d86b5b566444e1098a666909e3d86865c00f0b7c
[cascardo/linux.git] / drivers / net / wireless / rtlwifi / rtl8192ce / sw.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2009-2012  Realtek Corporation.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  * wlanfae <wlanfae@realtek.com>
23  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
24  * Hsinchu 300, Taiwan.
25  *
26  * Larry Finger <Larry.Finger@lwfinger.net>
27  *
28  *****************************************************************************/
29
30 #include "../wifi.h"
31 #include "../core.h"
32 #include "../pci.h"
33 #include "../base.h"
34 #include "reg.h"
35 #include "def.h"
36 #include "phy.h"
37 #include "dm.h"
38 #include "../rtl8192c/dm_common.h"
39 #include "../rtl8192c/fw_common.h"
40 #include "../rtl8192c/phy_common.h"
41 #include "hw.h"
42 #include "rf.h"
43 #include "sw.h"
44 #include "trx.h"
45 #include "led.h"
46
47 #include <linux/module.h>
48
49 static void rtl92c_init_aspm_vars(struct ieee80211_hw *hw)
50 {
51         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
52
53         /*close ASPM for AMD defaultly */
54         rtlpci->const_amdpci_aspm = 0;
55
56         /*
57          * ASPM PS mode.
58          * 0 - Disable ASPM,
59          * 1 - Enable ASPM without Clock Req,
60          * 2 - Enable ASPM with Clock Req,
61          * 3 - Alwyas Enable ASPM with Clock Req,
62          * 4 - Always Enable ASPM without Clock Req.
63          * set defult to RTL8192CE:3 RTL8192E:2
64          * */
65         rtlpci->const_pci_aspm = 3;
66
67         /*Setting for PCI-E device */
68         rtlpci->const_devicepci_aspm_setting = 0x03;
69
70         /*Setting for PCI-E bridge */
71         rtlpci->const_hostpci_aspm_setting = 0x02;
72
73         /*
74          * In Hw/Sw Radio Off situation.
75          * 0 - Default,
76          * 1 - From ASPM setting without low Mac Pwr,
77          * 2 - From ASPM setting with low Mac Pwr,
78          * 3 - Bus D3
79          * set default to RTL8192CE:0 RTL8192SE:2
80          */
81         rtlpci->const_hwsw_rfoff_d3 = 0;
82
83         /*
84          * This setting works for those device with
85          * backdoor ASPM setting such as EPHY setting.
86          * 0 - Not support ASPM,
87          * 1 - Support ASPM,
88          * 2 - According to chipset.
89          */
90         rtlpci->const_support_pciaspm = 1;
91 }
92
93 int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
94 {
95         int err;
96         struct rtl_priv *rtlpriv = rtl_priv(hw);
97         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
98         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
99
100         rtl8192ce_bt_reg_init(hw);
101
102         rtlpriv->dm.dm_initialgain_enable = true;
103         rtlpriv->dm.dm_flag = 0;
104         rtlpriv->dm.disable_framebursting = false;
105         rtlpriv->dm.thermalvalue = 0;
106         rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13);
107
108         /* compatible 5G band 88ce just 2.4G band & smsp */
109         rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
110         rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
111         rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
112
113         rtlpci->receive_config = (RCR_APPFCS |
114                                   RCR_AMF |
115                                   RCR_ADF |
116                                   RCR_APP_MIC |
117                                   RCR_APP_ICV |
118                                   RCR_AICV |
119                                   RCR_ACRC32 |
120                                   RCR_AB |
121                                   RCR_AM |
122                                   RCR_APM |
123                                   RCR_APP_PHYST_RXFF | RCR_HTC_LOC_CTRL | 0);
124
125         rtlpci->irq_mask[0] =
126             (u32) (IMR_ROK |
127                    IMR_VODOK |
128                    IMR_VIDOK |
129                    IMR_BEDOK |
130                    IMR_BKDOK |
131                    IMR_MGNTDOK |
132                    IMR_HIGHDOK | IMR_BDOK | IMR_RDU | IMR_RXFOVW | 0);
133
134         rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD | 0);
135
136         /* for debug level */
137         rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
138         /* for LPS & IPS */
139         rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
140         rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
141         rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
142         if (!rtlpriv->psc.inactiveps)
143                 pr_info("rtl8192ce: Power Save off (module option)\n");
144         if (!rtlpriv->psc.fwctrl_lps)
145                 pr_info("rtl8192ce: FW Power Save off (module option)\n");
146         rtlpriv->psc.reg_fwctrl_lps = 3;
147         rtlpriv->psc.reg_max_lps_awakeintvl = 5;
148         /* for ASPM, you can close aspm through
149          * set const_support_pciaspm = 0 */
150         rtl92c_init_aspm_vars(hw);
151
152         if (rtlpriv->psc.reg_fwctrl_lps == 1)
153                 rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
154         else if (rtlpriv->psc.reg_fwctrl_lps == 2)
155                 rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
156         else if (rtlpriv->psc.reg_fwctrl_lps == 3)
157                 rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
158
159         /* for firmware buf */
160         rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
161         if (!rtlpriv->rtlhal.pfirmware) {
162                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
163                          "Can't alloc buffer for fw\n");
164                 return 1;
165         }
166
167         /* request fw */
168         if (IS_VENDOR_UMC_A_CUT(rtlhal->version) &&
169             !IS_92C_SERIAL(rtlhal->version))
170                 rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU.bin";
171         else if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version))
172                 rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU_B.bin";
173
174         rtlpriv->max_fw_size = 0x4000;
175         pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
176         err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
177                                       rtlpriv->io.dev, GFP_KERNEL, hw,
178                                       rtl_fw_cb);
179         if (err) {
180                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
181                          "Failed to request firmware!\n");
182                 return 1;
183         }
184
185         return 0;
186 }
187
188 void rtl92c_deinit_sw_vars(struct ieee80211_hw *hw)
189 {
190         struct rtl_priv *rtlpriv = rtl_priv(hw);
191
192         if (rtlpriv->rtlhal.pfirmware) {
193                 vfree(rtlpriv->rtlhal.pfirmware);
194                 rtlpriv->rtlhal.pfirmware = NULL;
195         }
196 }
197
198 static struct rtl_hal_ops rtl8192ce_hal_ops = {
199         .init_sw_vars = rtl92c_init_sw_vars,
200         .deinit_sw_vars = rtl92c_deinit_sw_vars,
201         .read_eeprom_info = rtl92ce_read_eeprom_info,
202         .interrupt_recognized = rtl92ce_interrupt_recognized,
203         .hw_init = rtl92ce_hw_init,
204         .hw_disable = rtl92ce_card_disable,
205         .hw_suspend = rtl92ce_suspend,
206         .hw_resume = rtl92ce_resume,
207         .enable_interrupt = rtl92ce_enable_interrupt,
208         .disable_interrupt = rtl92ce_disable_interrupt,
209         .set_network_type = rtl92ce_set_network_type,
210         .set_chk_bssid = rtl92ce_set_check_bssid,
211         .set_qos = rtl92ce_set_qos,
212         .set_bcn_reg = rtl92ce_set_beacon_related_registers,
213         .set_bcn_intv = rtl92ce_set_beacon_interval,
214         .update_interrupt_mask = rtl92ce_update_interrupt_mask,
215         .get_hw_reg = rtl92ce_get_hw_reg,
216         .set_hw_reg = rtl92ce_set_hw_reg,
217         .update_rate_tbl = rtl92ce_update_hal_rate_tbl,
218         .fill_tx_desc = rtl92ce_tx_fill_desc,
219         .fill_tx_cmddesc = rtl92ce_tx_fill_cmddesc,
220         .query_rx_desc = rtl92ce_rx_query_desc,
221         .set_channel_access = rtl92ce_update_channel_access_setting,
222         .radio_onoff_checking = rtl92ce_gpio_radio_on_off_checking,
223         .set_bw_mode = rtl92c_phy_set_bw_mode,
224         .switch_channel = rtl92c_phy_sw_chnl,
225         .dm_watchdog = rtl92c_dm_watchdog,
226         .scan_operation_backup = rtl_phy_scan_operation_backup,
227         .set_rf_power_state = rtl92c_phy_set_rf_power_state,
228         .led_control = rtl92ce_led_control,
229         .set_desc = rtl92ce_set_desc,
230         .get_desc = rtl92ce_get_desc,
231         .tx_polling = rtl92ce_tx_polling,
232         .enable_hw_sec = rtl92ce_enable_hw_security_config,
233         .set_key = rtl92ce_set_key,
234         .init_sw_leds = rtl92ce_init_sw_leds,
235         .get_bbreg = rtl92c_phy_query_bb_reg,
236         .set_bbreg = rtl92c_phy_set_bb_reg,
237         .set_rfreg = rtl92ce_phy_set_rf_reg,
238         .get_rfreg = rtl92c_phy_query_rf_reg,
239         .phy_rf6052_config = rtl92ce_phy_rf6052_config,
240         .phy_rf6052_set_cck_txpower = rtl92ce_phy_rf6052_set_cck_txpower,
241         .phy_rf6052_set_ofdm_txpower = rtl92ce_phy_rf6052_set_ofdm_txpower,
242         .config_bb_with_headerfile = _rtl92ce_phy_config_bb_with_headerfile,
243         .config_bb_with_pgheaderfile = _rtl92ce_phy_config_bb_with_pgheaderfile,
244         .phy_lc_calibrate = _rtl92ce_phy_lc_calibrate,
245         .phy_set_bw_mode_callback = rtl92ce_phy_set_bw_mode_callback,
246         .dm_dynamic_txpower = rtl92ce_dm_dynamic_txpower,
247 };
248
249 static struct rtl_mod_params rtl92ce_mod_params = {
250         .sw_crypto = false,
251         .inactiveps = true,
252         .swctrl_lps = false,
253         .fwctrl_lps = true,
254         .debug = DBG_EMERG,
255 };
256
257 static struct rtl_hal_cfg rtl92ce_hal_cfg = {
258         .bar_id = 2,
259         .write_readback = true,
260         .name = "rtl92c_pci",
261         .fw_name = "rtlwifi/rtl8192cfw.bin",
262         .ops = &rtl8192ce_hal_ops,
263         .mod_params = &rtl92ce_mod_params,
264
265         .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
266         .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
267         .maps[SYS_CLK] = REG_SYS_CLKR,
268         .maps[MAC_RCR_AM] = AM,
269         .maps[MAC_RCR_AB] = AB,
270         .maps[MAC_RCR_ACRC32] = ACRC32,
271         .maps[MAC_RCR_ACF] = ACF,
272         .maps[MAC_RCR_AAP] = AAP,
273
274         .maps[EFUSE_TEST] = REG_EFUSE_TEST,
275         .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
276         .maps[EFUSE_CLK] = 0,
277         .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
278         .maps[EFUSE_PWC_EV12V] = PWC_EV12V,
279         .maps[EFUSE_FEN_ELDR] = FEN_ELDR,
280         .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
281         .maps[EFUSE_ANA8M] = EFUSE_ANA8M,
282         .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
283         .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
284         .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
285         .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
286
287         .maps[RWCAM] = REG_CAMCMD,
288         .maps[WCAMI] = REG_CAMWRITE,
289         .maps[RCAMO] = REG_CAMREAD,
290         .maps[CAMDBG] = REG_CAMDBG,
291         .maps[SECR] = REG_SECCFG,
292         .maps[SEC_CAM_NONE] = CAM_NONE,
293         .maps[SEC_CAM_WEP40] = CAM_WEP40,
294         .maps[SEC_CAM_TKIP] = CAM_TKIP,
295         .maps[SEC_CAM_AES] = CAM_AES,
296         .maps[SEC_CAM_WEP104] = CAM_WEP104,
297
298         .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
299         .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
300         .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
301         .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
302         .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
303         .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
304         .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
305         .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
306         .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
307         .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
308         .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
309         .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
310         .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
311         .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
312         .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
313         .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
314
315         .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
316         .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
317         .maps[RTL_IMR_BCNINT] = IMR_BCNINT,
318         .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
319         .maps[RTL_IMR_RDU] = IMR_RDU,
320         .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
321         .maps[RTL_IMR_BDOK] = IMR_BDOK,
322         .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
323         .maps[RTL_IMR_TBDER] = IMR_TBDER,
324         .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
325         .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
326         .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
327         .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
328         .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
329         .maps[RTL_IMR_VODOK] = IMR_VODOK,
330         .maps[RTL_IMR_ROK] = IMR_ROK,
331         .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
332
333         .maps[RTL_RC_CCK_RATE1M] = DESC92_RATE1M,
334         .maps[RTL_RC_CCK_RATE2M] = DESC92_RATE2M,
335         .maps[RTL_RC_CCK_RATE5_5M] = DESC92_RATE5_5M,
336         .maps[RTL_RC_CCK_RATE11M] = DESC92_RATE11M,
337         .maps[RTL_RC_OFDM_RATE6M] = DESC92_RATE6M,
338         .maps[RTL_RC_OFDM_RATE9M] = DESC92_RATE9M,
339         .maps[RTL_RC_OFDM_RATE12M] = DESC92_RATE12M,
340         .maps[RTL_RC_OFDM_RATE18M] = DESC92_RATE18M,
341         .maps[RTL_RC_OFDM_RATE24M] = DESC92_RATE24M,
342         .maps[RTL_RC_OFDM_RATE36M] = DESC92_RATE36M,
343         .maps[RTL_RC_OFDM_RATE48M] = DESC92_RATE48M,
344         .maps[RTL_RC_OFDM_RATE54M] = DESC92_RATE54M,
345
346         .maps[RTL_RC_HT_RATEMCS7] = DESC92_RATEMCS7,
347         .maps[RTL_RC_HT_RATEMCS15] = DESC92_RATEMCS15,
348 };
349
350 static const struct pci_device_id rtl92ce_pci_ids[] = {
351         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8191, rtl92ce_hal_cfg)},
352         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8178, rtl92ce_hal_cfg)},
353         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8177, rtl92ce_hal_cfg)},
354         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8176, rtl92ce_hal_cfg)},
355         {},
356 };
357
358 MODULE_DEVICE_TABLE(pci, rtl92ce_pci_ids);
359
360 MODULE_AUTHOR("lizhaoming       <chaoming_li@realsil.com.cn>");
361 MODULE_AUTHOR("Realtek WlanFAE  <wlanfae@realtek.com>");
362 MODULE_AUTHOR("Larry Finger     <Larry.Finger@lwfinger.net>");
363 MODULE_LICENSE("GPL");
364 MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n PCI wireless");
365 MODULE_FIRMWARE("rtlwifi/rtl8192cfw.bin");
366 MODULE_FIRMWARE("rtlwifi/rtl8192cfwU.bin");
367 MODULE_FIRMWARE("rtlwifi/rtl8192cfwU_B.bin");
368
369 module_param_named(swenc, rtl92ce_mod_params.sw_crypto, bool, 0444);
370 module_param_named(debug, rtl92ce_mod_params.debug, int, 0444);
371 module_param_named(ips, rtl92ce_mod_params.inactiveps, bool, 0444);
372 module_param_named(swlps, rtl92ce_mod_params.swctrl_lps, bool, 0444);
373 module_param_named(fwlps, rtl92ce_mod_params.fwctrl_lps, bool, 0444);
374 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
375 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
376 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
377 MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
378 MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
379
380 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
381
382 static struct pci_driver rtl92ce_driver = {
383         .name = KBUILD_MODNAME,
384         .id_table = rtl92ce_pci_ids,
385         .probe = rtl_pci_probe,
386         .remove = rtl_pci_disconnect,
387         .driver.pm = &rtlwifi_pm_ops,
388 };
389
390 module_pci_driver(rtl92ce_driver);