x86/smpboot: Init apic mapping before usage
[cascardo/linux.git] / drivers / phy / phy-mvebu-sata.c
1 /*
2  *      phy-mvebu-sata.c: SATA Phy driver for the Marvell mvebu SoCs.
3  *
4  *      Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
5  *
6  *      This program is free software; you can redistribute it and/or
7  *      modify it under the terms of the GNU General Public License
8  *      as published by the Free Software Foundation; either version
9  *      2 of the License, or (at your option) any later version.
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/clk.h>
15 #include <linux/phy/phy.h>
16 #include <linux/io.h>
17 #include <linux/platform_device.h>
18
19 struct priv {
20         struct clk      *clk;
21         void __iomem    *base;
22 };
23
24 #define SATA_PHY_MODE_2 0x0330
25 #define  MODE_2_FORCE_PU_TX     BIT(0)
26 #define  MODE_2_FORCE_PU_RX     BIT(1)
27 #define  MODE_2_PU_PLL          BIT(2)
28 #define  MODE_2_PU_IVREF        BIT(3)
29 #define SATA_IF_CTRL    0x0050
30 #define  CTRL_PHY_SHUTDOWN      BIT(9)
31
32 static int phy_mvebu_sata_power_on(struct phy *phy)
33 {
34         struct priv *priv = phy_get_drvdata(phy);
35         u32 reg;
36
37         clk_prepare_enable(priv->clk);
38
39         /* Enable PLL and IVREF */
40         reg = readl(priv->base + SATA_PHY_MODE_2);
41         reg |= (MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX |
42                 MODE_2_PU_PLL | MODE_2_PU_IVREF);
43         writel(reg , priv->base + SATA_PHY_MODE_2);
44
45         /* Enable PHY */
46         reg = readl(priv->base + SATA_IF_CTRL);
47         reg &= ~CTRL_PHY_SHUTDOWN;
48         writel(reg, priv->base + SATA_IF_CTRL);
49
50         clk_disable_unprepare(priv->clk);
51
52         return 0;
53 }
54
55 static int phy_mvebu_sata_power_off(struct phy *phy)
56 {
57         struct priv *priv = phy_get_drvdata(phy);
58         u32 reg;
59
60         clk_prepare_enable(priv->clk);
61
62         /* Disable PLL and IVREF */
63         reg = readl(priv->base + SATA_PHY_MODE_2);
64         reg &= ~(MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX |
65                  MODE_2_PU_PLL | MODE_2_PU_IVREF);
66         writel(reg, priv->base + SATA_PHY_MODE_2);
67
68         /* Disable PHY */
69         reg = readl(priv->base + SATA_IF_CTRL);
70         reg |= CTRL_PHY_SHUTDOWN;
71         writel(reg, priv->base + SATA_IF_CTRL);
72
73         clk_disable_unprepare(priv->clk);
74
75         return 0;
76 }
77
78 static const struct phy_ops phy_mvebu_sata_ops = {
79         .power_on       = phy_mvebu_sata_power_on,
80         .power_off      = phy_mvebu_sata_power_off,
81         .owner          = THIS_MODULE,
82 };
83
84 static int phy_mvebu_sata_probe(struct platform_device *pdev)
85 {
86         struct phy_provider *phy_provider;
87         struct resource *res;
88         struct priv *priv;
89         struct phy *phy;
90
91         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
92         if (!priv)
93                 return -ENOMEM;
94
95         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
96         priv->base = devm_ioremap_resource(&pdev->dev, res);
97         if (IS_ERR(priv->base))
98                 return PTR_ERR(priv->base);
99
100         priv->clk = devm_clk_get(&pdev->dev, "sata");
101         if (IS_ERR(priv->clk))
102                 return PTR_ERR(priv->clk);
103
104         phy = devm_phy_create(&pdev->dev, NULL, &phy_mvebu_sata_ops);
105         if (IS_ERR(phy))
106                 return PTR_ERR(phy);
107
108         phy_set_drvdata(phy, priv);
109
110         phy_provider = devm_of_phy_provider_register(&pdev->dev,
111                                                      of_phy_simple_xlate);
112         if (IS_ERR(phy_provider))
113                 return PTR_ERR(phy_provider);
114
115         /* The boot loader may of left it on. Turn it off. */
116         phy_mvebu_sata_power_off(phy);
117
118         return 0;
119 }
120
121 static const struct of_device_id phy_mvebu_sata_of_match[] = {
122         { .compatible = "marvell,mvebu-sata-phy" },
123         { },
124 };
125 MODULE_DEVICE_TABLE(of, phy_mvebu_sata_of_match);
126
127 static struct platform_driver phy_mvebu_sata_driver = {
128         .probe  = phy_mvebu_sata_probe,
129         .driver = {
130                 .name   = "phy-mvebu-sata",
131                 .of_match_table = phy_mvebu_sata_of_match,
132         }
133 };
134 module_platform_driver(phy_mvebu_sata_driver);
135
136 MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
137 MODULE_DESCRIPTION("Marvell MVEBU SATA PHY driver");
138 MODULE_LICENSE("GPL v2");