drivers/phy/phy-sun4i-usb.c

   1 /*
   2  * Allwinner sun4i USB phy driver
   3  *
   4  * Copyright (C) 2014-2015 Hans de Goede <hdegoede@redhat.com>
   5  *
   6  * Based on code from
   7  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   8  *
   9  * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
  10  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
  11  * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  */
  23
  24 #include <linux/clk.h>
  25 #include <linux/delay.h>
  26 #include <linux/err.h>
  27 #include <linux/extcon.h>
  28 #include <linux/io.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/mutex.h>
  33 #include <linux/of.h>
  34 #include <linux/of_address.h>
  35 #include <linux/of_device.h>
  36 #include <linux/of_gpio.h>
  37 #include <linux/phy/phy.h>
  38 #include <linux/phy/phy-sun4i-usb.h>
  39 #include <linux/platform_device.h>
  40 #include <linux/power_supply.h>
  41 #include <linux/regulator/consumer.h>
  42 #include <linux/reset.h>
  43 #include <linux/workqueue.h>
  44
  45 #define REG_ISCR                        0x00
  46 #define REG_PHYCTL_A10                  0x04
  47 #define REG_PHYBIST                     0x08
  48 #define REG_PHYTUNE                     0x0c
  49 #define REG_PHYCTL_A33                  0x10
  50 #define REG_PHY_UNK_H3                  0x20
  51
  52 #define REG_PMU_UNK_H3                  0x10
  53
  54 #define PHYCTL_DATA                     BIT(7)
  55
  56 #define SUNXI_AHB_ICHR8_EN              BIT(10)
  57 #define SUNXI_AHB_INCR4_BURST_EN        BIT(9)
  58 #define SUNXI_AHB_INCRX_ALIGN_EN        BIT(8)
  59 #define SUNXI_ULPI_BYPASS_EN            BIT(0)
  60
  61 /* ISCR, Interface Status and Control bits */
  62 #define ISCR_ID_PULLUP_EN               (1 << 17)
  63 #define ISCR_DPDM_PULLUP_EN     (1 << 16)
  64 /* sunxi has the phy id/vbus pins not connected, so we use the force bits */
  65 #define ISCR_FORCE_ID_MASK      (3 << 14)
  66 #define ISCR_FORCE_ID_LOW               (2 << 14)
  67 #define ISCR_FORCE_ID_HIGH      (3 << 14)
  68 #define ISCR_FORCE_VBUS_MASK    (3 << 12)
  69 #define ISCR_FORCE_VBUS_LOW     (2 << 12)
  70 #define ISCR_FORCE_VBUS_HIGH    (3 << 12)
  71
  72 /* Common Control Bits for Both PHYs */
  73 #define PHY_PLL_BW                      0x03
  74 #define PHY_RES45_CAL_EN                0x0c
  75
  76 /* Private Control Bits for Each PHY */
  77 #define PHY_TX_AMPLITUDE_TUNE           0x20
  78 #define PHY_TX_SLEWRATE_TUNE            0x22
  79 #define PHY_VBUSVALID_TH_SEL            0x25
  80 #define PHY_PULLUP_RES_SEL              0x27
  81 #define PHY_OTG_FUNC_EN                 0x28
  82 #define PHY_VBUS_DET_EN                 0x29
  83 #define PHY_DISCON_TH_SEL               0x2a
  84 #define PHY_SQUELCH_DETECT              0x3c
  85
  86 #define MAX_PHYS                        4
  87
  88 /*
  89  * Note do not raise the debounce time, we must report Vusb high within 100ms
  90  * otherwise we get Vbus errors
  91  */
  92 #define DEBOUNCE_TIME                   msecs_to_jiffies(50)
  93 #define POLL_TIME                       msecs_to_jiffies(250)
  94
  95 enum sun4i_usb_phy_type {
  96         sun4i_a10_phy,
  97         sun8i_a33_phy,
  98         sun8i_h3_phy,
  99 };
 100
 101 struct sun4i_usb_phy_cfg {
 102         int num_phys;
 103         enum sun4i_usb_phy_type type;
 104         u32 disc_thresh;
 105         u8 phyctl_offset;
 106         bool dedicated_clocks;
 107 };
 108
 109 struct sun4i_usb_phy_data {
 110         void __iomem *base;
 111         const struct sun4i_usb_phy_cfg *cfg;
 112         struct mutex mutex;
 113         struct sun4i_usb_phy {
 114                 struct phy *phy;
 115                 void __iomem *pmu;
 116                 struct regulator *vbus;
 117                 struct reset_control *reset;
 118                 struct clk *clk;
 119                 bool regulator_on;
 120                 int index;
 121         } phys[MAX_PHYS];
 122         /* phy0 / otg related variables */
 123         struct extcon_dev *extcon;
 124         bool phy0_init;
 125         bool phy0_poll;
 126         struct gpio_desc *id_det_gpio;
 127         struct gpio_desc *vbus_det_gpio;
 128         struct power_supply *vbus_power_supply;
 129         struct notifier_block vbus_power_nb;
 130         bool vbus_power_nb_registered;
 131         int id_det_irq;
 132         int vbus_det_irq;
 133         int id_det;
 134         int vbus_det;
 135         struct delayed_work detect;
 136 };
 137
 138 #define to_sun4i_usb_phy_data(phy) \
 139         container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
 140
 141 static void sun4i_usb_phy0_update_iscr(struct phy *_phy, u32 clr, u32 set)
 142 {
 143         struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 144         struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 145         u32 iscr;
 146
 147         iscr = readl(data->base + REG_ISCR);
 148         iscr &= ~clr;
 149         iscr |= set;
 150         writel(iscr, data->base + REG_ISCR);
 151 }
 152
 153 static void sun4i_usb_phy0_set_id_detect(struct phy *phy, u32 val)
 154 {
 155         if (val)
 156                 val = ISCR_FORCE_ID_HIGH;
 157         else
 158                 val = ISCR_FORCE_ID_LOW;
 159
 160         sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_ID_MASK, val);
 161 }
 162
 163 static void sun4i_usb_phy0_set_vbus_detect(struct phy *phy, u32 val)
 164 {
 165         if (val)
 166                 val = ISCR_FORCE_VBUS_HIGH;
 167         else
 168                 val = ISCR_FORCE_VBUS_LOW;
 169
 170         sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_VBUS_MASK, val);
 171 }
 172
 173 static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 174                                 int len)
 175 {
 176         struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
 177         u32 temp, usbc_bit = BIT(phy->index * 2);
 178         void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
 179         int i;
 180
 181         mutex_lock(&phy_data->mutex);
 182
 183         if (phy_data->cfg->type == sun8i_a33_phy) {
 184                 /* A33 needs us to set phyctl to 0 explicitly */
 185                 writel(0, phyctl);
 186         }
 187
 188         for (i = 0; i < len; i++) {
 189                 temp = readl(phyctl);
 190
 191                 /* clear the address portion */
 192                 temp &= ~(0xff << 8);
 193
 194                 /* set the address */
 195                 temp |= ((addr + i) << 8);
 196                 writel(temp, phyctl);
 197
 198                 /* set the data bit and clear usbc bit*/
 199                 temp = readb(phyctl);
 200                 if (data & 0x1)
 201                         temp |= PHYCTL_DATA;
 202                 else
 203                         temp &= ~PHYCTL_DATA;
 204                 temp &= ~usbc_bit;
 205                 writeb(temp, phyctl);
 206
 207                 /* pulse usbc_bit */
 208                 temp = readb(phyctl);
 209                 temp |= usbc_bit;
 210                 writeb(temp, phyctl);
 211
 212                 temp = readb(phyctl);
 213                 temp &= ~usbc_bit;
 214                 writeb(temp, phyctl);
 215
 216                 data >>= 1;
 217         }
 218         mutex_unlock(&phy_data->mutex);
 219 }
 220
 221 static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
 222 {
 223         u32 bits, reg_value;
 224
 225         if (!phy->pmu)
 226                 return;
 227
 228         bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
 229                 SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
 230
 231         reg_value = readl(phy->pmu);
 232
 233         if (enable)
 234                 reg_value |= bits;
 235         else
 236                 reg_value &= ~bits;
 237
 238         writel(reg_value, phy->pmu);
 239 }
 240
 241 static int sun4i_usb_phy_init(struct phy *_phy)
 242 {
 243         struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 244         struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 245         int ret;
 246         u32 val;
 247
 248         ret = clk_prepare_enable(phy->clk);
 249         if (ret)
 250                 return ret;
 251
 252         ret = reset_control_deassert(phy->reset);
 253         if (ret) {
 254                 clk_disable_unprepare(phy->clk);
 255                 return ret;
 256         }
 257
 258         if (data->cfg->type == sun8i_h3_phy) {
 259                 if (phy->index == 0) {
 260                         val = readl(data->base + REG_PHY_UNK_H3);
 261                         writel(val & ~1, data->base + REG_PHY_UNK_H3);
 262                 }
 263
 264                 val = readl(phy->pmu + REG_PMU_UNK_H3);
 265                 writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
 266         } else {
 267                 /* Enable USB 45 Ohm resistor calibration */
 268                 if (phy->index == 0)
 269                         sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
 270
 271                 /* Adjust PHY's magnitude and rate */
 272                 sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
 273
 274                 /* Disconnect threshold adjustment */
 275                 sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
 276                                     data->cfg->disc_thresh, 2);
 277         }
 278
 279         sun4i_usb_phy_passby(phy, 1);
 280
 281         if (phy->index == 0) {
 282                 data->phy0_init = true;
 283
 284                 /* Enable pull-ups */
 285                 sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
 286                 sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);
 287
 288                 if (data->id_det_gpio) {
 289                         /* OTG mode, force ISCR and cable state updates */
 290                         data->id_det = -1;
 291                         data->vbus_det = -1;
 292                         queue_delayed_work(system_wq, &data->detect, 0);
 293                 } else {
 294                         /* Host only mode */
 295                         sun4i_usb_phy0_set_id_detect(_phy, 0);
 296                         sun4i_usb_phy0_set_vbus_detect(_phy, 1);
 297                 }
 298         }
 299
 300         return 0;
 301 }
 302
 303 static int sun4i_usb_phy_exit(struct phy *_phy)
 304 {
 305         struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 306         struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 307
 308         if (phy->index == 0) {
 309                 /* Disable pull-ups */
 310                 sun4i_usb_phy0_update_iscr(_phy, ISCR_DPDM_PULLUP_EN, 0);
 311                 sun4i_usb_phy0_update_iscr(_phy, ISCR_ID_PULLUP_EN, 0);
 312                 data->phy0_init = false;
 313         }
 314
 315         sun4i_usb_phy_passby(phy, 0);
 316         reset_control_assert(phy->reset);
 317         clk_disable_unprepare(phy->clk);
 318
 319         return 0;
 320 }
 321
 322 static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
 323 {
 324         if (data->vbus_det_gpio)
 325                 return gpiod_get_value_cansleep(data->vbus_det_gpio);
 326
 327         if (data->vbus_power_supply) {
 328                 union power_supply_propval val;
 329                 int r;
 330
 331                 r = power_supply_get_property(data->vbus_power_supply,
 332                                               POWER_SUPPLY_PROP_PRESENT, &val);
 333                 if (r == 0)
 334                         return val.intval;
 335         }
 336
 337         /* Fallback: report vbus as high */
 338         return 1;
 339 }
 340
 341 static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data)
 342 {
 343         return data->vbus_det_gpio || data->vbus_power_supply;
 344 }
 345
 346 static int sun4i_usb_phy_power_on(struct phy *_phy)
 347 {
 348         struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 349         struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 350         int ret;
 351
 352         if (!phy->vbus || phy->regulator_on)
 353                 return 0;
 354
 355         /* For phy0 only turn on Vbus if we don't have an ext. Vbus */
 356         if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
 357                                 data->vbus_det)
 358                 return 0;
 359
 360         ret = regulator_enable(phy->vbus);
 361         if (ret)
 362                 return ret;
 363
 364         phy->regulator_on = true;
 365
 366         /* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */
 367         if (phy->index == 0 && data->vbus_det_gpio && data->phy0_poll)
 368                 mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
 369
 370         return 0;
 371 }
 372
 373 static int sun4i_usb_phy_power_off(struct phy *_phy)
 374 {
 375         struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 376         struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 377
 378         if (!phy->vbus || !phy->regulator_on)
 379                 return 0;
 380
 381         regulator_disable(phy->vbus);
 382         phy->regulator_on = false;
 383
 384         /*
 385          * phy0 vbus typically slowly discharges, sometimes this causes the
 386          * Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan.
 387          */
 388         if (phy->index == 0 && data->vbus_det_gpio && !data->phy0_poll)
 389                 mod_delayed_work(system_wq, &data->detect, POLL_TIME);
 390
 391         return 0;
 392 }
 393
 394 void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
 395 {
 396         struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 397
 398         sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
 399 }
 400 EXPORT_SYMBOL_GPL(sun4i_usb_phy_set_squelch_detect);
 401
 402 static const struct phy_ops sun4i_usb_phy_ops = {
 403         .init           = sun4i_usb_phy_init,
 404         .exit           = sun4i_usb_phy_exit,
 405         .power_on       = sun4i_usb_phy_power_on,
 406         .power_off      = sun4i_usb_phy_power_off,
 407         .owner          = THIS_MODULE,
 408 };
 409
 410 static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 411 {
 412         struct sun4i_usb_phy_data *data =
 413                 container_of(work, struct sun4i_usb_phy_data, detect.work);
 414         struct phy *phy0 = data->phys[0].phy;
 415         int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
 416
 417         id_det = gpiod_get_value_cansleep(data->id_det_gpio);
 418         vbus_det = sun4i_usb_phy0_get_vbus_det(data);
 419
 420         mutex_lock(&phy0->mutex);
 421
 422         if (!data->phy0_init) {
 423                 mutex_unlock(&phy0->mutex);
 424                 return;
 425         }
 426
 427         if (id_det != data->id_det) {
 428                 /*
 429                  * When a host cable (id == 0) gets plugged in on systems
 430                  * without vbus detection report vbus low for long enough for
 431                  * the musb-ip to end the current device session.
 432                  */
 433                 if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
 434                         sun4i_usb_phy0_set_vbus_detect(phy0, 0);
 435                         msleep(200);
 436                         sun4i_usb_phy0_set_vbus_detect(phy0, 1);
 437                 }
 438                 sun4i_usb_phy0_set_id_detect(phy0, id_det);
 439                 data->id_det = id_det;
 440                 id_notify = 1;
 441         }
 442
 443         if (vbus_det != data->vbus_det) {
 444                 sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
 445                 data->vbus_det = vbus_det;
 446                 vbus_notify = 1;
 447         }
 448
 449         mutex_unlock(&phy0->mutex);
 450
 451         if (id_notify) {
 452                 extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
 453                                         !id_det);
 454                 /*
 455                  * When a host cable gets unplugged (id == 1) on systems
 456                  * without vbus detection report vbus low for long enough to
 457                  * the musb-ip to end the current host session.
 458                  */
 459                 if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
 460                         mutex_lock(&phy0->mutex);
 461                         sun4i_usb_phy0_set_vbus_detect(phy0, 0);
 462                         msleep(1000);
 463                         sun4i_usb_phy0_set_vbus_detect(phy0, 1);
 464                         mutex_unlock(&phy0->mutex);
 465                 }
 466         }
 467
 468         if (vbus_notify)
 469                 extcon_set_cable_state_(data->extcon, EXTCON_USB, vbus_det);
 470
 471         if (data->phy0_poll)
 472                 queue_delayed_work(system_wq, &data->detect, POLL_TIME);
 473 }
 474
 475 static irqreturn_t sun4i_usb_phy0_id_vbus_det_irq(int irq, void *dev_id)
 476 {
 477         struct sun4i_usb_phy_data *data = dev_id;
 478
 479         /* vbus or id changed, let the pins settle and then scan them */
 480         mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
 481
 482         return IRQ_HANDLED;
 483 }
 484
 485 static int sun4i_usb_phy0_vbus_notify(struct notifier_block *nb,
 486                                       unsigned long val, void *v)
 487 {
 488         struct sun4i_usb_phy_data *data =
 489                 container_of(nb, struct sun4i_usb_phy_data, vbus_power_nb);
 490         struct power_supply *psy = v;
 491
 492         /* Properties on the vbus_power_supply changed, scan vbus_det */
 493         if (val == PSY_EVENT_PROP_CHANGED && psy == data->vbus_power_supply)
 494                 mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
 495
 496         return NOTIFY_OK;
 497 }
 498
 499 static struct phy *sun4i_usb_phy_xlate(struct device *dev,
 500                                         struct of_phandle_args *args)
 501 {
 502         struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
 503
 504         if (args->args[0] >= data->cfg->num_phys)
 505                 return ERR_PTR(-ENODEV);
 506
 507         return data->phys[args->args[0]].phy;
 508 }
 509
 510 static int sun4i_usb_phy_remove(struct platform_device *pdev)
 511 {
 512         struct device *dev = &pdev->dev;
 513         struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
 514
 515         if (data->vbus_power_nb_registered)
 516                 power_supply_unreg_notifier(&data->vbus_power_nb);
 517         if (data->id_det_irq >= 0)
 518                 devm_free_irq(dev, data->id_det_irq, data);
 519         if (data->vbus_det_irq >= 0)
 520                 devm_free_irq(dev, data->vbus_det_irq, data);
 521
 522         cancel_delayed_work_sync(&data->detect);
 523
 524         return 0;
 525 }
 526
 527 static const unsigned int sun4i_usb_phy0_cable[] = {
 528         EXTCON_USB,
 529         EXTCON_USB_HOST,
 530         EXTCON_NONE,
 531 };
 532
 533 static int sun4i_usb_phy_probe(struct platform_device *pdev)
 534 {
 535         struct sun4i_usb_phy_data *data;
 536         struct device *dev = &pdev->dev;
 537         struct device_node *np = dev->of_node;
 538         struct phy_provider *phy_provider;
 539         struct resource *res;
 540         int i, ret;
 541
 542         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 543         if (!data)
 544                 return -ENOMEM;
 545
 546         mutex_init(&data->mutex);
 547         INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
 548         dev_set_drvdata(dev, data);
 549         data->cfg = of_device_get_match_data(dev);
 550         if (!data->cfg)
 551                 return -EINVAL;
 552
 553         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
 554         data->base = devm_ioremap_resource(dev, res);
 555         if (IS_ERR(data->base))
 556                 return PTR_ERR(data->base);
 557
 558         data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
 559                                                     GPIOD_IN);
 560         if (IS_ERR(data->id_det_gpio))
 561                 return PTR_ERR(data->id_det_gpio);
 562
 563         data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
 564                                                       GPIOD_IN);
 565         if (IS_ERR(data->vbus_det_gpio))
 566                 return PTR_ERR(data->vbus_det_gpio);
 567
 568         if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
 569                 data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
 570                                                      "usb0_vbus_power-supply");
 571                 if (IS_ERR(data->vbus_power_supply))
 572                         return PTR_ERR(data->vbus_power_supply);
 573
 574                 if (!data->vbus_power_supply)
 575                         return -EPROBE_DEFER;
 576         }
 577
 578         /* vbus_det without id_det makes no sense, and is not supported */
 579         if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) {
 580                 dev_err(dev, "usb0_id_det missing or invalid\n");
 581                 return -ENODEV;
 582         }
 583
 584         if (data->id_det_gpio) {
 585                 data->extcon = devm_extcon_dev_allocate(dev,
 586                                                         sun4i_usb_phy0_cable);
 587                 if (IS_ERR(data->extcon))
 588                         return PTR_ERR(data->extcon);
 589
 590                 ret = devm_extcon_dev_register(dev, data->extcon);
 591                 if (ret) {
 592                         dev_err(dev, "failed to register extcon: %d\n", ret);
 593                         return ret;
 594                 }
 595         }
 596
 597         for (i = 0; i < data->cfg->num_phys; i++) {
 598                 struct sun4i_usb_phy *phy = data->phys + i;
 599                 char name[16];
 600
 601                 snprintf(name, sizeof(name), "usb%d_vbus", i);
 602                 phy->vbus = devm_regulator_get_optional(dev, name);
 603                 if (IS_ERR(phy->vbus)) {
 604                         if (PTR_ERR(phy->vbus) == -EPROBE_DEFER)
 605                                 return -EPROBE_DEFER;
 606                         phy->vbus = NULL;
 607                 }
 608
 609                 if (data->cfg->dedicated_clocks)
 610                         snprintf(name, sizeof(name), "usb%d_phy", i);
 611                 else
 612                         strlcpy(name, "usb_phy", sizeof(name));
 613
 614                 phy->clk = devm_clk_get(dev, name);
 615                 if (IS_ERR(phy->clk)) {
 616                         dev_err(dev, "failed to get clock %s\n", name);
 617                         return PTR_ERR(phy->clk);
 618                 }
 619
 620                 snprintf(name, sizeof(name), "usb%d_reset", i);
 621                 phy->reset = devm_reset_control_get(dev, name);
 622                 if (IS_ERR(phy->reset)) {
 623                         dev_err(dev, "failed to get reset %s\n", name);
 624                         return PTR_ERR(phy->reset);
 625                 }
 626
 627                 if (i) { /* No pmu for usbc0 */
 628                         snprintf(name, sizeof(name), "pmu%d", i);
 629                         res = platform_get_resource_byname(pdev,
 630                                                         IORESOURCE_MEM, name);
 631                         phy->pmu = devm_ioremap_resource(dev, res);
 632                         if (IS_ERR(phy->pmu))
 633                                 return PTR_ERR(phy->pmu);
 634                 }
 635
 636                 phy->phy = devm_phy_create(dev, NULL, &sun4i_usb_phy_ops);
 637                 if (IS_ERR(phy->phy)) {
 638                         dev_err(dev, "failed to create PHY %d\n", i);
 639                         return PTR_ERR(phy->phy);
 640                 }
 641
 642                 phy->index = i;
 643                 phy_set_drvdata(phy->phy, &data->phys[i]);
 644         }
 645
 646         data->id_det_irq = gpiod_to_irq(data->id_det_gpio);
 647         data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
 648         if ((data->id_det_gpio && data->id_det_irq < 0) ||
 649             (data->vbus_det_gpio && data->vbus_det_irq < 0))
 650                 data->phy0_poll = true;
 651
 652         if (data->id_det_irq >= 0) {
 653                 ret = devm_request_irq(dev, data->id_det_irq,
 654                                 sun4i_usb_phy0_id_vbus_det_irq,
 655                                 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 656                                 "usb0-id-det", data);
 657                 if (ret) {
 658                         dev_err(dev, "Err requesting id-det-irq: %d\n", ret);
 659                         return ret;
 660                 }
 661         }
 662
 663         if (data->vbus_det_irq >= 0) {
 664                 ret = devm_request_irq(dev, data->vbus_det_irq,
 665                                 sun4i_usb_phy0_id_vbus_det_irq,
 666                                 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 667                                 "usb0-vbus-det", data);
 668                 if (ret) {
 669                         dev_err(dev, "Err requesting vbus-det-irq: %d\n", ret);
 670                         data->vbus_det_irq = -1;
 671                         sun4i_usb_phy_remove(pdev); /* Stop detect work */
 672                         return ret;
 673                 }
 674         }
 675
 676         if (data->vbus_power_supply) {
 677                 data->vbus_power_nb.notifier_call = sun4i_usb_phy0_vbus_notify;
 678                 data->vbus_power_nb.priority = 0;
 679                 ret = power_supply_reg_notifier(&data->vbus_power_nb);
 680                 if (ret) {
 681                         sun4i_usb_phy_remove(pdev); /* Stop detect work */
 682                         return ret;
 683                 }
 684                 data->vbus_power_nb_registered = true;
 685         }
 686
 687         phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate);
 688         if (IS_ERR(phy_provider)) {
 689                 sun4i_usb_phy_remove(pdev); /* Stop detect work */
 690                 return PTR_ERR(phy_provider);
 691         }
 692
 693         return 0;
 694 }
 695
 696 static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 697         .num_phys = 3,
 698         .type = sun4i_a10_phy,
 699         .disc_thresh = 3,
 700         .phyctl_offset = REG_PHYCTL_A10,
 701         .dedicated_clocks = false,
 702 };
 703
 704 static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
 705         .num_phys = 2,
 706         .type = sun4i_a10_phy,
 707         .disc_thresh = 2,
 708         .phyctl_offset = REG_PHYCTL_A10,
 709         .dedicated_clocks = false,
 710 };
 711
 712 static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
 713         .num_phys = 3,
 714         .type = sun4i_a10_phy,
 715         .disc_thresh = 3,
 716         .phyctl_offset = REG_PHYCTL_A10,
 717         .dedicated_clocks = true,
 718 };
 719
 720 static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
 721         .num_phys = 3,
 722         .type = sun4i_a10_phy,
 723         .disc_thresh = 2,
 724         .phyctl_offset = REG_PHYCTL_A10,
 725         .dedicated_clocks = false,
 726 };
 727
 728 static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
 729         .num_phys = 2,
 730         .type = sun4i_a10_phy,
 731         .disc_thresh = 3,
 732         .phyctl_offset = REG_PHYCTL_A10,
 733         .dedicated_clocks = true,
 734 };
 735
 736 static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
 737         .num_phys = 2,
 738         .type = sun8i_a33_phy,
 739         .disc_thresh = 3,
 740         .phyctl_offset = REG_PHYCTL_A33,
 741         .dedicated_clocks = true,
 742 };
 743
 744 static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
 745         .num_phys = 4,
 746         .type = sun8i_h3_phy,
 747         .disc_thresh = 3,
 748         .dedicated_clocks = true,
 749 };
 750
 751 static const struct of_device_id sun4i_usb_phy_of_match[] = {
 752         { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 753         { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
 754         { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
 755         { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
 756         { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
 757         { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
 758         { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
 759         { },
 760 };
 761 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
 762
 763 static struct platform_driver sun4i_usb_phy_driver = {
 764         .probe  = sun4i_usb_phy_probe,
 765         .remove = sun4i_usb_phy_remove,
 766         .driver = {
 767                 .of_match_table = sun4i_usb_phy_of_match,
 768                 .name  = "sun4i-usb-phy",
 769         }
 770 };
 771 module_platform_driver(sun4i_usb_phy_driver);
 772
 773 MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
 774 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
 775 MODULE_LICENSE("GPL v2");