x86/smpboot: Init apic mapping before usage
[cascardo/linux.git] / drivers / remoteproc / da8xx_remoteproc.c
1 /*
2  * Remote processor machine-specific module for DA8XX
3  *
4  * Copyright (C) 2013 Texas Instruments, Inc.
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  */
10
11 #include <linux/bitops.h>
12 #include <linux/clk.h>
13 #include <linux/err.h>
14 #include <linux/interrupt.h>
15 #include <linux/io.h>
16 #include <linux/irq.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/remoteproc.h>
21
22 #include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
23
24 #include "remoteproc_internal.h"
25
26 static char *da8xx_fw_name;
27 module_param(da8xx_fw_name, charp, S_IRUGO);
28 MODULE_PARM_DESC(da8xx_fw_name,
29                  "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')");
30
31 /*
32  * OMAP-L138 Technical References:
33  * http://www.ti.com/product/omap-l138
34  */
35 #define SYSCFG_CHIPSIG0 BIT(0)
36 #define SYSCFG_CHIPSIG1 BIT(1)
37 #define SYSCFG_CHIPSIG2 BIT(2)
38 #define SYSCFG_CHIPSIG3 BIT(3)
39 #define SYSCFG_CHIPSIG4 BIT(4)
40
41 /**
42  * struct da8xx_rproc - da8xx remote processor instance state
43  * @rproc: rproc handle
44  * @dsp_clk: placeholder for platform's DSP clk
45  * @ack_fxn: chip-specific ack function for ack'ing irq
46  * @irq_data: ack_fxn function parameter
47  * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR)
48  * @bootreg: virt ptr to DSP boot address register (HOST1CFG)
49  * @irq: irq # used by this instance
50  */
51 struct da8xx_rproc {
52         struct rproc *rproc;
53         struct clk *dsp_clk;
54         void (*ack_fxn)(struct irq_data *data);
55         struct irq_data *irq_data;
56         void __iomem *chipsig;
57         void __iomem *bootreg;
58         int irq;
59 };
60
61 /**
62  * handle_event() - inbound virtqueue message workqueue function
63  *
64  * This function is registered as a kernel thread and is scheduled by the
65  * kernel handler.
66  */
67 static irqreturn_t handle_event(int irq, void *p)
68 {
69         struct rproc *rproc = (struct rproc *)p;
70
71         /* Process incoming buffers on all our vrings */
72         rproc_vq_interrupt(rproc, 0);
73         rproc_vq_interrupt(rproc, 1);
74
75         return IRQ_HANDLED;
76 }
77
78 /**
79  * da8xx_rproc_callback() - inbound virtqueue message handler
80  *
81  * This handler is invoked directly by the kernel whenever the remote
82  * core (DSP) has modified the state of a virtqueue.  There is no
83  * "payload" message indicating the virtqueue index as is the case with
84  * mailbox-based implementations on OMAP4.  As such, this handler "polls"
85  * each known virtqueue index for every invocation.
86  */
87 static irqreturn_t da8xx_rproc_callback(int irq, void *p)
88 {
89         struct rproc *rproc = (struct rproc *)p;
90         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
91         u32 chipsig;
92
93         chipsig = readl(drproc->chipsig);
94         if (chipsig & SYSCFG_CHIPSIG0) {
95                 /* Clear interrupt level source */
96                 writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4);
97
98                 /*
99                  * ACK intr to AINTC.
100                  *
101                  * It has already been ack'ed by the kernel before calling
102                  * this function, but since the ARM<->DSP interrupts in the
103                  * CHIPSIG register are "level" instead of "pulse" variety,
104                  * we need to ack it after taking down the level else we'll
105                  * be called again immediately after returning.
106                  */
107                 drproc->ack_fxn(drproc->irq_data);
108
109                 return IRQ_WAKE_THREAD;
110         }
111
112         return IRQ_HANDLED;
113 }
114
115 static int da8xx_rproc_start(struct rproc *rproc)
116 {
117         struct device *dev = rproc->dev.parent;
118         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
119         struct clk *dsp_clk = drproc->dsp_clk;
120
121         /* hw requires the start (boot) address be on 1KB boundary */
122         if (rproc->bootaddr & 0x3ff) {
123                 dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
124
125                 return -EINVAL;
126         }
127
128         writel(rproc->bootaddr, drproc->bootreg);
129
130         clk_enable(dsp_clk);
131         davinci_clk_reset_deassert(dsp_clk);
132
133         return 0;
134 }
135
136 static int da8xx_rproc_stop(struct rproc *rproc)
137 {
138         struct da8xx_rproc *drproc = rproc->priv;
139
140         clk_disable(drproc->dsp_clk);
141
142         return 0;
143 }
144
145 /* kick a virtqueue */
146 static void da8xx_rproc_kick(struct rproc *rproc, int vqid)
147 {
148         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
149
150         /* Interrupt remote proc */
151         writel(SYSCFG_CHIPSIG2, drproc->chipsig);
152 }
153
154 static struct rproc_ops da8xx_rproc_ops = {
155         .start = da8xx_rproc_start,
156         .stop = da8xx_rproc_stop,
157         .kick = da8xx_rproc_kick,
158 };
159
160 static int reset_assert(struct device *dev)
161 {
162         struct clk *dsp_clk;
163
164         dsp_clk = clk_get(dev, NULL);
165         if (IS_ERR(dsp_clk)) {
166                 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
167                 return PTR_ERR(dsp_clk);
168         }
169
170         davinci_clk_reset_assert(dsp_clk);
171         clk_put(dsp_clk);
172
173         return 0;
174 }
175
176 static int da8xx_rproc_probe(struct platform_device *pdev)
177 {
178         struct device *dev = &pdev->dev;
179         struct da8xx_rproc *drproc;
180         struct rproc *rproc;
181         struct irq_data *irq_data;
182         struct resource *bootreg_res;
183         struct resource *chipsig_res;
184         struct clk *dsp_clk;
185         void __iomem *chipsig;
186         void __iomem *bootreg;
187         int irq;
188         int ret;
189
190         irq = platform_get_irq(pdev, 0);
191         if (irq < 0) {
192                 dev_err(dev, "platform_get_irq(pdev, 0) error: %d\n", irq);
193                 return irq;
194         }
195
196         irq_data = irq_get_irq_data(irq);
197         if (!irq_data) {
198                 dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq);
199                 return -EINVAL;
200         }
201
202         bootreg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
203         bootreg = devm_ioremap_resource(dev, bootreg_res);
204         if (IS_ERR(bootreg))
205                 return PTR_ERR(bootreg);
206
207         chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
208         chipsig = devm_ioremap_resource(dev, chipsig_res);
209         if (IS_ERR(chipsig))
210                 return PTR_ERR(chipsig);
211
212         dsp_clk = devm_clk_get(dev, NULL);
213         if (IS_ERR(dsp_clk)) {
214                 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
215
216                 return PTR_ERR(dsp_clk);
217         }
218
219         rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
220                 sizeof(*drproc));
221         if (!rproc)
222                 return -ENOMEM;
223
224         drproc = rproc->priv;
225         drproc->rproc = rproc;
226         rproc->has_iommu = false;
227
228         platform_set_drvdata(pdev, rproc);
229
230         /* everything the ISR needs is now setup, so hook it up */
231         ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback,
232                                         handle_event, 0, "da8xx-remoteproc",
233                                         rproc);
234         if (ret) {
235                 dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
236                 goto free_rproc;
237         }
238
239         /*
240          * rproc_add() can end up enabling the DSP's clk with the DSP
241          * *not* in reset, but da8xx_rproc_start() needs the DSP to be
242          * held in reset at the time it is called.
243          */
244         ret = reset_assert(dev);
245         if (ret)
246                 goto free_rproc;
247
248         drproc->chipsig = chipsig;
249         drproc->bootreg = bootreg;
250         drproc->ack_fxn = irq_data->chip->irq_ack;
251         drproc->irq_data = irq_data;
252         drproc->irq = irq;
253         drproc->dsp_clk = dsp_clk;
254
255         ret = rproc_add(rproc);
256         if (ret) {
257                 dev_err(dev, "rproc_add failed: %d\n", ret);
258                 goto free_rproc;
259         }
260
261         return 0;
262
263 free_rproc:
264         rproc_free(rproc);
265
266         return ret;
267 }
268
269 static int da8xx_rproc_remove(struct platform_device *pdev)
270 {
271         struct device *dev = &pdev->dev;
272         struct rproc *rproc = platform_get_drvdata(pdev);
273         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
274
275         /*
276          * It's important to place the DSP in reset before going away,
277          * since a subsequent insmod of this module may enable the DSP's
278          * clock before its program/boot-address has been loaded and
279          * before this module's probe has had a chance to reset the DSP.
280          * Without the reset, the DSP can lockup permanently when it
281          * begins executing garbage.
282          */
283         reset_assert(dev);
284
285         /*
286          * The devm subsystem might end up releasing things before
287          * freeing the irq, thus allowing an interrupt to sneak in while
288          * the device is being removed.  This should prevent that.
289          */
290         disable_irq(drproc->irq);
291
292         rproc_del(rproc);
293         rproc_free(rproc);
294
295         return 0;
296 }
297
298 static struct platform_driver da8xx_rproc_driver = {
299         .probe = da8xx_rproc_probe,
300         .remove = da8xx_rproc_remove,
301         .driver = {
302                 .name = "davinci-rproc",
303         },
304 };
305
306 module_platform_driver(da8xx_rproc_driver);
307
308 MODULE_LICENSE("GPL v2");
309 MODULE_DESCRIPTION("DA8XX Remote Processor control driver");