drivers/scsi/g_NCR5380.c

   1 /*
   2  * Generic Generic NCR5380 driver
   3  *
   4  * Copyright 1993, Drew Eckhardt
   5  *      Visionary Computing
   6  *      (Unix and Linux consulting and custom programming)
   7  *      drew@colorado.edu
   8  *      +1 (303) 440-4894
   9  *
  10  * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
  11  *    K.Lentin@cs.monash.edu.au
  12  *
  13  * NCR53C400A extensions (c) 1996, Ingmar Baumgart
  14  *    ingmar@gonzo.schwaben.de
  15  *
  16  * DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
  17  * ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
  18  *
  19  * Added ISAPNP support for DTC436 adapters,
  20  * Thomas Sailer, sailer@ife.ee.ethz.ch
  21  *
  22  * See Documentation/scsi/g_NCR5380.txt for more info.
  23  */
  24
  25 #include <asm/io.h>
  26 #include <linux/blkdev.h>
  27 #include <linux/module.h>
  28 #include <scsi/scsi_host.h>
  29 #include "g_NCR5380.h"
  30 #include "NCR5380.h"
  31 #include <linux/init.h>
  32 #include <linux/ioport.h>
  33 #include <linux/isapnp.h>
  34 #include <linux/interrupt.h>
  35
  36 static int ncr_irq;
  37 static int ncr_dma;
  38 static int ncr_addr;
  39 static int ncr_5380;
  40 static int ncr_53c400;
  41 static int ncr_53c400a;
  42 static int dtc_3181e;
  43 static int hp_c2502;
  44
  45 static struct override {
  46         NCR5380_map_type NCR5380_map_name;
  47         int irq;
  48         int dma;
  49         int board;              /* Use NCR53c400, Ricoh, etc. extensions ? */
  50 } overrides
  51 #ifdef GENERIC_NCR5380_OVERRIDE
  52 [] __initdata = GENERIC_NCR5380_OVERRIDE;
  53 #else
  54 [1] __initdata = { { 0,},};
  55 #endif
  56
  57 #define NO_OVERRIDES ARRAY_SIZE(overrides)
  58
  59 #ifndef MODULE
  60
  61 /**
  62  *      internal_setup          -       handle lilo command string override
  63  *      @board: BOARD_* identifier for the board
  64  *      @str: unused
  65  *      @ints: numeric parameters
  66  *
  67  *      Do LILO command line initialization of the overrides array. Display
  68  *      errors when needed
  69  *
  70  *      Locks: none
  71  */
  72
  73 static void __init internal_setup(int board, char *str, int *ints)
  74 {
  75         static int commandline_current;
  76         switch (board) {
  77         case BOARD_NCR5380:
  78                 if (ints[0] != 2 && ints[0] != 3) {
  79                         printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
  80                         return;
  81                 }
  82                 break;
  83         case BOARD_NCR53C400:
  84                 if (ints[0] != 2) {
  85                         printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
  86                         return;
  87                 }
  88                 break;
  89         case BOARD_NCR53C400A:
  90                 if (ints[0] != 2) {
  91                         printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n");
  92                         return;
  93                 }
  94                 break;
  95         case BOARD_DTC3181E:
  96                 if (ints[0] != 2) {
  97                         printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n");
  98                         return;
  99                 }
 100                 break;
 101         }
 102
 103         if (commandline_current < NO_OVERRIDES) {
 104                 overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
 105                 overrides[commandline_current].irq = ints[2];
 106                 if (ints[0] == 3)
 107                         overrides[commandline_current].dma = ints[3];
 108                 else
 109                         overrides[commandline_current].dma = DMA_NONE;
 110                 overrides[commandline_current].board = board;
 111                 ++commandline_current;
 112         }
 113 }
 114
 115
 116 /**
 117  *      do_NCR53C80_setup               -       set up entry point
 118  *      @str: unused
 119  *
 120  *      Setup function invoked at boot to parse the ncr5380= command
 121  *      line.
 122  */
 123
 124 static int __init do_NCR5380_setup(char *str)
 125 {
 126         int ints[10];
 127
 128         get_options(str, ARRAY_SIZE(ints), ints);
 129         internal_setup(BOARD_NCR5380, str, ints);
 130         return 1;
 131 }
 132
 133 /**
 134  *      do_NCR53C400_setup              -       set up entry point
 135  *      @str: unused
 136  *      @ints: integer parameters from kernel setup code
 137  *
 138  *      Setup function invoked at boot to parse the ncr53c400= command
 139  *      line.
 140  */
 141
 142 static int __init do_NCR53C400_setup(char *str)
 143 {
 144         int ints[10];
 145
 146         get_options(str, ARRAY_SIZE(ints), ints);
 147         internal_setup(BOARD_NCR53C400, str, ints);
 148         return 1;
 149 }
 150
 151 /**
 152  *      do_NCR53C400A_setup     -       set up entry point
 153  *      @str: unused
 154  *      @ints: integer parameters from kernel setup code
 155  *
 156  *      Setup function invoked at boot to parse the ncr53c400a= command
 157  *      line.
 158  */
 159
 160 static int __init do_NCR53C400A_setup(char *str)
 161 {
 162         int ints[10];
 163
 164         get_options(str, ARRAY_SIZE(ints), ints);
 165         internal_setup(BOARD_NCR53C400A, str, ints);
 166         return 1;
 167 }
 168
 169 /**
 170  *      do_DTC3181E_setup       -       set up entry point
 171  *      @str: unused
 172  *      @ints: integer parameters from kernel setup code
 173  *
 174  *      Setup function invoked at boot to parse the dtc3181e= command
 175  *      line.
 176  */
 177
 178 static int __init do_DTC3181E_setup(char *str)
 179 {
 180         int ints[10];
 181
 182         get_options(str, ARRAY_SIZE(ints), ints);
 183         internal_setup(BOARD_DTC3181E, str, ints);
 184         return 1;
 185 }
 186
 187 #endif
 188
 189 #ifndef SCSI_G_NCR5380_MEM
 190 /*
 191  * Configure I/O address of 53C400A or DTC436 by writing magic numbers
 192  * to ports 0x779 and 0x379.
 193  */
 194 static void magic_configure(int idx, u8 irq, u8 magic[])
 195 {
 196         u8 cfg = 0;
 197
 198         outb(magic[0], 0x779);
 199         outb(magic[1], 0x379);
 200         outb(magic[2], 0x379);
 201         outb(magic[3], 0x379);
 202         outb(magic[4], 0x379);
 203
 204         /* allowed IRQs for HP C2502 */
 205         if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
 206                 irq = 0;
 207         if (idx >= 0 && idx <= 7)
 208                 cfg = 0x80 | idx | (irq << 4);
 209         outb(cfg, 0x379);
 210 }
 211 #endif
 212
 213 /**
 214  *      generic_NCR5380_detect  -       look for NCR5380 controllers
 215  *      @tpnt: the scsi template
 216  *
 217  *      Scan for the present of NCR5380, NCR53C400, NCR53C400A, DTC3181E
 218  *      and DTC436(ISAPnP) controllers. If overrides have been set we use
 219  *      them.
 220  *
 221  *      Locks: none
 222  */
 223
 224 static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 225 {
 226         static int current_override;
 227         int count;
 228         unsigned int *ports;
 229         u8 *magic = NULL;
 230 #ifndef SCSI_G_NCR5380_MEM
 231         int i;
 232         int port_idx = -1;
 233         unsigned long region_size;
 234 #endif
 235         static unsigned int __initdata ncr_53c400a_ports[] = {
 236                 0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
 237         };
 238         static unsigned int __initdata dtc_3181e_ports[] = {
 239                 0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
 240         };
 241         static u8 ncr_53c400a_magic[] __initdata = {    /* 53C400A & DTC436 */
 242                 0x59, 0xb9, 0xc5, 0xae, 0xa6
 243         };
 244         static u8 hp_c2502_magic[] __initdata = {       /* HP C2502 */
 245                 0x0f, 0x22, 0xf0, 0x20, 0x80
 246         };
 247         int flags;
 248         struct Scsi_Host *instance;
 249         struct NCR5380_hostdata *hostdata;
 250 #ifdef SCSI_G_NCR5380_MEM
 251         unsigned long base;
 252         void __iomem *iomem;
 253         resource_size_t iomem_size;
 254 #endif
 255
 256         if (ncr_irq)
 257                 overrides[0].irq = ncr_irq;
 258         if (ncr_dma)
 259                 overrides[0].dma = ncr_dma;
 260         if (ncr_addr)
 261                 overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
 262         if (ncr_5380)
 263                 overrides[0].board = BOARD_NCR5380;
 264         else if (ncr_53c400)
 265                 overrides[0].board = BOARD_NCR53C400;
 266         else if (ncr_53c400a)
 267                 overrides[0].board = BOARD_NCR53C400A;
 268         else if (dtc_3181e)
 269                 overrides[0].board = BOARD_DTC3181E;
 270         else if (hp_c2502)
 271                 overrides[0].board = BOARD_HP_C2502;
 272 #ifndef SCSI_G_NCR5380_MEM
 273         if (!current_override && isapnp_present()) {
 274                 struct pnp_dev *dev = NULL;
 275                 count = 0;
 276                 while ((dev = pnp_find_dev(NULL, ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e), dev))) {
 277                         if (count >= NO_OVERRIDES)
 278                                 break;
 279                         if (pnp_device_attach(dev) < 0)
 280                                 continue;
 281                         if (pnp_activate_dev(dev) < 0) {
 282                                 printk(KERN_ERR "dtc436e probe: activate failed\n");
 283                                 pnp_device_detach(dev);
 284                                 continue;
 285                         }
 286                         if (!pnp_port_valid(dev, 0)) {
 287                                 printk(KERN_ERR "dtc436e probe: no valid port\n");
 288                                 pnp_device_detach(dev);
 289                                 continue;
 290                         }
 291                         if (pnp_irq_valid(dev, 0))
 292                                 overrides[count].irq = pnp_irq(dev, 0);
 293                         else
 294                                 overrides[count].irq = NO_IRQ;
 295                         if (pnp_dma_valid(dev, 0))
 296                                 overrides[count].dma = pnp_dma(dev, 0);
 297                         else
 298                                 overrides[count].dma = DMA_NONE;
 299                         overrides[count].NCR5380_map_name = (NCR5380_map_type) pnp_port_start(dev, 0);
 300                         overrides[count].board = BOARD_DTC3181E;
 301                         count++;
 302                 }
 303         }
 304 #endif
 305
 306         for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
 307                 if (!(overrides[current_override].NCR5380_map_name))
 308                         continue;
 309
 310                 ports = NULL;
 311                 flags = 0;
 312                 switch (overrides[current_override].board) {
 313                 case BOARD_NCR5380:
 314                         flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
 315                         break;
 316                 case BOARD_NCR53C400A:
 317                         ports = ncr_53c400a_ports;
 318                         magic = ncr_53c400a_magic;
 319                         break;
 320                 case BOARD_HP_C2502:
 321                         ports = ncr_53c400a_ports;
 322                         magic = hp_c2502_magic;
 323                         break;
 324                 case BOARD_DTC3181E:
 325                         ports = dtc_3181e_ports;
 326                         magic = ncr_53c400a_magic;
 327                         break;
 328                 }
 329
 330 #ifndef SCSI_G_NCR5380_MEM
 331                 if (ports && magic) {
 332                         /* wakeup sequence for the NCR53C400A and DTC3181E */
 333
 334                         /* Disable the adapter and look for a free io port */
 335                         magic_configure(-1, 0, magic);
 336
 337                         region_size = 16;
 338
 339                         if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
 340                                 for (i = 0; ports[i]; i++) {
 341                                         if (!request_region(ports[i], region_size, "ncr53c80"))
 342                                                 continue;
 343                                         if (overrides[current_override].NCR5380_map_name == ports[i])
 344                                                 break;
 345                                         release_region(ports[i], region_size);
 346                         } else
 347                                 for (i = 0; ports[i]; i++) {
 348                                         if (!request_region(ports[i], region_size, "ncr53c80"))
 349                                                 continue;
 350                                         if (inb(ports[i]) == 0xff)
 351                                                 break;
 352                                         release_region(ports[i], region_size);
 353                                 }
 354                         if (ports[i]) {
 355                                 /* At this point we have our region reserved */
 356                                 magic_configure(i, 0, magic); /* no IRQ yet */
 357                                 outb(0xc0, ports[i] + 9);
 358                                 if (inb(ports[i] + 9) != 0x80)
 359                                         continue;
 360                                 overrides[current_override].NCR5380_map_name = ports[i];
 361                                 port_idx = i;
 362                         } else
 363                                 continue;
 364                 }
 365                 else
 366                 {
 367                         /* Not a 53C400A style setup - just grab */
 368                         region_size = 8;
 369                         if (!request_region(overrides[current_override].NCR5380_map_name,
 370                                             region_size, "ncr5380"))
 371                                 continue;
 372                 }
 373 #else
 374                 base = overrides[current_override].NCR5380_map_name;
 375                 iomem_size = NCR53C400_region_size;
 376                 if (!request_mem_region(base, iomem_size, "ncr5380"))
 377                         continue;
 378                 iomem = ioremap(base, iomem_size);
 379                 if (!iomem) {
 380                         release_mem_region(base, iomem_size);
 381                         continue;
 382                 }
 383 #endif
 384                 instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
 385                 if (instance == NULL)
 386                         goto out_release;
 387                 hostdata = shost_priv(instance);
 388
 389 #ifndef SCSI_G_NCR5380_MEM
 390                 instance->io_port = overrides[current_override].NCR5380_map_name;
 391                 instance->n_io_port = region_size;
 392                 hostdata->io_width = 1; /* 8-bit PDMA by default */
 393
 394                 /*
 395                  * On NCR53C400 boards, NCR5380 registers are mapped 8 past
 396                  * the base address.
 397                  */
 398                 switch (overrides[current_override].board) {
 399                 case BOARD_NCR53C400:
 400                         instance->io_port += 8;
 401                         hostdata->c400_ctl_status = 0;
 402                         hostdata->c400_blk_cnt = 1;
 403                         hostdata->c400_host_buf = 4;
 404                         break;
 405                 case BOARD_DTC3181E:
 406                         hostdata->io_width = 2; /* 16-bit PDMA */
 407                         /* fall through */
 408                 case BOARD_NCR53C400A:
 409                 case BOARD_HP_C2502:
 410                         hostdata->c400_ctl_status = 9;
 411                         hostdata->c400_blk_cnt = 10;
 412                         hostdata->c400_host_buf = 8;
 413                         break;
 414                 }
 415 #else
 416                 instance->base = overrides[current_override].NCR5380_map_name;
 417                 hostdata->iomem = iomem;
 418                 hostdata->iomem_size = iomem_size;
 419                 switch (overrides[current_override].board) {
 420                 case BOARD_NCR53C400:
 421                         hostdata->c400_ctl_status = 0x100;
 422                         hostdata->c400_blk_cnt = 0x101;
 423                         hostdata->c400_host_buf = 0x104;
 424                         break;
 425                 case BOARD_DTC3181E:
 426                 case BOARD_NCR53C400A:
 427                 case BOARD_HP_C2502:
 428                         pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
 429                         goto out_unregister;
 430                 }
 431 #endif
 432
 433                 if (NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP))
 434                         goto out_unregister;
 435
 436                 switch (overrides[current_override].board) {
 437                 case BOARD_NCR53C400:
 438                 case BOARD_DTC3181E:
 439                 case BOARD_NCR53C400A:
 440                 case BOARD_HP_C2502:
 441                         NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
 442                 }
 443
 444                 NCR5380_maybe_reset_bus(instance);
 445
 446                 if (overrides[current_override].irq != IRQ_AUTO)
 447                         instance->irq = overrides[current_override].irq;
 448                 else
 449                         instance->irq = NCR5380_probe_irq(instance, 0xffff);
 450
 451                 /* Compatibility with documented NCR5380 kernel parameters */
 452                 if (instance->irq == 255)
 453                         instance->irq = NO_IRQ;
 454
 455                 if (instance->irq != NO_IRQ) {
 456 #ifndef SCSI_G_NCR5380_MEM
 457                         /* set IRQ for HP C2502 */
 458                         if (overrides[current_override].board == BOARD_HP_C2502)
 459                                 magic_configure(port_idx, instance->irq, magic);
 460 #endif
 461                         if (request_irq(instance->irq, generic_NCR5380_intr,
 462                                         0, "NCR5380", instance)) {
 463                                 printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
 464                                 instance->irq = NO_IRQ;
 465                         }
 466                 }
 467
 468                 if (instance->irq == NO_IRQ) {
 469                         printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
 470                         printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
 471                 }
 472
 473                 ++current_override;
 474                 ++count;
 475         }
 476         return count;
 477
 478 out_unregister:
 479         scsi_unregister(instance);
 480 out_release:
 481 #ifndef SCSI_G_NCR5380_MEM
 482         release_region(overrides[current_override].NCR5380_map_name, region_size);
 483 #else
 484         iounmap(iomem);
 485         release_mem_region(base, iomem_size);
 486 #endif
 487         return count;
 488 }
 489
 490 /**
 491  *      generic_NCR5380_release_resources       -       free resources
 492  *      @instance: host adapter to clean up
 493  *
 494  *      Free the generic interface resources from this adapter.
 495  *
 496  *      Locks: none
 497  */
 498
 499 static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
 500 {
 501         if (instance->irq != NO_IRQ)
 502                 free_irq(instance->irq, instance);
 503         NCR5380_exit(instance);
 504 #ifndef SCSI_G_NCR5380_MEM
 505         release_region(instance->io_port, instance->n_io_port);
 506 #else
 507         {
 508                 struct NCR5380_hostdata *hostdata = shost_priv(instance);
 509
 510                 iounmap(hostdata->iomem);
 511                 release_mem_region(instance->base, hostdata->iomem_size);
 512         }
 513 #endif
 514         return 0;
 515 }
 516
 517 /**
 518  *      generic_NCR5380_pread - pseudo DMA read
 519  *      @instance: adapter to read from
 520  *      @dst: buffer to read into
 521  *      @len: buffer length
 522  *
 523  *      Perform a pseudo DMA mode read from an NCR53C400 or equivalent
 524  *      controller
 525  */
 526
 527 static inline int generic_NCR5380_pread(struct Scsi_Host *instance,
 528                                         unsigned char *dst, int len)
 529 {
 530         struct NCR5380_hostdata *hostdata = shost_priv(instance);
 531         int blocks = len / 128;
 532         int start = 0;
 533
 534         NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
 535         NCR5380_write(hostdata->c400_blk_cnt, blocks);
 536         while (1) {
 537                 if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
 538                         break;
 539                 if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
 540                         printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
 541                         return -1;
 542                 }
 543                 while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
 544                         ; /* FIXME - no timeout */
 545
 546 #ifndef SCSI_G_NCR5380_MEM
 547                 if (hostdata->io_width == 2)
 548                         insw(instance->io_port + hostdata->c400_host_buf,
 549                                                         dst + start, 64);
 550                 else
 551                         insb(instance->io_port + hostdata->c400_host_buf,
 552                                                         dst + start, 128);
 553 #else
 554                 /* implies SCSI_G_NCR5380_MEM */
 555                 memcpy_fromio(dst + start,
 556                               hostdata->iomem + NCR53C400_host_buffer, 128);
 557 #endif
 558                 start += 128;
 559                 blocks--;
 560         }
 561
 562         if (blocks) {
 563                 while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
 564                         ; /* FIXME - no timeout */
 565
 566 #ifndef SCSI_G_NCR5380_MEM
 567                 if (hostdata->io_width == 2)
 568                         insw(instance->io_port + hostdata->c400_host_buf,
 569                                                         dst + start, 64);
 570                 else
 571                         insb(instance->io_port + hostdata->c400_host_buf,
 572                                                         dst + start, 128);
 573 #else
 574                 /* implies SCSI_G_NCR5380_MEM */
 575                 memcpy_fromio(dst + start,
 576                               hostdata->iomem + NCR53C400_host_buffer, 128);
 577 #endif
 578                 start += 128;
 579                 blocks--;
 580         }
 581
 582         if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
 583                 printk("53C400r: no 53C80 gated irq after transfer");
 584
 585         /* wait for 53C80 registers to be available */
 586         while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
 587                 ;
 588
 589         if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
 590                 printk(KERN_ERR "53C400r: no end dma signal\n");
 591
 592         return 0;
 593 }
 594
 595 /**
 596  *      generic_NCR5380_pwrite - pseudo DMA write
 597  *      @instance: adapter to read from
 598  *      @dst: buffer to read into
 599  *      @len: buffer length
 600  *
 601  *      Perform a pseudo DMA mode read from an NCR53C400 or equivalent
 602  *      controller
 603  */
 604
 605 static inline int generic_NCR5380_pwrite(struct Scsi_Host *instance,
 606                                          unsigned char *src, int len)
 607 {
 608         struct NCR5380_hostdata *hostdata = shost_priv(instance);
 609         int blocks = len / 128;
 610         int start = 0;
 611
 612         NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
 613         NCR5380_write(hostdata->c400_blk_cnt, blocks);
 614         while (1) {
 615                 if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
 616                         printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
 617                         return -1;
 618                 }
 619
 620                 if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
 621                         break;
 622                 while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
 623                         ; // FIXME - timeout
 624 #ifndef SCSI_G_NCR5380_MEM
 625                 if (hostdata->io_width == 2)
 626                         outsw(instance->io_port + hostdata->c400_host_buf,
 627                                                         src + start, 64);
 628                 else
 629                         outsb(instance->io_port + hostdata->c400_host_buf,
 630                                                         src + start, 128);
 631 #else
 632                 /* implies SCSI_G_NCR5380_MEM */
 633                 memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
 634                             src + start, 128);
 635 #endif
 636                 start += 128;
 637                 blocks--;
 638         }
 639         if (blocks) {
 640                 while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
 641                         ; // FIXME - no timeout
 642
 643 #ifndef SCSI_G_NCR5380_MEM
 644                 if (hostdata->io_width == 2)
 645                         outsw(instance->io_port + hostdata->c400_host_buf,
 646                                                         src + start, 64);
 647                 else
 648                         outsb(instance->io_port + hostdata->c400_host_buf,
 649                                                         src + start, 128);
 650 #else
 651                 /* implies SCSI_G_NCR5380_MEM */
 652                 memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
 653                             src + start, 128);
 654 #endif
 655                 start += 128;
 656                 blocks--;
 657         }
 658
 659         /* wait for 53C80 registers to be available */
 660         while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
 661                 udelay(4); /* DTC436 chip hangs without this */
 662                 /* FIXME - no timeout */
 663         }
 664
 665         if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
 666                 printk(KERN_ERR "53C400w: no end dma signal\n");
 667         }
 668
 669         while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
 670                 ;       // TIMEOUT
 671         return 0;
 672 }
 673
 674 static int generic_NCR5380_dma_xfer_len(struct Scsi_Host *instance,
 675                                         struct scsi_cmnd *cmd)
 676 {
 677         struct NCR5380_hostdata *hostdata = shost_priv(instance);
 678         int transfersize = cmd->transfersize;
 679
 680         if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
 681                 return 0;
 682
 683         /* Limit transfers to 32K, for xx400 & xx406
 684          * pseudoDMA that transfers in 128 bytes blocks.
 685          */
 686         if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
 687             !(cmd->SCp.this_residual % transfersize))
 688                 transfersize = 32 * 1024;
 689
 690         /* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
 691         if (transfersize % 128)
 692                 transfersize = 0;
 693
 694         return transfersize;
 695 }
 696
 697 /*
 698  *      Include the NCR5380 core code that we build our driver around
 699  */
 700
 701 #include "NCR5380.c"
 702
 703 static struct scsi_host_template driver_template = {
 704         .proc_name              = DRV_MODULE_NAME,
 705         .name                   = "Generic NCR5380/NCR53C400 SCSI",
 706         .detect                 = generic_NCR5380_detect,
 707         .release                = generic_NCR5380_release_resources,
 708         .info                   = generic_NCR5380_info,
 709         .queuecommand           = generic_NCR5380_queue_command,
 710         .eh_abort_handler       = generic_NCR5380_abort,
 711         .eh_bus_reset_handler   = generic_NCR5380_bus_reset,
 712         .can_queue              = 16,
 713         .this_id                = 7,
 714         .sg_tablesize           = SG_ALL,
 715         .cmd_per_lun            = 2,
 716         .use_clustering         = DISABLE_CLUSTERING,
 717         .cmd_size               = NCR5380_CMD_SIZE,
 718         .max_sectors            = 128,
 719 };
 720
 721 #include "scsi_module.c"
 722
 723 module_param(ncr_irq, int, 0);
 724 module_param(ncr_dma, int, 0);
 725 module_param(ncr_addr, int, 0);
 726 module_param(ncr_5380, int, 0);
 727 module_param(ncr_53c400, int, 0);
 728 module_param(ncr_53c400a, int, 0);
 729 module_param(dtc_3181e, int, 0);
 730 module_param(hp_c2502, int, 0);
 731 MODULE_LICENSE("GPL");
 732
 733 #if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)
 734 static struct isapnp_device_id id_table[] = {
 735         {
 736          ISAPNP_ANY_ID, ISAPNP_ANY_ID,
 737          ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e),
 738          0},
 739         {0}
 740 };
 741
 742 MODULE_DEVICE_TABLE(isapnp, id_table);
 743 #endif
 744
 745 __setup("ncr5380=", do_NCR5380_setup);
 746 __setup("ncr53c400=", do_NCR53C400_setup);
 747 __setup("ncr53c400a=", do_NCR53C400A_setup);
 748 __setup("dtc3181e=", do_DTC3181E_setup);