drivers/tty/serial/pch_uart.c

   1 /*
   2  *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
   3  *
   4  *This program is free software; you can redistribute it and/or modify
   5  *it under the terms of the GNU General Public License as published by
   6  *the Free Software Foundation; version 2 of the License.
   7  *
   8  *This program is distributed in the hope that it will be useful,
   9  *but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  *GNU General Public License for more details.
  12  *
  13  *You should have received a copy of the GNU General Public License
  14  *along with this program; if not, write to the Free Software
  15  *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  16  */
  17 #if defined(CONFIG_SERIAL_PCH_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  18 #define SUPPORT_SYSRQ
  19 #endif
  20 #include <linux/kernel.h>
  21 #include <linux/serial_reg.h>
  22 #include <linux/slab.h>
  23 #include <linux/module.h>
  24 #include <linux/pci.h>
  25 #include <linux/console.h>
  26 #include <linux/serial_core.h>
  27 #include <linux/tty.h>
  28 #include <linux/tty_flip.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/io.h>
  31 #include <linux/dmi.h>
  32 #include <linux/nmi.h>
  33 #include <linux/delay.h>
  34 #include <linux/of.h>
  35
  36 #include <linux/debugfs.h>
  37 #include <linux/dmaengine.h>
  38 #include <linux/pch_dma.h>
  39
  40 enum {
  41         PCH_UART_HANDLED_RX_INT_SHIFT,
  42         PCH_UART_HANDLED_TX_INT_SHIFT,
  43         PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
  44         PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
  45         PCH_UART_HANDLED_MS_INT_SHIFT,
  46         PCH_UART_HANDLED_LS_INT_SHIFT,
  47 };
  48
  49 enum {
  50         PCH_UART_8LINE,
  51         PCH_UART_2LINE,
  52 };
  53
  54 #define PCH_UART_DRIVER_DEVICE "ttyPCH"
  55
  56 /* Set the max number of UART port
  57  * Intel EG20T PCH: 4 port
  58  * LAPIS Semiconductor ML7213 IOH: 3 port
  59  * LAPIS Semiconductor ML7223 IOH: 2 port
  60 */
  61 #define PCH_UART_NR     4
  62
  63 #define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
  64 #define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
  65 #define PCH_UART_HANDLED_RX_ERR_INT     (1<<((\
  66                                         PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
  67 #define PCH_UART_HANDLED_RX_TRG_INT     (1<<((\
  68                                         PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
  69 #define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
  70
  71 #define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
  72
  73 #define PCH_UART_RBR            0x00
  74 #define PCH_UART_THR            0x00
  75
  76 #define PCH_UART_IER_MASK       (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
  77                                 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
  78 #define PCH_UART_IER_ERBFI      0x00000001
  79 #define PCH_UART_IER_ETBEI      0x00000002
  80 #define PCH_UART_IER_ELSI       0x00000004
  81 #define PCH_UART_IER_EDSSI      0x00000008
  82
  83 #define PCH_UART_IIR_IP                 0x00000001
  84 #define PCH_UART_IIR_IID                0x00000006
  85 #define PCH_UART_IIR_MSI                0x00000000
  86 #define PCH_UART_IIR_TRI                0x00000002
  87 #define PCH_UART_IIR_RRI                0x00000004
  88 #define PCH_UART_IIR_REI                0x00000006
  89 #define PCH_UART_IIR_TOI                0x00000008
  90 #define PCH_UART_IIR_FIFO256            0x00000020
  91 #define PCH_UART_IIR_FIFO64             PCH_UART_IIR_FIFO256
  92 #define PCH_UART_IIR_FE                 0x000000C0
  93
  94 #define PCH_UART_FCR_FIFOE              0x00000001
  95 #define PCH_UART_FCR_RFR                0x00000002
  96 #define PCH_UART_FCR_TFR                0x00000004
  97 #define PCH_UART_FCR_DMS                0x00000008
  98 #define PCH_UART_FCR_FIFO256            0x00000020
  99 #define PCH_UART_FCR_RFTL               0x000000C0
 100
 101 #define PCH_UART_FCR_RFTL1              0x00000000
 102 #define PCH_UART_FCR_RFTL64             0x00000040
 103 #define PCH_UART_FCR_RFTL128            0x00000080
 104 #define PCH_UART_FCR_RFTL224            0x000000C0
 105 #define PCH_UART_FCR_RFTL16             PCH_UART_FCR_RFTL64
 106 #define PCH_UART_FCR_RFTL32             PCH_UART_FCR_RFTL128
 107 #define PCH_UART_FCR_RFTL56             PCH_UART_FCR_RFTL224
 108 #define PCH_UART_FCR_RFTL4              PCH_UART_FCR_RFTL64
 109 #define PCH_UART_FCR_RFTL8              PCH_UART_FCR_RFTL128
 110 #define PCH_UART_FCR_RFTL14             PCH_UART_FCR_RFTL224
 111 #define PCH_UART_FCR_RFTL_SHIFT         6
 112
 113 #define PCH_UART_LCR_WLS        0x00000003
 114 #define PCH_UART_LCR_STB        0x00000004
 115 #define PCH_UART_LCR_PEN        0x00000008
 116 #define PCH_UART_LCR_EPS        0x00000010
 117 #define PCH_UART_LCR_SP         0x00000020
 118 #define PCH_UART_LCR_SB         0x00000040
 119 #define PCH_UART_LCR_DLAB       0x00000080
 120 #define PCH_UART_LCR_NP         0x00000000
 121 #define PCH_UART_LCR_OP         PCH_UART_LCR_PEN
 122 #define PCH_UART_LCR_EP         (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
 123 #define PCH_UART_LCR_1P         (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
 124 #define PCH_UART_LCR_0P         (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
 125                                 PCH_UART_LCR_SP)
 126
 127 #define PCH_UART_LCR_5BIT       0x00000000
 128 #define PCH_UART_LCR_6BIT       0x00000001
 129 #define PCH_UART_LCR_7BIT       0x00000002
 130 #define PCH_UART_LCR_8BIT       0x00000003
 131
 132 #define PCH_UART_MCR_DTR        0x00000001
 133 #define PCH_UART_MCR_RTS        0x00000002
 134 #define PCH_UART_MCR_OUT        0x0000000C
 135 #define PCH_UART_MCR_LOOP       0x00000010
 136 #define PCH_UART_MCR_AFE        0x00000020
 137
 138 #define PCH_UART_LSR_DR         0x00000001
 139 #define PCH_UART_LSR_ERR        (1<<7)
 140
 141 #define PCH_UART_MSR_DCTS       0x00000001
 142 #define PCH_UART_MSR_DDSR       0x00000002
 143 #define PCH_UART_MSR_TERI       0x00000004
 144 #define PCH_UART_MSR_DDCD       0x00000008
 145 #define PCH_UART_MSR_CTS        0x00000010
 146 #define PCH_UART_MSR_DSR        0x00000020
 147 #define PCH_UART_MSR_RI         0x00000040
 148 #define PCH_UART_MSR_DCD        0x00000080
 149 #define PCH_UART_MSR_DELTA      (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
 150                                 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
 151
 152 #define PCH_UART_DLL            0x00
 153 #define PCH_UART_DLM            0x01
 154
 155 #define PCH_UART_BRCSR          0x0E
 156
 157 #define PCH_UART_IID_RLS        (PCH_UART_IIR_REI)
 158 #define PCH_UART_IID_RDR        (PCH_UART_IIR_RRI)
 159 #define PCH_UART_IID_RDR_TO     (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
 160 #define PCH_UART_IID_THRE       (PCH_UART_IIR_TRI)
 161 #define PCH_UART_IID_MS         (PCH_UART_IIR_MSI)
 162
 163 #define PCH_UART_HAL_PARITY_NONE        (PCH_UART_LCR_NP)
 164 #define PCH_UART_HAL_PARITY_ODD         (PCH_UART_LCR_OP)
 165 #define PCH_UART_HAL_PARITY_EVEN        (PCH_UART_LCR_EP)
 166 #define PCH_UART_HAL_PARITY_FIX1        (PCH_UART_LCR_1P)
 167 #define PCH_UART_HAL_PARITY_FIX0        (PCH_UART_LCR_0P)
 168 #define PCH_UART_HAL_5BIT               (PCH_UART_LCR_5BIT)
 169 #define PCH_UART_HAL_6BIT               (PCH_UART_LCR_6BIT)
 170 #define PCH_UART_HAL_7BIT               (PCH_UART_LCR_7BIT)
 171 #define PCH_UART_HAL_8BIT               (PCH_UART_LCR_8BIT)
 172 #define PCH_UART_HAL_STB1               0
 173 #define PCH_UART_HAL_STB2               (PCH_UART_LCR_STB)
 174
 175 #define PCH_UART_HAL_CLR_TX_FIFO        (PCH_UART_FCR_TFR)
 176 #define PCH_UART_HAL_CLR_RX_FIFO        (PCH_UART_FCR_RFR)
 177 #define PCH_UART_HAL_CLR_ALL_FIFO       (PCH_UART_HAL_CLR_TX_FIFO | \
 178                                         PCH_UART_HAL_CLR_RX_FIFO)
 179
 180 #define PCH_UART_HAL_DMA_MODE0          0
 181 #define PCH_UART_HAL_FIFO_DIS           0
 182 #define PCH_UART_HAL_FIFO16             (PCH_UART_FCR_FIFOE)
 183 #define PCH_UART_HAL_FIFO256            (PCH_UART_FCR_FIFOE | \
 184                                         PCH_UART_FCR_FIFO256)
 185 #define PCH_UART_HAL_FIFO64             (PCH_UART_HAL_FIFO256)
 186 #define PCH_UART_HAL_TRIGGER1           (PCH_UART_FCR_RFTL1)
 187 #define PCH_UART_HAL_TRIGGER64          (PCH_UART_FCR_RFTL64)
 188 #define PCH_UART_HAL_TRIGGER128         (PCH_UART_FCR_RFTL128)
 189 #define PCH_UART_HAL_TRIGGER224         (PCH_UART_FCR_RFTL224)
 190 #define PCH_UART_HAL_TRIGGER16          (PCH_UART_FCR_RFTL16)
 191 #define PCH_UART_HAL_TRIGGER32          (PCH_UART_FCR_RFTL32)
 192 #define PCH_UART_HAL_TRIGGER56          (PCH_UART_FCR_RFTL56)
 193 #define PCH_UART_HAL_TRIGGER4           (PCH_UART_FCR_RFTL4)
 194 #define PCH_UART_HAL_TRIGGER8           (PCH_UART_FCR_RFTL8)
 195 #define PCH_UART_HAL_TRIGGER14          (PCH_UART_FCR_RFTL14)
 196 #define PCH_UART_HAL_TRIGGER_L          (PCH_UART_FCR_RFTL64)
 197 #define PCH_UART_HAL_TRIGGER_M          (PCH_UART_FCR_RFTL128)
 198 #define PCH_UART_HAL_TRIGGER_H          (PCH_UART_FCR_RFTL224)
 199
 200 #define PCH_UART_HAL_RX_INT             (PCH_UART_IER_ERBFI)
 201 #define PCH_UART_HAL_TX_INT             (PCH_UART_IER_ETBEI)
 202 #define PCH_UART_HAL_RX_ERR_INT         (PCH_UART_IER_ELSI)
 203 #define PCH_UART_HAL_MS_INT             (PCH_UART_IER_EDSSI)
 204 #define PCH_UART_HAL_ALL_INT            (PCH_UART_IER_MASK)
 205
 206 #define PCH_UART_HAL_DTR                (PCH_UART_MCR_DTR)
 207 #define PCH_UART_HAL_RTS                (PCH_UART_MCR_RTS)
 208 #define PCH_UART_HAL_OUT                (PCH_UART_MCR_OUT)
 209 #define PCH_UART_HAL_LOOP               (PCH_UART_MCR_LOOP)
 210 #define PCH_UART_HAL_AFE                (PCH_UART_MCR_AFE)
 211
 212 #define PCI_VENDOR_ID_ROHM              0x10DB
 213
 214 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 215
 216 #define DEFAULT_UARTCLK   1843200 /*   1.8432 MHz */
 217 #define CMITC_UARTCLK   192000000 /* 192.0000 MHz */
 218 #define FRI2_64_UARTCLK  64000000 /*  64.0000 MHz */
 219 #define FRI2_48_UARTCLK  48000000 /*  48.0000 MHz */
 220 #define NTC1_UARTCLK     64000000 /*  64.0000 MHz */
 221 #define MINNOW_UARTCLK   50000000 /*  50.0000 MHz */
 222
 223 struct pch_uart_buffer {
 224         unsigned char *buf;
 225         int size;
 226 };
 227
 228 struct eg20t_port {
 229         struct uart_port port;
 230         int port_type;
 231         void __iomem *membase;
 232         resource_size_t mapbase;
 233         unsigned int iobase;
 234         struct pci_dev *pdev;
 235         int fifo_size;
 236         unsigned int uartclk;
 237         int start_tx;
 238         int start_rx;
 239         int tx_empty;
 240         int trigger;
 241         int trigger_level;
 242         struct pch_uart_buffer rxbuf;
 243         unsigned int dmsr;
 244         unsigned int fcr;
 245         unsigned int mcr;
 246         unsigned int use_dma;
 247         struct dma_async_tx_descriptor  *desc_tx;
 248         struct dma_async_tx_descriptor  *desc_rx;
 249         struct pch_dma_slave            param_tx;
 250         struct pch_dma_slave            param_rx;
 251         struct dma_chan                 *chan_tx;
 252         struct dma_chan                 *chan_rx;
 253         struct scatterlist              *sg_tx_p;
 254         int                             nent;
 255         struct scatterlist              sg_rx;
 256         int                             tx_dma_use;
 257         void                            *rx_buf_virt;
 258         dma_addr_t                      rx_buf_dma;
 259
 260         struct dentry   *debugfs;
 261 #define IRQ_NAME_SIZE 17
 262         char                            irq_name[IRQ_NAME_SIZE];
 263
 264         /* protect the eg20t_port private structure and io access to membase */
 265         spinlock_t lock;
 266 };
 267
 268 /**
 269  * struct pch_uart_driver_data - private data structure for UART-DMA
 270  * @port_type:                  The number of DMA channel
 271  * @line_no:                    UART port line number (0, 1, 2...)
 272  */
 273 struct pch_uart_driver_data {
 274         int port_type;
 275         int line_no;
 276 };
 277
 278 enum pch_uart_num_t {
 279         pch_et20t_uart0 = 0,
 280         pch_et20t_uart1,
 281         pch_et20t_uart2,
 282         pch_et20t_uart3,
 283         pch_ml7213_uart0,
 284         pch_ml7213_uart1,
 285         pch_ml7213_uart2,
 286         pch_ml7223_uart0,
 287         pch_ml7223_uart1,
 288         pch_ml7831_uart0,
 289         pch_ml7831_uart1,
 290 };
 291
 292 static struct pch_uart_driver_data drv_dat[] = {
 293         [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
 294         [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
 295         [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
 296         [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
 297         [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
 298         [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
 299         [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
 300         [pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
 301         [pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
 302         [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
 303         [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
 304 };
 305
 306 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
 307 static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
 308 #endif
 309 static unsigned int default_baud = 9600;
 310 static unsigned int user_uartclk = 0;
 311 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
 312 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
 313 static const int trigger_level_16[4] = { 1, 4, 8, 14 };
 314 static const int trigger_level_1[4] = { 1, 1, 1, 1 };
 315
 316 #ifdef CONFIG_DEBUG_FS
 317
 318 #define PCH_REGS_BUFSIZE        1024
 319
 320
 321 static ssize_t port_show_regs(struct file *file, char __user *user_buf,
 322                                 size_t count, loff_t *ppos)
 323 {
 324         struct eg20t_port *priv = file->private_data;
 325         char *buf;
 326         u32 len = 0;
 327         ssize_t ret;
 328         unsigned char lcr;
 329
 330         buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
 331         if (!buf)
 332                 return 0;
 333
 334         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 335                         "PCH EG20T port[%d] regs:\n", priv->port.line);
 336
 337         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 338                         "=================================\n");
 339         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 340                         "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
 341         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 342                         "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
 343         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 344                         "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
 345         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 346                         "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
 347         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 348                         "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
 349         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 350                         "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
 351         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 352                         "BRCSR: \t0x%02x\n",
 353                         ioread8(priv->membase + PCH_UART_BRCSR));
 354
 355         lcr = ioread8(priv->membase + UART_LCR);
 356         iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 357         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 358                         "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
 359         len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
 360                         "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
 361         iowrite8(lcr, priv->membase + UART_LCR);
 362
 363         if (len > PCH_REGS_BUFSIZE)
 364                 len = PCH_REGS_BUFSIZE;
 365
 366         ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
 367         kfree(buf);
 368         return ret;
 369 }
 370
 371 static const struct file_operations port_regs_ops = {
 372         .owner          = THIS_MODULE,
 373         .open           = simple_open,
 374         .read           = port_show_regs,
 375         .llseek         = default_llseek,
 376 };
 377 #endif  /* CONFIG_DEBUG_FS */
 378
 379 static struct dmi_system_id pch_uart_dmi_table[] = {
 380         {
 381                 .ident = "CM-iTC",
 382                 {
 383                         DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
 384                 },
 385                 (void *)CMITC_UARTCLK,
 386         },
 387         {
 388                 .ident = "FRI2",
 389                 {
 390                         DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
 391                 },
 392                 (void *)FRI2_64_UARTCLK,
 393         },
 394         {
 395                 .ident = "Fish River Island II",
 396                 {
 397                         DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
 398                 },
 399                 (void *)FRI2_48_UARTCLK,
 400         },
 401         {
 402                 .ident = "COMe-mTT",
 403                 {
 404                         DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
 405                 },
 406                 (void *)NTC1_UARTCLK,
 407         },
 408         {
 409                 .ident = "nanoETXexpress-TT",
 410                 {
 411                         DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
 412                 },
 413                 (void *)NTC1_UARTCLK,
 414         },
 415         {
 416                 .ident = "MinnowBoard",
 417                 {
 418                         DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
 419                 },
 420                 (void *)MINNOW_UARTCLK,
 421         },
 422         { }
 423 };
 424
 425 /* Return UART clock, checking for board specific clocks. */
 426 static unsigned int pch_uart_get_uartclk(void)
 427 {
 428         const struct dmi_system_id *d;
 429
 430         if (user_uartclk)
 431                 return user_uartclk;
 432
 433         d = dmi_first_match(pch_uart_dmi_table);
 434         if (d)
 435                 return (unsigned long)d->driver_data;
 436
 437         return DEFAULT_UARTCLK;
 438 }
 439
 440 static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
 441                                           unsigned int flag)
 442 {
 443         u8 ier = ioread8(priv->membase + UART_IER);
 444         ier |= flag & PCH_UART_IER_MASK;
 445         iowrite8(ier, priv->membase + UART_IER);
 446 }
 447
 448 static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
 449                                            unsigned int flag)
 450 {
 451         u8 ier = ioread8(priv->membase + UART_IER);
 452         ier &= ~(flag & PCH_UART_IER_MASK);
 453         iowrite8(ier, priv->membase + UART_IER);
 454 }
 455
 456 static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
 457                                  unsigned int parity, unsigned int bits,
 458                                  unsigned int stb)
 459 {
 460         unsigned int dll, dlm, lcr;
 461         int div;
 462
 463         div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
 464         if (div < 0 || USHRT_MAX <= div) {
 465                 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 466                 return -EINVAL;
 467         }
 468
 469         dll = (unsigned int)div & 0x00FFU;
 470         dlm = ((unsigned int)div >> 8) & 0x00FFU;
 471
 472         if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
 473                 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
 474                 return -EINVAL;
 475         }
 476
 477         if (bits & ~PCH_UART_LCR_WLS) {
 478                 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
 479                 return -EINVAL;
 480         }
 481
 482         if (stb & ~PCH_UART_LCR_STB) {
 483                 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
 484                 return -EINVAL;
 485         }
 486
 487         lcr = parity;
 488         lcr |= bits;
 489         lcr |= stb;
 490
 491         dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
 492                  __func__, baud, div, lcr, jiffies);
 493         iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 494         iowrite8(dll, priv->membase + PCH_UART_DLL);
 495         iowrite8(dlm, priv->membase + PCH_UART_DLM);
 496         iowrite8(lcr, priv->membase + UART_LCR);
 497
 498         return 0;
 499 }
 500
 501 static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
 502                                     unsigned int flag)
 503 {
 504         if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
 505                 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
 506                         __func__, flag);
 507                 return -EINVAL;
 508         }
 509
 510         iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
 511         iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
 512                  priv->membase + UART_FCR);
 513         iowrite8(priv->fcr, priv->membase + UART_FCR);
 514
 515         return 0;
 516 }
 517
 518 static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
 519                                  unsigned int dmamode,
 520                                  unsigned int fifo_size, unsigned int trigger)
 521 {
 522         u8 fcr;
 523
 524         if (dmamode & ~PCH_UART_FCR_DMS) {
 525                 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
 526                         __func__, dmamode);
 527                 return -EINVAL;
 528         }
 529
 530         if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
 531                 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
 532                         __func__, fifo_size);
 533                 return -EINVAL;
 534         }
 535
 536         if (trigger & ~PCH_UART_FCR_RFTL) {
 537                 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
 538                         __func__, trigger);
 539                 return -EINVAL;
 540         }
 541
 542         switch (priv->fifo_size) {
 543         case 256:
 544                 priv->trigger_level =
 545                     trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 546                 break;
 547         case 64:
 548                 priv->trigger_level =
 549                     trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 550                 break;
 551         case 16:
 552                 priv->trigger_level =
 553                     trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 554                 break;
 555         default:
 556                 priv->trigger_level =
 557                     trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 558                 break;
 559         }
 560         fcr =
 561             dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
 562         iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
 563         iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
 564                  priv->membase + UART_FCR);
 565         iowrite8(fcr, priv->membase + UART_FCR);
 566         priv->fcr = fcr;
 567
 568         return 0;
 569 }
 570
 571 static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
 572 {
 573         unsigned int msr = ioread8(priv->membase + UART_MSR);
 574         priv->dmsr = msr & PCH_UART_MSR_DELTA;
 575         return (u8)msr;
 576 }
 577
 578 static void pch_uart_hal_write(struct eg20t_port *priv,
 579                               const unsigned char *buf, int tx_size)
 580 {
 581         int i;
 582         unsigned int thr;
 583
 584         for (i = 0; i < tx_size;) {
 585                 thr = buf[i++];
 586                 iowrite8(thr, priv->membase + PCH_UART_THR);
 587         }
 588 }
 589
 590 static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
 591                              int rx_size)
 592 {
 593         int i;
 594         u8 rbr, lsr;
 595         struct uart_port *port = &priv->port;
 596
 597         lsr = ioread8(priv->membase + UART_LSR);
 598         for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
 599              i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
 600              lsr = ioread8(priv->membase + UART_LSR)) {
 601                 rbr = ioread8(priv->membase + PCH_UART_RBR);
 602
 603                 if (lsr & UART_LSR_BI) {
 604                         port->icount.brk++;
 605                         if (uart_handle_break(port))
 606                                 continue;
 607                 }
 608 #ifdef SUPPORT_SYSRQ
 609                 if (port->sysrq) {
 610                         if (uart_handle_sysrq_char(port, rbr))
 611                                 continue;
 612                 }
 613 #endif
 614
 615                 buf[i++] = rbr;
 616         }
 617         return i;
 618 }
 619
 620 static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
 621 {
 622         return ioread8(priv->membase + UART_IIR) &\
 623                       (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
 624 }
 625
 626 static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
 627 {
 628         return ioread8(priv->membase + UART_LSR);
 629 }
 630
 631 static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
 632 {
 633         unsigned int lcr;
 634
 635         lcr = ioread8(priv->membase + UART_LCR);
 636         if (on)
 637                 lcr |= PCH_UART_LCR_SB;
 638         else
 639                 lcr &= ~PCH_UART_LCR_SB;
 640
 641         iowrite8(lcr, priv->membase + UART_LCR);
 642 }
 643
 644 static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
 645                    int size)
 646 {
 647         struct uart_port *port = &priv->port;
 648         struct tty_port *tport = &port->state->port;
 649
 650         tty_insert_flip_string(tport, buf, size);
 651         tty_flip_buffer_push(tport);
 652
 653         return 0;
 654 }
 655
 656 static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
 657 {
 658         int ret = 0;
 659         struct uart_port *port = &priv->port;
 660
 661         if (port->x_char) {
 662                 dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
 663                         __func__, port->x_char, jiffies);
 664                 buf[0] = port->x_char;
 665                 port->x_char = 0;
 666                 ret = 1;
 667         }
 668
 669         return ret;
 670 }
 671
 672 static int dma_push_rx(struct eg20t_port *priv, int size)
 673 {
 674         int room;
 675         struct uart_port *port = &priv->port;
 676         struct tty_port *tport = &port->state->port;
 677
 678         room = tty_buffer_request_room(tport, size);
 679
 680         if (room < size)
 681                 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
 682                          size - room);
 683         if (!room)
 684                 return 0;
 685
 686         tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
 687
 688         port->icount.rx += room;
 689
 690         return room;
 691 }
 692
 693 static void pch_free_dma(struct uart_port *port)
 694 {
 695         struct eg20t_port *priv;
 696         priv = container_of(port, struct eg20t_port, port);
 697
 698         if (priv->chan_tx) {
 699                 dma_release_channel(priv->chan_tx);
 700                 priv->chan_tx = NULL;
 701         }
 702         if (priv->chan_rx) {
 703                 dma_release_channel(priv->chan_rx);
 704                 priv->chan_rx = NULL;
 705         }
 706
 707         if (priv->rx_buf_dma) {
 708                 dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
 709                                   priv->rx_buf_dma);
 710                 priv->rx_buf_virt = NULL;
 711                 priv->rx_buf_dma = 0;
 712         }
 713
 714         return;
 715 }
 716
 717 static bool filter(struct dma_chan *chan, void *slave)
 718 {
 719         struct pch_dma_slave *param = slave;
 720
 721         if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
 722                                                   chan->device->dev)) {
 723                 chan->private = param;
 724                 return true;
 725         } else {
 726                 return false;
 727         }
 728 }
 729
 730 static void pch_request_dma(struct uart_port *port)
 731 {
 732         dma_cap_mask_t mask;
 733         struct dma_chan *chan;
 734         struct pci_dev *dma_dev;
 735         struct pch_dma_slave *param;
 736         struct eg20t_port *priv =
 737                                 container_of(port, struct eg20t_port, port);
 738         dma_cap_zero(mask);
 739         dma_cap_set(DMA_SLAVE, mask);
 740
 741         /* Get DMA's dev information */
 742         dma_dev = pci_get_slot(priv->pdev->bus,
 743                         PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
 744
 745         /* Set Tx DMA */
 746         param = &priv->param_tx;
 747         param->dma_dev = &dma_dev->dev;
 748         param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
 749
 750         param->tx_reg = port->mapbase + UART_TX;
 751         chan = dma_request_channel(mask, filter, param);
 752         if (!chan) {
 753                 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
 754                         __func__);
 755                 return;
 756         }
 757         priv->chan_tx = chan;
 758
 759         /* Set Rx DMA */
 760         param = &priv->param_rx;
 761         param->dma_dev = &dma_dev->dev;
 762         param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
 763
 764         param->rx_reg = port->mapbase + UART_RX;
 765         chan = dma_request_channel(mask, filter, param);
 766         if (!chan) {
 767                 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
 768                         __func__);
 769                 dma_release_channel(priv->chan_tx);
 770                 priv->chan_tx = NULL;
 771                 return;
 772         }
 773
 774         /* Get Consistent memory for DMA */
 775         priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
 776                                     &priv->rx_buf_dma, GFP_KERNEL);
 777         priv->chan_rx = chan;
 778 }
 779
 780 static void pch_dma_rx_complete(void *arg)
 781 {
 782         struct eg20t_port *priv = arg;
 783         struct uart_port *port = &priv->port;
 784         int count;
 785
 786         dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
 787         count = dma_push_rx(priv, priv->trigger_level);
 788         if (count)
 789                 tty_flip_buffer_push(&port->state->port);
 790         async_tx_ack(priv->desc_rx);
 791         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
 792                                             PCH_UART_HAL_RX_ERR_INT);
 793 }
 794
 795 static void pch_dma_tx_complete(void *arg)
 796 {
 797         struct eg20t_port *priv = arg;
 798         struct uart_port *port = &priv->port;
 799         struct circ_buf *xmit = &port->state->xmit;
 800         struct scatterlist *sg = priv->sg_tx_p;
 801         int i;
 802
 803         for (i = 0; i < priv->nent; i++, sg++) {
 804                 xmit->tail += sg_dma_len(sg);
 805                 port->icount.tx += sg_dma_len(sg);
 806         }
 807         xmit->tail &= UART_XMIT_SIZE - 1;
 808         async_tx_ack(priv->desc_tx);
 809         dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
 810         priv->tx_dma_use = 0;
 811         priv->nent = 0;
 812         kfree(priv->sg_tx_p);
 813         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 814 }
 815
 816 static int pop_tx(struct eg20t_port *priv, int size)
 817 {
 818         int count = 0;
 819         struct uart_port *port = &priv->port;
 820         struct circ_buf *xmit = &port->state->xmit;
 821
 822         if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
 823                 goto pop_tx_end;
 824
 825         do {
 826                 int cnt_to_end =
 827                     CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 828                 int sz = min(size - count, cnt_to_end);
 829                 pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
 830                 xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
 831                 count += sz;
 832         } while (!uart_circ_empty(xmit) && count < size);
 833
 834 pop_tx_end:
 835         dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
 836                  count, size - count, jiffies);
 837
 838         return count;
 839 }
 840
 841 static int handle_rx_to(struct eg20t_port *priv)
 842 {
 843         struct pch_uart_buffer *buf;
 844         int rx_size;
 845         int ret;
 846         if (!priv->start_rx) {
 847                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
 848                                                      PCH_UART_HAL_RX_ERR_INT);
 849                 return 0;
 850         }
 851         buf = &priv->rxbuf;
 852         do {
 853                 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
 854                 ret = push_rx(priv, buf->buf, rx_size);
 855                 if (ret)
 856                         return 0;
 857         } while (rx_size == buf->size);
 858
 859         return PCH_UART_HANDLED_RX_INT;
 860 }
 861
 862 static int handle_rx(struct eg20t_port *priv)
 863 {
 864         return handle_rx_to(priv);
 865 }
 866
 867 static int dma_handle_rx(struct eg20t_port *priv)
 868 {
 869         struct uart_port *port = &priv->port;
 870         struct dma_async_tx_descriptor *desc;
 871         struct scatterlist *sg;
 872
 873         priv = container_of(port, struct eg20t_port, port);
 874         sg = &priv->sg_rx;
 875
 876         sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
 877
 878         sg_dma_len(sg) = priv->trigger_level;
 879
 880         sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
 881                      sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
 882                      ~PAGE_MASK);
 883
 884         sg_dma_address(sg) = priv->rx_buf_dma;
 885
 886         desc = dmaengine_prep_slave_sg(priv->chan_rx,
 887                         sg, 1, DMA_DEV_TO_MEM,
 888                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 889
 890         if (!desc)
 891                 return 0;
 892
 893         priv->desc_rx = desc;
 894         desc->callback = pch_dma_rx_complete;
 895         desc->callback_param = priv;
 896         desc->tx_submit(desc);
 897         dma_async_issue_pending(priv->chan_rx);
 898
 899         return PCH_UART_HANDLED_RX_INT;
 900 }
 901
 902 static unsigned int handle_tx(struct eg20t_port *priv)
 903 {
 904         struct uart_port *port = &priv->port;
 905         struct circ_buf *xmit = &port->state->xmit;
 906         int fifo_size;
 907         int tx_size;
 908         int size;
 909         int tx_empty;
 910
 911         if (!priv->start_tx) {
 912                 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
 913                         __func__, jiffies);
 914                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 915                 priv->tx_empty = 1;
 916                 return 0;
 917         }
 918
 919         fifo_size = max(priv->fifo_size, 1);
 920         tx_empty = 1;
 921         if (pop_tx_x(priv, xmit->buf)) {
 922                 pch_uart_hal_write(priv, xmit->buf, 1);
 923                 port->icount.tx++;
 924                 tx_empty = 0;
 925                 fifo_size--;
 926         }
 927         size = min(xmit->head - xmit->tail, fifo_size);
 928         if (size < 0)
 929                 size = fifo_size;
 930
 931         tx_size = pop_tx(priv, size);
 932         if (tx_size > 0) {
 933                 port->icount.tx += tx_size;
 934                 tx_empty = 0;
 935         }
 936
 937         priv->tx_empty = tx_empty;
 938
 939         if (tx_empty) {
 940                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 941                 uart_write_wakeup(port);
 942         }
 943
 944         return PCH_UART_HANDLED_TX_INT;
 945 }
 946
 947 static unsigned int dma_handle_tx(struct eg20t_port *priv)
 948 {
 949         struct uart_port *port = &priv->port;
 950         struct circ_buf *xmit = &port->state->xmit;
 951         struct scatterlist *sg;
 952         int nent;
 953         int fifo_size;
 954         int tx_empty;
 955         struct dma_async_tx_descriptor *desc;
 956         int num;
 957         int i;
 958         int bytes;
 959         int size;
 960         int rem;
 961
 962         if (!priv->start_tx) {
 963                 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
 964                         __func__, jiffies);
 965                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 966                 priv->tx_empty = 1;
 967                 return 0;
 968         }
 969
 970         if (priv->tx_dma_use) {
 971                 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
 972                         __func__, jiffies);
 973                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 974                 priv->tx_empty = 1;
 975                 return 0;
 976         }
 977
 978         fifo_size = max(priv->fifo_size, 1);
 979         tx_empty = 1;
 980         if (pop_tx_x(priv, xmit->buf)) {
 981                 pch_uart_hal_write(priv, xmit->buf, 1);
 982                 port->icount.tx++;
 983                 tx_empty = 0;
 984                 fifo_size--;
 985         }
 986
 987         bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
 988                              UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
 989                              xmit->tail, UART_XMIT_SIZE));
 990         if (!bytes) {
 991                 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
 992                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 993                 uart_write_wakeup(port);
 994                 return 0;
 995         }
 996
 997         if (bytes > fifo_size) {
 998                 num = bytes / fifo_size + 1;
 999                 size = fifo_size;
1000                 rem = bytes % fifo_size;
1001         } else {
1002                 num = 1;
1003                 size = bytes;
1004                 rem = bytes;
1005         }
1006
1007         dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
1008                 __func__, num, size, rem);
1009
1010         priv->tx_dma_use = 1;
1011
1012         priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
1013         if (!priv->sg_tx_p) {
1014                 dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
1015                 return 0;
1016         }
1017
1018         sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
1019         sg = priv->sg_tx_p;
1020
1021         for (i = 0; i < num; i++, sg++) {
1022                 if (i == (num - 1))
1023                         sg_set_page(sg, virt_to_page(xmit->buf),
1024                                     rem, fifo_size * i);
1025                 else
1026                         sg_set_page(sg, virt_to_page(xmit->buf),
1027                                     size, fifo_size * i);
1028         }
1029
1030         sg = priv->sg_tx_p;
1031         nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
1032         if (!nent) {
1033                 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
1034                 return 0;
1035         }
1036         priv->nent = nent;
1037
1038         for (i = 0; i < nent; i++, sg++) {
1039                 sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
1040                               fifo_size * i;
1041                 sg_dma_address(sg) = (sg_dma_address(sg) &
1042                                     ~(UART_XMIT_SIZE - 1)) + sg->offset;
1043                 if (i == (nent - 1))
1044                         sg_dma_len(sg) = rem;
1045                 else
1046                         sg_dma_len(sg) = size;
1047         }
1048
1049         desc = dmaengine_prep_slave_sg(priv->chan_tx,
1050                                         priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
1051                                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1052         if (!desc) {
1053                 dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
1054                         __func__);
1055                 return 0;
1056         }
1057         dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
1058         priv->desc_tx = desc;
1059         desc->callback = pch_dma_tx_complete;
1060         desc->callback_param = priv;
1061
1062         desc->tx_submit(desc);
1063
1064         dma_async_issue_pending(priv->chan_tx);
1065
1066         return PCH_UART_HANDLED_TX_INT;
1067 }
1068
1069 static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
1070 {
1071         struct uart_port *port = &priv->port;
1072         struct tty_struct *tty = tty_port_tty_get(&port->state->port);
1073         char   *error_msg[5] = {};
1074         int    i = 0;
1075
1076         if (lsr & PCH_UART_LSR_ERR)
1077                 error_msg[i++] = "Error data in FIFO\n";
1078
1079         if (lsr & UART_LSR_FE) {
1080                 port->icount.frame++;
1081                 error_msg[i++] = "  Framing Error\n";
1082         }
1083
1084         if (lsr & UART_LSR_PE) {
1085                 port->icount.parity++;
1086                 error_msg[i++] = "  Parity Error\n";
1087         }
1088
1089         if (lsr & UART_LSR_OE) {
1090                 port->icount.overrun++;
1091                 error_msg[i++] = "  Overrun Error\n";
1092         }
1093
1094         if (tty == NULL) {
1095                 for (i = 0; error_msg[i] != NULL; i++)
1096                         dev_err(&priv->pdev->dev, error_msg[i]);
1097         } else {
1098                 tty_kref_put(tty);
1099         }
1100 }
1101
1102 static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
1103 {
1104         struct eg20t_port *priv = dev_id;
1105         unsigned int handled;
1106         u8 lsr;
1107         int ret = 0;
1108         unsigned char iid;
1109         unsigned long flags;
1110         int next = 1;
1111         u8 msr;
1112
1113         spin_lock_irqsave(&priv->lock, flags);
1114         handled = 0;
1115         while (next) {
1116                 iid = pch_uart_hal_get_iid(priv);
1117                 if (iid & PCH_UART_IIR_IP) /* No Interrupt */
1118                         break;
1119                 switch (iid) {
1120                 case PCH_UART_IID_RLS:  /* Receiver Line Status */
1121                         lsr = pch_uart_hal_get_line_status(priv);
1122                         if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
1123                                                 UART_LSR_PE | UART_LSR_OE)) {
1124                                 pch_uart_err_ir(priv, lsr);
1125                                 ret = PCH_UART_HANDLED_RX_ERR_INT;
1126                         } else {
1127                                 ret = PCH_UART_HANDLED_LS_INT;
1128                         }
1129                         break;
1130                 case PCH_UART_IID_RDR:  /* Received Data Ready */
1131                         if (priv->use_dma) {
1132                                 pch_uart_hal_disable_interrupt(priv,
1133                                                 PCH_UART_HAL_RX_INT |
1134                                                 PCH_UART_HAL_RX_ERR_INT);
1135                                 ret = dma_handle_rx(priv);
1136                                 if (!ret)
1137                                         pch_uart_hal_enable_interrupt(priv,
1138                                                 PCH_UART_HAL_RX_INT |
1139                                                 PCH_UART_HAL_RX_ERR_INT);
1140                         } else {
1141                                 ret = handle_rx(priv);
1142                         }
1143                         break;
1144                 case PCH_UART_IID_RDR_TO:       /* Received Data Ready
1145                                                    (FIFO Timeout) */
1146                         ret = handle_rx_to(priv);
1147                         break;
1148                 case PCH_UART_IID_THRE: /* Transmitter Holding Register
1149                                                    Empty */
1150                         if (priv->use_dma)
1151                                 ret = dma_handle_tx(priv);
1152                         else
1153                                 ret = handle_tx(priv);
1154                         break;
1155                 case PCH_UART_IID_MS:   /* Modem Status */
1156                         msr = pch_uart_hal_get_modem(priv);
1157                         next = 0; /* MS ir prioirty is the lowest. So, MS ir
1158                                      means final interrupt */
1159                         if ((msr & UART_MSR_ANY_DELTA) == 0)
1160                                 break;
1161                         ret |= PCH_UART_HANDLED_MS_INT;
1162                         break;
1163                 default:        /* Never junp to this label */
1164                         dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
1165                                 iid, jiffies);
1166                         ret = -1;
1167                         next = 0;
1168                         break;
1169                 }
1170                 handled |= (unsigned int)ret;
1171         }
1172
1173         spin_unlock_irqrestore(&priv->lock, flags);
1174         return IRQ_RETVAL(handled);
1175 }
1176
1177 /* This function tests whether the transmitter fifo and shifter for the port
1178                                                 described by 'port' is empty. */
1179 static unsigned int pch_uart_tx_empty(struct uart_port *port)
1180 {
1181         struct eg20t_port *priv;
1182
1183         priv = container_of(port, struct eg20t_port, port);
1184         if (priv->tx_empty)
1185                 return TIOCSER_TEMT;
1186         else
1187                 return 0;
1188 }
1189
1190 /* Returns the current state of modem control inputs. */
1191 static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1192 {
1193         struct eg20t_port *priv;
1194         u8 modem;
1195         unsigned int ret = 0;
1196
1197         priv = container_of(port, struct eg20t_port, port);
1198         modem = pch_uart_hal_get_modem(priv);
1199
1200         if (modem & UART_MSR_DCD)
1201                 ret |= TIOCM_CAR;
1202
1203         if (modem & UART_MSR_RI)
1204                 ret |= TIOCM_RNG;
1205
1206         if (modem & UART_MSR_DSR)
1207                 ret |= TIOCM_DSR;
1208
1209         if (modem & UART_MSR_CTS)
1210                 ret |= TIOCM_CTS;
1211
1212         return ret;
1213 }
1214
1215 static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1216 {
1217         u32 mcr = 0;
1218         struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1219
1220         if (mctrl & TIOCM_DTR)
1221                 mcr |= UART_MCR_DTR;
1222         if (mctrl & TIOCM_RTS)
1223                 mcr |= UART_MCR_RTS;
1224         if (mctrl & TIOCM_LOOP)
1225                 mcr |= UART_MCR_LOOP;
1226
1227         if (priv->mcr & UART_MCR_AFE)
1228                 mcr |= UART_MCR_AFE;
1229
1230         if (mctrl)
1231                 iowrite8(mcr, priv->membase + UART_MCR);
1232 }
1233
1234 static void pch_uart_stop_tx(struct uart_port *port)
1235 {
1236         struct eg20t_port *priv;
1237         priv = container_of(port, struct eg20t_port, port);
1238         priv->start_tx = 0;
1239         priv->tx_dma_use = 0;
1240 }
1241
1242 static void pch_uart_start_tx(struct uart_port *port)
1243 {
1244         struct eg20t_port *priv;
1245
1246         priv = container_of(port, struct eg20t_port, port);
1247
1248         if (priv->use_dma) {
1249                 if (priv->tx_dma_use) {
1250                         dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1251                                 __func__);
1252                         return;
1253                 }
1254         }
1255
1256         priv->start_tx = 1;
1257         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1258 }
1259
1260 static void pch_uart_stop_rx(struct uart_port *port)
1261 {
1262         struct eg20t_port *priv;
1263         priv = container_of(port, struct eg20t_port, port);
1264         priv->start_rx = 0;
1265         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
1266                                              PCH_UART_HAL_RX_ERR_INT);
1267 }
1268
1269 /* Enable the modem status interrupts. */
1270 static void pch_uart_enable_ms(struct uart_port *port)
1271 {
1272         struct eg20t_port *priv;
1273         priv = container_of(port, struct eg20t_port, port);
1274         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1275 }
1276
1277 /* Control the transmission of a break signal. */
1278 static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1279 {
1280         struct eg20t_port *priv;
1281         unsigned long flags;
1282
1283         priv = container_of(port, struct eg20t_port, port);
1284         spin_lock_irqsave(&priv->lock, flags);
1285         pch_uart_hal_set_break(priv, ctl);
1286         spin_unlock_irqrestore(&priv->lock, flags);
1287 }
1288
1289 /* Grab any interrupt resources and initialise any low level driver state. */
1290 static int pch_uart_startup(struct uart_port *port)
1291 {
1292         struct eg20t_port *priv;
1293         int ret;
1294         int fifo_size;
1295         int trigger_level;
1296
1297         priv = container_of(port, struct eg20t_port, port);
1298         priv->tx_empty = 1;
1299
1300         if (port->uartclk)
1301                 priv->uartclk = port->uartclk;
1302         else
1303                 port->uartclk = priv->uartclk;
1304
1305         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1306         ret = pch_uart_hal_set_line(priv, default_baud,
1307                               PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1308                               PCH_UART_HAL_STB1);
1309         if (ret)
1310                 return ret;
1311
1312         switch (priv->fifo_size) {
1313         case 256:
1314                 fifo_size = PCH_UART_HAL_FIFO256;
1315                 break;
1316         case 64:
1317                 fifo_size = PCH_UART_HAL_FIFO64;
1318                 break;
1319         case 16:
1320                 fifo_size = PCH_UART_HAL_FIFO16;
1321                 break;
1322         case 1:
1323         default:
1324                 fifo_size = PCH_UART_HAL_FIFO_DIS;
1325                 break;
1326         }
1327
1328         switch (priv->trigger) {
1329         case PCH_UART_HAL_TRIGGER1:
1330                 trigger_level = 1;
1331                 break;
1332         case PCH_UART_HAL_TRIGGER_L:
1333                 trigger_level = priv->fifo_size / 4;
1334                 break;
1335         case PCH_UART_HAL_TRIGGER_M:
1336                 trigger_level = priv->fifo_size / 2;
1337                 break;
1338         case PCH_UART_HAL_TRIGGER_H:
1339         default:
1340                 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1341                 break;
1342         }
1343
1344         priv->trigger_level = trigger_level;
1345         ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1346                                     fifo_size, priv->trigger);
1347         if (ret < 0)
1348                 return ret;
1349
1350         ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1351                         priv->irq_name, priv);
1352         if (ret < 0)
1353                 return ret;
1354
1355         if (priv->use_dma)
1356                 pch_request_dma(port);
1357
1358         priv->start_rx = 1;
1359         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
1360                                             PCH_UART_HAL_RX_ERR_INT);
1361         uart_update_timeout(port, CS8, default_baud);
1362
1363         return 0;
1364 }
1365
1366 static void pch_uart_shutdown(struct uart_port *port)
1367 {
1368         struct eg20t_port *priv;
1369         int ret;
1370
1371         priv = container_of(port, struct eg20t_port, port);
1372         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1373         pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1374         ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1375                               PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1376         if (ret)
1377                 dev_err(priv->port.dev,
1378                         "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1379
1380         pch_free_dma(port);
1381
1382         free_irq(priv->port.irq, priv);
1383 }
1384
1385 /* Change the port parameters, including word length, parity, stop
1386  *bits.  Update read_status_mask and ignore_status_mask to indicate
1387  *the types of events we are interested in receiving.  */
1388 static void pch_uart_set_termios(struct uart_port *port,
1389                                  struct ktermios *termios, struct ktermios *old)
1390 {
1391         int rtn;
1392         unsigned int baud, parity, bits, stb;
1393         struct eg20t_port *priv;
1394         unsigned long flags;
1395
1396         priv = container_of(port, struct eg20t_port, port);
1397         switch (termios->c_cflag & CSIZE) {
1398         case CS5:
1399                 bits = PCH_UART_HAL_5BIT;
1400                 break;
1401         case CS6:
1402                 bits = PCH_UART_HAL_6BIT;
1403                 break;
1404         case CS7:
1405                 bits = PCH_UART_HAL_7BIT;
1406                 break;
1407         default:                /* CS8 */
1408                 bits = PCH_UART_HAL_8BIT;
1409                 break;
1410         }
1411         if (termios->c_cflag & CSTOPB)
1412                 stb = PCH_UART_HAL_STB2;
1413         else
1414                 stb = PCH_UART_HAL_STB1;
1415
1416         if (termios->c_cflag & PARENB) {
1417                 if (termios->c_cflag & PARODD)
1418                         parity = PCH_UART_HAL_PARITY_ODD;
1419                 else
1420                         parity = PCH_UART_HAL_PARITY_EVEN;
1421
1422         } else
1423                 parity = PCH_UART_HAL_PARITY_NONE;
1424
1425         /* Only UART0 has auto hardware flow function */
1426         if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1427                 priv->mcr |= UART_MCR_AFE;
1428         else
1429                 priv->mcr &= ~UART_MCR_AFE;
1430
1431         termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1432
1433         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1434
1435         spin_lock_irqsave(&priv->lock, flags);
1436         spin_lock(&port->lock);
1437
1438         uart_update_timeout(port, termios->c_cflag, baud);
1439         rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1440         if (rtn)
1441                 goto out;
1442
1443         pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
1444         /* Don't rewrite B0 */
1445         if (tty_termios_baud_rate(termios))
1446                 tty_termios_encode_baud_rate(termios, baud, baud);
1447
1448 out:
1449         spin_unlock(&port->lock);
1450         spin_unlock_irqrestore(&priv->lock, flags);
1451 }
1452
1453 static const char *pch_uart_type(struct uart_port *port)
1454 {
1455         return KBUILD_MODNAME;
1456 }
1457
1458 static void pch_uart_release_port(struct uart_port *port)
1459 {
1460         struct eg20t_port *priv;
1461
1462         priv = container_of(port, struct eg20t_port, port);
1463         pci_iounmap(priv->pdev, priv->membase);
1464         pci_release_regions(priv->pdev);
1465 }
1466
1467 static int pch_uart_request_port(struct uart_port *port)
1468 {
1469         struct eg20t_port *priv;
1470         int ret;
1471         void __iomem *membase;
1472
1473         priv = container_of(port, struct eg20t_port, port);
1474         ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1475         if (ret < 0)
1476                 return -EBUSY;
1477
1478         membase = pci_iomap(priv->pdev, 1, 0);
1479         if (!membase) {
1480                 pci_release_regions(priv->pdev);
1481                 return -EBUSY;
1482         }
1483         priv->membase = port->membase = membase;
1484
1485         return 0;
1486 }
1487
1488 static void pch_uart_config_port(struct uart_port *port, int type)
1489 {
1490         struct eg20t_port *priv;
1491
1492         priv = container_of(port, struct eg20t_port, port);
1493         if (type & UART_CONFIG_TYPE) {
1494                 port->type = priv->port_type;
1495                 pch_uart_request_port(port);
1496         }
1497 }
1498
1499 static int pch_uart_verify_port(struct uart_port *port,
1500                                 struct serial_struct *serinfo)
1501 {
1502         struct eg20t_port *priv;
1503
1504         priv = container_of(port, struct eg20t_port, port);
1505         if (serinfo->flags & UPF_LOW_LATENCY) {
1506                 dev_info(priv->port.dev,
1507                         "PCH UART : Use PIO Mode (without DMA)\n");
1508                 priv->use_dma = 0;
1509                 serinfo->flags &= ~UPF_LOW_LATENCY;
1510         } else {
1511 #ifndef CONFIG_PCH_DMA
1512                 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1513                         __func__);
1514                 return -EOPNOTSUPP;
1515 #endif
1516                 if (!priv->use_dma) {
1517                         pch_request_dma(port);
1518                         if (priv->chan_rx)
1519                                 priv->use_dma = 1;
1520                 }
1521                 dev_info(priv->port.dev, "PCH UART: %s\n",
1522                                 priv->use_dma ?
1523                                 "Use DMA Mode" : "No DMA");
1524         }
1525
1526         return 0;
1527 }
1528
1529 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
1530 /*
1531  *      Wait for transmitter & holding register to empty
1532  */
1533 static void wait_for_xmitr(struct eg20t_port *up, int bits)
1534 {
1535         unsigned int status, tmout = 10000;
1536
1537         /* Wait up to 10ms for the character(s) to be sent. */
1538         for (;;) {
1539                 status = ioread8(up->membase + UART_LSR);
1540
1541                 if ((status & bits) == bits)
1542                         break;
1543                 if (--tmout == 0)
1544                         break;
1545                 udelay(1);
1546         }
1547
1548         /* Wait up to 1s for flow control if necessary */
1549         if (up->port.flags & UPF_CONS_FLOW) {
1550                 unsigned int tmout;
1551                 for (tmout = 1000000; tmout; tmout--) {
1552                         unsigned int msr = ioread8(up->membase + UART_MSR);
1553                         if (msr & UART_MSR_CTS)
1554                                 break;
1555                         udelay(1);
1556                         touch_nmi_watchdog();
1557                 }
1558         }
1559 }
1560 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
1561
1562 #ifdef CONFIG_CONSOLE_POLL
1563 /*
1564  * Console polling routines for communicate via uart while
1565  * in an interrupt or debug context.
1566  */
1567 static int pch_uart_get_poll_char(struct uart_port *port)
1568 {
1569         struct eg20t_port *priv =
1570                 container_of(port, struct eg20t_port, port);
1571         u8 lsr = ioread8(priv->membase + UART_LSR);
1572
1573         if (!(lsr & UART_LSR_DR))
1574                 return NO_POLL_CHAR;
1575
1576         return ioread8(priv->membase + PCH_UART_RBR);
1577 }
1578
1579
1580 static void pch_uart_put_poll_char(struct uart_port *port,
1581                          unsigned char c)
1582 {
1583         unsigned int ier;
1584         struct eg20t_port *priv =
1585                 container_of(port, struct eg20t_port, port);
1586
1587         /*
1588          * First save the IER then disable the interrupts
1589          */
1590         ier = ioread8(priv->membase + UART_IER);
1591         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1592
1593         wait_for_xmitr(priv, UART_LSR_THRE);
1594         /*
1595          * Send the character out.
1596          */
1597         iowrite8(c, priv->membase + PCH_UART_THR);
1598
1599         /*
1600          * Finally, wait for transmitter to become empty
1601          * and restore the IER
1602          */
1603         wait_for_xmitr(priv, BOTH_EMPTY);
1604         iowrite8(ier, priv->membase + UART_IER);
1605 }
1606 #endif /* CONFIG_CONSOLE_POLL */
1607
1608 static const struct uart_ops pch_uart_ops = {
1609         .tx_empty = pch_uart_tx_empty,
1610         .set_mctrl = pch_uart_set_mctrl,
1611         .get_mctrl = pch_uart_get_mctrl,
1612         .stop_tx = pch_uart_stop_tx,
1613         .start_tx = pch_uart_start_tx,
1614         .stop_rx = pch_uart_stop_rx,
1615         .enable_ms = pch_uart_enable_ms,
1616         .break_ctl = pch_uart_break_ctl,
1617         .startup = pch_uart_startup,
1618         .shutdown = pch_uart_shutdown,
1619         .set_termios = pch_uart_set_termios,
1620 /*      .pm             = pch_uart_pm,          Not supported yet */
1621         .type = pch_uart_type,
1622         .release_port = pch_uart_release_port,
1623         .request_port = pch_uart_request_port,
1624         .config_port = pch_uart_config_port,
1625         .verify_port = pch_uart_verify_port,
1626 #ifdef CONFIG_CONSOLE_POLL
1627         .poll_get_char = pch_uart_get_poll_char,
1628         .poll_put_char = pch_uart_put_poll_char,
1629 #endif
1630 };
1631
1632 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1633
1634 static void pch_console_putchar(struct uart_port *port, int ch)
1635 {
1636         struct eg20t_port *priv =
1637                 container_of(port, struct eg20t_port, port);
1638
1639         wait_for_xmitr(priv, UART_LSR_THRE);
1640         iowrite8(ch, priv->membase + PCH_UART_THR);
1641 }
1642
1643 /*
1644  *      Print a string to the serial port trying not to disturb
1645  *      any possible real use of the port...
1646  *
1647  *      The console_lock must be held when we get here.
1648  */
1649 static void
1650 pch_console_write(struct console *co, const char *s, unsigned int count)
1651 {
1652         struct eg20t_port *priv;
1653         unsigned long flags;
1654         int priv_locked = 1;
1655         int port_locked = 1;
1656         u8 ier;
1657
1658         priv = pch_uart_ports[co->index];
1659
1660         touch_nmi_watchdog();
1661
1662         local_irq_save(flags);
1663         if (priv->port.sysrq) {
1664                 /* call to uart_handle_sysrq_char already took the priv lock */
1665                 priv_locked = 0;
1666                 /* serial8250_handle_port() already took the port lock */
1667                 port_locked = 0;
1668         } else if (oops_in_progress) {
1669                 priv_locked = spin_trylock(&priv->lock);
1670                 port_locked = spin_trylock(&priv->port.lock);
1671         } else {
1672                 spin_lock(&priv->lock);
1673                 spin_lock(&priv->port.lock);
1674         }
1675
1676         /*
1677          *      First save the IER then disable the interrupts
1678          */
1679         ier = ioread8(priv->membase + UART_IER);
1680
1681         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1682
1683         uart_console_write(&priv->port, s, count, pch_console_putchar);
1684
1685         /*
1686          *      Finally, wait for transmitter to become empty
1687          *      and restore the IER
1688          */
1689         wait_for_xmitr(priv, BOTH_EMPTY);
1690         iowrite8(ier, priv->membase + UART_IER);
1691
1692         if (port_locked)
1693                 spin_unlock(&priv->port.lock);
1694         if (priv_locked)
1695                 spin_unlock(&priv->lock);
1696         local_irq_restore(flags);
1697 }
1698
1699 static int __init pch_console_setup(struct console *co, char *options)
1700 {
1701         struct uart_port *port;
1702         int baud = default_baud;
1703         int bits = 8;
1704         int parity = 'n';
1705         int flow = 'n';
1706
1707         /*
1708          * Check whether an invalid uart number has been specified, and
1709          * if so, search for the first available port that does have
1710          * console support.
1711          */
1712         if (co->index >= PCH_UART_NR)
1713                 co->index = 0;
1714         port = &pch_uart_ports[co->index]->port;
1715
1716         if (!port || (!port->iobase && !port->membase))
1717                 return -ENODEV;
1718
1719         port->uartclk = pch_uart_get_uartclk();
1720
1721         if (options)
1722                 uart_parse_options(options, &baud, &parity, &bits, &flow);
1723
1724         return uart_set_options(port, co, baud, parity, bits, flow);
1725 }
1726
1727 static struct uart_driver pch_uart_driver;
1728
1729 static struct console pch_console = {
1730         .name           = PCH_UART_DRIVER_DEVICE,
1731         .write          = pch_console_write,
1732         .device         = uart_console_device,
1733         .setup          = pch_console_setup,
1734         .flags          = CON_PRINTBUFFER | CON_ANYTIME,
1735         .index          = -1,
1736         .data           = &pch_uart_driver,
1737 };
1738
1739 #define PCH_CONSOLE     (&pch_console)
1740 #else
1741 #define PCH_CONSOLE     NULL
1742 #endif  /* CONFIG_SERIAL_PCH_UART_CONSOLE */
1743
1744 static struct uart_driver pch_uart_driver = {
1745         .owner = THIS_MODULE,
1746         .driver_name = KBUILD_MODNAME,
1747         .dev_name = PCH_UART_DRIVER_DEVICE,
1748         .major = 0,
1749         .minor = 0,
1750         .nr = PCH_UART_NR,
1751         .cons = PCH_CONSOLE,
1752 };
1753
1754 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1755                                              const struct pci_device_id *id)
1756 {
1757         struct eg20t_port *priv;
1758         int ret;
1759         unsigned int iobase;
1760         unsigned int mapbase;
1761         unsigned char *rxbuf;
1762         int fifosize;
1763         int port_type;
1764         struct pch_uart_driver_data *board;
1765 #ifdef CONFIG_DEBUG_FS
1766         char name[32];  /* for debugfs file name */
1767 #endif
1768
1769         board = &drv_dat[id->driver_data];
1770         port_type = board->port_type;
1771
1772         priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1773         if (priv == NULL)
1774                 goto init_port_alloc_err;
1775
1776         rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1777         if (!rxbuf)
1778                 goto init_port_free_txbuf;
1779
1780         switch (port_type) {
1781         case PORT_UNKNOWN:
1782                 fifosize = 256; /* EG20T/ML7213: UART0 */
1783                 break;
1784         case PORT_8250:
1785                 fifosize = 64; /* EG20T:UART1~3  ML7213: UART1~2*/
1786                 break;
1787         default:
1788                 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1789                 goto init_port_hal_free;
1790         }
1791
1792         pci_enable_msi(pdev);
1793         pci_set_master(pdev);
1794
1795         spin_lock_init(&priv->lock);
1796
1797         iobase = pci_resource_start(pdev, 0);
1798         mapbase = pci_resource_start(pdev, 1);
1799         priv->mapbase = mapbase;
1800         priv->iobase = iobase;
1801         priv->pdev = pdev;
1802         priv->tx_empty = 1;
1803         priv->rxbuf.buf = rxbuf;
1804         priv->rxbuf.size = PAGE_SIZE;
1805
1806         priv->fifo_size = fifosize;
1807         priv->uartclk = pch_uart_get_uartclk();
1808         priv->port_type = PORT_MAX_8250 + port_type + 1;
1809         priv->port.dev = &pdev->dev;
1810         priv->port.iobase = iobase;
1811         priv->port.membase = NULL;
1812         priv->port.mapbase = mapbase;
1813         priv->port.irq = pdev->irq;
1814         priv->port.iotype = UPIO_PORT;
1815         priv->port.ops = &pch_uart_ops;
1816         priv->port.flags = UPF_BOOT_AUTOCONF;
1817         priv->port.fifosize = fifosize;
1818         priv->port.line = board->line_no;
1819         priv->trigger = PCH_UART_HAL_TRIGGER_M;
1820
1821         snprintf(priv->irq_name, IRQ_NAME_SIZE,
1822                  KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
1823                  priv->port.line);
1824
1825         spin_lock_init(&priv->port.lock);
1826
1827         pci_set_drvdata(pdev, priv);
1828         priv->trigger_level = 1;
1829         priv->fcr = 0;
1830
1831         if (pdev->dev.of_node)
1832                 of_property_read_u32(pdev->dev.of_node, "clock-frequency"
1833                                          , &user_uartclk);
1834
1835 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1836         pch_uart_ports[board->line_no] = priv;
1837 #endif
1838         ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1839         if (ret < 0)
1840                 goto init_port_hal_free;
1841
1842 #ifdef CONFIG_DEBUG_FS
1843         snprintf(name, sizeof(name), "uart%d_regs", board->line_no);
1844         priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO,
1845                                 NULL, priv, &port_regs_ops);
1846 #endif
1847
1848         return priv;
1849
1850 init_port_hal_free:
1851 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1852         pch_uart_ports[board->line_no] = NULL;
1853 #endif
1854         free_page((unsigned long)rxbuf);
1855 init_port_free_txbuf:
1856         kfree(priv);
1857 init_port_alloc_err:
1858
1859         return NULL;
1860 }
1861
1862 static void pch_uart_exit_port(struct eg20t_port *priv)
1863 {
1864
1865 #ifdef CONFIG_DEBUG_FS
1866         if (priv->debugfs)
1867                 debugfs_remove(priv->debugfs);
1868 #endif
1869         uart_remove_one_port(&pch_uart_driver, &priv->port);
1870         free_page((unsigned long)priv->rxbuf.buf);
1871 }
1872
1873 static void pch_uart_pci_remove(struct pci_dev *pdev)
1874 {
1875         struct eg20t_port *priv = pci_get_drvdata(pdev);
1876
1877         pci_disable_msi(pdev);
1878
1879 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1880         pch_uart_ports[priv->port.line] = NULL;
1881 #endif
1882         pch_uart_exit_port(priv);
1883         pci_disable_device(pdev);
1884         kfree(priv);
1885         return;
1886 }
1887 #ifdef CONFIG_PM
1888 static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1889 {
1890         struct eg20t_port *priv = pci_get_drvdata(pdev);
1891
1892         uart_suspend_port(&pch_uart_driver, &priv->port);
1893
1894         pci_save_state(pdev);
1895         pci_set_power_state(pdev, pci_choose_state(pdev, state));
1896         return 0;
1897 }
1898
1899 static int pch_uart_pci_resume(struct pci_dev *pdev)
1900 {
1901         struct eg20t_port *priv = pci_get_drvdata(pdev);
1902         int ret;
1903
1904         pci_set_power_state(pdev, PCI_D0);
1905         pci_restore_state(pdev);
1906
1907         ret = pci_enable_device(pdev);
1908         if (ret) {
1909                 dev_err(&pdev->dev,
1910                 "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
1911                 return ret;
1912         }
1913
1914         uart_resume_port(&pch_uart_driver, &priv->port);
1915
1916         return 0;
1917 }
1918 #else
1919 #define pch_uart_pci_suspend NULL
1920 #define pch_uart_pci_resume NULL
1921 #endif
1922
1923 static const struct pci_device_id pch_uart_pci_id[] = {
1924         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1925          .driver_data = pch_et20t_uart0},
1926         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1927          .driver_data = pch_et20t_uart1},
1928         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1929          .driver_data = pch_et20t_uart2},
1930         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1931          .driver_data = pch_et20t_uart3},
1932         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1933          .driver_data = pch_ml7213_uart0},
1934         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1935          .driver_data = pch_ml7213_uart1},
1936         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1937          .driver_data = pch_ml7213_uart2},
1938         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1939          .driver_data = pch_ml7223_uart0},
1940         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1941          .driver_data = pch_ml7223_uart1},
1942         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
1943          .driver_data = pch_ml7831_uart0},
1944         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
1945          .driver_data = pch_ml7831_uart1},
1946         {0,},
1947 };
1948
1949 static int pch_uart_pci_probe(struct pci_dev *pdev,
1950                                         const struct pci_device_id *id)
1951 {
1952         int ret;
1953         struct eg20t_port *priv;
1954
1955         ret = pci_enable_device(pdev);
1956         if (ret < 0)
1957                 goto probe_error;
1958
1959         priv = pch_uart_init_port(pdev, id);
1960         if (!priv) {
1961                 ret = -EBUSY;
1962                 goto probe_disable_device;
1963         }
1964         pci_set_drvdata(pdev, priv);
1965
1966         return ret;
1967
1968 probe_disable_device:
1969         pci_disable_msi(pdev);
1970         pci_disable_device(pdev);
1971 probe_error:
1972         return ret;
1973 }
1974
1975 static struct pci_driver pch_uart_pci_driver = {
1976         .name = "pch_uart",
1977         .id_table = pch_uart_pci_id,
1978         .probe = pch_uart_pci_probe,
1979         .remove = pch_uart_pci_remove,
1980         .suspend = pch_uart_pci_suspend,
1981         .resume = pch_uart_pci_resume,
1982 };
1983
1984 static int __init pch_uart_module_init(void)
1985 {
1986         int ret;
1987
1988         /* register as UART driver */
1989         ret = uart_register_driver(&pch_uart_driver);
1990         if (ret < 0)
1991                 return ret;
1992
1993         /* register as PCI driver */
1994         ret = pci_register_driver(&pch_uart_pci_driver);
1995         if (ret < 0)
1996                 uart_unregister_driver(&pch_uart_driver);
1997
1998         return ret;
1999 }
2000 module_init(pch_uart_module_init);
2001
2002 static void __exit pch_uart_module_exit(void)
2003 {
2004         pci_unregister_driver(&pch_uart_pci_driver);
2005         uart_unregister_driver(&pch_uart_driver);
2006 }
2007 module_exit(pch_uart_module_exit);
2008
2009 MODULE_LICENSE("GPL v2");
2010 MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
2011 MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
2012
2013 module_param(default_baud, uint, S_IRUGO);
2014 MODULE_PARM_DESC(default_baud,
2015                  "Default BAUD for initial driver state and console (default 9600)");
2016 module_param(user_uartclk, uint, S_IRUGO);
2017 MODULE_PARM_DESC(user_uartclk,
2018                  "Override UART default or board specific UART clock");