drivers/usb/atm/ueagle-atm.c

   1 /*-
   2  * Copyright (c) 2003, 2004
   3  *      Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
   4  *
   5  * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr>
   6  * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl>
   7  *
   8  * This software is available to you under a choice of one of two
   9  * licenses. You may choose to be licensed under the terms of the GNU
  10  * General Public License (GPL) Version 2, available from the file
  11  * COPYING in the main directory of this source tree, or the
  12  * BSD license below:
  13  *
  14  * Redistribution and use in source and binary forms, with or without
  15  * modification, are permitted provided that the following conditions
  16  * are met:
  17  * 1. Redistributions of source code must retain the above copyright
  18  *    notice unmodified, this list of conditions, and the following
  19  *    disclaimer.
  20  * 2. Redistributions in binary form must reproduce the above copyright
  21  *    notice, this list of conditions and the following disclaimer in the
  22  *    documentation and/or other materials provided with the distribution.
  23  *
  24  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  25  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  27  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  28  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  29  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  30  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  31  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  32  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  33  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  34  * SUCH DAMAGE.
  35  *
  36  * GPL license :
  37  * This program is free software; you can redistribute it and/or
  38  * modify it under the terms of the GNU General Public License
  39  * as published by the Free Software Foundation; either version 2
  40  * of the License, or (at your option) any later version.
  41  *
  42  * This program is distributed in the hope that it will be useful,
  43  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  44  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  45  * GNU General Public License for more details.
  46  *
  47  * You should have received a copy of the GNU General Public License
  48  * along with this program; if not, write to the Free Software
  49  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  50  *
  51  *
  52  * HISTORY : some part of the code was base on ueagle 1.3 BSD driver,
  53  * Damien Bergamini agree to put his code under a DUAL GPL/BSD license.
  54  *
  55  * The rest of the code was was rewritten from scratch.
  56  */
  57
  58 #include <linux/module.h>
  59 #include <linux/moduleparam.h>
  60 #include <linux/init.h>
  61 #include <linux/crc32.h>
  62 #include <linux/usb.h>
  63 #include <linux/firmware.h>
  64 #include <linux/ctype.h>
  65 #include <linux/sched.h>
  66 #include <linux/kthread.h>
  67 #include <linux/mutex.h>
  68 #include <linux/freezer.h>
  69 #include <linux/slab.h>
  70
  71 #include <asm/unaligned.h>
  72
  73 #include "usbatm.h"
  74
  75 #define EAGLEUSBVERSION "ueagle 1.4"
  76
  77
  78 /*
  79  * Debug macros
  80  */
  81 #define uea_dbg(usb_dev, format, args...)       \
  82         do { \
  83                 if (debug >= 1) \
  84                         dev_dbg(&(usb_dev)->dev, \
  85                                 "[ueagle-atm dbg] %s: " format, \
  86                                         __func__, ##args); \
  87         } while (0)
  88
  89 #define uea_vdbg(usb_dev, format, args...)      \
  90         do { \
  91                 if (debug >= 2) \
  92                         dev_dbg(&(usb_dev)->dev, \
  93                                 "[ueagle-atm vdbg]  " format, ##args); \
  94         } while (0)
  95
  96 #define uea_enters(usb_dev) \
  97         uea_vdbg(usb_dev, "entering %s\n" , __func__)
  98
  99 #define uea_leaves(usb_dev) \
 100         uea_vdbg(usb_dev, "leaving  %s\n" , __func__)
 101
 102 #define uea_err(usb_dev, format, args...) \
 103         dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args)
 104
 105 #define uea_warn(usb_dev, format, args...) \
 106         dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args)
 107
 108 #define uea_info(usb_dev, format, args...) \
 109         dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args)
 110
 111 struct intr_pkt;
 112
 113 /* cmv's from firmware */
 114 struct uea_cmvs_v1 {
 115         u32 address;
 116         u16 offset;
 117         u32 data;
 118 } __attribute__ ((packed));
 119
 120 struct uea_cmvs_v2 {
 121         u32 group;
 122         u32 address;
 123         u32 offset;
 124         u32 data;
 125 } __attribute__ ((packed));
 126
 127 /* information about currently processed cmv */
 128 struct cmv_dsc_e1 {
 129         u8 function;
 130         u16 idx;
 131         u32 address;
 132         u16 offset;
 133 };
 134
 135 struct cmv_dsc_e4 {
 136         u16 function;
 137         u16 offset;
 138         u16 address;
 139         u16 group;
 140 };
 141
 142 union cmv_dsc {
 143         struct cmv_dsc_e1 e1;
 144         struct cmv_dsc_e4 e4;
 145 };
 146
 147 struct uea_softc {
 148         struct usb_device *usb_dev;
 149         struct usbatm_data *usbatm;
 150
 151         int modem_index;
 152         unsigned int driver_info;
 153         int annex;
 154 #define ANNEXA 0
 155 #define ANNEXB 1
 156
 157         int booting;
 158         int reset;
 159
 160         wait_queue_head_t sync_q;
 161
 162         struct task_struct *kthread;
 163         u32 data;
 164         u32 data1;
 165
 166         int cmv_ack;
 167         union cmv_dsc cmv_dsc;
 168
 169         struct work_struct task;
 170         struct workqueue_struct *work_q;
 171         u16 pageno;
 172         u16 ovl;
 173
 174         const struct firmware *dsp_firm;
 175         struct urb *urb_int;
 176
 177         void (*dispatch_cmv) (struct uea_softc *, struct intr_pkt *);
 178         void (*schedule_load_page) (struct uea_softc *, struct intr_pkt *);
 179         int (*stat) (struct uea_softc *);
 180         int (*send_cmvs) (struct uea_softc *);
 181
 182         /* keep in sync with eaglectl */
 183         struct uea_stats {
 184                 struct {
 185                         u32 state;
 186                         u32 flags;
 187                         u32 mflags;
 188                         u32 vidcpe;
 189                         u32 vidco;
 190                         u32 dsrate;
 191                         u32 usrate;
 192                         u32 dsunc;
 193                         u32 usunc;
 194                         u32 dscorr;
 195                         u32 uscorr;
 196                         u32 txflow;
 197                         u32 rxflow;
 198                         u32 usattenuation;
 199                         u32 dsattenuation;
 200                         u32 dsmargin;
 201                         u32 usmargin;
 202                         u32 firmid;
 203                 } phy;
 204         } stats;
 205 };
 206
 207 /*
 208  * Elsa IDs
 209  */
 210 #define ELSA_VID                0x05CC
 211 #define ELSA_PID_PSTFIRM        0x3350
 212 #define ELSA_PID_PREFIRM        0x3351
 213
 214 #define ELSA_PID_A_PREFIRM      0x3352
 215 #define ELSA_PID_A_PSTFIRM      0x3353
 216 #define ELSA_PID_B_PREFIRM      0x3362
 217 #define ELSA_PID_B_PSTFIRM      0x3363
 218
 219 /*
 220  * Devolo IDs : pots if (pid & 0x10)
 221  */
 222 #define DEVOLO_VID                      0x1039
 223 #define DEVOLO_EAGLE_I_A_PID_PSTFIRM    0x2110
 224 #define DEVOLO_EAGLE_I_A_PID_PREFIRM    0x2111
 225
 226 #define DEVOLO_EAGLE_I_B_PID_PSTFIRM    0x2100
 227 #define DEVOLO_EAGLE_I_B_PID_PREFIRM    0x2101
 228
 229 #define DEVOLO_EAGLE_II_A_PID_PSTFIRM   0x2130
 230 #define DEVOLO_EAGLE_II_A_PID_PREFIRM   0x2131
 231
 232 #define DEVOLO_EAGLE_II_B_PID_PSTFIRM   0x2120
 233 #define DEVOLO_EAGLE_II_B_PID_PREFIRM   0x2121
 234
 235 /*
 236  * Reference design USB IDs
 237  */
 238 #define ANALOG_VID              0x1110
 239 #define ADI930_PID_PREFIRM      0x9001
 240 #define ADI930_PID_PSTFIRM      0x9000
 241
 242 #define EAGLE_I_PID_PREFIRM     0x9010  /* Eagle I */
 243 #define EAGLE_I_PID_PSTFIRM     0x900F  /* Eagle I */
 244
 245 #define EAGLE_IIC_PID_PREFIRM   0x9024  /* Eagle IIC */
 246 #define EAGLE_IIC_PID_PSTFIRM   0x9023  /* Eagle IIC */
 247
 248 #define EAGLE_II_PID_PREFIRM    0x9022  /* Eagle II */
 249 #define EAGLE_II_PID_PSTFIRM    0x9021  /* Eagle II */
 250
 251 #define EAGLE_III_PID_PREFIRM   0x9032  /* Eagle III */
 252 #define EAGLE_III_PID_PSTFIRM   0x9031  /* Eagle III */
 253
 254 #define EAGLE_IV_PID_PREFIRM    0x9042  /* Eagle IV */
 255 #define EAGLE_IV_PID_PSTFIRM    0x9041  /* Eagle IV */
 256
 257 /*
 258  * USR USB IDs
 259  */
 260 #define USR_VID                 0x0BAF
 261 #define MILLER_A_PID_PREFIRM    0x00F2
 262 #define MILLER_A_PID_PSTFIRM    0x00F1
 263 #define MILLER_B_PID_PREFIRM    0x00FA
 264 #define MILLER_B_PID_PSTFIRM    0x00F9
 265 #define HEINEKEN_A_PID_PREFIRM  0x00F6
 266 #define HEINEKEN_A_PID_PSTFIRM  0x00F5
 267 #define HEINEKEN_B_PID_PREFIRM  0x00F8
 268 #define HEINEKEN_B_PID_PSTFIRM  0x00F7
 269
 270 #define PREFIRM 0
 271 #define PSTFIRM (1<<7)
 272 #define AUTO_ANNEX_A (1<<8)
 273 #define AUTO_ANNEX_B (1<<9)
 274
 275 enum {
 276         ADI930 = 0,
 277         EAGLE_I,
 278         EAGLE_II,
 279         EAGLE_III,
 280         EAGLE_IV
 281 };
 282
 283 /* macros for both struct usb_device_id and struct uea_softc */
 284 #define UEA_IS_PREFIRM(x) \
 285         (!((x)->driver_info & PSTFIRM))
 286 #define UEA_CHIP_VERSION(x) \
 287         ((x)->driver_info & 0xf)
 288
 289 #define IS_ISDN(x) \
 290         ((x)->annex & ANNEXB)
 291
 292 #define INS_TO_USBDEV(ins) (ins->usb_dev)
 293
 294 #define GET_STATUS(data) \
 295         ((data >> 8) & 0xf)
 296
 297 #define IS_OPERATIONAL(sc) \
 298         ((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \
 299         (GET_STATUS(sc->stats.phy.state) == 2) : \
 300         (sc->stats.phy.state == 7))
 301
 302 /*
 303  * Set of macros to handle unaligned data in the firmware blob.
 304  * The FW_GET_BYTE() macro is provided only for consistency.
 305  */
 306
 307 #define FW_GET_BYTE(p) (*((__u8 *) (p)))
 308
 309 #define FW_DIR "ueagle-atm/"
 310 #define UEA_FW_NAME_MAX 30
 311 #define NB_MODEM 4
 312
 313 #define BULK_TIMEOUT 300
 314 #define CTRL_TIMEOUT 1000
 315
 316 #define ACK_TIMEOUT msecs_to_jiffies(3000)
 317
 318 #define UEA_INTR_IFACE_NO       0
 319 #define UEA_US_IFACE_NO         1
 320 #define UEA_DS_IFACE_NO         2
 321
 322 #define FASTEST_ISO_INTF        8
 323
 324 #define UEA_BULK_DATA_PIPE      0x02
 325 #define UEA_IDMA_PIPE           0x04
 326 #define UEA_INTR_PIPE           0x04
 327 #define UEA_ISO_DATA_PIPE       0x08
 328
 329 #define UEA_E1_SET_BLOCK        0x0001
 330 #define UEA_E4_SET_BLOCK        0x002c
 331 #define UEA_SET_MODE            0x0003
 332 #define UEA_SET_2183_DATA       0x0004
 333 #define UEA_SET_TIMEOUT         0x0011
 334
 335 #define UEA_LOOPBACK_OFF        0x0002
 336 #define UEA_LOOPBACK_ON         0x0003
 337 #define UEA_BOOT_IDMA           0x0006
 338 #define UEA_START_RESET         0x0007
 339 #define UEA_END_RESET           0x0008
 340
 341 #define UEA_SWAP_MAILBOX        (0x3fcd | 0x4000)
 342 #define UEA_MPTX_START          (0x3fce | 0x4000)
 343 #define UEA_MPTX_MAILBOX        (0x3fd6 | 0x4000)
 344 #define UEA_MPRX_MAILBOX        (0x3fdf | 0x4000)
 345
 346 /* block information in eagle4 dsp firmware  */
 347 struct block_index {
 348         __le32 PageOffset;
 349         __le32 NotLastBlock;
 350         __le32 dummy;
 351         __le32 PageSize;
 352         __le32 PageAddress;
 353         __le16 dummy1;
 354         __le16 PageNumber;
 355 } __attribute__ ((packed));
 356
 357 #define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
 358 #define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
 359
 360 #define E4_L1_STRING_HEADER 0x10
 361 #define E4_MAX_PAGE_NUMBER 0x58
 362 #define E4_NO_SWAPPAGE_HEADERS 0x31
 363
 364 /* l1_code is eagle4 dsp firmware format */
 365 struct l1_code {
 366         u8 string_header[E4_L1_STRING_HEADER];
 367         u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
 368         struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
 369         u8 code[0];
 370 } __attribute__ ((packed));
 371
 372 /* structures describing a block within a DSP page */
 373 struct block_info_e1 {
 374         __le16 wHdr;
 375         __le16 wAddress;
 376         __le16 wSize;
 377         __le16 wOvlOffset;
 378         __le16 wOvl;            /* overlay */
 379         __le16 wLast;
 380 } __attribute__ ((packed));
 381 #define E1_BLOCK_INFO_SIZE 12
 382
 383 struct block_info_e4 {
 384         __be16 wHdr;
 385         __u8 bBootPage;
 386         __u8 bPageNumber;
 387         __be32 dwSize;
 388         __be32 dwAddress;
 389         __be16 wReserved;
 390 } __attribute__ ((packed));
 391 #define E4_BLOCK_INFO_SIZE 14
 392
 393 #define UEA_BIHDR 0xabcd
 394 #define UEA_RESERVED 0xffff
 395
 396 /* constants describing cmv type */
 397 #define E1_PREAMBLE 0x535c
 398 #define E1_MODEMTOHOST 0x01
 399 #define E1_HOSTTOMODEM 0x10
 400
 401 #define E1_MEMACCESS 0x1
 402 #define E1_ADSLDIRECTIVE 0x7
 403 #define E1_FUNCTION_TYPE(f) ((f) >> 4)
 404 #define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f)
 405
 406 #define E4_MEMACCESS 0
 407 #define E4_ADSLDIRECTIVE 0xf
 408 #define E4_FUNCTION_TYPE(f) ((f) >> 8)
 409 #define E4_FUNCTION_SIZE(f) ((f) & 0x0f)
 410 #define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f)
 411
 412 /* for MEMACCESS */
 413 #define E1_REQUESTREAD  0x0
 414 #define E1_REQUESTWRITE 0x1
 415 #define E1_REPLYREAD    0x2
 416 #define E1_REPLYWRITE   0x3
 417
 418 #define E4_REQUESTREAD  0x0
 419 #define E4_REQUESTWRITE 0x4
 420 #define E4_REPLYREAD    (E4_REQUESTREAD | 1)
 421 #define E4_REPLYWRITE   (E4_REQUESTWRITE | 1)
 422
 423 /* for ADSLDIRECTIVE */
 424 #define E1_KERNELREADY 0x0
 425 #define E1_MODEMREADY  0x1
 426
 427 #define E4_KERNELREADY 0x0
 428 #define E4_MODEMREADY  0x1
 429
 430 #define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
 431 #define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \
 432         ((st) & 0xf) << 4 | ((s) & 0xf))
 433
 434 #define E1_MAKESA(a, b, c, d)                                           \
 435         (((c) & 0xff) << 24 |                                           \
 436          ((d) & 0xff) << 16 |                                           \
 437          ((a) & 0xff) << 8  |                                           \
 438          ((b) & 0xff))
 439
 440 #define E1_GETSA1(a) ((a >> 8) & 0xff)
 441 #define E1_GETSA2(a) (a & 0xff)
 442 #define E1_GETSA3(a) ((a >> 24) & 0xff)
 443 #define E1_GETSA4(a) ((a >> 16) & 0xff)
 444
 445 #define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L')
 446 #define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G')
 447 #define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O')
 448 #define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N')
 449 #define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E')
 450 #define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T')
 451
 452 #define E4_SA_CNTL 1
 453 #define E4_SA_STAT 2
 454 #define E4_SA_INFO 3
 455 #define E4_SA_TEST 4
 456 #define E4_SA_OPTN 5
 457 #define E4_SA_RATE 6
 458 #define E4_SA_DIAG 7
 459 #define E4_SA_CNFG 8
 460
 461 /* structures representing a CMV (Configuration and Management Variable) */
 462 struct cmv_e1 {
 463         __le16 wPreamble;
 464         __u8 bDirection;
 465         __u8 bFunction;
 466         __le16 wIndex;
 467         __le32 dwSymbolicAddress;
 468         __le16 wOffsetAddress;
 469         __le32 dwData;
 470 } __attribute__ ((packed));
 471
 472 struct cmv_e4 {
 473         __be16 wGroup;
 474         __be16 wFunction;
 475         __be16 wOffset;
 476         __be16 wAddress;
 477         __be32 dwData[6];
 478 } __attribute__ ((packed));
 479
 480 /* structures representing swap information */
 481 struct swap_info_e1 {
 482         __u8 bSwapPageNo;
 483         __u8 bOvl;              /* overlay */
 484 } __attribute__ ((packed));
 485
 486 struct swap_info_e4 {
 487         __u8 bSwapPageNo;
 488 } __attribute__ ((packed));
 489
 490 /* structures representing interrupt data */
 491 #define e1_bSwapPageNo  u.e1.s1.swapinfo.bSwapPageNo
 492 #define e1_bOvl         u.e1.s1.swapinfo.bOvl
 493 #define e4_bSwapPageNo  u.e4.s1.swapinfo.bSwapPageNo
 494
 495 #define INT_LOADSWAPPAGE 0x0001
 496 #define INT_INCOMINGCMV  0x0002
 497
 498 union intr_data_e1 {
 499         struct {
 500                 struct swap_info_e1 swapinfo;
 501                 __le16 wDataSize;
 502         } __attribute__ ((packed)) s1;
 503         struct {
 504                 struct cmv_e1 cmv;
 505                 __le16 wDataSize;
 506         } __attribute__ ((packed)) s2;
 507 } __attribute__ ((packed));
 508
 509 union intr_data_e4 {
 510         struct {
 511                 struct swap_info_e4 swapinfo;
 512                 __le16 wDataSize;
 513         } __attribute__ ((packed)) s1;
 514         struct {
 515                 struct cmv_e4 cmv;
 516                 __le16 wDataSize;
 517         } __attribute__ ((packed)) s2;
 518 } __attribute__ ((packed));
 519
 520 struct intr_pkt {
 521         __u8 bType;
 522         __u8 bNotification;
 523         __le16 wValue;
 524         __le16 wIndex;
 525         __le16 wLength;
 526         __le16 wInterrupt;
 527         union {
 528                 union intr_data_e1 e1;
 529                 union intr_data_e4 e4;
 530         } u;
 531 } __attribute__ ((packed));
 532
 533 #define E1_INTR_PKT_SIZE 28
 534 #define E4_INTR_PKT_SIZE 64
 535
 536 static struct usb_driver uea_driver;
 537 static DEFINE_MUTEX(uea_mutex);
 538 static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III",
 539                                                                 "Eagle IV"};
 540
 541 static int modem_index;
 542 static unsigned int debug;
 543 static unsigned int altsetting[NB_MODEM] = {
 544                                 [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
 545 static int sync_wait[NB_MODEM];
 546 static char *cmv_file[NB_MODEM];
 547 static int annex[NB_MODEM];
 548
 549 module_param(debug, uint, 0644);
 550 MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
 551 module_param_array(altsetting, uint, NULL, 0644);
 552 MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, "
 553                              "1=isoc slowest, ... , 8=isoc fastest (default)");
 554 module_param_array(sync_wait, bool, NULL, 0644);
 555 MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
 556 module_param_array(cmv_file, charp, NULL, 0644);
 557 MODULE_PARM_DESC(cmv_file,
 558                 "file name with configuration and management variables");
 559 module_param_array(annex, uint, NULL, 0644);
 560 MODULE_PARM_DESC(annex,
 561                 "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
 562
 563 #define uea_wait(sc, cond, timeo) \
 564 ({ \
 565         int _r = wait_event_interruptible_timeout(sc->sync_q, \
 566                         (cond) || kthread_should_stop(), timeo); \
 567         if (kthread_should_stop()) \
 568                 _r = -ENODEV; \
 569         _r; \
 570 })
 571
 572 #define UPDATE_ATM_STAT(type, val) \
 573         do { \
 574                 if (sc->usbatm->atm_dev) \
 575                         sc->usbatm->atm_dev->type = val; \
 576         } while (0)
 577
 578 #define UPDATE_ATM_SIGNAL(val) \
 579         do { \
 580                 if (sc->usbatm->atm_dev) \
 581                         atm_dev_signal_change(sc->usbatm->atm_dev, val); \
 582         } while (0)
 583
 584
 585 /* Firmware loading */
 586 #define LOAD_INTERNAL     0xA0
 587 #define F8051_USBCS       0x7f92
 588
 589 /**
 590  * uea_send_modem_cmd - Send a command for pre-firmware devices.
 591  */
 592 static int uea_send_modem_cmd(struct usb_device *usb,
 593                               u16 addr, u16 size, const u8 *buff)
 594 {
 595         int ret = -ENOMEM;
 596         u8 *xfer_buff;
 597
 598         xfer_buff = kmemdup(buff, size, GFP_KERNEL);
 599         if (xfer_buff) {
 600                 ret = usb_control_msg(usb,
 601                                       usb_sndctrlpipe(usb, 0),
 602                                       LOAD_INTERNAL,
 603                                       USB_DIR_OUT | USB_TYPE_VENDOR |
 604                                       USB_RECIP_DEVICE, addr, 0, xfer_buff,
 605                                       size, CTRL_TIMEOUT);
 606                 kfree(xfer_buff);
 607         }
 608
 609         if (ret < 0)
 610                 return ret;
 611
 612         return (ret == size) ? 0 : -EIO;
 613 }
 614
 615 static void uea_upload_pre_firmware(const struct firmware *fw_entry,
 616                                                                 void *context)
 617 {
 618         struct usb_device *usb = context;
 619         const u8 *pfw;
 620         u8 value;
 621         u32 crc = 0;
 622         int ret, size;
 623
 624         uea_enters(usb);
 625         if (!fw_entry) {
 626                 uea_err(usb, "firmware is not available\n");
 627                 goto err;
 628         }
 629
 630         pfw = fw_entry->data;
 631         size = fw_entry->size;
 632         if (size < 4)
 633                 goto err_fw_corrupted;
 634
 635         crc = get_unaligned_le32(pfw);
 636         pfw += 4;
 637         size -= 4;
 638         if (crc32_be(0, pfw, size) != crc)
 639                 goto err_fw_corrupted;
 640
 641         /*
 642          * Start to upload firmware : send reset
 643          */
 644         value = 1;
 645         ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
 646
 647         if (ret < 0) {
 648                 uea_err(usb, "modem reset failed with error %d\n", ret);
 649                 goto err;
 650         }
 651
 652         while (size > 3) {
 653                 u8 len = FW_GET_BYTE(pfw);
 654                 u16 add = get_unaligned_le16(pfw + 1);
 655
 656                 size -= len + 3;
 657                 if (size < 0)
 658                         goto err_fw_corrupted;
 659
 660                 ret = uea_send_modem_cmd(usb, add, len, pfw + 3);
 661                 if (ret < 0) {
 662                         uea_err(usb, "uploading firmware data failed "
 663                                         "with error %d\n", ret);
 664                         goto err;
 665                 }
 666                 pfw += len + 3;
 667         }
 668
 669         if (size != 0)
 670                 goto err_fw_corrupted;
 671
 672         /*
 673          * Tell the modem we finish : de-assert reset
 674          */
 675         value = 0;
 676         ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value);
 677         if (ret < 0)
 678                 uea_err(usb, "modem de-assert failed with error %d\n", ret);
 679         else
 680                 uea_info(usb, "firmware uploaded\n");
 681
 682         goto err;
 683
 684 err_fw_corrupted:
 685         uea_err(usb, "firmware is corrupted\n");
 686 err:
 687         release_firmware(fw_entry);
 688         uea_leaves(usb);
 689 }
 690
 691 /**
 692  * uea_load_firmware - Load usb firmware for pre-firmware devices.
 693  */
 694 static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
 695 {
 696         int ret;
 697         char *fw_name = FW_DIR "eagle.fw";
 698
 699         uea_enters(usb);
 700         uea_info(usb, "pre-firmware device, uploading firmware\n");
 701
 702         switch (ver) {
 703         case ADI930:
 704                 fw_name = FW_DIR "adi930.fw";
 705                 break;
 706         case EAGLE_I:
 707                 fw_name = FW_DIR "eagleI.fw";
 708                 break;
 709         case EAGLE_II:
 710                 fw_name = FW_DIR "eagleII.fw";
 711                 break;
 712         case EAGLE_III:
 713                 fw_name = FW_DIR "eagleIII.fw";
 714                 break;
 715         case EAGLE_IV:
 716                 fw_name = FW_DIR "eagleIV.fw";
 717                 break;
 718         }
 719
 720         ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev,
 721                                         GFP_KERNEL, usb,
 722                                         uea_upload_pre_firmware);
 723         if (ret)
 724                 uea_err(usb, "firmware %s is not available\n", fw_name);
 725         else
 726                 uea_info(usb, "loading firmware %s\n", fw_name);
 727
 728         uea_leaves(usb);
 729         return ret;
 730 }
 731
 732 /* modem management : dsp firmware, send/read CMV, monitoring statistic
 733  */
 734
 735 /*
 736  * Make sure that the DSP code provided is safe to use.
 737  */
 738 static int check_dsp_e1(const u8 *dsp, unsigned int len)
 739 {
 740         u8 pagecount, blockcount;
 741         u16 blocksize;
 742         u32 pageoffset;
 743         unsigned int i, j, p, pp;
 744
 745         pagecount = FW_GET_BYTE(dsp);
 746         p = 1;
 747
 748         /* enough space for page offsets? */
 749         if (p + 4 * pagecount > len)
 750                 return 1;
 751
 752         for (i = 0; i < pagecount; i++) {
 753
 754                 pageoffset = get_unaligned_le32(dsp + p);
 755                 p += 4;
 756
 757                 if (pageoffset == 0)
 758                         continue;
 759
 760                 /* enough space for blockcount? */
 761                 if (pageoffset >= len)
 762                         return 1;
 763
 764                 pp = pageoffset;
 765                 blockcount = FW_GET_BYTE(dsp + pp);
 766                 pp += 1;
 767
 768                 for (j = 0; j < blockcount; j++) {
 769
 770                         /* enough space for block header? */
 771                         if (pp + 4 > len)
 772                                 return 1;
 773
 774                         pp += 2;        /* skip blockaddr */
 775                         blocksize = get_unaligned_le16(dsp + pp);
 776                         pp += 2;
 777
 778                         /* enough space for block data? */
 779                         if (pp + blocksize > len)
 780                                 return 1;
 781
 782                         pp += blocksize;
 783                 }
 784         }
 785
 786         return 0;
 787 }
 788
 789 static int check_dsp_e4(const u8 *dsp, int len)
 790 {
 791         int i;
 792         struct l1_code *p = (struct l1_code *) dsp;
 793         unsigned int sum = p->code - dsp;
 794
 795         if (len < sum)
 796                 return 1;
 797
 798         if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 &&
 799             strcmp("STRATIPHY ANEXB", p->string_header) != 0)
 800                 return 1;
 801
 802         for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) {
 803                 struct block_index *blockidx;
 804                 u8 blockno = p->page_number_to_block_index[i];
 805                 if (blockno >= E4_NO_SWAPPAGE_HEADERS)
 806                         continue;
 807
 808                 do {
 809                         u64 l;
 810
 811                         if (blockno >= E4_NO_SWAPPAGE_HEADERS)
 812                                 return 1;
 813
 814                         blockidx = &p->page_header[blockno++];
 815                         if ((u8 *)(blockidx + 1) - dsp  >= len)
 816                                 return 1;
 817
 818                         if (le16_to_cpu(blockidx->PageNumber) != i)
 819                                 return 1;
 820
 821                         l = E4_PAGE_BYTES(blockidx->PageSize);
 822                         sum += l;
 823                         l += le32_to_cpu(blockidx->PageOffset);
 824                         if (l > len)
 825                                 return 1;
 826
 827                 /* zero is zero regardless endianes */
 828                 } while (blockidx->NotLastBlock);
 829         }
 830
 831         return (sum == len) ? 0 : 1;
 832 }
 833
 834 /*
 835  * send data to the idma pipe
 836  * */
 837 static int uea_idma_write(struct uea_softc *sc, const void *data, u32 size)
 838 {
 839         int ret = -ENOMEM;
 840         u8 *xfer_buff;
 841         int bytes_read;
 842
 843         xfer_buff = kmemdup(data, size, GFP_KERNEL);
 844         if (!xfer_buff) {
 845                 uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
 846                 return ret;
 847         }
 848
 849         ret = usb_bulk_msg(sc->usb_dev,
 850                          usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
 851                          xfer_buff, size, &bytes_read, BULK_TIMEOUT);
 852
 853         kfree(xfer_buff);
 854         if (ret < 0)
 855                 return ret;
 856         if (size != bytes_read) {
 857                 uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size,
 858                        bytes_read);
 859                 return -EIO;
 860         }
 861
 862         return 0;
 863 }
 864
 865 static int request_dsp(struct uea_softc *sc)
 866 {
 867         int ret;
 868         char *dsp_name;
 869
 870         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
 871                 if (IS_ISDN(sc))
 872                         dsp_name = FW_DIR "DSP4i.bin";
 873                 else
 874                         dsp_name = FW_DIR "DSP4p.bin";
 875         } else if (UEA_CHIP_VERSION(sc) == ADI930) {
 876                 if (IS_ISDN(sc))
 877                         dsp_name = FW_DIR "DSP9i.bin";
 878                 else
 879                         dsp_name = FW_DIR "DSP9p.bin";
 880         } else {
 881                 if (IS_ISDN(sc))
 882                         dsp_name = FW_DIR "DSPei.bin";
 883                 else
 884                         dsp_name = FW_DIR "DSPep.bin";
 885         }
 886
 887         ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
 888         if (ret < 0) {
 889                 uea_err(INS_TO_USBDEV(sc),
 890                        "requesting firmware %s failed with error %d\n",
 891                         dsp_name, ret);
 892                 return ret;
 893         }
 894
 895         if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
 896                 ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size);
 897         else
 898                 ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size);
 899
 900         if (ret) {
 901                 uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
 902                        dsp_name);
 903                 release_firmware(sc->dsp_firm);
 904                 sc->dsp_firm = NULL;
 905                 return -EILSEQ;
 906         }
 907
 908         return 0;
 909 }
 910
 911 /*
 912  * The uea_load_page() function must be called within a process context
 913  */
 914 static void uea_load_page_e1(struct work_struct *work)
 915 {
 916         struct uea_softc *sc = container_of(work, struct uea_softc, task);
 917         u16 pageno = sc->pageno;
 918         u16 ovl = sc->ovl;
 919         struct block_info_e1 bi;
 920
 921         const u8 *p;
 922         u8 pagecount, blockcount;
 923         u16 blockaddr, blocksize;
 924         u32 pageoffset;
 925         int i;
 926
 927         /* reload firmware when reboot start and it's loaded already */
 928         if (ovl == 0 && pageno == 0 && sc->dsp_firm) {
 929                 release_firmware(sc->dsp_firm);
 930                 sc->dsp_firm = NULL;
 931         }
 932
 933         if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
 934                 return;
 935
 936         p = sc->dsp_firm->data;
 937         pagecount = FW_GET_BYTE(p);
 938         p += 1;
 939
 940         if (pageno >= pagecount)
 941                 goto bad1;
 942
 943         p += 4 * pageno;
 944         pageoffset = get_unaligned_le32(p);
 945
 946         if (pageoffset == 0)
 947                 goto bad1;
 948
 949         p = sc->dsp_firm->data + pageoffset;
 950         blockcount = FW_GET_BYTE(p);
 951         p += 1;
 952
 953         uea_dbg(INS_TO_USBDEV(sc),
 954                "sending %u blocks for DSP page %u\n", blockcount, pageno);
 955
 956         bi.wHdr = cpu_to_le16(UEA_BIHDR);
 957         bi.wOvl = cpu_to_le16(ovl);
 958         bi.wOvlOffset = cpu_to_le16(ovl | 0x8000);
 959
 960         for (i = 0; i < blockcount; i++) {
 961                 blockaddr = get_unaligned_le16(p);
 962                 p += 2;
 963
 964                 blocksize = get_unaligned_le16(p);
 965                 p += 2;
 966
 967                 bi.wSize = cpu_to_le16(blocksize);
 968                 bi.wAddress = cpu_to_le16(blockaddr);
 969                 bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
 970
 971                 /* send block info through the IDMA pipe */
 972                 if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE))
 973                         goto bad2;
 974
 975                 /* send block data through the IDMA pipe */
 976                 if (uea_idma_write(sc, p, blocksize))
 977                         goto bad2;
 978
 979                 p += blocksize;
 980         }
 981
 982         return;
 983
 984 bad2:
 985         uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
 986         return;
 987 bad1:
 988         uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
 989 }
 990
 991 static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
 992 {
 993         struct block_info_e4 bi;
 994         struct block_index *blockidx;
 995         struct l1_code *p = (struct l1_code *) sc->dsp_firm->data;
 996         u8 blockno = p->page_number_to_block_index[pageno];
 997
 998         bi.wHdr = cpu_to_be16(UEA_BIHDR);
 999         bi.bBootPage = boot;
1000         bi.bPageNumber = pageno;
1001         bi.wReserved = cpu_to_be16(UEA_RESERVED);
1002
1003         do {
1004                 const u8 *blockoffset;
1005                 unsigned int blocksize;
1006
1007                 blockidx = &p->page_header[blockno];
1008                 blocksize = E4_PAGE_BYTES(blockidx->PageSize);
1009                 blockoffset = sc->dsp_firm->data + le32_to_cpu(
1010                                                         blockidx->PageOffset);
1011
1012                 bi.dwSize = cpu_to_be32(blocksize);
1013                 bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress));
1014
1015                 uea_dbg(INS_TO_USBDEV(sc),
1016                         "sending block %u for DSP page "
1017                         "%u size %u address %x\n",
1018                         blockno, pageno, blocksize,
1019                         le32_to_cpu(blockidx->PageAddress));
1020
1021                 /* send block info through the IDMA pipe */
1022                 if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
1023                         goto bad;
1024
1025                 /* send block data through the IDMA pipe */
1026                 if (uea_idma_write(sc, blockoffset, blocksize))
1027                         goto bad;
1028
1029                 blockno++;
1030         } while (blockidx->NotLastBlock);
1031
1032         return;
1033
1034 bad:
1035         uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno);
1036         return;
1037 }
1038
1039 static void uea_load_page_e4(struct work_struct *work)
1040 {
1041         struct uea_softc *sc = container_of(work, struct uea_softc, task);
1042         u8 pageno = sc->pageno;
1043         int i;
1044         struct block_info_e4 bi;
1045         struct l1_code *p;
1046
1047         uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
1048
1049         /* reload firmware when reboot start and it's loaded already */
1050         if (pageno == 0 && sc->dsp_firm) {
1051                 release_firmware(sc->dsp_firm);
1052                 sc->dsp_firm = NULL;
1053         }
1054
1055         if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
1056                 return;
1057
1058         p = (struct l1_code *) sc->dsp_firm->data;
1059         if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) {
1060                 uea_err(INS_TO_USBDEV(sc), "invalid DSP "
1061                                                 "page %u requested\n", pageno);
1062                 return;
1063         }
1064
1065         if (pageno != 0) {
1066                 __uea_load_page_e4(sc, pageno, 0);
1067                 return;
1068         }
1069
1070         uea_dbg(INS_TO_USBDEV(sc),
1071                "sending Main DSP page %u\n", p->page_header[0].PageNumber);
1072
1073         for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) {
1074                 if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize))
1075                         __uea_load_page_e4(sc, i, 1);
1076         }
1077
1078         uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n");
1079
1080         bi.wHdr = cpu_to_be16(UEA_BIHDR);
1081         bi.bBootPage = 0;
1082         bi.bPageNumber = 0xff;
1083         bi.wReserved = cpu_to_be16(UEA_RESERVED);
1084         bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize));
1085         bi.dwAddress = cpu_to_be32(le32_to_cpu(p->page_header[0].PageAddress));
1086
1087         /* send block info through the IDMA pipe */
1088         if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
1089                 uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n");
1090 }
1091
1092 static inline void wake_up_cmv_ack(struct uea_softc *sc)
1093 {
1094         BUG_ON(sc->cmv_ack);
1095         sc->cmv_ack = 1;
1096         wake_up(&sc->sync_q);
1097 }
1098
1099 static inline int wait_cmv_ack(struct uea_softc *sc)
1100 {
1101         int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT);
1102
1103         sc->cmv_ack = 0;
1104
1105         uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
1106                         jiffies_to_msecs(ret));
1107
1108         if (ret < 0)
1109                 return ret;
1110
1111         return (ret == 0) ? -ETIMEDOUT : 0;
1112 }
1113
1114 #define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
1115
1116 static int uea_request(struct uea_softc *sc,
1117                 u16 value, u16 index, u16 size, const void *data)
1118 {
1119         u8 *xfer_buff;
1120         int ret = -ENOMEM;
1121
1122         xfer_buff = kmemdup(data, size, GFP_KERNEL);
1123         if (!xfer_buff) {
1124                 uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
1125                 return ret;
1126         }
1127
1128         ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
1129                               UCDC_SEND_ENCAPSULATED_COMMAND,
1130                               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1131                               value, index, xfer_buff, size, CTRL_TIMEOUT);
1132
1133         kfree(xfer_buff);
1134         if (ret < 0) {
1135                 uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret);
1136                 return ret;
1137         }
1138
1139         if (ret != size) {
1140                 uea_err(INS_TO_USBDEV(sc),
1141                        "usb_control_msg send only %d bytes (instead of %d)\n",
1142                        ret, size);
1143                 return -EIO;
1144         }
1145
1146         return 0;
1147 }
1148
1149 static int uea_cmv_e1(struct uea_softc *sc,
1150                 u8 function, u32 address, u16 offset, u32 data)
1151 {
1152         struct cmv_e1 cmv;
1153         int ret;
1154
1155         uea_enters(INS_TO_USBDEV(sc));
1156         uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
1157                         "offset : 0x%04x, data : 0x%08x\n",
1158                         E1_FUNCTION_TYPE(function),
1159                         E1_FUNCTION_SUBTYPE(function),
1160                         E1_GETSA1(address), E1_GETSA2(address),
1161                         E1_GETSA3(address),
1162                         E1_GETSA4(address), offset, data);
1163
1164         /* we send a request, but we expect a reply */
1165         sc->cmv_dsc.e1.function = function | 0x2;
1166         sc->cmv_dsc.e1.idx++;
1167         sc->cmv_dsc.e1.address = address;
1168         sc->cmv_dsc.e1.offset = offset;
1169
1170         cmv.wPreamble = cpu_to_le16(E1_PREAMBLE);
1171         cmv.bDirection = E1_HOSTTOMODEM;
1172         cmv.bFunction = function;
1173         cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx);
1174         put_unaligned_le32(address, &cmv.dwSymbolicAddress);
1175         cmv.wOffsetAddress = cpu_to_le16(offset);
1176         put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData);
1177
1178         ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START,
1179                                                         sizeof(cmv), &cmv);
1180         if (ret < 0)
1181                 return ret;
1182         ret = wait_cmv_ack(sc);
1183         uea_leaves(INS_TO_USBDEV(sc));
1184         return ret;
1185 }
1186
1187 static int uea_cmv_e4(struct uea_softc *sc,
1188                 u16 function, u16 group, u16 address, u16 offset, u32 data)
1189 {
1190         struct cmv_e4 cmv;
1191         int ret;
1192
1193         uea_enters(INS_TO_USBDEV(sc));
1194         memset(&cmv, 0, sizeof(cmv));
1195
1196         uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, "
1197                  "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n",
1198                  E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function),
1199                  group, address, offset, data);
1200
1201         /* we send a request, but we expect a reply */
1202         sc->cmv_dsc.e4.function = function | (0x1 << 4);
1203         sc->cmv_dsc.e4.offset = offset;
1204         sc->cmv_dsc.e4.address = address;
1205         sc->cmv_dsc.e4.group = group;
1206
1207         cmv.wFunction = cpu_to_be16(function);
1208         cmv.wGroup = cpu_to_be16(group);
1209         cmv.wAddress = cpu_to_be16(address);
1210         cmv.wOffset = cpu_to_be16(offset);
1211         cmv.dwData[0] = cpu_to_be32(data);
1212
1213         ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START,
1214                                                         sizeof(cmv), &cmv);
1215         if (ret < 0)
1216                 return ret;
1217         ret = wait_cmv_ack(sc);
1218         uea_leaves(INS_TO_USBDEV(sc));
1219         return ret;
1220 }
1221
1222 static inline int uea_read_cmv_e1(struct uea_softc *sc,
1223                 u32 address, u16 offset, u32 *data)
1224 {
1225         int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD),
1226                           address, offset, 0);
1227         if (ret < 0)
1228                 uea_err(INS_TO_USBDEV(sc),
1229                         "reading cmv failed with error %d\n", ret);
1230         else
1231                 *data = sc->data;
1232
1233         return ret;
1234 }
1235
1236 static inline int uea_read_cmv_e4(struct uea_softc *sc,
1237                 u8 size, u16 group, u16 address, u16 offset, u32 *data)
1238 {
1239         int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
1240                                                         E4_REQUESTREAD, size),
1241                           group, address, offset, 0);
1242         if (ret < 0)
1243                 uea_err(INS_TO_USBDEV(sc),
1244                         "reading cmv failed with error %d\n", ret);
1245         else {
1246                 *data = sc->data;
1247                 /* size is in 16-bit word quantities */
1248                 if (size > 2)
1249                         *(data + 1) = sc->data1;
1250         }
1251         return ret;
1252 }
1253
1254 static inline int uea_write_cmv_e1(struct uea_softc *sc,
1255                 u32 address, u16 offset, u32 data)
1256 {
1257         int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE),
1258                           address, offset, data);
1259         if (ret < 0)
1260                 uea_err(INS_TO_USBDEV(sc),
1261                         "writing cmv failed with error %d\n", ret);
1262
1263         return ret;
1264 }
1265
1266 static inline int uea_write_cmv_e4(struct uea_softc *sc,
1267                 u8 size, u16 group, u16 address, u16 offset, u32 data)
1268 {
1269         int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
1270                                                         E4_REQUESTWRITE, size),
1271                           group, address, offset, data);
1272         if (ret < 0)
1273                 uea_err(INS_TO_USBDEV(sc),
1274                         "writing cmv failed with error %d\n", ret);
1275
1276         return ret;
1277 }
1278
1279 static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
1280 {
1281         int ret;
1282         u16 timeout;
1283
1284         /* in bulk mode the modem have problem with high rate
1285          * changing internal timing could improve things, but the
1286          * value is misterious.
1287          * ADI930 don't support it (-EPIPE error).
1288          */
1289
1290         if (UEA_CHIP_VERSION(sc) == ADI930 ||
1291             altsetting[sc->modem_index] > 0 ||
1292             sc->stats.phy.dsrate == dsrate)
1293                 return;
1294
1295         /* Original timming (1Mbit/s) from ADI (used in windows driver) */
1296         timeout = (dsrate <= 1024*1024) ? 0 : 1;
1297         ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
1298         uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n",
1299                  timeout,  ret < 0 ? " failed" : "");
1300
1301 }
1302
1303 /*
1304  * Monitor the modem and update the stat
1305  * return 0 if everything is ok
1306  * return < 0 if an error occurs (-EAGAIN reboot needed)
1307  */
1308 static int uea_stat_e1(struct uea_softc *sc)
1309 {
1310         u32 data;
1311         int ret;
1312
1313         uea_enters(INS_TO_USBDEV(sc));
1314         data = sc->stats.phy.state;
1315
1316         ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state);
1317         if (ret < 0)
1318                 return ret;
1319
1320         switch (GET_STATUS(sc->stats.phy.state)) {
1321         case 0:         /* not yet synchronized */
1322                 uea_dbg(INS_TO_USBDEV(sc),
1323                        "modem not yet synchronized\n");
1324                 return 0;
1325
1326         case 1:         /* initialization */
1327                 uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
1328                 return 0;
1329
1330         case 2:         /* operational */
1331                 uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n");
1332                 break;
1333
1334         case 3:         /* fail ... */
1335                 uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
1336                                         " (may be try other cmv/dsp)\n");
1337                 return -EAGAIN;
1338
1339         case 4 ... 6:   /* test state */
1340                 uea_warn(INS_TO_USBDEV(sc),
1341                                 "modem in test mode - not supported\n");
1342                 return -EAGAIN;
1343
1344         case 7:         /* fast-retain ... */
1345                 uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n");
1346                 return 0;
1347         default:
1348                 uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n",
1349                         GET_STATUS(sc->stats.phy.state));
1350                 return -EAGAIN;
1351         }
1352
1353         if (GET_STATUS(data) != 2) {
1354                 uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
1355                 uea_info(INS_TO_USBDEV(sc), "modem operational\n");
1356
1357                 /* release the dsp firmware as it is not needed until
1358                  * the next failure
1359                  */
1360                 if (sc->dsp_firm) {
1361                         release_firmware(sc->dsp_firm);
1362                         sc->dsp_firm = NULL;
1363                 }
1364         }
1365
1366         /* always update it as atm layer could not be init when we switch to
1367          * operational state
1368          */
1369         UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
1370
1371         /* wake up processes waiting for synchronization */
1372         wake_up(&sc->sync_q);
1373
1374         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags);
1375         if (ret < 0)
1376                 return ret;
1377         sc->stats.phy.mflags |= sc->stats.phy.flags;
1378
1379         /* in case of a flags ( for example delineation LOSS (& 0x10)),
1380          * we check the status again in order to detect the failure earlier
1381          */
1382         if (sc->stats.phy.flags) {
1383                 uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
1384                        sc->stats.phy.flags);
1385                 return 0;
1386         }
1387
1388         ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data);
1389         if (ret < 0)
1390                 return ret;
1391
1392         uea_set_bulk_timeout(sc, (data >> 16) * 32);
1393         sc->stats.phy.dsrate = (data >> 16) * 32;
1394         sc->stats.phy.usrate = (data & 0xffff) * 32;
1395         UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
1396
1397         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data);
1398         if (ret < 0)
1399                 return ret;
1400         sc->stats.phy.dsattenuation = (data & 0xff) / 2;
1401
1402         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data);
1403         if (ret < 0)
1404                 return ret;
1405         sc->stats.phy.usattenuation = (data & 0xff) / 2;
1406
1407         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin);
1408         if (ret < 0)
1409                 return ret;
1410
1411         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin);
1412         if (ret < 0)
1413                 return ret;
1414
1415         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow);
1416         if (ret < 0)
1417                 return ret;
1418
1419         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow);
1420         if (ret < 0)
1421                 return ret;
1422
1423         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc);
1424         if (ret < 0)
1425                 return ret;
1426
1427         /* only for atu-c */
1428         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc);
1429         if (ret < 0)
1430                 return ret;
1431
1432         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr);
1433         if (ret < 0)
1434                 return ret;
1435
1436         /* only for atu-c */
1437         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr);
1438         if (ret < 0)
1439                 return ret;
1440
1441         ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco);
1442         if (ret < 0)
1443                 return ret;
1444
1445         ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe);
1446         if (ret < 0)
1447                 return ret;
1448
1449         return 0;
1450 }
1451
1452 static int uea_stat_e4(struct uea_softc *sc)
1453 {
1454         u32 data;
1455         u32 tmp_arr[2];
1456         int ret;
1457
1458         uea_enters(INS_TO_USBDEV(sc));
1459         data = sc->stats.phy.state;
1460
1461         /* XXX only need to be done before operationnal... */
1462         ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state);
1463         if (ret < 0)
1464                 return ret;
1465
1466         switch (sc->stats.phy.state) {
1467         case 0x0:       /* not yet synchronized */
1468         case 0x1:
1469         case 0x3:
1470         case 0x4:
1471                 uea_dbg(INS_TO_USBDEV(sc), "modem not yet "
1472                                                 "synchronized\n");
1473                 return 0;
1474         case 0x5:       /* initialization */
1475         case 0x6:
1476         case 0x9:
1477         case 0xa:
1478                 uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
1479                 return 0;
1480         case 0x2:       /* fail ... */
1481                 uea_info(INS_TO_USBDEV(sc), "modem synchronization "
1482                                 "failed (may be try other cmv/dsp)\n");
1483                 return -EAGAIN;
1484         case 0x7:       /* operational */
1485                 break;
1486         default:
1487                 uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n",
1488                                                 sc->stats.phy.state);
1489                 return 0;
1490         }
1491
1492         if (data != 7) {
1493                 uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
1494                 uea_info(INS_TO_USBDEV(sc), "modem operational\n");
1495
1496                 /* release the dsp firmware as it is not needed until
1497                  * the next failure
1498                  */
1499                 if (sc->dsp_firm) {
1500                         release_firmware(sc->dsp_firm);
1501                         sc->dsp_firm = NULL;
1502                 }
1503         }
1504
1505         /* always update it as atm layer could not be init when we switch to
1506          * operational state
1507          */
1508         UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
1509
1510         /* wake up processes waiting for synchronization */
1511         wake_up(&sc->sync_q);
1512
1513         /* TODO improve this state machine :
1514          * we need some CMV info : what they do and their unit
1515          * we should find the equivalent of eagle3- CMV
1516          */
1517         /* check flags */
1518         ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags);
1519         if (ret < 0)
1520                 return ret;
1521         sc->stats.phy.mflags |= sc->stats.phy.flags;
1522
1523         /* in case of a flags ( for example delineation LOSS (& 0x10)),
1524          * we check the status again in order to detect the failure earlier
1525          */
1526         if (sc->stats.phy.flags) {
1527                 uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
1528                        sc->stats.phy.flags);
1529                 if (sc->stats.phy.flags & 1) /* delineation LOSS */
1530                         return -EAGAIN;
1531                 if (sc->stats.phy.flags & 0x4000) /* Reset Flag */
1532                         return -EAGAIN;
1533                 return 0;
1534         }
1535
1536         /* rate data may be in upper or lower half of 64 bit word, strange */
1537         ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr);
1538         if (ret < 0)
1539                 return ret;
1540         data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
1541         sc->stats.phy.usrate = data / 1000;
1542
1543         ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr);
1544         if (ret < 0)
1545                 return ret;
1546         data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
1547         uea_set_bulk_timeout(sc, data / 1000);
1548         sc->stats.phy.dsrate = data / 1000;
1549         UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
1550
1551         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data);
1552         if (ret < 0)
1553                 return ret;
1554         sc->stats.phy.dsattenuation = data / 10;
1555
1556         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data);
1557         if (ret < 0)
1558                 return ret;
1559         sc->stats.phy.usattenuation = data / 10;
1560
1561         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data);
1562         if (ret < 0)
1563                 return ret;
1564         sc->stats.phy.dsmargin = data / 2;
1565
1566         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data);
1567         if (ret < 0)
1568                 return ret;
1569         sc->stats.phy.usmargin = data / 10;
1570
1571         return 0;
1572 }
1573
1574 static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
1575 {
1576         char file_arr[] = "CMVxy.bin";
1577         char *file;
1578
1579         /* set proper name corresponding modem version and line type */
1580         if (cmv_file[sc->modem_index] == NULL) {
1581                 if (UEA_CHIP_VERSION(sc) == ADI930)
1582                         file_arr[3] = '9';
1583                 else if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
1584                         file_arr[3] = '4';
1585                 else
1586                         file_arr[3] = 'e';
1587
1588                 file_arr[4] = IS_ISDN(sc) ? 'i' : 'p';
1589                 file = file_arr;
1590         } else
1591                 file = cmv_file[sc->modem_index];
1592
1593         strcpy(cmv_name, FW_DIR);
1594         strlcat(cmv_name, file, UEA_FW_NAME_MAX);
1595         if (ver == 2)
1596                 strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
1597 }
1598
1599 static int request_cmvs_old(struct uea_softc *sc,
1600                  void **cmvs, const struct firmware **fw)
1601 {
1602         int ret, size;
1603         u8 *data;
1604         char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
1605
1606         cmvs_file_name(sc, cmv_name, 1);
1607         ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
1608         if (ret < 0) {
1609                 uea_err(INS_TO_USBDEV(sc),
1610                        "requesting firmware %s failed with error %d\n",
1611                        cmv_name, ret);
1612                 return ret;
1613         }
1614
1615         data = (u8 *) (*fw)->data;
1616         size = (*fw)->size;
1617         if (size < 1)
1618                 goto err_fw_corrupted;
1619
1620         if (size != *data * sizeof(struct uea_cmvs_v1) + 1)
1621                 goto err_fw_corrupted;
1622
1623         *cmvs = (void *)(data + 1);
1624         return *data;
1625
1626 err_fw_corrupted:
1627         uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
1628         release_firmware(*fw);
1629         return -EILSEQ;
1630 }
1631
1632 static int request_cmvs(struct uea_softc *sc,
1633                  void **cmvs, const struct firmware **fw, int *ver)
1634 {
1635         int ret, size;
1636         u32 crc;
1637         u8 *data;
1638         char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
1639
1640         cmvs_file_name(sc, cmv_name, 2);
1641         ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
1642         if (ret < 0) {
1643                 /* if caller can handle old version, try to provide it */
1644                 if (*ver == 1) {
1645                         uea_warn(INS_TO_USBDEV(sc), "requesting "
1646                                                         "firmware %s failed, "
1647                                 "try to get older cmvs\n", cmv_name);
1648                         return request_cmvs_old(sc, cmvs, fw);
1649                 }
1650                 uea_err(INS_TO_USBDEV(sc),
1651                        "requesting firmware %s failed with error %d\n",
1652                        cmv_name, ret);
1653                 return ret;
1654         }
1655
1656         size = (*fw)->size;
1657         data = (u8 *) (*fw)->data;
1658         if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
1659                 if (*ver == 1) {
1660                         uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted,"
1661                                 " try to get older cmvs\n", cmv_name);
1662                         release_firmware(*fw);
1663                         return request_cmvs_old(sc, cmvs, fw);
1664                 }
1665                 goto err_fw_corrupted;
1666         }
1667
1668         *ver = 2;
1669
1670         data += 4;
1671         size -= 4;
1672         if (size < 5)
1673                 goto err_fw_corrupted;
1674
1675         crc = get_unaligned_le32(data);
1676         data += 4;
1677         size -= 4;
1678         if (crc32_be(0, data, size) != crc)
1679                 goto err_fw_corrupted;
1680
1681         if (size != *data * sizeof(struct uea_cmvs_v2) + 1)
1682                 goto err_fw_corrupted;
1683
1684         *cmvs = (void *) (data + 1);
1685         return *data;
1686
1687 err_fw_corrupted:
1688         uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
1689         release_firmware(*fw);
1690         return -EILSEQ;
1691 }
1692
1693 static int uea_send_cmvs_e1(struct uea_softc *sc)
1694 {
1695         int i, ret, len;
1696         void *cmvs_ptr;
1697         const struct firmware *cmvs_fw;
1698         int ver = 1; /* we can handle v1 cmv firmware version; */
1699
1700         /* Enter in R-IDLE (cmv) until instructed otherwise */
1701         ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
1702         if (ret < 0)
1703                 return ret;
1704
1705         /* Dump firmware version */
1706         ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid);
1707         if (ret < 0)
1708                 return ret;
1709         uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
1710                         sc->stats.phy.firmid);
1711
1712         /* get options */
1713         ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
1714         if (ret < 0)
1715                 return ret;
1716
1717         /* send options */
1718         if (ver == 1) {
1719                 struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr;
1720
1721                 uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, "
1722                         "please update your firmware\n");
1723
1724                 for (i = 0; i < len; i++) {
1725                         ret = uea_write_cmv_e1(sc,
1726                                 get_unaligned_le32(&cmvs_v1[i].address),
1727                                 get_unaligned_le16(&cmvs_v1[i].offset),
1728                                 get_unaligned_le32(&cmvs_v1[i].data));
1729                         if (ret < 0)
1730                                 goto out;
1731                 }
1732         } else if (ver == 2) {
1733                 struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
1734
1735                 for (i = 0; i < len; i++) {
1736                         ret = uea_write_cmv_e1(sc,
1737                                 get_unaligned_le32(&cmvs_v2[i].address),
1738                                 (u16) get_unaligned_le32(&cmvs_v2[i].offset),
1739                                 get_unaligned_le32(&cmvs_v2[i].data));
1740                         if (ret < 0)
1741                                 goto out;
1742                 }
1743         } else {
1744                 /* This realy should not happen */
1745                 uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
1746                 goto out;
1747         }
1748
1749         /* Enter in R-ACT-REQ */
1750         ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
1751         uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
1752         uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
1753                                                 "synchronization...\n");
1754 out:
1755         release_firmware(cmvs_fw);
1756         return ret;
1757 }
1758
1759 static int uea_send_cmvs_e4(struct uea_softc *sc)
1760 {
1761         int i, ret, len;
1762         void *cmvs_ptr;
1763         const struct firmware *cmvs_fw;
1764         int ver = 2; /* we can only handle v2 cmv firmware version; */
1765
1766         /* Enter in R-IDLE (cmv) until instructed otherwise */
1767         ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
1768         if (ret < 0)
1769                 return ret;
1770
1771         /* Dump firmware version */
1772         /* XXX don't read the 3th byte as it is always 6 */
1773         ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid);
1774         if (ret < 0)
1775                 return ret;
1776         uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
1777                         sc->stats.phy.firmid);
1778
1779
1780         /* get options */
1781         ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
1782         if (ret < 0)
1783                 return ret;
1784
1785         /* send options */
1786         if (ver == 2) {
1787                 struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
1788
1789                 for (i = 0; i < len; i++) {
1790                         ret = uea_write_cmv_e4(sc, 1,
1791                                 get_unaligned_le32(&cmvs_v2[i].group),
1792                                 get_unaligned_le32(&cmvs_v2[i].address),
1793                                 get_unaligned_le32(&cmvs_v2[i].offset),
1794                                 get_unaligned_le32(&cmvs_v2[i].data));
1795                         if (ret < 0)
1796                                 goto out;
1797                 }
1798         } else {
1799                 /* This realy should not happen */
1800                 uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
1801                 goto out;
1802         }
1803
1804         /* Enter in R-ACT-REQ */
1805         ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
1806         uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
1807         uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
1808                                                 "synchronization...\n");
1809 out:
1810         release_firmware(cmvs_fw);
1811         return ret;
1812 }
1813
1814 /* Start boot post firmware modem:
1815  * - send reset commands through usb control pipe
1816  * - start workqueue for DSP loading
1817  * - send CMV options to modem
1818  */
1819
1820 static int uea_start_reset(struct uea_softc *sc)
1821 {
1822         u16 zero = 0;   /* ;-) */
1823         int ret;
1824
1825         uea_enters(INS_TO_USBDEV(sc));
1826         uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
1827
1828         /* mask interrupt */
1829         sc->booting = 1;
1830         /* We need to set this here because, a ack timeout could have occured,
1831          * but before we start the reboot, the ack occurs and set this to 1.
1832          * So we will failed to wait Ready CMV.
1833          */
1834         sc->cmv_ack = 0;
1835         UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
1836
1837         /* reset statistics */
1838         memset(&sc->stats, 0, sizeof(struct uea_stats));
1839
1840         /* tell the modem that we want to boot in IDMA mode */
1841         uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
1842         uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
1843
1844         /* enter reset mode */
1845         uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
1846
1847         /* original driver use 200ms, but windows driver use 100ms */
1848         ret = uea_wait(sc, 0, msecs_to_jiffies(100));
1849         if (ret < 0)
1850                 return ret;
1851
1852         /* leave reset mode */
1853         uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
1854
1855         if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
1856                 /* clear tx and rx mailboxes */
1857                 uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
1858                 uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
1859                 uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
1860         }
1861
1862         ret = uea_wait(sc, 0, msecs_to_jiffies(1000));
1863         if (ret < 0)
1864                 return ret;
1865
1866         if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
1867                 sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
1868                                                         E4_MODEMREADY, 1);
1869         else
1870                 sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
1871                                                         E1_MODEMREADY);
1872
1873         /* demask interrupt */
1874         sc->booting = 0;
1875
1876         /* start loading DSP */
1877         sc->pageno = 0;
1878         sc->ovl = 0;
1879         queue_work(sc->work_q, &sc->task);
1880
1881         /* wait for modem ready CMV */
1882         ret = wait_cmv_ack(sc);
1883         if (ret < 0)
1884                 return ret;
1885
1886         uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
1887
1888         ret = sc->send_cmvs(sc);
1889         if (ret < 0)
1890                 return ret;
1891
1892         sc->reset = 0;
1893         uea_leaves(INS_TO_USBDEV(sc));
1894         return ret;
1895 }
1896
1897 /*
1898  * In case of an error wait 1s before rebooting the modem
1899  * if the modem don't request reboot (-EAGAIN).
1900  * Monitor the modem every 1s.
1901  */
1902
1903 static int uea_kthread(void *data)
1904 {
1905         struct uea_softc *sc = data;
1906         int ret = -EAGAIN;
1907
1908         set_freezable();
1909         uea_enters(INS_TO_USBDEV(sc));
1910         while (!kthread_should_stop()) {
1911                 if (ret < 0 || sc->reset)
1912                         ret = uea_start_reset(sc);
1913                 if (!ret)
1914                         ret = sc->stat(sc);
1915                 if (ret != -EAGAIN)
1916                         uea_wait(sc, 0, msecs_to_jiffies(1000));
1917                 try_to_freeze();
1918         }
1919         uea_leaves(INS_TO_USBDEV(sc));
1920         return ret;
1921 }
1922
1923 /* Load second usb firmware for ADI930 chip */
1924 static int load_XILINX_firmware(struct uea_softc *sc)
1925 {
1926         const struct firmware *fw_entry;
1927         int ret, size, u, ln;
1928         const u8 *pfw;
1929         u8 value;
1930         char *fw_name = FW_DIR "930-fpga.bin";
1931
1932         uea_enters(INS_TO_USBDEV(sc));
1933
1934         ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev);
1935         if (ret) {
1936                 uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n",
1937                        fw_name);
1938                 goto err0;
1939         }
1940
1941         pfw = fw_entry->data;
1942         size = fw_entry->size;
1943         if (size != 0x577B) {
1944                 uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
1945                        fw_name);
1946                 ret = -EILSEQ;
1947                 goto err1;
1948         }
1949         for (u = 0; u < size; u += ln) {
1950                 ln = min(size - u, 64);
1951                 ret = uea_request(sc, 0xe, 0, ln, pfw + u);
1952                 if (ret < 0) {
1953                         uea_err(INS_TO_USBDEV(sc),
1954                                "elsa download data failed (%d)\n", ret);
1955                         goto err1;
1956                 }
1957         }
1958
1959         /* finish to send the fpga */
1960         ret = uea_request(sc, 0xe, 1, 0, NULL);
1961         if (ret < 0) {
1962                 uea_err(INS_TO_USBDEV(sc),
1963                                 "elsa download data failed (%d)\n", ret);
1964                 goto err1;
1965         }
1966
1967         /* Tell the modem we finish : de-assert reset */
1968         value = 0;
1969         ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
1970         if (ret < 0)
1971                 uea_err(sc->usb_dev, "elsa de-assert failed with error"
1972                                                                 " %d\n", ret);
1973
1974 err1:
1975         release_firmware(fw_entry);
1976 err0:
1977         uea_leaves(INS_TO_USBDEV(sc));
1978         return ret;
1979 }
1980
1981 /* The modem send us an ack. First with check if it right */
1982 static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
1983 {
1984         struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1;
1985         struct cmv_e1 *cmv = &intr->u.e1.s2.cmv;
1986
1987         uea_enters(INS_TO_USBDEV(sc));
1988         if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE)
1989                 goto bad1;
1990
1991         if (cmv->bDirection != E1_MODEMTOHOST)
1992                 goto bad1;
1993
1994         /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
1995          * the first MEMACCESS cmv. Ignore it...
1996          */
1997         if (cmv->bFunction != dsc->function) {
1998                 if (UEA_CHIP_VERSION(sc) == ADI930
1999                                 && cmv->bFunction ==  E1_MAKEFUNCTION(2, 2)) {
2000                         cmv->wIndex = cpu_to_le16(dsc->idx);
2001                         put_unaligned_le32(dsc->address,
2002                                                 &cmv->dwSymbolicAddress);
2003                         cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
2004                 } else
2005                         goto bad2;
2006         }
2007
2008         if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
2009                                                         E1_MODEMREADY)) {
2010                 wake_up_cmv_ack(sc);
2011                 uea_leaves(INS_TO_USBDEV(sc));
2012                 return;
2013         }
2014
2015         /* in case of MEMACCESS */
2016         if (le16_to_cpu(cmv->wIndex) != dsc->idx ||
2017             get_unaligned_le32(&cmv->dwSymbolicAddress) != dsc->address ||
2018             le16_to_cpu(cmv->wOffsetAddress) != dsc->offset)
2019                 goto bad2;
2020
2021         sc->data = get_unaligned_le32(&cmv->dwData);
2022         sc->data = sc->data << 16 | sc->data >> 16;
2023
2024         wake_up_cmv_ack(sc);
2025         uea_leaves(INS_TO_USBDEV(sc));
2026         return;
2027
2028 bad2:
2029         uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
2030                         "Function : %d, Subfunction : %d\n",
2031                         E1_FUNCTION_TYPE(cmv->bFunction),
2032                         E1_FUNCTION_SUBTYPE(cmv->bFunction));
2033         uea_leaves(INS_TO_USBDEV(sc));
2034         return;
2035
2036 bad1:
2037         uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
2038                         "wPreamble %d, bDirection %d\n",
2039                         le16_to_cpu(cmv->wPreamble), cmv->bDirection);
2040         uea_leaves(INS_TO_USBDEV(sc));
2041 }
2042
2043 /* The modem send us an ack. First with check if it right */
2044 static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
2045 {
2046         struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4;
2047         struct cmv_e4 *cmv = &intr->u.e4.s2.cmv;
2048
2049         uea_enters(INS_TO_USBDEV(sc));
2050         uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n",
2051                 be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction),
2052                 be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress),
2053                 be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1]));
2054
2055         if (be16_to_cpu(cmv->wFunction) != dsc->function)
2056                 goto bad2;
2057
2058         if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
2059                                                 E4_MODEMREADY, 1)) {
2060                 wake_up_cmv_ack(sc);
2061                 uea_leaves(INS_TO_USBDEV(sc));
2062                 return;
2063         }
2064
2065         /* in case of MEMACCESS */
2066         if (be16_to_cpu(cmv->wOffset) != dsc->offset ||
2067             be16_to_cpu(cmv->wGroup) != dsc->group ||
2068             be16_to_cpu(cmv->wAddress) != dsc->address)
2069                 goto bad2;
2070
2071         sc->data = be32_to_cpu(cmv->dwData[0]);
2072         sc->data1 = be32_to_cpu(cmv->dwData[1]);
2073         wake_up_cmv_ack(sc);
2074         uea_leaves(INS_TO_USBDEV(sc));
2075         return;
2076
2077 bad2:
2078         uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
2079                         "Function : %d, Subfunction : %d\n",
2080                         E4_FUNCTION_TYPE(cmv->wFunction),
2081                         E4_FUNCTION_SUBTYPE(cmv->wFunction));
2082         uea_leaves(INS_TO_USBDEV(sc));
2083         return;
2084 }
2085
2086 static void uea_schedule_load_page_e1(struct uea_softc *sc,
2087                                                 struct intr_pkt *intr)
2088 {
2089         sc->pageno = intr->e1_bSwapPageNo;
2090         sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
2091         queue_work(sc->work_q, &sc->task);
2092 }
2093
2094 static void uea_schedule_load_page_e4(struct uea_softc *sc,
2095                                                 struct intr_pkt *intr)
2096 {
2097         sc->pageno = intr->e4_bSwapPageNo;
2098         queue_work(sc->work_q, &sc->task);
2099 }
2100
2101 /*
2102  * interrupt handler
2103  */
2104 static void uea_intr(struct urb *urb)
2105 {
2106         struct uea_softc *sc = urb->context;
2107         struct intr_pkt *intr = urb->transfer_buffer;
2108         int status = urb->status;
2109
2110         uea_enters(INS_TO_USBDEV(sc));
2111
2112         if (unlikely(status < 0)) {
2113                 uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
2114                        status);
2115                 return;
2116         }
2117
2118         /* device-to-host interrupt */
2119         if (intr->bType != 0x08 || sc->booting) {
2120                 uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
2121                 goto resubmit;
2122         }
2123
2124         switch (le16_to_cpu(intr->wInterrupt)) {
2125         case INT_LOADSWAPPAGE:
2126                 sc->schedule_load_page(sc, intr);
2127                 break;
2128
2129         case INT_INCOMINGCMV:
2130                 sc->dispatch_cmv(sc, intr);
2131                 break;
2132
2133         default:
2134                 uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
2135                        le16_to_cpu(intr->wInterrupt));
2136         }
2137
2138 resubmit:
2139         usb_submit_urb(sc->urb_int, GFP_ATOMIC);
2140 }
2141
2142 /*
2143  * Start the modem : init the data and start kernel thread
2144  */
2145 static int uea_boot(struct uea_softc *sc)
2146 {
2147         int ret, size;
2148         struct intr_pkt *intr;
2149
2150         uea_enters(INS_TO_USBDEV(sc));
2151
2152         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
2153                 size = E4_INTR_PKT_SIZE;
2154                 sc->dispatch_cmv = uea_dispatch_cmv_e4;
2155                 sc->schedule_load_page = uea_schedule_load_page_e4;
2156                 sc->stat = uea_stat_e4;
2157                 sc->send_cmvs = uea_send_cmvs_e4;
2158                 INIT_WORK(&sc->task, uea_load_page_e4);
2159         } else {
2160                 size = E1_INTR_PKT_SIZE;
2161                 sc->dispatch_cmv = uea_dispatch_cmv_e1;
2162                 sc->schedule_load_page = uea_schedule_load_page_e1;
2163                 sc->stat = uea_stat_e1;
2164                 sc->send_cmvs = uea_send_cmvs_e1;
2165                 INIT_WORK(&sc->task, uea_load_page_e1);
2166         }
2167
2168         init_waitqueue_head(&sc->sync_q);
2169
2170         sc->work_q = create_workqueue("ueagle-dsp");
2171         if (!sc->work_q) {
2172                 uea_err(INS_TO_USBDEV(sc), "cannot allocate workqueue\n");
2173                 uea_leaves(INS_TO_USBDEV(sc));
2174                 return -ENOMEM;
2175         }
2176
2177         if (UEA_CHIP_VERSION(sc) == ADI930)
2178                 load_XILINX_firmware(sc);
2179
2180         intr = kmalloc(size, GFP_KERNEL);
2181         if (!intr) {
2182                 uea_err(INS_TO_USBDEV(sc),
2183                        "cannot allocate interrupt package\n");
2184                 goto err0;
2185         }
2186
2187         sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
2188         if (!sc->urb_int) {
2189                 uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
2190                 goto err1;
2191         }
2192
2193         usb_fill_int_urb(sc->urb_int, sc->usb_dev,
2194                          usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
2195                          intr, size, uea_intr, sc,
2196                          sc->usb_dev->actconfig->interface[0]->altsetting[0].
2197                          endpoint[0].desc.bInterval);
2198
2199         ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
2200         if (ret < 0) {
2201                 uea_err(INS_TO_USBDEV(sc),
2202                        "urb submition failed with error %d\n", ret);
2203                 goto err1;
2204         }
2205
2206         sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
2207         if (sc->kthread == ERR_PTR(-ENOMEM)) {
2208                 uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
2209                 goto err2;
2210         }
2211
2212         uea_leaves(INS_TO_USBDEV(sc));
2213         return 0;
2214
2215 err2:
2216         usb_kill_urb(sc->urb_int);
2217 err1:
2218         usb_free_urb(sc->urb_int);
2219         sc->urb_int = NULL;
2220         kfree(intr);
2221 err0:
2222         destroy_workqueue(sc->work_q);
2223         uea_leaves(INS_TO_USBDEV(sc));
2224         return -ENOMEM;
2225 }
2226
2227 /*
2228  * Stop the modem : kill kernel thread and free data
2229  */
2230 static void uea_stop(struct uea_softc *sc)
2231 {
2232         int ret;
2233         uea_enters(INS_TO_USBDEV(sc));
2234         ret = kthread_stop(sc->kthread);
2235         uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
2236
2237         uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
2238
2239         usb_kill_urb(sc->urb_int);
2240         kfree(sc->urb_int->transfer_buffer);
2241         usb_free_urb(sc->urb_int);
2242
2243         /* stop any pending boot process, when no one can schedule work */
2244         destroy_workqueue(sc->work_q);
2245
2246         if (sc->dsp_firm)
2247                 release_firmware(sc->dsp_firm);
2248         uea_leaves(INS_TO_USBDEV(sc));
2249 }
2250
2251 /* syfs interface */
2252 static struct uea_softc *dev_to_uea(struct device *dev)
2253 {
2254         struct usb_interface *intf;
2255         struct usbatm_data *usbatm;
2256
2257         intf = to_usb_interface(dev);
2258         if (!intf)
2259                 return NULL;
2260
2261         usbatm = usb_get_intfdata(intf);
2262         if (!usbatm)
2263                 return NULL;
2264
2265         return usbatm->driver_data;
2266 }
2267
2268 static ssize_t read_status(struct device *dev, struct device_attribute *attr,
2269                 char *buf)
2270 {
2271         int ret = -ENODEV;
2272         struct uea_softc *sc;
2273
2274         mutex_lock(&uea_mutex);
2275         sc = dev_to_uea(dev);
2276         if (!sc)
2277                 goto out;
2278         ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
2279 out:
2280         mutex_unlock(&uea_mutex);
2281         return ret;
2282 }
2283
2284 static ssize_t reboot(struct device *dev, struct device_attribute *attr,
2285                 const char *buf, size_t count)
2286 {
2287         int ret = -ENODEV;
2288         struct uea_softc *sc;
2289
2290         mutex_lock(&uea_mutex);
2291         sc = dev_to_uea(dev);
2292         if (!sc)
2293                 goto out;
2294         sc->reset = 1;
2295         ret = count;
2296 out:
2297         mutex_unlock(&uea_mutex);
2298         return ret;
2299 }
2300
2301 static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
2302
2303 static ssize_t read_human_status(struct device *dev,
2304                         struct device_attribute *attr, char *buf)
2305 {
2306         int ret = -ENODEV;
2307         int modem_state;
2308         struct uea_softc *sc;
2309
2310         mutex_lock(&uea_mutex);
2311         sc = dev_to_uea(dev);
2312         if (!sc)
2313                 goto out;
2314
2315         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
2316                 switch (sc->stats.phy.state) {
2317                 case 0x0:       /* not yet synchronized */
2318                 case 0x1:
2319                 case 0x3:
2320                 case 0x4:
2321                         modem_state = 0;
2322                         break;
2323                 case 0x5:       /* initialization */
2324                 case 0x6:
2325                 case 0x9:
2326                 case 0xa:
2327                         modem_state = 1;
2328                         break;
2329                 case 0x7:       /* operational */
2330                         modem_state = 2;
2331                         break;
2332                 case 0x2:       /* fail ... */
2333                         modem_state = 3;
2334                         break;
2335                 default:        /* unknown */
2336                         modem_state = 4;
2337                         break;
2338                 }
2339         } else
2340                 modem_state = GET_STATUS(sc->stats.phy.state);
2341
2342         switch (modem_state) {
2343         case 0:
2344                 ret = sprintf(buf, "Modem is booting\n");
2345                 break;
2346         case 1:
2347                 ret = sprintf(buf, "Modem is initializing\n");
2348                 break;
2349         case 2:
2350                 ret = sprintf(buf, "Modem is operational\n");
2351                 break;
2352         case 3:
2353                 ret = sprintf(buf, "Modem synchronization failed\n");
2354                 break;
2355         default:
2356                 ret = sprintf(buf, "Modem state is unknown\n");
2357                 break;
2358         }
2359 out:
2360         mutex_unlock(&uea_mutex);
2361         return ret;
2362 }
2363
2364 static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
2365                                 read_human_status, NULL);
2366
2367 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
2368                 char *buf)
2369 {
2370         int ret = -ENODEV;
2371         struct uea_softc *sc;
2372         char *delin = "GOOD";
2373
2374         mutex_lock(&uea_mutex);
2375         sc = dev_to_uea(dev);
2376         if (!sc)
2377                 goto out;
2378
2379         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
2380                 if (sc->stats.phy.flags & 0x4000)
2381                         delin = "RESET";
2382                 else if (sc->stats.phy.flags & 0x0001)
2383                         delin = "LOSS";
2384         } else {
2385                 if (sc->stats.phy.flags & 0x0C00)
2386                         delin = "ERROR";
2387                 else if (sc->stats.phy.flags & 0x0030)
2388                         delin = "LOSS";
2389         }
2390
2391         ret = sprintf(buf, "%s\n", delin);
2392 out:
2393         mutex_unlock(&uea_mutex);
2394         return ret;
2395 }
2396
2397 static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
2398
2399 #define UEA_ATTR(name, reset)                                   \
2400                                                                 \
2401 static ssize_t read_##name(struct device *dev,                  \
2402                 struct device_attribute *attr, char *buf)       \
2403 {                                                               \
2404         int ret = -ENODEV;                                      \
2405         struct uea_softc *sc;                                   \
2406                                                                 \
2407         mutex_lock(&uea_mutex);                                 \
2408         sc = dev_to_uea(dev);                                   \
2409         if (!sc)                                                \
2410                 goto out;                                       \
2411         ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name);  \
2412         if (reset)                                              \
2413                 sc->stats.phy.name = 0;                         \
2414 out:                                                            \
2415         mutex_unlock(&uea_mutex);                               \
2416         return ret;                                             \
2417 }                                                               \
2418                                                                 \
2419 static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL)
2420
2421 UEA_ATTR(mflags, 1);
2422 UEA_ATTR(vidcpe, 0);
2423 UEA_ATTR(usrate, 0);
2424 UEA_ATTR(dsrate, 0);
2425 UEA_ATTR(usattenuation, 0);
2426 UEA_ATTR(dsattenuation, 0);
2427 UEA_ATTR(usmargin, 0);
2428 UEA_ATTR(dsmargin, 0);
2429 UEA_ATTR(txflow, 0);
2430 UEA_ATTR(rxflow, 0);
2431 UEA_ATTR(uscorr, 0);
2432 UEA_ATTR(dscorr, 0);
2433 UEA_ATTR(usunc, 0);
2434 UEA_ATTR(dsunc, 0);
2435 UEA_ATTR(firmid, 0);
2436
2437 /* Retrieve the device End System Identifier (MAC) */
2438
2439 #define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10)
2440 static int uea_getesi(struct uea_softc *sc, u_char * esi)
2441 {
2442         unsigned char mac_str[2 * ETH_ALEN + 1];
2443         int i;
2444         if (usb_string
2445             (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str,
2446              sizeof(mac_str)) != 2 * ETH_ALEN)
2447                 return 1;
2448
2449         for (i = 0; i < ETH_ALEN; i++)
2450                 esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]);
2451
2452         return 0;
2453 }
2454
2455 /* ATM stuff */
2456 static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
2457 {
2458         struct uea_softc *sc = usbatm->driver_data;
2459
2460         return uea_getesi(sc, atm_dev->esi);
2461 }
2462
2463 static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf)
2464 {
2465         struct uea_softc *sc = usbatm->driver_data;
2466
2467         wait_event_interruptible(sc->sync_q, IS_OPERATIONAL(sc));
2468
2469         return 0;
2470
2471 }
2472
2473 static int claim_interface(struct usb_device *usb_dev,
2474                            struct usbatm_data *usbatm, int ifnum)
2475 {
2476         int ret;
2477         struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum);
2478
2479         if (!intf) {
2480                 uea_err(usb_dev, "interface %d not found\n", ifnum);
2481                 return -ENODEV;
2482         }
2483
2484         ret = usb_driver_claim_interface(&uea_driver, intf, usbatm);
2485         if (ret != 0)
2486                 uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum,
2487                        ret);
2488         return ret;
2489 }
2490
2491 static struct attribute *attrs[] = {
2492         &dev_attr_stat_status.attr,
2493         &dev_attr_stat_mflags.attr,
2494         &dev_attr_stat_human_status.attr,
2495         &dev_attr_stat_delin.attr,
2496         &dev_attr_stat_vidcpe.attr,
2497         &dev_attr_stat_usrate.attr,
2498         &dev_attr_stat_dsrate.attr,
2499         &dev_attr_stat_usattenuation.attr,
2500         &dev_attr_stat_dsattenuation.attr,
2501         &dev_attr_stat_usmargin.attr,
2502         &dev_attr_stat_dsmargin.attr,
2503         &dev_attr_stat_txflow.attr,
2504         &dev_attr_stat_rxflow.attr,
2505         &dev_attr_stat_uscorr.attr,
2506         &dev_attr_stat_dscorr.attr,
2507         &dev_attr_stat_usunc.attr,
2508         &dev_attr_stat_dsunc.attr,
2509         &dev_attr_stat_firmid.attr,
2510         NULL,
2511 };
2512 static struct attribute_group attr_grp = {
2513         .attrs = attrs,
2514 };
2515
2516 static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
2517                    const struct usb_device_id *id)
2518 {
2519         struct usb_device *usb = interface_to_usbdev(intf);
2520         struct uea_softc *sc;
2521         int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
2522         unsigned int alt;
2523
2524         uea_enters(usb);
2525
2526         /* interface 0 is for firmware/monitoring */
2527         if (ifnum != UEA_INTR_IFACE_NO)
2528                 return -ENODEV;
2529
2530         usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);
2531
2532         /* interface 1 is for outbound traffic */
2533         ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
2534         if (ret < 0)
2535                 return ret;
2536
2537         /* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
2538         if (UEA_CHIP_VERSION(id) != ADI930) {
2539                 /* interface 2 is for inbound traffic */
2540                 ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
2541                 if (ret < 0)
2542                         return ret;
2543         }
2544
2545         sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
2546         if (!sc) {
2547                 uea_err(usb, "uea_init: not enough memory !\n");
2548                 return -ENOMEM;
2549         }
2550
2551         sc->usb_dev = usb;
2552         usbatm->driver_data = sc;
2553         sc->usbatm = usbatm;
2554         sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
2555         sc->driver_info = id->driver_info;
2556
2557         /* first try to use module parameter */
2558         if (annex[sc->modem_index] == 1)
2559                 sc->annex = ANNEXA;
2560         else if (annex[sc->modem_index] == 2)
2561                 sc->annex = ANNEXB;
2562         /* try to autodetect annex */
2563         else if (sc->driver_info & AUTO_ANNEX_A)
2564                 sc->annex = ANNEXA;
2565         else if (sc->driver_info & AUTO_ANNEX_B)
2566                 sc->annex = ANNEXB;
2567         else
2568                 sc->annex = (le16_to_cpu
2569                 (sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA;
2570
2571         alt = altsetting[sc->modem_index];
2572         /* ADI930 don't support iso */
2573         if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
2574                 if (alt <= 8 &&
2575                         usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
2576                         uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
2577                         uea_info(usb, "using iso mode\n");
2578                         usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
2579                 } else {
2580                         uea_err(usb, "setting alternate %u failed for "
2581                                         "2 interface, using bulk mode\n", alt);
2582                 }
2583         }
2584
2585         ret = sysfs_create_group(&intf->dev.kobj, &attr_grp);
2586         if (ret < 0)
2587                 goto error;
2588
2589         ret = uea_boot(sc);
2590         if (ret < 0)
2591                 goto error_rm_grp;
2592
2593         return 0;
2594
2595 error_rm_grp:
2596         sysfs_remove_group(&intf->dev.kobj, &attr_grp);
2597 error:
2598         kfree(sc);
2599         return ret;
2600 }
2601
2602 static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
2603 {
2604         struct uea_softc *sc = usbatm->driver_data;
2605
2606         sysfs_remove_group(&intf->dev.kobj, &attr_grp);
2607         uea_stop(sc);
2608         kfree(sc);
2609 }
2610
2611 static struct usbatm_driver uea_usbatm_driver = {
2612         .driver_name = "ueagle-atm",
2613         .bind = uea_bind,
2614         .atm_start = uea_atm_open,
2615         .unbind = uea_unbind,
2616         .heavy_init = uea_heavy,
2617         .bulk_in = UEA_BULK_DATA_PIPE,
2618         .bulk_out = UEA_BULK_DATA_PIPE,
2619         .isoc_in = UEA_ISO_DATA_PIPE,
2620 };
2621
2622 static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
2623 {
2624         struct usb_device *usb = interface_to_usbdev(intf);
2625
2626         uea_enters(usb);
2627         uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
2628                 le16_to_cpu(usb->descriptor.idVendor),
2629                 le16_to_cpu(usb->descriptor.idProduct),
2630                 le16_to_cpu(usb->descriptor.bcdDevice),
2631                 chip_name[UEA_CHIP_VERSION(id)]);
2632
2633         usb_reset_device(usb);
2634
2635         if (UEA_IS_PREFIRM(id))
2636                 return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
2637
2638         return usbatm_usb_probe(intf, id, &uea_usbatm_driver);
2639 }
2640
2641 static void uea_disconnect(struct usb_interface *intf)
2642 {
2643         struct usb_device *usb = interface_to_usbdev(intf);
2644         int ifnum = intf->altsetting->desc.bInterfaceNumber;
2645         uea_enters(usb);
2646
2647         /* ADI930 has 2 interfaces and eagle 3 interfaces.
2648          * Pre-firmware device has one interface
2649          */
2650         if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
2651                 mutex_lock(&uea_mutex);
2652                 usbatm_usb_disconnect(intf);
2653                 mutex_unlock(&uea_mutex);
2654                 uea_info(usb, "ADSL device removed\n");
2655         }
2656
2657         uea_leaves(usb);
2658 }
2659
2660 /*
2661  * List of supported VID/PID
2662  */
2663 static const struct usb_device_id uea_ids[] = {
2664         {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM),
2665                 .driver_info = ADI930 | PREFIRM},
2666         {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM),
2667                 .driver_info = ADI930 | PSTFIRM},
2668         {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM),
2669                 .driver_info = EAGLE_I | PREFIRM},
2670         {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM),
2671                 .driver_info = EAGLE_I | PSTFIRM},
2672         {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM),
2673                 .driver_info = EAGLE_II | PREFIRM},
2674         {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM),
2675                 .driver_info = EAGLE_II | PSTFIRM},
2676         {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM),
2677                 .driver_info = EAGLE_II | PREFIRM},
2678         {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM),
2679                 .driver_info = EAGLE_II | PSTFIRM},
2680         {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM),
2681                 .driver_info = EAGLE_III | PREFIRM},
2682         {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM),
2683                 .driver_info = EAGLE_III | PSTFIRM},
2684         {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM),
2685                 .driver_info = EAGLE_IV | PREFIRM},
2686         {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM),
2687                 .driver_info = EAGLE_IV | PSTFIRM},
2688         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM),
2689                 .driver_info = EAGLE_I | PREFIRM},
2690         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM),
2691                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
2692         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM),
2693                 .driver_info = EAGLE_I | PREFIRM},
2694         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM),
2695                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
2696         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM),
2697                 .driver_info = EAGLE_II | PREFIRM},
2698         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM),
2699                 .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
2700         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM),
2701                 .driver_info = EAGLE_II | PREFIRM},
2702         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM),
2703                 .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
2704         {USB_DEVICE(ELSA_VID,   ELSA_PID_PREFIRM),
2705                 .driver_info = ADI930 | PREFIRM},
2706         {USB_DEVICE(ELSA_VID,   ELSA_PID_PSTFIRM),
2707                 .driver_info = ADI930 | PSTFIRM},
2708         {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PREFIRM),
2709                 .driver_info = ADI930 | PREFIRM},
2710         {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PSTFIRM),
2711                 .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
2712         {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PREFIRM),
2713                 .driver_info = ADI930 | PREFIRM},
2714         {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PSTFIRM),
2715                 .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
2716         {USB_DEVICE(USR_VID,    MILLER_A_PID_PREFIRM),
2717                 .driver_info = EAGLE_I | PREFIRM},
2718         {USB_DEVICE(USR_VID,    MILLER_A_PID_PSTFIRM),
2719                 .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
2720         {USB_DEVICE(USR_VID,    MILLER_B_PID_PREFIRM),
2721                 .driver_info = EAGLE_I | PREFIRM},
2722         {USB_DEVICE(USR_VID,    MILLER_B_PID_PSTFIRM),
2723                 .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
2724         {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PREFIRM),
2725                 .driver_info = EAGLE_I | PREFIRM},
2726         {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PSTFIRM),
2727                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
2728         {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PREFIRM),
2729                 .driver_info = EAGLE_I | PREFIRM},
2730         {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PSTFIRM),
2731                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
2732         {}
2733 };
2734
2735 /*
2736  * USB driver descriptor
2737  */
2738 static struct usb_driver uea_driver = {
2739         .name = "ueagle-atm",
2740         .id_table = uea_ids,
2741         .probe = uea_probe,
2742         .disconnect = uea_disconnect,
2743 };
2744
2745 MODULE_DEVICE_TABLE(usb, uea_ids);
2746
2747 /**
2748  * uea_init - Initialize the module.
2749  *      Register to USB subsystem
2750  */
2751 static int __init uea_init(void)
2752 {
2753         printk(KERN_INFO "[ueagle-atm] driver " EAGLEUSBVERSION " loaded\n");
2754
2755         usb_register(&uea_driver);
2756
2757         return 0;
2758 }
2759
2760 module_init(uea_init);
2761
2762 /**
2763  * uea_exit  -  Destroy module
2764  *    Deregister with USB subsystem
2765  */
2766 static void __exit uea_exit(void)
2767 {
2768         /*
2769          * This calls automatically the uea_disconnect method if necessary:
2770          */
2771         usb_deregister(&uea_driver);
2772
2773         printk(KERN_INFO "[ueagle-atm] driver unloaded\n");
2774 }
2775
2776 module_exit(uea_exit);
2777
2778 MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka");
2779 MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
2780 MODULE_LICENSE("Dual BSD/GPL");