drivers/usb/serial/kobil_sct.h

   1 #define SUSBCRequest_SetBaudRateParityAndStopBits       1
   2 #define SUSBCR_SBR_MASK                         0xFF00
   3 #define SUSBCR_SBR_1200                         0x0100
   4 #define SUSBCR_SBR_9600                         0x0200
   5 #define SUSBCR_SBR_19200                        0x0400
   6 #define SUSBCR_SBR_28800                        0x0800
   7 #define SUSBCR_SBR_38400                        0x1000
   8 #define SUSBCR_SBR_57600                        0x2000
   9 #define SUSBCR_SBR_115200                       0x4000
  10
  11 #define SUSBCR_SPASB_MASK                       0x0070
  12 #define SUSBCR_SPASB_NoParity                   0x0010
  13 #define SUSBCR_SPASB_OddParity                  0x0020
  14 #define SUSBCR_SPASB_EvenParity                 0x0040
  15
  16 #define SUSBCR_SPASB_STPMASK                    0x0003
  17 #define SUSBCR_SPASB_1StopBit                   0x0001
  18 #define SUSBCR_SPASB_2StopBits                  0x0002
  19
  20 #define SUSBCRequest_SetStatusLinesOrQueues     2
  21 #define SUSBCR_SSL_SETRTS                       0x0001
  22 #define SUSBCR_SSL_CLRRTS                       0x0002
  23 #define SUSBCR_SSL_SETDTR                       0x0004
  24 #define SUSBCR_SSL_CLRDTR                       0x0010
  25
  26 #define SUSBCR_SSL_PURGE_TXABORT                0x0100  // Kill the pending/current writes to the comm port.
  27 #define SUSBCR_SSL_PURGE_RXABORT                0x0200  // Kill the pending/current reads to the comm port.
  28 #define SUSBCR_SSL_PURGE_TXCLEAR                0x0400  // Kill the transmit queue if there.
  29 #define SUSBCR_SSL_PURGE_RXCLEAR                0x0800  // Kill the typeahead buffer if there.
  30
  31 #define SUSBCRequest_GetStatusLineState         4
  32 #define SUSBCR_GSL_RXCHAR                       0x0001  // Any Character received
  33 #define SUSBCR_GSL_TXEMPTY                      0x0004  // Transmitt Queue Empty
  34 #define SUSBCR_GSL_CTS                          0x0008  // CTS changed state
  35 #define SUSBCR_GSL_DSR                          0x0010  // DSR changed state
  36 #define SUSBCR_GSL_RLSD                         0x0020  // RLSD changed state
  37 #define SUSBCR_GSL_BREAK                        0x0040  // BREAK received
  38 #define SUSBCR_GSL_ERR                          0x0080  // Line status error occurred
  39 #define SUSBCR_GSL_RING                         0x0100  // Ring signal detected
  40
  41 #define SUSBCRequest_Misc                       8
  42 #define SUSBCR_MSC_ResetReader                  0x0001  // use a predefined reset sequence
  43 #define SUSBCR_MSC_ResetAllQueues               0x0002  // use a predefined sequence to reset the internal queues
  44
  45 #define SUSBCRequest_GetMisc                    0x10
  46 #define SUSBCR_MSC_GetFWVersion                 0x0001  /* get the firmware version from device,
  47                                                            coded like this 0xHHLLBBPP
  48                                                            with HH = Firmware Version High Byte
  49                                                            LL = Firmware Version Low Byte
  50                                                            BB = Build Number
  51                                                            PP = Further Attributes
  52                                                         */
  53
  54 #define SUSBCR_MSC_GetHWVersion                 0x0002  /* get the hardware version from device
  55                                                            coded like this 0xHHLLPPRR
  56                                                            with HH = Software Version High Byte
  57                                                            LL = Software Version Low Byte
  58                                                            PP = Further Attributes
  59                                                            RR = Reserved for the hardware ID
  60                                                         */