7 option env="KERNELVERSION"
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
16 default "$ARCH_DEFCONFIG"
17 default "arch/$ARCH/defconfig"
26 config BUILDTIME_EXTABLE_SORT
36 depends on BROKEN || !SMP
39 config INIT_ENV_ARG_LIMIT
44 Maximum of each of the number of arguments and environment
45 variables passed to init from the kernel command line.
49 string "Cross-compiler tool prefix"
51 Same as running 'make CROSS_COMPILE=prefix-' but stored for
52 default make runs in this kernel build directory. You don't
53 need to set this unless you want the configured kernel build
54 directory to select the cross-compiler automatically.
57 bool "Compile also drivers which will not load"
60 Some drivers can be compiled on a different platform than they are
61 intended to be run on. Despite they cannot be loaded there (or even
62 when they load they cannot be used due to missing HW support),
63 developers still, opposing to distributors, might want to build such
64 drivers to compile-test them.
66 If you are a developer and want to build everything available, say Y
67 here. If you are a user/distributor, say N here to exclude useless
68 drivers to be distributed.
71 string "Local version - append to kernel release"
73 Append an extra string to the end of your kernel version.
74 This will show up when you type uname, for example.
75 The string you set here will be appended after the contents of
76 any files with a filename matching localversion* in your
77 object and source tree, in that order. Your total string can
78 be a maximum of 64 characters.
80 config LOCALVERSION_AUTO
81 bool "Automatically append version information to the version string"
84 This will try to automatically determine if the current tree is a
85 release tree by looking for git tags that belong to the current
88 A string of the format -gxxxxxxxx will be added to the localversion
89 if a git-based tree is found. The string generated by this will be
90 appended after any matching localversion* files, and after the value
91 set in CONFIG_LOCALVERSION.
93 (The actual string used here is the first eight characters produced
94 by running the command:
96 $ git rev-parse --verify HEAD
98 which is done within the script "scripts/setlocalversion".)
100 config HAVE_KERNEL_GZIP
103 config HAVE_KERNEL_BZIP2
106 config HAVE_KERNEL_LZMA
109 config HAVE_KERNEL_XZ
112 config HAVE_KERNEL_LZO
116 prompt "Kernel compression mode"
118 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO
120 The linux kernel is a kind of self-extracting executable.
121 Several compression algorithms are available, which differ
122 in efficiency, compression and decompression speed.
123 Compression speed is only relevant when building a kernel.
124 Decompression speed is relevant at each boot.
126 If you have any problems with bzip2 or lzma compressed
127 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
128 version of this functionality (bzip2 only), for 2.4, was
129 supplied by Christian Ludwig)
131 High compression options are mostly useful for users, who
132 are low on disk space (embedded systems), but for whom ram
135 If in doubt, select 'gzip'
139 depends on HAVE_KERNEL_GZIP
141 The old and tried gzip compression. It provides a good balance
142 between compression ratio and decompression speed.
146 depends on HAVE_KERNEL_BZIP2
148 Its compression ratio and speed is intermediate.
149 Decompression speed is slowest among the choices. The kernel
150 size is about 10% smaller with bzip2, in comparison to gzip.
151 Bzip2 uses a large amount of memory. For modern kernels you
152 will need at least 8MB RAM or more for booting.
156 depends on HAVE_KERNEL_LZMA
158 This compression algorithm's ratio is best. Decompression speed
159 is between gzip and bzip2. Compression is slowest.
160 The kernel size is about 33% smaller with LZMA in comparison to gzip.
164 depends on HAVE_KERNEL_XZ
166 XZ uses the LZMA2 algorithm and instruction set specific
167 BCJ filters which can improve compression ratio of executable
168 code. The size of the kernel is about 30% smaller with XZ in
169 comparison to gzip. On architectures for which there is a BCJ
170 filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
171 will create a few percent smaller kernel than plain LZMA.
173 The speed is about the same as with LZMA: The decompression
174 speed of XZ is better than that of bzip2 but worse than gzip
175 and LZO. Compression is slow.
179 depends on HAVE_KERNEL_LZO
181 Its compression ratio is the poorest among the choices. The kernel
182 size is about 10% bigger than gzip; however its speed
183 (both compression and decompression) is the fastest.
187 config DEFAULT_HOSTNAME
188 string "Default hostname"
191 This option determines the default system hostname before userspace
192 calls sethostname(2). The kernel traditionally uses "(none)" here,
193 but you may wish to use a different default here to make a minimal
194 system more usable with less configuration.
197 bool "Support for paging of anonymous memory (swap)"
198 depends on MMU && BLOCK
201 This option allows you to choose whether you want to have support
202 for so called swap devices or swap files in your kernel that are
203 used to provide more virtual memory than the actual RAM present
204 in your computer. If unsure say Y.
209 Inter Process Communication is a suite of library functions and
210 system calls which let processes (running programs) synchronize and
211 exchange information. It is generally considered to be a good thing,
212 and some programs won't run unless you say Y here. In particular, if
213 you want to run the DOS emulator dosemu under Linux (read the
214 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
215 you'll need to say Y here.
217 You can find documentation about IPC with "info ipc" and also in
218 section 6.4 of the Linux Programmer's Guide, available from
219 <http://www.tldp.org/guides.html>.
221 config SYSVIPC_SYSCTL
228 bool "POSIX Message Queues"
231 POSIX variant of message queues is a part of IPC. In POSIX message
232 queues every message has a priority which decides about succession
233 of receiving it by a process. If you want to compile and run
234 programs written e.g. for Solaris with use of its POSIX message
235 queues (functions mq_*) say Y here.
237 POSIX message queues are visible as a filesystem called 'mqueue'
238 and can be mounted somewhere if you want to do filesystem
239 operations on message queues.
243 config POSIX_MQUEUE_SYSCTL
245 depends on POSIX_MQUEUE
250 bool "open by fhandle syscalls"
253 If you say Y here, a user level program will be able to map
254 file names to handle and then later use the handle for
255 different file system operations. This is useful in implementing
256 userspace file servers, which now track files using handles instead
257 of names. The handle would remain the same even if file names
258 get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
262 bool "Auditing support"
265 Enable auditing infrastructure that can be used with another
266 kernel subsystem, such as SELinux (which requires this for
267 logging of avc messages output). Does not do system-call
268 auditing without CONFIG_AUDITSYSCALL.
271 bool "Enable system-call auditing support"
272 depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
273 default y if SECURITY_SELINUX
275 Enable low-overhead system-call auditing infrastructure that
276 can be used independently or with another kernel subsystem,
281 depends on AUDITSYSCALL
286 depends on AUDITSYSCALL
289 config AUDIT_LOGINUID_IMMUTABLE
290 bool "Make audit loginuid immutable"
293 The config option toggles if a task setting its loginuid requires
294 CAP_SYS_AUDITCONTROL or if that task should require no special permissions
295 but should instead only allow setting its loginuid if it was never
296 previously set. On systems which use systemd or a similar central
297 process to restart login services this should be set to true. On older
298 systems in which an admin would typically have to directly stop and
299 start processes this should be set to false. Setting this to true allows
300 one to drop potentially dangerous capabilites from the login tasks,
301 but may not be backwards compatible with older init systems.
303 source "kernel/irq/Kconfig"
304 source "kernel/time/Kconfig"
306 menu "CPU/Task time and stats accounting"
308 config VIRT_CPU_ACCOUNTING
312 prompt "Cputime accounting"
313 default TICK_CPU_ACCOUNTING if !PPC64
314 default VIRT_CPU_ACCOUNTING_NATIVE if PPC64
316 # Kind of a stub config for the pure tick based cputime accounting
317 config TICK_CPU_ACCOUNTING
318 bool "Simple tick based cputime accounting"
319 depends on !S390 && !NO_HZ_FULL
321 This is the basic tick based cputime accounting that maintains
322 statistics about user, system and idle time spent on per jiffies
327 config VIRT_CPU_ACCOUNTING_NATIVE
328 bool "Deterministic task and CPU time accounting"
329 depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
330 select VIRT_CPU_ACCOUNTING
332 Select this option to enable more accurate task and CPU time
333 accounting. This is done by reading a CPU counter on each
334 kernel entry and exit and on transitions within the kernel
335 between system, softirq and hardirq state, so there is a
336 small performance impact. In the case of s390 or IBM POWER > 5,
337 this also enables accounting of stolen time on logically-partitioned
340 config VIRT_CPU_ACCOUNTING_GEN
341 bool "Full dynticks CPU time accounting"
342 depends on HAVE_CONTEXT_TRACKING && 64BIT
343 select VIRT_CPU_ACCOUNTING
344 select CONTEXT_TRACKING
346 Select this option to enable task and CPU time accounting on full
347 dynticks systems. This accounting is implemented by watching every
348 kernel-user boundaries using the context tracking subsystem.
349 The accounting is thus performed at the expense of some significant
352 For now this is only useful if you are working on the full
353 dynticks subsystem development.
357 config IRQ_TIME_ACCOUNTING
358 bool "Fine granularity task level IRQ time accounting"
359 depends on HAVE_IRQ_TIME_ACCOUNTING && !NO_HZ_FULL
361 Select this option to enable fine granularity task irq time
362 accounting. This is done by reading a timestamp on each
363 transitions between softirq and hardirq state, so there can be a
364 small performance impact.
366 If in doubt, say N here.
370 config BSD_PROCESS_ACCT
371 bool "BSD Process Accounting"
373 If you say Y here, a user level program will be able to instruct the
374 kernel (via a special system call) to write process accounting
375 information to a file: whenever a process exits, information about
376 that process will be appended to the file by the kernel. The
377 information includes things such as creation time, owning user,
378 command name, memory usage, controlling terminal etc. (the complete
379 list is in the struct acct in <file:include/linux/acct.h>). It is
380 up to the user level program to do useful things with this
381 information. This is generally a good idea, so say Y.
383 config BSD_PROCESS_ACCT_V3
384 bool "BSD Process Accounting version 3 file format"
385 depends on BSD_PROCESS_ACCT
388 If you say Y here, the process accounting information is written
389 in a new file format that also logs the process IDs of each
390 process and it's parent. Note that this file format is incompatible
391 with previous v0/v1/v2 file formats, so you will need updated tools
392 for processing it. A preliminary version of these tools is available
393 at <http://www.gnu.org/software/acct/>.
396 bool "Export task/process statistics through netlink"
400 Export selected statistics for tasks/processes through the
401 generic netlink interface. Unlike BSD process accounting, the
402 statistics are available during the lifetime of tasks/processes as
403 responses to commands. Like BSD accounting, they are sent to user
408 config TASK_DELAY_ACCT
409 bool "Enable per-task delay accounting"
412 Collect information on time spent by a task waiting for system
413 resources like cpu, synchronous block I/O completion and swapping
414 in pages. Such statistics can help in setting a task's priorities
415 relative to other tasks for cpu, io, rss limits etc.
420 bool "Enable extended accounting over taskstats"
423 Collect extended task accounting data and send the data
424 to userland for processing over the taskstats interface.
428 config TASK_IO_ACCOUNTING
429 bool "Enable per-task storage I/O accounting"
430 depends on TASK_XACCT
432 Collect information on the number of bytes of storage I/O which this
437 endmenu # "CPU/Task time and stats accounting"
442 prompt "RCU Implementation"
446 bool "Tree-based hierarchical RCU"
447 depends on !PREEMPT && SMP
450 This option selects the RCU implementation that is
451 designed for very large SMP system with hundreds or
452 thousands of CPUs. It also scales down nicely to
455 config TREE_PREEMPT_RCU
456 bool "Preemptible tree-based hierarchical RCU"
459 This option selects the RCU implementation that is
460 designed for very large SMP systems with hundreds or
461 thousands of CPUs, but for which real-time response
462 is also required. It also scales down nicely to
465 Select this option if you are unsure.
468 bool "UP-only small-memory-footprint RCU"
469 depends on !PREEMPT && !SMP
471 This option selects the RCU implementation that is
472 designed for UP systems from which real-time response
473 is not required. This option greatly reduces the
474 memory footprint of RCU.
479 def_bool TREE_PREEMPT_RCU
481 This option enables preemptible-RCU code that is common between
482 the TREE_PREEMPT_RCU and TINY_PREEMPT_RCU implementations.
484 config RCU_STALL_COMMON
485 def_bool ( TREE_RCU || TREE_PREEMPT_RCU || RCU_TRACE )
487 This option enables RCU CPU stall code that is common between
488 the TINY and TREE variants of RCU. The purpose is to allow
489 the tiny variants to disable RCU CPU stall warnings, while
490 making these warnings mandatory for the tree variants.
492 config CONTEXT_TRACKING
496 bool "Consider userspace as in RCU extended quiescent state"
497 depends on HAVE_CONTEXT_TRACKING && SMP
498 select CONTEXT_TRACKING
500 This option sets hooks on kernel / userspace boundaries and
501 puts RCU in extended quiescent state when the CPU runs in
502 userspace. It means that when a CPU runs in userspace, it is
503 excluded from the global RCU state machine and thus doesn't
504 try to keep the timer tick on for RCU.
506 Unless you want to hack and help the development of the full
507 dynticks mode, you shouldn't enable this option. It also
508 adds unnecessary overhead.
512 config CONTEXT_TRACKING_FORCE
513 bool "Force context tracking"
514 depends on CONTEXT_TRACKING
515 default CONTEXT_TRACKING
517 Probe on user/kernel boundaries by default in order to
518 test the features that rely on it such as userspace RCU extended
520 This test is there for debugging until we have a real user like the
524 int "Tree-based hierarchical RCU fanout value"
527 depends on TREE_RCU || TREE_PREEMPT_RCU
531 This option controls the fanout of hierarchical implementations
532 of RCU, allowing RCU to work efficiently on machines with
533 large numbers of CPUs. This value must be at least the fourth
534 root of NR_CPUS, which allows NR_CPUS to be insanely large.
535 The default value of RCU_FANOUT should be used for production
536 systems, but if you are stress-testing the RCU implementation
537 itself, small RCU_FANOUT values allow you to test large-system
538 code paths on small(er) systems.
540 Select a specific number if testing RCU itself.
541 Take the default if unsure.
543 config RCU_FANOUT_LEAF
544 int "Tree-based hierarchical RCU leaf-level fanout value"
545 range 2 RCU_FANOUT if 64BIT
546 range 2 RCU_FANOUT if !64BIT
547 depends on TREE_RCU || TREE_PREEMPT_RCU
550 This option controls the leaf-level fanout of hierarchical
551 implementations of RCU, and allows trading off cache misses
552 against lock contention. Systems that synchronize their
553 scheduling-clock interrupts for energy-efficiency reasons will
554 want the default because the smaller leaf-level fanout keeps
555 lock contention levels acceptably low. Very large systems
556 (hundreds or thousands of CPUs) will instead want to set this
557 value to the maximum value possible in order to reduce the
558 number of cache misses incurred during RCU's grace-period
559 initialization. These systems tend to run CPU-bound, and thus
560 are not helped by synchronized interrupts, and thus tend to
561 skew them, which reduces lock contention enough that large
562 leaf-level fanouts work well.
564 Select a specific number if testing RCU itself.
566 Select the maximum permissible value for large systems.
568 Take the default if unsure.
570 config RCU_FANOUT_EXACT
571 bool "Disable tree-based hierarchical RCU auto-balancing"
572 depends on TREE_RCU || TREE_PREEMPT_RCU
575 This option forces use of the exact RCU_FANOUT value specified,
576 regardless of imbalances in the hierarchy. This is useful for
577 testing RCU itself, and might one day be useful on systems with
578 strong NUMA behavior.
580 Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
584 config RCU_FAST_NO_HZ
585 bool "Accelerate last non-dyntick-idle CPU's grace periods"
586 depends on NO_HZ_COMMON && SMP
589 This option permits CPUs to enter dynticks-idle state even if
590 they have RCU callbacks queued, and prevents RCU from waking
591 these CPUs up more than roughly once every four jiffies (by
592 default, you can adjust this using the rcutree.rcu_idle_gp_delay
593 parameter), thus improving energy efficiency. On the other
594 hand, this option increases the duration of RCU grace periods,
595 for example, slowing down synchronize_rcu().
597 Say Y if energy efficiency is critically important, and you
598 don't care about increased grace-period durations.
600 Say N if you are unsure.
602 config TREE_RCU_TRACE
603 def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
606 This option provides tracing for the TREE_RCU and
607 TREE_PREEMPT_RCU implementations, permitting Makefile to
608 trivially select kernel/rcutree_trace.c.
611 bool "Enable RCU priority boosting"
612 depends on RT_MUTEXES && PREEMPT_RCU
615 This option boosts the priority of preempted RCU readers that
616 block the current preemptible RCU grace period for too long.
617 This option also prevents heavy loads from blocking RCU
618 callback invocation for all flavors of RCU.
620 Say Y here if you are working with real-time apps or heavy loads
621 Say N here if you are unsure.
623 config RCU_BOOST_PRIO
624 int "Real-time priority to boost RCU readers to"
629 This option specifies the real-time priority to which long-term
630 preempted RCU readers are to be boosted. If you are working
631 with a real-time application that has one or more CPU-bound
632 threads running at a real-time priority level, you should set
633 RCU_BOOST_PRIO to a priority higher then the highest-priority
634 real-time CPU-bound thread. The default RCU_BOOST_PRIO value
635 of 1 is appropriate in the common case, which is real-time
636 applications that do not have any CPU-bound threads.
638 Some real-time applications might not have a single real-time
639 thread that saturates a given CPU, but instead might have
640 multiple real-time threads that, taken together, fully utilize
641 that CPU. In this case, you should set RCU_BOOST_PRIO to
642 a priority higher than the lowest-priority thread that is
643 conspiring to prevent the CPU from running any non-real-time
644 tasks. For example, if one thread at priority 10 and another
645 thread at priority 5 are between themselves fully consuming
646 the CPU time on a given CPU, then RCU_BOOST_PRIO should be
647 set to priority 6 or higher.
649 Specify the real-time priority, or take the default if unsure.
651 config RCU_BOOST_DELAY
652 int "Milliseconds to delay boosting after RCU grace-period start"
657 This option specifies the time to wait after the beginning of
658 a given grace period before priority-boosting preempted RCU
659 readers blocking that grace period. Note that any RCU reader
660 blocking an expedited RCU grace period is boosted immediately.
662 Accept the default if unsure.
665 bool "Offload RCU callback processing from boot-selected CPUs"
666 depends on TREE_RCU || TREE_PREEMPT_RCU
669 Use this option to reduce OS jitter for aggressive HPC or
670 real-time workloads. It can also be used to offload RCU
671 callback invocation to energy-efficient CPUs in battery-powered
672 asymmetric multiprocessors.
674 This option offloads callback invocation from the set of
675 CPUs specified at boot time by the rcu_nocbs parameter.
676 For each such CPU, a kthread ("rcuox/N") will be created to
677 invoke callbacks, where the "N" is the CPU being offloaded,
678 and where the "x" is "b" for RCU-bh, "p" for RCU-preempt, and
679 "s" for RCU-sched. Nothing prevents this kthread from running
680 on the specified CPUs, but (1) the kthreads may be preempted
681 between each callback, and (2) affinity or cgroups can be used
682 to force the kthreads to run on whatever set of CPUs is desired.
684 Say Y here if you want to help to debug reduced OS jitter.
685 Say N here if you are unsure.
688 prompt "Build-forced no-CBs CPUs"
689 default RCU_NOCB_CPU_NONE
691 This option allows no-CBs CPUs (whose RCU callbacks are invoked
692 from kthreads rather than from softirq context) to be specified
693 at build time. Additional no-CBs CPUs may be specified by
694 the rcu_nocbs= boot parameter.
696 config RCU_NOCB_CPU_NONE
697 bool "No build_forced no-CBs CPUs"
698 depends on RCU_NOCB_CPU && !NO_HZ_FULL
700 This option does not force any of the CPUs to be no-CBs CPUs.
701 Only CPUs designated by the rcu_nocbs= boot parameter will be
702 no-CBs CPUs, whose RCU callbacks will be invoked by per-CPU
703 kthreads whose names begin with "rcuo". All other CPUs will
704 invoke their own RCU callbacks in softirq context.
706 Select this option if you want to choose no-CBs CPUs at
707 boot time, for example, to allow testing of different no-CBs
708 configurations without having to rebuild the kernel each time.
710 config RCU_NOCB_CPU_ZERO
711 bool "CPU 0 is a build_forced no-CBs CPU"
712 depends on RCU_NOCB_CPU && !NO_HZ_FULL
714 This option forces CPU 0 to be a no-CBs CPU, so that its RCU
715 callbacks are invoked by a per-CPU kthread whose name begins
716 with "rcuo". Additional CPUs may be designated as no-CBs
717 CPUs using the rcu_nocbs= boot parameter will be no-CBs CPUs.
718 All other CPUs will invoke their own RCU callbacks in softirq
721 Select this if CPU 0 needs to be a no-CBs CPU for real-time
722 or energy-efficiency reasons, but the real reason it exists
723 is to ensure that randconfig testing covers mixed systems.
725 config RCU_NOCB_CPU_ALL
726 bool "All CPUs are build_forced no-CBs CPUs"
727 depends on RCU_NOCB_CPU
729 This option forces all CPUs to be no-CBs CPUs. The rcu_nocbs=
730 boot parameter will be ignored. All CPUs' RCU callbacks will
731 be executed in the context of per-CPU rcuo kthreads created for
732 this purpose. Assuming that the kthreads whose names start with
733 "rcuo" are bound to "housekeeping" CPUs, this reduces OS jitter
734 on the remaining CPUs, but might decrease memory locality during
735 RCU-callback invocation, thus potentially degrading throughput.
737 Select this if all CPUs need to be no-CBs CPUs for real-time
738 or energy-efficiency reasons.
742 endmenu # "RCU Subsystem"
745 tristate "Kernel .config support"
747 This option enables the complete Linux kernel ".config" file
748 contents to be saved in the kernel. It provides documentation
749 of which kernel options are used in a running kernel or in an
750 on-disk kernel. This information can be extracted from the kernel
751 image file with the script scripts/extract-ikconfig and used as
752 input to rebuild the current kernel or to build another kernel.
753 It can also be extracted from a running kernel by reading
754 /proc/config.gz if enabled (below).
757 bool "Enable access to .config through /proc/config.gz"
758 depends on IKCONFIG && PROC_FS
760 This option enables access to the kernel configuration file
761 through /proc/config.gz.
764 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
768 Select kernel log buffer size as a power of 2.
778 # Architectures with an unreliable sched_clock() should select this:
780 config HAVE_UNSTABLE_SCHED_CLOCK
783 config GENERIC_SCHED_CLOCK
787 # For architectures that want to enable the support for NUMA-affine scheduler
790 config ARCH_SUPPORTS_NUMA_BALANCING
793 # For architectures that (ab)use NUMA to represent different memory regions
794 # all cpu-local but of different latencies, such as SuperH.
796 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
800 # For architectures that are willing to define _PAGE_NUMA as _PAGE_PROTNONE
801 config ARCH_WANTS_PROT_NUMA_PROT_NONE
804 config ARCH_USES_NUMA_PROT_NONE
807 depends on ARCH_WANTS_PROT_NUMA_PROT_NONE
808 depends on NUMA_BALANCING
810 config NUMA_BALANCING_DEFAULT_ENABLED
811 bool "Automatically enable NUMA aware memory/task placement"
813 depends on NUMA_BALANCING
815 If set, autonumic NUMA balancing will be enabled if running on a NUMA
818 config NUMA_BALANCING
819 bool "Memory placement aware NUMA scheduler"
820 depends on ARCH_SUPPORTS_NUMA_BALANCING
821 depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
822 depends on SMP && NUMA && MIGRATION
824 This option adds support for automatic NUMA aware memory/task placement.
825 The mechanism is quite primitive and is based on migrating memory when
826 it is references to the node the task is running on.
828 This system will be inactive on UMA systems.
831 boolean "Control Group support"
834 This option adds support for grouping sets of processes together, for
835 use with process control subsystems such as Cpusets, CFS, memory
836 controls or device isolation.
838 - Documentation/scheduler/sched-design-CFS.txt (CFS)
839 - Documentation/cgroups/ (features for grouping, isolation
840 and resource control)
847 bool "Example debug cgroup subsystem"
850 This option enables a simple cgroup subsystem that
851 exports useful debugging information about the cgroups
856 config CGROUP_FREEZER
857 bool "Freezer cgroup subsystem"
859 Provides a way to freeze and unfreeze all tasks in a
863 bool "Device controller for cgroups"
865 Provides a cgroup implementing whitelists for devices which
866 a process in the cgroup can mknod or open.
869 bool "Cpuset support"
871 This option will let you create and manage CPUSETs which
872 allow dynamically partitioning a system into sets of CPUs and
873 Memory Nodes and assigning tasks to run only within those sets.
874 This is primarily useful on large SMP or NUMA systems.
878 config PROC_PID_CPUSET
879 bool "Include legacy /proc/<pid>/cpuset file"
883 config CGROUP_CPUACCT
884 bool "Simple CPU accounting cgroup subsystem"
886 Provides a simple Resource Controller for monitoring the
887 total CPU consumed by the tasks in a cgroup.
889 config RESOURCE_COUNTERS
890 bool "Resource counters"
892 This option enables controller independent resource accounting
893 infrastructure that works with cgroups.
896 bool "Memory Resource Controller for Control Groups"
897 depends on RESOURCE_COUNTERS
900 Provides a memory resource controller that manages both anonymous
901 memory and page cache. (See Documentation/cgroups/memory.txt)
903 Note that setting this option increases fixed memory overhead
904 associated with each page of memory in the system. By this,
905 8(16)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
906 usage tracking struct at boot. Total amount of this is printed out
909 Only enable when you're ok with these trade offs and really
910 sure you need the memory resource controller. Even when you enable
911 this, you can set "cgroup_disable=memory" at your boot option to
912 disable memory resource controller and you can avoid overheads.
913 (and lose benefits of memory resource controller)
915 This config option also selects MM_OWNER config option, which
916 could in turn add some fork/exit overhead.
919 bool "Memory Resource Controller Swap Extension"
920 depends on MEMCG && SWAP
922 Add swap management feature to memory resource controller. When you
923 enable this, you can limit mem+swap usage per cgroup. In other words,
924 when you disable this, memory resource controller has no cares to
925 usage of swap...a process can exhaust all of the swap. This extension
926 is useful when you want to avoid exhaustion swap but this itself
927 adds more overheads and consumes memory for remembering information.
928 Especially if you use 32bit system or small memory system, please
929 be careful about enabling this. When memory resource controller
930 is disabled by boot option, this will be automatically disabled and
931 there will be no overhead from this. Even when you set this config=y,
932 if boot option "swapaccount=0" is set, swap will not be accounted.
933 Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
934 size is 4096bytes, 512k per 1Gbytes of swap.
935 config MEMCG_SWAP_ENABLED
936 bool "Memory Resource Controller Swap Extension enabled by default"
937 depends on MEMCG_SWAP
940 Memory Resource Controller Swap Extension comes with its price in
941 a bigger memory consumption. General purpose distribution kernels
942 which want to enable the feature but keep it disabled by default
943 and let the user enable it by swapaccount boot command line
944 parameter should have this option unselected.
945 For those who want to have the feature enabled by default should
946 select this option (if, for some reason, they need to disable it
947 then swapaccount=0 does the trick).
949 bool "Memory Resource Controller Kernel Memory accounting"
951 depends on SLUB || SLAB
953 The Kernel Memory extension for Memory Resource Controller can limit
954 the amount of memory used by kernel objects in the system. Those are
955 fundamentally different from the entities handled by the standard
956 Memory Controller, which are page-based, and can be swapped. Users of
957 the kmem extension can use it to guarantee that no group of processes
958 will ever exhaust kernel resources alone.
960 config CGROUP_HUGETLB
961 bool "HugeTLB Resource Controller for Control Groups"
962 depends on RESOURCE_COUNTERS && HUGETLB_PAGE
965 Provides a cgroup Resource Controller for HugeTLB pages.
966 When you enable this, you can put a per cgroup limit on HugeTLB usage.
967 The limit is enforced during page fault. Since HugeTLB doesn't
968 support page reclaim, enforcing the limit at page fault time implies
969 that, the application will get SIGBUS signal if it tries to access
970 HugeTLB pages beyond its limit. This requires the application to know
971 beforehand how much HugeTLB pages it would require for its use. The
972 control group is tracked in the third page lru pointer. This means
973 that we cannot use the controller with huge page less than 3 pages.
976 bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
977 depends on PERF_EVENTS && CGROUPS
979 This option extends the per-cpu mode to restrict monitoring to
980 threads which belong to the cgroup specified and run on the
985 menuconfig CGROUP_SCHED
986 bool "Group CPU scheduler"
989 This feature lets CPU scheduler recognize task groups and control CPU
990 bandwidth allocation to such task groups. It uses cgroups to group
994 config FAIR_GROUP_SCHED
995 bool "Group scheduling for SCHED_OTHER"
996 depends on CGROUP_SCHED
1000 bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
1001 depends on FAIR_GROUP_SCHED
1004 This option allows users to define CPU bandwidth rates (limits) for
1005 tasks running within the fair group scheduler. Groups with no limit
1006 set are considered to be unconstrained and will run with no
1008 See tip/Documentation/scheduler/sched-bwc.txt for more information.
1010 config RT_GROUP_SCHED
1011 bool "Group scheduling for SCHED_RR/FIFO"
1012 depends on CGROUP_SCHED
1015 This feature lets you explicitly allocate real CPU bandwidth
1016 to task groups. If enabled, it will also make it impossible to
1017 schedule realtime tasks for non-root users until you allocate
1018 realtime bandwidth for them.
1019 See Documentation/scheduler/sched-rt-group.txt for more information.
1024 bool "Block IO controller"
1028 Generic block IO controller cgroup interface. This is the common
1029 cgroup interface which should be used by various IO controlling
1032 Currently, CFQ IO scheduler uses it to recognize task groups and
1033 control disk bandwidth allocation (proportional time slice allocation)
1034 to such task groups. It is also used by bio throttling logic in
1035 block layer to implement upper limit in IO rates on a device.
1037 This option only enables generic Block IO controller infrastructure.
1038 One needs to also enable actual IO controlling logic/policy. For
1039 enabling proportional weight division of disk bandwidth in CFQ, set
1040 CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
1041 CONFIG_BLK_DEV_THROTTLING=y.
1043 See Documentation/cgroups/blkio-controller.txt for more information.
1045 config DEBUG_BLK_CGROUP
1046 bool "Enable Block IO controller debugging"
1047 depends on BLK_CGROUP
1050 Enable some debugging help. Currently it exports additional stat
1051 files in a cgroup which can be useful for debugging.
1055 config CHECKPOINT_RESTORE
1056 bool "Checkpoint/restore support" if EXPERT
1059 Enables additional kernel features in a sake of checkpoint/restore.
1060 In particular it adds auxiliary prctl codes to setup process text,
1061 data and heap segment sizes, and a few additional /proc filesystem
1064 If unsure, say N here.
1066 menuconfig NAMESPACES
1067 bool "Namespaces support" if EXPERT
1070 Provides the way to make tasks work with different objects using
1071 the same id. For example same IPC id may refer to different objects
1072 or same user id or pid may refer to different tasks when used in
1073 different namespaces.
1078 bool "UTS namespace"
1081 In this namespace tasks see different info provided with the
1085 bool "IPC namespace"
1086 depends on (SYSVIPC || POSIX_MQUEUE)
1089 In this namespace tasks work with IPC ids which correspond to
1090 different IPC objects in different namespaces.
1093 bool "User namespace"
1094 depends on UIDGID_CONVERTED
1095 select UIDGID_STRICT_TYPE_CHECKS
1099 This allows containers, i.e. vservers, to use user namespaces
1100 to provide different user info for different servers.
1102 When user namespaces are enabled in the kernel it is
1103 recommended that the MEMCG and MEMCG_KMEM options also be
1104 enabled and that user-space use the memory control groups to
1105 limit the amount of memory a memory unprivileged users can
1111 bool "PID Namespaces"
1114 Support process id namespaces. This allows having multiple
1115 processes with the same pid as long as they are in different
1116 pid namespaces. This is a building block of containers.
1119 bool "Network namespace"
1123 Allow user space to create what appear to be multiple instances
1124 of the network stack.
1128 config UIDGID_CONVERTED
1129 # True if all of the selected software conmponents are known
1130 # to have uid_t and gid_t converted to kuid_t and kgid_t
1131 # where appropriate and are otherwise safe to use with
1132 # the user namespace.
1137 depends on XFS_FS = n
1139 config UIDGID_STRICT_TYPE_CHECKS
1140 bool "Require conversions between uid/gids and their internal representation"
1141 depends on UIDGID_CONVERTED
1144 While the nececessary conversions are being added to all subsystems this option allows
1145 the code to continue to build for unconverted subsystems.
1147 Say Y here if you want the strict type checking enabled
1149 config SCHED_AUTOGROUP
1150 bool "Automatic process group scheduling"
1154 select FAIR_GROUP_SCHED
1156 This option optimizes the scheduler for common desktop workloads by
1157 automatically creating and populating task groups. This separation
1158 of workloads isolates aggressive CPU burners (like build jobs) from
1159 desktop applications. Task group autogeneration is currently based
1165 config SYSFS_DEPRECATED
1166 bool "Enable deprecated sysfs features to support old userspace tools"
1170 This option adds code that switches the layout of the "block" class
1171 devices, to not show up in /sys/class/block/, but only in
1174 This switch is only active when the sysfs.deprecated=1 boot option is
1175 passed or the SYSFS_DEPRECATED_V2 option is set.
1177 This option allows new kernels to run on old distributions and tools,
1178 which might get confused by /sys/class/block/. Since 2007/2008 all
1179 major distributions and tools handle this just fine.
1181 Recent distributions and userspace tools after 2009/2010 depend on
1182 the existence of /sys/class/block/, and will not work with this
1185 Only if you are using a new kernel on an old distribution, you might
1188 config SYSFS_DEPRECATED_V2
1189 bool "Enable deprecated sysfs features by default"
1192 depends on SYSFS_DEPRECATED
1194 Enable deprecated sysfs by default.
1196 See the CONFIG_SYSFS_DEPRECATED option for more details about this
1199 Only if you are using a new kernel on an old distribution, you might
1200 need to say Y here. Even then, odds are you would not need it
1201 enabled, you can always pass the boot option if absolutely necessary.
1204 bool "Kernel->user space relay support (formerly relayfs)"
1206 This option enables support for relay interface support in
1207 certain file systems (such as debugfs).
1208 It is designed to provide an efficient mechanism for tools and
1209 facilities to relay large amounts of data from kernel space to
1214 config BLK_DEV_INITRD
1215 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
1216 depends on BROKEN || !FRV
1218 The initial RAM filesystem is a ramfs which is loaded by the
1219 boot loader (loadlin or lilo) and that is mounted as root
1220 before the normal boot procedure. It is typically used to
1221 load modules needed to mount the "real" root file system,
1222 etc. See <file:Documentation/initrd.txt> for details.
1224 If RAM disk support (BLK_DEV_RAM) is also included, this
1225 also enables initial RAM disk (initrd) support and adds
1226 15 Kbytes (more on some other architectures) to the kernel size.
1232 source "usr/Kconfig"
1236 config CC_OPTIMIZE_FOR_SIZE
1237 bool "Optimize for size"
1239 Enabling this option will pass "-Os" instead of "-O2" to gcc
1240 resulting in a smaller kernel.
1253 config SYSCTL_EXCEPTION_TRACE
1256 Enable support for /proc/sys/debug/exception-trace.
1258 config SYSCTL_ARCH_UNALIGN_NO_WARN
1261 Enable support for /proc/sys/kernel/ignore-unaligned-usertrap
1262 Allows arch to define/use @no_unaligned_warning to possibly warn
1263 about unaligned access emulation going on under the hood.
1265 config SYSCTL_ARCH_UNALIGN_ALLOW
1268 Enable support for /proc/sys/kernel/unaligned-trap
1269 Allows arches to define/use @unaligned_enabled to runtime toggle
1270 the unaligned access emulation.
1271 see arch/parisc/kernel/unaligned.c for reference
1273 config HAVE_PCSPKR_PLATFORM
1277 bool "Configure standard kernel features (expert users)"
1278 # Unhide debug options, to make the on-by-default options visible
1281 This option allows certain base kernel options and settings
1282 to be disabled or tweaked. This is for specialized
1283 environments which can tolerate a "non-standard" kernel.
1284 Only use this if you really know what you are doing.
1287 bool "Enable 16-bit UID system calls" if EXPERT
1288 depends on HAVE_UID16
1291 This enables the legacy 16-bit UID syscall wrappers.
1293 config SYSCTL_SYSCALL
1294 bool "Sysctl syscall support" if EXPERT
1295 depends on PROC_SYSCTL
1299 sys_sysctl uses binary paths that have been found challenging
1300 to properly maintain and use. The interface in /proc/sys
1301 using paths with ascii names is now the primary path to this
1304 Almost nothing using the binary sysctl interface so if you are
1305 trying to save some space it is probably safe to disable this,
1306 making your kernel marginally smaller.
1308 If unsure say N here.
1311 bool "Load all symbols for debugging/ksymoops" if EXPERT
1314 Say Y here to let the kernel print out symbolic crash information and
1315 symbolic stack backtraces. This increases the size of the kernel
1316 somewhat, as all symbols have to be loaded into the kernel image.
1319 bool "Include all symbols in kallsyms"
1320 depends on DEBUG_KERNEL && KALLSYMS
1322 Normally kallsyms only contains the symbols of functions for nicer
1323 OOPS messages and backtraces (i.e., symbols from the text and inittext
1324 sections). This is sufficient for most cases. And only in very rare
1325 cases (e.g., when a debugger is used) all symbols are required (e.g.,
1326 names of variables from the data sections, etc).
1328 This option makes sure that all symbols are loaded into the kernel
1329 image (i.e., symbols from all sections) in cost of increased kernel
1330 size (depending on the kernel configuration, it may be 300KiB or
1331 something like this).
1333 Say N unless you really need all symbols.
1337 bool "Enable support for printk" if EXPERT
1340 This option enables normal printk support. Removing it
1341 eliminates most of the message strings from the kernel image
1342 and makes the kernel more or less silent. As this makes it
1343 very difficult to diagnose system problems, saying N here is
1344 strongly discouraged.
1347 bool "BUG() support" if EXPERT
1350 Disabling this option eliminates support for BUG and WARN, reducing
1351 the size of your kernel image and potentially quietly ignoring
1352 numerous fatal conditions. You should only consider disabling this
1353 option for embedded systems with no facilities for reporting errors.
1359 bool "Enable ELF core dumps" if EXPERT
1361 Enable support for generating core dumps. Disabling saves about 4k.
1364 config PCSPKR_PLATFORM
1365 bool "Enable PC-Speaker support" if EXPERT
1366 depends on HAVE_PCSPKR_PLATFORM
1370 This option allows to disable the internal PC-Speaker
1371 support, saving some memory.
1375 bool "Enable full-sized data structures for core" if EXPERT
1377 Disabling this option reduces the size of miscellaneous core
1378 kernel data structures. This saves memory on small machines,
1379 but may reduce performance.
1382 bool "Enable futex support" if EXPERT
1386 Disabling this option will cause the kernel to be built without
1387 support for "fast userspace mutexes". The resulting kernel may not
1388 run glibc-based applications correctly.
1391 bool "Enable eventpoll support" if EXPERT
1395 Disabling this option will cause the kernel to be built without
1396 support for epoll family of system calls.
1399 bool "Enable signalfd() system call" if EXPERT
1403 Enable the signalfd() system call that allows to receive signals
1404 on a file descriptor.
1409 bool "Enable timerfd() system call" if EXPERT
1413 Enable the timerfd() system call that allows to receive timer
1414 events on a file descriptor.
1419 bool "Enable eventfd() system call" if EXPERT
1423 Enable the eventfd() system call that allows to receive both
1424 kernel notification (ie. KAIO) or userspace notifications.
1429 bool "Use full shmem filesystem" if EXPERT
1433 The shmem is an internal filesystem used to manage shared memory.
1434 It is backed by swap and manages resource limits. It is also exported
1435 to userspace as tmpfs if TMPFS is enabled. Disabling this
1436 option replaces shmem and tmpfs with the much simpler ramfs code,
1437 which may be appropriate on small systems without swap.
1440 bool "Enable AIO support" if EXPERT
1443 This option enables POSIX asynchronous I/O which may by used
1444 by some high performance threaded applications. Disabling
1445 this option saves about 7k.
1449 bool "Enable PCI quirk workarounds" if EXPERT
1452 This enables workarounds for various PCI chipset
1453 bugs/quirks. Disable this only if your target machine is
1454 unaffected by PCI quirks.
1457 bool "Embedded system"
1460 This option should be enabled if compiling the kernel for
1461 an embedded system so certain expert options are available
1464 config HAVE_PERF_EVENTS
1467 See tools/perf/design.txt for details.
1469 config PERF_USE_VMALLOC
1472 See tools/perf/design.txt for details
1474 menu "Kernel Performance Events And Counters"
1477 bool "Kernel performance events and counters"
1478 default y if PROFILING
1479 depends on HAVE_PERF_EVENTS
1483 Enable kernel support for various performance events provided
1484 by software and hardware.
1486 Software events are supported either built-in or via the
1487 use of generic tracepoints.
1489 Most modern CPUs support performance events via performance
1490 counter registers. These registers count the number of certain
1491 types of hw events: such as instructions executed, cachemisses
1492 suffered, or branches mis-predicted - without slowing down the
1493 kernel or applications. These registers can also trigger interrupts
1494 when a threshold number of events have passed - and can thus be
1495 used to profile the code that runs on that CPU.
1497 The Linux Performance Event subsystem provides an abstraction of
1498 these software and hardware event capabilities, available via a
1499 system call and used by the "perf" utility in tools/perf/. It
1500 provides per task and per CPU counters, and it provides event
1501 capabilities on top of those.
1505 config DEBUG_PERF_USE_VMALLOC
1507 bool "Debug: use vmalloc to back perf mmap() buffers"
1508 depends on PERF_EVENTS && DEBUG_KERNEL
1509 select PERF_USE_VMALLOC
1511 Use vmalloc memory to back perf mmap() buffers.
1513 Mostly useful for debugging the vmalloc code on platforms
1514 that don't require it.
1520 config VM_EVENT_COUNTERS
1522 bool "Enable VM event counters for /proc/vmstat" if EXPERT
1524 VM event counters are needed for event counts to be shown.
1525 This option allows the disabling of the VM event counters
1526 on EXPERT systems. /proc/vmstat will only show page counts
1527 if VM event counters are disabled.
1531 bool "Enable SLUB debugging support" if EXPERT
1532 depends on SLUB && SYSFS
1534 SLUB has extensive debug support features. Disabling these can
1535 result in significant savings in code size. This also disables
1536 SLUB sysfs support. /sys/slab will not exist and there will be
1537 no support for cache validation etc.
1540 bool "Disable heap randomization"
1543 Randomizing heap placement makes heap exploits harder, but it
1544 also breaks ancient binaries (including anything libc5 based).
1545 This option changes the bootup default to heap randomization
1546 disabled, and can be overridden at runtime by setting
1547 /proc/sys/kernel/randomize_va_space to 2.
1549 On non-ancient distros (post-2000 ones) N is usually a safe choice.
1552 prompt "Choose SLAB allocator"
1555 This option allows to select a slab allocator.
1560 The regular slab allocator that is established and known to work
1561 well in all environments. It organizes cache hot objects in
1562 per cpu and per node queues.
1565 bool "SLUB (Unqueued Allocator)"
1567 SLUB is a slab allocator that minimizes cache line usage
1568 instead of managing queues of cached objects (SLAB approach).
1569 Per cpu caching is realized using slabs of objects instead
1570 of queues of objects. SLUB can use memory efficiently
1571 and has enhanced diagnostics. SLUB is the default choice for
1576 bool "SLOB (Simple Allocator)"
1578 SLOB replaces the stock allocator with a drastically simpler
1579 allocator. SLOB is generally more space efficient but
1580 does not perform as well on large systems.
1584 config MMAP_ALLOW_UNINITIALIZED
1585 bool "Allow mmapped anonymous memory to be uninitialized"
1586 depends on EXPERT && !MMU
1589 Normally, and according to the Linux spec, anonymous memory obtained
1590 from mmap() has it's contents cleared before it is passed to
1591 userspace. Enabling this config option allows you to request that
1592 mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
1593 providing a huge performance boost. If this option is not enabled,
1594 then the flag will be ignored.
1596 This is taken advantage of by uClibc's malloc(), and also by
1597 ELF-FDPIC binfmt's brk and stack allocator.
1599 Because of the obvious security issues, this option should only be
1600 enabled on embedded devices where you control what is run in
1601 userspace. Since that isn't generally a problem on no-MMU systems,
1602 it is normally safe to say Y here.
1604 See Documentation/nommu-mmap.txt for more information.
1607 bool "Profiling support"
1609 Say Y here to enable the extended profiling support mechanisms used
1610 by profilers such as OProfile.
1613 # Place an empty function call at each tracepoint site. Can be
1614 # dynamically changed for a probe function.
1619 source "arch/Kconfig"
1621 endmenu # General setup
1623 config HAVE_GENERIC_DMA_COHERENT
1630 depends on SLAB || SLUB_DEBUG
1638 default 0 if BASE_FULL
1639 default 1 if !BASE_FULL
1642 bool "Enable loadable module support"
1644 Kernel modules are small pieces of compiled code which can
1645 be inserted in the running kernel, rather than being
1646 permanently built into the kernel. You use the "modprobe"
1647 tool to add (and sometimes remove) them. If you say Y here,
1648 many parts of the kernel can be built as modules (by
1649 answering M instead of Y where indicated): this is most
1650 useful for infrequently used options which are not required
1651 for booting. For more information, see the man pages for
1652 modprobe, lsmod, modinfo, insmod and rmmod.
1654 If you say Y here, you will need to run "make
1655 modules_install" to put the modules under /lib/modules/
1656 where modprobe can find them (you may need to be root to do
1663 config MODULE_FORCE_LOAD
1664 bool "Forced module loading"
1667 Allow loading of modules without version information (ie. modprobe
1668 --force). Forced module loading sets the 'F' (forced) taint flag and
1669 is usually a really bad idea.
1671 config MODULE_UNLOAD
1672 bool "Module unloading"
1674 Without this option you will not be able to unload any
1675 modules (note that some modules may not be unloadable
1676 anyway), which makes your kernel smaller, faster
1677 and simpler. If unsure, say Y.
1679 config MODULE_FORCE_UNLOAD
1680 bool "Forced module unloading"
1681 depends on MODULE_UNLOAD
1683 This option allows you to force a module to unload, even if the
1684 kernel believes it is unsafe: the kernel will remove the module
1685 without waiting for anyone to stop using it (using the -f option to
1686 rmmod). This is mainly for kernel developers and desperate users.
1690 bool "Module versioning support"
1692 Usually, you have to use modules compiled with your kernel.
1693 Saying Y here makes it sometimes possible to use modules
1694 compiled for different kernels, by adding enough information
1695 to the modules to (hopefully) spot any changes which would
1696 make them incompatible with the kernel you are running. If
1699 config MODULE_SRCVERSION_ALL
1700 bool "Source checksum for all modules"
1702 Modules which contain a MODULE_VERSION get an extra "srcversion"
1703 field inserted into their modinfo section, which contains a
1704 sum of the source files which made it. This helps maintainers
1705 see exactly which source was used to build a module (since
1706 others sometimes change the module source without updating
1707 the version). With this option, such a "srcversion" field
1708 will be created for all modules. If unsure, say N.
1711 bool "Module signature verification"
1715 select ASYMMETRIC_KEY_TYPE
1716 select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
1717 select PUBLIC_KEY_ALGO_RSA
1720 select X509_CERTIFICATE_PARSER
1722 Check modules for valid signatures upon load: the signature
1723 is simply appended to the module. For more information see
1724 Documentation/module-signing.txt.
1726 !!!WARNING!!! If you enable this option, you MUST make sure that the
1727 module DOES NOT get stripped after being signed. This includes the
1728 debuginfo strip done by some packagers (such as rpmbuild) and
1729 inclusion into an initramfs that wants the module size reduced.
1731 config MODULE_SIG_FORCE
1732 bool "Require modules to be validly signed"
1733 depends on MODULE_SIG
1735 Reject unsigned modules or signed modules for which we don't have a
1736 key. Without this, such modules will simply taint the kernel.
1738 config MODULE_SIG_ALL
1739 bool "Automatically sign all modules"
1741 depends on MODULE_SIG
1743 Sign all modules during make modules_install. Without this option,
1744 modules must be signed manually, using the scripts/sign-file tool.
1746 comment "Do not forget to sign required modules with scripts/sign-file"
1747 depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
1750 prompt "Which hash algorithm should modules be signed with?"
1751 depends on MODULE_SIG
1753 This determines which sort of hashing algorithm will be used during
1754 signature generation. This algorithm _must_ be built into the kernel
1755 directly so that signature verification can take place. It is not
1756 possible to load a signed module containing the algorithm to check
1757 the signature on that module.
1759 config MODULE_SIG_SHA1
1760 bool "Sign modules with SHA-1"
1763 config MODULE_SIG_SHA224
1764 bool "Sign modules with SHA-224"
1765 select CRYPTO_SHA256
1767 config MODULE_SIG_SHA256
1768 bool "Sign modules with SHA-256"
1769 select CRYPTO_SHA256
1771 config MODULE_SIG_SHA384
1772 bool "Sign modules with SHA-384"
1773 select CRYPTO_SHA512
1775 config MODULE_SIG_SHA512
1776 bool "Sign modules with SHA-512"
1777 select CRYPTO_SHA512
1781 config MODULE_SIG_HASH
1783 depends on MODULE_SIG
1784 default "sha1" if MODULE_SIG_SHA1
1785 default "sha224" if MODULE_SIG_SHA224
1786 default "sha256" if MODULE_SIG_SHA256
1787 default "sha384" if MODULE_SIG_SHA384
1788 default "sha512" if MODULE_SIG_SHA512
1792 config INIT_ALL_POSSIBLE
1795 Back when each arch used to define their own cpu_online_mask and
1796 cpu_possible_mask, some of them chose to initialize cpu_possible_mask
1797 with all 1s, and others with all 0s. When they were centralised,
1798 it was better to provide this option than to break all the archs
1799 and have several arch maintainers pursuing me down dark alleys.
1804 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
1806 Need stop_machine() primitive.
1808 source "block/Kconfig"
1810 config PREEMPT_NOTIFIERS
1817 # Can be selected by architectures with broken toolchains
1818 # that get confused by correct const<->read_only section
1820 config BROKEN_RODATA
1826 Build a simple ASN.1 grammar compiler that produces a bytecode output
1827 that can be interpreted by the ASN.1 stream decoder and used to
1828 inform it as to what tags are to be expected in a stream and what
1829 functions to call on what tags.
1831 source "kernel/Kconfig.locks"
projects / cascardo / linux.git / blob