staging: gs_fpgaboot: remove checks for CONFIG_B4860G100

There are two checks for CONFIG_B4860G100 in this driver. But there's no
Kconfig symbol B4860G100. These checks will always evaluate to false.
Remove them and the code they hide.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/gs_fpgaboot/io.c b/drivers/staging/gs_fpgaboot/io.c
index f5cd33b..b260e45 100644 (file)
--- a/drivers/staging/gs_fpgaboot/io.c
+++ b/drivers/staging/gs_fpgaboot/io.c
@@ -31,10 +31,6 @@
 
 #include "io.h"
 
-#ifdef CONFIG_B4860G100
-static struct gpiobus gbus;
-#endif /* CONFIG_B4860G100 */
-
 static inline void byte0_out(unsigned char data);
 static inline void byte1_out(unsigned char data);
 static inline void xl_cclk_b(int32_t i);
@@ -92,163 +88,6 @@ static inline unsigned char bitswap(unsigned char s)
        return d;
 }
 
-#ifdef CONFIG_B4860G100
-/*
- * ======================================================================
- * board specific configuration
- */
-
-static inline void mpc85xx_gpio_set_dir(
-                       int32_t port,
-                       uint32_t mask,
-                       uint32_t dir)
-{
-       dir |= (in_be32(gbus.r[port]+GPDIR) & ~mask);
-       out_be32(gbus.r[port]+GPDIR, dir);
-}
-
-static inline void mpc85xx_gpio_set(int32_t port, uint32_t mask, uint32_t val)
-{
-       /* First mask off the unwanted parts of "dir" and "val" */
-       val &= mask;
-
-       /* Now read in the values we're supposed to preserve */
-       val |= (in_be32(gbus.r[port]+GPDAT) & ~mask);
-
-       out_be32(gbus.r[port]+GPDAT, val);
-}
-
-static inline uint32_t mpc85xx_gpio_get(int32_t port, uint32_t mask)
-{
-       /* Read the requested values */
-       return in_be32(gbus.r[port]+GPDAT) & mask;
-}
-
-static inline void mpc85xx_gpio_set_low(int32_t port, uint32_t gpios)
-{
-       mpc85xx_gpio_set(port, gpios, 0x00000000);
-}
-
-static inline void mpc85xx_gpio_set_high(int32_t port, uint32_t gpios)
-{
-       mpc85xx_gpio_set(port, gpios, 0xFFFFFFFF);
-}
-
-static inline void gpio_set_value(int32_t port, uint32_t gpio, uint32_t value)
-{
-       int32_t g;
-
-       g = 31 - gpio;
-       if (value)
-               mpc85xx_gpio_set_high(port, 1U << g);
-       else
-               mpc85xx_gpio_set_low(port, 1U << g);
-}
-
-static inline int gpio_get_value(int32_t port, uint32_t gpio)
-{
-       int32_t g;
-
-       g = 31 - gpio;
-       return !!mpc85xx_gpio_get(port, 1U << g);
-}
-
-static inline void xl_cclk_b(int32_t i)
-{
-       gpio_set_value(XL_CCLK_PORT, XL_CCLK_PIN, i);
-}
-
-void xl_program_b(int32_t i)
-{
-       gpio_set_value(XL_PROGN_PORT, XL_PROGN_PIN, i);
-}
-
-void xl_rdwr_b(int32_t i)
-{
-       gpio_set_value(XL_RDWRN_PORT, XL_RDWRN_PIN, i);
-}
-
-void xl_csi_b(int32_t i)
-{
-       gpio_set_value(XL_CSIN_PORT, XL_CSIN_PIN, i);
-}
-
-int xl_get_init_b(void)
-{
-       return gpio_get_value(XL_INITN_PORT, XL_INITN_PIN);
-}
-
-int xl_get_done_b(void)
-{
-       return gpio_get_value(XL_DONE_PORT, XL_DONE_PIN);
-}
-
-
-/* G100 specific bit swap and remmap (to gpio pins) for byte 0 */
-static inline uint32_t bit_remap_byte0(uint32_t s)
-{
-       uint32_t d;
-
-       d = (((s&0x80)>>7) | ((s&0x40)>>5) | ((s&0x20)>>3) | ((s&0x10)>>1) |
-               ((s&0x08)<<1) | ((s&0x04)<<3) | ((s&0x02)<<6) | ((s&0x01)<<9));
-       return d;
-}
-
-/*
- * G100 specific MSB, in this order [byte0 | byte1], out
- */
-static inline void byte0_out(unsigned char data)
-{
-       uint32_t swap32;
-
-       swap32 =  bit_remap_byte0((uint32_t) data) << 8;
-
-       mpc85xx_gpio_set(0, 0x0002BF00, (uint32_t) swap32);
-}
-
-/*
- * G100 specific LSB, in this order [byte0 | byte1], out
- */
-static inline void byte1_out(unsigned char data)
-{
-       mpc85xx_gpio_set(0, 0x000000FF, (uint32_t) bitswap(data));
-}
-
-/*
- * configurable per device type for different I/O config
- */
-int xl_init_io(void)
-{
-       struct device_node *np;
-       const u32 *p_reg;
-       int reg, cnt;
-
-       cnt = 0;
-       memset(&gbus, 0, sizeof(struct gpiobus));
-       for_each_compatible_node(np, NULL, "fsl,qoriq-gpio") {
-               p_reg = of_get_property(np, "reg", NULL);
-               if (p_reg == NULL)
-                       break;
-               reg = (int) *p_reg;
-               gbus.r[cnt] = of_iomap(np, 0);
-
-               if (!gbus.r[cnt]) {
-                       pr_err("not findding gpio cell-index %d\n", cnt);
-                       return -ENODEV;
-               }
-               cnt++;
-       }
-       mpc85xx_gpio_set_dir(0, 0x0002BFFF, 0x0002BFFF);
-       mpc85xx_gpio_set_dir(1, 0x00240060, 0x00240060);
-
-       gbus.ngpio = cnt;
-
-       return 0;
-}
-
-
-#else  /* placeholder for boards with different config */
-
 void xl_program_b(int32_t i)
 {
 }
@@ -290,5 +129,3 @@ int xl_init_io(void)
 {
        return -1;
 }
-
-#endif /* CONFIG_B4860G100 */