[media] cxd2820r: add I2C driver bindings
authorAntti Palosaari <crope@iki.fi>
Tue, 9 Aug 2016 23:49:09 +0000 (20:49 -0300)
committerMauro Carvalho Chehab <mchehab@s-opensource.com>
Thu, 22 Sep 2016 13:41:15 +0000 (10:41 -0300)
Add I2C driver bindings in order to support proper I2C driver
registration with driver core.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/dvb-frontends/cxd2820r.h
drivers/media/dvb-frontends/cxd2820r_c.c
drivers/media/dvb-frontends/cxd2820r_core.c
drivers/media/dvb-frontends/cxd2820r_priv.h
drivers/media/dvb-frontends/cxd2820r_t.c
drivers/media/dvb-frontends/cxd2820r_t2.c

index 56d4276..d77afe0 100644 (file)
 #define CXD2820R_TS_PARALLEL      0x30
 #define CXD2820R_TS_PARALLEL_MSB  0x70
 
+/*
+ * I2C address: 0x6c, 0x6d
+ */
+
+/**
+ * struct cxd2820r_platform_data - Platform data for the cxd2820r driver
+ * @ts_mode: TS mode.
+ * @ts_clk_inv: TS clock inverted.
+ * @if_agc_polarity: IF AGC polarity.
+ * @spec_inv: Input spectrum inverted.
+ * @gpio_chip_base: GPIO.
+ * @get_dvb_frontend: Get DVB frontend.
+ */
+
+struct cxd2820r_platform_data {
+       u8 ts_mode;
+       bool ts_clk_inv;
+       bool if_agc_polarity;
+       bool spec_inv;
+       int **gpio_chip_base;
+
+       struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
+/* private: For legacy media attach wrapper. Do not set value. */
+       bool attach_in_use;
+};
+
 struct cxd2820r_config {
        /* Demodulator I2C address.
         * Driver determines DVB-C slave I2C address automatically from master
index 82df944..0d036e1 100644 (file)
@@ -42,9 +42,9 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe)
                { 0x10059, 0x50, 0xff },
                { 0x10087, 0x0c, 0x3c },
                { 0x1008b, 0x07, 0xff },
-               { 0x1001f, priv->cfg.if_agc_polarity << 7, 0x80 },
-               { 0x10070, priv->cfg.ts_mode, 0xff },
-               { 0x10071, !priv->cfg.ts_clock_inv << 4, 0x10 },
+               { 0x1001f, priv->if_agc_polarity << 7, 0x80 },
+               { 0x10070, priv->ts_mode, 0xff },
+               { 0x10071, !priv->ts_clk_inv << 4, 0x10 },
        };
 
        dev_dbg(&priv->i2c->dev, "%s: frequency=%d symbol_rate=%d\n", __func__,
index 66da821..cf5eed4 100644 (file)
@@ -49,7 +49,7 @@ static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
        buf[0] = reg;
        memcpy(&buf[1], val, len);
 
-       ret = i2c_transfer(priv->i2c, msg, 1);
+       ret = i2c_transfer(priv->client[0]->adapter, msg, 1);
        if (ret == 1) {
                ret = 0;
        } else {
@@ -87,7 +87,7 @@ static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
                return -EINVAL;
        }
 
-       ret = i2c_transfer(priv->i2c, msg, 2);
+       ret = i2c_transfer(priv->client[0]->adapter, msg, 2);
        if (ret == 2) {
                memcpy(val, buf, len);
                ret = 0;
@@ -112,9 +112,9 @@ int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
 
        /* select I2C */
        if (i2c)
-               i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */
+               i2c_addr = priv->client[1]->addr; /* DVB-C */
        else
-               i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */
+               i2c_addr = priv->client[0]->addr; /* DVB-T/T2 */
 
        /* switch bank if needed */
        if (bank != priv->bank[i2c]) {
@@ -138,9 +138,9 @@ int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
 
        /* select I2C */
        if (i2c)
-               i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */
+               i2c_addr = priv->client[1]->addr; /* DVB-C */
        else
-               i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */
+               i2c_addr = priv->client[0]->addr; /* DVB-T/T2 */
 
        /* switch bank if needed */
        if (bank != priv->bank[i2c]) {
@@ -537,16 +537,12 @@ static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe)
 static void cxd2820r_release(struct dvb_frontend *fe)
 {
        struct cxd2820r_priv *priv = fe->demodulator_priv;
+       struct i2c_client *client = priv->client[0];
 
        dev_dbg(&priv->i2c->dev, "%s\n", __func__);
 
-#ifdef CONFIG_GPIOLIB
-       /* remove GPIOs */
-       if (priv->gpio_chip.label)
-               gpiochip_remove(&priv->gpio_chip);
+       i2c_unregister_device(client);
 
-#endif
-       kfree(priv);
        return;
 }
 
@@ -646,49 +642,113 @@ static const struct dvb_frontend_ops cxd2820r_ops = {
        .read_signal_strength   = cxd2820r_read_signal_strength,
 };
 
-struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
-               struct i2c_adapter *i2c, int *gpio_chip_base
-)
+/*
+ * XXX: That is wrapper to cxd2820r_probe() via driver core in order to provide
+ * proper I2C client for legacy media attach binding.
+ * New users must use I2C client binding directly!
+ */
+struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *config,
+                                    struct i2c_adapter *adapter,
+                                    int *gpio_chip_base)
 {
+       struct i2c_client *client;
+       struct i2c_board_info board_info;
+       struct cxd2820r_platform_data pdata;
+
+       pdata.ts_mode = config->ts_mode;
+       pdata.ts_clk_inv = config->ts_clock_inv;
+       pdata.if_agc_polarity = config->if_agc_polarity;
+       pdata.spec_inv = config->spec_inv;
+       pdata.gpio_chip_base = &gpio_chip_base;
+       pdata.attach_in_use = true;
+
+       memset(&board_info, 0, sizeof(board_info));
+       strlcpy(board_info.type, "cxd2820r", I2C_NAME_SIZE);
+       board_info.addr = config->i2c_address;
+       board_info.platform_data = &pdata;
+       client = i2c_new_device(adapter, &board_info);
+       if (!client || !client->dev.driver)
+               return NULL;
+
+       return pdata.get_dvb_frontend(client);
+}
+EXPORT_SYMBOL(cxd2820r_attach);
+
+static struct dvb_frontend *cxd2820r_get_dvb_frontend(struct i2c_client *client)
+{
+       struct cxd2820r_priv *priv = i2c_get_clientdata(client);
+
+       dev_dbg(&client->dev, "\n");
+
+       return &priv->fe;
+}
+
+static int cxd2820r_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+       struct cxd2820r_platform_data *pdata = client->dev.platform_data;
        struct cxd2820r_priv *priv;
-       int ret;
-       u8 tmp;
+       int ret, *gpio_chip_base;
+       u8 u8tmp;
 
-       priv = kzalloc(sizeof(struct cxd2820r_priv), GFP_KERNEL);
+       dev_dbg(&client->dev, "\n");
+
+       priv = kzalloc(sizeof(*priv), GFP_KERNEL);
        if (!priv) {
                ret = -ENOMEM;
-               dev_err(&i2c->dev, "%s: kzalloc() failed\n",
-                               KBUILD_MODNAME);
-               goto error;
+               goto err;
        }
 
-       priv->i2c = i2c;
-       memcpy(&priv->cfg, cfg, sizeof(struct cxd2820r_config));
-       memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(struct dvb_frontend_ops));
-       priv->fe.demodulator_priv = priv;
+       priv->client[0] = client;
+       priv->i2c = client->adapter;
+       priv->ts_mode = pdata->ts_mode;
+       priv->ts_clk_inv = pdata->ts_clk_inv;
+       priv->if_agc_polarity = pdata->if_agc_polarity;
+       priv->spec_inv = pdata->spec_inv;
+       priv->bank[0] = 0xff;
+       priv->bank[1] = 0xff;
+       gpio_chip_base = *pdata->gpio_chip_base;
+
+       /* Check demod answers with correct chip id */
+       ret = cxd2820r_rd_reg(priv, 0x000fd, &u8tmp);
+       if (ret)
+               goto err_kfree;
 
-       priv->bank[0] = priv->bank[1] = 0xff;
-       ret = cxd2820r_rd_reg(priv, 0x000fd, &tmp);
-       dev_dbg(&priv->i2c->dev, "%s: chip id=%02x\n", __func__, tmp);
-       if (ret || tmp != 0xe1)
-               goto error;
+       dev_dbg(&client->dev, "chip_id=%02x\n", u8tmp);
+
+       if (u8tmp != 0xe1) {
+               ret = -ENODEV;
+               goto err_kfree;
+       }
+
+       /*
+        * Chip has two I2C addresses for different register banks. We register
+        * one dummy I2C client in in order to get own I2C client for each
+        * register bank.
+        */
+       priv->client[1] = i2c_new_dummy(client->adapter, client->addr | (1 << 1));
+       if (!priv->client[1]) {
+               ret = -ENODEV;
+               dev_err(&client->dev, "I2C registration failed\n");
+               if (ret)
+                       goto err_kfree;
+       }
 
        if (gpio_chip_base) {
 #ifdef CONFIG_GPIOLIB
-               /* add GPIOs */
+               /* Add GPIOs */
                priv->gpio_chip.label = KBUILD_MODNAME;
                priv->gpio_chip.parent = &priv->i2c->dev;
                priv->gpio_chip.owner = THIS_MODULE;
-               priv->gpio_chip.direction_output =
-                               cxd2820r_gpio_direction_output;
+               priv->gpio_chip.direction_output = cxd2820r_gpio_direction_output;
                priv->gpio_chip.set = cxd2820r_gpio_set;
                priv->gpio_chip.get = cxd2820r_gpio_get;
-               priv->gpio_chip.base = -1; /* dynamic allocation */
+               priv->gpio_chip.base = -1; /* Dynamic allocation */
                priv->gpio_chip.ngpio = GPIO_COUNT;
                priv->gpio_chip.can_sleep = 1;
                ret = gpiochip_add_data(&priv->gpio_chip, priv);
                if (ret)
-                       goto error;
+                       goto err_client_1_i2c_unregister_device;
 
                dev_dbg(&priv->i2c->dev, "%s: gpio_chip.base=%d\n", __func__,
                                priv->gpio_chip.base);
@@ -705,17 +765,65 @@ struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
                gpio[2] = 0;
                ret = cxd2820r_gpio(&priv->fe, gpio);
                if (ret)
-                       goto error;
+                       goto err_client_1_i2c_unregister_device;
 #endif
        }
 
-       return &priv->fe;
-error:
-       dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret);
+       /* Create dvb frontend */
+       memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(priv->fe.ops));
+       if (!pdata->attach_in_use)
+               priv->fe.ops.release = NULL;
+       priv->fe.demodulator_priv = priv;
+       i2c_set_clientdata(client, priv);
+
+       /* Setup callbacks */
+       pdata->get_dvb_frontend = cxd2820r_get_dvb_frontend;
+
+       dev_info(&client->dev, "Sony CXD2820R successfully identified\n");
+
+       return 0;
+err_client_1_i2c_unregister_device:
+       i2c_unregister_device(priv->client[1]);
+err_kfree:
        kfree(priv);
-       return NULL;
+err:
+       dev_dbg(&client->dev, "failed=%d\n", ret);
+       return ret;
 }
-EXPORT_SYMBOL(cxd2820r_attach);
+
+static int cxd2820r_remove(struct i2c_client *client)
+{
+       struct cxd2820r_priv *priv = i2c_get_clientdata(client);
+
+       dev_dbg(&client->dev, "\n");
+
+#ifdef CONFIG_GPIOLIB
+       if (priv->gpio_chip.label)
+               gpiochip_remove(&priv->gpio_chip);
+#endif
+       i2c_unregister_device(priv->client[1]);
+       kfree(priv);
+
+       return 0;
+}
+
+static const struct i2c_device_id cxd2820r_id_table[] = {
+       {"cxd2820r", 0},
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, cxd2820r_id_table);
+
+static struct i2c_driver cxd2820r_driver = {
+       .driver = {
+               .name                = "cxd2820r",
+               .suppress_bind_attrs = true,
+       },
+       .probe    = cxd2820r_probe,
+       .remove   = cxd2820r_remove,
+       .id_table = cxd2820r_id_table,
+};
+
+module_i2c_driver(cxd2820r_driver);
 
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 MODULE_DESCRIPTION("Sony CXD2820R demodulator driver");
index 66b19dd..f711fbd 100644 (file)
@@ -38,9 +38,14 @@ struct reg_val_mask {
 #define CXD2820R_CLK 41000000
 
 struct cxd2820r_priv {
+       struct i2c_client *client[2];
        struct i2c_adapter *i2c;
        struct dvb_frontend fe;
-       struct cxd2820r_config cfg;
+       u8 ts_mode;
+       bool ts_clk_inv;
+       bool if_agc_polarity;
+       bool spec_inv;
+
        u64 post_bit_error_prev_dvbv3;
        u64 post_bit_error;
 
index ddd8e46..e328fe2 100644 (file)
@@ -45,9 +45,9 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe)
                { 0x00085, 0x07, 0xff },
                { 0x00088, 0x01, 0xff },
 
-               { 0x00070, priv->cfg.ts_mode, 0xff },
-               { 0x00071, !priv->cfg.ts_clock_inv << 4, 0x10 },
-               { 0x000cb, priv->cfg.if_agc_polarity << 6, 0x40 },
+               { 0x00070, priv->ts_mode, 0xff },
+               { 0x00071, !priv->ts_clk_inv << 4, 0x10 },
+               { 0x000cb, priv->if_agc_polarity << 6, 0x40 },
                { 0x000a5, 0x00, 0x01 },
                { 0x00082, 0x20, 0x60 },
                { 0x000c2, 0xc3, 0xff },
index e09f152..3a2c198 100644 (file)
@@ -45,10 +45,10 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe)
                { 0x0207f, 0x2a, 0xff },
                { 0x02082, 0x0a, 0xff },
                { 0x02083, 0x0a, 0xff },
-               { 0x020cb, priv->cfg.if_agc_polarity << 6, 0x40 },
-               { 0x02070, priv->cfg.ts_mode, 0xff },
-               { 0x02071, !priv->cfg.ts_clock_inv << 6, 0x40 },
-               { 0x020b5, priv->cfg.spec_inv << 4, 0x10 },
+               { 0x020cb, priv->if_agc_polarity << 6, 0x40 },
+               { 0x02070, priv->ts_mode, 0xff },
+               { 0x02071, !priv->ts_clk_inv << 6, 0x40 },
+               { 0x020b5, priv->spec_inv << 4, 0x10 },
                { 0x02567, 0x07, 0x0f },
                { 0x02569, 0x03, 0x03 },
                { 0x02595, 0x1a, 0xff },