spi: sc18is602: Convert to let spi core validate transfer speed

Set master->max_speed_hz and master->min_speed_hz then spi core will handle
checking transfer speed. So we can remove the same checking in this driver.

This patch also remove testing if hz is 0 because spi->max_speed_hz will be
default set to master->min_speed_hz if it was not set. So the transfer speed
will never set to 0.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 7fba10b..237f2e7 100644 (file)
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -183,17 +183,9 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
 static int sc18is602_check_transfer(struct spi_device *spi,
                                    struct spi_transfer *t, int tlen)
 {
-       uint32_t hz;
-
        if (t && t->len + tlen > SC18IS602_BUFSIZ)
                return -EINVAL;
 
-       hz = spi->max_speed_hz;
-       if (t && t->speed_hz)
-               hz = t->speed_hz;
-       if (hz == 0)
-               return -EINVAL;
-
        return 0;
 }
 
@@ -207,14 +199,13 @@ static int sc18is602_transfer_one(struct spi_master *master,
 
        hw->tlen = 0;
        list_for_each_entry(t, &m->transfers, transfer_list) {
-               u32 hz = t->speed_hz ? : spi->max_speed_hz;
                bool do_transfer;
 
                status = sc18is602_check_transfer(spi, t, hw->tlen);
                if (status < 0)
                        break;
 
-               status = sc18is602_setup_transfer(hw, hz, spi->mode);
+               status = sc18is602_setup_transfer(hw, t->speed_hz, spi->mode);
                if (status < 0)
                        break;
 
@@ -305,6 +296,8 @@ static int sc18is602_probe(struct i2c_client *client,
        master->setup = sc18is602_setup;
        master->transfer_one_message = sc18is602_transfer_one;
        master->dev.of_node = np;
+       master->min_speed_hz = hw->freq / 128;
+       master->max_speed_hz = hw->freq / 4;
 
        error = devm_spi_register_master(dev, master);
        if (error)