tags
TAGS
vmlinux
+vmlinuz
System.map
Module.markers
Module.symvers
+++ /dev/null
- Dynamic DMA mapping
- ===================
-
- David S. Miller <davem@redhat.com>
- Richard Henderson <rth@cygnus.com>
- Jakub Jelinek <jakub@redhat.com>
-
-This document describes the DMA mapping system in terms of the pci_
-API. For a similar API that works for generic devices, see
-DMA-API.txt.
-
-Most of the 64bit platforms have special hardware that translates bus
-addresses (DMA addresses) into physical addresses. This is similar to
-how page tables and/or a TLB translates virtual addresses to physical
-addresses on a CPU. This is needed so that e.g. PCI devices can
-access with a Single Address Cycle (32bit DMA address) any page in the
-64bit physical address space. Previously in Linux those 64bit
-platforms had to set artificial limits on the maximum RAM size in the
-system, so that the virt_to_bus() static scheme works (the DMA address
-translation tables were simply filled on bootup to map each bus
-address to the physical page __pa(bus_to_virt())).
-
-So that Linux can use the dynamic DMA mapping, it needs some help from the
-drivers, namely it has to take into account that DMA addresses should be
-mapped only for the time they are actually used and unmapped after the DMA
-transfer.
-
-The following API will work of course even on platforms where no such
-hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
-top of the virt_to_bus interface.
-
-First of all, you should make sure
-
-#include <linux/pci.h>
-
-is in your driver. This file will obtain for you the definition of the
-dma_addr_t (which can hold any valid DMA address for the platform)
-type which should be used everywhere you hold a DMA (bus) address
-returned from the DMA mapping functions.
-
- What memory is DMA'able?
-
-The first piece of information you must know is what kernel memory can
-be used with the DMA mapping facilities. There has been an unwritten
-set of rules regarding this, and this text is an attempt to finally
-write them down.
-
-If you acquired your memory via the page allocator
-(i.e. __get_free_page*()) or the generic memory allocators
-(i.e. kmalloc() or kmem_cache_alloc()) then you may DMA to/from
-that memory using the addresses returned from those routines.
-
-This means specifically that you may _not_ use the memory/addresses
-returned from vmalloc() for DMA. It is possible to DMA to the
-_underlying_ memory mapped into a vmalloc() area, but this requires
-walking page tables to get the physical addresses, and then
-translating each of those pages back to a kernel address using
-something like __va(). [ EDIT: Update this when we integrate
-Gerd Knorr's generic code which does this. ]
-
-This rule also means that you may use neither kernel image addresses
-(items in data/text/bss segments), nor module image addresses, nor
-stack addresses for DMA. These could all be mapped somewhere entirely
-different than the rest of physical memory. Even if those classes of
-memory could physically work with DMA, you'd need to ensure the I/O
-buffers were cacheline-aligned. Without that, you'd see cacheline
-sharing problems (data corruption) on CPUs with DMA-incoherent caches.
-(The CPU could write to one word, DMA would write to a different one
-in the same cache line, and one of them could be overwritten.)
-
-Also, this means that you cannot take the return of a kmap()
-call and DMA to/from that. This is similar to vmalloc().
-
-What about block I/O and networking buffers? The block I/O and
-networking subsystems make sure that the buffers they use are valid
-for you to DMA from/to.
-
- DMA addressing limitations
-
-Does your device have any DMA addressing limitations? For example, is
-your device only capable of driving the low order 24-bits of address
-on the PCI bus for SAC DMA transfers? If so, you need to inform the
-PCI layer of this fact.
-
-By default, the kernel assumes that your device can address the full
-32-bits in a SAC cycle. For a 64-bit DAC capable device, this needs
-to be increased. And for a device with limitations, as discussed in
-the previous paragraph, it needs to be decreased.
-
-pci_alloc_consistent() by default will return 32-bit DMA addresses.
-PCI-X specification requires PCI-X devices to support 64-bit
-addressing (DAC) for all transactions. And at least one platform (SGI
-SN2) requires 64-bit consistent allocations to operate correctly when
-the IO bus is in PCI-X mode. Therefore, like with pci_set_dma_mask(),
-it's good practice to call pci_set_consistent_dma_mask() to set the
-appropriate mask even if your device only supports 32-bit DMA
-(default) and especially if it's a PCI-X device.
-
-For correct operation, you must interrogate the PCI layer in your
-device probe routine to see if the PCI controller on the machine can
-properly support the DMA addressing limitation your device has. It is
-good style to do this even if your device holds the default setting,
-because this shows that you did think about these issues wrt. your
-device.
-
-The query is performed via a call to pci_set_dma_mask():
-
- int pci_set_dma_mask(struct pci_dev *pdev, u64 device_mask);
-
-The query for consistent allocations is performed via a call to
-pci_set_consistent_dma_mask():
-
- int pci_set_consistent_dma_mask(struct pci_dev *pdev, u64 device_mask);
-
-Here, pdev is a pointer to the PCI device struct of your device, and
-device_mask is a bit mask describing which bits of a PCI address your
-device supports. It returns zero if your card can perform DMA
-properly on the machine given the address mask you provided.
-
-If it returns non-zero, your device cannot perform DMA properly on
-this platform, and attempting to do so will result in undefined
-behavior. You must either use a different mask, or not use DMA.
-
-This means that in the failure case, you have three options:
-
-1) Use another DMA mask, if possible (see below).
-2) Use some non-DMA mode for data transfer, if possible.
-3) Ignore this device and do not initialize it.
-
-It is recommended that your driver print a kernel KERN_WARNING message
-when you end up performing either #2 or #3. In this manner, if a user
-of your driver reports that performance is bad or that the device is not
-even detected, you can ask them for the kernel messages to find out
-exactly why.
-
-The standard 32-bit addressing PCI device would do something like
-this:
-
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING
- "mydev: No suitable DMA available.\n");
- goto ignore_this_device;
- }
-
-Another common scenario is a 64-bit capable device. The approach
-here is to try for 64-bit DAC addressing, but back down to a
-32-bit mask should that fail. The PCI platform code may fail the
-64-bit mask not because the platform is not capable of 64-bit
-addressing. Rather, it may fail in this case simply because
-32-bit SAC addressing is done more efficiently than DAC addressing.
-Sparc64 is one platform which behaves in this way.
-
-Here is how you would handle a 64-bit capable device which can drive
-all 64-bits when accessing streaming DMA:
-
- int using_dac;
-
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- using_dac = 1;
- } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- using_dac = 0;
- } else {
- printk(KERN_WARNING
- "mydev: No suitable DMA available.\n");
- goto ignore_this_device;
- }
-
-If a card is capable of using 64-bit consistent allocations as well,
-the case would look like this:
-
- int using_dac, consistent_using_dac;
-
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- using_dac = 1;
- consistent_using_dac = 1;
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- using_dac = 0;
- consistent_using_dac = 0;
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- } else {
- printk(KERN_WARNING
- "mydev: No suitable DMA available.\n");
- goto ignore_this_device;
- }
-
-pci_set_consistent_dma_mask() will always be able to set the same or a
-smaller mask as pci_set_dma_mask(). However for the rare case that a
-device driver only uses consistent allocations, one would have to
-check the return value from pci_set_consistent_dma_mask().
-
-Finally, if your device can only drive the low 24-bits of
-address during PCI bus mastering you might do something like:
-
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) {
- printk(KERN_WARNING
- "mydev: 24-bit DMA addressing not available.\n");
- goto ignore_this_device;
- }
-
-When pci_set_dma_mask() is successful, and returns zero, the PCI layer
-saves away this mask you have provided. The PCI layer will use this
-information later when you make DMA mappings.
-
-There is a case which we are aware of at this time, which is worth
-mentioning in this documentation. If your device supports multiple
-functions (for example a sound card provides playback and record
-functions) and the various different functions have _different_
-DMA addressing limitations, you may wish to probe each mask and
-only provide the functionality which the machine can handle. It
-is important that the last call to pci_set_dma_mask() be for the
-most specific mask.
-
-Here is pseudo-code showing how this might be done:
-
- #define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
- #define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
-
- struct my_sound_card *card;
- struct pci_dev *pdev;
-
- ...
- if (!pci_set_dma_mask(pdev, PLAYBACK_ADDRESS_BITS)) {
- card->playback_enabled = 1;
- } else {
- card->playback_enabled = 0;
- printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
- card->name);
- }
- if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
- card->record_enabled = 1;
- } else {
- card->record_enabled = 0;
- printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
- card->name);
- }
-
-A sound card was used as an example here because this genre of PCI
-devices seems to be littered with ISA chips given a PCI front end,
-and thus retaining the 16MB DMA addressing limitations of ISA.
-
- Types of DMA mappings
-
-There are two types of DMA mappings:
-
-- Consistent DMA mappings which are usually mapped at driver
- initialization, unmapped at the end and for which the hardware should
- guarantee that the device and the CPU can access the data
- in parallel and will see updates made by each other without any
- explicit software flushing.
-
- Think of "consistent" as "synchronous" or "coherent".
-
- The current default is to return consistent memory in the low 32
- bits of the PCI bus space. However, for future compatibility you
- should set the consistent mask even if this default is fine for your
- driver.
-
- Good examples of what to use consistent mappings for are:
-
- - Network card DMA ring descriptors.
- - SCSI adapter mailbox command data structures.
- - Device firmware microcode executed out of
- main memory.
-
- The invariant these examples all require is that any CPU store
- to memory is immediately visible to the device, and vice
- versa. Consistent mappings guarantee this.
-
- IMPORTANT: Consistent DMA memory does not preclude the usage of
- proper memory barriers. The CPU may reorder stores to
- consistent memory just as it may normal memory. Example:
- if it is important for the device to see the first word
- of a descriptor updated before the second, you must do
- something like:
-
- desc->word0 = address;
- wmb();
- desc->word1 = DESC_VALID;
-
- in order to get correct behavior on all platforms.
-
- Also, on some platforms your driver may need to flush CPU write
- buffers in much the same way as it needs to flush write buffers
- found in PCI bridges (such as by reading a register's value
- after writing it).
-
-- Streaming DMA mappings which are usually mapped for one DMA transfer,
- unmapped right after it (unless you use pci_dma_sync_* below) and for which
- hardware can optimize for sequential accesses.
-
- This of "streaming" as "asynchronous" or "outside the coherency
- domain".
-
- Good examples of what to use streaming mappings for are:
-
- - Networking buffers transmitted/received by a device.
- - Filesystem buffers written/read by a SCSI device.
-
- The interfaces for using this type of mapping were designed in
- such a way that an implementation can make whatever performance
- optimizations the hardware allows. To this end, when using
- such mappings you must be explicit about what you want to happen.
-
-Neither type of DMA mapping has alignment restrictions that come
-from PCI, although some devices may have such restrictions.
-Also, systems with caches that aren't DMA-coherent will work better
-when the underlying buffers don't share cache lines with other data.
-
-
- Using Consistent DMA mappings.
-
-To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
-you should do:
-
- dma_addr_t dma_handle;
-
- cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
-
-where pdev is a struct pci_dev *. This may be called in interrupt context.
-You should use dma_alloc_coherent (see DMA-API.txt) for buses
-where devices don't have struct pci_dev (like ISA, EISA).
-
-This argument is needed because the DMA translations may be bus
-specific (and often is private to the bus which the device is attached
-to).
-
-Size is the length of the region you want to allocate, in bytes.
-
-This routine will allocate RAM for that region, so it acts similarly to
-__get_free_pages (but takes size instead of a page order). If your
-driver needs regions sized smaller than a page, you may prefer using
-the pci_pool interface, described below.
-
-The consistent DMA mapping interfaces, for non-NULL pdev, will by
-default return a DMA address which is SAC (Single Address Cycle)
-addressable. Even if the device indicates (via PCI dma mask) that it
-may address the upper 32-bits and thus perform DAC cycles, consistent
-allocation will only return > 32-bit PCI addresses for DMA if the
-consistent dma mask has been explicitly changed via
-pci_set_consistent_dma_mask(). This is true of the pci_pool interface
-as well.
-
-pci_alloc_consistent returns two values: the virtual address which you
-can use to access it from the CPU and dma_handle which you pass to the
-card.
-
-The cpu return address and the DMA bus master address are both
-guaranteed to be aligned to the smallest PAGE_SIZE order which
-is greater than or equal to the requested size. This invariant
-exists (for example) to guarantee that if you allocate a chunk
-which is smaller than or equal to 64 kilobytes, the extent of the
-buffer you receive will not cross a 64K boundary.
-
-To unmap and free such a DMA region, you call:
-
- pci_free_consistent(pdev, size, cpu_addr, dma_handle);
-
-where pdev, size are the same as in the above call and cpu_addr and
-dma_handle are the values pci_alloc_consistent returned to you.
-This function may not be called in interrupt context.
-
-If your driver needs lots of smaller memory regions, you can write
-custom code to subdivide pages returned by pci_alloc_consistent,
-or you can use the pci_pool API to do that. A pci_pool is like
-a kmem_cache, but it uses pci_alloc_consistent not __get_free_pages.
-Also, it understands common hardware constraints for alignment,
-like queue heads needing to be aligned on N byte boundaries.
-
-Create a pci_pool like this:
-
- struct pci_pool *pool;
-
- pool = pci_pool_create(name, pdev, size, align, alloc);
-
-The "name" is for diagnostics (like a kmem_cache name); pdev and size
-are as above. The device's hardware alignment requirement for this
-type of data is "align" (which is expressed in bytes, and must be a
-power of two). If your device has no boundary crossing restrictions,
-pass 0 for alloc; passing 4096 says memory allocated from this pool
-must not cross 4KByte boundaries (but at that time it may be better to
-go for pci_alloc_consistent directly instead).
-
-Allocate memory from a pci pool like this:
-
- cpu_addr = pci_pool_alloc(pool, flags, &dma_handle);
-
-flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
-holding SMP locks), SLAB_ATOMIC otherwise. Like pci_alloc_consistent,
-this returns two values, cpu_addr and dma_handle.
-
-Free memory that was allocated from a pci_pool like this:
-
- pci_pool_free(pool, cpu_addr, dma_handle);
-
-where pool is what you passed to pci_pool_alloc, and cpu_addr and
-dma_handle are the values pci_pool_alloc returned. This function
-may be called in interrupt context.
-
-Destroy a pci_pool by calling:
-
- pci_pool_destroy(pool);
-
-Make sure you've called pci_pool_free for all memory allocated
-from a pool before you destroy the pool. This function may not
-be called in interrupt context.
-
- DMA Direction
-
-The interfaces described in subsequent portions of this document
-take a DMA direction argument, which is an integer and takes on
-one of the following values:
-
- PCI_DMA_BIDIRECTIONAL
- PCI_DMA_TODEVICE
- PCI_DMA_FROMDEVICE
- PCI_DMA_NONE
-
-One should provide the exact DMA direction if you know it.
-
-PCI_DMA_TODEVICE means "from main memory to the PCI device"
-PCI_DMA_FROMDEVICE means "from the PCI device to main memory"
-It is the direction in which the data moves during the DMA
-transfer.
-
-You are _strongly_ encouraged to specify this as precisely
-as you possibly can.
-
-If you absolutely cannot know the direction of the DMA transfer,
-specify PCI_DMA_BIDIRECTIONAL. It means that the DMA can go in
-either direction. The platform guarantees that you may legally
-specify this, and that it will work, but this may be at the
-cost of performance for example.
-
-The value PCI_DMA_NONE is to be used for debugging. One can
-hold this in a data structure before you come to know the
-precise direction, and this will help catch cases where your
-direction tracking logic has failed to set things up properly.
-
-Another advantage of specifying this value precisely (outside of
-potential platform-specific optimizations of such) is for debugging.
-Some platforms actually have a write permission boolean which DMA
-mappings can be marked with, much like page protections in the user
-program address space. Such platforms can and do report errors in the
-kernel logs when the PCI controller hardware detects violation of the
-permission setting.
-
-Only streaming mappings specify a direction, consistent mappings
-implicitly have a direction attribute setting of
-PCI_DMA_BIDIRECTIONAL.
-
-The SCSI subsystem tells you the direction to use in the
-'sc_data_direction' member of the SCSI command your driver is
-working on.
-
-For Networking drivers, it's a rather simple affair. For transmit
-packets, map/unmap them with the PCI_DMA_TODEVICE direction
-specifier. For receive packets, just the opposite, map/unmap them
-with the PCI_DMA_FROMDEVICE direction specifier.
-
- Using Streaming DMA mappings
-
-The streaming DMA mapping routines can be called from interrupt
-context. There are two versions of each map/unmap, one which will
-map/unmap a single memory region, and one which will map/unmap a
-scatterlist.
-
-To map a single region, you do:
-
- struct pci_dev *pdev = mydev->pdev;
- dma_addr_t dma_handle;
- void *addr = buffer->ptr;
- size_t size = buffer->len;
-
- dma_handle = pci_map_single(pdev, addr, size, direction);
-
-and to unmap it:
-
- pci_unmap_single(pdev, dma_handle, size, direction);
-
-You should call pci_unmap_single when the DMA activity is finished, e.g.
-from the interrupt which told you that the DMA transfer is done.
-
-Using cpu pointers like this for single mappings has a disadvantage,
-you cannot reference HIGHMEM memory in this way. Thus, there is a
-map/unmap interface pair akin to pci_{map,unmap}_single. These
-interfaces deal with page/offset pairs instead of cpu pointers.
-Specifically:
-
- struct pci_dev *pdev = mydev->pdev;
- dma_addr_t dma_handle;
- struct page *page = buffer->page;
- unsigned long offset = buffer->offset;
- size_t size = buffer->len;
-
- dma_handle = pci_map_page(pdev, page, offset, size, direction);
-
- ...
-
- pci_unmap_page(pdev, dma_handle, size, direction);
-
-Here, "offset" means byte offset within the given page.
-
-With scatterlists, you map a region gathered from several regions by:
-
- int i, count = pci_map_sg(pdev, sglist, nents, direction);
- struct scatterlist *sg;
-
- for_each_sg(sglist, sg, count, i) {
- hw_address[i] = sg_dma_address(sg);
- hw_len[i] = sg_dma_len(sg);
- }
-
-where nents is the number of entries in the sglist.
-
-The implementation is free to merge several consecutive sglist entries
-into one (e.g. if DMA mapping is done with PAGE_SIZE granularity, any
-consecutive sglist entries can be merged into one provided the first one
-ends and the second one starts on a page boundary - in fact this is a huge
-advantage for cards which either cannot do scatter-gather or have very
-limited number of scatter-gather entries) and returns the actual number
-of sg entries it mapped them to. On failure 0 is returned.
-
-Then you should loop count times (note: this can be less than nents times)
-and use sg_dma_address() and sg_dma_len() macros where you previously
-accessed sg->address and sg->length as shown above.
-
-To unmap a scatterlist, just call:
-
- pci_unmap_sg(pdev, sglist, nents, direction);
-
-Again, make sure DMA activity has already finished.
-
-PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be
- the _same_ one you passed into the pci_map_sg call,
- it should _NOT_ be the 'count' value _returned_ from the
- pci_map_sg call.
-
-Every pci_map_{single,sg} call should have its pci_unmap_{single,sg}
-counterpart, because the bus address space is a shared resource (although
-in some ports the mapping is per each BUS so less devices contend for the
-same bus address space) and you could render the machine unusable by eating
-all bus addresses.
-
-If you need to use the same streaming DMA region multiple times and touch
-the data in between the DMA transfers, the buffer needs to be synced
-properly in order for the cpu and device to see the most uptodate and
-correct copy of the DMA buffer.
-
-So, firstly, just map it with pci_map_{single,sg}, and after each DMA
-transfer call either:
-
- pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
-
-or:
-
- pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
-
-as appropriate.
-
-Then, if you wish to let the device get at the DMA area again,
-finish accessing the data with the cpu, and then before actually
-giving the buffer to the hardware call either:
-
- pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
-
-or:
-
- pci_dma_sync_sg_for_device(dev, sglist, nents, direction);
-
-as appropriate.
-
-After the last DMA transfer call one of the DMA unmap routines
-pci_unmap_{single,sg}. If you don't touch the data from the first pci_map_*
-call till pci_unmap_*, then you don't have to call the pci_dma_sync_*
-routines at all.
-
-Here is pseudo code which shows a situation in which you would need
-to use the pci_dma_sync_*() interfaces.
-
- my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
- {
- dma_addr_t mapping;
-
- mapping = pci_map_single(cp->pdev, buffer, len, PCI_DMA_FROMDEVICE);
-
- cp->rx_buf = buffer;
- cp->rx_len = len;
- cp->rx_dma = mapping;
-
- give_rx_buf_to_card(cp);
- }
-
- ...
-
- my_card_interrupt_handler(int irq, void *devid, struct pt_regs *regs)
- {
- struct my_card *cp = devid;
-
- ...
- if (read_card_status(cp) == RX_BUF_TRANSFERRED) {
- struct my_card_header *hp;
-
- /* Examine the header to see if we wish
- * to accept the data. But synchronize
- * the DMA transfer with the CPU first
- * so that we see updated contents.
- */
- pci_dma_sync_single_for_cpu(cp->pdev, cp->rx_dma,
- cp->rx_len,
- PCI_DMA_FROMDEVICE);
-
- /* Now it is safe to examine the buffer. */
- hp = (struct my_card_header *) cp->rx_buf;
- if (header_is_ok(hp)) {
- pci_unmap_single(cp->pdev, cp->rx_dma, cp->rx_len,
- PCI_DMA_FROMDEVICE);
- pass_to_upper_layers(cp->rx_buf);
- make_and_setup_new_rx_buf(cp);
- } else {
- /* Just sync the buffer and give it back
- * to the card.
- */
- pci_dma_sync_single_for_device(cp->pdev,
- cp->rx_dma,
- cp->rx_len,
- PCI_DMA_FROMDEVICE);
- give_rx_buf_to_card(cp);
- }
- }
- }
-
-Drivers converted fully to this interface should not use virt_to_bus any
-longer, nor should they use bus_to_virt. Some drivers have to be changed a
-little bit, because there is no longer an equivalent to bus_to_virt in the
-dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the pci_alloc_consistent, pci_pool_alloc, and pci_map_single
-calls (pci_map_sg stores them in the scatterlist itself if the platform
-supports dynamic DMA mapping in hardware) in your driver structures and/or
-in the card registers.
-
-All PCI drivers should be using these interfaces with no exceptions.
-It is planned to completely remove virt_to_bus() and bus_to_virt() as
-they are entirely deprecated. Some ports already do not provide these
-as it is impossible to correctly support them.
-
- Optimizing Unmap State Space Consumption
-
-On many platforms, pci_unmap_{single,page}() is simply a nop.
-Therefore, keeping track of the mapping address and length is a waste
-of space. Instead of filling your drivers up with ifdefs and the like
-to "work around" this (which would defeat the whole purpose of a
-portable API) the following facilities are provided.
-
-Actually, instead of describing the macros one by one, we'll
-transform some example code.
-
-1) Use DECLARE_PCI_UNMAP_{ADDR,LEN} in state saving structures.
- Example, before:
-
- struct ring_state {
- struct sk_buff *skb;
- dma_addr_t mapping;
- __u32 len;
- };
-
- after:
-
- struct ring_state {
- struct sk_buff *skb;
- DECLARE_PCI_UNMAP_ADDR(mapping)
- DECLARE_PCI_UNMAP_LEN(len)
- };
-
- NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
- macro.
-
-2) Use pci_unmap_{addr,len}_set to set these values.
- Example, before:
-
- ringp->mapping = FOO;
- ringp->len = BAR;
-
- after:
-
- pci_unmap_addr_set(ringp, mapping, FOO);
- pci_unmap_len_set(ringp, len, BAR);
-
-3) Use pci_unmap_{addr,len} to access these values.
- Example, before:
-
- pci_unmap_single(pdev, ringp->mapping, ringp->len,
- PCI_DMA_FROMDEVICE);
-
- after:
-
- pci_unmap_single(pdev,
- pci_unmap_addr(ringp, mapping),
- pci_unmap_len(ringp, len),
- PCI_DMA_FROMDEVICE);
-
-It really should be self-explanatory. We treat the ADDR and LEN
-separately, because it is possible for an implementation to only
-need the address in order to perform the unmap operation.
-
- Platform Issues
-
-If you are just writing drivers for Linux and do not maintain
-an architecture port for the kernel, you can safely skip down
-to "Closing".
-
-1) Struct scatterlist requirements.
-
- Struct scatterlist must contain, at a minimum, the following
- members:
-
- struct page *page;
- unsigned int offset;
- unsigned int length;
-
- The base address is specified by a "page+offset" pair.
-
- Previous versions of struct scatterlist contained a "void *address"
- field that was sometimes used instead of page+offset. As of Linux
- 2.5., page+offset is always used, and the "address" field has been
- deleted.
-
-2) More to come...
-
- Handling Errors
-
-DMA address space is limited on some architectures and an allocation
-failure can be determined by:
-
-- checking if pci_alloc_consistent returns NULL or pci_map_sg returns 0
-
-- checking the returned dma_addr_t of pci_map_single and pci_map_page
- by using pci_dma_mapping_error():
-
- dma_addr_t dma_handle;
-
- dma_handle = pci_map_single(pdev, addr, size, direction);
- if (pci_dma_mapping_error(pdev, dma_handle)) {
- /*
- * reduce current DMA mapping usage,
- * delay and try again later or
- * reset driver.
- */
- }
-
- Closing
-
-This document, and the API itself, would not be in it's current
-form without the feedback and suggestions from numerous individuals.
-We would like to specifically mention, in no particular order, the
-following people:
-
- Russell King <rmk@arm.linux.org.uk>
- Leo Dagum <dagum@barrel.engr.sgi.com>
- Ralf Baechle <ralf@oss.sgi.com>
- Grant Grundler <grundler@cup.hp.com>
- Jay Estabrook <Jay.Estabrook@compaq.com>
- Thomas Sailer <sailer@ife.ee.ethz.ch>
- Andrea Arcangeli <andrea@suse.de>
- Jens Axboe <jens.axboe@oracle.com>
- David Mosberger-Tang <davidm@hpl.hp.com>
</para>
<programlisting>
static struct mtd_info *board_mtd;
-static unsigned long baseaddr;
+static void __iomem *baseaddr;
</programlisting>
<para>
Static example
<programlisting>
static struct mtd_info board_mtd;
static struct nand_chip board_chip;
-static unsigned long baseaddr;
+static void __iomem *baseaddr;
</programlisting>
</sect1>
<sect1 id="Partition_defines">
}
/* map physical address */
- baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
- if(!baseaddr){
+ baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
+ if (!baseaddr) {
printk("Ioremap to access NAND chip failed\n");
err = -EIO;
goto out_mtd;
goto out;
out_ior:
- iounmap((void *)baseaddr);
+ iounmap(baseaddr);
out_mtd:
kfree (board_mtd);
out:
nand_release (board_mtd);
/* unmap physical address */
- iounmap((void *)baseaddr);
+ iounmap(baseaddr);
/* Free the MTD device structure */
kfree (board_mtd);
* access only the 640k-1MB area, so anything else
* has to be remapped.
*/
- char * baseptr = ioremap(0xFC000000, 1024*1024);
+ void __iomem *baseptr = ioremap(0xFC000000, 1024*1024);
/* write a 'A' to the offset 10 of the area */
writeb('A',baseptr+10);
--- /dev/null
+ Dynamic DMA mapping
+ ===================
+
+ David S. Miller <davem@redhat.com>
+ Richard Henderson <rth@cygnus.com>
+ Jakub Jelinek <jakub@redhat.com>
+
+This document describes the DMA mapping system in terms of the pci_
+API. For a similar API that works for generic devices, see
+DMA-API.txt.
+
+Most of the 64bit platforms have special hardware that translates bus
+addresses (DMA addresses) into physical addresses. This is similar to
+how page tables and/or a TLB translates virtual addresses to physical
+addresses on a CPU. This is needed so that e.g. PCI devices can
+access with a Single Address Cycle (32bit DMA address) any page in the
+64bit physical address space. Previously in Linux those 64bit
+platforms had to set artificial limits on the maximum RAM size in the
+system, so that the virt_to_bus() static scheme works (the DMA address
+translation tables were simply filled on bootup to map each bus
+address to the physical page __pa(bus_to_virt())).
+
+So that Linux can use the dynamic DMA mapping, it needs some help from the
+drivers, namely it has to take into account that DMA addresses should be
+mapped only for the time they are actually used and unmapped after the DMA
+transfer.
+
+The following API will work of course even on platforms where no such
+hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
+top of the virt_to_bus interface.
+
+First of all, you should make sure
+
+#include <linux/pci.h>
+
+is in your driver. This file will obtain for you the definition of the
+dma_addr_t (which can hold any valid DMA address for the platform)
+type which should be used everywhere you hold a DMA (bus) address
+returned from the DMA mapping functions.
+
+ What memory is DMA'able?
+
+The first piece of information you must know is what kernel memory can
+be used with the DMA mapping facilities. There has been an unwritten
+set of rules regarding this, and this text is an attempt to finally
+write them down.
+
+If you acquired your memory via the page allocator
+(i.e. __get_free_page*()) or the generic memory allocators
+(i.e. kmalloc() or kmem_cache_alloc()) then you may DMA to/from
+that memory using the addresses returned from those routines.
+
+This means specifically that you may _not_ use the memory/addresses
+returned from vmalloc() for DMA. It is possible to DMA to the
+_underlying_ memory mapped into a vmalloc() area, but this requires
+walking page tables to get the physical addresses, and then
+translating each of those pages back to a kernel address using
+something like __va(). [ EDIT: Update this when we integrate
+Gerd Knorr's generic code which does this. ]
+
+This rule also means that you may use neither kernel image addresses
+(items in data/text/bss segments), nor module image addresses, nor
+stack addresses for DMA. These could all be mapped somewhere entirely
+different than the rest of physical memory. Even if those classes of
+memory could physically work with DMA, you'd need to ensure the I/O
+buffers were cacheline-aligned. Without that, you'd see cacheline
+sharing problems (data corruption) on CPUs with DMA-incoherent caches.
+(The CPU could write to one word, DMA would write to a different one
+in the same cache line, and one of them could be overwritten.)
+
+Also, this means that you cannot take the return of a kmap()
+call and DMA to/from that. This is similar to vmalloc().
+
+What about block I/O and networking buffers? The block I/O and
+networking subsystems make sure that the buffers they use are valid
+for you to DMA from/to.
+
+ DMA addressing limitations
+
+Does your device have any DMA addressing limitations? For example, is
+your device only capable of driving the low order 24-bits of address
+on the PCI bus for SAC DMA transfers? If so, you need to inform the
+PCI layer of this fact.
+
+By default, the kernel assumes that your device can address the full
+32-bits in a SAC cycle. For a 64-bit DAC capable device, this needs
+to be increased. And for a device with limitations, as discussed in
+the previous paragraph, it needs to be decreased.
+
+pci_alloc_consistent() by default will return 32-bit DMA addresses.
+PCI-X specification requires PCI-X devices to support 64-bit
+addressing (DAC) for all transactions. And at least one platform (SGI
+SN2) requires 64-bit consistent allocations to operate correctly when
+the IO bus is in PCI-X mode. Therefore, like with pci_set_dma_mask(),
+it's good practice to call pci_set_consistent_dma_mask() to set the
+appropriate mask even if your device only supports 32-bit DMA
+(default) and especially if it's a PCI-X device.
+
+For correct operation, you must interrogate the PCI layer in your
+device probe routine to see if the PCI controller on the machine can
+properly support the DMA addressing limitation your device has. It is
+good style to do this even if your device holds the default setting,
+because this shows that you did think about these issues wrt. your
+device.
+
+The query is performed via a call to pci_set_dma_mask():
+
+ int pci_set_dma_mask(struct pci_dev *pdev, u64 device_mask);
+
+The query for consistent allocations is performed via a call to
+pci_set_consistent_dma_mask():
+
+ int pci_set_consistent_dma_mask(struct pci_dev *pdev, u64 device_mask);
+
+Here, pdev is a pointer to the PCI device struct of your device, and
+device_mask is a bit mask describing which bits of a PCI address your
+device supports. It returns zero if your card can perform DMA
+properly on the machine given the address mask you provided.
+
+If it returns non-zero, your device cannot perform DMA properly on
+this platform, and attempting to do so will result in undefined
+behavior. You must either use a different mask, or not use DMA.
+
+This means that in the failure case, you have three options:
+
+1) Use another DMA mask, if possible (see below).
+2) Use some non-DMA mode for data transfer, if possible.
+3) Ignore this device and do not initialize it.
+
+It is recommended that your driver print a kernel KERN_WARNING message
+when you end up performing either #2 or #3. In this manner, if a user
+of your driver reports that performance is bad or that the device is not
+even detected, you can ask them for the kernel messages to find out
+exactly why.
+
+The standard 32-bit addressing PCI device would do something like
+this:
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ printk(KERN_WARNING
+ "mydev: No suitable DMA available.\n");
+ goto ignore_this_device;
+ }
+
+Another common scenario is a 64-bit capable device. The approach
+here is to try for 64-bit DAC addressing, but back down to a
+32-bit mask should that fail. The PCI platform code may fail the
+64-bit mask not because the platform is not capable of 64-bit
+addressing. Rather, it may fail in this case simply because
+32-bit SAC addressing is done more efficiently than DAC addressing.
+Sparc64 is one platform which behaves in this way.
+
+Here is how you would handle a 64-bit capable device which can drive
+all 64-bits when accessing streaming DMA:
+
+ int using_dac;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ using_dac = 1;
+ } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ using_dac = 0;
+ } else {
+ printk(KERN_WARNING
+ "mydev: No suitable DMA available.\n");
+ goto ignore_this_device;
+ }
+
+If a card is capable of using 64-bit consistent allocations as well,
+the case would look like this:
+
+ int using_dac, consistent_using_dac;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ using_dac = 1;
+ consistent_using_dac = 1;
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ using_dac = 0;
+ consistent_using_dac = 0;
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ } else {
+ printk(KERN_WARNING
+ "mydev: No suitable DMA available.\n");
+ goto ignore_this_device;
+ }
+
+pci_set_consistent_dma_mask() will always be able to set the same or a
+smaller mask as pci_set_dma_mask(). However for the rare case that a
+device driver only uses consistent allocations, one would have to
+check the return value from pci_set_consistent_dma_mask().
+
+Finally, if your device can only drive the low 24-bits of
+address during PCI bus mastering you might do something like:
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) {
+ printk(KERN_WARNING
+ "mydev: 24-bit DMA addressing not available.\n");
+ goto ignore_this_device;
+ }
+
+When pci_set_dma_mask() is successful, and returns zero, the PCI layer
+saves away this mask you have provided. The PCI layer will use this
+information later when you make DMA mappings.
+
+There is a case which we are aware of at this time, which is worth
+mentioning in this documentation. If your device supports multiple
+functions (for example a sound card provides playback and record
+functions) and the various different functions have _different_
+DMA addressing limitations, you may wish to probe each mask and
+only provide the functionality which the machine can handle. It
+is important that the last call to pci_set_dma_mask() be for the
+most specific mask.
+
+Here is pseudo-code showing how this might be done:
+
+ #define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
+ #define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
+
+ struct my_sound_card *card;
+ struct pci_dev *pdev;
+
+ ...
+ if (!pci_set_dma_mask(pdev, PLAYBACK_ADDRESS_BITS)) {
+ card->playback_enabled = 1;
+ } else {
+ card->playback_enabled = 0;
+ printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
+ card->name);
+ }
+ if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
+ card->record_enabled = 1;
+ } else {
+ card->record_enabled = 0;
+ printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
+ card->name);
+ }
+
+A sound card was used as an example here because this genre of PCI
+devices seems to be littered with ISA chips given a PCI front end,
+and thus retaining the 16MB DMA addressing limitations of ISA.
+
+ Types of DMA mappings
+
+There are two types of DMA mappings:
+
+- Consistent DMA mappings which are usually mapped at driver
+ initialization, unmapped at the end and for which the hardware should
+ guarantee that the device and the CPU can access the data
+ in parallel and will see updates made by each other without any
+ explicit software flushing.
+
+ Think of "consistent" as "synchronous" or "coherent".
+
+ The current default is to return consistent memory in the low 32
+ bits of the PCI bus space. However, for future compatibility you
+ should set the consistent mask even if this default is fine for your
+ driver.
+
+ Good examples of what to use consistent mappings for are:
+
+ - Network card DMA ring descriptors.
+ - SCSI adapter mailbox command data structures.
+ - Device firmware microcode executed out of
+ main memory.
+
+ The invariant these examples all require is that any CPU store
+ to memory is immediately visible to the device, and vice
+ versa. Consistent mappings guarantee this.
+
+ IMPORTANT: Consistent DMA memory does not preclude the usage of
+ proper memory barriers. The CPU may reorder stores to
+ consistent memory just as it may normal memory. Example:
+ if it is important for the device to see the first word
+ of a descriptor updated before the second, you must do
+ something like:
+
+ desc->word0 = address;
+ wmb();
+ desc->word1 = DESC_VALID;
+
+ in order to get correct behavior on all platforms.
+
+ Also, on some platforms your driver may need to flush CPU write
+ buffers in much the same way as it needs to flush write buffers
+ found in PCI bridges (such as by reading a register's value
+ after writing it).
+
+- Streaming DMA mappings which are usually mapped for one DMA transfer,
+ unmapped right after it (unless you use pci_dma_sync_* below) and for which
+ hardware can optimize for sequential accesses.
+
+ This of "streaming" as "asynchronous" or "outside the coherency
+ domain".
+
+ Good examples of what to use streaming mappings for are:
+
+ - Networking buffers transmitted/received by a device.
+ - Filesystem buffers written/read by a SCSI device.
+
+ The interfaces for using this type of mapping were designed in
+ such a way that an implementation can make whatever performance
+ optimizations the hardware allows. To this end, when using
+ such mappings you must be explicit about what you want to happen.
+
+Neither type of DMA mapping has alignment restrictions that come
+from PCI, although some devices may have such restrictions.
+Also, systems with caches that aren't DMA-coherent will work better
+when the underlying buffers don't share cache lines with other data.
+
+
+ Using Consistent DMA mappings.
+
+To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
+you should do:
+
+ dma_addr_t dma_handle;
+
+ cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
+
+where pdev is a struct pci_dev *. This may be called in interrupt context.
+You should use dma_alloc_coherent (see DMA-API.txt) for buses
+where devices don't have struct pci_dev (like ISA, EISA).
+
+This argument is needed because the DMA translations may be bus
+specific (and often is private to the bus which the device is attached
+to).
+
+Size is the length of the region you want to allocate, in bytes.
+
+This routine will allocate RAM for that region, so it acts similarly to
+__get_free_pages (but takes size instead of a page order). If your
+driver needs regions sized smaller than a page, you may prefer using
+the pci_pool interface, described below.
+
+The consistent DMA mapping interfaces, for non-NULL pdev, will by
+default return a DMA address which is SAC (Single Address Cycle)
+addressable. Even if the device indicates (via PCI dma mask) that it
+may address the upper 32-bits and thus perform DAC cycles, consistent
+allocation will only return > 32-bit PCI addresses for DMA if the
+consistent dma mask has been explicitly changed via
+pci_set_consistent_dma_mask(). This is true of the pci_pool interface
+as well.
+
+pci_alloc_consistent returns two values: the virtual address which you
+can use to access it from the CPU and dma_handle which you pass to the
+card.
+
+The cpu return address and the DMA bus master address are both
+guaranteed to be aligned to the smallest PAGE_SIZE order which
+is greater than or equal to the requested size. This invariant
+exists (for example) to guarantee that if you allocate a chunk
+which is smaller than or equal to 64 kilobytes, the extent of the
+buffer you receive will not cross a 64K boundary.
+
+To unmap and free such a DMA region, you call:
+
+ pci_free_consistent(pdev, size, cpu_addr, dma_handle);
+
+where pdev, size are the same as in the above call and cpu_addr and
+dma_handle are the values pci_alloc_consistent returned to you.
+This function may not be called in interrupt context.
+
+If your driver needs lots of smaller memory regions, you can write
+custom code to subdivide pages returned by pci_alloc_consistent,
+or you can use the pci_pool API to do that. A pci_pool is like
+a kmem_cache, but it uses pci_alloc_consistent not __get_free_pages.
+Also, it understands common hardware constraints for alignment,
+like queue heads needing to be aligned on N byte boundaries.
+
+Create a pci_pool like this:
+
+ struct pci_pool *pool;
+
+ pool = pci_pool_create(name, pdev, size, align, alloc);
+
+The "name" is for diagnostics (like a kmem_cache name); pdev and size
+are as above. The device's hardware alignment requirement for this
+type of data is "align" (which is expressed in bytes, and must be a
+power of two). If your device has no boundary crossing restrictions,
+pass 0 for alloc; passing 4096 says memory allocated from this pool
+must not cross 4KByte boundaries (but at that time it may be better to
+go for pci_alloc_consistent directly instead).
+
+Allocate memory from a pci pool like this:
+
+ cpu_addr = pci_pool_alloc(pool, flags, &dma_handle);
+
+flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
+holding SMP locks), SLAB_ATOMIC otherwise. Like pci_alloc_consistent,
+this returns two values, cpu_addr and dma_handle.
+
+Free memory that was allocated from a pci_pool like this:
+
+ pci_pool_free(pool, cpu_addr, dma_handle);
+
+where pool is what you passed to pci_pool_alloc, and cpu_addr and
+dma_handle are the values pci_pool_alloc returned. This function
+may be called in interrupt context.
+
+Destroy a pci_pool by calling:
+
+ pci_pool_destroy(pool);
+
+Make sure you've called pci_pool_free for all memory allocated
+from a pool before you destroy the pool. This function may not
+be called in interrupt context.
+
+ DMA Direction
+
+The interfaces described in subsequent portions of this document
+take a DMA direction argument, which is an integer and takes on
+one of the following values:
+
+ PCI_DMA_BIDIRECTIONAL
+ PCI_DMA_TODEVICE
+ PCI_DMA_FROMDEVICE
+ PCI_DMA_NONE
+
+One should provide the exact DMA direction if you know it.
+
+PCI_DMA_TODEVICE means "from main memory to the PCI device"
+PCI_DMA_FROMDEVICE means "from the PCI device to main memory"
+It is the direction in which the data moves during the DMA
+transfer.
+
+You are _strongly_ encouraged to specify this as precisely
+as you possibly can.
+
+If you absolutely cannot know the direction of the DMA transfer,
+specify PCI_DMA_BIDIRECTIONAL. It means that the DMA can go in
+either direction. The platform guarantees that you may legally
+specify this, and that it will work, but this may be at the
+cost of performance for example.
+
+The value PCI_DMA_NONE is to be used for debugging. One can
+hold this in a data structure before you come to know the
+precise direction, and this will help catch cases where your
+direction tracking logic has failed to set things up properly.
+
+Another advantage of specifying this value precisely (outside of
+potential platform-specific optimizations of such) is for debugging.
+Some platforms actually have a write permission boolean which DMA
+mappings can be marked with, much like page protections in the user
+program address space. Such platforms can and do report errors in the
+kernel logs when the PCI controller hardware detects violation of the
+permission setting.
+
+Only streaming mappings specify a direction, consistent mappings
+implicitly have a direction attribute setting of
+PCI_DMA_BIDIRECTIONAL.
+
+The SCSI subsystem tells you the direction to use in the
+'sc_data_direction' member of the SCSI command your driver is
+working on.
+
+For Networking drivers, it's a rather simple affair. For transmit
+packets, map/unmap them with the PCI_DMA_TODEVICE direction
+specifier. For receive packets, just the opposite, map/unmap them
+with the PCI_DMA_FROMDEVICE direction specifier.
+
+ Using Streaming DMA mappings
+
+The streaming DMA mapping routines can be called from interrupt
+context. There are two versions of each map/unmap, one which will
+map/unmap a single memory region, and one which will map/unmap a
+scatterlist.
+
+To map a single region, you do:
+
+ struct pci_dev *pdev = mydev->pdev;
+ dma_addr_t dma_handle;
+ void *addr = buffer->ptr;
+ size_t size = buffer->len;
+
+ dma_handle = pci_map_single(pdev, addr, size, direction);
+
+and to unmap it:
+
+ pci_unmap_single(pdev, dma_handle, size, direction);
+
+You should call pci_unmap_single when the DMA activity is finished, e.g.
+from the interrupt which told you that the DMA transfer is done.
+
+Using cpu pointers like this for single mappings has a disadvantage,
+you cannot reference HIGHMEM memory in this way. Thus, there is a
+map/unmap interface pair akin to pci_{map,unmap}_single. These
+interfaces deal with page/offset pairs instead of cpu pointers.
+Specifically:
+
+ struct pci_dev *pdev = mydev->pdev;
+ dma_addr_t dma_handle;
+ struct page *page = buffer->page;
+ unsigned long offset = buffer->offset;
+ size_t size = buffer->len;
+
+ dma_handle = pci_map_page(pdev, page, offset, size, direction);
+
+ ...
+
+ pci_unmap_page(pdev, dma_handle, size, direction);
+
+Here, "offset" means byte offset within the given page.
+
+With scatterlists, you map a region gathered from several regions by:
+
+ int i, count = pci_map_sg(pdev, sglist, nents, direction);
+ struct scatterlist *sg;
+
+ for_each_sg(sglist, sg, count, i) {
+ hw_address[i] = sg_dma_address(sg);
+ hw_len[i] = sg_dma_len(sg);
+ }
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. if DMA mapping is done with PAGE_SIZE granularity, any
+consecutive sglist entries can be merged into one provided the first one
+ends and the second one starts on a page boundary - in fact this is a huge
+advantage for cards which either cannot do scatter-gather or have very
+limited number of scatter-gather entries) and returns the actual number
+of sg entries it mapped them to. On failure 0 is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+To unmap a scatterlist, just call:
+
+ pci_unmap_sg(pdev, sglist, nents, direction);
+
+Again, make sure DMA activity has already finished.
+
+PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be
+ the _same_ one you passed into the pci_map_sg call,
+ it should _NOT_ be the 'count' value _returned_ from the
+ pci_map_sg call.
+
+Every pci_map_{single,sg} call should have its pci_unmap_{single,sg}
+counterpart, because the bus address space is a shared resource (although
+in some ports the mapping is per each BUS so less devices contend for the
+same bus address space) and you could render the machine unusable by eating
+all bus addresses.
+
+If you need to use the same streaming DMA region multiple times and touch
+the data in between the DMA transfers, the buffer needs to be synced
+properly in order for the cpu and device to see the most uptodate and
+correct copy of the DMA buffer.
+
+So, firstly, just map it with pci_map_{single,sg}, and after each DMA
+transfer call either:
+
+ pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
+
+or:
+
+ pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
+
+as appropriate.
+
+Then, if you wish to let the device get at the DMA area again,
+finish accessing the data with the cpu, and then before actually
+giving the buffer to the hardware call either:
+
+ pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
+
+or:
+
+ pci_dma_sync_sg_for_device(dev, sglist, nents, direction);
+
+as appropriate.
+
+After the last DMA transfer call one of the DMA unmap routines
+pci_unmap_{single,sg}. If you don't touch the data from the first pci_map_*
+call till pci_unmap_*, then you don't have to call the pci_dma_sync_*
+routines at all.
+
+Here is pseudo code which shows a situation in which you would need
+to use the pci_dma_sync_*() interfaces.
+
+ my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
+ {
+ dma_addr_t mapping;
+
+ mapping = pci_map_single(cp->pdev, buffer, len, PCI_DMA_FROMDEVICE);
+
+ cp->rx_buf = buffer;
+ cp->rx_len = len;
+ cp->rx_dma = mapping;
+
+ give_rx_buf_to_card(cp);
+ }
+
+ ...
+
+ my_card_interrupt_handler(int irq, void *devid, struct pt_regs *regs)
+ {
+ struct my_card *cp = devid;
+
+ ...
+ if (read_card_status(cp) == RX_BUF_TRANSFERRED) {
+ struct my_card_header *hp;
+
+ /* Examine the header to see if we wish
+ * to accept the data. But synchronize
+ * the DMA transfer with the CPU first
+ * so that we see updated contents.
+ */
+ pci_dma_sync_single_for_cpu(cp->pdev, cp->rx_dma,
+ cp->rx_len,
+ PCI_DMA_FROMDEVICE);
+
+ /* Now it is safe to examine the buffer. */
+ hp = (struct my_card_header *) cp->rx_buf;
+ if (header_is_ok(hp)) {
+ pci_unmap_single(cp->pdev, cp->rx_dma, cp->rx_len,
+ PCI_DMA_FROMDEVICE);
+ pass_to_upper_layers(cp->rx_buf);
+ make_and_setup_new_rx_buf(cp);
+ } else {
+ /* Just sync the buffer and give it back
+ * to the card.
+ */
+ pci_dma_sync_single_for_device(cp->pdev,
+ cp->rx_dma,
+ cp->rx_len,
+ PCI_DMA_FROMDEVICE);
+ give_rx_buf_to_card(cp);
+ }
+ }
+ }
+
+Drivers converted fully to this interface should not use virt_to_bus any
+longer, nor should they use bus_to_virt. Some drivers have to be changed a
+little bit, because there is no longer an equivalent to bus_to_virt in the
+dynamic DMA mapping scheme - you have to always store the DMA addresses
+returned by the pci_alloc_consistent, pci_pool_alloc, and pci_map_single
+calls (pci_map_sg stores them in the scatterlist itself if the platform
+supports dynamic DMA mapping in hardware) in your driver structures and/or
+in the card registers.
+
+All PCI drivers should be using these interfaces with no exceptions.
+It is planned to completely remove virt_to_bus() and bus_to_virt() as
+they are entirely deprecated. Some ports already do not provide these
+as it is impossible to correctly support them.
+
+ Optimizing Unmap State Space Consumption
+
+On many platforms, pci_unmap_{single,page}() is simply a nop.
+Therefore, keeping track of the mapping address and length is a waste
+of space. Instead of filling your drivers up with ifdefs and the like
+to "work around" this (which would defeat the whole purpose of a
+portable API) the following facilities are provided.
+
+Actually, instead of describing the macros one by one, we'll
+transform some example code.
+
+1) Use DECLARE_PCI_UNMAP_{ADDR,LEN} in state saving structures.
+ Example, before:
+
+ struct ring_state {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ __u32 len;
+ };
+
+ after:
+
+ struct ring_state {
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(mapping)
+ DECLARE_PCI_UNMAP_LEN(len)
+ };
+
+ NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
+ macro.
+
+2) Use pci_unmap_{addr,len}_set to set these values.
+ Example, before:
+
+ ringp->mapping = FOO;
+ ringp->len = BAR;
+
+ after:
+
+ pci_unmap_addr_set(ringp, mapping, FOO);
+ pci_unmap_len_set(ringp, len, BAR);
+
+3) Use pci_unmap_{addr,len} to access these values.
+ Example, before:
+
+ pci_unmap_single(pdev, ringp->mapping, ringp->len,
+ PCI_DMA_FROMDEVICE);
+
+ after:
+
+ pci_unmap_single(pdev,
+ pci_unmap_addr(ringp, mapping),
+ pci_unmap_len(ringp, len),
+ PCI_DMA_FROMDEVICE);
+
+It really should be self-explanatory. We treat the ADDR and LEN
+separately, because it is possible for an implementation to only
+need the address in order to perform the unmap operation.
+
+ Platform Issues
+
+If you are just writing drivers for Linux and do not maintain
+an architecture port for the kernel, you can safely skip down
+to "Closing".
+
+1) Struct scatterlist requirements.
+
+ Struct scatterlist must contain, at a minimum, the following
+ members:
+
+ struct page *page;
+ unsigned int offset;
+ unsigned int length;
+
+ The base address is specified by a "page+offset" pair.
+
+ Previous versions of struct scatterlist contained a "void *address"
+ field that was sometimes used instead of page+offset. As of Linux
+ 2.5., page+offset is always used, and the "address" field has been
+ deleted.
+
+2) More to come...
+
+ Handling Errors
+
+DMA address space is limited on some architectures and an allocation
+failure can be determined by:
+
+- checking if pci_alloc_consistent returns NULL or pci_map_sg returns 0
+
+- checking the returned dma_addr_t of pci_map_single and pci_map_page
+ by using pci_dma_mapping_error():
+
+ dma_addr_t dma_handle;
+
+ dma_handle = pci_map_single(pdev, addr, size, direction);
+ if (pci_dma_mapping_error(pdev, dma_handle)) {
+ /*
+ * reduce current DMA mapping usage,
+ * delay and try again later or
+ * reset driver.
+ */
+ }
+
+ Closing
+
+This document, and the API itself, would not be in it's current
+form without the feedback and suggestions from numerous individuals.
+We would like to specifically mention, in no particular order, the
+following people:
+
+ Russell King <rmk@arm.linux.org.uk>
+ Leo Dagum <dagum@barrel.engr.sgi.com>
+ Ralf Baechle <ralf@oss.sgi.com>
+ Grant Grundler <grundler@cup.hp.com>
+ Jay Estabrook <Jay.Estabrook@compaq.com>
+ Thomas Sailer <sailer@ife.ee.ethz.ch>
+ Andrea Arcangeli <andrea@suse.de>
+ Jens Axboe <jens.axboe@oracle.com>
+ David Mosberger-Tang <davidm@hpl.hp.com>
00-INDEX
- This file
-as-iosched.txt
- - Anticipatory IO scheduler
barrier.txt
- I/O Barriers
biodoc.txt
+++ /dev/null
-Anticipatory IO scheduler
--------------------------
-Nick Piggin <piggin@cyberone.com.au> 13 Sep 2003
-
-Attention! Database servers, especially those using "TCQ" disks should
-investigate performance with the 'deadline' IO scheduler. Any system with high
-disk performance requirements should do so, in fact.
-
-If you see unusual performance characteristics of your disk systems, or you
-see big performance regressions versus the deadline scheduler, please email
-me. Database users don't bother unless you're willing to test a lot of patches
-from me ;) its a known issue.
-
-Also, users with hardware RAID controllers, doing striping, may find
-highly variable performance results with using the as-iosched. The
-as-iosched anticipatory implementation is based on the notion that a disk
-device has only one physical seeking head. A striped RAID controller
-actually has a head for each physical device in the logical RAID device.
-
-However, setting the antic_expire (see tunable parameters below) produces
-very similar behavior to the deadline IO scheduler.
-
-Selecting IO schedulers
------------------------
-Refer to Documentation/block/switching-sched.txt for information on
-selecting an io scheduler on a per-device basis.
-
-Anticipatory IO scheduler Policies
-----------------------------------
-The as-iosched implementation implements several layers of policies
-to determine when an IO request is dispatched to the disk controller.
-Here are the policies outlined, in order of application.
-
-1. one-way Elevator algorithm.
-
-The elevator algorithm is similar to that used in deadline scheduler, with
-the addition that it allows limited backward movement of the elevator
-(i.e. seeks backwards). A seek backwards can occur when choosing between
-two IO requests where one is behind the elevator's current position, and
-the other is in front of the elevator's position. If the seek distance to
-the request in back of the elevator is less than half the seek distance to
-the request in front of the elevator, then the request in back can be chosen.
-Backward seeks are also limited to a maximum of MAXBACK (1024*1024) sectors.
-This favors forward movement of the elevator, while allowing opportunistic
-"short" backward seeks.
-
-2. FIFO expiration times for reads and for writes.
-
-This is again very similar to the deadline IO scheduler. The expiration
-times for requests on these lists is tunable using the parameters read_expire
-and write_expire discussed below. When a read or a write expires in this way,
-the IO scheduler will interrupt its current elevator sweep or read anticipation
-to service the expired request.
-
-3. Read and write request batching
-
-A batch is a collection of read requests or a collection of write
-requests. The as scheduler alternates dispatching read and write batches
-to the driver. In the case a read batch, the scheduler submits read
-requests to the driver as long as there are read requests to submit, and
-the read batch time limit has not been exceeded (read_batch_expire).
-The read batch time limit begins counting down only when there are
-competing write requests pending.
-
-In the case of a write batch, the scheduler submits write requests to
-the driver as long as there are write requests available, and the
-write batch time limit has not been exceeded (write_batch_expire).
-However, the length of write batches will be gradually shortened
-when read batches frequently exceed their time limit.
-
-When changing between batch types, the scheduler waits for all requests
-from the previous batch to complete before scheduling requests for the
-next batch.
-
-The read and write fifo expiration times described in policy 2 above
-are checked only when in scheduling IO of a batch for the corresponding
-(read/write) type. So for example, the read FIFO timeout values are
-tested only during read batches. Likewise, the write FIFO timeout
-values are tested only during write batches. For this reason,
-it is generally not recommended for the read batch time
-to be longer than the write expiration time, nor for the write batch
-time to exceed the read expiration time (see tunable parameters below).
-
-When the IO scheduler changes from a read to a write batch,
-it begins the elevator from the request that is on the head of the
-write expiration FIFO. Likewise, when changing from a write batch to
-a read batch, scheduler begins the elevator from the first entry
-on the read expiration FIFO.
-
-4. Read anticipation.
-
-Read anticipation occurs only when scheduling a read batch.
-This implementation of read anticipation allows only one read request
-to be dispatched to the disk controller at a time. In
-contrast, many write requests may be dispatched to the disk controller
-at a time during a write batch. It is this characteristic that can make
-the anticipatory scheduler perform anomalously with controllers supporting
-TCQ, or with hardware striped RAID devices. Setting the antic_expire
-queue parameter (see below) to zero disables this behavior, and the
-anticipatory scheduler behaves essentially like the deadline scheduler.
-
-When read anticipation is enabled (antic_expire is not zero), reads
-are dispatched to the disk controller one at a time.
-At the end of each read request, the IO scheduler examines its next
-candidate read request from its sorted read list. If that next request
-is from the same process as the request that just completed,
-or if the next request in the queue is "very close" to the
-just completed request, it is dispatched immediately. Otherwise,
-statistics (average think time, average seek distance) on the process
-that submitted the just completed request are examined. If it seems
-likely that that process will submit another request soon, and that
-request is likely to be near the just completed request, then the IO
-scheduler will stop dispatching more read requests for up to (antic_expire)
-milliseconds, hoping that process will submit a new request near the one
-that just completed. If such a request is made, then it is dispatched
-immediately. If the antic_expire wait time expires, then the IO scheduler
-will dispatch the next read request from the sorted read queue.
-
-To decide whether an anticipatory wait is worthwhile, the scheduler
-maintains statistics for each process that can be used to compute
-mean "think time" (the time between read requests), and mean seek
-distance for that process. One observation is that these statistics
-are associated with each process, but those statistics are not associated
-with a specific IO device. So for example, if a process is doing IO
-on several file systems on separate devices, the statistics will be
-a combination of IO behavior from all those devices.
-
-
-Tuning the anticipatory IO scheduler
-------------------------------------
-When using 'as', the anticipatory IO scheduler there are 5 parameters under
-/sys/block/*/queue/iosched/. All are units of milliseconds.
-
-The parameters are:
-* read_expire
- Controls how long until a read request becomes "expired". It also controls the
- interval between which expired requests are served, so set to 50, a request
- might take anywhere < 100ms to be serviced _if_ it is the next on the
- expired list. Obviously request expiration strategies won't make the disk
- go faster. The result basically equates to the timeslice a single reader
- gets in the presence of other IO. 100*((seek time / read_expire) + 1) is
- very roughly the % streaming read efficiency your disk should get with
- multiple readers.
-
-* read_batch_expire
- Controls how much time a batch of reads is given before pending writes are
- served. A higher value is more efficient. This might be set below read_expire
- if writes are to be given higher priority than reads, but reads are to be
- as efficient as possible when there are no writes. Generally though, it
- should be some multiple of read_expire.
-
-* write_expire, and
-* write_batch_expire are equivalent to the above, for writes.
-
-* antic_expire
- Controls the maximum amount of time we can anticipate a good read (one
- with a short seek distance from the most recently completed request) before
- giving up. Many other factors may cause anticipation to be stopped early,
- or some processes will not be "anticipated" at all. Should be a bit higher
- for big seek time devices though not a linear correspondence - most
- processes have only a few ms thinktime.
-
-In addition to the tunables above there is a read-only file named est_time
-which, when read, will show:
-
- - The probability of a task exiting without a cooperating task
- submitting an anticipated IO.
-
- - The current mean think time.
-
- - The seek distance used to determine if an incoming IO is better.
-
do not have a corresponding kernel virtual address space mapping) and
low-memory pages.
-Note: Please refer to Documentation/DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
on PCI high mem DMA aspects and mapping of scatter gather lists, and support
for 64 bit PCI.
Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
+
+What: usbvideo quickcam_messenger driver
+When: 2.6.35
+Files: drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why: obsolete v4l1 driver replaced by gspca_stv06xx
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: ov511 v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/ov511.[ch]
+Why: obsolete v4l1 driver replaced by gspca_ov519
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: w9968cf v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/w9968cf*.[ch]
+Why: obsolete v4l1 driver replaced by gspca_ov519
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: ovcamchip sensor framework
+When: 2.6.35
+Files: drivers/media/video/ovcamchip/*
+Why: Only used by obsoleted v4l1 drivers
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: stv680 v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/stv680.[ch]
+Why: obsolete v4l1 driver replaced by gspca_stv0680
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: zc0301 v4l driver
+When: 2.6.35
+Files: drivers/media/video/zc0301/*
+Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+ supports 2 USB-ID's (because it only supports a limited set of
+ sensors) wich are also supported by the gspca_zc3xx driver
+ (which supports 53 USB-ID's in total)
+Who: Hans de Goede <hdegoede@redhat.com>
also be used to enable or disable barriers, for
consistency with other ext4 mount options.
-inode_readahead=n This tuning parameter controls the maximum
+inode_readahead_blks=n This tuning parameter controls the maximum
number of inode table blocks that ext4's inode
table readahead algorithm will pre-read into
the buffer cache. The default value is 32 blocks.
Project web page: http://www.nilfs.org/en/
Download page: http://www.nilfs.org/en/download.html
Git tree web page: http://www.nilfs.org/git/
-NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users
+List info: http://vger.kernel.org/vger-lists.html#linux-nilfs
Caveats
=======
CapBnd: ffffffffffffffff
voluntary_ctxt_switches: 0
nonvoluntary_ctxt_switches: 1
- Stack usage: 12 kB
This shows you nearly the same information you would get if you viewed it with
the ps command. In fact, ps uses the proc file system to obtain its
Mems_allowed_list Same as previous, but in "list format"
voluntary_ctxt_switches number of voluntary context switches
nonvoluntary_ctxt_switches number of non voluntary context switches
- Stack usage: stack usage high water mark (round up to page size)
..............................................................................
Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
--- /dev/null
+Kernel driver amc6821
+=====================
+
+Supported chips:
+ Texas Instruments AMC6821
+ Prefix: 'amc6821'
+ Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
+
+Authors:
+ Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
+
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments amc6821 chip.
+The chip has one on-chip and one remote temperature sensor and one pwm fan
+regulator.
+The pwm can be controlled either from software or automatically.
+
+The driver provides the following sensor accesses in sysfs:
+
+temp1_input ro on-chip temperature
+temp1_min rw "
+temp1_max rw "
+temp1_crit rw "
+temp1_min_alarm ro "
+temp1_max_alarm ro "
+temp1_crit_alarm ro "
+
+temp2_input ro remote temperature
+temp2_min rw "
+temp2_max rw "
+temp2_crit rw "
+temp2_min_alarm ro "
+temp2_max_alarm ro "
+temp2_crit_alarm ro "
+temp2_fault ro "
+
+fan1_input ro tachometer speed
+fan1_min rw "
+fan1_max rw "
+fan1_fault ro "
+fan1_div rw Fan divisor can be either 2 or 4.
+
+pwm1 rw pwm1
+pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
+ by remote temperature, 3=fan controlled by
+ combination of the on-chip temperature and
+ remote-sensor temperature,
+pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3
+pwm1_auto_point1_pwm ro Hardwired to 0, shared for both
+ temperature channels.
+pwm1_auto_point2_pwm rw This value is shared for both temperature
+ channels.
+pwm1_auto_point3_pwm rw Hardwired to 255, shared for both
+ temperature channels.
+
+temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
+ which is rw. Below this temperature fan stops.
+temp1_auto_point2_temp rw The low-temperature limit of the proportional
+ range. Below this temperature
+ pwm1 = pwm1_auto_point2_pwm. It can go from
+ 0 degree C to 124 degree C in steps of
+ 4 degree C. Read it out after writing to get
+ the actual value.
+temp1_auto_point3_temp rw Above this temperature fan runs at maximum
+ speed. It can go from temp1_auto_point2_temp.
+ It can only have certain discrete values
+ which depend on temp1_auto_point2_temp and
+ pwm1_auto_point2_pwm. Read it out after
+ writing to get the actual value.
+
+temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and
+ it defines the passive cooling temperature.
+ Below this temperature the fan stops in
+ the closed loop mode.
+temp2_auto_point2_temp rw The low-temperature limit of the proportional
+ range. Below this temperature
+ pwm1 = pwm1_auto_point2_pwm. It can go from
+ 0 degree C to 124 degree C in steps
+ of 4 degree C.
+
+temp2_auto_point3_temp rw Above this temperature fan runs at maximum
+ speed. It can only have certain discrete
+ values which depend on temp2_auto_point2_temp
+ and pwm1_auto_point2_pwm. Read it out after
+ writing to get actual value.
+
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the amc6821 correctly, you should
+load the module with: init=0.
+
+If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+init=1,
+pwminv: 0 default pwm output, 1 inverts pwm output.
+
Supported chips:
* AMD Family 10h processors:
- Socket F: Quad-Core/Six-Core/Embedded Opteron
- Socket AM2+: Opteron, Phenom (II) X3/X4
+ Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
+ Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
This driver permits reading of the internal temperature sensor of AMD
Family 10h and 11h processors.
-All these processors have a sensor, but on older revisions of Family 10h
-processors, the sensor may return inconsistent values (erratum 319). The
-driver will refuse to load on these revisions unless you specify the
-"force=1" module parameter.
+All these processors have a sensor, but on those for Socket F or AM2+,
+the sensor may return inconsistent values (erratum 319). The driver
+will refuse to load on these revisions unless you specify the "force=1"
+module parameter.
+
+Due to technical reasons, the driver can detect only the mainboard's
+socket type, not the processor's actual capabilities. Therefore, if you
+are using an AM3 processor on an AM2+ mainboard, you can safely use the
+"force=1" parameter.
There is one temperature measurement value, available as temp1_input in
sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
-minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
-ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
-device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
-ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
+allows for multiple fingers to be tracked. If the device supports it, the
+ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the contact area and approaching finger, respectively.
+
+The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
+looking through a window at someone gently holding a finger against the
+glass. You will see two regions, one inner region consisting of the part
+of the finger actually touching the glass, and one outer region formed by
+the perimeter of the finger. The diameter of the inner region is the
+ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
+ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
+against the glass. The inner region will increase, and in general, the
+ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
+unity, is related to the finger pressure. For pressure-based devices,
+ABS_MT_PRESSURE may be used to provide the pressure on the contact area
+instead.
+
+In addition to the MAJOR parameters, the oval shape of the finger can be
+described by adding the MINOR parameters, such that MAJOR and MINOR are the
+major and minor axis of an ellipse. Finally, the orientation of the oval
+shape can be describe with the ORIENTATION parameter.
+
+The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
finger or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
Here is what a minimal event sequence for a two-finger touch would look
like:
- ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
- ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
the notion of pressure. The fingers of the hand and the palm all have
different characteristic widths [1].
+ABS_MT_PRESSURE
+
+The pressure, in arbitrary units, on the contact area. May be used instead
+of TOUCH and WIDTH for pressure-based devices or any device with a spatial
+signal intensity distribution.
+
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe a signed quarter
make use of these native identifiers to reduce bandwidth and cpu usage.
+Gestures
+--------
+
+In the specific application of creating gesture events, the TOUCH and WIDTH
+parameters can be used to, e.g., approximate finger pressure or distinguish
+between index finger and thumb. With the addition of the MINOR parameters,
+one can also distinguish between a sweeping finger and a pointing finger,
+and with ORIENTATION, one can detect twisting of fingers.
+
+
Notes
-----
(5) When following the convention, the driver code can use generic
code to copy the parameters between user and kernel space.
-This table lists ioctls visible from user land for Linux/i386. It contains
-most drivers up to 2.3.14, but I know I am missing some.
+This table lists ioctls visible from user land for Linux/x86. It contains
+most drivers up to 2.6.31, but I know I am missing some. There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
-Code Seq# Include File Comments
+Code Seq#(hex) Include File Comments
========================================================
0x00 00-1F linux/fs.h conflict!
0x00 00-1F scsi/scsi_ioctl.h conflict!
0x03 all linux/hdreg.h
0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these.
0x06 all linux/lp.h
-0x09 all linux/md.h
+0x09 all linux/raid/md_u.h
+0x10 00-0F drivers/char/s390/vmcp.h
0x12 all linux/fs.h
linux/blkpg.h
0x1b all InfiniBand Subsystem <http://www.openib.org/>
0x20 all drivers/cdrom/cm206.h
0x22 all scsi/sg.h
'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem
+'$' 00-0F linux/perf_counter.h, linux/perf_event.h
'1' 00-1F <linux/timepps.h> PPS kit from Ulrich Windl
<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2' 01-04 linux/i2o.h
+'3' 00-0F drivers/s390/char/raw3270.h conflict!
+'3' 00-1F linux/suspend_ioctls.h conflict!
+ and kernel/power/user.c
'8' all SNP8023 advanced NIC card
<mailto:mcr@solidum.com>
-'A' 00-1F linux/apm_bios.h
+'@' 00-0F linux/radeonfb.h conflict!
+'@' 00-0F drivers/video/aty/aty128fb.c conflict!
+'A' 00-1F linux/apm_bios.h conflict!
+'A' 00-0F linux/agpgart.h conflict!
+ and drivers/char/agp/compat_ioctl.h
+'A' 00-7F sound/asound.h conflict!
+'B' 00-1F linux/cciss_ioctl.h conflict!
+'B' 00-0F include/linux/pmu.h conflict!
'B' C0-FF advanced bbus
<mailto:maassen@uni-freiburg.de>
-'C' all linux/soundcard.h
+'C' all linux/soundcard.h conflict!
+'C' 01-2F linux/capi.h conflict!
+'C' F0-FF drivers/net/wan/cosa.h conflict!
'D' all arch/s390/include/asm/dasd.h
-'E' all linux/input.h
-'F' all linux/fb.h
-'H' all linux/hiddev.h
-'I' all linux/isdn.h
+'D' 40-5F drivers/scsi/dpt/dtpi_ioctl.h
+'D' 05 drivers/scsi/pmcraid.h
+'E' all linux/input.h conflict!
+'E' 00-0F xen/evtchn.h conflict!
+'F' all linux/fb.h conflict!
+'F' 01-02 drivers/scsi/pmcraid.h conflict!
+'F' 20 drivers/video/fsl-diu-fb.h conflict!
+'F' 20 drivers/video/intelfb/intelfb.h conflict!
+'F' 20 linux/ivtvfb.h conflict!
+'F' 20 linux/matroxfb.h conflict!
+'F' 20 drivers/video/aty/atyfb_base.c conflict!
+'F' 00-0F video/da8xx-fb.h conflict!
+'F' 80-8F linux/arcfb.h conflict!
+'F' DD video/sstfb.h conflict!
+'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict!
+'G' 00-0F linux/gigaset_dev.h conflict!
+'H' 00-7F linux/hiddev.h conflict!
+'H' 00-0F linux/hidraw.h conflict!
+'H' 00-0F sound/asound.h conflict!
+'H' 20-40 sound/asound_fm.h conflict!
+'H' 80-8F sound/sfnt_info.h conflict!
+'H' 10-8F sound/emu10k1.h conflict!
+'H' 10-1F sound/sb16_csp.h conflict!
+'H' 10-1F sound/hda_hwdep.h conflict!
+'H' 40-4F sound/hdspm.h conflict!
+'H' 40-4F sound/hdsp.h conflict!
+'H' 90 sound/usb/usx2y/usb_stream.h
+'H' C0-F0 net/bluetooth/hci.h conflict!
+'H' C0-DF net/bluetooth/hidp/hidp.h conflict!
+'H' C0-DF net/bluetooth/cmtp/cmtp.h conflict!
+'H' C0-DF net/bluetooth/bnep/bnep.h conflict!
+'I' all linux/isdn.h conflict!
+'I' 00-0F drivers/isdn/divert/isdn_divert.h conflict!
+'I' 40-4F linux/mISDNif.h conflict!
'J' 00-1F drivers/scsi/gdth_ioctl.h
'K' all linux/kd.h
-'L' 00-1F linux/loop.h
-'L' 20-2F driver/usb/misc/vstusb.h
+'L' 00-1F linux/loop.h conflict!
+'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict!
+'L' 20-2F linux/usb/vstusb.h
'L' E0-FF linux/ppdd.h encrypted disk device driver
<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M' all linux/soundcard.h
+'M' all linux/soundcard.h conflict!
+'M' 01-16 mtd/mtd-abi.h conflict!
+ and drivers/mtd/mtdchar.c
+'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h
+'M' 00-0F drivers/video/fsl-diu-fb.h conflict!
'N' 00-1F drivers/usb/scanner.h
-'O' 00-02 include/mtd/ubi-user.h UBI
-'P' all linux/soundcard.h
+'O' 00-06 mtd/ubi-user.h UBI
+'P' all linux/soundcard.h conflict!
+'P' 60-6F sound/sscape_ioctl.h conflict!
+'P' 00-0F drivers/usb/class/usblp.c conflict!
'Q' all linux/soundcard.h
-'R' 00-1F linux/random.h
+'R' 00-1F linux/random.h conflict!
+'R' 01 linux/rfkill.h conflict!
+'R' 01-0F media/rds.h conflict!
+'R' C0-DF net/bluetooth/rfcomm.h
'S' all linux/cdrom.h conflict!
'S' 80-81 scsi/scsi_ioctl.h conflict!
'S' 82-FF scsi/scsi.h conflict!
+'S' 00-7F sound/asequencer.h conflict!
'T' all linux/soundcard.h conflict!
+'T' 00-AF sound/asound.h conflict!
'T' all arch/x86/include/asm/ioctls.h conflict!
-'U' 00-EF linux/drivers/usb/usb.h
-'V' all linux/vt.h
+'T' C0-DF linux/if_tun.h conflict!
+'U' all sound/asound.h conflict!
+'U' 00-0F drivers/media/video/uvc/uvcvideo.h conflict!
+'U' 00-CF linux/uinput.h conflict!
+'U' 00-EF linux/usbdevice_fs.h
+'U' C0-CF drivers/bluetooth/hci_uart.h
+'V' all linux/vt.h conflict!
+'V' all linux/videodev2.h conflict!
+'V' C0 linux/ivtvfb.h conflict!
+'V' C0 linux/ivtv.h conflict!
+'V' C0 media/davinci/vpfe_capture.h conflict!
+'V' C0 media/si4713.h conflict!
+'V' C0-CF drivers/media/video/mxb.h conflict!
'W' 00-1F linux/watchdog.h conflict!
'W' 00-1F linux/wanrouter.h conflict!
-'X' all linux/xfs_fs.h
+'W' 00-3F sound/asound.h conflict!
+'X' all fs/xfs/xfs_fs.h conflict!
+ and fs/xfs/linux-2.6/xfs_ioctl32.h
+ and include/linux/falloc.h
+ and linux/fs.h
+'X' all fs/ocfs2/ocfs_fs.h conflict!
+'X' 01 linux/pktcdvd.h conflict!
'Y' all linux/cyclades.h
-'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices
+'Z' 14-15 drivers/message/fusion/mptctl.h
+'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices
<mailto:gregkh@suse.de>
-'a' all ATM on linux
+'a' all linux/atm*.h, linux/sonet.h ATM on linux
<http://lrcwww.epfl.ch/linux-atm/magic.html>
-'b' 00-FF bit3 vme host bridge
+'b' 00-FF conflict! bit3 vme host bridge
<mailto:natalia@nikhefk.nikhef.nl>
+'b' 00-0F media/bt819.h conflict!
+'c' all linux/cm4000_cs.h conflict!
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
-'c' 80-9F arch/s390/include/asm/chsc.h
-'c' A0-AF arch/x86/include/asm/msr.h
+'c' 00-1F linux/chio.h conflict!
+'c' 80-9F arch/s390/include/asm/chsc.h conflict!
+'c' A0-AF arch/x86/include/asm/msr.h conflict!
'd' 00-FF linux/char/drm/drm/h conflict!
+'d' 02-40 pcmcia/ds.h conflict!
+'d' 10-3F drivers/media/video/dabusb.h conflict!
+'d' C0-CF drivers/media/video/saa7191.h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!
-'e' 00-1F net/irda/irtty.h conflict!
-'f' 00-1F linux/ext2_fs.h
-'h' 00-7F Charon filesystem
+'e' 00-1F drivers/net/irda/irtty-sir.h conflict!
+'f' 00-1F linux/ext2_fs.h conflict!
+'f' 00-1F linux/ext3_fs.h conflict!
+'f' 00-0F fs/jfs/jfs_dinode.h conflict!
+'f' 00-0F fs/ext4/ext4.h conflict!
+'f' 00-0F linux/fs.h conflict!
+'f' 00-0F fs/ocfs2/ocfs2_fs.h conflict!
+'g' 00-0F linux/usb/gadgetfs.h
+'g' 20-2F linux/usb/g_printer.h
+'h' 00-7F conflict! Charon filesystem
<mailto:zapman@interlan.net>
-'i' 00-3F linux/i2o.h
+'h' 00-1F linux/hpet.h conflict!
+'i' 00-3F linux/i2o-dev.h conflict!
+'i' 0B-1F linux/ipmi.h conflict!
+'i' 80-8F linux/i8k.h
'j' 00-3F linux/joystick.h
+'k' 00-0F linux/spi/spidev.h conflict!
+'k' 00-05 video/kyro.h conflict!
'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
-'m' 00-09 linux/mmtimer.h
+'m' 00-09 linux/mmtimer.h conflict!
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!
+'m' 00-19 drivers/message/fusion/mptctl.h conflict!
+'m' 00 drivers/scsi/megaraid/megaraid_ioctl.h conflict!
'm' 00-1F net/irda/irmod.h conflict!
-'n' 00-7F linux/ncp_fs.h
+'n' 00-7F linux/ncp_fs.h and fs/ncpfs/ioctl.c
'n' 80-8F linux/nilfs2_fs.h NILFS2
-'n' E0-FF video/matrox.h matroxfb
+'n' E0-FF linux/matroxfb.h matroxfb
'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2
-'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
-'o' 40-41 include/mtd/ubi-user.h UBI
-'o' 01-A1 include/linux/dvb/*.h DVB
+'o' 00-03 mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
+'o' 40-41 mtd/ubi-user.h UBI
+'o' 01-A1 linux/dvb/*.h DVB
'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this)
+'p' 00-1F linux/rtc.h conflict!
'p' 00-3F linux/mc146818rtc.h conflict!
'p' 40-7F linux/nvram.h
-'p' 80-9F user-space parport
+'p' 80-9F linux/ppdev.h user-space parport
<mailto:tim@cyberelk.net>
-'p' a1-a4 linux/pps.h LinuxPPS
+'p' A1-A4 linux/pps.h LinuxPPS
<mailto:giometti@linux.it>
'q' 00-1F linux/serio.h
-'q' 80-FF Internet PhoneJACK, Internet LineJACK
- <http://www.quicknet.net>
-'r' 00-1F linux/msdos_fs.h
+'q' 80-FF linux/telephony.h Internet PhoneJACK, Internet LineJACK
+ linux/ixjuser.h <http://www.quicknet.net>
+'r' 00-1F linux/msdos_fs.h and fs/fat/dir.c
's' all linux/cdk.h
't' 00-7F linux/if_ppp.h
't' 80-8F linux/isdn_ppp.h
+'t' 90 linux/toshiba.h
'u' 00-1F linux/smb_fs.h
-'v' 00-1F linux/ext2_fs.h conflict!
'v' all linux/videodev.h conflict!
+'v' 00-1F linux/ext2_fs.h conflict!
+'v' 00-1F linux/fs.h conflict!
+'v' 00-0F linux/sonypi.h conflict!
+'v' C0-CF drivers/media/video/ov511.h conflict!
+'v' C0-DF media/pwc-ioctl.h conflict!
+'v' C0-FF linux/meye.h conflict!
+'v' C0-CF drivers/media/video/zoran/zoran.h conflict!
+'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict!
'w' all CERN SCI driver
'y' 00-1F packet based user level communications
<mailto:zapman@interlan.net>
-'z' 00-3F CAN bus card
+'z' 00-3F CAN bus card conflict!
<mailto:hdstich@connectu.ulm.circular.de>
-'z' 40-7F CAN bus card
+'z' 40-7F CAN bus card conflict!
<mailto:oe@port.de>
+'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict!
0x80 00-1F linux/fb.h
0x81 00-1F linux/videotext.h
+0x88 00-3F media/ovcamchip.h
0x89 00-06 arch/x86/include/asm/sockios.h
0x89 0B-DF linux/sockios.h
0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range
+0x89 E0-EF linux/dn.h PROTOPRIVATE range
0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range
0x8B all linux/wireless.h
0x8C 00-3F WiNRADiO driver
<http://www.proximity.com.au/~brian/winradio/>
0x90 00 drivers/cdrom/sbpcd.h
+0x92 00-0F drivers/usb/mon/mon_bin.c
0x93 60-7F linux/auto_fs.h
+0x94 all fs/btrfs/ioctl.h
0x99 00-0F 537-Addinboard driver
<mailto:buk@buks.ipn.de>
0xA0 all linux/sdp/sdp.h Industrial Device Project
0xAB 00-1F linux/nbd.h
0xAC 00-1F linux/raw.h
0xAD 00 Netfilter device in development:
- <mailto:rusty@rustcorp.com.au>
+ <mailto:rusty@rustcorp.com.au>
0xAE all linux/kvm.h Kernel-based Virtual Machine
<mailto:kvm@vger.kernel.org>
0xB0 all RATIO devices in development:
<mailto:vgo@ratio.de>
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
+0xC0 00-0F linux/usb/iowarrior.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
+0xCD 01 linux/reiserfs_fs.h
+0xCF 02 fs/cifs/ioctl.c
+0xDB 00-0F drivers/char/mwave/mwavepub.h
0xDD 00-3F ZFCP device driver see drivers/s390/scsi/
<mailto:aherrman@de.ibm.com>
-0xF3 00-3F video/sisfb.h sisfb (in development)
+0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development)
<mailto:thomas@winischhofer.net>
0xF4 00-1F video/mbxfb.h mbxfb
<mailto:raph@8d.com>
+0xFD all linux/dm-ioctl.h
* (section header: (section description)? )*
(*)?*/
-The short function description ***cannot be multiline***, but the other
-descriptions can be (and they can contain blank lines). If you continue
-that initial short description onto a second line, that second line will
-appear further down at the beginning of the description section, which is
-almost certainly not what you had in mind.
+All "description" text can span multiple lines, although the
+function_name & its short description are traditionally on a single line.
+Description text may also contain blank lines (i.e., lines that contain
+only a "*").
+
+"section header:" names must be unique per function (or struct,
+union, typedef, enum).
Avoid putting a spurious blank line after the function name, or else the
description will be repeated!
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
- old_ordering, s4_nonvs }
+ old_ordering, s4_nonvs, sci_force_enable }
See Documentation/power/video.txt for information on
s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
of _PTS is used by default).
s4_nonvs prevents the kernel from saving/restoring the
ACPI NVS memory during hibernation.
+ sci_force_enable causes the kernel to set SCI_EN directly
+ on resume from S1/S3 (which is against the ACPI spec,
+ but some broken systems don't work without it).
acpi_use_timer_override [HW,ACPI]
Use timer override. For some broken Nvidia NF5 boards
__u8 pad;
} nmi;
__u32 sipi_vector;
- __u32 flags; /* must be zero */
+ __u32 flags;
};
4.30 KVM_SET_VCPU_EVENTS
See KVM_GET_VCPU_EVENTS for the data structure.
+Fields that may be modified asynchronously by running VCPUs can be excluded
+from the update. These fields are nmi.pending and sipi_vector. Keep the
+corresponding bits in the flags field cleared to suppress overwriting the
+current in-kernel state. The bits are:
+
+KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel
+KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector
+
5. The kvm_run structure
its level up and down at every change.
-Volume control
---------------
+Volume control (Console Audio control)
+--------------------------------------
procfs: /proc/acpi/ibm/volume
ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
Software volume control should be done only in the main AC97/HDA
mixer.
-This feature allows volume control on ThinkPad models with a digital
-volume knob (when available, not all models have it), as well as
-mute/unmute control. The available commands are:
+
+About the ThinkPad Console Audio control:
+
+ThinkPads have a built-in amplifier and muting circuit that drives the
+console headphone and speakers. This circuit is after the main AC97
+or HDA mixer in the audio path, and under exclusive control of the
+firmware.
+
+ThinkPads have three special hotkeys to interact with the console
+audio control: volume up, volume down and mute.
+
+It is worth noting that the normal way the mute function works (on
+ThinkPads that do not have a "mute LED") is:
+
+1. Press mute to mute. It will *always* mute, you can press it as
+ many times as you want, and the sound will remain mute.
+
+2. Press either volume key to unmute the ThinkPad (it will _not_
+ change the volume, it will just unmute).
+
+This is a very superior design when compared to the cheap software-only
+mute-toggle solution found on normal consumer laptops: you can be
+absolutely sure the ThinkPad will not make noise if you press the mute
+button, no matter the previous state.
+
+The IBM ThinkPads, and the earlier Lenovo ThinkPads have variable-gain
+amplifiers driving the speakers and headphone output, and the firmware
+also handles volume control for the headphone and speakers on these
+ThinkPads without any help from the operating system (this volume
+control stage exists after the main AC97 or HDA mixer in the audio
+path).
+
+The newer Lenovo models only have firmware mute control, and depend on
+the main HDA mixer to do volume control (which is done by the operating
+system). In this case, the volume keys are filtered out for unmute
+key press (there are some firmware bugs in this area) and delivered as
+normal key presses to the operating system (thinkpad-acpi is not
+involved).
+
+
+The ThinkPad-ACPI volume control:
+
+The preferred way to interact with the Console Audio control is the
+ALSA interface.
+
+The legacy procfs interface allows one to read the current state,
+and if volume control is enabled, accepts the following commands:
echo up >/proc/acpi/ibm/volume
echo down >/proc/acpi/ibm/volume
echo 'level <level>' >/proc/acpi/ibm/volume
The <level> number range is 0 to 14 although not all of them may be
-distinct. The unmute the volume after the mute command, use either the
+distinct. To unmute the volume after the mute command, use either the
up or down command (the level command will not unmute the volume), or
the unmute command.
-The current volume level and mute state is shown in the file.
-
You can use the volume_capabilities parameter to tell the driver
whether your thinkpad has volume control or mute-only control:
volume_capabilities=1 for mixers with mute and volume control,
This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
with other card types when overriding the I/O address. When the driver is
-loaded as a module, only the IRQ and transceiver setting may be overridden.
-For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
-the xcvr and irq module options:
+loaded as a module, only the IRQ may be overridden. For example,
+setting two cards to IRQ10 and IRQ11 is done by using the irq module
+option:
- options 3c509 xcvr=3,1 irq=10,11
+ options 3c509 irq=10,11
(2) Full-duplex mode
itself full-duplex capable. This is almost certainly one of two things: a full-
duplex-capable Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
another system that's connected directly to the 3c509B via a crossover cable.
+
+Full-duplex mode can be enabled using 'ethtool'.
/////Extremely important caution concerning full-duplex mode/////
Understand that the 3c509B's hardware's full-duplex support is much more
never automatically enable full-duplex mode in an existing installation;
it must always be explicitly enabled via one of these code in order to be
activated.
+
+The transceiver type can be changed using 'ethtool'.
(4a) Interpretation of error messages and common problems
It takes an integer value, can be changed by writing to this
file, such as
- # cat 5 > /proc/asound/card0/pcm0p/xrun_debug
+ # echo 5 > /proc/asound/card0/pcm0p/xrun_debug
The value consists of the following bit flags:
bit 0 = Enable XRUN/jiffies debug messages
For example, if the function foo() calls bar(), when the bar() function calls
mcount(), the arguments mcount() will pass to the tracer are:
"frompc" - the address bar() will use to return to foo()
- "selfpc" - the address bar() (with _mcount() size adjustment)
+ "selfpc" - the address bar() (with mcount() size adjustment)
Also keep in mind that this mcount function will be called *a lot*, so
optimizing for the default case of no tracer will help the smooth running of
your system when tracing is disabled. So the start of the mcount function is
-typically the bare min with checking things before returning. That also means
-the code flow should usually kept linear (i.e. no branching in the nop case).
-This is of course an optimization and not a hard requirement.
+typically the bare minimum with checking things before returning. That also
+means the code flow should usually be kept linear (i.e. no branching in the nop
+case). This is of course an optimization and not a hard requirement.
Here is some pseudo code that should help (these functions should actually be
implemented in assembly):
The mcount function should check the function pointers ftrace_graph_return
(compare to ftrace_stub) and ftrace_graph_entry (compare to
-ftrace_graph_entry_stub). If either of those are not set to the relevant stub
+ftrace_graph_entry_stub). If either of those is not set to the relevant stub
function, call the arch-specific function ftrace_graph_caller which in turn
calls the arch-specific function prepare_ftrace_return. Neither of these
-function names are strictly required, but you should use them anyways to stay
+function names is strictly required, but you should use them anyway to stay
consistent across the architecture ports -- easier to compare & contrast
things.
located on the stack. This allows the function to hijack the return address
temporarily to have it point to the arch-specific function return_to_handler.
That function will simply call the common ftrace_return_to_handler function and
-that will return the original return address with which, you can return to the
+that will return the original return address with which you can return to the
original call site.
Here is the updated mcount pseudo code:
Usage
-----
-Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges)
+Make sure debugfs is mounted to /sys/kernel/debug.
+If not (requires root privileges):
$ mount -t debugfs debugfs /sys/kernel/debug
Check that the driver you are about to trace is not loaded.
$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt
and then send the .tar.gz file. The trace compresses considerably. Replace
"pciid" and "nick" with the PCI ID or model name of your piece of hardware
-under investigation and your nick name.
+under investigation and your nickname.
How Mmiotrace Works
Access to hardware IO-memory is gained by mapping addresses from PCI bus by
calling one of the ioremap_*() functions. Mmiotrace is hooked into the
__ioremap() function and gets called whenever a mapping is created. Mapping is
-an event that is recorded into the trace log. Note, that ISA range mappings
+an event that is recorded into the trace log. Note that ISA range mappings
are not caught, since the mapping always exists and is returned directly.
MMIO accesses are recorded via page faults. Just before __ioremap() returns,
----------------
The raw log is text and easily filtered with e.g. grep and awk. One record is
-one line in the log. A record starts with a keyword, followed by keyword
-dependant arguments. Arguments are separated by a space, or continue until the
+one line in the log. A record starts with a keyword, followed by keyword-
+dependent arguments. Arguments are separated by a space, or continue until the
end of line. The format for version 20070824 is as follows:
-Explanation Keyword Space separated arguments
+Explanation Keyword Space-separated arguments
---------------------------------------------------------------------------
read event R width, timestamp, map id, physical, value, PC, PID
marker MARK timestamp, text
version VERSION the string "20070824"
info for reader LSPCI one line from lspci -v
-PCI address map PCIDEV space separated /proc/bus/pci/devices data
+PCI address map PCIDEV space-separated /proc/bus/pci/devices data
unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID
Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual
tail_page - a pointer to the page that will be written to next
-commit_page - a pointer to the page with the last finished non nested write.
+commit_page - a pointer to the page with the last finished non-nested write.
-cmpxchg - hardware assisted atomic transaction that performs the following:
+cmpxchg - hardware-assisted atomic transaction that performs the following:
A = B iff previous A == C
The ring buffer can be used in either an overwrite mode or in
producer/consumer mode.
-Producer/consumer mode is where the producer were to fill up the
+Producer/consumer mode is where if the producer were to fill up the
buffer before the consumer could free up anything, the producer
will stop writing to the buffer. This will lose most recent events.
-Overwrite mode is where the produce were to fill up the buffer
+Overwrite mode is where if the producer were to fill up the buffer
before the consumer could free up anything, the producer will
overwrite the older data. This will lose the oldest events.
-No two writers can write at the same time (on the same per cpu buffer),
+No two writers can write at the same time (on the same per-cpu buffer),
but a writer may interrupt another writer, but it must finish writing
before the previous writer may continue. This is very important to the
algorithm. The writers act like a "stack". The way interrupts works
Readers can happen at any time. But no two readers may run at the
same time, nor can a reader preempt/interrupt another reader. A reader
-can not preempt/interrupt a writer, but it may read/consume from the
+cannot preempt/interrupt a writer, but it may read/consume from the
buffer at the same time as a writer is writing, but the reader must be
on another processor to do so. A reader may read on its own processor
and can be preempted by a writer.
-A writer can preempt a reader, but a reader can not preempt a writer.
+A writer can preempt a reader, but a reader cannot preempt a writer.
But a reader can read the buffer at the same time (on another processor)
as a writer.
-The ring buffer is made up of a list of pages held together by a link list.
+The ring buffer is made up of a list of pages held together by a linked list.
At initialization a reader page is allocated for the reader that is not
part of the ring buffer.
The reader has its own page to use. At start up time, this page is
allocated but is not attached to the list. When the reader wants
-to read from the buffer, if its page is empty (like it is on start up)
+to read from the buffer, if its page is empty (like it is on start-up),
it will swap its page with the head_page. The old reader page will
become part of the ring buffer and the head_page will be removed.
The page after the inserted page (old reader_page) will become the
commit page - the page that last finished a write.
-The commit page only is updated by the outer most writer in the
+The commit page only is updated by the outermost writer in the
writer stack. A writer that preempts another writer will not move the
commit page.
The commit pointer points to the last write location that was
committed without preempting another write. When a write that
preempted another write is committed, it only becomes a pending commit
-and will not be a full commit till all writes have been committed.
+and will not be a full commit until all writes have been committed.
The commit page points to the page that has the last full commit.
The tail page points to the page with the last write (before
page then no more writes may take place (regardless of the mode
of the ring buffer: overwrite and produce/consumer).
-The order of pages are:
+The order of pages is:
head page
commit page
There is a special case that the head page is after either the commit page
and possibly the tail page. That is when the commit (and tail) page has been
swapped with the reader page. This is because the head page is always
-part of the ring buffer, but the reader page is not. When ever there
+part of the ring buffer, but the reader page is not. Whenever there
has been less than a full page that has been committed inside the ring buffer,
and a reader swaps out a page, it will be swapping out the commit page.
In this case, the head page will not move when the tail and commit
move back into the ring buffer.
-The reader can not swap a page into the ring buffer if the commit page
+The reader cannot swap a page into the ring buffer if the commit page
is still on that page. If the read meets the last commit (real commit
not pending or reserved), then there is nothing more to read.
The buffer is considered empty until another full commit finishes.
of the head_page pointer with the swapping of pages with the reader.
State flags are placed inside the pointer to the page. To do this,
each page must be aligned in memory by 4 bytes. This will allow the 2
-least significant bits of the address to be used as flags. Since
+least significant bits of the address to be used as flags, since
they will always be zero for the address. To get the address,
simply mask out the flags.
will also use cmpxchg. If the flag bit in the pointer to the
head page does not have the HEADER flag set, the compare will fail
and the reader will need to look for the new head page and try again.
-Note, the flag UPDATE and HEADER are never set at the same time.
+Note, the flags UPDATE and HEADER are never set at the same time.
The reader swaps the reader page as follows:
| +-----------------------------+ |
+------------------------------------+
-Another important point. The page that the reader page points back to
+Another important point: The page that the reader page points back to
by its previous pointer (the one that now points to the new head page)
never points back to the reader page. That is because the reader page is
not part of the ring buffer. Traversing the ring buffer via the next pointers
move the head page, until the writer is finished with the move.
This eliminates any races that the reader can have on the writer. The reader
-must spin, and this is why the reader can not preempt the writer.
+must spin, and this is why the reader cannot preempt the writer.
tail page
|
tail page wrapped the buffer, and we must drop new writes.
This is not a race condition, because the commit page can only be moved
-by the outter most writer (the writer that was preempted).
+by the outermost writer (the writer that was preempted).
This means that the commit will not move while a writer is moving the
-tail page. The reader can not swap the reader page if it is also being
+tail page. The reader cannot swap the reader page if it is also being
used as the commit page. The reader can simply check that the commit
is off the reader page. Once the commit page leaves the reader page
it will never go back on it unless a reader does another swap with the
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-But if a nested writer preempts here. It will see that the next
+But if a nested writer preempts here, it will see that the next
page is a head page, but it is also nested. It will detect that
it is nested and will save that information. The detection is the
fact that it sees the UPDATE flag instead of a HEADER or NORMAL
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-After the nested writer finishes, the outer most writer will convert
+After the nested writer finishes, the outermost writer will convert
the UPDATE pointer to NORMAL.
+---+ +---+ +---+ +---+
The nested writer moves the tail page forward. But does not set the old
-update page to NORMAL because it is not the outer most writer.
+update page to NORMAL because it is not the outermost writer.
tail page
|
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-The first writer can not know atomically test if the tail page moved
+The first writer cannot know atomically if the tail page moved
while it updates the HEAD page. It will then update the head page to
what it thinks is the new head page.
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-If tail page != A and tail page does not equal B, then it must reset the
-pointer back to NORMAL. The fact that it only needs to worry about
-nested writers, it only needs to check this after setting the HEAD page.
+If tail page != A and tail page != B, then it must reset the pointer
+back to NORMAL. The fact that it only needs to worry about nested
+writers means that it only needs to check this after setting the HEAD page.
(first writer)
+---+ +---+ +---+ +---+
Now the writer can update the head page. This is also why the head page must
-remain in UPDATE and only reset by the outer most writer. This prevents
+remain in UPDATE and only reset by the outermost writer. This prevents
the reader from seeing the incorrect head page.
creating custom kernel modules to register probe functions using the event
tracing infrastructure.
-Simplistically, tracepoints will represent an important event that when can
-be taken in conjunction with other tracepoints to build a "Big Picture" of
+Simplistically, tracepoints represent important events that can be
+taken in conjunction with other tracepoints to build a "Big Picture" of
what is going on within the system. There are a large number of methods for
gathering and interpreting these events. Lacking any current Best Practises,
this document describes some of the methods that can be used.
will give a fair indication of the number of events available.
-2.2 PCL
+2.2 PCL (Performance Counters for Linux)
-------
-Discovery and enumeration of all counters and events, including tracepoints
+Discovery and enumeration of all counters and events, including tracepoints,
are available with the perf tool. Getting a list of available events is a
-simple case of
+simple case of:
$ perf list 2>&1 | grep Tracepoint
ext4:ext4_free_inode [Tracepoint event]
[ .... remaining output snipped .... ]
-2. Enabling Events
+3. Enabling Events
==================
-2.1 System-Wide Event Enabling
+3.1 System-Wide Event Enabling
------------------------------
See Documentation/trace/events.txt for a proper description on how events
can be enabled system-wide. A short example of enabling all events related
-to page allocation would look something like
+to page allocation would look something like:
$ for i in `find /sys/kernel/debug/tracing/events -name "enable" | grep mm_`; do echo 1 > $i; done
-2.2 System-Wide Event Enabling with SystemTap
+3.2 System-Wide Event Enabling with SystemTap
---------------------------------------------
In SystemTap, tracepoints are accessible using the kernel.trace() function
print_count()
}
-2.3 System-Wide Event Enabling with PCL
+3.3 System-Wide Event Enabling with PCL
---------------------------------------
By specifying the -a switch and analysing sleep, the system-wide events
Similarly, one could execute a shell and exit it as desired to get a report
at that point.
-2.4 Local Event Enabling
+3.4 Local Event Enabling
------------------------
Documentation/trace/ftrace.txt describes how to enable events on a per-thread
basis using set_ftrace_pid.
-2.5 Local Event Enablement with PCL
+3.5 Local Event Enablement with PCL
-----------------------------------
-Events can be activate and tracked for the duration of a process on a local
+Events can be activated and tracked for the duration of a process on a local
basis using PCL such as follows.
$ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
0.973913387 seconds time elapsed
-3. Event Filtering
+4. Event Filtering
==================
Documentation/trace/ftrace.txt covers in-depth how to filter events in
ftrace. Obviously using grep and awk of trace_pipe is an option as well
as any script reading trace_pipe.
-4. Analysing Event Variances with PCL
+5. Analysing Event Variances with PCL
=====================================
Any workload can exhibit variances between runs and it can be important
-to know what the standard deviation in. By and large, this is left to the
+to know what the standard deviation is. By and large, this is left to the
performance analyst to do it by hand. In the event that the discrete event
occurrences are useful to the performance analyst, then perf can be used.
aggregation of discrete events, then a script would need to be developed.
Using --repeat, it is also possible to view how events are fluctuating over
-time on a system wide basis using -a and sleep.
+time on a system-wide basis using -a and sleep.
$ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-e kmem:mm_pagevec_free \
1.002251757 seconds time elapsed ( +- 0.005% )
-5. Higher-Level Analysis with Helper Scripts
+6. Higher-Level Analysis with Helper Scripts
============================================
When events are enabled the events that are triggering can be read from
o Reading information from /proc for the PID that triggered the event
o Deriving a higher-level event from a series of lower-level events.
- o Calculate latencies between two events
+ o Calculating latencies between two events
Documentation/trace/postprocess/trace-pagealloc-postprocess.pl is an example
script that can read trace_pipe from STDIN or a copy of a trace. When used
-on-line, it can be interrupted once to generate a report without existing
+on-line, it can be interrupted once to generate a report without exiting
and twice to exit.
Simplistically, the script just reads STDIN and counts up events but it
processes, the parent process responsible for creating all the helpers
can be identified
-6. Lower-Level Analysis with PCL
+7. Lower-Level Analysis with PCL
================================
-There may also be a requirement to identify what functions with a program
+There may also be a requirement to identify what functions within a program
were generating events within the kernel. To begin this sort of analysis, the
-data must be recorded. At the time of writing, this required root
+data must be recorded. At the time of writing, this required root:
$ perf record -c 1 \
-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
# (For more details, try: perf report --sort comm,dso,symbol)
#
-According to this, the vast majority of events occured triggered on events
-within the VDSO. With simple binaries, this will often be the case so lets
+According to this, the vast majority of events triggered on events
+within the VDSO. With simple binaries, this will often be the case so let's
take a slightly different example. In the course of writing this, it was
-noticed that X was generating an insane amount of page allocations so lets look
-at it
+noticed that X was generating an insane amount of page allocations so let's look
+at it:
$ perf record -c 1 -f \
-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
# (For more details, try: perf report --sort comm,dso,symbol)
#
-So, almost half of the events are occuring in a library. To get an idea which
-symbol.
+So, almost half of the events are occurring in a library. To get an idea which
+symbol:
$ perf report --sort comm,dso,symbol
# Samples: 27666
0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] get_fast_path
0.00% Xorg [kernel] [k] ftrace_trace_userstack
-To see where within the function pixmanFillsse2 things are going wrong
+To see where within the function pixmanFillsse2 things are going wrong:
$ perf annotate pixmanFillsse2
[ ... ]
----------------
To use the vga arbiter char device it was implemented an API inside the
-libpciaccess library. One fieldd was added to struct pci_device (each device
+libpciaccess library. One field was added to struct pci_device (each device
on the system):
/* the type of resource decoded by the device */
ALPHA PORT
M: Richard Henderson <rth@twiddle.net>
-S: Odd Fixes for 2.4; Maintained for 2.6.
M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-S: Maintained for 2.4; PCI support for 2.6.
+M: Matt Turner <mattst88@gmail.com>
L: linux-alpha@vger.kernel.org
F: arch/alpha/
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <dan.j.williams@intel.com>
-M: Maciej Sosnowski <maciej.sosnowski@intel.com>
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
M: Andy Walls <awalls@radix.net>
-L: ivtv-devel@ivtvdriver.org
+L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M: Maciej Sosnowski <maciej.sosnowski@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/
F: include/linux/f75375s.h
FIREWIRE SUBSYSTEM
-M: Kristian Hoegsberg <krh@redhat.com>
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
+W: http://ieee1394.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
F: drivers/firewire/
F: drivers/idle/i7300_idle.c
IEEE 1394 SUBSYSTEM
-M: Ben Collins <ben.collins@ubuntu.com>
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
+W: http://ieee1394.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
-S: Maintained
+S: Obsolete
F: Documentation/debugging-via-ohci1394.txt
F: drivers/ieee1394/
-IEEE 1394 RAW I/O DRIVER
-M: Dan Dennedy <dan@dennedy.org>
-M: Stefan Richter <stefanr@s5r6.in-berlin.de>
-L: linux1394-devel@lists.sourceforge.net
-S: Maintained
-F: drivers/ieee1394/raw1394*
-
IEEE 802.15.4 SUBSYSTEM
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Sergey Lapin <slapin@ossfans.org>
F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
-M: Maciej Sosnowski <maciej.sosnowski@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/ioat*
S: Maintained
F: drivers/net/ixp2000/
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
+M: Alex Duyck <alexander.h.duyck@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
F: drivers/net/e1000/
F: drivers/net/e1000e/
F: drivers/net/igb/
+F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
-L: ivtv-devel@ivtvdriver.org
+M: Andy Walls <awalls@radix.net>
+L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
NILFS2 FILESYSTEM
M: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
-L: users@nilfs.org
+L: linux-nilfs@vger.kernel.org
W: http://www.nilfs.org/en/
S: Supported
F: Documentation/filesystems/nilfs2.txt
F: sound/soc/omap/
OMAP FRAMEBUFFER SUPPORT
-M: Imre Deak <imre.deak@nokia.com>
+M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-fbdev@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/video/omap/
-OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
+OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-omap@vger.kernel.org
-L: linux-fbdev@vger.kernel.org (moderated for non-subscribers)
+L: linux-fbdev@vger.kernel.org
S: Maintained
-F: drivers/video/omap2/dss/
-F: drivers/video/omap2/vrfb.c
-F: drivers/video/omap2/vram.c
+F: drivers/video/omap2/
F: Documentation/arm/OMAP/DSS
-OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
-M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-L: linux-omap@vger.kernel.org
-L: linux-fbdev@vger.kernel.org (moderated for non-subscribers)
-S: Maintained
-F: drivers/video/omap2/omapfb/
-
OMAP MMC SUPPORT
M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
# Avoid funny character set dependencies
unexport LC_ALL
-LC_CTYPE=C
LC_COLLATE=C
LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
{
int cpu;
+ if (node == -1)
+ return cpu_all_mask;
+
cpumask_clear(&node_to_cpumask_map[node]);
for_each_online_cpu(cpu) {
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZO
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
select HAVE_IDE
select COMMON_CLKDEV
select GENERIC_ALLOCATOR
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's DaVinci platform.
endchoice
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
+source "arch/arm/mach-h720x/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-ixp23xx/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
source "arch/arm/mach-loki/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
source "arch/arm/mach-mv78xx0/Kconfig"
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/mach-s5pc100/Kconfig"
endif
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
source "arch/arm/mach-w90x900/Kconfig"
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
# Definitions to make life easier
config ARCH_ACORN
bool
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
-machine-$(CONFIG_ARCH_MXC91231) := mxc91231
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
-targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
- head.o misc.o $(OBJS)
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO) = lzo
+
+targets := vmlinux vmlinux.lds \
+ piggy.$(suffix_y) piggy.$(suffix_y).o \
+ font.o font.c head.o misc.o $(OBJS)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
ifneq ($(PARAMS_PHYS),)
LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
endif
-LDFLAGS_vmlinux += -p --no-undefined -X \
- $(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+ $(call cmd,shipped)
# Don't allow any static data in misc.o, which
# would otherwise mess up our GOT table
CFLAGS_misc.o := -Dstatic=
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
- $(addprefix $(obj)/, $(OBJS)) FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
$(call if_changed,ld)
@:
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+ $(call if_changed,$(suffix_y))
-$(obj)/piggy.o: $(obj)/piggy.gz FORCE
+$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE
CFLAGS_font.o := -Dstatic=
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
+#elif defined(CONFIG_CPU_V7)
+ .macro loadsp, rb
+ .endm
+ .macro writeb, ch, rb
+wait: mrc p14, 0, pc, c0, c1, 0
+ bcs wait
+ mcr p14, 0, \ch, c0, c5, 0
+ .endm
#elif defined(CONFIG_CPU_XSCALE)
.macro loadsp, rb
.endm
unsigned int __machine_arch_type;
+#define _LINUX_STRING_H_
+
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <asm/string.h>
+#include <linux/linkage.h>
+
+#include <asm/unaligned.h>
#ifdef STANDALONE_DEBUG
#define putstr printf
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+ asm(
+ "wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bcs wait \n\
+ mcr p14, 0, %0, c0, c5, 0 "
+ : : "r" (ch));
+}
+
#elif defined(CONFIG_CPU_XSCALE)
static void icedcc_putc(int ch)
#endif
#define putc(ch) icedcc_putc(ch)
-#define flush() do { } while (0)
#endif
static void putstr(const char *ptr)
/*
* gzip delarations
*/
-#define OF(args) args
#define STATIC static
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize; /* valid bytes in inbuf */
-static unsigned inptr; /* index of next byte to be processed in inbuf */
-static unsigned outcnt; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Tracecv(c,x)
#endif
-static int fill_inbuf(void);
-static void flush_window(void);
static void error(char *m);
extern char input_data[];
extern char input_data_end[];
-static uch *output_data;
-static ulg output_ptr;
-static ulg bytes_out;
+static unsigned char *output_data;
+static unsigned long output_ptr;
static void error(char *m);
static void putstr(const char *);
-extern int end;
-static ulg free_mem_ptr;
-static ulg free_mem_end_ptr;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
#ifdef STANDALONE_DEBUG
#define NO_INFLATE_MALLOC
#define ARCH_HAS_DECOMP_WDOG
-#include "../../../../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-int fill_inbuf(void)
-{
- if (insize != 0)
- error("ran out of input data");
-
- inbuf = input_data;
- insize = &input_data_end[0] - &input_data[0];
-
- inptr = 1;
- return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window(void)
-{
- ulg c = crc;
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
- putstr(".");
-}
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
#ifndef arch_error
#define arch_error(x)
while(1); /* Halt */
}
+asmlinkage void __div0(void)
+{
+ error("Attempting division by 0!");
+}
+
#ifndef STANDALONE_DEBUG
-ulg
-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
- int arch_id)
+unsigned long
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+ unsigned long free_mem_ptr_end_p,
+ int arch_id)
{
- output_data = (uch *)output_start; /* Points to kernel start */
+ unsigned char *tmp;
+
+ output_data = (unsigned char *)output_start;
free_mem_ptr = free_mem_ptr_p;
free_mem_end_ptr = free_mem_ptr_end_p;
__machine_arch_type = arch_id;
arch_decomp_setup();
- makecrc();
+ tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+ output_ptr = get_unaligned_le32(tmp);
+
putstr("Uncompressing Linux...");
- gunzip();
+ decompress(input_data, input_data_end - input_data,
+ NULL, NULL, output_data, NULL, error);
putstr(" done, booting the kernel.\n");
return output_ptr;
}
{
output_data = output_buffer;
- makecrc();
putstr("Uncompressing Linux...");
- gunzip();
+ decompress(input_data, input_data_end - input_data,
+ NULL, NULL, output_data, NULL, error);
putstr("done.\n");
return 0;
}
#endif
-
+++ /dev/null
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/arm/boot/compressed/piggy.gz"
- .globl input_data_end
-input_data_end:
--- /dev/null
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/arm/boot/compressed/piggy.gzip"
+ .globl input_data_end
+input_data_end:
--- /dev/null
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/arm/boot/compressed/piggy.lzo"
+ .globl input_data_end
+input_data_end:
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan 6 00:01:36 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_AB3100=y
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_AB3100=y
#
# DMA Devices
#
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
* Please note that the implementation of these, and the required
* effects are cache-type (VIVT/VIPT/PIPT) specific.
*
- * flush_cache_kern_all()
+ * flush_kern_all()
*
* Unconditionally clean and invalidate the entire cache.
*
- * flush_cache_user_mm(mm)
+ * flush_user_all()
*
* Clean and invalidate all user space cache entries
* before a change of page tables.
*
- * flush_cache_user_range(start, end, flags)
+ * flush_user_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the
* specified address space before a change of page tables.
* - start - virtual start address
* - end - virtual end address
*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * flush_kern_dcache_area(kaddr, size)
+ *
+ * Ensure that the data held in page is written back.
+ * - kaddr - page address
+ * - size - region size
+ *
* DMA Cache Coherency
* ===================
*
#define __ASM_ARM_CPU_H
#include <linux/percpu.h>
+#include <linux/cpu.h>
struct cpuinfo_arm {
struct cpu cpu;
#define NO_DMA 255
#endif
+#endif /* CONFIG_ISA_DMA_API */
+
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy (0)
#endif
-#endif /* CONFIG_ISA_DMA_API */
-
#endif /* __ASM_ARM_DMA_H */
* stack during a system call. Note that sizeof(struct pt_regs)
* has to be a multiple of 8.
*/
+#ifndef __KERNEL__
struct pt_regs {
long uregs[18];
};
+#else /* __KERNEL__ */
+struct pt_regs {
+ unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
#define ARM_cpsr uregs[16]
#define ARM_pc uregs[15]
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
/*
* The following SWIs are ARM private.
1002:
.endm
+#elif defined(CONFIG_CPU_V7)
+
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+busy: mrc p14, 0, pc, c0, c1, 0
+ bcs busy
+ .endm
+
+ .macro waituart, rd, rx
+wait: mrc p14, 0, pc, c0, c1, 0
+ bcs wait
+
+ .endm
+
#elif defined(CONFIG_CPU_XSCALE)
.macro addruart, rx
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
- /*
- * If we have support for OABI programs, we can never allow NX
- * support - our signal syscall restart mechanism relies upon
- * being able to execute code placed on the user stack.
- */
- return 1;
-#else
return 0;
-#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
#else
-#ifdef CONFIG_SMP
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ smp_dmb
1: ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]
char buf[64];
printk("CPU: %d %s (%s %.*s)\n",
- smp_processor_id(), print_tainted(), init_utsname()->release,
+ raw_smp_processor_id(), print_tainted(),
+ init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
print_symbol("PC is at %s\n", instruction_pointer(regs));
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .i2c_adapter_id = 1,
.sub_devs = vpfe_sub_devs,
.card_name = "DM355 EVM",
.ccdc = "DM355 CCDC",
.bus_delay = 0 /* usec */,
};
-#ifdef CONFIG_KEYBOARD_DAVINCI
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+ return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
static unsigned short dm365evm_keymap[] = {
KEY_KP2,
KEY_LEFT,
};
static struct davinci_ks_platform_data dm365evm_ks_data = {
+ .device_enable = dm365evm_keyscan_enable,
.keymap = dm365evm_keymap,
.keymapsize = ARRAY_SIZE(dm365evm_keymap),
.rep = 1,
.interval = 0x2,
.matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
};
-#endif
static int cpld_mmc_get_cd(int module)
{
dm365_init_asp(&dm365_evm_snd_data);
dm365_init_rtc();
-
-#ifdef CONFIG_KEYBOARD_DAVINCI
dm365_init_ks(&dm365evm_ks_data);
-#endif
}
static __init void dm365_evm_irq_init(void)
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .i2c_adapter_id = 1,
.sub_devs = vpfe_sub_devs,
.card_name = "DM6446 EVM",
.ccdc = "DM6446 CCDC",
return 0;
}
+/*
+ * Faking this allows us to to work with suspend functions of
+ * generic drivers which call {enable|disable}_irq_wake for
+ * wake up interrupt sources (eg RTC on DA850).
+ */
+static int cp_intc_set_wake(unsigned int irq, unsigned int on)
+{
+ return 0;
+}
+
static struct irq_chip cp_intc_irq_chip = {
.name = "cp_intc",
.ack = cp_intc_ack_irq,
.mask = cp_intc_mask_irq,
.unmask = cp_intc_unmask_irq,
.set_type = cp_intc_set_irq_type,
+ .set_wake = cp_intc_set_wake,
};
void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
int da8xx_register_rtc(void)
{
+ int ret;
+
/* Unlock the rtc's registers */
__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
- return platform_device_register(&da8xx_rtc_device);
+ ret = platform_device_register(&da8xx_rtc_device);
+ if (!ret)
+ /* Atleast on DA850, RTC is a wakeup source */
+ device_init_wakeup(&da8xx_rtc_device.dev, true);
+
+ return ret;
}
static struct resource da8xx_cpuidle_resources[] = {
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
{
- davinci_cfg_reg(DM365_KEYSCAN);
dm365_ks_device.dev.platform_data = pdata;
platform_device_register(&dm365_ks_device);
}
};
struct davinci_ks_platform_data {
+ int (*device_enable)(struct device *dev);
unsigned short *keymap;
u32 keymapsize;
u8 rep:1;
UART[UART_TX] = c;
}
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
/*
* nothing to do
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
*/
kirkwood_init();
+ orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+ if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+ gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+ pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6192_ge00_data);
kirkwood_sata_init(&rd88f6192_sata_data);
#include <mach/hardware.h>
#include <mach/clocks.h>
#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
struct module;
#include "common.h"
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
GPIO47_UART2_RXD,
struct mpu_rate * ptr;
unsigned long dpll1_rate, ref_rate;
- dpll1_rate = clk_get_rate(ck_dpll1_p);
- ref_rate = clk_get_rate(ck_ref_p);
+ dpll1_rate = ck_dpll1_p->rate;
+ ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
long highest_rate;
unsigned long ref_rate;
- ref_rate = clk_get_rate(ck_ref_p);
+ ref_rate = ck_ref_p->rate;
highest_rate = -EINVAL;
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
- CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
- CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
+ CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
* init
*/
-static struct clk_functions omap1_clk_functions __initdata = {
+static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/spi/spi.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include <plat/omap7xx.h>
/*-------------------------------------------------------------------------*/
/*-------------------------------------------------------------------------*/
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+ .name = "omap1_spi100k",
+ .id = 1,
+};
+
+struct platform_device omap_spi2 = {
+ .name = "omap1_spi100k",
+ .id = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+ omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+ if (omap_spi1.dev.platform_data)
+ platform_device_register(&omap_spi1);
+
+ omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+ if (omap_spi2.dev.platform_data)
+ platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE 0xfffea000
omap_init_mbox();
omap_init_rtc();
+ omap_init_spi100k();
omap_init_sti();
return 0;
/* I2C interface */
MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0)
+MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0)
+MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
+MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
+MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
+MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
KEY(5, 1, KEY_H),
KEY(5, 2, KEY_J),
KEY(5, 3, KEY_F3),
+ KEY(5, 4, KEY_UNKNOWN),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(5, 6, KEY_M),
- KEY(5, 7, KEY_ENTER),
+ KEY(5, 7, KEY_RIGHT),
KEY(6, 0, KEY_Q),
KEY(6, 1, KEY_A),
KEY(6, 2, KEY_N),
KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
- KEY(6, 7, KEY_SELECT),
+ KEY(6, 7, KEY_UP),
KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
- KEY(7, 5, KEY_RIGHT),
- KEY(7, 6, KEY_UP),
+ KEY(7, 6, KEY_SELECT),
KEY(7, 7, KEY_DOWN)
};
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
*/
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
- struct prcm_config *prcm;
+ const struct prcm_config *prcm;
+ long sys_ck_rate;
int i = 0;
+ int tbl_sz = 0;
+
+ sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck.rate)
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
- freq_table[i].index = i;
- freq_table[i].frequency = prcm->mpu_speed / 1000;
- i++;
+ tbl_sz++;
}
- if (i == 0) {
- printk(KERN_WARNING "%s: failed to initialize frequency "
- "table\n", __func__);
+ /*
+ * XXX Ensure that we're doing what CPUFreq expects for this error
+ * case and the following one
+ */
+ if (tbl_sz == 0) {
+ pr_warning("%s: no matching entries in rate_table\n",
+ __func__);
+ return;
+ }
+
+ /* Include the CPUFREQ_TABLE_END terminator entry */
+ tbl_sz++;
+
+ freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+ GFP_ATOMIC);
+ if (!freq_table) {
+ pr_err("%s: could not kzalloc frequency table\n", __func__);
return;
}
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = prcm->mpu_speed / 1000;
+ i++;
+ }
+
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ kfree(freq_table);
+}
+
#endif
struct clk_functions omap2_clk_functions = {
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+ .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};
#include <asm/div64.h>
#include <asm/clkdev.h>
-#include <plat/sdrc.h>
#include "clock.h"
#include "clock34xx.h"
#include "sdrc.h"
.name = "dpll4_m3x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m3_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
.flags = INVERT_ENABLE,
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
.recalc = &omap2_clksel_recalc,
};
.name = "dpll4_m6x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m6_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
.flags = INVERT_ENABLE,
.name = "iva2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll2_m2_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clkdm_name = "iva2_clkdm",
.name = "gfx_l3_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
.recalc = &followparent_recalc,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
};
static const struct clksel mcbsp_234_clksel[] = {
- { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+ { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
{ .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};
};
static const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 3, .val = 2, .flags = RATE_IN_4430 },
- { .div = 4, .val = 3, .flags = RATE_IN_4430 },
- { .div = 5, .val = 4, .flags = RATE_IN_4430 },
- { .div = 6, .val = 5, .flags = RATE_IN_4430 },
- { .div = 7, .val = 6, .flags = RATE_IN_4430 },
- { .div = 8, .val = 7, .flags = RATE_IN_4430 },
- { .div = 9, .val = 8, .flags = RATE_IN_4430 },
- { .div = 10, .val = 9, .flags = RATE_IN_4430 },
- { .div = 11, .val = 10, .flags = RATE_IN_4430 },
- { .div = 12, .val = 11, .flags = RATE_IN_4430 },
- { .div = 13, .val = 12, .flags = RATE_IN_4430 },
- { .div = 14, .val = 13, .flags = RATE_IN_4430 },
- { .div = 15, .val = 14, .flags = RATE_IN_4430 },
- { .div = 16, .val = 15, .flags = RATE_IN_4430 },
- { .div = 17, .val = 16, .flags = RATE_IN_4430 },
- { .div = 18, .val = 17, .flags = RATE_IN_4430 },
- { .div = 19, .val = 18, .flags = RATE_IN_4430 },
- { .div = 20, .val = 19, .flags = RATE_IN_4430 },
- { .div = 21, .val = 20, .flags = RATE_IN_4430 },
- { .div = 22, .val = 21, .flags = RATE_IN_4430 },
- { .div = 23, .val = 22, .flags = RATE_IN_4430 },
- { .div = 24, .val = 23, .flags = RATE_IN_4430 },
- { .div = 25, .val = 24, .flags = RATE_IN_4430 },
- { .div = 26, .val = 25, .flags = RATE_IN_4430 },
- { .div = 27, .val = 26, .flags = RATE_IN_4430 },
- { .div = 28, .val = 27, .flags = RATE_IN_4430 },
- { .div = 29, .val = 28, .flags = RATE_IN_4430 },
- { .div = 30, .val = 29, .flags = RATE_IN_4430 },
- { .div = 31, .val = 30, .flags = RATE_IN_4430 },
+ { .div = 1, .val = 1, .flags = RATE_IN_4430 },
+ { .div = 2, .val = 2, .flags = RATE_IN_4430 },
+ { .div = 3, .val = 3, .flags = RATE_IN_4430 },
+ { .div = 4, .val = 4, .flags = RATE_IN_4430 },
+ { .div = 5, .val = 5, .flags = RATE_IN_4430 },
+ { .div = 6, .val = 6, .flags = RATE_IN_4430 },
+ { .div = 7, .val = 7, .flags = RATE_IN_4430 },
+ { .div = 8, .val = 8, .flags = RATE_IN_4430 },
+ { .div = 9, .val = 9, .flags = RATE_IN_4430 },
+ { .div = 10, .val = 10, .flags = RATE_IN_4430 },
+ { .div = 11, .val = 11, .flags = RATE_IN_4430 },
+ { .div = 12, .val = 12, .flags = RATE_IN_4430 },
+ { .div = 13, .val = 13, .flags = RATE_IN_4430 },
+ { .div = 14, .val = 14, .flags = RATE_IN_4430 },
+ { .div = 15, .val = 15, .flags = RATE_IN_4430 },
+ { .div = 16, .val = 16, .flags = RATE_IN_4430 },
+ { .div = 17, .val = 17, .flags = RATE_IN_4430 },
+ { .div = 18, .val = 18, .flags = RATE_IN_4430 },
+ { .div = 19, .val = 19, .flags = RATE_IN_4430 },
+ { .div = 20, .val = 20, .flags = RATE_IN_4430 },
+ { .div = 21, .val = 21, .flags = RATE_IN_4430 },
+ { .div = 22, .val = 22, .flags = RATE_IN_4430 },
+ { .div = 23, .val = 23, .flags = RATE_IN_4430 },
+ { .div = 24, .val = 24, .flags = RATE_IN_4430 },
+ { .div = 25, .val = 25, .flags = RATE_IN_4430 },
+ { .div = 26, .val = 26, .flags = RATE_IN_4430 },
+ { .div = 27, .val = 27, .flags = RATE_IN_4430 },
+ { .div = 28, .val = 28, .flags = RATE_IN_4430 },
+ { .div = 29, .val = 29, .flags = RATE_IN_4430 },
+ { .div = 30, .val = 30, .flags = RATE_IN_4430 },
+ { .div = 31, .val = 31, .flags = RATE_IN_4430 },
{ .div = 0 },
};
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
if (atomic_inc_return(&clkdm->usecount) > 1)
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
#ifdef DEBUG
local_irq_enable();
local_fiq_enable();
- return (u32)timespec_to_ns(&ts_idle)/1000;
+ return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}
/**
BUG();
}
+ clk_enable(gpmc_l3_clk);
+
l = gpmc_read_reg(GPMC_REVISION);
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
/* Set smart idle mode and automatic L3 clock gating */
u16 hawkeye;
u8 rev;
+ omap_chip.oc = CHIP_IS_OMAP3430;
+
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES1;
return;
}
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
break;
case 4:
+ omap_revision = OMAP3430_REV_ES3_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ break;
+ case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
- omap_revision = OMAP3430_REV_ES3_1;
+ omap_revision = OMAP3430_REV_ES3_1_2;
+
+ /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
}
break;
case 0xb868:
*
* Set the device to be OMAP3505 here. Actual device
* is identified later based on the features.
+ *
+ * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
omap_revision = OMAP3505_REV(rev);
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 0xb891:
/* FALLTHROUGH */
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3630ES1;
}
}
omap3_check_revision();
omap3_check_features();
omap3_cpuinfo();
+ return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
return;
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
+ return;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
- } else if (cpu_is_omap343x()) {
- omap_chip.oc = CHIP_IS_OMAP3430;
- if (omap_rev() == OMAP3430_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
- omap_rev() <= OMAP3430_REV_ES2_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
- else if (omap_rev() == OMAP3430_REV_ES3_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
- else if (omap_rev() == OMAP3430_REV_ES3_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
- else if (omap_rev() == OMAP3630_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
- } else {
- pr_err("Uninitialized omap_chip, please fix!\n");
+ return;
}
+
+ pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
-#include <plat/mux.h>
#include <plat/vram.h>
#include "clock.h"
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
- .virtual = DSP_MEM_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
- .length = DSP_MEM_24XX_SIZE,
+ .virtual = DSP_MEM_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
+ .length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_IPI_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
- .length = DSP_IPI_24XX_SIZE,
+ .virtual = DSP_IPI_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
+ .length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_MMU_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
- .length = DSP_MMU_24XX_SIZE,
+ .virtual = DSP_MMU_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
+ .length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
}
/* MIRs are saved and restore with other PRCM registers */
}
+
+void omap3_intc_suspend(void)
+{
+ /* A pending interrupt would prevent OMAP from entering suspend */
+ omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+ /* Disable autoidle as it can stall interrupt controller */
+ intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+ /* Re-enable autoidle */
+ intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
#endif /* CONFIG_ARCH_OMAP3 */
static unsigned long mux_phys;
static void __iomem *mux_base;
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
{
if (cpu_is_omap24xx())
return __raw_readb(mux_base + reg);
return __raw_readw(mux_base + reg);
}
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
{
if (cpu_is_omap24xx())
__raw_writeb(val, mux_base + reg);
__raw_writew(val, mux_base + reg);
}
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+ while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
+ omap_mux_write(board_mux->value, board_mux->reg_offset);
+ board_mux++;
+ }
+}
+
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
kfree(options);
}
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
- while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
- omap_mux_write(board_mux->value, board_mux->reg_offset);
- board_mux++;
- }
-}
-
static int __init omap_mux_copy_names(struct omap_mux *src,
struct omap_mux *dst)
{
}
#ifdef CONFIG_OMAP_MUX
- omap_mux_package_fixup(package_subset, superset);
- omap_mux_package_init_balls(package_balls, superset);
- omap_mux_set_cmdline_signals();
- omap_mux_set_board_signals(board_mux);
+ if (package_subset)
+ omap_mux_package_fixup(package_subset, superset);
+ if (package_balls)
+ omap_mux_package_init_balls(package_balls, superset);
#endif
omap_mux_init_list(superset);
+#ifdef CONFIG_OMAP_MUX
+ omap_mux_set_cmdline_signals();
+ omap_mux_write_array(board_mux);
+#endif
+
return 0;
}
*/
void omap_mux_set_gpio(u16 val, int gpio);
+/**
+ * omap_mux_read() - read mux register
+ * @mux_offset: Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val: New mux register value
+ * @mux_offset: Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table
oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
- oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+ if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+ oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
return 0;
}
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips. Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available. There are quite a
+ * few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
/*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available. There are
+ * quite a few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
regs[reg_count++].val = \
__raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
-static int __init pm_dbg_init(void);
-
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
struct reg {
static int pm_dbg_init_done;
+static int __init pm_dbg_init(void);
+
enum {
DEBUG_FILE_COUNTERS = 0,
DEBUG_FILE_TIMERS,
static int pwrdm_suspend_get(void *data, u64 *val)
{
- *val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+ int ret;
+ ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+ *val = ret;
- if (*val >= 0)
+ if (ret >= 0)
return 0;
return *val;
}
}
arch_initcall(pm_dbg_init);
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
#endif
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
-#define omap2_pm_dump(mode, resume, us) do {} while (0);
-#define omap2_pm_debug 0
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
control_padconf_off |= START_PADCONF_SAVE;
omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
/* wait for the save to complete */
- while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
- & PADCONF_SAVE_DONE)
- ;
+ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+ & PADCONF_SAVE_DONE))
+ udelay(1);
+
+ /*
+ * Force write last pad into memory, as this can fail in some
+ * cases according to erratas 1.157, 1.185
+ */
+ omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+ OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
/* Save the Interrupt controller context */
omap_intc_save_context();
/* Save the GPMC context */
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
+ omap3_intc_prepare_idle();
/*
* On EMU/HS devices ROM code restores a SRDC value
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
+ omap3_intc_resume_idle();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
}
omap_uart_prepare_suspend();
+ omap3_intc_suspend();
+
omap_sram_idle();
restore:
CM_AUTOIDLE);
}
+ omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
/*
* Set all plls to autoidle. This is needed until autoidle is
* enabled by clockfw
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ /* Enable PM_WKEN to support DSS LPR */
+ prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+ OMAP3430_DSS_MOD, PM_WKEN);
+
/* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+ OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+ OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+ OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+ OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- /* Don't attach IVA interrupts */
- prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
- /* Clear any pending 'reset' flags */
- prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
omap3_iva_idle();
omap3_d2d_idle();
}
u32 iva2_cm_clksel2;
u32 cm_sysconfig;
u32 sgx_cm_clksel;
- u32 wkup_cm_clksel;
u32 dss_cm_clksel;
u32 cam_cm_clksel;
u32 per_cm_clksel;
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
- u32 pll_cm_clken;
u32 pll_cm_clken2;
u32 cm_polctrl;
u32 iva2_cm_fclken;
u32 usbhost_cm_iclken;
u32 iva2_cm_autiidle2;
u32 mpu_cm_autoidle2;
- u32 pll_cm_autoidle;
u32 iva2_cm_clkstctrl;
u32 mpu_cm_clkstctrl;
u32 core_cm_clkstctrl;
prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
prcm_context.sgx_cm_clksel =
cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
- prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_context.dss_cm_clksel =
cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
prcm_context.cam_cm_clksel =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
prcm_context.pll_cm_clksel5 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
- prcm_context.pll_cm_clken =
- cm_read_mod_reg(PLL_MOD, CM_CLKEN);
prcm_context.pll_cm_clken2 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
prcm_context.mpu_cm_autoidle2 =
cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
- prcm_context.pll_cm_autoidle =
- cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
prcm_context.iva2_cm_clkstctrl =
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
prcm_context.mpu_cm_clkstctrl =
__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
CM_CLKSEL);
- cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
CM_CLKSEL);
cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
OMAP3430ES2_CM_CLKSEL4);
cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
OMAP3430ES2_CM_CLKSEL5);
- cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
OMAP3430ES2_CM_CLKEN2);
__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
- cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
#define OMAP44XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
#include "prm44xx.h"
/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
#endif
}
};
#endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
{
if (UART_RX == offset) {
unsigned int lsr;
- lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+ lsr = __serial_read_reg(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
return -EPERM;
}
- return serial_read_reg(omap_uart[up->line].p, offset);
+
+ return __serial_read_reg(up, offset);
}
void __init omap_serial_early_init(void)
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
- adr r3, write_aux_control_params @ r3 points to parameters
+ ldr r4, scratchpad_base
+ ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
-write_aux_control_params:
- .word 0x1, 0x72
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
smi: .word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
- mov r0, #0x72
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
+ adds r3, r3, #8
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
save_context_wfi:
/*b save_context_wfi*/ @ enable to debug save code
mov r8, r0 /* Store SDRAM address in r8 */
+ mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
+ mov r4, #0x1 @ Number of parameters for restore call
+ stmia r8!, {r4-r5}
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#define DNS323_GPIO_LED_RIGHT_AMBER 1
#define DNS323_GPIO_LED_LEFT_AMBER 2
+#define DNS323_GPIO_SYSTEM_UP 3
#define DNS323_GPIO_LED_POWER 5
#define DNS323_GPIO_OVERTEMP 6
#define DNS323_GPIO_RTC 7
{
.name = "power:blue",
.gpio = DNS323_GPIO_LED_POWER,
- .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "right:amber",
.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
{ 0, MPP_UNUSED },
{ 1, MPP_GPIO }, /* right amber LED (sata ch0) */
{ 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_UNUSED },
+ { 3, MPP_GPIO }, /* system up flag */
{ 4, MPP_GPIO }, /* power button LED */
{ 5, MPP_GPIO }, /* power button LED */
{ 6, MPP_GPIO }, /* GMT G751-2f overtemp */
},
};
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
{
pr_info("%s: triggering power-off...\n", __func__);
gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
}
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ /* Pin has to be changed to 1 and back to 0 to do actual power off. */
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+ mdelay(100);
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
static void __init dns323_init(void)
{
/* Setup basic Orion functions. Need to be called early. */
if (dns323_dev_id() == MV88F5182_DEV_ID)
orion5x_sata_init(&dns323_sata_data);
- /* register dns323 specific power-off method */
+ /* The 5182 has flag to indicate the system is up. Without this flag
+ * set, power LED will flash and cannot be controlled via leds-gpio.
+ */
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+ /* Register dns323 specific power-off method */
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS323: failed to setup power-off GPIO\n");
- pm_power_off = dns323_power_off;
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ pm_power_off = dns323b_power_off;
+ else
+ pm_power_off = dns323a_power_off;
}
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include "common.h"
#include "mpp.h"
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+ {
+ .name = "wrt350nv2:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:green:security",
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:orange:power",
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:green:usb",
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .name = "wrt350nv2:green:wireless",
+ .gpio = 7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+ .leds = wrt350n_v2_led_pins,
+ .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wrt350n_v2_led_data,
+ },
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 3,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_WLAN,
+ .gpio = 2,
+ .desc = "WPS Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+ .buttons = wrt350n_v2_buttons,
+ .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &wrt350n_v2_button_data,
+ },
+};
+
+/*
+ * General setup
+ */
static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
{ 0, MPP_GPIO }, /* Power LED green (0=on) */
{ 1, MPP_GPIO }, /* Security LED (0=on) */
orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
+ platform_device_register(&wrt350n_v2_leds);
+ platform_device_register(&wrt350n_v2_button_device);
}
static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
+ select CPU_PXA300
+ select CPU_PXA310
select PXA_SSP
config MACH_TAVOREVB
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ .gpio_vbus = -1,
/* no connect GPIO; corgi can't tell connection status */
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
#define cpu_is_pxa930() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa930(id); \
+ __cpu_is_pxa930(read_cpuid_id()); \
})
#define cpu_is_pxa935() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa935(id); \
+ __cpu_is_pxa935(read_cpuid_id()); \
})
#define cpu_is_pxa950() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa950(id); \
+ __cpu_is_pxa950(read_cpuid_id()); \
})
#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
/* USB */
#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif /* CONFIG_CPU_PXA26x */
#endif /* __ASM_ARCH_MFP_PXA25X_H */
/* the following variables are processor specific and initialized
* by the corresponding zylonite_pxa3xx_init()
*/
-struct platform_mmc_slot {
- int gpio_cd;
- int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
extern int gpio_eth_irq;
extern int gpio_debug_led1;
extern int gpio_debug_led2;
saved_icmr[i] = _ICMR(irq);
_ICMR(irq) = 0;
}
- for (i = 0; i < pxa_internal_irq_nr; i++)
- saved_ipr[i] = IPR(i);
+
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ saved_ipr[i] = IPR(i);
+ }
return 0;
}
{
int i, irq = PXA_IRQ(0);
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ IPR(i) = saved_ipr[i];
+ }
+
for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
_ICMR(irq) = saved_icmr[i];
_ICLR(irq) = 0;
}
- for (i = 0; i < pxa_internal_irq_nr; i++)
- IPR(i) = saved_ipr[i];
ICCR = 1;
return 0;
GPIO7_MMC1_CLK,
GPIO8_MMC1_CMD,
GPIO15_GPIO, /* card detect */
+
+ /* UART3 */
+ GPIO107_UART3_CTS,
+ GPIO108_UART3_RTS,
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD,
};
static struct resource smc91x_resources[] = {
return ret;
}
-static int magician_backlight_notify(int brightness)
+static int magician_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
return ret;
}
-static int palmld_backlight_notify(int brightness)
+static int palmld_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
return ret;
}
-static int palmt5_backlight_notify(int brightness)
+static int palmt5_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
return ret;
}
-static int palmtc_backlight_notify(int brightness)
+static int palmtc_backlight_notify(struct device *dev, int brightness)
{
/* backlight is on when GPIO16 AF0 is high */
gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
return ret;
}
-static int palmte2_backlight_notify(int brightness)
+static int palmte2_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
return ret;
}
-static int treo_backlight_notify(int brightness)
+static int treo_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
return TREO_MAX_INTENSITY - brightness;
return ret;
}
-static int palmtx_backlight_notify(int brightness)
+static int palmtx_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
return ret;
}
-static int palmz72_backlight_notify(int brightness)
+static int palmz72_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
.init = poodle_mci_init,
.setpower = poodle_mci_setpower,
.exit = poodle_mci_exit,
- .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT,
+ .gpio_card_detect = POODLE_GPIO_nSD_DETECT,
.gpio_card_ro = POODLE_GPIO_nSD_WP,
.gpio_power = -1,
};
.type = EV_SW,
.code = 0,
.gpio = SPITZ_GPIO_SWA,
- .desc = "Display Down",
+ .desc = "Display Down",
},
{
.type = EV_SW,
.code = 1,
.gpio = SPITZ_GPIO_SWB,
- .desc = "Lid Closed",
+ .desc = "Lid Closed",
},
};
return ret;
}
-static int viper_backlight_notify(int brightness)
+static int viper_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
}
-int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
- unsigned ngpio, void *context)
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+ /* Power supply is always present */
+ info->ac_line_status = APM_AC_ONLINE;
+ info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+ info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+ apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+ unsigned ngpio, void *context)
{
int i;
u8 pcb_info = 0;
GPIO99_GPIO, /* CF RDY */
};
+/*
+ * DM9k MSCx settings: SRAM, 16 bits
+ * 17 cycles delay first access
+ * 5 cycles delay next access
+ * 13 cycles recovery time
+ * faster device
+ */
+#define DM9K_MSC_VALUE 0xe4c9
+
static void __init zeus_init(void)
{
- u16 dm9000_msc = 0xe279;
+ u16 dm9000_msc = DM9K_MSC_VALUE;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
pm_power_off = zeus_power_off;
+ zeus_setup_apm();
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
#include "devices.h"
#include "generic.h"
-#define MAX_SLOTS 3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
int gpio_eth_irq;
int gpio_debug_led1;
int gpio_debug_led2;
#endif
#if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
-
- return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
- irq_handler_t zylonite_detect_int,
- void *data)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int err, cd_irq, gpio_cd, gpio_wp;
-
- cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
- gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
- gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
- /*
- * setup GPIO for Zylonite MMC controller
- */
- err = gpio_request(gpio_cd, "mmc card detect");
- if (err)
- goto err_request_cd;
- gpio_direction_input(gpio_cd);
-
- err = gpio_request(gpio_wp, "mmc write protect");
- if (err)
- goto err_request_wp;
- gpio_direction_input(gpio_wp);
-
- err = request_irq(cd_irq, zylonite_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: MMC/SD/SDIO: "
- "can't request card detect IRQ\n", __func__);
- goto err_request_irq;
- }
-
- return 0;
-
-err_request_irq:
- gpio_free(gpio_wp);
-err_request_wp:
- gpio_free(gpio_cd);
-err_request_cd:
- return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int cd_irq, gpio_cd, gpio_wp;
-
- cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
- gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
- gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
- free_irq(cd_irq, data);
- gpio_free(gpio_cd);
- gpio_free(gpio_wp);
-}
-
static struct pxamci_platform_data zylonite_mci_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = zylonite_mci_init,
- .exit = zylonite_mci_exit,
- .get_ro = zylonite_mci_ro,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
+ .gpio_card_detect = EXT_GPIO(0),
+ .gpio_card_ro = EXT_GPIO(2),
.gpio_power = -1,
};
static struct pxamci_platform_data zylonite_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(1),
+ .gpio_card_ro = EXT_GPIO(3),
+ .gpio_power = -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(30),
+ .gpio_card_ro = EXT_GPIO(31),
+ .gpio_power = -1,
};
static void __init zylonite_init_mmc(void)
pxa_set_mci_info(&zylonite_mci_platform_data);
pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
if (cpu_is_pxa310())
- pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+ pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
}
#else
static inline void zylonite_init_mmc(void) {}
GPIO22_I2C_SDA,
/* GPIO */
- GPIO18_GPIO, /* GPIO Expander #0 INT_N */
- GPIO19_GPIO, /* GPIO Expander #1 INT_N */
+ GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
/* detect LCD panel */
zylonite_detect_lcd_panel();
- /* MMC card detect & write protect for controller 0 */
- zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0);
- zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2);
-
/* WM9713 IRQ */
wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
if (cpu_is_pxa310()) {
pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
- /* MMC card detect & write protect for controller 2 */
- zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
- zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
}
/* GPIOs for Debug LEDs */
gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
- /* MMC card detect & write protect for controller 0 */
- zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1);
- zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5);
-
/* WM9713 IRQ */
wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
}
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
/*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
*/
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100
#endif /* __ASM_ARCH_BOARD_PB1176_H */
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */
/*
* REALVIEW_SYS_FLASH
.init = realview_eb_timer_init,
};
+static void realview_eb_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ if (core_tile_eb11mp())
+ __raw_writel(0x0008, reset_ctrl);
+}
+
static void __init realview_eb_init(void)
{
int i;
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_eb_reset;
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
static void realview_pb1176_reset(char mode)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_RESETCTL_OFFSET;
- void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_LOCK_OFFSET;
- __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
- __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
}
static void realview_pb1176_fixup(struct machine_desc *mdesc,
static void realview_pb11mp_reset(char mode)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_RESETCTL_OFFSET;
- unsigned int val;
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
- val = __raw_readl(hdr_ctrl);
- val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
- __raw_writel(val, hdr_ctrl);
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
}
static void __init realview_pb11mp_init(void)
.init = realview_pba8_timer_init,
};
+static void realview_pba8_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
+}
+
static void __init realview_pba8_init(void)
{
int i;
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pba8_reset;
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
#endif
}
+static void realview_pbx_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x00F0, reset_ctrl);
+ __raw_writel(0x00F4, reset_ctrl);
+}
+
static void __init realview_pbx_init(void)
{
int i;
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pbx_reset;
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
--- /dev/null
+/* linux/include/asm/arch-s3c2410/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+ int delay;
+ int presc;
+ int oversampling_shift;
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+#endif /* __ASM_ARM_TS_H */
.name = "SmartMedia",
.nr_chips = 1,
.nr_map = smartmedia_map,
+ .options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
.name = "chip2",
.nr_chips = 1,
.nr_map = chip2_map,
+ .options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
}
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
+#include <mach/ts.h>
#include <plat/udc.h>
#include <plat/iic.h>
.vbus_pin_inverted = 1,
};
+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
/**
* Set lcd on or off
};
static struct platform_device *h1940_devices[] __initdata = {
+ &s3c_device_ts,
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+ s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
/* DM9000AEP 10/100 ethernet controller */
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
[0] = {
.start = MACH_MINI2440_DM9K_BASE,
.end = MACH_MINI2440_DM9K_BASE + 3,
* The DM9000 has no eeprom, and it's MAC address is set by
* the bootloader before starting the kernel.
*/
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
* | | +----+ +----+
* .....
*/
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
{
.gpio = S3C2410_GPG(0), /* K1 */
.code = KEY_F1,
#endif
};
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
.buttons = mini2440_buttons,
.nbuttons = ARRAY_SIZE(mini2440_buttons),
};
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
/* LEDS */
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "heartbeat",
};
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "nand-disk",
};
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "mmc0",
};
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
.name = "led4",
.gpio = S3C2410_GPB(8),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "",
};
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
.name = "backlight",
.gpio = S3C2410_GPG(4),
.def_trigger = "backlight",
};
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
.name = "s3c24xx_led",
.id = 1,
.dev = {
},
};
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
.name = "s3c24xx_led",
.id = 2,
.dev = {
},
};
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
.name = "s3c24xx_led",
.id = 3,
.dev = {
},
};
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
.name = "s3c24xx_led",
.id = 4,
.dev = {
},
};
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
.name = "s3c24xx_led",
.id = 5,
.dev = {
/* AUDIO */
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
.l3_clk = S3C2410_GPB(4),
.l3_mode = S3C2410_GPB(2),
.l3_data = S3C2410_GPB(3),
.model = UDA134X_UDA1341
};
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
.name = "s3c24xx_uda134x",
.id = 0,
.dev = {
.name = "External",
.nr_chips = 1,
.nr_map = external_map,
+ .options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
.partitions = osiris_default_nand_part,
},
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
.partitions = osiris_default_nand_part,
},
return ret;
}
-static int hmt_bl_notify(int brightness)
+static int hmt_bl_notify(struct device *dev, int brightness)
{
/*
* translate from CIELUV/CIELAB L*->brightness, E.G. from
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
+ .gpio = -EINVAL,
};
static struct platform_device smdk6410_b_pwr_5v = {
*
*/
+#include <linux/io.h>
#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define WTCR (TMR_BA + 0x1C)
+#define WTCLK (1 << 10)
+#define WTE (1 << 7)
+#define WTRE (1 << 1)
static void arch_idle(void)
{
static void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ __raw_writel(WTE | WTRE | WTCLK, WTCR);
+ }
}
#define TICKS_PER_SEC 100
#define PRESCALE 0x63 /* Divider = prescale + 1 */
-unsigned int timer0_load;
+#define TDR_SHIFT 24
+#define TDR_MASK ((1 << TDR_SHIFT) - 1)
+
+static unsigned int timer0_load;
static void nuc900_clockevent_setmode(enum clock_event_mode mode,
struct clock_event_device *clk)
static struct clock_event_device nuc900_clockevent_device = {
.name = "nuc900-timer0",
.shift = 32,
- .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = nuc900_clockevent_setmode,
.set_next_event = nuc900_clockevent_setnextevent,
.rating = 300,
.handler = nuc900_timer0_interrupt,
};
-static void __init nuc900_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(void)
{
+ unsigned int rate;
+ struct clk *clk = clk_get(NULL, "timer0");
+
+ BUG_ON(IS_ERR(clk));
+
+ __raw_writel(0x00, REG_TCSR0);
+
+ clk_enable(clk);
+ rate = clk_get_rate(clk) / (PRESCALE + 1);
+
+ timer0_load = (rate / TICKS_PER_SEC);
+
+ __raw_writel(RESETINT, REG_TISR);
+ setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
nuc900_clockevent_device.shift);
nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
static cycle_t nuc900_get_cycles(struct clocksource *cs)
{
- return ~__raw_readl(REG_TDR1);
+ return (~__raw_readl(REG_TDR1)) & TDR_MASK;
}
static struct clocksource clocksource_nuc900 = {
.name = "nuc900-timer1",
.rating = 200,
.read = nuc900_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
+ .mask = CLOCKSOURCE_MASK(TDR_SHIFT),
+ .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void __init nuc900_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(void)
{
unsigned int val;
+ unsigned int rate;
+ struct clk *clk = clk_get(NULL, "timer1");
+
+ BUG_ON(IS_ERR(clk));
+
+ __raw_writel(0x00, REG_TCSR1);
+
+ clk_enable(clk);
+ rate = clk_get_rate(clk) / (PRESCALE + 1);
__raw_writel(0xffffffff, REG_TICR1);
val = __raw_readl(REG_TCSR1);
- val |= (COUNTEN | PERIOD);
+ val |= (COUNTEN | PERIOD | PRESCALE);
__raw_writel(val, REG_TCSR1);
clocksource_nuc900.mult =
static void __init nuc900_timer_init(void)
{
- struct clk *ck_ext = clk_get(NULL, "ext");
- unsigned int rate;
-
- BUG_ON(IS_ERR(ck_ext));
-
- rate = clk_get_rate(ck_ext);
- clk_put(ck_ext);
- rate = rate / (PRESCALE + 0x01);
-
- /* set a known state */
- __raw_writel(0x00, REG_TCSR0);
- __raw_writel(0x00, REG_TCSR1);
- __raw_writel(RESETINT, REG_TISR);
- timer0_load = (rate / TICKS_PER_SEC);
-
- setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
- nuc900_clocksource_init(rate);
- nuc900_clockevents_init(rate);
+ nuc900_clocksource_init();
+ nuc900_clockevents_init();
}
struct sys_timer nuc900_timer = {
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
+AFLAGS_abort-ev6.o :=-Wa,-march=armv6k
+AFLAGS_abort-ev7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
+AFLAGS_cache-v6.o :=-Wa,-march=armv6
+AFLAGS_cache-v7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
+AFLAGS_tlb-v6.o :=-Wa,-march=armv6
+AFLAGS_tlb-v7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
+AFLAGS_proc-v6.o :=-Wa,-march=armv6
+AFLAGS_proc-v7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
if (!cpu_is_xsc3() || !xsc3_l2_present())
return 0;
- if (!(get_cr() & CR_L2)) {
+ if (get_cr() & CR_L2) {
pr_info("XScale3 L2 cache enabled.\n");
- adjust_cr(CR_L2, CR_L2);
xsc3_l2_inv_all();
- }
- outer_cache.inv_range = xsc3_l2_inv_range;
- outer_cache.clean_range = xsc3_l2_clean_range;
- outer_cache.flush_range = xsc3_l2_flush_range;
+ outer_cache.inv_range = xsc3_l2_inv_range;
+ outer_cache.clean_range = xsc3_l2_clean_range;
+ outer_cache.flush_range = xsc3_l2_flush_range;
+ }
return 0;
}
"%dK data, %dK init, %luK highmem)\n",
nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
datasize >> 10, initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
extern int sysctl_overcommit_memory;
pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
flush_pmd_entry(pmd);
}
+
+ local_flush_tlb_all();
}
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
- *
- * It is assumed that:
*/
.align 5
ENTRY(cpu_v6_reset)
ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
- mov pc, lr
+ stmfd sp!, {lr}
+ cpsid if @ disable interrupts
+ bl v7_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x0006 @ .............ca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
ENDPROC(cpu_v7_proc_fin)
/*
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
- *
- * It is assumed that:
*/
.align 5
ENTRY(cpu_v7_reset)
adr r5, xsc3_crval
ldmia r5, {r5, r6}
+
+#ifdef CONFIG_CACHE_XSC3L2
+ mrc p15, 1, r0, c0, c0, 1 @ get L2 present information
+ ands r0, r0, #0xf8
+ orrne r6, r6, #(1 << 26) @ enable L2 if present
+#endif
+
mrc p15, 0, r0, c1, c0, 0 @ get control register
bic r0, r0, r5 @ ..V. ..R. .... ..A.
orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu)
asid r3, r3 @ mask ASID
orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
mov r1, r1, lsl #PAGE_SHIFT
- vma_vm_flags r2, r2 @ get vma->vm_flags
1:
#ifdef CONFIG_SMP
mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
UART(TXR) = ch;
}
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
#define MX1_UART1_BASE_ADDR 0x00206000
#define MX25_UART1_BASE_ADDR 0x43f90000
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
- * clock framework is not up , it is defined here to avoid rework in
- * every driver. Also dummy prcm reset function is added */
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
clk_enable(clkp);
}
}
-EXPORT_SYMBOL(clk_enable_init_clocks);
/*
* Low level helpers
arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
-EXPORT_SYMBOL(clk_init_cpufreq_table);
+
+void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_exit_cpufreq_table)
+ arch_clock->clk_exit_cpufreq_table(table);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
#endif
/*-------------------------------------------------------------------------*/
clocksource_32k.mult, clocksource_32k.shift);
}
+/**
+ * read_persistent_clock - Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer. Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+ unsigned long long nsecs;
+ cycles_t delta;
+ struct timespec *tsp = &persistent_ts;
+
+ last_cycles = cycles;
+ cycles = clocksource_32k.read(&clocksource_32k);
+ delta = cycles - last_cycles;
+
+ nsecs = clocksource_cyc2ns(delta,
+ clocksource_32k.mult, clocksource_32k.shift);
+
+ timespec_add_ns(tsp, nsecs);
+ *ts = *tsp;
+}
+
static int __init omap_init_clocksource_32k(void)
{
static char err[] __initdata = KERN_ERR
static int omap_cpu_exit(struct cpufreq_policy *policy)
{
+ clk_exit_cpufreq_table(&freq_table);
clk_put(mpu_clk);
return 0;
}
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
- (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+ (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
"before unlinking\n");
dump_stack();
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+ /* Readback to make sure write has completed */
+ omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+ /* Ack possibly pending interrupt */
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+ OMAP_TIMER_INT_OVERFLOW);
+#endif
}
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
u32 saved_risingdetect;
#endif
u32 level_mask;
+ u32 toggle_mask;
spinlock_t lock;
struct gpio_chip chip;
struct clk *dbck;
}
#endif
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once. For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base;
+ u32 l = 0;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_INT_EDGE;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_CONTROL;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_CONTROL;
+ break;
+#endif
+ default:
+ return;
+ }
+
+ l = __raw_readl(reg);
+ if ((l >> gpio) & 1)
+ l &= ~(1 << gpio);
+ else
+ l |= 1 << gpio;
+
+ __raw_writel(l, reg);
+}
+
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
void __iomem *reg = bank->base;
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
{
void __iomem *isr_reg = NULL;
u32 isr;
- unsigned int gpio_irq;
+ unsigned int gpio_irq, gpio_index;
struct gpio_bank *bank;
u32 retrigger = 0;
int unmasked = 0;
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
+ gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
if (!(isr & 1))
continue;
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * Some chips can't respond to both rising and falling
+ * at the same time. If this irq was requested with
+ * both flags, we need to flip the ICR data for the IRQ
+ * to respond to the IRQ for the opposite direction.
+ * This will be indicated in the bank toggle_mask.
+ */
+ if (bank->toggle_mask & (1 << gpio_index))
+ _toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
generic_handle_irq(gpio_irq);
}
}
struct omap_backlight_config {
int default_intensity;
int (*set_power)(struct device *dev, int state);
- int (*check_fb)(struct fb_info *fb);
};
struct omap_fbmem_config {
void (*clk_disable_unused)(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+ void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
#endif
};
extern void clk_enable_init_clocks(void);
#ifdef CONFIG_CPU_FREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
extern const struct clkops clkops_null;
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
- + ((i) >> 1) * 4 + (!(i) & 1) * 2)
+ + ((i) >> 1) * 4 + (!((i) & 1)) * 2)
#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP3430_REV_ES3_1_2 0x34305034
#define OMAP3630_REV_ES1_0 0x36300034
#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SMS_SIZE SZ_1M
-/* DSP */
-#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_24XX_VIRT 0xe0000000
-#define DSP_MEM_24XX_SIZE 0x28000
-#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_24XX_VIRT 0xe1000000
-#define DSP_IPI_24XX_SIZE SZ_4K
-#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT 0xe2000000
-#define DSP_MMU_24XX_SIZE SZ_4K
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
+ /* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT 0xfc100000
+#define DSP_MEM_2420_SIZE 0x28000
+#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
+ /* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT 0xfc128000
+#define DSP_IPI_2420_SIZE SZ_4K
+#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
+ /* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT 0xfc129000
+#define DSP_MMU_2420_SIZE SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
/*
* ----------------------------------------------------------------------------
#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SDRC_SIZE SZ_1M
-/* DSP */
-#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_34XX_VIRT 0xe0000000
-#define DSP_MEM_34XX_SIZE 0x28000
-#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_34XX_VIRT 0xe1000000
-#define DSP_IPI_34XX_SIZE SZ_4K
-#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT 0xe2000000
-#define DSP_MMU_34XX_SIZE SZ_4K
+/* 3430 IVA - currently unmapped */
/*
* ----------------------------------------------------------------------------
extern int omap_irq_pending(void);
void omap_intc_save_context(void);
void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
#endif
#include <mach/hardware.h>
/* I2C */
I2C_7XX_SCL,
I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
};
enum omap1xxx_index {
#define OMAP7XX_DSPREG_SIZE SZ_128K
#define OMAP7XX_DSPREG_START 0xE1000000
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
/*
* ----------------------------------------------------------------------------
* OMAP7XX specific configuration registers
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
#define SYSS_MISSING (1 << 7)
+#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
}
if (cpu_is_omap2420()) {
- if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
- return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
- if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
- return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
- if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
- return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+ if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
+ return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
+ if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
+ return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
+ if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
+ return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
}
if (cpu_is_omap2430()) {
if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
**/
void iommu_put(struct iommu *obj)
{
- if (!obj && IS_ERR(obj))
+ if (!obj || IS_ERR(obj))
return;
mutex_lock(&obj->iommu_lock);
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
"for McBSP%d\n", mcbsp->tx_irq,
mcbsp->id);
- return err;
+ goto error;
}
init_completion(&mcbsp->rx_irq_completion);
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
"for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- return err;
+ goto tx_irq;
}
}
return 0;
+tx_irq:
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
+error:
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+ mcbsp->pdata->ops->free(id);
+
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_free(mcbsp);
+
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+
+ mcbsp->free = 1;
+
+ return err;
}
EXPORT_SYMBOL(omap_mcbsp_request);
size += cs->size;
}
+ /*
+ * Round up 'size' to the nearest power of two.
+ */
+ if ((size & (size - 1)) != 0)
+ size = 1 << fls(size);
+
/*
* Setup BAR[1] to all DRAM banks.
*/
goto err_free_clk;
}
- r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
if (r == NULL) {
dev_err(&pdev->dev, "failed to request memory resource\n");
ret = -EBUSY;
goto err_free_clk;
}
- pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ pwm->mmio_base = ioremap(r->start, resource_size(r));
if (pwm->mmio_base == NULL) {
dev_err(&pdev->dev, "failed to ioremap() registers\n");
ret = -ENODEV;
return 0;
err_free_mem:
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
err_free_clk:
clk_put(pwm->clk);
err_free:
iounmap(pwm->mmio_base);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
clk_put(pwm->clk);
kfree(pwm);
return -ENOMEM;
}
- size = sizeof(int) * set->nr_chips;
- if (size) {
+ if (set->nr_map && set->nr_chips) {
+ size = sizeof(int) * set->nr_chips;
ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
set->nr_map = ptr;
for (i = 0; i < npd->nr_sets; i++) {
ret = s3c_nand_copy_set(to);
- if (!ret) {
+ if (ret) {
printk(KERN_ERR "%s: failed to copy set %d\n",
__func__, i);
return;
to++;
}
}
+
+ s3c_device_nand.dev.platform_data = npd;
}
EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_fb;
extern struct platform_device s3c_device_usb;
extern struct platform_device s3c_device_lcd;
#include <plat/cpu.h>
#include <plat/regs-spi.h>
+#include <mach/ts.h>
+
/* Serial port registrations */
static struct resource s3c2410_uart0_resource[] = {
}
}
+/* Touchscreen */
+struct platform_device s3c_device_ts = {
+ .name = "s3c2410-ts",
+ .id = -1,
+};
+EXPORT_SYMBOL(s3c_device_ts);
+
+static struct s3c2410_ts_mach_info s3c2410ts_info;
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+ memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info));
+ s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
+
/* USB Device (Gadget)*/
static struct resource s3c_usbgadget_resource[] = {
s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c0.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
+ s3c_device_ts.name = "s3c2440-ts";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
}
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fout_mpll clk_mpll
+#define clk_fout_epll clk_epll
struct clk_sources {
unsigned int nr_sources;
.sources = &clk_src_apll,
};
-static struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
-};
-
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,
[1] = &clk_fout_epll,
&clk_iis_cd1,
&clk_pcm_cd,
&clk_mout_epll.clk,
- &clk_fout_epll,
&clk_mout_mpll.clk,
&clk_dout_mpll,
&clk_mmc0.clk,
clkp->name, ret);
}
}
-
- clk_mpll.parent = &clk_mout_mpll.clk;
- clk_epll.parent = &clk_mout_epll.clk;
}
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Wed Dec 16 20:06:34 2009
+# Last update: Thu Jan 28 22:15:54 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
c3ax03 MACH_C3AX03 C3AX03 2549
mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
esyx MACH_ESYX ESYX 2551
+dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552
bulldog MACH_BULLDOG BULLDOG 2553
derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554
bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555
cezanne MACH_CEZANNE CEZANNE 2569
lucca MACH_LUCCA LUCCA 2570
supersmart MACH_SUPERSMART SUPERSMART 2571
+arm11_board MACH_CS_MISANO CS_MISANO 2572
magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573
emxx MACH_EMXX EMXX 2574
outlaw MACH_OUTLAW OUTLAW 2575
phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593
omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594
pca101 MACH_PCA101 PCA101 2595
+buzzc MACH_BUZZC BUZZC 2596
+sasie2 MACH_SASIE2 SASIE2 2597
+davinci_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598
+smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599
+wzl6410 MACH_WZL6410 WZL6410 2600
+wzl6410m MACH_WZL6410M WZL6410M 2601
+wzl6410f MACH_WZL6410F WZL6410F 2602
+wzl6410i MACH_WZL6410I WZL6410I 2603
+spacecom1 MACH_SPACECOM1 SPACECOM1 2604
+pingu920 MACH_PINGU920 PINGU920 2605
+bravoc MACH_BRAVOC BRAVOC 2606
+cybo2440 MACH_CYBO2440 CYBO2440 2607
+vdssw MACH_VDSSW VDSSW 2608
+romulus MACH_ROMULUS ROMULUS 2609
+omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610
+eltd100 MACH_ELTD100 ELTD100 2611
+capc7117 MACH_CAPC7117 CAPC7117 2612
+swan MACH_SWAN SWAN 2613
+veu MACH_VEU VEU 2614
+rm2 MACH_RM2 RM2 2615
+tt2100 MACH_TT2100 TT2100 2616
+venice MACH_VENICE VENICE 2617
+pc7323 MACH_PC7323 PC7323 2618
+masp MACH_MASP MASP 2619
+fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620
+fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621
+lexikon MACH_LEXIKON LEXIKON 2622
+mini2440v2 MACH_MINI2440V2 MINI2440V2 2623
+icontrol MACH_ICONTROL ICONTROL 2624
+sheevad MACH_SHEEVAD SHEEVAD 2625
+qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626
+qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627
+bee MACH_BEE BEE 2628
+mx23evk MACH_MX23EVK MX23EVK 2629
+ap4evb MACH_AP4EVB AP4EVB 2630
+stockholm MACH_STOCKHOLM STOCKHOLM 2631
+lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632
+stingray MACH_STINGRAY STINGRAY 2633
+kraken MACH_KRAKEN KRAKEN 2634
+gw2388 MACH_GW2388 GW2388 2635
+jadecpu MACH_JADECPU JADECPU 2636
+carlisle MACH_CARLISLE CARLISLE 2637
+lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638
+nemid_tb MACH_NEMID_TB NEMID_TB 2639
+terrier MACH_TERRIER TERRIER 2640
+turbot MACH_TURBOT TURBOT 2641
+sanddab MACH_SANDDAB SANDDAB 2642
+mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643
+ghi2703d MACH_GHI2703D GHI2703D 2644
+lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645
+lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646
+lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647
+hw90240 MACH_HW90240 HW90240 2648
+dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
+mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
+scat110 MACH_SCAT110 SCAT110 2651
}
/*
- * Update the FPSCR with the additional exception flags.
+ * If any of the status flags are set, update the FPSCR.
* Comparison instructions always return at least one of
* these flags set.
*/
+ if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+ fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
fpscr |= exceptions;
fmxr(FPSCR, fpscr);
#include <asm-generic/page.h>
#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
#endif
* Licensed under the GPL-2 or later.
*/
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
#include <linux/ptrace.h> /* for linux pt_regs struct */
#include <linux/kgdb.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/blackfin.h>
-#include <asm/dma.h>
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
regs->lb1 = gdb_regs[BFIN_LB1];
regs->usp = gdb_regs[BFIN_USP];
regs->syscfg = gdb_regs[BFIN_SYSCFG];
- regs->retx = gdb_regs[BFIN_PC];
+ regs->retx = gdb_regs[BFIN_RETX];
regs->retn = gdb_regs[BFIN_RETN];
regs->rete = gdb_regs[BFIN_RETE];
regs->pc = gdb_regs[BFIN_PC];
.correct_hw_break = bfin_correct_hw_break,
};
-static int hex(char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return ch - 'a' + 10;
- if ((ch >= '0') && (ch <= '9'))
- return ch - '0';
- if ((ch >= 'A') && (ch <= 'F'))
- return ch - 'A' + 10;
- return -1;
-}
-
-static int validate_memory_access_address(unsigned long addr, int size)
-{
- if (size < 0 || addr == 0)
- return -EFAULT;
- return bfin_mem_access_type(addr, size);
-}
-
-static int bfin_probe_kernel_read(char *dst, char *src, int size)
-{
- unsigned long lsrc = (unsigned long)src;
- int mem_type;
-
- mem_type = validate_memory_access_address(lsrc, size);
- if (mem_type < 0)
- return mem_type;
-
- if (lsrc >= SYSMMR_BASE) {
- if (size == 2 && lsrc % 2 == 0) {
- u16 mmr = bfin_read16(src);
- memcpy(dst, &mmr, sizeof(mmr));
- return 0;
- } else if (size == 4 && lsrc % 4 == 0) {
- u32 mmr = bfin_read32(src);
- memcpy(dst, &mmr, sizeof(mmr));
- return 0;
- }
- } else {
- switch (mem_type) {
- case BFIN_MEM_ACCESS_CORE:
- case BFIN_MEM_ACCESS_CORE_ONLY:
- return probe_kernel_read(dst, src, size);
- /* XXX: should support IDMA here with SMP */
- case BFIN_MEM_ACCESS_DMA:
- if (dma_memcpy(dst, src, size))
- return 0;
- break;
- case BFIN_MEM_ACCESS_ITEST:
- if (isram_memcpy(dst, src, size))
- return 0;
- break;
- }
- }
-
- return -EFAULT;
-}
-
-static int bfin_probe_kernel_write(char *dst, char *src, int size)
-{
- unsigned long ldst = (unsigned long)dst;
- int mem_type;
-
- mem_type = validate_memory_access_address(ldst, size);
- if (mem_type < 0)
- return mem_type;
-
- if (ldst >= SYSMMR_BASE) {
- if (size == 2 && ldst % 2 == 0) {
- u16 mmr;
- memcpy(&mmr, src, sizeof(mmr));
- bfin_write16(dst, mmr);
- return 0;
- } else if (size == 4 && ldst % 4 == 0) {
- u32 mmr;
- memcpy(&mmr, src, sizeof(mmr));
- bfin_write32(dst, mmr);
- return 0;
- }
- } else {
- switch (mem_type) {
- case BFIN_MEM_ACCESS_CORE:
- case BFIN_MEM_ACCESS_CORE_ONLY:
- return probe_kernel_write(dst, src, size);
- /* XXX: should support IDMA here with SMP */
- case BFIN_MEM_ACCESS_DMA:
- if (dma_memcpy(dst, src, size))
- return 0;
- break;
- case BFIN_MEM_ACCESS_ITEST:
- if (isram_memcpy(dst, src, size))
- return 0;
- break;
- }
- }
-
- return -EFAULT;
-}
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null). May return an error.
- */
-int kgdb_mem2hex(char *mem, char *buf, int count)
-{
- char *tmp;
- int err;
-
- /*
- * We use the upper half of buf as an intermediate buffer for the
- * raw memory copy. Hex conversion will work against this one.
- */
- tmp = buf + count;
-
- err = bfin_probe_kernel_read(tmp, mem, count);
- if (!err) {
- while (count > 0) {
- buf = pack_hex_byte(buf, *tmp);
- tmp++;
- count--;
- }
-
- *buf = 0;
- }
-
- return err;
-}
-
-/*
- * Copy the binary array pointed to by buf into mem. Fix $, #, and
- * 0x7d escaped with 0x7d. Return a pointer to the character after
- * the last byte written.
- */
-int kgdb_ebin2mem(char *buf, char *mem, int count)
-{
- char *tmp_old, *tmp_new;
- int size;
-
- tmp_old = tmp_new = buf;
-
- for (size = 0; size < count; ++size) {
- if (*tmp_old == 0x7d)
- *tmp_new = *(++tmp_old) ^ 0x20;
- else
- *tmp_new = *tmp_old;
- tmp_new++;
- tmp_old++;
- }
-
- return bfin_probe_kernel_write(mem, buf, count);
-}
-
-/*
- * Convert the hex array pointed to by buf into binary to be placed in mem.
- * Return a pointer to the character AFTER the last byte written.
- * May return an error.
- */
-int kgdb_hex2mem(char *buf, char *mem, int count)
-{
- char *tmp_raw, *tmp_hex;
-
- /*
- * We use the upper half of buf as an intermediate buffer for the
- * raw memory that is converted from hex.
- */
- tmp_raw = buf + count * 2;
-
- tmp_hex = tmp_raw - 1;
- while (tmp_hex >= buf) {
- tmp_raw--;
- *tmp_raw = hex(*tmp_hex--);
- *tmp_raw |= hex(*tmp_hex--) << 4;
- }
-
- return bfin_probe_kernel_write(mem, tmp_raw, count);
-}
-
#define IN_MEM(addr, size, l1_addr, l1_size) \
({ \
unsigned long __addr = (unsigned long)(addr); \
return -EFAULT;
}
-int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
-{
- int err = bfin_probe_kernel_read(saved_instr, (char *)addr,
- BREAK_INSTR_SIZE);
- if (err)
- return err;
- return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
- BREAK_INSTR_SIZE);
-}
-
-int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
-{
- return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE);
-}
-
int kgdb_arch_init(void)
{
kgdb_single_step = 0;
# arch/blackfin/mm/Makefile
#
-obj-y := sram-alloc.o isram-driver.o init.o
+obj-y := sram-alloc.o isram-driver.o init.o maccess.o
--- /dev/null
+/*
+ * safe read and write memory routines callable while atomic
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/uaccess.h>
+#include <asm/dma.h>
+
+static int validate_memory_access_address(unsigned long addr, int size)
+{
+ if (size < 0 || addr == 0)
+ return -EFAULT;
+ return bfin_mem_access_type(addr, size);
+}
+
+long probe_kernel_read(void *dst, void *src, size_t size)
+{
+ unsigned long lsrc = (unsigned long)src;
+ int mem_type;
+
+ mem_type = validate_memory_access_address(lsrc, size);
+ if (mem_type < 0)
+ return mem_type;
+
+ if (lsrc >= SYSMMR_BASE) {
+ if (size == 2 && lsrc % 2 == 0) {
+ u16 mmr = bfin_read16(src);
+ memcpy(dst, &mmr, sizeof(mmr));
+ return 0;
+ } else if (size == 4 && lsrc % 4 == 0) {
+ u32 mmr = bfin_read32(src);
+ memcpy(dst, &mmr, sizeof(mmr));
+ return 0;
+ }
+ } else {
+ switch (mem_type) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ return __probe_kernel_read(dst, src, size);
+ /* XXX: should support IDMA here with SMP */
+ case BFIN_MEM_ACCESS_DMA:
+ if (dma_memcpy(dst, src, size))
+ return 0;
+ break;
+ case BFIN_MEM_ACCESS_ITEST:
+ if (isram_memcpy(dst, src, size))
+ return 0;
+ break;
+ }
+ }
+
+ return -EFAULT;
+}
+
+long probe_kernel_write(void *dst, void *src, size_t size)
+{
+ unsigned long ldst = (unsigned long)dst;
+ int mem_type;
+
+ mem_type = validate_memory_access_address(ldst, size);
+ if (mem_type < 0)
+ return mem_type;
+
+ if (ldst >= SYSMMR_BASE) {
+ if (size == 2 && ldst % 2 == 0) {
+ u16 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write16(dst, mmr);
+ return 0;
+ } else if (size == 4 && ldst % 4 == 0) {
+ u32 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write32(dst, mmr);
+ return 0;
+ }
+ } else {
+ switch (mem_type) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ return __probe_kernel_write(dst, src, size);
+ /* XXX: should support IDMA here with SMP */
+ case BFIN_MEM_ACCESS_DMA:
+ if (dma_memcpy(dst, src, size))
+ return 0;
+ break;
+ case BFIN_MEM_ACCESS_ITEST:
+ if (isram_memcpy(dst, src, size))
+ return 0;
+ break;
+ }
+ }
+
+ return -EFAULT;
+}
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_MMU
#define VM_DATA_DEFAULT_FLAGS \
(VM_READ | VM_WRITE | \
((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#endif
#endif /* __ASSEMBLY__ */
extern void _mcount(unsigned long pfs, unsigned long r1, unsigned long b0, unsigned long r0);
#define mcount _mcount
-#include <asm/kprobes.h>
/* In IA64, MCOUNT_ADDR is set in link time, so it's not a constant at compile time */
#define MCOUNT_ADDR (((struct fnptr *)mcount)->ip)
#define FTRACE_ADDR (((struct fnptr *)ftrace_caller)->ip)
bundle_t bundle;
} kprobe_opcode_t;
-struct fnptr {
- unsigned long ip;
- unsigned long gp;
-};
-
/* Architecture specific copy of original instruction*/
struct arch_specific_insn {
/* copy of the instruction to be emulated */
extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size);
extern void ia64_ptr_entry(u64 target_mask, int slot);
-extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS];
/*
region register macros
/*
* Returns a bitmask of CPUs on Node 'node'.
*/
-#define cpumask_of_node(node) (&node_to_cpu_mask[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &node_to_cpu_mask[node])
/*
* Returns the number of the node containing Node 'nid'.
*/
# ifdef __KERNEL__
+struct fnptr {
+ unsigned long ip;
+ unsigned long gp;
+};
+
/* DMA addresses are 64-bits wide, in general. */
typedef u64 dma_addr_t;
unsigned long psr;
int cpu = smp_processor_id();
+ if (!ia64_idtrs[cpu])
+ return;
+
psr = ia64_clear_ic();
for (i = IA64_TR_ALLOC_BASE; i < IA64_TR_ALLOC_MAX; i++) {
- p = &__per_cpu_idtrs[cpu][iord-1][i];
+ p = ia64_idtrs[cpu] + (iord - 1) * IA64_TR_ALLOC_MAX;
if (p->pte & 0x1) {
old_rr = ia64_get_rr(p->ifa);
if (old_rr != p->rr) {
* if ((mm->total_vm << PAGE_SHIFT) + len> task->rlim[RLIMIT_AS].rlim_cur)
* return -ENOMEM;
*/
- if (size > task->signal->rlim[RLIMIT_MEMLOCK].rlim_cur)
+ if (size > task_rlimit(task, RLIMIT_MEMLOCK))
return -ENOMEM;
/*
#define _vmm_raw_spin_lock(x) do {}while(0)
#define _vmm_raw_spin_unlock(x) do {}while(0)
#else
+typedef struct {
+ volatile unsigned int lock;
+} vmm_spinlock_t;
#define _vmm_raw_spin_lock(x) \
do { \
__u32 *ia64_spinlock_ptr = (__u32 *) (x); \
#define _vmm_raw_spin_unlock(x) \
do { barrier(); \
- ((spinlock_t *)x)->raw_lock.lock = 0; } \
+ ((vmm_spinlock_t *)x)->lock = 0; } \
while (0)
#endif
-void vmm_spin_lock(spinlock_t *lock);
-void vmm_spin_unlock(spinlock_t *lock);
+void vmm_spin_lock(vmm_spinlock_t *lock);
+void vmm_spin_unlock(vmm_spinlock_t *lock);
enum {
I_TLB = 1,
D_TLB = 2
return ;
}
-void vmm_spin_lock(spinlock_t *lock)
+void vmm_spin_lock(vmm_spinlock_t *lock)
{
_vmm_raw_spin_lock(lock);
}
-void vmm_spin_unlock(spinlock_t *lock)
+void vmm_spin_unlock(vmm_spinlock_t *lock)
{
_vmm_raw_spin_unlock(lock);
}
{
u64 i, dirty_pages = 1;
u64 base_gfn = (pte&_PAGE_PPN_MASK) >> PAGE_SHIFT;
- spinlock_t *lock = __kvm_va(v->arch.dirty_log_lock_pa);
+ vmm_spinlock_t *lock = __kvm_va(v->arch.dirty_log_lock_pa);
void *dirty_bitmap = (void *)KVM_MEM_DIRTY_LOG_BASE;
dirty_pages <<= ps <= PAGE_SHIFT ? 0 : ps - PAGE_SHIFT;
inline void
ia64_set_rbs_bot (void)
{
- unsigned long stack_size = current->signal->rlim[RLIMIT_STACK].rlim_max & -16;
+ unsigned long stack_size = rlimit_max(RLIMIT_STACK) & -16;
if (stack_size > MAX_USER_STACK_SIZE)
stack_size = MAX_USER_STACK_SIZE;
DEFINE_PER_CPU(u8, ia64_tr_num); /*Number of TR slots in current processor*/
DEFINE_PER_CPU(u8, ia64_tr_used); /*Max Slot number used by kernel*/
-struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+struct ia64_tr_entry *ia64_idtrs[NR_CPUS];
/*
* Initializes the ia64_ctx.bitmap array based on max_ctx+1.
struct ia64_tr_entry *p;
int cpu = smp_processor_id();
+ if (!ia64_idtrs[cpu]) {
+ ia64_idtrs[cpu] = kmalloc(2 * IA64_TR_ALLOC_MAX *
+ sizeof (struct ia64_tr_entry), GFP_KERNEL);
+ if (!ia64_idtrs[cpu])
+ return -ENOMEM;
+ }
r = -EINVAL;
/*Check overlap with existing TR entries*/
if (target_mask & 0x1) {
- p = &__per_cpu_idtrs[cpu][0][0];
+ p = ia64_idtrs[cpu];
for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
i++, p++) {
if (p->pte & 0x1)
}
}
if (target_mask & 0x2) {
- p = &__per_cpu_idtrs[cpu][1][0];
+ p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX;
for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
i++, p++) {
if (p->pte & 0x1)
for (i = IA64_TR_ALLOC_BASE; i < per_cpu(ia64_tr_num, cpu); i++) {
switch (target_mask & 0x3) {
case 1:
- if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1))
+ if (!((ia64_idtrs[cpu] + i)->pte & 0x1))
goto found;
continue;
case 2:
- if (!(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ if (!((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1))
goto found;
continue;
case 3:
- if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1) &&
- !(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ if (!((ia64_idtrs[cpu] + i)->pte & 0x1) &&
+ !((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1))
goto found;
continue;
default:
if (target_mask & 0x1) {
ia64_itr(0x1, i, va, pte, log_size);
ia64_srlz_i();
- p = &__per_cpu_idtrs[cpu][0][i];
+ p = ia64_idtrs[cpu] + i;
p->ifa = va;
p->pte = pte;
p->itir = log_size << 2;
if (target_mask & 0x2) {
ia64_itr(0x2, i, va, pte, log_size);
ia64_srlz_i();
- p = &__per_cpu_idtrs[cpu][1][i];
+ p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i;
p->ifa = va;
p->pte = pte;
p->itir = log_size << 2;
return;
if (target_mask & 0x1) {
- p = &__per_cpu_idtrs[cpu][0][slot];
+ p = ia64_idtrs[cpu] + slot;
if ((p->pte&0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
p->pte = 0;
ia64_ptr(0x1, p->ifa, p->itir>>2);
}
if (target_mask & 0x2) {
- p = &__per_cpu_idtrs[cpu][1][slot];
+ p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + slot;
if ((p->pte & 0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
p->pte = 0;
ia64_ptr(0x2, p->ifa, p->itir>>2);
}
for (i = per_cpu(ia64_tr_used, cpu); i >= IA64_TR_ALLOC_BASE; i--) {
- if ((__per_cpu_idtrs[cpu][0][i].pte & 0x1) ||
- (__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ if (((ia64_idtrs[cpu] + i)->pte & 0x1) ||
+ ((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1))
break;
}
per_cpu(ia64_tr_used, cpu) = i;
#ifdef __KERNEL__
+#include <asm/virtconvert.h>
/*
* These are for ISA/PCI shared memory _only_ and should never be used
extern void iounmap(void *addr);
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
#ifndef __ASSEMBLY__
-#define __pa(vaddr) virt_to_phys((void *)(vaddr))
-#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+#define __pa(vaddr) ((unsigned long)(vaddr))
+#define __va(paddr) ((void *)(paddr))
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
}
/* Permanent address of a page. */
+#ifdef CONFIG_MMU
#ifdef CONFIG_SINGLE_MEMORY_CHUNK
#define page_to_phys(page) \
__pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
page_to_pfn(__page) << PAGE_SHIFT; \
})
#endif
+#else
+#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
+#endif
/*
* IO bus memory addresses are 1:1 with the physical address,
.read = pit_read_clk,
.shift = 20,
.mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/***************************************************************************/
menu "Processor type and features"
-source kernel/time/Kconfig
+source "kernel/time/Kconfig"
source "kernel/Kconfig.preempt"
int pt_mode;
};
+#ifdef __KERNEL__
#define kernel_mode(regs) ((regs)->pt_mode)
#define user_mode(regs) (!kernel_mode(regs))
void show_regs(struct pt_regs *);
+#else /* __KERNEL__ */
+
+/* pt_regs offsets used by gdbserver etc in ptrace syscalls */
+#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t))
+#define PT_PC (32 * sizeof(microblaze_reg_t))
+#define PT_MSR (33 * sizeof(microblaze_reg_t))
+#define PT_EAR (34 * sizeof(microblaze_reg_t))
+#define PT_ESR (35 * sizeof(microblaze_reg_t))
+#define PT_FSR (36 * sizeof(microblaze_reg_t))
+#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t))
+
+#endif /* __KERNEL */
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_PTRACE_H */
#define __NR_shutdown 359 /* new */
#define __NR_sendmsg 360 /* new */
#define __NR_recvmsg 361 /* new */
-#define __NR_accept04 362 /* new */
+#define __NR_accept4 362 /* new */
#define __NR_preadv 363 /* new */
#define __NR_pwritev 364 /* new */
#define __NR_rt_tgsigqueueinfo 365 /* new */
#define __NR_perf_event_open 366 /* new */
+#define __NR_recvmmsg 367 /* new */
-#define __NR_syscalls 367
+#define __NR_syscalls 368
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
if (ppdev == NULL) {
struct pci_controller *host;
host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->arch_data : NULL;
+ ppnode = host ? host->dn : NULL;
/* No node for host bridge ? give up */
if (ppnode == NULL)
return -EINVAL;
.long sys_shutdown
.long sys_sendmsg /* 360 */
.long sys_recvmsg
- .long sys_ni_syscall
+ .long sys_accept4
.long sys_ni_syscall
.long sys_ni_syscall
.long sys_rt_tgsigqueueinfo /* 365 */
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
config SYS_SUPPORTS_ZBOOT_UART16550
bool
dma_cache_wback_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
- dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer. */
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
- dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer. */
if (strstr(prom_getcmdline(), "console="))
return;
-#ifdef CONFIG_KGDB
- if (!strstr(prom_getcmdline(), "nokgdb")) {
- strcat(prom_getcmdline(), " console=kgdb");
- kgdb_enabled = 1;
- return;
- }
-#endif
-
s = prom_getenv("modetty0");
if (s) {
baud = simple_strtoul(s, &p, 10);
writel(value, (void *)PORT(offset));
}
-char prom_getchar(void)
-{
- while (!(serial_in(UART_LSR) & UART_LSR_DR))
- ;
- return serial_in(UART_RX);
-}
-
int prom_putchar(char c)
{
while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
};
static struct board_info __initdata board_FAST2404 = {
- .name = "F@ST2404",
- .expected_cpu_id = 0x6348,
-
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .name = "F@ST2404",
+ .expected_cpu_id = 0x6348,
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
};
static struct board_info __initdata board_DV201AMR = {
reg &= ~mask;
bcm_perf_writel(reg, PERF_CKCTL_REG);
- /* assign command line from kernel config */
- strcpy(arcs_cmdline, CONFIG_CMDLINE);
-
/* register gpiochip */
bcm63xx_gpio_init();
mkboot
elf2ecoff
+vmlinux.*
zImage
zImage.tmp
all: vmlinux.ecoff vmlinux.srec
vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
- $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
+ $(obj)/elf2ecoff $(VMLINUX) $(obj)/vmlinux.ecoff $(E2EFLAGS)
$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
$(HOSTCC) -o $@ $^
# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
-VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
-VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE))))
+VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
+# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE"
+HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10)))
+LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8)
+VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32))))
# set the default size of the mallocing area for decompressing
BOOT_HEAP_SIZE := 0x400000
suffix_$(CONFIG_KERNEL_GZIP) = gz
suffix_$(CONFIG_KERNEL_BZIP2) = bz2
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix_$(CONFIG_KERNEL_LZO) = lzo
tool_$(CONFIG_KERNEL_GZIP) = gzip
tool_$(CONFIG_KERNEL_BZIP2) = bzip2
tool_$(CONFIG_KERNEL_LZMA) = lzma
+tool_$(CONFIG_KERNEL_LZO) = lzo
$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
$(call if_changed,$(tool_y))
LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
$(call if_changed,ld)
- $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+ $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@
#
# Some DECstations need all possible sections of an ECOFF executable
$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
$(Q)$(HOSTCC) -o $@ $^
-drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-strip-flags = $(addprefix --remove-section=,$(drop-sections))
-
-OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
vmlinuz.bin: vmlinuz
$(call if_changed,objcopy)
-OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
vmlinuz.srec: vmlinuz
$(call if_changed,objcopy)
/* The linker tells us where the image is. */
extern unsigned char __image_begin, __image_end;
-extern unsigned char __ramdisk_begin, __ramdisk_end;
-unsigned long initrd_size;
/* debug interfaces */
extern void puts(const char *s);
#include "../../../../lib/decompress_unlzma.c"
#endif
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
void decompress_kernel(unsigned long boot_heap_start)
{
int zimage_size;
puthex((unsigned long)(zimage_size + zimage_start));
puts("\n");
- if (initrd_size) {
- puts("initrd at: ");
- puthex((unsigned long)(&__ramdisk_begin));
- puts(" ");
- puthex((unsigned long)(&__ramdisk_end));
- puts("\n");
- }
-
/* this area are prepared for mallocing when decompressing */
free_mem_ptr = boot_heap_start;
free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
+/*
+ * ld.script for compressed kernel support of MIPS
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
OUTPUT_ARCH(mips)
ENTRY(start)
SECTIONS
{
- /* Read-only sections, merged into text segment: */
- .init : { *(.init) } =0
- .text :
- {
- _ftext = . ;
- *(.text)
- *(.rodata)
- *(.rodata1)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0
- .kstrtab : { *(.kstrtab) }
-
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- __start___dbe_table = .; /* Exception table for data bus errors */
- __dbe_table : { *(__dbe_table) }
- __stop___dbe_table = .;
-
- __start___ksymtab = .; /* Kernel symbol table */
- __ksymtab : { *(__ksymtab) }
- __stop___ksymtab = .;
-
- _etext = .;
-
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-
- /* Startup code */
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(16);
- __setup_start = .;
- .setup.init : { *(.setup.init) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : { *(.initcall.init) }
- __initcall_end = .;
- . = ALIGN(4096); /* Align double page for init_task_union */
- __init_end = .;
-
- . = ALIGN(4096);
- .data.page_aligned : { *(.data.idt) }
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ /* . = VMLINUZ_LOAD_ADDRESS */
+ /* read-only */
+ _text = .; /* Text and read-only data */
+ .text : {
+ _ftext = . ;
+ *(.text)
+ *(.rodata)
+ } = 0
+ _etext = .; /* End of text section */
- .fini : { *(.fini) } =0
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. It would
- be more correct to do this:
- . = .;
- The current expression does not correctly handle the case of a
- text segment ending precisely at the end of a page; it causes the
- data segment to skip a page. The above expression does not have
- this problem, but it will currently (2/95) cause BFD to allocate
- a single segment, combining both text and data, for this case.
- This will prevent the text segment from being shared among
- multiple executions of the program; I think that is more
- important than losing a page of the virtual address space (note
- that no actual memory is lost; the page which is skipped can not
- be referenced). */
- . = .;
- .data :
- {
- _fdata = . ;
- *(.data)
+ /* writable */
+ .data : { /* Data */
+ _fdata = . ;
+ *(.data)
+ /* Put the compressed image here, so bss is on the end. */
+ __image_begin = .;
+ *(.image)
+ __image_end = .;
+ CONSTRUCTORS
+ }
+ .sdata : { *(.sdata) }
+ . = ALIGN(4);
+ _edata = .; /* End of data section */
- /* Put the compressed image here, so bss is on the end. */
- __image_begin = .;
- *(.image)
- __image_end = .;
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(4096);
- __ramdisk_begin = .;
- *(.initrd)
- __ramdisk_end = .;
- . = ALIGN(4096);
+ /* BSS */
+ __bss_start = .;
+ _fbss = .;
+ .sbss : { *(.sbss) *(.scommon) }
+ .bss : {
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ . = ALIGN(4);
+ _end = . ;
- CONSTRUCTORS
- }
- .data1 : { *(.data1) }
- _gp = . + 0x8000;
- .lit8 : { *(.lit8) }
- .lit4 : { *(.lit4) }
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- . = ALIGN(4);
- _edata = .;
- PROVIDE (edata = .);
+ /* These are needed for ELF backends which have not yet been converted
+ * to the new style linker. */
- __bss_start = .;
- _fbss = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
- }
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
- /* Sections to be discarded */
- /DISCARD/ :
- {
- *(.text.exit)
- *(.data.exit)
- *(.exitcall.exit)
- }
+ /* These must appear regardless of . */
+ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- /* This is the MIPS specific mdebug section. */
- .mdebug : { *(.mdebug) }
- /* These are needed for ELF backends which have not yet been
- converted to the new style linker. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- /* DWARF debug sections.
- Symbols in the .debug DWARF section are relative to the beginning of the
- section so we begin .debug at 0. It's not clear yet what needs to happen
- for the others. */
- .debug 0 : { *(.debug) }
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- .line 0 : { *(.line) }
- /* These must appear regardless of . */
- .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
- .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- .comment : { *(.comment) }
- .note : { *(.note) }
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.MIPS.options)
+ *(.options)
+ *(.pdr)
+ *(.reginfo)
+ *(.comment)
+ *(.note)
+ }
}
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+unsigned long long notrace sched_clock(void)
+{
+ /* 64-bit arithmatic can overflow, so use 128-bit. */
+#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3))
+ u64 t1, t2, t3;
+ unsigned long long rv;
+ u64 mult = clocksource_mips.mult;
+ u64 shift = clocksource_mips.shift;
+ u64 cnt = read_c0_cvmcount();
+
+ asm (
+ "dmultu\t%[cnt],%[mult]\n\t"
+ "nor\t%[t1],$0,%[shift]\n\t"
+ "mfhi\t%[t2]\n\t"
+ "mflo\t%[t3]\n\t"
+ "dsll\t%[t2],%[t2],1\n\t"
+ "dsrlv\t%[rv],%[t3],%[shift]\n\t"
+ "dsllv\t%[t1],%[t2],%[t1]\n\t"
+ "or\t%[rv],%[t1],%[rv]\n\t"
+ : [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3)
+ : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
+ : "hi", "lo");
+ return rv;
+#else
+ /* GCC > 4.3 do it the easy way. */
+ unsigned int __attribute__((mode(TI))) t;
+ t = read_c0_cvmcount();
+ t = t * clocksource_mips.mult;
+ return (unsigned long long)(t >> clocksource_mips.shift);
+#endif
+}
+
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
void __init prom_init(void)
{
- int narg, indx, posn, nchr;
unsigned long memsz;
+ int argc, i;
char **argv;
memsz = fw_arg0 & 0x7fff0000;
- narg = fw_arg0 & 0x0000ffff;
-
- if (narg) {
- arcs_cmdline[0] = '\0';
- argv = (char **) fw_arg1;
- posn = 0;
- for (indx = 1; indx < narg; ++indx) {
- nchr = strlen(argv[indx]);
- if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
- break;
- if (posn)
- arcs_cmdline[posn++] = ' ';
- strcpy(arcs_cmdline + posn, argv[indx]);
- posn += nchr;
- }
+ argc = fw_arg0 & 0x0000ffff;
+ argv = (char **)fw_arg1;
+
+ for (i = 1; i < argc; i++) {
+ strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+ if (i < (argc - 1))
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
add_memory_region(0x0, memsz, BOOT_MEM_RAM);
#define CP0_LEGACY_COMPARE_IRQ 7
extern int cp0_compare_irq;
+extern int cp0_compare_irq_shift;
extern int cp0_perfcount_irq;
#endif /* _ASM_IRQ_H */
#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid)
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&hub_data(node)->h_cpus)
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &hub_data(node)->h_cpus)
struct pci_bus;
extern int pcibus_to_node(struct pci_bus *);
--- /dev/null
+/*
+ * asic_reg_map.h
+ *
+ * A macro-enclosed list of the elements for the register_map structure for
+ * use in defining and manipulating the structure.
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
+REGISTER_MAP_ELEMENT(eic_cfg_bits)
+REGISTER_MAP_ELEMENT(eic_ready_status)
+REGISTER_MAP_ELEMENT(chipver3)
+REGISTER_MAP_ELEMENT(chipver2)
+REGISTER_MAP_ELEMENT(chipver1)
+REGISTER_MAP_ELEMENT(chipver0)
+REGISTER_MAP_ELEMENT(uart1_intstat)
+REGISTER_MAP_ELEMENT(uart1_inten)
+REGISTER_MAP_ELEMENT(uart1_config1)
+REGISTER_MAP_ELEMENT(uart1_config2)
+REGISTER_MAP_ELEMENT(uart1_divisorhi)
+REGISTER_MAP_ELEMENT(uart1_divisorlo)
+REGISTER_MAP_ELEMENT(uart1_data)
+REGISTER_MAP_ELEMENT(uart1_status)
+REGISTER_MAP_ELEMENT(int_stat_3)
+REGISTER_MAP_ELEMENT(int_stat_2)
+REGISTER_MAP_ELEMENT(int_stat_1)
+REGISTER_MAP_ELEMENT(int_stat_0)
+REGISTER_MAP_ELEMENT(int_config)
+REGISTER_MAP_ELEMENT(int_int_scan)
+REGISTER_MAP_ELEMENT(ien_int_3)
+REGISTER_MAP_ELEMENT(ien_int_2)
+REGISTER_MAP_ELEMENT(ien_int_1)
+REGISTER_MAP_ELEMENT(ien_int_0)
+REGISTER_MAP_ELEMENT(int_level_3_3)
+REGISTER_MAP_ELEMENT(int_level_3_2)
+REGISTER_MAP_ELEMENT(int_level_3_1)
+REGISTER_MAP_ELEMENT(int_level_3_0)
+REGISTER_MAP_ELEMENT(int_level_2_3)
+REGISTER_MAP_ELEMENT(int_level_2_2)
+REGISTER_MAP_ELEMENT(int_level_2_1)
+REGISTER_MAP_ELEMENT(int_level_2_0)
+REGISTER_MAP_ELEMENT(int_level_1_3)
+REGISTER_MAP_ELEMENT(int_level_1_2)
+REGISTER_MAP_ELEMENT(int_level_1_1)
+REGISTER_MAP_ELEMENT(int_level_1_0)
+REGISTER_MAP_ELEMENT(int_level_0_3)
+REGISTER_MAP_ELEMENT(int_level_0_2)
+REGISTER_MAP_ELEMENT(int_level_0_1)
+REGISTER_MAP_ELEMENT(int_level_0_0)
+REGISTER_MAP_ELEMENT(int_docsis_en)
+REGISTER_MAP_ELEMENT(mips_pll_setup)
+REGISTER_MAP_ELEMENT(usb_fs)
+REGISTER_MAP_ELEMENT(test_bus)
+REGISTER_MAP_ELEMENT(crt_spare)
+REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
+REGISTER_MAP_ELEMENT(usb2_strap)
+REGISTER_MAP_ELEMENT(ehci_hcapbase)
+REGISTER_MAP_ELEMENT(ohci_hc_revision)
+REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
+REGISTER_MAP_ELEMENT(usb2_control)
+REGISTER_MAP_ELEMENT(usb2_stbus_obc)
+REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
+REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
+REGISTER_MAP_ELEMENT(pcie_regs)
+REGISTER_MAP_ELEMENT(tim_ch)
+REGISTER_MAP_ELEMENT(tim_cl)
+REGISTER_MAP_ELEMENT(gpio_dout)
+REGISTER_MAP_ELEMENT(gpio_din)
+REGISTER_MAP_ELEMENT(gpio_dir)
+REGISTER_MAP_ELEMENT(watchdog)
+REGISTER_MAP_ELEMENT(front_panel)
+REGISTER_MAP_ELEMENT(misc_clk_ctl1)
+REGISTER_MAP_ELEMENT(misc_clk_ctl2)
+REGISTER_MAP_ELEMENT(crt_ext_ctl)
+REGISTER_MAP_ELEMENT(register_maps)
#define CRONUS_11 0x0B4C1C21
#define CRONUSLITE_10 0x0B4C1C40
-#define NAND_FLASH_BASE 0x03000000
-#define ZEUS_IO_BASE 0x09000000
+#define NAND_FLASH_BASE 0x03000000
#define CALLIOPE_IO_BASE 0x08000000
-#define CRONUS_IO_BASE 0x09000000
-#define ASIC_IO_SIZE 0x01000000
+#define CRONUS_IO_BASE 0x09000000
+#define ZEUS_IO_BASE 0x09000000
+
+#define ASIC_IO_SIZE 0x01000000
/* Definitions for backward compatibility */
#define UART1_INTSTAT uart1_intstat
#define UART1_STATUS uart1_status
/* ASIC register enumeration */
+union register_map_entry {
+ unsigned long phys;
+ u32 *virt;
+};
+
+#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
struct register_map {
- u32 eic_slow0_strt_add;
- u32 eic_cfg_bits;
- u32 eic_ready_status;
-
- u32 chipver3;
- u32 chipver2;
- u32 chipver1;
- u32 chipver0;
-
- u32 uart1_intstat;
- u32 uart1_inten;
- u32 uart1_config1;
- u32 uart1_config2;
- u32 uart1_divisorhi;
- u32 uart1_divisorlo;
- u32 uart1_data;
- u32 uart1_status;
-
- u32 int_stat_3;
- u32 int_stat_2;
- u32 int_stat_1;
- u32 int_stat_0;
- u32 int_config;
- u32 int_int_scan;
- u32 ien_int_3;
- u32 ien_int_2;
- u32 ien_int_1;
- u32 ien_int_0;
- u32 int_level_3_3;
- u32 int_level_3_2;
- u32 int_level_3_1;
- u32 int_level_3_0;
- u32 int_level_2_3;
- u32 int_level_2_2;
- u32 int_level_2_1;
- u32 int_level_2_0;
- u32 int_level_1_3;
- u32 int_level_1_2;
- u32 int_level_1_1;
- u32 int_level_1_0;
- u32 int_level_0_3;
- u32 int_level_0_2;
- u32 int_level_0_1;
- u32 int_level_0_0;
- u32 int_docsis_en;
-
- u32 mips_pll_setup;
- u32 usb_fs;
- u32 test_bus;
- u32 crt_spare;
- u32 usb2_ohci_int_mask;
- u32 usb2_strap;
- u32 ehci_hcapbase;
- u32 ohci_hc_revision;
- u32 bcm1_bs_lmi_steer;
- u32 usb2_control;
- u32 usb2_stbus_obc;
- u32 usb2_stbus_mess_size;
- u32 usb2_stbus_chunk_size;
-
- u32 pcie_regs;
- u32 tim_ch;
- u32 tim_cl;
- u32 gpio_dout;
- u32 gpio_din;
- u32 gpio_dir;
- u32 watchdog;
- u32 front_panel;
-
- u32 register_maps;
+#include <asm/mach-powertv/asic_reg_map.h>
};
+#undef REGISTER_MAP_ELEMENT
+
+/**
+ * register_map_offset_phys - add an offset to the physical address
+ * @map: Pointer to the &struct register_map
+ * @offset: Value to add
+ *
+ * Only adds the base to non-zero physical addresses
+ */
+static inline void register_map_offset_phys(struct register_map *map,
+ unsigned long offset)
+{
+#define REGISTER_MAP_ELEMENT(x) do { \
+ if (map->x.phys != 0) \
+ map->x.phys += offset; \
+ } while (false);
+
+#include <asm/mach-powertv/asic_reg_map.h>
+#undef REGISTER_MAP_ELEMENT
+}
+
+/**
+ * register_map_virtualize - Convert ®ister_map to virtual addresses
+ * @map: Pointer to ®ister_map to virtualize
+ */
+static inline void register_map_virtualize(struct register_map *map)
+{
+#define REGISTER_MAP_ELEMENT(x) do { \
+ map->x.virt = (!map->x.phys) ? NULL : \
+ UNCAC_ADDR(phys_to_virt(map->x.phys)); \
+ } while (false);
+
+#include <asm/mach-powertv/asic_reg_map.h>
+#undef REGISTER_MAP_ELEMENT
+}
-extern enum asic_type asic;
-extern const struct register_map *register_map;
-extern unsigned long asic_phy_base; /* Physical address of ASIC */
-extern unsigned long asic_base; /* Virtual address of ASIC */
+extern struct register_map _asic_register_map;
/*
* Macros to interface to registers through their ioremapped address
- * asic_reg_offset Returns the offset of a given register from the start
- * of the ASIC address space
* asic_reg_phys_addr Returns the physical address of the given register
* asic_reg_addr Returns the iomapped virtual address of the given
* register.
*/
-#define asic_reg_offset(x) (register_map->x)
-#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x))
-#define asic_reg_addr(x) \
- ((unsigned int *) (asic_base + asic_reg_offset(x)))
+#define asic_reg_addr(x) (_asic_register_map.x.virt)
+#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \
+ (unsigned long) asic_reg_addr(x))))
/*
* The asic_reg macro is gone. It should be replaced by either asic_read or
#define ST0_CU3 0x80000000
#define ST0_XX 0x80000000 /* MIPS IV naming */
+/*
+ * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2)
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define INTCTLB_IPPCI 26
+#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI)
+#define INTCTLB_IPTI 29
+#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI)
+
/*
* Bitfields and bit numbers in the coprocessor 0 cause register.
*
#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
#define CAUSEF_CE (_ULCAST_(3) << 28)
+#define CAUSEB_TI 30
+#define CAUSEF_TI (_ULCAST_(1) << 30)
#define CAUSEB_BD 31
#define CAUSEF_BD (_ULCAST_(1) << 31)
*/
static int c0_compare_int_pending(void)
{
- return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
}
/*
* Timer interrupt
*/
int cp0_compare_irq;
+int cp0_compare_irq_shift;
/*
* Performance counter IRQ or -1 if shared with timer
* o read IntCtl.IPPCI to determine the performance counter interrupt
*/
if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+ cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+ cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1;
} else {
set_io_port_base(0xbfd00000);
serial_init();
-
- pr_info("Linux started...\n");
-
}
extern struct plat_smp_ops ssmtc_smp_ops;
{
set_io_port_base(0xbfd00000);
- pr_info("\nLINUX started...\n");
prom_meminit();
#ifdef CONFIG_MIPS_MT_SMP
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
}
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
enum label_id {
label_second_part = 1,
label_leave,
-#ifdef MODULE_START
- label_module_alloc,
-#endif
label_vmalloc,
label_vmalloc_done,
label_tlbw_hazard,
UASM_L_LA(_second_part)
UASM_L_LA(_leave)
-#ifdef MODULE_START
-UASM_L_LA(_module_alloc)
-#endif
UASM_L_LA(_vmalloc)
UASM_L_LA(_vmalloc_done)
UASM_L_LA(_tlbw_hazard)
} else {
#if defined(CONFIG_HUGETLB_PAGE)
const enum label_id ls = label_tlb_huge_update;
-#elif defined(MODULE_START)
- const enum label_id ls = label_module_alloc;
#else
const enum label_id ls = label_vmalloc;
#endif
board_nmi_handler_setup = mips_nmi_setup;
board_ejtag_handler_setup = mips_ejtag_setup;
- pr_info("\nLINUX started...\n");
prom_init_cmdline();
prom_meminit();
#ifdef CONFIG_SERIAL_8250_CONSOLE
# under Linux.
#
-obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
EXTRA_CFLAGS += -Wall -Werror
* Description: Defines the platform resources for the SA settop.
*/
+#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map calliope_register_map = {
- .eic_slow0_strt_add = 0x800000,
- .eic_cfg_bits = 0x800038,
- .eic_ready_status = 0x80004c,
+#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
- .chipver3 = 0xA00800,
- .chipver2 = 0xA00804,
- .chipver1 = 0xA00808,
- .chipver0 = 0xA0080c,
+const struct register_map calliope_register_map __initdata = {
+ .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
+ .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
+ .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
+
+ .chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)},
+ .chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)},
+ .chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)},
+ .chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)},
/* The registers of IRBlaster */
- .uart1_intstat = 0xA01800,
- .uart1_inten = 0xA01804,
- .uart1_config1 = 0xA01808,
- .uart1_config2 = 0xA0180C,
- .uart1_divisorhi = 0xA01810,
- .uart1_divisorlo = 0xA01814,
- .uart1_data = 0xA01818,
- .uart1_status = 0xA0181C,
+ .uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)},
+ .uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)},
+ .uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)},
+ .uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)},
+ .uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)},
+ .uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)},
+ .uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)},
+ .uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)},
- .int_stat_3 = 0xA02800,
- .int_stat_2 = 0xA02804,
- .int_stat_1 = 0xA02808,
- .int_stat_0 = 0xA0280c,
- .int_config = 0xA02810,
- .int_int_scan = 0xA02818,
- .ien_int_3 = 0xA02830,
- .ien_int_2 = 0xA02834,
- .ien_int_1 = 0xA02838,
- .ien_int_0 = 0xA0283c,
- .int_level_3_3 = 0xA02880,
- .int_level_3_2 = 0xA02884,
- .int_level_3_1 = 0xA02888,
- .int_level_3_0 = 0xA0288c,
- .int_level_2_3 = 0xA02890,
- .int_level_2_2 = 0xA02894,
- .int_level_2_1 = 0xA02898,
- .int_level_2_0 = 0xA0289c,
- .int_level_1_3 = 0xA028a0,
- .int_level_1_2 = 0xA028a4,
- .int_level_1_1 = 0xA028a8,
- .int_level_1_0 = 0xA028ac,
- .int_level_0_3 = 0xA028b0,
- .int_level_0_2 = 0xA028b4,
- .int_level_0_1 = 0xA028b8,
- .int_level_0_0 = 0xA028bc,
- .int_docsis_en = 0xA028F4,
+ .int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)},
+ .int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)},
+ .int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)},
+ .int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)},
+ .int_config = {.phys = CALLIOPE_ADDR(0xA02810)},
+ .int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)},
+ .ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)},
+ .ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)},
+ .ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)},
+ .ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)},
+ .int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)},
+ .int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)},
+ .int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)},
+ .int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)},
+ .int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)},
+ .int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)},
+ .int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)},
+ .int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)},
+ .int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)},
+ .int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)},
+ .int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)},
+ .int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)},
+ .int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)},
+ .int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)},
+ .int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)},
+ .int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)},
+ .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
- .mips_pll_setup = 0x980000,
- .usb_fs = 0x980030, /* -default 72800028- */
- .test_bus = 0x9800CC,
- .crt_spare = 0x9800d4,
- .usb2_ohci_int_mask = 0x9A000c,
- .usb2_strap = 0x9A0014,
- .ehci_hcapbase = 0x9BFE00,
- .ohci_hc_revision = 0x9BFC00,
- .bcm1_bs_lmi_steer = 0x9E0004,
- .usb2_control = 0x9E0054,
- .usb2_stbus_obc = 0x9BFF00,
- .usb2_stbus_mess_size = 0x9BFF04,
- .usb2_stbus_chunk_size = 0x9BFF08,
+ .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
+ .usb_fs = {.phys = CALLIOPE_ADDR(0x980030)},
+ .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
+ .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
+ .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
+ .usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)},
+ .ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)},
+ .ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)},
+ .bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)},
+ .usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)},
+ .usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)},
+ .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
+ .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
- .pcie_regs = 0x000000, /* -doesn't exist- */
- .tim_ch = 0xA02C10,
- .tim_cl = 0xA02C14,
- .gpio_dout = 0xA02c20,
- .gpio_din = 0xA02c24,
- .gpio_dir = 0xA02c2C,
- .watchdog = 0xA02c30,
- .front_panel = 0x000000, /* -not used- */
+ .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */
+ .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
+ .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
+ .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
+ .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
+ .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
+ .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
+ .front_panel = {.phys = 0x000000}, /* -not used- */
};
* Description: Defines the platform resources for the SA settop.
*/
+#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map cronus_register_map = {
- .eic_slow0_strt_add = 0x000000,
- .eic_cfg_bits = 0x000038,
- .eic_ready_status = 0x00004C,
+#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
- .chipver3 = 0x2A0800,
- .chipver2 = 0x2A0804,
- .chipver1 = 0x2A0808,
- .chipver0 = 0x2A080C,
+const struct register_map cronus_register_map __initdata = {
+ .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
+ .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
+ .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
+
+ .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
+ .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
+ .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
+ .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
/* The registers of IRBlaster */
- .uart1_intstat = 0x2A1800,
- .uart1_inten = 0x2A1804,
- .uart1_config1 = 0x2A1808,
- .uart1_config2 = 0x2A180C,
- .uart1_divisorhi = 0x2A1810,
- .uart1_divisorlo = 0x2A1814,
- .uart1_data = 0x2A1818,
- .uart1_status = 0x2A181C,
+ .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
+ .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
+ .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
+ .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
+ .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
+ .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
+ .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
+ .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
- .int_stat_3 = 0x2A2800,
- .int_stat_2 = 0x2A2804,
- .int_stat_1 = 0x2A2808,
- .int_stat_0 = 0x2A280C,
- .int_config = 0x2A2810,
- .int_int_scan = 0x2A2818,
- .ien_int_3 = 0x2A2830,
- .ien_int_2 = 0x2A2834,
- .ien_int_1 = 0x2A2838,
- .ien_int_0 = 0x2A283C,
- .int_level_3_3 = 0x2A2880,
- .int_level_3_2 = 0x2A2884,
- .int_level_3_1 = 0x2A2888,
- .int_level_3_0 = 0x2A288C,
- .int_level_2_3 = 0x2A2890,
- .int_level_2_2 = 0x2A2894,
- .int_level_2_1 = 0x2A2898,
- .int_level_2_0 = 0x2A289C,
- .int_level_1_3 = 0x2A28A0,
- .int_level_1_2 = 0x2A28A4,
- .int_level_1_1 = 0x2A28A8,
- .int_level_1_0 = 0x2A28AC,
- .int_level_0_3 = 0x2A28B0,
- .int_level_0_2 = 0x2A28B4,
- .int_level_0_1 = 0x2A28B8,
- .int_level_0_0 = 0x2A28BC,
- .int_docsis_en = 0x2A28F4,
+ .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
+ .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
+ .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
+ .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
+ .int_config = {.phys = CRONUS_ADDR(0x2A2810)},
+ .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
+ .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
+ .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
+ .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
+ .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
+ .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
+ .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
+ .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
+ .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
+ .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
+ .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
+ .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
+ .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
+ .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
+ .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
+ .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
+ .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
+ .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
+ .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
+ .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
+ .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
+ .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
- .mips_pll_setup = 0x1C0000,
- .usb_fs = 0x1C0018,
- .test_bus = 0x1C00CC,
- .crt_spare = 0x1c00d4,
- .usb2_ohci_int_mask = 0x20000C,
- .usb2_strap = 0x200014,
- .ehci_hcapbase = 0x21FE00,
- .ohci_hc_revision = 0x1E0000,
- .bcm1_bs_lmi_steer = 0x2E0008,
- .usb2_control = 0x2E004C,
- .usb2_stbus_obc = 0x21FF00,
- .usb2_stbus_mess_size = 0x21FF04,
- .usb2_stbus_chunk_size = 0x21FF08,
+ .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
+ .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)},
+ .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
+ .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
+ .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
+ .usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
+ .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
+ .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)},
+ .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
+ .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
+ .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
+ .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
+ .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
- .pcie_regs = 0x220000,
- .tim_ch = 0x2A2C10,
- .tim_cl = 0x2A2C14,
- .gpio_dout = 0x2A2C20,
- .gpio_din = 0x2A2C24,
- .gpio_dir = 0x2A2C2C,
- .watchdog = 0x2A2C30,
- .front_panel = 0x2A3800,
+ .pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
+ .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
+ .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
+ .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
+ .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
+ .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
+ .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
+ .front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
};
* Description: Defines the platform resources for the SA settop.
*/
+#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map zeus_register_map = {
- .eic_slow0_strt_add = 0x000000,
- .eic_cfg_bits = 0x000038,
- .eic_ready_status = 0x00004c,
+#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
- .chipver3 = 0x280800,
- .chipver2 = 0x280804,
- .chipver1 = 0x280808,
- .chipver0 = 0x28080c,
+const struct register_map zeus_register_map __initdata = {
+ .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
+ .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
+ .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
+
+ .chipver3 = {.phys = ZEUS_ADDR(0x280800)},
+ .chipver2 = {.phys = ZEUS_ADDR(0x280804)},
+ .chipver1 = {.phys = ZEUS_ADDR(0x280808)},
+ .chipver0 = {.phys = ZEUS_ADDR(0x28080c)},
/* The registers of IRBlaster */
- .uart1_intstat = 0x281800,
- .uart1_inten = 0x281804,
- .uart1_config1 = 0x281808,
- .uart1_config2 = 0x28180C,
- .uart1_divisorhi = 0x281810,
- .uart1_divisorlo = 0x281814,
- .uart1_data = 0x281818,
- .uart1_status = 0x28181C,
+ .uart1_intstat = {.phys = ZEUS_ADDR(0x281800)},
+ .uart1_inten = {.phys = ZEUS_ADDR(0x281804)},
+ .uart1_config1 = {.phys = ZEUS_ADDR(0x281808)},
+ .uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)},
+ .uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)},
+ .uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)},
+ .uart1_data = {.phys = ZEUS_ADDR(0x281818)},
+ .uart1_status = {.phys = ZEUS_ADDR(0x28181C)},
- .int_stat_3 = 0x282800,
- .int_stat_2 = 0x282804,
- .int_stat_1 = 0x282808,
- .int_stat_0 = 0x28280c,
- .int_config = 0x282810,
- .int_int_scan = 0x282818,
- .ien_int_3 = 0x282830,
- .ien_int_2 = 0x282834,
- .ien_int_1 = 0x282838,
- .ien_int_0 = 0x28283c,
- .int_level_3_3 = 0x282880,
- .int_level_3_2 = 0x282884,
- .int_level_3_1 = 0x282888,
- .int_level_3_0 = 0x28288c,
- .int_level_2_3 = 0x282890,
- .int_level_2_2 = 0x282894,
- .int_level_2_1 = 0x282898,
- .int_level_2_0 = 0x28289c,
- .int_level_1_3 = 0x2828a0,
- .int_level_1_2 = 0x2828a4,
- .int_level_1_1 = 0x2828a8,
- .int_level_1_0 = 0x2828ac,
- .int_level_0_3 = 0x2828b0,
- .int_level_0_2 = 0x2828b4,
- .int_level_0_1 = 0x2828b8,
- .int_level_0_0 = 0x2828bc,
- .int_docsis_en = 0x2828F4,
+ .int_stat_3 = {.phys = ZEUS_ADDR(0x282800)},
+ .int_stat_2 = {.phys = ZEUS_ADDR(0x282804)},
+ .int_stat_1 = {.phys = ZEUS_ADDR(0x282808)},
+ .int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)},
+ .int_config = {.phys = ZEUS_ADDR(0x282810)},
+ .int_int_scan = {.phys = ZEUS_ADDR(0x282818)},
+ .ien_int_3 = {.phys = ZEUS_ADDR(0x282830)},
+ .ien_int_2 = {.phys = ZEUS_ADDR(0x282834)},
+ .ien_int_1 = {.phys = ZEUS_ADDR(0x282838)},
+ .ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)},
+ .int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)},
+ .int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)},
+ .int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)},
+ .int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)},
+ .int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)},
+ .int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)},
+ .int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)},
+ .int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)},
+ .int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)},
+ .int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)},
+ .int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)},
+ .int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)},
+ .int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)},
+ .int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)},
+ .int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)},
+ .int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)},
+ .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
- .mips_pll_setup = 0x1a0000,
- .usb_fs = 0x1a0018,
- .test_bus = 0x1a0238,
- .crt_spare = 0x1a0090,
- .usb2_ohci_int_mask = 0x1e000c,
- .usb2_strap = 0x1e0014,
- .ehci_hcapbase = 0x1FFE00,
- .ohci_hc_revision = 0x1FFC00,
- .bcm1_bs_lmi_steer = 0x2C0008,
- .usb2_control = 0x2c01a0,
- .usb2_stbus_obc = 0x1FFF00,
- .usb2_stbus_mess_size = 0x1FFF04,
- .usb2_stbus_chunk_size = 0x1FFF08,
+ .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
+ .usb_fs = {.phys = ZEUS_ADDR(0x1a0018)},
+ .test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
+ .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
+ .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
+ .usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)},
+ .ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)},
+ .ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)},
+ .bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)},
+ .usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)},
+ .usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)},
+ .usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)},
+ .usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)},
- .pcie_regs = 0x200000,
- .tim_ch = 0x282C10,
- .tim_cl = 0x282C14,
- .gpio_dout = 0x282c20,
- .gpio_din = 0x282c24,
- .gpio_dir = 0x282c2C,
- .watchdog = 0x282c30,
- .front_panel = 0x283800,
+ .pcie_regs = {.phys = ZEUS_ADDR(0x200000)},
+ .tim_ch = {.phys = ZEUS_ADDR(0x282C10)},
+ .tim_cl = {.phys = ZEUS_ADDR(0x282C14)},
+ .gpio_dout = {.phys = ZEUS_ADDR(0x282c20)},
+ .gpio_din = {.phys = ZEUS_ADDR(0x282c24)},
+ .gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)},
+ .watchdog = {.phys = ZEUS_ADDR(0x282c30)},
+ .front_panel = {.phys = ZEUS_ADDR(0x283800)},
};
unsigned int platform_features;
unsigned int platform_family;
-const struct register_map *register_map;
-EXPORT_SYMBOL(register_map); /* Exported for testing */
+struct register_map _asic_register_map;
+EXPORT_SYMBOL(_asic_register_map); /* Exported for testing */
unsigned long asic_phy_base;
unsigned long asic_base;
EXPORT_SYMBOL(asic_base); /* Exported for testing */
{
}
+static void __init set_register_map(unsigned long phys_base,
+ const struct register_map *map)
+{
+ asic_phy_base = phys_base;
+ _asic_register_map = *map;
+ register_map_virtualize(&_asic_register_map);
+ asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE);
+}
+
/**
* configure_platform - configuration based on platform type.
*/
case FAMILY_1500VZF:
platform_features = FFS_CAPABLE;
asic = ASIC_CALLIOPE;
- asic_phy_base = CALLIOPE_IO_BASE;
- register_map = &calliope_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(CALLIOPE_IO_BASE, &calliope_register_map);
if (platform_family == FAMILY_1500VZE) {
gp_resources = non_dvr_vze_calliope_resources;
platform_features = FFS_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_ZEUS;
- asic_phy_base = ZEUS_IO_BASE;
- register_map = &zeus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(ZEUS_IO_BASE, &zeus_register_map);
gp_resources = non_dvr_zeus_resources;
pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
/* The settop has PCIE but it isn't used, so don't advertise
* it*/
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
- asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */
- register_map = &cronus_register_map; /* same as Cronus */
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
- gp_resources = non_dvr_cronuslite_resources;
/* ASIC version will determine if this is a real CronusLite or
* Castrati(Cronus) */
else
asic = ASIC_CRONUSLITE;
+ /* Cronus and Cronus Lite have the same register map */
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+ gp_resources = non_dvr_cronuslite_resources;
pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
"chipversion=0x%08X\n",
(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
case FAMILY_4600VZA:
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
asic = ASIC_CRONUS;
- asic_phy_base = CRONUS_IO_BASE;
- register_map = &cronus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
gp_resources = non_dvr_cronus_resources;
pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
platform_features = DVR_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_ZEUS;
- asic_phy_base = ZEUS_IO_BASE;
- register_map = &zeus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(ZEUS_IO_BASE, &zeus_register_map);
gp_resources = dvr_zeus_resources;
pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
platform_features = DVR_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_CRONUS;
- asic_phy_base = CRONUS_IO_BASE;
- register_map = &cronus_register_map;
- asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
- ASIC_IO_SIZE);
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
gp_resources = dvr_cronus_resources;
pr_info("Platform: 8600/Vz Class B - CRONUS, "
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Kernel command line creation using the prom monitor (YAMON) argc/argv.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include "init.h"
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension.
- */
-#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
-
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
-void __init prom_init_cmdline(void)
-{
- int len;
-
- if (prom_argc != 1)
- return;
-
- len = strlen(arcs_cmdline);
-
- arcs_cmdline[len] = ' ';
-
- strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
- COMMAND_LINE_SIZE - len - 1);
-}
#include <asm/mips-boards/generic.h>
#include <asm/mach-powertv/asic.h>
-#include "init.h"
-
-int prom_argc;
-int *_prom_argv, *_prom_envp;
+static int *_prom_envp;
unsigned long _prom_memsize;
/*
void __init prom_init(void)
{
+ int prom_argc;
+ char *prom_argv;
+
prom_argc = fw_arg0;
- _prom_argv = (int *) fw_arg1;
+ prom_argv = (char *) fw_arg1;
_prom_envp = (int *) fw_arg2;
_prom_memsize = (unsigned long) fw_arg3;
board_nmi_handler_setup = mips_nmi_setup;
board_ejtag_handler_setup = mips_ejtag_setup;
- pr_info("\nLINUX started...\n");
- prom_init_cmdline();
+ if (prom_argc == 1)
+ strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
+
configure_platform();
prom_meminit();
#ifndef _POWERTV_INIT_H
#define _POWERTV_INIT_H
-extern int prom_argc;
-extern int *_prom_argv;
extern unsigned long _prom_memsize;
#endif
#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */
#define PHYS_MEM_START 0x10000000 /* Start of physical memory */
-unsigned long ptv_memsize;
-
char __initdata cmdline[COMMAND_LINE_SIZE];
void __init prom_meminit(void)
}
}
- /* Store memsize for diagnostic purposes */
- ptv_memsize = memsize;
-
physend = PFN_ALIGN(&_end) - 0x80000000;
if (memsize > LOW_MEM_MAX) {
low_mem = LOW_MEM_MAX;
#define REG_SIZE "4" /* In bytes */
#endif
-static struct pt_regs die_regs;
-static bool have_die_regs;
-
static void register_panic_notifier(void);
static int panic_handler(struct notifier_block *notifier_block,
unsigned long event, void *cause_string);
return NOTIFY_DONE;
}
-/**
- * Platform-specific handling of oops
- * @str: Pointer to the oops string
- * @regs: Pointer to the oops registers
- * All we do here is to save the registers for subsequent printing through
- * the panic notifier.
- */
-void platform_die(const char *str, const struct pt_regs *regs)
-{
- /* If we already have saved registers, don't overwrite them as they
- * they apply to the initial fault */
-
- if (!have_die_regs) {
- have_die_regs = true;
- die_regs = *regs;
- }
-}
-
/* Information about the RF MAC address, if one was supplied on the
* command line. */
static bool have_rfmac;
#include <asm/mach-powertv/asic_regs.h>
#include "reset.h"
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
static void mips_machine_restart(char *command)
{
#ifdef CONFIG_BOOTLOADER_DRIVER
#endif
}
-static void mips_machine_halt(void)
-{
-#ifdef CONFIG_BOOTLOADER_DRIVER
- /*
- * Call the bootloader's reset function to ensure
- * that persistent data is flushed before hard reset
- */
- kbldr_SetCauseAndReset();
-#else
- writel(0x1, asic_reg_addr(watchdog));
-#endif
-}
-
void mips_reboot_setup(void)
{
_machine_restart = mips_machine_restart;
- _machine_halt = mips_machine_halt;
- pm_power_off = mips_machine_halt;
}
void __init plat_time_init(void)
{
powertv_clocksource_init();
- r4k_clockevent_init();
}
(num_physpages - tmp) << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
}
int argc;
int *argv32;
int i; /* Always ignore the "-c" at argv[0] */
- static char builtin[COMMAND_LINE_SIZE] __initdata;
if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
/*
argv32 = (int *)fw_arg1;
}
- /* ignore all built-in args if any f/w args given */
- /*
- * But if built-in strings was started with '+', append them
- * to command line args. If built-in was started with '-',
- * ignore all f/w args.
- */
- builtin[0] = '\0';
- if (arcs_cmdline[0] == '+')
- strcpy(builtin, arcs_cmdline + 1);
- else if (arcs_cmdline[0] == '-') {
- strcpy(builtin, arcs_cmdline + 1);
- argc = 0;
- } else if (argc <= 1)
- strcpy(builtin, arcs_cmdline);
arcs_cmdline[0] = '\0';
for (i = 1; i < argc; i++) {
} else
strcat(arcs_cmdline, str);
}
- /* append saved builtin args */
- if (builtin[0]) {
- if (arcs_cmdline[0])
- strcat(arcs_cmdline, " ");
- strcat(arcs_cmdline, builtin);
- }
}
static int txx9_ic_disable __initdata;
/*
* init.c, Common initialization routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
+ * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
argv = (char **)fw_arg1;
for (i = 1; i < argc; i++) {
- strcat(arcs_cmdline, argv[i]);
+ strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
if (i < (argc - 1))
- strcat(arcs_cmdline, " ");
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
}
KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
LDFLAGS :=
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+OBJCOPYFLAGS := -O binary -R .note -R .comment -R .GCC-command-line -R .note.gnu.build-id -S
#LDFLAGS_vmlinux := -Map linkmap.txt
CHECKFLAGS +=
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 11:13:22 2009
+# Linux kernel version: 2.6.33-rc1
+# Tue Dec 22 19:26:25 2009
#
CONFIG_MN10300=y
CONFIG_AM33=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HZ=1000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# Power management options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# File systems
#
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
unsigned long __ffs(unsigned long x)
{
int bit;
- asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x) : "cc");
return bit;
}
int __ilog2_u32(u32 n)
{
int bit;
- asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n) : "cc");
return bit;
}
* MDR = MDR:val%div */
: "=r"(result)
: "0"(val), "ir"(mult), "r"(div)
+ : "cc"
);
return result;
* MDR = MDR:val%div */
: "=r"(result)
: "0"(val), "ir"(mult), "r"(div)
+ : "cc"
);
return result;
" mov %0,epsw \n" \
: "=&d"(tmp) \
: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
+ : "cc" \
); \
} while (0)
" mov %0,%1 \n" \
: "=d"(w) \
: "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
- : "memory" \
+ : "cc", "memory" \
); \
} while (0)
" .previous\n" \
: "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
: "0"(__from), "1"(__to), "2"(size) \
- : "memory"); \
+ : "cc", "memory"); \
} \
} while (0)
" .previous\n" \
: "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
: "0"(__from), "1"(__to), "2"(size) \
- : "memory"); \
+ : "cc", "memory"); \
} \
} while (0)
#define __NR_pwritev 335
#define __NR_rt_tgsigqueueinfo 336
#define __NR_perf_event_open 337
+#define __NR_recvmmsg 338
#ifdef __KERNEL__
-#define NR_syscalls 338
+#define NR_syscalls 339
/*
* specify the deprecated syscalls we want to support on this arch
.long sys_pwritev /* 335 */
.long sys_rt_tgsigqueueinfo
.long sys_perf_event_open
+ .long sys_recvmmsg
nr_syscalls=(.-sys_call_table)/4
u32 epsw;
asm volatile(" bclr %1,(%2) \n"
" mov epsw,%0 \n"
- : "=d"(epsw) : "d"(mask), "a"(ptr));
+ : "=d"(epsw) : "d"(mask), "a"(ptr)
+ : "cc", "memory");
return !(epsw & EPSW_FLAG_Z);
}
/* this is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!on_sig_stack(sp))
+ if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
}
" addc 0xffff,%0 \n"
: "=r" (sum)
: "r" (sum << 16), "0" (sum & 0xffff0000)
+ : "cc"
);
return sum >> 16;
}
"2: add -1,%0 \n"
" bne 2b \n"
: "=&d" (d0)
- : "0" (loops));
+ : "0" (loops)
+ : "cc");
}
EXPORT_SYMBOL(__delay);
" .previous" \
:"=&r"(res), "=r"(count), "=&r"(w) \
:"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \
- :"memory"); \
+ : "memory", "cc"); \
} while (0)
long
".previous\n" \
: "+r"(size), "=&r"(w) \
: "a"(addr), "d"(0) \
- : "memory"); \
+ : "memory", "cc"); \
} while (0)
unsigned long
".previous\n"
:"=d"(res), "=&r"(w)
:"0"(0), "a"(s), "r"(n)
- :"memory");
+ : "memory", "cc");
return res;
}
#include <linux/pci.h>
#include <asm/io.h>
+static unsigned long pci_sram_allocated = 0xbc000000;
+
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, int gfp)
{
unsigned long addr;
void *ret;
+ printk("dma_alloc_coherent(%s,%zu,,%x)\n", dev_name(dev), size, gfp);
+
+ if (0xbe000000 - pci_sram_allocated >= size) {
+ size = (size + 255) & ~255;
+ addr = pci_sram_allocated;
+ pci_sram_allocated += size;
+ ret = (void *) addr;
+ goto done;
+ }
+
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
/* write back and evict all cache lines covering this region */
mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+done:
*dma_handle = virt_to_bus((void *) addr);
+ printk("dma_alloc_coherent() = %p [%x]\n", ret, *dma_handle);
return ret;
}
EXPORT_SYMBOL(dma_alloc_coherent);
{
unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+ if (addr >= 0x9c000000)
+ return;
+
free_pages(addr, get_order(size));
}
EXPORT_SYMBOL(dma_free_coherent);
reservedpages << (PAGE_SHIFT - 10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
- );
+ totalhigh_pages << (PAGE_SHIFT - 10));
}
/*
goto displace_or_inc;
case SD24:
tmp = disp << 8;
- asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+ asm("asr 8,%0" : "=r"(tmp) : "0"(tmp) : "cc");
disp = (long) tmp;
goto displace_or_inc;
case SIMM4_2:
tmp = opcode >> 4 & 0x0f;
tmp <<= 28;
- asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+ asm("asr 28,%0" : "=r"(tmp) : "0"(tmp) : "cc");
disp = (long) tmp;
goto displace_or_inc;
case IMM8:
#ifndef _ASM_UNIT_SERIAL_H
#define _ASM_UNIT_SERIAL_H
-#include <asm/cpu/cpu-regs.h>
+#include <asm/cpu-regs.h>
#include <proc/irq.h>
#include <linux/serial_reg.h>
#include <linux/irq.h>
#endif /* __ASSEMBLY__ */
-#include <asm/cpu/timer-regs.h>
+#include <asm/timer-regs.h>
#include <unit/clock.h>
/*
#include <linux/init.h>
#include <asm/io.h>
#include <asm/processor.h>
-#include <asm/cpu/intctl-regs.h>
-#include <asm/cpu/rtc-regs.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
#include <unit/leds.h>
static const u8 asb2305_led_hex_tbl[16] = {
pcibios_allocate_resources(1);
}
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
-
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = &dev->resource[idx];
-
- if (!r->start && r->end) {
- printk(KERN_ERR
- "PCI: Device %s not available because of"
- " resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
-
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
-
- if (cmd != old_cmd)
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- return 0;
-}
-
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
extern unsigned int pcibios_max_latency;
extern void pcibios_resource_survey(void);
-extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
/* pci.c */
struct pci_bus *pci_root_bus;
struct pci_ops *pci_root_ops;
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0xbe000000,
+ .end = 0xbe03ffff,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0xb8000000,
+ .end = 0xbbffffff,
+ .flags = IORESOURCE_MEM,
+};
+
/*
* Functions for accessing PCI configuration space
*/
(x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
return 1;
- printk(KERN_ERROR "PCI: Sanity check failed\n");
+ printk(KERN_ERR "PCI: Sanity check failed\n");
return 0;
}
printk(KERN_INFO "PCI: Using configuration ampci\n");
request_mem_region(0xBE040000, 256, "AMPCI bridge");
request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+ request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM");
return 0;
}
{
struct pci_dev *dev;
+ if (bus->number == 0) {
+ bus->resource[0] = &pci_ioport_resource;
+ bus->resource[1] = &pci_iomem_resource;
+ }
+
if (bus->self) {
pci_read_bridge_bases(bus);
pcibios_fixup_device_resources(bus->self);
iomem_resource.start = 0xA0000000;
iomem_resource.end = 0xDFFFFFFF;
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
if (!pci_probe)
return 0;
printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
MEM_PAGING_REG);
- {
-#if 0
- static struct pci_bus am33_root_bus = {
- .children = LIST_HEAD_INIT(am33_root_bus.children),
- .devices = LIST_HEAD_INIT(am33_root_bus.devices),
- .number = 0,
- .secondary = 0,
- .resource = { &ioport_resource, &iomem_resource },
- };
-
- am33_root_bus.ops = pci_root_ops;
- list_add_tail(&am33_root_bus.node, &pci_root_buses);
-
- am33_root_bus.subordinate = pci_do_scan_bus(0);
-
- pci_root_bus = &am33_root_bus;
-#else
- pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
-#endif
- }
+ pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
pcibios_irq_init();
pcibios_fixup_irqs();
-#if 0
pcibios_resource_survey();
-#endif
return 0;
}
{
int err;
- err = pcibios_enable_resources(dev, mask);
+ err = pci_enable_resources(dev, mask);
if (err == 0)
pcibios_enable_irq(dev);
return err;
bus->number = 0;
+ o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID, 4, &x);
o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
x |= PCI_COMMAND_MASTER |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/processor.h>
-#include <asm/cpu/intctl-regs.h>
-#include <asm/cpu/rtc-regs.h>
-#include <asm/cpu/serial-regs.h>
+#include <asm/intctl-regs.h>
+#include <asm/serial-regs.h>
#include <unit/serial.h>
/*
# cross-compilation prefix
CROSS=
+# mkimage wrapper script
+MKIMAGE=$srctree/scripts/mkuboot.sh
+
# directory for object and other files used by this script
object=arch/powerpc/boot
objbin=$object
case "$platform" in
uboot)
rm -f "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
+ ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
;;
cuboot*)
gzip -f -9 "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
+ ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$uboot_version -d "$ofile".gz "$ofile"
;;
treeboot*)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:07 2009
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:08 2009
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:25 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:10 2009
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:23 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:14 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:21 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:14 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:22 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:15 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:23 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:16 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:17 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:18 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:25 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:19 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:26 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:20 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:27 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:21 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:28 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:21 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:23 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:29 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:22 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:24 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:31 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:25 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:32 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:26 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:33 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:27 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:34 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:28 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:35 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:29 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:36 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:29 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:30 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
CONFIG_SBC8560=y
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:31 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:38 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:32 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:39 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:33 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:40 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:34 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:41 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:35 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:42 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:36 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:43 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:36 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_TQM8560=y
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:44 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:37 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:49 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:43 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:47 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:41 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:48 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:42 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:39 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:46 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:40 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:38 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:04 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:58 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:05 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:59 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_PPC_C2K=y
CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
+# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_SELINUX=y
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:06 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:59 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:07 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:00 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:08 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:01 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:09 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:02 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# CONFIG_I2C_PARPORT_LIGHT is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:03 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_AUDIT_ARCH=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:21 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 15:08:52 2009
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
+# CONFIG_PPC_RTAS_DAEMON is not set
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=m
CONFIG_SIMPLE_GPIO=y
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_MPC52xx is not set
CONFIG_SPI_MPC52xx_PSC=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:04 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:11 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:05 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:12 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:06 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:25:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:06 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
CONFIG_TQM8560=y
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:26:01 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:07 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
CONFIG_TQM8560=y
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:15 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:08 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_AUDIT_ARCH=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:16 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:09 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:10 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:11 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:18 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:12 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_PPC_PRPMC2800=y
# CONFIG_PPC_C2K is not set
CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:19 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:13 2010
#
# CONFIG_PPC64 is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &numa_cpumask_lookup_table[node])
int of_node_to_nid(struct device_node *device);
FixupDAR:/* Entry point for dcbx workaround. */
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
+ andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
DO_8xx_CPU6(0x3780, r3)
mtspr SPRN_MD_EPN, r10
mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */
- cmplwi cr0, r11, 0x0800
- blt- 3f /* Branch if user space */
+ beq- 3f /* Branch if user space */
lis r11, (swapper_pg_dir-PAGE_OFFSET)@h
ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
*/
initial_mmu:
tlbia /* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
+/* Always pin the first 8 MB ITLB to prevent ITLB
+ misses while mucking around with SRR0/SRR1 in asm
+*/
lis r8, MI_RSV4I@h
ori r8, r8, 0x1c00
-#else
- li r8, 0
-#endif
+
mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
#ifdef CONFIG_PIN_TLB
list_for_each_entry(dev, &bus->devices, bus_list) {
struct dev_archdata *sd = &dev->dev.archdata;
+ /* Cardbus can call us to add new devices to a bus, so ignore
+ * those who are already fully discovered
+ */
+ if (dev->is_added)
+ continue;
+
/* Setup OF node pointer in archdata */
sd->of_node = pci_device_to_OF_node(dev);
}
EXPORT_SYMBOL(pcibios_fixup_bus);
+void __devinit pci_fixup_cardbus(struct pci_bus *bus)
+{
+ /* Now fixup devices on that bus */
+ pcibios_setup_bus_devices(bus);
+}
+
+
static int skip_isa_ioresource_align(struct pci_dev *dev)
{
if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) &&
if (rtas_node == NULL)
return -ENODEV;
- proc_create("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL,
+ proc_create("powerpc/rtas/progress", S_IRUGO|S_IWUSR, NULL,
&ppc_rtas_progress_operations);
- proc_create("ppc64/rtas/clock", S_IRUGO|S_IWUSR, NULL,
+ proc_create("powerpc/rtas/clock", S_IRUGO|S_IWUSR, NULL,
&ppc_rtas_clock_operations);
- proc_create("ppc64/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_poweron_operations);
- proc_create("ppc64/rtas/sensors", S_IRUGO, NULL,
+ proc_create("powerpc/rtas/sensors", S_IRUGO, NULL,
&ppc_rtas_sensors_operations);
- proc_create("ppc64/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_tone_freq_operations);
- proc_create("ppc64/rtas/volume", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/volume", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_tone_volume_operations);
- proc_create("ppc64/rtas/rmo_buffer", S_IRUSR, NULL,
+ proc_create("powerpc/rtas/rmo_buffer", S_IRUSR, NULL,
&ppc_rtas_rmo_buf_ops);
return 0;
}
if (smp_ops->cpu_die)
smp_ops->cpu_die(cpu);
}
+
+static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+ mutex_lock(&powerpc_cpu_hotplug_driver_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+ mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
+}
#endif
lis r4,0x1000
1: addic. r4,r4,-0x1000
tlbie r4
- blt 1b
+ bgt 1b
sync
/* restore the MSR and turn on the MMU */
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
+static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
+ int shift)
+{
+ uint64_t tmp = ((uint64_t)ticks) << shift;
+
+ do_div(tmp, nsec);
+ return tmp;
+}
+
static void __init setup_clockevent_multiplier(unsigned long hz)
{
u64 mult, shift = 32;
while (1) {
- mult = div_sc(hz, NSEC_PER_SEC, shift);
+ mult = div_sc64(hz, NSEC_PER_SEC, shift);
if (mult && (mult >> 32UL) == 0UL)
break;
config KVM_EXIT_TIMING
bool "Detailed exit timing"
- depends on KVM
+ depends on KVM_440 || KVM_E500
---help---
Calculate elapsed time for every exit/enter cycle. A per-vcpu
report is available in debugfs kvm/vm#_vcpu#_timing.
{
u64 rb = 0, rs = 0;
+ /*
+ * According to Book3 2.01 mtsrin is implemented as:
+ *
+ * The SLB entry specified by (RB)32:35 is loaded from register
+ * RS, as follows.
+ *
+ * SLBE Bit Source SLB Field
+ *
+ * 0:31 0x0000_0000 ESID-0:31
+ * 32:35 (RB)32:35 ESID-32:35
+ * 36 0b1 V
+ * 37:61 0x00_0000|| 0b0 VSID-0:24
+ * 62:88 (RS)37:63 VSID-25:51
+ * 89:91 (RS)33:35 Ks Kp N
+ * 92 (RS)36 L ((RS)36 must be 0b0)
+ * 93 0b0 C
+ */
+
+ dprintk("KVM MMU: mtsrin(0x%x, 0x%lx)\n", srnum, value);
+
/* ESID = srnum */
rb |= (srnum & 0xf) << 28;
/* Set the valid bit */
/* VSID = VSID */
rs |= (value & 0xfffffff) << 12;
/* flags = flags */
- rs |= ((value >> 27) & 0xf) << 9;
+ rs |= ((value >> 28) & 0x7) << 9;
kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb);
}
if (current->personality & ADDR_COMPAT_LAYOUT)
return 1;
- if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
+ if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
return 1;
return sysctl_legacy_va_layout;
static inline unsigned long mmap_base(void)
{
- unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long gap = rlimit(RLIMIT_STACK);
if (gap < MIN_GAP)
gap = MIN_GAP;
*/
static int spufs_dump_write(struct file *file, const void *addr, int nr, loff_t *foffset)
{
- unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
+ unsigned long limit = rlimit(RLIMIT_CORE);
ssize_t written;
if (*foffset + nr > limit)
struct vio_waitevent we;
int ret;
+ init_completion(&we.com);
+
ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 2);
if (ret) {
printk(KERN_WARNING "get_viotape_info: "
int dlpar_attach_node(struct device_node *dn)
{
+#ifdef CONFIG_PROC_DEVICETREE
struct proc_dir_entry *ent;
+#endif
int rc;
of_node_set_flag(dn, OF_DYNAMIC);
int dlpar_detach_node(struct device_node *dn)
{
+#ifdef CONFIG_PROC_DEVICETREE
struct device_node *parent = dn->parent;
struct property *prop = dn->properties;
-#ifdef CONFIG_PROC_DEVICETREE
while (prop) {
remove_proc_entry(prop->name, dn->pde);
prop = prop->next;
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
-
-void cpu_hotplug_driver_lock(void)
-__acquires(pseries_cpu_hotplug_mutex)
-{
- mutex_lock(&pseries_cpu_hotplug_mutex);
-}
-
-void cpu_hotplug_driver_unlock(void)
-__releases(pseries_cpu_hotplug_mutex)
-{
- mutex_unlock(&pseries_cpu_hotplug_mutex);
-}
-
static int dlpar_online_cpu(struct device_node *dn)
{
int rc = 0;
/* Interface to generic irq subsystem */
#ifdef CONFIG_SMP
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+ unsigned int strict_check)
{
int server;
/* For the moment only implement delivery to all cpus or one cpu */
- cpumask_t cpumask;
cpumask_t tmp = CPU_MASK_NONE;
- cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
if (!distribute_irqs)
return default_server;
return default_server;
}
#else
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+ unsigned int strict_check)
{
return default_server;
}
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
- server = get_irq_server(virq, 0);
+ server = get_irq_server(virq, *(irq_to_desc(virq)->affinity), 0);
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
DEFAULT_PRIORITY);
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- irq_server = get_irq_server(virq, 1);
+ irq_server = get_irq_server(virq, *cpumask, 1);
if (irq_server == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Tue Sep 22 17:43:13 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 09:03:07 2010
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
+CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_LOCK=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_INLINE_READ_TRYLOCK=y
+CONFIG_ARCH_INLINE_READ_LOCK=y
+CONFIG_ARCH_INLINE_READ_LOCK_BH=y
+CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_READ_UNLOCK=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y
+CONFIG_ARCH_INLINE_WRITE_LOCK=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_OSD is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_PPS is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEMSTICK is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_KMEMCHECK is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
unreachable(); \
} while (0)
+#define __WARN() do { \
+ __EMIT_BUG(BUGFLAG_WARNING); \
+} while (0)
+
#define WARN_ON(x) ({ \
int __ret_warn_on = !!(x); \
if (__builtin_constant_p(__ret_warn_on)) { \
/*
- * include/asm-s390/irqflags.h
- *
- * Copyright (C) IBM Corp. 2006
- * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Copyright IBM Corp. 2006,2010
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#ifndef __ASM_IRQFLAGS_H
#define __ASM_IRQFLAGS_H
-#ifdef __KERNEL__
+#include <linux/types.h>
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
/* For spinlocks etc */
#define raw_local_irq_save(x) ((x) = raw_local_irq_disable())
-#endif /* __KERNEL__ */
#endif /* __ASM_IRQFLAGS_H */
-/*
- * include/asm-s390/param.h
- *
- * S390 version
- *
- * Derived from "include/asm-i386/param.h"
- */
-
#ifndef _ASMS390_PARAM_H
#define _ASMS390_PARAM_H
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
+#include <asm-generic/param.h>
-#endif
+#endif /* _ASMS390_PARAM_H */
#ifndef __SIGP__
#define __SIGP__
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
+#include <asm/system.h>
/* get real cpu address from logical cpu number */
-extern volatile int __cpu_logical_map[];
+extern int __cpu_logical_map[];
+
+static inline int cpu_logical_map(int cpu)
+{
+#ifdef CONFIG_SMP
+ return __cpu_logical_map[cpu];
+#else
+ return stap();
+#endif
+}
typedef enum
{
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode)
- : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+ : "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
"a" (order_code) : "cc" , "memory");
return ccode;
}
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode)
- : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+ : "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
"a" (order_code) : "cc" , "memory");
return ccode;
}
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode), "+d" (reg1)
- : "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+ : "d" (cpu_logical_map(cpu_addr)), "a" (order_code)
: "cc" , "memory");
*statusptr = reg1;
return ccode;
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */
-#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
-#define TIF_31BIT 18 /* 32bit process */
-#define TIF_MEMDIE 19
-#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */
-#define TIF_FREEZE 21 /* thread is freezing for suspend */
+#define TIF_31BIT 17 /* 32bit process */
+#define TIF_MEMDIE 18
+#define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */
+#define TIF_FREEZE 20 /* thread is freezing for suspend */
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define __NR_pwritev 329
#define __NR_rt_tgsigqueueinfo 330
#define __NR_perf_event_open 331
-#define __NR_recvmmsg 332
-#define NR_syscalls 333
+#define NR_syscalls 332
/*
* There are some system calls that are not present on 64 bit, some
#define __IGNORE_migrate_pages
#define __IGNORE_move_pages
+/* Ignore system calls that are also reachable via sys_socket */
+#define __IGNORE_recvmmsg
+
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_SYS_ALARM
*/
struct mmap_arg_struct_emu31 {
- u32 addr;
- u32 len;
- u32 prot;
- u32 flags;
- u32 fd;
- u32 offset;
+ compat_ulong_t addr;
+ compat_ulong_t len;
+ compat_ulong_t prot;
+ compat_ulong_t flags;
+ compat_ulong_t fd;
+ compat_ulong_t offset;
};
-asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
- int error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
-
- error = -EINVAL;
+ return -EFAULT;
if (a.offset & ~PAGE_MASK)
- goto out;
-
- error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
- a.offset >> PAGE_SHIFT);
-out:
- return error;
+ return -EINVAL;
+ a.addr = (unsigned long) compat_ptr(a.addr);
+ return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+ a.offset >> PAGE_SHIFT);
}
-asmlinkage long
-sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
- int error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
- error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
-out:
- return error;
+ return -EFAULT;
+ a.addr = (unsigned long) compat_ptr(a.addr);
+ return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
}
asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)
llgtr %r3,%r3 # compat_uptr_t *
llgtr %r4,%r4 # compat_uptr_t *
jg sys32_execve # branch to system call
-
- .globl compat_sys_recvmmsg_wrapper
-compat_sys_recvmmsg_wrapper:
- lgfr %r2,%r2 # int
- llgtr %r3,%r3 # struct compat_mmsghdr *
- llgfr %r4,%r4 # unsigned int
- llgfr %r5,%r5 # unsigned int
- llgtr %r6,%r6 # struct compat_timespec *
- jg compat_sys_recvmmsg
mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
+ lm %r2,%r6,SP_R2(%r15) # load svc arguments
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
b BASED(sysc_do_svc)
mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
+ lmg %r2,%r6,SP_R2(%r15) # load svc arguments
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
j sysc_do_svc
void flush_thread(void)
{
- clear_used_math();
- clear_tsk_thread_flag(current, TIF_USEDFPU);
}
void release_thread(struct task_struct *dead_task)
p->thread.mm_segment = get_fs();
/* Don't copy debug registers */
memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+ clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
/* Initialize per thread user and system timer values */
ti = task_thread_info(p);
ti->user_timer = 0;
{
struct pt_regs *regs;
per_struct *per_info;
+ per_cr_words cr_words;
regs = task_pt_regs(task);
per_info = (per_struct *) &task->thread.per_info;
per_info->control_regs.bits.storage_alt_space_ctl = 1;
else
per_info->control_regs.bits.storage_alt_space_ctl = 0;
+
+ if (task == current) {
+ __ctl_store(cr_words, 9, 11);
+ if (memcmp(&cr_words, &per_info->control_regs.words,
+ sizeof(cr_words)) != 0)
+ __ctl_load(per_info->control_regs.words, 9, 11);
+ }
}
void user_enable_single_step(struct task_struct *task)
char elf_platform[ELF_PLATFORM_SIZE];
struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
-volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
int __initdata memory_end_set;
unsigned long __initdata memory_end;
*/
get_cpu_id(&S390_lowcore.cpu_id);
- /*
- * Force FPU initialization:
- */
- clear_thread_flag(TIF_USEDFPU);
- clear_used_math();
-
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
BUG_ON(current->mm);
setup_lowcore();
cpu_init();
- __cpu_logical_map[0] = stap();
s390_init_cpu_topology();
/*
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
- /*
- * If we would have taken a single-step trap
- * for a normal instruction, act like we took
- * one for the handler setup.
- */
- if (current->thread.per_info.single_step)
- set_thread_flag(TIF_SINGLE_STEP);
-
/*
* Let tracing know that we've done the handler setup.
*/
tracehook_signal_handler(signr, &info, &ka, regs,
- test_thread_flag(TIF_SINGLE_STEP));
+ current->thread.per_info.single_step);
}
return;
}
#include <asm/cpu.h>
#include "entry.h"
+/* logical cpu to cpu address */
+int __cpu_logical_map[NR_CPUS];
+
static struct task_struct *current_set[NR_CPUS];
static u8 smp_cpu_type;
{
}
+void __init smp_setup_processor_id(void)
+{
+ S390_lowcore.cpu_nr = 0;
+ __cpu_logical_map[0] = stap();
+}
+
/*
* the frequency of the profiling timer can be changed
* by writing a multiplier value into /proc/profile.
SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
-SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper)
rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
for_each_present_cpu(lcpu) {
- if (__cpu_logical_map[lcpu] == rcpu) {
+ if (cpu_logical_map(lcpu) == rcpu) {
cpu_set(lcpu, core->mask);
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
return rc2;
}
-static const intercept_handler_t intercept_funcs[0x48 >> 2] = {
+static const intercept_handler_t intercept_funcs[] = {
[0x00 >> 2] = handle_noop,
[0x04 >> 2] = handle_instruction,
[0x08 >> 2] = handle_prog,
intercept_handler_t func;
u8 code = vcpu->arch.sie_block->icptcode;
- if (code & 3 || code > 0x48)
+ if (code & 3 || (code >> 2) >= ARRAY_SIZE(intercept_funcs))
return -ENOTSUPP;
func = intercept_funcs[code >> 2];
if (func)
{
if (MACHINE_HAS_DIAG9C)
asm volatile("diag %0,0,0x9c"
- : : "d" (__cpu_logical_map[cpu]));
+ : : "d" (cpu_logical_map(cpu)));
else
_raw_yield();
}
static inline unsigned long mmap_base(void)
{
- unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long gap = rlimit(RLIMIT_STACK);
if (gap < MIN_GAP)
gap = MIN_GAP;
#endif
return sysctl_legacy_va_layout ||
(current->personality & ADDR_COMPAT_LAYOUT) ||
- current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY;
+ rlimit(RLIMIT_STACK) == RLIM_INFINITY;
}
#ifndef CONFIG_64BIT
ram << (PAGE_SHIFT-10), codesize >> 10,
reservedpages << (PAGE_SHIFT-10), datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
}
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
- default "27000000" if CPU_SUBTYPE_SH7343
+ depends on SH_CLK_CPG_LEGACY
default "31250000" if CPU_SUBTYPE_SH7619
- default "32000000" if CPU_SUBTYPE_SH7722
- default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
- CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
- CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
- CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \
- CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724
+ default "33333333" if CPU_SUBTYPE_SH7770 || \
+ CPU_SUBTYPE_SH7760 || \
+ CPU_SUBTYPE_SH7705 || \
+ CPU_SUBTYPE_SH7203 || \
+ CPU_SUBTYPE_SH7206 || \
+ CPU_SUBTYPE_SH7263 || \
+ CPU_SUBTYPE_MXG || \
+ CPU_SUBTYPE_SH7786
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
{
I2C_BOARD_INFO("r2025sd", 0x32),
},
+ {
+ I2C_BOARD_INFO("lis3lv02d", 0x1c),
+ .irq = 33,
+ }
};
/* KEYSC */
gpio_direction_output(GPIO_PTU0, 0);
mdelay(20);
+ /* enable motion sensor */
+ gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+ gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
/* enable I2C device */
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
while (t--) {
if (!ctrl_inw(EEPROM_STAT))
return 1;
- cpu_relax();
+ udelay(1);
}
printk(KERN_ERR "ms7724se can not access to eeprom\n");
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Fri Sep 25 11:22:50 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:10:59 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
+# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH_SCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia drivers
#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_IR_I2C=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_SOC_CAMERA_OV772X=y
+# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
+# CONFIG_MMC_TMIO is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:21:54 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:14:50 2010
#
CONFIG_SUPERH=y
# CONFIG_SUPERH32 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00400000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
CONFIG_SH64_SR_WATCH=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:56:07 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:17:35 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_NR_DMA_CHANNELS=9
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
#
CONFIG_MAPLE=y
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:56:41 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:18:17 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# CONFIG_SH_TIMER_TMU is not set
CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:45:39 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:20:36 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH_SCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia drivers
#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_IR_I2C=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set
#
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
+# CONFIG_MMC_TMIO is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:57:13 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:24:26 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_NLS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:57:30 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:24:44 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=8
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# CONFIG_SH_DMABRG is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x02000000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:58:18 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:26:55 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 17:59:45 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:30:31 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=6
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:01:48 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:31:09 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# CONFIG_SH_TIMER_TMU is not set
CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=y
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Fri Sep 25 11:54:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:32:55 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# CONFIG_SH_TIMER_TMU is not set
CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_CDC_COMPOSITE=y
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TMIO is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:05:49 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:35:31 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_OVERWRITE is not set
# CONFIG_CMDLINE_EXTEND is not set
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:09:59 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:37:01 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:10:49 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:37:42 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=6
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:14:35 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:40:41 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=6
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:17:41 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:41:41 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia drivers
#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_IR_I2C=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
+# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
-CONFIG_USB_G_SERIAL=y
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
-CONFIG_EARLY_PRINTK=y
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:20:53 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 11:45:25 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=6
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:24:31 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:16:13 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
-# CONFIG_EARLY_PRINTK is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:29:23 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:19:35 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# Timer and clock configuration
#
CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_4KSTACKS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:34:29 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:23:12 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:35:04 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:23:54 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_REGULATOR=y
#
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
+# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:36:25 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:25:36 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00010000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_SH_MSIOF is not set
CONFIG_SPI_SH_SCI=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
-CONFIG_EARLY_PRINTK=y
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:39:48 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:26:39 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00010000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_SH_MSIOF is not set
CONFIG_SPI_SH_SCI=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
-CONFIG_EARLY_PRINTK=y
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:40:25 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:27:20 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=12
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:45:28 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:30:00 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:46:55 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:30:41 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
-CONFIG_EARLY_PRINTK=y
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:50:05 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:34:15 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:50:52 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:34:37 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:53:32 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:44:56 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:57:11 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:46:58 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:57:41 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:49:15 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Fri Sep 25 11:50:59 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 14:36:56 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=12
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH_SCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia drivers
#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_IR_I2C=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
+# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
CONFIG_SND_SOC_AD1836=m
CONFIG_SND_SOC_AD1938=m
CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC26=m
CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8711=m
+CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_MAX9877=m
+CONFIG_SND_SOC_TPA6130A2=m
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
+# CONFIG_MMC_TMIO is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 18:58:58 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 14:39:10 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_OVERWRITE is not set
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:01:41 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 14:39:56 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00010000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400"
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:03:59 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 14:40:32 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:07:14 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 14:41:25 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00004000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:11:49 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 14:43:04 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:14:00 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:03:45 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
#
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_PCLK_FREQ=41666666
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_BLK_DEV_HD is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:15:37 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:05:29 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TMIO is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:17:16 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:06:28 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
#
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_BLK_DEV_HD is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Fri Sep 25 11:39:20 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:07:40 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# Timer and clock configuration
#
CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=50000000
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_SCHEDSTATS=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_DWARF_UNWINDER=y
CONFIG_MCOUNT=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:23:18 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:09:09 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# Timer and clock configuration
#
CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=50000000
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:27:17 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:10:09 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-CONFIG_EARLY_PRINTK=y
# CONFIG_DWARF_UNWINDER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:29:26 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:10:45 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_LOCKBREAK=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_COHERENT=y
+# CONFIG_DMA_NONCOHERENT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_NUMA=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_SCHED_MC=y
#
# Cache configuration
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH_SCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:33:00 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:14:18 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=8
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_OVERWRITE is not set
# CONFIG_CMDLINE_EXTEND is not set
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:35:03 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:14:50 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_OVERWRITE is not set
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=1024
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:36:36 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:17:20 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# DMA support
#
-CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
+CONFIG_SH_DMA_API=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=8
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x009e0000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
# Bus options
#
CONFIG_PCI=y
-CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:42:33 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:18:53 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_CMT=y
CONFIG_SYS_SUPPORTS_TMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_NONCOHERENT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TMIO is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DWARF_UNWINDER is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 19:46:13 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 15:27:53 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_COHERENT=y
+# CONFIG_DMA_NONCOHERENT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
# CONFIG_NUMA is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# Bus options
#
CONFIG_PCI=y
-# CONFIG_SH_PCIDMA_NONCOHERENT is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia drivers
#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
# CONFIG_DAB is not set
#
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
-CONFIG_EARLY_PRINTK=y
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#ifndef __ASM_SH_TIMEX_H
#define __ASM_SH_TIMEX_H
+/*
+ * Only parts using the legacy CPG code for their clock framework
+ * implementation need to define their own Pclk value. If provided, this
+ * can be used for accurately setting CLOCK_TICK_RATE, otherwise we
+ * simply fall back on the i8253 PIT value.
+ */
+#ifdef CONFIG_SH_PCLK_FREQ
#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
+#else
+#define CLOCK_TICK_RATE 1193180
+#endif
#include <asm-generic/timex.h>
#define __NR_pwritev 334
#define __NR_rt_tgsigqueueinfo 335
#define __NR_perf_event_open 336
-#define __NR_recvmmsg 337
-#define NR_syscalls 338
+#define NR_syscalls 337
#ifdef __KERNEL__
+#define __IGNORE_recvmmsg
+
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
#define __NR_rt_tgsigqueueinfo 363
#define __NR_perf_event_open 364
#define __NR_recvmmsg 365
+#define __NR_accept4 366
#ifdef __KERNEL__
-#define NR_syscalls 366
+#define NR_syscalls 367
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
void flush_thread(void)
{
- /* Called by fs/exec.c (flush_old_exec) to remove traces of a
+ /* Called by fs/exec.c (setup_new_exec) to remove traces of a
* previously running executable. */
#ifdef CONFIG_SH_FPU
if (last_task_used_math == current) {
.long sys_pwritev
.long sys_rt_tgsigqueueinfo /* 335 */
.long sys_perf_event_open
- .long sys_recvmmsg
.long sys_rt_tgsigqueueinfo
.long sys_perf_event_open
.long sys_recvmmsg /* 365 */
+ .long sys_accept4
config PMB_ENABLE
bool "Support 32-bit physical addressing through PMB"
- depends on MMU && EXPERIMENTAL && CPU_SH4A
- default y
+ depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
help
If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy
config PMB
bool "PMB"
- depends on MMU && EXPERIMENTAL && CPU_SH4A
+ depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
help
If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy
config PMB_FIXED
bool "fixed PMB"
- depends on MMU && EXPERIMENTAL && CPU_SH4A
+ depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
select 32BIT
help
If this option is enabled, fixed PMB mappings are inherited
include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
@echo ' Generating $@'
$(Q)mkdir -p $(dir $@)
- $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
+ $(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
default 64 if SPARC64
config GENERIC_TIME
+ def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
bool
- default y if SPARC64
+ default y if SPARC32
config GENERIC_CMOS_UPDATE
bool
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Wed Sep 16 00:03:43 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 11 23:20:31 2010
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Tue Sep 15 17:06:03 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan 20 16:31:47 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
-CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_SMP=y
+CONFIG_EARLYFB=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
CONFIG_SECCOMP=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_SUNVDC=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
+# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_ULTRA45 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
#define ELF_PLATFORM (NULL)
#define SET_PERSONALITY(ex) \
-do { unsigned long new_flags = current_thread_info()->flags; \
- new_flags &= _TIF_32BIT; \
- if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
- new_flags |= _TIF_32BIT; \
+do { if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ set_thread_flag(TIF_32BIT); \
else \
- new_flags &= ~_TIF_32BIT; \
- if ((current_thread_info()->flags & _TIF_32BIT) \
- != new_flags) \
- set_thread_flag(TIF_ABI_PENDING); \
- else \
- clear_thread_flag(TIF_ABI_PENDING); \
+ clear_thread_flag(TIF_32BIT); \
/* flush_thread will update pgd cache */ \
if (personality(current->personality) != PER_LINUX32) \
set_personality(PER_LINUX | \
#include <asm/page.h> /* IO address mapping routines need this */
#include <asm/system.h>
-#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
static inline u32 flip_dword (u32 l)
{
#define phys_to_virt __va
#define ARCH_PFN_OFFSET (pfn_base)
-#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
#ifndef _ASMSPARC_PARAM_H
#define _ASMSPARC_PARAM_H
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
+#include <asm-generic/param.h>
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif
+#endif /* _ASMSPARC_PARAM_H */
#define TIF_SECCOMP 9 /* secure computing */
#define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */
#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */
-/* flag bit 11 is available */
/* NOTE: Thread flags >= 12 should be ones we have no interest
* in using in assembly, else we can't use the mask as
* an immediate value in instructions such as andcc.
*/
-#define TIF_ABI_PENDING 12
+/* flag bit 12 is available */
#define TIF_MEMDIE 13
#define TIF_POLLING_NRFLAG 14
#define TIF_FREEZE 15 /* is freezing for suspend */
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_FREEZE (1<<TIF_FREEZE)
typedef unsigned long cycles_t;
#define get_cycles() (0)
+extern u32 (*do_arch_gettimeoffset)(void);
#endif
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &numa_cpumask_lookup_table[node])
struct pci_bus;
#ifdef CONFIG_PCI
if (unlikely(sz != -1 && sz < n)) {
copy_from_user_overflow();
- return -EFAULT;
+ return n;
}
if (n && __access_ok((unsigned long) from, n))
static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long size)
{
- unsigned long ret = (unsigned long) -EFAULT;
int sz = __compiletime_object_size(to);
+ unsigned long ret = size;
if (likely(sz == -1 || sz >= size)) {
ret = ___copy_from_user(to, from, size);
p->leds_resource.start = (unsigned long)
(p->clock_regs + CLOCK_CTRL);
- p->leds_resource.end = p->leds_resource.end;
+ p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-clockboard-leds";
if (!p->central) {
p->leds_resource.start = (unsigned long)
(p->pregs + FHC_PREGS_CTRL);
- p->leds_resource.end = p->leds_resource.end;
+ p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-fhc-leds";
};
#ifdef CONFIG_SMP
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity)
{
cpumask_t mask;
int cpuid;
- cpumask_copy(&mask, irq_desc[virt_irq].affinity);
+ cpumask_copy(&mask, affinity);
if (cpus_equal(mask, cpu_online_map)) {
cpuid = map_to_cpu(virt_irq);
} else {
return cpuid;
}
#else
-static int irq_choose_cpu(unsigned int virt_irq)
-{
- return real_hard_smp_processor_id();
-}
+#define irq_choose_cpu(virt_irq, affinity) \
+ real_hard_smp_processor_id()
#endif
static void sun4u_irq_enable(unsigned int virt_irq)
unsigned long cpuid, imap, val;
unsigned int tid;
- cpuid = irq_choose_cpu(virt_irq);
+ cpuid = irq_choose_cpu(virt_irq,
+ irq_desc[virt_irq].affinity);
imap = data->imap;
tid = sun4u_compute_tid(imap, cpuid);
static int sun4u_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
- sun4u_irq_enable(virt_irq);
+ struct irq_handler_data *data = get_irq_chip_data(virt_irq);
+
+ if (likely(data)) {
+ unsigned long cpuid, imap, val;
+ unsigned int tid;
+
+ cpuid = irq_choose_cpu(virt_irq, mask);
+ imap = data->imap;
+
+ tid = sun4u_compute_tid(imap, cpuid);
+
+ val = upa_readq(imap);
+ val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS |
+ IMAP_AID_SAFARI | IMAP_NID_SAFARI);
+ val |= tid | IMAP_VALID;
+ upa_writeq(val, imap);
+ upa_writeq(ICLR_IDLE, data->iclr);
+ }
return 0;
}
static void sun4v_irq_enable(unsigned int virt_irq)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
- unsigned long cpuid = irq_choose_cpu(virt_irq);
+ unsigned long cpuid = irq_choose_cpu(virt_irq,
+ irq_desc[virt_irq].affinity);
int err;
err = sun4v_intr_settarget(ino, cpuid);
const struct cpumask *mask)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
- unsigned long cpuid = irq_choose_cpu(virt_irq);
+ unsigned long cpuid = irq_choose_cpu(virt_irq, mask);
int err;
err = sun4v_intr_settarget(ino, cpuid);
unsigned long cpuid, dev_handle, dev_ino;
int err;
- cpuid = irq_choose_cpu(virt_irq);
+ cpuid = irq_choose_cpu(virt_irq, irq_desc[virt_irq].affinity);
dev_handle = virt_irq_table[virt_irq].dev_handle;
dev_ino = virt_irq_table[virt_irq].dev_ino;
unsigned long cpuid, dev_handle, dev_ino;
int err;
- cpuid = irq_choose_cpu(virt_irq);
+ cpuid = irq_choose_cpu(virt_irq, mask);
dev_handle = virt_irq_table[virt_irq].dev_handle;
dev_ino = virt_irq_table[virt_irq].dev_ino;
int cpu = smp_processor_id();
clear_softint(1 << irq);
- pcr_ops->write(PCR_PIC_PRIV);
local_cpu_data().__nmi_count++;
if (notify_die(DIE_NMI, "nmi", regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
touched = 1;
+ else
+ pcr_ops->write(PCR_PIC_PRIV);
sum = kstat_irqs_cpu(0, cpu);
if (__get_cpu_var(nmi_touch)) {
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/pcic.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
volatile int pcic_speculative;
volatile int pcic_trapped;
-static void pci_do_gettimeofday(struct timeval *tv);
-static int pci_do_settimeofday(struct timespec *tv);
#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
#define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */
#define TICK_TIMER_LIMIT ((100*1000000/4)/100)
+u32 pci_gettimeoffset(void)
+{
+ /*
+ * We divide all by 100
+ * to have microsecond resolution and to avoid overflow
+ */
+ unsigned long count =
+ readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
+ count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
+ return count * 1000;
+}
+
+
void __init pci_time_init(void)
{
struct linux_pcic *pcic = &pcic0;
unsigned long v;
int timer_irq, irq;
- /* A hack until do_gettimeofday prototype is moved to arch specific headers
- and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
- ((unsigned int *)do_gettimeofday)[0] =
- 0x10800000 | ((((unsigned long)pci_do_gettimeofday -
- (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
- ((unsigned int *)do_gettimeofday)[1] = 0x01000000;
- BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
+ do_arch_gettimeoffset = pci_gettimeoffset;
+
btfixup();
writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
local_irq_enable();
}
-static inline unsigned long do_gettimeoffset(void)
-{
- /*
- * We divide all by 100
- * to have microsecond resolution and to avoid overflow
- */
- unsigned long count =
- readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
- count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
- return count;
-}
-
-static void pci_do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-static int pci_do_settimeofday(struct timespec *tv)
-{
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- tv->tv_nsec -= 1000 * do_gettimeoffset();
- while (tv->tv_nsec < 0) {
- tv->tv_nsec += NSEC_PER_SEC;
- tv->tv_sec--;
- }
-
- wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
- wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec;
-
- if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
- wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
- wall_to_monotonic.tv_sec++;
- }
- if (wall_to_monotonic.tv_nsec < 0) {
- wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
- wall_to_monotonic.tv_sec--;
- }
-
- xtime.tv_sec = tv->tv_sec;
- xtime.tv_nsec = tv->tv_nsec;
- ntp_clear();
- return 0;
-}
#if 0
static void watchdog_reset() {
/* Performance event support for sparc64.
*
- * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2009, 2010 David S. Miller <davem@davemloft.net>
*
* This code is based almost entirely upon the x86 perf event
* code, which is:
#include <linux/kdebug.h>
#include <linux/mutex.h>
+#include <asm/stacktrace.h>
#include <asm/cpudata.h>
+#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <asm/nmi.h>
#include <asm/pcr.h>
+#include "kstack.h"
+
/* Sparc64 chips have two performance counters, 32-bits each, with
* overflow interrupts generated on transition from 0xffffffff to 0.
* The counters are accessed in one go using a 64-bit register.
#define PIC_UPPER_INDEX 0
#define PIC_LOWER_INDEX 1
+#define PIC_NO_INDEX -1
struct cpu_hw_events {
- struct perf_event *events[MAX_HWEVENTS];
- unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
- unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+ /* Number of events currently scheduled onto this cpu.
+ * This tells how many entries in the arrays below
+ * are valid.
+ */
+ int n_events;
+
+ /* Number of new events added since the last hw_perf_disable().
+ * This works because the perf event layer always adds new
+ * events inside of a perf_{disable,enable}() sequence.
+ */
+ int n_added;
+
+ /* Array of events current scheduled on this cpu. */
+ struct perf_event *event[MAX_HWEVENTS];
+
+ /* Array of encoded longs, specifying the %pcr register
+ * encoding and the mask of PIC counters this even can
+ * be scheduled on. See perf_event_encode() et al.
+ */
+ unsigned long events[MAX_HWEVENTS];
+
+ /* The current counter index assigned to an event. When the
+ * event hasn't been programmed into the cpu yet, this will
+ * hold PIC_NO_INDEX. The event->hw.idx value tells us where
+ * we ought to schedule the event.
+ */
+ int current_idx[MAX_HWEVENTS];
+
+ /* Software copy of %pcr register on this cpu. */
u64 pcr;
+
+ /* Enabled/disable state. */
int enabled;
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
+/* An event map describes the characteristics of a performance
+ * counter event. In particular it gives the encoding as well as
+ * a mask telling which counters the event can be measured on.
+ */
struct perf_event_map {
u16 encoding;
u8 pic_mask;
#define PIC_LOWER 0x02
};
+/* Encode a perf_event_map entry into a long. */
static unsigned long perf_event_encode(const struct perf_event_map *pmap)
{
return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask;
}
-static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk)
+static u8 perf_event_get_msk(unsigned long val)
{
- *msk = val & 0xff;
- *enc = val >> 16;
+ return val & 0xff;
+}
+
+static u64 perf_event_get_enc(unsigned long val)
+{
+ return val >> 16;
}
#define C(x) PERF_COUNT_HW_CACHE_##x
pcr_ops->write(cpuc->pcr);
}
-void hw_perf_enable(void)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- u64 val;
- int i;
-
- if (cpuc->enabled)
- return;
-
- cpuc->enabled = 1;
- barrier();
-
- val = cpuc->pcr;
-
- for (i = 0; i < MAX_HWEVENTS; i++) {
- struct perf_event *cp = cpuc->events[i];
- struct hw_perf_event *hwc;
-
- if (!cp)
- continue;
- hwc = &cp->hw;
- val |= hwc->config_base;
- }
-
- cpuc->pcr = val;
-
- pcr_ops->write(cpuc->pcr);
-}
-
-void hw_perf_disable(void)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- u64 val;
-
- if (!cpuc->enabled)
- return;
-
- cpuc->enabled = 0;
-
- val = cpuc->pcr;
- val &= ~(PCR_UTRACE | PCR_STRACE |
- sparc_pmu->hv_bit | sparc_pmu->irq_bit);
- cpuc->pcr = val;
-
- pcr_ops->write(cpuc->pcr);
-}
-
static u32 read_pmc(int idx)
{
u64 val;
write_pic(pic);
}
+static u64 sparc_perf_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc, int idx)
+{
+ int shift = 64 - 32;
+ u64 prev_raw_count, new_raw_count;
+ s64 delta;
+
+again:
+ prev_raw_count = atomic64_read(&hwc->prev_count);
+ new_raw_count = read_pmc(idx);
+
+ if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = (new_raw_count << shift) - (prev_raw_count << shift);
+ delta >>= shift;
+
+ atomic64_add(delta, &event->count);
+ atomic64_sub(delta, &hwc->period_left);
+
+ return new_raw_count;
+}
+
static int sparc_perf_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
return ret;
}
-static int sparc_pmu_enable(struct perf_event *event)
+/* If performance event entries have been added, move existing
+ * events around (if necessary) and then assign new entries to
+ * counters.
+ */
+static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
+ int i;
- if (test_and_set_bit(idx, cpuc->used_mask))
- return -EAGAIN;
+ if (!cpuc->n_added)
+ goto out;
- sparc_pmu_disable_event(cpuc, hwc, idx);
+ /* Read in the counters which are moving. */
+ for (i = 0; i < cpuc->n_events; i++) {
+ struct perf_event *cp = cpuc->event[i];
- cpuc->events[idx] = event;
- set_bit(idx, cpuc->active_mask);
+ if (cpuc->current_idx[i] != PIC_NO_INDEX &&
+ cpuc->current_idx[i] != cp->hw.idx) {
+ sparc_perf_event_update(cp, &cp->hw,
+ cpuc->current_idx[i]);
+ cpuc->current_idx[i] = PIC_NO_INDEX;
+ }
+ }
- sparc_perf_event_set_period(event, hwc, idx);
- sparc_pmu_enable_event(cpuc, hwc, idx);
- perf_event_update_userpage(event);
- return 0;
+ /* Assign to counters all unassigned events. */
+ for (i = 0; i < cpuc->n_events; i++) {
+ struct perf_event *cp = cpuc->event[i];
+ struct hw_perf_event *hwc = &cp->hw;
+ int idx = hwc->idx;
+ u64 enc;
+
+ if (cpuc->current_idx[i] != PIC_NO_INDEX)
+ continue;
+
+ sparc_perf_event_set_period(cp, hwc, idx);
+ cpuc->current_idx[i] = idx;
+
+ enc = perf_event_get_enc(cpuc->events[i]);
+ pcr |= event_encoding(enc, idx);
+ }
+out:
+ return pcr;
}
-static u64 sparc_perf_event_update(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
+void hw_perf_enable(void)
{
- int shift = 64 - 32;
- u64 prev_raw_count, new_raw_count;
- s64 delta;
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ u64 pcr;
-again:
- prev_raw_count = atomic64_read(&hwc->prev_count);
- new_raw_count = read_pmc(idx);
+ if (cpuc->enabled)
+ return;
- if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
+ cpuc->enabled = 1;
+ barrier();
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
+ pcr = cpuc->pcr;
+ if (!cpuc->n_events) {
+ pcr = 0;
+ } else {
+ pcr = maybe_change_configuration(cpuc, pcr);
- atomic64_add(delta, &event->count);
- atomic64_sub(delta, &hwc->period_left);
+ /* We require that all of the events have the same
+ * configuration, so just fetch the settings from the
+ * first entry.
+ */
+ cpuc->pcr = pcr | cpuc->event[0]->hw.config_base;
+ }
- return new_raw_count;
+ pcr_ops->write(cpuc->pcr);
+}
+
+void hw_perf_disable(void)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ u64 val;
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+ cpuc->n_added = 0;
+
+ val = cpuc->pcr;
+ val &= ~(PCR_UTRACE | PCR_STRACE |
+ sparc_pmu->hv_bit | sparc_pmu->irq_bit);
+ cpuc->pcr = val;
+
+ pcr_ops->write(cpuc->pcr);
}
static void sparc_pmu_disable(struct perf_event *event)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
+ unsigned long flags;
+ int i;
- clear_bit(idx, cpuc->active_mask);
- sparc_pmu_disable_event(cpuc, hwc, idx);
+ local_irq_save(flags);
+ perf_disable();
+
+ for (i = 0; i < cpuc->n_events; i++) {
+ if (event == cpuc->event[i]) {
+ int idx = cpuc->current_idx[i];
+
+ /* Shift remaining entries down into
+ * the existing slot.
+ */
+ while (++i < cpuc->n_events) {
+ cpuc->event[i - 1] = cpuc->event[i];
+ cpuc->events[i - 1] = cpuc->events[i];
+ cpuc->current_idx[i - 1] =
+ cpuc->current_idx[i];
+ }
+
+ /* Absorb the final count and turn off the
+ * event.
+ */
+ sparc_pmu_disable_event(cpuc, hwc, idx);
+ barrier();
+ sparc_perf_event_update(event, hwc, idx);
- barrier();
+ perf_event_update_userpage(event);
- sparc_perf_event_update(event, hwc, idx);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
+ cpuc->n_events--;
+ break;
+ }
+ }
- perf_event_update_userpage(event);
+ perf_enable();
+ local_irq_restore(flags);
+}
+
+static int active_event_index(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ int i;
+
+ for (i = 0; i < cpuc->n_events; i++) {
+ if (cpuc->event[i] == event)
+ break;
+ }
+ BUG_ON(i == cpuc->n_events);
+ return cpuc->current_idx[i];
}
static void sparc_pmu_read(struct perf_event *event)
{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int idx = active_event_index(cpuc, event);
struct hw_perf_event *hwc = &event->hw;
- sparc_perf_event_update(event, hwc, hwc->idx);
+ sparc_perf_event_update(event, hwc, idx);
}
static void sparc_pmu_unthrottle(struct perf_event *event)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int idx = active_event_index(cpuc, event);
struct hw_perf_event *hwc = &event->hw;
- sparc_pmu_enable_event(cpuc, hwc, hwc->idx);
+ sparc_pmu_enable_event(cpuc, hwc, idx);
}
static atomic_t active_events = ATOMIC_INIT(0);
/* Make sure all events can be scheduled into the hardware at
* the same time. This is simplified by the fact that we only
* need to support 2 simultaneous HW events.
+ *
+ * As a side effect, the evts[]->hw.idx values will be assigned
+ * on success. These are pending indexes. When the events are
+ * actually programmed into the chip, these values will propagate
+ * to the per-cpu cpuc->current_idx[] slots, see the code in
+ * maybe_change_configuration() for details.
*/
-static int sparc_check_constraints(unsigned long *events, int n_ev)
+static int sparc_check_constraints(struct perf_event **evts,
+ unsigned long *events, int n_ev)
{
- if (n_ev <= perf_max_events) {
- u8 msk1, msk2;
- u16 dummy;
-
- if (n_ev == 1)
- return 0;
- BUG_ON(n_ev != 2);
- perf_event_decode(events[0], &dummy, &msk1);
- perf_event_decode(events[1], &dummy, &msk2);
-
- /* If both events can go on any counter, OK. */
- if (msk1 == (PIC_UPPER | PIC_LOWER) &&
- msk2 == (PIC_UPPER | PIC_LOWER))
- return 0;
-
- /* If one event is limited to a specific counter,
- * and the other can go on both, OK.
- */
- if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
- msk2 == (PIC_UPPER | PIC_LOWER))
- return 0;
- if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) &&
- msk1 == (PIC_UPPER | PIC_LOWER))
- return 0;
-
- /* If the events are fixed to different counters, OK. */
- if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) ||
- (msk1 == PIC_LOWER && msk2 == PIC_UPPER))
- return 0;
-
- /* Otherwise, there is a conflict. */
+ u8 msk0 = 0, msk1 = 0;
+ int idx0 = 0;
+
+ /* This case is possible when we are invoked from
+ * hw_perf_group_sched_in().
+ */
+ if (!n_ev)
+ return 0;
+
+ if (n_ev > perf_max_events)
+ return -1;
+
+ msk0 = perf_event_get_msk(events[0]);
+ if (n_ev == 1) {
+ if (msk0 & PIC_LOWER)
+ idx0 = 1;
+ goto success;
+ }
+ BUG_ON(n_ev != 2);
+ msk1 = perf_event_get_msk(events[1]);
+
+ /* If both events can go on any counter, OK. */
+ if (msk0 == (PIC_UPPER | PIC_LOWER) &&
+ msk1 == (PIC_UPPER | PIC_LOWER))
+ goto success;
+
+ /* If one event is limited to a specific counter,
+ * and the other can go on both, OK.
+ */
+ if ((msk0 == PIC_UPPER || msk0 == PIC_LOWER) &&
+ msk1 == (PIC_UPPER | PIC_LOWER)) {
+ if (msk0 & PIC_LOWER)
+ idx0 = 1;
+ goto success;
}
+ if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
+ msk0 == (PIC_UPPER | PIC_LOWER)) {
+ if (msk1 & PIC_UPPER)
+ idx0 = 1;
+ goto success;
+ }
+
+ /* If the events are fixed to different counters, OK. */
+ if ((msk0 == PIC_UPPER && msk1 == PIC_LOWER) ||
+ (msk0 == PIC_LOWER && msk1 == PIC_UPPER)) {
+ if (msk0 & PIC_LOWER)
+ idx0 = 1;
+ goto success;
+ }
+
+ /* Otherwise, there is a conflict. */
return -1;
+
+success:
+ evts[0]->hw.idx = idx0;
+ if (n_ev == 2)
+ evts[1]->hw.idx = idx0 ^ 1;
+ return 0;
}
static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
}
static int collect_events(struct perf_event *group, int max_count,
- struct perf_event *evts[], unsigned long *events)
+ struct perf_event *evts[], unsigned long *events,
+ int *current_idx)
{
struct perf_event *event;
int n = 0;
if (n >= max_count)
return -1;
evts[n] = group;
- events[n++] = group->hw.event_base;
+ events[n] = group->hw.event_base;
+ current_idx[n++] = PIC_NO_INDEX;
}
list_for_each_entry(event, &group->sibling_list, group_entry) {
if (!is_software_event(event) &&
if (n >= max_count)
return -1;
evts[n] = event;
- events[n++] = event->hw.event_base;
+ events[n] = event->hw.event_base;
+ current_idx[n++] = PIC_NO_INDEX;
}
}
return n;
}
+static void event_sched_in(struct perf_event *event, int cpu)
+{
+ event->state = PERF_EVENT_STATE_ACTIVE;
+ event->oncpu = cpu;
+ event->tstamp_running += event->ctx->time - event->tstamp_stopped;
+ if (is_software_event(event))
+ event->pmu->enable(event);
+}
+
+int hw_perf_group_sched_in(struct perf_event *group_leader,
+ struct perf_cpu_context *cpuctx,
+ struct perf_event_context *ctx, int cpu)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct perf_event *sub;
+ int n0, n;
+
+ if (!sparc_pmu)
+ return 0;
+
+ n0 = cpuc->n_events;
+ n = collect_events(group_leader, perf_max_events - n0,
+ &cpuc->event[n0], &cpuc->events[n0],
+ &cpuc->current_idx[n0]);
+ if (n < 0)
+ return -EAGAIN;
+ if (check_excludes(cpuc->event, n0, n))
+ return -EINVAL;
+ if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0))
+ return -EAGAIN;
+ cpuc->n_events = n0 + n;
+ cpuc->n_added += n;
+
+ cpuctx->active_oncpu += n;
+ n = 1;
+ event_sched_in(group_leader, cpu);
+ list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
+ if (sub->state != PERF_EVENT_STATE_OFF) {
+ event_sched_in(sub, cpu);
+ n++;
+ }
+ }
+ ctx->nr_active += n;
+
+ return 1;
+}
+
+static int sparc_pmu_enable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int n0, ret = -EAGAIN;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ perf_disable();
+
+ n0 = cpuc->n_events;
+ if (n0 >= perf_max_events)
+ goto out;
+
+ cpuc->event[n0] = event;
+ cpuc->events[n0] = event->hw.event_base;
+ cpuc->current_idx[n0] = PIC_NO_INDEX;
+
+ if (check_excludes(cpuc->event, n0, 1))
+ goto out;
+ if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1))
+ goto out;
+
+ cpuc->n_events++;
+ cpuc->n_added++;
+
+ ret = 0;
+out:
+ perf_enable();
+ local_irq_restore(flags);
+ return ret;
+}
+
static int __hw_perf_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
struct perf_event *evts[MAX_HWEVENTS];
struct hw_perf_event *hwc = &event->hw;
unsigned long events[MAX_HWEVENTS];
+ int current_idx_dmy[MAX_HWEVENTS];
const struct perf_event_map *pmap;
- u64 enc;
int n;
if (atomic_read(&nmi_active) < 0)
} else
return -EOPNOTSUPP;
- /* We save the enable bits in the config_base. So to
- * turn off sampling just write 'config', and to enable
- * things write 'config | config_base'.
- */
+ /* We save the enable bits in the config_base. */
hwc->config_base = sparc_pmu->irq_bit;
if (!attr->exclude_user)
hwc->config_base |= PCR_UTRACE;
hwc->event_base = perf_event_encode(pmap);
- enc = pmap->encoding;
-
n = 0;
if (event->group_leader != event) {
n = collect_events(event->group_leader,
perf_max_events - 1,
- evts, events);
+ evts, events, current_idx_dmy);
if (n < 0)
return -EINVAL;
}
if (check_excludes(evts, n, 1))
return -EINVAL;
- if (sparc_check_constraints(events, n + 1))
+ if (sparc_check_constraints(evts, events, n + 1))
return -EINVAL;
+ hwc->idx = PIC_NO_INDEX;
+
/* Try to do all error checking before this point, as unwinding
* state after grabbing the PMC is difficult.
*/
atomic64_set(&hwc->period_left, hwc->sample_period);
}
- if (pmap->pic_mask & PIC_UPPER) {
- hwc->idx = PIC_UPPER_INDEX;
- enc <<= sparc_pmu->upper_shift;
- } else {
- hwc->idx = PIC_LOWER_INDEX;
- enc <<= sparc_pmu->lower_shift;
- }
-
- hwc->config |= enc;
return 0;
}
struct perf_sample_data data;
struct cpu_hw_events *cpuc;
struct pt_regs *regs;
- int idx;
+ int i;
if (!atomic_read(&active_events))
return NOTIFY_DONE;
data.addr = 0;
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx < MAX_HWEVENTS; idx++) {
- struct perf_event *event = cpuc->events[idx];
+
+ /* If the PMU has the TOE IRQ enable bits, we need to do a
+ * dummy write to the %pcr to clear the overflow bits and thus
+ * the interrupt.
+ *
+ * Do this before we peek at the counters to determine
+ * overflow so we don't lose any events.
+ */
+ if (sparc_pmu->irq_bit)
+ pcr_ops->write(cpuc->pcr);
+
+ for (i = 0; i < cpuc->n_events; i++) {
+ struct perf_event *event = cpuc->event[i];
+ int idx = cpuc->current_idx[i];
struct hw_perf_event *hwc;
u64 val;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
hwc = &event->hw;
val = sparc_perf_event_update(event, hwc, idx);
if (val & (1ULL << 31))
pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
- /* All sparc64 PMUs currently have 2 events. But this simple
- * driver only supports one active event at a time.
- */
- perf_max_events = 1;
+ /* All sparc64 PMUs currently have 2 events. */
+ perf_max_events = 2;
register_die_notifier(&perf_event_nmi_notifier);
}
+
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+ if (entry->nr < PERF_MAX_STACK_DEPTH)
+ entry->ip[entry->nr++] = ip;
+}
+
+static void perf_callchain_kernel(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long ksp, fp;
+
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+ callchain_store(entry, regs->tpc);
+
+ ksp = regs->u_regs[UREG_I6];
+ fp = ksp + STACK_BIAS;
+ do {
+ struct sparc_stackf *sf;
+ struct pt_regs *regs;
+ unsigned long pc;
+
+ if (!kstack_valid(current_thread_info(), fp))
+ break;
+
+ sf = (struct sparc_stackf *) fp;
+ regs = (struct pt_regs *) (sf + 1);
+
+ if (kstack_is_trap_frame(current_thread_info(), regs)) {
+ if (user_mode(regs))
+ break;
+ pc = regs->tpc;
+ fp = regs->u_regs[UREG_I6] + STACK_BIAS;
+ } else {
+ pc = sf->callers_pc;
+ fp = (unsigned long)sf->fp + STACK_BIAS;
+ }
+ callchain_store(entry, pc);
+ } while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+static void perf_callchain_user_64(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long ufp;
+
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, regs->tpc);
+
+ ufp = regs->u_regs[UREG_I6] + STACK_BIAS;
+ do {
+ struct sparc_stackf *usf, sf;
+ unsigned long pc;
+
+ usf = (struct sparc_stackf *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+
+ pc = sf.callers_pc;
+ ufp = (unsigned long)sf.fp + STACK_BIAS;
+ callchain_store(entry, pc);
+ } while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+static void perf_callchain_user_32(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long ufp;
+
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, regs->tpc);
+
+ ufp = regs->u_regs[UREG_I6];
+ do {
+ struct sparc_stackf32 *usf, sf;
+ unsigned long pc;
+
+ usf = (struct sparc_stackf32 *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+
+ pc = sf.callers_pc;
+ ufp = (unsigned long)sf.fp;
+ callchain_store(entry, pc);
+ } while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+/* Like powerpc we can't get PMU interrupts within the PMU handler,
+ * so no need for seperate NMI and IRQ chains as on x86.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+ struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+ entry->nr = 0;
+ if (!user_mode(regs)) {
+ stack_trace_flush();
+ perf_callchain_kernel(regs, entry);
+ if (current->mm)
+ regs = task_pt_regs(current);
+ else
+ regs = NULL;
+ }
+ if (regs) {
+ flushw_user();
+ if (test_thread_flag(TIF_32BIT))
+ perf_callchain_user_32(regs, entry);
+ else
+ perf_callchain_user_64(regs, entry);
+ }
+ return entry;
+}
struct thread_info *t = current_thread_info();
struct mm_struct *mm;
- if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
- clear_ti_thread_flag(t, TIF_ABI_PENDING);
- if (test_ti_thread_flag(t, TIF_32BIT))
- clear_ti_thread_flag(t, TIF_32BIT);
- else
- set_ti_thread_flag(t, TIF_32BIT);
- }
-
mm = t->task->mm;
if (mm)
tsb_context_switch(mm);
void arch_pick_mmap_layout(struct mm_struct *mm)
{
unsigned long random_factor = 0UL;
+ unsigned long gap;
if (current->flags & PF_RANDOMIZE) {
random_factor = get_random_int();
* Fall back to the standard layout if the personality
* bit is set, or if the expected stack growth is unlimited:
*/
+ gap = rlimit(RLIMIT_STACK);
if (!test_thread_flag(TIF_32BIT) ||
(current->personality & ADDR_COMPAT_LAYOUT) ||
- current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY ||
+ gap == RLIM_INFINITY ||
sysctl_legacy_va_layout) {
mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
mm->get_unmapped_area = arch_get_unmapped_area;
} else {
/* We know it's 32-bit */
unsigned long task_size = STACK_TOP32;
- unsigned long gap;
- gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
if (gap < 128 * 1024 * 1024)
gap = 128 * 1024 * 1024;
if (gap > (task_size / 6 * 5))
#include <linux/platform_device.h>
#include <asm/oplib.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/system.h>
#include <asm/irq.h>
EXPORT_SYMBOL(rtc_lock);
static int set_rtc_mmss(unsigned long);
-static int sbus_do_settimeofday(struct timespec *tv);
unsigned long profile_pc(struct pt_regs *regs)
{
__volatile__ unsigned int *master_l10_counter;
+u32 (*do_arch_gettimeoffset)(void);
+
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
{
return of_register_driver(&clock_driver, &of_platform_bus_type);
}
-
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the RTC driver
* need to see the clock registers.
*/
fs_initcall(clock_init);
-static void __init sbus_time_init(void)
-{
-
- BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
- btfixup();
-
- sparc_init_timers(timer_interrupt);
-}
-
-void __init time_init(void)
-{
-#ifdef CONFIG_PCI
- extern void pci_time_init(void);
- if (pcic_present()) {
- pci_time_init();
- return;
- }
-#endif
- sbus_time_init();
-}
-static inline unsigned long do_gettimeoffset(void)
+u32 sbus_do_gettimeoffset(void)
{
unsigned long val = *master_l10_counter;
unsigned long usec = (val >> 10) & 0x1fffff;
if (val & 0x80000000)
usec += 1000000 / HZ;
- return usec;
+ return usec * 1000;
}
-/* Ok, my cute asm atomicity trick doesn't work anymore.
- * There are just too many variables that need to be protected
- * now (both members of xtime, et al.)
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
+u32 arch_gettimeoffset(void)
{
- int ret;
-
- write_seqlock_irq(&xtime_lock);
- ret = bus_do_settimeofday(tv);
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return ret;
+ if (unlikely(!do_arch_gettimeoffset))
+ return 0;
+ return do_arch_gettimeoffset();
}
-EXPORT_SYMBOL(do_settimeofday);
-
-static int sbus_do_settimeofday(struct timespec *tv)
+static void __init sbus_time_init(void)
{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
+ do_arch_gettimeoffset = sbus_do_gettimeoffset;
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * do_gettimeoffset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+ btfixup();
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+ sparc_init_timers(timer_interrupt);
+}
- ntp_clear();
- return 0;
+void __init time_init(void)
+{
+#ifdef CONFIG_PCI
+ extern void pci_time_init(void);
+ if (pcic_present()) {
+ pci_time_init();
+ return;
+ }
+#endif
+ sbus_time_init();
}
+
static int set_rtc_mmss(unsigned long secs)
{
struct rtc_device *rtc = rtc_class_open("rtc0");
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kdebug.h>
if (in_atomic() || !mm)
goto no_context;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
down_read(&mm->mmap_sem);
/*
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
- else
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
current->min_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
return;
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
if (in_atomic() || !mm)
goto intr_or_no_mm;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
if (!down_read_trylock(&mm->mmap_sem)) {
if ((regs->tstate & TSTATE_PRIV) &&
!search_exception_tables(regs->tpc)) {
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
- else
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
current->min_flt++;
-
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
mm_rss = get_mm_rss(mm);
void mconsole_proc(struct mc_request *req)
{
struct nameidata nd;
- struct file_system_type *proc;
- struct super_block *super;
+ struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt;
struct file *file;
int n, err;
char *ptr = req->request.data, *buf;
+ mm_segment_t old_fs = get_fs();
ptr += strlen("proc");
ptr = skip_spaces(ptr);
- proc = get_fs_type("proc");
- if (proc == NULL) {
- mconsole_reply(req, "procfs not registered", 1, 0);
+ err = vfs_path_lookup(mnt->mnt_root, mnt, ptr, LOOKUP_FOLLOW, &nd);
+ if (err) {
+ mconsole_reply(req, "Failed to look up file", 1, 0);
goto out;
}
- super = (*proc->get_sb)(proc, 0, NULL, NULL);
- put_filesystem(proc);
- if (super == NULL) {
- mconsole_reply(req, "Failed to get procfs superblock", 1, 0);
+ err = may_open(&nd.path, MAY_READ, FMODE_READ);
+ if (result) {
+ mconsole_reply(req, "Failed to open file", 1, 0);
+ path_put(&nd.path);
goto out;
}
- up_write(&super->s_umount);
-
- nd.path.dentry = super->s_root;
- nd.path.mnt = NULL;
- nd.flags = O_RDONLY + 1;
- nd.last_type = LAST_ROOT;
-
- /* START: it was experienced that the stability problems are closed
- * if commenting out these two calls + the below read cycle. To
- * make UML crash again, it was enough to readd either one.*/
- err = link_path_walk(ptr, &nd);
- if (err) {
- mconsole_reply(req, "Failed to look up file", 1, 0);
- goto out_kill;
- }
file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
current_cred());
+ err = PTR_ERR(file);
if (IS_ERR(file)) {
mconsole_reply(req, "Failed to open file", 1, 0);
- goto out_kill;
+ path_put(&nd.path);
+ goto out;
}
- /*END*/
buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (buf == NULL) {
goto out_fput;
}
- if ((file->f_op != NULL) && (file->f_op->read != NULL)) {
+ if (file->f_op->read) {
do {
- n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1,
- &file->f_pos);
+ loff_t pos;
+ set_fs(KERNEL_DS);
+ n = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
+ file_pos_write(file, pos);
+ set_fs(old_fs);
if (n >= 0) {
buf[n] = '\0';
mconsole_reply(req, buf, 0, (n > 0));
kfree(buf);
out_fput:
fput(file);
- out_kill:
- deactivate_super(super);
out: ;
}
#endif
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select HAVE_HW_BREAKPOINT
select PERF_EVENTS
select ANON_INODES
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-config X86_CPU_DEBUG
- tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
- ---help---
- If you select this option, this will provide various x86 CPUs
- information through debugfs.
-
choice
prompt "High Memory Support"
default HIGHMEM4G if !X86_NUMAQ
def_bool X86_64
depends on MEMORY_HOTPLUG
+config ILLEGAL_POINTER_VALUE
+ hex
+ default 0 if X86_32
+ default 0xdead000000000000 if X86_64
+
source "mm/Kconfig"
config HIGHPTE
config X86_CMPXCHG64
def_bool y
- depends on !M386 && !M486
+ depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM
# this should be set for all -march=.. options where the compiler
# generates cmov.
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
+cflags-$(CONFIG_X86_32) := -march=i386
cflags-$(CONFIG_X86_64) := -mcmodel=small
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
$(call if_changed,bzip2)
$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,lzo)
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_LZMA) := lzma
+suffix-$(CONFIG_KERNEL_LZO) := lzo
quiet_cmd_mkpiggy = MKPIGGY $@
cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
#include "../../../../lib/decompress_unlzma.c"
#endif
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
static void scroll(void)
{
int i;
if (retval)
return retval;
- regs->cs = __USER32_CS;
- regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
- regs->r13 = regs->r14 = regs->r15 = 0;
-
/* OK, This is the point of no return */
set_personality(PER_LINUX);
set_thread_flag(TIF_IA32);
- clear_thread_flag(TIF_ABI_PENDING);
+
+ setup_new_exec(bprm);
+
+ regs->cs = __USER32_CS;
+ regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
+ regs->r13 = regs->r14 = regs->r15 = 0;
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
+++ /dev/null
-#ifndef _ASM_X86_CPU_DEBUG_H
-#define _ASM_X86_CPU_DEBUG_H
-
-/*
- * CPU x86 architecture debug
- *
- * Copyright(C) 2009 Jaswinder Singh Rajput
- */
-
-/* Register flags */
-enum cpu_debug_bit {
-/* Model Specific Registers (MSRs) */
- CPU_MC_BIT, /* Machine Check */
- CPU_MONITOR_BIT, /* Monitor */
- CPU_TIME_BIT, /* Time */
- CPU_PMC_BIT, /* Performance Monitor */
- CPU_PLATFORM_BIT, /* Platform */
- CPU_APIC_BIT, /* APIC */
- CPU_POWERON_BIT, /* Power-on */
- CPU_CONTROL_BIT, /* Control */
- CPU_FEATURES_BIT, /* Features control */
- CPU_LBRANCH_BIT, /* Last Branch */
- CPU_BIOS_BIT, /* BIOS */
- CPU_FREQ_BIT, /* Frequency */
- CPU_MTTR_BIT, /* MTRR */
- CPU_PERF_BIT, /* Performance */
- CPU_CACHE_BIT, /* Cache */
- CPU_SYSENTER_BIT, /* Sysenter */
- CPU_THERM_BIT, /* Thermal */
- CPU_MISC_BIT, /* Miscellaneous */
- CPU_DEBUG_BIT, /* Debug */
- CPU_PAT_BIT, /* PAT */
- CPU_VMX_BIT, /* VMX */
- CPU_CALL_BIT, /* System Call */
- CPU_BASE_BIT, /* BASE Address */
- CPU_VER_BIT, /* Version ID */
- CPU_CONF_BIT, /* Configuration */
- CPU_SMM_BIT, /* System mgmt mode */
- CPU_SVM_BIT, /*Secure Virtual Machine*/
- CPU_OSVM_BIT, /* OS-Visible Workaround*/
-/* Standard Registers */
- CPU_TSS_BIT, /* Task Stack Segment */
- CPU_CR_BIT, /* Control Registers */
- CPU_DT_BIT, /* Descriptor Table */
-/* End of Registers flags */
- CPU_REG_ALL_BIT, /* Select all Registers */
-};
-
-#define CPU_REG_ALL (~0) /* Select all Registers */
-
-#define CPU_MC (1 << CPU_MC_BIT)
-#define CPU_MONITOR (1 << CPU_MONITOR_BIT)
-#define CPU_TIME (1 << CPU_TIME_BIT)
-#define CPU_PMC (1 << CPU_PMC_BIT)
-#define CPU_PLATFORM (1 << CPU_PLATFORM_BIT)
-#define CPU_APIC (1 << CPU_APIC_BIT)
-#define CPU_POWERON (1 << CPU_POWERON_BIT)
-#define CPU_CONTROL (1 << CPU_CONTROL_BIT)
-#define CPU_FEATURES (1 << CPU_FEATURES_BIT)
-#define CPU_LBRANCH (1 << CPU_LBRANCH_BIT)
-#define CPU_BIOS (1 << CPU_BIOS_BIT)
-#define CPU_FREQ (1 << CPU_FREQ_BIT)
-#define CPU_MTRR (1 << CPU_MTTR_BIT)
-#define CPU_PERF (1 << CPU_PERF_BIT)
-#define CPU_CACHE (1 << CPU_CACHE_BIT)
-#define CPU_SYSENTER (1 << CPU_SYSENTER_BIT)
-#define CPU_THERM (1 << CPU_THERM_BIT)
-#define CPU_MISC (1 << CPU_MISC_BIT)
-#define CPU_DEBUG (1 << CPU_DEBUG_BIT)
-#define CPU_PAT (1 << CPU_PAT_BIT)
-#define CPU_VMX (1 << CPU_VMX_BIT)
-#define CPU_CALL (1 << CPU_CALL_BIT)
-#define CPU_BASE (1 << CPU_BASE_BIT)
-#define CPU_VER (1 << CPU_VER_BIT)
-#define CPU_CONF (1 << CPU_CONF_BIT)
-#define CPU_SMM (1 << CPU_SMM_BIT)
-#define CPU_SVM (1 << CPU_SVM_BIT)
-#define CPU_OSVM (1 << CPU_OSVM_BIT)
-#define CPU_TSS (1 << CPU_TSS_BIT)
-#define CPU_CR (1 << CPU_CR_BIT)
-#define CPU_DT (1 << CPU_DT_BIT)
-
-/* Register file flags */
-enum cpu_file_bit {
- CPU_INDEX_BIT, /* index */
- CPU_VALUE_BIT, /* value */
-};
-
-#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT)
-
-#define MAX_CPU_FILES 512
-
-struct cpu_private {
- unsigned cpu;
- unsigned type;
- unsigned reg;
- unsigned file;
-};
-
-struct cpu_debug_base {
- char *name; /* Register name */
- unsigned flag; /* Register flag */
- unsigned write; /* Register write flag */
-};
-
-/*
- * Currently it looks similar to cpu_debug_base but once we add more files
- * cpu_file_base will go in different direction
- */
-struct cpu_file_base {
- char *name; /* Register file name */
- unsigned flag; /* Register file flag */
- unsigned write; /* Register write flag */
-};
-
-struct cpu_cpuX_base {
- struct dentry *dentry; /* Register dentry */
- int init; /* Register index file */
-};
-
-struct cpu_debug_range {
- unsigned min; /* Register range min */
- unsigned max; /* Register range max */
- unsigned flag; /* Supported flags */
-};
-
-#endif /* _ASM_X86_CPU_DEBUG_H */
void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp);
#define compat_start_thread start_thread_ia32
-#define COMPAT_SET_PERSONALITY(ex) \
-do { \
- if (test_thread_flag(TIF_IA32)) \
- clear_thread_flag(TIF_ABI_PENDING); \
- else \
- set_thread_flag(TIF_ABI_PENDING); \
- current->personality |= force_personality32; \
-} while (0)
+void set_personality_ia32(void);
+#define COMPAT_SET_PERSONALITY(ex) set_personality_ia32()
#define COMPAT_ELF_PLATFORM ("i686")
extern unsigned long force_hpet_address;
extern u8 hpet_blockid;
extern int hpet_force_user;
+extern u8 hpet_msi_disable;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
extern void hpet_disable(void);
__u8 reserved[31];
};
+/* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */
+#define KVM_VCPUEVENT_VALID_NMI_PENDING 0x00000001
+#define KVM_VCPUEVENT_VALID_SIPI_VECTOR 0x00000002
+
/* for KVM_GET/SET_VCPU_EVENTS */
struct kvm_vcpu_events {
struct {
#define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9)
#define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0)
-extern struct atomic_notifier_head x86_mce_decoder_chain;
#ifdef __KERNEL__
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
#include <linux/percpu.h>
#include <linux/init.h>
#include <asm/atomic.h>
enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
struct microcode_ops {
- void (*init)(struct device *device);
- void (*fini)(void);
enum ucode_state (*request_microcode_user) (int cpu,
const void __user *buf, size_t size);
#define MSR_ARCH_PERFMON_EVENTSEL1 0x187
#define ARCH_PERFMON_EVENTSEL0_ENABLE (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_ANY (1 << 21)
#define ARCH_PERFMON_EVENTSEL_INT (1 << 20)
#define ARCH_PERFMON_EVENTSEL_OS (1 << 17)
#define ARCH_PERFMON_EVENTSEL_USR (1 << 16)
#define TIF_NOTSC 16 /* TSC is not accessible in userland */
#define TIF_IA32 17 /* 32bit process */
#define TIF_FORK 18 /* ret_from_fork */
-#define TIF_ABI_PENDING 19
#define TIF_MEMDIE 20
#define TIF_DEBUG 21 /* uses debug registers */
#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
#define _TIF_NOTSC (1 << TIF_NOTSC)
#define _TIF_IA32 (1 << TIF_IA32)
#define _TIF_FORK (1 << TIF_FORK)
-#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING)
#define _TIF_DEBUG (1 << TIF_DEBUG)
#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
#define _TIF_FREEZE (1 << TIF_FREEZE)
unsigned long n)
{
int sz = __compiletime_object_size(to);
- int ret = -EFAULT;
if (likely(sz == -1 || sz >= n))
- ret = _copy_from_user(to, from, n);
+ n = _copy_from_user(to, from, n);
else
copy_from_user_overflow();
- return ret;
+ return n;
}
long __must_check strncpy_from_user(char *dst, const char __user *src,
unsigned long n)
{
int sz = __compiletime_object_size(to);
- int ret = -EFAULT;
might_fault();
if (likely(sz == -1 || sz >= n))
- ret = _copy_from_user(to, from, n);
+ n = _copy_from_user(to, from, n);
#ifdef CONFIG_DEBUG_VM
else
WARN(1, "Buffer overflow detected!\n");
#endif
- return ret;
+ return n;
}
static __always_inline __must_check
* contiguous (although various IO spaces may punch holes in
* it)..
*
- * N - Number of bits in the node portion of a socket physical
- * address.
+ * N - Number of bits in the node portion of a socket physical
+ * address.
*
- * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
- * routers always have low bit of 1, C/MBricks have low bit
- * equal to 0. Most addressing macros that target UV hub chips
- * right shift the NASID by 1 to exclude the always-zero bit.
- * NASIDs contain up to 15 bits.
+ * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * routers always have low bit of 1, C/MBricks have low bit
+ * equal to 0. Most addressing macros that target UV hub chips
+ * right shift the NASID by 1 to exclude the always-zero bit.
+ * NASIDs contain up to 15 bits.
*
* GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
* of nasids.
*
- * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant
- * of the nasid for socket usage.
+ * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant
+ * of the nasid for socket usage.
*
*
* NumaLink Global Physical Address Format:
*
*
* APICID format
- * NOTE!!!!!! This is the current format of the APICID. However, code
- * should assume that this will change in the future. Use functions
- * in this file for all APICID bit manipulations and conversion.
+ * NOTE!!!!!! This is the current format of the APICID. However, code
+ * should assume that this will change in the future. Use functions
+ * in this file for all APICID bit manipulations and conversion.
*
- * 1111110000000000
- * 5432109876543210
+ * 1111110000000000
+ * 5432109876543210
* pppppppppplc0cch
* sssssssssss
*
* Note: Processor only supports 12 bits in the APICID register. The ACPI
* tables hold all 16 bits. Software needs to be aware of this.
*
- * Unless otherwise specified, all references to APICID refer to
- * the FULL value contained in ACPI tables, not the subset in the
- * processor APICID register.
+ * Unless otherwise specified, all references to APICID refer to
+ * the FULL value contained in ACPI tables, not the subset in the
+ * processor APICID register.
*/
};
DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
-#define uv_hub_info (&__get_cpu_var(__uv_hub_info))
+#define uv_hub_info (&__get_cpu_var(__uv_hub_info))
#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu))
/*
* Local & Global MMR space macros.
- * Note: macros are intended to be used ONLY by inline functions
- * in this file - not by other kernel code.
- * n - NASID (full 15-bit global nasid)
- * g - GNODE (full 15-bit global nasid, right shifted 1)
- * p - PNODE (local part of nsids, right shifted 1)
+ * Note: macros are intended to be used ONLY by inline functions
+ * in this file - not by other kernel code.
+ * n - NASID (full 15-bit global nasid)
+ * g - GNODE (full 15-bit global nasid, right shifted 1)
+ * p - PNODE (local part of nsids, right shifted 1)
*/
#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask)
#define UV_PNODE_TO_GNODE(p) ((p) |uv_hub_info->gnode_extra)
/*
* Macros for converting between kernel virtual addresses, socket local physical
* addresses, and UV global physical addresses.
- * Note: use the standard __pa() & __va() macros for converting
- * between socket virtual and socket physical addresses.
+ * Note: use the standard __pa() & __va() macros for converting
+ * between socket virtual and socket physical addresses.
*/
/* socket phys RAM --> UV global physical address */
* Access global MMRs using the low memory MMR32 space. This region supports
* faster MMR access but not all MMRs are accessible in this space.
*/
-static inline unsigned long *uv_global_mmr32_address(int pnode,
- unsigned long offset)
+static inline unsigned long *uv_global_mmr32_address(int pnode, unsigned long offset)
{
return __va(UV_GLOBAL_MMR32_BASE |
UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
}
-static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
- unsigned long val)
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset, unsigned long val)
{
writeq(val, uv_global_mmr32_address(pnode, offset));
}
-static inline unsigned long uv_read_global_mmr32(int pnode,
- unsigned long offset)
+static inline unsigned long uv_read_global_mmr32(int pnode, unsigned long offset)
{
return readq(uv_global_mmr32_address(pnode, offset));
}
* Access Global MMR space using the MMR space located at the top of physical
* memory.
*/
-static inline unsigned long *uv_global_mmr64_address(int pnode,
- unsigned long offset)
+static inline unsigned long *uv_global_mmr64_address(int pnode, unsigned long offset)
{
return __va(UV_GLOBAL_MMR64_BASE |
UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
}
-static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
- unsigned long val)
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset, unsigned long val)
{
writeq(val, uv_global_mmr64_address(pnode, offset));
}
-static inline unsigned long uv_read_global_mmr64(int pnode,
- unsigned long offset)
+static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset)
{
return readq(uv_global_mmr64_address(pnode, offset));
}
return UV_GLOBAL_GRU_MMR_BASE | offset | (pnode << uv_hub_info->m_val);
}
+static inline void uv_write_global_mmr8(int pnode, unsigned long offset, unsigned char val)
+{
+ writeb(val, uv_global_mmr64_address(pnode, offset));
+}
+
+static inline unsigned char uv_read_global_mmr8(int pnode, unsigned long offset)
+{
+ return readb(uv_global_mmr64_address(pnode, offset));
+}
+
/*
* Access hub local MMRs. Faster than using global space but only local MMRs
* are accessible.
}
}
+static inline unsigned long uv_scir_offset(int apicid)
+{
+ return SCIR_LOCAL_MMR_BASE | (apicid & 0x3f);
+}
+
static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
{
if (uv_cpu_hub_info(cpu)->scir.state != value) {
+ uv_write_global_mmr8(uv_cpu_to_pnode(cpu),
+ uv_cpu_hub_info(cpu)->scir.offset, value);
uv_cpu_hub_info(cpu)->scir.state = value;
- uv_write_local_mmr8(uv_cpu_hub_info(cpu)->scir.offset, value);
}
}
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
+/*
+ * Get the minimum revision number of the hub chips within the partition.
+ * 1 - initial rev 1.0 silicon
+ * 2 - rev 2.0 production silicon
+ */
+static inline int uv_get_min_hub_revision_id(void)
+{
+ extern int uv_min_hub_revision_id;
+
+ return uv_min_hub_revision_id;
+}
+
#endif /* CONFIG_X86_64 */
#endif /* _ASM_X86_UV_UV_HUB_H */
* if acpi_blacklisted() acpi_disabled = 1;
* acpi_irq_model=...
* ...
- *
- * return value: (currently ignored)
- * 0: success
- * !0: failure
*/
-int __init acpi_boot_table_init(void)
+void __init acpi_boot_table_init(void)
{
- int error;
-
dmi_check_system(acpi_dmi_table);
/*
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
- return 1;
+ return;
/*
* Initialize the ACPI boot-time table parser.
*/
- error = acpi_table_init();
- if (error) {
+ if (acpi_table_init()) {
disable_acpi();
- return error;
+ return;
}
acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
/*
* blacklist may disable ACPI entirely
*/
- error = acpi_blacklisted();
- if (error) {
+ if (acpi_blacklisted()) {
if (acpi_force) {
printk(KERN_WARNING PREFIX "acpi=force override\n");
} else {
printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
disable_acpi();
- return error;
+ return;
}
}
-
- return 0;
}
int __init early_acpi_boot_init(void)
#endif
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
+ if (strncmp(str, "sci_force_enable", 16) == 0)
+ acpi_set_sci_en_on_resume();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");
/* IOMMUs have a non-present cache? */
bool amd_iommu_np_cache __read_mostly;
+/*
+ * Set to true if ACPI table parsing and hardware intialization went properly
+ */
+static bool amd_iommu_initialized;
+
/*
* List of protection domains - used during resume
*/
}
WARN_ON(p != end);
+ amd_iommu_initialized = true;
+
return 0;
}
if (acpi_table_parse("IVRS", init_iommu_all) != 0)
goto free;
+ if (!amd_iommu_initialized)
+ goto free;
+
if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
goto free;
#include <asm/x86_init.h>
int gart_iommu_aperture;
+EXPORT_SYMBOL_GPL(gart_iommu_aperture);
int gart_iommu_aperture_disabled __initdata;
int gart_iommu_aperture_allowed __initdata;
/*
* The highest APIC ID seen during enumeration.
- *
- * On AMD, this determines the messaging protocol we can use: if all APIC IDs
- * are in the 0 ... 7 range, then we can use logical addressing which
- * has some performance advantages (better broadcasting).
- *
- * If there's an APIC ID above 8, we use physical addressing.
*/
unsigned int max_physical_apicid;
max_physical_apicid = apicid;
#ifdef CONFIG_X86_32
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (num_processors > 8)
- def_to_bigsmp = 1;
- break;
- case X86_VENDOR_AMD:
- if (max_physical_apicid >= 8)
+ if (num_processors > 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
def_to_bigsmp = 1;
+ }
}
#endif
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
}
+
+ if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
+ printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
+ return 1;
+ }
#endif
return 0;
cfg = irq_cfg(irq);
raw_spin_lock(&desc->lock);
+ /*
+ * Check if the irq migration is in progress. If so, we
+ * haven't received the cleanup request yet for this irq.
+ */
+ if (cfg->move_in_progress)
+ goto unlock;
+
if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
goto unlock;
}
#endif
- if (apic == &apic_flat) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (num_processors > 8)
- apic = &apic_physflat;
- break;
- case X86_VENDOR_AMD:
- if (max_physical_apicid >= 8)
- apic = &apic_physflat;
- }
- }
+ if (apic == &apic_flat && num_processors > 8)
+ apic = &apic_physflat;
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
static enum uv_system_type uv_system_type;
static u64 gru_start_paddr, gru_end_paddr;
+int uv_min_hub_revision_id;
+EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
static inline bool is_GRU_range(u64 start, u64 end)
{
mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
node_id.v = *mmr;
early_iounmap(mmr, sizeof(*mmr));
+
+ /* Currently, all blades have same revision number */
+ uv_min_hub_revision_id = node_id.s.revision;
+
return node_id.s.node_id;
}
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
+ int nodeid;
+
if (!strcmp(oem_id, "SGI")) {
+ nodeid = early_get_nodeid();
x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range;
if (!strcmp(oem_table_id, "UVL"))
uv_system_type = UV_LEGACY_APIC;
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
__get_cpu_var(x2apic_extra_bits) =
- early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
+ nodeid << (UV_APIC_PNODE_SHIFT - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
enum map_type {map_wb, map_uc};
-static __init void map_high(char *id, unsigned long base, int shift,
- int max_pnode, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int pshift,
+ int bshift, int max_pnode, enum map_type map_type)
{
unsigned long bytes, paddr;
- paddr = base << shift;
- bytes = (1UL << shift) * (max_pnode + 1);
+ paddr = base << pshift;
+ bytes = (1UL << bshift) * (max_pnode + 1);
printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
paddr + bytes);
if (map_type == map_uc)
gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
if (gru.s.enable) {
- map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+ map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
gru_start_paddr = ((u64)gru.s.base << shift);
gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
if (mmr.s.enable)
- map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+ map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
}
static __init void map_mmioh_high(int max_pnode)
mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
if (mmioh.s.enable)
- map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+ map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+ max_pnode, map_uc);
}
static __init void map_low_mmrs(void)
uv_rtc_init();
for_each_present_cpu(cpu) {
+ int apicid = per_cpu(x86_cpu_to_apicid, cpu);
+
nid = cpu_to_node(cpu);
- pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
+ pnode = uv_apicid_to_pnode(apicid);
blade = boot_pnode_to_blade(pnode);
lcpu = uv_blade_info[blade].nr_possible_cpus;
uv_blade_info[blade].nr_possible_cpus++;
uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id;
- uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu;
+ uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
uv_node_to_blade[nid] = blade;
uv_cpu_to_blade[cpu] = blade;
max_pnode = max(pnode, max_pnode);
- printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, "
- "lcpu %d, blade %d\n",
- cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
- lcpu, blade);
+ printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n",
+ cpu, apicid, pnode, nid, lcpu, blade);
}
/* Add blade/pnode info for nodes without cpus */
obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o
obj-$(CONFIG_X86_64) += bugs_64.o
-obj-$(CONFIG_X86_CPU_DEBUG) += cpu_debug.o
-
obj-$(CONFIG_CPU_SUP_INTEL) += intel.o
obj-$(CONFIG_CPU_SUP_AMD) += amd.o
obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
+++ /dev/null
-/*
- * CPU x86 architecture debug code
- *
- * Copyright(C) 2009 Jaswinder Singh Rajput
- *
- * For licencing details see kernel-base/COPYING
- */
-
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-#include <linux/seq_file.h>
-#include <linux/debugfs.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/percpu.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-
-#include <asm/cpu_debug.h>
-#include <asm/paravirt.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/apic.h>
-#include <asm/desc.h>
-
-static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr);
-static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr);
-static DEFINE_PER_CPU(int, cpud_priv_count);
-
-static DEFINE_MUTEX(cpu_debug_lock);
-
-static struct dentry *cpu_debugfs_dir;
-
-static struct cpu_debug_base cpu_base[] = {
- { "mc", CPU_MC, 0 },
- { "monitor", CPU_MONITOR, 0 },
- { "time", CPU_TIME, 0 },
- { "pmc", CPU_PMC, 1 },
- { "platform", CPU_PLATFORM, 0 },
- { "apic", CPU_APIC, 0 },
- { "poweron", CPU_POWERON, 0 },
- { "control", CPU_CONTROL, 0 },
- { "features", CPU_FEATURES, 0 },
- { "lastbranch", CPU_LBRANCH, 0 },
- { "bios", CPU_BIOS, 0 },
- { "freq", CPU_FREQ, 0 },
- { "mtrr", CPU_MTRR, 0 },
- { "perf", CPU_PERF, 0 },
- { "cache", CPU_CACHE, 0 },
- { "sysenter", CPU_SYSENTER, 0 },
- { "therm", CPU_THERM, 0 },
- { "misc", CPU_MISC, 0 },
- { "debug", CPU_DEBUG, 0 },
- { "pat", CPU_PAT, 0 },
- { "vmx", CPU_VMX, 0 },
- { "call", CPU_CALL, 0 },
- { "base", CPU_BASE, 0 },
- { "ver", CPU_VER, 0 },
- { "conf", CPU_CONF, 0 },
- { "smm", CPU_SMM, 0 },
- { "svm", CPU_SVM, 0 },
- { "osvm", CPU_OSVM, 0 },
- { "tss", CPU_TSS, 0 },
- { "cr", CPU_CR, 0 },
- { "dt", CPU_DT, 0 },
- { "registers", CPU_REG_ALL, 0 },
-};
-
-static struct cpu_file_base cpu_file[] = {
- { "index", CPU_REG_ALL, 0 },
- { "value", CPU_REG_ALL, 1 },
-};
-
-/* CPU Registers Range */
-static struct cpu_debug_range cpu_reg_range[] = {
- { 0x00000000, 0x00000001, CPU_MC, },
- { 0x00000006, 0x00000007, CPU_MONITOR, },
- { 0x00000010, 0x00000010, CPU_TIME, },
- { 0x00000011, 0x00000013, CPU_PMC, },
- { 0x00000017, 0x00000017, CPU_PLATFORM, },
- { 0x0000001B, 0x0000001B, CPU_APIC, },
- { 0x0000002A, 0x0000002B, CPU_POWERON, },
- { 0x0000002C, 0x0000002C, CPU_FREQ, },
- { 0x0000003A, 0x0000003A, CPU_CONTROL, },
- { 0x00000040, 0x00000047, CPU_LBRANCH, },
- { 0x00000060, 0x00000067, CPU_LBRANCH, },
- { 0x00000079, 0x00000079, CPU_BIOS, },
- { 0x00000088, 0x0000008A, CPU_CACHE, },
- { 0x0000008B, 0x0000008B, CPU_BIOS, },
- { 0x0000009B, 0x0000009B, CPU_MONITOR, },
- { 0x000000C1, 0x000000C4, CPU_PMC, },
- { 0x000000CD, 0x000000CD, CPU_FREQ, },
- { 0x000000E7, 0x000000E8, CPU_PERF, },
- { 0x000000FE, 0x000000FE, CPU_MTRR, },
-
- { 0x00000116, 0x0000011E, CPU_CACHE, },
- { 0x00000174, 0x00000176, CPU_SYSENTER, },
- { 0x00000179, 0x0000017B, CPU_MC, },
- { 0x00000186, 0x00000189, CPU_PMC, },
- { 0x00000198, 0x00000199, CPU_PERF, },
- { 0x0000019A, 0x0000019A, CPU_TIME, },
- { 0x0000019B, 0x0000019D, CPU_THERM, },
- { 0x000001A0, 0x000001A0, CPU_MISC, },
- { 0x000001C9, 0x000001C9, CPU_LBRANCH, },
- { 0x000001D7, 0x000001D8, CPU_LBRANCH, },
- { 0x000001D9, 0x000001D9, CPU_DEBUG, },
- { 0x000001DA, 0x000001E0, CPU_LBRANCH, },
-
- { 0x00000200, 0x0000020F, CPU_MTRR, },
- { 0x00000250, 0x00000250, CPU_MTRR, },
- { 0x00000258, 0x00000259, CPU_MTRR, },
- { 0x00000268, 0x0000026F, CPU_MTRR, },
- { 0x00000277, 0x00000277, CPU_PAT, },
- { 0x000002FF, 0x000002FF, CPU_MTRR, },
-
- { 0x00000300, 0x00000311, CPU_PMC, },
- { 0x00000345, 0x00000345, CPU_PMC, },
- { 0x00000360, 0x00000371, CPU_PMC, },
- { 0x0000038D, 0x00000390, CPU_PMC, },
- { 0x000003A0, 0x000003BE, CPU_PMC, },
- { 0x000003C0, 0x000003CD, CPU_PMC, },
- { 0x000003E0, 0x000003E1, CPU_PMC, },
- { 0x000003F0, 0x000003F2, CPU_PMC, },
-
- { 0x00000400, 0x00000417, CPU_MC, },
- { 0x00000480, 0x0000048B, CPU_VMX, },
-
- { 0x00000600, 0x00000600, CPU_DEBUG, },
- { 0x00000680, 0x0000068F, CPU_LBRANCH, },
- { 0x000006C0, 0x000006CF, CPU_LBRANCH, },
-
- { 0x000107CC, 0x000107D3, CPU_PMC, },
-
- { 0xC0000080, 0xC0000080, CPU_FEATURES, },
- { 0xC0000081, 0xC0000084, CPU_CALL, },
- { 0xC0000100, 0xC0000102, CPU_BASE, },
- { 0xC0000103, 0xC0000103, CPU_TIME, },
-
- { 0xC0010000, 0xC0010007, CPU_PMC, },
- { 0xC0010010, 0xC0010010, CPU_CONF, },
- { 0xC0010015, 0xC0010015, CPU_CONF, },
- { 0xC0010016, 0xC001001A, CPU_MTRR, },
- { 0xC001001D, 0xC001001D, CPU_MTRR, },
- { 0xC001001F, 0xC001001F, CPU_CONF, },
- { 0xC0010030, 0xC0010035, CPU_BIOS, },
- { 0xC0010044, 0xC0010048, CPU_MC, },
- { 0xC0010050, 0xC0010056, CPU_SMM, },
- { 0xC0010058, 0xC0010058, CPU_CONF, },
- { 0xC0010060, 0xC0010060, CPU_CACHE, },
- { 0xC0010061, 0xC0010068, CPU_SMM, },
- { 0xC0010069, 0xC001006B, CPU_SMM, },
- { 0xC0010070, 0xC0010071, CPU_SMM, },
- { 0xC0010111, 0xC0010113, CPU_SMM, },
- { 0xC0010114, 0xC0010118, CPU_SVM, },
- { 0xC0010140, 0xC0010141, CPU_OSVM, },
- { 0xC0011022, 0xC0011023, CPU_CONF, },
-};
-
-static int is_typeflag_valid(unsigned cpu, unsigned flag)
-{
- int i;
-
- /* Standard Registers should be always valid */
- if (flag >= CPU_TSS)
- return 1;
-
- for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
- if (cpu_reg_range[i].flag == flag)
- return 1;
- }
-
- /* Invalid */
- return 0;
-}
-
-static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max,
- int index, unsigned flag)
-{
- if (cpu_reg_range[index].flag == flag) {
- *min = cpu_reg_range[index].min;
- *max = cpu_reg_range[index].max;
- } else
- *max = 0;
-
- return *max;
-}
-
-/* This function can also be called with seq = NULL for printk */
-static void print_cpu_data(struct seq_file *seq, unsigned type,
- u32 low, u32 high)
-{
- struct cpu_private *priv;
- u64 val = high;
-
- if (seq) {
- priv = seq->private;
- if (priv->file) {
- val = (val << 32) | low;
- seq_printf(seq, "0x%llx\n", val);
- } else
- seq_printf(seq, " %08x: %08x_%08x\n",
- type, high, low);
- } else
- printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low);
-}
-
-/* This function can also be called with seq = NULL for printk */
-static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag)
-{
- unsigned msr, msr_min, msr_max;
- struct cpu_private *priv;
- u32 low, high;
- int i;
-
- if (seq) {
- priv = seq->private;
- if (priv->file) {
- if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg,
- &low, &high))
- print_cpu_data(seq, priv->reg, low, high);
- return;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
- if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag))
- continue;
-
- for (msr = msr_min; msr <= msr_max; msr++) {
- if (rdmsr_safe_on_cpu(cpu, msr, &low, &high))
- continue;
- print_cpu_data(seq, msr, low, high);
- }
- }
-}
-
-static void print_tss(void *arg)
-{
- struct pt_regs *regs = task_pt_regs(current);
- struct seq_file *seq = arg;
- unsigned int seg;
-
- seq_printf(seq, " RAX\t: %016lx\n", regs->ax);
- seq_printf(seq, " RBX\t: %016lx\n", regs->bx);
- seq_printf(seq, " RCX\t: %016lx\n", regs->cx);
- seq_printf(seq, " RDX\t: %016lx\n", regs->dx);
-
- seq_printf(seq, " RSI\t: %016lx\n", regs->si);
- seq_printf(seq, " RDI\t: %016lx\n", regs->di);
- seq_printf(seq, " RBP\t: %016lx\n", regs->bp);
- seq_printf(seq, " ESP\t: %016lx\n", regs->sp);
-
-#ifdef CONFIG_X86_64
- seq_printf(seq, " R08\t: %016lx\n", regs->r8);
- seq_printf(seq, " R09\t: %016lx\n", regs->r9);
- seq_printf(seq, " R10\t: %016lx\n", regs->r10);
- seq_printf(seq, " R11\t: %016lx\n", regs->r11);
- seq_printf(seq, " R12\t: %016lx\n", regs->r12);
- seq_printf(seq, " R13\t: %016lx\n", regs->r13);
- seq_printf(seq, " R14\t: %016lx\n", regs->r14);
- seq_printf(seq, " R15\t: %016lx\n", regs->r15);
-#endif
-
- asm("movl %%cs,%0" : "=r" (seg));
- seq_printf(seq, " CS\t: %04x\n", seg);
- asm("movl %%ds,%0" : "=r" (seg));
- seq_printf(seq, " DS\t: %04x\n", seg);
- seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff);
- asm("movl %%es,%0" : "=r" (seg));
- seq_printf(seq, " ES\t: %04x\n", seg);
- asm("movl %%fs,%0" : "=r" (seg));
- seq_printf(seq, " FS\t: %04x\n", seg);
- asm("movl %%gs,%0" : "=r" (seg));
- seq_printf(seq, " GS\t: %04x\n", seg);
-
- seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags);
-
- seq_printf(seq, " EIP\t: %016lx\n", regs->ip);
-}
-
-static void print_cr(void *arg)
-{
- struct seq_file *seq = arg;
-
- seq_printf(seq, " cr0\t: %016lx\n", read_cr0());
- seq_printf(seq, " cr2\t: %016lx\n", read_cr2());
- seq_printf(seq, " cr3\t: %016lx\n", read_cr3());
- seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe());
-#ifdef CONFIG_X86_64
- seq_printf(seq, " cr8\t: %016lx\n", read_cr8());
-#endif
-}
-
-static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt)
-{
- seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size));
-}
-
-static void print_dt(void *seq)
-{
- struct desc_ptr dt;
- unsigned long ldt;
-
- /* IDT */
- store_idt((struct desc_ptr *)&dt);
- print_desc_ptr("IDT", seq, dt);
-
- /* GDT */
- store_gdt((struct desc_ptr *)&dt);
- print_desc_ptr("GDT", seq, dt);
-
- /* LDT */
- store_ldt(ldt);
- seq_printf(seq, " LDT\t: %016lx\n", ldt);
-
- /* TR */
- store_tr(ldt);
- seq_printf(seq, " TR\t: %016lx\n", ldt);
-}
-
-static void print_dr(void *arg)
-{
- struct seq_file *seq = arg;
- unsigned long dr;
- int i;
-
- for (i = 0; i < 8; i++) {
- /* Ignore db4, db5 */
- if ((i == 4) || (i == 5))
- continue;
- get_debugreg(dr, i);
- seq_printf(seq, " dr%d\t: %016lx\n", i, dr);
- }
-
- seq_printf(seq, "\n MSR\t:\n");
-}
-
-static void print_apic(void *arg)
-{
- struct seq_file *seq = arg;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- seq_printf(seq, " LAPIC\t:\n");
- seq_printf(seq, " ID\t\t: %08x\n", apic_read(APIC_ID) >> 24);
- seq_printf(seq, " LVR\t\t: %08x\n", apic_read(APIC_LVR));
- seq_printf(seq, " TASKPRI\t: %08x\n", apic_read(APIC_TASKPRI));
- seq_printf(seq, " ARBPRI\t\t: %08x\n", apic_read(APIC_ARBPRI));
- seq_printf(seq, " PROCPRI\t: %08x\n", apic_read(APIC_PROCPRI));
- seq_printf(seq, " LDR\t\t: %08x\n", apic_read(APIC_LDR));
- seq_printf(seq, " DFR\t\t: %08x\n", apic_read(APIC_DFR));
- seq_printf(seq, " SPIV\t\t: %08x\n", apic_read(APIC_SPIV));
- seq_printf(seq, " ISR\t\t: %08x\n", apic_read(APIC_ISR));
- seq_printf(seq, " ESR\t\t: %08x\n", apic_read(APIC_ESR));
- seq_printf(seq, " ICR\t\t: %08x\n", apic_read(APIC_ICR));
- seq_printf(seq, " ICR2\t\t: %08x\n", apic_read(APIC_ICR2));
- seq_printf(seq, " LVTT\t\t: %08x\n", apic_read(APIC_LVTT));
- seq_printf(seq, " LVTTHMR\t: %08x\n", apic_read(APIC_LVTTHMR));
- seq_printf(seq, " LVTPC\t\t: %08x\n", apic_read(APIC_LVTPC));
- seq_printf(seq, " LVT0\t\t: %08x\n", apic_read(APIC_LVT0));
- seq_printf(seq, " LVT1\t\t: %08x\n", apic_read(APIC_LVT1));
- seq_printf(seq, " LVTERR\t\t: %08x\n", apic_read(APIC_LVTERR));
- seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT));
- seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT));
- seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR));
- if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
- unsigned int i, v, maxeilvt;
-
- v = apic_read(APIC_EFEAT);
- maxeilvt = (v >> 16) & 0xff;
- seq_printf(seq, " EFEAT\t\t: %08x\n", v);
- seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL));
-
- for (i = 0; i < maxeilvt; i++) {
- v = apic_read(APIC_EILVTn(i));
- seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v);
- }
- }
-#endif /* CONFIG_X86_LOCAL_APIC */
- seq_printf(seq, "\n MSR\t:\n");
-}
-
-static int cpu_seq_show(struct seq_file *seq, void *v)
-{
- struct cpu_private *priv = seq->private;
-
- if (priv == NULL)
- return -EINVAL;
-
- switch (cpu_base[priv->type].flag) {
- case CPU_TSS:
- smp_call_function_single(priv->cpu, print_tss, seq, 1);
- break;
- case CPU_CR:
- smp_call_function_single(priv->cpu, print_cr, seq, 1);
- break;
- case CPU_DT:
- smp_call_function_single(priv->cpu, print_dt, seq, 1);
- break;
- case CPU_DEBUG:
- if (priv->file == CPU_INDEX_BIT)
- smp_call_function_single(priv->cpu, print_dr, seq, 1);
- print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
- break;
- case CPU_APIC:
- if (priv->file == CPU_INDEX_BIT)
- smp_call_function_single(priv->cpu, print_apic, seq, 1);
- print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
- break;
-
- default:
- print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
- break;
- }
- seq_printf(seq, "\n");
-
- return 0;
-}
-
-static void *cpu_seq_start(struct seq_file *seq, loff_t *pos)
-{
- if (*pos == 0) /* One time is enough ;-) */
- return seq;
-
- return NULL;
-}
-
-static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- (*pos)++;
-
- return cpu_seq_start(seq, pos);
-}
-
-static void cpu_seq_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations cpu_seq_ops = {
- .start = cpu_seq_start,
- .next = cpu_seq_next,
- .stop = cpu_seq_stop,
- .show = cpu_seq_show,
-};
-
-static int cpu_seq_open(struct inode *inode, struct file *file)
-{
- struct cpu_private *priv = inode->i_private;
- struct seq_file *seq;
- int err;
-
- err = seq_open(file, &cpu_seq_ops);
- if (!err) {
- seq = file->private_data;
- seq->private = priv;
- }
-
- return err;
-}
-
-static int write_msr(struct cpu_private *priv, u64 val)
-{
- u32 low, high;
-
- high = (val >> 32) & 0xffffffff;
- low = val & 0xffffffff;
-
- if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high))
- return 0;
-
- return -EPERM;
-}
-
-static int write_cpu_register(struct cpu_private *priv, const char *buf)
-{
- int ret = -EPERM;
- u64 val;
-
- ret = strict_strtoull(buf, 0, &val);
- if (ret < 0)
- return ret;
-
- /* Supporting only MSRs */
- if (priv->type < CPU_TSS_BIT)
- return write_msr(priv, val);
-
- return ret;
-}
-
-static ssize_t cpu_write(struct file *file, const char __user *ubuf,
- size_t count, loff_t *off)
-{
- struct seq_file *seq = file->private_data;
- struct cpu_private *priv = seq->private;
- char buf[19];
-
- if ((priv == NULL) || (count >= sizeof(buf)))
- return -EINVAL;
-
- if (copy_from_user(&buf, ubuf, count))
- return -EFAULT;
-
- buf[count] = 0;
-
- if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write))
- if (!write_cpu_register(priv, buf))
- return count;
-
- return -EACCES;
-}
-
-static const struct file_operations cpu_fops = {
- .owner = THIS_MODULE,
- .open = cpu_seq_open,
- .read = seq_read,
- .write = cpu_write,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg,
- unsigned file, struct dentry *dentry)
-{
- struct cpu_private *priv = NULL;
-
- /* Already intialized */
- if (file == CPU_INDEX_BIT)
- if (per_cpu(cpud_arr[type].init, cpu))
- return 0;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL)
- return -ENOMEM;
-
- priv->cpu = cpu;
- priv->type = type;
- priv->reg = reg;
- priv->file = file;
- mutex_lock(&cpu_debug_lock);
- per_cpu(cpud_priv_arr[type], cpu) = priv;
- per_cpu(cpud_priv_count, cpu)++;
- mutex_unlock(&cpu_debug_lock);
-
- if (file)
- debugfs_create_file(cpu_file[file].name, S_IRUGO,
- dentry, (void *)priv, &cpu_fops);
- else {
- debugfs_create_file(cpu_base[type].name, S_IRUGO,
- per_cpu(cpud_arr[type].dentry, cpu),
- (void *)priv, &cpu_fops);
- mutex_lock(&cpu_debug_lock);
- per_cpu(cpud_arr[type].init, cpu) = 1;
- mutex_unlock(&cpu_debug_lock);
- }
-
- return 0;
-}
-
-static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg,
- struct dentry *dentry)
-{
- unsigned file;
- int err = 0;
-
- for (file = 0; file < ARRAY_SIZE(cpu_file); file++) {
- err = cpu_create_file(cpu, type, reg, file, dentry);
- if (err)
- return err;
- }
-
- return err;
-}
-
-static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry)
-{
- struct dentry *cpu_dentry = NULL;
- unsigned reg, reg_min, reg_max;
- int i, err = 0;
- char reg_dir[12];
- u32 low, high;
-
- for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
- if (!get_cpu_range(cpu, ®_min, ®_max, i,
- cpu_base[type].flag))
- continue;
-
- for (reg = reg_min; reg <= reg_max; reg++) {
- if (rdmsr_safe_on_cpu(cpu, reg, &low, &high))
- continue;
-
- sprintf(reg_dir, "0x%x", reg);
- cpu_dentry = debugfs_create_dir(reg_dir, dentry);
- err = cpu_init_regfiles(cpu, type, reg, cpu_dentry);
- if (err)
- return err;
- }
- }
-
- return err;
-}
-
-static int cpu_init_allreg(unsigned cpu, struct dentry *dentry)
-{
- struct dentry *cpu_dentry = NULL;
- unsigned type;
- int err = 0;
-
- for (type = 0; type < ARRAY_SIZE(cpu_base) - 1; type++) {
- if (!is_typeflag_valid(cpu, cpu_base[type].flag))
- continue;
- cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry);
- per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry;
-
- if (type < CPU_TSS_BIT)
- err = cpu_init_msr(cpu, type, cpu_dentry);
- else
- err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT,
- cpu_dentry);
- if (err)
- return err;
- }
-
- return err;
-}
-
-static int cpu_init_cpu(void)
-{
- struct dentry *cpu_dentry = NULL;
- struct cpuinfo_x86 *cpui;
- char cpu_dir[12];
- unsigned cpu;
- int err = 0;
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
- cpui = &cpu_data(cpu);
- if (!cpu_has(cpui, X86_FEATURE_MSR))
- continue;
-
- sprintf(cpu_dir, "cpu%d", cpu);
- cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir);
- err = cpu_init_allreg(cpu, cpu_dentry);
-
- pr_info("cpu%d(%d) debug files %d\n",
- cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu));
- if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) {
- pr_err("Register files count %d exceeds limit %d\n",
- per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES);
- per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES;
- err = -ENFILE;
- }
- if (err)
- return err;
- }
-
- return err;
-}
-
-static int __init cpu_debug_init(void)
-{
- cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir);
-
- return cpu_init_cpu();
-}
-
-static void __exit cpu_debug_exit(void)
-{
- int i, cpu;
-
- if (cpu_debugfs_dir)
- debugfs_remove_recursive(cpu_debugfs_dir);
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++)
- for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++)
- kfree(per_cpu(cpud_priv_arr[i], cpu));
-}
-
-module_init(cpu_debug_init);
-module_exit(cpu_debug_exit);
-
-MODULE_AUTHOR("Jaswinder Singh Rajput");
-MODULE_DESCRIPTION("CPU Debug module");
-MODULE_LICENSE("GPL");
bits |= 0x2;
if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
bits |= 0x1;
+
+ /*
+ * ANY bit is supported in v3 and up
+ */
+ if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY)
+ bits |= 0x4;
+
bits <<= (idx * 4);
mask = 0xfULL << (idx * 4);
callchain_store(entry, PERF_CONTEXT_KERNEL);
callchain_store(entry, regs->ip);
- dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
+ dump_trace(NULL, regs, NULL, regs->bp, &backtrace_ops, entry);
}
/*
for_each_online_cpu(cpu)
cpuid_device_destroy(cpu);
class_destroy(cpuid_class);
- unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+ __unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
unregister_hotcpu_notifier(&cpuid_class_cpu_notifier);
}
while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) {
unsigned long addr = *ret_addr;
- if (__kernel_text_address(addr)) {
- ops->address(data, addr, 1);
- frame = frame->next_frame;
- ret_addr = &frame->return_address;
- print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
- }
+ if (!__kernel_text_address(addr))
+ break;
+
+ ops->address(data, addr, 1);
+ frame = frame->next_frame;
+ ret_addr = &frame->return_address;
+ print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
}
+
return (unsigned long)frame;
}
EXPORT_SYMBOL_GPL(print_context_stack_bp);
};
static struct early_res early_res[MAX_EARLY_RES] __initdata = {
{ 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE)
/*
* But first pinch a few for the stack/trampoline stuff
* FIXME: Don't need the extra page at 4K, but need to fix
* trampoline before removing it. (see the GDT stuff)
*/
- { PAGE_SIZE, PAGE_SIZE, "EX TRAMPOLINE", 1 },
+ { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE", 1 },
#endif
{}
*/
unsigned long hpet_address;
u8 hpet_blockid; /* OS timer block num */
+u8 hpet_msi_disable;
+
#ifdef CONFIG_PCI_MSI
static unsigned long hpet_num_timers;
#endif
unsigned int num_timers_used = 0;
int i;
+ if (hpet_msi_disable)
+ return;
+
if (boot_cpu_has(X86_FEATURE_ARAT))
return;
id = hpet_readl(HPET_ID);
hpet_reserve_platform_timers(hpet_readl(HPET_ID));
hpet_print_config();
+ if (hpet_msi_disable)
+ return 0;
+
if (boot_cpu_has(X86_FEATURE_ARAT))
return 0;
#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
#define UCODE_UCODE_TYPE 0x00000001
-const struct firmware *firmware;
-static int supported_cpu;
-
struct equiv_cpu_entry {
u32 installed_cpu;
u32 fixed_errata_mask;
static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
u32 dummy;
- if (!supported_cpu)
- return -1;
-
memset(csig, 0, sizeof(*csig));
+ if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+ pr_warning("microcode: CPU%d: AMD CPU family 0x%x not "
+ "supported\n", cpu, c->x86);
+ return -1;
+ }
rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev);
return 0;
static enum ucode_state request_microcode_fw(int cpu, struct device *device)
{
+ const char *fw_name = "amd-ucode/microcode_amd.bin";
+ const struct firmware *firmware;
enum ucode_state ret;
- if (firmware == NULL)
+ if (request_firmware(&firmware, fw_name, device)) {
+ printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
return UCODE_NFOUND;
+ }
if (*(u32 *)firmware->data != UCODE_MAGIC) {
pr_err("invalid UCODE_MAGIC (0x%08x)\n",
ret = generic_load_microcode(cpu, firmware->data, firmware->size);
+ release_firmware(firmware);
+
return ret;
}
uci->mc = NULL;
}
-void init_microcode_amd(struct device *device)
-{
- const char *fw_name = "amd-ucode/microcode_amd.bin";
- struct cpuinfo_x86 *c = &boot_cpu_data;
-
- WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
-
- if (c->x86 < 0x10) {
- pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
- return;
- }
- supported_cpu = 1;
-
- if (request_firmware(&firmware, fw_name, device))
- pr_err("failed to load file %s\n", fw_name);
-}
-
-void fini_microcode_amd(void)
-{
- release_firmware(firmware);
-}
-
static struct microcode_ops microcode_amd_ops = {
- .init = init_microcode_amd,
- .fini = fini_microcode_amd,
.request_microcode_user = request_microcode_user,
.request_microcode_fw = request_microcode_fw,
.collect_cpu_info = collect_cpu_info_amd,
return PTR_ERR(microcode_pdev);
}
- if (microcode_ops->init)
- microcode_ops->init(µcode_pdev->dev);
-
get_online_cpus();
mutex_lock(µcode_mutex);
platform_device_unregister(microcode_pdev);
- if (microcode_ops->fini)
- microcode_ops->fini();
-
microcode_ops = NULL;
pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
for_each_online_cpu(cpu)
msr_device_destroy(cpu);
class_destroy(msr_class);
- unregister_chrdev(MSR_MAJOR, "cpu/msr");
+ __unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr");
unregister_hotcpu_notifier(&msr_class_cpu_notifier);
}
if (!product)
product = "";
- printk("\n");
- printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+ printk(KERN_CONT "\n");
+ printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
current->pid, current->comm, print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
{
struct task_struct *tsk = current;
-#ifdef CONFIG_X86_64
- if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
- clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
- if (test_tsk_thread_flag(tsk, TIF_IA32)) {
- clear_tsk_thread_flag(tsk, TIF_IA32);
- } else {
- set_tsk_thread_flag(tsk, TIF_IA32);
- current_thread_info()->status |= TS_COMPAT;
- }
- }
-#endif
-
flush_ptrace_hw_breakpoint(tsk);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
/*
regs.es = __USER_DS;
regs.fs = __KERNEL_PERCPU;
regs.gs = __KERNEL_STACK_CANARY;
+#else
+ regs.ss = __KERNEL_DS;
#endif
regs.orig_ax = -1;
show_regs_common();
- printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
+ printk(KERN_DEFAULT "EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
(u16)regs->cs, regs->ip, regs->flags,
smp_processor_id());
print_symbol("EIP is at %s\n", regs->ip);
- printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+ printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
regs->ax, regs->bx, regs->cx, regs->dx);
- printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+ printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
regs->si, regs->di, regs->bp, sp);
- printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
+ printk(KERN_DEFAULT " DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
(u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
if (!all)
cr2 = read_cr2();
cr3 = read_cr3();
cr4 = read_cr4_safe();
- printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+ printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
cr0, cr2, cr3, cr4);
get_debugreg(d0, 0);
get_debugreg(d1, 1);
get_debugreg(d2, 2);
get_debugreg(d3, 3);
- printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+ printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
d0, d1, d2, d3);
get_debugreg(d6, 6);
get_debugreg(d7, 7);
- printk("DR6: %08lx DR7: %08lx\n",
+ printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n",
d6, d7);
}
unsigned int ds, cs, es;
show_regs_common();
- printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
+ printk(KERN_DEFAULT "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
printk_address(regs->ip, 1);
- printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss,
+ printk(KERN_DEFAULT "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss,
regs->sp, regs->flags);
- printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
+ printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n",
regs->ax, regs->bx, regs->cx);
- printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
+ printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n",
regs->dx, regs->si, regs->di);
- printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
+ printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n",
regs->bp, regs->r8, regs->r9);
- printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
+ printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n",
regs->r10, regs->r11, regs->r12);
- printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
+ printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n",
regs->r13, regs->r14, regs->r15);
asm("movl %%ds,%0" : "=r" (ds));
cr3 = read_cr3();
cr4 = read_cr4();
- printk(KERN_INFO "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
+ printk(KERN_DEFAULT "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
fs, fsindex, gs, gsindex, shadowgs);
- printk(KERN_INFO "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
+ printk(KERN_DEFAULT "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
es, cr0);
- printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
+ printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
cr4);
get_debugreg(d0, 0);
get_debugreg(d1, 1);
get_debugreg(d2, 2);
- printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
+ printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
get_debugreg(d3, 3);
get_debugreg(d6, 6);
get_debugreg(d7, 7);
- printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+ printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
}
void show_regs(struct pt_regs *regs)
current->personality &= ~READ_IMPLIES_EXEC;
}
+void set_personality_ia32(void)
+{
+ /* inherit personality from parent */
+
+ /* Make sure to be in 32bit mode */
+ set_thread_flag(TIF_IA32);
+
+ /* Prepare the first "return" to user space */
+ current_thread_info()->status |= TS_COMPAT;
+}
+
unsigned long get_wchan(struct task_struct *p)
{
unsigned long stack;
break;
}
}
+
+/*
+ * HPET MSI on some boards (ATI SB700/SB800) has side effect on
+ * floppy DMA. Disable HPET MSI on such platforms.
+ */
+static void force_disable_hpet_msi(struct pci_dev *unused)
+{
+ hpet_msi_disable = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ force_disable_hpet_msi);
+
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
if (unlikely(!apic_enabled(apic)))
break;
+ if (trig_mode) {
+ apic_debug("level trig mode for vector %d", vector);
+ apic_set_vector(vector, apic->regs + APIC_TMR);
+ } else
+ apic_clear_vector(vector, apic->regs + APIC_TMR);
+
result = !apic_test_and_set_irr(vector, apic);
trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
trig_mode, vector, !result);
break;
}
- if (trig_mode) {
- apic_debug("level trig mode for vector %d", vector);
- apic_set_vector(vector, apic->regs + APIC_TMR);
- } else
- apic_clear_vector(vector, apic->regs + APIC_TMR);
kvm_vcpu_kick(vcpu);
break;
hrtimer_cancel(&apic->lapic_timer.timer);
update_divide_count(apic);
start_apic_timer(apic);
+ apic->irr_pending = true;
}
void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
addr = gfn_to_hva(kvm, gfn);
if (kvm_is_error_hva(addr))
- return page_size;
+ return PT_PAGE_TABLE_LEVEL;
down_read(¤t->mm->mmap_sem);
vma = find_vma(current->mm, addr);
if (host_level == PT_PAGE_TABLE_LEVEL)
return host_level;
- for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) {
-
+ for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level)
if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
break;
- }
return level - 1;
}
walker->table_gfn[walker->level - 1] = table_gfn;
walker->pte_gpa[walker->level - 1] = pte_gpa;
- kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
+ if (kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte)))
+ goto not_present;
+
trace_kvm_mmu_paging_element(pte, walker->level);
if (!is_present_gpte(pte))
static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
{
struct kvm_shadow_walk_iterator iterator;
- pt_element_t gpte;
- gpa_t pte_gpa = -1;
int level;
u64 *sptep;
int need_flush = 0;
if (level == PT_PAGE_TABLE_LEVEL ||
((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
- struct kvm_mmu_page *sp = page_header(__pa(sptep));
-
- pte_gpa = (sp->gfn << PAGE_SHIFT);
- pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t);
if (is_shadow_present_pte(*sptep)) {
rmap_remove(vcpu->kvm, sptep);
if (need_flush)
kvm_flush_remote_tlbs(vcpu->kvm);
spin_unlock(&vcpu->kvm->mmu_lock);
-
- if (pte_gpa == -1)
- return;
- if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
- sizeof(pt_element_t)))
- return;
- if (is_present_gpte(gpte) && (gpte & PT_ACCESSED_MASK)) {
- if (mmu_topup_memory_caches(vcpu))
- return;
- kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte,
- sizeof(pt_element_t), 0);
- }
}
static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
events->sipi_vector = vcpu->arch.sipi_vector;
- events->flags = 0;
+ events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING
+ | KVM_VCPUEVENT_VALID_SIPI_VECTOR);
vcpu_put(vcpu);
}
static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events)
{
- if (events->flags)
+ if (events->flags & ~(KVM_VCPUEVENT_VALID_NMI_PENDING
+ | KVM_VCPUEVENT_VALID_SIPI_VECTOR))
return -EINVAL;
vcpu_load(vcpu);
kvm_pic_clear_isr_ack(vcpu->kvm);
vcpu->arch.nmi_injected = events->nmi.injected;
- vcpu->arch.nmi_pending = events->nmi.pending;
+ if (events->flags & KVM_VCPUEVENT_VALID_NMI_PENDING)
+ vcpu->arch.nmi_pending = events->nmi.pending;
kvm_x86_ops->set_nmi_mask(vcpu, events->nmi.masked);
- vcpu->arch.sipi_vector = events->sipi_vector;
+ if (events->flags & KVM_VCPUEVENT_VALID_SIPI_VECTOR)
+ vcpu->arch.sipi_vector = events->sipi_vector;
vcpu_put(vcpu);
GFP_KERNEL);
if (!vcpu->arch.mce_banks) {
r = -ENOMEM;
- goto fail_mmu_destroy;
+ goto fail_free_lapic;
}
vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
return 0;
-
+fail_free_lapic:
+ kvm_free_lapic(vcpu);
fail_mmu_destroy:
kvm_mmu_destroy(vcpu);
fail_free_pio_data:
void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
{
+ kfree(vcpu->arch.mce_banks);
kvm_free_lapic(vcpu);
down_read(&vcpu->kvm->slots_lock);
kvm_mmu_destroy(vcpu);
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
- );
+ totalhigh_pages << (PAGE_SHIFT-10));
printk(KERN_INFO "virtual kernel memory layout:\n"
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
switch (e->type) {
case KMEMCHECK_ERROR_INVALID_ACCESS:
- printk(KERN_ERR "WARNING: kmemcheck: Caught %d-bit read "
- "from %s memory (%p)\n",
+ printk(KERN_WARNING "WARNING: kmemcheck: Caught %d-bit read from %s memory (%p)\n",
8 * e->size, e->state < ARRAY_SIZE(desc) ?
desc[e->state] : "(invalid shadow state)",
(void *) e->address);
- printk(KERN_INFO);
+ printk(KERN_WARNING);
for (i = 0; i < SHADOW_COPY_SIZE; ++i)
- printk("%02x", e->memory_copy[i]);
- printk("\n");
+ printk(KERN_CONT "%02x", e->memory_copy[i]);
+ printk(KERN_CONT "\n");
- printk(KERN_INFO);
+ printk(KERN_WARNING);
for (i = 0; i < SHADOW_COPY_SIZE; ++i) {
if (e->shadow_copy[i] < ARRAY_SIZE(short_desc))
- printk(" %c", short_desc[e->shadow_copy[i]]);
+ printk(KERN_CONT " %c", short_desc[e->shadow_copy[i]]);
else
- printk(" ?");
+ printk(KERN_CONT " ?");
}
- printk("\n");
- printk(KERN_INFO "%*c\n", 2 + 2
+ printk(KERN_CONT "\n");
+ printk(KERN_WARNING "%*c\n", 2 + 2
* (int) (e->address & (SHADOW_COPY_SIZE - 1)), '^');
break;
case KMEMCHECK_ERROR_BUG:
kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args)
{
struct die_args *arg = args;
+ unsigned long* dr6_p = (unsigned long *)ERR_PTR(arg->err);
- if (val == DIE_DEBUG && (arg->err & DR_STEP))
- if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+ if (val == DIE_DEBUG && (*dr6_p & DR_STEP))
+ if (post_kmmio_handler(*dr6_p, arg->regs) == 1) {
/*
* Reset the BS bit in dr6 (pointed by args->err) to
* denote completion of processing
*/
- (*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
+ *dr6_p &= ~DR_STEP;
return NOTIFY_STOP;
}
printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
}
- if (changed)
+ if (changed) {
+ node_set(node, cpu_nodes_parsed);
printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
nd->start, nd->end);
+ }
}
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
obj-y += common.o early.o
obj-y += amd_bus.o
-obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o
+obj-$(CONFIG_X86_64) += bus_numa.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
}
}
-void __init update_res(struct pci_root_info *info, size_t start,
+void __devinit update_res(struct pci_root_info *info, size_t start,
size_t end, unsigned long flags, int merge)
{
int i;
+++ /dev/null
-/*
- * to read io range from IOH pci conf, need to do it after mmconfig is there
- */
-
-#include <linux/delay.h>
-#include <linux/dmi.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/pci_x86.h>
-
-#include "bus_numa.h"
-
-static inline void print_ioh_resources(struct pci_root_info *info)
-{
- int res_num;
- int busnum;
- int i;
-
- printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n",
- info->bus_min, info->bus_max);
- res_num = info->res_num;
- busnum = info->bus_min;
- for (i = 0; i < res_num; i++) {
- struct resource *res;
-
- res = &info->res[i];
- printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
- busnum, i,
- (res->flags & IORESOURCE_IO) ? "io port" :
- "mmio",
- res->start, res->end);
- }
-}
-
-#define IOH_LIO 0x108
-#define IOH_LMMIOL 0x10c
-#define IOH_LMMIOH 0x110
-#define IOH_LMMIOH_BASEU 0x114
-#define IOH_LMMIOH_LIMITU 0x118
-#define IOH_LCFGBUS 0x11c
-
-static void __devinit pci_root_bus_res(struct pci_dev *dev)
-{
- u16 word;
- u32 dword;
- struct pci_root_info *info;
- u16 io_base, io_end;
- u32 mmiol_base, mmiol_end;
- u64 mmioh_base, mmioh_end;
- int bus_base, bus_end;
-
- if (pci_root_num >= PCI_ROOT_NR) {
- printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
- return;
- }
-
- info = &pci_root_info[pci_root_num];
- pci_root_num++;
-
- pci_read_config_word(dev, IOH_LCFGBUS, &word);
- bus_base = (word & 0xff);
- bus_end = (word & 0xff00) >> 8;
- sprintf(info->name, "PCI Bus #%02x", bus_base);
- info->bus_min = bus_base;
- info->bus_max = bus_end;
-
- pci_read_config_word(dev, IOH_LIO, &word);
- io_base = (word & 0xf0) << (12 - 4);
- io_end = (word & 0xf000) | 0xfff;
- update_res(info, io_base, io_end, IORESOURCE_IO, 0);
-
- pci_read_config_dword(dev, IOH_LMMIOL, &dword);
- mmiol_base = (dword & 0xff00) << (24 - 8);
- mmiol_end = (dword & 0xff000000) | 0xffffff;
- update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0);
-
- pci_read_config_dword(dev, IOH_LMMIOH, &dword);
- mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10);
- mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff);
- pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword);
- mmioh_base |= ((u64)(dword & 0x7ffff)) << 32;
- pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword);
- mmioh_end |= ((u64)(dword & 0x7ffff)) << 32;
- update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0);
-
- print_ioh_resources(info);
-}
-
-/* intel IOH */
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res);
od_sver = 19;
}
-/^GNU/ {
- split($3, ver, ".");
+/^GNU objdump/ {
+ verstr = ""
+ for (i = 3; i <= NF; i++)
+ if (match($(i), "^[0-9]")) {
+ verstr = $(i);
+ break;
+ }
+ if (verstr == "") {
+ printf("Warning: Failed to find objdump version number.\n");
+ exit 0;
+ }
+ split(verstr, ver, ".");
if (ver[1] > od_ver ||
(ver[1] == od_ver && ver[2] >= od_sver)) {
exit 1;
} else {
printf("Warning: objdump version %s is older than %d.%d\n",
- $4, od_ver, od_sver);
+ verstr, od_ver, od_sver);
print("Warning: Skipping posttest.");
# Logic is inverted, because we just skip test without error.
exit 0;
/* keep using Xen gdt for now; no urgent need to change it */
+#ifdef CONFIG_X86_32
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
+#else
+ pv_info.kernel_rpl = 0;
+#endif
/* set the limit of our address space */
xen_reserve_top();
* our current implementations need. If we'll ever need
* more the interface will need revisiting.
*/
- page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ page = alloc_page(gfp_mask | __GFP_ZERO);
if (!page)
goto out_free_bio;
if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)
if (atomic_long_dec_and_test(&ioc->refcount)) {
rcu_read_lock();
- if (ioc->aic && ioc->aic->dtor)
- ioc->aic->dtor(ioc->aic);
cfq_dtor(ioc);
rcu_read_unlock();
task_unlock(task);
if (atomic_dec_and_test(&ioc->nr_tasks)) {
- if (ioc->aic && ioc->aic->exit)
- ioc->aic->exit(ioc->aic);
cfq_exit(ioc);
}
ret->ioprio = 0;
ret->last_waited = jiffies; /* doesn't matter... */
ret->nr_batch_requests = 0; /* because this is 0 */
- ret->aic = NULL;
INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH);
INIT_HLIST_HEAD(&ret->cic_list);
ret->ioc_data = NULL;
/**
* blk_stack_limits - adjust queue_limits for stacked devices
- * @t: the stacking driver limits (top)
- * @b: the underlying queue limits (bottom)
+ * @t: the stacking driver limits (top device)
+ * @b: the underlying queue limits (bottom, component device)
* @offset: offset to beginning of data within component device
*
* Description:
- * Merges two queue_limit structs. Returns 0 if alignment didn't
- * change. Returns -1 if adding the bottom device caused
- * misalignment.
+ * This function is used by stacking drivers like MD and DM to ensure
+ * that all component devices have compatible block sizes and
+ * alignments. The stacking driver must provide a queue_limits
+ * struct (top) and then iteratively call the stacking function for
+ * all component (bottom) devices. The stacking function will
+ * attempt to combine the values and ensure proper alignment.
+ *
+ * Returns 0 if the top and bottom queue_limits are compatible. The
+ * top device's block sizes and alignment offsets may be adjusted to
+ * ensure alignment with the bottom device. If no compatible sizes
+ * and alignments exist, -1 is returned and the resulting top
+ * queue_limits will have the misaligned flag set to indicate that
+ * the alignment_offset is undefined.
*/
int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
sector_t offset)
{
- int ret;
-
- ret = 0;
+ sector_t alignment;
+ unsigned int top, bottom, ret = 0;
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
+ t->misaligned |= b->misaligned;
+
+ alignment = queue_limit_alignment_offset(b, offset);
+
+ /* Bottom device has different alignment. Check that it is
+ * compatible with the current top alignment.
+ */
+ if (t->alignment_offset != alignment) {
+
+ top = max(t->physical_block_size, t->io_min)
+ + t->alignment_offset;
+ bottom = max(b->physical_block_size, b->io_min) + alignment;
+
+ /* Verify that top and bottom intervals line up */
+ if (max(top, bottom) & (min(top, bottom) - 1)) {
+ t->misaligned = 1;
+ ret = -1;
+ }
+ }
+
t->logical_block_size = max(t->logical_block_size,
b->logical_block_size);
b->physical_block_size);
t->io_min = max(t->io_min, b->io_min);
+ t->io_opt = lcm(t->io_opt, b->io_opt);
+
t->no_cluster |= b->no_cluster;
t->discard_zeroes_data &= b->discard_zeroes_data;
- /* Bottom device offset aligned? */
- if (offset &&
- (offset & (b->physical_block_size - 1)) != b->alignment_offset) {
+ /* Physical block size a multiple of the logical block size? */
+ if (t->physical_block_size & (t->logical_block_size - 1)) {
+ t->physical_block_size = t->logical_block_size;
t->misaligned = 1;
ret = -1;
}
- /*
- * Temporarily disable discard granularity. It's currently buggy
- * since we default to 0 for discard_granularity, hence this
- * "failure" will always trigger for non-zero offsets.
- */
-#if 0
- if (offset &&
- (offset & (b->discard_granularity - 1)) != b->discard_alignment) {
- t->discard_misaligned = 1;
+ /* Minimum I/O a multiple of the physical block size? */
+ if (t->io_min & (t->physical_block_size - 1)) {
+ t->io_min = t->physical_block_size;
+ t->misaligned = 1;
ret = -1;
}
-#endif
- /* If top has no alignment offset, inherit from bottom */
- if (!t->alignment_offset)
- t->alignment_offset =
- b->alignment_offset & (b->physical_block_size - 1);
+ /* Optimal I/O a multiple of the physical block size? */
+ if (t->io_opt & (t->physical_block_size - 1)) {
+ t->io_opt = 0;
+ t->misaligned = 1;
+ ret = -1;
+ }
- if (!t->discard_alignment)
- t->discard_alignment =
- b->discard_alignment & (b->discard_granularity - 1);
+ /* Find lowest common alignment_offset */
+ t->alignment_offset = lcm(t->alignment_offset, alignment)
+ & (max(t->physical_block_size, t->io_min) - 1);
- /* Top device aligned on logical block boundary? */
+ /* Verify that new alignment_offset is on a logical block boundary */
if (t->alignment_offset & (t->logical_block_size - 1)) {
t->misaligned = 1;
ret = -1;
}
- /* Find lcm() of optimal I/O size and granularity */
- t->io_opt = lcm(t->io_opt, b->io_opt);
- t->discard_granularity = lcm(t->discard_granularity,
- b->discard_granularity);
-
- /* Verify that optimal I/O size is a multiple of io_min */
- if (t->io_min && t->io_opt % t->io_min)
- ret = -1;
+ /* Discard alignment and granularity */
+ if (b->discard_granularity) {
+ unsigned int granularity = b->discard_granularity;
+ offset &= granularity - 1;
+
+ alignment = (granularity + b->discard_alignment - offset)
+ & (granularity - 1);
+
+ if (t->discard_granularity != 0 &&
+ t->discard_alignment != alignment) {
+ top = t->discard_granularity + t->discard_alignment;
+ bottom = b->discard_granularity + alignment;
+
+ /* Verify that top and bottom intervals line up */
+ if (max(top, bottom) & (min(top, bottom) - 1))
+ t->discard_misaligned = 1;
+ }
+
+ t->max_discard_sectors = min_not_zero(t->max_discard_sectors,
+ b->max_discard_sectors);
+ t->discard_granularity = max(t->discard_granularity,
+ b->discard_granularity);
+ t->discard_alignment = lcm(t->discard_alignment, alignment) &
+ (t->discard_granularity - 1);
+ }
return ret;
}
EXPORT_SYMBOL(blk_stack_limits);
+/**
+ * bdev_stack_limits - adjust queue limits for stacked drivers
+ * @t: the stacking driver limits (top device)
+ * @bdev: the component block_device (bottom)
+ * @start: first data sector within component device
+ *
+ * Description:
+ * Merges queue limits for a top device and a block_device. Returns
+ * 0 if alignment didn't change. Returns -1 if adding the bottom
+ * device caused misalignment.
+ */
+int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+ sector_t start)
+{
+ struct request_queue *bq = bdev_get_queue(bdev);
+
+ start += get_start_sect(bdev);
+
+ return blk_stack_limits(t, &bq->limits, start << 9);
+}
+EXPORT_SYMBOL(bdev_stack_limits);
+
/**
* disk_stack_limits - adjust queue limits for stacked drivers
* @disk: MD/DM gendisk (top)
/* Root service tree for cfq_groups */
struct cfq_rb_root grp_service_tree;
struct cfq_group root_group;
- /* Number of active cfq groups on group service tree */
- int nr_groups;
/*
* The priority currently being served
static struct cfq_rb_root *service_tree_for(struct cfq_group *cfqg,
enum wl_prio_t prio,
- enum wl_type_t type,
- struct cfq_data *cfqd)
+ enum wl_type_t type)
{
if (!cfqg)
return NULL;
__cfq_group_service_tree_add(st, cfqg);
cfqg->on_st = true;
- cfqd->nr_groups++;
st->total_weight += cfqg->weight;
}
cfq_log_cfqg(cfqd, cfqg, "del_from_rr group");
cfqg->on_st = false;
- cfqd->nr_groups--;
st->total_weight -= cfqg->weight;
if (!RB_EMPTY_NODE(&cfqg->rb_node))
cfq_rb_erase(&cfqg->rb_node, st);
#endif
service_tree = service_tree_for(cfqq->cfqg, cfqq_prio(cfqq),
- cfqq_type(cfqq), cfqd);
+ cfqq_type(cfqq));
if (cfq_class_idle(cfqq)) {
rb_key = CFQ_IDLE_DELAY;
parent = rb_last(&service_tree->rb);
struct cfq_io_context *cic;
struct cfq_queue *cfqq;
- /* Deny merge if bio and rq don't belong to same cfq group */
- if ((RQ_CFQQ(rq))->cfqg != cfq_get_cfqg(cfqd, 0))
- return false;
/*
* Disallow merge of a sync bio into an async request.
*/
{
struct cfq_rb_root *service_tree =
service_tree_for(cfqd->serving_group, cfqd->serving_prio,
- cfqd->serving_type, cfqd);
+ cfqd->serving_type);
if (!cfqd->rq_queued)
return NULL;
#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR)
static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- struct request *rq)
+ struct request *rq, bool for_preempt)
{
sector_t sdist = cfqq->seek_mean;
if (!sample_valid(cfqq->seek_samples))
sdist = CFQQ_SEEK_THR;
+ /* if seek_mean is big, using it as close criteria is meaningless */
+ if (sdist > CFQQ_SEEK_THR && !for_preempt)
+ sdist = CFQQ_SEEK_THR;
+
return cfq_dist_from_last(cfqd, rq) <= sdist;
}
* will contain the closest sector.
*/
__cfqq = rb_entry(parent, struct cfq_queue, p_node);
- if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
+ if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false))
return __cfqq;
if (blk_rq_pos(__cfqq->next_rq) < sector)
return NULL;
__cfqq = rb_entry(node, struct cfq_queue, p_node);
- if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
+ if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false))
return __cfqq;
return NULL;
}
static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd,
- struct cfq_group *cfqg, enum wl_prio_t prio,
- bool prio_changed)
+ struct cfq_group *cfqg, enum wl_prio_t prio)
{
struct cfq_queue *queue;
int i;
unsigned long lowest_key = 0;
enum wl_type_t cur_best = SYNC_NOIDLE_WORKLOAD;
- if (prio_changed) {
- /*
- * When priorities switched, we prefer starting
- * from SYNC_NOIDLE (first choice), or just SYNC
- * over ASYNC
- */
- if (service_tree_for(cfqg, prio, cur_best, cfqd)->count)
- return cur_best;
- cur_best = SYNC_WORKLOAD;
- if (service_tree_for(cfqg, prio, cur_best, cfqd)->count)
- return cur_best;
-
- return ASYNC_WORKLOAD;
- }
-
- for (i = 0; i < 3; ++i) {
- /* otherwise, select the one with lowest rb_key */
- queue = cfq_rb_first(service_tree_for(cfqg, prio, i, cfqd));
+ for (i = 0; i <= SYNC_WORKLOAD; ++i) {
+ /* select the one with lowest rb_key */
+ queue = cfq_rb_first(service_tree_for(cfqg, prio, i));
if (queue &&
(!key_valid || time_before(queue->rb_key, lowest_key))) {
lowest_key = queue->rb_key;
static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg)
{
- enum wl_prio_t previous_prio = cfqd->serving_prio;
- bool prio_changed;
unsigned slice;
unsigned count;
struct cfq_rb_root *st;
* (SYNC, SYNC_NOIDLE, ASYNC), and to compute a workload
* expiration time
*/
- prio_changed = (cfqd->serving_prio != previous_prio);
- st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type,
- cfqd);
+ st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type);
count = st->count;
/*
- * If priority didn't change, check workload expiration,
- * and that we still have other queues ready
+ * check workload expiration, and that we still have other queues ready
*/
- if (!prio_changed && count &&
- !time_after(jiffies, cfqd->workload_expires))
+ if (count && !time_after(jiffies, cfqd->workload_expires))
return;
/* otherwise select new workload type */
cfqd->serving_type =
- cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio, prio_changed);
- st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type,
- cfqd);
+ cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio);
+ st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type);
count = st->count;
/*
if (cfq_class_idle(cfqq))
return true;
+ /*
+ * Don't allow a non-RT request to preempt an ongoing RT cfqq timeslice.
+ */
+ if (cfq_class_rt(cfqq) && !cfq_class_rt(new_cfqq))
+ return false;
+
/*
* if the new request is sync, but the currently running queue is
* not, let the sync request have priority.
* if this request is as-good as one we would expect from the
* current cfqq, let it preempt
*/
- if (cfq_rq_close(cfqd, cfqq, rq))
+ if (cfq_rq_close(cfqd, cfqq, rq, true))
return true;
return false;
{
struct gendisk *disk = dev_to_disk(dev);
- return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue));
+ return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
}
static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
err += test(4, &tests);
if (NDISKS > 5)
err += test(5, &tests);
+ /* the 11 and 12 disk cases are special for ioatdma (p-disabled
+ * q-continuation without extended descriptor)
+ */
+ if (NDISKS > 12) {
+ err += test(11, &tests);
+ err += test(12, &tests);
+ }
err += test(NDISKS, &tests);
pr("\n");
source "drivers/message/fusion/Kconfig"
-source "drivers/ieee1394/Kconfig"
+source "drivers/firewire/Kconfig"
source "drivers/message/i2o/Kconfig"
* the mechanism only works when all CPUs have RT task running,
* as if one CPU hasn't RT task, RT task from other CPUs will
* borrow CPU time from this CPU and cause RT task use > 95%
- * CPU time. To make 'avoid staration' work, takes a nap here.
+ * CPU time. To make 'avoid starvation' work, takes a nap here.
*/
if (do_sleep)
schedule_timeout_killable(HZ * idle_pct / 100);
static unsigned int ps_tsk_num;
static int create_power_saving_task(void)
{
+ int rc = -ENOMEM;
+
ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
(void *)(unsigned long)ps_tsk_num,
"power_saving/%d", ps_tsk_num);
- if (ps_tsks[ps_tsk_num]) {
+ rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
+ if (!rc)
ps_tsk_num++;
- return 0;
- }
- return -EINVAL;
+ else
+ ps_tsks[ps_tsk_num] = NULL;
+
+ return rc;
}
static void destroy_power_saving_task(void)
if (ps_tsk_num > 0) {
ps_tsk_num--;
kthread_stop(ps_tsks[ps_tsk_num]);
+ ps_tsks[ps_tsk_num] = NULL;
}
}
}
}
-static int acpi_pad_idle_cpus(unsigned int num_cpus)
+static void acpi_pad_idle_cpus(unsigned int num_cpus)
{
get_online_cpus();
set_power_saving_task_num(num_cpus);
put_online_cpus();
- return 0;
}
static uint32_t acpi_pad_idle_cpus_num(void)
static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- acpi_status status;
union acpi_object *package;
int rev, num, ret = -EINVAL;
- status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer)))
+ return -EINVAL;
+
+ if (!buffer.length || !buffer.pointer)
return -EINVAL;
+
package = buffer.pointer;
if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
goto out;
rev = package->package.elements[0].integer.value;
num = package->package.elements[1].integer.value;
- if (rev != 1)
+ if (rev != 1 || num < 0)
goto out;
*num_cpus = num;
ret = 0;
static void acpi_pad_handle_notify(acpi_handle handle)
{
- int num_cpus, ret;
+ int num_cpus;
uint32_t idle_cpus;
mutex_lock(&isolated_cpus_lock);
mutex_unlock(&isolated_cpus_lock);
return;
}
- ret = acpi_pad_idle_cpus(num_cpus);
+ acpi_pad_idle_cpus(num_cpus);
idle_cpus = acpi_pad_idle_cpus_num();
- if (!ret)
- acpi_pad_ost(handle, 0, idle_cpus);
- else
- acpi_pad_ost(handle, 1, 0);
+ acpi_pad_ost(handle, 0, idle_cpus);
mutex_unlock(&isolated_cpus_lock);
}
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */
-#ifdef CONFIG_ACPI_PROCESSOR_AGGREGATOR
+#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\
+ defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT;
#endif
+
+#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE)
+ capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
+#endif
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
return;
if (ACPI_SUCCESS(acpi_run_osc(handle, &context)))
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
-static void acpi_ec_gpe_query(void *ec_cxt);
+static int acpi_ec_sync_query(struct acpi_ec *ec);
-static int ec_check_sci(struct acpi_ec *ec, u8 state)
+static int ec_check_sci_sync(struct acpi_ec *ec, u8 state)
{
if (state & ACPI_EC_FLAG_SCI) {
if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
- return acpi_os_execute(OSL_EC_BURST_HANDLER,
- acpi_ec_gpe_query, ec);
+ return acpi_ec_sync_query(ec);
}
return 0;
}
{
unsigned long tmp;
int ret = 0;
- pr_debug(PREFIX "transaction start\n");
- /* disable GPE during transaction if storm is detected */
- if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- acpi_disable_gpe(NULL, ec->gpe);
- }
if (EC_FLAGS_MSI)
udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->curr_lock, tmp);
ret = ec_poll(ec);
- pr_debug(PREFIX "transaction end\n");
spin_lock_irqsave(&ec->curr_lock, tmp);
ec->curr = NULL;
spin_unlock_irqrestore(&ec->curr_lock, tmp);
- if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- /* check if we received SCI during transaction */
- ec_check_sci(ec, acpi_ec_read_status(ec));
- /* it is safe to enable GPE outside of transaction */
- acpi_enable_gpe(NULL, ec->gpe);
- } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
- pr_info(PREFIX "GPE storm detected, "
- "transactions will use polling mode\n");
- set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
- }
return ret;
}
status = -ETIME;
goto end;
}
+ pr_debug(PREFIX "transaction start\n");
+ /* disable GPE during transaction if storm is detected */
+ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+ acpi_disable_gpe(NULL, ec->gpe);
+ }
+
status = acpi_ec_transaction_unlocked(ec, t);
+
+ /* check if we received SCI during transaction */
+ ec_check_sci_sync(ec, acpi_ec_read_status(ec));
+ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+ msleep(1);
+ /* it is safe to enable GPE outside of transaction */
+ acpi_enable_gpe(NULL, ec->gpe);
+ } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+ pr_info(PREFIX "GPE storm detected, "
+ "transactions will use polling mode\n");
+ set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
+ }
+ pr_debug(PREFIX "transaction end\n");
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
EXPORT_SYMBOL(ec_transaction);
-static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
+static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
{
int result;
u8 d;
.wlen = 0, .rlen = 1};
if (!ec || !data)
return -EINVAL;
-
/*
* Query the EC to find out which _Qxx method we need to evaluate.
* Note that successful completion of the query causes the ACPI_EC_SCI
* bit to be cleared (and thus clearing the interrupt source).
*/
-
- result = acpi_ec_transaction(ec, &t);
+ result = acpi_ec_transaction_unlocked(ec, &t);
if (result)
return result;
-
if (!d)
return -ENODATA;
-
*data = d;
return 0;
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
-static void acpi_ec_gpe_query(void *ec_cxt)
+static void acpi_ec_run(void *cxt)
{
- struct acpi_ec *ec = ec_cxt;
- u8 value = 0;
- struct acpi_ec_query_handler *handler, copy;
-
- if (!ec || acpi_ec_query(ec, &value))
+ struct acpi_ec_query_handler *handler = cxt;
+ if (!handler)
return;
- mutex_lock(&ec->lock);
+ pr_debug(PREFIX "start query execution\n");
+ if (handler->func)
+ handler->func(handler->data);
+ else if (handler->handle)
+ acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
+ pr_debug(PREFIX "stop query execution\n");
+ kfree(handler);
+}
+
+static int acpi_ec_sync_query(struct acpi_ec *ec)
+{
+ u8 value = 0;
+ int status;
+ struct acpi_ec_query_handler *handler, *copy;
+ if ((status = acpi_ec_query_unlocked(ec, &value)))
+ return status;
list_for_each_entry(handler, &ec->list, node) {
if (value == handler->query_bit) {
/* have custom handler for this bit */
- memcpy(©, handler, sizeof(copy));
- mutex_unlock(&ec->lock);
- if (copy.func) {
- copy.func(copy.data);
- } else if (copy.handle) {
- acpi_evaluate_object(copy.handle, NULL, NULL, NULL);
- }
- return;
+ copy = kmalloc(sizeof(*handler), GFP_KERNEL);
+ if (!copy)
+ return -ENOMEM;
+ memcpy(copy, handler, sizeof(*copy));
+ pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value);
+ return acpi_os_execute((copy->func) ?
+ OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER,
+ acpi_ec_run, copy);
}
}
+ return 0;
+}
+
+static void acpi_ec_gpe_query(void *ec_cxt)
+{
+ struct acpi_ec *ec = ec_cxt;
+ if (!ec)
+ return;
+ mutex_lock(&ec->lock);
+ acpi_ec_sync_query(ec);
mutex_unlock(&ec->lock);
}
+static void acpi_ec_gpe_query(void *ec_cxt);
+
+static int ec_check_sci(struct acpi_ec *ec, u8 state)
+{
+ if (state & ACPI_EC_FLAG_SCI) {
+ if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
+ pr_debug(PREFIX "push gpe query to the queue\n");
+ return acpi_os_execute(OSL_NOTIFY_HANDLER,
+ acpi_ec_gpe_query, ec);
+ }
+ }
+ return 0;
+}
+
static u32 acpi_ec_gpe_handler(void *data)
{
struct acpi_ec *ec = data;
- u8 status;
pr_debug(PREFIX "~~~> interrupt\n");
- status = acpi_ec_read_status(ec);
- advance_transaction(ec, status);
- if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
+ advance_transaction(ec, acpi_ec_read_status(ec));
+ if (ec_transaction_done(ec) &&
+ (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
wake_up(&ec->wait);
- ec_check_sci(ec, status);
+ ec_check_sci(ec, acpi_ec_read_status(ec));
+ }
return ACPI_INTERRUPT_HANDLED;
}
static int acpi_pci_link_add(struct acpi_device *device);
static int acpi_pci_link_remove(struct acpi_device *device, int type);
-static struct acpi_device_id link_device_ids[] = {
+static const struct acpi_device_id link_device_ids[] = {
{"PNP0C0F", 0},
{"", 0},
};
static int acpi_pci_root_remove(struct acpi_device *device, int type);
static int acpi_pci_root_start(struct acpi_device *device);
-static struct acpi_device_id root_device_ids[] = {
+static const struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
static int acpi_power_resume(struct acpi_device *device);
static int acpi_power_open_fs(struct inode *inode, struct file *file);
-static struct acpi_device_id power_device_ids[] = {
+static const struct acpi_device_id power_device_ids[] = {
{ACPI_POWER_HID, 0},
{"", 0},
};
return force_cap_on || cap_in_hardware;
}
-static struct acpi_device_id power_meter_ids[] = {
+static const struct acpi_device_id power_meter_ids[] = {
{"ACPI000D", 0},
{"", 0},
};
kfree(resource->domain_devices);
kobject_put(resource->holders_dir);
+ resource->num_domain_devices = 0;
}
static int read_domain_devices(struct acpi_power_meter_resource *resource)
return res;
error:
- remove_domain_devices(resource);
remove_attrs(resource);
return res;
}
pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
+ /*
+ * FADT specified C2 latency must be less than or equal to
+ * 100 microseconds.
+ */
+ if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency));
+ /* invalidate C2 */
+ pr->power.states[ACPI_STATE_C2].address = 0;
+ }
+
+ /*
+ * FADT supplied C3 latency must be less than or equal to
+ * 1000 microseconds.
+ */
+ if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency));
+ /* invalidate C3 */
+ pr->power.states[ACPI_STATE_C3].address = 0;
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"lvl2[0x%08x] lvl3[0x%08x]\n",
pr->power.states[ACPI_STATE_C2].address,
return status;
}
-static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
-{
-
- if (!cx->address)
- return;
-
- /*
- * C2 latency must be less than or equal to 100
- * microseconds.
- */
- else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "latency too large [%d]\n", cx->latency));
- return;
- }
-
- /*
- * Otherwise we've met all of our C2 requirements.
- * Normalize the C2 latency to expidite policy
- */
- cx->valid = 1;
-
- cx->latency_ticks = cx->latency;
-
- return;
-}
-
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
if (!cx->address)
return;
- /*
- * C3 latency must be less than or equal to 1000
- * microseconds.
- */
- else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "latency too large [%d]\n", cx->latency));
- return;
- }
-
/*
* PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
* DMA transfers are used by any ISA device to avoid livelock.
break;
case ACPI_STATE_C2:
- acpi_processor_power_verify_c2(cx);
+ if (!cx->address)
+ break;
+ cx->valid = 1;
+ cx->latency_ticks = cx->latency; /* Normalize latency */
break;
case ACPI_STATE_C3:
}
EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
+static int early_pdc_optin;
+static int set_early_pdc_optin(const struct dmi_system_id *id)
+{
+ early_pdc_optin = 1;
+ return 0;
+}
+
+static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
+ {
+ set_early_pdc_optin, "HP Envy", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL},
+ {
+ set_early_pdc_optin, "HP Pavilion dv6", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL},
+ {
+ set_early_pdc_optin, "HP Pavilion dv7", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL},
+ {},
+};
+
static acpi_status
early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
{
return AE_OK;
}
-void acpi_early_processor_set_pdc(void)
+void __init acpi_early_processor_set_pdc(void)
{
/*
* Check whether the system is DMI table. If yes, OSPM
*/
dmi_check_system(processor_idle_dmi_table);
+ /*
+ * Allow systems to opt-in to early _PDC evaluation.
+ */
+ dmi_check_system(early_pdc_optin_table);
+ if (!early_pdc_optin)
+ return;
+
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
-
+ struct acpi_processor *pr = seq->private;
if (!pr)
goto end;
static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
{
+#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER)
struct acpi_battery *battery = &sbs->battery[id];
+#endif
+
#ifdef CONFIG_ACPI_SYSFS_POWER
if (battery->bat.dev) {
if (battery->have_sysfs_alarm)
case ACPI_SBS_CHARGER:
case ACPI_SBS_MANAGER:
case ACPI_SBS_BATTERY:
- acpi_os_execute(OSL_GPE_HANDLER,
+ acpi_os_execute(OSL_NOTIFY_HANDLER,
acpi_smbus_callback, hc);
default:;
}
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
+void __init acpi_set_sci_en_on_resume(void)
+{
+ set_sci_en_on_resume = true;
+}
+
/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
#endif /* CONFIG_ACPI_SLEEP */
#ifdef CONFIG_SUSPEND
-/*
- * According to the ACPI specification the BIOS should make sure that ACPI is
- * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
- * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
- * on such systems during resume. Unfortunately that doesn't help in
- * particularly pathological cases in which SCI_EN has to be set directly on
- * resume, although the specification states very clearly that this flag is
- * owned by the hardware. The set_sci_en_on_resume variable will be set in such
- * cases.
- */
-static bool set_sci_en_on_resume;
-
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
static int brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
+/*
+ * By default, we don't allow duplicate ACPI video bus devices
+ * under the same VGA controller
+ */
+static int allow_duplicates;
+module_param(allow_duplicates, bool, 0644);
+
static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
sprintf(name, "acpi_video%d", count++);
device->backlight = backlight_device_register(name,
NULL, device, &acpi_backlight_ops);
- device->backlight->props.max_brightness = device->brightness->count-3;
kfree(name);
+ if (IS_ERR(device->backlight))
+ return;
+ device->backlight->props.max_brightness = device->brightness->count-3;
result = sysfs_create_link(&device->backlight->dev.kobj,
&device->dev->dev.kobj, "device");
unsigned long long level_current, level_next;
int result = -EINVAL;
+ /* no warning message if acpi_backlight=vendor is used */
+ if (!acpi_video_backlight_support())
+ return 0;
+
if (!device->brightness)
goto out;
return AE_OK;
}
+static acpi_status
+acpi_video_bus_match(acpi_handle handle, u32 level, void *context,
+ void **return_value)
+{
+ struct acpi_device *device = context;
+ struct acpi_device *sibling;
+ int result;
+
+ if (handle == device->handle)
+ return AE_CTRL_TERMINATE;
+
+ result = acpi_bus_get_device(handle, &sibling);
+ if (result)
+ return AE_OK;
+
+ if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME))
+ return AE_ALREADY_EXISTS;
+
+ return AE_OK;
+}
+
static int acpi_video_bus_add(struct acpi_device *device)
{
struct acpi_video_bus *video;
struct input_dev *input;
int error;
+ acpi_status status;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE,
+ device->parent->handle, 1,
+ acpi_video_bus_match, NULL,
+ device, NULL);
+ if (status == AE_ALREADY_EXISTS) {
+ printk(KERN_WARNING FW_BUG
+ "Duplicate ACPI video bus devices for the"
+ " same VGA controller, please try module "
+ "parameter \"video.allow_duplicates=1\""
+ "if the current driver doesn't work.\n");
+ if (!allow_duplicates)
+ return -ENODEV;
+ }
video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
if (!video)
};
static struct ata_port_operations piix_sata_ops = {
- .inherits = &ata_bmdma_port_ops,
+ .inherits = &ata_bmdma32_port_ops,
};
static struct ata_port_operations piix_sidpr_sata_ops = {
int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
+ int tries = ATA_LINK_RESUME_TRIES;
u32 scontrol, serror;
int rc;
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
return rc;
- scontrol = (scontrol & 0x0f0) | 0x300;
+ /*
+ * Writes to SControl sometimes get ignored under certain
+ * controllers (ata_piix SIDPR). Make sure DET actually is
+ * cleared.
+ */
+ do {
+ scontrol = (scontrol & 0x0f0) | 0x300;
+ if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+ return rc;
+ /*
+ * Some PHYs react badly if SStatus is pounded
+ * immediately after resuming. Delay 200ms before
+ * debouncing.
+ */
+ msleep(200);
- if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
- return rc;
+ /* is SControl restored correctly? */
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ return rc;
+ } while ((scontrol & 0xf0f) != 0x300 && --tries);
- /* Some PHYs react badly if SStatus is pounded immediately
- * after resuming. Delay 200ms before debouncing.
- */
- msleep(200);
+ if ((scontrol & 0xf0f) != 0x300) {
+ ata_link_printk(link, KERN_ERR,
+ "failed to resume link (SControl %X)\n",
+ scontrol);
+ return 0;
+ }
+
+ if (tries < ATA_LINK_RESUME_TRIES)
+ ata_link_printk(link, KERN_WARNING,
+ "link resume succeeded after %d retries\n",
+ ATA_LINK_RESUME_TRIES - tries);
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
/* determine whether the command is worth retrying */
- if (!(qc->err_mask & AC_ERR_INVALID) &&
- ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
+ if (qc->flags & ATA_QCFLAG_IO ||
+ (!(qc->err_mask & AC_ERR_INVALID) &&
+ qc->err_mask != AC_ERR_DEV))
qc->flags |= ATA_QCFLAG_RETRY;
/* accumulate error info */
if (port_status & PDC_DRIVE_ERR)
ac_err_mask |= AC_ERR_DEV;
if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
- ac_err_mask |= AC_ERR_HSM;
+ ac_err_mask |= AC_ERR_OTHER;
if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
ac_err_mask |= AC_ERR_ATA_BUS;
if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR
{
int err;
struct vfsmount *mnt;
+ char options[] = "mode=0755";
err = register_filesystem(&dev_fs_type);
if (err) {
return err;
}
- mnt = kern_mount_data(&dev_fs_type, "mode=0755");
+ mnt = kern_mount_data(&dev_fs_type, options);
if (IS_ERR(mnt)) {
err = PTR_ERR(mnt);
printk(KERN_ERR "devtmpfs: unable to create devtmpfs %i\n", err);
static ssize_t
print_block_size(struct class *class, char *buf)
{
- return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+ return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
}
static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
/**
* legacy_resume - Execute a legacy (bus or class) resume callback for device.
- * dev: Device to resume.
- * cb: Resume callback to execute.
+ * @dev: Device to resume.
+ * @cb: Resume callback to execute.
*/
static int legacy_resume(struct device *dev, int (*cb)(struct device *dev))
{
/**
* legacy_suspend - Execute a legacy (bus or class) suspend callback for device.
- * dev: Device to suspend.
- * cb: Suspend callback to execute.
+ * @dev: Device to suspend.
+ * @state: PM transition of the system being carried out.
+ * @cb: Suspend callback to execute.
*/
static int legacy_suspend(struct device *dev, pm_message_t state,
int (*cb)(struct device *dev, pm_message_t state))
static struct DAC960_privdata DAC960_LP_privdata = {
.HardwareType = DAC960_LP_Controller,
- .FirmwareType = DAC960_LP_Controller,
+ .FirmwareType = DAC960_V2_Controller,
.InterruptHandler = DAC960_LP_InterruptHandler,
.MemoryWindowSize = DAC960_LP_RegisterWindowSize,
};
part_stat_unlock();
}
-/*
- * Ensure we don't create aliases in VI caches
- */
-static inline void
-killalias(struct bio *bio)
-{
- struct bio_vec *bv;
- int i;
-
- if (bio_data_dir(bio) == READ)
- __bio_for_each_segment(bv, bio, i, 0) {
- flush_dcache_page(bv->bv_page);
- }
-}
-
void
aoecmd_ata_rsp(struct sk_buff *skb)
{
if (buf->flags & BUFFL_FAIL)
bio_endio(buf->bio, -EIO);
else {
- killalias(buf->bio);
+ bio_flush_dcache_pages(buf->bio);
bio_endio(buf->bio, 0);
}
mempool_free(buf, d->bufpool);
#
comment "DRBD disabled because PROC_FS, INET or CONNECTOR not selected"
- depends on !PROC_FS || !INET || !CONNECTOR
+ depends on PROC_FS='n' || INET='n' || CONNECTOR='n'
config BLK_DEV_DRBD
tristate "DRBD Distributed Replicated Block Device support"
#if DRBD_MAX_SECTORS_BM < DRBD_MAX_SECTORS_32
#define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_BM
#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_BM
-#elif !defined(CONFIG_LBD) && BITS_PER_LONG == 32
+#elif !defined(CONFIG_LBDAF) && BITS_PER_LONG == 32
#define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_32
#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32
#else
extern void drbd_suspend_io(struct drbd_conf *mdev);
extern void drbd_resume_io(struct drbd_conf *mdev);
extern char *ppsize(char *buf, unsigned long long size);
-extern sector_t drbd_new_dev_size(struct drbd_conf *,
- struct drbd_backing_dev *);
+extern sector_t drbd_new_dev_size(struct drbd_conf *, struct drbd_backing_dev *, int);
enum determine_dev_size { dev_size_error = -1, unchanged = 0, shrunk = 1, grew = 2 };
-extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *) __must_hold(local);
+extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *, int force) __must_hold(local);
extern void resync_after_online_grow(struct drbd_conf *);
extern void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int) __must_hold(local);
extern int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role,
/* drbd_proc.c */
extern struct proc_dir_entry *drbd_proc;
-extern struct file_operations drbd_proc_fops;
+extern const struct file_operations drbd_proc_fops;
extern const char *drbd_conn_str(enum drbd_conns s);
extern const char *drbd_role_str(enum drbd_role s);
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/drbd.h>
#include <asm/uaccess.h>
#include <asm/types.h>
DEFINE_RATELIMIT_STATE(drbd_ratelimit_state, 5 * HZ, 5);
-static struct block_device_operations drbd_ops = {
+static const struct block_device_operations drbd_ops = {
.owner = THIS_MODULE,
.open = drbd_open,
.release = drbd_release,
dev_err(DEV, "Sending state in drbd_io_error() failed\n");
}
+ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
lc_destroy(mdev->resync);
mdev->resync = NULL;
lc_destroy(mdev->act_log);
{
long refresh;
- if (--rsp->count < 0) {
+ if (!rsp->count--) {
get_random_bytes(&refresh, sizeof(refresh));
rsp->state += refresh;
rsp->count = FAULT_RANDOM_REFRESH;
* Returns 0 on success, negative return values indicate errors.
* You should call drbd_md_sync() after calling this function.
*/
-enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_hold(local)
+enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev, int force) __must_hold(local)
{
sector_t prev_first_sect, prev_size; /* previous meta location */
sector_t la_size;
/* TODO: should only be some assert here, not (re)init... */
drbd_md_set_sector_offsets(mdev, mdev->ldev);
- size = drbd_new_dev_size(mdev, mdev->ldev);
+ size = drbd_new_dev_size(mdev, mdev->ldev, force);
if (drbd_get_capacity(mdev->this_bdev) != size ||
drbd_bm_capacity(mdev) != size) {
}
sector_t
-drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
+drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev, int assume_peer_has_space)
{
sector_t p_size = mdev->p_size; /* partner's disk size. */
sector_t la_size = bdev->md.la_size_sect; /* last agreed size. */
m_size = drbd_get_max_capacity(bdev);
+ if (mdev->state.conn < C_CONNECTED && assume_peer_has_space) {
+ dev_warn(DEV, "Resize while not connected was forced by the user!\n");
+ p_size = m_size;
+ }
+
if (p_size && m_size) {
size = min_t(sector_t, p_size, m_size);
} else {
/* Prevent shrinking of consistent devices ! */
if (drbd_md_test_flag(nbc, MDF_CONSISTENT) &&
- drbd_new_dev_size(mdev, nbc) < nbc->md.la_size_sect) {
+ drbd_new_dev_size(mdev, nbc, 0) < nbc->md.la_size_sect) {
dev_warn(DEV, "refusing to truncate a consistent device\n");
retcode = ERR_DISK_TO_SMALL;
goto force_diskless_dec;
!drbd_md_test_flag(mdev->ldev, MDF_CONNECTED_IND))
set_bit(USE_DEGR_WFC_T, &mdev->flags);
- dd = drbd_determin_dev_size(mdev);
+ dd = drbd_determin_dev_size(mdev, 0);
if (dd == dev_size_error) {
retcode = ERR_NOMEM_BITMAP;
goto force_diskless_dec;
goto fail;
}
- if (crypto_tfm_alg_type(crypto_hash_tfm(tfm)) != CRYPTO_ALG_TYPE_SHASH) {
+ if (!drbd_crypto_is_hash(crypto_hash_tfm(tfm))) {
retcode = ERR_AUTH_ALG_ND;
goto fail;
}
}
mdev->ldev->dc.disk_size = (sector_t)rs.resize_size;
- dd = drbd_determin_dev_size(mdev);
+ dd = drbd_determin_dev_size(mdev, rs.resize_force);
drbd_md_sync(mdev);
put_ldev(mdev);
if (dd == dev_size_error) {
struct proc_dir_entry *drbd_proc;
-struct file_operations drbd_proc_fops = {
+const struct file_operations drbd_proc_fops = {
.owner = THIS_MODULE,
.open = drbd_proc_open,
.read = seq_read,
#include <asm/uaccess.h>
#include <net/sock.h>
-#include <linux/version.h>
#include <linux/drbd.h>
#include <linux/fs.h>
#include <linux/file.h>
if (mdev->cram_hmac_tfm) {
/* drbd_request_state(mdev, NS(conn, WFAuth)); */
- if (!drbd_do_auth(mdev)) {
+ switch (drbd_do_auth(mdev)) {
+ case -1:
dev_err(DEV, "Authentication of peer failed\n");
return -1;
+ case 0:
+ dev_err(DEV, "Authentication of peer failed, trying again.\n");
+ return 0;
}
}
case WO_bdev_flush:
case WO_drain_io:
- D_ASSERT(rv == FE_STILL_LIVE);
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
- drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
- rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+ if (rv == FE_STILL_LIVE) {
+ set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
+ drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
+ rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+ }
if (rv == FE_RECYCLED)
return TRUE;
/* Never shrink a device with usable data during connect.
But allow online shrinking if we are connected. */
- if (drbd_new_dev_size(mdev, mdev->ldev) <
+ if (drbd_new_dev_size(mdev, mdev->ldev, 0) <
drbd_get_capacity(mdev->this_bdev) &&
mdev->state.disk >= D_OUTDATED &&
mdev->state.conn < C_CONNECTED) {
#undef min_not_zero
if (get_ldev(mdev)) {
- dd = drbd_determin_dev_size(mdev);
+ dd = drbd_determin_dev_size(mdev, 0);
put_ldev(mdev);
if (dd == dev_size_error)
return FALSE;
{
dev_err(DEV, "This kernel was build without CONFIG_CRYPTO_HMAC.\n");
dev_err(DEV, "You need to disable 'cram-hmac-alg' in drbd.conf.\n");
- return 0;
+ return -1;
}
#else
#define CHALLENGE_LEN 64
+
+/* Return value:
+ 1 - auth succeeded,
+ 0 - failed, try again (network error),
+ -1 - auth failed, don't try again.
+*/
+
static int drbd_do_auth(struct drbd_conf *mdev)
{
char my_challenge[CHALLENGE_LEN]; /* 64 Bytes... */
(u8 *)mdev->net_conf->shared_secret, key_len);
if (rv) {
dev_err(DEV, "crypto_hash_setkey() failed with %d\n", rv);
- rv = 0;
+ rv = -1;
goto fail;
}
if (p.length > CHALLENGE_LEN*2) {
dev_err(DEV, "expected AuthChallenge payload too big.\n");
- rv = 0;
+ rv = -1;
goto fail;
}
peers_ch = kmalloc(p.length, GFP_NOIO);
if (peers_ch == NULL) {
dev_err(DEV, "kmalloc of peers_ch failed\n");
- rv = 0;
+ rv = -1;
goto fail;
}
response = kmalloc(resp_size, GFP_NOIO);
if (response == NULL) {
dev_err(DEV, "kmalloc of response failed\n");
- rv = 0;
+ rv = -1;
goto fail;
}
rv = crypto_hash_digest(&desc, &sg, sg.length, response);
if (rv) {
dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
- rv = 0;
+ rv = -1;
goto fail;
}
}
right_response = kmalloc(resp_size, GFP_NOIO);
- if (response == NULL) {
+ if (right_response == NULL) {
dev_err(DEV, "kmalloc of right_response failed\n");
- rv = 0;
+ rv = -1;
goto fail;
}
rv = crypto_hash_digest(&desc, &sg, sg.length, right_response);
if (rv) {
dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
- rv = 0;
+ rv = -1;
goto fail;
}
if (rv)
dev_info(DEV, "Peer authenticated using %d bytes of '%s' HMAC\n",
resp_size, mdev->net_conf->cram_hmac_alg);
+ else
+ rv = -1;
fail:
kfree(peers_ch);
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/drbd.h>
#include <linux/sched.h>
#include <linux/smp_lock.h>
#include <linux/mm_inline.h>
#include <linux/slab.h>
#include <linux/random.h>
-#include <linux/mm.h>
#include <linux/string.h>
#include <linux/scatterlist.h>
err = -EINVAL;
goto probe_err_2;
}
- host->dev_base = ioremap(rsc->start , rsc->end + 1);
+ host->dev_base = ioremap(rsc->start, resource_size(rsc));
if (!host->dev_base) {
printk(KERN_ERR "%s:%d ioremap fail\n",
__func__, __LINE__);
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
- depends on PPC_PSERIES
+ depends on PPC_PSERIES && HVC_CONSOLE
help
Partitionable IBM Power5 ppc64 machines allow hosting of
firmware virtual consoles from one Linux partition by
if (agp_off)
return -EINVAL;
+
+ if (gart_iommu_aperture)
+ return agp_bridges_found ? 0 : -ENODEV;
+
err = pci_register_driver(&agp_amd64_pci_driver);
if (err < 0)
return err;
static void __exit agp_amd64_cleanup(void)
{
+ if (gart_iommu_aperture)
+ return;
if (aperture_resource)
release_resource(aperture_resource);
pci_unregister_driver(&agp_amd64_pci_driver);
}
-/* On AMD64 the PCI driver needs to initialize this driver early
- for the IOMMU, so it has to be called via a backdoor. */
-#ifndef CONFIG_GART_IOMMU
module_init(agp_amd64_init);
module_exit(agp_amd64_cleanup);
-#endif
MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen");
module_param(agp_try_unsupported, bool, 0);
{
int error;
- if (agp_off)
- return -ENODEV;
+ if (agp_off) {
+ error = -ENODEV;
+ goto err_put_bridge;
+ }
if (!bridge->dev) {
printk (KERN_DEBUG PFX "Erk, registering with no pci_dev!\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_put_bridge;
}
/* Grab reference on the chipset driver. */
if (!try_module_get(bridge->driver->owner)) {
dev_info(&bridge->dev->dev, "can't lock chipset driver\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_put_bridge;
}
error = agp_backend_initialize(bridge);
agp_backend_cleanup(bridge);
err_out:
module_put(bridge->driver->owner);
+err_put_bridge:
agp_put_bridge(bridge);
return error;
}
handle = obj;
do {
status = acpi_get_object_info(handle, &info);
- if (ACPI_SUCCESS(status)) {
+ if (ACPI_SUCCESS(status) && (info->valid & ACPI_VALID_HID)) {
/* TBD check _CID also */
- info->hardware_id.string[sizeof(info->hardware_id.length)-1] = '\0';
match = (strcmp(info->hardware_id.string, "HWP0001") == 0);
kfree(info);
if (match) {
handle = parent;
} while (ACPI_SUCCESS(status));
+ if (ACPI_FAILURE(status))
+ return AE_OK; /* found no enclosing IOC */
+
if (hp_zx1_setup(sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa))
return AE_OK;
&bridge->mode);
}
- if (bridge->driver->mask_memory == intel_i965_mask_memory)
+ if (bridge->driver->mask_memory == intel_i965_mask_memory) {
if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
dev_err(&intel_private.pcidev->dev,
"set gfx device dma mask 36bit failed!\n");
+ else
+ pci_set_consistent_dma_mask(intel_private.pcidev,
+ DMA_BIT_MASK(36));
+ }
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
goto out;
}
}
-out_unlock:
- mutex_unlock(&rng_mutex);
out:
return ret ? : err;
+out_unlock:
+ mutex_unlock(&rng_mutex);
+ goto out;
}
{ 0 },
};
-static struct virtio_driver virtio_rng = {
+static struct virtio_driver virtio_rng_driver = {
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
static int __init init(void)
{
- return register_virtio_driver(&virtio_rng);
+ return register_virtio_driver(&virtio_rng_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_rng);
+ unregister_virtio_driver(&virtio_rng_driver);
}
module_init(init);
module_exit(fini);
#ifdef CONFIG_ACPI
spmi_find_bmc();
#endif
-#ifdef CONFIG_PNP
+#ifdef CONFIG_ACPI
pnp_register_driver(&ipmi_pnp_driver);
#endif
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
-#ifdef CONFIG_PNP
+#ifdef CONFIG_ACPI
pnp_unregister_driver(&ipmi_pnp_driver);
#endif
dc->open_ttys--;
port->count--;
- tty_port_tty_set(port, NULL);
if (port->count == 0) {
DBG1("close: %d", nport->token_dl);
+ tty_port_tty_set(port, NULL);
spin_lock_irqsave(&dc->spin_mutex, flags);
dc->last_ier &= ~(nport->token_dl);
writew(dc->last_ier, dc->reg_ier);
#include <linux/err.h>
#include <linux/kfifo.h>
#include <linux/platform_device.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
static int sonypi_misc_open(struct inode *inode, struct file *file)
{
- lock_kernel();
mutex_lock(&sonypi_device.lock);
/* Flush input queue on first open */
if (!sonypi_device.open_count)
kfifo_reset(&sonypi_device.fifo);
sonypi_device.open_count++;
mutex_unlock(&sonypi_device.lock);
- unlock_kernel();
+
return 0;
}
return 0;
}
-static int sonypi_misc_ioctl(struct inode *ip, struct file *fp,
+static long sonypi_misc_ioctl(struct file *fp,
unsigned int cmd, unsigned long arg)
{
- int ret = 0;
+ long ret = 0;
void __user *argp = (void __user *)arg;
u8 val8;
u16 val16;
.open = sonypi_misc_open,
.release = sonypi_misc_release,
.fasync = sonypi_misc_fasync,
- .ioctl = sonypi_misc_ioctl,
+ .unlocked_ioctl = sonypi_misc_ioctl,
+ .llseek = no_llseek,
};
static struct miscdevice sonypi_misc_device = {
#include <linux/stat.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-
+#include <linux/smp_lock.h>
#include <linux/toshiba.h>
#define TOSH_MINOR_DEV 181
static int tosh_sci;
static int tosh_fan;
-static int tosh_ioctl(struct inode *, struct file *, unsigned int,
+static long tosh_ioctl(struct file *, unsigned int,
unsigned long);
static const struct file_operations tosh_fops = {
.owner = THIS_MODULE,
- .ioctl = tosh_ioctl,
+ .unlocked_ioctl = tosh_ioctl,
};
static struct miscdevice tosh_device = {
EXPORT_SYMBOL(tosh_smm);
-static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
- unsigned long arg)
+static long tosh_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
{
SMMRegisters regs;
SMMRegisters __user *argp = (SMMRegisters __user *)arg;
return -EINVAL;
/* do we need to emulate the fan ? */
+ lock_kernel();
if (tosh_fan==1) {
if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) {
err = tosh_emulate_fan(®s);
+ unlock_kernel();
break;
}
}
err = tosh_smm(®s);
+ unlock_kernel();
break;
default:
return -EINVAL;
pid = task_pid(current);
type = PIDTYPE_PID;
}
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
retval = __f_setown(filp, pid, type, 0);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
if (retval)
goto out;
} else {
#include <linux/hrtimer.h>
#include <linux/tick.h>
#include <linux/sched.h>
+#include <linux/math64.h>
#define BUCKETS 12
#define RESOLUTION 1024
static void menu_update(struct cpuidle_device *dev);
+/* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */
+static u64 div_round64(u64 dividend, u32 divisor)
+{
+ return div_u64(dividend + (divisor / 2), divisor);
+}
+
/**
* menu_select - selects the next idle state to enter
* @dev: the CPU
data->correction_factor[data->bucket] = RESOLUTION * DECAY;
/* Make sure to round up for half microseconds */
- data->predicted_us = DIV_ROUND_CLOSEST(
- data->expected_us * data->correction_factor[data->bucket],
- RESOLUTION * DECAY);
+ data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
+ RESOLUTION * DECAY);
/*
* We want to default to C1 (hlt), not to busy polling
dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
cookie, done ? *done : 0, used ? *used : 0);
- spin_lock_bh(atchan->lock);
+ spin_lock_bh(&atchan->lock);
last_complete = atchan->completed_cookie;
last_used = chan->cookie;
ret = dma_async_is_complete(cookie, last_complete, last_used);
}
- spin_unlock_bh(atchan->lock);
+ spin_unlock_bh(&atchan->lock);
if (done)
*done = last_complete;
dma_async_device_unregister(&base->dma_slave);
coh901318_pool_destroy(&base->pool);
free_irq(platform_get_irq(pdev, 0), base);
- kfree(base);
iounmap(base->virtbase);
+ kfree(base);
release_mem_region(pdev->resource->start,
resource_size(pdev->resource));
return 0;
goto err_kfree;
}
- memset(dw, 0, sizeof *dw);
-
dw->regs = ioremap(io->start, DW_REGLEN);
if (!dw->regs) {
err = -ENOMEM;
dma->dev = &pdev->dev;
if (!dma->chancnt) {
- dev_err(dev, "zero channels detected\n");
+ dev_err(dev, "channel enumeration error\n");
goto err_setup_interrupts;
}
* @dca: direct cache access context
* @intr_quirk: interrupt setup quirk (for ioat_v1 devices)
* @enumerate_channels: hw version specific channel enumeration
+ * @reset_hw: hw version specific channel (re)initialization
* @cleanup_tasklet: select between the v2 and v3 cleanup routines
* @timer_fn: select between the v2 and v3 timer watchdog routines
* @self_test: hardware version specific self test for each supported op type
struct dca_provider *dca;
void (*intr_quirk)(struct ioatdma_device *device);
int (*enumerate_channels)(struct ioatdma_device *device);
+ int (*reset_hw)(struct ioat_chan_common *chan);
void (*cleanup_tasklet)(unsigned long data);
void (*timer_fn)(unsigned long data);
int (*self_test)(struct ioatdma_device *device);
writeb(IOAT_CHANCMD_SUSPEND, chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
}
+static inline void ioat_reset(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+
+ writeb(IOAT_CHANCMD_RESET, chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
+}
+
+static inline bool ioat_reset_pending(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+ u8 cmd;
+
+ cmd = readb(chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
+ return (cmd & IOAT_CHANCMD_RESET) == IOAT_CHANCMD_RESET;
+}
+
static inline void ioat_set_chainaddr(struct ioat_dma_chan *ioat, u64 addr)
{
struct ioat_chan_common *chan = &ioat->base;
__ioat2_start_null_desc(ioat);
}
-static void ioat2_restart_channel(struct ioat2_dma_chan *ioat)
+int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo)
{
- struct ioat_chan_common *chan = &ioat->base;
- unsigned long phys_complete;
+ unsigned long end = jiffies + tmo;
+ int err = 0;
u32 status;
status = ioat_chansts(chan);
if (is_ioat_active(status) || is_ioat_idle(status))
ioat_suspend(chan);
while (is_ioat_active(status) || is_ioat_idle(status)) {
+ if (end && time_after(jiffies, end)) {
+ err = -ETIMEDOUT;
+ break;
+ }
status = ioat_chansts(chan);
cpu_relax();
}
+ return err;
+}
+
+int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo)
+{
+ unsigned long end = jiffies + tmo;
+ int err = 0;
+
+ ioat_reset(chan);
+ while (ioat_reset_pending(chan)) {
+ if (end && time_after(jiffies, end)) {
+ err = -ETIMEDOUT;
+ break;
+ }
+ cpu_relax();
+ }
+
+ return err;
+}
+
+static void ioat2_restart_channel(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ ioat2_quiesce(chan, 0);
if (ioat_cleanup_preamble(chan, &phys_complete))
__cleanup(ioat, phys_complete);
spin_unlock_bh(&chan->cleanup_lock);
}
+static int ioat2_reset_hw(struct ioat_chan_common *chan)
+{
+ /* throw away whatever the channel was doing and get it initialized */
+ u32 chanerr;
+
+ ioat2_quiesce(chan, msecs_to_jiffies(100));
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+
+ return ioat2_reset_sync(chan, msecs_to_jiffies(200));
+}
+
/**
* ioat2_enumerate_channels - find and initialize the device's channels
* @device: the device to be enumerated
(unsigned long) ioat);
ioat->xfercap_log = xfercap_log;
spin_lock_init(&ioat->ring_lock);
+ if (device->reset_hw(&ioat->base)) {
+ i = 0;
+ break;
+ }
}
dma->chancnt = i;
return i;
struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
struct ioat_chan_common *chan = &ioat->base;
struct ioat_ring_ent **ring;
- u32 chanerr;
int order;
/* have we already been set up? */
/* Setup register to interrupt and write completion status on error */
writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET);
- chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
- if (chanerr) {
- dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr);
- writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
- }
-
/* allocate a completion writeback area */
/* doing 2 32bit writes to mmio since 1 64b write doesn't work */
chan->completion = pci_pool_alloc(chan->device->completion_pool,
tasklet_disable(&chan->cleanup_task);
del_timer_sync(&chan->timer);
device->cleanup_tasklet((unsigned long) ioat);
-
- /* Delay 100ms after reset to allow internal DMA logic to quiesce
- * before removing DMA descriptor resources.
- */
- writeb(IOAT_CHANCMD_RESET,
- chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
- mdelay(100);
+ device->reset_hw(chan);
spin_lock_bh(&ioat->ring_lock);
descs = ioat2_ring_space(ioat);
int err;
device->enumerate_channels = ioat2_enumerate_channels;
+ device->reset_hw = ioat2_reset_hw;
device->cleanup_tasklet = ioat2_cleanup_tasklet;
device->timer_fn = ioat2_timer_event;
device->self_test = ioat_dma_self_test;
void __ioat2_issue_pending(struct ioat2_dma_chan *ioat);
void ioat2_cleanup_tasklet(unsigned long data);
void ioat2_timer_event(unsigned long data);
+int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo);
+int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo);
extern struct kobj_type ioat2_ktype;
extern struct kmem_cache *ioat2_cache;
#endif /* IOATDMA_V2_H */
num_descs = ioat2_xferlen_to_descs(ioat, len);
/* we need 2x the number of descriptors to cover greater than 3
- * sources
+ * sources (we need 1 extra source in the q-only continuation
+ * case and 3 extra sources in the p+q continuation case.
*/
- if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) {
+ if (src_cnt + dmaf_p_disabled_continue(flags) > 3 ||
+ (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) {
with_ext = 1;
num_descs *= 2;
} else
return 0;
}
+static int ioat3_reset_hw(struct ioat_chan_common *chan)
+{
+ /* throw away whatever the channel was doing and get it
+ * initialized, with ioat3 specific workarounds
+ */
+ struct ioatdma_device *device = chan->device;
+ struct pci_dev *pdev = device->pdev;
+ u32 chanerr;
+ u16 dev_id;
+ int err;
+
+ ioat2_quiesce(chan, msecs_to_jiffies(100));
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+
+ /* -= IOAT ver.3 workarounds =- */
+ /* Write CHANERRMSK_INT with 3E07h to mask out the errors
+ * that can cause stability issues for IOAT ver.3, and clear any
+ * pending errors
+ */
+ pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07);
+ err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr);
+ if (err) {
+ dev_err(&pdev->dev, "channel error register unreachable\n");
+ return err;
+ }
+ pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr);
+
+ /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
+ * (workaround for spurious config parity error after restart)
+ */
+ pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id);
+ if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0)
+ pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10);
+
+ return ioat2_reset_sync(chan, msecs_to_jiffies(200));
+}
+
int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
{
struct pci_dev *pdev = device->pdev;
struct ioat_chan_common *chan;
bool is_raid_device = false;
int err;
- u16 dev_id;
u32 cap;
device->enumerate_channels = ioat2_enumerate_channels;
+ device->reset_hw = ioat3_reset_hw;
device->self_test = ioat3_dma_self_test;
dma = &device->common;
dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock;
dma->device_prep_dma_xor_val = NULL;
#endif
- /* -= IOAT ver.3 workarounds =- */
- /* Write CHANERRMSK_INT with 3E07h to mask out the errors
- * that can cause stability issues for IOAT ver.3
- */
- pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07);
-
- /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
- * (workaround for spurious config parity error after restart)
- */
- pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id);
- if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0)
- pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10);
-
err = ioat_probe(device);
if (err)
return err;
#define IOAT_PCI_DEVICE_ID_OFFSET 0x02
#define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148
+#define IOAT_PCI_CHANERR_INT_OFFSET 0x180
#define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184
/* MMIO Device Registers */
#include <linux/dmaengine.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
#include <linux/platform_device.h>
#include <cpu/dma.h>
#include <asm/dma-sh.h>
#include "shdma.h"
/* DMA descriptor control */
-#define DESC_LAST (-1)
-#define DESC_COMP (1)
-#define DESC_NCOMP (0)
+enum sh_dmae_desc_status {
+ DESC_IDLE,
+ DESC_PREPARED,
+ DESC_SUBMITTED,
+ DESC_COMPLETED, /* completed, have to call callback */
+ DESC_WAITING, /* callback called, waiting for ack / re-submit */
+};
#define NR_DESCS_PER_CHANNEL 32
/*
*/
#define RS_DEFAULT (RS_DUAL)
+static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all);
+
#define SH_DMAC_CHAN_BASE(id) (dma_base_addr[id])
static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
{
return ts_shift[(chcr & CHCR_TS_MASK) >> CHCR_TS_SHIFT];
}
-static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs hw)
+static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw)
{
- sh_dmae_writel(sh_chan, hw.sar, SAR);
- sh_dmae_writel(sh_chan, hw.dar, DAR);
- sh_dmae_writel(sh_chan, hw.tcr >> calc_xmit_shift(sh_chan), TCR);
+ sh_dmae_writel(sh_chan, hw->sar, SAR);
+ sh_dmae_writel(sh_chan, hw->dar, DAR);
+ sh_dmae_writel(sh_chan, hw->tcr >> calc_xmit_shift(sh_chan), TCR);
}
static void dmae_start(struct sh_dmae_chan *sh_chan)
static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx)
{
- struct sh_desc *desc = tx_to_sh_desc(tx);
+ struct sh_desc *desc = tx_to_sh_desc(tx), *chunk, *last = desc, *c;
struct sh_dmae_chan *sh_chan = to_sh_chan(tx->chan);
+ dma_async_tx_callback callback = tx->callback;
dma_cookie_t cookie;
spin_lock_bh(&sh_chan->desc_lock);
if (cookie < 0)
cookie = 1;
- /* If desc only in the case of 1 */
- if (desc->async_tx.cookie != -EBUSY)
- desc->async_tx.cookie = cookie;
- sh_chan->common.cookie = desc->async_tx.cookie;
+ sh_chan->common.cookie = cookie;
+ tx->cookie = cookie;
+
+ /* Mark all chunks of this descriptor as submitted, move to the queue */
+ list_for_each_entry_safe(chunk, c, desc->node.prev, node) {
+ /*
+ * All chunks are on the global ld_free, so, we have to find
+ * the end of the chain ourselves
+ */
+ if (chunk != desc && (chunk->mark == DESC_IDLE ||
+ chunk->async_tx.cookie > 0 ||
+ chunk->async_tx.cookie == -EBUSY ||
+ &chunk->node == &sh_chan->ld_free))
+ break;
+ chunk->mark = DESC_SUBMITTED;
+ /* Callback goes to the last chunk */
+ chunk->async_tx.callback = NULL;
+ chunk->cookie = cookie;
+ list_move_tail(&chunk->node, &sh_chan->ld_queue);
+ last = chunk;
+ }
+
+ last->async_tx.callback = callback;
+ last->async_tx.callback_param = tx->callback_param;
- list_splice_init(&desc->tx_list, sh_chan->ld_queue.prev);
+ dev_dbg(sh_chan->dev, "submit #%d@%p on %d: %x[%d] -> %x\n",
+ tx->cookie, &last->async_tx, sh_chan->id,
+ desc->hw.sar, desc->hw.tcr, desc->hw.dar);
spin_unlock_bh(&sh_chan->desc_lock);
return cookie;
}
+/* Called with desc_lock held */
static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan)
{
- struct sh_desc *desc, *_desc, *ret = NULL;
+ struct sh_desc *desc;
- spin_lock_bh(&sh_chan->desc_lock);
- list_for_each_entry_safe(desc, _desc, &sh_chan->ld_free, node) {
- if (async_tx_test_ack(&desc->async_tx)) {
+ list_for_each_entry(desc, &sh_chan->ld_free, node)
+ if (desc->mark != DESC_PREPARED) {
+ BUG_ON(desc->mark != DESC_IDLE);
list_del(&desc->node);
- ret = desc;
- break;
+ return desc;
}
- }
- spin_unlock_bh(&sh_chan->desc_lock);
-
- return ret;
-}
-
-static void sh_dmae_put_desc(struct sh_dmae_chan *sh_chan, struct sh_desc *desc)
-{
- if (desc) {
- spin_lock_bh(&sh_chan->desc_lock);
-
- list_splice_init(&desc->tx_list, &sh_chan->ld_free);
- list_add(&desc->node, &sh_chan->ld_free);
- spin_unlock_bh(&sh_chan->desc_lock);
- }
+ return NULL;
}
static int sh_dmae_alloc_chan_resources(struct dma_chan *chan)
dma_async_tx_descriptor_init(&desc->async_tx,
&sh_chan->common);
desc->async_tx.tx_submit = sh_dmae_tx_submit;
- desc->async_tx.flags = DMA_CTRL_ACK;
- INIT_LIST_HEAD(&desc->tx_list);
- sh_dmae_put_desc(sh_chan, desc);
+ desc->mark = DESC_IDLE;
spin_lock_bh(&sh_chan->desc_lock);
+ list_add(&desc->node, &sh_chan->ld_free);
sh_chan->descs_allocated++;
}
spin_unlock_bh(&sh_chan->desc_lock);
struct sh_desc *desc, *_desc;
LIST_HEAD(list);
- BUG_ON(!list_empty(&sh_chan->ld_queue));
+ /* Prepared and not submitted descriptors can still be on the queue */
+ if (!list_empty(&sh_chan->ld_queue))
+ sh_dmae_chan_ld_cleanup(sh_chan, true);
+
spin_lock_bh(&sh_chan->desc_lock);
list_splice_init(&sh_chan->ld_free, &list);
struct sh_dmae_chan *sh_chan;
struct sh_desc *first = NULL, *prev = NULL, *new;
size_t copy_size;
+ LIST_HEAD(tx_list);
+ int chunks = (len + SH_DMA_TCR_MAX) / (SH_DMA_TCR_MAX + 1);
if (!chan)
return NULL;
sh_chan = to_sh_chan(chan);
+ /* Have to lock the whole loop to protect against concurrent release */
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ /*
+ * Chaining:
+ * first descriptor is what user is dealing with in all API calls, its
+ * cookie is at first set to -EBUSY, at tx-submit to a positive
+ * number
+ * if more than one chunk is needed further chunks have cookie = -EINVAL
+ * the last chunk, if not equal to the first, has cookie = -ENOSPC
+ * all chunks are linked onto the tx_list head with their .node heads
+ * only during this function, then they are immediately spliced
+ * back onto the free list in form of a chain
+ */
do {
- /* Allocate the link descriptor from DMA pool */
+ /* Allocate the link descriptor from the free list */
new = sh_dmae_get_desc(sh_chan);
if (!new) {
dev_err(sh_chan->dev,
"No free memory for link descriptor\n");
- goto err_get_desc;
+ list_for_each_entry(new, &tx_list, node)
+ new->mark = DESC_IDLE;
+ list_splice(&tx_list, &sh_chan->ld_free);
+ spin_unlock_bh(&sh_chan->desc_lock);
+ return NULL;
}
- copy_size = min(len, (size_t)SH_DMA_TCR_MAX);
+ copy_size = min(len, (size_t)SH_DMA_TCR_MAX + 1);
new->hw.sar = dma_src;
new->hw.dar = dma_dest;
new->hw.tcr = copy_size;
- if (!first)
+ if (!first) {
+ /* First desc */
+ new->async_tx.cookie = -EBUSY;
first = new;
+ } else {
+ /* Other desc - invisible to the user */
+ new->async_tx.cookie = -EINVAL;
+ }
- new->mark = DESC_NCOMP;
- async_tx_ack(&new->async_tx);
+ dev_dbg(sh_chan->dev,
+ "chaining %u of %u with %p, dst %x, cookie %d\n",
+ copy_size, len, &new->async_tx, dma_dest,
+ new->async_tx.cookie);
+
+ new->mark = DESC_PREPARED;
+ new->async_tx.flags = flags;
+ new->chunks = chunks--;
prev = new;
len -= copy_size;
dma_src += copy_size;
dma_dest += copy_size;
/* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &first->tx_list);
+ list_add_tail(&new->node, &tx_list);
} while (len);
- new->async_tx.flags = flags; /* client is in control of this ack */
- new->async_tx.cookie = -EBUSY; /* Last desc */
+ if (new != first)
+ new->async_tx.cookie = -ENOSPC;
- return &first->async_tx;
+ /* Put them back on the free list, so, they don't get lost */
+ list_splice_tail(&tx_list, &sh_chan->ld_free);
-err_get_desc:
- sh_dmae_put_desc(sh_chan, first);
- return NULL;
+ spin_unlock_bh(&sh_chan->desc_lock);
+ return &first->async_tx;
}
-/*
- * sh_chan_ld_cleanup - Clean up link descriptors
- *
- * This function clean up the ld_queue of DMA channel.
- */
-static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan)
+static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all)
{
struct sh_desc *desc, *_desc;
+ /* Is the "exposed" head of a chain acked? */
+ bool head_acked = false;
+ dma_cookie_t cookie = 0;
+ dma_async_tx_callback callback = NULL;
+ void *param = NULL;
spin_lock_bh(&sh_chan->desc_lock);
list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) {
- dma_async_tx_callback callback;
- void *callback_param;
-
- /* non send data */
- if (desc->mark == DESC_NCOMP)
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+
+ BUG_ON(tx->cookie > 0 && tx->cookie != desc->cookie);
+ BUG_ON(desc->mark != DESC_SUBMITTED &&
+ desc->mark != DESC_COMPLETED &&
+ desc->mark != DESC_WAITING);
+
+ /*
+ * queue is ordered, and we use this loop to (1) clean up all
+ * completed descriptors, and to (2) update descriptor flags of
+ * any chunks in a (partially) completed chain
+ */
+ if (!all && desc->mark == DESC_SUBMITTED &&
+ desc->cookie != cookie)
break;
- /* send data sesc */
- callback = desc->async_tx.callback;
- callback_param = desc->async_tx.callback_param;
+ if (tx->cookie > 0)
+ cookie = tx->cookie;
- /* Remove from ld_queue list */
- list_splice_init(&desc->tx_list, &sh_chan->ld_free);
+ if (desc->mark == DESC_COMPLETED && desc->chunks == 1) {
+ BUG_ON(sh_chan->completed_cookie != desc->cookie - 1);
+ sh_chan->completed_cookie = desc->cookie;
+ }
- dev_dbg(sh_chan->dev, "link descriptor %p will be recycle.\n",
- desc);
+ /* Call callback on the last chunk */
+ if (desc->mark == DESC_COMPLETED && tx->callback) {
+ desc->mark = DESC_WAITING;
+ callback = tx->callback;
+ param = tx->callback_param;
+ dev_dbg(sh_chan->dev, "descriptor #%d@%p on %d callback\n",
+ tx->cookie, tx, sh_chan->id);
+ BUG_ON(desc->chunks != 1);
+ break;
+ }
- list_move(&desc->node, &sh_chan->ld_free);
- /* Run the link descriptor callback function */
- if (callback) {
- spin_unlock_bh(&sh_chan->desc_lock);
- dev_dbg(sh_chan->dev, "link descriptor %p callback\n",
- desc);
- callback(callback_param);
- spin_lock_bh(&sh_chan->desc_lock);
+ if (tx->cookie > 0 || tx->cookie == -EBUSY) {
+ if (desc->mark == DESC_COMPLETED) {
+ BUG_ON(tx->cookie < 0);
+ desc->mark = DESC_WAITING;
+ }
+ head_acked = async_tx_test_ack(tx);
+ } else {
+ switch (desc->mark) {
+ case DESC_COMPLETED:
+ desc->mark = DESC_WAITING;
+ /* Fall through */
+ case DESC_WAITING:
+ if (head_acked)
+ async_tx_ack(&desc->async_tx);
+ }
+ }
+
+ dev_dbg(sh_chan->dev, "descriptor %p #%d completed.\n",
+ tx, tx->cookie);
+
+ if (((desc->mark == DESC_COMPLETED ||
+ desc->mark == DESC_WAITING) &&
+ async_tx_test_ack(&desc->async_tx)) || all) {
+ /* Remove from ld_queue list */
+ desc->mark = DESC_IDLE;
+ list_move(&desc->node, &sh_chan->ld_free);
}
}
spin_unlock_bh(&sh_chan->desc_lock);
+
+ if (callback)
+ callback(param);
+
+ return callback;
+}
+
+/*
+ * sh_chan_ld_cleanup - Clean up link descriptors
+ *
+ * This function cleans up the ld_queue of DMA channel.
+ */
+static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all)
+{
+ while (__ld_cleanup(sh_chan, all))
+ ;
}
static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
{
- struct list_head *ld_node;
- struct sh_dmae_regs hw;
+ struct sh_desc *sd;
+ spin_lock_bh(&sh_chan->desc_lock);
/* DMA work check */
- if (dmae_is_busy(sh_chan))
+ if (dmae_is_busy(sh_chan)) {
+ spin_unlock_bh(&sh_chan->desc_lock);
return;
+ }
/* Find the first un-transfer desciptor */
- for (ld_node = sh_chan->ld_queue.next;
- (ld_node != &sh_chan->ld_queue)
- && (to_sh_desc(ld_node)->mark == DESC_COMP);
- ld_node = ld_node->next)
- cpu_relax();
-
- if (ld_node != &sh_chan->ld_queue) {
- /* Get the ld start address from ld_queue */
- hw = to_sh_desc(ld_node)->hw;
- dmae_set_reg(sh_chan, hw);
- dmae_start(sh_chan);
- }
+ list_for_each_entry(sd, &sh_chan->ld_queue, node)
+ if (sd->mark == DESC_SUBMITTED) {
+ /* Get the ld start address from ld_queue */
+ dmae_set_reg(sh_chan, &sd->hw);
+ dmae_start(sh_chan);
+ break;
+ }
+
+ spin_unlock_bh(&sh_chan->desc_lock);
}
static void sh_dmae_memcpy_issue_pending(struct dma_chan *chan)
dma_cookie_t last_used;
dma_cookie_t last_complete;
- sh_dmae_chan_ld_cleanup(sh_chan);
+ sh_dmae_chan_ld_cleanup(sh_chan, false);
last_used = chan->cookie;
last_complete = sh_chan->completed_cookie;
- if (last_complete == -EBUSY)
- last_complete = last_used;
+ BUG_ON(last_complete < 0);
if (done)
*done = last_complete;
err = sh_dmae_rst(0);
if (err)
return err;
+#ifdef SH_DMAC_BASE1
if (shdev->pdata.mode & SHDMA_DMAOR1) {
err = sh_dmae_rst(1);
if (err)
return err;
}
+#endif
disable_irq(irq);
return IRQ_HANDLED;
}
static void dmae_do_tasklet(unsigned long data)
{
struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
- struct sh_desc *desc, *_desc, *cur_desc = NULL;
+ struct sh_desc *desc;
u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
- list_for_each_entry_safe(desc, _desc,
- &sh_chan->ld_queue, node) {
- if ((desc->hw.sar + desc->hw.tcr) == sar_buf) {
- cur_desc = desc;
+ spin_lock(&sh_chan->desc_lock);
+ list_for_each_entry(desc, &sh_chan->ld_queue, node) {
+ if ((desc->hw.sar + desc->hw.tcr) == sar_buf &&
+ desc->mark == DESC_SUBMITTED) {
+ dev_dbg(sh_chan->dev, "done #%d@%p dst %u\n",
+ desc->async_tx.cookie, &desc->async_tx,
+ desc->hw.dar);
+ desc->mark = DESC_COMPLETED;
break;
}
}
+ spin_unlock(&sh_chan->desc_lock);
- if (cur_desc) {
- switch (cur_desc->async_tx.cookie) {
- case 0: /* other desc data */
- break;
- case -EBUSY: /* last desc */
- sh_chan->completed_cookie =
- cur_desc->async_tx.cookie;
- break;
- default: /* first desc ( 0 < )*/
- sh_chan->completed_cookie =
- cur_desc->async_tx.cookie - 1;
- break;
- }
- cur_desc->mark = DESC_COMP;
- }
/* Next desc */
sh_chan_xfer_ld_queue(sh_chan);
- sh_dmae_chan_ld_cleanup(sh_chan);
+ sh_dmae_chan_ld_cleanup(sh_chan, false);
}
static unsigned int get_dmae_irq(unsigned int id)
#ifndef __DMA_SHDMA_H
#define __DMA_SHDMA_H
-#include <linux/device.h>
-#include <linux/dmapool.h>
#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
#define SH_DMA_TCR_MAX 0x00FFFFFF /* 16MB */
};
struct sh_desc {
- struct list_head tx_list;
struct sh_dmae_regs hw;
struct list_head node;
struct dma_async_tx_descriptor async_tx;
+ dma_cookie_t cookie;
+ int chunks;
int mark;
};
+struct device;
+
struct sh_dmae_chan {
dma_cookie_t completed_cookie; /* The maximum cookie completed */
spinlock_t desc_lock; /* Descriptor operation lock */
edac_printk(KERN_DEBUG, EDAC_MC,
"pci-read, sdram scrub control value: %d \n", scrubval);
- for (i = 0; ARRAY_SIZE(scrubrates); i++) {
+ for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
if (scrubrates[i].scrubval == scrubval) {
*bw = scrubrates[i].bandwidth;
status = 0;
debugf0("\tUncorrected bits= 0x%x\n", ue_errors);
branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
- channel = branch;
+
+ /*
+ * According with i5000 datasheet, bit 28 has no significance
+ * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD
+ */
+ channel = branch & 2;
+
bank = NREC_BANK(info->nrecmema);
rank = NREC_RANK(info->nrecmema);
rdwr = NREC_RDWR(info->nrecmema);
+menu "IEEE 1394 (FireWire) support"
+ depends on PCI || BROKEN
+ # firewire-core does not depend on PCI but is
+ # not useful without PCI controller driver
+
comment "You can enable one or both FireWire driver stacks."
-comment "See the help texts for more information."
+comment "The newer stack is recommended."
config FIREWIRE
tristate "FireWire driver stack"
To compile this driver as a module, say M here: the module will be
called firewire-core.
- This module functionally replaces ieee1394, raw1394, and video1394.
- To access it from application programs, you generally need at least
- libraw1394 v2. IIDC/DCAM applications need libdc1394 v2.
- No libraries are required to access storage devices through the
- firewire-sbp2 driver.
-
- NOTE:
- FireWire audio devices currently require the old drivers (ieee1394,
- ohci1394, raw1394).
-
config FIREWIRE_OHCI
tristate "OHCI-1394 controllers"
depends on PCI && FIREWIRE
is the only chipset in use, so say Y here.
To compile this driver as a module, say M here: The module will be
- called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394
- stack.
-
- NOTE:
- If you want to install firewire-ohci and ohci1394 together, you
- should configure them only as modules and blacklist the driver(s)
- which you don't want to have auto-loaded. Add either
-
- blacklist firewire-ohci
- or
- blacklist ohci1394
- blacklist video1394
- blacklist dv1394
-
- to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
- depending on your distribution.
+ called firewire-ohci.
config FIREWIRE_OHCI_DEBUG
bool
like scanners.
To compile this driver as a module, say M here: The module will be
- called firewire-sbp2. It replaces sbp2 of the classic IEEE 1394
- stack.
+ called firewire-sbp2.
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
NOTE, this driver is not stable yet!
To compile this driver as a module, say M here: The module will be
- called firewire-net. It replaces eth1394 of the classic IEEE 1394
- stack.
+ called firewire-net.
+
+source "drivers/ieee1394/Kconfig"
+
+endmenu
static int descriptor_count;
static __be32 tmp_config_rom[256];
+/* ROM header, bus info block, root dir header, capabilities = 7 quadlets */
+static size_t config_rom_length = 1 + 4 + 1 + 1;
#define BIB_CRC(v) ((v) << 0)
#define BIB_CRC_LENGTH(v) ((v) << 16)
#define BIB_CMC ((1) << 30)
#define BIB_IMC ((1) << 31)
-static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom)
+static void generate_config_rom(struct fw_card *card, __be32 *config_rom)
{
struct fw_descriptor *desc;
int i, j, k, length;
for (i = 0; i < j; i += length + 1)
length = fw_compute_block_crc(config_rom + i);
- return j;
+ WARN_ON(j != config_rom_length);
}
static void update_config_roms(void)
{
struct fw_card *card;
- size_t length;
list_for_each_entry (card, &card_list, link) {
- length = generate_config_rom(card, tmp_config_rom);
- card->driver->set_config_rom(card, tmp_config_rom, length);
+ generate_config_rom(card, tmp_config_rom);
+ card->driver->set_config_rom(card, tmp_config_rom,
+ config_rom_length);
}
}
+static size_t required_space(struct fw_descriptor *desc)
+{
+ /* descriptor + entry into root dir + optional immediate entry */
+ return desc->length + 1 + (desc->immediate > 0 ? 1 : 0);
+}
+
int fw_core_add_descriptor(struct fw_descriptor *desc)
{
size_t i;
+ int ret;
/*
* Check descriptor is valid; the length of all blocks in the
mutex_lock(&card_mutex);
- list_add_tail(&desc->link, &descriptor_list);
- descriptor_count++;
- if (desc->immediate > 0)
+ if (config_rom_length + required_space(desc) > 256) {
+ ret = -EBUSY;
+ } else {
+ list_add_tail(&desc->link, &descriptor_list);
+ config_rom_length += required_space(desc);
descriptor_count++;
- update_config_roms();
+ if (desc->immediate > 0)
+ descriptor_count++;
+ update_config_roms();
+ ret = 0;
+ }
mutex_unlock(&card_mutex);
- return 0;
+ return ret;
}
EXPORT_SYMBOL(fw_core_add_descriptor);
mutex_lock(&card_mutex);
list_del(&desc->link);
+ config_rom_length -= required_space(desc);
descriptor_count--;
if (desc->immediate > 0)
descriptor_count--;
int fw_card_add(struct fw_card *card,
u32 max_receive, u32 link_speed, u64 guid)
{
- size_t length;
int ret;
card->max_receive = max_receive;
mutex_lock(&card_mutex);
- length = generate_config_rom(card, tmp_config_rom);
- ret = card->driver->enable(card, tmp_config_rom, length);
+ generate_config_rom(card, tmp_config_rom);
+ ret = card->driver->enable(card, tmp_config_rom, config_rom_length);
if (ret == 0)
list_add_tail(&card->link, &card_list);
#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
#include <linux/time.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
client->device->max_speed);
}
+static inline bool is_fcp_request(struct fw_request *request)
+{
+ return request == NULL;
+}
+
static void release_request(struct client *client,
struct client_resource *resource)
{
struct inbound_transaction_resource *r = container_of(resource,
struct inbound_transaction_resource, resource);
- fw_send_response(client->device->card, r->request,
- RCODE_CONFLICT_ERROR);
+ if (is_fcp_request(r->request))
+ kfree(r->data);
+ else
+ fw_send_response(client->device->card, r->request,
+ RCODE_CONFLICT_ERROR);
kfree(r);
}
struct address_handler_resource *handler = callback_data;
struct inbound_transaction_resource *r;
struct inbound_transaction_event *e;
+ void *fcp_frame = NULL;
int ret;
r = kmalloc(sizeof(*r), GFP_ATOMIC);
r->data = payload;
r->length = length;
+ if (is_fcp_request(request)) {
+ /*
+ * FIXME: Let core-transaction.c manage a
+ * single reference-counted copy?
+ */
+ fcp_frame = kmemdup(payload, length, GFP_ATOMIC);
+ if (fcp_frame == NULL)
+ goto failed;
+
+ r->data = fcp_frame;
+ }
+
r->resource.release = release_request;
ret = add_client_resource(handler->client, &r->resource, GFP_ATOMIC);
if (ret < 0)
e->request.closure = handler->closure;
queue_event(handler->client, &e->event,
- &e->request, sizeof(e->request), payload, length);
+ &e->request, sizeof(e->request), r->data, length);
return;
failed:
kfree(r);
kfree(e);
- fw_send_response(card, request, RCODE_CONFLICT_ERROR);
+ kfree(fcp_frame);
+
+ if (!is_fcp_request(request))
+ fw_send_response(card, request, RCODE_CONFLICT_ERROR);
}
static void release_address_handler(struct client *client,
r = container_of(resource, struct inbound_transaction_resource,
resource);
+ if (is_fcp_request(r->request))
+ goto out;
+
if (request->length < r->length)
r->length = request->length;
-
if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) {
ret = -EFAULT;
+ kfree(r->request);
goto out;
}
-
fw_send_response(client->device->card, r->request, request->rcode);
out:
kfree(r);
return NULL;
}
+static bool is_enclosing_handler(struct fw_address_handler *handler,
+ unsigned long long offset, size_t length)
+{
+ return handler->offset <= offset &&
+ offset + length <= handler->offset + handler->length;
+}
+
static struct fw_address_handler *lookup_enclosing_address_handler(
struct list_head *list, unsigned long long offset, size_t length)
{
struct fw_address_handler *handler;
list_for_each_entry(handler, list, link) {
- if (handler->offset <= offset &&
- offset + length <= handler->offset + handler->length)
+ if (is_enclosing_handler(handler, offset, length))
return handler;
}
{ .start = 0xfffff0000900ULL, .end = 0x1000000000000ULL, };
#endif /* 0 */
+static bool is_in_fcp_region(u64 offset, size_t length)
+{
+ return offset >= (CSR_REGISTER_BASE | CSR_FCP_COMMAND) &&
+ offset + length <= (CSR_REGISTER_BASE | CSR_FCP_END);
+}
+
/**
* fw_core_add_address_handler - register for incoming requests
* @handler: callback
* give the details of the particular request.
*
* Return value: 0 on success, non-zero otherwise.
+ *
* The start offset of the handler's address region is determined by
* fw_core_add_address_handler() and is returned in handler->offset.
+ *
+ * Address allocations are exclusive, except for the FCP registers.
*/
int fw_core_add_address_handler(struct fw_address_handler *handler,
const struct fw_address_region *region)
handler->offset = region->start;
while (handler->offset + handler->length <= region->end) {
- other =
- lookup_overlapping_address_handler(&address_handler_list,
- handler->offset,
- handler->length);
+ if (is_in_fcp_region(handler->offset, handler->length))
+ other = NULL;
+ else
+ other = lookup_overlapping_address_handler
+ (&address_handler_list,
+ handler->offset, handler->length);
if (other != NULL) {
handler->offset += other->length;
} else {
void fw_send_response(struct fw_card *card,
struct fw_request *request, int rcode)
{
+ if (WARN_ONCE(!request, "invalid for FCP address handlers"))
+ return;
+
/* unified transaction or broadcast transaction: don't respond */
if (request->ack != ACK_PENDING ||
HEADER_DESTINATION_IS_BROADCAST(request->request_header[0])) {
}
EXPORT_SYMBOL(fw_send_response);
-void fw_core_handle_request(struct fw_card *card, struct fw_packet *p)
+static void handle_exclusive_region_request(struct fw_card *card,
+ struct fw_packet *p,
+ struct fw_request *request,
+ unsigned long long offset)
{
struct fw_address_handler *handler;
- struct fw_request *request;
- unsigned long long offset;
unsigned long flags;
int tcode, destination, source;
- if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE)
- return;
-
- request = allocate_request(p);
- if (request == NULL) {
- /* FIXME: send statically allocated busy packet. */
- return;
- }
-
- offset =
- ((unsigned long long)
- HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) | p->header[2];
tcode = HEADER_GET_TCODE(p->header[0]);
destination = HEADER_GET_DESTINATION(p->header[0]);
source = HEADER_GET_SOURCE(p->header[1]);
request->data, request->length,
handler->callback_data);
}
+
+static void handle_fcp_region_request(struct fw_card *card,
+ struct fw_packet *p,
+ struct fw_request *request,
+ unsigned long long offset)
+{
+ struct fw_address_handler *handler;
+ unsigned long flags;
+ int tcode, destination, source;
+
+ if ((offset != (CSR_REGISTER_BASE | CSR_FCP_COMMAND) &&
+ offset != (CSR_REGISTER_BASE | CSR_FCP_RESPONSE)) ||
+ request->length > 0x200) {
+ fw_send_response(card, request, RCODE_ADDRESS_ERROR);
+
+ return;
+ }
+
+ tcode = HEADER_GET_TCODE(p->header[0]);
+ destination = HEADER_GET_DESTINATION(p->header[0]);
+ source = HEADER_GET_SOURCE(p->header[1]);
+
+ if (tcode != TCODE_WRITE_QUADLET_REQUEST &&
+ tcode != TCODE_WRITE_BLOCK_REQUEST) {
+ fw_send_response(card, request, RCODE_TYPE_ERROR);
+
+ return;
+ }
+
+ spin_lock_irqsave(&address_handler_lock, flags);
+ list_for_each_entry(handler, &address_handler_list, link) {
+ if (is_enclosing_handler(handler, offset, request->length))
+ handler->address_callback(card, NULL, tcode,
+ destination, source,
+ p->generation, p->speed,
+ offset, request->data,
+ request->length,
+ handler->callback_data);
+ }
+ spin_unlock_irqrestore(&address_handler_lock, flags);
+
+ fw_send_response(card, request, RCODE_COMPLETE);
+}
+
+void fw_core_handle_request(struct fw_card *card, struct fw_packet *p)
+{
+ struct fw_request *request;
+ unsigned long long offset;
+
+ if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE)
+ return;
+
+ request = allocate_request(p);
+ if (request == NULL) {
+ /* FIXME: send statically allocated busy packet. */
+ return;
+ }
+
+ offset = ((u64)HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) |
+ p->header[2];
+
+ if (!is_in_fcp_region(offset, request->length))
+ handle_exclusive_region_request(card, p, request, offset);
+ else
+ handle_fcp_region_request(card, p, request, offset);
+
+}
EXPORT_SYMBOL(fw_core_handle_request);
void fw_core_handle_response(struct fw_card *card, struct fw_packet *p)
if (rest == 0)
return -EINVAL;
- /* FIXME: make packet-per-buffer/dual-buffer a context option */
while (rest > 0) {
d = context_get_descriptors(&ctx->context,
z + header_z, &d_bus);
#define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
+#define PCI_DEVICE_ID_TI_TSB43AB23 0x8024
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
}
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
+#if 0
+ /* FIXME: make it a context option or remove dual-buffer mode */
ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
+#endif
/* dual-buffer mode is broken if more than one IR context is active */
if (dev->vendor == PCI_VENDOR_ID_AGERE &&
#if !defined(CONFIG_X86_32)
/* dual-buffer mode is broken with descriptor addresses above 2G */
if (dev->vendor == PCI_VENDOR_ID_TI &&
- dev->device == PCI_DEVICE_ID_TI_TSB43AB22)
+ (dev->device == PCI_DEVICE_ID_TI_TSB43AB22 ||
+ dev->device == PCI_DEVICE_ID_TI_TSB43AB23))
ohci->use_dualbuffer = false;
#endif
To compile this driver as a module, choose M here: the module will
be called adp5520-gpio.
+config GPIO_ADP5588
+ tristate "ADP5588 I2C GPIO expander"
+ depends on I2C
+ help
+ This option enables support for 18 GPIOs found
+ on Analog Devices ADP5588 GPIO Expanders.
+ To compile this driver as a module, choose M here: the module will be
+ called adp5588-gpio.
+
comment "PCI GPIO expanders:"
config GPIO_CS5535
obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
+obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o
obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX7301) += max7301.o
obj-$(CONFIG_GPIO_MAX732X) += max732x.o
--- /dev/null
+/*
+ * GPIO Chip driver for Analog Devices
+ * ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/adp5588.h>
+
+#define DRV_NAME "adp5588-gpio"
+#define MAXGPIO 18
+#define ADP_BANK(offs) ((offs) >> 3)
+#define ADP_BIT(offs) (1u << ((offs) & 0x7))
+
+struct adp5588_gpio {
+ struct i2c_client *client;
+ struct gpio_chip gpio_chip;
+ struct mutex lock; /* protect cached dir, dat_out */
+ unsigned gpio_start;
+ uint8_t dat_out[3];
+ uint8_t dir[3];
+};
+
+static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Read Error\n");
+
+ return ret;
+}
+
+static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Write Error\n");
+
+ return ret;
+}
+
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off))
+ & ADP_BIT(off));
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ unsigned bank, bit;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+ bit = ADP_BIT(off);
+
+ mutex_lock(&dev->lock);
+ if (val)
+ dev->dat_out[bank] |= bit;
+ else
+ dev->dat_out[bank] &= ~bit;
+
+ adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+ dev->dat_out[bank]);
+ mutex_unlock(&dev->lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+ int ret;
+ unsigned bank;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+
+ mutex_lock(&dev->lock);
+ dev->dir[bank] &= ~ADP_BIT(off);
+ ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ int ret;
+ unsigned bank, bit;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+ bit = ADP_BIT(off);
+
+ mutex_lock(&dev->lock);
+ dev->dir[bank] |= bit;
+
+ if (val)
+ dev->dat_out[bank] |= bit;
+ else
+ dev->dat_out[bank] &= ~bit;
+
+ ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+ dev->dat_out[bank]);
+ ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank,
+ dev->dir[bank]);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static int __devinit adp5588_gpio_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ struct adp5588_gpio *dev;
+ struct gpio_chip *gc;
+ int ret, i, revid;
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ dev->client = client;
+
+ gc = &dev->gpio_chip;
+ gc->direction_input = adp5588_gpio_direction_input;
+ gc->direction_output = adp5588_gpio_direction_output;
+ gc->get = adp5588_gpio_get_value;
+ gc->set = adp5588_gpio_set_value;
+ gc->can_sleep = 1;
+
+ gc->base = pdata->gpio_start;
+ gc->ngpio = MAXGPIO;
+ gc->label = client->name;
+ gc->owner = THIS_MODULE;
+
+ mutex_init(&dev->lock);
+
+
+ ret = adp5588_gpio_read(dev->client, DEV_ID);
+ if (ret < 0)
+ goto err;
+
+ revid = ret & ADP5588_DEVICE_ID_MASK;
+
+ for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
+ dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
+ ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
+ ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
+ (pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
+
+ if (ret)
+ goto err;
+ }
+
+ ret = gpiochip_add(&dev->gpio_chip);
+ if (ret)
+ goto err;
+
+ dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n",
+ gc->base, gc->base + gc->ngpio - 1,
+ client->name, revid);
+
+ if (pdata->setup) {
+ ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
+ if (ret < 0)
+ dev_warn(&client->dev, "setup failed, %d\n", ret);
+ }
+
+ i2c_set_clientdata(client, dev);
+ return 0;
+
+err:
+ kfree(dev);
+ return ret;
+}
+
+static int __devexit adp5588_gpio_remove(struct i2c_client *client)
+{
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ struct adp5588_gpio *dev = i2c_get_clientdata(client);
+ int ret;
+
+ if (pdata->teardown) {
+ ret = pdata->teardown(client,
+ dev->gpio_chip.base, dev->gpio_chip.ngpio,
+ pdata->context);
+ if (ret < 0) {
+ dev_err(&client->dev, "teardown failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = gpiochip_remove(&dev->gpio_chip);
+ if (ret) {
+ dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
+ return ret;
+ }
+
+ kfree(dev);
+ return 0;
+}
+
+static const struct i2c_device_id adp5588_gpio_id[] = {
+ {DRV_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id);
+
+static struct i2c_driver adp5588_gpio_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = adp5588_gpio_probe,
+ .remove = __devexit_p(adp5588_gpio_remove),
+ .id_table = adp5588_gpio_id,
+};
+
+static int __init adp5588_gpio_init(void)
+{
+ return i2c_add_driver(&adp5588_gpio_driver);
+}
+
+module_init(adp5588_gpio_init);
+
+static void __exit adp5588_gpio_exit(void)
+{
+ i2c_del_driver(&adp5588_gpio_driver);
+}
+
+module_exit(adp5588_gpio_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("GPIO ADP5588 Driver");
+MODULE_LICENSE("GPL");
desc = &gpio_desc[gpio];
if (test_bit(FLAG_EXPORT, &desc->flags)) {
- struct device *dev;
-
dev = class_find_device(&gpio_class, NULL, desc, match_export);
if (dev == NULL) {
status = -ENODEV;
struct drm_ati_pcigart_info *gart_info)
{
gart_info->table_handle = drm_pci_alloc(dev, gart_info->table_size,
- PAGE_SIZE,
- gart_info->table_mask);
+ PAGE_SIZE);
if (gart_info->table_handle == NULL)
return -ENOMEM;
if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) {
DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n");
+ if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) {
+ DRM_ERROR("fail to set dma mask to 0x%Lx\n",
+ gart_info->table_mask);
+ ret = 1;
+ goto done;
+ }
+
ret = drm_ati_alloc_pcigart_table(dev, gart_info);
if (ret) {
DRM_ERROR("cannot allocate PCI GART page!\n");
* As we're limiting the address to 2^32-1 (or less),
* casting it down to 32 bits is no problem, but we
* need to point to a 64bit variable first. */
- dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL);
+ dmah = drm_pci_alloc(dev, map->size, map->size);
if (!dmah) {
kfree(map);
return -ENOMEM;
while (entry->buf_count < count) {
- dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000, 0xfffffffful);
+ dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000);
if (!dmah) {
/* Set count correctly so we free the proper amount. */
{ DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
{ DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
+ { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 },
};
static struct drm_prop_enum_list drm_encoder_enum_list[] =
EXPORT_SYMBOL(drm_helper_crtc_in_use);
/**
- * drm_disable_unused_functions - disable unused objects
+ * drm_helper_disable_unused_functions - disable unused objects
* @dev: DRM device
*
* LOCKING:
if (encoder->crtc != crtc)
continue;
- DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
+ DRM_DEBUG("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
mode->name, mode->base.id);
encoder_funcs = encoder->helper_private;
encoder_funcs->mode_set(encoder, mode, adjusted_mode);
/*
* we shouldn't end up with no modes here.
*/
- WARN(!count, "No connectors reported connected with modes\n");
+ if (count == 0)
+ printk(KERN_INFO "No connectors reported connected with modes\n");
drm_setup_crtcs(dev);
int drm_helper_resume_force_mode(struct drm_device *dev)
{
struct drm_crtc *crtc;
+ struct drm_encoder *encoder;
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ struct drm_crtc_helper_funcs *crtc_funcs;
int ret;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (ret == false)
DRM_ERROR("failed to set mode on crtc %p\n", crtc);
+
+ /* Turn off outputs that were already powered off */
+ if (drm_helper_choose_crtc_dpms(crtc)) {
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+ if(encoder->crtc != crtc)
+ continue;
+
+ encoder_funcs = encoder->helper_private;
+ if (encoder_funcs->dpms)
+ (*encoder_funcs->dpms) (encoder,
+ drm_helper_choose_encoder_dpms(encoder));
+
+ crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
+ }
+ }
}
/* disable the unused connectors while restoring the modesetting */
drm_helper_disable_unused_functions(dev);
return NULL;
}
if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
- printk(KERN_WARNING "integrated sync not supported\n");
- return NULL;
+ printk(KERN_WARNING "composite sync not supported\n");
}
/* it is incorrect if hsync/vsync width is zero */
struct drm_device *dev = connector->dev;
struct cvt_timing *cvt;
const int rates[] = { 60, 85, 75, 60, 50 };
+ const u8 empty[3] = { 0, 0, 0 };
for (i = 0; i < 4; i++) {
int uninitialized_var(width), height;
cvt = &(timing->data.other_data.data.cvt[i]);
- height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2;
- switch (cvt->code[1] & 0xc0) {
+ if (!memcmp(cvt->code, empty, 3))
+ continue;
+
+ height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2;
+ switch (cvt->code[1] & 0x0c) {
case 0x00:
width = height * 4 / 3;
break;
- case 0x40:
+ case 0x04:
width = height * 16 / 9;
break;
- case 0x80:
+ case 0x08:
width = height * 16 / 10;
break;
- case 0xc0:
+ case 0x0c:
width = height * 15 / 9;
break;
}
force = DRM_FORCE_ON;
break;
case 'D':
- if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) ||
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) &&
(connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
force = DRM_FORCE_ON;
else
break;
/* Display: Off; HSync: On, VSync: On */
case FB_BLANK_NORMAL:
- drm_fb_helper_off(info, DRM_MODE_DPMS_ON);
+ drm_fb_helper_off(info, DRM_MODE_DPMS_STANDBY);
break;
/* Display: Off; HSync: Off, VSync: On */
case FB_BLANK_HSYNC_SUSPEND:
return -EINVAL;
/* Need to resize the fb object !!! */
- if (var->xres > fb->width || var->yres > fb->height) {
- DRM_ERROR("Requested width/height is greater than current fb "
- "object %dx%d > %dx%d\n", var->xres, var->yres,
- fb->width, fb->height);
- DRM_ERROR("Need resizing code.\n");
+ if (var->bits_per_pixel > fb->bits_per_pixel || var->xres > fb->width || var->yres > fb->height) {
+ DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb "
+ "object %dx%d-%d > %dx%d-%d\n", var->xres, var->yres, var->bits_per_pixel,
+ fb->width, fb->height, fb->bits_per_pixel);
return -EINVAL;
}
if (IS_ERR(obj->filp))
goto free;
- /* Basically we want to disable the OOM killer and handle ENOMEM
- * ourselves by sacrificing pages from cached buffers.
- * XXX shmem_file_[gs]et_gfp_mask()
- */
- mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping,
- GFP_HIGHUSER |
- __GFP_COLD |
- __GFP_FS |
- __GFP_RECLAIMABLE |
- __GFP_NORETRY |
- __GFP_NOWARN |
- __GFP_NOMEMALLOC);
-
kref_init(&obj->refcount);
kref_init(&obj->handlecount);
obj->size = size;
dev->num_crtcs = 0;
}
+EXPORT_SYMBOL(drm_vblank_cleanup);
int drm_vblank_init(struct drm_device *dev, int num_crtcs)
{
}
dev->vblank_disable_allowed = 0;
-
return 0;
err:
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
+ /* vblank is not initialized (IRQ not installed ?) */
+ if (!dev->num_crtcs)
+ return;
/*
* To avoid all the problems that might happen if interrupts
* were enabled/disabled around or between these calls, we just
/*
- * The list_sort function is (presumably) licensed under the GPL (see the
- * top level "COPYING" file for details).
- *
- * The remainder of this file is:
- *
* Copyright © 1997-2003 by The XFree86 Project, Inc.
* Copyright © 2007 Dave Airlie
* Copyright © 2007-2008 Intel Corporation
*/
#include <linux/list.h>
+#include <linux/list_sort.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
/**
* drm_mode_compare - compare modes for favorability
+ * @priv: unused
* @lh_a: list_head for first mode
* @lh_b: list_head for second mode
*
* Negative if @lh_a is better than @lh_b, zero if they're equivalent, or
* positive if @lh_b is better than @lh_a.
*/
-static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b)
+static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head *lh_b)
{
struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head);
struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head);
return diff;
}
-/* FIXME: what we don't have a list sort function? */
-/* list sort from Mark J Roberts (mjr@znex.org) */
-void list_sort(struct list_head *head,
- int (*cmp)(struct list_head *a, struct list_head *b))
-{
- struct list_head *p, *q, *e, *list, *tail, *oldhead;
- int insize, nmerges, psize, qsize, i;
-
- list = head->next;
- list_del(head);
- insize = 1;
- for (;;) {
- p = oldhead = list;
- list = tail = NULL;
- nmerges = 0;
-
- while (p) {
- nmerges++;
- q = p;
- psize = 0;
- for (i = 0; i < insize; i++) {
- psize++;
- q = q->next == oldhead ? NULL : q->next;
- if (!q)
- break;
- }
-
- qsize = insize;
- while (psize > 0 || (qsize > 0 && q)) {
- if (!psize) {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- } else if (!qsize || !q) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else if (cmp(p, q) <= 0) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- }
- if (tail)
- tail->next = e;
- else
- list = e;
- e->prev = tail;
- tail = e;
- }
- p = q;
- }
-
- tail->next = list;
- list->prev = tail;
-
- if (nmerges <= 1)
- break;
-
- insize *= 2;
- }
-
- head->next = list;
- head->prev = list->prev;
- list->prev->next = head;
- list->prev = head;
-}
-
/**
* drm_mode_sort - sort mode list
* @mode_list: list to sort
*/
void drm_mode_sort(struct list_head *mode_list)
{
- list_sort(mode_list, drm_mode_compare);
+ list_sort(NULL, mode_list, drm_mode_compare);
}
EXPORT_SYMBOL(drm_mode_sort);
/**
* \brief Allocate a PCI consistent memory block, for DMA.
*/
-drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align,
- dma_addr_t maxaddr)
+drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align)
{
drm_dma_handle_t *dmah;
#if 1
if (align > size)
return NULL;
- if (pci_set_dma_mask(dev->pdev, maxaddr) != 0) {
- DRM_ERROR("Setting pci dma mask failed\n");
- return NULL;
- }
-
dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL);
if (!dmah)
return NULL;
mem = kmap_atomic(pages[page], KM_USER0);
for (i = 0; i < PAGE_SIZE; i += 4)
seq_printf(m, "%08x : %08x\n", i, mem[i / 4]);
- kunmap_atomic(pages[page], KM_USER0);
+ kunmap_atomic(mem, KM_USER0);
}
}
list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
obj = obj_priv->obj;
if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret) {
DRM_ERROR("Failed to get pages: %d\n", ret);
spin_unlock(&dev_priv->mm.active_list_lock);
return 0;
}
-static int i915_registers_info(struct seq_file *m, void *data) {
- struct drm_info_node *node = (struct drm_info_node *) m->private;
- struct drm_device *dev = node->minor->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t reg;
-
-#define DUMP_RANGE(start, end) \
- for (reg=start; reg < end; reg += 4) \
- seq_printf(m, "%08x\t%08x\n", reg, I915_READ(reg));
-
- DUMP_RANGE(0x00000, 0x00fff); /* VGA registers */
- DUMP_RANGE(0x02000, 0x02fff); /* instruction, memory, interrupt control registers */
- DUMP_RANGE(0x03000, 0x031ff); /* FENCE and PPGTT control registers */
- DUMP_RANGE(0x03200, 0x03fff); /* frame buffer compression registers */
- DUMP_RANGE(0x05000, 0x05fff); /* I/O control registers */
- DUMP_RANGE(0x06000, 0x06fff); /* clock control registers */
- DUMP_RANGE(0x07000, 0x07fff); /* 3D internal debug registers */
- DUMP_RANGE(0x07400, 0x088ff); /* GPE debug registers */
- DUMP_RANGE(0x0a000, 0x0afff); /* display palette registers */
- DUMP_RANGE(0x10000, 0x13fff); /* MMIO MCHBAR */
- DUMP_RANGE(0x30000, 0x3ffff); /* overlay registers */
- DUMP_RANGE(0x60000, 0x6ffff); /* display engine pipeline registers */
- DUMP_RANGE(0x70000, 0x72fff); /* display and cursor registers */
- DUMP_RANGE(0x73000, 0x73fff); /* performance counters */
-
- return 0;
-}
-
static int
i915_wedged_open(struct inode *inode,
struct file *filp)
}
static struct drm_info_list i915_debugfs_list[] = {
- {"i915_regs", i915_registers_info, 0},
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
drm_i915_private_t *dev_priv = dev->dev_private;
/* Program Hardware Status Page */
dev_priv->status_page_dmah =
- drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff);
+ drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE);
if (!dev_priv->status_page_dmah) {
DRM_ERROR("Can not allocate hardware status page\n");
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+ if (IS_I965G(dev))
+ dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
+ 0xf0;
+
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
case I915_PARAM_HAS_PAGEFLIPPING:
value = 1;
break;
+ case I915_PARAM_HAS_EXECBUF2:
+ /* depends on GEM */
+ value = dev_priv->has_gem;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
- param->param);
+ param->param);
return -EINVAL;
}
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mm_node *compressed_fb, *compressed_llb;
- unsigned long cfb_base, ll_base;
+ unsigned long cfb_base;
+ unsigned long ll_base = 0;
/* Leave 1M for line length buffer & misc. */
compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
- if (IS_MOBILE(dev) || IS_I9XX(dev))
- dev_priv->cursor_needs_physical = true;
- else
- dev_priv->cursor_needs_physical = false;
-
- if (IS_I965G(dev) || IS_G33(dev))
- dev_priv->cursor_needs_physical = false;
-
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
if (ret)
goto destroy_ringbuffer;
+ intel_modeset_init(dev);
+
ret = drm_irq_install(dev);
if (ret)
goto destroy_ringbuffer;
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
- intel_modeset_init(dev);
-
drm_helper_initial_config(dev);
return 0;
{
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
- int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+ int ret = 0, mmio_bar;
uint32_t agp_size, prealloc_size, prealloc_start;
/* i915 has 4 more counters */
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
+ dev_priv->info = (struct intel_device_info *) flags;
/* Add register map (needed for suspend/resume) */
+ mmio_bar = IS_I9XX(dev) ? 0 : 1;
base = drm_get_resource_start(dev, mmio_bar);
size = drm_get_resource_len(dev, mmio_bar);
DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH),
#include "i915_drm.h"
#include "i915_drv.h"
-#include "drm_pciids.h"
#include <linux/console.h>
#include "drm_crtc_helper.h"
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0400);
+unsigned int i915_lvds_downclock = 0;
+module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+
static struct drm_driver driver;
-static struct pci_device_id pciidlist[] = {
- i915_PCI_IDS
+#define INTEL_VGA_DEVICE(id, info) { \
+ .class = PCI_CLASS_DISPLAY_VGA << 8, \
+ .class_mask = 0xffff00, \
+ .vendor = 0x8086, \
+ .device = id, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .driver_data = (unsigned long) info }
+
+const static struct intel_device_info intel_i830_info = {
+ .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_845g_info = {
+ .is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i85x_info = {
+ .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i865g_info = {
+ .is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i915g_info = {
+ .is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i915gm_info = {
+ .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945g_info = {
+ .is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945gm_info = {
+ .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i965g_info = {
+ .is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_i965gm_info = {
+ .is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
+ .is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g33_info = {
+ .is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g45_info = {
+ .is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_gm45_info = {
+ .is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
+ .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_pineview_info = {
+ .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_d_info = {
+ .is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_m_info = {
+ .is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
+ .need_gfx_hws = 1, .has_rc6 = 1,
+ .has_hotplug = 1,
+};
+
+const static struct pci_device_id pciidlist[] = {
+ INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
+ INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
+ INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
+ INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
+ INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
+ INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),
+ INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),
+ INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),
+ INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),
+ INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),
+ INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),
+ INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),
+ INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),
+ INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
+ INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
+ INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
+ INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
+ {0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
return i915_resume(dev);
}
+static int
+i915_pm_suspend(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND);
+}
+
+static int
+i915_pm_resume(struct device *dev)
+{
+ return i915_pci_resume(to_pci_dev(dev));
+}
+
+static int
+i915_pm_freeze(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE);
+}
+
+static int
+i915_pm_thaw(struct device *dev)
+{
+ /* thaw during hibernate, do nothing! */
+ return 0;
+}
+
+static int
+i915_pm_poweroff(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE);
+}
+
+static int
+i915_pm_restore(struct device *dev)
+{
+ return i915_pci_resume(to_pci_dev(dev));
+}
+
+const struct dev_pm_ops i915_pm_ops = {
+ .suspend = i915_pm_suspend,
+ .resume = i915_pm_resume,
+ .freeze = i915_pm_freeze,
+ .thaw = i915_pm_thaw,
+ .poweroff = i915_pm_poweroff,
+ .restore = i915_pm_restore,
+};
+
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
+
+ /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
+
.device_is_agp = i915_driver_device_is_agp,
.enable_vblank = i915_enable_vblank,
.disable_vblank = i915_disable_vblank,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
-#ifdef CONFIG_PM
- .resume = i915_pci_resume,
- .suspend = i915_pci_suspend,
-#endif
+ .driver.pm = &i915_pm_ops,
},
.name = DRIVER_NAME,
struct intel_overlay;
+struct intel_device_info {
+ u8 is_mobile : 1;
+ u8 is_i8xx : 1;
+ u8 is_i915g : 1;
+ u8 is_i9xx : 1;
+ u8 is_i945gm : 1;
+ u8 is_i965g : 1;
+ u8 is_i965gm : 1;
+ u8 is_g33 : 1;
+ u8 need_gfx_hws : 1;
+ u8 is_g4x : 1;
+ u8 is_pineview : 1;
+ u8 is_ironlake : 1;
+ u8 has_fbc : 1;
+ u8 has_rc6 : 1;
+ u8 has_pipe_cxsr : 1;
+ u8 has_hotplug : 1;
+ u8 cursor_needs_physical : 1;
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
+ const struct intel_device_info *info;
+
int has_gem;
void __iomem *regs;
int hangcheck_count;
uint32_t last_acthd;
- bool cursor_needs_physical;
-
struct drm_mm vram;
unsigned long cfb_size;
unsigned int lvds_use_ssc:1;
unsigned int edp_support:1;
int lvds_ssc_freq;
+ int edp_bpp;
struct notifier_block lid_notifier;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
u32 saveDSPARB;
- u32 saveRENDERSTANDBY;
- u32 savePWRCTXA;
u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u16 orig_clock;
int child_dev_num;
struct child_device_config *child_dev;
+ struct drm_connector *int_lvds_connector;
} drm_i915_private_t;
/** driver private structure attached to each drm_gem_object */
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern unsigned int i915_lvds_downclock;
extern void i915_save_display(struct drm_device *dev);
extern void i915_restore_display(struct drm_device *dev);
struct drm_file *file_priv);
int i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int i915_gem_execbuffer2(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
+int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj);
int i915_gem_attach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj, int id);
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj);
void i915_gem_free_all_phys_object(struct drm_device *dev);
-int i915_gem_object_get_pages(struct drm_gem_object *obj);
+int i915_gem_object_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
void i915_gem_object_put_pages(struct drm_gem_object *obj);
void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
void i915_gem_object_flush_write_domain(struct drm_gem_object *obj);
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
+bool i915_tiling_ok(struct drm_device *dev, int stride, int size,
+ int tiling_mode);
+bool i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
extern int i915_wrap_ring(struct drm_device * dev);
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
-#define IS_I830(dev) ((dev)->pci_device == 0x3577)
-#define IS_845G(dev) ((dev)->pci_device == 0x2562)
-#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
-#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
-#define IS_I8XX(dev) (IS_I830(dev) || IS_845G(dev) || IS_I85X(dev) || IS_I865G(dev))
-
-#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
-#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
-#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
- (dev)->pci_device == 0x27AE)
-#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
- (dev)->pci_device == 0x2982 || \
- (dev)->pci_device == 0x2992 || \
- (dev)->pci_device == 0x29A2 || \
- (dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12 || \
- (dev)->pci_device == 0x2A42 || \
- (dev)->pci_device == 0x2E02 || \
- (dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22 || \
- (dev)->pci_device == 0x2E32 || \
- (dev)->pci_device == 0x2E42 || \
- (dev)->pci_device == 0x0042 || \
- (dev)->pci_device == 0x0046)
-
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12)
-
-#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
-
-#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
- (dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22 || \
- (dev)->pci_device == 0x2E32 || \
- (dev)->pci_device == 0x2E42 || \
- IS_GM45(dev))
-
-#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
-#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
-#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev))
-
-#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
- (dev)->pci_device == 0x29B2 || \
- (dev)->pci_device == 0x29D2 || \
- (IS_PINEVIEW(dev)))
-
+#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
+
+#define IS_I830(dev) ((dev)->pci_device == 0x3577)
+#define IS_845G(dev) ((dev)->pci_device == 0x2562)
+#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
+#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
+#define IS_I8XX(dev) (INTEL_INFO(dev)->is_i8xx)
+#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
+#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
+#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
+#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm)
+#define IS_I965G(dev) (INTEL_INFO(dev)->is_i965g)
+#define IS_I965GM(dev) (INTEL_INFO(dev)->is_i965gm)
+#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x)
+#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
+#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
+#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview)
+#define IS_G33(dev) (INTEL_INFO(dev)->is_g33)
#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
-#define IS_IRONLAKE(dev) (IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev))
-
-#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
- IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
- IS_IRONLAKE(dev))
+#define IS_IRONLAKE(dev) (INTEL_INFO(dev)->is_ironlake)
+#define IS_I9XX(dev) (INTEL_INFO(dev)->is_i9xx)
+#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
-#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
- IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
- IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev))
+#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
- IS_IRONLAKE(dev))
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
*/
#define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev))
#define SUPPORTS_TV(dev) (IS_I9XX(dev) && IS_MOBILE(dev) && \
!IS_IRONLAKE(dev) && !IS_PINEVIEW(dev))
-#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
+#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug)
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev))
-#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
-#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
- (IS_I9XX(dev) || IS_GM45(dev)) && \
- !IS_PINEVIEW(dev) && \
- !IS_IRONLAKE(dev))
-#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev))
+#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
+#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define I915_HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret != 0)
goto fail_unlock;
return ret;
}
-static inline gfp_t
-i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj)
-{
- return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping);
-}
-
-static inline void
-i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp)
-{
- mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp);
-}
-
static int
i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj)
{
int ret;
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, __GFP_NORETRY | __GFP_NOWARN);
/* If we've insufficient memory to map in the pages, attempt
* to make some space by throwing out some old buffers.
*/
if (ret == -ENOMEM) {
struct drm_device *dev = obj->dev;
- gfp_t gfp;
ret = i915_gem_evict_something(dev, obj->size);
if (ret)
return ret;
- gfp = i915_gem_object_get_page_gfp_mask(obj);
- i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY);
- ret = i915_gem_object_get_pages(obj);
- i915_gem_object_set_page_gfp_mask (obj, gfp);
+ ret = i915_gem_object_get_pages(obj, 0);
}
return ret;
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret != 0)
goto fail_unlock;
/* blow away mappings if mapped through GTT */
i915_gem_release_mmap(obj);
- if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- i915_gem_clear_fence_reg(obj);
-
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
BUG_ON(obj_priv->active);
+ /* release the fence reg _after_ flushing */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+ i915_gem_clear_fence_reg(obj);
+
if (obj_priv->agp_mem != NULL) {
drm_unbind_agp(obj_priv->agp_mem);
drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
}
int
-i915_gem_object_get_pages(struct drm_gem_object *obj)
+i915_gem_object_get_pages(struct drm_gem_object *obj,
+ gfp_t gfpmask)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int page_count, i;
inode = obj->filp->f_path.dentry->d_inode;
mapping = inode->i_mapping;
for (i = 0; i < page_count; i++) {
- page = read_mapping_page(mapping, i, NULL);
+ page = read_cache_page_gfp(mapping, i,
+ mapping_gfp_mask (mapping) |
+ __GFP_COLD |
+ gfpmask);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
i915_gem_object_put_pages(obj);
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_mm_node *free_space;
- bool retry_alloc = false;
+ gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN;
int ret;
- if (dev_priv->mm.suspended)
- return -EBUSY;
-
if (obj_priv->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to bind a purgeable object\n");
return -EINVAL;
DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
- if (retry_alloc) {
- i915_gem_object_set_page_gfp_mask (obj,
- i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY);
- }
- ret = i915_gem_object_get_pages(obj);
- if (retry_alloc) {
- i915_gem_object_set_page_gfp_mask (obj,
- i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY);
- }
+ ret = i915_gem_object_get_pages(obj, gfpmask);
if (ret) {
drm_mm_put_block(obj_priv->gtt_space);
obj_priv->gtt_space = NULL;
ret = i915_gem_evict_something(dev, obj->size);
if (ret) {
/* now try to shrink everyone else */
- if (! retry_alloc) {
- retry_alloc = true;
- goto search_free;
+ if (gfpmask) {
+ gfpmask = 0;
+ goto search_free;
}
return ret;
return 0;
}
+/*
+ * Prepare buffer for display plane. Use uninterruptible for possible flush
+ * wait, as in modesetting process we're not supposed to be interrupted.
+ */
+int
+i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_write_domain, old_read_domains;
+ int ret;
+
+ /* Not valid to be called on unbound objects. */
+ if (obj_priv->gtt_space == NULL)
+ return -EINVAL;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+
+ /* Wait on any GPU rendering and flushing to occur. */
+ if (obj_priv->active) {
+#if WATCH_BUF
+ DRM_INFO("%s: object %p wait for seqno %08x\n",
+ __func__, obj, obj_priv->last_rendering_seqno);
+#endif
+ ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+ if (ret != 0)
+ return ret;
+ }
+
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
+ obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+ i915_gem_object_flush_cpu_write_domain(obj);
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+ obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ obj->write_domain = I915_GEM_DOMAIN_GTT;
+ obj_priv->dirty = 1;
+
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
+ return 0;
+}
+
/**
* Moves a single object to the CPU read, and possibly write domain.
*
static int
i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
struct drm_file *file_priv,
- struct drm_i915_gem_exec_object *entry,
+ struct drm_i915_gem_exec_object2 *entry,
struct drm_i915_gem_relocation_entry *relocs)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int i, ret;
void __iomem *reloc_page;
+ bool need_fence;
+
+ need_fence = entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
+
+ /* Check fence reg constraints and rebind if necessary */
+ if (need_fence && !i915_obj_fenceable(dev, obj))
+ i915_gem_object_unbind(obj);
/* Choose the GTT offset for our buffer and put it there. */
ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
if (ret)
return ret;
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle blits to/from tiled surfaces.
+ */
+ if (need_fence) {
+ ret = i915_gem_object_get_fence_reg(obj);
+ if (ret != 0) {
+ if (ret != -EBUSY && ret != -ERESTARTSYS)
+ DRM_ERROR("Failure to install fence: %d\n",
+ ret);
+ i915_gem_object_unpin(obj);
+ return ret;
+ }
+ }
+
entry->offset = obj_priv->gtt_offset;
/* Apply the relocations, using the GTT aperture to avoid cache
*/
static int
i915_dispatch_gem_execbuffer(struct drm_device *dev,
- struct drm_i915_gem_execbuffer *exec,
+ struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset)
{
}
static int
-i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object2 *exec_list,
uint32_t buffer_count,
struct drm_i915_gem_relocation_entry **relocs)
{
}
*relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
- if (*relocs == NULL)
+ if (*relocs == NULL) {
+ DRM_ERROR("failed to alloc relocs, count %d\n", reloc_count);
return -ENOMEM;
+ }
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
}
static int
-i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list,
uint32_t buffer_count,
struct drm_i915_gem_relocation_entry *relocs)
{
}
static int
-i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec,
+i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer2 *exec,
uint64_t exec_offset)
{
uint32_t exec_start, exec_len;
}
int
-i915_gem_execbuffer(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+i915_gem_do_execbuffer(struct drm_device *dev, void *data,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_execbuffer2 *args,
+ struct drm_i915_gem_exec_object2 *exec_list)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_execbuffer *args = data;
- struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_gem_object **object_list = NULL;
struct drm_gem_object *batch_obj;
struct drm_i915_gem_object *obj_priv;
struct drm_clip_rect *cliprects = NULL;
struct drm_i915_gem_relocation_entry *relocs;
- int ret, ret2, i, pinned = 0;
+ int ret = 0, ret2, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains, reloc_index;
int pin_tries, flips;
DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
- /* Copy in the exec list from userland */
- exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count);
- if (exec_list == NULL || object_list == NULL) {
- DRM_ERROR("Failed to allocate exec or object list "
- "for %d buffers\n",
+ if (object_list == NULL) {
+ DRM_ERROR("Failed to allocate object list for %d buffers\n",
args->buffer_count);
ret = -ENOMEM;
goto pre_mutex_err;
}
- ret = copy_from_user(exec_list,
- (struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- sizeof(*exec_list) * args->buffer_count);
- if (ret != 0) {
- DRM_ERROR("copy %d exec entries failed %d\n",
- args->buffer_count, ret);
- goto pre_mutex_err;
- }
if (args->num_cliprects != 0) {
cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
mutex_unlock(&dev->struct_mutex);
- if (!ret) {
- /* Copy the new buffer offsets back to the user's exec list. */
- ret = copy_to_user((struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- exec_list,
- sizeof(*exec_list) * args->buffer_count);
- if (ret) {
- ret = -EFAULT;
- DRM_ERROR("failed to copy %d exec entries "
- "back to user (%d)\n",
- args->buffer_count, ret);
- }
- }
-
/* Copy the updated relocations out regardless of current error
* state. Failure to update the relocs would mean that the next
* time userland calls execbuf, it would do so with presumed offset
pre_mutex_err:
drm_free_large(object_list);
- drm_free_large(exec_list);
kfree(cliprects);
return ret;
}
+/*
+ * Legacy execbuffer just creates an exec2 list from the original exec object
+ * list array and passes it to the real function.
+ */
+int
+i915_gem_execbuffer(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_execbuffer *args = data;
+ struct drm_i915_gem_execbuffer2 exec2;
+ struct drm_i915_gem_exec_object *exec_list = NULL;
+ struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+ int ret, i;
+
+#if WATCH_EXEC
+ DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+ (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+ if (args->buffer_count < 1) {
+ DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
+ return -EINVAL;
+ }
+
+ /* Copy in the exec list from userland */
+ exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
+ exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+ if (exec_list == NULL || exec2_list == NULL) {
+ DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+ args->buffer_count);
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return -ENOMEM;
+ }
+ ret = copy_from_user(exec_list,
+ (struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret != 0) {
+ DRM_ERROR("copy %d exec entries failed %d\n",
+ args->buffer_count, ret);
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return -EFAULT;
+ }
+
+ for (i = 0; i < args->buffer_count; i++) {
+ exec2_list[i].handle = exec_list[i].handle;
+ exec2_list[i].relocation_count = exec_list[i].relocation_count;
+ exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
+ exec2_list[i].alignment = exec_list[i].alignment;
+ exec2_list[i].offset = exec_list[i].offset;
+ if (!IS_I965G(dev))
+ exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
+ else
+ exec2_list[i].flags = 0;
+ }
+
+ exec2.buffers_ptr = args->buffers_ptr;
+ exec2.buffer_count = args->buffer_count;
+ exec2.batch_start_offset = args->batch_start_offset;
+ exec2.batch_len = args->batch_len;
+ exec2.DR1 = args->DR1;
+ exec2.DR4 = args->DR4;
+ exec2.num_cliprects = args->num_cliprects;
+ exec2.cliprects_ptr = args->cliprects_ptr;
+ exec2.flags = 0;
+
+ ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ for (i = 0; i < args->buffer_count; i++)
+ exec_list[i].offset = exec2_list[i].offset;
+ /* ... and back out to userspace */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec_list,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret) {
+ ret = -EFAULT;
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+ }
+
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return ret;
+}
+
+int
+i915_gem_execbuffer2(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_execbuffer2 *args = data;
+ struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+ int ret;
+
+#if WATCH_EXEC
+ DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+ (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+ if (args->buffer_count < 1) {
+ DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count);
+ return -EINVAL;
+ }
+
+ exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+ if (exec2_list == NULL) {
+ DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+ args->buffer_count);
+ return -ENOMEM;
+ }
+ ret = copy_from_user(exec2_list,
+ (struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ sizeof(*exec2_list) * args->buffer_count);
+ if (ret != 0) {
+ DRM_ERROR("copy %d exec entries failed %d\n",
+ args->buffer_count, ret);
+ drm_free_large(exec2_list);
+ return -EFAULT;
+ }
+
+ ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec2_list,
+ sizeof(*exec2_list) * args->buffer_count);
+ if (ret) {
+ ret = -EFAULT;
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+ }
+
+ drm_free_large(exec2_list);
+ return ret;
+}
+
int
i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
{
if (ret)
return ret;
}
- /*
- * Pre-965 chips need a fence register set up in order to
- * properly handle tiled surfaces.
- */
- if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
- ret = i915_gem_object_get_fence_reg(obj);
- if (ret != 0) {
- if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to install fence: %d\n",
- ret);
- return ret;
- }
- }
+
obj_priv->pin_count++;
/* If the object is not active and not pending a flush,
phys_obj->id = id;
- phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff);
+ phys_obj->handle = drm_pci_alloc(dev, size, 0);
if (!phys_obj->handle) {
ret = -ENOMEM;
goto kfree_obj;
if (!obj_priv->phys_obj)
return;
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret)
goto out;
obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1];
obj_priv->phys_obj->cur_obj = obj;
- ret = i915_gem_object_get_pages(obj);
+ ret = i915_gem_object_get_pages(obj, 0);
if (ret) {
DRM_ERROR("failed to get page list\n");
goto out;
/**
- * Returns the size of the fence for a tiled object of the given size.
+ * Returns whether an object is currently fenceable. If not, it may need
+ * to be unbound and have its pitch adjusted.
*/
-static int
-i915_get_fence_size(struct drm_device *dev, int size)
+bool
+i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj)
{
- int i;
- int start;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (IS_I965G(dev)) {
/* The 965 can have fences at any page boundary. */
- return ALIGN(size, 4096);
+ if (obj->size & 4095)
+ return false;
+ return true;
+ } else if (IS_I9XX(dev)) {
+ if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
+ return false;
} else {
- /* Align the size to a power of two greater than the smallest
- * fence size.
- */
- if (IS_I9XX(dev))
- start = 1024 * 1024;
- else
- start = 512 * 1024;
+ if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
+ return false;
+ }
- for (i = start; i < size; i <<= 1)
- ;
+ /* Power of two sized... */
+ if (obj->size & (obj->size - 1))
+ return false;
- return i;
- }
+ /* Objects must be size aligned as well */
+ if (obj_priv->gtt_offset & (obj->size - 1))
+ return false;
+ return true;
}
/* Check pitch constriants for all chips & tiling formats */
-static bool
+bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
int tile_width;
if (stride & (stride - 1))
return false;
- /* We don't 0handle the aperture area covered by the fence being bigger
- * than the object size.
- */
- if (i915_get_fence_size(dev, size) != size)
- return false;
-
return true;
}
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pch_iir;
- u32 new_de_iir, new_gt_iir, new_pch_iir;
struct drm_i915_master_private *master_priv;
/* disable master interrupt before clearing iir */
gt_iir = I915_READ(GTIIR);
pch_iir = I915_READ(SDEIIR);
- for (;;) {
- if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
- break;
-
- ret = IRQ_HANDLED;
+ if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
+ goto done;
- /* should clear PCH hotplug event before clear CPU irq */
- I915_WRITE(SDEIIR, pch_iir);
- new_pch_iir = I915_READ(SDEIIR);
-
- I915_WRITE(DEIIR, de_iir);
- new_de_iir = I915_READ(DEIIR);
- I915_WRITE(GTIIR, gt_iir);
- new_gt_iir = I915_READ(GTIIR);
-
- if (dev->primary->master) {
- master_priv = dev->primary->master->driver_priv;
- if (master_priv->sarea_priv)
- master_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- }
+ ret = IRQ_HANDLED;
- if (gt_iir & GT_USER_INTERRUPT) {
- u32 seqno = i915_get_gem_seqno(dev);
- dev_priv->mm.irq_gem_seqno = seqno;
- trace_i915_gem_request_complete(dev, seqno);
- DRM_WAKEUP(&dev_priv->irq_queue);
- }
+ if (dev->primary->master) {
+ master_priv = dev->primary->master->driver_priv;
+ if (master_priv->sarea_priv)
+ master_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+ }
- if (de_iir & DE_GSE)
- ironlake_opregion_gse_intr(dev);
+ if (gt_iir & GT_USER_INTERRUPT) {
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+ }
- /* check event from PCH */
- if ((de_iir & DE_PCH_EVENT) &&
- (pch_iir & SDE_HOTPLUG_MASK)) {
- queue_work(dev_priv->wq, &dev_priv->hotplug_work);
- }
+ if (de_iir & DE_GSE)
+ ironlake_opregion_gse_intr(dev);
- de_iir = new_de_iir;
- gt_iir = new_gt_iir;
- pch_iir = new_pch_iir;
+ /* check event from PCH */
+ if ((de_iir & DE_PCH_EVENT) &&
+ (pch_iir & SDE_HOTPLUG_MASK)) {
+ queue_work(dev_priv->wq, &dev_priv->hotplug_work);
}
+ /* should clear PCH hotplug event before clear CPU irq */
+ I915_WRITE(SDEIIR, pch_iir);
+ I915_WRITE(GTIIR, gt_iir);
+ I915_WRITE(DEIIR, de_iir);
+
+done:
I915_WRITE(DEIER, de_ier);
(void)I915_READ(DEIER);
(void) I915_READ(IER);
}
+/*
+ * Must be called after intel_modeset_init or hotplug interrupts won't be
+ * enabled correctly.
+ */
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- /* Leave other bits alone */
- hotplug_en |= HOTPLUG_EN_MASK;
+ /* Note HDMI and DP share bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+ /* Ignore TV since it's buggy */
+
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
- TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
- SDVOB_HOTPLUG_INT_STATUS;
- if (IS_G4X(dev)) {
- dev_priv->hotplug_supported_mask |=
- HDMIB_HOTPLUG_INT_STATUS |
- HDMIC_HOTPLUG_INT_STATUS |
- HDMID_HOTPLUG_INT_STATUS;
- }
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
#define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f
-#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \
- HDMIC_HOTPLUG_INT_EN | \
- HDMID_HOTPLUG_INT_EN | \
- SDVOB_HOTPLUG_INT_EN | \
- SDVOC_HOTPLUG_INT_EN | \
- CRT_HOTPLUG_INT_EN)
-
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* LVDS dithering flag on 965/g4x platform */
+#define LVDS_ENABLE_DITHER (1 << 25)
/* Enable border for unscaled (or aspect-scaled) display */
#define LVDS_BORDER_ENABLE (1 << 15)
/*
/* Display & cursor control */
+/* dithering flag on Ironlake */
+#define PIPE_ENABLE_DITHER (1 << 4)
/* Pipe A */
#define PIPEADSL 0x70000
#define PIPEACONF 0x70008
#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
#define DSPFW_CURSORA_MASK 0x00003f00
-#define DSPFW_CURSORA_SHIFT 16
+#define DSPFW_CURSORA_SHIFT 8
#define DSPFW3 0x7003c
#define DSPFW_HPLL_SR_EN (1<<31)
#define DSPFW_CURSOR_SR_SHIFT 24
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
- /* Render Standby */
- if (I915_HAS_RC6(dev)) {
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
- dev_priv->savePWRCTXA = I915_READ(PWRCTXA);
- }
-
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
- /* Render Standby */
- if (I915_HAS_RC6(dev)) {
- I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
- I915_WRITE(PWRCTXA, dev_priv->savePWRCTXA);
- }
-
/* Hardware status page */
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
#define SLAVE_ADDR1 0x70
#define SLAVE_ADDR2 0x72
+static int panel_type;
+
static void *
find_section(struct bdb_header *bdb, int section_id)
{
dev_priv->lvds_dither = lvds_options->pixel_dither;
if (lvds_options->panel_type == 0xff)
return;
+ panel_type = lvds_options->panel_type;
lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
if (!lvds_lfp_data)
memset(temp_mode, 0, sizeof(*temp_mode));
}
kfree(temp_mode);
- if (temp_downclock < panel_fixed_mode->clock) {
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
DRM_DEBUG_KMS("LVDS downclock is found in VBT. ",
dev_priv->render_reclock_avail = true;
}
+static void
+parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+ struct bdb_edp *edp;
+
+ edp = find_section(bdb, BDB_EDP);
+ if (!edp) {
+ if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) {
+ DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\
+ assume 18bpp panel color depth.\n");
+ dev_priv->edp_bpp = 18;
+ }
+ return;
+ }
+
+ switch ((edp->color_depth >> (panel_type * 2)) & 3) {
+ case EDP_18BPP:
+ dev_priv->edp_bpp = 18;
+ break;
+ case EDP_24BPP:
+ dev_priv->edp_bpp = 24;
+ break;
+ case EDP_30BPP:
+ dev_priv->edp_bpp = 30;
+ break;
+ }
+}
+
static void
parse_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
parse_sdvo_device_mapping(dev_priv, bdb);
parse_device_mapping(dev_priv, bdb);
parse_driver_features(dev_priv, bdb);
+ parse_edp(dev_priv, bdb);
pci_unmap_rom(pdev, bios);
#define BDB_SDVO_LVDS_PNP_IDS 24
#define BDB_SDVO_LVDS_POWER_SEQ 25
#define BDB_TV_OPTIONS 26
+#define BDB_EDP 27
#define BDB_LVDS_OPTIONS 40
#define BDB_LVDS_LFP_DATA_PTRS 41
#define BDB_LVDS_LFP_DATA 42
u8 custom_vbt_version;
} __attribute__((packed));
+#define EDP_18BPP 0
+#define EDP_24BPP 1
+#define EDP_30BPP 2
+#define EDP_RATE_1_62 0
+#define EDP_RATE_2_7 1
+#define EDP_LANE_1 0
+#define EDP_LANE_2 1
+#define EDP_LANE_4 3
+#define EDP_PREEMPHASIS_NONE 0
+#define EDP_PREEMPHASIS_3_5dB 1
+#define EDP_PREEMPHASIS_6dB 2
+#define EDP_PREEMPHASIS_9_5dB 3
+#define EDP_VSWING_0_4V 0
+#define EDP_VSWING_0_6V 1
+#define EDP_VSWING_0_8V 2
+#define EDP_VSWING_1_2V 3
+
+struct edp_power_seq {
+ u16 t3;
+ u16 t7;
+ u16 t9;
+ u16 t10;
+ u16 t12;
+} __attribute__ ((packed));
+
+struct edp_link_params {
+ u8 rate:4;
+ u8 lanes:4;
+ u8 preemphasis:4;
+ u8 vswing:4;
+} __attribute__ ((packed));
+
+struct bdb_edp {
+ struct edp_power_seq power_seqs[16];
+ u32 color_depth;
+ u32 sdrrs_msa_timing_delay;
+ struct edp_link_params link_params[16];
+} __attribute__ ((packed));
+
bool intel_init_bios(struct drm_device *dev);
/*
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
+
+ dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
}
intel_p2_t p2;
bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
int, int, intel_clock_t *);
- bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *,
- int, int, intel_clock_t *);
};
#define I8XX_DOT_MIN 25000
#define IRONLAKE_VCO_MIN 1760000
#define IRONLAKE_VCO_MAX 3510000
#define IRONLAKE_N_MIN 1
-#define IRONLAKE_N_MAX 5
+#define IRONLAKE_N_MAX 6
#define IRONLAKE_M_MIN 79
-#define IRONLAKE_M_MAX 118
+#define IRONLAKE_M_MAX 127
#define IRONLAKE_M1_MIN 12
-#define IRONLAKE_M1_MAX 23
+#define IRONLAKE_M1_MAX 22
#define IRONLAKE_M2_MIN 5
#define IRONLAKE_M2_MAX 9
#define IRONLAKE_P_SDVO_DAC_MIN 5
#define IRONLAKE_P2_LVDS_FAST 7 /* double channel */
#define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */
+#define IRONLAKE_P_DISPLAY_PORT_MIN 10
+#define IRONLAKE_P_DISPLAY_PORT_MAX 20
+#define IRONLAKE_P2_DISPLAY_PORT_FAST 10
+#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10
+#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0
+#define IRONLAKE_P1_DISPLAY_PORT_MIN 1
+#define IRONLAKE_P1_DISPLAY_PORT_MAX 2
+
static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
-static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i8xx_lvds = {
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i9xx_sdvo = {
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i9xx_lvds = {
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
/* below parameter and function is for G4X Chipset Family*/
.p2_fast = G4X_P2_SDVO_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_hdmi = {
.p2_fast = G4X_P2_HDMI_DAC_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
.p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
.p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_display_port = {
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_pineview_lvds = {
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_ironlake_sdvo = {
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
.p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW,
.p2_fast = IRONLAKE_P2_SDVO_DAC_FAST },
- .find_pll = intel_ironlake_find_best_PLL,
+ .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_lvds = {
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
.p2_slow = IRONLAKE_P2_LVDS_SLOW,
.p2_fast = IRONLAKE_P2_LVDS_FAST },
- .find_pll = intel_ironlake_find_best_PLL,
+ .find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_display_port = {
+ .dot = { .min = IRONLAKE_DOT_MIN,
+ .max = IRONLAKE_DOT_MAX },
+ .vco = { .min = IRONLAKE_VCO_MIN,
+ .max = IRONLAKE_VCO_MAX},
+ .n = { .min = IRONLAKE_N_MIN,
+ .max = IRONLAKE_N_MAX },
+ .m = { .min = IRONLAKE_M_MIN,
+ .max = IRONLAKE_M_MAX },
+ .m1 = { .min = IRONLAKE_M1_MIN,
+ .max = IRONLAKE_M1_MAX },
+ .m2 = { .min = IRONLAKE_M2_MIN,
+ .max = IRONLAKE_M2_MAX },
+ .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN,
+ .max = IRONLAKE_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN,
+ .max = IRONLAKE_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_ironlake_dp,
};
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
limit = &intel_limits_ironlake_lvds;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ HAS_eDP)
+ limit = &intel_limits_ironlake_display_port;
else
limit = &intel_limits_ironlake_sdvo;
return (err != target);
}
-
-static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
-
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- int err = target;
- bool found = false;
-
- memcpy(&clock, best_clock, sizeof(intel_clock_t));
-
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
- for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) {
- /* m1 is always 0 in Pineview */
- if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
- break;
- for (clock.n = limit->n.min; clock.n <= limit->n.max;
- clock.n++) {
- int this_err;
-
- intel_clock(dev, refclk, &clock);
-
- if (!intel_PLL_is_valid(crtc, &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- found = true;
- }
- }
- }
- }
-
- return found;
-}
-
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
found = false;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ int lvds_reg;
+
+ if (IS_IRONLAKE(dev))
+ lvds_reg = PCH_LVDS;
+ else
+ lvds_reg = LVDS;
+ if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
clock.p2 = limit->p2.p2_fast;
else
{
struct drm_device *dev = crtc->dev;
intel_clock_t clock;
+
+ /* return directly when it is eDP */
+ if (HAS_eDP)
+ return true;
+
if (target < 200000) {
clock.n = 1;
clock.p1 = 2;
return true;
}
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- intel_clock_t clock;
- int err_most = 47;
- int err_min = 10000;
-
- /* eDP has only 2 clock choice, no n/m/p setting */
- if (HAS_eDP)
- return true;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
- return intel_find_pll_ironlake_dp(limit, crtc, target,
- refclk, best_clock);
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
- for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
- /* based on hardware requriment prefer smaller n to precision */
- for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
- /* based on hardware requirment prefere larger m1,m2 */
- for (clock.m1 = limit->m1.max;
- clock.m1 >= limit->m1.min; clock.m1--) {
- for (clock.m2 = limit->m2.max;
- clock.m2 >= limit->m2.min; clock.m2--) {
- int this_err;
-
- intel_clock(dev, refclk, &clock);
- if (!intel_PLL_is_valid(crtc, &clock))
- continue;
- this_err = abs((10000 - (target*10000/clock.dot)));
- if (this_err < err_most) {
- *best_clock = clock;
- /* found on first matching */
- goto out;
- } else if (this_err < err_min) {
- *best_clock = clock;
- err_min = this_err;
- }
- }
- }
- }
- }
-out:
- return true;
-}
-
/* DisplayPort has only two frequencies, 162MHz and 270MHz */
static bool
intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
return ret;
}
- ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+ ret = i915_gem_object_set_to_display_plane(obj);
if (ret != 0) {
i915_gem_object_unpin(obj);
mutex_unlock(&dev->struct_mutex);
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
u32 temp;
int tries = 5, j, n;
+ u32 pipe_bpc;
+
+ temp = I915_READ(pipeconf_reg);
+ pipe_bpc = temp & PIPE_BPC_MASK;
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
temp = I915_READ(fdi_rx_reg);
+ /*
+ * make the BPC in FDI Rx be consistent with that in
+ * pipeconf reg.
+ */
+ temp &= ~(0x7 << 16);
+ temp |= (pipe_bpc << 11);
I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
FDI_SEL_PCDCLK |
FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
/* enable PCH transcoder */
temp = I915_READ(transconf_reg);
+ /*
+ * make the BPC in transcoder be consistent with
+ * that in pipeconf reg.
+ */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
I915_READ(transconf_reg);
I915_READ(fdi_tx_reg);
temp = I915_READ(fdi_rx_reg);
+ /* BPC in FDI rx is consistent with that in pipeconf */
+ temp &= ~(0x07 << 16);
+ temp |= (pipe_bpc << 11);
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
I915_READ(fdi_rx_reg);
}
}
}
-
+ temp = I915_READ(transconf_reg);
+ /* BPC in transcoder is consistent with that in pipeconf */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
+ I915_WRITE(transconf_reg, temp);
+ I915_READ(transconf_reg);
udelay(100);
/* disable PCH DPLL */
* A value of 5us seems to be a good balance; safe for very low end
* platforms but not overly aggressive on lower latency configs.
*/
-const static int latency_ns = 5000;
+static const int latency_ns = 5000;
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
/* Calc sr entries for one plane configs */
if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 12000;
+ static const int sr_latency_ns = 12000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
/* Calc sr entries for one plane configs */
if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 12000;
+ static const int sr_latency_ns = 12000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
if (HAS_FW_BLC(dev) && sr_hdisplay &&
(!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 6000;
+ static const int sr_latency_ns = 6000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
return -EINVAL;
}
- if (is_lvds && limit->find_reduced_pll &&
- dev_priv->lvds_downclock_avail) {
- memcpy(&reduced_clock, &clock, sizeof(intel_clock_t));
- has_reduced_clock = limit->find_reduced_pll(limit, crtc,
+ if (is_lvds && dev_priv->lvds_downclock_avail) {
+ has_reduced_clock = limit->find_pll(limit, crtc,
dev_priv->lvds_downclock,
refclk,
&reduced_clock);
/* determine panel color depth */
temp = I915_READ(pipeconf_reg);
+ temp &= ~PIPE_BPC_MASK;
+ if (is_lvds) {
+ int lvds_reg = I915_READ(PCH_LVDS);
+ /* the BPC will be 6 if it is 18-bit LVDS panel */
+ if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+ temp |= PIPE_8BPC;
+ else
+ temp |= PIPE_6BPC;
+ } else if (is_edp) {
+ switch (dev_priv->edp_bpp/3) {
+ case 8:
+ temp |= PIPE_8BPC;
+ break;
+ case 10:
+ temp |= PIPE_10BPC;
+ break;
+ case 6:
+ temp |= PIPE_6BPC;
+ break;
+ case 12:
+ temp |= PIPE_12BPC;
+ break;
+ }
+ } else
+ temp |= PIPE_8BPC;
+ I915_WRITE(pipeconf_reg, temp);
+ I915_READ(pipeconf_reg);
switch (temp & PIPE_BPC_MASK) {
case PIPE_8BPC:
* appropriately here, but we need to look more thoroughly into how
* panels behave in the two modes.
*/
-
+ /* set the dithering flag */
+ if (IS_I965G(dev)) {
+ if (dev_priv->lvds_dither) {
+ if (IS_IRONLAKE(dev))
+ pipeconf |= PIPE_ENABLE_DITHER;
+ else
+ lvds |= LVDS_ENABLE_DITHER;
+ } else {
+ if (IS_IRONLAKE(dev))
+ pipeconf &= ~PIPE_ENABLE_DITHER;
+ else
+ lvds &= ~LVDS_ENABLE_DITHER;
+ }
+ }
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
/* we only need to pin inside GTT if cursor is non-phy */
mutex_lock(&dev->struct_mutex);
- if (!dev_priv->cursor_needs_physical) {
+ if (!dev_priv->info->cursor_needs_physical) {
ret = i915_gem_object_pin(bo, PAGE_SIZE);
if (ret) {
DRM_ERROR("failed to pin cursor bo\n");
I915_WRITE(base, addr);
if (intel_crtc->cursor_bo) {
- if (dev_priv->cursor_needs_physical) {
+ if (dev_priv->info->cursor_needs_physical) {
if (intel_crtc->cursor_bo != bo)
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
queue_work(dev_priv->wq, &dev_priv->idle_work);
}
-void intel_increase_renderclock(struct drm_device *dev, bool schedule)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (IS_IRONLAKE(dev))
- return;
-
- if (!dev_priv->render_reclock_avail) {
- DRM_DEBUG_DRIVER("not reclocking render clock\n");
- return;
- }
-
- /* Restore render clock frequency to original value */
- if (IS_G4X(dev) || IS_I9XX(dev))
- pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock);
- else if (IS_I85X(dev))
- pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock);
- DRM_DEBUG_DRIVER("increasing render clock frequency\n");
-
- /* Schedule downclock */
- if (schedule)
- mod_timer(&dev_priv->idle_timer, jiffies +
- msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-}
-
-void intel_decrease_renderclock(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (IS_IRONLAKE(dev))
- return;
-
- if (!dev_priv->render_reclock_avail) {
- DRM_DEBUG_DRIVER("not reclocking render clock\n");
- return;
- }
-
- if (IS_G4X(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK;
- gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I965G(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I965_GC_RENDER_CLOCK_MASK;
- gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I945G(dev) || IS_I945GM(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I945_GC_RENDER_CLOCK_MASK;
- gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I915G(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I915_GC_RENDER_CLOCK_MASK;
- gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I85X(dev)) {
- u16 hpllcc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, HPLLCC, &hpllcc);
-
- /* Up to maximum... */
- hpllcc &= ~GC_CLOCK_CONTROL_MASK;
- hpllcc |= GC_CLOCK_133_200;
-
- pci_write_config_word(dev->pdev, HPLLCC, hpllcc);
- }
- DRM_DEBUG_DRIVER("decreasing render clock frequency\n");
-}
-
-/* Note that no increase function is needed for this - increase_renderclock()
- * will also rewrite these bits
- */
-void intel_decrease_displayclock(struct drm_device *dev)
-{
- if (IS_IRONLAKE(dev))
- return;
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) ||
- IS_I915GM(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~0xf0;
- gcfgc |= 0x80;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- }
-}
-
#define CRTC_IDLE_TIMEOUT 1000 /* ms */
static void intel_crtc_idle_timer(unsigned long arg)
mutex_lock(&dev->struct_mutex);
- /* GPU isn't processing, downclock it. */
- if (!dev_priv->busy) {
- intel_decrease_renderclock(dev);
- intel_decrease_displayclock(dev);
- }
-
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
/* Skip inactive CRTCs */
if (!crtc->fb)
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
- if (!dev_priv->busy) {
+ if (!dev_priv->busy)
dev_priv->busy = true;
- intel_increase_renderclock(dev, true);
- } else {
+ else
mod_timer(&dev_priv->idle_timer, jiffies +
msecs_to_jiffies(GPU_IDLE_TIMEOUT));
- }
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!crtc->fb)
bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ DRM_DEBUG_KMS("probing SDVOB\n");
found = intel_sdvo_init(dev, SDVOB);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+ if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+ DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, SDVOB);
+ }
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
+ DRM_DEBUG_KMS("probing DP_B\n");
intel_dp_init(dev, DP_B);
+ }
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (I915_READ(SDVOB) & SDVO_DETECTED)
+ if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ DRM_DEBUG_KMS("probing SDVOC\n");
found = intel_sdvo_init(dev, SDVOC);
+ }
if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
- if (SUPPORTS_INTEGRATED_HDMI(dev))
+ if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+ DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
intel_hdmi_init(dev, SDVOC);
- if (SUPPORTS_INTEGRATED_DP(dev))
+ }
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ DRM_DEBUG_KMS("probing DP_C\n");
intel_dp_init(dev, DP_C);
+ }
}
- if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ if (SUPPORTS_INTEGRATED_DP(dev) &&
+ (I915_READ(DP_D) & DP_DETECTED)) {
+ DRM_DEBUG_KMS("probing DP_D\n");
intel_dp_init(dev, DP_D);
+ }
} else if (IS_I8XX(dev))
intel_dvo_init(dev);
.fb_changed = intelfb_probe,
};
+static struct drm_gem_object *
+intel_alloc_power_context(struct drm_device *dev)
+{
+ struct drm_gem_object *pwrctx;
+ int ret;
+
+ pwrctx = drm_gem_object_alloc(dev, 4096);
+ if (!pwrctx) {
+ DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
+ return NULL;
+ }
+
+ mutex_lock(&dev->struct_mutex);
+ ret = i915_gem_object_pin(pwrctx, 4096);
+ if (ret) {
+ DRM_ERROR("failed to pin power context: %d\n", ret);
+ goto err_unref;
+ }
+
+ ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1);
+ if (ret) {
+ DRM_ERROR("failed to set-domain on power context: %d\n", ret);
+ goto err_unpin;
+ }
+ mutex_unlock(&dev->struct_mutex);
+
+ return pwrctx;
+
+err_unpin:
+ i915_gem_object_unpin(pwrctx);
+err_unref:
+ drm_gem_object_unreference(pwrctx);
+ mutex_unlock(&dev->struct_mutex);
+ return NULL;
+}
+
void intel_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
* GPU can automatically power down the render unit if given a page
* to save state.
*/
- if (I915_HAS_RC6(dev)) {
- struct drm_gem_object *pwrctx;
- struct drm_i915_gem_object *obj_priv;
- int ret;
+ if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
+ struct drm_i915_gem_object *obj_priv = NULL;
if (dev_priv->pwrctx) {
obj_priv = dev_priv->pwrctx->driver_private;
} else {
- pwrctx = drm_gem_object_alloc(dev, 4096);
- if (!pwrctx) {
- DRM_DEBUG("failed to alloc power context, "
- "RC6 disabled\n");
- goto out;
- }
+ struct drm_gem_object *pwrctx;
- ret = i915_gem_object_pin(pwrctx, 4096);
- if (ret) {
- DRM_ERROR("failed to pin power context: %d\n",
- ret);
- drm_gem_object_unreference(pwrctx);
- goto out;
+ pwrctx = intel_alloc_power_context(dev);
+ if (pwrctx) {
+ dev_priv->pwrctx = pwrctx;
+ obj_priv = pwrctx->driver_private;
}
-
- i915_gem_object_set_to_gtt_domain(pwrctx, 1);
-
- dev_priv->pwrctx = pwrctx;
- obj_priv = pwrctx->driver_private;
}
- I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
- I915_WRITE(MCHBAR_RENDER_STANDBY,
- I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+ if (obj_priv) {
+ I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
+ I915_WRITE(MCHBAR_RENDER_STANDBY,
+ I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+ }
}
-
-out:
- return;
}
/* Set up chip specific display functions */
del_timer_sync(&intel_crtc->idle_timer);
}
- intel_increase_renderclock(dev, false);
del_timer_sync(&dev_priv->idle_timer);
if (dev_priv->display.disable_fbc)
/* I think this is a fiction */
static int
-intel_dp_link_required(int pixel_clock)
+intel_dp_link_required(struct drm_device *dev,
+ struct intel_output *intel_output, int pixel_clock)
{
- return pixel_clock * 3;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_eDP(intel_output))
+ return (pixel_clock * dev_priv->edp_bpp) / 8;
+ else
+ return pixel_clock * 3;
}
static int
int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
int max_lanes = intel_dp_max_lane_count(intel_output);
- if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ if (intel_dp_link_required(connector->dev, intel_output, mode->clock)
+ > max_link_clock * max_lanes)
return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
- if (intel_dp_link_required(mode->clock) <= link_avail) {
+ if (intel_dp_link_required(encoder->dev, intel_output, mode->clock)
+ <= link_avail) {
dp_priv->link_bw = bws[clock];
dp_priv->lane_count = lane_count;
adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
intel_dp_check_link_status(intel_output);
}
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given DP is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it is assumed that the given
- * DP is present.
- */
-static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct child_device_config *p_child;
- int i, dp_port, ret;
-
- if (!dev_priv->child_dev_num)
- return 1;
-
- dp_port = 0;
- if (dp_reg == DP_B || dp_reg == PCH_DP_B)
- dp_port = PORT_IDPB;
- else if (dp_reg == DP_C || dp_reg == PCH_DP_C)
- dp_port = PORT_IDPC;
- else if (dp_reg == DP_D || dp_reg == PCH_DP_D)
- dp_port = PORT_IDPD;
-
- ret = 0;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
- /*
- * If the device type is not DP, continue.
- */
- if (p_child->device_type != DEVICE_TYPE_DP &&
- p_child->device_type != DEVICE_TYPE_eDP)
- continue;
- /* Find the eDP port */
- if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) {
- ret = 1;
- break;
- }
- /* Find the DP port */
- if (p_child->dvo_port == dp_port) {
- ret = 1;
- break;
- }
- }
- return ret;
-}
+
void
intel_dp_init(struct drm_device *dev, int output_reg)
{
struct intel_dp_priv *dp_priv;
const char *name = NULL;
- if (!dp_is_present_in_vbt(dev, output_reg)) {
- DRM_DEBUG_KMS("DP is not present. Ignore it\n");
- return;
- }
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
if (!intel_output)
else if (output_reg == DP_D || output_reg == PCH_DP_D)
intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
- if (IS_eDP(intel_output)) {
- intel_output->crtc_mask = (1 << 1);
+ if (IS_eDP(intel_output))
intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
- } else
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
break;
case DP_B:
case PCH_DP_B:
+ dev_priv->hotplug_supported_mask |=
+ HDMIB_HOTPLUG_INT_STATUS;
name = "DPDDC-B";
break;
case DP_C:
case PCH_DP_C:
+ dev_priv->hotplug_supported_mask |=
+ HDMIC_HOTPLUG_INT_STATUS;
name = "DPDDC-C";
break;
case DP_D:
case PCH_DP_D:
+ dev_priv->hotplug_supported_mask |=
+ HDMID_HOTPLUG_INT_STATUS;
name = "DPDDC-D";
break;
}
.destroy = intel_hdmi_enc_destroy,
};
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given HDMI is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it assumes that the given
- * HDMI is present.
- */
-static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct child_device_config *p_child;
- int i, hdmi_port, ret;
-
- if (!dev_priv->child_dev_num)
- return 1;
-
- if (hdmi_reg == SDVOB)
- hdmi_port = DVO_B;
- else if (hdmi_reg == SDVOC)
- hdmi_port = DVO_C;
- else if (hdmi_reg == HDMIB)
- hdmi_port = DVO_B;
- else if (hdmi_reg == HDMIC)
- hdmi_port = DVO_C;
- else if (hdmi_reg == HDMID)
- hdmi_port = DVO_D;
- else
- return 0;
-
- ret = 0;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
- /*
- * If the device type is not HDMI, continue.
- */
- if (p_child->device_type != DEVICE_TYPE_HDMI)
- continue;
- /* Find the HDMI port */
- if (p_child->dvo_port == hdmi_port) {
- ret = 1;
- break;
- }
- }
- return ret;
-}
void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_output *intel_output;
struct intel_hdmi_priv *hdmi_priv;
- if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) {
- DRM_DEBUG_KMS("HDMI is not present. Ignored it \n");
- return;
- }
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL);
if (!intel_output)
if (sdvox_reg == SDVOB) {
intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
+ dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == SDVOC) {
intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+ dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIB) {
intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
+ dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIC) {
intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
+ dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMID) {
intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
+ dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
}
if (!intel_output->ddc_bus)
goto err_connector;
/* Some lid devices report incorrect lid status, assume they're connected */
static const struct dmi_system_id bad_lid_status[] = {
+ {
+ .ident = "Compaq nx9020",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "3084"),
+ },
+ },
+ {
+ .ident = "Samsung SX20S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
+ },
+ },
{
.ident = "Aspire One",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
},
},
+ {
+ .ident = "PC-81005",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
+ },
+ },
{ }
};
struct drm_i915_private *dev_priv =
container_of(nb, struct drm_i915_private, lid_notifier);
struct drm_device *dev = dev_priv->dev;
+ struct drm_connector *connector = dev_priv->int_lvds_connector;
+ /*
+ * check and update the status of LVDS connector after receiving
+ * the LID nofication event.
+ */
+ if (connector)
+ connector->status = connector->funcs->detect(connector);
if (!acpi_lid_open()) {
dev_priv->modeset_on_lid = 1;
return NOTIFY_OK;
{ } /* terminating entry */
};
-#ifdef CONFIG_ACPI
-/*
- * check_lid_device -- check whether @handle is an ACPI LID device.
- * @handle: ACPI device handle
- * @level : depth in the ACPI namespace tree
- * @context: the number of LID device when we find the device
- * @rv: a return value to fill if desired (Not use)
- */
-static acpi_status
-check_lid_device(acpi_handle handle, u32 level, void *context,
- void **return_value)
-{
- struct acpi_device *acpi_dev;
- int *lid_present = context;
-
- acpi_dev = NULL;
- /* Get the acpi device for device handle */
- if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
- /* If there is no ACPI device for handle, return */
- return AE_OK;
- }
-
- if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
- *lid_present = 1;
-
- return AE_OK;
-}
-
-/**
- * check whether there exists the ACPI LID device by enumerating the ACPI
- * device tree.
- */
-static int intel_lid_present(void)
-{
- int lid_present = 0;
-
- if (acpi_disabled) {
- /* If ACPI is disabled, there is no ACPI device tree to
- * check, so assume the LID device would have been present.
- */
- return 1;
- }
-
- acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- check_lid_device, NULL, &lid_present, NULL);
-
- return lid_present;
-}
-#else
-static int intel_lid_present(void)
-{
- /* In the absence of ACPI built in, assume that the LID device would
- * have been present.
- */
- return 1;
-}
-#endif
-
/**
* intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
* @dev: drm device
}
}
mutex_unlock(&dev->mode_config.mutex);
- if (temp_downclock < panel_fixed_mode->clock) {
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
/* We found the downclock for LVDS. */
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
if (dmi_check_system(intel_no_lvds))
return;
- /*
- * Assume LVDS is present if there's an ACPI lid device or if the
- * device is present in the VBT.
- */
- if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) {
- DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n");
+ if (!lvds_is_present_in_vbt(dev)) {
+ DRM_DEBUG_KMS("LVDS is not present in VBT\n");
return;
}
DRM_DEBUG_KMS("lid notifier registration failed\n");
dev_priv->lid_notifier.notifier_call = NULL;
}
+ /* keep the LVDS connector */
+ dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
return;
}
/**
- * Don't check status code from this as it switches the bus back to the
- * SDVO chips which defeats the purpose of doing a bus switch in the first
- * place.
+ * Try to read the response after issuie the DDC switch command. But it
+ * is noted that we must do the action of reading response and issuing DDC
+ * switch command in one I2C transaction. Otherwise when we try to start
+ * another I2C transaction after issuing the DDC bus switch, it will be
+ * switched to the internal SDVO register.
*/
static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output,
u8 target)
{
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = 0,
+ .len = 2,
+ .buf = out_buf,
+ },
+ /* the following two are to read the response */
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = 0,
+ .len = 1,
+ .buf = cmd_buf,
+ },
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = ret_value,
+ },
+ };
+
+ intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+ &target, 1);
+ /* write the DDC switch command argument */
+ intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target);
+
+ out_buf[0] = SDVO_I2C_OPCODE;
+ out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
+ cmd_buf[0] = SDVO_I2C_CMD_STATUS;
+ cmd_buf[1] = 0;
+ ret_value[0] = 0;
+ ret_value[1] = 0;
+
+ ret = i2c_transfer(intel_output->i2c_bus, msgs, 3);
+ if (ret != 3) {
+ /* failure in I2C transfer */
+ DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+ return;
+ }
+ if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("DDC switch command returns response %d\n",
+ ret_value[0]);
+ return;
+ }
+ return;
}
static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
+ /* This is only applied to SDVO cards with multiple outputs */
+ if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) {
+ uint8_t saved_ddc, temp_ddc;
+ saved_ddc = sdvo_priv->ddc_bus;
+ temp_ddc = sdvo_priv->ddc_bus >> 1;
+ /*
+ * Don't use the 1 as the argument of DDC bus switch to get
+ * the EDID. It is used for SDVO SPD ROM.
+ */
+ while(temp_ddc > 1) {
+ sdvo_priv->ddc_bus = temp_ddc;
+ edid = drm_get_edid(&intel_output->base,
+ intel_output->ddc_bus);
+ if (edid) {
+ /*
+ * When we can get the EDID, maybe it is the
+ * correct DDC bus. Update it.
+ */
+ sdvo_priv->ddc_bus = temp_ddc;
+ break;
+ }
+ temp_ddc >>= 1;
+ }
+ if (edid == NULL)
+ sdvo_priv->ddc_bus = saved_ddc;
+ }
/* when there is no edid and no monitor is connected with VGA
* port, try to use the CRT ddc to read the EDID for DVI-connector
*/
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOB/VGA DDC BUS");
+ dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
} else {
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOC/VGA DDC BUS");
+ dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
}
if (intel_output->ddc_bus == NULL)
via debugfs.
menu "I2C encoder or helper chips"
- depends on DRM && I2C
+ depends on DRM && DRM_KMS_HELPER && I2C
config DRM_I2C_CH7006
tristate "Chrontel ch7006 TV encoder"
- depends on DRM_NOUVEAU
- default m
+ default m if DRM_NOUVEAU
help
Support for Chrontel ch7006 and similar TV encoders, found
on some nVidia video cards.
struct drm_device *dev = bios->dev;
/* C51 has misaligned regs on purpose. Marvellous */
- if (reg & 0x2 || (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51)) {
- NV_ERROR(dev, "========== misaligned reg 0x%08X ==========\n",
- reg);
- return 0;
- }
- /*
- * Warn on C51 regs that have not been verified accessible in
- * mmiotracing
- */
+ if (reg & 0x2 ||
+ (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51))
+ NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
+
+ /* warn on C51 regs that haven't been verified accessible in tracing */
if (reg & 0x1 && dev_priv->VBIOS.pub.chip_version == 0x51 &&
reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
reg);
- /* Trust the init scripts on G80 */
- if (dev_priv->card_type >= NV_50)
- return 1;
-
- #define WITHIN(x, y, z) ((x >= y) && (x < y + z))
- if (WITHIN(reg, NV_PMC_OFFSET, NV_PMC_SIZE))
- return 1;
- if (WITHIN(reg, NV_PBUS_OFFSET, NV_PBUS_SIZE))
- return 1;
- if (WITHIN(reg, NV_PFIFO_OFFSET, NV_PFIFO_SIZE))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x30 &&
- (WITHIN(reg, 0x4000, 0x600) || reg == 0x00004600))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x40 &&
- WITHIN(reg, 0xc000, 0x48))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0000d204)
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x40) {
- if (reg == 0x00011014 || reg == 0x00020328)
- return 1;
- if (WITHIN(reg, 0x88000, NV_PBUS_SIZE)) /* new PBUS */
- return 1;
+ if (reg >= (8*1024*1024)) {
+ NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
+ return 0;
}
- if (WITHIN(reg, NV_PFB_OFFSET, NV_PFB_SIZE))
- return 1;
- if (WITHIN(reg, NV_PEXTDEV_OFFSET, NV_PEXTDEV_SIZE))
- return 1;
- if (WITHIN(reg, NV_PCRTC0_OFFSET, NV_PCRTC0_SIZE * 2))
- return 1;
- if (WITHIN(reg, NV_PRAMDAC0_OFFSET, NV_PRAMDAC0_SIZE * 2))
- return 1;
- if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0070fff0)
- return 1;
- if (dev_priv->VBIOS.pub.chip_version == 0x51 &&
- WITHIN(reg, NV_PRAMIN_OFFSET, NV_PRAMIN_SIZE))
- return 1;
- #undef WITHIN
- NV_ERROR(dev, "========== unknown reg 0x%08X ==========\n", reg);
-
- return 0;
+ return 1;
}
static bool
}
#ifdef __powerpc__
/* Powerbook specific quirks */
- if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0329))
- nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
- if ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329) {
- if (script == LVDS_PANEL_ON) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) | (1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
- }
- if (script == LVDS_PANEL_OFF) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) & ~(1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
+ if ((dev->pci_device & 0xffff) == 0x0179 ||
+ (dev->pci_device & 0xffff) == 0x0189 ||
+ (dev->pci_device & 0xffff) == 0x0329) {
+ if (script == LVDS_RESET) {
+ nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
+
+ } else if (script == LVDS_PANEL_ON) {
+ bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
+ bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
+ | (1 << 31));
+ bios_wr32(bios, NV_PCRTC_GPIO_EXT,
+ bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
+
+ } else if (script == LVDS_PANEL_OFF) {
+ bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
+ bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
+ & ~(1 << 31));
+ bios_wr32(bios, NV_PCRTC_GPIO_EXT,
+ bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
}
}
#endif
parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb,
uint32_t conn, uint32_t conf, struct dcb_entry *entry)
{
- if (conn != 0xf0003f00 && conn != 0xf2247f10 && conn != 0xf2204001 &&
- conn != 0xf2204301 && conn != 0xf2204311 && conn != 0xf2208001 &&
- conn != 0xf2244001 && conn != 0xf2244301 && conn != 0xf2244311 &&
- conn != 0xf4204011 && conn != 0xf4208011 && conn != 0xf4248011 &&
- conn != 0xf2045ff2 && conn != 0xf2045f14 && conn != 0xf207df14 &&
- conn != 0xf2205004 && conn != 0xf2209004) {
- NV_ERROR(dev, "Unknown DCB 1.5 entry, please report\n");
-
- /* cause output setting to fail for !TV, so message is seen */
- if ((conn & 0xf) != 0x1)
- dcb->entries = 0;
-
- return false;
- }
- /* most of the below is a "best guess" atm */
- entry->type = conn & 0xf;
- if (entry->type == 2)
- /* another way of specifying straps based lvds... */
+ switch (conn & 0x0000000f) {
+ case 0:
+ entry->type = OUTPUT_ANALOG;
+ break;
+ case 1:
+ entry->type = OUTPUT_TV;
+ break;
+ case 2:
+ case 3:
entry->type = OUTPUT_LVDS;
- if (entry->type == 4) { /* digital */
- if (conn & 0x10)
- entry->type = OUTPUT_LVDS;
- else
+ break;
+ case 4:
+ switch ((conn & 0x000000f0) >> 4) {
+ case 0:
entry->type = OUTPUT_TMDS;
+ break;
+ case 1:
+ entry->type = OUTPUT_LVDS;
+ break;
+ default:
+ NV_ERROR(dev, "Unknown DCB subtype 4/%d\n",
+ (conn & 0x000000f0) >> 4);
+ return false;
+ }
+ break;
+ default:
+ NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
+ return false;
}
- /* what's in bits 5-13? could be some encoder maker thing, in tv case */
- entry->i2c_index = (conn >> 14) & 0xf;
- /* raw heads field is in range 0-1, so move to 1-2 */
- entry->heads = ((conn >> 18) & 0x7) + 1;
- entry->location = (conn >> 21) & 0xf;
- /* unused: entry->bus = (conn >> 25) & 0x7; */
- /* set or to be same as heads -- hopefully safe enough */
- entry->or = entry->heads;
+
+ entry->i2c_index = (conn & 0x0003c000) >> 14;
+ entry->heads = ((conn & 0x001c0000) >> 18) + 1;
+ entry->or = entry->heads; /* same as heads, hopefully safe enough */
+ entry->location = (conn & 0x01e00000) >> 21;
+ entry->bus = (conn & 0x0e000000) >> 25;
entry->duallink_possible = false;
switch (entry->type) {
case OUTPUT_ANALOG:
entry->crtconf.maxfreq = (conf & 0xffff) * 10;
break;
- case OUTPUT_LVDS:
- /*
- * This is probably buried in conn's unknown bits.
- * This will upset EDID-ful models, if they exist
- */
- entry->lvdsconf.use_straps_for_mode = true;
- entry->lvdsconf.use_power_scripts = true;
+ case OUTPUT_TV:
+ entry->tvconf.has_component_output = false;
break;
case OUTPUT_TMDS:
/*
*/
fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
break;
- case OUTPUT_TV:
- entry->tvconf.has_component_output = false;
+ case OUTPUT_LVDS:
+ if ((conn & 0x00003f00) != 0x10)
+ entry->lvdsconf.use_straps_for_mode = true;
+ entry->lvdsconf.use_power_scripts = true;
+ break;
+ default:
break;
}
dcb->entries = newentries;
}
-static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
+static int
+parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
struct bios_parsed_dcb *bdcb = &bios->bdcb;
struct parsed_dcb *dcb;
- uint16_t dcbptr, i2ctabptr = 0;
+ uint16_t dcbptr = 0, i2ctabptr = 0;
uint8_t *dcbtable;
uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES;
bool configblock = true;
dcb->entries = 0;
/* get the offset from 0x36 */
- dcbptr = ROM16(bios->data[0x36]);
+ if (dev_priv->card_type > NV_04) {
+ dcbptr = ROM16(bios->data[0x36]);
+ if (dcbptr == 0x0000)
+ NV_WARN(dev, "No output data (DCB) found in BIOS\n");
+ }
+ /* this situation likely means a really old card, pre DCB */
if (dcbptr == 0x0) {
- NV_WARN(dev, "No output data (DCB) found in BIOS, "
- "assuming a CRT output exists\n");
- /* this situation likely means a really old card, pre DCB */
+ NV_INFO(dev, "Assuming a CRT output exists\n");
fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
- if (nv04_tv_identify(dev,
- bios->legacy.i2c_indices.tv) >= 0)
+ if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
fabricate_tv_output(dcb, twoHeads);
return 0;
#include "nouveau_drv.h"
#include "nouveau_dma.h"
+#include <linux/log2.h>
+
static void
nouveau_bo_del_ttm(struct ttm_buffer_object *bo)
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct drm_device *dev = dev_priv->dev;
struct nouveau_bo *nvbo = nouveau_bo(bo);
ttm_bo_kunmap(&nvbo->kmap);
if (unlikely(nvbo->gem))
DRM_ERROR("bo %p still attached to GEM object\n", bo);
+ if (nvbo->tile)
+ nv10_mem_expire_tiling(dev, nvbo->tile, NULL);
+
spin_lock(&dev_priv->ttm.bo_list_lock);
list_del(&nvbo->head);
spin_unlock(&dev_priv->ttm.bo_list_lock);
kfree(nvbo);
}
+static void
+nouveau_bo_fixup_align(struct drm_device *dev,
+ uint32_t tile_mode, uint32_t tile_flags,
+ int *align, int *size)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ /*
+ * Some of the tile_flags have a periodic structure of N*4096 bytes,
+ * align to to that as well as the page size. Overallocate memory to
+ * avoid corruption of other buffer objects.
+ */
+ if (dev_priv->card_type == NV_50) {
+ uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15;
+ int i;
+
+ switch (tile_flags) {
+ case 0x1800:
+ case 0x2800:
+ case 0x4800:
+ case 0x7a00:
+ *size = roundup(*size, block_size);
+ if (is_power_of_2(block_size)) {
+ *size += 3 * block_size;
+ for (i = 1; i < 10; i++) {
+ *align = 12 * i * block_size;
+ if (!(*align % 65536))
+ break;
+ }
+ } else {
+ *size += 6 * block_size;
+ for (i = 1; i < 10; i++) {
+ *align = 8 * i * block_size;
+ if (!(*align % 65536))
+ break;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ } else {
+ if (tile_mode) {
+ if (dev_priv->chipset >= 0x40) {
+ *align = 65536;
+ *size = roundup(*size, 64 * tile_mode);
+
+ } else if (dev_priv->chipset >= 0x30) {
+ *align = 32768;
+ *size = roundup(*size, 64 * tile_mode);
+
+ } else if (dev_priv->chipset >= 0x20) {
+ *align = 16384;
+ *size = roundup(*size, 64 * tile_mode);
+
+ } else if (dev_priv->chipset >= 0x10) {
+ *align = 16384;
+ *size = roundup(*size, 32 * tile_mode);
+ }
+ }
+ }
+
+ /* ALIGN works only on powers of two. */
+ *size = roundup(*size, PAGE_SIZE);
+
+ if (dev_priv->card_type == NV_50) {
+ *size = roundup(*size, 65536);
+ *align = max(65536, *align);
+ }
+}
+
int
nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan,
int size, int align, uint32_t flags, uint32_t tile_mode,
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_bo *nvbo;
- int ret, n = 0;
+ int ret = 0;
nvbo = kzalloc(sizeof(struct nouveau_bo), GFP_KERNEL);
if (!nvbo)
nvbo->tile_mode = tile_mode;
nvbo->tile_flags = tile_flags;
- /*
- * Some of the tile_flags have a periodic structure of N*4096 bytes,
- * align to to that as well as the page size. Overallocate memory to
- * avoid corruption of other buffer objects.
- */
- switch (tile_flags) {
- case 0x1800:
- case 0x2800:
- case 0x4800:
- case 0x7a00:
- if (dev_priv->chipset >= 0xA0) {
- /* This is based on high end cards with 448 bits
- * memory bus, could be different elsewhere.*/
- size += 6 * 28672;
- /* 8 * 28672 is the actual alignment requirement,
- * but we must also align to page size. */
- align = 2 * 8 * 28672;
- } else if (dev_priv->chipset >= 0x90) {
- size += 3 * 16384;
- align = 12 * 16834;
- } else {
- size += 3 * 8192;
- /* 12 * 8192 is the actual alignment requirement,
- * but we must also align to page size. */
- align = 2 * 12 * 8192;
- }
- break;
- default:
- break;
- }
-
+ nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size);
align >>= PAGE_SHIFT;
- size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
- if (dev_priv->card_type == NV_50) {
- size = (size + 65535) & ~65535;
- if (align < (65536 / PAGE_SIZE))
- align = (65536 / PAGE_SIZE);
- }
-
- if (flags & TTM_PL_FLAG_VRAM)
- nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING;
- if (flags & TTM_PL_FLAG_TT)
- nvbo->placements[n++] = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
nvbo->placement.fpfn = 0;
nvbo->placement.lpfn = mappable ? dev_priv->fb_mappable_pages : 0;
- nvbo->placement.placement = nvbo->placements;
- nvbo->placement.busy_placement = nvbo->placements;
- nvbo->placement.num_placement = n;
- nvbo->placement.num_busy_placement = n;
+ nouveau_bo_placement_set(nvbo, flags);
nvbo->channel = chan;
- nouveau_bo_placement_set(nvbo, flags);
ret = ttm_bo_init(&dev_priv->ttm.bdev, &nvbo->bo, size,
ttm_bo_type_device, &nvbo->placement, align, 0,
false, NULL, size, nouveau_bo_del_ttm);
/* GPU-assisted copy using NV_MEMORY_TO_MEMORY_FORMAT, can access
* TTM_PL_{VRAM,TT} directly.
*/
+
static int
nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan,
struct nouveau_bo *nvbo, bool evict, bool no_wait,
ret = ttm_bo_move_accel_cleanup(&nvbo->bo, fence, NULL,
evict, no_wait, new_mem);
+ if (nvbo->channel && nvbo->channel != chan)
+ ret = nouveau_fence_wait(fence, NULL, false, false);
nouveau_fence_unref((void *)&fence);
return ret;
}
}
static int
-nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait,
- struct ttm_mem_reg *old_mem, struct ttm_mem_reg *new_mem)
+nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, bool intr,
+ int no_wait, struct ttm_mem_reg *new_mem)
{
struct nouveau_bo *nvbo = nouveau_bo(bo);
struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct ttm_mem_reg *old_mem = &bo->mem;
struct nouveau_channel *chan;
uint64_t src_offset, dst_offset;
uint32_t page_count;
placement.fpfn = placement.lpfn = 0;
placement.num_placement = placement.num_busy_placement = 1;
- placement.placement = &placement_memtype;
+ placement.placement = placement.busy_placement = &placement_memtype;
tmp_mem = *new_mem;
tmp_mem.mm_node = NULL;
if (ret)
goto out;
- ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, &tmp_mem);
+ ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, &tmp_mem);
if (ret)
goto out;
placement.fpfn = placement.lpfn = 0;
placement.num_placement = placement.num_busy_placement = 1;
- placement.placement = &placement_memtype;
+ placement.placement = placement.busy_placement = &placement_memtype;
tmp_mem = *new_mem;
tmp_mem.mm_node = NULL;
if (ret)
goto out;
- ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, new_mem);
+ ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem);
if (ret)
goto out;
}
static int
-nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr,
- bool no_wait, struct ttm_mem_reg *new_mem)
+nouveau_bo_vm_bind(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem,
+ struct nouveau_tile_reg **new_tile)
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
- struct nouveau_bo *nvbo = nouveau_bo(bo);
struct drm_device *dev = dev_priv->dev;
- struct ttm_mem_reg *old_mem = &bo->mem;
+ struct nouveau_bo *nvbo = nouveau_bo(bo);
+ uint64_t offset;
int ret;
- if (dev_priv->card_type == NV_50 && new_mem->mem_type == TTM_PL_VRAM &&
- !nvbo->no_vm) {
- uint64_t offset = new_mem->mm_node->start << PAGE_SHIFT;
+ if (nvbo->no_vm || new_mem->mem_type != TTM_PL_VRAM) {
+ /* Nothing to do. */
+ *new_tile = NULL;
+ return 0;
+ }
+
+ offset = new_mem->mm_node->start << PAGE_SHIFT;
+ if (dev_priv->card_type == NV_50) {
ret = nv50_mem_vm_bind_linear(dev,
offset + dev_priv->vm_vram_base,
new_mem->size, nvbo->tile_flags,
offset);
if (ret)
return ret;
+
+ } else if (dev_priv->card_type >= NV_10) {
+ *new_tile = nv10_mem_set_tiling(dev, offset, new_mem->size,
+ nvbo->tile_mode);
}
+ return 0;
+}
+
+static void
+nouveau_bo_vm_cleanup(struct ttm_buffer_object *bo,
+ struct nouveau_tile_reg *new_tile,
+ struct nouveau_tile_reg **old_tile)
+{
+ struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct drm_device *dev = dev_priv->dev;
+
+ if (dev_priv->card_type >= NV_10 &&
+ dev_priv->card_type < NV_50) {
+ if (*old_tile)
+ nv10_mem_expire_tiling(dev, *old_tile, bo->sync_obj);
+
+ *old_tile = new_tile;
+ }
+}
+
+static int
+nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr,
+ bool no_wait, struct ttm_mem_reg *new_mem)
+{
+ struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct nouveau_bo *nvbo = nouveau_bo(bo);
+ struct ttm_mem_reg *old_mem = &bo->mem;
+ struct nouveau_tile_reg *new_tile = NULL;
+ int ret = 0;
+
+ ret = nouveau_bo_vm_bind(bo, new_mem, &new_tile);
+ if (ret)
+ return ret;
+
+ /* Software copy if the card isn't up and running yet. */
if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE ||
- !dev_priv->channel)
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ !dev_priv->channel) {
+ ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ goto out;
+ }
+ /* Fake bo copy. */
if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) {
BUG_ON(bo->mem.mm_node != NULL);
bo->mem = *new_mem;
new_mem->mm_node = NULL;
- return 0;
+ goto out;
}
- if (new_mem->mem_type == TTM_PL_SYSTEM) {
- if (old_mem->mem_type == TTM_PL_SYSTEM)
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- if (nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem))
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- } else if (old_mem->mem_type == TTM_PL_SYSTEM) {
- if (nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem))
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- } else {
- if (nouveau_bo_move_m2mf(bo, evict, no_wait, old_mem, new_mem))
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- }
+ /* Hardware assisted copy. */
+ if (new_mem->mem_type == TTM_PL_SYSTEM)
+ ret = nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem);
+ else if (old_mem->mem_type == TTM_PL_SYSTEM)
+ ret = nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem);
+ else
+ ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem);
- return 0;
+ if (!ret)
+ goto out;
+
+ /* Fallback to software copy. */
+ ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+
+out:
+ if (ret)
+ nouveau_bo_vm_cleanup(bo, NULL, &new_tile);
+ else
+ nouveau_bo_vm_cleanup(bo, new_tile, &nvbo->tile);
+
+ return ret;
}
static int
return ret;
}
+ nouveau_dma_pre_init(chan);
+
/* Locate channel's user control regs */
if (dev_priv->card_type < NV_40)
user = NV03_USER(channel);
return 0;
}
-int
-nouveau_channel_idle(struct nouveau_channel *chan)
-{
- struct drm_device *dev = chan->dev;
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_engine *engine = &dev_priv->engine;
- uint32_t caches;
- int idle;
-
- if (!chan) {
- NV_ERROR(dev, "no channel...\n");
- return 1;
- }
-
- caches = nv_rd32(dev, NV03_PFIFO_CACHES);
- nv_wr32(dev, NV03_PFIFO_CACHES, caches & ~1);
-
- if (engine->fifo.channel_id(dev) != chan->id) {
- struct nouveau_gpuobj *ramfc =
- chan->ramfc ? chan->ramfc->gpuobj : NULL;
-
- if (!ramfc) {
- NV_ERROR(dev, "No RAMFC for channel %d\n", chan->id);
- return 1;
- }
-
- engine->instmem.prepare_access(dev, false);
- if (nv_ro32(dev, ramfc, 0) != nv_ro32(dev, ramfc, 1))
- idle = 0;
- else
- idle = 1;
- engine->instmem.finish_access(dev);
- } else {
- idle = (nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET) ==
- nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT));
- }
-
- nv_wr32(dev, NV03_PFIFO_CACHES, caches);
- return idle;
-}
-
/* stops a fifo */
void
nouveau_channel_free(struct nouveau_channel *chan)
init->subchan[0].grclass = 0x0039;
else
init->subchan[0].grclass = 0x5039;
- init->nr_subchan = 1;
+ init->subchan[1].handle = NvSw;
+ init->subchan[1].grclass = NV_SW;
+ init->nr_subchan = 2;
/* Named memory object area */
ret = drm_gem_handle_create(file_priv, chan->notifier_bo->gem,
*
*/
+#include <acpi/button.h>
+
#include "drmP.h"
#include "drm_edid.h"
#include "drm_crtc_helper.h"
+
#include "nouveau_reg.h"
#include "nouveau_drv.h"
#include "nouveau_encoder.h"
static void
nouveau_connector_destroy(struct drm_connector *drm_connector)
{
- struct nouveau_connector *connector = nouveau_connector(drm_connector);
- struct drm_device *dev = connector->base.dev;
+ struct nouveau_connector *nv_connector =
+ nouveau_connector(drm_connector);
+ struct drm_device *dev = nv_connector->base.dev;
NV_DEBUG_KMS(dev, "\n");
- if (!connector)
+ if (!nv_connector)
return;
+ kfree(nv_connector->edid);
drm_sysfs_connector_remove(drm_connector);
drm_connector_cleanup(drm_connector);
kfree(drm_connector);
if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
if (nv_encoder && nv_connector->native_mode) {
+#ifdef CONFIG_ACPI
+ if (!nouveau_ignorelid && !acpi_lid_open())
+ return connector_status_disconnected;
+#endif
nouveau_connector_set_encoder(connector, nv_encoder);
return connector_status_connected;
}
+ /* Cleanup the previous EDID block. */
+ if (nv_connector->edid) {
+ drm_mode_connector_update_edid_property(connector, NULL);
+ kfree(nv_connector->edid);
+ nv_connector->edid = NULL;
+ }
+
i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
if (i2c) {
nouveau_connector_ddc_prepare(connector, &flags);
if (!nv_connector->edid) {
NV_ERROR(dev, "DDC responded, but no EDID for %s\n",
drm_get_connector_name(connector));
- return connector_status_disconnected;
+ goto detect_analog;
}
if (nv_encoder->dcb->type == OUTPUT_DP &&
return connector_status_connected;
}
+detect_analog:
nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
if (!nv_encoder)
nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
*/
if (!nv_connector->edid && !nv_connector->native_mode &&
!dev_priv->VBIOS.pub.fp_no_ddc) {
- nv_connector->edid =
+ struct edid *edid =
(struct edid *)nouveau_bios_embedded_edid(dev);
+ if (edid) {
+ nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ *(nv_connector->edid) = *edid;
+ }
}
if (!nv_connector->edid)
#include "nouveau_drv.h"
#include "nouveau_dma.h"
+void
+nouveau_dma_pre_init(struct nouveau_channel *chan)
+{
+ chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2;
+ chan->dma.put = 0;
+ chan->dma.cur = chan->dma.put;
+ chan->dma.free = chan->dma.max - chan->dma.cur;
+}
+
int
nouveau_dma_init(struct nouveau_channel *chan)
{
struct drm_device *dev = chan->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_gpuobj *m2mf = NULL;
+ struct nouveau_gpuobj *nvsw = NULL;
int ret, i;
/* Create NV_MEMORY_TO_MEMORY_FORMAT for buffer moves */
if (ret)
return ret;
+ /* Create an NV_SW object for various sync purposes */
+ ret = nouveau_gpuobj_sw_new(chan, NV_SW, &nvsw);
+ if (ret)
+ return ret;
+
+ ret = nouveau_gpuobj_ref_add(dev, chan, NvSw, nvsw, NULL);
+ if (ret)
+ return ret;
+
/* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */
ret = nouveau_notifier_alloc(chan, NvNotify0, 32, &chan->m2mf_ntfy);
if (ret)
return ret;
}
- /* Initialise DMA vars */
- chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2;
- chan->dma.put = 0;
- chan->dma.cur = chan->dma.put;
- chan->dma.free = chan->dma.max - chan->dma.cur;
-
/* Insert NOPS for NOUVEAU_DMA_SKIPS */
ret = RING_SPACE(chan, NOUVEAU_DMA_SKIPS);
if (ret)
BEGIN_RING(chan, NvSubM2MF, NV_MEMORY_TO_MEMORY_FORMAT_DMA_NOTIFY, 1);
OUT_RING(chan, NvNotify0);
+ /* Initialise NV_SW */
+ ret = RING_SPACE(chan, 2);
+ if (ret)
+ return ret;
+ BEGIN_RING(chan, NvSubSw, 0, 1);
+ OUT_RING(chan, NvSw);
+
/* Sit back and pray the channel works.. */
FIRE_RING(chan);
chan->dma.cur += nr_dwords;
}
-static inline bool
-READ_GET(struct nouveau_channel *chan, uint32_t *get)
+/* Fetch and adjust GPU GET pointer
+ *
+ * Returns:
+ * value >= 0, the adjusted GET pointer
+ * -EINVAL if GET pointer currently outside main push buffer
+ * -EBUSY if timeout exceeded
+ */
+static inline int
+READ_GET(struct nouveau_channel *chan, uint32_t *prev_get, uint32_t *timeout)
{
uint32_t val;
val = nvchan_rd32(chan, chan->user_get);
- if (val < chan->pushbuf_base ||
- val >= chan->pushbuf_base + chan->pushbuf_bo->bo.mem.size) {
- /* meaningless to dma_wait() except to know whether the
- * GPU has stalled or not
- */
- *get = val;
- return false;
+
+ /* reset counter as long as GET is still advancing, this is
+ * to avoid misdetecting a GPU lockup if the GPU happens to
+ * just be processing an operation that takes a long time
+ */
+ if (val != *prev_get) {
+ *prev_get = val;
+ *timeout = 0;
+ }
+
+ if ((++*timeout & 0xff) == 0) {
+ DRM_UDELAY(1);
+ if (*timeout > 100000)
+ return -EBUSY;
}
- *get = (val - chan->pushbuf_base) >> 2;
- return true;
+ if (val < chan->pushbuf_base ||
+ val > chan->pushbuf_base + (chan->dma.max << 2))
+ return -EINVAL;
+
+ return (val - chan->pushbuf_base) >> 2;
}
int
nouveau_dma_wait(struct nouveau_channel *chan, int size)
{
- uint32_t get, prev_get = 0, cnt = 0;
- bool get_valid;
+ uint32_t prev_get = 0, cnt = 0;
+ int get;
while (chan->dma.free < size) {
- /* reset counter as long as GET is still advancing, this is
- * to avoid misdetecting a GPU lockup if the GPU happens to
- * just be processing an operation that takes a long time
- */
- get_valid = READ_GET(chan, &get);
- if (get != prev_get) {
- prev_get = get;
- cnt = 0;
- }
-
- if ((++cnt & 0xff) == 0) {
- DRM_UDELAY(1);
- if (cnt > 100000)
- return -EBUSY;
- }
+ get = READ_GET(chan, &prev_get, &cnt);
+ if (unlikely(get == -EBUSY))
+ return -EBUSY;
/* loop until we have a usable GET pointer. the value
* we read from the GPU may be outside the main ring if
* from the SKIPS area, so the code below doesn't have to deal
* with some fun corner cases.
*/
- if (!get_valid || get < NOUVEAU_DMA_SKIPS)
+ if (unlikely(get == -EINVAL) || get < NOUVEAU_DMA_SKIPS)
continue;
if (get <= chan->dma.cur) {
* after processing the currently pending commands.
*/
OUT_RING(chan, chan->pushbuf_base | 0x20000000);
+
+ /* wait for GET to depart from the skips area.
+ * prevents writing GET==PUT and causing a race
+ * condition that causes us to think the GPU is
+ * idle when it's not.
+ */
+ do {
+ get = READ_GET(chan, &prev_get, &cnt);
+ if (unlikely(get == -EBUSY))
+ return -EBUSY;
+ if (unlikely(get == -EINVAL))
+ continue;
+ } while (get <= NOUVEAU_DMA_SKIPS);
WRITE_PUT(NOUVEAU_DMA_SKIPS);
/* we're now submitting commands at the start of
/* Hardcoded object assignments to subchannels (subchannel id). */
enum {
NvSubM2MF = 0,
- NvSub2D = 1,
- NvSubCtxSurf2D = 1,
- NvSubGdiRect = 2,
- NvSubImageBlit = 3
+ NvSubSw = 1,
+ NvSub2D = 2,
+ NvSubCtxSurf2D = 2,
+ NvSubGdiRect = 3,
+ NvSubImageBlit = 4
};
/* Object handles. */
NvClipRect = 0x8000000b,
NvGdiRect = 0x8000000c,
NvImageBlit = 0x8000000d,
+ NvSw = 0x8000000e,
/* G80+ display objects */
NvEvoVRAM = 0x01000000,
if (!nv_wait(NV50_AUXCH_CTRL(index), 0x00010000, 0x00000000)) {
NV_ERROR(dev, "expected bit 16 == 0, got 0x%08x\n",
nv_rd32(dev, NV50_AUXCH_CTRL(index)));
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
udelay(400);
break;
}
+ if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
+ ret = -EREMOTEIO;
+ goto out;
+ }
+
if (cmd & 1) {
for (i = 0; i < 4; i++) {
data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i));
int nouveau_uscript_tmds = -1;
module_param_named(uscript_tmds, nouveau_uscript_tmds, int, 0400);
+MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status");
+int nouveau_ignorelid = 0;
+module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
+
MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
"\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n"
"\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n"
#define MAX_NUM_DCB_ENTRIES 16
#define NOUVEAU_MAX_CHANNEL_NR 128
+#define NOUVEAU_MAX_TILE_NR 15
#define NV50_VM_MAX_VRAM (2*1024*1024*1024ULL)
#define NV50_VM_BLOCK (512*1024*1024ULL)
#define NV50_VM_VRAM_NR (NV50_VM_MAX_VRAM / NV50_VM_BLOCK)
+struct nouveau_tile_reg {
+ struct nouveau_fence *fence;
+ uint32_t addr;
+ uint32_t size;
+ bool used;
+};
+
struct nouveau_bo {
struct ttm_buffer_object bo;
struct ttm_placement placement;
uint32_t tile_mode;
uint32_t tile_flags;
+ struct nouveau_tile_reg *tile;
struct drm_gem_object *gem;
struct drm_file *cpu_filp;
};
struct nouveau_fb_engine {
+ int num_tiles;
+
int (*init)(struct drm_device *dev);
void (*takedown)(struct drm_device *dev);
+
+ void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch);
};
struct nouveau_fifo_engine {
void (*disable)(struct drm_device *);
void (*enable)(struct drm_device *);
bool (*reassign)(struct drm_device *, bool enable);
+ bool (*cache_flush)(struct drm_device *dev);
+ bool (*cache_pull)(struct drm_device *dev, bool enable);
int (*channel_id)(struct drm_device *);
void (*destroy_context)(struct nouveau_channel *);
int (*load_context)(struct nouveau_channel *);
int (*unload_context)(struct drm_device *);
+
+ void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch);
};
struct nouveau_engine {
void __iomem *ramin;
uint32_t ramin_size;
+ struct nouveau_bo *vga_ram;
+
struct workqueue_struct *wq;
struct work_struct irq_work;
unsigned long sg_handle;
} gart_info;
+ /* nv10-nv40 tiling regions */
+ struct {
+ struct nouveau_tile_reg reg[NOUVEAU_MAX_TILE_NR];
+ spinlock_t lock;
+ } tile;
+
/* G8x/G9x virtual address space */
uint64_t vm_gart_base;
uint64_t vm_gart_size;
extern int nouveau_reg_debug;
extern char *nouveau_vbios;
extern int nouveau_ctxfw;
+extern int nouveau_ignorelid;
/* nouveau_state.c */
extern void nouveau_preclose(struct drm_device *dev, struct drm_file *);
extern int nouveau_mem_init(struct drm_device *);
extern int nouveau_mem_init_agp(struct drm_device *);
extern void nouveau_mem_close(struct drm_device *);
+extern struct nouveau_tile_reg *nv10_mem_set_tiling(struct drm_device *dev,
+ uint32_t addr,
+ uint32_t size,
+ uint32_t pitch);
+extern void nv10_mem_expire_tiling(struct drm_device *dev,
+ struct nouveau_tile_reg *tile,
+ struct nouveau_fence *fence);
extern int nv50_mem_vm_bind_linear(struct drm_device *, uint64_t virt,
uint32_t size, uint32_t flags,
uint64_t phys);
struct drm_file *file_priv,
uint32_t fb_ctxdma, uint32_t tt_ctxdma);
extern void nouveau_channel_free(struct nouveau_channel *);
-extern int nouveau_channel_idle(struct nouveau_channel *chan);
/* nouveau_object.c */
extern int nouveau_gpuobj_early_init(struct drm_device *);
uint32_t *o_ret);
extern int nouveau_gpuobj_gr_new(struct nouveau_channel *, int class,
struct nouveau_gpuobj **);
+extern int nouveau_gpuobj_sw_new(struct nouveau_channel *, int class,
+ struct nouveau_gpuobj **);
extern int nouveau_ioctl_grobj_alloc(struct drm_device *, void *data,
struct drm_file *);
extern int nouveau_ioctl_gpuobj_free(struct drm_device *, void *data,
#endif
/* nouveau_dma.c */
+extern void nouveau_dma_pre_init(struct nouveau_channel *);
extern int nouveau_dma_init(struct nouveau_channel *);
extern int nouveau_dma_wait(struct nouveau_channel *, int size);
/* nv10_fb.c */
extern int nv10_fb_init(struct drm_device *);
extern void nv10_fb_takedown(struct drm_device *);
+extern void nv10_fb_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv40_fb.c */
extern int nv40_fb_init(struct drm_device *);
extern void nv40_fb_takedown(struct drm_device *);
+extern void nv40_fb_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv04_fifo.c */
extern int nv04_fifo_init(struct drm_device *);
extern void nv04_fifo_disable(struct drm_device *);
extern void nv04_fifo_enable(struct drm_device *);
extern bool nv04_fifo_reassign(struct drm_device *, bool);
+extern bool nv04_fifo_cache_flush(struct drm_device *);
+extern bool nv04_fifo_cache_pull(struct drm_device *, bool);
extern int nv04_fifo_channel_id(struct drm_device *);
extern int nv04_fifo_create_context(struct nouveau_channel *);
extern void nv04_fifo_destroy_context(struct nouveau_channel *);
extern int nv10_graph_load_context(struct nouveau_channel *);
extern int nv10_graph_unload_context(struct drm_device *);
extern void nv10_graph_context_switch(struct drm_device *);
+extern void nv10_graph_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv20_graph.c */
extern struct nouveau_pgraph_object_class nv20_graph_grclass[];
extern int nv20_graph_init(struct drm_device *);
extern void nv20_graph_takedown(struct drm_device *);
extern int nv30_graph_init(struct drm_device *);
+extern void nv20_graph_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv40_graph.c */
extern struct nouveau_pgraph_object_class nv40_graph_grclass[];
extern int nv40_graph_load_context(struct nouveau_channel *);
extern int nv40_graph_unload_context(struct drm_device *);
extern void nv40_grctx_init(struct nouveau_grctx *);
+extern void nv40_graph_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv50_graph.c */
extern struct nouveau_pgraph_object_class nv50_graph_grclass[];
/* nv04_dac.c */
extern int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry);
-extern enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder,
- struct drm_connector *connector);
+extern uint32_t nv17_dac_sample_load(struct drm_encoder *encoder);
extern int nv04_dac_output_offset(struct drm_encoder *encoder);
extern void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable);
/* nv17_tv.c */
extern int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry);
-extern enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder,
- struct drm_connector *connector,
- uint32_t pin_mask);
/* nv04_display.c */
extern int nv04_display_create(struct drm_device *);
return false;
}
-#define NV50_NVSW 0x0000506e
-#define NV50_NVSW_DMA_SEMAPHORE 0x00000060
-#define NV50_NVSW_SEMAPHORE_OFFSET 0x00000064
-#define NV50_NVSW_SEMAPHORE_ACQUIRE 0x00000068
-#define NV50_NVSW_SEMAPHORE_RELEASE 0x0000006c
-#define NV50_NVSW_DMA_VBLSEM 0x0000018c
-#define NV50_NVSW_VBLSEM_OFFSET 0x00000400
-#define NV50_NVSW_VBLSEM_RELEASE_VALUE 0x00000404
-#define NV50_NVSW_VBLSEM_RELEASE 0x00000408
+#define NV_SW 0x0000506e
+#define NV_SW_DMA_SEMAPHORE 0x00000060
+#define NV_SW_SEMAPHORE_OFFSET 0x00000064
+#define NV_SW_SEMAPHORE_ACQUIRE 0x00000068
+#define NV_SW_SEMAPHORE_RELEASE 0x0000006c
+#define NV_SW_DMA_VBLSEM 0x0000018c
+#define NV_SW_VBLSEM_OFFSET 0x00000400
+#define NV_SW_VBLSEM_RELEASE_VALUE 0x00000404
+#define NV_SW_VBLSEM_RELEASE 0x00000408
#endif /* __NOUVEAU_DRV_H__ */
return 0;
if (RING_SPACE(chan, 4)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
return 0;
}
}
if (ret) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
return 0;
}
mode_cmd.bpp = surface_bpp;
mode_cmd.pitch = mode_cmd.width * (mode_cmd.bpp >> 3);
- mode_cmd.pitch = ALIGN(mode_cmd.pitch, 256);
+ mode_cmd.pitch = roundup(mode_cmd.pitch, 256);
mode_cmd.depth = surface_depth;
size = mode_cmd.pitch * mode_cmd.height;
- size = ALIGN(size, PAGE_SIZE);
+ size = roundup(size, PAGE_SIZE);
ret = nouveau_gem_new(dev, dev_priv->channel, size, 0, TTM_PL_FLAG_VRAM,
0, 0x0000, false, true, &nvbo);
return 0;
}
+
+void nouveau_fbcon_gpu_lockup(struct fb_info *info)
+{
+ struct nouveau_fbcon_par *par = info->par;
+ struct drm_device *dev = par->dev;
+
+ NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+}
int nv04_fbcon_accel_init(struct fb_info *info);
int nv50_fbcon_accel_init(struct fb_info *info);
+void nouveau_fbcon_gpu_lockup(struct fb_info *info);
#endif /* __NV50_FBCON_H__ */
list_add_tail(&fence->entry, &chan->fence.pending);
spin_unlock_irqrestore(&chan->fence.lock, flags);
- BEGIN_RING(chan, NvSubM2MF, USE_REFCNT ? 0x0050 : 0x0150, 1);
+ BEGIN_RING(chan, NvSubSw, USE_REFCNT ? 0x0050 : 0x0150, 1);
OUT_RING(chan, fence->sequence);
FIRE_RING(chan);
}
struct validate_op {
- struct nouveau_fence *fence;
struct list_head vram_list;
struct list_head gart_list;
struct list_head both_list;
}
static void
-validate_fini(struct validate_op *op, bool success)
+validate_fini(struct validate_op *op, struct nouveau_fence* fence)
{
- struct nouveau_fence *fence = op->fence;
-
- if (unlikely(!success))
- op->fence = NULL;
-
- validate_fini_list(&op->vram_list, op->fence);
- validate_fini_list(&op->gart_list, op->fence);
- validate_fini_list(&op->both_list, op->fence);
- nouveau_fence_unref((void *)&fence);
+ validate_fini_list(&op->vram_list, fence);
+ validate_fini_list(&op->gart_list, fence);
+ validate_fini_list(&op->both_list, fence);
}
static int
else {
NV_ERROR(dev, "invalid valid domains: 0x%08x\n",
b->valid_domains);
+ list_add_tail(&nvbo->entry, &op->both_list);
validate_fini(op, NULL);
return -EINVAL;
}
INIT_LIST_HEAD(&op->gart_list);
INIT_LIST_HEAD(&op->both_list);
- ret = nouveau_fence_new(chan, &op->fence, false);
- if (ret)
- return ret;
-
if (nr_buffers == 0)
return 0;
static int
nouveau_gem_pushbuf_reloc_apply(struct nouveau_channel *chan, int nr_bo,
struct drm_nouveau_gem_pushbuf_bo *bo,
- int nr_relocs, uint64_t ptr_relocs,
- int nr_dwords, int first_dword,
+ unsigned nr_relocs, uint64_t ptr_relocs,
+ unsigned nr_dwords, unsigned first_dword,
uint32_t *pushbuf, bool is_iomem)
{
struct drm_nouveau_gem_pushbuf_reloc *reloc = NULL;
struct drm_device *dev = chan->dev;
- int ret = 0, i;
+ int ret = 0;
+ unsigned i;
reloc = u_memcpya(ptr_relocs, nr_relocs, sizeof(*reloc));
if (IS_ERR(reloc))
struct drm_nouveau_gem_pushbuf_bo *bo = NULL;
struct nouveau_channel *chan;
struct validate_op op;
+ struct nouveau_fence* fence = 0;
uint32_t *pushbuf = NULL;
int ret = 0, do_reloc = 0, i;
OUT_RINGp(chan, pushbuf, req->nr_dwords);
- ret = nouveau_fence_emit(op.fence);
+ ret = nouveau_fence_new(chan, &fence, true);
if (ret) {
NV_ERROR(dev, "error fencing pushbuf: %d\n", ret);
WIND_RING(chan);
}
if (nouveau_gem_pushbuf_sync(chan)) {
- ret = nouveau_fence_wait(op.fence, NULL, false, false);
+ ret = nouveau_fence_wait(fence, NULL, false, false);
if (ret) {
for (i = 0; i < req->nr_dwords; i++)
NV_ERROR(dev, "0x%08x\n", pushbuf[i]);
}
out:
- validate_fini(&op, ret == 0);
+ validate_fini(&op, fence);
+ nouveau_fence_unref((void**)&fence);
mutex_unlock(&dev->struct_mutex);
kfree(pushbuf);
kfree(bo);
struct drm_gem_object *gem;
struct nouveau_bo *pbbo;
struct validate_op op;
+ struct nouveau_fence* fence = 0;
int i, ret = 0, do_reloc = 0;
NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
}
pbbo = nouveau_gem_object(gem);
+ if ((req->offset & 3) || req->nr_dwords < 2 ||
+ (unsigned long)req->offset > (unsigned long)pbbo->bo.mem.size ||
+ (unsigned long)req->nr_dwords >
+ ((unsigned long)(pbbo->bo.mem.size - req->offset ) >> 2)) {
+ NV_ERROR(dev, "pb call misaligned or out of bounds: "
+ "%d + %d * 4 > %ld\n",
+ req->offset, req->nr_dwords, pbbo->bo.mem.size);
+ ret = -EINVAL;
+ drm_gem_object_unreference(gem);
+ goto out;
+ }
+
ret = ttm_bo_reserve(&pbbo->bo, false, false, true,
chan->fence.sequence);
if (ret) {
OUT_RING(chan, 0);
}
- ret = nouveau_fence_emit(op.fence);
+ ret = nouveau_fence_new(chan, &fence, true);
if (ret) {
NV_ERROR(dev, "error fencing pushbuf: %d\n", ret);
WIND_RING(chan);
}
out:
- validate_fini(&op, ret == 0);
+ validate_fini(&op, fence);
+ nouveau_fence_unref((void**)&fence);
mutex_unlock(&dev->struct_mutex);
kfree(bo);
if (nsource & NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD) {
if (nouveau_pgraph_intr_swmthd(dev, &trap))
unhandled = 1;
+ } else if (nsource & NV03_PGRAPH_NSOURCE_DMA_VTX_PROTECTION) {
+ uint32_t v = nv_rd32(dev, 0x402000);
+ nv_wr32(dev, 0x402000, v);
+
+ /* dump the error anyway for now: it's useful for
+ Gallium development */
+ unhandled = 1;
} else {
unhandled = 1;
}
if ((nv_rd32(dev, 0x400500) & isb) != isb)
nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb);
+ nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
}
nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING);
}
}
+/*
+ * NV10-NV40 tiling helpers
+ */
+
+static void
+nv10_mem_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
+ struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i];
+
+ tile->addr = addr;
+ tile->size = size;
+ tile->used = !!pitch;
+ nouveau_fence_unref((void **)&tile->fence);
+
+ if (!pfifo->cache_flush(dev))
+ return;
+
+ pfifo->reassign(dev, false);
+ pfifo->cache_flush(dev);
+ pfifo->cache_pull(dev, false);
+
+ nouveau_wait_for_idle(dev);
+
+ pgraph->set_region_tiling(dev, i, addr, size, pitch);
+ pfb->set_region_tiling(dev, i, addr, size, pitch);
+
+ pfifo->cache_pull(dev, true);
+ pfifo->reassign(dev, true);
+}
+
+struct nouveau_tile_reg *
+nv10_mem_set_tiling(struct drm_device *dev, uint32_t addr, uint32_t size,
+ uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ struct nouveau_tile_reg *tile = dev_priv->tile.reg, *found = NULL;
+ int i;
+
+ spin_lock(&dev_priv->tile.lock);
+
+ for (i = 0; i < pfb->num_tiles; i++) {
+ if (tile[i].used)
+ /* Tile region in use. */
+ continue;
+
+ if (tile[i].fence &&
+ !nouveau_fence_signalled(tile[i].fence, NULL))
+ /* Pending tile region. */
+ continue;
+
+ if (max(tile[i].addr, addr) <
+ min(tile[i].addr + tile[i].size, addr + size))
+ /* Kill an intersecting tile region. */
+ nv10_mem_set_region_tiling(dev, i, 0, 0, 0);
+
+ if (pitch && !found) {
+ /* Free tile region. */
+ nv10_mem_set_region_tiling(dev, i, addr, size, pitch);
+ found = &tile[i];
+ }
+ }
+
+ spin_unlock(&dev_priv->tile.lock);
+
+ return found;
+}
+
+void
+nv10_mem_expire_tiling(struct drm_device *dev, struct nouveau_tile_reg *tile,
+ struct nouveau_fence *fence)
+{
+ if (fence) {
+ /* Mark it as pending. */
+ tile->fence = fence;
+ nouveau_fence_ref(fence);
+ }
+
+ tile->used = false;
+}
+
/*
* NV50 VM helpers
*/
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- if (dev_priv->ttm.bdev.man[TTM_PL_PRIV0].has_type)
- ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_PRIV0);
- ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
+ nouveau_bo_unpin(dev_priv->vga_ram);
+ nouveau_bo_ref(NULL, &dev_priv->vga_ram);
ttm_bo_device_release(&dev_priv->ttm.bdev);
INIT_LIST_HEAD(&dev_priv->ttm.bo_list);
spin_lock_init(&dev_priv->ttm.bo_list_lock);
+ spin_lock_init(&dev_priv->tile.lock);
dev_priv->fb_available_size = nouveau_mem_fb_amount(dev);
return ret;
}
+ ret = nouveau_bo_new(dev, NULL, 256*1024, 0, TTM_PL_FLAG_VRAM,
+ 0, 0, true, true, &dev_priv->vga_ram);
+ if (ret == 0)
+ ret = nouveau_bo_pin(dev_priv->vga_ram, TTM_PL_FLAG_VRAM);
+ if (ret) {
+ NV_WARN(dev, "failed to reserve VGA memory\n");
+ nouveau_bo_ref(NULL, &dev_priv->vga_ram);
+ }
+
/* GART */
#if !defined(__powerpc__) && !defined(__ia64__)
if (drm_device_is_agp(dev) && dev->agp) {
dev_priv->fb_mtrr = drm_mtrr_add(drm_get_resource_start(dev, 1),
drm_get_resource_len(dev, 1),
DRM_MTRR_WC);
+
return 0;
}
return 0;
}
-static int
+int
nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class,
struct nouveau_gpuobj **gpuobj_ret)
{
#define NV04_PGRAPH_BLEND 0x00400824
#define NV04_PGRAPH_STORED_FMT 0x00400830
#define NV04_PGRAPH_PATT_COLORRAM 0x00400900
-#define NV40_PGRAPH_TILE0(i) (0x00400900 + (i*16))
-#define NV40_PGRAPH_TLIMIT0(i) (0x00400904 + (i*16))
-#define NV40_PGRAPH_TSIZE0(i) (0x00400908 + (i*16))
-#define NV40_PGRAPH_TSTATUS0(i) (0x0040090C + (i*16))
+#define NV20_PGRAPH_TILE(i) (0x00400900 + (i*16))
+#define NV20_PGRAPH_TLIMIT(i) (0x00400904 + (i*16))
+#define NV20_PGRAPH_TSIZE(i) (0x00400908 + (i*16))
+#define NV20_PGRAPH_TSTATUS(i) (0x0040090C + (i*16))
#define NV10_PGRAPH_TILE(i) (0x00400B00 + (i*16))
#define NV10_PGRAPH_TLIMIT(i) (0x00400B04 + (i*16))
#define NV10_PGRAPH_TSIZE(i) (0x00400B08 + (i*16))
#define NV10_PGRAPH_TSTATUS(i) (0x00400B0C + (i*16))
#define NV04_PGRAPH_U_RAM 0x00400D00
-#define NV47_PGRAPH_TILE0(i) (0x00400D00 + (i*16))
-#define NV47_PGRAPH_TLIMIT0(i) (0x00400D04 + (i*16))
-#define NV47_PGRAPH_TSIZE0(i) (0x00400D08 + (i*16))
-#define NV47_PGRAPH_TSTATUS0(i) (0x00400D0C + (i*16))
+#define NV47_PGRAPH_TILE(i) (0x00400D00 + (i*16))
+#define NV47_PGRAPH_TLIMIT(i) (0x00400D04 + (i*16))
+#define NV47_PGRAPH_TSIZE(i) (0x00400D08 + (i*16))
+#define NV47_PGRAPH_TSTATUS(i) (0x00400D0C + (i*16))
#define NV04_PGRAPH_V_RAM 0x00400D40
#define NV04_PGRAPH_W_RAM 0x00400D80
#define NV10_PGRAPH_COMBINER0_IN_ALPHA 0x00400E40
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv04_fifo_channel_id;
engine->fifo.create_context = nv04_fifo_create_context;
engine->fifo.destroy_context = nv04_fifo_destroy_context;
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv10_fb_init;
engine->fb.takedown = nv10_fb_takedown;
+ engine->fb.set_region_tiling = nv10_fb_set_region_tiling;
engine->graph.grclass = nv10_graph_grclass;
engine->graph.init = nv10_graph_init;
engine->graph.takedown = nv10_graph_takedown;
engine->graph.fifo_access = nv04_graph_fifo_access;
engine->graph.load_context = nv10_graph_load_context;
engine->graph.unload_context = nv10_graph_unload_context;
+ engine->graph.set_region_tiling = nv10_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv10_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv10_fifo_create_context;
engine->fifo.destroy_context = nv10_fifo_destroy_context;
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv10_fb_init;
engine->fb.takedown = nv10_fb_takedown;
+ engine->fb.set_region_tiling = nv10_fb_set_region_tiling;
engine->graph.grclass = nv20_graph_grclass;
engine->graph.init = nv20_graph_init;
engine->graph.takedown = nv20_graph_takedown;
engine->graph.fifo_access = nv04_graph_fifo_access;
engine->graph.load_context = nv20_graph_load_context;
engine->graph.unload_context = nv20_graph_unload_context;
+ engine->graph.set_region_tiling = nv20_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv10_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv10_fifo_create_context;
engine->fifo.destroy_context = nv10_fifo_destroy_context;
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv10_fb_init;
engine->fb.takedown = nv10_fb_takedown;
+ engine->fb.set_region_tiling = nv10_fb_set_region_tiling;
engine->graph.grclass = nv30_graph_grclass;
engine->graph.init = nv30_graph_init;
engine->graph.takedown = nv20_graph_takedown;
engine->graph.destroy_context = nv20_graph_destroy_context;
engine->graph.load_context = nv20_graph_load_context;
engine->graph.unload_context = nv20_graph_unload_context;
+ engine->graph.set_region_tiling = nv20_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv10_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv10_fifo_create_context;
engine->fifo.destroy_context = nv10_fifo_destroy_context;
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv40_fb_init;
engine->fb.takedown = nv40_fb_takedown;
+ engine->fb.set_region_tiling = nv40_fb_set_region_tiling;
engine->graph.grclass = nv40_graph_grclass;
engine->graph.init = nv40_graph_init;
engine->graph.takedown = nv40_graph_takedown;
engine->graph.destroy_context = nv40_graph_destroy_context;
engine->graph.load_context = nv40_graph_load_context;
engine->graph.unload_context = nv40_graph_unload_context;
+ engine->graph.set_region_tiling = nv40_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv40_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv40_fifo_create_context;
engine->fifo.destroy_context = nv40_fifo_destroy_context;
engine->mc.takedown(dev);
mutex_lock(&dev->struct_mutex);
+ ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
mutex_unlock(&dev->struct_mutex);
nouveau_sgdma_takedown(dev);
dev_priv->chipset = (reg0 & 0xff00000) >> 20;
/* NV04 or NV05 */
} else if ((reg0 & 0xff00fff0) == 0x20004000) {
- dev_priv->chipset = 0x04;
+ if (reg0 & 0x00f00000)
+ dev_priv->chipset = 0x05;
+ else
+ dev_priv->chipset = 0x04;
} else
dev_priv->chipset = 0xff;
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- /* In the case of an error dev_priv may not be be allocated yet */
- if (dev_priv && dev_priv->card_type)
+ /* In the case of an error dev_priv may not be allocated yet */
+ if (dev_priv)
nouveau_card_takedown(dev);
}
#include "nouveau_drv.h"
-static struct vm_operations_struct nouveau_ttm_vm_ops;
-static const struct vm_operations_struct *ttm_vm_ops;
-
-static int
-nouveau_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
-{
- struct ttm_buffer_object *bo = vma->vm_private_data;
- int ret;
-
- if (unlikely(bo == NULL))
- return VM_FAULT_NOPAGE;
-
- ret = ttm_vm_ops->fault(vma, vmf);
- return ret;
-}
-
int
nouveau_ttm_mmap(struct file *filp, struct vm_area_struct *vma)
{
struct drm_file *file_priv = filp->private_data;
struct drm_nouveau_private *dev_priv =
file_priv->minor->dev->dev_private;
- int ret;
if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
return drm_mmap(filp, vma);
- ret = ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev);
- if (unlikely(ret != 0))
- return ret;
-
- if (unlikely(ttm_vm_ops == NULL)) {
- ttm_vm_ops = vma->vm_ops;
- nouveau_ttm_vm_ops = *ttm_vm_ops;
- nouveau_ttm_vm_ops.fault = &nouveau_ttm_fault;
- }
-
- vma->vm_ops = &nouveau_ttm_vm_ops;
- return 0;
+ return ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev);
}
static int
return connector_status_disconnected;
}
-enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder,
- struct drm_connector *connector)
+uint32_t nv17_dac_sample_load(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
- uint32_t testval, regoffset = nv04_dac_output_offset(encoder);
+ uint32_t sample, testval, regoffset = nv04_dac_output_offset(encoder);
uint32_t saved_powerctrl_2 = 0, saved_powerctrl_4 = 0, saved_routput,
saved_rtest_ctrl, saved_gpio0, saved_gpio1, temp, routput;
- int head, present = 0;
+ int head;
#define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20)
if (dcb->type == OUTPUT_TV) {
temp | NV_PRAMDAC_TEST_CONTROL_TP_INS_EN_ASSERTED);
msleep(5);
- temp = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset);
-
- if (dcb->type == OUTPUT_TV)
- present = (nv17_tv_detect(encoder, connector, temp)
- == connector_status_connected);
- else
- present = temp & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI;
+ sample = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset);
temp = NVReadRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL);
NVWriteRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL,
nv17_gpio_set(dev, DCB_GPIO_TVDAC1, saved_gpio1);
nv17_gpio_set(dev, DCB_GPIO_TVDAC0, saved_gpio0);
- if (present) {
- NV_INFO(dev, "Load detected on output %c\n", '@' + ffs(dcb->or));
+ return sample;
+}
+
+static enum drm_connector_status
+nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
+ uint32_t sample = nv17_dac_sample_load(encoder);
+
+ if (sample & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
+ NV_INFO(dev, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
return connector_status_connected;
+ } else {
+ return connector_status_disconnected;
}
-
- return connector_status_disconnected;
}
-
static bool nv04_dac_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
return;
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 4)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
struct drm_device *dev = par->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *chan = dev_priv->channel;
- uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color];
if (info->state != FBINFO_STATE_RUNNING)
return;
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 7)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
BEGIN_RING(chan, NvSubGdiRect, 0x02fc, 1);
OUT_RING(chan, (rect->rop != ROP_COPY) ? 1 : 3);
BEGIN_RING(chan, NvSubGdiRect, 0x03fc, 1);
- OUT_RING(chan, color);
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+ OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]);
+ else
+ OUT_RING(chan, rect->color);
BEGIN_RING(chan, NvSubGdiRect, 0x0400, 2);
OUT_RING(chan, (rect->dx << 16) | rect->dy);
OUT_RING(chan, (rect->width << 16) | rect->height);
}
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 8)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
int iter_len = dsize > 128 ? 128 : dsize;
if (RING_SPACE(chan, iter_len + 1)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
cfb_imageblit(info, image);
return;
}
struct drm_device *dev = par->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *chan = dev_priv->channel;
+ const int sub = NvSubCtxSurf2D;
int surface_fmt, pattern_fmt, rect_fmt;
int ret;
return ret;
if (RING_SPACE(chan, 49)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
return 0;
}
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvCtxSurf2D);
- BEGIN_RING(chan, 1, 0x0184, 2);
+ BEGIN_RING(chan, sub, 0x0184, 2);
OUT_RING(chan, NvDmaFB);
OUT_RING(chan, NvDmaFB);
- BEGIN_RING(chan, 1, 0x0300, 4);
+ BEGIN_RING(chan, sub, 0x0300, 4);
OUT_RING(chan, surface_fmt);
OUT_RING(chan, info->fix.line_length | (info->fix.line_length << 16));
OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base);
OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base);
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvRop);
- BEGIN_RING(chan, 1, 0x0300, 1);
+ BEGIN_RING(chan, sub, 0x0300, 1);
OUT_RING(chan, 0x55);
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvImagePatt);
- BEGIN_RING(chan, 1, 0x0300, 8);
+ BEGIN_RING(chan, sub, 0x0300, 8);
OUT_RING(chan, pattern_fmt);
#ifdef __BIG_ENDIAN
OUT_RING(chan, 2);
OUT_RING(chan, ~0);
OUT_RING(chan, ~0);
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvClipRect);
- BEGIN_RING(chan, 1, 0x0300, 2);
+ BEGIN_RING(chan, sub, 0x0300, 2);
OUT_RING(chan, 0);
OUT_RING(chan, (info->var.yres_virtual << 16) | info->var.xres_virtual);
return (reassign == 1);
}
+bool
+nv04_fifo_cache_flush(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+ uint64_t start = ptimer->read(dev);
+
+ do {
+ if (nv_rd32(dev, NV03_PFIFO_CACHE1_GET) ==
+ nv_rd32(dev, NV03_PFIFO_CACHE1_PUT))
+ return true;
+
+ } while (ptimer->read(dev) - start < 100000000);
+
+ NV_ERROR(dev, "Timeout flushing the PFIFO cache.\n");
+
+ return false;
+}
+
+bool
+nv04_fifo_cache_pull(struct drm_device *dev, bool enable)
+{
+ uint32_t pull = nv_rd32(dev, NV04_PFIFO_CACHE1_PULL0);
+
+ if (enable) {
+ nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull | 1);
+ } else {
+ nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull & ~1);
+ nv_wr32(dev, NV04_PFIFO_CACHE1_HASH, 0);
+ }
+
+ return !!(pull & 1);
+}
+
int
nv04_fifo_channel_id(struct drm_device *dev)
{
#include "nouveau_drv.h"
static uint32_t nv04_graph_ctx_regs[] = {
+ 0x0040053c,
+ 0x00400544,
+ 0x00400540,
+ 0x00400548,
NV04_PGRAPH_CTX_SWITCH1,
NV04_PGRAPH_CTX_SWITCH2,
NV04_PGRAPH_CTX_SWITCH3,
NV04_PGRAPH_PATT_COLOR0,
NV04_PGRAPH_PATT_COLOR1,
NV04_PGRAPH_PATT_COLORRAM+0x00,
- NV04_PGRAPH_PATT_COLORRAM+0x01,
- NV04_PGRAPH_PATT_COLORRAM+0x02,
- NV04_PGRAPH_PATT_COLORRAM+0x03,
NV04_PGRAPH_PATT_COLORRAM+0x04,
- NV04_PGRAPH_PATT_COLORRAM+0x05,
- NV04_PGRAPH_PATT_COLORRAM+0x06,
- NV04_PGRAPH_PATT_COLORRAM+0x07,
NV04_PGRAPH_PATT_COLORRAM+0x08,
- NV04_PGRAPH_PATT_COLORRAM+0x09,
- NV04_PGRAPH_PATT_COLORRAM+0x0A,
- NV04_PGRAPH_PATT_COLORRAM+0x0B,
- NV04_PGRAPH_PATT_COLORRAM+0x0C,
- NV04_PGRAPH_PATT_COLORRAM+0x0D,
- NV04_PGRAPH_PATT_COLORRAM+0x0E,
- NV04_PGRAPH_PATT_COLORRAM+0x0F,
+ NV04_PGRAPH_PATT_COLORRAM+0x0c,
NV04_PGRAPH_PATT_COLORRAM+0x10,
- NV04_PGRAPH_PATT_COLORRAM+0x11,
- NV04_PGRAPH_PATT_COLORRAM+0x12,
- NV04_PGRAPH_PATT_COLORRAM+0x13,
NV04_PGRAPH_PATT_COLORRAM+0x14,
- NV04_PGRAPH_PATT_COLORRAM+0x15,
- NV04_PGRAPH_PATT_COLORRAM+0x16,
- NV04_PGRAPH_PATT_COLORRAM+0x17,
NV04_PGRAPH_PATT_COLORRAM+0x18,
- NV04_PGRAPH_PATT_COLORRAM+0x19,
- NV04_PGRAPH_PATT_COLORRAM+0x1A,
- NV04_PGRAPH_PATT_COLORRAM+0x1B,
- NV04_PGRAPH_PATT_COLORRAM+0x1C,
- NV04_PGRAPH_PATT_COLORRAM+0x1D,
- NV04_PGRAPH_PATT_COLORRAM+0x1E,
- NV04_PGRAPH_PATT_COLORRAM+0x1F,
+ NV04_PGRAPH_PATT_COLORRAM+0x1c,
NV04_PGRAPH_PATT_COLORRAM+0x20,
- NV04_PGRAPH_PATT_COLORRAM+0x21,
- NV04_PGRAPH_PATT_COLORRAM+0x22,
- NV04_PGRAPH_PATT_COLORRAM+0x23,
NV04_PGRAPH_PATT_COLORRAM+0x24,
- NV04_PGRAPH_PATT_COLORRAM+0x25,
- NV04_PGRAPH_PATT_COLORRAM+0x26,
- NV04_PGRAPH_PATT_COLORRAM+0x27,
NV04_PGRAPH_PATT_COLORRAM+0x28,
- NV04_PGRAPH_PATT_COLORRAM+0x29,
- NV04_PGRAPH_PATT_COLORRAM+0x2A,
- NV04_PGRAPH_PATT_COLORRAM+0x2B,
- NV04_PGRAPH_PATT_COLORRAM+0x2C,
- NV04_PGRAPH_PATT_COLORRAM+0x2D,
- NV04_PGRAPH_PATT_COLORRAM+0x2E,
- NV04_PGRAPH_PATT_COLORRAM+0x2F,
+ NV04_PGRAPH_PATT_COLORRAM+0x2c,
NV04_PGRAPH_PATT_COLORRAM+0x30,
- NV04_PGRAPH_PATT_COLORRAM+0x31,
- NV04_PGRAPH_PATT_COLORRAM+0x32,
- NV04_PGRAPH_PATT_COLORRAM+0x33,
NV04_PGRAPH_PATT_COLORRAM+0x34,
- NV04_PGRAPH_PATT_COLORRAM+0x35,
- NV04_PGRAPH_PATT_COLORRAM+0x36,
- NV04_PGRAPH_PATT_COLORRAM+0x37,
NV04_PGRAPH_PATT_COLORRAM+0x38,
- NV04_PGRAPH_PATT_COLORRAM+0x39,
- NV04_PGRAPH_PATT_COLORRAM+0x3A,
- NV04_PGRAPH_PATT_COLORRAM+0x3B,
- NV04_PGRAPH_PATT_COLORRAM+0x3C,
- NV04_PGRAPH_PATT_COLORRAM+0x3D,
- NV04_PGRAPH_PATT_COLORRAM+0x3E,
- NV04_PGRAPH_PATT_COLORRAM+0x3F,
+ NV04_PGRAPH_PATT_COLORRAM+0x3c,
+ NV04_PGRAPH_PATT_COLORRAM+0x40,
+ NV04_PGRAPH_PATT_COLORRAM+0x44,
+ NV04_PGRAPH_PATT_COLORRAM+0x48,
+ NV04_PGRAPH_PATT_COLORRAM+0x4c,
+ NV04_PGRAPH_PATT_COLORRAM+0x50,
+ NV04_PGRAPH_PATT_COLORRAM+0x54,
+ NV04_PGRAPH_PATT_COLORRAM+0x58,
+ NV04_PGRAPH_PATT_COLORRAM+0x5c,
+ NV04_PGRAPH_PATT_COLORRAM+0x60,
+ NV04_PGRAPH_PATT_COLORRAM+0x64,
+ NV04_PGRAPH_PATT_COLORRAM+0x68,
+ NV04_PGRAPH_PATT_COLORRAM+0x6c,
+ NV04_PGRAPH_PATT_COLORRAM+0x70,
+ NV04_PGRAPH_PATT_COLORRAM+0x74,
+ NV04_PGRAPH_PATT_COLORRAM+0x78,
+ NV04_PGRAPH_PATT_COLORRAM+0x7c,
+ NV04_PGRAPH_PATT_COLORRAM+0x80,
+ NV04_PGRAPH_PATT_COLORRAM+0x84,
+ NV04_PGRAPH_PATT_COLORRAM+0x88,
+ NV04_PGRAPH_PATT_COLORRAM+0x8c,
+ NV04_PGRAPH_PATT_COLORRAM+0x90,
+ NV04_PGRAPH_PATT_COLORRAM+0x94,
+ NV04_PGRAPH_PATT_COLORRAM+0x98,
+ NV04_PGRAPH_PATT_COLORRAM+0x9c,
+ NV04_PGRAPH_PATT_COLORRAM+0xa0,
+ NV04_PGRAPH_PATT_COLORRAM+0xa4,
+ NV04_PGRAPH_PATT_COLORRAM+0xa8,
+ NV04_PGRAPH_PATT_COLORRAM+0xac,
+ NV04_PGRAPH_PATT_COLORRAM+0xb0,
+ NV04_PGRAPH_PATT_COLORRAM+0xb4,
+ NV04_PGRAPH_PATT_COLORRAM+0xb8,
+ NV04_PGRAPH_PATT_COLORRAM+0xbc,
+ NV04_PGRAPH_PATT_COLORRAM+0xc0,
+ NV04_PGRAPH_PATT_COLORRAM+0xc4,
+ NV04_PGRAPH_PATT_COLORRAM+0xc8,
+ NV04_PGRAPH_PATT_COLORRAM+0xcc,
+ NV04_PGRAPH_PATT_COLORRAM+0xd0,
+ NV04_PGRAPH_PATT_COLORRAM+0xd4,
+ NV04_PGRAPH_PATT_COLORRAM+0xd8,
+ NV04_PGRAPH_PATT_COLORRAM+0xdc,
+ NV04_PGRAPH_PATT_COLORRAM+0xe0,
+ NV04_PGRAPH_PATT_COLORRAM+0xe4,
+ NV04_PGRAPH_PATT_COLORRAM+0xe8,
+ NV04_PGRAPH_PATT_COLORRAM+0xec,
+ NV04_PGRAPH_PATT_COLORRAM+0xf0,
+ NV04_PGRAPH_PATT_COLORRAM+0xf4,
+ NV04_PGRAPH_PATT_COLORRAM+0xf8,
+ NV04_PGRAPH_PATT_COLORRAM+0xfc,
NV04_PGRAPH_PATTERN,
0x0040080c,
NV04_PGRAPH_PATTERN_SHAPE,
0x004004f8,
0x0040047c,
0x004004fc,
- 0x0040053c,
- 0x00400544,
- 0x00400540,
- 0x00400548,
- 0x00400560,
- 0x00400568,
- 0x00400564,
- 0x0040056c,
0x00400534,
0x00400538,
0x00400514,
0x00400500,
0x00400504,
NV04_PGRAPH_VALID1,
- NV04_PGRAPH_VALID2
-
-
+ NV04_PGRAPH_VALID2,
+ NV04_PGRAPH_DEBUG_3
};
struct graph_state {
pgraph->fifo_access(dev, true);
}
+static uint32_t *ctx_reg(struct graph_state *ctx, uint32_t reg)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(nv04_graph_ctx_regs); i++) {
+ if (nv04_graph_ctx_regs[i] == reg)
+ return &ctx->nv04[i];
+ }
+
+ return NULL;
+}
+
int nv04_graph_create_context(struct nouveau_channel *chan)
{
struct graph_state *pgraph_ctx;
if (pgraph_ctx == NULL)
return -ENOMEM;
- /* dev_priv->fifos[channel].pgraph_ctx_user = channel << 24; */
- pgraph_ctx->nv04[0] = 0x0001ffff;
- /* is it really needed ??? */
-#if 0
- dev_priv->fifos[channel].pgraph_ctx[1] =
- nv_rd32(dev, NV_PGRAPH_DEBUG_4);
- dev_priv->fifos[channel].pgraph_ctx[2] =
- nv_rd32(dev, 0x004006b0);
-#endif
+ *ctx_reg(pgraph_ctx, NV04_PGRAPH_DEBUG_3) = 0xfad4ff31;
+
return 0;
}
nv_wr32(dev, nv04_graph_ctx_regs[i], pgraph_ctx->nv04[i]);
nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL, 0x10010100);
- nv_wr32(dev, NV04_PGRAPH_CTX_USER, chan->id << 24);
+
+ tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff;
+ nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp | chan->id << 24);
+
tmp = nv_rd32(dev, NV04_PGRAPH_FFINTFC_ST2);
nv_wr32(dev, NV04_PGRAPH_FFINTFC_ST2, tmp & 0x000fffff);
+
return 0;
}
nv_wr32(dev, NV04_PGRAPH_STATE , 0xFFFFFFFF);
nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL , 0x10000100);
tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff;
- tmp |= dev_priv->engine.fifo.channels << 24;
+ tmp |= (dev_priv->engine.fifo.channels - 1) << 24;
nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp);
/* These don't belong here, they're part of a per-channel context */
int mthd, uint32_t data)
{
struct drm_device *dev = chan->dev;
- uint32_t instance = nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff;
+ uint32_t instance = (nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff) << 4;
int subc = (nv_rd32(dev, NV04_PGRAPH_TRAPPED_ADDR) >> 13) & 0x7;
uint32_t tmp;
return 0;
}
-static struct nouveau_pgraph_object_method nv04_graph_mthds_m2mf[] = {
+static struct nouveau_pgraph_object_method nv04_graph_mthds_sw[] = {
{ 0x0150, nv04_graph_mthd_set_ref },
{}
};
};
struct nouveau_pgraph_object_class nv04_graph_grclass[] = {
- { 0x0039, false, nv04_graph_mthds_m2mf },
+ { 0x0039, false, NULL },
{ 0x004a, false, nv04_graph_mthds_set_operation }, /* gdirect */
{ 0x005f, false, nv04_graph_mthds_set_operation }, /* imageblit */
{ 0x0061, false, nv04_graph_mthds_set_operation }, /* ifc */
{ 0x0053, false, NULL }, /* surf3d */
{ 0x0054, false, NULL }, /* tex_tri */
{ 0x0055, false, NULL }, /* multitex_tri */
+ { 0x506e, true, nv04_graph_mthds_sw },
{}
};
* of vram. For now, only reserve a small piece until we know
* more about what each chipset requires.
*/
- switch (dev_priv->chipset & 0xf0) {
+ switch (dev_priv->chipset) {
case 0x40:
case 0x47:
case 0x49:
#include "nouveau_drv.h"
#include "nouveau_drm.h"
+void
+nv10_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch) {
+ if (dev_priv->card_type >= NV_20)
+ addr |= 1;
+ else
+ addr |= 1 << 31;
+ }
+
+ nv_wr32(dev, NV10_PFB_TLIMIT(i), limit);
+ nv_wr32(dev, NV10_PFB_TSIZE(i), pitch);
+ nv_wr32(dev, NV10_PFB_TILE(i), addr);
+}
+
int
nv10_fb_init(struct drm_device *dev)
{
- uint32_t fb_bar_size;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
int i;
- fb_bar_size = drm_get_resource_len(dev, 0) - 1;
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, NV10_PFB_TILE(i), 0);
- nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size);
- }
+ pfb->num_tiles = NV10_PFB_TILE__SIZE;
+
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < pfb->num_tiles; i++)
+ pfb->set_region_tiling(dev, i, 0, 0, 0);
return 0;
}
chan->pgraph_ctx = NULL;
}
+void
+nv10_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1 << 31;
+
+ nv_wr32(dev, NV10_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV10_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV10_PGRAPH_TILE(i), addr);
+}
+
int nv10_graph_init(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
} else
nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000);
- /* copy tile info from PFB */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, NV10_PGRAPH_TILE(i),
- nv_rd32(dev, NV10_PFB_TILE(i)));
- nv_wr32(dev, NV10_PGRAPH_TLIMIT(i),
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- nv_wr32(dev, NV10_PGRAPH_TSIZE(i),
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- nv_wr32(dev, NV10_PGRAPH_TSTATUS(i),
- nv_rd32(dev, NV10_PFB_TSTATUS(i)));
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
+ nv10_graph_set_region_tiling(dev, i, 0, 0, 0);
nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH1, 0x00000000);
nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH2, 0x00000000);
#include "nouveau_hw.h"
#include "nv17_tv.h"
-enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder,
- struct drm_connector *connector,
- uint32_t pin_mask)
+static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t testval, regoffset = nv04_dac_output_offset(encoder);
+ uint32_t gpio0, gpio1, fp_htotal, fp_hsync_start, fp_hsync_end,
+ fp_control, test_ctrl, dacclk, ctv_14, ctv_1c, ctv_6c;
+ uint32_t sample = 0;
+ int head;
+
+#define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20)
+ testval = RGB_TEST_DATA(0x82, 0xeb, 0x82);
+ if (dev_priv->vbios->tvdactestval)
+ testval = dev_priv->vbios->tvdactestval;
+
+ dacclk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset);
+ head = (dacclk & 0x100) >> 8;
+
+ /* Save the previous state. */
+ gpio1 = nv17_gpio_get(dev, DCB_GPIO_TVDAC1);
+ gpio0 = nv17_gpio_get(dev, DCB_GPIO_TVDAC0);
+ fp_htotal = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL);
+ fp_hsync_start = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START);
+ fp_hsync_end = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END);
+ fp_control = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
+ test_ctrl = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset);
+ ctv_1c = NVReadRAMDAC(dev, head, 0x680c1c);
+ ctv_14 = NVReadRAMDAC(dev, head, 0x680c14);
+ ctv_6c = NVReadRAMDAC(dev, head, 0x680c6c);
+
+ /* Prepare the DAC for load detection. */
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC1, true);
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC0, true);
+
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, 1343);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, 1047);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, 1183);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
+ NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
+ NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12 |
+ NV_PRAMDAC_FP_TG_CONTROL_READ_PROG |
+ NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS |
+ NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS);
+
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, 0);
+
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset,
+ (dacclk & ~0xff) | 0x22);
+ msleep(1);
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset,
+ (dacclk & ~0xff) | 0x21);
+
+ NVWriteRAMDAC(dev, head, 0x680c1c, 1 << 20);
+ NVWriteRAMDAC(dev, head, 0x680c14, 4 << 16);
+
+ /* Sample pin 0x4 (usually S-video luma). */
+ NVWriteRAMDAC(dev, head, 0x680c6c, testval >> 10 & 0x3ff);
+ msleep(20);
+ sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset)
+ & 0x4 << 28;
+
+ /* Sample the remaining pins. */
+ NVWriteRAMDAC(dev, head, 0x680c6c, testval & 0x3ff);
+ msleep(20);
+ sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset)
+ & 0xa << 28;
+
+ /* Restore the previous state. */
+ NVWriteRAMDAC(dev, head, 0x680c1c, ctv_1c);
+ NVWriteRAMDAC(dev, head, 0x680c14, ctv_14);
+ NVWriteRAMDAC(dev, head, 0x680c6c, ctv_6c);
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, dacclk);
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, test_ctrl);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL, fp_control);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, fp_hsync_end);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, fp_hsync_start);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, fp_htotal);
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC1, gpio1);
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC0, gpio0);
+
+ return sample;
+}
+
+static enum drm_connector_status
+nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct drm_mode_config *conf = &dev->mode_config;
struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder);
+ struct dcb_entry *dcb = tv_enc->base.dcb;
- tv_enc->pin_mask = pin_mask >> 28 & 0xe;
+ if (dev_priv->chipset == 0x42 ||
+ dev_priv->chipset == 0x43)
+ tv_enc->pin_mask = nv42_tv_sample_load(encoder) >> 28 & 0xe;
+ else
+ tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe;
switch (tv_enc->pin_mask) {
case 0x2:
tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SVIDEO;
break;
case 0xe:
- if (nouveau_encoder(encoder)->dcb->tvconf.has_component_output)
+ if (dcb->tvconf.has_component_output)
tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_Component;
else
tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SCART;
}
drm_connector_property_set_value(connector,
- encoder->dev->mode_config.tv_subconnector_property,
- tv_enc->subconnector);
+ conf->tv_subconnector_property,
+ tv_enc->subconnector);
- return tv_enc->subconnector ? connector_status_connected :
- connector_status_disconnected;
+ if (tv_enc->subconnector) {
+ NV_INFO(dev, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
+ return connector_status_connected;
+ } else {
+ return connector_status_disconnected;
+ }
}
static const struct {
.prepare = nv17_tv_prepare,
.commit = nv17_tv_commit,
.mode_set = nv17_tv_mode_set,
- .detect = nv17_dac_detect,
+ .detect = nv17_tv_detect,
};
static struct drm_encoder_slave_funcs nv17_tv_slave_funcs = {
nouveau_wait_for_idle(dev);
}
+void
+nv20_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1;
+
+ nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV20_PGRAPH_TILE(i), addr);
+
+ nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + 4 * i);
+ nv_wr32(dev, NV10_PGRAPH_RDI_DATA, limit);
+ nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + 4 * i);
+ nv_wr32(dev, NV10_PGRAPH_RDI_DATA, pitch);
+ nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + 4 * i);
+ nv_wr32(dev, NV10_PGRAPH_RDI_DATA, addr);
+}
+
int
nv20_graph_init(struct drm_device *dev)
{
nv_wr32(dev, NV10_PGRAPH_RDI_DATA , 0x00000030);
}
- /* copy tile info from PFB */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, 0x00400904 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- /* which is NV40_PGRAPH_TLIMIT0(i) ?? */
- nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + i * 4);
- nv_wr32(dev, NV10_PGRAPH_RDI_DATA,
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- nv_wr32(dev, 0x00400908 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- /* which is NV40_PGRAPH_TSIZE0(i) ?? */
- nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + i * 4);
- nv_wr32(dev, NV10_PGRAPH_RDI_DATA,
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- nv_wr32(dev, 0x00400900 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TILE(i)));
- /* which is NV40_PGRAPH_TILE0(i) ?? */
- nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + i * 4);
- nv_wr32(dev, NV10_PGRAPH_RDI_DATA,
- nv_rd32(dev, NV10_PFB_TILE(i)));
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
+ nv20_graph_set_region_tiling(dev, i, 0, 0, 0);
+
for (i = 0; i < 8; i++) {
nv_wr32(dev, 0x400980 + i * 4, nv_rd32(dev, 0x100300 + i * 4));
nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0090 + i * 4);
nv_wr32(dev, 0x4000c0, 0x00000016);
- /* copy tile info from PFB */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, 0x00400904 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- /* which is NV40_PGRAPH_TLIMIT0(i) ?? */
- nv_wr32(dev, 0x00400908 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- /* which is NV40_PGRAPH_TSIZE0(i) ?? */
- nv_wr32(dev, 0x00400900 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TILE(i)));
- /* which is NV40_PGRAPH_TILE0(i) ?? */
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
+ nv20_graph_set_region_tiling(dev, i, 0, 0, 0);
nv_wr32(dev, NV10_PGRAPH_CTX_CONTROL, 0x10000100);
nv_wr32(dev, NV10_PGRAPH_STATE , 0xFFFFFFFF);
#include "nouveau_drv.h"
#include "nouveau_drm.h"
+void
+nv40_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1;
+
+ switch (dev_priv->chipset) {
+ case 0x40:
+ nv_wr32(dev, NV10_PFB_TLIMIT(i), limit);
+ nv_wr32(dev, NV10_PFB_TSIZE(i), pitch);
+ nv_wr32(dev, NV10_PFB_TILE(i), addr);
+ break;
+
+ default:
+ nv_wr32(dev, NV40_PFB_TLIMIT(i), limit);
+ nv_wr32(dev, NV40_PFB_TSIZE(i), pitch);
+ nv_wr32(dev, NV40_PFB_TILE(i), addr);
+ break;
+ }
+}
+
int
nv40_fb_init(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t fb_bar_size, tmp;
- int num_tiles;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ uint32_t tmp;
int i;
/* This is strictly a NV4x register (don't know about NV5x). */
case 0x45:
tmp = nv_rd32(dev, NV10_PFB_CLOSE_PAGE2);
nv_wr32(dev, NV10_PFB_CLOSE_PAGE2, tmp & ~(1 << 15));
- num_tiles = NV10_PFB_TILE__SIZE;
+ pfb->num_tiles = NV10_PFB_TILE__SIZE;
break;
case 0x46: /* G72 */
case 0x47: /* G70 */
case 0x49: /* G71 */
case 0x4b: /* G73 */
case 0x4c: /* C51 (G7X version) */
- num_tiles = NV40_PFB_TILE__SIZE_1;
+ pfb->num_tiles = NV40_PFB_TILE__SIZE_1;
break;
default:
- num_tiles = NV40_PFB_TILE__SIZE_0;
+ pfb->num_tiles = NV40_PFB_TILE__SIZE_0;
break;
}
- fb_bar_size = drm_get_resource_len(dev, 0) - 1;
- switch (dev_priv->chipset) {
- case 0x40:
- for (i = 0; i < num_tiles; i++) {
- nv_wr32(dev, NV10_PFB_TILE(i), 0);
- nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size);
- }
- break;
- default:
- for (i = 0; i < num_tiles; i++) {
- nv_wr32(dev, NV40_PFB_TILE(i), 0);
- nv_wr32(dev, NV40_PFB_TLIMIT(i), fb_bar_size);
- }
- break;
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < pfb->num_tiles; i++)
+ pfb->set_region_tiling(dev, i, 0, 0, 0);
return 0;
}
return ret;
}
+void
+nv40_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1;
+
+ switch (dev_priv->chipset) {
+ case 0x44:
+ case 0x4a:
+ case 0x4e:
+ nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV20_PGRAPH_TILE(i), addr);
+ break;
+
+ case 0x46:
+ case 0x47:
+ case 0x49:
+ case 0x4b:
+ nv_wr32(dev, NV47_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV47_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV47_PGRAPH_TILE(i), addr);
+ nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch);
+ nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit);
+ nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr);
+ break;
+
+ default:
+ nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV20_PGRAPH_TILE(i), addr);
+ nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch);
+ nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit);
+ nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr);
+ break;
+ }
+}
+
/*
* G70 0x47
* G71 0x49
{
struct drm_nouveau_private *dev_priv =
(struct drm_nouveau_private *)dev->dev_private;
- uint32_t vramsz, tmp;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ uint32_t vramsz;
int i, j;
nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) &
nv_wr32(dev, 0x400b38, 0x2ffff800);
nv_wr32(dev, 0x400b3c, 0x00006000);
- /* copy tile info from PFB */
- switch (dev_priv->chipset) {
- case 0x40: /* vanilla NV40 */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- tmp = nv_rd32(dev, NV10_PFB_TILE(i));
- nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp);
- tmp = nv_rd32(dev, NV10_PFB_TLIMIT(i));
- nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp);
- tmp = nv_rd32(dev, NV10_PFB_TSIZE(i));
- nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp);
- tmp = nv_rd32(dev, NV10_PFB_TSTATUS(i));
- nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp);
- }
- break;
- case 0x44:
- case 0x4a:
- case 0x4e: /* NV44-based cores don't have 0x406900? */
- for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) {
- tmp = nv_rd32(dev, NV40_PFB_TILE(i));
- nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i));
- nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSIZE(i));
- nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i));
- nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp);
- }
- break;
- case 0x46:
- case 0x47:
- case 0x49:
- case 0x4b: /* G7X-based cores */
- for (i = 0; i < NV40_PFB_TILE__SIZE_1; i++) {
- tmp = nv_rd32(dev, NV40_PFB_TILE(i));
- nv_wr32(dev, NV47_PGRAPH_TILE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i));
- nv_wr32(dev, NV47_PGRAPH_TLIMIT0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSIZE(i));
- nv_wr32(dev, NV47_PGRAPH_TSIZE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i));
- nv_wr32(dev, NV47_PGRAPH_TSTATUS0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp);
- }
- break;
- default: /* everything else */
- for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) {
- tmp = nv_rd32(dev, NV40_PFB_TILE(i));
- nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i));
- nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSIZE(i));
- nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i));
- nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp);
- }
- break;
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < pfb->num_tiles; i++)
+ nv40_graph_set_region_tiling(dev, i, 0, 0, 0);
/* begin RAM config */
vramsz = drm_get_resource_len(dev, 0) - 1;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_encoder *encoder;
+ uint32_t dac = 0, sor = 0;
NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- if (drm_helper_encoder_in_use(encoder))
+ if (!drm_helper_encoder_in_use(encoder))
continue;
+ if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
+ nv_encoder->dcb->type == OUTPUT_TV)
+ dac |= (1 << nv_encoder->or);
+ else
+ sor |= (1 << nv_encoder->or);
+ }
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+ if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
+ nv_encoder->dcb->type == OUTPUT_TV) {
+ if (dac & (1 << nv_encoder->or))
+ continue;
+ } else {
+ if (sor & (1 << nv_encoder->or))
+ continue;
+ }
+
nv_encoder->disconnect(nv_encoder);
}
int pxclk)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_connector *nv_connector = NULL;
+ struct drm_encoder *encoder;
struct nvbios *bios = &dev_priv->VBIOS;
uint32_t mc, script = 0, or;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+ if (nv_encoder->dcb != dcbent)
+ continue;
+
+ nv_connector = nouveau_encoder_connector_get(nv_encoder);
+ break;
+ }
+
or = ffs(dcbent->or) - 1;
mc = nv50_display_mode_ctrl(dev, dcbent->type != OUTPUT_ANALOG, or);
switch (dcbent->type) {
} else
if (bios->fp.strapless_is_24bit & 1)
script |= 0x0200;
+
+ if (nv_connector && nv_connector->edid &&
+ (nv_connector->edid->revision >= 4) &&
+ (nv_connector->edid->input & 0x70) >= 0x20)
+ script |= 0x0200;
}
if (nouveau_uscript_lvds >= 0) {
if (!(info->flags & FBINFO_HWACCEL_DISABLED) &&
RING_SPACE(chan, rect->rop == ROP_COPY ? 7 : 11)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
-
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
OUT_RING(chan, 1);
}
BEGIN_RING(chan, NvSub2D, 0x0588, 1);
- OUT_RING(chan, rect->color);
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+ OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]);
+ else
+ OUT_RING(chan, rect->color);
BEGIN_RING(chan, NvSub2D, 0x0600, 4);
OUT_RING(chan, rect->dx);
OUT_RING(chan, rect->dy);
return;
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 12)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
-
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
}
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 11)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
int push = dwords > 2047 ? 2047 : dwords;
if (RING_SPACE(chan, push + 1)) {
- NV_ERROR(dev,
- "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
cfb_imageblit(info, image);
return;
}
ret = RING_SPACE(chan, 59);
if (ret) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
+ nouveau_fbcon_gpu_lockup(info);
return ret;
}
return ret;
ramfc = chan->ramfc->gpuobj;
- ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 256,
+ ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 1024,
0, &chan->cache);
if (ret)
return ret;
nv_wr32(dev, NV40_PFIFO_CACHE1_DATA(ptr),
nv_ro32(dev, cache, (ptr * 2) + 1));
}
- nv_wr32(dev, 0x3210, cnt << 2);
- nv_wr32(dev, 0x3270, 0);
+ nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, cnt << 2);
+ nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
/* guessing that all the 0x34xx regs aren't on NV50 */
if (!IS_G80) {
dev_priv->engine.instmem.finish_access(dev);
- nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
- nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0);
nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, chan->id | (1<<16));
return 0;
}
nv_wr32(dev, 0x400804, 0xc0000000);
nv_wr32(dev, 0x406800, 0xc0000000);
nv_wr32(dev, 0x400c04, 0xc0000000);
- nv_wr32(dev, 0x401804, 0xc0000000);
+ nv_wr32(dev, 0x401800, 0xc0000000);
nv_wr32(dev, 0x405018, 0xc0000000);
nv_wr32(dev, 0x402000, 0xc0000000);
return 0;
inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE;
+ nouveau_wait_for_idle(dev);
nv_wr32(dev, 0x400500, fifo & ~1);
nv_wr32(dev, 0x400784, inst);
nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20);
{
struct drm_device *dev = encoder->dev;
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_encoder *enc;
uint32_t val;
int or = nv_encoder->or;
NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode);
+ nv_encoder->last_dpms = mode;
+ list_for_each_entry(enc, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nvenc = nouveau_encoder(enc);
+
+ if (nvenc == nv_encoder ||
+ nvenc->dcb->or != nv_encoder->dcb->or)
+ continue;
+
+ if (nvenc->last_dpms == DRM_MODE_DPMS_ON)
+ return;
+ }
+
/* wait for it to be done */
if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or),
NV50_PDISPLAY_SOR_DPMS_CTRL_PENDING, 0)) {
$(obj)/r300_reg_safe.h: $(src)/reg_srcs/r300 $(obj)/mkregtable
$(call if_changed,mkregtable)
+$(obj)/r420_reg_safe.h: $(src)/reg_srcs/r420 $(obj)/mkregtable
+ $(call if_changed,mkregtable)
+
$(obj)/rs600_reg_safe.h: $(src)/reg_srcs/rs600 $(obj)/mkregtable
$(call if_changed,mkregtable)
$(obj)/r300.o: $(obj)/r300_reg_safe.h
+$(obj)/r420.o: $(obj)/r420_reg_safe.h
+
$(obj)/rs600.o: $(obj)/rs600_reg_safe.h
radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
/*
-* Copyright 2006-2007 Advanced Micro Devices, Inc.
+* Copyright 2006-2007 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
/****************************************************/
/* Encoder Object ID Definition */
/****************************************************/
-#define ENCODER_OBJECT_ID_NONE 0x00
+#define ENCODER_OBJECT_ID_NONE 0x00
/* Radeon Class Display Hardware */
#define ENCODER_OBJECT_ID_INTERNAL_LVDS 0x01
#define ENCODER_OBJECT_ID_INTERNAL_TMDS1 0x02
#define ENCODER_OBJECT_ID_INTERNAL_TMDS2 0x03
#define ENCODER_OBJECT_ID_INTERNAL_DAC1 0x04
-#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */
+#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */
#define ENCODER_OBJECT_ID_INTERNAL_SDVOA 0x06
#define ENCODER_OBJECT_ID_INTERNAL_SDVOB 0x07
#define ENCODER_OBJECT_ID_SI170B 0x08
#define ENCODER_OBJECT_ID_CH7303 0x09
#define ENCODER_OBJECT_ID_CH7301 0x0A
-#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */
+#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */
#define ENCODER_OBJECT_ID_EXTERNAL_SDVOA 0x0C
#define ENCODER_OBJECT_ID_EXTERNAL_SDVOB 0x0D
#define ENCODER_OBJECT_ID_TITFP513 0x0E
-#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */
+#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */
#define ENCODER_OBJECT_ID_VT1623 0x10
#define ENCODER_OBJECT_ID_HDMI_SI1930 0x11
#define ENCODER_OBJECT_ID_HDMI_INTERNAL 0x12
#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 0x13
#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 0x14
#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 0x15
-#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */
-#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */
-#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */
+#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */
+#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */
#define ENCODER_OBJECT_ID_INTERNAL_DDI 0x19
#define ENCODER_OBJECT_ID_VT1625 0x1A
#define ENCODER_OBJECT_ID_HDMI_SI1932 0x1B
/****************************************************/
/* Connector Object ID Definition */
/****************************************************/
-#define CONNECTOR_OBJECT_ID_NONE 0x00
+#define CONNECTOR_OBJECT_ID_NONE 0x00
#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I 0x01
#define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I 0x02
#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D 0x03
#define CONNECTOR_OBJECT_ID_SVIDEO 0x07
#define CONNECTOR_OBJECT_ID_YPbPr 0x08
#define CONNECTOR_OBJECT_ID_D_CONNECTOR 0x09
-#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */
+#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */
#define CONNECTOR_OBJECT_ID_SCART 0x0B
#define CONNECTOR_OBJECT_ID_HDMI_TYPE_A 0x0C
#define CONNECTOR_OBJECT_ID_HDMI_TYPE_B 0x0D
#define CONNECTOR_OBJECT_ID_CROSSFIRE 0x11
#define CONNECTOR_OBJECT_ID_HARDCODE_DVI 0x12
#define CONNECTOR_OBJECT_ID_DISPLAYPORT 0x13
+#define CONNECTOR_OBJECT_ID_eDP 0x14
+#define CONNECTOR_OBJECT_ID_MXM 0x15
/* deleted */
#define ROUTER_OBJECT_ID_NONE 0x00
#define ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL 0x01
+/****************************************************/
+/* Generic Object ID Definition */
+/****************************************************/
+#define GENERIC_OBJECT_ID_NONE 0x00
+#define GENERIC_OBJECT_ID_GLSYNC 0x01
+#define GENERIC_OBJECT_ID_PX2_NON_DRIVABLE 0x02
+#define GENERIC_OBJECT_ID_MXM_OPM 0x03
+
/****************************************************/
/* Graphics Object ENUM ID Definition */
/****************************************************/
#define GRAPH_OBJECT_ENUM_ID4 0x04
#define GRAPH_OBJECT_ENUM_ID5 0x05
#define GRAPH_OBJECT_ENUM_ID6 0x06
+#define GRAPH_OBJECT_ENUM_ID7 0x07
/****************************************************/
/* Graphics Object ID Bit definition */
#define RESERVED1_ID_MASK 0x0800
#define OBJECT_TYPE_MASK 0x7000
#define RESERVED2_ID_MASK 0x8000
-
+
#define OBJECT_ID_SHIFT 0x00
#define ENUM_ID_SHIFT 0x08
#define OBJECT_TYPE_SHIFT 0x0C
+
/****************************************************/
/* Graphics Object family definition */
/****************************************************/
-#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) \
- (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \
- GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT)
+#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \
+ GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT)
/****************************************************/
/* GPU Object ID definition - Shared with BIOS */
/****************************************************/
-#define GPU_ENUM_ID1 (GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT)
+#define GPU_ENUM_ID1 ( GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT)
/****************************************************/
/* Encoder Object ID definition - Shared with BIOS */
/****************************************************/
/*
-#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101
#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 0x2102
#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 0x2103
#define ENCODER_INTERNAL_DAC1_ENUM_ID1 0x2104
#define ENCODER_INTERNAL_DAC2_ENUM_ID1 0x2105
#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 0x2106
#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 0x2107
-#define ENCODER_SIL170B_ENUM_ID1 0x2108
+#define ENCODER_SIL170B_ENUM_ID1 0x2108
#define ENCODER_CH7303_ENUM_ID1 0x2109
#define ENCODER_CH7301_ENUM_ID1 0x210A
#define ENCODER_INTERNAL_DVO1_ENUM_ID1 0x210B
#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 0x2113
#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 0x2114
#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 0x2115
-#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116
-#define ENCODER_SI178_ENUM_ID1 0x2117
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116
+#define ENCODER_SI178_ENUM_ID1 0x2117
#define ENCODER_MVPU_FPGA_ENUM_ID1 0x2118
#define ENCODER_INTERNAL_DDI_ENUM_ID1 0x2119
#define ENCODER_VT1625_ENUM_ID1 0x211A
#define ENCODER_DP_DP501_ENUM_ID1 0x211D
#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 0x211E
*/
-#define ENCODER_INTERNAL_LVDS_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_DAC1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_DAC2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT)
-
-#define ENCODER_SIL170B_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT)
-
-#define ENCODER_CH7303_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT)
-
-#define ENCODER_CH7301_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_DVO1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
-
-#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
-
-#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT)
-
-#define ENCODER_TITFP513_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_VT1623_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT)
-
-#define ENCODER_HDMI_SI1930_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT)
-
-#define ENCODER_HDMI_INTERNAL_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) /* Shared with CV/TV and CRT */
-
-#define ENCODER_SI178_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT)
-
-#define ENCODER_MVPU_FPGA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_DDI_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT)
-
-#define ENCODER_VT1625_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT)
-
-#define ENCODER_HDMI_SI1932_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT)
-
-#define ENCODER_DP_DP501_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT)
-
-#define ENCODER_DP_AN9801_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
-
-#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
-
-#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT)
+
+#define ENCODER_SIL170B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT)
+
+#define ENCODER_CH7303_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT)
+
+#define ENCODER_CH7301_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_TITFP513_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_VT1623_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_SI1930_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_INTERNAL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+
+
+#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) // Shared with CV/TV and CRT
+
+#define ENCODER_SI178_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT)
+
+#define ENCODER_MVPU_FPGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DDI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT)
+
+#define ENCODER_VT1625_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_SI1932_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT)
+
+#define ENCODER_DP_DP501_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT)
+
+#define ENCODER_DP_AN9801_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT)
/****************************************************/
/* Connector Object ID definition - Shared with BIOS */
#define CONNECTOR_7PIN_DIN_ENUM_ID1 0x310F
#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 0x3110
*/
-#define CONNECTOR_LVDS_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_VGA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_VGA_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_COMPOSITE_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_SVIDEO_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_YPbPr_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_D_CONNECTOR_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_9PIN_DIN_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_SCART_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_7PIN_DIN_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_CROSSFIRE_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_CROSSFIRE_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DISPLAYPORT_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DISPLAYPORT_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DISPLAYPORT_ENUM_ID3 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
-
-#define CONNECTOR_DISPLAYPORT_ENUM_ID4 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+#define CONNECTOR_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_LVDS_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_eDP_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_eDP_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_VGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_VGA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_COMPOSITE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_COMPOSITE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SVIDEO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SVIDEO_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_YPbPr_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_YPbPr_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_D_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_D_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_9PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_9PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SCART_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SCART_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_7PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+#define CONNECTOR_7PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_MXM_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_A
+
+#define CONNECTOR_MXM_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_B
+
+#define CONNECTOR_MXM_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_C
+
+#define CONNECTOR_MXM_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_D
+
+#define CONNECTOR_MXM_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_TXxx
+
+#define CONNECTOR_MXM_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_UXxx
+
+#define CONNECTOR_MXM_ENUM_ID7 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID7 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DAC
/****************************************************/
/* Router Object ID definition - Shared with BIOS */
/****************************************************/
-#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT)
+#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT)
/* deleted */
+/****************************************************/
+/* Generic Object ID definition - Shared with BIOS */
+/****************************************************/
+#define GENERICOBJECT_GLSYNC_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_GLSYNC << OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_PX2_NON_DRIVABLE_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_PX2_NON_DRIVABLE_ID2 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_MXM_OPM_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_MXM_OPM << OBJECT_ID_SHIFT)
+
/****************************************************/
/* Object Cap definition - Shared with BIOS */
/****************************************************/
#define GRAPHICS_OBJECT_CAP_I2C 0x00000001L
#define GRAPHICS_OBJECT_CAP_TABLE_ID 0x00000002L
+
#define GRAPHICS_OBJECT_I2CCOMMAND_TABLE_ID 0x01
#define GRAPHICS_OBJECT_HOTPLUGDETECTIONINTERUPT_TABLE_ID 0x02
#define GRAPHICS_OBJECT_ENCODER_OUTPUT_PROTECTION_TABLE_ID 0x03
#pragma pack()
#endif
-#endif /*GRAPHICTYPE */
+#endif /*GRAPHICTYPE */
+
+
+
+
case ATOM_WS_ATTRIBUTES:
val = gctx->io_attr;
break;
+ case ATOM_WS_REGPTR:
+ val = gctx->reg_block;
+ break;
default:
val = ctx->ws[idx];
}
return atom_get_src_int(ctx, attr, ptr, NULL, 1);
}
+static uint32_t atom_get_src_direct(atom_exec_context *ctx, uint8_t align, int *ptr)
+{
+ uint32_t val = 0xCDCDCDCD;
+
+ switch (align) {
+ case ATOM_SRC_DWORD:
+ val = U32(*ptr);
+ (*ptr) += 4;
+ break;
+ case ATOM_SRC_WORD0:
+ case ATOM_SRC_WORD8:
+ case ATOM_SRC_WORD16:
+ val = U16(*ptr);
+ (*ptr) += 2;
+ break;
+ case ATOM_SRC_BYTE0:
+ case ATOM_SRC_BYTE8:
+ case ATOM_SRC_BYTE16:
+ case ATOM_SRC_BYTE24:
+ val = U8(*ptr);
+ (*ptr)++;
+ break;
+ }
+ return val;
+}
+
static uint32_t atom_get_dst(atom_exec_context *ctx, int arg, uint8_t attr,
int *ptr, uint32_t *saved, int print)
{
case ATOM_WS_ATTRIBUTES:
gctx->io_attr = val;
break;
+ case ATOM_WS_REGPTR:
+ gctx->reg_block = val;
+ break;
default:
ctx->ws[idx] = val;
}
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
SDEBUG(" src1: ");
- src1 = atom_get_src(ctx, attr, ptr);
+ src1 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr);
SDEBUG(" src2: ");
src2 = atom_get_src(ctx, attr, ptr);
dst &= src1;
SDEBUG(" base: 0x%04X\n", ctx->ctx->reg_block);
}
+static void atom_op_shift_left(atom_exec_context *ctx, int *ptr, int arg)
+{
+ uint8_t attr = U8((*ptr)++), shift;
+ uint32_t saved, dst;
+ int dptr = *ptr;
+ attr &= 0x38;
+ attr |= atom_def_dst[attr >> 3] << 6;
+ SDEBUG(" dst: ");
+ dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr);
+ SDEBUG(" shift: %d\n", shift);
+ dst <<= shift;
+ SDEBUG(" dst: ");
+ atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_shift_right(atom_exec_context *ctx, int *ptr, int arg)
+{
+ uint8_t attr = U8((*ptr)++), shift;
+ uint32_t saved, dst;
+ int dptr = *ptr;
+ attr &= 0x38;
+ attr |= atom_def_dst[attr >> 3] << 6;
+ SDEBUG(" dst: ");
+ dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr);
+ SDEBUG(" shift: %d\n", shift);
+ dst >>= shift;
+ SDEBUG(" dst: ");
+ atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
static void atom_op_shl(atom_exec_context *ctx, int *ptr, int arg)
{
uint8_t attr = U8((*ptr)++), shift;
attr |= atom_def_dst[attr >> 3] << 6;
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
- shift = U8((*ptr)++);
+ shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst <<= shift;
SDEBUG(" dst: ");
attr |= atom_def_dst[attr >> 3] << 6;
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
- shift = U8((*ptr)++);
+ shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst >>= shift;
SDEBUG(" dst: ");
atom_op_or, ATOM_ARG_FB}, {
atom_op_or, ATOM_ARG_PLL}, {
atom_op_or, ATOM_ARG_MC}, {
- atom_op_shl, ATOM_ARG_REG}, {
- atom_op_shl, ATOM_ARG_PS}, {
- atom_op_shl, ATOM_ARG_WS}, {
- atom_op_shl, ATOM_ARG_FB}, {
- atom_op_shl, ATOM_ARG_PLL}, {
- atom_op_shl, ATOM_ARG_MC}, {
- atom_op_shr, ATOM_ARG_REG}, {
- atom_op_shr, ATOM_ARG_PS}, {
- atom_op_shr, ATOM_ARG_WS}, {
- atom_op_shr, ATOM_ARG_FB}, {
- atom_op_shr, ATOM_ARG_PLL}, {
- atom_op_shr, ATOM_ARG_MC}, {
+ atom_op_shift_left, ATOM_ARG_REG}, {
+ atom_op_shift_left, ATOM_ARG_PS}, {
+ atom_op_shift_left, ATOM_ARG_WS}, {
+ atom_op_shift_left, ATOM_ARG_FB}, {
+ atom_op_shift_left, ATOM_ARG_PLL}, {
+ atom_op_shift_left, ATOM_ARG_MC}, {
+ atom_op_shift_right, ATOM_ARG_REG}, {
+ atom_op_shift_right, ATOM_ARG_PS}, {
+ atom_op_shift_right, ATOM_ARG_WS}, {
+ atom_op_shift_right, ATOM_ARG_FB}, {
+ atom_op_shift_right, ATOM_ARG_PLL}, {
+ atom_op_shift_right, ATOM_ARG_MC}, {
atom_op_mul, ATOM_ARG_REG}, {
atom_op_mul, ATOM_ARG_PS}, {
atom_op_mul, ATOM_ARG_WS}, {
SDEBUG(">> execute %04X (len %d, WS %d, PS %d)\n", base, len, ws, ps);
- /* reset reg block */
- ctx->reg_block = 0;
ectx.ctx = ctx;
ectx.ps_shift = ps / 4;
ectx.start = base;
void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
{
mutex_lock(&ctx->mutex);
+ /* reset reg block */
+ ctx->reg_block = 0;
+ /* reset fb window */
+ ctx->fb_base = 0;
+ /* reset io mode */
+ ctx->io_mode = ATOM_IO_MM;
atom_execute_table_locked(ctx, index, params);
mutex_unlock(&ctx->mutex);
}
#define ATOM_WS_AND_MASK 0x45
#define ATOM_WS_FB_WINDOW 0x46
#define ATOM_WS_ATTRIBUTES 0x47
+#define ATOM_WS_REGPTR 0x48
#define ATOM_IIO_NOP 0
#define ATOM_IIO_START 1
args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
args.ucCRTC = radeon_crtc->crtc_id;
- printk("executing set crtc dtd timing\n");
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
args.ucCRTC = radeon_crtc->crtc_id;
- printk("executing set crtc timing\n");
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
}
}
-void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+union adjust_pixel_clock {
+ ADJUST_DISPLAY_PLL_PS_ALLOCATION v1;
+};
+
+static u32 atombios_adjust_pll(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct radeon_pll *pll)
{
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *encoder = NULL;
struct radeon_encoder *radeon_encoder = NULL;
- uint8_t frev, crev;
- int index;
- SET_PIXEL_CLOCK_PS_ALLOCATION args;
- PIXEL_CLOCK_PARAMETERS *spc1_ptr;
- PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr;
- PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr;
- uint32_t pll_clock = mode->clock;
- uint32_t adjusted_clock;
- uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
- struct radeon_pll *pll;
- int pll_flags = 0;
+ u32 adjusted_clock = mode->clock;
- memset(&args, 0, sizeof(args));
+ /* reset the pll flags */
+ pll->flags = 0;
if (ASIC_IS_AVIVO(rdev)) {
if ((rdev->family == CHIP_RS600) ||
(rdev->family == CHIP_RS690) ||
(rdev->family == CHIP_RS740))
- pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
- RADEON_PLL_PREFER_CLOSEST_LOWER);
+ pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+ RADEON_PLL_PREFER_CLOSEST_LOWER);
if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */
- pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+ pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
- pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
} else {
- pll_flags |= RADEON_PLL_LEGACY;
+ pll->flags |= RADEON_PLL_LEGACY;
if (mode->clock > 200000) /* range limits??? */
- pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+ pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
- pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
- if (!ASIC_IS_AVIVO(rdev)) {
- if (encoder->encoder_type !=
- DRM_MODE_ENCODER_DAC)
- pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
- if (encoder->encoder_type ==
- DRM_MODE_ENCODER_LVDS)
- pll_flags |= RADEON_PLL_USE_REF_DIV;
- }
radeon_encoder = to_radeon_encoder(encoder);
+ if (ASIC_IS_AVIVO(rdev)) {
+ /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
+ adjusted_clock = mode->clock * 2;
+ } else {
+ if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
+ pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
+ if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS)
+ pll->flags |= RADEON_PLL_USE_REF_DIV;
+ }
break;
}
}
* special hw requirements.
*/
if (ASIC_IS_DCE3(rdev)) {
- ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args;
+ union adjust_pixel_clock args;
+ struct radeon_encoder_atom_dig *dig;
+ u8 frev, crev;
+ int index;
- if (!encoder)
- return;
-
- memset(&adjust_pll_args, 0, sizeof(adjust_pll_args));
- adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10);
- adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id;
- adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ if (!radeon_encoder->enc_priv)
+ return adjusted_clock;
+ dig = radeon_encoder->enc_priv;
index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll);
- atom_execute_table(rdev->mode_info.atom_context,
- index, (uint32_t *)&adjust_pll_args);
- adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10;
- } else {
- /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
- if (ASIC_IS_AVIVO(rdev) &&
- (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1))
- adjusted_clock = mode->clock * 2;
- else
- adjusted_clock = mode->clock;
+ atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+ &crev);
+
+ memset(&args, 0, sizeof(args));
+
+ switch (frev) {
+ case 1:
+ switch (crev) {
+ case 1:
+ case 2:
+ args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v1.ucTransmitterID = radeon_encoder->encoder_id;
+ args.v1.ucEncodeMode = atombios_get_encoder_mode(encoder);
+
+ atom_execute_table(rdev->mode_info.atom_context,
+ index, (uint32_t *)&args);
+ adjusted_clock = le16_to_cpu(args.v1.usPixelClock) * 10;
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+ return adjusted_clock;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+ return adjusted_clock;
+ }
}
+ return adjusted_clock;
+}
+
+union set_pixel_clock {
+ SET_PIXEL_CLOCK_PS_ALLOCATION base;
+ PIXEL_CLOCK_PARAMETERS v1;
+ PIXEL_CLOCK_PARAMETERS_V2 v2;
+ PIXEL_CLOCK_PARAMETERS_V3 v3;
+};
+
+void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_encoder *encoder = NULL;
+ struct radeon_encoder *radeon_encoder = NULL;
+ u8 frev, crev;
+ int index;
+ union set_pixel_clock args;
+ u32 pll_clock = mode->clock;
+ u32 ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
+ struct radeon_pll *pll;
+ u32 adjusted_clock;
+
+ memset(&args, 0, sizeof(args));
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->crtc == crtc) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ break;
+ }
+ }
+
+ if (!radeon_encoder)
+ return;
if (radeon_crtc->crtc_id == 0)
pll = &rdev->clock.p1pll;
else
pll = &rdev->clock.p2pll;
+ /* adjust pixel clock as needed */
+ adjusted_clock = atombios_adjust_pll(crtc, mode, pll);
+
if (ASIC_IS_AVIVO(rdev)) {
if (radeon_new_pll)
radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock,
&fb_div, &frac_fb_div,
- &ref_div, &post_div, pll_flags);
+ &ref_div, &post_div);
else
radeon_compute_pll(pll, adjusted_clock, &pll_clock,
&fb_div, &frac_fb_div,
- &ref_div, &post_div, pll_flags);
+ &ref_div, &post_div);
} else
radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
- &ref_div, &post_div, pll_flags);
+ &ref_div, &post_div);
index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
case 1:
switch (crev) {
case 1:
- spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput;
- spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
- spc1_ptr->usRefDiv = cpu_to_le16(ref_div);
- spc1_ptr->usFbDiv = cpu_to_le16(fb_div);
- spc1_ptr->ucFracFbDiv = frac_fb_div;
- spc1_ptr->ucPostDiv = post_div;
- spc1_ptr->ucPpll =
+ args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v1.usRefDiv = cpu_to_le16(ref_div);
+ args.v1.usFbDiv = cpu_to_le16(fb_div);
+ args.v1.ucFracFbDiv = frac_fb_div;
+ args.v1.ucPostDiv = post_div;
+ args.v1.ucPpll =
radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- spc1_ptr->ucCRTC = radeon_crtc->crtc_id;
- spc1_ptr->ucRefDivSrc = 1;
+ args.v1.ucCRTC = radeon_crtc->crtc_id;
+ args.v1.ucRefDivSrc = 1;
break;
case 2:
- spc2_ptr =
- (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput;
- spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
- spc2_ptr->usRefDiv = cpu_to_le16(ref_div);
- spc2_ptr->usFbDiv = cpu_to_le16(fb_div);
- spc2_ptr->ucFracFbDiv = frac_fb_div;
- spc2_ptr->ucPostDiv = post_div;
- spc2_ptr->ucPpll =
+ args.v2.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v2.usRefDiv = cpu_to_le16(ref_div);
+ args.v2.usFbDiv = cpu_to_le16(fb_div);
+ args.v2.ucFracFbDiv = frac_fb_div;
+ args.v2.ucPostDiv = post_div;
+ args.v2.ucPpll =
radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- spc2_ptr->ucCRTC = radeon_crtc->crtc_id;
- spc2_ptr->ucRefDivSrc = 1;
+ args.v2.ucCRTC = radeon_crtc->crtc_id;
+ args.v2.ucRefDivSrc = 1;
break;
case 3:
- if (!encoder)
- return;
- spc3_ptr =
- (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput;
- spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
- spc3_ptr->usRefDiv = cpu_to_le16(ref_div);
- spc3_ptr->usFbDiv = cpu_to_le16(fb_div);
- spc3_ptr->ucFracFbDiv = frac_fb_div;
- spc3_ptr->ucPostDiv = post_div;
- spc3_ptr->ucPpll =
+ args.v3.usPixelClock = cpu_to_le16(mode->clock / 10);
+ args.v3.usRefDiv = cpu_to_le16(ref_div);
+ args.v3.usFbDiv = cpu_to_le16(fb_div);
+ args.v3.ucFracFbDiv = frac_fb_div;
+ args.v3.ucPostDiv = post_div;
+ args.v3.ucPpll =
radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- spc3_ptr->ucMiscInfo = (radeon_crtc->crtc_id << 2);
- spc3_ptr->ucTransmitterId = radeon_encoder->encoder_id;
- spc3_ptr->ucEncoderMode =
+ args.v3.ucMiscInfo = (radeon_crtc->crtc_id << 2);
+ args.v3.ucTransmitterId = radeon_encoder->encoder_id;
+ args.v3.ucEncoderMode =
atombios_get_encoder_mode(encoder);
break;
default:
return;
}
- printk("executing set pll\n");
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
-int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
+static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
return 0;
}
+int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (ASIC_IS_AVIVO(rdev))
+ return avivo_crtc_set_base(crtc, x, y, old_fb);
+ else
+ return radeon_crtc_set_base(crtc, x, y, old_fb);
+}
+
+/* properly set additional regs when using atombios */
+static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ u32 disp_merge_cntl;
+
+ switch (radeon_crtc->crtc_id) {
+ case 0:
+ disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
+ disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
+ WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
+ break;
+ case 1:
+ disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
+ disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
+ WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
+ WREG32(RADEON_FP_H2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
+ WREG32(RADEON_FP_V2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
+ break;
+ }
+}
+
int atombios_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
else {
if (radeon_crtc->crtc_id == 0)
atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
- radeon_crtc_set_base(crtc, x, y, old_fb);
- radeon_legacy_atom_set_surface(crtc);
+ atombios_crtc_set_base(crtc, x, y, old_fb);
+ radeon_legacy_atom_fixup(crtc);
}
atombios_overscan_setup(crtc, mode, adjusted_mode);
atombios_scaler_setup(crtc);
static void atombios_crtc_prepare(struct drm_crtc *crtc)
{
- atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
atombios_lock_crtc(crtc, 1);
+ atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
static void atombios_crtc_commit(struct drm_crtc *crtc)
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *dig_connector;
- if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort)
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type != DRM_MODE_CONNECTOR_eDP))
return;
radeon_connector = to_radeon_connector(connector);
u8 train_set[4];
int i;
- if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort)
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type != DRM_MODE_CONNECTOR_eDP))
return;
if (!radeon_encoder->enc_priv)
fseek(file, 0, SEEK_SET);
/* get header */
- if (fgets(buf, 1024, file) == NULL)
+ if (fgets(buf, 1024, file) == NULL) {
+ fclose(file);
return -1;
+ }
/* first line will contain the last register
* and gpu name */
break;
}
}
- r100_irq_set(rdev);
+ if (rdev->irq.installed)
+ r100_irq_set(rdev);
}
void r100_hpd_fini(struct radeon_device *rdev)
{
uint32_t tmp = 0;
+ if (!rdev->irq.installed) {
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WREG32(R_000040_GEN_INT_CNTL, 0);
+ return -EINVAL;
+ }
if (rdev->irq.sw_int) {
tmp |= RADEON_SW_INT_ENABLE;
}
/* Wait until IDLE & CLEAN */
radeon_ring_write(rdev, PACKET0(0x1720, 0));
radeon_ring_write(rdev, (1 << 16) | (1 << 17));
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r100.hdp_cntl |
+ RADEON_HDP_READ_BUFFER_INVALIDATE);
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r100.hdp_cntl);
/* Emit fence sequence & fire IRQ */
radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0));
radeon_ring_write(rdev, fence->seq);
DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
return -EINVAL;
}
+ track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 0));
track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
track->immd_dwords = pkt->count - 1;
r = r100_cs_track_check(p->rdev, track);
r100_hdp_reset(rdev);
}
-void r100_hdp_flush(struct radeon_device *rdev)
-{
- u32 tmp;
- tmp = RREG32(RADEON_HOST_PATH_CNTL);
- tmp |= RADEON_HDP_READ_BUFFER_INVALIDATE;
- WREG32(RADEON_HOST_PATH_CNTL, tmp);
-}
-
void r100_hdp_reset(struct radeon_device *rdev)
{
uint32_t tmp;
}
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
radeon_gem_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_irq_kms_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_bo_fini(rdev);
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ radeon_agp_disable(rdev);
} else {
rdev->mc.gtt_location = rdev->mc.agp_base;
}
case 5:
case 6:
case 7:
+ /* 1D/2D */
track->textures[i].tex_coord_type = 0;
break;
case 1:
- track->textures[i].tex_coord_type = 1;
+ /* CUBE */
+ track->textures[i].tex_coord_type = 2;
break;
case 2:
- track->textures[i].tex_coord_type = 2;
+ /* 3D */
+ track->textures[i].tex_coord_type = 1;
break;
}
break;
#include "rv350d.h"
#include "r300_reg_safe.h"
-/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380 */
+/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380
+ *
+ * GPU Errata:
+ * - HOST_PATH_CNTL: r300 family seems to dislike write to HOST_PATH_CNTL
+ * using MMIO to flush host path read cache, this lead to HARDLOCKUP.
+ * However, scheduling such write to the ring seems harmless, i suspect
+ * the CP read collide with the flush somehow, or maybe the MC, hard to
+ * tell. (Jerome Glisse)
+ */
/*
* rv370,rv380 PCIE GART
/* Wait until IDLE & CLEAN */
radeon_ring_write(rdev, PACKET0(0x1720, 0));
radeon_ring_write(rdev, (1 << 17) | (1 << 16) | (1 << 9));
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r300.hdp_cntl |
+ RADEON_HDP_READ_BUFFER_INVALIDATE);
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r300.hdp_cntl);
/* Emit fence sequence & fire IRQ */
radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0));
radeon_ring_write(rdev, fence->seq);
}
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
rv370_pcie_gart_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_irq_kms_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_bo_fini(rdev);
#include "radeon_reg.h"
#include "radeon.h"
#include "atom.h"
+#include "r100d.h"
#include "r420d.h"
+#include "r420_reg_safe.h"
+
+static void r420_set_reg_safe(struct radeon_device *rdev)
+{
+ rdev->config.r300.reg_safe_bm = r420_reg_safe_bm;
+ rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r420_reg_safe_bm);
+}
int r420_mc_init(struct radeon_device *rdev)
{
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ radeon_agp_disable(rdev);
} else {
rdev->mc.gtt_location = rdev->mc.agp_base;
}
WREG32_PLL(R_00000D_SCLK_CNTL, sclk_cntl);
}
+static void r420_cp_errata_init(struct radeon_device *rdev)
+{
+ /* RV410 and R420 can lock up if CP DMA to host memory happens
+ * while the 2D engine is busy.
+ *
+ * The proper workaround is to queue a RESYNC at the beginning
+ * of the CP init, apparently.
+ */
+ radeon_scratch_get(rdev, &rdev->config.r300.resync_scratch);
+ radeon_ring_lock(rdev, 8);
+ radeon_ring_write(rdev, PACKET0(R300_CP_RESYNC_ADDR, 1));
+ radeon_ring_write(rdev, rdev->config.r300.resync_scratch);
+ radeon_ring_write(rdev, 0xDEADBEEF);
+ radeon_ring_unlock_commit(rdev);
+}
+
+static void r420_cp_errata_fini(struct radeon_device *rdev)
+{
+ /* Catch the RESYNC we dispatched all the way back,
+ * at the very beginning of the CP init.
+ */
+ radeon_ring_lock(rdev, 8);
+ radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, R300_RB3D_DC_FINISH);
+ radeon_ring_unlock_commit(rdev);
+ radeon_scratch_free(rdev, rdev->config.r300.resync_scratch);
+}
+
static int r420_startup(struct radeon_device *rdev)
{
int r;
r420_pipes_init(rdev);
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
return r;
}
+ r420_cp_errata_init(rdev);
r = r100_wb_init(rdev);
if (r) {
dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
int r420_suspend(struct radeon_device *rdev)
{
+ r420_cp_errata_fini(rdev);
r100_cp_disable(rdev);
r100_wb_disable(rdev);
r100_irq_disable(rdev);
if (r)
return r;
}
- r300_set_reg_safe(rdev);
+ r420_set_reg_safe(rdev);
rdev->accel_working = true;
r = r420_startup(rdev);
if (r) {
}
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
}
}
}
- r600_irq_set(rdev);
+ if (rdev->irq.installed)
+ r600_irq_set(rdev);
}
void r600_hpd_fini(struct radeon_device *rdev)
fixed20_12 a;
u32 tmp;
int chansize, numchan;
- int r;
/* Get VRAM informations */
rdev->mc.vram_is_ddr = true;
rdev->mc.real_vram_size = rdev->mc.aper_size;
if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r)
- return r;
/* gtt_size is setup by radeon_agp_init */
rdev->mc.gtt_location = rdev->mc.agp_base;
tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size;
a.full = rfixed_const(100);
rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+
+ if (rdev->flags & RADEON_IS_IGP)
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+
return 0;
}
(void)RREG32(PCIE_PORT_DATA);
}
-void r600_hdp_flush(struct radeon_device *rdev)
-{
- WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
-}
-
/*
* CP & Ring
*/
radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
radeon_ring_write(rdev, ((rdev->fence_drv.scratch_reg - PACKET3_SET_CONFIG_REG_OFFSET) >> 2));
radeon_ring_write(rdev, fence->seq);
+ radeon_ring_write(rdev, PACKET0(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0));
+ radeon_ring_write(rdev, 1);
/* CP_INTERRUPT packet 3 no longer exists, use packet 0 */
radeon_ring_write(rdev, PACKET0(CP_INT_STATUS, 0));
radeon_ring_write(rdev, RB_INT_STAT);
/* FIXME: we should wait for ring to be empty */
r600_cp_stop(rdev);
rdev->cp.ready = false;
+ r600_irq_suspend(rdev);
r600_wb_disable(rdev);
r600_pcie_gart_disable(rdev);
/* unpin shaders bo */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (unlikely(r != 0))
- return r;
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (!r) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ }
+ }
return 0;
}
r = radeon_fence_driver_init(rdev);
if (r)
return r;
+ if (rdev->flags & RADEON_IS_AGP) {
+ r = radeon_agp_init(rdev);
+ if (r)
+ radeon_agp_disable(rdev);
+ }
r = r600_mc_init(rdev);
if (r)
return r;
if (rdev->accel_working) {
r = radeon_ib_pool_init(rdev);
if (r) {
- DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r);
- rdev->accel_working = false;
- }
- r = r600_ib_test(rdev);
- if (r) {
- DRM_ERROR("radeon: failed testing IB (%d).\n", r);
+ dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
rdev->accel_working = false;
+ } else {
+ r = r600_ib_test(rdev);
+ if (r) {
+ dev_err(rdev->dev, "IB test failed (%d).\n", r);
+ rdev->accel_working = false;
+ }
}
}
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
- if (rdev->flags & RADEON_IS_AGP)
- radeon_agp_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_bo_fini(rdev);
radeon_atombios_fini(rdev);
kfree(rdev->bios);
rb_bufsz = drm_order(ring_size / 4);
ring_size = (1 << rb_bufsz) * 4;
rdev->ih.ring_size = ring_size;
- rdev->ih.align_mask = 4 - 1;
+ rdev->ih.ptr_mask = rdev->ih.ring_size - 1;
+ rdev->ih.rptr = 0;
}
-static int r600_ih_ring_alloc(struct radeon_device *rdev, unsigned ring_size)
+static int r600_ih_ring_alloc(struct radeon_device *rdev)
{
int r;
- rdev->ih.ring_size = ring_size;
/* Allocate ring buffer */
if (rdev->ih.ring_obj == NULL) {
r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size,
return r;
}
}
- rdev->ih.ptr_mask = (rdev->cp.ring_size / 4) - 1;
- rdev->ih.rptr = 0;
-
return 0;
}
u32 interrupt_cntl, ih_cntl, ih_rb_cntl;
/* allocate ring */
- ret = r600_ih_ring_alloc(rdev, rdev->ih.ring_size);
+ ret = r600_ih_ring_alloc(rdev);
if (ret)
return ret;
return ret;
}
-void r600_irq_fini(struct radeon_device *rdev)
+void r600_irq_suspend(struct radeon_device *rdev)
{
r600_disable_interrupts(rdev);
r600_rlc_stop(rdev);
+}
+
+void r600_irq_fini(struct radeon_device *rdev)
+{
+ r600_irq_suspend(rdev);
r600_ih_ring_fini(rdev);
}
u32 mode_int = 0;
u32 hpd1, hpd2, hpd3, hpd4 = 0, hpd5 = 0, hpd6 = 0;
+ if (!rdev->irq.installed) {
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ return -EINVAL;
+ }
/* don't enable anything if the ih is disabled */
- if (!rdev->ih.enabled)
+ if (!rdev->ih.enabled) {
+ r600_disable_interrupts(rdev);
+ /* force the active interrupt state to all disabled */
+ r600_disable_interrupt_state(rdev);
return 0;
+ }
if (ASIC_IS_DCE3(rdev)) {
hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
wptr = RREG32(IH_RB_WPTR);
if (wptr & RB_OVERFLOW) {
- WARN_ON(1);
- /* XXX deal with overflow */
- DRM_ERROR("IH RB overflow\n");
+ /* When a ring buffer overflow happen start parsing interrupt
+ * from the last not overwritten vector (wptr + 16). Hopefully
+ * this should allow us to catchup.
+ */
+ dev_warn(rdev->dev, "IH ring buffer overflow (0x%08X, %d, %d)\n",
+ wptr, rdev->ih.rptr, (wptr + 16) + rdev->ih.ptr_mask);
+ rdev->ih.rptr = (wptr + 16) & rdev->ih.ptr_mask;
tmp = RREG32(IH_RB_CNTL);
tmp |= IH_WPTR_OVERFLOW_CLEAR;
WREG32(IH_RB_CNTL, tmp);
}
- wptr = wptr & WPTR_OFFSET_MASK;
-
- return wptr;
+ return (wptr & rdev->ih.ptr_mask);
}
/* r600 IV Ring
u32 wptr = r600_get_ih_wptr(rdev);
u32 rptr = rdev->ih.rptr;
u32 src_id, src_data;
- u32 last_entry = rdev->ih.ring_size - 16;
u32 ring_index, disp_int, disp_int_cont, disp_int_cont2;
unsigned long flags;
bool queue_hotplug = false;
DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+ if (!rdev->ih.enabled)
+ return IRQ_NONE;
spin_lock_irqsave(&rdev->ih.lock, flags);
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
DRM_DEBUG("IH: CP EOP\n");
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
/* wptr/rptr are in bytes! */
- if (rptr == last_entry)
- rptr = 0;
- else
- rptr += 16;
+ rptr += 16;
+ rptr &= rdev->ih.ptr_mask;
}
/* make sure wptr hasn't changed while processing */
wptr = r600_get_ih_wptr(rdev);
{
int r;
+ if (rdev->r600_blit.shader_obj == NULL)
+ return;
+ /* If we can't reserve the bo, unref should be enough to destroy
+ * it when it becomes idle.
+ */
r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (unlikely(r != 0)) {
- dev_err(rdev->dev, "(%d) can't finish r600 blit\n", r);
- goto out_unref;
+ if (!r) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
}
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
-out_unref:
radeon_bo_unref(&rdev->r600_blit.shader_obj);
}
ring_size = num_loops * dwords_per_loop;
/* set default + shaders */
ring_size += 40; /* shaders + def state */
- ring_size += 5; /* fence emit for VB IB */
+ ring_size += 7; /* fence emit for VB IB */
ring_size += 5; /* done copy */
- ring_size += 5; /* fence emit for done copy */
+ ring_size += 7; /* fence emit for done copy */
r = radeon_ring_lock(rdev, ring_size);
WARN_ON(r);
typedef int (*next_reloc_t)(struct radeon_cs_parser*, struct radeon_cs_reloc**);
static next_reloc_t r600_cs_packet_next_reloc = &r600_cs_packet_next_reloc_mm;
+struct r600_cs_track {
+ u32 cb_color0_base_last;
+};
+
/**
* r600_cs_packet_parse() - parse cp packet and point ib index to next packet
* @parser: parser structure holding parsing context.
return 0;
}
+/**
+ * r600_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
+ * @parser: parser structure holding parsing context.
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static inline int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_packet p3reloc;
+ int r;
+
+ r = r600_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r) {
+ return 0;
+ }
+ if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+ return 0;
+ }
+ return 1;
+}
+
/**
* r600_cs_packet_next_vline() - parse userspace VLINE packet
* @parser: parser structure holding parsing context.
struct radeon_cs_packet *pkt)
{
struct radeon_cs_reloc *reloc;
+ struct r600_cs_track *track;
volatile u32 *ib;
unsigned idx;
unsigned i;
int r;
u32 idx_value;
+ track = (struct r600_cs_track *)p->track;
ib = p->ib->ptr;
idx = pkt->idx + 1;
idx_value = radeon_get_ib_value(p, idx);
for (i = 0; i < pkt->count; i++) {
reg = start_reg + (4 * i);
switch (reg) {
+ /* This register were added late, there is userspace
+ * which does provide relocation for those but set
+ * 0 offset. In order to avoid breaking old userspace
+ * we detect this and set address to point to last
+ * CB_COLOR0_BASE, note that if userspace doesn't set
+ * CB_COLOR0_BASE before this register we will report
+ * error. Old userspace always set CB_COLOR0_BASE
+ * before any of this.
+ */
+ case R_0280E0_CB_COLOR0_FRAG:
+ case R_0280E4_CB_COLOR1_FRAG:
+ case R_0280E8_CB_COLOR2_FRAG:
+ case R_0280EC_CB_COLOR3_FRAG:
+ case R_0280F0_CB_COLOR4_FRAG:
+ case R_0280F4_CB_COLOR5_FRAG:
+ case R_0280F8_CB_COLOR6_FRAG:
+ case R_0280FC_CB_COLOR7_FRAG:
+ case R_0280C0_CB_COLOR0_TILE:
+ case R_0280C4_CB_COLOR1_TILE:
+ case R_0280C8_CB_COLOR2_TILE:
+ case R_0280CC_CB_COLOR3_TILE:
+ case R_0280D0_CB_COLOR4_TILE:
+ case R_0280D4_CB_COLOR5_TILE:
+ case R_0280D8_CB_COLOR6_TILE:
+ case R_0280DC_CB_COLOR7_TILE:
+ if (!r600_cs_packet_next_is_pkt3_nop(p)) {
+ if (!track->cb_color0_base_last) {
+ dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] = track->cb_color0_base_last;
+ printk_once(KERN_WARNING "radeon: You have old & broken userspace "
+ "please consider updating mesa & xf86-video-ati\n");
+ } else {
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case DB_DEPTH_BASE:
case DB_HTILE_DATA_BASE:
case CB_COLOR0_BASE:
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color0_base_last = ib[idx+1+i];
+ break;
case CB_COLOR1_BASE:
case CB_COLOR2_BASE:
case CB_COLOR3_BASE:
int r600_cs_parse(struct radeon_cs_parser *p)
{
struct radeon_cs_packet pkt;
+ struct r600_cs_track *track;
int r;
+ track = kzalloc(sizeof(*track), GFP_KERNEL);
+ p->track = track;
do {
r = r600_cs_packet_parse(p, &pkt, p->idx);
if (r) {
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
+ parser.dev = &dev->pdev->dev;
parser.rdev = NULL;
parser.family = family;
parser.ib = &fake_ib;
#define S_000E60_SOFT_RESET_VMC(x) (((x) & 1) << 17)
#define R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
+
+#define R_0280E0_CB_COLOR0_FRAG 0x0280E0
+#define S_0280E0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0280E0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0280E0_BASE_256B 0x00000000
+#define R_0280E4_CB_COLOR1_FRAG 0x0280E4
+#define R_0280E8_CB_COLOR2_FRAG 0x0280E8
+#define R_0280EC_CB_COLOR3_FRAG 0x0280EC
+#define R_0280F0_CB_COLOR4_FRAG 0x0280F0
+#define R_0280F4_CB_COLOR5_FRAG 0x0280F4
+#define R_0280F8_CB_COLOR6_FRAG 0x0280F8
+#define R_0280FC_CB_COLOR7_FRAG 0x0280FC
+#define R_0280C0_CB_COLOR0_TILE 0x0280C0
+#define S_0280C0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0280C0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0280C0_BASE_256B 0x00000000
+#define R_0280C4_CB_COLOR1_TILE 0x0280C4
+#define R_0280C8_CB_COLOR2_TILE 0x0280C8
+#define R_0280CC_CB_COLOR3_TILE 0x0280CC
+#define R_0280D0_CB_COLOR4_TILE 0x0280D0
+#define R_0280D4_CB_COLOR5_TILE 0x0280D4
+#define R_0280D8_CB_COLOR6_TILE 0x0280D8
+#define R_0280DC_CB_COLOR7_TILE 0x0280DC
+
+
#endif
u64 real_vram_size;
int vram_mtrr;
bool vram_is_ddr;
+ bool igp_sideport_enabled;
};
int radeon_mc_setup(struct radeon_device *rdev);
-
+bool radeon_combios_sideport_present(struct radeon_device *rdev);
+bool radeon_atombios_sideport_present(struct radeon_device *rdev);
/*
* GPU scratch registers structures, functions & helpers
unsigned wptr_old;
unsigned ring_size;
uint64_t gpu_addr;
- uint32_t align_mask;
uint32_t ptr_mask;
spinlock_t lock;
bool enabled;
};
struct radeon_cs_parser {
+ struct device *dev;
struct radeon_device *rdev;
struct drm_file *filp;
/* chunks */
uint32_t offset, uint32_t obj_size);
int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
void (*bandwidth_update)(struct radeon_device *rdev);
- void (*hdp_flush)(struct radeon_device *rdev);
void (*hpd_init)(struct radeon_device *rdev);
void (*hpd_fini)(struct radeon_device *rdev);
bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd);
struct r100_asic {
const unsigned *reg_safe_bm;
unsigned reg_safe_bm_size;
+ u32 hdp_cntl;
};
struct r300_asic {
const unsigned *reg_safe_bm;
unsigned reg_safe_bm_size;
+ u32 resync_scratch;
+ u32 hdp_cntl;
};
struct r600_asic {
static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
{
- if (reg < 0x10000)
+ if (reg < rdev->rmmio_size)
return readl(((void __iomem *)rdev->rmmio) + reg);
else {
writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- if (reg < 0x10000)
+ if (reg < rdev->rmmio_size)
writel(v, ((void __iomem *)rdev->rmmio) + reg);
else {
writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
-#define radeon_hdp_flush(rdev) (rdev)->asic->hdp_flush((rdev))
#define radeon_hpd_init(rdev) (rdev)->asic->hpd_init((rdev))
#define radeon_hpd_fini(rdev) (rdev)->asic->hpd_fini((rdev))
#define radeon_hpd_sense(rdev, hpd) (rdev)->asic->hpd_sense((rdev), (hpd))
#define radeon_hpd_set_polarity(rdev, hpd) (rdev)->asic->hpd_set_polarity((rdev), (hpd))
/* Common functions */
+/* AGP */
+extern void radeon_agp_disable(struct radeon_device *rdev);
extern int radeon_gart_table_vram_pin(struct radeon_device *rdev);
extern int radeon_modeset_init(struct radeon_device *rdev);
extern void radeon_modeset_fini(struct radeon_device *rdev);
extern void r600_irq_fini(struct radeon_device *rdev);
extern void r600_ih_ring_init(struct radeon_device *rdev, unsigned ring_size);
extern int r600_irq_set(struct radeon_device *rdev);
-
+extern void r600_irq_suspend(struct radeon_device *rdev);
+/* r600 audio */
extern int r600_audio_init(struct radeon_device *rdev);
extern int r600_audio_tmds_index(struct drm_encoder *encoder);
extern void r600_audio_set_clock(struct drm_encoder *encoder, int clock);
bool is_v3;
int ret;
+ if (rdev->ddev->agp->agp_info.aper_size < 32) {
+ dev_warn(rdev->dev, "AGP aperture to small (%dM) "
+ "need at least 32M, disabling AGP\n",
+ rdev->ddev->agp->agp_info.aper_size);
+ return -EINVAL;
+ }
+
/* Acquire AGP. */
if (!rdev->ddev->agp->acquired) {
ret = drm_agp_acquire(rdev->ddev);
void radeon_agp_fini(struct radeon_device *rdev)
{
#if __OS_HAS_AGP
- if (rdev->flags & RADEON_IS_AGP) {
- if (rdev->ddev->agp && rdev->ddev->agp->acquired) {
- drm_agp_release(rdev->ddev);
- }
+ if (rdev->ddev->agp && rdev->ddev->agp->acquired) {
+ drm_agp_release(rdev->ddev);
}
#endif
}
void r100_bandwidth_update(struct radeon_device *rdev);
void r100_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int r100_ring_test(struct radeon_device *rdev);
-void r100_hdp_flush(struct radeon_device *rdev);
void r100_hpd_init(struct radeon_device *rdev);
void r100_hpd_fini(struct radeon_device *rdev);
bool r100_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
.bandwidth_update = &rs600_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &rs690_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
int r600_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
unsigned num_pages, struct radeon_fence *fence);
-void r600_hdp_flush(struct radeon_device *rdev);
void r600_hpd_init(struct radeon_device *rdev);
void r600_hpd_fini(struct radeon_device *rdev);
bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
.set_surface_reg = r600_set_surface_reg,
.clear_surface_reg = r600_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r600_hdp_flush,
.hpd_init = &r600_hpd_init,
.hpd_fini = &r600_hpd_fini,
.hpd_sense = &r600_hpd_sense,
.set_surface_reg = r600_set_surface_reg,
.clear_surface_reg = r600_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r600_hdp_flush,
.hpd_init = &r600_hpd_init,
.hpd_fini = &r600_hpd_fini,
.hpd_sense = &r600_hpd_sense,
i2c.i2c_id = gpio->sucI2cId.ucAccess;
i2c.valid = true;
+ break;
}
}
DRM_MODE_CONNECTOR_Unknown,
DRM_MODE_CONNECTOR_Unknown,
DRM_MODE_CONNECTOR_Unknown,
- DRM_MODE_CONNECTOR_DisplayPort
+ DRM_MODE_CONNECTOR_DisplayPort,
+ DRM_MODE_CONNECTOR_eDP,
+ DRM_MODE_CONNECTOR_Unknown
};
bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
return false;
}
+union igp_info {
+ struct _ATOM_INTEGRATED_SYSTEM_INFO info;
+ struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2;
+};
+
+bool radeon_atombios_sideport_present(struct radeon_device *rdev)
+{
+ struct radeon_mode_info *mode_info = &rdev->mode_info;
+ int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+ union igp_info *igp_info;
+ u8 frev, crev;
+ u16 data_offset;
+
+ atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
+ &crev, &data_offset);
+
+ igp_info = (union igp_info *)(mode_info->atom_context->bios +
+ data_offset);
+
+ if (igp_info) {
+ switch (crev) {
+ case 1:
+ if (igp_info->info.ucMemoryType & 0xf0)
+ return true;
+ break;
+ case 2:
+ if (igp_info->info_2.ucMemoryType & 0x0f)
+ return true;
+ break;
+ default:
+ DRM_ERROR("Unsupported IGP table: %d %d\n", frev, crev);
+ break;
+ }
+ }
+ return false;
+}
+
bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder,
struct radeon_encoder_int_tmds *tmds)
{
ss->delay = ss_info->asSS_Info[i].ucSS_Delay;
ss->range = ss_info->asSS_Info[i].ucSS_Range;
ss->refdiv = ss_info->asSS_Info[i].ucRecommendedRef_Div;
+ break;
}
}
}
else if (post_div == 3)
sclk >>= 2;
else if (post_div == 4)
- sclk >>= 4;
+ sclk >>= 3;
return sclk;
}
else if (post_div == 3)
mclk >>= 2;
else if (post_div == 4)
- mclk >>= 4;
+ mclk >>= 3;
return mclk;
}
return false;
}
+bool radeon_combios_sideport_present(struct radeon_device *rdev)
+{
+ struct drm_device *dev = rdev->ddev;
+ u16 igp_info;
+
+ igp_info = combios_get_table_offset(dev, COMBIOS_INTEGRATED_SYSTEM_INFO_TABLE);
+
+ if (igp_info) {
+ if (RBIOS16(igp_info + 0x4))
+ return true;
+ }
+ return false;
+}
+
+static const uint32_t default_primarydac_adj[CHIP_LAST] = {
+ 0x00000808, /* r100 */
+ 0x00000808, /* rv100 */
+ 0x00000808, /* rs100 */
+ 0x00000808, /* rv200 */
+ 0x00000808, /* rs200 */
+ 0x00000808, /* r200 */
+ 0x00000808, /* rv250 */
+ 0x00000000, /* rs300 */
+ 0x00000808, /* rv280 */
+ 0x00000808, /* r300 */
+ 0x00000808, /* r350 */
+ 0x00000808, /* rv350 */
+ 0x00000808, /* rv380 */
+ 0x00000808, /* r420 */
+ 0x00000808, /* r423 */
+ 0x00000808, /* rv410 */
+ 0x00000000, /* rs400 */
+ 0x00000000, /* rs480 */
+};
+
+static void radeon_legacy_get_primary_dac_info_from_table(struct radeon_device *rdev,
+ struct radeon_encoder_primary_dac *p_dac)
+{
+ p_dac->ps2_pdac_adj = default_primarydac_adj[rdev->family];
+ return;
+}
+
struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct
radeon_encoder
*encoder)
uint16_t dac_info;
uint8_t rev, bg, dac;
struct radeon_encoder_primary_dac *p_dac = NULL;
+ int found = 0;
- if (rdev->bios == NULL)
+ p_dac = kzalloc(sizeof(struct radeon_encoder_primary_dac),
+ GFP_KERNEL);
+
+ if (!p_dac)
return NULL;
+ if (rdev->bios == NULL)
+ goto out;
+
/* check CRT table */
dac_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
if (dac_info) {
- p_dac =
- kzalloc(sizeof(struct radeon_encoder_primary_dac),
- GFP_KERNEL);
-
- if (!p_dac)
- return NULL;
-
rev = RBIOS8(dac_info) & 0x3;
if (rev < 2) {
bg = RBIOS8(dac_info + 0x2) & 0xf;
dac = RBIOS8(dac_info + 0x3) & 0xf;
p_dac->ps2_pdac_adj = (bg << 8) | (dac);
}
-
+ found = 1;
}
+out:
+ if (!found) /* fallback to defaults */
+ radeon_legacy_get_primary_dac_info_from_table(rdev, p_dac);
+
return p_dac;
}
uint16_t tv_info;
enum radeon_tv_std tv_std = TV_STD_NTSC;
+ if (rdev->bios == NULL)
+ return tv_std;
+
tv_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
if (tv_info) {
if (RBIOS8(tv_info + 6) == 'T') {
if (radeon_connector->hpd.hpd != RADEON_HPD_NONE)
radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
- if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
- if (radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ if ((radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_eDP)) {
if (radeon_dp_needs_link_train(radeon_connector)) {
if (connector->encoder)
dp_link_train(connector->encoder, connector);
ret = connector_status_connected;
}
} else {
- if (radeon_connector->dac_load_detect) {
+ if (radeon_connector->dac_load_detect && encoder) {
encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
}
static int radeon_dvi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
/* XXX check mode bandwidth */
+ /* clocks over 135 MHz have heat issues with DVI on RV100 */
+ if (radeon_connector->use_digital &&
+ (rdev->family == CHIP_RV100) &&
+ (mode->clock > 135000))
+ return MODE_CLOCK_HIGH;
+
if (radeon_connector->use_digital && (mode->clock > 165000)) {
if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) ||
(radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) ||
}
sink_type = radeon_dp_getsinktype(radeon_connector);
- if (sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
+ if ((sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (sink_type == CONNECTOR_OBJECT_ID_eDP)) {
if (radeon_dp_getdpcd(radeon_connector)) {
radeon_dig_connector->dp_sink_type = sink_type;
ret = connector_status_connected;
/* XXX check mode bandwidth */
- if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT)
+ if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return radeon_dp_mode_valid_helper(radeon_connector, mode);
else
return MODE_OK;
subpixel_order = SubPixelHorizontalRGB;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
+ case DRM_MODE_CONNECTOR_eDP:
radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
if (!radeon_dig_connector)
goto failed;
goto failed;
if (i2c_bus->valid) {
/* add DP i2c bus */
- radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch");
+ if (connector_type == DRM_MODE_CONNECTOR_eDP)
+ radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "eDP-auxch");
+ else
+ radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch");
if (!radeon_dig_connector->dp_i2c_bus)
goto failed;
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
+ if (connector_type == DRM_MODE_CONNECTOR_eDP)
+ radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "eDP");
+ else
+ radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
if (!radeon_connector->ddc_bus)
goto failed;
}
&master_priv->sarea);
if (ret) {
DRM_ERROR("SAREA setup failed\n");
+ kfree(master_priv);
return ret;
}
master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
parser.rdev = rdev;
+ parser.dev = rdev->dev;
r = radeon_cs_parser_init(&parser, data);
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
rdev->asic->gart_set_page = &r100_pci_gart_set_page;
}
+ rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
}
void radeon_check_arguments(struct radeon_device *rdev)
*/
int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
{
- struct radeon_device *rdev = dev->dev_private;
+ struct radeon_device *rdev;
struct drm_crtc *crtc;
int r;
- if (dev == NULL || rdev == NULL) {
+ if (dev == NULL || dev->dev_private == NULL) {
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW) {
return 0;
}
+ rdev = dev->dev_private;
+
/* unpin the front buffers */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb);
"INTERNAL_UNIPHY2",
};
-static const char *connector_names[13] = {
+static const char *connector_names[15] = {
"Unknown",
"VGA",
"DVI-I",
"DisplayPort",
"HDMI-A",
"HDMI-B",
+ "TV",
+ "eDP",
};
static const char *hpd_names[7] = {
ret = radeon_get_atom_connector_info_from_object_table(dev);
else
ret = radeon_get_atom_connector_info_from_supported_devices_table(dev);
- } else
+ } else {
ret = radeon_get_legacy_connector_info_from_bios(dev);
+ if (ret == false)
+ ret = radeon_get_legacy_connector_info_from_table(dev);
+ }
} else {
if (!ASIC_IS_AVIVO(rdev))
ret = radeon_get_legacy_connector_info_from_table(dev);
{
int ret = 0;
- if (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
+ if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+ (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
- if (dig->dp_i2c_bus)
+ if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
+ dig->dp_sink_type == CONNECTOR_OBJECT_ID_eDP) && dig->dp_i2c_bus)
radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter);
}
if (!radeon_connector->ddc_bus)
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags)
+ uint32_t *post_div_p)
{
uint32_t min_ref_div = pll->min_ref_div;
uint32_t max_ref_div = pll->max_ref_div;
+ uint32_t min_post_div = pll->min_post_div;
+ uint32_t max_post_div = pll->max_post_div;
uint32_t min_fractional_feed_div = 0;
uint32_t max_fractional_feed_div = 0;
uint32_t best_vco = pll->best_vco;
DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
freq = freq * 1000;
- if (flags & RADEON_PLL_USE_REF_DIV)
+ if (pll->flags & RADEON_PLL_USE_REF_DIV)
min_ref_div = max_ref_div = pll->reference_div;
else {
while (min_ref_div < max_ref_div-1) {
}
}
- if (flags & RADEON_PLL_USE_FRAC_FB_DIV) {
+ if (pll->flags & RADEON_PLL_USE_POST_DIV)
+ min_post_div = max_post_div = pll->post_div;
+
+ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) {
min_fractional_feed_div = pll->min_frac_feedback_div;
max_fractional_feed_div = pll->max_frac_feedback_div;
}
- for (post_div = pll->min_post_div; post_div <= pll->max_post_div; ++post_div) {
+ for (post_div = min_post_div; post_div <= max_post_div; ++post_div) {
uint32_t ref_div;
- if ((flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
+ if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
continue;
/* legacy radeons only have a few post_divs */
- if (flags & RADEON_PLL_LEGACY) {
+ if (pll->flags & RADEON_PLL_LEGACY) {
if ((post_div == 5) ||
(post_div == 7) ||
(post_div == 9) ||
tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
current_freq = radeon_div(tmp, ref_div * post_div);
- if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+ if (pll->flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
error = freq - current_freq;
error = error < 0 ? 0xffffffff : error;
} else
best_freq = current_freq;
best_error = error;
best_vco_diff = vco_diff;
- } else if (((flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
- ((flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
- ((flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
- ((flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
- ((flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
- ((flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
+ } else if (((pll->flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
+ ((pll->flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
best_post_div = post_div;
best_ref_div = ref_div;
best_feedback_div = feedback_div;
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags)
+ uint32_t *post_div_p)
{
fixed20_12 m, n, frac_n, p, f_vco, f_pclk, best_freq;
fixed20_12 pll_out_max, pll_out_min;
radeonfb_remove(dev, fb);
if (radeon_fb->obj) {
- radeon_gem_object_unpin(radeon_fb->obj);
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(radeon_fb->obj);
mutex_unlock(&dev->struct_mutex);
struct drm_gem_object *obj;
obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
-
+ if (obj == NULL) {
+ dev_err(&dev->pdev->dev, "No GEM object associated to handle 0x%08X, "
+ "can't create framebuffer\n", mode_cmd->handle);
+ return NULL;
+ }
return radeon_framebuffer_create(dev, mode_cmd, obj);
}
return ATOM_ENCODER_MODE_LVDS;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
+ case DRM_MODE_CONNECTOR_eDP:
radeon_dig_connector = radeon_connector->con_priv;
- if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT)
+ if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return ATOM_ENCODER_MODE_DP;
else if (drm_detect_hdmi_monitor(radeon_connector->edid))
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
break;
- case CONNECTOR_DVI_A:
- case CONNECTOR_VGA:
+ case DRM_MODE_CONNECTOR_DVIA:
+ case DRM_MODE_CONNECTOR_VGA:
return ATOM_ENCODER_MODE_CRT;
break;
- case CONNECTOR_STV:
- case CONNECTOR_CTV:
- case CONNECTOR_DIN:
+ case DRM_MODE_CONNECTOR_Composite:
+ case DRM_MODE_CONNECTOR_SVIDEO:
+ case DRM_MODE_CONNECTOR_9PinDIN:
/* fix me */
return ATOM_ENCODER_MODE_TV;
/*return ATOM_ENCODER_MODE_CV;*/
bool radeon_fence_signaled(struct radeon_fence *fence)
{
- struct radeon_device *rdev = fence->rdev;
unsigned long irq_flags;
bool signaled = false;
- if (rdev->gpu_lockup) {
+ if (!fence)
return true;
- }
- if (fence == NULL) {
+
+ if (fence->rdev->gpu_lockup)
return true;
- }
+
write_lock_irqsave(&fence->rdev->fence_drv.lock, irq_flags);
signaled = fence->signaled;
/* if we are shuting down report all fence as signaled */
printk(KERN_ERR "Failed to wait for object !\n");
return r;
}
- radeon_hdp_flush(robj->rdev);
}
return 0;
}
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(gobj);
mutex_unlock(&dev->struct_mutex);
- radeon_hdp_flush(robj->rdev);
return r;
}
drm_radeon_irq_emit_t *emit = data;
int result;
- if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600)
- return -EINVAL;
-
- LOCK_TEST_WITH_RETURN(dev, file_priv);
-
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600)
+ return -EINVAL;
+
+ LOCK_TEST_WITH_RETURN(dev, file_priv);
+
result = radeon_emit_irq(dev);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
rdev->irq.sw_int = false;
for (i = 0; i < 2; i++) {
rdev->irq.crtc_vblank_int[i] = false;
+ rdev->irq.hpd[i] = false;
}
radeon_irq_set(rdev);
}
DRM_INFO("radeon: using MSI.\n");
}
}
- drm_irq_install(rdev->ddev);
rdev->irq.installed = true;
+ r = drm_irq_install(rdev->ddev);
+ if (r) {
+ rdev->irq.installed = false;
+ return r;
+ }
DRM_INFO("radeon: irq initialized.\n");
return 0;
}
void radeon_irq_kms_fini(struct radeon_device *rdev)
{
+ drm_vblank_cleanup(rdev->ddev);
if (rdev->irq.installed) {
- rdev->irq.installed = false;
drm_irq_uninstall(rdev->ddev);
+ rdev->irq.installed = false;
if (rdev->msi_enabled)
pci_disable_msi(rdev->pdev);
}
}
}
-/* properly set crtc bpp when using atombios */
-void radeon_legacy_atom_set_surface(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- int format;
- uint32_t crtc_gen_cntl;
- uint32_t disp_merge_cntl;
- uint32_t crtc_pitch;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- format = 2;
- break;
- case 15: /* 555 */
- format = 3;
- break;
- case 16: /* 565 */
- format = 4;
- break;
- case 24: /* RGB */
- format = 5;
- break;
- case 32: /* xRGB */
- format = 6;
- break;
- default:
- return;
- }
-
- crtc_pitch = ((((crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8)) * crtc->fb->bits_per_pixel) +
- ((crtc->fb->bits_per_pixel * 8) - 1)) /
- (crtc->fb->bits_per_pixel * 8));
- crtc_pitch |= crtc_pitch << 16;
-
- WREG32(RADEON_CRTC_PITCH + radeon_crtc->crtc_offset, crtc_pitch);
-
- switch (radeon_crtc->crtc_id) {
- case 0:
- disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
- disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
- WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
-
- crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL) & 0xfffff0ff;
- crtc_gen_cntl |= (format << 8);
- crtc_gen_cntl |= RADEON_CRTC_EXT_DISP_EN;
- WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
- break;
- case 1:
- disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
- disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
- WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
-
- crtc_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL) & 0xfffff0ff;
- crtc_gen_cntl |= (format << 8);
- WREG32(RADEON_CRTC2_GEN_CNTL, crtc_gen_cntl);
- WREG32(RADEON_FP_H2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
- WREG32(RADEON_FP_V2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
- break;
- }
-}
-
int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
uint32_t post_divider = 0;
uint32_t freq = 0;
uint8_t pll_gain;
- int pll_flags = RADEON_PLL_LEGACY;
bool use_bios_divs = false;
/* PLL registers */
uint32_t pll_ref_div = 0;
else
pll = &rdev->clock.p1pll;
+ pll->flags = RADEON_PLL_LEGACY;
+
if (mode->clock > 200000) /* range limits??? */
- pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+ pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
- pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
}
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
- pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
+ pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
if (!rdev->is_atom_bios) {
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
}
}
}
- pll_flags |= RADEON_PLL_USE_REF_DIV;
+ pll->flags |= RADEON_PLL_USE_REF_DIV;
}
}
}
if (!use_bios_divs) {
radeon_compute_pll(pll, mode->clock,
&freq, &feedback_div, &frac_fb_div,
- &reference_div, &post_divider,
- pll_flags);
+ &reference_div, &post_divider);
for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
if (post_div->divider == post_divider)
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man;
int panel_pwr_delay = 2000;
+ bool is_mac = false;
DRM_DEBUG("\n");
if (radeon_encoder->enc_priv) {
}
}
+ /* macs (and possibly some x86 oem systems?) wire up LVDS strangely
+ * Taken from radeonfb.
+ */
+ if ((rdev->mode_info.connector_table == CT_IBOOK) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_EXTERNAL) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_INTERNAL) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_VGA))
+ is_mac = true;
+
switch (mode) {
case DRM_MODE_DPMS_ON:
disp_pwr_man = RREG32(RADEON_DISP_PWR_MAN);
lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
lvds_gen_cntl |= (RADEON_LVDS_ON | RADEON_LVDS_EN | RADEON_LVDS_DIGON | RADEON_LVDS_BLON);
+ if (is_mac)
+ lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN;
lvds_gen_cntl &= ~(RADEON_LVDS_DISPLAY_DIS);
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL_P(RADEON_PIXCLKS_CNTL, 0, ~RADEON_PIXCLK_LVDS_ALWAYS_ONb);
lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS;
- lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+ if (is_mac) {
+ lvds_gen_cntl &= ~RADEON_LVDS_BL_MOD_EN;
+ WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_EN);
+ } else {
+ WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+ }
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
unsigned pix_to_tv;
};
-static const uint16_t hor_timing_NTSC[] = {
+static const uint16_t hor_timing_NTSC[MAX_H_CODE_TIMING_LEN] = {
0x0007,
0x003f,
0x0263,
0
};
-static const uint16_t vert_timing_NTSC[] = {
+static const uint16_t vert_timing_NTSC[MAX_V_CODE_TIMING_LEN] = {
0x2001,
0x200d,
0x1006,
0
};
-static const uint16_t hor_timing_PAL[] = {
+static const uint16_t hor_timing_PAL[MAX_H_CODE_TIMING_LEN] = {
0x0007,
0x0058,
0x027c,
0
};
-static const uint16_t vert_timing_PAL[] = {
+static const uint16_t vert_timing_PAL[MAX_V_CODE_TIMING_LEN] = {
0x2001,
0x200c,
0x1005,
}
flicker_removal = (tmp + 500) / 1000;
- if (flicker_removal < 3)
- flicker_removal = 3;
- for (i = 0; i < 6; ++i) {
+ if (flicker_removal < 2)
+ flicker_removal = 2;
+ for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
if (flicker_removal == SLOPE_limit[i])
break;
}
#define to_radeon_encoder(x) container_of(x, struct radeon_encoder, base)
#define to_radeon_framebuffer(x) container_of(x, struct radeon_framebuffer, base)
-enum radeon_connector_type {
- CONNECTOR_NONE,
- CONNECTOR_VGA,
- CONNECTOR_DVI_I,
- CONNECTOR_DVI_D,
- CONNECTOR_DVI_A,
- CONNECTOR_STV,
- CONNECTOR_CTV,
- CONNECTOR_LVDS,
- CONNECTOR_DIGITAL,
- CONNECTOR_SCART,
- CONNECTOR_HDMI_TYPE_A,
- CONNECTOR_HDMI_TYPE_B,
- CONNECTOR_0XC,
- CONNECTOR_0XD,
- CONNECTOR_DIN,
- CONNECTOR_DISPLAY_PORT,
- CONNECTOR_UNSUPPORTED
-};
-
-enum radeon_dvi_type {
- DVI_AUTO,
- DVI_DIGITAL,
- DVI_ANALOG
-};
-
enum radeon_rmx_type {
RMX_OFF,
RMX_FULL,
#define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
#define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10)
#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
+#define RADEON_PLL_USE_POST_DIV (1 << 12)
struct radeon_pll {
- uint16_t reference_freq;
- uint16_t reference_div;
+ /* reference frequency */
+ uint32_t reference_freq;
+
+ /* fixed dividers */
+ uint32_t reference_div;
+ uint32_t post_div;
+
+ /* pll in/out limits */
uint32_t pll_in_min;
uint32_t pll_in_max;
uint32_t pll_out_min;
uint32_t pll_out_max;
- uint16_t xclk;
+ uint32_t best_vco;
+ /* divider limits */
uint32_t min_ref_div;
uint32_t max_ref_div;
uint32_t min_post_div;
uint32_t max_feedback_div;
uint32_t min_frac_feedback_div;
uint32_t max_frac_feedback_div;
- uint32_t best_vco;
+
+ /* flags for the current clock */
+ uint32_t flags;
+
+ /* pll id */
+ uint32_t id;
};
struct radeon_i2c_chan {
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags);
+ uint32_t *post_div_p);
extern void radeon_compute_pll_avivo(struct radeon_pll *pll,
uint64_t freq,
uint32_t *fb_div_p,
uint32_t *frac_fb_div_p,
uint32_t *ref_div_p,
- uint32_t *post_div_p,
- int flags);
+ uint32_t *post_div_p);
extern void radeon_setup_encoder_clones(struct drm_device *dev);
extern int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb);
-extern void radeon_legacy_atom_set_surface(struct drm_crtc *crtc);
extern int radeon_crtc_cursor_set(struct drm_crtc *crtc,
struct drm_file *file_priv,
int radeon_bo_evict_vram(struct radeon_device *rdev)
{
- if (rdev->flags & RADEON_IS_IGP) {
- /* Useless to evict on IGP chips */
- return 0;
+ /* late 2.6.33 fix IGP hibernate - we need pm ops to do this correct */
+ if (0 && (rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->mc.igp_sideport_enabled == false)
+ /* Useless to evict on IGP chips */
+ return 0;
}
return ttm_bo_evict_mm(&rdev->mman.bdev, TTM_PL_VRAM);
}
rbo = container_of(bo, struct radeon_bo, tbo);
switch (bo->mem.mem_type) {
case TTM_PL_VRAM:
- radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
+ if (rbo->rdev->cp.ready == false)
+ radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_CPU);
+ else
+ radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
break;
case TTM_PL_TT:
default:
0x22b8 SE_TCL_TEX_CYL_WRAP_CTL
0x22c0 SE_TCL_UCP_VERT_BLEND_CNTL
0x22c4 SE_TCL_POINT_SPRITE_CNTL
+0x22d0 SE_PVS_CNTL
+0x22d4 SE_PVS_CONST_CNTL
0x2648 RE_POINTSIZE
0x26c0 RE_TOP_LEFT
0x26c4 RE_MISC
--- /dev/null
+r420 0x4f60
+0x1434 SRC_Y_X
+0x1438 DST_Y_X
+0x143C DST_HEIGHT_WIDTH
+0x146C DP_GUI_MASTER_CNTL
+0x1474 BRUSH_Y_X
+0x1478 DP_BRUSH_BKGD_CLR
+0x147C DP_BRUSH_FRGD_CLR
+0x1480 BRUSH_DATA0
+0x1484 BRUSH_DATA1
+0x1598 DST_WIDTH_HEIGHT
+0x15C0 CLR_CMP_CNTL
+0x15C4 CLR_CMP_CLR_SRC
+0x15C8 CLR_CMP_CLR_DST
+0x15CC CLR_CMP_MSK
+0x15D8 DP_SRC_FRGD_CLR
+0x15DC DP_SRC_BKGD_CLR
+0x1600 DST_LINE_START
+0x1604 DST_LINE_END
+0x1608 DST_LINE_PATCOUNT
+0x16C0 DP_CNTL
+0x16CC DP_WRITE_MSK
+0x16D0 DP_CNTL_XDIR_YDIR_YMAJOR
+0x16E8 DEFAULT_SC_BOTTOM_RIGHT
+0x16EC SC_TOP_LEFT
+0x16F0 SC_BOTTOM_RIGHT
+0x16F4 SRC_SC_BOTTOM_RIGHT
+0x1714 DSTCACHE_CTLSTAT
+0x1720 WAIT_UNTIL
+0x172C RBBM_GUICNTL
+0x1D98 VAP_VPORT_XSCALE
+0x1D9C VAP_VPORT_XOFFSET
+0x1DA0 VAP_VPORT_YSCALE
+0x1DA4 VAP_VPORT_YOFFSET
+0x1DA8 VAP_VPORT_ZSCALE
+0x1DAC VAP_VPORT_ZOFFSET
+0x2080 VAP_CNTL
+0x2090 VAP_OUT_VTX_FMT_0
+0x2094 VAP_OUT_VTX_FMT_1
+0x20B0 VAP_VTE_CNTL
+0x2138 VAP_VF_MIN_VTX_INDX
+0x2140 VAP_CNTL_STATUS
+0x2150 VAP_PROG_STREAM_CNTL_0
+0x2154 VAP_PROG_STREAM_CNTL_1
+0x2158 VAP_PROG_STREAM_CNTL_2
+0x215C VAP_PROG_STREAM_CNTL_3
+0x2160 VAP_PROG_STREAM_CNTL_4
+0x2164 VAP_PROG_STREAM_CNTL_5
+0x2168 VAP_PROG_STREAM_CNTL_6
+0x216C VAP_PROG_STREAM_CNTL_7
+0x2180 VAP_VTX_STATE_CNTL
+0x2184 VAP_VSM_VTX_ASSM
+0x2188 VAP_VTX_STATE_IND_REG_0
+0x218C VAP_VTX_STATE_IND_REG_1
+0x2190 VAP_VTX_STATE_IND_REG_2
+0x2194 VAP_VTX_STATE_IND_REG_3
+0x2198 VAP_VTX_STATE_IND_REG_4
+0x219C VAP_VTX_STATE_IND_REG_5
+0x21A0 VAP_VTX_STATE_IND_REG_6
+0x21A4 VAP_VTX_STATE_IND_REG_7
+0x21A8 VAP_VTX_STATE_IND_REG_8
+0x21AC VAP_VTX_STATE_IND_REG_9
+0x21B0 VAP_VTX_STATE_IND_REG_10
+0x21B4 VAP_VTX_STATE_IND_REG_11
+0x21B8 VAP_VTX_STATE_IND_REG_12
+0x21BC VAP_VTX_STATE_IND_REG_13
+0x21C0 VAP_VTX_STATE_IND_REG_14
+0x21C4 VAP_VTX_STATE_IND_REG_15
+0x21DC VAP_PSC_SGN_NORM_CNTL
+0x21E0 VAP_PROG_STREAM_CNTL_EXT_0
+0x21E4 VAP_PROG_STREAM_CNTL_EXT_1
+0x21E8 VAP_PROG_STREAM_CNTL_EXT_2
+0x21EC VAP_PROG_STREAM_CNTL_EXT_3
+0x21F0 VAP_PROG_STREAM_CNTL_EXT_4
+0x21F4 VAP_PROG_STREAM_CNTL_EXT_5
+0x21F8 VAP_PROG_STREAM_CNTL_EXT_6
+0x21FC VAP_PROG_STREAM_CNTL_EXT_7
+0x2200 VAP_PVS_VECTOR_INDX_REG
+0x2204 VAP_PVS_VECTOR_DATA_REG
+0x2208 VAP_PVS_VECTOR_DATA_REG_128
+0x221C VAP_CLIP_CNTL
+0x2220 VAP_GB_VERT_CLIP_ADJ
+0x2224 VAP_GB_VERT_DISC_ADJ
+0x2228 VAP_GB_HORZ_CLIP_ADJ
+0x222C VAP_GB_HORZ_DISC_ADJ
+0x2230 VAP_PVS_FLOW_CNTL_ADDRS_0
+0x2234 VAP_PVS_FLOW_CNTL_ADDRS_1
+0x2238 VAP_PVS_FLOW_CNTL_ADDRS_2
+0x223C VAP_PVS_FLOW_CNTL_ADDRS_3
+0x2240 VAP_PVS_FLOW_CNTL_ADDRS_4
+0x2244 VAP_PVS_FLOW_CNTL_ADDRS_5
+0x2248 VAP_PVS_FLOW_CNTL_ADDRS_6
+0x224C VAP_PVS_FLOW_CNTL_ADDRS_7
+0x2250 VAP_PVS_FLOW_CNTL_ADDRS_8
+0x2254 VAP_PVS_FLOW_CNTL_ADDRS_9
+0x2258 VAP_PVS_FLOW_CNTL_ADDRS_10
+0x225C VAP_PVS_FLOW_CNTL_ADDRS_11
+0x2260 VAP_PVS_FLOW_CNTL_ADDRS_12
+0x2264 VAP_PVS_FLOW_CNTL_ADDRS_13
+0x2268 VAP_PVS_FLOW_CNTL_ADDRS_14
+0x226C VAP_PVS_FLOW_CNTL_ADDRS_15
+0x2284 VAP_PVS_STATE_FLUSH_REG
+0x2288 VAP_PVS_VTX_TIMEOUT_REG
+0x2290 VAP_PVS_FLOW_CNTL_LOOP_INDEX_0
+0x2294 VAP_PVS_FLOW_CNTL_LOOP_INDEX_1
+0x2298 VAP_PVS_FLOW_CNTL_LOOP_INDEX_2
+0x229C VAP_PVS_FLOW_CNTL_LOOP_INDEX_3
+0x22A0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_4
+0x22A4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_5
+0x22A8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_6
+0x22AC VAP_PVS_FLOW_CNTL_LOOP_INDEX_7
+0x22B0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_8
+0x22B4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_9
+0x22B8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_10
+0x22BC VAP_PVS_FLOW_CNTL_LOOP_INDEX_11
+0x22C0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_12
+0x22C4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_13
+0x22C8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_14
+0x22CC VAP_PVS_FLOW_CNTL_LOOP_INDEX_15
+0x22D0 VAP_PVS_CODE_CNTL_0
+0x22D4 VAP_PVS_CONST_CNTL
+0x22D8 VAP_PVS_CODE_CNTL_1
+0x22DC VAP_PVS_FLOW_CNTL_OPC
+0x342C RB2D_DSTCACHE_CTLSTAT
+0x4000 GB_VAP_RASTER_VTX_FMT_0
+0x4004 GB_VAP_RASTER_VTX_FMT_1
+0x4008 GB_ENABLE
+0x401C GB_SELECT
+0x4020 GB_AA_CONFIG
+0x4024 GB_FIFO_SIZE
+0x4100 TX_INVALTAGS
+0x4200 GA_POINT_S0
+0x4204 GA_POINT_T0
+0x4208 GA_POINT_S1
+0x420C GA_POINT_T1
+0x4214 GA_TRIANGLE_STIPPLE
+0x421C GA_POINT_SIZE
+0x4230 GA_POINT_MINMAX
+0x4234 GA_LINE_CNTL
+0x4238 GA_LINE_STIPPLE_CONFIG
+0x4260 GA_LINE_STIPPLE_VALUE
+0x4264 GA_LINE_S0
+0x4268 GA_LINE_S1
+0x4278 GA_COLOR_CONTROL
+0x427C GA_SOLID_RG
+0x4280 GA_SOLID_BA
+0x4288 GA_POLY_MODE
+0x428C GA_ROUND_MODE
+0x4290 GA_OFFSET
+0x4294 GA_FOG_SCALE
+0x4298 GA_FOG_OFFSET
+0x42A0 SU_TEX_WRAP
+0x42A4 SU_POLY_OFFSET_FRONT_SCALE
+0x42A8 SU_POLY_OFFSET_FRONT_OFFSET
+0x42AC SU_POLY_OFFSET_BACK_SCALE
+0x42B0 SU_POLY_OFFSET_BACK_OFFSET
+0x42B4 SU_POLY_OFFSET_ENABLE
+0x42B8 SU_CULL_MODE
+0x42C0 SU_DEPTH_SCALE
+0x42C4 SU_DEPTH_OFFSET
+0x42C8 SU_REG_DEST
+0x4300 RS_COUNT
+0x4304 RS_INST_COUNT
+0x4310 RS_IP_0
+0x4314 RS_IP_1
+0x4318 RS_IP_2
+0x431C RS_IP_3
+0x4320 RS_IP_4
+0x4324 RS_IP_5
+0x4328 RS_IP_6
+0x432C RS_IP_7
+0x4330 RS_INST_0
+0x4334 RS_INST_1
+0x4338 RS_INST_2
+0x433C RS_INST_3
+0x4340 RS_INST_4
+0x4344 RS_INST_5
+0x4348 RS_INST_6
+0x434C RS_INST_7
+0x4350 RS_INST_8
+0x4354 RS_INST_9
+0x4358 RS_INST_10
+0x435C RS_INST_11
+0x4360 RS_INST_12
+0x4364 RS_INST_13
+0x4368 RS_INST_14
+0x436C RS_INST_15
+0x43A4 SC_HYPERZ_EN
+0x43A8 SC_EDGERULE
+0x43B0 SC_CLIP_0_A
+0x43B4 SC_CLIP_0_B
+0x43B8 SC_CLIP_1_A
+0x43BC SC_CLIP_1_B
+0x43C0 SC_CLIP_2_A
+0x43C4 SC_CLIP_2_B
+0x43C8 SC_CLIP_3_A
+0x43CC SC_CLIP_3_B
+0x43D0 SC_CLIP_RULE
+0x43E0 SC_SCISSOR0
+0x43E8 SC_SCREENDOOR
+0x4440 TX_FILTER1_0
+0x4444 TX_FILTER1_1
+0x4448 TX_FILTER1_2
+0x444C TX_FILTER1_3
+0x4450 TX_FILTER1_4
+0x4454 TX_FILTER1_5
+0x4458 TX_FILTER1_6
+0x445C TX_FILTER1_7
+0x4460 TX_FILTER1_8
+0x4464 TX_FILTER1_9
+0x4468 TX_FILTER1_10
+0x446C TX_FILTER1_11
+0x4470 TX_FILTER1_12
+0x4474 TX_FILTER1_13
+0x4478 TX_FILTER1_14
+0x447C TX_FILTER1_15
+0x4580 TX_CHROMA_KEY_0
+0x4584 TX_CHROMA_KEY_1
+0x4588 TX_CHROMA_KEY_2
+0x458C TX_CHROMA_KEY_3
+0x4590 TX_CHROMA_KEY_4
+0x4594 TX_CHROMA_KEY_5
+0x4598 TX_CHROMA_KEY_6
+0x459C TX_CHROMA_KEY_7
+0x45A0 TX_CHROMA_KEY_8
+0x45A4 TX_CHROMA_KEY_9
+0x45A8 TX_CHROMA_KEY_10
+0x45AC TX_CHROMA_KEY_11
+0x45B0 TX_CHROMA_KEY_12
+0x45B4 TX_CHROMA_KEY_13
+0x45B8 TX_CHROMA_KEY_14
+0x45BC TX_CHROMA_KEY_15
+0x45C0 TX_BORDER_COLOR_0
+0x45C4 TX_BORDER_COLOR_1
+0x45C8 TX_BORDER_COLOR_2
+0x45CC TX_BORDER_COLOR_3
+0x45D0 TX_BORDER_COLOR_4
+0x45D4 TX_BORDER_COLOR_5
+0x45D8 TX_BORDER_COLOR_6
+0x45DC TX_BORDER_COLOR_7
+0x45E0 TX_BORDER_COLOR_8
+0x45E4 TX_BORDER_COLOR_9
+0x45E8 TX_BORDER_COLOR_10
+0x45EC TX_BORDER_COLOR_11
+0x45F0 TX_BORDER_COLOR_12
+0x45F4 TX_BORDER_COLOR_13
+0x45F8 TX_BORDER_COLOR_14
+0x45FC TX_BORDER_COLOR_15
+0x4600 US_CONFIG
+0x4604 US_PIXSIZE
+0x4608 US_CODE_OFFSET
+0x460C US_RESET
+0x4610 US_CODE_ADDR_0
+0x4614 US_CODE_ADDR_1
+0x4618 US_CODE_ADDR_2
+0x461C US_CODE_ADDR_3
+0x4620 US_TEX_INST_0
+0x4624 US_TEX_INST_1
+0x4628 US_TEX_INST_2
+0x462C US_TEX_INST_3
+0x4630 US_TEX_INST_4
+0x4634 US_TEX_INST_5
+0x4638 US_TEX_INST_6
+0x463C US_TEX_INST_7
+0x4640 US_TEX_INST_8
+0x4644 US_TEX_INST_9
+0x4648 US_TEX_INST_10
+0x464C US_TEX_INST_11
+0x4650 US_TEX_INST_12
+0x4654 US_TEX_INST_13
+0x4658 US_TEX_INST_14
+0x465C US_TEX_INST_15
+0x4660 US_TEX_INST_16
+0x4664 US_TEX_INST_17
+0x4668 US_TEX_INST_18
+0x466C US_TEX_INST_19
+0x4670 US_TEX_INST_20
+0x4674 US_TEX_INST_21
+0x4678 US_TEX_INST_22
+0x467C US_TEX_INST_23
+0x4680 US_TEX_INST_24
+0x4684 US_TEX_INST_25
+0x4688 US_TEX_INST_26
+0x468C US_TEX_INST_27
+0x4690 US_TEX_INST_28
+0x4694 US_TEX_INST_29
+0x4698 US_TEX_INST_30
+0x469C US_TEX_INST_31
+0x46A4 US_OUT_FMT_0
+0x46A8 US_OUT_FMT_1
+0x46AC US_OUT_FMT_2
+0x46B0 US_OUT_FMT_3
+0x46B4 US_W_FMT
+0x46B8 US_CODE_BANK
+0x46BC US_CODE_EXT
+0x46C0 US_ALU_RGB_ADDR_0
+0x46C4 US_ALU_RGB_ADDR_1
+0x46C8 US_ALU_RGB_ADDR_2
+0x46CC US_ALU_RGB_ADDR_3
+0x46D0 US_ALU_RGB_ADDR_4
+0x46D4 US_ALU_RGB_ADDR_5
+0x46D8 US_ALU_RGB_ADDR_6
+0x46DC US_ALU_RGB_ADDR_7
+0x46E0 US_ALU_RGB_ADDR_8
+0x46E4 US_ALU_RGB_ADDR_9
+0x46E8 US_ALU_RGB_ADDR_10
+0x46EC US_ALU_RGB_ADDR_11
+0x46F0 US_ALU_RGB_ADDR_12
+0x46F4 US_ALU_RGB_ADDR_13
+0x46F8 US_ALU_RGB_ADDR_14
+0x46FC US_ALU_RGB_ADDR_15
+0x4700 US_ALU_RGB_ADDR_16
+0x4704 US_ALU_RGB_ADDR_17
+0x4708 US_ALU_RGB_ADDR_18
+0x470C US_ALU_RGB_ADDR_19
+0x4710 US_ALU_RGB_ADDR_20
+0x4714 US_ALU_RGB_ADDR_21
+0x4718 US_ALU_RGB_ADDR_22
+0x471C US_ALU_RGB_ADDR_23
+0x4720 US_ALU_RGB_ADDR_24
+0x4724 US_ALU_RGB_ADDR_25
+0x4728 US_ALU_RGB_ADDR_26
+0x472C US_ALU_RGB_ADDR_27
+0x4730 US_ALU_RGB_ADDR_28
+0x4734 US_ALU_RGB_ADDR_29
+0x4738 US_ALU_RGB_ADDR_30
+0x473C US_ALU_RGB_ADDR_31
+0x4740 US_ALU_RGB_ADDR_32
+0x4744 US_ALU_RGB_ADDR_33
+0x4748 US_ALU_RGB_ADDR_34
+0x474C US_ALU_RGB_ADDR_35
+0x4750 US_ALU_RGB_ADDR_36
+0x4754 US_ALU_RGB_ADDR_37
+0x4758 US_ALU_RGB_ADDR_38
+0x475C US_ALU_RGB_ADDR_39
+0x4760 US_ALU_RGB_ADDR_40
+0x4764 US_ALU_RGB_ADDR_41
+0x4768 US_ALU_RGB_ADDR_42
+0x476C US_ALU_RGB_ADDR_43
+0x4770 US_ALU_RGB_ADDR_44
+0x4774 US_ALU_RGB_ADDR_45
+0x4778 US_ALU_RGB_ADDR_46
+0x477C US_ALU_RGB_ADDR_47
+0x4780 US_ALU_RGB_ADDR_48
+0x4784 US_ALU_RGB_ADDR_49
+0x4788 US_ALU_RGB_ADDR_50
+0x478C US_ALU_RGB_ADDR_51
+0x4790 US_ALU_RGB_ADDR_52
+0x4794 US_ALU_RGB_ADDR_53
+0x4798 US_ALU_RGB_ADDR_54
+0x479C US_ALU_RGB_ADDR_55
+0x47A0 US_ALU_RGB_ADDR_56
+0x47A4 US_ALU_RGB_ADDR_57
+0x47A8 US_ALU_RGB_ADDR_58
+0x47AC US_ALU_RGB_ADDR_59
+0x47B0 US_ALU_RGB_ADDR_60
+0x47B4 US_ALU_RGB_ADDR_61
+0x47B8 US_ALU_RGB_ADDR_62
+0x47BC US_ALU_RGB_ADDR_63
+0x47C0 US_ALU_ALPHA_ADDR_0
+0x47C4 US_ALU_ALPHA_ADDR_1
+0x47C8 US_ALU_ALPHA_ADDR_2
+0x47CC US_ALU_ALPHA_ADDR_3
+0x47D0 US_ALU_ALPHA_ADDR_4
+0x47D4 US_ALU_ALPHA_ADDR_5
+0x47D8 US_ALU_ALPHA_ADDR_6
+0x47DC US_ALU_ALPHA_ADDR_7
+0x47E0 US_ALU_ALPHA_ADDR_8
+0x47E4 US_ALU_ALPHA_ADDR_9
+0x47E8 US_ALU_ALPHA_ADDR_10
+0x47EC US_ALU_ALPHA_ADDR_11
+0x47F0 US_ALU_ALPHA_ADDR_12
+0x47F4 US_ALU_ALPHA_ADDR_13
+0x47F8 US_ALU_ALPHA_ADDR_14
+0x47FC US_ALU_ALPHA_ADDR_15
+0x4800 US_ALU_ALPHA_ADDR_16
+0x4804 US_ALU_ALPHA_ADDR_17
+0x4808 US_ALU_ALPHA_ADDR_18
+0x480C US_ALU_ALPHA_ADDR_19
+0x4810 US_ALU_ALPHA_ADDR_20
+0x4814 US_ALU_ALPHA_ADDR_21
+0x4818 US_ALU_ALPHA_ADDR_22
+0x481C US_ALU_ALPHA_ADDR_23
+0x4820 US_ALU_ALPHA_ADDR_24
+0x4824 US_ALU_ALPHA_ADDR_25
+0x4828 US_ALU_ALPHA_ADDR_26
+0x482C US_ALU_ALPHA_ADDR_27
+0x4830 US_ALU_ALPHA_ADDR_28
+0x4834 US_ALU_ALPHA_ADDR_29
+0x4838 US_ALU_ALPHA_ADDR_30
+0x483C US_ALU_ALPHA_ADDR_31
+0x4840 US_ALU_ALPHA_ADDR_32
+0x4844 US_ALU_ALPHA_ADDR_33
+0x4848 US_ALU_ALPHA_ADDR_34
+0x484C US_ALU_ALPHA_ADDR_35
+0x4850 US_ALU_ALPHA_ADDR_36
+0x4854 US_ALU_ALPHA_ADDR_37
+0x4858 US_ALU_ALPHA_ADDR_38
+0x485C US_ALU_ALPHA_ADDR_39
+0x4860 US_ALU_ALPHA_ADDR_40
+0x4864 US_ALU_ALPHA_ADDR_41
+0x4868 US_ALU_ALPHA_ADDR_42
+0x486C US_ALU_ALPHA_ADDR_43
+0x4870 US_ALU_ALPHA_ADDR_44
+0x4874 US_ALU_ALPHA_ADDR_45
+0x4878 US_ALU_ALPHA_ADDR_46
+0x487C US_ALU_ALPHA_ADDR_47
+0x4880 US_ALU_ALPHA_ADDR_48
+0x4884 US_ALU_ALPHA_ADDR_49
+0x4888 US_ALU_ALPHA_ADDR_50
+0x488C US_ALU_ALPHA_ADDR_51
+0x4890 US_ALU_ALPHA_ADDR_52
+0x4894 US_ALU_ALPHA_ADDR_53
+0x4898 US_ALU_ALPHA_ADDR_54
+0x489C US_ALU_ALPHA_ADDR_55
+0x48A0 US_ALU_ALPHA_ADDR_56
+0x48A4 US_ALU_ALPHA_ADDR_57
+0x48A8 US_ALU_ALPHA_ADDR_58
+0x48AC US_ALU_ALPHA_ADDR_59
+0x48B0 US_ALU_ALPHA_ADDR_60
+0x48B4 US_ALU_ALPHA_ADDR_61
+0x48B8 US_ALU_ALPHA_ADDR_62
+0x48BC US_ALU_ALPHA_ADDR_63
+0x48C0 US_ALU_RGB_INST_0
+0x48C4 US_ALU_RGB_INST_1
+0x48C8 US_ALU_RGB_INST_2
+0x48CC US_ALU_RGB_INST_3
+0x48D0 US_ALU_RGB_INST_4
+0x48D4 US_ALU_RGB_INST_5
+0x48D8 US_ALU_RGB_INST_6
+0x48DC US_ALU_RGB_INST_7
+0x48E0 US_ALU_RGB_INST_8
+0x48E4 US_ALU_RGB_INST_9
+0x48E8 US_ALU_RGB_INST_10
+0x48EC US_ALU_RGB_INST_11
+0x48F0 US_ALU_RGB_INST_12
+0x48F4 US_ALU_RGB_INST_13
+0x48F8 US_ALU_RGB_INST_14
+0x48FC US_ALU_RGB_INST_15
+0x4900 US_ALU_RGB_INST_16
+0x4904 US_ALU_RGB_INST_17
+0x4908 US_ALU_RGB_INST_18
+0x490C US_ALU_RGB_INST_19
+0x4910 US_ALU_RGB_INST_20
+0x4914 US_ALU_RGB_INST_21
+0x4918 US_ALU_RGB_INST_22
+0x491C US_ALU_RGB_INST_23
+0x4920 US_ALU_RGB_INST_24
+0x4924 US_ALU_RGB_INST_25
+0x4928 US_ALU_RGB_INST_26
+0x492C US_ALU_RGB_INST_27
+0x4930 US_ALU_RGB_INST_28
+0x4934 US_ALU_RGB_INST_29
+0x4938 US_ALU_RGB_INST_30
+0x493C US_ALU_RGB_INST_31
+0x4940 US_ALU_RGB_INST_32
+0x4944 US_ALU_RGB_INST_33
+0x4948 US_ALU_RGB_INST_34
+0x494C US_ALU_RGB_INST_35
+0x4950 US_ALU_RGB_INST_36
+0x4954 US_ALU_RGB_INST_37
+0x4958 US_ALU_RGB_INST_38
+0x495C US_ALU_RGB_INST_39
+0x4960 US_ALU_RGB_INST_40
+0x4964 US_ALU_RGB_INST_41
+0x4968 US_ALU_RGB_INST_42
+0x496C US_ALU_RGB_INST_43
+0x4970 US_ALU_RGB_INST_44
+0x4974 US_ALU_RGB_INST_45
+0x4978 US_ALU_RGB_INST_46
+0x497C US_ALU_RGB_INST_47
+0x4980 US_ALU_RGB_INST_48
+0x4984 US_ALU_RGB_INST_49
+0x4988 US_ALU_RGB_INST_50
+0x498C US_ALU_RGB_INST_51
+0x4990 US_ALU_RGB_INST_52
+0x4994 US_ALU_RGB_INST_53
+0x4998 US_ALU_RGB_INST_54
+0x499C US_ALU_RGB_INST_55
+0x49A0 US_ALU_RGB_INST_56
+0x49A4 US_ALU_RGB_INST_57
+0x49A8 US_ALU_RGB_INST_58
+0x49AC US_ALU_RGB_INST_59
+0x49B0 US_ALU_RGB_INST_60
+0x49B4 US_ALU_RGB_INST_61
+0x49B8 US_ALU_RGB_INST_62
+0x49BC US_ALU_RGB_INST_63
+0x49C0 US_ALU_ALPHA_INST_0
+0x49C4 US_ALU_ALPHA_INST_1
+0x49C8 US_ALU_ALPHA_INST_2
+0x49CC US_ALU_ALPHA_INST_3
+0x49D0 US_ALU_ALPHA_INST_4
+0x49D4 US_ALU_ALPHA_INST_5
+0x49D8 US_ALU_ALPHA_INST_6
+0x49DC US_ALU_ALPHA_INST_7
+0x49E0 US_ALU_ALPHA_INST_8
+0x49E4 US_ALU_ALPHA_INST_9
+0x49E8 US_ALU_ALPHA_INST_10
+0x49EC US_ALU_ALPHA_INST_11
+0x49F0 US_ALU_ALPHA_INST_12
+0x49F4 US_ALU_ALPHA_INST_13
+0x49F8 US_ALU_ALPHA_INST_14
+0x49FC US_ALU_ALPHA_INST_15
+0x4A00 US_ALU_ALPHA_INST_16
+0x4A04 US_ALU_ALPHA_INST_17
+0x4A08 US_ALU_ALPHA_INST_18
+0x4A0C US_ALU_ALPHA_INST_19
+0x4A10 US_ALU_ALPHA_INST_20
+0x4A14 US_ALU_ALPHA_INST_21
+0x4A18 US_ALU_ALPHA_INST_22
+0x4A1C US_ALU_ALPHA_INST_23
+0x4A20 US_ALU_ALPHA_INST_24
+0x4A24 US_ALU_ALPHA_INST_25
+0x4A28 US_ALU_ALPHA_INST_26
+0x4A2C US_ALU_ALPHA_INST_27
+0x4A30 US_ALU_ALPHA_INST_28
+0x4A34 US_ALU_ALPHA_INST_29
+0x4A38 US_ALU_ALPHA_INST_30
+0x4A3C US_ALU_ALPHA_INST_31
+0x4A40 US_ALU_ALPHA_INST_32
+0x4A44 US_ALU_ALPHA_INST_33
+0x4A48 US_ALU_ALPHA_INST_34
+0x4A4C US_ALU_ALPHA_INST_35
+0x4A50 US_ALU_ALPHA_INST_36
+0x4A54 US_ALU_ALPHA_INST_37
+0x4A58 US_ALU_ALPHA_INST_38
+0x4A5C US_ALU_ALPHA_INST_39
+0x4A60 US_ALU_ALPHA_INST_40
+0x4A64 US_ALU_ALPHA_INST_41
+0x4A68 US_ALU_ALPHA_INST_42
+0x4A6C US_ALU_ALPHA_INST_43
+0x4A70 US_ALU_ALPHA_INST_44
+0x4A74 US_ALU_ALPHA_INST_45
+0x4A78 US_ALU_ALPHA_INST_46
+0x4A7C US_ALU_ALPHA_INST_47
+0x4A80 US_ALU_ALPHA_INST_48
+0x4A84 US_ALU_ALPHA_INST_49
+0x4A88 US_ALU_ALPHA_INST_50
+0x4A8C US_ALU_ALPHA_INST_51
+0x4A90 US_ALU_ALPHA_INST_52
+0x4A94 US_ALU_ALPHA_INST_53
+0x4A98 US_ALU_ALPHA_INST_54
+0x4A9C US_ALU_ALPHA_INST_55
+0x4AA0 US_ALU_ALPHA_INST_56
+0x4AA4 US_ALU_ALPHA_INST_57
+0x4AA8 US_ALU_ALPHA_INST_58
+0x4AAC US_ALU_ALPHA_INST_59
+0x4AB0 US_ALU_ALPHA_INST_60
+0x4AB4 US_ALU_ALPHA_INST_61
+0x4AB8 US_ALU_ALPHA_INST_62
+0x4ABC US_ALU_ALPHA_INST_63
+0x4AC0 US_ALU_EXT_ADDR_0
+0x4AC4 US_ALU_EXT_ADDR_1
+0x4AC8 US_ALU_EXT_ADDR_2
+0x4ACC US_ALU_EXT_ADDR_3
+0x4AD0 US_ALU_EXT_ADDR_4
+0x4AD4 US_ALU_EXT_ADDR_5
+0x4AD8 US_ALU_EXT_ADDR_6
+0x4ADC US_ALU_EXT_ADDR_7
+0x4AE0 US_ALU_EXT_ADDR_8
+0x4AE4 US_ALU_EXT_ADDR_9
+0x4AE8 US_ALU_EXT_ADDR_10
+0x4AEC US_ALU_EXT_ADDR_11
+0x4AF0 US_ALU_EXT_ADDR_12
+0x4AF4 US_ALU_EXT_ADDR_13
+0x4AF8 US_ALU_EXT_ADDR_14
+0x4AFC US_ALU_EXT_ADDR_15
+0x4B00 US_ALU_EXT_ADDR_16
+0x4B04 US_ALU_EXT_ADDR_17
+0x4B08 US_ALU_EXT_ADDR_18
+0x4B0C US_ALU_EXT_ADDR_19
+0x4B10 US_ALU_EXT_ADDR_20
+0x4B14 US_ALU_EXT_ADDR_21
+0x4B18 US_ALU_EXT_ADDR_22
+0x4B1C US_ALU_EXT_ADDR_23
+0x4B20 US_ALU_EXT_ADDR_24
+0x4B24 US_ALU_EXT_ADDR_25
+0x4B28 US_ALU_EXT_ADDR_26
+0x4B2C US_ALU_EXT_ADDR_27
+0x4B30 US_ALU_EXT_ADDR_28
+0x4B34 US_ALU_EXT_ADDR_29
+0x4B38 US_ALU_EXT_ADDR_30
+0x4B3C US_ALU_EXT_ADDR_31
+0x4B40 US_ALU_EXT_ADDR_32
+0x4B44 US_ALU_EXT_ADDR_33
+0x4B48 US_ALU_EXT_ADDR_34
+0x4B4C US_ALU_EXT_ADDR_35
+0x4B50 US_ALU_EXT_ADDR_36
+0x4B54 US_ALU_EXT_ADDR_37
+0x4B58 US_ALU_EXT_ADDR_38
+0x4B5C US_ALU_EXT_ADDR_39
+0x4B60 US_ALU_EXT_ADDR_40
+0x4B64 US_ALU_EXT_ADDR_41
+0x4B68 US_ALU_EXT_ADDR_42
+0x4B6C US_ALU_EXT_ADDR_43
+0x4B70 US_ALU_EXT_ADDR_44
+0x4B74 US_ALU_EXT_ADDR_45
+0x4B78 US_ALU_EXT_ADDR_46
+0x4B7C US_ALU_EXT_ADDR_47
+0x4B80 US_ALU_EXT_ADDR_48
+0x4B84 US_ALU_EXT_ADDR_49
+0x4B88 US_ALU_EXT_ADDR_50
+0x4B8C US_ALU_EXT_ADDR_51
+0x4B90 US_ALU_EXT_ADDR_52
+0x4B94 US_ALU_EXT_ADDR_53
+0x4B98 US_ALU_EXT_ADDR_54
+0x4B9C US_ALU_EXT_ADDR_55
+0x4BA0 US_ALU_EXT_ADDR_56
+0x4BA4 US_ALU_EXT_ADDR_57
+0x4BA8 US_ALU_EXT_ADDR_58
+0x4BAC US_ALU_EXT_ADDR_59
+0x4BB0 US_ALU_EXT_ADDR_60
+0x4BB4 US_ALU_EXT_ADDR_61
+0x4BB8 US_ALU_EXT_ADDR_62
+0x4BBC US_ALU_EXT_ADDR_63
+0x4BC0 FG_FOG_BLEND
+0x4BC4 FG_FOG_FACTOR
+0x4BC8 FG_FOG_COLOR_R
+0x4BCC FG_FOG_COLOR_G
+0x4BD0 FG_FOG_COLOR_B
+0x4BD4 FG_ALPHA_FUNC
+0x4BD8 FG_DEPTH_SRC
+0x4C00 US_ALU_CONST_R_0
+0x4C04 US_ALU_CONST_G_0
+0x4C08 US_ALU_CONST_B_0
+0x4C0C US_ALU_CONST_A_0
+0x4C10 US_ALU_CONST_R_1
+0x4C14 US_ALU_CONST_G_1
+0x4C18 US_ALU_CONST_B_1
+0x4C1C US_ALU_CONST_A_1
+0x4C20 US_ALU_CONST_R_2
+0x4C24 US_ALU_CONST_G_2
+0x4C28 US_ALU_CONST_B_2
+0x4C2C US_ALU_CONST_A_2
+0x4C30 US_ALU_CONST_R_3
+0x4C34 US_ALU_CONST_G_3
+0x4C38 US_ALU_CONST_B_3
+0x4C3C US_ALU_CONST_A_3
+0x4C40 US_ALU_CONST_R_4
+0x4C44 US_ALU_CONST_G_4
+0x4C48 US_ALU_CONST_B_4
+0x4C4C US_ALU_CONST_A_4
+0x4C50 US_ALU_CONST_R_5
+0x4C54 US_ALU_CONST_G_5
+0x4C58 US_ALU_CONST_B_5
+0x4C5C US_ALU_CONST_A_5
+0x4C60 US_ALU_CONST_R_6
+0x4C64 US_ALU_CONST_G_6
+0x4C68 US_ALU_CONST_B_6
+0x4C6C US_ALU_CONST_A_6
+0x4C70 US_ALU_CONST_R_7
+0x4C74 US_ALU_CONST_G_7
+0x4C78 US_ALU_CONST_B_7
+0x4C7C US_ALU_CONST_A_7
+0x4C80 US_ALU_CONST_R_8
+0x4C84 US_ALU_CONST_G_8
+0x4C88 US_ALU_CONST_B_8
+0x4C8C US_ALU_CONST_A_8
+0x4C90 US_ALU_CONST_R_9
+0x4C94 US_ALU_CONST_G_9
+0x4C98 US_ALU_CONST_B_9
+0x4C9C US_ALU_CONST_A_9
+0x4CA0 US_ALU_CONST_R_10
+0x4CA4 US_ALU_CONST_G_10
+0x4CA8 US_ALU_CONST_B_10
+0x4CAC US_ALU_CONST_A_10
+0x4CB0 US_ALU_CONST_R_11
+0x4CB4 US_ALU_CONST_G_11
+0x4CB8 US_ALU_CONST_B_11
+0x4CBC US_ALU_CONST_A_11
+0x4CC0 US_ALU_CONST_R_12
+0x4CC4 US_ALU_CONST_G_12
+0x4CC8 US_ALU_CONST_B_12
+0x4CCC US_ALU_CONST_A_12
+0x4CD0 US_ALU_CONST_R_13
+0x4CD4 US_ALU_CONST_G_13
+0x4CD8 US_ALU_CONST_B_13
+0x4CDC US_ALU_CONST_A_13
+0x4CE0 US_ALU_CONST_R_14
+0x4CE4 US_ALU_CONST_G_14
+0x4CE8 US_ALU_CONST_B_14
+0x4CEC US_ALU_CONST_A_14
+0x4CF0 US_ALU_CONST_R_15
+0x4CF4 US_ALU_CONST_G_15
+0x4CF8 US_ALU_CONST_B_15
+0x4CFC US_ALU_CONST_A_15
+0x4D00 US_ALU_CONST_R_16
+0x4D04 US_ALU_CONST_G_16
+0x4D08 US_ALU_CONST_B_16
+0x4D0C US_ALU_CONST_A_16
+0x4D10 US_ALU_CONST_R_17
+0x4D14 US_ALU_CONST_G_17
+0x4D18 US_ALU_CONST_B_17
+0x4D1C US_ALU_CONST_A_17
+0x4D20 US_ALU_CONST_R_18
+0x4D24 US_ALU_CONST_G_18
+0x4D28 US_ALU_CONST_B_18
+0x4D2C US_ALU_CONST_A_18
+0x4D30 US_ALU_CONST_R_19
+0x4D34 US_ALU_CONST_G_19
+0x4D38 US_ALU_CONST_B_19
+0x4D3C US_ALU_CONST_A_19
+0x4D40 US_ALU_CONST_R_20
+0x4D44 US_ALU_CONST_G_20
+0x4D48 US_ALU_CONST_B_20
+0x4D4C US_ALU_CONST_A_20
+0x4D50 US_ALU_CONST_R_21
+0x4D54 US_ALU_CONST_G_21
+0x4D58 US_ALU_CONST_B_21
+0x4D5C US_ALU_CONST_A_21
+0x4D60 US_ALU_CONST_R_22
+0x4D64 US_ALU_CONST_G_22
+0x4D68 US_ALU_CONST_B_22
+0x4D6C US_ALU_CONST_A_22
+0x4D70 US_ALU_CONST_R_23
+0x4D74 US_ALU_CONST_G_23
+0x4D78 US_ALU_CONST_B_23
+0x4D7C US_ALU_CONST_A_23
+0x4D80 US_ALU_CONST_R_24
+0x4D84 US_ALU_CONST_G_24
+0x4D88 US_ALU_CONST_B_24
+0x4D8C US_ALU_CONST_A_24
+0x4D90 US_ALU_CONST_R_25
+0x4D94 US_ALU_CONST_G_25
+0x4D98 US_ALU_CONST_B_25
+0x4D9C US_ALU_CONST_A_25
+0x4DA0 US_ALU_CONST_R_26
+0x4DA4 US_ALU_CONST_G_26
+0x4DA8 US_ALU_CONST_B_26
+0x4DAC US_ALU_CONST_A_26
+0x4DB0 US_ALU_CONST_R_27
+0x4DB4 US_ALU_CONST_G_27
+0x4DB8 US_ALU_CONST_B_27
+0x4DBC US_ALU_CONST_A_27
+0x4DC0 US_ALU_CONST_R_28
+0x4DC4 US_ALU_CONST_G_28
+0x4DC8 US_ALU_CONST_B_28
+0x4DCC US_ALU_CONST_A_28
+0x4DD0 US_ALU_CONST_R_29
+0x4DD4 US_ALU_CONST_G_29
+0x4DD8 US_ALU_CONST_B_29
+0x4DDC US_ALU_CONST_A_29
+0x4DE0 US_ALU_CONST_R_30
+0x4DE4 US_ALU_CONST_G_30
+0x4DE8 US_ALU_CONST_B_30
+0x4DEC US_ALU_CONST_A_30
+0x4DF0 US_ALU_CONST_R_31
+0x4DF4 US_ALU_CONST_G_31
+0x4DF8 US_ALU_CONST_B_31
+0x4DFC US_ALU_CONST_A_31
+0x4E04 RB3D_BLENDCNTL_R3
+0x4E08 RB3D_ABLENDCNTL_R3
+0x4E0C RB3D_COLOR_CHANNEL_MASK
+0x4E10 RB3D_CONSTANT_COLOR
+0x4E14 RB3D_COLOR_CLEAR_VALUE
+0x4E18 RB3D_ROPCNTL_R3
+0x4E1C RB3D_CLRCMP_FLIPE_R3
+0x4E20 RB3D_CLRCMP_CLR_R3
+0x4E24 RB3D_CLRCMP_MSK_R3
+0x4E48 RB3D_DEBUG_CTL
+0x4E4C RB3D_DSTCACHE_CTLSTAT_R3
+0x4E50 RB3D_DITHER_CTL
+0x4E54 RB3D_CMASK_OFFSET0
+0x4E58 RB3D_CMASK_OFFSET1
+0x4E5C RB3D_CMASK_OFFSET2
+0x4E60 RB3D_CMASK_OFFSET3
+0x4E64 RB3D_CMASK_PITCH0
+0x4E68 RB3D_CMASK_PITCH1
+0x4E6C RB3D_CMASK_PITCH2
+0x4E70 RB3D_CMASK_PITCH3
+0x4E74 RB3D_CMASK_WRINDEX
+0x4E78 RB3D_CMASK_DWORD
+0x4E7C RB3D_CMASK_RDINDEX
+0x4E80 RB3D_AARESOLVE_OFFSET
+0x4E84 RB3D_AARESOLVE_PITCH
+0x4E88 RB3D_AARESOLVE_CTL
+0x4EA0 RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD
+0x4EA4 RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD
+0x4F04 ZB_ZSTENCILCNTL
+0x4F08 ZB_STENCILREFMASK
+0x4F14 ZB_ZTOP
+0x4F18 ZB_ZCACHE_CTLSTAT
+0x4F1C ZB_BW_CNTL
+0x4F28 ZB_DEPTHCLEARVALUE
+0x4F30 ZB_ZMASK_OFFSET
+0x4F34 ZB_ZMASK_PITCH
+0x4F38 ZB_ZMASK_WRINDEX
+0x4F3C ZB_ZMASK_DWORD
+0x4F40 ZB_ZMASK_RDINDEX
+0x4F44 ZB_HIZ_OFFSET
+0x4F48 ZB_HIZ_WRINDEX
+0x4F4C ZB_HIZ_DWORD
+0x4F50 ZB_HIZ_RDINDEX
+0x4F54 ZB_HIZ_PITCH
+0x4F58 ZB_ZPASS_DATA
0x42A4 SU_POLY_OFFSET_FRONT_SCALE
0x42A8 SU_POLY_OFFSET_FRONT_OFFSET
0x42AC SU_POLY_OFFSET_BACK_SCALE
-0x42B0 SU_POLY_OFFSET_BACK_OFFSET
+0x42B0 SU_POLY_OFFSET_BACK_OFFSET
0x42B4 SU_POLY_OFFSET_ENABLE
0x42B8 SU_CULL_MODE
0x42C0 SU_DEPTH_SCALE
0x46AC US_OUT_FMT_2
0x46B0 US_OUT_FMT_3
0x46B4 US_W_FMT
+0x46B8 US_CODE_BANK
+0x46BC US_CODE_EXT
0x46C0 US_ALU_RGB_ADDR_0
0x46C4 US_ALU_RGB_ADDR_1
0x46C8 US_ALU_RGB_ADDR_2
0x4AB4 US_ALU_ALPHA_INST_61
0x4AB8 US_ALU_ALPHA_INST_62
0x4ABC US_ALU_ALPHA_INST_63
+0x4AC0 US_ALU_EXT_ADDR_0
+0x4AC4 US_ALU_EXT_ADDR_1
+0x4AC8 US_ALU_EXT_ADDR_2
+0x4ACC US_ALU_EXT_ADDR_3
+0x4AD0 US_ALU_EXT_ADDR_4
+0x4AD4 US_ALU_EXT_ADDR_5
+0x4AD8 US_ALU_EXT_ADDR_6
+0x4ADC US_ALU_EXT_ADDR_7
+0x4AE0 US_ALU_EXT_ADDR_8
+0x4AE4 US_ALU_EXT_ADDR_9
+0x4AE8 US_ALU_EXT_ADDR_10
+0x4AEC US_ALU_EXT_ADDR_11
+0x4AF0 US_ALU_EXT_ADDR_12
+0x4AF4 US_ALU_EXT_ADDR_13
+0x4AF8 US_ALU_EXT_ADDR_14
+0x4AFC US_ALU_EXT_ADDR_15
+0x4B00 US_ALU_EXT_ADDR_16
+0x4B04 US_ALU_EXT_ADDR_17
+0x4B08 US_ALU_EXT_ADDR_18
+0x4B0C US_ALU_EXT_ADDR_19
+0x4B10 US_ALU_EXT_ADDR_20
+0x4B14 US_ALU_EXT_ADDR_21
+0x4B18 US_ALU_EXT_ADDR_22
+0x4B1C US_ALU_EXT_ADDR_23
+0x4B20 US_ALU_EXT_ADDR_24
+0x4B24 US_ALU_EXT_ADDR_25
+0x4B28 US_ALU_EXT_ADDR_26
+0x4B2C US_ALU_EXT_ADDR_27
+0x4B30 US_ALU_EXT_ADDR_28
+0x4B34 US_ALU_EXT_ADDR_29
+0x4B38 US_ALU_EXT_ADDR_30
+0x4B3C US_ALU_EXT_ADDR_31
+0x4B40 US_ALU_EXT_ADDR_32
+0x4B44 US_ALU_EXT_ADDR_33
+0x4B48 US_ALU_EXT_ADDR_34
+0x4B4C US_ALU_EXT_ADDR_35
+0x4B50 US_ALU_EXT_ADDR_36
+0x4B54 US_ALU_EXT_ADDR_37
+0x4B58 US_ALU_EXT_ADDR_38
+0x4B5C US_ALU_EXT_ADDR_39
+0x4B60 US_ALU_EXT_ADDR_40
+0x4B64 US_ALU_EXT_ADDR_41
+0x4B68 US_ALU_EXT_ADDR_42
+0x4B6C US_ALU_EXT_ADDR_43
+0x4B70 US_ALU_EXT_ADDR_44
+0x4B74 US_ALU_EXT_ADDR_45
+0x4B78 US_ALU_EXT_ADDR_46
+0x4B7C US_ALU_EXT_ADDR_47
+0x4B80 US_ALU_EXT_ADDR_48
+0x4B84 US_ALU_EXT_ADDR_49
+0x4B88 US_ALU_EXT_ADDR_50
+0x4B8C US_ALU_EXT_ADDR_51
+0x4B90 US_ALU_EXT_ADDR_52
+0x4B94 US_ALU_EXT_ADDR_53
+0x4B98 US_ALU_EXT_ADDR_54
+0x4B9C US_ALU_EXT_ADDR_55
+0x4BA0 US_ALU_EXT_ADDR_56
+0x4BA4 US_ALU_EXT_ADDR_57
+0x4BA8 US_ALU_EXT_ADDR_58
+0x4BAC US_ALU_EXT_ADDR_59
+0x4BB0 US_ALU_EXT_ADDR_60
+0x4BB4 US_ALU_EXT_ADDR_61
+0x4BB8 US_ALU_EXT_ADDR_62
+0x4BBC US_ALU_EXT_ADDR_63
0x4BC0 FG_FOG_BLEND
0x4BC4 FG_FOG_FACTOR
0x4BC8 FG_FOG_COLOR_R
0x401C GB_SELECT
0x4020 GB_AA_CONFIG
0x4024 GB_FIFO_SIZE
+0x4028 GB_Z_PEQ_CONFIG
0x4100 TX_INVALTAGS
+0x4114 SU_TEX_WRAP_PS3
+0x4118 PS3_ENABLE
+0x411c PS3_VTX_FMT
+0x4120 PS3_TEX_SOURCE
0x4200 GA_POINT_S0
0x4204 GA_POINT_T0
0x4208 GA_POINT_S1
0x4230 GA_POINT_MINMAX
0x4234 GA_LINE_CNTL
0x4238 GA_LINE_STIPPLE_CONFIG
+0x4258 GA_COLOR_CONTROL_PS3
0x4260 GA_LINE_STIPPLE_VALUE
0x4264 GA_LINE_S0
0x4268 GA_LINE_S1
rdev->mc.vram_location = G_00015C_MC_FB_START(tmp) << 16;
rdev->mc.gtt_location = 0xFFFFFFFFUL;
r = radeon_mc_setup(rdev);
+ rdev->mc.igp_sideport_enabled = radeon_combios_sideport_present(rdev);
if (r)
return r;
return 0;
return r;
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
rdev->mc.vram_location = G_000004_MC_FB_START(tmp) << 16;
rdev->mc.gtt_location = 0xffffffffUL;
r = radeon_mc_setup(rdev);
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
if (r)
return r;
return 0;
break;
}
}
- rs600_irq_set(rdev);
+ if (rdev->irq.installed)
+ rs600_irq_set(rdev);
}
void rs600_hpd_fini(struct radeon_device *rdev)
u32 hpd2 = RREG32(R_007D18_DC_HOT_PLUG_DETECT2_INT_CONTROL) &
~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
+ if (!rdev->irq.installed) {
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WREG32(R_000040_GEN_INT_CNTL, 0);
+ return -EINVAL;
+ }
if (rdev->irq.sw_int) {
tmp |= S_000040_SW_INT_EN(1);
}
}
while (status || r500_disp_int) {
/* SW interrupt */
- if (G_000040_SW_INT_EN(status))
+ if (G_000044_SW_INT(status))
radeon_fence_process(rdev);
/* Vertical blank interrupts */
if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int))
return r;
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
rdev->mc.vram_location = G_000100_MC_FB_START(tmp) << 16;
rdev->mc.gtt_location = 0xFFFFFFFFUL;
r = radeon_mc_setup(rdev);
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
if (r)
return r;
return 0;
return r;
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
}
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
fixed20_12 a;
u32 tmp;
int chansize, numchan;
- int r;
/* Get VRAM informations */
rdev->mc.vram_is_ddr = true;
rdev->mc.real_vram_size = rdev->mc.aper_size;
if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r)
- return r;
/* gtt_size is setup by radeon_agp_init */
rdev->mc.gtt_location = rdev->mc.agp_base;
tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size;
/* FIXME: we should wait for ring to be empty */
r700_cp_stop(rdev);
rdev->cp.ready = false;
+ r600_irq_suspend(rdev);
r600_wb_disable(rdev);
rv770_pcie_gart_disable(rdev);
/* unpin shaders bo */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (likely(r == 0)) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (likely(r == 0)) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ }
}
return 0;
}
r = radeon_fence_driver_init(rdev);
if (r)
return r;
+ if (rdev->flags & RADEON_IS_AGP) {
+ r = radeon_agp_init(rdev);
+ if (r)
+ radeon_agp_disable(rdev);
+ }
r = rv770_mc_init(rdev);
if (r)
return r;
if (rdev->accel_working) {
r = radeon_ib_pool_init(rdev);
if (r) {
- DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r);
- rdev->accel_working = false;
- }
- r = r600_ib_test(rdev);
- if (r) {
- DRM_ERROR("radeon: failed testing IB (%d).\n", r);
+ dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
rdev->accel_working = false;
+ } else {
+ r = r600_ib_test(rdev);
+ if (r) {
+ dev_err(rdev->dev, "IB test failed (%d).\n", r);
+ rdev->accel_working = false;
+ }
}
}
return 0;
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
- if (rdev->flags & RADEON_IS_AGP)
- radeon_agp_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_bo_fini(rdev);
radeon_atombios_fini(rdev);
kfree(rdev->bios);
bdev->man[bo->mem.mem_type].gpu_offset;
bo->cur_placement = bo->mem.placement;
spin_unlock(&bo->lock);
- }
+ } else
+ bo->offset = 0;
return 0;
static int ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all)
{
struct ttm_bo_global *glob = bdev->glob;
- struct ttm_buffer_object *entry, *nentry;
- struct list_head *list, *next;
- int ret;
+ struct ttm_buffer_object *entry = NULL;
+ int ret = 0;
spin_lock(&glob->lru_lock);
- list_for_each_safe(list, next, &bdev->ddestroy) {
- entry = list_entry(list, struct ttm_buffer_object, ddestroy);
- nentry = NULL;
+ if (list_empty(&bdev->ddestroy))
+ goto out_unlock;
- /*
- * Protect the next list entry from destruction while we
- * unlock the lru_lock.
- */
+ entry = list_first_entry(&bdev->ddestroy,
+ struct ttm_buffer_object, ddestroy);
+ kref_get(&entry->list_kref);
- if (next != &bdev->ddestroy) {
- nentry = list_entry(next, struct ttm_buffer_object,
- ddestroy);
+ for (;;) {
+ struct ttm_buffer_object *nentry = NULL;
+
+ if (entry->ddestroy.next != &bdev->ddestroy) {
+ nentry = list_first_entry(&entry->ddestroy,
+ struct ttm_buffer_object, ddestroy);
kref_get(&nentry->list_kref);
}
- kref_get(&entry->list_kref);
spin_unlock(&glob->lru_lock);
ret = ttm_bo_cleanup_refs(entry, remove_all);
kref_put(&entry->list_kref, ttm_bo_release_list);
+ entry = nentry;
+
+ if (ret || !entry)
+ goto out;
spin_lock(&glob->lru_lock);
- if (nentry) {
- bool next_onlist = !list_empty(next);
- spin_unlock(&glob->lru_lock);
- kref_put(&nentry->list_kref, ttm_bo_release_list);
- spin_lock(&glob->lru_lock);
- /*
- * Someone might have raced us and removed the
- * next entry from the list. We don't bother restarting
- * list traversal.
- */
-
- if (!next_onlist)
- break;
- }
- if (ret)
+ if (list_empty(&entry->ddestroy))
break;
}
- ret = !list_empty(&bdev->ddestroy);
- spin_unlock(&glob->lru_lock);
+out_unlock:
+ spin_unlock(&glob->lru_lock);
+out:
+ if (entry)
+ kref_put(&entry->list_kref, ttm_bo_release_list);
return ret;
}
ttm_flag_masked(&cur_flags, placement->busy_placement[i],
~TTM_PL_MASK_MEMTYPE);
+
+ if (mem_type == TTM_PL_SYSTEM) {
+ mem->mem_type = mem_type;
+ mem->placement = cur_flags;
+ mem->mm_node = NULL;
+ return 0;
+ }
+
ret = ttm_bo_mem_force_space(bo, mem_type, placement, mem,
interruptible, no_wait);
if (ret == 0 && mem->mm_node) {
* anyone tries to access a ttm page.
*/
+ if (bo->bdev->driver->swap_notify)
+ bo->bdev->driver->swap_notify(bo);
+
ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
out:
while (ttm_bo_swapout(&bdev->glob->shrink) == 0)
;
}
+EXPORT_SYMBOL(ttm_bo_swapout_all);
wake_up_all(&lock->queue);
spin_unlock(&lock->lock);
}
+EXPORT_SYMBOL(ttm_suspend_unlock);
static bool __ttm_suspend_lock(struct ttm_lock *lock)
{
{
wait_event(lock->queue, __ttm_suspend_lock(lock));
}
+EXPORT_SYMBOL(ttm_suspend_lock);
.busy_placement = &vram_placement_flags
};
+struct ttm_placement vmw_vram_sys_placement = {
+ .fpfn = 0,
+ .lpfn = 0,
+ .num_placement = 1,
+ .placement = &vram_placement_flags,
+ .num_busy_placement = 1,
+ .busy_placement = &sys_placement_flags
+};
+
struct ttm_placement vmw_vram_ne_placement = {
.fpfn = 0,
.lpfn = 0,
return 0;
}
+static void vmw_move_notify(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *new_mem)
+{
+ if (new_mem->mem_type != TTM_PL_SYSTEM)
+ vmw_dmabuf_gmr_unbind(bo);
+}
+
+static void vmw_swap_notify(struct ttm_buffer_object *bo)
+{
+ vmw_dmabuf_gmr_unbind(bo);
+}
+
/**
* FIXME: We're using the old vmware polling method to sync.
* Do this with fences instead.
.sync_obj_wait = vmw_sync_obj_wait,
.sync_obj_flush = vmw_sync_obj_flush,
.sync_obj_unref = vmw_sync_obj_unref,
- .sync_obj_ref = vmw_sync_obj_ref
+ .sync_obj_ref = vmw_sync_obj_ref,
+ .move_notify = vmw_move_notify,
+ .swap_notify = vmw_swap_notify
};
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
+static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
+ void *ptr);
static void vmw_print_capabilities(uint32_t capabilities)
{
dev_priv->dev = dev;
dev_priv->vmw_chipset = chipset;
+ dev_priv->last_read_sequence = (uint32_t) -100;
mutex_init(&dev_priv->hw_mutex);
mutex_init(&dev_priv->cmdbuf_mutex);
rwlock_init(&dev_priv->resource_lock);
vmw_fb_init(dev_priv);
}
+ dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
+ register_pm_notifier(&dev_priv->pm_nb);
+
return 0;
out_no_device:
DRM_INFO(VMWGFX_DRIVER_NAME " unload.\n");
+ unregister_pm_notifier(&dev_priv->pm_nb);
+
if (!dev_priv->stealth) {
vmw_fb_close(dev_priv);
vmw_kms_close(dev_priv);
drm_put_dev(dev);
}
+static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
+ void *ptr)
+{
+ struct vmw_private *dev_priv =
+ container_of(nb, struct vmw_private, pm_nb);
+ struct vmw_master *vmaster = dev_priv->active_master;
+
+ switch (val) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ ttm_suspend_lock(&vmaster->lock);
+
+ /**
+ * This empties VRAM and unbinds all GMR bindings.
+ * Buffer contents is moved to swappable memory.
+ */
+ ttm_bo_swapout_all(&dev_priv->bdev);
+ break;
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ ttm_suspend_unlock(&vmaster->lock);
+ break;
+ case PM_RESTORE_PREPARE:
+ break;
+ case PM_POST_RESTORE:
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+/**
+ * These might not be needed with the virtual SVGA device.
+ */
+
+int vmw_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ return 0;
+}
+
+int vmw_pci_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ return pci_enable_device(pdev);
+}
+
static struct drm_driver driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
DRIVER_MODESET,
.name = VMWGFX_DRIVER_NAME,
.id_table = vmw_pci_id_list,
.probe = vmw_probe,
- .remove = vmw_remove
+ .remove = vmw_remove,
+ .suspend = vmw_pci_suspend,
+ .resume = vmw_pci_resume
},
.name = VMWGFX_DRIVER_NAME,
.desc = VMWGFX_DRIVER_DESC,
#include "drmP.h"
#include "vmwgfx_drm.h"
#include "drm_hashtab.h"
+#include "linux/suspend.h"
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_object.h"
#include "ttm/ttm_lock.h"
struct vmw_master *active_master;
struct vmw_master fbdev_master;
+ struct notifier_block pm_nb;
};
static inline struct vmw_private *vmw_priv(struct drm_device *dev)
struct vmw_dma_buffer *bo);
extern int vmw_dmabuf_from_vram(struct vmw_private *vmw_priv,
struct vmw_dma_buffer *bo);
+extern void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo);
extern int vmw_stream_claim_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int vmw_stream_unref_ioctl(struct drm_device *dev, void *data,
extern struct ttm_placement vmw_vram_placement;
extern struct ttm_placement vmw_vram_ne_placement;
+extern struct ttm_placement vmw_vram_sys_placement;
extern struct ttm_placement vmw_sys_placement;
extern struct ttm_bo_driver vmw_bo_driver;
extern int vmw_dma_quiescent(struct drm_device *dev);
{
int ret;
+ if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL)
+ return 0;
+
+ /**
+ * Put BO in VRAM, only if there is space.
+ */
+
+ ret = ttm_bo_validate(bo, &vmw_vram_sys_placement, true, false);
+ if (unlikely(ret == -ERESTARTSYS))
+ return ret;
+
+ /**
+ * Otherwise, set it up as GMR.
+ */
+
if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL)
return 0;
if (likely(ret == 0 || ret == -ERESTARTSYS))
return ret;
+ /**
+ * If that failed, try VRAM again, this time evicting
+ * previous contents.
+ */
ret = ttm_bo_validate(bo, &vmw_vram_placement, true, false);
return ret;
if (unlikely(ret != 0))
goto err_unlock;
- if (vmw_bo->gmr_bound) {
- vmw_gmr_unbind(vmw_priv, vmw_bo->gmr_id);
- spin_lock(&bo->glob->lru_lock);
- ida_remove(&vmw_priv->gmr_ida, vmw_bo->gmr_id);
- spin_unlock(&bo->glob->lru_lock);
- vmw_bo->gmr_bound = NULL;
- }
-
ret = ttm_bo_validate(bo, &ne_placement, false, false);
ttm_bo_unreserve(bo);
err_unlock:
(unsigned int) min,
(unsigned int) fifo->capabilities);
- dev_priv->fence_seq = (uint32_t) -100;
- dev_priv->last_read_sequence = (uint32_t) -100;
+ dev_priv->fence_seq = dev_priv->last_read_sequence;
iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
return vmw_fifo_send_fence(dev_priv, &dummy);
} *cmd;
int i, increment = 1;
- if (!num_clips ||
- !(dev_priv->fifo.capabilities &
- SVGA_FIFO_CAP_SCREEN_OBJECT)) {
+ if (!num_clips) {
num_clips = 1;
clips = &norect;
norect.x1 = norect.y1 = 0;
for (i = 0; i < num_clips; i++, clips += increment) {
cmd[i].header = cpu_to_le32(SVGA_CMD_UPDATE);
- cmd[i].body.x = cpu_to_le32(clips[i].x1);
- cmd[i].body.y = cpu_to_le32(clips[i].y1);
- cmd[i].body.width = cpu_to_le32(clips[i].x2 - clips[i].x1);
- cmd[i].body.height = cpu_to_le32(clips[i].y2 - clips[i].y1);
+ cmd[i].body.x = cpu_to_le32(clips->x1);
+ cmd[i].body.y = cpu_to_le32(clips->y1);
+ cmd[i].body.width = cpu_to_le32(clips->x2 - clips->x1);
+ cmd[i].body.height = cpu_to_le32(clips->y2 - clips->y1);
}
vmw_fifo_commit(dev_priv, sizeof(*cmd) * num_clips);
bool pin, bool interruptible)
{
struct ttm_buffer_object *bo = &buf->base;
- struct ttm_bo_global *glob = bo->glob;
struct ttm_placement *overlay_placement = &vmw_vram_placement;
int ret;
if (unlikely(ret != 0))
goto err;
- if (buf->gmr_bound) {
- vmw_gmr_unbind(dev_priv, buf->gmr_id);
- spin_lock(&glob->lru_lock);
- ida_remove(&dev_priv->gmr_ida, buf->gmr_id);
- spin_unlock(&glob->lru_lock);
- buf->gmr_bound = NULL;
- }
-
if (pin)
overlay_placement = &vmw_vram_ne_placement;
if (unlikely(ret != 0))
goto out_err1;
+
+ if (srf->flags & (1 << 9) &&
+ srf->num_sizes == 1 &&
+ srf->sizes[0].width == 64 &&
+ srf->sizes[0].height == 64 &&
+ srf->format == SVGA3D_A8R8G8B8) {
+
+ srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
+ /* clear the image */
+ if (srf->snooper.image) {
+ memset(srf->snooper.image, 0x00, 64 * 64 * 4);
+ } else {
+ DRM_ERROR("Failed to allocate cursor_image\n");
+ ret = -ENOMEM;
+ goto out_err1;
+ }
+ } else {
+ srf->snooper.image = NULL;
+ }
+ srf->snooper.crtc = NULL;
+
user_srf->base.shareable = false;
user_srf->base.tfile = NULL;
return ret;
}
- if (srf->flags & (1 << 9) &&
- srf->num_sizes == 1 &&
- srf->sizes[0].width == 64 &&
- srf->sizes[0].height == 64 &&
- srf->format == SVGA3D_A8R8G8B8) {
-
- srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
- /* clear the image */
- if (srf->snooper.image)
- memset(srf->snooper.image, 0x00, 64 * 64 * 4);
- else
- DRM_ERROR("Failed to allocate cursor_image\n");
-
- } else {
- srf->snooper.image = NULL;
- }
- srf->snooper.crtc = NULL;
-
rep->sid = user_srf->base.hash.key;
if (rep->sid == SVGA3D_INVALID_ID)
DRM_ERROR("Created bad Surface ID.\n");
return bo_user_size + page_array_size;
}
-void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo)
+void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo)
{
struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo);
struct ttm_bo_global *glob = bo->glob;
struct vmw_private *dev_priv =
container_of(bo->bdev, struct vmw_private, bdev);
- ttm_mem_global_free(glob->mem_glob, bo->acc_size);
if (vmw_bo->gmr_bound) {
vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id);
spin_lock(&glob->lru_lock);
ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id);
spin_unlock(&glob->lru_lock);
+ vmw_bo->gmr_bound = false;
}
+}
+
+void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo)
+{
+ struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo);
+ struct ttm_bo_global *glob = bo->glob;
+
+ vmw_dmabuf_gmr_unbind(bo);
+ ttm_mem_global_free(glob->mem_glob, bo->acc_size);
kfree(vmw_bo);
}
static void vmw_user_dmabuf_destroy(struct ttm_buffer_object *bo)
{
struct vmw_user_dma_buffer *vmw_user_bo = vmw_user_dma_buffer(bo);
- struct vmw_dma_buffer *vmw_bo = &vmw_user_bo->dma;
struct ttm_bo_global *glob = bo->glob;
- struct vmw_private *dev_priv =
- container_of(bo->bdev, struct vmw_private, bdev);
+ vmw_dmabuf_gmr_unbind(bo);
ttm_mem_global_free(glob->mem_glob, bo->acc_size);
- if (vmw_bo->gmr_bound) {
- vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id);
- spin_lock(&glob->lru_lock);
- ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id);
- spin_unlock(&glob->lru_lock);
- }
kfree(vmw_user_bo);
}
}
ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, req->size,
- &vmw_vram_placement, true,
+ &vmw_vram_sys_placement, true,
&vmw_user_dmabuf_destroy);
if (unlikely(ret != 0))
return ret;
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+ APPLE_ISO_KEYBOARD },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
+#define USB_VENDOR_ID_ETT 0x0664
+#define USB_DEVICE_ID_TC5UH 0x0309
+
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
*
* 3. 135 byte report descriptor
* Report #4 has an array field with logical range 0..17 instead of 1..14.
+ *
+ * 4. 171 byte report descriptor
+ * Report #3 has an array field with logical range 0..1 instead of 1..3.
*/
+static inline void samsung_dev_trace(struct hid_device *hdev,
+ unsigned int rsize)
+{
+ dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
+ "descriptor\n", rsize);
+}
+
static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
rdesc[177] == 0x75 && rdesc[178] == 0x30 &&
rdesc[179] == 0x95 && rdesc[180] == 0x01 &&
rdesc[182] == 0x40) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 184);
+ samsung_dev_trace(hdev, 184);
rdesc[176] = 0xff;
rdesc[178] = 0x08;
rdesc[180] = 0x06;
} else
if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 &&
rdesc[194] == 0x25 && rdesc[195] == 0x12) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 203);
+ samsung_dev_trace(hdev, 203);
rdesc[193] = 0x1;
rdesc[195] = 0xf;
} else
if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 &&
rdesc[126] == 0x25 && rdesc[127] == 0x11) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 135);
+ samsung_dev_trace(hdev, 135);
rdesc[125] = 0x1;
rdesc[127] = 0xe;
+ } else
+ if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 &&
+ rdesc[162] == 0x25 && rdesc[163] == 0x01) {
+ samsung_dev_trace(hdev, 171);
+ rdesc[161] = 0x1;
+ rdesc[163] = 0x3;
}
}
wdata->butstate = rw;
input_report_key(input, BTN_0, rw & 0x02);
input_report_key(input, BTN_1, rw & 0x01);
+ input_report_key(input, BTN_TOOL_FINGER, 0xf0);
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
input_sync(input);
}
/* Pad */
input->evbit[0] |= BIT(EV_MSC);
input->mscbit[0] |= BIT(MSC_SERIAL);
+ set_bit(BTN_0, input->keybit);
+ set_bit(BTN_1, input->keybit);
+ set_bit(BTN_TOOL_FINGER, input->keybit);
/* Distance, rubber and mouse */
input->absbit[0] |= BIT(ABS_DISTANCE);
config SENSORS_CORETEMP
tristate "Intel Core/Core2/Atom temperature sensor"
- depends on X86 && EXPERIMENTAL
+ depends on X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
sensor inside your CPU. Most of the family 6 CPUs
This driver can also be built as a module. If so, the module
will be called ads7828.
+config SENSORS_AMC6821
+ tristate "Texas Instruments AMC6821"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Texas Instruments
+ AMC6821 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called amc6821.
+
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on I2C && EXPERIMENTAL
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
#define ADT7462_PIN24_SHIFT 6
#define ADT7462_PIN26_VOLT_INPUT 0x08
#define ADT7462_PIN25_VOLT_INPUT 0x20
-#define ADT7462_PIN28_SHIFT 6 /* cfg3 */
+#define ADT7462_PIN28_SHIFT 4 /* cfg3 */
#define ADT7462_PIN28_VOLT 0x5
#define ADT7462_REG_ALARM1 0xB8
--- /dev/null
+/*
+ amc6821.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
+
+ Based on max6650.c:
+ Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+#include <linux/kernel.h> /* Needed for KERN_INFO */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+
+/*
+ * Addresses to scan.
+ */
+
+static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e,
+ 0x4c, 0x4d, 0x4e, I2C_CLIENT_END};
+
+
+
+/*
+ * Insmod parameters
+ */
+
+static int pwminv = 0; /*Inverted PWM output. */
+module_param(pwminv, int, S_IRUGO);
+
+static int init = 1; /*Power-on initialization.*/
+module_param(init, int, S_IRUGO);
+
+
+enum chips { amc6821 };
+
+#define AMC6821_REG_DEV_ID 0x3D
+#define AMC6821_REG_COMP_ID 0x3E
+#define AMC6821_REG_CONF1 0x00
+#define AMC6821_REG_CONF2 0x01
+#define AMC6821_REG_CONF3 0x3F
+#define AMC6821_REG_CONF4 0x04
+#define AMC6821_REG_STAT1 0x02
+#define AMC6821_REG_STAT2 0x03
+#define AMC6821_REG_TDATA_LOW 0x08
+#define AMC6821_REG_TDATA_HI 0x09
+#define AMC6821_REG_LTEMP_HI 0x0A
+#define AMC6821_REG_RTEMP_HI 0x0B
+#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
+#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
+#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
+#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
+#define AMC6821_REG_LTEMP_CRIT 0x1B
+#define AMC6821_REG_RTEMP_CRIT 0x1D
+#define AMC6821_REG_PSV_TEMP 0x1C
+#define AMC6821_REG_DCY 0x22
+#define AMC6821_REG_LTEMP_FAN_CTRL 0x24
+#define AMC6821_REG_RTEMP_FAN_CTRL 0x25
+#define AMC6821_REG_DCY_LOW_TEMP 0x21
+
+#define AMC6821_REG_TACH_LLIMITL 0x10
+#define AMC6821_REG_TACH_LLIMITH 0x11
+#define AMC6821_REG_TACH_HLIMITL 0x12
+#define AMC6821_REG_TACH_HLIMITH 0x13
+
+#define AMC6821_CONF1_START 0x01
+#define AMC6821_CONF1_FAN_INT_EN 0x02
+#define AMC6821_CONF1_FANIE 0x04
+#define AMC6821_CONF1_PWMINV 0x08
+#define AMC6821_CONF1_FAN_FAULT_EN 0x10
+#define AMC6821_CONF1_FDRC0 0x20
+#define AMC6821_CONF1_FDRC1 0x40
+#define AMC6821_CONF1_THERMOVIE 0x80
+
+#define AMC6821_CONF2_PWM_EN 0x01
+#define AMC6821_CONF2_TACH_MODE 0x02
+#define AMC6821_CONF2_TACH_EN 0x04
+#define AMC6821_CONF2_RTFIE 0x08
+#define AMC6821_CONF2_LTOIE 0x10
+#define AMC6821_CONF2_RTOIE 0x20
+#define AMC6821_CONF2_PSVIE 0x40
+#define AMC6821_CONF2_RST 0x80
+
+#define AMC6821_CONF3_THERM_FAN_EN 0x80
+#define AMC6821_CONF3_REV_MASK 0x0F
+
+#define AMC6821_CONF4_OVREN 0x10
+#define AMC6821_CONF4_TACH_FAST 0x20
+#define AMC6821_CONF4_PSPR 0x40
+#define AMC6821_CONF4_MODE 0x80
+
+#define AMC6821_STAT1_RPM_ALARM 0x01
+#define AMC6821_STAT1_FANS 0x02
+#define AMC6821_STAT1_RTH 0x04
+#define AMC6821_STAT1_RTL 0x08
+#define AMC6821_STAT1_R_THERM 0x10
+#define AMC6821_STAT1_RTF 0x20
+#define AMC6821_STAT1_LTH 0x40
+#define AMC6821_STAT1_LTL 0x80
+
+#define AMC6821_STAT2_RTC 0x08
+#define AMC6821_STAT2_LTC 0x10
+#define AMC6821_STAT2_LPSV 0x20
+#define AMC6821_STAT2_L_THERM 0x40
+#define AMC6821_STAT2_THERM_IN 0x80
+
+enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
+ IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
+ IDX_TEMP2_MAX, IDX_TEMP2_CRIT,
+ TEMP_IDX_LEN, };
+
+static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI,
+ AMC6821_REG_LTEMP_LIMIT_MIN,
+ AMC6821_REG_LTEMP_LIMIT_MAX,
+ AMC6821_REG_LTEMP_CRIT,
+ AMC6821_REG_RTEMP_HI,
+ AMC6821_REG_RTEMP_LIMIT_MIN,
+ AMC6821_REG_RTEMP_LIMIT_MAX,
+ AMC6821_REG_RTEMP_CRIT, };
+
+enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX,
+ FAN1_IDX_LEN, };
+
+static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW,
+ AMC6821_REG_TACH_LLIMITL,
+ AMC6821_REG_TACH_HLIMITL, };
+
+
+static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI,
+ AMC6821_REG_TACH_LLIMITH,
+ AMC6821_REG_TACH_HLIMITH, };
+
+static int amc6821_probe(
+ struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int amc6821_detect(
+ struct i2c_client *client,
+ struct i2c_board_info *info);
+static int amc6821_init_client(struct i2c_client *client);
+static int amc6821_remove(struct i2c_client *client);
+static struct amc6821_data *amc6821_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id amc6821_id[] = {
+ { "amc6821", amc6821 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, amc6821_id);
+
+static struct i2c_driver amc6821_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "amc6821",
+ },
+ .probe = amc6821_probe,
+ .remove = amc6821_remove,
+ .id_table = amc6821_id,
+ .detect = amc6821_detect,
+ .address_list = normal_i2c,
+};
+
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct amc6821_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ /* register values */
+ int temp[TEMP_IDX_LEN];
+
+ u16 fan[FAN1_IDX_LEN];
+ u8 fan1_div;
+
+ u8 pwm1;
+ u8 temp1_auto_point_temp[3];
+ u8 temp2_auto_point_temp[3];
+ u8 pwm1_auto_point_pwm[3];
+ u8 pwm1_enable;
+ u8 pwm1_auto_channels_temp;
+
+ u8 stat1;
+ u8 stat2;
+};
+
+
+static ssize_t get_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp[ix] * 1000);
+}
+
+
+
+static ssize_t set_temp(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int ix = to_sensor_dev_attr(attr)->index;
+ long val;
+
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+ val = SENSORS_LIMIT(val / 1000, -128, 127);
+
+ mutex_lock(&data->update_lock);
+ data->temp[ix] = val;
+ if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+
+static ssize_t get_temp_alarm(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+ u8 flag;
+
+ switch (ix) {
+ case IDX_TEMP1_MIN:
+ flag = data->stat1 & AMC6821_STAT1_LTL;
+ break;
+ case IDX_TEMP1_MAX:
+ flag = data->stat1 & AMC6821_STAT1_LTH;
+ break;
+ case IDX_TEMP1_CRIT:
+ flag = data->stat2 & AMC6821_STAT2_LTC;
+ break;
+ case IDX_TEMP2_MIN:
+ flag = data->stat1 & AMC6821_STAT1_RTL;
+ break;
+ case IDX_TEMP2_MAX:
+ flag = data->stat1 & AMC6821_STAT1_RTH;
+ break;
+ case IDX_TEMP2_CRIT:
+ flag = data->stat2 & AMC6821_STAT2_RTC;
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
+ return -EINVAL;
+ }
+ if (flag)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+
+
+
+static ssize_t get_temp2_fault(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ if (data->stat1 & AMC6821_STAT1_RTF)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+static ssize_t get_pwm1(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1);
+}
+
+static ssize_t set_pwm1(
+ struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ data->pwm1 = SENSORS_LIMIT(val , 0, 255);
+ i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t get_pwm1_enable(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1_enable);
+}
+
+static ssize_t set_pwm1_enable(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int config = strict_strtol(buf, 10, &val);
+ if (config)
+ return config;
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return -EIO;
+ }
+
+ switch (val) {
+ case 1:
+ config &= ~AMC6821_CONF1_FDRC0;
+ config &= ~AMC6821_CONF1_FDRC1;
+ break;
+ case 2:
+ config &= ~AMC6821_CONF1_FDRC0;
+ config |= AMC6821_CONF1_FDRC1;
+ break;
+ case 3:
+ config |= AMC6821_CONF1_FDRC0;
+ config |= AMC6821_CONF1_FDRC1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ mutex_lock(&data->update_lock);
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ count = -EIO;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+static ssize_t get_pwm1_auto_channels_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp);
+}
+
+
+static ssize_t get_temp_auto_point_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int ix = to_sensor_dev_attr_2(devattr)->index;
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ struct amc6821_data *data = amc6821_update_device(dev);
+ switch (nr) {
+ case 1:
+ return sprintf(buf, "%d\n",
+ data->temp1_auto_point_temp[ix] * 1000);
+ break;
+ case 2:
+ return sprintf(buf, "%d\n",
+ data->temp2_auto_point_temp[ix] * 1000);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
+ return -EINVAL;
+ }
+}
+
+
+static ssize_t get_pwm1_auto_point_pwm(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int ix = to_sensor_dev_attr(devattr)->index;
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]);
+}
+
+
+static inline ssize_t set_slope_register(struct i2c_client *client,
+ u8 reg,
+ u8 dpwm,
+ u8 *ptemp)
+{
+ int dt;
+ u8 tmp;
+
+ dt = ptemp[2]-ptemp[1];
+ for (tmp = 4; tmp > 0; tmp--) {
+ if (dt * (0x20 >> tmp) >= dpwm)
+ break;
+ }
+ tmp |= (ptemp[1] & 0x7C) << 1;
+ if (i2c_smbus_write_byte_data(client,
+ reg, tmp)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+
+
+static ssize_t set_temp_auto_point_temp(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ u8 *ptemp;
+ u8 reg;
+ int dpwm;
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (nr) {
+ case 1:
+ ptemp = data->temp1_auto_point_temp;
+ reg = AMC6821_REG_LTEMP_FAN_CTRL;
+ break;
+ case 2:
+ ptemp = data->temp2_auto_point_temp;
+ reg = AMC6821_REG_RTEMP_FAN_CTRL;
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
+ return -EINVAL;
+ }
+
+ data->valid = 0;
+ mutex_lock(&data->update_lock);
+ switch (ix) {
+ case 0:
+ ptemp[0] = SENSORS_LIMIT(val / 1000, 0,
+ data->temp1_auto_point_temp[1]);
+ ptemp[0] = SENSORS_LIMIT(ptemp[0], 0,
+ data->temp2_auto_point_temp[1]);
+ ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63);
+ if (i2c_smbus_write_byte_data(
+ client,
+ AMC6821_REG_PSV_TEMP,
+ ptemp[0])) {
+ dev_err(&client->dev,
+ "Register write error, aborting.\n");
+ count = -EIO;
+ }
+ goto EXIT;
+ break;
+ case 1:
+ ptemp[1] = SENSORS_LIMIT(
+ val / 1000,
+ (ptemp[0] & 0x7C) + 4,
+ 124);
+ ptemp[1] &= 0x7C;
+ ptemp[2] = SENSORS_LIMIT(
+ ptemp[2], ptemp[1] + 1,
+ 255);
+ break;
+ case 2:
+ ptemp[2] = SENSORS_LIMIT(
+ val / 1000,
+ ptemp[1]+1,
+ 255);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
+ count = -EINVAL;
+ goto EXIT;
+ }
+ dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
+ if (set_slope_register(client, reg, dpwm, ptemp))
+ count = -EIO;
+
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+static ssize_t set_pwm1_auto_point_pwm(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int dpwm;
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254);
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
+ data->pwm1_auto_point_pwm[1])) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ goto EXIT;
+ }
+ dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
+ if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm,
+ data->temp1_auto_point_temp)) {
+ count = -EIO;
+ goto EXIT;
+ }
+ if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm,
+ data->temp2_auto_point_temp)) {
+ count = -EIO;
+ goto EXIT;
+ }
+
+EXIT:
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t get_fan(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+ if (0 == data->fan[ix])
+ return sprintf(buf, "0");
+ return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix]));
+}
+
+
+
+static ssize_t get_fan1_fault(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ if (data->stat1 & AMC6821_STAT1_FANS)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+
+
+static ssize_t set_fan(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int ix = to_sensor_dev_attr(attr)->index;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+ val = 1 > val ? 0xFFFF : 6000000/val;
+
+ mutex_lock(&data->update_lock);
+ data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF);
+ if (i2c_smbus_write_byte_data(client, fan_reg_low[ix],
+ data->fan[ix] & 0xFF)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ goto EXIT;
+ }
+ if (i2c_smbus_write_byte_data(client,
+ fan_reg_hi[ix], data->fan[ix] >> 8)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ }
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+static ssize_t get_fan1_div(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->fan1_div);
+}
+
+static ssize_t set_fan1_div(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int config = strict_strtol(buf, 10, &val);
+ if (config)
+ return config;
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return -EIO;
+ }
+ mutex_lock(&data->update_lock);
+ switch (val) {
+ case 2:
+ config &= ~AMC6821_CONF4_PSPR;
+ data->fan1_div = 2;
+ break;
+ case 4:
+ config |= AMC6821_CONF4_PSPR;
+ data->fan1_div = 4;
+ break;
+ default:
+ count = -EINVAL;
+ goto EXIT;
+ }
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ count = -EIO;
+ }
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ get_temp, NULL, IDX_TEMP1_INPUT);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_MIN);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_CRIT);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP1_MIN);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP1_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP1_CRIT);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
+ get_temp, NULL, IDX_TEMP2_INPUT);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_MIN);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_MAX);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_CRIT);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO,
+ get_temp2_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP2_MIN);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP2_MAX);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP2_CRIT);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
+ get_fan, set_fan, IDX_FAN1_MIN);
+static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR,
+ get_fan, set_fan, IDX_FAN1_MAX);
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+ get_fan1_div, set_fan1_div, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ get_pwm1_enable, set_pwm1_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO,
+ get_pwm1_auto_point_pwm, NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO,
+ get_pwm1_auto_point_pwm, NULL, 2);
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
+ get_pwm1_auto_channels_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO,
+ get_temp_auto_point_temp, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2);
+
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2);
+
+
+
+static struct attribute *amc6821_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_max.dev_attr.attr,
+ &sensor_dev_attr_fan1_fault.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr,
+ NULL
+};
+
+static struct attribute_group amc6821_attr_grp = {
+ .attrs = amc6821_attrs,
+};
+
+
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int amc6821_detect(
+ struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
+ int dev_id, comp_id;
+
+ dev_dbg(&adapter->dev, "amc6821_detect called.\n");
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_dbg(&adapter->dev,
+ "amc6821: I2C bus doesn't support byte mode, "
+ "skipping.\n");
+ return -ENODEV;
+ }
+
+ dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID);
+ comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID);
+ if (dev_id != 0x21 || comp_id != 0x49) {
+ dev_dbg(&adapter->dev,
+ "amc6821: detection failed at 0x%02x.\n",
+ address);
+ return -ENODEV;
+ }
+
+ /* Bit 7 of the address register is ignored, so we can check the
+ ID registers again */
+ dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID);
+ comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID);
+ if (dev_id != 0x21 || comp_id != 0x49) {
+ dev_dbg(&adapter->dev,
+ "amc6821: detection failed at 0x%02x.\n",
+ address);
+ return -ENODEV;
+ }
+
+ dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address);
+ strlcpy(info->type, "amc6821", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int amc6821_probe(
+ struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct amc6821_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct amc6821_data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&client->dev, "out of memory.\n");
+ return -ENOMEM;
+ }
+
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /*
+ * Initialize the amc6821 chip
+ */
+ err = amc6821_init_client(client);
+ if (err)
+ goto err_free;
+
+ err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp);
+ if (err)
+ goto err_free;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (!IS_ERR(data->hwmon_dev))
+ return 0;
+
+ err = PTR_ERR(data->hwmon_dev);
+ dev_err(&client->dev, "error registering hwmon device.\n");
+ sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
+err_free:
+ kfree(data);
+ return err;
+}
+
+static int amc6821_remove(struct i2c_client *client)
+{
+ struct amc6821_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
+
+ kfree(data);
+
+ return 0;
+}
+
+
+static int amc6821_init_client(struct i2c_client *client)
+{
+ int config;
+ int err = -EIO;
+
+ if (init) {
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ config |= AMC6821_CONF4_MODE;
+
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4,
+ config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ dev_info(&client->dev, "Revision %d\n", config & 0x0f);
+
+ config &= ~AMC6821_CONF3_THERM_FAN_EN;
+
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3,
+ config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ config &= ~AMC6821_CONF2_RTFIE;
+ config &= ~AMC6821_CONF2_LTOIE;
+ config &= ~AMC6821_CONF2_RTOIE;
+ if (i2c_smbus_write_byte_data(client,
+ AMC6821_REG_CONF2, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ config &= ~AMC6821_CONF1_THERMOVIE;
+ config &= ~AMC6821_CONF1_FANIE;
+ config |= AMC6821_CONF1_START;
+ if (pwminv)
+ config |= AMC6821_CONF1_PWMINV;
+ else
+ config &= ~AMC6821_CONF1_PWMINV;
+
+ if (i2c_smbus_write_byte_data(
+ client, AMC6821_REG_CONF1, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+ }
+ return 0;
+}
+
+
+static struct amc6821_data *amc6821_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int timeout = HZ;
+ u8 reg;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + timeout) ||
+ !data->valid) {
+
+ for (i = 0; i < TEMP_IDX_LEN; i++)
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ temp_reg[i]);
+
+ data->stat1 = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_STAT1);
+ data->stat2 = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_STAT2);
+
+ data->pwm1 = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_DCY);
+ for (i = 0; i < FAN1_IDX_LEN; i++) {
+ data->fan[i] = i2c_smbus_read_byte_data(
+ client,
+ fan_reg_low[i]);
+ data->fan[i] += i2c_smbus_read_byte_data(
+ client,
+ fan_reg_hi[i]) << 8;
+ }
+ data->fan1_div = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_CONF4);
+ data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2;
+
+ data->pwm1_auto_point_pwm[0] = 0;
+ data->pwm1_auto_point_pwm[2] = 255;
+ data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_DCY_LOW_TEMP);
+
+ data->temp1_auto_point_temp[0] =
+ i2c_smbus_read_byte_data(client,
+ AMC6821_REG_PSV_TEMP);
+ data->temp2_auto_point_temp[0] =
+ data->temp1_auto_point_temp[0];
+ reg = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_LTEMP_FAN_CTRL);
+ data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1;
+ reg &= 0x07;
+ reg = 0x20 >> reg;
+ if (reg > 0)
+ data->temp1_auto_point_temp[2] =
+ data->temp1_auto_point_temp[1] +
+ (data->pwm1_auto_point_pwm[2] -
+ data->pwm1_auto_point_pwm[1]) / reg;
+ else
+ data->temp1_auto_point_temp[2] = 255;
+
+ reg = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_RTEMP_FAN_CTRL);
+ data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1;
+ reg &= 0x07;
+ reg = 0x20 >> reg;
+ if (reg > 0)
+ data->temp2_auto_point_temp[2] =
+ data->temp2_auto_point_temp[1] +
+ (data->pwm1_auto_point_pwm[2] -
+ data->pwm1_auto_point_pwm[1]) / reg;
+ else
+ data->temp2_auto_point_temp[2] = 255;
+
+ reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+ reg = (reg >> 5) & 0x3;
+ switch (reg) {
+ case 0: /*open loop: software sets pwm1*/
+ data->pwm1_auto_channels_temp = 0;
+ data->pwm1_enable = 1;
+ break;
+ case 2: /*closed loop: remote T (temp2)*/
+ data->pwm1_auto_channels_temp = 2;
+ data->pwm1_enable = 2;
+ break;
+ case 3: /*closed loop: local and remote T (temp2)*/
+ data->pwm1_auto_channels_temp = 3;
+ data->pwm1_enable = 3;
+ break;
+ case 1: /*semi-open loop: software sets rpm, chip controls pwm1,
+ *currently not implemented
+ */
+ data->pwm1_auto_channels_temp = 0;
+ data->pwm1_enable = 0;
+ break;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+
+static int __init amc6821_init(void)
+{
+ return i2c_add_driver(&amc6821_driver);
+}
+
+static void __exit amc6821_exit(void)
+{
+ i2c_del_driver(&amc6821_driver);
+}
+
+module_init(amc6821_init);
+module_exit(amc6821_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>");
+MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver");
* See COPYING in the top level directory of the kernel tree.
*/
+#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/hwmon.h>
#include <linux/list.h>
int temperature_count;
int fan_count;
struct list_head sensor_list;
+
+ struct {
+ struct dentry *root;
+ u32 id;
+ } debugfs;
};
return err;
}
+#ifdef CONFIG_DEBUG_FS
+static int atk_debugfs_gitm_get(void *p, u64 *val)
+{
+ struct atk_data *data = p;
+ union acpi_object *ret;
+ struct atk_acpi_ret_buffer *buf;
+ int err = 0;
+
+ if (!data->read_handle)
+ return -ENODEV;
+
+ if (!data->debugfs.id)
+ return -EINVAL;
+
+ ret = atk_gitm(data, data->debugfs.id);
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ buf = (struct atk_acpi_ret_buffer *)ret->buffer.pointer;
+ if (buf->flags)
+ *val = buf->value;
+ else
+ err = -EIO;
+
+ return err;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(atk_debugfs_gitm,
+ atk_debugfs_gitm_get,
+ NULL,
+ "0x%08llx\n")
+
+static int atk_acpi_print(char *buf, size_t sz, union acpi_object *obj)
+{
+ int ret = 0;
+
+ switch (obj->type) {
+ case ACPI_TYPE_INTEGER:
+ ret = snprintf(buf, sz, "0x%08llx\n", obj->integer.value);
+ break;
+ case ACPI_TYPE_STRING:
+ ret = snprintf(buf, sz, "%s\n", obj->string.pointer);
+ break;
+ }
+
+ return ret;
+}
+
+static void atk_pack_print(char *buf, size_t sz, union acpi_object *pack)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < pack->package.count; i++) {
+ union acpi_object *obj = &pack->package.elements[i];
+
+ ret = atk_acpi_print(buf, sz, obj);
+ if (ret >= sz)
+ break;
+ buf += ret;
+ sz -= ret;
+ }
+}
+
+static int atk_debugfs_ggrp_open(struct inode *inode, struct file *file)
+{
+ struct atk_data *data = inode->i_private;
+ char *buf = NULL;
+ union acpi_object *ret;
+ u8 cls;
+ int i;
+
+ if (!data->enumerate_handle)
+ return -ENODEV;
+ if (!data->debugfs.id)
+ return -EINVAL;
+
+ cls = (data->debugfs.id & 0xff000000) >> 24;
+ ret = atk_ggrp(data, cls);
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ for (i = 0; i < ret->package.count; i++) {
+ union acpi_object *pack = &ret->package.elements[i];
+ union acpi_object *id;
+
+ if (pack->type != ACPI_TYPE_PACKAGE)
+ continue;
+ if (!pack->package.count)
+ continue;
+ id = &pack->package.elements[0];
+ if (id->integer.value == data->debugfs.id) {
+ /* Print the package */
+ buf = kzalloc(512, GFP_KERNEL);
+ if (!buf) {
+ ACPI_FREE(ret);
+ return -ENOMEM;
+ }
+ atk_pack_print(buf, 512, pack);
+ break;
+ }
+ }
+ ACPI_FREE(ret);
+
+ if (!buf)
+ return -EINVAL;
+
+ file->private_data = buf;
+
+ return nonseekable_open(inode, file);
+}
+
+static ssize_t atk_debugfs_ggrp_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ char *str = file->private_data;
+ size_t len = strlen(str);
+
+ return simple_read_from_buffer(buf, count, pos, str, len);
+}
+
+static int atk_debugfs_ggrp_release(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+ return 0;
+}
+
+static const struct file_operations atk_debugfs_ggrp_fops = {
+ .read = atk_debugfs_ggrp_read,
+ .open = atk_debugfs_ggrp_open,
+ .release = atk_debugfs_ggrp_release,
+};
+
+static void atk_debugfs_init(struct atk_data *data)
+{
+ struct dentry *d;
+ struct dentry *f;
+
+ data->debugfs.id = 0;
+
+ d = debugfs_create_dir("asus_atk0110", NULL);
+ if (!d || IS_ERR(d))
+ return;
+
+ f = debugfs_create_x32("id", S_IRUSR | S_IWUSR, d, &data->debugfs.id);
+ if (!f || IS_ERR(f))
+ goto cleanup;
+
+ f = debugfs_create_file("gitm", S_IRUSR, d, data,
+ &atk_debugfs_gitm);
+ if (!f || IS_ERR(f))
+ goto cleanup;
+
+ f = debugfs_create_file("ggrp", S_IRUSR, d, data,
+ &atk_debugfs_ggrp_fops);
+ if (!f || IS_ERR(f))
+ goto cleanup;
+
+ data->debugfs.root = d;
+
+ return;
+cleanup:
+ debugfs_remove_recursive(d);
+}
+
+static void atk_debugfs_cleanup(struct atk_data *data)
+{
+ debugfs_remove_recursive(data->debugfs.root);
+}
+
+#else /* CONFIG_DEBUG_FS */
+
+static void atk_debugfs_init(struct atk_data *data)
+{
+}
+
+static void atk_debugfs_cleanup(struct atk_data *data)
+{
+}
+#endif
+
static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
{
struct device *dev = &data->acpi_dev->dev;
return err;
}
-static int atk_check_old_if(struct atk_data *data)
+static int atk_probe_if(struct atk_data *data)
{
struct device *dev = &data->acpi_dev->dev;
acpi_handle ret;
acpi_status status;
+ int err = 0;
/* RTMP: read temperature */
status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_TMP, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->rtmp_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_OLD_READ_TMP " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->rtmp_handle = ret;
/* RVLT: read voltage */
status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_VLT, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->rvlt_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_OLD_READ_VLT " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->rvlt_handle = ret;
/* RFAN: read fan status */
status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_FAN, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->rfan_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_OLD_READ_FAN " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->rfan_handle = ret;
-
- return 0;
-}
-
-static int atk_check_new_if(struct atk_data *data)
-{
- struct device *dev = &data->acpi_dev->dev;
- acpi_handle ret;
- acpi_status status;
/* Enumeration */
status = acpi_get_handle(data->atk_handle, METHOD_ENUMERATE, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->enumerate_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_ENUMERATE " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->enumerate_handle = ret;
/* De-multiplexer (read) */
status = acpi_get_handle(data->atk_handle, METHOD_READ, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->read_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->read_handle = ret;
/* De-multiplexer (write) */
status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret);
- if (status != AE_OK) {
- dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
+ if (ACPI_SUCCESS(status))
+ data->write_handle = ret;
+ else
+ dev_dbg(dev, "method " METHOD_WRITE " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->write_handle = ret;
- return 0;
+ /* Check for hwmon methods: first check "old" style methods; note that
+ * both may be present: in this case we stick to the old interface;
+ * analysis of multiple DSDTs indicates that when both interfaces
+ * are present the new one (GGRP/GITM) is not functional.
+ */
+ if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle)
+ data->old_interface = true;
+ else if (data->enumerate_handle && data->read_handle &&
+ data->write_handle)
+ data->old_interface = false;
+ else
+ err = -ENODEV;
+
+ return err;
}
static int atk_add(struct acpi_device *device)
&buf, ACPI_TYPE_PACKAGE);
if (ret != AE_OK) {
dev_dbg(&device->dev, "atk: method MBIF not found\n");
- err = -ENODEV;
- goto out;
+ } else {
+ obj = buf.pointer;
+ if (obj->package.count >= 2) {
+ union acpi_object *id = &obj->package.elements[1];
+ if (id->type == ACPI_TYPE_STRING)
+ dev_dbg(&device->dev, "board ID = %s\n",
+ id->string.pointer);
+ }
+ ACPI_FREE(buf.pointer);
}
- obj = buf.pointer;
- if (obj->package.count >= 2 &&
- obj->package.elements[1].type == ACPI_TYPE_STRING) {
- dev_dbg(&device->dev, "board ID = %s\n",
- obj->package.elements[1].string.pointer);
+ err = atk_probe_if(data);
+ if (err) {
+ dev_err(&device->dev, "No usable hwmon interface detected\n");
+ goto out;
}
- ACPI_FREE(buf.pointer);
- /* Check for hwmon methods: first check "old" style methods; note that
- * both may be present: in this case we stick to the old interface;
- * analysis of multiple DSDTs indicates that when both interfaces
- * are present the new one (GGRP/GITM) is not functional.
- */
- err = atk_check_old_if(data);
- if (!err) {
+ if (data->old_interface) {
dev_dbg(&device->dev, "Using old hwmon interface\n");
- data->old_interface = true;
+ err = atk_enumerate_old_hwmon(data);
} else {
- err = atk_check_new_if(data);
- if (err)
- goto out;
-
dev_dbg(&device->dev, "Using new hwmon interface\n");
- data->old_interface = false;
- }
-
- if (data->old_interface)
- err = atk_enumerate_old_hwmon(data);
- else
err = atk_enumerate_new_hwmon(data);
+ }
if (err < 0)
goto out;
if (err == 0) {
if (err)
goto cleanup;
+ atk_debugfs_init(data);
+
device->driver_data = data;
return 0;
cleanup:
device->driver_data = NULL;
+ atk_debugfs_cleanup(data);
+
atk_remove_files(data);
atk_free_sensors(data);
hwmon_device_unregister(data->hwmon_dev);
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
+#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
int usemsr_ee = 1;
int err;
u32 eax, edx;
+ struct pci_dev *host_bridge;
/* Early chips have no MSR for TjMax */
usemsr_ee = 0;
}
- /* Atoms seems to have TjMax at 90C */
+ /* Atom CPUs */
if (c->x86_model == 0x1c) {
usemsr_ee = 0;
- tjmax = 90000;
+
+ host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+
+ if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL
+ && (host_bridge->device == 0xa000 /* NM10 based nettop */
+ || host_bridge->device == 0xa010)) /* NM10 based netbook */
+ tjmax = 100000;
+ else
+ tjmax = 90000;
+
+ pci_dev_put(host_bridge);
}
if ((c->x86_model > 0xe) && (usemsr_ee)) {
static int watchdog_open(struct inode *inode, struct file *filp)
{
struct fschmd_data *pos, *data = NULL;
+ int watchdog_is_open;
/* We get called from drivers/char/misc.c with misc_mtx hold, and we
call misc_register() from fschmd_probe() with watchdog_data_mutex
}
}
/* Note we can never not have found data, so we don't check for this */
- kref_get(&data->kref);
+ watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
+ if (!watchdog_is_open)
+ kref_get(&data->kref);
mutex_unlock(&watchdog_data_mutex);
- if (test_and_set_bit(0, &data->watchdog_is_open))
+ if (watchdog_is_open)
return -EBUSY;
/* Start the watchdog */
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
+/* CPUID function 0x80000001, ebx */
+#define CPUID_PKGTYPE_MASK 0xf0000000
+#define CPUID_PKGTYPE_F 0x00000000
+#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
+
+/* DRAM controller (PCI function 2) */
+#define REG_DCT0_CONFIG_HIGH 0x094
+#define DDR3_MODE 0x00000100
+
+/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
#define HTC_ENABLE 0x00000001
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static bool __devinit has_erratum_319(void)
+static bool __devinit has_erratum_319(struct pci_dev *pdev)
{
+ u32 pkg_type, reg_dram_cfg;
+
+ if (boot_cpu_data.x86 != 0x10)
+ return false;
+
/*
- * Erratum 319: The thermal sensor of older Family 10h processors
- * (B steppings) may be unreliable.
+ * Erratum 319: The thermal sensor of Socket F/AM2+ processors
+ * may be unreliable.
*/
- return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2;
+ pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
+ if (pkg_type == CPUID_PKGTYPE_F)
+ return true;
+ if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
+ return false;
+
+ /* Differentiate between AM2+ (bad) and AM3 (good) */
+ pci_bus_read_config_dword(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
+ REG_DCT0_CONFIG_HIGH, ®_dram_cfg);
+ return !(reg_dram_cfg & DDR3_MODE);
}
static int __devinit k10temp_probe(struct pci_dev *pdev,
{
struct device *hwmon_dev;
u32 reg_caps, reg_htc;
+ int unreliable = has_erratum_319(pdev);
int err;
- if (has_erratum_319() && !force) {
+ if (unreliable && !force) {
dev_err(&pdev->dev,
"unreliable CPU thermal sensor; monitoring disabled\n");
err = -ENODEV;
}
dev_set_drvdata(&pdev->dev, hwmon_dev);
- if (has_erratum_319() && force)
+ if (unreliable && force)
dev_warn(&pdev->dev,
"unreliable CPU thermal sensor; check erratum 319\n");
return 0;
dev_set_drvdata(&pdev->dev, NULL);
}
-static struct pci_device_id k10temp_id_table[] = {
+static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{}
static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static struct pci_device_id k8temp_ids[] = {
+static const struct pci_device_id k8temp_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
{ 0 },
};
return data;
}
-static struct pci_device_id sis5595_pci_ids[] = {
+static const struct pci_device_id sis5595_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
{ 0, }
};
}
/* Restore device to its initial state */
-static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
+static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
{
if ((sio_data->activate & 0x01) == 0) {
superio_enter();
return data;
}
-static struct pci_device_id via686a_pci_ids[] = {
+static const struct pci_device_id via686a_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
{ 0, }
};
.remove = __devexit_p(vt8231_remove),
};
-static struct pci_device_id vt8231_pci_ids[] = {
+static const struct pci_device_id vt8231_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) },
{ 0, }
};
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
- do
+ do {
msleep(1);
- while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+ } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
- do
+ do {
msleep(1);
- while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+ } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
temp = readb(i2c_imx->base + IMX_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
- i2c_imx->stopped = 1;
}
if (cpu_is_mx1()) {
/*
udelay(i2c_imx->disable_delay);
}
- if (!i2c_imx->stopped)
+ if (!i2c_imx->stopped) {
i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ }
/* Disable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
}
res_size = resource_size(res);
+
+ if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
+ ret = -EBUSY;
+ goto fail0;
+ }
+
base = ioremap(res->start, res_size);
if (!base) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -EIO;
- goto fail0;
+ goto fail1;
}
i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
if (!i2c_imx) {
dev_err(&pdev->dev, "can't allocate interface\n");
ret = -ENOMEM;
- goto fail1;
- }
-
- if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
goto fail2;
}
fail4:
clk_put(i2c_imx->clk);
fail3:
- release_mem_region(i2c_imx->res->start, resource_size(res));
-fail2:
kfree(i2c_imx);
-fail1:
+fail2:
iounmap(base);
+fail1:
+ release_mem_region(res->start, resource_size(res));
fail0:
if (pdata && pdata->exit)
pdata->exit(&pdev->dev);
clk_put(i2c_imx->clk);
- release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
iounmap(i2c_imx->base);
+ release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
kfree(i2c_imx);
return 0;
}
unsigned long timeout;
if (irq > -1) {
- ret = wait_event_interruptible_timeout(pca_wait,
+ ret = wait_event_timeout(pca_wait,
pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI, pca_isa_ops.timeout);
} else {
}
static irqreturn_t pca_handler(int this_irq, void *dev_id) {
- wake_up_interruptible(&pca_wait);
+ wake_up(&pca_wait);
return IRQ_HANDLED;
}
unsigned long timeout;
if (i2c->irq) {
- ret = wait_event_interruptible_timeout(i2c->wait,
+ ret = wait_event_timeout(i2c->wait,
i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
& I2C_PCA_CON_SI, i2c->adap.timeout);
} else {
if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
return IRQ_NONE;
- wake_up_interruptible(&i2c->wait);
+ wake_up(&i2c->wait);
return IRQ_HANDLED;
}
else
msleep(1);
- while ((timeout++ < MAX_TIMEOUT) &&
+ while ((++timeout < MAX_TIMEOUT) &&
((temp = inb_p(SMBHSTSTS)) & 0x01))
msleep(1);
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout == MAX_TIMEOUT) {
dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+ } while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout == MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
NULL
};
-const static struct dev_pm_ops i2c_device_pm_ops = {
+static const struct dev_pm_ops i2c_device_pm_ops = {
.suspend = i2c_device_pm_suspend,
.resume = i2c_device_pm_resume,
};
adap->dev.parent);
#endif
+ /* device name is gone after device_unregister */
+ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+
/* clean up the sysfs representation */
init_completion(&adap->dev_released);
device_unregister(&adap->dev);
idr_remove(&i2c_adapter_idr, adap->nr);
mutex_unlock(&core_lock);
- dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
-
/* Clear the device structure in case this adapter is ever going to be
added again */
memset(&adap->dev, 0, sizeof(adap->dev));
-menu "IEEE 1394 (FireWire) support"
- depends on PCI || BROKEN
-
-source "drivers/firewire/Kconfig"
-
config IEEE1394
tristate "Legacy alternative FireWire driver stack"
depends on PCI || BROKEN
is the core support only, you will also need to select a driver for
your IEEE 1394 adapter.
- To compile this driver as a module, say M here: the
- module will be called ieee1394.
+ To compile this driver as a module, say M here: the module will be
+ called ieee1394.
+
+ NOTE:
+ ieee1394 is superseded by the newer firewire-core driver. See
+ http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
+ further information on how to switch to the new FireWire drivers.
config IEEE1394_OHCI1394
tristate "OHCI-1394 controllers"
use one of these chipsets. It should work with any OHCI-1394
compliant card, however.
- To compile this driver as a module, say M here: the
- module will be called ohci1394.
+ To compile this driver as a module, say M here: the module will be
+ called ohci1394.
NOTE:
+ ohci1394 is superseded by the newer firewire-ohci driver. See
+ http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
+ further information on how to switch to the new FireWire drivers.
+
If you want to install firewire-ohci and ohci1394 together, you
should configure them only as modules and blacklist the driver(s)
which you don't want to have auto-loaded. Add either
- blacklist firewire-ohci
- or
blacklist ohci1394
blacklist video1394
blacklist dv1394
+ or
+ blacklist firewire-ohci
to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
depending on your distribution.
Instruments PCILynx chip. Note: this driver is written for revision
2 of this chip and may not work with revision 0.
- To compile this driver as a module, say M here: the
- module will be called pcilynx.
+ To compile this driver as a module, say M here: the module will be
+ called pcilynx.
Only some old and now very rare PCI and CardBus cards and
PowerMacs G3 B&W contain the PCILynx controller. Therefore
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
+ To compile this driver as a module, say M here: the module will be
+ called sbp2.
+
+ NOTE:
+ sbp2 is superseded by the newer firewire-sbp2 driver. See
+ http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
+ further information on how to switch to the new FireWire drivers.
+
config IEEE1394_SBP2_PHYS_DMA
bool "Enable replacement for physical DMA in SBP2"
depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL
The module is called eth1394 although it does not emulate Ethernet.
+ NOTE:
+ eth1394 is superseded by the newer firewire-net driver. See
+ http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
+ further information on how to switch to the new FireWire drivers.
+
config IEEE1394_RAWIO
tristate "raw1394 userspace interface"
depends on IEEE1394
To compile this driver as a module, say M here: the module will be
called raw1394.
+ NOTE:
+ raw1394 is superseded by the newer firewire-core driver. See
+ http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
+ further information on how to switch to the new FireWire drivers.
+
config IEEE1394_VIDEO1394
tristate "video1394 userspace interface"
depends on IEEE1394 && IEEE1394_OHCI1394
To compile this driver as a module, say M here: the module will be
called video1394.
+ NOTE:
+ video1394 is superseded by the newer firewire-core driver. See
+ http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
+ further information on how to switch to the new FireWire drivers.
+
config IEEE1394_DV1394
tristate "dv1394 userspace interface (deprecated)"
depends on IEEE1394 && IEEE1394_OHCI1394
help
The dv1394 driver is unsupported and may be removed from Linux in a
- future release. Its functionality is now provided by raw1394 together
- with libraries such as libiec61883.
+ future release. Its functionality is now provided by either
+ raw1394 or firewire-core together with libraries such as libiec61883.
config IEEE1394_VERBOSEDEBUG
bool "Excessive debugging output"
will quickly result in large amounts of data sent to the system log.
Say Y if you really need the debugging output. Everyone else says N.
-
-endmenu
static int cma_check_linklocal(struct rdma_dev_addr *dev_addr,
struct sockaddr *addr)
{
-#if defined(CONFIG_IPv6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
struct sockaddr_in6 *sin6;
if (addr->sa_family != AF_INET6)
list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
spin_unlock_irqrestore(&ipath_devs_lock, flags);
ret = create_device_files(sb, dd);
- if (ret) {
- deactivate_locked_super(sb);
+ if (ret)
goto bail;
- }
spin_lock_irqsave(&ipath_devs_lock, flags);
}
ind = qp->rq.head & (qp->rq.wqe_cnt - 1);
for (nreq = 0; wr; ++nreq, wr = wr->next) {
- if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.send_cq)) {
+ if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
err = -ENOMEM;
*bad_wr = wr;
goto out;
struct mlx4_ib_dev *dev = to_mdev(pd->device);
struct mlx4_ib_srq *srq;
struct mlx4_wqe_srq_next_seg *next;
+ struct mlx4_wqe_data_seg *scatter;
int desc_size;
int buf_size;
int err;
next = get_wqe(srq, i);
next->next_wqe_index =
cpu_to_be16((i + 1) & (srq->msrq.max - 1));
+
+ for (scatter = (void *) (next + 1);
+ (void *) scatter < (void *) next + desc_size;
+ ++scatter)
+ scatter->lkey = cpu_to_be32(MLX4_INVALID_LKEY);
}
err = mlx4_mtt_init(dev->dev, srq->buf.npages, srq->buf.page_shift,
client->head &= EVDEV_BUFFER_SIZE - 1;
spin_unlock(&client->buffer_lock);
- kill_fasync(&client->fasync, SIGIO, POLL_IN);
+ if (event->type == EV_SYN)
+ kill_fasync(&client->fasync, SIGIO, POLL_IN);
}
/*
return 0;
}
+/*
+ * Only left/right direction should be used (under/over 0x8000) for
+ * forward/reverse motor direction (to keep calculation fast & simple).
+ */
+static u16 ml_calculate_direction(u16 direction, u16 force,
+ u16 new_direction, u16 new_force)
+{
+ if (!force)
+ return new_direction;
+ if (!new_force)
+ return direction;
+ return (((u32)(direction >> 1) * force +
+ (new_direction >> 1) * new_force) /
+ (force + new_force)) << 1;
+}
+
/*
* Combine two effects and apply gain.
*/
static void ml_combine_effects(struct ff_effect *effect,
struct ml_effect_state *state,
- unsigned int gain)
+ int gain)
{
struct ff_effect *new = state->effect;
unsigned int strong, weak, i;
break;
case FF_RUMBLE:
- strong = new->u.rumble.strong_magnitude * gain / 0xffff;
- weak = new->u.rumble.weak_magnitude * gain / 0xffff;
+ strong = (u32)new->u.rumble.strong_magnitude * gain / 0xffff;
+ weak = (u32)new->u.rumble.weak_magnitude * gain / 0xffff;
+
+ if (effect->u.rumble.strong_magnitude + strong)
+ effect->direction = ml_calculate_direction(
+ effect->direction,
+ effect->u.rumble.strong_magnitude,
+ new->direction, strong);
+ else if (effect->u.rumble.weak_magnitude + weak)
+ effect->direction = ml_calculate_direction(
+ effect->direction,
+ effect->u.rumble.weak_magnitude,
+ new->direction, weak);
+ else
+ effect->direction = 0;
effect->u.rumble.strong_magnitude =
min(strong + effect->u.rumble.strong_magnitude,
0xffffU);
/* here we also scale it 0x7fff => 0xffff */
i = i * gain / 0x7fff;
+ if (effect->u.rumble.strong_magnitude + i)
+ effect->direction = ml_calculate_direction(
+ effect->direction,
+ effect->u.rumble.strong_magnitude,
+ new->direction, i);
+ else
+ effect->direction = 0;
effect->u.rumble.strong_magnitude =
min(i + effect->u.rumble.strong_magnitude, 0xffffU);
effect->u.rumble.weak_magnitude =
msecs_to_jiffies(state->effect->replay.length);
state->adj_at = state->play_at;
- ml_schedule_timer(ml);
-
} else {
debug("initiated stop");
__set_bit(FF_EFFECT_ABORTING, &state->flags);
else
__clear_bit(FF_EFFECT_STARTED, &state->flags);
-
- ml_play_effects(ml);
}
+ ml_play_effects(ml);
+
return 0;
}
#include <linux/mutex.h>
#include <linux/rcupdate.h>
#include <linux/smp_lock.h>
+#include "input-compat.h"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("Input core");
ABS_MT_TOOL_TYPE,
ABS_MT_BLOB_ID,
ABS_MT_TRACKING_ID,
+ ABS_MT_PRESSURE,
0
};
static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
return error;
}
+#ifdef CONFIG_COMPAT
+
+static int input_bits_to_string(char *buf, int buf_size,
+ unsigned long bits, bool skip_empty)
+{
+ int len = 0;
+
+ if (INPUT_COMPAT_TEST) {
+ u32 dword = bits >> 32;
+ if (dword || !skip_empty)
+ len += snprintf(buf, buf_size, "%x ", dword);
+
+ dword = bits & 0xffffffffUL;
+ if (dword || !skip_empty || len)
+ len += snprintf(buf + len, max(buf_size - len, 0),
+ "%x", dword);
+ } else {
+ if (bits || !skip_empty)
+ len += snprintf(buf, buf_size, "%lx", bits);
+ }
+
+ return len;
+}
+
+#else /* !CONFIG_COMPAT */
+
+static int input_bits_to_string(char *buf, int buf_size,
+ unsigned long bits, bool skip_empty)
+{
+ return bits || !skip_empty ?
+ snprintf(buf, buf_size, "%lx", bits) : 0;
+}
+
+#endif
#ifdef CONFIG_PROC_FS
unsigned long *bitmap, int max)
{
int i;
-
- for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
- if (bitmap[i])
- break;
+ bool skip_empty = true;
+ char buf[18];
seq_printf(seq, "B: %s=", name);
- for (; i >= 0; i--)
- seq_printf(seq, "%lx%s", bitmap[i], i > 0 ? " " : "");
+
+ for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+ if (input_bits_to_string(buf, sizeof(buf),
+ bitmap[i], skip_empty)) {
+ skip_empty = false;
+ seq_printf(seq, "%s%s", buf, i > 0 ? " " : "");
+ }
+ }
+
+ /*
+ * If no output was produced print a single 0.
+ */
+ if (skip_empty)
+ seq_puts(seq, "0");
+
seq_putc(seq, '\n');
}
{
int i;
int len = 0;
+ bool skip_empty = true;
+
+ for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+ len += input_bits_to_string(buf + len, max(buf_size - len, 0),
+ bitmap[i], skip_empty);
+ if (len) {
+ skip_empty = false;
+ if (i > 0)
+ len += snprintf(buf + len, max(buf_size - len, 0), " ");
+ }
+ }
- for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
- if (bitmap[i])
- break;
-
- for (; i >= 0; i--)
- len += snprintf(buf + len, max(buf_size - len, 0),
- "%lx%s", bitmap[i], i > 0 ? " " : "");
+ /*
+ * If no output was produced print a single 0.
+ */
+ if (len == 0)
+ len = snprintf(buf, buf_size, "%d", 0);
if (add_cr)
len += snprintf(buf + len, max(buf_size - len, 0), "\n");
{ \
struct input_dev *input_dev = to_input_dev(dev); \
int len = input_print_bitmap(buf, PAGE_SIZE, \
- input_dev->bm##bit, ev##_MAX, 1); \
+ input_dev->bm##bit, ev##_MAX, \
+ true); \
return min_t(int, len, PAGE_SIZE); \
} \
static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL)
len = input_print_bitmap(&env->buf[env->buflen - 1],
sizeof(env->buf) - env->buflen,
- bitmap, max, 0);
+ bitmap, max, false);
if (len >= (sizeof(env->buf) - env->buflen))
return -ENOMEM;
}
#ifdef RESET_WORKS
- if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) ||
+ if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) &&
(gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) {
err = -ENODEV;
goto fail2;
return 0;
}
-static void iforce_release(struct input_dev *dev)
+static void iforce_close(struct input_dev *dev)
{
struct iforce *iforce = input_get_drvdata(dev);
int i;
/* Disable force feedback playback */
iforce_send_packet(iforce, FF_CMD_ENABLE, "\001");
+ /* Wait for the command to complete */
+ wait_event_interruptible(iforce->wait,
+ !test_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags));
}
- switch (iforce->bus) {
-#ifdef CONFIG_JOYSTICK_IFORCE_USB
- case IFORCE_USB:
- usb_kill_urb(iforce->irq);
-
- /* The device was unplugged before the file
- * was released */
- if (iforce->usbdev == NULL) {
- iforce_delete_device(iforce);
- kfree(iforce);
- }
- break;
-#endif
- }
-}
-
-void iforce_delete_device(struct iforce *iforce)
-{
switch (iforce->bus) {
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
- iforce_usb_delete(iforce);
+ usb_kill_urb(iforce->irq);
+ usb_kill_urb(iforce->out);
+ usb_kill_urb(iforce->ctrl);
break;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_232
input_dev->name = "Unknown I-Force device";
input_dev->open = iforce_open;
- input_dev->close = iforce_release;
+ input_dev->close = iforce_close;
/*
* On-device memory allocation.
struct iforce *iforce = urb->context;
if (urb->status) {
+ clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
dbg("urb->status %d, exiting", urb->status);
return;
}
return err;
}
-/* Called by iforce_delete() */
-void iforce_usb_delete(struct iforce* iforce)
-{
- usb_kill_urb(iforce->irq);
- usb_kill_urb(iforce->out);
- usb_kill_urb(iforce->ctrl);
-
- usb_free_urb(iforce->irq);
- usb_free_urb(iforce->out);
- usb_free_urb(iforce->ctrl);
-}
-
static void iforce_usb_disconnect(struct usb_interface *intf)
{
struct iforce *iforce = usb_get_intfdata(intf);
- int open = 0; /* FIXME! iforce->dev.handle->open; */
usb_set_intfdata(intf, NULL);
- if (iforce) {
- iforce->usbdev = NULL;
- input_unregister_device(iforce->dev);
- if (!open) {
- iforce_delete_device(iforce);
- kfree(iforce);
- }
- }
+ input_unregister_device(iforce->dev);
+
+ usb_free_urb(iforce->irq);
+ usb_free_urb(iforce->out);
+ usb_free_urb(iforce->ctrl);
+
+ kfree(iforce);
}
static struct usb_device_id iforce_usb_ids [] = {
/* iforce-usb.c */
void iforce_usb_xmit(struct iforce *iforce);
-void iforce_usb_delete(struct iforce *iforce);
/* iforce-main.c */
int iforce_init_device(struct iforce *iforce);
-void iforce_delete_device(struct iforce *iforce);
/* iforce-packets.c */
int iforce_control_playback(struct iforce*, u16 id, unsigned int);
}
exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
__func__, retval);
xpad->odata[6] = 0x00;
xpad->odata[7] = 0x00;
xpad->irq_out->transfer_buffer_length = 8;
- usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
}
return 0;
#define ATKBD_CMD_GETID 0x02f2
#define ATKBD_CMD_SETREP 0x10f3
#define ATKBD_CMD_ENABLE 0x00f4
-#define ATKBD_CMD_RESET_DIS 0x00f5
+#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */
+#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */
#define ATKBD_CMD_SETALL_MBR 0x00fa
#define ATKBD_CMD_RESET_BAT 0x02ff
#define ATKBD_CMD_RESEND 0x00fe
struct delayed_work event_work;
unsigned long event_jiffies;
- struct mutex event_mutex;
unsigned long event_mask;
+
+ /* Serializes reconnect(), attr->set() and event work */
+ struct mutex mutex;
};
/*
{
struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
- mutex_lock(&atkbd->event_mutex);
+ mutex_lock(&atkbd->mutex);
if (!atkbd->enabled) {
/*
atkbd_set_repeat_rate(atkbd);
}
- mutex_unlock(&atkbd->event_mutex);
+ mutex_unlock(&atkbd->mutex);
}
/*
atkbd->event_jiffies = jiffies;
set_bit(event_bit, &atkbd->event_mask);
- wmb();
+ mb();
schedule_delayed_work(&atkbd->event_work, delay);
}
struct atkbd *atkbd = serio_get_drvdata(serio);
atkbd_disable(atkbd);
- ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
+ ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF);
}
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+ sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+
atkbd_disable(atkbd);
- /* make sure we don't have a command in flight */
+ input_unregister_device(atkbd->dev);
+
+ /*
+ * Make sure we don't have a command in flight.
+ * Note that since atkbd->enabled is false event work will keep
+ * rescheduling itself until it gets canceled and will not try
+ * accessing freed input device or serio port.
+ */
cancel_delayed_work_sync(&atkbd->event_work);
- sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
- input_unregister_device(atkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(atkbd);
atkbd->dev = dev;
ps2_init(&atkbd->ps2dev, serio);
INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
- mutex_init(&atkbd->event_mutex);
+ mutex_init(&atkbd->mutex);
switch (serio->id.type) {
{
struct atkbd *atkbd = serio_get_drvdata(serio);
struct serio_driver *drv = serio->drv;
+ int retval = -1;
if (!atkbd || !drv) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
+ mutex_lock(&atkbd->mutex);
+
atkbd_disable(atkbd);
if (atkbd->write) {
if (atkbd_probe(atkbd))
- return -1;
+ goto out;
+
if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
- return -1;
+ goto out;
atkbd_activate(atkbd);
}
atkbd_enable(atkbd);
+ retval = 0;
- return 0;
+ out:
+ mutex_unlock(&atkbd->mutex);
+ return retval;
}
static struct serio_device_id atkbd_serio_ids[] = {
ssize_t (*handler)(struct atkbd *, char *))
{
struct serio *serio = to_serio_port(dev);
- int retval;
-
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &atkbd_drv) {
- retval = -ENODEV;
- goto out;
- }
-
- retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
+ struct atkbd *atkbd = serio_get_drvdata(serio);
-out:
- serio_unpin_driver(serio);
- return retval;
+ return handler(atkbd, buf);
}
static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
ssize_t (*handler)(struct atkbd *, const char *, size_t))
{
struct serio *serio = to_serio_port(dev);
- struct atkbd *atkbd;
+ struct atkbd *atkbd = serio_get_drvdata(serio);
int retval;
- retval = serio_pin_driver(serio);
+ retval = mutex_lock_interruptible(&atkbd->mutex);
if (retval)
return retval;
- if (serio->drv != &atkbd_drv) {
- retval = -ENODEV;
- goto out;
- }
-
- atkbd = serio_get_drvdata(serio);
atkbd_disable(atkbd);
retval = handler(atkbd, buf, count);
atkbd_enable(atkbd);
-out:
- serio_unpin_driver(serio);
+ mutex_unlock(&atkbd->mutex);
+
return retval;
}
struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
int error, i;
+ if (pdata->device_enable) {
+ error = pdata->device_enable(dev);
+ if (error < 0) {
+ dev_dbg(dev, "device enable function failed\n");
+ return error;
+ }
+ }
+
if (!pdata->keymap) {
dev_dbg(dev, "no keymap from pdata\n");
return -EINVAL;
unsigned short *keycodes;
unsigned int row_shift;
+ DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
+
uint32_t last_key_state[MATRIX_MAX_COLS];
struct delayed_work work;
+ spinlock_t lock;
bool scan_pending;
bool stopped;
- spinlock_t lock;
};
/*
matrix_keypad_stop(keypad->input_dev);
- if (device_may_wakeup(&pdev->dev))
- for (i = 0; i < pdata->num_row_gpios; i++)
- enable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+ if (device_may_wakeup(&pdev->dev)) {
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ if (!test_bit(i, keypad->disabled_gpios)) {
+ unsigned int gpio = pdata->row_gpios[i];
+
+ if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
+ __set_bit(i, keypad->disabled_gpios);
+ }
+ }
+ }
return 0;
}
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
- if (device_may_wakeup(&pdev->dev))
- for (i = 0; i < pdata->num_row_gpios; i++)
- disable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+ if (device_may_wakeup(&pdev->dev)) {
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ if (test_and_clear_bit(i, keypad->disabled_gpios)) {
+ unsigned int gpio = pdata->row_gpios[i];
+
+ disable_irq_wake(gpio_to_irq(gpio));
+ }
+ }
+ }
matrix_keypad_start(keypad->input_dev);
u8 reg;
int ret;
-#ifdef CONFIG_LOCKDEP
- /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
- * we don't want and can't tolerate. Although it might be
- * friendlier not to borrow this thread context...
- */
- local_irq_enable();
-#endif
-
/* Read & Clear TWL4030 pending interrupt */
ret = twl4030_kpread(kp, ®, KEYP_ISR1, 1);
*
* NOTE: we assume this host is wired to TWL4040 INT1, not INT2 ...
*/
- error = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp);
+ error = request_threaded_irq(kp->irq, NULL, do_kp_irq,
+ 0, pdev->name, kp);
if (error) {
dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n",
kp->irq);
int err;
u8 value;
-#ifdef CONFIG_LOCKDEP
- /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
- * we don't want and can't tolerate since this is a threaded
- * IRQ and can sleep due to the i2c reads it has to issue.
- * Although it might be friendlier not to borrow this thread
- * context...
- */
- local_irq_enable();
-#endif
-
err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value,
- STS_HW_CONDITIONS);
+ STS_HW_CONDITIONS);
if (!err) {
input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
input_sync(pwr);
pwr->phys = "twl4030_pwrbutton/input0";
pwr->dev.parent = &pdev->dev;
- err = request_irq(irq, powerbutton_irq,
+ err = request_threaded_irq(irq, NULL, powerbutton_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"twl4030_pwrbutton", pwr);
if (err < 0) {
return;
}
- dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
+ dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
"toggle %u mode %u scan 0x%08X\n",
address,
command,
.driver = {
.name = "wistron-bios",
.owner = THIS_MODULE,
-#if CONFIG_PM
+#ifdef CONFIG_PM
.pm = &wistron_pm_ops,
#endif
},
config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
default y
- depends on MOUSE_PS2 && X86
+ depends on MOUSE_PS2 && X86 && DMI
help
Say Y here if you have a Fujitsu B-series Lifebook PS/2
TouchScreen connected to your system.
/* trackpad finger data size, empirically at least ten fingers */
#define SIZEOF_FINGER sizeof(struct tp_finger)
#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
+#define MAX_FINGER_ORIENTATION 16384
/* device-specific parameters */
struct bcm5974_param {
input_set_abs_params(input_dev, ABS_Y,
0, cfg->y.dim, cfg->y.fuzz, 0);
+ /* finger touch area */
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ /* finger approach area */
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ /* finger orientation */
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+ -MAX_FINGER_ORIENTATION,
+ MAX_FINGER_ORIENTATION, 0, 0);
+ /* finger position */
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ cfg->x.devmin, cfg->x.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ cfg->y.devmin, cfg->y.devmax, 0, 0);
+
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
return 0;
}
+static void report_finger_data(struct input_dev *input,
+ const struct bcm5974_config *cfg,
+ const struct tp_finger *f)
+{
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major));
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor));
+ input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major));
+ input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor));
+ input_report_abs(input, ABS_MT_ORIENTATION,
+ MAX_FINGER_ORIENTATION - raw2int(f->orientation));
+ input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x));
+ input_report_abs(input, ABS_MT_POSITION_Y,
+ cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y));
+ input_mt_sync(input);
+}
+
/* report trackpad data as logical trackpad state */
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
const struct tp_finger *f;
struct input_dev *input = dev->input;
- int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int raw_p, raw_w, raw_x, raw_y, raw_n, i;
int ptest, origin, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
/* always track the first finger; when detached, start over */
if (raw_n) {
+
+ /* report raw trackpad data */
+ for (i = 0; i < raw_n; i++)
+ report_finger_data(input, c, &f[i]);
+
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
static int hgpk_register(struct psmouse *psmouse)
{
- struct input_dev *dev = psmouse->dev;
int err;
/* register handlers */
}
static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* FLORA-ie 55mi */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
},
},
+ {
+ /* LifeBook B */
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"),
+ },
+ },
{
/* LifeBook B */
.matches = {
},
},
{ }
-#endif
};
void __init lifebook_module_init(void)
synaptics_hardware = true;
if (max_proto > PSMOUSE_IMEX) {
- if (!set_properties || synaptics_init(psmouse) == 0)
+/*
+ * Try activating protocol, but check if support is enabled first, since
+ * we try detecting Synaptics even when protocol is disabled.
+ */
+ if (synaptics_supported() &&
+ (!set_properties || synaptics_init(psmouse) == 0)) {
return PSMOUSE_SYNAPTICS;
+ }
+
/*
* Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
* Unfortunately Logitech/Genius probes confuse some firmware versions so
max_proto = PSMOUSE_IMEX;
}
-/*
- * Try Finger Sensing Pad
- */
- if (max_proto > PSMOUSE_IMEX) {
- if (fsp_detect(psmouse, set_properties) == 0) {
- if (!set_properties || fsp_init(psmouse) == 0)
- return PSMOUSE_FSP;
-/*
- * Init failed, try basic relative protocols
- */
- max_proto = PSMOUSE_IMEX;
- }
- }
if (max_proto > PSMOUSE_IMEX) {
if (genius_detect(psmouse, set_properties) == 0)
return PSMOUSE_TOUCHKIT_PS2;
}
+/*
+ * Try Finger Sensing Pad. We do it here because its probe upsets
+ * Trackpoint devices (causing TP_READ_ID command to time out).
+ */
+ if (max_proto > PSMOUSE_IMEX) {
+ if (fsp_detect(psmouse, set_properties) == 0) {
+ if (!set_properties || fsp_init(psmouse) == 0)
+ return PSMOUSE_FSP;
+/*
+ * Init failed, try basic relative protocols
+ */
+ max_proto = PSMOUSE_IMEX;
+ }
+ }
+
/*
* Reset to defaults in case the device got confused by extended
* protocol probes. Note that we follow up with full reset because
if (psmouse->cleanup)
psmouse->cleanup(psmouse);
- psmouse_reset(psmouse);
+/*
+ * Reset the mouse to defaults (bare PS/2 protocol).
+ */
+ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
/*
* Some boxes, such as HP nx7400, get terribly confused if mouse
struct serio *serio = to_serio_port(dev);
struct psmouse_attribute *attr = to_psmouse_attr(devattr);
struct psmouse *psmouse;
- int retval;
-
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &psmouse_drv) {
- retval = -ENODEV;
- goto out;
- }
psmouse = serio_get_drvdata(serio);
- retval = attr->show(psmouse, attr->data, buf);
-
-out:
- serio_unpin_driver(serio);
- return retval;
+ return attr->show(psmouse, attr->data, buf);
}
ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr,
struct psmouse *psmouse, *parent = NULL;
int retval;
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &psmouse_drv) {
- retval = -ENODEV;
- goto out_unpin;
- }
-
retval = mutex_lock_interruptible(&psmouse_mutex);
if (retval)
- goto out_unpin;
+ goto out;
psmouse = serio_get_drvdata(serio);
out_unlock:
mutex_unlock(&psmouse_mutex);
- out_unpin:
- serio_unpin_driver(serio);
+ out:
return retval;
}
}
mutex_unlock(&psmouse_mutex);
- serio_unpin_driver(serio);
serio_unregister_child_port(serio);
- serio_pin_driver_uninterruptible(serio);
mutex_lock(&psmouse_mutex);
if (serio->drv != &psmouse_drv) {
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
if (packet[3] & BIT(1))
button_status |= 0x0f; /* wheel up */
if (packet[3] & BIT(2))
- button_status |= BIT(5);/* horizontal left */
+ button_status |= BIT(4);/* horizontal left */
if (packet[3] & BIT(3))
- button_status |= BIT(4);/* horizontal right */
+ button_status |= BIT(5);/* horizontal right */
/* push back to packet queue */
if (button_status != 0)
packet[3] = button_status;
return -1;
}
+bool synaptics_supported(void)
+{
+ return true;
+}
+
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
void __init synaptics_module_init(void)
return -ENOSYS;
}
+bool synaptics_supported(void)
+{
+ return false;
+}
+
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
int synaptics_detect(struct psmouse *psmouse, bool set_properties);
int synaptics_init(struct psmouse *psmouse);
void synaptics_reset(struct psmouse *psmouse);
+bool synaptics_supported(void);
#endif /* _SYNAPTICS_H */
* have turned up in 2007 that also need this again.
*/
static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
+ {
+ /* Acer Aspire 5610 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+ },
+ },
{
/* Acer Aspire 5630 */
.matches = {
mutex_lock(&serio_mutex);
- /*
- * Note that we handle only one event here to give swsusp
- * a chance to freeze kseriod thread. Serio events should
- * be pretty rare so we are not concerned about taking
- * performance hit.
- */
- if ((event = serio_get_event())) {
+ while ((event = serio_get_event())) {
switch (event->type) {
case SERIO_REGISTER_PORT:
static int serio_thread(void *nothing)
{
- set_freezable();
do {
serio_handle_event();
- wait_event_freezable(serio_wait,
+ wait_event_interruptible(serio_wait,
kthread_should_stop() || !list_empty(&serio_event_list));
} while (!kthread_should_stop());
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <linux/spi/ad7879.h>
struct input_dev *input;
struct work_struct work;
struct timer_list timer;
-
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gc;
+#endif
struct mutex mutex;
unsigned disabled:1; /* P: mutex */
u8 median;
u16 x_plate_ohms;
u16 pressure_max;
- u16 gpio_init;
u16 cmd_crtl1;
u16 cmd_crtl2;
u16 cmd_crtl3;
- unsigned gpio:1;
};
static int ad7879_read(bus_device *, u8);
static void ad7879_setup(struct ad7879 *ts)
{
- ts->cmd_crtl3 = AD7879_YPLUS_BIT |
- AD7879_XPLUS_BIT |
- AD7879_Z2_BIT |
- AD7879_Z1_BIT |
- AD7879_TEMPMASK_BIT |
- AD7879_AUXVBATMASK_BIT |
- AD7879_GPIOALERTMASK_BIT;
-
- ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
- AD7879_AVG(ts->averaging) |
- AD7879_MFS(ts->median) |
- AD7879_FCD(ts->first_conversion_delay) |
- ts->gpio_init;
-
- ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
- AD7879_ACQ(ts->acquisition_time) |
- AD7879_TMR(ts->pen_down_acc_interval);
-
ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
-static ssize_t ad7879_gpio_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static struct attribute *ad7879_attributes[] = {
+ &dev_attr_disable.attr,
+ NULL
+};
+
+static const struct attribute_group ad7879_attr_group = {
+ .attrs = ad7879_attributes,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int ad7879_gpio_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
{
- struct ad7879 *ts = dev_get_drvdata(dev);
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+ int err;
- return sprintf(buf, "%u\n", ts->gpio);
+ mutex_lock(&ts->mutex);
+ ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
+ err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ mutex_unlock(&ts->mutex);
+
+ return err;
}
-static ssize_t ad7879_gpio_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int ad7879_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int level)
{
- struct ad7879 *ts = dev_get_drvdata(dev);
- unsigned long val;
- int error;
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+ int err;
- error = strict_strtoul(buf, 10, &val);
- if (error)
- return error;
+ mutex_lock(&ts->mutex);
+ ts->cmd_crtl2 &= ~AD7879_GPIODIR;
+ ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL;
+ if (level)
+ ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+ else
+ ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+ err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ mutex_unlock(&ts->mutex);
+
+ return err;
+}
+
+static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+ u16 val;
mutex_lock(&ts->mutex);
- ts->gpio = !!val;
- error = ad7879_write(ts->bus, AD7879_REG_CTRL2,
- ts->gpio ?
- ts->cmd_crtl2 & ~AD7879_GPIO_DATA :
- ts->cmd_crtl2 | AD7879_GPIO_DATA);
+ val = ad7879_read(ts->bus, AD7879_REG_CTRL2);
mutex_unlock(&ts->mutex);
- return error ? : count;
+ return !!(val & AD7879_GPIO_DATA);
}
-static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store);
+static void ad7879_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct ad7879 *ts = container_of(chip, struct ad7879, gc);
-static struct attribute *ad7879_attributes[] = {
- &dev_attr_disable.attr,
- &dev_attr_gpio.attr,
- NULL
-};
+ mutex_lock(&ts->mutex);
+ if (value)
+ ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+ else
+ ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
-static const struct attribute_group ad7879_attr_group = {
- .attrs = ad7879_attributes,
-};
+ ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ mutex_unlock(&ts->mutex);
+}
+
+static int __devinit ad7879_gpio_add(struct device *dev)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ struct ad7879_platform_data *pdata = dev->platform_data;
+ int ret = 0;
+
+ if (pdata->gpio_export) {
+ ts->gc.direction_input = ad7879_gpio_direction_input;
+ ts->gc.direction_output = ad7879_gpio_direction_output;
+ ts->gc.get = ad7879_gpio_get_value;
+ ts->gc.set = ad7879_gpio_set_value;
+ ts->gc.can_sleep = 1;
+ ts->gc.base = pdata->gpio_base;
+ ts->gc.ngpio = 1;
+ ts->gc.label = "AD7879-GPIO";
+ ts->gc.owner = THIS_MODULE;
+ ts->gc.dev = dev;
+
+ ret = gpiochip_add(&ts->gc);
+ if (ret)
+ dev_err(dev, "failed to register gpio %d\n",
+ ts->gc.base);
+ }
+
+ return ret;
+}
+
+/*
+ * We mark ad7879_gpio_remove inline so there is a chance the code
+ * gets discarded when not needed. We can't do __devinit/__devexit
+ * markup since it is used in both probe and remove methods.
+ */
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ struct ad7879_platform_data *pdata = dev->platform_data;
+ int ret;
+
+ if (pdata->gpio_export) {
+ ret = gpiochip_remove(&ts->gc);
+ if (ret)
+ dev_err(dev, "failed to remove gpio %d\n",
+ ts->gc.base);
+ }
+}
+#else
+static inline int ad7879_gpio_add(struct device *dev)
+{
+ return 0;
+}
+
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+}
+#endif
static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
{
ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
ts->median = pdata->median;
- if (pdata->gpio_output)
- ts->gpio_init = AD7879_GPIO_EN |
- (pdata->gpio_default ? 0 : AD7879_GPIO_DATA);
- else
- ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR;
-
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
input_dev->name = "AD7879 Touchscreen";
goto err_free_mem;
}
+ ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+ AD7879_XPLUS_BIT |
+ AD7879_Z2_BIT |
+ AD7879_Z1_BIT |
+ AD7879_TEMPMASK_BIT |
+ AD7879_AUXVBATMASK_BIT |
+ AD7879_GPIOALERTMASK_BIT;
+
+ ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+ AD7879_AVG(ts->averaging) |
+ AD7879_MFS(ts->median) |
+ AD7879_FCD(ts->first_conversion_delay);
+
+ ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+ AD7879_ACQ(ts->acquisition_time) |
+ AD7879_TMR(ts->pen_down_acc_interval);
+
ad7879_setup(ts);
err = request_irq(bus->irq, ad7879_irq,
if (err)
goto err_free_irq;
- err = input_register_device(input_dev);
+ err = ad7879_gpio_add(&bus->dev);
if (err)
goto err_remove_attr;
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_remove_gpio;
+
dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
revid >> 8, bus->irq);
return 0;
+err_remove_gpio:
+ ad7879_gpio_remove(&bus->dev);
err_remove_attr:
sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
err_free_irq:
static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
{
+ ad7879_gpio_remove(&bus->dev);
ad7879_disable(ts);
sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
free_irq(ts->bus->irq, ts);
hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
int slot_rx, int bank_rx)
{
- if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+ if (slot_tx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
/* disable PCM */
mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
return;
* We assume the Guest has the same number of GDT entries as the
* Host, otherwise we'd have to dynamically allocate the Guest GDT.
*/
- if (num >= ARRAY_SIZE(cpu->arch.gdt))
+ if (num >= ARRAY_SIZE(cpu->arch.gdt)) {
kill_guest(cpu, "too many gdt entries %i", num);
+ return;
+ }
/* Set it up, then fix it. */
cpu->arch.gdt[num].a = lo;
return 0;
}
-static struct of_device_id smu_platform_match[] =
+static const struct of_device_id smu_platform_match[] =
{
{
.type = "smu",
return 0;
}
-static struct of_device_id fcu_match[] =
+static const struct of_device_id fcu_match[] =
{
{
.type = "fcu",
return 0;
}
-static struct of_device_id therm_of_match[] = {{
+static const struct of_device_id therm_of_match[] = {{
.name = "fan",
.compatible = "adm1030"
}, {}
return 0;
}
- if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
- DMWARN("%s: target device %s is misaligned: "
+ if (bdev_stack_limits(limits, bdev, start) < 0)
+ DMWARN("%s: adding target device %s caused an alignment inconsistency: "
"physical_block_size=%u, logical_block_size=%u, "
"alignment_offset=%u, start=%llu",
dm_device_name(ti->table->md), bdevname(bdev, b),
q->limits.physical_block_size,
q->limits.logical_block_size,
q->limits.alignment_offset,
- (unsigned long long) start << 9);
-
+ (unsigned long long) start << SECTOR_SHIFT);
/*
* Check if merge fn is supported.
* for the table.
*/
if (blk_stack_limits(limits, &ti_limits, 0) < 0)
- DMWARN("%s: target device "
+ DMWARN("%s: adding target device "
"(start sect %llu len %llu) "
- "is misaligned",
+ "caused an alignment inconsistency",
dm_device_name(table->md),
(unsigned long long) ti->begin,
(unsigned long long) ti->len);
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
- /*
- * Each target device in the table has a data area that should normally
- * be aligned such that the DM device's alignment_offset is 0.
- * FIXME: Propagate alignment_offsets up the stack and warn of
- * sub-optimal or inconsistent settings.
- */
- limits->alignment_offset = 0;
- limits->misaligned = 0;
-
/*
* Copy table's limits to the DM device's request_queue
*/
if (!atomic_dec_and_lock(&mddev->active, &all_mddevs_lock))
return;
if (!mddev->raid_disks && list_empty(&mddev->disks) &&
- !mddev->hold_active) {
+ mddev->ctime == 0 && !mddev->hold_active) {
+ /* Array is not configured at all, and not held active,
+ * so destroy it */
list_del(&mddev->all_mddevs);
if (mddev->gendisk) {
/* we did a probe so need to clean up.
mddev->barriers_work = 1;
mddev->ok_start_degraded = start_dirty_degraded;
- if (start_readonly)
+ if (start_readonly && mddev->ro == 0)
mddev->ro = 2; /* read-only, but switch on first write */
err = mddev->pers->run(mddev);
set_capacity(disk, mddev->array_sectors);
- /* If there is a partially-recovered drive we need to
- * start recovery here. If we leave it to md_check_recovery,
- * it will remove the drives and not do the right thing
- */
- if (mddev->degraded && !mddev->sync_thread) {
- int spares = 0;
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0 &&
- !test_bit(In_sync, &rdev->flags) &&
- !test_bit(Faulty, &rdev->flags))
- /* complete an interrupted recovery */
- spares++;
- if (spares && mddev->pers->sync_request) {
- mddev->recovery = 0;
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- mddev->sync_thread = md_register_thread(md_do_sync,
- mddev,
- "resync");
- if (!mddev->sync_thread) {
- printk(KERN_ERR "%s: could not start resync"
- " thread...\n",
- mdname(mddev));
- /* leave the spares where they are, it shouldn't hurt */
- mddev->recovery = 0;
- }
- }
- }
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
mddev->minor_version = info->minor_version;
mddev->patch_version = info->patch_version;
mddev->persistent = !info->not_persistent;
+ /* ensure mddev_put doesn't delete this now that there
+ * is some minimal configuration.
+ */
+ mddev->ctime = get_seconds();
return 0;
}
mddev->major_version = MD_MAJOR_VERSION;
mddev->curr_resync = 2;
try_again:
- if (kthread_should_stop()) {
+ if (kthread_should_stop())
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
+
+ if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
goto skip;
- }
for_each_mddev(mddev2, tmp) {
if (mddev2 == mddev)
continue;
*/
-#include <linux/usb/input.h>
+#include <linux/input.h>
#include <media/ir-common.h>
#define IR_TAB_MIN_SIZE 32
}
if (params->mode == V4L2_TUNER_RADIO) {
- priv->tda8290_easy_mode = 0x01; /* Start with MN values */
+ /* Set TDA8295 to FM radio; Start TDA8290 with MN values */
+ priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01;
tuner_dbg("setting to radio FM\n");
} else {
tuner_dbg("setting tda829x to system %s\n", mode);
static int tda8295_probe(struct tuner_i2c_props *i2c_props)
{
#define TDA8295_ID 0x8a
+#define TDA8295C2_ID 0x8b
unsigned char tda8295_id[] = { 0x2f, 0x00 };
/* detect tda8295 */
tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1);
tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1);
- if (tda8295_id[1] == TDA8295_ID) {
+ if ((tda8295_id[1] & 0xfe) == TDA8295_ID) {
if (debug)
- printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n",
- __func__, i2c_adapter_id(i2c_props->adap),
+ printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
+ __func__, (tda8295_id[1] == TDA8295_ID) ?
+ "tda8295c1" : "tda8295c2",
+ i2c_adapter_id(i2c_props->adap),
i2c_props->addr);
return 0;
}
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/pt1/Kconfig"
+comment "Supported Mantis Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/dvb/mantis/Kconfig"
+
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
# Makefile for the kernel multimedia device drivers.
#
-obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/
+obj-y := dvb-core/ \
+ frontends/ \
+ ttpci/ \
+ ttusb-dec/ \
+ ttusb-budget/ \
+ b2c2/ \
+ bt8xx/ \
+ dvb-usb/ \
+ pluto2/ \
+ siano/ \
+ dm1105/ \
+ pt1/ \
+ mantis/
obj-$(CONFIG_DVB_FIREDTV) += firewire/
unsigned long flags;
int su;
- if ((tcode != TCODE_WRITE_QUADLET_REQUEST &&
- tcode != TCODE_WRITE_BLOCK_REQUEST) ||
- offset != CSR_REGISTER_BASE + CSR_FCP_RESPONSE ||
- length == 0 ||
- (((u8 *)payload)[0] & 0xf0) != 0) {
- fw_send_response(card, request, RCODE_TYPE_ERROR);
+ if (length < 2 || (((u8 *)payload)[0] & 0xf0) != 0)
return;
- }
su = ((u8 *)payload)[1] & 0x7;
}
spin_unlock_irqrestore(&node_list_lock, flags);
- if (fdtv) {
+ if (fdtv)
avc_recv(fdtv, payload, length);
- fw_send_response(card, request, RCODE_COMPLETE);
- }
}
static struct fw_address_handler fcp_handler = {
help
A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+config DVB_MB86A16
+ tristate "Fujitsu MB86A16 based"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-S/DSS Direct Conversion reveiver.
+ Say Y when you want to support this frontend.
+
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
help
A DMB-TH tuner module. Say Y when you want to support this frontend.
+config DVB_TDA665x
+ tristate "TDA665x tuner"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+ Say Y when you want to support this chip.
+
+ Currently supported tuners:
+ * Panasonic ENV57H12D5 (ET-50DT)
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o
obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
+obj-$(CONFIG_DVB_TDA665x) += tda665x.o
obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o
obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
obj-$(CONFIG_DVB_ISL6423) += isl6423.o
obj-$(CONFIG_DVB_EC100) += ec100.o
obj-$(CONFIG_DVB_DS3000) += ds3000.o
+obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return CT_SHUTDOWN,
+ return CT_SHUTDOWN;
}
static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
{
u16 usref_qam256; /* default: 0x2a80 */
/* disable i2c repeater - 0:repeater enabled 1:repeater disabled */
- int deny_i2c_rptr:1;
+ unsigned int deny_i2c_rptr:1;
/* spectral inversion - 0:disabled 1:enabled */
- int spectral_inversion:1;
+ unsigned int spectral_inversion:1;
/* use RF AGC loop - 0:disabled 1:enabled */
- int rf_agc_loop:1;
+ unsigned int rf_agc_loop:1;
enum lgdt3305_mpeg_mode mpeg_mode;
enum lgdt3305_tp_clock_edge tpclk_edge;
--- /dev/null
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "dvb_frontend.h"
+#include "mb86a16.h"
+#include "mb86a16_priv.h"
+
+unsigned int verbose = 5;
+module_param(verbose, int, 0644);
+
+#define ABS(x) ((x) < 0 ? (-x) : (x))
+
+struct mb86a16_state {
+ struct i2c_adapter *i2c_adap;
+ const struct mb86a16_config *config;
+ struct dvb_frontend frontend;
+
+ /* tuning parameters */
+ int frequency;
+ int srate;
+
+ /* Internal stuff */
+ int master_clk;
+ int deci;
+ int csel;
+ int rsel;
+};
+
+#define MB86A16_ERROR 0
+#define MB86A16_NOTICE 1
+#define MB86A16_INFO 2
+#define MB86A16_DEBUG 3
+
+#define dprintk(x, y, z, format, arg...) do { \
+ if (z) { \
+ if ((x > MB86A16_ERROR) && (x > y)) \
+ printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_NOTICE) && (x > y)) \
+ printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_INFO) && (x > y)) \
+ printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_DEBUG) && (x > y)) \
+ printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \
+ } else { \
+ if (x > y) \
+ printk(format, ##arg); \
+ } \
+} while (0)
+
+#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()")
+#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->")
+
+static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val)
+{
+ int ret;
+ u8 buf[] = { reg, val };
+
+ struct i2c_msg msg = {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = buf,
+ .len = 2
+ };
+
+ dprintk(verbose, MB86A16_DEBUG, 1,
+ "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]",
+ state->config->demod_address, buf[0], buf[1]);
+
+ ret = i2c_transfer(state->i2c_adap, &msg, 1);
+
+ return (ret != 1) ? -EREMOTEIO : 0;
+}
+
+static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+
+ struct i2c_msg msg[] = {
+ {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = b0,
+ .len = 1
+ }, {
+ .addr = state->config->demod_address,
+ .flags = I2C_M_RD,
+ .buf = b1,
+ .len = 1
+ }
+ };
+ ret = i2c_transfer(state->i2c_adap, msg, 2);
+ if (ret != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)",
+ reg, ret);
+
+ return -EREMOTEIO;
+ }
+ *val = b1[0];
+
+ return ret;
+}
+
+static int CNTM_set(struct mb86a16_state *state,
+ unsigned char timint1,
+ unsigned char timint2,
+ unsigned char cnext)
+{
+ unsigned char val;
+
+ val = (timint1 << 4) | (timint2 << 2) | cnext;
+ if (mb86a16_write(state, MB86A16_CNTMR, val) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int smrt_set(struct mb86a16_state *state, int rate)
+{
+ int tmp ;
+ int m ;
+ unsigned char STOFS0, STOFS1;
+
+ m = 1 << state->deci;
+ tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk;
+
+ STOFS0 = tmp & 0x0ff;
+ STOFS1 = (tmp & 0xf00) >> 8;
+
+ if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) |
+ (state->csel << 1) |
+ state->rsel) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -1;
+}
+
+static int srst(struct mb86a16_state *state)
+{
+ if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+
+}
+
+static int afcex_data_set(struct mb86a16_state *state,
+ unsigned char AFCEX_L,
+ unsigned char AFCEX_H)
+{
+ if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+
+ return -1;
+}
+
+static int afcofs_data_set(struct mb86a16_state *state,
+ unsigned char AFCEX_L,
+ unsigned char AFCEX_H)
+{
+ if (mb86a16_write(state, 0x58, AFCEX_L) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x59, AFCEX_H) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int stlp_set(struct mb86a16_state *state,
+ unsigned char STRAS,
+ unsigned char STRBS)
+{
+ if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA)
+{
+ if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int initial_set(struct mb86a16_state *state)
+{
+ if (stlp_set(state, 5, 7))
+ goto err;
+
+ udelay(100);
+ if (afcex_data_set(state, 0, 0))
+ goto err;
+
+ udelay(100);
+ if (afcofs_data_set(state, 0, 0))
+ goto err;
+
+ udelay(100);
+ if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x2f, 0x21) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x54, 0xff) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int S01T_set(struct mb86a16_state *state,
+ unsigned char s1t,
+ unsigned s0t)
+{
+ if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+
+static int EN_set(struct mb86a16_state *state,
+ int cren,
+ int afcen)
+{
+ unsigned char val;
+
+ val = 0x7a | (cren << 7) | (afcen << 2);
+ if (mb86a16_write(state, 0x49, val) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int AFCEXEN_set(struct mb86a16_state *state,
+ int afcexen,
+ int smrt)
+{
+ unsigned char AFCA ;
+
+ if (smrt > 18875)
+ AFCA = 4;
+ else if (smrt > 9375)
+ AFCA = 3;
+ else if (smrt > 2250)
+ AFCA = 2;
+ else
+ AFCA = 1;
+
+ if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int DAGC_data_set(struct mb86a16_state *state,
+ unsigned char DAGCA,
+ unsigned char DAGCW)
+{
+ if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static void smrt_info_get(struct mb86a16_state *state, int rate)
+{
+ if (rate >= 37501) {
+ state->deci = 0; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 30001) {
+ state->deci = 0; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 26251) {
+ state->deci = 0; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 22501) {
+ state->deci = 0; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 18751) {
+ state->deci = 1; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 15001) {
+ state->deci = 1; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 13126) {
+ state->deci = 1; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 11251) {
+ state->deci = 1; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 9376) {
+ state->deci = 2; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 7501) {
+ state->deci = 2; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 6563) {
+ state->deci = 2; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 5626) {
+ state->deci = 2; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 4688) {
+ state->deci = 3; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 3751) {
+ state->deci = 3; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 3282) {
+ state->deci = 3; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 2814) {
+ state->deci = 3; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 2344) {
+ state->deci = 4; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 1876) {
+ state->deci = 4; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 1641) {
+ state->deci = 4; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 1407) {
+ state->deci = 4; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 1172) {
+ state->deci = 5; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 939) {
+ state->deci = 5; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 821) {
+ state->deci = 5; state->csel = 1; state->rsel = 0;
+ } else {
+ state->deci = 5; state->csel = 1; state->rsel = 1;
+ }
+
+ if (state->csel == 0)
+ state->master_clk = 92000;
+ else
+ state->master_clk = 61333;
+
+}
+
+static int signal_det(struct mb86a16_state *state,
+ int smrt,
+ unsigned char *SIG)
+{
+
+ int ret ;
+ int smrtd ;
+ int wait_sym ;
+
+ u32 wait_t;
+ unsigned char S[3] ;
+ int i ;
+
+ if (*SIG > 45) {
+ if (CNTM_set(state, 2, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+ wait_sym = 40000;
+ } else {
+ if (CNTM_set(state, 3, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+ wait_sym = 80000;
+ }
+ for (i = 0; i < 3; i++) {
+ if (i == 0)
+ smrtd = smrt * 98 / 100;
+ else if (i == 1)
+ smrtd = smrt;
+ else
+ smrtd = smrt * 102 / 100;
+ smrt_info_get(state, smrtd);
+ smrt_set(state, smrtd);
+ srst(state);
+ wait_t = (wait_sym + 99 * smrtd / 100) / smrtd;
+ if (wait_t == 0)
+ wait_t = 1;
+ msleep_interruptible(10);
+ if (mb86a16_read(state, 0x37, &(S[i])) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+ }
+ if ((S[1] > S[0] * 112 / 100) &&
+ (S[1] > S[2] * 112 / 100)) {
+
+ ret = 1;
+ } else {
+ ret = 0;
+ }
+ *SIG = S[1];
+
+ if (CNTM_set(state, 0, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+
+ return ret;
+}
+
+static int rf_val_set(struct mb86a16_state *state,
+ int f,
+ int smrt,
+ unsigned char R)
+{
+ unsigned char C, F, B;
+ int M;
+ unsigned char rf_val[5];
+ int ack = -1;
+
+ if (smrt > 37750)
+ C = 1;
+ else if (smrt > 18875)
+ C = 2;
+ else if (smrt > 5500)
+ C = 3;
+ else
+ C = 4;
+
+ if (smrt > 30500)
+ F = 3;
+ else if (smrt > 9375)
+ F = 1;
+ else if (smrt > 4625)
+ F = 0;
+ else
+ F = 2;
+
+ if (f < 1060)
+ B = 0;
+ else if (f < 1175)
+ B = 1;
+ else if (f < 1305)
+ B = 2;
+ else if (f < 1435)
+ B = 3;
+ else if (f < 1570)
+ B = 4;
+ else if (f < 1715)
+ B = 5;
+ else if (f < 1845)
+ B = 6;
+ else if (f < 1980)
+ B = 7;
+ else if (f < 2080)
+ B = 8;
+ else
+ B = 9;
+
+ M = f * (1 << R) / 2;
+
+ rf_val[0] = 0x01 | (C << 3) | (F << 1);
+ rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12);
+ rf_val[2] = (M & 0x00ff0) >> 4;
+ rf_val[3] = ((M & 0x0000f) << 4) | B;
+
+ /* Frequency Set */
+ if (mb86a16_write(state, 0x21, rf_val[0]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x22, rf_val[1]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x23, rf_val[2]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x24, rf_val[3]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x25, 0x01) < 0)
+ ack = 0;
+ if (ack == 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int afcerr_chk(struct mb86a16_state *state)
+{
+ unsigned char AFCM_L, AFCM_H ;
+ int AFCM ;
+ int afcm, afcerr ;
+
+ if (mb86a16_read(state, 0x0e, &AFCM_L) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x0f, &AFCM_H) != 2)
+ goto err;
+
+ AFCM = (AFCM_H << 8) + AFCM_L;
+
+ if (AFCM > 2048)
+ afcm = AFCM - 4096;
+ else
+ afcm = AFCM;
+ afcerr = afcm * state->master_clk / 8192;
+
+ return afcerr;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int dagcm_val_get(struct mb86a16_state *state)
+{
+ int DAGCM;
+ unsigned char DAGCM_H, DAGCM_L;
+
+ if (mb86a16_read(state, 0x45, &DAGCM_L) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x46, &DAGCM_H) != 2)
+ goto err;
+
+ DAGCM = (DAGCM_H << 8) + DAGCM_L;
+
+ return DAGCM;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ u8 stat, stat2;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *status = 0;
+
+ if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2)
+ goto err;
+ if ((stat > 25) && (stat2 > 25))
+ *status |= FE_HAS_SIGNAL;
+ if ((stat > 45) && (stat2 > 45))
+ *status |= FE_HAS_CARRIER;
+
+ if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2)
+ goto err;
+
+ if (stat & 0x01)
+ *status |= FE_HAS_SYNC;
+ if (stat & 0x01)
+ *status |= FE_HAS_VITERBI;
+
+ if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2)
+ goto err;
+
+ if ((stat & 0x0f) && (*status & FE_HAS_VITERBI))
+ *status |= FE_HAS_LOCK;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int sync_chk(struct mb86a16_state *state,
+ unsigned char *VIRM)
+{
+ unsigned char val;
+ int sync;
+
+ if (mb86a16_read(state, 0x0d, &val) != 2)
+ goto err;
+
+ dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val);
+ sync = val & 0x01;
+ *VIRM = (val & 0x1c) >> 2;
+
+ return sync;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+
+}
+
+static int freqerr_chk(struct mb86a16_state *state,
+ int fTP,
+ int smrt,
+ int unit)
+{
+ unsigned char CRM, AFCML, AFCMH;
+ unsigned char temp1, temp2, temp3;
+ int crm, afcm, AFCM;
+ int crrerr, afcerr; /* kHz */
+ int frqerr; /* MHz */
+ int afcen, afcexen = 0;
+ int R, M, fOSC, fOSC_OFS;
+
+ if (mb86a16_read(state, 0x43, &CRM) != 2)
+ goto err;
+
+ if (CRM > 127)
+ crm = CRM - 256;
+ else
+ crm = CRM;
+
+ crrerr = smrt * crm / 256;
+ if (mb86a16_read(state, 0x49, &temp1) != 2)
+ goto err;
+
+ afcen = (temp1 & 0x04) >> 2;
+ if (afcen == 0) {
+ if (mb86a16_read(state, 0x2a, &temp1) != 2)
+ goto err;
+ afcexen = (temp1 & 0x20) >> 5;
+ }
+
+ if (afcen == 1) {
+ if (mb86a16_read(state, 0x0e, &AFCML) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x0f, &AFCMH) != 2)
+ goto err;
+ } else if (afcexen == 1) {
+ if (mb86a16_read(state, 0x2b, &AFCML) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x2c, &AFCMH) != 2)
+ goto err;
+ }
+ if ((afcen == 1) || (afcexen == 1)) {
+ smrt_info_get(state, smrt);
+ AFCM = ((AFCMH & 0x01) << 8) + AFCML;
+ if (AFCM > 255)
+ afcm = AFCM - 512;
+ else
+ afcm = AFCM;
+
+ afcerr = afcm * state->master_clk / 8192;
+ } else
+ afcerr = 0;
+
+ if (mb86a16_read(state, 0x22, &temp1) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x23, &temp2) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x24, &temp3) != 2)
+ goto err;
+
+ R = (temp1 & 0xe0) >> 5;
+ M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4);
+ if (R == 0)
+ fOSC = 2 * M;
+ else
+ fOSC = M;
+
+ fOSC_OFS = fOSC - fTP;
+
+ if (unit == 0) { /* MHz */
+ if (crrerr + afcerr + fOSC_OFS * 1000 >= 0)
+ frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000;
+ else
+ frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000;
+ } else { /* kHz */
+ frqerr = crrerr + afcerr + fOSC_OFS * 1000;
+ }
+
+ return frqerr;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt)
+{
+ unsigned char R;
+
+ if (smrt > 9375)
+ R = 0;
+ else
+ R = 1;
+
+ return R;
+}
+
+static void swp_info_get(struct mb86a16_state *state,
+ int fOSC_start,
+ int smrt,
+ int v, int R,
+ int swp_ofs,
+ int *fOSC,
+ int *afcex_freq,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+ int crnt_swp_freq ;
+
+ crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs;
+
+ if (R == 0)
+ *fOSC = (crnt_swp_freq + 1000) / 2000 * 2;
+ else
+ *fOSC = (crnt_swp_freq + 500) / 1000;
+
+ if (*fOSC >= crnt_swp_freq)
+ *afcex_freq = *fOSC * 1000 - crnt_swp_freq;
+ else
+ *afcex_freq = crnt_swp_freq - *fOSC * 1000;
+
+ AFCEX = *afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+
+static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin,
+ int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1)
+{
+ int swp_freq ;
+
+ if ((i % 2 == 1) && (v <= vmax)) {
+ /* positive v (case 1) */
+ if ((v - 1 == vmin) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v - 1) > SIGMIN)) {
+
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ } else if ((v == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v - 1)) &&
+ (*(V + 30 + v) > SIGMIN)) {
+ /* (case 2) */
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else if ((*(V + 30 + v) > 0) &&
+ (*(V + 30 + v - 1) > 0) &&
+ (*(V + 30 + v - 2) > 0) &&
+ (*(V + 30 + v - 3) > 0) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v - 2) > *(V + 30 + v - 3)) &&
+ ((*(V + 30 + v - 1) > SIGMIN) ||
+ (*(V + 30 + v - 2) > SIGMIN))) {
+ /* (case 3) */
+ if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2;
+ *SIG1 = *(V + 30 + v - 2);
+ }
+ } else if ((v == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v - 2) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v - 2)) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v - 2)) &&
+ ((*(V + 30 + v) > SIGMIN) ||
+ (*(V + 30 + v - 1) > SIGMIN))) {
+ /* (case 4) */
+ if (*(V + 30 + v) >= *(V + 30 + v - 1)) {
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ }
+ } else {
+ swp_freq = -1 ;
+ }
+ } else if ((i % 2 == 0) && (v >= vmin)) {
+ /* Negative v (case 1) */
+ if ((*(V + 30 + v) > 0) &&
+ (*(V + 30 + v + 1) > 0) &&
+ (*(V + 30 + v + 2) > 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v + 1) > SIGMIN)) {
+
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else if ((v + 1 == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 1) > SIGMIN)) {
+ /* (case 2) */
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v);
+ } else if ((v == vmin) &&
+ (*(V + 30 + v) > 0) &&
+ (*(V + 30 + v + 1) > 0) &&
+ (*(V + 30 + v + 2) > 0) &&
+ (*(V + 30 + v) > *(V + 30 + v + 1)) &&
+ (*(V + 30 + v) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v) > SIGMIN)) {
+ /* (case 3) */
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else if ((*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 3) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 2) > *(V + 30 + v + 3)) &&
+ ((*(V + 30 + v + 1) > SIGMIN) ||
+ (*(V + 30 + v + 2) > SIGMIN))) {
+ /* (case 4) */
+ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+ *SIG1 = *(V + 30 + v + 2);
+ }
+ } else if ((*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 3) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v) > *(V + 30 + v + 3)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 3)) &&
+ ((*(V + 30 + v) > SIGMIN) ||
+ (*(V + 30 + v + 1) > SIGMIN))) {
+ /* (case 5) */
+ if (*(V + 30 + v) >= *(V + 30 + v + 1)) {
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ }
+ } else if ((v + 2 == vmin) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 2) > *(V + 30 + v)) &&
+ ((*(V + 30 + v + 1) > SIGMIN) ||
+ (*(V + 30 + v + 2) > SIGMIN))) {
+ /* (case 6) */
+ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+ *SIG1 = *(V + 30 + v + 2);
+ }
+ } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) {
+ swp_freq = fOSC * 1000;
+ *SIG1 = *(V + 30 + v);
+ } else
+ swp_freq = -1;
+ } else
+ swp_freq = -1;
+
+ return swp_freq;
+}
+
+static void swp_info_get2(struct mb86a16_state *state,
+ int smrt,
+ int R,
+ int swp_freq,
+ int *afcex_freq,
+ int *fOSC,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+
+ if (R == 0)
+ *fOSC = (swp_freq + 1000) / 2000 * 2;
+ else
+ *fOSC = (swp_freq + 500) / 1000;
+
+ if (*fOSC >= swp_freq)
+ *afcex_freq = *fOSC * 1000 - swp_freq;
+ else
+ *afcex_freq = swp_freq - *fOSC * 1000;
+
+ AFCEX = *afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static void afcex_info_get(struct mb86a16_state *state,
+ int afcex_freq,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+
+ AFCEX = afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static int SEQ_set(struct mb86a16_state *state, unsigned char loop)
+{
+ /* SLOCK0 = 0 */
+ if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV)
+{
+ /* Viterbi Rate, IQ Settings */
+ if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int FEC_srst(struct mb86a16_state *state)
+{
+ if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int S2T_set(struct mb86a16_state *state, unsigned char S2T)
+{
+ if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T)
+{
+ if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+
+static int mb86a16_set_fe(struct mb86a16_state *state)
+{
+ u8 agcval, cnmval;
+
+ int i, j;
+ int fOSC = 0;
+ int fOSC_start = 0;
+ int wait_t;
+ int fcp;
+ int swp_ofs;
+ int V[60];
+ u8 SIG1MIN;
+
+ unsigned char CREN, AFCEN, AFCEXEN;
+ unsigned char SIG1;
+ unsigned char TIMINT1, TIMINT2, TIMEXT;
+ unsigned char S0T, S1T;
+ unsigned char S2T;
+/* unsigned char S2T, S3T; */
+ unsigned char S4T, S5T;
+ unsigned char AFCEX_L, AFCEX_H;
+ unsigned char R;
+ unsigned char VIRM;
+ unsigned char ETH, VIA;
+ unsigned char junk;
+
+ int loop;
+ int ftemp;
+ int v, vmax, vmin;
+ int vmax_his, vmin_his;
+ int swp_freq, prev_swp_freq[20];
+ int prev_freq_num;
+ int signal_dupl;
+ int afcex_freq;
+ int signal;
+ int afcerr;
+ int temp_freq, delta_freq;
+ int dagcm[4];
+ int smrt_d;
+/* int freq_err; */
+ int n;
+ int ret = -1;
+ int sync;
+
+ dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate);
+
+ fcp = 3000;
+ swp_ofs = state->srate / 4;
+
+ for (i = 0; i < 60; i++)
+ V[i] = -1;
+
+ for (i = 0; i < 20; i++)
+ prev_swp_freq[i] = 0;
+
+ SIG1MIN = 25;
+
+ for (n = 0; ((n < 3) && (ret == -1)); n++) {
+ SEQ_set(state, 0);
+ iq_vt_set(state, 0);
+
+ CREN = 0;
+ AFCEN = 0;
+ AFCEXEN = 1;
+ TIMINT1 = 0;
+ TIMINT2 = 1;
+ TIMEXT = 2;
+ S1T = 0;
+ S0T = 0;
+
+ if (initial_set(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "initial set failed");
+ return -1;
+ }
+ if (DAGC_data_set(state, 3, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1; /* (0, 0) */
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1; /* (1, smrt) = (1, symbolrate) */
+ }
+ if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error");
+ return -1; /* (0, 1, 2) */
+ }
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1; /* (0, 0) */
+ }
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error");
+ return -1;
+ }
+
+ R = vco_dev_get(state, state->srate);
+ if (R == 1)
+ fOSC_start = state->frequency;
+
+ else if (R == 0) {
+ if (state->frequency % 2 == 0) {
+ fOSC_start = state->frequency;
+ } else {
+ fOSC_start = state->frequency + 1;
+ if (fOSC_start > 2150)
+ fOSC_start = state->frequency - 1;
+ }
+ }
+ loop = 1;
+ ftemp = fOSC_start * 1000;
+ vmax = 0 ;
+ while (loop == 1) {
+ ftemp = ftemp + swp_ofs;
+ vmax++;
+
+ /* Upper bound */
+ if (ftemp > 2150000) {
+ loop = 0;
+ vmax--;
+ } else {
+ if ((ftemp == 2150000) ||
+ (ftemp - state->frequency * 1000 >= fcp + state->srate / 4))
+ loop = 0;
+ }
+ }
+
+ loop = 1;
+ ftemp = fOSC_start * 1000;
+ vmin = 0 ;
+ while (loop == 1) {
+ ftemp = ftemp - swp_ofs;
+ vmin--;
+
+ /* Lower bound */
+ if (ftemp < 950000) {
+ loop = 0;
+ vmin++;
+ } else {
+ if ((ftemp == 950000) ||
+ (state->frequency * 1000 - ftemp >= fcp + state->srate / 4))
+ loop = 0;
+ }
+ }
+
+ wait_t = (8000 + state->srate / 2) / state->srate;
+ if (wait_t == 0)
+ wait_t = 1;
+
+ i = 0;
+ j = 0;
+ prev_freq_num = 0;
+ loop = 1;
+ signal = 0;
+ vmax_his = 0;
+ vmin_his = 0;
+ v = 0;
+
+ while (loop == 1) {
+ swp_info_get(state, fOSC_start, state->srate,
+ v, R, swp_ofs, &fOSC,
+ &afcex_freq, &AFCEX_L, &AFCEX_H);
+
+ udelay(100);
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ udelay(100);
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ msleep_interruptible(wait_t);
+
+ if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -1;
+ }
+ V[30 + v] = SIG1 ;
+ swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin,
+ SIG1MIN, fOSC, afcex_freq,
+ swp_ofs, &SIG1); /* changed */
+
+ signal_dupl = 0;
+ for (j = 0; j < prev_freq_num; j++) {
+ if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) {
+ signal_dupl = 1;
+ dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j);
+ }
+ }
+ if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
+ dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
+ prev_swp_freq[prev_freq_num] = swp_freq;
+ prev_freq_num++;
+ swp_info_get2(state, state->srate, R, swp_freq,
+ &afcex_freq, &fOSC,
+ &AFCEX_L, &AFCEX_H);
+
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ signal = signal_det(state, state->srate, &SIG1);
+ if (signal == 1) {
+ dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****");
+ loop = 0;
+ } else {
+ dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again...");
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ }
+ }
+ if (v > vmax)
+ vmax_his = 1 ;
+ if (v < vmin)
+ vmin_his = 1 ;
+ i++;
+
+ if ((i % 2 == 1) && (vmax_his == 1))
+ i++;
+ if ((i % 2 == 0) && (vmin_his == 1))
+ i++;
+
+ if (i % 2 == 1)
+ v = (i + 1) / 2;
+ else
+ v = -i / 2;
+
+ if ((vmax_his == 1) && (vmin_his == 1))
+ loop = 0 ;
+ }
+
+ if (signal == 1) {
+ dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check");
+ S1T = 7 ;
+ S0T = 1 ;
+ CREN = 0 ;
+ AFCEN = 1 ;
+ AFCEXEN = 0 ;
+
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1;
+ }
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H);
+ if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ /* delay 4~200 */
+ wait_t = 200000 / state->master_clk + 200000 / state->srate;
+ msleep(wait_t);
+ afcerr = afcerr_chk(state);
+ if (afcerr == -1)
+ return -1;
+
+ swp_freq = fOSC * 1000 + afcerr ;
+ AFCEXEN = 1 ;
+ if (state->srate >= 1500)
+ smrt_d = state->srate / 3;
+ else
+ smrt_d = state->srate / 2;
+ smrt_info_get(state, smrt_d);
+ if (smrt_set(state, smrt_d) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ R = vco_dev_get(state, smrt_d);
+ if (DAGC_data_set(state, 2, 0) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ for (i = 0; i < 3; i++) {
+ temp_freq = swp_freq + (i - 1) * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[i] = dagcm_val_get(state);
+ }
+ if ((dagcm[0] > dagcm[1]) &&
+ (dagcm[0] > dagcm[2]) &&
+ (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) {
+
+ temp_freq = swp_freq - 2 * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[3] = dagcm_val_get(state);
+ if (dagcm[3] > dagcm[1])
+ delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300;
+ else
+ delta_freq = 0;
+ } else if ((dagcm[2] > dagcm[1]) &&
+ (dagcm[2] > dagcm[0]) &&
+ (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) {
+
+ temp_freq = swp_freq + 2 * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[3] = dagcm_val_get(state);
+ if (dagcm[3] > dagcm[1])
+ delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300;
+ else
+ delta_freq = 0 ;
+
+ } else {
+ delta_freq = 0 ;
+ }
+ dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq);
+ swp_freq += delta_freq;
+ dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
+ if (ABS(state->frequency * 1000 - swp_freq) > 3800) {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !");
+ } else {
+
+ S1T = 0;
+ S0T = 3;
+ CREN = 1;
+ AFCEN = 0;
+ AFCEXEN = 1;
+
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1;
+ }
+ if (DAGC_data_set(state, 0, 0) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ R = vco_dev_get(state, state->srate);
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ wait_t = 7 + (10000 + state->srate / 2) / state->srate;
+ if (wait_t == 0)
+ wait_t = 1;
+ msleep_interruptible(wait_t);
+ if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ if (SIG1 > 110) {
+ S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6;
+ wait_t = 7 + (917504 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 105) {
+ S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1048576 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 85) {
+ S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1310720 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 65) {
+ S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1572864 + state->srate / 2) / state->srate;
+ } else {
+ S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (2097152 + state->srate / 2) / state->srate;
+ }
+ wait_t *= 2; /* FOS */
+ S2T_set(state, S2T);
+ S45T_set(state, S4T, S5T);
+ Vi_set(state, ETH, VIA);
+ srst(state);
+ msleep_interruptible(wait_t);
+ sync = sync_chk(state, &VIRM);
+ dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync);
+ if (VIRM) {
+ if (VIRM == 4) {
+ /* 5/6 */
+ if (SIG1 > 110)
+ wait_t = (786432 + state->srate / 2) / state->srate;
+ else
+ wait_t = (1572864 + state->srate / 2) / state->srate;
+ if (state->srate < 5000)
+ /* FIXME ! , should be a long wait ! */
+ msleep_interruptible(wait_t);
+ else
+ msleep_interruptible(wait_t);
+
+ if (sync_chk(state, &junk) == 0) {
+ iq_vt_set(state, 1);
+ FEC_srst(state);
+ }
+ }
+ /* 1/2, 2/3, 3/4, 7/8 */
+ if (SIG1 > 110)
+ wait_t = (786432 + state->srate / 2) / state->srate;
+ else
+ wait_t = (1572864 + state->srate / 2) / state->srate;
+ msleep_interruptible(wait_t);
+ SEQ_set(state, 1);
+ } else {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC");
+ SEQ_set(state, 1);
+ ret = -1;
+ }
+ }
+ } else {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL");
+ ret = -1;
+ }
+
+ sync = sync_chk(state, &junk);
+ if (sync) {
+ dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******");
+ freqerr_chk(state, state->frequency, state->srate, 1);
+ ret = 0;
+ break;
+ }
+ }
+
+ mb86a16_read(state, 0x15, &agcval);
+ mb86a16_read(state, 0x26, &cnmval);
+ dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval);
+
+ return ret;
+}
+
+static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ int i;
+ u8 regs;
+
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+ goto err;
+
+ regs = 0x18;
+
+ if (cmd->msg_len > 5 || cmd->msg_len < 4)
+ return -EINVAL;
+
+ for (i = 0; i < cmd->msg_len; i++) {
+ if (mb86a16_write(state, regs, cmd->msg[i]) < 0)
+ goto err;
+
+ regs++;
+ }
+ i += 0x90;
+
+ msleep_interruptible(10);
+
+ if (mb86a16_write(state, MB86A16_DCC1, i) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ switch (burst) {
+ case SEC_MINI_A:
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_TBEN |
+ MB86A16_DCC1_TBO) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ case SEC_MINI_B:
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_TBEN) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ }
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_CTOE) < 0)
+
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ case SEC_TONE_OFF:
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+ goto err;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ state->frequency = p->frequency / 1000;
+ state->srate = p->u.qpsk.symbol_rate / 1000;
+
+ if (!mb86a16_set_fe(state)) {
+ dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+ return DVBFE_ALGO_SEARCH_SUCCESS;
+ }
+
+ dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!");
+ return DVBFE_ALGO_SEARCH_FAILED;
+}
+
+static void mb86a16_release(struct dvb_frontend *fe)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static int mb86a16_init(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int mb86a16_sleep(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst;
+ u32 timer;
+
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *ber = 0;
+ if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2)
+ goto err;
+ /* BER monitor invalid when BER_EN = 0 */
+ if (ber_mon & 0x04) {
+ /* coarse, fast calculation */
+ *ber = ber_tab & 0x1f;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber);
+ if (ber_mon & 0x01) {
+ /*
+ * BER_SEL = 1, The monitored BER is the estimated
+ * value with a Reed-Solomon decoder error amount at
+ * the deinterleaver output.
+ * monitored BER is expressed as a 20 bit output in total
+ */
+ ber_rst = ber_mon >> 3;
+ *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+ if (ber_rst == 0)
+ timer = 12500000;
+ if (ber_rst == 1)
+ timer = 25000000;
+ if (ber_rst == 2)
+ timer = 50000000;
+ if (ber_rst == 3)
+ timer = 100000000;
+
+ *ber /= timer;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+ } else {
+ /*
+ * BER_SEL = 0, The monitored BER is the estimated
+ * value with a Viterbi decoder error amount at the
+ * QPSK demodulator output.
+ * monitored BER is expressed as a 24 bit output in total
+ */
+ ber_tim = ber_mon >> 1;
+ *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+ if (ber_tim == 0)
+ timer = 16;
+ if (ber_tim == 1)
+ timer = 24;
+
+ *ber /= 2 ^ timer;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+ }
+ }
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ u8 agcm = 0;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *strength = 0;
+ if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ *strength = ((0xff - agcm) * 100) / 256;
+ dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength);
+ *strength = (0xffff - 0xff) + agcm;
+
+ return 0;
+}
+
+struct cnr {
+ u8 cn_reg;
+ u8 cn_val;
+};
+
+static const struct cnr cnr_tab[] = {
+ { 35, 2 },
+ { 40, 3 },
+ { 50, 4 },
+ { 60, 5 },
+ { 70, 6 },
+ { 80, 7 },
+ { 92, 8 },
+ { 103, 9 },
+ { 115, 10 },
+ { 138, 12 },
+ { 162, 15 },
+ { 180, 18 },
+ { 185, 19 },
+ { 189, 20 },
+ { 195, 22 },
+ { 199, 24 },
+ { 201, 25 },
+ { 202, 26 },
+ { 203, 27 },
+ { 205, 28 },
+ { 208, 30 }
+};
+
+static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ int i = 0;
+ int low_tide = 2, high_tide = 30, q_level;
+ u8 cn;
+
+ *snr = 0;
+ if (mb86a16_read(state, 0x26, &cn) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) {
+ if (cn < cnr_tab[i].cn_reg) {
+ *snr = cnr_tab[i].cn_val;
+ break;
+ }
+ }
+ q_level = (*snr * 100) / (high_tide - low_tide);
+ dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level);
+ *snr = (0xffff - 0xff) + *snr;
+
+ return 0;
+}
+
+static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ u8 dist;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+ *ucblocks = dist;
+
+ return 0;
+}
+
+static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe)
+{
+ return DVBFE_ALGO_CUSTOM;
+}
+
+static struct dvb_frontend_ops mb86a16_ops = {
+ .info = {
+ .name = "Fujitsu MB86A16 DVB-S",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 3000,
+ .frequency_tolerance = 0,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .symbol_rate_tolerance = 500,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 | FE_CAN_QPSK |
+ FE_CAN_FEC_AUTO
+ },
+ .release = mb86a16_release,
+
+ .get_frontend_algo = mb86a16_frontend_algo,
+ .search = mb86a16_search,
+ .read_status = mb86a16_read_status,
+ .init = mb86a16_init,
+ .sleep = mb86a16_sleep,
+ .read_status = mb86a16_read_status,
+
+ .read_ber = mb86a16_read_ber,
+ .read_signal_strength = mb86a16_read_signal_strength,
+ .read_snr = mb86a16_read_snr,
+ .read_ucblocks = mb86a16_read_ucblocks,
+
+ .diseqc_send_master_cmd = mb86a16_send_diseqc_msg,
+ .diseqc_send_burst = mb86a16_send_diseqc_burst,
+ .set_tone = mb86a16_set_tone,
+};
+
+struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap)
+{
+ u8 dev_id = 0;
+ struct mb86a16_state *state = NULL;
+
+ state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ state->config = config;
+ state->i2c_adap = i2c_adap;
+
+ mb86a16_read(state, 0x7f, &dev_id);
+ if (dev_id != 0xfe)
+ goto error;
+
+ memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ state->frontend.ops.set_voltage = state->config->set_voltage;
+
+ return &state->frontend;
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(mb86a16_attach);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Manu Abraham");
--- /dev/null
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_H
+#define __MB86A16_H
+
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
+
+struct mb86a16_config {
+ u8 demod_address;
+
+ int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+};
+
+
+
+#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap);
+
+#else
+
+static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap)
+{
+ printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_MB86A16 */
+
+#endif /* __MB86A16_H */
--- /dev/null
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_PRIV_H
+#define __MB86A16_PRIV_H
+
+#define MB86A16_TSOUT 0x00
+#define MB86A16_TSOUT_HIZSEL (0x01 << 5)
+#define MB86A16_TSOUT_HIZCNTI (0x01 << 4)
+#define MB86A16_TSOUT_MODE (0x01 << 3)
+#define MB86A16_TSOUT_ORDER (0x01 << 2)
+#define MB86A16_TSOUT_ERROR (0x01 << 1)
+#define Mb86A16_TSOUT_EDGE (0x01 << 0)
+
+#define MB86A16_FEC 0x01
+#define MB86A16_FEC_FSYNC (0x01 << 5)
+#define MB86A16_FEC_PCKB8 (0x01 << 4)
+#define MB86A16_FEC_DVDS (0x01 << 3)
+#define MB86A16_FEC_EREN (0x01 << 2)
+#define Mb86A16_FEC_RSEN (0x01 << 1)
+#define MB86A16_FEC_DIEN (0x01 << 0)
+
+#define MB86A16_AGC 0x02
+#define MB86A16_AGC_AGMD (0x01 << 6)
+#define MB86A16_AGC_AGCW (0x0f << 2)
+#define MB86A16_AGC_AGCP (0x01 << 1)
+#define MB86A16_AGC_AGCR (0x01 << 0)
+
+#define MB86A16_SRATE1 0x03
+#define MB86A16_SRATE1_DECI (0x07 << 2)
+#define MB86A16_SRATE1_CSEL (0x01 << 1)
+#define MB86A16_SRATE1_RSEL (0x01 << 0)
+
+#define MB86A16_SRATE2 0x04
+#define MB86A16_SRATE2_STOFSL (0xff << 0)
+
+#define MB86A16_SRATE3 0x05
+#define MB86A16_SRATE2_STOFSH (0xff << 0)
+
+#define MB86A16_VITERBI 0x06
+#define MB86A16_FRAMESYNC 0x07
+#define MB86A16_CRLFILTCOEF1 0x08
+#define MB86A16_CRLFILTCOEF2 0x09
+#define MB86A16_STRFILTCOEF1 0x0a
+#define MB86A16_STRFILTCOEF2 0x0b
+#define MB86A16_RESET 0x0c
+#define MB86A16_STATUS 0x0d
+#define MB86A16_AFCML 0x0e
+#define MB86A16_AFCMH 0x0f
+#define MB86A16_BERMON 0x10
+#define MB86A16_BERTAB 0x11
+#define MB86A16_BERLSB 0x12
+#define MB86A16_BERMID 0x13
+#define MB86A16_BERMSB 0x14
+#define MB86A16_AGCM 0x15
+
+#define MB86A16_DCC1 0x16
+#define MB86A16_DCC1_DISTA (0x01 << 7)
+#define MB86A16_DCC1_PRTY (0x01 << 6)
+#define MB86A16_DCC1_CTOE (0x01 << 5)
+#define MB86A16_DCC1_TBEN (0x01 << 4)
+#define MB86A16_DCC1_TBO (0x01 << 3)
+#define MB86A16_DCC1_NUM (0x07 << 0)
+
+#define MB86A16_DCC2 0x17
+#define MB86A16_DCC2_DCBST (0x01 << 0)
+
+#define MB86A16_DCC3 0x18
+#define MB86A16_DCC3_CODE0 (0xff << 0)
+
+#define MB86A16_DCC4 0x19
+#define MB86A16_DCC4_CODE1 (0xff << 0)
+
+#define MB86A16_DCC5 0x1a
+#define MB86A16_DCC5_CODE2 (0xff << 0)
+
+#define MB86A16_DCC6 0x1b
+#define MB86A16_DCC6_CODE3 (0xff << 0)
+
+#define MB86A16_DCC7 0x1c
+#define MB86A16_DCC7_CODE4 (0xff << 0)
+
+#define MB86A16_DCC8 0x1d
+#define MB86A16_DCC8_CODE5 (0xff << 0)
+
+#define MB86A16_DCCOUT 0x1e
+#define MB86A16_DCCOUT_DISEN (0x01 << 0)
+
+#define MB86A16_TONEOUT1 0x1f
+#define MB86A16_TONE_TDIVL (0xff << 0)
+
+#define MB86A16_TONEOUT2 0x20
+#define MB86A16_TONE_TMD (0x03 << 2)
+#define MB86A16_TONE_TDIVH (0x03 << 0)
+
+#define MB86A16_FREQ1 0x21
+#define MB86A16_FREQ2 0x22
+#define MB86A16_FREQ3 0x23
+#define MB86A16_FREQ4 0x24
+#define MB86A16_FREQSET 0x25
+#define MB86A16_CNM 0x26
+#define MB86A16_PORT0 0x27
+#define MB86A16_PORT1 0x28
+#define MB86A16_DRCFILT 0x29
+#define MB86A16_AFC 0x2a
+#define MB86A16_AFCEXL 0x2b
+#define MB86A16_AFCEXH 0x2c
+#define MB86A16_DAGC 0x2d
+#define MB86A16_SEQMODE 0x32
+#define MB86A16_S0S1T 0x33
+#define MB86A16_S2S3T 0x34
+#define MB86A16_S4S5T 0x35
+#define MB86A16_CNTMR 0x36
+#define MB86A16_SIG1 0x37
+#define MB86A16_SIG2 0x38
+#define MB86A16_VIMAG 0x39
+#define MB86A16_VISET1 0x3a
+#define MB86A16_VISET2 0x3b
+#define MB86A16_VISET3 0x3c
+#define MB86A16_FAGCS1 0x3d
+#define MB86A16_FAGCS2 0x3e
+#define MB86A16_FAGCS3 0x3f
+#define MB86A16_FAGCS4 0x40
+#define MB86A16_FAGCS5 0x41
+#define MB86A16_FAGCS6 0x42
+#define MB86A16_CRM 0x43
+#define MB86A16_STRM 0x44
+#define MB86A16_DAGCML 0x45
+#define MB86A16_DAGCMH 0x46
+#define MB86A16_QPSKTST 0x49
+#define MB86A16_DISTMON 0x52
+#define MB86A16_VERSION 0x7f
+
+#endif /* __MB86A16_PRIV_H */
id = tda10021_readreg(state, 0x1a);
if ((id & 0xf0) != 0x70) goto error;
+ /* Don't claim TDA10023 */
+ if (id == 0x7d)
+ goto error;
+
printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
state->config->demod_address, id);
--- /dev/null
+/*
+ TDA665x tuner driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "dvb_frontend.h"
+#include "tda665x.h"
+
+struct tda665x_state {
+ struct dvb_frontend *fe;
+ struct i2c_adapter *i2c;
+ const struct tda665x_config *config;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+static int tda665x_read(struct tda665x_state *state, u8 *buf)
+{
+ const struct tda665x_config *config = state->config;
+ int err = 0;
+ struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 };
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1)
+ goto exit;
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+ return err;
+}
+
+static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length)
+{
+ const struct tda665x_config *config = state->config;
+ int err = 0;
+ struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length };
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1)
+ goto exit;
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+ return err;
+}
+
+static int tda665x_get_state(struct dvb_frontend *fe,
+ enum tuner_param param,
+ struct tuner_state *tstate)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ int err = 0;
+
+ switch (param) {
+ case DVBFE_TUNER_FREQUENCY:
+ tstate->frequency = state->frequency;
+ break;
+ case DVBFE_TUNER_BANDWIDTH:
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static int tda665x_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ u8 result = 0;
+ int err = 0;
+
+ *status = 0;
+
+ err = tda665x_read(state, &result);
+ if (err < 0)
+ goto exit;
+
+ if ((result >> 6) & 0x01) {
+ printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__);
+ *status = 1;
+ }
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error\n", __func__);
+ return err;
+}
+
+static int tda665x_set_state(struct dvb_frontend *fe,
+ enum tuner_param param,
+ struct tuner_state *tstate)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ const struct tda665x_config *config = state->config;
+ u32 frequency, status = 0;
+ u8 buf[4];
+ int err = 0;
+
+ if (param & DVBFE_TUNER_FREQUENCY) {
+
+ frequency = tstate->frequency;
+ if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) {
+ printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
+ return -EINVAL;
+ }
+
+ frequency += config->frequency_offst;
+ frequency *= config->ref_multiplier;
+ frequency += config->ref_divider >> 1;
+ frequency /= config->ref_divider;
+
+ buf[0] = (u8) (frequency & 0x7f00) >> 8;
+ buf[1] = (u8) (frequency & 0x00ff) >> 0;
+ buf[2] = 0x80 | 0x40 | 0x02;
+ buf[3] = 0x00;
+
+ /* restore frequency */
+ frequency = tstate->frequency;
+
+ if (frequency < 153000000) {
+ /* VHF-L */
+ buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
+ if (frequency < 68000000)
+ buf[3] |= 0x40; /* 83uA */
+ if (frequency < 1040000000)
+ buf[3] |= 0x60; /* 122uA */
+ if (frequency < 1250000000)
+ buf[3] |= 0x80; /* 163uA */
+ else
+ buf[3] |= 0xa0; /* 254uA */
+ } else if (frequency < 438000000) {
+ /* VHF-H */
+ buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
+ if (frequency < 230000000)
+ buf[3] |= 0x40;
+ if (frequency < 300000000)
+ buf[3] |= 0x60;
+ else
+ buf[3] |= 0x80;
+ } else {
+ /* UHF */
+ buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
+ if (frequency < 470000000)
+ buf[3] |= 0x60;
+ if (frequency < 526000000)
+ buf[3] |= 0x80;
+ else
+ buf[3] |= 0xa0;
+ }
+
+ /* Set params */
+ err = tda665x_write(state, buf, 5);
+ if (err < 0)
+ goto exit;
+
+ /* sleep for some time */
+ printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
+ msleep(20);
+ /* check status */
+ err = tda665x_get_status(fe, &status);
+ if (err < 0)
+ goto exit;
+
+ if (status == 1) {
+ printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status);
+ state->frequency = frequency; /* cache successful state */
+ } else {
+ printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status);
+ }
+ } else {
+ printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+ return -EINVAL;
+ }
+
+ return 0;
+exit:
+ printk(KERN_ERR "%s: I/O Error\n", __func__);
+ return err;
+}
+
+static int tda665x_release(struct dvb_frontend *fe)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+
+ fe->tuner_priv = NULL;
+ kfree(state);
+ return 0;
+}
+
+static struct dvb_tuner_ops tda665x_ops = {
+
+ .set_state = tda665x_set_state,
+ .get_state = tda665x_get_state,
+ .get_status = tda665x_get_status,
+ .release = tda665x_release
+};
+
+struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct tda665x_state *state = NULL;
+ struct dvb_tuner_info *info;
+
+ state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL);
+ if (state == NULL)
+ goto exit;
+
+ state->config = config;
+ state->i2c = i2c;
+ state->fe = fe;
+ fe->tuner_priv = state;
+ fe->ops.tuner_ops = tda665x_ops;
+ info = &fe->ops.tuner_ops.info;
+
+ memcpy(info->name, config->name, sizeof(config->name));
+ info->frequency_min = config->frequency_min;
+ info->frequency_max = config->frequency_max;
+ info->frequency_step = config->frequency_offst;
+
+ printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name);
+
+ return fe;
+
+exit:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(tda665x_attach);
+
+MODULE_DESCRIPTION("TDA665x driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ TDA665x tuner driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TDA665x_H
+#define __TDA665x_H
+
+struct tda665x_config {
+ char name[128];
+
+ u8 addr;
+ u32 frequency_min;
+ u32 frequency_max;
+ u32 frequency_offst;
+ u32 ref_multiplier;
+ u32 ref_divider;
+};
+
+#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c);
+
+#else
+
+static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_TDA665x */
+
+#endif /* __TDA665x_H */
--- /dev/null
+config MANTIS_CORE
+ tristate "Mantis/Hopper PCI bridge based devices"
+ depends on PCI && I2C && INPUT
+
+ help
+ Support for PCI cards based on the Mantis and Hopper PCi bridge.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_MANTIS
+ tristate "MANTIS based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_MB86A16
+ select DVB_ZL10353
+ select DVB_STV0299
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Mantis PCI bridge.
+ Say Y when you have a Mantis based DVB card and want to use it.
+
+ If unsure say N.
+
+config DVB_HOPPER
+ tristate "HOPPER based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_ZL10353
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Hopper PCI bridge.
+ Say Y when you have a Hopper based DVB card and want to use it.
+
+ If unsure say N
--- /dev/null
+mantis_core-objs := mantis_ioc.o \
+ mantis_uart.o \
+ mantis_dma.o \
+ mantis_pci.o \
+ mantis_i2c.o \
+ mantis_dvb.o \
+ mantis_evm.o \
+ mantis_hif.o \
+ mantis_ca.o \
+ mantis_pcmcia.o \
+ mantis_input.o
+
+mantis-objs := mantis_cards.o \
+ mantis_vp1033.o \
+ mantis_vp1034.o \
+ mantis_vp1041.o \
+ mantis_vp2033.o \
+ mantis_vp2040.o \
+ mantis_vp3030.o
+
+hopper-objs := hopper_cards.o \
+ hopper_vp3028.o
+
+obj-$(CONFIG_MANTIS_CORE) += mantis_core.o
+obj-$(CONFIG_DVB_MANTIS) += mantis.o
+obj-$(CONFIG_DVB_HOPPER) += hopper.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
--- /dev/null
+/*
+ Hopper PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "hopper_vp3028.h"
+#include "mantis_dma.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+#define DRIVER_NAME "Hopper"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static int devs;
+
+static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &hopper_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ devs++;
+
+ return err;
+
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit hopper_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+
+}
+
+static struct pci_device_id hopper_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
+ { }
+};
+
+static struct pci_driver hopper_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = hopper_pci_table,
+ .probe = hopper_pci_probe,
+ .remove = hopper_pci_remove,
+};
+
+static int __devinit hopper_init(void)
+{
+ return pci_register_driver(&hopper_pci_driver);
+}
+
+static void __devexit hopper_exit(void)
+{
+ return pci_unregister_driver(&hopper_pci_driver);
+}
+
+module_init(hopper_init);
+module_exit(hopper_exit);
+
+MODULE_DESCRIPTION("HOPPER driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+ if (!fe)
+ return -1;
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3028_frontend_init,
+ .power = GPIF_A00,
+ .reset = GPIF_A03,
+};
--- /dev/null
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct mantis_hwconfig vp3028_config;
+
+#endif /* __MANTIS_VP3028_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+#include "mantis_ca.h"
+
+static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_mem(ca, addr);
+}
+
+static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_mem(ca, addr, data);
+}
+
+static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_iom(ca, addr);
+}
+
+static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_iom(ca, addr, data);
+}
+
+static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
+ udelay(500); /* Wait.. */
+ mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
+ udelay(500);
+ mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
+ msleep(1000);
+ dvb_ca_en50221_camready_irq(&ca->en50221, 0);
+
+ return 0;
+}
+
+static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
+
+ return 0;
+}
+
+static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
+/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
+
+ return 0;
+}
+
+static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
+ }
+
+ return 0;
+}
+
+int mantis_ca_init(struct mantis_pci *mantis)
+{
+ struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
+ struct mantis_ca *ca;
+ int ca_flags = 0, result;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
+ ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
+ if (!ca) {
+ dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
+ result = -ENOMEM;
+ goto err;
+ }
+
+ ca->ca_priv = mantis;
+ mantis->mantis_ca = ca;
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
+ /* register CA interface */
+ ca->en50221.owner = THIS_MODULE;
+ ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
+ ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem;
+ ca->en50221.read_cam_control = mantis_ca_read_cam_ctl;
+ ca->en50221.write_cam_control = mantis_ca_write_cam_ctl;
+ ca->en50221.slot_reset = mantis_ca_slot_reset;
+ ca->en50221.slot_shutdown = mantis_ca_slot_shutdown;
+ ca->en50221.slot_ts_enable = mantis_ts_control;
+ ca->en50221.poll_slot_status = mantis_slot_status;
+ ca->en50221.data = ca;
+
+ mutex_init(&ca->ca_lock);
+
+ init_waitqueue_head(&ca->hif_data_wq);
+ init_waitqueue_head(&ca->hif_opdone_wq);
+ init_waitqueue_head(&ca->hif_write_wq);
+
+ dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
+ result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
+ if (result != 0) {
+ dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
+ mantis_evmgr_init(ca);
+ return 0;
+err:
+ kfree(ca);
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_ca_init);
+
+void mantis_ca_exit(struct mantis_pci *mantis)
+{
+ struct mantis_ca *ca = mantis->mantis_ca;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
+
+ mantis_evmgr_exit(ca);
+ dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
+ if (ca)
+ dvb_ca_en50221_release(&ca->en50221);
+
+ kfree(ca);
+}
+EXPORT_SYMBOL_GPL(mantis_ca_exit);
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CA_H
+#define __MANTIS_CA_H
+
+extern int mantis_ca_init(struct mantis_pci *mantis);
+extern void mantis_ca_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CA_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static int devs;
+
+#define DRIVER_NAME "Mantis"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &mantis_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
+ goto fail6;
+ }
+
+ devs++;
+
+ return err;
+
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
+ mantis_uart_exit(mantis);
+
+fail6:
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+
+ mantis_uart_exit(mantis);
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+}
+
+static struct pci_device_id mantis_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
+ MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
+ { }
+};
+
+static struct pci_driver mantis_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = mantis_pci_table,
+ .probe = mantis_pci_probe,
+ .remove = mantis_pci_remove,
+};
+
+static int __devinit mantis_init(void)
+{
+ return pci_register_driver(&mantis_pci_driver);
+}
+
+static void __devexit mantis_exit(void)
+{
+ return pci_unregister_driver(&mantis_pci_driver);
+}
+
+module_init(mantis_init);
+module_exit(mantis_exit);
+
+MODULE_DESCRIPTION("MANTIS driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_COMMON_H
+#define __MANTIS_COMMON_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#include "mantis_uart.h"
+
+#include "mantis_link.h"
+
+#define MANTIS_ERROR 0
+#define MANTIS_NOTICE 1
+#define MANTIS_INFO 2
+#define MANTIS_DEBUG 3
+#define MANTIS_TMG 9
+
+#define dprintk(y, z, format, arg...) do { \
+ if (z) { \
+ if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
+ printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
+ printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
+ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ } else { \
+ if (mantis->verbose > y) \
+ printk(format , ##arg); \
+ } \
+} while(0)
+
+#define mwrite(dat, addr) writel((dat), addr)
+#define mread(addr) readl(addr)
+
+#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
+#define mmread(addr) mread(mantis->mmio + (addr))
+
+#define MANTIS_TS_188 0
+#define MANTIS_TS_204 1
+
+#define TWINHAN_TECHNOLOGIES 0x1822
+#define MANTIS 0x4e35
+
+#define TECHNISAT 0x1ae4
+#define TERRATEC 0x153b
+
+#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
+ .vendor = TWINHAN_TECHNOLOGIES, \
+ .device = MANTIS, \
+ .subvendor = (__subven), \
+ .subdevice = (__subdev), \
+ .driver_data = (unsigned long) (__configptr) \
+}
+
+enum mantis_i2c_mode {
+ MANTIS_PAGE_MODE = 0,
+ MANTIS_BYTE_MODE,
+};
+
+struct mantis_pci;
+
+struct mantis_hwconfig {
+ char *model_name;
+ char *dev_type;
+ u32 ts_size;
+
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+ u32 bytes;
+
+ irqreturn_t (*irq_handler)(int irq, void *dev_id);
+ int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+
+ u8 power;
+ u8 reset;
+
+ enum mantis_i2c_mode i2c_mode;
+};
+
+struct mantis_pci {
+ unsigned int verbose;
+
+ /* PCI stuff */
+ u16 vendor_id;
+ u16 device_id;
+ u16 subsystem_vendor;
+ u16 subsystem_device;
+
+ u8 latency;
+
+ struct pci_dev *pdev;
+
+ unsigned long mantis_addr;
+ void __iomem *mmio;
+
+ u8 irq;
+ u8 revision;
+
+ unsigned int num;
+
+ /* RISC Core */
+ u32 finished_block;
+ u32 last_block;
+ u32 line_bytes;
+ u32 line_count;
+ u32 risc_pos;
+ u8 *buf_cpu;
+ dma_addr_t buf_dma;
+ u32 *risc_cpu;
+ dma_addr_t risc_dma;
+
+ struct tasklet_struct tasklet;
+
+ struct i2c_adapter adapter;
+ int i2c_rc;
+ wait_queue_head_t i2c_wq;
+ struct mutex i2c_lock;
+
+ /* DVB stuff */
+ struct dvb_adapter dvb_adapter;
+ struct dvb_frontend *fe;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend fe_hw;
+ struct dmx_frontend fe_mem;
+ struct dvb_net dvbnet;
+
+ u8 feeds;
+
+ struct mantis_hwconfig *hwconfig;
+
+ u32 mantis_int_stat;
+ u32 mantis_int_mask;
+
+ /* board specific */
+ u8 mac_address[8];
+ u32 sub_vendor_id;
+ u32 sub_device_id;
+
+ /* A12 A13 A14 */
+ u32 gpio_status;
+
+ u32 gpif_status;
+
+ struct mantis_ca *mantis_ca;
+
+ wait_queue_head_t uart_wq;
+ struct work_struct uart_work;
+ spinlock_t uart_lock;
+
+ struct input_dev *rc;
+};
+
+#define MANTIS_HIF_STATUS (mantis->gpio_status)
+
+#endif /* __MANTIS_COMMON_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_core.h"
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = 1
+ }, {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .buf = data,
+ .len = length
+ },
+ };
+
+ err = i2c_transfer(&mantis->adapter, msg, 2);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+
+ struct i2c_msg msg = {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = length
+ };
+
+ err = i2c_transfer(&mantis->adapter, &msg, 1);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
+ err, length, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int get_mac_address(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis->mac_address[0] = 0x08;
+ err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
+
+ return err;
+ }
+ dprintk(verbose, MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mantis->mac_address[0], mantis->mac_address[1],
+ mantis->mac_address[2], mantis->mac_address[3],
+ mantis->mac_address[4], mantis->mac_address[5]);
+
+ return 0;
+}
+
+#define MANTIS_MODEL_UNKNOWN "UNKNOWN"
+#define MANTIS_DEV_UNKNOWN "UNKNOWN"
+
+struct mantis_hwconfig unknown_device = {
+ .model_name = MANTIS_MODEL_UNKNOWN,
+ .dev_type = MANTIS_DEV_UNKNOWN,
+};
+
+static void mantis_load_config(struct mantis_pci *mantis)
+{
+ switch (mantis->subsystem_device) {
+ case MANTIS_VP_1033_DVB_S: /* VP-1033 */
+ mantis->hwconfig = &vp1033_mantis_config;
+ break;
+ case MANTIS_VP_1034_DVB_S: /* VP-1034 */
+ mantis->hwconfig = &vp1034_mantis_config;
+ break;
+ case MANTIS_VP_1041_DVB_S2: /* VP-1041 */
+ case TECHNISAT_SKYSTAR_HD2:
+ mantis->hwconfig = &vp1041_mantis_config;
+ break;
+ case MANTIS_VP_2033_DVB_C: /* VP-2033 */
+ mantis->hwconfig = &vp2033_mantis_config;
+ break;
+ case MANTIS_VP_2040_DVB_C: /* VP-2040 */
+ case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */
+ case TECHNISAT_CABLESTAR_HD2:
+ mantis->hwconfig = &vp2040_mantis_config;
+ break;
+ case MANTIS_VP_3030_DVB_T: /* VP-3030 */
+ mantis->hwconfig = &vp3030_mantis_config;
+ break;
+ default:
+ mantis->hwconfig = &unknown_device;
+ break;
+ }
+}
+
+int mantis_core_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ mantis_load_config(mantis);
+ dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
+ mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn));
+ dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->subsystem_vendor, mantis->subsystem_device);
+ dprintk(verbose, MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq, mantis->latency,
+ mantis->mantis_addr, mantis->mantis_mmio);
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
+ return err;
+ }
+ err = get_mac_address(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
+ return err;
+ }
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
+ return err;
+ }
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
+ return err;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
+ return err;
+ }
+
+ return 0;
+}
+
+int mantis_core_exit(struct mantis_pci *mantis)
+{
+ mantis_dma_stop(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
+
+ mantis_uart_exit(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
+
+ if (mantis_dma_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
+ if (mantis_dvb_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
+ if (mantis_i2c_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed");
+
+ return 0;
+}
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+ udelay(100);
+}
+
+/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
+void mantis_set_direction(struct mantis_pci *mantis, int direction)
+{
+ u32 reg;
+
+ reg = mmread(0x28);
+ dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
+ if (direction == 0x01) {
+ /* to CI */
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ } else {
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ }
+}
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CORE_H
+#define __MANTIS_CORE_H
+
+#include "mantis_common.h"
+
+
+#define FE_TYPE_SAT 0
+#define FE_TYPE_CAB 1
+#define FE_TYPE_TER 2
+
+#define FE_TYPE_TS204 0
+#define FE_TYPE_TS188 1
+
+
+struct vendorname {
+ u8 *sub_vendor_name;
+ u32 sub_vendor_id;
+};
+
+struct devicetype {
+ u8 *sub_device_name;
+ u32 sub_device_id;
+ u8 device_type;
+ u32 type_flags;
+};
+
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+extern int mantis_core_init(struct mantis_pci *mantis);
+extern int mantis_core_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CORE_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_dma.h"
+
+#define RISC_WRITE (0x01 << 28)
+#define RISC_JUMP (0x07 << 28)
+#define RISC_IRQ (0x01 << 24)
+
+#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
+#define RISC_FLUSH() (mantis->risc_pos = 0)
+#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode))
+
+#define MANTIS_BUF_SIZE (64 * 1024)
+#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4)
+#define MANTIS_BLOCK_COUNT (1 << 4)
+#define MANTIS_RISC_SIZE PAGE_SIZE
+
+int mantis_dma_exit(struct mantis_pci *mantis)
+{
+ if (mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu,
+ MANTIS_BUF_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE,
+ mantis->buf_cpu, mantis->buf_dma);
+
+ mantis->buf_cpu = NULL;
+ }
+ if (mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu,
+ MANTIS_RISC_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
+ mantis->risc_cpu, mantis->risc_dma);
+
+ mantis->risc_cpu = NULL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_exit);
+
+static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
+{
+ if (!mantis->buf_cpu) {
+ mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_BUF_SIZE,
+ &mantis->buf_dma);
+ if (!mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA buffer allocation failed");
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu, MANTIS_BUF_SIZE);
+ }
+ if (!mantis->risc_cpu) {
+ mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_RISC_SIZE,
+ &mantis->risc_dma);
+
+ if (!mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC program allocation failed");
+
+ mantis_dma_exit(mantis);
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu, MANTIS_RISC_SIZE);
+ }
+
+ return 0;
+err:
+ dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
+ return -ENOMEM;
+}
+
+static inline int mantis_calc_lines(struct mantis_pci *mantis)
+{
+ mantis->line_bytes = MANTIS_BLOCK_BYTES;
+ mantis->line_count = MANTIS_BLOCK_COUNT;
+
+ while (mantis->line_bytes > 4095) {
+ mantis->line_bytes >>= 1;
+ mantis->line_count <<= 1;
+ }
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
+ MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
+
+ if (mantis->line_count > 255) {
+ dprintk(MANTIS_ERROR, 1, "Buffer size error");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int mantis_dma_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
+ if (mantis_alloc_buffers(mantis) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
+
+ /* Stop RISC Engine */
+ mmwrite(0, MANTIS_DMA_CTL);
+
+ goto err;
+ }
+ err = mantis_calc_lines(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
+
+ goto err;
+ }
+
+ return 0;
+err:
+ return err;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_init);
+
+static inline void mantis_risc_program(struct mantis_pci *mantis)
+{
+ u32 buf_pos = 0;
+ u32 line;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
+ RISC_FLUSH();
+
+ dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
+ mantis->line_count, mantis->line_bytes);
+
+ for (line = 0; line < mantis->line_count; line++) {
+ dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
+ if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
+ RISC_INSTR(RISC_WRITE |
+ RISC_IRQ |
+ RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) +
+ (MANTIS_BLOCK_COUNT - 1)) %
+ MANTIS_BLOCK_COUNT) |
+ mantis->line_bytes);
+ } else {
+ RISC_INSTR(RISC_WRITE | mantis->line_bytes);
+ }
+ RISC_INSTR(mantis->buf_dma + buf_pos);
+ buf_pos += mantis->line_bytes;
+ }
+ RISC_INSTR(RISC_JUMP);
+ RISC_INSTR(mantis->risc_dma);
+}
+
+void mantis_dma_start(struct mantis_pci *mantis)
+{
+ dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
+
+ mantis_risc_program(mantis);
+ mmwrite(mantis->risc_dma, MANTIS_RISC_START);
+ mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ mmwrite(0, MANTIS_DMA_CTL);
+ mantis->last_block = mantis->finished_block = 0;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
+
+ mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
+ | MANTIS_RISC_EN, MANTIS_DMA_CTL);
+
+}
+
+void mantis_dma_stop(struct mantis_pci *mantis)
+{
+ u32 stat = 0, mask = 0;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
+
+ mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
+
+ mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
+ MANTIS_DCAP_EN |
+ MANTIS_RISC_EN)), MANTIS_DMA_CTL);
+
+ mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
+
+ mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
+ MANTIS_INT_RISCEN), MANTIS_INT_MASK);
+}
+
+
+void mantis_dma_xfer(unsigned long data)
+{
+ struct mantis_pci *mantis = (struct mantis_pci *) data;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ while (mantis->last_block != mantis->finished_block) {
+ dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
+ mantis->last_block, mantis->finished_block);
+
+ (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+ (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
+ mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT;
+ }
+}
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DMA_H
+#define __MANTIS_DMA_H
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern void mantis_dma_xfer(unsigned long data);
+
+#endif /* __MANTIS_DMA_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ switch (power) {
+ case POWER_ON:
+ dprintk(MANTIS_DEBUG, 1, "Power ON");
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ break;
+
+ case POWER_OFF:
+ dprintk(MANTIS_DEBUG, 1, "Power OFF");
+ gpio_set_bits(mantis, config->power, POWER_OFF);
+ msleep(100);
+ break;
+
+ default:
+ dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_power);
+
+void mantis_frontend_soft_reset(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
+
+static int mantis_frontend_shutdown(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis_frontend_soft_reset(mantis);
+ err = mantis_frontend_power(mantis, POWER_OFF);
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds++;
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds);
+
+ if (mantis->feeds == 1) {
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
+ mantis_dma_start(mantis);
+ }
+
+ return mantis->feeds;
+}
+
+static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds--;
+ if (mantis->feeds == 0) {
+ dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+ mantis_dma_stop(mantis);
+ }
+
+ return 0;
+}
+
+int __devinit mantis_dvb_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int result = -1;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
+
+ result = dvb_register_adapter(&mantis->dvb_adapter,
+ "Mantis DVB adapter",
+ THIS_MODULE,
+ &mantis->pdev->dev,
+ adapter_nr);
+
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "Error registering adapter");
+ return -ENODEV;
+ }
+
+ mantis->dvb_adapter.priv = mantis;
+ mantis->demux.dmx.capabilities = DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING;
+
+ mantis->demux.priv = mantis;
+ mantis->demux.filternum = 256;
+ mantis->demux.feednum = 256;
+ mantis->demux.start_feed = mantis_dvb_start_feed;
+ mantis->demux.stop_feed = mantis_dvb_stop_feed;
+ mantis->demux.write_to_decoder = NULL;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
+ result = dvb_dmx_init(&mantis->demux);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+
+ goto err0;
+ }
+
+ mantis->dmxdev.filternum = 256;
+ mantis->dmxdev.demux = &mantis->demux.dmx;
+ mantis->dmxdev.capabilities = 0;
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
+
+ result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
+ goto err1;
+ }
+
+ mantis->fe_hw.source = DMX_FRONTEND_0;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err2;
+ }
+
+ mantis->fe_mem.source = DMX_MEMORY_FE;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err3;
+ }
+
+ result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err4;
+ }
+
+ dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
+ tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+ if (mantis->hwconfig) {
+ result = config->frontend_init(mantis, mantis->fe);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
+ goto err5;
+ } else {
+ if (mantis->fe == NULL) {
+ dprintk(MANTIS_ERROR, 1, "FE <NULL>");
+ goto err5;
+ }
+
+ if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
+
+ if (mantis->fe->ops.release)
+ mantis->fe->ops.release(mantis->fe);
+
+ mantis->fe = NULL;
+ goto err5;
+ }
+ }
+ }
+
+ return 0;
+
+ /* Error conditions .. */
+err5:
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+err4:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+
+err3:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+err2:
+ dvb_dmxdev_release(&mantis->dmxdev);
+
+err1:
+ dvb_dmx_release(&mantis->demux);
+
+err0:
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_init);
+
+int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
+{
+ int err;
+
+ if (mantis->fe) {
+ /* mantis_ca_exit(mantis); */
+ err = mantis_frontend_shutdown(mantis);
+ if (err != 0)
+ dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+ }
+
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+ dvb_dmxdev_release(&mantis->dmxdev);
+ dvb_dmx_release(&mantis->demux);
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_exit);
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DVB_H
+#define __MANTIS_DVB_H
+
+enum mantis_power {
+ POWER_OFF = 0,
+ POWER_ON = 1
+};
+
+extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
+extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
+
+extern int mantis_dvb_init(struct mantis_pci *mantis);
+extern int mantis_dvb_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_DVB_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+static void mantis_hifevm_work(struct work_struct *work)
+{
+ struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work);
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, gpif_mask;
+
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ gpif_mask = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ if (gpif_stat & MANTIS_CARD_PLUGIN) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_plugin(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ }
+ } else {
+ if (gpif_stat & MANTIS_CARD_PLUGOUT) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_unplug(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+ }
+
+ if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_SBUF_WSTO)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OVFLW)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_BRRDY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_INTSTAT)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_EMPTY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OPDONE) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
+ ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
+ ca->hif_event = MANTIS_SBUF_OPDONE;
+ wake_up(&ca->hif_opdone_wq);
+ }
+}
+
+int mantis_evmgr_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
+ INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
+ mantis_pcmcia_init(ca);
+ schedule_work(&ca->hif_evm_work);
+ mantis_hif_init(ca);
+ return 0;
+}
+
+void mantis_evmgr_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
+ flush_scheduled_work();
+ mantis_hif_exit(ca);
+ mantis_pcmcia_exit(ca);
+}
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_hif.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+
+#include "mantis_reg.h"
+
+
+static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_opdone_wq,
+ ca->hif_event & MANTIS_SBUF_OPDONE,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
+ ca->hif_event &= ~MANTIS_SBUF_OPDONE;
+ return rc;
+}
+
+static int mantis_hif_write_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 opdone = 0, timeout = 0;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_write_wq,
+ mantis->gpif_status & MANTIS_GPIF_WRACK,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
+ mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
+ while (!opdone) {
+ opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
+ udelay(500);
+ timeout++;
+ if (timeout > 100) {
+ dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
+ rc = -ETIMEDOUT;
+ break;
+ }
+ }
+ dprintk(MANTIS_DEBUG, 1, "HIF Write success");
+ return rc;
+}
+
+
+int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0, data, count = 4;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(count, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ mutex_unlock(&ca->ca_lock);
+ dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
+ return (data >> 24) & 0xff;
+}
+
+int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 data, hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(1, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
+ udelay(50);
+ mutex_unlock(&ca->ca_lock);
+
+ return (u8) data;
+}
+
+int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+ udelay(50);
+
+ return 0;
+}
+
+int mantis_hif_init(struct mantis_ca *ca)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ slot[0].slave_cfg = 0x70773028;
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
+
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg = MANTIS_MASK_BRRDY |
+ MANTIS_MASK_WRACK |
+ MANTIS_MASK_EXTIRQ |
+ MANTIS_MASK_WSTO |
+ MANTIS_MASK_OTHERR |
+ MANTIS_MASK_OVFLW;
+
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+void mantis_hif_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg &= ~MANTIS_MASK_BRRDY;
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+}
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_HIF_H
+#define __MANTIS_HIF_H
+
+#define MANTIS_HIF_MEMRD 1
+#define MANTIS_HIF_MEMWR 2
+#define MANTIS_HIF_IOMRD 3
+#define MANTIS_HIF_IOMWR 4
+
+#endif /* __MANTIS_HIF_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_i2c.h"
+
+#define TRIALS 10000
+
+static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ u32 rxd, i, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ rxd = (msg->addr << 25) | (1 << 24)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ rxd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(rxd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+
+ rxd = mmread(MANTIS_I2CDATA_CTL);
+ msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ int i;
+ u32 txd = 0, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ txd = (msg->addr << 25) | (msg->buf[i] << 8)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ txd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+ int ret = 0, i = 0, trials;
+ u32 stat, data, txd;
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+
+ mantis = i2c_get_adapdata(adapter);
+ BUG_ON(!mantis);
+ config = mantis->hwconfig;
+ BUG_ON(!config);
+
+ dprintk(MANTIS_DEBUG, 1, "Messages:%d", num);
+ mutex_lock(&mantis->i2c_lock);
+
+ while (i < num) {
+ /* Byte MODE */
+ if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
+ ((i + 1) < num) &&
+ (msgs[i].len < 2) &&
+ (msgs[i + 1].len < 2) &&
+ (msgs[i + 1].flags & I2C_M_RD)) {
+
+ dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n");
+
+ /* Read operation */
+ txd = msgs[i].addr << 25 | (0x1 << 24)
+ | (msgs[i].buf[0] << 16)
+ | MANTIS_I2C_RATE_3;
+
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ /* check for xfer completion */
+ if (stat & MANTIS_INT_I2CDONE) {
+ /* check xfer was acknowledged */
+ if (stat & MANTIS_INT_I2CRACK) {
+ data = mmread(MANTIS_I2CDATA_CTL);
+ msgs[i + 1].buf[0] = (data >> 8) & 0xff;
+ dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]);
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ i += 2; /* Write/Read operation in one go */
+ }
+
+ if (i < num) {
+ if (msgs[i].flags & I2C_M_RD)
+ ret = mantis_i2c_read(mantis, &msgs[i]);
+ else
+ ret = mantis_i2c_write(mantis, &msgs[i]);
+
+ i++;
+ if (ret < 0)
+ goto bail_out;
+ }
+
+ }
+
+ mutex_unlock(&mantis->i2c_lock);
+
+ return num;
+
+bail_out:
+ mutex_unlock(&mantis->i2c_lock);
+ return ret;
+}
+
+static u32 mantis_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm mantis_algo = {
+ .master_xfer = mantis_i2c_xfer,
+ .functionality = mantis_i2c_func,
+};
+
+int __devinit mantis_i2c_init(struct mantis_pci *mantis)
+{
+ u32 intstat, intmask;
+ struct i2c_adapter *i2c_adapter = &mantis->adapter;
+ struct pci_dev *pdev = mantis->pdev;
+
+ init_waitqueue_head(&mantis->i2c_wq);
+ mutex_init(&mantis->i2c_lock);
+ strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name));
+ i2c_set_adapdata(i2c_adapter, mantis);
+
+ i2c_adapter->owner = THIS_MODULE;
+ i2c_adapter->class = I2C_CLASS_TV_DIGITAL;
+ i2c_adapter->algo = &mantis_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->timeout = 500;
+ i2c_adapter->retries = 3;
+ i2c_adapter->dev.parent = &pdev->dev;
+
+ mantis->i2c_rc = i2c_add_adapter(i2c_adapter);
+ if (mantis->i2c_rc < 0)
+ return mantis->i2c_rc;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
+
+ intstat = mmread(MANTIS_INT_STAT);
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite(intstat, MANTIS_INT_STAT);
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_init);
+
+int mantis_i2c_exit(struct mantis_pci *mantis)
+{
+ u32 intmask;
+
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
+ return i2c_del_adapter(&mantis->adapter);
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_exit);
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_I2C_H
+#define __MANTIS_I2C_H
+
+#define I2C_STOP (1 << 0)
+#define I2C_READ (1 << 1)
+
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_I2C_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/input.h>
+#include <media/ir-common.h>
+#include <linux/pci.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+static struct ir_scancode mantis_ir_table[] = {
+ { 0x29, KEY_POWER },
+ { 0x28, KEY_FAVORITES },
+ { 0x30, KEY_TEXT },
+ { 0x17, KEY_INFO }, /* Preview */
+ { 0x23, KEY_EPG },
+ { 0x3b, KEY_F22 }, /* Record List */
+ { 0x3c, KEY_1 },
+ { 0x3e, KEY_2 },
+ { 0x39, KEY_3 },
+ { 0x36, KEY_4 },
+ { 0x22, KEY_5 },
+ { 0x20, KEY_6 },
+ { 0x32, KEY_7 },
+ { 0x26, KEY_8 },
+ { 0x24, KEY_9 },
+ { 0x2a, KEY_0 },
+
+ { 0x33, KEY_CANCEL },
+ { 0x2c, KEY_BACK },
+ { 0x15, KEY_CLEAR },
+ { 0x3f, KEY_TAB },
+ { 0x10, KEY_ENTER },
+ { 0x14, KEY_UP },
+ { 0x0d, KEY_RIGHT },
+ { 0x0e, KEY_DOWN },
+ { 0x11, KEY_LEFT },
+
+ { 0x21, KEY_VOLUMEUP },
+ { 0x35, KEY_VOLUMEDOWN },
+ { 0x3d, KEY_CHANNELDOWN },
+ { 0x3a, KEY_CHANNELUP },
+ { 0x2e, KEY_RECORD },
+ { 0x2b, KEY_PLAY },
+ { 0x13, KEY_PAUSE },
+ { 0x25, KEY_STOP },
+
+ { 0x1f, KEY_REWIND },
+ { 0x2d, KEY_FASTFORWARD },
+ { 0x1e, KEY_PREVIOUS }, /* Replay |< */
+ { 0x1d, KEY_NEXT }, /* Skip >| */
+
+ { 0x0b, KEY_CAMERA }, /* Capture */
+ { 0x0f, KEY_LANGUAGE }, /* SAP */
+ { 0x18, KEY_MODE }, /* PIP */
+ { 0x12, KEY_ZOOM }, /* Full screen */
+ { 0x1c, KEY_SUBTITLE },
+ { 0x2f, KEY_MUTE },
+ { 0x16, KEY_F20 }, /* L/R */
+ { 0x38, KEY_F21 }, /* Hibernate */
+
+ { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
+ { 0x31, KEY_AGAIN }, /* Recall */
+ { 0x1a, KEY_KPPLUS }, /* Zoom+ */
+ { 0x19, KEY_KPMINUS }, /* Zoom- */
+ { 0x27, KEY_RED },
+ { 0x0C, KEY_GREEN },
+ { 0x01, KEY_YELLOW },
+ { 0x00, KEY_BLUE },
+};
+
+struct ir_scancode_table ir_mantis = {
+ .scan = mantis_ir_table,
+ .size = ARRAY_SIZE(mantis_ir_table),
+};
+EXPORT_SYMBOL_GPL(ir_mantis);
+
+int mantis_input_init(struct mantis_pci *mantis)
+{
+ struct input_dev *rc;
+ struct ir_input_state rc_state;
+ char name[80], dev[80];
+ int err;
+
+ rc = input_allocate_device();
+ if (!rc) {
+ dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+ return -ENOMEM;
+ }
+
+ sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+ sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+
+ rc->name = name;
+ rc->phys = dev;
+
+ ir_input_init(rc, &rc_state, IR_TYPE_OTHER);
+
+ rc->id.bustype = BUS_PCI;
+ rc->id.vendor = mantis->vendor_id;
+ rc->id.product = mantis->device_id;
+ rc->id.version = 1;
+ rc->dev = mantis->pdev->dev;
+
+ err = ir_input_register(rc, &ir_mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
+ input_free_device(rc);
+ return -ENODEV;
+ }
+
+ mantis->rc = rc;
+
+ return 0;
+}
+
+int mantis_exit(struct mantis_pci *mantis)
+{
+ struct input_dev *rc = mantis->rc;
+
+ ir_input_unregister(rc);
+
+ return 0;
+}
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_ioc.h"
+
+static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ int err;
+ u8 buf = reg;
+
+ struct i2c_msg msg[] = {
+ { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
+ { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
+ };
+
+ err = i2c_transfer(adapter, msg, 2);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+int mantis_get_mac(struct mantis_pci *mantis)
+{
+ int err;
+ u8 mac_addr[6] = {0};
+
+ err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
+
+ return err;
+ }
+
+ dprintk(MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mac_addr[0],
+ mac_addr[1],
+ mac_addr[2],
+ mac_addr[3],
+ mac_addr[4],
+ mac_addr[5]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_get_mac);
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+}
+EXPORT_SYMBOL_GPL(gpio_set_bits);
+
+int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
+{
+ u32 reg;
+
+ reg = mmread(MANTIS_CONTROL);
+ switch (stream_ctl) {
+ case STREAM_TO_HIF:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+
+ case STREAM_TO_CAM:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_stream_control);
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_IOC_H
+#define __MANTIS_IOC_H
+
+#define GPIF_A00 0x00
+#define GPIF_A01 0x01
+#define GPIF_A02 0x02
+#define GPIF_A03 0x03
+#define GPIF_A04 0x04
+#define GPIF_A05 0x05
+#define GPIF_A06 0x06
+#define GPIF_A07 0x07
+#define GPIF_A08 0x08
+#define GPIF_A09 0x09
+#define GPIF_A10 0x0a
+#define GPIF_A11 0x0b
+
+#define GPIF_A12 0x0c
+#define GPIF_A13 0x0d
+#define GPIF_A14 0x0e
+
+enum mantis_stream_control {
+ STREAM_TO_HIF = 0,
+ STREAM_TO_CAM
+};
+
+extern int mantis_get_mac(struct mantis_pci *mantis);
+extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+
+extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
+
+#endif /* __MANTIS_IOC_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_LINK_H
+#define __MANTIS_LINK_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include "dvb_ca_en50221.h"
+
+enum mantis_sbuf_status {
+ MANTIS_SBUF_DATA_AVAIL = 1,
+ MANTIS_SBUF_DATA_EMPTY = 2,
+ MANTIS_SBUF_DATA_OVFLW = 3
+};
+
+struct mantis_slot {
+ u32 timeout;
+ u32 slave_cfg;
+ u32 bar;
+};
+
+/* Physical layer */
+enum mantis_slot_state {
+ MODULE_INSERTED = 3,
+ MODULE_XTRACTED = 4
+};
+
+struct mantis_ca {
+ struct mantis_slot slot[4];
+
+ struct work_struct hif_evm_work;
+
+ u32 hif_event;
+ wait_queue_head_t hif_opdone_wq;
+ wait_queue_head_t hif_brrdyw_wq;
+ wait_queue_head_t hif_data_wq;
+ wait_queue_head_t hif_write_wq; /* HIF Write op */
+
+ enum mantis_sbuf_status sbuf_status;
+
+ enum mantis_slot_state slot_state;
+
+ void *ca_priv;
+
+ struct dvb_ca_en50221 en50221;
+ struct mutex ca_lock;
+};
+
+/* CA */
+extern void mantis_event_cam_plugin(struct mantis_ca *ca);
+extern void mantis_event_cam_unplug(struct mantis_ca *ca);
+extern int mantis_pcmcia_init(struct mantis_ca *ca);
+extern void mantis_pcmcia_exit(struct mantis_ca *ca);
+extern int mantis_evmgr_init(struct mantis_ca *ca);
+extern void mantis_evmgr_exit(struct mantis_ca *ca);
+
+/* HIF */
+extern int mantis_hif_init(struct mantis_ca *ca);
+extern void mantis_hif_exit(struct mantis_ca *ca);
+extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
+extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
+
+#endif /* __MANTIS_LINK_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME "Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+ u8 revision, latency;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct pci_dev *pdev = mantis->pdev;
+ int err, ret = 0;
+
+ dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ config->model_name,
+ config->dev_type,
+ mantis->pdev->bus->number,
+ PCI_SLOT(mantis->pdev->devfn),
+ PCI_FUNC(mantis->pdev->devfn));
+
+ err = pci_enable_device(pdev);
+ if (err != 0) {
+ ret = -ENODEV;
+ dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+ goto fail0;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ pci_set_master(pdev);
+
+ if (!request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0),
+ DRIVER_NAME)) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+ ret = -ENODEV;
+ goto fail1;
+ }
+
+ mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (!mantis->mmio) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+ ret = -ENODEV;
+ goto fail2;
+ }
+
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ mantis->latency = latency;
+ mantis->revision = revision;
+
+ dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->pdev->subsystem_vendor,
+ mantis->pdev->subsystem_device);
+
+ dprintk(MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq,
+ mantis->latency,
+ mantis->mantis_addr,
+ mantis->mmio);
+
+ err = request_irq(pdev->irq,
+ config->irq_handler,
+ IRQF_SHARED,
+ DRIVER_NAME,
+ mantis);
+
+ if (err != 0) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+ ret = -ENODEV;
+ goto fail3;
+ }
+
+ pci_set_drvdata(pdev, mantis);
+ return ret;
+
+ /* Error conditions */
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+ if (mantis->mmio)
+ iounmap(mantis->mmio);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+ pci_disable_device(pdev);
+
+fail0:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+ pci_set_drvdata(pdev, NULL);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+ struct pci_dev *pdev = mantis->pdev;
+
+ dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+ free_irq(pdev->irq, mantis);
+ if (mantis->mmio) {
+ iounmap(mantis->mmio);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ }
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_PCI_H
+#define __MANTIS_PCI_H
+
+extern int mantis_pci_init(struct mantis_pci *mantis);
+extern void mantis_pci_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_PCI_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
+
+/*
+ * If Slot state is already PLUG_IN event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_plugin(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_XTRACTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0xda000000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_INSERTED;
+ }
+ udelay(100);
+}
+
+/*
+ * If Slot state is already UN_PLUG event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_unplug(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0x00da0000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGIN;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_XTRACTED;
+ }
+ udelay(100);
+}
+
+int mantis_pcmcia_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, card_stat;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ card_stat = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_XTRACTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+
+ return 0;
+}
+
+void mantis_pcmcia_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
+ mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+}
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_REG_H
+#define __MANTIS_REG_H
+
+/* Interrupts */
+#define MANTIS_INT_STAT 0x00
+#define MANTIS_INT_MASK 0x04
+
+#define MANTIS_INT_RISCSTAT (0x0f << 28)
+#define MANTIS_INT_RISCEN (0x01 << 27)
+#define MANTIS_INT_I2CRACK (0x01 << 26)
+
+/* #define MANTIS_INT_GPIF (0xff << 12) */
+
+#define MANTIS_INT_PCMCIA7 (0x01 << 19)
+#define MANTIS_INT_PCMCIA6 (0x01 << 18)
+#define MANTIS_INT_PCMCIA5 (0x01 << 17)
+#define MANTIS_INT_PCMCIA4 (0x01 << 16)
+#define MANTIS_INT_PCMCIA3 (0x01 << 15)
+#define MANTIS_INT_PCMCIA2 (0x01 << 14)
+#define MANTIS_INT_PCMCIA1 (0x01 << 13)
+#define MANTIS_INT_PCMCIA0 (0x01 << 12)
+#define MANTIS_INT_IRQ1 (0x01 << 11)
+#define MANTIS_INT_IRQ0 (0x01 << 10)
+#define MANTIS_INT_OCERR (0x01 << 8)
+#define MANTIS_INT_PABORT (0x01 << 7)
+#define MANTIS_INT_RIPERR (0x01 << 6)
+#define MANTIS_INT_PPERR (0x01 << 5)
+#define MANTIS_INT_FTRGT (0x01 << 3)
+#define MANTIS_INT_RISCI (0x01 << 1)
+#define MANTIS_INT_I2CDONE (0x01 << 0)
+
+/* DMA */
+#define MANTIS_DMA_CTL 0x08
+#define MANTIS_GPIF_RD (0xff << 24)
+#define MANTIS_GPIF_WR (0xff << 16)
+#define MANTIS_CPU_DO (0x01 << 10)
+#define MANTIS_DRV_DO (0x01 << 9)
+#define MANTIS_I2C_RD (0x01 << 7)
+#define MANTIS_I2C_WR (0x01 << 6)
+#define MANTIS_DCAP_MODE (0x01 << 5)
+#define MANTIS_FIFO_TP_4 (0x00 << 3)
+#define MANTIS_FIFO_TP_8 (0x01 << 3)
+#define MANTIS_FIFO_TP_16 (0x02 << 3)
+#define MANTIS_FIFO_EN (0x01 << 2)
+#define MANTIS_DCAP_EN (0x01 << 1)
+#define MANTIS_RISC_EN (0x01 << 0)
+
+/* DEBUG */
+#define MANTIS_DEBUGREG 0x0c
+#define MANTIS_DATINV (0x0e << 7)
+#define MANTIS_TOP_DEBUGSEL (0x07 << 4)
+#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0)
+
+#define MANTIS_RISC_START 0x10
+#define MANTIS_RISC_PC 0x14
+
+/* I2C */
+#define MANTIS_I2CDATA_CTL 0x18
+#define MANTIS_I2C_RATE_1 (0x00 << 6)
+#define MANTIS_I2C_RATE_2 (0x01 << 6)
+#define MANTIS_I2C_RATE_3 (0x02 << 6)
+#define MANTIS_I2C_RATE_4 (0x03 << 6)
+#define MANTIS_I2C_STOP (0x01 << 5)
+#define MANTIS_I2C_PGMODE (0x01 << 3)
+
+/* DATA */
+#define MANTIS_CMD_DATA_R1 0x20
+#define MANTIS_CMD_DATA_3 (0xff << 24)
+#define MANTIS_CMD_DATA_2 (0xff << 16)
+#define MANTIS_CMD_DATA_1 (0xff << 8)
+#define MANTIS_CMD_DATA_0 (0xff << 0)
+
+#define MANTIS_CMD_DATA_R2 0x24
+#define MANTIS_CMD_DATA_7 (0xff << 24)
+#define MANTIS_CMD_DATA_6 (0xff << 16)
+#define MANTIS_CMD_DATA_5 (0xff << 8)
+#define MANTIS_CMD_DATA_4 (0xff << 0)
+
+#define MANTIS_CONTROL 0x28
+#define MANTIS_DET (0x01 << 7)
+#define MANTIS_DAT_CF_EN (0x01 << 6)
+#define MANTIS_ACS (0x03 << 4)
+#define MANTIS_VCCEN (0x01 << 3)
+#define MANTIS_BYPASS (0x01 << 2)
+#define MANTIS_MRST (0x01 << 1)
+#define MANTIS_CRST_INT (0x01 << 0)
+
+#define MANTIS_GPIF_CFGSLA 0x84
+#define MANTIS_GPIF_WAITSMPL (0x07 << 28)
+#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25)
+#define MANTIS_GPIF_WAITPOL (0x01 << 24)
+#define MANTIS_GPIF_NCDELAY (0x07 << 20)
+#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16)
+#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15)
+#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8)
+#define MANTIS_GPIF_DEVTYPE (0x07 << 4)
+#define MANTIS_GPIF_BIGENDIAN (0x01 << 3)
+#define MANTIS_GPIF_FETCHCMD (0x03 << 1)
+#define MANTIS_GPIF_HWORDDEV (0x01 << 0)
+
+#define MANTIS_GPIF_WSTOPER 0x90
+#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31)
+#define MANTIS_GPIF_PARBOOTN (0x01 << 29)
+#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24)
+#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23)
+#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16)
+#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15)
+#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8)
+#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7)
+#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0)
+
+#define MANTIS_GPIF_CS2RW 0x94
+#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31)
+#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24)
+#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23)
+#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16)
+#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15)
+#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8)
+#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7)
+#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0)
+
+#define MANTIS_GPIF_IRQCFG 0x98
+#define MANTIS_GPIF_IRQPOL (0x01 << 8)
+#define MANTIS_MASK_WRACK (0x01 << 7)
+#define MANTIS_MASK_BRRDY (0x01 << 6)
+#define MANTIS_MASK_OVFLW (0x01 << 5)
+#define MANTIS_MASK_OTHERR (0x01 << 4)
+#define MANTIS_MASK_WSTO (0x01 << 3)
+#define MANTIS_MASK_EXTIRQ (0x01 << 2)
+#define MANTIS_MASK_PLUGIN (0x01 << 1)
+#define MANTIS_MASK_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_STATUS 0x9c
+#define MANTIS_SBUF_KILLOP (0x01 << 15)
+#define MANTIS_SBUF_OPDONE (0x01 << 14)
+#define MANTIS_SBUF_EMPTY (0x01 << 13)
+#define MANTIS_GPIF_DETSTAT (0x01 << 9)
+#define MANTIS_GPIF_INTSTAT (0x01 << 8)
+#define MANTIS_GPIF_WRACK (0x01 << 7)
+#define MANTIS_GPIF_BRRDY (0x01 << 6)
+#define MANTIS_SBUF_OVFLW (0x01 << 5)
+#define MANTIS_GPIF_OTHERR (0x01 << 4)
+#define MANTIS_SBUF_WSTO (0x01 << 3)
+#define MANTIS_GPIF_EXTIRQ (0x01 << 2)
+#define MANTIS_CARD_PLUGIN (0x01 << 1)
+#define MANTIS_CARD_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_BRADDR 0xa0
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_BRBYTES 0xa4
+#define MANTIS_GPIF_BRCNT (0xfff << 0)
+
+#define MANTIS_PCMCIA_RESET 0xa8
+#define MANTIS_PCMCIA_RSTVAL (0xff << 0)
+
+#define MANTIS_CARD_RESET 0xac
+
+#define MANTIS_GPIF_ADDR 0xb0
+#define MANTIS_GPIF_HIFRDWRN (0x01 << 31)
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_HIFADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_DOUT 0xb4
+#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0)
+
+#define MANTIS_GPIF_DIN 0xb8
+#define MANTIS_GPIF_HIFDIN (0xfffffff << 0)
+
+#define MANTIS_GPIF_SPARE 0xbc
+#define MANTIS_GPIF_LOGICRD (0xffff << 16)
+#define MANTIS_GPIF_LOGICRW (0xffff << 0)
+
+#endif /* __MANTIS_REG_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+struct mantis_uart_params {
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+};
+
+static struct {
+ char string[7];
+} rates[5] = {
+ { "9600" },
+ { "19200" },
+ { "38400" },
+ { "57600" },
+ { "115200" }
+};
+
+static struct {
+ char string[5];
+} parity[3] = {
+ { "NONE" },
+ { "ODD" },
+ { "EVEN" }
+};
+
+#define UART_MAX_BUF 16
+
+int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u32 stat = 0, i;
+
+ /* get data */
+ for (i = 0; i < (config->bytes + 1); i++) {
+
+ stat = mmread(MANTIS_UART_STAT);
+
+ if (stat & MANTIS_UART_RXFIFO_FULL) {
+ dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
+ }
+ data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
+
+ dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
+
+ if (data[i] & (1 << 7)) {
+ dprintk(MANTIS_ERROR, 1, "UART framing error");
+ return -EINVAL;
+ }
+ if (data[i] & (1 << 6)) {
+ dprintk(MANTIS_ERROR, 1, "UART parity error");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void mantis_uart_work(struct work_struct *work)
+{
+ struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u8 buf[16];
+ int i;
+
+ mantis_uart_read(mantis, buf);
+
+ for (i = 0; i < (config->bytes + 1); i++)
+ dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+}
+
+static int mantis_uart_setup(struct mantis_pci *mantis,
+ struct mantis_uart_params *params)
+{
+ u32 reg;
+
+ mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
+
+ reg = mmread(MANTIS_UART_BAUD);
+
+ switch (params->baud_rate) {
+ case MANTIS_BAUD_9600:
+ reg |= 0xd8;
+ break;
+ case MANTIS_BAUD_19200:
+ reg |= 0x6c;
+ break;
+ case MANTIS_BAUD_38400:
+ reg |= 0x36;
+ break;
+ case MANTIS_BAUD_57600:
+ reg |= 0x23;
+ break;
+ case MANTIS_BAUD_115200:
+ reg |= 0x11;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mmwrite(reg, MANTIS_UART_BAUD);
+
+ return 0;
+}
+
+int mantis_uart_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct mantis_uart_params params;
+
+ /* default parity: */
+ params.baud_rate = config->baud_rate;
+ params.parity = config->parity;
+ dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
+ rates[params.baud_rate].string,
+ parity[params.parity].string);
+
+ init_waitqueue_head(&mantis->uart_wq);
+ spin_lock_init(&mantis->uart_lock);
+
+ INIT_WORK(&mantis->uart_work, mantis_uart_work);
+
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+
+ mantis_uart_setup(mantis, ¶ms);
+
+ /* default 1 byte */
+ mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
+
+ /* flush buffer */
+ mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
+
+ /* enable interrupt */
+ mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
+ mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
+
+ schedule_work(&mantis->uart_work);
+ dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_uart_init);
+
+void mantis_uart_exit(struct mantis_pci *mantis)
+{
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+}
+EXPORT_SYMBOL_GPL(mantis_uart_exit);
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_UART_H
+#define __MANTIS_UART_H
+
+#define MANTIS_UART_CTL 0xe0
+#define MANTIS_UART_RXINT (1 << 4)
+#define MANTIS_UART_RXFLUSH (1 << 2)
+
+#define MANTIS_UART_RXD 0xe8
+#define MANTIS_UART_BAUD 0xec
+
+#define MANTIS_UART_STAT 0xf0
+#define MANTIS_UART_RXFIFO_DATA (1 << 7)
+#define MANTIS_UART_RXFIFO_EMPTY (1 << 6)
+#define MANTIS_UART_RXFIFO_FULL (1 << 3)
+#define MANTIS_UART_FRAME_ERR (1 << 2)
+#define MANTIS_UART_PARITY_ERR (1 << 1)
+#define MANTIS_UART_RXTHRESH_INT (1 << 0)
+
+enum mantis_baud {
+ MANTIS_BAUD_9600 = 0,
+ MANTIS_BAUD_19200,
+ MANTIS_BAUD_38400,
+ MANTIS_BAUD_57600,
+ MANTIS_BAUD_115200
+};
+
+enum mantis_parity {
+ MANTIS_PARITY_NONE = 0,
+ MANTIS_PARITY_EVEN,
+ MANTIS_PARITY_ODD,
+};
+
+struct mantis_pci;
+
+extern int mantis_uart_init(struct mantis_pci *mantis);
+extern void mantis_uart_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_UART_H */
--- /dev/null
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "stv0299.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1033.h"
+#include "mantis_reg.h"
+
+u8 lgtdqcs001f_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x2a,
+ 0x05, 0x85,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x0c, 0x01,
+ 0x0d, 0x81,
+ 0x0e, 0x44,
+ 0x0f, 0x94,
+ 0x10, 0x3c,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x13, 0xb5,
+ 0x14, 0x4f,
+ 0x15, 0xc9,
+ 0x16, 0x80,
+ 0x17, 0x36,
+ 0x18, 0xfb,
+ 0x19, 0xcf,
+ 0x1a, 0xbc,
+ 0x1c, 0x2b,
+ 0x1d, 0x27,
+ 0x1e, 0x00,
+ 0x1f, 0x0b,
+ 0x20, 0xa1,
+ 0x21, 0x60,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x05,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+#define MANTIS_MODEL_NAME "VP-1033"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[4];
+ u32 div;
+
+
+ struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)};
+
+ div = params->frequency / 250;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x83;
+ buf[3] = 0xc0;
+
+ if (params->frequency < 1531000)
+ buf[3] |= 0x04;
+ else
+ buf[3] &= ~0x04;
+ if (i2c_transfer(adapter, &msg, 1) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
+ return -EIO;
+ }
+ msleep_interruptible(100);
+
+ return 0;
+}
+
+int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+struct stv0299_config lgtdqcs001f_config = {
+ .demod_address = 0x68,
+ .inittab = lgtdqcs001f_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = lgtdqcs001f_set_symbol_rate,
+};
+
+static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+ fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+ lgtdqcs001f_config.demod_address);
+
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
--- /dev/null
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1033_H
+#define __MANTIS_VP1033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1033_DVB_S 0x0016
+
+extern struct mantis_hwconfig vp1033_config;
+
+#endif /* __MANTIS_VP1033_H */
--- /dev/null
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1034.h"
+#include "mantis_reg.h"
+
+struct mb86a16_config vp1034_mb86a16_config = {
+ .demod_address = 0x08,
+ .set_voltage = vp1034_set_voltage,
+};
+
+#define MANTIS_MODEL_NAME "VP-1034"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
+ gpio_set_bits(mantis, 13, 1);
+ gpio_set_bits(mantis, 14, 0);
+ break;
+ case SEC_VOLTAGE_18:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
+ gpio_set_bits(mantis, 13, 1);
+ gpio_set_bits(mantis, 14, 1);
+ break;
+ case SEC_VOLTAGE_OFF:
+ dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
+ return -EINVAL;
+ }
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+
+ return 0;
+}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+ fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found MB86A16 DVB-S/DSS frontend @0x%02x",
+ vp1034_mb86a16_config.demod_address);
+
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1034_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
--- /dev/null
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1034_H
+#define __MANTIS_VP1034_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+
+
+#define MANTIS_VP_1034_DVB_S 0x0014
+
+extern struct mantis_hwconfig vp1034_config;
+extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+
+#endif /* __MANTIS_VP1034_H */
--- /dev/null
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1041.h"
+#include "stb0899_reg.h"
+#include "stb0899_drv.h"
+#include "stb0899_cfg.h"
+#include "stb6100_cfg.h"
+#include "stb6100.h"
+#include "lnbp21.h"
+
+#define MANTIS_MODEL_NAME "VP-1041"
+#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2"
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
+
+ /* 0x0000000b, *//* SYSREG */
+ { STB0899_DEV_ID , 0x30 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISFIFO , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x99 },
+ { STB0899_DISF22RX , 0xa8 },
+ /* SYSREG ? */
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0xfe },
+ { STB0899_IRQSTATUS_2 , 0x03 },
+ { STB0899_IRQSTATUS_1 , 0x7c },
+ { STB0899_IRQSTATUS_0 , 0xf4 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 },
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x33 },
+ { STB0899_IOPVALUE3 , 0x6d },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x60 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x01 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x01 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x23 },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xf7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xf1 },
+ { STB0899_LDT2 , 0xe3 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfd },
+ { STB0899_QDCCOMP , 0xff },
+ { STB0899_POWERI , 0x0c },
+ { STB0899_POWERQ , 0x0f },
+ { STB0899_RCOMP , 0x6c },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x06 },
+ { STB0899_AGC2I2 , 0x00 },
+ { STB0899_TLIR , 0x30 },
+ { STB0899_RTF , 0x7f },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xbc },
+ { STB0899_CFRM , 0xea },
+ { STB0899_CFRL , 0x31 },
+ { STB0899_NIRM , 0x2b },
+ { STB0899_NIRL , 0x80 },
+ { STB0899_ISYMB , 0x1d },
+ { STB0899_QSYMB , 0xa6 },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0x02 },
+ { STB0899_EQUAQ1 , 0xff },
+ { STB0899_EQUAI2 , 0x04 },
+ { STB0899_EQUAQ2 , 0x05 },
+ { STB0899_EQUAI3 , 0x02 },
+ { STB0899_EQUAQ3 , 0xfd },
+ { STB0899_EQUAI4 , 0x03 },
+ { STB0899_EQUAQ4 , 0x07 },
+ { STB0899_EQUAI5 , 0x08 },
+ { STB0899_EQUAQ5 , 0xf5 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0x86 },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x0a },
+ { STB0899_ECNT3L , 0xad },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xb0 },
+ { STB0899_VTH23 , 0x7a },
+ { STB0899_VTH34 , 0x58 },
+ { STB0899_VTH56 , 0x38 },
+ { STB0899_VTH67 , 0x34 },
+ { STB0899_VTH78 , 0x24 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x41 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x00 },
+ { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x1b },
+ { STB0899_TSLLSTKL , 0xb3 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0x00 },
+ { STB0899_PCKLENUL , 0xbc },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xbd },
+ { STB0899_TSSTATUS , 0x90 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x95 },
+ { STB0899_ERRCTRL3 , 0x8d },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x19 },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0xf0 },
+ { STB0899_MATSTRL , 0x02 },
+ { STB0899_UPLSTRM , 0x45 },
+ { STB0899_UPLSTRL , 0x60 },
+ { STB0899_DFLSTRM , 0xe3 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x47 },
+ { STB0899_SYNCDSTRM , 0x05 },
+ { STB0899_SYNCDSTRL , 0x18 },
+ { STB0899_CFGPDELSTATUS1 , 0x19 },
+ { STB0899_CFGPDELSTATUS2 , 0x2b },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x01 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+struct stb0899_config vp1041_stb0899_config = {
+ .init_dev = vp1041_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = vp1041_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = 0x68, /* 0xd0 >> 1 */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+};
+
+struct stb6100_config vp1041_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+ mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+ if (mantis->fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
+ vp1041_stb0899_config.demod_address);
+
+ if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
+ if (!lnbp21_attach(mantis->fe, adapter, 0, 0))
+ dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
+ }
+ } else {
+ return -EREMOTEIO;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1041_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1041_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
--- /dev/null
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1041_H
+#define __MANTIS_VP1041_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1041_DVB_S2 0x0031
+#define SKYSTAR_HD2_10 0x0001
+#define SKYSTAR_HD2_20 0x0003
+#define CINERGY_S2_PCI_HD 0x1179
+
+extern struct mantis_hwconfig vp1041_config;
+
+#endif /* __MANTIS_VP1041_H */
--- /dev/null
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2033.h"
+
+#define MANTIS_MODEL_NAME "VP-2033"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2033_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2033_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
--- /dev/null
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2033_H
+#define __MANTIS_VP2033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2033_DVB_C 0x0008
+
+extern struct mantis_hwconfig vp2033_config;
+
+#endif /* __MANTIS_VP2033_H */
--- /dev/null
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2040.h"
+
+#define MANTIS_MODEL_NAME "VP-2040"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2040_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2040_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2040_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2040_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
--- /dev/null
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2040_H
+#define __MANTIS_VP2040_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2040_DVB_C 0x0043
+#define CINERGY_C 0x1178
+#define CABLESTAR_HD2 0x0002
+
+extern struct mantis_hwconfig vp2040_config;
+
+#endif /* __MANTIS_VP2040_H */
--- /dev/null
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_vp3028.h"
+
+struct zl10353_config mantis_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+struct mantis_hwconfig vp3028_mantis_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+};
--- /dev/null
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+#include "zl10353.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct zl10353_config mantis_vp3028_config;
+extern struct mantis_hwconfig vp3028_mantis_config;
+
+#endif /* __MANTIS_VP3028_H */
--- /dev/null
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "tda665x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp3030.h"
+
+struct zl10353_config mantis_vp3030_config = {
+ .demod_address = 0x0f,
+};
+
+struct tda665x_config env57h12d5_config = {
+ .name = "ENV57H12D5 (ET-50DT)",
+ .addr = 0x60,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
+ .frequency_offst = 3616667,
+ .ref_multiplier = 6, /* 1/6 MHz */
+ .ref_divider = 100000, /* 1/6 MHz */
+};
+
+#define MANTIS_MODEL_NAME "VP-3030"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&mantis_vp3030_config, adapter);
+
+ if (!fe)
+ return -1;
+
+ tda665x_attach(fe, &env57h12d5_config, adapter);
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3030_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+
+ .i2c_mode = MANTIS_BYTE_MODE
+};
--- /dev/null
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3030_H
+#define __MANTIS_VP3030_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3030_DVB_T 0x0024
+
+extern struct mantis_hwconfig vp3030_config;
+
+#endif /* __MANTIS_VP3030_H */
/* put the buffer in the 'queued' queue */
i = gspca_dev->fr_q;
gspca_dev->fr_queue[i] = index;
+ if (gspca_dev->fr_i == i)
+ gspca_dev->cur_frame = frame;
gspca_dev->fr_q = (i + 1) % gspca_dev->nframes;
PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d",
gspca_dev->fr_q,
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528")
}
+ }, {
+ .ident = "Fujitsu-Siemens Amilo Xi 2428",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2428")
+ }
}, {
.ident = "Fujitsu-Siemens Amilo Xi 2528",
.matches = {
static void setsharpness_96(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
+ s8 val;
val = sd->sharpness;
if (val < 0) { /* auto */
}
}
if (avg_lum > MAX_AVG_LUM) {
- if (sd->gain - 1 >= 0) {
+ if (sd->gain >= 1) {
sd->gain--;
set_gain(gspca_dev);
}
/* This reg is written twice. Some kind of reset? */
{NULL, 0x1620, 0x80},
{NULL, 0x1620, 0x00},
+ {NULL, 0x1443, 0x00},
{NULL, 0x1423, 0x04},
{x1500, 0x1500, ARRAY_SIZE(x1500)},
{x1536, 0x1536, ARRAY_SIZE(x1536)},
spca504B_PollingDataReady(gspca_dev);
/* Init the cam width height with some values get on init ? */
- reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+ reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
- reg_w_riv(gspca_dev, 0, 0x00, 0x21ad); /* hue */
- reg_w_riv(gspca_dev, 0, 0x01, 0x21ac); /* sat/hue */
- reg_w_riv(gspca_dev, 0, 0x00, 0x21a3); /* gamma */
+ reg_w_riv(gspca_dev, 0, 0x21ad, 0x00); /* hue */
+ reg_w_riv(gspca_dev, 0, 0x21ac, 0x01); /* sat/hue */
+ reg_w_riv(gspca_dev, 0, 0x21a3, 0x00); /* gamma */
break;
case BRIDGE_SPCA536:
- reg_w_riv(gspca_dev, 0, 0x40, 0x20f5);
- reg_w_riv(gspca_dev, 0, 0x01, 0x20f4);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2089);
+ reg_w_riv(gspca_dev, 0, 0x20f5, 0x40);
+ reg_w_riv(gspca_dev, 0, 0x20f4, 0x01);
+ reg_w_riv(gspca_dev, 0, 0x2089, 0x00);
break;
}
if (pollreg)
switch (sd->bridge) {
case BRIDGE_SPCA504B:
reg_w_riv(gspca_dev, 0x1d, 0x00, 0);
- reg_w_riv(gspca_dev, 0, 0x01, 0x2306);
- reg_w_riv(gspca_dev, 0, 0x00, 0x0d04);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2000);
- reg_w_riv(gspca_dev, 0, 0x13, 0x2301);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2306);
+ reg_w_riv(gspca_dev, 0x00, 0x2306, 0x01);
+ reg_w_riv(gspca_dev, 0x00, 0x0d04, 0x00);
+ reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
+ reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
+ reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
/* fall thru */
case BRIDGE_SPCA533:
spca504B_PollingDataReady(gspca_dev);
spca504B_WaitCmdStatus(gspca_dev);
break;
default:
- reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+ reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
int l;
frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
l = frame->data_end - frame->data;
if (len > frame->v4l2_buf.length - l)
len = frame->v4l2_buf.length - l;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || (int)irq <= 0) {
err = -ENODEV;
goto exit;
}
struct i2c_client *client = sd->priv;
struct rj54n1 *rj54n1 = to_rj54n1(client);
struct v4l2_rect *rect = &a->c;
- unsigned int dummy, output_w, output_h,
+ unsigned int dummy = 0, output_w, output_h,
input_w = rect->width, input_h = rect->height;
int ret;
ctrl |= SAA7134_MAIN_CTRL_TE5;
irq |= SAA7134_IRQ1_INTE_RA2_1 |
SAA7134_IRQ1_INTE_RA2_0;
-
- /* dma: setup channel 5 (= TS) */
-
- saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
- saa_writeb(SAA7134_TS_DMA1,
- ((dev->ts.nr_packets - 1) >> 8) & 0xff);
- /* TSNOPIT=0, TSCOLAP=0 */
- saa_writeb(SAA7134_TS_DMA2,
- (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
- saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
- saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
- SAA7134_RS_CONTROL_ME |
- (dev->ts.pt_ts.dma >> 12));
}
/* set task conditions + field handling */
BUG_ON(dev->ts_started);
+ /* dma: setup channel 5 (= TS) */
+ saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
+ saa_writeb(SAA7134_TS_DMA1,
+ ((dev->ts.nr_packets - 1) >> 8) & 0xff);
+ /* TSNOPIT=0, TSCOLAP=0 */
+ saa_writeb(SAA7134_TS_DMA2,
+ (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
+ saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
+ saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
+ SAA7134_RS_CONTROL_ME |
+ (dev->ts.pt_ts.dma >> 12));
+
+ /* reset hardware TS buffers */
saa_writeb(SAA7134_TS_SERIAL1, 0x00);
saa_writeb(SAA7134_TS_SERIAL1, 0x03);
saa_writeb(SAA7134_TS_SERIAL1, 0x00);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || (int)irq <= 0) {
dev_err(&pdev->dev, "Not enough CEU platform resources.\n");
err = -ENODEV;
goto exit;
size = entity->processing.bControlSize;
for (i = 0; i < ARRAY_SIZE(blacklist); ++i) {
- if (!usb_match_id(dev->intf, &blacklist[i].id))
+ if (!usb_match_one_id(dev->intf, &blacklist[i].id))
continue;
if (blacklist[i].index >= 8 * size ||
* returns immediately.
*
* When the buffer is full, the completion handler removes it from the irq
- * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
+ * queue, marks it as done (UVC_BUF_STATE_DONE) and wakes its wait queue.
* At that point, any process waiting on the buffer will be woken up. If a
- * process tries to dequeue a buffer after it has been marked ready, the
+ * process tries to dequeue a buffer after it has been marked done, the
* dequeing will succeed immediately.
*
* 2. Buffers are queued, user is waiting on a buffer and the device gets
break;
case UVC_BUF_STATE_QUEUED:
case UVC_BUF_STATE_ACTIVE:
+ case UVC_BUF_STATE_READY:
v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
break;
case UVC_BUF_STATE_IDLE:
{
if (nonblocking) {
return (buf->state != UVC_BUF_STATE_QUEUED &&
- buf->state != UVC_BUF_STATE_ACTIVE)
+ buf->state != UVC_BUF_STATE_ACTIVE &&
+ buf->state != UVC_BUF_STATE_READY)
? 0 : -EAGAIN;
}
return wait_event_interruptible(buf->wait,
buf->state != UVC_BUF_STATE_QUEUED &&
- buf->state != UVC_BUF_STATE_ACTIVE);
+ buf->state != UVC_BUF_STATE_ACTIVE &&
+ buf->state != UVC_BUF_STATE_READY);
}
/*
case UVC_BUF_STATE_IDLE:
case UVC_BUF_STATE_QUEUED:
case UVC_BUF_STATE_ACTIVE:
+ case UVC_BUF_STATE_READY:
default:
uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
"(driver bug?).\n", buf->state);
spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
+ buf->state = UVC_BUF_STATE_DONE;
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
queue);
if (fid != stream->last_fid && buf->buf.bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
"toggled).\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
return -EAGAIN;
}
/* Complete the current frame if the buffer size was exceeded. */
if (len > maxlen) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
}
}
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
if (data[0] == len)
uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
stream->last_fid ^= UVC_STREAM_FID;
}
uvc_video_decode_end(stream, buf, mem,
urb->iso_frame_desc[i].actual_length);
- if (buf->state == UVC_BUF_STATE_DONE ||
- buf->state == UVC_BUF_STATE_ERROR)
+ if (buf->state == UVC_BUF_STATE_READY)
buf = uvc_queue_next_buffer(&stream->queue, buf);
}
}
if (!stream->bulk.skip_payload && buf != NULL) {
uvc_video_decode_end(stream, buf, stream->bulk.header,
stream->bulk.payload_size);
- if (buf->state == UVC_BUF_STATE_DONE ||
- buf->state == UVC_BUF_STATE_ERROR)
+ if (buf->state == UVC_BUF_STATE_READY)
buf = uvc_queue_next_buffer(&stream->queue,
buf);
}
stream->bulk.payload_size == stream->bulk.max_payload_size) {
if (buf->buf.bytesused == stream->queue.buf_used) {
stream->queue.buf_used = 0;
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
uvc_queue_next_buffer(&stream->queue, buf);
stream->last_fid ^= UVC_STREAM_FID;
}
static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
{
struct usb_interface *intf = stream->intf;
- struct usb_host_interface *alts;
- struct usb_host_endpoint *ep = NULL;
- int intfnum = stream->intfnum;
- unsigned int bandwidth, psize, i;
+ struct usb_host_endpoint *ep;
+ unsigned int i;
int ret;
stream->last_fid = -1;
stream->bulk.payload_size = 0;
if (intf->num_altsetting > 1) {
+ struct usb_host_endpoint *best_ep = NULL;
+ unsigned int best_psize = 3 * 1024;
+ unsigned int bandwidth;
+ unsigned int uninitialized_var(altsetting);
+ int intfnum = stream->intfnum;
+
/* Isochronous endpoint, select the alternate setting. */
bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
}
for (i = 0; i < intf->num_altsetting; ++i) {
+ struct usb_host_interface *alts;
+ unsigned int psize;
+
alts = &intf->altsetting[i];
ep = uvc_find_endpoint(alts,
stream->header.bEndpointAddress);
/* Check if the bandwidth is high enough. */
psize = le16_to_cpu(ep->desc.wMaxPacketSize);
psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
- if (psize >= bandwidth)
- break;
+ if (psize >= bandwidth && psize <= best_psize) {
+ altsetting = i;
+ best_psize = psize;
+ best_ep = ep;
+ }
}
- if (i >= intf->num_altsetting) {
+ if (best_ep == NULL) {
uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
"for requested bandwidth.\n");
return -EIO;
}
- ret = usb_set_interface(stream->dev->udev, intfnum, i);
+ uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
+ "(%u B/frame bandwidth).\n", altsetting, best_psize);
+
+ ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
if (ret < 0)
return ret;
- ret = uvc_init_video_isoc(stream, ep, gfp_flags);
+ ret = uvc_init_video_isoc(stream, best_ep, gfp_flags);
} else {
/* Bulk endpoint, proceed to URB initialization. */
ep = uvc_find_endpoint(&intf->altsetting[0],
UVC_BUF_STATE_IDLE = 0,
UVC_BUF_STATE_QUEUED = 1,
UVC_BUF_STATE_ACTIVE = 2,
- UVC_BUF_STATE_DONE = 3,
- UVC_BUF_STATE_ERROR = 4,
+ UVC_BUF_STATE_READY = 3,
+ UVC_BUF_STATE_DONE = 4,
+ UVC_BUF_STATE_ERROR = 5,
};
struct uvc_buffer {
if (ioc->bus_type == SPI)
num_chain *= MPT_SCSI_CAN_QUEUE;
+ else if (ioc->bus_type == SAS)
+ num_chain *= MPT_SAS_CAN_QUEUE;
else
num_chain *= MPT_FC_CAN_QUEUE;
#define SG_TABLESIZE 30
-static int i2o_cfg_ioctl(struct inode *, struct file *, unsigned int,
- unsigned long);
+static long i2o_cfg_ioctl(struct file *, unsigned int, unsigned long);
static spinlock_t i2o_config_lock;
lock_kernel();
switch (cmd) {
case I2OGETIOPS:
- ret = i2o_cfg_ioctl(NULL, file, cmd, arg);
+ ret = i2o_cfg_ioctl(file, cmd, arg);
break;
case I2OPASSTHRU32:
ret = i2o_cfg_passthru32(file, cmd, arg);
/*
* IOCTL Handler
*/
-static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
- unsigned long arg)
+static long i2o_cfg_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
{
int ret;
+ lock_kernel();
switch (cmd) {
case I2OGETIOPS:
ret = i2o_cfg_getiops(arg);
osm_debug("unknown ioctl called!\n");
ret = -EINVAL;
}
-
+ unlock_kernel();
return ret;
}
static const struct file_operations config_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = i2o_cfg_ioctl,
+ .unlocked_ioctl = i2o_cfg_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = i2o_cfg_compat_ioctl,
#endif
#
obj-$(CONFIG_MFD_SM501) += sm501.o
-obj-$(CONFIG_MFD_ASIC3) += asic3.o
+obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
-obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o
-obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
-obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
+obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
u16 irq_bothedge[4];
struct gpio_chip gpio;
struct device *dev;
+ void __iomem *tmio_cnf;
struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
};
.resources = ds1wm_resources,
};
+static void asic3_mmc_pwr(struct platform_device *pdev, int state)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
+static void asic3_mmc_clk_div(struct platform_device *pdev, int state)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
static struct tmio_mmc_data asic3_mmc_data = {
- .hclk = 24576000,
+ .hclk = 24576000,
+ .set_pwr = asic3_mmc_pwr,
+ .set_clk_div = asic3_mmc_clk_div,
};
static struct resource asic3_mmc_resources[] = {
.end = ASIC3_SD_CTRL_BASE + 0x3ff,
.flags = IORESOURCE_MEM,
},
- {
- .start = ASIC3_SD_CONFIG_BASE,
- .end = ASIC3_SD_CONFIG_BASE + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
{
.start = 0,
.end = 0,
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_SDPWR, 1);
+ /* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */
+ tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift,
+ ASIC3_SD_CTRL_BASE >> 1);
+
return 0;
}
asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
/* MMC */
+ asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
+ mem_sdio->start, 0x400 >> asic->bus_shift);
+ if (!asic->tmio_cnf) {
+ ret = -ENOMEM;
+ dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");
+ goto out;
+ }
asic3_mmc_resources[0].start >>= asic->bus_shift;
asic3_mmc_resources[0].end >>= asic->bus_shift;
- asic3_mmc_resources[1].start >>= asic->bus_shift;
- asic3_mmc_resources[1].end >>= asic->bus_shift;
asic3_cell_mmc.platform_data = &asic3_cell_mmc;
asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
static void asic3_mfd_remove(struct platform_device *pdev)
{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
mfd_remove_devices(&pdev->dev);
+ iounmap(asic->tmio_cnf);
}
/* Core */
}
/* This should go away (END) */
+ mc13783_unlock(mc13783);
+
if (pdata->flags & MC13783_USE_ADC)
mc13783_add_subdevice(mc13783, "mc13783-adc");
if (pdata->flags & MC13783_USE_TOUCHSCREEN)
mc13783_add_subdevice(mc13783, "mc13783-ts");
- mc13783_unlock(mc13783);
-
return 0;
}
T7L66XB_CELL_MMC,
};
+static const struct resource t7l66xb_mmc_resources[] = {
+ {
+ .start = 0x800,
+ .end = 0x9ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_T7L66XB_MMC,
+ .end = IRQ_T7L66XB_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
#define SCR_REVID 0x08 /* b Revision ID */
#define SCR_IMR 0x42 /* b Interrupt Mask */
#define SCR_DEV_CTL 0xe0 /* b Device control */
spin_unlock_irqrestore(&t7l66xb->lock, flags);
+ tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+ t7l66xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
return 0;
}
+static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state);
+}
+
+static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state);
+}
+
/*--------------------------------------------------------------------------*/
static struct tmio_mmc_data t7166xb_mmc_data = {
.hclk = 24000000,
-};
-
-static const struct resource t7l66xb_mmc_resources[] = {
- {
- .start = 0x800,
- .end = 0x9ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_T7L66XB_MMC,
- .end = IRQ_T7L66XB_MMC,
- .flags = IORESOURCE_IRQ,
- },
+ .set_pwr = t7l66xb_mmc_pwr,
+ .set_clk_div = t7l66xb_mmc_clk_div,
};
static const struct resource t7l66xb_nand_resources[] = {
if (pdata && pdata->resume)
pdata->resume(dev);
+ tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+ t7l66xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
#else
TC6387XB_CELL_MMC,
};
+struct tc6387xb {
+ void __iomem *scr;
+ struct clk *clk32k;
+ struct resource rscr;
+};
+
+static struct resource tc6387xb_mmc_resources[] = {
+ {
+ .start = 0x800,
+ .end = 0x9ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*--------------------------------------------------------------------------*/
+
#ifdef CONFIG_PM
static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(clk32k);
+ clk_disable(tc6387xb->clk32k);
return 0;
}
static int tc6387xb_resume(struct platform_device *dev)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
- clk_enable(clk32k);
+ clk_enable(tc6387xb->clk32k);
if (pdata && pdata->resume)
pdata->resume(dev);
+ tmio_core_mmc_resume(tc6387xb->scr + 0x200, 0,
+ tc6387xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
#else
/*--------------------------------------------------------------------------*/
+static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state);
+}
+
+static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state);
+}
+
+
static int tc6387xb_mmc_enable(struct platform_device *mmc)
{
struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_enable(clk32k);
+ clk_enable(tc6387xb->clk32k);
+
+ tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
+ tc6387xb_mmc_resources[0].start & 0xfffe);
return 0;
}
static int tc6387xb_mmc_disable(struct platform_device *mmc)
{
struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_disable(clk32k);
+ clk_disable(tc6387xb->clk32k);
return 0;
}
-/*--------------------------------------------------------------------------*/
-
static struct tmio_mmc_data tc6387xb_mmc_data = {
.hclk = 24000000,
+ .set_pwr = tc6387xb_mmc_pwr,
+ .set_clk_div = tc6387xb_mmc_clk_div,
};
-static struct resource tc6387xb_mmc_resources[] = {
- {
- .start = 0x800,
- .end = 0x9ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
+/*--------------------------------------------------------------------------*/
static struct mfd_cell tc6387xb_cells[] = {
[TC6387XB_CELL_MMC] = {
static int tc6387xb_probe(struct platform_device *dev)
{
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
- struct resource *iomem;
+ struct resource *iomem, *rscr;
struct clk *clk32k;
+ struct tc6387xb *tc6387xb;
int irq, ret;
iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
return -EINVAL;
}
+ tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL);
+ if (!tc6387xb)
+ return -ENOMEM;
+
ret = platform_get_irq(dev, 0);
if (ret >= 0)
irq = ret;
else
- goto err_resource;
+ goto err_no_irq;
clk32k = clk_get(&dev->dev, "CLK_CK32K");
if (IS_ERR(clk32k)) {
ret = PTR_ERR(clk32k);
+ goto err_no_clk;
+ }
+
+ rscr = &tc6387xb->rscr;
+ rscr->name = "tc6387xb-core";
+ rscr->start = iomem->start;
+ rscr->end = iomem->start + 0xff;
+ rscr->flags = IORESOURCE_MEM;
+
+ ret = request_resource(iomem, rscr);
+ if (ret)
goto err_resource;
+
+ tc6387xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+ if (!tc6387xb->scr) {
+ ret = -ENOMEM;
+ goto err_ioremap;
}
- platform_set_drvdata(dev, clk32k);
+
+ tc6387xb->clk32k = clk32k;
+ platform_set_drvdata(dev, tc6387xb);
if (pdata && pdata->enable)
pdata->enable(dev);
if (!ret)
return 0;
- clk_put(clk32k);
+err_ioremap:
+ release_resource(&tc6387xb->rscr);
err_resource:
+ clk_put(clk32k);
+err_no_clk:
+err_no_irq:
+ kfree(tc6387xb);
return ret;
}
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Ian Molton");
MODULE_ALIAS("platform:tc6387xb");
+
return 0;
}
-static struct tmio_mmc_data tc6393xb_mmc_data = {
- .hclk = 24000000,
-};
-
static struct resource __devinitdata tc6393xb_nand_resources[] = {
{
.start = 0x1000,
.end = 0x9ff,
.flags = IORESOURCE_MEM,
},
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
{
.start = IRQ_TC6393_MMC,
.end = IRQ_TC6393_MMC,
}
EXPORT_SYMBOL(tc6393xb_lcd_mode);
+static int tc6393xb_mmc_enable(struct platform_device *mmc)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0,
+ tc6393xb_mmc_resources[0].start & 0xfffe);
+
+ return 0;
+}
+
+static int tc6393xb_mmc_resume(struct platform_device *mmc)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0,
+ tc6393xb_mmc_resources[0].start & 0xfffe);
+
+ return 0;
+}
+
+static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state);
+}
+
+static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state);
+}
+
+static struct tmio_mmc_data tc6393xb_mmc_data = {
+ .hclk = 24000000,
+ .set_pwr = tc6393xb_mmc_pwr,
+ .set_clk_div = tc6393xb_mmc_clk_div,
+};
+
static struct mfd_cell __devinitdata tc6393xb_cells[] = {
[TC6393XB_CELL_NAND] = {
.name = "tmio-nand",
},
[TC6393XB_CELL_MMC] = {
.name = "tmio-mmc",
+ .enable = tc6393xb_mmc_enable,
+ .resume = tc6393xb_mmc_resume,
.driver_data = &tc6393xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
.resources = tc6393xb_mmc_resources,
MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
MODULE_ALIAS("platform:tc6393xb");
+
--- /dev/null
+/*
+ * Copyright(c) 2009 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/tmio.h>
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
+{
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+ sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+ /* Disable SD power during suspend */
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01);
+
+ /* The below is required but why? FIXME */
+ sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f);
+
+ /* Power down SD bus */
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00);
+
+ return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_enable);
+
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base)
+{
+
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+ sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+ return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_resume);
+
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state)
+{
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00);
+}
+EXPORT_SYMBOL(tmio_core_mmc_pwr);
+
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state)
+{
+ sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0);
+}
+EXPORT_SYMBOL(tmio_core_mmc_clk_div);
+
bytes[byte] &= ~(0x03 << off);
- spin_lock_irq(&d->lock);
+ raw_spin_lock_irq(&d->lock);
if (d->status & IRQ_TYPE_EDGE_RISING)
bytes[byte] |= BIT(off + 1);
if (d->status & IRQ_TYPE_EDGE_FALLING)
bytes[byte] |= BIT(off + 0);
- spin_unlock_irq(&d->lock);
+ raw_spin_unlock_irq(&d->lock);
edge_change &= ~BIT(i);
}
wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
return 0;
- if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
- (reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
+ if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
irq_handler_t handler, unsigned long flags,
const char *name, void *data)
{
- if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
+ if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler)
return -EINVAL;
if (wm8350->irq[irq].handler)
int wm8350_free_irq(struct wm8350 *wm8350, int irq)
{
- if (irq < 0 || irq > WM8350_NUM_IRQ)
+ if (irq < 0 || irq >= WM8350_NUM_IRQ)
return -EINVAL;
wm8350_mask_irq(wm8350, irq);
mutex_lock(&open_lock);
md->usage--;
if (md->usage == 0) {
+ int devmaj = MAJOR(disk_devt(md->disk));
int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT;
+
+ if (!devmaj)
+ devidx = md->disk->first_minor >> MMC_SHIFT;
+
+ blk_cleanup_queue(md->queue.queue);
+
__clear_bit(devidx, dev_use);
put_disk(md->disk);
return 0;
out:
+ mmc_cleanup_queue(&md->queue);
mmc_blk_put(md);
return err;
struct request *req;
if (!mq) {
- printk(KERN_ERR "MMC: killing requests for dead queue\n");
- while ((req = blk_fetch_request(q)) != NULL)
+ while ((req = blk_fetch_request(q)) != NULL) {
+ req->cmd_flags |= REQ_QUIET;
__blk_end_request_all(req, -EIO);
+ }
return;
}
struct request_queue *q = mq->queue;
unsigned long flags;
- /* Mark that we should start throwing out stragglers */
- spin_lock_irqsave(q->queue_lock, flags);
- q->queuedata = NULL;
- spin_unlock_irqrestore(q->queue_lock, flags);
-
/* Make sure the queue isn't suspended, as that will deadlock */
mmc_queue_resume(mq);
/* Then terminate our worker thread */
kthread_stop(mq->thread);
+ /* Empty the queue */
+ spin_lock_irqsave(q->queue_lock, flags);
+ q->queuedata = NULL;
+ blk_start_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
if (mq->bounce_sg)
kfree(mq->bounce_sg);
mq->bounce_sg = NULL;
kfree(mq->bounce_buf);
mq->bounce_buf = NULL;
- blk_cleanup_queue(mq->queue);
-
mq->card = NULL;
}
EXPORT_SYMBOL(mmc_cleanup_queue);
}
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
- if (card->ext_csd.rev > 3) {
+ if (card->ext_csd.rev > 5) {
printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
card->ext_csd.rev);
clk |= 0x100;
}
- sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+ if (host->set_clk_div)
+ host->set_clk_div(host->pdev, (clk>>22) & 1);
+
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}
/* Power sequence - OFF -> ON -> UP */
switch (ios->power_mode) {
case MMC_POWER_OFF: /* power down SD bus */
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 0);
tmio_mmc_clk_stop(host);
break;
case MMC_POWER_ON: /* power up SD bus */
-
- sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 1);
break;
case MMC_POWER_UP: /* start bus clock */
tmio_mmc_clk_start(host);
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct mmc_host *mmc = platform_get_drvdata(dev);
- struct tmio_mmc_host *host = mmc_priv(mmc);
int ret = 0;
/* Tell the MFD core we are ready to be enabled */
- if (cell->enable) {
- ret = cell->enable(dev);
+ if (cell->resume) {
+ ret = cell->resume(dev);
if (ret)
goto out;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
mmc_resume_host(mmc);
out:
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct tmio_mmc_data *pdata;
- struct resource *res_ctl, *res_cnf;
+ struct resource *res_ctl;
struct tmio_mmc_host *host;
struct mmc_host *mmc;
int ret = -EINVAL;
- if (dev->num_resources != 3)
+ if (dev->num_resources != 2)
goto out;
res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
- res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
- if (!res_ctl || !res_cnf)
+ if (!res_ctl)
goto out;
pdata = cell->driver_data;
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->pdev = dev;
platform_set_drvdata(dev, mmc);
+ host->set_pwr = pdata->set_pwr;
+ host->set_clk_div = pdata->set_clk_div;
+
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
host->bus_shift = resource_size(res_ctl) >> 10;
if (!host->ctl)
goto host_free;
- host->cnf = ioremap(res_cnf->start, resource_size(res_cnf));
- if (!host->cnf)
- goto unmap_ctl;
-
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA;
mmc->f_max = pdata->hclk;
if (cell->enable) {
ret = cell->enable(dev);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
- /* Disable SD power during suspend */
- sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
-
- /* The below is required but why? FIXME */
- sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
-
- /* Power down SD bus*/
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
-
tmio_mmc_clk_stop(host);
reset(host);
if (ret >= 0)
host->irq = ret;
else
- goto unmap_cnf;
+ goto unmap_ctl;
disable_mmc_irqs(host, TMIO_MASK_ALL);
ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
mmc_add_host(mmc);
return 0;
-unmap_cnf:
- iounmap(host->cnf);
unmap_ctl:
iounmap(host->ctl);
host_free:
mmc_remove_host(mmc);
free_irq(host->irq, host);
iounmap(host->ctl);
- iounmap(host->cnf);
mmc_free_host(mmc);
}
#include <linux/highmem.h>
-#define CNF_CMD 0x04
-#define CNF_CTL_BASE 0x10
-#define CNF_INT_PIN 0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
#define CTL_SD_CMD 0x00
#define CTL_ARG_REG 0x04
#define CTL_STOP_INTERNAL_ACTION 0x08
struct tmio_mmc_host {
- void __iomem *cnf;
void __iomem *ctl;
unsigned long bus_shift;
struct mmc_command *cmd;
struct mmc_host *mmc;
int irq;
+ /* Callbacks for clock / power control */
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
+
/* pio related stuff */
struct scatterlist *sg_ptr;
unsigned int sg_len;
unsigned int sg_off;
+
+ struct platform_device *pdev;
};
#include <linux/io.h>
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
-static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
- u8 val)
-{
- writeb(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
- u16 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
- u32 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
- writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
-}
-
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
To build this as a module select M here, the module will be called
vmu-flash.
+config MTD_PISMO
+ tristate "MTD discovery driver for PISMO modules"
+ depends on I2C
+ depends on ARCH_VERSATILE
+ help
+ This driver allows for discovery of PISMO modules - see
+ <http://www.pismoworld.org/>. These are small modules containing
+ up to five memory devices (eg, SRAM, flash, DOC) described by an
+ I2C EEPROM.
+
+ This driver does not create any MTD maps itself; instead it
+ creates MTD physmap and MTD SRAM platform devices. If you
+ enable this option, you should consider enabling MTD_PHYSMAP
+ and/or MTD_PLATRAM according to the devices on your module.
+
+ When built as a module, it will be called pismo.ko
+
endmenu
--- /dev/null
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * For ARM Realview and Versatile platforms
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/pismo.h>
+
+#define PISMO_NUM_CS 5
+
+struct pismo_cs_block {
+ u8 type;
+ u8 width;
+ __le16 access;
+ __le32 size;
+ u32 reserved[2];
+ char device[32];
+} __packed;
+
+struct pismo_eeprom {
+ struct pismo_cs_block cs[PISMO_NUM_CS];
+ char board[15];
+ u8 sum;
+} __packed;
+
+struct pismo_mem {
+ phys_addr_t base;
+ u32 size;
+ u16 access;
+ u8 width;
+ u8 type;
+};
+
+struct pismo_data {
+ struct i2c_client *client;
+ void (*vpp)(void *, int);
+ void *vpp_data;
+ struct platform_device *dev[PISMO_NUM_CS];
+};
+
+/* FIXME: set_vpp could do with a better calling convention */
+static struct pismo_data *vpp_pismo;
+static DEFINE_MUTEX(pismo_mutex);
+
+static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+{
+ mutex_lock(&pismo_mutex);
+ if (vpp_pismo) {
+ mutex_unlock(&pismo_mutex);
+ kfree(pismo);
+ return -EBUSY;
+ }
+ vpp_pismo = pismo;
+ mutex_unlock(&pismo_mutex);
+ return 0;
+}
+
+static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
+{
+ mutex_lock(&pismo_mutex);
+ if (vpp_pismo == pismo)
+ vpp_pismo = NULL;
+ mutex_unlock(&pismo_mutex);
+}
+
+static void pismo_set_vpp(struct map_info *map, int on)
+{
+ struct pismo_data *pismo = vpp_pismo;
+
+ pismo->vpp(pismo->vpp_data, on);
+}
+/* end of hack */
+
+
+static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
+{
+ width &= 15;
+ if (width > 2)
+ return 0;
+ return 1 << width;
+}
+
+static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf,
+ u8 addr, size_t size)
+{
+ int ret;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .len = sizeof(addr),
+ .buf = &addr,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = size,
+ .buf = buf,
+ },
+ };
+
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+
+ return ret == ARRAY_SIZE(msg) ? size : -EIO;
+}
+
+static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
+ struct pismo_mem *region, const char *name, void *pdata, size_t psize)
+{
+ struct platform_device *dev;
+ struct resource res = { };
+ phys_addr_t base = region.base;
+ int ret;
+
+ if (base == ~0)
+ return -ENXIO;
+
+ res.start = base;
+ res.end = base + region->size - 1;
+ res.flags = IORESOURCE_MEM;
+
+ dev = platform_device_alloc(name, i);
+ if (!dev)
+ return -ENOMEM;
+ dev->dev.parent = &pismo->client->dev;
+
+ do {
+ ret = platform_device_add_resources(dev, &res, 1);
+ if (ret)
+ break;
+
+ ret = platform_device_add_data(dev, pdata, psize);
+ if (ret)
+ break;
+
+ ret = platform_device_add(dev);
+ if (ret)
+ break;
+
+ pismo->dev[i] = dev;
+ return 0;
+ } while (0);
+
+ platform_device_put(dev);
+ return ret;
+}
+
+static int __devinit pismo_add_nor(struct pismo_data *pismo, int i,
+ struct pismo_mem *region)
+{
+ struct physmap_flash_data data = {
+ .width = region->width,
+ };
+
+ if (pismo->vpp)
+ data.set_vpp = pismo_set_vpp;
+
+ return pismo_add_device(pismo, i, region, "physmap-flash",
+ &data, sizeof(data));
+}
+
+static int __devinit pismo_add_sram(struct pismo_data *pismo, int i,
+ struct pismo_mem *region)
+{
+ struct platdata_mtd_ram data = {
+ .bankwidth = region->width,
+ };
+
+ return pismo_add_device(pismo, i, region, "mtd-ram",
+ &data, sizeof(data));
+}
+
+static void __devinit pismo_add_one(struct pismo_data *pismo, int i,
+ const struct pismo_cs_block *cs, phys_addr_t base)
+{
+ struct device *dev = &pismo->client->dev;
+ struct pismo_mem region;
+
+ region.base = base;
+ region.type = cs->type;
+ region.width = pismo_width_to_bytes(cs->width);
+ region.access = le16_to_cpu(cs->access);
+ region.size = le32_to_cpu(cs->size);
+
+ if (region.width == 0) {
+ dev_err(dev, "cs%u: bad width: %02x, ignoring\n", i, cs->width);
+ return;
+ }
+
+ /*
+ * FIXME: may need to the platforms memory controller here, but at
+ * the moment we assume that it has already been correctly setup.
+ * The memory controller can also tell us the base address as well.
+ */
+
+ dev_info(dev, "cs%u: %.32s: type %02x access %u00ps size %uK\n",
+ i, cs->device, region.type, region.access, region.size / 1024);
+
+ switch (region.type) {
+ case 0:
+ break;
+ case 1:
+ /* static DOC */
+ break;
+ case 2:
+ /* static NOR */
+ pismo_add_nor(pismo, i, ®ion);
+ break;
+ case 3:
+ /* static RAM */
+ pismo_add_sram(pismo, i, ®ion);
+ break;
+ }
+}
+
+static int __devexit pismo_remove(struct i2c_client *client)
+{
+ struct pismo_data *pismo = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
+ platform_device_unregister(pismo->dev[i]);
+
+ /* FIXME: set_vpp needs saner arguments */
+ pismo_setvpp_remove_fix(pismo);
+
+ kfree(pismo);
+
+ return 0;
+}
+
+static int __devinit pismo_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct pismo_pdata *pdata = client->dev.platform_data;
+ struct pismo_eeprom eeprom;
+ struct pismo_data *pismo;
+ int ret, i;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "functionality mismatch\n");
+ return -EIO;
+ }
+
+ pismo = kzalloc(sizeof(*pismo), GFP_KERNEL);
+ if (!pismo)
+ return -ENOMEM;
+
+ /* FIXME: set_vpp needs saner arguments */
+ ret = pismo_setvpp_probe_fix(pismo);
+ if (ret)
+ return ret;
+
+ pismo->client = client;
+ if (pdata) {
+ pismo->vpp = pdata->set_vpp;
+ pismo->vpp_data = pdata->vpp_data;
+ }
+ i2c_set_clientdata(client, pismo);
+
+ ret = pismo_eeprom_read(client, &eeprom, 0, sizeof(eeprom));
+ if (ret < 0) {
+ dev_err(&client->dev, "error reading EEPROM: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(&client->dev, "%.15s board found\n", eeprom.board);
+
+ for (i = 0; i < ARRAY_SIZE(eeprom.cs); i++)
+ if (eeprom.cs[i].type != 0xff)
+ pismo_add_one(pismo, i, &eeprom.cs[i],
+ pdata->cs_addrs[i]);
+
+ return 0;
+}
+
+static const struct i2c_device_id pismo_id[] = {
+ { "pismo" },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, pismo_id);
+
+static struct i2c_driver pismo_driver = {
+ .driver = {
+ .name = "pismo",
+ .owner = THIS_MODULE,
+ },
+ .probe = pismo_probe,
+ .remove = __devexit_p(pismo_remove),
+ .id_table = pismo_id,
+};
+
+static int __init pismo_init(void)
+{
+ BUILD_BUG_ON(sizeof(struct pismo_cs_block) != 48);
+ BUILD_BUG_ON(sizeof(struct pismo_eeprom) != 256);
+
+ return i2c_add_driver(&pismo_driver);
+}
+module_init(pismo_init);
+
+static void __exit pismo_exit(void)
+{
+ i2c_del_driver(&pismo_driver);
+}
+module_exit(pismo_exit);
+
+MODULE_AUTHOR("Russell King <linux@arm.linux.org.uk>");
+MODULE_DESCRIPTION("PISMO memory driver");
+MODULE_LICENSE("GPL");
memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
/* Panics must be written immediately */
- if (reason == KMSG_DUMP_PANIC) {
+ if (reason != KMSG_DUMP_OOPS) {
if (!cxt->mtd->panic_write)
printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n");
else
}
memset(bbt, 0 , ebcnt);
+ /* NOR flash does not implement block_isbad */
+ if (mtd->block_isbad == NULL)
+ return 0;
+
printk(PRINT_PREF "scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
- pgcnt = mtd->erasesize / mtd->writesize;
+ pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
}
memset(bbt, 0 , ebcnt);
+ /* NOR flash does not implement block_isbad */
+ if (mtd->block_isbad == NULL)
+ goto out;
+
printk(PRINT_PREF "scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
cond_resched();
}
printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+out:
goodebcnt = ebcnt - bad;
return 0;
}
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
- pgcnt = mtd->erasesize / mtd->writesize;
+ pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
}
memset(bbt, 0 , ebcnt);
+ /* NOR flash does not implement block_isbad */
+ if (mtd->block_isbad == NULL)
+ return 0;
+
printk(PRINT_PREF "scanning for bad eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
bbt[i] = is_block_bad(i) ? 1 : 0;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
- pgcnt = mtd->erasesize / mtd->writesize;
+ pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
break;
}
- req.name[req.name_len] = '\0';
err = verify_mkvol_req(ubi, &req);
if (err)
break;
*/
struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode)
{
- int error, ubi_num, vol_id;
- struct ubi_volume_desc *ret;
+ int error, ubi_num, vol_id, mod;
struct inode *inode;
struct path path;
return ERR_PTR(error);
inode = path.dentry->d_inode;
+ mod = inode->i_mode;
ubi_num = ubi_major2num(imajor(inode));
vol_id = iminor(inode) - 1;
+ path_put(&path);
+ if (!S_ISCHR(mod))
+ return ERR_PTR(-EINVAL);
if (vol_id >= 0 && ubi_num >= 0)
- ret = ubi_open_volume(ubi_num, vol_id, mode);
- else
- ret = ERR_PTR(-ENODEV);
-
- path_put(&path);
- return ret;
+ return ubi_open_volume(ubi_num, vol_id, mode);
+ return ERR_PTR(-ENODEV);
}
EXPORT_SYMBOL_GPL(ubi_open_volume_path);
if (err)
return err;
vol->updating = 0;
+ return 0;
}
vol->upd_buf = vmalloc(ubi->leb_size);
vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
vol->alignment = be32_to_cpu(vtbl[i].alignment);
vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
+ vol->upd_marker = vtbl[i].upd_marker;
vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
vol->name_len = be16_to_cpu(vtbl[i].name_len);
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/init.h>
memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10);
/* Fill in the station address. */
- memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr,
- sizeof(dev->dev_addr));
+ memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN);
/* The Tx-block list is written as needed. We just set up the values. */
lp->tx_cmd_link = IDLELOOP + 4;
config GELIC_WIRELESS
bool "PS3 Wireless support"
+ depends on WLAN
depends on GELIC_NET
select WIRELESS_EXT
help
config GELIC_WIRELESS_OLD_PSK_INTERFACE
bool "PS3 Wireless private PSK interface (OBSOLETE)"
depends on GELIC_WIRELESS
+ select WEXT_PRIV
help
This option retains the obsolete private interface to pass
the PSK from user space programs to the driver. The PSK
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
select PHYLIB
+ select MII
help
Say Y here if you want to use built-in Ethernet ports
on w90p910 processor.
while (--i > 0)
if (DREG & CSR0_IDON)
break;
- if (i < 0 || (DREG & CSR0_ERR)) {
+ if (i <= 0 || (DREG & CSR0_ERR)) {
DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
dev->name, i, DREG ));
DREG = CSR0_STOP;
return -ENOMEM;
for (i = first_dword; i < last_dword; i++) {
- if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword])))
- return -EIO;
+ if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) {
+ ret_val = -EIO;
+ goto free;
+ }
}
memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
eeprom->len);
+free:
kfree(eeprom_buff);
return ret_val;
u32 tx_fc; /* Tx flow control */
int link_speed;
u8 port_type;
+ u8 transceiver;
};
extern const struct ethtool_ops be_ethtool_ops;
MCC_WRB_SGE_CNT_SHIFT;
wrb->payload_length = payload_len;
wrb->tag0 = opcode;
- be_dws_cpu_to_le(wrb, 20);
+ be_dws_cpu_to_le(wrb, 8);
}
/* Don't touch the hdr after it's prepared */
return status;
}
+int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+ u8 loopback_type, u8 enable)
+{
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_set_lmode *req;
+ int status;
+
+ spin_lock_bh(&adapter->mcc_lock);
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
+
+ req = embedded_payload(wrb);
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE,
+ sizeof(*req));
+
+ req->src_port = port_num;
+ req->dest_port = port_num;
+ req->loopback_type = loopback_type;
+ req->loopback_state = enable;
+
+ status = be_mcc_notify_wait(adapter);
+err:
+ spin_unlock_bh(&adapter->mcc_lock);
+ return status;
+}
+
int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern)
{
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req));
+ req->hdr.timeout = 4;
req->pattern = cpu_to_le64(pattern);
req->src_port = cpu_to_le32(port_num);
#define OPCODE_LOWLEVEL_HOST_DDR_DMA 17
#define OPCODE_LOWLEVEL_LOOPBACK_TEST 18
+#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19
struct be_cmd_req_hdr {
u8 opcode; /* dword 0 */
u32 ticks_compl;
};
+struct be_cmd_req_set_lmode {
+ struct be_cmd_req_hdr hdr;
+ u8 src_port;
+ u8 dest_port;
+ u8 loopback_type;
+ u8 loopback_state;
+};
+
+struct be_cmd_resp_set_lmode {
+ struct be_cmd_resp_hdr resp_hdr;
+ u8 rsvd0[4];
+};
+
/********************** DDR DMA test *********************/
struct be_cmd_req_ddrdma_test {
struct be_cmd_req_hdr hdr;
u32 num_pkts, u64 pattern);
extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
u32 byte_cnt, struct be_dma_mem *cmd);
+extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+ u8 loopback_type, u8 enable);
#define BE_MAC_LOOPBACK 0x0
#define BE_PHY_LOOPBACK 0x1
#define BE_ONE_PORT_EXT_LOOPBACK 0x2
+#define BE_NO_LOOPBACK 0xff
static void
be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
status = be_cmd_read_port_type(adapter, adapter->port_num,
&connector);
- switch (connector) {
- case 7:
- ecmd->port = PORT_FIBRE;
- break;
- default:
- ecmd->port = PORT_TP;
- break;
+ if (!status) {
+ switch (connector) {
+ case 7:
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
+ case 0:
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
+ default:
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_INTERNAL;
+ break;
+ }
+ } else {
+ ecmd->port = PORT_AUI;
+ ecmd->transceiver = XCVR_INTERNAL;
}
/* Save for future use */
adapter->link_speed = ecmd->speed;
adapter->port_type = ecmd->port;
+ adapter->transceiver = ecmd->transceiver;
} else {
ecmd->speed = adapter->link_speed;
ecmd->port = adapter->port_type;
+ ecmd->transceiver = adapter->transceiver;
}
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
ecmd->phy_address = adapter->port_num;
- ecmd->transceiver = XCVR_INTERNAL;
+ switch (ecmd->port) {
+ case PORT_FIBRE:
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ break;
+ case PORT_TP:
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
+ break;
+ case PORT_AUI:
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI);
+ break;
+ }
return 0;
}
return ret;
}
+static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
+ u64 *status)
+{
+ be_cmd_set_loopback(adapter, adapter->port_num,
+ loopback_type, 1);
+ *status = be_cmd_loopback_test(adapter, adapter->port_num,
+ loopback_type, 1500,
+ 2, 0xabc);
+ be_cmd_set_loopback(adapter, adapter->port_num,
+ BE_NO_LOOPBACK, 1);
+ return *status;
+}
+
static void
be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
{
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
if (test->flags & ETH_TEST_FL_OFFLINE) {
- data[0] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_MAC_LOOPBACK, 1500,
- 2, 0xabc);
- if (data[0] != 0)
+ if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
+ &data[0]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
-
- data[1] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_PHY_LOOPBACK, 1500,
- 2, 0xabc);
- if (data[1] != 0)
+ }
+ if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
+ &data[1]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
-
- data[2] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_ONE_PORT_EXT_LOOPBACK,
- 1500, 2, 0xabc);
- if (data[2] != 0)
+ }
+ if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
+ &data[2]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
+ }
data[3] = be_test_ddr_dma(adapter);
if (data[3] != 0)
static void be_post_rx_frags(struct be_adapter *adapter)
{
struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
- struct be_rx_page_info *page_info = NULL;
+ struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL;
struct be_queue_info *rxq = &adapter->rx_obj.q;
struct page *pagep = NULL;
struct be_eth_rx_d *rxd;
rxd = queue_head_node(rxq);
rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
- queue_head_inc(rxq);
/* Any space left in the current big page for another frag? */
if ((page_offset + rx_frag_size + rx_frag_size) >
pagep = NULL;
page_info->last_page_user = true;
}
+
+ prev_page_info = page_info;
+ queue_head_inc(rxq);
page_info = &page_info_tbl[rxq->head];
}
if (pagep)
- page_info->last_page_user = true;
+ prev_page_info->last_page_user = true;
if (posted) {
atomic_add(posted, &rxq->used);
#include <asm/dma.h>
#include <linux/dma-mapping.h>
+#include <asm/dpmc.h>
#include <asm/blackfin.h>
#include <asm/cacheflush.h>
#include <asm/portmux.h>
u32 sclk, mdc_div;
/* Enable PHY output early */
- if (!(bfin_read_VR_CTL() & PHYCLKOE))
- bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
+ if (!(bfin_read_VR_CTL() & CLKBUFOE))
+ bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
sclk = get_sclk();
mdc_div = ((sclk / MDC_CLK) / 2) - 1;
if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD) {
bnx2x_set_iscsi_eth_mac_addr(bp, 1);
bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET;
+ bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping,
+ CNIC_SB_ID(bp));
}
mutex_unlock(&bp->cnic_mutex);
#endif
// check if any partner replys
if (best->is_individual) {
pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
- best->slave->dev->master->name);
+ best->slave ? best->slave->dev->master->name : "NULL");
}
best->is_active = 1;
goto error_tx_buf;
}
priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
- if (!priv->spi_tx_buf) {
+ if (!priv->spi_rx_buf) {
ret = -ENOMEM;
goto error_rx_buf;
}
write_irq(dev, lp->chip_type, dev->irq);
ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev);
if (ret) {
- if (net_debug)
- printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq);
+ printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq);
goto bad_out;
}
}
SET_ETHTOOL_OPS(ndev, ðtool_ops);
netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+ clk_enable(emac_clk);
+
/* register the network device */
SET_NETDEV_DEV(ndev, &pdev->dev);
rc = register_netdev(ndev);
goto netdev_reg_err;
}
- clk_enable(emac_clk);
/* MII/Phy intialisation, mdio bus registration */
emac_mii = mdiobus_alloc();
netdev_reg_err:
mdio_alloc_err:
+ clk_disable(emac_clk);
no_irq_res:
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, res->end - res->start + 1);
/* for ioport free */
int bars;
int need_ioport;
+
+ bool discarding;
};
enum e1000_state_t {
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
switch (adapter->rx_buffer_len) {
- case E1000_RXBUFFER_256:
- rctl |= E1000_RCTL_SZ_256;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_512:
- rctl |= E1000_RCTL_SZ_512;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_1024:
- rctl |= E1000_RCTL_SZ_1024;
- rctl &= ~E1000_RCTL_BSEX;
- break;
case E1000_RXBUFFER_2048:
default:
rctl |= E1000_RCTL_SZ_2048;
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
buffer_info->dma = 0;
- count--;
-
- while (count >= 0) {
+ if (count)
count--;
- i--;
- if (i < 0)
+
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
}
* however with the new *_jumbo_rx* routines, jumbo receives will use
* fragmented skbs */
- if (max_frame <= E1000_RXBUFFER_256)
- adapter->rx_buffer_len = E1000_RXBUFFER_256;
- else if (max_frame <= E1000_RXBUFFER_512)
- adapter->rx_buffer_len = E1000_RXBUFFER_512;
- else if (max_frame <= E1000_RXBUFFER_1024)
- adapter->rx_buffer_len = E1000_RXBUFFER_1024;
- else if (max_frame <= E1000_RXBUFFER_2048)
+ if (max_frame <= E1000_RXBUFFER_2048)
adapter->rx_buffer_len = E1000_RXBUFFER_2048;
else
#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
length = le16_to_cpu(rx_desc->length);
/* !EOP means multiple descriptors were used to store a single
- * packet, also make sure the frame isn't just CRC only */
- if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
+ * packet, if thats the case we need to toss it. In fact, we
+ * to toss every packet with the EOP bit clear and the next
+ * frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->discarding = true;
+
+ if (adapter->discarding) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
" buffers\n", netdev->name);
/* recycle */
buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->discarding = false;
goto next_desc;
}
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
/* check for link */
switch (hw->phy.media_type) {
/* CRC Stripping defines */
#define FLAG2_CRC_STRIPPING (1 << 0)
#define FLAG2_HAS_PHY_WAKEUP (1 << 1)
+#define FLAG2_IS_DISCARDING (1 << 2)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
u16 data);
-extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
+ /* Adaptive IFS not supported */
+ mac->adaptive_ifs = false;
/* check for link */
switch (hw->phy.media_type) {
u8 forced_speed_duplex;
+ bool adaptive_ifs;
bool arc_subsystem_valid;
bool autoneg;
bool autoneg_failed;
#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW 0x0400
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
phy->id = e1000_phy_unknown;
- e1000e_get_phy_id(hw);
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+ /*
+ * In case the PHY needs to be in mdio slow mode (eg. 82577),
+ * set slow mode and try to get the PHY id again.
+ */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ }
phy->type = e1000e_get_phy_type_from_id(phy->id);
switch (phy->type) {
break;
}
+out:
return ret_val;
}
mac->rar_entry_count--;
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = true;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
/* LED operations */
switch (mac->type) {
}
+/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= HV_KMRN_MDIO_SLOW;
+
+ ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+ return ret_val;
+}
+
/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
s32 ret_val = 0;
+ u16 phy_data;
if (hw->mac.type != e1000_pchlan)
return ret_val;
+ /* Set MDIO slow mode before any other MDIO access */
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
if (((hw->phy.type == e1000_phy_82577) &&
((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ hw->phy.ops.release(hw);
if (ret_val)
goto out;
- hw->phy.ops.release(hw);
/*
* Configure the K1 Si workaround during phy reset assuming there is
* link so that it disables K1 if link is in 1Gbps.
*/
ret_val = e1000_k1_gig_workaround_hv(hw, true);
+ if (ret_val)
+ goto out;
+ /* Workaround for link disconnects on a busy hub in half duplex */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg_locked(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ &phy_data);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.write_reg_locked(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ phy_data & 0x00FF);
+release:
+ hw->phy.ops.release(hw);
out:
return ret_val;
}
/* Allow time for h/w to get to a quiescent state after reset */
mdelay(10);
+ /* Perform any necessary post-reset workarounds */
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
if (!ret_val)
e1000_release_swflag_ich8lan(hw);
+ /* Perform any necessary post-reset workarounds */
+ if (hw->mac.type == e1000_pchlan)
+ ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
if (ctrl & E1000_CTRL_PHY_RST)
ret_val = hw->phy.ops.get_cfg_done(hw);
kab |= E1000_KABGTXD_BGSQLBIAS;
ew32(KABGTXD, kab);
- if (hw->mac.type == e1000_pchlan)
- ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
-
out:
return ret_val;
}
void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
{
u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
/* Setup the receive address */
e_dbg("Programming MAC Address into RAR[0]\n");
/* Zero out the other (rar_entry_count - 1) receive addresses */
e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
- for (i = 1; i < rar_count; i++) {
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
- e1e_flush();
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((i << 1) + 1), 0);
- e1e_flush();
- }
+ for (i = 1; i < rar_count; i++)
+ e1000e_rar_set(hw, mac_addr, i);
}
/**
rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
- rar_high |= E1000_RAH_AV;
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low);
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high);
+ /*
+ * Some bridges will combine consecutive 32-bit writes into
+ * a single burst write, which will malfunction on some parts.
+ * The flushes avoid this.
+ */
+ ew32(RAL(index), rar_low);
+ e1e_flush();
+ ew32(RAH(index), rar_high);
+ e1e_flush();
}
/**
{
struct e1000_mac_info *mac = &hw->mac;
+ if (!mac->adaptive_ifs) {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
mac->current_ifs_val = 0;
mac->ifs_min_val = IFS_MIN;
mac->ifs_max_val = IFS_MAX;
mac->in_ifs_mode = false;
ew32(AIT, 0);
+out:
+ return;
}
/**
{
struct e1000_mac_info *mac = &hw->mac;
+ if (!mac->adaptive_ifs) {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
if (mac->tx_packet_delta > MIN_NUM_XMITS) {
mac->in_ifs_mode = true;
ew32(AIT, 0);
}
}
+out:
+ return;
}
/**
s32 ret_val, hdr_csum, csum;
u8 i, len;
+ hw->mac.tx_pkt_filtering = true;
+
/* No manageability, no filtering */
if (!e1000e_check_mng_mode(hw)) {
hw->mac.tx_pkt_filtering = false;
- return 0;
+ goto out;
}
/*
* reason, disable filtering.
*/
ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val != 0) {
+ if (ret_val) {
hw->mac.tx_pkt_filtering = false;
- return ret_val;
+ goto out;
}
/* Read in the header. Length and offset are in dwords. */
*/
if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
hw->mac.tx_pkt_filtering = true;
- return 1;
+ goto out;
}
/* Cookie area is valid, make the final check for filtering. */
if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
hw->mac.tx_pkt_filtering = false;
- return 0;
+ goto out;
}
- hw->mac.tx_pkt_filtering = true;
- return 1;
+out:
+ return hw->mac.tx_pkt_filtering;
}
/**
length = le16_to_cpu(rx_desc->length);
- /* !EOP means multiple descriptors were used to store a single
- * packet, also make sure the frame isn't just CRC only */
- if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
+ /*
+ * !EOP means multiple descriptors were used to store a single
+ * packet, if that's the case we need to toss it. In fact, we
+ * need to toss every packet with the EOP bit clear and the
+ * next frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+ if (adapter->flags2 & FLAG2_IS_DISCARDING) {
/* All receives must fit into a single buffer */
e_dbg("Receive packet consumed multiple buffers\n");
/* recycle */
buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
goto next_desc;
}
PCI_DMA_FROMDEVICE);
buffer_info->dma = 0;
- if (!(staterr & E1000_RXD_STAT_EOP)) {
+ /* see !EOP comment in other rx routine */
+ if (!(staterr & E1000_RXD_STAT_EOP))
+ adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+ if (adapter->flags2 & FLAG2_IS_DISCARDING) {
e_dbg("Packet Split buffers didn't pick up the full "
"packet\n");
dev_kfree_skb_irq(skb);
+ if (staterr & E1000_RXD_STAT_EOP)
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
goto next_desc;
}
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
writel(0, adapter->hw.hw_addr + rx_ring->head);
writel(0, adapter->hw.hw_addr + rx_ring->tail);
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
switch (adapter->rx_buffer_len) {
- case 256:
- rctl |= E1000_RCTL_SZ_256;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case 512:
- rctl |= E1000_RCTL_SZ_512;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case 1024:
- rctl |= E1000_RCTL_SZ_1024;
- rctl &= ~E1000_RCTL_BSEX;
- break;
case 2048:
default:
rctl |= E1000_RCTL_SZ_2048;
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82577)) {
e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
- e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
- adapter->stats.scc += phy_data;
+ if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
+ adapter->stats.scc += phy_data;
e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
- e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
- adapter->stats.ecol += phy_data;
+ if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
+ adapter->stats.ecol += phy_data;
e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
- e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
- adapter->stats.mcc += phy_data;
+ if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
+ adapter->stats.mcc += phy_data;
e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
- e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
- adapter->stats.latecol += phy_data;
+ if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
+ adapter->stats.latecol += phy_data;
e1e_rphy(hw, HV_DC_UPPER, &phy_data);
- e1e_rphy(hw, HV_DC_LOWER, &phy_data);
- adapter->stats.dc += phy_data;
+ if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
+ adapter->stats.dc += phy_data;
} else {
adapter->stats.scc += er32(SCC);
adapter->stats.ecol += er32(ECOL);
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82577)) {
e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
- e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
- hw->mac.collision_delta = phy_data;
+ if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
+ hw->mac.collision_delta = phy_data;
} else {
hw->mac.collision_delta = er32(COLC);
}
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82577)) {
e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
- e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
- adapter->stats.tncrs += phy_data;
+ if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
+ adapter->stats.tncrs += phy_data;
} else {
if ((hw->mac.type != e1000_82574) &&
(hw->mac.type != e1000_82583))
0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
buffer_info->dma = 0;
- count--;
-
- while (count >= 0) {
+ if (count)
count--;
- i--;
- if (i < 0)
+
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
e1000_put_txbuf(adapter, buffer_info);;
}
* fragmented skbs
*/
- if (max_frame <= 256)
- adapter->rx_buffer_len = 256;
- else if (max_frame <= 512)
- adapter->rx_buffer_len = 512;
- else if (max_frame <= 1024)
- adapter->rx_buffer_len = 1024;
- else if (max_frame <= 2048)
+ if (max_frame <= 2048)
adapter->rx_buffer_len = 2048;
else
adapter->rx_buffer_len = 4096;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ pci_save_state(pdev);
e1000e_disable_l1aspm(pdev);
err = pci_enable_device_mem(pdev);
} else {
pci_set_master(pdev);
pci_restore_state(pdev);
+ pci_save_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
goto out;
- /*
- * If the PHY ID is still unknown, we may have an 82577
- * without link. We will try again after setting Slow MDIC
- * mode. No harm in trying again in this case since the PHY
- * ID is unknown at this point anyway.
- */
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- goto out;
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
- phy->ops.release(hw);
-
retry_count++;
}
out:
- /* Revert to MDIO fast mode, if applicable */
- if (retry_count) {
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- return ret_val;
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
- phy->ops.release(hw);
- }
-
return ret_val;
}
return 0;
}
-/**
- * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
- * @hw: pointer to the HW structure
- * @slow: true for slow mode, false for normal mode
- *
- * Assumes semaphore already acquired.
- **/
-s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
-{
- s32 ret_val = 0;
- u16 data = 0;
-
- /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
- hw->phy.addr = 1;
- ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val)
- goto out;
-
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
- (0x2180 | (slow << 10)));
- if (ret_val)
- goto out;
-
- /* dummy read when reverting to fast mode - throw away result */
- if (!slow)
- ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
-out:
- return ret_val;
-}
-
/**
* __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
- bool in_slow_mode = false;
if (!locked) {
ret_val = hw->phy.ops.acquire(hw);
return ret_val;
}
- /* Workaround failure in MDIO access while cable is disconnected */
- if ((hw->phy.type == e1000_phy_82577) &&
- !(er32(STATUS) & E1000_STATUS_LU)) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
-
- in_slow_mode = true;
- }
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
out:
- /* Revert to MDIO fast mode, if applicable */
- if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
if (!locked)
hw->phy.ops.release(hw);
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
- bool in_slow_mode = false;
if (!locked) {
ret_val = hw->phy.ops.acquire(hw);
return ret_val;
}
- /* Workaround failure in MDIO access while cable is disconnected */
- if ((hw->phy.type == e1000_phy_82577) &&
- !(er32(STATUS) & E1000_STATUS_LU)) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
-
- in_slow_mode = true;
- }
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
data);
out:
- /* Revert to MDIO fast mode, if applicable */
- if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
if (!locked)
hw->phy.ops.release(hw);
#include "gianfar.h"
#include "fsl_pq_mdio.h"
+struct fsl_pq_mdio_priv {
+ void __iomem *map;
+ struct fsl_pq_mdio __iomem *regs;
+};
+
/*
* Write value to the PHY at mii_id at register regnum,
* on the bus attached to the local interface, which may be different from the
static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
{
- return (void __iomem __force *)bus->priv;
+ struct fsl_pq_mdio_priv *priv = bus->priv;
+
+ return priv->regs;
}
/*
{
struct device_node *np = ofdev->node;
struct device_node *tbi;
+ struct fsl_pq_mdio_priv *priv;
struct fsl_pq_mdio __iomem *regs = NULL;
void __iomem *map;
u32 __iomem *tbipa;
u64 addr = 0, size = 0;
int err = 0;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
new_bus = mdiobus_alloc();
if (NULL == new_bus)
- return -ENOMEM;
+ goto err_free_priv;
new_bus->name = "Freescale PowerQUICC MII Bus",
new_bus->read = &fsl_pq_mdio_read,
new_bus->write = &fsl_pq_mdio_write,
new_bus->reset = &fsl_pq_mdio_reset,
+ new_bus->priv = priv;
fsl_pq_mdio_bus_name(new_bus->id, np);
/* Set the PHY base address */
err = -ENOMEM;
goto err_free_bus;
}
+ priv->map = map;
if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
of_device_is_compatible(np, "fsl,gianfar-tbi") ||
of_device_is_compatible(np, "ucc_geth_phy"))
map -= offsetof(struct fsl_pq_mdio, miimcfg);
regs = map;
-
- new_bus->priv = (void __force *)regs;
+ priv->regs = regs;
new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
err_free_irqs:
kfree(new_bus->irq);
err_unmap_regs:
- iounmap(regs);
+ iounmap(priv->map);
err_free_bus:
kfree(new_bus);
-
+err_free_priv:
+ kfree(priv);
return err;
}
{
struct device *device = &ofdev->dev;
struct mii_bus *bus = dev_get_drvdata(device);
+ struct fsl_pq_mdio_priv *priv = bus->priv;
mdiobus_unregister(bus);
dev_set_drvdata(device, NULL);
- iounmap(fsl_pq_mdio_get_regs(bus));
+ iounmap(priv->map);
bus->priv = NULL;
mdiobus_free(bus);
+ kfree(priv);
return 0;
}
static void gfar_clear_exact_match(struct net_device *dev);
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb);
MODULE_AUTHOR("Freescale Semiconductor, Inc");
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
.ndo_set_multicast_list = gfar_set_multi,
.ndo_tx_timeout = gfar_timeout,
.ndo_do_ioctl = gfar_ioctl,
- .ndo_select_queue = gfar_select_queue,
.ndo_get_stats = gfar_get_stats,
.ndo_vlan_rx_register = gfar_vlan_rx_register,
.ndo_set_mac_address = eth_mac_addr,
return priv->vlgrp || priv->rx_csum_enable;
}
-u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
- return skb_get_queue_mapping(skb);
-}
static void free_tx_pointers(struct gfar_private *priv)
{
int i = 0;
fcb = (struct rxfcb *)skb->data;
/* Remove the FCB from the skb */
- skb_set_queue_mapping(skb, fcb->rq);
/* Remove the padded bytes, if there are any */
- if (amount_pull)
+ if (amount_pull) {
+ skb_record_rx_queue(skb, fcb->rq);
skb_pull(skb, amount_pull);
+ }
if (priv->rx_csum_enable)
gfar_rx_checksum(skb, fcb);
/* Remove the FCS from the packet length */
skb_put(skb, pkt_len);
rx_queue->stats.rx_bytes += pkt_len;
-
+ skb_record_rx_queue(skb, rx_queue->qindex);
gfar_process_frame(dev, skb, amount_pull);
} else {
{
unsigned char *ptr;
struct bpqdev *bpq;
+ struct net_device *orig_dev;
int size;
/*
bpq = netdev_priv(dev);
+ orig_dev = dev;
if ((dev = bpq_get_ether_dev(dev)) == NULL) {
- dev->stats.tx_dropped++;
+ orig_dev->stats.tx_dropped++;
kfree_skb(skb);
return NETDEV_TX_OK;
}
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
/* copy out MAC address */
- for (z = 0; z < sizeof(dev->dev_addr); z++)
+ for (z = 0; z < ETH_ALEN; z++)
dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z);
/* print config */
hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
} else {
/* Set PCS register for forced link */
- reg |= E1000_PCS_LCTL_FSD | /* Force Speed */
- E1000_PCS_LCTL_FORCE_LINK | /* Force Link */
- E1000_PCS_LCTL_FLV_LINK_UP; /* Force link value up */
+ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
}
phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
- if (ret_val)
- goto out;
-
- /* Set number of link attempts before downshift */
- ret_val = phy->ops.read_reg(hw, I82580_CTRL_REG, &phy_data);
- if (ret_val)
- goto out;
- phy_data &= ~I82580_CTRL_DOWNSHIFT_MASK;
- ret_val = phy->ops.write_reg(hw, I82580_CTRL_REG, phy_data);
out:
return ret_val;
/* dual port cards only support WoL on port A from now on
* unless it was enabled in the eeprom for port B
* so exclude FUNC_1 ports from having WoL enabled */
- if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1 &&
+ if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) &&
!adapter->eeprom_wol) {
wol->supported = 0;
break;
hwm = min(((pba << 10) * 9 / 10),
((pba << 10) - 2 * adapter->max_frame_size));
- if (mac->type < e1000_82576) {
- fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
- fc->low_water = fc->high_water - 8;
- } else {
- fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
- fc->low_water = fc->high_water - 16;
- }
+ fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
fc->pause_time = 0xFFFF;
fc->send_xon = 1;
fc->current_mode = fc->requested_mode;
iph->daddr, 0,
IPPROTO_TCP,
0);
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
struct skb_frag_struct *frag;
+ count++;
i++;
if (i == tx_ring->count)
i = 0;
if (pci_dma_mapping_error(pdev, buffer_info->dma))
goto dma_error;
- count++;
}
tx_ring->buffer_info[i].skb = skb;
iph->daddr, 0,
IPPROTO_TCP,
0);
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
struct skb_frag_struct *frag;
+ count++;
i++;
if (i == tx_ring->count)
i = 0;
PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(pdev, buffer_info->dma))
goto dma_error;
- count++;
}
tx_ring->buffer_info[i].skb = skb;
buffer_info->length = 0;
buffer_info->next_to_watch = 0;
buffer_info->mapped_as_page = false;
- count--;
+ if (count)
+ count--;
/* clear timestamp and dma mappings for remaining portion of packet */
- while (count >= 0) {
- count--;
- i--;
- if (i < 0)
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
igbvf_put_txbuf(adapter, buffer_info);
}
err = hw->mac.ops.reset_hw(hw);
if (err) {
dev_info(&pdev->dev,
- "PF still in reset state, assigning new address\n");
+ "PF still in reset state, assigning new address."
+ " Is the PF interface up?\n");
random_ether_addr(hw->mac.addr);
} else {
err = hw->mac.ops.read_mac_addr(hw);
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
buffer_info->dma = 0;
- count--;
-
- while (count >= 0) {
+ if (count)
count--;
- i--;
- if (i < 0)
+
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
buffer_info = &tx_ring->buffer_info[i];
ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
}
################################################################################
#
# Intel 10 Gigabit PCI Express Linux driver
-# Copyright(c) 1999 - 2009 Intel Corporation.
+# Copyright(c) 1999 - 2010 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
#define DRV_VERSION "2.0.44-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
-static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
+static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
static const struct ixgbe_info *ixgbe_info_tbl[] = {
[board_82598] = &ixgbe_82598_info,
int reg_idx = tx_ring->reg_idx;
int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
- if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
tc = reg_idx >> 2;
txoff = IXGBE_TFCS_TXOFF0;
- } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ break;
+ case ixgbe_mac_82599EB:
tc = 0;
txoff = IXGBE_TFCS_TXOFF;
if (dcb_i == 8) {
tc += (reg_idx - 96) >> 4;
}
}
+ break;
+ default:
+ tc = 0;
}
txoff <<= tc;
}
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ /*
+ * pci_restore_state clears dev->state_saved so call
+ * pci_save_state to restore it.
+ */
+ pci_save_state(pdev);
err = pci_enable_device_mem(pdev);
if (err) {
iph->daddr, 0,
IPPROTO_TCP,
0);
- } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ } else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check =
~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
tx_buffer_info->dma = 0;
tx_buffer_info->time_stamp = 0;
tx_buffer_info->next_to_watch = 0;
- count--;
+ if (count)
+ count--;
/* clear timestamp and dma mappings for remaining portion of packet */
- while (count >= 0) {
- count--;
- i--;
- if (i < 0)
+ while (count--) {
+ if (i==0)
i += tx_ring->count;
+ i--;
tx_buffer_info = &tx_ring->tx_buffer_info[i];
ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
}
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int i;
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
struct sk_buff *skb;
int i;
- lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL);
+ lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL);
/* allocate the tx and rx ring buffer descriptors. */
/* returns a virtual addres and a physical address. */
lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
return 0;
err_port:
- for (port = 1; port <= dev->caps.num_ports; port++)
+ for (--port; port >= 1; --port)
mlx4_cleanup_port_info(&priv->port[port]);
mlx4_cleanup_mcg_table(dev);
struct sk_buff *skb;
int rx;
struct rx_desc *rx_desc;
+ int size;
skb = __skb_dequeue(&mp->rx_recycle);
if (skb == NULL)
rx_desc = rxq->rx_desc_area + rx;
+ size = skb->end - skb->data;
rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
- skb->data, mp->skb_size,
+ skb->data, size,
DMA_FROM_DEVICE);
- rx_desc->buf_size = mp->skb_size;
+ rx_desc->buf_size = size;
rxq->rx_skb[rx] = skb;
wmb();
rx_desc->cmd_sts = BUFFER_OWNED_BY_DMA | RX_ENABLE_INTERRUPT;
#define _NETXEN_NIC_LINUX_MAJOR 4
#define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 65
-#define NETXEN_NIC_LINUX_VERSIONID "4.0.65"
+#define _NETXEN_NIC_LINUX_SUBVERSION 72
+#define NETXEN_NIC_LINUX_VERSIONID "4.0.72"
#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
#define _major(v) (((v) >> 24) & 0xff)
#define NETXEN_NIC_TEST_LEN ARRAY_SIZE(netxen_nic_gstrings_test)
-#define NETXEN_NIC_REGS_COUNT 42
+#define NETXEN_NIC_REGS_COUNT 30
#define NETXEN_NIC_REGS_LEN (NETXEN_NIC_REGS_COUNT * sizeof(__le32))
#define NETXEN_MAX_EEPROM_LEN 1024
return NETXEN_NIC_REGS_LEN;
}
-struct netxen_niu_regs {
- __u32 reg[NETXEN_NIC_REGS_COUNT];
-};
-
-static struct netxen_niu_regs niu_registers[] = {
- {
- /* GB Mode */
- {
- NETXEN_NIU_GB_SERDES_RESET,
- NETXEN_NIU_GB0_MII_MODE,
- NETXEN_NIU_GB1_MII_MODE,
- NETXEN_NIU_GB2_MII_MODE,
- NETXEN_NIU_GB3_MII_MODE,
- NETXEN_NIU_GB0_GMII_MODE,
- NETXEN_NIU_GB1_GMII_MODE,
- NETXEN_NIU_GB2_GMII_MODE,
- NETXEN_NIU_GB3_GMII_MODE,
- NETXEN_NIU_REMOTE_LOOPBACK,
- NETXEN_NIU_GB0_HALF_DUPLEX,
- NETXEN_NIU_GB1_HALF_DUPLEX,
- NETXEN_NIU_RESET_SYS_FIFOS,
- NETXEN_NIU_GB_CRC_DROP,
- NETXEN_NIU_GB_DROP_WRONGADDR,
- NETXEN_NIU_TEST_MUX_CTL,
-
- NETXEN_NIU_GB_MAC_CONFIG_0(0),
- NETXEN_NIU_GB_MAC_CONFIG_1(0),
- NETXEN_NIU_GB_HALF_DUPLEX_CTRL(0),
- NETXEN_NIU_GB_MAX_FRAME_SIZE(0),
- NETXEN_NIU_GB_TEST_REG(0),
- NETXEN_NIU_GB_MII_MGMT_CONFIG(0),
- NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
- NETXEN_NIU_GB_MII_MGMT_ADDR(0),
- NETXEN_NIU_GB_MII_MGMT_CTRL(0),
- NETXEN_NIU_GB_MII_MGMT_STATUS(0),
- NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
- NETXEN_NIU_GB_INTERFACE_CTRL(0),
- NETXEN_NIU_GB_INTERFACE_STATUS(0),
- NETXEN_NIU_GB_STATION_ADDR_0(0),
- NETXEN_NIU_GB_STATION_ADDR_1(0),
- -1,
- }
- },
- {
- /* XG Mode */
- {
- NETXEN_NIU_XG_SINGLE_TERM,
- NETXEN_NIU_XG_DRIVE_HI,
- NETXEN_NIU_XG_DRIVE_LO,
- NETXEN_NIU_XG_DTX,
- NETXEN_NIU_XG_DEQ,
- NETXEN_NIU_XG_WORD_ALIGN,
- NETXEN_NIU_XG_RESET,
- NETXEN_NIU_XG_POWER_DOWN,
- NETXEN_NIU_XG_RESET_PLL,
- NETXEN_NIU_XG_SERDES_LOOPBACK,
- NETXEN_NIU_XG_DO_BYTE_ALIGN,
- NETXEN_NIU_XG_TX_ENABLE,
- NETXEN_NIU_XG_RX_ENABLE,
- NETXEN_NIU_XG_STATUS,
- NETXEN_NIU_XG_PAUSE_THRESHOLD,
- NETXEN_NIU_XGE_CONFIG_0,
- NETXEN_NIU_XGE_CONFIG_1,
- NETXEN_NIU_XGE_IPG,
- NETXEN_NIU_XGE_STATION_ADDR_0_HI,
- NETXEN_NIU_XGE_STATION_ADDR_0_1,
- NETXEN_NIU_XGE_STATION_ADDR_1_LO,
- NETXEN_NIU_XGE_STATUS,
- NETXEN_NIU_XGE_MAX_FRAME_SIZE,
- NETXEN_NIU_XGE_PAUSE_FRAME_VALUE,
- NETXEN_NIU_XGE_TX_BYTE_CNT,
- NETXEN_NIU_XGE_TX_FRAME_CNT,
- NETXEN_NIU_XGE_RX_BYTE_CNT,
- NETXEN_NIU_XGE_RX_FRAME_CNT,
- NETXEN_NIU_XGE_AGGR_ERROR_CNT,
- NETXEN_NIU_XGE_MULTICAST_FRAME_CNT,
- NETXEN_NIU_XGE_UNICAST_FRAME_CNT,
- NETXEN_NIU_XGE_CRC_ERROR_CNT,
- NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR,
- NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR,
- NETXEN_NIU_XGE_LOCAL_ERROR_CNT,
- NETXEN_NIU_XGE_REMOTE_ERROR_CNT,
- NETXEN_NIU_XGE_CONTROL_CHAR_CNT,
- NETXEN_NIU_XGE_PAUSE_FRAME_CNT,
- -1,
- }
- }
-};
-
static void
netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- __u32 mode, *regs_buff = p;
- int i, window;
+ struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct nx_host_sds_ring *sds_ring;
+ u32 *regs_buff = p;
+ int ring, i = 0;
+ int port = adapter->physical_port;
memset(p, 0, NETXEN_NIC_REGS_LEN);
+
regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
(adapter->pdev)->device;
- /* which mode */
- regs_buff[0] = NXRD32(adapter, NETXEN_NIU_MODE);
- mode = regs_buff[0];
-
- /* Common registers to all the modes */
- regs_buff[2] = NXRD32(adapter, NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER);
- /* GB/XGB Mode */
- mode = (mode / 2) - 1;
- window = 0;
- if (mode <= 1) {
- for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) {
- /* GB: port specific registers */
- if (mode == 0 && i >= 19)
- window = adapter->physical_port *
- NETXEN_NIC_PORT_WINDOW;
-
- regs_buff[i] = NXRD32(adapter,
- niu_registers[mode].reg[i - 3] + window);
- }
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return;
+
+ regs_buff[i++] = NXRD32(adapter, CRB_CMDPEG_STATE);
+ regs_buff[i++] = NXRD32(adapter, CRB_RCVPEG_STATE);
+ regs_buff[i++] = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
+ regs_buff[i++] = NXRDIO(adapter, adapter->crb_int_state_reg);
+ regs_buff[i++] = NXRD32(adapter, NX_CRB_DEV_REF_COUNT);
+ regs_buff[i++] = NXRD32(adapter, NX_CRB_DEV_STATE);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_HALT_STATUS2);
+
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_0+0x3c);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_1+0x3c);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_2+0x3c);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_3+0x3c);
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_4+0x3c);
+ i += 2;
+
+ regs_buff[i++] = NXRD32(adapter, CRB_XG_STATE_P3);
+ regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer));
+
+ } else {
+ i++;
+
+ regs_buff[i++] = NXRD32(adapter,
+ NETXEN_NIU_XGE_CONFIG_0+(0x10000*port));
+ regs_buff[i++] = NXRD32(adapter,
+ NETXEN_NIU_XGE_CONFIG_1+(0x10000*port));
+
+ regs_buff[i++] = NXRD32(adapter, CRB_XG_STATE);
+ regs_buff[i++] = NXRDIO(adapter,
+ adapter->tx_ring->crb_cmd_consumer);
+ }
+
+ regs_buff[i++] = NXRDIO(adapter, adapter->tx_ring->crb_cmd_producer);
+
+ regs_buff[i++] = NXRDIO(adapter,
+ recv_ctx->rds_rings[0].crb_rcv_producer);
+ regs_buff[i++] = NXRDIO(adapter,
+ recv_ctx->rds_rings[1].crb_rcv_producer);
+
+ regs_buff[i++] = adapter->max_sds_rings;
+
+ for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+ sds_ring = &(recv_ctx->sds_rings[ring]);
+ regs_buff[i++] = NXRDIO(adapter,
+ sds_ring->crb_sts_consumer);
}
}
static u32 netxen_nic_test_link(struct net_device *dev)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- __u32 status;
- int val;
+ u32 val, port;
- /* read which mode */
- if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
- if (adapter->phy_read &&
- adapter->phy_read(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
- &status) != 0)
- return -EIO;
- else {
- val = netxen_get_phy_link(status);
- return !val;
- }
- } else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
+ port = adapter->physical_port;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ val = NXRD32(adapter, CRB_XG_STATE_P3);
+ val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+ return (val == XG_LINK_UP_P3) ? 0 : 1;
+ } else {
val = NXRD32(adapter, CRB_XG_STATE);
+ val = (val >> port*8) & 0xff;
return (val == XG_LINK_UP) ? 0 : 1;
}
- return -EIO;
}
static int
void
netxen_pcie_sem_unlock(struct netxen_adapter *adapter, int sem)
{
- int val;
- val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem)));
+ NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem)));
}
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
struct list_head *head;
nx_mac_list_t *cur;
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return;
+
list_splice_tail_init(&adapter->mac_list, &del_list);
nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list);
tx_ring = adapter->tx_ring;
vfree(tx_ring->cmd_buf_arr);
+ kfree(tx_ring);
+ adapter->tx_ring = NULL;
}
int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
return 1;
- old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ old_count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
for (i = 0; i < 10; i++) {
if (!(first_boot & 0x4)) {
first_boot |= 0x4;
NXWR32(adapter, NETXEN_PCIE_REG(0x4), first_boot);
- first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4));
+ NXRD32(adapter, NETXEN_PCIE_REG(0x4));
}
/* This is the first boot after power up */
linkup = (val == XG_LINK_UP_P3);
} else {
val = NXRD32(adapter, CRB_XG_STATE);
- if (adapter->ahw.port_type == NETXEN_NIC_GBE)
- linkup = (val >> port) & 1;
- else {
- val = (val >> port*8) & 0xff;
- linkup = (val == XG_LINK_UP);
- }
+ val = (val >> port*8) & 0xff;
+ linkup = (val == XG_LINK_UP);
}
netxen_advert_link_change(adapter, linkup);
break;
udelay(1);
}
- if (limit < 0)
+ if (limit <= 0)
return -ENODEV;
return 0;
PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
PCMCIA_DEVICE_NULL,
for (i = 0; i < 8; i++)
printk(KERN_CONT " %02X", ladrf[i]);
printk(KERN_CONT "\n");
- }
#endif
} /* BuildLAF */
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
MODULE_FIRMWARE("cis/PCMLM28.cis");
MODULE_FIRMWARE("cis/DP83903.cis");
MODULE_FIRMWARE("cis/LA-PCM.cis");
-MODULE_FIRMWARE("PE520.cis");
+MODULE_FIRMWARE("cis/PE520.cis");
MODULE_FIRMWARE("cis/NE2K.cis");
MODULE_FIRMWARE("cis/PE-200.cis");
MODULE_FIRMWARE("cis/tamarack.cis");
#include <linux/crc32.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
/* if the ethernet address is not valid, force to 00:00:00:00:00:00 */
if (!is_valid_ether_addr(dev->perm_addr))
- memset(dev->dev_addr, 0, sizeof(dev->dev_addr));
+ memset(dev->dev_addr, 0, ETH_ALEN);
if (pcnet32_debug & NETIF_MSG_PROBE) {
printk(" %pM", dev->dev_addr);
bool clk125en = true;
/* Abort if we are using an untested phy. */
- if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 ||
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+ if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
return;
(phydev->phy_id & phydrv->phy_id_mask));
}
+#ifdef CONFIG_PM
+
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
{
struct device_driver *drv = phydev->dev.driver;
return true;
}
-/* Suspend and resume. Copied from platform_suspend and
- * platform_resume
- */
-static int mdio_bus_suspend(struct device * dev, pm_message_t state)
+static int mdio_bus_suspend(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
+ /*
+ * We must stop the state machine manually, otherwise it stops out of
+ * control, possibly with the phydev->lock held. Upon resume, netdev
+ * may call phy routines that try to grab the same lock, and that may
+ * lead to a deadlock.
+ */
+ if (phydev->attached_dev)
+ phy_stop_machine(phydev);
+
if (!mdio_bus_phy_may_suspend(phydev))
return 0;
+
return phydrv->suspend(phydev);
}
-static int mdio_bus_resume(struct device * dev)
+static int mdio_bus_resume(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
+ int ret;
if (!mdio_bus_phy_may_suspend(phydev))
+ goto no_resume;
+
+ ret = phydrv->resume(phydev);
+ if (ret < 0)
+ return ret;
+
+no_resume:
+ if (phydev->attached_dev)
+ phy_start_machine(phydev, NULL);
+
+ return 0;
+}
+
+static int mdio_bus_restore(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct net_device *netdev = phydev->attached_dev;
+ int ret;
+
+ if (!netdev)
return 0;
- return phydrv->resume(phydev);
+
+ ret = phy_init_hw(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* The PHY needs to renegotiate. */
+ phydev->link = 0;
+ phydev->state = PHY_UP;
+
+ phy_start_machine(phydev, NULL);
+
+ return 0;
}
+static struct dev_pm_ops mdio_bus_pm_ops = {
+ .suspend = mdio_bus_suspend,
+ .resume = mdio_bus_resume,
+ .freeze = mdio_bus_suspend,
+ .thaw = mdio_bus_resume,
+ .restore = mdio_bus_restore,
+};
+
+#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
+
+#else
+
+#define MDIO_BUS_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
struct bus_type mdio_bus_type = {
.name = "mdio_bus",
.match = mdio_bus_match,
- .suspend = mdio_bus_suspend,
- .resume = mdio_bus_resume,
+ .pm = MDIO_BUS_PM_OPS,
};
EXPORT_SYMBOL(mdio_bus_type);
static void phy_change(struct work_struct *work);
-static void phy_state_machine(struct work_struct *work);
/**
* phy_start_machine - start PHY state machine tracking
{
phydev->adjust_state = handler;
- INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine);
schedule_delayed_work(&phydev->state_queue, HZ);
}
* phy_state_machine - Handle the state machine
* @work: work_struct that describes the work to be done
*/
-static void phy_state_machine(struct work_struct *work)
+void phy_state_machine(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct phy_device *phydev =
dev->state = PHY_DOWN;
mutex_init(&dev->lock);
+ INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
return dev;
}
}
EXPORT_SYMBOL(phy_disconnect);
+int phy_init_hw(struct phy_device *phydev)
+{
+ int ret;
+
+ if (!phydev->drv || !phydev->drv->config_init)
+ return 0;
+
+ ret = phy_scan_fixups(phydev);
+ if (ret < 0)
+ return ret;
+
+ return phydev->drv->config_init(phydev);
+}
+
/**
* phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
- if (phydev->drv->config_init) {
- int err;
-
- err = phy_scan_fixups(phydev);
-
- if (err < 0)
- return err;
-
- err = phydev->drv->config_init(phydev);
-
- if (err < 0)
- return err;
- }
-
- return 0;
+ return phy_init_hw(phydev);
}
EXPORT_SYMBOL(phy_attach_direct);
err = pcie_set_readrq(pdev, 4096);
if (err) {
dev_err(&pdev->dev, "Set readrq failed.\n");
- goto err_out;
+ goto err_out1;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "No usable DMA configuration.\n");
- goto err_out;
+ goto err_out2;
}
/* Set PCIe reset type for EEH to fundamental. */
if (!qdev->reg_base) {
dev_err(&pdev->dev, "Register mapping failed.\n");
err = -ENOMEM;
- goto err_out;
+ goto err_out2;
}
qdev->doorbell_area_size = pci_resource_len(pdev, 3);
if (!qdev->doorbell_area) {
dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
err = -ENOMEM;
- goto err_out;
+ goto err_out2;
}
err = ql_get_board_info(qdev);
if (err) {
dev_err(&pdev->dev, "Register access failed.\n");
err = -EIO;
- goto err_out;
+ goto err_out2;
}
qdev->msg_enable = netif_msg_init(debug, default_msg);
spin_lock_init(&qdev->hw_lock);
err = qdev->nic_ops->get_flash(qdev);
if (err) {
dev_err(&pdev->dev, "Invalid FLASH.\n");
- goto err_out;
+ goto err_out2;
}
memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
DRV_NAME, DRV_VERSION);
}
return 0;
-err_out:
+err_out2:
ql_release_all(pdev);
+err_out1:
pci_disable_device(pdev);
return err;
}
printk("Error code 0x%x\n", readl(®s->Fail1));
- index = (((readl(®s->EvtPrd) >> 8) & 0xff ) - 1) % EVT_RING_ENTRIES;
+ index = (((readl(®s->EvtPrd) >> 8) & 0xff) - 1) % TX_RING_ENTRIES;
cons = rrpriv->dirty_tx;
printk("TX ring index %i, TX consumer %i\n",
index, cons);
break;
}
} else {
- if (!(val64 & busy_bit)) {
+ if (val64 & busy_bit) {
ret = SUCCESS;
break;
}
EFX_LOG(efx, "create port\n");
+ if (phy_flash_cfg)
+ efx->phy_mode = PHY_MODE_SPECIAL;
+
/* Connect up MAC/PHY operations table */
rc = efx->type->probe_port(efx);
if (rc)
goto err;
- if (phy_flash_cfg)
- efx->phy_mode = PHY_MODE_SPECIAL;
-
/* Sanity check MAC address */
if (is_valid_ether_addr(efx->mac_address)) {
memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
static void falcon_remove_port(struct efx_nic *efx)
{
+ efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
efx_writeo(efx, ®, FR_AB_XM_MGT_INT_MASK);
}
-/* Get status of XAUI link */
-static bool falcon_xaui_link_ok(struct efx_nic *efx)
+static bool falcon_xgxs_link_ok(struct efx_nic *efx)
{
efx_oword_t reg;
bool align_done, link_ok = false;
int sync_status;
- if (LOOPBACK_INTERNAL(efx))
- return true;
-
/* Read link status */
efx_reado(efx, ®, FR_AB_XX_CORE_STAT);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES);
efx_writeo(efx, ®, FR_AB_XX_CORE_STAT);
- /* If the link is up, then check the phy side of the xaui link */
- if (efx->link_state.up && link_ok)
- if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS))
- link_ok = efx_mdio_phyxgxs_lane_sync(efx);
-
return link_ok;
}
+static bool falcon_xmac_link_ok(struct efx_nic *efx)
+{
+ /*
+ * Check MAC's XGXS link status except when using XGMII loopback
+ * which bypasses the XGXS block.
+ * If possible, check PHY's XGXS link status except when using
+ * MAC loopback.
+ */
+ return (efx->loopback_mode == LOOPBACK_XGMII ||
+ falcon_xgxs_link_ok(efx)) &&
+ (!(efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) ||
+ LOOPBACK_INTERNAL(efx) ||
+ efx_mdio_phyxgxs_lane_sync(efx));
+}
+
void falcon_reconfigure_xmac_core(struct efx_nic *efx)
{
unsigned int max_frame_len;
/* Try to bring up the Falcon side of the Falcon-Phy XAUI link */
-static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
+static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries)
{
- bool mac_up = falcon_xaui_link_ok(efx);
+ bool mac_up = falcon_xmac_link_ok(efx);
if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS ||
efx_phy_mode_disabled(efx->phy_mode))
falcon_reset_xaui(efx);
udelay(200);
- mac_up = falcon_xaui_link_ok(efx);
+ mac_up = falcon_xmac_link_ok(efx);
--tries;
}
static bool falcon_xmac_check_fault(struct efx_nic *efx)
{
- return !falcon_check_xaui_link_up(efx, 5);
+ return !falcon_xmac_link_ok_retry(efx, 5);
}
static int falcon_reconfigure_xmac(struct efx_nic *efx)
falcon_reconfigure_mac_wrapper(efx);
- efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5);
+ efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5);
falcon_mask_status_intr(efx, true);
return 0;
return;
falcon_mask_status_intr(efx, false);
- efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1);
+ efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1);
falcon_mask_status_intr(efx, true);
}
if (spins != 0) {
--spins;
udelay(1);
- } else
- schedule();
+ } else {
+ schedule_timeout_uninterruptible(1);
+ }
time = get_seconds();
loff_t offset, u8 *buffer, size_t length)
{
u8 inbuf[MC_CMD_NVRAM_READ_IN_LEN];
- u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(length)];
+ u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
size_t outlen;
int rc;
int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
loff_t offset, const u8 *buffer, size_t length)
{
- u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(length)];
+ u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
int rc;
MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_TYPE, type);
BUILD_BUG_ON(MC_CMD_NVRAM_WRITE_OUT_LEN != 0);
- rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, sizeof(inbuf),
+ rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf,
+ ALIGN(MC_CMD_NVRAM_WRITE_IN_LEN(length), 4),
NULL, 0, NULL);
if (rc)
goto fail;
extern int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
loff_t offset, const u8 *buffer,
size_t length);
+#define EFX_MCDI_NVRAM_LEN_MAX 128
extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
loff_t offset, size_t length);
extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx,
#define MC_CMD_MAC_RX_LANES01_DISP_ERR 57
#define MC_CMD_MAC_RX_LANES23_DISP_ERR 58
#define MC_CMD_MAC_RX_MATCH_FAULT 59
+#define MC_CMD_GMAC_DMABUF_START 64
+#define MC_CMD_GMAC_DMABUF_END 95
/* Insert new members here. */
-#define MC_CMD_MAC_GENERATION_END 60
+#define MC_CMD_MAC_GENERATION_END 96
#define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1)
/* MC_CMD_MAC_STATS:
static int efx_mcdi_phy_probe(struct efx_nic *efx)
{
- struct efx_mcdi_phy_cfg *phy_cfg;
+ struct efx_mcdi_phy_cfg *phy_data;
+ u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+ u32 caps;
int rc;
- /* TODO: Move phy_data initialisation to
- * phy_op->probe/remove, rather than init/fini */
- phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL);
- if (phy_cfg == NULL) {
- rc = -ENOMEM;
- goto fail_alloc;
- }
- rc = efx_mcdi_get_phy_cfg(efx, phy_cfg);
+ /* Initialise and populate phy_data */
+ phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (phy_data == NULL)
+ return -ENOMEM;
+
+ rc = efx_mcdi_get_phy_cfg(efx, phy_data);
if (rc != 0)
goto fail;
- efx->phy_type = phy_cfg->type;
+ /* Read initial link advertisement */
+ BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+ rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+ outbuf, sizeof(outbuf), NULL);
+ if (rc)
+ goto fail;
+
+ /* Fill out nic state */
+ efx->phy_data = phy_data;
+ efx->phy_type = phy_data->type;
- efx->mdio_bus = phy_cfg->channel;
- efx->mdio.prtad = phy_cfg->port;
- efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
+ efx->mdio_bus = phy_data->channel;
+ efx->mdio.prtad = phy_data->port;
+ efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
efx->mdio.mode_support = 0;
- if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
+ if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C22;
- if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
+ if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+ caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
+ if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
+ efx->link_advertising =
+ mcdi_to_ethtool_cap(phy_data->media, caps);
+ else
+ phy_data->forced_cap = caps;
+
/* Assert that we can map efx -> mcdi loopback modes */
BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE);
BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA);
* but by convention we don't */
efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
- kfree(phy_cfg);
-
- return 0;
-
-fail:
- kfree(phy_cfg);
-fail_alloc:
- return rc;
-}
-
-static int efx_mcdi_phy_init(struct efx_nic *efx)
-{
- struct efx_mcdi_phy_cfg *phy_data;
- u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
- u32 caps;
- int rc;
-
- phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
- if (phy_data == NULL)
- return -ENOMEM;
-
- rc = efx_mcdi_get_phy_cfg(efx, phy_data);
- if (rc != 0)
- goto fail;
-
- efx->phy_data = phy_data;
-
- BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
- rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
- outbuf, sizeof(outbuf), NULL);
- if (rc)
- goto fail;
-
- caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
- if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
- efx->link_advertising =
- mcdi_to_ethtool_cap(phy_data->media, caps);
- else
- phy_data->forced_cap = caps;
-
return 0;
fail:
return !efx_link_state_equal(&efx->link_state, &old_state);
}
-static void efx_mcdi_phy_fini(struct efx_nic *efx)
+static void efx_mcdi_phy_remove(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
struct efx_phy_operations efx_mcdi_phy_ops = {
.probe = efx_mcdi_phy_probe,
- .init = efx_mcdi_phy_init,
+ .init = efx_port_dummy_op_int,
.reconfigure = efx_mcdi_phy_reconfigure,
.poll = efx_mcdi_phy_poll,
- .fini = efx_mcdi_phy_fini,
+ .fini = efx_port_dummy_op_void,
+ .remove = efx_mcdi_phy_remove,
.get_settings = efx_mcdi_phy_get_settings,
.set_settings = efx_mcdi_phy_set_settings,
.run_tests = NULL,
#include "mcdi_pcol.h"
#define EFX_SPI_VERIFY_BUF_LEN 16
-#define EFX_MCDI_CHUNK_LEN 128
struct efx_mtd_partition {
struct mtd_info mtd;
int rc = 0;
while (offset < end) {
- chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+ chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
rc = efx_mcdi_nvram_read(efx, part->mcdi.nvram_type, offset,
buffer, chunk);
if (rc)
}
while (offset < end) {
- chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+ chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
rc = efx_mcdi_nvram_write(efx, part->mcdi.nvram_type, offset,
buffer, chunk);
if (rc)
int (*probe) (struct efx_nic *efx);
int (*init) (struct efx_nic *efx);
void (*fini) (struct efx_nic *efx);
+ void (*remove) (struct efx_nic *efx);
int (*reconfigure) (struct efx_nic *efx);
bool (*poll) (struct efx_nic *efx);
void (*get_settings) (struct efx_nic *efx,
EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1);
/* Prefetch threshold 2 => fetch when descriptor cache half empty */
EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2);
+ /* Disable hardware watchdog which can misfire */
+ EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_WD_TMR, 0x3fffff);
/* Squash TX of packets of 16 bytes or less */
if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
#define PCS_FW_HEARTBEAT_REG 0xd7ee
#define PCS_FW_HEARTB_LBN 0
#define PCS_FW_HEARTB_WIDTH 8
+#define PCS_FW_PRODUCT_CODE_1 0xd7f0
+#define PCS_FW_VERSION_1 0xd7f3
+#define PCS_FW_BUILD_1 0xd7f6
#define PCS_UC8051_STATUS_REG 0xd7fd
#define PCS_UC_STATUS_LBN 0
#define PCS_UC_STATUS_WIDTH 8
struct qt202x_phy_data {
enum efx_phy_mode phy_mode;
+ bool bug17190_in_bad_state;
+ unsigned long bug17190_timer;
+ u32 firmware_ver;
};
#define QT2022C2_MAX_RESET_TIME 500
#define QT2022C2_RESET_WAIT 10
-static int qt2025c_wait_reset(struct efx_nic *efx)
+#define QT2025C_MAX_HEARTB_TIME (5 * HZ)
+#define QT2025C_HEARTB_WAIT 100
+#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10)
+#define QT2025C_FWSTART_WAIT 100
+
+#define BUG17190_INTERVAL (2 * HZ)
+
+static int qt2025c_wait_heartbeat(struct efx_nic *efx)
{
- unsigned long timeout = jiffies + 10 * HZ;
+ unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME;
int reg, old_counter = 0;
/* Wait for firmware heartbeat to start */
old_counter = counter;
else if (counter != old_counter)
break;
- if (time_after(jiffies, timeout))
+ if (time_after(jiffies, timeout)) {
+ /* Some cables have EEPROMs that conflict with the
+ * PHY's on-board EEPROM so it cannot load firmware */
+ EFX_ERR(efx, "If an SFP+ direct attach cable is"
+ " connected, please check that it complies"
+ " with the SFP+ specification\n");
return -ETIMEDOUT;
- msleep(10);
+ }
+ msleep(QT2025C_HEARTB_WAIT);
}
+ return 0;
+}
+
+static int qt2025c_wait_fw_status_good(struct efx_nic *efx)
+{
+ unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME;
+ int reg;
+
/* Wait for firmware status to look good */
for (;;) {
reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
break;
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
+ msleep(QT2025C_FWSTART_WAIT);
+ }
+
+ return 0;
+}
+
+static void qt2025c_restart_firmware(struct efx_nic *efx)
+{
+ /* Restart microcontroller execution of firmware from RAM */
+ efx_mdio_write(efx, 3, 0xe854, 0x00c0);
+ efx_mdio_write(efx, 3, 0xe854, 0x0040);
+ msleep(50);
+}
+
+static int qt2025c_wait_reset(struct efx_nic *efx)
+{
+ int rc;
+
+ rc = qt2025c_wait_heartbeat(efx);
+ if (rc != 0)
+ return rc;
+
+ rc = qt2025c_wait_fw_status_good(efx);
+ if (rc == -ETIMEDOUT) {
+ /* Bug 17689: occasionally heartbeat starts but firmware status
+ * code never progresses beyond 0x00. Try again, once, after
+ * restarting execution of the firmware image. */
+ EFX_LOG(efx, "bashing QT2025C microcontroller\n");
+ qt2025c_restart_firmware(efx);
+ rc = qt2025c_wait_heartbeat(efx);
+ if (rc != 0)
+ return rc;
+ rc = qt2025c_wait_fw_status_good(efx);
+ }
+
+ return rc;
+}
+
+static void qt2025c_firmware_id(struct efx_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+ u8 firmware_id[9];
+ size_t i;
+
+ for (i = 0; i < sizeof(firmware_id); i++)
+ firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS,
+ PCS_FW_PRODUCT_CODE_1 + i);
+ EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
+ (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
+ firmware_id[3] >> 4, firmware_id[3] & 0xf,
+ firmware_id[4], firmware_id[5],
+ firmware_id[6], firmware_id[7], firmware_id[8]);
+ phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) |
+ ((firmware_id[3] & 0x0f) << 16) |
+ (firmware_id[4] << 8) | firmware_id[5];
+}
+
+static void qt2025c_bug17190_workaround(struct efx_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+
+ /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD
+ * layers up, but PCS down (no block_lock). If we notice this state
+ * persisting for a couple of seconds, we switch PMA/PMD loopback
+ * briefly on and then off again, which is normally sufficient to
+ * recover it.
+ */
+ if (efx->link_state.up ||
+ !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) {
+ phy_data->bug17190_in_bad_state = false;
+ return;
+ }
+
+ if (!phy_data->bug17190_in_bad_state) {
+ phy_data->bug17190_in_bad_state = true;
+ phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+ return;
+ }
+
+ if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
+ EFX_LOG(efx, "bashing QT2025C PMA/PMD\n");
+ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_PMA_CTRL1_LOOPBACK, true);
msleep(100);
+ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_PMA_CTRL1_LOOPBACK, false);
+ phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+ }
+}
+
+static int qt2025c_select_phy_mode(struct efx_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+ struct falcon_board *board = falcon_board(efx);
+ int reg, rc, i;
+ uint16_t phy_op_mode;
+
+ /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+
+ * Self-Configure mode. Don't attempt any switching if we encounter
+ * older firmware. */
+ if (phy_data->firmware_ver < 0x02000100)
+ return 0;
+
+ /* In general we will get optimal behaviour in "SFP+ Self-Configure"
+ * mode; however, that powers down most of the PHY when no module is
+ * present, so we must use a different mode (any fixed mode will do)
+ * to be sure that loopbacks will work. */
+ phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020;
+
+ /* Only change mode if really necessary */
+ reg = efx_mdio_read(efx, 1, 0xc319);
+ if ((reg & 0x0038) == phy_op_mode)
+ return 0;
+ EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode);
+
+ /* This sequence replicates the register writes configured in the boot
+ * EEPROM (including the differences between board revisions), except
+ * that the operating mode is changed, and the PHY is prevented from
+ * unnecessarily reloading the main firmware image again. */
+ efx_mdio_write(efx, 1, 0xc300, 0x0000);
+ /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9
+ * STOPs onto the firmware/module I2C bus to reset it, varies across
+ * board revisions, as the bus is connected to different GPIO/LED
+ * outputs on the PHY.) */
+ if (board->major == 0 && board->minor < 2) {
+ efx_mdio_write(efx, 1, 0xc303, 0x4498);
+ for (i = 0; i < 9; i++) {
+ efx_mdio_write(efx, 1, 0xc303, 0x4488);
+ efx_mdio_write(efx, 1, 0xc303, 0x4480);
+ efx_mdio_write(efx, 1, 0xc303, 0x4490);
+ efx_mdio_write(efx, 1, 0xc303, 0x4498);
+ }
+ } else {
+ efx_mdio_write(efx, 1, 0xc303, 0x0920);
+ efx_mdio_write(efx, 1, 0xd008, 0x0004);
+ for (i = 0; i < 9; i++) {
+ efx_mdio_write(efx, 1, 0xc303, 0x0900);
+ efx_mdio_write(efx, 1, 0xd008, 0x0005);
+ efx_mdio_write(efx, 1, 0xc303, 0x0920);
+ efx_mdio_write(efx, 1, 0xd008, 0x0004);
+ }
+ efx_mdio_write(efx, 1, 0xc303, 0x4900);
+ }
+ efx_mdio_write(efx, 1, 0xc303, 0x4900);
+ efx_mdio_write(efx, 1, 0xc302, 0x0004);
+ efx_mdio_write(efx, 1, 0xc316, 0x0013);
+ efx_mdio_write(efx, 1, 0xc318, 0x0054);
+ efx_mdio_write(efx, 1, 0xc319, phy_op_mode);
+ efx_mdio_write(efx, 1, 0xc31a, 0x0098);
+ efx_mdio_write(efx, 3, 0x0026, 0x0e00);
+ efx_mdio_write(efx, 3, 0x0027, 0x0013);
+ efx_mdio_write(efx, 3, 0x0028, 0xa528);
+ efx_mdio_write(efx, 1, 0xd006, 0x000a);
+ efx_mdio_write(efx, 1, 0xd007, 0x0009);
+ efx_mdio_write(efx, 1, 0xd008, 0x0004);
+ /* This additional write is not present in the boot EEPROM. It
+ * prevents the PHY's internal boot ROM doing another pointless (and
+ * slow) reload of the firmware image (the microcontroller's code
+ * memory is not affected by the microcontroller reset). */
+ efx_mdio_write(efx, 1, 0xc317, 0x00ff);
+ efx_mdio_write(efx, 1, 0xc300, 0x0002);
+ msleep(20);
+
+ /* Restart microcontroller execution of firmware from RAM */
+ qt2025c_restart_firmware(efx);
+
+ /* Wait for the microcontroller to be ready again */
+ rc = qt2025c_wait_reset(efx);
+ if (rc < 0) {
+ EFX_ERR(efx, "PHY microcontroller reset during mode switch "
+ "timed out\n");
+ return rc;
}
return 0;
/* Wait 250ms for the PHY to complete bootup */
msleep(250);
- /* Check that all the MMDs we expect are present and responding. We
- * expect faults on some if the link is down, but not on the PHY XS */
- rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
- if (rc < 0)
- goto fail;
-
falcon_board(efx)->type->init_phy(efx);
return rc;
static int qt202x_phy_probe(struct efx_nic *efx)
{
+ struct qt202x_phy_data *phy_data;
+
+ phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
+ phy_data->bug17190_in_bad_state = false;
+ phy_data->bug17190_timer = 0;
+
efx->mdio.mmds = QT202X_REQUIRED_DEVS;
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
static int qt202x_phy_init(struct efx_nic *efx)
{
- struct qt202x_phy_data *phy_data;
u32 devid;
int rc;
return rc;
}
- phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
- if (!phy_data)
- return -ENOMEM;
- efx->phy_data = phy_data;
-
devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
efx_mdio_id_rev(devid));
- phy_data->phy_mode = efx->phy_mode;
+ if (efx->phy_type == PHY_TYPE_QT2025C)
+ qt2025c_firmware_id(efx);
+
return 0;
}
efx->link_state.fd = true;
efx->link_state.fc = efx->wanted_fc;
+ if (efx->phy_type == PHY_TYPE_QT2025C)
+ qt2025c_bug17190_workaround(efx);
+
return efx->link_state.up != was_up;
}
struct qt202x_phy_data *phy_data = efx->phy_data;
if (efx->phy_type == PHY_TYPE_QT2025C) {
+ int rc = qt2025c_select_phy_mode(efx);
+ if (rc)
+ return rc;
+
/* There are several different register bits which can
* disable TX (and save power) on direct-attach cables
* or optical transceivers, varying somewhat between
mdio45_ethtool_gset(&efx->mdio, ecmd);
}
-static void qt202x_phy_fini(struct efx_nic *efx)
+static void qt202x_phy_remove(struct efx_nic *efx)
{
/* Free the context block */
kfree(efx->phy_data);
.init = qt202x_phy_init,
.reconfigure = qt202x_phy_reconfigure,
.poll = qt202x_phy_poll,
- .fini = qt202x_phy_fini,
+ .fini = efx_port_dummy_op_void,
+ .remove = qt202x_phy_remove,
.get_settings = qt202x_phy_get_settings,
.set_settings = efx_mdio_set_settings,
};
static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
{
int rc = 0;
- int devad = __ffs(efx->mdio.mmds);
+ int devad;
u16 physid1, physid2;
- if (efx->phy_type == PHY_TYPE_NONE)
+ if (efx->mdio.mode_support & MDIO_SUPPORTS_C45)
+ devad = __ffs(efx->mdio.mmds);
+ else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22)
+ devad = MDIO_DEVAD_NONE;
+ else
return 0;
mutex_lock(&efx->mac_lock);
void siena_remove_port(struct efx_nic *efx)
{
+ efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
int rc;
rtnl_lock();
- efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
- MDIO_PMA_10GBT_TXPWR_SHORT,
- count != 0 && *buf != '0');
- rc = efx_reconfigure_port(efx);
+ if (efx->state != STATE_RUNNING) {
+ rc = -EBUSY;
+ } else {
+ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
+ MDIO_PMA_10GBT_TXPWR_SHORT,
+ count != 0 && *buf != '0');
+ rc = efx_reconfigure_port(efx);
+ }
rtnl_unlock();
return rc < 0 ? rc : (ssize_t)count;
return 0;
}
-static int sfx7101_phy_probe(struct efx_nic *efx)
+static int tenxpress_phy_probe(struct efx_nic *efx)
{
- efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
- efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
- efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
- return 0;
-}
+ struct tenxpress_phy_data *phy_data;
+ int rc;
+
+ /* Allocate phy private storage */
+ phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
+
+ /* Create any special files */
+ if (efx->phy_type == PHY_TYPE_SFT9001B) {
+ rc = device_create_file(&efx->pci_dev->dev,
+ &dev_attr_phy_short_reach);
+ if (rc)
+ goto fail;
+ }
+
+ if (efx->phy_type == PHY_TYPE_SFX7101) {
+ efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+ efx->mdio.mode_support = MDIO_SUPPORTS_C45;
+
+ efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+
+ efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+ ADVERTISED_10000baseT_Full);
+ } else {
+ efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+ efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+
+ efx->loopback_modes = (SFT9001_LOOPBACKS |
+ FALCON_XMAC_LOOPBACKS |
+ FALCON_GMAC_LOOPBACKS);
+
+ efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+ ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_100baseT_Full);
+ }
-static int sft9001_phy_probe(struct efx_nic *efx)
-{
- efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
- efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
- efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS |
- FALCON_GMAC_LOOPBACKS);
return 0;
+
+fail:
+ kfree(efx->phy_data);
+ efx->phy_data = NULL;
+ return rc;
}
static int tenxpress_phy_init(struct efx_nic *efx)
{
- struct tenxpress_phy_data *phy_data;
- int rc = 0;
+ int rc;
falcon_board(efx)->type->init_phy(efx);
- phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
- if (!phy_data)
- return -ENOMEM;
- efx->phy_data = phy_data;
- phy_data->phy_mode = efx->phy_mode;
-
if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
if (efx->phy_type == PHY_TYPE_SFT9001A) {
int reg;
rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
- goto fail;
+ return rc;
rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
- goto fail;
+ return rc;
}
rc = tenxpress_init(efx);
if (rc < 0)
- goto fail;
+ return rc;
- /* Initialise advertising flags */
- efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full);
- if (efx->phy_type != PHY_TYPE_SFX7101)
- efx->link_advertising |= (ADVERTISED_1000baseT_Full |
- ADVERTISED_100baseT_Full);
+ /* Reinitialise flow control settings */
efx_link_set_wanted_fc(efx, efx->wanted_fc);
efx_mdio_an_reconfigure(efx);
- if (efx->phy_type == PHY_TYPE_SFT9001B) {
- rc = device_create_file(&efx->pci_dev->dev,
- &dev_attr_phy_short_reach);
- if (rc)
- goto fail;
- }
-
schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
/* Let XGXS and SerDes out of reset */
falcon_reset_xaui(efx);
return 0;
-
- fail:
- kfree(efx->phy_data);
- efx->phy_data = NULL;
- return rc;
}
/* Perform a "special software reset" on the PHY. The caller is
return !efx_link_state_equal(&efx->link_state, &old_state);
}
-static void tenxpress_phy_fini(struct efx_nic *efx)
+static void sfx7101_phy_fini(struct efx_nic *efx)
{
int reg;
+ /* Power down the LNPGA */
+ reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+ efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+
+ /* Waiting here ensures that the board fini, which can turn
+ * off the power to the PHY, won't get run until the LNPGA
+ * powerdown has been given long enough to complete. */
+ schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+}
+
+static void tenxpress_phy_remove(struct efx_nic *efx)
+{
if (efx->phy_type == PHY_TYPE_SFT9001B)
device_remove_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
- if (efx->phy_type == PHY_TYPE_SFX7101) {
- /* Power down the LNPGA */
- reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
- efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
-
- /* Waiting here ensures that the board fini, which can turn
- * off the power to the PHY, won't get run until the LNPGA
- * powerdown has been given long enough to complete. */
- schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
- }
-
kfree(efx->phy_data);
efx->phy_data = NULL;
}
}
struct efx_phy_operations falcon_sfx7101_phy_ops = {
- .probe = sfx7101_phy_probe,
+ .probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
.poll = tenxpress_phy_poll,
- .fini = tenxpress_phy_fini,
+ .fini = sfx7101_phy_fini,
+ .remove = tenxpress_phy_remove,
.get_settings = tenxpress_get_settings,
.set_settings = tenxpress_set_settings,
.set_npage_adv = sfx7101_set_npage_adv,
};
struct efx_phy_operations falcon_sft9001_phy_ops = {
- .probe = sft9001_phy_probe,
+ .probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
.poll = tenxpress_phy_poll,
- .fini = tenxpress_phy_fini,
+ .fini = efx_port_dummy_op_void,
+ .remove = tenxpress_phy_remove,
.get_settings = tenxpress_get_settings,
.set_settings = tenxpress_set_settings,
.set_npage_adv = sft9001_set_npage_adv,
EFX_TXQ_MASK];
efx_tsoh_free(tx_queue, buffer);
EFX_BUG_ON_PARANOID(buffer->skb);
- buffer->len = 0;
- buffer->continuation = true;
if (buffer->unmap_len) {
unmap_addr = (buffer->dma_addr + buffer->len -
buffer->unmap_len);
PCI_DMA_TODEVICE);
buffer->unmap_len = 0;
}
+ buffer->len = 0;
+ buffer->continuation = true;
}
}
mdelay(1);
cnt--;
}
- if (cnt < 0)
+ if (cnt == 0)
printk(KERN_ERR "Device reset fail\n");
/* Table Init */
{
u32 reg1;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~phy_power[port];
reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_FE)
gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
}
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
/* Force a renegotiation */
sky2->tx_cons = idx;
smp_mb();
- if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
+ /* Wake unless it's detached, and called e.g. from sky2_down() */
+ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev))
netif_wake_queue(dev);
}
/* reset PHY Link Detect */
phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_link_up(sky2);
}
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
u32 err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
0xfffffffful);
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_HWE_L1_MASK)
}
sky2_power_on(hw);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
/* reset PHY Link Detect */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4,
reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
/* restore the PCIe Link Control register */
sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
}
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
}
+static void sky2_hw_set_wol(struct sky2_hw *hw)
+{
+ int wol = 0;
+ int i;
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->wol)
+ wol = 1;
+ }
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
+ sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+
+ device_set_wakeup_enable(&hw->pdev->dev, wol);
+}
+
static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
const struct sky2_port *sky2 = netdev_priv(dev);
sky2->wol = wol->wolopts;
- if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
- hw->chip_id == CHIP_ID_YUKON_EX ||
- hw->chip_id == CHIP_ID_YUKON_FE_P)
- sky2_write32(hw, B0_CTST, sky2->wol
- ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
-
- device_set_wakeup_enable(&hw->pdev->dev, sky2->wol);
+ sky2_hw_set_wol(hw);
if (!netif_running(dev))
sky2_wol_init(sky2);
INIT_WORK(&hw->restart_work, sky2_restart);
pci_set_drvdata(pdev, hw);
+ pdev->d3_delay = 150;
return 0;
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
* Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
* Copyright (C) 2004 Sun Microsystems Inc.
- * Copyright (C) 2005-2009 Broadcom Corporation.
+ * Copyright (C) 2005-2010 Broadcom Corporation.
*
* Firmware is:
* Derived from proprietary unpublished source code,
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.105"
-#define DRV_MODULE_RELDATE "December 2, 2009"
+#define DRV_MODULE_VERSION "3.106"
+#define DRV_MODULE_RELDATE "January 12, 2010"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
else
tp->phy_addr = 1;
- is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0)
+ is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ else
+ is_serdes = tr32(TG3_CPMU_PHY_STRAP) &
+ TG3_CPMU_PHY_STRAP_IS_SERDES;
if (is_serdes)
tp->phy_addr += 7;
} else
(*post_ptr)++;
if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
- u32 idx = *post_ptr % TG3_RX_RING_SIZE;
- tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx);
+ tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
+ tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
+ tpr->rx_std_prod_idx);
work_mask &= ~RXD_OPAQUE_RING_STD;
rx_std_posted = 0;
}
((u64) tpr->rx_std_mapping >> 32));
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tpr->rx_std_mapping & 0xffffffff));
- if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_BUFFER_DESC);
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
else
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
if (err)
return err;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+ (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0 ||
+ (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
+ return -ENOTSUPP;
+
/* Initialize data/descriptor byte/word swapping. */
val = tr32(GRC_MODE);
val &= GRC_MODE_HOST_STACKUP;
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
* Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com)
* Copyright (C) 2004 Sun Microsystems Inc.
+ * Copyright (C) 2007-2010 Broadcom Corporation.
*/
#ifndef _T3_H
#define CPMU_MUTEX_REQ_DRIVER 0x00001000
#define TG3_CPMU_MUTEX_GNT 0x00003660
#define CPMU_MUTEX_GNT_DRIVER 0x00001000
+#define TG3_CPMU_PHY_STRAP 0x00003664
+#define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020
/* 0x3664 --> 0x3800 unused */
/* Mbuf cluster free registers */
If in doubt, say Y.
+config TULIP_DM910X
+ def_bool y
+ depends on TULIP && SPARC
+
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on PCI || EISA
#include <asm/uaccess.h>
#include <asm/irq.h>
+#ifdef CONFIG_TULIP_DM910X
+#include <linux/of.h>
+#endif
+
/* Board/System/Debug information/definition ---------------- */
#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
if (!printed_version++)
printk(version);
+ /*
+ * SPARC on-board DM910x chips should be handled by the main
+ * tulip driver, except for early DM9100s.
+ */
+#ifdef CONFIG_TULIP_DM910X
+ if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) ||
+ ent->driver_data == PCI_DM9102_ID) {
+ struct device_node *dp = pci_device_to_OF_node(pdev);
+
+ if (dp && of_get_property(dp, "local-mac-address", NULL)) {
+ printk(KERN_INFO DRV_NAME
+ ": skipping on-board DM910x (use tulip)\n");
+ return -ENODEV;
+ }
+ }
+#endif
+
/* Init network device */
dev = alloc_etherdev(sizeof(*db));
if (dev == NULL)
| HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task },
/* DM910X */
+#ifdef CONFIG_TULIP_DM910X
{ "Davicom DM9102/DM9102A", 128, 0x0001ebef,
HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
tulip_timer, tulip_media_task },
+#else
+ { NULL },
+#endif
/* RS7112 */
{ "Conexant LANfinity", 256, 0x0001ebef,
{ 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 },
{ 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 },
+#ifdef CONFIG_TULIP_DM910X
{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+#endif
{ 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
{ 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
+ { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */
{ 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ } /* terminate list */
};
}
/*
- * Early DM9100's need software CRC and the DMFE driver
+ * DM910x chips should be handled by the dmfe driver, except
+ * on-board chips on SPARC systems. Also, early DM9100s need
+ * software CRC which only the dmfe driver supports.
*/
- if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
- {
- /* Read Chip revision */
- if (pdev->revision < 0x30)
- {
- printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
+#ifdef CONFIG_TULIP_DM910X
+ if (chip_idx == DM910X) {
+ struct device_node *dp;
+
+ if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
+ pdev->revision < 0x30) {
+ printk(KERN_INFO PFX
+ "skipping early DM9100 with Crc bug (use dmfe)\n");
+ return -ENODEV;
+ }
+
+ dp = pci_device_to_OF_node(pdev);
+ if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
+ printk(KERN_INFO PFX
+ "skipping DM910x expansion card (use dmfe)\n");
return -ENODEV;
}
}
+#endif
/*
* Looks for early PCI chipsets where people report hangs
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
wake_up_interruptible_sync(sk->sk_sleep);
- tun = container_of(sk, struct tun_sock, sk)->tun;
+ tun = tun_sk(sk)->tun;
kill_fasync(&tun->fasync, SIGIO, POLL_OUT);
}
static void tun_sock_destruct(struct sock *sk)
{
- free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev);
+ free_netdev(tun_sk(sk)->tun->dev);
}
static struct proto tun_proto = {
sk->sk_write_space = tun_sock_write_space;
sk->sk_sndbuf = INT_MAX;
- container_of(sk, struct tun_sock, sk)->tun = tun;
+ tun_sk(sk)->tun = tun;
security_tun_dev_post_create(sk);
static void ugeth_quiesce(struct ucc_geth_private *ugeth)
{
- /* Wait for and prevent any further xmits. */
+ /* Prevent any further xmits, plus detach the device. */
+ netif_device_detach(ugeth->ndev);
+
+ /* Wait for any current xmits to finish. */
netif_tx_disable(ugeth->ndev);
/* Disable the interrupt to avoid NAPI rescheduling. */
{
napi_enable(&ugeth->napi);
enable_irq(ugeth->ug_info->uf_info.irq);
- netif_tx_wake_all_queues(ugeth->ndev);
+ netif_device_attach(ugeth->ndev);
}
/* Called every time the controller might need to be made
ugeth->oldspeed = phydev->speed;
}
- /*
- * To change the MAC configuration we need to disable the
- * controller. To do so, we have to either grab ugeth->lock,
- * which is a bad idea since 'graceful stop' commands might
- * take quite a while, or we can quiesce driver's activity.
- */
- ugeth_quiesce(ugeth);
- ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
-
- out_be32(&ug_regs->maccfg2, tempval);
- out_be32(&uf_regs->upsmr, upsmr);
-
- ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
- ugeth_activate(ugeth);
-
if (!ugeth->oldlink) {
new_state = 1;
ugeth->oldlink = 1;
}
+
+ if (new_state) {
+ /*
+ * To change the MAC configuration we need to disable
+ * the controller. To do so, we have to either grab
+ * ugeth->lock, which is a bad idea since 'graceful
+ * stop' commands might take quite a while, or we can
+ * quiesce driver's activity.
+ */
+ ugeth_quiesce(ugeth);
+ ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+
+ out_be32(&ug_regs->maccfg2, tempval);
+ out_be32(&uf_regs->upsmr, upsmr);
+
+ ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+ ugeth_activate(ugeth);
+ }
} else if (ugeth->oldlink) {
new_state = 1;
ugeth->oldlink = 0;
/* Handle the transmitted buffer and release */
/* the BD to be used with the current frame */
- if ((bd == ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0))
+ skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
+ if (!skb)
break;
dev->stats.tx_packets++;
- skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
-
if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN &&
skb_recycle_check(skb,
ugeth->ug_info->uf_info.max_rx_buf_length +
if (!netif_running(ndev))
return 0;
+ netif_device_detach(ndev);
napi_disable(&ugeth->napi);
/*
phy_start(ugeth->phydev);
napi_enable(&ugeth->napi);
- netif_start_queue(ndev);
+ netif_device_attach(ndev);
return 0;
}
using the maximum is
easier */
#define UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32
-#define UCC_GETH_SCHEDULER_ALIGNMENT 4 /* This is a guess */
+#define UCC_GETH_SCHEDULER_ALIGNMENT 8 /* This is a guess */
#define UCC_GETH_TX_STATISTICS_ALIGNMENT 4 /* This is a guess */
#define UCC_GETH_RX_STATISTICS_ALIGNMENT 4 /* This is a guess */
#define UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT 64
#define UCC_GETH_RX_BD_QUEUES_ALIGNMENT 8 /* This is a guess */
#define UCC_GETH_RX_PREFETCHED_BDS_ALIGNMENT 128 /* This is a guess */
-#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 /* This
+#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 8 /* This
is a
guess
*/
#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size
*/
#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT 128
+#define UCC_GETH_UTFTT_INIT 512
/* Gigabit Ethernet (1000 Mbps) */
#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual
FIFO size */
#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */
#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */
-#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual
+#define UCC_GETH_UTFS_GIGA_INIT 4096/*2048*/ /* Tx virtual
+ FIFO size */
+#define UCC_GETH_UTFET_GIGA_INIT 2048/*1024*/ /* 1/2 utfs */
+#define UCC_GETH_UTFTT_GIGA_INIT 4096/*0x40*/ /* Tx virtual
FIFO size */
-#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */
-#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */
#define UCC_GETH_REMODER_INIT 0 /* bits that must be
set */
u8 usb_gone;
struct work_struct async_get_intf;
struct work_struct async_put_intf;
+ struct work_struct reset_device;
struct usb_device *usb;
struct usb_interface *interface;
/* Helper functions */
static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
struct usb_device *usb, gfp_t gfp);
-static void log_usb_status(int status, const char *function);
+static void handle_usb_error(int status, const char *function,
+ struct hso_device *hso_dev);
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
int type, int dir);
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
static int hso_put_activity(struct hso_device *hso_dev);
static int hso_get_activity(struct hso_device *hso_dev);
static void tiocmget_intr_callback(struct urb *urb);
+static void reset_device(struct work_struct *data);
/*****************************************************************************/
/* Helping functions */
/*****************************************************************************/
{USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */
{USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7701)},
+ {USB_DEVICE(0x0af0, 0x7706)},
{USB_DEVICE(0x0af0, 0x7801)},
{USB_DEVICE(0x0af0, 0x7901)},
+ {USB_DEVICE(0x0af0, 0x7A01)},
+ {USB_DEVICE(0x0af0, 0x7A05)},
{USB_DEVICE(0x0af0, 0x8200)},
{USB_DEVICE(0x0af0, 0x8201)},
+ {USB_DEVICE(0x0af0, 0x8300)},
+ {USB_DEVICE(0x0af0, 0x8302)},
+ {USB_DEVICE(0x0af0, 0x8304)},
+ {USB_DEVICE(0x0af0, 0x8400)},
{USB_DEVICE(0x0af0, 0xd035)},
{USB_DEVICE(0x0af0, 0xd055)},
{USB_DEVICE(0x0af0, 0xd155)},
{USB_DEVICE(0x0af0, 0xd157)},
{USB_DEVICE(0x0af0, 0xd257)},
{USB_DEVICE(0x0af0, 0xd357)},
+ {USB_DEVICE(0x0af0, 0xd058)},
+ {USB_DEVICE(0x0af0, 0xc100)},
{}
};
MODULE_DEVICE_TABLE(usb, hso_ids);
spin_unlock_irqrestore(&serial_table_lock, flags);
}
-/* log a meaningful explanation of an USB status */
-static void log_usb_status(int status, const char *function)
+static void handle_usb_error(int status, const char *function,
+ struct hso_device *hso_dev)
{
char *explanation;
case -EMSGSIZE:
explanation = "internal error";
break;
+ case -EILSEQ:
+ case -EPROTO:
+ case -ETIME:
+ case -ETIMEDOUT:
+ explanation = "protocol error";
+ if (hso_dev)
+ schedule_work(&hso_dev->reset_device);
+ break;
default:
explanation = "unknown status";
break;
}
+
+ /* log a meaningful explanation of an USB status */
D1("%s: received USB status - %s (%d)", function, explanation, status);
}
/* log status, but don't act on it, we don't need to resubmit anything
* anyhow */
if (status)
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, odev->parent);
hso_put_activity(odev->parent);
result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
if (result) {
dev_warn(&odev->parent->interface->dev,
- "failed mux_bulk_tx_urb %d", result);
+ "failed mux_bulk_tx_urb %d\n", result);
net->stats.tx_errors++;
netif_start_queue(net);
} else {
/* is al ok? (Filip: Who's Al ?) */
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, odev->parent);
return;
}
if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
u32 rest;
u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
- rest = urb->actual_length % odev->in_endp->wMaxPacketSize;
+ rest = urb->actual_length %
+ le16_to_cpu(odev->in_endp->wMaxPacketSize);
if (((rest == 5) || (rest == 6)) &&
!memcmp(((u8 *) urb->transfer_buffer) +
urb->actual_length - 4, crc_check, 4)) {
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_warn(&odev->parent->interface->dev,
- "%s failed submit mux_bulk_rx_urb %d", __func__,
+ "%s failed submit mux_bulk_rx_urb %d\n", __func__,
result);
}
D1("serial == NULL");
return;
} else if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
return;
}
u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
rest =
urb->actual_length %
- serial->in_endp->wMaxPacketSize;
+ le16_to_cpu(serial->in_endp->wMaxPacketSize);
if (((rest == 5) || (rest == 6)) &&
!memcmp(((u8 *) urb->transfer_buffer) +
urb->actual_length - 4, crc_check, 4)) {
if (!serial)
return;
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
return;
}
tiocmget = serial->tiocmget;
D1("no tty structures");
return -EINVAL;
}
+
+ if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
+ return -EINVAL;
+
if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
spin_lock_irqsave(&serial->serial_lock, flags);
result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
if (result) {
dev_err(&ctrl_urb->dev->dev,
- "%s failed submit ctrl_urb %d type %d", __func__,
+ "%s failed submit ctrl_urb %d type %d\n", __func__,
result, type);
return result;
}
/* status check */
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, NULL);
return;
}
D4("\n--- Got intr callback 0x%02X ---", status);
if (serial != NULL) {
D1("Pending read interrupt on port %d\n", i);
spin_lock(&serial->serial_lock);
- if (serial->rx_state == RX_IDLE) {
+ if (serial->rx_state == RX_IDLE &&
+ serial->open_count > 0) {
/* Setup and send a ctrl req read on
* port i */
- if (!serial->rx_urb_filled[0]) {
+ if (!serial->rx_urb_filled[0]) {
serial->rx_state = RX_SENT;
hso_mux_serial_read(serial);
} else
serial->rx_state = RX_PENDING;
-
} else {
- D1("Already pending a read on "
- "port %d\n", i);
+ D1("Already a read pending on "
+ "port %d or port not open\n", i);
}
spin_unlock(&serial->serial_lock);
}
tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
tty_kref_put(tty);
return;
}
tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
tty_kref_put(tty);
return;
}
serial->tx_data_length = tx_size;
serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
if (!serial->tx_data) {
- dev_err(dev, "%s - Out of memory", __func__);
+ dev_err(dev, "%s - Out of memory\n", __func__);
goto exit;
}
serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
if (!serial->tx_buffer) {
- dev_err(dev, "%s - Out of memory", __func__);
+ dev_err(dev, "%s - Out of memory\n", __func__);
goto exit;
}
INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
+ INIT_WORK(&hso_dev->reset_device, reset_device);
return hso_dev;
}
mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!mux->shared_intr_urb) {
- dev_err(&interface->dev, "Could not allocate intr urb?");
+ dev_err(&interface->dev, "Could not allocate intr urb?\n");
goto exit;
}
- mux->shared_intr_buf = kzalloc(mux->intr_endp->wMaxPacketSize,
- GFP_KERNEL);
+ mux->shared_intr_buf =
+ kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
+ GFP_KERNEL);
if (!mux->shared_intr_buf) {
- dev_err(&interface->dev, "Could not allocate intr buf?");
+ dev_err(&interface->dev, "Could not allocate intr buf?\n");
goto exit;
}
return result;
}
+static void reset_device(struct work_struct *data)
+{
+ struct hso_device *hso_dev =
+ container_of(data, struct hso_device, reset_device);
+ struct usb_device *usb = hso_dev->usb;
+ int result;
+
+ if (hso_dev->usb_gone) {
+ D1("No reset during disconnect\n");
+ } else {
+ result = usb_lock_device_for_reset(usb, hso_dev->interface);
+ if (result < 0)
+ D1("unable to lock device for reset: %d\n", result);
+ else {
+ usb_reset_device(usb);
+ usb_unlock_device(usb);
+ }
+ }
+}
+
static void hso_serial_ref_free(struct kref *ref)
{
struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
usb_rcvintpipe(usb,
shared_int->intr_endp->bEndpointAddress & 0x7F),
shared_int->shared_intr_buf,
- shared_int->intr_endp->wMaxPacketSize,
+ 1,
intr_callback, shared_int,
shared_int->intr_endp->bInterval);
result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
if (result)
- dev_warn(&usb->dev, "%s failed mux_intr_urb %d", __func__,
+ dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
result);
return result;
get_registers(dev, PHYCNT, 1, data);
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
- if (i < MII_TIMEOUT) {
+ if (i <= MII_TIMEOUT) {
get_registers(dev, PHYDAT, 2, data);
*reg = data[0] | (data[1] << 8);
return 0;
get_registers(dev, PHYCNT, 1, data);
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
- if (i < MII_TIMEOUT)
+ if (i <= MII_TIMEOUT)
return 0;
else
return 1;
#include <linux/ethtool.h>
#include <linux/crc32.h>
#include <linux/bitops.h>
+#include <linux/workqueue.h>
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/io.h>
#include <asm/irq.h>
struct net_device *dev;
struct napi_struct napi;
spinlock_t lock;
+ struct work_struct reset_task;
/* Frequently used values: keep some adjacent for cache effect. */
u32 quirks;
static int mdio_read(struct net_device *dev, int phy_id, int location);
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
+static void rhine_reset_task(struct work_struct *work);
static void rhine_tx_timeout(struct net_device *dev);
static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
struct net_device *dev);
dev->irq = pdev->irq;
spin_lock_init(&rp->lock);
+ INIT_WORK(&rp->reset_task, rhine_reset_task);
+
rp->mii_if.dev = dev;
rp->mii_if.mdio_read = mdio_read;
rp->mii_if.mdio_write = mdio_write;
return 0;
}
-static void rhine_tx_timeout(struct net_device *dev)
+static void rhine_reset_task(struct work_struct *work)
{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
- "%4.4x, resetting...\n",
- dev->name, ioread16(ioaddr + IntrStatus),
- mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+ struct rhine_private *rp = container_of(work, struct rhine_private,
+ reset_task);
+ struct net_device *dev = rp->dev;
/* protect against concurrent rx interrupts */
disable_irq(rp->pdev->irq);
napi_disable(&rp->napi);
- spin_lock(&rp->lock);
+ spin_lock_bh(&rp->lock);
/* clear all descriptors */
free_tbufs(dev);
rhine_chip_reset(dev);
init_registers(dev);
- spin_unlock(&rp->lock);
+ spin_unlock_bh(&rp->lock);
enable_irq(rp->pdev->irq);
dev->trans_start = jiffies;
netif_wake_queue(dev);
}
+static void rhine_tx_timeout(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
+ "%4.4x, resetting...\n",
+ dev->name, ioread16(ioaddr + IntrStatus),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+ schedule_work(&rp->reset_task);
+}
+
static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
- spin_lock_irq(&rp->lock);
-
- netif_stop_queue(dev);
napi_disable(&rp->napi);
+ cancel_work_sync(&rp->reset_task);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&rp->lock);
if (debug > 1)
printk(KERN_DEBUG "%s: Shutting down ethercard, "
/* Ensure chip is running */
pci_set_power_state(vptr->pdev, PCI_D0);
- velocity_give_many_rx_descs(vptr);
-
velocity_init_registers(vptr, VELOCITY_INIT_COLD);
ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED,
goto out;
}
+ velocity_give_many_rx_descs(vptr);
+
mac_enable_int(vptr->mac_regs);
netif_start_queue(dev);
napi_enable(&vptr->napi);
dev->mtu = new_mtu;
- velocity_give_many_rx_descs(vptr);
-
velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+ velocity_give_many_rx_descs(vptr);
+
mac_enable_int(vptr->mac_regs);
netif_start_queue(dev);
vi = container_of(work, struct virtnet_info, refill.work);
napi_disable(&vi->napi);
- try_fill_recv(vi, GFP_KERNEL);
- still_empty = (vi->num == 0);
+ still_empty = !try_fill_recv(vi, GFP_KERNEL);
napi_enable(&vi->napi);
/* In theory, this can happen: if we don't get any buffers in
dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data,
rx_priv->data_size, PCI_DMA_FROMDEVICE);
- if (dma_addr == 0) {
+ if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) {
ring->stats.pci_map_fail++;
return -EIO;
}
goto _exit0;
}
- if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
vxge_debug_ll_config(VXGE_TRACE,
"%s : using 64bit DMA", __func__);
high_dma = 1;
if (pci_set_consistent_dma_mask(pdev,
- 0xffffffffffffffffULL)) {
+ DMA_BIT_MASK(64))) {
vxge_debug_init(VXGE_ERR,
"%s : unable to obtain 64bit DMA for "
"consistent allocations", __func__);
ret = -ENOMEM;
goto _exit1;
}
- } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) {
+ } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
vxge_debug_ll_config(VXGE_TRACE,
"%s : using 32bit DMA", __func__);
} else {
/* Device IDs */
USB_DEVICE_ID_I6050 = 0x0186,
+ USB_DEVICE_ID_I6050_2 = 0x0188,
};
u8 rx_size_auto_shrink;
struct dentry *debugfs_dentry;
+ unsigned i6050:1; /* 1 if this is a 6050 based SKU */
};
i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
i2400m->bus_bm_mac_addr_impaired = 0;
- if (id->idProduct == USB_DEVICE_ID_I6050) {
+ switch (id->idProduct) {
+ case USB_DEVICE_ID_I6050:
+ case USB_DEVICE_ID_I6050_2:
+ i2400mu->i6050 = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (i2400mu->i6050) {
i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
i2400mu->endpoint_cfg.bulk_out = 0;
i2400mu->endpoint_cfg.notification = 3;
static
struct usb_device_id i2400mu_id_table[] = {
{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
+ { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
{ USB_DEVICE(0x8086, 0x0181) },
{ USB_DEVICE(0x8086, 0x1403) },
{ USB_DEVICE(0x8086, 0x1405) },
rxs->noise = sc->ah->ah_noise_floor;
rxs->signal = rxs->noise + rs.rs_rssi;
- /* An rssi of 35 indicates you should be able use
- * 54 Mbps reliably. A more elaborate scheme can be used
- * here but it requires a map of SNR/throughput for each
- * possible mode used */
- rxs->qual = rs.rs_rssi * 100 / 35;
-
- /* rssi can be more than 35 though, anything above that
- * should be considered at 100% */
- if (rxs->qual > 100)
- rxs->qual = 100;
-
rxs->antenna = rs.rs_antenna;
rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
*/
ath5k_stop_locked(sc);
+ /* Set PHY calibration interval */
+ ah->ah_cal_intval = ath5k_calinterval;
+
/*
* The basic interface to setting the hardware in a good
* state is ``reset''. On return the hardware is known to
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(ah, false);
-
- /* Set PHY calibration inteval */
- ah->ah_cal_intval = ath5k_calinterval;
-
ret = 0;
done:
mmiowb();
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
int ret;
u16 val;
- u32 cksum, offset;
+ u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
/*
* Read values from EEPROM and store them in the capability structure
* Validate the checksum of the EEPROM date. There are some
* devices with invalid EEPROMs.
*/
- for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+ if (val) {
+ eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+ AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+ eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+ /*
+ * Fail safe check to prevent stupid loops due
+ * to busted EEPROMs. XXX: This value is likely too
+ * big still, waiting on a better value.
+ */
+ if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+ ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: "
+ "%d (0x%04x) max expected: %d (0x%04x)\n",
+ eep_max, eep_max,
+ 3 * AR5K_EEPROM_INFO_MAX,
+ 3 * AR5K_EEPROM_INFO_MAX);
+ return -EIO;
+ }
+ }
+
+ for (cksum = 0, offset = 0; offset < eep_max; offset++) {
AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
cksum ^= val;
}
if (cksum != AR5K_EEPROM_INFO_CKSUM) {
- ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+ ATH5K_ERR(ah->ah_sc, "Invalid EEPROM "
+ "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+ cksum, eep_max,
+ eep_max == AR5K_EEPROM_INFO_MAX ?
+ "default size" : "custom size");
return -EIO;
}
#define AR5K_EEPROM_RFKILL_POLARITY_S 1
#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12
+
#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */
#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
config ATH9K_DEBUGFS
bool "Atheros ath9k debugging"
- depends on ATH9K
+ depends on ATH9K && DEBUG_FS
---help---
Say Y, if you need access to ath9k's statistics for
interrupts, rate control, etc.
/* Macro to expand scalars to 64-bit objects */
-#define ito64(x) (sizeof(x) == 8) ? \
+#define ito64(x) (sizeof(x) == 1) ? \
(((unsigned long long int)(x)) & (0xff)) : \
- (sizeof(x) == 16) ? \
+ (sizeof(x) == 2) ? \
(((unsigned long long int)(x)) & 0xffff) : \
- ((sizeof(x) == 32) ? \
+ ((sizeof(x) == 4) ? \
(((unsigned long long int)(x)) & 0xffffffff) : \
(unsigned long long int)(x))
wait = wait_time;
while (ath9k_hw_numtxpending(ah, q)) {
if ((--wait) == 0) {
- ath_print(common, ATH_DBG_QUEUE,
+ ath_print(common, ATH_DBG_FATAL,
"Failed to stop TX DMA in 100 "
"msec after killing last frame\n");
break;
#define ATH9K_TXERR_XTXOP 0x08
#define ATH9K_TXERR_TIMER_EXPIRED 0x10
#define ATH9K_TX_ACKED 0x20
+#define ATH9K_TXERR_MASK \
+ (ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO | \
+ ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED)
#define ATH9K_TX_BA 0x01
#define ATH9K_TX_PWRMGMT 0x02
struct ieee80211_hw *hw = sc->hw;
int r;
+ /* Stop ANI */
+ del_timer_sync(&common->ani.timer);
+
ath9k_hw_set_interrupts(ah, 0);
ath_drain_all_txq(sc, retry_tx);
ath_stoprecv(sc);
}
}
+ /* Start ANI */
+ ath_start_ani(common);
+
return r;
}
return; /* another wiphy still in use */
}
+ /* Ensure HW is awake when we try to shut it down. */
+ ath9k_ps_wakeup(sc);
+
if (ah->btcoex_hw.enabled) {
ath9k_hw_btcoex_disable(ah);
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
+ ath9k_ps_restore(sc);
+
+ /* Finally, put the chip in FULL SLEEP mode */
ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+ ath9k_ps_wakeup(sc);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
ath_beacon_return(sc, avp);
+ ath9k_ps_restore(sc);
}
sc->sc_flags &= ~SC_OP_BEACONS;
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
+ ath9k_ps_wakeup(sc);
ath_tx_aggr_start(sc, sta, tid, ssn);
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_STOP:
+ ath9k_ps_wakeup(sc);
ath_tx_aggr_stop(sc, sta, tid);
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
+ ath9k_ps_wakeup(sc);
ath_tx_aggr_resume(sc, sta, tid);
+ ath9k_ps_restore(sc);
break;
default:
ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
}
-const static struct ath_bus_ops ath_pci_bus_ops = {
+static const struct ath_bus_ops ath_pci_bus_ops = {
.read_cachesize = ath_pci_read_cachesize,
.cleanup = ath_pci_cleanup,
.eeprom_read = ath_pci_eeprom_read,
if (npend) {
int r;
- ath_print(common, ATH_DBG_XMIT,
+ ath_print(common, ATH_DBG_FATAL,
"Unable to stop TxDMA. Reset HAL!\n");
spin_lock_bh(&sc->sc_resetlock);
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true);
+ r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
if (r)
ath_print(common, ATH_DBG_FATAL,
"Unable to reset hardware; reset status %d\n",
* For HT capable stations, we save tidno for later use.
* We also override seqno set by upper layer with the one
* in tx aggregation state.
- *
- * If fragmentation is on, the sequence number is
- * not overridden, since it has been
- * incremented by the fragmentation routine.
- *
- * FIXME: check if the fragmentation threshold exceeds
- * IEEE80211 max.
*/
tid = ATH_AN_2_TID(an, bf->bf_tidno);
- hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
- IEEE80211_SEQ_SEQ_SHIFT);
+ hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT);
bf->bf_seqno = tid->seq_next;
INCR(tid->seq_next, IEEE80211_SEQ_MAX);
}
bf->bf_keyix = ATH9K_TXKEYIX_INVALID;
}
- if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR))
+ if (ieee80211_is_data_qos(fc) && bf_isht(bf) &&
+ (sc->sc_flags & SC_OP_TXAGGR))
assign_aggr_tid_seqno(skb, bf);
bf->bf_mpdu = skb;
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- int hdrlen, padsize;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ int padpos, padsize;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ath_tx_control txctl;
* BSSes.
*/
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
sc->tx.seq_no += 0x10;
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
}
/* Add the padding after the header if this is not already done */
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- if (hdrlen & 3) {
- padsize = hdrlen % 4;
+ padpos = ath9k_cmn_padpos(hdr->frame_control);
+ padsize = padpos & 3;
+ if (padsize && skb->len>padpos) {
if (skb_headroom(skb) < padsize) {
ath_print(common, ATH_DBG_XMIT,
"TX CABQ padding failed\n");
return;
}
skb_push(skb, padsize);
- memmove(skb->data, skb->data + padsize, hdrlen);
+ memmove(skb->data, skb->data + padsize, padpos);
}
txctl.txq = sc->beacon.cabq;
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- int hdrlen, padsize;
+ struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
+ int padpos, padsize;
ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
tx_info->flags |= IEEE80211_TX_STAT_ACK;
}
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- padsize = hdrlen & 3;
- if (padsize && hdrlen >= 24) {
+ padpos = ath9k_cmn_padpos(hdr->frame_control);
+ padsize = padpos & 3;
+ if (padsize && skb->len>padpos+padsize) {
/*
* Remove MAC header padding before giving the frame back to
* mac80211.
*/
- memmove(skb->data + padsize, skb->data, hdrlen);
+ memmove(skb->data + padsize, skb->data, padpos);
skb_pull(skb, padsize);
}
&txq->axq_q, lastbf->list.prev);
txq->axq_depth--;
- txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT);
+ txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK);
txq->axq_tx_inprogress = false;
spin_unlock_bh(&txq->axq_lock);
}
}
-/* Check if a DMA region fits the device constraints.
- * Returns true, if the region is OK for usage with this device. */
-static inline bool b43_dma_address_ok(struct b43_dmaring *ring,
- dma_addr_t addr, size_t size)
-{
- switch (ring->type) {
- case B43_DMA_30BIT:
- if ((u64)addr + size > (1ULL << 30))
- return 0;
- break;
- case B43_DMA_32BIT:
- if ((u64)addr + size > (1ULL << 32))
- return 0;
- break;
- case B43_DMA_64BIT:
- /* Currently we can't have addresses beyond
- * 64bit in the kernel. */
- break;
- }
- return 1;
-}
-
-#define is_4k_aligned(addr) (((u64)(addr) & 0x0FFFull) == 0)
-#define is_8k_aligned(addr) (((u64)(addr) & 0x1FFFull) == 0)
-
-static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base,
- dma_addr_t dmaaddr, size_t size)
-{
- ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE);
- free_pages((unsigned long)base, get_order(size));
-}
-
-static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring,
- dma_addr_t *dmaaddr, size_t size,
- gfp_t gfp_flags)
-{
- void *base;
-
- base = (void *)__get_free_pages(gfp_flags, get_order(size));
- if (!base)
- return NULL;
- memset(base, 0, size);
- *dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size,
- DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) {
- free_pages((unsigned long)base, get_order(size));
- return NULL;
- }
-
- return base;
-}
-
-static void * b43_get_and_map_ringmem(struct b43_dmaring *ring,
- dma_addr_t *dmaaddr, size_t size)
-{
- void *base;
-
- base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
- GFP_KERNEL);
- if (!base) {
- b43err(ring->dev->wl, "Failed to allocate or map pages "
- "for DMA ringmemory\n");
- return NULL;
- }
- if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
- /* The memory does not fit our device constraints.
- * Retry with GFP_DMA set to get lower memory. */
- b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
- base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
- GFP_KERNEL | GFP_DMA);
- if (!base) {
- b43err(ring->dev->wl, "Failed to allocate or map pages "
- "in the GFP_DMA region for DMA ringmemory\n");
- return NULL;
- }
- if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
- b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
- b43err(ring->dev->wl, "Failed to allocate DMA "
- "ringmemory that fits device constraints\n");
- return NULL;
- }
- }
- /* We expect the memory to be 4k aligned, at least. */
- if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) {
- b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
- return NULL;
- }
-
- return base;
-}
-
static int alloc_ringmemory(struct b43_dmaring *ring)
{
- unsigned int required;
- void *base;
- dma_addr_t dmaaddr;
-
- /* There are several requirements to the descriptor ring memory:
- * - The memory region needs to fit the address constraints for the
- * device (same as for frame buffers).
- * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned.
- * - For 64bit DMA devices, the descriptor ring must be 8k aligned.
+ gfp_t flags = GFP_KERNEL;
+
+ /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
+ * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing
+ * has shown that 4K is sufficient for the latter as long as the buffer
+ * does not cross an 8K boundary.
+ *
+ * For unknown reasons - possibly a hardware error - the BCM4311 rev
+ * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
+ * which accounts for the GFP_DMA flag below.
+ *
+ * The flags here must match the flags in free_ringmemory below!
*/
-
if (ring->type == B43_DMA_64BIT)
- required = ring->nr_slots * sizeof(struct b43_dmadesc64);
- else
- required = ring->nr_slots * sizeof(struct b43_dmadesc32);
- if (B43_WARN_ON(required > 0x1000))
+ flags |= GFP_DMA;
+ ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+ B43_DMA_RINGMEMSIZE,
+ &(ring->dmabase), flags);
+ if (!ring->descbase) {
+ b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
return -ENOMEM;
-
- ring->alloc_descsize = 0x1000;
- base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
- if (!base)
- return -ENOMEM;
- ring->alloc_descbase = base;
- ring->alloc_dmabase = dmaaddr;
-
- if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) {
- /* We're on <=32bit DMA, or we already got 8k aligned memory.
- * That's all we need, so we're fine. */
- ring->descbase = base;
- ring->dmabase = dmaaddr;
- return 0;
- }
- b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize);
-
- /* Ok, we failed at the 8k alignment requirement.
- * Try to force-align the memory region now. */
- ring->alloc_descsize = 0x2000;
- base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
- if (!base)
- return -ENOMEM;
- ring->alloc_descbase = base;
- ring->alloc_dmabase = dmaaddr;
-
- if (is_8k_aligned(dmaaddr)) {
- /* We're already 8k aligned. That Ok, too. */
- ring->descbase = base;
- ring->dmabase = dmaaddr;
- return 0;
}
- /* Force-align it to 8k */
- ring->descbase = (void *)((u8 *)base + 0x1000);
- ring->dmabase = dmaaddr + 0x1000;
- B43_WARN_ON(!is_8k_aligned(ring->dmabase));
+ memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE);
return 0;
}
static void free_ringmemory(struct b43_dmaring *ring)
{
- b43_unmap_and_free_ringmem(ring, ring->alloc_descbase,
- ring->alloc_dmabase, ring->alloc_descsize);
+ gfp_t flags = GFP_KERNEL;
+
+ if (ring->type == B43_DMA_64BIT)
+ flags |= GFP_DMA;
+
+ ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
+ ring->descbase, ring->dmabase, flags);
}
/* Reset the RX DMA channel */
if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
return 1;
- if (!b43_dma_address_ok(ring, addr, buffersize)) {
- /* We can't support this address. Unmap it again. */
- unmap_descbuffer(ring, addr, buffersize, dma_to_device);
- return 1;
+ switch (ring->type) {
+ case B43_DMA_30BIT:
+ if ((u64)addr + buffersize > (1ULL << 30))
+ goto address_error;
+ break;
+ case B43_DMA_32BIT:
+ if ((u64)addr + buffersize > (1ULL << 32))
+ goto address_error;
+ break;
+ case B43_DMA_64BIT:
+ /* Currently we can't have addresses beyond
+ * 64bit in the kernel. */
+ break;
}
/* The address is OK. */
return 0;
+
+address_error:
+ /* We can't support this address. Unmap it again. */
+ unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+
+ return 1;
}
static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
meta->dmaaddr = dmaaddr;
ring->ops->fill_descriptor(ring, desc, dmaaddr,
ring->rx_buffersize, 0, 0, 0);
- ssb_dma_sync_single_for_device(ring->dev->dev,
- ring->alloc_dmabase,
- ring->alloc_descsize, DMA_TO_DEVICE);
return 0;
}
}
/* Now transfer the whole frame. */
wmb();
- ssb_dma_sync_single_for_device(ring->dev->dev,
- ring->alloc_dmabase,
- ring->alloc_descsize, DMA_TO_DEVICE);
ops->poke_tx(ring, next_slot(ring, slot));
return 0;
} __attribute__ ((__packed__));
/* Misc DMA constants */
+#define B43_DMA_RINGMEMSIZE PAGE_SIZE
#define B43_DMA0_RX_FRAMEOFFSET 30
/* DMA engine tuning knobs */
/* The QOS priority assigned to this ring. Only used for TX rings.
* This is the mac80211 "queue" value. */
u8 queue_prio;
- /* Pointers and size of the originally allocated and mapped memory
- * region for the descriptor ring. */
- void *alloc_descbase;
- dma_addr_t alloc_dmabase;
- unsigned int alloc_descsize;
- /* Pointer to our wireless device. */
struct b43_wldev *dev;
#ifdef CONFIG_B43_DEBUG
/* Maximum number of used slots. */
snr = rx_stats_sig_avg / rx_stats_noise_diff;
rx_status.noise = rx_status.signal -
iwl3945_calc_db_from_ratio(snr);
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
- rx_status.noise);
-
- /* If noise info not available, calculate signal quality indicator (%)
- * using just the dBm signal level. */
} else {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
}
- IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
+ rx_status.signal, rx_status.noise,
rx_stats_sig_avg, rx_stats_noise_diff);
header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
rc = -EIO;
}
- priv->alloc_rxb_page--;
- free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
+ iwl_free_pages(priv, cmd.reply_page);
return rc;
}
.use_isr_legacy = true,
.ht_greenfield_support = false,
.led_compensation = 64,
+ .broken_powersave = true,
};
static struct iwl_cfg iwl3945_abg_cfg = {
.use_isr_legacy = true,
.ht_greenfield_support = false,
.led_compensation = 64,
+ .broken_powersave = true,
};
struct pci_device_id iwl3945_hw_card_ids[] = {
*
*****************************************************************************/
extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
extern void iwl3945_rx_replenish(void *data);
extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
/* calculate tx gain adjustment based on power supply voltage */
- voltage = priv->calib_info->voltage;
+ voltage = le16_to_cpu(priv->calib_info->voltage);
init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
voltage_compensation =
iwl4965_get_voltage_compensation(voltage, init_voltage);
struct ieee80211_tx_info *info;
struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->u.status);
- int tid = MAX_TID_COUNT;
+ int uninitialized_var(tid);
int sta_id;
int freed;
u8 *qc = NULL;
static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
{
- u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
- EEPROM_5000_TEMPERATURE);
- /* offset = temperature - voltage / coef */
- s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
- return offset;
+ u16 temperature, voltage;
+ __le16 *temp_calib =
+ (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_TEMPERATURE);
+
+ temperature = le16_to_cpu(temp_calib[0]);
+ voltage = le16_to_cpu(temp_calib[1]);
+
+ /* offset = temp - volt / coeff */
+ return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
}
/* Fixed (non-configurable) rx data from phy */
static int iwl5000_set_Xtal_calib(struct iwl_priv *priv)
{
struct iwl_calib_xtal_freq_cmd cmd;
- u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
+ __le16 *xtal_calib =
+ (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
cmd.hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD;
cmd.hdr.first_group = 0;
cmd.hdr.groups_num = 1;
cmd.hdr.data_valid = 1;
- cmd.cap_pin1 = (u8)xtal_calib[0];
- cmd.cap_pin2 = (u8)xtal_calib[1];
+ cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
+ cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL],
(u8 *)&cmd, sizeof(cmd));
}
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
};
/* mbps, mcs */
-const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
{ "1", "BPSK DSSS"},
{ "2", "QPSK DSSS"},
{"5.5", "BPSK CCK"},
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS))
+ if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
#else
priv->ibss_beacon = NULL;
- spin_lock_init(&priv->lock);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
(unsigned long long) pci_resource_len(pdev, 0));
IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
- /* this spin lock will be used in apm_ops.init and EEPROM access
+ /* these spin locks will be used in apm_ops.init and EEPROM access
* we should init now
*/
spin_lock_init(&priv->reg_lock);
+ spin_lock_init(&priv->lock);
iwl_hw_detect(priv);
IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n",
priv->cfg->name, priv->hw_rev);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
+static inline void iwl_set_no_assoc(struct iwl_priv *priv)
+{
+ priv->assoc_id = 0;
+ iwl_led_disassociate(priv);
+ /*
+ * inform the ucode that there is no longer an
+ * association and that no more packets should be
+ * sent
+ */
+ priv->staging_rxon.filter_flags &=
+ ~RXON_FILTER_ASSOC_MSK;
+ priv->staging_rxon.assoc_id = 0;
+ iwlcore_commit_rxon(priv);
+}
+
#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
if (!iwl_is_rfkill(priv))
priv->cfg->ops->lib->post_associate(priv);
- } else {
- priv->assoc_id = 0;
- iwl_led_disassociate(priv);
-
- /*
- * inform the ucode that there is no longer an
- * association and that no more packets should be
- * send
- */
- priv->staging_rxon.filter_flags &=
- ~RXON_FILTER_ASSOC_MSK;
- priv->staging_rxon.assoc_id = 0;
- iwlcore_commit_rxon(priv);
- }
+ } else
+ iwl_set_no_assoc(priv);
}
if (changes && iwl_is_associated(priv) && priv->assoc_id) {
}
}
- if ((changes & BSS_CHANGED_BEACON_ENABLED) &&
- vif->bss_conf.enable_beacon) {
- memcpy(priv->staging_rxon.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- iwlcore_config_ap(priv);
+ if (changes & BSS_CHANGED_BEACON_ENABLED) {
+ if (vif->bss_conf.enable_beacon) {
+ memcpy(priv->staging_rxon.bssid_addr,
+ bss_conf->bssid, ETH_ALEN);
+ memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+ iwlcore_config_ap(priv);
+ } else
+ iwl_set_no_assoc(priv);
}
mutex_unlock(&priv->mutex);
* The MAC (uCode processor, etc.) does not need to be powered up for accessing
* the CSR registers.
*
- * NOTE: Newer devices using one-time-programmable (OTP) memory
- * require device to be awake in order to read this memory
+ * NOTE: Device does need to be awake in order to read this memory
* via CSR_EEPROM and CSR_OTP registers
*/
#define CSR_BASE (0x000)
/*
* EEPROM and OTP (one-time-programmable) memory reads
*
- * NOTE: For (newer) devices using OTP, device must be awake, initialized via
- * apm_ops.init() in order to read. Older devices (3945/4965/5000)
- * use EEPROM and do not require this.
+ * NOTE: Device must be awake, initialized via apm_ops.init(),
+ * in order to read.
*/
#define CSR_EEPROM_REG (CSR_BASE+0x02c)
#define CSR_EEPROM_GP (CSR_BASE+0x030)
extern int iwl_queue_space(const struct iwl_queue *q);
static inline int iwl_queue_used(const struct iwl_queue *q, int i)
{
- return q->write_ptr > q->read_ptr ?
+ return q->write_ptr >= q->read_ptr ?
(i >= q->read_ptr && i < q->write_ptr) :
!(i < q->read_ptr && i >= q->write_ptr);
}
u32 last_beacon_time;
u64 last_tsf;
- /* eeprom */
+ /* eeprom -- this is in the card's little endian byte order */
u8 *eeprom;
int nvm_device_type;
struct iwl_eeprom_calib_info *calib_info;
return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
}
+static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page)
+{
+ __free_pages(page, priv->hw_params.rx_page_order);
+ priv->alloc_rxb_page--;
+}
+
+static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page)
+{
+ free_pages(page, priv->hw_params.rx_page_order);
+ priv->alloc_rxb_page--;
+}
#endif /* __iwl_dev_h__ */
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
#include <linux/module.h>
/* sparse doesn't like tracepoint macros */
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
#if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ)
#define __IWLWIFI_DEVICE_TRACE
return ret;
}
-static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data)
+static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, __le16 *eeprom_data)
{
int ret = 0;
u32 r;
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
}
- *eeprom_data = le16_to_cpu((__force __le16)(r >> 16));
+ *eeprom_data = cpu_to_le16(r >> 16);
return 0;
}
*/
static bool iwl_is_otp_empty(struct iwl_priv *priv)
{
- u16 next_link_addr = 0, link_value;
+ u16 next_link_addr = 0;
+ __le16 link_value;
bool is_empty = false;
/* locate the beginning of OTP link list */
static int iwl_find_otp_image(struct iwl_priv *priv,
u16 *validblockaddr)
{
- u16 next_link_addr = 0, link_value = 0, valid_addr;
+ u16 next_link_addr = 0, valid_addr;
+ __le16 link_value = 0;
int usedblocks = 0;
/* set addressing mode to absolute to traverse the link list */
* check for more block on the link list
*/
valid_addr = next_link_addr;
- next_link_addr = link_value * sizeof(u16);
+ next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
usedblocks, next_link_addr);
if (iwl_read_otp_word(priv, next_link_addr, &link_value))
*/
int iwl_eeprom_init(struct iwl_priv *priv)
{
- u16 *e;
+ __le16 *e;
u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
int sz;
int ret;
ret = -ENOMEM;
goto alloc_err;
}
- e = (u16 *)priv->eeprom;
+ e = (__le16 *)priv->eeprom;
- if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
- /* OTP reads require powered-up chip */
- priv->cfg->ops->lib->apm_ops.init(priv);
- }
+ priv->cfg->ops->lib->apm_ops.init(priv);
ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
if (ret < 0) {
}
for (addr = validblockaddr; addr < validblockaddr + sz;
addr += sizeof(u16)) {
- u16 eeprom_data;
+ __le16 eeprom_data;
ret = iwl_read_otp_word(priv, addr, &eeprom_data);
if (ret)
e[cache_addr / 2] = eeprom_data;
cache_addr += sizeof(u16);
}
-
- /*
- * Now that OTP reads are complete, reset chip to save
- * power until we load uCode during "up".
- */
- priv->cfg->ops->lib->apm_ops.stop(priv);
-
} else {
/* eeprom is an array of 16bit values */
for (addr = 0; addr < sz; addr += sizeof(u16)) {
goto done;
}
r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
- e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
+ e[addr / 2] = cpu_to_le16(r >> 16);
}
}
ret = 0;
err:
if (ret)
iwl_eeprom_free(priv);
+ /* Reset chip to save power until we load uCode during "up". */
+ priv->cfg->ops->lib->apm_ops.stop(priv);
alloc_err:
return ret;
}
ch_info->ht40_eeprom = *eeprom_ch;
ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
ch_info->ht40_flags = eeprom_ch->flags;
- ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
+ if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
+ ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
return 0;
}
*
*/
struct iwl_eeprom_enhanced_txpwr {
- u16 common;
+ __le16 common;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
struct iwl_eeprom_calib_info {
u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
u8 saturation_power52; /* half-dBm */
- s16 voltage; /* signed */
+ __le16 voltage; /* signed */
struct iwl_eeprom_calib_subband_info
band_info[EEPROM_TX_POWER_BANDS];
} __attribute__ ((packed));
}
fail:
if (cmd->reply_page) {
- free_pages(cmd->reply_page, priv->hw_params.rx_page_order);
+ iwl_free_pages(priv, cmd->reply_page);
cmd->reply_page = 0;
}
out:
pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
PAGE_SIZE << priv->hw_params.rx_page_order,
PCI_DMA_FROMDEVICE);
- __free_pages(rxq->pool[i].page,
- priv->hw_params.rx_page_order);
+ __iwl_free_pages(priv, rxq->pool[i].page);
rxq->pool[i].page = NULL;
- priv->alloc_rxb_page--;
}
}
pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
PAGE_SIZE << priv->hw_params.rx_page_order,
PCI_DMA_FROMDEVICE);
- priv->alloc_rxb_page--;
- __free_pages(rxq->pool[i].page,
- priv->hw_params.rx_page_order);
+ __iwl_free_pages(priv, rxq->pool[i].page);
rxq->pool[i].page = NULL;
}
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
}
EXPORT_SYMBOL(iwl_reply_statistics);
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/* Calc max signal level (dBm) among 3 possible receivers */
static inline int iwl_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp)
if (iwl_is_associated(priv) &&
!test_bit(STATUS_SCANNING, &priv->status)) {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
- rx_status.noise);
} else {
rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
}
/* Reset beacon noise level if not associated. */
iwl_dbg_report_frame(priv, phy_res, len, header, 1);
#endif
iwl_dbg_log_rx_data_frame(priv, len, header);
- IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+ rx_status.signal, rx_status.noise,
(unsigned long long)rx_status.mactime);
/*
clear_bit(STATUS_SCAN_HW, &priv->status);
}
- priv->alloc_rxb_page--;
- free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
+ iwl_free_pages(priv, cmd.reply_page);
return ret;
}
break;
}
}
-
- priv->alloc_rxb_page--;
- free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
+ iwl_free_pages(priv, cmd.reply_page);
return ret;
}
break;
}
}
-
- priv->alloc_rxb_page--;
- free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
+ iwl_free_pages(priv, cmd.reply_page);
return ret;
}
int txq_id;
/* Tx queues */
- if (priv->txq)
+ if (priv->txq) {
for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
txq_id++)
if (txq_id == IWL_CMD_QUEUE_NUM)
iwl_cmd_queue_free(priv);
else
iwl_tx_queue_free(priv, txq_id);
+ }
iwl_free_dma_ptr(priv, &priv->kw);
iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
txq = &priv->txq[txq_id];
q = &txq->q;
+ if ((iwl_queue_space(q) < q->high_mark))
+ goto drop;
+
spin_lock_irqsave(&priv->lock, flags);
idx = get_cmd_index(q, q->write_ptr, 0);
break;
}
- free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
+ iwl_free_pages(priv, cmd.reply_page);
return rc;
}
pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
PAGE_SIZE << priv->hw_params.rx_page_order,
PCI_DMA_FROMDEVICE);
- priv->alloc_rxb_page--;
- __free_pages(rxq->pool[i].page,
- priv->hw_params.rx_page_order);
+ __iwl_free_pages(priv, rxq->pool[i].page);
rxq->pool[i].page = NULL;
}
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
PAGE_SIZE << priv->hw_params.rx_page_order,
PCI_DMA_FROMDEVICE);
- __free_pages(rxq->pool[i].page,
- priv->hw_params.rx_page_order);
+ __iwl_free_pages(priv, rxq->pool[i].page);
rxq->pool[i].page = NULL;
- priv->alloc_rxb_page--;
}
}
return (int)ratio2dB[sig_ratio];
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/**
* iwl3945_rx_handle - Main entry function for receiving responses from uCode
*
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS))
+ if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
#else
priv->retry_rate = 1;
priv->ibss_beacon = NULL;
- spin_lock_init(&priv->lock);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM |
- IEEE80211_HW_SPECTRUM_MGMT |
- IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+ IEEE80211_HW_SPECTRUM_MGMT;
+
+ if (!priv->cfg->broken_powersave)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
* PCI Tx retries from interfering with C3 CPU state */
pci_write_config_byte(pdev, 0x41, 0x00);
- /* this spin lock will be used in apm_ops.init and EEPROM access
+ /* these spin locks will be used in apm_ops.init and EEPROM access
* we should init now
*/
spin_lock_init(&priv->reg_lock);
+ spin_lock_init(&priv->lock);
/***********************
* 4. Read EEPROM
memset(&update, 0, sizeof(struct iwm_umac_pmkid_update));
+ update.hdr.oid = UMAC_WIFI_IF_CMD_PMKID_UPDATE;
+ update.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_pmkid_update) -
+ sizeof(struct iwm_umac_wifi_if));
+
update.command = cpu_to_le32(command);
if (pmksa->bssid)
memcpy(&update.bssid, pmksa->bssid, ETH_ALEN);
#define IWM_CMD_PMKID_FLUSH 3
struct iwm_umac_pmkid_update {
+ struct iwm_umac_wifi_if hdr;
__le32 command;
u8 bssid[ETH_ALEN];
__le16 reserved;
struct sk_buff_head rx_list;
struct list_head rx_tickets;
- struct list_head rx_packets[IWM_RX_ID_HASH];
+ struct list_head rx_packets[IWM_RX_ID_HASH + 1];
struct workqueue_struct *rx_wq;
struct work_struct rx_worker;
int iwm_down(struct iwm_priv *iwm);
/* TX API */
-u16 iwm_tid_to_queue(u16 tid);
+int iwm_tid_to_queue(u16 tid);
void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages);
void iwm_tx_worker(struct work_struct *work);
int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
*/
static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
-u16 iwm_tid_to_queue(u16 tid)
+int iwm_tid_to_queue(u16 tid)
{
if (tid > IWM_UMAC_TID_NR - 2)
return -EINVAL;
if (!stop) {
struct iwm_tx_queue *txq;
- u16 queue = iwm_tid_to_queue(bit);
+ int queue = iwm_tid_to_queue(bit);
if (queue < 0)
continue;
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
+#include <linux/if_ether.h>
#include <linux/if_arp.h>
#include <linux/kthread.h>
#include <linux/kfifo.h>
mesh_dev->netdev_ops = &mesh_netdev_ops;
mesh_dev->ethtool_ops = &lbs_ethtool_ops;
- memcpy(mesh_dev->dev_addr, priv->dev->dev_addr,
- sizeof(priv->dev->dev_addr));
+ memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN);
SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
chan_count = lbs_scan_create_channel_list(priv, chan_list);
netif_stop_queue(priv->dev);
- netif_carrier_off(priv->dev);
- if (priv->mesh_dev) {
+ if (priv->mesh_dev)
netif_stop_queue(priv->mesh_dev);
- netif_carrier_off(priv->mesh_dev);
- }
/* Prepare to continue an interrupted scan */
lbs_deb_scan("chan_count %d, scan_channel %d\n",
priv->scan_channel = 0;
out:
- if (priv->connect_status == LBS_CONNECTED) {
- netif_carrier_on(priv->dev);
- if (!priv->tx_pending_len)
- netif_wake_queue(priv->dev);
- }
- if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) {
- netif_carrier_on(priv->mesh_dev);
- if (!priv->tx_pending_len)
- netif_wake_queue(priv->mesh_dev);
- }
+ if (priv->connect_status == LBS_CONNECTED && !priv->tx_pending_len)
+ netif_wake_queue(priv->dev);
+
+ if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED) &&
+ !priv->tx_pending_len)
+ netif_wake_queue(priv->mesh_dev);
+
kfree(chan_list);
lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
if (priv->connect_status == LBS_CONNECTED) {
memcpy(extra, priv->curbssparams.ssid,
priv->curbssparams.ssid_len);
- extra[priv->curbssparams.ssid_len] = '\0';
} else {
memset(extra, 0, 32);
- extra[priv->curbssparams.ssid_len] = '\0';
}
/*
* If none, we may want to get the one that was set
stats.band = IEEE80211_BAND_2GHZ;
stats.signal = prxpd->snr;
stats.noise = prxpd->nf;
- stats.qual = prxpd->snr - prxpd->nf;
/* Marvell rate index has a hole at value 4 */
if (prxpd->rx_rate > 4)
--prxpd->rx_rate;
/* Clear unsupported feature flags */
*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
- if (mwl8k_fw_lock(hw))
+ if (mwl8k_fw_lock(hw)) {
+ kfree(cmd);
return;
+ }
if (priv->sniffer_enabled) {
mwl8k_enable_sniffer(hw, 0);
#define MAX_RID_LEN 1024
/* Helper routine to record keys
- * Do not call from interrupt context */
+ * It is called under orinoco_lock so it may not sleep */
static int orinoco_set_key(struct orinoco_private *priv, int index,
enum orinoco_alg alg, const u8 *key, int key_len,
const u8 *seq, int seq_len)
kzfree(priv->keys[index].seq);
if (key_len) {
- priv->keys[index].key = kzalloc(key_len, GFP_KERNEL);
+ priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC);
if (!priv->keys[index].key)
goto nomem;
} else
priv->keys[index].key = NULL;
if (seq_len) {
- priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL);
+ priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC);
if (!priv->keys[index].seq)
goto free_key;
} else
i %= ring_limit;
continue;
}
+
+ if (unlikely(len > priv->common.rx_mtu)) {
+ if (net_ratelimit())
+ dev_err(&priv->pdev->dev, "rx'd frame size "
+ "exceeds length threshold.\n");
+
+ len = priv->common.rx_mtu;
+ }
skb_put(skb, len);
if (p54_rx(dev, skb)) {
#define PAIRWISE_KEY_ENTRY(__idx) \
( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
#define MAC_IVEIV_ENTRY(__idx) \
- ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+ ( MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)) )
#define MAC_WCID_ATTR_ENTRY(__idx) \
( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
#define SHARED_KEY_ENTRY(__idx) \
#include <linux/module.h>
#include "rt2x00.h"
-#ifdef CONFIG_RT2800USB
+#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE)
#include "rt2x00usb.h"
#endif
#include "rt2800lib.h"
rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3);
rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
if (rt2x00_intf_is_usb(rt2x00dev)) {
rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-#ifdef CONFIG_RT2800USB
+#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE)
rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
USB_MODE_RESET, REGISTER_TIMEOUT);
#endif
unsigned int i;
u16 eeprom;
+ /*
+ * Disable powersaving as default on PCI devices.
+ */
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
/*
* Initialize all hw fields.
*/
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40 |
IEEE80211_HT_CAP_TX_STBC |
- IEEE80211_HT_CAP_RX_STBC |
- IEEE80211_HT_CAP_PSMP_SUPPORT;
+ IEEE80211_HT_CAP_RX_STBC;
spec->ht.ampdu_factor = 3;
spec->ht.ampdu_density = 4;
spec->ht.mcs.tx_params =
rt2800_register_multiread(rt2x00dev, offset,
&iveiv_entry, sizeof(iveiv_entry));
- memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
- memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+ memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
+ memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
}
static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
#define ALIGN_SIZE(__skb, __header) \
( ((unsigned long)((__skb)->data + (__header))) & 3 )
+/*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */
+#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */
+
/*
* Standard timing and size defines.
* These values should follow the ieee80211 specifications.
/*
* Initialize extra TX headroom required.
*/
- rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+ rt2x00dev->hw->extra_tx_headroom =
+ max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+ rt2x00dev->ops->extra_tx_headroom);
+
+ /*
+ * Take TX headroom required for alignment into account.
+ */
+ if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+ else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
/*
* Register HW.
* is also mapped to the DMA so it can be used for transfering
* additional descriptor information to the hardware.
*/
- skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->skb_dma =
dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
/*
* Restore data pointer to original location again.
*/
- skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
}
* by the driver, but it was actually mapped to DMA.
*/
dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
- skb->len + rt2x00dev->hw->extra_tx_headroom,
+ skb->len + rt2x00dev->ops->extra_tx_headroom,
DMA_TO_DEVICE);
skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
}
char *tx_power;
unsigned int i;
+ /*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
/*
* Initialize all hw fields.
*/
rx_status.antenna = (flags2 >> 15) & 1;
/* TODO: improve signal/rssi reporting */
- rx_status.qual = flags2 & 0xFF;
rx_status.signal = (flags2 >> 8) & 0x7F;
/* XXX: is this correct? */
rx_status.rate_idx = (flags >> 20) & 0xF;
}
}
- if (loop >= INIT_LOOP) {
+ if (loop > INIT_LOOP) {
wl1251_error("timeout waiting for the hardware to "
"complete initialization");
return -EIO;
return ret;
}
-static int wl1271_build_basic_rates(char *rates, u8 band)
+static int wl1271_build_basic_rates(u8 *rates, u8 band)
{
u8 index = 0;
return index;
}
-static int wl1271_build_extended_rates(char *rates, u8 band)
+static int wl1271_build_extended_rates(u8 *rates, u8 band)
{
u8 index = 0;
return r;
}
-static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size)
-{
- static const u16 constants[] = {
- 715, 655, 585, 540, 470, 410, 360, 315,
- 270, 235, 205, 175, 150, 125, 105, 85,
- 65, 50, 40, 25, 15
- };
-
- int i;
- u32 x;
-
- /* It seems that their quality parameter is somehow per signal
- * and is now transferred per bit.
- */
- switch (zd_rate) {
- case ZD_OFDM_RATE_6M:
- case ZD_OFDM_RATE_12M:
- case ZD_OFDM_RATE_24M:
- size *= 2;
- break;
- case ZD_OFDM_RATE_9M:
- case ZD_OFDM_RATE_18M:
- case ZD_OFDM_RATE_36M:
- case ZD_OFDM_RATE_54M:
- size *= 4;
- size /= 3;
- break;
- case ZD_OFDM_RATE_48M:
- size *= 3;
- size /= 2;
- break;
- default:
- return -EINVAL;
- }
-
- x = (10000 * status_quality)/size;
- for (i = 0; i < ARRAY_SIZE(constants); i++) {
- if (x > constants[i])
- break;
- }
-
- switch (zd_rate) {
- case ZD_OFDM_RATE_6M:
- case ZD_OFDM_RATE_9M:
- i += 3;
- break;
- case ZD_OFDM_RATE_12M:
- case ZD_OFDM_RATE_18M:
- i += 5;
- break;
- case ZD_OFDM_RATE_24M:
- case ZD_OFDM_RATE_36M:
- i += 9;
- break;
- case ZD_OFDM_RATE_48M:
- case ZD_OFDM_RATE_54M:
- i += 15;
- break;
- default:
- return -EINVAL;
- }
-
- return i;
-}
-
-static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size)
-{
- int r;
-
- r = ofdm_qual_db(status_quality, zd_rate, size);
- ZD_ASSERT(r >= 0);
- if (r < 0)
- r = 0;
-
- r = (r * 100)/29;
- return r <= 100 ? r : 100;
-}
-
-static unsigned int log10times100(unsigned int x)
-{
- static const u8 log10[] = {
- 0,
- 0, 30, 47, 60, 69, 77, 84, 90, 95, 100,
- 104, 107, 111, 114, 117, 120, 123, 125, 127, 130,
- 132, 134, 136, 138, 139, 141, 143, 144, 146, 147,
- 149, 150, 151, 153, 154, 155, 156, 157, 159, 160,
- 161, 162, 163, 164, 165, 166, 167, 168, 169, 169,
- 170, 171, 172, 173, 174, 174, 175, 176, 177, 177,
- 178, 179, 179, 180, 181, 181, 182, 183, 183, 184,
- 185, 185, 186, 186, 187, 188, 188, 189, 189, 190,
- 190, 191, 191, 192, 192, 193, 193, 194, 194, 195,
- 195, 196, 196, 197, 197, 198, 198, 199, 199, 200,
- 200, 200, 201, 201, 202, 202, 202, 203, 203, 204,
- 204, 204, 205, 205, 206, 206, 206, 207, 207, 207,
- 208, 208, 208, 209, 209, 210, 210, 210, 211, 211,
- 211, 212, 212, 212, 213, 213, 213, 213, 214, 214,
- 214, 215, 215, 215, 216, 216, 216, 217, 217, 217,
- 217, 218, 218, 218, 219, 219, 219, 219, 220, 220,
- 220, 220, 221, 221, 221, 222, 222, 222, 222, 223,
- 223, 223, 223, 224, 224, 224, 224,
- };
-
- return x < ARRAY_SIZE(log10) ? log10[x] : 225;
-}
-
-enum {
- MAX_CCK_EVM_DB = 45,
-};
-
-static int cck_evm_db(u8 status_quality)
-{
- return (20 * log10times100(status_quality)) / 100;
-}
-
-static int cck_snr_db(u8 status_quality)
-{
- int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality);
- ZD_ASSERT(r >= 0);
- return r;
-}
-
-static int cck_qual_percent(u8 status_quality)
-{
- int r;
-
- r = cck_snr_db(status_quality);
- r = (100*r)/17;
- return r <= 100 ? r : 100;
-}
-
static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame)
{
return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame);
}
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
- const struct rx_status *status)
-{
- return (status->frame_status&ZD_RX_OFDM) ?
- ofdm_qual_percent(status->signal_quality_ofdm,
- zd_rate_from_ofdm_plcp_header(rx_frame),
- size) :
- cck_qual_percent(status->signal_quality_cck);
-}
-
/**
* zd_rx_rate - report zd-rate
* @rx_frame - received frame
struct rx_status;
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
- const struct rx_status *status);
-
u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
struct zd_mc_hash {
stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
stats.band = IEEE80211_BAND_2GHZ;
stats.signal = status->signal_strength;
- stats.qual = zd_rx_qual_percent(buffer,
- length - sizeof(struct rx_status),
- status);
rate = zd_rx_rate(buffer, status);
changed_flags &= SUPPORTED_FIF_FLAGS;
*new_flags &= SUPPORTED_FIF_FLAGS;
- /* changed_flags is always populated but this driver
- * doesn't support all FIF flags so its possible we don't
- * need to do anything */
- if (!changed_flags)
- return;
-
+ /*
+ * If multicast parameter (as returned by zd_op_prepare_multicast)
+ * has changed, no bit in changed_flags is set. To handle this
+ * situation, we do not return if changed_flags is 0. If we do so,
+ * we will have some issue with IPv6 which uses multicast for link
+ * layer address resolution.
+ */
if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI))
zd_mc_add_all(&hash);
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
-/* AMD PCIX bridge registers */
+/* AMD PCI-X bridge registers */
#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
#define PCIX_MISCII_OFFSET 0x48
#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
int segment; /* PCI domain */
u8 bus; /* PCI bus number */
u8 devfn; /* PCI devfn number */
- struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
+ struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */
struct intel_iommu *iommu; /* IOMMU used by this device */
struct dmar_domain *domain; /* pointer to domain */
};
return ret;
parent = parent->bus->self;
}
- if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
+ if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
return domain_context_mapping_one(domain,
pci_domain_nr(tmp->subordinate),
tmp->subordinate->number, 0,
parent->devfn);
parent = parent->bus->self;
}
- if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
+ if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
iommu_detach_dev(iommu,
tmp->subordinate->number, 0);
else /* this is a legacy PCI bridge */
bridge = pci_find_upstream_pcie_bridge(dev);
if (bridge) {
- if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */
+ if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */
set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
(bridge->bus->number << 8) | dev->bus->number);
else /* this is a legacy PCI bridge */
static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable)
{
while (bus->parent) {
- struct pci_dev *bridge = bus->self;
- int ret;
-
- ret = acpi_pm_device_sleep_wake(&bridge->dev, enable);
- if (!ret || pci_is_pcie(bridge))
+ if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable))
return;
bus = bus->parent;
}
if (acpi_pci_can_wakeup(dev))
return acpi_pm_device_sleep_wake(&dev->dev, enable);
- if (!pci_is_pcie(dev))
- acpi_pci_propagate_wakeup_enable(dev->bus, enable);
-
+ acpi_pci_propagate_wakeup_enable(dev->bus, enable);
return 0;
}
int len;
#ifdef CONFIG_NUMA
- mask = cpumask_of_node(dev_to_node(dev));
+ mask = (dev_to_node(dev) == -1) ? cpu_online_mask :
+ cpumask_of_node(dev_to_node(dev));
#else
mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
#endif
int len;
#ifdef CONFIG_NUMA
- mask = cpumask_of_node(dev_to_node(dev));
+ mask = (dev_to_node(dev) == -1) ? cpu_online_mask :
+ cpumask_of_node(dev_to_node(dev));
#else
mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
#endif
};
EXPORT_SYMBOL_GPL(pci_power_names);
-unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
+unsigned int pci_pm_d3_delay;
+
+static void pci_dev_d3_sleep(struct pci_dev *dev)
+{
+ unsigned int delay = dev->d3_delay;
+
+ if (delay < pci_pm_d3_delay)
+ delay = pci_pm_d3_delay;
+
+ msleep(delay);
+}
#ifdef CONFIG_PCI_DOMAINS
int pci_domains_supported = 1;
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
- msleep(pci_pm_d3_delay);
+ pci_dev_d3_sleep(dev);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(PCI_PM_D2_DELAY);
/**
* pcibios_set_pcie_reset_state - set reset state for device dev
- * @dev: the PCI-E device reset
+ * @dev: the PCIe device reset
* @state: Reset state to enter into
*
*
- * Sets the PCI-E reset state for the device. This is the default
+ * Sets the PCIe reset state for the device. This is the default
* implementation. Architecture implementations can override this.
*/
int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
/**
* pci_set_pcie_reset_state - set reset state for device dev
- * @dev: the PCI-E device reset
+ * @dev: the PCIe device reset
* @state: Reset state to enter into
*
*
}
dev->pm_cap = pm;
+ dev->d3_delay = PCI_PM_D3_WAIT;
dev->d1_support = false;
dev->d2_support = false;
csr &= ~PCI_PM_CTRL_STATE_MASK;
csr |= PCI_D3hot;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
- msleep(pci_pm_d3_delay);
+ pci_dev_d3_sleep(dev);
csr &= ~PCI_PM_CTRL_STATE_MASK;
csr |= PCI_D0;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
- msleep(pci_pm_d3_delay);
+ pci_dev_d3_sleep(dev);
return 0;
}
down(&dev->dev.sem);
}
+ rc = pci_dev_specific_reset(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
rc = pcie_flr(dev, probe);
if (rc != -ENOTTY)
goto done;
return 1;
}
+void __weak pci_fixup_cardbus(struct pci_bus *bus)
+{
+}
+EXPORT_SYMBOL(pci_fixup_cardbus);
+
static int __init pci_setup(char *str)
{
while (str) {
extern void pci_enable_acs(struct pci_dev *dev);
+struct pci_dev_reset_methods {
+ u16 vendor;
+ u16 device;
+ int (*reset)(struct pci_dev *dev, int probe);
+};
+
+extern int pci_dev_specific_reset(struct pci_dev *dev, int probe);
+
#endif /* DRIVERS_PCI_H */
#
config PCIEAER_INJECT
- tristate "PCIE AER error injector support"
+ tristate "PCIe AER error injector support"
depends on PCIEAER
default n
help
This enables PCI Express Root Port Advanced Error Reporting
(AER) software error injector.
- Debuging PCIE AER code is quite difficult because it is hard
+ Debugging PCIe AER code is quite difficult because it is hard
to trigger various real hardware errors. Software based
error injection can fake almost all kinds of errors with the
help of a user space helper tool aer-inject, which can be
/*
- * PCIE AER software error injection support.
+ * PCIe AER software error injection support.
*
- * Debuging PCIE AER code is quite difficult because it is hard to
+ * Debuging PCIe AER code is quite difficult because it is hard to
* trigger various real hardware errors. Software based error
* injection can fake almost all kinds of errors with the help of a
* user space helper tool aer-inject, which can be gotten from:
unsigned long flags;
unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
int pos_cap_err, rp_pos_cap_err;
- u32 sever;
+ u32 sever, cor_mask, uncor_mask;
int ret = 0;
dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
goto out_put;
}
pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask);
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+ &uncor_mask);
rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
if (!rp_pos_cap_err) {
err->header_log2 = einj->header_log2;
err->header_log3 = einj->header_log3;
+ if (einj->cor_status && !(einj->cor_status & ~cor_mask)) {
+ ret = -EINVAL;
+ printk(KERN_WARNING "The correctable error(s) is masked "
+ "by device\n");
+ spin_unlock_irqrestore(&inject_lock, flags);
+ goto out_put;
+ }
+ if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) {
+ ret = -EINVAL;
+ printk(KERN_WARNING "The uncorrectable error(s) is masked "
+ "by device\n");
+ spin_unlock_irqrestore(&inject_lock, flags);
+ goto out_put;
+ }
+
rperr = __find_aer_error_by_dev(rpdev);
if (!rperr) {
rperr = rperr_alloc;
if (ret)
goto out_put;
- if (find_aer_device(rpdev, &edev))
+ if (find_aer_device(rpdev, &edev)) {
+ if (!get_service_data(edev)) {
+ printk(KERN_WARNING "AER service is not initialized\n");
+ ret = -EINVAL;
+ goto out_put;
+ }
aer_irq(-1, edev);
+ }
else
ret = -EINVAL;
out_put:
module_init(aer_inject_init);
module_exit(aer_inject_exit);
-MODULE_DESCRIPTION("PCIE AER software error injector");
+MODULE_DESCRIPTION("PCIe AER software error injector");
MODULE_LICENSE("GPL");
mutex_init(&rpc->rpc_mutex);
init_waitqueue_head(&rpc->wait_release);
- /* Use PCIE bus function to store rpc into PCIE device */
+ /* Use PCIe bus function to store rpc into PCIe device */
set_service_data(dev, rpc);
return rpc;
*
* @return: Zero on success. Nonzero otherwise.
*
- * Invoked when PCIE bus loads AER service driver. To avoid conflict with
+ * Invoked when PCIe bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
int aer_osc_setup(struct pcie_device *pciedev)
* aer_enable_rootport - enable Root Port's interrupts when receiving messages
* @rpc: pointer to a Root Port data structure
*
- * Invoked when PCIE bus loads AER service driver.
+ * Invoked when PCIe bus loads AER service driver.
*/
void aer_enable_rootport(struct aer_rpc *rpc)
{
u32 reg32;
pos = pci_pcie_cap(pdev);
- /* Clear PCIE Capability's Device Status */
+ /* Clear PCIe Capability's Device Status */
pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16);
pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
* disable_root_aer - disable Root Port's interrupts when receiving messages
* @rpc: pointer to a Root Port data structure
*
- * Invoked when PCIE bus unloads AER service driver.
+ * Invoked when PCIe bus unloads AER service driver.
*/
static void disable_root_aer(struct aer_rpc *rpc)
{
if (info->status == 0) {
AER_PR(info, dev,
- "PCIE Bus Error: severity=%s, type=Unaccessible, "
+ "PCIe Bus Error: severity=%s, type=Unaccessible, "
"id=%04x(Unregistered Agent ID)\n",
aer_error_severity_string[info->severity], id);
} else {
agent = AER_GET_AGENT(info->severity, info->status);
AER_PR(info, dev,
- "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
+ "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
aer_error_severity_string[info->severity],
aer_error_layer[layer], id, aer_agent_string[agent]);
/*
* File: drivers/pci/pcie/aspm.c
- * Enabling PCIE link L0s/L1 state and Clock Power Management
+ * Enabling PCIe link L0s/L1 state and Clock Power Management
*
* Copyright (C) 2007 Intel
* Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
int pos;
u32 reg32;
/*
- * Some functions in a slot might not all be PCIE functions,
+ * Some functions in a slot might not all be PCIe functions,
* very strange. Disable ASPM for the whole slot
*/
list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
*/
static void release_pcie_device(struct device *dev)
{
- kfree(to_pcie_device(dev));
+ kfree(to_pcie_device(dev));
}
/**
{
struct pcie_port_service_driver *service_driver;
- if ((dev->bus == &pcie_port_bus_type) &&
- (dev->driver)) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->suspend)
- service_driver->suspend(to_pcie_device(dev));
- }
+ if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
+ service_driver = to_service_driver(dev->driver);
+ if (service_driver->suspend)
+ service_driver->suspend(to_pcie_device(dev));
+ }
return 0;
}
return driver_register(&new->driver);
}
+EXPORT_SYMBOL(pcie_port_service_register);
/**
* pcie_port_service_unregister - unregister PCI Express port service driver
{
driver_unregister(&drv->driver);
}
-
-EXPORT_SYMBOL(pcie_port_service_register);
EXPORT_SYMBOL(pcie_port_service_unregister);
*/
#define DRIVER_VERSION "v1.0"
#define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
-#define DRIVER_DESC "PCIE Port Bus Driver"
+#define DRIVER_DESC "PCIe Port Bus Driver"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
- * If detected invokes the pcie_port_device_register() method for
+ * If detected invokes the pcie_port_device_register() method for
* this port device.
*
*/
(dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)))
return -ENODEV;
- if (!dev->irq && dev->pin) {
+ if (!dev->irq && dev->pin) {
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
"check vendor BIOS\n", dev->vendor, dev->device);
}
return 0;
}
-static void pcie_portdrv_remove (struct pci_dev *dev)
+static void pcie_portdrv_remove(struct pci_dev *dev)
{
pcie_port_device_remove(dev);
pci_disable_device(dev);
static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
enum pci_channel_state error)
{
- struct aer_broadcast_data result_data =
- {error, PCI_ERS_RESULT_CAN_RECOVER};
- int retval;
+ struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER};
+ int ret;
/* can not fail */
- retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter);
+ ret = device_for_each_child(&dev->dev, &data, error_detected_iter);
- return result_data.result;
+ return data.result;
}
static int mmio_enabled_iter(struct device *device, void *data)
return retval;
}
-static void __exit pcie_portdrv_exit(void)
+static void __exit pcie_portdrv_exit(void)
{
pci_unregister_driver(&pcie_portdriver);
pcie_port_bus_unregister();
if (!pci_cache_line_size) {
printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
cls << 2, pci_dfl_cache_line_size << 2);
- pci_cache_line_size = cls;
+ pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
}
return 0;
}
fs_initcall_sync(pci_apply_final_quirks);
+
+/*
+ * Followings are device-specific reset methods which can be used to
+ * reset a single function if other methods (e.g. FLR, PM D0->D3) are
+ * not available.
+ */
+static int reset_intel_generic_dev(struct pci_dev *dev, int probe)
+{
+ int pos;
+
+ /* only implement PCI_CLASS_SERIAL_USB at present */
+ if (dev->class == PCI_CLASS_SERIAL_USB) {
+ pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
+ if (!pos)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_write_config_byte(dev, pos + 0x4, 1);
+ msleep(100);
+
+ return 0;
+ } else {
+ return -ENOTTY;
+ }
+}
+
+static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
+{
+ int pos;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_BCR_FLR);
+ msleep(100);
+
+ return 0;
+}
+
+#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
+
+static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
+ reset_intel_82599_sfp_virtfn },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ reset_intel_generic_dev },
+ { 0 }
+};
+
+int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+ const struct pci_dev_reset_methods *i;
+
+ for (i = pci_dev_reset_methods; i->reset; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID))
+ return i->reset(dev, probe);
+ }
+
+ return -ENOTTY;
+}
+
#else
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
+int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; }
#endif
EXPORT_SYMBOL(pci_fixup_device);
DECLARE_RWSEM(pci_bus_sem);
/*
- * find the upstream PCIE-to-PCI bridge of a PCI device
+ * find the upstream PCIe-to-PCI bridge of a PCI device
* if the device is PCIE, return NULL
- * if the device isn't connected to a PCIE bridge (that is its parent is a
+ * if the device isn't connected to a PCIe bridge (that is its parent is a
* legacy PCI bridge and the bridge is directly connected to bus 0), return its
* parent
*/
tmp = pdev;
continue;
}
- /* PCI device should connect to a PCIE bridge */
+ /* PCI device should connect to a PCIe bridge */
if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) {
/* Busted hardware? */
WARN_ON_ONCE(1);
unsigned int max, pass;
s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0));
-/* pcibios_fixup_bus(bus); */
+ pci_fixup_cardbus(bus);
max = bus->secondary;
for (pass = 0; pass < 2; pass++)
This driver was formerly known as ibm-acpi.
+ Extra functionality will be available if the rfkill (CONFIG_RFKILL)
+ and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
+ Note that if you want ThinkPad-ACPI to be built-in instead of
+ modular, ALSA and rfkill will also have to be built-in.
+
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+config THINKPAD_ACPI_ALSA_SUPPORT
+ bool "Console audio control ALSA interface"
+ depends on THINKPAD_ACPI
+ depends on SND
+ depends on SND = y || THINKPAD_ACPI = SND
+ default y
+ ---help---
+ Enables monitoring of the built-in console audio output control
+ (headphone and speakers), which is operated by the mute and (in
+ some ThinkPad models) volume hotkeys.
+
+ If this option is enabled, ThinkPad-ACPI will export an ALSA card
+ with a single read-only mixer control, which should be used for
+ on-screen-display feedback purposes by the Desktop Environment.
+
+ Optionally, the driver will also allow software control (the
+ ALSA mixer will be made read-write). Please refer to the driver
+ documentation for details.
+
+ All IBM models have both volume and mute control. Newer Lenovo
+ models only have mute control (the volume hotkeys are just normal
+ keys and volume control is done through the main HDA mixer).
+
config THINKPAD_ACPI_DEBUGFACILITIES
bool "Maintainer debug facilities"
depends on THINKPAD_ACPI
select HWMON
select LEDS_CLASS
select NEW_LEDS
+ select INPUT_SPARSEKMAP
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
static struct key_entry *key;
union acpi_object *obj;
+ acpi_status status;
- wmi_get_event_data(value, &response);
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status);
+ return;
+ }
obj = (union acpi_object *)response.pointer;
static int __init dell_wmi_init(void)
{
int err;
+ acpi_status status;
- if (wmi_has_guid(DELL_EVENT_GUID)) {
+ if (!wmi_has_guid(DELL_EVENT_GUID)) {
printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n");
return -ENODEV;
}
if (err)
return err;
- err = wmi_install_notify_handler(DELL_EVENT_GUID,
+ status = wmi_install_notify_handler(DELL_EVENT_GUID,
dell_wmi_notify, NULL);
- if (err) {
+ if (ACPI_FAILURE(status)) {
input_unregister_device(dell_wmi_input_dev);
printk(KERN_ERR
"dell-wmi: Unable to register notify handler - %d\n",
- err);
- return err;
+ status);
+ return -ENODEV;
}
return 0;
#include <acpi/acpi_bus.h>
#include <linux/uaccess.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/rfkill.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/leds.h>
+#include <linux/dmi.h>
#define EEEPC_LAPTOP_VERSION "0.1"
#define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver"
MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME);
MODULE_LICENSE("GPL");
+static bool hotplug_disabled;
+
+module_param(hotplug_disabled, bool, 0644);
+MODULE_PARM_DESC(hotplug_disabled,
+ "Disable hotplug for wireless device. "
+ "If your laptop need that, please report to "
+ "acpi4asus-user@lists.sourceforge.net.");
+
/*
* Definitions for Asus EeePC
*/
NULL, NULL, "PBPS", "TPDS"
};
-struct key_entry {
- char type;
- u8 code;
- u16 keycode;
-};
-
-enum { KE_KEY, KE_END };
-
static const struct key_entry eeepc_keymap[] = {
- /* Sleep already handled via generic ACPI code */
- {KE_KEY, 0x10, KEY_WLAN },
- {KE_KEY, 0x11, KEY_WLAN },
- {KE_KEY, 0x12, KEY_PROG1 },
- {KE_KEY, 0x13, KEY_MUTE },
- {KE_KEY, 0x14, KEY_VOLUMEDOWN },
- {KE_KEY, 0x15, KEY_VOLUMEUP },
- {KE_KEY, 0x16, KEY_DISPLAY_OFF },
- {KE_KEY, 0x1a, KEY_COFFEE },
- {KE_KEY, 0x1b, KEY_ZOOM },
- {KE_KEY, 0x1c, KEY_PROG2 },
- {KE_KEY, 0x1d, KEY_PROG3 },
- {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN },
- {KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP },
- {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
- {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
- {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
- {KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */
- {KE_KEY, 0x38, KEY_F14 },
- {KE_END, 0},
+ { KE_KEY, 0x10, { KEY_WLAN } },
+ { KE_KEY, 0x11, { KEY_WLAN } },
+ { KE_KEY, 0x12, { KEY_PROG1 } },
+ { KE_KEY, 0x13, { KEY_MUTE } },
+ { KE_KEY, 0x14, { KEY_VOLUMEDOWN } },
+ { KE_KEY, 0x15, { KEY_VOLUMEUP } },
+ { KE_KEY, 0x16, { KEY_DISPLAY_OFF } },
+ { KE_KEY, 0x1a, { KEY_COFFEE } },
+ { KE_KEY, 0x1b, { KEY_ZOOM } },
+ { KE_KEY, 0x1c, { KEY_PROG2 } },
+ { KE_KEY, 0x1d, { KEY_PROG3 } },
+ { KE_KEY, NOTIFY_BRN_MIN, { KEY_BRIGHTNESSDOWN } },
+ { KE_KEY, NOTIFY_BRN_MAX, { KEY_BRIGHTNESSUP } },
+ { KE_KEY, 0x30, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x31, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x32, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x37, { KEY_F13 } }, /* Disable Touchpad */
+ { KE_KEY, 0x38, { KEY_F14 } },
+ { KE_END, 0 },
};
-
/*
* This is the main structure, we can use it to store useful information
*/
acpi_handle handle; /* the handle of the acpi device */
u32 cm_supported; /* the control methods supported
by this BIOS */
+ bool cpufv_disabled;
+ bool hotplug_disabled;
u16 event_count[128]; /* count for each event */
struct platform_device *platform_device;
struct eeepc_cpufv c;
int rv, value;
+ if (eeepc->cpufv_disabled)
+ return -EPERM;
if (get_cpufv(eeepc, &c))
return -ENODEV;
rv = parse_arg(buf, count, &value);
return rv;
}
+static ssize_t show_cpufv_disabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_laptop *eeepc = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", eeepc->cpufv_disabled);
+}
+
+static ssize_t store_cpufv_disabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeepc_laptop *eeepc = dev_get_drvdata(dev);
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv < 0)
+ return rv;
+
+ switch (value) {
+ case 0:
+ if (eeepc->cpufv_disabled)
+ pr_warning("cpufv enabled (not officially supported "
+ "on this model)\n");
+ eeepc->cpufv_disabled = false;
+ return rv;
+ case 1:
+ return -EPERM;
+ default:
+ return -EINVAL;
+ }
+}
+
+
static struct device_attribute dev_attr_cpufv = {
.attr = {
.name = "cpufv",
.show = show_available_cpufv
};
+static struct device_attribute dev_attr_cpufv_disabled = {
+ .attr = {
+ .name = "cpufv_disabled",
+ .mode = 0644 },
+ .show = show_cpufv_disabled,
+ .store = store_cpufv_disabled
+};
+
+
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
&dev_attr_cpufv.attr,
&dev_attr_available_cpufv.attr,
+ &dev_attr_cpufv_disabled.attr,
NULL
};
if (result && result != -ENODEV)
goto exit;
+ if (eeepc->hotplug_disabled)
+ return 0;
+
result = eeepc_setup_pci_hotplug(eeepc);
/*
* If we get -EBUSY then something else is handling the PCI hotplug -
/*
* Input device (i.e. hotkeys)
*/
-static struct key_entry *eeepc_get_entry_by_scancode(
- struct eeepc_laptop *eeepc,
- int code)
+static int eeepc_input_init(struct eeepc_laptop *eeepc)
{
- struct key_entry *key;
+ struct input_dev *input;
+ int error;
- for (key = eeepc->keymap; key->type != KE_END; key++)
- if (code == key->code)
- return key;
-
- return NULL;
-}
-
-static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event)
-{
- static struct key_entry *key;
-
- key = eeepc_get_entry_by_scancode(eeepc, event);
- if (key) {
- switch (key->type) {
- case KE_KEY:
- input_report_key(eeepc->inputdev, key->keycode,
- 1);
- input_sync(eeepc->inputdev);
- input_report_key(eeepc->inputdev, key->keycode,
- 0);
- input_sync(eeepc->inputdev);
- break;
- }
+ input = input_allocate_device();
+ if (!input) {
+ pr_info("Unable to allocate input device\n");
+ return -ENOMEM;
}
-}
-
-static struct key_entry *eeepc_get_entry_by_keycode(
- struct eeepc_laptop *eeepc, int code)
-{
- struct key_entry *key;
-
- for (key = eeepc->keymap; key->type != KE_END; key++)
- if (code == key->keycode && key->type == KE_KEY)
- return key;
- return NULL;
-}
+ input->name = "Asus EeePC extra buttons";
+ input->phys = EEEPC_LAPTOP_FILE "/input0";
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = &eeepc->platform_device->dev;
-static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
-{
- struct eeepc_laptop *eeepc = input_get_drvdata(dev);
- struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode);
-
- if (key && key->type == KE_KEY) {
- *keycode = key->keycode;
- return 0;
+ error = sparse_keymap_setup(input, eeepc_keymap, NULL);
+ if (error) {
+ pr_err("Unable to setup input device keymap\n");
+ goto err_free_dev;
}
- return -EINVAL;
-}
-
-static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
- struct eeepc_laptop *eeepc = input_get_drvdata(dev);
- struct key_entry *key;
- int old_keycode;
-
- if (keycode < 0 || keycode > KEY_MAX)
- return -EINVAL;
-
- key = eeepc_get_entry_by_scancode(eeepc, scancode);
- if (key && key->type == KE_KEY) {
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!eeepc_get_entry_by_keycode(eeepc, old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
+ error = input_register_device(input);
+ if (error) {
+ pr_err("Unable to register input device\n");
+ goto err_free_keymap;
}
- return -EINVAL;
-}
-
-static int eeepc_input_init(struct eeepc_laptop *eeepc)
-{
- const struct key_entry *key;
- int result;
-
- eeepc->inputdev = input_allocate_device();
- if (!eeepc->inputdev) {
- pr_info("Unable to allocate input device\n");
- return -ENOMEM;
- }
- eeepc->inputdev->name = "Asus EeePC extra buttons";
- eeepc->inputdev->dev.parent = &eeepc->platform_device->dev;
- eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0";
- eeepc->inputdev->id.bustype = BUS_HOST;
- eeepc->inputdev->getkeycode = eeepc_getkeycode;
- eeepc->inputdev->setkeycode = eeepc_setkeycode;
- input_set_drvdata(eeepc->inputdev, eeepc);
-
- eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap),
- GFP_KERNEL);
- for (key = eeepc_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_KEY:
- set_bit(EV_KEY, eeepc->inputdev->evbit);
- set_bit(key->keycode, eeepc->inputdev->keybit);
- break;
- }
- }
- result = input_register_device(eeepc->inputdev);
- if (result) {
- pr_info("Unable to register input device\n");
- input_free_device(eeepc->inputdev);
- return result;
- }
+ eeepc->inputdev = input;
return 0;
+
+ err_free_keymap:
+ sparse_keymap_free(input);
+ err_free_dev:
+ input_free_device(input);
+ return error;
}
static void eeepc_input_exit(struct eeepc_laptop *eeepc)
* event will be desired value (or else ignored)
*/
}
- eeepc_input_notify(eeepc, event);
+ sparse_keymap_report_event(eeepc->inputdev, event,
+ 1, true);
}
} else {
/* Everything else is a bona-fide keypress event */
- eeepc_input_notify(eeepc, event);
+ sparse_keymap_report_event(eeepc->inputdev, event, 1, true);
+ }
+}
+
+static void eeepc_dmi_check(struct eeepc_laptop *eeepc)
+{
+ const char *model;
+
+ model = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (!model)
+ return;
+
+ /*
+ * Blacklist for setting cpufv (cpu speed).
+ *
+ * EeePC 4G ("701") implements CFVS, but it is not supported
+ * by the pre-installed OS, and the original option to change it
+ * in the BIOS setup screen was removed in later versions.
+ *
+ * Judging by the lack of "Super Hybrid Engine" on Asus product pages,
+ * this applies to all "701" models (4G/4G Surf/2G Surf).
+ *
+ * So Asus made a deliberate decision not to support it on this model.
+ * We have several reports that using it can cause the system to hang
+ *
+ * The hang has also been reported on a "702" (Model name "8G"?).
+ *
+ * We avoid dmi_check_system() / dmi_match(), because they use
+ * substring matching. We don't want to affect the "701SD"
+ * and "701SDX" models, because they do support S.H.E.
+ */
+ if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) {
+ eeepc->cpufv_disabled = true;
+ pr_info("model %s does not officially support setting cpu "
+ "speed\n", model);
+ pr_info("cpufv disabled to avoid instability\n");
+ }
+
+ /*
+ * Blacklist for wlan hotplug
+ *
+ * Eeepc 1005HA doesn't work like others models and don't need the
+ * hotplug code. In fact, current hotplug code seems to unplug another
+ * device...
+ */
+ if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) {
+ eeepc->hotplug_disabled = true;
+ pr_info("wlan hotplug disabled\n");
}
}
strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS);
device->driver_data = eeepc;
+ eeepc->hotplug_disabled = hotplug_disabled;
+
+ eeepc_dmi_check(eeepc);
+
result = eeepc_acpi_init(eeepc, device);
if (result)
goto fail_platform;
result = acpi_bus_register_driver(&eeepc_acpi_driver);
if (result < 0)
goto fail_acpi_driver;
+
if (!eeepc_device_present) {
result = -ENODEV;
goto fail_no_device;
}
+
return 0;
fail_no_device:
static struct key_entry *key;
union acpi_object *obj;
int eventcode;
+ acpi_status status;
- wmi_get_event_data(value, &response);
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status);
+ return;
+ }
obj = (union acpi_object *)response.pointer;
} else
printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
eventcode);
-
- kfree(obj);
}
static int __init hp_wmi_input_setup(void)
if (wmi_has_guid(HPWMI_EVENT_GUID)) {
err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
hp_wmi_notify, NULL);
- if (!err)
+ if (ACPI_SUCCESS(err))
hp_wmi_input_setup();
}
static struct key_entry *key;
union acpi_object *obj;
ktime_t cur;
+ acpi_status status;
- wmi_get_event_data(value, &response);
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status);
+ return;
+ }
obj = (union acpi_object *)response.pointer;
}
err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
msi_wmi_notify, NULL);
- if (err)
+ if (ACPI_FAILURE(err))
return -EINVAL;
err = msi_wmi_input_setup();
/* the buffer is filled with magic numbers describing the devices
* available, 0xff terminates the enumeration
*/
- while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff &&
- i < device_enum->buffer.length) {
- i++;
+ for (i = 0; i < device_enum->buffer.length; i++) {
+
+ dev_code = *(device_enum->buffer.pointer + i);
+ if (dev_code == 0xff)
+ break;
+
dprintk("Radio devices, looking at 0x%.2x\n", dev_code);
if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI])
* and we leave them unchanged.
*/
+#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
+
#define TPACPI_ALSA_DRVNAME "ThinkPad EC"
#define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control"
#define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME
-static int alsa_index = SNDRV_DEFAULT_IDX1;
+static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */
static char *alsa_id = "ThinkPadEC";
static int alsa_enable = SNDRV_DEFAULT_ENABLE1;
rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE,
sizeof(struct tpacpi_alsa_data), &card);
- if (rc < 0)
- return rc;
- if (!card)
- return -ENOMEM;
+ if (rc < 0 || !card) {
+ printk(TPACPI_ERR
+ "Failed to create ALSA card structures: %d\n", rc);
+ return 1;
+ }
BUG_ON(!card->private_data);
data = card->private_data;
rc = snd_ctl_add(card, ctl_vol);
if (rc < 0) {
printk(TPACPI_ERR
- "Failed to create ALSA volume control\n");
- goto err_out;
+ "Failed to create ALSA volume control: %d\n",
+ rc);
+ goto err_exit;
}
data->ctl_vol_id = &ctl_vol->id;
}
ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL);
rc = snd_ctl_add(card, ctl_mute);
if (rc < 0) {
- printk(TPACPI_ERR "Failed to create ALSA mute control\n");
- goto err_out;
+ printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n",
+ rc);
+ goto err_exit;
}
data->ctl_mute_id = &ctl_mute->id;
snd_card_set_dev(card, &tpacpi_pdev->dev);
rc = snd_card_register(card);
-
-err_out:
if (rc < 0) {
- snd_card_free(card);
- card = NULL;
+ printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc);
+ goto err_exit;
}
alsa_card = card;
- return rc;
+ return 0;
+
+err_exit:
+ snd_card_free(card);
+ return 1;
}
#define TPACPI_VOL_Q_MUTEONLY 0x0001 /* Mute-only control available */
.shutdown = volume_shutdown,
};
+#else /* !CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
+
+#define alsa_card NULL
+
+static void inline volume_alsa_notify_change(void)
+{
+}
+
+static int __init volume_init(struct ibm_init_struct *iibm)
+{
+ printk(TPACPI_INFO
+ "volume: disabled as there is no ALSA support in this kernel\n");
+
+ return 1;
+}
+
+static struct ibm_struct volume_driver_data = {
+ .name = "volume",
+};
+
+#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
+
/*************************************************************************
* Fan subdriver
*/
"used for backwards compatibility with userspace, "
"see documentation");
+#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
module_param_named(volume_mode, volume_mode, uint, 0444);
MODULE_PARM_DESC(volume_mode,
"Selects volume control strategy: "
MODULE_PARM_DESC(id, "ALSA id for the ACPI EC Mixer");
module_param_named(enable, alsa_enable, bool, 0444);
MODULE_PARM_DESC(enable, "Enable the ALSA interface for the ACPI EC Mixer");
+#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
#define TPACPI_PARAM(feature) \
module_param_call(feature, set_ibm_param, NULL, NULL, 0); \
if (!guid || !handler)
return AE_BAD_PARAMETER;
- find_guid(guid, &block);
- if (!block)
+ if (!find_guid(guid, &block))
return AE_NOT_EXIST;
if (block->handler)
if (!guid)
return AE_BAD_PARAMETER;
- find_guid(guid, &block);
- if (!block)
+ if (!find_guid(guid, &block))
return AE_NOT_EXIST;
if (!block->handler)
return ret;
}
+static bool guid_already_parsed(const char *guid_string)
+{
+ struct guid_block *gblock;
+ struct wmi_block *wblock;
+ struct list_head *p;
+
+ list_for_each(p, &wmi_blocks.list) {
+ wblock = list_entry(p, struct wmi_block, list);
+ gblock = &wblock->gblock;
+
+ if (strncmp(gblock->guid, guid_string, 16) == 0)
+ return true;
+ }
+ return false;
+}
+
/*
* Parse the _WDG method for the GUID data blocks
*/
union acpi_object *obj;
struct guid_block *gblock;
struct wmi_block *wblock;
+ char guid_string[37];
acpi_status status;
u32 i, total;
memcpy(gblock, obj->buffer.pointer, obj->buffer.length);
for (i = 0; i < total; i++) {
+ /*
+ Some WMI devices, like those for nVidia hooks, have a
+ duplicate GUID. It's not clear what we should do in this
+ case yet, so for now, we'll just ignore the duplicate.
+ Anyone who wants to add support for that device can come
+ up with a better workaround for the mess then.
+ */
+ if (guid_already_parsed(gblock[i].guid) == true) {
+ wmi_gtoa(gblock[i].guid, guid_string);
+ printk(KERN_INFO PREFIX "Skipping duplicate GUID %s\n",
+ guid_string);
+ continue;
+ }
wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL);
if (!wblock)
return AE_NO_MEMORY;
case POWER_SUPPLY_PROP_STATUS:
if (pbi->flags & PMU_BATT_CHARGING)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (pmu_power_flags & PMU_PWR_AC_PRESENT)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
#define cmos_pnp_resume NULL
#endif
-static void cmos_pnp_shutdown(struct device *pdev)
+static void cmos_pnp_shutdown(struct pnp_dev *pnp)
{
- if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+ if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pnp->dev))
return;
cmos_do_shutdown();
.id_table = rtc_ids,
.probe = cmos_pnp_probe,
.remove = __exit_p(cmos_pnp_remove),
+ .shutdown = cmos_pnp_shutdown,
/* flag ensures resume() gets called, and stops syslog spam */
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
.suspend = cmos_pnp_suspend,
.resume = cmos_pnp_resume,
- .driver = {
- .name = (char *)driver_name,
- .shutdown = cmos_pnp_shutdown,
- }
};
#endif /* CONFIG_PNP */
if (device == NULL ||
device != dasd_device_from_cdev_locked(cdev) ||
strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) {
- DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: "
- "bus_id %s", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s",
+ "invalid device in request");
return;
}
device = (struct dasd_device *) cqr->startdev;
if (!device ||
strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) {
- DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: "
- "bus_id %s", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s",
+ "invalid device in request");
return;
}
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
+#include <asm/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
rc = -EFAULT;
if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
goto out;
-#ifndef CONFIG_64BIT
- /* Make sure pointers are sane even on 31 bit. */
- if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) {
+ if (is_compat_task() || sizeof(long) == 4) {
+ /* Make sure pointers are sane even on 31 bit. */
rc = -EINVAL;
- goto out;
+ if ((usrparm.psf_data >> 32) != 0)
+ goto out;
+ if ((usrparm.rssd_result >> 32) != 0)
+ goto out;
+ usrparm.psf_data &= 0x7fffffffULL;
+ usrparm.rssd_result &= 0x7fffffffULL;
}
-#endif
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n",
req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
- scsw_cc(&irb->scsw), req->intrc);
+ scsw_cc(&irb->scsw), req ? req->intrc : 0);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" device %s: Failing CCW: %p\n",
dev_name(&device->cdev->dev),
#include <linux/fs.h>
#include <linux/blkpg.h>
#include <linux/smp_lock.h>
-
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
#include <asm/uaccess.h>
struct ccw_dev_id dev_id;
base = block->base;
- if (!base->discipline->fill_info)
+ if (!base->discipline || !base->discipline->fill_info)
return -EINVAL;
dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL);
dasd_info->features |=
((base->features & DASD_FEATURE_READONLY) != 0);
- if (base->discipline)
- memcpy(dasd_info->type, base->discipline->name, 4);
- else
- memcpy(dasd_info->type, "none", 4);
+ memcpy(dasd_info->type, base->discipline->name, 4);
if (block->request_queue->request_fn) {
struct list_head *l;
}
static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
- unsigned long arg)
+ struct cmbdata __user *argp)
{
- struct cmbdata __user *argp = (void __user *) arg;
size_t size = _IOC_SIZE(cmd);
struct cmbdata data;
int ret;
unsigned int cmd, unsigned long arg)
{
struct dasd_block *block = bdev->bd_disk->private_data;
- void __user *argp = (void __user *)arg;
+ void __user *argp;
+
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (void __user *)arg;
if (!block)
return -ENODEV;
case BIODASDCMFDISABLE:
return disable_cmf(block->base->cdev);
case BIODASDREADALLCMB:
- return dasd_ioctl_readall_cmb(block, cmd, arg);
+ return dasd_ioctl_readall_cmb(block, cmd, argp);
default:
/* if the discipline has an ioctl method try it. */
if (block->base->discipline->ioctl) {
/* Print device number. */
seq_printf(m, "%s", dev_name(&device->cdev->dev));
/* Print discipline string. */
- if (device != NULL && device->discipline != NULL)
+ if (device->discipline != NULL)
seq_printf(m, "(%s)", device->discipline->name);
else
seq_printf(m, "(none)");
substr = (device->features & DASD_FEATURE_READONLY) ? "(ro)" : " ";
seq_printf(m, "%4s: ", substr);
/* Print device status information. */
- switch ((device != NULL) ? device->state : -1) {
- case -1:
- seq_printf(m, "unknown");
- break;
+ switch (device->state) {
case DASD_STATE_NEW:
seq_printf(m, "new");
break;
tty_wakeup(tty);
}
-/*
- * Currently we don't have any io controls for 3215 ttys
- */
-static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- switch (cmd) {
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
/*
* Disable reading from a 3215 tty
*/
.write_room = tty3215_write_room,
.chars_in_buffer = tty3215_chars_in_buffer,
.flush_buffer = tty3215_flush_buffer,
- .ioctl = tty3215_ioctl,
.throttle = tty3215_throttle,
.unthrottle = tty3215_unthrottle,
.stop = tty3215_stop,
#include <linux/types.h>
#include <linux/smp_lock.h>
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
#include <asm/ebcdic.h>
static long
fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
+ char __user *argp;
struct fs3270 *fp;
struct raw3270_iocb iocb;
int rc;
fp = filp->private_data;
if (!fp)
return -ENODEV;
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (char __user *)arg;
rc = 0;
mutex_lock(&fs3270_mutex);
switch (cmd) {
fp->write_command = arg;
break;
case TUBGETI:
- rc = put_user(fp->read_command, (char __user *) arg);
+ rc = put_user(fp->read_command, argp);
break;
case TUBGETO:
- rc = put_user(fp->write_command,(char __user *) arg);
+ rc = put_user(fp->write_command, argp);
break;
case TUBGETMOD:
iocb.model = fp->view.model;
iocb.pf_cnt = 24;
iocb.re_cnt = 20;
iocb.map = 0;
- if (copy_to_user((char __user *) arg, &iocb,
- sizeof(struct raw3270_iocb)))
+ if (copy_to_user(argp, &iocb, sizeof(struct raw3270_iocb)))
rc = -EFAULT;
break;
}
.write = fs3270_write, /* write */
.unlocked_ioctl = fs3270_ioctl, /* ioctl */
.compat_ioctl = fs3270_ioctl, /* ioctl */
- .open = fs3270_open, /* open */
- .release = fs3270_close, /* release */
+ .open = fs3270_open, /* open */
+ .release = fs3270_close, /* release */
};
/*
if (tty->driver_data == NULL)
return -ENOMEM;
tty->low_latency = 0;
+ if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
+ tty->winsize.ws_row = 24;
+ tty->winsize.ws_col = 80;
+ }
}
return 0;
}
*/
static int tapeblock_open(struct block_device *, fmode_t);
static int tapeblock_release(struct gendisk *, fmode_t);
-static int tapeblock_ioctl(struct block_device *, fmode_t, unsigned int,
- unsigned long);
static int tapeblock_medium_changed(struct gendisk *);
static int tapeblock_revalidate_disk(struct gendisk *);
.owner = THIS_MODULE,
.open = tapeblock_open,
.release = tapeblock_release,
- .ioctl = tapeblock_ioctl,
.media_changed = tapeblock_medium_changed,
.revalidate_disk = tapeblock_revalidate_disk,
};
return 0;
}
-/*
- * Support of some generic block device IOCTLs.
- */
-static int
-tapeblock_ioctl(
- struct block_device * bdev,
- fmode_t mode,
- unsigned int command,
- unsigned long arg
-) {
- int rc;
- int minor;
- struct gendisk *disk = bdev->bd_disk;
- struct tape_device *device;
-
- rc = 0;
- BUG_ON(!disk);
- device = disk->private_data;
- BUG_ON(!device);
- minor = MINOR(bdev->bd_dev);
-
- DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
- DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor);
-
- switch (command) {
- /* Refuse some IOCTL calls without complaining (mount). */
- case 0x5310: /* CDROMMULTISESSION */
- rc = -EINVAL;
- break;
- default:
- rc = -EINVAL;
- }
-
- return rc;
-}
-
/*
* Initialize block device frontend.
*/
#include <linux/proc_fs.h>
#include <linux/mtio.h>
#include <linux/smp_lock.h>
+#include <linux/compat.h>
#include <asm/uaccess.h>
static int tapechar_open(struct inode *,struct file *);
static int tapechar_release(struct inode *,struct file *);
static long tapechar_ioctl(struct file *, unsigned int, unsigned long);
-static long tapechar_compat_ioctl(struct file *, unsigned int,
- unsigned long);
+#ifdef CONFIG_COMPAT
+static long tapechar_compat_ioctl(struct file *, unsigned int, unsigned long);
+#endif
static const struct file_operations tape_fops =
{
.read = tapechar_read,
.write = tapechar_write,
.unlocked_ioctl = tapechar_ioctl,
+#ifdef CONFIG_COMPAT
.compat_ioctl = tapechar_compat_ioctl,
+#endif
.open = tapechar_open,
.release = tapechar_release,
};
return rc;
}
+#ifdef CONFIG_COMPAT
static long
tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data)
{
struct tape_device *device = filp->private_data;
int rval = -ENOIOCTLCMD;
+ unsigned long argp;
+ /* The 'arg' argument of any ioctl function may only be used for
+ * pointers because of the compat pointer conversion.
+ * Consider this when adding new ioctls.
+ */
+ argp = (unsigned long) compat_ptr(data);
if (device->discipline->ioctl_fn) {
mutex_lock(&device->mutex);
- rval = device->discipline->ioctl_fn(device, no, data);
+ rval = device->discipline->ioctl_fn(device, no, argp);
mutex_unlock(&device->mutex);
if (rval == -EINVAL)
rval = -ENOIOCTLCMD;
return rval;
}
+#endif /* CONFIG_COMPAT */
/*
* Initialize character device frontend.
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
+#include <asm/compat.h>
#include <asm/cpcmd.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct vmcp_session *session;
+ int __user *argp;
int temp;
session = (struct vmcp_session *)file->private_data;
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (int __user *)arg;
if (mutex_lock_interruptible(&session->mutex))
return -ERESTARTSYS;
switch (cmd) {
case VMCP_GETCODE:
temp = session->resp_code;
mutex_unlock(&session->mutex);
- return put_user(temp, (int __user *)arg);
+ return put_user(temp, argp);
case VMCP_SETBUF:
free_pages((unsigned long)session->response,
get_order(session->bufsize));
session->response=NULL;
- temp = get_user(session->bufsize, (int __user *)arg);
+ temp = get_user(session->bufsize, argp);
if (get_order(session->bufsize) > 8) {
session->bufsize = PAGE_SIZE;
temp = -EINVAL;
case VMCP_GETSIZE:
temp = session->resp_size;
mutex_unlock(&session->mutex);
- return put_user(temp, (int __user *)arg);
+ return put_user(temp, argp);
default:
mutex_unlock(&session->mutex);
return -ENOIOCTLCMD;
obj-$(CONFIG_CHSC_SCH) += chsc_sch.o
obj-$(CONFIG_CCWGROUP) += ccwgroup.o
-qdio-objs := qdio_main.o qdio_thinint.o qdio_debug.o qdio_perf.o qdio_setup.o
+qdio-objs := qdio_main.o qdio_thinint.o qdio_debug.o qdio_setup.o
obj-$(CONFIG_QDIO) += qdio.o
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
+#include <asm/compat.h>
#include <asm/cio.h>
#include <asm/chsc.h>
#include <asm/isc.h>
static long chsc_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
+ void __user *argp;
+
CHSC_MSG(2, "chsc_ioctl called, cmd=%x\n", cmd);
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (void __user *)arg;
switch (cmd) {
case CHSC_START:
- return chsc_ioctl_start((void __user *)arg);
+ return chsc_ioctl_start(argp);
case CHSC_INFO_CHANNEL_PATH:
- return chsc_ioctl_info_channel_path((void __user *)arg);
+ return chsc_ioctl_info_channel_path(argp);
case CHSC_INFO_CU:
- return chsc_ioctl_info_cu((void __user *)arg);
+ return chsc_ioctl_info_cu(argp);
case CHSC_INFO_SCH_CU:
- return chsc_ioctl_info_sch_cu((void __user *)arg);
+ return chsc_ioctl_info_sch_cu(argp);
case CHSC_INFO_CI:
- return chsc_ioctl_conf_info((void __user *)arg);
+ return chsc_ioctl_conf_info(argp);
case CHSC_INFO_CCL:
- return chsc_ioctl_conf_comp_list((void __user *)arg);
+ return chsc_ioctl_conf_comp_list(argp);
case CHSC_INFO_CPD:
- return chsc_ioctl_chpd((void __user *)arg);
+ return chsc_ioctl_chpd(argp);
case CHSC_INFO_DCAL:
- return chsc_ioctl_dcal((void __user *)arg);
+ return chsc_ioctl_dcal(argp);
default: /* unknown ioctl number */
return -ENOIOCTLCMD;
}
u32:32;
} __attribute__ ((packed));
+struct qdio_dev_perf_stat {
+ unsigned int adapter_int;
+ unsigned int qdio_int;
+ unsigned int pci_request_int;
+
+ unsigned int tasklet_inbound;
+ unsigned int tasklet_inbound_resched;
+ unsigned int tasklet_inbound_resched2;
+ unsigned int tasklet_outbound;
+
+ unsigned int siga_read;
+ unsigned int siga_write;
+ unsigned int siga_sync;
+
+ unsigned int inbound_call;
+ unsigned int inbound_handler;
+ unsigned int stop_polling;
+ unsigned int inbound_queue_full;
+ unsigned int outbound_call;
+ unsigned int outbound_handler;
+ unsigned int fast_requeue;
+ unsigned int target_full;
+ unsigned int eqbs;
+ unsigned int eqbs_partial;
+ unsigned int sqbs;
+ unsigned int sqbs_partial;
+};
+
struct qdio_input_q {
/* input buffer acknowledgement flag */
int polling;
u32 *dsci; /* address of device state change indicator */
struct ccw_device *cdev;
struct dentry *debugfs_dev;
+ struct dentry *debugfs_perf;
unsigned long int_parm;
struct subchannel_id schid;
struct ciw aqueue;
struct qdio_ssqd_desc ssqd_desc;
-
void (*orig_handler) (struct ccw_device *, unsigned long, struct irb *);
+ struct qdio_dev_perf_stat perf_stat;
+ int perf_stat_enabled;
/*
* Warning: Leave these members together at the end so they won't be
* cleared in qdio_setup_irq.
(irq->qib.qfmt == QDIO_IQDIO_QFMT || \
css_general_characteristics.aif_osa)
+#define qperf(qdev,attr) qdev->perf_stat.attr
+#define qperf_inc(q,attr) if (q->irq_ptr->perf_stat_enabled) \
+ q->irq_ptr->perf_stat.attr++
+
/* the highest iqdio queue is used for multicast */
static inline int multicast_outbound(struct qdio_q *q)
{
if (!q)
return 0;
- seq_printf(m, "device state indicator: %d\n", *(u32 *)q->irq_ptr->dsci);
- seq_printf(m, "nr_used: %d\n", atomic_read(&q->nr_buf_used));
- seq_printf(m, "ftc: %d\n", q->first_to_check);
- seq_printf(m, "last_move: %d\n", q->last_move);
- seq_printf(m, "polling: %d\n", q->u.in.polling);
- seq_printf(m, "ack start: %d\n", q->u.in.ack_start);
- seq_printf(m, "ack count: %d\n", q->u.in.ack_count);
+ seq_printf(m, "DSCI: %d nr_used: %d\n",
+ *(u32 *)q->irq_ptr->dsci, atomic_read(&q->nr_buf_used));
+ seq_printf(m, "ftc: %d last_move: %d\n", q->first_to_check, q->last_move);
+ seq_printf(m, "polling: %d ack start: %d ack count: %d\n",
+ q->u.in.polling, q->u.in.ack_start, q->u.in.ack_count);
seq_printf(m, "slsb buffer states:\n");
seq_printf(m, "|0 |8 |16 |24 |32 |40 |48 |56 63|\n");
if (!q)
return 0;
-
if (q->is_input_q)
xchg(q->irq_ptr->dsci, 1);
local_bh_disable();
.release = single_release,
};
+static char *qperf_names[] = {
+ "Assumed adapter interrupts",
+ "QDIO interrupts",
+ "Requested PCIs",
+ "Inbound tasklet runs",
+ "Inbound tasklet resched",
+ "Inbound tasklet resched2",
+ "Outbound tasklet runs",
+ "SIGA read",
+ "SIGA write",
+ "SIGA sync",
+ "Inbound calls",
+ "Inbound handler",
+ "Inbound stop_polling",
+ "Inbound queue full",
+ "Outbound calls",
+ "Outbound handler",
+ "Outbound fast_requeue",
+ "Outbound target_full",
+ "QEBSM eqbs",
+ "QEBSM eqbs partial",
+ "QEBSM sqbs",
+ "QEBSM sqbs partial"
+};
+
+static int qperf_show(struct seq_file *m, void *v)
+{
+ struct qdio_irq *irq_ptr = m->private;
+ unsigned int *stat;
+ int i;
+
+ if (!irq_ptr)
+ return 0;
+ if (!irq_ptr->perf_stat_enabled) {
+ seq_printf(m, "disabled\n");
+ return 0;
+ }
+ stat = (unsigned int *)&irq_ptr->perf_stat;
+
+ for (i = 0; i < ARRAY_SIZE(qperf_names); i++)
+ seq_printf(m, "%26s:\t%u\n",
+ qperf_names[i], *(stat + i));
+ return 0;
+}
+
+static ssize_t qperf_seq_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *off)
+{
+ struct seq_file *seq = file->private_data;
+ struct qdio_irq *irq_ptr = seq->private;
+ unsigned long val;
+ char buf[8];
+ int ret;
+
+ if (!irq_ptr)
+ return 0;
+ if (count >= sizeof(buf))
+ return -EINVAL;
+ if (copy_from_user(&buf, ubuf, count))
+ return -EFAULT;
+ buf[count] = 0;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ switch (val) {
+ case 0:
+ irq_ptr->perf_stat_enabled = 0;
+ memset(&irq_ptr->perf_stat, 0, sizeof(irq_ptr->perf_stat));
+ break;
+ case 1:
+ irq_ptr->perf_stat_enabled = 1;
+ break;
+ }
+ return count;
+}
+
+static int qperf_seq_open(struct inode *inode, struct file *filp)
+{
+ return single_open(filp, qperf_show,
+ filp->f_path.dentry->d_inode->i_private);
+}
+
+static struct file_operations debugfs_perf_fops = {
+ .owner = THIS_MODULE,
+ .open = qperf_seq_open,
+ .read = seq_read,
+ .write = qperf_seq_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev)
{
char name[QDIO_DEBUGFS_NAME_LEN];
debugfs_root);
if (IS_ERR(irq_ptr->debugfs_dev))
irq_ptr->debugfs_dev = NULL;
+
+ irq_ptr->debugfs_perf = debugfs_create_file("statistics",
+ S_IFREG | S_IRUGO | S_IWUSR,
+ irq_ptr->debugfs_dev, irq_ptr,
+ &debugfs_perf_fops);
+ if (IS_ERR(irq_ptr->debugfs_perf))
+ irq_ptr->debugfs_perf = NULL;
+
for_each_input_queue(irq_ptr, q, i)
setup_debugfs_entry(q, cdev);
for_each_output_queue(irq_ptr, q, i)
debugfs_remove(q->debugfs_q);
for_each_output_queue(irq_ptr, q, i)
debugfs_remove(q->debugfs_q);
+ debugfs_remove(irq_ptr->debugfs_perf);
debugfs_remove(irq_ptr->debugfs_dev);
}
#include "device.h"
#include "qdio.h"
#include "qdio_debug.h"
-#include "qdio_perf.h"
MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\
"Jan Glauber <jang@linux.vnet.ibm.com>");
int rc;
BUG_ON(!q->irq_ptr->sch_token);
- qdio_perf_stat_inc(&perf_stats.debug_eqbs_all);
+ qperf_inc(q, eqbs);
if (!q->is_input_q)
nr += q->irq_ptr->nr_input_qs;
* buffers later.
*/
if ((ccq == 96) && (count != tmp_count)) {
- qdio_perf_stat_inc(&perf_stats.debug_eqbs_incomplete);
+ qperf_inc(q, eqbs_partial);
return (count - tmp_count);
}
return 0;
BUG_ON(!q->irq_ptr->sch_token);
- qdio_perf_stat_inc(&perf_stats.debug_sqbs_all);
+ qperf_inc(q, sqbs);
if (!q->is_input_q)
nr += q->irq_ptr->nr_input_qs;
rc = qdio_check_ccq(q, ccq);
if (rc == 1) {
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq);
- qdio_perf_stat_inc(&perf_stats.debug_sqbs_incomplete);
+ qperf_inc(q, sqbs_partial);
goto again;
}
if (rc < 0) {
return 0;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr);
- qdio_perf_stat_inc(&perf_stats.siga_sync);
+ qperf_inc(q, siga_sync);
cc = do_siga_sync(q->irq_ptr->schid, output, input);
if (cc)
int cc;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr);
- qdio_perf_stat_inc(&perf_stats.siga_in);
+ qperf_inc(q, siga_read);
cc = do_siga_input(q->irq_ptr->schid, q->mask);
if (cc)
return;
q->u.in.polling = 0;
- qdio_perf_stat_inc(&perf_stats.debug_stop_polling);
+ qperf_inc(q, stop_polling);
/* show the card that we are not polling anymore */
if (is_qebsm(q)) {
/* special handling for no target buffer empty */
if ((!q->is_input_q &&
(q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) {
- qdio_perf_stat_inc(&perf_stats.outbound_target_full);
+ qperf_inc(q, target_full);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x",
q->first_to_check);
return;
inbound_primed(q, count);
q->first_to_check = add_buf(q->first_to_check, count);
if (atomic_sub(count, &q->nr_buf_used) == 0)
- qdio_perf_stat_inc(&perf_stats.inbound_queue_full);
+ qperf_inc(q, inbound_queue_full);
break;
case SLSB_P_INPUT_ERROR:
announce_buffer_error(q, count);
count = sub_buf(end, start);
if (q->is_input_q) {
- qdio_perf_stat_inc(&perf_stats.inbound_handler);
+ qperf_inc(q, inbound_handler);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count);
} else
+ qperf_inc(q, outbound_handler);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x",
start, count);
static void __qdio_inbound_processing(struct qdio_q *q)
{
- qdio_perf_stat_inc(&perf_stats.tasklet_inbound);
+ qperf_inc(q, tasklet_inbound);
again:
if (!qdio_inbound_q_moved(q))
return;
qdio_kick_handler(q);
- if (!qdio_inbound_q_done(q))
+ if (!qdio_inbound_q_done(q)) {
/* means poll time is not yet over */
+ qperf_inc(q, tasklet_inbound_resched);
goto again;
+ }
qdio_stop_polling(q);
/*
* We need to check again to not lose initiative after
* resetting the ACK state.
*/
- if (!qdio_inbound_q_done(q))
+ if (!qdio_inbound_q_done(q)) {
+ qperf_inc(q, tasklet_inbound_resched2);
goto again;
+ }
}
void qdio_inbound_processing(unsigned long data)
return 0;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr);
- qdio_perf_stat_inc(&perf_stats.siga_out);
+ qperf_inc(q, siga_write);
cc = qdio_siga_output(q, &busy_bit);
switch (cc) {
static void __qdio_outbound_processing(struct qdio_q *q)
{
- qdio_perf_stat_inc(&perf_stats.tasklet_outbound);
+ qperf_inc(q, tasklet_outbound);
BUG_ON(atomic_read(&q->nr_buf_used) < 0);
if (qdio_outbound_q_moved(q))
*/
if (qdio_outbound_q_done(q))
del_timer(&q->u.out.timer);
- else {
- if (!timer_pending(&q->u.out.timer)) {
+ else
+ if (!timer_pending(&q->u.out.timer))
mod_timer(&q->u.out.timer, jiffies + 10 * HZ);
- qdio_perf_stat_inc(&perf_stats.debug_tl_out_timer);
- }
- }
return;
sched:
static void __tiqdio_inbound_processing(struct qdio_q *q)
{
- qdio_perf_stat_inc(&perf_stats.thinint_inbound);
+ qperf_inc(q, tasklet_inbound);
qdio_sync_after_thinint(q);
/*
qdio_kick_handler(q);
if (!qdio_inbound_q_done(q)) {
- qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop);
+ qperf_inc(q, tasklet_inbound_resched);
if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) {
tasklet_schedule(&q->tasklet);
return;
* resetting the ACK state.
*/
if (!qdio_inbound_q_done(q)) {
- qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop2);
+ qperf_inc(q, tasklet_inbound_resched2);
if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
tasklet_schedule(&q->tasklet);
}
if (unlikely(irq_ptr->state == QDIO_IRQ_STATE_STOPPED))
return;
- qdio_perf_stat_inc(&perf_stats.pci_int);
-
for_each_input_queue(irq_ptr, q, i)
tasklet_schedule(&q->tasklet);
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
int cstat, dstat;
- qdio_perf_stat_inc(&perf_stats.qdio_int);
-
if (!intparm || !irq_ptr) {
DBF_ERROR("qint:%4x", cdev->private->schid.sch_no);
return;
{
int used, diff;
+ qperf_inc(q, inbound_call);
+
if (!q->u.in.polling)
goto set;
unsigned char state;
int used, rc = 0;
- qdio_perf_stat_inc(&perf_stats.outbound_handler);
+ qperf_inc(q, outbound_call);
count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count);
used = atomic_add_return(count, &q->nr_buf_used);
BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q);
- if (callflags & QDIO_FLAG_PCI_OUT)
+ if (callflags & QDIO_FLAG_PCI_OUT) {
q->u.out.pci_out_enabled = 1;
+ qperf_inc(q, pci_request_int);
+ }
else
q->u.out.pci_out_enabled = 0;
if (state != SLSB_CU_OUTPUT_PRIMED)
rc = qdio_kick_outbound_q(q);
else
- qdio_perf_stat_inc(&perf_stats.fast_requeue);
+ qperf_inc(q, fast_requeue);
out:
tasklet_schedule(&q->tasklet);
rc = qdio_debug_init();
if (rc)
goto out_ti;
- rc = qdio_setup_perf_stats();
- if (rc)
- goto out_debug;
rc = tiqdio_register_thinints();
if (rc)
- goto out_perf;
+ goto out_debug;
return 0;
-out_perf:
- qdio_remove_perf_stats();
out_debug:
qdio_debug_exit();
out_ti:
{
tiqdio_unregister_thinints();
tiqdio_free_memory();
- qdio_remove_perf_stats();
qdio_debug_exit();
qdio_setup_exit();
}
+++ /dev/null
-/*
- * drivers/s390/cio/qdio_perf.c
- *
- * Copyright IBM Corp. 2008
- *
- * Author: Jan Glauber (jang@linux.vnet.ibm.com)
- */
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <asm/ccwdev.h>
-
-#include "cio.h"
-#include "css.h"
-#include "device.h"
-#include "ioasm.h"
-#include "chsc.h"
-#include "qdio_debug.h"
-#include "qdio_perf.h"
-
-int qdio_performance_stats;
-struct qdio_perf_stats perf_stats;
-
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *qdio_perf_pde;
-#endif
-
-/*
- * procfs functions
- */
-static int qdio_perf_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "Number of qdio interrupts\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.qdio_int));
- seq_printf(m, "Number of PCI interrupts\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.pci_int));
- seq_printf(m, "Number of adapter interrupts\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.thin_int));
- seq_printf(m, "\n");
- seq_printf(m, "Inbound tasklet runs\t\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.tasklet_inbound));
- seq_printf(m, "Outbound tasklet runs\t\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.tasklet_outbound));
- seq_printf(m, "Adapter interrupt tasklet runs/loops\t\t: %li/%li\n",
- (long)atomic_long_read(&perf_stats.tasklet_thinint),
- (long)atomic_long_read(&perf_stats.tasklet_thinint_loop));
- seq_printf(m, "Adapter interrupt inbound tasklet runs/loops\t: %li/%li\n",
- (long)atomic_long_read(&perf_stats.thinint_inbound),
- (long)atomic_long_read(&perf_stats.thinint_inbound_loop));
- seq_printf(m, "\n");
- seq_printf(m, "Number of SIGA In issued\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.siga_in));
- seq_printf(m, "Number of SIGA Out issued\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.siga_out));
- seq_printf(m, "Number of SIGA Sync issued\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.siga_sync));
- seq_printf(m, "\n");
- seq_printf(m, "Number of inbound transfers\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.inbound_handler));
- seq_printf(m, "Number of outbound transfers\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.outbound_handler));
- seq_printf(m, "\n");
- seq_printf(m, "Number of fast requeues (outg. SBAL w/o SIGA)\t: %li\n",
- (long)atomic_long_read(&perf_stats.fast_requeue));
- seq_printf(m, "Number of outbound target full condition\t: %li\n",
- (long)atomic_long_read(&perf_stats.outbound_target_full));
- seq_printf(m, "Number of inbound queue full condition\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.inbound_queue_full));
- seq_printf(m, "Number of outbound tasklet mod_timer calls\t: %li\n",
- (long)atomic_long_read(&perf_stats.debug_tl_out_timer));
- seq_printf(m, "Number of stop polling calls\t\t\t: %li\n",
- (long)atomic_long_read(&perf_stats.debug_stop_polling));
- seq_printf(m, "AI inbound tasklet loops after stop polling\t: %li\n",
- (long)atomic_long_read(&perf_stats.thinint_inbound_loop2));
- seq_printf(m, "QEBSM EQBS total/incomplete\t\t\t: %li/%li\n",
- (long)atomic_long_read(&perf_stats.debug_eqbs_all),
- (long)atomic_long_read(&perf_stats.debug_eqbs_incomplete));
- seq_printf(m, "QEBSM SQBS total/incomplete\t\t\t: %li/%li\n",
- (long)atomic_long_read(&perf_stats.debug_sqbs_all),
- (long)atomic_long_read(&perf_stats.debug_sqbs_incomplete));
- seq_printf(m, "\n");
- return 0;
-}
-static int qdio_perf_seq_open(struct inode *inode, struct file *filp)
-{
- return single_open(filp, qdio_perf_proc_show, NULL);
-}
-
-static const struct file_operations qdio_perf_proc_fops = {
- .owner = THIS_MODULE,
- .open = qdio_perf_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/*
- * sysfs functions
- */
-static ssize_t qdio_perf_stats_show(struct bus_type *bus, char *buf)
-{
- return sprintf(buf, "%i\n", qdio_performance_stats ? 1 : 0);
-}
-
-static ssize_t qdio_perf_stats_store(struct bus_type *bus,
- const char *buf, size_t count)
-{
- unsigned long i;
-
- if (strict_strtoul(buf, 16, &i) != 0)
- return -EINVAL;
- if ((i != 0) && (i != 1))
- return -EINVAL;
- if (i == qdio_performance_stats)
- return count;
-
- qdio_performance_stats = i;
- /* reset performance statistics */
- if (i == 0)
- memset(&perf_stats, 0, sizeof(struct qdio_perf_stats));
- return count;
-}
-
-static BUS_ATTR(qdio_performance_stats, 0644, qdio_perf_stats_show,
- qdio_perf_stats_store);
-
-int __init qdio_setup_perf_stats(void)
-{
- int rc;
-
- rc = bus_create_file(&ccw_bus_type, &bus_attr_qdio_performance_stats);
- if (rc)
- return rc;
-
-#ifdef CONFIG_PROC_FS
- memset(&perf_stats, 0, sizeof(struct qdio_perf_stats));
- qdio_perf_pde = proc_create("qdio_perf", S_IFREG | S_IRUGO,
- NULL, &qdio_perf_proc_fops);
-#endif
- return 0;
-}
-
-void qdio_remove_perf_stats(void)
-{
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("qdio_perf", NULL);
-#endif
- bus_remove_file(&ccw_bus_type, &bus_attr_qdio_performance_stats);
-}
+++ /dev/null
-/*
- * drivers/s390/cio/qdio_perf.h
- *
- * Copyright IBM Corp. 2008
- *
- * Author: Jan Glauber (jang@linux.vnet.ibm.com)
- */
-#ifndef QDIO_PERF_H
-#define QDIO_PERF_H
-
-#include <linux/types.h>
-#include <asm/atomic.h>
-
-struct qdio_perf_stats {
- /* interrupt handler calls */
- atomic_long_t qdio_int;
- atomic_long_t pci_int;
- atomic_long_t thin_int;
-
- /* tasklet runs */
- atomic_long_t tasklet_inbound;
- atomic_long_t tasklet_outbound;
- atomic_long_t tasklet_thinint;
- atomic_long_t tasklet_thinint_loop;
- atomic_long_t thinint_inbound;
- atomic_long_t thinint_inbound_loop;
- atomic_long_t thinint_inbound_loop2;
-
- /* signal adapter calls */
- atomic_long_t siga_out;
- atomic_long_t siga_in;
- atomic_long_t siga_sync;
-
- /* misc */
- atomic_long_t inbound_handler;
- atomic_long_t outbound_handler;
- atomic_long_t fast_requeue;
- atomic_long_t outbound_target_full;
- atomic_long_t inbound_queue_full;
-
- /* for debugging */
- atomic_long_t debug_tl_out_timer;
- atomic_long_t debug_stop_polling;
- atomic_long_t debug_eqbs_all;
- atomic_long_t debug_eqbs_incomplete;
- atomic_long_t debug_sqbs_all;
- atomic_long_t debug_sqbs_incomplete;
-};
-
-extern struct qdio_perf_stats perf_stats;
-extern int qdio_performance_stats;
-
-static inline void qdio_perf_stat_inc(atomic_long_t *count)
-{
- if (qdio_performance_stats)
- atomic_long_inc(count);
-}
-
-int qdio_setup_perf_stats(void);
-void qdio_remove_perf_stats(void);
-
-#endif
/*
* linux/drivers/s390/cio/thinint_qdio.c
*
- * thin interrupt support for qdio
- *
- * Copyright 2000-2008 IBM Corp.
+ * Copyright 2000,2009 IBM Corp.
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>
* Cornelia Huck <cornelia.huck@de.ibm.com>
* Jan Glauber <jang@linux.vnet.ibm.com>
#include "ioasm.h"
#include "qdio.h"
#include "qdio_debug.h"
-#include "qdio_perf.h"
/*
* Restriction: only 63 iqdio subchannels would have its own indicator,
{
struct qdio_q *q;
- qdio_perf_stat_inc(&perf_stats.thin_int);
-
/*
* SVS only when needed: issue SVS to benefit from iqdio interrupt
* avoidance (SVS clears adapter interrupt suppression overwrite)
list_for_each_entry_rcu(q, &tiq_list, entry)
/* only process queues from changed sets */
if (*q->irq_ptr->dsci) {
+ qperf_inc(q, adapter_int);
/* only clear it if the indicator is non-shared */
if (!shared_ind(q->irq_ptr))
* u_mult_inv > 128 bytes.
*/
if (copied == 0) {
- int len;
+ unsigned int len;
spin_unlock_bh(&zcrypt_device_lock);
/* len is max 256 / 2 - 120 = 8 */
len = crt->inputdatalength / 2 - 120;
+ if (len > sizeof(z1))
+ return -EFAULT;
z1 = z2 = z3 = 0;
if (copy_from_user(&z1, crt->np_prime, len) ||
copy_from_user(&z2, crt->bp_key, len) ||
zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD;
return -EAGAIN;
}
+ if (service_rc == 8 && service_rs == 72)
+ return -EINVAL;
zdev->online = 0;
return -EAGAIN; /* repeat the request on a different device. */
}
}
if (service_rc == 12 && service_rs == 769)
return -EINVAL;
+ if (service_rc == 8 && service_rs == 72)
+ return -EINVAL;
zdev->online = 0;
return -EAGAIN; /* repeat the request on a different device. */
}
goto out_err;
}
CLAW_DBF_TEXT(2, setup, "init_mod");
- claw_root_dev = root_device_register("qeth");
+ claw_root_dev = root_device_register("claw");
ret = IS_ERR(claw_root_dev) ? PTR_ERR(claw_root_dev) : 0;
if (ret)
goto register_err;
#include <linux/types.h>
#include <linux/miscdevice.h>
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include "zfcp_def.h"
#include "zfcp_ext.h"
}
static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command,
- unsigned long buffer)
+ unsigned long arg)
{
struct zfcp_cfdc_data *data;
struct zfcp_cfdc_data __user *data_user;
if (command != ZFCP_CFDC_IOC)
return -ENOTTY;
- data_user = (void __user *) buffer;
+ if (is_compat_task())
+ data_user = compat_ptr(arg);
+ else
+ data_user = (void __user *)arg;
+
if (!data_user)
return -EINVAL;
break;
zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd);
zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial);
- p += sprintf(*p, "\n");
+ *p += sprintf(*p, "\n");
break;
case FSF_QTCB_OPEN_PORT_WITH_DID:
extern int zfcp_fc_gs_setup(struct zfcp_adapter *);
extern void zfcp_fc_gs_destroy(struct zfcp_adapter *);
extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *);
+extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
extern int zfcp_fsf_status_read(struct zfcp_qdio *);
extern int zfcp_status_read_refill(struct zfcp_adapter *adapter);
extern int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *, struct zfcp_fsf_ct_els *,
- mempool_t *);
+ mempool_t *, unsigned int);
extern int zfcp_fsf_send_els(struct zfcp_adapter *, u32,
- struct zfcp_fsf_ct_els *);
+ struct zfcp_fsf_ct_els *, unsigned int);
extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *,
struct scsi_cmnd *);
extern void zfcp_fsf_req_free(struct zfcp_fsf_req *);
gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn;
ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct,
- adapter->pool.gid_pn_req);
+ adapter->pool.gid_pn_req,
+ ZFCP_FC_CTELS_TMO);
if (!ret) {
wait_for_completion(&completion);
zfcp_fc_ns_gid_pn_eval(gid_pn);
hton24(adisc->adisc_req.adisc_port_id,
fc_host_port_id(adapter->scsi_host));
- ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els);
+ ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els,
+ ZFCP_FC_CTELS_TMO);
if (ret)
kmem_cache_free(zfcp_data.adisc_cache, adisc);
ct->req = &gpn_ft->sg_req;
ct->resp = gpn_ft->sg_resp;
- ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL);
+ ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL,
+ ZFCP_FC_CTELS_TMO);
if (!ret)
wait_for_completion(&completion);
return ret;
job->job_done(job);
}
+static struct zfcp_fc_wka_port *zfcp_fc_job_wka_port(struct fc_bsg_job *job)
+{
+ u32 preamble_word1;
+ u8 gs_type;
+ struct zfcp_adapter *adapter;
+
+ preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
+ gs_type = (preamble_word1 & 0xff000000) >> 24;
+
+ adapter = (struct zfcp_adapter *) job->shost->hostdata[0];
+
+ switch (gs_type) {
+ case FC_FST_ALIAS:
+ return &adapter->gs->as;
+ case FC_FST_MGMT:
+ return &adapter->gs->ms;
+ case FC_FST_TIME:
+ return &adapter->gs->ts;
+ break;
+ case FC_FST_DIR:
+ return &adapter->gs->ds;
+ break;
+ default:
+ return NULL;
+ }
+}
+
+static void zfcp_fc_ct_job_handler(void *data)
+{
+ struct fc_bsg_job *job = data;
+ struct zfcp_fc_wka_port *wka_port;
+
+ wka_port = zfcp_fc_job_wka_port(job);
+ zfcp_fc_wka_port_put(wka_port);
+
+ zfcp_fc_ct_els_job_handler(data);
+}
+
static int zfcp_fc_exec_els_job(struct fc_bsg_job *job,
struct zfcp_adapter *adapter)
{
} else
d_id = ntoh24(job->request->rqst_data.h_els.port_id);
- return zfcp_fsf_send_els(adapter, d_id, els);
+ els->handler = zfcp_fc_ct_els_job_handler;
+ return zfcp_fsf_send_els(adapter, d_id, els, job->req->timeout / HZ);
}
static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job,
struct zfcp_adapter *adapter)
{
int ret;
- u8 gs_type;
struct zfcp_fsf_ct_els *ct = job->dd_data;
struct zfcp_fc_wka_port *wka_port;
- u32 preamble_word1;
- preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
- gs_type = (preamble_word1 & 0xff000000) >> 24;
-
- switch (gs_type) {
- case FC_FST_ALIAS:
- wka_port = &adapter->gs->as;
- break;
- case FC_FST_MGMT:
- wka_port = &adapter->gs->ms;
- break;
- case FC_FST_TIME:
- wka_port = &adapter->gs->ts;
- break;
- case FC_FST_DIR:
- wka_port = &adapter->gs->ds;
- break;
- default:
- return -EINVAL; /* no such service */
- }
+ wka_port = zfcp_fc_job_wka_port(job);
+ if (!wka_port)
+ return -EINVAL;
ret = zfcp_fc_wka_port_get(wka_port);
if (ret)
return ret;
- ret = zfcp_fsf_send_ct(wka_port, ct, NULL);
+ ct->handler = zfcp_fc_ct_job_handler;
+ ret = zfcp_fsf_send_ct(wka_port, ct, NULL, job->req->timeout / HZ);
if (ret)
zfcp_fc_wka_port_put(wka_port);
ct_els->req = job->request_payload.sg_list;
ct_els->resp = job->reply_payload.sg_list;
- ct_els->handler = zfcp_fc_ct_els_job_handler;
ct_els->handler_data = job;
switch (job->request->msgcode) {
}
}
+int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *job)
+{
+ /* hardware tracks timeout, reset bsg timeout to not interfere */
+ return -EAGAIN;
+}
+
int zfcp_fc_gs_setup(struct zfcp_adapter *adapter)
{
struct zfcp_fc_wka_ports *wka_ports;
#define ZFCP_FC_GPN_FT_MAX_ENT (ZFCP_FC_GPN_FT_NUM_BUFS * \
(ZFCP_FC_GPN_FT_ENT_PAGE + 1))
+#define ZFCP_FC_CTELS_TMO (2 * FC_DEF_R_A_TOV / 1000)
+
/**
* struct zfcp_fc_gid_pn_req - container for ct header plus gid_pn request
* @ct_hdr: FC GS common transport header
static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req,
struct scatterlist *sg_req,
struct scatterlist *sg_resp,
- int max_sbals)
+ int max_sbals, unsigned int timeout)
{
int ret;
- unsigned int fcp_chan_timeout;
ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
if (ret)
return ret;
/* common settings for ct/gs and els requests */
- fcp_chan_timeout = 2 * FC_DEF_R_A_TOV / 1000;
+ if (timeout > 255)
+ timeout = 255; /* max value accepted by hardware */
req->qtcb->bottom.support.service_class = FSF_CLASS_3;
- req->qtcb->bottom.support.timeout = fcp_chan_timeout;
- zfcp_fsf_start_timer(req, (fcp_chan_timeout + 10) * HZ);
+ req->qtcb->bottom.support.timeout = timeout;
+ zfcp_fsf_start_timer(req, (timeout + 10) * HZ);
return 0;
}
* @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req
*/
int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port,
- struct zfcp_fsf_ct_els *ct, mempool_t *pool)
+ struct zfcp_fsf_ct_els *ct, mempool_t *pool,
+ unsigned int timeout)
{
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
struct zfcp_fsf_req *req;
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp,
- FSF_MAX_SBALS_PER_REQ);
+ FSF_MAX_SBALS_PER_REQ, timeout);
if (ret)
goto failed_send;
* @els: pointer to struct zfcp_send_els with data for the command
*/
int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id,
- struct zfcp_fsf_ct_els *els)
+ struct zfcp_fsf_ct_els *els, unsigned int timeout)
{
struct zfcp_fsf_req *req;
struct zfcp_qdio *qdio = adapter->qdio;
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2);
+ ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2, timeout);
if (ret)
goto failed_send;
.show_host_port_state = 1,
.show_host_active_fc4s = 1,
.bsg_request = zfcp_fc_exec_bsg_job,
+ .bsg_timeout = zfcp_fc_timeout_bsg_job,
/* no functions registered for following dynamic attributes but
directly set by LLDD */
.show_host_port_type = 1,
set_fan_speeds(fp);
}
+static void destroy_one_temp(struct bbc_cpu_temperature *tp)
+{
+ bbc_i2c_detach(tp->client);
+ kfree(tp);
+}
+
+static void destroy_all_temps(struct bbc_i2c_bus *bp)
+{
+ struct bbc_cpu_temperature *tp, *tpos;
+
+ list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
+ list_del(&tp->bp_list);
+ list_del(&tp->glob_list);
+ destroy_one_temp(tp);
+ }
+}
+
+static void destroy_one_fan(struct bbc_fan_control *fp)
+{
+ bbc_i2c_detach(fp->client);
+ kfree(fp);
+}
+
+static void destroy_all_fans(struct bbc_i2c_bus *bp)
+{
+ struct bbc_fan_control *fp, *fpos;
+
+ list_for_each_entry_safe(fp, fpos, &bp->fans, bp_list) {
+ list_del(&fp->bp_list);
+ list_del(&fp->glob_list);
+ destroy_one_fan(fp);
+ }
+}
+
int bbc_envctrl_init(struct bbc_i2c_bus *bp)
{
struct of_device *op;
int err = PTR_ERR(kenvctrld_task);
kenvctrld_task = NULL;
+ destroy_all_temps(bp);
+ destroy_all_fans(bp);
return err;
}
}
return 0;
}
-static void destroy_one_temp(struct bbc_cpu_temperature *tp)
-{
- bbc_i2c_detach(tp->client);
- kfree(tp);
-}
-
-static void destroy_one_fan(struct bbc_fan_control *fp)
-{
- bbc_i2c_detach(fp->client);
- kfree(fp);
-}
-
void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp)
{
- struct bbc_cpu_temperature *tp, *tpos;
- struct bbc_fan_control *fp, *fpos;
-
if (kenvctrld_task)
kthread_stop(kenvctrld_task);
- list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
- list_del(&tp->bp_list);
- list_del(&tp->glob_list);
- destroy_one_temp(tp);
- }
-
- list_for_each_entry_safe(fp, fpos, &bp->fans, bp_list) {
- list_del(&fp->bp_list);
- list_del(&fp->glob_list);
- destroy_one_fan(fp);
- }
+ destroy_all_temps(bp);
+ destroy_all_fans(bp);
}
status = -EINVAL;
}
}
- aac_fib_complete(fibptr);
+ /* Do not set XferState to zero unless receives a response from F/W */
+ if (status >= 0)
+ aac_fib_complete(fibptr);
+
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
if (status >= 0) {
if ((aac_commit == 1) || commit_flag) {
FsaNormal,
1, 1,
NULL, NULL);
- aac_fib_complete(fibptr);
+ /* Do not set XferState to zero unless
+ * receives a response from F/W */
+ if (status >= 0)
+ aac_fib_complete(fibptr);
} else if (aac_commit == 0) {
printk(KERN_WARNING
"aac_get_config_status: Foreign device configurations are being ignored\n");
}
}
- aac_fib_free(fibptr);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibptr);
return status;
}
maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
aac_fib_complete(fibptr);
}
- aac_fib_free(fibptr);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibptr);
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
NULL);
if (rcode < 0) {
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+ /* FIB should be freed only after
+ * getting the response from the F/W */
+ if (rcode != -ERESTARTSYS) {
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ }
return rcode;
}
memcpy(&dev->adapter_info, info, sizeof(*info));
if (rcode >= 0)
memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
+ if (rcode == -ERESTARTSYS) {
+ fibptr = aac_fib_alloc(dev);
+ if (!fibptr)
+ return -ENOMEM;
+ }
+
}
(dev->scsi_host_ptr->sg_tablesize * 8) + 112;
}
}
-
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (rcode != -ERESTARTSYS) {
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ }
return rcode;
}
* Alocate and initialize a Fib
*/
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+ printk(KERN_WARNING "aac_read: fib allocation failed\n");
return -1;
}
* Allocate and initialize a Fib then setup a BlockWrite command
*/
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
- scsicmd->result = DID_ERROR << 16;
- scsicmd->scsi_done(scsicmd);
- return 0;
+ /* FIB temporarily unavailable,not catastrophic failure */
+
+ /* scsicmd->result = DID_ERROR << 16;
+ * scsicmd->scsi_done(scsicmd);
+ * return 0;
+ */
+ printk(KERN_WARNING "aac_write: fib allocation failed\n");
+ return -1;
}
status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
*----------------------------------------------------------------------------*/
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2461
+# define AAC_DRIVER_BUILD 24702
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
u8 printf_enabled;
u8 in_reset;
u8 msi;
+ int management_fib_count;
+ spinlock_t manage_lock;
+
};
#define aac_adapter_interrupt(dev) \
fibptr->hw_fib_pa = hw_fib_pa;
fibptr->hw_fib_va = hw_fib;
}
- if (retval != -EINTR)
+ if (retval != -ERESTARTSYS)
aac_fib_free(fibptr);
return retval;
}
}
if (f.wait) {
if(down_interruptible(&fibctx->wait_sem) < 0) {
- status = -EINTR;
+ status = -ERESTARTSYS;
} else {
/* Lock again and retry */
spin_lock_irqsave(&dev->fib_lock, flags);
u64 addr;
void* p;
if (upsg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
u64 addr;
void* p;
if (usg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
uintptr_t addr;
void* p;
if (usg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
dma_addr_t addr;
void* p;
if (upsg->sg[i].count >
- (dev->adapter_info.options &
+ ((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
- 65536) {
+ 65536)) {
rcode = -EINVAL;
goto cleanup;
}
psg->count = cpu_to_le32(sg_indx+1);
status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
}
- if (status == -EINTR) {
- rcode = -EINTR;
+ if (status == -ERESTARTSYS) {
+ rcode = -ERESTARTSYS;
goto cleanup;
}
for(i=0; i <= sg_indx; i++){
kfree(sg_list[i]);
}
- if (rcode != -EINTR) {
+ if (rcode != -ERESTARTSYS) {
aac_fib_complete(srbfib);
aac_fib_free(srbfib);
}
*/
status = aac_dev_ioctl(dev, cmd, arg);
- if(status != -ENOTTY)
+ if (status != -ENOTTY)
return status;
switch (cmd) {
if (status >= 0)
aac_fib_complete(fibctx);
- aac_fib_free(fibctx);
+ /* FIB should be freed only after getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
return status;
}
/*
* Check the preferred comm settings, defaults from template.
*/
+ dev->management_fib_count = 0;
+ spin_lock_init(&dev->manage_lock);
dev->max_fib_size = sizeof(struct hw_fib);
dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
- sizeof(struct aac_fibhdr)
void aac_fib_free(struct fib *fibptr)
{
- unsigned long flags;
+ unsigned long flags, flagsv;
+
+ spin_lock_irqsave(&fibptr->event_lock, flagsv);
+ if (fibptr->done == 2) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flagsv);
+ return;
+ }
+ spin_unlock_irqrestore(&fibptr->event_lock, flagsv);
spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
struct hw_fib * hw_fib = fibptr->hw_fib_va;
unsigned long flags = 0;
unsigned long qflags;
+ unsigned long mflags = 0;
+
if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
return -EBUSY;
if (!dev->queues)
return -EBUSY;
- if(wait)
+ if (wait) {
+
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ if (dev->management_fib_count >= AAC_NUM_MGT_FIB) {
+ printk(KERN_INFO "No management Fibs Available:%d\n",
+ dev->management_fib_count);
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+ return -EBUSY;
+ }
+ dev->management_fib_count++;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
spin_lock_irqsave(&fibptr->event_lock, flags);
- aac_adapter_deliver(fibptr);
+ }
+
+ if (aac_adapter_deliver(fibptr) != 0) {
+ printk(KERN_ERR "aac_fib_send: returned -EBUSY\n");
+ if (wait) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ dev->management_fib_count--;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+ }
+ return -EBUSY;
+ }
+
/*
* If the caller wanted us to wait for response wait now.
udelay(5);
}
} else if (down_interruptible(&fibptr->event_wait)) {
- fibptr->done = 2;
- up(&fibptr->event_wait);
+ /* Do nothing ... satisfy
+ * down_interruptible must_check */
}
+
spin_lock_irqsave(&fibptr->event_lock, flags);
- if ((fibptr->done == 0) || (fibptr->done == 2)) {
+ if (fibptr->done == 0) {
fibptr->done = 2; /* Tell interrupt we aborted */
spin_unlock_irqrestore(&fibptr->event_lock, flags);
- return -EINTR;
+ return -ERESTARTSYS;
}
spin_unlock_irqrestore(&fibptr->event_lock, flags);
BUG_ON(fibptr->done == 0);
int aac_fib_complete(struct fib *fibptr)
{
+ unsigned long flags;
struct hw_fib * hw_fib = fibptr->hw_fib_va;
/*
* command is complete that we had sent to the adapter and this
* cdb could be reused.
*/
+ spin_lock_irqsave(&fibptr->event_lock, flags);
+ if (fibptr->done == 2) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+
if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
(hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
{
if (status >= 0)
aac_fib_complete(fibctx);
- aac_fib_free(fibctx);
+ /* FIB should be freed only after getting
+ * the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibctx);
}
}
struct fib *fibptr;
if ((fibptr = aac_fib_alloc(dev))) {
+ int status;
__le32 *info;
aac_fib_init(fibptr);
*info = cpu_to_le32(now.tv_sec);
- (void)aac_fib_send(SendHostTime,
+ status = aac_fib_send(SendHostTime,
fibptr,
sizeof(*info),
FsaNormal,
1, 1,
NULL,
NULL);
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+ /* Do not set XferState to zero unless
+ * receives a response from F/W */
+ if (status >= 0)
+ aac_fib_complete(fibptr);
+ /* FIB should be freed only after
+ * getting the response from the F/W */
+ if (status != -ERESTARTSYS)
+ aac_fib_free(fibptr);
}
difference = (long)(unsigned)update_interval*HZ;
} else {
struct hw_fib * hwfib;
struct fib * fib;
int consumed = 0;
- unsigned long flags;
+ unsigned long flags, mflags;
- spin_lock_irqsave(q->lock, flags);
+ spin_lock_irqsave(q->lock, flags);
/*
* Keep pulling response QEs off the response queue and waking
* up the waiters until there are no more QEs. We then return
} else {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
- if (!fib->done)
+ if (!fib->done) {
fib->done = 1;
- up(&fib->event_wait);
+ up(&fib->event_wait);
+ }
spin_unlock_irqrestore(&fib->event_lock, flagv);
+
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ dev->management_fib_count--;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
if (fib->done == 2) {
+ spin_lock_irqsave(&fib->event_lock, flagv);
+ fib->done = 0;
+ spin_unlock_irqrestore(&fib->event_lock, flagv);
aac_fib_complete(fib);
aac_fib_free(fib);
}
unsigned int aac_intr_normal(struct aac_dev * dev, u32 index)
{
+ unsigned long mflags;
dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index));
if ((index & 0x00000002L)) {
struct hw_fib * hw_fib;
unsigned long flagv;
dprintk((KERN_INFO "event_wait up\n"));
spin_lock_irqsave(&fib->event_lock, flagv);
- if (!fib->done)
+ if (!fib->done) {
fib->done = 1;
- up(&fib->event_wait);
+ up(&fib->event_wait);
+ }
spin_unlock_irqrestore(&fib->event_lock, flagv);
+
+ spin_lock_irqsave(&dev->manage_lock, mflags);
+ dev->management_fib_count--;
+ spin_unlock_irqrestore(&dev->manage_lock, mflags);
+
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
+ if (fib->done == 2) {
+ spin_lock_irqsave(&fib->event_lock, flagv);
+ fib->done = 0;
+ spin_unlock_irqrestore(&fib->event_lock, flagv);
+ aac_fib_complete(fib);
+ aac_fib_free(fib);
+ }
+
}
return 0;
}
tinfo->curr.transport_version = 2;
tinfo->goal.transport_version = 2;
tinfo->goal.ppr_options = 0;
- /*
- * Remove any SCBs in the waiting for selection
- * queue that may also be for this target so
- * that command ordering is preserved.
- */
- ahd_freeze_devq(ahd, scb);
- ahd_qinfifo_requeue_tail(ahd, scb);
+ if (scb != NULL) {
+ /*
+ * Remove any SCBs in the waiting
+ * for selection queue that may
+ * also be for this target so that
+ * command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ }
printerror = 0;
}
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
- /*
- * Remove any SCBs in the waiting for selection
- * queue that may also be for this target so that
- * command ordering is preserved.
- */
- ahd_freeze_devq(ahd, scb);
- ahd_qinfifo_requeue_tail(ahd, scb);
+ if (scb != NULL) {
+ /*
+ * Remove any SCBs in the waiting for
+ * selection queue that may also be for
+ * this target so that command ordering
+ * is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ }
printerror = 0;
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
&& ppr_busfree == 0) {
/*ppr_options*/0,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
- /*
- * Remove any SCBs in the waiting for selection
- * queue that may also be for this target so that
- * command ordering is preserved.
- */
- ahd_freeze_devq(ahd, scb);
- ahd_qinfifo_requeue_tail(ahd, scb);
+ if (scb != NULL) {
+ /*
+ * Remove any SCBs in the waiting for
+ * selection queue that may also be for
+ * this target so that command ordering
+ * is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ }
printerror = 0;
} else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
&& ahd_sent_msg(ahd, AHDMSG_1B,
* the message phases. We check it last in case we
* had to send some other message that caused a busfree.
*/
- if (printerror != 0
+ if (scb != NULL && printerror != 0
&& (lastphase == P_MESGIN || lastphase == P_MESGOUT)
&& ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
static int is_cxgb3_dev(struct net_device *dev)
{
struct cxgb3i_sdev_data *cdata;
+ struct net_device *ndev = dev;
+
+ if (dev->priv_flags & IFF_802_1Q_VLAN)
+ ndev = vlan_dev_real_dev(dev);
write_lock(&cdata_rwlock);
list_for_each_entry(cdata, &cdata_list, list) {
int i;
for (i = 0; i < ports->nports; i++)
- if (dev == ports->lldevs[i]) {
+ if (ndev == ports->lldevs[i]) {
write_unlock(&cdata_rwlock);
return 1;
}
return -EINVAL;
}
+/**
+ * cxgb3i_find_dev - find the interface associated with the given address
+ * @ipaddr: ip address
+ */
+static struct net_device *
+cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr)
+{
+ struct flowi fl;
+ int err;
+ struct rtable *rt;
+
+ memset(&fl, 0, sizeof(fl));
+ fl.nl_u.ip4_u.daddr = ipaddr;
+
+ err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl);
+ if (!err)
+ return (&rt->u.dst)->dev;
+
+ return NULL;
+}
/**
* cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address
struct cxgb3i_sdev_data *cdata;
struct t3cdev *cdev;
__be32 sipv4;
+ struct net_device *dstdev;
int err;
c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
c3cn->daddr.sin_port = usin->sin_port;
c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
+ dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr);
+ if (!dstdev || !is_cxgb3_dev(dstdev))
+ return -ENETUNREACH;
+
+ if (dstdev->priv_flags & IFF_802_1Q_VLAN)
+ dev = dstdev;
+
rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
c3cn->daddr.sin_addr.s_addr,
c3cn->saddr.sin_port,
spin_lock_irq(shost->host_lock);
if (vport->fc_rscn_flush) {
/* Another thread is walking fc_rscn_id_list on this vport */
- spin_unlock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_DISCOVERY;
+ spin_unlock_irq(shost->host_lock);
/* Send back ACC */
lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
return 0;
lpfc_initial_fdisc(vport);
break;
}
-
} else {
+ vport->vpi_state |= LPFC_VPI_REGISTERED;
if (vport == phba->pport)
if (phba->sli_rev < LPFC_SLI_REV4)
lpfc_issue_fabric_reglogin(vport);
if (phba->link_state == LPFC_LINK_DOWN)
return 0;
+
+ /* Block all SCSI stack I/Os */
+ lpfc_scsi_dev_block(phba);
+
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
if (phba->link_state > LPFC_LINK_DOWN) {
* to book keeping the FCFIs can be used.
*/
if (shdr_status || shdr_add_status) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2521 READ_FCF_RECORD mailbox failed "
- "with status x%x add_status x%x, mbx\n",
- shdr_status, shdr_add_status);
+ if (shdr_status == STATUS_FCF_TABLE_EMPTY) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2726 READ_FCF_RECORD Indicates empty "
+ "FCF table.\n");
+ } else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2521 READ_FCF_RECORD mailbox failed "
+ "with status x%x add_status x%x, mbx\n",
+ shdr_status, shdr_add_status);
+ }
goto out;
}
/* Interpreting the returned information of FCF records */
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
return;
}
+ spin_lock_irq(&phba->hbalock);
vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
+ spin_unlock_irq(&phba->hbalock);
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
lpfc_initial_fdisc(vport);
mb->mbxStatus);
break;
}
+ spin_lock_irq(&phba->hbalock);
vport->vpi_state &= ~LPFC_VPI_REGISTERED;
+ vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(&phba->hbalock);
vport->unreg_vpi_cmpl = VPORT_OK;
mempool_free(pmb, phba->mbox_mem_pool);
/*
(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
lpfc_mbx_unreg_vpi(vports[i]);
+ spin_lock_irq(&phba->hbalock);
vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
+ spin_unlock_irq(&phba->hbalock);
}
lpfc_destroy_vport_work_array(phba, vports);
};
#define LPFC_HDR_BUF_SIZE 128
-#define LPFC_DATA_BUF_SIZE 4096
+#define LPFC_DATA_BUF_SIZE 2048
struct rq_context {
uint32_t word0;
#define lpfc_rq_context_rq_size_SHIFT 16
#define STATUS_ERROR_ACITMAIN 0x2a
#define STATUS_REBOOT_REQUIRED 0x2c
#define STATUS_FCF_IN_USE 0x3a
+#define STATUS_FCF_TABLE_EMPTY 0x43
struct lpfc_mbx_sli4_config {
struct mbox_header header;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
+ uint32_t link_state;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
break;
/*
* Currently, driver support only one FCF - so treat this as
- * a link down.
+ * a link down, but save the link state because we don't want
+ * it to be changed to Link Down unless it is already down.
*/
+ link_state = phba->link_state;
lpfc_linkdown(phba);
+ phba->link_state = link_state;
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
error = -ENODEV;
goto out_free_sysfs_attr;
}
+ /* Default to single FCP EQ for non-MSI-X */
+ if (phba->intr_type != MSIX)
+ phba->cfg_fcp_eq_count = 1;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
/* HBQ for ELS and CT traffic. */
static struct lpfc_hbq_init lpfc_els_hbq = {
.rn = 1,
- .entry_count = 200,
+ .entry_count = 256,
.mask_count = 0,
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
int
lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
{
- return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->add_count));
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return 0;
+ else
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->add_count);
}
/**
static int
lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
{
- return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->init_count));
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->entry_count);
+ else
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->init_count);
}
/**
if (rc) {
dma_free_coherent(&phba->pcidev->dev, dma_size,
dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
return -EIO;
}
iocbq->iocb.un.ulpWord[3]);
wqe->generic.word3 = 0;
bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
- bf_set(wqe_xc, &wqe->generic, 1);
/* The entire sequence is transmitted for this IOCB */
xmit_len = total_len;
cmnd = CMD_XMIT_SEQUENCE64_CR;
return dmabuf;
}
temp_hdr = seq_dmabuf->hbuf.virt;
- if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+ if (be16_to_cpu(new_hdr->fh_seq_cnt) <
+ be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_del_init(&seq_dmabuf->hbuf.list);
list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list);
seq_dmabuf->time_stamp = jiffies;
lpfc_update_rcv_time_stamp(vport);
+ if (list_empty(&seq_dmabuf->dbuf.list)) {
+ temp_hdr = dmabuf->hbuf.virt;
+ list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+ return seq_dmabuf;
+ }
/* find the correct place in the sequence to insert this frame */
list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
* If the frame's sequence count is greater than the frame on
* the list then insert the frame right after this frame
*/
- if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+ if (be16_to_cpu(new_hdr->fh_seq_cnt) >
+ be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
return seq_dmabuf;
}
seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* If there is a hole in the sequence count then fail. */
- if (++seq_count != hdr->fh_seq_cnt)
+ if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt))
return 0;
fctl = (hdr->fh_f_ctl[0] << 16 |
hdr->fh_f_ctl[1] << 8 |
struct lpfc_iocbq *first_iocbq, *iocbq;
struct fc_frame_header *fc_hdr;
uint32_t sid;
+ struct ulp_bde64 *pbde;
fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* remove from receive buffer list */
if (!iocbq->context3) {
iocbq->context3 = d_buf;
iocbq->iocb.ulpBdeCount++;
- iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
- LPFC_DATA_BUF_SIZE;
+ pbde = (struct ulp_bde64 *)
+ &iocbq->iocb.unsli3.sli3Words[4];
+ pbde->tus.f.bdeSize = LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
bf_get(lpfc_rcqe_length,
&seq_dmabuf->cq_event.cqe.rcqe_cmpl);
return;
}
/* If not last frame in sequence continue processing frames. */
- if (!lpfc_seq_complete(seq_dmabuf)) {
- /*
- * When saving off frames post a new one and mark this
- * frame to be freed when it is finished.
- **/
- lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
- dmabuf->tag = -1;
+ if (!lpfc_seq_complete(seq_dmabuf))
return;
- }
+
/* Send the complete sequence to the upper layer protocol */
lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
}
/* Multi-queue arrangement for fast-path FCP work queues */
#define LPFC_FN_EQN_MAX 8
#define LPFC_SP_EQN_DEF 1
-#define LPFC_FP_EQN_DEF 1
+#define LPFC_FP_EQN_DEF 4
#define LPFC_FP_EQN_MIN 1
#define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.6"
+#define LPFC_DRIVER_VERSION "8.3.7"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
return VPORT_OK;
}
+ spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_LOADING;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(&phba->hbalock);
/* Use the Physical nodes Fabric NDLP to determine if the link is
* up and ready to FDISC.
}
spin_unlock_irq(&phba->ndlp_lock);
}
- if (vport->vpi_state != LPFC_VPI_REGISTERED)
+ if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
goto skip_logo;
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
}
-static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUGO,
+static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR,
megasas_sysfs_show_poll_mode_io,
megasas_sysfs_set_poll_mode_io);
sense_copied = 1;
}
- if (RES_IS_GSCSI(res->cfg_entry)) {
+ if (RES_IS_GSCSI(res->cfg_entry))
pmcraid_cancel_all(cmd, sense_copied);
- } else if (sense_copied) {
+ else if (sense_copied)
pmcraid_erp_done(cmd);
- return 0;
- } else {
+ else
pmcraid_request_sense(cmd);
- }
return 1;
if (off)
return 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1)
return -EINVAL;
if (start > ha->optrom_size)
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (!capable(CAP_SYS_ADMIN))
return 0;
struct qla_hw_data *ha = vha->hw;
uint8_t *tmp_data;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size ||
!ha->isp_ops->write_nvram)
return 0;
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
- int rval;
+ int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- rval = qla2x00_get_firmware_state(vha, state);
+ if (!vha->hw->flags.eeh_busy)
+ rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
memset(state, -1, sizeof(state));
if (!fcport)
return;
- if (unlikely(pci_channel_offline(fcport->vha->hw->pdev)))
+ if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+ return;
+
+ if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
- else
- qla2x00_abort_fcport_cmds(fcport);
+ return;
+ }
/*
* Transport has effectively 'deleted' the rport, clear
if (!fcport)
return;
+ if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+ return;
+
if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
return;
pfc_host_stat = &ha->fc_host_stat;
memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
+ if (test_bit(UNLOADING, &vha->dpc_flags))
+ goto done;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto done;
+
stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
if (stats == NULL) {
DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
/* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */
/* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */
/* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */
-/* #define QL_DEBUG_LEVEL_17 */ /* Output MULTI-Q trace messages */
+/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */
/*
* Macros use for debugging the driver.
#else
#define DEBUG16(x) do {} while (0)
#endif
+
+#if defined(QL_DEBUG_LEVEL_17)
+#define DEBUG17(x) do {x;} while (0)
+#else
+#define DEBUG17(x) do {} while (0)
+#endif
+
/*
* Firmware Dump structure definition
*/
*/
#define FCF_FABRIC_DEVICE BIT_0
#define FCF_LOGIN_NEEDED BIT_1
-#define FCF_TAPE_PRESENT BIT_2
-#define FCF_FCP2_DEVICE BIT_3
+#define FCF_FCP2_DEVICE BIT_2
/* No loop ID flag. */
#define FC_NO_LOOP_ID 0x1000
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
uint32_t npiv_supported :1;
+ uint32_t pci_channel_io_perm_failure :1;
uint32_t fce_enabled :1;
uint32_t fac_supported :1;
uint32_t chip_reset_done :1;
uint32_t port0 :1;
uint32_t running_gold_fw :1;
+ uint32_t eeh_busy :1;
uint32_t cpu_affinity_enabled :1;
uint32_t disable_msix_handshake :1;
} flags;
extern int
qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+extern int qla2x00_get_data_rate(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_isr.c source file.
*/
switch (data[0]) {
case MBS_COMMAND_COMPLETE:
- if (fcport->flags & FCF_TAPE_PRESENT)
+ if (fcport->flags & FCF_FCP2_DEVICE)
opts |= BIT_1;
rval = qla2x00_get_port_database(vha, fcport, opts);
if (rval != QLA_SUCCESS)
vha->flags.online = 0;
ha->flags.chip_reset_done = 0;
vha->flags.reset_active = 0;
+ ha->flags.pci_channel_io_perm_failure = 0;
+ ha->flags.eeh_busy = 0;
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
uint32_t cnt;
uint16_t cmd;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return;
+
ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
qla24xx_reset_chip(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
+
+ if (pci_channel_offline(ha->pdev) &&
+ ha->flags.pci_channel_io_perm_failure) {
+ return;
+ }
+
ha->isp_ops->disable_intrs(ha);
/* Perform RISC reset. */
clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
clear_bit(RSCN_UPDATE, &vha->dpc_flags);
+ qla2x00_get_data_rate(vha);
+
/* Determine what we need to do */
if (ha->current_topology == ISP_CFG_FL &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
/*
* Logout all previous fabric devices marked lost, except
- * tape devices.
+ * FCP2 devices.
*/
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
qla2x00_mark_device_lost(vha, fcport,
ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
- (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
+ (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
ha->isp_ops->fabric_logout(vha,
fcport->d_id.b24 = new_fcport->d_id.b24;
fcport->flags |= FCF_LOGIN_NEEDED;
if (fcport->loop_id != FC_NO_LOOP_ID &&
- (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
+ (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
rval = qla2x00_fabric_login(vha, fcport, next_loopid);
if (rval == QLA_SUCCESS) {
- /* Send an ADISC to tape devices.*/
+ /* Send an ADISC to FCP2 devices.*/
opts = 0;
- if (fcport->flags & FCF_TAPE_PRESENT)
+ if (fcport->flags & FCF_FCP2_DEVICE)
opts |= BIT_1;
rval = qla2x00_get_port_database(vha, fcport, opts);
if (rval != QLA_SUCCESS) {
/* Requeue all commands in outstanding command list. */
qla2x00_abort_all_cmds(vha, DID_RESET << 16);
+ if (unlikely(pci_channel_offline(ha->pdev) &&
+ ha->flags.pci_channel_io_perm_failure)) {
+ clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+ status = 0;
+ return status;
+ }
+
ha->isp_ops->get_flash_version(vha, req->ring);
ha->isp_ops->nvram_config(vha);
int ret, retries;
struct qla_hw_data *ha = vha->hw;
+ if (ha->flags.pci_channel_io_perm_failure)
+ return;
if (!IS_FWI2_CAPABLE(ha))
return;
if (!ha->fw_major_version)
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_WORD(®->hccr);
reg = &ha->iobase->isp24;
status = 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return IRQ_HANDLED;
+
spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_DWORD(®->hccr);
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_DWORD(®->hccr);
DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no));
+ if (ha->flags.pci_channel_io_perm_failure) {
+ DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX "
+ "Exiting.\n", __func__, vha->host_no));
+ return QLA_FUNCTION_TIMEOUT;
+ }
+
/*
* Wait for active mailbox commands to finish by waiting at most tov
* seconds. This is to serialize actual issuing of mailbox cmds during
/* Check for pending interrupts. */
qla2x00_poll(ha->rsp_q_map[0]);
- if (command != MBC_LOAD_RISC_RAM_EXTENDED &&
- !ha->flags.mbox_int)
+ if (!ha->flags.mbox_int &&
+ !(IS_QLA2200(ha) &&
+ command == MBC_LOAD_RISC_RAM_EXTENDED))
msleep(10);
} /* while */
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "Waited %d sec\n",
+ (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ)));
}
/* Check whether we timed out */
if (rval == QLA_FUNCTION_TIMEOUT &&
mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) {
- if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
+ if (!io_lock_on || (mcp->flags & IOCTL_CMD) ||
+ ha->flags.eeh_busy) {
/* not in dpc. schedule it for dpc to take over. */
DEBUG(printk("%s(%ld): timeout schedule "
"isp_abort_needed.\n", __func__,
base_vha->host_no));
qla_printk(KERN_WARNING, ha,
"Mailbox command timeout occurred. Scheduling ISP "
- "abort.\n");
+ "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy);
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(vha);
} else if (!abort_active) {
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
return rval;
}
+
+int
+qla2x00_get_data_rate(scsi_qla_host_t *vha)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_DATA_RATE;
+ mcp->mb[1] = 0;
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n",
+ __func__, vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): done.\n", __func__, vha->host_no));
+ if (mcp->mb[1] != 0x7)
+ ha->link_data_rate = mcp->mb[1];
+ }
+
+ return rval;
+}
struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
struct scsi_qla_host *vha;
+ spin_lock_irq(&rsp->hw->hardware_lock);
vha = qla25xx_get_host(rsp);
qla24xx_process_response_queue(vha, rsp);
+ spin_unlock_irq(&rsp->hw->hardware_lock);
}
/* create response queue */
srb_t *sp;
int rval;
- if (unlikely(pci_channel_offline(ha->pdev))) {
- if (ha->pdev->error_state == pci_channel_io_frozen)
- cmd->result = DID_REQUEUE << 16;
- else
+ if (ha->flags.eeh_busy) {
+ if (ha->flags.pci_channel_io_perm_failure)
cmd->result = DID_NO_CONNECT << 16;
+ else
+ cmd->result = DID_REQUEUE << 16;
goto qc24_fail_command;
}
#define ABORT_POLLING_PERIOD 1000
#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
+ scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+ struct qla_hw_data *ha = vha->hw;
int ret = QLA_SUCCESS;
+ if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+ return ret;
+ }
+
while (CMD_SP(cmd) && wait_iter--) {
msleep(ABORT_POLLING_PERIOD);
}
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct qla_hw_data *ha = vha->hw;
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
- fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
struct req_que *req = vha->req;
if (sdev->tagged_supported)
scsi_deactivate_tcq(sdev, req->max_q_depth);
rport->dev_loss_tmo = ha->port_down_retry_count;
- if (sdev->type == TYPE_TAPE)
- fcport->flags |= FCF_TAPE_PRESENT;
return 0;
}
/* Set ISP-type information. */
qla2x00_set_isp_flags(ha);
+
+ /* Set EEH reset type to fundamental if required by hba */
+ if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
+ pdev->needs_freset = 1;
+ pci_save_state(pdev);
+ }
+
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
if (ret)
{
struct qla_hw_data *ha = vha->hw;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
+
+ /* Disable timer */
+ if (vha->timer_active)
+ qla2x00_stop_timer(vha);
+
+ /* Kill the kernel thread for this host */
+ if (ha->dpc_thread) {
+ struct task_struct *t = ha->dpc_thread;
+
+ /*
+ * qla2xxx_wake_dpc checks for ->dpc_thread
+ * so we need to zero it out.
+ */
+ ha->dpc_thread = NULL;
+ kthread_stop(t);
+ }
+
qla25xx_delete_queues(vha);
if (ha->flags.fce_enabled)
/* Stop currently executing firmware. */
qla2x00_try_to_stop_firmware(vha);
+ vha->flags.online = 0;
+
/* turn-off interrupts on the card */
if (ha->interrupts_on)
ha->isp_ops->disable_intrs(ha);
fcport->login_retry--;
if (fcport->flags & FCF_FABRIC_DEVICE) {
- if (fcport->flags & FCF_TAPE_PRESENT)
+ if (fcport->flags & FCF_FCP2_DEVICE)
ha->isp_ops->fabric_logout(vha,
fcport->loop_id,
fcport->d_id.b.domain,
if (!base_vha->flags.init_done)
continue;
+ if (ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "qla2x00_do_dpc: dpc_flags: %lx\n",
+ base_vha->dpc_flags));
+ continue;
+ }
+
DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
ha->dpc_active = 1;
int index;
srb_t *sp;
int t;
+ uint16_t w;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
+
+ /* Hardware read to raise pending EEH errors during mailbox waits. */
+ if (!pci_channel_offline(ha->pdev))
+ pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
/*
* Ports - Port down timer.
*
if (!IS_QLA2100(ha) && vha->link_down_timeout)
atomic_set(&vha->loop_state, LOOP_DEAD);
- /* Schedule an ISP abort to return any tape commands. */
+ /*
+ * Schedule an ISP abort to return any FCP2-device
+ * commands.
+ */
/* NPIV - scan physical port only */
if (!vha->vp_idx) {
spin_lock_irqsave(&ha->hardware_lock,
if (sp->ctx)
continue;
sfcp = sp->fcport;
- if (!(sfcp->flags & FCF_TAPE_PRESENT))
+ if (!(sfcp->flags & FCF_FCP2_DEVICE))
continue;
set_bit(ISP_ABORT_NEEDED,
static pci_ers_result_t
qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
- scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
+ scsi_qla_host_t *vha = pci_get_drvdata(pdev);
+ struct qla_hw_data *ha = vha->hw;
+
+ DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
+ state));
switch (state) {
case pci_channel_io_normal:
+ ha->flags.eeh_busy = 0;
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
+ ha->flags.eeh_busy = 1;
pci_disable_device(pdev);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
- qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
+ ha->flags.pci_channel_io_perm_failure = 1;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_NEED_RESET;
struct qla_hw_data *ha = base_vha->hw;
int rc;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+
if (ha->mem_only)
rc = pci_enable_device_mem(pdev);
else
if (rc) {
qla_printk(KERN_WARNING, ha,
"Can't re-enable PCI device after reset.\n");
-
return ret;
}
- pci_set_master(pdev);
if (ha->isp_ops->pci_config(base_vha))
return ret;
+#ifdef QL_DEBUG_LEVEL_17
+ {
+ uint8_t b;
+ uint32_t i;
+
+ printk("slot_reset_1: ");
+ for (i = 0; i < 256; i++) {
+ pci_read_config_byte(ha->pdev, i, &b);
+ printk("%s%02x", (i%16) ? " " : "\n", b);
+ }
+ printk("\n");
+ }
+#endif
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
ret = PCI_ERS_RESULT_RECOVERED;
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "slot_reset-return:ret=%x\n", ret));
+
return ret;
}
struct qla_hw_data *ha = base_vha->hw;
int ret;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+
ret = qla2x00_wait_for_hba_online(base_vha);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"the device failed to resume I/O "
"from slot/link_reset");
}
+
+ ha->flags.eeh_busy = 0;
+
pci_cleanup_aer_uncorrect_error_status(pdev);
}
uint32_t faddr, left, burst;
struct qla_hw_data *ha = vha->hw;
+ if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
+ goto try_fast;
if (offset & 0xfff)
goto slow_read;
if (length < OPTROM_BURST_SIZE)
goto slow_read;
+try_fast:
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k8"
+#define QLA2XXX_VERSION "8.03.01-k10"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
*/
req->next_rq->resid_len = scsi_in(cmd)->resid;
+ scsi_release_buffers(cmd);
blk_end_request_all(req, 0);
- scsi_release_buffers(cmd);
scsi_next_command(cmd);
return;
}
if (!done && i->f->bsg_timeout) {
/* call LLDD to abort the i/o as it has timed out */
err = i->f->bsg_timeout(job);
- if (err)
+ if (err == -EAGAIN) {
+ job->ref_cnt--;
+ return BLK_EH_RESET_TIMER;
+ } else if (err)
printk(KERN_ERR "ERROR: FC BSG request timeout - LLD "
"abort failed with status %d\n", err);
}
}
break;
case INQUIRY:
+ if (lun >= host->max_lun) {
+ cmd->result = DID_NO_CONNECT << 16;
+ done(cmd);
+ return 0;
+ }
if (id != host->max_id - 1)
break;
if (!lun && !cmd->device->channel &&
static void serial21285_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
- disable_irq(IRQ_CONTX);
+ disable_irq_nosync(IRQ_CONTX);
tx_enabled(port) = 0;
}
}
static void serial21285_stop_rx(struct uart_port *port)
{
if (rx_enabled(port)) {
- disable_irq(IRQ_CONRX);
+ disable_irq_nosync(IRQ_CONRX);
rx_enabled(port) = 0;
}
}
/* U.S. Robotics 56K Voice INT PnP*/
{ "USR9190", 0 },
/* Wacom tablets */
- { "WACF004", 0 },
- { "WACF005", 0 },
- { "WACF006", 0 },
- { "WACF007", 0 },
- { "WACF008", 0 },
- { "WACF009", 0 },
- { "WACF00A", 0 },
- { "WACF00B", 0 },
- { "WACF00C", 0 },
+ { "WACFXXX", 0 },
/* Compaq touchscreen */
{ "FPI2002", 0 },
/* Fujitsu Stylistic touchscreens */
{ "FUJ02E5", 0 },
/* Fujitsu P-series tablet PC device */
{ "FUJ02E6", 0 },
+ /* Fujitsu Wacom 2FGT Tablet PC device */
+ { "FUJ02E7", 0 },
/*
* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
* disguise)
int *parity, int *bits)
{
- if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+ if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
/* ok, the port was enabled */
unsigned int ucr2, ubir,ubmr, uartclk;
unsigned int baud_raw;
goto ack_tx_int;
}
+ /* Under some circumstances, we see interrupts reported for
+ * a closed channel. The interrupt mask in R1 is clear, but
+ * R3 still signals the interrupts and we see them when taking
+ * an interrupt for the other channel (this could be a qemu
+ * bug but since the ESCC doc doesn't specify precsiely whether
+ * R3 interrup status bits are masked by R1 interrupt enable
+ * bits, better safe than sorry). --BenH.
+ */
+ if (!ZS_IS_OPEN(uap))
+ goto ack_tx_int;
+
if (uap->port.x_char) {
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
write_zsdata(uap, uap->port.x_char);
}
/*
- * As a last resort, if the quotient is zero,
- * default to 9600 bps
+ * As a last resort, if the range cannot be met then clip to
+ * the nearest chip supported rate.
*/
- if (!hung_up)
- tty_termios_encode_baud_rate(termios, 9600, 9600);
+ if (!hung_up) {
+ if (baud <= min)
+ tty_termios_encode_baud_rate(termios,
+ min + 1, min + 1);
+ else
+ tty_termios_encode_baud_rate(termios,
+ max - 1, max - 1);
+ }
}
-
+ /* Should never happen */
+ WARN_ON(1);
return 0;
}
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* we're going to avoid suspending serial console */
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
mutex_unlock(&port->mutex);
return 0;
}
- uport->suspended = 1;
+ if (console_suspend_enabled || !uart_console(uport))
+ uport->suspended = 1;
if (port->flags & ASYNC_INITIALIZED) {
const struct uart_ops *ops = uport->ops;
int tries;
- set_bit(ASYNCB_SUSPENDED, &port->flags);
- clear_bit(ASYNCB_INITIALIZED, &port->flags);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
- spin_lock_irq(&uport->lock);
- ops->stop_tx(uport);
- ops->set_mctrl(uport, 0);
- ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
+ }
/*
* Wait for the transmitter to empty.
drv->dev_name,
drv->tty_driver->name_base + uport->line);
- ops->shutdown(uport);
+ if (console_suspend_enabled || !uart_console(uport))
+ ops->shutdown(uport);
}
/*
* Disable the console device before suspending.
*/
- if (uart_console(uport))
+ if (console_suspend_enabled && uart_console(uport))
console_stop(uport->cons);
- uart_change_pm(state, 3);
+ if (console_suspend_enabled || !uart_console(uport))
+ uart_change_pm(state, 3);
mutex_unlock(&port->mutex);
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* no need to resume serial console, it wasn't suspended */
- /*
- * First try to use the console cflag setting.
- */
- memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = uport->cons->cflag;
- /*
- * If that's unset, use the tty termios setting.
- */
- if (termios.c_cflag == 0)
- termios = *state->port.tty->termios;
- else {
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_input_baud_rate(&termios);
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_baud_rate(&termios);
- }
- uport->ops->set_termios(uport, &termios, NULL);
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(uport->irq);
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
- ret = ops->startup(uport);
- if (ret == 0) {
- uart_change_speed(state, NULL);
- spin_lock_irq(&uport->lock);
- ops->set_mctrl(uport, uport->mctrl);
- ops->start_tx(uport);
- spin_unlock_irq(&uport->lock);
- set_bit(ASYNCB_INITIALIZED, &port->flags);
- } else {
- /*
- * Failed to resume - maybe hardware went away?
- * Clear the "initialized" flag so we won't try
- * to call the low level drivers shutdown method.
- */
- uart_shutdown(state);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ ret = ops->startup(uport);
+ if (ret == 0) {
+ uart_change_speed(state, NULL);
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, uport->mctrl);
+ ops->start_tx(uport);
+ spin_unlock_irq(&uport->lock);
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
+ } else {
+ /*
+ * Failed to resume - maybe hardware went away?
+ * Clear the "initialized" flag so we won't try
+ * to call the low level drivers shutdown method.
+ */
+ uart_shutdown(state);
+ }
}
clear_bit(ASYNCB_SUSPENDED, &port->flags);
{
struct serial_info *info = link->priv;
- outb(12, info->c950ctrl + 1);
+ if (info->c950ctrl)
+ outb(12, info->c950ctrl + 1);
}
/* request_region? oxsemi branch does no request_region too... */
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
};
MODULE_DEVICE_TABLE(pcmcia, serial_ids);
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/3CCFEM556.cis");
+MODULE_FIRMWARE("cis/3CXEM556.cis");
+MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_555_SER.cis");
+MODULE_FIRMWARE("cis/MT5634ZLX.cis");
+MODULE_FIRMWARE("cis/COMpad2.cis");
+MODULE_FIRMWARE("cis/COMpad4.cis");
+MODULE_FIRMWARE("cis/RS-COM-2P.cis");
+
static struct pcmcia_driver serial_cs_driver = {
.owner = THIS_MODULE,
.drv = {
sci_port->port.ops = &sci_uart_ops;
sci_port->port.iotype = UPIO_MEM;
sci_port->port.line = index;
- sci_port->port.fifosize = 1;
+
+ switch (p->type) {
+ case PORT_SCIFA:
+ sci_port->port.fifosize = 64;
+ break;
+ case PORT_SCIF:
+ sci_port->port.fifosize = 16;
+ break;
+ default:
+ sci_port->port.fifosize = 1;
+ break;
+ }
if (dev) {
sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
{
struct usb_interface *intf = to_usb_interface(dev);
struct asus_oled_dev *odev = usb_get_intfdata(intf);
- int temp = strict_strtoul(buf, 10, NULL);
+ unsigned long value;
+ if (strict_strtoul(buf, 10, &value))
+ return -EINVAL;
- enable_oled(odev, temp);
+ enable_oled(odev, value);
return count;
}
{
struct asus_oled_dev *odev =
(struct asus_oled_dev *) dev_get_drvdata(device);
+ unsigned long value;
- int temp = strict_strtoul(buf, 10, NULL);
+ if (strict_strtoul(buf, 10, &value))
+ return -EINVAL;
- enable_oled(odev, temp);
+ enable_oled(odev, value);
return count;
}
ret_val = medusa_set_videostandard(dev);
- if (ret_val < 0) {
- mutex_unlock(&dev->lock);
+ if (ret_val < 0)
return -EINVAL;
- }
return 1;
}
* 9-0: pr ndes
*/
-#define ET_DMA10_MASK 0x3FF /* 10 bit mask for DMA10W types */
-#define ET_DMA10_WRAP 0x400
-#define ET_DMA4_MASK 0x00F /* 4 bit mask for DMA4W types */
-#define ET_DMA4_WRAP 0x010
-
+#define ET_DMA12_MASK 0x0FFF /* 12 bit mask for DMA12W types */
+#define ET_DMA12_WRAP 0x1000
+#define ET_DMA10_MASK 0x03FF /* 10 bit mask for DMA10W types */
+#define ET_DMA10_WRAP 0x0400
+#define ET_DMA4_MASK 0x000F /* 4 bit mask for DMA4W types */
+#define ET_DMA4_WRAP 0x0010
+
+#define INDEX12(x) ((x) & ET_DMA12_MASK)
#define INDEX10(x) ((x) & ET_DMA10_MASK)
#define INDEX4(x) ((x) & ET_DMA4_MASK)
*v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
}
+extern inline void add_12bit(u32 *v, int n)
+{
+ *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP);
+}
+
/*
* 10bit DMA with wrap
* txdma tx queue write address reg in txdma address map at 0x1010
/* Indicate that we have used this PSR entry. */
/* FIXME wrap 12 */
- rx_local->local_psr_full = (rx_local->local_psr_full + 1) & 0xFFF;
- if (rx_local->local_psr_full > rx_local->PsrNumEntries - 1) {
+ add_12bit(&rx_local->local_psr_full, 1);
+ if ((rx_local->local_psr_full & 0xFFF) > rx_local->PsrNumEntries - 1) {
/* Clear psr full and toggle the wrap bit */
- rx_local->local_psr_full &= 0xFFF;
+ rx_local->local_psr_full &= ~0xFFF;
rx_local->local_psr_full ^= 0x1000;
}
* retrieve the initialized message and event pages. Otherwise, we create and
* initialize the message and event pages.
*/
-int HvSynicInit(u32 irqVector)
+void HvSynicInit(void *irqarg)
{
u64 version;
union hv_synic_simp simp;
union hv_synic_sint sharedSint;
union hv_synic_scontrol sctrl;
u64 guestID;
- int ret = 0;
+ u32 irqVector = *((u32 *)(irqarg));
+ int cpu = smp_processor_id();
DPRINT_ENTER(VMBUS);
if (!gHvContext.HypercallPage) {
DPRINT_EXIT(VMBUS);
- return ret;
+ return;
}
/* Check the version */
*/
rdmsrl(HV_X64_MSR_GUEST_OS_ID, guestID);
if (guestID == HV_LINUX_GUEST_ID) {
- gHvContext.synICMessagePage[0] =
+ gHvContext.synICMessagePage[cpu] =
phys_to_virt(simp.BaseSimpGpa << PAGE_SHIFT);
- gHvContext.synICEventPage[0] =
+ gHvContext.synICEventPage[cpu] =
phys_to_virt(siefp.BaseSiefpGpa << PAGE_SHIFT);
} else {
DPRINT_ERR(VMBUS, "unknown guest id!!");
goto Cleanup;
}
DPRINT_DBG(VMBUS, "MAPPED: Simp: %p, Sifep: %p",
- gHvContext.synICMessagePage[0],
- gHvContext.synICEventPage[0]);
+ gHvContext.synICMessagePage[cpu],
+ gHvContext.synICEventPage[cpu]);
} else {
- gHvContext.synICMessagePage[0] = osd_PageAlloc(1);
- if (gHvContext.synICMessagePage[0] == NULL) {
+ gHvContext.synICMessagePage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC);
+ if (gHvContext.synICMessagePage[cpu] == NULL) {
DPRINT_ERR(VMBUS,
"unable to allocate SYNIC message page!!");
goto Cleanup;
}
- gHvContext.synICEventPage[0] = osd_PageAlloc(1);
- if (gHvContext.synICEventPage[0] == NULL) {
+ gHvContext.synICEventPage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC);
+ if (gHvContext.synICEventPage[cpu] == NULL) {
DPRINT_ERR(VMBUS,
"unable to allocate SYNIC event page!!");
goto Cleanup;
/* Setup the Synic's message page */
rdmsrl(HV_X64_MSR_SIMP, simp.AsUINT64);
simp.SimpEnabled = 1;
- simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[0])
+ simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[cpu])
>> PAGE_SHIFT;
DPRINT_DBG(VMBUS, "HV_X64_MSR_SIMP msr set to: %llx",
/* Setup the Synic's event page */
rdmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64);
siefp.SiefpEnabled = 1;
- siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[0])
+ siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[cpu])
>> PAGE_SHIFT;
DPRINT_DBG(VMBUS, "HV_X64_MSR_SIEFP msr set to: %llx",
DPRINT_EXIT(VMBUS);
- return ret;
+ return;
Cleanup:
- ret = -1;
-
if (gHvContext.GuestId == HV_LINUX_GUEST_ID) {
- if (gHvContext.synICEventPage[0])
- osd_PageFree(gHvContext.synICEventPage[0], 1);
+ if (gHvContext.synICEventPage[cpu])
+ osd_PageFree(gHvContext.synICEventPage[cpu], 1);
- if (gHvContext.synICMessagePage[0])
- osd_PageFree(gHvContext.synICMessagePage[0], 1);
+ if (gHvContext.synICMessagePage[cpu])
+ osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
}
DPRINT_EXIT(VMBUS);
-
- return ret;
+ return;
}
/**
* HvSynicCleanup - Cleanup routine for HvSynicInit().
*/
-void HvSynicCleanup(void)
+void HvSynicCleanup(void *arg)
{
union hv_synic_sint sharedSint;
union hv_synic_simp simp;
union hv_synic_siefp siefp;
+ int cpu = smp_processor_id();
DPRINT_ENTER(VMBUS);
sharedSint.Masked = 1;
+ /* Need to correctly cleanup in the case of SMP!!! */
/* Disable the interrupt */
wrmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, sharedSint.AsUINT64);
wrmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64);
- osd_PageFree(gHvContext.synICMessagePage[0], 1);
- osd_PageFree(gHvContext.synICEventPage[0], 1);
+ osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
+ osd_PageFree(gHvContext.synICEventPage[cpu], 1);
}
DPRINT_EXIT(VMBUS);
},
};
-#define MAX_NUM_CPUS 1
+#define MAX_NUM_CPUS 32
struct hv_input_signal_event_buffer {
extern u16 HvSignalEvent(void);
-extern int HvSynicInit(u32 irqVector);
+extern void HvSynicInit(void *irqarg);
-extern void HvSynicCleanup(void);
+extern void HvSynicCleanup(void *arg);
#endif /* __HV_H__ */
/* strcpy(dev->name, "vmbus"); */
/* SynIC setup... */
- ret = HvSynicInit(*irqvector);
+ on_each_cpu(HvSynicInit, (void *)irqvector, 1);
/* Connect to VMBus in the root partition */
ret = VmbusConnect();
DPRINT_ENTER(VMBUS);
VmbusChannelReleaseUnattachedChannels();
VmbusDisconnect();
- HvSynicCleanup();
+ on_each_cpu(HvSynicCleanup, NULL, 1);
DPRINT_EXIT(VMBUS);
return ret;
*/
static void VmbusOnMsgDPC(struct hv_driver *drv)
{
- void *page_addr = gHvContext.synICMessagePage[0];
+ int cpu = smp_processor_id();
+ void *page_addr = gHvContext.synICMessagePage[cpu];
struct hv_message *msg = (struct hv_message *)page_addr +
VMBUS_MESSAGE_SINT;
struct hv_message *copied;
static int VmbusOnISR(struct hv_driver *drv)
{
int ret = 0;
+ int cpu = smp_processor_id();
void *page_addr;
struct hv_message *msg;
union hv_synic_event_flags *event;
- page_addr = gHvContext.synICMessagePage[0];
+ page_addr = gHvContext.synICMessagePage[cpu];
msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT;
DPRINT_ENTER(VMBUS);
}
/* TODO: Check if there are events to be process */
- page_addr = gHvContext.synICEventPage[0];
+ page_addr = gHvContext.synICEventPage[cpu];
event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT;
/* Since we are a child, we only need to check bit 0 */
return 0;
/* allocate 2^1 pages = 8K (on i386);
* should be more than enough for one device */
- pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+ pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
if (!pages_start)
return -ENOMEM;
}
}
if (cur_alt && new_alt) {
+ struct usb_interface *iface = usb_ifnum_to_if(udev,
+ cur_alt->desc.bInterfaceNumber);
+
+ if (iface->resetting_device) {
+ /*
+ * The USB core just reset the device, so the xHCI host
+ * and the device will think alt setting 0 is installed.
+ * However, the USB core will pass in the alternate
+ * setting installed before the reset as cur_alt. Dig
+ * out the alternate setting 0 structure, or the first
+ * alternate setting if a broken device doesn't have alt
+ * setting 0.
+ */
+ cur_alt = usb_altnum_to_altsetting(iface, 0);
+ if (!cur_alt)
+ cur_alt = &iface->altsetting[0];
+ }
+
/* Drop all the endpoints in the current alt setting */
for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
ret = hcd->driver->drop_endpoint(hcd, udev,
USB_PORT_FEAT_C_SUSPEND);
udev = hdev->children[i-1];
if (udev) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+
usb_lock_device(udev);
ret = remote_wakeup(hdev->
children[i-1]);
usb_enable_interface(udev, intf, true);
ret = 0;
} else {
- /* We've just reset the device, so it will think alt
- * setting 0 is installed. For usb_set_interface() to
- * work properly, we need to set the current alternate
- * interface setting to 0 (or the first alt setting, if
- * the device doesn't have alt setting 0).
+ /* Let the bandwidth allocation function know that this
+ * device has been reset, and it will have to use
+ * alternate setting 0 as the current alternate setting.
*/
- intf->cur_altsetting =
- usb_find_alt_setting(config, i, 0);
- if (!intf->cur_altsetting)
- intf->cur_altsetting =
- &config->intf_cache[i]->altsetting[0];
+ intf->resetting_device = 1;
ret = usb_set_interface(udev, desc->bInterfaceNumber,
desc->bAlternateSetting);
+ intf->resetting_device = 0;
}
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
if (index <= 0)
return NULL;
- buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
if (buf) {
len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
- smallbuf = kmalloc(++len, GFP_KERNEL);
+ smallbuf = kmalloc(++len, GFP_NOIO);
if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
case USB_SPEED_HIGH:
speed = "480";
break;
+ case USB_SPEED_VARIABLE:
+ speed = "480";
+ break;
+ case USB_SPEED_SUPER:
+ speed = "5000";
+ break;
default:
speed = "unknown";
}
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
- * stop that signaling.
+ * stop that signaling. Use 5 ms extra for safety,
+ * like usb_port_resume() does.
*/
- ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
del_timer_sync(&ehci->watchdog);
del_timer_sync(&ehci->iaa_watchdog);
- port = HCS_N_PORTS (ehci->hcs_params);
spin_lock_irq (&ehci->lock);
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ if (hcd->self.root_hub->do_remote_wakeup) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (ehci->reset_done[port] != 0) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because "
+ "port %d is resuming\n",
+ port + 1);
+ return -EBUSY;
+ }
+ }
+ }
+
/* stop schedules, clean any completed work */
if (HC_IS_RUNNING(hcd->state)) {
ehci_quiesce (ehci);
*/
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
+ port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
* But interval 1 scheduling is simpler, and
* includes high bandwidth.
*/
- dbg ("intr period %d uframes, NYET!",
- urb->interval);
- goto done;
+ urb->interval = 1;
+ } else if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period << 3;
}
} else {
int think_time;
usb_calc_bus_time (urb->dev->speed,
is_input, 0, max_packet (maxp)));
qh->period = urb->interval;
+ if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period;
+ }
}
}
static void fhci_usb_free(void *lld)
{
struct fhci_usb *usb = lld;
- struct fhci_hcd *fhci = usb->fhci;
+ struct fhci_hcd *fhci;
if (usb) {
+ fhci = usb->fhci;
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
fhci_ep0_free(usb);
kfree(usb->actual_frame);
dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n",
istl_size / 2, istl_size, 0, istl_size / 2);
- dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n",
ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
intl_size, istl_size);
- dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n",
atl_buffers, atl_blksize - PTD_HEADER_SIZE,
atl_size, istl_size + intl_size);
dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total,
void __iomem *data_reg;
int irq;
int retval = 0;
+ struct resource *irq_res;
+ unsigned int irq_flags = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized this the three resources and probably board
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0) {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!addr || !data || !irq_res) {
retval = -ENODEV;
goto err1;
}
+ irq = irq_res->start;
#ifdef CONFIG_USB_HCD_DMA
if (pdev->dev.dma_mask) {
}
#endif
-#ifdef CONFIG_ARM
- if (isp1362_hcd->board)
- set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+ irq_flags |= IRQF_TRIGGER_RISING;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+ irq_flags |= IRQF_TRIGGER_FALLING;
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+ irq_flags |= IRQF_TRIGGER_HIGH;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+ irq_flags |= IRQF_TRIGGER_LOW;
- retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
pr_info("%s, irq %d\n", hcd->product_desc, irq);
if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
u32 buffstatus;
- /* XXX
+ /*
* NAKs are handled in HW by the chip. Usually if the
* device is not able to send data fast enough.
- * This did not trigger for a long time now.
+ * This happens mostly on slower hardware.
*/
- printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
"%d of %zu done: %08x cur: %08x\n", qtd,
urb, qh, PTD_XFERRED_LENGTH(dw3),
qtd->length, done_map,
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
rc = -ESHUTDOWN;
- else if (!uhci->dead)
+ else if (uhci->dead)
+ ; /* Dead controllers tell no tales */
+
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ else if (hcd->self.root_hub->do_remote_wakeup &&
+ uhci->resuming_ports) {
+ dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+ "is resuming\n");
+ rc = -EBUSY;
+ } else
suspend_rh(uhci, UHCI_RH_SUSPENDED);
spin_unlock_irq(&uhci->lock);
return rc;
/* Port received a wakeup request */
set_bit(port, &uhci->resuming_ports);
uhci->ports_timeout = jiffies +
- msecs_to_jiffies(20);
+ msecs_to_jiffies(25);
/* Make sure we see the port again
* after the resuming period is over. */
dbg("%s - port %d", __func__, port->number);
- if (serial->type->max_in_flight_urbs) {
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ if (serial->type->max_in_flight_urbs)
chars = port->tx_bytes_flight;
- spin_unlock_irqrestore(&port->lock, flags);
- } else if (serial->num_bulk_out)
+ else if (serial->num_bulk_out)
chars = kfifo_len(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - returns %d", __func__, chars);
return chars;
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->max_in_flight_urbs) {
+ kfree(urb->transfer_buffer);
+
spin_lock_irqsave(&port->lock, flags);
--port->urbs_in_flight;
port->tx_bytes_flight -= urb->transfer_buffer_length;
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
- "INTOVA",
- "Pixtreme",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
*/
u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
unsigned f = 0;
- unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+ unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+ US_FL_FIX_CAPACITY |
US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
if (!pdata)
return -ENXIO;
- omapbl_ops.check_fb = pdata->check_fb;
-
bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL);
if (unlikely(!bl))
return -ENOMEM;
struct omapfb_color_key color_key;
} dispc;
-static struct platform_device omapdss_device = {
- .name = "omapdss",
- .id = -1,
-};
-
static void enable_lcd_clocks(int enable);
static void inline dispc_write_reg(int idx, u32 val)
static int get_dss_clocks(void)
{
- dispc.dss_ick = clk_get(&omapdss_device.dev, "ick");
+ dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
if (IS_ERR(dispc.dss_ick)) {
dev_err(dispc.fbdev->dev, "can't get ick\n");
return PTR_ERR(dispc.dss_ick);
}
- dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck");
+ dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
if (IS_ERR(dispc.dss1_fck)) {
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
clk_put(dispc.dss_ick);
return PTR_ERR(dispc.dss1_fck);
}
- dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck");
+ dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_fck");
if (IS_ERR(dispc.dss_54m_fck)) {
dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
clk_put(dispc.dss_ick);
int skip_init = 0;
int i;
- r = platform_device_register(&omapdss_device);
- if (r) {
- dev_err(fbdev->dev, "can't register omapdss device\n");
- return r;
- }
-
memset(&dispc, 0, sizeof(dispc));
dispc.base = ioremap(DISPC_BASE, SZ_1K);
free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
put_dss_clocks();
iounmap(dispc.base);
- platform_device_unregister(&omapdss_device);
}
const struct lcd_ctrl omap2_int_ctrl = {
},
};
-static int htcherald_panel_drv_init(void)
+static int __init htcherald_panel_drv_init(void)
{
return platform_driver_register(&htcherald_panel_driver);
}
-static void htcherald_panel_drv_cleanup(void)
+static void __exit htcherald_panel_drv_cleanup(void)
{
platform_driver_unregister(&htcherald_panel_driver);
}
struct omapfb_mem_desc mem_desc;
struct fb_info *fb_info[OMAPFB_PLANE_NUM];
+
+ struct platform_device *dssdev; /* dummy dev for clocks */
};
#ifdef CONFIG_ARCH_OMAP1
{ 1 << OMAPFB_COLOR_YUY422, "YUY422", },
};
+static void omapdss_release(struct device *dev)
+{
+}
+
+/* dummy device for clocks */
+static struct platform_device omapdss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .release = omapdss_release,
+ },
+};
+
/*
* ---------------------------------------------------------------------------
* LCD panel
fbdev->dev = &pdev->dev;
fbdev->panel = panel;
+ fbdev->dssdev = &omapdss_device;
platform_set_drvdata(pdev, fbdev);
mutex_init(&fbdev->rqueue_mutex);
static int omapfb_probe(struct platform_device *pdev)
{
+ int r;
+
BUG_ON(fbdev_pdev != NULL);
+ r = platform_device_register(&omapdss_device);
+ if (r) {
+ dev_err(&pdev->dev, "can't register omapdss device\n");
+ return r;
+ }
+
/* Delay actual initialization until the LCD is registered */
fbdev_pdev = pdev;
if (fbdev_panel != NULL)
fbdev->state = OMAPFB_DISABLED;
omapfb_free_resources(fbdev, saved_state);
+ platform_device_unregister(&omapdss_device);
+ fbdev->dssdev = NULL;
+
return 0;
}
static int rfbi_get_clocks(void)
{
- rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick");
+ rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
if (IS_ERR(rfbi.dss_ick)) {
dev_err(rfbi.fbdev->dev, "can't get ick\n");
return PTR_ERR(rfbi.dss_ick);
}
- rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck");
+ rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
if (IS_ERR(rfbi.dss1_fck)) {
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
clk_put(rfbi.dss_ick);
This enables debug messages. You need to enable printing
with 'debug' module parameter.
+config OMAP2_DSS_COLLECT_IRQ_STATS
+ bool "Collect DSS IRQ statistics"
+ depends on OMAP2_DSS_DEBUG_SUPPORT
+ default n
+ help
+ Collect DSS IRQ statistics, printable via debugfs
+
config OMAP2_DSS_RFBI
bool "RFBI support"
default n
dss_clk_disable_all_no_ctx();
}
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
/* CLOCKS */
static void core_dump_clocks(struct seq_file *s)
{
clocks[i]->usecount);
}
}
+#endif /* defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) */
static int dss_get_clock(struct clk **clock, const char *clk_name)
{
debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
&dss_debug_dump_clocks, &dss_debug_fops);
+ debugfs_create_file("dispc_irq", S_IRUGO, dss_debugfs_dir,
+ &dispc_dump_irqs, &dss_debug_fops);
+
+#ifdef CONFIG_OMAP2_DSS_DSI
+ debugfs_create_file("dsi_irq", S_IRUGO, dss_debugfs_dir,
+ &dsi_dump_irqs, &dss_debug_fops);
+#endif
+
debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
&dss_dump_regs, &dss_debug_fops);
debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir,
DISPC_VID_ATTRIBUTES(0),
DISPC_VID_ATTRIBUTES(1) };
+struct dispc_irq_stats {
+ unsigned long last_reset;
+ unsigned irq_count;
+ unsigned irqs[32];
+};
+
static struct {
void __iomem *base;
struct work_struct error_work;
u32 ctx[DISPC_SZ_REGS / sizeof(u32)];
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spinlock_t irq_stats_lock;
+ struct dispc_irq_stats irq_stats;
+#endif
} dispc;
static void _omap_dispc_set_irqs(void);
do_div(tmp, 2 * out_height * ppl);
fclk = tmp;
- if (height > 2 * out_height && ppl != out_width) {
+ if (height > 2 * out_height) {
+ if (ppl == out_width)
+ return 0;
+
tmp = pclk * (height - 2 * out_height) * out_width;
do_div(tmp, 2 * out_height * (ppl - out_width));
fclk = max(fclk, (u32) tmp);
DSSDBG("required fclk rate = %lu Hz\n", fclk);
DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
- if (fclk > dispc_fclk_rate()) {
+ if (!fclk || fclk > dispc_fclk_rate()) {
DSSERR("failed to set up scaling, "
"required fclk rate = %lu Hz, "
"current fclk rate = %lu Hz\n",
enable_clocks(0);
}
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+void dispc_dump_irqs(struct seq_file *s)
+{
+ unsigned long flags;
+ struct dispc_irq_stats stats;
+
+ spin_lock_irqsave(&dispc.irq_stats_lock, flags);
+
+ stats = dispc.irq_stats;
+ memset(&dispc.irq_stats, 0, sizeof(dispc.irq_stats));
+ dispc.irq_stats.last_reset = jiffies;
+
+ spin_unlock_irqrestore(&dispc.irq_stats_lock, flags);
+
+ seq_printf(s, "period %u ms\n",
+ jiffies_to_msecs(jiffies - stats.last_reset));
+
+ seq_printf(s, "irqs %d\n", stats.irq_count);
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d\n", #x, stats.irqs[ffs(DISPC_IRQ_##x)-1]);
+
+ PIS(FRAMEDONE);
+ PIS(VSYNC);
+ PIS(EVSYNC_EVEN);
+ PIS(EVSYNC_ODD);
+ PIS(ACBIAS_COUNT_STAT);
+ PIS(PROG_LINE_NUM);
+ PIS(GFX_FIFO_UNDERFLOW);
+ PIS(GFX_END_WIN);
+ PIS(PAL_GAMMA_MASK);
+ PIS(OCP_ERR);
+ PIS(VID1_FIFO_UNDERFLOW);
+ PIS(VID1_END_WIN);
+ PIS(VID2_FIFO_UNDERFLOW);
+ PIS(VID2_END_WIN);
+ PIS(SYNC_LOST);
+ PIS(SYNC_LOST_DIGIT);
+ PIS(WAKEUP);
+#undef PIS
+}
+#else
+void dispc_dump_irqs(struct seq_file *s) { }
+#endif
+
void dispc_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r))
irqstatus = dispc_read_reg(DISPC_IRQSTATUS);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock(&dispc.irq_stats_lock);
+ dispc.irq_stats.irq_count++;
+ dss_collect_irq_stats(irqstatus, dispc.irq_stats.irqs);
+ spin_unlock(&dispc.irq_stats_lock);
+#endif
+
#ifdef DEBUG
if (dss_debug)
print_irq_status(irqstatus);
spin_lock_init(&dispc.irq_lock);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock_init(&dispc.irq_stats_lock);
+ dispc.irq_stats.last_reset = jiffies;
+#endif
+
INIT_WORK(&dispc.error_work, dispc_error_worker);
dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
struct omap_dss_device *device;
};
+struct dsi_irq_stats {
+ unsigned long last_reset;
+ unsigned irq_count;
+ unsigned dsi_irqs[32];
+ unsigned vc_irqs[4][32];
+ unsigned cio_irqs[32];
+};
+
static struct
{
void __iomem *base;
#endif
int debug_read;
int debug_write;
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spinlock_t irq_stats_lock;
+ struct dsi_irq_stats irq_stats;
+#endif
} dsi;
#ifdef DEBUG
irqstatus = dsi_read_reg(DSI_IRQSTATUS);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock(&dsi.irq_stats_lock);
+ dsi.irq_stats.irq_count++;
+ dss_collect_irq_stats(irqstatus, dsi.irq_stats.dsi_irqs);
+#endif
+
if (irqstatus & DSI_IRQ_ERROR_MASK) {
DSSERR("DSI error, irqstatus %x\n", irqstatus);
print_irq_status(irqstatus);
vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i));
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]);
+#endif
+
if (vcstatus & DSI_VC_IRQ_BTA)
complete(&dsi.bta_completion);
if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) {
ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ dss_collect_irq_stats(ciostatus, dsi.irq_stats.cio_irqs);
+#endif
+
dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus);
/* flush posted write */
dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
/* flush posted write */
dsi_read_reg(DSI_IRQSTATUS);
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_unlock(&dsi.irq_stats_lock);
+#endif
}
/* PLL_PWR_STATUS */
while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) {
- udelay(1);
- if (t++ > 1000) {
+ if (++t > 1000) {
DSSERR("Failed to set DSI PLL power mode to %d\n",
state);
return -ENODEV;
}
+ udelay(1);
}
return 0;
enable_clocks(0);
}
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+void dsi_dump_irqs(struct seq_file *s)
+{
+ unsigned long flags;
+ struct dsi_irq_stats stats;
+
+ spin_lock_irqsave(&dsi.irq_stats_lock, flags);
+
+ stats = dsi.irq_stats;
+ memset(&dsi.irq_stats, 0, sizeof(dsi.irq_stats));
+ dsi.irq_stats.last_reset = jiffies;
+
+ spin_unlock_irqrestore(&dsi.irq_stats_lock, flags);
+
+ seq_printf(s, "period %u ms\n",
+ jiffies_to_msecs(jiffies - stats.last_reset));
+
+ seq_printf(s, "irqs %d\n", stats.irq_count);
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]);
+
+ seq_printf(s, "-- DSI interrupts --\n");
+ PIS(VC0);
+ PIS(VC1);
+ PIS(VC2);
+ PIS(VC3);
+ PIS(WAKEUP);
+ PIS(RESYNC);
+ PIS(PLL_LOCK);
+ PIS(PLL_UNLOCK);
+ PIS(PLL_RECALL);
+ PIS(COMPLEXIO_ERR);
+ PIS(HS_TX_TIMEOUT);
+ PIS(LP_RX_TIMEOUT);
+ PIS(TE_TRIGGER);
+ PIS(ACK_TRIGGER);
+ PIS(SYNC_LOST);
+ PIS(LDO_POWER_GOOD);
+ PIS(TA_TIMEOUT);
+#undef PIS
+
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \
+ stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \
+ stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \
+ stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \
+ stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]);
+
+ seq_printf(s, "-- VC interrupts --\n");
+ PIS(CS);
+ PIS(ECC_CORR);
+ PIS(PACKET_SENT);
+ PIS(FIFO_TX_OVF);
+ PIS(FIFO_RX_OVF);
+ PIS(BTA);
+ PIS(ECC_NO_CORR);
+ PIS(FIFO_TX_UDF);
+ PIS(PP_BUSY_CHANGE);
+#undef PIS
+
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d\n", #x, \
+ stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]);
+
+ seq_printf(s, "-- CIO interrupts --\n");
+ PIS(ERRSYNCESC1);
+ PIS(ERRSYNCESC2);
+ PIS(ERRSYNCESC3);
+ PIS(ERRESC1);
+ PIS(ERRESC2);
+ PIS(ERRESC3);
+ PIS(ERRCONTROL1);
+ PIS(ERRCONTROL2);
+ PIS(ERRCONTROL3);
+ PIS(STATEULPS1);
+ PIS(STATEULPS2);
+ PIS(STATEULPS3);
+ PIS(ERRCONTENTIONLP0_1);
+ PIS(ERRCONTENTIONLP1_1);
+ PIS(ERRCONTENTIONLP0_2);
+ PIS(ERRCONTENTIONLP1_2);
+ PIS(ERRCONTENTIONLP0_3);
+ PIS(ERRCONTENTIONLP1_3);
+ PIS(ULPSACTIVENOT_ALL0);
+ PIS(ULPSACTIVENOT_ALL1);
+#undef PIS
+}
+#endif
+
void dsi_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r))
/* PWR_STATUS */
while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) {
- udelay(1);
- if (t++ > 1000) {
+ if (++t > 1000) {
DSSERR("failed to set complexio power state to "
"%d\n", state);
return -ENODEV;
}
+ udelay(1);
}
return 0;
static int _dsi_wait_reset(void)
{
- int i = 0;
+ int t = 0;
while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) {
- if (i++ > 5) {
+ if (++t > 5) {
DSSERR("soft reset failed\n");
return -ENODEV;
}
return -EINVAL;
}
- data_id = data_type | channel << 6;
+ data_id = data_type | dsi.vc[channel].dest_per << 6;
r = (data_id << 0) | (data << 8) | (ecc << 24);
int dsi_vc_send_null(int channel)
{
u8 nullpkg[] = {0, 0, 0, 0};
- return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0);
+ return dsi_vc_send_long(channel, DSI_DT_NULL_PACKET, nullpkg, 4, 0);
}
EXPORT_SYMBOL(dsi_vc_send_null);
int r;
if (dsi.debug_read)
- DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd);
+ DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd);
r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
if (r)
/* using fifo not empty */
/* TX_FIFO_NOT_EMPTY */
while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) {
- udelay(1);
fifo_stalls++;
if (fifo_stalls > 0xfffff) {
DSSERR("fifo stalls overflow, pixels left %d\n",
dsi_if_enable(0);
return -EIO;
}
+ udelay(1);
}
#elif 1
/* using fifo emptiness */
static int dsi_set_te(struct omap_dss_device *dssdev, bool enable)
{
- int r;
- r = dssdev->driver->enable_te(dssdev, enable);
- /* XXX for some reason, DSI TE breaks if we don't wait here.
- * Panel bug? Needs more studying */
- msleep(100);
+ int r = 0;
+
+ if (dssdev->driver->enable_te) {
+ r = dssdev->driver->enable_te(dssdev, enable);
+ /* XXX for some reason, DSI TE breaks if we don't wait here.
+ * Panel bug? Needs more studying */
+ msleep(100);
+ }
+
return r;
}
spin_lock_init(&dsi.errors_lock);
dsi.errors = 0;
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock_init(&dsi.irq_stats_lock);
+ dsi.irq_stats.last_reset = jiffies;
+#endif
+
init_completion(&dsi.bta_completion);
init_completion(&dsi.update_completion);
static int _omap_dss_wait_reset(void)
{
- unsigned timeout = 1000;
+ int t = 0;
while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) {
- udelay(1);
- if (!--timeout) {
+ if (++t > 1000) {
DSSERR("soft reset failed\n");
return -ENODEV;
}
+ udelay(1);
}
return 0;
void dsi_exit(void);
void dsi_dump_clocks(struct seq_file *s);
+void dsi_dump_irqs(struct seq_file *s);
void dsi_dump_regs(struct seq_file *s);
void dsi_save_context(void);
int dispc_init(void);
void dispc_exit(void);
void dispc_dump_clocks(struct seq_file *s);
+void dispc_dump_irqs(struct seq_file *s);
void dispc_dump_regs(struct seq_file *s);
void dispc_irq_handler(void);
void dispc_fake_vsync_irq(void);
unsigned long rfbi_get_max_tx_rate(void);
int rfbi_init_display(struct omap_dss_device *display);
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+static inline void dss_collect_irq_stats(u32 irqstatus, unsigned *irq_arr)
+{
+ int b;
+ for (b = 0; b < 32; ++b) {
+ if (irqstatus & (1 << b))
+ irq_arr[b]++;
+ }
+}
+#endif
+
#endif
struct omap_dss_device *dssdev[2];
- struct kfifo *cmd_fifo;
+ struct kfifo cmd_fifo;
spinlock_t cmd_lock;
struct completion cmd_done;
atomic_t cmd_fifo_full;
return;
while (true) {
- spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+ spin_lock_irqsave(&rfbi.cmd_lock, flags);
- len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p,
+ len = kfifo_out(&rfbi.cmd_fifo, (unsigned char *)&p,
sizeof(struct update_param));
if (len == 0) {
DSSDBG("nothing more in fifo\n");
atomic_set(&rfbi.cmd_pending, 0);
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
break;
}
/* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
BUG_ON(len != sizeof(struct update_param));
BUG_ON(p.rfbi_module > 1);
unsigned long flags;
int available;
- spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+ spin_lock_irqsave(&rfbi.cmd_lock, flags);
available = RFBI_CMD_FIFO_LEN_BYTES -
- __kfifo_len(rfbi.cmd_fifo);
+ kfifo_len(&rfbi.cmd_fifo);
/* DSSDBG("%d bytes left in fifo\n", available); */
if (available < sizeof(struct update_param)) {
DSSDBG("Going to wait because FIFO FULL..\n");
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
atomic_inc(&rfbi.cmd_fifo_full);
wait_for_completion(&rfbi.cmd_done);
/*DSSDBG("Woke up because fifo not full anymore\n");*/
continue;
}
- ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p,
+ ret = kfifo_in(&rfbi.cmd_fifo, (unsigned char *)p,
sizeof(struct update_param));
/* DSSDBG("pushed %d bytes\n", ret);*/
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
BUG_ON(ret != sizeof(struct update_param));
{
u32 rev;
u32 l;
+ int r;
spin_lock_init(&rfbi.cmd_lock);
- rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL,
- &rfbi.cmd_lock);
- if (IS_ERR(rfbi.cmd_fifo))
- return -ENOMEM;
+ r = kfifo_alloc(&rfbi.cmd_fifo, RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL);
+ if (r)
+ return r;
init_completion(&rfbi.cmd_done);
atomic_set(&rfbi.cmd_fifo_full, 0);
{
DSSDBG("rfbi_exit\n");
- kfifo_free(rfbi.cmd_fifo);
+ kfifo_free(&rfbi.cmd_fifo);
iounmap(rfbi.base);
}
if (rg->vrfb.vaddr[0]) {
iounmap(rg->vrfb.vaddr[0]);
omap_vrfb_release_ctx(&rg->vrfb);
+ rg->vrfb.vaddr[0] = NULL;
}
}
dssdev = NULL;
for_each_dss_dev(dssdev) {
omap_dss_get_device(dssdev);
+ if (!dssdev->driver) {
+ dev_err(&pdev->dev, "no driver for display\n");
+ r = -EINVAL;
+ goto cleanup;
+ }
fbdev->displays[fbdev->num_displays++] = dssdev;
}
static int pxafb_smart_thread(void *arg)
{
struct pxafb_info *fbi = arg;
- struct pxafb_mach_info *inf;
+ struct pxafb_mach_info *inf = fbi->dev->platform_data;
- if (!fbi || !fbi->dev->platform_data->smart_update) {
+ if (!inf->smart_update) {
pr_err("%s: not properly initialized, thread terminated\n",
__func__);
return -EINVAL;
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
- * @id: window id.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
-static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
{
- struct s3c_fb_pd_win *win = sfb->pdata->win[id];
unsigned long clk = clk_get_rate(sfb->bus_clk);
+ unsigned long long tmp;
unsigned int result;
- pixclk *= win->win_mode.refresh;
- result = clk / pixclk;
+ tmp = (unsigned long long)clk;
+ tmp *= pixclk;
+
+ do_div(tmp, 1000000000UL);
+ result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, clk / result);
/* use window 0 as the basis for the lcd output timings */
if (win_no == 0) {
- clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
+ clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
tmp, dst_pitch);
return -EINVAL;
}
- tmp = (tmp >> 3) | (dst_pitch << (16 - 3));
+ tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3));
writel(tmp, engine + 0x38);
if (op == VIA_BITBLT_FILL)
viapar->shared->vq_vram_addr = viapar->fbmem_free;
viapar->fbmem_used += VQ_SIZE;
+ /* Init 2D engine reg to reset 2D engine */
+ writel(0x0, engine + VIA_REG_KEYCONTROL);
+
/* Init AGP and VQ regs */
switch (chip_name) {
case UNICHROME_K8M890:
}
if (vmode_index != VIA_RES_INVALID) {
- viafb_setmode(vmode_index, info->var.xres, info->var.yres,
- info->var.bits_per_pixel, vmode_index1,
- viafb_second_xres, viafb_second_yres, viafb_bpp1);
-
viafb_update_fix(info);
viafb_bpp = info->var.bits_per_pixel;
if (info->var.accel_flags & FB_ACCELF_TEXT)
info->flags &= ~FBINFO_HWACCEL_DISABLED;
else
info->flags |= FBINFO_HWACCEL_DISABLED;
+ viafb_setmode(vmode_index, info->var.xres, info->var.yres,
+ info->var.bits_per_pixel, vmode_index1,
+ viafb_second_xres, viafb_second_yres, viafb_bpp1);
}
return 0;
if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo)
return -ENODEV;
- if (chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2)
+ /* LCD ouput does not support hw cursors (at least on VN896) */
+ if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) ||
+ viafb_LCD_ON)
return -ENODEV;
viafb_show_hw_cursor(info, HW_Cursor_OFF);
static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
-static struct virtio_driver virtio_balloon = {
+static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
static int __init init(void)
{
- return register_virtio_driver(&virtio_balloon);
+ return register_virtio_driver(&virtio_balloon_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_balloon);
+ unregister_virtio_driver(&virtio_balloon_driver);
}
module_init(init);
module_exit(fini);
tristate "Compulab SBC-FITPC2 watchdog"
depends on X86
---help---
- This is the driver for the built-in watchdog timer on the fit-PC2
- Single-board computer made by Compulab.
+ This is the driver for the built-in watchdog timer on the fit-PC2,
+ fit-PC2i, CM-iAM single-board computers made by Compulab.
It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
* document number 313056-003, 313057-017: 82801H (ICH8)
* document number 316972-004, 316973-012: 82801I (ICH9)
* document number 319973-002, 319974-002: 82801J (ICH10)
- * document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH)
+ * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
+ * document number TBD : Cougar Point (CPT)
*/
/*
TCO_ICH10DO, /* ICH10DO */
TCO_PCH, /* PCH Desktop Full Featured */
TCO_PCHM, /* PCH Mobile Full Featured */
+ TCO_P55, /* P55 */
+ TCO_PM55, /* PM55 */
+ TCO_H55, /* H55 */
+ TCO_QM57, /* QM57 */
+ TCO_H57, /* H57 */
+ TCO_HM55, /* HM55 */
+ TCO_Q57, /* Q57 */
+ TCO_HM57, /* HM57 */
TCO_PCHMSFF, /* PCH Mobile SFF Full Featured */
+ TCO_QS57, /* QS57 */
+ TCO_3400, /* 3400 */
+ TCO_3420, /* 3420 */
+ TCO_3450, /* 3450 */
TCO_EP80579, /* EP80579 */
+ TCO_CPTD, /* CPT Desktop */
+ TCO_CPTM, /* CPT Mobile */
};
static struct {
{"ICH10DO", 2},
{"PCH Desktop Full Featured", 2},
{"PCH Mobile Full Featured", 2},
+ {"P55", 2},
+ {"PM55", 2},
+ {"H55", 2},
+ {"QM57", 2},
+ {"H57", 2},
+ {"HM55", 2},
+ {"Q57", 2},
+ {"HM57", 2},
{"PCH Mobile SFF Full Featured", 2},
+ {"QS57", 2},
+ {"3400", 2},
+ {"3420", 2},
+ {"3450", 2},
{"EP80579", 2},
+ {"CPT Desktop", 2},
+ {"CPT Mobile", 2},
{NULL, 0}
};
{ ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)},
{ ITCO_PCI_DEVICE(0x3b00, TCO_PCH)},
{ ITCO_PCI_DEVICE(0x3b01, TCO_PCHM)},
+ { ITCO_PCI_DEVICE(0x3b02, TCO_P55)},
+ { ITCO_PCI_DEVICE(0x3b03, TCO_PM55)},
+ { ITCO_PCI_DEVICE(0x3b06, TCO_H55)},
+ { ITCO_PCI_DEVICE(0x3b07, TCO_QM57)},
+ { ITCO_PCI_DEVICE(0x3b08, TCO_H57)},
+ { ITCO_PCI_DEVICE(0x3b09, TCO_HM55)},
+ { ITCO_PCI_DEVICE(0x3b0a, TCO_Q57)},
+ { ITCO_PCI_DEVICE(0x3b0b, TCO_HM57)},
{ ITCO_PCI_DEVICE(0x3b0d, TCO_PCHMSFF)},
+ { ITCO_PCI_DEVICE(0x3b0f, TCO_QS57)},
+ { ITCO_PCI_DEVICE(0x3b12, TCO_3400)},
+ { ITCO_PCI_DEVICE(0x3b14, TCO_3420)},
+ { ITCO_PCI_DEVICE(0x3b16, TCO_3450)},
{ ITCO_PCI_DEVICE(0x5031, TCO_EP80579)},
+ { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)},
+ { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
+#include <linux/timer.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
static void wdt_send_data(unsigned char command, unsigned char data)
{
outb(command, COMMAND_PORT);
- mdelay(100);
+ msleep(100);
outb(data, DATA_PORT);
- mdelay(200);
+ msleep(200);
}
static void wdt_enable(void)
{
int err;
- if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) {
- pr_info("board name is: %s. Should be SBC-FITPC2\n",
- dmi_get_system_info(DMI_BOARD_NAME));
+ if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2"))
return -ENODEV;
- }
+
+ pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME));
if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
goto out_thaw;
}
+ printk(KERN_DEBUG "suspending xenstore...\n");
+ xs_suspend();
+
err = dpm_suspend_noirq(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
goto out_resume;
}
- printk(KERN_DEBUG "suspending xenstore...\n");
- xs_suspend();
-
err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
dpm_resume_noirq(PMSG_RESUME);
cancelled = 1;
}
+out_resume:
if (!cancelled) {
xen_arch_resume();
xs_resume();
} else
xs_suspend_cancel();
-out_resume:
dpm_resume_end(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
cis/DP83903.cis cis/NE2K.cis \
- cis/tamarack.cis cis/PE-200.cis
+ cis/tamarack.cis cis/PE-200.cis \
+ cis/PE520.cis
fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
cis/NE2K.cis
cis/tamarack.cis
cis/PE-200.cis
+ cis/PE520.cis
Licence: GPL
--- /dev/null
+:1000000001030000FF152304014B544900504535FE
+:10001000323020504C55530050434D434941204508
+:10002000746865726E65740000FF20046101100041
+:10003000210206001A050101D00F0B1B09C101198D
+:0A00400001556530FFFF1400FF00BA
+:00000001FF
+#
+# Replacement CIS for PE520 ethernet card
+#
return retval;
}
-/**
- * v9fs_vfs_readlink - read a symlink's location
- * @dentry: dentry for symlink
- * @buffer: buffer to load symlink location into
- * @buflen: length of buffer
- *
- */
-
-static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
- int buflen)
-{
- int retval;
- int ret;
- char *link = __getname();
-
- if (unlikely(!link))
- return -ENOMEM;
-
- if (buflen > PATH_MAX)
- buflen = PATH_MAX;
-
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
- dentry);
-
- retval = v9fs_readlink(dentry, link, buflen);
-
- if (retval > 0) {
- if ((ret = copy_to_user(buffer, link, retval)) != 0) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "problem copying to user: %d\n", ret);
- retval = ret;
- }
- }
-
- __putname(link);
- return retval;
-}
-
/**
* v9fs_vfs_follow_link - follow a symlink path
* @dentry: dentry for symlink
.rmdir = v9fs_vfs_rmdir,
.mknod = v9fs_vfs_mknod,
.rename = v9fs_vfs_rename,
- .readlink = v9fs_vfs_readlink,
.getattr = v9fs_vfs_getattr,
.setattr = v9fs_vfs_setattr,
};
};
static const struct inode_operations v9fs_symlink_inode_operations = {
- .readlink = v9fs_vfs_readlink,
+ .readlink = generic_readlink,
.follow_link = v9fs_vfs_follow_link,
.put_link = v9fs_vfs_put_link,
.getattr = v9fs_vfs_getattr,
P9_DPRINTK(P9_DEBUG_VFS, " %p\n", s);
- v9fs_dentry_release(s->s_root); /* clunk root */
+ if (s->s_root)
+ v9fs_dentry_release(s->s_root); /* clunk root */
kill_anon_super(s);
u32 s_last_bmap;
struct buffer_head *s_bmap_bh;
char *s_prefix; /* Prefix for volumes and assigns. */
- int s_prefix_len; /* Length of prefix. */
char s_volume[32]; /* Volume prefix for absolute symlinks. */
+ spinlock_t symlink_lock; /* protects the previous two */
};
#define SF_INTL 0x0001 /* International filesystem. */
p = (char *)AFFS_HEAD(bh)->table;
lc = '/';
if (*symname == '/') {
+ struct affs_sb_info *sbi = AFFS_SB(sb);
while (*symname == '/')
symname++;
- while (AFFS_SB(sb)->s_volume[i]) /* Cannot overflow */
- *p++ = AFFS_SB(sb)->s_volume[i++];
+ spin_lock(&sbi->symlink_lock);
+ while (sbi->s_volume[i]) /* Cannot overflow */
+ *p++ = sbi->s_volume[i++];
+ spin_unlock(&sbi->symlink_lock);
}
while (i < maxlen && (c = *symname++)) {
if (c == '.' && lc == '/' && *symname == '.' && symname[1] == '/') {
switch (token) {
case Opt_bs:
if (match_int(&args[0], &n))
- return -EINVAL;
+ return 0;
if (n != 512 && n != 1024 && n != 2048
&& n != 4096) {
printk ("AFFS: Invalid blocksize (512, 1024, 2048, 4096 allowed)\n");
break;
case Opt_mode:
if (match_octal(&args[0], &option))
- return 1;
+ return 0;
*mode = option & 0777;
*mount_opts |= SF_SETMODE;
break;
*mount_opts |= SF_MUFS;
break;
case Opt_prefix:
- /* Free any previous prefix */
- kfree(*prefix);
*prefix = match_strdup(&args[0]);
if (!*prefix)
return 0;
break;
case Opt_reserved:
if (match_int(&args[0], reserved))
- return 1;
+ return 0;
break;
case Opt_root:
if (match_int(&args[0], root))
- return 1;
+ return 0;
break;
case Opt_setgid:
if (match_int(&args[0], &option))
- return 1;
+ return 0;
*gid = option;
*mount_opts |= SF_SETGID;
break;
case Opt_setuid:
if (match_int(&args[0], &option))
- return -EINVAL;
+ return 0;
*uid = option;
*mount_opts |= SF_SETUID;
break;
return -ENOMEM;
sb->s_fs_info = sbi;
mutex_init(&sbi->s_bmlock);
+ spin_lock_init(&sbi->symlink_lock);
if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
&blocksize,&sbi->s_prefix,
sbi->s_volume, &mount_flags)) {
printk(KERN_ERR "AFFS: Error parsing options\n");
+ kfree(sbi->s_prefix);
+ kfree(sbi);
return -EINVAL;
}
/* N.B. after this point s_prefix must be released */
unsigned long mount_flags;
int res = 0;
char *new_opts = kstrdup(data, GFP_KERNEL);
+ char volume[32];
+ char *prefix = NULL;
pr_debug("AFFS: remount(flags=0x%x,opts=\"%s\")\n",*flags,data);
*flags |= MS_NODIRATIME;
+ memcpy(volume, sbi->s_volume, 32);
if (!parse_options(data, &uid, &gid, &mode, &reserved, &root_block,
- &blocksize, &sbi->s_prefix, sbi->s_volume,
+ &blocksize, &prefix, volume,
&mount_flags)) {
+ kfree(prefix);
kfree(new_opts);
return -EINVAL;
}
sbi->s_mode = mode;
sbi->s_uid = uid;
sbi->s_gid = gid;
+ /* protect against readers */
+ spin_lock(&sbi->symlink_lock);
+ if (prefix) {
+ kfree(sbi->s_prefix);
+ sbi->s_prefix = prefix;
+ }
+ memcpy(sbi->s_volume, volume, 32);
+ spin_unlock(&sbi->symlink_lock);
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
unlock_kernel();
int i, j;
char c;
char lc;
- char *pf;
pr_debug("AFFS: follow_link(ino=%lu)\n",inode->i_ino);
j = 0;
lf = (struct slink_front *)bh->b_data;
lc = 0;
- pf = AFFS_SB(inode->i_sb)->s_prefix ? AFFS_SB(inode->i_sb)->s_prefix : "/";
if (strchr(lf->symname,':')) { /* Handle assign or volume name */
+ struct affs_sb_info *sbi = AFFS_SB(inode->i_sb);
+ char *pf;
+ spin_lock(&sbi->symlink_lock);
+ pf = sbi->s_prefix ? sbi->s_prefix : "/";
while (i < 1023 && (c = pf[i]))
link[i++] = c;
+ spin_unlock(&sbi->symlink_lock);
while (i < 1023 && lf->symname[j] != ':')
link[i++] = lf->symname[j++];
if (i < 1023)
struct inode *inode;
unsigned i, imap_len;
struct bfs_sb_info *info;
- long ret = -EINVAL;
+ int ret = -EINVAL;
unsigned long i_sblock, i_eblock, i_eoff, s_size;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
+ mutex_init(&info->bfs_lock);
s->s_fs_info = info;
sb_set_blocksize(s, BFS_BSIZE);
- bh = sb_bread(s, 0);
- if(!bh)
+ info->si_sbh = sb_bread(s, 0);
+ if (!info->si_sbh)
goto out;
- bfs_sb = (struct bfs_super_block *)bh->b_data;
+ bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data;
if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) {
if (!silent)
printf("No BFS filesystem on %s (magic=%08x)\n",
s->s_id, le32_to_cpu(bfs_sb->s_magic));
- goto out;
+ goto out1;
}
if (BFS_UNCLEAN(bfs_sb, s) && !silent)
printf("%s is unclean, continuing\n", s->s_id);
s->s_magic = BFS_MAGIC;
- info->si_sbh = bh;
if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
printf("Superblock is corrupted\n");
- goto out;
+ goto out1;
}
info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE) /
imap_len = (info->si_lasti / 8) + 1;
info->si_imap = kzalloc(imap_len, GFP_KERNEL);
if (!info->si_imap)
- goto out;
+ goto out1;
for (i = 0; i < BFS_ROOT_INO; i++)
set_bit(i, info->si_imap);
inode = bfs_iget(s, BFS_ROOT_INO);
if (IS_ERR(inode)) {
ret = PTR_ERR(inode);
- kfree(info->si_imap);
- goto out;
+ goto out2;
}
s->s_root = d_alloc_root(inode);
if (!s->s_root) {
iput(inode);
ret = -ENOMEM;
- kfree(info->si_imap);
- goto out;
+ goto out2;
}
info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1) >> BFS_BSIZE_BITS;
bh = sb_bread(s, info->si_blocks - 1);
if (!bh) {
printf("Last block not available: %lu\n", info->si_blocks - 1);
- iput(inode);
ret = -EIO;
- kfree(info->si_imap);
- goto out;
+ goto out3;
}
brelse(bh);
printf("Inode 0x%08x corrupted\n", i);
brelse(bh);
- s->s_root = NULL;
- kfree(info->si_imap);
- kfree(info);
- s->s_fs_info = NULL;
- return -EIO;
+ ret = -EIO;
+ goto out3;
}
if (!di->i_ino) {
s->s_dirt = 1;
}
dump_imap("read_super", s);
- mutex_init(&info->bfs_lock);
return 0;
+out3:
+ dput(s->s_root);
+ s->s_root = NULL;
+out2:
+ kfree(info->si_imap);
+out1:
+ brelse(info->si_sbh);
out:
- brelse(bh);
+ mutex_destroy(&info->bfs_lock);
kfree(info);
s->s_fs_info = NULL;
return ret;
#else
set_personality(PER_LINUX);
#endif
+ setup_new_exec(bprm);
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
if (elf_interpreter[elf_ppnt->p_filesz - 1] != '\0')
goto out_free_interp;
- /*
- * The early SET_PERSONALITY here is so that the lookup
- * for the interpreter happens in the namespace of the
- * to-be-execed image. SET_PERSONALITY can select an
- * alternate root.
- *
- * However, SET_PERSONALITY is NOT allowed to switch
- * this task into the new images's memory mapping
- * policy - that is, TASK_SIZE must still evaluate to
- * that which is appropriate to the execing application.
- * This is because exit_mmap() needs to have TASK_SIZE
- * evaluate to the size of the old image.
- *
- * So if (say) a 64-bit application is execing a 32-bit
- * application it is the architecture's responsibility
- * to defer changing the value of TASK_SIZE until the
- * switch really is going to happen - do this in
- * flush_thread(). - akpm
- */
- SET_PERSONALITY(loc->elf_ex);
-
interpreter = open_exec(elf_interpreter);
retval = PTR_ERR(interpreter);
if (IS_ERR(interpreter))
/* Verify the interpreter has a valid arch */
if (!elf_check_arch(&loc->interp_elf_ex))
goto out_free_dentry;
- } else {
- /* Executables without an interpreter also need a personality */
- SET_PERSONALITY(loc->elf_ex);
}
/* Flush all traces of the currently running executable */
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
current->flags |= PF_RANDOMIZE;
- arch_pick_mmap_layout(current->mm);
+
+ setup_new_exec(bprm);
/* Do this so that we can load the interpreter, if need be. We will
change some of these later */
unsigned long stack_size, entryaddr;
#ifdef ELF_FDPIC_PLAT_INIT
unsigned long dynaddr;
+#endif
+#ifndef CONFIG_MMU
+ unsigned long stack_prot;
#endif
struct file *interpreter = NULL; /* to shut gcc up */
char *interpreter_name = NULL;
* defunct, deceased, etc. after this point we have to exit via
* error_kill */
set_personality(PER_LINUX_FDPIC);
+ if (elf_read_implies_exec(&exec_params.hdr, executable_stack))
+ current->personality |= READ_IMPLIES_EXEC;
+
+ setup_new_exec(bprm);
+
set_binfmt(&elf_fdpic_format);
current->mm->start_code = 0;
if (stack_size < PAGE_SIZE * 2)
stack_size = PAGE_SIZE * 2;
+ stack_prot = PROT_READ | PROT_WRITE;
+ if (executable_stack == EXSTACK_ENABLE_X ||
+ (executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC))
+ stack_prot |= PROT_EXEC;
+
down_write(¤t->mm->mmap_sem);
- current->mm->start_brk = do_mmap(NULL, 0, stack_size,
- PROT_READ | PROT_WRITE | PROT_EXEC,
+ current->mm->start_brk = do_mmap(NULL, 0, stack_size, stack_prot,
MAP_PRIVATE | MAP_ANONYMOUS |
MAP_UNINITIALIZED | MAP_GROWSDOWN,
0);
ELF_CORE_WRITE_EXTRA_DATA;
#endif
- if (file->f_pos != offset) {
+ if (cprm->file->f_pos != offset) {
/* Sanity check */
printk(KERN_WARNING
"elf_core_dump: file->f_pos (%lld) != offset (%lld)\n",
- file->f_pos, offset);
+ cprm->file->f_pos, offset);
}
end_coredump:
/* OK, This is the point of no return */
set_personality(PER_LINUX_32BIT);
+ setup_new_exec(bprm);
}
/*
/* OK, This is the point of no return */
current->flags &= ~PF_FORKNOEXEC;
current->personality = PER_HPUX;
+ setup_new_exec(bprm);
/* Set the task size for HP-UX processes such that
* the gateway page is outside the address space.
i = 0;
while (i < bio_slab_nr) {
- struct bio_slab *bslab = &bio_slabs[i];
+ bslab = &bio_slabs[i];
if (!bslab->slab && entry == -1)
entry = i;
switch (type) {
case ACL_TYPE_ACCESS:
mode = inode->i_mode;
- ret = posix_acl_equiv_mode(acl, &mode);
- if (ret < 0)
- return ret;
- ret = 0;
- inode->i_mode = mode;
name = POSIX_ACL_XATTR_ACCESS;
+ if (acl) {
+ ret = posix_acl_equiv_mode(acl, &mode);
+ if (ret < 0)
+ return ret;
+ inode->i_mode = mode;
+ }
+ ret = 0;
break;
case ACL_TYPE_DEFAULT:
if (!S_ISDIR(inode->i_mode))
ACL_TYPE_ACCESS);
}
}
+ posix_acl_release(clone);
}
failed:
posix_acl_release(acl);
#define BTRFS_MOUNT_SSD_SPREAD (1 << 8)
#define BTRFS_MOUNT_NOSSD (1 << 9)
#define BTRFS_MOUNT_DISCARD (1 << 10)
+#define BTRFS_MOUNT_FORCE_COMPRESS (1 << 11)
#define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt)
#define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt)
if (!fs_info->fs_root)
goto fail_trans_kthread;
+ if (!(sb->s_flags & MS_RDONLY)) {
+ down_read(&fs_info->cleanup_work_sem);
+ btrfs_orphan_cleanup(fs_info->fs_root);
+ up_read(&fs_info->cleanup_work_sem);
+ }
+
return tree_root;
fail_trans_kthread:
return (cache->flags & bits) == bits;
}
+void btrfs_get_block_group(struct btrfs_block_group_cache *cache)
+{
+ atomic_inc(&cache->count);
+}
+
+void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
+{
+ if (atomic_dec_and_test(&cache->count))
+ kfree(cache);
+}
+
/*
* this adds the block group to the fs_info rb tree for the block group
* cache
}
}
if (ret)
- atomic_inc(&ret->count);
+ btrfs_get_block_group(ret);
spin_unlock(&info->block_group_cache_lock);
return ret;
put_caching_control(caching_ctl);
atomic_dec(&block_group->space_info->caching_threads);
+ btrfs_put_block_group(block_group);
+
return 0;
}
up_write(&fs_info->extent_commit_sem);
atomic_inc(&cache->space_info->caching_threads);
+ btrfs_get_block_group(cache);
tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
cache->key.objectid);
return cache;
}
-void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
-{
- if (atomic_dec_and_test(&cache->count))
- kfree(cache);
-}
-
static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info,
u64 flags)
{
if (node) {
cache = rb_entry(node, struct btrfs_block_group_cache,
cache_node);
- atomic_inc(&cache->count);
+ btrfs_get_block_group(cache);
} else
cache = NULL;
spin_unlock(&root->fs_info->block_group_cache_lock);
u64 offset;
int cached;
- atomic_inc(&block_group->count);
+ btrfs_get_block_group(block_group);
search_start = block_group->key.objectid;
have_block_group:
btrfs_put_block_group(block_group);
block_group = last_ptr->block_group;
- atomic_inc(&block_group->count);
+ btrfs_get_block_group(block_group);
spin_unlock(&last_ptr->lock);
spin_unlock(&last_ptr->refill_lock);
wait_block_group_cache_done(block_group);
btrfs_remove_free_space_cache(block_group);
-
- WARN_ON(atomic_read(&block_group->count) != 1);
- kfree(block_group);
+ btrfs_put_block_group(block_group);
spin_lock(&info->block_group_cache_lock);
}
return NULL;
}
-/*
- * look for an offset in the tree, and if it can't be found, return
- * the first offset we can find smaller than 'offset'.
- */
-static inline struct rb_node *tree_search(struct rb_root *root, u64 offset)
-{
- struct rb_node *prev;
- struct rb_node *ret;
- ret = __tree_search(root, offset, &prev, NULL);
- if (!ret)
- return prev;
- return ret;
-}
-
/* check to see if two extent_map structs are adjacent and safe to merge */
static int mergable_maps(struct extent_map *prev, struct extent_map *next)
{
}
static int extent_mergeable(struct extent_buffer *leaf, int slot,
- u64 objectid, u64 bytenr, u64 *start, u64 *end)
+ u64 objectid, u64 bytenr, u64 orig_offset,
+ u64 *start, u64 *end)
{
struct btrfs_file_extent_item *fi;
struct btrfs_key key;
fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG ||
btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr ||
+ btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset ||
btrfs_file_extent_compression(leaf, fi) ||
btrfs_file_extent_encryption(leaf, fi) ||
btrfs_file_extent_other_encoding(leaf, fi))
u64 split;
int del_nr = 0;
int del_slot = 0;
+ int recow;
int ret;
btrfs_drop_extent_cache(inode, start, end - 1, 0);
path = btrfs_alloc_path();
BUG_ON(!path);
again:
+ recow = 0;
split = start;
key.objectid = inode->i_ino;
key.type = BTRFS_EXTENT_DATA_KEY;
bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi);
+ memcpy(&new_key, &key, sizeof(new_key));
+
+ if (start == key.offset && end < extent_end) {
+ other_start = 0;
+ other_end = start;
+ if (extent_mergeable(leaf, path->slots[0] - 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ new_key.offset = end;
+ btrfs_set_item_key_safe(trans, root, path, &new_key);
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ extent_end - end);
+ btrfs_set_file_extent_offset(leaf, fi,
+ end - orig_offset);
+ fi = btrfs_item_ptr(leaf, path->slots[0] - 1,
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ end - other_start);
+ btrfs_mark_buffer_dirty(leaf);
+ goto out;
+ }
+ }
+
+ if (start > key.offset && end == extent_end) {
+ other_start = end;
+ other_end = 0;
+ if (extent_mergeable(leaf, path->slots[0] + 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ start - key.offset);
+ path->slots[0]++;
+ new_key.offset = start;
+ btrfs_set_item_key_safe(trans, root, path, &new_key);
+
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ other_end - start);
+ btrfs_set_file_extent_offset(leaf, fi,
+ start - orig_offset);
+ btrfs_mark_buffer_dirty(leaf);
+ goto out;
+ }
+ }
while (start > key.offset || end < extent_end) {
if (key.offset == start)
split = end;
- memcpy(&new_key, &key, sizeof(new_key));
new_key.offset = split;
ret = btrfs_duplicate_item(trans, root, path, &new_key);
if (ret == -EAGAIN) {
path->slots[0]--;
extent_end = end;
}
+ recow = 1;
}
- fi = btrfs_item_ptr(leaf, path->slots[0],
- struct btrfs_file_extent_item);
-
other_start = end;
other_end = 0;
- if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino,
- bytenr, &other_start, &other_end)) {
+ if (extent_mergeable(leaf, path->slots[0] + 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ if (recow) {
+ btrfs_release_path(root, path);
+ goto again;
+ }
extent_end = other_end;
del_slot = path->slots[0] + 1;
del_nr++;
}
other_start = 0;
other_end = start;
- if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino,
- bytenr, &other_start, &other_end)) {
+ if (extent_mergeable(leaf, path->slots[0] - 1,
+ inode->i_ino, bytenr, orig_offset,
+ &other_start, &other_end)) {
+ if (recow) {
+ btrfs_release_path(root, path);
+ goto again;
+ }
key.offset = other_start;
del_slot = path->slots[0];
del_nr++;
inode->i_ino, orig_offset);
BUG_ON(ret);
}
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
if (del_nr == 0) {
btrfs_set_file_extent_type(leaf, fi,
BTRFS_FILE_EXTENT_REG);
btrfs_mark_buffer_dirty(leaf);
- goto out;
- }
-
- fi = btrfs_item_ptr(leaf, del_slot - 1,
- struct btrfs_file_extent_item);
- btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG);
- btrfs_set_file_extent_num_bytes(leaf, fi,
- extent_end - key.offset);
- btrfs_mark_buffer_dirty(leaf);
+ } else {
+ btrfs_set_file_extent_type(leaf, fi,
+ BTRFS_FILE_EXTENT_REG);
+ btrfs_set_file_extent_num_bytes(leaf, fi,
+ extent_end - key.offset);
+ btrfs_mark_buffer_dirty(leaf);
- ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
- BUG_ON(ret);
+ ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
+ BUG_ON(ret);
+ }
out:
btrfs_free_path(path);
return 0;
nr_pages_ret = 0;
/* flag the file so we don't compress in the future */
- BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
+ if (!btrfs_test_opt(root, FORCE_COMPRESS))
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
}
if (will_compress) {
*num_added += 1;
/* Reached end of directory/root. Bump pos past the last item. */
if (key_type == BTRFS_DIR_INDEX_KEY)
- filp->f_pos = INT_LIMIT(off_t);
+ /*
+ * 32-bit glibc will use getdents64, but then strtol -
+ * so the last number we can serve is this.
+ */
+ filp->f_pos = 0x7fffffff;
else
filp->f_pos++;
nopos:
}
static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
- u64 alloc_hint, int mode)
+ u64 alloc_hint, int mode, loff_t actual_len)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 cur_offset = start;
u64 num_bytes = end - start;
int ret = 0;
+ u64 i_size;
while (num_bytes > 0) {
alloc_size = min(num_bytes, root->fs_info->max_extent);
BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
cur_offset > inode->i_size) {
- i_size_write(inode, cur_offset);
- btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+ if (cur_offset > actual_len)
+ i_size = actual_len;
+ else
+ i_size = cur_offset;
+ i_size_write(inode, i_size);
+ btrfs_ordered_update_i_size(inode, i_size, NULL);
}
ret = btrfs_update_inode(trans, root, inode);
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
ret = prealloc_file_range(inode,
cur_offset, last_byte,
- alloc_hint, mode);
+ alloc_hint, mode, offset+len);
if (ret < 0) {
free_extent_map(em);
break;
if (ordered)
offset = entry_end(ordered);
+ else
+ offset = ALIGN(offset, BTRFS_I(inode)->root->sectorsize);
mutex_lock(&tree->mutex);
disk_i_size = BTRFS_I(inode)->disk_i_size;
return -ENOMEM;
path = btrfs_alloc_path();
- if (!path)
+ if (!path) {
+ kfree(cluster);
return -ENOMEM;
+ }
rc->extents_found = 0;
rc->extents_skipped = 0;
Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
- Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
+ Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio,
+ Opt_flushoncommit,
Opt_discard, Opt_err,
};
{Opt_alloc_start, "alloc_start=%s"},
{Opt_thread_pool, "thread_pool=%d"},
{Opt_compress, "compress"},
+ {Opt_compress_force, "compress-force"},
{Opt_ssd, "ssd"},
{Opt_ssd_spread, "ssd_spread"},
{Opt_nossd, "nossd"},
printk(KERN_INFO "btrfs: use compression\n");
btrfs_set_opt(info->mount_opt, COMPRESS);
break;
+ case Opt_compress_force:
+ printk(KERN_INFO "btrfs: forcing compression\n");
+ btrfs_set_opt(info->mount_opt, FORCE_COMPRESS);
+ btrfs_set_opt(info->mount_opt, COMPRESS);
+ break;
case Opt_ssd:
printk(KERN_INFO "btrfs: use ssd allocation scheme\n");
btrfs_set_opt(info->mount_opt, SSD);
root->fs_info->avail_metadata_alloc_bits;
if ((all_avail & BTRFS_BLOCK_GROUP_RAID10) &&
- root->fs_info->fs_devices->rw_devices <= 4) {
+ root->fs_info->fs_devices->num_devices <= 4) {
printk(KERN_ERR "btrfs: unable to go below four devices "
"on raid10\n");
ret = -EINVAL;
}
if ((all_avail & BTRFS_BLOCK_GROUP_RAID1) &&
- root->fs_info->fs_devices->rw_devices <= 2) {
+ root->fs_info->fs_devices->num_devices <= 2) {
printk(KERN_ERR "btrfs: unable to go below two "
"devices on raid1\n");
ret = -EINVAL;
return -EINVAL;
bdev = open_bdev_exclusive(device_path, 0, root->fs_info->bdev_holder);
- if (!bdev)
- return -EIO;
+ if (IS_ERR(bdev))
+ return PTR_ERR(bdev);
if (root->fs_info->fs_devices->seeding) {
seeding_dev = 1;
if (!em)
return 1;
+ if (btrfs_test_opt(root, DEGRADED)) {
+ free_extent_map(em);
+ return 0;
+ }
+
map = (struct map_lookup *)em->bdev;
for (i = 0; i < map->num_stripes; i++) {
if (!map->stripes[i].dev->writeable) {
em = lookup_extent_mapping(em_tree, logical, *length);
read_unlock(&em_tree->lock);
- if (!em && unplug_page)
+ if (!em && unplug_page) {
+ kfree(multi);
return 0;
+ }
if (!em) {
printk(KERN_CRIT "unable to find logical %llu len %llu\n",
mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session.
Disable use of server inode numbers when server only
partially supports them (e.g. for one server querying inode numbers on
-FindFirst fails but QPathInfo queries works).
+FindFirst fails but QPathInfo queries works). Fix oops with dfs in
+cifs_put_smb_ses. Fix mmap to work on directio mounts (needed
+for OpenOffice when on forcedirectio mount e.g.)
Version 1.60
-------------
int err;
mntget(newmnt);
- err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
+ err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags | MNT_SHRINKABLE, mntlist);
switch (err) {
case 0:
path_put(&nd->path);
if (IS_ERR(mnt))
goto out_err;
- nd->path.mnt->mnt_flags |= MNT_SHRINKABLE;
rc = add_mount_helper(mnt, nd, &cifs_dfs_automount_list);
out:
};
const struct file_operations cifs_file_direct_ops = {
- /* no mmap, no aio, no readv -
+ /* no aio, no readv -
BB reevaluate whether they can be done with directio, no cache */
.read = cifs_user_read,
.write = cifs_user_write,
.lock = cifs_lock,
.fsync = cifs_fsync,
.flush = cifs_flush,
+ .mmap = cifs_file_mmap,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
.unlocked_ioctl = cifs_ioctl,
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
char *mount_data_global, const char *devname)
{
- int rc = 0;
+ int rc;
int xid;
struct smb_vol *volume_info;
- struct cifsSesInfo *pSesInfo = NULL;
- struct cifsTconInfo *tcon = NULL;
- struct TCP_Server_Info *srvTcp = NULL;
+ struct cifsSesInfo *pSesInfo;
+ struct cifsTconInfo *tcon;
+ struct TCP_Server_Info *srvTcp;
char *full_path;
char *mount_data = mount_data_global;
#ifdef CONFIG_CIFS_DFS_UPCALL
int referral_walks_count = 0;
try_mount_again:
#endif
+ rc = 0;
+ tcon = NULL;
+ pSesInfo = NULL;
+ srvTcp = NULL;
full_path = NULL;
xid = GetXid();
cleanup_volume_info(&volume_info);
referral_walks_count++;
+ FreeXid(xid);
goto try_mount_again;
}
#else /* No DFS support, return error on mount */
COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
#endif
+/* Big V (don't complain on serial console) */
+IGNORE_IOCTL(VT_OPENQRY)
+IGNORE_IOCTL(VT_GETMODE)
/* Little p (/dev/rtc, /dev/envctrl, etc.) */
COMPATIBLE_IOCTL(RTC_AIE_ON)
COMPATIBLE_IOCTL(RTC_AIE_OFF)
ret = -ENOENT;
path_put(path);
}
- } else
+ } else {
ret = -EPERM;
+ path_put(path);
+ }
}
return ret;
* block. A pointer to that is in the struct vfsmount that we
* have around.
*/
- if (!parent) {
- if (debugfs_mount && debugfs_mount->mnt_sb) {
- parent = debugfs_mount->mnt_sb->s_root;
- }
- }
- if (!parent) {
- pr_debug("debugfs: Ah! can not find a parent!\n");
- return -EFAULT;
- }
+ if (!parent)
+ parent = debugfs_mount->mnt_sb->s_root;
*dentry = NULL;
mutex_lock(&parent->d_inode->i_mutex);
char *cipher_name, size_t *key_size)
{
char dummy_key[ECRYPTFS_MAX_KEY_BYTES];
- char *full_alg_name;
+ char *full_alg_name = NULL;
int rc;
*key_tfm = NULL;
if (rc)
goto out;
*key_tfm = crypto_alloc_blkcipher(full_alg_name, 0, CRYPTO_ALG_ASYNC);
- kfree(full_alg_name);
if (IS_ERR(*key_tfm)) {
rc = PTR_ERR(*key_tfm);
printk(KERN_ERR "Unable to allocate crypto cipher with name "
goto out;
}
out:
+ kfree(full_alg_name);
return rc;
}
struct dentry *ecryptfs_dentry = file->f_path.dentry;
/* Private value of ecryptfs_dentry allocated in
* ecryptfs_lookup() */
- struct dentry *lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
+ struct dentry *lower_dentry;
struct ecryptfs_file_info *file_info;
mount_crypt_stat = &ecryptfs_superblock_to_private(
| ECRYPTFS_ENCRYPTED);
}
mutex_unlock(&crypt_stat->cs_mutex);
- if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
- && !(file->f_flags & O_RDONLY)) {
- rc = -EPERM;
- printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
- "file must hence be opened RO\n", __func__);
- goto out;
- }
if (!ecryptfs_inode_to_private(inode)->lower_file) {
rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
if (rc) {
goto out;
}
}
+ if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
+ && !(file->f_flags & O_RDONLY)) {
+ rc = -EPERM;
+ printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
+ "file must hence be opened RO\n", __func__);
+ goto out;
+ }
ecryptfs_set_file_lower(
file, ecryptfs_inode_to_private(inode)->lower_file);
if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
const struct file_operations ecryptfs_dir_fops = {
.readdir = ecryptfs_readdir,
.ioctl = ecryptfs_ioctl,
- .mmap = generic_file_mmap,
.open = ecryptfs_open,
.flush = ecryptfs_flush,
.release = ecryptfs_release,
goto out;
}
rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry,
- ecryptfs_dir_inode->i_sb, 1);
+ ecryptfs_dir_inode->i_sb,
+ ECRYPTFS_INTERPOSE_FLAG_D_ADD);
if (rc) {
printk(KERN_ERR "%s: Error interposing; rc = [%d]\n",
__func__, rc);
unlock_dir(lower_dir_dentry);
dput(lower_new_dentry);
dput(lower_old_dentry);
- d_drop(lower_old_dentry);
- d_drop(new_dentry);
- d_drop(old_dentry);
return rc;
}
struct dentry *lower_new_dentry;
struct dentry *lower_old_dir_dentry;
struct dentry *lower_new_dir_dentry;
+ struct dentry *trap = NULL;
lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
dget(lower_new_dentry);
lower_old_dir_dentry = dget_parent(lower_old_dentry);
lower_new_dir_dentry = dget_parent(lower_new_dentry);
- lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
+ trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
+ /* source should not be ancestor of target */
+ if (trap == lower_old_dentry) {
+ rc = -EINVAL;
+ goto out_lock;
+ }
+ /* target should not be ancestor of source */
+ if (trap == lower_new_dentry) {
+ rc = -ENOTEMPTY;
+ goto out_lock;
+ }
rc = vfs_rename(lower_old_dir_dentry->d_inode, lower_old_dentry,
lower_new_dir_dentry->d_inode, lower_new_dentry);
if (rc)
/* Released in ecryptfs_put_link(); only release here on error */
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- rc = -ENOMEM;
+ buf = ERR_PTR(-ENOMEM);
goto out;
}
old_fs = get_fs();
set_fs(get_ds());
rc = dentry->d_inode->i_op->readlink(dentry, (char __user *)buf, len);
set_fs(old_fs);
- if (rc < 0)
- goto out_free;
- else
+ if (rc < 0) {
+ kfree(buf);
+ buf = ERR_PTR(rc);
+ } else
buf[rc] = '\0';
- rc = 0;
- nd_set_link(nd, buf);
- goto out;
-out_free:
- kfree(buf);
out:
- return ERR_PTR(rc);
+ nd_set_link(nd, buf);
+ return NULL;
}
static void
ecryptfs_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
{
- /* Free the char* */
- kfree(nd_get_link(nd));
+ char *buf = nd_get_link(nd);
+ if (!IS_ERR(buf)) {
+ /* Free the char* */
+ kfree(buf);
+ }
}
/**
}
/**
- * ecryptfs_truncate
+ * truncate_upper
* @dentry: The ecryptfs layer dentry
- * @new_length: The length to expand the file to
+ * @ia: Address of the ecryptfs inode's attributes
+ * @lower_ia: Address of the lower inode's attributes
*
* Function to handle truncations modifying the size of the file. Note
* that the file sizes are interpolated. When expanding, we are simply
- * writing strings of 0's out. When truncating, we need to modify the
- * underlying file size according to the page index interpolations.
+ * writing strings of 0's out. When truncating, we truncate the upper
+ * inode and update the lower_ia according to the page index
+ * interpolations. If ATTR_SIZE is set in lower_ia->ia_valid upon return,
+ * the caller must use lower_ia in a call to notify_change() to perform
+ * the truncation of the lower inode.
*
* Returns zero on success; non-zero otherwise
*/
-int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
+static int truncate_upper(struct dentry *dentry, struct iattr *ia,
+ struct iattr *lower_ia)
{
int rc = 0;
struct inode *inode = dentry->d_inode;
loff_t lower_size_before_truncate;
loff_t lower_size_after_truncate;
- if (unlikely((new_length == i_size)))
+ if (unlikely((ia->ia_size == i_size))) {
+ lower_ia->ia_valid &= ~ATTR_SIZE;
goto out;
+ }
crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
/* Set up a fake ecryptfs file, this is used to interface with
* the file in the underlying filesystem so that the
&fake_ecryptfs_file,
ecryptfs_inode_to_private(dentry->d_inode)->lower_file);
/* Switch on growing or shrinking file */
- if (new_length > i_size) {
+ if (ia->ia_size > i_size) {
char zero[] = { 0x00 };
+ lower_ia->ia_valid &= ~ATTR_SIZE;
/* Write a single 0 at the last position of the file;
* this triggers code that will fill in 0's throughout
* the intermediate portion of the previous end of the
* file and the new and of the file */
rc = ecryptfs_write(&fake_ecryptfs_file, zero,
- (new_length - 1), 1);
- } else { /* new_length < i_size_read(inode) */
- /* We're chopping off all the pages down do the page
- * in which new_length is located. Fill in the end of
- * that page from (new_length & ~PAGE_CACHE_MASK) to
+ (ia->ia_size - 1), 1);
+ } else { /* ia->ia_size < i_size_read(inode) */
+ /* We're chopping off all the pages down to the page
+ * in which ia->ia_size is located. Fill in the end of
+ * that page from (ia->ia_size & ~PAGE_CACHE_MASK) to
* PAGE_CACHE_SIZE with zeros. */
size_t num_zeros = (PAGE_CACHE_SIZE
- - (new_length & ~PAGE_CACHE_MASK));
+ - (ia->ia_size & ~PAGE_CACHE_MASK));
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = vmtruncate(inode, new_length);
+ rc = vmtruncate(inode, ia->ia_size);
if (rc)
goto out_free;
- rc = vmtruncate(lower_dentry->d_inode, new_length);
+ lower_ia->ia_size = ia->ia_size;
+ lower_ia->ia_valid |= ATTR_SIZE;
goto out_free;
}
if (num_zeros) {
goto out_free;
}
rc = ecryptfs_write(&fake_ecryptfs_file, zeros_virt,
- new_length, num_zeros);
+ ia->ia_size, num_zeros);
kfree(zeros_virt);
if (rc) {
printk(KERN_ERR "Error attempting to zero out "
goto out_free;
}
}
- vmtruncate(inode, new_length);
+ vmtruncate(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
lower_size_before_truncate =
upper_size_to_lower_size(crypt_stat, i_size);
lower_size_after_truncate =
- upper_size_to_lower_size(crypt_stat, new_length);
- if (lower_size_after_truncate < lower_size_before_truncate)
- vmtruncate(lower_dentry->d_inode,
- lower_size_after_truncate);
+ upper_size_to_lower_size(crypt_stat, ia->ia_size);
+ if (lower_size_after_truncate < lower_size_before_truncate) {
+ lower_ia->ia_size = lower_size_after_truncate;
+ lower_ia->ia_valid |= ATTR_SIZE;
+ } else
+ lower_ia->ia_valid &= ~ATTR_SIZE;
}
out_free:
if (ecryptfs_file_to_private(&fake_ecryptfs_file))
return rc;
}
+/**
+ * ecryptfs_truncate
+ * @dentry: The ecryptfs layer dentry
+ * @new_length: The length to expand the file to
+ *
+ * Simple function that handles the truncation of an eCryptfs inode and
+ * its corresponding lower inode.
+ *
+ * Returns zero on success; non-zero otherwise
+ */
+int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
+{
+ struct iattr ia = { .ia_valid = ATTR_SIZE, .ia_size = new_length };
+ struct iattr lower_ia = { .ia_valid = 0 };
+ int rc;
+
+ rc = truncate_upper(dentry, &ia, &lower_ia);
+ if (!rc && lower_ia.ia_valid & ATTR_SIZE) {
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+
+ mutex_lock(&lower_dentry->d_inode->i_mutex);
+ rc = notify_change(lower_dentry, &lower_ia);
+ mutex_unlock(&lower_dentry->d_inode->i_mutex);
+ }
+ return rc;
+}
+
static int
ecryptfs_permission(struct inode *inode, int mask)
{
{
int rc = 0;
struct dentry *lower_dentry;
+ struct iattr lower_ia;
struct inode *inode;
struct inode *lower_inode;
struct ecryptfs_crypt_stat *crypt_stat;
}
}
mutex_unlock(&crypt_stat->cs_mutex);
+ memcpy(&lower_ia, ia, sizeof(lower_ia));
+ if (ia->ia_valid & ATTR_FILE)
+ lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file);
if (ia->ia_valid & ATTR_SIZE) {
- ecryptfs_printk(KERN_DEBUG,
- "ia->ia_valid = [0x%x] ATTR_SIZE" " = [0x%x]\n",
- ia->ia_valid, ATTR_SIZE);
- rc = ecryptfs_truncate(dentry, ia->ia_size);
- /* ecryptfs_truncate handles resizing of the lower file */
- ia->ia_valid &= ~ATTR_SIZE;
- ecryptfs_printk(KERN_DEBUG, "ia->ia_valid = [%x]\n",
- ia->ia_valid);
+ rc = truncate_upper(dentry, ia, &lower_ia);
if (rc < 0)
goto out;
}
* mode change is for clearing setuid/setgid bits. Allow lower fs
* to interpret this in its own way.
*/
- if (ia->ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID))
- ia->ia_valid &= ~ATTR_MODE;
+ if (lower_ia.ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID))
+ lower_ia.ia_valid &= ~ATTR_MODE;
mutex_lock(&lower_dentry->d_inode->i_mutex);
- rc = notify_change(lower_dentry, ia);
+ rc = notify_change(lower_dentry, &lower_ia);
mutex_unlock(&lower_dentry->d_inode->i_mutex);
out:
fsstack_copy_attr_all(inode, lower_inode);
return rc;
}
+int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct kstat lower_stat;
+ int rc;
+
+ rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
+ ecryptfs_dentry_to_lower(dentry), &lower_stat);
+ if (!rc) {
+ generic_fillattr(dentry->d_inode, stat);
+ stat->blocks = lower_stat.blocks;
+ }
+ return rc;
+}
+
int
ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value,
size_t size, int flags)
const struct inode_operations ecryptfs_main_iops = {
.permission = ecryptfs_permission,
.setattr = ecryptfs_setattr,
+ .getattr = ecryptfs_getattr,
.setxattr = ecryptfs_setxattr,
.getxattr = ecryptfs_getxattr,
.listxattr = ecryptfs_listxattr,
* with as much information as it can before needing
* the lower filesystem.
* ecryptfs_read_super(): this accesses the lower filesystem and uses
- * ecryptfs_interpolate to perform most of the linking
- * ecryptfs_interpolate(): links the lower filesystem into ecryptfs
+ * ecryptfs_interpose to perform most of the linking
+ * ecryptfs_interpose(): links the lower filesystem into ecryptfs (inode.c)
*/
static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags,
const char *dev_name, void *raw_data,
return events;
}
-static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
- loff_t *ppos)
+static void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt)
+{
+ *cnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count;
+ ctx->count -= *cnt;
+}
+
+/**
+ * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
+ * @ctx: [in] Pointer to eventfd context.
+ * @wait: [in] Wait queue to be removed.
+ * @cnt: [out] Pointer to the 64bit conter value.
+ *
+ * Returns zero if successful, or the following error codes:
+ *
+ * -EAGAIN : The operation would have blocked.
+ *
+ * This is used to atomically remove a wait queue entry from the eventfd wait
+ * queue head, and read/reset the counter value.
+ */
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+ __u64 *cnt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctx->wqh.lock, flags);
+ eventfd_ctx_do_read(ctx, cnt);
+ __remove_wait_queue(&ctx->wqh, wait);
+ if (*cnt != 0 && waitqueue_active(&ctx->wqh))
+ wake_up_locked_poll(&ctx->wqh, POLLOUT);
+ spin_unlock_irqrestore(&ctx->wqh.lock, flags);
+
+ return *cnt != 0 ? 0 : -EAGAIN;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_remove_wait_queue);
+
+/**
+ * eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
+ * @ctx: [in] Pointer to eventfd context.
+ * @no_wait: [in] Different from zero if the operation should not block.
+ * @cnt: [out] Pointer to the 64bit conter value.
+ *
+ * Returns zero if successful, or the following error codes:
+ *
+ * -EAGAIN : The operation would have blocked but @no_wait was nonzero.
+ * -ERESTARTSYS : A signal interrupted the wait operation.
+ *
+ * If @no_wait is zero, the function might sleep until the eventfd internal
+ * counter becomes greater than zero.
+ */
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt)
{
- struct eventfd_ctx *ctx = file->private_data;
ssize_t res;
- __u64 ucnt = 0;
DECLARE_WAITQUEUE(wait, current);
- if (count < sizeof(ucnt))
- return -EINVAL;
spin_lock_irq(&ctx->wqh.lock);
+ *cnt = 0;
res = -EAGAIN;
if (ctx->count > 0)
- res = sizeof(ucnt);
- else if (!(file->f_flags & O_NONBLOCK)) {
+ res = 0;
+ else if (!no_wait) {
__add_wait_queue(&ctx->wqh, &wait);
- for (res = 0;;) {
+ for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (ctx->count > 0) {
- res = sizeof(ucnt);
+ res = 0;
break;
}
if (signal_pending(current)) {
__remove_wait_queue(&ctx->wqh, &wait);
__set_current_state(TASK_RUNNING);
}
- if (likely(res > 0)) {
- ucnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count;
- ctx->count -= ucnt;
+ if (likely(res == 0)) {
+ eventfd_ctx_do_read(ctx, cnt);
if (waitqueue_active(&ctx->wqh))
wake_up_locked_poll(&ctx->wqh, POLLOUT);
}
spin_unlock_irq(&ctx->wqh.lock);
- if (res > 0 && put_user(ucnt, (__u64 __user *) buf))
- return -EFAULT;
return res;
}
+EXPORT_SYMBOL_GPL(eventfd_ctx_read);
+
+static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ __u64 cnt;
+
+ if (count < sizeof(cnt))
+ return -EINVAL;
+ res = eventfd_ctx_read(ctx, file->f_flags & O_NONBLOCK, &cnt);
+ if (res < 0)
+ return res;
+
+ return put_user(cnt, (__u64 __user *) buf) ? -EFAULT : sizeof(cnt);
+}
static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count,
loff_t *ppos)
int flush_old_exec(struct linux_binprm * bprm)
{
- char * name;
- int i, ch, retval;
- char tcomm[sizeof(current->comm)];
+ int retval;
/*
* Make sure we have a private signal table and that
goto out;
bprm->mm = NULL; /* We're using it now */
+ return 0;
+
+out:
+ return retval;
+}
+EXPORT_SYMBOL(flush_old_exec);
+
+void setup_new_exec(struct linux_binprm * bprm)
+{
+ int i, ch;
+ char * name;
+ char tcomm[sizeof(current->comm)];
+
+ arch_pick_mmap_layout(current->mm);
/* This is the point of no return */
current->sas_ss_sp = current->sas_ss_size = 0;
flush_signal_handlers(current, 0);
flush_old_files(current->files);
-
- return 0;
-
-out:
- return retval;
}
-
-EXPORT_SYMBOL(flush_old_exec);
+EXPORT_SYMBOL(setup_new_exec);
/*
* Prepare credentials and lock ->cred_guard_mutex.
fsdata);
}
+static int exofs_write_end(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata)
+{
+ struct inode *inode = mapping->host;
+ /* According to comment in simple_write_end i_mutex is held */
+ loff_t i_size = inode->i_size;
+ int ret;
+
+ ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata);
+ if (i_size != inode->i_size)
+ mark_inode_dirty(inode);
+ return ret;
+}
+
const struct address_space_operations exofs_aops = {
.readpage = exofs_readpage,
.readpages = exofs_readpages,
.writepage = exofs_writepage,
.writepages = exofs_writepages,
.write_begin = exofs_write_begin_export,
- .write_end = simple_write_end,
+ .write_end = exofs_write_end,
};
/******************************************************************************
#ifndef __EXOFS_PNFS_H__
#define __EXOFS_PNFS_H__
-#if defined(CONFIG_PNFS)
-
-
-/* FIXME: move this file to: linux/exportfs/pnfs_osd_xdr.h */
-#include "../nfs/objlayout/pnfs_osd_xdr.h"
-
-#else /* defined(CONFIG_PNFS) */
+#if ! defined(__PNFS_OSD_XDR_H__)
enum pnfs_iomode {
IOMODE_READ = 1,
u32 odm_raid_algorithm;
};
-#endif /* else defined(CONFIG_PNFS) */
+#endif /* ! defined(__PNFS_OSD_XDR_H__) */
#endif /* __EXOFS_PNFS_H__ */
config EXT4_USE_FOR_EXT23
bool "Use ext4 for ext2/ext3 file systems"
+ depends on EXT4_FS
depends on EXT3_FS=n || EXT2_FS=n
default y
help
#include <linux/module.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
-#include <linux/version.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include "ext4.h"
so set the magic i_delalloc_reserve_flag after taking the
inode allocation semaphore for */
#define EXT4_GET_BLOCKS_DELALLOC_RESERVE 0x0004
- /* Call ext4_da_update_reserve_space() after successfully
- allocating the blocks */
-#define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE 0x0008
/* caller is from the direct IO path, request to creation of an
unitialized extents if not allocated, split the uninitialized
extent if blocks has been preallocated already*/
-#define EXT4_GET_BLOCKS_DIO 0x0010
-#define EXT4_GET_BLOCKS_CONVERT 0x0020
+#define EXT4_GET_BLOCKS_DIO 0x0008
+#define EXT4_GET_BLOCKS_CONVERT 0x0010
#define EXT4_GET_BLOCKS_DIO_CREATE_EXT (EXT4_GET_BLOCKS_DIO|\
EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
/* Convert extent to initialized after direct IO complete */
unsigned int i_reserved_meta_blocks;
unsigned int i_allocated_meta_blocks;
unsigned short i_delalloc_reserved_flag;
+ sector_t i_da_metadata_calc_last_lblock;
+ int i_da_metadata_calc_len;
/* on-disk additional length */
__u16 i_extra_isize;
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
extern qsize_t *ext4_get_reserved_space(struct inode *inode);
extern int flush_aio_dio_completed_IO(struct inode *inode);
+extern void ext4_da_update_reserve_space(struct inode *inode,
+ int used, int quota_claim);
/* ioctl.c */
extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext));
}
-extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
+extern int ext4_ext_calc_metadata_amount(struct inode *inode,
+ sector_t lblocks);
extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex);
extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
* to allocate @blocks
* Worse case is one block per extent
*/
-int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks)
+int ext4_ext_calc_metadata_amount(struct inode *inode, sector_t lblock)
{
- int lcap, icap, rcap, leafs, idxs, num;
- int newextents = blocks;
-
- rcap = ext4_ext_space_root_idx(inode, 0);
- lcap = ext4_ext_space_block(inode, 0);
- icap = ext4_ext_space_block_idx(inode, 0);
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ int idxs, num = 0;
- /* number of new leaf blocks needed */
- num = leafs = (newextents + lcap - 1) / lcap;
+ idxs = ((inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
+ / sizeof(struct ext4_extent_idx));
/*
- * Worse case, we need separate index block(s)
- * to link all new leaf blocks
+ * If the new delayed allocation block is contiguous with the
+ * previous da block, it can share index blocks with the
+ * previous block, so we only need to allocate a new index
+ * block every idxs leaf blocks. At ldxs**2 blocks, we need
+ * an additional index block, and at ldxs**3 blocks, yet
+ * another index blocks.
*/
- idxs = (leafs + icap - 1) / icap;
- do {
- num += idxs;
- idxs = (idxs + icap - 1) / icap;
- } while (idxs > rcap);
+ if (ei->i_da_metadata_calc_len &&
+ ei->i_da_metadata_calc_last_lblock+1 == lblock) {
+ if ((ei->i_da_metadata_calc_len % idxs) == 0)
+ num++;
+ if ((ei->i_da_metadata_calc_len % (idxs*idxs)) == 0)
+ num++;
+ if ((ei->i_da_metadata_calc_len % (idxs*idxs*idxs)) == 0) {
+ num++;
+ ei->i_da_metadata_calc_len = 0;
+ } else
+ ei->i_da_metadata_calc_len++;
+ ei->i_da_metadata_calc_last_lblock++;
+ return num;
+ }
- return num;
+ /*
+ * In the worst case we need a new set of index blocks at
+ * every level of the inode's extent tree.
+ */
+ ei->i_da_metadata_calc_len = 1;
+ ei->i_da_metadata_calc_last_lblock = lblock;
+ return ext_depth(inode) + 1;
}
static int
return err;
}
+static void unmap_underlying_metadata_blocks(struct block_device *bdev,
+ sector_t block, int count)
+{
+ int i;
+ for (i = 0; i < count; i++)
+ unmap_underlying_metadata(bdev, block + i);
+}
+
static int
ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
ext4_lblk_t iblock, unsigned int max_blocks,
} else
allocated = ret;
set_buffer_new(bh_result);
+ /*
+ * if we allocated more blocks than requested
+ * we need to make sure we unmap the extra block
+ * allocated. The actual needed block will get
+ * unmapped later when we find the buffer_head marked
+ * new.
+ */
+ if (allocated > max_blocks) {
+ unmap_underlying_metadata_blocks(inode->i_sb->s_bdev,
+ newblock + max_blocks,
+ allocated - max_blocks);
+ allocated = max_blocks;
+ }
+
+ /*
+ * If we have done fallocate with the offset that is already
+ * delayed allocated, we would have block reservation
+ * and quota reservation done in the delayed write path.
+ * But fallocate would have already updated quota and block
+ * count for this offset. So cancel these reservation
+ */
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ ext4_da_update_reserve_space(inode, allocated, 0);
+
map_out:
set_buffer_mapped(bh_result);
out1:
* this situation is possible, though, _during_ tree modification;
* this is why assert can't be put in ext4_ext_find_extent()
*/
- BUG_ON(path[depth].p_ext == NULL && depth != 0);
+ if (path[depth].p_ext == NULL && depth != 0) {
+ ext4_error(inode->i_sb, __func__, "bad extent address "
+ "inode: %lu, iblock: %d, depth: %d",
+ inode->i_ino, iblock, depth);
+ err = -EIO;
+ goto out2;
+ }
eh = path[depth].p_hdr;
ex = path[depth].p_ext;
/* previous routine could use block we allocated */
newblock = ext_pblock(&newex);
allocated = ext4_ext_get_actual_len(&newex);
+ if (allocated > max_blocks)
+ allocated = max_blocks;
set_buffer_new(bh_result);
+ /*
+ * Update reserved blocks/metadata blocks after successful
+ * block allocation which had been deferred till now.
+ */
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ ext4_da_update_reserve_space(inode, allocated, 1);
+
/*
* Cache the extent and update transaction to commit on fdatasync only
* when it is _not_ an uninitialized extent.
return ext4_force_commit(inode->i_sb);
commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
- if (jbd2_log_start_commit(journal, commit_tid))
+ if (jbd2_log_start_commit(journal, commit_tid)) {
+ /*
+ * When the journal is on a different device than the
+ * fs data disk, we need to issue the barrier in
+ * writeback mode. (In ordered mode, the jbd2 layer
+ * will take care of issuing the barrier. In
+ * data=journal, all of the data blocks are written to
+ * the journal device.)
+ */
+ if (ext4_should_writeback_data(inode) &&
+ (journal->j_fs_dev != journal->j_dev) &&
+ (journal->j_flags & JBD2_BARRIER))
+ blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
jbd2_log_wait_commit(journal, commit_tid);
- else if (journal->j_flags & JBD2_BARRIER)
+ } else if (journal->j_flags & JBD2_BARRIER)
blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
return ret;
}
return &EXT4_I(inode)->i_reserved_quota;
}
#endif
+
/*
* Calculate the number of metadata blocks need to reserve
- * to allocate @blocks for non extent file based file
+ * to allocate a new block at @lblocks for non extent file based file
*/
-static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks)
+static int ext4_indirect_calc_metadata_amount(struct inode *inode,
+ sector_t lblock)
{
- int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb);
- int ind_blks, dind_blks, tind_blks;
-
- /* number of new indirect blocks needed */
- ind_blks = (blocks + icap - 1) / icap;
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ int dind_mask = EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1;
+ int blk_bits;
- dind_blks = (ind_blks + icap - 1) / icap;
+ if (lblock < EXT4_NDIR_BLOCKS)
+ return 0;
- tind_blks = 1;
+ lblock -= EXT4_NDIR_BLOCKS;
- return ind_blks + dind_blks + tind_blks;
+ if (ei->i_da_metadata_calc_len &&
+ (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) {
+ ei->i_da_metadata_calc_len++;
+ return 0;
+ }
+ ei->i_da_metadata_calc_last_lblock = lblock & dind_mask;
+ ei->i_da_metadata_calc_len = 1;
+ blk_bits = roundup_pow_of_two(lblock + 1);
+ return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1;
}
/*
* Calculate the number of metadata blocks need to reserve
- * to allocate given number of blocks
+ * to allocate a block located at @lblock
*/
-static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
+static int ext4_calc_metadata_amount(struct inode *inode, sector_t lblock)
{
- if (!blocks)
- return 0;
-
if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
- return ext4_ext_calc_metadata_amount(inode, blocks);
+ return ext4_ext_calc_metadata_amount(inode, lblock);
- return ext4_indirect_calc_metadata_amount(inode, blocks);
+ return ext4_indirect_calc_metadata_amount(inode, lblock);
}
-static void ext4_da_update_reserve_space(struct inode *inode, int used)
+/*
+ * Called with i_data_sem down, which is important since we can call
+ * ext4_discard_preallocations() from here.
+ */
+void ext4_da_update_reserve_space(struct inode *inode,
+ int used, int quota_claim)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
- int total, mdb, mdb_free, mdb_claim = 0;
-
- spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
- /* recalculate the number of metablocks still need to be reserved */
- total = EXT4_I(inode)->i_reserved_data_blocks - used;
- mdb = ext4_calc_metadata_amount(inode, total);
-
- /* figure out how many metablocks to release */
- BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
- mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb;
-
- if (mdb_free) {
- /* Account for allocated meta_blocks */
- mdb_claim = EXT4_I(inode)->i_allocated_meta_blocks;
- BUG_ON(mdb_free < mdb_claim);
- mdb_free -= mdb_claim;
-
- /* update fs dirty blocks counter */
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ int mdb_free = 0, allocated_meta_blocks = 0;
+
+ spin_lock(&ei->i_block_reservation_lock);
+ if (unlikely(used > ei->i_reserved_data_blocks)) {
+ ext4_msg(inode->i_sb, KERN_NOTICE, "%s: ino %lu, used %d "
+ "with only %d reserved data blocks\n",
+ __func__, inode->i_ino, used,
+ ei->i_reserved_data_blocks);
+ WARN_ON(1);
+ used = ei->i_reserved_data_blocks;
+ }
+
+ /* Update per-inode reservations */
+ ei->i_reserved_data_blocks -= used;
+ used += ei->i_allocated_meta_blocks;
+ ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks;
+ allocated_meta_blocks = ei->i_allocated_meta_blocks;
+ ei->i_allocated_meta_blocks = 0;
+ percpu_counter_sub(&sbi->s_dirtyblocks_counter, used);
+
+ if (ei->i_reserved_data_blocks == 0) {
+ /*
+ * We can release all of the reserved metadata blocks
+ * only when we have written all of the delayed
+ * allocation blocks.
+ */
+ mdb_free = ei->i_reserved_meta_blocks;
+ ei->i_reserved_meta_blocks = 0;
+ ei->i_da_metadata_calc_len = 0;
percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free);
- EXT4_I(inode)->i_allocated_meta_blocks = 0;
- EXT4_I(inode)->i_reserved_meta_blocks = mdb;
}
-
- /* update per-inode reservations */
- BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks);
- EXT4_I(inode)->i_reserved_data_blocks -= used;
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, used + mdb_claim);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- vfs_dq_claim_block(inode, used + mdb_claim);
-
- /*
- * free those over-booking quota for metadata blocks
- */
- if (mdb_free)
- vfs_dq_release_reservation_block(inode, mdb_free);
+ /* Update quota subsystem */
+ if (quota_claim) {
+ vfs_dq_claim_block(inode, used);
+ if (mdb_free)
+ vfs_dq_release_reservation_block(inode, mdb_free);
+ } else {
+ /*
+ * We did fallocate with an offset that is already delayed
+ * allocated. So on delayed allocated writeback we should
+ * not update the quota for allocated blocks. But then
+ * converting an fallocate region to initialized region would
+ * have caused a metadata allocation. So claim quota for
+ * that
+ */
+ if (allocated_meta_blocks)
+ vfs_dq_claim_block(inode, allocated_meta_blocks);
+ vfs_dq_release_reservation_block(inode, mdb_free + used);
+ }
/*
* If we have done all the pending block allocations and if
* there aren't any writers on the inode, we can discard the
* inode's preallocations.
*/
- if (!total && (atomic_read(&inode->i_writecount) == 0))
+ if ((ei->i_reserved_data_blocks == 0) &&
+ (atomic_read(&inode->i_writecount) == 0))
ext4_discard_preallocations(inode);
}
*/
EXT4_I(inode)->i_state &= ~EXT4_STATE_EXT_MIGRATE;
}
- }
+ /*
+ * Update reserved blocks/metadata blocks after successful
+ * block allocation which had been deferred till now. We don't
+ * support fallocate for non extent files. So we can update
+ * reserve space here.
+ */
+ if ((retval > 0) &&
+ (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
+ ext4_da_update_reserve_space(inode, retval, 1);
+ }
if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
EXT4_I(inode)->i_delalloc_reserved_flag = 0;
- /*
- * Update reserved blocks/metadata blocks after successful
- * block allocation which had been deferred till now.
- */
- if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE))
- ext4_da_update_reserve_space(inode, retval);
-
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && buffer_mapped(bh)) {
int ret = check_block_validity(inode, "file system "
return ret ? ret : copied;
}
-static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
+/*
+ * Reserve a single block located at lblock
+ */
+static int ext4_da_reserve_space(struct inode *inode, sector_t lblock)
{
int retries = 0;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
- unsigned long md_needed, mdblocks, total = 0;
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ unsigned long md_needed, md_reserved;
/*
* recalculate the amount of metadata blocks to reserve
* worse case is one extent per block
*/
repeat:
- spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
- total = EXT4_I(inode)->i_reserved_data_blocks + nrblocks;
- mdblocks = ext4_calc_metadata_amount(inode, total);
- BUG_ON(mdblocks < EXT4_I(inode)->i_reserved_meta_blocks);
-
- md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks;
- total = md_needed + nrblocks;
- spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ spin_lock(&ei->i_block_reservation_lock);
+ md_reserved = ei->i_reserved_meta_blocks;
+ md_needed = ext4_calc_metadata_amount(inode, lblock);
+ spin_unlock(&ei->i_block_reservation_lock);
/*
* Make quota reservation here to prevent quota overflow
* later. Real quota accounting is done at pages writeout
* time.
*/
- if (vfs_dq_reserve_block(inode, total))
+ if (vfs_dq_reserve_block(inode, md_needed + 1))
return -EDQUOT;
- if (ext4_claim_free_blocks(sbi, total)) {
- vfs_dq_release_reservation_block(inode, total);
+ if (ext4_claim_free_blocks(sbi, md_needed + 1)) {
+ vfs_dq_release_reservation_block(inode, md_needed + 1);
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
yield();
goto repeat;
}
return -ENOSPC;
}
- spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
- EXT4_I(inode)->i_reserved_data_blocks += nrblocks;
- EXT4_I(inode)->i_reserved_meta_blocks += md_needed;
- spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ spin_lock(&ei->i_block_reservation_lock);
+ ei->i_reserved_data_blocks++;
+ ei->i_reserved_meta_blocks += md_needed;
+ spin_unlock(&ei->i_block_reservation_lock);
return 0; /* success */
}
static void ext4_da_release_space(struct inode *inode, int to_free)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
- int total, mdb, mdb_free, release;
+ struct ext4_inode_info *ei = EXT4_I(inode);
if (!to_free)
return; /* Nothing to release, exit */
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
- if (!EXT4_I(inode)->i_reserved_data_blocks) {
+ if (unlikely(to_free > ei->i_reserved_data_blocks)) {
/*
- * if there is no reserved blocks, but we try to free some
- * then the counter is messed up somewhere.
- * but since this function is called from invalidate
- * page, it's harmless to return without any action
+ * if there aren't enough reserved blocks, then the
+ * counter is messed up somewhere. Since this
+ * function is called from invalidate page, it's
+ * harmless to return without any action.
*/
- printk(KERN_INFO "ext4 delalloc try to release %d reserved "
- "blocks for inode %lu, but there is no reserved "
- "data blocks\n", to_free, inode->i_ino);
- spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- return;
+ ext4_msg(inode->i_sb, KERN_NOTICE, "ext4_da_release_space: "
+ "ino %lu, to_free %d with only %d reserved "
+ "data blocks\n", inode->i_ino, to_free,
+ ei->i_reserved_data_blocks);
+ WARN_ON(1);
+ to_free = ei->i_reserved_data_blocks;
}
+ ei->i_reserved_data_blocks -= to_free;
- /* recalculate the number of metablocks still need to be reserved */
- total = EXT4_I(inode)->i_reserved_data_blocks - to_free;
- mdb = ext4_calc_metadata_amount(inode, total);
-
- /* figure out how many metablocks to release */
- BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
- mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb;
-
- release = to_free + mdb_free;
-
- /* update fs dirty blocks counter for truncate case */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, release);
+ if (ei->i_reserved_data_blocks == 0) {
+ /*
+ * We can release all of the reserved metadata blocks
+ * only when we have written all of the delayed
+ * allocation blocks.
+ */
+ to_free += ei->i_reserved_meta_blocks;
+ ei->i_reserved_meta_blocks = 0;
+ ei->i_da_metadata_calc_len = 0;
+ }
- /* update per-inode reservations */
- BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks);
- EXT4_I(inode)->i_reserved_data_blocks -= to_free;
+ /* update fs dirty blocks counter */
+ percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free);
- BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
- EXT4_I(inode)->i_reserved_meta_blocks = mdb;
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- vfs_dq_release_reservation_block(inode, release);
+ vfs_dq_release_reservation_block(inode, to_free);
}
static void ext4_da_page_release_reservation(struct page *page,
* variables are updated after the blocks have been allocated.
*/
new.b_state = 0;
- get_blocks_flags = (EXT4_GET_BLOCKS_CREATE |
- EXT4_GET_BLOCKS_DELALLOC_RESERVE);
+ get_blocks_flags = EXT4_GET_BLOCKS_CREATE;
if (mpd->b_state & (1 << BH_Delay))
- get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE;
+ get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
+
blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks,
&new, get_blocks_flags);
if (blks < 0) {
* XXX: __block_prepare_write() unmaps passed block,
* is it OK?
*/
- ret = ext4_da_reserve_space(inode, 1);
+ ret = ext4_da_reserve_space(inode, iblock);
if (ret)
/* not enough space to reserve */
return ret;
out_writepages:
if (!no_nrwrite_index_update)
wbc->no_nrwrite_index_update = 0;
- if (wbc->nr_to_write > nr_to_writebump)
- wbc->nr_to_write -= nr_to_writebump;
+ wbc->nr_to_write -= nr_to_writebump;
wbc->range_start = range_start;
trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
return ret;
if (2 * free_blocks < 3 * dirty_blocks ||
free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) {
/*
- * free block count is less that 150% of dirty blocks
- * or free blocks is less that watermark
+ * free block count is less than 150% of dirty blocks
+ * or free blocks is less than watermark
*/
return 1;
}
+ /*
+ * Even if we don't switch but are nearing capacity,
+ * start pushing delalloc when 1/2 of free blocks are dirty.
+ */
+ if (free_blocks < 2 * dirty_blocks)
+ writeback_inodes_sb_if_idle(sb);
+
return 0;
}
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- int ret, retries = 0;
+ int ret, retries = 0, quota_retries = 0;
struct page *page;
pgoff_t index;
unsigned from, to;
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
+
+ if ((ret == -EDQUOT) &&
+ EXT4_I(inode)->i_reserved_meta_blocks &&
+ (quota_retries++ < 3)) {
+ /*
+ * Since we often over-estimate the number of meta
+ * data blocks required, we may sometimes get a
+ * spurios out of quota error even though there would
+ * be enough space once we write the data blocks and
+ * find out how many meta data blocks were _really_
+ * required. So try forcing the inode write to see if
+ * that helps.
+ */
+ write_inode_now(inode, (quota_retries == 3));
+ goto retry;
+ }
out:
return ret;
}
#include <linux/proc_fs.h>
#include <linux/pagemap.h>
#include <linux/seq_file.h>
-#include <linux/version.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include "ext4_jbd2.h"
ei->i_reserved_data_blocks = 0;
ei->i_reserved_meta_blocks = 0;
ei->i_allocated_meta_blocks = 0;
+ ei->i_da_metadata_calc_len = 0;
ei->i_delalloc_reserved_flag = 0;
spin_lock_init(&(ei->i_block_reservation_lock));
#ifdef CONFIG_QUOTA
struct super_block *sb = sbi->s_buddy_cache->i_sb;
return snprintf(buf, PAGE_SIZE, "%llu\n",
- sbi->s_kbytes_written +
+ (unsigned long long)(sbi->s_kbytes_written +
((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
- EXT4_SB(sb)->s_sectors_written_start) >> 1));
+ EXT4_SB(sb)->s_sectors_written_start) >> 1)));
}
static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
{
unregister_filesystem(&ext2_fs_type);
}
+MODULE_ALIAS("ext2");
#else
static inline void register_as_ext2(void) { }
static inline void unregister_as_ext2(void) { }
{
unregister_filesystem(&ext3_fs_type);
}
+MODULE_ALIAS("ext3");
#else
static inline void register_as_ext3(void) { }
static inline void unregister_as_ext3(void) { }
goto cleanup;
kfree(b_entry_name);
kfree(buffer);
+ b_entry_name = NULL;
+ buffer = NULL;
brelse(is->iloc.bh);
kfree(is);
kfree(bs);
static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
int force)
{
- write_lock_irq(&filp->f_owner.lock);
+ unsigned long flags;
+
+ write_lock_irqsave(&filp->f_owner.lock, flags);
if (force || !filp->f_owner.pid) {
put_pid(filp->f_owner.pid);
filp->f_owner.pid = get_pid(pid);
filp->f_owner.euid = cred->euid;
}
}
- write_unlock_irq(&filp->f_owner.lock);
+ write_unlock_irqrestore(&filp->f_owner.lock, flags);
}
int __f_setown(struct file *filp, struct pid *pid, enum pid_type type,
static struct kmem_cache *fasync_cache __read_mostly;
/*
- * fasync_helper() is used by almost all character device drivers
- * to set up the fasync queue. It returns negative on error, 0 if it did
- * no changes and positive if it added/deleted the entry.
+ * Remove a fasync entry. If successfully removed, return
+ * positive and clear the FASYNC flag. If no entry exists,
+ * do nothing and return 0.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ *
+ * We always take the 'filp->f_lock', in since fasync_lock
+ * needs to be irq-safe.
*/
-int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+static int fasync_remove_entry(struct file *filp, struct fasync_struct **fapp)
{
struct fasync_struct *fa, **fp;
- struct fasync_struct *new = NULL;
int result = 0;
- if (on) {
- new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
- if (!new)
- return -ENOMEM;
+ spin_lock(&filp->f_lock);
+ write_lock_irq(&fasync_lock);
+ for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
+ if (fa->fa_file != filp)
+ continue;
+ *fp = fa->fa_next;
+ kmem_cache_free(fasync_cache, fa);
+ filp->f_flags &= ~FASYNC;
+ result = 1;
+ break;
}
+ write_unlock_irq(&fasync_lock);
+ spin_unlock(&filp->f_lock);
+ return result;
+}
+
+/*
+ * Add a fasync entry. Return negative on error, positive if
+ * added, and zero if did nothing but change an existing one.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ */
+static int fasync_add_entry(int fd, struct file *filp, struct fasync_struct **fapp)
+{
+ struct fasync_struct *new, *fa, **fp;
+ int result = 0;
+
+ new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
- /*
- * We need to take f_lock first since it's not an IRQ-safe
- * lock.
- */
spin_lock(&filp->f_lock);
write_lock_irq(&fasync_lock);
for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
- if (fa->fa_file == filp) {
- if(on) {
- fa->fa_fd = fd;
- kmem_cache_free(fasync_cache, new);
- } else {
- *fp = fa->fa_next;
- kmem_cache_free(fasync_cache, fa);
- result = 1;
- }
- goto out;
- }
+ if (fa->fa_file != filp)
+ continue;
+ fa->fa_fd = fd;
+ kmem_cache_free(fasync_cache, new);
+ goto out;
}
- if (on) {
- new->magic = FASYNC_MAGIC;
- new->fa_file = filp;
- new->fa_fd = fd;
- new->fa_next = *fapp;
- *fapp = new;
- result = 1;
- }
+ new->magic = FASYNC_MAGIC;
+ new->fa_file = filp;
+ new->fa_fd = fd;
+ new->fa_next = *fapp;
+ *fapp = new;
+ result = 1;
+ filp->f_flags |= FASYNC;
+
out:
- if (on)
- filp->f_flags |= FASYNC;
- else
- filp->f_flags &= ~FASYNC;
write_unlock_irq(&fasync_lock);
spin_unlock(&filp->f_lock);
return result;
}
+/*
+ * fasync_helper() is used by almost all character device drivers
+ * to set up the fasync queue, and for regular files by the file
+ * lease code. It returns negative on error, 0 if it did no changes
+ * and positive if it added/deleted the entry.
+ */
+int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+{
+ if (!on)
+ return fasync_remove_entry(filp, fapp);
+ return fasync_add_entry(fd, filp, fapp);
+}
+
EXPORT_SYMBOL(fasync_helper);
void __kill_fasync(struct fasync_struct *fa, int sig, int band)
/**
* bdi_start_writeback - start writeback
* @bdi: the backing device to write from
+ * @sb: write inodes from this super_block
* @nr_pages: the number of pages to write
*
* Description:
}
EXPORT_SYMBOL(writeback_inodes_sb);
+/**
+ * writeback_inodes_sb_if_idle - start writeback if none underway
+ * @sb: the superblock
+ *
+ * Invoke writeback_inodes_sb if no writeback is currently underway.
+ * Returns 1 if writeback was started, 0 if not.
+ */
+int writeback_inodes_sb_if_idle(struct super_block *sb)
+{
+ if (!writeback_in_progress(sb->s_bdi)) {
+ writeback_inodes_sb(sb);
+ return 1;
+ } else
+ return 0;
+}
+EXPORT_SYMBOL(writeback_inodes_sb_if_idle);
+
/**
* sync_inodes_sb - sync sb inode pages
* @sb: the superblock
return ret;
}
+/**
+ * gfs2_file_aio_write - Perform a write to a file
+ * @iocb: The io context
+ * @iov: The data to write
+ * @nr_segs: Number of @iov segments
+ * @pos: The file position
+ *
+ * We have to do a lock/unlock here to refresh the inode size for
+ * O_APPEND writes, otherwise we can land up writing at the wrong
+ * offset. There is still a race, but provided the app is using its
+ * own file locking, this will make O_APPEND work as expected.
+ *
+ */
+
+static ssize_t gfs2_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ struct file *file = iocb->ki_filp;
+
+ if (file->f_flags & O_APPEND) {
+ struct dentry *dentry = file->f_dentry;
+ struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
+ if (ret)
+ return ret;
+ gfs2_glock_dq_uninit(&gh);
+ }
+
+ return generic_file_aio_write(iocb, iov, nr_segs, pos);
+}
+
#ifdef CONFIG_GFS2_FS_LOCKING_DLM
/**
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.write = do_sync_write,
- .aio_write = generic_file_aio_write,
+ .aio_write = gfs2_file_aio_write,
.unlocked_ioctl = gfs2_ioctl,
.mmap = gfs2_mmap,
.open = gfs2_open,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.write = do_sync_write,
- .aio_write = generic_file_aio_write,
+ .aio_write = gfs2_file_aio_write,
.unlocked_ioctl = gfs2_ioctl,
.mmap = gfs2_mmap,
.open = gfs2_open,
if (aspace) {
mapping_set_gfp_mask(aspace->i_mapping, GFP_NOFS);
aspace->i_mapping->a_ops = &aspace_aops;
- aspace->i_size = ~0ULL;
+ aspace->i_size = MAX_LFS_FILESIZE;
ip = GFS2_I(aspace);
clear_bit(GIF_USER, &ip->i_flags);
insert_inode_hash(aspace);
struct gfs2_rgrpd *nrgd;
unsigned int num_gh;
int dir_rename = 0;
- int alloc_required;
+ int alloc_required = 0;
unsigned int x;
int error;
goto out_gunlock;
}
- alloc_required = error = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
+ if (nip == NULL)
+ alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
+ error = alloc_required;
if (error < 0)
goto out_gunlock;
error = 0;
int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_ea_location el;
struct buffer_head *dibh;
int error;
return error;
if (GFS2_EA_IS_STUFFED(el.el_ea)) {
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
- if (error)
- return error;
-
- gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1);
- memcpy(GFS2_EA2DATA(el.el_ea), data,
- GFS2_EA_DATA_LEN(el.el_ea));
- } else
+ error = gfs2_trans_begin(sdp, RES_DINODE + RES_EATTR, 0);
+ if (error == 0) {
+ gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1);
+ memcpy(GFS2_EA2DATA(el.el_ea), data,
+ GFS2_EA_DATA_LEN(el.el_ea));
+ }
+ } else {
error = ea_acl_chmod_unstuffed(ip, el.el_ea, data);
+ }
+ brelse(el.el_bh);
if (error)
return error;
brelse(dibh);
}
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
-
+ gfs2_trans_end(sdp);
return error;
}
static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
int buflen)
{
- struct dentry *proc_dentry;
-
- proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer,
buflen);
}
static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- struct dentry *proc_dentry;
-
- proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
}
+static void hppfs_put_link(struct dentry *dentry, struct nameidata *nd,
+ void *cookie)
+{
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+
+ if (proc_dentry->d_inode->i_op->put_link)
+ proc_dentry->d_inode->i_op->put_link(proc_dentry, nd, cookie);
+}
+
static const struct inode_operations hppfs_dir_iops = {
.lookup = hppfs_lookup,
};
static const struct inode_operations hppfs_link_iops = {
.readlink = hppfs_readlink,
.follow_link = hppfs_follow_link,
+ .put_link = hppfs_put_link,
};
static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
#include <linux/jbd2.h>
#include <linux/errno.h>
#include <linux/slab.h>
+#include <linux/blkdev.h>
#include <trace/events/jbd2.h>
/*
journal->j_tail_sequence = first_tid;
journal->j_tail = blocknr;
spin_unlock(&journal->j_state_lock);
+
+ /*
+ * If there is an external journal, we need to make sure that
+ * any data blocks that were recently written out --- perhaps
+ * by jbd2_log_do_checkpoint() --- are flushed out before we
+ * drop the transactions from the external journal. It's
+ * unlikely this will be necessary, especially with a
+ * appropriately sized journal, but we need this to guarantee
+ * correctness. Fortunately jbd2_cleanup_journal_tail()
+ * doesn't get called all that often.
+ */
+ if ((journal->j_fs_dev != journal->j_dev) &&
+ (journal->j_flags & JBD2_BARRIER))
+ blkdev_issue_flush(journal->j_fs_dev, NULL);
if (!(journal->j_flags & JBD2_ABORT))
jbd2_journal_update_superblock(journal, 1);
return 0;
ret = err;
spin_lock(&journal->j_list_lock);
J_ASSERT(jinode->i_transaction == commit_transaction);
+ commit_transaction->t_flushed_data_blocks = 1;
jinode->i_flags &= ~JI_COMMIT_RUNNING;
wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
}
}
}
- /* Done it all: now write the commit record asynchronously. */
+ /*
+ * If the journal is not located on the file system device,
+ * then we must flush the file system device before we issue
+ * the commit record
+ */
+ if (commit_transaction->t_flushed_data_blocks &&
+ (journal->j_fs_dev != journal->j_dev) &&
+ (journal->j_flags & JBD2_BARRIER))
+ blkdev_issue_flush(journal->j_fs_dev, NULL);
+ /* Done it all: now write the commit record asynchronously. */
if (JBD2_HAS_INCOMPAT_FEATURE(journal,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
err = journal_submit_commit_record(journal, commit_transaction,
blkdev_issue_flush(journal->j_dev, NULL);
}
- /*
- * This is the right place to wait for data buffers both for ASYNC
- * and !ASYNC commit. If commit is ASYNC, we need to wait only after
- * the commit block went to disk (which happens above). If commit is
- * SYNC, we need to wait for data buffers before we start writing
- * commit block, which happens below in such setting.
- */
err = journal_finish_inode_data_buffers(journal, commit_transaction);
if (err) {
printk(KERN_WARNING
journal_t *journal;
int err;
- journal = kzalloc(sizeof(*journal), GFP_KERNEL|__GFP_NOFAIL);
+ journal = kzalloc(sizeof(*journal), GFP_KERNEL);
if (!journal)
goto fail;
/*
* Searching includes executable on directories, else just read.
*/
+ mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
if (mask == MAY_READ || (S_ISDIR(inode->i_mode) && !(mask & MAY_WRITE)))
if (capable(CAP_DAC_READ_SEARCH))
return 0;
dget(dentry);
}
mntget(path->mnt);
+ nd->last_type = LAST_BIND;
cookie = dentry->d_inode->i_op->follow_link(dentry, nd);
error = PTR_ERR(cookie);
if (!IS_ERR(cookie)) {
struct file *filp;
struct nameidata nd;
int error;
- struct path path, save;
+ struct path path;
struct dentry *dir;
int count = 0;
int will_truncate;
int flag = open_to_namei_flags(open_flag);
+ int force_reval = 0;
/*
* O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only
open_flag |= O_DSYNC;
if (!acc_mode)
- acc_mode = MAY_OPEN | ACC_MODE(flag);
+ acc_mode = MAY_OPEN | ACC_MODE(open_flag);
/* O_TRUNC implies we need access checks for write permissions */
if (flag & O_TRUNC)
/*
* Create - we need to know the parent.
*/
+reval:
error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
if (error)
return ERR_PTR(error);
+ if (force_reval)
+ nd.flags |= LOOKUP_REVAL;
error = path_walk(pathname, &nd);
if (error) {
if (nd.root.mnt)
error = security_inode_follow_link(path.dentry, &nd);
if (error)
goto exit_dput;
- save = nd.path;
- path_get(&save);
error = __do_follow_link(&path, &nd);
- if (error == -ESTALE) {
- /* nd.path had been dropped */
- nd.path = save;
- path_get(&nd.path);
- nd.flags |= LOOKUP_REVAL;
- error = __do_follow_link(&path, &nd);
- }
- path_put(&save);
path_put(&path);
if (error) {
/* Does someone understand code flow here? Or it is only
release_open_intent(&nd);
if (nd.root.mnt)
path_put(&nd.root);
+ if (error == -ESTALE && !force_reval) {
+ force_reval = 1;
+ goto reval;
+ }
return ERR_PTR(error);
}
nd.flags &= ~LOOKUP_PARENT;
int may_umount(struct vfsmount *mnt)
{
int ret = 1;
+ down_read(&namespace_sem);
spin_lock(&vfsmount_lock);
if (propagate_mount_busy(mnt, 2))
ret = 0;
spin_unlock(&vfsmount_lock);
+ up_read(&namespace_sem);
return ret;
}
if (err)
goto out_cleanup_ids;
+ spin_lock(&vfsmount_lock);
+
if (IS_MNT_SHARED(dest_mnt)) {
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
set_mnt_shared(p);
}
-
- spin_lock(&vfsmount_lock);
if (parent_path) {
detach_mnt(source_mnt, parent_path);
attach_mnt(source_mnt, path);
err = change_mount_flags(path->mnt, flags);
else
err = do_remount_sb(sb, flags, data, 0);
- if (!err)
+ if (!err) {
+ spin_lock(&vfsmount_lock);
+ mnt_flags |= path->mnt->mnt_flags & MNT_PNODE_MASK;
path->mnt->mnt_flags = mnt_flags;
+ spin_unlock(&vfsmount_lock);
+ }
up_write(&sb->s_umount);
if (!err) {
security_sb_post_remount(path->mnt, flags, data);
{
int err;
+ mnt_flags &= ~(MNT_SHARED | MNT_WRITE_HOLD);
+
down_write(&namespace_sem);
/* Something was mounted here while we slept */
while (d_mountpoint(path->dentry) &&
goto out;
new_dentry = dentry;
+ rehash = NULL;
new_inode = NULL;
}
}
int (*fsync) (struct file *, struct dentry *, int);
int err;
- err = filemap_fdatawrite(inode->i_mapping);
+ err = filemap_write_and_wait(inode->i_mapping);
if (err == 0 && fop && (fsync = fop->fsync))
err = fsync(filp, dp, 0);
- if (err == 0)
- err = filemap_fdatawait(inode->i_mapping);
-
return err;
}
key = page_index(bh->b_page) << (PAGE_CACHE_SHIFT -
bmap->b_inode->i_blkbits);
- for (pbh = page_buffers(bh->b_page); pbh != bh;
- pbh = pbh->b_this_page, key++);
+ for (pbh = page_buffers(bh->b_page); pbh != bh; pbh = pbh->b_this_page)
+ key++;
return key;
}
tnicps += nicps;
nilfs_mdt_mark_buffer_dirty(cp_bh);
nilfs_mdt_mark_dirty(cpfile);
- if (!nilfs_cpfile_is_in_first(cpfile, cno) &&
- (count = nilfs_cpfile_block_sub_valid_checkpoints(
- cpfile, cp_bh, kaddr, nicps)) == 0) {
- /* make hole */
- kunmap_atomic(kaddr, KM_USER0);
- brelse(cp_bh);
- ret = nilfs_cpfile_delete_checkpoint_block(
- cpfile, cno);
- if (ret == 0)
- continue;
- printk(KERN_ERR "%s: cannot delete block\n",
- __func__);
- break;
+ if (!nilfs_cpfile_is_in_first(cpfile, cno)) {
+ count =
+ nilfs_cpfile_block_sub_valid_checkpoints(
+ cpfile, cp_bh, kaddr, nicps);
+ if (count == 0) {
+ /* make hole */
+ kunmap_atomic(kaddr, KM_USER0);
+ brelse(cp_bh);
+ ret =
+ nilfs_cpfile_delete_checkpoint_block(
+ cpfile, cno);
+ if (ret == 0)
+ continue;
+ printk(KERN_ERR
+ "%s: cannot delete block\n",
+ __func__);
+ break;
+ }
}
}
struct nilfs_direct *direct;
__u64 ptr;
- direct = (struct nilfs_direct *)bmap;
- if ((key > NILFS_DIRECT_KEY_MAX) ||
- (level != 1) || /* XXX: use macro for level 1 */
- ((ptr = nilfs_direct_get_ptr(direct, key)) ==
- NILFS_BMAP_INVALID_PTR))
+ direct = (struct nilfs_direct *)bmap; /* XXX: use macro for level 1 */
+ if (key > NILFS_DIRECT_KEY_MAX || level != 1)
+ return -ENOENT;
+ ptr = nilfs_direct_get_ptr(direct, key);
+ if (ptr == NILFS_BMAP_INVALID_PTR)
return -ENOENT;
if (ptrp != NULL)
sector_t blocknr;
int ret, cnt;
- if (key > NILFS_DIRECT_KEY_MAX ||
- (ptr = nilfs_direct_get_ptr(direct, key)) ==
- NILFS_BMAP_INVALID_PTR)
+ if (key > NILFS_DIRECT_KEY_MAX)
+ return -ENOENT;
+ ptr = nilfs_direct_get_ptr(direct, key);
+ if (ptr == NILFS_BMAP_INVALID_PTR)
return -ENOENT;
if (NILFS_BMAP_USE_VBN(bmap)) {
unsigned int cmd, void __user *argp)
{
struct nilfs_argv argv[5];
- const static size_t argsz[5] = {
+ static const size_t argsz[5] = {
sizeof(struct nilfs_vdesc),
sizeof(struct nilfs_period),
sizeof(__u64),
if (warned)
return 0;
- warned = false;
+ warned = true;
entry = p;
ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
spin_lock(&group->inotify_data.idr_lock);
ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd,
+ group->inotify_data.last_wd+1,
&tmp_ientry->wd);
spin_unlock(&group->inotify_data.idr_lock);
if (ret) {
spin_lock_init(&group->inotify_data.idr_lock);
idr_init(&group->inotify_data.idr);
- group->inotify_data.last_wd = 1;
+ group->inotify_data.last_wd = 0;
group->inotify_data.user = user;
group->inotify_data.fa = NULL;
loff_t *ppos,
size_t count,
int appending,
- int *direct_io)
+ int *direct_io,
+ int *has_refcount)
{
int ret = 0, meta_level = 0;
struct inode *inode = dentry->d_inode;
saved_pos,
count,
&meta_level);
+ if (has_refcount)
+ *has_refcount = 1;
}
if (ret < 0) {
break;
}
+ if (has_refcount && *has_refcount == 1) {
+ *direct_io = 0;
+ break;
+ }
/*
* Allowing concurrent direct writes means
* i_size changes wouldn't be synchronized, so
loff_t pos)
{
int ret, direct_io, appending, rw_level, have_alloc_sem = 0;
- int can_do_direct;
+ int can_do_direct, has_refcount = 0;
ssize_t written = 0;
size_t ocount; /* original count */
size_t count; /* after file limit checks */
can_do_direct = direct_io;
ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos,
iocb->ki_left, appending,
- &can_do_direct);
+ &can_do_direct, &has_refcount);
if (ret < 0) {
mlog_errno(ret);
goto out;
/* buffered aio wouldn't have proper lock coverage today */
BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
- if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode)) {
+ if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode) ||
+ (file->f_flags & O_DIRECT && has_refcount)) {
ret = filemap_fdatawrite_range(file->f_mapping, pos,
pos + count - 1);
if (ret < 0)
written = ret;
if (!ret && (old_size != i_size_read(inode) ||
- old_clusters != OCFS2_I(inode)->ip_clusters)) {
+ old_clusters != OCFS2_I(inode)->ip_clusters ||
+ has_refcount)) {
ret = jbd2_journal_force_commit(osb->journal->j_journal);
if (ret < 0)
written = ret;
int ret;
ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
- sd->total_len, 0, NULL);
+ sd->total_len, 0, NULL, NULL);
if (ret < 0) {
mlog_errno(ret);
return ret;
p->nivcsw);
}
-#ifdef CONFIG_MMU
-
-struct stack_stats {
- struct vm_area_struct *vma;
- unsigned long startpage;
- unsigned long usage;
-};
-
-static int stack_usage_pte_range(pmd_t *pmd, unsigned long addr,
- unsigned long end, struct mm_walk *walk)
-{
- struct stack_stats *ss = walk->private;
- struct vm_area_struct *vma = ss->vma;
- pte_t *pte, ptent;
- spinlock_t *ptl;
- int ret = 0;
-
- pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
- for (; addr != end; pte++, addr += PAGE_SIZE) {
- ptent = *pte;
-
-#ifdef CONFIG_STACK_GROWSUP
- if (pte_present(ptent) || is_swap_pte(ptent))
- ss->usage = addr - ss->startpage + PAGE_SIZE;
-#else
- if (pte_present(ptent) || is_swap_pte(ptent)) {
- ss->usage = ss->startpage - addr + PAGE_SIZE;
- pte++;
- ret = 1;
- break;
- }
-#endif
- }
- pte_unmap_unlock(pte - 1, ptl);
- cond_resched();
- return ret;
-}
-
-static inline unsigned long get_stack_usage_in_bytes(struct vm_area_struct *vma,
- struct task_struct *task)
-{
- struct stack_stats ss;
- struct mm_walk stack_walk = {
- .pmd_entry = stack_usage_pte_range,
- .mm = vma->vm_mm,
- .private = &ss,
- };
-
- if (!vma->vm_mm || is_vm_hugetlb_page(vma))
- return 0;
-
- ss.vma = vma;
- ss.startpage = task->stack_start & PAGE_MASK;
- ss.usage = 0;
-
-#ifdef CONFIG_STACK_GROWSUP
- walk_page_range(KSTK_ESP(task) & PAGE_MASK, vma->vm_end,
- &stack_walk);
-#else
- walk_page_range(vma->vm_start, (KSTK_ESP(task) & PAGE_MASK) + PAGE_SIZE,
- &stack_walk);
-#endif
- return ss.usage;
-}
-
-static inline void task_show_stack_usage(struct seq_file *m,
- struct task_struct *task)
-{
- struct vm_area_struct *vma;
- struct mm_struct *mm = get_task_mm(task);
-
- if (mm) {
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, task->stack_start);
- if (vma)
- seq_printf(m, "Stack usage:\t%lu kB\n",
- get_stack_usage_in_bytes(vma, task) >> 10);
-
- up_read(&mm->mmap_sem);
- mmput(mm);
- }
-}
-#else
-static void task_show_stack_usage(struct seq_file *m, struct task_struct *task)
-{
-}
-#endif /* CONFIG_MMU */
-
static void task_cpus_allowed(struct seq_file *m, struct task_struct *task)
{
seq_printf(m, "Cpus_allowed:\t");
task_show_regs(m, task);
#endif
task_context_switch_counts(m, task);
- task_show_stack_usage(m, task);
return 0;
}
goto out;
error = PROC_I(inode)->op.proc_get_link(inode, &nd->path);
- nd->last_type = LAST_BIND;
out:
return ERR_PTR(error);
}
if (!pte_present(ptent))
continue;
- mss->resident += PAGE_SIZE;
-
page = vm_normal_page(vma, addr, ptent);
if (!page)
continue;
+ mss->resident += PAGE_SIZE;
/* Accumulate the size in pages that have been accessed. */
if (pte_young(ptent) || PageReferenced(page))
mss->referenced += PAGE_SIZE;
static qsize_t inode_get_rsv_space(struct inode *inode)
{
qsize_t ret;
+
+ if (!inode->i_sb->dq_op->get_reserved_space)
+ return 0;
spin_lock(&inode->i_lock);
ret = *inode_reserved_space(inode);
spin_unlock(&inode->i_lock);
return ret;
}
-/*****************************************************************************/
-/*
- * check that file shrinkage doesn't leave any VMAs dangling in midair
- */
-static int ramfs_nommu_check_mappings(struct inode *inode,
- size_t newsize, size_t size)
-{
- struct vm_area_struct *vma;
- struct prio_tree_iter iter;
-
- /* search for VMAs that fall within the dead zone */
- vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
- newsize >> PAGE_SHIFT,
- (size + PAGE_SIZE - 1) >> PAGE_SHIFT
- ) {
- /* found one - only interested if it's shared out of the page
- * cache */
- if (vma->vm_flags & VM_SHARED)
- return -ETXTBSY; /* not quite true, but near enough */
- }
-
- return 0;
-}
-
/*****************************************************************************/
/*
*
/* check that a decrease in size doesn't cut off any shared mappings */
if (newsize < size) {
- ret = ramfs_nommu_check_mappings(inode, newsize, size);
+ ret = nommu_shrink_inode_mappings(inode, size, newsize);
if (ret < 0)
return ret;
}
struct reiserfs_bitmap_info *bitmap;
unsigned int bmap_nr = reiserfs_bmap_count(sb);
+ /* Avoid lock recursion in fault case */
+ reiserfs_write_unlock(sb);
bitmap = vmalloc(sizeof(*bitmap) * bmap_nr);
+ reiserfs_write_lock(sb);
if (bitmap == NULL)
return -ENOMEM;
JOURNAL_PER_BALANCE_CNT * 2 +
2 * REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb);
struct reiserfs_transaction_handle th;
+ int depth;
int err;
truncate_inode_pages(&inode->i_data, 0);
- reiserfs_write_lock(inode->i_sb);
+ depth = reiserfs_write_lock_once(inode->i_sb);
/* The = 0 happens when we abort creating a new inode for some reason like lack of space.. */
if (!(inode->i_state & I_NEW) && INODE_PKEY(inode)->k_objectid != 0) { /* also handles bad_inode case */
out:
clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */
inode->i_blocks = 0;
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
}
static void _make_cpu_key(struct cpu_key *key, int version, __u32 dirid,
int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
- int error;
unsigned int ia_valid;
+ int depth;
+ int error;
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
- reiserfs_write_lock(inode->i_sb);
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (attr->ia_valid & ATTR_SIZE) {
/* version 2 items will be caught by the s_maxbytes check
** done for us in vmtruncate
journal_end(&th, inode->i_sb, jbegin_count);
}
}
- if (!error)
+ if (!error) {
+ /*
+ * Relax the lock here, as it might truncate the
+ * inode pages and wait for inode pages locks.
+ * To release such page lock, the owner needs the
+ * reiserfs lock
+ */
+ reiserfs_write_unlock_once(inode->i_sb, depth);
error = inode_setattr(inode, attr);
+ depth = reiserfs_write_lock_once(inode->i_sb);
+ }
}
if (!error && reiserfs_posixacl(inode->i_sb)) {
}
out:
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
+
return error;
}
err = put_user(inode->i_generation, (int __user *)arg);
break;
case REISERFS_IOC_SETVERSION:
- if (!is_owner_or_cap(inode))
+ if (!is_owner_or_cap(inode)) {
err = -EPERM;
break;
+ }
err = mnt_want_write(filp->f_path.mnt);
if (err)
break;
destroy_workqueue(commit_wq);
commit_wq = NULL;
}
- reiserfs_write_lock(sb);
free_journal_ram(sb);
+ reiserfs_write_lock(sb);
+
return 0;
}
struct reiserfs_journal *journal;
struct reiserfs_journal_list *jl;
char b[BDEVNAME_SIZE];
+ int ret;
+ /*
+ * Unlock here to avoid various RECLAIM-FS-ON <-> IN-RECLAIM-FS
+ * dependency inversion warnings.
+ */
+ reiserfs_write_unlock(sb);
journal = SB_JOURNAL(sb) = vmalloc(sizeof(struct reiserfs_journal));
if (!journal) {
reiserfs_warning(sb, "journal-1256",
"unable to get memory for journal structure");
+ reiserfs_write_lock(sb);
return 1;
}
memset(journal, 0, sizeof(struct reiserfs_journal));
INIT_LIST_HEAD(&journal->j_working_list);
INIT_LIST_HEAD(&journal->j_journal_list);
journal->j_persistent_trans = 0;
- if (reiserfs_allocate_list_bitmaps(sb,
- journal->j_list_bitmap,
- reiserfs_bmap_count(sb)))
+ ret = reiserfs_allocate_list_bitmaps(sb, journal->j_list_bitmap,
+ reiserfs_bmap_count(sb));
+ reiserfs_write_lock(sb);
+ if (ret)
goto free_and_return;
+
allocate_bitmap_nodes(sb);
/* reserved for journal area support */
reiserfs_panic(sb, "%s called without kernel lock held %d",
caller);
}
+
+#ifdef CONFIG_REISERFS_CHECK
+void reiserfs_lock_check_recursive(struct super_block *sb)
+{
+ struct reiserfs_sb_info *sb_i = REISERFS_SB(sb);
+
+ WARN_ONCE((sb_i->lock_depth > 0), "Unwanted recursive reiserfs lock!\n");
+}
+#endif
struct reiserfs_transaction_handle th;
int jbegin_count;
unsigned long savelink;
+ int depth;
inode = dentry->d_inode;
JOURNAL_PER_BALANCE_CNT * 2 + 2 +
4 * REISERFS_QUOTA_TRANS_BLOCKS(dir->i_sb);
- reiserfs_write_lock(dir->i_sb);
+ depth = reiserfs_write_lock_once(dir->i_sb);
retval = journal_begin(&th, dir->i_sb, jbegin_count);
if (retval)
goto out_unlink;
retval = journal_end(&th, dir->i_sb, jbegin_count);
reiserfs_check_path(&path);
- reiserfs_write_unlock(dir->i_sb);
+ reiserfs_write_unlock_once(dir->i_sb, depth);
return retval;
end_unlink:
if (err)
retval = err;
out_unlink:
- reiserfs_write_unlock(dir->i_sb);
+ reiserfs_write_unlock_once(dir->i_sb, depth);
return retval;
}
BUG_ON(!mutex_is_locked(&dir->i_mutex));
vfs_dq_init(dir);
- mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+ reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex,
+ I_MUTEX_CHILD, dir->i_sb);
error = dir->i_op->unlink(dir, dentry);
mutex_unlock(&dentry->d_inode->i_mutex);
BUG_ON(!mutex_is_locked(&dir->i_mutex));
vfs_dq_init(dir);
- mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+ reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex,
+ I_MUTEX_CHILD, dir->i_sb);
dentry_unhash(dentry);
error = dir->i_op->rmdir(dir, dentry);
if (!error)
if (IS_PRIVATE(inode) || get_inode_sd_version(inode) == STAT_DATA_V1)
return 0;
+ reiserfs_write_unlock(inode->i_sb);
dir = open_xa_dir(inode, XATTR_REPLACE);
if (IS_ERR(dir)) {
err = PTR_ERR(dir);
+ reiserfs_write_lock(inode->i_sb);
goto out;
} else if (!dir->d_inode) {
err = 0;
+ reiserfs_write_lock(inode->i_sb);
goto out_dir;
}
mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_XATTR);
+
+ reiserfs_write_lock(inode->i_sb);
+
buf.xadir = dir;
err = reiserfs_readdir_dentry(dir, &buf, fill_with_dentries, &pos);
while ((err == 0 || err == -ENOSPC) && buf.count) {
err = journal_begin(&th, inode->i_sb, blocks);
if (!err) {
int jerror;
- mutex_lock_nested(&dir->d_parent->d_inode->i_mutex,
- I_MUTEX_XATTR);
+ reiserfs_mutex_lock_nested_safe(
+ &dir->d_parent->d_inode->i_mutex,
+ I_MUTEX_XATTR, inode->i_sb);
err = action(dir, data);
jerror = journal_end(&th, inode->i_sb, blocks);
mutex_unlock(&dir->d_parent->d_inode->i_mutex);
}
if (dentry->d_inode) {
+ reiserfs_write_lock(inode->i_sb);
err = xattr_unlink(xadir->d_inode, dentry);
+ reiserfs_write_unlock(inode->i_sb);
update_ctime(inode);
}
if (get_inode_sd_version(inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
- if (!buffer)
- return lookup_and_delete_xattr(inode, name);
+ reiserfs_write_unlock(inode->i_sb);
+
+ if (!buffer) {
+ err = lookup_and_delete_xattr(inode, name);
+ reiserfs_write_lock(inode->i_sb);
+ return err;
+ }
dentry = xattr_lookup(inode, name, flags);
- if (IS_ERR(dentry))
+ if (IS_ERR(dentry)) {
+ reiserfs_write_lock(inode->i_sb);
return PTR_ERR(dentry);
+ }
down_write(&REISERFS_I(inode)->i_xattr_sem);
+ reiserfs_write_lock(inode->i_sb);
+
xahash = xattr_hash(buffer, buffer_size);
while (buffer_pos < buffer_size || buffer_pos == 0) {
size_t chunk;
.ia_size = buffer_size,
.ia_valid = ATTR_SIZE | ATTR_CTIME,
};
+
+ reiserfs_write_unlock(inode->i_sb);
mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_XATTR);
down_write(&dentry->d_inode->i_alloc_sem);
+ reiserfs_write_lock(inode->i_sb);
+
err = reiserfs_setattr(dentry, &newattrs);
up_write(&dentry->d_inode->i_alloc_sem);
mutex_unlock(&dentry->d_inode->i_mutex);
return 0;
}
+ reiserfs_write_unlock(inode->i_sb);
acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS);
+ reiserfs_write_lock(inode->i_sb);
if (!acl)
return 0;
if (IS_ERR(acl))
error_rsb_inval:
ret = -EINVAL;
error_rsb:
+ kfree(rsb);
return ret;
}
return NULL;
t = atomic_cmpxchg(&sd->s_active, v, v + 1);
- if (likely(t == v))
+ if (likely(t == v)) {
+ rwsem_acquire_read(&sd->dep_map, 0, 1, _RET_IP_);
return sd;
+ }
if (t < 0)
return NULL;
if (unlikely(!sd))
return;
+ rwsem_release(&sd->dep_map, 1, _RET_IP_);
v = atomic_dec_return(&sd->s_active);
if (likely(v != SD_DEACTIVATED_BIAS))
return;
BUG_ON(sd->s_sibling || !(sd->s_flags & SYSFS_FLAG_REMOVED));
sd->s_sibling = (void *)&wait;
+ rwsem_acquire(&sd->dep_map, 0, 0, _RET_IP_);
/* atomic_add_return() is a mb(), put_active() will always see
* the updated sd->s_sibling.
*/
v = atomic_add_return(SD_DEACTIVATED_BIAS, &sd->s_active);
- if (v != SD_DEACTIVATED_BIAS)
+ if (v != SD_DEACTIVATED_BIAS) {
+ lock_contended(&sd->dep_map, _RET_IP_);
wait_for_completion(&wait);
+ }
sd->s_sibling = NULL;
+
+ lock_acquired(&sd->dep_map, _RET_IP_);
+ rwsem_release(&sd->dep_map, 1, _RET_IP_);
}
static int sysfs_alloc_ino(ino_t *pino)
atomic_set(&sd->s_count, 1);
atomic_set(&sd->s_active, 0);
+ sysfs_dirent_init_lockdep(sd);
sd->s_name = name;
sd->s_mode = mode;
* This file is released under the GPLv2.
*/
+#include <linux/lockdep.h>
#include <linux/fs.h>
struct sysfs_open_dirent;
struct sysfs_dirent {
atomic_t s_count;
atomic_t s_active;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ struct lockdep_map dep_map;
+#endif
struct sysfs_dirent *s_parent;
struct sysfs_dirent *s_sibling;
const char *s_name;
return sd->s_flags & SYSFS_TYPE_MASK;
}
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define sysfs_dirent_init_lockdep(sd) \
+do { \
+ static struct lock_class_key __key; \
+ \
+ lockdep_init_map(&sd->dep_map, "s_active", &__key, 0); \
+} while(0)
+#else
+#define sysfs_dirent_init_lockdep(sd) do {} while(0)
+#endif
+
/*
* Context structure to be used while adding/removing nodes.
*/
*/
#include <linux/pagemap.h>
+#include <linux/list_sort.h>
#include "ubifs.h"
/*
return err;
}
-/**
- * list_sort - sort a list.
- * @priv: private data, passed to @cmp
- * @head: the list to sort
- * @cmp: the elements comparison function
- *
- * This function has been implemented by Mark J Roberts <mjr@znex.org>. It
- * implements "merge sort" which has O(nlog(n)) complexity. The list is sorted
- * in ascending order.
- *
- * The comparison function @cmp is supposed to return a negative value if @a is
- * than @b, and a positive value if @a is greater than @b. If @a and @b are
- * equivalent, then it does not matter what this function returns.
- */
-static void list_sort(void *priv, struct list_head *head,
- int (*cmp)(void *priv, struct list_head *a,
- struct list_head *b))
-{
- struct list_head *p, *q, *e, *list, *tail, *oldhead;
- int insize, nmerges, psize, qsize, i;
-
- if (list_empty(head))
- return;
-
- list = head->next;
- list_del(head);
- insize = 1;
- for (;;) {
- p = oldhead = list;
- list = tail = NULL;
- nmerges = 0;
-
- while (p) {
- nmerges++;
- q = p;
- psize = 0;
- for (i = 0; i < insize; i++) {
- psize++;
- q = q->next == oldhead ? NULL : q->next;
- if (!q)
- break;
- }
-
- qsize = insize;
- while (psize > 0 || (qsize > 0 && q)) {
- if (!psize) {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- } else if (!qsize || !q) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else if (cmp(priv, p, q) <= 0) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- }
- if (tail)
- tail->next = e;
- else
- list = e;
- e->prev = tail;
- tail = e;
- }
- p = q;
- }
-
- tail->next = list;
- list->prev = tail;
-
- if (nmerges <= 1)
- break;
-
- insize *= 2;
- }
-
- head->next = list;
- head->prev = list->prev;
- list->prev->next = head;
- list->prev = head;
-}
-
/**
* data_nodes_cmp - compare 2 data nodes.
* @priv: UBIFS file-system description object
if (mode != inode->i_mode) {
struct iattr iattr;
- iattr.ia_valid = ATTR_MODE;
+ iattr.ia_valid = ATTR_MODE | ATTR_CTIME;
iattr.ia_mode = mode;
+ iattr.ia_ctime = current_fs_time(inode->i_sb);
error = -xfs_setattr(XFS_I(inode), &iattr, XFS_ATTR_NOACL);
}
ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIM));
/*
- * If we have nothing to flush with this inode then complete the
- * teardown now, otherwise delay the flush operation.
+ * We always use background reclaim here because even if the
+ * inode is clean, it still may be under IO and hence we have
+ * to take the flush lock. The background reclaim path handles
+ * this more efficiently than we can here, so simply let background
+ * reclaim tear down all inodes.
*/
- if (!xfs_inode_clean(ip)) {
- xfs_inode_set_reclaim_tag(ip);
- return;
- }
-
out_reclaim:
- xfs_ireclaim(ip);
+ xfs_inode_set_reclaim_tag(ip);
}
/*
* as the tree is sparse and a gang lookup walks to find
* the number of objects requested.
*/
- read_lock(&pag->pag_ici_lock);
if (tag == XFS_ICI_NO_TAG) {
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
(void **)&ip, *first_index, 1);
(void **)&ip, *first_index, 1, tag);
}
if (!nr_found)
- goto unlock;
+ return NULL;
/*
* Update the index for the next lookup. Catch overflows
*/
*first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
- goto unlock;
-
+ return NULL;
return ip;
-
-unlock:
- read_unlock(&pag->pag_ici_lock);
- return NULL;
}
STATIC int
int (*execute)(struct xfs_inode *ip,
struct xfs_perag *pag, int flags),
int flags,
- int tag)
+ int tag,
+ int exclusive)
{
struct xfs_perag *pag = &mp->m_perag[ag];
uint32_t first_index;
int error = 0;
xfs_inode_t *ip;
+ if (exclusive)
+ write_lock(&pag->pag_ici_lock);
+ else
+ read_lock(&pag->pag_ici_lock);
ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag);
- if (!ip)
+ if (!ip) {
+ if (exclusive)
+ write_unlock(&pag->pag_ici_lock);
+ else
+ read_unlock(&pag->pag_ici_lock);
break;
+ }
+ /* execute releases pag->pag_ici_lock */
error = execute(ip, pag, flags);
if (error == EAGAIN) {
skipped++;
}
if (error)
last_error = error;
- /*
- * bail out if the filesystem is corrupted.
- */
+
+ /* bail out if the filesystem is corrupted. */
if (error == EFSCORRUPTED)
break;
int (*execute)(struct xfs_inode *ip,
struct xfs_perag *pag, int flags),
int flags,
- int tag)
+ int tag,
+ int exclusive)
{
int error = 0;
int last_error = 0;
for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
if (!mp->m_perag[ag].pag_ici_init)
continue;
- error = xfs_inode_ag_walk(mp, ag, execute, flags, tag);
+ error = xfs_inode_ag_walk(mp, ag, execute, flags, tag,
+ exclusive);
if (error) {
last_error = error;
if (error == EFSCORRUPTED)
struct xfs_perag *pag)
{
struct inode *inode = VFS_I(ip);
+ int error = EFSCORRUPTED;
/* nothing to sync during shutdown */
- if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- read_unlock(&pag->pag_ici_lock);
- return EFSCORRUPTED;
- }
+ if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ goto out_unlock;
- /*
- * If we can't get a reference on the inode, it must be in reclaim.
- * Leave it for the reclaim code to flush. Also avoid inodes that
- * haven't been fully initialised.
- */
- if (!igrab(inode)) {
- read_unlock(&pag->pag_ici_lock);
- return ENOENT;
- }
- read_unlock(&pag->pag_ici_lock);
+ /* avoid new or reclaimable inodes. Leave for reclaim code to flush */
+ error = ENOENT;
+ if (xfs_iflags_test(ip, XFS_INEW | XFS_IRECLAIMABLE | XFS_IRECLAIM))
+ goto out_unlock;
- if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) {
+ /* If we can't grab the inode, it must on it's way to reclaim. */
+ if (!igrab(inode))
+ goto out_unlock;
+
+ if (is_bad_inode(inode)) {
IRELE(ip);
- return ENOENT;
+ goto out_unlock;
}
- return 0;
+ /* inode is valid */
+ error = 0;
+out_unlock:
+ read_unlock(&pag->pag_ici_lock);
+ return error;
}
STATIC int
ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
- XFS_ICI_NO_TAG);
+ XFS_ICI_NO_TAG, 0);
if (error)
return XFS_ERROR(error);
ASSERT((flags & ~SYNC_WAIT) == 0);
return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
- XFS_ICI_NO_TAG);
+ XFS_ICI_NO_TAG, 0);
}
STATIC int
kthread_stop(mp->m_sync_task);
}
-STATIC int
-xfs_reclaim_inode(
- xfs_inode_t *ip,
- int sync_mode)
-{
- xfs_perag_t *pag = xfs_get_perag(ip->i_mount, ip->i_ino);
-
- /* The hash lock here protects a thread in xfs_iget_core from
- * racing with us on linking the inode back with a vnode.
- * Once we have the XFS_IRECLAIM flag set it will not touch
- * us.
- */
- write_lock(&pag->pag_ici_lock);
- spin_lock(&ip->i_flags_lock);
- if (__xfs_iflags_test(ip, XFS_IRECLAIM) ||
- !__xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
- spin_unlock(&ip->i_flags_lock);
- write_unlock(&pag->pag_ici_lock);
- return -EAGAIN;
- }
- __xfs_iflags_set(ip, XFS_IRECLAIM);
- spin_unlock(&ip->i_flags_lock);
- write_unlock(&pag->pag_ici_lock);
- xfs_put_perag(ip->i_mount, pag);
-
- /*
- * If the inode is still dirty, then flush it out. If the inode
- * is not in the AIL, then it will be OK to flush it delwri as
- * long as xfs_iflush() does not keep any references to the inode.
- * We leave that decision up to xfs_iflush() since it has the
- * knowledge of whether it's OK to simply do a delwri flush of
- * the inode or whether we need to wait until the inode is
- * pulled from the AIL.
- * We get the flush lock regardless, though, just to make sure
- * we don't free it while it is being flushed.
- */
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_iflock(ip);
-
- /*
- * In the case of a forced shutdown we rely on xfs_iflush() to
- * wait for the inode to be unpinned before returning an error.
- */
- if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
- /* synchronize with xfs_iflush_done */
- xfs_iflock(ip);
- xfs_ifunlock(ip);
- }
-
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_ireclaim(ip);
- return 0;
-}
-
void
__xfs_inode_set_reclaim_tag(
struct xfs_perag *pag,
}
STATIC int
-xfs_reclaim_inode_now(
+xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
- int flags)
+ int sync_mode)
{
- /* ignore if already under reclaim */
- if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
- read_unlock(&pag->pag_ici_lock);
+ /*
+ * The radix tree lock here protects a thread in xfs_iget from racing
+ * with us starting reclaim on the inode. Once we have the
+ * XFS_IRECLAIM flag set it will not touch us.
+ */
+ spin_lock(&ip->i_flags_lock);
+ ASSERT_ALWAYS(__xfs_iflags_test(ip, XFS_IRECLAIMABLE));
+ if (__xfs_iflags_test(ip, XFS_IRECLAIM)) {
+ /* ignore as it is already under reclaim */
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
return 0;
}
- read_unlock(&pag->pag_ici_lock);
+ __xfs_iflags_set(ip, XFS_IRECLAIM);
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
- return xfs_reclaim_inode(ip, flags);
+ /*
+ * If the inode is still dirty, then flush it out. If the inode
+ * is not in the AIL, then it will be OK to flush it delwri as
+ * long as xfs_iflush() does not keep any references to the inode.
+ * We leave that decision up to xfs_iflush() since it has the
+ * knowledge of whether it's OK to simply do a delwri flush of
+ * the inode or whether we need to wait until the inode is
+ * pulled from the AIL.
+ * We get the flush lock regardless, though, just to make sure
+ * we don't free it while it is being flushed.
+ */
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ xfs_iflock(ip);
+
+ /*
+ * In the case of a forced shutdown we rely on xfs_iflush() to
+ * wait for the inode to be unpinned before returning an error.
+ */
+ if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
+ /* synchronize with xfs_iflush_done */
+ xfs_iflock(ip);
+ xfs_ifunlock(ip);
+ }
+
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_ireclaim(ip);
+ return 0;
}
int
xfs_mount_t *mp,
int mode)
{
- return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode,
- XFS_ICI_RECLAIM_TAG);
+ return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode,
+ XFS_ICI_RECLAIM_TAG, 1);
}
int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
int xfs_inode_ag_iterator(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
- int flags, int tag);
+ int flags, int tag, int write_lock);
#endif
struct xlog_ticket;
struct log;
+DECLARE_EVENT_CLASS(xfs_attr_list_class,
+ TP_PROTO(struct xfs_attr_list_context *ctx),
+ TP_ARGS(ctx),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(u32, hashval)
+ __field(u32, blkno)
+ __field(u32, offset)
+ __field(void *, alist)
+ __field(int, bufsize)
+ __field(int, count)
+ __field(int, firstu)
+ __field(int, dupcnt)
+ __field(int, flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ctx->dp)->i_sb->s_dev;
+ __entry->ino = ctx->dp->i_ino;
+ __entry->hashval = ctx->cursor->hashval;
+ __entry->blkno = ctx->cursor->blkno;
+ __entry->offset = ctx->cursor->offset;
+ __entry->alist = ctx->alist;
+ __entry->bufsize = ctx->bufsize;
+ __entry->count = ctx->count;
+ __entry->firstu = ctx->firstu;
+ __entry->flags = ctx->flags;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx cursor h/b/o 0x%x/0x%x/%u dupcnt %u "
+ "alist 0x%p size %u count %u firstu %u flags %d %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->hashval,
+ __entry->blkno,
+ __entry->offset,
+ __entry->dupcnt,
+ __entry->alist,
+ __entry->bufsize,
+ __entry->count,
+ __entry->firstu,
+ __entry->flags,
+ __print_flags(__entry->flags, "|", XFS_ATTR_FLAGS)
+ )
+)
+
#define DEFINE_ATTR_LIST_EVENT(name) \
-TRACE_EVENT(name, \
+DEFINE_EVENT(xfs_attr_list_class, name, \
TP_PROTO(struct xfs_attr_list_context *ctx), \
- TP_ARGS(ctx), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(u32, hashval) \
- __field(u32, blkno) \
- __field(u32, offset) \
- __field(void *, alist) \
- __field(int, bufsize) \
- __field(int, count) \
- __field(int, firstu) \
- __field(int, dupcnt) \
- __field(int, flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ctx->dp)->i_sb->s_dev; \
- __entry->ino = ctx->dp->i_ino; \
- __entry->hashval = ctx->cursor->hashval; \
- __entry->blkno = ctx->cursor->blkno; \
- __entry->offset = ctx->cursor->offset; \
- __entry->alist = ctx->alist; \
- __entry->bufsize = ctx->bufsize; \
- __entry->count = ctx->count; \
- __entry->firstu = ctx->firstu; \
- __entry->flags = ctx->flags; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx cursor h/b/o 0x%x/0x%x/%u dupcnt %u " \
- "alist 0x%p size %u count %u firstu %u flags %d %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->hashval, \
- __entry->blkno, \
- __entry->offset, \
- __entry->dupcnt, \
- __entry->alist, \
- __entry->bufsize, \
- __entry->count, \
- __entry->firstu, \
- __entry->flags, \
- __print_flags(__entry->flags, "|", XFS_ATTR_FLAGS) \
- ) \
-)
+ TP_ARGS(ctx))
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_sf);
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_sf_all);
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_leaf);
(char *)__entry->caller_ip)
);
+DECLARE_EVENT_CLASS(xfs_bmap_class,
+ TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state,
+ unsigned long caller_ip),
+ TP_ARGS(ip, idx, state, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(xfs_extnum_t, idx)
+ __field(xfs_fileoff_t, startoff)
+ __field(xfs_fsblock_t, startblock)
+ __field(xfs_filblks_t, blockcount)
+ __field(xfs_exntst_t, state)
+ __field(int, bmap_state)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ struct xfs_ifork *ifp = (state & BMAP_ATTRFORK) ?
+ ip->i_afp : &ip->i_df;
+ struct xfs_bmbt_irec r;
+
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx), &r);
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->idx = idx;
+ __entry->startoff = r.br_startoff;
+ __entry->startblock = r.br_startblock;
+ __entry->blockcount = r.br_blockcount;
+ __entry->state = r.br_state;
+ __entry->bmap_state = state;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx state %s idx %ld "
+ "offset %lld block %s count %lld flag %d caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __print_flags(__entry->bmap_state, "|", XFS_BMAP_EXT_FLAGS),
+ (long)__entry->idx,
+ __entry->startoff,
+ xfs_fmtfsblock(__entry->startblock),
+ __entry->blockcount,
+ __entry->state,
+ (char *)__entry->caller_ip)
+)
+
#define DEFINE_BMAP_EVENT(name) \
-TRACE_EVENT(name, \
+DEFINE_EVENT(xfs_bmap_class, name, \
TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state, \
unsigned long caller_ip), \
- TP_ARGS(ip, idx, state, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(xfs_extnum_t, idx) \
- __field(xfs_fileoff_t, startoff) \
- __field(xfs_fsblock_t, startblock) \
- __field(xfs_filblks_t, blockcount) \
- __field(xfs_exntst_t, state) \
- __field(int, bmap_state) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- struct xfs_ifork *ifp = (state & BMAP_ATTRFORK) ? \
- ip->i_afp : &ip->i_df; \
- struct xfs_bmbt_irec r; \
- \
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx), &r); \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->idx = idx; \
- __entry->startoff = r.br_startoff; \
- __entry->startblock = r.br_startblock; \
- __entry->blockcount = r.br_blockcount; \
- __entry->state = r.br_state; \
- __entry->bmap_state = state; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx state %s idx %ld " \
- "offset %lld block %s count %lld flag %d caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __print_flags(__entry->bmap_state, "|", XFS_BMAP_EXT_FLAGS), \
- (long)__entry->idx, \
- __entry->startoff, \
- xfs_fmtfsblock(__entry->startblock), \
- __entry->blockcount, \
- __entry->state, \
- (char *)__entry->caller_ip) \
-)
-
+ TP_ARGS(ip, idx, state, caller_ip))
DEFINE_BMAP_EVENT(xfs_iext_remove);
DEFINE_BMAP_EVENT(xfs_bmap_pre_update);
DEFINE_BMAP_EVENT(xfs_bmap_post_update);
DEFINE_BMAP_EVENT(xfs_extlist);
-#define DEFINE_BUF_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), \
- TP_ARGS(bp, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_daddr_t, bno) \
- __field(size_t, buffer_length) \
- __field(int, hold) \
- __field(int, pincount) \
- __field(unsigned, lockval) \
- __field(unsigned, flags) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = bp->b_target->bt_dev; \
- __entry->bno = bp->b_bn; \
- __entry->buffer_length = bp->b_buffer_length; \
- __entry->hold = atomic_read(&bp->b_hold); \
- __entry->pincount = atomic_read(&bp->b_pin_count); \
- __entry->lockval = xfs_buf_lock_value(bp); \
- __entry->flags = bp->b_flags; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \
- "lock %d flags %s caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- (unsigned long long)__entry->bno, \
- __entry->buffer_length, \
- __entry->hold, \
- __entry->pincount, \
- __entry->lockval, \
- __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), \
- (void *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_buf_class,
+ TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip),
+ TP_ARGS(bp, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_daddr_t, bno)
+ __field(size_t, buffer_length)
+ __field(int, hold)
+ __field(int, pincount)
+ __field(unsigned, lockval)
+ __field(unsigned, flags)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = bp->b_target->bt_dev;
+ __entry->bno = bp->b_bn;
+ __entry->buffer_length = bp->b_buffer_length;
+ __entry->hold = atomic_read(&bp->b_hold);
+ __entry->pincount = atomic_read(&bp->b_pin_count);
+ __entry->lockval = xfs_buf_lock_value(bp);
+ __entry->flags = bp->b_flags;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d "
+ "lock %d flags %s caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->bno,
+ __entry->buffer_length,
+ __entry->hold,
+ __entry->pincount,
+ __entry->lockval,
+ __print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
+ (void *)__entry->caller_ip)
)
+
+#define DEFINE_BUF_EVENT(name) \
+DEFINE_EVENT(xfs_buf_class, name, \
+ TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), \
+ TP_ARGS(bp, caller_ip))
DEFINE_BUF_EVENT(xfs_buf_init);
DEFINE_BUF_EVENT(xfs_buf_free);
DEFINE_BUF_EVENT(xfs_buf_hold);
DEFINE_BUF_EVENT(xfs_inode_item_push);
/* pass flags explicitly */
-#define DEFINE_BUF_FLAGS_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), \
- TP_ARGS(bp, flags, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_daddr_t, bno) \
- __field(size_t, buffer_length) \
- __field(int, hold) \
- __field(int, pincount) \
- __field(unsigned, lockval) \
- __field(unsigned, flags) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = bp->b_target->bt_dev; \
- __entry->bno = bp->b_bn; \
- __entry->buffer_length = bp->b_buffer_length; \
- __entry->flags = flags; \
- __entry->hold = atomic_read(&bp->b_hold); \
- __entry->pincount = atomic_read(&bp->b_pin_count); \
- __entry->lockval = xfs_buf_lock_value(bp); \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \
- "lock %d flags %s caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- (unsigned long long)__entry->bno, \
- __entry->buffer_length, \
- __entry->hold, \
- __entry->pincount, \
- __entry->lockval, \
- __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), \
- (void *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_buf_flags_class,
+ TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip),
+ TP_ARGS(bp, flags, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_daddr_t, bno)
+ __field(size_t, buffer_length)
+ __field(int, hold)
+ __field(int, pincount)
+ __field(unsigned, lockval)
+ __field(unsigned, flags)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = bp->b_target->bt_dev;
+ __entry->bno = bp->b_bn;
+ __entry->buffer_length = bp->b_buffer_length;
+ __entry->flags = flags;
+ __entry->hold = atomic_read(&bp->b_hold);
+ __entry->pincount = atomic_read(&bp->b_pin_count);
+ __entry->lockval = xfs_buf_lock_value(bp);
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d "
+ "lock %d flags %s caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->bno,
+ __entry->buffer_length,
+ __entry->hold,
+ __entry->pincount,
+ __entry->lockval,
+ __print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
+ (void *)__entry->caller_ip)
)
+
+#define DEFINE_BUF_FLAGS_EVENT(name) \
+DEFINE_EVENT(xfs_buf_flags_class, name, \
+ TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), \
+ TP_ARGS(bp, flags, caller_ip))
DEFINE_BUF_FLAGS_EVENT(xfs_buf_find);
DEFINE_BUF_FLAGS_EVENT(xfs_buf_get);
DEFINE_BUF_FLAGS_EVENT(xfs_buf_read);
(void *)__entry->caller_ip)
);
-#define DEFINE_BUF_ITEM_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_buf_log_item *bip), \
- TP_ARGS(bip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_daddr_t, buf_bno) \
- __field(size_t, buf_len) \
- __field(int, buf_hold) \
- __field(int, buf_pincount) \
- __field(int, buf_lockval) \
- __field(unsigned, buf_flags) \
- __field(unsigned, bli_recur) \
- __field(int, bli_refcount) \
- __field(unsigned, bli_flags) \
- __field(void *, li_desc) \
- __field(unsigned, li_flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = bip->bli_buf->b_target->bt_dev; \
- __entry->bli_flags = bip->bli_flags; \
- __entry->bli_recur = bip->bli_recur; \
- __entry->bli_refcount = atomic_read(&bip->bli_refcount); \
- __entry->buf_bno = bip->bli_buf->b_bn; \
- __entry->buf_len = bip->bli_buf->b_buffer_length; \
- __entry->buf_flags = bip->bli_buf->b_flags; \
- __entry->buf_hold = atomic_read(&bip->bli_buf->b_hold); \
- __entry->buf_pincount = \
- atomic_read(&bip->bli_buf->b_pin_count); \
- __entry->buf_lockval = xfs_buf_lock_value(bip->bli_buf); \
- __entry->li_desc = bip->bli_item.li_desc; \
- __entry->li_flags = bip->bli_item.li_flags; \
- ), \
- TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \
- "lock %d flags %s recur %d refcount %d bliflags %s " \
- "lidesc 0x%p liflags %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- (unsigned long long)__entry->buf_bno, \
- __entry->buf_len, \
- __entry->buf_hold, \
- __entry->buf_pincount, \
- __entry->buf_lockval, \
- __print_flags(__entry->buf_flags, "|", XFS_BUF_FLAGS), \
- __entry->bli_recur, \
- __entry->bli_refcount, \
- __print_flags(__entry->bli_flags, "|", XFS_BLI_FLAGS), \
- __entry->li_desc, \
- __print_flags(__entry->li_flags, "|", XFS_LI_FLAGS)) \
+DECLARE_EVENT_CLASS(xfs_buf_item_class,
+ TP_PROTO(struct xfs_buf_log_item *bip),
+ TP_ARGS(bip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_daddr_t, buf_bno)
+ __field(size_t, buf_len)
+ __field(int, buf_hold)
+ __field(int, buf_pincount)
+ __field(int, buf_lockval)
+ __field(unsigned, buf_flags)
+ __field(unsigned, bli_recur)
+ __field(int, bli_refcount)
+ __field(unsigned, bli_flags)
+ __field(void *, li_desc)
+ __field(unsigned, li_flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = bip->bli_buf->b_target->bt_dev;
+ __entry->bli_flags = bip->bli_flags;
+ __entry->bli_recur = bip->bli_recur;
+ __entry->bli_refcount = atomic_read(&bip->bli_refcount);
+ __entry->buf_bno = bip->bli_buf->b_bn;
+ __entry->buf_len = bip->bli_buf->b_buffer_length;
+ __entry->buf_flags = bip->bli_buf->b_flags;
+ __entry->buf_hold = atomic_read(&bip->bli_buf->b_hold);
+ __entry->buf_pincount = atomic_read(&bip->bli_buf->b_pin_count);
+ __entry->buf_lockval = xfs_buf_lock_value(bip->bli_buf);
+ __entry->li_desc = bip->bli_item.li_desc;
+ __entry->li_flags = bip->bli_item.li_flags;
+ ),
+ TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d "
+ "lock %d flags %s recur %d refcount %d bliflags %s "
+ "lidesc 0x%p liflags %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->buf_bno,
+ __entry->buf_len,
+ __entry->buf_hold,
+ __entry->buf_pincount,
+ __entry->buf_lockval,
+ __print_flags(__entry->buf_flags, "|", XFS_BUF_FLAGS),
+ __entry->bli_recur,
+ __entry->bli_refcount,
+ __print_flags(__entry->bli_flags, "|", XFS_BLI_FLAGS),
+ __entry->li_desc,
+ __print_flags(__entry->li_flags, "|", XFS_LI_FLAGS))
)
+
+#define DEFINE_BUF_ITEM_EVENT(name) \
+DEFINE_EVENT(xfs_buf_item_class, name, \
+ TP_PROTO(struct xfs_buf_log_item *bip), \
+ TP_ARGS(bip))
DEFINE_BUF_ITEM_EVENT(xfs_buf_item_size);
DEFINE_BUF_ITEM_EVENT(xfs_buf_item_size_stale);
DEFINE_BUF_ITEM_EVENT(xfs_buf_item_format);
DEFINE_BUF_ITEM_EVENT(xfs_trans_bhold_release);
DEFINE_BUF_ITEM_EVENT(xfs_trans_binval);
+DECLARE_EVENT_CLASS(xfs_lock_class,
+ TP_PROTO(struct xfs_inode *ip, unsigned lock_flags,
+ unsigned long caller_ip),
+ TP_ARGS(ip, lock_flags, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(int, lock_flags)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->lock_flags = lock_flags;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx flags %s caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __print_flags(__entry->lock_flags, "|", XFS_LOCK_FLAGS),
+ (void *)__entry->caller_ip)
+)
+
#define DEFINE_LOCK_EVENT(name) \
-TRACE_EVENT(name, \
+DEFINE_EVENT(xfs_lock_class, name, \
TP_PROTO(struct xfs_inode *ip, unsigned lock_flags, \
unsigned long caller_ip), \
- TP_ARGS(ip, lock_flags, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(int, lock_flags) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->lock_flags = lock_flags; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx flags %s caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __print_flags(__entry->lock_flags, "|", XFS_LOCK_FLAGS), \
- (void *)__entry->caller_ip) \
-)
-
+ TP_ARGS(ip, lock_flags, caller_ip))
DEFINE_LOCK_EVENT(xfs_ilock);
DEFINE_LOCK_EVENT(xfs_ilock_nowait);
DEFINE_LOCK_EVENT(xfs_ilock_demote);
DEFINE_LOCK_EVENT(xfs_iunlock);
+DECLARE_EVENT_CLASS(xfs_iget_class,
+ TP_PROTO(struct xfs_inode *ip),
+ TP_ARGS(ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino)
+)
+
#define DEFINE_IGET_EVENT(name) \
-TRACE_EVENT(name, \
+DEFINE_EVENT(xfs_iget_class, name, \
TP_PROTO(struct xfs_inode *ip), \
- TP_ARGS(ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino) \
-)
+ TP_ARGS(ip))
DEFINE_IGET_EVENT(xfs_iget_skip);
DEFINE_IGET_EVENT(xfs_iget_reclaim);
DEFINE_IGET_EVENT(xfs_iget_found);
DEFINE_IGET_EVENT(xfs_iget_alloc);
+DECLARE_EVENT_CLASS(xfs_inode_class,
+ TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip),
+ TP_ARGS(ip, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(int, count)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->count = atomic_read(&VFS_I(ip)->i_count);
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx count %d caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->count,
+ (char *)__entry->caller_ip)
+)
+
#define DEFINE_INODE_EVENT(name) \
-TRACE_EVENT(name, \
+DEFINE_EVENT(xfs_inode_class, name, \
TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \
- TP_ARGS(ip, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(int, count) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->count = atomic_read(&VFS_I(ip)->i_count); \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx count %d caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->count, \
- (char *)__entry->caller_ip) \
-)
+ TP_ARGS(ip, caller_ip))
DEFINE_INODE_EVENT(xfs_ihold);
DEFINE_INODE_EVENT(xfs_irele);
/* the old xfs_itrace_entry tracer - to be replaced by s.th. in the VFS */
#define xfs_itrace_entry(ip) \
trace_xfs_inode(ip, _THIS_IP_)
-#define DEFINE_DQUOT_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_dquot *dqp), \
- TP_ARGS(dqp), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(__be32, id) \
- __field(unsigned, flags) \
- __field(unsigned, nrefs) \
- __field(unsigned long long, res_bcount) \
- __field(unsigned long long, bcount) \
- __field(unsigned long long, icount) \
- __field(unsigned long long, blk_hardlimit) \
- __field(unsigned long long, blk_softlimit) \
- __field(unsigned long long, ino_hardlimit) \
- __field(unsigned long long, ino_softlimit) \
- ), \
- TP_fast_assign( \
- __entry->dev = dqp->q_mount->m_super->s_dev; \
- __entry->id = dqp->q_core.d_id; \
- __entry->flags = dqp->dq_flags; \
- __entry->nrefs = dqp->q_nrefs; \
- __entry->res_bcount = dqp->q_res_bcount; \
- __entry->bcount = be64_to_cpu(dqp->q_core.d_bcount); \
- __entry->icount = be64_to_cpu(dqp->q_core.d_icount); \
- __entry->blk_hardlimit = \
- be64_to_cpu(dqp->q_core.d_blk_hardlimit); \
- __entry->blk_softlimit = \
- be64_to_cpu(dqp->q_core.d_blk_softlimit); \
- __entry->ino_hardlimit = \
- be64_to_cpu(dqp->q_core.d_ino_hardlimit); \
- __entry->ino_softlimit = \
- be64_to_cpu(dqp->q_core.d_ino_softlimit); \
+DECLARE_EVENT_CLASS(xfs_dquot_class,
+ TP_PROTO(struct xfs_dquot *dqp),
+ TP_ARGS(dqp),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(__be32, id)
+ __field(unsigned, flags)
+ __field(unsigned, nrefs)
+ __field(unsigned long long, res_bcount)
+ __field(unsigned long long, bcount)
+ __field(unsigned long long, icount)
+ __field(unsigned long long, blk_hardlimit)
+ __field(unsigned long long, blk_softlimit)
+ __field(unsigned long long, ino_hardlimit)
+ __field(unsigned long long, ino_softlimit)
), \
- TP_printk("dev %d:%d id 0x%x flags %s nrefs %u res_bc 0x%llx " \
- "bcnt 0x%llx [hard 0x%llx | soft 0x%llx] " \
- "icnt 0x%llx [hard 0x%llx | soft 0x%llx]", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- be32_to_cpu(__entry->id), \
- __print_flags(__entry->flags, "|", XFS_DQ_FLAGS), \
- __entry->nrefs, \
- __entry->res_bcount, \
- __entry->bcount, \
- __entry->blk_hardlimit, \
- __entry->blk_softlimit, \
- __entry->icount, \
- __entry->ino_hardlimit, \
- __entry->ino_softlimit) \
+ TP_fast_assign(
+ __entry->dev = dqp->q_mount->m_super->s_dev;
+ __entry->id = dqp->q_core.d_id;
+ __entry->flags = dqp->dq_flags;
+ __entry->nrefs = dqp->q_nrefs;
+ __entry->res_bcount = dqp->q_res_bcount;
+ __entry->bcount = be64_to_cpu(dqp->q_core.d_bcount);
+ __entry->icount = be64_to_cpu(dqp->q_core.d_icount);
+ __entry->blk_hardlimit =
+ be64_to_cpu(dqp->q_core.d_blk_hardlimit);
+ __entry->blk_softlimit =
+ be64_to_cpu(dqp->q_core.d_blk_softlimit);
+ __entry->ino_hardlimit =
+ be64_to_cpu(dqp->q_core.d_ino_hardlimit);
+ __entry->ino_softlimit =
+ be64_to_cpu(dqp->q_core.d_ino_softlimit);
+ ),
+ TP_printk("dev %d:%d id 0x%x flags %s nrefs %u res_bc 0x%llx "
+ "bcnt 0x%llx [hard 0x%llx | soft 0x%llx] "
+ "icnt 0x%llx [hard 0x%llx | soft 0x%llx]",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ be32_to_cpu(__entry->id),
+ __print_flags(__entry->flags, "|", XFS_DQ_FLAGS),
+ __entry->nrefs,
+ __entry->res_bcount,
+ __entry->bcount,
+ __entry->blk_hardlimit,
+ __entry->blk_softlimit,
+ __entry->icount,
+ __entry->ino_hardlimit,
+ __entry->ino_softlimit)
)
+
+#define DEFINE_DQUOT_EVENT(name) \
+DEFINE_EVENT(xfs_dquot_class, name, \
+ TP_PROTO(struct xfs_dquot *dqp), \
+ TP_ARGS(dqp))
DEFINE_DQUOT_EVENT(xfs_dqadjust);
DEFINE_DQUOT_EVENT(xfs_dqshake_dirty);
DEFINE_DQUOT_EVENT(xfs_dqshake_unlink);
DEFINE_IGET_EVENT(xfs_dquot_dqalloc);
DEFINE_IGET_EVENT(xfs_dquot_dqdetach);
+DECLARE_EVENT_CLASS(xfs_loggrant_class,
+ TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_ARGS(log, tic),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(unsigned, trans_type)
+ __field(char, ocnt)
+ __field(char, cnt)
+ __field(int, curr_res)
+ __field(int, unit_res)
+ __field(unsigned int, flags)
+ __field(void *, reserve_headq)
+ __field(void *, write_headq)
+ __field(int, grant_reserve_cycle)
+ __field(int, grant_reserve_bytes)
+ __field(int, grant_write_cycle)
+ __field(int, grant_write_bytes)
+ __field(int, curr_cycle)
+ __field(int, curr_block)
+ __field(xfs_lsn_t, tail_lsn)
+ ),
+ TP_fast_assign(
+ __entry->dev = log->l_mp->m_super->s_dev;
+ __entry->trans_type = tic->t_trans_type;
+ __entry->ocnt = tic->t_ocnt;
+ __entry->cnt = tic->t_cnt;
+ __entry->curr_res = tic->t_curr_res;
+ __entry->unit_res = tic->t_unit_res;
+ __entry->flags = tic->t_flags;
+ __entry->reserve_headq = log->l_reserve_headq;
+ __entry->write_headq = log->l_write_headq;
+ __entry->grant_reserve_cycle = log->l_grant_reserve_cycle;
+ __entry->grant_reserve_bytes = log->l_grant_reserve_bytes;
+ __entry->grant_write_cycle = log->l_grant_write_cycle;
+ __entry->grant_write_bytes = log->l_grant_write_bytes;
+ __entry->curr_cycle = log->l_curr_cycle;
+ __entry->curr_block = log->l_curr_block;
+ __entry->tail_lsn = log->l_tail_lsn;
+ ),
+ TP_printk("dev %d:%d type %s t_ocnt %u t_cnt %u t_curr_res %u "
+ "t_unit_res %u t_flags %s reserve_headq 0x%p "
+ "write_headq 0x%p grant_reserve_cycle %d "
+ "grant_reserve_bytes %d grant_write_cycle %d "
+ "grant_write_bytes %d curr_cycle %d curr_block %d "
+ "tail_cycle %d tail_block %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __print_symbolic(__entry->trans_type, XFS_TRANS_TYPES),
+ __entry->ocnt,
+ __entry->cnt,
+ __entry->curr_res,
+ __entry->unit_res,
+ __print_flags(__entry->flags, "|", XLOG_TIC_FLAGS),
+ __entry->reserve_headq,
+ __entry->write_headq,
+ __entry->grant_reserve_cycle,
+ __entry->grant_reserve_bytes,
+ __entry->grant_write_cycle,
+ __entry->grant_write_bytes,
+ __entry->curr_cycle,
+ __entry->curr_block,
+ CYCLE_LSN(__entry->tail_lsn),
+ BLOCK_LSN(__entry->tail_lsn)
+ )
+)
-#define DEFINE_LOGGRANT_EVENT(tname) \
-TRACE_EVENT(tname, \
+#define DEFINE_LOGGRANT_EVENT(name) \
+DEFINE_EVENT(xfs_loggrant_class, name, \
TP_PROTO(struct log *log, struct xlog_ticket *tic), \
- TP_ARGS(log, tic), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(unsigned, trans_type) \
- __field(char, ocnt) \
- __field(char, cnt) \
- __field(int, curr_res) \
- __field(int, unit_res) \
- __field(unsigned int, flags) \
- __field(void *, reserve_headq) \
- __field(void *, write_headq) \
- __field(int, grant_reserve_cycle) \
- __field(int, grant_reserve_bytes) \
- __field(int, grant_write_cycle) \
- __field(int, grant_write_bytes) \
- __field(int, curr_cycle) \
- __field(int, curr_block) \
- __field(xfs_lsn_t, tail_lsn) \
- ), \
- TP_fast_assign( \
- __entry->dev = log->l_mp->m_super->s_dev; \
- __entry->trans_type = tic->t_trans_type; \
- __entry->ocnt = tic->t_ocnt; \
- __entry->cnt = tic->t_cnt; \
- __entry->curr_res = tic->t_curr_res; \
- __entry->unit_res = tic->t_unit_res; \
- __entry->flags = tic->t_flags; \
- __entry->reserve_headq = log->l_reserve_headq; \
- __entry->write_headq = log->l_write_headq; \
- __entry->grant_reserve_cycle = log->l_grant_reserve_cycle; \
- __entry->grant_reserve_bytes = log->l_grant_reserve_bytes; \
- __entry->grant_write_cycle = log->l_grant_write_cycle; \
- __entry->grant_write_bytes = log->l_grant_write_bytes; \
- __entry->curr_cycle = log->l_curr_cycle; \
- __entry->curr_block = log->l_curr_block; \
- __entry->tail_lsn = log->l_tail_lsn; \
- ), \
- TP_printk("dev %d:%d type %s t_ocnt %u t_cnt %u t_curr_res %u " \
- "t_unit_res %u t_flags %s reserve_headq 0x%p " \
- "write_headq 0x%p grant_reserve_cycle %d " \
- "grant_reserve_bytes %d grant_write_cycle %d " \
- "grant_write_bytes %d curr_cycle %d curr_block %d " \
- "tail_cycle %d tail_block %d", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __print_symbolic(__entry->trans_type, XFS_TRANS_TYPES), \
- __entry->ocnt, \
- __entry->cnt, \
- __entry->curr_res, \
- __entry->unit_res, \
- __print_flags(__entry->flags, "|", XLOG_TIC_FLAGS), \
- __entry->reserve_headq, \
- __entry->write_headq, \
- __entry->grant_reserve_cycle, \
- __entry->grant_reserve_bytes, \
- __entry->grant_write_cycle, \
- __entry->grant_write_bytes, \
- __entry->curr_cycle, \
- __entry->curr_block, \
- CYCLE_LSN(__entry->tail_lsn), \
- BLOCK_LSN(__entry->tail_lsn) \
- ) \
-)
+ TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
DEFINE_LOGGRANT_EVENT(xfs_log_reserve);
), \
TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
"offset 0x%llx count %zd flags %s " \
- "startoff 0x%llx startblock 0x%llx blockcount 0x%llx", \
+ "startoff 0x%llx startblock %s blockcount 0x%llx", \
MAJOR(__entry->dev), MINOR(__entry->dev), \
__entry->ino, \
__entry->size, \
__entry->count, \
__print_flags(__entry->flags, "|", BMAPI_FLAGS), \
__entry->startoff, \
- __entry->startblock, \
+ xfs_fmtfsblock(__entry->startblock), \
__entry->blockcount) \
)
DEFINE_IOMAP_EVENT(xfs_iomap_enter);
__entry->toss_finish)
);
+DECLARE_EVENT_CLASS(xfs_itrunc_class,
+ TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size),
+ TP_ARGS(ip, new_size),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(xfs_fsize_t, size)
+ __field(xfs_fsize_t, new_size)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->size = ip->i_d.di_size;
+ __entry->new_size = new_size;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->size,
+ __entry->new_size)
+)
+
#define DEFINE_ITRUNC_EVENT(name) \
-TRACE_EVENT(name, \
+DEFINE_EVENT(xfs_itrunc_class, name, \
TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size), \
- TP_ARGS(ip, new_size), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(xfs_fsize_t, size) \
- __field(xfs_fsize_t, new_size) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->size = ip->i_d.di_size; \
- __entry->new_size = new_size; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->size, \
- __entry->new_size) \
-)
+ TP_ARGS(ip, new_size))
DEFINE_ITRUNC_EVENT(xfs_itruncate_finish_start);
DEFINE_ITRUNC_EVENT(xfs_itruncate_finish_end);
TRACE_EVENT(xfs_alloc_busysearch,
TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, xfs_agblock_t agbno,
- xfs_extlen_t len, int found),
- TP_ARGS(mp, agno, agbno, len, found),
+ xfs_extlen_t len, xfs_lsn_t lsn),
+ TP_ARGS(mp, agno, agbno, len, lsn),
TP_STRUCT__entry(
__field(dev_t, dev)
__field(xfs_agnumber_t, agno)
__field(xfs_agblock_t, agbno)
__field(xfs_extlen_t, len)
- __field(int, found)
+ __field(xfs_lsn_t, lsn)
),
TP_fast_assign(
__entry->dev = mp->m_super->s_dev;
__entry->agno = agno;
__entry->agbno = agbno;
__entry->len = len;
- __entry->found = found;
+ __entry->lsn = lsn;
),
- TP_printk("dev %d:%d agno %u agbno %u len %u %s",
+ TP_printk("dev %d:%d agno %u agbno %u len %u force lsn 0x%llx",
MAJOR(__entry->dev), MINOR(__entry->dev),
__entry->agno,
__entry->agbno,
__entry->len,
- __print_symbolic(__entry->found, XFS_BUSY_STATES))
+ __entry->lsn)
);
TRACE_EVENT(xfs_agf,
);
-#define DEFINE_ALLOC_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_alloc_arg *args), \
- TP_ARGS(args), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_agnumber_t, agno) \
- __field(xfs_agblock_t, agbno) \
- __field(xfs_extlen_t, minlen) \
- __field(xfs_extlen_t, maxlen) \
- __field(xfs_extlen_t, mod) \
- __field(xfs_extlen_t, prod) \
- __field(xfs_extlen_t, minleft) \
- __field(xfs_extlen_t, total) \
- __field(xfs_extlen_t, alignment) \
- __field(xfs_extlen_t, minalignslop) \
- __field(xfs_extlen_t, len) \
- __field(short, type) \
- __field(short, otype) \
- __field(char, wasdel) \
- __field(char, wasfromfl) \
- __field(char, isfl) \
- __field(char, userdata) \
- __field(xfs_fsblock_t, firstblock) \
- ), \
- TP_fast_assign( \
- __entry->dev = args->mp->m_super->s_dev; \
- __entry->agno = args->agno; \
- __entry->agbno = args->agbno; \
- __entry->minlen = args->minlen; \
- __entry->maxlen = args->maxlen; \
- __entry->mod = args->mod; \
- __entry->prod = args->prod; \
- __entry->minleft = args->minleft; \
- __entry->total = args->total; \
- __entry->alignment = args->alignment; \
- __entry->minalignslop = args->minalignslop; \
- __entry->len = args->len; \
- __entry->type = args->type; \
- __entry->otype = args->otype; \
- __entry->wasdel = args->wasdel; \
- __entry->wasfromfl = args->wasfromfl; \
- __entry->isfl = args->isfl; \
- __entry->userdata = args->userdata; \
- __entry->firstblock = args->firstblock; \
- ), \
- TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u " \
- "prod %u minleft %u total %u alignment %u minalignslop %u " \
- "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d " \
- "userdata %d firstblock 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->agno, \
- __entry->agbno, \
- __entry->minlen, \
- __entry->maxlen, \
- __entry->mod, \
- __entry->prod, \
- __entry->minleft, \
- __entry->total, \
- __entry->alignment, \
- __entry->minalignslop, \
- __entry->len, \
- __print_symbolic(__entry->type, XFS_ALLOC_TYPES), \
- __print_symbolic(__entry->otype, XFS_ALLOC_TYPES), \
- __entry->wasdel, \
- __entry->wasfromfl, \
- __entry->isfl, \
- __entry->userdata, \
- __entry->firstblock) \
+DECLARE_EVENT_CLASS(xfs_alloc_class,
+ TP_PROTO(struct xfs_alloc_arg *args),
+ TP_ARGS(args),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_agnumber_t, agno)
+ __field(xfs_agblock_t, agbno)
+ __field(xfs_extlen_t, minlen)
+ __field(xfs_extlen_t, maxlen)
+ __field(xfs_extlen_t, mod)
+ __field(xfs_extlen_t, prod)
+ __field(xfs_extlen_t, minleft)
+ __field(xfs_extlen_t, total)
+ __field(xfs_extlen_t, alignment)
+ __field(xfs_extlen_t, minalignslop)
+ __field(xfs_extlen_t, len)
+ __field(short, type)
+ __field(short, otype)
+ __field(char, wasdel)
+ __field(char, wasfromfl)
+ __field(char, isfl)
+ __field(char, userdata)
+ __field(xfs_fsblock_t, firstblock)
+ ),
+ TP_fast_assign(
+ __entry->dev = args->mp->m_super->s_dev;
+ __entry->agno = args->agno;
+ __entry->agbno = args->agbno;
+ __entry->minlen = args->minlen;
+ __entry->maxlen = args->maxlen;
+ __entry->mod = args->mod;
+ __entry->prod = args->prod;
+ __entry->minleft = args->minleft;
+ __entry->total = args->total;
+ __entry->alignment = args->alignment;
+ __entry->minalignslop = args->minalignslop;
+ __entry->len = args->len;
+ __entry->type = args->type;
+ __entry->otype = args->otype;
+ __entry->wasdel = args->wasdel;
+ __entry->wasfromfl = args->wasfromfl;
+ __entry->isfl = args->isfl;
+ __entry->userdata = args->userdata;
+ __entry->firstblock = args->firstblock;
+ ),
+ TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u "
+ "prod %u minleft %u total %u alignment %u minalignslop %u "
+ "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d "
+ "userdata %d firstblock 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->agno,
+ __entry->agbno,
+ __entry->minlen,
+ __entry->maxlen,
+ __entry->mod,
+ __entry->prod,
+ __entry->minleft,
+ __entry->total,
+ __entry->alignment,
+ __entry->minalignslop,
+ __entry->len,
+ __print_symbolic(__entry->type, XFS_ALLOC_TYPES),
+ __print_symbolic(__entry->otype, XFS_ALLOC_TYPES),
+ __entry->wasdel,
+ __entry->wasfromfl,
+ __entry->isfl,
+ __entry->userdata,
+ __entry->firstblock)
)
+#define DEFINE_ALLOC_EVENT(name) \
+DEFINE_EVENT(xfs_alloc_class, name, \
+ TP_PROTO(struct xfs_alloc_arg *args), \
+ TP_ARGS(args))
DEFINE_ALLOC_EVENT(xfs_alloc_exact_done);
DEFINE_ALLOC_EVENT(xfs_alloc_exact_error);
DEFINE_ALLOC_EVENT(xfs_alloc_near_nominleft);
DEFINE_ALLOC_EVENT(xfs_alloc_vextent_loopfailed);
DEFINE_ALLOC_EVENT(xfs_alloc_vextent_allfailed);
-#define DEFINE_DIR2_TRACE(tname) \
-TRACE_EVENT(tname, \
+DECLARE_EVENT_CLASS(xfs_dir2_class,
+ TP_PROTO(struct xfs_da_args *args),
+ TP_ARGS(args),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __dynamic_array(char, name, args->namelen)
+ __field(int, namelen)
+ __field(xfs_dahash_t, hashval)
+ __field(xfs_ino_t, inumber)
+ __field(int, op_flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(args->dp)->i_sb->s_dev;
+ __entry->ino = args->dp->i_ino;
+ if (args->namelen)
+ memcpy(__get_str(name), args->name, args->namelen);
+ __entry->namelen = args->namelen;
+ __entry->hashval = args->hashval;
+ __entry->inumber = args->inumber;
+ __entry->op_flags = args->op_flags;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx name %.*s namelen %d hashval 0x%x "
+ "inumber 0x%llx op_flags %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->namelen,
+ __entry->namelen ? __get_str(name) : NULL,
+ __entry->namelen,
+ __entry->hashval,
+ __entry->inumber,
+ __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS))
+)
+
+#define DEFINE_DIR2_EVENT(name) \
+DEFINE_EVENT(xfs_dir2_class, name, \
TP_PROTO(struct xfs_da_args *args), \
- TP_ARGS(args), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __dynamic_array(char, name, args->namelen) \
- __field(int, namelen) \
- __field(xfs_dahash_t, hashval) \
- __field(xfs_ino_t, inumber) \
- __field(int, op_flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(args->dp)->i_sb->s_dev; \
- __entry->ino = args->dp->i_ino; \
- if (args->namelen) \
- memcpy(__get_str(name), args->name, args->namelen); \
- __entry->namelen = args->namelen; \
- __entry->hashval = args->hashval; \
- __entry->inumber = args->inumber; \
- __entry->op_flags = args->op_flags; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx name %.*s namelen %d hashval 0x%x " \
- "inumber 0x%llx op_flags %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->namelen, \
- __entry->namelen ? __get_str(name) : NULL, \
- __entry->namelen, \
- __entry->hashval, \
- __entry->inumber, \
- __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS)) \
+ TP_ARGS(args))
+DEFINE_DIR2_EVENT(xfs_dir2_sf_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_create);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_toino4);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_toino8);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_to_block);
+DEFINE_DIR2_EVENT(xfs_dir2_block_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_block_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_block_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_block_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_block_to_sf);
+DEFINE_DIR2_EVENT(xfs_dir2_block_to_leaf);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_to_block);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_to_node);
+DEFINE_DIR2_EVENT(xfs_dir2_node_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_node_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_node_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_node_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_node_to_leaf);
+
+DECLARE_EVENT_CLASS(xfs_dir2_space_class,
+ TP_PROTO(struct xfs_da_args *args, int idx),
+ TP_ARGS(args, idx),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(int, op_flags)
+ __field(int, idx)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(args->dp)->i_sb->s_dev;
+ __entry->ino = args->dp->i_ino;
+ __entry->op_flags = args->op_flags;
+ __entry->idx = idx;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx op_flags %s index %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS),
+ __entry->idx)
)
-DEFINE_DIR2_TRACE(xfs_dir2_sf_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_create);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_toino4);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_toino8);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_to_block);
-DEFINE_DIR2_TRACE(xfs_dir2_block_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_block_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_block_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_block_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_block_to_sf);
-DEFINE_DIR2_TRACE(xfs_dir2_block_to_leaf);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_to_block);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_to_node);
-DEFINE_DIR2_TRACE(xfs_dir2_node_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_node_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_node_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_node_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_node_to_leaf);
-#define DEFINE_DIR2_SPACE_TRACE(tname) \
-TRACE_EVENT(tname, \
+#define DEFINE_DIR2_SPACE_EVENT(name) \
+DEFINE_EVENT(xfs_dir2_space_class, name, \
TP_PROTO(struct xfs_da_args *args, int idx), \
- TP_ARGS(args, idx), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(int, op_flags) \
- __field(int, idx) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(args->dp)->i_sb->s_dev; \
- __entry->ino = args->dp->i_ino; \
- __entry->op_flags = args->op_flags; \
- __entry->idx = idx; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx op_flags %s index %d", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS), \
- __entry->idx) \
-)
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_leafn_add);
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_leafn_remove);
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_grow_inode);
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_shrink_inode);
+ TP_ARGS(args, idx))
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_leafn_add);
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_leafn_remove);
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_grow_inode);
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_shrink_inode);
TRACE_EVENT(xfs_dir2_leafn_moveents,
TP_PROTO(struct xfs_da_args *args, int src_idx, int dst_idx, int count),
uint flags)
{
ASSERT(mp->m_quotainfo);
- xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG);
+ xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0);
}
/*------------------------------------------------------------------------*/
xfs_mount_t *mp;
xfs_perag_busy_t *bsy;
xfs_agblock_t uend, bend;
- xfs_lsn_t lsn;
+ xfs_lsn_t lsn = 0;
int cnt;
mp = tp->t_mountp;
spin_lock(&mp->m_perag[agno].pagb_lock);
- cnt = mp->m_perag[agno].pagb_count;
uend = bno + len - 1;
- /* search pagb_list for this slot, skipping open slots */
- for (bsy = mp->m_perag[agno].pagb_list; cnt; bsy++) {
+ /*
+ * search pagb_list for this slot, skipping open slots. We have to
+ * search the entire array as there may be multiple overlaps and
+ * we have to get the most recent LSN for the log force to push out
+ * all the transactions that span the range.
+ */
+ for (cnt = 0; cnt < mp->m_perag[agno].pagb_count; cnt++) {
+ bsy = &mp->m_perag[agno].pagb_list[cnt];
+ if (!bsy->busy_tp)
+ continue;
- /*
- * (start1,length1) within (start2, length2)
- */
- if (bsy->busy_tp != NULL) {
- bend = bsy->busy_start + bsy->busy_length - 1;
- if ((bno > bend) || (uend < bsy->busy_start)) {
- cnt--;
- } else {
- break;
- }
- }
- }
+ bend = bsy->busy_start + bsy->busy_length - 1;
+ if (bno > bend || uend < bsy->busy_start)
+ continue;
- trace_xfs_alloc_busysearch(mp, agno, bno, len, !!cnt);
+ /* (start1,length1) within (start2, length2) */
+ if (XFS_LSN_CMP(bsy->busy_tp->t_commit_lsn, lsn) > 0)
+ lsn = bsy->busy_tp->t_commit_lsn;
+ }
+ spin_unlock(&mp->m_perag[agno].pagb_lock);
+ trace_xfs_alloc_busysearch(tp->t_mountp, agno, bno, len, lsn);
/*
* If a block was found, force the log through the LSN of the
* transaction that freed the block
*/
- if (cnt) {
- lsn = bsy->busy_tp->t_commit_lsn;
- spin_unlock(&mp->m_perag[agno].pagb_lock);
+ if (lsn)
xfs_log_force(mp, lsn, XFS_LOG_FORCE|XFS_LOG_SYNC);
- } else {
- spin_unlock(&mp->m_perag[agno].pagb_lock);
- }
}
return error;
}
+/*
+ * We need to check that the format of the data fork in the temporary inode is
+ * valid for the target inode before doing the swap. This is not a problem with
+ * attr1 because of the fixed fork offset, but attr2 has a dynamically sized
+ * data fork depending on the space the attribute fork is taking so we can get
+ * invalid formats on the target inode.
+ *
+ * E.g. target has space for 7 extents in extent format, temp inode only has
+ * space for 6. If we defragment down to 7 extents, then the tmp format is a
+ * btree, but when swapped it needs to be in extent format. Hence we can't just
+ * blindly swap data forks on attr2 filesystems.
+ *
+ * Note that we check the swap in both directions so that we don't end up with
+ * a corrupt temporary inode, either.
+ *
+ * Note that fixing the way xfs_fsr sets up the attribute fork in the source
+ * inode will prevent this situation from occurring, so all we do here is
+ * reject and log the attempt. basically we are putting the responsibility on
+ * userspace to get this right.
+ */
+static int
+xfs_swap_extents_check_format(
+ xfs_inode_t *ip, /* target inode */
+ xfs_inode_t *tip) /* tmp inode */
+{
+
+ /* Should never get a local format */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
+ tip->i_d.di_format == XFS_DINODE_FMT_LOCAL)
+ return EINVAL;
+
+ /*
+ * if the target inode has less extents that then temporary inode then
+ * why did userspace call us?
+ */
+ if (ip->i_d.di_nextents < tip->i_d.di_nextents)
+ return EINVAL;
+
+ /*
+ * if the target inode is in extent form and the temp inode is in btree
+ * form then we will end up with the target inode in the wrong format
+ * as we already know there are less extents in the temp inode.
+ */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
+ return EINVAL;
+
+ /* Check temp in extent form to max in target */
+ if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) > ip->i_df.if_ext_max)
+ return EINVAL;
+
+ /* Check target in extent form to max in temp */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max)
+ return EINVAL;
+
+ /* Check root block of temp in btree form to max in target */
+ if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_BOFF(ip) &&
+ tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip))
+ return EINVAL;
+
+ /* Check root block of target in btree form to max in temp */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_BOFF(tip) &&
+ ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip))
+ return EINVAL;
+
+ return 0;
+}
+
int
xfs_swap_extents(
- xfs_inode_t *ip,
- xfs_inode_t *tip,
+ xfs_inode_t *ip, /* target inode */
+ xfs_inode_t *tip, /* tmp inode */
xfs_swapext_t *sxp)
{
xfs_mount_t *mp;
goto out_unlock;
}
- /* Should never get a local format */
- if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
- tip->i_d.di_format == XFS_DINODE_FMT_LOCAL) {
- error = XFS_ERROR(EINVAL);
- goto out_unlock;
- }
-
if (VN_CACHED(VFS_I(tip)) != 0) {
error = xfs_flushinval_pages(tip, 0, -1,
FI_REMAPF_LOCKED);
goto out_unlock;
}
- /*
- * If the target has extended attributes, the tmp file
- * must also in order to ensure the correct data fork
- * format.
- */
- if ( XFS_IFORK_Q(ip) != XFS_IFORK_Q(tip) ) {
- error = XFS_ERROR(EINVAL);
+ /* check inode formats now that data is flushed */
+ error = xfs_swap_extents_check_format(ip, tip);
+ if (error) {
+ xfs_fs_cmn_err(CE_NOTE, mp,
+ "%s: inode 0x%llx format is incompatible for exchanging.",
+ __FILE__, ip->i_ino);
goto out_unlock;
}
*ifp = *tifp; /* struct copy */
*tifp = *tempifp; /* struct copy */
+ /*
+ * Fix the in-memory data fork values that are dependent on the fork
+ * offset in the inode. We can't assume they remain the same as attr2
+ * has dynamic fork offsets.
+ */
+ ifp->if_ext_max = XFS_IFORK_SIZE(ip, XFS_DATA_FORK) /
+ (uint)sizeof(xfs_bmbt_rec_t);
+ tifp->if_ext_max = XFS_IFORK_SIZE(tip, XFS_DATA_FORK) /
+ (uint)sizeof(xfs_bmbt_rec_t);
+
/*
* Fix the on-disk inode values
*/
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- ASSERT(!rwsem_is_locked(&ip->i_iolock.mr_lock));
mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
mp = ip->i_mount;
/*
- * If the inode isn't dirty, then just release the inode
- * flush lock and do nothing.
+ * If the inode isn't dirty, then just release the inode flush lock and
+ * do nothing.
*/
if (xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
}
xfs_iunpin_wait(ip);
+ /*
+ * For stale inodes we cannot rely on the backing buffer remaining
+ * stale in cache for the remaining life of the stale inode and so
+ * xfs_itobp() below may give us a buffer that no longer contains
+ * inodes below. We have to check this after ensuring the inode is
+ * unpinned so that it is safe to reclaim the stale inode after the
+ * flush call.
+ */
+ if (xfs_iflags_test(ip, XFS_ISTALE)) {
+ xfs_ifunlock(ip);
+ return 0;
+ }
+
/*
* This may have been unpinned because the filesystem is shutting
* down forcibly. If that's the case we must not write this inode
*/
error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1,
&postblock);
+ if (error)
+ return error;
/*
* If there are blocks not being freed at the front of the
* old extent, add summary data for them to be allocated.
uint commit_flags=0;
uid_t uid=0, iuid=0;
gid_t gid=0, igid=0;
- int timeflags = 0;
struct xfs_dquot *udqp, *gdqp, *olddquot1, *olddquot2;
int need_iolock = 1;
if (flags & XFS_ATTR_NOLOCK)
need_iolock = 0;
if (!(mask & ATTR_SIZE)) {
- if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) ||
- (mp->m_flags & XFS_MOUNT_WSYNC)) {
- tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
- commit_flags = 0;
- if ((code = xfs_trans_reserve(tp, 0,
- XFS_ICHANGE_LOG_RES(mp), 0,
- 0, 0))) {
- lock_flags = 0;
- goto error_return;
- }
+ tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
+ commit_flags = 0;
+ code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp),
+ 0, 0, 0);
+ if (code) {
+ lock_flags = 0;
+ goto error_return;
}
} else {
if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
* or we are explicitly asked to change it. This handles
* the semantic difference between truncate() and ftruncate()
* as implemented in the VFS.
+ *
+ * The regular truncate() case without ATTR_CTIME and ATTR_MTIME
+ * is a special case where we need to update the times despite
+ * not having these flags set. For all other operations the
+ * VFS set these flags explicitly if it wants a timestamp
+ * update.
*/
- if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME))
- timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG;
+ if (iattr->ia_size != ip->i_size &&
+ (!(mask & (ATTR_CTIME | ATTR_MTIME)))) {
+ iattr->ia_ctime = iattr->ia_mtime =
+ current_fs_time(inode->i_sb);
+ mask |= ATTR_CTIME | ATTR_MTIME;
+ }
if (iattr->ia_size > ip->i_size) {
ip->i_d.di_size = iattr->ia_size;
ip->i_size = iattr->ia_size;
- if (!(flags & XFS_ATTR_DMI))
- xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
} else if (iattr->ia_size <= ip->i_size ||
(iattr->ia_size == 0 && ip->i_d.di_nextents)) {
ip->i_d.di_gid = gid;
inode->i_gid = gid;
}
-
- xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
- timeflags |= XFS_ICHGTIME_CHG;
}
/*
inode->i_mode &= S_IFMT;
inode->i_mode |= mode & ~S_IFMT;
-
- xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- timeflags |= XFS_ICHGTIME_CHG;
}
/*
* Change file access or modified times.
*/
- if (mask & (ATTR_ATIME|ATTR_MTIME)) {
- if (mask & ATTR_ATIME) {
- inode->i_atime = iattr->ia_atime;
- ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec;
- ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec;
- ip->i_update_core = 1;
- }
- if (mask & ATTR_MTIME) {
- inode->i_mtime = iattr->ia_mtime;
- ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
- ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
- timeflags &= ~XFS_ICHGTIME_MOD;
- timeflags |= XFS_ICHGTIME_CHG;
- }
- if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)))
- xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
+ if (mask & ATTR_ATIME) {
+ inode->i_atime = iattr->ia_atime;
+ ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec;
+ ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec;
+ ip->i_update_core = 1;
}
-
- /*
- * Change file inode change time only if ATTR_CTIME set
- * AND we have been called by a DMI function.
- */
-
- if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) {
+ if (mask & ATTR_CTIME) {
inode->i_ctime = iattr->ia_ctime;
ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec;
ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec;
ip->i_update_core = 1;
- timeflags &= ~XFS_ICHGTIME_CHG;
+ }
+ if (mask & ATTR_MTIME) {
+ inode->i_mtime = iattr->ia_mtime;
+ ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
+ ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
+ ip->i_update_core = 1;
}
/*
- * Send out timestamp changes that need to be set to the
- * current time. Not done when called by a DMI function.
+ * And finally, log the inode core if any attribute in it
+ * has been changed.
*/
- if (timeflags && !(flags & XFS_ATTR_DMI))
- xfs_ichgtime(ip, timeflags);
+ if (mask & (ATTR_UID|ATTR_GID|ATTR_MODE|
+ ATTR_ATIME|ATTR_CTIME|ATTR_MTIME))
+ xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
XFS_STATS_INC(xs_ig_attrchg);
* mix so this probably isn't worth the trouble to optimize.
*/
code = 0;
- if (tp) {
- if (mp->m_flags & XFS_MOUNT_WSYNC)
- xfs_trans_set_sync(tp);
+ if (mp->m_flags & XFS_MOUNT_WSYNC)
+ xfs_trans_set_sync(tp);
- code = xfs_trans_commit(tp, commit_flags);
- }
+ code = xfs_trans_commit(tp, commit_flags);
xfs_iunlock(ip, lock_flags);
#include <linux/hardirq.h>
#define ACPI_PREEMPTION_POINT() \
do { \
- if (!in_atomic_preempt_off()) \
+ if (!in_atomic_preempt_off() && !irqs_disabled()) \
cond_resched(); \
} while (0)
struct drm_ati_pcigart_info * gart_info);
extern drm_dma_handle_t *drm_pci_alloc(struct drm_device *dev, size_t size,
- size_t align, dma_addr_t maxaddr);
+ size_t align);
extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
#define DRM_MODE_CONNECTOR_HDMIA 11
#define DRM_MODE_CONNECTOR_HDMIB 12
#define DRM_MODE_CONNECTOR_TV 13
+#define DRM_MODE_CONNECTOR_eDP 14
struct drm_mode_get_connector {
#define DRM_I915_GEM_MADVISE 0x26
#define DRM_I915_OVERLAY_PUT_IMAGE 0x27
#define DRM_I915_OVERLAY_ATTRS 0x28
+#define DRM_I915_GEM_EXECBUFFER2 0x29
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
#define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
#define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
#define I915_PARAM_NUM_FENCES_AVAIL 6
#define I915_PARAM_HAS_OVERLAY 7
#define I915_PARAM_HAS_PAGEFLIPPING 8
+#define I915_PARAM_HAS_EXECBUF2 9
typedef struct drm_i915_getparam {
int param;
__u64 cliprects_ptr;
};
+struct drm_i915_gem_exec_object2 {
+ /**
+ * User's handle for a buffer to be bound into the GTT for this
+ * operation.
+ */
+ __u32 handle;
+
+ /** Number of relocations to be performed on this buffer */
+ __u32 relocation_count;
+ /**
+ * Pointer to array of struct drm_i915_gem_relocation_entry containing
+ * the relocations to be performed in this buffer.
+ */
+ __u64 relocs_ptr;
+
+ /** Required alignment in graphics aperture */
+ __u64 alignment;
+
+ /**
+ * Returned value of the updated offset of the object, for future
+ * presumed_offset writes.
+ */
+ __u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+ __u64 flags;
+ __u64 rsvd1;
+ __u64 rsvd2;
+};
+
+struct drm_i915_gem_execbuffer2 {
+ /**
+ * List of gem_exec_object2 structs
+ */
+ __u64 buffers_ptr;
+ __u32 buffer_count;
+
+ /** Offset in the batchbuffer to start execution from. */
+ __u32 batch_start_offset;
+ /** Bytes used in batchbuffer from batch_start_offset */
+ __u32 batch_len;
+ __u32 DR1;
+ __u32 DR4;
+ __u32 num_cliprects;
+ /** This is a struct drm_clip_rect *cliprects */
+ __u64 cliprects_ptr;
+ __u64 flags; /* currently unused */
+ __u64 rsvd1;
+ __u64 rsvd2;
+};
+
struct drm_i915_gem_pin {
/** Handle of the buffer to be pinned. */
__u32 handle;
/* notify the driver we are taking a fault on this BO
* and have reserved it */
void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
+
+ /**
+ * notify the driver that we're about to swap out this bo
+ */
+ void (*swap_notify) (struct ttm_buffer_object *bo);
};
/**
void __acpi_unmap_table(char *map, unsigned long size);
int early_acpi_boot_init(void);
int acpi_boot_init (void);
-int acpi_boot_table_init (void);
+void acpi_boot_table_init (void);
int acpi_mps_check (void);
int acpi_numa_init (void);
void __init acpi_no_s4_hw_signature(void);
void __init acpi_old_suspend_ordering(void);
void __init acpi_s4_no_nvs(void);
+void __init acpi_set_sci_en_on_resume(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
return 0;
}
-static inline int acpi_boot_table_init(void)
+static inline void acpi_boot_table_init(void)
{
- return 0;
+ return;
}
static inline int acpi_mps_check(void)
extern int __must_check remove_arg_zero(struct linux_binprm *);
extern int search_binary_handler(struct linux_binprm *,struct pt_regs *);
extern int flush_old_exec(struct linux_binprm * bprm);
+extern void setup_new_exec(struct linux_binprm * bprm);
extern int suid_dumpable;
#define SUID_DUMP_DISABLE 0 /* No setuid dumping */
* blk_rq_err_bytes() : bytes left till the next error boundary
* blk_rq_sectors() : sectors left in the entire request
* blk_rq_cur_sectors() : sectors left in the current segment
- * blk_rq_err_sectors() : sectors left till the next error boundary
*/
static inline sector_t blk_rq_pos(const struct request *rq)
{
return blk_rq_cur_bytes(rq) >> 9;
}
-static inline unsigned int blk_rq_err_sectors(const struct request *rq)
-{
- return blk_rq_err_bytes(rq) >> 9;
-}
-
/*
* Request issue related functions.
*/
extern void blk_set_default_limits(struct queue_limits *lim);
extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
sector_t offset);
+extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+ sector_t offset);
extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
return q->limits.alignment_offset;
}
+static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset)
+{
+ unsigned int granularity = max(lim->physical_block_size, lim->io_min);
+
+ offset &= granularity - 1;
+ return (granularity + lim->alignment_offset - offset) & (granularity - 1);
+}
+
static inline int queue_sector_alignment_offset(struct request_queue *q,
sector_t sector)
{
- return ((sector << 9) - q->limits.alignment_offset)
- & (q->limits.io_min - 1);
+ return queue_limit_alignment_offset(&q->limits, sector << 9);
}
static inline int bdev_alignment_offset(struct block_device *bdev)
static inline int queue_sector_discard_alignment(struct request_queue *q,
sector_t sector)
{
- return ((sector << 9) - q->limits.discard_alignment)
- & (q->limits.discard_granularity - 1);
+ struct queue_limits *lim = &q->limits;
+ unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
+
+ return (lim->discard_granularity + lim->discard_alignment - alignment)
+ & (lim->discard_granularity - 1);
}
static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
--- /dev/null
+#ifndef DECOMPRESS_UNLZO_H
+#define DECOMPRESS_UNLZO_H
+
+int unlzo(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error)(char *x));
+#endif
extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.6"
+#define REL_VERSION "8.3.7"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
#define PRO_VERSION_MAX 91
NL_PACKET(resize, 7,
NL_INT64( 29, T_MAY_IGNORE, resize_size)
+ NL_BIT( 68, T_MAY_IGNORE, resize_force)
)
NL_PACKET(syncer_conf, 8,
#include <linux/fcntl.h>
#include <linux/file.h>
+#include <linux/wait.h>
/*
* CAREFUL: Check include/asm-generic/fcntl.h when defining
struct eventfd_ctx *eventfd_ctx_fdget(int fd);
struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
int eventfd_signal(struct eventfd_ctx *ctx, int n);
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt);
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+ __u64 *cnt);
#else /* CONFIG_EVENTFD */
}
+static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait,
+ __u64 *cnt)
+{
+ return -ENOSYS;
+}
+
+static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx,
+ wait_queue_t *wait, __u64 *cnt)
+{
+ return -ENOSYS;
+}
+
#endif
#endif /* _LINUX_EVENTFD_H */
* The @closure field is passed back to userspace in the response event.
* The @handle field is an out parameter, returning a handle to the allocated
* range to be used for later deallocation of the range.
+ *
+ * The address range is allocated on all local nodes. The address allocation
+ * is exclusive except for the FCP command and response registers.
*/
struct fw_cdev_allocate {
__u64 offset;
* @immediate: If non-zero, immediate key to insert before pointer
* @key: Upper 8 bits of root directory pointer
* @data: Userspace pointer to contents of descriptor block
- * @length: Length of descriptor block data, in bytes
+ * @length: Length of descriptor block data, in quadlets
* @handle: Handle to the descriptor, written by the kernel
*
* Add a descriptor block and optionally a preceding immediate key to the local
* If not 0, the @immediate field specifies an immediate key which will be
* inserted before the root directory pointer.
*
+ * @immediate, @key, and @data array elements are CPU-endian quadlets.
+ *
* If successful, the kernel adds the descriptor and writes back a handle to the
* kernel-side object to be used for later removal of the descriptor block and
* immediate key.
void *data, size_t length,
void *callback_data);
/*
- * Important note: The callback must guarantee that either fw_send_response()
- * or kfree() is called on the @request.
+ * Important note: Except for the FCP registers, the callback must guarantee
+ * that either fw_send_response() or kfree() is called on the @request.
*/
typedef void (*fw_address_callback_t)(struct fw_card *card,
struct fw_request *request,
int __init get_filesystem_list(char *buf);
-#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
+#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
#endif /* __KERNEL__ */
#define part_stat_read(part, field) \
({ \
typeof((part)->dkstats->field) res = 0; \
- int i; \
- for_each_possible_cpu(i) \
- res += per_cpu_ptr((part)->dkstats, i)->field; \
+ unsigned int _cpu; \
+ for_each_possible_cpu(_cpu) \
+ res += per_cpu_ptr((part)->dkstats, _cpu)->field; \
res; \
})
static inline unsigned int nr_free_highpages(void) { return 0; }
-#define totalhigh_pages 0
+#define totalhigh_pages 0UL
#ifndef ARCH_HAS_KMAP
static inline void *kmap(struct page *page)
unsigned short unlock_key2; /* Unlock Key 2 */
};
+struct adp5588_gpio_platform_data {
+ unsigned gpio_start; /* GPIO Chip base # */
+ unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
+ int (*setup)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ int (*teardown)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ void *context;
+};
+
#endif
#define IEEE80211_HT_CAP_DELAY_BA 0x0400
#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
-#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000
+#define IEEE80211_HT_CAP_RESERVED 0x2000
#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
#define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING)
#define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
#define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER)
+#define IN_DEV_SRC_VMARK(in_dev) IN_DEV_ORCONF((in_dev), SRC_VMARK)
#define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \
ACCEPT_SOURCE_ROUTE)
#define IN_DEV_ACCEPT_LOCAL(in_dev) IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL)
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
#include <linux/radix-tree.h>
#include <linux/rcupdate.h>
-/*
- * This is the per-process anticipatory I/O scheduler state.
- */
-struct as_io_context {
- spinlock_t lock;
-
- void (*dtor)(struct as_io_context *aic); /* destructor */
- void (*exit)(struct as_io_context *aic); /* called on task exit */
-
- unsigned long state;
- atomic_t nr_queued; /* queued reads & sync writes */
- atomic_t nr_dispatched; /* number of requests gone to the drivers */
-
- /* IO History tracking */
- /* Thinktime */
- unsigned long last_end_request;
- unsigned long ttime_total;
- unsigned long ttime_samples;
- unsigned long ttime_mean;
- /* Layout pattern */
- unsigned int seek_samples;
- sector_t last_request_pos;
- u64 seek_total;
- sector_t seek_mean;
-};
-
struct cfq_queue;
struct cfq_io_context {
void *key;
unsigned long last_waited; /* Time last woken after wait for request */
int nr_batch_requests; /* Number of requests left in the batch */
- struct as_io_context *aic;
struct radix_tree_root radix_root;
struct hlist_head cic_list;
void *ioc_data;
* waiting for it to finish.
*/
unsigned int t_synchronous_commit:1;
+ unsigned int t_flushed_data_blocks:1;
/*
* For use by the filesystem to store fs-specific data
/* Force a compilation error if condition is constant and true */
#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
+ BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
/* Force a compilation error if condition is true, but also produce a
result (of value 0 and type size_t), so the expression can be used
e.g. in a structure initializer (or where-ever else comma expressions
/**
* DECLARE_KFIFO - macro to declare a kfifo and the associated buffer
* @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
*
* Note1: the macro can be used inside struct or union declaration
* Note2: the macro creates two objects:
}
/**
- * INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO
+ * INIT_KFIFO - Initialize a kfifo declared by DECLARE_KFIFO
* @name: name of the declared kfifo datatype
*/
#define INIT_KFIFO(name) \
/**
* DEFINE_KFIFO - macro to define and initialize a kfifo
* @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
*
* Note1: the macro can be used for global and local kfifo data type variables
* Note2: the macro creates two objects:
#undef __kfifo_initializer
-extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+extern void kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size);
extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size,
gfp_t gfp_mask);
extern void kfifo_free(struct kfifo *fifo);
extern unsigned int kfifo_in(struct kfifo *fifo,
- const unsigned char *from, unsigned int len);
+ const void *from, unsigned int len);
extern __must_check unsigned int kfifo_out(struct kfifo *fifo,
- unsigned char *to, unsigned int len);
+ void *to, unsigned int len);
+extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo,
+ void *to, unsigned int len, unsigned offset);
+
+/**
+ * kfifo_initialized - Check if kfifo is initialized.
+ * @fifo: fifo to check
+ * Return %true if FIFO is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
+ */
+static inline bool kfifo_initialized(struct kfifo *fifo)
+{
+ return fifo->buffer != 0;
+}
/**
* kfifo_reset - removes the entire FIFO contents
* bytes copied.
*/
static inline unsigned int kfifo_in_locked(struct kfifo *fifo,
- const unsigned char *from, unsigned int n, spinlock_t *lock)
+ const void *from, unsigned int n, spinlock_t *lock)
{
unsigned long flags;
unsigned int ret;
* @to buffer and returns the number of copied bytes.
*/
static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo,
- unsigned char *to, unsigned int n, spinlock_t *lock)
+ void *to, unsigned int n, spinlock_t *lock)
{
unsigned long flags;
unsigned int ret;
ret = kfifo_out(fifo, to, n);
- /*
- * optimization: if the FIFO is empty, set the indices to 0
- * so we don't wrap the next time
- */
- if (kfifo_is_empty(fifo))
- kfifo_reset(fifo);
-
spin_unlock_irqrestore(lock, flags);
return ret;
extern void kfifo_skip(struct kfifo *fifo, unsigned int len);
-extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int n);
+extern __must_check int kfifo_from_user(struct kfifo *fifo,
+ const void __user *from, unsigned int n, unsigned *lenout);
-extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int n);
+extern __must_check int kfifo_to_user(struct kfifo *fifo,
+ void __user *to, unsigned int n, unsigned *lenout);
/*
* __kfifo_add_out internal helper function for updating the out offset
*
* On some architectures it is required to skip a breakpoint
* exception when it occurs after a breakpoint has been removed.
- * This can be implemented in the architecture specific portion of
- * for kgdb.
+ * This can be implemented in the architecture specific portion of kgdb.
*/
extern int kgdb_skipexception(int exception, struct pt_regs *regs);
/**
* kgdb_breakpoint - compiled in breakpoint
*
- * This will be impelmented a static inline per architecture. This
+ * This will be implemented as a static inline per architecture. This
* function is called by the kgdb core to execute an architecture
* specific trap to cause kgdb to enter the exception processing.
*
* @flags: Current IRQ state
*
* On SMP systems, we need to get the attention of the other CPUs
- * and get them be in a known state. This should do what is needed
+ * and get them into a known state. This should do what is needed
* to get the other CPUs to call kgdb_wait(). Note that on some arches,
* the NMI approach is not used for rounding up all the CPUs. For example,
* in case of MIPS, smp_call_function() is used to roundup CPUs. In
bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
+/*
+ * Bitfield annotations
+ *
+ * How to use: If you have a struct using bitfields, for example
+ *
+ * struct a {
+ * int x:8, y:8;
+ * };
+ *
+ * then this should be rewritten as
+ *
+ * struct a {
+ * kmemcheck_bitfield_begin(flags);
+ * int x:8, y:8;
+ * kmemcheck_bitfield_end(flags);
+ * };
+ *
+ * Now the "flags_begin" and "flags_end" members may be used to refer to the
+ * beginning and end, respectively, of the bitfield (and things like
+ * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
+ * fields should be annotated:
+ *
+ * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
+ * kmemcheck_annotate_bitfield(a, flags);
+ */
+#define kmemcheck_bitfield_begin(name) \
+ int name##_begin[0];
+
+#define kmemcheck_bitfield_end(name) \
+ int name##_end[0];
+
+#define kmemcheck_annotate_bitfield(ptr, name) \
+ do { \
+ int _n; \
+ \
+ if (!ptr) \
+ break; \
+ \
+ _n = (long) &((ptr)->name##_end) \
+ - (long) &((ptr)->name##_begin); \
+ MAYBE_BUILD_BUG_ON(_n < 0); \
+ \
+ kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \
+ } while (0)
+
+#define kmemcheck_annotate_variable(var) \
+ do { \
+ kmemcheck_mark_initialized(&(var), sizeof(var)); \
+ } while (0) \
+
#else
#define kmemcheck_enabled 0
return true;
}
-#endif /* CONFIG_KMEMCHECK */
-
-/*
- * Bitfield annotations
- *
- * How to use: If you have a struct using bitfields, for example
- *
- * struct a {
- * int x:8, y:8;
- * };
- *
- * then this should be rewritten as
- *
- * struct a {
- * kmemcheck_bitfield_begin(flags);
- * int x:8, y:8;
- * kmemcheck_bitfield_end(flags);
- * };
- *
- * Now the "flags_begin" and "flags_end" members may be used to refer to the
- * beginning and end, respectively, of the bitfield (and things like
- * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
- * fields should be annotated:
- *
- * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
- * kmemcheck_annotate_bitfield(a, flags);
- *
- * Note: We provide the same definitions for both kmemcheck and non-
- * kmemcheck kernels. This makes it harder to introduce accidental errors. It
- * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield().
- */
-#define kmemcheck_bitfield_begin(name) \
- int name##_begin[0];
-
-#define kmemcheck_bitfield_end(name) \
- int name##_end[0];
+#define kmemcheck_bitfield_begin(name)
+#define kmemcheck_bitfield_end(name)
+#define kmemcheck_annotate_bitfield(ptr, name) \
+ do { \
+ } while (0)
-#define kmemcheck_annotate_bitfield(ptr, name) \
- do { \
- int _n; \
- \
- if (!ptr) \
- break; \
- \
- _n = (long) &((ptr)->name##_end) \
- - (long) &((ptr)->name##_begin); \
- MAYBE_BUILD_BUG_ON(_n < 0); \
- \
- kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \
+#define kmemcheck_annotate_variable(var) \
+ do { \
} while (0)
-#define kmemcheck_annotate_variable(var) \
- do { \
- kmemcheck_mark_initialized(&(var), sizeof(var)); \
- } while (0) \
+#endif /* CONFIG_KMEMCHECK */
#endif /* LINUX_KMEMCHECK_H */
enum kmsg_dump_reason {
KMSG_DUMP_OOPS,
KMSG_DUMP_PANIC,
+ KMSG_DUMP_KEXEC,
};
/**
/* max tries if error condition is still set after ->error_handler */
ATA_EH_MAX_TRIES = 5,
+ /* sometimes resuming a link requires several retries */
+ ATA_LINK_RESUME_TRIES = 5,
+
/* how hard are we gonna try to probe/recover devices */
ATA_PROBE_MAX_TRIES = 3,
ATA_EH_DEV_TRIES = 3,
--- /dev/null
+#ifndef _LINUX_LIST_SORT_H
+#define _LINUX_LIST_SORT_H
+
+#include <linux/types.h>
+
+struct list_head;
+
+void list_sort(void *priv, struct list_head *head,
+ int (*cmp)(void *priv, struct list_head *a,
+ struct list_head *b));
+#endif
#define MFD_TMIO_H
#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
#define tmio_ioread8(addr) readb(addr)
#define tmio_ioread16(addr) readw(addr)
writew((val) >> 16, (addr) + 2); \
} while (0)
+#define CNF_CMD 0x04
+#define CNF_CTL_BASE 0x10
+#define CNF_INT_PIN 0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define sd_config_write8(base, shift, reg, val) \
+ tmio_iowrite8((val), (base) + ((reg) << (shift)))
+#define sd_config_write16(base, shift, reg, val) \
+ tmio_iowrite16((val), (base) + ((reg) << (shift)))
+#define sd_config_write32(base, shift, reg, val) \
+ do { \
+ tmio_iowrite16((val), (base) + ((reg) << (shift))); \
+ tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
+ } while (0)
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
+
/*
* data for the MMC controller
*/
struct tmio_mmc_data {
const unsigned int hclk;
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
};
/*
#define WM8350_ISINK_FLASH_DUR_64MS (1 << 8)
#define WM8350_ISINK_FLASH_DUR_96MS (2 << 8)
#define WM8350_ISINK_FLASH_DUR_1024MS (3 << 8)
-#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 4)
-#define WM8350_ISINK_FLASH_ON_0_25S (1 << 4)
-#define WM8350_ISINK_FLASH_ON_0_50S (2 << 4)
-#define WM8350_ISINK_FLASH_ON_1_00S (3 << 4)
-#define WM8350_ISINK_FLASH_ON_1_95S (1 << 4)
-#define WM8350_ISINK_FLASH_ON_3_91S (2 << 4)
-#define WM8350_ISINK_FLASH_ON_7_80S (3 << 4)
-#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 0)
-#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 0)
-#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 0)
+#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 0)
+#define WM8350_ISINK_FLASH_ON_0_25S (1 << 0)
+#define WM8350_ISINK_FLASH_ON_0_50S (2 << 0)
+#define WM8350_ISINK_FLASH_ON_1_00S (3 << 0)
+#define WM8350_ISINK_FLASH_ON_1_95S (1 << 0)
+#define WM8350_ISINK_FLASH_ON_3_91S (2 << 0)
+#define WM8350_ISINK_FLASH_ON_7_80S (3 << 0)
+#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 4)
+#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 4)
+#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 4)
/*
* Regulator Interrupts.
/* nommu.c */
extern atomic_long_t mmap_pages_allocated;
+extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
/* prio_tree.c */
void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
unsigned long vm_pgoff; /* the offset in vm_file corresponding to vm_start */
struct file *vm_file; /* the backing file or NULL */
- atomic_t vm_usage; /* region usage count */
+ int vm_usage; /* region usage count (access under nommu_region_sem) */
+ bool vm_icache_flushed : 1; /* true if the icache has been flushed for
+ * this region */
};
/*
struct vm_area_struct * mmap; /* list of VMAs */
struct rb_root mm_rb;
struct vm_area_struct * mmap_cache; /* last find_vma result */
+#ifdef CONFIG_MMU
unsigned long (*get_unmapped_area) (struct file *filp,
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
+#endif
unsigned long mmap_base; /* base of mmap area */
unsigned long task_size; /* size of task vm space */
unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
--- /dev/null
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef __LINUX_MTD_PISMO_H
+#define __LINUX_MTD_PISMO_H
+
+struct pismo_pdata {
+ void (*set_vpp)(void *, int);
+ void *vpp_data;
+ phys_addr_t cs_addrs[5];
+};
+
+#endif
extern struct page * read_cache_page(struct address_space *mapping,
pgoff_t index, filler_t *filler,
void *data);
+extern struct page * read_cache_page_gfp(struct address_space *mapping,
+ pgoff_t index, gfp_t gfp_mask);
extern int read_cache_pages(struct address_space *mapping,
struct list_head *pages, filler_t *filler, void *data);
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* Only allow D0 and D3 */
unsigned int wakeup_prepared:1;
+ unsigned int d3_delay; /* D3->D0 transition time in ms */
#ifdef CONFIG_PCIEASPM
struct pcie_link_state *link_state; /* ASPM link state. */
resource_size_t);
void pcibios_update_irq(struct pci_dev *, int irq);
+/* Weak but can be overriden by arch */
+void pci_fixup_cardbus(struct pci_bus *);
+
/* Generic PCI functions used internally */
extern struct pci_bus *pci_find_bus(int domain, int busnr);
*/
static inline int is_software_event(struct perf_event *event)
{
- return (event->attr.type != PERF_TYPE_RAW) &&
- (event->attr.type != PERF_TYPE_HARDWARE) &&
- (event->attr.type != PERF_TYPE_HW_CACHE);
+ switch (event->attr.type) {
+ case PERF_TYPE_SOFTWARE:
+ case PERF_TYPE_TRACEPOINT:
+ /* for now the breakpoint stuff also works as software event */
+ case PERF_TYPE_BREAKPOINT:
+ return 1;
+ }
+ return 0;
}
extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
int phy_device_register(struct phy_device *phy);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_init_hw(struct phy_device *phydev);
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface);
struct phy_device * phy_attach(struct net_device *dev,
int phy_driver_register(struct phy_driver *new_driver);
void phy_prepare_link(struct phy_device *phydev,
void (*adjust_link)(struct net_device *));
+void phy_state_machine(struct work_struct *work);
void phy_start_machine(struct phy_device *phydev,
void (*handler)(struct net_device *));
void phy_stop_machine(struct phy_device *phydev);
#define _LINUX_POISON_H
/********** include/linux/list.h **********/
+
+/*
+ * Architectures might want to move the poison pointer offset
+ * into some well-recognized area such as 0xdead000000000000,
+ * that is also not mappable by user-space exploits:
+ */
+#ifdef CONFIG_ILLEGAL_POINTER_VALUE
+# define POISON_POINTER_DELTA _AC(CONFIG_ILLEGAL_POINTER_VALUE, UL)
+#else
+# define POISON_POINTER_DELTA 0
+#endif
+
/*
* These are non-NULL pointers that will result in page faults
* under normal circumstances, used to verify that nobody uses
* non-initialized list entries.
*/
-#define LIST_POISON1 ((void *) 0x00100100)
-#define LIST_POISON2 ((void *) 0x00200200)
+#define LIST_POISON1 ((void *) 0x00100100 + POISON_POINTER_DELTA)
+#define LIST_POISON2 ((void *) 0x00200200 + POISON_POINTER_DELTA)
/********** include/linux/timer.h **********/
/*
int reiserfs_write_lock_once(struct super_block *s);
void reiserfs_write_unlock_once(struct super_block *s, int lock_depth);
+#ifdef CONFIG_REISERFS_CHECK
+void reiserfs_lock_check_recursive(struct super_block *s);
+#else
+static inline void reiserfs_lock_check_recursive(struct super_block *s) { }
+#endif
+
/*
* Several mutexes depend on the write lock.
* However sometimes we want to relax the write lock while we hold
static inline void reiserfs_mutex_lock_safe(struct mutex *m,
struct super_block *s)
{
+ reiserfs_lock_check_recursive(s);
reiserfs_write_unlock(s);
mutex_lock(m);
reiserfs_write_lock(s);
}
+static inline void
+reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass,
+ struct super_block *s)
+{
+ reiserfs_lock_check_recursive(s);
+ reiserfs_write_unlock(s);
+ mutex_lock_nested(m, subclass);
+ reiserfs_write_lock(s);
+}
+
+static inline void
+reiserfs_down_read_safe(struct rw_semaphore *sem, struct super_block *s)
+{
+ reiserfs_lock_check_recursive(s);
+ reiserfs_write_unlock(s);
+ down_read(sem);
+ reiserfs_write_lock(s);
+}
+
/*
* When we schedule, we usually want to also release the write lock,
* according to the previous bkl based locking scheme of reiserfs.
#include <linux/time.h>
-struct task_struct;
-
/*
* Resource control/accounting header file for linux
*/
*/
#include <asm/resource.h>
+#ifdef __KERNEL__
+
+struct task_struct;
+
int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
+#endif /* __KERNEL__ */
+
#endif
#include <linux/aio.h>
+#ifdef CONFIG_MMU
+extern void arch_pick_mmap_layout(struct mm_struct *mm);
extern unsigned long
arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
unsigned long, unsigned long);
unsigned long flags);
extern void arch_unmap_area(struct mm_struct *, unsigned long);
extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
+#else
+static inline void arch_pick_mmap_layout(struct mm_struct *mm) {}
+#endif
#if USE_SPLIT_PTLOCKS
/*
char comm[TASK_COMM_LEN]; /* executable name excluding path
- access with [gs]et_task_comm (which lock
it with task_lock())
- - initialized normally by flush_old_exec */
+ - initialized normally by setup_new_exec */
/* file system info */
int link_count, total_link_count;
#ifdef CONFIG_SYSVIPC
#endif /* CONFIG_SMP */
-extern void arch_pick_mmap_layout(struct mm_struct *mm);
-
#ifdef CONFIG_TRACING
extern void
__trace_special(void *__tr, void *__data,
}
#endif /* CONFIG_MM_OWNER */
+static inline unsigned long task_rlimit(const struct task_struct *tsk,
+ unsigned int limit)
+{
+ return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_cur);
+}
+
+static inline unsigned long task_rlimit_max(const struct task_struct *tsk,
+ unsigned int limit)
+{
+ return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_max);
+}
+
+static inline unsigned long rlimit(unsigned int limit)
+{
+ return task_rlimit(current, limit);
+}
+
+static inline unsigned long rlimit_max(unsigned int limit)
+{
+ return task_rlimit_max(current, limit);
+}
+
#endif /* __KERNEL__ */
#endif
spin_unlock_irq(&serio->lock);
}
-/*
- * Use the following functions to pin serio's driver in process context
- */
-static inline int serio_pin_driver(struct serio *serio)
-{
- return mutex_lock_interruptible(&serio->drv_mutex);
-}
-
-static inline void serio_pin_driver_uninterruptible(struct serio *serio)
-{
- mutex_lock(&serio->drv_mutex);
-}
-
-static inline void serio_unpin_driver(struct serio *serio)
-{
- mutex_unlock(&serio->drv_mutex);
-}
-
-
#endif
/*
* 1 = 4, 2 = 8, 3 = 16 (median > averaging)
*/
u8 median;
- /* 1 = AUX/VBAT/GPIO set to GPIO Output */
- u8 gpio_output;
- /* Initial GPIO pin state (valid if gpio_output = 1) */
- u8 gpio_default;
+ /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+ * requires CONFIG_GPIOLIB
+ */
+ bool gpio_export;
+ /* identifies the first GPIO number handled by this chip;
+ * or, if negative, requests dynamic ID allocation.
+ */
+ s32 gpio_base;
};
}
#ifndef __HAVE_ARCH_STRSTR
-extern char * strstr(const char *,const char *);
+extern char * strstr(const char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNSTR
+extern char * strnstr(const char *, const char *, size_t);
#endif
#ifndef __HAVE_ARCH_STRLEN
extern __kernel_size_t strlen(const char *);
static const struct syscall_metadata __used \
__attribute__((__aligned__(4))) \
__attribute__((section("__syscalls_metadata"))) \
- __syscall_meta_##sname = { \
+ __syscall_meta__##sname = { \
.name = "sys_"#sname, \
.nb_args = 0, \
.enter_event = &event_enter__##sname, \
NET_IPV4_CONF_ARP_ACCEPT=21,
NET_IPV4_CONF_ARP_NOTIFY=22,
NET_IPV4_CONF_ACCEPT_LOCAL=23,
+ NET_IPV4_CONF_SRC_VMARK=24,
__NET_IPV4_CONF_MAX
};
| 1*SD_WAKE_AFFINE \
| 1*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
- | 0*SD_SHARE_PKG_RESOURCES \
+ | 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| 0*SD_PREFER_SIBLING \
, \
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
-extern inline struct tty_port *tty_port_get(struct tty_port *port)
+static inline struct tty_port *tty_port_get(struct tty_port *port)
{
if (port)
kref_get(&port->kref);
struct tty_struct *tty, struct file *filp);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
-extern inline int tty_port_users(struct tty_port *port)
+static inline int tty_port_users(struct tty_port *port)
{
return port->count + port->blocked_open;
}
* happens, handle that and return -EFAULT.
*/
extern long probe_kernel_read(void *dst, void *src, size_t size);
+extern long __probe_kernel_read(void *dst, void *src, size_t size);
/*
* probe_kernel_write(): safely attempt to write to a location
* Safely write to address @dst from the buffer at @src. If a kernel fault
* happens, handle that and return -EFAULT.
*/
-extern long probe_kernel_write(void *dst, void *src, size_t size);
+extern long notrace probe_kernel_write(void *dst, void *src, size_t size);
+extern long notrace __probe_kernel_write(void *dst, void *src, size_t size);
#endif /* __LINUX_UACCESS_H__ */
unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
unsigned reset_running:1;
+ unsigned resetting_device:1; /* true: bandwidth alloc after reset */
struct device dev; /* interface specific device info */
struct device *usb_dev;
struct bdi_writeback;
int inode_wait(void *);
void writeback_inodes_sb(struct super_block *);
+int writeback_inodes_sb_if_idle(struct super_block *);
void sync_inodes_sb(struct super_block *);
void writeback_inodes_wbc(struct writeback_control *wbc);
long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
#endif
+static inline int sk_mc_loop(struct sock *sk)
+{
+ if (!sk)
+ return 1;
+ switch (sk->sk_family) {
+ case AF_INET:
+ return inet_sk(sk)->mc_loop;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ case AF_INET6:
+ return inet6_sk(sk)->mc_loop;
+#endif
+ }
+ WARN_ON(1);
+ return 1;
+}
+
extern int ip_call_ra_chain(struct sk_buff *skb);
/*
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
* @noise: noise when receiving this frame, in dBm.
- * @qual: overall signal quality indication, in percent (0-100).
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT rates are use (RX_FLAG_HT)
int freq;
int signal;
int noise;
- int __deprecated qual;
int antenna;
int rate_idx;
int flag;
local_bh_enable();
}
+/*
+ * The TX headroom reserved by mac80211 for its own tx_status functions.
+ * This is enough for the radiotap header.
+ */
+#define IEEE80211_TX_STATUS_HEADROOM 13
+
/**
* ieee80211_tx_status - transmit status callback
*
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/xfrm.h>
+#include <net/dst_ops.h>
struct ctl_table_header;
unsigned int policy_count[XFRM_POLICY_MAX * 2];
struct work_struct policy_hash_work;
+ struct dst_ops xfrm4_dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ struct dst_ops xfrm6_dst_ops;
+#endif
+
struct sock *nlsk;
struct sock *nlsk_stash;
static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
{
if (atomic_dec_and_test(&nr_neigh->refcount)) {
+ if (nr_neigh->ax25)
+ ax25_cb_put(nr_neigh->ax25);
kfree(nr_neigh->digipeat);
kfree(nr_neigh);
}
extern struct xfrm_state *xfrm_find_acq_byseq(struct net *net, u32 seq);
extern int xfrm_state_delete(struct xfrm_state *x);
extern int xfrm_state_flush(struct net *net, u8 proto, struct xfrm_audit *audit_info);
-extern void xfrm_sad_getinfo(struct xfrmk_sadinfo *si);
-extern void xfrm_spd_getinfo(struct xfrmk_spdinfo *si);
+extern void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si);
+extern void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
extern int xfrm_replay_check(struct xfrm_state *x,
struct sk_buff *skb, __be32 seq);
extern void xfrm_replay_advance(struct xfrm_state *x, __be32 seq);
#define __LIBSRP_H__
#include <linux/list.h>
+#include <linux/kfifo.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <scsi/srp.h>
struct fc_bsg_rport_els r_els;
struct fc_bsg_rport_ct r_ct;
} rqst_data;
-};
+} __attribute__((packed));
/* response (request sense data) structure of the sg_io_v4 */
BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \
ret = trace_define_field(event_call, #type "[" #len "]", #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), 0, FILTER_OTHER); \
+ sizeof(field.item), \
+ is_signed_type(type), FILTER_OTHER); \
if (ret) \
return ret;
#define __dynamic_array(type, item, len) \
ret = trace_define_field(event_call, "__data_loc " #type "[]", #item, \
offsetof(typeof(field), __data_loc_##item), \
- sizeof(field.__data_loc_##item), 0, \
- FILTER_OTHER);
+ sizeof(field.__data_loc_##item), \
+ is_signed_type(type), FILTER_OTHER);
#undef __string
#define __string(item, src) __dynamic_array(char, item, -1)
config HAVE_KERNEL_LZMA
bool
+config HAVE_KERNEL_LZO
+ bool
+
choice
prompt "Kernel compression mode"
default KERNEL_GZIP
- depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
+ depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO
help
The linux kernel is a kind of self-extracting executable.
Several compression algorithms are available, which differ
bool "Gzip"
depends on HAVE_KERNEL_GZIP
help
- The old and tried gzip compression. Its compression ratio is
- the poorest among the 3 choices; however its speed (both
- compression and decompression) is the fastest.
+ The old and tried gzip compression. It provides a good balance
+ between compression ratio and decompression speed.
config KERNEL_BZIP2
bool "Bzip2"
two. Compression is slowest. The kernel size is about 33%
smaller with LZMA in comparison to gzip.
+config KERNEL_LZO
+ bool "LZO"
+ depends on HAVE_KERNEL_LZO
+ help
+ Its compression ratio is the poorest among the 4. The kernel
+ size is about about 10% bigger than gzip; however its speed
+ (both compression and decompression) is the fastest.
+
endchoice
config SWAP
.mmap = shm_mmap,
.fsync = shm_fsync,
.release = shm_release,
+#ifndef CONFIG_MMU
+ .get_unmapped_area = shm_get_unmapped_area,
+#endif
};
static const struct file_operations shm_file_operations_huge = {
/* make sure l doesn't vanish out from under us */
down_write(&l->mutex);
mutex_unlock(&cgrp->pidlist_mutex);
- l->use_count++;
return l;
}
}
* @uaddr: virtual address of the futex
* @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
* @key: address where result is stored.
- * @rw: mapping needs to be read/write (values: VERIFY_READ,
- * VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
* lock_page() might sleep, the caller should not hold a spinlock.
*/
static int
-get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
* but access_ok() should be faster than find_vma()
*/
if (!fshared) {
- if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
+ if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
return -EFAULT;
key->private.mm = mm;
key->private.address = address;
}
again:
- err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
+ err = get_user_pages_fast(address, 1, 1, &page);
if (err < 0)
return err;
if (!bitset)
return -EINVAL;
- ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
+ ret = get_futex_key(uaddr, fshared, &key);
if (unlikely(ret != 0))
goto out;
int ret, op_ret;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+ ret = get_futex_key(uaddr1, fshared, &key1);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out_put_key1;
pi_state = NULL;
}
- ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+ ret = get_futex_key(uaddr1, fshared, &key1);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2,
- requeue_pi ? VERIFY_WRITE : VERIFY_READ);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out_put_key1;
*/
retry:
q->key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q->key, VERIFY_READ);
+ ret = get_futex_key(uaddr, fshared, &q->key);
if (unlikely(ret != 0))
return ret;
q.requeue_pi_key = NULL;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
+ ret = get_futex_key(uaddr, fshared, &q.key);
if (unlikely(ret != 0))
goto out;
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
return -EPERM;
- ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
+ ret = get_futex_key(uaddr, fshared, &key);
if (unlikely(ret != 0))
goto out;
rt_waiter.task = NULL;
key2 = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out;
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/init.h>
+#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/hw_breakpoint.h>
if (!cpu_events)
return ERR_PTR(-ENOMEM);
- for_each_possible_cpu(cpu) {
+ get_online_cpus();
+ for_each_online_cpu(cpu) {
pevent = per_cpu_ptr(cpu_events, cpu);
bp = perf_event_create_kernel_counter(attr, cpu, -1, triggered);
goto fail;
}
}
+ put_online_cpus();
return cpu_events;
fail:
- for_each_possible_cpu(cpu) {
+ for_each_online_cpu(cpu) {
pevent = per_cpu_ptr(cpu_events, cpu);
if (IS_ERR(*pevent))
break;
unregister_hw_breakpoint(*pevent);
}
+ put_online_cpus();
+
free_percpu(cpu_events);
- /* return the error if any */
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint);
#include <linux/console.h>
#include <linux/vmalloc.h>
#include <linux/swap.h>
+#include <linux/kmsg_dump.h>
#include <asm/page.h>
#include <asm/uaccess.h>
if (mutex_trylock(&kexec_mutex)) {
if (kexec_crash_image) {
struct pt_regs fixed_regs;
+
+ kmsg_dump(KMSG_DUMP_KEXEC);
+
crash_setup_regs(&fixed_regs, regs);
crash_save_vmcoreinfo();
machine_crash_shutdown(&fixed_regs);
#include <linux/log2.h>
#include <linux/uaccess.h>
-static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+static void _kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size)
{
fifo->buffer = buffer;
* kfifo_init - initialize a FIFO using a preallocated buffer
* @fifo: the fifo to assign the buffer
* @buffer: the preallocated buffer to be used.
- * @size: the size of the internal buffer, this have to be a power of 2.
+ * @size: the size of the internal buffer, this has to be a power of 2.
*
*/
-void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size)
+void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size)
{
/* size must be a power of 2 */
BUG_ON(!is_power_of_2(size));
memcpy(to + l, fifo->buffer, len - l);
}
-static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned int off)
+static inline int __kfifo_from_user_data(struct kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned int off,
+ unsigned *lenout)
{
unsigned int l;
int ret;
/* first put the data starting from fifo->in to buffer end */
l = min(len, fifo->size - off);
ret = copy_from_user(fifo->buffer + off, from, l);
-
- if (unlikely(ret))
- return ret + len - l;
+ if (unlikely(ret)) {
+ *lenout = ret;
+ return -EFAULT;
+ }
+ *lenout = l;
/* then put the rest (if any) at the beginning of the buffer */
- return copy_from_user(fifo->buffer, from + l, len - l);
+ ret = copy_from_user(fifo->buffer, from + l, len - l);
+ *lenout += ret ? ret : len - l;
+ return ret ? -EFAULT : 0;
}
-static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned int off)
+static inline int __kfifo_to_user_data(struct kfifo *fifo,
+ void __user *to, unsigned int len, unsigned int off, unsigned *lenout)
{
unsigned int l;
int ret;
/* first get the data from fifo->out until the end of the buffer */
l = min(len, fifo->size - off);
ret = copy_to_user(to, fifo->buffer + off, l);
-
- if (unlikely(ret))
- return ret + len - l;
+ *lenout = l;
+ if (unlikely(ret)) {
+ *lenout -= ret;
+ return -EFAULT;
+ }
/* then get the rest (if any) from the beginning of the buffer */
- return copy_to_user(to + l, fifo->buffer, len - l);
+ len -= l;
+ ret = copy_to_user(to + l, fifo->buffer, len);
+ if (unlikely(ret)) {
+ *lenout += len - ret;
+ return -EFAULT;
+ }
+ *lenout += len;
+ return 0;
}
unsigned int __kfifo_in_n(struct kfifo *fifo,
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from,
+unsigned int kfifo_in(struct kfifo *fifo, const void *from,
unsigned int len)
{
len = min(kfifo_avail(fifo), len);
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len)
+unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len)
{
len = min(kfifo_len(fifo), len);
}
EXPORT_SYMBOL(kfifo_out);
+/**
+ * kfifo_out_peek - copy some data from the FIFO, but do not remove it
+ * @fifo: the fifo to be used.
+ * @to: where the data must be copied.
+ * @len: the size of the destination buffer.
+ * @offset: offset into the fifo
+ *
+ * This function copies at most @len bytes at @offset from the FIFO
+ * into the @to buffer and returns the number of copied bytes.
+ * The data is not removed from the FIFO.
+ */
+unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len,
+ unsigned offset)
+{
+ len = min(kfifo_len(fifo), len + offset);
+
+ __kfifo_out_data(fifo, to, len, offset);
+ return len;
+}
+EXPORT_SYMBOL(kfifo_out_peek);
+
unsigned int __kfifo_out_generic(struct kfifo *fifo,
void *to, unsigned int len, unsigned int recsize,
unsigned int *total)
unsigned int __kfifo_from_user_n(struct kfifo *fifo,
const void __user *from, unsigned int len, unsigned int recsize)
{
+ unsigned total;
+
if (kfifo_avail(fifo) < len + recsize)
return len + 1;
- return __kfifo_from_user_data(fifo, from, len, recsize);
+ __kfifo_from_user_data(fifo, from, len, recsize, &total);
+ return total;
}
EXPORT_SYMBOL(__kfifo_from_user_n);
* @len: the length of the data to be added.
*
* This function copies at most @len bytes from the @from into the
- * FIFO depending and returns the number of copied bytes.
+ * FIFO depending and returns -EFAULT/0.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int len)
+int kfifo_from_user(struct kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned *total)
{
+ int ret;
len = min(kfifo_avail(fifo), len);
- len -= __kfifo_from_user_data(fifo, from, len, 0);
+ ret = __kfifo_from_user_data(fifo, from, len, 0, total);
+ if (ret)
+ return ret;
__kfifo_add_in(fifo, len);
- return len;
+ return 0;
}
EXPORT_SYMBOL(kfifo_from_user);
void __user *to, unsigned int len, unsigned int reclen,
unsigned int recsize)
{
- unsigned int ret;
+ unsigned int ret, total;
if (kfifo_len(fifo) < reclen + recsize)
return len;
- ret = __kfifo_to_user_data(fifo, to, reclen, recsize);
+ ret = __kfifo_to_user_data(fifo, to, reclen, recsize, &total);
if (likely(ret == 0))
__kfifo_add_out(fifo, reclen + recsize);
- return ret;
+ return total;
}
EXPORT_SYMBOL(__kfifo_to_user_n);
* @fifo: the fifo to be used.
* @to: where the data must be copied.
* @len: the size of the destination buffer.
+ @ @lenout: pointer to output variable with copied data
*
* This function copies at most @len bytes from the FIFO into the
- * @to buffer and returns the number of copied bytes.
+ * @to buffer and 0 or -EFAULT.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int len)
+int kfifo_to_user(struct kfifo *fifo,
+ void __user *to, unsigned int len, unsigned *lenout)
{
+ int ret;
len = min(kfifo_len(fifo), len);
- len -= __kfifo_to_user_data(fifo, to, len, 0);
- __kfifo_add_out(fifo, len);
- return len;
+ ret = __kfifo_to_user_data(fifo, to, len, 0, lenout);
+ __kfifo_add_out(fifo, *lenout);
+ return ret;
}
EXPORT_SYMBOL(kfifo_to_user);
return -ENOMEM;
ret = call_usermodehelper_stdinpipe(sub_info, filp);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ call_usermodehelper_freeinfo(sub_info);
+ return ret;
+ }
- return call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC);
+ ret = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC);
+ if (ret < 0) /* Failed to execute helper, close pipe */
+ filp_close(*filp, NULL);
- out:
- call_usermodehelper_freeinfo(sub_info);
return ret;
}
EXPORT_SYMBOL(call_usermodehelper_pipe);
/* Pre-allocate memory for max kretprobe instances */
if (rp->maxactive <= 0) {
#ifdef CONFIG_PREEMPT
- rp->maxactive = max(10, 2 * num_possible_cpus());
+ rp->maxactive = max_t(unsigned int, 10, 2*num_possible_cpus());
#else
rp->maxactive = num_possible_cpus();
#endif
* J. Corbet <corbet@lwn.net>
*/
#if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
+
+static inline bool sect_empty(const Elf_Shdr *sect)
+{
+ return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0;
+}
+
struct module_sect_attr
{
struct module_attribute mattr;
/* Count loaded sections and allocate structures */
for (i = 0; i < nsect; i++)
- if (sechdrs[i].sh_flags & SHF_ALLOC
- && sechdrs[i].sh_size)
+ if (!sect_empty(&sechdrs[i]))
nloaded++;
size[0] = ALIGN(sizeof(*sect_attrs)
+ nloaded * sizeof(sect_attrs->attrs[0]),
sattr = §_attrs->attrs[0];
gattr = §_attrs->grp.attrs[0];
for (i = 0; i < nsect; i++) {
- if (! (sechdrs[i].sh_flags & SHF_ALLOC))
- continue;
- if (!sechdrs[i].sh_size)
+ if (sect_empty(&sechdrs[i]))
continue;
sattr->address = sechdrs[i].sh_addr;
sattr->name = kstrdup(secstrings + sechdrs[i].sh_name,
/* Count notes sections and allocate structures. */
notes = 0;
for (i = 0; i < nsect; i++)
- if ((sechdrs[i].sh_flags & SHF_ALLOC) &&
+ if (!sect_empty(&sechdrs[i]) &&
(sechdrs[i].sh_type == SHT_NOTE))
++notes;
notes_attrs->notes = notes;
nattr = ¬es_attrs->attrs[0];
for (loaded = i = 0; i < nsect; ++i) {
- if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+ if (sect_empty(&sechdrs[i]))
continue;
if (sechdrs[i].sh_type == SHT_NOTE) {
nattr->attr.name = mod->sect_attrs->attrs[loaded].name;
dump_stack();
#endif
- kmsg_dump(KMSG_DUMP_PANIC);
/*
* If we have crashed and we have a crash kernel loaded let it handle
* everything else.
*/
crash_kexec(NULL);
+ kmsg_dump(KMSG_DUMP_PANIC);
+
/*
* Note smp_send_stop is the usual smp shutdown function, which
* unfortunately means it may not be hardened to work in a panic
static int perf_event_task_match(struct perf_event *event)
{
+ if (event->state != PERF_EVENT_STATE_ACTIVE)
+ return 0;
+
if (event->cpu != -1 && event->cpu != smp_processor_id())
return 0;
static int perf_event_comm_match(struct perf_event *event)
{
+ if (event->state != PERF_EVENT_STATE_ACTIVE)
+ return 0;
+
if (event->cpu != -1 && event->cpu != smp_processor_id())
return 0;
static int perf_event_mmap_match(struct perf_event *event,
struct perf_mmap_event *mmap_event)
{
+ if (event->state != PERF_EVENT_STATE_ACTIVE)
+ return 0;
+
if (event->cpu != -1 && event->cpu != smp_processor_id())
return 0;
GFP_KERNEL);
if (!child_ctx) {
ret = -ENOMEM;
- goto exit;
+ break;
}
__perf_event_init_context(child_ctx, child);
}
}
- if (inherited_all) {
+ if (child_ctx && inherited_all) {
/*
* Mark the child context as a clone of the parent
* context, or of whatever the parent is a clone of.
get_ctx(child_ctx->parent_ctx);
}
-exit:
mutex_unlock(&parent_ctx->mutex);
perf_unpin_context(parent_ctx);
static const char const *kmsg_reasons[] = {
[KMSG_DUMP_OOPS] = "oops",
[KMSG_DUMP_PANIC] = "panic",
+ [KMSG_DUMP_KEXEC] = "kexec",
};
static const char *kmsg_to_str(enum kmsg_dump_reason reason)
post_schedule(rq);
- if (unlikely(reacquire_kernel_lock(current) < 0))
+ if (unlikely(reacquire_kernel_lock(current) < 0)) {
+ prev = rq->curr;
+ switch_count = &prev->nivcsw;
goto need_resched_nonpreemptible;
+ }
preempt_enable_no_resched();
if (need_resched())
* If there's an idle sibling in this domain, make that
* the wake_affine target instead of the current cpu.
*/
- if (tmp->flags & SD_PREFER_SIBLING)
+ if (tmp->flags & SD_SHARE_PKG_RESOURCES)
target = select_idle_sibling(p, tmp, target);
if (target >= 0) {
for (i = 0; i < 16; i++) {
unsigned char insn;
- __get_user(insn, (unsigned char *)(regs->ip + i));
+ if (get_user(insn, (unsigned char *)(regs->ip + i)))
+ break;
printk("%02x ", insn);
}
}
goto call;
/* Try for same node. */
- nodemask = cpumask_of_node(cpu);
+ nodemask = cpumask_of_node(cpu_to_node(cpu));
for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids;
cpu = cpumask_next_and(cpu, nodemask, mask)) {
if (cpu_online(cpu))
cpu = *((int *)arg);
list_for_each_entry_safe(dev, tmp, &clockevent_devices, list) {
if (cpumask_test_cpu(cpu, dev->cpumask) &&
- cpumask_weight(dev->cpumask) == 1) {
+ cpumask_weight(dev->cpumask) == 1 &&
+ !tick_is_broadcast_device(dev)) {
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
list_del(&dev->list);
}
run_local_timers();
rcu_check_callbacks(cpu, user_tick);
printk_tick();
+ perf_event_do_pending();
scheduler_tick();
run_posix_cpu_timers(p);
}
{
struct tvec_base *base = __get_cpu_var(tvec_bases);
- perf_event_do_pending();
-
hrtimer_run_pending();
if (time_after_eq(jiffies, base->timer_jiffies))
config HAVE_FTRACE_NMI_ENTER
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_TRACER
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_GRAPH_TRACER
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_GRAPH_FP_TEST
bool
config HAVE_FUNCTION_TRACE_MCOUNT_TEST
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config HAVE_DYNAMIC_FTRACE
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config HAVE_FTRACE_MCOUNT_RECORD
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config HAVE_HW_BRANCH_TRACER
bool
config HAVE_SYSCALL_TRACEPOINTS
bool
help
- See Documentation/trace/ftrace-implementation.txt
+ See Documentation/trace/ftrace-design.txt
config TRACER_MAX_TRACE
bool
# This allows those options to appear when no other tracer is selected. But the
# options do not appear when something else selects it. We need the two options
# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
-# hidding of the automatic options.
+# hiding of the automatic options.
config TRACING
bool
bool "Tracers"
default y if DEBUG_KERNEL
help
- Enable the kernel tracing infrastructure.
+ Enable the kernel tracing infrastructure.
if FTRACE
help
Enable the kernel to trace every kernel function. This is done
by using a compiler feature to insert a small, 5-byte No-Operation
- instruction to the beginning of every kernel function, which NOP
+ instruction at the beginning of every kernel function, which NOP
sequence is then dynamically patched into a tracer call when
tracing is enabled by the administrator. If it's runtime disabled
(the bootup default), then the overhead of the instructions is very
and its entry.
Its first purpose is to trace the duration of functions and
draw a call graph for each thread with some information like
- the return value. This is done by setting the current return
+ the return value. This is done by setting the current return
address on the current task structure into a stack of calls.
echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
- (Note that kernel size and overhead increases with this option
+ (Note that kernel size and overhead increase with this option
enabled. This option and the preempt-off timing option can be
used together or separately.)
select TRACER_MAX_TRACE
select RING_BUFFER_ALLOW_SWAP
help
- This option measures the time spent in preemption off critical
+ This option measures the time spent in preemption-off critical
sections, with microsecond accuracy.
The default measurement method is a maximum search, which is
echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
- (Note that kernel size and overhead increases with this option
+ (Note that kernel size and overhead increase with this option
enabled. This option and the irqs-off timing option can be
used together or separately.)
depends on !GENERIC_TRACER
select TRACING
help
- This tracer hooks to various trace points in the kernel
+ This tracer hooks to various trace points in the kernel,
allowing the user to pick and choose which trace point they
want to trace. It also includes the sched_switch tracer plugin.
The likely/unlikely profiler only looks at the conditions that
are annotated with a likely or unlikely macro.
- The "all branch" profiler will profile every if statement in the
+ The "all branch" profiler will profile every if-statement in the
kernel. This profiler will also enable the likely/unlikely
- profiler as well.
+ profiler.
- Either of the above profilers add a bit of overhead to the system.
- If unsure choose "No branch profiling".
+ Either of the above profilers adds a bit of overhead to the system.
+ If unsure, choose "No branch profiling".
config BRANCH_PROFILE_NONE
bool "No branch profiling"
help
- No branch profiling. Branch profiling adds a bit of overhead.
- Only enable it if you want to analyse the branching behavior.
- Otherwise keep it disabled.
+ No branch profiling. Branch profiling adds a bit of overhead.
+ Only enable it if you want to analyse the branching behavior.
+ Otherwise keep it disabled.
config PROFILE_ANNOTATED_BRANCHES
bool "Trace likely/unlikely profiler"
/sys/kernel/debug/tracing/profile_annotated_branch
- Note: this will add a significant overhead, only turn this
+ Note: this will add a significant overhead; only turn this
on if you need to profile the system's use of these macros.
config PROFILE_ALL_BRANCHES
This configuration, when enabled, will impose a great overhead
on the system. This should only be enabled when the system
- is to be analyzed
+ is to be analyzed in much detail.
endchoice
config TRACING_BRANCHES
depends on X86
select GENERIC_TRACER
help
- This tracer helps developers to analyze and optimize the kernels
+ This tracer helps developers to analyze and optimize the kernel's
power management decisions, specifically the C-state and P-state
behavior.
select GENERIC_TRACER
help
This tracer records all branches on the system in a circular
- buffer giving access to the last N branches for each cpu.
+ buffer, giving access to the last N branches for each cpu.
config KMEMTRACE
bool "Trace SLAB allocations"
select GENERIC_TRACER
help
kmemtrace provides tracing for slab allocator functions, such as
- kmalloc, kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected
+ kmalloc, kfree, kmem_cache_alloc, kmem_cache_free, etc. Collected
data is then fed to the userspace application in order to analyse
allocation hotspots, internal fragmentation and so on, making it
possible to see how well an allocator performs, as well as debug
bool "Trace workqueues"
select GENERIC_TRACER
help
- The workqueue tracer provides some statistical informations
+ The workqueue tracer provides some statistical information
about each cpu workqueue thread such as the number of the
works inserted and executed since their creation. It can help
- to evaluate the amount of work each of them have to perform.
+ to evaluate the amount of work each of them has to perform.
For example it can help a developer to decide whether he should
- choose a per cpu workqueue instead of a singlethreaded one.
+ choose a per-cpu workqueue instead of a singlethreaded one.
config BLK_DEV_IO_TRACE
- bool "Support for tracing block io actions"
+ bool "Support for tracing block IO actions"
depends on SYSFS
depends on BLOCK
select RELAY
select TRACING
default y
help
- This allows the user to add tracing events (similar to tracepoints) on the fly
- via the ftrace interface. See Documentation/trace/kprobetrace.txt
- for more details.
+ This allows the user to add tracing events (similar to tracepoints)
+ on the fly via the ftrace interface. See
+ Documentation/trace/kprobetrace.txt for more details.
Those events can be inserted wherever kprobes can probe, and record
various register and memory values.
- This option is also required by perf-probe subcommand of perf tools. If
- you want to use perf tools, this option is strongly recommended.
+ This option is also required by perf-probe subcommand of perf tools.
+ If you want to use perf tools, this option is strongly recommended.
config DYNAMIC_FTRACE
bool "enable/disable ftrace tracepoints dynamically"
depends on HAVE_DYNAMIC_FTRACE
default y
help
- This option will modify all the calls to ftrace dynamically
- (will patch them out of the binary image and replaces them
- with a No-Op instruction) as they are called. A table is
- created to dynamically enable them again.
+ This option will modify all the calls to ftrace dynamically
+ (will patch them out of the binary image and replace them
+ with a No-Op instruction) as they are called. A table is
+ created to dynamically enable them again.
- This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but otherwise
- has native performance as long as no tracing is active.
+ This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
+ otherwise has native performance as long as no tracing is active.
- The changes to the code are done by a kernel thread that
- wakes up once a second and checks to see if any ftrace calls
- were made. If so, it runs stop_machine (stops all CPUS)
- and modifies the code to jump over the call to ftrace.
+ The changes to the code are done by a kernel thread that
+ wakes up once a second and checks to see if any ftrace calls
+ were made. If so, it runs stop_machine (stops all CPUS)
+ and modifies the code to jump over the call to ftrace.
config FUNCTION_PROFILER
bool "Kernel function profiler"
depends on FUNCTION_TRACER
default n
help
- This option enables the kernel function profiler. A file is created
- in debugfs called function_profile_enabled which defaults to zero.
- When a 1 is echoed into this file profiling begins, and when a
- zero is entered, profiling stops. A file in the trace_stats
- directory called functions, that show the list of functions that
- have been hit and their counters.
+ This option enables the kernel function profiler. A file is created
+ in debugfs called function_profile_enabled which defaults to zero.
+ When a 1 is echoed into this file profiling begins, and when a
+ zero is entered, profiling stops. A "functions" file is created in
+ the trace_stats directory; this file shows the list of functions that
+ have been hit and their counters.
- If in doubt, say N
+ If in doubt, say N.
config FTRACE_MCOUNT_RECORD
def_bool y
tristate "Ring buffer benchmark stress tester"
depends on RING_BUFFER
help
- This option creates a test to stress the ring buffer and bench mark it.
- It creates its own ring buffer such that it will not interfer with
+ This option creates a test to stress the ring buffer and benchmark it.
+ It creates its own ring buffer such that it will not interfere with
any other users of the ring buffer (such as ftrace). It then creates
a producer and consumer that will run for 10 seconds and sleep for
10 seconds. Each interval it will print out the number of events
It does not disable interrupts or raise its priority, so it may be
affected by processes that are running.
- If unsure, say N
+ If unsure, say N.
endif # FTRACE
static int ftrace_match(char *str, char *regex, int len, int type)
{
int matched = 0;
- char *ptr;
+ int slen;
switch (type) {
case MATCH_FULL:
matched = 1;
break;
case MATCH_END_ONLY:
- ptr = strstr(str, regex);
- if (ptr && (ptr[len] == 0))
+ slen = strlen(str);
+ if (slen >= len && memcmp(str + slen - len, regex, len) == 0)
matched = 1;
break;
}
* Splice the empty reader page into the list around the head.
*/
reader = rb_set_head_page(cpu_buffer);
- cpu_buffer->reader_page->list.next = reader->list.next;
+ cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
cpu_buffer->reader_page->list.prev = reader->list.prev;
/*
*
* Now make the new head point back to the reader page.
*/
- reader->list.next->prev = &cpu_buffer->reader_page->list;
+ rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
/* Finally update the reader page to the new head */
if (!!(topt->flags->val & topt->opt->bit) != val) {
mutex_lock(&trace_types_lock);
ret = __set_tracer_option(current_trace, topt->flags,
- topt->opt, val);
+ topt->opt, !val);
mutex_unlock(&trace_types_lock);
if (ret)
return ret;
{
char **addr = (char **)(event + pred->offset);
int cmp, match;
+ int len = strlen(*addr) + 1; /* including tailing '\0' */
- cmp = pred->regex.match(*addr, &pred->regex, pred->regex.field_len);
+ cmp = pred->regex.match(*addr, &pred->regex, len);
match = cmp ^ pred->not;
return 0;
}
-/* Basic regex callbacks */
+/*
+ * regex_match_foo - Basic regex callbacks
+ *
+ * @str: the string to be searched
+ * @r: the regex structure containing the pattern string
+ * @len: the length of the string to be searched (including '\0')
+ *
+ * Note:
+ * - @str might not be NULL-terminated if it's of type DYN_STRING
+ * or STATIC_STRING
+ */
+
static int regex_match_full(char *str, struct regex *r, int len)
{
if (strncmp(str, r->pattern, len) == 0)
static int regex_match_front(char *str, struct regex *r, int len)
{
- if (strncmp(str, r->pattern, len) == 0)
+ if (strncmp(str, r->pattern, r->len) == 0)
return 1;
return 0;
}
static int regex_match_middle(char *str, struct regex *r, int len)
{
- if (strstr(str, r->pattern))
+ if (strnstr(str, r->pattern, len))
return 1;
return 0;
}
static int regex_match_end(char *str, struct regex *r, int len)
{
- char *ptr = strstr(str, r->pattern);
+ int strlen = len - 1;
- if (ptr && (ptr[r->len] == 0))
+ if (strlen >= r->len &&
+ memcmp(str + strlen - r->len, r->pattern, r->len) == 0)
return 1;
return 0;
}
pred->regex.field_len = field->size;
} else if (field->filter_type == FILTER_DYN_STRING)
fn = filter_pred_strloc;
- else {
+ else
fn = filter_pred_pchar;
- pred->regex.field_len = strlen(pred->regex.pattern);
- }
} else {
if (field->is_signed)
ret = strict_strtoll(pred->regex.pattern, 0, &val);
BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \
ret = trace_define_field(event_call, #type "[" #len "]", #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), 0, FILTER_OTHER); \
+ sizeof(field.item), \
+ is_signed_type(type), FILTER_OTHER); \
if (ret) \
return ret;
ret = trace_define_field(event_call, #type "[" #len "]", #item, \
offsetof(typeof(field), \
container.item), \
- sizeof(field.container.item), 0, \
- FILTER_OTHER); \
+ sizeof(field.container.item), \
+ is_signed_type(type), FILTER_OTHER); \
if (ret) \
return ret;
#undef SHOW_FIELD
#define SHOW_FIELD(type, item, name) \
do { \
- ret = trace_seq_printf(s, "\tfield: " #type " %s;\t" \
- "offset:%u;\tsize:%u;\n", name, \
+ ret = trace_seq_printf(s, "\tfield:" #type " %s;\t" \
+ "offset:%u;\tsize:%u;\tsigned:%d;\n", name,\
(unsigned int)offsetof(typeof(field), item),\
- (unsigned int)sizeof(type)); \
+ (unsigned int)sizeof(type), \
+ is_signed_type(type)); \
if (!ret) \
return 0; \
} while (0)
#include <linux/fs.h>
#include "trace_output.h"
-#include "trace_stat.h"
#include "trace.h"
#include <linux/hw_breakpoint.h>
#include <asm/hw_breakpoint.h>
+#include <asm/atomic.h>
+
/*
* For now, let us restrict the no. of symbols traced simultaneously to number
* of available hardware breakpoint registers.
struct perf_event **ksym_hbp;
struct perf_event_attr attr;
#ifdef CONFIG_PROFILE_KSYM_TRACER
- unsigned long counter;
+ atomic64_t counter;
#endif
struct hlist_node ksym_hlist;
};
rcu_read_lock();
hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) {
- if ((entry->attr.bp_addr == hbp_hit_addr) &&
- (entry->counter <= MAX_UL_INT)) {
- entry->counter++;
+ if (entry->attr.bp_addr == hbp_hit_addr) {
+ atomic64_inc(&entry->counter);
break;
}
}
entry->attr.bp_addr = addr;
entry->attr.bp_len = HW_BREAKPOINT_LEN_4;
- ret = -EAGAIN;
entry->ksym_hbp = register_wide_hw_breakpoint(&entry->attr,
ksym_hbp_handler);
* 2: echo 0 > ksym_trace_filter
* 3: echo "*:---" > ksym_trace_filter
*/
- if (!buf[0] || !strcmp(buf, "0") ||
- !strcmp(buf, "*:---")) {
+ if (!input_string[0] || !strcmp(input_string, "0") ||
+ !strcmp(input_string, "*:---")) {
__ksym_trace_reset();
ret = 0;
goto out;
.print_line = ksym_trace_output
};
-__init static int init_ksym_trace(void)
-{
- struct dentry *d_tracer;
- struct dentry *entry;
-
- d_tracer = tracing_init_dentry();
- ksym_filter_entry_count = 0;
-
- entry = debugfs_create_file("ksym_trace_filter", 0644, d_tracer,
- NULL, &ksym_tracing_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'ksym_trace_filter' file\n");
-
- return register_tracer(&ksym_tracer);
-}
-device_initcall(init_ksym_trace);
-
-
#ifdef CONFIG_PROFILE_KSYM_TRACER
-static int ksym_tracer_stat_headers(struct seq_file *m)
+static int ksym_profile_show(struct seq_file *m, void *v)
{
+ struct hlist_node *node;
+ struct trace_ksym *entry;
+ int access_type = 0;
+ char fn_name[KSYM_NAME_LEN];
+
seq_puts(m, " Access Type ");
seq_puts(m, " Symbol Counter\n");
seq_puts(m, " ----------- ");
seq_puts(m, " ------ -------\n");
- return 0;
-}
-static int ksym_tracer_stat_show(struct seq_file *m, void *v)
-{
- struct hlist_node *stat = v;
- struct trace_ksym *entry;
- int access_type = 0;
- char fn_name[KSYM_NAME_LEN];
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) {
- entry = hlist_entry(stat, struct trace_ksym, ksym_hlist);
+ access_type = entry->attr.bp_type;
- access_type = entry->attr.bp_type;
+ switch (access_type) {
+ case HW_BREAKPOINT_R:
+ seq_puts(m, " R ");
+ break;
+ case HW_BREAKPOINT_W:
+ seq_puts(m, " W ");
+ break;
+ case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
+ seq_puts(m, " RW ");
+ break;
+ default:
+ seq_puts(m, " NA ");
+ }
- switch (access_type) {
- case HW_BREAKPOINT_R:
- seq_puts(m, " R ");
- break;
- case HW_BREAKPOINT_W:
- seq_puts(m, " W ");
- break;
- case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
- seq_puts(m, " RW ");
- break;
- default:
- seq_puts(m, " NA ");
+ if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0)
+ seq_printf(m, " %-36s", fn_name);
+ else
+ seq_printf(m, " %-36s", "<NA>");
+ seq_printf(m, " %15llu\n",
+ (unsigned long long)atomic64_read(&entry->counter));
}
-
- if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0)
- seq_printf(m, " %-36s", fn_name);
- else
- seq_printf(m, " %-36s", "<NA>");
- seq_printf(m, " %15lu\n", entry->counter);
+ rcu_read_unlock();
return 0;
}
-static void *ksym_tracer_stat_start(struct tracer_stat *trace)
+static int ksym_profile_open(struct inode *node, struct file *file)
{
- return ksym_filter_head.first;
-}
-
-static void *
-ksym_tracer_stat_next(void *v, int idx)
-{
- struct hlist_node *stat = v;
-
- return stat->next;
+ return single_open(file, ksym_profile_show, NULL);
}
-static struct tracer_stat ksym_tracer_stats = {
- .name = "ksym_tracer",
- .stat_start = ksym_tracer_stat_start,
- .stat_next = ksym_tracer_stat_next,
- .stat_headers = ksym_tracer_stat_headers,
- .stat_show = ksym_tracer_stat_show
+static const struct file_operations ksym_profile_fops = {
+ .open = ksym_profile_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
};
+#endif /* CONFIG_PROFILE_KSYM_TRACER */
-__init static int ksym_tracer_stat_init(void)
+__init static int init_ksym_trace(void)
{
- int ret;
+ struct dentry *d_tracer;
- ret = register_stat_tracer(&ksym_tracer_stats);
- if (ret) {
- printk(KERN_WARNING "Warning: could not register "
- "ksym tracer stats\n");
- return 1;
- }
+ d_tracer = tracing_init_dentry();
- return 0;
+ trace_create_file("ksym_trace_filter", 0644, d_tracer,
+ NULL, &ksym_tracing_fops);
+
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+ trace_create_file("ksym_profile", 0444, d_tracer,
+ NULL, &ksym_profile_fops);
+#endif
+
+ return register_tracer(&ksym_tracer);
}
-fs_initcall(ksym_tracer_stat_init);
-#endif /* CONFIG_PROFILE_KSYM_TRACER */
+device_initcall(init_ksym_trace);
config DECOMPRESS_LZMA
tristate
+config DECOMPRESS_LZO
+ select LZO_DECOMPRESS
+ tristate
+
#
# Generic allocator support is selected if needed
#
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- string_helpers.o gcd.o
+ string_helpers.o gcd.o list_sort.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
+lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
#include <linux/decompress/bunzip2.h>
#include <linux/decompress/unlzma.h>
#include <linux/decompress/inflate.h>
+#include <linux/decompress/unlzo.h>
#include <linux/types.h>
#include <linux/string.h>
#ifndef CONFIG_DECOMPRESS_LZMA
# define unlzma NULL
#endif
+#ifndef CONFIG_DECOMPRESS_LZO
+# define unlzo NULL
+#endif
static const struct compress_format {
unsigned char magic[2];
{ {037, 0236}, "gzip", gunzip },
{ {0x42, 0x5a}, "bzip2", bunzip2 },
{ {0x5d, 0x00}, "lzma", unlzma },
+ { {0x89, 0x4c}, "lzo", unlzo },
{ {0, 0}, NULL, NULL }
};
--- /dev/null
+/*
+ * LZO decompressor for the Linux kernel. Code borrowed from the lzo
+ * implementation by Markus Franz Xaver Johannes Oberhumer.
+ *
+ * Linux kernel adaptation:
+ * Copyright (C) 2009
+ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
+ *
+ * Original code:
+ * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ * All Rights Reserved.
+ *
+ * lzop and the LZO library are free software; you can redistribute them
+ * and/or modify them under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Markus F.X.J. Oberhumer
+ * <markus@oberhumer.com>
+ * http://www.oberhumer.com/opensource/lzop/
+ */
+
+#ifdef STATIC
+#include "lzo/lzo1x_decompress.c"
+#else
+#include <linux/slab.h>
+#include <linux/decompress/unlzo.h>
+#endif
+
+#include <linux/types.h>
+#include <linux/lzo.h>
+#include <linux/decompress/mm.h>
+
+#include <linux/compiler.h>
+#include <asm/unaligned.h>
+
+static const unsigned char lzop_magic[] = {
+ 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a };
+
+#define LZO_BLOCK_SIZE (256*1024l)
+#define HEADER_HAS_FILTER 0x00000800L
+
+STATIC inline int INIT parse_header(u8 *input, u8 *skip)
+{
+ int l;
+ u8 *parse = input;
+ u8 level = 0;
+ u16 version;
+
+ /* read magic: 9 first bits */
+ for (l = 0; l < 9; l++) {
+ if (*parse++ != lzop_magic[l])
+ return 0;
+ }
+ /* get version (2bytes), skip library version (2),
+ * 'need to be extracted' version (2) and
+ * method (1) */
+ version = get_unaligned_be16(parse);
+ parse += 7;
+ if (version >= 0x0940)
+ level = *parse++;
+ if (get_unaligned_be32(parse) & HEADER_HAS_FILTER)
+ parse += 8; /* flags + filter info */
+ else
+ parse += 4; /* flags */
+
+ /* skip mode and mtime_low */
+ parse += 8;
+ if (version >= 0x0940)
+ parse += 4; /* skip mtime_high */
+
+ l = *parse++;
+ /* don't care about the file name, and skip checksum */
+ parse += l + 4;
+
+ *skip = parse - input;
+ return 1;
+}
+
+STATIC inline int INIT unlzo(u8 *input, int in_len,
+ int (*fill) (void *, unsigned int),
+ int (*flush) (void *, unsigned int),
+ u8 *output, int *posp,
+ void (*error_fn) (char *x))
+{
+ u8 skip = 0, r = 0;
+ u32 src_len, dst_len;
+ size_t tmp;
+ u8 *in_buf, *in_buf_save, *out_buf;
+ int obytes_processed = 0;
+
+ set_error_fn(error_fn);
+
+ if (output) {
+ out_buf = output;
+ } else if (!flush) {
+ error("NULL output pointer and no flush function provided");
+ goto exit;
+ } else {
+ out_buf = malloc(LZO_BLOCK_SIZE);
+ if (!out_buf) {
+ error("Could not allocate output buffer");
+ goto exit;
+ }
+ }
+
+ if (input && fill) {
+ error("Both input pointer and fill function provided, don't know what to do");
+ goto exit_1;
+ } else if (input) {
+ in_buf = input;
+ } else if (!fill || !posp) {
+ error("NULL input pointer and missing position pointer or fill function");
+ goto exit_1;
+ } else {
+ in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE));
+ if (!in_buf) {
+ error("Could not allocate input buffer");
+ goto exit_1;
+ }
+ }
+ in_buf_save = in_buf;
+
+ if (posp)
+ *posp = 0;
+
+ if (fill)
+ fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
+
+ if (!parse_header(input, &skip)) {
+ error("invalid header");
+ goto exit_2;
+ }
+ in_buf += skip;
+
+ if (posp)
+ *posp = skip;
+
+ for (;;) {
+ /* read uncompressed block size */
+ dst_len = get_unaligned_be32(in_buf);
+ in_buf += 4;
+
+ /* exit if last block */
+ if (dst_len == 0) {
+ if (posp)
+ *posp += 4;
+ break;
+ }
+
+ if (dst_len > LZO_BLOCK_SIZE) {
+ error("dest len longer than block size");
+ goto exit_2;
+ }
+
+ /* read compressed block size, and skip block checksum info */
+ src_len = get_unaligned_be32(in_buf);
+ in_buf += 8;
+
+ if (src_len <= 0 || src_len > dst_len) {
+ error("file corrupted");
+ goto exit_2;
+ }
+
+ /* decompress */
+ tmp = dst_len;
+ r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
+ out_buf, &tmp);
+
+ if (r != LZO_E_OK || dst_len != tmp) {
+ error("Compressed data violation");
+ goto exit_2;
+ }
+
+ obytes_processed += dst_len;
+ if (flush)
+ flush(out_buf, dst_len);
+ if (output)
+ out_buf += dst_len;
+ if (posp)
+ *posp += src_len + 12;
+ if (fill) {
+ in_buf = in_buf_save;
+ fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
+ } else
+ in_buf += src_len;
+ }
+
+exit_2:
+ if (!input)
+ free(in_buf);
+exit_1:
+ if (!output)
+ free(out_buf);
+exit:
+ return obytes_processed;
+}
+
+#define decompress unlzo
return count;
}
-static int dma_debug_device_change(struct notifier_block *nb,
- unsigned long action, void *data)
+static int dma_debug_device_change(struct notifier_block *nb, unsigned long action, void *data)
{
struct device *dev = data;
int count;
+ if (global_disable)
+ return 0;
switch (action) {
case BUS_NOTIFY_UNBOUND_DRIVER:
{
struct notifier_block *nb;
+ if (global_disable)
+ return;
+
nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
if (nb == NULL) {
pr_err("dma_debug_add_bus: out of memory\n");
ref->size);
}
+ if (entry->direction == DMA_BIDIRECTIONAL)
+ goto out;
+
if (ref->direction != entry->direction) {
err_printk(dev, entry, "DMA-API: device driver syncs "
"DMA memory with different direction "
dir2name[ref->direction]);
}
- if (entry->direction == DMA_BIDIRECTIONAL)
- goto out;
-
if (to_cpu && !(entry->direction == DMA_FROM_DEVICE) &&
!(ref->direction == DMA_TO_DEVICE))
err_printk(dev, entry, "DMA-API: device driver syncs "
out:
put_hash_bucket(bucket, &flags);
-
}
void debug_dma_map_page(struct device *dev, struct page *page, size_t offset,
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list_sort.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+/**
+ * list_sort - sort a list.
+ * @priv: private data, passed to @cmp
+ * @head: the list to sort
+ * @cmp: the elements comparison function
+ *
+ * This function has been implemented by Mark J Roberts <mjr@znex.org>. It
+ * implements "merge sort" which has O(nlog(n)) complexity. The list is sorted
+ * in ascending order.
+ *
+ * The comparison function @cmp is supposed to return a negative value if @a is
+ * less than @b, and a positive value if @a is greater than @b. If @a and @b
+ * are equivalent, then it does not matter what this function returns.
+ */
+void list_sort(void *priv, struct list_head *head,
+ int (*cmp)(void *priv, struct list_head *a,
+ struct list_head *b))
+{
+ struct list_head *p, *q, *e, *list, *tail, *oldhead;
+ int insize, nmerges, psize, qsize, i;
+
+ if (list_empty(head))
+ return;
+
+ list = head->next;
+ list_del(head);
+ insize = 1;
+ for (;;) {
+ p = oldhead = list;
+ list = tail = NULL;
+ nmerges = 0;
+
+ while (p) {
+ nmerges++;
+ q = p;
+ psize = 0;
+ for (i = 0; i < insize; i++) {
+ psize++;
+ q = q->next == oldhead ? NULL : q->next;
+ if (!q)
+ break;
+ }
+
+ qsize = insize;
+ while (psize > 0 || (qsize > 0 && q)) {
+ if (!psize) {
+ e = q;
+ q = q->next;
+ qsize--;
+ if (q == oldhead)
+ q = NULL;
+ } else if (!qsize || !q) {
+ e = p;
+ p = p->next;
+ psize--;
+ if (p == oldhead)
+ p = NULL;
+ } else if (cmp(priv, p, q) <= 0) {
+ e = p;
+ p = p->next;
+ psize--;
+ if (p == oldhead)
+ p = NULL;
+ } else {
+ e = q;
+ q = q->next;
+ qsize--;
+ if (q == oldhead)
+ q = NULL;
+ }
+ if (tail)
+ tail->next = e;
+ else
+ list = e;
+ e->prev = tail;
+ tail = e;
+ }
+ p = q;
+ }
+
+ tail->next = list;
+ list->prev = tail;
+
+ if (nmerges <= 1)
+ break;
+
+ insize *= 2;
+ }
+
+ head->next = list;
+ head->prev = list->prev;
+ list->prev->next = head;
+ list->prev = head;
+}
+
+EXPORT_SYMBOL(list_sort);
* Richard Purdie <rpurdie@openedhand.com>
*/
+#ifndef STATIC
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/lzo.h>
-#include <asm/byteorder.h>
+#endif
+
#include <asm/unaligned.h>
+#include <linux/lzo.h>
#include "lzodefs.h"
#define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x))
*out_len = op - out;
return LZO_E_LOOKBEHIND_OVERRUN;
}
-
+#ifndef STATIC
EXPORT_SYMBOL_GPL(lzo1x_decompress_safe);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("LZO1X Decompressor");
+#endif
*/
#include <linux/rational.h>
+#include <linux/module.h>
/*
* calculate best rational approximation for a given fraction
*/
char *strstr(const char *s1, const char *s2)
{
- int l1, l2;
+ size_t l1, l2;
l2 = strlen(s2);
if (!l2)
EXPORT_SYMBOL(strstr);
#endif
+#ifndef __HAVE_ARCH_STRNSTR
+/**
+ * strnstr - Find the first substring in a length-limited string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ * @len: the maximum number of characters to search
+ */
+char *strnstr(const char *s1, const char *s2, size_t len)
+{
+ size_t l1 = len, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(strnstr);
+#endif
+
#ifndef __HAVE_ARCH_MEMCHR
/**
* memchr - Find a character in an area of memory.
* IPv6 omits the colons (01020304...0f)
* IPv4 uses dot-separated decimal with leading 0's (010.123.045.006)
* - 'I6c' for IPv6 addresses printed as specified by
- * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt
+ * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00
* - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form
* "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
* Options for %pU are:
* %pI6 print an IPv6 address with colons
* %pi6 print an IPv6 address without colons
* %pI6c print an IPv6 address as specified by
- * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt
+ * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00
* %pU[bBlL] print a UUID/GUID in big or little endian using lower or upper
* case.
* %n is ignored
#include "inflate.h"
#include "inffast.h"
+/* Only do the unaligned "Faster" variant when
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set
+ *
+ * On powerpc, it won't be as we don't include autoconf.h
+ * automatically for the boot wrapper, which is intended as
+ * we run in an environment where we may not be able to deal
+ * with (even rare) alignment faults. In addition, we do not
+ * define __KERNEL__ for arch/powerpc/boot unlike x86
+ */
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#endif
+
#ifndef ASMINF
/* Allow machine dependent optimization for post-increment or pre-increment.
#ifdef POSTINC
# define OFF 0
# define PUP(a) *(a)++
+# define UP_UNALIGNED(a) get_unaligned((a)++)
#else
# define OFF 1
# define PUP(a) *++(a)
+# define UP_UNALIGNED(a) get_unaligned(++(a))
#endif
/*
}
}
else {
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ unsigned short *sout;
+ unsigned long loops;
+
+ from = out - dist; /* copy direct from output */
+ /* minimum length is three */
+ /* Align out addr */
+ if (!((long)(out - 1 + OFF) & 1)) {
+ PUP(out) = PUP(from);
+ len--;
+ }
+ sout = (unsigned short *)(out - OFF);
+ if (dist > 2) {
+ unsigned short *sfrom;
+
+ sfrom = (unsigned short *)(from - OFF);
+ loops = len >> 1;
+ do
+ PUP(sout) = UP_UNALIGNED(sfrom);
+ while (--loops);
+ out = (unsigned char *)sout + OFF;
+ from = (unsigned char *)sfrom + OFF;
+ } else { /* dist == 1 or dist == 2 */
+ unsigned short pat16;
+
+ pat16 = *(sout-2+2*OFF);
+ if (dist == 1)
+#if defined(__BIG_ENDIAN)
+ pat16 = (pat16 & 0xff) | ((pat16 & 0xff) << 8);
+#elif defined(__LITTLE_ENDIAN)
+ pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00) >> 8);
+#else
+#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined
+#endif
+ loops = len >> 1;
+ do
+ PUP(sout) = pat16;
+ while (--loops);
+ out = (unsigned char *)sout + OFF;
+ }
+ if (len & 1)
+ PUP(out) = PUP(from);
+#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
from = out - dist; /* copy direct from output */
do { /* minimum length is three */
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- len -= 3;
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
} while (len > 2);
if (len) {
- PUP(out) = PUP(from);
- if (len > 1)
- PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
}
+#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
}
}
else if ((op & 64) == 0) { /* 2nd level distance code */
static struct page *__read_cache_page(struct address_space *mapping,
pgoff_t index,
int (*filler)(void *,struct page*),
- void *data)
+ void *data,
+ gfp_t gfp)
{
struct page *page;
int err;
repeat:
page = find_get_page(mapping, index);
if (!page) {
- page = page_cache_alloc_cold(mapping);
+ page = __page_cache_alloc(gfp | __GFP_COLD);
if (!page)
return ERR_PTR(-ENOMEM);
err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL);
return page;
}
-/**
- * read_cache_page_async - read into page cache, fill it if needed
- * @mapping: the page's address_space
- * @index: the page index
- * @filler: function to perform the read
- * @data: destination for read data
- *
- * Same as read_cache_page, but don't wait for page to become unlocked
- * after submitting it to the filler.
- *
- * Read into the page cache. If a page already exists, and PageUptodate() is
- * not set, try to fill the page but don't wait for it to become unlocked.
- *
- * If the page does not get brought uptodate, return -EIO.
- */
-struct page *read_cache_page_async(struct address_space *mapping,
+static struct page *do_read_cache_page(struct address_space *mapping,
pgoff_t index,
int (*filler)(void *,struct page*),
- void *data)
+ void *data,
+ gfp_t gfp)
+
{
struct page *page;
int err;
retry:
- page = __read_cache_page(mapping, index, filler, data);
+ page = __read_cache_page(mapping, index, filler, data, gfp);
if (IS_ERR(page))
return page;
if (PageUptodate(page))
mark_page_accessed(page);
return page;
}
+
+/**
+ * read_cache_page_async - read into page cache, fill it if needed
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @filler: function to perform the read
+ * @data: destination for read data
+ *
+ * Same as read_cache_page, but don't wait for page to become unlocked
+ * after submitting it to the filler.
+ *
+ * Read into the page cache. If a page already exists, and PageUptodate() is
+ * not set, try to fill the page but don't wait for it to become unlocked.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page_async(struct address_space *mapping,
+ pgoff_t index,
+ int (*filler)(void *,struct page*),
+ void *data)
+{
+ return do_read_cache_page(mapping, index, filler, data, mapping_gfp_mask(mapping));
+}
EXPORT_SYMBOL(read_cache_page_async);
+static struct page *wait_on_page_read(struct page *page)
+{
+ if (!IS_ERR(page)) {
+ wait_on_page_locked(page);
+ if (!PageUptodate(page)) {
+ page_cache_release(page);
+ page = ERR_PTR(-EIO);
+ }
+ }
+ return page;
+}
+
+/**
+ * read_cache_page_gfp - read into page cache, using specified page allocation flags.
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @gfp: the page allocator flags to use if allocating
+ *
+ * This is the same as "read_mapping_page(mapping, index, NULL)", but with
+ * any new page allocations done using the specified allocation flags. Note
+ * that the Radix tree operations will still use GFP_KERNEL, so you can't
+ * expect to do this atomically or anything like that - but you can pass in
+ * other page requirements.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page_gfp(struct address_space *mapping,
+ pgoff_t index,
+ gfp_t gfp)
+{
+ filler_t *filler = (filler_t *)mapping->a_ops->readpage;
+
+ return wait_on_page_read(do_read_cache_page(mapping, index, filler, NULL, gfp));
+}
+EXPORT_SYMBOL(read_cache_page_gfp);
+
/**
* read_cache_page - read into page cache, fill it if needed
* @mapping: the page's address_space
int (*filler)(void *,struct page*),
void *data)
{
- struct page *page;
-
- page = read_cache_page_async(mapping, index, filler, data);
- if (IS_ERR(page))
- goto out;
- wait_on_page_locked(page);
- if (!PageUptodate(page)) {
- page_cache_release(page);
- page = ERR_PTR(-EIO);
- }
- out:
- return page;
+ return wait_on_page_read(read_cache_page_async(mapping, index, filler, data));
}
EXPORT_SYMBOL(read_cache_page);
{
int i;
- if (unlikely(sz > MAX_ORDER_NR_PAGES)) {
+ if (unlikely(sz/PAGE_SIZE > MAX_ORDER_NR_PAGES)) {
clear_gigantic_page(page, addr, sz);
return;
}
* Safely read from address @src to the buffer at @dst. If a kernel fault
* happens, handle that and return -EFAULT.
*/
-long probe_kernel_read(void *dst, void *src, size_t size)
+
+long __weak probe_kernel_read(void *dst, void *src, size_t size)
+ __attribute__((alias("__probe_kernel_read")));
+
+long __probe_kernel_read(void *dst, void *src, size_t size)
{
long ret;
mm_segment_t old_fs = get_fs();
* Safely write to address @dst from the buffer at @src. If a kernel fault
* happens, handle that and return -EFAULT.
*/
-long notrace __weak probe_kernel_write(void *dst, void *src, size_t size)
+long __weak probe_kernel_write(void *dst, void *src, size_t size)
+ __attribute__((alias("__probe_kernel_write")));
+
+long __probe_kernel_write(void *dst, void *src, size_t size)
{
long ret;
mm_segment_t old_fs = get_fs();
if (free_all)
goto try_to_free;
move_account:
- while (mem->res.usage > 0) {
+ do {
ret = -EBUSY;
if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children))
goto out;
if (ret == -ENOMEM)
goto try_to_free;
cond_resched();
- }
- ret = 0;
+ /* "ret" should also be checked to ensure all lists are empty. */
+ } while (mem->res.usage > 0 || ret);
out:
css_put(&mem->css);
return ret;
}
lru_add_drain();
/* try move_account...there may be some *locked* pages. */
- if (mem->res.usage)
- goto move_account;
- ret = 0;
- goto out;
+ goto move_account;
}
int mem_cgroup_force_empty_write(struct cgroup *cont, unsigned int event)
}
EXPORT_SYMBOL(do_mmap_pgoff);
+SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags,
+ unsigned long, fd, unsigned long, pgoff)
+{
+ struct file *file = NULL;
+ unsigned long retval = -EBADF;
+
+ if (!(flags & MAP_ANONYMOUS)) {
+ if (unlikely(flags & MAP_HUGETLB))
+ return -EINVAL;
+ file = fget(fd);
+ if (!file)
+ goto out;
+ } else if (flags & MAP_HUGETLB) {
+ struct user_struct *user = NULL;
+ /*
+ * VM_NORESERVE is used because the reservations will be
+ * taken when vm_ops->mmap() is called
+ * A dummy user value is used because we are not locking
+ * memory so no accounting is necessary
+ */
+ len = ALIGN(len, huge_page_size(&default_hstate));
+ file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE,
+ &user, HUGETLB_ANONHUGE_INODE);
+ if (IS_ERR(file))
+ return PTR_ERR(file);
+ }
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+ down_write(¤t->mm->mmap_sem);
+ retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return retval;
+}
+
/*
* Some shared mappigns will want the pages marked read-only
* to track write events. If so, we'll downgrade vm_page_prot
/*
* Ok, looks good - let it rip.
*/
+ flush_icache_range(mm->brk, brk);
return mm->brk = brk;
}
static void __put_nommu_region(struct vm_region *region)
__releases(nommu_region_sem)
{
- kenter("%p{%d}", region, atomic_read(®ion->vm_usage));
+ kenter("%p{%d}", region, region->vm_usage);
BUG_ON(!nommu_region_tree.rb_node);
- if (atomic_dec_and_test(®ion->vm_usage)) {
+ if (--region->vm_usage == 0) {
if (region->vm_top > region->vm_start)
delete_nommu_region(region);
up_write(&nommu_region_sem);
if (!vma)
goto error_getting_vma;
- atomic_set(®ion->vm_usage, 1);
+ region->vm_usage = 1;
region->vm_flags = vm_flags;
region->vm_pgoff = pgoff;
}
/* we've found a region we can share */
- atomic_inc(&pregion->vm_usage);
+ pregion->vm_usage++;
vma->vm_region = pregion;
start = pregion->vm_start;
start += (pgoff - pregion->vm_pgoff) << PAGE_SHIFT;
vma->vm_region = NULL;
vma->vm_start = 0;
vma->vm_end = 0;
- atomic_dec(&pregion->vm_usage);
+ pregion->vm_usage--;
pregion = NULL;
goto error_just_free;
}
share:
add_vma_to_mm(current->mm, vma);
- up_write(&nommu_region_sem);
+ /* we flush the region from the icache only when the first executable
+ * mapping of it is made */
+ if (vma->vm_flags & VM_EXEC && !region->vm_icache_flushed) {
+ flush_icache_range(region->vm_start, region->vm_end);
+ region->vm_icache_flushed = true;
+ }
- if (prot & PROT_EXEC)
- flush_icache_range(result, result + len);
+ up_write(&nommu_region_sem);
kleave(" = %lx", result);
return result;
}
EXPORT_SYMBOL(do_mmap_pgoff);
+SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags,
+ unsigned long, fd, unsigned long, pgoff)
+{
+ struct file *file = NULL;
+ unsigned long retval = -EBADF;
+
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+ down_write(¤t->mm->mmap_sem);
+ retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return retval;
+}
+
/*
* split a vma into two pieces at address 'addr', a new vma is allocated either
* for the first part or the tail.
kenter("");
- /* we're only permitted to split anonymous regions that have a single
- * owner */
- if (vma->vm_file ||
- atomic_read(&vma->vm_region->vm_usage) != 1)
+ /* we're only permitted to split anonymous regions (these should have
+ * only a single usage on the region) */
+ if (vma->vm_file)
return -ENOMEM;
if (mm->map_count >= sysctl_max_map_count)
/* cut the backing region down to size */
region = vma->vm_region;
- BUG_ON(atomic_read(®ion->vm_usage) != 1);
+ BUG_ON(region->vm_usage != 1);
down_write(&nommu_region_sem);
delete_nommu_region(region);
}
EXPORT_SYMBOL(unmap_mapping_range);
-/*
- * ask for an unmapped area at which to create a mapping on a file
- */
-unsigned long get_unmapped_area(struct file *file, unsigned long addr,
- unsigned long len, unsigned long pgoff,
- unsigned long flags)
-{
- unsigned long (*get_area)(struct file *, unsigned long, unsigned long,
- unsigned long, unsigned long);
-
- get_area = current->mm->get_unmapped_area;
- if (file && file->f_op && file->f_op->get_unmapped_area)
- get_area = file->f_op->get_unmapped_area;
-
- if (!get_area)
- return -ENOSYS;
-
- return get_area(file, addr, len, pgoff, flags);
-}
-EXPORT_SYMBOL(get_unmapped_area);
-
/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
/* only read or write mappings where it is permitted */
if (write && vma->vm_flags & VM_MAYWRITE)
- len -= copy_to_user((void *) addr, buf, len);
+ copy_to_user_page(vma, NULL, addr,
+ (void *) addr, buf, len);
else if (!write && vma->vm_flags & VM_MAYREAD)
- len -= copy_from_user(buf, (void *) addr, len);
+ copy_from_user_page(vma, NULL, addr,
+ buf, (void *) addr, len);
else
len = 0;
} else {
mmput(mm);
return len;
}
+
+/**
+ * nommu_shrink_inode_mappings - Shrink the shared mappings on an inode
+ * @inode: The inode to check
+ * @size: The current filesize of the inode
+ * @newsize: The proposed filesize of the inode
+ *
+ * Check the shared mappings on an inode on behalf of a shrinking truncate to
+ * make sure that that any outstanding VMAs aren't broken and then shrink the
+ * vm_regions that extend that beyond so that do_mmap_pgoff() doesn't
+ * automatically grant mappings that are too large.
+ */
+int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
+ size_t newsize)
+{
+ struct vm_area_struct *vma;
+ struct prio_tree_iter iter;
+ struct vm_region *region;
+ pgoff_t low, high;
+ size_t r_size, r_top;
+
+ low = newsize >> PAGE_SHIFT;
+ high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ down_write(&nommu_region_sem);
+
+ /* search for VMAs that fall within the dead zone */
+ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+ low, high) {
+ /* found one - only interested if it's shared out of the page
+ * cache */
+ if (vma->vm_flags & VM_SHARED) {
+ up_write(&nommu_region_sem);
+ return -ETXTBSY; /* not quite true, but near enough */
+ }
+ }
+
+ /* reduce any regions that overlap the dead zone - if in existence,
+ * these will be pointed to by VMAs that don't overlap the dead zone
+ *
+ * we don't check for any regions that start beyond the EOF as there
+ * shouldn't be any
+ */
+ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+ 0, ULONG_MAX) {
+ if (!(vma->vm_flags & VM_SHARED))
+ continue;
+
+ region = vma->vm_region;
+ r_size = region->vm_top - region->vm_start;
+ r_top = (region->vm_pgoff << PAGE_SHIFT) + r_size;
+
+ if (r_top > newsize) {
+ region->vm_top -= r_top - newsize;
+ if (region->vm_end > region->vm_top)
+ region->vm_end = region->vm_top;
+ }
+ }
+
+ up_write(&nommu_region_sem);
+ return 0;
+}
page = list_entry(list->prev, struct page, lru);
/* must delete as __free_one_page list manipulates */
list_del(&page->lru);
- __free_one_page(page, zone, 0, migratetype);
- trace_mm_page_pcpu_drain(page, 0, migratetype);
+ /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
+ __free_one_page(page, zone, 0, page_private(page));
+ trace_mm_page_pcpu_drain(page, 0, page_private(page));
} while (--count && --batch_free && !list_empty(list));
}
spin_unlock(&zone->lock);
}
spin_lock_irqsave(&zone->lock, flags);
page = __rmqueue(zone, order, migratetype);
- __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
spin_unlock(&zone->lock);
if (!page)
goto failed;
+ __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
}
__count_zone_vm_events(PGALLOC, zone, 1 << order);
}
/* Merge backward if suitable */
- if (start_pfn < early_node_map[i].end_pfn &&
+ if (start_pfn < early_node_map[i].start_pfn &&
end_pfn >= early_node_map[i].start_pfn) {
early_node_map[i].start_pfn = start_pfn;
return;
*/
void free_percpu(void *ptr)
{
- void *addr = __pcpu_ptr_to_addr(ptr);
+ void *addr;
struct pcpu_chunk *chunk;
unsigned long flags;
int off;
if (!ptr)
return;
+ addr = __pcpu_ptr_to_addr(ptr);
+
spin_lock_irqsave(&pcpu_lock, flags);
chunk = pcpu_chunk_addr_search(addr);
l3 = s->cs_cachep->nodelists[q];
if (!l3 || OFF_SLAB(s->cs_cachep))
- return;
+ continue;
lockdep_set_class(&l3->list_lock, &on_slab_l3_key);
alc = l3->alien;
/*
* for alloc_alien_cache,
*/
if (!alc || (unsigned long)alc == BAD_ALIEN_MAGIC)
- return;
+ continue;
for_each_node(r) {
if (alc[r])
lockdep_set_class(&alc[r]->lock,
*/
void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
{
- if (new < old) {
- struct address_space *mapping = inode->i_mapping;
-
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, new);
- unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
- }
+ struct address_space *mapping = inode->i_mapping;
+
+ /*
+ * unmap_mapping_range is called twice, first simply for
+ * efficiency so that truncate_inode_pages does fewer
+ * single-page unmaps. However after this first call, and
+ * before truncate_inode_pages finishes, it is possible for
+ * private pages to be COWed, which remain after
+ * truncate_inode_pages finishes, hence the second
+ * unmap_mapping_range call must be made for correctness.
+ */
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(mapping, new);
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
}
EXPORT_SYMBOL(truncate_pagecache);
#include <linux/module.h>
#include <linux/err.h>
#include <linux/sched.h>
-#include <linux/hugetlb.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
#include <asm/uaccess.h>
#define CREATE_TRACE_POINTS
}
EXPORT_SYMBOL(strndup_user);
-#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT
+#if defined(CONFIG_MMU) && !defined(HAVE_ARCH_PICK_MMAP_LAYOUT)
void arch_pick_mmap_layout(struct mm_struct *mm)
{
mm->mmap_base = TASK_UNMAPPED_BASE;
}
EXPORT_SYMBOL_GPL(get_user_pages_fast);
-SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
- unsigned long, prot, unsigned long, flags,
- unsigned long, fd, unsigned long, pgoff)
-{
- struct file * file = NULL;
- unsigned long retval = -EBADF;
-
- if (!(flags & MAP_ANONYMOUS)) {
- if (unlikely(flags & MAP_HUGETLB))
- return -EINVAL;
- file = fget(fd);
- if (!file)
- goto out;
- } else if (flags & MAP_HUGETLB) {
- struct user_struct *user = NULL;
- /*
- * VM_NORESERVE is used because the reservations will be
- * taken when vm_ops->mmap() is called
- * A dummy user value is used because we are not locking
- * memory so no accounting is necessary
- */
- len = ALIGN(len, huge_page_size(&default_hstate));
- file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE,
- &user, HUGETLB_ANONHUGE_INODE);
- if (IS_ERR(file))
- return PTR_ERR(file);
- }
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
- down_write(¤t->mm->mmap_sem);
- retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
- up_write(¤t->mm->mmap_sem);
-
- if (file)
- fput(file);
-out:
- return retval;
-}
-
/* Tracepoints definitions. */
EXPORT_TRACEPOINT_SYMBOL(kmalloc);
EXPORT_TRACEPOINT_SYMBOL(kmem_cache_alloc);
}
rcu_read_unlock();
- if (nr) {
- BUG_ON(nr > atomic_read(&vmap_lazy_nr));
+ if (nr)
atomic_sub(nr, &vmap_lazy_nr);
- }
if (nr || force_flush)
flush_tlb_kernel_range(*start, *end);
if (!populated_zone(zone))
continue;
+ if (zone_is_all_unreclaimable(zone))
+ continue;
+
if (!zone_watermark_ok(zone, order, high_wmark_pages(zone),
0, 0))
return 1;
goto err_unlock;
}
- rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats,
+ rx_stats = per_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats,
smp_processor_id());
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
ma = &ifa->address;
else { /* We need to make a copy of the entry. */
da.s_node = sa.s_node;
- da.s_net = da.s_net;
+ da.s_net = sa.s_net;
ma = &da;
}
#endif
}
+ /*
+ * There is one ref for the state machine; a caller needs
+ * one more to put it back, just like with the existing one.
+ */
+ ax25_cb_hold(ax25);
+
ax25_cb_add(ax25);
ax25->state = AX25_STATE_1;
{
int ret;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
switch(cmd) {
case EBT_SO_SET_ENTRIES:
ret = do_replace(sock_net(sk), user, len);
struct ebt_replace tmp;
struct ebt_table *t;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
if (copy_from_user(&tmp, user, sizeof(tmp)))
return -EFAULT;
__u64 count; /* Default No packets to send */
__u64 sofar; /* How many pkts we've sent so far */
__u64 tx_bytes; /* How many bytes we've transmitted */
- __u64 errors; /* Errors when trying to transmit,
- pkts will be re-sent */
+ __u64 errors; /* Errors when trying to transmit, */
/* runtime counters relating to clone_skb */
pkt_dev->seq_num++;
pkt_dev->tx_bytes += pkt_dev->last_pkt_size;
break;
+ case NET_XMIT_DROP:
+ case NET_XMIT_CN:
+ case NET_XMIT_POLICED:
+ /* skb has been consumed */
+ pkt_dev->errors++;
+ break;
default: /* Drivers are not supposed to return other values! */
if (net_ratelimit())
pr_info("pktgen: %s xmit error: %d\n",
if (newsk->sk_prot->sockets_allocated)
percpu_counter_inc(newsk->sk_prot->sockets_allocated);
+
+ if (sock_flag(newsk, SOCK_TIMESTAMP) ||
+ sock_flag(newsk, SOCK_TIMESTAMPING_RX_SOFTWARE))
+ net_enable_timestamp();
}
out:
return newsk;
return err;
}
-static struct kmem_cache *ccid_kmem_cache_create(int obj_size, const char *fmt,...)
+static struct kmem_cache *ccid_kmem_cache_create(int obj_size, char *slab_name_fmt, const char *fmt,...)
{
struct kmem_cache *slab;
- char slab_name_fmt[32], *slab_name;
va_list args;
va_start(args, fmt);
vsnprintf(slab_name_fmt, sizeof(slab_name_fmt), fmt, args);
va_end(args);
- slab_name = kstrdup(slab_name_fmt, GFP_KERNEL);
- if (slab_name == NULL)
- return NULL;
- slab = kmem_cache_create(slab_name, sizeof(struct ccid) + obj_size, 0,
+ slab = kmem_cache_create(slab_name_fmt, sizeof(struct ccid) + obj_size, 0,
SLAB_HWCACHE_ALIGN, NULL);
- if (slab == NULL)
- kfree(slab_name);
return slab;
}
static void ccid_kmem_cache_destroy(struct kmem_cache *slab)
{
- if (slab != NULL) {
- const char *name = kmem_cache_name(slab);
-
+ if (slab != NULL)
kmem_cache_destroy(slab);
- kfree(name);
- }
}
static int ccid_activate(struct ccid_operations *ccid_ops)
ccid_ops->ccid_hc_rx_slab =
ccid_kmem_cache_create(ccid_ops->ccid_hc_rx_obj_size,
+ ccid_ops->ccid_hc_rx_slab_name,
"ccid%u_hc_rx_sock",
ccid_ops->ccid_id);
if (ccid_ops->ccid_hc_rx_slab == NULL)
ccid_ops->ccid_hc_tx_slab =
ccid_kmem_cache_create(ccid_ops->ccid_hc_tx_obj_size,
+ ccid_ops->ccid_hc_tx_slab_name,
"ccid%u_hc_tx_sock",
ccid_ops->ccid_id);
if (ccid_ops->ccid_hc_tx_slab == NULL)
const char *ccid_name;
struct kmem_cache *ccid_hc_rx_slab,
*ccid_hc_tx_slab;
+ char ccid_hc_rx_slab_name[32];
+ char ccid_hc_tx_slab_name[32];
__u32 ccid_hc_rx_obj_size,
ccid_hc_tx_obj_size;
/* Interface Routines */
if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops))
goto err0;
- ret = register_jprobe(&dccp_send_probe);
+ ret = try_then_request_module((register_jprobe(&dccp_send_probe) == 0),
+ "dccp");
if (ret)
goto err1;
DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE,
"accept_source_route"),
DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"),
+ DEVINET_SYSCTL_RW_ENTRY(SRC_VMARK, "src_valid_mark"),
DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"),
DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"),
DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"),
no_addr = in_dev->ifa_list == NULL;
rpf = IN_DEV_RPFILTER(in_dev);
accept_local = IN_DEV_ACCEPT_LOCAL(in_dev);
+ if (mark && !IN_DEV_SRC_VMARK(in_dev))
+ fl.mark = 0;
}
rcu_read_unlock();
yes = entry->sport >= op[1].no;
break;
case INET_DIAG_BC_S_LE:
- yes = entry->dport <= op[1].no;
+ yes = entry->sport <= op[1].no;
break;
case INET_DIAG_BC_D_GE:
yes = entry->dport >= op[1].no;
*/
if (rt->rt_flags&RTCF_MULTICAST) {
- if ((!sk || inet_sk(sk)->mc_loop)
+ if (sk_mc_loop(sk)
#ifdef CONFIG_IP_MROUTE
/* Small optimization: do not loopback not local frames,
which returned after forwarding; they will be dropped
{
remove_proc_entry("rt_cache", net->proc_net_stat);
remove_proc_entry("rt_cache", net->proc_net);
+#ifdef CONFIG_NET_CLS_ROUTE
remove_proc_entry("rt_acct", net->proc_net);
+#endif
}
static struct pernet_operations ip_rt_proc_ops __net_initdata = {
MODULE_PARM_DESC(port, "Port to match (0=all)");
module_param(port, int, 0);
-static int bufsize __read_mostly = 4096;
+static unsigned int bufsize __read_mostly = 4096;
MODULE_PARM_DESC(bufsize, "Log buffer size in packets (4096)");
-module_param(bufsize, int, 0);
+module_param(bufsize, uint, 0);
static int full __read_mostly;
MODULE_PARM_DESC(full, "Full log (1=every ack packet received, 0=only cwnd changes)");
static inline int tcp_probe_used(void)
{
- return (tcp_probe.head - tcp_probe.tail) % bufsize;
+ return (tcp_probe.head - tcp_probe.tail) & (bufsize - 1);
}
static inline int tcp_probe_avail(void)
{
- return bufsize - tcp_probe_used();
+ return bufsize - tcp_probe_used() - 1;
}
/*
p->ssthresh = tcp_current_ssthresh(sk);
p->srtt = tp->srtt >> 3;
- tcp_probe.head = (tcp_probe.head + 1) % bufsize;
+ tcp_probe.head = (tcp_probe.head + 1) & (bufsize - 1);
}
tcp_probe.lastcwnd = tp->snd_cwnd;
spin_unlock(&tcp_probe.lock);
static int tcpprobe_sprint(char *tbuf, int n)
{
const struct tcp_log *p
- = tcp_probe.log + tcp_probe.tail % bufsize;
+ = tcp_probe.log + tcp_probe.tail;
struct timespec tv
= ktime_to_timespec(ktime_sub(p->tstamp, tcp_probe.start));
width = tcpprobe_sprint(tbuf, sizeof(tbuf));
if (cnt + width < len)
- tcp_probe.tail = (tcp_probe.tail + 1) % bufsize;
+ tcp_probe.tail = (tcp_probe.tail + 1) & (bufsize - 1);
spin_unlock_bh(&tcp_probe.lock);
init_waitqueue_head(&tcp_probe.wait);
spin_lock_init(&tcp_probe.lock);
- if (bufsize < 0)
+ if (bufsize == 0)
return -EINVAL;
+ bufsize = roundup_pow_of_two(bufsize);
tcp_probe.log = kcalloc(bufsize, sizeof(struct tcp_log), GFP_KERNEL);
if (!tcp_probe.log)
goto err0;
if (ret)
goto err1;
- pr_info("TCP probe registered (port=%d)\n", port);
+ pr_info("TCP probe registered (port=%d) bufsize=%u\n", port, bufsize);
return 0;
err1:
proc_net_remove(&init_net, procname);
#include <net/xfrm.h>
#include <net/ip.h>
-static struct dst_ops xfrm4_dst_ops;
static struct xfrm_policy_afinfo xfrm4_policy_afinfo;
static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
static inline int xfrm4_garbage_collect(struct dst_ops *ops)
{
- xfrm4_policy_afinfo.garbage_collect(&init_net);
- return (atomic_read(&xfrm4_dst_ops.entries) > xfrm4_dst_ops.gc_thresh*2);
+ struct net *net = container_of(ops, struct net, xfrm.xfrm4_dst_ops);
+
+ xfrm4_policy_afinfo.garbage_collect(net);
+ return (atomic_read(&ops->entries) > ops->gc_thresh * 2);
}
static void xfrm4_update_pmtu(struct dst_entry *dst, u32 mtu)
static struct ctl_table xfrm4_policy_table[] = {
{
.procname = "xfrm4_gc_thresh",
- .data = &xfrm4_dst_ops.gc_thresh,
+ .data = &init_net.xfrm.xfrm4_dst_ops.gc_thresh,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
void __init xfrm4_init(int rt_max_size)
{
- xfrm4_state_init();
- xfrm4_policy_init();
/*
* Select a default value for the gc_thresh based on the main route
* table hash size. It seems to me the worst case scenario is when
* and start cleaning when were 1/2 full
*/
xfrm4_dst_ops.gc_thresh = rt_max_size/2;
+
+ xfrm4_state_init();
+ xfrm4_policy_init();
#ifdef CONFIG_SYSCTL
sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv4_ctl_path,
xfrm4_policy_table);
return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev);
}
+static inline struct net *ipv6_skb_net(struct sk_buff *skb)
+{
+ return skb_dst(skb) ? dev_net(skb_dst(skb)->dev) : dev_net(skb->dev);
+}
+
/* Router Alert as of RFC 2711 */
static int ipv6_hop_ra(struct sk_buff *skb, int optoff)
static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff)
{
const unsigned char *nh = skb_network_header(skb);
+ struct net *net = ipv6_skb_net(skb);
u32 pkt_len;
- struct net *net = dev_net(skb_dst(skb)->dev);
if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
skb->dev = dev;
if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
- struct ipv6_pinfo* np = skb->sk ? inet6_sk(skb->sk) : NULL;
struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
- if (!(dev->flags & IFF_LOOPBACK) && (!np || np->mc_loop) &&
+ if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(skb->sk) &&
((mroute6_socket(dev_net(dev)) &&
!(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
#include <net/mip6.h>
#endif
-static struct dst_ops xfrm6_dst_ops;
static struct xfrm_policy_afinfo xfrm6_policy_afinfo;
static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos,
static inline int xfrm6_garbage_collect(struct dst_ops *ops)
{
- xfrm6_policy_afinfo.garbage_collect(&init_net);
- return (atomic_read(&xfrm6_dst_ops.entries) > xfrm6_dst_ops.gc_thresh*2);
+ struct net *net = container_of(ops, struct net, xfrm.xfrm6_dst_ops);
+
+ xfrm6_policy_afinfo.garbage_collect(net);
+ return (atomic_read(&ops->entries) > ops->gc_thresh * 2);
}
static void xfrm6_update_pmtu(struct dst_entry *dst, u32 mtu)
static struct ctl_table xfrm6_policy_table[] = {
{
.procname = "xfrm6_gc_thresh",
- .data = &xfrm6_dst_ops.gc_thresh,
+ .data = &init_net.xfrm.xfrm6_dst_ops.gc_thresh,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
int ret;
unsigned int gc_thresh;
- ret = xfrm6_policy_init();
- if (ret)
- goto out;
-
- ret = xfrm6_state_init();
- if (ret)
- goto out_policy;
/*
* We need a good default value for the xfrm6 gc threshold.
* In ipv4 we set it to the route hash table size * 8, which
*/
gc_thresh = FIB6_TABLE_HASHSZ * 8;
xfrm6_dst_ops.gc_thresh = (gc_thresh < 1024) ? 1024 : gc_thresh;
+
+ ret = xfrm6_policy_init();
+ if (ret)
+ goto out;
+
+ ret = xfrm6_state_init();
+ if (ret)
+ goto out_policy;
+
#ifdef CONFIG_SYSCTL
sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv6_ctl_path,
xfrm6_policy_table);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_conf *conf = &local->hw.conf;
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
return -EOPNOTSUPP;
ht_cap->ht_supported = true;
- ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap;
- ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS;
- ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS;
+ /*
+ * The bits listed in this expression should be
+ * the same for the peer and us, if the station
+ * advertises more then we can't use those thus
+ * we mask them out.
+ */
+ ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) &
+ (sband->ht_cap.cap |
+ ~(IEEE80211_HT_CAP_LDPC_CODING |
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_GRN_FLD |
+ IEEE80211_HT_CAP_SGI_20 |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_DSSSCCK40));
+ /*
+ * The STBC bits are asymmetric -- if we don't have
+ * TX then mask out the peer's RX and vice versa.
+ */
+ if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC))
+ ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC;
+ if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC))
+ ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC;
ampdu_info = ht_cap_ie->ampdu_params_info;
ht_cap->ampdu_factor =
struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
u8 *bssid,u8 *addr, u32 supp_rates)
{
+ struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int band = local->hw.conf.channel->band;
return NULL;
}
+ if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH)
+ return NULL;
+
if (compare_ether_addr(bssid, sdata->u.ibss.bssid))
return NULL;
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
#include "led.h"
#include "driver-ops.h"
+#include "wme.h"
/**
* DOC: Interface list locking
if (sdata->vif.type == NL80211_IFTYPE_STATION)
ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
- netif_start_queue(dev);
+ netif_tx_start_all_queues(dev);
return 0;
err_del_interface:
/*
* Stop TX on this interface first.
*/
- netif_stop_queue(dev);
+ netif_tx_stop_all_queues(dev);
/*
* Now delete all active aggregation sessions.
WARN_ON(flushed);
}
+static u16 ieee80211_netdev_select_queue(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+}
+
static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
.ndo_set_multicast_list = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_select_queue = ieee80211_netdev_select_queue,
};
+static u16 ieee80211_monitor_select_queue(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_radiotap_header *rtap = (void *)skb->data;
+ u8 *p;
+
+ if (local->hw.queues < 4)
+ return 0;
+
+ if (skb->len < 4 ||
+ skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
+ return 0; /* doesn't matter, frame will be dropped */
+
+ hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
+
+ if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ skb->priority = 7;
+ return ieee802_1d_to_ac[skb->priority];
+ }
+
+ p = ieee80211_get_qos_ctl(hdr);
+ skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+
+ return ieee80211_downgrade_queue(local, skb);
+}
+
static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
.ndo_set_multicast_list = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_select_queue = ieee80211_monitor_select_queue,
};
static void ieee80211_if_setup(struct net_device *dev)
ASSERT_RTNL();
- ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
- name, ieee80211_if_setup);
+ ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size,
+ name, ieee80211_if_setup, local->hw.queues);
if (!ndev)
return -ENOMEM;
dev_net_set(ndev, wiphy_net(local->hw.wiphy));
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
+ BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM !=
+ sizeof(struct ieee80211_tx_status_rtap_hdr));
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
IEEE80211_STA_BEACON_POLL);
+ /*
+ * Always handle WMM once after association regardless
+ * of the first value the AP uses. Setting -1 here has
+ * that effect because the AP values is an unsigned
+ * 4-bit value.
+ */
+ sdata->u.mgd.wmm_last_param_set = -1;
+
ieee80211_led_assoc(local, 1);
sdata->vif.bss_conf.assoc = 1;
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
- netif_start_queue(sdata->dev);
+ netif_tx_start_all_queues(sdata->dev);
netif_carrier_on(sdata->dev);
}
* time -- we don't want the scan code to enable queues.
*/
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev);
rcu_read_lock();
rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
- /* XXX: differentiate, can only happen for CSA now! */
+ if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
+ break;
+
ieee80211_sta_process_chanswitch(sdata,
&mgmt->u.action.u.chan_switch.sw_elem,
ifmgd->associated);
rate_control_pid_normalize(pinfo, sband->n_bitrates);
/* Compute the proportional, integral and derivative errors. */
- err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf;
+ err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT;
err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;
memset(info, 0, sizeof(*info));
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
info->control.vif = &rx->sdata->vif;
- ieee80211_select_queue(local, fwd_skb);
+ skb_set_queue_mapping(skb,
+ ieee80211_select_queue(rx->sdata, fwd_skb));
+ ieee80211_set_qos_hdr(local, skb);
if (is_multicast_ether_addr(fwd_hdr->addr1))
IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
fwded_mcast);
}
break;
default:
+ /* do not process rejected action frames */
+ if (mgmt->u.action.category & 0x80)
+ return RX_DROP_MONITOR;
+
return RX_CONTINUE;
}
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated) {
ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
} else
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
/* re-enable beaconing */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
* are handled in the scan state machine
*/
if (sdata->vif.type != NL80211_IFTYPE_STATION)
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
}
mutex_unlock(&local->iflist_mtx);
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
if (sdata->u.mgd.associated)
ieee80211_scan_ps_enable(sdata);
}
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated)
ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
}
mutex_unlock(&local->iflist_mtx);
if (!local->ps_sdata)
return false;
+ /* No point if we're going to suspend */
+ if (local->quiescing)
+ return false;
+
return true;
}
return;
}
- ieee80211_select_queue(local, skb);
+ ieee80211_set_qos_hdr(local, skb);
ieee80211_tx(sdata, skb, false);
rcu_read_unlock();
}
skb_set_network_header(skb, 0);
skb_set_transport_header(skb, 0);
+ /* send all internal mgmt frames on VO */
+ skb_set_queue_mapping(skb, 0);
+
/*
* The other path calling ieee80211_xmit is from the tasklet,
* and while we can handle concurrent transmissions locking
enum queue_stop_reason reason)
{
struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
if (WARN_ON(queue >= hw->queues))
return;
if (!skb_queue_empty(&local->pending[queue]))
tasklet_schedule(&local->tx_pending_tasklet);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
}
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
enum queue_stop_reason reason)
{
struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
if (WARN_ON(queue >= hw->queues))
return;
__set_bit(reason, &local->queue_stop_reasons[queue]);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_stop_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
}
void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
/* restart hardware */
if (local->open_count) {
+ /*
+ * Upon resume hardware can sometimes be goofy due to
+ * various platform / driver / bus issues, so restarting
+ * the device may at times not work immediately. Propagate
+ * the error.
+ */
res = drv_start(local);
+ if (res) {
+ WARN(local->suspended, "Harware became unavailable "
+ "upon resume. This is could be a software issue"
+ "prior to suspend or a harware issue\n");
+ return res;
+ }
ieee80211_led_radio(local, true);
}
}
-/* Indicate which queue to use. */
-static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
+/* Indicate which queue to use. */
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta = NULL;
+ u32 sta_flags = 0;
+ const u8 *ra = NULL;
+ bool qos = false;
- if (!ieee80211_is_data(hdr->frame_control)) {
- /* management frames go on AC_VO queue, but are sent
- * without QoS control fields */
- return 0;
+ if (local->hw.queues < 4 || skb->len < 6) {
+ skb->priority = 0; /* required for correct WPA/11i MIC */
+ return min_t(u16, local->hw.queues - 1,
+ ieee802_1d_to_ac[skb->priority]);
+ }
+
+ rcu_read_lock();
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP_VLAN:
+ rcu_read_lock();
+ sta = rcu_dereference(sdata->u.vlan.sta);
+ if (sta)
+ sta_flags = get_sta_flags(sta);
+ rcu_read_unlock();
+ if (sta)
+ break;
+ case NL80211_IFTYPE_AP:
+ ra = skb->data;
+ break;
+ case NL80211_IFTYPE_WDS:
+ ra = sdata->u.wds.remote_addr;
+ break;
+#ifdef CONFIG_MAC80211_MESH
+ case NL80211_IFTYPE_MESH_POINT:
+ /*
+ * XXX: This is clearly broken ... but already was before,
+ * because ieee80211_fill_mesh_addresses() would clear A1
+ * except for multicast addresses.
+ */
+ break;
+#endif
+ case NL80211_IFTYPE_STATION:
+ ra = sdata->u.mgd.bssid;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ ra = skb->data;
+ break;
+ default:
+ break;
}
- if (0 /* injected */) {
- /* use AC from radiotap */
+ if (!sta && ra && !is_multicast_ether_addr(ra)) {
+ sta = sta_info_get(local, ra);
+ if (sta)
+ sta_flags = get_sta_flags(sta);
}
- if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ if (sta_flags & WLAN_STA_WME)
+ qos = true;
+
+ rcu_read_unlock();
+
+ if (!qos) {
skb->priority = 0; /* required for correct WPA/11i MIC */
return ieee802_1d_to_ac[skb->priority];
}
* data frame has */
skb->priority = cfg80211_classify8021d(skb);
+ return ieee80211_downgrade_queue(local, skb);
+}
+
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+ struct sk_buff *skb)
+{
/* in case we are a client verify acm is not set for this ac */
while (unlikely(local->wmm_acm & BIT(skb->priority))) {
if (wme_downgrade_ac(skb)) {
return ieee802_1d_to_ac[skb->priority];
}
-void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb)
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 queue;
- u8 tid;
-
- queue = classify80211(local, skb);
- if (unlikely(queue >= local->hw.queues))
- queue = local->hw.queues - 1;
-
- /*
- * Now we know the 1d priority, fill in the QoS header if
- * there is one (and we haven't done this before).
- */
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+
+ /* Fill in the QoS header if there is one. */
if (ieee80211_is_data_qos(hdr->frame_control)) {
u8 *p = ieee80211_get_qos_ctl(hdr);
- u8 ack_policy = 0;
+ u8 ack_policy = 0, tid;
+
tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+
if (unlikely(local->wifi_wme_noack_test))
ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK <<
QOS_CONTROL_ACK_POLICY_SHIFT;
*p++ = ack_policy | tid;
*p = 0;
}
-
- skb_set_queue_mapping(skb, queue);
}
extern const int ieee802_1d_to_ac[8];
-void ieee80211_select_queue(struct ieee80211_local *local,
- struct sk_buff *skb);
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb);
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb);
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+ struct sk_buff *skb);
+
#endif /* _WME_H */
module, choose M here. If unsure, say N.
config IP_VS_WRR
- tristate "weighted round-robin scheduling"
+ tristate "weighted round-robin scheduling"
+ select GCD
---help---
The weighted robin-robin scheduling algorithm directs network
connections to different real servers based on server weights
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (cmd < IP_VS_BASE_CTL || cmd > IP_VS_SO_SET_MAX)
+ return -EINVAL;
+ if (len < 0 || len > MAX_ARG_LEN)
+ return -EINVAL;
if (len != set_arglen[SET_CMDID(cmd)]) {
pr_err("set_ctl: len %u != %u\n",
len, set_arglen[SET_CMDID(cmd)]);
{
unsigned char arg[128];
int ret = 0;
+ unsigned int copylen;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (cmd < IP_VS_BASE_CTL || cmd > IP_VS_SO_GET_MAX)
+ return -EINVAL;
+
if (*len < get_arglen[GET_CMDID(cmd)]) {
pr_err("get_ctl: len %u < %u\n",
*len, get_arglen[GET_CMDID(cmd)]);
return -EINVAL;
}
- if (copy_from_user(arg, user, get_arglen[GET_CMDID(cmd)]) != 0)
+ copylen = get_arglen[GET_CMDID(cmd)];
+ if (copylen > 128)
+ return -EINVAL;
+
+ if (copy_from_user(arg, user, copylen) != 0)
return -EFAULT;
if (mutex_lock_interruptible(&__ip_vs_mutex))
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/net.h>
+#include <linux/gcd.h>
#include <net/ip_vs.h>
};
-/*
- * Get the gcd of server weights
- */
-static int gcd(int a, int b)
-{
- int c;
-
- while ((c = a % b)) {
- a = b;
- b = c;
- }
- return b;
-}
-
static int ip_vs_wrr_gcd_weight(struct ip_vs_service *svc)
{
struct ip_vs_dest *dest;
struct nf_ct_ftp_master *info, int dir,
struct sk_buff *skb)
{
- unsigned int i, oldest = NUM_SEQ_TO_REMEMBER;
+ unsigned int i, oldest;
/* Look for oldest: if we find exact match, we're done. */
for (i = 0; i < info->seq_aft_nl_num[dir]; i++) {
if (info->seq_aft_nl[dir][i] == nl_seq)
return;
-
- if (oldest == info->seq_aft_nl_num[dir] ||
- before(info->seq_aft_nl[dir][i],
- info->seq_aft_nl[dir][oldest]))
- oldest = i;
}
if (info->seq_aft_nl_num[dir] < NUM_SEQ_TO_REMEMBER) {
info->seq_aft_nl[dir][info->seq_aft_nl_num[dir]++] = nl_seq;
- } else if (oldest != NUM_SEQ_TO_REMEMBER &&
- after(nl_seq, info->seq_aft_nl[dir][oldest])) {
- info->seq_aft_nl[dir][oldest] = nl_seq;
+ } else {
+ if (before(info->seq_aft_nl[dir][0], info->seq_aft_nl[dir][1]))
+ oldest = 0;
+ else
+ oldest = 1;
+
+ if (after(nl_seq, info->seq_aft_nl[dir][oldest]))
+ info->seq_aft_nl[dir][oldest] = nl_seq;
}
}
dptr = skb_push(skb, 1);
*dptr = AX25_P_NETROM;
- ax25s = ax25_send_frame(skb, 256, (ax25_address *)dev->dev_addr, &nr_neigh->callsign, nr_neigh->digipeat, nr_neigh->dev);
- if (nr_neigh->ax25 && ax25s) {
- /* We were already holding this ax25_cb */
+ ax25s = nr_neigh->ax25;
+ nr_neigh->ax25 = ax25_send_frame(skb, 256,
+ (ax25_address *)dev->dev_addr,
+ &nr_neigh->callsign,
+ nr_neigh->digipeat, nr_neigh->dev);
+ if (ax25s)
ax25_cb_put(ax25s);
- }
- nr_neigh->ax25 = ax25s;
dev_put(dev);
ret = (nr_neigh->ax25 != NULL);
status = TP_STATUS_SEND_REQUEST;
err = dev_queue_xmit(skb);
- if (unlikely(err > 0 && (err = net_xmit_errno(err)) != 0))
- goto out_xmit;
+ if (unlikely(err > 0)) {
+ err = net_xmit_errno(err);
+ if (err && __packet_get_status(po, ph) ==
+ TP_STATUS_AVAILABLE) {
+ /* skb was destructed already */
+ skb = NULL;
+ goto out_status;
+ }
+ /*
+ * skb was dropped but not destructed yet;
+ * let's treat it like congestion or err < 0
+ */
+ err = 0;
+ }
packet_increment_head(&po->tx_ring);
len_sum += tp_len;
} while (likely((ph != NULL) ||
err = len_sum;
goto out_put;
-out_xmit:
- skb->destructor = sock_wfree;
- atomic_dec(&po->tx_ring.pending);
out_status:
__packet_set_status(po, ph, status);
kfree_skb(skb);
static int rose_send_frame(struct sk_buff *skb, struct rose_neigh *neigh)
{
ax25_address *rose_call;
+ ax25_cb *ax25s;
if (ax25cmp(&rose_callsign, &null_ax25_address) == 0)
rose_call = (ax25_address *)neigh->dev->dev_addr;
else
rose_call = &rose_callsign;
+ ax25s = neigh->ax25;
neigh->ax25 = ax25_send_frame(skb, 260, rose_call, &neigh->callsign, neigh->digipeat, neigh->dev);
+ if (ax25s)
+ ax25_cb_put(ax25s);
return (neigh->ax25 != NULL);
}
static int rose_link_up(struct rose_neigh *neigh)
{
ax25_address *rose_call;
+ ax25_cb *ax25s;
if (ax25cmp(&rose_callsign, &null_ax25_address) == 0)
rose_call = (ax25_address *)neigh->dev->dev_addr;
else
rose_call = &rose_callsign;
+ ax25s = neigh->ax25;
neigh->ax25 = ax25_find_cb(rose_call, &neigh->callsign, neigh->digipeat, neigh->dev);
+ if (ax25s)
+ ax25_cb_put(ax25s);
return (neigh->ax25 != NULL);
}
lci_i = ((skb->data[0] << 8) & 0xF00) + ((skb->data[1] << 0) & 0x0FF);
frametype = skb->data[2];
dest = (rose_address *)(skb->data + 4);
- lci_o = 0xFFF - lci_i;
+ lci_o = ROSE_DEFAULT_MAXVC + 1 - lci_i;
skb_reset_transport_header(skb);
if ((s = rose_neigh_list) == rose_neigh) {
rose_neigh_list = rose_neigh->next;
+ if (rose_neigh->ax25)
+ ax25_cb_put(rose_neigh->ax25);
kfree(rose_neigh->digipeat);
kfree(rose_neigh);
return;
while (s != NULL && s->next != NULL) {
if (s->next == rose_neigh) {
s->next = rose_neigh->next;
+ if (rose_neigh->ax25)
+ ax25_cb_put(rose_neigh->ax25);
kfree(rose_neigh->digipeat);
kfree(rose_neigh);
return;
if (rose_neigh != NULL) {
rose_neigh->ax25 = NULL;
+ ax25_cb_put(ax25);
rose_del_route_by_neigh(rose_neigh);
rose_kill_by_neigh(rose_neigh);
if (copy_from_user(&sp->autoclose, optval, optlen))
return -EFAULT;
/* make sure it won't exceed MAX_SCHEDULE_TIMEOUT */
- if (sp->autoclose > (MAX_SCHEDULE_TIMEOUT / HZ) )
- sp->autoclose = (__u32)(MAX_SCHEDULE_TIMEOUT / HZ) ;
+ sp->autoclose = min_t(long, sp->autoclose, MAX_SCHEDULE_TIMEOUT / HZ);
return 0;
}
p = gss_fill_context(p, end, ctx, gss_msg->auth->mech);
if (IS_ERR(p)) {
err = PTR_ERR(p);
- gss_msg->msg.errno = (err == -EAGAIN) ? -EAGAIN : -EACCES;
+ switch (err) {
+ case -EACCES:
+ gss_msg->msg.errno = err;
+ err = mlen;
+ break;
+ case -EFAULT:
+ case -ENOMEM:
+ case -EINVAL:
+ case -ENOSYS:
+ gss_msg->msg.errno = -EAGAIN;
+ break;
+ default:
+ printk(KERN_CRIT "%s: bad return from "
+ "gss_fill_context: %zd\n", __func__, err);
+ BUG();
+ }
goto err_release_msg;
}
gss_msg->ctx = gss_get_ctx(ctx);
struct krb5_ctx *ctx;
int tmp;
- if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS)))
+ if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS))) {
+ p = ERR_PTR(-ENOMEM);
goto out_err;
+ }
p = simple_get_bytes(p, end, &ctx->initiate, sizeof(ctx->initiate));
if (IS_ERR(p))
struct gss_ctx **ctx_id)
{
if (!(*ctx_id = kzalloc(sizeof(**ctx_id), GFP_KERNEL)))
- return GSS_S_FAILURE;
+ return -ENOMEM;
(*ctx_id)->mech_type = gss_mech_get(mech);
return mech->gm_ops
spin_unlock_bh(&pool->sp_lock);
len = 0;
- if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) {
+ if (test_bit(XPT_LISTENER, &xprt->xpt_flags) &&
+ !test_bit(XPT_CLOSE, &xprt->xpt_flags)) {
struct svc_xprt *newxpt;
newxpt = xprt->xpt_ops->xpo_accept(xprt);
if (newxpt) {
mutex_unlock(&rdev->devlist_mtx);
dev_put(dev);
}
-#ifdef CONFIG_CFG80211_WEXT
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+#ifdef CONFIG_CFG80211_WEXT
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
break;
}
wdev_unlock(wdev);
+#endif
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
-#endif
break;
case NETDEV_UNREGISTER:
/*
}
}
- WARN_ON(!bss);
+ /*
+ * We might be coming here because the driver reported
+ * a successful association at the same time as the
+ * user requested a deauth. In that case, we will have
+ * removed the BSS from the auth_bsses list due to the
+ * deauth request when the assoc response makes it. If
+ * the two code paths acquire the lock the other way
+ * around, that's just the standard situation of a
+ * deauth being requested while connected.
+ */
+ if (!bss)
+ goto out;
} else if (wdev->conn) {
cfg80211_sme_failed_assoc(wdev);
/*
request->wiphy_idx = WIPHY_IDX_STALE;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
- request->initiator = NL80211_REGDOM_SET_BY_USER,
+ request->initiator = NL80211_REGDOM_SET_BY_USER;
queue_regulatory_request(request);
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy;
struct iw_scan_req *wreq = NULL;
- struct cfg80211_scan_request *creq;
+ struct cfg80211_scan_request *creq = NULL;
int i, err, n_channels = 0;
enum ieee80211_band band;
/* translate "Scan for SSID" request */
if (wreq) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
- if (wreq->essid_len > IEEE80211_MAX_SSID_LEN)
- return -EINVAL;
+ if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) {
+ err = -EINVAL;
+ goto out;
+ }
memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len);
creq->ssids[0].ssid_len = wreq->essid_len;
}
err = rdev->ops->scan(wiphy, dev, creq);
if (err) {
rdev->scan_req = NULL;
- kfree(creq);
+ /* creq will be freed below */
} else {
nl80211_send_scan_start(rdev, dev);
+ /* creq now owned by driver */
+ creq = NULL;
dev_hold(dev);
}
out:
+ kfree(creq);
cfg80211_unlock_rdev(rdev);
return err;
}
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ wdev->wext.connect.ssid_len = 0;
#endif
}
return 0;
}
-void xfrm_spd_getinfo(struct xfrmk_spdinfo *si)
+void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si)
{
read_lock_bh(&xfrm_policy_lock);
- si->incnt = init_net.xfrm.policy_count[XFRM_POLICY_IN];
- si->outcnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT];
- si->fwdcnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD];
- si->inscnt = init_net.xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX];
- si->outscnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX];
- si->fwdscnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX];
- si->spdhcnt = init_net.xfrm.policy_idx_hmask;
+ si->incnt = net->xfrm.policy_count[XFRM_POLICY_IN];
+ si->outcnt = net->xfrm.policy_count[XFRM_POLICY_OUT];
+ si->fwdcnt = net->xfrm.policy_count[XFRM_POLICY_FWD];
+ si->inscnt = net->xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX];
+ si->outscnt = net->xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX];
+ si->fwdscnt = net->xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX];
+ si->spdhcnt = net->xfrm.policy_idx_hmask;
si->spdhmcnt = xfrm_policy_hashmax;
read_unlock_bh(&xfrm_policy_lock);
}
return tos;
}
-static inline struct xfrm_dst *xfrm_alloc_dst(int family)
+static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family)
{
struct xfrm_policy_afinfo *afinfo = xfrm_policy_get_afinfo(family);
+ struct dst_ops *dst_ops;
struct xfrm_dst *xdst;
if (!afinfo)
return ERR_PTR(-EINVAL);
- xdst = dst_alloc(afinfo->dst_ops) ?: ERR_PTR(-ENOBUFS);
+ switch (family) {
+ case AF_INET:
+ dst_ops = &net->xfrm.xfrm4_dst_ops;
+ break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ case AF_INET6:
+ dst_ops = &net->xfrm.xfrm6_dst_ops;
+ break;
+#endif
+ default:
+ BUG();
+ }
+ xdst = dst_alloc(dst_ops) ?: ERR_PTR(-ENOBUFS);
xfrm_policy_put_afinfo(afinfo);
struct flowi *fl,
struct dst_entry *dst)
{
+ struct net *net = xp_net(policy);
unsigned long now = jiffies;
struct net_device *dev;
struct dst_entry *dst_prev = NULL;
dst_hold(dst);
for (; i < nx; i++) {
- struct xfrm_dst *xdst = xfrm_alloc_dst(family);
+ struct xfrm_dst *xdst = xfrm_alloc_dst(net, family);
struct dst_entry *dst1 = &xdst->u.dst;
err = PTR_ERR(xdst);
if (!dev)
goto free_dst;
- /* Copy neighbout for reachability confirmation */
+ /* Copy neighbour for reachability confirmation */
dst0->neighbour = neigh_clone(dst->neighbour);
xfrm_init_path((struct xfrm_dst *)dst0, dst, nfheader_len);
int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
{
+ struct net *net;
int err = 0;
if (unlikely(afinfo == NULL))
return -EINVAL;
xfrm_policy_afinfo[afinfo->family] = afinfo;
}
write_unlock_bh(&xfrm_policy_afinfo_lock);
+
+ rtnl_lock();
+ for_each_net(net) {
+ struct dst_ops *xfrm_dst_ops;
+
+ switch (afinfo->family) {
+ case AF_INET:
+ xfrm_dst_ops = &net->xfrm.xfrm4_dst_ops;
+ break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ case AF_INET6:
+ xfrm_dst_ops = &net->xfrm.xfrm6_dst_ops;
+ break;
+#endif
+ default:
+ BUG();
+ }
+ *xfrm_dst_ops = *afinfo->dst_ops;
+ }
+ rtnl_unlock();
+
return err;
}
EXPORT_SYMBOL(xfrm_policy_register_afinfo);
}
EXPORT_SYMBOL(xfrm_policy_unregister_afinfo);
+static void __net_init xfrm_dst_ops_init(struct net *net)
+{
+ struct xfrm_policy_afinfo *afinfo;
+
+ read_lock_bh(&xfrm_policy_afinfo_lock);
+ afinfo = xfrm_policy_afinfo[AF_INET];
+ if (afinfo)
+ net->xfrm.xfrm4_dst_ops = *afinfo->dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ afinfo = xfrm_policy_afinfo[AF_INET6];
+ if (afinfo)
+ net->xfrm.xfrm6_dst_ops = *afinfo->dst_ops;
+#endif
+ read_unlock_bh(&xfrm_policy_afinfo_lock);
+}
+
static struct xfrm_policy_afinfo *xfrm_policy_get_afinfo(unsigned short family)
{
struct xfrm_policy_afinfo *afinfo;
rv = xfrm_policy_init(net);
if (rv < 0)
goto out_policy;
+ xfrm_dst_ops_init(net);
rv = xfrm_sysctl_init(net);
if (rv < 0)
goto out_sysctl;
}
EXPORT_SYMBOL(xfrm_state_flush);
-void xfrm_sad_getinfo(struct xfrmk_sadinfo *si)
+void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
{
spin_lock_bh(&xfrm_state_lock);
- si->sadcnt = init_net.xfrm.state_num;
- si->sadhcnt = init_net.xfrm.state_hmask;
+ si->sadcnt = net->xfrm.state_num;
+ si->sadhcnt = net->xfrm.state_hmask;
si->sadhmcnt = xfrm_state_hashmax;
spin_unlock_bh(&xfrm_state_lock);
}
+ nla_total_size(sizeof(struct xfrmu_spdhinfo));
}
-static int build_spdinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags)
+static int build_spdinfo(struct sk_buff *skb, struct net *net,
+ u32 pid, u32 seq, u32 flags)
{
struct xfrmk_spdinfo si;
struct xfrmu_spdinfo spc;
f = nlmsg_data(nlh);
*f = flags;
- xfrm_spd_getinfo(&si);
+ xfrm_spd_getinfo(net, &si);
spc.incnt = si.incnt;
spc.outcnt = si.outcnt;
spc.fwdcnt = si.fwdcnt;
if (r_skb == NULL)
return -ENOMEM;
- if (build_spdinfo(r_skb, spid, seq, *flags) < 0)
+ if (build_spdinfo(r_skb, net, spid, seq, *flags) < 0)
BUG();
return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid);
+ nla_total_size(4); /* XFRMA_SAD_CNT */
}
-static int build_sadinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags)
+static int build_sadinfo(struct sk_buff *skb, struct net *net,
+ u32 pid, u32 seq, u32 flags)
{
struct xfrmk_sadinfo si;
struct xfrmu_sadhinfo sh;
f = nlmsg_data(nlh);
*f = flags;
- xfrm_sad_getinfo(&si);
+ xfrm_sad_getinfo(net, &si);
sh.sadhmcnt = si.sadhmcnt;
sh.sadhcnt = si.sadhcnt;
if (r_skb == NULL)
return -ENOMEM;
- if (build_sadinfo(r_skb, spid, seq, *flags) < 0)
+ if (build_sadinfo(r_skb, net, spid, seq, *flags) < 0)
BUG();
return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid);
fsize=$$(stat -c "%s" $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
-printf "%08x" $$dec_size | \
- sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
+printf "%08x\n" $$dec_size | \
+ sed 's/\(..\)/\1 /g' | { \
+ read ch0 ch1 ch2 ch3; \
+ for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
+ printf '%s%03o' '\\' $$((0x$$ch)); \
+ done; \
+ } \
)
quiet_cmd_bzip2 = BZIP2 $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
+
+quiet_cmd_lzo = LZO $@
+cmd_lzo = (cat $(filter-out FORCE,$^) | \
+ lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
#!/usr/bin/perl -w
-# (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
+# (c) 2001, Dave Jones. (the file handling bit)
# (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
# (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
# (c) 2008,2009, Andy Whitcroft <apw@canonical.com>
foreach my $file (@files) {
-#Do not match excluded file patterns
-
- my $exclude = 0;
- foreach my $line (@typevalue) {
- if ($line =~ m/^(\C):\s*(.*)/) {
- my $type = $1;
- my $value = $2;
- if ($type eq 'X') {
- if (file_match_pattern($file, $value)) {
- $exclude = 1;
- last;
- }
- }
- }
- }
+ my %hash;
+ my $tvi = find_first_section();
+ while ($tvi < @typevalue) {
+ my $start = find_starting_index($tvi);
+ my $end = find_ending_index($tvi);
+ my $exclude = 0;
+ my $i;
+
+ #Do not match excluded file patterns
- if (!$exclude) {
- my $tvi = 0;
- my %hash;
- foreach my $line (@typevalue) {
+ for ($i = $start; $i < $end; $i++) {
+ my $line = $typevalue[$i];
if ($line =~ m/^(\C):\s*(.*)/) {
my $type = $1;
my $value = $2;
- if ($type eq 'F') {
+ if ($type eq 'X') {
if (file_match_pattern($file, $value)) {
- my $value_pd = ($value =~ tr@/@@);
- my $file_pd = ($file =~ tr@/@@);
- $value_pd++ if (substr($value,-1,1) ne "/");
- if ($pattern_depth == 0 ||
- (($file_pd - $value_pd) < $pattern_depth)) {
- $hash{$tvi} = $value_pd;
- }
+ $exclude = 1;
}
}
}
- $tvi++;
}
- foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) {
- add_categories($line);
+
+ if (!$exclude) {
+ for ($i = $start; $i < $end; $i++) {
+ my $line = $typevalue[$i];
+ if ($line =~ m/^(\C):\s*(.*)/) {
+ my $type = $1;
+ my $value = $2;
+ if ($type eq 'F') {
+ if (file_match_pattern($file, $value)) {
+ my $value_pd = ($value =~ tr@/@@);
+ my $file_pd = ($file =~ tr@/@@);
+ $value_pd++ if (substr($value,-1,1) ne "/");
+ if ($pattern_depth == 0 ||
+ (($file_pd - $value_pd) < $pattern_depth)) {
+ $hash{$tvi} = $value_pd;
+ }
+ }
+ }
+ }
+ }
}
+
+ $tvi += ($end - $start);
+
+ }
+
+ foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) {
+ add_categories($line);
}
if ($email && $email_git) {
return $formatted_email;
}
+sub find_first_section {
+ my $index = 0;
+
+ while ($index < @typevalue) {
+ my $tv = $typevalue[$index];
+ if (($tv =~ m/^(\C):\s*(.*)/)) {
+ last;
+ }
+ $index++;
+ }
+
+ return $index;
+}
+
sub find_starting_index {
my ($index) = @_;
if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
$target = $1;
}
- if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+ if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
match = strstr(symbol, name);
if (!match)
return 0;
- return match[strlen(symbol)] == '\0';
+ return match[strlen(name)] == '\0';
}
static void do_table(void *symval, unsigned long size,
}
}
-if ($arch eq "x86") {
+if ($arch =~ /(x86(_64)?)|(i386)/) {
if ($bits == 64) {
$arch = "x86_64";
} else {
* block. A pointer to that is in the struct vfsmount that we
* have around.
*/
- if (!parent ) {
- if (mount && mount->mnt_sb) {
- parent = mount->mnt_sb->s_root;
- }
- }
- if (!parent) {
- pr_debug("securityfs: Ah! can not find a parent!\n");
- return -EFAULT;
- }
+ if (!parent)
+ parent = mount->mnt_sb->s_root;
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
initrlim = init_task.signal->rlim + i;
rlim->rlim_cur = min(rlim->rlim_max, initrlim->rlim_cur);
}
- update_rlimit_cpu(rlim->rlim_cur);
+ update_rlimit_cpu(current->signal->rlim[RLIMIT_CPU].rlim_cur);
}
}
return tomoyo_find_next_domain(bprm);
/*
* Read permission is checked against interpreters using next domain.
- * '1' is the result of open_to_namei_flags(O_RDONLY).
*/
- return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1);
+ return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY);
}
static int tomoyo_path_truncate(struct path *path, loff_t length,
static int tomoyo_dentry_open(struct file *f, const struct cred *cred)
{
int flags = f->f_flags;
-
- if ((flags + 1) & O_ACCMODE)
- flags++;
- flags |= f->f_flags & (O_APPEND | O_TRUNC);
/* Don't check read permission here if called from do_execve(). */
if (current->in_execve)
return 0;
struct snd_pcm_hw_params *params)
{
int err;
+ struct aaci *aaci = substream->private_data;
aaci_pcm_hw_free(substream);
if (aacirun->pcm_open) {
static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
- struct aaci *aaci = substream->private_data;
struct aaci_runtime *aacirun = substream->runtime->private_data;
unsigned int channels = params_channels(params);
int ret;
static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
- struct aaci *aaci = substream->private_data;
struct aaci_runtime *aacirun = substream->runtime->private_data;
int ret;
err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE,
hw->rate_min, hw->rate_max);
- if (err < 0)
- return err;
+ if (err < 0)
+ return err;
err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
hw->period_bytes_min, hw->period_bytes_max);
- if (err < 0)
- return err;
+ if (err < 0)
+ return err;
err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIODS,
hw->periods_min, hw->periods_max);
unregister_chrdev(major, "alsa");
}
-module_init(alsa_sound_init)
-module_exit(alsa_sound_exit)
+subsys_initcall(alsa_sound_init);
+module_exit(alsa_sound_exit);
default:
return -EINVAL;
}
- if (snd_BUG_ON(minor < 0 || minor >= SNDRV_OSS_MINORS))
+ if (minor < 0 || minor >= SNDRV_OSS_MINORS)
return -EINVAL;
return minor;
}
static void __devinit
size_dram(struct snd_emu8000 *emu)
{
- int i, size;
+ int i, size, detected_size;
if (emu->dram_checked)
return;
size = 0;
+ detected_size = 0;
/* write out a magic number */
snd_emu8000_dma_chan(emu, 0, EMU8000_RAM_WRITE);
while (size < EMU8000_MAX_DRAM) {
+ size += 512 * 1024; /* increment 512kbytes */
+
/* Write a unique data on the test address.
* if the address is out of range, the data is written on
* 0x200000(=EMU8000_DRAM_OFFSET). Then the id word is
if (EMU8000_SMLD_READ(emu) != UNIQUE_ID2)
break; /* no memory at this address */
- size += 512 * 1024; /* increment 512kbytes */
+ detected_size = size;
snd_emu8000_read_wait(emu);
snd_emu8000_dma_chan(emu, 1, EMU8000_RAM_CLOSE);
snd_printdd("EMU8000 [0x%lx]: %d Kb on-board memory detected\n",
- emu->port1, size/1024);
+ emu->port1, detected_size/1024);
- emu->mem_size = size;
+ emu->mem_size = detected_size;
emu->dram_checked = 1;
}
return -(EBUSY);
}
d = (struct audio_driver *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_driver)));
-
- if (sound_nblocks < 1024)
- sound_nblocks++;
+ sound_nblocks++;
+ if (sound_nblocks >= MAX_MEM_BLOCKS)
+ sound_nblocks = MAX_MEM_BLOCKS - 1;
op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations)));
+ sound_nblocks++;
+ if (sound_nblocks >= MAX_MEM_BLOCKS)
+ sound_nblocks = MAX_MEM_BLOCKS - 1;
- if (sound_nblocks < 1024)
- sound_nblocks++;
if (d == NULL || op == NULL) {
printk(KERN_ERR "Sound: Can't allocate driver for (%s)\n", name);
sound_unload_audiodev(num);
until you unload sound! */
op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations)));
+ sound_nblocks++;
+ if (sound_nblocks >= MAX_MEM_BLOCKS)
+ sound_nblocks = MAX_MEM_BLOCKS - 1;
- if (sound_nblocks < 1024)
- sound_nblocks++;
if (op == NULL) {
printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
return -ENOMEM;
#define TIMER_ARMED 121234
#define TIMER_NOT_ARMED 1
+#define MAX_MEM_BLOCKS 1024
+
#endif
/*
* Table for permanently allocated memory (used when unloading the module)
*/
-void * sound_mem_blocks[1024];
+void * sound_mem_blocks[MAX_MEM_BLOCKS];
int sound_nblocks = 0;
/* Persistent DMA buffers */
NULL, "%s%d", dev_list[i].name, j);
}
- if (sound_nblocks >= 1024)
+ if (sound_nblocks >= MAX_MEM_BLOCKS - 1)
printk(KERN_ERR "Sound warning: Deallocation table was too small.\n");
return 0;
{ 0x4e534300, 0xffffff00, "National Semiconductor", NULL, NULL },
{ 0x50534300, 0xffffff00, "Philips", NULL, NULL },
{ 0x53494c00, 0xffffff00, "Silicon Laboratory", NULL, NULL },
+{ 0x53544d00, 0xffffff00, "STMicroelectronics", NULL, NULL },
{ 0x54524100, 0xffffff00, "TriTech", NULL, NULL },
{ 0x54584e00, 0xffffff00, "Texas Instruments", NULL, NULL },
{ 0x56494100, 0xffffff00, "VIA Technologies", NULL, NULL },
{ 0x4e534350, 0xffffffff, "LM4550", patch_lm4550, NULL }, // volume wrap fix
{ 0x50534304, 0xffffffff, "UCB1400", patch_ucb1400, NULL },
{ 0x53494c20, 0xffffffe0, "Si3036,8", mpatch_si3036, mpatch_si3036, AC97_MODEM_PATCH },
+{ 0x53544d02, 0xffffffff, "ST7597", NULL, NULL },
{ 0x54524102, 0xffffffff, "TR28022", NULL, NULL },
{ 0x54524103, 0xffffffff, "TR28023", NULL, NULL },
{ 0x54524106, 0xffffffff, "TR28026", NULL, NULL },
{
/* filter some registers for buggy codecs */
switch (ac97->id) {
+ case AC97_ID_ST_AC97_ID4:
+ if (reg == 0x08)
+ return 0;
+ /* fall through */
+ case AC97_ID_ST7597:
+ if (reg == 0x22 || reg == 0x7a)
+ return 1;
+ /* fall through */
case AC97_ID_AK4540:
case AC97_ID_AK4542:
if (reg <= 0x1c || reg == 0x20 || reg == 0x26 || reg >= 0x7c)
#define AC97_ID_CM9761_78 0x434d4978
#define AC97_ID_CM9761_82 0x434d4982
#define AC97_ID_CM9761_83 0x434d4983
+#define AC97_ID_ST7597 0x53544d02
+#define AC97_ID_ST_AC97_ID4 0x53544d04
0x10140554, /* Thinkpad T42p/R50p */
0x10140567, /* Thinkpad T43p 2668-G7U */
0x10140581, /* Thinkpad X41-2527 */
+ 0x10280160, /* Dell Dimension 2400 */
0x104380b0, /* Asus A7V8X-MX */
0x11790241, /* Toshiba Satellite A-15 S127 */
0x144dc01a, /* Samsung NP-X20C004/SEG */
MODULE_DEVICE_TABLE(pci, snd_atiixp_ids);
static struct snd_pci_quirk atiixp_quirks[] __devinitdata = {
+ SND_PCI_QUIRK(0x105b, 0x0c81, "Foxconn RC4107MA-RS2", 0),
SND_PCI_QUIRK(0x15bd, 0x3100, "DFI RS482", 0),
{ } /* terminator */
};
return;
/* generate tone */
- snd_hda_codec_write_cache(codec, beep->nid, 0,
+ snd_hda_codec_write(codec, beep->nid, 0,
AC_VERB_SET_BEEP_CONTROL, beep->tone);
}
beep->dev = NULL;
cancel_work_sync(&beep->beep_work);
/* turn off beep for sure */
- snd_hda_codec_write_cache(beep->codec, beep->nid, 0,
+ snd_hda_codec_write(beep->codec, beep->nid, 0,
AC_VERB_SET_BEEP_CONTROL, 0);
}
beep->enabled = enable;
if (!enable) {
/* turn off beep */
- snd_hda_codec_write_cache(beep->codec, beep->nid, 0,
+ snd_hda_codec_write(beep->codec, beep->nid, 0,
AC_VERB_SET_BEEP_CONTROL, 0);
}
if (beep->mode == HDA_BEEP_MODE_SWREG) {
mutex_init(&beep->mutex);
if (beep->mode == HDA_BEEP_MODE_ON) {
- beep->enabled = 1;
- snd_hda_do_register(&beep->register_work);
+ int err = snd_hda_do_attach(beep);
+ if (err < 0) {
+ kfree(beep);
+ codec->beep = NULL;
+ return err;
+ }
}
return 0;
if (beep) {
cancel_work_sync(&beep->register_work);
cancel_delayed_work(&beep->unregister_work);
- if (beep->enabled)
+ if (beep->dev)
snd_hda_do_detach(beep);
codec->beep = NULL;
kfree(beep);
*/
u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
{
- u32 pincap = snd_hda_query_pin_caps(codec, nid);
-
- if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
- snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ u32 pincap;
+ if (!codec->no_trigger_sense) {
+ pincap = snd_hda_query_pin_caps(codec, nid);
+ if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ }
return snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
}
unsigned int pin_amp_workaround:1; /* pin out-amp takes index
* (e.g. Conexant codecs)
*/
+ unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
unsigned int power_transition :1; /* power-state in transition */
*/
unsigned char stream_tag; /* assigned stream */
unsigned char index; /* stream index */
+ int device; /* last device number assigned to */
unsigned int opened :1;
unsigned int running :1;
*/
/* assign a stream for the PCM */
-static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream)
+static inline struct azx_dev *
+azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream)
{
int dev, i, nums;
- if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ struct azx_dev *res = NULL;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dev = chip->playback_index_offset;
nums = chip->playback_streams;
} else {
}
for (i = 0; i < nums; i++, dev++)
if (!chip->azx_dev[dev].opened) {
- chip->azx_dev[dev].opened = 1;
- return &chip->azx_dev[dev];
+ res = &chip->azx_dev[dev];
+ if (res->device == substream->pcm->device)
+ break;
}
- return NULL;
+ if (res) {
+ res->opened = 1;
+ res->device = substream->pcm->device;
+ }
+ return res;
}
/* release the assigned stream */
int err;
mutex_lock(&chip->open_mutex);
- azx_dev = azx_assign_device(chip, substream->stream);
+ azx_dev = azx_assign_device(chip, substream);
if (azx_dev == NULL) {
mutex_unlock(&chip->open_mutex);
return -EBUSY;
*/
spec->multiout.no_share_stream = 1;
+ codec->no_trigger_sense = 1;
+
return 0;
}
codec->patch_ops = ad198x_patch_ops;
+ codec->no_trigger_sense = 1;
+
return 0;
}
codec->patch_ops.unsol_event = ad1981_hp_unsol_event;
break;
}
+
+ codec->no_trigger_sense = 1;
+
return 0;
}
#endif
spec->vmaster_nid = 0x04;
+ codec->no_trigger_sense = 1;
+
return 0;
}
codec->patch_ops = ad198x_patch_ops;
+ codec->no_trigger_sense = 1;
+
return 0;
}
break;
}
+ codec->no_trigger_sense = 1;
+
return 0;
}
spec->mixers[2] = ad1882_6stack_mixers;
break;
}
+
+ codec->no_trigger_sense = 1;
+
return 0;
}
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010);
}
+/* turn on/off EAPD control (only if available) */
+static void set_eapd(struct hda_codec *codec, hda_nid_t nid, int on)
+{
+ if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+ return;
+ if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
+ on ? 2 : 0);
+}
+
static void alc_auto_init_amp(struct hda_codec *codec, int type)
{
unsigned int tmp;
case ALC_INIT_DEFAULT:
switch (codec->vendor_id) {
case 0x10ec0260:
- snd_hda_codec_write(codec, 0x0f, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
- snd_hda_codec_write(codec, 0x10, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
+ set_eapd(codec, 0x0f, 1);
+ set_eapd(codec, 0x10, 1);
break;
case 0x10ec0262:
case 0x10ec0267:
case 0x10ec0268:
case 0x10ec0269:
+ case 0x10ec0270:
case 0x10ec0272:
case 0x10ec0660:
case 0x10ec0662:
case 0x10ec0663:
case 0x10ec0862:
case 0x10ec0889:
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
- snd_hda_codec_write(codec, 0x15, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 2);
+ set_eapd(codec, 0x14, 1);
+ set_eapd(codec, 0x15, 1);
break;
}
switch (codec->vendor_id) {
return; /* invalid entry */
}
}
+ if (!ext || !fixed)
+ return;
if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
return; /* no unsol support */
snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n",
#ifdef CONFIG_SND_HDA_POWER_SAVE
static void alc889_power_eapd(struct hda_codec *codec, int power)
{
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
- snd_hda_codec_write(codec, 0x15, 0,
- AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
+ set_eapd(codec, 0x14, power);
+ set_eapd(codec, 0x15, power);
}
#endif
spec->auto_mic = 0; /* disable auto-mic to be sure */
}
+/* choose the ADC/MUX containing the input pin and initialize the setup */
+static void fixup_single_adc(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+ int i;
+
+ /* search for the input pin; there must be only one */
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (spec->autocfg.input_pins[i]) {
+ pin = spec->autocfg.input_pins[i];
+ break;
+ }
+ }
+ if (!pin)
+ return;
+
+ /* set the default connection to that pin */
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ hda_nid_t cap = spec->capsrc_nids ?
+ spec->capsrc_nids[i] : spec->adc_nids[i];
+ int idx;
+
+ idx = get_connection_index(codec, cap, pin);
+ if (idx < 0)
+ continue;
+ /* use only this ADC */
+ if (spec->capsrc_nids)
+ spec->capsrc_nids += i;
+ spec->adc_nids += i;
+ spec->num_adc_nids = 1;
+ /* select or unmute this route */
+ if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) {
+ snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx,
+ HDA_AMP_MUTE, 0);
+ } else {
+ snd_hda_codec_write_cache(codec, cap, 0,
+ AC_VERB_SET_CONNECT_SEL, idx);
+ }
+ return;
+ }
+}
+
static void set_capture_mixer(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
alc_capture_mixer3 },
};
if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
- int mux;
- if (spec->auto_mic) {
- mux = 0;
+ int mux = 0;
+ if (spec->auto_mic)
fixup_automic_adc(codec);
- } else if (spec->input_mux && spec->input_mux->num_items > 1)
- mux = 1;
- else
- mux = 0;
+ else if (spec->input_mux) {
+ if (spec->input_mux->num_items > 1)
+ mux = 1;
+ else if (spec->input_mux->num_items == 1)
+ fixup_single_adc(codec);
+ }
spec->cap_mixer = caps[mux][spec->num_adc_nids - 1];
}
}
HDA_BIND_MUTE ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Front Mic pin: input vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
spec->autocfg.speaker_pins[0] = 0x14;
}
+static void alc885_mb5_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+
+}
+
+static void alc885_mb5_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ /* Headphone insertion or removal. */
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc885_mb5_automute(codec);
+}
+
static void alc885_imac91_automute(struct hda_codec *codec)
{
unsigned int present;
.input_mux = &mb5_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc885_mb5_unsol_event,
+ .init_hook = alc885_mb5_automute,
},
[ALC885_MACPRO] = {
.mixers = { alc882_macpro_mixer },
.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
.channel_mode = alc883_3ST_6ch_modes,
.need_dac_fix = 1,
+ .const_channel_count = 6,
.num_mux_defs =
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_2_capture_sources,
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
+ spec->autocfg.speaker_pins[0] = 0x14;
}
static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
}
#define alc262_auto_create_input_ctls \
- alc880_auto_create_input_ctls
+ alc882_auto_create_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
- .unsol_event = alc_automute_amp_unsol_event,
+ .unsol_event = alc_sku_unsol_event,
.setup = alc262_hp_t5735_setup,
- .init_hook = alc_automute_amp,
+ .init_hook = alc_inithook,
},
[ALC262_HP_RP5700] = {
.mixers = { alc262_hp_rp5700_mixer },
dac = 0x02;
break;
case 0x15:
+ case 0x21:
dac = 0x03;
break;
default:
spec->stream_digital_playback = &alc861_pcm_digital_playback;
spec->stream_digital_capture = &alc861_pcm_digital_capture;
+ if (!spec->cap_mixer)
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
spec->vmaster_nid = 0x03;
static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x22, 0);
}
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
+ SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
{
if (!nid)
return 0;
- /* NOTE: we can't use snd_hda_jack_detect() here because STAC/IDT
- * codecs behave wrongly when SET_PIN_SENSE is triggered, although
- * the pincap gives TRIG_REQ bit.
- */
- if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0) &
- AC_PINSENSE_PRESENCE)
- return 1;
- return 0;
+ return snd_hda_jack_detect(codec, nid);
}
static void stac92xx_line_out_detect(struct hda_codec *codec,
}
}
+static int hp_blike_system(u32 subsystem_id);
+
+static void set_hp_led_gpio(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ switch (codec->vendor_id) {
+ case 0x111d7608:
+ /* GPIO 0 */
+ spec->gpio_led = 0x01;
+ break;
+ case 0x111d7600:
+ case 0x111d7601:
+ case 0x111d7602:
+ case 0x111d7603:
+ /* GPIO 3 */
+ spec->gpio_led = 0x08;
+ break;
+ }
+}
+
/*
* This method searches for the mute LED GPIO configuration
* provided as OEM string in SMBIOS. The format of that string
*
* So, HP B-series like systems may have HP_Mute_LED_0 (current models)
* or HP_Mute_LED_0_3 (future models) OEM SMBIOS strings
+ *
+ *
+ * The dv-series laptops don't seem to have the HP_Mute_LED* strings in
+ * SMBIOS - at least the ones I have seen do not have them - which include
+ * my own system (HP Pavilion dv6-1110ax) and my cousin's
+ * HP Pavilion dv9500t CTO.
+ * Need more information on whether it is true across the entire series.
+ * -- kunal
*/
static int find_mute_led_gpio(struct hda_codec *codec)
{
while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
NULL, dev))) {
if (sscanf(dev->name, "HP_Mute_LED_%d_%d",
- &spec->gpio_led_polarity,
- &spec->gpio_led) == 2) {
+ &spec->gpio_led_polarity,
+ &spec->gpio_led) == 2) {
spec->gpio_led = 1 << spec->gpio_led;
return 1;
}
if (sscanf(dev->name, "HP_Mute_LED_%d",
- &spec->gpio_led_polarity) == 1) {
- switch (codec->vendor_id) {
- case 0x111d7608:
- /* GPIO 0 */
- spec->gpio_led = 0x01;
- return 1;
- case 0x111d7600:
- case 0x111d7601:
- case 0x111d7602:
- case 0x111d7603:
- /* GPIO 3 */
- spec->gpio_led = 0x08;
- return 1;
- }
+ &spec->gpio_led_polarity) == 1) {
+ set_hp_led_gpio(codec);
+ return 1;
}
}
+
+ /*
+ * Fallback case - if we don't find the DMI strings,
+ * we statically set the GPIO - if not a B-series system.
+ */
+ if (!hp_blike_system(codec->subsystem_id)) {
+ set_hp_led_gpio(codec);
+ spec->gpio_led_polarity = 1;
+ return 1;
+ }
}
return 0;
}
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
spec->pin_nids = stac9200_pin_nids;
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
spec->pin_nids = stac925x_pin_nids;
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
codec->slave_dig_outs = stac92hd73xx_slave_dig_outs;
spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids);
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->digbeep_nid = 0x21;
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
codec->patch_ops = stac92xx_patch_ops;
spec->num_pins = STAC92HD71BXX_NUM_PINS;
spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
+ snd_printdd("Found board config: %d\n", spec->board_config);
+
switch (spec->board_config) {
case STAC_HP_M4:
/* enable internal microphone */
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac922x_pin_nids);
spec->pin_nids = stac922x_pin_nids;
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
codec->slave_dig_outs = stac927x_slave_dig_outs;
spec->num_pins = ARRAY_SIZE(stac927x_pin_nids);
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac9205_pin_nids);
spec->pin_nids = stac9205_pin_nids;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
+ codec->no_trigger_sense = 1;
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
spec->pin_nids = stac9872_pin_nids;
rptr.retwords[2] != M &&
rptr.retwords[3] != N &&
i++ < MAX_WRITE_RETRY);
- if (i == MAX_WRITE_RETRY) {
+ if (i > MAX_WRITE_RETRY) {
snd_printdd("sent samplerate %d: %d failed\n",
*intdec, rate);
return -EIO;
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
+ ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
+ if (ret < 0) {
+ printk(KERN_ERR "ASoC: failed to init gen ac97 glue\n");
+ goto err;
+ }
+
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0)
iface |= 0x3 << 8;
break;
case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x3 << 8; /* lg not sure which mode */
+ iface |= 0x3 << 8 | WM8350_AIF_LRCLK_INV;
break;
default:
return -EINVAL;
/* filter coefficient */
switch (params_rate(params)) {
- case SNDRV_PCM_RATE_8000:
+ case 8000:
adn |= 0x5 << 1;
break;
- case SNDRV_PCM_RATE_11025:
+ case 11025:
adn |= 0x4 << 1;
break;
- case SNDRV_PCM_RATE_16000:
+ case 16000:
adn |= 0x3 << 1;
break;
- case SNDRV_PCM_RATE_22050:
+ case 22050:
adn |= 0x2 << 1;
break;
- case SNDRV_PCM_RATE_32000:
+ case 32000:
adn |= 0x1 << 1;
break;
- case SNDRV_PCM_RATE_44100:
- case SNDRV_PCM_RATE_48000:
+ case 44100:
+ case 48000:
break;
}
struct i2c_client *i2c = codec->control_data;
int i;
u16 *reg_cache = codec->reg_cache;
- u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults),
+ u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
GFP_KERNEL);
/* Bring the codec back up to standby first to minimise pop/clicks */
for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
if (tmp_cache[i] != reg_cache[i])
snd_soc_write(codec, i, tmp_cache[i]);
+ kfree(tmp_cache);
} else {
dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
}
iface |= (1 << 9);
switch (params_rate(params)) {
- case SNDRV_PCM_RATE_8000:
+ case 8000:
addcntrl |= (0x5 << 1);
break;
- case SNDRV_PCM_RATE_11025:
+ case 11025:
addcntrl |= (0x4 << 1);
break;
- case SNDRV_PCM_RATE_16000:
+ case 16000:
addcntrl |= (0x3 << 1);
break;
- case SNDRV_PCM_RATE_22050:
+ case 22050:
addcntrl |= (0x2 << 1);
break;
- case SNDRV_PCM_RATE_32000:
+ case 32000:
addcntrl |= (0x1 << 1);
break;
- case SNDRV_PCM_RATE_44100:
- case SNDRV_PCM_RATE_48000:
+ case 44100:
+ case 48000:
break;
}
ret = snd_soc_write(codec, WM8940_ADDCNTRL, addcntrl);
/* filter coefficient */
switch (params_rate(params)) {
- case SNDRV_PCM_RATE_8000:
+ case 8000:
adn |= 0x5 << 1;
break;
- case SNDRV_PCM_RATE_11025:
+ case 11025:
adn |= 0x4 << 1;
break;
- case SNDRV_PCM_RATE_16000:
+ case 16000:
adn |= 0x3 << 1;
break;
- case SNDRV_PCM_RATE_22050:
+ case 22050:
adn |= 0x2 << 1;
break;
- case SNDRV_PCM_RATE_32000:
+ case 32000:
adn |= 0x1 << 1;
break;
- case SNDRV_PCM_RATE_44100:
- case SNDRV_PCM_RATE_48000:
+ case 44100:
+ case 48000:
break;
}
.codec_dev = &soc_codec_dev_ak4642,
};
-#define AK4642_BUS 0
-#define AK4642_ADR 0x12
-static int ak4642_add_i2c_device(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = AK4642_ADR;
- strlcpy(info.type, "ak4642", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(AK4642_BUS);
- if (!adapter) {
- printk(KERN_DEBUG "can't get i2c adapter\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_DEBUG "can't add i2c device\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *fsi_snd_device;
static int __init fsi_ak4642_init(void)
{
int ret = -ENOMEM;
- ak4642_add_i2c_device();
-
fsi_snd_device = platform_device_alloc("soc-audio", -1);
if (!fsi_snd_device)
goto out;
class_destroy(sound_class);
}
-module_init(init_soundcore);
+subsys_initcall(init_soundcore);
module_exit(cleanup_soundcore);
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_usb_substream *subs = &as->substream[direction];
- if (subs->interface >= 0) {
+ if (!as->chip->shutdown && subs->interface >= 0) {
usb_set_interface(subs->dev, subs->interface, 0);
subs->interface = -1;
}
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(V), 2)
+ QUIET_STDERR = ">/dev/null"
+else
+ QUIET_STDERR = ">/dev/null 2>&1"
+endif
+
+BITBUCKET = "/dev/null"
+
+ifneq ($(shell sh -c "(echo '\#include <stdio.h>'; echo 'int main(void) { return puts(\"hi\"); }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
+ BITBUCKET = .perf.dev.null
+endif
+
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
CFLAGS := $(CFLAGS) -fstack-protector-all
endif
LIB_H += util/include/linux/types.h
LIB_H += util/include/asm/asm-offsets.h
LIB_H += util/include/asm/bitops.h
+LIB_H += util/include/asm/bug.h
LIB_H += util/include/asm/byteorder.h
LIB_H += util/include/asm/swab.h
LIB_H += util/include/asm/system.h
LIB_H += util/include/asm/uaccess.h
LIB_H += perf.h
+LIB_H += util/cache.h
+LIB_H += util/callchain.h
+LIB_H += util/debug.h
LIB_H += util/debugfs.h
LIB_H += util/event.h
+LIB_H += util/exec_cmd.h
LIB_H += util/types.h
LIB_H += util/levenshtein.h
LIB_H += util/parse-options.h
LIB_H += util/strbuf.h
LIB_H += util/string.h
LIB_H += util/strlist.h
+LIB_H += util/svghelper.h
LIB_H += util/run-command.h
LIB_H += util/sigchain.h
LIB_H += util/symbol.h
LIB_H += util/sort.h
LIB_H += util/hist.h
LIB_H += util/thread.h
+LIB_H += util/trace-event.h
+LIB_H += util/trace-event-perl.h
LIB_H += util/probe-finder.h
LIB_H += util/probe-event.h
PERFLIBS = $(LIB_FILE)
-ifeq ($(V), 2)
- QUIET_STDERR = ">/dev/null"
-else
- QUIET_STDERR = ">/dev/null 2>&1"
-endif
#
# Platform specific tweaks
#
PTHREAD_LIBS =
endif
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
endif
- ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
BASIC_CFLAGS += -DLIBELF_NO_MMAP
endif
else
msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
endif
-ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
BASIC_CFLAGS += -DNO_LIBDWARF
else
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
endif
-ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o /dev/null $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o $(BITBUCKET) $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
BASIC_CFLAGS += -DNO_LIBPERL
else
ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
else
- has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd),y)
EXTLIBS += -lbfd
else
- has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty),y)
EXTLIBS += -lbfd -liberty
else
- has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty_z),y)
EXTLIBS += -lbfd -liberty -lz
else
- has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_cplus_demangle),y)
EXTLIBS += -liberty
BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
SHELL = $(SHELL_PATH)
-all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
+all:: .perf.dev.null shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
ifneq (,$X)
$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
endif
.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
.PHONY: .FORCE-PERF-BUILD-OPTIONS
+.perf.dev.null:
+ touch .perf.dev.null
+
+.INTERMEDIATE: .perf.dev.null
+
### Make sure built-ins do not have dups and listed in perf.c
#
check-builtins::
static char const *input_name = "perf.data";
static int force;
-static const char *const buildid_list_usage[] = {
+static const char * const buildid_list_usage[] = {
"perf buildid-list [<options>]",
NULL
};
return ret;
}
-static const char *const diff_usage[] = {
+static const char * const diff_usage[] = {
"perf diff [<options>] [old_file] [new_file]",
+ NULL,
};
static const struct option options[] = {
if (data && data->ptr == ptr) {
data->hit++;
data->bytes_req += bytes_req;
- data->bytes_alloc += bytes_req;
+ data->bytes_alloc += bytes_alloc;
} else {
data = malloc(sizeof(*data));
if (!data)
if (data && data->call_site == call_site) {
data->hit++;
data->bytes_req += bytes_req;
- data->bytes_alloc += bytes_req;
+ data->bytes_alloc += bytes_alloc;
} else {
data = malloc(sizeof(*data));
if (!data)
printf("%.102s\n", graph_dotted_line);
printf(" %-34s |", is_caller ? "Callsite": "Alloc Ptr");
- printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n");
+ printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n");
printf("%.102s\n", graph_dotted_line);
next = rb_first(root);
snprintf(buf, sizeof(buf), "%#Lx", addr);
printf(" %-34s |", buf);
- printf(" %9llu/%-5lu | %9llu/%-5lu | %6lu | %8lu | %6.3f%%\n",
+ printf(" %9llu/%-5lu | %9llu/%-5lu | %8lu | %8lu | %6.3f%%\n",
(unsigned long long)data->bytes_alloc,
(unsigned long)data->bytes_alloc / data->hit,
(unsigned long long)data->bytes_req,
setup_sorting(&alloc_sort, default_sort_order);
return __cmd_kmem();
- }
+ } else
+ usage_with_options(kmem_usage, kmem_options);
return 0;
}
perf_header__write(&session->header, output, true);
}
-static int __cmd_record(int argc __used, const char **argv)
+static int __cmd_record(int argc, const char **argv)
{
int i, counter;
struct stat st;
int err;
unsigned long waking = 0;
int child_ready_pipe[2], go_pipe[2];
+ const bool forks = target_pid == -1 && argc > 0;
char buf;
page_size = sysconf(_SC_PAGE_SIZE);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
- if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) {
+ if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perror("failed to create pipes");
exit(-1);
}
atexit(atexit_header);
- if (target_pid == -1) {
+ if (forks) {
pid = fork();
if (pid < 0) {
perror("failed to fork");
return err;
}
- if (!system_wide)
+ if (!system_wide && profile_cpu == -1)
event__synthesize_thread(pid, process_synthesized_event,
session);
else
/*
* Let the child rip
*/
- close(go_pipe[1]);
+ if (forks)
+ close(go_pipe[1]);
for (;;) {
int hits = samples;
argc = parse_options(argc, argv, options, record_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
- if (!argc && target_pid == -1 && (!system_wide || profile_cpu == -1))
+ if (!argc && target_pid == -1 && !system_wide && profile_cpu == -1)
usage_with_options(record_usage, options);
symbol__init();
return 0;
}
-//static const char * const report_usage[] = {
-const char * const report_usage[] = {
+static const char * const report_usage[] = {
"perf report [<options>] <command>",
NULL
};
static int process_comm_event(event_t *event, struct perf_session *session __used)
{
- pid_set_comm(event->comm.pid, event->comm.comm);
+ pid_set_comm(event->comm.tid, event->comm.comm);
return 0;
}
return path;
}
-static const char * const annotate_usage[] = {
+static const char * const trace_usage[] = {
"perf trace [<options>] <command>",
NULL
};
setup_scripting();
- argc = parse_options(argc, argv, options, annotate_usage,
+ argc = parse_options(argc, argv, options, trace_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (symbol__init() < 0)
The special file descriptor is opened via the perf_event_open()
system call:
- int sys_perf_event_open(struct perf_event_hw_event *hw_event_uptr,
+ int sys_perf_event_open(struct perf_event_attr *hw_event_uptr,
pid_t pid, int cpu, int group_fd,
unsigned long flags);
Multiple counters can be kept open at a time, and the counters
can be poll()ed.
-When creating a new counter fd, 'perf_event_hw_event' is:
+When creating a new counter fd, 'perf_event_attr' is:
-struct perf_event_hw_event {
+struct perf_event_attr {
/*
* The MSB of the config word signifies if the rest contains cpu
* specific (raw) counter configuration data, if unset, the next
fcntl() managing signals.
Normally a notification is generated for every page filled, however one can
-additionally set perf_event_hw_event.wakeup_events to generate one every
+additionally set perf_event_attr.wakeup_events to generate one every
so many counter overflow events.
Future work will include a splice() interface to the ring-buffer.
Support loading of a LZMA encoded initial ramdisk or cpio buffer
If unsure, say N.
+config RD_LZO
+ bool "Support initial ramdisks compressed using LZO" if EMBEDDED
+ default !EMBEDDED
+ depends on BLK_DEV_INITRD
+ select DECOMPRESS_LZO
+ help
+ Support loading of a LZO encoded initial ramdisk or cpio buffer
+ If unsure, say N.
+
choice
prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!=""
help
bool "Gzip"
depends on RD_GZIP
help
- The old and tried gzip compression. Its compression ratio is
- the poorest among the 3 choices; however its speed (both
- compression and decompression) is the fastest.
+ The old and tried gzip compression. It provides a good balance
+ between compression ratio and decompression speed.
config INITRAMFS_COMPRESSION_BZIP2
bool "Bzip2"
depends on RD_BZIP2
help
Its compression ratio and speed is intermediate.
- Decompression speed is slowest among the three. The initramfs
+ Decompression speed is slowest among the four. The initramfs
size is about 10% smaller with bzip2, in comparison to gzip.
Bzip2 uses a large amount of memory. For modern kernels you
will need at least 8MB RAM or more for booting.
help
The most recent compression algorithm.
Its ratio is best, decompression speed is between the other
- two. Compression is slowest. The initramfs size is about 33%
+ three. Compression is slowest. The initramfs size is about 33%
smaller with LZMA in comparison to gzip.
+config INITRAMFS_COMPRESSION_LZO
+ bool "LZO"
+ depends on RD_LZO
+ help
+ Its compression ratio is the poorest among the four. The kernel
+ size is about about 10% bigger than gzip; however its speed
+ (both compression and decompression) is the fastest.
+
endchoice
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
- down_read(&kvm->slots_lock);
mutex_lock(&kvm->lock);
+ down_read(&kvm->slots_lock);
match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
assigned_dev->assigned_dev_id);
}
out:
- mutex_unlock(&kvm->lock);
up_read(&kvm->slots_lock);
+ mutex_unlock(&kvm->lock);
return r;
out_list_del:
list_del(&match->list);
pci_dev_put(dev);
out_free:
kfree(match);
- mutex_unlock(&kvm->lock);
up_read(&kvm->slots_lock);
+ mutex_unlock(&kvm->lock);
return r;
}
irqfd_shutdown(struct work_struct *work)
{
struct _irqfd *irqfd = container_of(work, struct _irqfd, shutdown);
+ u64 cnt;
/*
* Synchronize with the wait-queue and unhook ourselves to prevent
* further events.
*/
- remove_wait_queue(irqfd->wqh, &irqfd->wait);
+ eventfd_ctx_remove_wait_queue(irqfd->eventfd, &irqfd->wait, &cnt);
/*
* We know no new events will be scheduled at this point, so block
static int
kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
{
- struct _irqfd *irqfd;
+ struct _irqfd *irqfd, *tmp;
struct file *file = NULL;
struct eventfd_ctx *eventfd = NULL;
int ret;
init_waitqueue_func_entry(&irqfd->wait, irqfd_wakeup);
init_poll_funcptr(&irqfd->pt, irqfd_ptable_queue_proc);
+ spin_lock_irq(&kvm->irqfds.lock);
+
+ ret = 0;
+ list_for_each_entry(tmp, &kvm->irqfds.items, list) {
+ if (irqfd->eventfd != tmp->eventfd)
+ continue;
+ /* This fd is used for another irq already. */
+ ret = -EBUSY;
+ spin_unlock_irq(&kvm->irqfds.lock);
+ goto fail;
+ }
+
events = file->f_op->poll(file, &irqfd->pt);
- spin_lock_irq(&kvm->irqfds.lock);
list_add_tail(&irqfd->list, &kvm->irqfds.items);
spin_unlock_irq(&kvm->irqfds.lock);
{
int r = -EINVAL;
int delta;
+ unsigned max_pin;
struct kvm_kernel_irq_routing_entry *ei;
struct hlist_node *n;
switch (ue->u.irqchip.irqchip) {
case KVM_IRQCHIP_PIC_MASTER:
e->set = kvm_set_pic_irq;
+ max_pin = 16;
break;
case KVM_IRQCHIP_PIC_SLAVE:
e->set = kvm_set_pic_irq;
+ max_pin = 16;
delta = 8;
break;
case KVM_IRQCHIP_IOAPIC:
+ max_pin = KVM_IOAPIC_NUM_PINS;
e->set = kvm_set_ioapic_irq;
break;
default:
}
e->irqchip.irqchip = ue->u.irqchip.irqchip;
e->irqchip.pin = ue->u.irqchip.pin + delta;
- if (e->irqchip.pin >= KVM_IOAPIC_NUM_PINS)
+ if (e->irqchip.pin >= max_pin)
goto out;
rt->chip[ue->u.irqchip.irqchip][e->irqchip.pin] = ue->gsi;
break;
/*
* Ordering of locks:
*
- * kvm->slots_lock --> kvm->lock --> kvm->irq_lock
+ * kvm->lock --> kvm->slots_lock --> kvm->irq_lock
*/
DEFINE_SPINLOCK(kvm_lock);
out:
return kvm;
+#if defined(KVM_COALESCED_MMIO_PAGE_OFFSET) || \
+ (defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER))
out_err:
hardware_disable_all();
+#endif
out_err_nodisable:
kfree(kvm);
return ERR_PTR(r);
projects / cascardo / linux.git / commitdiff