arm64: tegra: use tegra132-soctherm for Tegra132

The Tegra132 has the specific settings for soctherm,
so change to use campatible "nvidia,tegra132-soctherm" for it.
And adds cpu, gpu, mem and pllx thermal zones.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 2013f89..e41d8e8 100644 (file)
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
        compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -727,8 +728,8 @@
        };
 
        soctherm: thermal-sensor@700e2000 {
-               compatible = "nvidia,tegra124-soctherm";
-               reg = <0x0 0x700e2000 0x0 0x1000>;
+               compatible = "nvidia,tegra132-soctherm";
+               reg = <0x0 0x700e2000 0x0 0x600>;
                interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
                        <&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -738,6 +739,37 @@
                #thermal-sensor-cells = <1>;
        };
 
+       thermal-zones {
+               cpu {
+                       polling-delay-passive = <1000>;
+                       polling-delay = <0>;
+
+                       thermal-sensors =
+                               <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+               };
+               mem {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors =
+                               <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+               };
+               gpu {
+                       polling-delay-passive = <1000>;
+                       polling-delay = <0>;
+
+                       thermal-sensors =
+                               <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+               };
+               pllx {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors =
+                               <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+               };
+       };
+
        ahub@70300000 {
                compatible = "nvidia,tegra124-ahub";
                reg = <0x0 0x70300000 0x0 0x200>,