P: Person (obsolete)
M: Mail patches to: FullName <address@domain>
+ R: Designated reviewer: FullName <address@domain>
+ These reviewers should be CCed on patches.
L: Mailing list that is relevant to this area
W: Web-page with status/info
Q: Patchwork web based patch tracking system site
S: Maintained
F: drivers/scsi/53c700*
+6LOWPAN GENERIC (BTLE/IEEE 802.15.4)
+M: Alexander Aring <alex.aring@gmail.com>
+L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
+L: linux-bluetooth@vger.kernel.org
+S: Maintained
+F: net/6lowpan/
+F: include/net/6lowpan.h
+
6PACK NETWORK DRIVER FOR AX.25
M: Andreas Koensgen <ajk@comnets.uni-bremen.de>
L: linux-hams@vger.kernel.org
8169 10/100/1000 GIGABIT ETHERNET DRIVER
M: Realtek linux nic maintainers <nic_swsd@realtek.com>
-M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
F: fs/aio.c
F: include/linux/*aio*.h
+AIRSPY MEDIA DRIVER
+M: Antti Palosaari <crope@iki.fi>
+L: linux-media@vger.kernel.org
+W: http://linuxtv.org/
+W: http://palosaari.fi/linux/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/anttip/media_tree.git
+S: Maintained
+F: drivers/media/usb/airspy/
+
ALCATEL SPEEDTOUCH USB DRIVER
M: Duncan Sands <duncan.sands@free.fr>
L: linux-usb@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/
+F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
-ARM/FREESCALE MXS ARM ARCHITECTURE
-M: Shawn Guo <shawn.guo@linaro.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F: arch/arm/mach-mxs/
-
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-pxa/include/mach/hx4700.h
F: sound/soc/pxa/hx4700.c
+ARM/HISILICON SOC SUPPORT
+M: Wei Xu <xuwei5@hisilicon.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.hisilicon.com
+S: Supported
+T: git git://github.com/hisilicon/linux-hisi.git
+F: arch/arm/mach-hisi/
+
ARM/HP JORNADA 7XX MACHINE SUPPORT
M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
W: www.jlime.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
-F: drivers/clk/keystone/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
+M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/clk/keystone/
+
+ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
+M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/clocksource/timer-keystone.c
+
+ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
+M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/power/reset/keystone-reset.c
+
+ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
+M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/memory/*emif*
+
ARM/LOGICPD PXA270 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-berlin/
-ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support
+ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
-F: arch/arm/mach-kirkwood/
F: arch/arm/mach-mv78xx0/
F: arch/arm/mach-orion5x/
F: arch/arm/plat-orion/
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
+F: arch/arm/boot/dts/emev2*
+F: arch/arm/boot/dts/r7s*
+F: arch/arm/boot/dts/r8a*
+F: arch/arm/boot/dts/sh*
+F: arch/arm/configs/ape6evm_defconfig
+F: arch/arm/configs/armadillo800eva_defconfig
+F: arch/arm/configs/bockw_defconfig
+F: arch/arm/configs/genmai_defconfig
+F: arch/arm/configs/koelsch_defconfig
+F: arch/arm/configs/kzm9g_defconfig
+F: arch/arm/configs/lager_defconfig
+F: arch/arm/configs/mackerel_defconfig
+F: arch/arm/configs/marzen_defconfig
+F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
F: drivers/media/rc/st_rc.c
F: drivers/i2c/busses/i2c-st.c
F: drivers/tty/serial/st-asc.c
+F: drivers/mmc/host/sdhci-st.c
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
S: Maintained:
F: drivers/md/bcache/
+BECEEM BCS200/BCS220-3/BCSM250 WIMAX SUPPORT
+M: Kevin McKinney <klmckinney1@gmail.com>
+M: Matthias Beyer <mail@beyermatthias.de>
+L: devel@driverdev.osuosl.org
+S: Maintained
+F: drivers/staging/bcm*
+
BEFS FILE SYSTEM
S: Orphan
F: Documentation/filesystems/befs.txt
F: drivers/net/bonding/
F: include/uapi/linux/if_bonding.h
+BPF (Safe dynamic programs and tools)
+M: Alexei Starovoitov <ast@kernel.org>
+L: netdev@vger.kernel.org
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: kernel/bpf/
+
BROADCOM B44 10/100 ETHERNET DRIVER
M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org
F: drivers/net/ethernet/broadcom/genet/
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M: Michael Chan <mchan@broadcom.com>
+M: Sony Chacko <sony.chacko@qlogic.com>
+M: Dept-HSGLinuxNICDev@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/bnx2.*
F: arch/arm/boot/dts/bcm5301x.dtsi
F: arch/arm/boot/dts/bcm470*
+BROADCOM BCM7XXX ARM ARCHITECTURE
+M: Marc Carino <marc.ceeeee@gmail.com>
+M: Brian Norris <computersforpeace@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-bcm/*brcmstb*
+F: arch/arm/boot/dts/bcm7*.dts*
+
BROADCOM TG3 GIGABIT ETHERNET DRIVER
-M: Nithin Nayak Sujir <nsujir@broadcom.com>
+M: Prashant Sreedharan <prashant@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/wireless/brcm80211/
BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
-M: Eddie Wai <eddie.wai@broadcom.com>
+M: QLogic-Storage-Upstream@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/bnx2fc/
BROADCOM BNX2I 1/10 GIGABIT iSCSI DRIVER
-M: Eddie Wai <eddie.wai@broadcom.com>
+M: QLogic-Storage-Upstream@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/bnx2i/
F: arch/x86/kernel/msr.c
CPU POWER MONITORING SUBSYSTEM
-M: Dominik Brodowski <linux@dominikbrodowski.net>
M: Thomas Renninger <trenn@suse.de>
+L: linux-pm@vger.kernel.org
S: Maintained
F: tools/power/cpupower/
DIGI EPCA PCI PRODUCTS
M: Lidza Louina <lidza.louina@gmail.com>
M: Mark Hounschell <markh@compro.net>
+M: Daeseok Youn <daeseok.youn@gmail.com>
L: driverdev-devel@linuxdriverproject.org
S: Maintained
F: drivers/staging/dgap/
L: linux-media@vger.kernel.org
L: dri-devel@lists.freedesktop.org
L: linaro-mm-sig@lists.linaro.org
-F: drivers/base/dma-buf*
-F: include/linux/dma-buf*
+F: drivers/dma-buf/
+F: include/linux/dma-buf* include/linux/reservation.h include/linux/*fence.h
F: Documentation/dma-buf-sharing.txt
T: git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git
S: Maintained
F: drivers/edac/i82975x_edac.c
+EDAC-IE31200
+M: Jason Baron <jbaron@akamai.com>
+L: linux-edac@vger.kernel.org
+W: bluesmoke.sourceforge.net
+S: Maintained
+F: drivers/edac/ie31200_edac.c
+
EDAC-MPC85XX
M: Johannes Thumshirn <johannes.thumshirn@men.de>
L: linux-edac@vger.kernel.org
F: drivers/isdn/gigaset/
F: include/uapi/linux/gigaset_dev.h
+GO7007 MPEG CODEC
+M: Hans Verkuil <hans.verkuil@cisco.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/usb/go7007/
+
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
M: Alexandre Courbot <gnurou@gmail.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Maintained
F: Documentation/timers/
-F: kernel/hrtimer.c
+F: kernel/time/hrtimer.c
F: kernel/time/clockevents.c
F: kernel/time/tick*.*
F: kernel/time/timer_*.c
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
-M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
-M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Alexander Aring <alex.aring@gmail.com>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
F: Documentation/hwmon/k8temp
F: drivers/hwmon/k8temp.c
-KTAP
-M: Jovi Zhangwei <jovi.zhangwei@gmail.com>
-W: http://www.ktap.org
-L: ktap@freelists.org
-S: Maintained
-F: drivers/staging/ktap/
-
KCONFIG
M: "Yann E. MORIN" <yann.morin.1998@free.fr>
L: linux-kbuild@vger.kernel.org
LINUX FOR POWERPC (32-BIT AND 64-BIT)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
M: Paul Mackerras <paulus@samba.org>
+M: Michael Ellerman <mpe@ellerman.id.au>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
Q: http://patchwork.ozlabs.org/project/linuxppc-dev/list/
LINUX FOR POWERPC EMBEDDED PPC8XX
M: Vitaly Bordug <vitb@kernel.crashing.org>
-M: Marcelo Tosatti <marcelo@kvack.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: arch/powerpc/platforms/8xx/
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
+M: Scott Wood <scottwood@freescale.com>
M: Kumar Gala <galak@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
S: Maintained
F: arch/powerpc/platforms/83xx/
F: arch/powerpc/platforms/85xx/
F: arch/arm/mach-lpc32xx/
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-M: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
-M: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
-M: support@lsi.com
-L: DL-MPTFusionLinux@lsi.com
+M: Nagalakshmi Nandigama <nagalakshmi.nandigama@avagotech.com>
+M: Praveen Krishnamoorthy <praveen.krishnamoorthy@avagotech.com>
+M: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
+M: Abhijit Mahajan <abhijit.mahajan@avagotech.com>
+L: MPT-FusionLinux.pdl@avagotech.com
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
F: include/net/mac80211.h
F: net/mac80211/
-MAC80211 PID RATE CONTROL
-M: Stefano Brivio <stefano.brivio@polimi.it>
-M: Mattias Nissler <mattias.nissler@gmx.de>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
-S: Maintained
-F: net/mac80211/rc80211_pid*
-
MACVLAN DRIVER
M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
F: drivers/net/ethernet/marvell/mvneta.*
MARVELL MWIFIEX WIRELESS DRIVER
-M: Bing Zhao <bzhao@marvell.com>
+M: Amitkumar Karwar <akarwar@marvell.com>
+M: Avinash Patil <patila@marvell.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/mwifiex/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
-F: drivers/staging/media/msi3101/msi001*
+F: drivers/media/tuners/msi001*
-MSI3101 MEDIA DRIVER
+MSI2500 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
-F: drivers/staging/media/msi3101/sdr-msi3101*
+F: drivers/media/usb/msi2500/
MT9M032 APTINA SENSOR DRIVER
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
MULTIFUNCTION DEVICES (MFD)
M: Samuel Ortiz <sameo@linux.intel.com>
M: Lee Jones <lee.jones@linaro.org>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
S: Supported
F: drivers/mfd/
F: include/linux/mfd/
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-OMAP IMAGE SIGNAL PROCESSOR (ISP)
+OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/platform/omap3isp/
+F: drivers/staging/media/omap4iss/
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
-M: Shawn Guo <shawn.guo@linaro.org>
+M: Shawn Guo <shawn.guo@freescale.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/host/pci-host-generic.c
+ PCIE DRIVER FOR ST SPEAR13XX
+ M: Mohit Kumar <mohit.kumar@st.com>
+ L: linux-pci@vger.kernel.org
+ S: Maintained
+ F: drivers/pci/host/*spear*
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
S: Maintained
F: drivers/pinctrl/pinctrl-at91.c
+PIN CONTROLLER - RENESAS
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: linux-sh@vger.kernel.org
+S: Maintained
+F: drivers/pinctrl/sh-pfc/
+
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <t.figa@samsung.com>
M: Thomas Abraham <thomas.abraham@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
-S: Supported
+S: Maintained
F: fs/timerfd.c
F: include/linux/timer*
-F: kernel/*timer*
+F: kernel/time/*timer*
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
+M: Sebastian Reichel <sre@kernel.org>
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: David Woodhouse <dwmw2@infradead.org>
+L: linux-pm@vger.kernel.org
T: git git://git.infradead.org/battery-2.6.git
S: Maintained
F: include/linux/power_supply.h
L: rtc-linux@googlegroups.com
S: Maintained
+QAT DRIVER
+M: Tadeusz Struk <tadeusz.struk@intel.com>
+L: qat-linux@intel.com
+S: Supported
+F: drivers/crypto/qat/
+
QIB DRIVER
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
F: drivers/net/wireless/ray*
RCUTORTURE MODULE
-M: Josh Triplett <josh@freedesktop.org>
+M: Josh Triplett <josh@joshtriplett.org>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
L: linux-kernel@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
F: Documentation/RCU/torture.txt
-F: kernel/rcu/torture.c
+F: kernel/rcu/rcutorture.c
RCUTORTURE TEST FRAMEWORK
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
+M: Josh Triplett <josh@joshtriplett.org>
+R: Steven Rostedt <rostedt@goodmis.org>
+R: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+R: Lai Jiangshan <laijs@cn.fujitsu.com>
L: linux-kernel@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
F: net/rds/
READ-COPY UPDATE (RCU)
-M: Dipankar Sarma <dipankar@in.ibm.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
+M: Josh Triplett <josh@joshtriplett.org>
+R: Steven Rostedt <rostedt@goodmis.org>
+R: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+R: Lai Jiangshan <laijs@cn.fujitsu.com>
L: linux-kernel@vger.kernel.org
W: http://www.rdrop.com/users/paulmck/RCU/
S: Supported
F: include/linux/rcu*
X: include/linux/srcu.h
F: kernel/rcu/
-X: kernel/rcu/torture.c
+X: kernel/torture.c
REAL TIME CLOCK (RTC) SUBSYSTEM
M: Alessandro Zummo <a.zummo@towertech.it>
F: include/linux/rtc.h
F: include/uapi/linux/rtc.h
+REALTEK AUDIO CODECS
+M: Bard Liao <bardliao@realtek.com>
+M: Oder Chiou <oder_chiou@realtek.com>
+S: Maintained
+F: sound/soc/codecs/rt*
+F: include/sound/rt*.h
+
REISERFS FILE SYSTEM
L: reiserfs-devel@vger.kernel.org
S: Supported
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
-F: drivers/staging/media/rtl2832u_sdr/rtl2832_sdr*
+F: drivers/media/dvb-frontends/rtl2832_sdr*
RTL8180 WIRELESS DRIVER
M: "John W. Linville" <linville@tuxdriver.com>
F: include/linux/mmc/dw_mmc.h
F: drivers/mmc/host/dw_mmc*
+THUNDERBOLT DRIVER
+M: Andreas Noever <andreas.noever@gmail.com>
+S: Maintained
+F: drivers/thunderbolt/
+
TIMEKEEPING, CLOCKSOURCE CORE, NTP
M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
F: drivers/mmc/host/sdhci.*
F: drivers/mmc/host/sdhci-pltfm.[ch]
+SECURE COMPUTING
+M: Kees Cook <keescook@chromium.org>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp
+S: Supported
+F: kernel/seccomp.c
+F: include/uapi/linux/seccomp.h
+F: include/linux/seccomp.h
+K: \bsecure_computing
+K: \bTIF_SECCOMP\b
+
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
M: Anton Vorontsov <anton@enomsg.org>
L: linuxppc-dev@lists.ozlabs.org
F: include/linux/ata.h
F: include/linux/libata.h
+SERIAL ATA AHCI PLATFORM devices support
+M: Hans de Goede <hdegoede@redhat.com>
+M: Tejun Heo <tj@kernel.org>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Supported
+F: drivers/ata/ahci_platform.c
+F: drivers/ata/libahci_platform.c
+F: include/linux/ahci_platform.h
+
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
SLEEPABLE READ-COPY UPDATE (SRCU)
M: Lai Jiangshan <laijs@cn.fujitsu.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
+M: Josh Triplett <josh@joshtriplett.org>
+R: Steven Rostedt <rostedt@goodmis.org>
+R: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
L: linux-kernel@vger.kernel.org
W: http://www.rdrop.com/users/paulmck/RCU/
S: Supported
S: Maintained
F: drivers/leds/leds-net48xx.c
+SOFTLOGIC 6x10 MPEG CODEC
+M: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
+L: linux-media@vger.kernel.org
+S: Supported
+F: drivers/media/pci/solo6x10/
+
SOFTWARE RAID (Multiple Disks) SUPPORT
M: Neil Brown <neilb@suse.de>
L: linux-raid@vger.kernel.org
S: Supported
F: drivers/staging/
-STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
-M: Henk de Groot <pe1dnn@amsat.org>
-S: Odd Fixes
-F: drivers/staging/wlags49_h2/
-F: drivers/staging/wlags49_h25/
-
-STAGING - ASUS OLED
-M: Jakub Schmidtke <sjakub@gmail.com>
-S: Odd Fixes
-F: drivers/staging/asus_oled/
-
STAGING - COMEDI
M: Ian Abbott <abbotti@mev.co.uk>
M: H Hartley Sweeten <hsweeten@visionengravers.com>
S: Odd Fixes
F: drivers/staging/comedi/
-STAGING - CRYSTAL HD VIDEO DECODER
-M: Naren Sankar <nsankar@broadcom.com>
-M: Jarod Wilson <jarod@wilsonet.com>
-M: Scott Davilla <davilla@4pi.com>
-M: Manu Abraham <abraham.manu@gmail.com>
-S: Odd Fixes
-F: drivers/staging/crystalhd/
-
-STAGING - ECHO CANCELLER
-M: Steve Underwood <steveu@coppice.org>
-M: David Rowe <david@rowetel.com>
-S: Odd Fixes
-F: drivers/staging/echo/
-
STAGING - ET131X NETWORK DRIVER
M: Mark Einon <mark.einon@gmail.com>
S: Odd Fixes
S: Odd Fixes
F: drivers/staging/ft1000/
-STAGING - FRONTIER TRANZPORT AND ALPHATRACK
-M: David Täht <d@teklibre.com>
-S: Odd Fixes
-F: drivers/staging/frontier/
-
-STAGING - GO7007 MPEG CODEC
-M: Hans Verkuil <hans.verkuil@cisco.com>
-S: Maintained
-F: drivers/staging/media/go7007/
-
STAGING - INDUSTRIAL IO
M: Jonathan Cameron <jic23@kernel.org>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/staging/rtl8723au/
-STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER
-M: Teddy Wang <teddy.wang@siliconmotion.com.cn>
-S: Odd Fixes
-F: drivers/staging/sm7xxfb/
-
STAGING - SLICOSS
M: Lior Dotan <liodot@gmail.com>
M: Christopher Harrer <charrer@alacritech.com>
S: Odd Fixes
F: drivers/staging/slicoss/
-STAGING - SOFTLOGIC 6x10 MPEG CODEC
-M: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
-S: Supported
-F: drivers/staging/media/solo6x10/
-
STAGING - SPEAKUP CONSOLE SPEECH DRIVER
M: William Hubbs <w.d.hubbs@gmail.com>
M: Chris Brannon <chris@the-brannons.com>
M: Kirk Reiser <kirk@reisers.ca>
M: Samuel Thibault <samuel.thibault@ens-lyon.org>
-L: speakup@braille.uwo.ca
+L: speakup@linux-speakup.org
W: http://www.linux-speakup.org/
S: Odd Fixes
F: drivers/staging/speakup/
-STAGING - TI DSP BRIDGE DRIVERS
-M: Omar Ramirez Luna <omar.ramirez@copitl.com>
-S: Odd Fixes
-F: drivers/staging/tidspbridge/
-
-STAGING - USB ENE SM/MS CARD READER DRIVER
-M: Al Cho <acho@novell.com>
-S: Odd Fixes
-F: drivers/staging/keucr/
-
STAGING - VIA VT665X DRIVERS
M: Forest Bond <forest@alittletooquiet.net>
S: Odd Fixes
F: drivers/staging/vt665?/
-STAGING - WINBOND IS89C35 WLAN USB DRIVER
-M: Pavel Machek <pavel@ucw.cz>
-S: Odd Fixes
-F: drivers/staging/winbond/
-
STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER
M: Arnaud Patard <arnaud.patard@rtp-net.org>
S: Odd Fixes
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
Q: http://patchwork.ozlabs.org/project/linux-tegra/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
S: Supported
N: [^a-z]tegra
THERMAL
M: Zhang Rui <rui.zhang@intel.com>
-M: Eduardo Valentin <eduardo.valentin@ti.com>
+M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
-M: Eduardo Valentin <eduardo.valentin@ti.com>
+M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/thermal/ti-soc-thermal/
+TI CLOCK DRIVER
+M: Tero Kristo <t-kristo@ti.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/clk/ti/
+F: include/linux/clk/ti.h
+
TI FLASH MEDIA INTERFACE DRIVER
M: Alex Dubov <oakad@yahoo.com>
S: Maintained
F: drivers/usb/host/isp116x*
F: include/linux/usb/isp116x.h
-USB KAWASAKI LSI DRIVER
-M: Oliver Neukum <oliver@neukum.org>
-L: linux-usb@vger.kernel.org
-S: Maintained
-F: drivers/usb/serial/kl5kusb105.*
-
USB MASS STORAGE DRIVER
M: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
L: linux-usb@vger.kernel.org
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
-USB OPTION-CARD DRIVER
-M: Matthias Urlichs <smurf@smurf.noris.de>
-L: linux-usb@vger.kernel.org
-S: Maintained
-F: drivers/usb/serial/option.c
-
USB PEGASUS DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
F: drivers/net/usb/rtl8150.c
USB SERIAL SUBSYSTEM
-M: Johan Hovold <jhovold@gmail.com>
+M: Johan Hovold <johan@kernel.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/usb/usb-serial.txt
S: Maintained
F: drivers/net/usb/smsc95xx.*
-USB SN9C1xx DRIVER
-M: Luca Risolia <luca.risolia@studio.unibo.it>
-L: linux-usb@vger.kernel.org
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-W: http://www.linux-projects.org
-S: Maintained
-F: drivers/staging/media/sn9c102/
-
USB SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
F: arch/x86/pci/*xen*
F: drivers/pci/*xen*
+XEN BLOCK SUBSYSTEM
+M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
+S: Supported
+F: drivers/block/xen-blkback/*
+F: drivers/block/xen*
+
XEN SWIOTLB SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
#gpio-cells = <2>;
gpio-controller;
+ /* vdd_5v0_reg must be provided by the base board */
sys-supply = <&vdd_5v0_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
};
pcie-controller@80003000 {
- pex-clk-supply = <&pci_clk_reg>;
- vdd-supply = <&pci_vdd_reg>;
+ avdd-pex-supply = <&pci_vdd_reg>;
+ vdd-pex-supply = <&pci_vdd_reg>;
+ avdd-pex-pll-supply = <&pci_vdd_reg>;
+ avdd-plle-supply = <&pci_vdd_reg>;
+ vddio-pex-clk-supply = <&pci_clk_reg>;
};
usb@c5008000 {
#address-cells = <1>;
#size-cells = <0>;
- vdd_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
pci_vdd_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91sam9263_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9g45_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
/*
* Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL
- * 0xB3000000 0xFE000000
+ * 0xB3000000 0xF9000000
* 0xE0000000 0xFD000000
* 0xEC000000 0xFC000000
* 0xED000000 0xFB000000
*/
-struct map_desc spear13xx_io_desc[] __initdata = {
+static struct map_desc spear13xx_io_desc[] __initdata = {
{
.virtual = (unsigned long)VA_PERIP_GRP2_BASE,
.pfn = __phys_to_pfn(PERIP_GRP2_BASE),
This option enables support for on-chip LED drivers found on Marvell
Semiconductor 88PM8606 PMIC.
- config LEDS_ATMEL_PWM
- tristate "LED Support using Atmel PWM outputs"
- depends on LEDS_CLASS
- depends on ATMEL_PWM
- help
- This option enables support for LEDs driven using outputs
- of the dedicated PWM controller found on newer Atmel SOCs.
-
config LEDS_LM3530
tristate "LCD Backlight driver for LM3530"
depends on LEDS_CLASS
This option enables support for the Left, Middle, and Right
LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
+config LEDS_IPAQ_MICRO
+ tristate "LED Support for the Compaq iPAQ h3xxx"
+ depends on MFD_IPAQ_MICRO
+ help
+ Choose this option if you want to use the notification LED on
+ Compaq/HP iPAQ h3100 and h3600.
+
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
depends on LEDS_CLASS
# LED Platform Drivers
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
- obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
+obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
-#include <linux/tegra-cpuidle.h>
-#include <linux/tegra-powergate.h>
#include <linux/vmalloc.h>
#include <linux/regulator/consumer.h>
+#include <soc/tegra/cpuidle.h>
+#include <soc/tegra/pmc.h>
+
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
bool has_pex_clkreq_en;
bool has_pex_bias_ctrl;
bool has_intr_prsnt_sense;
- bool has_avdd_supply;
bool has_cml_clk;
};
unsigned int num_ports;
u32 xbar_config;
- struct regulator *pex_clk_supply;
- struct regulator *vdd_supply;
- struct regulator *avdd_supply;
+ struct regulator_bulk_data *supplies;
+ unsigned int num_supplies;
const struct tegra_pcie_soc_data *soc_data;
};
static void tegra_pcie_power_off(struct tegra_pcie *pcie)
{
- const struct tegra_pcie_soc_data *soc = pcie->soc_data;
int err;
/* TODO: disable and unprepare clocks? */
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
- if (soc->has_avdd_supply) {
- err = regulator_disable(pcie->avdd_supply);
- if (err < 0)
- dev_warn(pcie->dev,
- "failed to disable AVDD regulator: %d\n",
- err);
- }
-
- err = regulator_disable(pcie->pex_clk_supply);
+ err = regulator_bulk_disable(pcie->num_supplies, pcie->supplies);
if (err < 0)
- dev_warn(pcie->dev, "failed to disable pex-clk regulator: %d\n",
- err);
-
- err = regulator_disable(pcie->vdd_supply);
- if (err < 0)
- dev_warn(pcie->dev, "failed to disable VDD regulator: %d\n",
- err);
+ dev_warn(pcie->dev, "failed to disable regulators: %d\n", err);
}
static int tegra_pcie_power_on(struct tegra_pcie *pcie)
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
/* enable regulators */
- err = regulator_enable(pcie->vdd_supply);
- if (err < 0) {
- dev_err(pcie->dev, "failed to enable VDD regulator: %d\n", err);
- return err;
- }
-
- err = regulator_enable(pcie->pex_clk_supply);
- if (err < 0) {
- dev_err(pcie->dev, "failed to enable pex-clk regulator: %d\n",
- err);
- return err;
- }
-
- if (soc->has_avdd_supply) {
- err = regulator_enable(pcie->avdd_supply);
- if (err < 0) {
- dev_err(pcie->dev,
- "failed to enable AVDD regulator: %d\n",
- err);
- return err;
- }
- }
+ err = regulator_bulk_enable(pcie->num_supplies, pcie->supplies);
+ if (err < 0)
+ dev_err(pcie->dev, "failed to enable regulators: %d\n", err);
err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
pcie->pex_clk,
return -EINVAL;
}
+ /*
+ * Check whether a given set of supplies is available in a device tree node.
+ * This is used to check whether the new or the legacy device tree bindings
+ * should be used.
+ */
+ static bool of_regulator_bulk_available(struct device_node *np,
+ struct regulator_bulk_data *supplies,
+ unsigned int num_supplies)
+ {
+ char property[32];
+ unsigned int i;
+
+ for (i = 0; i < num_supplies; i++) {
+ snprintf(property, 32, "%s-supply", supplies[i].supply);
+
+ if (of_find_property(np, property, NULL) == NULL)
+ return false;
+ }
+
+ return true;
+ }
+
+ /*
+ * Old versions of the device tree binding for this device used a set of power
+ * supplies that didn't match the hardware inputs. This happened to work for a
+ * number of cases but is not future proof. However to preserve backwards-
+ * compatibility with old device trees, this function will try to use the old
+ * set of supplies.
+ */
+ static int tegra_pcie_get_legacy_regulators(struct tegra_pcie *pcie)
+ {
+ struct device_node *np = pcie->dev->of_node;
+
+ if (of_device_is_compatible(np, "nvidia,tegra30-pcie"))
+ pcie->num_supplies = 3;
+ else if (of_device_is_compatible(np, "nvidia,tegra20-pcie"))
+ pcie->num_supplies = 2;
+
+ if (pcie->num_supplies == 0) {
+ dev_err(pcie->dev, "device %s not supported in legacy mode\n",
+ np->full_name);
+ return -ENODEV;
+ }
+
+ pcie->supplies = devm_kcalloc(pcie->dev, pcie->num_supplies,
+ sizeof(*pcie->supplies),
+ GFP_KERNEL);
+ if (!pcie->supplies)
+ return -ENOMEM;
+
+ pcie->supplies[0].supply = "pex-clk";
+ pcie->supplies[1].supply = "vdd";
+
+ if (pcie->num_supplies > 2)
+ pcie->supplies[2].supply = "avdd";
+
+ return devm_regulator_bulk_get(pcie->dev, pcie->num_supplies,
+ pcie->supplies);
+ }
+
+ /*
+ * Obtains the list of regulators required for a particular generation of the
+ * IP block.
+ *
+ * This would've been nice to do simply by providing static tables for use
+ * with the regulator_bulk_*() API, but unfortunately Tegra30 is a bit quirky
+ * in that it has two pairs or AVDD_PEX and VDD_PEX supplies (PEXA and PEXB)
+ * and either seems to be optional depending on which ports are being used.
+ */
+ static int tegra_pcie_get_regulators(struct tegra_pcie *pcie, u32 lane_mask)
+ {
+ struct device_node *np = pcie->dev->of_node;
+ unsigned int i = 0;
+
+ if (of_device_is_compatible(np, "nvidia,tegra30-pcie")) {
+ bool need_pexa = false, need_pexb = false;
+
+ /* VDD_PEXA and AVDD_PEXA supply lanes 0 to 3 */
+ if (lane_mask & 0x0f)
+ need_pexa = true;
+
+ /* VDD_PEXB and AVDD_PEXB supply lanes 4 to 5 */
+ if (lane_mask & 0x30)
+ need_pexb = true;
+
+ pcie->num_supplies = 4 + (need_pexa ? 2 : 0) +
+ (need_pexb ? 2 : 0);
+
+ pcie->supplies = devm_kcalloc(pcie->dev, pcie->num_supplies,
+ sizeof(*pcie->supplies),
+ GFP_KERNEL);
+ if (!pcie->supplies)
+ return -ENOMEM;
+
+ pcie->supplies[i++].supply = "avdd-pex-pll";
+ pcie->supplies[i++].supply = "hvdd-pex";
+ pcie->supplies[i++].supply = "vddio-pex-ctl";
+ pcie->supplies[i++].supply = "avdd-plle";
+
+ if (need_pexa) {
+ pcie->supplies[i++].supply = "avdd-pexa";
+ pcie->supplies[i++].supply = "vdd-pexa";
+ }
+
+ if (need_pexb) {
+ pcie->supplies[i++].supply = "avdd-pexb";
+ pcie->supplies[i++].supply = "vdd-pexb";
+ }
+ } else if (of_device_is_compatible(np, "nvidia,tegra20-pcie")) {
+ pcie->num_supplies = 5;
+
+ pcie->supplies = devm_kcalloc(pcie->dev, pcie->num_supplies,
+ sizeof(*pcie->supplies),
+ GFP_KERNEL);
+ if (!pcie->supplies)
+ return -ENOMEM;
+
+ pcie->supplies[0].supply = "avdd-pex";
+ pcie->supplies[1].supply = "vdd-pex";
+ pcie->supplies[2].supply = "avdd-pex-pll";
+ pcie->supplies[3].supply = "avdd-plle";
+ pcie->supplies[4].supply = "vddio-pex-clk";
+ }
+
+ if (of_regulator_bulk_available(pcie->dev->of_node, pcie->supplies,
+ pcie->num_supplies))
+ return devm_regulator_bulk_get(pcie->dev, pcie->num_supplies,
+ pcie->supplies);
+
+ /*
+ * If not all regulators are available for this new scheme, assume
+ * that the device tree complies with an older version of the device
+ * tree binding.
+ */
+ dev_info(pcie->dev, "using legacy DT binding for power supplies\n");
+
+ devm_kfree(pcie->dev, pcie->supplies);
+ pcie->num_supplies = 0;
+
+ return tegra_pcie_get_legacy_regulators(pcie);
+ }
+
static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
{
const struct tegra_pcie_soc_data *soc = pcie->soc_data;
struct device_node *np = pcie->dev->of_node, *port;
struct of_pci_range_parser parser;
struct of_pci_range range;
+ u32 lanes = 0, mask = 0;
+ unsigned int lane = 0;
struct resource res;
- u32 lanes = 0;
int err;
if (of_pci_range_parser_init(&parser, np)) {
return -EINVAL;
}
- pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd");
- if (IS_ERR(pcie->vdd_supply))
- return PTR_ERR(pcie->vdd_supply);
-
- pcie->pex_clk_supply = devm_regulator_get(pcie->dev, "pex-clk");
- if (IS_ERR(pcie->pex_clk_supply))
- return PTR_ERR(pcie->pex_clk_supply);
-
- if (soc->has_avdd_supply) {
- pcie->avdd_supply = devm_regulator_get(pcie->dev, "avdd");
- if (IS_ERR(pcie->avdd_supply))
- return PTR_ERR(pcie->avdd_supply);
- }
-
for_each_of_pci_range(&parser, &range) {
of_pci_range_to_resource(&range, np, &res);
lanes |= value << (index << 3);
- if (!of_device_is_available(port))
+ if (!of_device_is_available(port)) {
+ lane += value;
continue;
+ }
+
+ mask |= ((1 << value) - 1) << lane;
+ lane += value;
rp = devm_kzalloc(pcie->dev, sizeof(*rp), GFP_KERNEL);
if (!rp)
return err;
}
+ err = tegra_pcie_get_regulators(pcie, mask);
+ if (err < 0)
+ return err;
+
return 0;
}
.has_pex_clkreq_en = false,
.has_pex_bias_ctrl = false,
.has_intr_prsnt_sense = false,
- .has_avdd_supply = false,
.has_cml_clk = false,
};
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_avdd_supply = true,
.has_cml_clk = true,
};
MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
MODULE_DESCRIPTION("NVIDIA Tegra PCIe driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
+config PHY_BERLIN_SATA
+ tristate "Marvell Berlin SATA PHY driver"
+ depends on ARCH_BERLIN && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
config PHY_EXYNOS_MIPI_VIDEO
tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
depends on HAS_IOMEM
config PHY_MVEBU_SATA
def_bool y
- depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+ depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
depends on OF
select GENERIC_PHY
+config PHY_MIPHY365X
+ tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
+ depends on ARCH_STI
+ depends on GENERIC_PHY
+ depends on HAS_IOMEM
+ depends on OF
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE)
+ that is part of STMicroelectronics STiH41x SoC series.
+
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
port to accept one SATA device.
+config PHY_HIX5HD2_SATA
+ tristate "HIX5HD2 SATA PHY Driver"
+ depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for SATA PHY on Hisilicon hix5hd2 Soc.
+
config PHY_SUN4I_USB
tristate "Allwinner sunxi SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the transceiver that is part of Allwinner
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
select GENERIC_PHY
select MFD_SYSCON
+ default ARCH_EXYNOS
help
Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support for
- particular SoCs has to be enabled in addition to this driver. Number
- and type of supported phys depends on the SoC.
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
-config PHY_EXYNOS4210_USB2
- bool "Support for Exynos 4210"
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
- depends on CPU_EXYNOS4210
+ depends on ARCH_S5PV210
help
- Enable USB PHY support for Exynos 4210. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 4210 four
- phys are available - device, host, HSIC0 and HSIC1.
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
config PHY_EXYNOS4X12_USB2
- bool "Support for Exynos 4x12"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
- help
- Enable USB PHY support for Exynos 4x12. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 4x12 four
- phys are available - device, host, HSIC0 and HSIC1.
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
config PHY_EXYNOS5250_USB2
- bool "Support for Exynos 5250"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on SOC_EXYNOS5250
- help
- Enable USB PHY support for Exynos 5250. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 5250 four
- phys are available - device, host, HSIC0 and HSIC.
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
depends on ARCH_EXYNOS5 && OF
depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
select GENERIC_PHY
select MFD_SYSCON
+ default y
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
--config PHY_XGENE
-- tristate "APM X-Gene 15Gbps PHY support"
-- depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
- select GENERIC_PHY
- help
- This option enables support for APM X-Gene SoC multi-purpose PHY.
-
+config PHY_QCOM_APQ8064_SATA
+ tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
select GENERIC_PHY
- help
- This option enables support for APM X-Gene SoC multi-purpose PHY.
+ config PHY_ST_SPEAR1310_MIPHY
+ tristate "ST SPEAR1310-MIPHY driver"
+ select GENERIC_PHY
+ help
+ Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+ config PHY_ST_SPEAR1340_MIPHY
+ tristate "ST SPEAR1340-MIPHY driver"
+ select GENERIC_PHY
+ help
+ Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
++config PHY_XGENE
++ tristate "APM X-Gene 15Gbps PHY support"
++ depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
++ select GENERIC_PHY
++ help
++ This option enables support for APM X-Gene SoC multi-purpose PHY.
++
endmenu
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
+obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
+obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
+obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
phy-exynos-usb2-y += phy-samsung-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
--obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
+ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
++obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
--- /dev/null
- priv->phy = devm_phy_create(dev, &spear1310_miphy_ops, NULL);
+ /*
+ * ST SPEAr1310-miphy driver
+ *
+ * Copyright (C) 2014 ST Microelectronics
+ * Pratyush Anand <pratyush.anand@st.com>
+ * Mohit Kumar <mohit.kumar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ #include <linux/bitops.h>
+ #include <linux/delay.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/kernel.h>
+ #include <linux/mfd/syscon.h>
+ #include <linux/module.h>
+ #include <linux/of_device.h>
+ #include <linux/phy/phy.h>
+ #include <linux/regmap.h>
+
+ /* SPEAr1310 Registers */
+ #define SPEAR1310_PCIE_SATA_CFG 0x3A4
+ #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
+ #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
+ #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
+ #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
+ #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
+ #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
+ #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
+ #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
+ #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
+ #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
+ #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
+ #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
+ #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
+ #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
+ #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
+ #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
+ #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
+ #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
+ #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
+ #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
+ #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
+ #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
+ #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
+ #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
+ #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
+ #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
+ #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
+ #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
+ #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
+ #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
+
+ #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
+ #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
+ BIT((x + 29)))
+ #define SPEAR1310_PCIE_CFG_VAL(x) \
+ (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
+ SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
+ SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
+ SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
+ SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
+ #define SPEAR1310_SATA_CFG_VAL(x) \
+ (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
+ SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
+ SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
+ SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
+ SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
+
+ #define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
+ #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
+ #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
+ #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
+ #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
+ #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
+ #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
+ SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
+ SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
+ SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
+ SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
+
+ #define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
+
+ enum spear1310_miphy_mode {
+ SATA,
+ PCIE,
+ };
+
+ struct spear1310_miphy_priv {
+ /* instance id of this phy */
+ u32 id;
+ /* phy mode: 0 for SATA 1 for PCIe */
+ enum spear1310_miphy_mode mode;
+ /* regmap for any soc specific misc registers */
+ struct regmap *misc;
+ /* phy struct pointer */
+ struct phy *phy;
+ };
+
+ static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv)
+ {
+ u32 val;
+
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
+ SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
+ SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
+
+ switch (priv->id) {
+ case 0:
+ val = SPEAR1310_PCIE_CFG_VAL(0);
+ break;
+ case 1:
+ val = SPEAR1310_PCIE_CFG_VAL(1);
+ break;
+ case 2:
+ val = SPEAR1310_PCIE_CFG_VAL(2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
+ SPEAR1310_PCIE_CFG_MASK(priv->id), val);
+
+ return 0;
+ }
+
+ static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv)
+ {
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
+ SPEAR1310_PCIE_CFG_MASK(priv->id), 0);
+
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
+ SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0);
+
+ return 0;
+ }
+
+ static int spear1310_miphy_init(struct phy *phy)
+ {
+ struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ if (priv->mode == PCIE)
+ ret = spear1310_miphy_pcie_init(priv);
+
+ return ret;
+ }
+
+ static int spear1310_miphy_exit(struct phy *phy)
+ {
+ struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ if (priv->mode == PCIE)
+ ret = spear1310_miphy_pcie_exit(priv);
+
+ return ret;
+ }
+
+ static const struct of_device_id spear1310_miphy_of_match[] = {
+ { .compatible = "st,spear1310-miphy" },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match);
+
+ static struct phy_ops spear1310_miphy_ops = {
+ .init = spear1310_miphy_init,
+ .exit = spear1310_miphy_exit,
+ .owner = THIS_MODULE,
+ };
+
+ static struct phy *spear1310_miphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+ {
+ struct spear1310_miphy_priv *priv = dev_get_drvdata(dev);
+
+ if (args->args_count < 1) {
+ dev_err(dev, "DT did not pass correct no of args\n");
+ return NULL;
+ }
+
+ priv->mode = args->args[0];
+
+ if (priv->mode != SATA && priv->mode != PCIE) {
+ dev_err(dev, "DT did not pass correct phy mode\n");
+ return NULL;
+ }
+
+ return priv->phy;
+ }
+
+ static int spear1310_miphy_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+ struct spear1310_miphy_priv *priv;
+ struct phy_provider *phy_provider;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev, "can't alloc spear1310_miphy private date memory\n");
+ return -ENOMEM;
+ }
+
+ priv->misc =
+ syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
+ if (IS_ERR(priv->misc)) {
+ dev_err(dev, "failed to find misc regmap\n");
+ return PTR_ERR(priv->misc);
+ }
+
+ if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) {
+ dev_err(dev, "failed to find phy id\n");
+ return -EINVAL;
+ }
+
++ priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops, NULL);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create SATA PCIe PHY\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ dev_set_drvdata(dev, priv);
+ phy_set_drvdata(priv->phy, priv);
+
+ phy_provider =
+ devm_of_phy_provider_register(dev, spear1310_miphy_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+ }
+
+ static struct platform_driver spear1310_miphy_driver = {
+ .probe = spear1310_miphy_probe,
+ .driver = {
+ .name = "spear1310-miphy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(spear1310_miphy_of_match),
+ },
+ };
+
+ static int __init spear1310_miphy_phy_init(void)
+ {
+ return platform_driver_register(&spear1310_miphy_driver);
+ }
+ module_init(spear1310_miphy_phy_init);
+
+ static void __exit spear1310_miphy_phy_exit(void)
+ {
+ platform_driver_unregister(&spear1310_miphy_driver);
+ }
+ module_exit(spear1310_miphy_phy_exit);
+
+ MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
+ MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+ MODULE_LICENSE("GPL v2");
--- /dev/null
- priv->phy = devm_phy_create(dev, &spear1340_miphy_ops, NULL);
+ /*
+ * ST spear1340-miphy driver
+ *
+ * Copyright (C) 2014 ST Microelectronics
+ * Pratyush Anand <pratyush.anand@st.com>
+ * Mohit Kumar <mohit.kumar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ #include <linux/bitops.h>
+ #include <linux/delay.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/kernel.h>
+ #include <linux/mfd/syscon.h>
+ #include <linux/module.h>
+ #include <linux/of_device.h>
+ #include <linux/phy/phy.h>
+ #include <linux/regmap.h>
+
+ /* SPEAr1340 Registers */
+ /* Power Management Registers */
+ #define SPEAR1340_PCM_CFG 0x100
+ #define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11)
+ #define SPEAR1340_PCM_WKUP_CFG 0x104
+ #define SPEAR1340_SWITCH_CTR 0x108
+
+ #define SPEAR1340_PERIP1_SW_RST 0x318
+ #define SPEAR1340_PERIP1_SW_RSATA BIT(12)
+ #define SPEAR1340_PERIP2_SW_RST 0x31C
+ #define SPEAR1340_PERIP3_SW_RST 0x320
+
+ /* PCIE - SATA configuration registers */
+ #define SPEAR1340_PCIE_SATA_CFG 0x424
+ /* PCIE CFG MASks */
+ #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11)
+ #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10)
+ #define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9)
+ #define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8)
+ #define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4)
+ #define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3)
+ #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2)
+ #define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1)
+ #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
+ #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
+ #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F
+ #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
+ SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+ SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+ SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+ SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+ #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
+ SPEAR1340_SATA_CFG_PM_CLK_EN | \
+ SPEAR1340_SATA_CFG_POWERUP_RESET | \
+ SPEAR1340_SATA_CFG_RX_CLK_EN | \
+ SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+ #define SPEAR1340_PCIE_MIPHY_CFG 0x428
+ #define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
+ #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+ enum spear1340_miphy_mode {
+ SATA,
+ PCIE,
+ };
+
+ struct spear1340_miphy_priv {
+ /* phy mode: 0 for SATA 1 for PCIe */
+ enum spear1340_miphy_mode mode;
+ /* regmap for any soc specific misc registers */
+ struct regmap *misc;
+ /* phy struct pointer */
+ struct phy *phy;
+ };
+
+ static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv)
+ {
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK,
+ SPEAR1340_SATA_CFG_VAL);
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK,
+ SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK);
+ /* Switch on sata power domain */
+ regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
+ SPEAR1340_PCM_CFG_SATA_POWER_EN,
+ SPEAR1340_PCM_CFG_SATA_POWER_EN);
+ /* Wait for SATA power domain on */
+ msleep(20);
+
+ /* Disable PCIE SATA Controller reset */
+ regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
+ SPEAR1340_PERIP1_SW_RSATA, 0);
+ /* Wait for SATA reset de-assert completion */
+ msleep(20);
+
+ return 0;
+ }
+
+ static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv)
+ {
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK, 0);
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
+
+ /* Enable PCIE SATA Controller reset */
+ regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
+ SPEAR1340_PERIP1_SW_RSATA,
+ SPEAR1340_PERIP1_SW_RSATA);
+ /* Wait for SATA power domain off */
+ msleep(20);
+ /* Switch off sata power domain */
+ regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
+ SPEAR1340_PCM_CFG_SATA_POWER_EN, 0);
+ /* Wait for SATA reset assert completion */
+ msleep(20);
+
+ return 0;
+ }
+
+ static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv)
+ {
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK,
+ SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE);
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK,
+ SPEAR1340_PCIE_CFG_VAL);
+
+ return 0;
+ }
+
+ static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv)
+ {
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK, 0);
+
+ return 0;
+ }
+
+ static int spear1340_miphy_init(struct phy *phy)
+ {
+ struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ if (priv->mode == SATA)
+ ret = spear1340_miphy_sata_init(priv);
+ else if (priv->mode == PCIE)
+ ret = spear1340_miphy_pcie_init(priv);
+
+ return ret;
+ }
+
+ static int spear1340_miphy_exit(struct phy *phy)
+ {
+ struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ if (priv->mode == SATA)
+ ret = spear1340_miphy_sata_exit(priv);
+ else if (priv->mode == PCIE)
+ ret = spear1340_miphy_pcie_exit(priv);
+
+ return ret;
+ }
+
+ static const struct of_device_id spear1340_miphy_of_match[] = {
+ { .compatible = "st,spear1340-miphy" },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match);
+
+ static struct phy_ops spear1340_miphy_ops = {
+ .init = spear1340_miphy_init,
+ .exit = spear1340_miphy_exit,
+ .owner = THIS_MODULE,
+ };
+
+ #ifdef CONFIG_PM_SLEEP
+ static int spear1340_miphy_suspend(struct device *dev)
+ {
+ struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (priv->mode == SATA)
+ ret = spear1340_miphy_sata_exit(priv);
+
+ return ret;
+ }
+
+ static int spear1340_miphy_resume(struct device *dev)
+ {
+ struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (priv->mode == SATA)
+ ret = spear1340_miphy_sata_init(priv);
+
+ return ret;
+ }
+ #endif
+
+ static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend,
+ spear1340_miphy_resume);
+
+ static struct phy *spear1340_miphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+ {
+ struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
+
+ if (args->args_count < 1) {
+ dev_err(dev, "DT did not pass correct no of args\n");
+ return NULL;
+ }
+
+ priv->mode = args->args[0];
+
+ if (priv->mode != SATA && priv->mode != PCIE) {
+ dev_err(dev, "DT did not pass correct phy mode\n");
+ return NULL;
+ }
+
+ return priv->phy;
+ }
+
+ static int spear1340_miphy_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+ struct spear1340_miphy_priv *priv;
+ struct phy_provider *phy_provider;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev, "can't alloc spear1340_miphy private date memory\n");
+ return -ENOMEM;
+ }
+
+ priv->misc =
+ syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
+ if (IS_ERR(priv->misc)) {
+ dev_err(dev, "failed to find misc regmap\n");
+ return PTR_ERR(priv->misc);
+ }
+
++ priv->phy = devm_phy_create(dev, NULL, &spear1340_miphy_ops, NULL);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create SATA PCIe PHY\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ dev_set_drvdata(dev, priv);
+ phy_set_drvdata(priv->phy, priv);
+
+ phy_provider =
+ devm_of_phy_provider_register(dev, spear1340_miphy_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+ }
+
+ static struct platform_driver spear1340_miphy_driver = {
+ .probe = spear1340_miphy_probe,
+ .driver = {
+ .name = "spear1340-miphy",
+ .owner = THIS_MODULE,
+ .pm = &spear1340_miphy_pm_ops,
+ .of_match_table = of_match_ptr(spear1340_miphy_of_match),
+ },
+ };
+
+ static int __init spear1340_miphy_phy_init(void)
+ {
+ return platform_driver_register(&spear1340_miphy_driver);
+ }
+ module_init(spear1340_miphy_phy_init);
+
+ static void __exit spear1340_miphy_phy_exit(void)
+ {
+ platform_driver_unregister(&spear1340_miphy_driver);
+ }
+ module_exit(spear1340_miphy_phy_exit);
+
+ MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
+ MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+ MODULE_LICENSE("GPL v2");
--- /dev/null
- phy = devm_phy_create(&pdev->dev, &pcie_phy_ops, NULL);
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+
+#include "core.h"
+#include "pinctrl-utils.h"
+
+#define XUSB_PADCTL_ELPG_PROGRAM 0x01c
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 26)
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 25)
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 24)
+
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1 0x040
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL0_LOCKDET (1 << 19)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_REFCLK_SEL_MASK (0xf << 12)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST (1 << 1)
+
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2 0x044
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_REFCLKBUF_EN (1 << 6)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_EN (1 << 5)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_SEL (1 << 4)
+
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1 0x138
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_LOCKDET (1 << 27)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE (1 << 24)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD (1 << 3)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST (1 << 1)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ (1 << 0)
+
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1 0x148
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD (1 << 1)
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ (1 << 0)
+
+struct tegra_xusb_padctl_function {
+ const char *name;
+ const char * const *groups;
+ unsigned int num_groups;
+};
+
+struct tegra_xusb_padctl_group {
+ const unsigned int *funcs;
+ unsigned int num_funcs;
+};
+
+struct tegra_xusb_padctl_soc {
+ const struct pinctrl_pin_desc *pins;
+ unsigned int num_pins;
+
+ const struct tegra_xusb_padctl_function *functions;
+ unsigned int num_functions;
+
+ const struct tegra_xusb_padctl_lane *lanes;
+ unsigned int num_lanes;
+};
+
+struct tegra_xusb_padctl_lane {
+ const char *name;
+
+ unsigned int offset;
+ unsigned int shift;
+ unsigned int mask;
+ unsigned int iddq;
+
+ const unsigned int *funcs;
+ unsigned int num_funcs;
+};
+
+struct tegra_xusb_padctl {
+ struct device *dev;
+ void __iomem *regs;
+ struct mutex lock;
+ struct reset_control *rst;
+
+ const struct tegra_xusb_padctl_soc *soc;
+ struct pinctrl_dev *pinctrl;
+ struct pinctrl_desc desc;
+
+ struct phy_provider *provider;
+ struct phy *phys[2];
+
+ unsigned int enable;
+};
+
+static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,
+ unsigned long offset)
+{
+ writel(value, padctl->regs + offset);
+}
+
+static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl,
+ unsigned long offset)
+{
+ return readl(padctl->regs + offset);
+}
+
+static int tegra_xusb_padctl_get_groups_count(struct pinctrl_dev *pinctrl)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->num_pins;
+}
+
+static const char *tegra_xusb_padctl_get_group_name(struct pinctrl_dev *pinctrl,
+ unsigned int group)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->pins[group].name;
+}
+
+enum tegra_xusb_padctl_param {
+ TEGRA_XUSB_PADCTL_IDDQ,
+};
+
+static const struct tegra_xusb_padctl_property {
+ const char *name;
+ enum tegra_xusb_padctl_param param;
+} properties[] = {
+ { "nvidia,iddq", TEGRA_XUSB_PADCTL_IDDQ },
+};
+
+#define TEGRA_XUSB_PADCTL_PACK(param, value) ((param) << 16 | (value))
+#define TEGRA_XUSB_PADCTL_UNPACK_PARAM(config) ((config) >> 16)
+#define TEGRA_XUSB_PADCTL_UNPACK_VALUE(config) ((config) & 0xffff)
+
+static int tegra_xusb_padctl_parse_subnode(struct tegra_xusb_padctl *padctl,
+ struct device_node *np,
+ struct pinctrl_map **maps,
+ unsigned int *reserved_maps,
+ unsigned int *num_maps)
+{
+ unsigned int i, reserve = 0, num_configs = 0;
+ unsigned long config, *configs = NULL;
+ const char *function, *group;
+ struct property *prop;
+ int err = 0;
+ u32 value;
+
+ err = of_property_read_string(np, "nvidia,function", &function);
+ if (err < 0) {
+ if (err != -EINVAL)
+ return err;
+
+ function = NULL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(properties); i++) {
+ err = of_property_read_u32(np, properties[i].name, &value);
+ if (err < 0) {
+ if (err == -EINVAL)
+ continue;
+
+ return err;
+ }
+
+ config = TEGRA_XUSB_PADCTL_PACK(properties[i].param, value);
+
+ err = pinctrl_utils_add_config(padctl->pinctrl, &configs,
+ &num_configs, config);
+ if (err < 0)
+ return err;
+ }
+
+ if (function)
+ reserve++;
+
+ if (num_configs)
+ reserve++;
+
+ err = of_property_count_strings(np, "nvidia,lanes");
+ if (err < 0)
+ return err;
+
+ reserve *= err;
+
+ err = pinctrl_utils_reserve_map(padctl->pinctrl, maps, reserved_maps,
+ num_maps, reserve);
+ if (err < 0)
+ return err;
+
+ of_property_for_each_string(np, "nvidia,lanes", prop, group) {
+ if (function) {
+ err = pinctrl_utils_add_map_mux(padctl->pinctrl, maps,
+ reserved_maps, num_maps, group,
+ function);
+ if (err < 0)
+ return err;
+ }
+
+ if (num_configs) {
+ err = pinctrl_utils_add_map_configs(padctl->pinctrl,
+ maps, reserved_maps, num_maps, group,
+ configs, num_configs,
+ PIN_MAP_TYPE_CONFIGS_GROUP);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_dt_node_to_map(struct pinctrl_dev *pinctrl,
+ struct device_node *parent,
+ struct pinctrl_map **maps,
+ unsigned int *num_maps)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ unsigned int reserved_maps = 0;
+ struct device_node *np;
+ int err;
+
+ *num_maps = 0;
+ *maps = NULL;
+
+ for_each_child_of_node(parent, np) {
+ err = tegra_xusb_padctl_parse_subnode(padctl, np, maps,
+ &reserved_maps,
+ num_maps);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct pinctrl_ops tegra_xusb_padctl_pinctrl_ops = {
+ .get_groups_count = tegra_xusb_padctl_get_groups_count,
+ .get_group_name = tegra_xusb_padctl_get_group_name,
+ .dt_node_to_map = tegra_xusb_padctl_dt_node_to_map,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int tegra_xusb_padctl_get_functions_count(struct pinctrl_dev *pinctrl)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->num_functions;
+}
+
+static const char *
+tegra_xusb_padctl_get_function_name(struct pinctrl_dev *pinctrl,
+ unsigned int function)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->functions[function].name;
+}
+
+static int tegra_xusb_padctl_get_function_groups(struct pinctrl_dev *pinctrl,
+ unsigned int function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ *num_groups = padctl->soc->functions[function].num_groups;
+ *groups = padctl->soc->functions[function].groups;
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_pinmux_enable(struct pinctrl_dev *pinctrl,
+ unsigned int function,
+ unsigned int group)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ const struct tegra_xusb_padctl_lane *lane;
+ unsigned int i;
+ u32 value;
+
+ lane = &padctl->soc->lanes[group];
+
+ for (i = 0; i < lane->num_funcs; i++)
+ if (lane->funcs[i] == function)
+ break;
+
+ if (i >= lane->num_funcs)
+ return -EINVAL;
+
+ value = padctl_readl(padctl, lane->offset);
+ value &= ~(lane->mask << lane->shift);
+ value |= i << lane->shift;
+ padctl_writel(padctl, value, lane->offset);
+
+ return 0;
+}
+
+static const struct pinmux_ops tegra_xusb_padctl_pinmux_ops = {
+ .get_functions_count = tegra_xusb_padctl_get_functions_count,
+ .get_function_name = tegra_xusb_padctl_get_function_name,
+ .get_function_groups = tegra_xusb_padctl_get_function_groups,
+ .enable = tegra_xusb_padctl_pinmux_enable,
+};
+
+static int tegra_xusb_padctl_pinconf_group_get(struct pinctrl_dev *pinctrl,
+ unsigned int group,
+ unsigned long *config)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ const struct tegra_xusb_padctl_lane *lane;
+ enum tegra_xusb_padctl_param param;
+ u32 value;
+
+ param = TEGRA_XUSB_PADCTL_UNPACK_PARAM(*config);
+ lane = &padctl->soc->lanes[group];
+
+ switch (param) {
+ case TEGRA_XUSB_PADCTL_IDDQ:
+ /* lanes with iddq == 0 don't support this parameter */
+ if (lane->iddq == 0)
+ return -EINVAL;
+
+ value = padctl_readl(padctl, lane->offset);
+
+ if (value & BIT(lane->iddq))
+ value = 0;
+ else
+ value = 1;
+
+ *config = TEGRA_XUSB_PADCTL_PACK(param, value);
+ break;
+
+ default:
+ dev_err(padctl->dev, "invalid configuration parameter: %04x\n",
+ param);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_pinconf_group_set(struct pinctrl_dev *pinctrl,
+ unsigned int group,
+ unsigned long *configs,
+ unsigned int num_configs)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ const struct tegra_xusb_padctl_lane *lane;
+ enum tegra_xusb_padctl_param param;
+ unsigned long value;
+ unsigned int i;
+ u32 regval;
+
+ lane = &padctl->soc->lanes[group];
+
+ for (i = 0; i < num_configs; i++) {
+ param = TEGRA_XUSB_PADCTL_UNPACK_PARAM(configs[i]);
+ value = TEGRA_XUSB_PADCTL_UNPACK_VALUE(configs[i]);
+
+ switch (param) {
+ case TEGRA_XUSB_PADCTL_IDDQ:
+ /* lanes with iddq == 0 don't support this parameter */
+ if (lane->iddq == 0)
+ return -EINVAL;
+
+ regval = padctl_readl(padctl, lane->offset);
+
+ if (value)
+ regval &= ~BIT(lane->iddq);
+ else
+ regval |= BIT(lane->iddq);
+
+ padctl_writel(padctl, regval, lane->offset);
+ break;
+
+ default:
+ dev_err(padctl->dev,
+ "invalid configuration parameter: %04x\n",
+ param);
+ return -ENOTSUPP;
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static const char *strip_prefix(const char *s)
+{
+ const char *comma = strchr(s, ',');
+ if (!comma)
+ return s;
+
+ return comma + 1;
+}
+
+static void
+tegra_xusb_padctl_pinconf_group_dbg_show(struct pinctrl_dev *pinctrl,
+ struct seq_file *s,
+ unsigned int group)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(properties); i++) {
+ unsigned long config, value;
+ int err;
+
+ config = TEGRA_XUSB_PADCTL_PACK(properties[i].param, 0);
+
+ err = tegra_xusb_padctl_pinconf_group_get(pinctrl, group,
+ &config);
+ if (err < 0)
+ continue;
+
+ value = TEGRA_XUSB_PADCTL_UNPACK_VALUE(config);
+
+ seq_printf(s, "\n\t%s=%lu\n", strip_prefix(properties[i].name),
+ value);
+ }
+}
+
+static void
+tegra_xusb_padctl_pinconf_config_dbg_show(struct pinctrl_dev *pinctrl,
+ struct seq_file *s,
+ unsigned long config)
+{
+ enum tegra_xusb_padctl_param param;
+ const char *name = "unknown";
+ unsigned long value;
+ unsigned int i;
+
+ param = TEGRA_XUSB_PADCTL_UNPACK_PARAM(config);
+ value = TEGRA_XUSB_PADCTL_UNPACK_VALUE(config);
+
+ for (i = 0; i < ARRAY_SIZE(properties); i++) {
+ if (properties[i].param == param) {
+ name = properties[i].name;
+ break;
+ }
+ }
+
+ seq_printf(s, "%s=%lu", strip_prefix(name), value);
+}
+#endif
+
+static const struct pinconf_ops tegra_xusb_padctl_pinconf_ops = {
+ .pin_config_group_get = tegra_xusb_padctl_pinconf_group_get,
+ .pin_config_group_set = tegra_xusb_padctl_pinconf_group_set,
+#ifdef CONFIG_DEBUG_FS
+ .pin_config_group_dbg_show = tegra_xusb_padctl_pinconf_group_dbg_show,
+ .pin_config_config_dbg_show = tegra_xusb_padctl_pinconf_config_dbg_show,
+#endif
+};
+
+static int tegra_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
+{
+ u32 value;
+
+ mutex_lock(&padctl->lock);
+
+ if (padctl->enable++ > 0)
+ goto out;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+out:
+ mutex_unlock(&padctl->lock);
+ return 0;
+}
+
+static int tegra_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
+{
+ u32 value;
+
+ mutex_lock(&padctl->lock);
+
+ if (WARN_ON(padctl->enable == 0))
+ goto out;
+
+ if (--padctl->enable > 0)
+ goto out;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+out:
+ mutex_unlock(&padctl->lock);
+ return 0;
+}
+
+static int tegra_xusb_phy_init(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+
+ return tegra_xusb_padctl_enable(padctl);
+}
+
+static int tegra_xusb_phy_exit(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+
+ return tegra_xusb_padctl_disable(padctl);
+}
+
+static int pcie_phy_power_on(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ unsigned long timeout;
+ int err = -ETIMEDOUT;
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_P0_CTL1_REFCLK_SEL_MASK;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
+ value |= XUSB_PADCTL_IOPHY_PLL_P0_CTL2_REFCLKBUF_EN |
+ XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_EN |
+ XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_SEL;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+ timeout = jiffies + msecs_to_jiffies(50);
+
+ while (time_before(jiffies, timeout)) {
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ if (value & XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL0_LOCKDET) {
+ err = 0;
+ break;
+ }
+
+ usleep_range(100, 200);
+ }
+
+ return err;
+}
+
+static int pcie_phy_power_off(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+ return 0;
+}
+
+static const struct phy_ops pcie_phy_ops = {
+ .init = tegra_xusb_phy_init,
+ .exit = tegra_xusb_phy_exit,
+ .power_on = pcie_phy_power_on,
+ .power_off = pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int sata_phy_power_on(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ unsigned long timeout;
+ int err = -ETIMEDOUT;
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
+ value &= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ timeout = jiffies + msecs_to_jiffies(50);
+
+ while (time_before(jiffies, timeout)) {
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ if (value & XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_LOCKDET) {
+ err = 0;
+ break;
+ }
+
+ usleep_range(100, 200);
+ }
+
+ return err;
+}
+
+static int sata_phy_power_off(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+ value |= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
+ value |= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+
+ return 0;
+}
+
+static const struct phy_ops sata_phy_ops = {
+ .init = tegra_xusb_phy_init,
+ .exit = tegra_xusb_phy_exit,
+ .power_on = sata_phy_power_on,
+ .power_off = sata_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *tegra_xusb_padctl_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+ unsigned int index = args->args[0];
+
+ if (args->args_count <= 0)
+ return ERR_PTR(-EINVAL);
+
+ if (index > ARRAY_SIZE(padctl->phys))
+ return ERR_PTR(-EINVAL);
+
+ return padctl->phys[index];
+}
+
+#define PIN_OTG_0 0
+#define PIN_OTG_1 1
+#define PIN_OTG_2 2
+#define PIN_ULPI_0 3
+#define PIN_HSIC_0 4
+#define PIN_HSIC_1 5
+#define PIN_PCIE_0 6
+#define PIN_PCIE_1 7
+#define PIN_PCIE_2 8
+#define PIN_PCIE_3 9
+#define PIN_PCIE_4 10
+#define PIN_SATA_0 11
+
+static const struct pinctrl_pin_desc tegra124_pins[] = {
+ PINCTRL_PIN(PIN_OTG_0, "otg-0"),
+ PINCTRL_PIN(PIN_OTG_1, "otg-1"),
+ PINCTRL_PIN(PIN_OTG_2, "otg-2"),
+ PINCTRL_PIN(PIN_ULPI_0, "ulpi-0"),
+ PINCTRL_PIN(PIN_HSIC_0, "hsic-0"),
+ PINCTRL_PIN(PIN_HSIC_1, "hsic-1"),
+ PINCTRL_PIN(PIN_PCIE_0, "pcie-0"),
+ PINCTRL_PIN(PIN_PCIE_1, "pcie-1"),
+ PINCTRL_PIN(PIN_PCIE_2, "pcie-2"),
+ PINCTRL_PIN(PIN_PCIE_3, "pcie-3"),
+ PINCTRL_PIN(PIN_PCIE_4, "pcie-4"),
+ PINCTRL_PIN(PIN_SATA_0, "sata-0"),
+};
+
+static const char * const tegra124_snps_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+ "ulpi-0",
+ "hsic-0",
+ "hsic-1",
+};
+
+static const char * const tegra124_xusb_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+ "ulpi-0",
+ "hsic-0",
+ "hsic-1",
+};
+
+static const char * const tegra124_uart_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+};
+
+static const char * const tegra124_pcie_groups[] = {
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+static const char * const tegra124_usb3_groups[] = {
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+static const char * const tegra124_sata_groups[] = {
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+static const char * const tegra124_rsvd_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+#define TEGRA124_FUNCTION(_name) \
+ { \
+ .name = #_name, \
+ .num_groups = ARRAY_SIZE(tegra124_##_name##_groups), \
+ .groups = tegra124_##_name##_groups, \
+ }
+
+static struct tegra_xusb_padctl_function tegra124_functions[] = {
+ TEGRA124_FUNCTION(snps),
+ TEGRA124_FUNCTION(xusb),
+ TEGRA124_FUNCTION(uart),
+ TEGRA124_FUNCTION(pcie),
+ TEGRA124_FUNCTION(usb3),
+ TEGRA124_FUNCTION(sata),
+ TEGRA124_FUNCTION(rsvd),
+};
+
+enum tegra124_function {
+ TEGRA124_FUNC_SNPS,
+ TEGRA124_FUNC_XUSB,
+ TEGRA124_FUNC_UART,
+ TEGRA124_FUNC_PCIE,
+ TEGRA124_FUNC_USB3,
+ TEGRA124_FUNC_SATA,
+ TEGRA124_FUNC_RSVD,
+};
+
+static const unsigned int tegra124_otg_functions[] = {
+ TEGRA124_FUNC_SNPS,
+ TEGRA124_FUNC_XUSB,
+ TEGRA124_FUNC_UART,
+ TEGRA124_FUNC_RSVD,
+};
+
+static const unsigned int tegra124_usb_functions[] = {
+ TEGRA124_FUNC_SNPS,
+ TEGRA124_FUNC_XUSB,
+};
+
+static const unsigned int tegra124_pci_functions[] = {
+ TEGRA124_FUNC_PCIE,
+ TEGRA124_FUNC_USB3,
+ TEGRA124_FUNC_SATA,
+ TEGRA124_FUNC_RSVD,
+};
+
+#define TEGRA124_LANE(_name, _offset, _shift, _mask, _iddq, _funcs) \
+ { \
+ .name = _name, \
+ .offset = _offset, \
+ .shift = _shift, \
+ .mask = _mask, \
+ .iddq = _iddq, \
+ .num_funcs = ARRAY_SIZE(tegra124_##_funcs##_functions), \
+ .funcs = tegra124_##_funcs##_functions, \
+ }
+
+static const struct tegra_xusb_padctl_lane tegra124_lanes[] = {
+ TEGRA124_LANE("otg-0", 0x004, 0, 0x3, 0, otg),
+ TEGRA124_LANE("otg-1", 0x004, 2, 0x3, 0, otg),
+ TEGRA124_LANE("otg-2", 0x004, 4, 0x3, 0, otg),
+ TEGRA124_LANE("ulpi-0", 0x004, 12, 0x1, 0, usb),
+ TEGRA124_LANE("hsic-0", 0x004, 14, 0x1, 0, usb),
+ TEGRA124_LANE("hsic-1", 0x004, 15, 0x1, 0, usb),
+ TEGRA124_LANE("pcie-0", 0x134, 16, 0x3, 1, pci),
+ TEGRA124_LANE("pcie-1", 0x134, 18, 0x3, 2, pci),
+ TEGRA124_LANE("pcie-2", 0x134, 20, 0x3, 3, pci),
+ TEGRA124_LANE("pcie-3", 0x134, 22, 0x3, 4, pci),
+ TEGRA124_LANE("pcie-4", 0x134, 24, 0x3, 5, pci),
+ TEGRA124_LANE("sata-0", 0x134, 26, 0x3, 6, pci),
+};
+
+static const struct tegra_xusb_padctl_soc tegra124_soc = {
+ .num_pins = ARRAY_SIZE(tegra124_pins),
+ .pins = tegra124_pins,
+ .num_functions = ARRAY_SIZE(tegra124_functions),
+ .functions = tegra124_functions,
+ .num_lanes = ARRAY_SIZE(tegra124_lanes),
+ .lanes = tegra124_lanes,
+};
+
+static const struct of_device_id tegra_xusb_padctl_of_match[] = {
+ { .compatible = "nvidia,tegra124-xusb-padctl", .data = &tegra124_soc },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match);
+
+static int tegra_xusb_padctl_probe(struct platform_device *pdev)
+{
+ struct tegra_xusb_padctl *padctl;
+ const struct of_device_id *match;
+ struct resource *res;
+ struct phy *phy;
+ int err;
+
+ padctl = devm_kzalloc(&pdev->dev, sizeof(*padctl), GFP_KERNEL);
+ if (!padctl)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, padctl);
+ mutex_init(&padctl->lock);
+ padctl->dev = &pdev->dev;
+
+ match = of_match_node(tegra_xusb_padctl_of_match, pdev->dev.of_node);
+ padctl->soc = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ padctl->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(padctl->regs))
+ return PTR_ERR(padctl->regs);
+
+ padctl->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(padctl->rst))
+ return PTR_ERR(padctl->rst);
+
+ err = reset_control_deassert(padctl->rst);
+ if (err < 0)
+ return err;
+
+ memset(&padctl->desc, 0, sizeof(padctl->desc));
+ padctl->desc.name = dev_name(padctl->dev);
+ padctl->desc.pctlops = &tegra_xusb_padctl_pinctrl_ops;
+ padctl->desc.pmxops = &tegra_xusb_padctl_pinmux_ops;
+ padctl->desc.confops = &tegra_xusb_padctl_pinconf_ops;
+ padctl->desc.owner = THIS_MODULE;
+
+ padctl->pinctrl = pinctrl_register(&padctl->desc, &pdev->dev, padctl);
+ if (!padctl->pinctrl) {
+ dev_err(&pdev->dev, "failed to register pincontrol\n");
+ err = -ENODEV;
+ goto reset;
+ }
+
- phy = devm_phy_create(&pdev->dev, &sata_phy_ops, NULL);
++ phy = devm_phy_create(&pdev->dev, NULL, &pcie_phy_ops, NULL);
+ if (IS_ERR(phy)) {
+ err = PTR_ERR(phy);
+ goto unregister;
+ }
+
+ padctl->phys[TEGRA_XUSB_PADCTL_PCIE] = phy;
+ phy_set_drvdata(phy, padctl);
+
++ phy = devm_phy_create(&pdev->dev, NULL, &sata_phy_ops, NULL);
+ if (IS_ERR(phy)) {
+ err = PTR_ERR(phy);
+ goto unregister;
+ }
+
+ padctl->phys[TEGRA_XUSB_PADCTL_SATA] = phy;
+ phy_set_drvdata(phy, padctl);
+
+ padctl->provider = devm_of_phy_provider_register(&pdev->dev,
+ tegra_xusb_padctl_xlate);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to register PHYs: %d\n", err);
+ goto unregister;
+ }
+
+ return 0;
+
+unregister:
+ pinctrl_unregister(padctl->pinctrl);
+reset:
+ reset_control_assert(padctl->rst);
+ return err;
+}
+
+static int tegra_xusb_padctl_remove(struct platform_device *pdev)
+{
+ struct tegra_xusb_padctl *padctl = platform_get_drvdata(pdev);
+ int err;
+
+ pinctrl_unregister(padctl->pinctrl);
+
+ err = reset_control_assert(padctl->rst);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
+
+ return err;
+}
+
+static struct platform_driver tegra_xusb_padctl_driver = {
+ .driver = {
+ .name = "tegra-xusb-padctl",
+ .of_match_table = tegra_xusb_padctl_of_match,
+ },
+ .probe = tegra_xusb_padctl_probe,
+ .remove = tegra_xusb_padctl_remove,
+};
+module_platform_driver(tegra_xusb_padctl_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("Tegra 124 XUSB Pad Control driver");
+MODULE_LICENSE("GPL v2");
If in doubt, it's safe to enable this option; it doesn't kick
in unless the board's description says it's wired that way.
- config BACKLIGHT_ATMEL_PWM
- tristate "Atmel PWM backlight control"
- depends on ATMEL_PWM
- help
- Say Y here if you want to use the PWM peripheral in Atmel AT91 and
- AVR32 devices. This driver will need additional platform data to know
- which PWM instance to use and how to configure it.
-
- To compile this driver as a module, choose M here: the module will be
- called atmel-pwm-bl.
-
config BACKLIGHT_EP93XX
tristate "Cirrus EP93xx Backlight Driver"
depends on FB_EP93XX
known as the Corgi backlight driver. If you have a Sharp Zaurus
SL-C7xx, SL-Cxx00 or SL-6000x say y.
+config BACKLIGHT_IPAQ_MICRO
+ tristate "iPAQ microcontroller backlight driver"
+ depends on MFD_IPAQ_MICRO
+ default y
+ help
+ Say y to enable the backlight driver for Compaq iPAQ handheld
+ computers. Say yes if you have one of the h3100/h3600/h3700
+ machines.
+
config BACKLIGHT_LM3533
tristate "Backlight Driver for LM3533"
depends on BACKLIGHT_CLASS_DEVICE
obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o
obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o
- obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
obj-$(CONFIG_BACKLIGHT_BD6107) += bd6107.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_GPIO) += gpio_backlight.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
+obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o
obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o
obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o
obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
projects / cascardo / linux.git / commitdiff