ath10k: split wmi_cmd_init path
authorBartosz Markowski <bartosz.markowski@tieto.com>
Thu, 26 Sep 2013 15:47:13 +0000 (17:47 +0200)
committerKalle Valo <kvalo@qca.qualcomm.com>
Fri, 27 Sep 2013 11:58:15 +0000 (14:58 +0300)
Due to API differences in initialization structures for
main and 10.x firmwares we need to split the wmi_init_cmd
and wmi_resource_config  structures.

This will be usefull also when setting the correct TARGET values,
like: number of peers, vdevs, pdevs etc.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/ath10k/wmi.c
drivers/net/wireless/ath/ath10k/wmi.h

index 8c22367..71ad1b8 100644 (file)
@@ -1908,7 +1908,7 @@ int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
        return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_set_param_cmdid);
 }
 
-int ath10k_wmi_cmd_init(struct ath10k *ar)
+static int ath10k_wmi_main_cmd_init(struct ath10k *ar)
 {
        struct wmi_init_cmd *cmd;
        struct sk_buff *buf;
@@ -2007,6 +2007,109 @@ out:
        return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
 }
 
+static int ath10k_wmi_10x_cmd_init(struct ath10k *ar)
+{
+       struct wmi_init_cmd_10x *cmd;
+       struct sk_buff *buf;
+       struct wmi_resource_config_10x config = {};
+       u32 len, val;
+       int i;
+
+       config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS);
+       config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS);
+       config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS);
+       config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS);
+       config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT);
+       config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK);
+       config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK);
+       config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+       config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+       config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+       config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI);
+       config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE);
+
+       config.scan_max_pending_reqs =
+               __cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS);
+
+       config.bmiss_offload_max_vdev =
+               __cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV);
+
+       config.roam_offload_max_vdev =
+               __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV);
+
+       config.roam_offload_max_ap_profiles =
+               __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES);
+
+       config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS);
+       config.num_mcast_table_elems =
+               __cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS);
+
+       config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE);
+       config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE);
+       config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES);
+       config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE);
+       config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM);
+
+       val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
+       config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val);
+
+       config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG);
+
+       config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC);
+       config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES);
+
+       len = sizeof(*cmd) +
+             (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
+
+       buf = ath10k_wmi_alloc_skb(len);
+       if (!buf)
+               return -ENOMEM;
+
+       cmd = (struct wmi_init_cmd_10x *)buf->data;
+
+       if (ar->wmi.num_mem_chunks == 0) {
+               cmd->num_host_mem_chunks = 0;
+               goto out;
+       }
+
+       ath10k_dbg(ATH10K_DBG_WMI, "wmi sending %d memory chunks info.\n",
+                  __cpu_to_le32(ar->wmi.num_mem_chunks));
+
+       cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
+
+       for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
+               cmd->host_mem_chunks[i].ptr =
+                       __cpu_to_le32(ar->wmi.mem_chunks[i].paddr);
+               cmd->host_mem_chunks[i].size =
+                       __cpu_to_le32(ar->wmi.mem_chunks[i].len);
+               cmd->host_mem_chunks[i].req_id =
+                       __cpu_to_le32(ar->wmi.mem_chunks[i].req_id);
+
+               ath10k_dbg(ATH10K_DBG_WMI,
+                          "wmi chunk %d len %d requested, addr 0x%x\n",
+                          i,
+                          cmd->host_mem_chunks[i].size,
+                          cmd->host_mem_chunks[i].ptr);
+       }
+out:
+       memcpy(&cmd->resource_config, &config, sizeof(config));
+
+       ath10k_dbg(ATH10K_DBG_WMI, "wmi init 10x\n");
+       return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
+}
+
+int ath10k_wmi_cmd_init(struct ath10k *ar)
+{
+       int ret;
+
+       if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+               ret = ath10k_wmi_10x_cmd_init(ar);
+       else
+               ret = ath10k_wmi_main_cmd_init(ar);
+
+       return ret;
+}
+
 static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
 {
        int len;
index 1c515d6..5383f7e 100644 (file)
@@ -1377,6 +1377,189 @@ struct wmi_resource_config {
        __le32 max_frag_entries;
 } __packed;
 
+struct wmi_resource_config_10x {
+       /* number of virtual devices (VAPs) to support */
+       __le32 num_vdevs;
+
+       /* number of peer nodes to support */
+       __le32 num_peers;
+
+       /* number of keys per peer */
+       __le32 num_peer_keys;
+
+       /* total number of TX/RX data TIDs */
+       __le32 num_tids;
+
+       /*
+        * max skid for resolving hash collisions
+        *
+        *   The address search table is sparse, so that if two MAC addresses
+        *   result in the same hash value, the second of these conflicting
+        *   entries can slide to the next index in the address search table,
+        *   and use it, if it is unoccupied.  This ast_skid_limit parameter
+        *   specifies the upper bound on how many subsequent indices to search
+        *   over to find an unoccupied space.
+        */
+       __le32 ast_skid_limit;
+
+       /*
+        * the nominal chain mask for transmit
+        *
+        *   The chain mask may be modified dynamically, e.g. to operate AP
+        *   tx with a reduced number of chains if no clients are associated.
+        *   This configuration parameter specifies the nominal chain-mask that
+        *   should be used when not operating with a reduced set of tx chains.
+        */
+       __le32 tx_chain_mask;
+
+       /*
+        * the nominal chain mask for receive
+        *
+        *   The chain mask may be modified dynamically, e.g. for a client
+        *   to use a reduced number of chains for receive if the traffic to
+        *   the client is low enough that it doesn't require downlink MIMO
+        *   or antenna diversity.
+        *   This configuration parameter specifies the nominal chain-mask that
+        *   should be used when not operating with a reduced set of rx chains.
+        */
+       __le32 rx_chain_mask;
+
+       /*
+        * what rx reorder timeout (ms) to use for the AC
+        *
+        *   Each WMM access class (voice, video, best-effort, background) will
+        *   have its own timeout value to dictate how long to wait for missing
+        *   rx MPDUs to arrive before flushing subsequent MPDUs that have
+        *   already been received.
+        *   This parameter specifies the timeout in milliseconds for each
+        *   class.
+        */
+       __le32 rx_timeout_pri_vi;
+       __le32 rx_timeout_pri_vo;
+       __le32 rx_timeout_pri_be;
+       __le32 rx_timeout_pri_bk;
+
+       /*
+        * what mode the rx should decap packets to
+        *
+        *   MAC can decap to RAW (no decap), native wifi or Ethernet types
+        *   THis setting also determines the default TX behavior, however TX
+        *   behavior can be modified on a per VAP basis during VAP init
+        */
+       __le32 rx_decap_mode;
+
+       /* what is the maximum scan requests than can be queued */
+       __le32 scan_max_pending_reqs;
+
+       /* maximum VDEV that could use BMISS offload */
+       __le32 bmiss_offload_max_vdev;
+
+       /* maximum VDEV that could use offload roaming */
+       __le32 roam_offload_max_vdev;
+
+       /* maximum AP profiles that would push to offload roaming */
+       __le32 roam_offload_max_ap_profiles;
+
+       /*
+        * how many groups to use for mcast->ucast conversion
+        *
+        *   The target's WAL maintains a table to hold information regarding
+        *   which peers belong to a given multicast group, so that if
+        *   multicast->unicast conversion is enabled, the target can convert
+        *   multicast tx frames to a series of unicast tx frames, to each
+        *   peer within the multicast group.
+            This num_mcast_groups configuration parameter tells the target how
+        *   many multicast groups to provide storage for within its multicast
+        *   group membership table.
+        */
+       __le32 num_mcast_groups;
+
+       /*
+        * size to alloc for the mcast membership table
+        *
+        *   This num_mcast_table_elems configuration parameter tells the
+        *   target how many peer elements it needs to provide storage for in
+        *   its multicast group membership table.
+        *   These multicast group membership table elements are shared by the
+        *   multicast groups stored within the table.
+        */
+       __le32 num_mcast_table_elems;
+
+       /*
+        * whether/how to do multicast->unicast conversion
+        *
+        *   This configuration parameter specifies whether the target should
+        *   perform multicast --> unicast conversion on transmit, and if so,
+        *   what to do if it finds no entries in its multicast group
+        *   membership table for the multicast IP address in the tx frame.
+        *   Configuration value:
+        *   0 -> Do not perform multicast to unicast conversion.
+        *   1 -> Convert multicast frames to unicast, if the IP multicast
+        *        address from the tx frame is found in the multicast group
+        *        membership table.  If the IP multicast address is not found,
+        *        drop the frame.
+        *   2 -> Convert multicast frames to unicast, if the IP multicast
+        *        address from the tx frame is found in the multicast group
+        *        membership table.  If the IP multicast address is not found,
+        *        transmit the frame as multicast.
+        */
+       __le32 mcast2ucast_mode;
+
+       /*
+        * how much memory to allocate for a tx PPDU dbg log
+        *
+        *   This parameter controls how much memory the target will allocate
+        *   to store a log of tx PPDU meta-information (how large the PPDU
+        *   was, when it was sent, whether it was successful, etc.)
+        */
+       __le32 tx_dbg_log_size;
+
+       /* how many AST entries to be allocated for WDS */
+       __le32 num_wds_entries;
+
+       /*
+        * MAC DMA burst size, e.g., For target PCI limit can be
+        * 0 -default, 1 256B
+        */
+       __le32 dma_burst_size;
+
+       /*
+        * Fixed delimiters to be inserted after every MPDU to
+        * account for interface latency to avoid underrun.
+        */
+       __le32 mac_aggr_delim;
+
+       /*
+        *   determine whether target is responsible for detecting duplicate
+        *   non-aggregate MPDU and timing out stale fragments.
+        *
+        *   A-MPDU reordering is always performed on the target.
+        *
+        *   0: target responsible for frag timeout and dup checking
+        *   1: host responsible for frag timeout and dup checking
+        */
+       __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+       /*
+        * Configuration for VoW :
+        * No of Video Nodes to be supported
+        * and Max no of descriptors for each Video link (node).
+        */
+       __le32 vow_config;
+
+       /* Number of msdu descriptors target should use */
+       __le32 num_msdu_desc;
+
+       /*
+        * Max. number of Tx fragments per MSDU
+        *  This parameter controls the max number of Tx fragments per MSDU.
+        *  This is sent by the target as part of the WMI_SERVICE_READY event
+        *  and is overriden by the OS shim as required.
+        */
+       __le32 max_frag_entries;
+} __packed;
+
+
 #define NUM_UNITS_IS_NUM_VDEVS   0x1
 #define NUM_UNITS_IS_NUM_PEERS   0x2
 
@@ -1401,6 +1584,18 @@ struct wmi_init_cmd {
        struct host_memory_chunk host_mem_chunks[1];
 } __packed;
 
+/* _10x stucture is from 10.X FW API */
+struct wmi_init_cmd_10x {
+       struct wmi_resource_config_10x resource_config;
+       __le32 num_host_mem_chunks;
+
+       /*
+        * variable number of host memory chunks.
+        * This should be the last element in the structure
+        */
+       struct host_memory_chunk host_mem_chunks[1];
+} __packed;
+
 /* TLV for channel list */
 struct wmi_chan_list {
        __le32 tag; /* WMI_CHAN_LIST_TAG */