ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4

Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.

Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c
index 9974f20..474cae8 100644 (file)
--- a/sound/soc/codecs/pcm512x.c
+++ b/sound/soc/codecs/pcm512x.c
@@ -1156,25 +1156,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
                                ret, pcm512x->pll_out);
                        return ret;
                }
-
-               gpio = PCM512x_G1OE << (4 - 1);
-               ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN,
-                                        gpio, gpio);
-               if (ret != 0) {
-                       dev_err(codec->dev, "Failed to enable gpio %d: %d\n",
-                               4, ret);
-                       return ret;
-               }
-
-               gpio = PCM512x_GPIO_OUTPUT_1 + 4 - 1;
-               ret = regmap_update_bits(pcm512x->regmap, gpio,
-                                        PCM512x_GxSL, PCM512x_GxSL_PLLLK);
-               if (ret != 0) {
-                       dev_err(codec->dev,
-                               "Failed to output pll lock on %d: %d\n",
-                               ret, 4);
-                       return ret;
-               }
        }
 
        ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,