--- /dev/null
+What: /sys/bus/rbd/
+Date: November 2010
+Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
+ Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Removal of a device:
+
+ $ echo <dev-id> > /sys/bus/rbd/remove
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_id
+
+ The ceph unique client id that was assigned for this specific session.
+
+major
+
+ The block device major number.
+
+name
+
+ The name of the rbd image.
+
+pool
+
+ The pool where this rbd image resides. The pool-name pair is unique
+ per rados system.
+
+size
+
+ The size (in bytes) of the mapped block device.
+
+refresh
+
+ Writing to this file will reread the image header data and set
+ all relevant datastructures accordingly.
+
+current_snap
+
+ The current snapshot for which the device is mapped.
+
+create_snap
+
+ Create a snapshot:
+
+ $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
+
+rollback_snap
+
+ Rolls back data to the specified snapshot. This goes over the entire
+ list of rados blocks and sends a rollback command to each.
+
+ $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
+
+snap_*
+
+ A directory per each snapshot
+
+
+Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
+-------------------------------------------------------------
+
+id
+
+ The rados internal snapshot id assigned for this snapshot
+
+size
+
+ The size of the image when this snapshot was taken.
+
+
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
- Control the bluetooth device. 1 means on, 0 means off.
+ Control the wlan device. 1 means on, 0 means off.
This may control the led, the device or both.
Users: Lapsus
+
+What: /sys/devices/platform/asus_laptop/wimax
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wimax device. 1 means on, 0 means off.
+
+What: /sys/devices/platform/asus_laptop/wwan
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wwan (3G) device. 1 means on, 0 means off.
--- /dev/null
+What: /sys/devices/platform/eeepc-wmi/cpufv
+Date: Oct 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Change CPU clock configuration (write-only).
+ There are three available clock configuration:
+ * 0 -> Super Performance Mode
+ * 1 -> High Performance Mode
+ * 2 -> Power Saving Mode
</sect2>
</sect1>
</chapter>
- <chapter id="clk">
- <title>Clock Framework Extensions</title>
-!Iinclude/linux/sh_clk.h
- </chapter>
<chapter id="mach">
<title>Machine Specific Interfaces</title>
<sect1 id="dreamcast">
</orgname>
<address>
- <email>hjk@linutronix.de</email>
+ <email>hjk@hansjkoch.de</email>
</address>
</affiliation>
</author>
<para>If you know of any translations for this document, or you are
interested in translating it, please email me
-<email>hjk@linutronix.de</email>.
+<email>hjk@hansjkoch.de</email>.
</para>
</sect1>
<title>Feedback</title>
<para>Find something wrong with this document? (Or perhaps something
right?) I would love to hear from you. Please email me at
- <email>hjk@linutronix.de</email>.</para>
+ <email>hjk@hansjkoch.de</email>.</para>
</sect1>
</chapter>
default:
fprintf(stderr, "Unknown nla_type %d\n",
na->nla_type);
+ case TASKSTATS_TYPE_NULL:
break;
}
na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
Kernel boot arguments
---------------------
-vram=<size>
- - Amount of total VRAM to preallocate. For example, "10M". omapfb
- allocates memory for framebuffers from VRAM.
+vram=<size>[,<physaddr>]
+ - Amount of total VRAM to preallocate and optionally a physical start
+ memory address. For example, "10M". omapfb allocates memory for
+ framebuffers from VRAM.
omapfb.mode=<display>:<mode>[,...]
- Default video mode for specified displays. For example,
inclusion, it should be accepted by a relevant subsystem maintainer -
though this acceptance is not a guarantee that the patch will make it
all the way to the mainline. The patch will show up in the maintainer's
- subsystem tree and into the staging trees (described below). When the
+ subsystem tree and into the -next trees (described below). When the
process works, this step leads to more extensive review of the patch and
the discovery of any problems resulting from the integration of this
patch with work being done by others.
normally the right way to go.
-2.4: STAGING TREES
+2.4: NEXT TREES
The chain of subsystem trees guides the flow of patches into the kernel,
but it also raises an interesting question: what if somebody wants to look
the interesting subsystem trees, but that would be a big and error-prone
job.
-The answer comes in the form of staging trees, where subsystem trees are
+The answer comes in the form of -next trees, where subsystem trees are
collected for testing and review. The older of these trees, maintained by
Andrew Morton, is called "-mm" (for memory management, which is how it got
started). The -mm tree integrates patches from a long list of subsystem
Use of the MMOTM tree is likely to be a frustrating experience, though;
there is a definite chance that it will not even compile.
-The other staging tree, started more recently, is linux-next, maintained by
+The other -next tree, started more recently, is linux-next, maintained by
Stephen Rothwell. The linux-next tree is, by design, a snapshot of what
the mainline is expected to look like after the next merge window closes.
Linux-next trees are announced on the linux-kernel and linux-next mailing
See http://lwn.net/Articles/289013/ for more information on this topic, and
stay tuned; much is still in flux where linux-next is involved.
-Besides the mmotm and linux-next trees, the kernel source tree now contains
-the drivers/staging/ directory and many sub-directories for drivers or
-filesystems that are on their way to being added to the kernel tree
-proper, but they remain in drivers/staging/ while they still need more
-work.
-
+2.4.1: STAGING TREES
+
+The kernel source tree now contains the drivers/staging/ directory, where
+many sub-directories for drivers or filesystems that are on their way to
+being added to the kernel tree live. They remain in drivers/staging while
+they still need more work; once complete, they can be moved into the
+kernel proper. This is a way to keep track of drivers that aren't
+up to Linux kernel coding or quality standards, but people may want to use
+them and track development.
+
+Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree.
+Drivers that still need work are sent to him, with each driver having
+its own subdirectory in drivers/staging/. Along with the driver source
+files, a TODO file should be present in the directory as well. The TODO
+file lists the pending work that the driver needs for acceptance into
+the kernel proper, as well as a list of people that should be Cc'd for any
+patches to the driver. Staging drivers that don't currently build should
+have their config entries depend upon CONFIG_BROKEN. Once they can
+be successfully built without outside patches, CONFIG_BROKEN can be removed.
2.5: TOOLS
+++ /dev/null
-
-Device Interfaces
-
-Introduction
-~~~~~~~~~~~~
-
-Device interfaces are the logical interfaces of device classes that correlate
-directly to userspace interfaces, like device nodes.
-
-Each device class may have multiple interfaces through which you can
-access the same device. An input device may support the mouse interface,
-the 'evdev' interface, and the touchscreen interface. A SCSI disk would
-support the disk interface, the SCSI generic interface, and possibly a raw
-device interface.
-
-Device interfaces are registered with the class they belong to. As devices
-are added to the class, they are added to each interface registered with
-the class. The interface is responsible for determining whether the device
-supports the interface or not.
-
-
-Programming Interface
-~~~~~~~~~~~~~~~~~~~~~
-
-struct device_interface {
- char * name;
- rwlock_t lock;
- u32 devnum;
- struct device_class * devclass;
-
- struct list_head node;
- struct driver_dir_entry dir;
-
- int (*add_device)(struct device *);
- int (*add_device)(struct intf_data *);
-};
-
-int interface_register(struct device_interface *);
-void interface_unregister(struct device_interface *);
-
-
-An interface must specify the device class it belongs to. It is added
-to that class's list of interfaces on registration.
-
-
-Interfaces can be added to a device class at any time. Whenever it is
-added, each device in the class is passed to the interface's
-add_device callback. When an interface is removed, each device is
-removed from the interface.
-
-
-Devices
-~~~~~~~
-Once a device is added to a device class, it is added to each
-interface that is registered with the device class. The class
-is expected to place a class-specific data structure in
-struct device::class_data. The interface can use that (along with
-other fields of struct device) to determine whether or not the driver
-and/or device support that particular interface.
-
-
-Data
-~~~~
-
-struct intf_data {
- struct list_head node;
- struct device_interface * intf;
- struct device * dev;
- u32 intf_num;
-};
-
-int interface_add_data(struct interface_data *);
-
-The interface is responsible for allocating and initializing a struct
-intf_data and calling interface_add_data() to add it to the device's list
-of interfaces it belongs to. This list will be iterated over when the device
-is removed from the class (instead of all possible interfaces for a class).
-This structure should probably be embedded in whatever per-device data
-structure the interface is allocating anyway.
-
-Devices are enumerated within the interface. This happens in interface_add_data()
-and the enumerated value is stored in the struct intf_data for that device.
-
-sysfs
-~~~~~
-Each interface is given a directory in the directory of the device
-class it belongs to:
-
-Interfaces get a directory in the class's directory as well:
-
- class/
- `-- input
- |-- devices
- |-- drivers
- |-- mouse
- `-- evdev
-
-When a device is added to the interface, a symlink is created that points
-to the device's directory in the physical hierarchy:
-
- class/
- `-- input
- |-- devices
- | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
- |-- drivers
- | `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
- |-- mouse
- | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
- `-- evdev
- `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-
-
-Future Plans
-~~~~~~~~~~~~
-A device interface is correlated directly with a userspace interface
-for a device, specifically a device node. For instance, a SCSI disk
-exposes at least two interfaces to userspace: the standard SCSI disk
-interface and the SCSI generic interface. It might also export a raw
-device interface.
-
-Many interfaces have a major number associated with them and each
-device gets a minor number. Or, multiple interfaces might share one
-major number, and each will receive a range of minor numbers (like in
-the case of input devices).
-
-These major and minor numbers could be stored in the interface
-structure. Major and minor allocations could happen when the interface
-is registered with the class, or via a helper function.
-
The representation of the above is reflected in the directory tree
in EDAC's sysfs interface. Starting in directory
/sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
..../edac/mc/
....
Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
.../mc/mc0/
In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
Counter reset control file:
'csrowX' DIRECTORIES
In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
Total Uncorrectable Errors count attribute file:
Geert Uytterhoeven <geert@linux-m68k.org>
00-INDEX
- - this file
+ - this file.
arkfb.txt
- info on the fbdev driver for ARK Logic chips.
aty128fb.txt
- info on the ATI Rage128 frame buffer driver.
cirrusfb.txt
- info on the driver for Cirrus Logic chipsets.
+cmap_xfbdev.txt
+ - an introduction to fbdev's cmap structures.
deferred_io.txt
- an introduction to deferred IO.
+efifb.txt
+ - info on the EFI platform driver for Intel based Apple computers.
+ep93xx-fb.txt
+ - info on the driver for EP93xx LCD controller.
fbcon.txt
- intro to and usage guide for the framebuffer console (fbcon).
framebuffer.txt
- introduction to frame buffer devices.
-imacfb.txt
- - info on the generic EFI platform driver for Intel based Macs.
+gxfb.txt
+ - info on the framebuffer driver for AMD Geode GX2 based processors.
intel810.txt
- documentation for the Intel 810/815 framebuffer driver.
intelfb.txt
- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
internals.txt
- quick overview of frame buffer device internals.
+lxfb.txt
+ - info on the framebuffer driver for AMD Geode LX based processors.
matroxfb.txt
- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
+metronomefb.txt
+ - info on the driver for the Metronome display controller.
modedb.txt
- info on the video mode database.
-matroxfb.txt
- - info on the Matrox frame buffer driver.
pvr2fb.txt
- info on the PowerVR 2 frame buffer driver.
pxafb.txt
- info on the fbdev driver for S3 Trio/Virge chips.
sa1100fb.txt
- information about the driver for the SA-1100 LCD controller.
+sh7760fb.txt
+ - info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
sisfb.txt
- info on the framebuffer device driver for various SiS chips.
sstfb.txt
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
tgafb.txt
- - info on the TGA (DECChip 21030) frame buffer driver
+ - info on the TGA (DECChip 21030) frame buffer driver.
+tridentfb.txt
+ info on the framebuffer driver for some Trident chip based cards.
+uvesafb.txt
+ - info on the userspace VESA (VBE2+ compliant) frame buffer device.
vesafb.txt
- - info on the VESA frame buffer device
+ - info on the VESA frame buffer device.
+viafb.modes
+ - list of modes for VIA Integration Graphic Chip.
+viafb.txt
+ - info on the VIA Integration Graphic Chip console framebuffer driver.
vt8623fb.txt
- info on the fb driver for the graphics core in VIA VT8623 chipsets.
Who: NeilBrown <neilb@suse.de>
----------------------------
+
+What: i2c_adapter.id
+When: June 2011
+Why: This field is deprecated. I2C device drivers shouldn't change their
+ behavior based on the underlying I2C adapter. Instead, the I2C
+ adapter driver should instantiate the I2C devices and provide the
+ needed platform-specific information.
+Who: Jean Delvare <khali@linux-fr.org>
+
+----------------------------
char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen);
locking rules:
- none have BKL
dcache_lock rename_lock ->d_lock may block
d_revalidate: no no no yes
d_hash no no no yes
int (*rename) (struct inode *, struct dentry *,
struct inode *, struct dentry *);
int (*readlink) (struct dentry *, char __user *,int);
- int (*follow_link) (struct dentry *, struct nameidata *);
+ void * (*follow_link) (struct dentry *, struct nameidata *);
+ void (*put_link) (struct dentry *, struct nameidata *, void *);
void (*truncate) (struct inode *);
int (*permission) (struct inode *, int, struct nameidata *);
+ int (*check_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *);
int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
+ void (*truncate_range)(struct inode *, loff_t, loff_t);
+ long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len);
+ int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
locking rules:
- all may block, none have BKL
+ all may block
i_mutex(inode)
lookup: yes
create: yes
rename: yes (all) (see below)
readlink: no
follow_link: no
+put_link: no
truncate: yes (see below)
setattr: yes
permission: no
+check_acl: no
getattr: no
setxattr: yes
getxattr: no
listxattr: no
removexattr: yes
+truncate_range: yes
+fallocate: no
+fiemap: no
Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
victim.
cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
->truncate() is never called directly - it's a callback, not a
-method. It's called by vmtruncate() - library function normally used by
+method. It's called by vmtruncate() - deprecated library function used by
->setattr(). Locking information above applies to that call (i.e. is
inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been
passed).
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
- int (*write_inode) (struct inode *, int);
+ int (*write_inode) (struct inode *, struct writeback_control *wbc);
int (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+ int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
locking rules:
All may block [not true, see below]
- None have BKL
s_umount
alloc_inode:
destroy_inode:
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
+bdev_try_to_free_page: no (see below)
->statfs() has s_umount (shared) when called by ustat(2) (native or
compat), but that's an accident of bad API; s_umount is used to pin
dqio_sem) (unless an admin really wants to screw up something and
writes to quota files with quotas on). For other details about locking
see also dquot_operations section.
+->bdev_try_to_free_page is called from the ->releasepage handler of
+the block device inode. See there for more details.
--------------------------- file_system_type ---------------------------
prototypes:
int (*get_sb) (struct file_system_type *, int,
const char *, void *, struct vfsmount *);
+ struct dentry *(*mount) (struct file_system_type *, int,
+ const char *, void *);
void (*kill_sb) (struct super_block *);
locking rules:
- may block BKL
-get_sb yes no
-kill_sb yes no
+ may block
+get_sb yes
+mount yes
+kill_sb yes
->get_sb() returns error or 0 with locked superblock attached to the vfsmount
(exclusive on ->s_umount).
+->mount() returns ERR_PTR or the root dentry.
->kill_sb() takes a write-locked superblock, does all shutdown work on it,
unlocks and drops the reference.
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
- int (*launder_page) (struct page *);
+ int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **,
+ unsigned long *);
+ int (*migratepage)(struct address_space *, struct page *, struct page *);
+ int (*launder_page)(struct page *);
+ int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long);
+ int (*error_remove_page)(struct address_space *, struct page *);
locking rules:
- All except set_page_dirty may block
-
- BKL PageLocked(page) i_mutex
-writepage: no yes, unlocks (see below)
-readpage: no yes, unlocks
-sync_page: no maybe
-writepages: no
-set_page_dirty no no
-readpages: no
-write_begin: no locks the page yes
-write_end: no yes, unlocks yes
-perform_write: no n/a yes
-bmap: no
-invalidatepage: no yes
-releasepage: no yes
-direct_IO: no
-launder_page: no yes
+ All except set_page_dirty and freepage may block
+
+ PageLocked(page) i_mutex
+writepage: yes, unlocks (see below)
+readpage: yes, unlocks
+sync_page: maybe
+writepages:
+set_page_dirty no
+readpages:
+write_begin: locks the page yes
+write_end: yes, unlocks yes
+bmap:
+invalidatepage: yes
+releasepage: yes
+freepage: yes
+direct_IO:
+get_xip_mem: maybe
+migratepage: yes (both)
+launder_page: yes
+is_partially_uptodate: yes
+error_remove_page: yes
->write_begin(), ->write_end(), ->sync_page() and ->readpage()
may be called from the request handler (/dev/loop).
not locked.
->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some
-filesystems and by the swapper. The latter will eventually go away. All
-instances do not actually need the BKL. Please, keep it that way and don't
-breed new callers.
+filesystems and by the swapper. The latter will eventually go away. Please,
+keep it that way and don't breed new callers.
->invalidatepage() is called when the filesystem must attempt to drop
some or all of the buffers from the page when it is being truncated. It
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
+ ->freepage() is called when the kernel is done dropping the page
+from the page cache.
+
->launder_page() may be called prior to releasing a page if
it is still found to be dirty. It returns zero if the page was successfully
cleaned, or an error value if not. Note that in order to prevent the page
getting mapped back in and redirtied, it needs to be kept locked
across the entire operation.
- Note: currently almost all instances of address_space methods are
-using BKL for internal serialization and that's one of the worst sources
-of contention. Normally they are calling library functions (in fs/buffer.c)
-and pass foo_get_block() as a callback (on local block-based filesystems,
-indeed). BKL is not needed for library stuff and is usually taken by
-foo_get_block(). It's an overkill, since block bitmaps can be protected by
-internal fs locking and real critical areas are much smaller than the areas
-filesystems protect now.
-
----------------------- file_lock_operations ------------------------------
prototypes:
- void (*fl_insert)(struct file_lock *); /* lock insertion callback */
- void (*fl_remove)(struct file_lock *); /* lock removal callback */
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
locking rules:
- BKL may block
-fl_insert: yes no
-fl_remove: yes no
-fl_copy_lock: yes no
-fl_release_private: yes yes
+ file_lock_lock may block
+fl_copy_lock: yes no
+fl_release_private: maybe no
----------------------- lock_manager_operations ---------------------------
prototypes:
int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
void (*fl_notify)(struct file_lock *); /* unblock callback */
+ int (*fl_grant)(struct file_lock *, struct file_lock *, int);
void (*fl_release_private)(struct file_lock *);
void (*fl_break)(struct file_lock *); /* break_lease callback */
+ int (*fl_mylease)(struct file_lock *, struct file_lock *);
+ int (*fl_change)(struct file_lock **, int);
locking rules:
- BKL may block
-fl_compare_owner: yes no
-fl_notify: yes no
-fl_release_private: yes yes
-fl_break: yes no
-
- Currently only NFSD and NLM provide instances of this class. None of the
-them block. If you have out-of-tree instances - please, show up. Locking
-in that area will change.
+ file_lock_lock may block
+fl_compare_owner: yes no
+fl_notify: yes no
+fl_grant: no no
+fl_release_private: maybe no
+fl_break: yes no
+fl_mylease: yes no
+fl_change yes no
+
--------------------------- buffer_head -----------------------------------
prototypes:
void (*b_end_io)(struct buffer_head *bh, int uptodate);
void (*swap_slot_free_notify) (struct block_device *, unsigned long);
locking rules:
- BKL bd_mutex
-open: no yes
-release: no yes
-ioctl: no no
-compat_ioctl: no no
-direct_access: no no
-media_changed: no no
-unlock_native_capacity: no no
-revalidate_disk: no no
-getgeo: no no
-swap_slot_free_notify: no no (see below)
+ bd_mutex
+open: yes
+release: yes
+ioctl: no
+compat_ioctl: no
+direct_access: no
+media_changed: no
+unlock_native_capacity: no
+revalidate_disk: no
+getgeo: no
+swap_slot_free_notify: no (see below)
media_changed, unlock_native_capacity and revalidate_disk are called only from
check_disk_change().
unsigned long (*get_unmapped_area)(struct file *, unsigned long,
unsigned long, unsigned long, unsigned long);
int (*check_flags)(int);
+ int (*flock) (struct file *, int, struct file_lock *);
+ ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *,
+ size_t, unsigned int);
+ ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *,
+ size_t, unsigned int);
+ int (*setlease)(struct file *, long, struct file_lock **);
};
locking rules:
- All may block.
- BKL
-llseek: no (see below)
-read: no
-aio_read: no
-write: no
-aio_write: no
-readdir: no
-poll: no
-unlocked_ioctl: no
-compat_ioctl: no
-mmap: no
-open: no
-flush: no
-release: no
-fsync: no (see below)
-aio_fsync: no
-fasync: no
-lock: yes
-readv: no
-writev: no
-sendfile: no
-sendpage: no
-get_unmapped_area: no
-check_flags: no
+ All may block except for ->setlease.
+ No VFS locks held on entry except for ->fsync and ->setlease.
+
+->fsync() has i_mutex on inode.
+
+->setlease has the file_list_lock held and must not sleep.
->llseek() locking has moved from llseek to the individual llseek
implementations. If your fs is not using generic_file_llseek, you
Note: this does not protect the file->f_pos against concurrent modifications
since this is something the userspace has to take care about.
-Note: ext2_release() was *the* source of contention on fs-intensive
-loads and dropping BKL on ->release() helps to get rid of that (we still
-grab BKL for cases when we close a file that had been opened r/w, but that
-can and should be done using the internal locking with smaller critical areas).
-Current worst offender is ext2_get_block()...
-
-->fasync() is called without BKL protection, and is responsible for
-maintaining the FASYNC bit in filp->f_flags. Most instances call
-fasync_helper(), which does that maintenance, so it's not normally
-something one needs to worry about. Return values > 0 will be mapped to
-zero in the VFS layer.
+->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags.
+Most instances call fasync_helper(), which does that maintenance, so it's
+not normally something one needs to worry about. Return values > 0 will be
+mapped to zero in the VFS layer.
->readdir() and ->ioctl() on directories must be changed. Ideally we would
move ->readdir() to inode_operations and use a separate method for directory
->read on directories probably must go away - we should just enforce -EISDIR
in sys_read() and friends.
-->fsync() has i_mutex on inode.
-
--------------------------- dquot_operations -------------------------------
prototypes:
int (*write_dquot) (struct dquot *);
int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:
- BKL mmap_sem PageLocked(page)
-open: no yes
-close: no yes
-fault: no yes can return with page locked
-page_mkwrite: no yes can return with page locked
-access: no yes
+ mmap_sem PageLocked(page)
+open: yes
+close: yes
+fault: yes can return with page locked
+page_mkwrite: yes can return with page locked
+access: yes
->fault() is called when a previously not present pte is about
to be faulted in. The filesystem must find and return the page associated
(if you break something or notice that it is broken and do not fix it yourself
- at least put it here)
-
-ipc/shm.c::shm_delete() - may need BKL.
-->read() and ->write() in many drivers are (probably) missing BKL.
char *p = (char *) page;
tmp = simple_strtoul(p, &p, 10);
- if (!p || (*p && (*p != '\n')))
+ if ((*p != '\0') && (*p != '\n'))
return -EINVAL;
if (tmp > INT_MAX)
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
struct page* (*get_xip_page)(struct address_space *, sector_t,
releasepage: releasepage is called on PagePrivate pages to indicate
that the page should be freed if possible. ->releasepage
should remove any private data from the page and clear the
- PagePrivate flag. It may also remove the page from the
- address_space. If this fails for some reason, it may indicate
- failure with a 0 return value.
- This is used in two distinct though related cases. The first
- is when the VM finds a clean page with no active users and
+ PagePrivate flag. If releasepage() fails for some reason, it must
+ indicate failure with a 0 return value.
+ releasepage() is used in two distinct though related cases. The
+ first is when the VM finds a clean page with no active users and
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.
need to ensure this. Possibly it can clear the PageUptodate
bit if it cannot free private data yet.
+ freepage: freepage is called once the page is no longer visible in
+ the page cache in order to allow the cleanup of any private
+ data. Since it may be called by the memory reclaimer, it
+ should not assume that the original address_space mapping still
+ exists, and it should not block.
+
direct_IO: called by the generic read/write routines to perform
direct_IO - that is IO requests which bypass the page cache
and transfer data directly between the storage and the
is configured as an output, this value may be written;
any nonzero value is treated as high.
+ If the pin can be configured as interrupt-generating interrupt
+ and if it has been configured to generate interrupts (see the
+ description of "edge"), you can poll(2) on that file and
+ poll(2) will return whenever the interrupt was triggered. If
+ you use poll(2), set the events POLLPRI and POLLERR. If you
+ use select(2), set the file descriptor in exceptfds. After
+ poll(2) returns, either lseek(2) to the beginning of the sysfs
+ file and read the new value or close the file and re-open it
+ to read the value.
+
"edge" ... reads as either "none", "rising", "falling", or
"both". Write these strings to select the signal edge(s)
that will make poll(2) on the "value" file return.
Mark M. Hoffman <mhoffman@lightlink.com>
Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
- Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+ Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
Module Parameters
-----------------
Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
Authors:
- Hans J. Koch <hjk@linutronix.de>
+ Hans J. Koch <hjk@hansjkoch.de>
John Morris <john.morris@spirentcom.com>
Claus Gindhart <claus.gindhart@kontron.com>
nousb [USB] Disable the USB subsystem
- nowatchdog [KNL] Disable the lockup detector.
+ nowatchdog [KNL] Disable the lockup detector (NMI watchdog).
nowb [ARM]
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
- resource_alloc_from_bottom
- Allocate new resources from the beginning of available
- space, not the end. If you need to use this, please
- report a bug.
-
resume= [SWSUSP]
Specify the partition device for software suspend
improve throughput, but will also increase the
amount of memory reserved for use by the client.
+ swapaccount[=0|1]
+ [KNL] Enable accounting of swap in memory resource
+ controller if no parameter or 1 is given or disable
+ it if 0 is given (See Documentation/cgroups/memory.txt)
+
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
Count buffering overhead as bytes/2^tcp_adv_win_scale
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
if it is <= 0.
+ Possible values are [-31, 31], inclusive.
Default: 2
tcp_allowed_congestion_control - STRING
SoC framework -> modifies on required cases certain OPPs -> OPP layer
-> queries to search/retrieve information ->
+Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
+to make the OPP layer available.
+
OPP layer expects each domain to be represented by a unique device pointer. SoC
framework registers a set of initial OPPs per device with the OPP layer. This
list is expected to be an optimally small number typically around 5 per device.
zero)
bool pm_runtime_suspended(struct device *dev);
- - return true if the device's runtime PM status is 'suspended', or false
- otherwise
+ - return true if the device's runtime PM status is 'suspended' and its
+ 'power.disable_depth' field is equal to zero, or false otherwise
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
/**
- * queuecommand - queue scsi command, invoke 'done' on completion
+ * queuecommand - queue scsi command, invoke scp->scsi_done on completion
+ * @shost: pointer to the scsi host object
* @scp: pointer to scsi command object
- * @done: function pointer to be invoked on completion
*
* Returns 0 on success.
*
*
* Other types of errors that are detected immediately may be
* flagged by setting scp->result to an appropriate value,
- * invoking the 'done' callback, and then returning 0 from this
- * function. If the command is not performed immediately (and the
- * LLD is starting (or will start) the given command) then this
- * function should place 0 in scp->result and return 0.
+ * invoking the scp->scsi_done callback, and then returning 0
+ * from this function. If the command is not performed
+ * immediately (and the LLD is starting (or will start) the given
+ * command) then this function should place 0 in scp->result and
+ * return 0.
*
* Command ownership. If the driver returns zero, it owns the
- * command and must take responsibility for ensuring the 'done'
- * callback is executed. Note: the driver may call done before
- * returning zero, but after it has called done, it may not
- * return any value other than zero. If the driver makes a
- * non-zero return, it must not execute the command's done
- * callback at any time.
- *
- * Locks: struct Scsi_Host::host_lock held on entry (with "irqsave")
- * and is expected to be held on return.
+ * command and must take responsibility for ensuring the
+ * scp->scsi_done callback is executed. Note: the driver may
+ * call scp->scsi_done before returning zero, but after it has
+ * called scp->scsi_done, it may not return any value other than
+ * zero. If the driver makes a non-zero return, it must not
+ * execute the command's scsi_done callback at any time.
+ *
+ * Locks: up to and including 2.6.36, struct Scsi_Host::host_lock
+ * held on entry (with "irqsave") and is expected to be
+ * held on return. From 2.6.37 onwards, queuecommand is
+ * called without any locks held.
*
* Calling context: in interrupt (soft irq) or process context
*
- * Notes: This function should be relatively fast. Normally it will
- * not wait for IO to complete. Hence the 'done' callback is invoked
- * (often directly from an interrupt service routine) some time after
- * this function has returned. In some cases (e.g. pseudo adapter
- * drivers that manufacture the response to a SCSI INQUIRY)
- * the 'done' callback may be invoked before this function returns.
- * If the 'done' callback is not invoked within a certain period
- * the SCSI mid level will commence error processing.
- * If a status of CHECK CONDITION is placed in "result" when the
- * 'done' callback is invoked, then the LLD driver should
- * perform autosense and fill in the struct scsi_cmnd::sense_buffer
+ * Notes: This function should be relatively fast. Normally it
+ * will not wait for IO to complete. Hence the scp->scsi_done
+ * callback is invoked (often directly from an interrupt service
+ * routine) some time after this function has returned. In some
+ * cases (e.g. pseudo adapter drivers that manufacture the
+ * response to a SCSI INQUIRY) the scp->scsi_done callback may be
+ * invoked before this function returns. If the scp->scsi_done
+ * callback is not invoked within a certain period the SCSI mid
+ * level will commence error processing. If a status of CHECK
+ * CONDITION is placed in "result" when the scp->scsi_done
+ * callback is invoked, then the LLD driver should perform
+ * autosense and fill in the struct scsi_cmnd::sense_buffer
* array. The scsi_cmnd::sense_buffer array is zeroed prior to
* the mid level queuing a command to an LLD.
*
* Defined in: LLD
**/
- int queuecommand(struct scsi_cmnd * scp,
- void (*done)(struct scsi_cmnd *))
+ int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp)
/**
+++ /dev/null
-Clock framework on SuperH architecture
-
-The framework on SH extends existing API by the function clk_set_rate_ex,
-which prototype is as follows:
-
- clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
-
-The algo_id parameter is used to specify algorithm used to recalculate clocks,
-adjanced to clock, specified as first argument. It is assumed that algo_id==0
-means no changes to adjanced clock
-
-Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
-if it is present in ops structure. The method should set the clock rate and adjust
-all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependent. For the sh7722, the following
-values are defined:
-
- NO_CHANGE = 0,
- IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */
- IUS_322, /* I:U:Sh = 3:2:2 */
- IUS_522, /* I:U:Sh = 5:2:2 */
- IUS_N11, /* I:U:Sh = N:1:1 */
- SB_N1, /* Sh:B = N:1 */
- SB3_N1, /* Sh:B3 = N:1 */
- SB3_32, /* Sh:B3 = 3:2 */
- SB3_43, /* Sh:B3 = 4:3 */
- SB3_54, /* Sh:B3 = 5:4 */
- BP_N1, /* B:P = N:1 */
- IP_N1 /* I:P = N:1 */
-
-Each of these constants means relation between clocks that can be set via the FRQCR
-register
print " $regex_lru_isolate/o\n";
next;
}
+ my $isolate_mode = $1;
my $nr_scanned = $4;
my $nr_contig_dirty = $7;
- $perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+
+ # To closer match vmstat scanning statistics, only count isolate_both
+ # and isolate_inactive as scanning. isolate_active is rotation
+ # isolate_inactive == 0
+ # isolate_active == 1
+ # isolate_both == 2
+ if ($isolate_mode != 1) {
+ $perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+ }
$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
$details = $5;
F: drivers/usb/gadget/amd5536udc.*
AMD GEODE PROCESSOR/CHIPSET SUPPORT
-P: Jordan Crouse
+P: Andres Salomon <dilinger@queued.net>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
S: Maintained
ARM/BCMRING ARM ARCHITECTURE
-M: Leo Chen <leochen@broadcom.com>
+M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-bcmring
ARM/BCMRING MTD NAND DRIVER
-M: Leo Chen <leochen@broadcom.com>
+M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-mtd@lists.infradead.org
S: Maintained
ARM/NOMADIK ARCHITECTURE
M: Alessandro Rubini <rubini@unipv.it>
+M: Linus Walleij <linus.walleij@stericsson.com>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
F: arch/arm/plat-nomadik/
+F: drivers/i2c/busses/i2c-nomadik.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
F: drivers/mmc/host/msm_sdcc.h
F: drivers/serial/msm_serial.h
F: drivers/serial/msm_serial.c
-T: git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
+T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
L: linux-sh@vger.kernel.org
W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest
S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
F: drivers/rtc/rtc-coh901331.c
F: drivers/watchdog/coh901327_wdt.c
F: drivers/dma/coh901318*
+F: drivers/mfd/ab3100*
+F: drivers/rtc/rtc-ab3100.c
+F: drivers/rtc/rtc-coh901331.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
-ARM/U8500 ARM ARCHITECTURE
+ARM/Ux500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+M: Linus Walleij <linus.walleij@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ux500/
+F: drivers/dma/ste_dma40*
+F: drivers/mfd/ab3550*
+F: drivers/mfd/abx500*
+F: drivers/mfd/ab8500*
+F: drivers/mfd/stmpe*
+F: drivers/rtc/rtc-ab8500.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
BONDING DRIVER
M: Jay Vosburgh <fubar@us.ibm.com>
-L: bonding-devel@lists.sourceforge.net
+L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
F: drivers/net/bonding/
S: Supported
F: drivers/net/cxgb4vf/
+STMMAC ETHERNET DRIVER
+M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+L: netdev@vger.kernel.org
+W: http://www.stlinux.com
+S: Supported
+F: drivers/net/stmmac/
+
CYBERPRO FB DRIVER
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
DOCBOOK FOR DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
S: Maintained
+F: scripts/kernel-doc
DOCKING STATION DRIVER
M: Shaohua Li <shaohua.li@intel.com>
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
+T: quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
S: Maintained
F: Documentation/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
F: drivers/base/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Chris Wilson <chris@chris-wilson.co.uk>
-L: intel-gfx@lists.freedesktop.org
+L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
S: Supported
FRAMEBUFFER LAYER
L: linux-fbdev@vger.kernel.org
W: http://linux-fbdev.sourceforge.net/
+Q: http://patchwork.kernel.org/project/linux-fbdev/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
S: Orphan
F: Documentation/fb/
-F: drivers/video/fb*
+F: drivers/video/
+F: include/video/
F: include/linux/fb.h
FREESCALE DMA DRIVER
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
-M: Chien Tung <chien.tin.tung@intel.com>
L: linux-rdma@vger.kernel.org
-W: http://www.neteffect.com
+W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
S: Supported
F: drivers/infiniband/hw/nes/
F: include/pcmcia/
PCNET32 NETWORK DRIVER
-M: Don Fry <pcnet32@verizon.net>
+M: Don Fry <pcnet32@frontier.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pcnet32.c
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
Q: http://patchwork.kernel.org/project/linux-sh/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest
S: Supported
F: Documentation/sh/
F: arch/sh/
W: http://www.tilera.com/scm/
S: Supported
F: arch/tile/
+F: drivers/char/hvc_tile.c
+F: drivers/net/tile/
TLAN NETWORK DRIVER
M: Samuel Chessman <chessman@tux.org>
TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
-M: Kyle McMartin <kyle@mcmartin.ca>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
+WORKQUEUE
+M: Tejun Heo <tj@kernel.org>
+L: linux-kernel@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+S: Maintained
+F: include/linux/workqueue.h
+F: kernel/workqueue.c
+F: Documentation/workqueue.txt
+
X.25 NETWORK LAYER
M: Andrew Hendry <andrew.hendry@gmail.com>
L: linux-x25@vger.kernel.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc1
+EXTRAVERSION =
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
- select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_I2C if I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
- select HAVE_S3C2410_I2C
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S3C64XX series based systems
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5P6442 CPU based systems
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PC100 series based systems
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
- select HAVE_S3C_RTC
- select HAVE_S3C2410_I2C
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV310 series based systems
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode"
- depends on CPU_V7 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
config FPE_NWFPE
bool "NWFPE math emulation"
- depends on !AEABI || OABI_COMPAT
+ depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
---help---
Say Y to include the NWFPE floating point emulator in the kernel.
This is necessary to run most binaries. Linux does not currently
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
-$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
-else
$(obj)/uImage: STARTADDR=$(LOADADDR)
-endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
.size _start, . - _start
+ .align
+
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address
* sort out different calling conventions
*/
.align
+ .arm @ Always enter in ARM state
start:
.type start,#function
- .rept 8
+ THUMB( adr r12, BSYM(1f) )
+ THUMB( bx r12 )
+ THUMB( .rept 6 )
+ ARM( .rept 8 )
mov r0, r0
.endr
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
+ THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
- and r4, pc, #0xf8000000
+ mov r4, pc
+ and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
- mov r2, pc, lsr #20
+ mov r2, pc
+ mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
reloc_end:
.align
- .section ".stack", "w"
+ .section ".stack", "aw", %nobits
user_stack: .space 4096
user_stack_end:
.bss : { *(.bss) }
_end = .;
- .stack (NOLOAD) : { *(.stack) }
+ .stack : { *(.stack) }
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
+ struct irq_desc *desc;
spin_lock(&irq_controller_lock);
- irq_desc[irq].node = cpu;
+ desc = irq_to_desc(irq);
+ if (desc == NULL) {
+ spin_unlock(&irq_controller_lock);
+ return -EINVAL;
+ }
+ desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
- unsigned int max_irq, i;
+ unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
/*
* Find out how many interrupts are supported.
- */
- max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
- max_irq = (max_irq + 1) * 32;
-
- /*
* The GIC only supports up to 1020 interrupt sources.
- * Limit this to either the architected maximum, or the
- * platform maximum.
*/
- if (max_irq > max(1020, NR_IRQS))
- max_irq = max(1020, NR_IRQS);
+ gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
- for (i = 32; i < max_irq; i += 16)
+ for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
- for (i = 32; i < max_irq; i += 32)
+ for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+ /*
+ * Limit number of interrupts registered to the platform maximum
+ */
+ irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
+ if (WARN_ON(irq_limit > NR_IRQS))
+ irq_limit = NR_IRQS;
+
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+ for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
return pci_scan_bus(nr, &it8152_ops, sys);
}
+EXPORT_SYMBOL(dma_set_coherent_mask);
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m
+++ /dev/null
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
@ Slightly optimised to avoid incrementing the pointer twice
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
.if \rept == 2
- usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+ usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
.endif
add\cond \ptr, #\rept * \inc
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
+#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40)
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
extern void *kmap_high_get(struct page *page);
extern void kunmap_high(struct page *page);
-extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
-extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
-
/*
* The following functions are already defined by <linux/highmem.h>
* when CONFIG_HIGHMEM is not set.
#ifdef CONFIG_CPU_HAS_ASID
#define ASID(mm) ((mm)->context.id & 255)
+
+/* init_mm.context.id_lock should be initialized. */
+#define INIT_MM_CONTEXT(name) \
+ .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
#else
#define ASID(mm) (0)
#endif
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
/* handy sizes */
#define SZ_16 0x00000010
+#define SZ_32 0x00000020
+#define SZ_64 0x00000040
+#define SZ_128 0x00000080
#define SZ_256 0x00000100
#define SZ_512 0x00000200
#define rmb() dmb()
#define wmb() mb()
#else
+#include <asm/memory.h>
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
- ldr r7, =1f @ it's 20 bits
+ ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne fast_work_pending
+#if defined(CONFIG_IRQSOFF_TRACER)
+ asm_trace_hardirqs_on
+#endif
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
tst r1, #_TIF_WORK_MASK
bne work_pending
no_work_pending:
+#if defined(CONFIG_IRQSOFF_TRACER)
+ asm_trace_hardirqs_on
+#endif
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
+ .align
__enable_mmu_loc:
.long .
.long __enable_mmu
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
b secondary_start_kernel
ENDPROC(__secondary_switched)
+ .align
+
.type __secondary_data, %object
__secondary_data:
.long .
mov pc, lr
ENDPROC(__fixup_smp)
+ .align
1: .word .
.word __smpalt_begin
.word __smpalt_end
ldr r2,kexec_boot_atags
mov pc,lr
+ .align
+
.globl kexec_start_address
kexec_start_address:
.long 0x0
* All kernel threads share the same mm context; grab a
* reference and switch to it.
*/
- atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
*/
.L_found:
#if __LINUX_ARM_ARCH__ >= 5
- rsb r1, r3, #0
- and r3, r3, r1
+ rsb r0, r3, #0
+ and r3, r3, r0
clz r3, r3
rsb r3, r3, #31
add r0, r2, r3
addeq r2, r2, #1
mov r0, r2
#endif
+ cmp r1, r0 @ Clamp to maxbit
+ movlo r0, r1
mov pc, lr
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
+obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
- int i;
-
- /* Fill in list of supported UARTs */
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
- configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91rm9200_uart0_device;
- at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
- break;
- case 1:
- configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
- at91_uarts[i] = &at91rm9200_uart1_device;
- at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
- break;
- case 2:
- configure_usart2_pins(0);
- at91_uarts[i] = &at91rm9200_uart2_device;
- at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
- break;
- case 3:
- configure_usart3_pins(0);
- at91_uarts[i] = &at91rm9200_uart3_device;
- at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
- break;
- case 4:
- configure_dbgu_pins();
- at91_uarts[i] = &at91rm9200_dbgu_device;
- at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
- break;
- default:
- continue;
- }
- at91_uarts[i]->id = i; /* update ID number to mapped ID */
- }
-
- /* Set serial console device */
- if (config->console_tty < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[config->console_tty];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
-};
-
static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
- /* Setup the serial ports and console */
- at91_init_serial(&onearm_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-dk.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-static void __init dk_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init dk_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
- .det_pin = AT91_PIN_PB0,
- .rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
-};
-
-static struct at91_mmc_data __initdata dk_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
-};
-
-static struct spi_board_info dk_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
- { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
- .modalias = "ur6hcps2",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
- .modalias = "tlv1504",
- .chip_select = 2,
- .max_speed_hz = 20 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- }
-#endif
-};
-
-static struct i2c_board_info __initdata dk_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ics1523", 0x26),
- },
- {
- I2C_BOARD_INFO("x9429", 0x28),
- },
- {
- I2C_BOARD_INFO("24c1024", 0x50),
- }
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
- {
- .name = "NAND Partition 1",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(dk_nand_partition);
- return dk_nand_partition;
-}
-
-static struct atmel_nand_data __initdata dk_nand_data = {
- .ale = 22,
- .cle = 21,
- .det_pin = AT91_PIN_PB1,
- .rdy_pin = AT91_PIN_PC2,
- // .enable_pin = ... not there
- .partition_info = nand_partitions,
-};
-
-#define DK_FLASH_BASE AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE SZ_2M
-
-static struct physmap_flash_data dk_flash_data = {
- .width = 2,
-};
-
-static struct resource dk_flash_resource = {
- .start = DK_FLASH_BASE,
- .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &dk_flash_data,
- },
- .resource = &dk_flash_resource,
- .num_resources = 1,
-};
-
-static struct gpio_led dk_leds[] = {
- {
- .name = "led0",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init dk_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&dk_eth_data);
- /* USB Host */
- at91_add_device_usbh(&dk_usbh_data);
- /* USB Device */
- at91_add_device_udc(&dk_udc_data);
- at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* Compact Flash */
- at91_add_device_cf(&dk_cf_data);
- /* I2C */
- at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
- /* SPI */
- at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &dk_mmc_data);
-#endif
- /* NAND */
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
- /* LEDs */
- at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
- /* VGA */
-// dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
- /* Maintainer: SAN People/Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = dk_map_io,
- .init_irq = dk_init_irq,
- .init_machine = dk_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-ek.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-static void __init ek_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init ek_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
-};
-
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#endif
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ics1523", 0x26),
- },
- {
- I2C_BOARD_INFO("dac3550", 0x4d),
- }
-};
-
-#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE SZ_2M
-
-static struct physmap_flash_data ek_flash_data = {
- .width = 2,
-};
-
-static struct resource ek_flash_resource = {
- .start = EK_FLASH_BASE,
- .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ek_flash_data,
- },
- .resource = &ek_flash_resource,
- .num_resources = 1,
-};
-
-static struct gpio_led ek_leds[] = {
- { /* "user led 1", DS2 */
- .name = "green",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "user led 2", DS4 */
- .name = "yellow",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "user led 3", DS6 */
- .name = "red",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&ek_eth_data);
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &ek_mmc_data);
-#endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
-// ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
- /* Maintainer: SAN People/Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = ek_map_io,
- .init_irq = ek_init_irq,
- .init_machine = ek_board_init,
-MACHINE_END
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init kafa_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
- /* Setup the serial ports and console */
- at91_init_serial(&kafa_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
#include "sam9_smc.h"
#include "generic.h"
static void __init pcontrol_g20_map_io(void)
{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
- at91_register_uart(0, 0, 0);
+ stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
/* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
}
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
.tdf_cycles = 1,
} };
-static void __init add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &nand_smc_config);
- at91_add_device_nand(&nand_data);
-}
-
-
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
}
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- },
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
- .wire4 = 1,
-};
-#endif
-
-
/*
* USB Host port
*/
};
-/*
- * Dallas 1-Wire DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
- .pin = AT91_PIN_PA29,
- .is_open_drain = 1,
-};
-
-static struct platform_device w1_device = {
- .name = "w1-gpio",
- .id = -1,
- .dev.platform_data = &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
- at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
- at91_set_multi_drive(w1_gpio_pdata.pin, 1);
- platform_device_register(&w1_device);
-}
-
-
static void __init pcontrol_g20_board_init(void)
{
- at91_add_device_serial();
- add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
- at91_add_device_mci(0, &mmc_data);
-#else
- at91_add_device_mmc(0, &mmc_data);
-#endif
+ stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
at91_add_device_i2c(pcontrol_g20_i2c_devices,
ARRAY_SIZE(pcontrol_g20_i2c_devices));
- add_wire1();
add_device_pcontrol();
at91_add_device_spi(pcontrol_g20_spi_devices,
ARRAY_SIZE(pcontrol_g20_spi_devices));
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init picotux200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
- /* Setup the serial ports and console */
- at91_init_serial(&picotux200_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
.ports = 1,
};
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// .vbus_pin = AT91_PIN_PD4,
-// .pullup_pin = AT91_PIN_PD5,
-// };
-
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wp_pin = AT91_PIN_PA17,
};
-// static struct spi_board_info picotux200_spi_devices[] = {
-// { /* DataFlash chip */
-// .modalias = "mtd_dataflash",
-// .chip_select = 0,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// { /* DataFlash card */
-// .modalias = "mtd_dataflash",
-// .chip_select = 3,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #endif
-// };
-
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
- /* USB Device */
- // at91_add_device_udc(&picotux200_udc_data);
- // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
- /* SPI */
- // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+static void __init dk_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init dk_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata dk_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata dk_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata dk_cf_data = {
+ .det_pin = AT91_PIN_PB0,
+ .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+};
+
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
+static struct at91_mmc_data __initdata dk_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+};
+#endif
+
+static struct spi_board_info dk_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+ { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
+ .modalias = "ur6hcps2",
+ .chip_select = 1,
+ .max_speed_hz = 250 * 1000,
+ },
+ { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
+ .modalias = "tlv1504",
+ .chip_select = 2,
+ .max_speed_hz = 20 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ }
+#endif
+};
+
+static struct i2c_board_info __initdata dk_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("x9429", 0x28),
+ },
+ {
+ I2C_BOARD_INFO("24c1024", 0x50),
+ }
+};
+
+static struct mtd_partition __initdata dk_nand_partition[] = {
+ {
+ .name = "NAND Partition 1",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(dk_nand_partition);
+ return dk_nand_partition;
+}
+
+static struct atmel_nand_data __initdata dk_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ .det_pin = AT91_PIN_PB1,
+ .rdy_pin = AT91_PIN_PC2,
+ // .enable_pin = ... not there
+ .partition_info = nand_partitions,
+};
+
+#define DK_FLASH_BASE AT91_CHIPSELECT_0
+#define DK_FLASH_SIZE SZ_2M
+
+static struct physmap_flash_data dk_flash_data = {
+ .width = 2,
+};
+
+static struct resource dk_flash_resource = {
+ .start = DK_FLASH_BASE,
+ .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device dk_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &dk_flash_data,
+ },
+ .resource = &dk_flash_resource,
+ .num_resources = 1,
+};
+
+static struct gpio_led dk_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static void __init dk_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&dk_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&dk_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&dk_udc_data);
+ at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* Compact Flash */
+ at91_add_device_cf(&dk_cf_data);
+ /* I2C */
+ at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+ at91_set_gpio_output(AT91_PIN_PB7, 0);
+#else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(0, &dk_mmc_data);
+#endif
+ /* NAND */
+ at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
+ /* LEDs */
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
+ /* VGA */
+// dk_add_device_video();
+}
+
+MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+ /* Maintainer: SAN People/Atmel */
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = dk_map_io,
+ .init_irq = dk_init_irq,
+ .init_machine = dk_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .det_pin = AT91_PIN_PB27,
+ .slot_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PA17,
+};
+#endif
+
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#endif
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("dac3550", 0x4d),
+ }
+};
+
+#define EK_FLASH_BASE AT91_CHIPSELECT_0
+#define EK_FLASH_SIZE SZ_2M
+
+static struct physmap_flash_data ek_flash_data = {
+ .width = 2,
+};
+
+static struct resource ek_flash_resource = {
+ .start = EK_FLASH_BASE,
+ .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ek_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ek_flash_data,
+ },
+ .resource = &ek_flash_resource,
+ .num_resources = 1,
+};
+
+static struct gpio_led ek_leds[] = {
+ { /* "user led 1", DS2 */
+ .name = "green",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "user led 2", DS4 */
+ .name = "yellow",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 3", DS6 */
+ .name = "red",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ }
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&ek_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+ at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(0, &ek_mmc_data);
+#endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* VGA */
+// ek_add_device_video();
+}
+
+MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+ /* Maintainer: SAN People/Atmel */
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
#include "generic.h"
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+ stamp9g20_map_io();
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+ stamp9g20_map_io();
+
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
/* USART5 on ttyS6. (Rx, Tx only) */
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static void __init init_irq(void)
.pullup_pin = 0, /* pull-up driven by UDC */
};
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
};
}
};
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
{
.name = "D8",
.gpio = AT91_PIN_PB18,
}
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
{
/* Serial */
at91_add_device_serial();
#else
at91_add_device_mmc(0, &mmc_data);
#endif
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
/* W1 */
add_w1();
}
static void __init portuxg20_board_init(void)
{
- generic_board_init();
- /* SPI */
- at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
at91_add_device_udc(&portuxg20_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
/* LEDs */
at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
}
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
{
- generic_board_init();
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
- at91_add_device_udc(&stamp9g20_udc_data);
+ at91_add_device_udc(&stamp9g20evb_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
/* LEDs */
- at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+ at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
}
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = stamp9g20_map_io,
+ .map_io = stamp9g20evb_map_io,
.init_irq = init_irq,
- .init_machine = stamp9g20_board_init,
+ .init_machine = stamp9g20evb_board_init,
MACHINE_END
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz = utmi_clk.rate_hz;
uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
#define AT91_MCI_TRTYP_BLOCK (0 << 19)
#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
#define AT91_MCI_TRTYP_STREAM (2 << 19)
+#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19)
+#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19)
#define AT91_MCI_BLKR 0x18 /* Block Register */
#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern void __init at91_set_serial_console(unsigned portnr);
-struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
-};
extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
--- /dev/null
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
* 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
* larger physical memory designs better.
*/
-#define VMALLOC_END 0xf0000000
+#define VMALLOC_END 0xf0000000UL
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
{
int i;
- hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+ hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK("davinci-asp.0", NULL, &asp0_clk),
- CLK("davinci-asp.1", NULL, &asp1_clk),
+ CLK("davinci-mcbsp.0", NULL, &asp0_clk),
+ CLK("davinci-mcbsp.1", NULL, &asp1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
};
static struct platform_device dm355_asp1_device = {
- .name = "davinci-asp",
+ .name = "davinci-mcbsp",
.id = 1,
.num_resources = ARRAY_SIZE(dm355_asp1_resources),
.resource = dm355_asp1_resources,
CLK(NULL, "usb", &usb_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("davinci_voicecodec", NULL, &voicecodec_clk),
- CLK("davinci-asp.0", NULL, &asp0_clk),
+ CLK("davinci-mcbsp", NULL, &asp0_clk),
CLK(NULL, "rto", &rto_clk),
CLK(NULL, "mjcp", &mjcp_clk),
CLK(NULL, NULL, NULL),
};
static struct platform_device dm365_asp_device = {
- .name = "davinci-asp",
- .id = 0,
+ .name = "davinci-mcbsp",
+ .id = -1,
.num_resources = ARRAY_SIZE(dm365_asp_resources),
.resource = dm365_asp_resources,
};
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
- CLK("davinci-asp", NULL, &asp_clk),
+ CLK("davinci-mcbsp", NULL, &asp_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "spi", &spi_clk),
CLK(NULL, "gpio", &gpio_clk),
};
static struct platform_device dm644x_asp_device = {
- .name = "davinci-asp",
+ .name = "davinci-mcbsp",
.id = -1,
.num_resources = ARRAY_SIZE(dm644x_asp_resources),
.resource = dm644x_asp_resources,
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END 0xdf000000
+#define VMALLOC_END 0xdf000000UL
*/
-#define VMALLOC_END 0xf0000000
+#define VMALLOC_END 0xf0000000UL
#ifndef __ARCH_ARM_VMALLOC_H
#define __ARCH_ARM_VMALLOC_H
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
#endif
.flags = IMXUART_HAVE_RTSCTS,
};
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
- || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
#define ADS7846_PENDOWN (GPIO_PORTD | 25)
static void ads7846_dev_init(void)
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
};
-#endif
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
[0] = {
.modalias = "ads7846",
.chipselect = eukrea_mbimx27_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};
-#endif
static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
{
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);
-
+EXPORT_SYMBOL(dma_set_coherent_mask);
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
#ifndef __ASM_ARCH_MSM_VMALLOC_H
#define __ASM_ARCH_MSM_VMALLOC_H
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
#endif
#define imx25_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
#define imx25_add_spi_imx(id, pdata) \
- imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+ imx_add_spi_imx(&imx25_cspi_data[id], pdata)
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
#include <mach/common.h>
#include <mach/iomux-mx3.h>
+#include <mach/spi.h>
#include <asm/mach-types.h>
};
/* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
};
-#endif
/* GPIO-keys input device */
static struct gpio_keys_button pcm037_gpio_keys[] = {
},
};
-static int eet_init_devices(void)
+static int __init eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
return 0;
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
static int __init omap_init_wdt(void)
{
if (!cpu_is_omap16xx())
- return;
+ return -ENODEV;
- platform_device_register(&omap_wdt_device);
- return 0;
+ return platform_device_register(&omap_wdt_device);
}
subsys_initcall(omap_init_wdt);
#endif
#ifndef __ASM_ARCH_CAMERA_H_
#define __ASM_ARCH_CAMERA_H_
+#include <media/omap1_camera.h>
+
void omap1_camera_init(void *);
static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd8000000
+#define VMALLOC_END 0xd8000000UL
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
{
.name = "wl1271",
.mmc = 3,
- .caps = MMC_CAP_4_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xf8000000
+#define VMALLOC_END 0xf8000000UL
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
- if (!dpll3_m2_ck)
+ if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+ u32 tick_rate, cycles;
+
+ if (!seconds && !milliseconds)
+ return;
+
+ tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+ omap_dm_timer_stop(gptimer_wakeup);
+ omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
+}
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
pwrdm->timer = t;
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
+#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
if (omap_irq_pending())
goto no_sleep;
+ /* Block console output in case it is on one of the OMAP UARTs */
+ if (!is_suspending())
+ if (try_acquire_console_sem())
+ goto no_sleep;
+
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
+ if (!is_suspending())
+ release_console_sem();
+
no_sleep:
if (omap2_pm_debug) {
unsigned long long tmp;
local_irq_enable();
}
+static int omap2_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ return 0;
+}
+
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
enable_hlt();
}
+static void omap2_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
+ .end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/console.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
#include "sdrc.h"
#include "control.h"
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
omap3_enable_io_chain();
}
+ /* Block console output in case it is on one of the OMAP UARTs */
+ if (!is_suspending())
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON)
+ if (try_acquire_console_sem())
+ goto console_still_active;
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
omap_uart_resume_idle(3);
}
+ if (!is_suspending())
+ release_console_sem();
+
+console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
}
#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
static int omap3_pm_prepare(void)
{
disable_hlt();
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK 2
-#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
-#define OMAP24XX_ST_GPT1_MASK 0
+#define OMAP24XX_ST_GPIOS_SHIFT 2
+#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT 0
+#define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT 0
+#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
#include <linux/slab.h>
#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
+#include <linux/console.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num) {
+ if (num == uart->num && uart->can_sleep) {
omap_uart_enable_clocks(uart);
/* Check for IO pad wakeup */
oh->dev_attr = uart;
+ acquire_console_sem(); /* in case the earlycon is on the UART */
+
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
+ release_console_sem();
+
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
+ select FB_W100
config MACH_E330
bool "Toshiba e330"
/******************************************************************************
* NAND Flash
******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
@ Let us ensure we jump to resume_after_mmu only when the mcr above
@ actually took effect. They call it the "cpwait" operation.
- mrc p15, 0, r1, c2, c0, 0 @ queue a dependency on CP15
- sub pc, r2, r1, lsr #32 @ jump to virtual addr
+ mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15
+ sub pc, r2, r0, lsr #32 @ jump to virtual addr
nop
nop
nop
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END 0xdc000000
+#define VMALLOC_END 0xdc000000UL
/* Configures BT serial port GPIOs */
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
- s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
- s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
- s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
config S3C2412_PM
bool
+ select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2412 power management
+config S3C2412_PM_SLEEP
+ bool
+ help
+ Internal config node to apply sleep for S3C2412 power management.
+ Can be selected by another SoCs with similar sleep procedure.
+
# Note, the S3C2412 IOtiming support is in plat-s3c24xx
config S3C2412_CPUFREQ
obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
-obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2412_PM) += pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
config S3C2416_PM
bool
+ select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2416 power management
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
+ select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
- s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+ s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2416_irq_uart3_mask(unsigned int irqno)
{
config CPU_S3C2442
bool
select CPU_ARM920T
+ select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
{
printk("S3C2440: Initialising architecture\n");
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
return sysdev_register(&s3c2440_sysdev);
}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
/* S3C2442 extended clock support */
return sysdev_register(&s3c2442_sysdev);
}
+
+void __init s3c2442_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}
config CPU_S3C2443
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
- s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+ s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2443_irq_uart3_mask(unsigned int irqno)
{
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
#include <video/platform_lcd.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
#include <video/platform_lcd.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct max8998_platform_data aquila_max8998_pdata = {
.num_regulators = ARRAY_SIZE(aquila_regulators),
.regulators = aquila_regulators,
+ .buck1_set1 = S5PV210_GPH0(3),
+ .buck1_set2 = S5PV210_GPH0(4),
+ .buck2_set3 = S5PV210_GPH0(5),
+ .buck1_max_voltage1 = 1200000,
+ .buck1_max_voltage2 = 1200000,
+ .buck2_max_voltage = 1200000,
};
#endif
static struct max8998_platform_data goni_max8998_pdata = {
.num_regulators = ARRAY_SIZE(goni_regulators),
.regulators = goni_regulators,
+ .buck1_set1 = S5PV210_GPH0(3),
+ .buck1_set2 = S5PV210_GPH0(4),
+ .buck2_set3 = S5PV210_GPH0(5),
+ .buck1_max_voltage1 = 1200000,
+ .buck1_max_voltage2 = 1200000,
+ .buck2_max_voltage = 1200000,
};
#endif
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
+#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
/*
* arch/arm/mach-shark/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
.name = "loader",
.offset = 0x00000000,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "bootenv",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel_ro",
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+ int ret = 0;
+
+ if (rate <= 0)
+ return ret;
+
+ if (enable) {
+ ret = clk_set_rate(clk, rate);
+ if (0 == ret)
+ ret = clk_enable(clk);
+ } else {
+ clk_disable(clk);
+ }
+
+ return ret;
+}
-static int fsi_set_rate(int is_porta, int rate)
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+ return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
+
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+ struct clk *fsia_ick;
+ struct clk *fsiack;
+ int ret = -EIO;
+
+ fsia_ick = clk_get(dev, "icka");
+ if (IS_ERR(fsia_ick))
+ return PTR_ERR(fsia_ick);
+
+ /*
+ * FSIACK is connected to AK4642,
+ * and use external clock pin from it.
+ * it is parent of fsia_ick now.
+ */
+ fsiack = clk_get_parent(fsia_ick);
+ if (!fsiack)
+ goto fsia_ick_out;
+
+ /*
+ * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+ *
+ ** FIXME **
+ * Because the freq_table of external clk (fsiack) are all 0,
+ * the return value of clk_round_rate became 0.
+ * So, it use __fsi_set_rate here.
+ */
+ ret = __fsi_set_rate(fsiack, rate, enable);
+ if (ret < 0)
+ goto fsiack_out;
+
+ ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+ if ((ret < 0) && enable)
+ __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+ clk_put(fsiack);
+
+fsia_ick_out:
+ clk_put(fsia_ick);
+
+ return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
{
struct clk *fsib_clk;
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+ long fsib_rate = 0;
+ long fdiv_rate = 0;
+ int ackmd_bpfmd;
int ret;
- /* set_rate is not needed if port A */
- if (is_porta)
- return 0;
-
- fsib_clk = clk_get(NULL, "fsib_clk");
- if (IS_ERR(fsib_clk))
- return -EINVAL;
-
switch (rate) {
+ case 44100:
+ fsib_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
case 48000:
- clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
- clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
- ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
+ fdiv_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
default:
pr_err("unsupported rate in FSI2 port B\n");
- ret = -EINVAL;
- break;
+ return -EINVAL;
}
+ /* FSI B setting */
+ fsib_clk = clk_get(dev, "ickb");
+ if (IS_ERR(fsib_clk))
+ return -EIO;
+
+ ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
clk_put(fsib_clk);
+ if (ret < 0)
+ return ret;
+
+ /* FSI DIV setting */
+ ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+ if (ret < 0) {
+ /* disable FSI B */
+ if (enable)
+ __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+ return ret;
+ }
+
+ return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+ int ret;
+
+ if (is_porta)
+ ret = fsi_ak4642_set_rate(dev, rate, enable);
+ else
+ ret = fsi_hdmi_set_rate(dev, rate, enable);
return ret;
}
goto out;
}
+ ret = clk_enable(&sh7372_pllc2_clk);
+ if (ret < 0) {
+ pr_err("Cannot enable pllc2 clock\n");
+ goto out;
+ }
pr_debug("PLLC2 set frequency %lu\n", rate);
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
device_initcall(hdmi_init_pm_clock);
-#define FSIACK_DUMMY_RATE 48000
static int __init fsi_init_pm_clock(void)
{
struct clk *fsia_ick;
int ret;
- /*
- * FSIACK is connected to AK4642,
- * and the rate is depend on playing sound rate.
- * So, set dummy rate (= 48k) here
- */
- ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
- if (ret < 0) {
- pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
- return ret;
- }
-
fsia_ick = clk_get(&fsi_device.dev, "icka");
if (IS_ERR(fsia_ick)) {
ret = PTR_ERR(fsia_ick);
}
ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
- if (ret < 0) {
- pr_err("Cannot set FSI-A parent: %d\n", ret);
- goto out;
- }
-
- ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
if (ret < 0)
- pr_err("Cannot set FSI-A rate: %d\n", ret);
+ pr_err("Cannot set FSI-A parent: %d\n", ret);
-out:
clk_put(fsia_ick);
return ret;
__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
}
-static int pllc2_set_rate(struct clk *clk,
- unsigned long rate, int algo_id)
+static int pllc2_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long value;
int idx;
if (idx < 0)
return idx;
- if (rate == clk->parent->rate) {
- pllc2_disable(clk);
- return 0;
- }
+ if (rate == clk->parent->rate)
+ return -EINVAL;
value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
- if (value & 0x80000000)
- pllc2_disable(clk);
-
__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
- if (value & 0x80000000)
- return pllc2_enable(clk);
-
return 0;
}
unsigned long value;
value = __raw_readl(clk->mapping->base) >> 16;
- if (value < 2) {
- fsidiv_disable(clk);
- return -ENOENT;
- }
+ if (value < 2)
+ return -EIO;
__raw_writel((value << 16) | 0x3, clk->mapping->base);
return 0;
}
-static int fsidiv_set_rate(struct clk *clk,
- unsigned long rate, int algo_id)
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
{
int idx;
- if (clk->parent->rate == rate) {
- fsidiv_disable(clk);
- return 0;
- }
-
idx = (clk->parent->rate / rate) & 0xffff;
if (idx < 2)
- return -ENOENT;
+ return -EINVAL;
__raw_writel(idx << 16, clk->mapping->base);
- return fsidiv_enable(clk);
+ return 0;
}
static struct clk_ops fsidiv_clk_ops = {
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
- CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
- CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
- CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
- CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
/*
+ * Copyright (C) 2010 Magnus Damm
* Copyright (C) 2008 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <mach/hardware.h>
#include <mach/irqs.h>
+#define INTCA_BASE 0xe6980000
+#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */
+#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */
+#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */
+#define INTLVLB_OFFS 0x00000034 /* previous priority level */
+
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =INTFLGA
+ ldr \base, =INTCA_BASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base]
+ /* The single INTFLGA read access below results in the following:
+ *
+ * 1. INTLVLB is updated with old priority value from INTLVLA
+ * 2. Highest priority interrupt is accepted
+ * 3. INTLVLA is updated to contain priority of accepted interrupt
+ * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
+ */
+ ldr \irqnr, [\base, #INTFLGA_OFFS]
+
+ /* Restore INTLVLA with the value saved in INTLVLB.
+ * This is required to support interrupt priorities properly.
+ */
+ ldrb \tmp, [\base, #INTLVLB_OFFS]
+ strb \tmp, [\base, #INTLVLA_OFFS]
+
+ /* Handle invalid vector number case */
cmp \irqnr, #0
beq 1000f
- /* intevt to irq number */
+
+ /* Convert vector to irq number, same as the evt2irq() macro */
lsr \irqnr, \irqnr, #0x5
subs \irqnr, \irqnr, #16
#define __ASM_MACH_VMALLOC_H
/* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000
+#define VMALLOC_END 0xe6000000UL
#endif /* __ASM_MACH_VMALLOC_H */
INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+ INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
#include <mach/io.h>
.macro addruart, rp, rv
- ldreq \rp, =IO_APB_PHYS @ physical
- ldrne \rv, =IO_APB_VIRT @ virtual
+ ldr \rp, =IO_APB_PHYS @ physical
+ ldr \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
{
/* wait for the operation to complete */
- while (readl(reg) & mask)
+ while (readl_relaxed(reg) & mask)
;
}
static inline void ux500_cache_sync(void)
{
void __iomem *base = __io_address(UX500_L2CC_BASE);
- writel(0, base + L2X0_CACHE_SYNC);
+ writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
- writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd8000000
+#define VMALLOC_END 0xd8000000UL
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
*/
#include <linux/init.h>
+#include <linux/highmem.h>
#include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
#include <plat/cache-feroceon-l2.h>
-#include "mm.h"
/*
* Low-level cache maintenance operations.
* between which we don't want to be preempted.
*/
-static inline unsigned long l2_start_va(unsigned long paddr)
+static inline unsigned long l2_get_va(unsigned long paddr)
{
#ifdef CONFIG_HIGHMEM
/*
- * Let's do our own fixmap stuff in a minimal way here.
* Because range ops can't be done on physical addresses,
* we simply install a virtual mapping for it only for the
* TLB lookup to occur, hence no need to flush the untouched
- * memory mapping. This is protected with the disabling of
- * interrupts by the caller.
+ * memory mapping afterwards (note: a cache flush may happen
+ * in some circumstances depending on the path taken in kunmap_atomic).
*/
- unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
- unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
- local_flush_tlb_kernel_page(vaddr);
- return vaddr + (paddr & ~PAGE_MASK);
+ void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT);
+ return (unsigned long)vaddr + (paddr & ~PAGE_MASK);
#else
return __phys_to_virt(paddr);
#endif
}
+static inline void l2_put_va(unsigned long vaddr)
+{
+#ifdef CONFIG_HIGHMEM
+ kunmap_atomic((void *)vaddr);
+#endif
+}
+
static inline void l2_clean_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
*/
BUG_ON((start ^ end) >> PAGE_SHIFT);
- raw_local_irq_save(flags);
- va_start = l2_start_va(start);
+ va_start = l2_get_va(start);
va_end = va_start + (end - start);
+ raw_local_irq_save(flags);
__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
"mcr p15, 1, %1, c15, c9, 5"
: : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
+ l2_put_va(va_start);
}
static inline void l2_clean_inv_pa(unsigned long addr)
*/
BUG_ON((start ^ end) >> PAGE_SHIFT);
- raw_local_irq_save(flags);
- va_start = l2_start_va(start);
+ va_start = l2_get_va(start);
va_end = va_start + (end - start);
+ raw_local_irq_save(flags);
__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
"mcr p15, 1, %1, c15, c11, 5"
: : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
+ l2_put_va(va_start);
}
static inline void l2_inv_all(void)
* - end - virtual end address of region
*/
v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
+#endif
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
#endif
tst r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrneb r2, [r1, #-1] @ read for ownership
+ strneb r2, [r1, #-1] @ write for ownership
+#endif
bic r1, r1, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
#endif
1:
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
-#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
#else
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlo r2, [r0] @ read for ownership
+ strlo r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
* - end - virtual end address of region
*/
ENTRY(v6_dma_flush_range)
- bic r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
#endif
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
#else
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlob r2, [r0] @ read for ownership
+ strlob r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
- bic r0, r0, r3
+ bic r12, r0, r3
1:
- USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
+ USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
+ add r12, r12, r2
+ cmp r12, r1
+ blo 1b
dsb
- USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
- add r0, r0, r2
+ icache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
2:
- cmp r0, r1
- blo 1b
+ USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line
+ add r12, r12, r2
+ cmp r12, r1
+ blo 2b
+3:
mov r0, #0
ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable
ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB
* isn't mapped, just try the next page.
*/
9001:
- mov r0, r0, lsr #12
- mov r0, r0, lsl #12
- add r0, r0, #4096
- b 2b
+ mov r12, r12, lsr #12
+ mov r12, r12, lsl #12
+ add r12, r12, #4096
+ b 3b
UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
+#include <linux/highmem.h>
#include <asm/system.h>
#include <asm/cputype.h>
#include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include "mm.h"
#define CR_L2 (1 << 26)
dsb();
}
+static inline void l2_unmap_va(unsigned long va)
+{
#ifdef CONFIG_HIGHMEM
-#define l2_map_save_flags(x) raw_local_save_flags(x)
-#define l2_map_restore_flags(x) raw_local_irq_restore(x)
-#else
-#define l2_map_save_flags(x) ((x) = 0)
-#define l2_map_restore_flags(x) ((void)(x))
+ if (va != -1)
+ kunmap_atomic((void *)va);
#endif
+}
-static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
- unsigned long flags)
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
{
#ifdef CONFIG_HIGHMEM
unsigned long va = prev_va & PAGE_MASK;
/*
* Switching to a new page. Because cache ops are
* using virtual addresses only, we must put a mapping
- * in place for it. We also enable interrupts for a
- * short while and disable them again to protect this
- * mapping.
+ * in place for it.
*/
- unsigned long idx;
- raw_local_irq_restore(flags);
- idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
- va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- raw_local_irq_restore(flags | PSR_I_BIT);
- set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
- local_flush_tlb_kernel_page(va);
+ l2_unmap_va(prev_va);
+ va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
}
return va + (pa_offset >> (32 - PAGE_SHIFT));
#else
static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
{
- unsigned long vaddr, flags;
+ unsigned long vaddr;
if (start == 0 && end == -1ul) {
xsc3_l2_inv_all();
}
vaddr = -1; /* to force the first mapping */
- l2_map_save_flags(flags);
/*
* Clean and invalidate partial first cache line.
*/
if (start & (CACHE_LINE_SIZE - 1)) {
- vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+ vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
start = (start | (CACHE_LINE_SIZE - 1)) + 1;
* Invalidate all full cache lines between 'start' and 'end'.
*/
while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
* Clean and invalidate partial last cache line.
*/
if (start < end) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
}
- l2_map_restore_flags(flags);
+ l2_unmap_va(vaddr);
dsb();
}
static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
{
- unsigned long vaddr, flags;
+ unsigned long vaddr;
vaddr = -1; /* to force the first mapping */
- l2_map_save_flags(flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
start += CACHE_LINE_SIZE;
}
- l2_map_restore_flags(flags);
+ l2_unmap_va(vaddr);
dsb();
}
static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
{
- unsigned long vaddr, flags;
+ unsigned long vaddr;
if (start == 0 && end == -1ul) {
xsc3_l2_flush_all();
}
vaddr = -1; /* to force the first mapping */
- l2_map_save_flags(flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
- l2_map_restore_flags(flags);
+ l2_unmap_va(vaddr);
dsb();
}
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
#include <asm/memory.h>
#include <asm/highmem.h>
op(vaddr, len, dir);
kunmap_high(page);
} else if (cache_is_vipt()) {
- pte_t saved_pte;
- vaddr = kmap_high_l1_vipt(page, &saved_pte);
+ /* unmapped pages might still be cached */
+ vaddr = kmap_atomic(page);
op(vaddr + offset, len, dir);
- kunmap_high_l1_vipt(page, saved_pte);
+ kunmap_atomic(vaddr);
}
} else {
vaddr = page_address(page) + offset;
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
+#include <linux/highmem.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_high(page);
} else if (cache_is_vipt()) {
- pte_t saved_pte;
- addr = kmap_high_l1_vipt(page, &saved_pte);
+ /* unmapped pages might still be cached */
+ addr = kmap_atomic(page);
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
- kunmap_high_l1_vipt(page, saved_pte);
+ kunmap_atomic(addr);
}
}
pte = TOP_PTE(vaddr);
return pte_page(*pte);
}
-
-#ifdef CONFIG_CPU_CACHE_VIPT
-
-#include <linux/percpu.h>
-
-/*
- * The VIVT cache of a highmem page is always flushed before the page
- * is unmapped. Hence unmapped highmem pages need no cache maintenance
- * in that case.
- *
- * However unmapped pages may still be cached with a VIPT cache, and
- * it is not possible to perform cache maintenance on them using physical
- * addresses unfortunately. So we have no choice but to set up a temporary
- * virtual mapping for that purpose.
- *
- * Yet this VIPT cache maintenance may be triggered from DMA support
- * functions which are possibly called from interrupt context. As we don't
- * want to keep interrupt disabled all the time when such maintenance is
- * taking place, we therefore allow for some reentrancy by preserving and
- * restoring the previous fixmap entry before the interrupted context is
- * resumed. If the reentrancy depth is 0 then there is no need to restore
- * the previous fixmap, and leaving the current one in place allow it to
- * be reused the next time without a TLB flush (common with DMA).
- */
-
-static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
-
-void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
-{
- unsigned int idx, cpu;
- int *depth;
- unsigned long vaddr, flags;
- pte_t pte, *ptep;
-
- if (!in_interrupt())
- preempt_disable();
-
- cpu = smp_processor_id();
- depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
-
- idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- ptep = TOP_PTE(vaddr);
- pte = mk_pte(page, kmap_prot);
-
- raw_local_irq_save(flags);
- (*depth)++;
- if (pte_val(*ptep) == pte_val(pte)) {
- *saved_pte = pte;
- } else {
- *saved_pte = *ptep;
- set_pte_ext(ptep, pte, 0);
- local_flush_tlb_kernel_page(vaddr);
- }
- raw_local_irq_restore(flags);
-
- return (void *)vaddr;
-}
-
-void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
-{
- unsigned int idx, cpu = smp_processor_id();
- int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
- unsigned long vaddr, flags;
- pte_t pte, *ptep;
-
- idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- ptep = TOP_PTE(vaddr);
- pte = mk_pte(page, kmap_prot);
-
- BUG_ON(pte_val(*ptep) != pte_val(pte));
- BUG_ON(*depth <= 0);
-
- raw_local_irq_save(flags);
- (*depth)--;
- if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
- set_pte_ext(ptep, saved_pte, 0);
- local_flush_tlb_kernel_page(vaddr);
- }
- raw_local_irq_restore(flags);
-
- if (!in_interrupt())
- preempt_enable();
-}
-
-#endif /* CONFIG_CPU_CACHE_VIPT */
*/
if (pfn_valid(pfn)) {
printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
- KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
- KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
+ "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+ "will fail in the next kernel release. Please fix your driver.\n");
WARN_ON(1);
}
.endm
/*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
*/
.macro dcache_line_size, reg, tmp
- mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR
- and \tmp, \tmp, #7 @ cache line size encoding
- mov \reg, #16 @ size offset
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ lsr \tmp, \tmp, #16
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro icache_line_size, reg, tmp
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
/*
* Sanity check the PTE configuration for the code below - which makes
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_ca9mp_setup
+ W(b) __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_setup
+ W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
+#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
/*
* IOP clocksource (free-running timer 1).
*/
-static cycle_t iop_clocksource_read(struct clocksource *unused)
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
{
return 0xffffffffu - read_tcr1();
}
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#ifdef SDMA_IS_MERGED
#include <mach/sdma.h>
-#else
-struct sdma_platform_data {
- int sdma_version;
- char *cpu_name;
- int to_version;
-};
-#endif
struct imx_imx_sdma_data {
resource_size_t iobase;
imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
imx21_cspi_data_entry(0, 1),
imx21_cspi_data_entry(1, 2),
+};
#endif
#ifdef CONFIG_ARCH_MX25
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
-void __iomem *mtu_base; /* ssigned by machine code */
+void __iomem *mtu_base; /* Assigned by machine code */
/*
* Kernel assumes that sched_clock can be called early
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
+ * better resolution when scheduling the kernel.
+ *
+ * Because the hardware timer period may be quite short
+ * (32.3 secs on the 133 MHz MTU timer selection on ux500)
+ * and because cnt32_to_63() needs to be called at least once per
+ * half period to work properly, a kernel keepwarm() timer is set up
+ * to ensure this requirement is always met.
+ *
+ * Also the sched_clock timer will wrap around at some point,
+ * here we set it to run continously for a year.
*/
+#define SCHED_CLOCK_MIN_WRAP 3600*24*365
+static struct timer_list cnt32_to_63_keepwarm_timer;
+static u32 sched_mult;
+static u32 sched_shift;
+
unsigned long long notrace sched_clock(void)
{
- return clocksource_cyc2ns(nmdk_clksrc.read(
- &nmdk_clksrc),
- nmdk_clksrc.mult,
- nmdk_clksrc.shift);
+ u64 cycles;
+
+ if (unlikely(!mtu_base))
+ return 0;
+
+ cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
+ /*
+ * sched_mult is guaranteed to be even so will
+ * shift out bit 63
+ */
+ return (cycles * sched_mult) >> sched_shift;
+}
+
+/* Just kick sched_clock every so often */
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+ (void) sched_clock();
+}
+
+/*
+ * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
+ * once in half a 32bit timer wrap interval.
+ */
+static void __init nmdk_sched_clock_init(unsigned long rate)
+{
+ u32 v;
+ unsigned long delta;
+ u64 days;
+
+ /* Find the apropriate mult and shift factors */
+ clocks_calc_mult_shift(&sched_mult, &sched_shift,
+ rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
+ /* We need to multiply by an even number to get rid of bit 63 */
+ if (sched_mult & 1)
+ sched_mult++;
+
+ /* Let's see what we get, take max counter and scale it */
+ days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
+ do_div(days, NSEC_PER_SEC);
+ do_div(days, (3600*24));
+
+ pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
+ (64 - sched_shift), rate, (unsigned long) days);
+
+ /*
+ * Program a timer to kick us at half 32bit wraparound
+ * Formula: seconds per wrap = (2^32) / f
+ */
+ v = 0xFFFFFFFFUL / rate;
+ /* We want half of the wrap time to keep cnt32_to_63 warm */
+ v /= 2;
+ pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
+ "initialize keepwarm timer every %d seconds\n", rate, v);
+ /* Convert seconds to jiffies */
+ delta = msecs_to_jiffies(v*1000);
+ setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
}
/* Clockevent device: use one-shot mode */
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
- /* Now the scheduling clock is ready */
+ /* Now the clock source is ready */
nmdk_clksrc.read = nmdk_read_timer;
if (clocksource_register(&nmdk_clksrc))
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
+ nmdk_sched_clock_init(rate);
+
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/err.h>
#include <plat/common.h>
#include <plat/board.h>
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
- if (sync_32k_ick)
+ if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
dma_write(1 << ch, IRQSTATUS_L0);
+ /* read back the register to flush the write */
+ dma_read(IRQSTATUS_L0);
/* If the ch is not chained then chain_id will be -1 */
if (dma_chan[ch].chain_id != -1) {
cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
- omap_sram_size = 0x3e800; /* 250K */
+ omap_sram_size = SZ_256K;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
/* Require clock free running */
#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
/*
* struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
* @max_speed: the maximum speed supported
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
- select S3C_DEVICE_NAND
+ select S3C_DEV_NAND
select S3C_GPIO_CFG_S3C24XX
help
Base platform code for any Samsung S3C24XX device
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_1up,
- .get_pull = s3c_gpio_getpull_1up,
};
struct s3c_gpio_chip s3c24xx_gpios[] = {
#else
#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
#else
#define s3c2440_init NULL
+#define s3c2440_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
#else
#define s3c2442_init NULL
+#define s3c2442_map_io NULL
#endif
} else {
s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
}
}
} else {
s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
}
}
} else {
s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
}
}
}
#endif
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
+#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
+static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull,
+ s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
- pup = __raw_readl(reg);
-
- if (pup == S3C_GPIO_PULL_UP)
+ if (pull == updown)
pup &= ~(1 << off);
- else if (pup == S3C_GPIO_PULL_NONE)
+ else if (pull == S3C_GPIO_PULL_NONE)
pup |= (1 << off);
else
return -EINVAL;
return 0;
}
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off)
+static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S3C_GPIO_PULL_DOWN
+s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
+
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
unsigned int off);
+/**
+ * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1down.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
/**
* s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
u380 MACH_U380 U380 2333
oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
npcmx50 MACH_NPCMX50 NPCMX50 2335
-mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336
mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
riom MACH_RIOM RIOM 2338
comcas MACH_COMCAS COMCAS 2339
csb732 MACH_CSB732 CSB732 2367
u8500 MACH_U8500 U8500 2368
huqiu MACH_HUQIU HUQIU 2369
-mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370
pmt1g MACH_PMT1G PMT1G 2371
htcelf MACH_HTCELF HTCELF 2372
armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
wasabi MACH_WASABI WASABI 2986
vivow MACH_VIVOW VIVOW 2987
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
-universal MACH_UNIVERSAL UNIVERSAL 2989
+universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
+rdstor MACH_RDSTOR RDSTOR 3063
+usdloader MACH_USDLOADER USDLOADER 3064
+tsoploader MACH_TSOPLOADER TSOPLOADER 3065
+kronos MACH_KRONOS KRONOS 3066
+ffcore MACH_FFCORE FFCORE 3067
+mone MACH_MONE MONE 3068
+unit2s MACH_UNIT2S UNIT2S 3069
+acer_a5 MACH_ACER_A5 ACER_A5 3070
+etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
+stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
+p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
+tulip MACH_TULIP TULIP 3074
+sunflower MACH_SUNFLOWER SUNFLOWER 3075
+rib MACH_RIB RIB 3076
+clod MACH_CLOD CLOD 3077
+rump MACH_RUMP RUMP 3078
+tenderloin MACH_TENDERLOIN TENDERLOIN 3079
+shortloin MACH_SHORTLOIN SHORTLOIN 3080
+crespo MACH_CRESPO CRESPO 3081
+antares MACH_ANTARES ANTARES 3082
+wb40n MACH_WB40N WB40N 3083
+herring MACH_HERRING HERRING 3084
+naxy400 MACH_NAXY400 NAXY400 3085
+naxy1200 MACH_NAXY1200 NAXY1200 3086
+vpr200 MACH_VPR200 VPR200 3087
+bug20 MACH_BUG20 BUG20 3088
+goflexnet MACH_GOFLEXNET GOFLEXNET 3089
+torbreck MACH_TORBRECK TORBRECK 3090
+saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
+callisto MACH_CALLISTO CALLISTO 3092
+multhsu MACH_MULTHSU MULTHSU 3093
+saluda MACH_SALUDA SALUDA 3094
+pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
+vc0718 MACH_VC0718 VC0718 3096
+mvblx MACH_MVBLX MVBLX 3097
+inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
+inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
+inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
+hdnvp MACH_HDNVP HDNVP 3101
+softwinner MACH_SOFTWINNER SOFTWINNER 3102
+prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
+nas6210 MACH_NAS6210 NAS6210 3104
+unisdev MACH_UNISDEV UNISDEV 3105
+sbca11 MACH_SBCA11 SBCA11 3106
+saga MACH_SAGA SAGA 3107
+ns_k330 MACH_NS_K330 NS_K330 3108
+tanna MACH_TANNA TANNA 3109
+imate8502 MACH_IMATE8502 IMATE8502 3110
+aspen MACH_ASPEN ASPEN 3111
+daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
+zmx25 MACH_ZMX25 ZMX25 3113
+maple1 MACH_MAPLE1 MAPLE1 3114
+qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
+qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
+abilene MACH_ABILENE ABILENE 3117
+eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
+iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
+coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
+santiago MACH_SANTIAGO SANTIAGO 3121
+mx257sol MACH_MX257SOL MX257SOL 3122
+strasbourg MACH_STRASBOURG STRASBOURG 3123
+msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
+smartqv5 MACH_SMARTQV5 SMARTQV5 3125
+smartqv3 MACH_SMARTQV3 SMARTQV3 3126
+smartqv7 MACH_SMARTQV7 SMARTQV7 3127
+paz00 MACH_PAZ00 PAZ00 3128
+acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
+htcwillow MACH_HTCWILLOW HTCWILLOW 3130
+fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
+hdgu MACH_HDGU HDGU 3132
+pyramid MACH_PYRAMID PYRAMID 3133
+epiphan MACH_EPIPHAN EPIPHAN 3134
+omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
+gurnard MACH_GURNARD GURNARD 3136
+gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
+bcm2708 MACH_BCM2708 BCM2708 3138
+mx51_ggc MACH_MX51_GGC MX51_GGC 3139
+sharespace MACH_SHARESPACE SHARESPACE 3140
+haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
+simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
+crux MACH_CRUX CRUX 3143
+mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
+charon MACH_CHARON CHARON 3145
+picocom3 MACH_PICOCOM3 PICOCOM3 3146
+picocom4 MACH_PICOCOM4 PICOCOM4 3147
+serrano MACH_SERRANO SERRANO 3148
+doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
+evsy MACH_EVSY EVSY 3150
+huashan MACH_HUASHAN HUASHAN 3151
+lausanne MACH_LAUSANNE LAUSANNE 3152
+emerald MACH_EMERALD EMERALD 3153
+tqma35 MACH_TQMA35 TQMA35 3154
+marvel MACH_MARVEL MARVEL 3155
+manuae MACH_MANUAE MANUAE 3156
+chacha MACH_CHACHA CHACHA 3157
+lemon MACH_LEMON LEMON 3158
+csc MACH_CSC CSC 3159
+gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
+t20 MACH_T20 T20 3161
+hdmini MACH_HDMINI HDMINI 3162
+sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
+express MACH_EXPRESS EXPRESS 3164
+express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
+maximasp MACH_MAXIMASP MAXIMASP 3166
+nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
+nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
+sunfire MACH_SUNFIRE SUNFIRE 3169
+arowana MACH_AROWANA AROWANA 3170
+tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
+tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
+edison MACH_EDISON EDISON 3173
+svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
+svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
+svp5500 MACH_SVP5500 SVP5500 3176
+b5500 MACH_B5500 B5500 3177
+s5500 MACH_S5500 S5500 3178
+icon MACH_ICON ICON 3179
+elephant MACH_ELEPHANT ELEPHANT 3180
+msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181
+shooter MACH_SHOOTER SHOOTER 3182
+spade_lte MACH_SPADE_LTE SPADE_LTE 3183
+philhwani MACH_PHILHWANI PHILHWANI 3184
+gsncomm MACH_GSNCOMM GSNCOMM 3185
+strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
+mmm MACH_MMM MMM 3187
+davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
+ag5evm MACH_AG5EVM AG5EVM 3189
+sc575plc MACH_SC575PLC SC575PLC 3190
+sc575hmi MACH_SC575IPC SC575IPC 3191
+omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
+g7 MACH_G7 G7 3193
+top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
+top9000_su MACH_TOP9000_SU TOP9000_SU 3195
+utm300 MACH_UTM300 UTM300 3196
+tsunagi MACH_TSUNAGI TSUNAGI 3197
+ts75xx MACH_TS75XX TS75XX 3198
+msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199
+ts47xx MACH_TS47XX TS47XX 3200
+da850_k5 MACH_DA850_K5 DA850_K5 3201
+ax502 MACH_AX502 AX502 3202
+igep0032 MACH_IGEP0032 IGEP0032 3203
+antero MACH_ANTERO ANTERO 3204
+synergy MACH_SYNERGY SYNERGY 3205
+ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
+wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
+punica MACH_PUNICA PUNICA 3208
+sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209
+mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
+mackerel MACH_MACKEREL MACKEREL 3211
+fa9x27 MACH_FA9X27 FA9X27 3213
+ns2816tb MACH_NS2816TB NS2816TB 3214
+ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
+ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
+kaen MACH_KAEN KAEN 3217
+nv1000 MACH_NV1000 NV1000 3218
+nuc950ts MACH_NUC950TS NUC950TS 3219
+nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
+ast2200 MACH_AST2200 AST2200 3221
+lead MACH_LEAD LEAD 3222
+unino1 MACH_UNINO1 UNINO1 3223
+greeco MACH_GREECO GREECO 3224
+verdi MACH_VERDI VERDI 3225
+dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
+quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
+abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
+svcid MACH_SVCID SVCID 3229
+msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230
+msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231
+icon_g MACH_ICON_G ICON_G 3232
+mb3 MACH_MB3 MB3 3233
+gsia18s MACH_GSIA18S GSIA18S 3234
+pivicc MACH_PIVICC PIVICC 3235
+pcm048 MACH_PCM048 PCM048 3236
+dds MACH_DDS DDS 3237
+chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238
mov pc, lr
ENDPROC(vfp_save_state)
+ .align
last_VFP_context_address:
.word last_VFP_context
*/
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
}
static int
-simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
{
unsigned int target_id = sc->device->id;
char fname[MAX_ROOT_LEN+16];
return 0;
}
+static DEF_SCSI_QCMD(simscsi_queuecommand)
+
static int
simscsi_host_reset (struct scsi_cmnd *sc)
{
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
select GENERIC_ATOMIC64 if !64BIT
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_IRQ_PROBE
menu "Machine selection"
endchoice
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+ default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+ range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ range 11 64
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. Keep this in mind
+ when choosing a value for this option.
+
config BOARD_SCACHE
bool
config CPU_R4400_WORKAROUNDS
bool
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config IRQ_PER_CPU
- bool
-
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
unsigned int old_state)
{
+#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
serial8250_do_pm(port, state, old_state);
break;
}
+#endif
}
#define PORT(_base, _irq) \
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str)
+ if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
- else
- strict_strtoul(memsize_str, 0, &memsize);
+
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
calculate(base_clock, frequency, &prediv, &postdiv, &mul);
writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
- msleep(1);
+ mdelay(1);
writel(4, &clock->pll);
while (readl(&clock->pll) & PLL_STATUS)
;
writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
- msleep(75);
+ mdelay(75);
}
static void __init tnetd7300_init_clocks(void)
}
EXPORT_SYMBOL(clk_put);
-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
{
switch (ar7_chip_id()) {
case AR7_CHIP_7100:
}
/* adjust vbus clock rate */
vbus_clk.rate = bus_clk.rate / 2;
-
- return 0;
}
-arch_initcall(ar7_init_clocks);
{
struct clk *cpu_clk;
+ /* Initialize ar7 clocks so the CPU clock frequency is correct */
+ ar7_init_clocks();
+
cpu_clk = clk_get(NULL, "cpu");
if (IS_ERR(cpu_clk)) {
printk(KERN_ERR "unable to get cpu clock\n");
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
cpu_relax();
}
-static void str2eaddr(char *str, char *dest)
-{
- int i = 0;
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+ if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
- if (str == NULL) {
- memset(dest, 0, 6);
- return;
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+{
+ char buf[100];
+ u32 boardflags;
+
+ memset(sprom, 0, sizeof(struct ssb_sprom));
+
+ sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ READ_FROM_NVRAM(revision, "sromrev", buf);
+ if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->il0mac);
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et0mac);
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et1mac);
+ READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+ READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+ READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+ READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
+ READ_FROM_NVRAM(board_rev, "boardrev", buf);
+ READ_FROM_NVRAM(country_code, "ccode", buf);
+ READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
+ READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
+ READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
+ READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
+ READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
+ READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
+ READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
+ READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
+ READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
+ READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
+ READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
+ READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+ READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+ READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+ READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+ READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+ READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+ READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+ READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+ READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+ READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+ READ_FROM_NVRAM(tri2g, "tri2g", buf);
+ READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+ READ_FROM_NVRAM(tri5g, "tri5g", buf);
+ READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+ READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+ READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+ READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+ READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
+ READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
+ READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
+ READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
+ READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
+ READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+ READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+ READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+ READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+ READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+ READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+ READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
}
-
- for (;;) {
- dest[i++] = (char) simple_strtoul(str, NULL, 16);
- str += 2;
- if (!*str++ || i == 6)
- break;
+ if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
}
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
- char buf[100];
+ char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+ else
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- /* Fill sprom structure */
- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
- iv->sprom.revision = 3;
-
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et0mac);
+ bcm47xx_fill_sprom(&iv->sprom);
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et1mac);
-
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
void __init plat_mem_setup(void)
{
int err;
+ char buf[100];
+ struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
+ mcore = &ssb_bcm47xx.mipscore;
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+
+ printk(KERN_DEBUG "Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+ sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
+
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
*/
-#define PRID_IMP_BMIPS4KC 0x4000
-#define PRID_IMP_BMIPS32 0x8000
+#define PRID_IMP_BMIPS32_REV4 0x4000
+#define PRID_IMP_BMIPS32_REV8 0x8000
#define PRID_IMP_BMIPS3300 0x9000
#define PRID_IMP_BMIPS3300_ALT 0x9100
#define PRID_IMP_BMIPS3300_BUG 0x0000
#define SET_PERSONALITY(ex) \
do { \
- set_personality(PER_LINUX); \
+ if (personality(current->personality) != PER_LINUX) \
+ set_personality(PER_LINUX); \
\
current->thread.abi = &mips_abi; \
} while (0)
#define SET_PERSONALITY(ex) \
do { \
+ unsigned int p; \
+ \
clear_thread_flag(TIF_32BIT_REGS); \
clear_thread_flag(TIF_32BIT_ADDR); \
\
else \
current->thread.abi = &mips_abi; \
\
- if (current->personality != PER_LINUX32) \
+ p = personality(current->personality); \
+ if (p != PER_LINUX32 && p != PER_LINUX) \
set_personality(PER_LINUX); \
} while (0)
"dsrl32 %L0, %L0, 0" "\n\t" \
"dsll32 %M0, %M0, 0" "\n\t" \
"or %L0, %L0, %M0" "\n\t" \
+ ".set push" "\n\t" \
+ ".set noreorder" "\n\t" \
+ ".set nomacro" "\n\t" \
"sd %L0, %2" "\n\t" \
+ ".set pop" "\n\t" \
".set mips0" "\n" \
: "=r" (__tmp) \
- : "0" (__val), "m" (*__mem)); \
+ : "0" (__val), "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else \
local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
+ ".set push" "\n\t" \
+ ".set noreorder" "\n\t" \
+ ".set nomacro" "\n\t" \
"ld %L0, %1" "\n\t" \
+ ".set pop" "\n\t" \
"dsra32 %M0, %L0, 0" "\n\t" \
"sll %L0, %L0, 0" "\n\t" \
".set mips0" "\n" \
: "=r" (__val) \
- : "m" (*__mem)); \
+ : "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else { \
}
int __init ar7_gpio_init(void);
-
-int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);
#endif /* __AR7_H__ */
#define __NVRAM_H
#include <linux/types.h>
+#include <linux/kernel.h>
struct nvram_header {
u32 magic;
extern int nvram_getenv(char *name, char *val, size_t val_len);
+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+ &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
#endif
*
* Copyright (c) 2009 Qi Hardware inc.,
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or later
QI_LB60_GPIO_KEYIN(3),
QI_LB60_GPIO_KEYIN(4),
QI_LB60_GPIO_KEYIN(5),
- QI_LB60_GPIO_KEYIN(7),
+ QI_LB60_GPIO_KEYIN(6),
QI_LB60_GPIO_KEYIN8,
};
/* PCM */
struct platform_device jz4740_pcm_device = {
- .name = "jz4740-pcm",
+ .name = "jz4740-pcm-audio",
.id = -1,
};
#include <asm/bootinfo.h>
#include <asm/mach-jz4740/base.h>
-void jz4740_init_cmdline(int argc, char *argv[])
+static __init void jz4740_init_cmdline(int argc, char *argv[])
{
unsigned int count = COMMAND_LINE_SIZE - 1;
int i;
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
- case PRID_IMP_BMIPS32:
+ case PRID_IMP_BMIPS32_REV4:
+ case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
__cpu_name[cpu] = "Broadcom BMIPS32";
break;
__cpu_name[cpu] = "Broadcom BMIPS5000";
c->options |= MIPS_CPU_ULRI;
break;
- case PRID_IMP_BMIPS4KC:
- c->cputype = CPU_4KC;
- __cpu_name[cpu] = "MIPS 4Kc";
- break;
}
}
SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
+ unsigned int p = personality & 0xffffffff;
int ret;
- personality &= 0xffffffff;
+
if (personality(current->personality) == PER_LINUX32 &&
- personality == PER_LINUX)
- personality = PER_LINUX32;
- ret = sys_personality(personality);
- if (ret == PER_LINUX32)
- ret = PER_LINUX;
+ personality(p) == PER_LINUX)
+ p = (p & ~PER_MASK) | PER_LINUX32;
+ ret = sys_personality(p);
+ if (ret != -1 && personality(ret) == PER_LINUX32)
+ ret = (ret & ~PER_MASK) | PER_LINUX;
return ret;
}
childregs->regs[7] = 0; /* Clear error flag */
childregs->regs[2] = 0; /* Child gets zero as return value */
- regs->regs[2] = p->pid;
if (childregs->cp0_status & ST0_CU0) {
childregs->regs[28] = (unsigned long) ti;
return;
base = virt_to_phys((void *)initial_boot_params);
- size = initial_boot_params->totalsize;
+ size = be32_to_cpu(initial_boot_params->totalsize);
/* Before we do anything, lets reserve the dt blob */
reserve_mem_mach(base, size);
{
extern int gic_present;
- /* This is Malta specific: IPI,performance and timer inetrrupts */
+ /* This is Malta specific: IPI,performance and timer interrupts */
if (gic_present)
change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
STATUSF_IP6 | STATUSF_IP7);
extern asmlinkage void handle_reserved(void);
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- struct mips_fpu_struct *ctx, int has_fpu);
+ struct mips_fpu_struct *ctx, int has_fpu,
+ void *__user *fault_addr);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
force_sig_info(SIGFPE, &info, current);
}
+static int process_fpemu_return(int sig, void __user *fault_addr)
+{
+ if (sig == SIGSEGV || sig == SIGBUS) {
+ struct siginfo si = {0};
+ si.si_addr = fault_addr;
+ si.si_signo = sig;
+ if (sig == SIGSEGV) {
+ if (find_vma(current->mm, (unsigned long)fault_addr))
+ si.si_code = SEGV_ACCERR;
+ else
+ si.si_code = SEGV_MAPERR;
+ } else {
+ si.si_code = BUS_ADRERR;
+ }
+ force_sig_info(sig, &si, current);
+ return 1;
+ } else if (sig) {
+ force_sig(sig, current);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
/*
* XXX Delayed fp exceptions when doing a lazy ctx switch XXX
*/
asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
{
- siginfo_t info;
+ siginfo_t info = {0};
if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
== NOTIFY_STOP)
if (fcr31 & FPU_CSR_UNI_X) {
int sig;
+ void __user *fault_addr = NULL;
/*
* Unimplemented operation exception. If we've got the full
lose_fpu(1);
/* Run the emulator */
- sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1);
+ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
+ &fault_addr);
/*
* We can't allow the emulated instruction to leave any of
own_fpu(1); /* Using the FPU again. */
/* If something went wrong, signal */
- if (sig)
- force_sig(sig, current);
+ process_fpemu_return(sig, fault_addr);
return;
} else if (fcr31 & FPU_CSR_INV_X)
if (!raw_cpu_has_fpu) {
int sig;
+ void __user *fault_addr = NULL;
sig = fpu_emulator_cop1Handler(regs,
- ¤t->thread.fpu, 0);
- if (sig)
- force_sig(sig, current);
- else
+ ¤t->thread.fpu,
+ 0, &fault_addr);
+ if (!process_fpemu_return(sig, fault_addr))
mt_ase_fp_affinity();
}
/* this of-course trashes what was there before... */
v->pbuffer = vmalloc(P_SIZE);
+ if (!v->pbuffer) {
+ pr_warning("VPE loader: unable to allocate memory\n");
+ return -ENOMEM;
+ }
v->plen = P_SIZE;
v->load_addr = NULL;
v->len = 0;
if (ret < 0)
v->shared_ptr = NULL;
- // cleanup any temp buffers
- if (v->pbuffer)
- vfree(v->pbuffer);
+ vfree(v->pbuffer);
v->plen = 0;
+
return ret;
}
if (v == NULL)
return -ENODEV;
- if (v->pbuffer == NULL) {
- printk(KERN_ERR "VPE loader: no buffer for program\n");
- return -ENOMEM;
- }
-
if ((count + v->len) > v->plen) {
printk(KERN_WARNING
"VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
.Lfwd_fixup:
PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
andi a2, 0x3f
+ LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
.Lpartial_fixup:
PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
andi a2, LONGMASK
+ LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
#define parse_even_earlier(res, option, p) \
do { \
+ int ret; \
if (strncmp(option, (char *)p, strlen(option)) == 0) \
- strict_strtol((char *)p + strlen(option"="), \
- 10, &res); \
+ ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
} while (0)
void __init prom_init_env(void)
#if __mips >= 4 && __mips != 32
static int fpux_emu(struct pt_regs *,
- struct mips_fpu_struct *, mips_instruction);
+ struct mips_fpu_struct *, mips_instruction, void *__user *);
#endif
/* Further private data for which no space exists in mips_fpu_struct */
* Two instructions if the instruction is in a branch delay slot.
*/
-static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
+static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+ void *__user *fault_addr)
{
mips_instruction ir;
unsigned long emulpc, contpc;
unsigned int cond;
- if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
/* XXX NEC Vr54xx bug workaround */
if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
#endif
return SIGILL;
}
- if (get_user(ir, (mips_instruction __user *) emulpc)) {
+ if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)emulpc;
return SIGBUS;
}
+ if (__get_user(ir, (mips_instruction __user *) emulpc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)emulpc;
+ return SIGSEGV;
+ }
/* __compute_return_epc() will have updated cp0_epc */
contpc = xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
u64 val;
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+
+ if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
DITOREG(val, MIPSInst_RT(ir));
break;
}
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_RT(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
}
u32 val;
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
SITOREG(val, MIPSInst_RT(ir));
break;
}
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_RT(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
}
contpc = (xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
- if (get_user(ir,
- (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc,
+ sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(ir,
+ (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
switch (MIPSInst_OPCODE(ir)) {
case lwc1_op:
#if __mips >= 4 && __mips != 32
case cop1x_op:{
- int sig;
-
- if ((sig = fpux_emu(xcp, ctx, ir)))
+ int sig = fpux_emu(xcp, ctx, ir, fault_addr);
+ if (sig)
return sig;
break;
}
DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
- mips_instruction ir)
+ mips_instruction ir, void *__user *fault_addr)
{
unsigned rcsr = 0; /* resulting csr */
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
SITOREG(val, MIPSInst_FD(ir));
break;
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_FS(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
case madd_s_op:
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
DITOREG(val, MIPSInst_FD(ir));
break;
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_FS(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
case madd_d_op:
}
int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
- int has_fpu)
+ int has_fpu, void *__user *fault_addr)
{
unsigned long oldepc, prevepc;
mips_instruction insn;
do {
prevepc = xcp->cp0_epc;
- if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
if (insn == 0)
xcp->cp0_epc += 4; /* skip nops */
else {
*/
/* convert to ieee library modes */
ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
- sig = cop1Emulate(xcp, ctx);
+ sig = cop1Emulate(xcp, ctx, fault_addr);
/* revert to mips rounding mode */
ieee754_csr.rm = mips_rm[ieee754_csr.rm];
}
return plat_dma_supported(dev, mask);
}
-void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
__dma_sync((unsigned long)vaddr, size, direction);
}
+EXPORT_SYMBOL(dma_cache_sync);
+
static struct dma_map_ops mips_default_dma_map_ops = {
.alloc_coherent = mips_dma_alloc_coherent,
.free_coherent = mips_dma_free_coherent,
*/
static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
{
+ unsigned int config2 = read_c0_config2();
+ unsigned int tmp;
+
/* Check the bypass bit (L2B) */
switch (c->cputype) {
case CPU_34K:
c->scache.linesz = 2 << tmp;
else
return 0;
+ return 1;
}
static inline int __init mips_sc_probe(void)
__asm__ __volatile__ (
" .set mips3 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set nomacro \n"
" ld %0, %1 \n"
+ " .set pop \n"
" lbu %0, (%0) \n"
" .set mips0 \n"
: "=r" (res)
- : "m" (vaddr));
+ : "R" (vaddr));
write_c0_status(sr);
ssnop_4();
__asm__ __volatile__ (
" .set mips3 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set nomacro \n"
" ld %0, %1 \n"
+ " .set pop \n"
" sb %2, (%0) \n"
" .set mips0 \n"
: "=&r" (tmp)
- : "m" (vaddr), "r" (c));
+ : "R" (vaddr), "r" (c));
write_c0_status(sr);
ssnop_4();
enum swarm_rtc_type {
RTC_NONE,
RTC_XICOR,
- RTC_M4LT81
+ RTC_M41T81,
};
enum swarm_rtc_type swarm_rtc_type;
sec = xicor_get_time();
break;
- case RTC_M4LT81:
+ case RTC_M41T81:
sec = m41t81_get_time();
break;
case RTC_XICOR:
return xicor_set_time(sec);
- case RTC_M4LT81:
+ case RTC_M41T81:
return m41t81_set_time(sec);
case RTC_NONE:
if (xicor_probe())
swarm_rtc_type = RTC_XICOR;
if (m41t81_probe())
- swarm_rtc_type = RTC_M4LT81;
+ swarm_rtc_type = RTC_M41T81;
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
--- /dev/null
+/* Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for function descriptions.
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_d0;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->d0 = regs->orig_d0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ unsigned long error = regs->d0;
+ return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->d0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ regs->d0 = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ *args++ = regs->a0;
+ case 1:
+ if (!n--) break;
+ *args++ = regs->d1;
+ case 2:
+ if (!n--) break;
+ *args++ = regs->a3;
+ case 3:
+ if (!n--) break;
+ *args++ = regs->a2;
+ case 4:
+ if (!n--) break;
+ *args++ = regs->d3;
+ case 5:
+ if (!n--) break;
+ *args++ = regs->d2;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ regs->a0 = *args++;
+ case 1:
+ if (!n--) break;
+ regs->d1 = *args++;
+ case 2:
+ if (!n--) break;
+ regs->a3 = *args++;
+ case 3:
+ if (!n--) break;
+ regs->a2 = *args++;
+ case 4:
+ if (!n--) break;
+ regs->d3 = *args++;
+ case 5:
+ if (!n--) break;
+ regs->d2 = *args++;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+#endif /* _ASM_SYSCALL_H */
GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
/* permit level 0 IRQs to take place */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
tmp = *gdbstub_port->_control;
/* permit level 0 IRQs only */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
asm volatile("mov mdr,%0" : "=d"(mdr));
local_save_flags(epsw);
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
gdbstub_store_fpu();
tmp = CROSS_GxICR(irq, new);
x &= GxICR_LEVEL | GxICR_ENABLE;
- if (GxICR(irq) & GxICR_REQUEST) {
+ if (GxICR(irq) & GxICR_REQUEST)
x |= GxICR_REQUEST | GxICR_DETECT;
CROSS_GxICR(irq, new) = x;
tmp = CROSS_GxICR(irq, new);
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
unsigned long long ll;
unsigned l[2];
} tsc64, result;
- unsigned long tsc, tmp;
+ unsigned long tmp;
unsigned product[3]; /* 96-bit intermediate value */
/* cnt32_to_63() is not safe with preemption */
preempt_disable();
- /* read the TSC value
- */
- tsc = get_cycles();
-
- /* expand to 64-bits.
+ /* expand the tsc to 64-bits.
* - sched_clock() must be called once a minute or better or the
* following will go horribly wrong - see cnt32_to_63()
*/
- tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
+ tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;
preempt_enable();
#include <linux/namei.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/utsname.h>
#include <linux/vfs.h>
smp_send_all_nop();
}
-void no_ack_irq(unsigned int irq) { }
-void no_end_irq(unsigned int irq) { }
-
void cpu_ack_irq(unsigned int irq)
{
unsigned long mask = EIEM_MASK(irq);
/* for iosapic interrupts */
if (type) {
- set_irq_chip_and_handler(irq, type, handle_level_irq);
+ set_irq_chip_and_handler(irq, type, handle_percpu_irq);
set_irq_chip_data(irq, data);
cpu_unmask_irq(irq);
}
int i;
for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
set_irq_chip_and_handler(i, &cpu_interrupt_type,
- handle_level_irq);
+ handle_percpu_irq);
}
set_irq_handler(TIMER_IRQ, handle_percpu_irq);
sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
{
struct rt_sigframe __user *frame;
- struct siginfo si;
sigset_t set;
unsigned long usp = (regs->gr[30] & ~(0x01UL));
unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE;
give_sigsegv:
DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n");
- si.si_signo = SIGSEGV;
- si.si_errno = 0;
- si.si_code = SI_KERNEL;
- si.si_pid = task_pid_vnr(current);
- si.si_uid = current_uid();
- si.si_addr = &frame->uc;
- force_sig_info(SIGSEGV, &si, current);
+ force_sig(SIGSEGV, current);
return;
}
#include <linux/times.h>
#include <linux/time.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
bool
default y if !PPC64
+config 32BIT
+ bool
+ default y if PPC32
+
config 64BIT
bool
default y if PPC64
cntlzw r0,r5 # we are shifting the dividend right
li r10,-1 # to make it < 2^32, and shifting
srw r10,r10,r0 # the divisor right the same amount,
- add r9,r4,r10 # rounding up (so the estimate cannot
+ addc r9,r4,r10 # rounding up (so the estimate cannot
andc r11,r6,r10 # ever be too large, only too small)
andc r9,r9,r10
+ addze r9,r9
or r11,r5,r11
rotlw r9,r9,r0
rotlw r11,r11,r0
/* FP registers 32 -> 63 */
#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
if (current)
- memcpy(mem, current->thread.evr[regno-32],
+ memcpy(mem, ¤t->thread.evr[regno-32],
dbg_reg_def[regno].size);
#else
/* fp registers not used by kernel, leave zero */
if (regno >= 32 && regno < 64) {
/* FP registers 32 -> 63 */
#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
- memcpy(current->thread.evr[regno-32], mem,
+ memcpy(¤t->thread.evr[regno-32], mem,
dbg_reg_def[regno].size);
#else
/* fp registers not used by kernel, leave zero */
}
/*
- * Called into from start_kernel, after lock_kernel has been called.
- * Initializes bootmem, which is unsed to manage page allocation until
- * mem_init is called.
+ * Called into from start_kernel this initializes bootmem, which is used
+ * to manage page allocation until mem_init is called.
*/
void __init setup_arch(char **cmdline_p)
{
#include <linux/resource.h>
#include <linux/times.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
else
#endif /* CONFIG_PPC_HAS_HASH_64K */
rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
- subpage_protection(pgdir, ea));
+ subpage_protection(mm, ea));
/* Dump some info in case of hash insertion failure, they should
* never happen so it is really useful to know if/when they do
static void pte_free_submit(struct pte_freelist_batch *batch)
{
- call_rcu(&batch->rcu, pte_free_rcu_callback);
+ call_rcu_sched(&batch->rcu, pte_free_rcu_callback);
}
void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
cmpldi cr0,r15,0 /* Check for user region */
std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */
beq normal_tlb_miss
+
+ li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
/* XXX replace the RMW cycles with immediate loads + writes */
-1: mfspr r10,SPRN_MAS1
+ mfspr r10,SPRN_MAS1
cmpldi cr0,r15,8 /* Check for vmalloc region */
rlwinm r10,r10,0,16,1 /* Clear TID */
mtspr SPRN_MAS1,r10
ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
/* Finally limit subsequent allocations */
- memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size);
+ memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
}
#endif /* CONFIG_PPC64 */
#include <linux/of_gpio.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/fs.h>
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
#include <linux/uaccess.h>
config PPC_PSERIES_DEBUG
depends on PPC_PSERIES && PPC_EARLY_DEBUG
bool "Enable extra debug logging in platforms/pseries"
+ help
+ Say Y here if you want the pseries core to produce a bunch of
+ debug messages to the system log. Select this if you are having a
+ problem with the pseries core and want to see more of what is
+ going on. This does not enable debugging in lpar.c, which must
+ be manually done due to its verbosity.
default y
config PPC_SMLPAR
* Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
*/
-#undef DEBUG
-
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/list.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#undef DEBUG
-
#include <linux/pci.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
source "lib/Kconfig.debug"
+config STRICT_DEVMEM
+ def_bool y
+ prompt "Filter access to /dev/mem"
+ ---help---
+ This option restricts access to /dev/mem. If this option is
+ disabled, you allow userspace access to all memory, including
+ kernel and userspace memory. Accidental memory access is likely
+ to be disastrous.
+ Memory access is required for experts who want to debug the kernel.
+
+ If you are unsure, say Y.
+
config DEBUG_STRICT_USER_COPY_CHECKS
bool "Strict user copy size checks"
---help---
void arch_free_page(struct page *page, int order);
void arch_alloc_page(struct page *page, int order);
+static inline int devmem_is_allowed(unsigned long pfn)
+{
+ return 0;
+}
+
#define HAVE_ARCH_FREE_PAGE
#define HAVE_ARCH_ALLOC_PAGE
#include <linux/resource.h>
#include <linux/times.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
#include <asm/sections.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/hardirq.h>
DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
/* Set the PER control regs, turns on single step for this address */
__ctl_load(kprobe_per_regs, 9, 11);
regs->psw.mask |= PSW_MASK_PER;
- regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+ regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
}
static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
__get_cpu_var(current_kprobe) = p;
/* Save the interrupt and per flags */
kcb->kprobe_saved_imask = regs->psw.mask &
- (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+ (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT);
/* Save the control regs that govern PER */
__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
}
return 1;
ss_probe:
- if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
- local_irq_disable();
prepare_singlestep(p, regs);
kcb->kprobe_status = KPROBE_HIT_SS;
return 1;
struct hlist_node *node, *tmp;
unsigned long flags, orig_ret_address = 0;
unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+ kprobe_opcode_t *correct_ret_addr = NULL;
INIT_HLIST_HEAD(&empty_rp);
kretprobe_hash_lock(current, &head, &flags);
/* another task is sharing our hash bucket */
continue;
- if (ri->rp && ri->rp->handler)
- ri->rp->handler(ri, regs);
+ orig_ret_address = (unsigned long)ri->ret_addr;
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+ correct_ret_addr = ri->ret_addr;
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
orig_ret_address = (unsigned long)ri->ret_addr;
+
+ if (ri->rp && ri->rp->handler) {
+ ri->ret_addr = correct_ret_addr;
+ ri->rp->handler(ri, regs);
+ }
+
recycle_rp_inst(ri, &empty_rp);
if (orig_ret_address != trampoline_address) {
break;
}
}
- kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
reset_current_kprobe();
goto out;
}
reset_current_kprobe();
- if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
- local_irq_enable();
out:
preempt_enable_no_resched();
return 1;
}
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
restore_previous_kprobe(kcb);
else {
reset_current_kprobe();
- if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
- local_irq_enable();
}
preempt_enable_no_resched();
break;
return 0;
}
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ int ret;
+
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_disable();
+ ret = kprobe_trap_handler(regs, trapnr);
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+ return ret;
+}
+
/*
* Wrapper routine to for handling exceptions.
*/
unsigned long val, void *data)
{
struct die_args *args = (struct die_args *)data;
+ struct pt_regs *regs = args->regs;
int ret = NOTIFY_DONE;
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_disable();
+
switch (val) {
case DIE_BPT:
if (kprobe_handler(args->regs))
ret = NOTIFY_STOP;
break;
case DIE_TRAP:
- /* kprobe_running() needs smp_processor_id() */
- preempt_disable();
- if (kprobe_running() &&
- kprobe_fault_handler(args->regs, args->trapnr))
+ if (!preemptible() && kprobe_running() &&
+ kprobe_trap_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
- preempt_enable();
break;
default:
break;
}
+
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+
return ret;
}
/* setup return addr to the jprobe handler routine */
regs->psw.addr = (unsigned long)(jp->entry) | PSW_ADDR_AMODE;
+ regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
/* r14 is the function return address */
kcb->jprobe_saved_r14 = (unsigned long)regs->gprs[14];
static int notrace s390_revalidate_registers(struct mci *mci)
{
int kill_task;
- u64 tmpclock;
u64 zero;
void *fpt_save_area, *fpt_creg_save_area;
: "0", "cc");
#endif
/* Revalidate clock comparator register */
- asm volatile(
- " stck 0(%1)\n"
- " sckc 0(%1)"
- : "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+ if (S390_lowcore.clock_comparator == -1)
+ set_clock_comparator(S390_lowcore.mcck_clock);
+ else
+ set_clock_comparator(S390_lowcore.clock_comparator);
/* Check if old PSW is valid */
if (!mci->wp)
/*
#include <linux/kernel_stat.h>
#include <linux/rcupdate.h>
#include <linux/posix-timers.h>
+#include <linux/cpu.h>
#include <asm/s390_ext.h>
#include <asm/timer.h>
__ctl_set_bit(0,10);
}
+static int __cpuinit s390_nohz_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct s390_idle_data *idle;
+ long cpu = (long) hcpu;
+
+ idle = &per_cpu(s390_idle, cpu);
+ switch (action) {
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ idle->nohz_delay = 0;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
void __init vtime_init(void)
{
/* request the cpu timer external interrupt */
/* Enable cpu timer interrupts on the boot cpu. */
init_cpu_vtimer();
+ cpu_notifier(s390_nohz_notify, 0);
}
{
unsigned long mask, cr0, cr0_saved;
u64 clock_saved;
+ u64 end;
+ mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ end = get_clock() + (usecs << 12);
clock_saved = local_tick_disable();
- set_clock_comparator(get_clock() + (usecs << 12));
__ctl_store(cr0_saved, 0, 0);
cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
__ctl_load(cr0 , 0, 0);
- mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
lockdep_off();
- trace_hardirqs_on();
- __load_psw_mask(mask);
- local_irq_disable();
+ do {
+ set_clock_comparator(end);
+ trace_hardirqs_on();
+ __load_psw_mask(mask);
+ local_irq_disable();
+ } while (get_clock() < end);
lockdep_on();
__ctl_load(cr0_saved, 0, 0);
local_tick_enable(clock_saved);
static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr)
{
- unsigned long mask, result;
+ unsigned long mask;
pte_t *ptep, pte;
struct page *page;
- result = write ? 0 : _PAGE_RO;
- mask = result | _PAGE_INVALID | _PAGE_SPECIAL;
+ mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr);
do {
pte = *ptep;
barrier();
- if ((pte_val(pte) & mask) != result)
+ if ((pte_val(pte) & mask) != 0)
return 0;
VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
page = pte_page(pte);
select HAVE_SPARSE_IRQ
select RTC_LIB
select GENERIC_ATOMIC64
- select GENERIC_HARDIRQS_NO_DEPRECATED
+ # Support the deprecated APIs until MFD and GPIOLIB catch up.
+ select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
};
/* FSI */
-/*
- * FSI-B use external clock which came from da7210.
- * So, we should change parent of fsi
- */
-#define FCLKBCR 0xa415000c
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
-
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimckb_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKBCR,
- .rate = 0, /* unknown */
-};
-
static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
if (!IS_ERR(clk)) {
- clk_register(&fsimckb_clk);
- clk_set_parent(clk, &fsimckb_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimckb_clk, 11000);
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimckb_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimckb_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
+ __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
/* FPGA System register setup*/
__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
};
/* FSI */
-/*
- * FSI-A use external clock which came from ak464x.
- * So, we should change parent of fsi
- */
-#define FCLKACR 0xa4150008
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimcka_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKACR,
- .rate = 0, /* unknown */
-};
-
/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
gpio_request(GPIO_FN_KEYOUT0, NULL);
/* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
gpio_request(GPIO_FN_FSIMCKA, NULL);
+ gpio_request(GPIO_FN_FSIIASD, NULL);
gpio_request(GPIO_FN_FSIOASD, NULL);
gpio_request(GPIO_FN_FSIIABCK, NULL);
gpio_request(GPIO_FN_FSIIALRCK, NULL);
gpio_request(GPIO_FN_FSIOABCK, NULL);
gpio_request(GPIO_FN_FSIOALRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
/* set SPU2 clock to 83.4 MHz */
clk = clk_get(NULL, "spu_clk");
- if (clk) {
+ if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 83333333));
clk_put(clk);
}
/* change parent of FSI A */
clk = clk_get(NULL, "fsia_clk");
- if (clk) {
- clk_register(&fsimcka_clk);
- clk_set_parent(clk, &fsimcka_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimcka_clk, 11000);
+ if (!IS_ERR(clk)) {
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimcka_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimcka_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
void *kmap_coherent(struct page *page, unsigned long addr);
void kunmap_coherent(void *kvaddr);
-#define PG_dcache_dirty PG_arch_1
+#define PG_dcache_clean PG_arch_1
void cpu_cache_init(void);
#define ARCH_HAS_PREFETCHW
static inline void prefetch(void *x)
{
- __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+ __builtin_prefetch(x, 0, 3);
}
-#define prefetchw(x) prefetch(x)
+static inline void prefetchw(void *x)
+{
+ __builtin_prefetch(x, 1, 3);
+}
#endif
#endif /* __KERNEL__ */
#define __NR_sendmsg 355
#define __NR_recvmsg 356
#define __NR_recvmmsg 357
+#define __NR_accept4 358
-#define NR_syscalls 358
+#define NR_syscalls 359
#ifdef __KERNEL__
SHDMA_SLAVE_SDHI1_RX,
};
+extern struct clk sh7724_fsimcka_clk;
+extern struct clk sh7724_fsimckb_clk;
+
#endif /* __ASM_SH7724_H__ */
static void master_clk_init(struct clk *clk)
{
- return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+ clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7201_master_clk_ops = {
for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
int divisor = frqcr3_divisors[i];
- if (clk->ops->set_rate(clk, clk->parent->rate /
- divisor, 0) == 0)
+ if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
break;
}
return 0;
}
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long frqcr3;
unsigned int tmp;
.parent = &pll_clk,
};
+/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
+struct clk sh7724_fsimcka_clk = {
+};
+
+struct clk sh7724_fsimckb_clk = {
+};
+
static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
&pll_clk,
&div3_clk,
+ &sh7724_fsimcka_clk,
+ &sh7724_fsimckb_clk,
};
static void div4_kick(struct clk *clk)
[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
};
-enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
- [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
- [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
};
+enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *fclkacr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimcka_clk,
+ [3] = NULL,
+};
+
+static struct clk *fclkbcr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimckb_clk,
+ [3] = NULL,
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+ [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
+ fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
+ [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
+ fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
+};
+
static struct clk mstp_clks[HWBLK_NR] = {
SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
/* DIV6 clocks */
CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+ CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
if (!ret)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+ if (!ret)
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
+
if (!ret)
ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
}
if (op & CACHEFLUSH_I)
- flush_cache_all();
+ flush_icache_range(addr, addr+len);
up_read(¤t->mm->mmap_sem);
return 0;
.long sys_sendmsg /* 355 */
.long sys_recvmsg
.long sys_recvmmsg
+ .long sys_accept4
* fill out .eh_frame -- PFM. */
.LEND_vsyscall:
.size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
.section .eh_frame,"a",@progbits
+ .previous
.LCIE:
.ualong .LCIE_end - .LCIE_start
.LCIE_start:
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
#endif
flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
* another ASID than the current one.
*/
map_coherent = (current_cpu_data.dcache.n_aliases &&
- !test_bit(PG_dcache_dirty, &page->flags) &&
+ test_bit(PG_dcache_clean, &page->flags) &&
page_mapped(page));
if (map_coherent)
vaddr = kmap_coherent(page, address);
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
__flush_dcache_page(__pa(page_address(page)));
}
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
kunmap_coherent(vto);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
if (vma->vm_flags & VM_EXEC)
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
kunmap_coherent(vfrom);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
}
vto = kmap_atomic(to, KM_USER1);
if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
- !test_bit(PG_dcache_dirty, &from->flags)) {
+ test_bit(PG_dcache_clean, &from->flags)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
kunmap_coherent(vfrom);
page = pfn_to_page(pfn);
if (pfn_valid(pfn)) {
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+ int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
if (dirty)
__flush_purge_region(page_address(page), PAGE_SIZE);
}
if (pages_do_alias(addr, vmaddr)) {
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *kaddr;
kaddr = kmap_coherent(page, vmaddr);
enum fixed_addresses idx;
unsigned long vaddr;
- BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+ BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
pagefault_disable();
int (*v2_dev_open)(char *devpath);
void (*v2_dev_close)(int d);
int (*v2_dev_read)(int d, char *buf, int nbytes);
- int (*v2_dev_write)(int d, char *buf, int nbytes);
+ int (*v2_dev_write)(int d, const char *buf, int nbytes);
int (*v2_dev_seek)(int d, int hi, int lo);
/* Never issued (multistage load support) */
extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
/* Get the prom firmware revision. */
extern int prom_getprev(void);
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
int value_size);
-extern phandle prom_pathtoinode(char *path);
extern phandle prom_inst2pkg(int);
/* Dorking with Bus ranges... */
/* Boot argument acquisition, returns the boot command line string. */
extern char *prom_getbootargs(void);
-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
/* Halt and power-off the machine. */
extern void prom_halt_power_off(void) __attribute__ ((noreturn));
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
/* Acquire the IDPROM of the root node in the prom device tree. This
* gets passed a buffer where you would like it stuffed. The return value
* is the format type of this idprom or 0xff on error.
*/
extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
int value_size);
-extern phandle prom_pathtoinode(const char *path);
extern phandle prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
extern void prom_sun4v_guest_soft_state(void);
extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
if (leon3_gptimer_regs && leon3_irqctrl_regs) {
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
- (((1000000 / 100) - 1)));
+ (((1000000 / HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
#ifdef CONFIG_SMP
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
- LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
# endif
#include <linux/sched.h>
#include <linux/threads.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/init.h>
#include <linux/resource.h>
#include <linux/times.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
#include <linux/mman.h>
#include <linux/utsname.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/perf_event.h>
enum direction {
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
lib-y := bootstr_$(BITS).o
lib-$(CONFIG_SPARC32) += devmap.o
-lib-y += devops_$(BITS).o
lib-y += init_$(BITS).o
lib-$(CONFIG_SPARC32) += memory.o
lib-y += misc_$(BITS).o
extern void restore_current(void);
-/* Non blocking get character from console input device, returns -1
- * if no input was taken. This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
- static char inc;
- int i = -1;
- unsigned long flags;
-
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- i = (*(romvec->pv_nbgetchar))();
- break;
- case PROM_V2:
- case PROM_V3:
- if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) {
- i = inc;
- } else {
- i = -1;
- }
- break;
- default:
- i = -1;
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
- return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
/* Non blocking put character to console device, returns -1 if
* unsuccessful.
*/
-int
-prom_nbputchar(char c)
+static int prom_nbputchar(const char *buf)
{
- static char outc;
unsigned long flags;
int i = -1;
spin_lock_irqsave(&prom_lock, flags);
switch(prom_vers) {
case PROM_V0:
- i = (*(romvec->pv_nbputchar))(c);
+ i = (*(romvec->pv_nbputchar))(*buf);
break;
case PROM_V2:
case PROM_V3:
- outc = c;
- if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1)
+ if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout,
+ buf, 0x1) == 1)
i = 0;
- else
- i = -1;
break;
default:
- i = -1;
break;
};
restore_current();
return i; /* Ugh, we could spin forever on unsupported proms ;( */
}
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
{
- int character;
- while((character = prom_nbgetchar()) == -1) ;
- return (char) character;
+ while (len) {
+ int n = prom_nbputchar(buf);
+ if (n)
+ continue;
+ len--;
+ buf++;
+ }
}
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
- while(prom_nbputchar(c) == -1) ;
-}
extern int prom_stdin, prom_stdout;
-/* Non blocking get character from console input device, returns -1
- * if no input was taken. This can be used for polling.
- */
-inline int
-prom_nbgetchar(void)
-{
- unsigned long args[7];
- char inc;
-
- args[0] = (unsigned long) "read";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) prom_stdin;
- args[4] = (unsigned long) &inc;
- args[5] = 1;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-
- if (args[6] == 1)
- return inc;
- return -1;
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-inline int
-prom_nbputchar(char c)
+static int __prom_console_write_buf(const char *buf, int len)
{
unsigned long args[7];
- char outc;
-
- outc = c;
+ int ret;
args[0] = (unsigned long) "write";
args[1] = 3;
args[2] = 1;
args[3] = (unsigned int) prom_stdout;
- args[4] = (unsigned long) &outc;
- args[5] = 1;
+ args[4] = (unsigned long) buf;
+ args[5] = (unsigned int) len;
args[6] = (unsigned long) -1;
p1275_cmd_direct(args);
- if (args[6] == 1)
- return 0;
- else
+ ret = (int) args[6];
+ if (ret < 0)
return -1;
+ return ret;
}
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
-{
- int character;
- while((character = prom_nbgetchar()) == -1) ;
- return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
+void prom_console_write_buf(const char *buf, int len)
{
- prom_nbputchar(c);
-}
-
-void
-prom_puts(const char *s, int len)
-{
- unsigned long args[7];
-
- args[0] = (unsigned long) "write";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) prom_stdout;
- args[4] = (unsigned long) s;
- args[5] = len;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
+ while (len) {
+ int n = __prom_console_write_buf(buf, len);
+ if (n < 0)
+ continue;
+ len -= n;
+ buf += len;
+ }
}
+++ /dev/null
-/*
- * devops.c: Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Open the device described by the string 'dstr'. Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns -1 on failure.
- */
-int
-prom_devopen(char *dstr)
-{
- int handle;
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- handle = (*(romvec->pv_v0devops.v0_devopen))(dstr);
- if(handle == 0) handle = -1;
- break;
- case PROM_V2:
- case PROM_V3:
- handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr);
- break;
- default:
- handle = -1;
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
-
- return handle;
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- (*(romvec->pv_v0devops.v0_devclose))(dhandle);
- break;
- case PROM_V2:
- case PROM_V3:
- (*(romvec->pv_v2devops.v2_dev_close))(dhandle);
- break;
- default:
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
- return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- (*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo);
- break;
- case PROM_V2:
- case PROM_V3:
- (*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo);
- break;
- default:
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
-}
+++ /dev/null
-/*
- * devops.c: Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* Open the device described by the string 'dstr'. Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns 0 on failure.
- */
-int
-prom_devopen(const char *dstr)
-{
- unsigned long args[5];
-
- args[0] = (unsigned long) "open";
- args[1] = 1;
- args[2] = 1;
- args[3] = (unsigned long) dstr;
- args[4] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-
- return (int) args[4];
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
- unsigned long args[4];
-
- args[0] = (unsigned long) "close";
- args[1] = 1;
- args[2] = 0;
- args[3] = (unsigned int) dhandle;
-
- p1275_cmd_direct(args);
-
- return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
- unsigned long args[7];
-
- args[0] = (unsigned long) "seek";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) dhandle;
- args[4] = seekhi;
- args[5] = seeklo;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-}
#include <asm/system.h>
#include <asm/ldc.h>
-int prom_service_exists(const char *service_name)
+static int prom_service_exists(const char *service_name)
{
unsigned long args[5];
prom_halt();
}
-/* Set prom sync handler to call function 'funcp'. */
-void prom_setcallback(callback_func_t funcp)
-{
- unsigned long args[5];
- if (!funcp)
- return;
- args[0] = (unsigned long) "set-callback";
- args[1] = 1;
- args[2] = 1;
- args[3] = (unsigned long) funcp;
- args[4] = (unsigned long) -1;
- p1275_cmd_direct(args);
-}
-
/* Get the idprom and stuff it into buffer 'idbuf'. Returns the
* format type. 'num_bytes' is the number of bytes that your idbuf
* has space for. Returns 0xff on error.
#include <linux/kernel.h>
#include <linux/compiler.h>
+#include <linux/spinlock.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
+#define CONSOLE_WRITE_BUF_SIZE 1024
+
static char ppbuf[1024];
+static char console_write_buf[CONSOLE_WRITE_BUF_SIZE];
+static DEFINE_RAW_SPINLOCK(console_write_lock);
void notrace prom_write(const char *buf, unsigned int n)
{
- char ch;
+ unsigned int dest_len;
+ unsigned long flags;
+ char *dest;
+
+ dest = console_write_buf;
+ raw_spin_lock_irqsave(&console_write_lock, flags);
- while (n != 0) {
- --n;
- if ((ch = *buf++) == '\n')
- prom_putchar('\r');
- prom_putchar(ch);
+ dest_len = 0;
+ while (n-- != 0) {
+ char ch = *buf++;
+ if (ch == '\n') {
+ *dest++ = '\r';
+ dest_len++;
+ }
+ *dest++ = ch;
+ dest_len++;
+ if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) {
+ prom_console_write_buf(console_write_buf, dest_len);
+ dest = console_write_buf;
+ dest_len = 0;
+ }
}
+ if (dest_len)
+ prom_console_write_buf(console_write_buf, dest_len);
+
+ raw_spin_unlock_irqrestore(&console_write_lock, flags);
}
void notrace prom_printf(const char *fmt, ...)
if (node == -1) return 0;
return node;
}
-
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(char *path)
-{
- phandle node;
- int inst;
-
- inst = prom_devopen (path);
- if (inst == -1) return 0;
- node = prom_inst2pkg (inst);
- prom_devclose (inst);
- if (node == -1) return 0;
- return node;
-}
return node;
}
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(const char *path)
-{
- phandle node;
- int inst;
-
- inst = prom_devopen (path);
- if (inst == 0)
- return 0;
- node = prom_inst2pkg(inst);
- prom_devclose(inst);
- if (node == -1)
- return 0;
- return node;
-}
-
int prom_ihandle2path(int handle, char *buffer, int bufsize)
{
unsigned long args[7];
menu "Bus options"
+config PCI
+ bool "PCI support"
+ default y
+ select PCI_DOMAINS
+ ---help---
+ Enable PCI root complex support, so PCIe endpoint devices can
+ be attached to the Tile chip. Many, but not all, PCI devices
+ are supported under Tilera's root complex driver.
+
+config PCI_DOMAINS
+ bool
+
config NO_IOMEM
def_bool !PCI
mb_incoherent();
}
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+ char *p;
+ int i;
+
+ /*
+ * Flush and invalidate the buffer out of the local L1/L2
+ * and request the home cache to flush and invalidate as well.
+ */
+ __finv_buffer(buffer, size);
+
+ /*
+ * Wait for the home cache to acknowledge that it has processed
+ * all the flush-and-invalidate requests. This does not mean
+ * that the flushed data has reached the memory controller yet,
+ * but it does mean the home cache is processing the flushes.
+ */
+ __insn_mf();
+
+ /*
+ * Issue a load to the last cache line, which can't complete
+ * until all the previously-issued flushes to the same memory
+ * controller have also completed. If we weren't striping
+ * memory, that one load would be sufficient, but since we may
+ * be, we also need to back up to the last load issued to
+ * another memory controller, which would be the point where
+ * we crossed an 8KB boundary (the granularity of striping
+ * across memory controllers). Keep backing up and doing this
+ * until we are before the beginning of the buffer, or have
+ * hit all the controllers.
+ */
+ for (i = 0, p = (char *)buffer + size - 1;
+ i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+ ++i) {
+ const unsigned long STRIPE_WIDTH = 8192;
+
+ /* Force a load instruction to issue. */
+ *(volatile char *)p;
+
+ /* Jump to end of previous stripe. */
+ p -= STRIPE_WIDTH;
+ p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+ }
+
+ /* Wait for the loads (and thus flushes) to have completed. */
+ __insn_mf();
+}
+
#endif /* _ASM_TILE_CACHEFLUSH_H */
#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
#define mmiowb()
/* Conversion between virtual and physical mappings. */
* we never run, uses them unconditionally.
*/
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
{
panic("inb/outb and friends do not exist on tile");
return 0;
}
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+ return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+ ioport_panic();
+}
+
static inline u8 inb(unsigned long addr)
{
return ioport_panic();
+++ /dev/null
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
- unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
- int index; /* PCI domain number */
- struct pci_bus *root_bus;
-
- int first_busno;
- int last_busno;
-
- int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
- int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
-
- struct pci_ops *ops;
-
- int irq_base; /* Base IRQ from the Hypervisor */
- int plx_gen1; /* flag for PLX Gen 1 configuration */
-
- /* Address ranges that are routed to this controller/bridge. */
- struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
- return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
- void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
- u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- * The following code swizzles for exactly one bridge. The routine
- * common_swizzle below handles multiple bridges. But there are a
- * some boards that don't follow the PCI spec's suggestion so we
- * break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
- unsigned char idsel)
-{
- return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
- long _ctl_ = -1; \
- if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
- _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
- _ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
- return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
#ifndef _ASM_TILE_PCI_H
#define _ASM_TILE_PCI_H
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ int index; /* PCI domain number */
+ struct pci_bus *root_bus;
+
+ int first_busno;
+ int last_busno;
+
+ int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
+ int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
+
+ struct pci_ops *ops;
+
+ int irq_base; /* Base IRQ from the Hypervisor */
+ int plx_gen1; /* flag for PLX Gen 1 configuration */
+
+ /* Address ranges that are routed to this controller/bridge. */
+ struct resource mem_resources[3];
+};
/*
* The hypervisor maps the entirety of CPA-space as bus addresses, so
*/
#define PCI_DMA_BUS_IS_PHYS 1
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-void __devinit pcibios_fixup_bus(struct pci_bus *bus);
-int __devinit _tile_cfg_read(struct pci_controller *hose,
- int bus,
- int slot,
- int function,
- int offset,
- int size,
- u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
- int bus,
- int slot,
- int function,
- int offset,
- int size,
- u32 val);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
- _tile_cfg_read(controller, \
- current_bus, \
- pci_slot, \
- pci_fn, \
- where, \
- size, \
- value)
-
-#define early_cfg_write(where, size, value) \
- _tile_cfg_write(controller, \
- current_bus, \
- pci_slot, \
- pci_fn, \
- where, \
- size, \
- value)
-
-
-
-#define PCICFG_BYTE 1
-#define PCICFG_WORD 2
-#define PCICFG_DWORD 4
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
#define TILE_NUM_PCIE 2
}
/*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
*/
+static inline int pcibios_assign_all_busses(void)
+{
+ return 1;
+}
-#define TILE_PCIE_LOWER_IO 0x0
-#define TILE_PCIE_UPPER_IO 0x10000
-#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
-
-#define _PAGE_NO_CACHE 0
-#define _PAGE_GUARDED 0
-
-
-#define pcibios_assign_all_busses() pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
static inline void pcibios_set_master(struct pci_dev *dev)
{
- /* No special bus mastering setup handling */
}
#define PCIBIOS_MIN_MEM 0
-#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO 0
/*
* This flag tells if the platform is TILEmpower that needs
* special configuration for the PLX switch chip.
*/
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
/* generic pci stuff */
#include <asm-generic/pci.h>
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
#endif /* _ASM_TILE_PCI_H */
/* Are we using huge pages in the TLB for kernel data? */
extern int kdata_huge;
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
#else /* __ASSEMBLY__ */
/* Do some slow action (e.g. read a slow SPR). */
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
struct pt_regs;
-int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
void do_signal(struct pt_regs *regs);
#endif
--- /dev/null
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM 8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM 10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL 128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1) /**< Small packet queue. */
+#define SIZE_LARGE (2) /**< Large packet queue. */
+#define SIZE_JUMBO (0) /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers. These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT 24 /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed. The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler. The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean. All
+ * pointers move left to right.
+ *
+ * @code
+ * I I V V V V I I I I
+ * 0 1 2 3 4 5 6 7 8 9 10
+ * ^ ^ ^ ^
+ * | | |
+ * | | __last_packet_plus_one
+ * | __buffer_write
+ * __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10). The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5. The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+ /** Byte offset of the next notify packet to be written: zero for the first
+ * packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+ * queue, etc. */
+ volatile uint32_t __packet_write;
+
+ /** Offset of the packet after the last valid packet (i.e., when any
+ * pointer is incremented to this value, it wraps back to zero). */
+ uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP. (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.) The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler. The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request. When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses. This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue. Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets. (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean. Remember:
+ * all pointers move right to left.
+ *
+ * V V V I I R R V V V
+ * 0 1 2 3 4 5 6 7 8 9
+ * ^ ^ ^ ^
+ * | | | |
+ * | | | __last_buffer
+ * | | __buffer_write
+ * | __buffer_requested_write
+ * __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7. The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive. Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+ /** Ordinal number of the next buffer to be written: 0 for the first slot in
+ * the queue, 1 for the second slot in the queue, etc. */
+ volatile uint32_t __buffer_write;
+
+ /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+ * below zero, it is reloaded with this value). */
+ uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+ /** The queue of packets waiting to be received. */
+ __netio_packet_queue_t __packet_receive_queue;
+ /** The intr bit mask that IDs this device. */
+ unsigned int __intr_id;
+ /** Offset to queues of empty buffers, one per size. */
+ uint32_t __buffer_queue[NETIO_NUM_SIZES];
+ /** The address of the first EPP tile, or -1 if no EPP. */
+ /* ISSUE: Actually this is always "0" or "~0". */
+ uint32_t __epp_location;
+ /** The queue ID that this queue represents. */
+ unsigned int __queue_id;
+ /** Number of acknowledgements received. */
+ volatile uint32_t __acks_received;
+ /** Last completion number received for packet_sendv. */
+ volatile uint32_t __last_completion_rcv;
+ /** Number of packets allowed to be outstanding. */
+ uint32_t __max_outstanding;
+ /** First VA available for packets. */
+ void* __va_0;
+ /** First VA in second range available for packets. */
+ void* __va_1;
+ /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+ uint32_t __padding[3];
+ /** The packets themselves. */
+ netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+ /** The next incoming packet to be read. */
+ uint32_t __packet_receive_read;
+ /** The next empty buffers to be read, one index per size. */
+ uint8_t __buffer_read[NETIO_NUM_SIZES];
+ /** Where the empty buffer we next request from the IPP will go, one index
+ * per size. */
+ uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+ /** PCIe interface flag. */
+ uint8_t __pcie;
+ /** Number of packets left to be received before we send a credit update. */
+ uint32_t __receive_credit_remaining;
+ /** Value placed in __receive_credit_remaining when it reaches zero. */
+ uint32_t __receive_credit_interval;
+ /** First fast I/O routine index. */
+ uint32_t __fastio_index;
+ /** Number of acknowledgements expected. */
+ uint32_t __acks_outstanding;
+ /** Last completion number requested. */
+ uint32_t __last_completion_req;
+ /** File descriptor for driver. */
+ int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE 64 /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE 64 /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor. FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+ uint16_t flags; /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+ uint16_t transfer_size; /**< Size of packet */
+ uint32_t va; /**< VA of start of packet */
+ __netio_pkt_handle_t handle; /**< Packet handle */
+ uint32_t csum0; /**< First checksum word */
+ uint32_t csum1; /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ * - As the "flags" member in the __netio_send_cmd_t, above; used only
+ * for netio_pkt_send_{prepare,commit}.
+ * - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet. Note that some code in the
+ * normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK 0x1
+
+/** Do checksum on this packet. (Only used with the __netio_send_cmd_t;
+ * normal packet sends use a special fast I/O index to denote checksumming,
+ * and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM 0x2
+
+/** Get a completion on this packet. Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+ Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
--- /dev/null
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+ /** The physical address of the memory. */
+ HV_PhysAddr pa;
+ /** Page table entry for the memory. This is only used to derive the
+ * memory's caching mode; the PA bits are ignored. */
+ HV_PTE pte;
+ /** The virtual address of the memory. */
+ HV_VirtAddr va;
+ /** Size (in bytes) of the memory area. */
+ int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+ /** Inform the Linux driver of the address of the NetIO arena memory.
+ * This offset is actually only used to convey information from netio
+ * to the Linux driver; it never makes it from there to the hypervisor.
+ * Write-only; takes a uint32_t specifying the VA address. */
+ NETIO_FIXED_ADDR = 0x5000000000000000ULL,
+
+ /** Inform the Linux driver of the size of the NetIO arena memory.
+ * This offset is actually only used to convey information from netio
+ * to the Linux driver; it never makes it from there to the hypervisor.
+ * Write-only; takes a uint32_t specifying the VA size. */
+ NETIO_FIXED_SIZE = 0x5100000000000000ULL,
+
+ /** Register current tile with IPP. Write then read: write, takes a
+ * netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+ NETIO_IPP_INPUT_REGISTER_OFF = 0x6000000000000000ULL,
+
+ /** Unregister current tile from IPP. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+ /** Start packets flowing. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_INIT_OFF = 0x6200000000000000ULL,
+
+ /** Stop packets flowing. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_UNINIT_OFF = 0x6300000000000000ULL,
+
+ /** Configure group (typically we group on VLAN). Write-only: takes an
+ * array of netio_group_t's, low 24 bits of the offset is the base group
+ * number times the size of a netio_group_t. */
+ NETIO_IPP_INPUT_GROUP_CFG_OFF = 0x6400000000000000ULL,
+
+ /** Configure bucket. Write-only: takes an array of netio_bucket_t's, low
+ * 24 bits of the offset is the base bucket number times the size of a
+ * netio_bucket_t. */
+ NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+ /** Get/set a parameter. Read or write: read or write data is the parameter
+ * value, low 32 bits of the offset is a __netio_getset_offset_t. */
+ NETIO_IPP_PARAM_OFF = 0x6600000000000000ULL,
+
+ /** Get fast I/O index. Read-only; returns a 4-byte base index value. */
+ NETIO_IPP_GET_FASTIO_OFF = 0x6700000000000000ULL,
+
+ /** Configure hijack IP address. Packets with this IPv4 dest address
+ * go to bucket NETIO_NUM_BUCKETS - 1. Write-only: takes an IP address
+ * in some standard form. FIXME: Define the form! */
+ NETIO_IPP_INPUT_HIJACK_CFG_OFF = 0x6800000000000000ULL,
+
+ /**
+ * Offsets beyond this point are reserved for the supervisor (although that
+ * enforcement must be done by the supervisor driver itself).
+ */
+ NETIO_IPP_USER_MAX_OFF = 0x6FFFFFFFFFFFFFFFULL,
+
+ /** Register I/O memory. Write-only, takes a netio_ipp_address_t. */
+ NETIO_IPP_IOMEM_REGISTER_OFF = 0x7000000000000000ULL,
+
+ /** Unregister I/O memory. Write-only, takes a netio_ipp_address_t. */
+ NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+ /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+ * userspace code due to limitations in the pread/pwrite syscalls. */
+
+ /** Drain LIPP buffers. */
+ NETIO_IPP_DRAIN_OFF = 0xFA00000000000000ULL,
+
+ /** Supply a netio_ipp_address_t to be used as shared memory for the
+ * LEPP command queue. */
+ NETIO_EPP_SHM_OFF = 0xFB00000000000000ULL,
+
+ /* 0xFC... is currently unused. */
+
+ /** Stop IPP/EPP tiles. Write-only, takes a dummy argument. */
+ NETIO_IPP_STOP_SHIM_OFF = 0xFD00000000000000ULL,
+
+ /** Start IPP/EPP tiles. Write-only, takes a dummy argument. */
+ NETIO_IPP_START_SHIM_OFF = 0xFE00000000000000ULL,
+
+ /** Supply packet arena. Write-only, takes an array of
+ * netio_ipp_address_t values. */
+ NETIO_IPP_ADDRESS_OFF = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off) ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off) ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+ struct
+ {
+ uint64_t addr:48; /**< Class-specific address */
+ unsigned int class:8; /**< Class (e.g., NETIO_PARAM) */
+ unsigned int opcode:8; /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+ }
+ bits; /**< Bitfields */
+ uint64_t word; /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+ NETIO_FASTIO_ALLOCATE = 0, /**< Get empty packet buffer */
+ NETIO_FASTIO_FREE_BUFFER = 1, /**< Give buffer back to IPP */
+ NETIO_FASTIO_RETURN_CREDITS = 2, /**< Give credits to IPP */
+ NETIO_FASTIO_SEND_PKT_NOCK = 3, /**< Send a packet, no checksum */
+ NETIO_FASTIO_SEND_PKT_CK = 4, /**< Send a packet, with checksum */
+ NETIO_FASTIO_SEND_PKT_VEC = 5, /**< Send a vector of packets */
+ NETIO_FASTIO_SENDV_PKT = 6, /**< Sendv one packet */
+ NETIO_FASTIO_NUM_INDEX = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+ int err; /**< Error code. */
+ uint32_t val0; /**< Value. Meaning depends upon the specific call. */
+ uint32_t val1; /**< Value. Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+ uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+ uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \
+ __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \
+ size, va, handle)
+
+/** Send packet, calculate checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ * @param csum0 Shim checksum header.
+ * @param csum1 Checksum seed.
+ */
+#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \
+ csum0, csum1) \
+ __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \
+ size, va, handle, csum0, csum1)
+
+
+/** Format for the "csum0" argument to the __netio_fastio_send routines
+ * and LEPP. Note that this is currently exactly identical to the
+ * ShimProtocolOffloadHeader.
+ */
+typedef union
+{
+ struct
+ {
+ unsigned int start_byte:7; /**< The first byte to be checksummed */
+ unsigned int count:14; /**< Number of bytes to be checksummed. */
+ unsigned int destination_byte:7; /**< The byte to write the checksum to. */
+ unsigned int reserved:4; /**< Reserved. */
+ } bits; /**< Decomposed method of access. */
+ unsigned int word; /**< To send out the IDN. */
+} __netio_checksum_header_t;
+
+
+/** Sendv packet with 1 or 2 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ * 1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment, if 2 segments.
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ * segment, if 2 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \
+ va_F, va_L, len_F_L) \
+ __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L)
+
+/** Send packet on PCIe interface.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe.
+ * @param va_F Virtual address of the packet buffer.
+ * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0.
+ * @param len_F_L Length of the packet buffer in low 16 bits.
+ */
+#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \
+ va_F, va_L, len_F_L) \
+ __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L)
+
+/** Sendv packet with 3 or 4 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ * 1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment (third segment if 3 segments,
+ * fourth segment if 4 segments).
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ * segment in high 16 bits.
+ * @param va_M0 Virtual address of "middle 0" segment; this segment is sent
+ * second when there are three segments, and third if there are four.
+ * @param va_M1 Virtual address of "middle 1" segment; this segment is sent
+ * second when there are four segments.
+ * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle
+ * 1 segment, if 4 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \
+ va_L, len_F_L, va_M0, va_M1, len_M0_M1) \
+ __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1)
+
+/** Send vector of packets.
+ * @param fastio_index Fast I/O index.
+ * @param seqno Number of packets transmitted so far on this interface;
+ * used to decide which packets should be acknowledged.
+ * @param nentries Number of entries in vector.
+ * @param va Virtual address of start of vector entry array.
+ * @return 3-word netio_fastio_rv3_t structure. The structure's err member
+ * is an error code, or zero if no error. The val0 member is the
+ * updated value of seqno; it has been incremented by 1 for each
+ * packet sent. That increment may be less than nentries if an
+ * error occured, or if some of the entries in the vector contain
+ * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the
+ * updated value of nentries; it has been decremented by 1 for each
+ * vector entry processed. Again, that decrement may be less than
+ * nentries (leaving the returned value positive) if an error
+ * occurred.
+ */
+#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \
+ __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \
+ nentries, va)
+
+
+/** An egress DMA command for LEPP. */
+typedef struct
+{
+ /** Is this a TSO transfer?
+ *
+ * NOTE: This field is always 0, to distinguish it from
+ * lepp_tso_cmd_t. It must come first!
+ */
+ uint8_t tso : 1;
+
+ /** Unused padding bits. */
+ uint8_t _unused : 3;
+
+ /** Should this packet be sent directly from caches instead of DRAM,
+ * using hash-for-home to locate the packet data?
+ */
+ uint8_t hash_for_home : 1;
+
+ /** Should we compute a checksum? */
+ uint8_t compute_checksum : 1;
+
+ /** Is this the final buffer for this packet?
+ *
+ * A single packet can be split over several input buffers (a "gather"
+ * operation). This flag indicates that this is the last buffer
+ * in a packet.
+ */
+ uint8_t end_of_packet : 1;
+
+ /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */
+ uint8_t send_completion : 1;
+
+ /** High bits of Client Physical Address of the start of the buffer
+ * to be egressed.
+ *
+ * NOTE: Only 6 bits are actually needed here, as CPAs are
+ * currently 38 bits. So two bits could be scavenged from this.
+ */
+ uint8_t cpa_hi;
+
+ /** The number of bytes to be egressed. */
+ uint16_t length;
+
+ /** Low 32 bits of Client Physical Address of the start of the buffer
+ * to be egressed.
+ */
+ uint32_t cpa_lo;
+
+ /** Checksum information (only used if 'compute_checksum'). */
+ __netio_checksum_header_t checksum_data;
+
+} lepp_cmd_t;
+
+
+/** A chunk of physical memory for a TSO egress. */
+typedef struct
+{
+ /** The low bits of the CPA. */
+ uint32_t cpa_lo;
+ /** The high bits of the CPA. */
+ uint16_t cpa_hi : 15;
+ /** Should this packet be sent directly from caches instead of DRAM,
+ * using hash-for-home to locate the packet data?
+ */
+ uint16_t hash_for_home : 1;
+ /** The length in bytes. */
+ uint16_t length;
+} lepp_frag_t;
+
+
+/** An LEPP command that handles TSO. */
+typedef struct
+{
+ /** Is this a TSO transfer?
+ *
+ * NOTE: This field is always 1, to distinguish it from
+ * lepp_cmd_t. It must come first!
+ */
+ uint8_t tso : 1;
+
+ /** Unused padding bits. */
+ uint8_t _unused : 7;
+
+ /** Size of the header[] array in bytes. It must be in the range
+ * [40, 127], which are the smallest header for a TCP packet over
+ * Ethernet and the maximum possible prepend size supported by
+ * hardware, respectively. Note that the array storage must be
+ * padded out to a multiple of four bytes so that the following
+ * LEPP command is aligned properly.
+ */
+ uint8_t header_size;
+
+ /** Byte offset of the IP header in header[]. */
+ uint8_t ip_offset;
+
+ /** Byte offset of the TCP header in header[]. */
+ uint8_t tcp_offset;
+
+ /** The number of bytes to use for the payload of each packet,
+ * except of course the last one, which may not have enough bytes.
+ * This means that each Ethernet packet except the last will have a
+ * size of header_size + payload_size.
+ */
+ uint16_t payload_size;
+
+ /** The length of the 'frags' array that follows this struct. */
+ uint16_t num_frags;
+
+ /** The actual frags. */
+ lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */];
+
+ /*
+ * The packet header template logically follows frags[],
+ * but you can't declare that in C.
+ *
+ * uint32_t header[header_size_in_words_rounded_up];
+ */
+
+} lepp_tso_cmd_t;
+
+
+/** An LEPP completion ring entry. */
+typedef void* lepp_comp_t;
+
+
+/** Maximum number of frags for one TSO command. This is adapted from
+ * linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
+ * our page size of exactly 65536. We add one for a "body" fragment.
+ */
+#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+
+/** Total number of bytes needed for an lepp_tso_cmd_t. */
+#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
+ (sizeof(lepp_tso_cmd_t) + \
+ (num_frags) * sizeof(lepp_frag_t) + \
+ (((header_size) + 3) & -4))
+
+/** The size of the lepp "cmd" queue. */
+#define LEPP_CMD_QUEUE_BYTES \
+ (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \
+ (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t))
+
+/** The largest possible command that can go in lepp_queue_t::cmds[]. */
+#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128)
+
+/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive).
+ */
+#define LEPP_CMD_LIMIT \
+ (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE)
+
+/** The maximum number of completions in an LEPP queue. */
+#define LEPP_COMP_QUEUE_SIZE \
+ ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t))
+
+/** Increment an index modulo the queue size. */
+#define LEPP_QINC(var) \
+ (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1))
+
+/** A queue used to convey egress commands from the client to LEPP. */
+typedef struct
+{
+ /** Index of first completion not yet processed by user code.
+ * If this is equal to comp_busy, there are no such completions.
+ *
+ * NOTE: This is only read/written by the user.
+ */
+ unsigned int comp_head;
+
+ /** Index of first completion record not yet completed.
+ * If this is equal to comp_tail, there are no such completions.
+ * This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever
+ * a command with the 'completion' bit set is finished.
+ *
+ * NOTE: This is only written by LEPP, only read by the user.
+ */
+ volatile unsigned int comp_busy;
+
+ /** Index of the first empty slot in the completion ring.
+ * Entries from this up to but not including comp_head (in ring order)
+ * can be filled in with completion data.
+ *
+ * NOTE: This is only read/written by the user.
+ */
+ unsigned int comp_tail;
+
+ /** Byte index of first command enqueued for LEPP but not yet processed.
+ *
+ * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+ *
+ * NOTE: LEPP advances this counter as soon as it no longer needs
+ * the cmds[] storage for this entry, but the transfer is not actually
+ * complete (i.e. the buffer pointed to by the command is no longer
+ * needed) until comp_busy advances.
+ *
+ * If this is equal to cmd_tail, the ring is empty.
+ *
+ * NOTE: This is only written by LEPP, only read by the user.
+ */
+ volatile unsigned int cmd_head;
+
+ /** Byte index of first empty slot in the command ring. This field can
+ * be incremented up to but not equal to cmd_head (because that would
+ * mean the ring is empty).
+ *
+ * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+ *
+ * NOTE: This is read/written by the user, only read by LEPP.
+ */
+ volatile unsigned int cmd_tail;
+
+ /** A ring of variable-sized egress DMA commands.
+ *
+ * NOTE: Only written by the user, only read by LEPP.
+ */
+ char cmds[LEPP_CMD_QUEUE_BYTES]
+ __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+
+ /** A ring of user completion data.
+ * NOTE: Only read/written by the user.
+ */
+ lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE]
+ __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+} lepp_queue_t;
+
+
+/** An internal helper function for determining the number of entries
+ * available in a ring buffer, given that there is one sentinel.
+ */
+static inline unsigned int
+_lepp_num_free_slots(unsigned int head, unsigned int tail)
+{
+ /*
+ * One entry is reserved for use as a sentinel, to distinguish
+ * "empty" from "full". So we compute
+ * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation.
+ */
+ return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0);
+}
+
+
+/** Returns how many new comp entries can be enqueued. */
+static inline unsigned int
+lepp_num_free_comp_slots(const lepp_queue_t* q)
+{
+ return _lepp_num_free_slots(q->comp_head, q->comp_tail);
+}
+
+static inline int
+lepp_qsub(int v1, int v2)
+{
+ int delta = v1 - v2;
+ return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE);
+}
+
+
+/** FIXME: Check this from linux, via a new "pwrite()" call. */
+#define LIPP_VERSION 1
+
+
+/** We use exactly two bytes of alignment padding. */
+#define LIPP_PACKET_PADDING 2
+
+/** The minimum size of a "small" buffer (including the padding). */
+#define LIPP_SMALL_PACKET_SIZE 128
+
+/*
+ * NOTE: The following two values should total to less than around
+ * 13582, to keep the total size used for "lipp_state_t" below 64K.
+ */
+
+/** The maximum number of "small" buffers.
+ * This is enough for 53 network cpus with 128 credits. Note that
+ * if these are exhausted, we will fall back to using large buffers.
+ */
+#define LIPP_SMALL_BUFFERS 6785
+
+/** The maximum number of "large" buffers.
+ * This is enough for 53 network cpus with 128 credits.
+ */
+#define LIPP_LARGE_BUFFERS 6785
+
+#endif /* __DRV_XGBE_INTF_H__ */
--- /dev/null
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * Error codes returned from NetIO routines.
+ */
+
+#ifndef __NETIO_ERRORS_H__
+#define __NETIO_ERRORS_H__
+
+/**
+ * @addtogroup error
+ *
+ * @brief The error codes returned by NetIO functions.
+ *
+ * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and
+ * a negative value if an error occurs.
+ *
+ * In cases where a NetIO function failed due to a error reported by
+ * system libraries, the error code will be the negation of the
+ * system errno at the time of failure. The @ref netio_strerror()
+ * function will deliver error strings for both NetIO and system error
+ * codes.
+ *
+ * @{
+ */
+
+/** The set of all NetIO errors. */
+typedef enum
+{
+ /** Operation successfully completed. */
+ NETIO_NO_ERROR = 0,
+
+ /** A packet was successfully retrieved from an input queue. */
+ NETIO_PKT = 0,
+
+ /** Largest NetIO error number. */
+ NETIO_ERR_MAX = -701,
+
+ /** The tile is not registered with the IPP. */
+ NETIO_NOT_REGISTERED = -701,
+
+ /** No packet was available to retrieve from the input queue. */
+ NETIO_NOPKT = -702,
+
+ /** The requested function is not implemented. */
+ NETIO_NOT_IMPLEMENTED = -703,
+
+ /** On a registration operation, the target queue already has the maximum
+ * number of tiles registered for it, and no more may be added. On a
+ * packet send operation, the output queue is full and nothing more can
+ * be queued until some of the queued packets are actually transmitted. */
+ NETIO_QUEUE_FULL = -704,
+
+ /** The calling process or thread is not bound to exactly one CPU. */
+ NETIO_BAD_AFFINITY = -705,
+
+ /** Cannot allocate memory on requested controllers. */
+ NETIO_CANNOT_HOME = -706,
+
+ /** On a registration operation, the IPP specified is not configured
+ * to support the options requested; for instance, the application
+ * wants a specific type of tagged headers which the configured IPP
+ * doesn't support. Or, the supplied configuration information is
+ * not self-consistent, or is out of range; for instance, specifying
+ * both NETIO_RECV and NETIO_NO_RECV, or asking for more than
+ * NETIO_MAX_SEND_BUFFERS to be preallocated. On a VLAN or bucket
+ * configure operation, the number of items, or the base item, was
+ * out of range.
+ */
+ NETIO_BAD_CONFIG = -707,
+
+ /** Too many tiles have registered to transmit packets. */
+ NETIO_TOOMANY_XMIT = -708,
+
+ /** Packet transmission was attempted on a queue which was registered
+ with transmit disabled. */
+ NETIO_UNREG_XMIT = -709,
+
+ /** This tile is already registered with the IPP. */
+ NETIO_ALREADY_REGISTERED = -710,
+
+ /** The Ethernet link is down. The application should try again later. */
+ NETIO_LINK_DOWN = -711,
+
+ /** An invalid memory buffer has been specified. This may be an unmapped
+ * virtual address, or one which does not meet alignment requirements.
+ * For netio_input_register(), this error may be returned when multiple
+ * processes specify different memory regions to be used for NetIO
+ * buffers. That can happen if these processes specify explicit memory
+ * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init()
+ * has not been called by a common ancestor of the processes.
+ */
+ NETIO_FAULT = -712,
+
+ /** Cannot combine user-managed shared memory and cache coherence. */
+ NETIO_BAD_CACHE_CONFIG = -713,
+
+ /** Smallest NetIO error number. */
+ NETIO_ERR_MIN = -713,
+
+#ifndef __DOXYGEN__
+ /** Used internally to mean that no response is needed; never returned to
+ * an application. */
+ NETIO_NO_RESPONSE = 1
+#endif
+} netio_error_t;
+
+/** @} */
+
+#endif /* __NETIO_ERRORS_H__ */
--- /dev/null
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * NetIO interface structures and macros.
+ */
+
+#ifndef __NETIO_INTF_H__
+#define __NETIO_INTF_H__
+
+#include <hv/netio_errors.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__)
+#include <assert.h>
+#define netio_assert assert /**< Enable assertions from macros */
+#else
+#define netio_assert(...) ((void)(0)) /**< Disable assertions from macros */
+#endif
+
+/*
+ * If none of these symbols are defined, we're building libnetio in an
+ * environment where we have pthreads, so we'll enable locking.
+ */
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \
+ !defined(__NEWLIB__)
+#define _NETIO_PTHREAD /**< Include a mutex in netio_queue_t below */
+
+/*
+ * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on
+ * per-packet NetIO operations. We still do pthread locking on things
+ * like netio_input_register, though. This is used for building
+ * libnetio_unlocked.
+ */
+#ifndef NETIO_UNLOCKED
+
+/* Avoid PLT overhead by using our own inlined per-cpu lock. */
+#include <sched.h>
+typedef int _netio_percpu_mutex_t;
+
+static __inline int
+_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock)
+{
+ *lock = 0;
+ return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock)
+{
+ while (__builtin_expect(__insn_tns(lock), 0))
+ sched_yield();
+ return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock)
+{
+ *lock = 0;
+ return 0;
+}
+
+#else /* NETIO_UNLOCKED */
+
+/* Don't do any locking for per-packet NetIO operations. */
+typedef int _netio_percpu_mutex_t;
+#define _netio_percpu_mutex_init(L)
+#define _netio_percpu_mutex_lock(L)
+#define _netio_percpu_mutex_unlock(L)
+
+#endif /* NETIO_UNLOCKED */
+#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */
+
+/** How many tiles can register for a given queue.
+ * @ingroup setup */
+#define NETIO_MAX_TILES_PER_QUEUE 64
+
+
+/** Largest permissible queue identifier.
+ * @ingroup setup */
+#define NETIO_MAX_QUEUE_ID 255
+
+
+#ifndef __DOXYGEN__
+
+/* Metadata packet checksum/ethertype flags. */
+
+/** The L4 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L4_CSUM_SHIFT 0
+#define _NETIO_PKT_NO_L4_CSUM_RMASK 1
+#define _NETIO_PKT_NO_L4_CSUM_MASK \
+ (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT)
+
+/** The L3 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L3_CSUM_SHIFT 1
+#define _NETIO_PKT_NO_L3_CSUM_RMASK 1
+#define _NETIO_PKT_NO_L3_CSUM_MASK \
+ (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT)
+
+/** The L3 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L3_CSUM_SHIFT 2
+#define _NETIO_PKT_BAD_L3_CSUM_RMASK 1
+#define _NETIO_PKT_BAD_L3_CSUM_MASK \
+ (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT)
+
+/** The Ethernet packet type is unrecognized. */
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT 3
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK 1
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \
+ (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \
+ _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT)
+
+/* Metadata packet type flags. */
+
+/** Where the packet type bits are; this field is the index into
+ * _netio_pkt_info. */
+#define _NETIO_PKT_TYPE_SHIFT 4
+#define _NETIO_PKT_TYPE_RMASK 0x3F
+
+/** How many VLAN tags the packet has, and, if we have two, which one we
+ * actually grouped on. A VLAN within a proprietary (Marvell or Broadcom)
+ * tag is counted here. */
+#define _NETIO_PKT_VLAN_SHIFT 4
+#define _NETIO_PKT_VLAN_RMASK 0x3
+#define _NETIO_PKT_VLAN_MASK \
+ (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT)
+#define _NETIO_PKT_VLAN_NONE 0 /* No VLAN tag. */
+#define _NETIO_PKT_VLAN_ONE 1 /* One VLAN tag. */
+#define _NETIO_PKT_VLAN_TWO_OUTER 2 /* Two VLAN tags, outer one used. */
+#define _NETIO_PKT_VLAN_TWO_INNER 3 /* Two VLAN tags, inner one used. */
+
+/** Which proprietary tags the packet has. */
+#define _NETIO_PKT_TAG_SHIFT 6
+#define _NETIO_PKT_TAG_RMASK 0x3
+#define _NETIO_PKT_TAG_MASK \
+ (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT)
+#define _NETIO_PKT_TAG_NONE 0 /* No proprietary tags. */
+#define _NETIO_PKT_TAG_MRVL 1 /* Marvell HyperG.Stack tags. */
+#define _NETIO_PKT_TAG_MRVL_EXT 2 /* HyperG.Stack extended tags. */
+#define _NETIO_PKT_TAG_BRCM 3 /* Broadcom HiGig tags. */
+
+/** Whether a packet has an LLC + SNAP header. */
+#define _NETIO_PKT_SNAP_SHIFT 8
+#define _NETIO_PKT_SNAP_RMASK 0x1
+#define _NETIO_PKT_SNAP_MASK \
+ (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT)
+
+/* NOTE: Bits 9 and 10 are unused. */
+
+/** Length of any custom data before the L2 header, in words. */
+#define _NETIO_PKT_CUSTOM_LEN_SHIFT 11
+#define _NETIO_PKT_CUSTOM_LEN_RMASK 0x1F
+#define _NETIO_PKT_CUSTOM_LEN_MASK \
+ (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT)
+
+/** The L4 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16
+#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1
+#define _NETIO_PKT_BAD_L4_CSUM_MASK \
+ (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT)
+
+/** Length of the L2 header, in words. */
+#define _NETIO_PKT_L2_LEN_SHIFT 17
+#define _NETIO_PKT_L2_LEN_RMASK 0x1F
+#define _NETIO_PKT_L2_LEN_MASK \
+ (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT)
+
+
+/* Flags in minimal packet metadata. */
+
+/** We need an eDMA checksum on this packet. */
+#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT 0
+#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK 1
+#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \
+ (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT)
+
+/* Data within the packet information table. */
+
+/* Note that, for efficiency, code which uses these fields assumes that none
+ * of the shift values below are zero. See uses below for an explanation. */
+
+/** Offset within the L2 header of the innermost ethertype (in halfwords). */
+#define _NETIO_PKT_INFO_ETYPE_SHIFT 6
+#define _NETIO_PKT_INFO_ETYPE_RMASK 0x1F
+
+/** Offset within the L2 header of the VLAN tag (in halfwords). */
+#define _NETIO_PKT_INFO_VLAN_SHIFT 11
+#define _NETIO_PKT_INFO_VLAN_RMASK 0x1F
+
+#endif
+
+
+/** The size of a memory buffer representing a small packet.
+ * @ingroup egress */
+#define SMALL_PACKET_SIZE 256
+
+/** The size of a memory buffer representing a large packet.
+ * @ingroup egress */
+#define LARGE_PACKET_SIZE 2048
+
+/** The size of a memory buffer representing a jumbo packet.
+ * @ingroup egress */
+#define JUMBO_PACKET_SIZE (12 * 1024)
+
+
+/* Common ethertypes.
+ * @ingroup ingress */
+/** @{ */
+/** The ethertype of IPv4. */
+#define ETHERTYPE_IPv4 (0x0800)
+/** The ethertype of ARP. */
+#define ETHERTYPE_ARP (0x0806)
+/** The ethertype of VLANs. */
+#define ETHERTYPE_VLAN (0x8100)
+/** The ethertype of a Q-in-Q header. */
+#define ETHERTYPE_Q_IN_Q (0x9100)
+/** The ethertype of IPv6. */
+#define ETHERTYPE_IPv6 (0x86DD)
+/** The ethertype of MPLS. */
+#define ETHERTYPE_MPLS (0x8847)
+/** @} */
+
+
+/** The possible return values of NETIO_PKT_STATUS.
+ * @ingroup ingress
+ */
+typedef enum
+{
+ /** No problems were detected with this packet. */
+ NETIO_PKT_STATUS_OK,
+ /** The packet is undersized; this is expected behavior if the packet's
+ * ethertype is unrecognized, but otherwise the packet is likely corrupt. */
+ NETIO_PKT_STATUS_UNDERSIZE,
+ /** The packet is oversized and some trailing bytes have been discarded.
+ This is expected behavior for short packets, since it's impossible to
+ precisely determine the amount of padding which may have been added to
+ them to make them meet the minimum Ethernet packet size. */
+ NETIO_PKT_STATUS_OVERSIZE,
+ /** The packet was judged to be corrupt by hardware (for instance, it had
+ a bad CRC, or part of it was discarded due to lack of buffer space in
+ the I/O shim) and should be discarded. */
+ NETIO_PKT_STATUS_BAD
+} netio_pkt_status_t;
+
+
+/** Log2 of how many buckets we have. */
+#define NETIO_LOG2_NUM_BUCKETS (10)
+
+/** How many buckets we have.
+ * @ingroup ingress */
+#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS)
+
+
+/**
+ * @brief A group-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given group.
+ */
+typedef union {
+ /** The header broken down into bits. */
+ struct {
+ /** Whether we should balance on L4, if available */
+ unsigned int __balance_on_l4:1;
+ /** Whether we should balance on L3, if available */
+ unsigned int __balance_on_l3:1;
+ /** Whether we should balance on L2, if available */
+ unsigned int __balance_on_l2:1;
+ /** Reserved for future use */
+ unsigned int __reserved:1;
+ /** The base bucket to use to send traffic */
+ unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS;
+ /** The mask to apply to the balancing value. This must be one less
+ * than a power of two, e.g. 0x3 or 0xFF.
+ */
+ unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS;
+ /** Pad to 32 bits */
+ unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS);
+ } bits;
+ /** To send out the IDN. */
+ unsigned int word;
+}
+netio_group_t;
+
+
+/**
+ * @brief A VLAN-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given VLAN.
+ */
+typedef netio_group_t netio_vlan_t;
+
+
+/**
+ * A bucket-to-queue mapping.
+ * @ingroup setup
+ */
+typedef unsigned char netio_bucket_t;
+
+
+/**
+ * A packet size can always fit in a netio_size_t.
+ * @ingroup setup
+ */
+typedef unsigned int netio_size_t;
+
+
+/**
+ * @brief Ethernet standard (ingress) packet metadata.
+ *
+ * @ingroup ingress
+ *
+ * This is additional data associated with each packet.
+ * This structure is opaque and accessed through the @ref ingress.
+ *
+ * Also, the buffer population operation currently assumes that standard
+ * metadata is at least as large as minimal metadata, and will need to be
+ * modified if that is no longer the case.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[24];
+#else
+ /** The overall ordinal of the packet */
+ unsigned int __packet_ordinal;
+ /** The ordinal of the packet within the group */
+ unsigned int __group_ordinal;
+ /** The best flow hash IPP could compute. */
+ unsigned int __flow_hash;
+ /** Flags pertaining to checksum calculation, packet type, etc. */
+ unsigned int __flags;
+ /** The first word of "user data". */
+ unsigned int __user_data_0;
+ /** The second word of "user data". */
+ unsigned int __user_data_1;
+#endif
+}
+netio_pkt_metadata_t;
+
+
+/** To ensure that the L3 header is aligned mod 4, the L2 header should be
+ * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes
+ * long. The standard way to do this is to simply add 2 bytes of padding
+ * before the L2 header.
+ */
+#define NETIO_PACKET_PADDING 2
+
+
+
+/**
+ * @brief Ethernet minimal (egress) packet metadata.
+ *
+ * @ingroup egress
+ *
+ * This structure represents information about packets which have
+ * been processed by @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer(). This structure is opaque
+ * and accessed through the @ref egress.
+ *
+ * @internal This structure is actually copied into the memory used by
+ * standard metadata, which is assumed to be large enough.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[14];
+#else
+ /** The offset of the L2 header from the start of the packet data. */
+ unsigned short l2_offset;
+ /** The offset of the L3 header from the start of the packet data. */
+ unsigned short l3_offset;
+ /** Where to write the checksum. */
+ unsigned char csum_location;
+ /** Where to start checksumming from. */
+ unsigned char csum_start;
+ /** Flags pertaining to checksum calculation etc. */
+ unsigned short flags;
+ /** The L2 length of the packet. */
+ unsigned short l2_length;
+ /** The checksum with which to seed the checksum generator. */
+ unsigned short csum_seed;
+ /** How much to checksum. */
+ unsigned short csum_length;
+#endif
+}
+netio_pkt_minimal_metadata_t;
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * @brief An I/O notification header.
+ *
+ * This is the first word of data received from an I/O shim in a notification
+ * packet. It contains framing and status information.
+ */
+typedef union
+{
+ unsigned int word; /**< The whole word. */
+ /** The various fields. */
+ struct
+ {
+ unsigned int __channel:7; /**< Resource channel. */
+ unsigned int __type:4; /**< Type. */
+ unsigned int __ack:1; /**< Whether an acknowledgement is needed. */
+ unsigned int __reserved:1; /**< Reserved. */
+ unsigned int __protocol:1; /**< A protocol-specific word is added. */
+ unsigned int __status:2; /**< Status of the transfer. */
+ unsigned int __framing:2; /**< Framing of the transfer. */
+ unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */
+ } bits;
+}
+__netio_pkt_notif_t;
+
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_HANDLE_BASE(p) \
+ ((unsigned char*)((p).word & 0xFFFFFFC0))
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_BASE(p) \
+ _NETIO_PKT_HANDLE_BASE(p->__packet)
+
+/**
+ * @brief An I/O notification packet (second word)
+ *
+ * This is the second word of data received from an I/O shim in a notification
+ * packet. This is the virtual address of the packet buffer, plus some flag
+ * bits. (The virtual address of the packet is always 256-byte aligned so we
+ * have room for 8 bits' worth of flags in the low 8 bits.)
+ *
+ * @internal
+ * NOTE: The low two bits must contain "__queue", so the "packet size"
+ * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly.
+ *
+ * If __addr or __offset are moved, _NETIO_PKT_BASE
+ * (defined right below this) must be changed.
+ */
+typedef union
+{
+ unsigned int word; /**< The whole word. */
+ /** The various fields. */
+ struct
+ {
+ /** Which queue the packet will be returned to once it is sent back to
+ the IPP. This is one of the SIZE_xxx values. */
+ unsigned int __queue:2;
+
+ /** The IPP handle of the sending IPP. */
+ unsigned int __ipp_handle:2;
+
+ /** Reserved for future use. */
+ unsigned int __reserved:1;
+
+ /** If 1, this packet has minimal (egress) metadata; otherwise, it
+ has standard (ingress) metadata. */
+ unsigned int __minimal:1;
+
+ /** Offset of the metadata within the packet. This value is multiplied
+ * by 64 and added to the base packet address to get the metadata
+ * address. Note that this field is aligned within the word such that
+ * you can easily extract the metadata address with a 26-bit mask. */
+ unsigned int __offset:2;
+
+ /** The top 24 bits of the packet's virtual address. */
+ unsigned int __addr:24;
+ } bits;
+}
+__netio_pkt_handle_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/**
+ * @brief A handle for an I/O packet's storage.
+ * @ingroup ingress
+ *
+ * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its
+ * packet metadata removed. It is a much smaller type that exists to
+ * facilitate applications where the full ::netio_pkt_t type is too
+ * large, such as those that cache enormous numbers of packets or wish
+ * to transmit packet descriptors over the UDN.
+ *
+ * Because there is no metadata, most ::netio_pkt_t operations cannot be
+ * performed on a netio_pkt_handle_t. It supports only
+ * netio_free_handle() (to free the buffer) and
+ * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents).
+ * The application must acquire any additional metadata it wants from the
+ * original ::netio_pkt_t and record it separately.
+ *
+ * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling
+ * NETIO_PKT_HANDLE(). An invalid handle (analogous to NULL) can be
+ * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can
+ * be tested for validity with NETIO_PKT_HANDLE_IS_VALID().
+ */
+typedef struct
+{
+ unsigned int word; /**< Opaque bits. */
+} netio_pkt_handle_t;
+
+/**
+ * @brief A packet descriptor.
+ *
+ * @ingroup ingress
+ * @ingroup egress
+ *
+ * This data structure represents a packet. The structure is manipulated
+ * through the @ref ingress and the @ref egress.
+ *
+ * While the contents of a netio_pkt_t are opaque, the structure itself is
+ * portable. This means that it may be shared between all tiles which have
+ * done a netio_input_register() call for the interface on which the pkt_t
+ * was initially received (via netio_get_packet()) or retrieved (via
+ * netio_get_buffer()). The contents of a netio_pkt_t can be transmitted to
+ * another tile via shared memory, or via a UDN message, or by other means.
+ * The destination tile may then use the pkt_t as if it had originally been
+ * received locally; it may read or write the packet's data, read its
+ * metadata, free the packet, send the packet, transfer the netio_pkt_t to
+ * yet another tile, and so forth.
+ *
+ * Once a netio_pkt_t has been transferred to a second tile, the first tile
+ * should not reference the original copy; in particular, if more than one
+ * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will
+ * become corrupted. Note also that each tile which reads or modifies
+ * packet data must obey the memory coherency rules outlined in @ref input.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[32];
+#else
+ /** For an ingress packet (one with standard metadata), this is the
+ * notification header we got from the I/O shim. For an egress packet
+ * (one with minimal metadata), this word is zero if the packet has not
+ * been populated, and nonzero if it has. */
+ __netio_pkt_notif_t __notif_header;
+
+ /** Virtual address of the packet buffer, plus state flags. */
+ __netio_pkt_handle_t __packet;
+
+ /** Metadata associated with the packet. */
+ netio_pkt_metadata_t __metadata;
+#endif
+}
+netio_pkt_t;
+
+
+#ifndef __DOXYGEN__
+
+#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal)
+#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags)
+
+/* Packet information table, used by the attribute access functions below. */
+extern const uint16_t _netio_pkt_info[];
+
+#endif /* __DOXYGEN__ */
+
+
+#ifndef __DOXYGEN__
+/* These macros are deprecated and will disappear in a future MDE release. */
+#define NETIO_PKT_GOOD_CHECKSUM(pkt) \
+ NETIO_PKT_L4_CSUM_CORRECT(pkt)
+#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \
+ NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt)
+#endif /* __DOXYGEN__ */
+
+
+/* Packet attribute access functions. */
+
+/** Return a pointer to the metadata for a packet.
+ * @ingroup ingress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_M" suffix usually improves performance. This
+ * function must be called on an 'ingress' packet (i.e. one retrieved
+ * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer have not been called). Use of this
+ * function on an 'egress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_metadata_t*
+NETIO_PKT_METADATA(netio_pkt_t* pkt)
+{
+ netio_assert(!pkt->__packet.bits.__minimal);
+ return &pkt->__metadata;
+}
+
+
+/** Return a pointer to the minimal metadata for a packet.
+ * @ingroup egress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_MM" suffix usually improves performance. This
+ * function must be called on an 'egress' packet (i.e. one on which
+ * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer()
+ * have been called, or one retrieved by @ref netio_get_buffer()). Use of
+ * this function on an 'ingress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_minimal_metadata_t*
+NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+ netio_assert(pkt->__packet.bits.__minimal);
+ return (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+}
+
+
+/** Determine whether a packet has 'minimal' metadata.
+ * @ingroup pktfuncs
+ *
+ * This function will return nonzero if the packet is an 'egress'
+ * packet (i.e. one on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer() have been called, or one
+ * retrieved by @ref netio_get_buffer()), and zero if the packet
+ * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(),
+ * which has not been converted into an 'egress' packet).
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet has minimal metadata.
+ */
+static __inline unsigned int
+NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt)
+{
+ return pkt->__packet.bits.__minimal;
+}
+
+
+/** Return a handle for a packet's storage.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A handle for the packet's storage.
+ */
+static __inline netio_pkt_handle_t
+NETIO_PKT_HANDLE(netio_pkt_t* pkt)
+{
+ netio_pkt_handle_t h;
+ h.word = pkt->__packet.word;
+ return h;
+}
+
+
+/** A special reserved value indicating the absence of a packet handle.
+ *
+ * @ingroup pktfuncs
+ */
+#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 })
+
+
+/** Test whether a packet handle is valid.
+ *
+ * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE
+ * to indicate no packet at all. This function tests to see if a packet
+ * handle is a real handle, not this special reserved value.
+ *
+ * @ingroup pktfuncs
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return One if the packet handle is valid, else zero.
+ */
+static __inline unsigned int
+NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle)
+{
+ return handle.word != 0;
+}
+
+
+
+/** Return a pointer to the start of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle)
+{
+ return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING;
+}
+
+
+/** Return the length of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ /*
+ * Note that we effectively need to extract a quantity from the flags word
+ * which is measured in words, and then turn it into bytes by shifting
+ * it left by 2. We do this all at once by just shifting right two less
+ * bits, and shifting the mask up two bits.
+ */
+ return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) &
+ (_NETIO_PKT_CUSTOM_LEN_RMASK << 2));
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size -
+ NETIO_PACKET_PADDING);
+}
+
+
+/** Return a pointer to the start of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt));
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ /*
+ * Note that we effectively need to extract a quantity from the flags word
+ * which is measured in words, and then turn it into bytes by shifting
+ * it left by 2. We do this all at once by just shifting right two less
+ * bits, and shifting the mask up two bits. We then add two bytes.
+ */
+ return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) &
+ (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2;
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) -
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the start of the packet's L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) +
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally,
+ * the IP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_LENGTH_M(mda, pkt) -
+ NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup ingress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_DATA_M(mda, pkt) +
+ NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero. (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.) The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals. Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__packet_ordinal;
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values. In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.) The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals. Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__group_ordinal;
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value will be zero if the packet does not have a VLAN tag, or if
+ * this value was not extracted from the packet.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK;
+ unsigned short* pkt_p;
+ int index;
+ unsigned short val;
+
+ if (vl == _NETIO_PKT_VLAN_NONE)
+ return 0;
+
+ pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+ index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+ val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) &
+ _NETIO_PKT_INFO_VLAN_RMASK];
+
+#ifdef __TILECC__
+ return (__insn_bytex(val) >> 16) & 0xFFF;
+#else
+ return (__builtin_bswap32(val) >> 16) & 0xFFF;
+#endif
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+ int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+ unsigned short val =
+ pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) &
+ _NETIO_PKT_INFO_ETYPE_RMASK];
+
+ return __builtin_bswap32(val) >> 16;
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__flow_hash;
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__user_data_0;
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__user_data_1;
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ * be correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags &
+ (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK));
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ * correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags &
+ (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK));
+}
+
+
+/** Determine whether the ethertype was recognized and L3 packet data was
+ * processed.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the ethertype was recognized and L3 packet data was
+ * processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK);
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length. Normally, applications should use
+ * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ * its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) &&
+ (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) ||
+ NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD));
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return mmd->l2_length;
+}
+
+
+/** Return the length of the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+ return mmd->l3_offset - mmd->l2_offset;
+}
+
+
+/** Return the length of the packet, starting with the L3 (IP) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) -
+ NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup egress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return _NETIO_PKT_BASE(pkt) + mmd->l3_offset;
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return _NETIO_PKT_BASE(pkt) + mmd->l2_offset;
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length. Normally, applications should use
+ * @ref NETIO_PKT_BAD() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS(netio_pkt_t* pkt)
+{
+ netio_assert(!pkt->__packet.bits.__minimal);
+
+ return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ * its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_BAD_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt);
+}
+
+
+/** Return a pointer to the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_DATA_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_DATA_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_DATA_M(mda, pkt);
+ }
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally, the IP)
+ * header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L3_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup pktfuncs
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L3_DATA_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_DATA_M(mda, pkt);
+ }
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero. (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.) The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals. Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values. In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.) The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals. Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This is usually also contained within the packet header. If the packet
+ * does not have a VLAN tag, the VLAN ID returned by this function is zero.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_VLAN_ID_M(mda, pkt);
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ETHERTYPE_M(mda, pkt);
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_FLOW_HASH_M(mda, pkt);
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_USER_DATA_0_M(mda, pkt);
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_USER_DATA_1_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ * be correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ * correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the Ethertype was recognized and L3 packet data was
+ * processed.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the Ethertype was recognized and L3 packet data was
+ * processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt);
+}
+
+
+/** Set an egress packet's L2 length, using a metadata pointer to speed the
+ * computation.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt,
+ int len)
+{
+ mmd->l2_length = len;
+}
+
+
+/** Set an egress packet's L2 length.
+ * @ingroup egress
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set an egress packet's L2 header length, using a metadata pointer to
+ * speed the computation.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet. It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt, int len)
+{
+ mmd->l3_offset = mmd->l2_offset + len;
+}
+
+
+/** Set an egress packet's L2 header length.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet. It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set up an egress packet for hardware checksum computation, using a
+ * metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * NetIO provides the ability to automatically calculate a standard
+ * 16-bit Internet checksum on transmitted packets. The application
+ * may specify the point in the packet where the checksum starts, the
+ * number of bytes to be checksummed, and the two bytes in the packet
+ * which will be replaced with the completed checksum. (If the range
+ * of bytes to be checksummed includes the bytes to be replaced, the
+ * initial values of those bytes will be included in the checksum.)
+ *
+ * For some protocols, the packet checksum covers data which is not present
+ * in the packet, or is at least not contiguous to the main data payload.
+ * For instance, the TCP checksum includes a "pseudo-header" which includes
+ * the source and destination IP addresses of the packet. To accommodate
+ * this, the checksum engine may be "seeded" with an initial value, which
+ * the application would need to compute based on the specific protocol's
+ * requirements. Note that the seed is given in host byte order (little-
+ * endian), not network byte order (big-endian); code written to compute a
+ * pseudo-header checksum in network byte order will need to byte-swap it
+ * before use as the seed.
+ *
+ * Note that the checksum is computed as part of the transmission process,
+ * so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ * the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ * the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ * to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ * packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt, int start, int length,
+ int location, uint16_t seed)
+{
+ mmd->csum_start = start;
+ mmd->csum_length = length;
+ mmd->csum_location = location;
+ mmd->csum_seed = seed;
+ mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK;
+}
+
+
+/** Set up an egress packet for hardware checksum computation.
+ * @ingroup egress
+ *
+ * NetIO provides the ability to automatically calculate a standard
+ * 16-bit Internet checksum on transmitted packets. The application
+ * may specify the point in the packet where the checksum starts, the
+ * number of bytes to be checksummed, and the two bytes in the packet
+ * which will be replaced with the completed checksum. (If the range
+ * of bytes to be checksummed includes the bytes to be replaced, the
+ * initial values of those bytes will be included in the checksum.)
+ *
+ * For some protocols, the packet checksum covers data which is not present
+ * in the packet, or is at least not contiguous to the main data payload.
+ * For instance, the TCP checksum includes a "pseudo-header" which includes
+ * the source and destination IP addresses of the packet. To accommodate
+ * this, the checksum engine may be "seeded" with an initial value, which
+ * the application would need to compute based on the specific protocol's
+ * requirements. Note that the seed is given in host byte order (little-
+ * endian), not network byte order (big-endian); code written to compute a
+ * pseudo-header checksum in network byte order will need to byte-swap it
+ * before use as the seed.
+ *
+ * Note that the checksum is computed as part of the transmission process,
+ * so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ * the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ * the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ * to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ * packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length,
+ int location, uint16_t seed)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ * metadata pointer to speed the operation.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ *
+ * @param[in,out] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (pkt->__packet.bits.__offset << 6) +
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ * metadata pointer to speed the operation.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset;
+}
+
+
+/** Return the number of bytes which could be prepended to a packet.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt);
+ }
+}
+
+
+/** Flush a packet's minimal metadata from the cache, using a metadata pointer
+ * to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache, using a metadata
+ * pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache,
+ * using a metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache, using a metadata pointer
+ * to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache, using a metadata
+ * pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache,
+ * using a metadata pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+/** Number of NUMA nodes we can distribute buffers to.
+ * @ingroup setup */
+#define NETIO_NUM_NODE_WEIGHTS 16
+
+/**
+ * @brief An object for specifying the characteristics of NetIO communication
+ * endpoint.
+ *
+ * @ingroup setup
+ *
+ * The @ref netio_input_register() function uses this structure to define
+ * how an application tile will communicate with an IPP.
+ *
+ *
+ * Future updates to NetIO may add new members to this structure,
+ * which can affect the success of the registration operation. Thus,
+ * if dynamically initializing the structure, applications are urged to
+ * zero it out first, for example:
+ *
+ * @code
+ * netio_input_config_t config;
+ * memset(&config, 0, sizeof (config));
+ * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE;
+ * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS;
+ * config.queue_id = 0;
+ * .
+ * .
+ * .
+ * @endcode
+ *
+ * since that guarantees that any unused structure members, including
+ * members which did not exist when the application was first developed,
+ * will not have unexpected values.
+ *
+ * If statically initializing the structure, we strongly recommend use of
+ * C99-style named initializers, for example:
+ *
+ * @code
+ * netio_input_config_t config = {
+ * .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE,
+ * .num_receive_packets = NETIO_MAX_RECEIVE_PKTS,
+ * .queue_id = 0,
+ * },
+ * @endcode
+ *
+ * instead of the old-style structure initialization:
+ *
+ * @code
+ * // Bad example! Currently equivalent to the above, but don't do this.
+ * netio_input_config_t config = {
+ * NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0
+ * },
+ * @endcode
+ *
+ * since the C99 style requires no changes to the code if elements of the
+ * config structure are rearranged. (It also makes the initialization much
+ * easier to understand.)
+ *
+ * Except for items which address a particular tile's transmit or receive
+ * characteristics, such as the ::NETIO_RECV flag, applications are advised
+ * to specify the same set of configuration data on all registrations.
+ * This prevents differing results if multiple tiles happen to do their
+ * registration operations in a different order on different invocations of
+ * the application. This is particularly important for things like link
+ * management flags, and buffer size and homing specifications.
+ *
+ * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO
+ * buffer pool is automatically created and mapped into the application's
+ * virtual address space at an address chosen by the operating system,
+ * using the common memory (cmem) facility in the Tilera Multicore
+ * Components library. The cmem facility allows multiple processes to gain
+ * access to shared memory which is mapped into each process at an
+ * identical virtual address. In order for this to work, the processes
+ * must have a common ancestor, which must create the common memory using
+ * tmc_cmem_init().
+ *
+ * In programs using the iLib process creation API, or in programs which use
+ * only one process (which include programs using the pthreads library),
+ * tmc_cmem_init() is called automatically. All other applications
+ * must call it explicitly, before any child processes which might call
+ * netio_input_register() are created.
+ */
+typedef struct
+{
+ /** Registration characteristics.
+
+ This value determines several characteristics of the registration;
+ flags for different types of behavior are ORed together to make the
+ final flag value. Generally applications should specify exactly
+ one flag from each of the following categories:
+
+ - Whether the application will be receiving packets on this queue
+ (::NETIO_RECV or ::NETIO_NO_RECV).
+
+ - Whether the application will be transmitting packets on this queue,
+ and if so, whether it will request egress checksum calculation
+ (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT). It is
+ legal to call netio_get_buffer() without one of the XMIT flags,
+ as long as ::NETIO_RECV is specified; in this case, the retrieved
+ buffers must be passed to another tile for transmission.
+
+ - Whether the application expects any vendor-specific tags in
+ its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM,
+ or ::NETIO_TAG_MRVL). This must match the configuration of the
+ target IPP.
+
+ To accommodate applications written to previous versions of the NetIO
+ interface, none of the flags above are currently required; if omitted,
+ NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM |
+ ::NETIO_TAG_NONE were used. However, explicit specification of
+ the relevant flags allows NetIO to do a better job of resource
+ allocation, allows earlier detection of certain configuration errors,
+ and may enable advanced features or higher performance in the future,
+ so their use is strongly recommended.
+
+ Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT
+ is a special case, intended primarily for use by programs which
+ retrieve network statistics or do link management operations.
+ When these flags are both specified, the resulting queue may not
+ be used with NetIO routines other than netio_get(), netio_set(),
+ and netio_input_unregister(). See @ref link for more information
+ on link management.
+
+ Other flags are optional; their use is described below.
+ */
+ int flags;
+
+ /** Interface name. This is a string which identifies the specific
+ Ethernet controller hardware to be used. The format of the string
+ is a device type and a device index, separated by a slash; so,
+ the first 10 Gigabit Ethernet controller is named "xgbe/0", while
+ the second 10/100/1000 Megabit Ethernet controller is named "gbe/1".
+ */
+ const char* interface;
+
+ /** Receive packet queue size. This specifies the maximum number
+ of ingress packets that can be received on this queue without
+ being retrieved by @ref netio_get_packet(). If the IPP's distribution
+ algorithm calls for a packet to be sent to this queue, and this
+ number of packets are already pending there, the new packet
+ will either be discarded, or sent to another tile registered
+ for the same queue_id (see @ref drops). This value must
+ be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least
+ ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain
+ interfaces.
+ */
+ int num_receive_packets;
+
+ /** The queue ID being requested. Legal values for this range from 0
+ to ::NETIO_MAX_QUEUE_ID, inclusive. ::NETIO_MAX_QUEUE_ID is always
+ greater than or equal to the number of tiles; this allows one queue
+ for each tile, plus at least one additional queue. Some applications
+ may wish to use the additional queue as a destination for unwanted
+ packets, since packets delivered to queues for which no tiles have
+ registered are discarded.
+ */
+ unsigned int queue_id;
+
+ /** Maximum number of small send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds
+ empty small egress buffers requested from the IPP but not yet
+ retrieved via @ref netio_get_buffer(). This value must be greater
+ than zero if the application will ever use @ref netio_get_buffer()
+ to allocate empty small egress buffers; it may be no larger than
+ ::NETIO_MAX_SEND_BUFFERS. See @ref epp for more details on empty
+ buffer caching.
+ */
+ int num_send_buffers_small_total;
+
+ /** Number of small send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty small egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_small_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_small_prealloc;
+
+ /** Maximum number of large send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds empty
+ large egress buffers requested from the IPP but not yet retrieved via
+ @ref netio_get_buffer(). This value must be greater than zero if the
+ application will ever use @ref netio_get_buffer() to allocate empty
+ large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+ See @ref epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_large_total;
+
+ /** Number of large send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty large egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_large_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_large_prealloc;
+
+ /** Maximum number of jumbo send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds empty
+ jumbo egress buffers requested from the IPP but not yet retrieved via
+ @ref netio_get_buffer(). This value must be greater than zero if the
+ application will ever use @ref netio_get_buffer() to allocate empty
+ jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+ See @ref epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_jumbo_total;
+
+ /** Number of jumbo send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty jumbo egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_jumbo_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_jumbo_prealloc;
+
+ /** Total packet buffer size. This determines the total size, in bytes,
+ of the NetIO buffer pool. Note that the maximum number of available
+ buffers of each size is determined during hypervisor configuration
+ (see the <em>System Programmer's Guide</em> for details); this just
+ influences how much host memory is allocated for those buffers.
+
+ The buffer pool is allocated from common memory, which will be
+ automatically initialized if needed. If your buffer pool is larger
+ than 240 MB, you might need to explicitly call @c tmc_cmem_init(),
+ as described in the Application Libraries Reference Manual (UG227).
+
+ Packet buffers are currently allocated in chunks of 16 MB; this
+ value will be rounded up to the next larger multiple of 16 MB.
+ If this value is zero, a default of 32 MB will be used; this was
+ the value used by previous versions of NetIO. Note that taking this
+ default also affects the placement of buffers on Linux NUMA nodes.
+ See @ref buffer_node_weights for an explanation of buffer placement.
+
+ In order to successfully allocate packet buffers, Linux must have
+ available huge pages on the relevant Linux NUMA nodes. See the
+ <em>System Programmer's Guide</em> for information on configuring
+ huge page support in Linux.
+ */
+ uint64_t total_buffer_size;
+
+ /** Buffer placement weighting factors.
+
+ This array specifies the relative amount of buffering to place
+ on each of the available Linux NUMA nodes. This array is
+ indexed by the NUMA node, and the values in the array are
+ proportional to the amount of buffer space to allocate on that
+ node.
+
+ If memory striping is enabled in the Hypervisor, then there is
+ only one logical NUMA node (node 0). In that case, NetIO will by
+ default ignore the suggested buffer node weights, and buffers
+ will be striped across the physical memory controllers. See
+ UG209 System Programmer's Guide for a description of the
+ hypervisor option that controls memory striping.
+
+ If memory striping is disabled, then there are up to four NUMA
+ nodes, corresponding to the four DDRAM controllers in the TILE
+ processor architecture. See UG100 Tile Processor Architecture
+ Overview for a diagram showing the location of each of the DDRAM
+ controllers relative to the tile array.
+
+ For instance, if memory striping is disabled, the following
+ configuration strucure:
+
+ @code
+ netio_input_config_t config = {
+ .
+ .
+ .
+ .total_buffer_size = 4 * 16 * 1024 * 1024;
+ .buffer_node_weights = { 1, 0, 1, 0 },
+ },
+ @endcode
+
+ would result in 32 MB of buffers being placed on controller 0, and
+ 32 MB on controller 2. (Since buffers are allocated in units of
+ 16 MB, some sets of weights will not be able to be matched exactly.)
+
+ For the weights to be effective, @ref total_buffer_size must be
+ nonzero. If @ref total_buffer_size is zero, causing the default
+ 32 MB of buffer space to be used, then any specified weights will
+ be ignored, and buffers will positioned as they were in previous
+ versions of NetIO:
+
+ - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1,
+ and the other 16 MB will be placed on controller 2.
+
+ - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2,
+ and the other 16 MB will be placed on controller 3.
+
+ If @ref total_buffer_size is nonzero, but all weights are zero,
+ then all buffer space will be allocated on Linux NUMA node zero.
+
+ By default, the specified buffer placement is treated as a hint;
+ if sufficient free memory is not available on the specified
+ controllers, the buffers will be allocated elsewhere. However,
+ if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a
+ failure to allocate buffer space exactly as requested will cause the
+ registration operation to fail with an error of ::NETIO_CANNOT_HOME.
+
+ Note that maximal network performance cannot be achieved with
+ only one memory controller.
+ */
+ uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS];
+
+ /** Fixed virtual address for packet buffers. Only valid when
+ ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the
+ description of that flag for details.
+ */
+ void* fixed_buffer_va;
+
+ /**
+ Maximum number of outstanding send packet requests. This value is
+ only relevant when an EPP is in use; it determines the number of
+ slots in the EPP's outgoing packet queue which this tile is allowed
+ to consume, and thus the number of packets which may be sent before
+ the sending tile must wait for an acknowledgment from the EPP.
+ Modifying this value is generally only helpful when using @ref
+ netio_send_packet_vector(), where it can help improve performance by
+ allowing a single vector send operation to process more packets.
+ Typically it is not specified, and the default, which divides the
+ outgoing packet slots evenly between all tiles on the chip, is used.
+
+ If a registration asks for more outgoing packet queue slots than are
+ available, ::NETIO_TOOMANY_XMIT will be returned. The total number
+ of packet queue slots which are available for all tiles for each EPP
+ is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING.
+
+
+ This value is ignored if ::NETIO_XMIT is not specified in flags.
+ If you want to specify a large value here for a specific tile, you are
+ advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so
+ that they do not consume a default number of packet slots. Any tile
+ transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING
+ slots allocated to it; values less than that will be silently
+ increased by the NetIO library.
+ */
+ int num_sends_outstanding;
+}
+netio_input_config_t;
+
+
+/** Registration flags; used in the @ref netio_input_config_t structure.
+ * @addtogroup setup
+ */
+/** @{ */
+
+/** Fail a registration request if we can't put packet buffers
+ on the specified memory controllers. */
+#define NETIO_STRICT_HOMING 0x00000002
+
+/** This application expects no tags on its L2 headers. */
+#define NETIO_TAG_NONE 0x00000004
+
+/** This application expects Marvell extended tags on its L2 headers. */
+#define NETIO_TAG_MRVL 0x00000008
+
+/** This application expects Broadcom tags on its L2 headers. */
+#define NETIO_TAG_BRCM 0x00000010
+
+/** This registration may call routines which receive packets. */
+#define NETIO_RECV 0x00000020
+
+/** This registration may not call routines which receive packets. */
+#define NETIO_NO_RECV 0x00000040
+
+/** This registration may call routines which transmit packets. */
+#define NETIO_XMIT 0x00000080
+
+/** This registration may call routines which transmit packets with
+ checksum acceleration. */
+#define NETIO_XMIT_CSUM 0x00000100
+
+/** This registration may not call routines which transmit packets. */
+#define NETIO_NO_XMIT 0x00000200
+
+/** This registration wants NetIO buffers mapped at an application-specified
+ virtual address.
+
+ NetIO buffers are by default created by the TMC common memory facility,
+ which must be configured by a common ancestor of all processes sharing
+ a network interface. When this flag is specified, NetIO buffers are
+ instead mapped at an address chosen by the application (and specified
+ in @ref netio_input_config_t::fixed_buffer_va). This allows multiple
+ unrelated but cooperating processes to share a NetIO interface.
+ All processes sharing the same interface must specify this flag,
+ and all must specify the same fixed virtual address.
+
+ @ref netio_input_config_t::fixed_buffer_va must be a
+ multiple of 16 MB, and the packet buffers will occupy @ref
+ netio_input_config_t::total_buffer_size bytes of virtual address
+ space, beginning at that address. If any of those virtual addresses
+ are currently occupied by other memory objects, like application or
+ shared library code or data, @ref netio_input_register() will return
+ ::NETIO_FAULT. While it is impossible to provide a fixed_buffer_va
+ which will work for all applications, a good first guess might be to
+ use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size.
+ If that fails, it might be helpful to consult the running application's
+ virtual address description file (/proc/<em>pid</em>/maps) to see
+ which regions of virtual address space are available.
+ */
+#define NETIO_FIXED_BUFFER_VA 0x00000400
+
+/** This registration call will not complete unless the network link
+ is up. The process will wait several seconds for this to happen (the
+ precise interval is link-dependent), but if the link does not come up,
+ ::NETIO_LINK_DOWN will be returned. This flag is the default if
+ ::NETIO_NOREQUIRE_LINK_UP is not specified. Note that this flag by
+ itself does not request that the link be brought up; that can be done
+ with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the
+ latter is the default if no NETIO_AUTO_LINK_xxx flags are specified),
+ or by explicitly setting the link's desired state via netio_set().
+ If the link is not brought up by one of those methods, and this flag
+ is specified, the registration operation will return ::NETIO_LINK_DOWN.
+ This flag is ignored if it is specified along with ::NETIO_NO_XMIT and
+ ::NETIO_NO_RECV. See @ref link for more information on link
+ management.
+ */
+#define NETIO_REQUIRE_LINK_UP 0x00000800
+
+/** This registration call will complete even if the network link is not up.
+ Whenever the link is not up, packets will not be sent or received:
+ netio_get_packet() will return ::NETIO_NOPKT once all queued packets
+ have been drained, and netio_send_packet() and similar routines will
+ return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP
+ or the I/O shim is full. See @ref link for more information on link
+ management.
+ */
+#define NETIO_NOREQUIRE_LINK_UP 0x00001000
+
+#ifndef __DOXYGEN__
+/*
+ * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags,
+ * but should not be used directly by applications, and are thus not
+ * documented.
+ */
+#define _NETIO_AUTO_UP 0x00002000
+#define _NETIO_AUTO_DN 0x00004000
+#define _NETIO_AUTO_PRESENT 0x00008000
+#endif
+
+/** Set the desired state of the link to up, allowing any speeds which are
+ supported by the link hardware, as part of this registration operation.
+ Do not take down the link automatically. This is the default if
+ no other NETIO_AUTO_LINK_xxx flags are specified. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UP (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP)
+
+/** Set the desired state of the link to up, allowing any speeds which are
+ supported by the link hardware, as part of this registration operation.
+ Set the desired state of the link to down the next time no tiles are
+ registered for packet reception or transmission. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UPDN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \
+ _NETIO_AUTO_DN)
+
+/** Set the desired state of the link to down the next time no tiles are
+ registered for packet reception or transmission. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_DN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN)
+
+/** Do not bring up the link automatically as part of this registration
+ operation. Do not take down the link automatically. This flag
+ is ignored if it is specified along with ::NETIO_NO_XMIT and
+ ::NETIO_NO_RECV. See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_NONE _NETIO_AUTO_PRESENT
+
+
+/** Minimum number of receive packets. */
+#define NETIO_MIN_RECEIVE_PKTS 16
+
+/** Lower bound on the maximum number of receive packets; may be higher
+ than this on some interfaces. */
+#define NETIO_MAX_RECEIVE_PKTS 128
+
+/** Maximum number of send buffers, per packet size. */
+#define NETIO_MAX_SEND_BUFFERS 16
+
+/** Number of EPP queue slots, and thus outstanding sends, per EPP. */
+#define NETIO_TOTAL_SENDS_OUTSTANDING 2015
+
+/** Minimum number of EPP queue slots, and thus outstanding sends, per
+ * transmitting tile. */
+#define NETIO_MIN_SENDS_OUTSTANDING 16
+
+
+/**@}*/
+
+#ifndef __DOXYGEN__
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+struct __netio_queue_impl_t;
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+struct __netio_queue_user_impl_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/** A netio_queue_t describes a NetIO communications endpoint.
+ * @ingroup setup
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ uint8_t opaque[8]; /**< This is an opaque structure. */
+#else
+ struct __netio_queue_impl_t* __system_part; /**< The system part. */
+ struct __netio_queue_user_impl_t* __user_part; /**< The user part. */
+#ifdef _NETIO_PTHREAD
+ _netio_percpu_mutex_t lock; /**< Queue lock. */
+#endif
+#endif
+}
+netio_queue_t;
+
+
+/**
+ * @brief Packet send context.
+ *
+ * @ingroup egress
+ *
+ * Packet send context for use with netio_send_packet_prepare and _commit.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ uint8_t opaque[44]; /**< This is an opaque structure. */
+#else
+ uint8_t flags; /**< Defined below */
+ uint8_t datalen; /**< Number of valid words pointed to by data. */
+ uint32_t request[9]; /**< Request to be sent to the EPP or shim. Note
+ that this is smaller than the 11-word maximum
+ request size, since some constant values are
+ not saved in the context. */
+ uint32_t *data; /**< Data to be sent to the EPP or shim via IDN. */
+#endif
+}
+netio_send_pkt_context_t;
+
+
+#ifndef __DOXYGEN__
+#define SEND_PKT_CTX_USE_EPP 1 /**< We're sending to an EPP. */
+#define SEND_PKT_CTX_SEND_CSUM 2 /**< Request includes a checksum. */
+#endif
+
+/**
+ * @brief Packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * This data structure is used with netio_send_packet_vector() to send multiple
+ * packets with one NetIO call. The structure should be initialized by
+ * calling netio_pkt_vector_set(), rather than by setting the fields
+ * directly.
+ *
+ * This structure is guaranteed to be a power of two in size, no
+ * bigger than one L2 cache line, and to be aligned modulo its size.
+ */
+typedef struct
+#ifndef __DOXYGEN__
+__attribute__((aligned(8)))
+#endif
+{
+ /** Reserved for use by the user application. When initialized with
+ * the netio_set_pkt_vector_entry() function, this field is guaranteed
+ * to be visible to readers only after all other fields are already
+ * visible. This way it can be used as a valid flag or generation
+ * counter. */
+ uint8_t user_data;
+
+ /* Structure members below this point should not be accessed directly by
+ * applications, as they may change in the future. */
+
+ /** Low 8 bits of the packet address to send. The high bits are
+ * acquired from the 'handle' field. */
+ uint8_t buffer_address_low;
+
+ /** Number of bytes to transmit. */
+ uint16_t size;
+
+ /** The raw handle from a netio_pkt_t. If this is NETIO_PKT_HANDLE_NONE,
+ * this vector entry will be skipped and no packet will be transmitted. */
+ netio_pkt_handle_t handle;
+}
+netio_pkt_vector_entry_t;
+
+
+/**
+ * @brief Initialize fields in a packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * @param[out] v Pointer to the vector entry to be initialized.
+ * @param[in] pkt Packet to be transmitted when the vector entry is passed to
+ * netio_send_packet_vector(). Note that the packet's attributes
+ * (e.g., its L2 offset and length) are captured at the time this
+ * routine is called; subsequent changes in those attributes will not
+ * be reflected in the packet which is actually transmitted.
+ * Changes in the packet's contents, however, will be so reflected.
+ * If this is NULL, no packet will be transmitted.
+ * @param[in] user_data User data to be set in the vector entry.
+ * This function guarantees that the "user_data" field will become
+ * visible to a reader only after all other fields have become visible.
+ * This allows a structure in a ring buffer to be written and read
+ * by a polling reader without any locks or other synchronization.
+ */
+static __inline void
+netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt,
+ uint8_t user_data)
+{
+ if (pkt)
+ {
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd =
+ (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+ v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF;
+ v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = &pkt->__metadata;
+ v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF;
+ v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt);
+ }
+ v->handle.word = pkt->__packet.word;
+ }
+ else
+ {
+ v->handle.word = 0; /* Set handle to NETIO_PKT_HANDLE_NONE. */
+ }
+
+ __asm__("" : : : "memory");
+
+ v->user_data = user_data;
+}
+
+
+/**
+ * Flags and structures for @ref netio_get() and @ref netio_set().
+ * @ingroup config
+ */
+
+/** @{ */
+/** Parameter class; addr is a NETIO_PARAM_xxx value. */
+#define NETIO_PARAM 0
+/** Interface MAC address. This address is only valid with @ref netio_get().
+ * The value is a 6-byte MAC address. Depending upon the overall system
+ * design, a MAC address may or may not be available for each interface. */
+#define NETIO_PARAM_MAC 0
+
+/** Determine whether to suspend output on the receipt of pause frames.
+ * If the value is nonzero, the I/O shim will suspend output when a pause
+ * frame is received. If the value is zero, pause frames will be ignored. */
+#define NETIO_PARAM_PAUSE_IN 1
+
+/** Determine whether to send pause frames if the I/O shim packet FIFOs are
+ * nearly full. If the value is zero, pause frames are not sent. If
+ * the value is nonzero, it is the delay value which will be sent in any
+ * pause frames which are output, in units of 512 bit times. */
+#define NETIO_PARAM_PAUSE_OUT 2
+
+/** Jumbo frame support. The value is a 4-byte integer. If the value is
+ * nonzero, the MAC will accept frames of up to 10240 bytes. If the value
+ * is zero, the MAC will only accept frames of up to 1544 bytes. */
+#define NETIO_PARAM_JUMBO 3
+
+/** I/O shim's overflow statistics register. The value is two 16-bit integers.
+ * The first 16-bit value (or the low 16 bits, if the value is treated as a
+ * 32-bit number) is the count of packets which were completely dropped and
+ * not delivered by the shim. The second 16-bit value (or the high 16 bits,
+ * if the value is treated as a 32-bit number) is the count of packets
+ * which were truncated and thus only partially delivered by the shim. This
+ * register is automatically reset to zero after it has been read.
+ */
+#define NETIO_PARAM_OVERFLOW 4
+
+/** IPP statistics. This address is only valid with @ref netio_get(). The
+ * value is a netio_stat_t structure. Unlike the I/O shim statistics, the
+ * IPP statistics are not all reset to zero on read; see the description
+ * of the netio_stat_t for details. */
+#define NETIO_PARAM_STAT 5
+
+/** Possible link state. The value is a combination of "NETIO_LINK_xxx"
+ * flags. With @ref netio_get(), this will indicate which flags are
+ * actually supported by the hardware.
+ *
+ * For historical reasons, specifying this value to netio_set() will have
+ * the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is
+ * discouraged.
+ */
+#define NETIO_PARAM_LINK_POSSIBLE_STATE 6
+
+/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags.
+ * With @ref netio_set(), this will attempt to immediately bring up the
+ * link using whichever of the requested flags are supported by the
+ * hardware, or take down the link if the flags are zero; if this is
+ * not possible, an error will be returned. Many programs will want
+ * to use ::NETIO_PARAM_LINK_DESIRED_STATE instead.
+ *
+ * For historical reasons, specifying this value to netio_get() will
+ * have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE,
+ * but this usage is discouraged.
+ */
+#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE
+
+/** Current link state. This address is only valid with @ref netio_get().
+ * The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together.
+ * If the link is down, the value ANDed with NETIO_LINK_SPEED will be
+ * zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will
+ * result in exactly one of the NETIO_LINK_xxx values, indicating the
+ * current speed. */
+#define NETIO_PARAM_LINK_CURRENT_STATE 7
+
+/** Variant symbol for current state, retained for compatibility with
+ * pre-MDE-2.1 programs. */
+#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE
+
+/** Packet Coherence protocol. This address is only valid with @ref netio_get().
+ * The value is nonzero if the interface is configured for cache-coherent DMA.
+ */
+#define NETIO_PARAM_COHERENT 8
+
+/** Desired link state. The value is a conbination of "NETIO_LINK_xxx"
+ * flags, which specify the desired state for the link. With @ref
+ * netio_set(), this will, in the background, attempt to bring up the link
+ * using whichever of the requested flags are reasonable, or take down the
+ * link if the flags are zero. The actual link up or down operation may
+ * happen after this call completes. If the link state changes in the
+ * future, the system will continue to try to get back to the desired link
+ * state; for instance, if the link is brought up successfully, and then
+ * the network cable is disconnected, the link will go down. However, the
+ * desired state of the link is still up, so if the cable is reconnected,
+ * the link will be brought up again.
+ *
+ * With @ref netio_get(), this will indicate the desired state for the
+ * link, as set with a previous netio_set() call, or implicitly by a
+ * netio_input_register() or netio_input_unregister() operation. This may
+ * not reflect the current state of the link; to get that, use
+ * ::NETIO_PARAM_LINK_CURRENT_STATE. */
+#define NETIO_PARAM_LINK_DESIRED_STATE 9
+
+/** NetIO statistics structure. Retrieved using the ::NETIO_PARAM_STAT
+ * address passed to @ref netio_get(). */
+typedef struct
+{
+ /** Number of packets which have been received by the IPP and forwarded
+ * to a tile's receive queue for processing. This value wraps at its
+ * maximum, and is not cleared upon read. */
+ uint32_t packets_received;
+
+ /** Number of packets which have been dropped by the IPP, because they could
+ * not be received, or could not be forwarded to a tile. The former happens
+ * when the IPP does not have a free packet buffer of suitable size for an
+ * incoming frame. The latter happens when all potential destination tiles
+ * for a packet, as defined by the group, bucket, and queue configuration,
+ * have full receive queues. This value wraps at its maximum, and is not
+ * cleared upon read. */
+ uint32_t packets_dropped;
+
+ /*
+ * Note: the #defines after each of the following four one-byte values
+ * denote their location within the third word of the netio_stat_t. They
+ * are intended for use only by the IPP implementation and are thus omitted
+ * from the Doxygen output.
+ */
+
+ /** Number of packets dropped because no worker was able to accept a new
+ * packet. This value saturates at its maximum, and is cleared upon
+ * read. */
+ uint8_t drops_no_worker;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_WORKER 0
+#endif
+
+ /** Number of packets dropped because no small buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_smallbuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_SMALLBUF 1
+#endif
+
+ /** Number of packets dropped because no large buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_largebuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_LARGEBUF 2
+#endif
+
+ /** Number of packets dropped because no jumbo buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_jumbobuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_JUMBOBUF 3
+#endif
+}
+netio_stat_t;
+
+
+/** Link can run, should run, or is running at 10 Mbps. */
+#define NETIO_LINK_10M 0x01
+
+/** Link can run, should run, or is running at 100 Mbps. */
+#define NETIO_LINK_100M 0x02
+
+/** Link can run, should run, or is running at 1 Gbps. */
+#define NETIO_LINK_1G 0x04
+
+/** Link can run, should run, or is running at 10 Gbps. */
+#define NETIO_LINK_10G 0x08
+
+/** Link should run at the highest speed supported by the link and by
+ * the device connected to the link. Only usable as a value for
+ * the link's desired state; never returned as a value for the current
+ * or possible states. */
+#define NETIO_LINK_ANYSPEED 0x10
+
+/** All legal link speeds. */
+#define NETIO_LINK_SPEED (NETIO_LINK_10M | \
+ NETIO_LINK_100M | \
+ NETIO_LINK_1G | \
+ NETIO_LINK_10G | \
+ NETIO_LINK_ANYSPEED)
+
+
+/** MAC register class. Addr is a register offset within the MAC.
+ * Registers within the XGbE and GbE MACs are documented in the Tile
+ * Processor I/O Device Guide (UG104). MAC registers start at address
+ * 0x4000, and do not include the MAC_INTERFACE registers. */
+#define NETIO_MAC 1
+
+/** MDIO register class (IEEE 802.3 clause 22 format). Addr is the "addr"
+ * member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO 2
+
+/** MDIO register class (IEEE 802.3 clause 45 format). Addr is the "addr"
+ * member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO_CLAUSE45 3
+
+/** NetIO MDIO address type. Retrieved or provided using the ::NETIO_MDIO
+ * address passed to @ref netio_get() or @ref netio_set(). */
+typedef union
+{
+ struct
+ {
+ unsigned int reg:16; /**< MDIO register offset. For clause 22 access,
+ must be less than 32. */
+ unsigned int phy:5; /**< Which MDIO PHY to access. */
+ unsigned int dev:5; /**< Which MDIO device to access within that PHY.
+ Applicable for clause 45 access only; ignored
+ for clause 22 access. */
+ }
+ bits; /**< Container for bitfields. */
+ uint64_t addr; /**< Value to pass to @ref netio_get() or
+ * @ref netio_set(). */
+}
+netio_mdio_addr_t;
+
+/** @} */
+
+#endif /* __NETIO_INTF_H__ */
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_PCI) += pci.o
#include <linux/kdev_t.h>
#include <linux/fs.h>
#include <linux/fcntl.h>
-#include <linux/smp_lock.h>
#include <linux/uaccess.h>
#include <linux/signal.h>
#include <asm/syscalls.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
return ret;
}
+/* The assembly shim for this function arranges to ignore the return value. */
long compat_sys_rt_sigreturn(struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame =
(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
lw r20, r20
/* Jump to syscall handler. */
- jalr r20; .Lhandle_syscall_link:
- FEEDBACK_REENTER(handle_syscall)
+ jalr r20
+.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
/*
* Write our r0 onto the stack so it gets restored instead
PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
sw r29, r0
+.Lsyscall_sigreturn_skip:
+ FEEDBACK_REENTER(handle_syscall)
+
/* Do syscall trace again, if requested. */
lw r30, r31
andi r30, r30, _TIF_SYSCALL_TRACE
}; \
STD_ENDPROC(_##x)
+/*
+ * Special-case sigreturn to not write r0 to the stack on return.
+ * This is technically more efficient, but it also avoids difficulties
+ * in the 64-bit OS when handling 32-bit compat code, since we must not
+ * sign-extend r0 for the sigreturn return-value case.
+ */
+#define PTREGS_SYSCALL_SIGRETURN(x, reg) \
+ STD_ENTRY(_##x); \
+ addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
+ { \
+ PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
+ j x \
+ }; \
+ STD_ENDPROC(_##x)
+
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
-PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
--- /dev/null
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+#include <asm/hv_driver.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+
+/*
+ * Initialization flow and process
+ * -------------------------------
+ *
+ * This files containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ *
+ * There are two entry points here:
+ * 1) tile_pci_init
+ * This sets up the pci_controller structs, and opens the
+ * FDs to the hypervisor. This is called from setup_arch() early
+ * in the boot process.
+ * 2) pcibios_init
+ * This probes the PCI bus(es) for any attached hardware. It's
+ * called by subsys_initcall. All of the real work is done by the
+ * generic Linux PCI layer.
+ *
+ */
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+int __write_once tile_plx_gen1;
+
+static struct pci_controller controllers[TILE_NUM_PCIE];
+static int num_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+
+/*
+ * We don't need to worry about the alignment of resources.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Open a FD to the hypervisor PCI device.
+ *
+ * controller_id is the controller number, config type is 0 or 1 for
+ * config0 or config1 operations.
+ */
+static int __init tile_pcie_open(int controller_id, int config_type)
+{
+ char filename[32];
+ int fd;
+
+ sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
+
+ fd = hv_dev_open((HV_VirtAddr)filename, 0);
+
+ return fd;
+}
+
+
+/*
+ * Get the IRQ numbers from the HV and set up the handlers for them.
+ */
+static int __init tile_init_irqs(int controller_id,
+ struct pci_controller *controller)
+{
+ char filename[32];
+ int fd;
+ int ret;
+ int x;
+ struct pcie_rc_config rc_config;
+
+ sprintf(filename, "pcie/%d/ctl", controller_id);
+ fd = hv_dev_open((HV_VirtAddr)filename, 0);
+ if (fd < 0) {
+ pr_err("PCI: hv_dev_open(%s) failed\n", filename);
+ return -1;
+ }
+ ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
+ sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
+ hv_dev_close(fd);
+ if (ret != sizeof(rc_config)) {
+ pr_err("PCI: wanted %zd bytes, got %d\n",
+ sizeof(rc_config), ret);
+ return -1;
+ }
+ /* Record irq_base so that we can map INTx to IRQ # later. */
+ controller->irq_base = rc_config.intr;
+
+ for (x = 0; x < 4; x++)
+ tile_irq_activate(rc_config.intr + x,
+ TILE_IRQ_HW_CLEAR);
+
+ if (rc_config.plx_gen1)
+ controller->plx_gen1 = 1;
+
+ return 0;
+}
+
+/*
+ * First initialization entry point, called from setup_arch().
+ *
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Returns the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+ int i;
+
+ pr_info("PCI: Searching for controllers...\n");
+
+ /* Do any configuration we need before using the PCIe */
+
+ for (i = 0; i < TILE_NUM_PCIE; i++) {
+ int hv_cfg_fd0 = -1;
+ int hv_cfg_fd1 = -1;
+ int hv_mem_fd = -1;
+ char name[32];
+ struct pci_controller *controller;
+
+ /*
+ * Open the fd to the HV. If it fails then this
+ * device doesn't exist.
+ */
+ hv_cfg_fd0 = tile_pcie_open(i, 0);
+ if (hv_cfg_fd0 < 0)
+ continue;
+ hv_cfg_fd1 = tile_pcie_open(i, 1);
+ if (hv_cfg_fd1 < 0) {
+ pr_err("PCI: Couldn't open config fd to HV "
+ "for controller %d\n", i);
+ goto err_cont;
+ }
+
+ sprintf(name, "pcie/%d/mem", i);
+ hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+ if (hv_mem_fd < 0) {
+ pr_err("PCI: Could not open mem fd to HV!\n");
+ goto err_cont;
+ }
+
+ pr_info("PCI: Found PCI controller #%d\n", i);
+
+ controller = &controllers[num_controllers];
+
+ if (tile_init_irqs(i, controller)) {
+ pr_err("PCI: Could not initialize "
+ "IRQs, aborting.\n");
+ goto err_cont;
+ }
+
+ controller->index = num_controllers;
+ controller->hv_cfg_fd[0] = hv_cfg_fd0;
+ controller->hv_cfg_fd[1] = hv_cfg_fd1;
+ controller->hv_mem_fd = hv_mem_fd;
+ controller->first_busno = 0;
+ controller->last_busno = 0xff;
+ controller->ops = &tile_cfg_ops;
+
+ num_controllers++;
+ continue;
+
+err_cont:
+ if (hv_cfg_fd0 >= 0)
+ hv_dev_close(hv_cfg_fd0);
+ if (hv_cfg_fd1 >= 0)
+ hv_dev_close(hv_cfg_fd1);
+ if (hv_mem_fd >= 0)
+ hv_dev_close(hv_mem_fd);
+ continue;
+ }
+
+ /*
+ * Before using the PCIe, see if we need to do any platform-specific
+ * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
+ */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_controller *controller = &controllers[i];
+
+ if (controller->plx_gen1)
+ tile_plx_gen1 = 1;
+ }
+
+ return num_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pci_controller *controller =
+ (struct pci_controller *)dev->sysdata;
+ return (pin - 1) + controller->irq_base;
+}
+
+
+static void __init fixup_read_and_payload_sizes(void)
+{
+ struct pci_dev *dev = NULL;
+ int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
+ int max_read_size = 0x2; /* Limit to 512 byte reads. */
+ u16 new_values;
+
+ /* Scan for the smallest maximum payload size. */
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ int pcie_caps_offset;
+ u32 devcap;
+ int max_payload;
+
+ pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pcie_caps_offset == 0)
+ continue;
+
+ pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
+ &devcap);
+ max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
+ if (max_payload < smallest_max_payload)
+ smallest_max_payload = max_payload;
+ }
+
+ /* Now, set the max_payload_size for all devices to that value. */
+ new_values = (max_read_size << 12) | (smallest_max_payload << 5);
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ int pcie_caps_offset;
+ u16 devctl;
+
+ pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pcie_caps_offset == 0)
+ continue;
+
+ pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+ &devctl);
+ devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
+ devctl |= new_values;
+ pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+ devctl);
+ }
+}
+
+
+/*
+ * Second PCI initialization entry point, called by subsys_initcall.
+ *
+ * The controllers have been set up by the time we get here, by a call to
+ * tile_pci_init.
+ */
+static int __init pcibios_init(void)
+{
+ int i;
+
+ pr_info("PCI: Probing PCI hardware\n");
+
+ /*
+ * Delay a bit in case devices aren't ready. Some devices are
+ * known to require at least 20ms here, but we use a more
+ * conservative value.
+ */
+ mdelay(250);
+
+ /* Scan all of the recorded PCI controllers. */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_controller *controller = &controllers[i];
+ struct pci_bus *bus;
+
+ pr_info("PCI: initializing controller #%d\n", i);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It reads the PCI tree for this bus into the Linux
+ * data structures.
+ *
+ * This is inlined in linux/pci.h and calls into
+ * pci_scan_bus_parented() in probe.c.
+ */
+ bus = pci_scan_bus(0, controller->ops, controller);
+ controller->root_bus = bus;
+ controller->last_busno = bus->subordinate;
+
+ }
+
+ /* Do machine dependent PCI interrupt routing */
+ pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It allocates all of the resources (I/O memory, etc)
+ * associated with the devices read in above.
+ */
+
+ pci_assign_unassigned_resources();
+
+ /* Configure the max_read_size and max_payload_size values. */
+ fixup_read_and_payload_sizes();
+
+ /* Record the I/O resources in the PCI controller structure. */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_bus *root_bus = controllers[i].root_bus;
+ struct pci_bus *next_bus;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &root_bus->devices, bus_list) {
+ /* Find the PCI host controller, ie. the 1st bridge. */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+ (PCI_SLOT(dev->devfn) == 0)) {
+ next_bus = dev->subordinate;
+ controllers[i].mem_resources[0] =
+ *next_bus->resource[0];
+ controllers[i].mem_resources[1] =
+ *next_bus->resource[1];
+ controllers[i].mem_resources[2] =
+ *next_bus->resource[2];
+
+ break;
+ }
+ }
+
+ }
+
+ return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * No bus fixups needed.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ /* Nothing needs to be done. */
+}
+
+/*
+ * This can be called from the generic PCI layer, but doesn't need to
+ * do anything.
+ */
+char __devinit *pcibios_setup(char *str)
+{
+ /* Nothing needs to be done. */
+ return str;
+}
+
+/*
+ * This is called from the generic Linux layer.
+ */
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * Enable memory and/or address decoding, as appropriate, for the
+ * device described by the 'dev' struct.
+ *
+ * This is called from the generic PCI layer, and can be called
+ * for bridges or endpoints.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ u8 header_type;
+ int i;
+ struct resource *r;
+
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * For bridges, we enable both memory and I/O decoding
+ * in call cases.
+ */
+ cmd |= PCI_COMMAND_IO;
+ cmd |= PCI_COMMAND_MEMORY;
+ } else {
+ /*
+ * For endpoints, we enable memory and/or I/O decoding
+ * only if they have a memory resource of that type.
+ */
+ for (i = 0; i < 6; i++) {
+ r = &dev->resource[i];
+ if (r->flags & IORESOURCE_UNSET) {
+ pr_err("PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ }
+
+ /*
+ * We only write the command if it changed.
+ */
+ if (cmd != old_cmd)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ return 0;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len)
+ return NULL;
+ if (max && len > max)
+ len = max;
+
+ if (!(flags & IORESOURCE_MEM)) {
+ pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
+ start = 0;
+ }
+
+ return (void __iomem *)start;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI slot & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & slot.
+ */
+
+static int __devinit tile_cfg_read(struct pci_bus *bus,
+ unsigned int devfn,
+ int offset,
+ int size,
+ u32 *val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ int busnum = bus->number & 0xff;
+ int slot = (devfn >> 3) & 0x1f;
+ int function = devfn & 0x7;
+ u32 addr;
+ int config_mode = 1;
+
+ /*
+ * There is no bridge between the Tile and bus 0, so we
+ * use config0 to talk to bus 0.
+ *
+ * If we're talking to a bus other than zero then we
+ * must have found a bridge.
+ */
+ if (busnum == 0) {
+ /*
+ * We fake an empty slot for (busnum == 0) && (slot > 0),
+ * since there is only one slot on bus 0.
+ */
+ if (slot) {
+ *val = 0xFFFFFFFF;
+ return 0;
+ }
+ config_mode = 0;
+ }
+
+ addr = busnum << 20; /* Bus in 27:20 */
+ addr |= slot << 15; /* Slot (device) in 19:15 */
+ addr |= function << 12; /* Function is in 14:12 */
+ addr |= (offset & 0xFFF); /* byte address in 0:11 */
+
+ return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
+ (HV_VirtAddr)(val), size, addr);
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int __devinit tile_cfg_write(struct pci_bus *bus,
+ unsigned int devfn,
+ int offset,
+ int size,
+ u32 val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ int busnum = bus->number & 0xff;
+ int slot = (devfn >> 3) & 0x1f;
+ int function = devfn & 0x7;
+ u32 addr;
+ int config_mode = 1;
+ HV_VirtAddr valp = (HV_VirtAddr)&val;
+
+ /*
+ * For bus 0 slot 0 we use config 0 accesses.
+ */
+ if (busnum == 0) {
+ /*
+ * We fake an empty slot for (busnum == 0) && (slot > 0),
+ * since there is only one slot on bus 0.
+ */
+ if (slot)
+ return 0;
+ config_mode = 0;
+ }
+
+ addr = busnum << 20; /* Bus in 27:20 */
+ addr |= slot << 15; /* Slot (device) in 19:15 */
+ addr |= function << 12; /* Function is in 14:12 */
+ addr |= (offset & 0xFFF); /* byte address in 0:11 */
+
+#ifdef __BIG_ENDIAN
+ /* Point to the correct part of the 32-bit "val". */
+ valp += 4 - size;
+#endif
+
+ return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
+ valp, size, addr);
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+ .read = tile_cfg_read,
+ .write = tile_cfg_write,
+};
+
+
+/*
+ * In the following, each PCI controller's mem_resources[1]
+ * represents its (non-prefetchable) PCI memory resource.
+ * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
+ * prefetchable PCI memory resources, respectively.
+ * For more details, see pci_setup_bridge() in setup-bus.c.
+ * By comparing the target PCI memory address against the
+ * end address of controller 0, we can determine the controller
+ * that should accept the PCI memory access.
+ */
+#define TILE_READ(size, type) \
+type _tile_read##size(unsigned long addr) \
+{ \
+ type val; \
+ int idx = 0; \
+ if (addr > controllers[0].mem_resources[1].end && \
+ addr > controllers[0].mem_resources[2].end) \
+ idx = 1; \
+ if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \
+ (HV_VirtAddr)(&val), sizeof(type), addr)) \
+ pr_err("PCI: read %zd bytes at 0x%lX failed\n", \
+ sizeof(type), addr); \
+ return val; \
+} \
+EXPORT_SYMBOL(_tile_read##size)
+
+TILE_READ(b, u8);
+TILE_READ(w, u16);
+TILE_READ(l, u32);
+TILE_READ(q, u64);
+
+#define TILE_WRITE(size, type) \
+void _tile_write##size(type val, unsigned long addr) \
+{ \
+ int idx = 0; \
+ if (addr > controllers[0].mem_resources[1].end && \
+ addr > controllers[0].mem_resources[2].end) \
+ idx = 1; \
+ if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \
+ (HV_VirtAddr)(&val), sizeof(type), addr)) \
+ pr_err("PCI: write %zd bytes at 0x%lX failed\n", \
+ sizeof(type), addr); \
+} \
+EXPORT_SYMBOL(_tile_write##size)
+
+TILE_WRITE(b, u8);
+TILE_WRITE(w, u16);
+TILE_WRITE(l, u32);
+TILE_WRITE(q, u64);
childregs->regs[0] = 0; /* return value is zero */
childregs->sp = sp; /* override with new user stack pointer */
+ /*
+ * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
+ * which is passed in as arg #5 to sys_clone().
+ */
+ if (clone_flags & CLONE_SETTLS)
+ childregs->tp = regs->regs[4];
+
/*
* Copy the callee-saved registers from the passed pt_regs struct
* into the context-switch callee-saved registers area.
return __switch_to(prev, next, next_current_ksp0(next));
}
+/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
void __user *, parent_tidptr, void __user *, child_tidptr,
struct pt_regs *, regs)
for_each_online_node(i)
register_one_node(i);
- for_each_present_cpu(i)
+ for (i = 0; i < smp_height * smp_width; ++i)
register_cpu(&cpu_devices[i], i);
return 0;
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
*/
int restore_sigcontext(struct pt_regs *regs,
- struct sigcontext __user *sc, long *pr0)
+ struct sigcontext __user *sc)
{
int err = 0;
int i;
regs->faultnum = INT_SWINT_1_SIGRETURN;
- err |= __get_user(*pr0, &sc->gregs[0]);
return err;
}
-/* sigreturn() returns long since it restores r0 in the interrupted code. */
+/* The assembly shim for this function arranges to ignore the return value. */
SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
-#include <linux/smp_lock.h>
#include <linux/bootmem.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
void *memchr(const void *s, int c, size_t n)
{
+ const uint32_t *last_word_ptr;
+ const uint32_t *p;
+ const char *last_byte_ptr;
+ uintptr_t s_int;
+ uint32_t goal, before_mask, v, bits;
+ char *ret;
+
+ if (__builtin_expect(n == 0, 0)) {
+ /* Don't dereference any memory if the array is empty. */
+ return NULL;
+ }
+
/* Get an aligned pointer. */
- const uintptr_t s_int = (uintptr_t) s;
- const uint32_t *p = (const uint32_t *)(s_int & -4);
+ s_int = (uintptr_t) s;
+ p = (const uint32_t *)(s_int & -4);
/* Create four copies of the byte for which we are looking. */
- const uint32_t goal = 0x01010101 * (uint8_t) c;
+ goal = 0x01010101 * (uint8_t) c;
/* Read the first word, but munge it so that bytes before the array
* will not match goal.
* Note that this shift count expression works because we know
* shift counts are taken mod 32.
*/
- const uint32_t before_mask = (1 << (s_int << 3)) - 1;
- uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+ before_mask = (1 << (s_int << 3)) - 1;
+ v = (*p | before_mask) ^ (goal & before_mask);
/* Compute the address of the last byte. */
- const char *const last_byte_ptr = (const char *)s + n - 1;
+ last_byte_ptr = (const char *)s + n - 1;
/* Compute the address of the word containing the last byte. */
- const uint32_t *const last_word_ptr =
- (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
-
- uint32_t bits;
- char *ret;
-
- if (__builtin_expect(n == 0, 0)) {
- /* Don't dereference any memory if the array is empty. */
- return NULL;
- }
+ last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
while ((bits = __insn_seqb(v, goal)) == 0) {
if (__builtin_expect(p == last_word_ptr, 0)) {
* when we compare them.
*/
u32 my_ticket_;
+ u32 iterations = 0;
- /* Take out the next ticket; this will also stop would-be readers. */
- if (val & 1)
- val = get_rwlock(rwlock);
- rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+ /*
+ * Wait until there are no readers, then bump up the next
+ * field and capture the ticket value.
+ */
+ for (;;) {
+ if (!(val & 1)) {
+ if ((val >> RD_COUNT_SHIFT) == 0)
+ break;
+ rwlock->lock = val;
+ }
+ delay_backoff(iterations++);
+ val = __insn_tns((int *)&rwlock->lock);
+ }
- /* Extract my ticket value from the original word. */
+ /* Take out the next ticket and extract my ticket value. */
+ rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
my_ticket_ = val >> WR_NEXT_SHIFT;
- /*
- * Wait until the "current" field matches our ticket, and
- * there are no remaining readers.
- */
+ /* Wait until the "current" field matches our ticket. */
for (;;) {
u32 curr_ = val >> WR_CURR_SHIFT;
- u32 readers = val >> RD_COUNT_SHIFT;
- u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+ u32 delta = ((my_ticket_ - curr_) & WR_MASK);
if (likely(delta == 0))
break;
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sysctl.h>
static void free_winch(struct winch *winch, int free_irq_ok)
{
+ if (free_irq_ok)
+ free_irq(WINCH_IRQ, winch);
+
list_del(&winch->list);
if (winch->pid != -1)
os_close_file(winch->fd);
if (winch->stack != 0)
free_stack(winch->stack, 0);
- if (free_irq_ok)
- free_irq(WINCH_IRQ, winch);
kfree(winch);
}
#include "linux/stddef.h"
#include "linux/fs.h"
-#include "linux/smp_lock.h"
#include "linux/ptrace.h"
#include "linux/sched.h"
#include "linux/slab.h"
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
- select HAVE_PERF_EVENTS if (!M386 && !M486)
+ select HAVE_PERF_EVENTS
select HAVE_IRQ_WORK
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
+ if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
error("Destination address too large");
#endif
#ifndef CONFIG_RELOCATABLE
* by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/syscalls.h>
#include <linux/times.h>
#include <linux/utsname.h>
-#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/uio.h>
#include <linux/poll.h>
#define BIOS_BEGIN 0x000a0000
#define BIOS_END 0x00100000
+#define BIOS_ROM_BASE 0xffe00000
+#define BIOS_ROM_END 0xffffffff
+
#ifdef __KERNEL__
/* see comment in arch/x86/kernel/e820.c */
extern struct e820map e820;
}
/* Return an pointer with offset calculated */
-static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx,
- phys_addr_t phys, pgprot_t flags)
+static __always_inline unsigned long
+__set_fixmap_offset(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
__set_fixmap(idx, phys, flags);
return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1));
#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
#define KVM_MIN_FREE_MMU_PAGES 5
#define KVM_REFILL_PAGES 25
-#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_MAX_CPUID_ENTRIES 80
#define KVM_NR_FIXED_MTRR_REGION 88
#define KVM_NR_VAR_MTRR 8
#define FAM10H_MMIO_CONF_ENABLE (1<<0)
#define FAM10H_MMIO_CONF_BUSRANGE_MASK 0xf
#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffff
+#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffffULL
#define FAM10H_MMIO_CONF_BASE_SHIFT 20
#define MSR_FAM10H_NODE_ID 0xc001100c
#define __PV_IS_CALLEE_SAVE(func) \
((struct paravirt_callee_save) { func })
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
{
return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
}
-static inline void arch_local_irq_restore(unsigned long f)
+static inline notrace void arch_local_irq_restore(unsigned long f)
{
PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
}
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
{
PVOP_VCALLEE0(pv_irq_ops.irq_disable);
}
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
{
PVOP_VCALLEE0(pv_irq_ops.irq_enable);
}
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
{
unsigned long f;
void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
struct pvclock_vcpu_time_info *vcpu,
struct timespec *ts);
+void pvclock_resume(void);
/*
* Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
#define UVH_APICID 0x002D0E00L
#define UV_APIC_PNODE_SHIFT 6
+#define UV_APICID_HIBIT_MASK 0xffff0000
+
/* Local Bus from cpu's perspective */
#define LOCAL_BUS_BASE 0x1c00000
#define LOCAL_BUS_SIZE (4 * 1024 * 1024)
}
}
+extern unsigned int uv_apicid_hibits;
static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode)
{
+ apicid |= uv_apicid_hibits;
return (1UL << UVH_IPI_INT_SEND_SHFT) |
((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
(mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
*
* SGI UV MMR definitions
*
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_X86_UV_UV_MMRS_H
} s;
};
+/* ========================================================================= */
+/* UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK */
+/* ========================================================================= */
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0
+
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
+
+union uvh_lb_target_physical_apic_id_mask_u {
+ unsigned long v;
+ struct uvh_lb_target_physical_apic_id_mask_s {
+ unsigned long bit_enables : 32; /* RW */
+ unsigned long rsvd_32_63 : 32; /* */
+ } s;
+};
+
/* ========================================================================= */
/* UVH_NODE_ID */
/* ========================================================================= */
#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
#endif
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>__MACH2PHYS_SHIFT)
/* Maximum number of virtual CPUs in multi-processor guests. */
#define MAX_VIRT_CPUS 32
/* And the trap vector is... */
#define TRAP_INSTR "int $0x82"
+#define __MACH2PHYS_VIRT_START 0xF5800000
+#define __MACH2PHYS_VIRT_END 0xF6800000
+
+#define __MACH2PHYS_SHIFT 2
+
/*
* Virtual addresses beyond this are not modifiable by guest OSes. The
* machine->physical mapping table starts at this address, read-only.
#define __HYPERVISOR_VIRT_END 0xFFFF880000000000
#define __MACH2PHYS_VIRT_START 0xFFFF800000000000
#define __MACH2PHYS_VIRT_END 0xFFFF804000000000
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#define HYPERVISOR_VIRT_END mk_unsigned_long(__HYPERVISOR_VIRT_END)
-#endif
-
-#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START)
-#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END)
-#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define __MACH2PHYS_SHIFT 3
/*
* int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/pfn.h>
+#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#define MAX_DOMAIN_PAGES \
((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
+extern unsigned long *machine_to_phys_mapping;
+extern unsigned int machine_to_phys_order;
extern unsigned long get_phys_to_machine(unsigned long pfn);
extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn);
if (xen_feature(XENFEAT_auto_translated_physmap))
return mfn;
-#if 0
if (unlikely((mfn >> machine_to_phys_order) != 0))
- return max_mapnr;
-#endif
+ return ~0;
pfn = 0;
/*
obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o
obj-y += tsc.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
+obj-y += resource.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
+
+ /*
+ * Now that local APIC setup is completed for BP, configure the fault
+ * handling for interrupt remapping.
+ */
+ if (!smp_processor_id() && intr_remapping_enabled)
+ enable_drhd_fault_handling();
+
}
#ifdef CONFIG_X86_X2APIC
#include <linux/nmi.h>
#include <linux/module.h>
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
u64 hw_nmi_get_sample_period(void)
{
return (u64)(cpu_khz) * 1000 * 60;
}
#ifdef ARCH_HAS_NMI_WATCHDOG
+
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
void arch_trigger_all_cpu_backtrace(void)
{
int i;
{
struct irq_cfg *cfg = data->chip_data;
int i, do_unmask_irq = 0, irq = data->irq;
- struct irq_desc *desc = irq_to_desc(irq);
unsigned long v;
irq_complete_move(cfg);
#ifdef CONFIG_GENERIC_PENDING_IRQ
/* If we are moving the irq we need to mask it */
- if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+ if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
do_unmask_irq = 1;
mask_ioapic(cfg);
}
msg.data |= MSI_DATA_VECTOR(cfg->vector);
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+ msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
dmar_msi_write(irq, &msg);
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
}
-
- /*
- * Now that apic routing model is selected, configure the
- * fault handling for intr remapping.
- */
- if (intr_remapping_enabled)
- enable_drhd_fault_handling();
}
/* Same for both flat and physical. */
static union uvh_apicid uvh_apicid;
int uv_min_hub_revision_id;
EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
static DEFINE_SPINLOCK(uv_nmi_lock);
static inline bool is_GRU_range(u64 start, u64 end)
uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
}
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB. This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+ union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+ unsigned long *mmr;
+
+ mmr = early_ioremap(UV_LOCAL_MMR_BASE |
+ UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr));
+ apicid_mask.v = *mmr;
+ early_iounmap(mmr, sizeof(*mmr));
+ uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
int nodeid;
__get_cpu_var(x2apic_extra_bits) =
nodeid << (uvh_apicid.s.pnode_shift - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
+ uv_set_apicid_hibit();
return 1;
}
}
int pnode;
pnode = uv_apicid_to_pnode(phys_apicid);
+ phys_apicid |= uv_apicid_hibits;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
int cpu = cpumask_first(cpumask);
if ((unsigned)cpu < nr_cpu_ids)
- return per_cpu(x86_cpu_to_apicid, cpu);
+ return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
else
return BAD_APICID;
}
if (cpumask_test_cpu(cpu, cpu_online_mask))
break;
}
- return per_cpu(x86_cpu_to_apicid, cpu);
+ return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
}
static unsigned int x2apic_get_apic_id(unsigned long x)
#endif
+static bool check_hw_exists(void)
+{
+ u64 val, val_new = 0;
+ int ret = 0;
+
+ val = 0xabcdUL;
+ ret |= checking_wrmsrl(x86_pmu.perfctr, val);
+ ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new);
+ if (ret || val != val_new)
+ return false;
+
+ return true;
+}
+
static void reserve_ds_buffers(void);
static void release_ds_buffers(void);
pmu_check_apic();
+ /* sanity check that the hardware exists or is emulated */
+ if (!check_hw_exists()) {
+ pr_cont("Broken PMU hardware detected, software events only.\n");
+ return;
+ }
+
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.quirks)
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/device.h>
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
- pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp)
+ pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp)
CFI_REL_OFFSET eip, 0
pushl_cfi %eax
.endm
/* save partial stack frame */
+ .pushsection .kprobes.text, "ax"
ENTRY(save_args)
XCPT_FRAME
cld
ret
CFI_ENDPROC
END(save_args)
+ .popsection
ENTRY(save_rest)
PARTIAL_FRAME 1 REST_SKIP+8
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+
/* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
- PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
/*
* Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
*/
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
RESERVE_BRK(pagetables, INIT_MAP_SIZE)
__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
-initial_pg_pmd:
+ENTRY(initial_pg_pmd)
.fill 1024*KPMDS,4,0
#else
ENTRY(initial_page_table)
.fill 1024,4,0
#endif
-initial_pg_fixmap:
+ENTRY(initial_pg_fixmap)
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
#define HPET_DEV_FSB_CAP 0x1000
#define HPET_DEV_PERI_CAP 0x2000
+#define HPET_MIN_CYCLES 128
+#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
/*
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- /* 5 usec minimum reprogramming delta. */
- hpet_clockevent.min_delta_ns = 5000;
+ /* Setup minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+ &hpet_clockevent);
/*
* Start hpet with the boot cpu mask and make it
* the wraparound into account) nor a simple count down event
* mode. Further the write to the comparator register is
* delayed internally up to two HPET clock cycles in certain
- * chipsets (ATI, ICH9,10). We worked around that by reading
- * back the compare register, but that required another
- * workaround for ICH9,10 chips where the first readout after
- * write can return the old stale value. We already have a
- * minimum delta of 5us enforced, but a NMI or SMI hitting
+ * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+ * longer delays. We worked around that by reading back the
+ * compare register, but that required another workaround for
+ * ICH9,10 chips where the first readout after write can
+ * return the old stale value. We already had a minimum
+ * programming delta of 5us enforced, but a NMI or SMI hitting
* between the counter readout and the comparator write can
* move us behind that point easily. Now instead of reading
* the compare register back several times, we make the ETIME
* decision based on the following: Return ETIME if the
- * counter value after the write is less than 8 HPET cycles
+ * counter value after the write is less than HPET_MIN_CYCLES
* away from the event or if the counter is already ahead of
- * the event.
+ * the event. The minimum programming delta for the generic
+ * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
*/
res = (s32)(cnt - hpet_readl(HPET_COUNTER));
- return res < 8 ? -ETIME : 0;
+ return res < HPET_MIN_CYCLES ? -ETIME : 0;
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
dr6_p = (unsigned long *)ERR_PTR(args->err);
dr6 = *dr6_p;
+ /* If it's a single step, TRAP bits are random */
+ if (dr6 & DR_STEP)
+ return NOTIFY_DONE;
+
/* Do an early return if no trap bits are set in DR6 */
if ((dr6 & DR_TRAP_BITS) == 0)
return NOTIFY_DONE;
if (!breakinfo[i].enabled)
continue;
bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
- if (bp->attr.disabled == 1)
+ if (!bp->attr.disabled) {
+ arch_uninstall_hw_breakpoint(bp);
+ bp->attr.disabled = 1;
continue;
+ }
if (dbg_is_early)
early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
breakinfo[i].type);
- else
- arch_uninstall_hw_breakpoint(bp);
- bp->attr.disabled = 1;
+ else if (hw_break_release_slot(i))
+ printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
+ breakinfo[i].addr);
+ breakinfo[i].enabled = 0;
}
}
/* For performance reasons, reuse mc area when possible */
if (!mc || mc_size > curr_mc_size) {
- if (mc)
- vfree(mc);
+ vfree(mc);
mc = vmalloc(mc_size);
if (!mc)
break;
if (get_ucode_data(mc, ucode_ptr, mc_size) ||
microcode_sanity_check(mc) < 0) {
- vfree(mc);
break;
}
if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
- if (new_mc)
- vfree(new_mc);
+ vfree(new_mc);
new_rev = mc_header.rev;
new_mc = mc;
mc = NULL; /* trigger new vmalloc */
leftover -= mc_size;
}
- if (mc)
- vfree(mc);
+ vfree(mc);
if (leftover) {
- if (new_mc)
- vfree(new_mc);
+ vfree(new_mc);
state = UCODE_ERROR;
goto out;
}
goto out;
}
- if (uci->mc)
- vfree(uci->mc);
+ vfree(uci->mc);
uci->mc = (struct microcode_intel *)new_mc;
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
};
static u64 __cpuinitdata fam10h_pci_mmconf_base;
-static int __cpuinitdata fam10h_pci_mmconf_base_status;
static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
return start1 - start2;
}
-/*[47:0] */
-/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
+#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
+#define MMCONF_MASK (~(MMCONF_UNIT - 1))
+#define MMCONF_SIZE (MMCONF_UNIT << 8)
+/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
-#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
+#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
static void __cpuinit get_fam10h_pci_mmconf_base(void)
{
int i;
struct range range[8];
/* only try to get setting from BSP */
- /* -1 or 1 */
- if (fam10h_pci_mmconf_base_status)
+ if (fam10h_pci_mmconf_base)
return;
if (!early_pci_allowed())
- goto fail;
+ return;
found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
}
if (!found)
- goto fail;
+ return;
/* SYS_CFG */
address = MSR_K8_SYSCFG;
/* TOP_MEM2 is not enabled? */
if (!(val & (1<<21))) {
- tom2 = 0;
+ tom2 = 1ULL << 32;
} else {
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
- tom2 = val & (0xffffULL<<32);
+ tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
}
if (base <= tom2)
- base = tom2 + (1ULL<<32);
+ base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
/*
* need to check if the range is in the high mmio range that is
if (!(reg & 3))
continue;
- start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+ start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
- end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+ end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
- if (!end)
+ if (end < tom2)
continue;
range[hi_mmio_num].start = start;
if (range[hi_mmio_num - 1].end < base)
goto out;
- if (range[0].start > base)
+ if (range[0].start > base + MMCONF_SIZE)
goto out;
/* need to find one window */
- base = range[0].start - (1ULL << 32);
+ base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
if ((base > tom2) && BASE_VALID(base))
goto out;
- base = range[hi_mmio_num - 1].end + (1ULL << 32);
- if ((base > tom2) && BASE_VALID(base))
+ base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+ if (BASE_VALID(base))
goto out;
/* need to find window between ranges */
- if (hi_mmio_num > 1)
- for (i = 0; i < hi_mmio_num - 1; i++) {
- if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
- base = range[i].end + (1ULL << 32);
- if ((base > tom2) && BASE_VALID(base))
- goto out;
- }
+ for (i = 1; i < hi_mmio_num; i++) {
+ base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+ val = range[i].start & MMCONF_MASK;
+ if (val >= base + MMCONF_SIZE && BASE_VALID(base))
+ goto out;
}
-
-fail:
- fam10h_pci_mmconf_base_status = -1;
return;
+
out:
fam10h_pci_mmconf_base = base;
- fam10h_pci_mmconf_base_status = 1;
}
void __cpuinit fam10h_check_enable_mmcfg(void)
/* only trust the one handle 256 buses, if acpi=off */
if (!acpi_pci_disabled || busnbits >= 8) {
- u64 base;
- base = val & (0xffffULL << 32);
- if (fam10h_pci_mmconf_base_status <= 0) {
+ u64 base = val & MMCONF_MASK;
+
+ if (!fam10h_pci_mmconf_base) {
fam10h_pci_mmconf_base = base;
- fam10h_pci_mmconf_base_status = 1;
return;
} else if (fam10h_pci_mmconf_base == base)
return;
* with 256 buses
*/
get_fam10h_pci_mmconf_base();
- if (fam10h_pci_mmconf_base_status <= 0)
+ if (!fam10h_pci_mmconf_base) {
+ pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
return;
+ }
printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/device.h>
static atomic64_t last_value = ATOMIC64_INIT(0);
+void pvclock_resume(void)
+{
+ atomic64_set(&last_value, 0);
+}
+
cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
{
struct pvclock_shadow_time shadow;
--- /dev/null
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+ resource_size_t end)
+{
+ resource_size_t low = 0, high = 0;
+
+ if (res->end < start || res->start > end)
+ return; /* no conflict */
+
+ if (res->start < start)
+ low = start - res->start;
+
+ if (res->end > end)
+ high = res->end - end;
+
+ /* Keep the area above or below the conflict, whichever is larger */
+ if (low > high)
+ res->end = start - 1;
+ else
+ res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+ int i;
+ struct e820entry *entry;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ entry = &e820.map[i];
+
+ resource_clip(avail, entry->addr,
+ entry->addr + entry->size - 1);
+ }
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+ /* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+ if (avail->flags & IORESOURCE_MEM) {
+ if (avail->start < BIOS_END)
+ avail->start = BIOS_END;
+ resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+ remove_e820_regions(avail);
+ }
+}
return total << PAGE_SHIFT;
}
-#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF
+/*
+ * Keep the crash kernel below this limit. On 32 bits earlier kernels
+ * would limit the kernel to the low 512 MiB due to mapping restrictions.
+ * On 64 bits, kexec-tools currently limits us to 896 MiB; increase this
+ * limit once kexec-tools are fixed.
+ */
+#ifdef CONFIG_X86_32
+# define CRASH_KERNEL_ADDR_MAX (512 << 20)
+#else
+# define CRASH_KERNEL_ADDR_MAX (896 << 20)
+#endif
+
static void __init reserve_crashkernel(void)
{
unsigned long long total_mem;
const unsigned long long alignment = 16<<20; /* 16M */
/*
- * kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX
+ * kexec want bzImage is below CRASH_KERNEL_ADDR_MAX
*/
crash_base = memblock_find_in_range(alignment,
- DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment);
+ CRASH_KERNEL_ADDR_MAX, crash_size, alignment);
if (crash_base == MEMBLOCK_ERROR) {
pr_info("crashkernel reservation failed - No suitable area found.\n");
x86_init.oem.arch_setup();
- resource_alloc_from_bottom = 0;
iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
setup_memory_map();
parse_setup_data();
* Setup init_xstate_buf to represent the init state of
* all the features managed by the xsave
*/
- init_xstate_buf = alloc_bootmem(xstate_size);
+ init_xstate_buf = alloc_bootmem_align(xstate_size,
+ __alignof__(struct xsave_struct));
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
clts();
s->pics[1].elcr_mask = 0xde;
s->pics[0].pics_state = s;
s->pics[1].pics_state = s;
+ s->pics[0].isr_ack = 0xff;
+ s->pics[1].isr_ack = 0xff;
/*
* Initialize PIO device
ASSERT(!VALID_PAGE(root));
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_free_some_pages(vcpu);
- sp = kvm_mmu_get_page(vcpu, i << 30, i << 30,
+ sp = kvm_mmu_get_page(vcpu, i << (30 - PAGE_SHIFT),
+ i << 30,
PT32_ROOT_LEVEL, 1, ACC_ALL,
NULL);
root = __pa(sp->spt);
vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
load_host_msrs(vcpu);
+ kvm_load_ldt(ldt_selector);
loadsegment(fs, fs_selector);
#ifdef CONFIG_X86_64
load_gs_index(gs_selector);
#else
loadsegment(gs, gs_selector);
#endif
- kvm_load_ldt(ldt_selector);
reload_tss(vcpu);
static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
{
switch (func) {
+ case 0x00000001:
+ /* Mask out xsave bit as long as it is not supported by SVM */
+ entry->ecx &= ~(bit(X86_FEATURE_XSAVE));
+ break;
case 0x80000001:
if (nested)
entry->ecx |= (1 << 2); /* Set SVM bit */
#endif
#ifdef CONFIG_X86_64
- if (is_long_mode(&vmx->vcpu)) {
- rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+ rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+ if (is_long_mode(&vmx->vcpu))
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
- }
#endif
for (i = 0; i < vmx->save_nmsrs; ++i)
kvm_set_shared_msr(vmx->guest_msrs[i].index,
++vmx->vcpu.stat.host_state_reload;
vmx->host_state.loaded = 0;
- if (vmx->host_state.fs_reload_needed)
- loadsegment(fs, vmx->host_state.fs_sel);
+#ifdef CONFIG_X86_64
+ if (is_long_mode(&vmx->vcpu))
+ rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+#endif
if (vmx->host_state.gs_ldt_reload_needed) {
kvm_load_ldt(vmx->host_state.ldt_sel);
#ifdef CONFIG_X86_64
load_gs_index(vmx->host_state.gs_sel);
- wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
#else
loadsegment(gs, vmx->host_state.gs_sel);
#endif
}
+ if (vmx->host_state.fs_reload_needed)
+ loadsegment(fs, vmx->host_state.fs_sel);
reload_tss();
#ifdef CONFIG_X86_64
- if (is_long_mode(&vmx->vcpu)) {
- rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
- wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
- }
+ wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
if (current_thread_info()->status & TS_USEDFPU)
clts();
return PT_PDPE_LEVEL;
}
-static inline u32 bit(int bitno)
-{
- return 1 << (bitno & 31);
-}
-
static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
u64 __read_mostly host_xcr0;
-static inline u32 bit(int bitno)
-{
- return 1 << (bitno & 31);
-}
-
static void kvm_on_user_return(struct user_return_notifier *urn)
{
unsigned slot;
#ifdef CONFIG_CPU_FREQ
struct cpufreq_policy policy;
memset(&policy, 0, sizeof(policy));
- cpufreq_get_policy(&policy, get_cpu());
+ cpu = get_cpu();
+ cpufreq_get_policy(&policy, cpu);
if (policy.cpuinfo.max_freq)
max_tsc_khz = policy.cpuinfo.max_freq;
+ put_cpu();
#endif
cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
+ if (sregs->cr4 & X86_CR4_OSXSAVE)
+ update_cpuid(vcpu);
if (!is_long_mode(vcpu) && is_pae(vcpu)) {
load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3);
mmu_reset_needed = 1;
return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
}
+static inline u32 bit(int bitno)
+{
+ return 1 << (bitno & 31);
+}
+
void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq);
{
lguest_data.pgdir = cr3;
lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
- cr3_changed = true;
+
+ /* These two page tables are simple, linear, and used during boot */
+ if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table))
+ cr3_changed = true;
}
static unsigned long lguest_read_cr3(void)
* to forget all of them. Fortunately, this is very rare.
*
* ... except in early boot when the kernel sets up the initial pagetables,
- * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
- * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds.
+ * which makes booting astonishingly slow: 48 seconds! So we don't even tell
+ * the Host anything changed until we've done the first real page table switch,
+ * which brings boot back to 4.3 seconds.
*/
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
clockevents_register_device(&lguest_clockevent);
/* Finally, we unblock the timer interrupt. */
- enable_lguest_irq(0);
+ clear_bit(0, lguest_data.blocked_interrupts);
}
/*
*/
switch_to_new_gdt(0);
- /* We actually boot with all memory mapped, but let's say 128MB. */
- max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
-
/*
* The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
/*G:020
* Our story starts with the kernel booting into startup_32 in
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
+ call init_pagetables
+
/* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
+/*
+ * Initialize page tables. This creates a PDE and a set of page
+ * tables, which are located immediately beyond __brk_base. The variable
+ * _brk_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end.
+ *
+ * FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they
+ * don't have a stack at this point, so we can't just use call and ret.
+ */
+init_pagetables:
+#if PTRS_PER_PMD > 1
+#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
+#else
+#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
+#endif
+#define pa(X) ((X) - __PAGE_OFFSET)
+
+/* Enough space to fit pagetables for the low memory linear map */
+MAPPING_BEYOND_END = \
+ PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+#ifdef CONFIG_X86_PAE
+
+ /*
+ * In PAE mode initial_page_table is statically defined to contain
+ * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3
+ * entries). The identity mapping is handled by pointing two PGD entries
+ * to the first kernel PMD.
+ *
+ * Note the upper half of each PMD or PTE are always zero at this stage.
+ */
+
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
+
+ xorl %ebx,%ebx /* %ebx is kept at zero */
+
+ movl $pa(__brk_base), %edi
+ movl $pa(initial_pg_pmd), %edx
+ movl $PTE_IDENT_ATTR, %eax
+10:
+ leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */
+ movl %ecx,(%edx) /* Store PMD entry */
+ /* Upper half already zero */
+ addl $8,%edx
+ movl $512,%ecx
+11:
+ stosl
+ xchgl %eax,%ebx
+ stosl
+ xchgl %eax,%ebx
+ addl $0x1000,%eax
+ loop 11b
+
+ /*
+ * End condition: we must map up to the end + MAPPING_BEYOND_END.
+ */
+ movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+ cmpl %ebp,%eax
+ jb 10b
+1:
+ addl $__PAGE_OFFSET, %edi
+ movl %edi, pa(_brk_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+ movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
+#else /* Not PAE */
+
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $pa(__brk_base), %edi
+ movl $pa(initial_page_table), %edx
+ movl $PTE_IDENT_ATTR, %eax
+10:
+ leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */
+ movl %ecx,(%edx) /* Store identity PDE entry */
+ movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
+ addl $4,%edx
+ movl $1024, %ecx
+11:
+ stosl
+ addl $0x1000,%eax
+ loop 11b
+ /*
+ * End condition: we must map up to the end + MAPPING_BEYOND_END.
+ */
+ movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+ cmpl %ebp,%eax
+ jb 10b
+ addl $__PAGE_OFFSET, %edi
+ movl %edi, pa(_brk_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+ movl %eax,pa(initial_page_table+0xffc)
+#endif
+ ret
+
/*G:055
* We create a macro which puts the assembler code between lgstart_ and lgend_
* markers. These templates are put in the .text section: they can't be
static void __cpuinit calculate_tlb_offset(void)
{
- int cpu, node, nr_node_vecs;
+ int cpu, node, nr_node_vecs, idx = 0;
/*
* we are changing tlb_vector_offset for each CPU in runtime, but this
* will not cause inconsistency, as the write is atomic under X86. we
nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes;
for_each_online_node(node) {
- int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) *
+ int node_offset = (idx % NUM_INVALIDATE_TLB_VECTORS) *
nr_node_vecs;
int cpu_offset = 0;
for_each_cpu(cpu, cpumask_of_node(node)) {
cpu_offset++;
cpu_offset = cpu_offset % nr_node_vecs;
}
+ idx++;
}
}
return 0;
}
-/* initialize the APIC for the IBS interrupts if available */
+/*
+ * check and reserve APIC extended interrupt LVT offset for IBS if
+ * available
+ *
+ * init_ibs() preforms implicitly cpu-local operations, so pin this
+ * thread to its current CPU
+ */
+
static void init_ibs(void)
{
- ibs_caps = get_ibs_caps();
+ preempt_disable();
+ ibs_caps = get_ibs_caps();
if (!ibs_caps)
- return;
+ goto out;
- if (__init_ibs_nmi()) {
+ if (__init_ibs_nmi() < 0)
ibs_caps = 0;
- return;
- }
+ else
+ printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps);
- printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n",
- (unsigned)ibs_caps);
+out:
+ preempt_enable();
}
static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
- struct resource *root, *conflict;
u64 start, end;
status = resource_to_addr(acpi_res, &addr);
return AE_OK;
if (addr.resource_type == ACPI_MEMORY_RANGE) {
- root = &iomem_resource;
flags = IORESOURCE_MEM;
if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
flags |= IORESOURCE_PREFETCH;
} else if (addr.resource_type == ACPI_IO_RANGE) {
- root = &ioport_resource;
flags = IORESOURCE_IO;
} else
return AE_OK;
return AE_OK;
}
- conflict = insert_resource_conflict(root, res);
- if (conflict) {
- dev_err(&info->bridge->dev,
- "address space collision: host bridge window %pR "
- "conflicts with %s %pR\n",
- res, conflict->name, conflict);
- } else {
- pci_bus_add_resource(info->bus, res, 0);
- info->res_num++;
- if (addr.translation_offset)
- dev_info(&info->bridge->dev, "host bridge window %pR "
- "(PCI address [%#llx-%#llx])\n",
- res, res->start - addr.translation_offset,
- res->end - addr.translation_offset);
+ info->res_num++;
+ if (addr.translation_offset)
+ dev_info(&info->bridge->dev, "host bridge window %pR "
+ "(PCI address [%#llx-%#llx])\n",
+ res, res->start - addr.translation_offset,
+ res->end - addr.translation_offset);
+ else
+ dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
+ return AE_OK;
+}
+
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+ if (res->start <= point && point <= res->end)
+ return true;
+ return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+ int i, j;
+ struct resource *res1, *res2;
+
+ for (i = 0; i < info->res_num; i++) {
+ res1 = &info->res[i];
+ if (!(res1->flags & type))
+ continue;
+
+ for (j = i + 1; j < info->res_num; j++) {
+ res2 = &info->res[j];
+ if (!(res2->flags & type))
+ continue;
+
+ /*
+ * I don't like throwing away windows because then
+ * our resources no longer match the ACPI _CRS, but
+ * the kernel resource tree doesn't allow overlaps.
+ */
+ if (resource_contains(res1, res2->start) ||
+ resource_contains(res1, res2->end) ||
+ resource_contains(res2, res1->start) ||
+ resource_contains(res2, res1->end)) {
+ res1->start = min(res1->start, res2->start);
+ res1->end = max(res1->end, res2->end);
+ dev_info(&info->bridge->dev,
+ "host bridge window expanded to %pR; %pR ignored\n",
+ res1, res2);
+ res2->flags = 0;
+ }
+ }
+ }
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+ int i;
+ struct resource *res, *root, *conflict;
+
+ if (!pci_use_crs)
+ return;
+
+ coalesce_windows(info, IORESOURCE_MEM);
+ coalesce_windows(info, IORESOURCE_IO);
+
+ for (i = 0; i < info->res_num; i++) {
+ res = &info->res[i];
+
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+ else if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
else
- dev_info(&info->bridge->dev,
- "host bridge window %pR\n", res);
+ continue;
+
+ conflict = insert_resource_conflict(root, res);
+ if (conflict)
+ dev_err(&info->bridge->dev,
+ "address space collision: host bridge window %pR "
+ "conflicts with %s %pR\n",
+ res, conflict->name, conflict);
+ else
+ pci_bus_add_resource(info->bus, res, 0);
}
- return AE_OK;
}
static void
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
+ add_resources(&info);
return;
name_alloc_fail:
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
- resource_size_t start = round_down(res->end - size + 1, align);
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
-
- /*
- * If we're avoiding ISA aliases, the largest contiguous I/O
- * port space is 256 bytes. Clearing bits 9 and 10 preserves
- * all 256-byte and smaller alignments, so the result will
- * still be correctly aligned.
- */
- if (!skip_isa_ioresource_align(dev))
- start &= ~0x300;
- } else if (res->flags & IORESOURCE_MEM) {
- if (start < BIOS_END)
- start = res->end; /* fail; no space */
+ if (skip_isa_ioresource_align(dev))
+ return start;
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
}
return start;
}
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
+#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
+ MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
+
static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
struct msi_msg *msg)
{
MSI_ADDR_REDIRECTION_CPU |
MSI_ADDR_DEST_ID(pirq);
- msg->data =
- MSI_DATA_TRIGGER_EDGE |
- MSI_DATA_LEVEL_ASSERT |
- /* delivery mode reserved */
- (3 << 8) |
- MSI_DATA_VECTOR(0);
+ msg->data = XEN_PIRQ_MSI_DATA;
}
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
struct msi_msg msg;
list_for_each_entry(msidesc, &dev->msi_list, list) {
+ __read_msi_msg(msidesc, &msg);
+ pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
+ ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
+ if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) {
+ xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
+ "msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ);
+ if (irq < 0)
+ goto error;
+ ret = set_irq_msi(irq, msidesc);
+ if (ret < 0)
+ goto error_while;
+ printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d"
+ " pirq=%d\n", irq, pirq);
+ return 0;
+ }
xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi", &irq, &pirq);
+ "msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ));
if (irq < 0 || pirq < 0)
goto error;
printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq);
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = uvhub_to_first_apicid(uvhub);
+ apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
((apicid << 32) | vector));
}
apicid = cpu_physical_id(cpu);
pnode = uv_apicid_to_pnode(apicid);
+ apicid |= uv_apicid_hibits;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(apicid << UVH_IPI_INT_APIC_ID_SHFT) |
(X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
static int uv_setup_intr(int cpu, u64 expires)
{
u64 val;
+ unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
int pnode = uv_cpu_to_pnode(cpu);
uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
UVH_EVENT_OCCURRED0_RTC1_MASK);
val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
- ((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
+ ((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
/* Set configuration */
uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val);
export CPPFLAGS_vdso.lds += -P -C
-VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \
+VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
vdso32-images = $(vdso32.so-y:%=vdso32-%.so)
CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
-VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1
+VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
# This makes sure the $(obj) subdirectory exists even though vdso32/
# is not a kbuild sub-make subdirectory.
enum xen_domain_type xen_domain_type = XEN_NATIVE;
EXPORT_SYMBOL_GPL(xen_domain_type);
+unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
+EXPORT_SYMBOL(machine_to_phys_mapping);
+unsigned int machine_to_phys_order;
+EXPORT_SYMBOL(machine_to_phys_order);
+
struct start_info *xen_start_info;
EXPORT_SYMBOL_GPL(xen_start_info);
{
struct sched_shutdown r = { .reason = reason };
-#ifdef CONFIG_SMP
- stop_other_cpus();
-#endif
-
if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
BUG();
}
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
+ struct physdev_set_iopl set_iopl;
+ int rc;
pgd_t *pgd;
if (!xen_start_info)
xen_domain_type = XEN_PV_DOMAIN;
+ xen_setup_machphys_mapping();
+
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
/* Allocate and initialize top and mid mfn levels for p2m structure */
xen_build_mfn_list_list();
- init_mm.pgd = pgd;
-
/* keep using Xen gdt for now; no urgent need to change it */
#ifdef CONFIG_X86_32
#else
pv_info.kernel_rpl = 0;
#endif
-
/* set the limit of our address space */
xen_reserve_top();
+ /* We used to do this in xen_arch_setup, but that is too late on AMD
+ * were early_cpu_init (run before ->arch_setup()) calls early_amd_init
+ * which pokes 0xcf8 port.
+ */
+ set_iopl.iopl = 1;
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+ if (rc != 0)
+ xen_raw_printk("physdev_op failed %d\n", rc);
+
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
set_page_prot(pmd, PAGE_KERNEL_RO);
}
+void __init xen_setup_machphys_mapping(void)
+{
+ struct xen_machphys_mapping mapping;
+ unsigned long machine_to_phys_nr_ents;
+
+ if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) {
+ machine_to_phys_mapping = (unsigned long *)mapping.v_start;
+ machine_to_phys_nr_ents = mapping.max_mfn + 1;
+ } else {
+ machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES;
+ }
+ machine_to_phys_order = fls(machine_to_phys_nr_ents - 1);
+}
+
#ifdef CONFIG_X86_64
static void convert_pfn_mfn(void *v)
{
return pgd;
}
#else /* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
+
+static __init void xen_write_cr3_init(unsigned long cr3)
+{
+ unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
+
+ BUG_ON(read_cr3() != __pa(initial_page_table));
+ BUG_ON(cr3 != __pa(swapper_pg_dir));
+
+ /*
+ * We are switching to swapper_pg_dir for the first time (from
+ * initial_page_table) and therefore need to mark that page
+ * read-only and then pin it.
+ *
+ * Xen disallows sharing of kernel PMDs for PAE
+ * guests. Therefore we must copy the kernel PMD from
+ * initial_page_table into a new kernel PMD to be used in
+ * swapper_pg_dir.
+ */
+ swapper_kernel_pmd =
+ extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+ memcpy(swapper_kernel_pmd, initial_kernel_pmd,
+ sizeof(pmd_t) * PTRS_PER_PMD);
+ swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
+ __pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
+ set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
+
+ set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+ xen_write_cr3(cr3);
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn);
+
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
+ PFN_DOWN(__pa(initial_page_table)));
+ set_page_prot(initial_page_table, PAGE_KERNEL);
+ set_page_prot(initial_kernel_pmd, PAGE_KERNEL);
+
+ pv_mmu_ops.write_cr3 = &xen_write_cr3;
+}
__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
unsigned long max_pfn)
{
pmd_t *kernel_pmd;
- level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+ initial_kernel_pmd =
+ extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
xen_start_info->nr_pt_frames * PAGE_SIZE +
512*1024);
kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
- memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+ memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
- xen_map_identity_early(level2_kernel_pgt, max_pfn);
+ xen_map_identity_early(initial_kernel_pmd, max_pfn);
- memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
- set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
- __pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+ memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+ initial_page_table[KERNEL_PGD_BOUNDARY] =
+ __pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
- set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
- set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+ set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO);
+ set_page_prot(initial_page_table, PAGE_KERNEL_RO);
set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
- xen_write_cr3(__pa(swapper_pg_dir));
-
- pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE,
+ PFN_DOWN(__pa(initial_page_table)));
+ xen_write_cr3(__pa(initial_page_table));
memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
__pa(xen_start_info->pt_base +
xen_start_info->nr_pt_frames * PAGE_SIZE),
"XEN PAGETABLES");
- return swapper_pg_dir;
+ return initial_page_table;
}
#endif /* CONFIG_X86_64 */
.write_cr2 = xen_write_cr2,
.read_cr3 = xen_read_cr3,
+#ifdef CONFIG_X86_32
+ .write_cr3 = xen_write_cr3_init,
+#else
.write_cr3 = xen_write_cr3,
+#endif
.flush_tlb_user = xen_flush_tlb,
.flush_tlb_kernel = xen_flush_tlb,
x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
pv_mmu_ops = xen_mmu_ops;
- vmap_lazy_unmap = false;
-
memset(dummy_mapping, 0xff, PAGE_SIZE);
}
prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP);
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) ==
+ (VM_PFNMAP | VM_RESERVED | VM_IO)));
rmd.mfn = mfn;
rmd.prot = prot;
return 0;
}
-void __init xen_unplug_emulated_devices(void)
+void xen_unplug_emulated_devices(void)
{
int r;
#include <xen/interface/callback.h>
#include <xen/interface/memory.h>
#include <xen/interface/physdev.h>
-#include <xen/interface/memory.h>
#include <xen/features.h>
#include "xen-ops.h"
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end = map[i].addr + map[i].size;
- if (map[i].type == E820_RAM) {
- if (map[i].addr < mem_end && end > mem_end) {
- /* Truncate region to max_mem. */
- u64 delta = end - mem_end;
+ if (map[i].type == E820_RAM && end > mem_end) {
+ /* RAM off the end - may be partially included */
+ u64 delta = min(map[i].size, end - mem_end);
- map[i].size -= delta;
- extra_pages += PFN_DOWN(delta);
+ map[i].size -= delta;
+ end -= delta;
- end = mem_end;
- }
+ extra_pages += PFN_DOWN(delta);
}
- if (end > xen_extra_mem_start)
+ if (map[i].size > 0 && end > xen_extra_mem_start)
xen_extra_mem_start = end;
- /* If region is non-RAM or below mem_end, add what remains */
- if ((map[i].type != E820_RAM || map[i].addr < mem_end) &&
- map[i].size > 0)
+ /* Add region if any remains */
+ if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
else
extra_pages = 0;
- if (!xen_initial_domain())
- xen_add_extra_mem(extra_pages);
+ xen_add_extra_mem(extra_pages);
return "Xen";
}
-static void xen_idle(void)
-{
- local_irq_disable();
-
- if (need_resched())
- local_irq_enable();
- else {
- current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
- }
-}
-
/*
* Set the bit indicating "nosegneg" library variants should be used.
* We only need to bother in pure 32-bit mode; compat 32-bit processes
void __init xen_arch_setup(void)
{
- struct physdev_set_iopl set_iopl;
- int rc;
-
xen_panic_handler_init();
HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
xen_enable_sysenter();
xen_enable_syscall();
- set_iopl.iopl = 1;
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
- if (rc != 0)
- printk(KERN_INFO "physdev_op failed %d\n", rc);
-
#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
- pm_idle = xen_idle;
+ /* Set up idle, making sure it calls safe_halt() pvop */
+#ifdef CONFIG_X86_32
+ boot_cpu_data.hlt_works_ok = 1;
+#endif
+ pm_idle = default_idle;
fiddle_vdso();
}
int cpu;
xen_hvm_init_shared_info();
xen_callback_vector();
+ xen_unplug_emulated_devices();
if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
for_each_online_cpu(cpu) {
xen_setup_runstate_info(cpu);
{
int cpu;
+ pvclock_resume();
+
if (xen_clockevent != &xen_vcpuop_clockevent)
return;
void xen_callback_vector(void);
void xen_hvm_init_shared_info(void);
-void __init xen_unplug_emulated_devices(void);
+void xen_unplug_emulated_devices(void);
void __init xen_build_dynamic_phys_to_machine(void);
for (i = 0; i < iov_count; i++) {
unsigned long uaddr = (unsigned long)iov[i].iov_base;
+ if (!iov[i].iov_len)
+ return -EINVAL;
+
if (uaddr & queue_dma_alignment(q)) {
unaligned = 1;
break;
}
- if (!iov[i].iov_len)
- return -EINVAL;
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
return 0;
fbio = bio;
- cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+ cluster = blk_queue_cluster(q);
seg_size = 0;
nr_phys_segs = 0;
for_each_bio(bio) {
static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio,
struct bio *nxt)
{
- if (!test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+ if (!blk_queue_cluster(q))
return 0;
if (bio->bi_seg_back_size + nxt->bi_seg_front_size >
int nsegs, cluster;
nsegs = 0;
- cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+ cluster = blk_queue_cluster(q);
/*
* for each bio in rq
lim->alignment_offset = 0;
lim->io_opt = 0;
lim->misaligned = 0;
- lim->no_cluster = 0;
+ lim->cluster = 1;
}
EXPORT_SYMBOL(blk_set_default_limits);
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q: the request queue for the device
+ * blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
+ * @limits: the queue limits
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
* per-device basis in /sys/block/<device>/queue/max_sectors_kb.
* The soft limit can not exceed max_hw_sectors.
**/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
{
if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
__func__, max_hw_sectors);
}
- q->limits.max_hw_sectors = max_hw_sectors;
- q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
- BLK_DEF_MAX_SECTORS);
+ limits->max_hw_sectors = max_hw_sectors;
+ limits->max_sectors = min_t(unsigned int, max_hw_sectors,
+ BLK_DEF_MAX_SECTORS);
+}
+EXPORT_SYMBOL(blk_limits_max_hw_sectors);
+
+/**
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
+ * @q: the request queue for the device
+ * @max_hw_sectors: max hardware sectors in the usual 512b unit
+ *
+ * Description:
+ * See description for blk_limits_max_hw_sectors().
+ **/
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+{
+ blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
{
blk_stack_limits(&t->limits, &b->limits, 0);
-
- if (!t->queue_lock)
- WARN_ON_ONCE(1);
- else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
- unsigned long flags;
- spin_lock_irqsave(t->queue_lock, flags);
- queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
- spin_unlock_irqrestore(t->queue_lock, flags);
- }
}
EXPORT_SYMBOL(blk_queue_stack_limits);
t->io_min = max(t->io_min, b->io_min);
t->io_opt = lcm(t->io_opt, b->io_opt);
- t->no_cluster |= b->no_cluster;
+ t->cluster &= b->cluster;
t->discard_zeroes_data &= b->discard_zeroes_data;
/* Physical block size a multiple of the logical block size? */
sector_t offset)
{
struct request_queue *t = disk->queue;
- struct request_queue *b = bdev_get_queue(bdev);
if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
top, bottom);
}
-
- if (!t->queue_lock)
- WARN_ON_ONCE(1);
- else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
- unsigned long flags;
-
- spin_lock_irqsave(t->queue_lock, flags);
- if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
- queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
- spin_unlock_irqrestore(t->queue_lock, flags);
- }
}
EXPORT_SYMBOL(disk_stack_limits);
static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
{
- if (test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+ if (blk_queue_cluster(q))
return queue_var_show(queue_max_segment_size(q), (page));
return queue_var_show(PAGE_CACHE_SIZE, (page));
tg->slice_end[rw], jiffies);
}
+static inline void throtl_set_slice_end(struct throtl_data *td,
+ struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
+{
+ tg->slice_end[rw] = roundup(jiffy_end, throtl_slice);
+}
+
static inline void throtl_extend_slice(struct throtl_data *td,
struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
{
if (throtl_slice_used(td, tg, rw))
return;
+ /*
+ * A bio has been dispatched. Also adjust slice_end. It might happen
+ * that initially cgroup limit was very low resulting in high
+ * slice_end, but later limit was bumped up and bio was dispached
+ * sooner, then we need to reduce slice_end. A high bogus slice_end
+ * is bad because it does not allow new slice to start.
+ */
+
+ throtl_set_slice_end(td, tg, rw, jiffies + throtl_slice);
+
time_elapsed = jiffies - tg->slice_start[rw];
nr_slices = time_elapsed / throtl_slice;
{
unsigned int nr_reads = 0, nr_writes = 0;
unsigned int max_nr_reads = throtl_grp_quantum*3/4;
- unsigned int max_nr_writes = throtl_grp_quantum - nr_reads;
+ unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads;
struct bio *bio;
/* Try to dispatch 75% READS and 25% WRITES */
struct throtl_grp *tg;
struct hlist_node *pos, *n;
- /*
- * Make sure atomic_inc() effects from
- * throtl_update_blkio_group_read_bps(), group of functions are
- * visible.
- * Is this required or smp_mb__after_atomic_inc() was suffcient
- * after the atomic_inc().
- */
- smp_rmb();
if (!atomic_read(&td->limits_changed))
return;
throtl_log(td, "limit changed =%d", atomic_read(&td->limits_changed));
- hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
- /*
- * Do I need an smp_rmb() here to make sure tg->limits_changed
- * update is visible. I am relying on smp_rmb() at the
- * beginning of function and not putting a new one here.
- */
+ /*
+ * Make sure updates from throtl_update_blkio_group_read_bps() group
+ * of functions to tg->limits_changed are visible. We do not
+ * want update td->limits_changed to be visible but update to
+ * tg->limits_changed not being visible yet on this cpu. Hence
+ * the read barrier.
+ */
+ smp_rmb();
+ hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
if (throtl_tg_on_rr(tg) && tg->limits_changed) {
throtl_log_tg(td, tg, "limit change rbps=%llu wbps=%llu"
" riops=%u wiops=%u", tg->bps[READ],
int ret, rw;
unsigned int dxfer_len;
void *dxferp = NULL;
+ struct bsg_class_device *bcd = &q->bsg_dev;
+
+ /* if the LLD has been removed then the bsg_unregister_queue will
+ * eventually be called and the class_dev was freed, so we can no
+ * longer use this request_queue. Return no such address.
+ */
+ if (!bcd->class_dev)
+ return ERR_PTR(-ENXIO);
dprintk("map hdr %llx/%u %llx/%u\n", (unsigned long long) hdr->dout_xferp,
hdr->dout_xfer_len, (unsigned long long) hdr->din_xferp,
#include <linux/hdreg.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/hdreg.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
#include <linux/blktrace_api.h>
#include <asm/uaccess.h>
.release = single_release,
};
#endif
-static int get_ac_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct acpi_ac *ac = to_acpi_ac(psy);
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = ac->state;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-static enum power_supply_property ac_props[] = {
- POWER_SUPPLY_PROP_ONLINE,
-};
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
return 0;
}
+/* --------------------------------------------------------------------------
+ sysfs I/F
+ -------------------------------------------------------------------------- */
+static int get_ac_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct acpi_ac *ac = to_acpi_ac(psy);
+
+ if (!ac)
+ return -ENODEV;
+
+ if (acpi_ac_get_state(ac))
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ac->state;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
#ifdef CONFIG_ACPI_PROCFS_POWER
/* --------------------------------------------------------------------------
FS Interface (/proc)
return_ACPI_STATUS(AE_OK);
}
+ /* Disable the GPE in case it's been enabled already. */
+ (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+
/*
* Add the GPE information from above to the gpe_event_info block for
* use during dispatch of this GPE.
* It is used to provide exclusive accessing for ERST Error Log
* Address Range too.
*/
-static DEFINE_SPINLOCK(erst_lock);
+static DEFINE_RAW_SPINLOCK(erst_lock);
static inline int erst_errno(int command_status)
{
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
count = __erst_get_record_count();
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return count;
}
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
rc = __erst_get_next_record_id(record_id);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
return -EINVAL;
if (erst_erange.attr & ERST_RANGE_NVRAM) {
- if (!spin_trylock_irqsave(&erst_lock, flags))
+ if (!raw_spin_trylock_irqsave(&erst_lock, flags))
return -EBUSY;
rc = __erst_write_to_nvram(record);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
if (record->record_length > erst_erange.size)
return -EINVAL;
- if (!spin_trylock_irqsave(&erst_lock, flags))
+ if (!raw_spin_trylock_irqsave(&erst_lock, flags))
return -EBUSY;
memcpy(erst_erange.vaddr, record, record->record_length);
rcd_erange = erst_erange.vaddr;
memcpy(&rcd_erange->persistence_information, "ER", 2);
rc = __erst_write_to_storage(0);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
len = __erst_read(record_id, record, buflen);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return len;
}
EXPORT_SYMBOL_GPL(erst_read);
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
rc = __erst_get_next_record_id(&record_id);
if (rc) {
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
/* no more record */
if (record_id == APEI_ERST_INVALID_RECORD_ID) {
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return 0;
}
len = __erst_read(record_id, record, buflen);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return len;
}
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
if (erst_erange.attr & ERST_RANGE_NVRAM)
rc = __erst_clear_from_nvram(record_id);
else
rc = __erst_clear_from_storage(record_id);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
/* HEST table parsing */
-static struct acpi_table_hest *hest_tab;
+static struct acpi_table_hest *__read_mostly hest_tab;
-static int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
+static const int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
[ACPI_HEST_TYPE_IA32_CHECK] = -1, /* need further calculation */
[ACPI_HEST_TYPE_IA32_CORRECTED_CHECK] = -1,
[ACPI_HEST_TYPE_IA32_NMI] = sizeof(struct acpi_hest_ia_nmi),
unsigned int count;
};
-static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
{
int *count = data;
return 0;
}
-static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
{
struct platform_device *ghes_dev;
struct ghes_arr *ghes_arr = data;
return rc;
}
-static int hest_ghes_dev_register(unsigned int ghes_count)
+static int __init hest_ghes_dev_register(unsigned int ghes_count)
{
int rc, i;
struct ghes_arr ghes_arr;
ec_flag_msi, "MSI hardware", {
DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star")}, NULL},
{
+ ec_flag_msi, "MSI hardware", {
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR")}, NULL},
+ {
ec_validate_ecdt, "ASUS hardware", {
DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
{},
static LIST_HEAD(acpi_ioremaps);
static DEFINE_SPINLOCK(acpi_ioremap_lock);
-#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
-static char osi_setup_string[OSI_STRING_LENGTH_MAX];
-
static void __init acpi_osi_setup_late(void);
/*
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
- unsigned int known:1;
-} osi_linux = { 0, 0, 0, 0};
+} osi_linux = {0, 0, 0};
static u32 acpi_osi_handler(acpi_string interface, u32 supported)
{
__setup("acpi_os_name=", acpi_os_name_setup);
+#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
+#define OSI_STRING_ENTRIES_MAX 16 /* arbitrary */
+
+struct osi_setup_entry {
+ char string[OSI_STRING_LENGTH_MAX];
+ bool enable;
+};
+
+static struct osi_setup_entry __initdata osi_setup_entries[OSI_STRING_ENTRIES_MAX];
+
+void __init acpi_osi_setup(char *str)
+{
+ struct osi_setup_entry *osi;
+ bool enable = true;
+ int i;
+
+ if (!acpi_gbl_create_osi_method)
+ return;
+
+ if (str == NULL || *str == '\0') {
+ printk(KERN_INFO PREFIX "_OSI method disabled\n");
+ acpi_gbl_create_osi_method = FALSE;
+ return;
+ }
+
+ if (*str == '!') {
+ str++;
+ enable = false;
+ }
+
+ for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+ osi = &osi_setup_entries[i];
+ if (!strcmp(osi->string, str)) {
+ osi->enable = enable;
+ break;
+ } else if (osi->string[0] == '\0') {
+ osi->enable = enable;
+ strncpy(osi->string, str, OSI_STRING_LENGTH_MAX);
+ break;
+ }
+ }
+}
+
static void __init set_osi_linux(unsigned int enable)
{
- if (osi_linux.enable != enable) {
+ if (osi_linux.enable != enable)
osi_linux.enable = enable;
- printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
- enable ? "Add": "Delet");
- }
if (osi_linux.enable)
acpi_osi_setup("Linux");
static void __init acpi_cmdline_osi_linux(unsigned int enable)
{
- osi_linux.cmdline = 1; /* cmdline set the default */
+ osi_linux.cmdline = 1; /* cmdline set the default and override DMI */
+ osi_linux.dmi = 0;
set_osi_linux(enable);
return;
void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
{
- osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
-
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
if (enable == -1)
return;
- osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */
-
+ osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
set_osi_linux(enable);
return;
*/
static void __init acpi_osi_setup_late(void)
{
- char *str = osi_setup_string;
+ struct osi_setup_entry *osi;
+ char *str;
+ int i;
+ acpi_status status;
- if (*str == '\0')
- return;
+ for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+ osi = &osi_setup_entries[i];
+ str = osi->string;
- if (!strcmp("!Linux", str)) {
- acpi_cmdline_osi_linux(0); /* !enable */
- } else if (*str == '!') {
- if (acpi_remove_interface(++str) == AE_OK)
- printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
- } else if (!strcmp("Linux", str)) {
- acpi_cmdline_osi_linux(1); /* enable */
- } else {
- if (acpi_install_interface(str) == AE_OK)
- printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ if (*str == '\0')
+ break;
+ if (osi->enable) {
+ status = acpi_install_interface(str);
+
+ if (ACPI_SUCCESS(status))
+ printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ } else {
+ status = acpi_remove_interface(str);
+
+ if (ACPI_SUCCESS(status))
+ printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
+ }
}
}
-int __init acpi_osi_setup(char *str)
+static int __init osi_setup(char *str)
{
- if (str == NULL || *str == '\0') {
- printk(KERN_INFO PREFIX "_OSI method disabled\n");
- acpi_gbl_create_osi_method = FALSE;
- } else {
- strncpy(osi_setup_string, str, OSI_STRING_LENGTH_MAX);
- }
+ if (str && !strcmp("Linux", str))
+ acpi_cmdline_osi_linux(1);
+ else if (str && !strcmp("!Linux", str))
+ acpi_cmdline_osi_linux(0);
+ else
+ acpi_osi_setup(str);
return 1;
}
-__setup("acpi_osi=", acpi_osi_setup);
+__setup("acpi_osi=", osi_setup);
/* enable serialization to combat AE_ALREADY_EXISTS errors */
static int __init acpi_serialize_setup(char *str)
return AE_OK;
}
-acpi_status acpi_os_initialize1(void)
+acpi_status __init acpi_os_initialize1(void)
{
kacpid_wq = create_workqueue("kacpid");
kacpi_notify_wq = create_workqueue("kacpi_notify");
resource->name));
} else {
result = __acpi_power_on(resource);
+ if (result)
+ resource->ref_count--;
}
mutex_unlock(&resource->resource_lock);
- return 0;
+ return result;
}
static int acpi_power_off_device(acpi_handle handle)
struct acpi_handle_list *tl = NULL; /* Target Resources */
int i = 0;
-
if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
return -EINVAL;
+ if (device->power.state == state)
+ return 0;
+
if ((device->power.state < ACPI_STATE_D0)
|| (device->power.state > ACPI_STATE_D3))
return -ENODEV;
goto end;
}
- if (device->power.state == state) {
- goto end;
- }
-
/*
* Then we dereference all power resources used in the current list.
*/
return 0;
}
-static int acpi_thermal_cpufreq_increase(unsigned int cpu)
-{
- return -ENODEV;
-}
-static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
-{
- return -ENODEV;
-}
-
#endif
int acpi_processor_get_limit_info(struct acpi_processor *pr)
}
static acpi_status
-acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device,
- union acpi_object *package)
+acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
+ struct acpi_device_wakeup *wakeup)
{
- int i = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *package = NULL;
union acpi_object *element = NULL;
+ acpi_status status;
+ int i = 0;
- if (!device || !package || (package->package.count < 2))
+ if (!wakeup)
return AE_BAD_PARAMETER;
+ /* _PRW */
+ status = acpi_evaluate_object(handle, "_PRW", NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
+ return status;
+ }
+
+ package = (union acpi_object *)buffer.pointer;
+
+ if (!package || (package->package.count < 2)) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
+
element = &(package->package.elements[0]);
- if (!element)
- return AE_BAD_PARAMETER;
+ if (!element) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
if (element->type == ACPI_TYPE_PACKAGE) {
if ((element->package.count < 2) ||
(element->package.elements[0].type !=
ACPI_TYPE_LOCAL_REFERENCE)
- || (element->package.elements[1].type != ACPI_TYPE_INTEGER))
- return AE_BAD_DATA;
- device->wakeup.gpe_device =
+ || (element->package.elements[1].type != ACPI_TYPE_INTEGER)) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
+ wakeup->gpe_device =
element->package.elements[0].reference.handle;
- device->wakeup.gpe_number =
+ wakeup->gpe_number =
(u32) element->package.elements[1].integer.value;
} else if (element->type == ACPI_TYPE_INTEGER) {
- device->wakeup.gpe_number = element->integer.value;
- } else
- return AE_BAD_DATA;
+ wakeup->gpe_device = NULL;
+ wakeup->gpe_number = element->integer.value;
+ } else {
+ status = AE_BAD_DATA;
+ goto out;
+ }
element = &(package->package.elements[1]);
if (element->type != ACPI_TYPE_INTEGER) {
- return AE_BAD_DATA;
+ status = AE_BAD_DATA;
+ goto out;
}
- device->wakeup.sleep_state = element->integer.value;
+ wakeup->sleep_state = element->integer.value;
if ((package->package.count - 2) > ACPI_MAX_HANDLES) {
- return AE_NO_MEMORY;
+ status = AE_NO_MEMORY;
+ goto out;
}
- device->wakeup.resources.count = package->package.count - 2;
- for (i = 0; i < device->wakeup.resources.count; i++) {
+ wakeup->resources.count = package->package.count - 2;
+ for (i = 0; i < wakeup->resources.count; i++) {
element = &(package->package.elements[i + 2]);
- if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
- return AE_BAD_DATA;
+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
- device->wakeup.resources.handles[i] = element->reference.handle;
+ wakeup->resources.handles[i] = element->reference.handle;
}
- acpi_gpe_can_wake(device->wakeup.gpe_device, device->wakeup.gpe_number);
+ acpi_gpe_can_wake(wakeup->gpe_device, wakeup->gpe_number);
- return AE_OK;
+ out:
+ kfree(buffer.pointer);
+
+ return status;
}
static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
{
acpi_status status = 0;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- union acpi_object *package = NULL;
int psw_error;
- /* _PRW */
- status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
- goto end;
- }
-
- package = (union acpi_object *)buffer.pointer;
- status = acpi_bus_extract_wakeup_device_power_package(device, package);
+ status = acpi_bus_extract_wakeup_device_power_package(device->handle,
+ &device->wakeup);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Extracting _PRW package"));
goto end;
}
- kfree(buffer.pointer);
-
device->wakeup.flags.valid = 1;
device->wakeup.prepare_count = 0;
acpi_bus_set_run_wake_flags(device);
struct acpi_bus_ops *ops = context;
int type;
unsigned long long sta;
+ struct acpi_device_wakeup wakeup;
struct acpi_device *device;
acpi_status status;
int result;
return AE_OK;
if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
- !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+ !(sta & ACPI_STA_DEVICE_FUNCTIONING)) {
+ acpi_bus_extract_wakeup_device_power_package(handle, &wakeup);
return AE_CTRL_DEPTH;
+ }
/*
* We may already have an acpi_device from a previous enumeration. If
static u8 sleep_states[ACPI_S_STATE_COUNT];
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
static void acpi_sleep_tts_switch(u32 acpi_state)
{
union acpi_object in_arg = { ACPI_TYPE_INTEGER };
}
#ifdef CONFIG_ACPI_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
* and to restore them during the subsequent resume. Windows does that also for
DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
},
},
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-NW130D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
If unsure, say N.
-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select PPC_BESTCOMM_ATA
- help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
-
- If unsure, say N.
-
config PATA_OCTEON_CF
tristate "OCTEON Boot Bus Compact Flash support"
depends on CPU_CAVIUM_OCTEON
config PATA_CS5536
tristate "CS5536 PATA support"
- depends on PCI && X86 && !X86_64
+ depends on PCI
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
If unsure, say N.
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select PPC_BESTCOMM_ATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
depends on PCI
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
obj-$(CONFIG_SATA_SX4) += sata_sx4.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
obj-$(CONFIG_PATA_MACIO) += pata_macio.o
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
+obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
{
struct ata_device *dev = qc->dev;
- if (ata_tag_internal(qc->tag))
- return;
-
if (ata_is_nodata(qc->tf.protocol))
return;
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
- if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- /* always fill result TF for failed qc */
+ /*
+ * Finish internal commands without any further processing
+ * and always with the result TF filled.
+ */
+ if (unlikely(ata_tag_internal(qc->tag))) {
fill_result_tf(qc);
+ __ata_qc_complete(qc);
+ return;
+ }
- if (!ata_tag_internal(qc->tag))
- ata_qc_schedule_eh(qc);
- else
- __ata_qc_complete(qc);
+ /*
+ * Non-internal qc has failed. Fill the result TF and
+ * summon EH.
+ */
+ if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
+ fill_result_tf(qc);
+ ata_qc_schedule_eh(qc);
return;
}
struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+ enum ata_lpm_policy old_policy = link->lpm_policy;
unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
unsigned int err_mask;
int rc;
goto fail;
}
+ /*
+ * Low level driver acked the transition. Issue DIPM command
+ * with the new policy set.
+ */
+ link->lpm_policy = policy;
+ if (ap && ap->slave_link)
+ ap->slave_link->lpm_policy = policy;
+
/* host config updated, enable DIPM if transitioning to MIN_POWER */
ata_for_each_dev(dev, link, ENABLED) {
if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
}
}
- link->lpm_policy = policy;
- if (ap && ap->slave_link)
- ap->slave_link->lpm_policy = policy;
return 0;
fail:
+ /* restore the old policy */
+ link->lpm_policy = old_policy;
+ if (ap && ap->slave_link)
+ ap->slave_link->lpm_policy = old_policy;
+
/* if no device or only one more chance is left, disable LPM */
if (!dev || ehc->tries[dev->devno] <= 2) {
ata_link_printk(link, KERN_WARNING,
/**
* ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
+ * @shost: SCSI host of command to be sent
* @cmd: SCSI command to be sent
- * @done: Completion function, called when command is complete
*
* In some cases, this function translates SCSI commands into
* ATA taskfiles, and queues the taskfiles to be sent to
* ATA and ATAPI devices appearing as SCSI devices.
*
* LOCKING:
- * Releases scsi-layer-held lock, and obtains host lock.
+ * ATA host lock
*
* RETURNS:
* Return value from __ata_scsi_queuecmd() if @cmd can be queued,
* 0 otherwise.
*/
-int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
{
struct ata_port *ap;
struct ata_device *dev;
struct scsi_device *scsidev = cmd->device;
- struct Scsi_Host *shost = scsidev->host;
int rc = 0;
+ unsigned long irq_flags;
ap = ata_shost_to_port(shost);
- spin_unlock(shost->host_lock);
- spin_lock(ap->lock);
+ spin_lock_irqsave(ap->lock, irq_flags);
ata_scsi_dump_cdb(ap, cmd);
dev = ata_scsi_find_dev(ap, scsidev);
if (likely(dev))
- rc = __ata_scsi_queuecmd(cmd, done, dev);
+ rc = __ata_scsi_queuecmd(cmd, cmd->scsi_done, dev);
else {
cmd->result = (DID_BAD_TARGET << 16);
- done(cmd);
+ cmd->scsi_done(cmd);
}
- spin_unlock(ap->lock);
- spin_lock(shost->host_lock);
+ spin_unlock_irqrestore(ap->lock, irq_flags);
+
return rc;
}
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
return ata_sff_idle_irq(ap);
break;
- case HSM_ST:
- case HSM_ST_LAST:
- break;
- default:
+ case HSM_ST_IDLE:
return ata_sff_idle_irq(ap);
+ default:
+ break;
}
/* check main status, clearing INTRQ if needed */
#include <linux/delay.h>
#include <linux/libata.h>
#include <scsi/scsi_host.h>
+
+#ifdef CONFIG_X86_32
#include <asm/msr.h>
+static int use_msr;
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+#else
+#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */
+#undef wrmsr
+#define rdmsr(x, y, z) do { } while (0)
+#define wrmsr(x, y, z) do { } while (0)
+#define use_msr 0
+#endif
#define DRV_NAME "pata_cs5536"
-#define DRV_VERSION "0.0.7"
+#define DRV_VERSION "0.0.8"
enum {
CFG = 0,
IDE_ETC_NODMA = 0x03,
};
-static int use_msr;
-
static const u32 msr_reg[4] = {
MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
};
static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
{
if (unlikely(use_msr)) {
- u32 dummy;
+ u32 dummy __maybe_unused;
rdmsr(msr_reg[reg], *val, dummy);
return 0;
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cs5536);
MODULE_VERSION(DRV_VERSION);
-module_param_named(msr, use_msr, int, 0644);
-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
module_init(cs5536_init);
module_exit(cs5536_exit);
return 0;
}
-static void svia_configure(struct pci_dev *pdev)
+static void svia_configure(struct pci_dev *pdev, int board_id)
{
u8 tmp8;
}
/*
- * vt6421 has problems talking to some drives. The following
+ * vt6420/1 has problems talking to some drives. The following
* is the fix from Joseph Chan <JosephChan@via.com.tw>.
*
* When host issues HOLD, device may send up to 20DW of data
*
* https://bugzilla.kernel.org/show_bug.cgi?id=15173
* http://article.gmane.org/gmane.linux.ide/46352
+ * http://thread.gmane.org/gmane.linux.kernel/1062139
*/
- if (pdev->device == 0x3249) {
+ if (board_id == vt6420 || board_id == vt6421) {
pci_read_config_byte(pdev, 0x52, &tmp8);
tmp8 |= 1 << 2;
pci_write_config_byte(pdev, 0x52, tmp8);
if (rc)
return rc;
- svia_configure(pdev);
+ svia_configure(pdev, board_id);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
err = -ENOMEM;
goto out;
}
- atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, NULL);
+ atm_dev = atm_dev_register(DEV_LABEL, NULL, &adummy_ops, -1, NULL);
if (!atm_dev) {
printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
err = -ENODEV;
goto out_reset;
}
- dev->atm_dev = atm_dev_register (DEV_LABEL, &amb_ops, -1, NULL);
+ dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1,
+ NULL);
if (!dev->atm_dev) {
PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
err = -EINVAL;
if (!dev_data)
return -ENOMEM;
- dev = atm_dev_register(DEV_LABEL,&atmtcp_v_dev_ops,itf,NULL);
+ dev = atm_dev_register(DEV_LABEL,NULL,&atmtcp_v_dev_ops,itf,NULL);
if (!dev) {
kfree(dev_data);
return itf == -1 ? -ENOMEM : -EBUSY;
atm_dev_put(dev);
return -EMEDIUMTYPE;
}
- if (PRIV(dev)->vcc) return -EBUSY;
+ if (PRIV(dev)->vcc) {
+ atm_dev_put(dev);
+ return -EBUSY;
+ }
}
else {
int error;
&zeroes);
if (!cpu_zeroes) goto out1;
}
- dev = atm_dev_register(DEV_LABEL,&ops,-1,NULL);
+ dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
if (!dev) goto out2;
pci_set_drvdata(pci_dev, dev);
eni_dev->pci_dev = pci_dev;
fs_dev, sizeof (struct fs_dev));
if (!fs_dev)
goto err_out;
- atm_dev = atm_dev_register("fs", &ops, -1, NULL);
+ atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
if (!atm_dev)
goto err_out_free_fs_dev;
static int __devinit
-fore200e_register(struct fore200e* fore200e)
+fore200e_register(struct fore200e* fore200e, struct device *parent)
{
struct atm_dev* atm_dev;
DPRINTK(2, "device %s being registered\n", fore200e->name);
- atm_dev = atm_dev_register(fore200e->bus->proc_name, &fore200e_ops, -1,
- NULL);
+ atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops,
+ -1, NULL);
if (atm_dev == NULL) {
printk(FORE200E "unable to register device %s\n", fore200e->name);
return -ENODEV;
static int __devinit
-fore200e_init(struct fore200e* fore200e)
+fore200e_init(struct fore200e* fore200e, struct device *parent)
{
- if (fore200e_register(fore200e) < 0)
+ if (fore200e_register(fore200e, parent) < 0)
return -ENODEV;
if (fore200e->bus->configure(fore200e) < 0)
sprintf(fore200e->name, "%s-%d", bus->model_name, index);
- err = fore200e_init(fore200e);
+ err = fore200e_init(fore200e, &op->dev);
if (err < 0) {
fore200e_shutdown(fore200e);
kfree(fore200e);
sprintf(fore200e->name, "%s-%d", bus->model_name, index);
- err = fore200e_init(fore200e);
+ err = fore200e_init(fore200e, &pci_dev->dev);
if (err < 0) {
fore200e_shutdown(fore200e);
goto out_free;
goto init_one_failure;
}
- atm_dev = atm_dev_register(DEV_LABEL, &he_ops, -1, NULL);
+ atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL);
if (!atm_dev) {
err = -ENODEV;
goto init_one_failure;
PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
iobase, irq, membase);
- dev->atm_dev = atm_dev_register(DEV_LABEL, &hrz_ops, -1, NULL);
+ dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1,
+ NULL);
if (!(dev->atm_dev)) {
PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
err = -EINVAL;
goto err_out_iounmap;
}
- dev = atm_dev_register("idt77252", &idt77252_ops, -1, NULL);
+ dev = atm_dev_register("idt77252", &pcidev->dev, &idt77252_ops, -1,
+ NULL);
if (!dev) {
printk("%s: can't register atm device\n", card->name);
err = -EIO;
ret = -ENODEV;
goto err_out_free_iadev;
}
- dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL);
if (!dev) {
ret = -ENOMEM;
goto err_out_disable_dev;
return -ENOMEM;
}
- atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
if (atmdev == NULL) {
printk(KERN_ERR DEV_LABEL
": couldn't register atm device!\n");
}
/* Register device */
- card->atmdev = atm_dev_register("nicstar", &atm_ops, -1, NULL);
+ card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
+ -1, NULL);
if (card->atmdev == NULL) {
printk("nicstar%d: can't register device.\n", i);
error = 17;
static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
static int list_vccs(int vci);
static void release_vccs(struct atm_dev *dev);
-static int atm_init(struct solos_card *);
+static int atm_init(struct solos_card *, struct device *);
static void atm_remove(struct solos_card *);
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
static void solos_bh(unsigned long);
if (db_firmware_upgrade)
flash_upgrade(card, 3);
- err = atm_init(card);
+ err = atm_init(card, &dev->dev);
if (err)
goto out_free_irq;
return err;
}
-static int atm_init(struct solos_card *card)
+static int atm_init(struct solos_card *card, struct device *parent)
{
int i;
skb_queue_head_init(&card->tx_queue[i]);
skb_queue_head_init(&card->cli_queue[i]);
- card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
+ card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
if (!card->atmdev[i]) {
dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
atm_remove(card);
goto out;
}
- dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
if (!dev)
goto out_free;
*/
void dpm_resume_noirq(pm_message_t state)
{
- struct device *dev;
+ struct list_head list;
ktime_t starttime = ktime_get();
+ INIT_LIST_HEAD(&list);
mutex_lock(&dpm_list_mtx);
transition_started = false;
- list_for_each_entry(dev, &dpm_list, power.entry)
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.next);
+
+ get_device(dev);
if (dev->power.status > DPM_OFF) {
int error;
dev->power.status = DPM_OFF;
+ mutex_unlock(&dpm_list_mtx);
+
error = device_resume_noirq(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
if (error)
pm_dev_err(dev, state, " early", error);
}
+ if (!list_empty(&dev->power.entry))
+ list_move_tail(&dev->power.entry, &list);
+ put_device(dev);
+ }
+ list_splice(&list, &dpm_list);
mutex_unlock(&dpm_list_mtx);
dpm_show_time(starttime, state, "early");
resume_device_irqs();
*/
int dpm_suspend_noirq(pm_message_t state)
{
- struct device *dev;
+ struct list_head list;
ktime_t starttime = ktime_get();
int error = 0;
+ INIT_LIST_HEAD(&list);
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
- list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.prev);
+
+ get_device(dev);
+ mutex_unlock(&dpm_list_mtx);
+
error = device_suspend_noirq(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
if (error) {
pm_dev_err(dev, state, " late", error);
+ put_device(dev);
break;
}
dev->power.status = DPM_OFF_IRQ;
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &list);
+ put_device(dev);
}
+ list_splice_tail(&list, &dpm_list);
mutex_unlock(&dpm_list_mtx);
if (error)
dpm_resume_noirq(resume_event(state));
{
struct request_queue *q;
int cnt = FD_MAX_UNITS;
- struct request *rq;
+ struct request *rq = NULL;
/* Find next queue we can dispatch from */
fdc_queue = fdc_queue + 1;
{
struct request_queue *q;
int old_pos = fdc_queue;
- struct request *rq;
+ struct request *rq = NULL;
do {
q = unit[fdc_queue].disk->queue;
MODULE_LICENSE("GPL");
static DEFINE_MUTEX(cciss_mutex);
+static struct proc_dir_entry *proc_cciss;
#include "cciss_cmd.h"
#include "cciss.h"
#define ENG_GIG_FACTOR (ENG_GIG/512)
#define ENGAGE_SCSI "engage scsi"
-static struct proc_dir_entry *proc_cciss;
-
static void cciss_seq_show_header(struct seq_file *seq)
{
ctlr_info_t *h = seq->private;
InquiryData_struct *inq_buff = NULL;
for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
+ if (!h->drv[logvol])
+ continue;
if (memcmp(h->drv[logvol]->LunID, drv->LunID,
sizeof(drv->LunID)) == 0) {
FOUND = 1;
int length, /* length of data in buffer */
int func); /* 0 == read, 1 == write */
-static int cciss_scsi_queue_command (struct scsi_cmnd *cmd,
- void (* done)(struct scsi_cmnd *));
+static int cciss_scsi_queue_command (struct Scsi_Host *h,
+ struct scsi_cmnd *cmd);
static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
static int cciss_eh_abort_handler(struct scsi_cmnd *);
static int
-cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
ctlr_info_t *h;
int rc;
return 0;
}
+static DEF_SCSI_QCMD(cciss_scsi_queue_command)
+
static void cciss_unregister_scsi(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
#include <linux/memcontrol.h>
#include <linux/mm_inline.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/pkt_sched.h>
#define __KERNEL_SYSCALLS__
#include <linux/unistd.h>
}
shs = drbd_cmd_handler[cmd].pkt_size - sizeof(union p_header);
- rv = drbd_recv(mdev, &header->h80.payload, shs);
- if (unlikely(rv != shs)) {
- dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
- goto err_out;
- }
-
if (packet_size - shs > 0 && !drbd_cmd_handler[cmd].expect_payload) {
dev_err(DEV, "No payload expected %s l:%d\n", cmdname(cmd), packet_size);
goto err_out;
}
+ if (shs) {
+ rv = drbd_recv(mdev, &header->h80.payload, shs);
+ if (unlikely(rv != shs)) {
+ dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
+ goto err_out;
+ }
+ }
+
rv = drbd_cmd_handler[cmd].function(mdev, cmd, packet_size - shs);
if (unlikely(!rv)) {
}
/* completion of master bio is outside of spinlock.
- * If you need it irqsave, do it your self! */
+ * If you need it irqsave, do it your self!
+ * Which means: don't use from bio endio callback. */
static inline int req_mod(struct drbd_request *req,
enum drbd_req_event what)
{
#include <linux/module.h>
#include <linux/drbd.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/memcontrol.h>
*/
void drbd_endio_pri(struct bio *bio, int error)
{
+ unsigned long flags;
struct drbd_request *req = bio->bi_private;
struct drbd_conf *mdev = req->mdev;
+ struct bio_and_error m;
enum drbd_req_event what;
int uptodate = bio_flagged(bio, BIO_UPTODATE);
bio_put(req->private_bio);
req->private_bio = ERR_PTR(error);
- req_mod(req, what);
+ /* not req_mod(), we need irqsave here! */
+ spin_lock_irqsave(&mdev->req_lock, flags);
+ __req_mod(req, what, &m);
+ spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+ if (m.bio)
+ complete_master_bio(mdev, &m);
}
int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
- Instructions for use
- --------------------
+ For usage instructions, please refer to:
- 1) Map a Linux block device to an existing rbd image.
-
- Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
-
- $ echo "192.168.0.1 name=admin rbd foo" > /sys/class/rbd/add
-
- The snapshot name can be "-" or omitted to map the image read/write.
-
- 2) List all active blkdev<->object mappings.
-
- In this example, we have performed step #1 twice, creating two blkdevs,
- mapped to two separate rados objects in the rados rbd pool
-
- $ cat /sys/class/rbd/list
- #id major client_name pool name snap KB
- 0 254 client4143 rbd foo - 1024000
-
- The columns, in order, are:
- - blkdev unique id
- - blkdev assigned major
- - rados client id
- - rados pool name
- - rados block device name
- - mapped snapshot ("-" if none)
- - device size in KB
-
-
- 3) Create a snapshot.
-
- Usage: <blkdev id> <snapname>
-
- $ echo "0 mysnap" > /sys/class/rbd/snap_create
-
-
- 4) Listing a snapshot.
-
- $ cat /sys/class/rbd/snaps_list
- #id snap KB
- 0 - 1024000 (*)
- 0 foo 1024000
-
- The columns, in order, are:
- - blkdev unique id
- - snapshot name, '-' means none (active read/write version)
- - size of device at time of snapshot
- - the (*) indicates this is the active version
-
- 5) Rollback to snapshot.
-
- Usage: <blkdev id> <snapname>
-
- $ echo "0 mysnap" > /sys/class/rbd/snap_rollback
-
-
- 6) Mapping an image using snapshot.
-
- A snapshot mapping is read-only. This is being done by passing
- snap=<snapname> to the options when adding a device.
-
- $ echo "192.168.0.1 name=admin,snap=mysnap rbd foo" > /sys/class/rbd/add
-
-
- 7) Remove an active blkdev<->rbd image mapping.
-
- In this example, we remove the mapping with blkdev unique id 1.
-
- $ echo 1 > /sys/class/rbd/remove
-
-
- NOTE: The actual creation and deletion of rados objects is outside the scope
- of this driver.
+ Documentation/ABI/testing/sysfs-bus-rbd
*/
u64 len;
};
+struct rbd_snap {
+ struct device dev;
+ const char *name;
+ size_t size;
+ struct list_head node;
+ u64 id;
+};
+
/*
* a single device
*/
int read_only;
struct list_head node;
+
+ /* list of snapshots */
+ struct list_head snaps;
+
+ /* sysfs related */
+ struct device dev;
+};
+
+static struct bus_type rbd_bus_type = {
+ .name = "rbd",
};
static spinlock_t node_lock; /* protects client get/put */
-static struct class *class_rbd; /* /sys/class/rbd */
static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */
static LIST_HEAD(rbd_dev_list); /* devices */
static LIST_HEAD(rbd_client_list); /* clients */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
+static void rbd_dev_release(struct device *dev);
+static ssize_t rbd_snap_rollback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size);
+static ssize_t rbd_snap_add(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count);
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap);;
+
+
+static struct rbd_device *dev_to_rbd(struct device *dev)
+{
+ return container_of(dev, struct rbd_device, dev);
+}
+
+static struct device *rbd_get_dev(struct rbd_device *rbd_dev)
+{
+ return get_device(&rbd_dev->dev);
+}
+
+static void rbd_put_dev(struct rbd_device *rbd_dev)
+{
+ put_device(&rbd_dev->dev);
+}
static int rbd_open(struct block_device *bdev, fmode_t mode)
{
struct gendisk *disk = bdev->bd_disk;
struct rbd_device *rbd_dev = disk->private_data;
+ rbd_get_dev(rbd_dev);
+
set_device_ro(bdev, rbd_dev->read_only);
if ((mode & FMODE_WRITE) && rbd_dev->read_only)
return 0;
}
+static int rbd_release(struct gendisk *disk, fmode_t mode)
+{
+ struct rbd_device *rbd_dev = disk->private_data;
+
+ rbd_put_dev(rbd_dev);
+
+ return 0;
+}
+
static const struct block_device_operations rbd_bd_ops = {
.owner = THIS_MODULE,
.open = rbd_open,
+ .release = rbd_release,
};
/*
int ret = -ENOMEM;
init_rwsem(&header->snap_rwsem);
-
header->snap_names_len = le64_to_cpu(ondisk->snap_names_len);
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
snap_count *
return -ERANGE;
}
+static void __rbd_remove_all_snaps(struct rbd_device *rbd_dev)
+{
+ struct rbd_snap *snap;
+
+ while (!list_empty(&rbd_dev->snaps)) {
+ snap = list_first_entry(&rbd_dev->snaps, struct rbd_snap, node);
+ __rbd_remove_snap_dev(rbd_dev, snap);
+ }
+}
+
/*
* only read the first part of the ondisk header, without the snaps info
*/
-static int rbd_update_snaps(struct rbd_device *rbd_dev)
+static int __rbd_update_snaps(struct rbd_device *rbd_dev)
{
int ret;
struct rbd_image_header h;
rbd_dev->header.total_snaps = h.total_snaps;
rbd_dev->header.snapc = h.snapc;
rbd_dev->header.snap_names = h.snap_names;
+ rbd_dev->header.snap_names_len = h.snap_names_len;
rbd_dev->header.snap_sizes = h.snap_sizes;
rbd_dev->header.snapc->seq = snap_seq;
+ ret = __rbd_init_snaps_header(rbd_dev);
+
up_write(&rbd_dev->header.snap_rwsem);
- return 0;
+ return ret;
}
static int rbd_init_disk(struct rbd_device *rbd_dev)
if (rc)
return rc;
+ /* no need to lock here, as rbd_dev is not registered yet */
+ rc = __rbd_init_snaps_header(rbd_dev);
+ if (rc)
+ return rc;
+
rc = rbd_header_set_snap(rbd_dev, rbd_dev->snap_name, &total_size);
if (rc)
return rc;
return rc;
}
-/********************************************************************
- * /sys/class/rbd/
- * add map rados objects to blkdev
- * remove unmap rados objects
- * list show mappings
- *******************************************************************/
+/*
+ sysfs
+*/
+
+static ssize_t rbd_size_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%llu\n", (unsigned long long)rbd_dev->header.image_size);
+}
+
+static ssize_t rbd_major_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
-static void class_rbd_release(struct class *cls)
+ return sprintf(buf, "%d\n", rbd_dev->major);
+}
+
+static ssize_t rbd_client_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- kfree(cls);
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "client%lld\n", ceph_client_id(rbd_dev->client));
}
-static ssize_t class_rbd_list(struct class *c,
- struct class_attribute *attr,
- char *data)
+static ssize_t rbd_pool_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- int n = 0;
- struct list_head *tmp;
- int max = PAGE_SIZE;
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->pool_name);
+}
+
+static ssize_t rbd_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->obj);
+}
+
+static ssize_t rbd_snap_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->snap_name);
+}
+
+static ssize_t rbd_image_refresh(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int rc;
+ int ret = size;
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- n += snprintf(data, max,
- "#id\tmajor\tclient_name\tpool\tname\tsnap\tKB\n");
+ rc = __rbd_update_snaps(rbd_dev);
+ if (rc < 0)
+ ret = rc;
- list_for_each(tmp, &rbd_dev_list) {
- struct rbd_device *rbd_dev;
+ mutex_unlock(&ctl_mutex);
+ return ret;
+}
- rbd_dev = list_entry(tmp, struct rbd_device, node);
- n += snprintf(data+n, max-n,
- "%d\t%d\tclient%lld\t%s\t%s\t%s\t%lld\n",
- rbd_dev->id,
- rbd_dev->major,
- ceph_client_id(rbd_dev->client),
- rbd_dev->pool_name,
- rbd_dev->obj, rbd_dev->snap_name,
- rbd_dev->header.image_size >> 10);
- if (n == max)
+static DEVICE_ATTR(size, S_IRUGO, rbd_size_show, NULL);
+static DEVICE_ATTR(major, S_IRUGO, rbd_major_show, NULL);
+static DEVICE_ATTR(client_id, S_IRUGO, rbd_client_id_show, NULL);
+static DEVICE_ATTR(pool, S_IRUGO, rbd_pool_show, NULL);
+static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL);
+static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
+static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
+static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
+static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback);
+
+static struct attribute *rbd_attrs[] = {
+ &dev_attr_size.attr,
+ &dev_attr_major.attr,
+ &dev_attr_client_id.attr,
+ &dev_attr_pool.attr,
+ &dev_attr_name.attr,
+ &dev_attr_current_snap.attr,
+ &dev_attr_refresh.attr,
+ &dev_attr_create_snap.attr,
+ &dev_attr_rollback_snap.attr,
+ NULL
+};
+
+static struct attribute_group rbd_attr_group = {
+ .attrs = rbd_attrs,
+};
+
+static const struct attribute_group *rbd_attr_groups[] = {
+ &rbd_attr_group,
+ NULL
+};
+
+static void rbd_sysfs_dev_release(struct device *dev)
+{
+}
+
+static struct device_type rbd_device_type = {
+ .name = "rbd",
+ .groups = rbd_attr_groups,
+ .release = rbd_sysfs_dev_release,
+};
+
+
+/*
+ sysfs - snapshots
+*/
+
+static ssize_t rbd_snap_size_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+ return sprintf(buf, "%lld\n", (long long)snap->size);
+}
+
+static ssize_t rbd_snap_id_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+ return sprintf(buf, "%lld\n", (long long)snap->id);
+}
+
+static DEVICE_ATTR(snap_size, S_IRUGO, rbd_snap_size_show, NULL);
+static DEVICE_ATTR(snap_id, S_IRUGO, rbd_snap_id_show, NULL);
+
+static struct attribute *rbd_snap_attrs[] = {
+ &dev_attr_snap_size.attr,
+ &dev_attr_snap_id.attr,
+ NULL,
+};
+
+static struct attribute_group rbd_snap_attr_group = {
+ .attrs = rbd_snap_attrs,
+};
+
+static void rbd_snap_dev_release(struct device *dev)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+ kfree(snap->name);
+ kfree(snap);
+}
+
+static const struct attribute_group *rbd_snap_attr_groups[] = {
+ &rbd_snap_attr_group,
+ NULL
+};
+
+static struct device_type rbd_snap_device_type = {
+ .groups = rbd_snap_attr_groups,
+ .release = rbd_snap_dev_release,
+};
+
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap)
+{
+ list_del(&snap->node);
+ device_unregister(&snap->dev);
+}
+
+static int rbd_register_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap,
+ struct device *parent)
+{
+ struct device *dev = &snap->dev;
+ int ret;
+
+ dev->type = &rbd_snap_device_type;
+ dev->parent = parent;
+ dev->release = rbd_snap_dev_release;
+ dev_set_name(dev, "snap_%s", snap->name);
+ ret = device_register(dev);
+
+ return ret;
+}
+
+static int __rbd_add_snap_dev(struct rbd_device *rbd_dev,
+ int i, const char *name,
+ struct rbd_snap **snapp)
+{
+ int ret;
+ struct rbd_snap *snap = kzalloc(sizeof(*snap), GFP_KERNEL);
+ if (!snap)
+ return -ENOMEM;
+ snap->name = kstrdup(name, GFP_KERNEL);
+ snap->size = rbd_dev->header.snap_sizes[i];
+ snap->id = rbd_dev->header.snapc->snaps[i];
+ if (device_is_registered(&rbd_dev->dev)) {
+ ret = rbd_register_snap_dev(rbd_dev, snap,
+ &rbd_dev->dev);
+ if (ret < 0)
+ goto err;
+ }
+ *snapp = snap;
+ return 0;
+err:
+ kfree(snap->name);
+ kfree(snap);
+ return ret;
+}
+
+/*
+ * search for the previous snap in a null delimited string list
+ */
+const char *rbd_prev_snap_name(const char *name, const char *start)
+{
+ if (name < start + 2)
+ return NULL;
+
+ name -= 2;
+ while (*name) {
+ if (name == start)
+ return start;
+ name--;
+ }
+ return name + 1;
+}
+
+/*
+ * compare the old list of snapshots that we have to what's in the header
+ * and update it accordingly. Note that the header holds the snapshots
+ * in a reverse order (from newest to oldest) and we need to go from
+ * older to new so that we don't get a duplicate snap name when
+ * doing the process (e.g., removed snapshot and recreated a new
+ * one with the same name.
+ */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev)
+{
+ const char *name, *first_name;
+ int i = rbd_dev->header.total_snaps;
+ struct rbd_snap *snap, *old_snap = NULL;
+ int ret;
+ struct list_head *p, *n;
+
+ first_name = rbd_dev->header.snap_names;
+ name = first_name + rbd_dev->header.snap_names_len;
+
+ list_for_each_prev_safe(p, n, &rbd_dev->snaps) {
+ u64 cur_id;
+
+ old_snap = list_entry(p, struct rbd_snap, node);
+
+ if (i)
+ cur_id = rbd_dev->header.snapc->snaps[i - 1];
+
+ if (!i || old_snap->id < cur_id) {
+ /* old_snap->id was skipped, thus was removed */
+ __rbd_remove_snap_dev(rbd_dev, old_snap);
+ continue;
+ }
+ if (old_snap->id == cur_id) {
+ /* we have this snapshot already */
+ i--;
+ name = rbd_prev_snap_name(name, first_name);
+ continue;
+ }
+ for (; i > 0;
+ i--, name = rbd_prev_snap_name(name, first_name)) {
+ if (!name) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ cur_id = rbd_dev->header.snapc->snaps[i];
+ /* snapshot removal? handle it above */
+ if (cur_id >= old_snap->id)
+ break;
+ /* a new snapshot */
+ ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+ if (ret < 0)
+ return ret;
+
+ /* note that we add it backward so using n and not p */
+ list_add(&snap->node, n);
+ p = &snap->node;
+ }
+ }
+ /* we're done going over the old snap list, just add what's left */
+ for (; i > 0; i--) {
+ name = rbd_prev_snap_name(name, first_name);
+ if (!name) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+ if (ret < 0)
+ return ret;
+ list_add(&snap->node, &rbd_dev->snaps);
+ }
+
+ return 0;
+}
+
+
+static void rbd_root_dev_release(struct device *dev)
+{
+}
+
+static struct device rbd_root_dev = {
+ .init_name = "rbd",
+ .release = rbd_root_dev_release,
+};
+
+static int rbd_bus_add_dev(struct rbd_device *rbd_dev)
+{
+ int ret = -ENOMEM;
+ struct device *dev;
+ struct rbd_snap *snap;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ dev = &rbd_dev->dev;
+
+ dev->bus = &rbd_bus_type;
+ dev->type = &rbd_device_type;
+ dev->parent = &rbd_root_dev;
+ dev->release = rbd_dev_release;
+ dev_set_name(dev, "%d", rbd_dev->id);
+ ret = device_register(dev);
+ if (ret < 0)
+ goto done_free;
+
+ list_for_each_entry(snap, &rbd_dev->snaps, node) {
+ ret = rbd_register_snap_dev(rbd_dev, snap,
+ &rbd_dev->dev);
+ if (ret < 0)
break;
}
mutex_unlock(&ctl_mutex);
- return n;
+ return 0;
+done_free:
+ mutex_unlock(&ctl_mutex);
+ return ret;
}
-static ssize_t class_rbd_add(struct class *c,
- struct class_attribute *attr,
- const char *buf, size_t count)
+static void rbd_bus_del_dev(struct rbd_device *rbd_dev)
+{
+ device_unregister(&rbd_dev->dev);
+}
+
+static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count)
{
struct ceph_osd_client *osdc;
struct rbd_device *rbd_dev;
/* static rbd_device initialization */
spin_lock_init(&rbd_dev->lock);
INIT_LIST_HEAD(&rbd_dev->node);
+ INIT_LIST_HEAD(&rbd_dev->snaps);
/* generate unique id: find highest unique id, add one */
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
}
rbd_dev->major = irc;
+ rc = rbd_bus_add_dev(rbd_dev);
+ if (rc)
+ goto err_out_disk;
/* set up and announce blkdev mapping */
rc = rbd_init_disk(rbd_dev);
if (rc)
err_out_blkdev:
unregister_blkdev(rbd_dev->major, rbd_dev->name);
+err_out_disk:
+ rbd_free_disk(rbd_dev);
err_out_client:
rbd_put_client(rbd_dev);
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
return NULL;
}
-static ssize_t class_rbd_remove(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static void rbd_dev_release(struct device *dev)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, rc;
- unsigned long ul;
-
- rc = strict_strtoul(buf, 10, &ul);
- if (rc)
- return rc;
-
- /* convert to int; abort if we lost anything in the conversion */
- target_id = (int) ul;
- if (target_id != ul)
- return -EINVAL;
-
- /* remove object from list immediately */
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- rbd_dev = __rbd_get_dev(target_id);
- if (rbd_dev)
- list_del_init(&rbd_dev->node);
-
- mutex_unlock(&ctl_mutex);
-
- if (!rbd_dev)
- return -ENOENT;
+ struct rbd_device *rbd_dev =
+ container_of(dev, struct rbd_device, dev);
rbd_put_client(rbd_dev);
/* release module ref */
module_put(THIS_MODULE);
-
- return count;
}
-static ssize_t class_rbd_snaps_list(struct class *c,
- struct class_attribute *attr,
- char *data)
-{
- struct rbd_device *rbd_dev = NULL;
- struct list_head *tmp;
- struct rbd_image_header *header;
- int i, n = 0, max = PAGE_SIZE;
- int ret;
-
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- n += snprintf(data, max, "#id\tsnap\tKB\n");
-
- list_for_each(tmp, &rbd_dev_list) {
- char *names, *p;
- struct ceph_snap_context *snapc;
-
- rbd_dev = list_entry(tmp, struct rbd_device, node);
- header = &rbd_dev->header;
-
- down_read(&header->snap_rwsem);
-
- names = header->snap_names;
- snapc = header->snapc;
-
- n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
- rbd_dev->id, RBD_SNAP_HEAD_NAME,
- header->image_size >> 10,
- (!rbd_dev->cur_snap ? " (*)" : ""));
- if (n == max)
- break;
-
- p = names;
- for (i = 0; i < header->total_snaps; i++, p += strlen(p) + 1) {
- n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
- rbd_dev->id, p, header->snap_sizes[i] >> 10,
- (rbd_dev->cur_snap &&
- (snap_index(header, i) == rbd_dev->cur_snap) ?
- " (*)" : ""));
- if (n == max)
- break;
- }
-
- up_read(&header->snap_rwsem);
- }
-
-
- ret = n;
- mutex_unlock(&ctl_mutex);
- return ret;
-}
-
-static ssize_t class_rbd_snaps_refresh(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_remove(struct bus_type *bus,
+ const char *buf,
+ size_t count)
{
struct rbd_device *rbd_dev = NULL;
int target_id, rc;
goto done;
}
- rc = rbd_update_snaps(rbd_dev);
- if (rc < 0)
- ret = rc;
+ list_del_init(&rbd_dev->node);
+
+ __rbd_remove_all_snaps(rbd_dev);
+ rbd_bus_del_dev(rbd_dev);
done:
mutex_unlock(&ctl_mutex);
return ret;
}
-static ssize_t class_rbd_snap_create(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_snap_add(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, ret;
- char *name;
-
- name = kmalloc(RBD_MAX_SNAP_NAME_LEN + 1, GFP_KERNEL);
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int ret;
+ char *name = kmalloc(count + 1, GFP_KERNEL);
if (!name)
return -ENOMEM;
- /* parse snaps add command */
- if (sscanf(buf, "%d "
- "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
- &target_id,
- name) != 2) {
- ret = -EINVAL;
- goto done;
- }
+ snprintf(name, count, "%s", buf);
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- rbd_dev = __rbd_get_dev(target_id);
- if (!rbd_dev) {
- ret = -ENOENT;
- goto done_unlock;
- }
-
ret = rbd_header_add_snap(rbd_dev,
name, GFP_KERNEL);
if (ret < 0)
goto done_unlock;
- ret = rbd_update_snaps(rbd_dev);
+ ret = __rbd_update_snaps(rbd_dev);
if (ret < 0)
goto done_unlock;
ret = count;
done_unlock:
mutex_unlock(&ctl_mutex);
-done:
kfree(name);
return ret;
}
-static ssize_t class_rbd_rollback(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_snap_rollback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, ret;
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int ret;
u64 snapid;
- char snap_name[RBD_MAX_SNAP_NAME_LEN];
u64 cur_ofs;
- char *seg_name;
+ char *seg_name = NULL;
+ char *snap_name = kmalloc(count + 1, GFP_KERNEL);
+ ret = -ENOMEM;
+ if (!snap_name)
+ return ret;
/* parse snaps add command */
- if (sscanf(buf, "%d "
- "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
- &target_id,
- snap_name) != 2) {
- return -EINVAL;
- }
-
- ret = -ENOMEM;
+ snprintf(snap_name, count, "%s", buf);
seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
if (!seg_name)
- return ret;
+ goto done;
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- rbd_dev = __rbd_get_dev(target_id);
- if (!rbd_dev) {
- ret = -ENOENT;
- goto done_unlock;
- }
-
ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL);
if (ret < 0)
goto done_unlock;
seg_name, ret);
}
- ret = rbd_update_snaps(rbd_dev);
+ ret = __rbd_update_snaps(rbd_dev);
if (ret < 0)
goto done_unlock;
done_unlock:
mutex_unlock(&ctl_mutex);
+done:
kfree(seg_name);
+ kfree(snap_name);
return ret;
}
-static struct class_attribute class_rbd_attrs[] = {
- __ATTR(add, 0200, NULL, class_rbd_add),
- __ATTR(remove, 0200, NULL, class_rbd_remove),
- __ATTR(list, 0444, class_rbd_list, NULL),
- __ATTR(snaps_refresh, 0200, NULL, class_rbd_snaps_refresh),
- __ATTR(snap_create, 0200, NULL, class_rbd_snap_create),
- __ATTR(snaps_list, 0444, class_rbd_snaps_list, NULL),
- __ATTR(snap_rollback, 0200, NULL, class_rbd_rollback),
+static struct bus_attribute rbd_bus_attrs[] = {
+ __ATTR(add, S_IWUSR, NULL, rbd_add),
+ __ATTR(remove, S_IWUSR, NULL, rbd_remove),
__ATTR_NULL
};
/*
* create control files in sysfs
- * /sys/class/rbd/...
+ * /sys/bus/rbd/...
*/
static int rbd_sysfs_init(void)
{
- int ret = -ENOMEM;
+ int ret;
- class_rbd = kzalloc(sizeof(*class_rbd), GFP_KERNEL);
- if (!class_rbd)
- goto out;
+ rbd_bus_type.bus_attrs = rbd_bus_attrs;
- class_rbd->name = DRV_NAME;
- class_rbd->owner = THIS_MODULE;
- class_rbd->class_release = class_rbd_release;
- class_rbd->class_attrs = class_rbd_attrs;
+ ret = bus_register(&rbd_bus_type);
+ if (ret < 0)
+ return ret;
- ret = class_register(class_rbd);
- if (ret)
- goto out_class;
- return 0;
+ ret = device_register(&rbd_root_dev);
-out_class:
- kfree(class_rbd);
- class_rbd = NULL;
- pr_err(DRV_NAME ": failed to create class rbd\n");
-out:
return ret;
}
static void rbd_sysfs_cleanup(void)
{
- if (class_rbd)
- class_destroy(class_rbd);
- class_rbd = NULL;
+ device_unregister(&rbd_root_dev);
+ bus_unregister(&rbd_bus_type);
}
int __init rbd_init(void)
struct blk_shadow {
struct blkif_request req;
- unsigned long request;
+ struct request *request;
unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
};
static DEFINE_MUTEX(blkfront_mutex);
static const struct block_device_operations xlvbd_block_fops;
-#define BLK_RING_SIZE __RING_SIZE((struct blkif_sring *)0, PAGE_SIZE)
+#define BLK_RING_SIZE __CONST_RING_SIZE(blkif, PAGE_SIZE)
/*
* We have one of these per vbd, whether ide, scsi or 'other'. They
unsigned long id)
{
info->shadow[id].req.id = info->shadow_free;
- info->shadow[id].request = 0;
+ info->shadow[id].request = NULL;
info->shadow_free = id;
}
}
/*
- * blkif_queue_request
+ * Generate a Xen blkfront IO request from a blk layer request. Reads
+ * and writes are handled as expected. Since we lack a loose flush
+ * request, we map flushes into a full ordered barrier.
*
- * request block io
- *
- * id: for guest use only.
- * operation: BLKIF_OP_{READ,WRITE,PROBE}
- * buffer: buffer to read/write into. this should be a
- * virtual address in the guest os.
+ * @req: a request struct
*/
static int blkif_queue_request(struct request *req)
{
/* Fill out a communications ring structure. */
ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
id = get_id_from_freelist(info);
- info->shadow[id].request = (unsigned long)req;
+ info->shadow[id].request = req;
ring_req->id = id;
ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
+ if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+ /*
+ * Ideally we could just do an unordered
+ * flush-to-disk, but all we have is a full write
+ * barrier at the moment. However, a barrier write is
+ * a superset of FUA, so we can implement it the same
+ * way. (It's also a FLUSH+FUA, since it is
+ * guaranteed ordered WRT previous writes.)
+ */
+ ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+ }
+
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
bret = RING_GET_RESPONSE(&info->ring, i);
id = bret->id;
- req = (struct request *)info->shadow[id].request;
+ req = info->shadow[id].request;
blkif_completion(&info->shadow[id]);
printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
info->gd->disk_name);
error = -EOPNOTSUPP;
+ }
+ if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+ info->shadow[id].req.nr_segments == 0)) {
+ printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n",
+ info->gd->disk_name);
+ error = -EOPNOTSUPP;
+ }
+ if (unlikely(error)) {
+ if (error == -EOPNOTSUPP)
+ error = 0;
info->feature_flush = 0;
xlvbd_flush(info);
}
/* Stage 3: Find pending requests and requeue them. */
for (i = 0; i < BLK_RING_SIZE; i++) {
/* Not in use? */
- if (copy[i].request == 0)
+ if (!copy[i].request)
continue;
/* Grab a request slot and copy shadow state into it. */
req->seg[j].gref,
info->xbdev->otherend_id,
pfn_to_mfn(info->shadow[req->id].frame[j]),
- rq_data_dir(
- (struct request *)
- info->shadow[req->id].request));
+ rq_data_dir(info->shadow[req->id].request));
info->shadow[req->id].req = *req;
info->ring.req_prod_pvt++;
*/
info->feature_flush = 0;
- /*
- * The driver doesn't properly handled empty flushes, so
- * lets disable barrier support for now.
- */
-#if 0
if (!err && barrier)
- info->feature_flush = REQ_FLUSH;
-#endif
+ info->feature_flush = REQ_FLUSH | REQ_FUA;
err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
if (err) {
static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 */
{ USB_DEVICE(0x0CF3, 0x3000) },
+
+ /* Atheros AR3011 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x3002) },
+
{ } /* Terminating entry */
};
/* Broadcom BCM2033 without firmware */
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
+ /* Atheros 3011 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
hu->proto->close(hu);
- hci_unregister_dev(hdev);
- hci_free_dev(hdev);
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ }
}
}
}
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include "agp.h"
static void i830_cleanup(void)
{
- kunmap(intel_private.i8xx_page);
- intel_private.i8xx_flush_page = NULL;
+ if (intel_private.i8xx_flush_page) {
+ kunmap(intel_private.i8xx_flush_page);
+ intel_private.i8xx_flush_page = NULL;
+ }
__free_page(intel_private.i8xx_page);
intel_private.i8xx_page = NULL;
writel(1, intel_private.i9xx_flush_page);
}
-static void i965_write_entry(dma_addr_t addr, unsigned int entry,
+static void i965_write_entry(dma_addr_t addr,
+ unsigned int entry,
unsigned int flags)
{
+ u32 pte_flags;
+
+ pte_flags = I810_PTE_VALID;
+ if (flags == AGP_USER_CACHED_MEMORY)
+ pte_flags |= I830_PTE_SYSTEM_CACHED;
+
/* Shift high bits down */
addr |= (addr >> 28) & 0xf0;
- writel(addr | I810_PTE_VALID, intel_private.gtt + entry);
+ writel(addr | pte_flags, intel_private.gtt + entry);
}
static bool gen6_check_flags(unsigned int flags)
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/major.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
int eax = regs->eax;
#if defined(CONFIG_X86_64)
- asm("pushq %%rax\n\t"
+ asm volatile("pushq %%rax\n\t"
"movl 0(%%rax),%%edx\n\t"
"pushq %%rdx\n\t"
"movl 4(%%rax),%%ebx\n\t"
"lahf\n\t"
"shrl $8,%%eax\n\t"
"andl $1,%%eax\n"
- :"=a"(rc), "+m" (*regs)
+ :"=a"(rc)
: "a"(regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
#else
- asm("pushl %%eax\n\t"
+ asm volatile("pushl %%eax\n\t"
"movl 0(%%eax),%%edx\n\t"
"push %%edx\n\t"
"movl 4(%%eax),%%ebx\n\t"
"lahf\n\t"
"shrl $8,%%eax\n\t"
"andl $1,%%eax\n"
- :"=a"(rc), "+m" (*regs)
+ :"=a"(rc)
: "a"(regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
#endif
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/ramoops.h>
#define RAMOOPS_KERNMSG_HDR "===="
-#define RAMOOPS_HEADER_SIZE (5 + sizeof(struct timeval))
#define RECORD_SIZE 4096
struct ramoops_context, dump);
unsigned long s1_start, s2_start;
unsigned long l1_cpy, l2_cpy;
- int res;
- char *buf;
+ int res, hdr_size;
+ char *buf, *buf_orig;
struct timeval timestamp;
/* Only dump oopses if dump_oops is set */
return;
buf = (char *)(cxt->virt_addr + (cxt->count * RECORD_SIZE));
+ buf_orig = buf;
+
memset(buf, '\0', RECORD_SIZE);
res = sprintf(buf, "%s", RAMOOPS_KERNMSG_HDR);
buf += res;
res = sprintf(buf, "%lu.%lu\n", (long)timestamp.tv_sec, (long)timestamp.tv_usec);
buf += res;
- l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE));
- l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE) - l2_cpy);
+ hdr_size = buf - buf_orig;
+ l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - hdr_size));
+ l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - hdr_size) - l2_cpy);
s2_start = l2 - l2_cpy;
s1_start = l1 - l1_cpy;
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/serialP.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/fcntl.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/stallion.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
+#include <linux/acpi.h>
#include "tpm.h"
#define TPM_HEADER_SIZE 10
static LIST_HEAD(tis_chips);
static DEFINE_SPINLOCK(tis_lock);
+#ifdef CONFIG_ACPI
+static int is_itpm(struct pnp_dev *dev)
+{
+ struct acpi_device *acpi = pnp_acpi_device(dev);
+ struct acpi_hardware_id *id;
+
+ list_for_each_entry(id, &acpi->pnp.ids, list) {
+ if (!strcmp("INTC0102", id->id))
+ return 1;
+ }
+
+ return 0;
+}
+#else
+static int is_itpm(struct pnp_dev *dev)
+{
+ return 0;
+}
+#endif
+
static int check_locality(struct tpm_chip *chip, int l)
{
if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
+ if (is_itpm(to_pnp_dev(dev)))
+ itpm = 1;
+
if (itpm)
dev_info(dev, "Intel iTPM workaround enabled\n");
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/math64.h>
-#include <linux/smp_lock.h>
#include <asm/genapic.h>
#include <asm/uv/uv_hub.h>
nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
- if (!vqs) {
- err = -ENOMEM;
- goto fail;
- }
io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
- if (!io_callbacks) {
- err = -ENOMEM;
- goto free_vqs;
- }
io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
- if (!io_names) {
- err = -ENOMEM;
- goto free_callbacks;
- }
portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
GFP_KERNEL);
- if (!portdev->in_vqs) {
- err = -ENOMEM;
- goto free_names;
- }
portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
GFP_KERNEL);
- if (!portdev->out_vqs) {
+ if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
+ !portdev->out_vqs) {
err = -ENOMEM;
- goto free_invqs;
+ goto free;
}
/*
io_callbacks,
(const char **)io_names);
if (err)
- goto free_outvqs;
+ goto free;
j = 0;
portdev->in_vqs[0] = vqs[0];
portdev->out_vqs[i] = vqs[j + 1];
}
}
- kfree(io_callbacks);
kfree(io_names);
+ kfree(io_callbacks);
kfree(vqs);
return 0;
-free_names:
- kfree(io_names);
-free_callbacks:
- kfree(io_callbacks);
-free_outvqs:
+free:
kfree(portdev->out_vqs);
-free_invqs:
kfree(portdev->in_vqs);
-free_vqs:
+ kfree(io_names);
+ kfree(io_callbacks);
kfree(vqs);
-fail:
+
return err;
}
} while (delay);
}
-static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
{
- unsigned long flags;
-
if (delta > p->max_match_value)
dev_warn(&p->pdev->dev, "delta out of range\n");
- spin_lock_irqsave(&p->lock, flags);
p->next_match_value = delta;
sh_cmt_clock_event_program_verify(p, 0);
+}
+
+static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->lock, flags);
+ __sh_cmt_set_next(p, delta);
spin_unlock_irqrestore(&p->lock, flags);
}
/* setup timeout if no clockevent */
if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
- sh_cmt_set_next(p, p->max_match_value);
+ __sh_cmt_set_next(p, p->max_match_value);
out:
spin_unlock_irqrestore(&p->lock, flags);
/* adjust the timeout to maximum if only clocksource left */
if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
- sh_cmt_set_next(p, p->max_match_value);
+ __sh_cmt_set_next(p, p->max_match_value);
spin_unlock_irqrestore(&p->lock, flags);
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
+MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_CONNECTOR);
static struct cn_dev cdev;
ifeq ($(CONFIG_DMADEVICES_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
+ ccflags-y += -DDEBUG
endif
ifeq ($(CONFIG_DMADEVICES_VDEBUG),y)
- EXTRA_CFLAGS += -DVERBOSE_DEBUG
+ ccflags-y += -DVERBOSE_DEBUG
endif
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
desc->lli.daddr = mem;
desc->lli.ctrla = ctrla
| ATC_DST_WIDTH(mem_width)
- | len >> mem_width;
+ | len >> reg_width;
desc->lli.ctrlb = ctrlb;
if (!first) {
* EIE - Error interrupt enable
* EOSIE - End of segments interrupt enable (basic mode)
* EOLNIE - End of links interrupt enable
+ * BWC - Bandwidth sharing among channels
*/
- DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_EIE
- | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32);
+ DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_BWC
+ | FSL_DMA_MR_EIE | FSL_DMA_MR_EOLNIE
+ | FSL_DMA_MR_EOSIE, 32);
break;
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author:
* Zhang Wei <wei.zhang@freescale.com>, Jul 2007
#define FSL_DMA_MR_DAHE 0x00002000
#define FSL_DMA_MR_SAHE 0x00001000
+/*
+ * Bandwidth/pause control determines how many bytes a given
+ * channel is allowed to transfer before the DMA engine pauses
+ * the current channel and switches to the next channel
+ */
+#define FSL_DMA_MR_BWC 0x08000000
+
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
#define FSL_DMA_MR_PRC_RM 0x00000800
return 0;
err_init:
- while (i-- >= 0) {
+ while (--i >= 0) {
struct imxdma_channel *imxdmac = &imxdma->channel[i];
imx_dma_free(imxdmac->imxdma_channel);
}
struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
int param;
- bd->buffer_addr = sgl->dma_address;
+ bd->buffer_addr = sg->dma_address;
count = sg->length;
{
return platform_driver_probe(&sdma_driver, sdma_probe);
}
-subsys_initcall(sdma_module_init);
+module_init(sdma_module_init);
MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
MODULE_DESCRIPTION("i.MX SDMA driver");
if (NULL == dma->dma_pool) {
pr_err("ERR_MDMA:pci_pool_create failed\n");
err = -ENOMEM;
- kfree(dma);
goto err_dma_pool;
}
free_irq(pdev->irq, dma);
err_irq:
pci_pool_destroy(dma->dma_pool);
- kfree(dma);
err_dma_pool:
pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
return err;
.runtime_idle = dma_runtime_idle,
};
-static struct pci_driver intel_mid_dma_pci = {
+static struct pci_driver intel_mid_dma_pci_driver = {
.name = "Intel MID DMA",
.id_table = intel_mid_dma_ids,
.probe = intel_mid_dma_probe,
{
pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
INTEL_MID_DMA_DRIVER_VERSION);
- return pci_register_driver(&intel_mid_dma_pci);
+ return pci_register_driver(&intel_mid_dma_pci_driver);
}
fs_initcall(intel_mid_dma_init);
static void __exit intel_mid_dma_exit(void)
{
- pci_unregister_driver(&intel_mid_dma_pci);
+ pci_unregister_driver(&intel_mid_dma_pci_driver);
}
module_exit(intel_mid_dma_exit);
obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
-ioatdma-objs := pci.o dma.o dma_v2.o dma_v3.o dca.o
+ioatdma-y := pci.o dma.o dma_v2.o dma_v3.o dca.o
static void mv_xor_tasklet(unsigned long data)
{
struct mv_xor_chan *chan = (struct mv_xor_chan *) data;
- __mv_xor_slot_cleanup(chan);
+ mv_xor_slot_cleanup(chan);
}
static struct mv_xor_desc_slot *
return;
}
- channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
- channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
- channel_writel(pd_chan, SIZE, desc->regs.size);
- channel_writel(pd_chan, NEXT, desc->regs.next);
-
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> dev_addr: %x\n",
pd_chan->chan.chan_id, desc->regs.dev_addr);
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> mem_addr: %x\n",
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> next: %x\n",
pd_chan->chan.chan_id, desc->regs.next);
- if (list_empty(&desc->tx_list))
+ if (list_empty(&desc->tx_list)) {
+ channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
+ channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
+ channel_writel(pd_chan, SIZE, desc->regs.size);
+ channel_writel(pd_chan, NEXT, desc->regs.next);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_ONESHOT);
- else
+ } else {
+ channel_writel(pd_chan, NEXT, desc->txd.phys);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG);
+ }
val = dma_readl(pd, CTL2);
val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id);
if (!request_mem_region(res.start, resource_size(&res),
dev_driver_string(&ofdev->dev))) {
- dev_err(&ofdev->dev, "failed to request memory region "
- "(0x%016llx-0x%016llx)\n",
- (u64)res.start, (u64)res.end);
+ dev_err(&ofdev->dev, "failed to request memory region %pR\n",
+ &res);
initcode = PPC_ADMA_INIT_MEMREG;
ret = -EBUSY;
goto out;
MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-dma-engine");
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
obj-$(CONFIG_EDAC_MCE) += edac_mce.o
-edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
-edac_core-objs += edac_module.o edac_device_sysfs.o
+edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y += edac_module.o edac_device_sysfs.o
ifdef CONFIG_PCI
-edac_core-objs += edac_pci.o edac_pci_sysfs.o
+edac_core-y += edac_pci.o edac_pci_sysfs.o
endif
obj-$(CONFIG_EDAC_MCE_INJ) += mce_amd_inj.o
-edac_mce_amd-objs := mce_amd.o
+edac_mce_amd-y := mce_amd.o
obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n",
hole_off, hole_valid, intlv_sel);
- if (intlv_en ||
+ if (intlv_en &&
(intlv_sel != ((sys_addr >> 12) & intlv_en)))
return -EINVAL;
#define MC_PROC_NAME_MAX_LEN 7
#if PAGE_SHIFT < 20
-#define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) )
-#define MiB_TO_PAGES(mb) ((mb) >> (20 - PAGE_SHIFT))
+#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT))
+#define MiB_TO_PAGES(mb) ((mb) << (20 - PAGE_SHIFT))
#else /* PAGE_SHIFT > 20 */
-#define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) )
+#define PAGES_TO_MiB(pages) ((pages) << (PAGE_SHIFT - 20))
#define MiB_TO_PAGES(mb) ((mb) >> (PAGE_SHIFT - 20))
#endif
return NULL;
}
- /* marking MCI offline */
- mci->op_state = OP_OFFLINE;
-
del_mc_from_global_list(mci);
mutex_unlock(&mem_ctls_mutex);
- /* flush workq processes and remove sysfs */
+ /* flush workq processes */
edac_mc_workq_teardown(mci);
+
+ /* marking MCI offline */
+ mci->op_state = OP_OFFLINE;
+
+ /* remove from sysfs */
edac_remove_sysfs_mci_device(mci);
edac_printk(KERN_INFO, EDAC_MC,
return 0;
err_sysfs_create:
- while (i-- >= 0)
+ while (--i >= 0)
sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
kobject_del(mce_kobj);
*/
#include <linux/bug.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
#include <asm/unaligned.h>
#include <net/arp.h>
-#define FWNET_MAX_FRAGMENTS 25 /* arbitrary limit */
-#define FWNET_ISO_PAGE_COUNT (PAGE_SIZE < 16 * 1024 ? 4 : 2)
+/* rx limits */
+#define FWNET_MAX_FRAGMENTS 30 /* arbitrary, > TX queue depth */
+#define FWNET_ISO_PAGE_COUNT (PAGE_SIZE < 16*1024 ? 4 : 2)
+
+/* tx limits */
+#define FWNET_MAX_QUEUED_DATAGRAMS 20 /* < 64 = number of tlabels */
+#define FWNET_MIN_QUEUED_DATAGRAMS 10 /* should keep AT DMA busy enough */
+#define FWNET_TX_QUEUE_LEN FWNET_MAX_QUEUED_DATAGRAMS /* ? */
#define IEEE1394_BROADCAST_CHANNEL 31
#define IEEE1394_ALL_NODES (0xffc0 | 0x003f)
struct fw_address_handler handler;
u64 local_fifo;
- /* List of packets to be sent */
- struct list_head packet_list;
- /*
- * List of packets that were broadcasted. When we get an ISO interrupt
- * one of them has been sent
- */
- struct list_head broadcasted_list;
- /* List of packets that have been sent but not yet acked */
- struct list_head sent_list;
+ /* Number of tx datagrams that have been queued but not yet acked */
+ int queued_datagrams;
struct list_head peer_list;
struct fw_card *card;
unsigned pdg_size; /* pd_list size */
u16 datagram_label; /* outgoing datagram label */
- unsigned max_payload; /* includes RFC2374_FRAG_HDR_SIZE overhead */
+ u16 max_payload; /* includes RFC2374_FRAG_HDR_SIZE overhead */
int node_id;
int generation;
unsigned speed;
/* This is our task struct. It's used for the packet complete callback. */
struct fwnet_packet_task {
- /*
- * ptask can actually be on dev->packet_list, dev->broadcasted_list,
- * or dev->sent_list depending on its current state.
- */
- struct list_head pt_link;
struct fw_transaction transaction;
struct rfc2734_header hdr;
struct sk_buff *skb;
struct fwnet_device *dev;
int outstanding_pkts;
- unsigned max_payload;
u64 fifo_addr;
u16 dest_node;
+ u16 max_payload;
u8 generation;
u8 speed;
+ u8 enqueued;
};
/*
net->stats.rx_packets++;
net->stats.rx_bytes += skb->len;
}
- if (netif_queue_stopped(net))
- netif_wake_queue(net);
return 0;
net->stats.rx_dropped++;
dev_kfree_skb_any(skb);
- if (netif_queue_stopped(net))
- netif_wake_queue(net);
return -ENOENT;
}
* Datagram is not complete, we're done for the
* moment.
*/
- spin_unlock_irqrestore(&dev->lock, flags);
-
- return 0;
+ retval = 0;
fail:
spin_unlock_irqrestore(&dev->lock, flags);
- if (netif_queue_stopped(net))
- netif_wake_queue(net);
-
return retval;
}
kmem_cache_free(fwnet_packet_task_cache, ptask);
}
+/* Caller must hold dev->lock. */
+static void dec_queued_datagrams(struct fwnet_device *dev)
+{
+ if (--dev->queued_datagrams == FWNET_MIN_QUEUED_DATAGRAMS)
+ netif_wake_queue(dev->netdev);
+}
+
static int fwnet_send_packet(struct fwnet_packet_task *ptask);
static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
{
struct fwnet_device *dev = ptask->dev;
+ struct sk_buff *skb = ptask->skb;
unsigned long flags;
bool free;
ptask->outstanding_pkts--;
/* Check whether we or the networking TX soft-IRQ is last user. */
- free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+ free = (ptask->outstanding_pkts == 0 && ptask->enqueued);
+ if (free)
+ dec_queued_datagrams(dev);
- if (ptask->outstanding_pkts == 0)
- list_del(&ptask->pt_link);
+ if (ptask->outstanding_pkts == 0) {
+ dev->netdev->stats.tx_packets++;
+ dev->netdev->stats.tx_bytes += skb->len;
+ }
spin_unlock_irqrestore(&dev->lock, flags);
u16 fg_off;
u16 datagram_label;
u16 lf;
- struct sk_buff *skb;
/* Update the ptask to point to the next fragment and send it */
lf = fwnet_get_hdr_lf(&ptask->hdr);
datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
break;
}
- skb = ptask->skb;
+
skb_pull(skb, ptask->max_payload);
if (ptask->outstanding_pkts > 1) {
fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
fwnet_free_ptask(ptask);
}
+static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
+{
+ struct fwnet_device *dev = ptask->dev;
+ unsigned long flags;
+ bool free;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* One fragment failed; don't try to send remaining fragments. */
+ ptask->outstanding_pkts = 0;
+
+ /* Check whether we or the networking TX soft-IRQ is last user. */
+ free = ptask->enqueued;
+ if (free)
+ dec_queued_datagrams(dev);
+
+ dev->netdev->stats.tx_dropped++;
+ dev->netdev->stats.tx_errors++;
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ if (free)
+ fwnet_free_ptask(ptask);
+}
+
static void fwnet_write_complete(struct fw_card *card, int rcode,
void *payload, size_t length, void *data)
{
ptask = data;
- if (rcode == RCODE_COMPLETE)
+ if (rcode == RCODE_COMPLETE) {
fwnet_transmit_packet_done(ptask);
- else
+ } else {
fw_error("fwnet_write_complete: failed: %x\n", rcode);
- /* ??? error recovery */
+ fwnet_transmit_packet_failed(ptask);
+ }
}
static int fwnet_send_packet(struct fwnet_packet_task *ptask)
spin_lock_irqsave(&dev->lock, flags);
/* If the AT tasklet already ran, we may be last user. */
- free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
if (!free)
- list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+ ptask->enqueued = true;
+ else
+ dec_queued_datagrams(dev);
spin_unlock_irqrestore(&dev->lock, flags);
spin_lock_irqsave(&dev->lock, flags);
/* If the AT tasklet already ran, we may be last user. */
- free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
if (!free)
- list_add_tail(&ptask->pt_link, &dev->sent_list);
+ ptask->enqueued = true;
+ else
+ dec_queued_datagrams(dev);
spin_unlock_irqrestore(&dev->lock, flags);
struct fwnet_peer *peer;
unsigned long flags;
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* Can this happen? */
+ if (netif_queue_stopped(dev->netdev)) {
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return NETDEV_TX_BUSY;
+ }
+
ptask = kmem_cache_alloc(fwnet_packet_task_cache, GFP_ATOMIC);
if (ptask == NULL)
goto fail;
proto = hdr_buf.h_proto;
dg_size = skb->len;
- /* serialize access to peer, including peer->datagram_label */
- spin_lock_irqsave(&dev->lock, flags);
-
/*
* Set the transmission type for the packet. ARP packets and IP
* broadcast packets are sent via GASP.
peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
- goto fail_unlock;
+ goto fail;
generation = peer->generation;
dest_node = peer->node_id;
max_payload += RFC2374_FRAG_HDR_SIZE;
}
+ if (++dev->queued_datagrams == FWNET_MAX_QUEUED_DATAGRAMS)
+ netif_stop_queue(dev->netdev);
+
spin_unlock_irqrestore(&dev->lock, flags);
ptask->max_payload = max_payload;
- INIT_LIST_HEAD(&ptask->pt_link);
+ ptask->enqueued = 0;
fwnet_send_packet(ptask);
return NETDEV_TX_OK;
- fail_unlock:
- spin_unlock_irqrestore(&dev->lock, flags);
fail:
+ spin_unlock_irqrestore(&dev->lock, flags);
+
if (ptask)
kmem_cache_free(fwnet_packet_task_cache, ptask);
net->addr_len = FWNET_ALEN;
net->hard_header_len = FWNET_HLEN;
net->type = ARPHRD_IEEE1394;
- net->tx_queue_len = 10;
+ net->tx_queue_len = FWNET_TX_QUEUE_LEN;
}
/* caller must hold fwnet_device_mutex */
dev->broadcast_rcv_context = NULL;
dev->broadcast_xmt_max_payload = 0;
dev->broadcast_xmt_datagramlabel = 0;
-
dev->local_fifo = FWNET_NO_FIFO_ADDR;
-
- INIT_LIST_HEAD(&dev->packet_list);
- INIT_LIST_HEAD(&dev->broadcasted_list);
- INIT_LIST_HEAD(&dev->sent_list);
+ dev->queued_datagrams = 0;
INIT_LIST_HEAD(&dev->peer_list);
-
dev->card = card;
dev->netdev = net;
struct fwnet_peer *peer = dev_get_drvdata(_dev);
struct fwnet_device *dev = peer->dev;
struct net_device *net;
- struct fwnet_packet_task *ptask, *pt_next;
+ int i;
mutex_lock(&fwnet_device_mutex);
dev->card);
fw_iso_context_destroy(dev->broadcast_rcv_context);
}
- list_for_each_entry_safe(ptask, pt_next,
- &dev->packet_list, pt_link) {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
- }
- list_for_each_entry_safe(ptask, pt_next,
- &dev->broadcasted_list, pt_link) {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
- }
- list_for_each_entry_safe(ptask, pt_next,
- &dev->sent_list, pt_link) {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
- }
+ for (i = 0; dev->queued_datagrams && i < 5; i++)
+ ssleep(1);
+ WARN_ON(dev->queued_datagrams);
list_del(&dev->dev_link);
free_netdev(net);
static char ohci_driver_name[] = KBUILD_MODNAME;
+#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
- unsigned short vendor, device, flags;
+ unsigned short vendor, device, revision, flags;
} ohci_quirks[] = {
- {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, QUIRK_CYCLE_TIMER |
- QUIRK_RESET_PACKET |
- QUIRK_NO_1394A},
- {PCI_VENDOR_ID_TI, PCI_ANY_ID, QUIRK_RESET_PACKET},
- {PCI_VENDOR_ID_AL, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
- {PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_VIA, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
+ {PCI_VENDOR_ID_AL, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, PCI_ANY_ID,
+ QUIRK_BE_HEADERS},
+
+ {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
+ QUIRK_NO_MSI},
+
+ {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
+ QUIRK_NO_MSI},
+
+ {PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
+
+ {PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_RESET_PACKET},
+
+ {PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
};
/* This overrides anything that was found in ohci_quirks[]. */
}
for (i = 0; i < ARRAY_SIZE(ohci_quirks); i++)
- if (ohci_quirks[i].vendor == dev->vendor &&
- (ohci_quirks[i].device == dev->device ||
- ohci_quirks[i].device == (unsigned short)PCI_ANY_ID)) {
+ if ((ohci_quirks[i].vendor == dev->vendor) &&
+ (ohci_quirks[i].device == (unsigned short)PCI_ANY_ID ||
+ ohci_quirks[i].device == dev->device) &&
+ (ohci_quirks[i].revision == (unsigned short)PCI_ANY_ID ||
+ ohci_quirks[i].revision >= dev->revision)) {
ohci->quirks = ohci_quirks[i].flags;
break;
}
/* SCSI stack integration */
-static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
+static int sbp2_scsi_queuecommand_lck(struct scsi_cmnd *cmd, scsi_done_fn_t done)
{
struct sbp2_logical_unit *lu = cmd->device->hostdata;
struct fw_device *device = target_device(lu->tgt);
return retval;
}
+static DEF_SCSI_QCMD(sbp2_scsi_queuecommand)
+
static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
{
struct sbp2_logical_unit *lu = sdev->hostdata;
* registers, see include/linux/cs5535.h.
*/
+static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
+ unsigned int reg)
+{
+ unsigned long addr = chip->base + 0x80 + reg;
+
+ /*
+ * According to the CS5536 errata (#36), after suspend
+ * a write to the high bank GPIO register will clear all
+ * non-selected bits; the recommended workaround is a
+ * read-modify-write operation.
+ *
+ * Don't apply this errata to the edge status GPIOs, as writing
+ * to their lower bits will clear them.
+ */
+ if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS) {
+ if (val & 0xffff)
+ val |= (inl(addr) & 0xffff); /* ignore the high bits */
+ else
+ val |= (inl(addr) ^ (val >> 16));
+ }
+ outl(val, addr);
+}
+
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
outl(1 << offset, chip->base + reg);
else
/* high bank register */
- outl(1 << (offset - 16), chip->base + 0x80 + reg);
+ errata_outl(chip, 1 << (offset - 16), reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
- outl(1 << offset, chip->base + 0x80 + reg);
+ errata_outl(chip, 1 << offset, reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
err = gpio_direction_output(gpio,
(flags & GPIOF_INIT_HIGH) ? 1 : 0);
+ if (err)
+ gpio_free(gpio);
+
return err;
}
EXPORT_SYMBOL_GPL(gpio_request_one);
struct rdc321x_gpio *rdc321x_gpio_dev;
struct rdc321x_gpio_pdata *pdata;
- pdata = pdev->dev.platform_data;
+ pdata = platform_get_drvdata(pdev);
if (!pdata) {
dev_err(&pdev->dev, "no platform data supplied\n");
return -ENODEV;
{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 },
{ DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 },
{ DRM_MODE_CONNECTOR_Component, "Component", 0 },
- { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 },
- { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 },
- { DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
- { DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
+ { DRM_MODE_CONNECTOR_9PinDIN, "DIN", 0 },
+ { DRM_MODE_CONNECTOR_DisplayPort, "DP", 0 },
+ { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A", 0 },
+ { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 },
{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
- { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 },
+ { DRM_MODE_CONNECTOR_eDP, "eDP", 0 },
};
static struct drm_prop_enum_list drm_encoder_enum_list[] =
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
int ret = 0;
+ int i;
DRM_DEBUG_KMS("\n");
if (ret != 0)
goto fail;
}
+ DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
+ for (i = 0; i < set->num_connectors; i++) {
+ DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
+ drm_get_connector_name(set->connectors[i]));
+ set->connectors[i]->dpms = DRM_MODE_DPMS_ON;
+ }
kfree(save_connectors);
kfree(save_encoders);
struct delayed_work *delayed_work = to_delayed_work(work);
struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
struct drm_connector *connector;
- enum drm_connector_status old_status, status;
+ enum drm_connector_status old_status;
bool repoll = false, changed = false;
if (!drm_kms_helper_poll)
!(connector->polled & DRM_CONNECTOR_POLL_HPD))
continue;
- status = connector->funcs->detect(connector, false);
- if (old_status != status)
+ connector->status = connector->funcs->detect(connector, false);
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
+ connector->base.id,
+ drm_get_connector_name(connector),
+ old_status, connector->status);
+ if (old_status != connector->status)
changed = true;
}
#include "drmP.h"
#include <linux/poll.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
/* from BKL pushdown: note that nothing else serializes idr_find() */
DEFINE_MUTEX(drm_global_mutex);
struct timeval now;
unsigned long flags;
unsigned int seq;
+ int ret;
e = kzalloc(sizeof *e, GFP_KERNEL);
- if (e == NULL)
- return -ENOMEM;
+ if (e == NULL) {
+ ret = -ENOMEM;
+ goto err_put;
+ }
e->pipe = pipe;
e->base.pid = current->pid;
spin_lock_irqsave(&dev->event_lock, flags);
if (file_priv->event_space < sizeof e->event) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(e);
- return -ENOMEM;
+ ret = -EBUSY;
+ goto err_unlock;
}
file_priv->event_space -= sizeof e->event;
if ((seq - vblwait->request.sequence) <= (1 << 23)) {
e->event.tv_sec = now.tv_sec;
e->event.tv_usec = now.tv_usec;
- drm_vblank_put(dev, e->pipe);
+ drm_vblank_put(dev, pipe);
list_add_tail(&e->base.link, &e->base.file_priv->event_list);
wake_up_interruptible(&e->base.file_priv->event_wait);
trace_drm_vblank_event_delivered(current->pid, pipe,
spin_unlock_irqrestore(&dev->event_lock, flags);
return 0;
+
+err_unlock:
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ kfree(e);
+err_put:
+ drm_vblank_put(dev, pipe);
+ return ret;
}
/**
static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
{
- return connector_status_unknown;
+ return connector_status_connected;
}
static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
+#include "../../../platform/x86/intel_ips.h"
#include <linux/pci.h>
#include <linux/vgaarb.h>
#include <linux/acpi.h>
case I915_PARAM_HAS_BLT:
value = HAS_BLT(dev);
break;
+ case I915_PARAM_HAS_COHERENT_RINGS:
+ value = 1;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
}
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
+/**
+ * Tells the intel_ips driver that the i915 driver is now loaded, if
+ * IPS got loaded first.
+ *
+ * This awkward dance is so that neither module has to depend on the
+ * other in order for IPS to do the appropriate communication of
+ * GPU turbo limits to i915.
+ */
+static void
+ips_ping_for_i915_load(void)
+{
+ void (*link)(void);
+
+ link = symbol_get(ips_link_to_i915_driver);
+ if (link) {
+ link();
+ symbol_put(ips_link_to_i915_driver);
+ }
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
+ ips_ping_for_i915_load();
+
return 0;
out_workqueue_free:
static const struct intel_device_info intel_ironlake_m_info = {
.gen = 5, .is_mobile = 1,
- .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1, .has_hotplug = 1,
+ .need_gfx_hws = 1, .has_rc6 = 1, .has_hotplug = 1,
+ .has_fbc = 0, /* disabled due to buggy hardware */
.has_bsd_ring = 1,
};
int i915_gem_object_set_domain(struct drm_gem_object *obj,
uint32_t read_domains,
uint32_t write_domain);
+int i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
+ bool interruptible);
int i915_gem_init_ringbuffer(struct drm_device *dev);
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj);
-static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
- bool pipelined);
+static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
struct drm_i915_gem_object *obj_priv;
int ret = 0;
+ if (args->size == 0)
+ return 0;
+
+ if (!access_ok(VERIFY_WRITE,
+ (char __user *)(uintptr_t)args->data_ptr,
+ args->size))
+ return -EFAULT;
+
+ ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
+ args->size);
+ if (ret)
+ return -EFAULT;
+
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
goto out;
}
- if (args->size == 0)
- goto out;
-
- if (!access_ok(VERIFY_WRITE,
- (char __user *)(uintptr_t)args->data_ptr,
- args->size)) {
- ret = -EFAULT;
- goto out;
- }
-
- ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
- args->size);
- if (ret) {
- ret = -EFAULT;
- goto out;
- }
-
ret = i915_gem_object_get_pages_or_evict(obj);
if (ret)
goto out;
struct drm_i915_gem_pwrite *args = data;
struct drm_gem_object *obj;
struct drm_i915_gem_object *obj_priv;
- int ret = 0;
+ int ret;
+
+ if (args->size == 0)
+ return 0;
+
+ if (!access_ok(VERIFY_READ,
+ (char __user *)(uintptr_t)args->data_ptr,
+ args->size))
+ return -EFAULT;
+
+ ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
+ args->size);
+ if (ret)
+ return -EFAULT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
}
obj_priv = to_intel_bo(obj);
-
/* Bounds check destination. */
if (args->offset > obj->size || args->size > obj->size - args->offset) {
ret = -EINVAL;
goto out;
}
- if (args->size == 0)
- goto out;
-
- if (!access_ok(VERIFY_READ,
- (char __user *)(uintptr_t)args->data_ptr,
- args->size)) {
- ret = -EFAULT;
- goto out;
- }
-
- ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
- args->size);
- if (ret) {
- ret = -EFAULT;
- goto out;
- }
-
/* We can only do the GTT pwrite on untiled buffers, as otherwise
* it would end up going through the fenced access, and we'll get
* different detiling behavior between reading and writing.
if (reg->gpu) {
int ret;
- ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
/** Flushes any GPU write domain for the object if it's dirty. */
static int
-i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
- bool pipelined)
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
uint32_t old_write_domain;
obj->read_domains,
old_write_domain);
- if (pipelined)
- return 0;
-
- return i915_gem_object_wait_rendering(obj, true);
+ return 0;
}
/** Flushes the GTT write domain for the object if it's dirty. */
if (obj_priv->gtt_space == NULL)
return -EINVAL;
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
i915_gem_object_flush_cpu_write_domain(obj);
- if (write) {
- ret = i915_gem_object_wait_rendering(obj, true);
- if (ret)
- return ret;
- }
-
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
if (obj_priv->gtt_space == NULL)
return -EINVAL;
- ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
return 0;
}
+int
+i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
+ bool interruptible)
+{
+ if (!obj->active)
+ return 0;
+
+ if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
+ i915_gem_flush_ring(obj->base.dev, NULL, obj->ring,
+ 0, obj->base.write_domain);
+
+ return i915_gem_object_wait_rendering(&obj->base, interruptible);
+}
+
/**
* Moves a single object to the CPU read, and possibly write domain.
*
uint32_t old_write_domain, old_read_domains;
int ret;
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
i915_gem_object_flush_gtt_write_domain(obj);
*/
i915_gem_object_set_to_full_cpu_read_domain(obj);
- if (write) {
- ret = i915_gem_object_wait_rendering(obj, true);
- if (ret)
- return ret;
- }
-
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
if (offset == 0 && size == obj->size)
return i915_gem_object_set_to_cpu_domain(obj, 0);
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
+
i915_gem_object_flush_gtt_write_domain(obj);
/* If we're already fully in the CPU read domain, we're done. */
return 0;
}
-/**
- * Pin an object to the GTT and evaluate the relocations landing in it.
- */
static int
-i915_gem_execbuffer_relocate(struct drm_i915_gem_object *obj,
- struct drm_file *file_priv,
- struct drm_i915_gem_exec_object2 *entry)
+i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry,
+ struct drm_i915_gem_relocation_entry *reloc)
{
struct drm_device *dev = obj->base.dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_relocation_entry __user *user_relocs;
- struct drm_gem_object *target_obj = NULL;
- uint32_t target_handle = 0;
- int i, ret = 0;
+ struct drm_gem_object *target_obj;
+ uint32_t target_offset;
+ int ret = -EINVAL;
- user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
- for (i = 0; i < entry->relocation_count; i++) {
- struct drm_i915_gem_relocation_entry reloc;
- uint32_t target_offset;
+ target_obj = drm_gem_object_lookup(dev, file_priv,
+ reloc->target_handle);
+ if (target_obj == NULL)
+ return -ENOENT;
- if (__copy_from_user_inatomic(&reloc,
- user_relocs+i,
- sizeof(reloc))) {
- ret = -EFAULT;
- break;
- }
+ target_offset = to_intel_bo(target_obj)->gtt_offset;
- if (reloc.target_handle != target_handle) {
- drm_gem_object_unreference(target_obj);
+#if WATCH_RELOC
+ DRM_INFO("%s: obj %p offset %08x target %d "
+ "read %08x write %08x gtt %08x "
+ "presumed %08x delta %08x\n",
+ __func__,
+ obj,
+ (int) reloc->offset,
+ (int) reloc->target_handle,
+ (int) reloc->read_domains,
+ (int) reloc->write_domain,
+ (int) target_offset,
+ (int) reloc->presumed_offset,
+ reloc->delta);
+#endif
- target_obj = drm_gem_object_lookup(dev, file_priv,
- reloc.target_handle);
- if (target_obj == NULL) {
- ret = -ENOENT;
- break;
- }
+ /* The target buffer should have appeared before us in the
+ * exec_object list, so it should have a GTT space bound by now.
+ */
+ if (target_offset == 0) {
+ DRM_ERROR("No GTT space found for object %d\n",
+ reloc->target_handle);
+ goto err;
+ }
- target_handle = reloc.target_handle;
- }
- target_offset = to_intel_bo(target_obj)->gtt_offset;
+ /* Validate that the target is in a valid r/w GPU domain */
+ if (reloc->write_domain & (reloc->write_domain - 1)) {
+ DRM_ERROR("reloc with multiple write domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->read_domains,
+ reloc->write_domain);
+ goto err;
+ }
+ if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
+ reloc->read_domains & I915_GEM_DOMAIN_CPU) {
+ DRM_ERROR("reloc with read/write CPU domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->read_domains,
+ reloc->write_domain);
+ goto err;
+ }
+ if (reloc->write_domain && target_obj->pending_write_domain &&
+ reloc->write_domain != target_obj->pending_write_domain) {
+ DRM_ERROR("Write domain conflict: "
+ "obj %p target %d offset %d "
+ "new %08x old %08x\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->write_domain,
+ target_obj->pending_write_domain);
+ goto err;
+ }
-#if WATCH_RELOC
- DRM_INFO("%s: obj %p offset %08x target %d "
- "read %08x write %08x gtt %08x "
- "presumed %08x delta %08x\n",
- __func__,
- obj,
- (int) reloc.offset,
- (int) reloc.target_handle,
- (int) reloc.read_domains,
- (int) reloc.write_domain,
- (int) target_offset,
- (int) reloc.presumed_offset,
- reloc.delta);
-#endif
+ target_obj->pending_read_domains |= reloc->read_domains;
+ target_obj->pending_write_domain |= reloc->write_domain;
- /* The target buffer should have appeared before us in the
- * exec_object list, so it should have a GTT space bound by now.
- */
- if (target_offset == 0) {
- DRM_ERROR("No GTT space found for object %d\n",
- reloc.target_handle);
- ret = -EINVAL;
- break;
- }
+ /* If the relocation already has the right value in it, no
+ * more work needs to be done.
+ */
+ if (target_offset == reloc->presumed_offset)
+ goto out;
- /* Validate that the target is in a valid r/w GPU domain */
- if (reloc.write_domain & (reloc.write_domain - 1)) {
- DRM_ERROR("reloc with multiple write domains: "
- "obj %p target %d offset %d "
- "read %08x write %08x",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.read_domains,
- reloc.write_domain);
- ret = -EINVAL;
- break;
- }
- if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
- reloc.read_domains & I915_GEM_DOMAIN_CPU) {
- DRM_ERROR("reloc with read/write CPU domains: "
- "obj %p target %d offset %d "
- "read %08x write %08x",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.read_domains,
- reloc.write_domain);
- ret = -EINVAL;
- break;
- }
- if (reloc.write_domain && target_obj->pending_write_domain &&
- reloc.write_domain != target_obj->pending_write_domain) {
- DRM_ERROR("Write domain conflict: "
- "obj %p target %d offset %d "
- "new %08x old %08x\n",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.write_domain,
- target_obj->pending_write_domain);
- ret = -EINVAL;
- break;
- }
+ /* Check that the relocation address is valid... */
+ if (reloc->offset > obj->base.size - 4) {
+ DRM_ERROR("Relocation beyond object bounds: "
+ "obj %p target %d offset %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ (int) obj->base.size);
+ goto err;
+ }
+ if (reloc->offset & 3) {
+ DRM_ERROR("Relocation not 4-byte aligned: "
+ "obj %p target %d offset %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset);
+ goto err;
+ }
- target_obj->pending_read_domains |= reloc.read_domains;
- target_obj->pending_write_domain |= reloc.write_domain;
+ /* and points to somewhere within the target object. */
+ if (reloc->delta >= target_obj->size) {
+ DRM_ERROR("Relocation beyond target object bounds: "
+ "obj %p target %d delta %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->delta,
+ (int) target_obj->size);
+ goto err;
+ }
- /* If the relocation already has the right value in it, no
- * more work needs to be done.
- */
- if (target_offset == reloc.presumed_offset)
- continue;
+ reloc->delta += target_offset;
+ if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
+ uint32_t page_offset = reloc->offset & ~PAGE_MASK;
+ char *vaddr;
- /* Check that the relocation address is valid... */
- if (reloc.offset > obj->base.size - 4) {
- DRM_ERROR("Relocation beyond object bounds: "
- "obj %p target %d offset %d size %d.\n",
- obj, reloc.target_handle,
- (int) reloc.offset, (int) obj->base.size);
- ret = -EINVAL;
- break;
- }
- if (reloc.offset & 3) {
- DRM_ERROR("Relocation not 4-byte aligned: "
- "obj %p target %d offset %d.\n",
- obj, reloc.target_handle,
- (int) reloc.offset);
- ret = -EINVAL;
- break;
- }
+ vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
+ *(uint32_t *)(vaddr + page_offset) = reloc->delta;
+ kunmap_atomic(vaddr);
+ } else {
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t __iomem *reloc_entry;
+ void __iomem *reloc_page;
- /* and points to somewhere within the target object. */
- if (reloc.delta >= target_obj->size) {
- DRM_ERROR("Relocation beyond target object bounds: "
- "obj %p target %d delta %d size %d.\n",
- obj, reloc.target_handle,
- (int) reloc.delta, (int) target_obj->size);
- ret = -EINVAL;
- break;
- }
+ ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
+ if (ret)
+ goto err;
- reloc.delta += target_offset;
- if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
- uint32_t page_offset = reloc.offset & ~PAGE_MASK;
- char *vaddr;
+ /* Map the page containing the relocation we're going to perform. */
+ reloc->offset += obj->gtt_offset;
+ reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+ reloc->offset & PAGE_MASK);
+ reloc_entry = (uint32_t __iomem *)
+ (reloc_page + (reloc->offset & ~PAGE_MASK));
+ iowrite32(reloc->delta, reloc_entry);
+ io_mapping_unmap_atomic(reloc_page);
+ }
- vaddr = kmap_atomic(obj->pages[reloc.offset >> PAGE_SHIFT]);
- *(uint32_t *)(vaddr + page_offset) = reloc.delta;
- kunmap_atomic(vaddr);
- } else {
- uint32_t __iomem *reloc_entry;
- void __iomem *reloc_page;
+ /* and update the user's relocation entry */
+ reloc->presumed_offset = target_offset;
- ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
- if (ret)
- break;
+out:
+ ret = 0;
+err:
+ drm_gem_object_unreference(target_obj);
+ return ret;
+}
- /* Map the page containing the relocation we're going to perform. */
- reloc.offset += obj->gtt_offset;
- reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
- reloc.offset & PAGE_MASK);
- reloc_entry = (uint32_t __iomem *)
- (reloc_page + (reloc.offset & ~PAGE_MASK));
- iowrite32(reloc.delta, reloc_entry);
- io_mapping_unmap_atomic(reloc_page);
- }
+static int
+i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry)
+{
+ struct drm_i915_gem_relocation_entry __user *user_relocs;
+ int i, ret;
+
+ user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
+ for (i = 0; i < entry->relocation_count; i++) {
+ struct drm_i915_gem_relocation_entry reloc;
+
+ if (__copy_from_user_inatomic(&reloc,
+ user_relocs+i,
+ sizeof(reloc)))
+ return -EFAULT;
+
+ ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &reloc);
+ if (ret)
+ return ret;
- /* and update the user's relocation entry */
- reloc.presumed_offset = target_offset;
if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
- &reloc.presumed_offset,
- sizeof(reloc.presumed_offset))) {
- ret = -EFAULT;
- break;
- }
+ &reloc.presumed_offset,
+ sizeof(reloc.presumed_offset)))
+ return -EFAULT;
}
- drm_gem_object_unreference(target_obj);
- return ret;
+ return 0;
}
static int
-i915_gem_execbuffer_pin(struct drm_device *dev,
- struct drm_file *file,
- struct drm_gem_object **object_list,
- struct drm_i915_gem_exec_object2 *exec_list,
- int count)
+i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry,
+ struct drm_i915_gem_relocation_entry *relocs)
+{
+ int i, ret;
+
+ for (i = 0; i < entry->relocation_count; i++) {
+ ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &relocs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->base.pending_read_domains = 0;
+ obj->base.pending_write_domain = 0;
+ ret = i915_gem_execbuffer_relocate_object(obj, file,
+ &exec_list[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_reserve(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i, retry;
return 0;
}
+static int
+i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
+{
+ struct drm_i915_gem_relocation_entry *reloc;
+ int i, total, ret;
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->in_execbuffer = false;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+
+ total = 0;
+ for (i = 0; i < count; i++)
+ total += exec_list[i].relocation_count;
+
+ reloc = drm_malloc_ab(total, sizeof(*reloc));
+ if (reloc == NULL) {
+ mutex_lock(&dev->struct_mutex);
+ return -ENOMEM;
+ }
+
+ total = 0;
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_relocation_entry __user *user_relocs;
+
+ user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
+
+ if (copy_from_user(reloc+total, user_relocs,
+ exec_list[i].relocation_count *
+ sizeof(*reloc))) {
+ ret = -EFAULT;
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+
+ total += exec_list[i].relocation_count;
+ }
+
+ ret = i915_mutex_lock_interruptible(dev);
+ if (ret) {
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+
+ ret = i915_gem_execbuffer_reserve(dev, file,
+ object_list, exec_list,
+ count);
+ if (ret)
+ goto err;
+
+ total = 0;
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->base.pending_read_domains = 0;
+ obj->base.pending_write_domain = 0;
+ ret = i915_gem_execbuffer_relocate_object_slow(obj, file,
+ &exec_list[i],
+ reloc + total);
+ if (ret)
+ goto err;
+
+ total += exec_list[i].relocation_count;
+ }
+
+ /* Leave the user relocations as are, this is the painfully slow path,
+ * and we want to avoid the complication of dropping the lock whilst
+ * having buffers reserved in the aperture and so causing spurious
+ * ENOSPC for random operations.
+ */
+
+err:
+ drm_free_large(reloc);
+ return ret;
+}
+
static int
i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
struct drm_file *file,
for (i = 0; i < count; i++) {
char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
- size_t length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry);
+ int length; /* limited by fault_in_pages_readable() */
+
+ /* First check for malicious input causing overflow */
+ if (exec[i].relocation_count >
+ INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+ return -EINVAL;
+ length = exec[i].relocation_count *
+ sizeof(struct drm_i915_gem_relocation_entry);
if (!access_ok(VERIFY_READ, ptr, length))
return -EFAULT;
}
/* Move the objects en-masse into the GTT, evicting if necessary. */
- ret = i915_gem_execbuffer_pin(dev, file,
- object_list, exec_list,
- args->buffer_count);
+ ret = i915_gem_execbuffer_reserve(dev, file,
+ object_list, exec_list,
+ args->buffer_count);
if (ret)
goto err;
/* The objects are in their final locations, apply the relocations. */
- for (i = 0; i < args->buffer_count; i++) {
- struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
- obj->base.pending_read_domains = 0;
- obj->base.pending_write_domain = 0;
- ret = i915_gem_execbuffer_relocate(obj, file, &exec_list[i]);
+ ret = i915_gem_execbuffer_relocate(dev, file,
+ object_list, exec_list,
+ args->buffer_count);
+ if (ret) {
+ if (ret == -EFAULT) {
+ ret = i915_gem_execbuffer_relocate_slow(dev, file,
+ object_list,
+ exec_list,
+ args->buffer_count);
+ BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+ }
if (ret)
goto err;
}
* use this buffer rather sooner than later, so issuing the required
* flush earlier is beneficial.
*/
- if (obj->write_domain & I915_GEM_GPU_DOMAINS)
+ if (obj->write_domain & I915_GEM_GPU_DOMAINS) {
i915_gem_flush_ring(dev, file_priv,
obj_priv->ring,
0, obj->write_domain);
+ } else if (obj_priv->ring->outstanding_lazy_request) {
+ /* This ring is not being cleared by active usage,
+ * so emit a request to do so.
+ */
+ u32 seqno = i915_add_request(dev,
+ NULL, NULL,
+ obj_priv->ring);
+ if (seqno == 0)
+ ret = -ENOMEM;
+ }
/* Update the active list for the hardware's current position.
* Otherwise this only updates on a delayed timer or when irqs
# define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18)
# define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1)
+#define PCH_3DCGDIS1 0x46024
+# define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11)
+
#define FDI_PLL_FREQ_CTL 0x46030
#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24)
#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00
#define ILK_DISPLAY_CHICKEN2 0x42004
#define ILK_DPARB_GATE (1<<22)
#define ILK_VSDPFD_FULL (1<<21)
+#define ILK_DISPLAY_CHICKEN_FUSES 0x42014
+#define ILK_INTERNAL_GRAPHICS_DISABLE (1<<31)
+#define ILK_INTERNAL_DISPLAY_DISABLE (1<<30)
+#define ILK_DISPLAY_DEBUG_DISABLE (1<<29)
+#define ILK_HDCP_DISABLE (1<<25)
+#define ILK_eDP_A_DISABLE (1<<24)
+#define ILK_DESKTOP (1<<23)
#define ILK_DSPCLK_GATE 0x42020
#define ILK_DPARB_CLK_GATE (1<<5)
/* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */
#define TRANS_DP_10BPC (1<<9)
#define TRANS_DP_6BPC (2<<9)
#define TRANS_DP_12BPC (3<<9)
+#define TRANS_DP_BPC_MASK (3<<9)
#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
#define TRANS_DP_VSYNC_ACTIVE_LOW 0
#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+ /* Cursor state */
+ dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+ dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+ dev_priv->saveCURABASE = I915_READ(CURABASE);
+ dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+ dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+ dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+ if (IS_GEN2(dev))
+ dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
if (HAS_PCH_SPLIT(dev)) {
dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL);
dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL);
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
+ /* Cursor state */
+ I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+ I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+ I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+ I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+ I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+ I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+ if (IS_GEN2(dev))
+ I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
return;
}
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
- /* Cursor state */
- dev_priv->saveCURACNTR = I915_READ(CURACNTR);
- dev_priv->saveCURAPOS = I915_READ(CURAPOS);
- dev_priv->saveCURABASE = I915_READ(CURABASE);
- dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
- dev_priv->saveCURBPOS = I915_READ(CURBPOS);
- dev_priv->saveCURBBASE = I915_READ(CURBBASE);
- if (IS_GEN2(dev))
- dev_priv->saveCURSIZE = I915_READ(CURSIZE);
-
/* CRT state */
if (HAS_PCH_SPLIT(dev)) {
dev_priv->saveADPA = I915_READ(PCH_ADPA);
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
- /* Cursor state */
- I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
- I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
- I915_WRITE(CURABASE, dev_priv->saveCURABASE);
- I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
- I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
- I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
- if (IS_GEN2(dev))
- I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
-
/* CRT state */
if (HAS_PCH_SPLIT(dev))
I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
kfree(output.pointer);
}
-static int intel_dsm_switchto(enum vga_switcheroo_client_id id)
-{
- return 0;
-}
-
-static int intel_dsm_power_state(enum vga_switcheroo_client_id id,
- enum vga_switcheroo_state state)
-{
- return 0;
-}
-
-static int intel_dsm_init(void)
-{
- return 0;
-}
-
-static int intel_dsm_get_client_id(struct pci_dev *pdev)
-{
- if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
- return VGA_SWITCHEROO_IGD;
- else
- return VGA_SWITCHEROO_DIS;
-}
-
-static struct vga_switcheroo_handler intel_dsm_handler = {
- .switchto = intel_dsm_switchto,
- .power_state = intel_dsm_power_state,
- .init = intel_dsm_init,
- .get_client_id = intel_dsm_get_client_id,
-};
-
static bool intel_dsm_pci_probe(struct pci_dev *pdev)
{
acpi_handle dhandle, intel_handle;
{
if (!intel_dsm_detect())
return;
-
- vga_switcheroo_register_handler(&intel_dsm_handler);
}
void intel_unregister_dsm_handler(void)
{
- vga_switcheroo_unregister_handler();
}
#include "i915_drm.h"
#include "i915_drv.h"
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
+ ADPA_CRT_HOTPLUG_WARMUP_10MS | \
+ ADPA_CRT_HOTPLUG_SAMPLE_4S | \
+ ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
+ ADPA_CRT_HOTPLUG_VOLREF_325MV | \
+ ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+ struct intel_encoder base;
+ bool force_hotplug_required;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+ return container_of(intel_attached_encoder(connector),
+ struct intel_crt, base);
+}
+
static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
}
- adpa = 0;
+ adpa = ADPA_HOTPLUG_BITS;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
adpa |= ADPA_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 adpa, temp;
+ u32 adpa;
bool ret;
- bool turn_off_dac = false;
- temp = adpa = I915_READ(PCH_ADPA);
+ /* The first time through, trigger an explicit detection cycle */
+ if (crt->force_hotplug_required) {
+ bool turn_off_dac = HAS_PCH_SPLIT(dev);
+ u32 save_adpa;
- if (HAS_PCH_SPLIT(dev))
- turn_off_dac = true;
-
- adpa &= ~ADPA_CRT_HOTPLUG_MASK;
- if (turn_off_dac)
- adpa &= ~ADPA_DAC_ENABLE;
-
- /* disable HPD first */
- I915_WRITE(PCH_ADPA, adpa);
- (void)I915_READ(PCH_ADPA);
-
- adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
- ADPA_CRT_HOTPLUG_WARMUP_10MS |
- ADPA_CRT_HOTPLUG_SAMPLE_4S |
- ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
- ADPA_CRT_HOTPLUG_VOLREF_325MV |
- ADPA_CRT_HOTPLUG_ENABLE |
- ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
-
- DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
- I915_WRITE(PCH_ADPA, adpa);
-
- if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
- 1000))
- DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
-
- if (turn_off_dac) {
- /* Make sure hotplug is enabled */
- I915_WRITE(PCH_ADPA, temp | ADPA_CRT_HOTPLUG_ENABLE);
- (void)I915_READ(PCH_ADPA);
+ crt->force_hotplug_required = 0;
+
+ save_adpa = adpa = I915_READ(PCH_ADPA);
+ DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+ adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+ if (turn_off_dac)
+ adpa &= ~ADPA_DAC_ENABLE;
+
+ I915_WRITE(PCH_ADPA, adpa);
+
+ if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+ 1000))
+ DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+ if (turn_off_dac) {
+ I915_WRITE(PCH_ADPA, save_adpa);
+ POSTING_READ(PCH_ADPA);
+ }
}
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(PCH_ADPA);
- adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
- if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
- (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+ if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
ret = true;
else
ret = false;
+ DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
return ret;
}
return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
}
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_detect_ddc(struct intel_crt *crt)
{
- struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
- struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+ struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
/* CRT should always be at 0, but check anyway */
- if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+ if (crt->base.type != INTEL_OUTPUT_ANALOG)
return false;
if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
return true;
}
- if (intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin)) {
+ if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
return true;
}
}
static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
{
- struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_encoder *encoder = &crt->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
- struct intel_encoder *encoder = intel_attached_encoder(connector);
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_crtc *crtc;
int dpms_mode;
enum drm_connector_status status;
if (intel_crt_detect_hotplug(connector)) {
DRM_DEBUG_KMS("CRT detected via hotplug\n");
return connector_status_connected;
- } else
+ } else {
+ DRM_DEBUG_KMS("CRT not detected via hotplug\n");
return connector_status_disconnected;
+ }
}
- if (intel_crt_detect_ddc(&encoder->base))
+ if (intel_crt_detect_ddc(crt))
return connector_status_connected;
if (!force)
return connector->status;
/* for pre-945g platforms use load detect */
- if (encoder->base.crtc && encoder->base.crtc->enabled) {
- status = intel_crt_load_detect(encoder->base.crtc, encoder);
+ crtc = crt->base.base.crtc;
+ if (crtc && crtc->enabled) {
+ status = intel_crt_load_detect(crtc, crt);
} else {
- crtc = intel_get_load_detect_pipe(encoder, connector,
+ crtc = intel_get_load_detect_pipe(&crt->base, connector,
NULL, &dpms_mode);
if (crtc) {
- if (intel_crt_detect_ddc(&encoder->base))
+ if (intel_crt_detect_ddc(crt))
status = connector_status_connected;
else
- status = intel_crt_load_detect(crtc, encoder);
- intel_release_load_detect_pipe(encoder,
+ status = intel_crt_load_detect(crtc, crt);
+ intel_release_load_detect_pipe(&crt->base,
connector, dpms_mode);
} else
status = connector_status_unknown;
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_encoder *intel_encoder;
+ struct intel_crt *crt;
struct intel_connector *intel_connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
- if (!intel_encoder)
+ crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+ if (!crt)
return;
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
- kfree(intel_encoder);
+ kfree(crt);
return;
}
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
- drm_encoder_init(dev, &intel_encoder->base, &intel_crt_enc_funcs,
+ drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- intel_connector_attach_encoder(intel_connector, intel_encoder);
+ intel_connector_attach_encoder(intel_connector, &crt->base);
- intel_encoder->type = INTEL_OUTPUT_ANALOG;
- intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT) |
- (1 << INTEL_SDVO_LVDS_CLONE_BIT);
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ crt->base.type = INTEL_OUTPUT_ANALOG;
+ crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+ 1 << INTEL_ANALOG_CLONE_BIT |
+ 1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ crt->base.crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
- drm_encoder_helper_add(&intel_encoder->base, &intel_crt_helper_funcs);
+ drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
else
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ /*
+ * Configure the automatic hotplug detection stuff
+ */
+ crt->force_hotplug_required = 0;
+ if (HAS_PCH_SPLIT(dev)) {
+ u32 adpa;
+
+ adpa = I915_READ(PCH_ADPA);
+ adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+ adpa |= ADPA_HOTPLUG_BITS;
+ I915_WRITE(PCH_ADPA, adpa);
+ POSTING_READ(PCH_ADPA);
+
+ DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+ crt->force_hotplug_required = 1;
+ }
+
dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
}
wait_event(dev_priv->pending_flip_queue,
atomic_read(&obj_priv->pending_flip) == 0);
+
+ /* Big Hammer, we also need to ensure that any pending
+ * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+ * current scanout is retired before unpinning the old
+ * framebuffer.
+ */
+ ret = i915_gem_object_flush_gpu(obj_priv, false);
+ if (ret) {
+ i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
}
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK);
+ TRANS_DP_SYNC_MASK |
+ TRANS_DP_BPC_MASK);
temp |= (TRANS_DP_OUTPUT_ENABLE |
TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_8BPC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
}
}
-#define DATA_N 0x800000
-#define LINK_N 0x80000
-
static void
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
int link_clock, struct fdi_m_n *m_n)
{
- u64 temp;
-
m_n->tu = 64; /* default size */
- temp = (u64) DATA_N * pixel_clock;
- temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
- m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
- m_n->gmch_n = DATA_N;
+ /* BUG_ON(pixel_clock > INT_MAX / 36); */
+ m_n->gmch_m = bits_per_pixel * pixel_clock;
+ m_n->gmch_n = link_clock * nlanes * 8;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- temp = (u64) LINK_N * pixel_clock;
- m_n->link_m = div_u64(temp, link_clock);
- m_n->link_n = LINK_N;
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
}
/* FDI link */
if (HAS_PCH_SPLIT(dev)) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int lane = 0, link_bw, bpp;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
intel_crtc->fdi_lanes = lane;
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
}
.page_flip = intel_crtc_page_flip,
};
+static void intel_sanitize_modesetting(struct drm_device *dev,
+ int pipe, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg, val;
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ /* Who knows what state these registers were left in by the BIOS or
+ * grub?
+ *
+ * If we leave the registers in a conflicting state (e.g. with the
+ * display plane reading from the other pipe than the one we intend
+ * to use) then when we attempt to teardown the active mode, we will
+ * not disable the pipes and planes in the correct order -- leaving
+ * a plane reading from a disabled pipe and possibly leading to
+ * undefined behaviour.
+ */
+
+ reg = DSPCNTR(plane);
+ val = I915_READ(reg);
+
+ if ((val & DISPLAY_PLANE_ENABLE) == 0)
+ return;
+ if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+ return;
+
+ /* This display plane is active and attached to the other CPU pipe. */
+ pipe = !pipe;
+
+ /* Disable the plane and wait for it to stop reading from the pipe. */
+ I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+ intel_flush_display_plane(dev, plane);
+
+ if (IS_GEN2(dev))
+ intel_wait_for_vblank(dev, pipe);
+
+ if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ /* Switch off the pipe. */
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ if (val & PIPECONF_ENABLE) {
+ I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+ intel_wait_for_pipe_off(dev, pipe);
+ }
+}
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
(unsigned long)intel_crtc);
+
+ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
return index_mask;
}
+static bool has_edp_a(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (!IS_MOBILE(dev))
+ return false;
+
+ if ((I915_READ(DP_A) & DP_DETECTED) == 0)
+ return false;
+
+ if (IS_GEN5(dev) &&
+ (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
+ return false;
+
+ return true;
+}
+
static void intel_setup_outputs(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
bool dpd_is_edp = false;
+ bool has_lvds = false;
if (IS_MOBILE(dev) && !IS_I830(dev))
- intel_lvds_init(dev);
+ has_lvds = intel_lvds_init(dev);
+ if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
+ /* disable the panel fitter on everything but LVDS */
+ I915_WRITE(PFIT_CONTROL, 0);
+ }
if (HAS_PCH_SPLIT(dev)) {
dpd_is_edp = intel_dpd_is_edp(dev);
- if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+ if (has_edp_a(dev))
intel_dp_init(dev, DP_A);
if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
I915_WRITE(PCH_3DCGDIS0,
MARIUNIT_CLOCK_GATE_DISABLE |
SVSMUNIT_CLOCK_GATE_DISABLE);
+ I915_WRITE(PCH_3DCGDIS1,
+ VFMUNIT_CLOCK_GATE_DISABLE);
}
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
uint16_t address = algo_data->address;
uint8_t msg[5];
uint8_t reply[2];
+ unsigned retry;
int msg_bytes;
int reply_bytes;
int ret;
break;
}
- for (;;) {
- ret = intel_dp_aux_ch(intel_dp,
- msg, msg_bytes,
- reply, reply_bytes);
+ for (retry = 0; retry < 5; retry++) {
+ ret = intel_dp_aux_ch(intel_dp,
+ msg, msg_bytes,
+ reply, reply_bytes);
if (ret < 0) {
DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
return ret;
}
+
+ switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
+ case AUX_NATIVE_REPLY_ACK:
+ /* I2C-over-AUX Reply field is only valid
+ * when paired with AUX ACK.
+ */
+ break;
+ case AUX_NATIVE_REPLY_NACK:
+ DRM_DEBUG_KMS("aux_ch native nack\n");
+ return -EREMOTEIO;
+ case AUX_NATIVE_REPLY_DEFER:
+ udelay(100);
+ continue;
+ default:
+ DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
+ reply[0]);
+ return -EREMOTEIO;
+ }
+
switch (reply[0] & AUX_I2C_REPLY_MASK) {
case AUX_I2C_REPLY_ACK:
if (mode == MODE_I2C_READ) {
}
return reply_bytes - 1;
case AUX_I2C_REPLY_NACK:
- DRM_DEBUG_KMS("aux_ch nack\n");
+ DRM_DEBUG_KMS("aux_i2c nack\n");
return -EREMOTEIO;
case AUX_I2C_REPLY_DEFER:
- DRM_DEBUG_KMS("aux_ch defer\n");
+ DRM_DEBUG_KMS("aux_i2c defer\n");
udelay(100);
break;
default:
- DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
+ DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
return -EREMOTEIO;
}
}
+
+ DRM_ERROR("too many retries, giving up\n");
+ return -EREMOTEIO;
}
static int
mode->clock = dev_priv->panel_fixed_mode->clock;
}
- /* Just use VBT values for eDP */
- if (is_edp(intel_dp)) {
- intel_dp->lane_count = dev_priv->edp.lanes;
- intel_dp->link_bw = dev_priv->edp.rate;
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
- DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n",
- intel_dp->link_bw, intel_dp->lane_count,
- adjusted_mode->clock);
- return true;
- }
-
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
}
}
+ if (is_edp(intel_dp)) {
+ /* okay we failed just pick the highest */
+ intel_dp->lane_count = max_lane_count;
+ intel_dp->link_bw = bws[max_clock];
+ adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+ DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+ "count %d clock %d\n",
+ intel_dp->link_bw, intel_dp->lane_count,
+ adjusted_mode->clock);
+
+ return true;
+ }
+
return false;
}
}
static uint32_t
-intel_dp_signal_levels(struct intel_dp *intel_dp)
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t signal_levels = 0;
- u8 train_set = intel_dp->train_set[0];
- u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK;
- u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK;
+ uint32_t signal_levels = 0;
- if (is_edp(intel_dp)) {
- vswing = dev_priv->edp.vswing;
- preemphasis = dev_priv->edp.preemphasis;
- }
-
- switch (vswing) {
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_400:
default:
signal_levels |= DP_VOLTAGE_0_4;
signal_levels |= DP_VOLTAGE_1_2;
break;
}
- switch (preemphasis) {
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPHASIS_0:
default:
signal_levels |= DP_PRE_EMPHASIS_0;
return true;
}
-static bool
-intel_dp_aux_handshake_required(struct intel_dp *intel_dp)
-{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (is_edp(intel_dp) && dev_priv->no_aux_handshake)
- return false;
-
- return true;
-}
-
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
I915_WRITE(intel_dp->output_reg, dp_reg_value);
POSTING_READ(intel_dp->output_reg);
- if (!intel_dp_aux_handshake_required(intel_dp))
- return true;
-
intel_dp_aux_native_write_1(intel_dp,
DP_TRAINING_PATTERN_SET,
dp_train_pat);
POSTING_READ(intel_dp->output_reg);
intel_wait_for_vblank(dev, intel_crtc->pipe);
- if (intel_dp_aux_handshake_required(intel_dp))
- /* Write the link configuration data */
- intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
- intel_dp->link_configuration,
- DP_LINK_CONFIGURATION_SIZE);
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
+ intel_dp->link_configuration,
+ DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
- signal_levels = intel_dp_signal_levels(intel_dp);
+ signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
break;
/* Set training pattern 1 */
- udelay(500);
- if (intel_dp_aux_handshake_required(intel_dp)) {
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_dp))
break;
- } else {
- if (!intel_dp_get_link_status(intel_dp))
- break;
- if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
- clock_recovery = true;
- break;
- }
+ if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+ clock_recovery = true;
+ break;
+ }
- /* Check to see if we've tried the max voltage */
- for (i = 0; i < intel_dp->lane_count; i++)
- if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
- break;
- if (i == intel_dp->lane_count)
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < intel_dp->lane_count; i++)
+ if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
+ if (i == intel_dp->lane_count)
+ break;
- /* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
- ++tries;
- if (tries == 5)
- break;
- } else
- tries = 0;
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
+ break;
+ } else
+ tries = 0;
+ voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
- /* Compute new intel_dp->train_set as requested by target */
- intel_get_adjust_train(intel_dp);
- }
+ /* Compute new intel_dp->train_set as requested by target */
+ intel_get_adjust_train(intel_dp);
}
intel_dp->DP = DP;
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
- signal_levels = intel_dp_signal_levels(intel_dp);
+ signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
DP_TRAINING_PATTERN_2))
break;
- udelay(500);
-
- if (!intel_dp_aux_handshake_required(intel_dp)) {
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_dp))
break;
- } else {
- if (!intel_dp_get_link_status(intel_dp))
- break;
- if (intel_channel_eq_ok(intel_dp)) {
- channel_eq = true;
- break;
- }
+ if (intel_channel_eq_ok(intel_dp)) {
+ channel_eq = true;
+ break;
+ }
- /* Try 5 times */
- if (tries > 5)
- break;
+ /* Try 5 times */
+ if (tries > 5)
+ break;
- /* Compute new intel_dp->train_set as requested by target */
- intel_get_adjust_train(intel_dp);
- ++tries;
- }
+ /* Compute new intel_dp->train_set as requested by target */
+ intel_get_adjust_train(intel_dp);
+ ++tries;
}
+
if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_OFF_CPT;
else
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t DP = intel_dp->DP;
+ if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+ return;
+
DRM_DEBUG_KMS("\n");
if (is_edp(intel_dp)) {
if (is_edp(intel_dp))
DP |= DP_LINK_TRAIN_OFF;
+
+ if (!HAS_PCH_CPT(dev) &&
+ I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+ /* Hardware workaround: leaving our transcoder select
+ * set to transcoder B while it's off will prevent the
+ * corresponding HDMI output on transcoder A.
+ *
+ * Combine this with another hardware workaround:
+ * transcoder select bit can only be cleared while the
+ * port is enabled.
+ */
+ DP &= ~DP_PIPEB_SELECT;
+ I915_WRITE(intel_dp->output_reg, DP);
+
+ /* Changes to enable or select take place the vblank
+ * after being written.
+ */
+ intel_wait_for_vblank(intel_dp->base.base.dev,
+ intel_crtc->pipe);
+ }
+
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
}
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj);
-extern void intel_lvds_init(struct drm_device *dev);
+extern bool intel_lvds_init(struct drm_device *dev);
extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
};
struct intel_gpio *gpio;
- if (pin < 1 || pin > 7)
+ if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
return NULL;
gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL);
gpio->reg += PCH_GPIOA - GPIOA;
gpio->dev_priv = dev_priv;
- snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO%c", "?BACDEF?"[pin]);
+ snprintf(gpio->adapter.name, sizeof(gpio->adapter.name),
+ "i915 GPIO%c", "?BACDE?F"[pin]);
gpio->adapter.owner = THIS_MODULE;
gpio->adapter.algo_data = &gpio->algo;
gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
"panel",
"dpc",
"dpb",
- "reserved"
+ "reserved",
"dpd",
};
struct drm_i915_private *dev_priv = dev->dev_private;
bus->adapter.owner = THIS_MODULE;
bus->adapter.class = I2C_CLASS_DDC;
snprintf(bus->adapter.name,
- I2C_NAME_SIZE,
- "gmbus %s",
+ sizeof(bus->adapter.name),
+ "i915 gmbus %s",
names[i]);
bus->adapter.dev.parent = &dev->pdev->dev;
/**
* Sets the power state for the panel.
*/
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
lvds_reg = LVDS;
}
- if (on) {
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
- } else {
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
- intel_panel_set_backlight(dev, 0);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- if (intel_lvds->pfit_control) {
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(PFIT_CONTROL, 0);
- intel_lvds->pfit_control = 0;
+ if (intel_lvds->pfit_dirty) {
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ intel_lvds->pfit_control,
+ intel_lvds->pfit_pgm_ratios);
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+ DRM_ERROR("timed out waiting for panel to power off\n");
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
+ }
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+ POSTING_READ(lvds_reg);
+
+ intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
+
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+ struct drm_device *dev = intel_lvds->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 ctl_reg, lvds_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ ctl_reg = PCH_PP_CONTROL;
+ lvds_reg = PCH_LVDS;
+ } else {
+ ctl_reg = PP_CONTROL;
+ lvds_reg = LVDS;
+ }
+
+ dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ intel_panel_set_backlight(dev, 0);
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+ if (intel_lvds->pfit_control) {
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+ DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+ I915_WRITE(PFIT_CONTROL, 0);
+ intel_lvds->pfit_dirty = true;
}
+
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
POSTING_READ(lvds_reg);
}
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
if (mode == DRM_MODE_DPMS_ON)
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
else
- intel_lvds_set_power(intel_lvds, false);
+ intel_lvds_disable(intel_lvds);
/* XXX: We never power down the LVDS pairs. */
}
/* Always do a full power on as we do not know what state
* we were left in.
*/
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!intel_lvds->pfit_dirty)
- return;
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
- intel_lvds->pfit_control,
- intel_lvds->pfit_pgm_ratios);
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
-
- I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
- I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
- intel_lvds->pfit_dirty = false;
}
/**
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
-void intel_lvds_init(struct drm_device *dev)
+bool intel_lvds_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds;
/* Skip init on machines we know falsely report LVDS */
if (dmi_check_system(intel_no_lvds))
- return;
+ return false;
pin = GMBUS_PORT_PANEL;
if (!lvds_is_present_in_vbt(dev, &pin)) {
DRM_DEBUG_KMS("LVDS is not present in VBT\n");
- return;
+ return false;
}
if (HAS_PCH_SPLIT(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
- return;
+ return false;
if (dev_priv->edp.support) {
DRM_DEBUG_KMS("disable LVDS for eDP support\n");
- return;
+ return false;
}
}
if (!intel_lvds_ddc_probe(dev, pin)) {
DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n");
- return;
+ return false;
}
intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
if (!intel_lvds) {
- return;
+ return false;
}
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_lvds);
- return;
+ return false;
}
if (!HAS_PCH_SPLIT(dev)) {
/* keep the LVDS connector */
dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
- return;
+ return true;
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
drm_encoder_cleanup(encoder);
kfree(intel_lvds);
kfree(intel_connector);
+ return false;
}
/* G45 ring initialization fails to reset head to zero */
if (head != 0) {
- DRM_ERROR("%s head not reset to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ DRM_DEBUG_KMS("%s head not reset to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
I915_WRITE_HEAD(ring, 0);
- DRM_ERROR("%s head forced to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+ DRM_ERROR("failed to set %s head to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
+ }
}
I915_WRITE_CTL(ring,
drm_i915_private_t *dev_priv = dev->dev_private;
u32 head;
- head = intel_read_status_page(ring, 4);
- if (head) {
- ring->head = head & HEAD_ADDR;
- ring->space = ring->head - (ring->tail + 8);
- if (ring->space < 0)
- ring->space += ring->size;
- if (ring->space >= n)
- return 0;
- }
-
trace_i915_ring_wait_begin (dev);
end = jiffies + 3 * HZ;
do {
- ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
+ /* If the reported head position has wrapped or hasn't advanced,
+ * fallback to the slow and accurate path.
+ */
+ head = intel_read_status_page(ring, 4);
+ if (head < ring->actual_head)
+ head = I915_READ_HEAD(ring);
+ ring->actual_head = head;
+ ring->head = head & HEAD_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->size;
struct drm_device *dev;
struct drm_gem_object *gem_object;
- unsigned int head;
- unsigned int tail;
+ u32 actual_head;
+ u32 head;
+ u32 tail;
int space;
struct intel_hw_status_page status_page;
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
- bool has_audio;
+ bool has_hdmi_monitor;
+ bool has_hdmi_audio;
/**
* This is set if we detect output of sdvo device as LVDS and
if (!intel_sdvo_set_target_input(intel_sdvo))
return;
- if (intel_sdvo->is_hdmi &&
+ if (intel_sdvo->has_hdmi_monitor &&
!intel_sdvo_set_avi_infoframe(intel_sdvo))
return;
}
if (intel_crtc->pipe == 1)
sdvox |= SDVO_PIPE_B_SELECT;
- if (intel_sdvo->has_audio)
+ if (intel_sdvo->has_hdmi_audio)
sdvox |= SDVO_AUDIO_ENABLE;
if (INTEL_INFO(dev)->gen >= 4) {
return drm_get_edid(connector, &sdvo->ddc);
}
-static struct drm_connector *
-intel_find_analog_connector(struct drm_device *dev)
-{
- struct drm_connector *connector;
- struct intel_sdvo *encoder;
-
- list_for_each_entry(encoder,
- &dev->mode_config.encoder_list,
- base.base.head) {
- if (encoder->base.type == INTEL_OUTPUT_ANALOG) {
- list_for_each_entry(connector,
- &dev->mode_config.connector_list,
- head) {
- if (&encoder->base ==
- intel_attached_encoder(connector))
- return connector;
- }
- }
- }
-
- return NULL;
-}
-
-static int
-intel_analog_is_connected(struct drm_device *dev)
-{
- struct drm_connector *analog_connector;
-
- analog_connector = intel_find_analog_connector(dev);
- if (!analog_connector)
- return false;
-
- if (analog_connector->funcs->detect(analog_connector, false) ==
- connector_status_disconnected)
- return false;
-
- return true;
-}
-
/* Mac mini hack -- use the same DDC as the analog connector */
static struct edid *
intel_sdvo_get_analog_edid(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- if (!intel_analog_is_connected(connector->dev))
- return NULL;
-
- return drm_get_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ return drm_get_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
}
enum drm_connector_status
/* DDC bus is shared, match EDID to connector type */
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
- intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid);
- intel_sdvo->has_audio = drm_detect_monitor_audio(edid);
+ if (intel_sdvo->is_hdmi) {
+ intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid);
+ intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid);
+ }
}
connector->display_info.raw_edid = NULL;
kfree(edid);
if (status == connector_status_connected) {
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
if (intel_sdvo_connector->force_audio)
- intel_sdvo->has_audio = intel_sdvo_connector->force_audio > 0;
+ intel_sdvo->has_hdmi_audio = intel_sdvo_connector->force_audio > 0;
}
return status;
if (!intel_sdvo_write_cmd(intel_sdvo,
SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
return connector_status_unknown;
- if (intel_sdvo->is_tv) {
- /* add 30ms delay when the output type is SDVO-TV */
+
+ /* add 30ms delay when the output type might be TV */
+ if (intel_sdvo->caps.output_flags &
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0))
mdelay(30);
- }
+
if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
return connector_status_unknown;
edid = intel_sdvo_get_analog_edid(connector);
if (edid != NULL) {
- drm_mode_connector_update_edid_property(connector, edid);
- drm_add_edid_modes(connector, edid);
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ drm_mode_connector_update_edid_property(connector, edid);
+ drm_add_edid_modes(connector, edid);
+ }
connector->display_info.raw_edid = NULL;
kfree(edid);
}
intel_sdvo_connector->force_audio = val;
- if (val > 0 && intel_sdvo->has_audio)
+ if (val > 0 && intel_sdvo->has_hdmi_audio)
return 0;
- if (val < 0 && !intel_sdvo->has_audio)
+ if (val < 0 && !intel_sdvo->has_hdmi_audio)
return 0;
- intel_sdvo->has_audio = val > 0;
+ intel_sdvo->has_hdmi_audio = val > 0;
goto done;
}
speed = mapping->i2c_speed;
}
- sdvo->i2c = &dev_priv->gmbus[pin].adapter;
- intel_gmbus_set_speed(sdvo->i2c, speed);
- intel_gmbus_force_bit(sdvo->i2c, true);
+ if (pin < GMBUS_NUM_PORTS) {
+ sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+ intel_gmbus_set_speed(sdvo->i2c, speed);
+ intel_gmbus_force_bit(sdvo->i2c, true);
+ } else
+ sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
}
static bool
intel_sdvo_set_colorimetry(intel_sdvo,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+
intel_sdvo->is_hdmi = true;
}
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT));
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
-
- intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
+ if (intel_sdvo->is_hdmi)
+ intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
return true;
}
*/
#include <linux/backlight.h>
+#include <linux/acpi.h>
#include "drmP.h"
#include "nouveau_drv.h"
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
+#ifdef CONFIG_ACPI
+ if (acpi_video_backlight_support()) {
+ NV_INFO(dev, "ACPI backlight interface available, "
+ "not registering our own\n");
+ return 0;
+ }
+#endif
+
switch (dev_priv->card_type) {
case NV_40:
return nouveau_nv40_backlight_init(dev);
struct drm_nouveau_private *dev_priv = dev->dev_private;
unsigned htotal;
- if (dev_priv->chipset >= NV_50) {
+ if (dev_priv->card_type >= NV_50) {
if (NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
NVReadVgaCrtc(dev, 0, 0x1a) == 0)
return false;
nvbo->no_vm = no_vm;
nvbo->tile_mode = tile_mode;
nvbo->tile_flags = tile_flags;
+ nvbo->bo.bdev = &dev_priv->ttm.bdev;
- nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size);
+ nouveau_bo_fixup_align(dev, tile_mode, nouveau_bo_tile_layout(nvbo),
+ &align, &size);
align >>= PAGE_SHIFT;
nouveau_bo_placement_set(nvbo, flags, 0);
pl[(*n)++] = TTM_PL_FLAG_SYSTEM | flags;
}
+static void
+set_placement_range(struct nouveau_bo *nvbo, uint32_t type)
+{
+ struct drm_nouveau_private *dev_priv = nouveau_bdev(nvbo->bo.bdev);
+
+ if (dev_priv->card_type == NV_10 &&
+ nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM)) {
+ /*
+ * Make sure that the color and depth buffers are handled
+ * by independent memory controller units. Up to a 9x
+ * speed up when alpha-blending and depth-test are enabled
+ * at the same time.
+ */
+ int vram_pages = dev_priv->vram_size >> PAGE_SHIFT;
+
+ if (nvbo->tile_flags & NOUVEAU_GEM_TILE_ZETA) {
+ nvbo->placement.fpfn = vram_pages / 2;
+ nvbo->placement.lpfn = ~0;
+ } else {
+ nvbo->placement.fpfn = 0;
+ nvbo->placement.lpfn = vram_pages / 2;
+ }
+ }
+}
+
void
nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t type, uint32_t busy)
{
pl->busy_placement = nvbo->busy_placements;
set_placement_list(nvbo->busy_placements, &pl->num_busy_placement,
type | busy, flags);
+
+ set_placement_range(nvbo, type);
}
int
stride = 16 * 4;
height = amount / stride;
- if (new_mem->mem_type == TTM_PL_VRAM && nvbo->tile_flags) {
+ if (new_mem->mem_type == TTM_PL_VRAM &&
+ nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
return ret;
BEGIN_RING(chan, NvSubM2MF, 0x0200, 1);
OUT_RING (chan, 1);
}
- if (old_mem->mem_type == TTM_PL_VRAM && nvbo->tile_flags) {
+ if (old_mem->mem_type == TTM_PL_VRAM &&
+ nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
return ret;
if (dev_priv->card_type == NV_50) {
ret = nv50_mem_vm_bind_linear(dev,
offset + dev_priv->vm_vram_base,
- new_mem->size, nvbo->tile_flags,
+ new_mem->size,
+ nouveau_bo_tile_layout(nvbo),
offset);
if (ret)
return ret;
* nothing to do here.
*/
if (bo->mem.mem_type != TTM_PL_VRAM) {
- if (dev_priv->card_type < NV_50 || !nvbo->tile_flags)
+ if (dev_priv->card_type < NV_50 ||
+ !nouveau_bo_tile_layout(nvbo))
return 0;
}
nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
if (!nv_encoder && !nouveau_tv_disable)
nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
- if (nv_encoder) {
+ if (nv_encoder && force) {
struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
struct drm_encoder_helper_funcs *helper =
encoder->helper_private;
return ret;
}
+static unsigned
+get_tmds_link_bandwidth(struct drm_connector *connector)
+{
+ struct nouveau_connector *nv_connector = nouveau_connector(connector);
+ struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
+ struct dcb_entry *dcb = nv_connector->detected_encoder->dcb;
+
+ if (dcb->location != DCB_LOC_ON_CHIP ||
+ dev_priv->chipset >= 0x46)
+ return 165000;
+ else if (dev_priv->chipset >= 0x40)
+ return 155000;
+ else if (dev_priv->chipset >= 0x18)
+ return 135000;
+ else
+ return 112000;
+}
+
static int
nouveau_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
max_clock = 400000;
break;
case OUTPUT_TMDS:
- if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
- !nv_encoder->dcb->duallink_possible)
- max_clock = 165000;
- else
- max_clock = 330000;
+ max_clock = get_tmds_link_bandwidth(connector);
+ if (nouveau_duallink && nv_encoder->dcb->duallink_possible)
+ max_clock *= 2;
break;
case OUTPUT_ANALOG:
max_clock = nv_encoder->dcb->crtconf.maxfreq;
return NULL;
}
-void
-nouveau_connector_set_polling(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
- bool spare_crtc = false;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
- spare_crtc |= !crtc->enabled;
-
- connector->polled = 0;
-
- switch (connector->connector_type) {
- case DRM_MODE_CONNECTOR_VGA:
- case DRM_MODE_CONNECTOR_TV:
- if (dev_priv->card_type >= NV_50 ||
- (nv_gf4_disp_arch(dev) && spare_crtc))
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
- break;
-
- case DRM_MODE_CONNECTOR_DVII:
- case DRM_MODE_CONNECTOR_DVID:
- case DRM_MODE_CONNECTOR_HDMIA:
- case DRM_MODE_CONNECTOR_DisplayPort:
- case DRM_MODE_CONNECTOR_eDP:
- if (dev_priv->card_type >= NV_50)
- connector->polled = DRM_CONNECTOR_POLL_HPD;
- else if (connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
- spare_crtc)
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
- break;
-
- default:
- break;
- }
-}
-
static const struct drm_connector_helper_funcs
nouveau_connector_helper_funcs = {
.get_modes = nouveau_connector_get_modes,
dev->mode_config.scaling_mode_property,
nv_connector->scaling_mode);
}
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT;
/* fall-through */
case DCB_CONNECTOR_TV_0:
case DCB_CONNECTOR_TV_1:
dev->mode_config.dithering_mode_property,
nv_connector->use_dithering ?
DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
+
+ if (dcb->type != DCB_CONNECTOR_LVDS) {
+ if (dev_priv->card_type >= NV_50)
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ else
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ }
break;
}
- nouveau_connector_set_polling(connector);
-
drm_sysfs_connector_add(connector);
dcb->drm = connector;
return dcb->drm;
struct drm_connector *
nouveau_connector_create(struct drm_device *, int index);
-void
-nouveau_connector_set_polling(struct drm_connector *);
-
int
nouveau_connector_bpp(struct drm_connector *);
int pin_refcnt;
};
+#define nouveau_bo_tile_layout(nvbo) \
+ ((nvbo)->tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK)
+
static inline struct nouveau_bo *
nouveau_bo(struct ttm_buffer_object *bo)
{
void (*destroy_context)(struct nouveau_channel *);
int (*load_context)(struct nouveau_channel *);
int (*unload_context)(struct drm_device *);
+ void (*tlb_flush)(struct drm_device *dev);
};
struct nouveau_pgraph_object_method {
void (*destroy_context)(struct nouveau_channel *);
int (*load_context)(struct nouveau_channel *);
int (*unload_context)(struct drm_device *);
+ void (*tlb_flush)(struct drm_device *dev);
void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
uint32_t size, uint32_t pitch);
};
struct nv04_crtc_reg {
- unsigned char MiscOutReg; /* */
+ unsigned char MiscOutReg;
uint8_t CRTC[0xa0];
uint8_t CR58[0x10];
uint8_t Sequencer[5];
uint8_t Graphics[9];
uint8_t Attribute[21];
- unsigned char DAC[768]; /* Internal Colorlookuptable */
+ unsigned char DAC[768];
/* PCRTC regs */
uint32_t fb_start;
};
struct nv04_mode_state {
- uint32_t bpp;
- uint32_t width;
- uint32_t height;
- uint32_t interlace;
- uint32_t repaint0;
- uint32_t repaint1;
- uint32_t screen;
- uint32_t scale;
- uint32_t dither;
- uint32_t extra;
- uint32_t fifo;
- uint32_t pixel;
- uint32_t horiz;
- int arbitration0;
- int arbitration1;
- uint32_t pll;
- uint32_t pllB;
- uint32_t vpll;
- uint32_t vpll2;
- uint32_t vpllB;
- uint32_t vpll2B;
+ struct nv04_crtc_reg crtc_reg[2];
uint32_t pllsel;
uint32_t sel_clk;
- uint32_t general;
- uint32_t crtcOwner;
- uint32_t head;
- uint32_t head2;
- uint32_t cursorConfig;
- uint32_t cursor0;
- uint32_t cursor1;
- uint32_t cursor2;
- uint32_t timingH;
- uint32_t timingV;
- uint32_t displayV;
- uint32_t crtcSync;
-
- struct nv04_crtc_reg crtc_reg[2];
};
enum nouveau_card_type {
struct work_struct irq_work;
struct work_struct hpd_work;
+ struct {
+ spinlock_t lock;
+ uint32_t hpd0_bits;
+ uint32_t hpd1_bits;
+ } hpd_state;
+
struct list_head vbl_waiting;
struct {
extern void nv50_fifo_destroy_context(struct nouveau_channel *);
extern int nv50_fifo_load_context(struct nouveau_channel *);
extern int nv50_fifo_unload_context(struct drm_device *);
+extern void nv50_fifo_tlb_flush(struct drm_device *dev);
/* nvc0_fifo.c */
extern int nvc0_fifo_init(struct drm_device *);
extern int nv50_graph_unload_context(struct drm_device *);
extern void nv50_graph_context_switch(struct drm_device *);
extern int nv50_grctx_init(struct nouveau_grctx *);
+extern void nv50_graph_tlb_flush(struct drm_device *dev);
+extern void nv86_graph_tlb_flush(struct drm_device *dev);
/* nvc0_graph.c */
extern int nvc0_graph_init(struct drm_device *);
extern void nouveau_bo_wr16(struct nouveau_bo *nvbo, unsigned index, u16 val);
extern u32 nouveau_bo_rd32(struct nouveau_bo *nvbo, unsigned index);
extern void nouveau_bo_wr32(struct nouveau_bo *nvbo, unsigned index, u32 val);
-extern int nouveau_bo_sync_gpu(struct nouveau_bo *, struct nouveau_channel *);
/* nouveau_fence.c */
struct nouveau_fence;
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_semaphore *sema;
+ int ret;
if (!USE_SEMA(dev))
return NULL;
if (!sema)
goto fail;
+ ret = drm_mm_pre_get(&dev_priv->fence.heap);
+ if (ret)
+ goto fail;
+
spin_lock(&dev_priv->fence.lock);
sema->mem = drm_mm_search_free(&dev_priv->fence.heap, 4, 0, 0);
if (sema->mem)
- sema->mem = drm_mm_get_block(sema->mem, 4, 0);
+ sema->mem = drm_mm_get_block_atomic(sema->mem, 4, 0);
spin_unlock(&dev_priv->fence.lock);
if (!sema->mem)
}
static bool
-nouveau_gem_tile_flags_valid(struct drm_device *dev, uint32_t tile_flags) {
- switch (tile_flags) {
- case 0x0000:
- case 0x1800:
- case 0x2800:
- case 0x4800:
- case 0x7000:
- case 0x7400:
- case 0x7a00:
- case 0xe000:
- break;
- default:
- NV_ERROR(dev, "bad page flags: 0x%08x\n", tile_flags);
- return false;
+nouveau_gem_tile_flags_valid(struct drm_device *dev, uint32_t tile_flags)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->card_type >= NV_50) {
+ switch (tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK) {
+ case 0x0000:
+ case 0x1800:
+ case 0x2800:
+ case 0x4800:
+ case 0x7000:
+ case 0x7400:
+ case 0x7a00:
+ case 0xe000:
+ return true;
+ }
+ } else {
+ if (!(tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK))
+ return true;
}
- return true;
+ NV_ERROR(dev, "bad page flags: 0x%08x\n", tile_flags);
+ return false;
}
int
struct pll_lims pll_lim;
struct nouveau_pll_vals pv;
- uint32_t pllreg = head ? NV_RAMDAC_VPLL2 : NV_PRAMDAC_VPLL_COEFF;
+ enum pll_types pll = head ? PLL_VPLL1 : PLL_VPLL0;
- if (get_pll_limits(dev, pllreg, &pll_lim))
+ if (get_pll_limits(dev, pll, &pll_lim))
return;
- nouveau_hw_get_pllvals(dev, pllreg, &pv);
+ nouveau_hw_get_pllvals(dev, pll, &pv);
if (pv.M1 >= pll_lim.vco1.min_m && pv.M1 <= pll_lim.vco1.max_m &&
pv.N1 >= pll_lim.vco1.min_n && pv.N1 <= pll_lim.vco1.max_n &&
pv.M1 = pll_lim.vco1.max_m;
pv.N1 = pll_lim.vco1.min_n;
pv.log2P = pll_lim.max_usable_log2p;
- nouveau_hw_setpll(dev, pllreg, &pv);
+ nouveau_hw_setpll(dev, pll_lim.reg, &pv);
}
/*
NVWriteRAMDAC(dev, head, NV_PRAMDAC_CU_START_POS, curpos);
}
+static inline void
+nv_set_crtc_base(struct drm_device *dev, int head, uint32_t offset)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ NVWriteCRTC(dev, head, NV_PCRTC_START, offset);
+
+ if (dev_priv->card_type == NV_04) {
+ /*
+ * Hilarious, the 24th bit doesn't want to stick to
+ * PCRTC_START...
+ */
+ int cre_heb = NVReadVgaCrtc(dev, head, NV_CIO_CRE_HEB__INDEX);
+
+ NVWriteVgaCrtc(dev, head, NV_CIO_CRE_HEB__INDEX,
+ (cre_heb & ~0x40) | ((offset >> 18) & 0x40));
+ }
+}
+
static inline void
nv_show_cursor(struct drm_device *dev, int head, bool show)
{
if (index >= DCB_MAX_NUM_I2C_ENTRIES)
return NULL;
- if (dev_priv->chipset >= NV_50 && (i2c->entry & 0x00000100)) {
+ if (dev_priv->card_type >= NV_50 && (i2c->entry & 0x00000100)) {
uint32_t reg = 0xe500, val;
if (i2c->port_type == 6) {
#include "nouveau_connector.h"
#include "nv50_display.h"
+static DEFINE_RATELIMIT_STATE(nouveau_ratelimit_state, 3 * HZ, 20);
+
+static int nouveau_ratelimit(void)
+{
+ return __ratelimit(&nouveau_ratelimit_state);
+}
+
void
nouveau_irq_preinstall(struct drm_device *dev)
{
if (dev_priv->card_type >= NV_50) {
INIT_WORK(&dev_priv->irq_work, nv50_display_irq_handler_bh);
INIT_WORK(&dev_priv->hpd_work, nv50_display_irq_hotplug_bh);
+ spin_lock_init(&dev_priv->hpd_state.lock);
INIT_LIST_HEAD(&dev_priv->vbl_waiting);
}
}
}
if (status & NV_PFIFO_INTR_DMA_PUSHER) {
- u32 get = nv_rd32(dev, 0x003244);
- u32 put = nv_rd32(dev, 0x003240);
+ u32 dma_get = nv_rd32(dev, 0x003244);
+ u32 dma_put = nv_rd32(dev, 0x003240);
u32 push = nv_rd32(dev, 0x003220);
u32 state = nv_rd32(dev, 0x003228);
u32 ib_get = nv_rd32(dev, 0x003334);
u32 ib_put = nv_rd32(dev, 0x003330);
- NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
+ if (nouveau_ratelimit())
+ NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
"Put 0x%02x%08x IbGet 0x%08x IbPut 0x%08x "
"State 0x%08x Push 0x%08x\n",
- chid, ho_get, get, ho_put, put, ib_get, ib_put,
- state, push);
+ chid, ho_get, dma_get, ho_put,
+ dma_put, ib_get, ib_put, state,
+ push);
/* METHOD_COUNT, in DMA_STATE on earlier chipsets */
nv_wr32(dev, 0x003364, 0x00000000);
- if (get != put || ho_get != ho_put) {
- nv_wr32(dev, 0x003244, put);
+ if (dma_get != dma_put || ho_get != ho_put) {
+ nv_wr32(dev, 0x003244, dma_put);
nv_wr32(dev, 0x003328, ho_put);
} else
if (ib_get != ib_put) {
} else {
NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%08x "
"Put 0x%08x State 0x%08x Push 0x%08x\n",
- chid, get, put, state, push);
+ chid, dma_get, dma_put, state, push);
- if (get != put)
- nv_wr32(dev, 0x003244, put);
+ if (dma_get != dma_put)
+ nv_wr32(dev, 0x003244, dma_put);
}
nv_wr32(dev, 0x003228, 0x00000000);
}
if (status) {
- NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
- status, chid);
+ if (nouveau_ratelimit())
+ NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
+ status, chid);
nv_wr32(dev, NV03_PFIFO_INTR_0, status);
status = 0;
}
nouveau_graph_dump_trap_info(dev, "PGRAPH_NOTIFY", &trap);
}
-static DEFINE_RATELIMIT_STATE(nouveau_ratelimit_state, 3 * HZ, 20);
-
-static int nouveau_ratelimit(void)
-{
- return __ratelimit(&nouveau_ratelimit_state);
-}
-
static inline void
nouveau_pgraph_intr_error(struct drm_device *dev, uint32_t nsource)
#include "drmP.h"
#include "drm.h"
#include "drm_sarea.h"
-#include "nouveau_drv.h"
-#define MIN(a,b) a < b ? a : b
+#include "nouveau_drv.h"
+#include "nouveau_pm.h"
/*
* NV10-NV40 tiling helpers
}
}
}
- dev_priv->engine.instmem.flush(dev);
- nv50_vm_flush(dev, 5);
- nv50_vm_flush(dev, 0);
- nv50_vm_flush(dev, 4);
+ dev_priv->engine.instmem.flush(dev);
+ dev_priv->engine.fifo.tlb_flush(dev);
+ dev_priv->engine.graph.tlb_flush(dev);
nv50_vm_flush(dev, 6);
return 0;
}
pte++;
}
}
- dev_priv->engine.instmem.flush(dev);
- nv50_vm_flush(dev, 5);
- nv50_vm_flush(dev, 0);
- nv50_vm_flush(dev, 4);
+ dev_priv->engine.instmem.flush(dev);
+ dev_priv->engine.fifo.tlb_flush(dev);
+ dev_priv->engine.graph.tlb_flush(dev);
nv50_vm_flush(dev, 6);
}
void
nouveau_mem_timing_init(struct drm_device *dev)
{
+ /* cards < NVC0 only */
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
struct nouveau_pm_memtimings *memtimings = &pm->memtimings;
tUNK_19 = 1;
tUNK_20 = 0;
tUNK_21 = 0;
- switch (MIN(recordlen,21)) {
- case 21:
+ switch (min(recordlen, 22)) {
+ case 22:
tUNK_21 = entry[21];
- case 20:
+ case 21:
tUNK_20 = entry[20];
- case 19:
+ case 20:
tUNK_19 = entry[19];
- case 18:
+ case 19:
tUNK_18 = entry[18];
default:
tUNK_0 = entry[0];
timing->reg_100228 = (tUNK_12 << 16 | tUNK_11 << 8 | tUNK_10);
if(recordlen > 19) {
timing->reg_100228 += (tUNK_19 - 1) << 24;
- } else {
+ }/* I cannot back-up this else-statement right now
+ else {
timing->reg_100228 += tUNK_12 << 24;
- }
+ }*/
/* XXX: reg_10022c */
+ timing->reg_10022c = tUNK_2 - 1;
timing->reg_100230 = (tUNK_20 << 24 | tUNK_21 << 16 |
tUNK_13 << 8 | tUNK_13);
/* XXX: +6? */
timing->reg_100234 = (tRAS << 24 | (tUNK_19 + 6) << 8 | tRC);
- if(tUNK_10 > tUNK_11) {
- timing->reg_100234 += tUNK_10 << 16;
- } else {
- timing->reg_100234 += tUNK_11 << 16;
+ timing->reg_100234 += max(tUNK_10,tUNK_11) << 16;
+
+ /* XXX; reg_100238, reg_10023c
+ * reg: 0x00??????
+ * reg_10023c:
+ * 0 for pre-NV50 cards
+ * 0x????0202 for NV50+ cards (empirical evidence) */
+ if(dev_priv->card_type >= NV_50) {
+ timing->reg_10023c = 0x202;
}
- /* XXX; reg_100238, reg_10023c */
NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x %08x\n", i,
timing->reg_100220, timing->reg_100224,
timing->reg_100228, timing->reg_10022c);
if (ramin == NULL) {
spin_unlock(&dev_priv->ramin_lock);
nouveau_gpuobj_ref(NULL, &gpuobj);
- return ret;
+ return -ENOMEM;
}
ramin = drm_mm_get_block_atomic(ramin, size, align);
}
}
+#ifdef CONFIG_HWMON
static ssize_t
nouveau_hwmon_show_temp(struct device *d, struct device_attribute *a, char *buf)
{
static const struct attribute_group hwmon_attrgroup = {
.attrs = hwmon_attributes,
};
+#endif
static int
nouveau_hwmon_init(struct drm_device *dev)
{
+#ifdef CONFIG_HWMON
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
struct device *hwmon_dev;
}
pm->hwmon = hwmon_dev;
-
+#endif
return 0;
}
static void
nouveau_hwmon_fini(struct drm_device *dev)
{
+#ifdef CONFIG_HWMON
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup);
hwmon_device_unregister(pm->hwmon);
}
+#endif
}
int
return -ENOMEM;
}
+static struct nouveau_ramht_entry *
+nouveau_ramht_remove_entry(struct nouveau_channel *chan, u32 handle)
+{
+ struct nouveau_ramht *ramht = chan ? chan->ramht : NULL;
+ struct nouveau_ramht_entry *entry;
+ unsigned long flags;
+
+ if (!ramht)
+ return NULL;
+
+ spin_lock_irqsave(&ramht->lock, flags);
+ list_for_each_entry(entry, &ramht->entries, head) {
+ if (entry->channel == chan &&
+ (!handle || entry->handle == handle)) {
+ list_del(&entry->head);
+ spin_unlock_irqrestore(&ramht->lock, flags);
+
+ return entry;
+ }
+ }
+ spin_unlock_irqrestore(&ramht->lock, flags);
+
+ return NULL;
+}
+
static void
-nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
+nouveau_ramht_remove_hash(struct nouveau_channel *chan, u32 handle)
{
struct drm_device *dev = chan->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_instmem_engine *instmem = &dev_priv->engine.instmem;
struct nouveau_gpuobj *ramht = chan->ramht->gpuobj;
- struct nouveau_ramht_entry *entry, *tmp;
+ unsigned long flags;
u32 co, ho;
- list_for_each_entry_safe(entry, tmp, &chan->ramht->entries, head) {
- if (entry->channel != chan || entry->handle != handle)
- continue;
-
- nouveau_gpuobj_ref(NULL, &entry->gpuobj);
- list_del(&entry->head);
- kfree(entry);
- break;
- }
-
+ spin_lock_irqsave(&chan->ramht->lock, flags);
co = ho = nouveau_ramht_hash_handle(chan, handle);
do {
if (nouveau_ramht_entry_valid(dev, ramht, co) &&
nv_wo32(ramht, co + 0, 0x00000000);
nv_wo32(ramht, co + 4, 0x00000000);
instmem->flush(dev);
- return;
+ goto out;
}
co += 8;
NV_ERROR(dev, "RAMHT entry not found. ch=%d, handle=0x%08x\n",
chan->id, handle);
+out:
+ spin_unlock_irqrestore(&chan->ramht->lock, flags);
}
void
nouveau_ramht_remove(struct nouveau_channel *chan, u32 handle)
{
- struct nouveau_ramht *ramht = chan->ramht;
- unsigned long flags;
+ struct nouveau_ramht_entry *entry;
- spin_lock_irqsave(&ramht->lock, flags);
- nouveau_ramht_remove_locked(chan, handle);
- spin_unlock_irqrestore(&ramht->lock, flags);
+ entry = nouveau_ramht_remove_entry(chan, handle);
+ if (!entry)
+ return;
+
+ nouveau_ramht_remove_hash(chan, entry->handle);
+ nouveau_gpuobj_ref(NULL, &entry->gpuobj);
+ kfree(entry);
}
struct nouveau_gpuobj *
nouveau_ramht_ref(struct nouveau_ramht *ref, struct nouveau_ramht **ptr,
struct nouveau_channel *chan)
{
- struct nouveau_ramht_entry *entry, *tmp;
+ struct nouveau_ramht_entry *entry;
struct nouveau_ramht *ramht;
- unsigned long flags;
if (ref)
kref_get(&ref->refcount);
ramht = *ptr;
if (ramht) {
- spin_lock_irqsave(&ramht->lock, flags);
- list_for_each_entry_safe(entry, tmp, &ramht->entries, head) {
- if (entry->channel != chan)
- continue;
-
- nouveau_ramht_remove_locked(chan, entry->handle);
+ while ((entry = nouveau_ramht_remove_entry(chan, 0))) {
+ nouveau_ramht_remove_hash(chan, entry->handle);
+ nouveau_gpuobj_ref(NULL, &entry->gpuobj);
+ kfree(entry);
}
- spin_unlock_irqrestore(&ramht->lock, flags);
kref_put(&ramht->refcount, nouveau_ramht_del);
}
dev_priv->engine.instmem.flush(nvbe->dev);
if (dev_priv->card_type == NV_50) {
- nv50_vm_flush(dev, 5); /* PGRAPH */
- nv50_vm_flush(dev, 0); /* PFIFO */
+ dev_priv->engine.fifo.tlb_flush(dev);
+ dev_priv->engine.graph.tlb_flush(dev);
}
nvbe->bound = true;
dev_priv->engine.instmem.flush(nvbe->dev);
if (dev_priv->card_type == NV_50) {
- nv50_vm_flush(dev, 5);
- nv50_vm_flush(dev, 0);
+ dev_priv->engine.fifo.tlb_flush(dev);
+ dev_priv->engine.graph.tlb_flush(dev);
}
nvbe->bound = false;
int i, ret;
if (dev_priv->card_type < NV_50) {
- aper_size = (64 * 1024 * 1024);
+ if(dev_priv->ramin_rsvd_vram < 2 * 1024 * 1024)
+ aper_size = 64 * 1024 * 1024;
+ else
+ aper_size = 512 * 1024 * 1024;
+
obj_size = (aper_size >> NV_CTXDMA_PAGE_SHIFT) * 4;
obj_size += 8; /* ctxdma header */
} else {
engine->graph.destroy_context = nv50_graph_destroy_context;
engine->graph.load_context = nv50_graph_load_context;
engine->graph.unload_context = nv50_graph_unload_context;
+ if (dev_priv->chipset != 0x86)
+ engine->graph.tlb_flush = nv50_graph_tlb_flush;
+ else {
+ /* from what i can see nvidia do this on every
+ * pre-NVA3 board except NVAC, but, we've only
+ * ever seen problems on NV86
+ */
+ engine->graph.tlb_flush = nv86_graph_tlb_flush;
+ }
engine->fifo.channels = 128;
engine->fifo.init = nv50_fifo_init;
engine->fifo.takedown = nv50_fifo_takedown;
engine->fifo.destroy_context = nv50_fifo_destroy_context;
engine->fifo.load_context = nv50_fifo_load_context;
engine->fifo.unload_context = nv50_fifo_unload_context;
+ engine->fifo.tlb_flush = nv50_fifo_tlb_flush;
engine->display.early_init = nv50_display_early_init;
engine->display.late_takedown = nv50_display_late_takedown;
engine->display.create = nv50_display_create;
case NOUVEAU_GETPARAM_PTIMER_TIME:
getparam->value = dev_priv->engine.timer.read(dev);
break;
+ case NOUVEAU_GETPARAM_HAS_BO_USAGE:
+ getparam->value = 1;
+ break;
case NOUVEAU_GETPARAM_GRAPH_UNITS:
/* NV40 and NV50 versions are quite different, but register
* address is the same. User is supposed to know the card
}
/* FALLTHRU */
default:
- NV_ERROR(dev, "unknown parameter %lld\n", getparam->param);
+ NV_DEBUG(dev, "unknown parameter %lld\n", getparam->param);
return -EINVAL;
}
switch (setparam->param) {
default:
- NV_ERROR(dev, "unknown parameter %lld\n", setparam->param);
+ NV_DEBUG(dev, "unknown parameter %lld\n", setparam->param);
return -EINVAL;
}
int offset = sensor->offset_mult / sensor->offset_div;
int core_temp;
- if (dev_priv->chipset >= 0x50) {
+ if (dev_priv->card_type >= NV_50) {
core_temp = nv_rd32(dev, 0x20008);
} else {
core_temp = nv_rd32(dev, 0x0015b4) & 0x1fff;
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
struct drm_device *dev = crtc->dev;
- struct drm_connector *connector;
unsigned char seq1 = 0, crtc17 = 0;
unsigned char crtc1A;
NVVgaSeqReset(dev, nv_crtc->index, false);
NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A);
-
- /* Update connector polling modes */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
- nouveau_connector_set_polling(connector);
}
static bool
/* Update the framebuffer location. */
regp->fb_start = nv_crtc->fb.offset & ~3;
regp->fb_start += (y * drm_fb->pitch) + (x * drm_fb->bits_per_pixel / 8);
- NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_START, regp->fb_start);
+ nv_set_crtc_base(dev, nv_crtc->index, regp->fb_start);
/* Update the arbitration parameters. */
nouveau_calc_arb(dev, crtc->mode.clock, drm_fb->bits_per_pixel,
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
- /* For internal panels and gpu scaling on DVI we need the native mode */
- if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
- if (!nv_connector->native_mode)
- return false;
+ if (!nv_connector->native_mode ||
+ nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+ mode->hdisplay > nv_connector->native_mode->hdisplay ||
+ mode->vdisplay > nv_connector->native_mode->vdisplay) {
+ nv_encoder->mode = *adjusted_mode;
+
+ } else {
nv_encoder->mode = *nv_connector->native_mode;
adjusted_mode->clock = nv_connector->native_mode->clock;
- } else {
- nv_encoder->mode = *adjusted_mode;
}
return true;
reg += 4;
nouveau_hw_setpll(dev, reg, &state->calc);
+
+ if (dev_priv->card_type < NV_30 && reg == NV_PRAMDAC_MPLL_COEFF) {
+ if (dev_priv->card_type == NV_20)
+ nv_mask(dev, 0x1002c4, 0, 1 << 20);
+
+ /* Reset the DLLs */
+ nv_mask(dev, 0x1002c0, 0, 1 << 8);
+ }
+
kfree(state);
}
int *N, int *fN, int *M, int *P)
{
fixed20_12 fb_div, a, b;
+ u32 refclk = pll->refclk / 10;
+ u32 max_vco_freq = pll->vco1.maxfreq / 10;
+ u32 max_vco_inputfreq = pll->vco1.max_inputfreq / 10;
+ clk /= 10;
- *P = pll->vco1.maxfreq / clk;
+ *P = max_vco_freq / clk;
if (*P > pll->max_p)
*P = pll->max_p;
if (*P < pll->min_p)
*P = pll->min_p;
- /* *M = ceil(refclk / pll->vco.max_inputfreq); */
- a.full = dfixed_const(pll->refclk);
- b.full = dfixed_const(pll->vco1.max_inputfreq);
+ /* *M = floor((refclk + max_vco_inputfreq) / max_vco_inputfreq); */
+ a.full = dfixed_const(refclk + max_vco_inputfreq);
+ b.full = dfixed_const(max_vco_inputfreq);
a.full = dfixed_div(a, b);
- a.full = dfixed_ceil(a);
+ a.full = dfixed_floor(a);
*M = dfixed_trunc(a);
/* fb_div = (vco * *M) / refclk; */
fb_div.full = dfixed_const(clk * *P);
fb_div.full = dfixed_mul(fb_div, a);
- a.full = dfixed_const(pll->refclk);
+ a.full = dfixed_const(refclk);
fb_div.full = dfixed_div(fb_div, a);
/* *N = floor(fb_div); */
}
nv_crtc->fb.offset = fb->nvbo->bo.offset - dev_priv->vm_vram_base;
- nv_crtc->fb.tile_flags = fb->nvbo->tile_flags;
+ nv_crtc->fb.tile_flags = nouveau_bo_tile_layout(fb->nvbo);
nv_crtc->fb.cpp = drm_fb->bits_per_pixel / 8;
if (!nv_crtc->fb.blanked && dev_priv->chipset != 0x50) {
ret = RING_SPACE(evo, 2);
fb->nvbo->tile_mode);
}
if (dev_priv->chipset == 0x50)
- OUT_RING(evo, (fb->nvbo->tile_flags << 8) | format);
+ OUT_RING(evo, (nv_crtc->fb.tile_flags << 8) | format);
else
OUT_RING(evo, format);
struct drm_connector *connector;
const uint32_t gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
uint32_t unplug_mask, plug_mask, change_mask;
- uint32_t hpd0, hpd1 = 0;
+ uint32_t hpd0, hpd1;
- hpd0 = nv_rd32(dev, 0xe054) & nv_rd32(dev, 0xe050);
+ spin_lock_irq(&dev_priv->hpd_state.lock);
+ hpd0 = dev_priv->hpd_state.hpd0_bits;
+ dev_priv->hpd_state.hpd0_bits = 0;
+ hpd1 = dev_priv->hpd_state.hpd1_bits;
+ dev_priv->hpd_state.hpd1_bits = 0;
+ spin_unlock_irq(&dev_priv->hpd_state.lock);
+
+ hpd0 &= nv_rd32(dev, 0xe050);
if (dev_priv->chipset >= 0x90)
- hpd1 = nv_rd32(dev, 0xe074) & nv_rd32(dev, 0xe070);
+ hpd1 &= nv_rd32(dev, 0xe070);
plug_mask = (hpd0 & 0x0000ffff) | (hpd1 << 16);
unplug_mask = (hpd0 >> 16) | (hpd1 & 0xffff0000);
helper->dpms(connector->encoder, DRM_MODE_DPMS_OFF);
}
- nv_wr32(dev, 0xe054, nv_rd32(dev, 0xe054));
- if (dev_priv->chipset >= 0x90)
- nv_wr32(dev, 0xe074, nv_rd32(dev, 0xe074));
-
drm_helper_hpd_irq_event(dev);
}
uint32_t delayed = 0;
if (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_HOTPLUG) {
- if (!work_pending(&dev_priv->hpd_work))
- queue_work(dev_priv->wq, &dev_priv->hpd_work);
+ uint32_t hpd0_bits, hpd1_bits = 0;
+
+ hpd0_bits = nv_rd32(dev, 0xe054);
+ nv_wr32(dev, 0xe054, hpd0_bits);
+
+ if (dev_priv->chipset >= 0x90) {
+ hpd1_bits = nv_rd32(dev, 0xe074);
+ nv_wr32(dev, 0xe074, hpd1_bits);
+ }
+
+ spin_lock(&dev_priv->hpd_state.lock);
+ dev_priv->hpd_state.hpd0_bits |= hpd0_bits;
+ dev_priv->hpd_state.hpd1_bits |= hpd1_bits;
+ spin_unlock(&dev_priv->hpd_state.lock);
+
+ queue_work(dev_priv->wq, &dev_priv->hpd_work);
}
while (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_DISPLAY) {
return 0;
}
+void
+nv50_fifo_tlb_flush(struct drm_device *dev)
+{
+ nv50_vm_flush(dev, 5);
+}
{ 0x8597, false, NULL }, /* tesla (nva3, nva5, nva8) */
{}
};
+
+void
+nv50_graph_tlb_flush(struct drm_device *dev)
+{
+ nv50_vm_flush(dev, 0);
+}
+
+void
+nv86_graph_tlb_flush(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+ bool idle, timeout = false;
+ unsigned long flags;
+ u64 start;
+ u32 tmp;
+
+ spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+ nv_mask(dev, 0x400500, 0x00000001, 0x00000000);
+
+ start = ptimer->read(dev);
+ do {
+ idle = true;
+
+ for (tmp = nv_rd32(dev, 0x400380); tmp && idle; tmp >>= 3) {
+ if ((tmp & 7) == 1)
+ idle = false;
+ }
+
+ for (tmp = nv_rd32(dev, 0x400384); tmp && idle; tmp >>= 3) {
+ if ((tmp & 7) == 1)
+ idle = false;
+ }
+
+ for (tmp = nv_rd32(dev, 0x400388); tmp && idle; tmp >>= 3) {
+ if ((tmp & 7) == 1)
+ idle = false;
+ }
+ } while (!idle && !(timeout = ptimer->read(dev) - start > 2000000000));
+
+ if (timeout) {
+ NV_ERROR(dev, "PGRAPH TLB flush idle timeout fail: "
+ "0x%08x 0x%08x 0x%08x 0x%08x\n",
+ nv_rd32(dev, 0x400700), nv_rd32(dev, 0x400380),
+ nv_rd32(dev, 0x400384), nv_rd32(dev, 0x400388));
+ }
+
+ nv50_vm_flush(dev, 0);
+
+ nv_mask(dev, 0x400500, 0x00000001, 0x00000001);
+ spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+}
}
dev_priv->engine.instmem.flush(dev);
- nv50_vm_flush(dev, 4);
nv50_vm_flush(dev, 6);
gpuobj->im_bound = 1;
base += 3;
break;
case ATOM_IIO_WRITE:
+ (void)ctx->card->ioreg_read(ctx->card, CU16(base + 1));
ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp);
base += 3;
break;
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
- atombios_blank_crtc(crtc, ATOM_ENABLE);
+ if (radeon_crtc->enabled)
+ atombios_blank_crtc(crtc, ATOM_ENABLE);
if (ASIC_IS_DCE3(rdev))
atombios_enable_crtc_memreq(crtc, ATOM_DISABLE);
atombios_enable_crtc(crtc, ATOM_DISABLE);
dp_clock = dig_connector->dp_clock;
}
}
-
+#if 0 /* doesn't work properly on some laptops */
/* use recommended ref_div for ss */
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
if (ss_enabled) {
}
}
}
-
+#endif
if (ASIC_IS_AVIVO(rdev)) {
/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
unsigned i;
u32 tmp;
+ WREG32(HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
+
WREG32(VM_CONTEXT0_REQUEST_RESPONSE, REQUEST_TYPE(1));
for (i = 0; i < rdev->usec_timeout; i++) {
/* read MC_STATUS */
}
}
- rdev->config.evergreen.tile_config = gb_addr_config;
+ /* setup tiling info dword. gb_addr_config is not adequate since it does
+ * not have bank info, so create a custom tiling dword.
+ * bits 3:0 num_pipes
+ * bits 7:4 num_banks
+ * bits 11:8 group_size
+ * bits 15:12 row_size
+ */
+ rdev->config.evergreen.tile_config = 0;
+ switch (rdev->config.evergreen.max_tile_pipes) {
+ case 1:
+ default:
+ rdev->config.evergreen.tile_config |= (0 << 0);
+ break;
+ case 2:
+ rdev->config.evergreen.tile_config |= (1 << 0);
+ break;
+ case 4:
+ rdev->config.evergreen.tile_config |= (2 << 0);
+ break;
+ case 8:
+ rdev->config.evergreen.tile_config |= (3 << 0);
+ break;
+ }
+ rdev->config.evergreen.tile_config |=
+ ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
+ rdev->config.evergreen.tile_config |=
+ ((mc_arb_ramcfg & BURSTLENGTH_MASK) >> BURSTLENGTH_SHIFT) << 8;
+ rdev->config.evergreen.tile_config |=
+ ((gb_addr_config & 0x30000000) >> 28) << 12;
+
WREG32(GB_BACKEND_MAP, gb_backend_map);
WREG32(GB_ADDR_CONFIG, gb_addr_config);
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
static int evergreen_gpu_soft_reset(struct radeon_device *rdev)
{
struct evergreen_mc_save save;
- u32 srbm_reset = 0;
u32 grbm_reset = 0;
dev_info(rdev->dev, "GPU softreset \n");
udelay(50);
WREG32(GRBM_SOFT_RESET, 0);
(void)RREG32(GRBM_SOFT_RESET);
-
- /* reset all the system blocks */
- srbm_reset = SRBM_SOFT_RESET_ALL_MASK;
-
- dev_info(rdev->dev, " SRBM_SOFT_RESET=0x%08X\n", srbm_reset);
- WREG32(SRBM_SOFT_RESET, srbm_reset);
- (void)RREG32(SRBM_SOFT_RESET);
- udelay(50);
- WREG32(SRBM_SOFT_RESET, 0);
- (void)RREG32(SRBM_SOFT_RESET);
/* Wait a little for things to settle down */
udelay(50);
dev_info(rdev->dev, " GRBM_STATUS=0x%08X\n",
RREG32(GRBM_STATUS_SE1));
dev_info(rdev->dev, " SRBM_STATUS=0x%08X\n",
RREG32(SRBM_STATUS));
- /* After reset we need to reinit the asic as GPU often endup in an
- * incoherent state.
- */
- atom_asic_init(rdev->mode_info.atom_context);
evergreen_mc_resume(rdev, &save);
return 0;
}
{
int r;
+ /* reset the asic, the gfx blocks are often in a bad state
+ * after the driver is unloaded or after a resume
+ */
+ if (radeon_asic_reset(rdev))
+ dev_warn(rdev->dev, "GPU reset failed !\n");
/* Do not reset GPU before posting, on rv770 hw unlike on r500 hw,
* posting will perform necessary task to bring back GPU into good
* shape.
r = radeon_atombios_init(rdev);
if (r)
return r;
+ /* reset the asic, the gfx blocks are often in a bad state
+ * after the driver is unloaded or after a resume
+ */
+ if (radeon_asic_reset(rdev))
+ dev_warn(rdev->dev, "GPU reset failed !\n");
/* Post card if necessary */
if (!evergreen_card_posted(rdev)) {
if (!rdev->bios) {
obj_size += evergreen_ps_size * 4;
obj_size = ALIGN(obj_size, 256);
- r = radeon_bo_create(rdev, NULL, obj_size, true, RADEON_GEM_DOMAIN_VRAM,
+ r = radeon_bo_create(rdev, NULL, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
&rdev->r600_blit.shader_obj);
if (r) {
DRM_ERROR("evergreen failed to allocate shader\n");
#define HDP_NONSURFACE_BASE 0x2C04
#define HDP_NONSURFACE_INFO 0x2C08
#define HDP_NONSURFACE_SIZE 0x2C0C
+#define HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
#define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0
#define HDP_TILING_CONFIG 0x2F3C
u32 tmp;
/* flush hdp cache so updates hit vram */
- if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+ if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+ !(rdev->flags & RADEON_IS_AGP)) {
void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
u32 tmp;
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
* rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+ * This seems to cause problems on some AGP cards. Just use the old
+ * method for them.
*/
WREG32(HDP_DEBUG1, 0);
tmp = readl((void __iomem *)ptr);
mc->vram_end, mc->real_vram_size >> 20);
} else {
u64 base = 0;
- if (rdev->flags & RADEON_IS_IGP)
- base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
+ if (rdev->flags & RADEON_IS_IGP) {
+ base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF;
+ base <<= 24;
+ }
radeon_vram_location(rdev, &rdev->mc, base);
rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
u32 srbm_status;
u32 grbm_status;
u32 grbm_status2;
+ struct r100_gpu_lockup *lockup;
int r;
+ if (rdev->family >= CHIP_RV770)
+ lockup = &rdev->config.rv770.lockup;
+ else
+ lockup = &rdev->config.r600.lockup;
+
srbm_status = RREG32(R_000E50_SRBM_STATUS);
grbm_status = RREG32(R_008010_GRBM_STATUS);
grbm_status2 = RREG32(R_008014_GRBM_STATUS2);
if (!G_008010_GUI_ACTIVE(grbm_status)) {
- r100_gpu_lockup_update(&rdev->config.r300.lockup, &rdev->cp);
+ r100_gpu_lockup_update(lockup, &rdev->cp);
return false;
}
/* force CP activities */
radeon_ring_unlock_commit(rdev);
}
rdev->cp.rptr = RREG32(R600_CP_RB_RPTR);
- return r100_gpu_cp_is_lockup(rdev, &rdev->config.r300.lockup, &rdev->cp);
+ return r100_gpu_cp_is_lockup(rdev, lockup, &rdev->cp);
}
int r600_asic_reset(struct radeon_device *rdev)
/* Allocate ring buffer */
if (rdev->ih.ring_obj == NULL) {
r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size,
- true,
+ PAGE_SIZE, true,
RADEON_GEM_DOMAIN_GTT,
&rdev->ih.ring_obj);
if (r) {
void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
{
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
- * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+ * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL.
+ * This seems to cause problems on some AGP cards. Just use the old
+ * method for them.
*/
if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
- rdev->vram_scratch.ptr) {
+ rdev->vram_scratch.ptr && !(rdev->flags & RADEON_IS_AGP)) {
void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp;
obj_size += r6xx_ps_size * 4;
obj_size = ALIGN(obj_size, 256);
- r = radeon_bo_create(rdev, NULL, obj_size, true, RADEON_GEM_DOMAIN_VRAM,
+ r = radeon_bo_create(rdev, NULL, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
&rdev->r600_blit.shader_obj);
if (r) {
DRM_ERROR("r600 failed to allocate shader\n");
u32 nsamples;
u32 cb_color_base_last[8];
struct radeon_bo *cb_color_bo[8];
+ u64 cb_color_bo_mc[8];
u32 cb_color_bo_offset[8];
struct radeon_bo *cb_color_frag_bo[8];
struct radeon_bo *cb_color_tile_bo[8];
u32 db_depth_size;
u32 db_offset;
struct radeon_bo *db_bo;
+ u64 db_bo_mc;
};
static inline int r600_bpe_from_format(u32 *bpe, u32 format)
return 0;
}
+struct array_mode_checker {
+ int array_mode;
+ u32 group_size;
+ u32 nbanks;
+ u32 npipes;
+ u32 nsamples;
+ u32 bpe;
+};
+
+/* returns alignment in pixels for pitch/height/depth and bytes for base */
+static inline int r600_get_array_mode_alignment(struct array_mode_checker *values,
+ u32 *pitch_align,
+ u32 *height_align,
+ u32 *depth_align,
+ u64 *base_align)
+{
+ u32 tile_width = 8;
+ u32 tile_height = 8;
+ u32 macro_tile_width = values->nbanks;
+ u32 macro_tile_height = values->npipes;
+ u32 tile_bytes = tile_width * tile_height * values->bpe * values->nsamples;
+ u32 macro_tile_bytes = macro_tile_width * macro_tile_height * tile_bytes;
+
+ switch (values->array_mode) {
+ case ARRAY_LINEAR_GENERAL:
+ /* technically tile_width/_height for pitch/height */
+ *pitch_align = 1; /* tile_width */
+ *height_align = 1; /* tile_height */
+ *depth_align = 1;
+ *base_align = 1;
+ break;
+ case ARRAY_LINEAR_ALIGNED:
+ *pitch_align = max((u32)64, (u32)(values->group_size / values->bpe));
+ *height_align = tile_height;
+ *depth_align = 1;
+ *base_align = values->group_size;
+ break;
+ case ARRAY_1D_TILED_THIN1:
+ *pitch_align = max((u32)tile_width,
+ (u32)(values->group_size /
+ (tile_height * values->bpe * values->nsamples)));
+ *height_align = tile_height;
+ *depth_align = 1;
+ *base_align = values->group_size;
+ break;
+ case ARRAY_2D_TILED_THIN1:
+ *pitch_align = max((u32)macro_tile_width,
+ (u32)(((values->group_size / tile_height) /
+ (values->bpe * values->nsamples)) *
+ values->nbanks)) * tile_width;
+ *height_align = macro_tile_height * tile_height;
+ *depth_align = 1;
+ *base_align = max(macro_tile_bytes,
+ (*pitch_align) * values->bpe * (*height_align) * values->nsamples);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static void r600_cs_track_init(struct r600_cs_track *track)
{
int i;
track->cb_color_info[i] = 0;
track->cb_color_bo[i] = NULL;
track->cb_color_bo_offset[i] = 0xFFFFFFFF;
+ track->cb_color_bo_mc[i] = 0xFFFFFFFF;
}
track->cb_target_mask = 0xFFFFFFFF;
track->cb_shader_mask = 0xFFFFFFFF;
track->db_bo = NULL;
+ track->db_bo_mc = 0xFFFFFFFF;
/* assume the biggest format and that htile is enabled */
track->db_depth_info = 7 | (1 << 25);
track->db_depth_view = 0xFFFFC000;
static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
{
struct r600_cs_track *track = p->track;
- u32 bpe = 0, pitch, slice_tile_max, size, tmp, height, pitch_align;
+ u32 bpe = 0, slice_tile_max, size, tmp;
+ u32 height, height_align, pitch, pitch_align, depth_align;
+ u64 base_offset, base_align;
+ struct array_mode_checker array_check;
volatile u32 *ib = p->ib->ptr;
unsigned array_mode;
i, track->cb_color_info[i]);
return -EINVAL;
}
- /* pitch is the number of 8x8 tiles per row */
- pitch = G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1;
+ /* pitch in pixels */
+ pitch = (G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1) * 8;
slice_tile_max = G_028060_SLICE_TILE_MAX(track->cb_color_size[i]) + 1;
slice_tile_max *= 64;
- height = slice_tile_max / (pitch * 8);
+ height = slice_tile_max / pitch;
if (height > 8192)
height = 8192;
array_mode = G_0280A0_ARRAY_MODE(track->cb_color_info[i]);
+
+ base_offset = track->cb_color_bo_mc[i] + track->cb_color_bo_offset[i];
+ array_check.array_mode = array_mode;
+ array_check.group_size = track->group_size;
+ array_check.nbanks = track->nbanks;
+ array_check.npipes = track->npipes;
+ array_check.nsamples = track->nsamples;
+ array_check.bpe = bpe;
+ if (r600_get_array_mode_alignment(&array_check,
+ &pitch_align, &height_align, &depth_align, &base_align)) {
+ dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
+ G_0280A0_ARRAY_MODE(track->cb_color_info[i]), i,
+ track->cb_color_info[i]);
+ return -EINVAL;
+ }
switch (array_mode) {
case V_0280A0_ARRAY_LINEAR_GENERAL:
- /* technically height & 0x7 */
break;
case V_0280A0_ARRAY_LINEAR_ALIGNED:
- pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
- if (!IS_ALIGNED(height, 8)) {
- dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
- __func__, __LINE__, height);
- return -EINVAL;
- }
break;
case V_0280A0_ARRAY_1D_TILED_THIN1:
- pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe * track->nsamples))) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
/* avoid breaking userspace */
if (height > 7)
height &= ~0x7;
- if (!IS_ALIGNED(height, 8)) {
- dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
- __func__, __LINE__, height);
- return -EINVAL;
- }
break;
case V_0280A0_ARRAY_2D_TILED_THIN1:
- pitch_align = max((u32)track->nbanks,
- (u32)(((track->group_size / 8) / (bpe * track->nsamples)) * track->nbanks)) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
- if (!IS_ALIGNED((height / 8), track->npipes)) {
- dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
- __func__, __LINE__, height);
- return -EINVAL;
- }
break;
default:
dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
track->cb_color_info[i]);
return -EINVAL;
}
+
+ if (!IS_ALIGNED(pitch, pitch_align)) {
+ dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
+ __func__, __LINE__, pitch);
+ return -EINVAL;
+ }
+ if (!IS_ALIGNED(height, height_align)) {
+ dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+ __func__, __LINE__, height);
+ return -EINVAL;
+ }
+ if (!IS_ALIGNED(base_offset, base_align)) {
+ dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+ return -EINVAL;
+ }
+
/* check offset */
- tmp = height * pitch * 8 * bpe;
+ tmp = height * pitch * bpe;
if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
/* the initial DDX does bad things with the CB size occasionally */
/* it rounds up height too far for slice tile max but the BO is smaller */
- tmp = (height - 7) * 8 * bpe;
- if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
- dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
- return -EINVAL;
- }
+ /* r600c,g also seem to flush at bad times in some apps resulting in
+ * bogus values here. So for linear just allow anything to avoid breaking
+ * broken userspace.
+ */
} else {
dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
return -EINVAL;
}
}
- if (!IS_ALIGNED(track->cb_color_bo_offset[i], track->group_size)) {
- dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->cb_color_bo_offset[i]);
- return -EINVAL;
- }
/* limit max tile */
- tmp = (height * pitch * 8) >> 6;
+ tmp = (height * pitch) >> 6;
if (tmp < slice_tile_max)
slice_tile_max = tmp;
- tmp = S_028060_PITCH_TILE_MAX(pitch - 1) |
+ tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) |
S_028060_SLICE_TILE_MAX(slice_tile_max - 1);
ib[track->cb_color_size_idx[i]] = tmp;
return 0;
/* Check depth buffer */
if (G_028800_STENCIL_ENABLE(track->db_depth_control) ||
G_028800_Z_ENABLE(track->db_depth_control)) {
- u32 nviews, bpe, ntiles, pitch, pitch_align, height, size, slice_tile_max;
+ u32 nviews, bpe, ntiles, size, slice_tile_max;
+ u32 height, height_align, pitch, pitch_align, depth_align;
+ u64 base_offset, base_align;
+ struct array_mode_checker array_check;
+ int array_mode;
+
if (track->db_bo == NULL) {
dev_warn(p->dev, "z/stencil with no depth buffer\n");
return -EINVAL;
ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF);
} else {
size = radeon_bo_size(track->db_bo);
- pitch = G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1;
+ /* pitch in pixels */
+ pitch = (G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1) * 8;
slice_tile_max = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
slice_tile_max *= 64;
- height = slice_tile_max / (pitch * 8);
+ height = slice_tile_max / pitch;
if (height > 8192)
height = 8192;
- switch (G_028010_ARRAY_MODE(track->db_depth_info)) {
+ base_offset = track->db_bo_mc + track->db_offset;
+ array_mode = G_028010_ARRAY_MODE(track->db_depth_info);
+ array_check.array_mode = array_mode;
+ array_check.group_size = track->group_size;
+ array_check.nbanks = track->nbanks;
+ array_check.npipes = track->npipes;
+ array_check.nsamples = track->nsamples;
+ array_check.bpe = bpe;
+ if (r600_get_array_mode_alignment(&array_check,
+ &pitch_align, &height_align, &depth_align, &base_align)) {
+ dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
+ G_028010_ARRAY_MODE(track->db_depth_info),
+ track->db_depth_info);
+ return -EINVAL;
+ }
+ switch (array_mode) {
case V_028010_ARRAY_1D_TILED_THIN1:
- pitch_align = (max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8);
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
/* don't break userspace */
height &= ~0x7;
- if (!IS_ALIGNED(height, 8)) {
- dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
- __func__, __LINE__, height);
- return -EINVAL;
- }
break;
case V_028010_ARRAY_2D_TILED_THIN1:
- pitch_align = max((u32)track->nbanks,
- (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
- if (!IS_ALIGNED((height / 8), track->npipes)) {
- dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
- __func__, __LINE__, height);
- return -EINVAL;
- }
break;
default:
dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
track->db_depth_info);
return -EINVAL;
}
- if (!IS_ALIGNED(track->db_offset, track->group_size)) {
- dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->db_offset);
+
+ if (!IS_ALIGNED(pitch, pitch_align)) {
+ dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
+ __func__, __LINE__, pitch);
+ return -EINVAL;
+ }
+ if (!IS_ALIGNED(height, height_align)) {
+ dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
+ __func__, __LINE__, height);
return -EINVAL;
}
+ if (!IS_ALIGNED(base_offset, base_align)) {
+ dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+ return -EINVAL;
+ }
+
ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1;
tmp = ntiles * bpe * 64 * nviews;
if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) {
- dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %d have %ld)\n",
+ dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %u have %lu)\n",
track->db_depth_size, ntiles, nviews, bpe, tmp + track->db_offset,
radeon_bo_size(track->db_bo));
return -EINVAL;
ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
track->cb_color_base_last[tmp] = ib[idx];
track->cb_color_bo[tmp] = reloc->robj;
+ track->cb_color_bo_mc[tmp] = reloc->lobj.gpu_offset;
break;
case DB_DEPTH_BASE:
r = r600_cs_packet_next_reloc(p, &reloc);
track->db_offset = radeon_get_ib_value(p, idx) << 8;
ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
track->db_bo = reloc->robj;
+ track->db_bo_mc = reloc->lobj.gpu_offset;
break;
case DB_HTILE_DATA_BASE:
case SQ_PGM_START_FS:
static inline int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
struct radeon_bo *texture,
struct radeon_bo *mipmap,
+ u64 base_offset,
+ u64 mip_offset,
u32 tiling_flags)
{
struct r600_cs_track *track = p->track;
u32 nfaces, nlevels, blevel, w0, h0, d0, bpe = 0;
- u32 word0, word1, l0_size, mipmap_size, pitch, pitch_align;
+ u32 word0, word1, l0_size, mipmap_size;
+ u32 height_align, pitch, pitch_align, depth_align;
+ u64 base_align;
+ struct array_mode_checker array_check;
/* on legacy kernel we don't perform advanced check */
if (p->rdev == NULL)
return 0;
+ /* convert to bytes */
+ base_offset <<= 8;
+ mip_offset <<= 8;
+
word0 = radeon_get_ib_value(p, idx + 0);
if (tiling_flags & RADEON_TILING_MACRO)
word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
return -EINVAL;
}
- pitch = G_038000_PITCH(word0) + 1;
- switch (G_038000_TILE_MODE(word0)) {
- case V_038000_ARRAY_LINEAR_GENERAL:
- pitch_align = 1;
- /* XXX check height align */
- break;
- case V_038000_ARRAY_LINEAR_ALIGNED:
- pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
- /* XXX check height align */
- break;
- case V_038000_ARRAY_1D_TILED_THIN1:
- pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
- /* XXX check height align */
- break;
- case V_038000_ARRAY_2D_TILED_THIN1:
- pitch_align = max((u32)track->nbanks,
- (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
- if (!IS_ALIGNED(pitch, pitch_align)) {
- dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
- __func__, __LINE__, pitch);
- return -EINVAL;
- }
- /* XXX check height align */
- break;
- default:
- dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
- G_038000_TILE_MODE(word0), word0);
+ /* pitch in texels */
+ pitch = (G_038000_PITCH(word0) + 1) * 8;
+ array_check.array_mode = G_038000_TILE_MODE(word0);
+ array_check.group_size = track->group_size;
+ array_check.nbanks = track->nbanks;
+ array_check.npipes = track->npipes;
+ array_check.nsamples = 1;
+ array_check.bpe = bpe;
+ if (r600_get_array_mode_alignment(&array_check,
+ &pitch_align, &height_align, &depth_align, &base_align)) {
+ dev_warn(p->dev, "%s:%d tex array mode (%d) invalid\n",
+ __func__, __LINE__, G_038000_TILE_MODE(word0));
+ return -EINVAL;
+ }
+
+ /* XXX check height as well... */
+
+ if (!IS_ALIGNED(pitch, pitch_align)) {
+ dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+ __func__, __LINE__, pitch);
+ return -EINVAL;
+ }
+ if (!IS_ALIGNED(base_offset, base_align)) {
+ dev_warn(p->dev, "%s:%d tex base offset (0x%llx) invalid\n",
+ __func__, __LINE__, base_offset);
+ return -EINVAL;
+ }
+ if (!IS_ALIGNED(mip_offset, base_align)) {
+ dev_warn(p->dev, "%s:%d tex mip offset (0x%llx) invalid\n",
+ __func__, __LINE__, mip_offset);
return -EINVAL;
}
- /* XXX check offset align */
word0 = radeon_get_ib_value(p, idx + 4);
word1 = radeon_get_ib_value(p, idx + 5);
mip_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
mipmap = reloc->robj;
r = r600_check_texture_resource(p, idx+(i*7)+1,
- texture, mipmap, reloc->lobj.tiling_flags);
+ texture, mipmap,
+ base_offset + radeon_get_ib_value(p, idx+1+(i*7)+2),
+ mip_offset + radeon_get_ib_value(p, idx+1+(i*7)+3),
+ reloc->lobj.tiling_flags);
if (r)
return r;
ib[idx+1+(i*7)+2] += base_offset;
#define R600_HDP_NONSURFACE_BASE 0x2c04
#define R600_BUS_CNTL 0x5420
+# define R600_BIOS_ROM_DIS (1 << 1)
#define R600_CONFIG_CNTL 0x5424
#define R600_CONFIG_MEMSIZE 0x5428
#define R600_CONFIG_F0_BASE 0x542C
#define PTE_READABLE (1 << 5)
#define PTE_WRITEABLE (1 << 6)
+/* tiling bits */
+#define ARRAY_LINEAR_GENERAL 0x00000000
+#define ARRAY_LINEAR_ALIGNED 0x00000001
+#define ARRAY_1D_TILED_THIN1 0x00000002
+#define ARRAY_2D_TILED_THIN1 0x00000004
+
/* Registers */
#define ARB_POP 0x2418
#define ENABLE_TC128 (1 << 30)
(rdev->family == CHIP_RS400) || \
(rdev->family == CHIP_RS480))
#define ASIC_IS_AVIVO(rdev) ((rdev->family >= CHIP_RS600))
+#define ASIC_IS_DCE2(rdev) ((rdev->family == CHIP_RS600) || \
+ (rdev->family == CHIP_RS690) || \
+ (rdev->family == CHIP_RS740) || \
+ (rdev->family >= CHIP_R600))
#define ASIC_IS_DCE3(rdev) ((rdev->family >= CHIP_RV620))
#define ASIC_IS_DCE32(rdev) ((rdev->family >= CHIP_RV730))
#define ASIC_IS_DCE4(rdev) ((rdev->family >= CHIP_CEDAR))
}
}
+ /* some DCE3 boards have bad data for this entry */
+ if (ASIC_IS_DCE3(rdev)) {
+ if ((i == 4) &&
+ (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+ (gpio->sucI2cId.ucAccess == 0x94))
+ gpio->sucI2cId.ucAccess = 0x14;
+ }
+
if (gpio->sucI2cId.ucAccess == id) {
i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
}
}
+ /* some DCE3 boards have bad data for this entry */
+ if (ASIC_IS_DCE3(rdev)) {
+ if ((i == 4) &&
+ (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+ (gpio->sucI2cId.ucAccess == 0x94))
+ gpio->sucI2cId.ucAccess = 0x14;
+ }
+
i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
size = bsize;
n = 1024;
- r = radeon_bo_create(rdev, NULL, size, true, sdomain, &sobj);
+ r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, sdomain, &sobj);
if (r) {
goto out_cleanup;
}
if (r) {
goto out_cleanup;
}
- r = radeon_bo_create(rdev, NULL, size, true, ddomain, &dobj);
+ r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, ddomain, &dobj);
if (r) {
goto out_cleanup;
}
}
return true;
}
+
static bool r700_read_disabled_bios(struct radeon_device *rdev)
{
uint32_t viph_control;
bool r;
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(R600_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
/* disable VIP */
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
(d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
cg_spll_status = RREG32(R600_CG_SPLL_STATUS);
}
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(R600_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
bool r;
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(R600_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
/* disable VIP */
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
(d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
/* restore regs */
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(R600_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
}
if (clk_mask && data_mask) {
+ /* system specific masks */
i2c.mask_clk_mask = clk_mask;
i2c.mask_data_mask = data_mask;
i2c.a_clk_mask = clk_mask;
i2c.en_data_mask = data_mask;
i2c.y_clk_mask = clk_mask;
i2c.y_data_mask = data_mask;
+ } else if ((ddc_line == RADEON_GPIOPAD_MASK) ||
+ (ddc_line == RADEON_MDGPIO_MASK)) {
+ /* default gpiopad masks */
+ i2c.mask_clk_mask = (0x20 << 8);
+ i2c.mask_data_mask = 0x80;
+ i2c.a_clk_mask = (0x20 << 8);
+ i2c.a_data_mask = 0x80;
+ i2c.en_clk_mask = (0x20 << 8);
+ i2c.en_data_mask = 0x80;
+ i2c.y_clk_mask = (0x20 << 8);
+ i2c.y_data_mask = 0x80;
} else {
+ /* default masks for ddc pads */
i2c.mask_clk_mask = RADEON_GPIO_EN_1;
i2c.mask_data_mask = RADEON_GPIO_EN_0;
i2c.a_clk_mask = RADEON_GPIO_A_1;
clk = RBIOS8(offset + 3 + (i * 5) + 3);
data = RBIOS8(offset + 3 + (i * 5) + 4);
i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
- clk, data);
+ (1 << clk), (1 << data));
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
break;
}
static int radeon_dp_get_modes(struct drm_connector *connector)
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
int ret;
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
+ }
ret = radeon_ddc_get_modes(radeon_connector);
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ }
+
return ret;
}
if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
/* eDP is always DP */
radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
if (radeon_dp_getdpcd(radeon_connector))
ret = connector_status_connected;
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_OFF);
} else {
radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector);
if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
1);
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
rdev->mode_info.load_detect_property,
1);
}
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_HDMIA:
case DRM_MODE_CONNECTOR_HDMIB:
0);
}
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
case DRM_MODE_CONNECTOR_eDP:
rdev->mode_info.underscan_vborder_property,
0);
}
+ connector->interlace_allowed = true;
+ /* in theory with a DP to VGA converter... */
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Composite:
radeon_atombios_get_tv_info(rdev));
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_LVDS:
radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
}
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
1);
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
1);
}
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Composite:
radeon_combios_get_tv_info(rdev));
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_LVDS:
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
}
int r;
if (rdev->wb.wb_obj == NULL) {
- r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true,
+ r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, PAGE_SIZE, true,
RADEON_GEM_DOMAIN_GTT, &rdev->wb.wb_obj);
if (r) {
dev_warn(rdev->dev, "(%d) create WB bo failed\n", r);
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
- dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
+ dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
}
mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
- dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
+ dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n",
mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end);
}
radeon_pm_resume(rdev);
radeon_restore_bios_scratch_regs(rdev);
- /* turn on display hw */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
- }
-
radeon_fbdev_set_suspend(rdev, 0);
release_console_sem();
radeon_hpd_init(rdev);
/* blat the mode back in */
drm_helper_resume_force_mode(dev);
+ /* turn on display hw */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+ }
return 0;
}
static struct drm_driver kms_driver;
+static void radeon_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+ struct apertures_struct *ap;
+ bool primary = false;
+
+ ap = alloc_apertures(1);
+ ap->ranges[0].base = pci_resource_start(pdev, 0);
+ ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+#ifdef CONFIG_X86
+ primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+ remove_conflicting_framebuffers(ap, "radeondrmfb", primary);
+ kfree(ap);
+}
+
static int __devinit
radeon_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ /* Get rid of things like offb */
+ radeon_kick_out_firmware_fb(pdev);
+
return drm_get_pci_dev(pdev, ent, &kms_driver);
}
return false;
}
}
+
void
radeon_link_encoder_connector(struct drm_device *dev)
{
return NULL;
}
+struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *other_encoder;
+ struct radeon_encoder *other_radeon_encoder;
+
+ if (radeon_encoder->is_ext_encoder)
+ return NULL;
+
+ list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+ if (other_encoder == encoder)
+ continue;
+ other_radeon_encoder = to_radeon_encoder(other_encoder);
+ if (other_radeon_encoder->is_ext_encoder &&
+ (radeon_encoder->devices & other_radeon_encoder->devices))
+ return other_encoder;
+ }
+ return NULL;
+}
+
void radeon_panel_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
}
-void
-atombios_external_tmds_setup(struct drm_encoder *encoder, int action)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION args;
- int index = 0;
-
- memset(&args, 0, sizeof(args));
-
- index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
-
- args.sXTmdsEncoder.ucEnable = action;
-
- if (radeon_encoder->pixel_clock > 165000)
- args.sXTmdsEncoder.ucMisc = PANEL_ENCODER_MISC_DUAL;
-
- /*if (pScrn->rgbBits == 8)*/
- args.sXTmdsEncoder.ucMisc |= (1 << 1);
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
+union dvo_encoder_control {
+ ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
+ DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
+ DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
+};
-static void
-atombios_ddia_setup(struct drm_encoder *encoder, int action)
+void
+atombios_dvo_setup(struct drm_encoder *encoder, int action)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- DVO_ENCODER_CONTROL_PS_ALLOCATION args;
- int index = 0;
+ union dvo_encoder_control args;
+ int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
memset(&args, 0, sizeof(args));
- index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+ if (ASIC_IS_DCE3(rdev)) {
+ /* DCE3+ */
+ args.dvo_v3.ucAction = action;
+ args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ args.dvo_v3.ucDVOConfig = 0; /* XXX */
+ } else if (ASIC_IS_DCE2(rdev)) {
+ /* DCE2 (pre-DCE3 R6xx, RS600/690/740 */
+ args.dvo.sDVOEncoder.ucAction = action;
+ args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ /* DFP1, CRT1, TV1 depending on the type of port */
+ args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
+
+ if (radeon_encoder->pixel_clock > 165000)
+ args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
+ } else {
+ /* R4xx, R5xx */
+ args.ext_tmds.sXTmdsEncoder.ucEnable = action;
- args.sDVOEncoder.ucAction = action;
- args.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ if (radeon_encoder->pixel_clock > 165000)
+ args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
- if (radeon_encoder->pixel_clock > 165000)
- args.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute = PANEL_ENCODER_MISC_DUAL;
+ /*if (pScrn->rgbBits == 8)*/
+ args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
+ }
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
}
union lvds_encoder_control {
if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
- args.v1.ucMisc |= (1 << 1);
+ args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
} else {
if (dig->linkb)
args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
if (radeon_encoder->pixel_clock > 165000)
args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
/*if (pScrn->rgbBits == 8) */
- args.v1.ucMisc |= (1 << 1);
+ args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
}
break;
case 2:
int
atombios_get_encoder_mode(struct drm_encoder *encoder)
{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector;
struct radeon_connector_atom_dig *dig_connector;
connector = radeon_get_connector_for_encoder(encoder);
- if (!connector)
- return 0;
-
+ if (!connector) {
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ return ATOM_ENCODER_MODE_DVI;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ default:
+ return ATOM_ENCODER_MODE_CRT;
+ }
+ }
radeon_connector = to_radeon_connector(connector);
switch (connector->connector_type) {
memset(&args, 0, sizeof(args));
switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+ break;
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+void
+atombios_set_edp_panel_power(struct drm_connector *connector, int action)
+{
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct drm_device *dev = radeon_connector->base.dev;
+ struct radeon_device *rdev = dev->dev_private;
+ union dig_transmitter_control args;
+ int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+ uint8_t frev, crev;
+
+ if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+ return;
+
+ if (!ASIC_IS_DCE4(rdev))
+ return;
+
+ if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) ||
+ (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
+ return;
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ memset(&args, 0, sizeof(args));
+
+ args.v1.ucAction = action;
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+union external_encoder_control {
+ EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
+};
+
+static void
+atombios_external_encoder_setup(struct drm_encoder *encoder,
+ struct drm_encoder *ext_encoder,
+ int action)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ union external_encoder_control args;
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
+ u8 frev, crev;
+ int dp_clock = 0;
+ int dp_lane_count = 0;
+ int connector_object_id = 0;
+
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *dig_connector =
+ radeon_connector->con_priv;
+
+ dp_clock = dig_connector->dp_clock;
+ dp_lane_count = dig_connector->dp_lane_count;
+ connector_object_id =
+ (radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+ }
+
+ memset(&args, 0, sizeof(args));
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ /* no params on frev 1 */
+ break;
+ case 2:
+ switch (crev) {
+ case 1:
+ case 2:
+ args.v1.sDigEncoder.ucAction = action;
+ args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+ if (args.v1.sDigEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
+ if (dp_clock == 270000)
+ args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+ args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
+ } else if (radeon_encoder->pixel_clock > 165000)
+ args.v1.sDigEncoder.ucLaneNum = 8;
+ else
+ args.v1.sDigEncoder.ucLaneNum = 4;
+ break;
+ default:
+ DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+ return;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+ return;
+ }
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
static void
atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
int index = 0;
bool is_dig = false;
break;
case ENCODER_OBJECT_ID_INTERNAL_DVO1:
case ENCODER_OBJECT_ID_INTERNAL_DDI:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
break;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ if (ASIC_IS_DCE3(rdev))
+ is_dig = true;
+ else
+ index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+ break;
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
break;
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ if (connector &&
+ (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *radeon_dig_connector =
+ radeon_connector->con_priv;
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
+ radeon_dig_connector->edp_on = true;
+ }
dp_link_train(encoder, connector);
if (ASIC_IS_DCE4(rdev))
atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
}
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
if (ASIC_IS_DCE4(rdev))
atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF);
+ if (connector &&
+ (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *radeon_dig_connector =
+ radeon_connector->con_priv;
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ radeon_dig_connector->edp_on = false;
+ }
}
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
break;
}
} else {
switch (mode) {
case DRM_MODE_DPMS_ON:
args.ucAction = ATOM_ENABLE;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ args.ucAction = ATOM_LCD_BLON;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ }
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
args.ucAction = ATOM_DISABLE;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ args.ucAction = ATOM_LCD_BLOFF;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ }
break;
}
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+
+ if (ext_encoder) {
+ int action;
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ default:
+ action = ATOM_ENABLE;
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ action = ATOM_DISABLE;
+ break;
+ }
+ atombios_external_encoder_setup(encoder, ext_encoder, action);
+ }
+
radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
}
break;
default:
DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
- break;
+ return;
}
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
radeon_encoder->pixel_clock = adjusted_mode->clock;
}
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
- atombios_ddia_setup(encoder, ATOM_ENABLE);
- break;
case ENCODER_OBJECT_ID_INTERNAL_DVO1:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+ atombios_dvo_setup(encoder, ATOM_ENABLE);
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC1:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
}
break;
}
+
+ if (ext_encoder) {
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+ }
+
atombios_apply_encoder_quirks(encoder, adjusted_mode);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
}
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
- atombios_ddia_setup(encoder, ATOM_DISABLE);
- break;
case ENCODER_OBJECT_ID_INTERNAL_DVO1:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- atombios_external_tmds_setup(encoder, ATOM_DISABLE);
+ atombios_dvo_setup(encoder, ATOM_DISABLE);
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC1:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
radeon_encoder->active_device = 0;
}
+/* these are handled by the primary encoders */
+static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
+{
+
+}
+
+static void radeon_atom_ext_commit(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+
+}
+
+static void radeon_atom_ext_disable(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
+{
+
+}
+
+static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
+ .dpms = radeon_atom_ext_dpms,
+ .mode_fixup = radeon_atom_ext_mode_fixup,
+ .prepare = radeon_atom_ext_prepare,
+ .mode_set = radeon_atom_ext_mode_set,
+ .commit = radeon_atom_ext_commit,
+ .disable = radeon_atom_ext_disable,
+ /* no detect for TMDS/LVDS yet */
+};
+
static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
.dpms = radeon_atom_encoder_dpms,
.mode_fixup = radeon_atom_mode_fixup,
radeon_encoder->devices = supported_device;
radeon_encoder->rmx_type = RMX_OFF;
radeon_encoder->underscan_type = UNDERSCAN_OFF;
+ radeon_encoder->is_ext_encoder = false;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
radeon_encoder->rmx_type = RMX_FULL;
drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+ } else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+ radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
} else {
drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
}
drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
break;
+ case ENCODER_OBJECT_ID_SI170B:
+ case ENCODER_OBJECT_ID_CH7303:
+ case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
+ case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
+ case ENCODER_OBJECT_ID_TITFP513:
+ case ENCODER_OBJECT_ID_VT1623:
+ case ENCODER_OBJECT_ID_HDMI_SI1930:
+ /* these are handled by the primary encoders */
+ radeon_encoder->is_ext_encoder = true;
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+ else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+ else
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
+ break;
}
}
goto out_unref;
}
info->apertures->ranges[0].base = rdev->ddev->mode_config.fb_base;
- info->apertures->ranges[0].size = rdev->mc.real_vram_size;
+ info->apertures->ranges[0].size = rdev->mc.aper_size;
info->fix.mmio_start = 0;
info->fix.mmio_len = 0;
if (rdev->gart.table.vram.robj == NULL) {
r = radeon_bo_create(rdev, NULL, rdev->gart.table_size,
- true, RADEON_GEM_DOMAIN_VRAM,
- &rdev->gart.table.vram.robj);
+ PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+ &rdev->gart.table.vram.robj);
if (r) {
return r;
}
if (alignment < PAGE_SIZE) {
alignment = PAGE_SIZE;
}
- r = radeon_bo_create(rdev, gobj, size, kernel, initial_domain, &robj);
+ r = radeon_bo_create(rdev, gobj, size, alignment, kernel, initial_domain, &robj);
if (r) {
if (r != -ERESTARTSYS)
DRM_ERROR("Failed to allocate GEM object (%d, %d, %u, %d)\n",
((rdev->family <= CHIP_RS480) ||
((rdev->family >= CHIP_RV515) && (rdev->family <= CHIP_R580))))) {
/* set the radeon hw i2c adapter */
- sprintf(i2c->adapter.name, "Radeon i2c hw bus %s", name);
+ snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+ "Radeon i2c hw bus %s", name);
i2c->adapter.algo = &radeon_i2c_algo;
ret = i2c_add_adapter(&i2c->adapter);
if (ret) {
}
} else {
/* set the radeon bit adapter */
- sprintf(i2c->adapter.name, "Radeon i2c bit bus %s", name);
+ snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+ "Radeon i2c bit bus %s", name);
i2c->adapter.algo_data = &i2c->algo.bit;
i2c->algo.bit.pre_xfer = pre_xfer;
i2c->algo.bit.post_xfer = post_xfer;
i2c->rec = *rec;
i2c->adapter.owner = THIS_MODULE;
i2c->dev = dev;
+ snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+ "Radeon aux bus %s", name);
i2c_set_adapdata(&i2c->adapter, i2c);
i2c->adapter.algo_data = &i2c->algo.dp;
i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch;
default:
DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
crtc);
- return EINVAL;
+ return -EINVAL;
}
} else {
switch (crtc) {
default:
DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
crtc);
- return EINVAL;
+ return -EINVAL;
}
}
if (rdev->is_atom_bios) {
radeon_encoder->pixel_clock = adjusted_mode->clock;
- atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+ atombios_dvo_setup(encoder, ATOM_ENABLE);
fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
} else {
fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
int hdmi_config_offset;
int hdmi_audio_workaround;
int hdmi_buffer_status;
+ bool is_ext_encoder;
};
struct radeon_connector_atom_dig {
u8 dp_sink_type;
int dp_clock;
int dp_lane_count;
+ bool edp_on;
};
struct radeon_gpio_rec {
struct drm_encoder *radeon_encoder_legacy_tv_dac_add(struct drm_device *dev, int bios_index, int with_tv);
struct drm_encoder *radeon_encoder_legacy_tmds_int_add(struct drm_device *dev, int bios_index);
struct drm_encoder *radeon_encoder_legacy_tmds_ext_add(struct drm_device *dev, int bios_index);
-extern void atombios_external_tmds_setup(struct drm_encoder *encoder, int action);
+extern void atombios_dvo_setup(struct drm_encoder *encoder, int action);
extern void atombios_digital_setup(struct drm_encoder *encoder, int action);
extern int atombios_get_encoder_mode(struct drm_encoder *encoder);
+extern void atombios_set_edp_panel_power(struct drm_connector *connector, int action);
extern void radeon_encoder_set_active_device(struct drm_encoder *encoder);
extern void radeon_crtc_load_lut(struct drm_crtc *crtc);
u32 c = 0;
rbo->placement.fpfn = 0;
- rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
+ rbo->placement.lpfn = 0;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
}
int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
- unsigned long size, bool kernel, u32 domain,
- struct radeon_bo **bo_ptr)
+ unsigned long size, int byte_align, bool kernel, u32 domain,
+ struct radeon_bo **bo_ptr)
{
struct radeon_bo *bo;
enum ttm_bo_type type;
+ unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long max_size = 0;
int r;
if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
}
*bo_ptr = NULL;
+ /* maximun bo size is the minimun btw visible vram and gtt size */
+ max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+ if ((page_align << PAGE_SHIFT) >= max_size) {
+ printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
+ __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20);
+ return -ENOMEM;
+ }
+
retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
/* Kernel allocation are uninterruptible */
mutex_lock(&rdev->vram_mutex);
r = ttm_bo_init(&rdev->mman.bdev, &bo->tbo, size, type,
- &bo->placement, 0, 0, !kernel, NULL, size,
+ &bo->placement, page_align, 0, !kernel, NULL, size,
&radeon_ttm_bo_destroy);
mutex_unlock(&rdev->vram_mutex);
if (unlikely(r != 0)) {
}
extern int radeon_bo_create(struct radeon_device *rdev,
- struct drm_gem_object *gobj, unsigned long size,
- bool kernel, u32 domain,
- struct radeon_bo **bo_ptr);
+ struct drm_gem_object *gobj, unsigned long size,
+ int byte_align,
+ bool kernel, u32 domain,
+ struct radeon_bo **bo_ptr);
extern int radeon_bo_kmap(struct radeon_bo *bo, void **ptr);
extern void radeon_bo_kunmap(struct radeon_bo *bo);
extern void radeon_bo_unref(struct radeon_bo **bo);
INIT_LIST_HEAD(&rdev->ib_pool.bogus_ib);
/* Allocate 1M object buffer */
r = radeon_bo_create(rdev, NULL, RADEON_IB_POOL_SIZE*64*1024,
- true, RADEON_GEM_DOMAIN_GTT,
- &rdev->ib_pool.robj);
+ PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT,
+ &rdev->ib_pool.robj);
if (r) {
DRM_ERROR("radeon: failed to ib pool (%d).\n", r);
return r;
rdev->cp.ring_size = ring_size;
/* Allocate ring buffer */
if (rdev->cp.ring_obj == NULL) {
- r = radeon_bo_create(rdev, NULL, rdev->cp.ring_size, true,
+ r = radeon_bo_create(rdev, NULL, rdev->cp.ring_size, PAGE_SIZE, true,
RADEON_GEM_DOMAIN_GTT,
&rdev->cp.ring_obj);
if (r) {
goto out_cleanup;
}
- r = radeon_bo_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+ r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
&vram_obj);
if (r) {
DRM_ERROR("Failed to create VRAM object\n");
void **gtt_start, **gtt_end;
void **vram_start, **vram_end;
- r = radeon_bo_create(rdev, NULL, size, true,
+ r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true,
RADEON_GEM_DOMAIN_GTT, gtt_obj + i);
if (r) {
DRM_ERROR("Failed to create GTT object %d\n", i);
DRM_ERROR("Failed initializing VRAM heap.\n");
return r;
}
- r = radeon_bo_create(rdev, NULL, 256 * 1024, true,
+ r = radeon_bo_create(rdev, NULL, 256 * 1024, PAGE_SIZE, true,
RADEON_GEM_DOMAIN_VRAM,
&rdev->stollen_vga_memory);
if (r) {
if (rdev->vram_scratch.robj == NULL) {
r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE,
- true, RADEON_GEM_DOMAIN_VRAM,
- &rdev->vram_scratch.robj);
+ PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+ &rdev->vram_scratch.robj);
if (r) {
return r;
}
int ret;
while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) {
+ /**
+ * Deadlock avoidance for multi-bo reserving.
+ */
if (use_sequence && bo->seq_valid &&
(sequence - bo->val_seq < (1 << 31))) {
return -EAGAIN;
}
if (use_sequence) {
+ /**
+ * Wake up waiters that may need to recheck for deadlock,
+ * if we decreased the sequence number.
+ */
+ if (unlikely((bo->val_seq - sequence < (1 << 31))
+ || !bo->seq_valid))
+ wake_up_all(&bo->event_queue);
+
bo->val_seq = sequence;
bo->seq_valid = true;
} else {
&vmw_vram_sys_placement, true,
&vmw_user_dmabuf_destroy);
if (unlikely(ret != 0))
- return ret;
+ goto out_no_dmabuf;
tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
false,
ttm_buffer_type,
&vmw_user_dmabuf_release, NULL);
- if (unlikely(ret != 0)) {
- ttm_bo_unref(&tmp);
- } else {
+ if (unlikely(ret != 0))
+ goto out_no_base_object;
+ else {
rep->handle = vmw_user_bo->base.hash.key;
rep->map_handle = vmw_user_bo->dma.base.addr_space_offset;
rep->cur_gmr_id = vmw_user_bo->base.hash.key;
rep->cur_gmr_offset = 0;
}
- ttm_bo_unref(&tmp);
+out_no_base_object:
+ ttm_bo_unref(&tmp);
+out_no_dmabuf:
ttm_read_unlock(&vmaster->lock);
- return 0;
+ return ret;
}
int vmw_dmabuf_unref_ioctl(struct drm_device *dev, void *data,
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
struct egalax_data *td;
struct hid_report *report;
- td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+ td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate eGalax data\n");
return -ENOMEM;
clear_bit(*old_keycode, dev->keybit);
set_bit(usage->code, dev->keybit);
- dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+ dbg_hid("Assigned keycode %d to HID usage code %x\n",
usage->code, usage->hid);
/*
*
* as seen in the HID specification v1.11 6.2.2.7 Global Items.
*
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
*/
static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
{
*/
if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
if (field->unit == 0x11) { /* If centimeters */
- /* Convert to inches */
- prev = logical_extents;
- logical_extents *= 254;
- if (logical_extents < prev)
+ /* Convert to millimeters */
+ unit_exponent += 1;
+ } else if (field->unit == 0x13) { /* If inches */
+ /* Convert to millimeters */
+ prev = physical_extents;
+ physical_extents *= 254;
+ if (physical_extents < prev)
return 0;
- unit_exponent += 2;
- } else if (field->unit != 0x13) { /* If not inches */
+ unit_exponent -= 1;
+ } else {
return 0;
}
} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
.driver_data = (unsigned long)ff_joystick },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */
.driver_data = (unsigned long)ff_joystick },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a), /* F430 Force Feedback Wheel */
+ .driver_data = (unsigned long)ff_joystick },
{ }
};
MODULE_DEVICE_TABLE(hid, tm_devices);
#include <linux/hid.h>
#include <linux/mutex.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/hidraw.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
int nr = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
- int val, orig_div, new_div, shift;
+ int val, orig_div, new_div;
val = simple_strtol(buf, NULL, 10);
new_div = DIV_TO_REG(val);
- if (new_div == 0) {
- return -EINVAL;
- }
+
mutex_lock(&data->update_lock);
orig_div = data->fan_div[nr];
data->fan_div[nr] = DIV_FROM_REG(new_div);
if (nr < 4) { /* 0 <= nr < 4 */
- shift = 2 * nr;
adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
- ((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
- (new_div << shift)));
+ (DIV_TO_REG(data->fan_div[0]) << 0) |
+ (DIV_TO_REG(data->fan_div[1]) << 2) |
+ (DIV_TO_REG(data->fan_div[2]) << 4) |
+ (DIV_TO_REG(data->fan_div[3]) << 6));
} else { /* 3 < nr < 8 */
- shift = 2 * (nr - 4);
adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
- ((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
- (new_div << shift)));
+ (DIV_TO_REG(data->fan_div[4]) << 0) |
+ (DIV_TO_REG(data->fan_div[5]) << 2) |
+ (DIV_TO_REG(data->fan_div[6]) << 4) |
+ (DIV_TO_REG(data->fan_div[7]) << 6));
}
if (data->fan_div[nr] != orig_div) {
Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
Based on max6650.c:
- Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
0
};
+#ifdef MODULE
static struct pci_device_id i5k_amb_ids[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
+#endif
static int __devinit i5k_amb_probe(struct platform_device *pdev)
{
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8)
#define IT87_REG_VIN(nr) (0x20 + (nr))
#define IT87_REG_TEMP(nr) (0x29 + (nr))
u8 fan_main_ctrl; /* Register value */
u8 fan_ctl; /* Register value */
- /* The following 3 arrays correspond to the same registers. The
- * meaning of bits 6-0 depends on the value of bit 7, and we want
- * to preserve settings on mode changes, so we have to track all
- * values separately. */
+ /* The following 3 arrays correspond to the same registers up to
+ * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+ * 7, and we want to preserve settings on mode changes, so we have
+ * to track all values separately.
+ * Starting with the IT8721F, the manual PWM duty cycles are stored
+ * in separate registers (8-bit values), so the separate tracking
+ * is no longer needed, but it is still done to keep the driver
+ * simple. */
u8 pwm_ctrl[3]; /* Register value */
- u8 pwm_duty[3]; /* Manual PWM value set by user (bit 6-0) */
+ u8 pwm_duty[3]; /* Manual PWM value set by user */
u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */
/* Automatic fan speed control registers */
data->fan_main_ctrl);
} else {
if (val == 1) /* Manual mode */
- data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ data->pwm_ctrl[nr] = data->type == it8721 ?
+ data->pwm_temp_map[nr] :
+ data->pwm_duty[nr];
else /* Automatic mode */
data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
return -EINVAL;
mutex_lock(&data->update_lock);
- data->pwm_duty[nr] = pwm_to_reg(data, val);
- /* If we are in manual mode, write the duty cycle immediately;
- * otherwise, just store it for later use. */
- if (!(data->pwm_ctrl[nr] & 0x80)) {
- data->pwm_ctrl[nr] = data->pwm_duty[nr];
- it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+ if (data->type == it8721) {
+ /* If we are in automatic mode, the PWM duty cycle register
+ * is read-only so we can't write the value */
+ if (data->pwm_ctrl[nr] & 0x80) {
+ mutex_unlock(&data->update_lock);
+ return -EBUSY;
+ }
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+ data->pwm_duty[nr]);
+ } else {
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ /* If we are in manual mode, write the duty cycle immediately;
+ * otherwise, just store it for later use. */
+ if (!(data->pwm_ctrl[nr] & 0x80)) {
+ data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ it87_write_value(data, IT87_REG_PWM(nr),
+ data->pwm_ctrl[nr]);
+ }
}
mutex_unlock(&data->update_lock);
return count;
* channels to use when later setting to automatic mode later.
* Use a 1:1 mapping by default (we are clueless.)
* In both cases, the value can (and should) be changed by the user
- * prior to switching to a different mode. */
+ * prior to switching to a different mode.
+ * Note that this is no longer needed for the IT8721F and later, as
+ * these have separate registers for the temperature mapping and the
+ * manual duty cycle. */
for (i = 0; i < 3; i++) {
data->pwm_temp_map[i] = i;
data->pwm_duty[i] = 0x7f; /* Full speed */
static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
{
data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
- if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ if (data->type == it8721) {
data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
- else /* Manual mode */
- data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ data->pwm_duty[nr] = it87_read_value(data,
+ IT87_REG_PWM_DUTY(nr));
+ } else {
+ if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+ else /* Manual mode */
+ data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ }
if (has_old_autopwm(data)) {
int i;
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int lis3lv02d_i2c_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
return 0;
}
-#else
-#define lis3lv02d_i2c_suspend NULL
-#define lis3lv02d_i2c_resume NULL
-#define lis3lv02d_i2c_shutdown NULL
-#endif
+#endif /* CONFIG_PM_SLEEP */
+#ifdef CONFIG_PM_RUNTIME
static int lis3_i2c_runtime_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
lis3lv02d_poweron(lis3);
return 0;
}
+#endif /* CONFIG_PM_RUNTIME */
static const struct i2c_device_id lis3lv02d_id[] = {
{"lis3lv02d", 0 },
Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
- Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+ Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
This program is free software; you can redistribute it and/or modify
}
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
- "Hans J. Koch <hjk@linutronix.de");
+ "Hans J. Koch <hjk@hansjkoch.de>");
MODULE_DESCRIPTION("LM93 driver");
MODULE_LICENSE("GPL");
{
struct i2c_client *client = to_i2c_client(dev);
struct lm95241_data *data = i2c_get_clientdata(client);
+ unsigned long val;
- strict_strtol(buf, 10, &data->interval);
- data->interval = data->interval * HZ / 1000;
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ data->interval = val * HZ / 1000;
return count;
}
struct lm95241_data *data = i2c_get_clientdata(client); \
\
long val; \
- strict_strtol(buf, 10, &val); \
+\
+ if (strict_strtol(buf, 10, &val) < 0) \
+ return -EINVAL; \
\
if ((val == 1) || (val == 2)) { \
\
struct lm95241_data *data = i2c_get_clientdata(client); \
\
long val; \
- strict_strtol(buf, 10, &val); \
+\
+ if (strict_strtol(buf, 10, &val) < 0) \
+ return -EINVAL;\
\
mutex_lock(&data->update_lock); \
\
struct lm95241_data *data = i2c_get_clientdata(client); \
\
long val; \
- strict_strtol(buf, 10, &val); \
+\
+ if (strict_strtol(buf, 10, &val) < 0) \
+ return -EINVAL; \
\
mutex_lock(&data->update_lock); \
\
/* Power (virtual) */
LTC4215_POWER(power1_input);
-LTC4215_ALARM(power1_alarm, (1 << 3), LTC4215_STATUS);
/* Input Voltage */
LTC4215_VOLTAGE(in1_input, LTC4215_ADIN);
/* Output Voltage */
LTC4215_VOLTAGE(in2_input, LTC4215_SOURCE);
+LTC4215_ALARM(in2_min_alarm, (1 << 3), LTC4215_STATUS);
/* Finally, construct an array of pointers to members of the above objects,
* as required for sysfs_create_group()
&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
- &sensor_dev_attr_power1_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min_alarm.dev_attr.attr,
NULL,
};
* max6650.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring.
*
- * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
*
* based on code written by John Morris <john.morris@spirentcom.com>
* Copyright (c) 2003 Spirent Communications
attr->index = channel;
attr->dev_attr.attr.name = attrs->in_name;
attr->dev_attr.attr.mode = S_IRUGO;
- attr->dev_attr.attr.owner = THIS_MODULE;
attr->dev_attr.show = s3c_hwmon_ch_show;
ret = device_create_file(dev, &attr->dev_attr);
attr->index = channel;
attr->dev_attr.attr.name = attrs->label_name;
attr->dev_attr.attr.mode = S_IRUGO;
- attr->dev_attr.attr.owner = THIS_MODULE;
attr->dev_attr.show = s3c_hwmon_label_show;
ret = device_create_file(dev, &attr->dev_attr);
#define W83795_REG_VID_CTRL 0x6A
+#define W83795_REG_ALARM_CTRL 0x40
+#define ALARM_CTRL_RTSACS (1 << 7)
#define W83795_REG_ALARM(index) (0x41 + (index))
+#define W83795_REG_CLR_CHASSIS 0x4D
#define W83795_REG_BEEP(index) (0x50 + (index))
-#define W83795_REG_CLR_CHASSIS 0x4D
+#define W83795_REG_OVT_CFG 0x58
+#define OVT_CFG_SEL (1 << 7)
#define W83795_REG_FCMS1 0x201
#define W83795_REG_TSS(index) (0x209 + (index))
+#define TSS_MAP_RESERVED 0xff
+static const u8 tss_map[4][6] = {
+ { 0, 1, 2, 3, 4, 5},
+ { 6, 7, 8, 9, 0, 1},
+ {10, 11, 12, 13, 2, 3},
+ { 4, 5, 4, 5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
#define PWM_OUTPUT 0
#define PWM_FREQ 1
#define PWM_START 2
u8 setup_pwm[3]; /* Register value */
u8 alarms[6]; /* Register value */
+ u8 enable_beep;
u8 beeps[6]; /* Register value */
char valid;
}
/* Read beep settings */
- for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
- data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+ data->beeps[i] =
+ w83795_read(client, W83795_REG_BEEP(i));
+ }
data->valid_limits = 1;
}
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
u16 tmp;
+ u8 intrusion;
int i;
mutex_lock(&data->update_lock);
w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
}
- /* update alarm */
+ /* Update intrusion and alarms
+ * It is important to read intrusion first, because reading from
+ * register SMI STS6 clears the interrupt status temporarily. */
+ tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+ /* Switch to interrupt status for intrusion if needed */
+ if (tmp & ALARM_CTRL_RTSACS)
+ w83795_write(client, W83795_REG_ALARM_CTRL,
+ tmp & ~ALARM_CTRL_RTSACS);
+ intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+ /* Switch to real-time alarms */
+ w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+ data->alarms[5] |= intrusion;
+ /* Restore original configuration if needed */
+ if (!(tmp & ALARM_CTRL_RTSACS))
+ w83795_write(client, W83795_REG_ALARM_CTRL,
+ tmp & ~ALARM_CTRL_RTSACS);
data->last_updated = jiffies;
data->valid = 1;
val = w83795_read(client, W83795_REG_CLR_CHASSIS);
val |= 0x80;
w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+ /* Clear status and force cache refresh */
+ w83795_read(client, W83795_REG_ALARM(5));
+ data->valid = 0;
mutex_unlock(&data->update_lock);
return count;
}
int index = sensor_attr->index;
u8 tmp;
- if (1 == (data->pwm_fcms[0] & (1 << index))) {
+ /* Speed cruise mode */
+ if (data->pwm_fcms[0] & (1 << index)) {
tmp = 2;
goto out;
}
+ /* Thermal cruise or SmartFan IV mode */
for (tmp = 0; tmp < 6; tmp++) {
if (data->pwm_tfmr[tmp] & (1 << index)) {
tmp = 3;
goto out;
}
}
- if (data->pwm_fomc & (1 << index))
- tmp = 0;
- else
- tmp = 1;
+ /* Manual mode */
+ tmp = 1;
out:
return sprintf(buf, "%u\n", tmp);
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
- if (val > 2)
+ if (val < 1 || val > 2)
return -EINVAL;
mutex_lock(&data->update_lock);
switch (val) {
- case 0:
case 1:
+ /* Clear speed cruise mode bits */
data->pwm_fcms[0] &= ~(1 << index);
w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+ /* Clear thermal cruise mode bits */
for (i = 0; i < 6; i++) {
data->pwm_tfmr[i] &= ~(1 << index);
w83795_write(client, W83795_REG_TFMR(i),
data->pwm_tfmr[i]);
}
- data->pwm_fomc |= 1 << index;
- data->pwm_fomc ^= val << index;
- w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
break;
case 2:
data->pwm_fcms[0] |= (1 << index);
return count;
}
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ int index = to_sensor_dev_attr_2(attr)->index;
+ unsigned int mode;
+
+ if (data->pwm_fomc & (1 << index))
+ mode = 0; /* DC */
+ else
+ mode = 1; /* PWM */
+
+ return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+ int useful = 0, i;
+
+ for (i = 0; i < 4; i++) {
+ if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+ continue;
+ if (tss_map[i][tsrc] < 6) /* Analog */
+ useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+ else /* Digital */
+ useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+ }
+
+ return useful;
+}
+
static ssize_t
show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
{
to_sensor_dev_attr_2(attr);
struct w83795_data *data = w83795_update_pwm_config(dev);
int index = sensor_attr->index;
- u8 val = index / 2;
- u8 tmp = data->temp_src[val];
+ u8 tmp = data->temp_src[index / 2];
if (index & 1)
- val = 4;
+ tmp >>= 4; /* Pick high nibble */
else
- val = 0;
- tmp >>= val;
- tmp &= 0x0f;
+ tmp &= 0x0f; /* Pick low nibble */
- return sprintf(buf, "%u\n", tmp);
+ /* Look-up the actual temperature channel number */
+ if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+ return -EINVAL; /* Shouldn't happen */
+
+ return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
}
static ssize_t
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
- unsigned long tmp;
+ int tmp;
+ unsigned long channel;
u8 val = index / 2;
- if (strict_strtoul(buf, 10, &tmp) < 0)
+ if (strict_strtoul(buf, 10, &channel) < 0 ||
+ channel < 1 || channel > 14)
+ return -EINVAL;
+
+ /* Check if request can be fulfilled */
+ for (tmp = 0; tmp < 4; tmp++) {
+ if (tss_map[tmp][index] == channel - 1)
+ break;
+ }
+ if (tmp == 4) /* No match */
return -EINVAL;
- tmp = SENSORS_LIMIT(tmp, 0, 15);
mutex_lock(&data->update_lock);
if (index & 1) {
#define NOT_USED -1
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
* somewhere else in the code */
#define SENSOR_ATTR_IN(index) { \
SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + ((index > 14) ? 1 : 0)) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_FAN(index) { \
SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
NULL, FAN_INPUT, index - 1), \
show_pwm, store_pwm, PWM_FREQ, index - 1), \
SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO, \
+ show_pwm_mode, NULL, NOT_USED, index - 1), \
SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
show_fanin, store_fanin, FANIN_TARGET, index - 1) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_DTS(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \
show_dts_mode, NULL, NOT_USED, index - 7), \
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_TEMP(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + (index > 4 ? 11 : 17)), \
- SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO, \
- show_temp_src, store_temp_src, NOT_USED, index - 1), \
SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
show_temp_pwm_enable, store_temp_pwm_enable, \
TEMP_PWM_ENABLE, index - 1), \
SENSOR_ATTR_FAN(14),
};
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
SENSOR_ATTR_TEMP(1),
SENSOR_ATTR_TEMP(2),
SENSOR_ATTR_TEMP(3),
SENSOR_ATTR_DTS(14),
};
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
SENSOR_ATTR_PWM(1),
SENSOR_ATTR_PWM(2),
SENSOR_ATTR_PWM(3),
SENSOR_ATTR_PWM(8),
};
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+ SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 0),
+ SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 1),
+ SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 2),
+ SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 3),
+ SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 4),
+ SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
static const struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 46),
- SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
- store_beep, BEEP_ENABLE, 46),
- SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
- store_beep, BEEP_ENABLE, 47),
#ifdef CONFIG_SENSORS_W83795_FANCTRL
SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
store_fanin, FANIN_TOL, NOT_USED),
#endif
};
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+ SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 46),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 47),
+};
+
/*
* Driver interface
*/
if (!(data->has_in & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+ if (j == 4 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_in[i][j].dev_attr);
if (err)
return err;
if (!(data->has_fan & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+ if (j == 3 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_fan[i][j].dev_attr);
if (err)
return err;
}
}
+ for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+ j = w83795_tss_useful(data, i);
+ if (!j)
+ continue;
+ err = fn(dev, &w83795_tss[i].dev_attr);
+ if (err)
+ return err;
+ }
+
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
err = fn(dev, &sda_single_files[i].dev_attr);
if (err)
return err;
}
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+ err = fn(dev, &sda_beep_files[i].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
#ifdef CONFIG_SENSORS_W83795_FANCTRL
for (i = 0; i < data->has_pwm; i++) {
for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
#else
for (j = 0; j < 8; j++) {
#endif
+ if (j == 7 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_temp[i][j].dev_attr);
if (err)
return err;
if (!(data->has_dts & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+ if (j == 7 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_dts[i][j].dev_attr);
if (err)
return err;
else
data->has_pwm = 2;
+ /* Check if BEEP pin is available */
+ if (data->chip_type == w83795g) {
+ /* The W83795G has a dedicated BEEP pin */
+ data->enable_beep = 1;
+ } else {
+ /* The W83795ADG has a shared pin for OVT# and BEEP, so you
+ * can't have both */
+ tmp = w83795_read(client, W83795_REG_OVT_CFG);
+ if ((tmp & OVT_CFG_SEL) == 0)
+ data->enable_beep = 1;
+ }
+
err = w83795_handle_files(dev, device_create_file);
if (err)
goto exit_remove;
In doubt, say Y.
config I2C_SMBUS
- tristate
- prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
#
menu "I2C Algorithms"
- depends on !I2C_HELPER_AUTO
+ visible if !I2C_HELPER_AUTO
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
tristate "I2C PCA 9564 interfaces"
endmenu
-
-# In automatic configuration mode, we still have to define the
-# symbols to avoid unmet dependencies.
-
-if I2C_HELPER_AUTO
-config I2C_ALGOBIT
- tristate
-config I2C_ALGOPCF
- tristate
-config I2C_ALGOPCA
- tristate
-endif
/* Initialize struct members */
snprintf(mrst->adap.name, sizeof(mrst->adap.name),
- "MRST/Medfield I2C at %lx", start);
+ "Intel MID I2C at %lx", start);
mrst->adap.owner = THIS_MODULE;
mrst->adap.algo = &intel_mid_i2c_algorithm;
mrst->adap.dev.parent = &dev->dev;
goto out_list;
}
+ /* Sanity checks */
+ if (unlikely(adap->name[0] == '\0')) {
+ pr_err("i2c-core: Attempt to register an adapter with "
+ "no name!\n");
+ return -EINVAL;
+ }
+ if (unlikely(!adap->algo)) {
+ pr_err("i2c-core: Attempt to register adapter '%s' with "
+ "no algo!\n", adap->name);
+ return -EINVAL;
+ }
+
rt_mutex_init(&adap->bus_lock);
mutex_init(&adap->userspace_clients_lock);
INIT_LIST_HEAD(&adap->userspace_clients);
snprintf(priv->adap.name, sizeof(priv->adap.name),
"i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
priv->adap.owner = THIS_MODULE;
- priv->adap.id = parent->id;
priv->adap.algo = &priv->algo;
priv->adap.algo_data = priv;
priv->adap.dev.parent = &parent->dev;
pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
- if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
- lapic_timer_reliable_states = 0xFFFFFFFF;
if (boot_cpu_data.x86 != 6) /* family 6 */
return -ENODEV;
case 0x1F: /* Core i7 and i5 Processor - Nehalem */
case 0x2E: /* Nehalem-EX Xeon */
case 0x2F: /* Westmere-EX Xeon */
- lapic_timer_reliable_states = (1 << 1); /* C1 */
-
case 0x25: /* Westmere */
case 0x2C: /* Westmere */
cpuidle_state_table = nehalem_cstates;
case 0x1C: /* 28 - Atom Processor */
case 0x26: /* 38 - Lincroft Atom Processor */
- lapic_timer_reliable_states = (1 << 1); /* C1 */
cpuidle_state_table = atom_cstates;
break;
case 0x2D: /* SNB Xeon */
cpuidle_state_table = snb_cstates;
break;
-#ifdef FUTURE_USE
- case 0x17: /* 23 - Core 2 Duo */
- lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
-#endif
default:
pr_debug(PREFIX "does not run on family %d model %d\n",
return -ENODEV;
}
+ if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
+ lapic_timer_reliable_states = 0xFFFFFFFF;
+
pr_debug(PREFIX "v" INTEL_IDLE_VERSION
" model 0x%X\n", boot_cpu_data.x86_model);
}
EXPORT_SYMBOL(ib_ud_header_init);
-/**
- * ib_lrh_header_pack - Pack LRH header struct into wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_pack() packs the LRH header structure @lrh into
- * wire format in the buffer @buf.
- */
-int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf)
-{
- ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_pack);
-
-/**
- * ib_lrh_header_unpack - Unpack LRH structure from wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_unpack() unpacks the LRH header structure from
- * wire format (in buf) into @lrh.
- */
-int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh)
-{
- ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_unpack);
-
/**
* ib_ud_header_pack - Pack UD header struct into wire format
* @header:UD header struct
return ret ? ret : in_len;
}
+static int copy_wc_to_user(void __user *dest, struct ib_wc *wc)
+{
+ struct ib_uverbs_wc tmp;
+
+ tmp.wr_id = wc->wr_id;
+ tmp.status = wc->status;
+ tmp.opcode = wc->opcode;
+ tmp.vendor_err = wc->vendor_err;
+ tmp.byte_len = wc->byte_len;
+ tmp.ex.imm_data = (__u32 __force) wc->ex.imm_data;
+ tmp.qp_num = wc->qp->qp_num;
+ tmp.src_qp = wc->src_qp;
+ tmp.wc_flags = wc->wc_flags;
+ tmp.pkey_index = wc->pkey_index;
+ tmp.slid = wc->slid;
+ tmp.sl = wc->sl;
+ tmp.dlid_path_bits = wc->dlid_path_bits;
+ tmp.port_num = wc->port_num;
+ tmp.reserved = 0;
+
+ if (copy_to_user(dest, &tmp, sizeof tmp))
+ return -EFAULT;
+
+ return 0;
+}
+
ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_poll_cq cmd;
- struct ib_uverbs_poll_cq_resp *resp;
+ struct ib_uverbs_poll_cq_resp resp;
+ u8 __user *header_ptr;
+ u8 __user *data_ptr;
struct ib_cq *cq;
- struct ib_wc *wc;
- int ret = 0;
- int i;
- int rsize;
+ struct ib_wc wc;
+ int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
- wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL);
- if (!wc)
- return -ENOMEM;
-
- rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc);
- resp = kmalloc(rsize, GFP_KERNEL);
- if (!resp) {
- ret = -ENOMEM;
- goto out_wc;
- }
-
cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
- if (!cq) {
- ret = -EINVAL;
- goto out;
- }
+ if (!cq)
+ return -EINVAL;
- resp->count = ib_poll_cq(cq, cmd.ne, wc);
+ /* we copy a struct ib_uverbs_poll_cq_resp to user space */
+ header_ptr = (void __user *)(unsigned long) cmd.response;
+ data_ptr = header_ptr + sizeof resp;
- put_cq_read(cq);
+ memset(&resp, 0, sizeof resp);
+ while (resp.count < cmd.ne) {
+ ret = ib_poll_cq(cq, 1, &wc);
+ if (ret < 0)
+ goto out_put;
+ if (!ret)
+ break;
+
+ ret = copy_wc_to_user(data_ptr, &wc);
+ if (ret)
+ goto out_put;
- for (i = 0; i < resp->count; i++) {
- resp->wc[i].wr_id = wc[i].wr_id;
- resp->wc[i].status = wc[i].status;
- resp->wc[i].opcode = wc[i].opcode;
- resp->wc[i].vendor_err = wc[i].vendor_err;
- resp->wc[i].byte_len = wc[i].byte_len;
- resp->wc[i].ex.imm_data = (__u32 __force) wc[i].ex.imm_data;
- resp->wc[i].qp_num = wc[i].qp->qp_num;
- resp->wc[i].src_qp = wc[i].src_qp;
- resp->wc[i].wc_flags = wc[i].wc_flags;
- resp->wc[i].pkey_index = wc[i].pkey_index;
- resp->wc[i].slid = wc[i].slid;
- resp->wc[i].sl = wc[i].sl;
- resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits;
- resp->wc[i].port_num = wc[i].port_num;
+ data_ptr += sizeof(struct ib_uverbs_wc);
+ ++resp.count;
}
- if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize))
+ if (copy_to_user(header_ptr, &resp, sizeof resp)) {
ret = -EFAULT;
+ goto out_put;
+ }
-out:
- kfree(resp);
+ ret = in_len;
-out_wc:
- kfree(wc);
- return ret ? ret : in_len;
+out_put:
+ put_cq_read(cq);
+ return ret;
}
ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file,
dst->grh.sgid_index = src->grh.sgid_index;
dst->grh.hop_limit = src->grh.hop_limit;
dst->grh.traffic_class = src->grh.traffic_class;
+ memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
dst->dlid = src->dlid;
dst->sl = src->sl;
dst->src_path_bits = src->src_path_bits;
dst->static_rate = src->static_rate;
dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0;
dst->port_num = src->port_num;
+ dst->reserved = 0;
}
EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src)
{
+ dst->qp_state = src->qp_state;
dst->cur_qp_state = src->cur_qp_state;
dst->path_mtu = src->path_mtu;
dst->path_mig_state = src->path_mig_state;
dst->rnr_retry = src->rnr_retry;
dst->alt_port_num = src->alt_port_num;
dst->alt_timeout = src->alt_timeout;
+ memset(dst->reserved, 0, sizeof(dst->reserved));
}
EXPORT_SYMBOL(ib_copy_qp_attr_to_user);
#include <linux/highmem.h>
#include <linux/io.h>
#include <linux/jiffies.h>
-#include <linux/smp_lock.h>
#include <asm/pgtable.h>
#include "ipath_kernel.h"
struct net_device *ndev;
enum ib_mtu tmp;
- props->active_width = IB_WIDTH_4X;
+ props->active_width = IB_WIDTH_1X;
props->active_speed = 4;
props->port_cap_flags = IB_PORT_CM_SUP;
props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port];
tmp = iboe_get_mtu(ndev->mtu);
props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
- props->state = netif_running(ndev) && netif_oper_up(ndev) ?
+ props->state = (netif_running(ndev) && netif_carrier_ok(ndev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
props->phys_state = state_to_phys_state(props->state);
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
+ if (be16_to_cpu(vlan) < 0x1000) {
+ ctrl->ins_vlan = 1 << 6;
+ ctrl->vlan_tag = vlan;
+ }
+
/*
* Make sure descriptor is fully written before
* setting ownership bit (because HW can start
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
- if (be16_to_cpu(vlan) < 0x1000) {
- ctrl->ins_vlan = 1 << 6;
- ctrl->vlan_tag = vlan;
- }
-
stamp = ind + qp->sq_spare_wqes;
ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
}
}
-static int srp_queuecommand(struct scsi_cmnd *scmnd,
+static int srp_queuecommand_lck(struct scsi_cmnd *scmnd,
void (*done)(struct scsi_cmnd *))
{
struct srp_target_port *target = host_to_target(scmnd->device->host);
return SCSI_MLQUEUE_HOST_BUSY;
}
+static DEF_SCSI_QCMD(srp_queuecommand)
+
static int srp_alloc_iu_bufs(struct srp_target_port *target)
{
int i;
}
#undef OLD_KEY_MAX
-static int evdev_handle_get_keycode(struct input_dev *dev,
- void __user *p, size_t size)
+static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
{
- struct input_keymap_entry ke;
+ struct input_keymap_entry ke = {
+ .len = sizeof(unsigned int),
+ .flags = 0,
+ };
+ int __user *ip = (int __user *)p;
int error;
- memset(&ke, 0, sizeof(ke));
-
- if (size == sizeof(unsigned int[2])) {
- /* legacy case */
- int __user *ip = (int __user *)p;
+ /* legacy case */
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
- if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
- return -EFAULT;
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
- ke.len = sizeof(unsigned int);
- ke.flags = 0;
+ if (put_user(ke.keycode, ip + 1))
+ return -EFAULT;
- error = input_get_keycode(dev, &ke);
- if (error)
- return error;
+ return 0;
+}
- if (put_user(ke.keycode, ip + 1))
- return -EFAULT;
+static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p)
+{
+ struct input_keymap_entry ke;
+ int error;
- } else {
- size = min(size, sizeof(ke));
+ if (copy_from_user(&ke, p, sizeof(ke)))
+ return -EFAULT;
- if (copy_from_user(&ke, p, size))
- return -EFAULT;
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
- error = input_get_keycode(dev, &ke);
- if (error)
- return error;
+ if (copy_to_user(p, &ke, sizeof(ke)))
+ return -EFAULT;
- if (copy_to_user(p, &ke, size))
- return -EFAULT;
- }
return 0;
}
-static int evdev_handle_set_keycode(struct input_dev *dev,
- void __user *p, size_t size)
+static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p)
{
- struct input_keymap_entry ke;
-
- memset(&ke, 0, sizeof(ke));
+ struct input_keymap_entry ke = {
+ .len = sizeof(unsigned int),
+ .flags = 0,
+ };
+ int __user *ip = (int __user *)p;
- if (size == sizeof(unsigned int[2])) {
- /* legacy case */
- int __user *ip = (int __user *)p;
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
- if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
- return -EFAULT;
+ if (get_user(ke.keycode, ip + 1))
+ return -EFAULT;
- if (get_user(ke.keycode, ip + 1))
- return -EFAULT;
+ return input_set_keycode(dev, &ke);
+}
- ke.len = sizeof(unsigned int);
- ke.flags = 0;
+static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
+{
+ struct input_keymap_entry ke;
- } else {
- size = min(size, sizeof(ke));
+ if (copy_from_user(&ke, p, sizeof(ke)))
+ return -EFAULT;
- if (copy_from_user(&ke, p, size))
- return -EFAULT;
-
- if (ke.len > sizeof(ke.scancode))
- return -EINVAL;
- }
+ if (ke.len > sizeof(ke.scancode))
+ return -EINVAL;
return input_set_keycode(dev, &ke);
}
return evdev_grab(evdev, client);
else
return evdev_ungrab(evdev, client);
+
+ case EVIOCGKEYCODE:
+ return evdev_handle_get_keycode(dev, p);
+
+ case EVIOCSKEYCODE:
+ return evdev_handle_set_keycode(dev, p);
+
+ case EVIOCGKEYCODE_V2:
+ return evdev_handle_get_keycode_v2(dev, p);
+
+ case EVIOCSKEYCODE_V2:
+ return evdev_handle_set_keycode_v2(dev, p);
}
size = _IOC_SIZE(cmd);
return -EFAULT;
return error;
-
- case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
- return evdev_handle_get_keycode(dev, p, size);
-
- case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
- return evdev_handle_set_keycode(dev, p, size);
}
/* Multi-number variable-length handlers */
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/rcupdate.h>
-#include <linux/smp_lock.h>
#include "input-compat.h"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
if (index >= dev->keycodemax)
return -EINVAL;
- if (dev->keycodesize < sizeof(dev->keycode) &&
+ if (dev->keycodesize < sizeof(ke->keycode) &&
(ke->keycode >> (dev->keycodesize * 8)))
return -EINVAL;
goto err_free_tgfx;
}
+ parport_put_port(pp);
return tgfx;
err_free_dev:
To compile this driver as a module, choose M here: the
module will be called gpio_keys.
+config KEYBOARD_GPIO_POLLED
+ tristate "Polled GPIO buttons"
+ depends on GENERIC_GPIO
+ select INPUT_POLLDEV
+ help
+ This driver implements support for buttons connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_keys_polled.
+
config KEYBOARD_TCA6416
tristate "TCA6416 Keypad Support"
depends on I2C
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
--- /dev/null
+/*
+ * Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ * This file was based on: /drivers/input/misc/cobalt_btns.c
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * also was based on: /drivers/input/keyboard/gpio_keys.c
+ * Copyright 2005 Phil Blundell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME "gpio-keys-polled"
+
+struct gpio_keys_button_data {
+ int last_state;
+ int count;
+ int threshold;
+ int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+ struct input_polled_dev *poll_dev;
+ struct device *dev;
+ struct gpio_keys_platform_data *pdata;
+ struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+ struct gpio_keys_button *button,
+ struct gpio_keys_button_data *bdata)
+{
+ int state;
+
+ if (bdata->can_sleep)
+ state = !!gpio_get_value_cansleep(button->gpio);
+ else
+ state = !!gpio_get_value(button->gpio);
+
+ if (state != bdata->last_state) {
+ unsigned int type = button->type ?: EV_KEY;
+
+ input_event(input, type, button->code,
+ !!(state ^ button->active_low));
+ input_sync(input);
+ bdata->count = 0;
+ bdata->last_state = state;
+ }
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ struct input_dev *input = dev->input;
+ int i;
+
+ for (i = 0; i < bdev->pdata->nbuttons; i++) {
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+ if (bdata->count < bdata->threshold)
+ bdata->count++;
+ else
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ bdata);
+ }
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->enable)
+ pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->disable)
+ pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+ struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct gpio_keys_polled_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error;
+ int i;
+
+ if (!pdata || !pdata->poll_interval)
+ return -EINVAL;
+
+ bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+ pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+ GFP_KERNEL);
+ if (!bdev) {
+ dev_err(dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ dev_err(dev, "no memory for polled device\n");
+ error = -ENOMEM;
+ goto err_free_bdev;
+ }
+
+ poll_dev->private = bdev;
+ poll_dev->poll = gpio_keys_polled_poll;
+ poll_dev->poll_interval = pdata->poll_interval;
+ poll_dev->open = gpio_keys_polled_open;
+ poll_dev->close = gpio_keys_polled_close;
+
+ input = poll_dev->input;
+
+ input->evbit[0] = BIT(EV_KEY);
+ input->name = pdev->name;
+ input->phys = DRV_NAME"/input0";
+ input->dev.parent = &pdev->dev;
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ struct gpio_keys_button *button = &pdata->buttons[i];
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+ unsigned int gpio = button->gpio;
+ unsigned int type = button->type ?: EV_KEY;
+
+ if (button->wakeup) {
+ dev_err(dev, DRV_NAME " does not support wakeup\n");
+ error = -EINVAL;
+ goto err_free_gpio;
+ }
+
+ error = gpio_request(gpio,
+ button->desc ? button->desc : DRV_NAME);
+ if (error) {
+ dev_err(dev, "unable to claim gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ error = gpio_direction_input(gpio);
+ if (error) {
+ dev_err(dev,
+ "unable to set direction on gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ bdata->can_sleep = gpio_cansleep(gpio);
+ bdata->last_state = -1;
+ bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+ pdata->poll_interval);
+
+ input_set_capability(input, type, button->code);
+ }
+
+ bdev->poll_dev = poll_dev;
+ bdev->dev = dev;
+ bdev->pdata = pdata;
+ platform_set_drvdata(pdev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(dev, "unable to register polled device, err=%d\n",
+ error);
+ goto err_free_gpio;
+ }
+
+ /* report initial state of the buttons */
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ &bdev->data[i]);
+
+ return 0;
+
+err_free_gpio:
+ while (--i >= 0)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(poll_dev);
+
+err_free_bdev:
+ kfree(bdev);
+
+ platform_set_drvdata(pdev, NULL);
+ return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+ struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ int i;
+
+ input_unregister_polled_device(bdev->poll_dev);
+
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(bdev->poll_dev);
+
+ kfree(bdev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+ .probe = gpio_keys_polled_probe,
+ .remove = __devexit_p(gpio_keys_polled_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+ return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+ platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
/* synaptics modes query bits */
gscps2_reset(ps2port);
ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
- snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+ snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <linux/module.h>
#include <linux/serio.h>
}
static DEVICE_ATTR(pointer_mode,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletPointerMode, store_tabletPointerMode);
/***********************************************************************
}
static DEVICE_ATTR(coordinate_mode,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletCoordinateMode, store_tabletCoordinateMode);
/***********************************************************************
}
static DEVICE_ATTR(tool_mode,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletToolMode, store_tabletToolMode);
/***********************************************************************
}
static DEVICE_ATTR(xtilt,
- S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt);
+ S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
/***********************************************************************
* support routines for the 'ytilt' file. Note that this file
}
static DEVICE_ATTR(ytilt,
- S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt);
+ S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
/***********************************************************************
* support routines for the 'jitter' file. Note that this file
}
static DEVICE_ATTR(jitter,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletJitterDelay, store_tabletJitterDelay);
/***********************************************************************
}
static DEVICE_ATTR(delay,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletProgrammableDelay, store_tabletProgrammableDelay);
/***********************************************************************
}
static DEVICE_ATTR(stylus_upper,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletStylusUpper, store_tabletStylusUpper);
/***********************************************************************
}
static DEVICE_ATTR(stylus_lower,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletStylusLower, store_tabletStylusLower);
/***********************************************************************
}
static DEVICE_ATTR(mouse_left,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletMouseLeft, store_tabletMouseLeft);
/***********************************************************************
}
static DEVICE_ATTR(mouse_middle,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletMouseMiddle, store_tabletMouseMiddle);
/***********************************************************************
}
static DEVICE_ATTR(mouse_right,
- S_IRUGO | S_IWUGO,
+ S_IRUGO | S_IWUSR,
show_tabletMouseRight, store_tabletMouseRight);
/***********************************************************************
}
static DEVICE_ATTR(wheel,
- S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel);
+ S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
/***********************************************************************
* support routines for the 'execute' file. Note that this file
}
static DEVICE_ATTR(execute,
- S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute);
+ S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
/***********************************************************************
* support routines for the 'odm_code' file. Note that this file
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static const struct wacom_features wacom_features_0xD4 =
+ { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+ { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+ { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+ { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
+ { USB_DEVICE_WACOM(0xD4) },
+ { USB_DEVICE_WACOM(0xD8) },
+ { USB_DEVICE_WACOM(0xDA) },
+ { USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+ {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
if (b3skb == NULL) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+ kfree(b3cmsg);
return;
}
capi_cmsg2message(b3cmsg,
static int __init icn_init(void)
{
char *p;
- char rev[10];
+ char rev[20];
memset(&dev, 0, sizeof(icn_dev));
dev.memaddr = (membase & 0x0ffc000);
spin_lock_init(&dev.devlock);
if ((p = strchr(revision, ':'))) {
- strcpy(rev, p + 1);
+ strncpy(rev, p + 1, 20);
p = strchr(rev, '$');
- *p = 0;
+ if (p)
+ *p = 0;
} else
strcpy(rev, " ??? ");
printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,
This is not related to standard keyboard LEDs which are controlled
via the input system.
-if NEW_LEDS
-
config LEDS_CLASS
bool "LED Class Support"
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-if LEDS_CLASS
+if NEW_LEDS
comment "LED drivers"
config LEDS_88PM860X
tristate "LED Support for Marvell 88PM860x PMIC"
+ depends on LEDS_CLASS
depends on MFD_88PM860X
help
This option enables support for on-chip LED drivers found on Marvell
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
+ depends on LEDS_CLASS
depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
+ depends on LEDS_CLASS
depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS
depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+ depends on LEDS_CLASS
depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
+ depends on LEDS_CLASS
depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
+ depends on LEDS_CLASS
depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
+ depends on LEDS_CLASS
depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
+ depends on LEDS_CLASS
depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
+ depends on LEDS_CLASS
depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
+ depends on LEDS_CLASS
depends on SPARC64
select LEDS_TRIGGERS
help
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
+ depends on LEDS_CLASS
depends on SH_HP6XX
help
This option enables LED support for the handheld
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
+ depends on LEDS_CLASS
depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to the National
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS
depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to PCA955x
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS
depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
+ depends on LEDS_CLASS
depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS
depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
config LEDS_PWM
tristate "PWM driven LED Support"
+ depends on LEDS_CLASS
depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
config LEDS_REGULATOR
tristate "REGULATOR driven LED support"
+ depends on LEDS_CLASS
depends on REGULATOR
help
This option enables support for regulator driven LEDs.
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS
depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for LEDs driven by a Linear Technology
config LEDS_ADP5520
tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_ADP5520
help
This option enables support for on-chip LED drivers found
config LEDS_DELL_NETBOOKS
tristate "External LED on Dell Business Netbooks"
+ depends on LEDS_CLASS
depends on X86 && ACPI_WMI
help
This adds support for the Latitude 2100 and similar
config LEDS_MC13783
tristate "LED Support for MC13783 PMIC"
+ depends on LEDS_CLASS
depends on MFD_MC13783
help
This option enable support for on-chip LED drivers found
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
+ depends on LEDS_CLASS
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
default y
help
config LEDS_TRIGGERS
bool "LED Trigger support"
+ depends on LEDS_CLASS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
-if LEDS_TRIGGERS
-
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on IDE_GD_ATA
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
-endif # LEDS_TRIGGERS
-
-endif # LEDS_CLASS
-
endif # NEW_LEDS
unsigned long *delay_off)
{
if (led_cdev->blink_set &&
- led_cdev->blink_set(led_cdev, delay_on, delay_off))
+ !led_cdev->blink_set(led_cdev, delay_on, delay_off))
return;
/* blink with 1 Hz as default if nothing specified */
u8 num_leds;
};
-#define cdev_to_led(c) container_of(c, struct lp5521_led, cdev)
-#define engine_to_lp5521(eng) container_of((eng), struct lp5521_chip, \
- engines[(eng)->id - 1])
-#define led_to_lp5521(led) container_of((led), struct lp5521_chip, \
- leds[(led)->id])
+static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct lp5521_led, cdev);
+}
+
+static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine)
+{
+ return container_of(engine, struct lp5521_chip,
+ engines[engine->id - 1]);
+}
+
+static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led)
+{
+ return container_of(led, struct lp5521_chip,
+ leds[led->id]);
+}
static void lp5521_led_brightness_work(struct work_struct *work);
/* move current engine to direct mode and remember the state */
ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
- usleep_range(1000, 10000);
+ /* Mode change requires min 500 us delay. 1 - 2 ms with margin */
+ usleep_range(1000, 2000);
ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
/* For loading, all the engines to load mode */
lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
- usleep_range(1000, 10000);
+ /* Mode change requires min 500 us delay. 1 - 2 ms with margin */
+ usleep_range(1000, 2000);
lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
- usleep_range(1000, 10000);
+ /* Mode change requires min 500 us delay. 1 - 2 ms with margin */
+ usleep_range(1000, 2000);
addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
i2c_smbus_write_i2c_block_data(client,
lp5521_init_engine(chip, attr_group);
- lp5521_write(client, LP5521_REG_RESET, 0xff);
-
- usleep_range(10000, 20000);
-
/* Set all PWMs to direct control mode */
ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
ret |= lp5521_write(client, LP5521_REG_ENABLE,
LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
LP5521_EXEC_RUN);
- /* enable takes 500us */
- usleep_range(500, 20000);
+ /* enable takes 500us. 1 - 2 ms leaves some margin */
+ usleep_range(1000, 2000);
return ret;
}
LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
if (ret)
return ret;
- usleep_range(1000, 10000);
+ /* enable takes 500us. 1 - 2 ms leaves some margin */
+ usleep_range(1000, 2000);
ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
if (ret)
return ret;
if (pdata->enable) {
pdata->enable(0);
- usleep_range(1000, 10000);
+ usleep_range(1000, 2000); /* Keep enable down at least 1ms */
pdata->enable(1);
- usleep_range(1000, 10000); /* Spec says min 500us */
+ usleep_range(1000, 2000); /* 500us abs min. */
}
+ lp5521_write(client, LP5521_REG_RESET, 0xff);
+ usleep_range(10000, 20000); /*
+ * Exact value is not available. 10 - 20ms
+ * appears to be enough for reset.
+ */
ret = lp5521_detect(client);
if (ret) {
u8 num_leds;
};
-#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev)
+static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct lp5523_led, cdev);
+}
-static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
{
return container_of(engine, struct lp5523_chip,
engines[engine->id - 1]);
}
-static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
{
return container_of(led, struct lp5523_chip,
leds[led->id]);
{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
};
- lp5523_write(client, LP5523_REG_RESET, 0xff);
-
- usleep_range(10000, 100000);
-
ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
- /* Chip startup time after reset is 500 us */
- usleep_range(1000, 10000);
+ /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+ usleep_range(1000, 2000);
ret |= lp5523_write(client, LP5523_REG_CONFIG,
LP5523_AUTO_INC | LP5523_PWR_SAVE |
return -1;
}
- /* Wait 3ms and check the engine status */
- usleep_range(3000, 20000);
+ /* Let the programs run for couple of ms and check the engine status */
+ usleep_range(3000, 6000);
lp5523_read(client, LP5523_REG_STATUS, &status);
status &= LP5523_ENG_STATUS_MASK;
/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
LP5523_EN_LEDTEST | 16);
- usleep_range(3000, 10000);
+ usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
if (!(status & LP5523_LEDTEST_DONE))
- usleep_range(3000, 10000);
+ usleep_range(3000, 6000); /* Was not ready. Wait little bit */
ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
vdd--; /* There may be some fluctuation in measurement */
chip->pdata->led_config[i].led_current);
lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
- /* let current stabilize 2ms before measurements start */
- usleep_range(2000, 10000);
+ /* let current stabilize 2 - 4ms before measurements start */
+ usleep_range(2000, 4000);
lp5523_write(chip->client,
LP5523_REG_LED_TEST_CTRL,
LP5523_EN_LEDTEST | i);
- /* ledtest takes 2.7ms */
- usleep_range(3000, 10000);
+ /* ADC conversion time is 2.7 ms typically */
+ usleep_range(3000, 6000);
ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
if (!(status & LP5523_LEDTEST_DONE))
- usleep_range(3000, 10000);
+ usleep_range(3000, 6000);/* Was not ready. Wait. */
ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
if (pdata->enable) {
pdata->enable(0);
- usleep_range(1000, 10000);
+ usleep_range(1000, 2000); /* Keep enable down at least 1ms */
pdata->enable(1);
- usleep_range(1000, 10000); /* Spec says min 500us */
+ usleep_range(1000, 2000); /* 500us abs min. */
}
+ lp5523_write(client, LP5523_REG_RESET, 0xff);
+ usleep_range(10000, 20000); /*
+ * Exact value is not available. 10 - 20ms
+ * appears to be enough for reset.
+ */
ret = lp5523_detect(client);
if (ret)
goto fail2;
DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
}
},
+ {}
};
/*
config ADB_PMU_LED_IDE
bool "Use front LED as IDE LED by default"
depends on ADB_PMU_LED
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_IDE_DISK
help
*/
if (q->merge_bvec_fn && !ti->type->merge)
- limits->max_sectors =
- min_not_zero(limits->max_sectors,
- (unsigned int) (PAGE_SIZE >> 9));
+ blk_limits_max_hw_sectors(limits,
+ (unsigned int) (PAGE_SIZE >> 9));
return 0;
}
EXPORT_SYMBOL_GPL(dm_set_device_limits);
*/
q->limits = *limits;
- if (limits->no_cluster)
- queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
- else
- queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
-
if (!dm_table_supports_discards(t))
queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
else
bio_put(bio);
}
-static void submit_flushes(mddev_t *mddev)
+static void md_submit_flush_data(struct work_struct *ws);
+
+static void submit_flushes(struct work_struct *ws)
{
+ mddev_t *mddev = container_of(ws, mddev_t, flush_work);
mdk_rdev_t *rdev;
+ INIT_WORK(&mddev->flush_work, md_submit_flush_data);
+ atomic_set(&mddev->flush_pending, 1);
rcu_read_lock();
list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
rdev_dec_pending(rdev, mddev);
}
rcu_read_unlock();
+ if (atomic_dec_and_test(&mddev->flush_pending))
+ queue_work(md_wq, &mddev->flush_work);
}
static void md_submit_flush_data(struct work_struct *ws)
mddev_t *mddev = container_of(ws, mddev_t, flush_work);
struct bio *bio = mddev->flush_bio;
- atomic_set(&mddev->flush_pending, 1);
-
if (bio->bi_size == 0)
/* an empty barrier - all done */
bio_endio(bio, 0);
if (mddev->pers->make_request(mddev, bio))
generic_make_request(bio);
}
- if (atomic_dec_and_test(&mddev->flush_pending)) {
- mddev->flush_bio = NULL;
- wake_up(&mddev->sb_wait);
- }
+
+ mddev->flush_bio = NULL;
+ wake_up(&mddev->sb_wait);
}
void md_flush_request(mddev_t *mddev, struct bio *bio)
mddev->flush_bio = bio;
spin_unlock_irq(&mddev->write_lock);
- atomic_set(&mddev->flush_pending, 1);
- INIT_WORK(&mddev->flush_work, md_submit_flush_data);
-
- submit_flushes(mddev);
-
- if (atomic_dec_and_test(&mddev->flush_pending))
- queue_work(md_wq, &mddev->flush_work);
+ INIT_WORK(&mddev->flush_work, submit_flushes);
+ queue_work(md_wq, &mddev->flush_work);
}
EXPORT_SYMBOL(md_flush_request);
md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
rdev->sb_page);
md_super_wait(rdev->mddev);
- return num_sectors / 2; /* kB for sysfs */
+ return num_sectors;
}
md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
rdev->sb_page);
md_super_wait(rdev->mddev);
- return num_sectors / 2; /* kB for sysfs */
+ return num_sectors;
}
static struct super_type super_types[] = {
goto abort;
mddev->queue->queuedata = mddev;
- /* Can be unlocked because the queue is new: no concurrency */
- queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue);
-
blk_queue_make_request(mddev->queue, md_make_request);
disk = alloc_disk(1 << shift);
if (mddev->kobj.sd &&
sysfs_create_group(&mddev->kobj, &md_bitmap_group))
printk(KERN_DEBUG "pointless warning\n");
+
+ blk_queue_flush(mddev->queue, REQ_FLUSH | REQ_FUA);
abort:
mutex_unlock(&disks_mutex);
if (!error && mddev->kobj.sd) {
PTR_ERR(rdev));
return PTR_ERR(rdev);
}
- /* set save_raid_disk if appropriate */
+ /* set saved_raid_disk if appropriate */
if (!mddev->persistent) {
if (info->state & (1<<MD_DISK_SYNC) &&
info->raid_disk < mddev->raid_disks)
} else
super_types[mddev->major_version].
validate_super(mddev, rdev);
- rdev->saved_raid_disk = rdev->raid_disk;
+ if (test_bit(In_sync, &rdev->flags))
+ rdev->saved_raid_disk = rdev->raid_disk;
+ else
+ rdev->saved_raid_disk = -1;
clear_bit(In_sync, &rdev->flags); /* just to be sure */
if (info->state & (1<<MD_DISK_WRITEMOSTLY))
|| kthread_should_stop(),
thread->timeout);
- clear_bit(THREAD_WAKEUP, &thread->flags);
-
- thread->run(thread->mddev);
+ if (test_and_clear_bit(THREAD_WAKEUP, &thread->flags))
+ thread->run(thread->mddev);
}
return 0;
* is not possible.
*/
if (!test_bit(Faulty, &rdev->flags) &&
+ !mddev->recovery_disabled &&
mddev->degraded < conf->raid_disks) {
err = -EBUSY;
goto abort;
return 0;
out_free_conf:
+ md_unregister_thread(mddev->thread);
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
safe_put_page(conf->tmppage);
kfree(conf->mirrors);
kfree(conf);
mddev->private = NULL;
- md_unregister_thread(mddev->thread);
out:
return -EIO;
}
{ 0x800f040a, KEY_DELETE },
{ 0x800f040b, KEY_ENTER },
- { 0x800f040c, KEY_POWER },
- { 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
+ { 0x800f040c, KEY_POWER }, /* PC Power */
+ { 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
{ 0x800f040e, KEY_MUTE },
{ 0x800f040f, KEY_INFO },
{ 0x800f0422, KEY_OK },
{ 0x800f0423, KEY_EXIT },
{ 0x800f0424, KEY_DVD },
- { 0x800f0425, KEY_TUNER }, /* LiveTV */
- { 0x800f0426, KEY_EPG }, /* Guide */
- { 0x800f0427, KEY_ZOOM }, /* Aspect */
+ { 0x800f0425, KEY_TUNER }, /* LiveTV */
+ { 0x800f0426, KEY_EPG }, /* Guide */
+ { 0x800f0427, KEY_ZOOM }, /* Aspect */
{ 0x800f043a, KEY_BRIGHTNESSUP },
{ 0x800f0446, KEY_TV },
- { 0x800f0447, KEY_AUDIO }, /* My Music */
- { 0x800f0448, KEY_PVR }, /* RecordedTV */
+ { 0x800f0447, KEY_AUDIO }, /* My Music */
+ { 0x800f0448, KEY_PVR }, /* RecordedTV */
{ 0x800f0449, KEY_CAMERA },
{ 0x800f044a, KEY_VIDEO },
{ 0x800f044c, KEY_LANGUAGE },
{ 0x800f044d, KEY_TITLE },
- { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
+ { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
{ 0x800f0450, KEY_RADIO },
- { 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
+ { 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
{ 0x800f045b, KEY_RED },
{ 0x800f045c, KEY_GREEN },
{ 0x800f045d, KEY_YELLOW },
{ 0x800f045e, KEY_BLUE },
+ { 0x800f0465, KEY_POWER2 }, /* TV Power */
{ 0x800f046e, KEY_PLAYPAUSE },
- { 0x800f046f, KEY_MEDIA }, /* Start media application (NEW) */
+ { 0x800f046f, KEY_MEDIA }, /* Start media application (NEW) */
{ 0x800f0480, KEY_BRIGHTNESSDOWN },
{ 0x800f0481, KEY_PLAYPAUSE },
dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
- if (!ir->attached) {
- mutex_unlock(&ir->irctl_lock);
+ if (!ir->attached)
return POLLERR;
- }
poll_wait(file, &ir->buf->wait_poll, wait);
if (!buf)
return -ENOMEM;
- if (mutex_lock_interruptible(&ir->irctl_lock))
- return -ERESTARTSYS;
+ if (mutex_lock_interruptible(&ir->irctl_lock)) {
+ ret = -ERESTARTSYS;
+ goto out_unlocked;
+ }
if (!ir->attached) {
- mutex_unlock(&ir->irctl_lock);
- return -ENODEV;
+ ret = -ENODEV;
+ goto out_locked;
}
if (length % ir->chunk_size) {
- dev_dbg(ir->d.dev, LOGHEAD "read result = -EINVAL\n",
- ir->d.name, ir->d.minor);
- mutex_unlock(&ir->irctl_lock);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_locked;
}
/*
lirc_buffer_read(ir->buf, buf);
ret = copy_to_user((void *)buffer+written, buf,
ir->buf->chunk_size);
- written += ir->buf->chunk_size;
+ if (!ret)
+ written += ir->buf->chunk_size;
+ else
+ ret = -EFAULT;
}
}
remove_wait_queue(&ir->buf->wait_poll, &wait);
set_current_state(TASK_RUNNING);
+
+out_locked:
mutex_unlock(&ir->irctl_lock);
out_unlocked:
kfree(buf);
dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
- ir->d.name, ir->d.minor, ret ? "-EFAULT" : "OK", ret);
+ ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret);
return ret ? ret : written;
}
#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
#include <media/ir-core.h>
-#include <media/ir-common.h>
#define DRIVER_VERSION "1.91"
#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
#define USB_BUFLEN 32 /* USB reception buffer length */
#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
+#define MS_TO_NS(msec) ((msec) * 1000)
/* MCE constants */
#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
+#define MCE_CMD_SIG_END 0x01 /* End of signal */
#define MCE_CMD_PING 0x03 /* Ping device */
#define MCE_CMD_UNKNOWN 0x04 /* Unknown */
#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */
#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */
#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */
#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */
+#define MCE_RSP_PULSE_COUNT 0x15 /* RX pulse count (only if learning) */
#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */
#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */
#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */
MCE_GEN3,
MCE_GEN2_TX_INV,
POLARIS_EVK,
+ CX_HYBRID_TV,
};
struct mceusb_model {
u32 mce_gen1:1;
u32 mce_gen2:1;
u32 mce_gen3:1;
- u32 tx_mask_inverted:1;
+ u32 tx_mask_normal:1;
u32 is_polaris:1;
+ u32 no_tx:1;
const char *rc_map; /* Allow specify a per-board map */
const char *name; /* per-board name */
static const struct mceusb_model mceusb_model[] = {
[MCE_GEN1] = {
.mce_gen1 = 1,
- .tx_mask_inverted = 1,
+ .tx_mask_normal = 1,
},
[MCE_GEN2] = {
.mce_gen2 = 1,
},
[MCE_GEN2_TX_INV] = {
.mce_gen2 = 1,
- .tx_mask_inverted = 1,
+ .tx_mask_normal = 1,
},
[MCE_GEN3] = {
.mce_gen3 = 1,
- .tx_mask_inverted = 1,
+ .tx_mask_normal = 1,
},
[POLARIS_EVK] = {
.is_polaris = 1,
* to allow testing it
*/
.rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
- .name = "cx231xx MCE IR",
+ .name = "Conexant Hybrid TV (cx231xx) MCE IR",
+ },
+ [CX_HYBRID_TV] = {
+ .is_polaris = 1,
+ .no_tx = 1, /* tx isn't wired up at all */
+ .name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
};
{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
/* Formosa Industrial Computing */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
+ /* Fintek eHome Infrared Transceiver (HP branded) */
+ { USB_DEVICE(VENDOR_FINTEK, 0x5168) },
/* Fintek eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
/* TiVo PC IR Receiver */
{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
- /* Conexant SDK */
+ /* Conexant Hybrid TV "Shelby" Polaris SDK */
{ USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
.driver_info = POLARIS_EVK },
+ /* Conexant Hybrid TV RDU253S Polaris */
+ { USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
+ .driver_info = CX_HYBRID_TV },
/* Terminating entry */
{ }
};
struct mceusb_dev {
/* ir-core bits */
struct ir_dev_props *props;
- struct ir_raw_event rawir;
+
+ /* optional features we can enable */
+ bool carrier_report_enabled;
+ bool learning_enabled;
/* core device bits */
struct device *dev;
/* buffers and dma */
unsigned char *buf_in;
unsigned int len_in;
+ dma_addr_t dma_in;
+ dma_addr_t dma_out;
enum {
CMD_HEADER = 0,
CMD_DATA,
PARSE_IRDATA,
} parser_state;
- u8 cmd, rem; /* Remaining IR data bytes in packet */
- dma_addr_t dma_in;
- dma_addr_t dma_out;
+ u8 cmd, rem; /* Remaining IR data bytes in packet */
struct {
u32 connected:1;
- u32 tx_mask_inverted:1;
+ u32 tx_mask_normal:1;
u32 microsoft_gen1:1;
+ u32 no_tx:1;
} flags;
/* transmit support */
case MCE_CMD_UNKNOWN:
case MCE_CMD_S_CARRIER:
case MCE_CMD_S_TIMEOUT:
- case MCE_CMD_G_RXSENSOR:
+ case MCE_RSP_PULSE_COUNT:
datasize = 2;
break;
+ case MCE_CMD_SIG_END:
case MCE_CMD_S_TXMASK:
case MCE_CMD_S_RXSENSOR:
datasize = 1;
return;
/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
- if (ir->flags.microsoft_gen1 && !out)
+ if (ir->flags.microsoft_gen1 && !out && !offset)
skip = 2;
if (len <= skip)
break;
case MCE_COMMAND_HEADER:
switch (subcmd) {
+ case MCE_CMD_SIG_END:
+ dev_info(dev, "End of signal\n");
+ break;
case MCE_CMD_PING:
dev_info(dev, "Ping\n");
break;
inout, data1 == 0x02 ? "short" : "long");
break;
case MCE_CMD_G_RXSENSOR:
- if (len == 2)
+ /* aka MCE_RSP_PULSE_COUNT */
+ if (out)
dev_info(dev, "Get receive sensor\n");
- else
- dev_info(dev, "Received pulse count is %d\n",
+ else if (ir->learning_enabled)
+ dev_info(dev, "RX pulse count: %d\n",
((data1 << 8) | data2));
break;
case MCE_RSP_CMD_INVALID:
return ret ? ret : n;
}
-/* Sets active IR outputs -- mce devices typically (all?) have two */
+/* Sets active IR outputs -- mce devices typically have two */
static int mceusb_set_tx_mask(void *priv, u32 mask)
{
struct mceusb_dev *ir = priv;
- if (ir->flags.tx_mask_inverted)
+ if (ir->flags.tx_mask_normal)
+ ir->tx_mask = mask;
+ else
ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
- else
- ir->tx_mask = mask;
return 0;
}
if (carrier == 0) {
ir->carrier = carrier;
- cmdbuf[2] = 0x01;
+ cmdbuf[2] = MCE_CMD_SIG_END;
cmdbuf[3] = MCE_IRDATA_TRAILER;
dev_dbg(ir->dev, "%s: disabling carrier "
"modulation\n", __func__);
return carrier;
}
+/*
+ * We don't do anything but print debug spew for many of the command bits
+ * we receive from the hardware, but some of them are useful information
+ * we want to store so that we can use them.
+ */
+static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+{
+ u8 hi = ir->buf_in[index + 1] & 0xff;
+ u8 lo = ir->buf_in[index + 2] & 0xff;
+
+ switch (ir->buf_in[index]) {
+ /* 2-byte return value commands */
+ case MCE_CMD_S_TIMEOUT:
+ ir->props->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+ break;
+
+ /* 1-byte return value commands */
+ case MCE_CMD_S_TXMASK:
+ ir->tx_mask = hi;
+ break;
+ case MCE_CMD_S_RXSENSOR:
+ ir->learning_enabled = (hi == 0x02);
+ break;
+ default:
+ break;
+ }
+}
+
static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
{
DEFINE_IR_RAW_EVENT(rawir);
if (ir->flags.microsoft_gen1)
i = 2;
+ /* if there's no data, just return now */
+ if (buf_len <= i)
+ return;
+
for (; i < buf_len; i++) {
switch (ir->parser_state) {
case SUBCMD:
ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
mceusb_dev_printdata(ir, ir->buf_in, i - 1,
ir->rem + 2, false);
+ mceusb_handle_command(ir, i);
ir->parser_state = CMD_DATA;
break;
case PARSE_IRDATA:
ir->rem--;
rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
- * MCE_TIME_UNIT * 1000;
-
- if ((ir->buf_in[i] & MCE_PULSE_MASK) == 0x7f) {
- if (ir->rawir.pulse == rawir.pulse) {
- ir->rawir.duration += rawir.duration;
- } else {
- ir->rawir.duration = rawir.duration;
- ir->rawir.pulse = rawir.pulse;
- }
- if (ir->rem)
- break;
- }
- rawir.duration += ir->rawir.duration;
- ir->rawir.duration = 0;
- ir->rawir.pulse = rawir.pulse;
+ * MS_TO_NS(MCE_TIME_UNIT);
dev_dbg(ir->dev, "Storing %s with duration %d\n",
rawir.pulse ? "pulse" : "space",
rawir.duration);
- ir_raw_event_store(ir->idev, &rawir);
+ ir_raw_event_store_with_filter(ir->idev, &rawir);
break;
case CMD_DATA:
ir->rem--;
continue;
}
ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
- mceusb_dev_printdata(ir, ir->buf_in, i, ir->rem + 1, false);
- if (ir->rem) {
+ mceusb_dev_printdata(ir, ir->buf_in,
+ i, ir->rem + 1, false);
+ if (ir->rem)
ir->parser_state = PARSE_IRDATA;
- break;
- }
- /*
- * a package with len=0 (e. g. 0x80) means end of
- * data. We could use it to do the call to
- * ir_raw_event_handle(). For now, we don't need to
- * use it.
- */
break;
}
mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
mce_sync_in(ir, NULL, maxp);
- /* get the transmitter bitmask */
- mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
- mce_sync_in(ir, NULL, maxp);
+ if (!ir->flags.no_tx) {
+ /* get the transmitter bitmask */
+ mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+ mce_sync_in(ir, NULL, maxp);
+ }
/* get receiver timeout value */
mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
props->priv = ir;
props->driver_type = RC_DRIVER_IR_RAW;
props->allowed_protos = IR_TYPE_ALL;
- props->s_tx_mask = mceusb_set_tx_mask;
- props->s_tx_carrier = mceusb_set_tx_carrier;
- props->tx_ir = mceusb_tx_ir;
+ props->timeout = MS_TO_NS(1000);
+ if (!ir->flags.no_tx) {
+ props->s_tx_mask = mceusb_set_tx_mask;
+ props->s_tx_carrier = mceusb_set_tx_carrier;
+ props->tx_ir = mceusb_tx_ir;
+ }
ir->props = props;
+ usb_to_input_id(ir->usbdev, &idev->id);
+ idev->dev.parent = ir->dev;
+
if (mceusb_model[ir->model].rc_map)
rc_map = mceusb_model[ir->model].rc_map;
enum mceusb_model_type model = id->driver_info;
bool is_gen3;
bool is_microsoft_gen1;
- bool tx_mask_inverted;
+ bool tx_mask_normal;
bool is_polaris;
- dev_dbg(&intf->dev, ": %s called\n", __func__);
+ dev_dbg(&intf->dev, "%s called\n", __func__);
idesc = intf->cur_altsetting;
is_gen3 = mceusb_model[model].mce_gen3;
is_microsoft_gen1 = mceusb_model[model].mce_gen1;
- tx_mask_inverted = mceusb_model[model].tx_mask_inverted;
+ tx_mask_normal = mceusb_model[model].tx_mask_normal;
is_polaris = mceusb_model[model].is_polaris;
if (is_polaris) {
ep_in = ep;
ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
ep_in->bInterval = 1;
- dev_dbg(&intf->dev, ": acceptable inbound endpoint "
+ dev_dbg(&intf->dev, "acceptable inbound endpoint "
"found\n");
}
ep_out = ep;
ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
ep_out->bInterval = 1;
- dev_dbg(&intf->dev, ": acceptable outbound endpoint "
+ dev_dbg(&intf->dev, "acceptable outbound endpoint "
"found\n");
}
}
if (ep_in == NULL) {
- dev_dbg(&intf->dev, ": inbound and/or endpoint not found\n");
+ dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
return -ENODEV;
}
ir->dev = &intf->dev;
ir->len_in = maxp;
ir->flags.microsoft_gen1 = is_microsoft_gen1;
- ir->flags.tx_mask_inverted = tx_mask_inverted;
+ ir->flags.tx_mask_normal = tx_mask_normal;
+ ir->flags.no_tx = mceusb_model[model].no_tx;
ir->model = model;
- init_ir_raw_event(&ir->rawir);
-
/* Saving usb interface data for use by the transmitter routine */
ir->usb_ep_in = ep_in;
ir->usb_ep_out = ep_out;
mceusb_get_parameters(ir);
- mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+ if (!ir->flags.no_tx)
+ mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
usb_set_intfdata(intf, ir);
count = nvt->pkts;
nvt_dbg_verbose("Processing buffer of len %d", count);
+ init_ir_raw_event(&rawir);
+
for (i = 0; i < count; i++) {
nvt->pkts--;
sample = nvt->buf[i];
* indicates end of IR signal, but new data incoming. In both
* cases, it means we're ready to call ir_raw_event_handle
*/
- if (sample == BUF_PULSE_BIT || ((sample != BUF_LEN_MASK) &&
- (sample & BUF_REPEAT_MASK) == BUF_REPEAT_BYTE))
+ if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
+ nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
ir_raw_event_handle(nvt->rdev);
+ }
}
+ nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
+ ir_raw_event_handle(nvt->rdev);
+
if (nvt->pkts) {
nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
nvt->pkts = 0;
#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
#include <media/ir-core.h>
#define DRIVER_VERSION "1.61"
static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
{
- ir_raw_event_store(sz->idev, &rawir);
+ dev_dbg(sz->dev, "Storing %s with duration %u us\n",
+ (rawir.pulse ? "pulse" : "space"), rawir.duration);
+ ir_raw_event_store_with_filter(sz->idev, &rawir);
}
static void sz_push_full_pulse(struct streamzap_ir *sz,
rawir.duration *= 1000;
rawir.duration &= IR_MAX_DURATION;
}
- dev_dbg(sz->dev, "ls %u\n", rawir.duration);
sz_push(sz, rawir);
sz->idle = false;
sz->sum += rawir.duration;
rawir.duration *= 1000;
rawir.duration &= IR_MAX_DURATION;
- dev_dbg(sz->dev, "p %u\n", rawir.duration);
sz_push(sz, rawir);
}
rawir.duration += SZ_RESOLUTION / 2;
sz->sum += rawir.duration;
rawir.duration *= 1000;
- dev_dbg(sz->dev, "s %u\n", rawir.duration);
sz_push(sz, rawir);
}
struct streamzap_ir *sz;
unsigned int i;
int len;
- static int timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
- IR_MAX_DURATION) | 0x03000000);
if (!urb)
return;
dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
for (i = 0; i < len; i++) {
- dev_dbg(sz->dev, "sz idx %d: %x\n",
+ dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
i, (unsigned char)sz->buf_in[i]);
switch (sz->decoder_state) {
case PulseSpace:
DEFINE_IR_RAW_EVENT(rawir);
rawir.pulse = false;
- rawir.duration = timeout;
+ rawir.duration = sz->props->timeout;
sz->idle = true;
if (sz->timeout_enabled)
sz_push(sz, rawir);
sz->props = props;
+ usb_to_input_id(sz->usbdev, &idev->id);
+ idev->dev.parent = sz->dev;
+
ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
if (ret < 0) {
dev_err(dev, "remote input device register failed\n");
sz->decoder_state = PulseSpace;
/* FIXME: don't yet have a way to set this */
sz->timeout_enabled = true;
+ sz->props->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
+ IR_MAX_DURATION) | 0x03000000);
#if 0
/* not yet supported, depends on patches from maxim */
/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
{
struct saa7146_vv *vv = dev->vv_data;
- struct saa7146_format *sfmt = format_by_fourcc(dev, pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
int b_depth = vv->ov_fmt->depth;
int b_bpl = vv->ov_fb.fmt.bytesperline;
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_video_dma vdma1;
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
int width = buf->fmt->width;
int height = buf->fmt->height;
struct saa7146_video_dma vdma2;
struct saa7146_video_dma vdma3;
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
int width = buf->fmt->width;
int height = buf->fmt->height;
void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
{
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_vv *vv = dev->vv_data;
u32 vdma1_prot_addr;
/*****************************************************************************/
/* i2c-adapter helper functions */
-#include <linux/i2c-id.h>
/* exported algorithm data */
static struct i2c_algorithm saa7146_algo = {
static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
{
int i, j = NUM_FORMATS;
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
struct scatterlist *list = dma->sglist;
int length = dma->sglen;
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
}
}
- fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
/* we need to have a valid format set here */
BUG_ON(NULL == fmt);
return -EBUSY;
}
- fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
/* we need to have a valid format set here */
BUG_ON(NULL == fmt);
return -EPERM;
/* check args */
- fmt = format_by_fourcc(dev, fb->fmt.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
if (NULL == fmt)
return -EINVAL;
DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
- fmt = format_by_fourcc(dev, f->fmt.pix.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
if (NULL == fmt)
return -EINVAL;
buf->fmt = &fh->video_fmt;
buf->vb.field = fh->video_fmt.field;
- sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
release_all_pagetables(dev, buf);
if( 0 != IS_PLANAR(sfmt->trans)) {
fh->video_fmt.pixelformat = V4L2_PIX_FMT_BGR24;
fh->video_fmt.bytesperline = 0;
fh->video_fmt.field = V4L2_FIELD_ANY;
- sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+ sfmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
videobuf_queue_sg_init(&fh->video_q, &video_qops,
select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-menuconfig MEDIA_TUNER_CUSTOMISE
+config MEDIA_TUNER_CUSTOMISE
bool "Customize analog and hybrid tuner modules to build"
depends on MEDIA_TUNER
default y if EMBEDDED
If unsure say N.
-if MEDIA_TUNER_CUSTOMISE
+menu "Customize TV tuners"
+ visible if MEDIA_TUNER_CUSTOMISE
config MEDIA_TUNER_SIMPLE
tristate "Simple tuner support"
default m if MEDIA_TUNER_CUSTOMISE
help
NXP TDA18218 silicon tuner driver.
-
-endif # MEDIA_TUNER_CUSTOMISE
+endmenu
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/kthread.h>
#include "dvb_ca_en50221.h"
#include <linux/list.h>
#include <linux/freezer.h>
#include <linux/jiffies.h>
-#include <linux/smp_lock.h>
#include <linux/kthread.h>
#include <asm/processor.h>
If unsure say N.
-if DVB_FE_CUSTOMISE
-
menu "Customise DVB Frontends"
+ visible if DVB_FE_CUSTOMISE
comment "Multistandard (satellite) frontends"
depends on DVB_CORE
tristate "Dummy frontend driver"
default n
endmenu
-
-endif
#include <linux/io.h>
#include <asm/div64.h>
#include <linux/pci.h>
-#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/byteorder/generic.h>
#include <linux/firmware.h>
#include <linux/io.h>
#include <asm/div64.h>
#include <linux/pci.h>
-#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/byteorder/generic.h>
#include <linux/firmware.h>
#include <asm/div64.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/byteorder/generic.h>
#include <linux/firmware.h>
static const struct v4l2_file_operations rtrack_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
rt->vdev.release = video_device_release_empty;
video_set_drvdata(&rt->vdev, rt);
- if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(&rt->v4l2_dev);
- release_region(rt->io, 2);
- return -EINVAL;
- }
- v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
-
/* Set up the I/O locking */
mutex_init(&rt->lock);
sleep_delay(2000000); /* make sure it's totally down */
outb(0xc0, rt->io); /* steady volume, mute card */
+ if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(&rt->v4l2_dev);
+ release_region(rt->io, 2);
+ return -EINVAL;
+ }
+ v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
+
return 0;
}
static const struct v4l2_file_operations aztech_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
az->vdev.ioctl_ops = &aztech_ioctl_ops;
az->vdev.release = video_device_release_empty;
video_set_drvdata(&az->vdev, az);
+ /* mute card - prevents noisy bootups */
+ outb(0, az->io);
if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
}
v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
- /* mute card - prevents noisy bootups */
- outb(0, az->io);
return 0;
}
unsigned char readbuf[RDS_BUFFER];
int i = 0;
+ mutex_lock(&dev->lock);
if (dev->rdsstat == 0) {
- mutex_lock(&dev->lock);
dev->rdsstat = 1;
outb(0x80, dev->io); /* Select RDS fifo */
- mutex_unlock(&dev->lock);
init_timer(&dev->readtimer);
dev->readtimer.function = cadet_handler;
dev->readtimer.data = (unsigned long)dev;
add_timer(&dev->readtimer);
}
if (dev->rdsin == dev->rdsout) {
+ mutex_unlock(&dev->lock);
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
interruptible_sleep_on(&dev->read_queue);
+ mutex_lock(&dev->lock);
}
while (i < count && dev->rdsin != dev->rdsout)
readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+ mutex_unlock(&dev->lock);
if (copy_to_user(data, readbuf, i))
return -EFAULT;
{
struct cadet *dev = video_drvdata(file);
+ mutex_lock(&dev->lock);
dev->users++;
if (1 == dev->users)
init_waitqueue_head(&dev->read_queue);
+ mutex_unlock(&dev->lock);
return 0;
}
{
struct cadet *dev = video_drvdata(file);
+ mutex_lock(&dev->lock);
dev->users--;
if (0 == dev->users) {
del_timer_sync(&dev->readtimer);
dev->rdsstat = 0;
}
+ mutex_unlock(&dev->lock);
return 0;
}
.open = cadet_open,
.release = cadet_release,
.read = cadet_read,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = cadet_poll,
};
static const struct v4l2_file_operations gemtek_pci_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
card->vdev.release = video_device_release_empty;
video_set_drvdata(&card->vdev, card);
+ gemtek_pci_mute(card);
+
if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0)
goto err_video;
- gemtek_pci_mute(card);
-
v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
pdev->revision, card->iobase, card->iobase + card->length - 1);
static const struct v4l2_file_operations gemtek_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int vidioc_querycap(struct file *file, void *priv,
gt->vdev.release = video_device_release_empty;
video_set_drvdata(>->vdev, gt);
- if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(gt->io, 1);
- return -EBUSY;
- }
-
/* Set defaults */
gt->lastfreq = GEMTEK_LOWFREQ;
gt->bu2614data = 0;
if (initmute)
gemtek_mute(gt);
+ if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(gt->io, 1);
+ return -EBUSY;
+ }
+
return 0;
}
static const struct v4l2_file_operations maestro_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+ if (!radio_power_on(dev)) {
+ retval = -EIO;
+ goto errfr1;
+ }
+
retval = video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr);
if (retval) {
v4l2_err(v4l2_dev, "can't register video device!\n");
goto errfr1;
}
- if (!radio_power_on(dev)) {
- retval = -EIO;
- goto errunr;
- }
-
v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n");
return 0;
-errunr:
- video_unregister_device(&dev->vdev);
errfr1:
v4l2_device_unregister(v4l2_dev);
errfr:
static const struct v4l2_file_operations maxiradio_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
unsigned long freq;
int muted;
struct snd_miro_aci *aci;
+ struct mutex lock;
};
static struct pcm20 pcm20_card = {
static const struct v4l2_file_operations pcm20_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int vidioc_querycap(struct file *file, void *priv,
return -ENODEV;
}
strlcpy(v4l2_dev->name, "miropcm20", sizeof(v4l2_dev->name));
-
+ mutex_init(&dev->lock);
res = v4l2_device_register(NULL, v4l2_dev);
if (res < 0) {
dev->vdev.fops = &pcm20_fops;
dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
dev->vdev.release = video_device_release_empty;
+ dev->vdev.lock = &dev->lock;
video_set_drvdata(&dev->vdev, dev);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
static const struct v4l2_file_operations rtrack2_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+ /* mute card - prevents noisy bootups */
+ outb(1, dev->io);
+ dev->muted = 1;
+
mutex_init(&dev->lock);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n");
- /* mute card - prevents noisy bootups */
- outb(1, dev->io);
- dev->muted = 1;
-
return 0;
}
static const struct v4l2_file_operations fmi_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
mutex_init(&fmi->lock);
+ /* mute card - prevents noisy bootups */
+ fmi_mute(fmi);
+
if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmi->io, 2);
}
v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
- /* mute card - prevents noisy bootups */
- fmi_mute(fmi);
return 0;
}
static const struct v4l2_file_operations fmr2_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
fmr2->vdev.release = video_device_release_empty;
video_set_drvdata(&fmr2->vdev, fmr2);
+ /* mute card - prevents noisy bootups */
+ fmr2_mute(fmr2->io);
+ fmr2_product_info(fmr2);
+
if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmr2->io, 2);
}
v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
- /* mute card - prevents noisy bootups */
- mutex_lock(&fmr2->lock);
- fmr2_mute(fmr2->io);
- fmr2_product_info(fmr2);
- mutex_unlock(&fmr2->lock);
debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
return 0;
}
/* radio_si4713_fops - file operations interface */
static const struct v4l2_file_operations radio_si4713_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ /* Note: locking is done at the subdev level in the i2c driver. */
+ .unlocked_ioctl = video_ioctl2,
};
/* Video4Linux Interface */
goto unregister_v4l2_dev;
}
- sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, NULL,
+ sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter,
pdata->subdev_board_info, NULL);
if (!sd) {
dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
struct video_device *videodev;
struct tea5764_regs regs;
struct mutex mutex;
- int users;
};
/* I2C code related */
return 0;
}
-static int tea5764_open(struct file *file)
-{
- /* Currently we support only one device */
- struct tea5764_device *radio = video_drvdata(file);
-
- mutex_lock(&radio->mutex);
- /* Only exclusive access */
- if (radio->users) {
- mutex_unlock(&radio->mutex);
- return -EBUSY;
- }
- radio->users++;
- mutex_unlock(&radio->mutex);
- file->private_data = radio;
- return 0;
-}
-
-static int tea5764_close(struct file *file)
-{
- struct tea5764_device *radio = video_drvdata(file);
-
- if (!radio)
- return -ENODEV;
- mutex_lock(&radio->mutex);
- radio->users--;
- mutex_unlock(&radio->mutex);
- return 0;
-}
-
/* File system interface */
static const struct v4l2_file_operations tea5764_fops = {
.owner = THIS_MODULE,
- .open = tea5764_open,
- .release = tea5764_close,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
int ret;
PDEBUG("probe");
- radio = kmalloc(sizeof(struct tea5764_device), GFP_KERNEL);
+ radio = kzalloc(sizeof(struct tea5764_device), GFP_KERNEL);
if (!radio)
return -ENOMEM;
i2c_set_clientdata(client, radio);
video_set_drvdata(radio->videodev, radio);
-
- ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
- if (ret < 0) {
- PWARN("Could not register video device!");
- goto errrel;
- }
+ radio->videodev->lock = &radio->mutex;
/* initialize and power off the chip */
tea5764_i2c_read(radio);
tea5764_mute(radio, 1);
tea5764_power_down(radio);
+ ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ if (ret < 0) {
+ PWARN("Could not register video device!");
+ goto errrel;
+ }
+
PINFO("registered.");
return 0;
errrel:
static const struct v4l2_file_operations terratec_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
mutex_init(&tt->lock);
+ /* mute card - prevents noisy bootups */
+ tt_write_vol(tt, 0);
+
if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&tt->v4l2_dev);
release_region(tt->io, 2);
}
v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n");
-
- /* mute card - prevents noisy bootups */
- tt_write_vol(tt, 0);
return 0;
}
struct v4l2_subdev *sd_dsp;
struct video_device video_dev;
struct v4l2_device v4l2_dev;
+ struct mutex lock;
};
static const struct v4l2_file_operations timbradio_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int __devinit timbradio_probe(struct platform_device *pdev)
}
tr->pdata = *pdata;
+ mutex_init(&tr->lock);
strlcpy(tr->video_dev.name, "Timberdale Radio",
sizeof(tr->video_dev.name));
tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
tr->video_dev.release = video_device_release_empty;
tr->video_dev.minor = -1;
+ tr->video_dev.lock = &tr->lock;
strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
err = v4l2_device_register(NULL, &tr->v4l2_dev);
static const struct v4l2_file_operations trust_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops trust_ioctl_ops = {
tr->vdev.release = video_device_release_empty;
video_set_drvdata(&tr->vdev, tr);
- if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(tr->io, 2);
- return -EINVAL;
- }
-
- v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
-
write_i2c(tr, 2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */
write_i2c(tr, 2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */
write_i2c(tr, 2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */
/* mute card - prevents noisy bootups */
tr_setmute(tr, 1);
+ if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(tr->io, 2);
+ return -EINVAL;
+ }
+
+ v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
+
return 0;
}
static const struct v4l2_file_operations typhoon_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
dev->io = io;
- dev->curfreq = dev->mutefreq = mutefreq;
if (dev->io == -1) {
v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
return -EINVAL;
}
- if (dev->mutefreq < 87000 || dev->mutefreq > 108500) {
+ if (mutefreq < 87000 || mutefreq > 108500) {
v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
return -EINVAL;
}
+ dev->curfreq = dev->mutefreq = mutefreq << 4;
mutex_init(&dev->lock);
if (!request_region(dev->io, 8, "typhoon")) {
dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+
+ /* mute card - prevents noisy bootups */
+ typhoon_mute(dev);
+
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&dev->v4l2_dev);
release_region(dev->io, 8);
return -EINVAL;
}
v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
- v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", dev->mutefreq);
- dev->mutefreq <<= 4;
-
- /* mute card - prevents noisy bootups */
- typhoon_mute(dev);
+ v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
return 0;
}
static const struct v4l2_file_operations zoltrix_fops =
{
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
return res;
}
- strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
- zol->vdev.v4l2_dev = v4l2_dev;
- zol->vdev.fops = &zoltrix_fops;
- zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
- zol->vdev.release = video_device_release_empty;
- video_set_drvdata(&zol->vdev, zol);
-
- if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(zol->io, 2);
- return -EINVAL;
- }
- v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
-
mutex_init(&zol->lock);
/* mute card - prevents noisy bootups */
zol->curvol = 0;
zol->stereo = 1;
+ strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
+ zol->vdev.v4l2_dev = v4l2_dev;
+ zol->vdev.fops = &zoltrix_fops;
+ zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
+ zol->vdev.release = video_device_release_empty;
+ video_set_drvdata(&zol->vdev, zol);
+
+ if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(zol->io, 2);
+ return -EINVAL;
+ }
+ v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
+
return 0;
}
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/version.h>
#include <linux/videodev2.h>
#
menu "Encoders/decoders and other helper chips"
- depends on !VIDEO_HELPER_CHIPS_AUTO
+ visible if !VIDEO_HELPER_CHIPS_AUTO
comment "Audio decoders"
static const struct v4l2_file_operations ar_fops = {
.owner = THIS_MODULE,
.read = ar_read,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops ar_ioctl_ops = {
be abstracted out if we ever need to support a different
demod) */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "au8522", 0x8e >> 1, NULL);
+ "au8522", 0x8e >> 1, NULL);
if (sd == NULL)
printk(KERN_ERR "analog subdev registration failed\n");
}
if (dev->board.tuner_type != TUNER_ABSENT) {
/* Load the tuner module, which does the attach */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->board.tuner_addr, NULL);
+ "tuner", dev->board.tuner_addr, NULL);
if (sd == NULL)
printk(KERN_ERR "tuner subdev registration fail\n");
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "saa6588", 0, addrs);
+ &btv->c.i2c_adap, "saa6588", 0, addrs);
btv->has_saa6588 = (sd != NULL);
}
};
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400", 0, addrs);
+ &btv->c.i2c_adap, "msp3400", 0, addrs);
if (btv->sd_msp34xx)
return;
goto no_audio;
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
return;
goto no_audio;
}
case 3: {
/* The user specified that we should probe for tvaudio */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
goto no_audio;
found is really something else (e.g. a tea6300). */
if (!bttv_tvcards[btv->c.type].no_msp34xx) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400",
+ &btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400",
+ &btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
}
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
return;
}
/* Now see if we can find one of the tvaudio devices. */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
/* Load tuner module before issuing tuner config call! */
if (bttv_tvcards[btv->c.type].has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include "bttvp.h"
xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM;
/* is it free? */
- mutex_lock(&btv->lock);
if (btv->resources & xbits) {
/* no, someone else uses it */
goto fail;
/* it's free, grab it */
fh->resources |= bit;
btv->resources |= bit;
- mutex_unlock(&btv->lock);
return 1;
fail:
- mutex_unlock(&btv->lock);
return 0;
}
/* trying to free ressources not allocated by us ... */
printk("bttv: BUG! (btres)\n");
}
- mutex_lock(&btv->lock);
fh->resources &= ~bits;
btv->resources &= ~bits;
if (0 == (bits & VBI_RESOURCES))
disclaim_vbi_lines(btv);
-
- mutex_unlock(&btv->lock);
}
/* ----------------------------------------------------------------------- */
/* Make sure tvnorm and vbi_end remain consistent
until we're done. */
- mutex_lock(&btv->lock);
norm = btv->tvnorm;
/* In this mode capturing always starts at defrect.top
(default VDELAY), ignoring cropping parameters. */
if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) {
- mutex_unlock(&btv->lock);
return -EINVAL;
}
- mutex_unlock(&btv->lock);
-
c.rect = bttv_tvnorms[norm].cropcap.defrect;
} else {
- mutex_lock(&btv->lock);
-
norm = btv->tvnorm;
c = btv->crop[!!fh->do_crop];
- mutex_unlock(&btv->lock);
-
if (width < c.min_scaled_width ||
width > c.max_scaled_width ||
height < c.min_scaled_height)
unsigned int i;
int err;
- mutex_lock(&btv->lock);
err = v4l2_prio_check(&btv->prio, fh->prio);
if (err)
goto err;
set_tvnorm(btv, i);
err:
- mutex_unlock(&btv->lock);
return err;
}
struct bttv *btv = fh->btv;
int rc = 0;
- mutex_lock(&btv->lock);
if (i->index >= bttv_tvcards[btv->c.type].video_inputs) {
rc = -EINVAL;
goto err;
i->std = BTTV_NORMS;
err:
- mutex_unlock(&btv->lock);
return rc;
}
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
*i = btv->input;
- mutex_unlock(&btv->lock);
return 0;
}
int err;
- mutex_lock(&btv->lock);
err = v4l2_prio_check(&btv->prio, fh->prio);
if (unlikely(err))
goto err;
set_input(btv, i, btv->tvnorm);
err:
- mutex_unlock(&btv->lock);
return 0;
}
if (unlikely(0 != t->index))
return -EINVAL;
- mutex_lock(&btv->lock);
if (unlikely(btv->tuner_type == TUNER_ABSENT)) {
err = -EINVAL;
goto err;
btv->audio_mode_gpio(btv, t, 1);
err:
- mutex_unlock(&btv->lock);
return 0;
}
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = btv->freq;
- mutex_unlock(&btv->lock);
return 0;
}
if (unlikely(f->tuner != 0))
return -EINVAL;
- mutex_lock(&btv->lock);
err = v4l2_prio_check(&btv->prio, fh->prio);
if (unlikely(err))
goto err;
if (btv->has_matchbox && btv->radio_user)
tea5757_set_freq(btv, btv->freq);
err:
- mutex_unlock(&btv->lock);
return 0;
}
/* Make sure tvnorm, vbi_end and the current cropping parameters
remain consistent until we're done. */
- mutex_lock(&btv->lock);
b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds;
rc = 0; /* success */
fail:
- mutex_unlock(&btv->lock);
return rc;
}
if (V4L2_FIELD_ANY == field) {
__s32 height2;
- mutex_lock(&fh->btv->lock);
height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1;
- mutex_unlock(&fh->btv->lock);
field = (win->w.height > height2)
? V4L2_FIELD_INTERLACED
: V4L2_FIELD_TOP;
}
}
- mutex_lock(&fh->cap.vb_lock);
/* clip against screen */
if (NULL != btv->fbuf.base)
n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height,
fh->ov.field = win->field;
fh->ov.setup_ok = 1;
- /*
- * FIXME: btv is protected by btv->lock mutex, while btv->init
- * is protected by fh->cap.vb_lock. This seems to open the
- * possibility for some race situations. Maybe the better would
- * be to unify those locks or to use another way to store the
- * init values that will be consumed by videobuf callbacks
- */
btv->init.ov.w.width = win->w.width;
btv->init.ov.w.height = win->w.height;
btv->init.ov.field = win->field;
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
retval = bttv_switch_overlay(btv,fh,new);
}
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
if (V4L2_FIELD_ANY == field) {
__s32 height2;
- mutex_lock(&btv->lock);
height2 = btv->crop[!!fh->do_crop].rect.height >> 1;
- mutex_unlock(&btv->lock);
field = (f->fmt.pix.height > height2)
? V4L2_FIELD_INTERLACED
: V4L2_FIELD_BOTTOM;
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
/* update our state informations */
- mutex_lock(&fh->cap.vb_lock);
fh->fmt = fmt;
fh->cap.field = f->fmt.pix.field;
fh->cap.last = V4L2_FIELD_NONE;
btv->init.fmt = fmt;
btv->init.width = f->fmt.pix.width;
btv->init.height = f->fmt.pix.height;
- mutex_unlock(&fh->cap.vb_lock);
return 0;
}
unsigned int i;
struct bttv_fh *fh = priv;
- mutex_lock(&fh->cap.vb_lock);
retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
V4L2_MEMORY_MMAP);
if (retval < 0) {
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
for (i = 0; i < gbuffers; i++)
mbuf->offsets[i] = i * gbufsize;
- mutex_unlock(&fh->cap.vb_lock);
return 0;
}
#endif
int retval = 0;
if (on) {
- mutex_lock(&fh->cap.vb_lock);
/* verify args */
if (unlikely(!btv->fbuf.base)) {
- mutex_unlock(&fh->cap.vb_lock);
return -EINVAL;
}
if (unlikely(!fh->ov.setup_ok)) {
}
if (retval)
return retval;
- mutex_unlock(&fh->cap.vb_lock);
}
if (!check_alloc_btres_lock(btv, fh, RESOURCE_OVERLAY))
return -EBUSY;
- mutex_lock(&fh->cap.vb_lock);
if (on) {
fh->ov.tvnorm = btv->tvnorm;
new = videobuf_sg_alloc(sizeof(*new));
/* switch over */
retval = bttv_switch_overlay(btv, fh, new);
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
}
/* ok, accept it */
- mutex_lock(&fh->cap.vb_lock);
btv->fbuf.base = fb->base;
btv->fbuf.fmt.width = fb->fmt.width;
btv->fbuf.fmt.height = fb->fmt.height;
retval = bttv_switch_overlay(btv, fh, new);
}
}
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
c->id >= V4L2_CID_PRIVATE_LASTP1))
return -EINVAL;
- mutex_lock(&btv->lock);
if (!btv->volume_gpio && (c->id == V4L2_CID_AUDIO_VOLUME))
*c = no_ctl;
else {
*c = (NULL != ctrl) ? *ctrl : no_ctl;
}
- mutex_unlock(&btv->lock);
return 0;
}
struct bttv_fh *fh = f;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id,
&parm->parm.capture.timeperframe);
- mutex_unlock(&btv->lock);
return 0;
}
if (0 != t->index)
return -EINVAL;
- mutex_lock(&btv->lock);
t->rxsubchans = V4L2_TUNER_SUB_MONO;
bttv_call_all(btv, tuner, g_tuner, t);
strcpy(t->name, "Television");
if (btv->audio_mode_gpio)
btv->audio_mode_gpio(btv, t, 0);
- mutex_unlock(&btv->lock);
return 0;
}
struct bttv_fh *fh = f;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
*p = v4l2_prio_max(&btv->prio);
- mutex_unlock(&btv->lock);
return 0;
}
struct bttv *btv = fh->btv;
int rc;
- mutex_lock(&btv->lock);
rc = v4l2_prio_change(&btv->prio, &fh->prio, prio);
- mutex_unlock(&btv->lock);
return rc;
}
cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
return -EINVAL;
- mutex_lock(&btv->lock);
*cap = bttv_tvnorms[btv->tvnorm].cropcap;
- mutex_unlock(&btv->lock);
return 0;
}
inconsistent with fh->width or fh->height and apps
do not expect a change here. */
- mutex_lock(&btv->lock);
crop->c = btv->crop[!!fh->do_crop].rect;
- mutex_unlock(&btv->lock);
return 0;
}
/* Make sure tvnorm, vbi_end and the current cropping
parameters remain consistent until we're done. Note
read() may change vbi_end in check_alloc_btres_lock(). */
- mutex_lock(&btv->lock);
retval = v4l2_prio_check(&btv->prio, fh->prio);
if (0 != retval) {
- mutex_unlock(&btv->lock);
return retval;
}
retval = -EBUSY;
if (locked_btres(fh->btv, VIDEO_RESOURCES)) {
- mutex_unlock(&btv->lock);
return retval;
}
b_top = max(b->top, btv->vbi_end);
if (b_top + 32 >= b_bottom) {
- mutex_unlock(&btv->lock);
return retval;
}
btv->crop[1] = c;
- mutex_unlock(&btv->lock);
-
fh->do_crop = 1;
- mutex_lock(&fh->cap.vb_lock);
-
if (fh->width < c.min_scaled_width) {
fh->width = c.min_scaled_width;
btv->init.width = c.min_scaled_width;
btv->init.height = c.max_scaled_height;
}
- mutex_unlock(&fh->cap.vb_lock);
-
return 0;
}
return videobuf_poll_stream(file, &fh->vbi, wait);
}
- mutex_lock(&fh->cap.vb_lock);
if (check_btres(fh,RESOURCE_VIDEO_STREAM)) {
/* streaming capture */
if (list_empty(&fh->cap.stream))
else
rc = 0;
err:
- mutex_unlock(&fh->cap.vb_lock);
return rc;
}
return -ENOMEM;
file->private_data = fh;
- /*
- * btv is protected by btv->lock mutex, while btv->init and other
- * streaming vars are protected by fh->cap.vb_lock. We need to take
- * care of both locks to avoid troubles. However, vb_lock is used also
- * inside videobuf, without calling buf->lock. So, it is a very bad
- * idea to hold both locks at the same time.
- * Let's first copy btv->init at fh, holding cap.vb_lock, and then work
- * with the rest of init, holding btv->lock.
- */
- mutex_lock(&fh->cap.vb_lock);
*fh = btv->init;
- mutex_unlock(&fh->cap.vb_lock);
fh->type = type;
fh->ov.setup_ok = 0;
- mutex_lock(&btv->lock);
v4l2_prio_open(&btv->prio, &fh->prio);
videobuf_queue_sg_init(&fh->cap, &bttv_video_qops,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct bttv_buffer),
- fh, NULL);
+ fh, &btv->lock);
videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops,
&btv->c.pci->dev, &btv->s_lock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
sizeof(struct bttv_buffer),
- fh, NULL);
+ fh, &btv->lock);
set_tvnorm(btv,btv->tvnorm);
set_input(btv, btv->input, btv->tvnorm);
bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm);
bttv_field_count(btv);
- mutex_unlock(&btv->lock);
return 0;
}
struct bttv_fh *fh = file->private_data;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
/* turn off overlay */
if (check_btres(fh, RESOURCE_OVERLAY))
bttv_switch_overlay(btv,fh,NULL);
/* free stuff */
- /*
- * videobuf uses cap.vb_lock - we should avoid holding btv->lock,
- * otherwise we may have dead lock conditions
- */
- mutex_unlock(&btv->lock);
videobuf_mmap_free(&fh->cap);
videobuf_mmap_free(&fh->vbi);
- mutex_lock(&btv->lock);
v4l2_prio_close(&btv->prio, fh->prio);
file->private_data = NULL;
kfree(fh);
if (!btv->users)
audio_mute(btv, 1);
- mutex_unlock(&btv->lock);
return 0;
}
if (unlikely(!fh))
return -ENOMEM;
file->private_data = fh;
- mutex_lock(&fh->cap.vb_lock);
*fh = btv->init;
- mutex_unlock(&fh->cap.vb_lock);
- mutex_lock(&btv->lock);
v4l2_prio_open(&btv->prio, &fh->prio);
btv->radio_user++;
bttv_call_all(btv, tuner, s_radio);
audio_input(btv,TVAUDIO_INPUT_RADIO);
- mutex_unlock(&btv->lock);
return 0;
}
struct bttv *btv = fh->btv;
struct rds_command cmd;
- mutex_lock(&btv->lock);
v4l2_prio_close(&btv->prio, fh->prio);
file->private_data = NULL;
kfree(fh);
btv->radio_user--;
bttv_call_all(btv, core, ioctl, RDS_CMD_CLOSE, &cmd);
- mutex_unlock(&btv->lock);
return 0;
}
return -EINVAL;
if (0 != t->index)
return -EINVAL;
- mutex_lock(&btv->lock);
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
if (btv->audio_mode_gpio)
btv->audio_mode_gpio(btv, t, 0);
- mutex_unlock(&btv->lock);
-
return 0;
}
.open = radio_open,
.read = radio_read,
.release = radio_release,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = radio_poll,
};
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
.read = cafe_v4l_read,
.poll = cafe_v4l_poll,
.mmap = cafe_v4l_mmap,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
cam->sensor_addr = 0x42;
cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter,
- "ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr,
- NULL);
+ "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL);
if (cam->sensor == NULL) {
ret = -ENODEV;
goto out_smbus;
static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream,
unsigned int cmd, void *arg)
{
- return snd_pcm_lib_ioctl(substream, cmd, arg);
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+ int ret;
+
+ snd_cx18_lock(cxsc);
+ ret = snd_pcm_lib_ioctl(substream, cmd, arg);
+ snd_cx18_unlock(cxsc);
+ return ret;
}
if (hw == CX18_HW_TUNER) {
/* special tuner group handling */
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->radio);
+ adap, type, 0, cx->card_i2c->radio);
if (sd != NULL)
sd->grp_id = hw;
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->demod);
+ adap, type, 0, cx->card_i2c->demod);
if (sd != NULL)
sd->grp_id = hw;
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->tv);
+ adap, type, 0, cx->card_i2c->tv);
if (sd != NULL)
sd->grp_id = hw;
return sd != NULL ? 0 : -1;
return -1;
/* It's an I2C device other than an analog tuner or IR chip */
- sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, NULL, type, hw_addrs[idx],
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx],
NULL);
if (sd != NULL)
sd->grp_id = hw;
.read = cx18_v4l2_read,
.open = cx18_v4l2_open,
/* FIXME change to video_ioctl2 if serialization lock can be removed */
- .ioctl = cx18_v4l2_ioctl,
+ .unlocked_ioctl = cx18_v4l2_ioctl,
.release = cx18_v4l2_close,
.poll = cx18_v4l2_enc_poll,
};
if (dev->board.decoder == CX231XX_AVDECODER) {
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[0].i2c_adap,
- NULL, "cx25840", 0x88 >> 1, NULL);
+ "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
cx231xx_info("cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
if (dev->board.tuner_type != TUNER_ABSENT) {
dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
- NULL, "tuner",
+ "tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
cx231xx_info("tuner subdev registration failure\n");
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
- NULL, "cx25840", 0x88 >> 1, NULL);
+ "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840) {
dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
if (dev->tuner_addr)
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
else
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_bus[1].i2c_adap, NULL,
+ &dev->i2c_bus[1].i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
if (sd) {
struct tuner_setup tun_setup;
v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
V4L2_CID_HUE, -128, 127, 1, 0);
if (!is_cx2583x(state)) {
- default_volume = 228 - cx25840_read(client, 0x8d4);
- default_volume = ((default_volume / 2) + 23) << 9;
+ default_volume = cx25840_read(client, 0x8d4);
+ /*
+ * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume
+ * scale mapping limits to avoid -ERANGE errors when
+ * initializing the volume control
+ */
+ if (default_volume > 228) {
+ /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
+ default_volume = 228;
+ cx25840_write(client, 0x8d4, 228);
+ }
+ else if (default_volume < 20) {
+ /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
+ default_volume = 20;
+ cx25840_write(client, 0x8d4, 20);
+ }
+ default_volume = (((228 - default_volume) >> 1) + 23) << 9;
state->volume = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
#include <sound/control.h>
#include <sound/initval.h>
#include <sound/tlv.h>
-#include <media/wm8775.h>
#include "cx88.h"
#include "cx88-reg.h"
int left, right, v, b;
int changed = 0;
u32 old;
- struct v4l2_control client_ctl;
-
- /* Pass volume & balance onto any WM8775 */
- if (value->value.integer.value[0] >= value->value.integer.value[1]) {
- v = value->value.integer.value[0] << 10;
- b = value->value.integer.value[0] ?
- (0x8000 * value->value.integer.value[1]) / value->value.integer.value[0] :
- 0x8000;
- } else {
- v = value->value.integer.value[1] << 10;
- b = value->value.integer.value[1] ?
- 0xffff - (0x8000 * value->value.integer.value[0]) / value->value.integer.value[1] :
- 0x8000;
- }
- client_ctl.value = v;
- client_ctl.id = V4L2_CID_AUDIO_VOLUME;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
- client_ctl.value = b;
- client_ctl.id = V4L2_CID_AUDIO_BALANCE;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
left = value->value.integer.value[0] & 0x3f;
right = value->value.integer.value[1] & 0x3f;
b = right - left;
if (b < 0) {
- v = 0x3f - left;
- b = (-b) | 0x40;
+ v = 0x3f - left;
+ b = (-b) | 0x40;
} else {
- v = 0x3f - right;
+ v = 0x3f - right;
}
/* Do we really know this will always be called with IRQs on? */
spin_lock_irq(&chip->reg_lock);
old = cx_read(AUD_VOL_CTL);
if (v != (old & 0x3f)) {
- cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v);
- changed = 1;
+ cx_write(AUD_VOL_CTL, (old & ~0x3f) | v);
+ changed = 1;
}
- if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) {
- cx_write(AUD_BAL_CTL, b);
- changed = 1;
+ if (cx_read(AUD_BAL_CTL) != b) {
+ cx_write(AUD_BAL_CTL, b);
+ changed = 1;
}
spin_unlock_irq(&chip->reg_lock);
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Analog-TV Volume",
+ .name = "Playback Volume",
.info = snd_cx88_volume_info,
.get = snd_cx88_volume_get,
.put = snd_cx88_volume_put,
vol = cx_read(AUD_VOL_CTL);
if (value->value.integer.value[0] != !(vol & bit)) {
vol ^= bit;
- cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
- /* Pass mute onto any WM8775 */
- if ((1<<6) == bit) {
- struct v4l2_control client_ctl;
- client_ctl.value = 0 != (vol & bit);
- client_ctl.id = V4L2_CID_AUDIO_MUTE;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
- }
+ cx_write(AUD_VOL_CTL, vol);
ret = 1;
}
spin_unlock_irq(&chip->reg_lock);
static const struct snd_kcontrol_new snd_cx88_dac_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Audio-Out Switch",
+ .name = "Playback Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_cx88_switch_get,
.put = snd_cx88_switch_put,
static const struct snd_kcontrol_new snd_cx88_source_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Analog-TV Switch",
+ .name = "Capture Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_cx88_switch_get,
.put = snd_cx88_switch_put,
.private_value = (1<<6),
};
-static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
- struct cx88_core *core = chip->core;
- struct v4l2_control client_ctl;
-
- client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
- call_hw(core, WM8775_GID, core, g_ctrl, &client_ctl);
- value->value.integer.value[0] = client_ctl.value ? 1 : 0;
-
- return 0;
-}
-
-static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
- struct cx88_core *core = chip->core;
- struct v4l2_control client_ctl;
-
- client_ctl.value = 0 != value->value.integer.value[0];
- client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
- return 0;
-}
-
-static struct snd_kcontrol_new snd_cx88_alc_switch = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Line-In ALC Switch",
- .info = snd_ctl_boolean_mono_info,
- .get = snd_cx88_alc_get,
- .put = snd_cx88_alc_put,
-};
-
/****************************************************************************
Basic Flow for Sound Devices
****************************************************************************/
{
struct snd_card *card;
snd_cx88_card_t *chip;
- struct v4l2_subdev *sd;
int err;
if (devno >= SNDRV_CARDS)
if (err < 0)
goto error;
- /* If there's a wm8775 then add a Line-In ALC switch */
- list_for_each_entry(sd, &chip->core->v4l2_dev.subdevs, list) {
- if (WM8775_GID == sd->grp_id) {
- snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch,
- chip));
- break;
- }
- }
-
strcpy (card->driver, "CX88x");
sprintf(card->shortname, "Conexant CX%x", pci->device);
sprintf(card->longname, "%s at %#llx",
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
-#include <linux/smp_lock.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/cx2341x.h>
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
.mpeg = CX88_MPEG_DVB,
},
later code configures a tea5767.
*/
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "tuner",
- 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
if (has_demod)
v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap, NULL, "tuner",
+ &core->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (core->board.tuner_addr == ADDR_UNSET) {
v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap, NULL, "tuner",
+ &core->i2c_adap, "tuner",
0, has_demod ? tv_addrs + 4 : tv_addrs);
} else {
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "tuner", core->board.tuner_addr, NULL);
+ "tuner", core->board.tuner_addr, NULL);
}
}
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include "cx88.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
-#include <media/wm8775.h>
MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
const struct cx88_ctrl *c = NULL;
u32 value,mask;
int i;
- struct v4l2_control client_ctl;
for (i = 0; i < CX8800_CTLS; i++) {
if (cx8800_ctls[i].v.id == ctl->id) {
ctl->value = c->v.minimum;
if (ctl->value > c->v.maximum)
ctl->value = c->v.maximum;
-
- /* Pass changes onto any WM8775 */
- client_ctl.id = ctl->id;
- switch (ctl->id) {
- case V4L2_CID_AUDIO_MUTE:
- client_ctl.value = ctl->value;
- break;
- case V4L2_CID_AUDIO_VOLUME:
- client_ctl.value = (ctl->value) ?
- (0x90 + ctl->value) << 8 : 0;
- break;
- case V4L2_CID_AUDIO_BALANCE:
- client_ctl.value = ctl->value << 9;
- break;
- default:
- client_ctl.id = 0;
- break;
- }
- if (client_ctl.id)
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
mask=c->mask;
switch (ctl->id) {
case V4L2_CID_AUDIO_BALANCE:
if (c->id < V4L2_CID_BASE ||
c->id >= V4L2_CID_LASTP1)
return -EINVAL;
- if (c->id == V4L2_CID_AUDIO_MUTE ||
- c->id == V4L2_CID_AUDIO_VOLUME ||
- c->id == V4L2_CID_AUDIO_BALANCE) {
+ if (c->id == V4L2_CID_AUDIO_MUTE) {
for (i = 0; i < CX8800_CTLS; i++) {
if (cx8800_ctls[i].v.id == c->id)
break;
if (core->board.audio_chip == V4L2_IDENT_WM8775)
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "wm8775", 0x36 >> 1, NULL);
+ "wm8775", 0x36 >> 1, NULL);
if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
/* This probes for a tda9874 as is used on some
Pixelview Ultra boards. */
- v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap,
- NULL, "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
+ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+ "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
}
switch (core->boardnr) {
return container_of(v4l2_dev, struct cx88_core, v4l2_dev);
}
-#define call_hw(core, grpid, o, f, args...) \
+#define call_all(core, o, f, args...) \
do { \
if (!core->i2c_rc) { \
if (core->gate_ctrl) \
core->gate_ctrl(core, 1); \
- v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \
+ v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \
if (core->gate_ctrl) \
core->gate_ctrl(core, 0); \
} \
} while (0)
-#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args)
-
struct cx8800_dev;
struct cx8802_dev;
vpfe_dev->sd[i] =
v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
i2c_adap,
- NULL,
&sdinfo->board_info,
NULL);
if (vpfe_dev->sd[i]) {
vpif_obj.sd[i] =
v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
i2c_adap,
- NULL,
&subdevdata->board_info,
NULL);
for (i = 0; i < subdev_count; i++) {
vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
- i2c_adap, NULL,
+ i2c_adap,
&subdevdata[i].board_info,
NULL);
if (!vpif_obj.sd[i]) {
/* request some modules */
if (dev->board.has_msp34xx)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "msp3400", 0, msp3400_addrs);
+ "msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "saa7115_auto", 0, saa711x_addrs);
+ "saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvp5150", 0, tvp5150_addrs);
+ "tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "mt9v011", 0, mt9v011_addrs);
+ &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs);
v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
}
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvaudio", dev->board.tvaudio_addr, NULL);
+ "tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->board.radio_addr, NULL);
+ "tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
}
}
.owner = THIS_MODULE,
.open = em28xx_v4l2_open,
.release = em28xx_v4l2_close,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops radio_ioctl_ops = {
.owner = THIS_MODULE,
.open = et61x251_open,
.release = et61x251_release,
- .ioctl = et61x251_ioctl,
+ .unlocked_ioctl = et61x251_ioctl,
.read = et61x251_read,
.poll = et61x251_poll,
.mmap = et61x251_mmap,
ad = i2c_get_adapter(0);
viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad,
- NULL, "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
+ "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
viu_dev->vidq.timeout.function = viu_vid_timeout;
viu_dev->vidq.timeout.data = (unsigned long)viu_dev;
#define QUALITY_DEF 80
u8 jpegqual; /* webcam quality */
+ u8 reg01;
+ u8 reg17;
u8 reg18;
+ u8 flags;
s8 ag_cnt;
#define AG_CNT_START 13
SENSOR_SP80708,
};
+/* device flags */
+#define PDN_INV 1 /* inverse pin S_PWR_DN / sn_xxx tables */
+
+/* sn9c1xx definitions */
+/* register 0x01 */
+#define S_PWR_DN 0x01 /* sensor power down */
+#define S_PDN_INV 0x02 /* inverse pin S_PWR_DN */
+#define V_TX_EN 0x04 /* video transfer enable */
+#define LED 0x08 /* output to pin LED */
+#define SCL_SEL_OD 0x20 /* open-drain mode */
+#define SYS_SEL_48M 0x40 /* system clock 0: 24MHz, 1: 48MHz */
+/* register 0x17 */
+#define MCK_SIZE_MASK 0x1f /* sensor master clock */
+#define SEN_CLK_EN 0x20 /* enable sensor clock */
+#define DEF_EN 0x80 /* defect pixel by 0: soft, 1: hard */
+
/* V4L2 controls supported by the driver */
static void setbrightness(struct gspca_dev *gspca_dev);
static void setcontrast(struct gspca_dev *gspca_dev);
}
}
-static void bridge_init(struct gspca_dev *gspca_dev,
- const u8 *sn9c1xx)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 reg0102[2];
- const u8 *reg9a;
- static const u8 reg9a_def[] =
- {0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
- static const u8 reg9a_spec[] =
- {0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
- static const u8 regd4[] = {0x60, 0x00, 0x00};
-
- /* sensor clock already enabled in sd_init */
- /* reg_w1(gspca_dev, 0xf1, 0x00); */
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
-
- /* configure gpio */
- reg0102[0] = sn9c1xx[1];
- reg0102[1] = sn9c1xx[2];
- if (gspca_dev->audio)
- reg0102[1] |= 0x04; /* keep the audio connection */
- reg_w(gspca_dev, 0x01, reg0102, 2);
- reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
- reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
- switch (sd->sensor) {
- case SENSOR_GC0307:
- case SENSOR_OV7660:
- case SENSOR_PO1030:
- case SENSOR_PO2030N:
- case SENSOR_SOI768:
- case SENSOR_SP80708:
- reg9a = reg9a_spec;
- break;
- default:
- reg9a = reg9a_def;
- break;
- }
- reg_w(gspca_dev, 0x9a, reg9a, 6);
-
- reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
-
- reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
-
- switch (sd->sensor) {
- case SENSOR_ADCM1700:
- reg_w1(gspca_dev, 0x01, 0x43);
- reg_w1(gspca_dev, 0x17, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_GC0307:
- msleep(50);
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x22);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- msleep(50);
- break;
- case SENSOR_MI0360B:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x60);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_MT9V111:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x61);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_OM6802:
- msleep(10);
- reg_w1(gspca_dev, 0x02, 0x73);
- reg_w1(gspca_dev, 0x17, 0x60);
- reg_w1(gspca_dev, 0x01, 0x22);
- msleep(100);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x17, 0x64);
- reg_w1(gspca_dev, 0x17, 0x64);
- reg_w1(gspca_dev, 0x01, 0x42);
- msleep(10);
- reg_w1(gspca_dev, 0x01, 0x42);
- i2c_w8(gspca_dev, om6802_init0[0]);
- i2c_w8(gspca_dev, om6802_init0[1]);
- msleep(15);
- reg_w1(gspca_dev, 0x02, 0x71);
- msleep(150);
- break;
- case SENSOR_OV7630:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0xe2);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_OV7648:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_PO1030:
- case SENSOR_SOI768:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_PO2030N:
- case SENSOR_OV7660:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_SP80708:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- msleep(100);
- reg_w1(gspca_dev, 0x02, 0x62);
- break;
- default:
-/* case SENSOR_HV7131R: */
-/* case SENSOR_MI0360: */
-/* case SENSOR_MO4000: */
- reg_w1(gspca_dev, 0x01, 0x43);
- reg_w1(gspca_dev, 0x17, 0x61);
- reg_w1(gspca_dev, 0x01, 0x42);
- if (sd->sensor == SENSOR_HV7131R)
- hv7131r_probe(gspca_dev);
- break;
- }
-}
-
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
struct cam *cam;
sd->bridge = id->driver_info >> 16;
- sd->sensor = id->driver_info;
+ sd->sensor = id->driver_info >> 8;
+ sd->flags = id->driver_info;
cam = &gspca_dev->cam;
if (sd->sensor == SENSOR_ADCM1700) {
/* setup a selector by bridge */
reg_w1(gspca_dev, 0xf1, 0x01);
reg_r(gspca_dev, 0x00, 1);
- reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
+ reg_w1(gspca_dev, 0xf1, 0x00);
reg_r(gspca_dev, 0x00, 1); /* get sonix chip id */
regF1 = gspca_dev->usb_buf[0];
if (gspca_dev->usb_err < 0)
{
struct sd *sd = (struct sd *) gspca_dev;
int i;
- u8 reg1, reg17;
+ u8 reg01, reg17;
+ u8 reg0102[2];
const u8 *sn9c1xx;
const u8 (*init)[8];
+ const u8 *reg9a;
int mode;
+ static const u8 reg9a_def[] =
+ {0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
+ static const u8 reg9a_spec[] =
+ {0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
+ static const u8 regd4[] = {0x60, 0x00, 0x00};
static const u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
static const u8 CA_adcm1700[] =
/* initialize the bridge */
sn9c1xx = sn_tb[sd->sensor];
- bridge_init(gspca_dev, sn9c1xx);
+
+ /* sensor clock already enabled in sd_init */
+ /* reg_w1(gspca_dev, 0xf1, 0x00); */
+ reg01 = sn9c1xx[1];
+ if (sd->flags & PDN_INV)
+ reg01 ^= S_PDN_INV; /* power down inverted */
+ reg_w1(gspca_dev, 0x01, reg01);
+
+ /* configure gpio */
+ reg0102[0] = reg01;
+ reg0102[1] = sn9c1xx[2];
+ if (gspca_dev->audio)
+ reg0102[1] |= 0x04; /* keep the audio connection */
+ reg_w(gspca_dev, 0x01, reg0102, 2);
+ reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
+ reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
+ switch (sd->sensor) {
+ case SENSOR_GC0307:
+ case SENSOR_OV7660:
+ case SENSOR_PO1030:
+ case SENSOR_PO2030N:
+ case SENSOR_SOI768:
+ case SENSOR_SP80708:
+ reg9a = reg9a_spec;
+ break;
+ default:
+ reg9a = reg9a_def;
+ break;
+ }
+ reg_w(gspca_dev, 0x9a, reg9a, 6);
+
+ reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
+
+ reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
+
+ reg17 = sn9c1xx[0x17];
+ switch (sd->sensor) {
+ case SENSOR_GC0307:
+ msleep(50); /*fixme: is it useful? */
+ break;
+ case SENSOR_OM6802:
+ msleep(10);
+ reg_w1(gspca_dev, 0x02, 0x73);
+ reg17 |= SEN_CLK_EN;
+ reg_w1(gspca_dev, 0x17, reg17);
+ reg_w1(gspca_dev, 0x01, 0x22);
+ msleep(100);
+ reg01 = SCL_SEL_OD | S_PDN_INV;
+ reg17 &= MCK_SIZE_MASK;
+ reg17 |= 0x04; /* clock / 4 */
+ break;
+ }
+ reg01 |= SYS_SEL_48M;
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg17 |= SEN_CLK_EN;
+ reg_w1(gspca_dev, 0x17, reg17);
+ reg01 &= ~S_PWR_DN; /* sensor power on */
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 &= ~SYS_SEL_48M;
+ reg_w1(gspca_dev, 0x01, reg01);
+
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ hv7131r_probe(gspca_dev); /*fixme: is it useful? */
+ break;
+ case SENSOR_OM6802:
+ msleep(10);
+ reg_w1(gspca_dev, 0x01, reg01);
+ i2c_w8(gspca_dev, om6802_init0[0]);
+ i2c_w8(gspca_dev, om6802_init0[1]);
+ msleep(15);
+ reg_w1(gspca_dev, 0x02, 0x71);
+ msleep(150);
+ break;
+ case SENSOR_SP80708:
+ msleep(100);
+ reg_w1(gspca_dev, 0x02, 0x62);
+ break;
+ }
/* initialize the sensor */
i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
}
reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
switch (sd->sensor) {
- case SENSOR_GC0307:
- reg17 = 0xa2;
- break;
- case SENSOR_MT9V111:
- case SENSOR_MI0360B:
- reg17 = 0xe0;
- break;
- case SENSOR_ADCM1700:
- case SENSOR_OV7630:
- reg17 = 0xe2;
- break;
- case SENSOR_OV7648:
- reg17 = 0x20;
- break;
- case SENSOR_OV7660:
- case SENSOR_SOI768:
- reg17 = 0xa0;
- break;
- case SENSOR_PO1030:
- case SENSOR_PO2030N:
- reg17 = 0xa0;
+ case SENSOR_OM6802:
+/* case SENSOR_OV7648: * fixme: sometimes */
break;
default:
- reg17 = 0x60;
+ reg17 |= DEF_EN;
break;
}
reg_w1(gspca_dev, 0x17, reg17);
init = NULL;
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
- if (mode)
- reg1 = 0x46; /* 320x240: clk 48Mhz, video trf enable */
- else
- reg1 = 0x06; /* 640x480: clk 24Mhz, video trf enable */
- reg17 = 0x61; /* 0x:20: enable sensor clock */
+ reg01 |= SYS_SEL_48M | V_TX_EN;
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x02; /* clock / 2 */
switch (sd->sensor) {
case SENSOR_ADCM1700:
init = adcm1700_sensor_param1;
- reg1 = 0x46;
- reg17 = 0xe2;
break;
case SENSOR_GC0307:
init = gc0307_sensor_param1;
- reg17 = 0xa2;
- reg1 = 0x44;
+ break;
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ if (mode)
+ reg01 |= SYS_SEL_48M; /* 320x240: clk 48Mhz */
+ else
+ reg01 &= ~SYS_SEL_48M; /* 640x480: clk 24Mhz */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 1 */
break;
case SENSOR_MI0360B:
init = mi0360b_sensor_param1;
- reg1 &= ~0x02; /* don't inverse pin S_PWR_DN */
- reg17 = 0xe2;
break;
case SENSOR_MO4000:
- if (mode) {
-/* reg1 = 0x46; * 320 clk 48Mhz 60fp/s */
- reg1 = 0x06; /* clk 24Mz */
- } else {
- reg17 = 0x22; /* 640 MCKSIZE */
-/* reg1 = 0x06; * 640 clk 24Mz (done) */
+ if (mode) { /* if 320x240 */
+ reg01 &= ~SYS_SEL_48M; /* clk 24Mz */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 1 */
}
break;
case SENSOR_MT9V111:
init = mt9v111_sensor_param1;
- if (mode) {
- reg1 = 0x04; /* 320 clk 48Mhz */
- } else {
-/* reg1 = 0x06; * 640 clk 24Mz (done) */
- reg17 = 0xc2;
- }
break;
case SENSOR_OM6802:
init = om6802_sensor_param1;
- reg17 = 0x64; /* 640 MCKSIZE */
+ if (!mode) { /* if 640x480 */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 4 */
+ }
break;
case SENSOR_OV7630:
init = ov7630_sensor_param1;
- reg17 = 0xe2;
- reg1 = 0x44;
break;
case SENSOR_OV7648:
init = ov7648_sensor_param1;
- reg17 = 0x21;
-/* reg1 = 0x42; * 42 - 46? */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 1 */
break;
case SENSOR_OV7660:
init = ov7660_sensor_param1;
- if (sd->bridge == BRIDGE_SN9C120) {
- if (mode) { /* 320x240 - 160x120 */
- reg17 = 0xa2;
- reg1 = 0x44; /* 48 Mhz, video trf eneble */
- }
- } else {
- reg17 = 0x22;
- reg1 = 0x06; /* 24 Mhz, video trf eneble
- * inverse power down */
- }
break;
case SENSOR_PO1030:
init = po1030_sensor_param1;
- reg17 = 0xa2;
- reg1 = 0x44;
break;
case SENSOR_PO2030N:
init = po2030n_sensor_param1;
- reg1 = 0x46;
- reg17 = 0xa2;
break;
case SENSOR_SOI768:
init = soi768_sensor_param1;
- reg1 = 0x44;
- reg17 = 0xa2;
break;
case SENSOR_SP80708:
init = sp80708_sensor_param1;
- if (mode) {
-/*?? reg1 = 0x04; * 320 clk 48Mhz */
- } else {
- reg1 = 0x46; /* 640 clk 48Mz */
- reg17 = 0xa2;
- }
break;
}
setjpegqual(gspca_dev);
reg_w1(gspca_dev, 0x17, reg17);
- reg_w1(gspca_dev, 0x01, reg1);
+ reg_w1(gspca_dev, 0x01, reg01);
+ sd->reg01 = reg01;
+ sd->reg17 = reg17;
sethvflip(gspca_dev);
setbrightness(gspca_dev);
{ 0xa1, 0x21, 0x76, 0x20, 0x00, 0x00, 0x00, 0x10 };
static const u8 stopsoi768[] =
{ 0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10 };
- u8 data;
- const u8 *sn9c1xx;
+ u8 reg01;
+ u8 reg17;
- data = 0x0b;
+ reg01 = sd->reg01;
+ reg17 = sd->reg17 & ~SEN_CLK_EN;
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
case SENSOR_GC0307:
- data = 0x29;
+ case SENSOR_PO2030N:
+ case SENSOR_SP80708:
+ reg01 |= LED;
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 &= ~(LED | V_TX_EN);
+ reg_w1(gspca_dev, 0x01, reg01);
+/* reg_w1(gspca_dev, 0x02, 0x??); * LED off ? */
break;
case SENSOR_HV7131R:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
i2c_w8(gspca_dev, stophv7131);
- data = 0x2b;
break;
case SENSOR_MI0360:
case SENSOR_MI0360B:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
+/* reg_w1(gspca_dev, 0x02, 0x40); * LED off ? */
i2c_w8(gspca_dev, stopmi0360);
- data = 0x29;
break;
- case SENSOR_OV7648:
- i2c_w8(gspca_dev, stopov7648);
- /* fall thru */
case SENSOR_MT9V111:
- case SENSOR_OV7630:
+ case SENSOR_OM6802:
case SENSOR_PO1030:
- data = 0x29;
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
+ break;
+ case SENSOR_OV7630:
+ case SENSOR_OV7648:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
+ i2c_w8(gspca_dev, stopov7648);
+ break;
+ case SENSOR_OV7660:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
break;
case SENSOR_SOI768:
i2c_w8(gspca_dev, stopsoi768);
- data = 0x29;
break;
}
- sn9c1xx = sn_tb[sd->sensor];
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
- reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
- reg_w1(gspca_dev, 0x01, data);
+
+ reg01 |= SCL_SEL_OD;
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 |= S_PWR_DN; /* sensor power down */
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg_w1(gspca_dev, 0x17, reg17);
+ reg01 &= ~SYS_SEL_48M; /* clock 24MHz */
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 |= LED;
+ reg_w1(gspca_dev, 0x01, reg01);
/* Don't disable sensor clock as that disables the button on the cam */
/* reg_w1(gspca_dev, 0xf1, 0x01); */
}
/* -- module initialisation -- */
#define BS(bridge, sensor) \
.driver_info = (BRIDGE_ ## bridge << 16) \
- | SENSOR_ ## sensor
+ | (SENSOR_ ## sensor << 8)
+#define BSF(bridge, sensor, flags) \
+ .driver_info = (BRIDGE_ ## bridge << 16) \
+ | (SENSOR_ ## sensor << 8) \
+ | (flags)
static const __devinitdata struct usb_device_id device_table[] = {
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
#endif
- {USB_DEVICE(0x045e, 0x00f5), BS(SN9C105, OV7660)},
- {USB_DEVICE(0x045e, 0x00f7), BS(SN9C105, OV7660)},
+ {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)},
+ {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)},
{USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)},
{USB_DEVICE(0x0471, 0x0328), BS(SN9C105, MI0360)},
{USB_DEVICE(0x0471, 0x0330), BS(SN9C105, MI0360)},
ret = imx074_video_probe(icd, client);
if (ret < 0) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
return ret;
}
icd->ops = NULL;
if (icl->free_bus)
icl->free_bus(icl);
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(priv);
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
#include <linux/workqueue.h>
#include <media/ir-core.h>
return -1;
if (hw == IVTV_HW_TUNER) {
/* special tuner handling */
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->radio);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->radio);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->demod);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->demod);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->tv);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->tv);
if (sd)
sd->grp_id = 1 << idx;
return sd ? 0 : -1;
/* It's an I2C device other than an analog tuner or IR chip */
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type, 0, I2C_ADDRS(hw_addrs[idx]));
+ adap, type, 0, I2C_ADDRS(hw_addrs[idx]));
} else if (hw == IVTV_HW_CX25840) {
struct cx25840_platform_data pdata;
pdata.pvr150_workaround = itv->pvr150_workaround;
sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
- adap, NULL, type, 0, &pdata, hw_addrs[idx],
- NULL);
+ adap, type, 0, &pdata, hw_addrs[idx], NULL);
} else {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type, hw_addrs[idx], NULL);
+ adap, type, hw_addrs[idx], NULL);
}
if (sd)
sd->grp_id = 1 << idx;
.open = meye_open,
.release = meye_release,
.mmap = meye_mmap,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = meye_poll,
};
msleep(1);
mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK);
- if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
- video_nr) < 0) {
- v4l2_err(v4l2_dev, "video_register_device failed\n");
- goto outvideoreg;
- }
-
mutex_init(&meye.lock);
init_waitqueue_head(&meye.proc_list);
meye.brightness = 32 << 10;
sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
+ if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
+ video_nr) < 0) {
+ v4l2_err(v4l2_dev, "video_register_device failed\n");
+ goto outvideoreg;
+ }
+
v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n",
if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
- if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
- csicr1 |= CSICR1_INV_PCLK;
if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
}
mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "saa7111", I2C_SAA7111A, NULL);
+ "saa7111", I2C_SAA7111A, NULL);
mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6420", I2C_TEA6420_1, NULL);
+ "tea6420", I2C_TEA6420_1, NULL);
mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6420", I2C_TEA6420_2, NULL);
+ "tea6420", I2C_TEA6420_2, NULL);
mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6415c", I2C_TEA6415C, NULL);
+ "tea6415c", I2C_TEA6415C, NULL);
mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tda9840", I2C_TDA9840, NULL);
+ "tda9840", I2C_TDA9840, NULL);
mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tuner", I2C_TUNER, NULL);
+ "tuner", I2C_TUNER, NULL);
/* check if all devices are present */
if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
}
{
struct ov6650 *priv = to_ov6650(client);
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
}
static const struct v4l2_file_operations pms_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = pms_read,
};
" Setting up with specified i2c address 0x%x",
mid, i2caddr[0]);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
- NULL, fname,
- i2caddr[0], NULL);
+ fname, i2caddr[0], NULL);
} else {
pvr2_trace(PVR2_TRACE_INIT,
"Module ID %u:"
" Setting up with address probe list",
mid);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
- NULL, fname,
- 0, i2caddr);
+ fname, 0, i2caddr);
}
if (!sd) {
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#ifdef CONFIG_USB_PWC_INPUT_EVDEV
#include <linux/usb/input.h>
#endif
#include <linux/videodev2.h>
#include <linux/version.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
return ERR_PTR(-ENOMEM);
sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap,
- MODULE_NAME, isp_info->board_info, NULL);
+ isp_info->board_info, NULL);
if (!sd) {
v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n");
return NULL;
INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q);
fimc->vid_cap.active_buf_cnt = 0;
fimc->vid_cap.frame_count = 0;
+ fimc->vid_cap.buf_index = fimc_hw_get_frame_index(fimc);
set_bit(ST_CAPT_PEND, &fimc->state);
ret = videobuf_streamon(&fimc->vid_cap.vbq);
return ret;
}
+static int fimc_cap_cropcap(struct file *file, void *fh,
+ struct v4l2_cropcap *cr)
+{
+ struct fimc_frame *f;
+ struct fimc_ctx *ctx = fh;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
+ f = &ctx->s_frame;
+ cr->bounds.left = 0;
+ cr->bounds.top = 0;
+ cr->bounds.width = f->o_width;
+ cr->bounds.height = f->o_height;
+ cr->defrect = cr->bounds;
+
+ mutex_unlock(&fimc->lock);
+ return 0;
+}
+
+static int fimc_cap_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+ struct fimc_frame *f;
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
+ f = &ctx->s_frame;
+ cr->c.left = f->offs_h;
+ cr->c.top = f->offs_v;
+ cr->c.width = f->width;
+ cr->c.height = f->height;
+
+ mutex_unlock(&fimc->lock);
+ return 0;
+}
+
static int fimc_cap_s_crop(struct file *file, void *fh,
struct v4l2_crop *cr)
{
.vidioc_g_ctrl = fimc_vidioc_g_ctrl,
.vidioc_s_ctrl = fimc_cap_s_ctrl,
- .vidioc_g_crop = fimc_vidioc_g_crop,
+ .vidioc_g_crop = fimc_cap_g_crop,
.vidioc_s_crop = fimc_cap_s_crop,
- .vidioc_cropcap = fimc_vidioc_cropcap,
+ .vidioc_cropcap = fimc_cap_cropcap,
.vidioc_enum_input = fimc_cap_enum_input,
.vidioc_s_input = fimc_cap_s_input,
videobuf_queue_dma_contig_init(&vid_cap->vbq, &fimc_qops,
vid_cap->v4l2_dev.dev, &fimc->irqlock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct fimc_vid_buffer), (void *)ctx);
+ sizeof(struct fimc_vid_buffer), (void *)ctx, NULL);
ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
if (ret) {
.planes_cnt = 1,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "XRGB-8-8-8-8, 24 bpp",
- .fourcc = V4L2_PIX_FMT_RGB24,
+ .name = "XRGB-8-8-8-8, 32 bpp",
+ .fourcc = V4L2_PIX_FMT_RGB32,
.depth = 32,
.color = S5P_FIMC_RGB888,
.buff_cnt = 1,
{
struct fimc_ctx *ctx = priv;
struct v4l2_queryctrl *c;
+ int ret = -EINVAL;
c = get_ctrl(qc->id);
if (c) {
return 0;
}
- if (ctx->state & FIMC_CTX_CAP)
- return v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd,
+ if (ctx->state & FIMC_CTX_CAP) {
+ if (mutex_lock_interruptible(&ctx->fimc_dev->lock))
+ return -ERESTARTSYS;
+ ret = v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd,
core, queryctrl, qc);
- return -EINVAL;
+ mutex_unlock(&ctx->fimc_dev->lock);
+ }
+ return ret;
}
int fimc_vidioc_g_ctrl(struct file *file, void *priv,
return 0;
}
-int fimc_vidioc_cropcap(struct file *file, void *fh,
+static int fimc_m2m_cropcap(struct file *file, void *fh,
struct v4l2_cropcap *cr)
{
struct fimc_frame *frame;
return 0;
}
-int fimc_vidioc_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
{
struct fimc_frame *frame;
struct fimc_ctx *ctx = file->private_data;
struct fimc_frame *f;
u32 min_size, halign;
- f = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
- &ctx->s_frame : &ctx->d_frame;
-
if (cr->c.top < 0 || cr->c.left < 0) {
v4l2_err(&fimc->m2m.v4l2_dev,
"doesn't support negative values for top & left\n");
return -EINVAL;
}
- f = ctx_get_frame(ctx, cr->type);
- if (IS_ERR(f))
- return PTR_ERR(f);
+ if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ f = (ctx->state & FIMC_CTX_CAP) ? &ctx->s_frame : &ctx->d_frame;
+ else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+ ctx->state & FIMC_CTX_M2M)
+ f = &ctx->s_frame;
+ else
+ return -EINVAL;
- min_size = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
- ? fimc->variant->min_inp_pixsize
- : fimc->variant->min_out_pixsize;
+ min_size = (f == &ctx->s_frame) ?
+ fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
if (ctx->state & FIMC_CTX_M2M) {
if (fimc->id == 1 && fimc->variant->pix_hoff)
f = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
&ctx->s_frame : &ctx->d_frame;
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
spin_lock_irqsave(&ctx->slock, flags);
if (~ctx->state & (FIMC_SRC_FMT | FIMC_DST_FMT)) {
/* Check to see if scaling ratio is within supported range */
else
ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
if (ret) {
- spin_unlock_irqrestore(&ctx->slock, flags);
v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range");
- return -EINVAL;
+ ret = -EINVAL;
+ goto scr_unlock;
}
}
ctx->state |= FIMC_PARAMS;
f->width = cr->c.width;
f->height = cr->c.height;
+scr_unlock:
spin_unlock_irqrestore(&ctx->slock, flags);
+ mutex_unlock(&fimc->lock);
return 0;
}
.vidioc_g_ctrl = fimc_vidioc_g_ctrl,
.vidioc_s_ctrl = fimc_m2m_s_ctrl,
- .vidioc_g_crop = fimc_vidioc_g_crop,
+ .vidioc_g_crop = fimc_m2m_g_crop,
.vidioc_s_crop = fimc_m2m_s_crop,
- .vidioc_cropcap = fimc_vidioc_cropcap
+ .vidioc_cropcap = fimc_m2m_cropcap
};
.open = fimc_m2m_open,
.release = fimc_m2m_release,
.poll = fimc_m2m_poll,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.mmap = fimc_m2m_mmap,
};
.pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
+ .has_cistatus2 = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 1,
static struct samsung_fimc_variant fimc2_variant_s5pv310 = {
.pix_hoff = 1,
+ .has_cistatus2 = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 1,
/*#define DEBUG*/
+#include <linux/sched.h>
#include <linux/types.h>
+#include <linux/videodev2.h>
#include <media/videobuf-core.h>
#include <media/v4l2-device.h>
#include <media/v4l2-mem2mem.h>
#include <media/v4l2-mediabus.h>
#include <media/s3c_fimc.h>
-#include <linux/videodev2.h>
+
#include "regs-fimc.h"
#define err(fmt, args...) \
* @pix_hoff: indicate whether horizontal offset is in pixels or in bytes
* @has_inp_rot: set if has input rotator
* @has_out_rot: set if has output rotator
+ * @has_cistatus2: 1 if CISTATUS2 register is present in this IP revision
* @pix_limit: pixel size constraints for the scaler
* @min_inp_pixsize: minimum input pixel size
* @min_out_pixsize: minimum output pixel size
unsigned int pix_hoff:1;
unsigned int has_inp_rot:1;
unsigned int has_out_rot:1;
+ unsigned int has_cistatus2:1;
struct fimc_pix_limit *pix_limit;
u16 min_inp_pixsize;
u16 min_out_pixsize;
return frame;
}
+/* Return an index to the buffer actually being written. */
static inline u32 fimc_hw_get_frame_index(struct fimc_dev *dev)
{
- u32 reg = readl(dev->regs + S5P_CISTATUS);
- return (reg & S5P_CISTATUS_FRAMECNT_MASK) >>
- S5P_CISTATUS_FRAMECNT_SHIFT;
+ u32 reg;
+
+ if (dev->variant->has_cistatus2) {
+ reg = readl(dev->regs + S5P_CISTATUS2) & 0x3F;
+ return reg > 0 ? --reg : reg;
+ } else {
+ reg = readl(dev->regs + S5P_CISTATUS);
+ return (reg & S5P_CISTATUS_FRAMECNT_MASK) >>
+ S5P_CISTATUS_FRAMECNT_SHIFT;
+ }
}
/* -----------------------------------------------------*/
struct v4l2_format *f);
int fimc_vidioc_try_fmt(struct file *file, void *priv,
struct v4l2_format *f);
-int fimc_vidioc_g_crop(struct file *file, void *fh,
- struct v4l2_crop *cr);
-int fimc_vidioc_cropcap(struct file *file, void *fh,
- struct v4l2_cropcap *cr);
int fimc_vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc);
int fimc_vidioc_g_ctrl(struct file *file, void *priv,
#define S5P_CISTATUS_VVALID_A (1 << 15)
#define S5P_CISTATUS_VVALID_B (1 << 14)
+/* Indexes to the last and the currently processed buffer. */
+#define S5P_CISTATUS2 0x68
+
/* Image capture control */
#define S5P_CIIMGCPT 0xc0
#define S5P_CIIMGCPT_IMGCPTEN (1 << 31)
so we do not need to probe for a radio tuner device. */
if (dev->radio_type != UNSET)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
dev->radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == ADDR_UNSET) {
enum v4l2_i2c_tuner_type type =
has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(type));
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
dev->tuner_addr, NULL);
}
}
if (card_is_empress(dev)) {
struct v4l2_subdev *sd =
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "saa6752hs",
+ "saa6752hs",
saa7134_boards[dev->board].empress_addr, NULL);
if (sd)
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "saa6588",
+ &dev->i2c_adap, "saa6588",
0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
if (sd) {
printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/delay.h>
#include "saa7134-reg.h"
#include <media/tveeprom.h>
#include <media/videobuf-dma-sg.h>
#include <media/videobuf-dvb.h>
-#include <linux/smp_lock.h>
#include <dvb_demux.h>
#include <dvb_frontend.h>
#include <dvb_net.h>
* we complete the completion.
*/
- if (!csi2->driver || !csi2->driver->owner) {
+ if (!csi2->driver) {
complete(&wait.completion);
/* Either too late, or probing failed */
bus_unregister_notifier(&platform_bus_type, &wait.notifier);
int pix_idx;
struct videobuf_buffer *active;
enum sh_vou_status status;
+ struct mutex fop_lock;
};
struct sh_vou_file {
vb->state = VIDEOBUF_NEEDS_INIT;
}
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
unsigned int *size)
{
return 0;
}
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
static int sh_vou_buf_prepare(struct videobuf_queue *vq,
struct videobuf_buffer *vb,
enum v4l2_field field)
return 0;
}
-/* Locking: caller holds vq->vb_lock mutex and vq->irqlock spinlock */
+/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
static void sh_vou_buf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
V4L2_BUF_TYPE_VIDEO_OUTPUT,
V4L2_FIELD_NONE,
sizeof(struct videobuf_buffer), vdev,
- NULL);
+ &vou_dev->fop_lock);
return 0;
}
.owner = THIS_MODULE,
.open = sh_vou_open,
.release = sh_vou_release,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.mmap = sh_vou_mmap,
.poll = sh_vou_poll,
};
INIT_LIST_HEAD(&vou_dev->queue);
spin_lock_init(&vou_dev->lock);
+ mutex_init(&vou_dev->fop_lock);
atomic_set(&vou_dev->use_count, 0);
vou_dev->pdata = vou_pdata;
vou_dev->status = SH_VOU_IDLE;
vdev->tvnorms |= V4L2_STD_PAL;
vdev->v4l2_dev = &vou_dev->v4l2_dev;
vdev->release = video_device_release;
+ vdev->lock = &vou_dev->fop_lock;
vou_dev->vdev = vdev;
video_set_drvdata(vdev, vou_dev);
goto ereset;
subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
- NULL, vou_pdata->board_info, NULL);
+ vou_pdata->board_info, NULL);
if (!subdev) {
ret = -ENOMEM;
goto ei2cnd;
.owner = THIS_MODULE,
.open = sn9c102_open,
.release = sn9c102_release,
- .ioctl = sn9c102_ioctl,
+ .unlocked_ioctl = sn9c102_ioctl,
.read = sn9c102_read,
.poll = sn9c102_poll,
.mmap = sn9c102_mmap,
ret = soc_camera_set_fmt(icd, &f);
if (ret < 0)
goto esfmt;
+
+ ici->ops->init_videobuf(&icd->vb_vidq, icd);
}
file->private_data = icd;
dev_dbg(&icd->dev, "camera device open\n");
- ici->ops->init_videobuf(&icd->vb_vidq, icd);
-
mutex_unlock(&icd->video_lock);
return 0;
icl->board_info->platform_data = icd;
subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
- NULL, icl->board_info, NULL);
+ icl->board_info, NULL);
if (!subdev)
goto ei2cnd;
hit-and-miss. */
mdelay(10);
v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"saa7115_auto", 0, saa711x_addrs);
break;
}
struct tuner_setup tun_setup;
sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
/* depending on whether we found a demod or not, select
the tuner type. */
type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(type));
if (sd == NULL)
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
}
}
-struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
+static struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
__u32 v4l2_id, struct uvc_control_mapping **mapping)
{
struct uvc_control *ctrl = NULL;
return ret;
}
+/*
+ * Mapping V4L2 controls to UVC controls can be straighforward if done well.
+ * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
+ * must be grouped (for instance the Red Balance, Blue Balance and Do White
+ * Balance V4L2 controls use the White Balance Component UVC control) or
+ * otherwise translated. The approach we take here is to use a translation
+ * table for the controls that can be mapped directly, and handle the others
+ * manually.
+ */
+int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+ struct v4l2_querymenu *query_menu)
+{
+ struct uvc_menu_info *menu_info;
+ struct uvc_control_mapping *mapping;
+ struct uvc_control *ctrl;
+ u32 index = query_menu->index;
+ u32 id = query_menu->id;
+ int ret;
+
+ memset(query_menu, 0, sizeof(*query_menu));
+ query_menu->id = id;
+ query_menu->index = index;
+
+ ret = mutex_lock_interruptible(&chain->ctrl_mutex);
+ if (ret < 0)
+ return -ERESTARTSYS;
+
+ ctrl = uvc_find_control(chain, query_menu->id, &mapping);
+ if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (query_menu->index >= mapping->menu_count) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ menu_info = &mapping->menu_info[query_menu->index];
+ strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
+
+done:
+ mutex_unlock(&chain->ctrl_mutex);
+ return ret;
+}
+
/* --------------------------------------------------------------------------
* Control transactions
queue->type = type;
}
+/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int __uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ unsigned int i;
+
+ for (i = 0; i < queue->count; ++i) {
+ if (queue->buffer[i].vma_use_count != 0)
+ return -EBUSY;
+ }
+
+ if (queue->count) {
+ vfree(queue->mem);
+ queue->count = 0;
+ }
+
+ return 0;
+}
+
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ int ret;
+
+ mutex_lock(&queue->mutex);
+ ret = __uvc_free_buffers(queue);
+ mutex_unlock(&queue->mutex);
+
+ return ret;
+}
+
/*
* Allocate the video buffers.
*
mutex_lock(&queue->mutex);
- if ((ret = uvc_free_buffers(queue)) < 0)
+ if ((ret = __uvc_free_buffers(queue)) < 0)
goto done;
/* Bail out if no buffers should be allocated. */
return ret;
}
-/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
- unsigned int i;
-
- for (i = 0; i < queue->count; ++i) {
- if (queue->buffer[i].vma_use_count != 0)
- return -EBUSY;
- }
-
- if (queue->count) {
- vfree(queue->mem);
- queue->count = 0;
- }
-
- return 0;
-}
-
/*
* Check if buffers have been allocated.
*/
return ret;
}
+/*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count--;
+}
+
+static const struct vm_operations_struct uvc_vm_ops = {
+ .open = uvc_vm_open,
+ .close = uvc_vm_close,
+};
+
+/*
+ * Memory-map a video buffer.
+ *
+ * This function implements video buffers memory mapping and is intended to be
+ * used by the device mmap handler.
+ */
+int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+{
+ struct uvc_buffer *uninitialized_var(buffer);
+ struct page *page;
+ unsigned long addr, start, size;
+ unsigned int i;
+ int ret = 0;
+
+ start = vma->vm_start;
+ size = vma->vm_end - vma->vm_start;
+
+ mutex_lock(&queue->mutex);
+
+ for (i = 0; i < queue->count; ++i) {
+ buffer = &queue->buffer[i];
+ if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+
+ if (i == queue->count || size != queue->buf_size) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * VM_IO marks the area as being an mmaped region for I/O to a
+ * device. It also prevents the region from being core dumped.
+ */
+ vma->vm_flags |= VM_IO;
+
+ addr = (unsigned long)queue->mem + buffer->buf.m.offset;
+ while (size > 0) {
+ page = vmalloc_to_page((void *)addr);
+ if ((ret = vm_insert_page(vma, start, page)) < 0)
+ goto done;
+
+ start += PAGE_SIZE;
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &uvc_vm_ops;
+ vma->vm_private_data = buffer;
+ uvc_vm_open(vma);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
/*
* Poll the video queue.
*
* V4L2 interface
*/
-/*
- * Mapping V4L2 controls to UVC controls can be straighforward if done well.
- * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
- * must be grouped (for instance the Red Balance, Blue Balance and Do White
- * Balance V4L2 controls use the White Balance Component UVC control) or
- * otherwise translated. The approach we take here is to use a translation
- * table for the controls that can be mapped directly, and handle the others
- * manually.
- */
-static int uvc_v4l2_query_menu(struct uvc_video_chain *chain,
- struct v4l2_querymenu *query_menu)
-{
- struct uvc_menu_info *menu_info;
- struct uvc_control_mapping *mapping;
- struct uvc_control *ctrl;
- u32 index = query_menu->index;
- u32 id = query_menu->id;
-
- ctrl = uvc_find_control(chain, query_menu->id, &mapping);
- if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
- return -EINVAL;
-
- if (query_menu->index >= mapping->menu_count)
- return -EINVAL;
-
- memset(query_menu, 0, sizeof(*query_menu));
- query_menu->id = id;
- query_menu->index = index;
-
- menu_info = &mapping->menu_info[query_menu->index];
- strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
- return 0;
-}
-
/*
* Find the frame interval closest to the requested frame interval for the
* given frame format and size. This should be done by the device as part of
* developers test their webcams with the Linux driver as well as with
* the Windows driver).
*/
+ mutex_lock(&stream->mutex);
if (stream->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS)
probe->dwMaxVideoFrameSize =
stream->ctrl.dwMaxVideoFrameSize;
/* Probe the device. */
ret = uvc_probe_video(stream, probe);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
goto done;
static int uvc_v4l2_get_format(struct uvc_streaming *stream,
struct v4l2_format *fmt)
{
- struct uvc_format *format = stream->cur_format;
- struct uvc_frame *frame = stream->cur_frame;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ int ret = 0;
if (fmt->type != stream->type)
return -EINVAL;
- if (format == NULL || frame == NULL)
- return -EINVAL;
+ mutex_lock(&stream->mutex);
+ format = stream->cur_format;
+ frame = stream->cur_frame;
+
+ if (format == NULL || frame == NULL) {
+ ret = -EINVAL;
+ goto done;
+ }
fmt->fmt.pix.pixelformat = format->fcc;
fmt->fmt.pix.width = frame->wWidth;
fmt->fmt.pix.colorspace = format->colorspace;
fmt->fmt.pix.priv = 0;
- return 0;
+done:
+ mutex_unlock(&stream->mutex);
+ return ret;
}
static int uvc_v4l2_set_format(struct uvc_streaming *stream,
if (fmt->type != stream->type)
return -EINVAL;
- if (uvc_queue_allocated(&stream->queue))
- return -EBUSY;
-
ret = uvc_v4l2_try_format(stream, fmt, &probe, &format, &frame);
if (ret < 0)
return ret;
+ mutex_lock(&stream->mutex);
+
+ if (uvc_queue_allocated(&stream->queue)) {
+ ret = -EBUSY;
+ goto done;
+ }
+
memcpy(&stream->ctrl, &probe, sizeof probe);
stream->cur_format = format;
stream->cur_frame = frame;
- return 0;
+done:
+ mutex_unlock(&stream->mutex);
+ return ret;
}
static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
if (parm->type != stream->type)
return -EINVAL;
+ mutex_lock(&stream->mutex);
numerator = stream->ctrl.dwFrameInterval;
+ mutex_unlock(&stream->mutex);
+
denominator = 10000000;
uvc_simplify_fraction(&numerator, &denominator, 8, 333);
static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
struct v4l2_streamparm *parm)
{
- struct uvc_frame *frame = stream->cur_frame;
struct uvc_streaming_control probe;
struct v4l2_fract timeperframe;
uint32_t interval;
if (parm->type != stream->type)
return -EINVAL;
- if (uvc_queue_streaming(&stream->queue))
- return -EBUSY;
-
if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
timeperframe = parm->parm.capture.timeperframe;
else
timeperframe = parm->parm.output.timeperframe;
- memcpy(&probe, &stream->ctrl, sizeof probe);
interval = uvc_fraction_to_interval(timeperframe.numerator,
timeperframe.denominator);
-
uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n",
timeperframe.numerator, timeperframe.denominator, interval);
- probe.dwFrameInterval = uvc_try_frame_interval(frame, interval);
+
+ mutex_lock(&stream->mutex);
+
+ if (uvc_queue_streaming(&stream->queue)) {
+ mutex_unlock(&stream->mutex);
+ return -EBUSY;
+ }
+
+ memcpy(&probe, &stream->ctrl, sizeof probe);
+ probe.dwFrameInterval =
+ uvc_try_frame_interval(stream->cur_frame, interval);
/* Probe the device with the new settings. */
ret = uvc_probe_video(stream, &probe);
- if (ret < 0)
+ if (ret < 0) {
+ mutex_unlock(&stream->mutex);
return ret;
+ }
memcpy(&stream->ctrl, &probe, sizeof probe);
+ mutex_unlock(&stream->mutex);
/* Return the actual frame period. */
timeperframe.numerator = probe.dwFrameInterval;
if (uvc_has_privileges(handle)) {
uvc_video_enable(stream, 0);
- mutex_lock(&stream->queue.mutex);
if (uvc_free_buffers(&stream->queue) < 0)
uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to "
"free buffers.\n");
- mutex_unlock(&stream->queue.mutex);
}
/* Release the file handle. */
}
case VIDIOC_QUERYMENU:
- return uvc_v4l2_query_menu(chain, arg);
+ return uvc_query_v4l2_menu(chain, arg);
case VIDIOC_G_EXT_CTRLS:
{
case VIDIOC_CROPCAP:
{
struct v4l2_cropcap *ccap = arg;
- struct uvc_frame *frame = stream->cur_frame;
if (ccap->type != stream->type)
return -EINVAL;
ccap->bounds.left = 0;
ccap->bounds.top = 0;
- ccap->bounds.width = frame->wWidth;
- ccap->bounds.height = frame->wHeight;
+
+ mutex_lock(&stream->mutex);
+ ccap->bounds.width = stream->cur_frame->wWidth;
+ ccap->bounds.height = stream->cur_frame->wHeight;
+ mutex_unlock(&stream->mutex);
ccap->defrect = ccap->bounds;
case VIDIOC_REQBUFS:
{
struct v4l2_requestbuffers *rb = arg;
- unsigned int bufsize =
- stream->ctrl.dwMaxVideoFrameSize;
if (rb->type != stream->type ||
rb->memory != V4L2_MEMORY_MMAP)
if ((ret = uvc_acquire_privileges(handle)) < 0)
return ret;
- ret = uvc_alloc_buffers(&stream->queue, rb->count, bufsize);
+ mutex_lock(&stream->mutex);
+ ret = uvc_alloc_buffers(&stream->queue, rb->count,
+ stream->ctrl.dwMaxVideoFrameSize);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
return ret;
if (!uvc_has_privileges(handle))
return -EBUSY;
+ mutex_lock(&stream->mutex);
ret = uvc_video_enable(stream, 1);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
return ret;
break;
return -EINVAL;
}
-/*
- * VMA operations.
- */
-static void uvc_vm_open(struct vm_area_struct *vma)
-{
- struct uvc_buffer *buffer = vma->vm_private_data;
- buffer->vma_use_count++;
-}
-
-static void uvc_vm_close(struct vm_area_struct *vma)
-{
- struct uvc_buffer *buffer = vma->vm_private_data;
- buffer->vma_use_count--;
-}
-
-static const struct vm_operations_struct uvc_vm_ops = {
- .open = uvc_vm_open,
- .close = uvc_vm_close,
-};
-
static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
{
struct uvc_fh *handle = file->private_data;
struct uvc_streaming *stream = handle->stream;
- struct uvc_video_queue *queue = &stream->queue;
- struct uvc_buffer *uninitialized_var(buffer);
- struct page *page;
- unsigned long addr, start, size;
- unsigned int i;
- int ret = 0;
uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n");
- start = vma->vm_start;
- size = vma->vm_end - vma->vm_start;
-
- mutex_lock(&queue->mutex);
-
- for (i = 0; i < queue->count; ++i) {
- buffer = &queue->buffer[i];
- if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
- break;
- }
-
- if (i == queue->count || size != queue->buf_size) {
- ret = -EINVAL;
- goto done;
- }
-
- /*
- * VM_IO marks the area as being an mmaped region for I/O to a
- * device. It also prevents the region from being core dumped.
- */
- vma->vm_flags |= VM_IO;
-
- addr = (unsigned long)queue->mem + buffer->buf.m.offset;
- while (size > 0) {
- page = vmalloc_to_page((void *)addr);
- if ((ret = vm_insert_page(vma, start, page)) < 0)
- goto done;
-
- start += PAGE_SIZE;
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vma->vm_ops = &uvc_vm_ops;
- vma->vm_private_data = buffer;
- uvc_vm_open(vma);
-
-done:
- mutex_unlock(&queue->mutex);
- return ret;
+ return uvc_queue_mmap(&stream->queue, vma);
}
static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
.owner = THIS_MODULE,
.open = uvc_v4l2_open,
.release = uvc_v4l2_release,
- .ioctl = uvc_v4l2_ioctl,
+ .unlocked_ioctl = uvc_v4l2_ioctl,
.read = uvc_v4l2_read,
.mmap = uvc_v4l2_mmap,
.poll = uvc_v4l2_poll,
unsigned int i;
int ret;
- mutex_lock(&stream->mutex);
-
/* Perform probing. The device should adjust the requested values
* according to its capabilities. However, some devices, namely the
* first generation UVC Logitech webcams, don't implement the Video
}
done:
- mutex_unlock(&stream->mutex);
return ret;
}
struct uvc_streaming_control ctrl;
struct uvc_format *cur_format;
struct uvc_frame *cur_frame;
-
+ /* Protect access to ctrl, cur_format, cur_frame and hardware video
+ * probe control.
+ */
struct mutex mutex;
unsigned int frozen : 1;
extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
struct uvc_buffer *buf);
+extern int uvc_queue_mmap(struct uvc_video_queue *queue,
+ struct vm_area_struct *vma);
extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
struct file *file, poll_table *wait);
extern int uvc_queue_allocated(struct uvc_video_queue *queue);
extern int uvc_status_resume(struct uvc_device *dev);
/* Controls */
-extern struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
- __u32 v4l2_id, struct uvc_control_mapping **mapping);
extern int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
struct v4l2_queryctrl *v4l2_ctrl);
+extern int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+ struct v4l2_querymenu *query_menu);
extern int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
const struct uvc_control_mapping *mapping);
/* Load an i2c sub-device. */
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter, const char *module_name,
- struct i2c_board_info *info, const unsigned short *probe_addrs)
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs)
{
struct v4l2_subdev *sd = NULL;
struct i2c_client *client;
BUG_ON(!v4l2_dev);
- if (module_name)
- request_module(module_name);
- else
- request_module(I2C_MODULE_PREFIX "%s", info->type);
+ request_module(I2C_MODULE_PREFIX "%s", info->type);
/* Create the i2c client */
if (info->addr == 0 && probe_addrs)
EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
int irq, void *platform_data,
u8 addr, const unsigned short *probe_addrs)
{
info.irq = irq;
info.platform_data = platform_data;
- return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
- &info, probe_addrs);
+ return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs);
}
EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
#include <linux/videodev.h>
#include <linux/videodev2.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <media/v4l2-ioctl.h>
#ifdef CONFIG_COMPAT
size_t sz, loff_t *off)
{
struct video_device *vdev = video_devdata(filp);
- int ret = -EIO;
+ int ret = -ENODEV;
if (!vdev->fops->read)
return -EINVAL;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->read(filp, buf, sz, off);
if (vdev->lock)
size_t sz, loff_t *off)
{
struct video_device *vdev = video_devdata(filp);
- int ret = -EIO;
+ int ret = -ENODEV;
if (!vdev->fops->write)
return -EINVAL;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->write(filp, buf, sz, off);
if (vdev->lock)
static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll)
{
struct video_device *vdev = video_devdata(filp);
- int ret = DEFAULT_POLLMASK;
+ int ret = POLLERR | POLLHUP;
if (!vdev->fops->poll)
- return ret;
+ return DEFAULT_POLLMASK;
if (vdev->lock)
mutex_lock(vdev->lock);
if (video_is_registered(vdev))
int ret = -ENODEV;
if (vdev->fops->unlocked_ioctl) {
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
if (vdev->lock)
mutex_unlock(vdev->lock);
} else if (vdev->fops->ioctl) {
- /* TODO: convert all drivers to unlocked_ioctl */
+ /* This code path is a replacement for the BKL. It is a major
+ * hack but it will have to do for those drivers that are not
+ * yet converted to use unlocked_ioctl.
+ *
+ * There are two options: if the driver implements struct
+ * v4l2_device, then the lock defined there is used to
+ * serialize the ioctls. Otherwise the v4l2 core lock defined
+ * below is used. This lock is really bad since it serializes
+ * completely independent devices.
+ *
+ * Both variants suffer from the same problem: if the driver
+ * sleeps, then it blocks all ioctls since the lock is still
+ * held. This is very common for VIDIOC_DQBUF since that
+ * normally waits for a frame to arrive. As a result any other
+ * ioctl calls will proceed very, very slowly since each call
+ * will have to wait for the VIDIOC_QBUF to finish. Things that
+ * should take 0.01s may now take 10-20 seconds.
+ *
+ * The workaround is to *not* take the lock for VIDIOC_DQBUF.
+ * This actually works OK for videobuf-based drivers, since
+ * videobuf will take its own internal lock.
+ */
static DEFINE_MUTEX(v4l2_ioctl_mutex);
+ struct mutex *m = vdev->v4l2_dev ?
+ &vdev->v4l2_dev->ioctl_lock : &v4l2_ioctl_mutex;
- mutex_lock(&v4l2_ioctl_mutex);
+ if (cmd != VIDIOC_DQBUF && mutex_lock_interruptible(m))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->ioctl(filp, cmd, arg);
- mutex_unlock(&v4l2_ioctl_mutex);
+ if (cmd != VIDIOC_DQBUF)
+ mutex_unlock(m);
} else
ret = -ENOTTY;
if (!vdev->fops->mmap)
return ret;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->mmap(filp, vm);
if (vdev->lock)
mutex_lock(&videodev_lock);
vdev = video_devdata(filp);
/* return ENODEV if the video device has already been removed. */
- if (vdev == NULL) {
+ if (vdev == NULL || !video_is_registered(vdev)) {
mutex_unlock(&videodev_lock);
return -ENODEV;
}
video_get(vdev);
mutex_unlock(&videodev_lock);
if (vdev->fops->open) {
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
+ ret = -ERESTARTSYS;
+ goto err;
+ }
if (video_is_registered(vdev))
ret = vdev->fops->open(filp);
else
mutex_unlock(vdev->lock);
}
+err:
/* decrease the refcount in case of an error */
if (ret)
video_put(vdev);
if (!vdev || !video_is_registered(vdev))
return;
+ mutex_lock(&videodev_lock);
+ /* This must be in a critical section to prevent a race with v4l2_open.
+ * Once this bit has been cleared video_get may never be called again.
+ */
clear_bit(V4L2_FL_REGISTERED, &vdev->flags);
+ mutex_unlock(&videodev_lock);
device_unregister(&vdev->dev);
}
EXPORT_SYMBOL(video_unregister_device);
INIT_LIST_HEAD(&v4l2_dev->subdevs);
spin_lock_init(&v4l2_dev->lock);
+ mutex_init(&v4l2_dev->ioctl_lock);
v4l2_dev->dev = dev;
if (dev == NULL) {
/* If dev == NULL, then name must be filled in by the caller */
*/
sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31);
cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter,
- "ov7670", "ov7670", 0x42 >> 1, NULL);
+ "ov7670", 0x42 >> 1, NULL);
if (cam->sensor == NULL) {
dev_err(&pdev->dev, "Unable to find the sensor!\n");
ret = -ENODEV;
vino_drvdata->decoder =
v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
- NULL, "saa7191", 0, I2C_ADDRS(0x45));
+ "saa7191", 0, I2C_ADDRS(0x45));
vino_drvdata->camera =
v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
- NULL, "indycam", 0, I2C_ADDRS(0x2b));
+ "indycam", 0, I2C_ADDRS(0x2b));
dprintk("init complete!\n");
static const struct v4l2_file_operations w9966_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = w9966_v4l_read,
};
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ctrls.h>
-#include <media/wm8775.h>
MODULE_DESCRIPTION("wm8775 driver");
MODULE_AUTHOR("Ulf Eklund, Hans Verkuil");
TOT_REGS
};
-#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */
-#define ALC_EN 0x100 /* R17: ALC enable */
-
struct wm8775_state {
struct v4l2_subdev sd;
struct v4l2_ctrl_handler hdl;
struct v4l2_ctrl *mute;
- struct v4l2_ctrl *vol;
- struct v4l2_ctrl *bal;
- struct v4l2_ctrl *loud;
u8 input; /* Last selected input (0-0xf) */
};
return -1;
}
-static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly)
-{
- struct wm8775_state *state = to_state(sd);
- u8 vol_l, vol_r;
- int muted = 0 != state->mute->val;
- u16 volume = (u16)state->vol->val;
- u16 balance = (u16)state->bal->val;
-
- /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */
- vol_l = (min(65536 - balance, 32768) * volume) >> 23;
- vol_r = (min(balance, (u16)32768) * volume) >> 23;
-
- /* Mute */
- if (muted || quietly)
- wm8775_write(sd, R21, 0x0c0 | state->input);
-
- wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */
- wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */
-
- /* Un-mute */
- if (!muted)
- wm8775_write(sd, R21, state->input);
-}
-
static int wm8775_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
state->input = input;
if (!v4l2_ctrl_g_ctrl(state->mute))
return 0;
- if (!v4l2_ctrl_g_ctrl(state->vol))
- return 0;
- if (!v4l2_ctrl_g_ctrl(state->bal))
- return 0;
- wm8775_set_audio(sd, 1);
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct wm8775_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BALANCE:
- wm8775_set_audio(sd, 0);
- return 0;
- case V4L2_CID_AUDIO_LOUDNESS:
- wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD);
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ if (!ctrl->val)
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
return -EINVAL;
static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
{
- wm8775_set_audio(sd, 0);
+ struct wm8775_state *state = to_state(sd);
+
+ /* If I remove this, then it can happen that I have no
+ sound the first time I tune from static to a valid channel.
+ It's difficult to reproduce and is almost certainly related
+ to the zero cross detect circuit. */
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
{
struct wm8775_state *state;
struct v4l2_subdev *sd;
- int err;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
- sd->grp_id = WM8775_GID; /* subdev group id */
state->input = 2;
- v4l2_ctrl_handler_init(&state->hdl, 4);
+ v4l2_ctrl_handler_init(&state->hdl, 1);
state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
- state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/
- state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768);
- state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1);
sd->ctrl_handler = &state->hdl;
- err = state->hdl.error;
- if (err) {
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
return err;
wm8775_write(sd, R23, 0x000);
/* Disable zero cross detect timeout */
wm8775_write(sd, R7, 0x000);
- /* HPF enable, I2S mode, 24-bit */
- wm8775_write(sd, R11, 0x022);
+ /* Left justified, 24-bit mode */
+ wm8775_write(sd, R11, 0x021);
/* Master mode, clock ratio 256fs */
wm8775_write(sd, R12, 0x102);
/* Powered up */
wm8775_write(sd, R13, 0x000);
- /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */
- wm8775_write(sd, R16, 0x1bb);
- /* Set ALC mode and hold time */
- wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD);
+ /* ADC gain +2.5dB, enable zero cross */
+ wm8775_write(sd, R14, 0x1d4);
+ /* ADC gain +2.5dB, enable zero cross */
+ wm8775_write(sd, R15, 0x1d4);
+ /* ALC Stereo, ALC target level -1dB FS max gain +8dB */
+ wm8775_write(sd, R16, 0x1bf);
+ /* Enable gain control, use zero cross detection,
+ ALC hold time 42.6 ms */
+ wm8775_write(sd, R17, 0x185);
/* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */
wm8775_write(sd, R18, 0x0a2);
/* Enable noise gate, threshold -72dBfs */
wm8775_write(sd, R19, 0x005);
- /* Transient window 4ms, ALC min gain -5dB */
- wm8775_write(sd, R20, 0x0fb);
-
- wm8775_set_audio(sd, 1); /* set volume/mute/mux */
-
+ /* Transient window 4ms, lower PGA gain limit -1dB */
+ wm8775_write(sd, R20, 0x07a);
+ /* LRBOTH = 1, use input 2. */
+ wm8775_write(sd, R21, 0x102);
return 0;
}
}
zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter, NULL, zr->card.i2c_decoder,
+ &zr->i2c_adapter, zr->card.i2c_decoder,
0, zr->card.addrs_decoder);
if (zr->card.i2c_encoder)
zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter,
- NULL, zr->card.i2c_encoder,
+ &zr->i2c_adapter, zr->card.i2c_encoder,
0, zr->card.addrs_encoder);
dprintk(2,
static int mptfc_target_alloc(struct scsi_target *starget);
static int mptfc_slave_alloc(struct scsi_device *sdev);
-static int mptfc_qcmd(struct scsi_cmnd *SCpnt,
- void (*done)(struct scsi_cmnd *));
+static int mptfc_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt);
static void mptfc_target_destroy(struct scsi_target *starget);
static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
static void __devexit mptfc_remove(struct pci_dev *pdev);
}
static int
-mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptfc_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
struct mptfc_rport_info *ri;
struct fc_rport *rport = starget_to_rport(scsi_target(SCpnt->device));
return mptscsih_qcmd(SCpnt,done);
}
+static DEF_SCSI_QCMD(mptfc_qcmd)
+
/*
* mptfc_display_port_link_speed - displaying link speed
* @ioc: Pointer to MPT_ADAPTER structure
}
static int
-mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptsas_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
MPT_SCSI_HOST *hd;
MPT_ADAPTER *ioc;
return mptscsih_qcmd(SCpnt,done);
}
+static DEF_SCSI_QCMD(mptsas_qcmd)
+
/**
* mptsas_mptsas_eh_timed_out - resets the scsi_cmnd timeout
* if the device under question is currently in the
}
static int
-mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptspi_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
struct _MPT_SCSI_HOST *hd = shost_priv(SCpnt->device->host);
VirtDevice *vdevice = SCpnt->device->hostdata;
return mptscsih_qcmd(SCpnt,done);
}
+static DEF_SCSI_QCMD(mptspi_qcmd)
+
static void mptspi_slave_destroy(struct scsi_device *sdev)
{
struct scsi_target *starget = scsi_target(sdev);
* Locks: takes the controller lock on error path only
*/
-static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
+static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done) (struct scsi_cmnd *))
{
struct i2o_controller *c;
exit:
return rc;
-};
+}
+
+static DEF_SCSI_QCMD(i2o_scsi_queuecommand)
/**
* i2o_scsi_abort - abort a running command
continue;
do {
- int bit = __ffs(status);
+ int bit = __ffs(value);
int line = i * 8 + bit;
handle_nested_irq(ab8500->irq_base + line);
dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret);
goto err;
}
- if (ret != 0x6204) {
+ switch (ret) {
+ case 0x6204:
+ case 0x6246:
+ break;
+ default:
dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret);
ret = -EINVAL;
goto err;
case WM8325:
ret = mfd_add_devices(wm831x->dev, -1,
wm8320_devs, ARRAY_SIZE(wm8320_devs),
- NULL, 0);
+ NULL, wm831x->irq_base);
break;
default:
return res;
als_error1:
- i2c_set_clientdata(client, NULL);
kfree(data);
return res;
}
static int isl29020_remove(struct i2c_client *client)
{
- struct als_data *data = i2c_get_clientdata(client);
sysfs_remove_group(&client->dev.kobj, &m_als_gr);
- kfree(data);
return 0;
}
module_init(sensor_isl29020_init);
module_exit(sensor_isl29020_exit);
-MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
MODULE_LICENSE("GPL v2");
* nodes that can comprise an access protection grouping. The access
* protection is in regards to memory, IOI and IPI.
*/
- max_regions = 64;
region_size = xp_region_size;
- switch (region_size) {
- case 128:
- max_regions *= 2;
- case 64:
- max_regions *= 2;
- case 32:
- max_regions *= 2;
- region_size = 16;
- DBUG_ON(!is_shub2());
+ if (is_uv())
+ max_regions = 256;
+ else {
+ max_regions = 64;
+
+ switch (region_size) {
+ case 128:
+ max_regions *= 2;
+ case 64:
+ max_regions *= 2;
+ case 32:
+ max_regions *= 2;
+ region_size = 16;
+ DBUG_ON(!is_shub2());
+ }
}
for (region = 0; region < max_regions; region++) {
if (host->caps & MMC_CAP_DISABLE)
cancel_delayed_work(&host->disable);
- cancel_delayed_work(&host->detect);
+ cancel_delayed_work_sync(&host->detect);
mmc_flush_scheduled_work();
/* clear pm flags now and let card drivers set them as needed */
case PM_POST_SUSPEND:
case PM_POST_HIBERNATION:
+ case PM_POST_RESTORE:
spin_lock_irqsave(&host->lock, flags);
host->rescan_disable = 0;
struct mmc_card *oldcard)
{
struct mmc_card *card;
- int err, ddr = MMC_SDR_MODE;
+ int err, ddr = 0;
u32 cid[4];
unsigned int max_dtr;
1 << bus_width, ddr);
err = 0;
} else {
- mmc_card_set_ddr_mode(card);
+ if (ddr)
+ mmc_card_set_ddr_mode(card);
+ else
+ ddr = MMC_SDR_MODE;
+
mmc_set_bus_width_ddr(card->host, bus_width, ddr);
}
}
BUG_ON(!host->card);
/* Make sure card is powered before detecting it */
- err = pm_runtime_get_sync(&host->card->dev);
- if (err < 0)
- goto out;
+ if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+ err = pm_runtime_get_sync(&host->card->dev);
+ if (err < 0)
+ goto out;
+ }
mmc_claim_host(host);
mmc_release_host(host);
+ /*
+ * Tell PM core it's OK to power off the card now.
+ *
+ * The _sync variant is used in order to ensure that the card
+ * is left powered off in case an error occurred, and the card
+ * is going to be removed.
+ *
+ * Since there is no specific reason to believe a new user
+ * is about to show up at this point, the _sync variant is
+ * desirable anyway.
+ */
+ if (host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_sync(&host->card->dev);
+
out:
if (err) {
mmc_sdio_remove(host);
mmc_detach_bus(host);
mmc_release_host(host);
}
-
- /* Tell PM core that we're done */
- pm_runtime_put(&host->card->dev);
}
/*
card = host->card;
/*
- * Let runtime PM core know our card is active
+ * Enable runtime PM only if supported by host+card+board
*/
- err = pm_runtime_set_active(&card->dev);
- if (err)
- goto remove;
+ if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+ /*
+ * Let runtime PM core know our card is active
+ */
+ err = pm_runtime_set_active(&card->dev);
+ if (err)
+ goto remove;
- /*
- * Enable runtime PM for this card
- */
- pm_runtime_enable(&card->dev);
+ /*
+ * Enable runtime PM for this card
+ */
+ pm_runtime_enable(&card->dev);
+ }
/*
* The number of functions on the card is encoded inside
goto remove;
/*
- * Enable Runtime PM for this func
+ * Enable Runtime PM for this func (if supported)
*/
- pm_runtime_enable(&card->sdio_func[i]->dev);
+ if (host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_enable(&card->sdio_func[i]->dev);
}
mmc_release_host(host);
#include <linux/pm_runtime.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sdio_func.h>
#include "sdio_cis.h"
* it should call pm_runtime_put_noidle() in its probe routine and
* pm_runtime_get_noresume() in its remove routine.
*/
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- goto out;
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0)
+ goto out;
+ }
/* Set the default block size so the driver is sure it's something
* sensible. */
return 0;
disable_runtimepm:
- pm_runtime_put_noidle(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_noidle(dev);
out:
return ret;
}
{
struct sdio_driver *drv = to_sdio_driver(dev->driver);
struct sdio_func *func = dev_to_sdio_func(dev);
- int ret;
+ int ret = 0;
/* Make sure card is powered before invoking ->remove() */
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- goto out;
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0)
+ goto out;
+ }
drv->remove(func);
}
/* First, undo the increment made directly above */
- pm_runtime_put_noidle(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_noidle(dev);
/* Then undo the runtime PM settings in sdio_bus_probe() */
- pm_runtime_put_noidle(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_noidle(dev);
out:
return ret;
static int sdio_bus_pm_prepare(struct device *dev)
{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+
/*
* Resume an SDIO device which was suspended at run time at this
* point, in order to allow standard SDIO suspend/resume paths
* since there is little point in failing system suspend if a
* device can't be resumed.
*/
- pm_runtime_resume(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_resume(dev);
return 0;
}
#include <linux/highmem.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
#include <asm/io.h>
#include <asm/irq.h>
else if (data->flags & MMC_DATA_WRITE)
cmdr |= AT91_MCI_TRCMD_START;
- if (data->flags & MMC_DATA_STREAM)
- cmdr |= AT91_MCI_TRTYP_STREAM;
- if (data->blocks > 1)
- cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+ if (cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
+ } else {
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= AT91_MCI_TRTYP_STREAM;
+ if (data->blocks > 1)
+ cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+ }
}
else {
block_length = 0;
#include <linux/stat.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
data = cmd->data;
if (data) {
cmdr |= MCI_CMDR_START_XFER;
- if (data->flags & MMC_DATA_STREAM)
- cmdr |= MCI_CMDR_STREAM;
- else if (data->blocks > 1)
- cmdr |= MCI_CMDR_MULTI_BLOCK;
- else
- cmdr |= MCI_CMDR_BLOCK;
+
+ if (cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmdr |= MCI_CMDR_SDIO_BLOCK;
+ } else {
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= MCI_CMDR_STREAM;
+ else if (data->blocks > 1)
+ cmdr |= MCI_CMDR_MULTI_BLOCK;
+ else
+ cmdr |= MCI_CMDR_BLOCK;
+ }
if (data->flags & MMC_DATA_READ)
cmdr |= MCI_CMDR_TRDIR_READ;
* Monitor a 0->1 transition first
*/
if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
- while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+ while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
&& (i++ < limit))
cpu_relax();
}
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
clk_enable(clk);
pltfm_host->clk = clk;
+ if (cpu_is_mx35() || cpu_is_mx51())
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ /* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+ if (cpu_is_mx25() || cpu_is_mx35())
+ host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
return 0;
}
};
struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
- .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
- | SDHCI_QUIRK_BROKEN_ADMA,
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
/* ADMA has issues. Might be fixable */
- /* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
.ops = &sdhci_esdhc_ops,
.init = esdhc_pltfm_init,
.exit = esdhc_pltfm_exit,
* ADMA operation is disabled for Moorestown platform due to
* hardware bugs.
*/
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
{
/*
- * slots number is fixed here for MRST as SDIO3 is never used and has
- * hardware bugs.
+ * slots number is fixed here for MRST as SDIO3/5 are never used and
+ * have hardware bugs.
*/
chip->num_slots = 1;
return 0;
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
};
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
- .probe = mrst_hc1_probe,
+ .probe = mrst_hc_probe,
};
static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
.device = PCI_DEVICE_ID_INTEL_MRST_SD1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_MRST_SD2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
},
{
{
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
+ mmc_pm_flag_t slot_pm_flags;
mmc_pm_flag_t pm_flags = 0;
int i, ret;
return ret;
}
- pm_flags |= slot->host->mmc->pm_flags;
+ slot_pm_flags = slot->host->mmc->pm_flags;
+ if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+ sdhci_enable_irq_wakeups(slot->host);
+
+ pm_flags |= slot_pm_flags;
}
if (chip->fixes && chip->fixes->suspend) {
pci_save_state(pdev);
if (pm_flags & MMC_PM_KEEP_POWER) {
- if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+ if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+ pci_pme_active(pdev, true);
pci_enable_wake(pdev, PCI_D3hot, 1);
+ }
pci_set_power_state(pdev, PCI_D3hot);
} else {
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
if (pdata->quirks)
host->quirks |= pdata->quirks;
+ /* If slot design supports 8 bit data, indicate this to MMC. */
+ if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(&pdev->dev, "failed to add host\n");
if (host->ops->platform_send_init_74_clocks)
host->ops->platform_send_init_74_clocks(host, ios->power_mode);
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-
- if (ios->bus_width == MMC_BUS_WIDTH_8)
- ctrl |= SDHCI_CTRL_8BITBUS;
- else
- ctrl &= ~SDHCI_CTRL_8BITBUS;
+ /*
+ * If your platform has 8-bit width support but is not a v3 controller,
+ * or if it requires special setup code, you should implement that in
+ * platform_8bit_width().
+ */
+ if (host->ops->platform_8bit_width)
+ host->ops->platform_8bit_width(host, ios->bus_width);
+ else {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (ios->bus_width == MMC_BUS_WIDTH_8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ } else {
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
- if (ios->bus_width == MMC_BUS_WIDTH_4)
- ctrl |= SDHCI_CTRL_4BITBUS;
- else
- ctrl &= ~SDHCI_CTRL_4BITBUS;
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if ((ios->timing == MMC_TIMING_SD_HS ||
ios->timing == MMC_TIMING_MMC_HS)
EXPORT_SYMBOL_GPL(sdhci_resume_host);
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+ u8 val;
+ val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+ val |= SDHCI_WAKE_ON_INT;
+ sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
#endif /* CONFIG_PM */
/*****************************************************************************\
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
mmc->f_max = host->max_clk;
mmc->caps |= MMC_CAP_SDIO_IRQ;
+ /*
+ * A controller may support 8-bit width, but the board itself
+ * might not have the pins brought out. Boards that support
+ * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+ * their platform code before calling sdhci_add_host(), and we
+ * won't assume 8-bit width for hosts without that CAP.
+ */
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
#define SDHCI_CTRL_ADMA1 0x08
#define SDHCI_CTRL_ADMA32 0x10
#define SDHCI_CTRL_ADMA64 0x18
-#define SDHCI_CTRL_8BITBUS 0x20
+#define SDHCI_CTRL_8BITBUS 0x20
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
#define SDHCI_WAKE_UP_CONTROL 0x2B
+#define SDHCI_WAKE_ON_INT 0x01
+#define SDHCI_WAKE_ON_INSERT 0x02
+#define SDHCI_WAKE_ON_REMOVE 0x04
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_SHIFT 8
#define SDHCI_CLOCK_BASE_SHIFT 8
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
+#define SDHCI_CAN_DO_8BIT 0x00040000
#define SDHCI_CAN_DO_ADMA2 0x00080000
#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_min_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
+ int (*platform_8bit_width)(struct sdhci_host *host,
+ int width);
void (*platform_send_init_74_clocks)(struct sdhci_host *host,
u8 power_mode);
unsigned int (*get_ro)(struct sdhci_host *host);
#ifdef CONFIG_PM
extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
#endif
#endif /* __SDHCI_HW_H */
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct mmc_host *mmc;
struct ushc_data *ushc;
- int ret = -ENOMEM;
+ int ret;
mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
if (mmc == NULL)
mmc->max_blk_count = 511;
ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->int_urb == NULL)
+ if (ushc->int_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
- if (ushc->int_data == NULL)
+ if (ushc->int_data == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
usb_rcvintpipe(usb_dev,
intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
intf->cur_altsetting->endpoint[0].desc.bInterval);
ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->cbw_urb == NULL)
+ if (ushc->cbw_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
- if (ushc->cbw == NULL)
+ if (ushc->cbw == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->cbw->signature = USHC_CBW_SIGNATURE;
usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
cbw_callback, ushc);
ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->data_urb == NULL)
+ if (ushc->data_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->csw_urb == NULL)
+ if (ushc->csw_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
- if (ushc->csw == NULL)
+ if (ushc->csw == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
ushc->csw, sizeof(struct ushc_csw),
csw_callback, ushc);
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define CONFIG_MTD_NAND_OMAP_HWECC
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
uint32_t data = 0;
struct ubi_vid_hdr vid_hdr;
- addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
+ /*
+ * It is important to first invalidate the EC header, and then the VID
+ * header. Otherwise a power cut may lead to valid EC header and
+ * invalid VID header, in which case UBI will treat this PEB as
+ * corrupted and will try to preserve it, and print scary warnings (see
+ * the header comment in scan.c for more information).
+ */
+ addr = (loff_t)pnum * ubi->peb_size;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
if (!err) {
- addr -= ubi->vid_hdr_aloffset;
+ addr += ubi->vid_hdr_aloffset;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
(void *)&data);
if (!err)
/*
* We failed to write to the media. This was observed with Spansion
- * S29GL512N NOR flash. Most probably the eraseblock erasure was
- * interrupted at a very inappropriate moment, so it became unwritable.
- * In this case we probably anyway have garbage in this PEB.
+ * S29GL512N NOR flash. Most probably the previously eraseblock erasure
+ * was interrupted at a very inappropriate moment, so it became
+ * unwritable. In this case we probably anyway have garbage in this
+ * PEB.
*/
err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
- if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
- /*
- * The VID header is corrupted, so we can safely erase this
- * PEB and not afraid that it will be treated as a valid PEB in
- * case of an unclean reboot.
- */
- return 0;
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) {
+ struct ubi_ec_hdr ec_hdr;
+
+ err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
+ /*
+ * Both VID and EC headers are corrupted, so we can
+ * safely erase this PEB and not afraid that it will be
+ * treated as a valid PEB in case of an unclean reboot.
+ */
+ return 0;
+ }
/*
* The PEB contains a valid VID header, but we cannot invalidate it.
* erased, so it became unstable and corrupted, and should be
* erased.
*/
- return 0;
+ err = 0;
+ goto out_unlock;
}
if (err)
- return err;
+ goto out_unlock;
- if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size)) {
- mutex_unlock(&ubi->buf_mutex);
- return 0;
- }
+ if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size))
+ goto out_unlock;
ubi_err("PEB %d contains corrupted VID header, and the data does not "
"contain all 0xFF, this may be a non-UBI PEB or a severe VID "
pnum, ubi->leb_start, ubi->leb_size);
ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
ubi->peb_buf1, ubi->leb_size, 1);
+ err = 1;
+
+out_unlock:
mutex_unlock(&ubi->buf_mutex);
- return 1;
+ return err;
}
/**
* impossible to distinguish it from a PEB which just
* contains garbage because of a power cut during erase
* operation. So we just schedule this PEB for erasure.
+ *
+ * Besides, in case of NOR flash, we deliberatly
+ * corrupt both headers because NOR flash erasure is
+ * slow and can start from the end.
*/
err = 0;
else
#define DEVICE_PCI(dev) NULL
#endif
-#define VORTEX_PCI(vp) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL)
+#define VORTEX_PCI(vp) \
+ ((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL))
#ifdef CONFIG_EISA
#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
#define DEVICE_EISA(dev) NULL
#endif
-#define VORTEX_EISA(vp) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL)
+#define VORTEX_EISA(vp) \
+ ((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL))
/* The action to take with a media selection timer tick.
Note that we deviate from the 3Com order by checking 10base2 before AUI.
{
unsigned int protocol = (status >> 16) & 0x3;
- if (likely((protocol == RxProtoTCP) && (!(status & TCPFail))))
+ if (((protocol == RxProtoTCP) && !(status & TCPFail)) ||
+ ((protocol == RxProtoUDP) && !(status & UDPFail)))
return 1;
- else if ((protocol == RxProtoUDP) && (!(status & UDPFail)))
- return 1;
- else if ((protocol == RxProtoIP) && (!(status & IPFail)))
- return 1;
- return 0;
+ else
+ return 0;
}
static int cp_rx_poll(struct napi_struct *napi, int budget)
depends on PCI
select MII
---help---
- This is a gigabit ethernet driver for Topcliff PCH.
- Topcliff PCH is the platform controller hub that is used in Intel's
+ This is a gigabit ethernet driver for EG20T PCH.
+ EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform.
- Topcliff PCH has Gigabit Ethernet interface.
+ EG20T PCH has Gigabit Ethernet interface.
Using this interface, it is able to access system devices connected
to Gigabit Ethernet.
This driver enables Gigabit Ethernet function.
source "drivers/net/caif/Kconfig"
+config TILE_NET
+ tristate "Tilera GBE/XGBE network driver support"
+ depends on TILE
+ default y
+ select CRC32
+ help
+ This is a standard Linux network device driver for the
+ on-chip Tilera Gigabit Ethernet and XAUI interfaces.
+
+ To compile this driver as a module, choose M here: the module
+ will be called tile_net.
+
config XEN_NETDEV_FRONTEND
tristate "Xen network device frontend driver"
depends on XEN
obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
obj-$(CONFIG_PCH_GBE) += pch_gbe/
+obj-$(CONFIG_TILE_NET) += tile/
addr[0] = addr[1] = 0;
AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
if (atl1c_check_eeprom_exist(hw)) {
- if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
+ if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) {
/* Enable OTP CLK */
if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
otp_ctrl_data |= OTP_CTRL_CLK_EN;
adapter->wol = 0;
+ device_set_wakeup_enable(&pdev->dev, false);
adapter->link_speed = SPEED_0;
adapter->link_duplex = FULL_DUPLEX;
adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE;
return 0;
}
-static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
+static int atl1c_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1c_adapter *adapter = netdev_priv(netdev);
struct atl1c_hw *hw = &adapter->hw;
u32 wol_ctrl_data = 0;
u16 mii_intr_status_data = 0;
u32 wufc = adapter->wol;
- int retval = 0;
atl1c_disable_l0s_l1(hw);
if (netif_running(netdev)) {
atl1c_down(adapter);
}
netif_device_detach(netdev);
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
if (wufc)
if (atl1c_phy_power_saving(hw) != 0)
AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
- /* pcie patch */
- device_set_wakeup_enable(&pdev->dev, 1);
-
AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
GPHY_CTRL_EXT_RESET);
- pci_prepare_to_sleep(pdev);
} else {
AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING);
master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
hw->phy_configured = false; /* re-init PHY when resume */
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
}
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
-static int atl1c_resume(struct pci_dev *pdev)
+static int atl1c_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1c_adapter *adapter = netdev_priv(netdev);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
ATL1C_PCIE_PHY_RESET);
static void atl1c_shutdown(struct pci_dev *pdev)
{
- atl1c_suspend(pdev, PMSG_SUSPEND);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ atl1c_suspend(&pdev->dev);
+ pci_wake_from_d3(pdev, adapter->wol);
+ pci_set_power_state(pdev, PCI_D3hot);
}
static const struct net_device_ops atl1c_netdev_ops = {
.resume = atl1c_io_resume,
};
+static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume);
+
static struct pci_driver atl1c_driver = {
.name = atl1c_driver_name,
.id_table = atl1c_pci_tbl,
.probe = atl1c_probe,
.remove = __devexit_p(atl1c_remove),
- /* Power Managment Hooks */
- .suspend = atl1c_suspend,
- .resume = atl1c_resume,
.shutdown = atl1c_shutdown,
- .err_handler = &atl1c_err_handler
+ .err_handler = &atl1c_err_handler,
+ .driver.pm = &atl1c_pm_ops,
};
/*
struct atl1_rfd_ring rfd_old, rfd_new;
struct atl1_rrd_ring rrd_old, rrd_new;
struct atl1_ring_header rhdr_old, rhdr_new;
+ struct atl1_smb smb;
+ struct atl1_cmb cmb;
int err;
tpd_old = adapter->tpd_ring;
adapter->rrd_ring = rrd_old;
adapter->tpd_ring = tpd_old;
adapter->ring_header = rhdr_old;
+ /*
+ * Save SMB and CMB, since atl1_free_ring_resources
+ * will clear them.
+ */
+ smb = adapter->smb;
+ cmb = adapter->cmb;
atl1_free_ring_resources(adapter);
adapter->rfd_ring = rfd_new;
adapter->rrd_ring = rrd_new;
adapter->tpd_ring = tpd_new;
adapter->ring_header = rhdr_new;
+ adapter->smb = smb;
+ adapter->cmb = cmb;
err = atl1_up(adapter);
if (err)
spin_lock_irqsave(&aup->lock, flags);
if (force_reset || (!aup->mac_enabled)) {
- writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+ writel(MAC_EN_CLOCK_ENABLE, aup->enable);
au_sync_delay(2);
writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
- | MAC_EN_CLOCK_ENABLE), &aup->enable);
+ | MAC_EN_CLOCK_ENABLE), aup->enable);
au_sync_delay(2);
aup->mac_enabled = 1;
au1000_hard_stop(dev);
- writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+ writel(MAC_EN_CLOCK_ENABLE, aup->enable);
au_sync_delay(2);
- writel(0, &aup->enable);
+ writel(0, aup->enable);
au_sync_delay(2);
aup->tx_full = 0;
/* set a random MAC now in case platform_data doesn't provide one */
random_ether_addr(dev->dev_addr);
- writel(0, &aup->enable);
+ writel(0, aup->enable);
aup->mac_enabled = 0;
pd = pdev->dev.platform_data;
__b44_set_flow_ctrl(bp, pause_enab);
}
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
static void b44_wap54g10_workaround(struct b44 *bp)
{
- const char *str;
+ char buf[20];
u32 val;
int err;
* see https://dev.openwrt.org/ticket/146
* check and reset bit "isolate"
*/
- str = nvram_get("boardnum");
- if (!str)
+ if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
return;
- if (simple_strtoul(str, NULL, 0) == 2) {
+ if (simple_strtoul(buf, NULL, 0) == 2) {
err = __b44_readphy(bp, 0, MII_BMCR, &val);
if (err)
goto error;
u8 __iomem *db; /* Door Bell */
u8 __iomem *pcicfg; /* PCI config space */
- spinlock_t mbox_lock; /* For serializing mbox cmds to BE card */
+ struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
struct be_dma_mem mbox_mem;
/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
* is stored for freeing purpose */
u8 *wrb;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = (u8 *)wrb_from_mbox(adapter);
*wrb++ = 0xFF;
status = be_mbox_notify_wait(adapter);
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
if (adapter->eeh_err)
return -EIO;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = (u8 *)wrb_from_mbox(adapter);
*wrb++ = 0xFF;
status = be_mbox_notify_wait(adapter);
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
int be_cmd_eq_create(struct be_adapter *adapter,
struct be_dma_mem *q_mem = &eq->dma_mem;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
eq->created = true;
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
struct be_cmd_req_mac_query *req;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
void *ctxt;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
cq->created = true;
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
void *ctxt;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
mccq->id = le16_to_cpu(resp->id);
mccq->created = true;
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
void *ctxt;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
txq->created = true;
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
struct be_dma_mem *q_mem = &rxq->dma_mem;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
*rss_id = resp->rss_id;
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
if (adapter->eeh_err)
return -EIO;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
status = be_mbox_notify_wait(adapter);
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
struct be_cmd_req_if_create *req;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
*pmac_id = le32_to_cpu(resp->pmac_id);
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
if (adapter->eeh_err)
return -EIO;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
status = be_mbox_notify_wait(adapter);
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
struct be_cmd_req_get_fw_version *req;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
i = 0;
netdev_for_each_mc_addr(ha, netdev)
- memcpy(req->mac[i].byte, ha->addr, ETH_ALEN);
+ memcpy(req->mac[i++].byte, ha->addr, ETH_ALEN);
} else {
req->promiscuous = 1;
}
struct be_cmd_req_query_fw_cfg *req;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
*caps = le32_to_cpu(resp->function_caps);
}
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
struct be_cmd_req_hdr *req;
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
status = be_mbox_notify_wait(adapter);
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
u32 myhash[10];
int status;
- spin_lock(&adapter->mbox_lock);
+ if (mutex_lock_interruptible(&adapter->mbox_lock))
+ return -1;
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
status = be_mbox_notify_wait(adapter);
- spin_unlock(&adapter->mbox_lock);
+ mutex_unlock(&adapter->mbox_lock);
return status;
}
int status, i = 0, num_imgs = 0;
const u8 *p;
+ if (!netif_running(adapter->netdev)) {
+ dev_err(&adapter->pdev->dev,
+ "Firmware load not allowed (interface is down)\n");
+ return -EPERM;
+ }
+
strcpy(fw_file, func);
status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
}
memset(mc_cmd_mem->va, 0, mc_cmd_mem->size);
- spin_lock_init(&adapter->mbox_lock);
+ mutex_init(&adapter->mbox_lock);
spin_lock_init(&adapter->mcc_lock);
spin_lock_init(&adapter->mcc_cq_lock);
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.60.00-4"
-#define DRV_MODULE_RELDATE "2010/11/01"
+#define DRV_MODULE_VERSION "1.60.01-0"
+#define DRV_MODULE_RELDATE "2010/11/12"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
}
#endif
-static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb,
- struct eth_tx_parse_bd_e2 *pbd,
- u32 xmit_type)
+static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
+ u32 xmit_type)
{
- pbd->parsing_data |= cpu_to_le16(skb_shinfo(skb)->gso_size) <<
- ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT;
+ *parsing_data |= (skb_shinfo(skb)->gso_size <<
+ ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
+ ETH_TX_PARSE_BD_E2_LSO_MSS;
if ((xmit_type & XMIT_GSO_V6) &&
(ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
- pbd->parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
+ *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
}
/**
* @return header len
*/
static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
- struct eth_tx_parse_bd_e2 *pbd,
- u32 xmit_type)
+ u32 *parsing_data, u32 xmit_type)
{
- pbd->parsing_data |= cpu_to_le16(tcp_hdrlen(skb)/4) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT;
+ *parsing_data |= ((tcp_hdrlen(skb)/4) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
- pbd->parsing_data |= cpu_to_le16(((unsigned char *)tcp_hdr(skb) -
- skb->data) / 2) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT;
+ *parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
}
struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
+ u32 pbd_e2_parsing_data = 0;
u16 pkt_prod, bd_prod;
int nbd, fp_index;
dma_addr_t mapping;
memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
/* Set PBD in checksum offload case */
if (xmit_type & XMIT_CSUM)
- hlen = bnx2x_set_pbd_csum_e2(bp,
- skb, pbd_e2, xmit_type);
+ hlen = bnx2x_set_pbd_csum_e2(bp, skb,
+ &pbd_e2_parsing_data,
+ xmit_type);
} else {
pbd_e1x = &fp->tx_desc_ring[bd_prod].parse_bd_e1x;
memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
bd_prod = bnx2x_tx_split(bp, fp, tx_buf, &tx_start_bd,
hlen, bd_prod, ++nbd);
if (CHIP_IS_E2(bp))
- bnx2x_set_pbd_gso_e2(skb, pbd_e2, xmit_type);
+ bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
+ xmit_type);
else
bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
}
+
+ /* Set the PBD's parsing_data field if not zero
+ * (for the chips newer than 57711).
+ */
+ if (pbd_e2_parsing_data)
+ pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
+
tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
/* Handle fragmented skb */
/****************************************************************************
* SRC initializations
****************************************************************************/
-
+#ifdef BCM_CNIC
/* called during init func stage */
static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
dma_addr_t t2_mapping, int src_cid_count)
U64_HI((u64)t2_mapping +
(src_cid_count-1) * sizeof(struct src_ent)));
}
-
+#endif
#endif /* BNX2X_INIT_OPS_H */
default:
pr_err("Unknown board_type (%ld), aborting\n",
ent->driver_data);
- return ENODEV;
+ return -ENODEV;
}
cid_count += CNIC_CONTEXT_USE;
}
if (vlan_id) {
- skb = vlan_put_tag(skb, vlan_id);
+ /* The Ethernet header is not present yet, so it is
+ * too early to insert a VLAN tag. Force use of an
+ * out-of-line tag here and let dev_hard_start_xmit()
+ * insert it if the slave hardware can't.
+ */
+ skb = __vlan_hwaccel_put_tag(skb, vlan_id);
if (!skb) {
pr_err("failed to insert VLAN tag\n");
return;
/*----------------------------- Global variables ----------------------------*/
#ifdef CONFIG_NET_POLL_CONTROLLER
-cpumask_var_t netpoll_block_tx;
+atomic_t netpoll_block_tx = ATOMIC_INIT(0);
#endif
static const char * const version =
* @bond: bond device that got this skb for tx.
* @skb: hw accel VLAN tagged skb to transmit
* @slave_dev: slave that is supposed to xmit this skbuff
- *
- * When the bond gets an skb to transmit that is
- * already hardware accelerated VLAN tagged, and it
- * needs to relay this skb to a slave that is not
- * hw accel capable, the skb needs to be "unaccelerated",
- * i.e. strip the hwaccel tag and re-insert it as part
- * of the payload.
*/
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
struct net_device *slave_dev)
{
- unsigned short uninitialized_var(vlan_id);
-
- /* Test vlan_list not vlgrp to catch and handle 802.1p tags */
- if (!list_empty(&bond->vlan_list) &&
- !(slave_dev->features & NETIF_F_HW_VLAN_TX) &&
- vlan_get_tag(skb, &vlan_id) == 0) {
- skb->dev = slave_dev;
- skb = vlan_put_tag(skb, vlan_id);
- if (!skb) {
- /* vlan_put_tag() frees the skb in case of error,
- * so return success here so the calling functions
- * won't attempt to free is again.
- */
- return 0;
- }
- } else {
- skb->dev = slave_dev;
- }
-
+ skb->dev = slave_dev;
skb->priority = 1;
#ifdef CONFIG_NET_POLL_CONTROLLER
if (unlikely(bond->dev->priv_flags & IFF_IN_NETPOLL)) {
rcu_read_lock();
in_dev = __in_dev_get_rcu(dev);
if (in_dev) {
+ read_lock(&in_dev->mc_list_lock);
for (im = in_dev->mc_list; im; im = im->next)
ip_mc_rejoin_group(im);
+ read_unlock(&in_dev->mc_list_lock);
}
rcu_read_unlock();
bond_do_fail_over_mac(bond, new_active,
old_active);
- bond->send_grat_arp = bond->params.num_grat_arp;
- bond_send_gratuitous_arp(bond);
+ if (netif_running(bond->dev)) {
+ bond->send_grat_arp = bond->params.num_grat_arp;
+ bond_send_gratuitous_arp(bond);
- bond->send_unsol_na = bond->params.num_unsol_na;
- bond_send_unsolicited_na(bond);
+ bond->send_unsol_na = bond->params.num_unsol_na;
+ bond_send_unsolicited_na(bond);
+ }
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
/* resend IGMP joins since active slave has changed or
* all were sent on curr_active_slave */
- if ((USES_PRIMARY(bond->params.mode) && new_active) ||
- bond->params.mode == BOND_MODE_ROUNDROBIN) {
+ if (((USES_PRIMARY(bond->params.mode) && new_active) ||
+ bond->params.mode == BOND_MODE_ROUNDROBIN) &&
+ netif_running(bond->dev)) {
bond->igmp_retrans = bond->params.resend_igmp;
queue_delayed_work(bond->wq, &bond->mcast_work, 0);
}
/* If this is the first slave, then we need to set the master's hardware
* address to be the same as the slave's. */
- if (bond->slave_cnt == 0)
+ if (is_zero_ether_addr(bond->dev->dev_addr))
memcpy(bond->dev->dev_addr, slave_dev->dev_addr,
slave_dev->addr_len);
if (res)
goto out;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (!alloc_cpumask_var(&netpoll_block_tx, GFP_KERNEL)) {
- res = -ENOMEM;
- goto out;
- }
-#endif
-
res = register_pernet_subsys(&bond_net_ops);
if (res)
goto out;
rtnl_link_unregister(&bond_link_ops);
err_link:
unregister_pernet_subsys(&bond_net_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- free_cpumask_var(netpoll_block_tx);
-#endif
goto out;
}
unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
- free_cpumask_var(netpoll_block_tx);
+ /*
+ * Make sure we don't have an imbalance on our netpoll blocking
+ */
+ WARN_ON(atomic_read(&netpoll_block_tx));
#endif
}
#ifdef CONFIG_NET_POLL_CONTROLLER
-extern cpumask_var_t netpoll_block_tx;
+extern atomic_t netpoll_block_tx;
static inline void block_netpoll_tx(void)
{
- preempt_disable();
- BUG_ON(cpumask_test_and_set_cpu(smp_processor_id(),
- netpoll_block_tx));
+ atomic_inc(&netpoll_block_tx);
}
static inline void unblock_netpoll_tx(void)
{
- BUG_ON(!cpumask_test_and_clear_cpu(smp_processor_id(),
- netpoll_block_tx));
- preempt_enable();
+ atomic_dec(&netpoll_block_tx);
}
static inline int is_netpoll_tx_blocked(struct net_device *dev)
{
if (unlikely(dev->priv_flags & IFF_IN_NETPOLL))
- return cpumask_test_cpu(smp_processor_id(), netpoll_block_tx);
+ return atomic_read(&netpoll_block_tx);
return 0;
}
#else
bond_for_each_slave(bond, slave, i) {
if (slave->dev == slave_dev) {
- break;
+ return slave;
}
}
- return slave;
+ return 0;
}
static inline struct bonding *bond_get_bond_by_slave(struct slave *slave)
* License terms: GNU General Public License (GPL) version 2
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
#include <linux/version.h>
#include <linux/init.h>
* License terms: GNU General Public License (GPL) version 2
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
#include <linux/spinlock.h>
#include <linux/sched.h>
ndev = alloc_netdev(sizeof(struct cfspi),
"cfspi%d", cfspi_setup);
- if (!dev)
- return -ENODEV;
+ if (!ndev)
+ return -ENOMEM;
cfspi = netdev_priv(ndev);
netif_stop_queue(ndev);
&udev->l2_ring_map,
GFP_KERNEL | __GFP_COMP);
if (!udev->l2_ring)
- return -ENOMEM;
+ goto err_udev;
udev->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
udev->l2_buf_size = PAGE_ALIGN(udev->l2_buf_size);
&udev->l2_buf_map,
GFP_KERNEL | __GFP_COMP);
if (!udev->l2_buf)
- return -ENOMEM;
+ goto err_dma;
write_lock(&cnic_dev_lock);
list_add(&udev->list, &cnic_udev_list);
cp->udev = udev;
return 0;
+ err_dma:
+ dma_free_coherent(&udev->pdev->dev, udev->l2_ring_size,
+ udev->l2_ring, udev->l2_ring_map);
+ err_udev:
+ kfree(udev);
+ return -ENOMEM;
}
static int cnic_init_uio(struct cnic_dev *dev)
if (index < NEXACT_MAC)
ret++;
else if (hash)
- *hash |= (1 << hash_mac_addr(addr[i]));
+ *hash |= (1ULL << hash_mac_addr(addr[i]));
}
return ret;
}
}
/*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
*/
-static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
- const u8 **addr,
- unsigned int maxaddrs)
+static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
+ const u8 **addr,
+ unsigned int offset,
+ unsigned int maxaddrs)
{
+ unsigned int index = 0;
unsigned int naddr = 0;
const struct netdev_hw_addr *ha;
- for_each_dev_addr(dev, ha) {
- addr[naddr++] = ha->addr;
- if (naddr >= maxaddrs)
- break;
- }
+ for_each_dev_addr(dev, ha)
+ if (index++ >= offset) {
+ addr[naddr++] = ha->addr;
+ if (naddr >= maxaddrs)
+ break;
+ }
return naddr;
}
/*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
*/
-static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
- const u8 **addr,
- unsigned int maxaddrs)
+static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
+ const u8 **addr,
+ unsigned int offset,
+ unsigned int maxaddrs)
{
+ unsigned int index = 0;
unsigned int naddr = 0;
const struct netdev_hw_addr *ha;
- netdev_for_each_mc_addr(ha, dev) {
- addr[naddr++] = ha->addr;
- if (naddr >= maxaddrs)
- break;
- }
+ netdev_for_each_mc_addr(ha, dev)
+ if (index++ >= offset) {
+ addr[naddr++] = ha->addr;
+ if (naddr >= maxaddrs)
+ break;
+ }
return naddr;
}
u64 mhash = 0;
u64 uhash = 0;
bool free = true;
- u16 filt_idx[7];
+ unsigned int offset, naddr;
const u8 *addr[7];
- int ret, naddr = 0;
+ int ret;
const struct port_info *pi = netdev_priv(dev);
/* first do the secondary unicast addresses */
- naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
- if (naddr > 0) {
+ for (offset = 0; ; offset += naddr) {
+ naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
+ ARRAY_SIZE(addr));
+ if (naddr == 0)
+ break;
+
ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
- naddr, addr, filt_idx, &uhash, sleep);
+ naddr, addr, NULL, &uhash, sleep);
if (ret < 0)
return ret;
}
/* next set up the multicast addresses */
- naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
- if (naddr > 0) {
+ for (offset = 0; ; offset += naddr) {
+ naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
+ ARRAY_SIZE(addr));
+ if (naddr == 0)
+ break;
+
ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
- naddr, addr, filt_idx, &mhash, sleep);
+ naddr, addr, NULL, &mhash, sleep);
if (ret < 0)
return ret;
+ free = false;
}
return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,
{
struct sge *s = &adapter->sge;
int q10g, n10g, qidx, pidx, qs;
+ size_t iqe_size;
/*
* We should not be called till we know how many Queue Sets we can
}
s->ethqsets = qidx;
+ /*
+ * The Ingress Queue Entry Size for our various Response Queues needs
+ * to be big enough to accommodate the largest message we can receive
+ * from the chip/firmware; which is 64 bytes ...
+ */
+ iqe_size = 64;
+
/*
* Set up default Queue Set parameters ... Start off with the
* shortest interrupt holdoff timer.
struct sge_eth_rxq *rxq = &s->ethrxq[qs];
struct sge_eth_txq *txq = &s->ethtxq[qs];
- init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES);
+ init_rspq(&rxq->rspq, 0, 0, 1024, iqe_size);
rxq->fl.size = 72;
txq->q.size = 1024;
}
* The firmware event queue is used for link state changes and
* notifications of TX DMA completions.
*/
- init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512,
- L1_CACHE_BYTES);
+ init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, iqe_size);
/*
* The forwarded interrupt queue is used when we're in MSI interrupt
* any time ...
*/
init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1,
- L1_CACHE_BYTES);
+ iqe_size);
}
/*
unsigned int naddr, const u8 **addr, u16 *idx,
u64 *hash, bool sleep_ok)
{
- int i, ret;
+ int offset, ret = 0;
+ unsigned nfilters = 0;
+ unsigned int rem = naddr;
struct fw_vi_mac_cmd cmd, rpl;
- struct fw_vi_mac_exact *p;
- size_t len16;
- if (naddr > ARRAY_SIZE(cmd.u.exact))
+ if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
return -EINVAL;
- len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
- u.exact[naddr]), 16);
- memset(&cmd, 0, sizeof(cmd));
- cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
- FW_CMD_REQUEST |
- FW_CMD_WRITE |
- (free ? FW_CMD_EXEC : 0) |
- FW_VI_MAC_CMD_VIID(viid));
- cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
- FW_CMD_LEN16(len16));
+ for (offset = 0; offset < naddr; /**/) {
+ unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
+ ? rem
+ : ARRAY_SIZE(cmd.u.exact));
+ size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
+ u.exact[fw_naddr]), 16);
+ struct fw_vi_mac_exact *p;
+ int i;
- for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) {
- p->valid_to_idx =
- cpu_to_be16(FW_VI_MAC_CMD_VALID |
- FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
- memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
- }
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
+ FW_CMD_REQUEST |
+ FW_CMD_WRITE |
+ (free ? FW_CMD_EXEC : 0) |
+ FW_VI_MAC_CMD_VIID(viid));
+ cmd.freemacs_to_len16 =
+ cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
+ FW_CMD_LEN16(len16));
+
+ for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
+ p->valid_to_idx = cpu_to_be16(
+ FW_VI_MAC_CMD_VALID |
+ FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
+ memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
+ }
+
+
+ ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
+ sleep_ok);
+ if (ret && ret != -ENOMEM)
+ break;
- ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok);
- if (ret)
- return ret;
-
- for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) {
- u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
-
- if (idx)
- idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES
- ? 0xffff
- : index);
- if (index < FW_CLS_TCAM_NUM_ENTRIES)
- ret++;
- else if (hash)
- *hash |= (1 << hash_mac_addr(addr[i]));
+ for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
+ u16 index = FW_VI_MAC_CMD_IDX_GET(
+ be16_to_cpu(p->valid_to_idx));
+
+ if (idx)
+ idx[offset+i] =
+ (index >= FW_CLS_TCAM_NUM_ENTRIES
+ ? 0xffff
+ : index);
+ if (index < FW_CLS_TCAM_NUM_ENTRIES)
+ nfilters++;
+ else if (hash)
+ *hash |= (1ULL << hash_mac_addr(addr[offset+i]));
+ }
+
+ free = false;
+ offset += fw_naddr;
+ rem -= fw_naddr;
}
+
+ /*
+ * If there were no errors or we merely ran out of room in our MAC
+ * address arena, return the number of filters actually written.
+ */
+ if (ret == 0 || ret == -ENOMEM)
+ ret = nfilters;
return ret;
}
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k6-NAPI"
+#define DRV_VERSION "7.3.21-k8-NAPI"
const char e1000_driver_version[] = DRV_VERSION;
static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
struct net_device *netdev = adapter->netdev;
u32 rctl, tctl;
- /* signal that we're down so the interrupt handler does not
- * reschedule our watchdog timer */
- set_bit(__E1000_DOWN, &adapter->flags);
/* disable receives in the hardware */
rctl = er32(RCTL);
e1000_irq_disable(adapter);
+ /*
+ * Setting DOWN must be after irq_disable to prevent
+ * a screaming interrupt. Setting DOWN also prevents
+ * timers and tasks from rescheduling.
+ */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
}
+static int ehea_set_flags(struct net_device *dev, u32 data)
+{
+ /* Avoid changing the VLAN flags */
+ if ((data & (ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN)) !=
+ (ethtool_op_get_flags(dev) & (ETH_FLAG_RXVLAN |
+ ETH_FLAG_TXVLAN))){
+ return -EINVAL;
+ }
+
+ return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO
+ | ETH_FLAG_TXVLAN
+ | ETH_FLAG_RXVLAN);
+}
+
const struct ethtool_ops ehea_ethtool_ops = {
.get_settings = ehea_get_settings,
.get_drvinfo = ehea_get_drvinfo,
.get_ethtool_stats = ehea_get_ethtool_stats,
.get_rx_csum = ehea_get_rx_csum,
.set_settings = ehea_set_settings,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = ehea_set_flags,
.nway_reset = ehea_nway_reset, /* Restart autonegotiation */
};
skb_arr_rq1[index] = netdev_alloc_skb(dev,
EHEA_L_PKT_SIZE);
if (!skb_arr_rq1[index]) {
+ ehea_info("Unable to allocate enough skb in the array\n");
pr->rq1_skba.os_skbs = fill_wqes - i;
break;
}
struct net_device *dev = pr->port->netdev;
int i;
- for (i = 0; i < pr->rq1_skba.len; i++) {
+ if (nr_rq1a > pr->rq1_skba.len) {
+ ehea_error("NR_RQ1A bigger than skb array len\n");
+ return;
+ }
+
+ for (i = 0; i < nr_rq1a; i++) {
skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE);
- if (!skb_arr_rq1[i])
+ if (!skb_arr_rq1[i]) {
+ ehea_info("No enough memory to allocate skb array\n");
break;
+ }
}
/* Ring doorbell */
- ehea_update_rq1a(pr->qp, nr_rq1a);
+ ehea_update_rq1a(pr->qp, i);
}
static int ehea_refill_rq_def(struct ehea_port_res *pr,
int vlan_extracted = ((cqe->status & EHEA_CQE_VLAN_TAG_XTRACT) &&
pr->port->vgrp);
- if (use_lro) {
+ if (skb->dev->features & NETIF_F_LRO) {
if (vlan_extracted)
lro_vlan_hwaccel_receive_skb(&pr->lro_mgr, skb,
pr->port->vgrp,
skb = netdev_alloc_skb(dev,
EHEA_L_PKT_SIZE);
- if (!skb)
+ if (!skb) {
+ ehea_info("Not enough memory to allocate skb\n");
break;
+ }
}
skb_copy_to_linear_data(skb, ((char *)cqe) + 64,
cqe->num_bytes_transfered - 4);
}
cqe = ehea_poll_rq1(qp, &wqe_index);
}
- if (use_lro)
+ if (dev->features & NETIF_F_LRO)
lro_flush_all(&pr->lro_mgr);
pr->rx_packets += processed;
| NETIF_F_LLTX;
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
+ if (use_lro)
+ dev->features |= NETIF_F_LRO;
+
INIT_WORK(&port->reset_task, ehea_reset_port);
ret = register_netdev(dev);
case VNIC_DEV_INTR_MODE_MSIX:
for (i = 0; i < enic->rq_count; i++) {
intr = enic_msix_rq_intr(enic, i);
- enic_isr_msix_rq(enic->msix_entry[intr].vector, enic);
+ enic_isr_msix_rq(enic->msix_entry[intr].vector,
+ &enic->napi[i]);
}
intr = enic_msix_wq_intr(enic, i);
enic_isr_msix_wq(enic->msix_entry[intr].vector, enic);
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz);
+ struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz + 2);
ep->rx_skbuff[i] = skb;
if (skb == NULL)
break;
entry = ep->dirty_rx % RX_RING_SIZE;
if (ep->rx_skbuff[entry] == NULL) {
struct sk_buff *skb;
- skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz);
+ skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz + 2);
if (skb == NULL)
break;
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
irq_of_parse_and_map(np, 1);
priv->gfargrp[priv->num_grps].interruptError =
irq_of_parse_and_map(np,2);
- if (priv->gfargrp[priv->num_grps].interruptTransmit < 0 ||
- priv->gfargrp[priv->num_grps].interruptReceive < 0 ||
- priv->gfargrp[priv->num_grps].interruptError < 0) {
+ if (priv->gfargrp[priv->num_grps].interruptTransmit == NO_IRQ ||
+ priv->gfargrp[priv->num_grps].interruptReceive == NO_IRQ ||
+ priv->gfargrp[priv->num_grps].interruptError == NO_IRQ)
return -EINVAL;
- }
}
priv->gfargrp[priv->num_grps].grp_id = priv->num_grps;
}
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz);
+ struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz + 2);
hmp->rx_skbuff[i] = skb;
if (skb == NULL)
break;
entry = hmp->dirty_rx % RX_RING_SIZE;
desc = &(hmp->rx_ring[entry]);
if (hmp->rx_skbuff[entry] == NULL) {
- struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz);
+ struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz + 2);
hmp->rx_skbuff[entry] = skb;
if (skb == NULL)
rcu_read_unlock();
dev_kfree_skb(skb);
stats->tx_dropped++;
+ if (skb_queue_len(&dp->tq) != 0)
+ goto resched;
break;
}
rcu_read_unlock();
"IC PLUS IP1000 1000/100/10 based NIC",
"Sundance Technology ST2021 based NIC",
"Tamarack Microelectronics TC9020/9021 based NIC",
- "Tamarack Microelectronics TC9020/9021 based NIC",
"D-Link NIC IP1000A"
};
static DEFINE_PCI_DEVICE_TABLE(ipg_pci_tbl) = {
{ PCI_VDEVICE(SUNDANCE, 0x1023), 0 },
{ PCI_VDEVICE(SUNDANCE, 0x2021), 1 },
- { PCI_VDEVICE(SUNDANCE, 0x1021), 2 },
- { PCI_VDEVICE(DLINK, 0x9021), 3 },
- { PCI_VDEVICE(DLINK, 0x4020), 4 },
+ { PCI_VDEVICE(DLINK, 0x9021), 2 },
+ { PCI_VDEVICE(DLINK, 0x4020), 3 },
{ 0, }
};
/* Baud Rate Error Correction x 10000 */
u32 rate_err_array[] = {
- 0000, 0625, 1250, 1875,
+ 0, 625, 1250, 1875,
2500, 3125, 3750, 4375,
5000, 5625, 6250, 6875,
7500, 8125, 8750, 9375,
adapter->rx_ring[i] = NULL;
}
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+
ixgbe_free_q_vectors(adapter);
ixgbe_reset_interrupt_capability(adapter);
}
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET);
dev_cap->bf_reg_size = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET);
+ if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size)) {
+ mlx4_warn(dev, "firmware bug: log2 # of blue flame regs is invalid (%d), forcing 3\n", field & 0x1f);
+ field = 3;
+ }
dev_cap->bf_regs_per_page = 1 << (field & 0x3f);
mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n",
dev_cap->bf_reg_size, dev_cap->bf_regs_per_page);
/*
* Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
*
* This code was derived from the Intel e1000e Linux driver.
*
module_init(pch_gbe_init_module);
module_exit(pch_gbe_exit_module);
-MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver");
-MODULE_AUTHOR("OKI semiconductor, <masa-korg@dsn.okisemi.com>");
+MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);
.err = "using default of "
__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
.def = PCH_GBE_DEFAULT_TXD,
- .arg = { .r = { .min = PCH_GBE_MIN_TXD } },
- .arg = { .r = { .max = PCH_GBE_MAX_TXD } }
+ .arg = { .r = { .min = PCH_GBE_MIN_TXD,
+ .max = PCH_GBE_MAX_TXD } }
};
struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
tx_ring->count = TxDescriptors;
.err = "using default of "
__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
.def = PCH_GBE_DEFAULT_RXD,
- .arg = { .r = { .min = PCH_GBE_MIN_RXD } },
- .arg = { .r = { .max = PCH_GBE_MAX_RXD } }
+ .arg = { .r = { .min = PCH_GBE_MIN_RXD,
+ .max = PCH_GBE_MAX_RXD } }
};
struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
rx_ring->count = RxDescriptors;
static struct pcmcia_device_id axnet_ids[] = {
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x016c, 0x0081),
PCMCIA_DEVICE_MANF_CARD(0x018a, 0x0301),
+ PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0301),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0303),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
- PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
- Currently supports the IP175C PHY.
+ Currently supports the IP175C and IP1001 PHYs.
config REALTEK_PHY
tristate "Drivers for Realtek PHYs"
#include <asm/irq.h>
#include <asm/uaccess.h>
-MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
return 0;
}
+static int ip1001_config_init(struct phy_device *phydev)
+{
+ int err, value;
+
+ /* Software Reset PHY */
+ value = phy_read(phydev, MII_BMCR);
+ value |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, value);
+ if (err < 0)
+ return err;
+
+ do {
+ value = phy_read(phydev, MII_BMCR);
+ } while (value & BMCR_RESET);
+
+ /* Additional delay (2ns) used to adjust RX clock phase
+ * at GMII/ RGMII interface */
+ value = phy_read(phydev, 16);
+ value |= 0x3;
+
+ err = phy_write(phydev, 16, value);
+ if (err < 0)
+ return err;
+
+ return err;
+}
+
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->addr == 4) /* WAN port */
.driver = { .owner = THIS_MODULE,},
};
-static int __init ip175c_init(void)
+static struct phy_driver ip1001_driver = {
+ .phy_id = 0x02430d90,
+ .name = "ICPlus IP1001",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause,
+ .config_init = &ip1001_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init icplus_init(void)
{
+ int ret = 0;
+
+ ret = phy_driver_register(&ip1001_driver);
+ if (ret < 0)
+ return -ENODEV;
+
return phy_driver_register(&ip175c_driver);
}
-static void __exit ip175c_exit(void)
+static void __exit icplus_exit(void)
{
+ phy_driver_unregister(&ip1001_driver);
phy_driver_unregister(&ip175c_driver);
}
-module_init(ip175c_init);
-module_exit(ip175c_exit);
+module_init(icplus_init);
+module_exit(icplus_exit);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
+ { 0x02430d90, 0x0ffffff0 },
{ }
};
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
+#include <linux/of.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
+#define MII_MARVELL_PHY_PAGE 22
+
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
-#define MII_88E1121_PHY_PAGE 22
#define MII_M1011_PHY_STATUS 0x11
#define MII_M1011_PHY_STATUS_1000 0x8000
return 0;
}
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ const __be32 *paddr;
+ int len, i, saved_page, current_page, page_changed, ret;
+
+ if (!phydev->dev.of_node)
+ return 0;
+
+ paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+ if (!paddr || len < (4 * sizeof(*paddr)))
+ return 0;
+
+ saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+ if (saved_page < 0)
+ return saved_page;
+ page_changed = 0;
+ current_page = saved_page;
+
+ ret = 0;
+ len /= sizeof(*paddr);
+ for (i = 0; i < len - 3; i += 4) {
+ u16 reg_page = be32_to_cpup(paddr + i);
+ u16 reg = be32_to_cpup(paddr + i + 1);
+ u16 mask = be32_to_cpup(paddr + i + 2);
+ u16 val_bits = be32_to_cpup(paddr + i + 3);
+ int val;
+
+ if (reg_page != current_page) {
+ current_page = reg_page;
+ page_changed = 1;
+ ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+ if (ret < 0)
+ goto err;
+ }
+
+ val = 0;
+ if (mask) {
+ val = phy_read(phydev, reg);
+ if (val < 0) {
+ ret = val;
+ goto err;
+ }
+ val &= mask;
+ }
+ val |= val_bits;
+
+ ret = phy_write(phydev, reg, val);
+ if (ret < 0)
+ goto err;
+
+ }
+err:
+ if (page_changed) {
+ i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+ if (ret == 0)
+ ret = i;
+ }
+ return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
static int m88e1121_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
- oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
- err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
return err;
}
- phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
if (err < 0)
return err;
- oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
- phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
- phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
err = genphy_config_aneg(phydev);
{
int err, oldpage, mscr;
- oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
- err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
if (err < 0)
return err;
- err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
if (err < 0)
return err;
return err;
}
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
int err;
/* Change address */
- err = phy_write(phydev, 0x16, 0x0002);
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
if (err < 0)
return err;
return err;
/* Change address */
- err = phy_write(phydev, 0x16, 0x0003);
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
if (err < 0)
return err;
if (err < 0)
return err;
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
/* Reset address */
- err = phy_write(phydev, 0x16, 0x0);
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1048);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
if (err < 0)
return err;
}
}
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
return 0;
}
.config_intr = &marvell_config_intr,
.driver = { .owner = THIS_MODULE },
},
+ {
+ .phy_id = MARVELL_PHY_ID_88E1149R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1149R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1149_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
{
.phy_id = MARVELL_PHY_ID_88E1240,
.phy_id_mask = MARVELL_PHY_ID_MASK,
{ 0x01410e10, 0xfffffff0 },
{ 0x01410cb0, 0xfffffff0 },
{ 0x01410cd0, 0xfffffff0 },
+ { 0x01410e50, 0xfffffff0 },
{ 0x01410e30, 0xfffffff0 },
{ 0x01410e90, 0xfffffff0 },
{ }
}
#ifdef CONFIG_PPP_MULTILINK
+static bool mp_protocol_compress __read_mostly = true;
+module_param(mp_protocol_compress, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(mp_protocol_compress,
+ "compress protocol id in multilink fragments");
+
/*
* Divide a packet to be transmitted into fragments and
* send them out the individual links.
if (nfree == 0 || nfree < navail / 2)
return 0; /* can't take now, leave it in xmit_pending */
- /* Do protocol field compression (XXX this should be optional) */
+ /* Do protocol field compression */
p = skb->data;
len = skb->len;
- if (*p == 0) {
+ if (*p == 0 && mp_protocol_compress) {
++p;
--len;
}
*/
dev_net_set(dev, net);
- ret = -EEXIST;
mutex_lock(&pn->all_ppp_mutex);
if (unit < 0) {
unit = unit_get(&pn->units_idr, ppp);
if (unit < 0) {
- *retp = unit;
+ ret = unit;
goto out2;
}
} else {
+ ret = -EEXIST;
if (unit_find(&pn->units_idr, unit))
goto out2; /* unit already exists */
/*
ppp->closing = 1;
ppp_unlock(ppp);
unregister_netdev(ppp->dev);
+ unit_put(&pn->units_idr, ppp->file.index);
} else
ppp_unlock(ppp);
- unit_put(&pn->units_idr, ppp->file.index);
ppp->file.dead = 1;
ppp->owner = NULL;
wake_up_interruptible(&ppp->file.rwait);
* by holding all_ppp_mutex
*/
-/* associate pointer with specified number */
-static int unit_set(struct idr *p, void *ptr, int n)
+static int __unit_alloc(struct idr *p, void *ptr, int n)
{
int unit, err;
}
err = idr_get_new_above(p, ptr, n, &unit);
- if (err == -EAGAIN)
- goto again;
+ if (err < 0) {
+ if (err == -EAGAIN)
+ goto again;
+ return err;
+ }
- if (unit != n) {
+ return unit;
+}
+
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+ int unit;
+
+ unit = __unit_alloc(p, ptr, n);
+ if (unit < 0)
+ return unit;
+ else if (unit != n) {
idr_remove(p, unit);
return -EINVAL;
}
/* get new free unit number and associate pointer with it */
static int unit_get(struct idr *p, void *ptr)
{
- int unit, err;
-
-again:
- if (!idr_pre_get(p, GFP_KERNEL)) {
- printk(KERN_ERR "PPP: No free memory for idr\n");
- return -ENOMEM;
- }
-
- err = idr_get_new_above(p, ptr, 0, &unit);
- if (err == -EAGAIN)
- goto again;
-
- return unit;
+ return __unit_alloc(p, ptr, 0);
}
/* put unit number back to a pool */
abort:
kfree_skb(skb);
- return 0;
+ return 1;
}
/************************************************************************
u32 mailbox_in;
u32 mailbox_out;
struct mbox_params idc_mbc;
+ struct mutex mpi_mutex;
int tx_ring_size;
int rx_ring_size;
/* NETIF_MSG_PKTDATA | */
NETIF_MSG_HW | NETIF_MSG_WOL | 0;
-static int debug = 0x00007fff; /* defaults above */
-module_param(debug, int, 0);
+static int debug = -1; /* defaults above */
+module_param(debug, int, 0664);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
#define MSIX_IRQ 0
#define MSI_IRQ 1
#define LEG_IRQ 2
static int qlge_irq_type = MSIX_IRQ;
-module_param(qlge_irq_type, int, MSIX_IRQ);
+module_param(qlge_irq_type, int, 0664);
MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
static int qlge_mpi_coredump;
INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
INIT_DELAYED_WORK(&qdev->mpi_core_to_log, ql_mpi_core_to_log);
init_completion(&qdev->ide_completion);
+ mutex_init(&qdev->mpi_mutex);
if (!cards_found) {
dev_info(&pdev->dev, "%s\n", DRV_STRING);
int status;
unsigned long count;
+ mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
end:
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+ mutex_unlock(&qdev->mpi_mutex);
return status;
}
static int ql_set_port_cfg(struct ql_adapter *qdev)
{
int status;
- rtnl_lock();
status = ql_mb_set_port_cfg(qdev);
- rtnl_unlock();
if (status)
return status;
status = ql_idc_wait(qdev);
container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
int status;
- rtnl_lock();
status = ql_mb_get_port_cfg(qdev);
- rtnl_unlock();
if (status) {
netif_err(qdev, drv, qdev->ndev,
"Bug: Failed to get port config data.\n");
u32 aen;
int timeout;
- rtnl_lock();
aen = mbcp->mbox_out[1] >> 16;
timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
}
break;
}
- rtnl_unlock();
}
void ql_mpi_work(struct work_struct *work)
struct mbox_params *mbcp = &mbc;
int err = 0;
- rtnl_lock();
+ mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
- rtnl_unlock();
+ mutex_unlock(&qdev->mpi_mutex);
ql_enable_completion_interrupt(qdev, 0);
}
mdio_write(ioaddr, MII_BMCR, val & 0xffff);
}
-static void rtl8169_check_link_status(struct net_device *dev,
+static void __rtl8169_check_link_status(struct net_device *dev,
struct rtl8169_private *tp,
- void __iomem *ioaddr)
+ void __iomem *ioaddr,
+ bool pm)
{
unsigned long flags;
spin_lock_irqsave(&tp->lock, flags);
if (tp->link_ok(ioaddr)) {
/* This is to cancel a scheduled suspend if there's one. */
- pm_request_resume(&tp->pci_dev->dev);
+ if (pm)
+ pm_request_resume(&tp->pci_dev->dev);
netif_carrier_on(dev);
netif_info(tp, ifup, dev, "link up\n");
} else {
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
- pm_schedule_suspend(&tp->pci_dev->dev, 100);
+ if (pm)
+ pm_schedule_suspend(&tp->pci_dev->dev, 100);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
+static void rtl8169_check_link_status(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ __rtl8169_check_link_status(dev, tp, ioaddr, false);
+}
+
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
u32 status = opts1 & RxProtoMask;
if (((status == RxProtoTCP) && !(opts1 & TCPFail)) ||
- ((status == RxProtoUDP) && !(opts1 & UDPFail)) ||
- ((status == RxProtoIP) && !(opts1 & IPFail)))
+ ((status == RxProtoUDP) && !(opts1 & UDPFail)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb_checksum_none_assert(skb);
}
if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
+ __rtl8169_check_link_status(dev, tp, ioaddr, true);
/* We need to see the lastest version of tp->intr_mask to
* avoid ignoring an MSI interrupt and having to wait for
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
- if (!tp->TxDescArray)
- return 0;
-
- rtl8169_check_link_status(dev, tp, tp->mmio_addr);
- return -EBUSY;
+ return tp->TxDescArray ? -EBUSY : 0;
}
static const struct dev_pm_ops rtl8169_pm_ops = {
static void efx_remove_channels(struct efx_nic *efx);
static void efx_remove_port(struct efx_nic *efx);
+static void efx_init_napi(struct efx_nic *efx);
static void efx_fini_napi(struct efx_nic *efx);
+static void efx_fini_napi_channel(struct efx_channel *channel);
static void efx_fini_struct(struct efx_nic *efx);
static void efx_start_all(struct efx_nic *efx);
static void efx_stop_all(struct efx_nic *efx);
/* Disable interrupts and wait for ISRs to complete */
efx_nic_disable_interrupts(efx);
- if (efx->legacy_irq)
+ if (efx->legacy_irq) {
synchronize_irq(efx->legacy_irq);
+ efx->legacy_irq_enabled = false;
+ }
if (channel->irq)
synchronize_irq(channel->irq);
efx_channel_processed(channel);
napi_enable(&channel->napi_str);
+ if (efx->legacy_irq)
+ efx->legacy_irq_enabled = true;
efx_nic_enable_interrupts(efx);
}
*channel = *old_channel;
+ channel->napi_dev = NULL;
memset(&channel->eventq, 0, sizeof(channel->eventq));
rx_queue = &channel->rx_queue;
if (rc)
goto rollback;
+ efx_init_napi(efx);
+
/* Destroy old channels */
- for (i = 0; i < efx->n_channels; i++)
+ for (i = 0; i < efx->n_channels; i++) {
+ efx_fini_napi_channel(other_channel[i]);
efx_remove_channel(other_channel[i]);
+ }
out:
/* Free unused channel structures */
for (i = 0; i < efx->n_channels; i++)
efx_start_channel(channel);
}
+ if (efx->legacy_irq)
+ efx->legacy_irq_enabled = true;
efx_nic_enable_interrupts(efx);
/* Switch to event based MCDI completions after enabling interrupts.
/* Disable interrupts and wait for ISR to complete */
efx_nic_disable_interrupts(efx);
- if (efx->legacy_irq)
+ if (efx->legacy_irq) {
synchronize_irq(efx->legacy_irq);
+ efx->legacy_irq_enabled = false;
+ }
efx_for_each_channel(channel, efx) {
if (channel->irq)
synchronize_irq(channel->irq);
*
**************************************************************************/
-static int efx_init_napi(struct efx_nic *efx)
+static void efx_init_napi(struct efx_nic *efx)
{
struct efx_channel *channel;
netif_napi_add(channel->napi_dev, &channel->napi_str,
efx_poll, napi_weight);
}
- return 0;
+}
+
+static void efx_fini_napi_channel(struct efx_channel *channel)
+{
+ if (channel->napi_dev)
+ netif_napi_del(&channel->napi_str);
+ channel->napi_dev = NULL;
}
static void efx_fini_napi(struct efx_nic *efx)
{
struct efx_channel *channel;
- efx_for_each_channel(channel, efx) {
- if (channel->napi_dev)
- netif_napi_del(&channel->napi_str);
- channel->napi_dev = NULL;
- }
+ efx_for_each_channel(channel, efx)
+ efx_fini_napi_channel(channel);
}
/**************************************************************************
if (rc)
goto fail1;
- rc = efx_init_napi(efx);
- if (rc)
- goto fail2;
+ efx_init_napi(efx);
rc = efx->type->init(efx);
if (rc) {
efx->type->fini(efx);
fail3:
efx_fini_napi(efx);
- fail2:
efx_remove_all(efx);
fail1:
return rc;
* @pci_dev: The PCI device
* @type: Controller type attributes
* @legacy_irq: IRQ number
+ * @legacy_irq_enabled: Are IRQs enabled on NIC (INT_EN_KER register)?
* @workqueue: Workqueue for port reconfigures and the HW monitor.
* Work items do not hold and must not acquire RTNL.
* @workqueue_name: Name of workqueue
struct pci_dev *pci_dev;
const struct efx_nic_type *type;
int legacy_irq;
+ bool legacy_irq_enabled;
struct workqueue_struct *workqueue;
char workqueue_name[16];
struct work_struct reset_work;
u32 queues;
int syserr;
+ /* Could this be ours? If interrupts are disabled then the
+ * channel state may not be valid.
+ */
+ if (!efx->legacy_irq_enabled)
+ return result;
+
/* Read the ISR which also ACKs the interrupts */
efx_readd(efx, ®, FR_BZ_INT_ISR0);
queues = EFX_EXTRACT_DWORD(reg, 0, 31);
bp->SharedMemAddr = pci_alloc_consistent(&bp->pdev,
bp->SharedMemSize,
&bp->SharedMemDMA);
- if (!bp->SharedMemSize) {
+ if (!bp->SharedMemAddr) {
printk("could not allocate mem for ");
printk("hardware module: %ld byte\n",
bp->SharedMemSize);
* This SUCKS.
* We need a much better method to determine if dma_addr_t is 64-bit.
*/
-#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT))
+#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || (defined(CONFIG_MIPS) && ((defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || defined(CONFIG_64BIT))) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT))
/* 64-bit dma_addr_t */
#define ADDR_64BITS /* This chip uses 64 bit addresses. */
#define netdrv_addr_t __le64
pr_warning("\tno valid MAC address;"
"please, use ifconfig or nwhwconfig!\n");
+ spin_lock_init(&priv->lock);
+
ret = register_netdev(dev);
if (ret) {
pr_err("%s: ERROR %i registering the device\n",
dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
(dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
- spin_lock_init(&priv->lock);
-
return ret;
}
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+ struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz + 2);
np->rx_skbuff[i] = skb;
if (skb == NULL)
break;
struct sk_buff *skb;
entry = np->dirty_rx % RX_RING_SIZE;
if (np->rx_skbuff[entry] == NULL) {
- skb = dev_alloc_skb(np->rx_buf_sz);
+ skb = dev_alloc_skb(np->rx_buf_sz + 2);
np->rx_skbuff[entry] = skb;
if (skb == NULL)
break; /* Better luck next round. */
ENTER;
master = READ_REG(priv, regINIT_SEMAPHORE);
if (!READ_REG(priv, regINIT_STATUS) && master) {
- rc = request_firmware(&fw, "tehuti/firmware.bin", &priv->pdev->dev);
+ rc = request_firmware(&fw, "tehuti/bdx.bin", &priv->pdev->dev);
if (rc)
goto out;
bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size);
MODULE_LICENSE("GPL");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(BDX_DRV_DESC);
-MODULE_FIRMWARE("tehuti/firmware.bin");
+MODULE_FIRMWARE("tehuti/bdx.bin");
cnt = pci_read_vpd(tp->pdev, pos,
TG3_NVM_VPD_LEN - pos,
&vpd_data[pos]);
- if (cnt == -ETIMEDOUT || -EINTR)
+ if (cnt == -ETIMEDOUT || cnt == -EINTR)
cnt = 0;
else if (cnt < 0)
goto out_not_found;
--- /dev/null
+#
+# Makefile for the TILE on-chip networking support.
+#
+
+obj-$(CONFIG_TILE_NET) += tile_net.o
+ifdef CONFIG_TILEGX
+tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+else
+tile_net-objs := tilepro.o
+endif
--- /dev/null
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h> /* printk() */
+#include <linux/slab.h> /* kmalloc() */
+#include <linux/errno.h> /* error codes */
+#include <linux/types.h> /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/netdevice.h> /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+
+#include <hv/drv_xgbe_intf.h>
+#include <hv/drv_xgbe_impl.h>
+#include <hv/hypervisor.h>
+#include <hv/netio_intf.h>
+
+/* For TSO */
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+
+/* There is no singlethread_cpu, so schedule work on the current cpu. */
+#define singlethread_cpu -1
+
+
+/*
+ * First, "tile_net_init_module()" initializes all four "devices" which
+ * can be used by linux.
+ *
+ * Then, "ifconfig DEVICE up" calls "tile_net_open()", which analyzes
+ * the network cpus, then uses "tile_net_open_aux()" to initialize
+ * LIPP/LEPP, and then uses "tile_net_open_inner()" to register all
+ * the tiles, provide buffers to LIPP, allow ingress to start, and
+ * turn on hypervisor interrupt handling (and NAPI) on all tiles.
+ *
+ * If registration fails due to the link being down, then "retry_work"
+ * is used to keep calling "tile_net_open_inner()" until it succeeds.
+ *
+ * If "ifconfig DEVICE down" is called, it uses "tile_net_stop()" to
+ * stop egress, drain the LIPP buffers, unregister all the tiles, stop
+ * LIPP/LEPP, and wipe the LEPP queue.
+ *
+ * We start out with the ingress interrupt enabled on each CPU. When
+ * this interrupt fires, we disable it, and call "napi_schedule()".
+ * This will cause "tile_net_poll()" to be called, which will pull
+ * packets from the netio queue, filtering them out, or passing them
+ * to "netif_receive_skb()". If our budget is exhausted, we will
+ * return, knowing we will be called again later. Otherwise, we
+ * reenable the ingress interrupt, and call "napi_complete()".
+ *
+ *
+ * NOTE: The use of "native_driver" ensures that EPP exists, and that
+ * "epp_sendv" is legal, and that "LIPP" is being used.
+ *
+ * NOTE: Failing to free completions for an arbitrarily long time
+ * (which is defined to be illegal) does in fact cause bizarre
+ * problems. The "egress_timer" helps prevent this from happening.
+ *
+ * NOTE: The egress code can be interrupted by the interrupt handler.
+ */
+
+
+/* HACK: Allow use of "jumbo" packets. */
+/* This should be 1500 if "jumbo" is not set in LIPP. */
+/* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */
+/* ISSUE: This has not been thoroughly tested (except at 1500). */
+#define TILE_NET_MTU 1500
+
+/* HACK: Define to support GSO. */
+/* ISSUE: This may actually hurt performance of the TCP blaster. */
+/* #define TILE_NET_GSO */
+
+/* Define this to collapse "duplicate" acks. */
+/* #define IGNORE_DUP_ACKS */
+
+/* HACK: Define this to verify incoming packets. */
+/* #define TILE_NET_VERIFY_INGRESS */
+
+/* Use 3000 to enable the Linux Traffic Control (QoS) layer, else 0. */
+#define TILE_NET_TX_QUEUE_LEN 0
+
+/* Define to dump packets (prints out the whole packet on tx and rx). */
+/* #define TILE_NET_DUMP_PACKETS */
+
+/* Define to enable debug spew (all PDEBUG's are enabled). */
+/* #define TILE_NET_DEBUG */
+
+
+/* Define to activate paranoia checks. */
+/* #define TILE_NET_PARANOIA */
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* Default retry interval for bringing up the NetIO interface, in jiffies. */
+#define TILE_NET_RETRY_INTERVAL (5 * HZ)
+
+/* Number of ports (xgbe0, xgbe1, gbe0, gbe1). */
+#define TILE_NET_DEVS 4
+
+
+
+/* Paranoia. */
+#if NET_IP_ALIGN != LIPP_PACKET_PADDING
+#error "NET_IP_ALIGN must match LIPP_PACKET_PADDING."
+#endif
+
+
+/* Debug print. */
+#ifdef TILE_NET_DEBUG
+#define PDEBUG(fmt, args...) net_printk(fmt, ## args)
+#else
+#define PDEBUG(fmt, args...)
+#endif
+
+
+MODULE_AUTHOR("Tilera");
+MODULE_LICENSE("GPL");
+
+
+#define IS_MULTICAST(mac_addr) \
+ (((u8 *)(mac_addr))[0] & 0x01)
+
+#define IS_BROADCAST(mac_addr) \
+ (((u16 *)(mac_addr))[0] == 0xffff)
+
+
+/*
+ * Queue of incoming packets for a specific cpu and device.
+ *
+ * Includes a pointer to the "system" data, and the actual "user" data.
+ */
+struct tile_netio_queue {
+ netio_queue_impl_t *__system_part;
+ netio_queue_user_impl_t __user_part;
+
+};
+
+
+/*
+ * Statistics counters for a specific cpu and device.
+ */
+struct tile_net_stats_t {
+ u32 rx_packets;
+ u32 rx_bytes;
+ u32 tx_packets;
+ u32 tx_bytes;
+};
+
+
+/*
+ * Info for a specific cpu and device.
+ *
+ * ISSUE: There is a "dev" pointer in "napi" as well.
+ */
+struct tile_net_cpu {
+ /* The NAPI struct. */
+ struct napi_struct napi;
+ /* Packet queue. */
+ struct tile_netio_queue queue;
+ /* Statistics. */
+ struct tile_net_stats_t stats;
+ /* ISSUE: Is this needed? */
+ bool napi_enabled;
+ /* True if this tile has succcessfully registered with the IPP. */
+ bool registered;
+ /* True if the link was down last time we tried to register. */
+ bool link_down;
+ /* True if "egress_timer" is scheduled. */
+ bool egress_timer_scheduled;
+ /* Number of small sk_buffs which must still be provided. */
+ unsigned int num_needed_small_buffers;
+ /* Number of large sk_buffs which must still be provided. */
+ unsigned int num_needed_large_buffers;
+ /* A timer for handling egress completions. */
+ struct timer_list egress_timer;
+};
+
+
+/*
+ * Info for a specific device.
+ */
+struct tile_net_priv {
+ /* Our network device. */
+ struct net_device *dev;
+ /* The actual egress queue. */
+ lepp_queue_t *epp_queue;
+ /* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */
+ spinlock_t cmd_lock;
+ /* Protects "epp_queue->comp_head". */
+ spinlock_t comp_lock;
+ /* The hypervisor handle for this interface. */
+ int hv_devhdl;
+ /* The intr bit mask that IDs this device. */
+ u32 intr_id;
+ /* True iff "tile_net_open_aux()" has succeeded. */
+ int partly_opened;
+ /* True iff "tile_net_open_inner()" has succeeded. */
+ int fully_opened;
+ /* Effective network cpus. */
+ struct cpumask network_cpus_map;
+ /* Number of network cpus. */
+ int network_cpus_count;
+ /* Credits per network cpu. */
+ int network_cpus_credits;
+ /* Network stats. */
+ struct net_device_stats stats;
+ /* For NetIO bringup retries. */
+ struct delayed_work retry_work;
+ /* Quick access to per cpu data. */
+ struct tile_net_cpu *cpu[NR_CPUS];
+};
+
+
+/*
+ * The actual devices (xgbe0, xgbe1, gbe0, gbe1).
+ */
+static struct net_device *tile_net_devs[TILE_NET_DEVS];
+
+/*
+ * The "tile_net_cpu" structures for each device.
+ */
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe1);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe1);
+
+
+/*
+ * True if "network_cpus" was specified.
+ */
+static bool network_cpus_used;
+
+/*
+ * The actual cpus in "network_cpus".
+ */
+static struct cpumask network_cpus_map;
+
+
+
+#ifdef TILE_NET_DEBUG
+/*
+ * printk with extra stuff.
+ *
+ * We print the CPU we're running in brackets.
+ */
+static void net_printk(char *fmt, ...)
+{
+ int i;
+ int len;
+ va_list args;
+ static char buf[256];
+
+ len = sprintf(buf, "tile_net[%2.2d]: ", smp_processor_id());
+ va_start(args, fmt);
+ i = vscnprintf(buf + len, sizeof(buf) - len - 1, fmt, args);
+ va_end(args);
+ buf[255] = '\0';
+ pr_notice(buf);
+}
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+/*
+ * Dump a packet.
+ */
+static void dump_packet(unsigned char *data, unsigned long length, char *s)
+{
+ unsigned long i;
+ static unsigned int count;
+
+ pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n",
+ data, length, s, count++);
+
+ pr_info("\n");
+
+ for (i = 0; i < length; i++) {
+ if ((i & 0xf) == 0)
+ sprintf(buf, "%8.8lx:", i);
+ sprintf(buf + strlen(buf), " %2.2x", data[i]);
+ if ((i & 0xf) == 0xf || i == length - 1)
+ pr_info("%s\n", buf);
+ }
+}
+#endif
+
+
+/*
+ * Provide support for the __netio_fastio1() swint
+ * (see <hv/drv_xgbe_intf.h> for how it is used).
+ *
+ * The fastio swint2 call may clobber all the caller-saved registers.
+ * It rarely clobbers memory, but we allow for the possibility in
+ * the signature just to be on the safe side.
+ *
+ * Also, gcc doesn't seem to allow an input operand to be
+ * clobbered, so we fake it with dummy outputs.
+ *
+ * This function can't be static because of the way it is declared
+ * in the netio header.
+ */
+inline int __netio_fastio1(u32 fastio_index, u32 arg0)
+{
+ long result, clobber_r1, clobber_r10;
+ asm volatile("swint2"
+ : "=R00" (result),
+ "=R01" (clobber_r1), "=R10" (clobber_r10)
+ : "R10" (fastio_index), "R01" (arg0)
+ : "memory", "r2", "r3", "r4",
+ "r5", "r6", "r7", "r8", "r9",
+ "r11", "r12", "r13", "r14",
+ "r15", "r16", "r17", "r18", "r19",
+ "r20", "r21", "r22", "r23", "r24",
+ "r25", "r26", "r27", "r28", "r29");
+ return result;
+}
+
+
+/*
+ * Provide a linux buffer to LIPP.
+ */
+static void tile_net_provide_linux_buffer(struct tile_net_cpu *info,
+ void *va, bool small)
+{
+ struct tile_netio_queue *queue = &info->queue;
+
+ /* Convert "va" and "small" to "linux_buffer_t". */
+ unsigned int buffer = ((unsigned int)(__pa(va) >> 7) << 1) + small;
+
+ __netio_fastio_free_buffer(queue->__user_part.__fastio_index, buffer);
+}
+
+
+/*
+ * Provide a linux buffer for LIPP.
+ */
+static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info,
+ bool small)
+{
+ /* ISSUE: What should we use here? */
+ unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100;
+
+ /* Round up to ensure to avoid "false sharing" with last cache line. */
+ unsigned int buffer_size =
+ (((small ? LIPP_SMALL_PACKET_SIZE : large_size) +
+ CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE());
+
+ /*
+ * ISSUE: Since CPAs are 38 bits, and we can only encode the
+ * high 31 bits in a "linux_buffer_t", the low 7 bits must be
+ * zero, and thus, we must align the actual "va" mod 128.
+ */
+ const unsigned long align = 128;
+
+ struct sk_buff *skb;
+ void *va;
+
+ struct sk_buff **skb_ptr;
+
+ /* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */
+ /* and also "reserves" that many bytes. */
+ /* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */
+ int len = sizeof(*skb_ptr) + align + buffer_size;
+
+ while (1) {
+
+ /* Allocate (or fail). */
+ skb = dev_alloc_skb(len);
+ if (skb == NULL)
+ return false;
+
+ /* Make room for a back-pointer to 'skb'. */
+ skb_reserve(skb, sizeof(*skb_ptr));
+
+ /* Make sure we are aligned. */
+ skb_reserve(skb, -(long)skb->data & (align - 1));
+
+ /* This address is given to IPP. */
+ va = skb->data;
+
+ if (small)
+ break;
+
+ /* ISSUE: This has never been observed! */
+ /* Large buffers must not span a huge page. */
+ if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0)
+ break;
+ pr_err("Leaking unaligned linux buffer at %p.\n", va);
+ }
+
+ /* Skip two bytes to satisfy LIPP assumptions. */
+ /* Note that this aligns IP on a 16 byte boundary. */
+ /* ISSUE: Do this when the packet arrives? */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* Save a back-pointer to 'skb'. */
+ skb_ptr = va - sizeof(*skb_ptr);
+ *skb_ptr = skb;
+
+ /* Invalidate the packet buffer. */
+ if (!hash_default)
+ __inv_buffer(skb->data, buffer_size);
+
+ /* Make sure "skb_ptr" has been flushed. */
+ __insn_mf();
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (hash_default) {
+ HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va);
+ if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+ panic("Non-coherent ingress buffer!");
+ }
+#endif
+#endif
+
+ /* Provide the new buffer. */
+ tile_net_provide_linux_buffer(info, va, small);
+
+ return true;
+}
+
+
+/*
+ * Provide linux buffers for LIPP.
+ */
+static void tile_net_provide_needed_buffers(struct tile_net_cpu *info)
+{
+ while (info->num_needed_small_buffers != 0) {
+ if (!tile_net_provide_needed_buffer(info, true))
+ goto oops;
+ info->num_needed_small_buffers--;
+ }
+
+ while (info->num_needed_large_buffers != 0) {
+ if (!tile_net_provide_needed_buffer(info, false))
+ goto oops;
+ info->num_needed_large_buffers--;
+ }
+
+ return;
+
+oops:
+
+ /* Add a description to the page allocation failure dump. */
+ pr_notice("Could not provide a linux buffer to LIPP.\n");
+}
+
+
+/*
+ * Grab some LEPP completions, and store them in "comps", of size
+ * "comps_size", and return the number of completions which were
+ * stored, so the caller can free them.
+ *
+ * If "pending" is not NULL, it will be set to true if there might
+ * still be some pending completions caused by this tile, else false.
+ */
+static unsigned int tile_net_lepp_grab_comps(struct net_device *dev,
+ struct sk_buff *comps[],
+ unsigned int comps_size,
+ bool *pending)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ lepp_queue_t *eq = priv->epp_queue;
+
+ unsigned int n = 0;
+
+ unsigned int comp_head;
+ unsigned int comp_busy;
+ unsigned int comp_tail;
+
+ spin_lock(&priv->comp_lock);
+
+ comp_head = eq->comp_head;
+ comp_busy = eq->comp_busy;
+ comp_tail = eq->comp_tail;
+
+ while (comp_head != comp_busy && n < comps_size) {
+ comps[n++] = eq->comps[comp_head];
+ LEPP_QINC(comp_head);
+ }
+
+ if (pending != NULL)
+ *pending = (comp_head != comp_tail);
+
+ eq->comp_head = comp_head;
+
+ spin_unlock(&priv->comp_lock);
+
+ return n;
+}
+
+
+/*
+ * Make sure the egress timer is scheduled.
+ *
+ * Note that we use "schedule if not scheduled" logic instead of the more
+ * obvious "reschedule" logic, because "reschedule" is fairly expensive.
+ */
+static void tile_net_schedule_egress_timer(struct tile_net_cpu *info)
+{
+ if (!info->egress_timer_scheduled) {
+ mod_timer_pinned(&info->egress_timer, jiffies + 1);
+ info->egress_timer_scheduled = true;
+ }
+}
+
+
+/*
+ * The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected (on behalf of any tile).
+ *
+ * ISSUE: Realistically, will the timer ever stop scheduling itself?
+ *
+ * ISSUE: This timer is almost never actually needed, so just use a global
+ * timer that can run on any tile.
+ *
+ * ISSUE: Maybe instead track number of expected completions, and free
+ * only that many, resetting to zero if "pending" is ever false.
+ */
+static void tile_net_handle_egress_timer(unsigned long arg)
+{
+ struct tile_net_cpu *info = (struct tile_net_cpu *)arg;
+ struct net_device *dev = info->napi.dev;
+
+ struct sk_buff *olds[32];
+ unsigned int wanted = 32;
+ unsigned int i, nolds = 0;
+ bool pending;
+
+ /* The timer is no longer scheduled. */
+ info->egress_timer_scheduled = false;
+
+ nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending);
+
+ for (i = 0; i < nolds; i++)
+ kfree_skb(olds[i]);
+
+ /* Reschedule timer if needed. */
+ if (pending)
+ tile_net_schedule_egress_timer(info);
+}
+
+
+#ifdef IGNORE_DUP_ACKS
+
+/*
+ * Help detect "duplicate" ACKs. These are sequential packets (for a
+ * given flow) which are exactly 66 bytes long, sharing everything but
+ * ID=2@0x12, Hsum=2@0x18, Ack=4@0x2a, WinSize=2@0x30, Csum=2@0x32,
+ * Tstamps=10@0x38. The ID's are +1, the Hsum's are -1, the Ack's are
+ * +N, and the Tstamps are usually identical.
+ *
+ * NOTE: Apparently truly duplicate acks (with identical "ack" values),
+ * should not be collapsed, as they are used for some kind of flow control.
+ */
+static bool is_dup_ack(char *s1, char *s2, unsigned int len)
+{
+ int i;
+
+ unsigned long long ignorable = 0;
+
+ /* Identification. */
+ ignorable |= (1ULL << 0x12);
+ ignorable |= (1ULL << 0x13);
+
+ /* Header checksum. */
+ ignorable |= (1ULL << 0x18);
+ ignorable |= (1ULL << 0x19);
+
+ /* ACK. */
+ ignorable |= (1ULL << 0x2a);
+ ignorable |= (1ULL << 0x2b);
+ ignorable |= (1ULL << 0x2c);
+ ignorable |= (1ULL << 0x2d);
+
+ /* WinSize. */
+ ignorable |= (1ULL << 0x30);
+ ignorable |= (1ULL << 0x31);
+
+ /* Checksum. */
+ ignorable |= (1ULL << 0x32);
+ ignorable |= (1ULL << 0x33);
+
+ for (i = 0; i < len; i++, ignorable >>= 1) {
+
+ if ((ignorable & 1) || (s1[i] == s2[i]))
+ continue;
+
+#ifdef TILE_NET_DEBUG
+ /* HACK: Mention non-timestamp diffs. */
+ if (i < 0x38 && i != 0x2f &&
+ net_ratelimit())
+ pr_info("Diff at 0x%x\n", i);
+#endif
+
+ return false;
+ }
+
+#ifdef TILE_NET_NO_SUPPRESS_DUP_ACKS
+ /* HACK: Do not suppress truly duplicate ACKs. */
+ /* ISSUE: Is this actually necessary or helpful? */
+ if (s1[0x2a] == s2[0x2a] &&
+ s1[0x2b] == s2[0x2b] &&
+ s1[0x2c] == s2[0x2c] &&
+ s1[0x2d] == s2[0x2d]) {
+ return false;
+ }
+#endif
+
+ return true;
+}
+
+#endif
+
+
+
+/*
+ * Like "tile_net_handle_packets()", but just discard packets.
+ */
+static void tile_net_discard_packets(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+ struct tile_netio_queue *queue = &info->queue;
+ netio_queue_impl_t *qsp = queue->__system_part;
+ netio_queue_user_impl_t *qup = &queue->__user_part;
+
+ while (qup->__packet_receive_read !=
+ qsp->__packet_receive_queue.__packet_write) {
+
+ int index = qup->__packet_receive_read;
+
+ int index2_aux = index + sizeof(netio_pkt_t);
+ int index2 =
+ ((index2_aux ==
+ qsp->__packet_receive_queue.__last_packet_plus_one) ?
+ 0 : index2_aux);
+
+ netio_pkt_t *pkt = (netio_pkt_t *)
+ ((unsigned long) &qsp[1] + index);
+
+ /* Extract the "linux_buffer_t". */
+ unsigned int buffer = pkt->__packet.word;
+
+ /* Convert "linux_buffer_t" to "va". */
+ void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+ /* Acquire the associated "skb". */
+ struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+ struct sk_buff *skb = *skb_ptr;
+
+ kfree_skb(skb);
+
+ /* Consume this packet. */
+ qup->__packet_receive_read = index2;
+ }
+}
+
+
+/*
+ * Handle the next packet. Return true if "processed", false if "filtered".
+ */
+static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
+{
+ struct net_device *dev = info->napi.dev;
+
+ struct tile_netio_queue *queue = &info->queue;
+ netio_queue_impl_t *qsp = queue->__system_part;
+ netio_queue_user_impl_t *qup = &queue->__user_part;
+ struct tile_net_stats_t *stats = &info->stats;
+
+ int filter;
+
+ int index2_aux = index + sizeof(netio_pkt_t);
+ int index2 =
+ ((index2_aux ==
+ qsp->__packet_receive_queue.__last_packet_plus_one) ?
+ 0 : index2_aux);
+
+ netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index);
+
+ netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt);
+
+ /* Extract the packet size. */
+ unsigned long len =
+ (NETIO_PKT_CUSTOM_LENGTH(pkt) +
+ NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+ /* Extract the "linux_buffer_t". */
+ unsigned int buffer = pkt->__packet.word;
+
+ /* Extract "small" (vs "large"). */
+ bool small = ((buffer & 1) != 0);
+
+ /* Convert "linux_buffer_t" to "va". */
+ void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+ /* Extract the packet data pointer. */
+ /* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+ unsigned char *buf = va + NET_IP_ALIGN;
+
+#ifdef IGNORE_DUP_ACKS
+
+ static int other;
+ static int final;
+ static int keep;
+ static int skip;
+
+#endif
+
+ /* Invalidate the packet buffer. */
+ if (!hash_default)
+ __inv_buffer(buf, len);
+
+ /* ISSUE: Is this needed? */
+ dev->last_rx = jiffies;
+
+#ifdef TILE_NET_DUMP_PACKETS
+ dump_packet(buf, len, "rx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+#ifdef TILE_NET_VERIFY_INGRESS
+ if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) &&
+ NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) {
+ /*
+ * FIXME: This complains about UDP packets
+ * with a "zero" checksum (bug 6624).
+ */
+#ifdef TILE_NET_PANIC_ON_BAD
+ dump_packet(buf, len, "rx");
+ panic("Bad L4 checksum.");
+#else
+ pr_warning("Bad L4 checksum on %d byte packet.\n", len);
+#endif
+ }
+ if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) &&
+ NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) {
+ dump_packet(buf, len, "rx");
+ panic("Bad L3 checksum.");
+ }
+ switch (NETIO_PKT_STATUS_M(metadata, pkt)) {
+ case NETIO_PKT_STATUS_OVERSIZE:
+ if (len >= 64) {
+ dump_packet(buf, len, "rx");
+ panic("Unexpected OVERSIZE.");
+ }
+ break;
+ case NETIO_PKT_STATUS_BAD:
+#ifdef TILE_NET_PANIC_ON_BAD
+ dump_packet(buf, len, "rx");
+ panic("Unexpected BAD packet.");
+#else
+ pr_warning("Unexpected BAD %d byte packet.\n", len);
+#endif
+ }
+#endif
+
+ filter = 0;
+
+ if (!(dev->flags & IFF_UP)) {
+ /* Filter packets received before we're up. */
+ filter = 1;
+ } else if (!(dev->flags & IFF_PROMISC)) {
+ /*
+ * FIXME: Implement HW multicast filter.
+ */
+ if (!IS_MULTICAST(buf) && !IS_BROADCAST(buf)) {
+ /* Filter packets not for our address. */
+ const u8 *mine = dev->dev_addr;
+ filter = compare_ether_addr(mine, buf);
+ }
+ }
+
+#ifdef IGNORE_DUP_ACKS
+
+ if (len != 66) {
+ /* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */
+
+ other++;
+
+ } else if (index2 ==
+ qsp->__packet_receive_queue.__packet_write) {
+
+ final++;
+
+ } else {
+
+ netio_pkt_t *pkt2 = (netio_pkt_t *)
+ ((unsigned long) &qsp[1] + index2);
+
+ netio_pkt_metadata_t *metadata2 =
+ NETIO_PKT_METADATA(pkt2);
+
+ /* Extract the packet size. */
+ unsigned long len2 =
+ (NETIO_PKT_CUSTOM_LENGTH(pkt2) +
+ NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+ if (len2 == 66 &&
+ NETIO_PKT_FLOW_HASH_M(metadata, pkt) ==
+ NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) {
+
+ /* Extract the "linux_buffer_t". */
+ unsigned int buffer2 = pkt2->__packet.word;
+
+ /* Convert "linux_buffer_t" to "va". */
+ void *va2 =
+ __va((phys_addr_t)(buffer2 >> 1) << 7);
+
+ /* Extract the packet data pointer. */
+ /* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+ unsigned char *buf2 = va2 + NET_IP_ALIGN;
+
+ /* Invalidate the packet buffer. */
+ if (!hash_default)
+ __inv_buffer(buf2, len2);
+
+ if (is_dup_ack(buf, buf2, len)) {
+ skip++;
+ filter = 1;
+ } else {
+ keep++;
+ }
+ }
+ }
+
+ if (net_ratelimit())
+ pr_info("Other %d Final %d Keep %d Skip %d.\n",
+ other, final, keep, skip);
+
+#endif
+
+ if (filter) {
+
+ /* ISSUE: Update "drop" statistics? */
+
+ tile_net_provide_linux_buffer(info, va, small);
+
+ } else {
+
+ /* Acquire the associated "skb". */
+ struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+ struct sk_buff *skb = *skb_ptr;
+
+ /* Paranoia. */
+ if (skb->data != buf)
+ panic("Corrupt linux buffer from LIPP! "
+ "VA=%p, skb=%p, skb->data=%p\n",
+ va, skb, skb->data);
+
+ /* Encode the actual packet length. */
+ skb_put(skb, len);
+
+ /* NOTE: This call also sets "skb->dev = dev". */
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* ISSUE: Discard corrupt packets? */
+ /* ISSUE: Discard packets with bad checksums? */
+
+ /* Avoid recomputing TCP/UDP checksums. */
+ if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ netif_receive_skb(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += len;
+
+ if (small)
+ info->num_needed_small_buffers++;
+ else
+ info->num_needed_large_buffers++;
+ }
+
+ /* Return four credits after every fourth packet. */
+ if (--qup->__receive_credit_remaining == 0) {
+ u32 interval = qup->__receive_credit_interval;
+ qup->__receive_credit_remaining = interval;
+ __netio_fastio_return_credits(qup->__fastio_index, interval);
+ }
+
+ /* Consume this packet. */
+ qup->__packet_receive_read = index2;
+
+ return !filter;
+}
+
+
+/*
+ * Handle some packets for the given device on the current CPU.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+ struct net_device *dev = napi->dev;
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+ struct tile_netio_queue *queue = &info->queue;
+ netio_queue_impl_t *qsp = queue->__system_part;
+ netio_queue_user_impl_t *qup = &queue->__user_part;
+
+ unsigned int work = 0;
+
+ while (1) {
+ int index = qup->__packet_receive_read;
+ if (index == qsp->__packet_receive_queue.__packet_write)
+ break;
+
+ if (tile_net_poll_aux(info, index)) {
+ if (++work >= budget)
+ goto done;
+ }
+ }
+
+ napi_complete(&info->napi);
+
+ /* Re-enable hypervisor interrupts. */
+ enable_percpu_irq(priv->intr_id);
+
+ /* HACK: Avoid the "rotting packet" problem. */
+ if (qup->__packet_receive_read !=
+ qsp->__packet_receive_queue.__packet_write)
+ napi_schedule(&info->napi);
+
+ /* ISSUE: Handle completions? */
+
+done:
+
+ tile_net_provide_needed_buffers(info);
+
+ return work;
+}
+
+
+/*
+ * Handle an ingress interrupt for the given device on the current cpu.
+ */
+static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr)
+{
+ struct net_device *dev = (struct net_device *)dev_ptr;
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+ /* Disable hypervisor interrupt. */
+ disable_percpu_irq(priv->intr_id);
+
+ napi_schedule(&info->napi);
+
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * One time initialization per interface.
+ */
+static int tile_net_open_aux(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ int ret;
+ int dummy;
+ unsigned int epp_lotar;
+
+ /*
+ * Find out where EPP memory should be homed.
+ */
+ ret = hv_dev_pread(priv->hv_devhdl, 0,
+ (HV_VirtAddr)&epp_lotar, sizeof(epp_lotar),
+ NETIO_EPP_SHM_OFF);
+ if (ret < 0) {
+ pr_err("could not read epp_shm_queue lotar.\n");
+ return -EIO;
+ }
+
+ /*
+ * Home the page on the EPP.
+ */
+ {
+ int epp_home = hv_lotar_to_cpu(epp_lotar);
+ struct page *page = virt_to_page(priv->epp_queue);
+ homecache_change_page_home(page, 0, epp_home);
+ }
+
+ /*
+ * Register the EPP shared memory queue.
+ */
+ {
+ netio_ipp_address_t ea = {
+ .va = 0,
+ .pa = __pa(priv->epp_queue),
+ .pte = hv_pte(0),
+ .size = PAGE_SIZE,
+ };
+ ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar);
+ ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3);
+ ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+ (HV_VirtAddr)&ea,
+ sizeof(ea),
+ NETIO_EPP_SHM_OFF);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ /*
+ * Start LIPP/LEPP.
+ */
+ if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+ sizeof(dummy), NETIO_IPP_START_SHIM_OFF) < 0) {
+ pr_warning("Failed to start LIPP/LEPP.\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Register with hypervisor on each CPU.
+ *
+ * Strangely, this function does important things even if it "fails",
+ * which is especially common if the link is not up yet. Hopefully
+ * these things are all "harmless" if done twice!
+ */
+static void tile_net_register(void *dev_ptr)
+{
+ struct net_device *dev = (struct net_device *)dev_ptr;
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info;
+
+ struct tile_netio_queue *queue;
+
+ /* Only network cpus can receive packets. */
+ int queue_id =
+ cpumask_test_cpu(my_cpu, &priv->network_cpus_map) ? 0 : 255;
+
+ netio_input_config_t config = {
+ .flags = 0,
+ .num_receive_packets = priv->network_cpus_credits,
+ .queue_id = queue_id
+ };
+
+ int ret = 0;
+ netio_queue_impl_t *queuep;
+
+ PDEBUG("tile_net_register(queue_id %d)\n", queue_id);
+
+ if (!strcmp(dev->name, "xgbe0"))
+ info = &__get_cpu_var(hv_xgbe0);
+ else if (!strcmp(dev->name, "xgbe1"))
+ info = &__get_cpu_var(hv_xgbe1);
+ else if (!strcmp(dev->name, "gbe0"))
+ info = &__get_cpu_var(hv_gbe0);
+ else if (!strcmp(dev->name, "gbe1"))
+ info = &__get_cpu_var(hv_gbe1);
+ else
+ BUG();
+
+ /* Initialize the egress timer. */
+ init_timer(&info->egress_timer);
+ info->egress_timer.data = (long)info;
+ info->egress_timer.function = tile_net_handle_egress_timer;
+
+ priv->cpu[my_cpu] = info;
+
+ /*
+ * Register ourselves with the IPP.
+ */
+ ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+ (HV_VirtAddr)&config,
+ sizeof(netio_input_config_t),
+ NETIO_IPP_INPUT_REGISTER_OFF);
+ PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+ ret);
+ if (ret < 0) {
+ printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF"
+ " failure %d\n", ret);
+ info->link_down = (ret == NETIO_LINK_DOWN);
+ return;
+ }
+
+ /*
+ * Get the pointer to our queue's system part.
+ */
+
+ ret = hv_dev_pread(priv->hv_devhdl, 0,
+ (HV_VirtAddr)&queuep,
+ sizeof(netio_queue_impl_t *),
+ NETIO_IPP_INPUT_REGISTER_OFF);
+ PDEBUG("hv_dev_pread(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+ ret);
+ PDEBUG("queuep %p\n", queuep);
+ if (ret <= 0) {
+ /* ISSUE: Shouldn't this be a fatal error? */
+ pr_err("hv_dev_pread NETIO_IPP_INPUT_REGISTER_OFF failure\n");
+ return;
+ }
+
+ queue = &info->queue;
+
+ queue->__system_part = queuep;
+
+ memset(&queue->__user_part, 0, sizeof(netio_queue_user_impl_t));
+
+ /* This is traditionally "config.num_receive_packets / 2". */
+ queue->__user_part.__receive_credit_interval = 4;
+ queue->__user_part.__receive_credit_remaining =
+ queue->__user_part.__receive_credit_interval;
+
+ /*
+ * Get a fastio index from the hypervisor.
+ * ISSUE: Shouldn't this check the result?
+ */
+ ret = hv_dev_pread(priv->hv_devhdl, 0,
+ (HV_VirtAddr)&queue->__user_part.__fastio_index,
+ sizeof(queue->__user_part.__fastio_index),
+ NETIO_IPP_GET_FASTIO_OFF);
+ PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret);
+
+ netif_napi_add(dev, &info->napi, tile_net_poll, 64);
+
+ /* Now we are registered. */
+ info->registered = true;
+}
+
+
+/*
+ * Unregister with hypervisor on each CPU.
+ */
+static void tile_net_unregister(void *dev_ptr)
+{
+ struct net_device *dev = (struct net_device *)dev_ptr;
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+ int ret = 0;
+ int dummy = 0;
+
+ /* Do nothing if never registered. */
+ if (info == NULL)
+ return;
+
+ /* Do nothing if already unregistered. */
+ if (!info->registered)
+ return;
+
+ /*
+ * Unregister ourselves with LIPP.
+ */
+ ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+ sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF);
+ PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n",
+ ret);
+ if (ret < 0) {
+ /* FIXME: Just panic? */
+ pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF"
+ " failure %d\n", ret);
+ }
+
+ /*
+ * Discard all packets still in our NetIO queue. Hopefully,
+ * once the unregister call is complete, there will be no
+ * packets still in flight on the IDN.
+ */
+ tile_net_discard_packets(dev);
+
+ /* Reset state. */
+ info->num_needed_small_buffers = 0;
+ info->num_needed_large_buffers = 0;
+
+ /* Cancel egress timer. */
+ del_timer(&info->egress_timer);
+ info->egress_timer_scheduled = false;
+
+ netif_napi_del(&info->napi);
+
+ /* Now we are unregistered. */
+ info->registered = false;
+}
+
+
+/*
+ * Helper function for "tile_net_stop()".
+ *
+ * Also used to handle registration failure in "tile_net_open_inner()",
+ * when "fully_opened" is known to be false, and the various extra
+ * steps in "tile_net_stop()" are not necessary. ISSUE: It might be
+ * simpler if we could just call "tile_net_stop()" anyway.
+ */
+static void tile_net_stop_aux(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ int dummy = 0;
+
+ /* Unregister all tiles, so LIPP will stop delivering packets. */
+ on_each_cpu(tile_net_unregister, (void *)dev, 1);
+
+ /* Stop LIPP/LEPP. */
+ if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+ sizeof(dummy), NETIO_IPP_STOP_SHIM_OFF) < 0)
+ panic("Failed to stop LIPP/LEPP!\n");
+
+ priv->partly_opened = 0;
+}
+
+
+/*
+ * Disable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_disable_intr(void *dev_ptr)
+{
+ struct net_device *dev = (struct net_device *)dev_ptr;
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+ /* Disable hypervisor interrupt. */
+ disable_percpu_irq(priv->intr_id);
+
+ /* Disable NAPI if needed. */
+ if (info != NULL && info->napi_enabled) {
+ napi_disable(&info->napi);
+ info->napi_enabled = false;
+ }
+}
+
+
+/*
+ * Enable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_enable_intr(void *dev_ptr)
+{
+ struct net_device *dev = (struct net_device *)dev_ptr;
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+ /* Enable hypervisor interrupt. */
+ enable_percpu_irq(priv->intr_id);
+
+ /* Enable NAPI. */
+ napi_enable(&info->napi);
+ info->napi_enabled = true;
+}
+
+
+/*
+ * tile_net_open_inner does most of the work of bringing up the interface.
+ * It's called from tile_net_open(), and also from tile_net_retry_open().
+ * The return value is 0 if the interface was brought up, < 0 if
+ * tile_net_open() should return the return value as an error, and > 0 if
+ * tile_net_open() should return success and schedule a work item to
+ * periodically retry the bringup.
+ */
+static int tile_net_open_inner(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info;
+ struct tile_netio_queue *queue;
+ unsigned int irq;
+ int i;
+
+ /*
+ * First try to register just on the local CPU, and handle any
+ * semi-expected "link down" failure specially. Note that we
+ * do NOT call "tile_net_stop_aux()", unlike below.
+ */
+ tile_net_register(dev);
+ info = priv->cpu[my_cpu];
+ if (!info->registered) {
+ if (info->link_down)
+ return 1;
+ return -EAGAIN;
+ }
+
+ /*
+ * Now register everywhere else. If any registration fails,
+ * even for "link down" (which might not be possible), we
+ * clean up using "tile_net_stop_aux()".
+ */
+ smp_call_function(tile_net_register, (void *)dev, 1);
+ for_each_online_cpu(i) {
+ if (!priv->cpu[i]->registered) {
+ tile_net_stop_aux(dev);
+ return -EAGAIN;
+ }
+ }
+
+ queue = &info->queue;
+
+ /*
+ * Set the device intr bit mask.
+ * The tile_net_register above sets per tile __intr_id.
+ */
+ priv->intr_id = queue->__system_part->__intr_id;
+ BUG_ON(!priv->intr_id);
+
+ /*
+ * Register the device interrupt handler.
+ * The __ffs() function returns the index into the interrupt handler
+ * table from the interrupt bit mask which should have one bit
+ * and one bit only set.
+ */
+ irq = __ffs(priv->intr_id);
+ tile_irq_activate(irq, TILE_IRQ_PERCPU);
+ BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt,
+ 0, dev->name, (void *)dev) != 0);
+
+ /* ISSUE: How could "priv->fully_opened" ever be "true" here? */
+
+ if (!priv->fully_opened) {
+
+ int dummy = 0;
+
+ /* Allocate initial buffers. */
+
+ int max_buffers =
+ priv->network_cpus_count * priv->network_cpus_credits;
+
+ info->num_needed_small_buffers =
+ min(LIPP_SMALL_BUFFERS, max_buffers);
+
+ info->num_needed_large_buffers =
+ min(LIPP_LARGE_BUFFERS, max_buffers);
+
+ tile_net_provide_needed_buffers(info);
+
+ if (info->num_needed_small_buffers != 0 ||
+ info->num_needed_large_buffers != 0)
+ panic("Insufficient memory for buffer stack!");
+
+ /* Start LIPP/LEPP and activate "ingress" at the shim. */
+ if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+ sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0)
+ panic("Failed to activate the LIPP Shim!\n");
+
+ priv->fully_opened = 1;
+ }
+
+ /* On each tile, enable the hypervisor to trigger interrupts. */
+ /* ISSUE: Do this before starting LIPP/LEPP? */
+ on_each_cpu(tile_net_enable_intr, (void *)dev, 1);
+
+ /* Start our transmit queue. */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+
+/*
+ * Called periodically to retry bringing up the NetIO interface,
+ * if it doesn't come up cleanly during tile_net_open().
+ */
+static void tile_net_open_retry(struct work_struct *w)
+{
+ struct delayed_work *dw =
+ container_of(w, struct delayed_work, work);
+
+ struct tile_net_priv *priv =
+ container_of(dw, struct tile_net_priv, retry_work);
+
+ /*
+ * Try to bring the NetIO interface up. If it fails, reschedule
+ * ourselves to try again later; otherwise, tell Linux we now have
+ * a working link. ISSUE: What if the return value is negative?
+ */
+ if (tile_net_open_inner(priv->dev))
+ schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+ TILE_NET_RETRY_INTERVAL);
+ else
+ netif_carrier_on(priv->dev);
+}
+
+
+/*
+ * Called when a network interface is made active.
+ *
+ * Returns 0 on success, negative value on failure.
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ *
+ * If the actual link is not available yet, then we tell Linux that
+ * we have no carrier, and we keep checking until the link comes up.
+ */
+static int tile_net_open(struct net_device *dev)
+{
+ int ret = 0;
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ /*
+ * We rely on priv->partly_opened to tell us if this is the
+ * first time this interface is being brought up. If it is
+ * set, the IPP was already initialized and should not be
+ * initialized again.
+ */
+ if (!priv->partly_opened) {
+
+ int count;
+ int credits;
+
+ /* Initialize LIPP/LEPP, and start the Shim. */
+ ret = tile_net_open_aux(dev);
+ if (ret < 0) {
+ pr_err("tile_net_open_aux failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Analyze the network cpus. */
+
+ if (network_cpus_used)
+ cpumask_copy(&priv->network_cpus_map,
+ &network_cpus_map);
+ else
+ cpumask_copy(&priv->network_cpus_map, cpu_online_mask);
+
+
+ count = cpumask_weight(&priv->network_cpus_map);
+
+ /* Limit credits to available buffers, and apply min. */
+ credits = max(16, (LIPP_LARGE_BUFFERS / count) & ~1);
+
+ /* Apply "GBE" max limit. */
+ /* ISSUE: Use higher limit for XGBE? */
+ credits = min(NETIO_MAX_RECEIVE_PKTS, credits);
+
+ priv->network_cpus_count = count;
+ priv->network_cpus_credits = credits;
+
+#ifdef TILE_NET_DEBUG
+ pr_info("Using %d network cpus, with %d credits each\n",
+ priv->network_cpus_count, priv->network_cpus_credits);
+#endif
+
+ priv->partly_opened = 1;
+ }
+
+ /*
+ * Attempt to bring up the link.
+ */
+ ret = tile_net_open_inner(dev);
+ if (ret <= 0) {
+ if (ret == 0)
+ netif_carrier_on(dev);
+ return ret;
+ }
+
+ /*
+ * We were unable to bring up the NetIO interface, but we want to
+ * try again in a little bit. Tell Linux that we have no carrier
+ * so it doesn't try to use the interface before the link comes up
+ * and then remember to try again later.
+ */
+ netif_carrier_off(dev);
+ schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+ TILE_NET_RETRY_INTERVAL);
+
+ return 0;
+}
+
+
+/*
+ * Disables a network interface.
+ *
+ * Returns 0, this is not allowed to fail.
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ *
+ * ISSUE: Can this can be called while "tile_net_poll()" is running?
+ */
+static int tile_net_stop(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ bool pending = true;
+
+ PDEBUG("tile_net_stop()\n");
+
+ /* ISSUE: Only needed if not yet fully open. */
+ cancel_delayed_work_sync(&priv->retry_work);
+
+ /* Can't transmit any more. */
+ netif_stop_queue(dev);
+
+ /*
+ * Disable hypervisor interrupts on each tile.
+ */
+ on_each_cpu(tile_net_disable_intr, (void *)dev, 1);
+
+ /*
+ * Unregister the interrupt handler.
+ * The __ffs() function returns the index into the interrupt handler
+ * table from the interrupt bit mask which should have one bit
+ * and one bit only set.
+ */
+ if (priv->intr_id)
+ free_irq(__ffs(priv->intr_id), dev);
+
+ /*
+ * Drain all the LIPP buffers.
+ */
+
+ while (true) {
+ int buffer;
+
+ /* NOTE: This should never fail. */
+ if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&buffer,
+ sizeof(buffer), NETIO_IPP_DRAIN_OFF) < 0)
+ break;
+
+ /* Stop when done. */
+ if (buffer == 0)
+ break;
+
+ {
+ /* Convert "linux_buffer_t" to "va". */
+ void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+ /* Acquire the associated "skb". */
+ struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+ struct sk_buff *skb = *skb_ptr;
+
+ kfree_skb(skb);
+ }
+ }
+
+ /* Stop LIPP/LEPP. */
+ tile_net_stop_aux(dev);
+
+
+ priv->fully_opened = 0;
+
+
+ /*
+ * XXX: ISSUE: It appears that, in practice anyway, by the
+ * time we get here, there are no pending completions.
+ */
+ while (pending) {
+
+ struct sk_buff *olds[32];
+ unsigned int wanted = 32;
+ unsigned int i, nolds = 0;
+
+ nolds = tile_net_lepp_grab_comps(dev, olds,
+ wanted, &pending);
+
+ /* ISSUE: We have never actually seen this debug spew. */
+ if (nolds != 0)
+ pr_info("During tile_net_stop(), grabbed %d comps.\n",
+ nolds);
+
+ for (i = 0; i < nolds; i++)
+ kfree_skb(olds[i]);
+ }
+
+
+ /* Wipe the EPP queue. */
+ memset(priv->epp_queue, 0, sizeof(lepp_queue_t));
+
+ /* Evict the EPP queue. */
+ finv_buffer(priv->epp_queue, PAGE_SIZE);
+
+ return 0;
+}
+
+
+/*
+ * Prepare the "frags" info for the resulting LEPP command.
+ *
+ * If needed, flush the memory used by the frags.
+ */
+static unsigned int tile_net_tx_frags(lepp_frag_t *frags,
+ struct sk_buff *skb,
+ void *b_data, unsigned int b_len)
+{
+ unsigned int i, n = 0;
+
+ struct skb_shared_info *sh = skb_shinfo(skb);
+
+ phys_addr_t cpa;
+
+ if (b_len != 0) {
+
+ if (!hash_default)
+ finv_buffer_remote(b_data, b_len);
+
+ cpa = __pa(b_data);
+ frags[n].cpa_lo = cpa;
+ frags[n].cpa_hi = cpa >> 32;
+ frags[n].length = b_len;
+ frags[n].hash_for_home = hash_default;
+ n++;
+ }
+
+ for (i = 0; i < sh->nr_frags; i++) {
+
+ skb_frag_t *f = &sh->frags[i];
+ unsigned long pfn = page_to_pfn(f->page);
+
+ /* FIXME: Compute "hash_for_home" properly. */
+ /* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */
+ int hash_for_home = hash_default;
+
+ /* FIXME: Hmmm. */
+ if (!hash_default) {
+ void *va = pfn_to_kaddr(pfn) + f->page_offset;
+ BUG_ON(PageHighMem(f->page));
+ finv_buffer_remote(va, f->size);
+ }
+
+ cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset;
+ frags[n].cpa_lo = cpa;
+ frags[n].cpa_hi = cpa >> 32;
+ frags[n].length = f->size;
+ frags[n].hash_for_home = hash_for_home;
+ n++;
+ }
+
+ return n;
+}
+
+
+/*
+ * This function takes "skb", consisting of a header template and a
+ * payload, and hands it to LEPP, to emit as one or more segments,
+ * each consisting of a possibly modified header, plus a piece of the
+ * payload, via a process known as "tcp segmentation offload".
+ *
+ * Usually, "data" will contain the header template, of size "sh_len",
+ * and "sh->frags" will contain "skb->data_len" bytes of payload, and
+ * there will be "sh->gso_segs" segments.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ *
+ * In theory, "sh->nr_frags" could be 3, but in practice, it seems
+ * that this will never actually happen.
+ *
+ * See "emulate_large_send_offload()" for some reference code, which
+ * does not handle checksumming.
+ *
+ * ISSUE: How do we make sure that high memory DMA does not migrate?
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+ struct tile_net_stats_t *stats = &info->stats;
+
+ struct skb_shared_info *sh = skb_shinfo(skb);
+
+ unsigned char *data = skb->data;
+
+ /* The ip header follows the ethernet header. */
+ struct iphdr *ih = ip_hdr(skb);
+ unsigned int ih_len = ih->ihl * 4;
+
+ /* Note that "nh == ih", by definition. */
+ unsigned char *nh = skb_network_header(skb);
+ unsigned int eh_len = nh - data;
+
+ /* The tcp header follows the ip header. */
+ struct tcphdr *th = (struct tcphdr *)(nh + ih_len);
+ unsigned int th_len = th->doff * 4;
+
+ /* The total number of header bytes. */
+ /* NOTE: This may be less than skb_headlen(skb). */
+ unsigned int sh_len = eh_len + ih_len + th_len;
+
+ /* The number of payload bytes at "skb->data + sh_len". */
+ /* This is non-zero for sendfile() without HIGHDMA. */
+ unsigned int b_len = skb_headlen(skb) - sh_len;
+
+ /* The total number of payload bytes. */
+ unsigned int d_len = b_len + skb->data_len;
+
+ /* The maximum payload size. */
+ unsigned int p_len = sh->gso_size;
+
+ /* The total number of segments. */
+ unsigned int num_segs = sh->gso_segs;
+
+ /* The temporary copy of the command. */
+ u32 cmd_body[(LEPP_MAX_CMD_SIZE + 3) / 4];
+ lepp_tso_cmd_t *cmd = (lepp_tso_cmd_t *)cmd_body;
+
+ /* Analyze the "frags". */
+ unsigned int num_frags =
+ tile_net_tx_frags(cmd->frags, skb, data + sh_len, b_len);
+
+ /* The size of the command, including frags and header. */
+ size_t cmd_size = LEPP_TSO_CMD_SIZE(num_frags, sh_len);
+
+ /* The command header. */
+ lepp_tso_cmd_t cmd_init = {
+ .tso = true,
+ .header_size = sh_len,
+ .ip_offset = eh_len,
+ .tcp_offset = eh_len + ih_len,
+ .payload_size = p_len,
+ .num_frags = num_frags,
+ };
+
+ unsigned long irqflags;
+
+ lepp_queue_t *eq = priv->epp_queue;
+
+ struct sk_buff *olds[4];
+ unsigned int wanted = 4;
+ unsigned int i, nolds = 0;
+
+ unsigned int cmd_head, cmd_tail, cmd_next;
+ unsigned int comp_tail;
+
+ unsigned int free_slots;
+
+
+ /* Paranoia. */
+ BUG_ON(skb->protocol != htons(ETH_P_IP));
+ BUG_ON(ih->protocol != IPPROTO_TCP);
+ BUG_ON(skb->ip_summed != CHECKSUM_PARTIAL);
+ BUG_ON(num_frags > LEPP_MAX_FRAGS);
+ /*--BUG_ON(num_segs != (d_len + (p_len - 1)) / p_len); */
+ BUG_ON(num_segs <= 1);
+
+
+ /* Finish preparing the command. */
+
+ /* Copy the command header. */
+ *cmd = cmd_init;
+
+ /* Copy the "header". */
+ memcpy(&cmd->frags[num_frags], data, sh_len);
+
+
+ /* Prefetch and wait, to minimize time spent holding the spinlock. */
+ prefetch_L1(&eq->comp_tail);
+ prefetch_L1(&eq->cmd_tail);
+ mb();
+
+
+ /* Enqueue the command. */
+
+ spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+ /*
+ * Handle completions if needed to make room.
+ * HACK: Spin until there is sufficient room.
+ */
+ free_slots = lepp_num_free_comp_slots(eq);
+ if (free_slots < 1) {
+spin:
+ nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+ wanted - nolds, NULL);
+ if (lepp_num_free_comp_slots(eq) < 1)
+ goto spin;
+ }
+
+ cmd_head = eq->cmd_head;
+ cmd_tail = eq->cmd_tail;
+
+ /* NOTE: The "gotos" below are untested. */
+
+ /* Prepare to advance, detecting full queue. */
+ cmd_next = cmd_tail + cmd_size;
+ if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+ goto spin;
+ if (cmd_next > LEPP_CMD_LIMIT) {
+ cmd_next = 0;
+ if (cmd_next == cmd_head)
+ goto spin;
+ }
+
+ /* Copy the command. */
+ memcpy(&eq->cmds[cmd_tail], cmd, cmd_size);
+
+ /* Advance. */
+ cmd_tail = cmd_next;
+
+ /* Record "skb" for eventual freeing. */
+ comp_tail = eq->comp_tail;
+ eq->comps[comp_tail] = skb;
+ LEPP_QINC(comp_tail);
+ eq->comp_tail = comp_tail;
+
+ /* Flush before allowing LEPP to handle the command. */
+ __insn_mf();
+
+ eq->cmd_tail = cmd_tail;
+
+ spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+ if (nolds == 0)
+ nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+ /* Handle completions. */
+ for (i = 0; i < nolds; i++)
+ kfree_skb(olds[i]);
+
+ /* Update stats. */
+ stats->tx_packets += num_segs;
+ stats->tx_bytes += (num_segs * sh_len) + d_len;
+
+ /* Make sure the egress timer is scheduled. */
+ tile_net_schedule_egress_timer(info);
+
+ return NETDEV_TX_OK;
+}
+
+
+/*
+ * Transmit a packet (called by the kernel via "hard_start_xmit" hook).
+ */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int my_cpu = smp_processor_id();
+ struct tile_net_cpu *info = priv->cpu[my_cpu];
+ struct tile_net_stats_t *stats = &info->stats;
+
+ unsigned long irqflags;
+
+ struct skb_shared_info *sh = skb_shinfo(skb);
+
+ unsigned int len = skb->len;
+ unsigned char *data = skb->data;
+
+ unsigned int csum_start = skb->csum_start - skb_headroom(skb);
+
+ lepp_frag_t frags[LEPP_MAX_FRAGS];
+
+ unsigned int num_frags;
+
+ lepp_queue_t *eq = priv->epp_queue;
+
+ struct sk_buff *olds[4];
+ unsigned int wanted = 4;
+ unsigned int i, nolds = 0;
+
+ unsigned int cmd_size = sizeof(lepp_cmd_t);
+
+ unsigned int cmd_head, cmd_tail, cmd_next;
+ unsigned int comp_tail;
+
+ lepp_cmd_t cmds[LEPP_MAX_FRAGS];
+
+ unsigned int free_slots;
+
+
+ /*
+ * This is paranoia, since we think that if the link doesn't come
+ * up, telling Linux we have no carrier will keep it from trying
+ * to transmit. If it does, though, we can't execute this routine,
+ * since data structures we depend on aren't set up yet.
+ */
+ if (!info->registered)
+ return NETDEV_TX_BUSY;
+
+
+ /* Save the timestamp. */
+ dev->trans_start = jiffies;
+
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (hash_default) {
+ HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data);
+ if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+ panic("Non-coherent egress buffer!");
+ }
+#endif
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+ /* ISSUE: Does not dump the "frags". */
+ dump_packet(data, skb_headlen(skb), "tx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+
+ if (sh->gso_size != 0)
+ return tile_net_tx_tso(skb, dev);
+
+
+ /* Prepare the commands. */
+
+ num_frags = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+ for (i = 0; i < num_frags; i++) {
+
+ bool final = (i == num_frags - 1);
+
+ lepp_cmd_t cmd = {
+ .cpa_lo = frags[i].cpa_lo,
+ .cpa_hi = frags[i].cpa_hi,
+ .length = frags[i].length,
+ .hash_for_home = frags[i].hash_for_home,
+ .send_completion = final,
+ .end_of_packet = final
+ };
+
+ if (i == 0 && skb->ip_summed == CHECKSUM_PARTIAL) {
+ cmd.compute_checksum = 1;
+ cmd.checksum_data.bits.start_byte = csum_start;
+ cmd.checksum_data.bits.count = len - csum_start;
+ cmd.checksum_data.bits.destination_byte =
+ csum_start + skb->csum_offset;
+ }
+
+ cmds[i] = cmd;
+ }
+
+
+ /* Prefetch and wait, to minimize time spent holding the spinlock. */
+ prefetch_L1(&eq->comp_tail);
+ prefetch_L1(&eq->cmd_tail);
+ mb();
+
+
+ /* Enqueue the commands. */
+
+ spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+ /*
+ * Handle completions if needed to make room.
+ * HACK: Spin until there is sufficient room.
+ */
+ free_slots = lepp_num_free_comp_slots(eq);
+ if (free_slots < 1) {
+spin:
+ nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+ wanted - nolds, NULL);
+ if (lepp_num_free_comp_slots(eq) < 1)
+ goto spin;
+ }
+
+ cmd_head = eq->cmd_head;
+ cmd_tail = eq->cmd_tail;
+
+ /* NOTE: The "gotos" below are untested. */
+
+ /* Copy the commands, or fail. */
+ for (i = 0; i < num_frags; i++) {
+
+ /* Prepare to advance, detecting full queue. */
+ cmd_next = cmd_tail + cmd_size;
+ if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+ goto spin;
+ if (cmd_next > LEPP_CMD_LIMIT) {
+ cmd_next = 0;
+ if (cmd_next == cmd_head)
+ goto spin;
+ }
+
+ /* Copy the command. */
+ *(lepp_cmd_t *)&eq->cmds[cmd_tail] = cmds[i];
+
+ /* Advance. */
+ cmd_tail = cmd_next;
+ }
+
+ /* Record "skb" for eventual freeing. */
+ comp_tail = eq->comp_tail;
+ eq->comps[comp_tail] = skb;
+ LEPP_QINC(comp_tail);
+ eq->comp_tail = comp_tail;
+
+ /* Flush before allowing LEPP to handle the command. */
+ __insn_mf();
+
+ eq->cmd_tail = cmd_tail;
+
+ spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+ if (nolds == 0)
+ nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+ /* Handle completions. */
+ for (i = 0; i < nolds; i++)
+ kfree_skb(olds[i]);
+
+ /* HACK: Track "expanded" size for short packets (e.g. 42 < 60). */
+ stats->tx_packets++;
+ stats->tx_bytes += ((len >= ETH_ZLEN) ? len : ETH_ZLEN);
+
+ /* Make sure the egress timer is scheduled. */
+ tile_net_schedule_egress_timer(info);
+
+ return NETDEV_TX_OK;
+}
+
+
+/*
+ * Deal with a transmit timeout.
+ */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+ PDEBUG("tile_net_tx_timeout()\n");
+ PDEBUG("Transmit timeout at %ld, latency %ld\n", jiffies,
+ jiffies - dev->trans_start);
+
+ /* XXX: ISSUE: This doesn't seem useful for us. */
+ netif_wake_queue(dev);
+}
+
+
+/*
+ * Ioctl commands.
+ */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ return -EOPNOTSUPP;
+}
+
+
+/*
+ * Get System Network Statistics.
+ *
+ * Returns the address of the device statistics structure.
+ */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ u32 rx_packets = 0;
+ u32 tx_packets = 0;
+ u32 rx_bytes = 0;
+ u32 tx_bytes = 0;
+ int i;
+
+ for_each_online_cpu(i) {
+ if (priv->cpu[i]) {
+ rx_packets += priv->cpu[i]->stats.rx_packets;
+ rx_bytes += priv->cpu[i]->stats.rx_bytes;
+ tx_packets += priv->cpu[i]->stats.tx_packets;
+ tx_bytes += priv->cpu[i]->stats.tx_bytes;
+ }
+ }
+
+ priv->stats.rx_packets = rx_packets;
+ priv->stats.rx_bytes = rx_bytes;
+ priv->stats.tx_packets = tx_packets;
+ priv->stats.tx_bytes = tx_bytes;
+
+ return &priv->stats;
+}
+
+
+/*
+ * Change the "mtu".
+ *
+ * The "change_mtu" method is usually not needed.
+ * If you need it, it must be like this.
+ */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+ PDEBUG("tile_net_change_mtu()\n");
+
+ /* Check ranges. */
+ if ((new_mtu < 68) || (new_mtu > 1500))
+ return -EINVAL;
+
+ /* Accept the value. */
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+
+/*
+ * Change the Ethernet Address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address. However,
+ * the IPP does not do anything with the MAC address, so the address which
+ * gets used on outgoing packets, and which is accepted on incoming packets,
+ * is completely up to the NetIO program or kernel driver which is actually
+ * handling them.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ /* ISSUE: Note that "dev_addr" is now a pointer. */
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ return 0;
+}
+
+
+/*
+ * Obtain the MAC address from the hypervisor.
+ * This must be done before opening the device.
+ */
+static int tile_net_get_mac(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ char hv_dev_name[32];
+ int len;
+
+ __netio_getset_offset_t offset = { .word = NETIO_IPP_PARAM_OFF };
+
+ int ret;
+
+ /* For example, "xgbe0". */
+ strcpy(hv_dev_name, dev->name);
+ len = strlen(hv_dev_name);
+
+ /* For example, "xgbe/0". */
+ hv_dev_name[len] = hv_dev_name[len - 1];
+ hv_dev_name[len - 1] = '/';
+ len++;
+
+ /* For example, "xgbe/0/native_hash". */
+ strcpy(hv_dev_name + len, hash_default ? "/native_hash" : "/native");
+
+ /* Get the hypervisor handle for this device. */
+ priv->hv_devhdl = hv_dev_open((HV_VirtAddr)hv_dev_name, 0);
+ PDEBUG("hv_dev_open(%s) returned %d %p\n",
+ hv_dev_name, priv->hv_devhdl, &priv->hv_devhdl);
+ if (priv->hv_devhdl < 0) {
+ if (priv->hv_devhdl == HV_ENODEV)
+ printk(KERN_DEBUG "Ignoring unconfigured device %s\n",
+ hv_dev_name);
+ else
+ printk(KERN_DEBUG "hv_dev_open(%s) returned %d\n",
+ hv_dev_name, priv->hv_devhdl);
+ return -1;
+ }
+
+ /*
+ * Read the hardware address from the hypervisor.
+ * ISSUE: Note that "dev_addr" is now a pointer.
+ */
+ offset.bits.class = NETIO_PARAM;
+ offset.bits.addr = NETIO_PARAM_MAC;
+ ret = hv_dev_pread(priv->hv_devhdl, 0,
+ (HV_VirtAddr)dev->dev_addr, dev->addr_len,
+ offset.word);
+ PDEBUG("hv_dev_pread(NETIO_PARAM_MAC) returned %d\n", ret);
+ if (ret <= 0) {
+ printk(KERN_DEBUG "hv_dev_pread(NETIO_PARAM_MAC) %s failed\n",
+ dev->name);
+ /*
+ * Since the device is configured by the hypervisor but we
+ * can't get its MAC address, we are most likely running
+ * the simulator, so let's generate a random MAC address.
+ */
+ random_ether_addr(dev->dev_addr);
+ }
+
+ return 0;
+}
+
+
+static struct net_device_ops tile_net_ops = {
+ .ndo_open = tile_net_open,
+ .ndo_stop = tile_net_stop,
+ .ndo_start_xmit = tile_net_tx,
+ .ndo_do_ioctl = tile_net_ioctl,
+ .ndo_get_stats = tile_net_get_stats,
+ .ndo_change_mtu = tile_net_change_mtu,
+ .ndo_tx_timeout = tile_net_tx_timeout,
+ .ndo_set_mac_address = tile_net_set_mac_address
+};
+
+
+/*
+ * The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+ PDEBUG("tile_net_setup()\n");
+
+ ether_setup(dev);
+
+ dev->netdev_ops = &tile_net_ops;
+
+ dev->watchdog_timeo = TILE_NET_TIMEOUT;
+
+ /* We want lockless xmit. */
+ dev->features |= NETIF_F_LLTX;
+
+ /* We support hardware tx checksums. */
+ dev->features |= NETIF_F_HW_CSUM;
+
+ /* We support scatter/gather. */
+ dev->features |= NETIF_F_SG;
+
+ /* We support TSO. */
+ dev->features |= NETIF_F_TSO;
+
+#ifdef TILE_NET_GSO
+ /* We support GSO. */
+ dev->features |= NETIF_F_GSO;
+#endif
+
+ if (hash_default)
+ dev->features |= NETIF_F_HIGHDMA;
+
+ /* ISSUE: We should support NETIF_F_UFO. */
+
+ dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN;
+
+ dev->mtu = TILE_NET_MTU;
+}
+
+
+/*
+ * Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static struct net_device *tile_net_dev_init(const char *name)
+{
+ int ret;
+ struct net_device *dev;
+ struct tile_net_priv *priv;
+ struct page *page;
+
+ /*
+ * Allocate the device structure. This allocates "priv", calls
+ * tile_net_setup(), and saves "name". Normally, "name" is a
+ * template, instantiated by register_netdev(), but not for us.
+ */
+ dev = alloc_netdev(sizeof(*priv), name, tile_net_setup);
+ if (!dev) {
+ pr_err("alloc_netdev(%s) failed\n", name);
+ return NULL;
+ }
+
+ priv = netdev_priv(dev);
+
+ /* Initialize "priv". */
+
+ memset(priv, 0, sizeof(*priv));
+
+ /* Save "dev" for "tile_net_open_retry()". */
+ priv->dev = dev;
+
+ INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry);
+
+ spin_lock_init(&priv->cmd_lock);
+ spin_lock_init(&priv->comp_lock);
+
+ /* Allocate "epp_queue". */
+ BUG_ON(get_order(sizeof(lepp_queue_t)) != 0);
+ page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
+ if (!page) {
+ free_netdev(dev);
+ return NULL;
+ }
+ priv->epp_queue = page_address(page);
+
+ /* Register the network device. */
+ ret = register_netdev(dev);
+ if (ret) {
+ pr_err("register_netdev %s failed %d\n", dev->name, ret);
+ free_page((unsigned long)priv->epp_queue);
+ free_netdev(dev);
+ return NULL;
+ }
+
+ /* Get the MAC address. */
+ ret = tile_net_get_mac(dev);
+ if (ret < 0) {
+ unregister_netdev(dev);
+ free_page((unsigned long)priv->epp_queue);
+ free_netdev(dev);
+ return NULL;
+ }
+
+ return dev;
+}
+
+
+/*
+ * Module cleanup.
+ */
+static void tile_net_cleanup(void)
+{
+ int i;
+
+ for (i = 0; i < TILE_NET_DEVS; i++) {
+ if (tile_net_devs[i]) {
+ struct net_device *dev = tile_net_devs[i];
+ struct tile_net_priv *priv = netdev_priv(dev);
+ unregister_netdev(dev);
+ finv_buffer(priv->epp_queue, PAGE_SIZE);
+ free_page((unsigned long)priv->epp_queue);
+ free_netdev(dev);
+ }
+ }
+}
+
+
+/*
+ * Module initialization.
+ */
+static int tile_net_init_module(void)
+{
+ pr_info("Tilera IPP Net Driver\n");
+
+ tile_net_devs[0] = tile_net_dev_init("xgbe0");
+ tile_net_devs[1] = tile_net_dev_init("xgbe1");
+ tile_net_devs[2] = tile_net_dev_init("gbe0");
+ tile_net_devs[3] = tile_net_dev_init("gbe1");
+
+ return 0;
+}
+
+
+#ifndef MODULE
+/*
+ * The "network_cpus" boot argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "network_cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static int __init network_cpus_setup(char *str)
+{
+ int rc = cpulist_parse_crop(str, &network_cpus_map);
+ if (rc != 0) {
+ pr_warning("network_cpus=%s: malformed cpu list\n",
+ str);
+ } else {
+
+ /* Remove dedicated cpus. */
+ cpumask_and(&network_cpus_map, &network_cpus_map,
+ cpu_possible_mask);
+
+
+ if (cpumask_empty(&network_cpus_map)) {
+ pr_warning("Ignoring network_cpus='%s'.\n",
+ str);
+ } else {
+ char buf[1024];
+ cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+ pr_info("Linux network CPUs: %s\n", buf);
+ network_cpus_used = true;
+ }
+ }
+
+ return 0;
+}
+__setup("network_cpus=", network_cpus_setup);
+#endif
+
+
+module_init(tile_net_init_module);
+module_exit(tile_net_cleanup);
DMFE_DBUG(0, "dmfe_start_xmit", 0);
- /* Resource flag check */
- netif_stop_queue(dev);
-
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
pr_err("big packet = %d\n", (u16)skb->len);
return NETDEV_TX_OK;
}
+ /* Resource flag check */
+ netif_stop_queue(dev);
+
spin_lock_irqsave(&db->lock, flags);
/* No Tx resource check, it never happen nromally */
}
strcpy(info->driver, KBUILD_MODNAME);
- strcpy(info->version, UTS_RELEASE);
strcpy(info->bus_info, pci_name(pci_dev));
}
#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size
*/
#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT 512
+#define UCC_GETH_UTFTT_INIT 256 /* 1/2 utfs
+ due to errata */
/* Gigabit Ethernet (1000 Mbps) */
#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual
FIFO size */
// ASIX AX88178 10/100/1000
USB_DEVICE (0x0b95, 0x1780),
.driver_info = (unsigned long) &ax88178_info,
+}, {
+ // Logitec LAN-GTJ/U2A
+ USB_DEVICE (0x0789, 0x0160),
+ .driver_info = (unsigned long) &ax88178_info,
}, {
// Linksys USB200M Rev 2
USB_DEVICE (0x13b1, 0x0018),
/* Packet is complete. Inject into stack. */
/* We have IP packet here */
odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
- /* don't check it */
- odev->skb_rx_buf->ip_summed =
- CHECKSUM_UNNECESSARY;
-
skb_reset_mac_header(odev->skb_rx_buf);
/* Ship it off to the kernel */
case HSO_INTF_BULK:
/* It's a regular bulk interface */
- if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
- !disable_net)
- hso_dev = hso_create_net_device(interface, port_spec);
- else
+ if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+ if (!disable_net)
+ hso_dev =
+ hso_create_net_device(interface, port_spec);
+ } else {
hso_dev =
hso_create_bulk_serial_device(interface, port_spec);
+ }
if (!hso_dev)
goto exit;
break;
/*
- * MOSCHIP MCS7830 based USB 2.0 Ethernet Devices
+ * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
*
* based on usbnet.c, asix.c and the vendor provided mcs7830 driver
*
*
* Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
*
+ * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
+ * per active notification by manufacturer
+ *
* TODO:
* - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
* - implement ethtool_ops get_pauseparam/set_pauseparam
#define MCS7830_MAX_MCAST 64
#define MCS7830_VENDOR_ID 0x9710
+#define MCS7832_PRODUCT_ID 0x7832
#define MCS7830_PRODUCT_ID 0x7830
#define MCS7730_PRODUCT_ID 0x7730
if (!ret)
ret = mcs7830_write_phy(dev, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART );
- return ret < 0 ? : 0;
+ return ret;
}
}
static const struct driver_info moschip_info = {
- .description = "MOSCHIP 7830/7730 usb-NET adapter",
+ .description = "MOSCHIP 7830/7832/7730 usb-NET adapter",
.bind = mcs7830_bind,
.rx_fixup = mcs7830_rx_fixup,
.flags = FLAG_ETHER,
};
static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
+ .driver_info = (unsigned long) &moschip_info,
+ },
{
USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
.driver_info = (unsigned long) &moschip_info,
if (!(rcv->flags & IFF_UP))
goto tx_drop;
- if (dev->features & NETIF_F_NO_CSUM)
+ /* don't change ip_summed == CHECKSUM_PARTIAL, as that
+ will cause bad checksum on forwarded packets */
+ if (skb->ip_summed == CHECKSUM_NONE)
skb->ip_summed = rcv_priv->ip_summed;
length = skb->len + ETH_HLEN;
struct net_device *dev = port->netdev;
card_t* card = port->card;
u8 stat;
+ unsigned count = 0;
spin_lock(&port->lock);
dev->stats.tx_bytes += readw(&desc->len);
}
writeb(0, &desc->stat); /* Free descriptor */
+ count++;
port->txlast = (port->txlast + 1) % card->tx_ring_buffers;
}
- netif_wake_queue(dev);
+ if (count)
+ netif_wake_queue(dev);
spin_unlock(&port->lock);
}
static int x25_asy_close(struct net_device *dev)
{
struct x25_asy *sl = netdev_priv(dev);
- int err;
spin_lock(&sl->lock);
if (sl->tty)
netif_stop_queue(dev);
sl->rcount = 0;
sl->xleft = 0;
- err = lapb_unregister(dev);
- if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
- err);
spin_unlock(&sl->lock);
return 0;
}
if (err)
return err;
/* Done. We have linked the TTY line to a channel. */
- return sl->dev->base_addr;
+ return 0;
}
static void x25_asy_close_tty(struct tty_struct *tty)
{
struct x25_asy *sl = tty->disc_data;
+ int err;
/* First make sure we're connected. */
if (!sl || sl->magic != X25_ASY_MAGIC)
dev_close(sl->dev);
rtnl_unlock();
+ err = lapb_unregister(sl->dev);
+ if (err != LAPB_OK)
+ printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
+ err);
+
tty->disc_data = NULL;
sl->tty = NULL;
x25_asy_free(sl);
sc->bmisscount = 0;
}
- if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
+ if ((sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
u64 tsf = ath5k_hw_get_tsf64(ah);
u32 tsftu = TSF_TO_TU(tsf);
int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval;
/* NB: hw still stops DMA, so proceed */
}
- /* refresh the beacon for AP mode */
- if (sc->opmode == NL80211_IFTYPE_AP)
+ /* refresh the beacon for AP or MESH mode */
+ if (sc->opmode == NL80211_IFTYPE_AP ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT)
ath5k_beacon_update(sc->hw, vif);
ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
/* Assign the vap/adhoc to a beacon xmit slot. */
if ((avf->opmode == NL80211_IFTYPE_AP) ||
- (avf->opmode == NL80211_IFTYPE_ADHOC)) {
+ (avf->opmode == NL80211_IFTYPE_ADHOC) ||
+ (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
int slot;
WARN_ON(list_empty(&sc->bcbuf));
sc->bslot[avf->bslot] = vif;
if (avf->opmode == NL80211_IFTYPE_AP)
sc->num_ap_vifs++;
- else
+ else if (avf->opmode == NL80211_IFTYPE_ADHOC)
sc->num_adhoc_vifs++;
}
#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */
#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */
+#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6))
+
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
}
},
.ctlPowerData_2G = {
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
},
.modalHeader5G = {
/* 4 idle,t1,t2,b (4 bits per setting) */
.ctlPowerData_5G = {
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 0}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 0}, {60, 1}, {60, 1}, {60, 0},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
- {60, 0}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 0}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
+ CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
}
},
}
struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
if (is2GHz)
- return ctl_2g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
else
- return ctl_5g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
}
static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
if (is2GHz) {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
- ctl_2g[idx].ctlEdges[edge - 1].flag)
- return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
} else {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
- ctl_5g[idx].ctlEdges[edge - 1].flag)
- return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
}
return AR9300_MAX_RATE_POWER;
u8 tPow2x[14];
} __packed;
-struct cal_ctl_edge_pwr {
- u8 tPower:6,
- flag:2;
-} __packed;
-
struct cal_ctl_data_2g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
} __packed;
struct cal_ctl_data_5g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
} __packed;
struct ar9300_eeprom {
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/completion.h>
+#include <linux/pm_qos_params.h>
#include "debug.h"
#include "common.h"
struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
int ath_tx_setup(struct ath_softc *sc, int haltype);
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
void ath_draintxq(struct ath_softc *sc,
struct ath_txq *txq, bool retry_tx);
void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
struct ath_descdma txsdma;
struct ath_ant_comb ant_comb;
+
+ struct pm_qos_request_list pm_qos_req;
};
struct ath_wiphy {
}
extern struct ieee80211_ops ath9k_ops;
-extern struct pm_qos_request_list ath9k_pm_qos_req;
extern int modparam_nohwcrypt;
extern int led_blink;
for (i = 0; (i < num_band_edges) &&
(pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) {
- twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+ twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl);
break;
} else if ((i > 0) &&
(freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
is2GHz))) {
if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel,
is2GHz) < freq &&
- pRdEdgesPower[i - 1].flag) {
+ CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) {
twiceMaxEdgePower =
- pRdEdgesPower[i - 1].tPower;
+ CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl);
}
break;
}
#define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1)
+#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
+#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
+
+#define LNA_CTL_BUF_MODE BIT(0)
+#define LNA_CTL_ISEL_LO BIT(1)
+#define LNA_CTL_ISEL_HI BIT(2)
+#define LNA_CTL_BUF_IN BIT(3)
+#define LNA_CTL_FEM_BAND BIT(4)
+#define LNA_CTL_LOCAL_BIAS BIT(5)
+#define LNA_CTL_FORCE_XPA BIT(6)
+#define LNA_CTL_USE_ANT1 BIT(7)
+
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
u8 xatten2Margin[AR5416_MAX_CHAINS];
u8 ob_ch1;
u8 db_ch1;
- u8 useAnt1:1,
- force_xpaon:1,
- local_bias:1,
- femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+ u8 lna_ctl;
u8 miscBits;
u16 xpaBiasLvlFreq[3];
u8 futureModal[6];
u8 tPow2x[8];
} __packed;
-
-#ifdef __BIG_ENDIAN_BITFIELD
-struct cal_ctl_edges {
- u8 bChannel;
- u8 flag:2, tPower:6;
-} __packed;
-#else
struct cal_ctl_edges {
u8 bChannel;
- u8 tPower:6, flag:2;
+ u8 ctl;
} __packed;
-#endif
struct cal_data_op_loop_ar9287 {
u8 pwrPdg[2][5];
int addr, eep_start_loc;
eep_data = (u16 *)eep;
- if (ah->hw_version.devid == 0x7015)
+ if (AR9287_HTC_DEVID(ah))
eep_start_loc = AR9287_HTC_EEP_START_LOC;
else
eep_start_loc = AR9287_EEP_START_LOC;
ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
AR_AN_TOP2_LOCALBIAS,
AR_AN_TOP2_LOCALBIAS_S,
- pModal->local_bias);
+ !!(pModal->lna_ctl &
+ LNA_CTL_LOCAL_BIAS));
REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
- pModal->force_xpaon);
+ !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA));
}
REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
- scaledPower = max((u16)0, scaledPower);
-
if (IS_CHAN_2GHZ(chan)) {
numCtlModes = ARRAY_SIZE(ctlModesFor11g) -
SUB_NUM_CTL_MODES_AT_2G_40;
num_ant_config = 1;
- if (pBase->version >= 0x0E0D)
- if (pModal->useAnt1)
- num_ant_config += 1;
+ if (pBase->version >= 0x0E0D &&
+ (pModal->lna_ctl & LNA_CTL_USE_ANT1))
+ num_ant_config += 1;
return num_ant_config;
}
{ USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */
{ USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */
{ USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */
+ { USB_DEVICE(0x13D3, 0x3348) }, /* Azurewave */
+ { USB_DEVICE(0x13D3, 0x3349) }, /* Azurewave */
+ { USB_DEVICE(0x13D3, 0x3350) }, /* Azurewave */
{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
{ USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */
+ { USB_DEVICE(0x040D, 0x3801) }, /* VIA */
+ { USB_DEVICE(0x1668, 0x1200) }, /* Verizon */
{ },
};
case 0x7010:
case 0x7015:
case 0x9018:
+ case 0xA704:
+ case 0x1200:
firm_offset = AR7010_FIRMWARE_TEXT;
break;
default:
case 0x7010:
case 0x7015:
case 0x9018:
+ case 0xA704:
+ case 0x1200:
if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202)
hif_dev->fw_name = FIRMWARE_AR7010_1_1;
else
struct hif_device_usb *hif_dev =
(struct hif_device_usb *) usb_get_intfdata(interface);
+ /*
+ * The device has to be set to FULLSLEEP mode in case no
+ * interface is up.
+ */
+ if (!(hif_dev->flags & HIF_USB_START))
+ ath9k_htc_suspend(hif_dev->htc_handle);
+
ath9k_hif_usb_dealloc_urbs(hif_dev);
return 0;
void ath9k_htc_ps_wakeup(struct ath9k_htc_priv *priv);
void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv);
void ath9k_ps_work(struct work_struct *work);
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+ enum ath9k_power_mode mode);
void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv);
void ath9k_init_leds(struct ath9k_htc_priv *priv);
u16 devid, char *product);
void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug);
#ifdef CONFIG_PM
+void ath9k_htc_suspend(struct htc_target *htc_handle);
int ath9k_htc_resume(struct htc_target *htc_handle);
#endif
#ifdef CONFIG_ATH9K_HTC_DEBUGFS
case 0x7010:
case 0x7015:
case 0x9018:
+ case 0xA704:
+ case 0x1200:
priv->htc->credits = 45;
break;
default:
}
#ifdef CONFIG_PM
+
+void ath9k_htc_suspend(struct htc_target *htc_handle)
+{
+ ath9k_htc_setpower(htc_handle->drv_priv, ATH9K_PM_FULL_SLEEP);
+}
+
int ath9k_htc_resume(struct htc_target *htc_handle)
{
int ret;
return mode;
}
-static bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
- enum ath9k_power_mode mode)
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+ enum ath9k_power_mode mode)
{
bool ret;
tx_hdr.data_type = ATH9K_HTC_NORMAL;
}
- if (ieee80211_is_data(fc)) {
+ if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
}
val = REG_READ(ah, AR7010_GPIO_IN);
return (MS(val, AR7010_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) == 0;
} else if (AR_SREV_9300_20_OR_LATER(ah))
- return MS_REG_READ(AR9300, gpio) != 0;
+ return (MS(REG_READ(ah, AR_GPIO_IN), AR9300_GPIO_IN_VAL) &
+ AR_GPIO_BIT(gpio)) != 0;
else if (AR_SREV_9271(ah))
return MS_REG_READ(AR9271, gpio) != 0;
else if (AR_SREV_9287_11_OR_LATER(ah))
*/
#include <linux/slab.h>
-#include <linux/pm_qos_params.h>
#include "ath9k.h"
.write = ath9k_iowrite32,
};
-struct pm_qos_request_list ath9k_pm_qos_req;
-
/**************************/
/* Initialization */
/**************************/
hw->flags |= IEEE80211_HW_MFP_CAPABLE;
hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_STATION) |
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
- pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+ pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
return 0;
ath9k_ps_wakeup(sc);
- pm_qos_remove_request(&ath9k_pm_qos_req);
-
wiphy_rfkill_stop_polling(sc->hw->wiphy);
ath_deinit_leds(sc);
}
ieee80211_unregister_hw(hw);
+ pm_qos_remove_request(&sc->pm_qos_req);
ath_rx_cleanup(sc);
ath_tx_cleanup(sc);
ath9k_deinit_softc(sc);
rs->rs_phyerr = phyerr;
} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
- else if ((ads.ds_rxstatus8 & AR_MichaelErr) &&
- rs->rs_keyix != ATH9K_RXKEYIX_INVALID)
+ else if (ads.ds_rxstatus8 & AR_MichaelErr)
rs->rs_status |= ATH9K_RXERR_MIC;
else if (ads.ds_rxstatus8 & AR_KeyMiss)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
*/
#include <linux/nl80211.h>
-#include <linux/pm_qos_params.h>
#include "ath9k.h"
#include "btcoex.h"
* the relevant bits of the h/w.
*/
ath9k_hw_set_interrupts(ah, 0);
- ath_drain_all_txq(sc, false);
+ stopped = ath_drain_all_txq(sc, false);
spin_lock_bh(&sc->rx.pcu_lock);
- stopped = ath_stoprecv(sc);
+ if (!ath_stoprecv(sc))
+ stopped = false;
/* XXX: do not flush receive queue here. We don't want
* to flush data frames already in queue because of
ath9k_btcoex_timer_resume(sc);
}
- pm_qos_update_request(&ath9k_pm_qos_req, 55);
+ pm_qos_update_request(&sc->pm_qos_req, 55);
mutex_unlock:
mutex_unlock(&sc->mutex);
sc->sc_flags |= SC_OP_INVALID;
- pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+ pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
mutex_unlock(&sc->mutex);
struct ath_softc *sc = aphy->sc;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_vif *avp = (void *)vif->drv_priv;
- int i;
ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+ /* Disable SWBA interrupt */
+ sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
ath9k_ps_restore(sc);
+ tasklet_kill(&sc->bcon_tasklet);
}
ath_beacon_return(sc, avp);
sc->sc_flags &= ~SC_OP_BEACONS;
- for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
- if (sc->beacon.bslot[i] == vif) {
- printk(KERN_DEBUG "%s: vif had allocated beacon "
- "slot\n", __func__);
- sc->beacon.bslot[i] = NULL;
- sc->beacon.bslot_aphy[i] = NULL;
- }
+ if (sc->nbcnvifs) {
+ /* Re-enable SWBA interrupt */
+ sc->sc_ah->imask |= ATH9K_INT_SWBA;
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+ ath9k_ps_restore(sc);
}
sc->nvifs--;
bool stopped;
spin_lock_bh(&sc->rx.rxbuflock);
- ath9k_hw_stoppcurecv(ah);
+ ath9k_hw_abortpcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
stopped = ath9k_hw_stopdmarecv(ah);
struct ath_rx_status *rx_stats,
bool *decrypt_error)
{
+#define is_mc_or_valid_tkip_keyix ((is_mc || \
+ (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \
+ test_bit(rx_stats->rs_keyix, common->tkip_keymap))))
+
struct ath_hw *ah = common->ah;
__le16 fc;
u8 rx_status_len = ah->caps.rx_status_len;
if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
*decrypt_error = true;
} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+ bool is_mc;
/*
* The MIC error bit is only valid if the frame
* is not a control frame or fragment, and it was
* decrypted using a valid TKIP key.
*/
+ is_mc = !!is_multicast_ether_addr(hdr->addr1);
+
if (!ieee80211_is_ctl(fc) &&
!ieee80211_has_morefrags(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
- test_bit(rx_stats->rs_keyix, common->tkip_keymap))
+ is_mc_or_valid_tkip_keyix)
rxs->flag |= RX_FLAG_MMIC_ERROR;
else
rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
#define AR_DEVID_7010(_ah) \
(((_ah)->hw_version.devid == 0x7010) || \
((_ah)->hw_version.devid == 0x7015) || \
- ((_ah)->hw_version.devid == 0x9018))
+ ((_ah)->hw_version.devid == 0x9018) || \
+ ((_ah)->hw_version.devid == 0xA704) || \
+ ((_ah)->hw_version.devid == 0x1200))
+
+#define AR9287_HTC_DEVID(_ah) \
+ (((_ah)->hw_version.devid == 0x7015) || \
+ ((_ah)->hw_version.devid == 0x1200))
#define AR_RADIO_SREV_MAJOR 0xf0
#define AR_RAD5133_SREV_MAJOR 0xc0
#define AR9287_GPIO_IN_VAL_S 11
#define AR9271_GPIO_IN_VAL 0xFFFF0000
#define AR9271_GPIO_IN_VAL_S 16
-#define AR9300_GPIO_IN_VAL 0x0001FFFF
-#define AR9300_GPIO_IN_VAL_S 0
#define AR7010_GPIO_IN_VAL 0x0000FFFF
#define AR7010_GPIO_IN_VAL_S 0
+#define AR_GPIO_IN 0x404c
+#define AR9300_GPIO_IN_VAL 0x0001FFFF
+#define AR9300_GPIO_IN_VAL_S 0
+
#define AR_GPIO_OE_OUT (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c)
#define AR_GPIO_OE_OUT_DRV 0x3
#define AR_GPIO_OE_OUT_DRV_NO 0x0
}
}
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int i, npend = 0;
if (sc->sc_flags & SC_OP_INVALID)
- return;
+ return true;
/* Stop beacon queue */
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
}
}
- if (npend) {
- int r;
-
- ath_print(common, ATH_DBG_FATAL,
- "Failed to stop TX DMA. Resetting hardware!\n");
-
- spin_lock_bh(&sc->sc_resetlock);
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
- if (r)
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset hardware; reset status %d\n",
- r);
- spin_unlock_bh(&sc->sc_resetlock);
- }
+ if (npend)
+ ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA!\n");
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ATH_TXQ_SETUP(sc, i))
ath_draintxq(sc, &sc->tx.txq[i], retry_tx);
}
+
+ return !npend;
}
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
if (SUPP(CARL9170FW_WLANTX_CAB)) {
ar->hw->wiphy->interface_modes |=
- BIT(NL80211_IFTYPE_AP);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO);
}
}
}
unlock:
- if (err && (vif_id != -1)) {
+ if (err && (vif_id >= 0)) {
vif_priv->active = false;
bitmap_release_region(&ar->vif_bitmap, vif_id, 0);
ar->vifs--;
* supports these modes. The code which will add the
* additional interface_modes is in fw.c.
*/
- hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT);
hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
AR9170_TX_MAC_BACKOFF);
- mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &&
+ mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &
AR9170_TX_MAC_QOS);
no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
usb_free_urb(urb);
}
- ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ);
+ ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
if (ret == 0)
err = -ETIMEDOUT;
/* lets wait a while until the tx - queues are dried out */
- ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ);
+ ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
if (ret == 0)
err = -ETIMEDOUT;
err_free_ssb:
kfree(sdio);
err_disable_func:
+ sdio_claim_host(func);
sdio_disable_func(func);
err_release_host:
sdio_release_host(func);
SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops);
- netif_stop_queue(dev);
}
static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked)
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.ht_params = &iwl1000_ht_params,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl100_bg_cfg = {
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
+ .use_new_eeprom_reading = true,
};
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2a_2abg_cfg = {
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2a_2bg_cfg = {
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2agn_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2abg_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2bgn_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2bg_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_bgn_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_bg_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
/*
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl130_bg_cfg = {
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .use_new_eeprom_reading = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
/**
* iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
*/
-void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
+static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv)
{
int eeprom_section_count = 0;
int section, element;
* always check for valid entry before process
* the information
*/
- if (!enhanced_txpower->common || enhanced_txpower->reserved)
+ if (!(enhanced_txpower->flags || enhanced_txpower->channel) ||
+ enhanced_txpower->delta_20_in_40)
continue;
for (element = 0; element < eeprom_section_count; element++) {
}
}
}
+
+static void
+iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *txp,
+ s8 max_txpower_avg)
+{
+ int ch_idx;
+ bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ;
+ enum ieee80211_band band;
+
+ band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
+ IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
+
+ for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) {
+ struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx];
+
+ /* update matching channel or from common data only */
+ if (txp->channel != 0 && ch_info->channel != txp->channel)
+ continue;
+
+ /* update matching band only */
+ if (band != ch_info->band)
+ continue;
+
+ if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) {
+ ch_info->max_power_avg = max_txpower_avg;
+ ch_info->curr_txpow = max_txpower_avg;
+ ch_info->scan_power = max_txpower_avg;
+ }
+
+ if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg)
+ ch_info->ht40_max_power_avg = max_txpower_avg;
+ }
+}
+
+#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
+#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
+#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
+
+static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
+{
+ struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
+ int idx, entries;
+ __le16 *txp_len;
+ s8 max_txp_avg, max_txp_avg_halfdbm;
+
+ BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
+
+ /* the length is in 16-bit words, but we want entries */
+ txp_len = (__le16 *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_SZ_OFFS);
+ entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
+
+ txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
+ for (idx = 0; idx < entries; idx++) {
+ txp = &txp_array[idx];
+
+ /* skip invalid entries */
+ if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
+ continue;
+
+ max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
+ &max_txp_avg_halfdbm);
+
+ /*
+ * Update the user limit values values to the highest
+ * power supported by any channel
+ */
+ if (max_txp_avg > priv->tx_power_user_lmt)
+ priv->tx_power_user_lmt = max_txp_avg;
+ if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm)
+ priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm;
+
+ iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
+ }
+}
+
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
+{
+ if (priv->cfg->use_new_eeprom_reading)
+ iwlcore_eeprom_enhanced_txpower_new(priv);
+ else
+ iwlcore_eeprom_enhanced_txpower_old(priv);
+}
case INDIRECT_REGULATORY:
offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
break;
+ case INDIRECT_TXP_LIMIT:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT);
+ break;
+ case INDIRECT_TXP_LIMIT_SIZE:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE);
+ break;
case INDIRECT_CALIBRATION:
offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
break;
const bool need_temp_offset_calib; /* if used set to true */
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
+ const bool use_new_eeprom_reading; /* temporary, remove later */
};
/***************************
s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
} __packed;
+enum iwl_eeprom_enhanced_txpwr_flags {
+ IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
+ IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
+ IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
+ IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
+ IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
+ IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
+ IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
+ IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
+};
+
/**
* iwl_eeprom_enhanced_txpwr structure
* This structure presents the enhanced regulatory tx power limit layout
* Enhanced regulatory tx power portion of eeprom image can be broken down
* into individual structures; each one is 8 bytes in size and contain the
* following information
- * @common: (desc + channel) not used by driver, should _NOT_ be "zero"
+ * @flags: entry flags
+ * @channel: channel number
* @chain_a_max_pwr: chain a max power in 1/2 dBm
* @chain_b_max_pwr: chain b max power in 1/2 dBm
* @chain_c_max_pwr: chain c max power in 1/2 dBm
- * @reserved: not used, should be "zero"
+ * @delta_20_in_40: 20-in-40 deltas (hi/lo)
* @mimo2_max_pwr: mimo2 max power in 1/2 dBm
* @mimo3_max_pwr: mimo3 max power in 1/2 dBm
*
*/
struct iwl_eeprom_enhanced_txpwr {
- __le16 common;
+ u8 flags;
+ u8 channel;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
- s8 reserved;
+ u8 delta_20_in_40;
s8 mimo2_max;
s8 mimo3_max;
} __packed;
#define EEPROM_LINK_CALIBRATION (2*0x67)
#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
#define EEPROM_LINK_OTHERS (2*0x69)
+#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
+#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
/* agn regulatory - indirect access */
#define EEPROM_REG_BAND_1_CHANNELS ((0x08)\
#define INDIRECT_CALIBRATION 0x00040000
#define INDIRECT_PROCESS_ADJST 0x00050000
#define INDIRECT_OTHERS 0x00060000
+#define INDIRECT_TXP_LIMIT 0x00070000
+#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
#define INDIRECT_ADDRESS 0x00100000
/* General */
print_ssid(ssid_buf, ssid, ssid_len),
LBS_SCAN_RSSI_TO_MBM(rssi)/100);
- if (channel ||
+ if (channel &&
!(channel->flags & IEEE80211_CHAN_DISABLED))
cfg80211_inform_bss(wiphy, channel,
bssid, le64_to_cpu(*(__le64 *)tsfdesc),
lbs_deb_sdio("call remove card\n");
lbs_stop_card(card->priv);
lbs_remove_card(card->priv);
- card->priv->surpriseremoved = 1;
flush_workqueue(card->workqueue);
destroy_workqueue(card->workqueue);
lbs_stop_card(priv);
lbs_remove_card(priv); /* will call free_netdev */
- priv->surpriseremoved = 1;
free_irq(spi->irq, card);
if_spi_terminate_spi_thread(card);
if (card->pdata->teardown)
lbs_free_adapter(priv);
lbs_cfg_free(priv);
-
- priv->dev = NULL;
free_netdev(dev);
lbs_deb_leave(LBS_DEB_MAIN);
orinoco_add_hostscan_results(priv, buf, len);
kfree(buf);
- } else if (priv->scan_request) {
+ } else {
/* Either abort or complete the scan */
- cfg80211_scan_done(priv->scan_request, (len < 0));
- priv->scan_request = NULL;
+ orinoco_scan_done(priv, (len < 0));
}
spin_lock_irqsave(&priv->scan_lock, flags);
hermes_write_regn(hw, EVACK, 0xffff);
}
+ orinoco_scan_done(priv, true);
+
/* firmware will have to reassociate */
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
orinoco_unlock(priv, &flags);
/* Scanning support: Notify scan cancellation */
- if (priv->scan_request) {
- cfg80211_scan_done(priv->scan_request, 1);
- priv->scan_request = NULL;
- }
+ orinoco_scan_done(priv, true);
if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
struct net_device *dev = priv->ndev;
int err = 0;
+ /* If we've called commit, we are reconfiguring or bringing the
+ * interface up. Maintaining countermeasures across this would
+ * be confusing, so note that we've disabled them. The port will
+ * be enabled later in orinoco_commit or __orinoco_up. */
+ priv->tkip_cm_active = 0;
+
err = orinoco_hw_program_rids(priv);
/* FIXME: what about netif_tx_lock */
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
#include <linux/fcntl.h>
#include <linux/spinlock.h>
#include <linux/list.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/timer.h>
priv->scan_request = NULL;
}
}
+
+void orinoco_scan_done(struct orinoco_private *priv, bool abort)
+{
+ if (priv->scan_request) {
+ cfg80211_scan_done(priv->scan_request, abort);
+ priv->scan_request = NULL;
+ }
+}
void orinoco_add_hostscan_results(struct orinoco_private *dev,
unsigned char *buf,
size_t len);
+void orinoco_scan_done(struct orinoco_private *priv, bool abort);
#endif /* _ORINOCO_SCAN_H_ */
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
*/
if (param->value) {
priv->tkip_cm_active = 1;
- ret = hermes_enable_port(hw, 0);
+ ret = hermes_disable_port(hw, 0);
} else {
priv->tkip_cm_active = 0;
- ret = hermes_disable_port(hw, 0);
+ ret = hermes_enable_port(hw, 0);
}
break;
static struct usb_device_id p54u_table[] __devinitdata = {
/* Version 1 devices (pci chip + net2280) */
+ {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
{USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
{USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
{USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
{USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */
+ {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */
{USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */
{USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+ {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */
+ {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */
{USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */
+ {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */
{USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */
{USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */
{USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
+ {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */
{USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
{USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
DRIVER_REQUIRE_COPY_IV,
DRIVER_REQUIRE_L2PAD,
DRIVER_REQUIRE_TXSTATUS_FIFO,
+ DRIVER_REQUIRE_TASKLET_CONTEXT,
/*
* Driver features
* through a mac80211 library call (RTS/CTS) then we should not
* send the status report back.
*/
- if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
- ieee80211_tx_status(rt2x00dev->hw, entry->skb);
- else
+ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
+ if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags))
+ ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+ } else
dev_kfree_skb_any(entry->skb);
/*
#define GRANT_INVALID_REF 0
-#define NET_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
-#define NET_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
+#define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
struct netfront_info {
}
for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
+ struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz + 2);
yp->rx_skbuff[i] = skb;
if (skb == NULL)
break;
for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
entry = yp->dirty_rx % RX_RING_SIZE;
if (yp->rx_skbuff[entry] == NULL) {
- struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
+ struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz + 2);
if (skb == NULL)
break; /* Better luck next round. */
yp->rx_skbuff[entry] = skb;
info.of_node = of_node_get(node);
info.archdata = &dev_ad;
- request_module("%s", info.type);
+ request_module("%s%s", I2C_MODULE_PREFIX, info.type);
result = i2c_new_device(adap, &info);
if (result == NULL) {
.name = "GSC-PCI",
.unmask = dino_unmask_irq,
.mask = dino_mask_irq,
- .ack = no_ack_irq,
};
.name = "EISA",
.unmask = eisa_unmask_irq,
.mask = eisa_mask_irq,
- .ack = no_ack_irq,
};
static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
setup_irq(2, &irq2_action);
for (i = 0; i < 16; i++) {
set_irq_chip_and_handler(i, &eisa_interrupt_type,
- handle_level_irq);
+ handle_simple_irq);
}
EISA_bus = 1;
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <asm/io.h>
#include <asm/uaccess.h>
.name = "GSC-ASIC",
.unmask = gsc_asic_unmask_irq,
.mask = gsc_asic_mask_irq,
- .ack = no_ack_irq,
};
int gsc_assign_irq(struct irq_chip *type, void *data)
if (irq > GSC_IRQ_MAX)
return NO_IRQ;
- set_irq_chip_and_handler(irq, type, handle_level_irq);
+ set_irq_chip_and_handler(irq, type, handle_simple_irq);
set_irq_chip_data(irq, data);
return irq++;
DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
vi->eoi_addr, vi->eoi_data);
iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+static void iosapic_eoi_irq(unsigned int irq)
+{
+ struct vector_info *vi = get_irq_chip_data(irq);
+
+ iosapic_eoi(vi->eoi_addr, vi->eoi_data);
cpu_eoi_irq(irq);
}
.unmask = iosapic_unmask_irq,
.mask = iosapic_mask_irq,
.ack = cpu_ack_irq,
+ .eoi = iosapic_eoi_irq,
#ifdef CONFIG_SMP
.set_affinity = iosapic_set_affinity_irq,
#endif
static unsigned int led_lanrxtx __read_mostly = 1;
static char lcd_text[32] __read_mostly;
static char lcd_text_default[32] __read_mostly;
+static int lcd_no_led_support __read_mostly = 0; /* KittyHawk doesn't support LED on its LCD */
static struct workqueue_struct *led_wq;
.lcd_width = 16,
.lcd_cmd_reg_addr = KITTYHAWK_LCD_CMD,
.lcd_data_reg_addr = KITTYHAWK_LCD_DATA,
- .min_cmd_delay = 40,
+ .min_cmd_delay = 80,
.reset_cmd1 = 0x80,
.reset_cmd2 = 0xc0,
};
/* Display the default text now */
if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
+ /* KittyHawk has no LED support on its LCD */
+ if (lcd_no_led_support) return 0;
+
/* Create the work queue and queue the LED task */
led_wq = create_singlethread_workqueue("led_wq");
queue_delayed_work(led_wq, &led_task, 0);
proc_pdc_root = proc_mkdir("pdc", 0);
if (!proc_pdc_root) return -1;
- ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
- &led_proc_fops, (void *)LED_NOLCD); /* LED */
- if (!ent) return -1;
+
+ if (!lcd_no_led_support)
+ {
+ ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
+ &led_proc_fops, (void *)LED_NOLCD); /* LED */
+ if (!ent) return -1;
+ }
if (led_type == LED_HASLCD)
{
case 0x58B: /* KittyHawk DC2 100 (K200) */
printk(KERN_INFO "%s: KittyHawk-Machine (hversion 0x%x) found, "
"LED detection skipped.\n", __FILE__, CPU_HVERSION);
+ lcd_no_led_support = 1;
goto found; /* use the preinitialized values of lcd_info */
}
.name = SUPERIO,
.unmask = superio_unmask_irq,
.mask = superio_mask_irq,
- .ack = no_ack_irq,
};
#ifdef DEBUG_SUPERIO_INIT
#endif
for (i = 0; i < 16; i++) {
- set_irq_chip_and_handler(i, &superio_interrupt_type, handle_level_irq);
+ set_irq_chip_and_handler(i, &superio_interrupt_type, handle_simple_irq);
}
/*
obj-$(CONFIG_X86_VISWS) += setup-irq.o
obj-$(CONFIG_MN10300) += setup-bus.o
obj-$(CONFIG_MICROBLAZE) += setup-bus.o
+obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
#
# ACPI Related PCI FW Functions
}
}
-/*
- * Find the highest-address bus resource below the cursor "res". If the
- * cursor is NULL, return the highest resource.
- */
-static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
- unsigned int type,
- struct resource *res)
-{
- struct resource *r, *prev = NULL;
- int i;
-
- pci_bus_for_each_resource(bus, r, i) {
- if (!r)
- continue;
-
- if ((r->flags & IORESOURCE_TYPE_BITS) != type)
- continue;
-
- /* If this resource is at or past the cursor, skip it */
- if (res) {
- if (r == res)
- continue;
- if (r->end > res->end)
- continue;
- if (r->end == res->end && r->start > res->start)
- continue;
- }
-
- if (!prev)
- prev = r;
-
- /*
- * A small resource is higher than a large one that ends at
- * the same address.
- */
- if (r->end > prev->end ||
- (r->end == prev->end && r->start > prev->start))
- prev = r;
- }
-
- return prev;
-}
-
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
* @bus: PCI bus
resource_size_t),
void *alignf_data)
{
- int ret = -ENOMEM;
+ int i, ret = -ENOMEM;
struct resource *r;
resource_size_t max = -1;
- unsigned int type = res->flags & IORESOURCE_TYPE_BITS;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
if (!(res->flags & IORESOURCE_MEM_64))
max = PCIBIOS_MAX_MEM_32;
- /* Look for space at highest addresses first */
- r = pci_bus_find_resource_prev(bus, type, NULL);
- for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) {
+ pci_bus_for_each_resource(bus, r, i) {
+ if (!r)
+ continue;
+
/* type_mask must match */
if ((res->flags ^ r->flags) & type_mask)
continue;
(unsigned long long)drhd->reg_base_addr, ret);
return -1;
}
+
+ /*
+ * Clear any previous faults.
+ */
+ dmar_fault(iommu->irq, iommu);
}
return 0;
for (;;) {
offset = next_offset;
+
+ /* Make sure what we read is still in the mapped section */
+ if (WARN(offset > (ebda_sz * 1024 - 4),
+ "ibmphp_ebda: next read is beyond ebda_sz\n"))
+ break;
+
next_offset = readw (io_mem + offset); /* offset of next blk */
offset += 2;
static int __init select_detection_mode(void)
{
struct dummy_slot *slot, *tmp;
- pcie_port_service_register(&dummy_driver);
+ if (pcie_port_service_register(&dummy_driver))
+ return PCIEHP_DETECT_ACPI;
pcie_port_service_unregister(&dummy_driver);
list_for_each_entry_safe(slot, tmp, &dummy_slots, list) {
list_del(&slot->list);
#ifdef HAVE_PCI_MMAP
-int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
+ enum pci_mmap_api mmap_api)
{
- unsigned long nr, start, size;
+ unsigned long nr, start, size, pci_start;
+ if (pci_resource_len(pdev, resno) == 0)
+ return 0;
nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
- if (start < size && size - start >= nr)
+ pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
+ pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+ if (start >= pci_start && start < pci_start + size &&
+ start + nr <= pci_start + size)
return 1;
- WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
- current->comm, start, start+nr, pci_name(pdev), resno, size);
return 0;
}
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
- if (!pci_mmap_fits(pdev, i, vma))
+ if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+ WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
+ "at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
+ current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
+ pci_name(pdev), i,
+ (u64)pci_resource_start(pdev, i),
+ (u64)pci_resource_len(pdev, i));
return -EINVAL;
+ }
/* pci_mmap_page_range() expects the same kind of entry as coming
* from /proc/bus/pci/ which is a "user visible" value. If this is
int err;
int i, bars = 0;
+ /*
+ * Power state could be unknown at this point, either due to a fresh
+ * boot or a device removal call. So get the current power state
+ * so that things like MSI message writing will behave as expected
+ * (e.g. if the device really is in D0 at enable time).
+ */
+ if (dev->pm_cap) {
+ u16 pmcsr;
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ }
+
if (atomic_add_return(1, &dev->enable_cnt) > 1)
return 0; /* already enabled */
#endif
extern void pci_cleanup_rom(struct pci_dev *dev);
#ifdef HAVE_PCI_MMAP
+enum pci_mmap_api {
+ PCI_MMAP_SYSFS, /* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
+ PCI_MMAP_PROCFS /* mmap on /proc/bus/pci/<BDF> */
+};
extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
- struct vm_area_struct *vma);
+ struct vm_area_struct *vmai,
+ enum pci_mmap_api mmap_api);
#endif
int pci_probe_reset_function(struct pci_dev *dev);
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/capability.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
/* Make sure the caller is mapping a real resource for this device */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- if (pci_mmap_fits(dev, i, vma))
+ if (pci_mmap_fits(dev, i, vma, PCI_MMAP_PROCFS))
break;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
quirk_unhide_mch_dev6);
+#ifdef CONFIG_TILE
+/*
+ * The Tilera TILEmpower platform needs to set the link speed
+ * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
+ * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
+ * capability register of the PEX8624 PCIe switch. The switch
+ * supports link speed auto negotiation, but falsely sets
+ * the link speed to 5GT/s.
+ */
+static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
+{
+ if (tile_plx_gen1) {
+ pci_write_config_dword(dev, 0x98, 0x1);
+ mdelay(50);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
+#endif /* CONFIG_TILE */
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
{
u32 cfg;
+ if (!pci_find_capability(dev, PCI_CAP_ID_HT))
+ return;
+
pci_read_config_dword(dev, 0x74, &cfg);
if (cfg & ((1 << 2) | (1 << 15))) {
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
+#define VTUNCERRMSK_REG 0x1ac
+#define VTD_MSK_SPEC_ERRORS (1 << 31)
+/*
+ * This is a quirk for masking vt-d spec defined errors to platform error
+ * handling logic. With out this, platforms using Intel 7500, 5500 chipsets
+ * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
+ * on the RAS config settings of the platform) when a vt-d fault happens.
+ * The resulting SMI caused the system to hang.
+ *
+ * VT-d spec related errors are already handled by the VT-d OS code, so no
+ * need to report the same error through other channels.
+ */
+static void vtd_mask_spec_errors(struct pci_dev *dev)
+{
+ u32 word;
+
+ pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
+ pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
+#endif
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
va_end(args);
}
}
+EXPORT_SYMBOL(soc_pcmcia_debug);
#endif
static int wlan_status = 1;
static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
module_param(wlan_status, int, 0444);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
/*
* Some events we use, same for all Asus
*/
*/
#define WL_RSTS 0x01 /* internal Wifi */
#define BT_RSTS 0x02 /* internal Bluetooth */
+#define WM_RSTS 0x08 /* internal wimax */
+#define WW_RSTS 0x20 /* internal wwan */
/* LED */
#define METHOD_MLED "MLED"
*/
#define METHOD_WLAN "WLED"
#define METHOD_BLUETOOTH "BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN "GSMC"
+#define METHOD_WIMAX "WMXC"
+
#define METHOD_WL_STATUS "RSTS"
/* Brightness */
return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH);
}
+/*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+ pr_warning("Error setting wimax status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wimax(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t store_wimax(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+ pr_warning("Error setting wwan status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wwan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t store_wwan(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+
/*
* Display
*/
static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan);
static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR,
show_bluetooth, store_bluetooth);
+static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax);
+static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp);
static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
&dev_attr_infos.attr,
&dev_attr_wlan.attr,
&dev_attr_bluetooth.attr,
+ &dev_attr_wimax.attr,
+ &dev_attr_wwan.attr,
&dev_attr_display.attr,
&dev_attr_ledd.attr,
&dev_attr_ls_level.attr,
} else if (attr == &dev_attr_display.attr) {
supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
+ } else if (attr == &dev_attr_wimax.attr) {
+ supported =
+ !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+ } else if (attr == &dev_attr_wwan.attr) {
+ supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
} else if (attr == &dev_attr_ledd.attr) {
supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
/*
* The HWRS method return informations about the hardware.
- * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth,
+ * 0x40 for WWAN, 0x10 for WIMAX.
* The significance of others is yet to be found.
*/
status =
if (wlan_status >= 0)
asus_wlan_set(asus, !!wlan_status);
+ if (wimax_status >= 0)
+ asus_wimax_set(asus, !!wimax_status);
+
+ if (wwan_status >= 0)
+ asus_wwan_set(asus, !!wwan_status);
+
/* Keyboard Backlight is on by default */
if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
asus_kled_set(asus, 1);
kfree(obj);
}
-static int store_cpufv(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
int value;
struct acpi_buffer input = { (acpi_size)sizeof(value), &value };
bios_return = *((struct bios_return *)obj->buffer.pointer);
memcpy(buffer, &bios_return.value, sizeof(bios_return.value));
+
+ kfree(obj);
return 0;
}
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/dmi.h>
+#include <linux/efi.h>
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
sysdev_class_unregister(&class_rtl);
}
-static int dmi_check_cb(const struct dmi_system_id *id)
-{
- RTL_DEBUG("found IBM server '%s'\n", id->ident);
- return 0;
-}
-
-#define ibm_dmi_entry(NAME, TYPE) \
-{ \
- .ident = NAME, \
- .matches = { \
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
- DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \
- }, \
- .callback = dmi_check_cb \
-}
static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = {
- ibm_dmi_entry("BladeCenter LS21", "7971"),
- ibm_dmi_entry("BladeCenter LS22", "7901"),
- ibm_dmi_entry("BladeCenter HS21 XM", "7995"),
- ibm_dmi_entry("BladeCenter HS22", "7870"),
- ibm_dmi_entry("BladeCenter HS22V", "7871"),
- ibm_dmi_entry("System x3550 M2", "7946"),
- ibm_dmi_entry("System x3650 M2", "7947"),
- ibm_dmi_entry("System x3550 M3", "7944"),
- ibm_dmi_entry("System x3650 M3", "7945"),
+ { \
+ .matches = { \
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
+ }, \
+ },
{ }
};
if (force)
pr_warning("ibm-rtl: module loaded by force\n");
/* first ensure that we are running on IBM HW */
- else if (!dmi_check_system(ibm_rtl_dmi_table))
+ else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
return -ENODEV;
/* Get the address for the Extended BIOS Data Area */
RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
rtl_cmd_width, rtl_cmd_type);
addr = ioread32(&rtl_table->cmd_port_address);
- RTL_DEBUG("addr = %#llx\n", addr);
+ RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
plen = rtl_cmd_width/sizeof(char);
rtl_cmd_addr = rtl_port_map(addr, plen);
RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
#include <drm/i915_drm.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include "intel_ips.h"
#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
#define thm_writel(off, val) writel((val), ips->regmap + (off))
static const int IPS_ADJUST_PERIOD = 5000; /* ms */
+static bool late_i915_load = false;
/* For initial average collection */
static const int IPS_SAMPLE_PERIOD = 200; /* ms */
u64 orig_turbo_ratios;
};
+static bool
+ips_gpu_turbo_enabled(struct ips_driver *ips);
+
/**
* ips_cpu_busy - is CPU busy?
* @ips: IPS driver struct
*/
static bool ips_gpu_busy(struct ips_driver *ips)
{
- if (!ips->gpu_turbo_enabled)
+ if (!ips_gpu_turbo_enabled(ips))
return false;
return ips->gpu_busy();
*/
static void ips_gpu_raise(struct ips_driver *ips)
{
- if (!ips->gpu_turbo_enabled)
+ if (!ips_gpu_turbo_enabled(ips))
return;
if (!ips->gpu_raise())
*/
static void ips_gpu_lower(struct ips_driver *ips)
{
- if (!ips->gpu_turbo_enabled)
+ if (!ips_gpu_turbo_enabled(ips))
return;
if (!ips->gpu_lower())
return false;
}
+static bool
+ips_gpu_turbo_enabled(struct ips_driver *ips)
+{
+ if (!ips->gpu_busy && late_i915_load) {
+ if (ips_get_i915_syms(ips)) {
+ dev_info(&ips->dev->dev,
+ "i915 driver attached, reenabling gpu turbo\n");
+ ips->gpu_turbo_enabled = !(thm_readl(THM_HTS) & HTS_GTD_DIS);
+ }
+ }
+
+ return ips->gpu_turbo_enabled;
+}
+
+void
+ips_link_to_i915_driver()
+{
+ /* We can't cleanly get at the various ips_driver structs from
+ * this caller (the i915 driver), so just set a flag saying
+ * that it's time to try getting the symbols again.
+ */
+ late_i915_load = true;
+}
+EXPORT_SYMBOL_GPL(ips_link_to_i915_driver);
+
static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_THERMAL_SENSOR), },
--- /dev/null
+/*
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+void ips_link_to_i915_driver(void);
#define dprintk(msg...) pr_debug(DRV_PFX msg)
-#define KEYCODE_BASE 0xD0
-#define MSI_WMI_BRIGHTNESSUP KEYCODE_BASE
-#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1)
-#define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2)
-#define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3)
+#define SCANCODE_BASE 0xD0
+#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE
+#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
+#define MSI_WMI_VOLUMEUP (SCANCODE_BASE + 2)
+#define MSI_WMI_VOLUMEDOWN (SCANCODE_BASE + 3)
+#define MSI_WMI_MUTE (SCANCODE_BASE + 4)
static struct key_entry msi_wmi_keymap[] = {
{ KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} },
{ KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} },
{ KE_KEY, MSI_WMI_VOLUMEUP, {KEY_VOLUMEUP} },
{ KE_KEY, MSI_WMI_VOLUMEDOWN, {KEY_VOLUMEDOWN} },
+ { KE_KEY, MSI_WMI_MUTE, {KEY_MUTE} },
{ KE_END, 0}
};
static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
ktime_t diff;
cur = ktime_get_real();
diff = ktime_sub(cur, last_pressed[key->code -
- KEYCODE_BASE]);
+ SCANCODE_BASE]);
/* Ignore event if the same event happened in a 50 ms
timeframe -> Key press may result in 10-20 GPEs */
if (ktime_to_us(diff) < 1000 * 50) {
key->code, ktime_to_us(diff));
return;
}
- last_pressed[key->code - KEYCODE_BASE] = cur;
+ last_pressed[key->code - SCANCODE_BASE] = cur;
if (key->type == KE_KEY &&
/* Brightness is served via acpi video driver */
ibm->acpi->type,
dispatch_acpi_notify);
ibm->flags.acpi_notify_installed = 0;
- ibm->flags.acpi_notify_installed = 0;
}
if (ibm->flags.proc_created) {
{ KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
{ KE_KEY, 0x142, { KEY_WLAN } },
{ KE_KEY, 0x143, { KEY_PROG1 } },
+ { KE_KEY, 0x17f, { KEY_FN } },
{ KE_KEY, 0xb05, { KEY_PROG2 } },
{ KE_KEY, 0xb06, { KEY_WWW } },
{ KE_KEY, 0xb07, { KEY_MAIL } },
struct wmi_block *wblock;
list_for_each_entry(wblock, &wmi_block_list, list)
- if (strncmp(wblock->gblock.guid, guid_string, 16) == 0)
+ if (memcmp(wblock->gblock.guid, guid_string, 16) == 0)
return true;
return false;
#include <linux/isapnp.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
extern struct pnp_protocol isapnp_protocol;
};
EXPORT_SYMBOL(pnpacpi_protocol);
-static char *pnpacpi_get_id(struct acpi_device *device)
+static char *__init pnpacpi_get_id(struct acpi_device *device)
{
struct acpi_hardware_id *id;
}
/**
- * set_consumer_device_supply: Bind a regulator to a symbolic supply
+ * set_consumer_device_supply - Bind a regulator to a symbolic supply
* @rdev: regulator source
* @consumer_dev: device the supply applies to
* @consumer_dev_name: dev_name() string for device supply applies to
printk(KERN_WARNING
"%s: could not add device link %s err %d\n",
__func__, dev->kobj.name, err);
- device_remove_file(dev, ®ulator->dev_attr);
goto link_name_err;
}
}
{
int ret, delay;
- /* do we need to enable the supply regulator first */
- if (rdev->supply) {
- ret = _regulator_enable(rdev->supply);
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to enable %s: %d\n",
- __func__, rdev_get_name(rdev), ret);
- return ret;
+ if (rdev->use_count == 0) {
+ /* do we need to enable the supply regulator first */
+ if (rdev->supply) {
+ mutex_lock(&rdev->supply->mutex);
+ ret = _regulator_enable(rdev->supply);
+ mutex_unlock(&rdev->supply->mutex);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ __func__, rdev_get_name(rdev), ret);
+ return ret;
+ }
}
}
if (ret < 0)
return ret;
- if (delay >= 1000)
+ if (delay >= 1000) {
mdelay(delay / 1000);
- else if (delay)
+ udelay(delay % 1000);
+ } else if (delay) {
udelay(delay);
+ }
} else if (ret < 0) {
printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
struct regulator_dev **supply_rdev_ptr)
{
int ret = 0;
+ *supply_rdev_ptr = NULL;
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n",
if (init_data->supply_regulator && init_data->supply_regulator_dev) {
dev_err(dev,
"Supply regulator specified by both name and dev\n");
+ ret = -EINVAL;
goto scrub;
}
if (!found) {
dev_err(dev, "Failed to find supply %s\n",
init_data->supply_regulator);
+ ret = -ENODEV;
goto scrub;
}
.get_voltage = mc13783_fixed_regulator_get_voltage,
};
-int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
- u32 val)
+static int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
+ u32 val)
{
struct mc13783 *mc13783 = priv->mc13783;
int ret;
};
#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
-{ \
+ ereg0, ebit0, ereg1, ebit1) \
.desc = { \
.name = "REG-" #_id, \
.ops = &tps6586x_regulator_##_ops, \
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
.enable_bit[1] = (ebit1), \
- .voltages = tps6586x_##vdata##_voltages, \
-}
+ .voltages = tps6586x_##vdata##_voltages,
+
+#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+ .go_reg = TPS6586X_##goreg, \
+ .go_bit = (gobit),
#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
+{ \
TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, 0, 0)
+ ereg0, ebit0, ereg1, ebit1) \
+}
#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
+{ \
TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, goreg, gobit)
+ ereg0, ebit0, ereg1, ebit1) \
+ TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+}
static struct tps6586x_regulator tps6586x_regulator[] = {
TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
- TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6),
+ TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
- TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1),
+ TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
uint8_t val1, val2;
int ret;
+ if (ri->enable_reg[0] == ri->enable_reg[1] &&
+ ri->enable_bit[0] == ri->enable_bit[1])
+ return 0;
+
ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
if (ret)
return ret;
if (ret)
return ret;
- if (!(val2 & ri->enable_bit[1]))
+ if (!(val2 & (1 << ri->enable_bit[1])))
return 0;
/*
* The regulator is on, but it's enabled with the bit we don't
* want to use, so we switch the enable bits
*/
- if (!(val1 & ri->enable_bit[0])) {
+ if (!(val1 & (1 << ri->enable_bit[0]))) {
ret = tps6586x_set_bits(parent, ri->enable_reg[0],
1 << ri->enable_bit[0]);
if (ret)
return -EACCES;
status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message >> 8, 0x15 /* PB_WORD_MSB */ );
- if (status >= 0)
+ message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
+ if (status < 0)
return status;
return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message, 0x16 /* PB_WORD_LSB */ );
+ message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
}
/*----------------------------------------------------------------------*/
static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
struct rs5c372 *rs5c = i2c_get_clientdata(client);
- unsigned char buf[8];
+ unsigned char buf[7];
int addr;
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
clk_put(rtc->clk);
iounmap(rtc->regbase);
err_badmap:
- release_resource(rtc->res);
+ release_mem_region(rtc->res->start, rtc->regsize);
err_badres:
kfree(rtc);
}
iounmap(rtc->regbase);
- release_resource(rtc->res);
+ release_mem_region(rtc->res->start, rtc->regsize);
clk_disable(rtc->clk);
clk_put(rtc->clk);
#include <linux/device.h>
#include <linux/poll.h>
#include <linux/mutex.h>
-#include <linux/smp_lock.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <linux/smp_lock.h>
#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/mtio.h>
-#include <linux/smp_lock.h>
#include <linux/compat.h>
#include <asm/uaccess.h>
wake_up(&device->state_change_wq);
}
+struct tape_med_state_work_data {
+ struct tape_device *device;
+ enum tape_medium_state state;
+ struct work_struct work;
+};
+
+static void
+tape_med_state_work_handler(struct work_struct *work)
+{
+ static char env_state_loaded[] = "MEDIUM_STATE=LOADED";
+ static char env_state_unloaded[] = "MEDIUM_STATE=UNLOADED";
+ struct tape_med_state_work_data *p =
+ container_of(work, struct tape_med_state_work_data, work);
+ struct tape_device *device = p->device;
+ char *envp[] = { NULL, NULL };
+
+ switch (p->state) {
+ case MS_UNLOADED:
+ pr_info("%s: The tape cartridge has been successfully "
+ "unloaded\n", dev_name(&device->cdev->dev));
+ envp[0] = env_state_unloaded;
+ kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp);
+ break;
+ case MS_LOADED:
+ pr_info("%s: A tape cartridge has been mounted\n",
+ dev_name(&device->cdev->dev));
+ envp[0] = env_state_loaded;
+ kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp);
+ break;
+ default:
+ break;
+ }
+ tape_put_device(device);
+ kfree(p);
+}
+
+static void
+tape_med_state_work(struct tape_device *device, enum tape_medium_state state)
+{
+ struct tape_med_state_work_data *p;
+
+ p = kzalloc(sizeof(*p), GFP_ATOMIC);
+ if (p) {
+ INIT_WORK(&p->work, tape_med_state_work_handler);
+ p->device = tape_get_device(device);
+ p->state = state;
+ schedule_work(&p->work);
+ }
+}
+
void
tape_med_state_set(struct tape_device *device, enum tape_medium_state newstate)
{
- if (device->medium_state == newstate)
+ enum tape_medium_state oldstate;
+
+ oldstate = device->medium_state;
+ if (oldstate == newstate)
return;
+ device->medium_state = newstate;
switch(newstate){
case MS_UNLOADED:
device->tape_generic_status |= GMT_DR_OPEN(~0);
- if (device->medium_state == MS_LOADED)
- pr_info("%s: The tape cartridge has been successfully "
- "unloaded\n", dev_name(&device->cdev->dev));
+ if (oldstate == MS_LOADED)
+ tape_med_state_work(device, MS_UNLOADED);
break;
case MS_LOADED:
device->tape_generic_status &= ~GMT_DR_OPEN(~0);
- if (device->medium_state == MS_UNLOADED)
- pr_info("%s: A tape cartridge has been mounted\n",
- dev_name(&device->cdev->dev));
+ if (oldstate == MS_UNLOADED)
+ tape_med_state_work(device, MS_LOADED);
break;
default:
- // print nothing
break;
}
- device->medium_state = newstate;
wake_up(&device->state_change_wq);
}
#include <linux/kmod.h>
#include <linux/cdev.h>
#include <linux/device.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
MODULE_AUTHOR
char cp_command[80];
char cp_response[160];
char *onoff, *qid_string;
+ int rc;
- memset(cp_command, 0x00, sizeof(cp_command));
- memset(cp_response, 0x00, sizeof(cp_response));
-
- onoff = ((action == 1) ? "ON" : "OFF");
+ onoff = ((action == 1) ? "ON" : "OFF");
qid_string = ((recording_class_AB == 1) ? " QID * " : "");
- /*
+ /*
* The recording commands needs to be called with option QID
* for guests that have previlege classes A or B.
* Purging has to be done as separate step, because recording
* can't be switched on as long as records are on the queue.
* Doing both at the same time doesn't work.
*/
-
- if (purge) {
+ if (purge && (action == 1)) {
+ memset(cp_command, 0x00, sizeof(cp_command));
+ memset(cp_response, 0x00, sizeof(cp_response));
snprintf(cp_command, sizeof(cp_command),
"RECORDING %s PURGE %s",
logptr->recording_name,
qid_string);
-
cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
}
logptr->recording_name,
onoff,
qid_string);
-
cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
/* The recording command will usually answer with 'Command complete'
* on success, but when the specific service was never connected
* before then there might be an additional informational message
* 'HCPCRC8072I Recording entry not found' before the
- * 'Command complete'. So I use strstr rather then the strncmp.
+ * 'Command complete'. So I use strstr rather then the strncmp.
*/
if (strstr(cp_response,"Command complete"))
- return 0;
+ rc = 0;
else
- return -EIO;
+ rc = -EIO;
+ /*
+ * If we turn recording off, we have to purge any remaining records
+ * afterwards, as a large number of queued records may impact z/VM
+ * performance.
+ */
+ if (purge && (action == 0)) {
+ memset(cp_command, 0x00, sizeof(cp_command));
+ memset(cp_response, 0x00, sizeof(cp_response));
+ snprintf(cp_command, sizeof(cp_command),
+ "RECORDING %s PURGE %s",
+ logptr->recording_name,
+ qid_string);
+ cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
+ }
+ return rc;
}
#include <linux/cdev.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
init_subchannel_id(&mchk_schid);
mchk_schid.sch_no = crw0->rsid;
if (crw1)
- mchk_schid.ssid = (crw1->rsid >> 8) & 3;
+ mchk_schid.ssid = (crw1->rsid >> 4) & 3;
/*
* Since we are always presented with IPI in the CRW, we have to
break;
case IO_SCH_UNREG_ATTACH:
case IO_SCH_UNREG:
- if (cdev)
+ if (!cdev)
+ break;
+ if (cdev->private->state == DEV_STATE_SENSE_ID) {
+ /*
+ * Note: delayed work triggered by this event
+ * and repeated calls to sch_event are synchronized
+ * by the above check for work_pending(cdev).
+ */
+ dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
+ } else
ccw_device_set_notoper(cdev);
break;
case IO_SCH_NOP:
return;
/* reset adapter interrupt indicators */
- put_indicator(irq_ptr->dsci);
set_subchannel_ind(irq_ptr, 1);
+ put_indicator(irq_ptr->dsci);
}
void __exit tiqdio_unregister_thinints(void)
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/compat.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
if (!(a_status & ZFCP_STATUS_COMMON_RUNNING) ||
a_status & ZFCP_STATUS_COMMON_ERP_FAILED)
return 0;
+ if (p_status & ZFCP_STATUS_COMMON_NOESC)
+ return need;
if (!(a_status & ZFCP_STATUS_COMMON_UNBLOCKED))
need = ZFCP_ERP_ACTION_REOPEN_ADAPTER;
/* fall through */
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE,
&zfcp_sdev->status);
erp_action = &zfcp_sdev->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+ erp_action->port = port;
+ erp_action->sdev = sdev;
if (!(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
zfcp_erp_action_dismiss_port(port);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &port->status);
erp_action = &port->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+ erp_action->port = port;
if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
break;
zfcp_erp_action_dismiss_adapter(adapter);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &adapter->status);
erp_action = &adapter->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
return NULL;
}
- memset(erp_action, 0, sizeof(struct zfcp_erp_action));
erp_action->adapter = adapter;
- erp_action->port = port;
- erp_action->sdev = sdev;
erp_action->action = need;
erp_action->status = act_status;
zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
- req->data = zfcp_sdev;
+ req->data = sdev;
req->handler = zfcp_fsf_abort_fcp_command_handler;
req->qtcb->header.lun_handle = zfcp_sdev->lun_handle;
req->qtcb->header.port_handle = zfcp_sdev->port->handle;
struct fcp_resp_with_ext *fcp_rsp;
unsigned long flags;
- zfcp_fsf_fcp_handler_common(req);
-
read_lock_irqsave(&req->adapter->abort_lock, flags);
scpnt = req->data;
return;
}
+ zfcp_fsf_fcp_handler_common(req);
+
if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED);
goto skip_fsfstatus;
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
struct zfcp_qdio *qdio = adapter->qdio;
struct fsf_qtcb_bottom_io *io;
+ unsigned long flags;
if (unlikely(!(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_UNBLOCKED)))
return -EBUSY;
- spin_lock(&qdio->req_q_lock);
+ spin_lock_irqsave(&qdio->req_q_lock, flags);
if (atomic_read(&qdio->req_q_free) <= 0) {
atomic_inc(&qdio->req_q_full);
goto out;
zfcp_fsf_req_free(req);
scsi_cmnd->host_scribble = NULL;
out:
- spin_unlock(&qdio->req_q_lock);
+ spin_unlock_irqrestore(&qdio->req_q_lock, flags);
return retval;
}
scpnt->scsi_done(scpnt);
}
-static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt,
- void (*done) (struct scsi_cmnd *))
+static
+int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
/* reset the status for this request */
scpnt->result = 0;
scpnt->host_scribble = NULL;
- scpnt->scsi_done = done;
scsi_result = fc_remote_port_chkready(rport);
if (unlikely(scsi_result)) {
} /* End twa_scsi_eh_reset() */
/* This is the main scsi queue function to handle scsi opcodes */
-static int twa_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
return retval;
} /* End twa_scsi_queue() */
+static DEF_SCSI_QCMD(twa_scsi_queue)
+
/* This function hands scsi cdb's to the firmware */
static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg)
{
} /* End twl_scsi_eh_reset() */
/* This is the main scsi queue function to handle scsi opcodes */
-static int twl_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
return retval;
} /* End twl_scsi_queue() */
+static DEF_SCSI_QCMD(twl_scsi_queue)
+
/* This function tells the controller to shut down */
static void __twl_shutdown(TW_Device_Extension *tw_dev)
{
} /* End tw_scsiop_test_unit_ready_complete() */
/* This is the main scsi queue function to handle scsi opcodes */
-static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
unsigned char *command = SCpnt->cmnd;
int request_id = 0;
return retval;
} /* End tw_scsi_queue() */
+static DEF_SCSI_QCMD(tw_scsi_queue)
+
/* This function is the interrupt service routine */
static irqreturn_t tw_interrupt(int irq, void *dev_instance)
{
#include "53c700_d.h"
-STATIC int NCR_700_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+STATIC int NCR_700_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *);
STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
return IRQ_RETVAL(handled);
}
-STATIC int
-NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
+static int
+NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
{
struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
return 0;
}
+STATIC DEF_SCSI_QCMD(NCR_700_queuecommand)
+
STATIC int
NCR_700_abort(struct scsi_cmnd * SCp)
{
Outgoing Mailbox for execution by the associated Host Adapter.
*/
-static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
+static int BusLogic_QueueCommand_lck(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
{
struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[Command->device->id];
return 0;
}
+static DEF_SCSI_QCMD(BusLogic_QueueCommand)
#if 0
/*
*/
static const char *BusLogic_DriverInfo(struct Scsi_Host *);
-static int BusLogic_QueueCommand(struct scsi_cmnd *, void (*CompletionRoutine) (struct scsi_cmnd *));
+static int BusLogic_QueueCommand(struct Scsi_Host *h, struct scsi_cmnd *);
static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *);
static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int);
static int BusLogic_SlaveConfigure(struct scsi_device *);
* Locks: host lock taken by caller
*/
-static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int NCR5380_queue_command_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
return 0;
}
+static DEF_SCSI_QCMD(NCR5380_queue_command)
/**
* NCR5380_main - NCR state machines
#endif
static int NCR5380_abort(Scsi_Cmnd * cmd);
static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
-static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int __maybe_unused NCR5380_proc_info(struct Scsi_Host *instance,
char *buffer, char **start, off_t offset, int length, int inout);
}
#endif
-static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
{
int i;
return 0;
}
+static DEF_SCSI_QCMD(NCR53c406a_queue)
+
static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
{
DEB(printk("NCR53c406a_reset called\n"));
* queue the command down to the controller
*/
-static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+static int inia100_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
{
struct orc_scb *scb;
struct orc_host *host; /* Point to Host adapter control block */
return 0;
}
+static DEF_SCSI_QCMD(inia100_queue)
+
/*****************************************************************************
Function name : inia100_abort
Description : Abort a queued command.
* TODO: unify with aac_scsi_cmd().
*/
-static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int aac_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct Scsi_Host *host = cmd->device->host;
struct aac_dev *dev = (struct aac_dev *)host->hostdata;
return (aac_scsi_cmd(cmd) ? FAILED : 0);
}
+static DEF_SCSI_QCMD(aac_queuecommand)
+
/**
* aac_info - Returns the host adapter name
* @shost: Scsi host to report on
* in the 'scp' result field.
*/
static int
-advansys_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
{
struct Scsi_Host *shost = scp->device->host;
int asc_res, result = 0;
return result;
}
+static DEF_SCSI_QCMD(advansys_queuecommand)
+
static ushort __devinit AscGetEisaChipCfg(PortAddr iop_base)
{
PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
* queue a command
*
*/
-static int aha152x_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha152x_queue_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
{
#if 0
if(*SCpnt->cmnd == REQUEST_SENSE) {
return aha152x_internal_queue(SCpnt, NULL, 0, done);
}
+static DEF_SCSI_QCMD(aha152x_queue)
+
/*
*
};
}
-static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int aha1542_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
{
unchar ahacmd = CMD_START_SCSI;
unchar direction;
return 0;
}
+static DEF_SCSI_QCMD(aha1542_queuecommand)
+
/* Initialize mailboxes */
static void setup_mailboxes(int bse, struct Scsi_Host *shpnt)
{
};
static int aha1542_detect(struct scsi_host_template *);
-static int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int aha1542_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);
static int aha1542_host_reset(Scsi_Cmnd * SCpnt);
return IRQ_RETVAL(handled);
}
-static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha1740_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
{
unchar direction;
unchar *cmd = (unchar *) SCpnt->cmnd;
return 0;
}
+static DEF_SCSI_QCMD(aha1740_queuecommand)
+
/* Query the board for its irq_level and irq_type. Nothing else matters
in enhanced mode on an EISA bus. */
* Queue an SCB to the controller.
*/
static int
-ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
+ahd_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
{
struct ahd_softc *ahd;
struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
return rtn;
}
+static DEF_SCSI_QCMD(ahd_linux_queue)
+
static struct scsi_target **
ahd_linux_target_in_softc(struct scsi_target *starget)
{
* Queue an SCB to the controller.
*/
static int
-ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
+ahc_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev = scsi_transport_device_data(cmd->device);
return rtn;
}
+static DEF_SCSI_QCMD(ahc_linux_queue)
+
static inline struct scsi_target **
ahc_linux_target_in_softc(struct scsi_target *starget)
{
* Description:
* Queue a SCB to the controller.
*-F*************************************************************************/
-static int aic7xxx_queue(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+static int aic7xxx_queue_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
{
struct aic7xxx_host *p;
struct aic7xxx_scb *scb;
return (0);
}
+static DEF_SCSI_QCMD(aic7xxx_queue)
+
/*+F*************************************************************************
* Function:
* aic7xxx_bus_device_reset
static int arcmsr_bus_reset(struct scsi_cmnd *);
static int arcmsr_bios_param(struct scsi_device *sdev,
struct block_device *bdev, sector_t capacity, int *info);
-static int arcmsr_queue_command(struct scsi_cmnd *cmd,
- void (*done) (struct scsi_cmnd *));
+static int arcmsr_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int arcmsr_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
static void arcmsr_remove(struct pci_dev *pdev);
}
}
-static int arcmsr_queue_command(struct scsi_cmnd *cmd,
+static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,
void (* done)(struct scsi_cmnd *))
{
struct Scsi_Host *host = cmd->device->host;
return 0;
}
+static DEF_SCSI_QCMD(arcmsr_queue_command)
+
static bool arcmsr_get_hba_config(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
* done - function called on completion, with pointer to command descriptor
* Returns : 0, or < 0 on error.
*/
-int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
+static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
return 0;
}
+DEF_SCSI_QCMD(acornscsi_queuecmd)
+
/*
* Prototype: void acornscsi_reportstatus(struct scsi_cmnd **SCpntp1, struct scsi_cmnd **SCpntp2, int result)
* Purpose : pass a result to *SCpntp1, and check if *SCpntp1 = *SCpntp2
* Returns: 0 on success, else error.
* Notes: io_request_lock is held, interrupts are disabled.
*/
-int fas216_queue_command(struct scsi_cmnd *SCpnt,
+static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
return result;
}
+DEF_SCSI_QCMD(fas216_queue_command)
+
/**
* fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
* @SCpnt: Command to wake
* Returns: scsi result code.
* Notes: io_request_lock is held, interrupts are disabled.
*/
-int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
+static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
BUG_ON(info->scsi.irq != NO_IRQ);
info->internal_done = 0;
- fas216_queue_command(SCpnt, fas216_internal_done);
+ fas216_queue_command_lck(SCpnt, fas216_internal_done);
/*
* This wastes time, since we can't return until the command is
return 0;
}
+DEF_SCSI_QCMD(fas216_noqueue_command)
+
/*
* Error handler timeout function. Indicate that we timed out,
* and wake up any error handler process so it can continue.
*/
extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
-/* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
* Purpose : queue a command for adapter to process.
- * Params : SCpnt - Command to queue
- * done - done function to call once command is complete
+ * Params : h - host adapter
+ * : SCpnt - Command to queue
* Returns : 0 - success, else error
*/
-extern int fas216_queue_command(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
-/* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
* Purpose : queue a command for adapter to process, and process it to completion.
- * Params : SCpnt - Command to queue
- * done - done function to call once command is complete
+ * Params : h - host adapter
+ * : SCpnt - Command to queue
* Returns : 0 - success, else error
*/
-extern int fas216_noqueue_command(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
/* Function: irqreturn_t fas216_intr (FAS216_Info *info)
* Purpose : handle interrupts from the interface to progress a command
*
*/
-static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
{
SETUP_HOSTDATA(cmd->device->host);
Scsi_Cmnd *tmp;
return 0;
}
+static DEF_SCSI_QCMD(NCR5380_queue_command)
+
/*
* Function : NCR5380_main (void)
*
}
-/* This is the wrapper function for NCR5380_queue_command(). It just
- * tries to get the lock on the ST-DMA (see above) and then calls the
- * original function.
- */
-
-#if 0
-int atari_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
-{
- /* falcon_get_lock();
- * ++guenther: moved to NCR5380_queue_command() to prevent
- * race condition, see there for an explanation.
- */
- return NCR5380_queue_command(cmd, done);
-}
-#endif
-
-
int __init atari_scsi_detect(struct scsi_host_template *host)
{
static int called = 0;
*
* Queue a command to the ATP queue. Called with the host lock held.
*/
-static int atp870u_queuecommand(struct scsi_cmnd * req_p,
+static int atp870u_queuecommand_lck(struct scsi_cmnd *req_p,
void (*done) (struct scsi_cmnd *))
{
unsigned char c;
return 0;
}
+static DEF_SCSI_QCMD(atp870u_queuecommand)
+
/**
* send_s870 - send a command to the controller
* @host: host
bfa_trc(fabric->fcs, event);
wwn2str(pwwn_ptr, fabric->bport.port_cfg.pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Port is isolated due to VF_ID mismatch. "
"PWWN: %s Port VF_ID: %04x switch port VF_ID: %04x.",
pwwn_ptr, fabric->fcs->port_vfid,
wwn2str(pwwn_ptr, bfa_fcs_lport_get_pwwn(&fabric->bport));
wwn2str(fwwn_ptr,
bfa_fcs_lport_get_fabric_name(&fabric->bport));
- BFA_LOG(KERN_WARNING, bfad, log_level,
+ BFA_LOG(KERN_WARNING, bfad, bfa_log_level,
"Base port WWN = %s Fabric WWN = %s\n",
pwwn_ptr, fwwn_ptr);
}
bfa_fcb_itnim_online(itnim->itnim_drv);
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(itnim->rport->port));
wwn2str(rpwwn_buf, itnim->rport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Target (WWN = %s) is online for initiator (WWN = %s)\n",
rpwwn_buf, lpwwn_buf);
break;
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(itnim->rport->port));
wwn2str(rpwwn_buf, itnim->rport->pwwn);
if (bfa_fcs_lport_is_online(itnim->rport->port) == BFA_TRUE)
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"Target (WWN = %s) connectivity lost for "
"initiator (WWN = %s)\n", rpwwn_buf, lpwwn_buf);
else
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Target (WWN = %s) offlined by initiator (WWN = %s)\n",
rpwwn_buf, lpwwn_buf);
break;
__port_action[port->fabric->fab_type].online(port);
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Logical port online: WWN = %s Role = %s\n",
lpwwn_buf, "Initiator");
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
if (bfa_fcs_fabric_is_online(port->fabric) == BFA_TRUE)
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"Logical port lost fabric connectivity: WWN = %s Role = %s\n",
lpwwn_buf, "Initiator");
else
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Logical port taken offline: WWN = %s Role = %s\n",
lpwwn_buf, "Initiator");
char lpwwn_buf[BFA_STRING_32];
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Logical port deleted: WWN = %s Role = %s\n",
lpwwn_buf, "Initiator");
vport ? vport->vport_drv : NULL);
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(lport));
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"New logical port created: WWN = %s Role = %s\n",
lpwwn_buf, "Initiator");
wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
wwn2str(rpwwn_buf, rport->pwwn);
if (!BFA_FCS_PID_IS_WKA(rport->pid))
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Remote port (WWN = %s) online for logical port (WWN = %s)\n",
rpwwn_buf, lpwwn_buf);
}
wwn2str(rpwwn_buf, rport->pwwn);
if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
if (bfa_fcs_lport_is_online(rport->port) == BFA_TRUE)
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"Remote port (WWN = %s) connectivity lost for "
"logical port (WWN = %s)\n",
rpwwn_buf, lpwwn_buf);
else
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Remote port (WWN = %s) offlined by "
"logical port (WWN = %s)\n",
rpwwn_buf, lpwwn_buf);
ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
bfa_ioc_hb_monitor(ioc);
- BFA_LOG(KERN_INFO, bfad, log_level, "IOC enabled\n");
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC enabled\n");
}
static void
{
struct bfad_s *bfad = (struct bfad_s *)ioc->bfa->bfad;
bfa_iocpf_disable(ioc);
- BFA_LOG(KERN_INFO, bfad, log_level, "IOC disabled\n");
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC disabled\n");
}
/*
notify->cbfn(notify->cbarg);
}
- BFA_LOG(KERN_CRIT, bfad, log_level,
+ BFA_LOG(KERN_CRIT, bfad, bfa_log_level,
"Heart Beat of IOC has failed\n");
}
* Provide enable completion callback.
*/
ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
- BFA_LOG(KERN_WARNING, bfad, log_level,
+ BFA_LOG(KERN_WARNING, bfad, bfa_log_level,
"Running firmware version is incompatible "
"with the driver version\n");
}
bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port disabled: WWN = %s\n", pwwn_buf);
break;
bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port disabled: WWN = %s\n", pwwn_buf);
break;
bfa_fcport_scn(fcport, BFA_PORT_LINKUP, BFA_FALSE);
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port online: WWN = %s\n", pwwn_buf);
break;
bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port disabled: WWN = %s\n", pwwn_buf);
break;
bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port offline: WWN = %s\n", pwwn_buf);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port disabled: WWN = %s\n", pwwn_buf);
break;
BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkdown");
wwn2str(pwwn_buf, fcport->pwwn);
if (BFA_PORT_IS_DISABLED(fcport->bfa))
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port offline: WWN = %s\n", pwwn_buf);
else
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"Base port (WWN = %s) "
"lost fabric connectivity\n", pwwn_buf);
break;
bfa_fcport_reset_linkinfo(fcport);
wwn2str(pwwn_buf, fcport->pwwn);
if (BFA_PORT_IS_DISABLED(fcport->bfa))
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port offline: WWN = %s\n", pwwn_buf);
else
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"Base port (WWN = %s) "
"lost fabric connectivity\n", pwwn_buf);
break;
bfa_fcport_scn(fcport, BFA_PORT_LINKDOWN, BFA_FALSE);
wwn2str(pwwn_buf, fcport->pwwn);
if (BFA_PORT_IS_DISABLED(fcport->bfa))
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port offline: WWN = %s\n", pwwn_buf);
else
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"Base port (WWN = %s) "
"lost fabric connectivity\n", pwwn_buf);
break;
bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port enabled: WWN = %s\n", pwwn_buf);
break;
bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
wwn2str(pwwn_buf, fcport->pwwn);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"Base port enabled: WWN = %s\n", pwwn_buf);
break;
int rport_del_timeout = BFA_FCS_RPORT_DEF_DEL_TIMEOUT;
int bfa_lun_queue_depth = BFAD_LUN_QUEUE_DEPTH;
int bfa_io_max_sge = BFAD_IO_MAX_SGE;
-int log_level = 3; /* WARNING log level */
+int bfa_log_level = 3; /* WARNING log level */
int ioc_auto_recover = BFA_TRUE;
int bfa_linkup_delay = -1;
int fdmi_enable = BFA_TRUE;
MODULE_PARM_DESC(bfa_lun_queue_depth, "Lun queue depth, default=32, Range[>0]");
module_param(bfa_io_max_sge, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(bfa_io_max_sge, "Max io scatter/gather elements, default=255");
-module_param(log_level, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(log_level, "Driver log level, default=3, "
+module_param(bfa_log_level, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(bfa_log_level, "Driver log level, default=3, "
"Range[Critical:1|Error:2|Warning:3|Info:4]");
module_param(ioc_auto_recover, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ioc_auto_recover, "IOC auto recovery, default=1, "
} else
bfad_os_rport_online_wait(bfad);
- BFA_LOG(KERN_INFO, bfad, log_level, "bfa device claimed\n");
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level, "bfa device claimed\n");
return BFA_STATUS_OK;
}
extern int rport_del_timeout;
extern int bfa_lun_queue_depth;
extern int bfa_io_max_sge;
-extern int log_level;
+extern int bfa_log_level;
extern int ioc_auto_recover;
extern int bfa_linkup_delay;
extern int msix_disable_cb;
struct scsi_transport_template *bfad_im_scsi_transport_template;
struct scsi_transport_template *bfad_im_scsi_vport_transport_template;
static void bfad_im_itnim_work_handler(struct work_struct *work);
-static int bfad_im_queuecommand(struct scsi_cmnd *cmnd,
- void (*done)(struct scsi_cmnd *));
+static int bfad_im_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmnd);
static int bfad_im_slave_alloc(struct scsi_device *sdev);
static void bfad_im_fc_rport_add(struct bfad_im_port_s *im_port,
struct bfad_itnim_s *itnim);
}
bfa_trc(bfad, hal_io->iotag);
- BFA_LOG(KERN_INFO, bfad, log_level, "scsi%d: abort cmnd %p iotag %x\n",
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
+ "scsi%d: abort cmnd %p iotag %x\n",
im_port->shost->host_no, cmnd, hal_io->iotag);
(void) bfa_ioim_abort(hal_io);
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
cmnd->scsi_done(cmnd);
bfa_trc(bfad, hal_io->iotag);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"scsi%d: complete abort 0x%p iotag 0x%x\n",
im_port->shost->host_no, cmnd, hal_io->iotag);
return SUCCESS;
tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
if (!tskim) {
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"target reset, fail to allocate tskim\n");
rc = BFA_STATUS_FAILED;
goto out;
tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
if (!tskim) {
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"LUN reset, fail to allocate tskim");
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
rc = FAILED;
task_status = cmnd->SCp.Status >> 1;
if (task_status != BFI_TSKIM_STS_OK) {
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"LUN reset failure, status: %d\n", task_status);
rc = FAILED;
}
task_status = cmnd->SCp.Status >> 1;
if (task_status != BFI_TSKIM_STS_OK) {
- BFA_LOG(KERN_ERR, bfad, log_level,
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"target reset failure,"
" status: %d\n", task_status);
err_cnt++;
fcid = bfa_fcs_itnim_get_fcid(&itnim_drv->fcs_itnim);
wwn2str(wwpn_str, wwpn);
fcid2str(fcid_str, fcid);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"ITNIM FREE scsi%d: FCID: %s WWPN: %s\n",
port->im_port->shost->host_no,
fcid_str, wwpn_str);
bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
{
bfa_trc(bfad, bfad->inst_no);
- BFA_LOG(KERN_INFO, bfad, log_level, "Free scsi%d\n",
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level, "Free scsi%d\n",
im_port->shost->host_no);
fc_remove_host(im_port->shost);
fcid2str(fcid_str, fcid);
list_add_tail(&itnim->list_entry,
&im_port->itnim_mapped_list);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"ITNIM ONLINE Target: %d:0:%d "
"FCID: %s WWPN: %s\n",
im_port->shost->host_no,
wwn2str(wwpn_str, wwpn);
fcid2str(fcid_str, fcid);
list_del(&itnim->list_entry);
- BFA_LOG(KERN_INFO, bfad, log_level,
+ BFA_LOG(KERN_INFO, bfad, bfa_log_level,
"ITNIM OFFLINE Target: %d:0:%d "
"FCID: %s WWPN: %s\n",
im_port->shost->host_no,
* Scsi_Host template entry, queue a SCSI command to the BFAD.
*/
static int
-bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+bfad_im_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
{
struct bfad_im_port_s *im_port =
(struct bfad_im_port_s *) cmnd->device->host->hostdata[0];
return 0;
}
+static DEF_SCSI_QCMD(bfad_im_queuecommand)
+
void
bfad_os_rport_online_wait(struct bfad_s *bfad)
{
* and is expected to be held on return.
*
**/
-static int dc395x_queue_command(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
return 0;
}
+static DEF_SCSI_QCMD(dc395x_queue_command)
/*
* Return the disk geometry for the given SCSI device.
return 0;
}
-static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+static int adpt_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
{
adpt_hba* pHba = NULL;
struct adpt_device* pDev = NULL; /* dpt per device information */
return adpt_scsi_to_i2o(pHba, cmd, pDev);
}
+static DEF_SCSI_QCMD(adpt_queue)
+
static int adpt_bios_param(struct scsi_device *sdev, struct block_device *dev,
sector_t capacity, int geom[])
{
*/
static int adpt_detect(struct scsi_host_template * sht);
-static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *));
+static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd);
static int adpt_abort(struct scsi_cmnd * cmd);
static int adpt_reset(struct scsi_cmnd* cmd);
static int adpt_release(struct Scsi_Host *host);
static int dtc_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*);
static int dtc_detect(struct scsi_host_template *);
-static int dtc_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int dtc_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int dtc_bus_reset(Scsi_Cmnd *);
#ifndef CMD_PER_LUN
static int eata2x_detect(struct scsi_host_template *);
static int eata2x_release(struct Scsi_Host *);
-static int eata2x_queuecommand(struct scsi_cmnd *,
- void (*done) (struct scsi_cmnd *));
+static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int eata2x_eh_abort(struct scsi_cmnd *);
static int eata2x_eh_host_reset(struct scsi_cmnd *);
static int eata2x_bios_param(struct scsi_device *, struct block_device *,
}
-static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
+static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done) (struct scsi_cmnd *))
{
struct Scsi_Host *shost = SCpnt->device->host;
return 0;
}
+static DEF_SCSI_QCMD(eata2x_queuecommand)
+
static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
{
struct Scsi_Host *shost = SCarg->device->host;
return 0;
}
-static int eata_pio_queue(struct scsi_cmnd *cmd,
+static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
unsigned int x, y;
return 0;
}
+static DEF_SCSI_QCMD(eata_pio_queue)
+
static int eata_pio_abort(struct scsi_cmnd *cmd)
{
unsigned int loop = 100;
scsi_track_queue_full(dev, lp->num_tagged - 1);
}
-static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int esp_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct scsi_device *dev = cmd->device;
struct esp *esp = shost_priv(dev->host);
return 0;
}
+static DEF_SCSI_QCMD(esp_queuecommand)
+
static int esp_check_gross_error(struct esp *esp)
{
if (esp->sreg & ESP_STAT_SPAM) {
return 0;
}
-static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int fd_mcs_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
{
struct Scsi_Host *shpnt = SCpnt->device->host;
return 0;
}
+static DEF_SCSI_QCMD(fd_mcs_queue)
+
#if DEBUG_ABORT || DEBUG_RESET
static void fd_mcs_print_info(Scsi_Cmnd * SCpnt)
{
return IRQ_HANDLED;
}
-static int fdomain_16x0_queue(struct scsi_cmnd *SCpnt,
+static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
if (in_command) {
return 0;
}
+static DEF_SCSI_QCMD(fdomain_16x0_queue)
+
#if DEBUG_ABORT
static void print_info(struct scsi_cmnd *SCpnt)
{
void fnic_update_mac(struct fc_lport *, u8 *new);
void fnic_update_mac_locked(struct fnic *, u8 *new);
-int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+int fnic_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fnic_abort_cmd(struct scsi_cmnd *);
int fnic_device_reset(struct scsi_cmnd *);
int fnic_host_reset(struct scsi_cmnd *);
* Routine to send a scsi cdb
* Called with host_lock held and interrupts disabled.
*/
-int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
{
struct fc_lport *lp;
struct fc_rport *rport;
return ret;
}
+DEF_SCSI_QCMD(fnic_queuecommand)
+
/*
* fnic_fcpio_fw_reset_cmpl_handler
* Routine to handle fw reset completion
static int generic_NCR5380_abort(Scsi_Cmnd *);
static int generic_NCR5380_detect(struct scsi_host_template *);
static int generic_NCR5380_release_resources(struct Scsi_Host *);
-static int generic_NCR5380_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int generic_NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int generic_NCR5380_bus_reset(Scsi_Cmnd *);
static const char* generic_NCR5380_info(struct Scsi_Host *);
unsigned long arg);
static void gdth_flush(gdth_ha_str *ha);
-static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *));
+static int gdth_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
struct gdth_cmndinfo *cmndinfo);
static void gdth_scsi_done(struct scsi_cmnd *scp);
}
-static int gdth_queuecommand(struct scsi_cmnd *scp,
+static int gdth_queuecommand_lck(struct scsi_cmnd *scp,
void (*done)(struct scsi_cmnd *))
{
gdth_ha_str *ha = shost_priv(scp->device->host);
return __gdth_queuecommand(ha, scp, cmndinfo);
}
+static DEF_SCSI_QCMD(gdth_queuecommand)
+
static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
struct gdth_cmndinfo *cmndinfo)
{
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
#include <linux/compat.h>
#include <linux/blktrace_api.h>
#include <linux/uaccess.h>
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
-#define PCI_DEVICE_ID_HP_CISSF 0x333f
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x333F},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
- {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324a103C, "Smart Array P712m", &SA5_access},
{0x324b103C, "Smart Array P711m", &SA5_access},
- {0x3233103C, "StorageWorks P1210m", &SA5_access},
- {0x333F103C, "StorageWorks P1210m", &SA5_access},
{0x3250103C, "Smart Array", &SA5_access},
{0x3250113C, "Smart Array", &SA5_access},
{0x3250123C, "Smart Array", &SA5_access},
void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type);
-static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *));
+static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static void hpsa_scan_start(struct Scsi_Host *);
static int hpsa_scan_finished(struct Scsi_Host *sh,
unsigned long elapsed_time);
}
-static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
+static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ctlr_info *h;
return 0;
}
+static DEF_SCSI_QCMD(hpsa_scsi_queue_command)
+
static void hpsa_scan_start(struct Scsi_Host *sh)
{
struct ctlr_info *h = shost_to_hba(sh);
MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba);
}
-static int hptiop_queuecommand(struct scsi_cmnd *scp,
+static int hptiop_queuecommand_lck(struct scsi_cmnd *scp,
void (*done)(struct scsi_cmnd *))
{
struct Scsi_Host *host = scp->device->host;
return 0;
}
+static DEF_SCSI_QCMD(hptiop_queuecommand)
+
static const char *hptiop_info(struct Scsi_Host *host)
{
return driver_name_long;
#include <scsi/scsi_host.h>
/* Common forward declarations for all Linux-versions: */
-static int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int ibmmca_queuecommand (struct Scsi_Host *, struct scsi_cmnd *);
static int ibmmca_abort (Scsi_Cmnd *);
static int ibmmca_host_reset (Scsi_Cmnd *);
static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *);
}
/* The following routine is the SCSI command queue for the midlevel driver */
-static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int ibmmca_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
unsigned int ldn;
unsigned int scsi_cmd;
return 0;
}
+static DEF_SCSI_QCMD(ibmmca_queuecommand)
+
static int __ibmmca_abort(Scsi_Cmnd * cmd)
{
/* Abort does not work, as the adapter never generates an interrupt on
* Returns:
* 0 on success / other on failure
**/
-static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd,
+static int ibmvfc_queuecommand_lck(struct scsi_cmnd *cmnd,
void (*done) (struct scsi_cmnd *))
{
struct ibmvfc_host *vhost = shost_priv(cmnd->device->host);
return 0;
}
+static DEF_SCSI_QCMD(ibmvfc_queuecommand)
+
/**
* ibmvfc_sync_completion - Signal that a synchronous command has completed
* @evt: ibmvfc event struct
* @cmd: struct scsi_cmnd to be executed
* @done: Callback function to be called when cmd is completed
*/
-static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
+static int ibmvscsi_queuecommand_lck(struct scsi_cmnd *cmnd,
void (*done) (struct scsi_cmnd *))
{
struct srp_cmd *srp_cmd;
return ibmvscsi_send_srp_event(evt_struct, hostdata, 0);
}
+static DEF_SCSI_QCMD(ibmvscsi_queuecommand)
+
/* ------------------------------------------------------------
* Routines for driver initialization
*/
return 0;
}
-static int imm_queuecommand(struct scsi_cmnd *cmd,
+static int imm_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
imm_struct *dev = imm_dev(cmd->device->host);
return 0;
}
+static DEF_SCSI_QCMD(imm_queuecommand)
+
/*
* Apparently the disk->capacity attribute is off by 1 sector
* for all disk drives. We add the one here, but it should really
static void in2000_execute(struct Scsi_Host *instance);
-static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int in2000_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
return 0;
}
+static DEF_SCSI_QCMD(in2000_queuecommand)
+
/*
flags)
static int in2000_detect(struct scsi_host_template *) in2000__INIT;
-static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int in2000_abort(Scsi_Cmnd *);
static void in2000_setup(char *, int *) in2000__INIT;
static int in2000_biosparam(struct scsi_device *, struct block_device *,
* will cause the mid layer to call us again later with the command)
*/
-static int i91u_queuecommand(struct scsi_cmnd *cmd,
+static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
return 0;
}
+static DEF_SCSI_QCMD(i91u_queuecommand)
+
/**
* i91u_bus_reset - reset the SCSI bus
* @cmnd: Command block we want to trigger the reset for
* SCSI_MLQUEUE_DEVICE_BUSY if device is busy
* SCSI_MLQUEUE_HOST_BUSY if host is busy
**/
-static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
+static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd,
void (*done) (struct scsi_cmnd *))
{
struct ipr_ioa_cfg *ioa_cfg;
return 0;
}
+static DEF_SCSI_QCMD(ipr_queuecommand)
+
/**
* ipr_ioctl - IOCTL handler
* @sdev: scsi device struct
static int ips_release(struct Scsi_Host *);
static int ips_eh_abort(struct scsi_cmnd *);
static int ips_eh_reset(struct scsi_cmnd *);
-static int ips_queue(struct scsi_cmnd *, void (*)(struct scsi_cmnd *));
+static int ips_queue(struct Scsi_Host *, struct scsi_cmnd *);
static const char *ips_info(struct Scsi_Host *);
static irqreturn_t do_ipsintr(int, void *);
static int ips_hainit(ips_ha_t *);
/* Linux obtains io_request_lock before calling this function */
/* */
/****************************************************************************/
-static int ips_queue(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
+static int ips_queue_lck(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
{
ips_ha_t *ha;
ips_passthru_t *pt;
return (0);
}
+static DEF_SCSI_QCMD(ips_queue)
+
/****************************************************************************/
/* */
/* Routine Name: ips_biosparam */
* This is the i/o strategy routine, called by the SCSI layer. This routine
* is called with the host_lock held.
*/
-int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
+static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
{
struct fc_lport *lport;
struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
spin_lock_irq(lport->host->host_lock);
return rc;
}
+
+DEF_SCSI_QCMD(fc_queuecommand)
EXPORT_SYMBOL(fc_queuecommand);
/**
FAILURE_SESSION_NOT_READY,
};
-int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+static int iscsi_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
{
struct iscsi_cls_session *cls_session;
struct Scsi_Host *host;
spin_lock(host->host_lock);
return 0;
}
+
+DEF_SCSI_QCMD(iscsi_queuecommand)
EXPORT_SYMBOL_GPL(iscsi_queuecommand);
int iscsi_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
* Note: XXX: Remove the host unlock/lock pair when SCSI Core can
* call us without holding an IRQ spinlock...
*/
-int sas_queuecommand(struct scsi_cmnd *cmd,
+static int sas_queuecommand_lck(struct scsi_cmnd *cmd,
void (*scsi_done)(struct scsi_cmnd *))
__releases(host->host_lock)
__acquires(dev->sata_dev.ap->lock)
return res;
}
+DEF_SCSI_QCMD(sas_queuecommand)
+
static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
{
struct sas_task *task = TO_SAS_TASK(cmd);
* SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
**/
static int
-lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
return 0;
}
+static DEF_SCSI_QCMD(lpfc_queuecommand)
+
/**
* lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
-static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int mac53c94_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct fsc_state *state;
return 0;
}
+static DEF_SCSI_QCMD(mac53c94_queue)
+
static int mac53c94_host_reset(struct scsi_cmnd *cmd)
{
struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
* The command queuing entry point for the mid-layer.
*/
static int
-megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
+megaraid_queue_lck(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
{
adapter_t *adapter;
scb_t *scb;
return busy;
}
+static DEF_SCSI_QCMD(megaraid_queue)
+
/**
* mega_allocate_scb()
* @adapter - pointer to our soft state
scb->idx = CMDID_INT_CMDS;
- megaraid_queue(scmd, mega_internal_done);
+ megaraid_queue_lck(scmd, mega_internal_done);
wait_for_completion(&adapter->int_waitq);
static int issue_scb(adapter_t *, scb_t *);
static int mega_setup_mailbox(adapter_t *);
-static int megaraid_queue (Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
+static int megaraid_queue (struct Scsi_Host *, struct scsi_cmnd *);
static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
static void __mega_runpendq(adapter_t *);
static int issue_scb_block(adapter_t *, u_char *);
static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
static void megaraid_mbox_setup_device_map(adapter_t *);
-static int megaraid_queue_command(struct scsi_cmnd *,
- void (*)(struct scsi_cmnd *));
+static int megaraid_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
static void megaraid_mbox_runpendq(adapter_t *, scb_t *);
static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *,
* Queue entry point for mailbox based controllers.
*/
static int
-megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+megaraid_queue_command_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
{
adapter_t *adapter;
scb_t *scb;
return if_busy;
}
+static DEF_SCSI_QCMD(megaraid_queue_command)
+
/**
* megaraid_mbox_build_cmd - transform the mid-layer scsi commands
* @adapter : controller's soft state
* @done: Callback entry point
*/
static int
-megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
+megasas_queue_command_lck(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
{
u32 frame_count;
struct megasas_cmd *cmd;
return 0;
}
+static DEF_SCSI_QCMD(megasas_queue_command)
+
static struct megasas_instance *megasas_lookup_instance(u16 host_no)
{
int i;
* Called by midlayer with host locked to queue a new
* request
*/
-static int mesh_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int mesh_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct mesh_state *ms;
return 0;
}
+static DEF_SCSI_QCMD(mesh_queue)
+
/*
* Called to handle interrupts, either call by the interrupt
* handler (do_mesh_interrupt) or by other functions in
* SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
*/
static int
-_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT2SAS_DEVICE *sas_device_priv_data;
return SCSI_MLQUEUE_HOST_BUSY;
}
+static DEF_SCSI_QCMD(_scsih_qcmd)
+
/**
* _scsih_normalize_sense - normalize descriptor and fixed format sense data
* @sense_buffer: sense data returned by target
return 0;
}
-static int ncr53c8xx_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+static int ncr53c8xx_queue_command_lck (struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
unsigned long flags;
return sts;
}
+static DEF_SCSI_QCMD(ncr53c8xx_queue_command)
+
irqreturn_t ncr53c8xx_intr(int irq, void *dev_id)
{
unsigned long flags;
static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int);
static int nsp32_detect (struct pci_dev *pdev);
-static int nsp32_queuecommand(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static const char *nsp32_info (struct Scsi_Host *);
static int nsp32_release (struct Scsi_Host *);
return TRUE;
}
-static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
nsp32_target *target;
return 0;
}
+static DEF_SCSI_QCMD(nsp32_queuecommand)
+
/* initialize asic */
static int nsp32hw_init(nsp32_hw_data *data)
{
/* create a bio for continuation segment */
bio = bio_map_kern(req_q, or->cdb_cont.buff, or->cdb_cont.total_bytes,
GFP_KERNEL);
- if (unlikely(!bio))
- return -ENOMEM;
+ if (IS_ERR(bio))
+ return PTR_ERR(bio);
bio->bi_rw |= REQ_WRITE;
static int pas16_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*);
static int pas16_detect(struct scsi_host_template *);
-static int pas16_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int pas16_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int pas16_bus_reset(Scsi_Cmnd *);
#ifndef CMD_PER_LUN
SCpnt->scsi_done(SCpnt);
}
-static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+static int nsp_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
#ifdef NSP_DEBUG
return 0;
}
+static DEF_SCSI_QCMD(nsp_queuecommand)
+
/*
* setup PIO FIFO transfer mode and enable/disable to data out
*/
off_t offset,
int length,
int inout);
-static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
- void (* done)(struct scsi_cmnd *SCpnt));
+static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
/* Error handler */
/*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/
}
static int
-SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+SYM53C500_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
int i;
int port_base = SCpnt->device->host->io_port;
return 0;
}
+static DEF_SCSI_QCMD(SYM53C500_queue)
+
static int
SYM53C500_host_reset(struct scsi_cmnd *SCpnt)
{
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <scsi/libsas.h>
#include <scsi/scsi_tcq.h>
#include <scsi/sas_ata.h>
static unsigned int pmcraid_debug_log;
static unsigned int pmcraid_disable_aen;
static unsigned int pmcraid_log_level = IOASC_LOG_LEVEL_MUST;
+static unsigned int pmcraid_enable_msix;
/*
* Data structures to support multiple adapters by the LLD.
* SCSI_MLQUEUE_DEVICE_BUSY if device is busy
* SCSI_MLQUEUE_HOST_BUSY if host is busy
*/
-static int pmcraid_queuecommand(
+static int pmcraid_queuecommand_lck(
struct scsi_cmnd *scsi_cmd,
void (*done) (struct scsi_cmnd *)
)
return rc;
}
+static DEF_SCSI_QCMD(pmcraid_queuecommand)
+
/**
* pmcraid_open -char node "open" entry, allowed only users with admin access
*/
int rc;
struct pci_dev *pdev = pinstance->pdev;
- if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ if ((pmcraid_enable_msix) &&
+ (pci_find_capability(pdev, PCI_CAP_ID_MSIX))) {
int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
int i;
*/
#define PMCRAID_DRIVER_NAME "PMC MaxRAID"
#define PMCRAID_DEVFILE "pmcsas"
-#define PMCRAID_DRIVER_VERSION "2.0.3"
+#define PMCRAID_DRIVER_VERSION "1.0.3"
#define PMCRAID_DRIVER_DATE __DATE__
#define PMCRAID_FW_VERSION_1 0x002
__u8 lun[PMCRAID_LUN_LEN];
} __attribute__((packed, aligned(4)));
-/* extended configuration table sizes are of 64 bytes in size */
-#define PMCRAID_CFGTE_EXT_SIZE 32
+/* extended configuration table sizes are also of 32 bytes in size */
struct pmcraid_config_table_entry_ext {
struct pmcraid_config_table_entry cfgte;
- __u8 cfgte_ext[PMCRAID_CFGTE_EXT_SIZE];
};
/* resource types (config_table_entry.resource_type values) */
return 0;
}
-static int ppa_queuecommand(struct scsi_cmnd *cmd,
+static int ppa_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *))
{
ppa_struct *dev = ppa_dev(cmd->device->host);
return 0;
}
+static DEF_SCSI_QCMD(ppa_queuecommand)
+
/*
* Apparently the disk->capacity attribute is off by 1 sector
* for all disk drives. We add the one here, but it should really
return 0;
}
-static int ps3rom_queuecommand(struct scsi_cmnd *cmd,
+static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ps3rom_private *priv = shost_priv(cmd->device->host);
return 0;
}
+static DEF_SCSI_QCMD(ps3rom_queuecommand)
+
static int decode_lv1_status(u64 status, unsigned char *sense_key,
unsigned char *asc, unsigned char *ascq)
{
* context which is a big NO! NO!.
**************************************************************************/
static int
-qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+qla1280_queuecommand_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
{
struct Scsi_Host *host = cmd->device->host;
struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
return status;
}
+static DEF_SCSI_QCMD(qla1280_queuecommand)
+
enum action {
ABORT_COMMAND,
DEVICE_RESET,
uint32_t enable_target_reset :1;
uint32_t enable_lip_full_login :1;
uint32_t enable_led_scheme :1;
- uint32_t inta_enabled :1;
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
+ host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
skip_msi:
ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
- IRQF_SHARED, QLA2XXX_DRIVER_NAME, rsp);
+ ha->flags.msi_enabled ? 0 : IRQF_SHARED,
+ QLA2XXX_DRIVER_NAME, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
ha->pdev->irq);
goto fail;
}
- ha->flags.inta_enabled = 1;
+
clear_risc_ints:
/*
goto queuing_error_fcp_cmnd;
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
+ host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* build FCP_CMND IU */
memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
static void qla2xxx_scan_start(struct Scsi_Host *);
static void qla2xxx_slave_destroy(struct scsi_device *);
-static int qla2xxx_queuecommand(struct scsi_cmnd *cmd,
- void (*fn)(struct scsi_cmnd *));
+static int qla2xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int qla2xxx_eh_abort(struct scsi_cmnd *);
static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
}
static int
-qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+qla2xxx_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
return 0;
}
+static DEF_SCSI_QCMD(qla2xxx_queuecommand)
+
/*
* qla2x00_eh_wait_on_command
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
srb_t *sp;
- int ret;
+ int ret = SUCCESS;
unsigned int id, lun;
unsigned long flags;
int wait = 0;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_82XX;
+ ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla82xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.04-k0"
+#define QLA2XXX_VERSION "8.03.05-k0"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
-#define QLA_DRIVER_PATCH_VER 4
+#define QLA_DRIVER_PATCH_VER 5
#define QLA_DRIVER_BETA_VER 0
/*
* SCSI host template entry points
*/
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
- void (*done) (struct scsi_cmnd *));
+static int qla4xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
* completion handling). Unfortunely, it sometimes calls the scheduler
* in interrupt context which is a big NO! NO!.
**/
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
+static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
return 0;
}
+static DEF_SCSI_QCMD(qla4xxx_queuecommand)
+
/**
* qla4xxx_mem_free - frees memory allocated to adapter
* @ha: Pointer to host adapter structure.
* Queued command
*/
-int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
+static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *))
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
return 0;
}
+DEF_SCSI_QCMD(qlogicfas408_queuecommand)
+
/*
* Return bios parameters
*/
#define get_priv_by_host(x) (struct qlogicfas408_priv *)&((x)->hostdata[0])
irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id);
-int qlogicfas408_queuecommand(struct scsi_cmnd * cmd,
- void (*done) (struct scsi_cmnd *));
+int qlogicfas408_queuecommand(struct Scsi_Host *h, struct scsi_cmnd * cmd);
int qlogicfas408_biosparam(struct scsi_device * disk,
struct block_device *dev,
sector_t capacity, int ip[]);
*
* "This code must fly." -davem
*/
-static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
+static int qlogicpti_queuecommand_lck(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
{
struct Scsi_Host *host = Cmnd->device->host;
struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
return 1;
}
+static DEF_SCSI_QCMD(qlogicpti_queuecommand)
+
static int qlogicpti_return_status(struct Status_Entry *sts, int id)
{
int host_status = DID_ERROR;
* Description: a serial number identifies a request for error recovery
* and debugging purposes. Protected by the Host_Lock of host.
*/
-static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
+void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
cmd->serial_number = host->cmd_serial_number++;
if (cmd->serial_number == 0)
cmd->serial_number = host->cmd_serial_number++;
}
+EXPORT_SYMBOL(scsi_cmd_get_serial);
/**
* scsi_dispatch_command - Dispatch a command to the low-level driver.
int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
{
struct Scsi_Host *host = cmd->device->host;
- unsigned long flags = 0;
unsigned long timeout;
int rtn = 0;
goto out;
}
- spin_lock_irqsave(host->host_lock, flags);
- /*
- * AK: unlikely race here: for some reason the timer could
- * expire before the serial number is set up below.
- *
- * TODO: kill serial or move to blk layer
- */
- scsi_cmd_get_serial(host, cmd);
-
if (unlikely(host->shost_state == SHOST_DEL)) {
cmd->result = (DID_NO_CONNECT << 16);
scsi_done(cmd);
} else {
trace_scsi_dispatch_cmd_start(cmd);
- rtn = host->hostt->queuecommand(cmd, scsi_done);
+ cmd->scsi_done = scsi_done;
+ rtn = host->hostt->queuecommand(host, cmd);
}
- spin_unlock_irqrestore(host->host_lock, flags);
+
if (rtn) {
trace_scsi_dispatch_cmd_error(cmd, rtn);
if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
}
static
-int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
+int scsi_debug_queuecommand_lck(struct scsi_cmnd *SCpnt, done_funct_t done)
{
unsigned char *cmd = (unsigned char *) SCpnt->cmnd;
int len, k;
(delay_override ? 0 : scsi_debug_delay));
}
+static DEF_SCSI_QCMD(scsi_debug_queuecommand)
+
static struct scsi_host_template sdebug_driver_template = {
.proc_info = scsi_debug_proc_info,
.proc_name = sdebug_proc_name,
return rtn;
}
-static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
{
if (!scmd->device->host->hostt->eh_abort_handler)
return FAILED;
return scmd->device->host->hostt->eh_abort_handler(scmd);
}
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd: SCSI cmd to abort from Lower Level.
- *
- * Notes:
- * This function will not return until the user's completion function
- * has been called. there is no timeout on this operation. if the
- * author of the low-level driver wishes this operation to be timed,
- * they can provide this facility themselves. helper functions in
- * scsi_error.c can be supplied to make this easier to do.
- */
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
- /*
- * scsi_done was called just after the command timed out and before
- * we had a chance to process it. (db)
- */
- if (scmd->serial_number == 0)
- return SUCCESS;
- return __scsi_try_to_abort_cmd(scmd);
-}
-
static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
{
- if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+ if (scsi_try_to_abort_cmd(scmd) != SUCCESS)
if (scsi_try_bus_device_reset(scmd) != SUCCESS)
if (scsi_try_target_reset(scmd) != SUCCESS)
if (scsi_try_bus_reset(scmd) != SUCCESS)
struct Scsi_Host *shost = sdev->host;
DECLARE_COMPLETION_ONSTACK(done);
unsigned long timeleft;
- unsigned long flags;
struct scsi_eh_save ses;
int rtn;
scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
shost->eh_action = &done;
- spin_lock_irqsave(shost->host_lock, flags);
scsi_log_send(scmd);
- shost->hostt->queuecommand(scmd, scsi_eh_done);
- spin_unlock_irqrestore(shost->host_lock, flags);
+ scmd->scsi_done = scsi_eh_done;
+ shost->hostt->queuecommand(shost, scmd);
timeleft = wait_for_completion_timeout(&done, timeout);
INIT_LIST_HEAD(&cmd->eh_entry);
- /*
- * Set the serial numbers back to zero
- */
- cmd->serial_number = 0;
-
atomic_inc(&cmd->device->iodone_cnt);
if (cmd->result)
atomic_inc(&cmd->device->ioerr_cnt);
blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
- /* New queue, no concurrency on queue_flags */
if (!shost->use_clustering)
- queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
+ q->limits.cluster = 0;
/*
* set a reasonable default alignment on word boundaries: the
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/delay.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/string_helpers.h>
#include <linux/async.h>
}
static int
-stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+stex_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct st_hba *hba;
struct Scsi_Host *host;
return 0;
}
+static DEF_SCSI_QCMD(stex_queuecommand)
+
static void stex_scsi_done(struct st_ccb *ccb)
{
struct scsi_cmnd *cmd = ccb->cmd;
*/
/* Only make static if a wrapper function is used */
-static int NCR5380_queue_command(struct scsi_cmnd *cmd,
+static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
SETUP_HOSTDATA(cmd->device->host);
return 0;
}
+static DEF_SCSI_QCMD(NCR5380_queue_command)
+
/*
* Function : NCR5380_main (void)
*
static int sun3scsi_detect (struct scsi_host_template *);
static const char *sun3scsi_info (struct Scsi_Host *);
static int sun3scsi_bus_reset(struct scsi_cmnd *);
-static int sun3scsi_queue_command(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int sun3scsi_release (struct Scsi_Host *);
#ifndef CMD_PER_LUN
return info;
}
-int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int sym53c416_queuecommand_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
{
int base;
unsigned long flags = 0;
return 0;
}
+DEF_SCSI_QCMD(sym53c416_queuecommand)
+
static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
{
int base;
static int sym53c416_detect(struct scsi_host_template *);
static const char *sym53c416_info(struct Scsi_Host *);
static int sym53c416_release(struct Scsi_Host *);
-static int sym53c416_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int sym53c416_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int sym53c416_host_reset(Scsi_Cmnd *);
static int sym53c416_bios_param(struct scsi_device *, struct block_device *,
sector_t, int *);
* queuecommand method. Entered with the host adapter lock held and
* interrupts disabled.
*/
-static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
+static int sym53c8xx_queue_command_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
return 0;
}
+static DEF_SCSI_QCMD(sym53c8xx_queue_command)
+
/*
* Linux entry point of the interrupt handler.
*/
static int t128_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*);
static int t128_detect(struct scsi_host_template *);
-static int t128_queue_command(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+static int t128_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int t128_bus_reset(struct scsi_cmnd *);
#ifndef CMD_PER_LUN
return;
}
-static int DC390_queuecommand(struct scsi_cmnd *cmd,
+static int DC390_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct scsi_device *sdev = cmd->device;
return SCSI_MLQUEUE_DEVICE_BUSY;
}
+static DEF_SCSI_QCMD(DC390_queuecommand)
+
static void dc390_dumpinfo (struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
{
struct pci_dev *pdev;
static int u14_34f_detect(struct scsi_host_template *);
static int u14_34f_release(struct Scsi_Host *);
-static int u14_34f_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+static int u14_34f_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int u14_34f_eh_abort(struct scsi_cmnd *);
static int u14_34f_eh_host_reset(struct scsi_cmnd *);
static int u14_34f_bios_param(struct scsi_device *, struct block_device *,
}
-static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
+static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
unsigned int i, j, k;
struct mscp *cpp;
return 0;
}
+static DEF_SCSI_QCMD(u14_34f_queuecommand)
+
static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
unsigned int i, j;
mscp->transfer_data_length = transfer_length;
}
-static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt,
+static int ultrastor_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done) (struct scsi_cmnd *))
{
struct mscp *my_mscp;
return 0;
}
+static DEF_SCSI_QCMD(ultrastor_queuecommand)
+
/* This code must deal with 2 cases:
1. The command has not been written to the OGM. In this case, set
static int ultrastor_detect(struct scsi_host_template *);
static const char *ultrastor_info(struct Scsi_Host *shpnt);
-static int ultrastor_queuecommand(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+static int ultrastor_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int ultrastor_abort(struct scsi_cmnd *);
static int ultrastor_host_reset(struct scsi_cmnd *);
static int ultrastor_biosparam(struct scsi_device *, struct block_device *,
return 0;
}
-static int pvscsi_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int pvscsi_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct Scsi_Host *host = cmd->device->host;
struct pvscsi_adapter *adapter = shost_priv(host);
return 0;
}
+static DEF_SCSI_QCMD(pvscsi_queue)
+
static int pvscsi_abort(struct scsi_cmnd *cmd)
{
struct pvscsi_adapter *adapter = shost_priv(cmd->device->host);
msg[1] = offset;
}
-int
-wd33c93_queuecommand(struct scsi_cmnd *cmd,
+static int
+wd33c93_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct WD33C93_hostdata *hostdata;
return 0;
}
+DEF_SCSI_QCMD(wd33c93_queuecommand)
+
/*
* This routine attempts to start a scsi command. If the host_card is
* already connected, we give up immediately. Otherwise, look through
void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs,
dma_setup_t setup, dma_stop_t stop, int clock_freq);
int wd33c93_abort (struct scsi_cmnd *cmd);
-int wd33c93_queuecommand (struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *));
+int wd33c93_queuecommand (struct Scsi_Host *h, struct scsi_cmnd *cmd);
void wd33c93_intr (struct Scsi_Host *instance);
int wd33c93_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
int wd33c93_host_reset (struct scsi_cmnd *);
return IRQ_HANDLED;
}
-static int wd7000_queuecommand(struct scsi_cmnd *SCpnt,
+static int wd7000_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
Scb *scb;
return 0;
}
+static DEF_SCSI_QCMD(wd7000_queuecommand)
+
static int wd7000_diagnostics(Adapter * host, int code)
{
static IcbDiag icb = { ICB_OP_DIAGNOSTICS };
.device = uart_console_device,
.setup = serial8250_console_setup,
.early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &serial8250_reg,
};
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
static void kgdboc_restore_input(void)
{
- schedule_work(&kgdboc_restore_input_work);
+ if (likely(system_state == SYSTEM_RUNNING))
+ schedule_work(&kgdboc_restore_input_work);
}
static int kgdboc_register_kbd(char **cptr)
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
- u32 mul = 0x3600;
- u32 ps = 0x10;
+ u32 ps, mul;
switch (termios->c_cflag & CSIZE) {
case CS5:
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
quot = 1;
+ ps = 0x10;
+ mul = 0x3600;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
break;
- case 3000000:
- mul = 0x2EE0;
- break;
- case 2500000:
- mul = 0x2710;
- break;
- case 2000000:
- mul = 0x1F40;
- break;
case 1843200:
mul = 0x2400;
break;
+ case 3000000:
+ case 2500000:
+ case 2000000:
case 1500000:
- mul = 0x1770;
- break;
case 1000000:
- mul = 0xFA0;
- break;
case 500000:
- mul = 0x7D0;
+ /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+ mul = baud / 500000 * 0x9C4;
break;
default:
/* Use uart_get_divisor to get quot for other baud rates */
#include <linux/console.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/serial.h> /* for serial_state and serial_icounter_struct */
#include <linux/serial_core.h>
list_add(&clk->sibling, &root_clks);
list_add(&clk->node, &clock_list);
+
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
if (clk->ops && clk->ops->init)
clk->ops->init(clk);
+#endif
out_unlock:
mutex_unlock(&clock_list_sem);
EXPORT_SYMBOL_GPL(clk_get_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- return clk_set_rate_ex(clk, rate, 0);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
{
int ret = -EOPNOTSUPP;
unsigned long flags;
spin_lock_irqsave(&clock_lock, flags);
if (likely(clk->ops && clk->ops->set_rate)) {
- ret = clk->ops->set_rate(clk, rate, algo_id);
+ ret = clk->ops->set_rate(clk, rate);
if (ret != 0)
goto out_unlock;
} else {
return ret;
}
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+EXPORT_SYMBOL_GPL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
*best_freq = freq_max;
}
- pr_debug("too low freq %lu, error %lu\n", freq->frequency,
+ pr_debug("too low freq %u, error %lu\n", freq->frequency,
target - freq_max);
if (!error)
*best_freq = freq_min;
}
- pr_debug("too high freq %lu, error %lu\n", freq->frequency,
+ pr_debug("too high freq %u, error %lu\n", freq->frequency,
freq_min - target);
if (!error)
clkp->ops->set_parent(clkp,
clkp->parent);
if (likely(clkp->ops->set_rate))
- clkp->ops->set_rate(clkp,
- rate, NO_CHANGE);
+ clkp->ops->set_rate(clkp, rate);
else if (likely(clkp->ops->recalc))
clkp->rate = clkp->ops->recalc(clkp);
}
return 0;
}
-static int sh_clk_div6_set_rate(struct clk *clk,
- unsigned long rate, int algo_id)
+static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long value;
int idx;
unsigned long value;
int ret;
- ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
+ ret = sh_clk_div6_set_rate(clk, clk->rate);
if (ret == 0) {
value = __raw_readl(clk->enable_reg);
value &= ~0x100; /* clear stop bit to enable clock */
return 0;
}
-static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
{
struct clk_div4_table *d4t = clk->priv;
unsigned long value;
list_add_tail(&d->list, &intc_list);
raw_spin_lock_init(&d->lock);
+ INIT_RADIX_TREE(&d->tree, GFP_ATOMIC);
d->index = nr_intc_controllers;
entry = radix_tree_deref_slot((void **)entries[i]);
if (unlikely(!entry))
continue;
- if (unlikely(entry == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(entry))
goto restart;
irq = create_irq();
xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
if (xfer->tx_buf) {
+ /* tx_buf is a const void* where we need a void * for the dma
+ * mapping */
+ void *nonconst_tx = (void *)xfer->tx_buf;
+
xfer->tx_dma = dma_map_single(dev,
- (void *) xfer->tx_buf, xfer->len,
+ nonconst_tx, xfer->len,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, xfer->tx_dma))
return -ENOMEM;
msg = container_of(mcfqspi->msgq.next, struct spi_message,
queue);
- list_del_init(&mcfqspi->msgq);
+ list_del_init(&msg->queue);
spin_unlock_irqrestore(&mcfqspi->lock, flags);
spi = msg->spi;
{
while (dws->write(dws))
dws->read(dws);
+ /*
+ * There is a possibility that the last word of a transaction
+ * will be lost if data is not ready. Re-read to solve this issue.
+ */
+ dws->read(dws);
transfer_complete(dws);
}
.of_match_table = mpc52xx_spi_match,
},
.probe = mpc52xx_spi_probe,
- .remove = __exit_p(mpc52xx_spi_remove),
+ .remove = __devexit_p(mpc52xx_spi_remove),
};
static int __init mpc52xx_spi_init(void)
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:omap2_mcspi");
+#ifdef CONFIG_SUSPEND
+/*
+ * When SPI wake up from off-mode, CS is in activate state. If it was in
+ * unactive state when driver was suspend, then force it to unactive state at
+ * wake up.
+ */
+static int omap2_mcspi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+ struct omap2_mcspi_cs *cs;
+
+ omap2_mcspi_enable_clocks(mcspi);
+ list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs,
+ node) {
+ if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
+
+ /*
+ * We need to toggle CS state for OMAP take this
+ * change in account.
+ */
+ MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1);
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+ MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0);
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+ }
+ }
+ omap2_mcspi_disable_clocks(mcspi);
+ return 0;
+}
+#else
+#define omap2_mcspi_resume NULL
+#endif
+
+static const struct dev_pm_ops omap2_mcspi_pm_ops = {
+ .resume = omap2_mcspi_resume,
+};
+
static struct platform_driver omap2_mcspi_driver = {
.driver = {
.name = "omap2_mcspi",
.owner = THIS_MODULE,
+ .pm = &omap2_mcspi_pm_ops
},
.remove = __exit_p(omap2_mcspi_remove),
};
list_del(&master->list);
mutex_unlock(&board_lock);
- dummy = device_for_each_child(master->dev.parent, &master->dev,
- __unregister);
+ dummy = device_for_each_child(&master->dev, NULL, __unregister);
device_unregister(&master->dev);
}
EXPORT_SYMBOL_GPL(spi_unregister_master);
return mpc8xxx_spi->count;
}
-static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
+static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
{
- if (cmd[1] && cmd[2] && cmd[3]) {
+ if (cmd) {
cmd[1] = (u8)(addr >> 16);
cmd[2] = (u8)(addr >> 8);
cmd[3] = (u8)(addr >> 0);
}
}
-static unsigned int fsl_espi_cmd2addr(u8 *cmd)
+static inline unsigned int fsl_espi_cmd2addr(u8 *cmd)
{
- if (cmd[1] && cmd[2] && cmd[3])
+ if (cmd)
return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
return 0;
}
}
- addr = fsl_espi_cmd2addr(local_buf);
- addr += pos;
- fsl_espi_addr2cmd(addr, local_buf);
+ if (pos > 0) {
+ addr = fsl_espi_cmd2addr(local_buf);
+ addr += pos;
+ fsl_espi_addr2cmd(addr, local_buf);
+ }
espi_trans->n_tx = n_tx;
espi_trans->n_rx = trans_len;
/* We need handle RX first */
if (events & SPIE_NE) {
- u32 rx_data;
+ u32 rx_data, tmp;
+ u8 rx_data_8;
/* Spin until RX is done */
while (SPIE_RXCNT(events) < min(4, mspi->len)) {
cpu_relax();
events = mpc8xxx_spi_read_reg(®_base->event);
}
- mspi->len -= 4;
- rx_data = mpc8xxx_spi_read_reg(®_base->receive);
+ if (mspi->len >= 4) {
+ rx_data = mpc8xxx_spi_read_reg(®_base->receive);
+ } else {
+ tmp = mspi->len;
+ rx_data = 0;
+ while (tmp--) {
+ rx_data_8 = in_8((u8 *)®_base->receive);
+ rx_data |= (rx_data_8 << (tmp * 8));
+ }
+
+ rx_data <<= (4 - mspi->len) * 8;
+ }
+
+ mspi->len -= 4;
if (mspi->rx)
mspi->get_rx(rx_data, mspi);
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
#define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file
-static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO,
get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture);
-static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO,
class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture);
static int asus_oled_probe(struct usb_interface *interface,
const struct usb_device_id *id)
return;
batman_if->if_status = IF_TO_BE_REMOVED;
-
- /* caller must take if_list_lock */
- list_del_rcu(&batman_if->list);
synchronize_rcu();
sysfs_del_hardif(&batman_if->hardif_obj);
hardif_put(batman_if);
void hardif_remove_interfaces(void)
{
struct batman_if *batman_if, *batman_if_tmp;
+ struct list_head if_queue;
+
+ INIT_LIST_HEAD(&if_queue);
- rtnl_lock();
spin_lock(&if_list_lock);
list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) {
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
+ list_add_tail(&batman_if->list, &if_queue);
}
spin_unlock(&if_list_lock);
+
+ rtnl_lock();
+ list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) {
+ hardif_remove_interface(batman_if);
+ }
rtnl_unlock();
}
break;
case NETDEV_UNREGISTER:
spin_lock(&if_list_lock);
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
spin_unlock(&if_list_lock);
+
+ hardif_remove_interface(batman_if);
break;
case NETDEV_CHANGEMTU:
if (batman_if->soft_iface)
struct bat_priv *priv = netdev_priv(soft_iface);
/* check if enough space is available for pulling, and pull */
- if (!pskb_may_pull(skb, hdr_size)) {
- kfree_skb(skb);
- return;
- }
+ if (!pskb_may_pull(skb, hdr_size))
+ goto dropped;
+
skb_pull_rcsum(skb, hdr_size);
/* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/
/* skb->dev & skb->pkt_type are set here */
+ if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+ goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be neccesary anymore as we use skb_pull_rcsum()
soft_iface->last_rx = jiffies;
netif_rx(skb);
+ return;
+
+dropped:
+ kfree_skb(skb);
+ return;
}
#ifdef HAVE_NET_DEVICE_OPS
Contact Info:
=============
-Brett Rudley brudley@broadcom.com
-Henry Ptasinski henryp@broadcom.com
-Dowan Kim dowan@broadcom.com
+Brett Rudley brudley@broadcom.com
+Henry Ptasinski henryp@broadcom.com
+Dowan Kim dowan@broadcom.com
+Roland Vossen rvossen@broadcom.com
+Arend van Spriel arend@broadcom.com
Brett Rudley <brudley@broadcom.com>
Henry Ptasinski <henryp@broadcom.com>
Dowan Kim <dowan@broadcom.com>
+Roland Vossen <rvossen@broadcom.com>
+Arend van Spriel <arend@broadcom.com>
usbduxsub_tmp->inBuffer = NULL;
kfree(usbduxsub_tmp->insnBuffer);
usbduxsub_tmp->insnBuffer = NULL;
- kfree(usbduxsub_tmp->inBuffer);
- usbduxsub_tmp->inBuffer = NULL;
+ kfree(usbduxsub_tmp->outBuffer);
+ usbduxsub_tmp->outBuffer = NULL;
kfree(usbduxsub_tmp->dac_commands);
usbduxsub_tmp->dac_commands = NULL;
kfree(usbduxsub_tmp->dux_commands);
return ARRAY_SIZE(formats);
}
-struct cx25821_fmt *format_by_fourcc(unsigned int fourcc)
+struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc)
{
unsigned int i;
pix_format =
(dev->channels[ch_id].pixel_formats ==
PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
- fh->fmt = format_by_fourcc(pix_format);
+ fh->fmt = cx25821_format_by_fourcc(pix_format);
v4l2_prio_open(&dev->channels[ch_id].prio, &fh->prio);
if (0 != err)
return err;
- fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ fh->fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat);
fh->vidq.field = f->fmt.pix.field;
/* check if width and height is valid based on set standard */
enum v4l2_field field;
unsigned int maxw, maxh;
- fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat);
if (NULL == fmt)
return -EINVAL;
#define FORMAT_FLAGS_PACKED 0x01
extern struct cx25821_fmt formats[];
-extern struct cx25821_fmt *format_by_fourcc(unsigned int fourcc);
+extern struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc);
extern struct cx25821_data timeout_data[MAX_VID_CHANNEL_NUM];
extern void cx25821_dump_video_queue(struct cx25821_dev *dev,
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/kref.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/uaccess.h>
t->value = temp; \
return count; \
} \
- static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+ static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value);
show_int(enable);
show_int(offline);
struct go7007 *go = i2c_get_adapdata(adapter);
struct v4l2_device *v4l2_dev = &go->v4l2_dev;
- if (v4l2_i2c_new_subdev(v4l2_dev, adapter, NULL, type, addr, NULL))
+ if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL))
return 0;
printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type);
/* Static decl */
static int storvsc_probe(struct device *dev);
-static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
- void (*done)(struct scsi_cmnd *));
+static int storvsc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd);
static int storvsc_device_alloc(struct scsi_device *);
static int storvsc_device_configure(struct scsi_device *);
static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd);
/*
* storvsc_queuecommand - Initiate command processing
*/
-static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
+static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
void (*done)(struct scsi_cmnd *))
{
int ret;
return ret;
}
+static DEF_SCSI_QCMD(storvsc_queuecommand)
+
static int storvsc_merge_bvec(struct request_queue *q,
struct bvec_merge_data *bmd, struct bio_vec *bvec)
{
adis16220_write_reset, 0);
#define IIO_DEV_ATTR_CAPTURE(_store) \
- IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0)
+ IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)
static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);
#include <linux/uaccess.h>
#include <linux/firmware.h>
#include <linux/ioctl.h>
-#include <linux/smp_lock.h>
#ifdef CONFIG_MRST_RAR_HANDLER
#include <linux/rar_register.h>
#include "../../../drivers/staging/memrar/memrar.h"
dbufs->output_bytes_produced = total_output;
str_info->status = str_info->prev;
str_info->prev = STREAM_DECODE;
- str_info->decode_ibuf = NULL;
kfree(str_info->decode_ibuf);
+ str_info->decode_ibuf = NULL;
return retval;
}
/* This is always called with scsi_lock(host) held */
//----- queuecommand() ---------------------
-static int queuecommand(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
+static int queuecommand_lck(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
{
struct us_data *us = host_to_us(srb->device->host);
return 0;
}
+static DEF_SCSI_QCMD(queuecommand)
+
/***********************************************************************
* Error handling functions
***********************************************************************/
VARIAX_PARAM_R(float, mix1);
VARIAX_PARAM_R(int, pickup_wiring);
-static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position,
+static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
+static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position,
pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO,
pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO,
pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO,
pod_get_compression_threshold,
pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup,
+static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
+static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup,
pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model,
+static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model,
pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid,
+static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
+static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
+static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
+static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
+static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
+static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid,
pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol,
+static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol,
pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix,
+static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix,
pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup,
+static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup,
pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO,
pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence,
+static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence,
pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO,
pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO,
pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold,
+static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold,
pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time,
+static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time,
pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable,
+static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable,
pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable,
+static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable,
pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time,
+static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time,
pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable,
+static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable,
pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1,
+static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1,
pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1,
+static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1,
pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_note_value,
pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency__bass,
pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2,
+static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2,
pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO,
pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3,
+static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3,
pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable,
+static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable,
pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type,
+static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type,
pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay,
+static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay,
pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone,
+static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone,
pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO,
pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post,
+static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post,
pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency__bass,
pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable,
+static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable,
pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO,
pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO,
pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO,
pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post,
+static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post,
pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post,
+static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post,
pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model,
+static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model,
pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay,
+static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay,
pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable,
+static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable,
pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_note_value,
pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2,
+static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2,
pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3,
+static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3,
pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4,
+static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4,
pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5,
+static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5,
pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix,
+static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix,
pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post,
+static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post,
pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO,
pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency__bass,
pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_double_precision,
pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_double_precision,
pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable,
+static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable,
pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
+static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO,
pod_get_volume_tweak_pedal_assign,
pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO,
pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection,
+static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
+static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection,
pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model,
+static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model,
pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model,
+static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model,
pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel,
+static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel,
pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO,
pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_stomp_param_1_note_value,
pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2,
+static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2,
pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3,
+static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3,
pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4,
+static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4,
pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5,
+static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5,
pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6,
+static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6,
pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO,
pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4,
+static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4,
pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5,
+static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5,
pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post,
+static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post,
pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model,
+static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model,
pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO,
pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb,
+static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb,
pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb,
+static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb,
pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model,
+static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model,
pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume,
+static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume,
pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off,
+static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off,
pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO,
pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage,
+static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage,
pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain,
+static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain,
pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO,
pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain,
+static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain,
pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO,
pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain,
+static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain,
pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO,
pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO,
pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain,
+static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain,
pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO,
pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable,
return count;
}
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO,
midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO,
midi_get_midi_mask_receive, midi_set_midi_mask_receive);
/* MIDI device destructor */
return count;
}
-static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume,
+static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume,
pcm_set_impulse_volume);
-static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period,
+static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period,
pcm_set_impulse_period);
#endif
#undef GET_SYSTEM_PARAM
/* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel,
+static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel,
pod_set_channel);
static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf,
+static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
+static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf,
pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
+static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO,
pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level,
+static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level,
pod_set_monitor_level);
static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read,
pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing,
+static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing,
pod_set_routing);
static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read,
pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read,
pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read,
pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq,
+static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq,
pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute,
+static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute,
pod_set_tuner_mute);
static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
#endif
/* control info callback */
return count;
}
-static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_red);
-static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_green);
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
#endif
/* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model,
+static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model,
variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume,
+static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume,
variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
+static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active,
+static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active,
variax_set_active);
static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
#endif
/*
#include <linux/console.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
-#include <linux/i2c-id.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
edev:
platform_device_unregister(dcon_device);
dcon_device = NULL;
- i2c_set_clientdata(client, NULL);
eirq:
free_irq(DCON_IRQ, &dcon_driver);
einit:
platform_device_unregister(dcon_device);
cancel_work_sync(&dcon_work);
- i2c_set_clientdata(client, NULL);
-
return 0;
}
static void quickstart_exit(void)
{
input_unregister_device(quickstart_input);
- input_free_device(quickstart_input);
device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
device_remove_file(&pf_device->dev, &dev_attr_buttons);
{
struct quickstart_btn **ptr = &quickstart_data.btn_lst;
int count;
+ int ret;
quickstart_input = input_allocate_device();
ptr = &((*ptr)->next);
}
- return input_register_device(quickstart_input);
+ ret = input_register_device(quickstart_input);
+ if (ret) {
+ input_free_device(quickstart_input);
+ return ret;
+ }
+
+ return 0;
}
static int __init quickstart_init(void)
{USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */
{USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */
{USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */
+ {USB_DEVICE(0x0411, 0x015D)}, /* Buffalo Airstation WLI-UC-GN */
{} /* Terminating entry */
};
udelay(10);
}
- if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
- panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
+ if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
+ " %#X RE|WE bits are not clear!!\n", u1bTmp);
+ dump_stack();
+ return 0;
+ }
/* RTL8187S HSSI Read/Write Function */
u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
int idx;
int ByteCnt = nDataBufBitCnt / 8;
/* printk("%d\n",nDataBufBitCnt); */
- if ((nDataBufBitCnt % 8) != 0)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
- nDataBufBitCnt);
+ if ((nDataBufBitCnt % 8) != 0) {
+ printk(KERN_ERR "rtl8187se: "
+ "HwThreeWire(): nDataBufBitCnt(%d)"
+ " should be multiple of 8!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt += 8;
+ nDataBufBitCnt &= ~7;
+ }
- if (nDataBufBitCnt > 64)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
+ if (nDataBufBitCnt > 64) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire():"
+ " nDataBufBitCnt(%d) should <= 64!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt = 64;
+ }
for (idx = 0; idx < ByteCnt; idx++)
write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kref.h>
-#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
{
u8 val8 = 0;
u8 ret = _SUCCESS;
- u8 PollingCnt = 20;
+ int PollingCnt = 20;
struct registry_priv *pregistrypriv = &padapter->registrypriv;
if (pregistrypriv->chip_version == RTL8712_FPGA) {
}
return count;
}
-static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO,
get_silent_state, set_silent_state);
#include <linux/console.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/wait.h>
{
if (virt_keyboard != NULL) {
input_unregister_device(virt_keyboard);
- input_free_device(virt_keyboard);
virt_keyboard = NULL;
}
}
/* Here we force report 512 byte hardware sector size to Kernel */
blk_queue_logical_block_size(dev->queue, 512);
- blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(dev->queue, REQ_FLUSH);
dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd");
if (IS_ERR(dev->thread)) {
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (DEPRECATED)"
- depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS && BKL
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
/* Load tuner module */
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.type = dev->tuner_type;
if (dev->caps.has_tda9874)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvaudio", I2C_ADDR_TDA9874, NULL);
+ "tvaudio", I2C_ADDR_TDA9874, NULL);
/* register and initialize V4L2 */
rc = tm6000_v4l2_register(dev);
__ATTR_RO(metrics_bytes_identical),
__ATTR_RO(metrics_bytes_sent),
__ATTR_RO(metrics_cpu_kcycles_used),
- __ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store),
+ __ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store),
};
/*
#ifndef SYS_DEF_H
#define SYS_DEF_H
+
+#include <linux/delay.h>
+
#define WB_LINUX
#define WB_LINUX_WPA_PSK
int ret = 0;
struct zram *zram = queue->queuedata;
- if (unlikely(!zram->init_done)) {
- set_bit(BIO_UPTODATE, &bio->bi_flags);
- bio_endio(bio, 0);
- return 0;
- }
-
if (!valid_io_request(zram, bio)) {
zram_stat64_inc(zram, &zram->stats.invalid_io);
bio_io_error(bio);
return sprintf(buf, "%llu\n", val);
}
-static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO,
+static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
disksize_show, disksize_store);
static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
-static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
if (msg->len < 128)
*--dp = (msg->len << 1) | EA;
else {
- *--dp = ((msg->len & 127) << 1) | EA;
- *--dp = (msg->len >> 6) & 0xfe;
+ *--dp = (msg->len >> 7); /* bits 7 - 15 */
+ *--dp = (msg->len & 127) << 1; /* bits 0 - 6 */
}
}
{
struct gsm_msg *msg;
msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype);
+ if (msg == NULL)
+ return;
msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */
msg->data[1] = (dlen << 1) | EA;
memcpy(msg->data + 2, data, dlen);
#ifdef CONFIG_INPUT
/* Simple translation table for the SysRq keys */
-static const unsigned char sysrq_xlate[KEY_MAX + 1] =
+static const unsigned char sysrq_xlate[KEY_CNT] =
"\000\0331234567890-=\177\t" /* 0x00 - 0x0f */
"qwertyuiop[]\r\000as" /* 0x10 - 0x1f */
"dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */
"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
"\r\000/"; /* 0x60 - 0x6f */
-static bool sysrq_down;
-static int sysrq_alt_use;
-static int sysrq_alt;
-static DEFINE_SPINLOCK(sysrq_event_lock);
+struct sysrq_state {
+ struct input_handle handle;
+ struct work_struct reinject_work;
+ unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];
+ unsigned int alt;
+ unsigned int alt_use;
+ bool active;
+ bool need_reinject;
+};
+
+static void sysrq_reinject_alt_sysrq(struct work_struct *work)
+{
+ struct sysrq_state *sysrq =
+ container_of(work, struct sysrq_state, reinject_work);
+ struct input_handle *handle = &sysrq->handle;
+ unsigned int alt_code = sysrq->alt_use;
+
+ if (sysrq->need_reinject) {
+ /* Simulate press and release of Alt + SysRq */
+ input_inject_event(handle, EV_KEY, alt_code, 1);
+ input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1);
+ input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+
+ input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0);
+ input_inject_event(handle, EV_KEY, alt_code, 0);
+ input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+ }
+}
-static bool sysrq_filter(struct input_handle *handle, unsigned int type,
- unsigned int code, int value)
+static bool sysrq_filter(struct input_handle *handle,
+ unsigned int type, unsigned int code, int value)
{
+ struct sysrq_state *sysrq = handle->private;
+ bool was_active = sysrq->active;
bool suppress;
- /* We are called with interrupts disabled, just take the lock */
- spin_lock(&sysrq_event_lock);
+ switch (type) {
- if (type != EV_KEY)
- goto out;
+ case EV_SYN:
+ suppress = false;
+ break;
- switch (code) {
+ case EV_KEY:
+ switch (code) {
- case KEY_LEFTALT:
- case KEY_RIGHTALT:
- if (value)
- sysrq_alt = code;
- else {
- if (sysrq_down && code == sysrq_alt_use)
- sysrq_down = false;
+ case KEY_LEFTALT:
+ case KEY_RIGHTALT:
+ if (!value) {
+ /* One of ALTs is being released */
+ if (sysrq->active && code == sysrq->alt_use)
+ sysrq->active = false;
- sysrq_alt = 0;
+ sysrq->alt = KEY_RESERVED;
+
+ } else if (value != 2) {
+ sysrq->alt = code;
+ sysrq->need_reinject = false;
+ }
+ break;
+
+ case KEY_SYSRQ:
+ if (value == 1 && sysrq->alt != KEY_RESERVED) {
+ sysrq->active = true;
+ sysrq->alt_use = sysrq->alt;
+ /*
+ * If nothing else will be pressed we'll need
+ * to * re-inject Alt-SysRq keysroke.
+ */
+ sysrq->need_reinject = true;
+ }
+
+ /*
+ * Pretend that sysrq was never pressed at all. This
+ * is needed to properly handle KGDB which will try
+ * to release all keys after exiting debugger. If we
+ * do not clear key bit it KGDB will end up sending
+ * release events for Alt and SysRq, potentially
+ * triggering print screen function.
+ */
+ if (sysrq->active)
+ clear_bit(KEY_SYSRQ, handle->dev->key);
+
+ break;
+
+ default:
+ if (sysrq->active && value && value != 2) {
+ sysrq->need_reinject = false;
+ __handle_sysrq(sysrq_xlate[code], true);
+ }
+ break;
}
- break;
- case KEY_SYSRQ:
- if (value == 1 && sysrq_alt) {
- sysrq_down = true;
- sysrq_alt_use = sysrq_alt;
+ suppress = sysrq->active;
+
+ if (!sysrq->active) {
+ /*
+ * If we are not suppressing key presses keep track of
+ * keyboard state so we can release keys that have been
+ * pressed before entering SysRq mode.
+ */
+ if (value)
+ set_bit(code, sysrq->key_down);
+ else
+ clear_bit(code, sysrq->key_down);
+
+ if (was_active)
+ schedule_work(&sysrq->reinject_work);
+
+ } else if (value == 0 &&
+ test_and_clear_bit(code, sysrq->key_down)) {
+ /*
+ * Pass on release events for keys that was pressed before
+ * entering SysRq mode.
+ */
+ suppress = false;
}
break;
default:
- if (sysrq_down && value && value != 2)
- __handle_sysrq(sysrq_xlate[code], true);
+ suppress = sysrq->active;
break;
}
-out:
- suppress = sysrq_down;
- spin_unlock(&sysrq_event_lock);
-
return suppress;
}
struct input_dev *dev,
const struct input_device_id *id)
{
- struct input_handle *handle;
+ struct sysrq_state *sysrq;
int error;
- sysrq_down = false;
- sysrq_alt = 0;
-
- handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
- if (!handle)
+ sysrq = kzalloc(sizeof(struct sysrq_state), GFP_KERNEL);
+ if (!sysrq)
return -ENOMEM;
- handle->dev = dev;
- handle->handler = handler;
- handle->name = "sysrq";
+ INIT_WORK(&sysrq->reinject_work, sysrq_reinject_alt_sysrq);
+
+ sysrq->handle.dev = dev;
+ sysrq->handle.handler = handler;
+ sysrq->handle.name = "sysrq";
+ sysrq->handle.private = sysrq;
- error = input_register_handle(handle);
+ error = input_register_handle(&sysrq->handle);
if (error) {
pr_err("Failed to register input sysrq handler, error %d\n",
error);
goto err_free;
}
- error = input_open_device(handle);
+ error = input_open_device(&sysrq->handle);
if (error) {
pr_err("Failed to open input device, error %d\n", error);
goto err_unregister;
return 0;
err_unregister:
- input_unregister_handle(handle);
+ input_unregister_handle(&sysrq->handle);
err_free:
- kfree(handle);
+ kfree(sysrq);
return error;
}
static void sysrq_disconnect(struct input_handle *handle)
{
+ struct sysrq_state *sysrq = handle->private;
+
input_close_device(handle);
+ cancel_work_sync(&sysrq->reinject_work);
input_unregister_handle(handle);
- kfree(handle);
+ kfree(sysrq);
}
/*
tty_lock();
+ /* some functions below drop BTM, so we need this bit */
+ set_bit(TTY_HUPPING, &tty->flags);
+
/* inuse_filps is protected by the single tty lock,
this really needs to change if we want to flush the
workqueue with the lock held */
}
spin_unlock(&tty_files_lock);
+ /*
+ * it drops BTM and thus races with reopen
+ * we protect the race by TTY_HUPPING
+ */
tty_ldisc_hangup(tty);
read_lock(&tasklist_lock);
tty->session = NULL;
tty->pgrp = NULL;
tty->ctrl_status = 0;
- set_bit(TTY_HUPPED, &tty->flags);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
/* Account for the p->signal references we killed */
* can't yet guarantee all that.
*/
set_bit(TTY_HUPPED, &tty->flags);
+ clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
tty_unlock();
{
struct tty_driver *driver = tty->driver;
- if (test_bit(TTY_CLOSING, &tty->flags))
+ if (test_bit(TTY_CLOSING, &tty->flags) ||
+ test_bit(TTY_HUPPING, &tty->flags) ||
+ test_bit(TTY_LDISC_CHANGING, &tty->flags))
return -EIO;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
/* BTM here locks versus a hangup event */
WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
+ if (ret)
+ clear_bit(TTY_LDISC_OPEN, &tty->flags);
return ret;
}
return 0;
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO
/*
* UIO Hilscher CIF card driver
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de>
*
* Licensed under GPL version 2 only.
* UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
* See http://www.hilscher.com for details.
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* (C) 2008 Manuel Traut <manut@linutronix.de>
*
* Licensed under GPL version 2 only.
goto err1;
}
- sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
- if (sc->kthread == ERR_PTR(-ENOMEM)) {
+ /* Create worker thread, but don't start it here. Start it after
+ * all usbatm generic initialization is done.
+ */
+ sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
+ if (IS_ERR(sc->kthread)) {
uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
goto err2;
}
return ret;
}
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
static ssize_t read_human_status(struct device *dev,
struct device_attribute *attr, char *buf)
return ret;
}
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
- read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
char *buf)
return ret;
}
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
#define UEA_ATTR(name, reset) \
\
static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *usb = interface_to_usbdev(intf);
+ int ret;
uea_enters(usb);
uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
if (UEA_IS_PREFIRM(id))
return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
- return usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+ ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+ if (ret == 0) {
+ struct usbatm_data *usbatm = usb_get_intfdata(intf);
+ struct uea_softc *sc = usbatm->driver_data;
+
+ /* Ensure carrier is initialized to off as early as possible */
+ UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
+
+ /* Only start the worker thread when all init is done */
+ wake_up_process(sc->kthread);
+ }
+
+ return ret;
}
static void uea_disconnect(struct usb_interface *intf)
* condition: callbacks we register can be executed at once, before we have
* initialized the struct atm_dev. To protect against this, all callbacks
* abort if atm_dev->dev_data is NULL. */
- atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
+ atm_dev = atm_dev_register(instance->driver_name,
+ &instance->usb_intf->dev, &usbatm_atm_devops,
+ -1, NULL);
if (!atm_dev) {
usb_err(instance, "%s: failed to register ATM device!\n", __func__);
return -1;
/* temp init ATM device, set to 128kbit */
atm_dev->link_rate = 128 * 1000 / 424;
- ret = sysfs_create_link(&atm_dev->class_dev.kobj,
- &instance->usb_intf->dev.kobj, "device");
- if (ret) {
- atm_err(instance, "%s: sysfs_create_link failed: %d\n",
- __func__, ret);
- goto fail_sysfs;
- }
-
if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
goto fail;
return 0;
fail:
- sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
- fail_sysfs:
instance->atm_dev = NULL;
atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
return ret;
/* ATM finalize */
if (instance->atm_dev) {
- sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
atm_dev_deregister(instance->atm_dev);
instance->atm_dev = NULL;
}
If you are unsure about this, say N here.
config USB_OTG
- bool
+ bool "OTG support"
depends on USB && EXPERIMENTAL
depends on USB_SUSPEND
default n
-
+ help
+ The most notable feature of USB OTG is support for a
+ "Dual-Role" device, which can act as either a device
+ or a host. The initial role is decided by the type of
+ plug inserted and can be changed later when two dual
+ role devices talk to each other.
+
+ Select this only if your board has Mini-AB/Micro-AB
+ connector.
config USB_OTG_WHITELIST
bool "Rely on OTG Targeted Peripherals List"
#include <linux/gfp.h>
#include <linux/poll.h>
#include <linux/usb.h>
-#include <linux/smp_lock.h>
#include <linux/usbdevice_fs.h>
#include <linux/usb/hcd.h>
#include <linux/mutex.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/signal.h>
#include <linux/poll.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/rwsem.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include "usb.h"
*/
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ if (hcd->self.uses_pio_for_control)
+ return ret;
if (hcd->self.uses_dma) {
urb->setup_dma = dma_map_single(
hcd->self.controller,
#include <linux/parser.h>
#include <linux/notifier.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/usb/hcd.h>
#include <asm/byteorder.h>
#include "usb.h"
}
} else {
/* gpio_request fail so use -EINVAL for gpio_is_valid */
- ubc->vbus_pin = -EINVAL;
+ udc->vbus_pin = -EINVAL;
}
}
kfree(cdev->req->buf);
usb_ep_free_request(gadget->ep0, cdev->req);
}
+ device_remove_file(&gadget->dev, &dev_attr_suspended);
kfree(cdev);
set_gadget_data(gadget, NULL);
- device_remove_file(&gadget->dev, &dev_attr_suspended);
composite = NULL;
}
*/
usb_ep_autoconfig_reset(cdev->gadget);
- /* standardized runtime overrides for device ID data */
- if (idVendor)
- cdev->desc.idVendor = cpu_to_le16(idVendor);
- if (idProduct)
- cdev->desc.idProduct = cpu_to_le16(idProduct);
- if (bcdDevice)
- cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
/* composite gadget needs to assign strings for whole device (like
* serial number), register function drivers, potentially update
* power state and consumption, etc
cdev->desc = *composite->dev;
cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ /* standardized runtime overrides for device ID data */
+ if (idVendor)
+ cdev->desc.idVendor = cpu_to_le16(idVendor);
+ if (idProduct)
+ cdev->desc.idProduct = cpu_to_le16(idProduct);
+ if (bcdDevice)
+ cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
/* stirng overrides */
if (iManufacturer || !cdev->desc.iManufacturer) {
if (!iManufacturer && !composite->iManufacturer &&
#include <linux/blkdev.h>
#include <linux/pagemap.h>
#include <asm/unaligned.h>
-#include <linux/smp_lock.h>
#include <linux/usb/composite.h>
#include <linux/usb/functionfs.h>
#include <linux/cdev.h>
#include <linux/mutex.h>
#include <linux/poll.h>
-#include <linux/smp_lock.h>
#include <linux/uaccess.h>
#include <linux/wait.h>
#include <linux/usb/g_hid.h>
&debug_registers_fops))
goto file_error;
- if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+ if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
&debug_lpm_fops))
goto file_error;
tmp && tmp != qh;
tmp = tmp->qh_next.qh)
continue;
- /* periodic qh self-unlinks on empty */
- if (!tmp)
- goto nogood;
- unlink_async (ehci, qh);
+ /* periodic qh self-unlinks on empty, and a COMPLETING qh
+ * may already be unlinked.
+ */
+ if (tmp)
+ unlink_async(ehci, qh);
/* FALL THROUGH */
case QH_STATE_UNLINK: /* wait for hw to finish? */
case QH_STATE_UNLINK_WAIT:
}
/* else FALL THROUGH */
default:
-nogood:
/* caller was supposed to have unlinked any requests;
* that's not our job. just leak this memory.
*/
qh_put (ehci->async);
ehci->async = NULL;
+ if (ehci->dummy)
+ qh_put(ehci->dummy);
+ ehci->dummy = NULL;
+
/* DMA consistent memory and pools */
if (ehci->qtd_pool)
dma_pool_destroy (ehci->qtd_pool);
if (ehci->periodic == NULL) {
goto fail;
}
- for (i = 0; i < ehci->periodic_size; i++)
- ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+ if (ehci->use_dummy_qh) {
+ struct ehci_qh_hw *hw;
+ ehci->dummy = ehci_qh_alloc(ehci, flags);
+ if (!ehci->dummy)
+ goto fail;
+
+ hw = ehci->dummy->hw;
+ hw->hw_next = EHCI_LIST_END(ehci);
+ hw->hw_qtd_next = EHCI_LIST_END(ehci);
+ hw->hw_alt_next = EHCI_LIST_END(ehci);
+ hw->hw_token &= ~QTD_STS_ACTIVE;
+ ehci->dummy->hw = hw;
+
+ for (i = 0; i < ehci->periodic_size; i++)
+ ehci->periodic[i] = ehci->dummy->qh_dma;
+ } else {
+ for (i = 0; i < ehci->periodic_size; i++)
+ ehci->periodic[i] = EHCI_LIST_END(ehci);
+ }
/* software shadow of hardware table */
ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
if (retval)
return retval;
+ if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+ (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+ /* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+ * read/write memory space which does not belong to it when
+ * there is NULL pointer with T-bit set to 1 in the frame list
+ * table. To avoid the issue, the frame list link pointer
+ * should always contain a valid pointer to a inactive qh.
+ */
+ ehci->use_dummy_qh = 1;
+ ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+ "dummy qh workaround\n");
+ }
+
/* data structure init */
retval = ehci_init(hcd);
if (retval)
if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
+
+ /* MCP89 chips on the MacBookAir3,1 give EPROTO when
+ * fetching device descriptors unless LPM is disabled.
+ * There are also intermittent problems enumerating
+ * devices with PPCD enabled.
+ */
+ case 0x0d9d:
+ ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+ ehci->has_lpm = 0;
+ ehci->has_ppcd = 0;
+ ehci->command &= ~CMD_PPCEE;
+ break;
}
break;
case PCI_VENDOR_ID_VIA:
*/
*prev_p = *periodic_next_shadow(ehci, &here,
Q_NEXT_TYPE(ehci, *hw_p));
- *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+ if (!ehci->use_dummy_qh ||
+ *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+ != EHCI_LIST_END(ehci))
+ *hw_p = *shadow_next_periodic(ehci, &here,
+ Q_NEXT_TYPE(ehci, *hw_p));
+ else
+ *hw_p = ehci->dummy->qh_dma;
}
/* how many of the uframe's 125 usecs are allocated? */
* pointer for much longer, if at all.
*/
*q_p = q.itd->itd_next;
- *hw_p = q.itd->hw_next;
+ if (!ehci->use_dummy_qh ||
+ q.itd->hw_next != EHCI_LIST_END(ehci))
+ *hw_p = q.itd->hw_next;
+ else
+ *hw_p = ehci->dummy->qh_dma;
type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
wmb();
modified = itd_complete (ehci, q.itd);
* URB completion.
*/
*q_p = q.sitd->sitd_next;
- *hw_p = q.sitd->hw_next;
+ if (!ehci->use_dummy_qh ||
+ q.sitd->hw_next != EHCI_LIST_END(ehci))
+ *hw_p = q.sitd->hw_next;
+ else
+ *hw_p = ehci->dummy->qh_dma;
type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
wmb();
modified = sitd_complete (ehci, q.sitd);
/* async schedule support */
struct ehci_qh *async;
+ struct ehci_qh *dummy; /* For AMD quirk use */
struct ehci_qh *reclaim;
unsigned scanning : 1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
unsigned fs_i_thresh:1; /* Intel iso scheduling */
+ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
return 0;
}
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct isp1362_hcd *isp1362_hcd;
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/debugfs.h>
-#include <linux/smp_lock.h>
#include <asm/io.h>
#include "uhci-hcd.h"
static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
u32 __iomem *addr, u32 port_status)
{
+ /* Don't allow the USB core to disable SuperSpeed ports. */
+ if (xhci->port_array[wIndex] == 0x03) {
+ xhci_dbg(xhci, "Ignoring request to disable "
+ "SuperSpeed port.\n");
+ return;
+ }
+
/* Write 1 to disable the port */
xhci_writel(xhci, port_status | PORT_PE, addr);
port_status = xhci_readl(xhci, addr);
if (udev->speed == USB_SPEED_SUPER)
return ep->ss_ep_comp.wBytesPerInterval;
- max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
/* A 0 in max burst means 1 transfer per ESIT */
return max_packet * (max_burst + 1);
/* Fall through */
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
break;
default:
xhci->dcbaa = NULL;
scratchpad_free(xhci);
+
+ xhci->num_usb2_ports = 0;
+ xhci->num_usb3_ports = 0;
+ kfree(xhci->usb2_ports);
+ kfree(xhci->usb3_ports);
+ kfree(xhci->port_array);
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_suspended = 0;
&xhci->ir_set->erst_dequeue);
}
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+ u32 __iomem *addr, u8 major_revision)
+{
+ u32 temp, port_offset, port_count;
+ int i;
+
+ if (major_revision > 0x03) {
+ xhci_warn(xhci, "Ignoring unknown port speed, "
+ "Ext Cap %p, revision = 0x%x\n",
+ addr, major_revision);
+ /* Ignoring port protocol we can't understand. FIXME */
+ return;
+ }
+
+ /* Port offset and count in the third dword, see section 7.2 */
+ temp = xhci_readl(xhci, addr + 2);
+ port_offset = XHCI_EXT_PORT_OFF(temp);
+ port_count = XHCI_EXT_PORT_COUNT(temp);
+ xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+ "count = %u, revision = 0x%x\n",
+ addr, port_offset, port_count, major_revision);
+ /* Port count includes the current port offset */
+ if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+ /* WTF? "Valid values are ‘1’ to MaxPorts" */
+ return;
+ port_offset--;
+ for (i = port_offset; i < (port_offset + port_count); i++) {
+ /* Duplicate entry. Ignore the port if the revisions differ. */
+ if (xhci->port_array[i] != 0) {
+ xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+ " port %u\n", addr, i);
+ xhci_warn(xhci, "Port was marked as USB %u, "
+ "duplicated as USB %u\n",
+ xhci->port_array[i], major_revision);
+ /* Only adjust the roothub port counts if we haven't
+ * found a similar duplicate.
+ */
+ if (xhci->port_array[i] != major_revision &&
+ xhci->port_array[i] != (u8) -1) {
+ if (xhci->port_array[i] == 0x03)
+ xhci->num_usb3_ports--;
+ else
+ xhci->num_usb2_ports--;
+ xhci->port_array[i] = (u8) -1;
+ }
+ /* FIXME: Should we disable the port? */
+ continue;
+ }
+ xhci->port_array[i] = major_revision;
+ if (major_revision == 0x03)
+ xhci->num_usb3_ports++;
+ else
+ xhci->num_usb2_ports++;
+ }
+ /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be. We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+ u32 __iomem *addr;
+ u32 offset;
+ unsigned int num_ports;
+ int i, port_index;
+
+ addr = &xhci->cap_regs->hcc_params;
+ offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ if (offset == 0) {
+ xhci_err(xhci, "No Extended Capability registers, "
+ "unable to set up roothub.\n");
+ return -ENODEV;
+ }
+
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+ if (!xhci->port_array)
+ return -ENOMEM;
+
+ /*
+ * For whatever reason, the first capability offset is from the
+ * capability register base, not from the HCCPARAMS register.
+ * See section 5.3.6 for offset calculation.
+ */
+ addr = &xhci->cap_regs->hc_capbase + offset;
+ while (1) {
+ u32 cap_id;
+
+ cap_id = xhci_readl(xhci, addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ xhci_add_in_port(xhci, num_ports, addr,
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+ == num_ports)
+ break;
+ /*
+ * Once you're into the Extended Capabilities, the offset is
+ * always relative to the register holding the offset.
+ */
+ addr += offset;
+ }
+
+ if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+ xhci_warn(xhci, "No ports on the roothubs?\n");
+ return -ENODEV;
+ }
+ xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+ xhci->num_usb2_ports, xhci->num_usb3_ports);
+ /*
+ * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+ * Not sure how the USB core will handle a hub with no ports...
+ */
+ if (xhci->num_usb2_ports) {
+ xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+ xhci->num_usb2_ports, flags);
+ if (!xhci->usb2_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++) {
+ if (xhci->port_array[i] == 0x03 ||
+ xhci->port_array[i] == 0 ||
+ xhci->port_array[i] == -1)
+ continue;
+
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
+ }
+ if (xhci->num_usb3_ports) {
+ xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+ xhci->num_usb3_ports, flags);
+ if (!xhci->usb3_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] == 0x03) {
+ xhci->usb3_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 3.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb3_ports[port_index]);
+ port_index++;
+ }
+ }
+ return 0;
+}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
if (scratchpad_alloc(xhci, flags))
goto fail;
+ if (xhci_setup_port_arrays(xhci, flags))
+ goto fail;
return 0;
if (!(status & STS_EINT)) {
spin_unlock(&xhci->lock);
- xhci_warn(xhci, "Spurious interrupt.\n");
return IRQ_NONE;
}
xhci_dbg(xhci, "op reg status = %08x\n", status);
xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
}
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+ u64 val_64;
+
+ /* step 2: initialize command ring buffer */
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue) &
+ (u64) ~CMD_RING_RSVD_BITS) |
+ xhci->cmd_ring->cycle_state;
+ xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+ (long unsigned long) val_64);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume. Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register. Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+ struct xhci_ring *ring;
+ struct xhci_segment *seg;
+
+ ring = xhci->cmd_ring;
+ seg = ring->deq_seg;
+ do {
+ memset(seg->trbs, 0, SEGMENT_SIZE);
+ seg = seg->next;
+ } while (seg != ring->deq_seg);
+
+ /* Reset the software enqueue and dequeue pointers */
+ ring->deq_seg = ring->first_seg;
+ ring->dequeue = ring->first_seg->trbs;
+ ring->enq_seg = ring->deq_seg;
+ ring->enqueue = ring->dequeue;
+
+ /*
+ * Ring is now zeroed, so the HW should look for change of ownership
+ * when the cycle bit is set to 1.
+ */
+ ring->cycle_state = 1;
+
+ /*
+ * Reset the hardware dequeue pointer.
+ * Yes, this will need to be re-written after resume, but we're paranoid
+ * and want to make sure the hardware doesn't access bogus memory
+ * because, say, the BIOS or an SMI started the host without changing
+ * the command ring pointers.
+ */
+ xhci_set_cmd_ring_deq(xhci);
+}
+
/*
* Stop HC (not bus-specific)
*
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
+ xhci_clear_command_ring(xhci);
/* step 3: save registers */
xhci_save_registers(xhci);
u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- u64 val_64;
int old_state, retval;
old_state = hcd->state;
/* step 1: restore register */
xhci_restore_registers(xhci);
/* step 2: initialize command ring buffer */
- val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
- val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
- (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
- xhci->cmd_ring->dequeue) &
- (u64) ~CMD_RING_RSVD_BITS) |
- xhci->cmd_ring->cycle_state;
- xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
- (long unsigned long) val_64);
- xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+ xhci_set_cmd_ring_deq(xhci);
/* step 3: restore state and start state*/
/* step 3: set CRS flag */
command = xhci_readl(xhci, &xhci->op_regs->command);
return retval;
}
+ spin_unlock_irq(&xhci->lock);
/* Re-setup MSI-X */
if (hcd->irq)
free_irq(hcd->irq, hcd);
hcd->irq = pdev->irq;
}
+ spin_lock_irq(&xhci->lock);
/* step 4: set Run/Stop bit */
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_RUN;
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ command->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ reset_device_cmd->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, slot_id);
if (ret) {
#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16)
+/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
#define MAX_PACKET_MASK (0xffff << 16)
#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p) ((p) & 0x7ff)
+
/* tx_info bitmasks */
#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
u32 suspended_ports[8]; /* which ports are
suspended */
unsigned long resume_done[MAX_HC_PORTS];
+ /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+ u8 *port_array;
+ /* Array of pointers to USB 3.0 PORTSC registers */
+ u32 __iomem **usb3_ports;
+ unsigned int num_usb3_ports;
+ /* Array of pointers to USB 2.0 PORTSC registers */
+ u32 __iomem **usb2_ports;
+ unsigned int num_usb2_ports;
};
/* For testing purposes */
}
static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback);
+mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb);
static void mts_transfer_cleanup( struct urb *transfer );
static void mts_do_sg(struct urb * transfer);
static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
+mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
{
struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
int err = 0;
return err;
}
+static DEF_SCSI_QCMD(mts_scsi_queuecommand)
+
static struct scsi_host_template mts_scsi_host_template = {
.module = THIS_MODULE,
.name = "microtekX6",
return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
}
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
- get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
- get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
static int cypress_probe(struct usb_interface *interface,
return count;
}
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
static int tv_probe(struct usb_interface *interface,
const struct usb_device_id *id)
change_color(led); \
return count; \
} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
show_set(blue);
show_set(red);
show_set(green);
\
return count; \
} \
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
static ssize_t show_attr_text(struct device *dev,
struct device_attribute *attr, char *buf)
return count;
}
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
static ssize_t show_attr_decimals(struct device *dev,
struct device_attribute *attr, char *buf)
return count;
}
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
- show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
static ssize_t show_attr_textmode(struct device *dev,
struct device_attribute *attr, char *buf)
return -EINVAL;
}
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
- show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
/*
* uss720.c -- USS720 USB Parport Cable.
*
- * Copyright (C) 1999, 2005
+ * Copyright (C) 1999, 2005, 2010
* Thomas Sailer (t.sailer@alumni.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
{ USB_DEVICE(0x0557, 0x2001) },
{ USB_DEVICE(0x0729, 0x1284) },
{ USB_DEVICE(0x1293, 0x0002) },
+ { USB_DEVICE(0x1293, 0x0002) },
+ { USB_DEVICE(0x050d, 0x0002) },
{ } /* Terminating entry */
};
.open = yurex_open,
.release = yurex_release,
.fasync = yurex_fasync,
+ .llseek = default_llseek,
};
#include <linux/poll.h>
#include <linux/compat.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include "usb_mon.h"
* Otherwise, wait till the gadget driver hooks up.
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ hcd->self.uses_pio_for_control = 1;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb_readb(musb->mregs, MUSB_DEVCTL),
/* ----------------------------------------------------------------------- */
+/* Maps the buffer to dma */
+
+static inline void map_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ request->request.dma = dma_map_single(
+ musb->controller,
+ request->request.buf,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 1;
+ } else {
+ dma_sync_single_for_device(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 0;
+ }
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ DBG(20, "not unmapping a never mapped buffer\n");
+ return;
+ }
+ if (request->mapped) {
+ dma_unmap_single(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->request.dma = DMA_ADDR_INVALID;
+ request->mapped = 0;
+ } else {
+ dma_sync_single_for_cpu(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ }
+}
+
/*
* Immediately complete a request.
*
ep->busy = 1;
spin_unlock(&musb->lock);
- if (is_dma_capable()) {
- if (req->mapped) {
- dma_unmap_single(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->request.dma = DMA_ADDR_INVALID;
- req->mapped = 0;
- } else if (req->request.dma != DMA_ADDR_INVALID)
- dma_sync_single_for_cpu(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
+ if (is_dma_capable() && ep->dma)
+ unmap_dma_buffer(req, musb);
if (request->status == 0)
DBG(5, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
#endif
if (!use_dma) {
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails
+ */
+ if (is_dma_capable() && musb_ep->dma)
+ unmap_dma_buffer(req, musb);
+
musb_write_fifo(musb_ep->hw_ep, fifo_count,
(u8 *) (request->buf + request->actual));
request->actual += fifo_count;
return;
}
#endif
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails. This buffer is mapped if the
+ * channel allocation is successful
+ */
+ if (is_dma_capable() && musb_ep->dma) {
+ unmap_dma_buffer(req, musb);
+
+ /*
+ * Clear DMAENAB and AUTOCLEAR for the
+ * PIO mode transfer
+ */
+ csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
(request->buf + request->actual));
if (!request)
return;
}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
exit:
+#endif
/* Analyze request */
rxstate(musb, to_musb_request(request));
}
request->epnum = musb_ep->current_epnum;
request->tx = musb_ep->is_in;
- if (is_dma_capable() && musb_ep->dma) {
- if (request->request.dma == DMA_ADDR_INVALID) {
- request->request.dma = dma_map_single(
- musb->controller,
- request->request.buf,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 1;
- } else {
- dma_sync_single_for_device(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 0;
- }
- } else
+ if (is_dma_capable() && musb_ep->dma)
+ map_dma_buffer(request, musb);
+ else
request->mapped = 0;
spin_lock_irqsave(&musb->lock, lockflags);
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
DBG(3, "OTG startup...\n");
/* REVISIT: funcall to other code, which also
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ hcd->self.uses_pio_for_control = 1;
}
}
}
}
return count;
}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
static ssize_t
get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
}
return count;
}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
- get_a_bus_drop, set_a_bus_drop);
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
static ssize_t
get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
}
return count;
}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
static ssize_t
set_a_clr_err(struct device *dev, struct device_attribute *attr,
}
return count;
}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
static struct attribute *inputs_attrs[] = {
&dev_attr_a_bus_req.attr,
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+ { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
/* Lenz LI-USB Computer Interface. */
#define FTDI_LENZ_LIUSB_PID 0xD780
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID 0xF070
+
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
#define MJSG_XM_RADIO_PID 0x937A
#define MJSG_HD_RADIO_PID 0x937C
+/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
/*
* Xverve Signalyzer tools (http://www.signalyzer.com/)
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.no_dynamic_id = 1,
+ .supports_autosuspend = 1,
};
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
return -ENODEV;
fixup_generic(driver);
+ if (driver->usb_driver)
+ driver->usb_driver->supports_autosuspend = 1;
if (!driver->description)
driver->description = driver->driver.name;
/* queue a command */
/* This is always called with scsi_lock(host) held */
-static int queuecommand(struct scsi_cmnd *srb,
+static int queuecommand_lck(struct scsi_cmnd *srb,
void (*done)(struct scsi_cmnd *))
{
struct us_data *us = host_to_us(srb->device->host);
return 0;
}
+static DEF_SCSI_QCMD(queuecommand)
+
/***********************************************************************
* Error handling functions
***********************************************************************/
}
return result;
}
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
int sierra_ms_init(struct us_data *us)
{
return 0;
}
-static int uas_queuecommand(struct scsi_cmnd *cmnd,
+static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
void (*done)(struct scsi_cmnd *))
{
struct scsi_device *sdev = cmnd->device;
return 0;
}
+static DEF_SCSI_QCMD(uas_queuecommand)
+
static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
{
struct scsi_device *sdev = cmnd->device;
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999,
+ "Samsung",
+ "YP-CP3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
size_t hdr_size;
struct socket *sock;
- sock = rcu_dereference_check(vq->private_data,
- lockdep_is_held(&vq->mutex));
+ /* TODO: check that we are running from vhost_worker?
+ * Not sure it's worth it, it's straight-forward enough. */
+ sock = rcu_dereference_check(vq->private_data, 1);
if (!sock)
return;
int r;
if (!write_length)
return 0;
+ write_length += write_address % VHOST_PAGE_SIZE;
write_address /= VHOST_PAGE_SIZE;
for (;;) {
u64 base = (u64)(unsigned long)log_base;
if (write_length <= VHOST_PAGE_SIZE)
break;
write_length -= VHOST_PAGE_SIZE;
- write_address += VHOST_PAGE_SIZE;
+ write_address += 1;
}
return r;
}
{
struct backlight_device *bd = to_backlight_device(dev);
- if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
- mutex_lock(&bd->ops_lock);
+ mutex_lock(&bd->ops_lock);
+ if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
bd->props.state |= BL_CORE_SUSPENDED;
backlight_update_status(bd);
- mutex_unlock(&bd->ops_lock);
}
+ mutex_unlock(&bd->ops_lock);
return 0;
}
{
struct backlight_device *bd = to_backlight_device(dev);
- if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
- mutex_lock(&bd->ops_lock);
+ mutex_lock(&bd->ops_lock);
+ if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
bd->props.state &= ~BL_CORE_SUSPENDED;
backlight_update_status(bd);
- mutex_unlock(&bd->ops_lock);
}
+ mutex_unlock(&bd->ops_lock);
return 0;
}
backlight_device_unregister(crp->cr_backlight_device);
lcd_device_unregister(crp->cr_lcd_device);
pci_dev_put(lpc_dev);
+ kfree(crp);
return 0;
}
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/screen_info.h>
-#include <linux/smp_lock.h>
#include <video/vga.h>
#include <asm/io.h>
goto err_release_pl_mem;
}
- ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
- if (ret)
- goto err_release_pl_mem;
-
/* Initialize par */
da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
if (ret)
- goto err_free_irq;
+ goto err_release_pl_mem;
da8xx_fb_info->cmap.len = par->palette_sz;
/* initialize var_screeninfo */
goto err_cpu_freq;
}
#endif
+
+ ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+ if (ret)
+ goto irq_freq;
return 0;
+irq_freq:
#ifdef CONFIG_CPU_FREQ
err_cpu_freq:
unregister_framebuffer(da8xx_fb_info);
err_dealloc_cmap:
fb_dealloc_cmap(&da8xx_fb_info->cmap);
-err_free_irq:
- free_irq(par->irq, par);
-
err_release_pl_mem:
dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
par->p_palette_base);
* @cmap: frame buffer colormap structure
* @len: length of @cmap
* @transp: boolean, 1 if there is transparency, 0 otherwise
+ * @flags: flags for kmalloc memory allocation
*
* Allocates memory for a colormap @cmap. @len is the
* number of entries in the palette.
*
*/
-int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags)
{
- int size = len*sizeof(u16);
-
- if (cmap->len != len) {
- fb_dealloc_cmap(cmap);
- if (!len)
- return 0;
- if (!(cmap->red = kmalloc(size, GFP_ATOMIC)))
- goto fail;
- if (!(cmap->green = kmalloc(size, GFP_ATOMIC)))
- goto fail;
- if (!(cmap->blue = kmalloc(size, GFP_ATOMIC)))
- goto fail;
- if (transp) {
- if (!(cmap->transp = kmalloc(size, GFP_ATOMIC)))
+ int size = len * sizeof(u16);
+ int ret = -ENOMEM;
+
+ if (cmap->len != len) {
+ fb_dealloc_cmap(cmap);
+ if (!len)
+ return 0;
+
+ cmap->red = kmalloc(size, flags);
+ if (!cmap->red)
+ goto fail;
+ cmap->green = kmalloc(size, flags);
+ if (!cmap->green)
+ goto fail;
+ cmap->blue = kmalloc(size, flags);
+ if (!cmap->blue)
+ goto fail;
+ if (transp) {
+ cmap->transp = kmalloc(size, flags);
+ if (!cmap->transp)
+ goto fail;
+ } else {
+ cmap->transp = NULL;
+ }
+ }
+ cmap->start = 0;
+ cmap->len = len;
+ ret = fb_copy_cmap(fb_default_cmap(len), cmap);
+ if (ret)
goto fail;
- } else
- cmap->transp = NULL;
- }
- cmap->start = 0;
- cmap->len = len;
- fb_copy_cmap(fb_default_cmap(len), cmap);
- return 0;
+ return 0;
fail:
- fb_dealloc_cmap(cmap);
- return -ENOMEM;
+ fb_dealloc_cmap(cmap);
+ return ret;
+}
+
+int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+{
+ return fb_alloc_cmap_gfp(cmap, len, transp, GFP_ATOMIC);
}
/**
int rc, size = cmap->len * sizeof(u16);
struct fb_cmap umap;
+ if (size < 0 || size < cmap->len)
+ return -E2BIG;
+
memset(&umap, 0, sizeof(struct fb_cmap));
- rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
+ rc = fb_alloc_cmap_gfp(&umap, cmap->len, cmap->transp != NULL,
+ GFP_KERNEL);
if (rc)
return rc;
if (copy_from_user(umap.red, cmap->red, size) ||
if (gen->base == hw->base)
return true;
/* is the generic aperture base inside the hw base->hw base+size */
- if (gen->base > hw->base && gen->base <= hw->base + hw->size)
+ if (gen->base > hw->base && gen->base < hw->base + hw->size)
return true;
return false;
}
#define DC_HFILT_COUNT 0x100
#define DC_VFILT_COUNT 0x100
#define VP_COEFF_SIZE 0x1000
+#define VP_PAL_COUNT 0x100
#define OUTPUT_CRT 0x01
#define OUTPUT_PANEL 0x02
uint64_t vp[VP_REG_COUNT];
uint64_t fp[FP_REG_COUNT];
- uint32_t pal[DC_PAL_COUNT];
+ uint32_t dc_pal[DC_PAL_COUNT];
+ uint32_t vp_pal[VP_PAL_COUNT];
uint32_t hcoeff[DC_HFILT_COUNT * 2];
uint32_t vcoeff[DC_VFILT_COUNT];
uint32_t vp_coeff[VP_COEFF_SIZE / 4];
write_fp(par, FP_PT1, 0);
temp = FP_PT2_SCRC;
- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
temp |= FP_PT2_HSP;
- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
temp |= FP_PT2_VSP;
write_fp(par, FP_PT2, temp);
memcpy(par->vp, par->vp_regs, sizeof(par->vp));
memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
- /* save the palette */
+ /* save the display controller palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- par->pal[i] = read_dc(par, DC_PAL_DATA);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+ /* save the video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ par->vp_pal[i] = read_vp(par, VP_PDR);
/* save the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
/* restore the palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- write_dc(par, DC_PAL_DATA, par->pal[i]);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
/* restore the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
}
}
+ /* restore video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ write_vp(par, VP_PDR, par->vp_pal[i]);
+
/* restore video coeff ram */
memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
}
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#ifdef CONFIG_ARCH_MX1
-#define SIZE_YMAX(y) ((y) & 0x1ff)
-#else
-#define SIZE_YMAX(y) ((y) & 0x3ff)
-#endif
+#define YMAX_MASK (cpu_is_mx1() ? 0x1ff : 0x3ff)
+#define SIZE_YMAX(y) ((y) & YMAX_MASK)
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
if (var->right_margin > 255)
printk(KERN_ERR "%s: invalid right_margin %d\n",
info->fix.id, var->right_margin);
- if (var->yres < 1 || var->yres > 511)
+ if (var->yres < 1 || var->yres > YMAX_MASK)
printk(KERN_ERR "%s: invalid yres %d\n",
info->fix.id, var->yres);
if (var->vsync_len > 100)
abs(cmode->yres - mode->yres);
if (diff > d) {
diff = d;
+ diff_refresh = abs(cmode->refresh - mode->refresh);
best = cmode;
} else if (diff == d) {
d = abs(cmode->refresh - mode->refresh);
#include <linux/clk.h>
#include <linux/mutex.h>
+#include <mach/dma.h>
#include <mach/hardware.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
struct device *dev;
struct mx3fb_platform_data *mx3fb_pdata;
+ if (!imx_dma_is_ipu(chan))
+ return false;
+
if (!rq)
return false;
config FB_OMAP
tristate "OMAP frame buffer support (EXPERIMENTAL)"
- depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
-
+ depends on FB && (OMAP2_DSS = "n")
+ depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
if (!size)
return;
- size = PAGE_ALIGN(size);
+ size = ALIGN(size, SZ_2M);
if (paddr) {
- if ((paddr & ~PAGE_MASK) ||
- !memblock_is_region_memory(paddr, size)) {
- pr_err("Illegal SDRAM region for VRAM\n");
+ if (paddr & ~PAGE_MASK) {
+ pr_err("VRAM start address 0x%08x not page aligned\n",
+ paddr);
+ return;
+ }
+
+ if (!memblock_is_region_memory(paddr, size)) {
+ pr_err("Illegal SDRAM region 0x%08x..0x%08x for VRAM\n",
+ paddr, paddr + size - 1);
return;
}
return;
}
} else {
- paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
+ paddr = memblock_alloc(size, SZ_2M);
}
+ memblock_free(paddr, size);
+ memblock_remove(paddr, size);
+
omap_vram_add_region(paddr, size);
pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_HW_B_RIVA;
chan->adapter.class = i2c_class;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pdev->dev;
found_rate_error = rate_error;
}
+ hdmi->var.width = hdmi->monspec.max_x * 10;
+ hdmi->var.height = hdmi->monspec.max_y * 10;
+
/*
* TODO 1: if no ->info is present, postpone running the config until
* after ->info first gets registered.
dev_dbg(info->dev, "Old %ux%u, new %ux%u\n",
mode1.xres, mode1.yres, mode2.xres, mode2.yres);
- if (fb_mode_is_equal(&mode1, &mode2))
+ if (fb_mode_is_equal(&mode1, &mode2)) {
+ /* It can be a different monitor with an equal video-mode */
+ old_var->width = new_var->width;
+ old_var->height = new_var->height;
return false;
+ }
dev_dbg(info->dev, "Switching %u -> %u lines\n",
mode1.yres, mode2.yres);
* on, if we run a resume here, the logo disappears
*/
if (lock_fb_info(hdmi->info)) {
- sh_hdmi_display_on(hdmi, hdmi->info);
- unlock_fb_info(hdmi->info);
+ struct fb_info *info = hdmi->info;
+ info->var.width = hdmi->var.width;
+ info->var.height = hdmi->var.height;
+ sh_hdmi_display_on(hdmi, info);
+ unlock_fb_info(info);
}
} else {
/* New monitor or have to wake up */
if (!hdmi->info)
goto out;
+ hdmi->monspec.modedb_len = 0;
+ fb_destroy_modedb(hdmi->monspec.modedb);
+ hdmi->monspec.modedb = NULL;
+
acquire_console_sem();
/* HDMI disconnect */
release_console_sem();
pm_runtime_put(hdmi->dev);
- fb_destroy_modedb(hdmi->monspec.modedb);
}
out:
};
#define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
-#define DEFAULT_XRES 1280
-#define DEFAULT_YRES 1024
+#define MAX_XRES 1920
+#define MAX_YRES 1080
static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
[LDDCKPAT1R] = 0x400,
.xres = 1280,
.yres = 720,
- .left_margin = 200,
- .right_margin = 88,
- .hsync_len = 48,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.pixclock = 13468,
+ .refresh = 60,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
};
/* Couldn't reconfigure, hopefully, can continue as before */
return;
- info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8);
+ info->fix.line_length = mode1.xres * (ch->cfg.bpp / 8);
/*
* fb_set_var() calls the notifier change internally, only if
* user event, we have to call the chain ourselves.
*/
event.info = info;
- event.data = &mode2;
+ event.data = &mode1;
fb_notifier_call_chain(evnt, &event);
}
{
struct sh_mobile_lcdc_chan *ch = info->par;
- if (var->xres < 160 || var->xres > 1920 ||
- var->yres < 120 || var->yres > 1080 ||
- var->left_margin < 32 || var->left_margin > 320 ||
- var->right_margin < 12 || var->right_margin > 240 ||
- var->upper_margin < 12 || var->upper_margin > 120 ||
- var->lower_margin < 1 || var->lower_margin > 64 ||
- var->hsync_len < 32 || var->hsync_len > 240 ||
- var->vsync_len < 2 || var->vsync_len > 64 ||
- var->pixclock < 6000 || var->pixclock > 40000 ||
+ if (var->xres > MAX_XRES || var->yres > MAX_YRES ||
var->xres * var->yres * (ch->cfg.bpp / 8) * 2 > info->fix.smem_len) {
- dev_warn(info->dev, "Invalid info: %u %u %u %u %u %u %u %u %u!\n",
- var->xres, var->yres,
- var->left_margin, var->right_margin,
- var->upper_margin, var->lower_margin,
- var->hsync_len, var->vsync_len,
- var->pixclock);
+ dev_warn(info->dev, "Invalid info: %u-%u-%u-%u x %u-%u-%u-%u @ %ukHz!\n",
+ var->left_margin, var->xres, var->right_margin, var->hsync_len,
+ var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
+ PICOS2KHZ(var->pixclock));
return -EINVAL;
}
return 0;
const struct fb_videomode *mode = cfg->lcd_cfg;
unsigned long max_size = 0;
int k;
+ int num_cfg;
ch->info = framebuffer_alloc(0, &pdev->dev);
if (!ch->info) {
}
if (!mode)
- max_size = DEFAULT_XRES * DEFAULT_YRES;
+ max_size = MAX_XRES * MAX_YRES;
else if (max_cfg)
dev_dbg(&pdev->dev, "Found largest videomode %ux%u\n",
max_cfg->xres, max_cfg->yres);
info->fix = sh_mobile_lcdc_fix;
info->fix.smem_len = max_size * (cfg->bpp / 8) * 2;
- if (!mode)
+ if (!mode) {
mode = &default_720p;
+ num_cfg = 1;
+ } else {
+ num_cfg = cfg->num_cfg;
+ }
+
+ fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
fb_videomode_to_var(var, mode);
+ var->width = cfg->lcd_size_cfg.width;
+ var->height = cfg->lcd_size_cfg.height;
/* Default Y virtual resolution is 2x panel size */
var->yres_virtual = var->yres * 2;
var->activate = FB_ACTIVATE_NOW;
for (i = 0; i < j; i++) {
struct sh_mobile_lcdc_chan *ch = priv->ch + i;
- const struct fb_videomode *mode = ch->cfg.lcd_cfg;
-
- if (!mode)
- mode = &default_720p;
info = ch->info;
}
}
- fb_videomode_to_modelist(mode, ch->cfg.num_cfg, &info->modelist);
error = register_framebuffer(info);
if (error < 0)
goto err1;
#include "init.h"
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
#include "300vtbl.h"
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
#include "310vtbl.h"
#endif
/* POINTER INITIALIZATION */
/*********************************************/
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
static void
InitCommonPointer(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static void
InitTo300Pointer(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void
InitTo310Pointer(struct SiS_Private *SiS_Pr)
{
SiSInitPtr(struct SiS_Private *SiS_Pr)
{
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
InitTo300Pointer(SiS_Pr);
#else
return false;
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
InitTo310Pointer(SiS_Pr);
#else
return false;
/* HELPER: Get ModeID */
/*********************************************/
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
int Depth, bool FSTN, int LCDwidth, int LCDheight)
void
SiS_SetReg(SISIOADDRESS port, unsigned short index, unsigned short data)
{
- OutPortByte(port, index);
- OutPortByte(port + 1, data);
+ outb((u8)index, port);
+ outb((u8)data, port + 1);
}
void
SiS_SetRegByte(SISIOADDRESS port, unsigned short data)
{
- OutPortByte(port, data);
+ outb((u8)data, port);
}
void
SiS_SetRegShort(SISIOADDRESS port, unsigned short data)
{
- OutPortWord(port, data);
+ outw((u16)data, port);
}
void
SiS_SetRegLong(SISIOADDRESS port, unsigned int data)
{
- OutPortLong(port, data);
+ outl((u32)data, port);
}
unsigned char
SiS_GetReg(SISIOADDRESS port, unsigned short index)
{
- OutPortByte(port, index);
- return(InPortByte(port + 1));
+ outb((u8)index, port);
+ return inb(port + 1);
}
unsigned char
SiS_GetRegByte(SISIOADDRESS port)
{
- return(InPortByte(port));
+ return inb(port);
}
unsigned short
SiS_GetRegShort(SISIOADDRESS port)
{
- return(InPortWord(port));
+ return inw(port);
}
unsigned int
SiS_GetRegLong(SISIOADDRESS port)
{
- return(InPortLong(port));
+ return inl(port);
}
void
SiSInitPCIetc(struct SiS_Private *SiS_Pr)
{
switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
case SIS_300:
case SIS_540:
case SIS_630:
SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x5A);
break;
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
case SIS_315H:
case SIS_315:
case SIS_315PRO:
/* HELPER: SetLVDSetc */
/*********************************************/
-#ifdef SIS_LINUX_KERNEL
static
-#endif
void
SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
{
if((temp == 1) || (temp == 2)) return;
switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
case SIS_540:
case SIS_630:
case SIS_730:
}
break;
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
case SIS_550:
case SIS_650:
case SIS_740:
/* HELPER: GetVBType */
/*********************************************/
-#ifdef SIS_LINUX_KERNEL
static
-#endif
void
SiS_GetVBType(struct SiS_Private *SiS_Pr)
{
/* HELPER: Check RAM size */
/*********************************************/
-#ifdef SIS_LINUX_KERNEL
static bool
SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
unsigned short ModeIdIndex)
if(AdapterMemSize < memorysize) return false;
return true;
}
-#endif
/*********************************************/
/* HELPER: Get DRAM type */
/*********************************************/
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static unsigned char
SiS_Get310DRAMType(struct SiS_Private *SiS_Pr)
{
/* HELPER: ClearBuffer */
/*********************************************/
-#ifdef SIS_LINUX_KERNEL
static void
SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
{
if(SiS_Pr->SiS_ModeType >= ModeEGA) {
if(ModeNo > 0x13) {
- SiS_SetMemory(memaddr, memsize, 0);
+ memset_io(memaddr, 0, memsize);
} else {
pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
for(i = 0; i < 0x4000; i++) writew(0x0000, &pBuffer[i]);
pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
for(i = 0; i < 0x4000; i++) writew(0x0720, &pBuffer[i]);
} else {
- SiS_SetMemory(memaddr, 0x8000, 0);
+ memset_io(memaddr, 0, 0x8000);
}
}
-#endif
/*********************************************/
/* HELPER: SearchModeID */
SiS_SetReg(SiS_Pr->SiS_P3d4,0x14,0x4F);
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType == XGI_20) {
SiS_SetReg(SiS_Pr->SiS_P3d4,0x04,crt1data[4] - 1);
if(!(temp = crt1data[5] & 0x1f)) {
SiS_SetReg(SiS_Pr->SiS_P3c4,0x2c,clkb);
if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_SetReg(SiS_Pr->SiS_P3c4,0x2D,0x01);
if(SiS_Pr->ChipType == XGI_20) {
unsigned short mf = SiS_GetModeFlag(SiS_Pr, ModeNo, ModeIdIndex);
/* FIFO */
/*********************************************/
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
void
SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
unsigned short *idx2)
SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x09,0x80,data);
/* Write foreground and background queue */
-#ifdef SIS_LINUX_KERNEL
templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
-#else
- templ = pciReadLong(0x00000000, 0x50);
-#endif
if(SiS_Pr->ChipType == SIS_730) {
}
-#ifdef SIS_LINUX_KERNEL
sisfb_write_nbridge_pci_dword(SiS_Pr, 0x50, templ);
templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xA0);
-#else
- pciWriteLong(0x00000000, 0x50, templ);
- templ = pciReadLong(0x00000000, 0xA0);
-#endif
/* GUI grant timer (PCI config 0xA3) */
if(SiS_Pr->ChipType == SIS_730) {
}
-#ifdef SIS_LINUX_KERNEL
sisfb_write_nbridge_pci_dword(SiS_Pr, 0xA0, templ);
-#else
- pciWriteLong(0x00000000, 0xA0, templ);
-#endif
}
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void
SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex)
{
}
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(VCLK > 150) data |= 0x80;
SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x07,0x7B,data);
SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xF7,data);
#endif
} else if(SiS_Pr->ChipType < XGI_20) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(VCLK >= 166) data |= 0x0c;
SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
}
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(VCLK >= 200) data |= 0x0c;
if(SiS_Pr->ChipType == XGI_20) data &= ~0x04;
SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
unsigned short ModeIdIndex, unsigned short RRTI)
{
unsigned short data, infoflag = 0, modeflag, resindex;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
unsigned short data2, data3;
#endif
SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0F,0xB7,data);
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x31,0xfb);
}
SiS_SetVCLKState(SiS_Pr, ModeNo, RRTI, ModeIdIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->ChipType < SIS_661)) ||
(SiS_Pr->ChipType == XGI_40)) {
if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & 0x40) {
#endif
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void
SiS_SetupDualChip(struct SiS_Private *SiS_Pr)
{
SiS_Pr->SiS_SelectCRT2Rate = 0;
SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2);
-#ifdef SIS_XORG_XF86
- xf86DrvMsgVerb(0, X_PROBED, 4, "(init: VBType=0x%04x, VBInfo=0x%04x)\n",
- SiS_Pr->SiS_VBType, SiS_Pr->SiS_VBInfo);
-#endif
-
if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) {
if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) {
SiS_Pr->SiS_SetFlag |= ProgrammingCRT2;
}
switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
case SIS_300:
SiS_SetCRT1FIFO_300(SiS_Pr, ModeNo, RefreshRateTableIndex);
break;
break;
#endif
default:
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType == XGI_20) {
unsigned char sr2b = 0, sr2c = 0;
switch(ModeNo) {
SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType == XGI_40) {
SiS_SetupDualChip(SiS_Pr);
}
SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex);
-#ifdef SIS_LINUX_KERNEL
if(SiS_Pr->SiS_flag_clearbuffer) {
SiS_ClearBuffer(SiS_Pr, ModeNo);
}
-#endif
if(!(SiS_Pr->SiS_VBInfo & (SetSimuScanMode | SwitchCRT2 | SetCRT2ToLCDA))) {
SiS_WaitRetrace1(SiS_Pr);
static void
SiS_ResetVB(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
unsigned short temp;
* which locks CRT2 in some way to CRT1 timing. Disable
* this here.
*/
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if((IS_SIS651) || (IS_SISM650) ||
SiS_Pr->ChipType == SIS_340 ||
SiS_Pr->ChipType == XGI_40) {
static void
SiS_Handle760(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned int somebase;
unsigned char temp1, temp2, temp3;
(!(SiS_Pr->SiS_SysFlags & SF_760UMA)) )
return;
-#ifdef SIS_LINUX_KERNEL
somebase = sisfb_read_mio_pci_word(SiS_Pr, 0x74);
-#else
- somebase = pciReadWord(0x00001000, 0x74);
-#endif
somebase &= 0xffff;
if(somebase == 0) return;
temp2 = 0x0b;
}
-#ifdef SIS_LINUX_KERNEL
sisfb_write_nbridge_pci_byte(SiS_Pr, 0x7e, temp1);
sisfb_write_nbridge_pci_byte(SiS_Pr, 0x8d, temp2);
-#else
- pciWriteByte(0x00000000, 0x7e, temp1);
- pciWriteByte(0x00000000, 0x8d, temp2);
-#endif
SiS_SetRegByte((somebase + 0x85), temp3);
#endif
}
-/*********************************************/
-/* X.org/XFree86: SET SCREEN PITCH */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-static void
-SiS_SetPitchCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short HDisplay = pSiS->scrnPitch >> 3;
-
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x13,(HDisplay & 0xFF));
- SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitchCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short HDisplay = pSiS->scrnPitch2 >> 3;
-
- /* Unlock CRT2 */
- if(pSiS->VGAEngine == SIS_315_VGA)
- SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2F, 0x01);
- else
- SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24, 0x01);
-
- SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(HDisplay & 0xFF));
- SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitch(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
- SISPtr pSiS = SISPTR(pScrn);
- bool isslavemode = false;
-
- if( (pSiS->VBFlags2 & VB2_VIDEOBRIDGE) &&
- ( ((pSiS->VGAEngine == SIS_300_VGA) &&
- (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0xa0) == 0x20) ||
- ((pSiS->VGAEngine == SIS_315_VGA) &&
- (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x50) == 0x10) ) ) {
- isslavemode = true;
- }
-
- /* We need to set pitch for CRT1 if bridge is in slave mode, too */
- if((pSiS->VBFlags & DISPTYPE_DISP1) || (isslavemode)) {
- SiS_SetPitchCRT1(SiS_Pr, pScrn);
- }
- /* We must not set the pitch for CRT2 if bridge is in slave mode */
- if((pSiS->VBFlags & DISPTYPE_DISP2) && (!isslavemode)) {
- SiS_SetPitchCRT2(SiS_Pr, pScrn);
- }
-}
-#endif
-
/*********************************************/
/* SiSSetMode() */
/*********************************************/
-#ifdef SIS_XORG_XF86
-/* We need pScrn for setting the pitch correctly */
-bool
-SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, bool dosetpitch)
-#else
bool
SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
-#endif
{
SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
unsigned short RealModeNo, ModeIdIndex;
unsigned char backupreg = 0;
-#ifdef SIS_LINUX_KERNEL
unsigned short KeepLockReg;
SiS_Pr->UseCustomMode = false;
SiS_Pr->CRT1UsesCustomMode = false;
-#endif
SiS_Pr->SiS_flag_clearbuffer = 0;
if(SiS_Pr->UseCustomMode) {
ModeNo = 0xfe;
} else {
-#ifdef SIS_LINUX_KERNEL
if(!(ModeNo & 0x80)) SiS_Pr->SiS_flag_clearbuffer = 1;
-#endif
ModeNo &= 0x7f;
}
SiS_GetSysFlags(SiS_Pr);
SiS_Pr->SiS_VGAINFO = 0x11;
-#if defined(SIS_XORG_XF86) && (defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__))
- if(pScrn) SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#endif
-#ifdef SIS_LINUX_KERNEL
KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
-#endif
SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
SiSInitPCIetc(SiS_Pr);
SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
SiS_SetLowModeTest(SiS_Pr, ModeNo);
-#ifdef SIS_LINUX_KERNEL
/* Check memory size (kernel framebuffer driver only) */
if(!SiS_CheckMemorySize(SiS_Pr, ModeNo, ModeIdIndex)) {
return false;
}
-#endif
SiS_OpenCRTC(SiS_Pr);
SiS_DisplayOn(SiS_Pr);
SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
if(!(SiS_IsDualEdge(SiS_Pr))) {
if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(!SiS_Pr->SiS_ROMNew) {
if(SiS_IsVAMode(SiS_Pr)) {
SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
}
}
-#ifdef SIS_XORG_XF86
- if(pScrn) {
- /* SetPitch: Adapt to virtual size & position */
- if((ModeNo > 0x13) && (dosetpitch)) {
- SiS_SetPitch(SiS_Pr, pScrn);
- }
-
- /* Backup/Set ModeNo in BIOS scratch area */
- SiS_GetSetModeID(pScrn, ModeNo);
- }
-#endif
-
SiS_CloseCRTC(SiS_Pr);
SiS_Handle760(SiS_Pr);
-#ifdef SIS_LINUX_KERNEL
/* We never lock registers in XF86 */
if(KeepLockReg != 0xA1) SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x00);
-#endif
return true;
}
-/*********************************************/
-/* X.org/XFree86: SiSBIOSSetMode() */
-/* for non-Dual-Head mode */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-bool
-SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom)
-{
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short ModeNo = 0;
-
- SiS_Pr->UseCustomMode = false;
-
- if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting custom mode %dx%d\n",
- SiS_Pr->CHDisplay,
- (mode->Flags & V_INTERLACE ? SiS_Pr->CVDisplay * 2 :
- (mode->Flags & V_DBLSCAN ? SiS_Pr->CVDisplay / 2 :
- SiS_Pr->CVDisplay)));
-
- } else {
-
- /* Don't need vbflags here; checks done earlier */
- ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
- if(!ModeNo) return false;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting standard mode 0x%x\n", ModeNo);
-
- }
-
- return(SiSSetMode(SiS_Pr, pScrn, ModeNo, true));
-}
-
-/*********************************************/
-/* X.org/XFree86: SiSBIOSSetModeCRT2() */
-/* for Dual-Head modes */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom)
-{
- SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
- SISPtr pSiS = SISPTR(pScrn);
-#ifdef SISDUALHEAD
- SISEntPtr pSiSEnt = pSiS->entityPrivate;
-#endif
- unsigned short ModeIdIndex;
- unsigned short ModeNo = 0;
- unsigned char backupreg = 0;
-
- SiS_Pr->UseCustomMode = false;
-
- /* Remember: Custom modes for CRT2 are ONLY supported
- * -) on the 30x/B/C, and
- * -) if CRT2 is LCD or VGA, or CRT1 is LCDA
- */
-
- if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
- ModeNo = 0xfe;
-
- } else {
-
- ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
- if(!ModeNo) return false;
-
- }
-
- SiSRegInit(SiS_Pr, BaseAddr);
- SiSInitPtr(SiS_Pr);
- SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
- SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
- SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
- SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
- SiSInitPCIetc(SiS_Pr);
- SiSSetLVDSetc(SiS_Pr);
- SiSDetermineROMUsage(SiS_Pr);
-
- /* Save mode info so we can set it from within SetMode for CRT1 */
-#ifdef SISDUALHEAD
- if(pSiS->DualHeadMode) {
- pSiSEnt->CRT2ModeNo = ModeNo;
- pSiSEnt->CRT2DMode = mode;
- pSiSEnt->CRT2IsCustom = IsCustom;
- pSiSEnt->CRT2CR30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
- pSiSEnt->CRT2CR31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
- pSiSEnt->CRT2CR35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- pSiSEnt->CRT2CR38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-#if 0
- /* We can't set CRT2 mode before CRT1 mode is set - says who...? */
- if(pSiSEnt->CRT1ModeNo == -1) {
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting CRT2 mode delayed until after setting CRT1 mode\n");
- return true;
- }
-#endif
- pSiSEnt->CRT2ModeSet = true;
- }
-#endif
-
- if(SiS_Pr->UseCustomMode) {
-
- unsigned short temptemp = SiS_Pr->CVDisplay;
-
- if(SiS_Pr->CModeFlag & DoubleScanMode) temptemp >>= 1;
- else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting custom mode %dx%d on CRT2\n",
- SiS_Pr->CHDisplay, temptemp);
-
- } else {
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting standard mode 0x%x on CRT2\n", ModeNo);
-
- }
-
- SiS_UnLockCRT2(SiS_Pr);
-
- if(!SiS_Pr->UseCustomMode) {
- if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
- } else {
- ModeIdIndex = 0;
- }
-
- SiS_GetVBType(SiS_Pr);
-
- SiS_InitVB(SiS_Pr);
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- SiS_ResetVB(SiS_Pr);
- SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x32,0x10);
- SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x00,0x0c);
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
- } else {
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- }
- }
-
- /* Get VB information (connectors, connected devices) */
- if(!SiS_Pr->UseCustomMode) {
- SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 1);
- } else {
- /* If this is a custom mode, we don't check the modeflag for CRT2Mode */
- SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
- }
- SiS_SetYPbPr(SiS_Pr);
- SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
- SiS_ResetSegmentRegisters(SiS_Pr);
-
- /* Set mode on CRT2 */
- if( (SiS_Pr->SiS_VBType & VB_SISVB) ||
- (SiS_Pr->SiS_IF_DEF_LVDS == 1) ||
- (SiS_Pr->SiS_IF_DEF_CH70xx != 0) ||
- (SiS_Pr->SiS_IF_DEF_TRUMPION != 0) ) {
- SiS_SetCRT2Group(SiS_Pr, ModeNo);
- }
-
- SiS_StrangeStuff(SiS_Pr);
-
- SiS_DisplayOn(SiS_Pr);
- SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
- if(SiS_Pr->ChipType >= SIS_315H) {
- if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
- if(!(SiS_IsDualEdge(SiS_Pr))) {
- SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb);
- }
- }
- }
-
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- if(!SiS_Pr->SiS_ROMNew) {
- if(SiS_IsVAMode(SiS_Pr)) {
- SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
- } else {
- SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x35,0xFE);
- }
- }
-
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-
- if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x30) & SetCRT2ToLCD) {
- SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc);
- }
- } else if((SiS_Pr->ChipType == SIS_630) ||
- (SiS_Pr->ChipType == SIS_730)) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
- }
- }
-
- /* SetPitch: Adapt to virtual size & position */
- SiS_SetPitchCRT2(SiS_Pr, pScrn);
-
- SiS_Handle760(SiS_Pr);
-
- return true;
-}
-
-/*********************************************/
-/* X.org/XFree86: SiSBIOSSetModeCRT1() */
-/* for Dual-Head modes */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom)
-{
- SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short ModeIdIndex, ModeNo = 0;
- unsigned char backupreg = 0;
-#ifdef SISDUALHEAD
- SISEntPtr pSiSEnt = pSiS->entityPrivate;
- unsigned char backupcr30, backupcr31, backupcr38, backupcr35, backupp40d=0;
- bool backupcustom;
-#endif
-
- SiS_Pr->UseCustomMode = false;
-
- if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
- unsigned short temptemp = SiS_Pr->CVDisplay;
-
- if(SiS_Pr->CModeFlag & DoubleScanMode) temptemp >>= 1;
- else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting custom mode %dx%d on CRT1\n",
- SiS_Pr->CHDisplay, temptemp);
- ModeNo = 0xfe;
-
- } else {
-
- ModeNo = SiS_GetModeNumber(pScrn, mode, 0); /* don't give VBFlags */
- if(!ModeNo) return false;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting standard mode 0x%x on CRT1\n", ModeNo);
- }
-
- SiSInitPtr(SiS_Pr);
- SiSRegInit(SiS_Pr, BaseAddr);
- SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
- SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
- SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
- SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
- SiSInitPCIetc(SiS_Pr);
- SiSSetLVDSetc(SiS_Pr);
- SiSDetermineROMUsage(SiS_Pr);
-
- SiS_UnLockCRT2(SiS_Pr);
-
- if(!SiS_Pr->UseCustomMode) {
- if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
- } else {
- ModeIdIndex = 0;
- }
-
- /* Determine VBType */
- SiS_GetVBType(SiS_Pr);
-
- SiS_InitVB(SiS_Pr);
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
- } else {
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- }
- }
-
- /* Get VB information (connectors, connected devices) */
- /* (We don't care if the current mode is a CRT2 mode) */
- SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
- SiS_SetYPbPr(SiS_Pr);
- SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
- SiS_OpenCRTC(SiS_Pr);
-
- /* Set mode on CRT1 */
- SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
- if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
- SiS_SetCRT2Group(SiS_Pr, ModeNo);
- }
-
- /* SetPitch: Adapt to virtual size & position */
- SiS_SetPitchCRT1(SiS_Pr, pScrn);
-
- SiS_HandleCRT1(SiS_Pr);
-
- SiS_StrangeStuff(SiS_Pr);
-
- SiS_CloseCRTC(SiS_Pr);
-
-#ifdef SISDUALHEAD
- if(pSiS->DualHeadMode) {
- pSiSEnt->CRT1ModeNo = ModeNo;
- pSiSEnt->CRT1DMode = mode;
- }
-#endif
-
- if(SiS_Pr->UseCustomMode) {
- SiS_Pr->CRT1UsesCustomMode = true;
- SiS_Pr->CSRClock_CRT1 = SiS_Pr->CSRClock;
- SiS_Pr->CModeFlag_CRT1 = SiS_Pr->CModeFlag;
- } else {
- SiS_Pr->CRT1UsesCustomMode = false;
- }
-
- /* Reset CRT2 if changing mode on CRT1 */
-#ifdef SISDUALHEAD
- if(pSiS->DualHeadMode) {
- if(pSiSEnt->CRT2ModeNo != -1) {
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "(Re-)Setting mode for CRT2\n");
- backupcustom = SiS_Pr->UseCustomMode;
- backupcr30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
- backupcr31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
- backupcr35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- backupcr38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
- if(SiS_Pr->SiS_VBType & VB_SISVB) {
- /* Backup LUT-enable */
- if(pSiSEnt->CRT2ModeSet) {
- backupp40d = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x0d) & 0x08;
- }
- }
- if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,pSiSEnt->CRT2CR30);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,pSiSEnt->CRT2CR31);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,pSiSEnt->CRT2CR35);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,pSiSEnt->CRT2CR38);
- }
-
- SiSBIOSSetModeCRT2(SiS_Pr, pSiSEnt->pScrn_1,
- pSiSEnt->CRT2DMode, pSiSEnt->CRT2IsCustom);
-
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,backupcr30);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,backupcr31);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupcr35);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupcr38);
- if(SiS_Pr->SiS_VBType & VB_SISVB) {
- SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d, ~0x08, backupp40d);
- }
- SiS_Pr->UseCustomMode = backupcustom;
- }
- }
-#endif
-
- /* Warning: From here, the custom mode entries in SiS_Pr are
- * possibly overwritten
- */
-
- SiS_DisplayOn(SiS_Pr);
- SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
- } else if((SiS_Pr->ChipType == SIS_630) ||
- (SiS_Pr->ChipType == SIS_730)) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
- }
- }
-
- SiS_Handle760(SiS_Pr);
-
- /* Backup/Set ModeNo in BIOS scratch area */
- SiS_GetSetModeID(pScrn,ModeNo);
-
- return true;
-}
-#endif /* Linux_XF86 */
-
#ifndef GETBITSTR
#define BITMASK(h,l) (((unsigned)(1U << ((h)-(l)+1))-1)<<(l))
#define GENMASK(mask) BITMASK(1?mask,0?mask)
SiS_Pr->CVBlankStart = SiS_Pr->SiS_VGAVDE;
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
tempbx = SiS_Pr->SiS_VGAHT;
if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
tempbx = SiS_Pr->PanelHT;
remaining = tempbx % 8;
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
/* OK for LCDA, LVDS */
tempbx = SiS_Pr->PanelHT - SiS_Pr->PanelXRes;
tempax = SiS_Pr->SiS_VGAHDE; /* not /2 ! */
SiS_Pr->CHTotal = SiS_Pr->CHBlankEnd = tempbx;
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_VGAHDE == SiS_Pr->PanelXRes) {
SiS_Pr->CHSyncStart = SiS_Pr->SiS_VGAHDE + ((SiS_Pr->PanelHRS + 1) & ~1);
SiS_Pr->CHSyncEnd = SiS_Pr->CHSyncStart + SiS_Pr->PanelHRE;
}
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
tempax = VGAHDE;
if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
tempbx = SiS_Pr->PanelXRes;
if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
tempax = SiS_Pr->PanelYRes;
} else if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
/* Stupid hack for 640x400/320x200 */
if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) {
if((tempax + tempbx) == 438) tempbx += 16;
if(modeflag & DoubleScanMode) tempax |= 0x80;
SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,0x5F,tempax);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "%d %d %d %d %d %d %d %d (%d %d %d %d)\n",
- SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
- SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
- SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
- xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
- SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
- SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
- SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
- xf86DrvMsg(0, X_INFO, " 0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
- SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
- SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
- SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
- xf86DrvMsg(0, X_INFO, " 0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
}
void
SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
int xres, int yres,
-#ifdef SIS_XORG_XF86
- DisplayModePtr current
-#endif
-#ifdef SIS_LINUX_KERNEL
struct fb_var_screeninfo *var, bool writeres
-#endif
)
{
unsigned short HRE, HBE, HRS, HBS, HDE, HT;
D = B - F - C;
-#ifdef SIS_XORG_XF86
- current->HDisplay = (E * 8);
- current->HSyncStart = (E * 8) + (F * 8);
- current->HSyncEnd = (E * 8) + (F * 8) + (C * 8);
- current->HTotal = (E * 8) + (F * 8) + (C * 8) + (D * 8);
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO,
- "H: A %d B %d C %d D %d E %d F %d HT %d HDE %d HRS %d HBS %d HBE %d HRE %d\n",
- A, B, C, D, E, F, HT, HDE, HRS, HBS, HBE, HRE);
-#else
- (void)VBS; (void)HBS; (void)A;
-#endif
-#endif
-#ifdef SIS_LINUX_KERNEL
if(writeres) var->xres = xres = E * 8;
var->left_margin = D * 8;
var->right_margin = F * 8;
var->hsync_len = C * 8;
-#endif
/* Vertical */
sr_data = crdata[13];
D = B - F - C;
-#ifdef SIS_XORG_XF86
- current->VDisplay = VDE + 1;
- current->VSyncStart = VRS + 1;
- current->VSyncEnd = ((VRS & ~0x1f) | VRE) + 1;
- if(VRE <= (VRS & 0x1f)) current->VSyncEnd += 32;
- current->VTotal = E + D + C + F;
-#if 0
- current->VDisplay = E;
- current->VSyncStart = E + D;
- current->VSyncEnd = E + D + C;
- current->VTotal = E + D + C + F;
-#endif
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO,
- "V: A %d B %d C %d D %d E %d F %d VT %d VDE %d VRS %d VBS %d VBE %d VRE %d\n",
- A, B, C, D, E, F, VT, VDE, VRS, VBS, VBE, VRE);
-#endif
-#endif
-#ifdef SIS_LINUX_KERNEL
if(writeres) var->yres = yres = E;
var->upper_margin = D;
var->lower_margin = F;
var->vsync_len = C;
-#endif
if((xres == 320) && ((yres == 200) || (yres == 240))) {
/* Terrible hack, but correct CRTC data for
* a negative D. The CRT controller does not
* seem to like correcting HRE to 50)
*/
-#ifdef SIS_XORG_XF86
- current->HDisplay = 320;
- current->HSyncStart = 328;
- current->HSyncEnd = 376;
- current->HTotal = 400;
-#endif
-#ifdef SIS_LINUX_KERNEL
var->left_margin = (400 - 376);
var->right_margin = (328 - 320);
var->hsync_len = (376 - 328);
-#endif
}
#ifndef _INIT_H_
#define _INIT_H_
-#include "osdef.h"
#include "initdef.h"
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#define SIS_NEED_inSISREG
-#define SIS_NEED_inSISREGW
-#define SIS_NEED_inSISREGL
-#define SIS_NEED_outSISREG
-#define SIS_NEED_outSISREGW
-#define SIS_NEED_outSISREGL
-#include "sis_regs.h"
-#endif
-
-#ifdef SIS_LINUX_KERNEL
#include "vgatypes.h"
#include "vstruct.h"
#ifdef SIS_CP
#include <linux/fb.h>
#include "sis.h"
#include <video/sisfb.h>
-#endif
/* Mode numbers */
static const unsigned short ModeIndex_320x200[] = {0x59, 0x41, 0x00, 0x4f};
{ 1280, 854, 8,16} /* 0x22 */
};
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
static const struct SiS_StandTable_S SiS_StandTable[]=
{
/* 0x00: MD_0_200 */
};
bool SiSInitPtr(struct SiS_Private *SiS_Pr);
-#ifdef SIS_XORG_XF86
-unsigned short SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
- int Depth, bool FSTN, int LCDwith, int LCDheight);
-#endif
unsigned short SiS_GetModeID_LCD(int VGAEngine, unsigned int VBFlags, int HDisplay,
int VDisplay, int Depth, bool FSTN,
unsigned short CustomT, int LCDwith, int LCDheight,
void SiS_DisplayOn(struct SiS_Private *SiS_Pr);
void SiS_DisplayOff(struct SiS_Private *SiS_Pr);
void SiSRegInit(struct SiS_Private *SiS_Pr, SISIOADDRESS BaseAddr);
-#ifndef SIS_LINUX_KERNEL
-void SiSSetLVDSetc(struct SiS_Private *SiS_Pr);
-#endif
void SiS_SetEnableDstn(struct SiS_Private *SiS_Pr, int enable);
void SiS_SetEnableFstn(struct SiS_Private *SiS_Pr, int enable);
unsigned short SiS_GetModeFlag(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
unsigned short ModeIdIndex);
bool SiSDetermineROMLayout661(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void SiS_GetVBType(struct SiS_Private *SiS_Pr);
-#endif
bool SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
unsigned short *ModeIdIndex);
unsigned short ModeIdIndex);
unsigned short SiS_GetOffset(struct SiS_Private *SiS_Pr,unsigned short ModeNo,
unsigned short ModeIdIndex, unsigned short RRTI);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
void SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
unsigned short *idx2);
unsigned short SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2);
unsigned short SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
#endif
void SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-bool SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo,
- bool dosetpitch);
-bool SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom);
-bool SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom);
-bool SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom);
-#endif
-#ifdef SIS_LINUX_KERNEL
bool SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
-#endif
void SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
void SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
- int yres, DisplayModePtr current);
-#endif
-#ifdef SIS_LINUX_KERNEL
void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
int yres, struct fb_var_screeninfo *var, bool writeres);
-#endif
/* From init301.c: */
extern void SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
extern bool SiS_IsVAMode(struct SiS_Private *);
extern bool SiS_IsDualEdge(struct SiS_Private *);
-#ifdef SIS_XORG_XF86
-/* From other modules: */
-extern unsigned short SiS_CheckBuildCustomMode(ScrnInfoPtr pScrn, DisplayModePtr mode,
- unsigned int VBFlags);
-extern unsigned char SiS_GetSetBIOSScratch(ScrnInfoPtr pScrn, unsigned short offset,
- unsigned char value);
-extern unsigned char SiS_GetSetModeID(ScrnInfoPtr pScrn, unsigned char id);
-extern unsigned short SiS_GetModeNumber(ScrnInfoPtr pScrn, DisplayModePtr mode,
- unsigned int VBFlags);
-#endif
-
-#ifdef SIS_LINUX_KERNEL
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
extern unsigned int sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
extern void sisfb_write_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg,
unsigned int val);
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
extern void sisfb_write_nbridge_pci_byte(struct SiS_Private *SiS_Pr, int reg,
unsigned char val);
extern unsigned int sisfb_read_mio_pci_word(struct SiS_Private *SiS_Pr, int reg);
#endif
-#endif
#endif
#include "init301.h"
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
#include "oem300.h"
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
#include "oem310.h"
#endif
#define SiS_I2CDELAYSHORT 150
static unsigned short SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr);
-#ifdef SIS_LINUX_KERNEL
static void SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-#endif
/*********************************************/
/* HELPER: Lock/Unlock CRT2 */
SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24,0x01);
}
-#ifdef SIS_LINUX_KERNEL
static
-#endif
void
SiS_LockCRT2(struct SiS_Private *SiS_Pr)
{
/* HELPER: Get Pointer to LCD structure */
/*********************************************/
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static unsigned char *
GetLCDStructPtr661(struct SiS_Private *SiS_Pr)
{
/* HELPER: GET SOME DATA FROM BIOS ROM */
/*********************************************/
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static bool
SiS_CR36BIOSWord23b(struct SiS_Private *SiS_Pr)
{
SiS_GetReg(SiS_Pr->SiS_P3c4, 0x05);
}
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
static void
SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void
SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
{
}
#endif
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
static void
SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
{
static void
SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
{
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
unsigned short PanelID, DelayIndex, Delay=0;
#endif
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36);
if(SiS_Pr->SiS_VBType & VB_SISVB) {
}
SiS_ShortDelay(SiS_Pr, Delay);
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if((SiS_Pr->ChipType >= SIS_661) ||
(SiS_Pr->ChipType <= SIS_315PRO) ||
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void
SiS_PanelDelayLoop(struct SiS_Private *SiS_Pr, unsigned short DelayTime, unsigned short DelayLoop)
{
while((!(SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08)) && --watchdog);
}
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
static void
SiS_WaitRetrace2(struct SiS_Private *SiS_Pr, unsigned short reg)
{
SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr)
{
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x20)) return;
}
}
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x40)) {
SiS_WaitRetrace1(SiS_Pr);
} else {
/* HELPER: MISC */
/*********************************************/
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static bool
SiS_Is301B(struct SiS_Private *SiS_Pr)
{
bool
SiS_IsDualEdge(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if((SiS_Pr->ChipType != SIS_650) || (SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xf0)) {
if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x38) & EnableDualEdge) return true;
bool
SiS_IsVAMode(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short flag;
if(SiS_Pr->ChipType >= SIS_315H) {
return false;
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_IsVAorLCD(struct SiS_Private *SiS_Pr)
{
static bool
SiS_IsDualLink(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if((SiS_CRT2IsLCD(SiS_Pr)) ||
(SiS_IsVAMode(SiS_Pr))) {
return false;
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_TVEnabled(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_LCDAEnabled(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_IsYPbPr(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_IsChScart(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr)
{
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static bool
SiS_IsLCDOrLCDA(struct SiS_Private *SiS_Pr)
{
/*********************************************/
/* Setup general purpose IO for Chrontel communication */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
void
SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo)
{
if(!(SiS_Pr->SiS_ChSW)) return;
-#ifdef SIS_LINUX_KERNEL
acpibase = sisfb_read_lpc_pci_dword(SiS_Pr, 0x74);
-#else
- acpibase = pciReadLong(0x00000800, 0x74);
-#endif
acpibase &= 0xFFFF;
if(!acpibase) return;
temp = SiS_GetRegShort((acpibase + 0x3c)); /* ACPI register 0x3c: GP Event 1 I/O mode select */
tempax &= (DriverMode | LoadDACFlag | SetNotSimuMode | SetPALTV);
tempbx |= tempax;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if(SiS_Pr->SiS_VBType & VB_SISLCDA) {
if(ModeNo == 0x03) {
}
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
if(!(SiS_Pr->SiS_VBType & VB_SISVGA2)) {
tempbx &= ~(SetCRT2ToRAMDAC);
SiS_Pr->SiS_VBInfo = tempbx;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->ChipType == SIS_630) {
SiS_SetChrontelGPIO(SiS_Pr, SiS_Pr->SiS_VBInfo);
}
#endif
-#ifdef SIS_LINUX_KERNEL
#if 0
printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n",
SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
#endif
-#endif
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_PROBED, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n",
- SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
-#endif
-#endif
}
/*********************************************/
}
SiS_Pr->SiS_VBInfo &= ~SetPALTV;
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo);
-#endif
-#endif
}
/*********************************************/
static void
SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned char *ROMAddr;
unsigned short temp;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
- SiS_Pr->PanelHT, SiS_Pr->PanelVT,
- SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
- SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
if((ROMAddr = GetLCDStructPtr661(SiS_Pr))) {
if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) {
SiS_Pr->SiS_NeedRomModeData = true;
SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C =
SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20];
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Paneldata BIOS: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
- SiS_Pr->PanelHT, SiS_Pr->PanelVT,
- SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
- SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
}
#endif
}
{
unsigned short temp,modeflag,resinfo=0,modexres=0,modeyres=0;
bool panelcanscale = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
static const unsigned char SiS300SeriesLCDRes[] =
{ 0, 1, 2, 3, 7, 4, 5, 8,
0, 0, 10, 0, 0, 0, 0, 15 };
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned char *myptr = NULL;
#endif
SiS_Pr->SiS_LCDTypeInfo = (temp & 0x0F) - 1;
}
temp &= 0x0f;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->ChipType < SIS_315H) {
/* Very old BIOSes only know 7 sizes (NetVista 2179, 1.01g) */
if(SiS_Pr->SiS_VBType & VB_SIS301) {
#endif
/* Translate to our internal types */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType == SIS_550) {
if (temp == Panel310_1152x768) temp = Panel_320x240_2; /* Verified working */
else if(temp == Panel310_320x240_2) temp = Panel_320x240_2;
SiS_Pr->SiS_LCDResInfo = temp;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
SiS_Pr->SiS_LCDResInfo = Panel_Barco1366;
else if(SiS_Pr->UsePanelScaler == 1) SiS_Pr->SiS_LCDInfo |= DontExpandLCD;
/* Dual link, Pass 1:1 BIOS default, etc. */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_661) {
if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
if(temp & 0x08) SiS_Pr->SiS_LCDInfo |= LCDPass11;
}
}
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
if(SiS_Pr->SiS_CustomT == CUT_PANEL848 || SiS_Pr->SiS_CustomT == CUT_PANEL856) {
SiS_Pr->SiS_LCDInfo = 0x80 | 0x40 | 0x20; /* neg h/v sync, RGB24(D0 = 0) */
SiS_Pr->SiS_SetFlag |= LCDVESATiming;
}
-#ifdef SIS_LINUX_KERNEL
#if 0
printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n",
SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo);
#endif
-#endif
-#ifdef SIS_XORG_XF86
- xf86DrvMsgVerb(0, X_PROBED, 4,
- "(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n",
- SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag);
-#endif
}
/*********************************************/
VCLKIndex = SiS_Pr->PanelVCLKIdx315;
}
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
/* Special Timing: Barco iQ Pro R series */
if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) VCLKIndex = 0x44;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex);
-#endif
-#endif
-
return VCLKIndex;
}
{
unsigned short i, j, modeflag, tempah=0;
short tempcl;
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
unsigned short tempbl;
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
unsigned short tempah2, tempbl2;
#endif
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* ---- 300 series ---- */
+#ifdef CONFIG_FB_SIS_300 /* ---- 300 series ---- */
/* For 301BDH: (with LCD via LVDS) */
if(SiS_Pr->SiS_VBType & VB_NoLCD) {
if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0xA0;
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* ------- 315/330 series ------ */
+#ifdef CONFIG_FB_SIS_315 /* ------- 315/330 series ------ */
if(ModeNo > 0x13) {
tempcl -= ModeVGA;
if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0x50;
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
if(SiS_Pr->ChipType < SIS_315H) {
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah);
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah);
} else if(SiS_Pr->SiS_VBType & VB_SISVB) {
if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
/* LVDS can only be slave in 8bpp modes */
tempah = 0x80;
if((modeflag & CRT2Mode) && (SiS_Pr->SiS_ModeType > ModeVGA)) {
} else {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
tempah = 0;
if( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) && (SiS_Pr->SiS_ModeType > ModeVGA) ) {
tempah |= 0x02;
if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
/* unsigned char bridgerev = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01); */
/* The following is nearly unpreditable and varies from machine
SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,tempbl,tempah);
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
} else if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f);
if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) ||
} else { /* LVDS */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
}
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) {
if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) {
if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) {
case Panel_1280x1024: tempbx = 24; break;
case Panel_1400x1050: tempbx = 26; break;
case Panel_1600x1200: tempbx = 28; break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
case Panel_Barco1366: tempbx = 80; break;
#endif
}
if(SiS_Pr->SiS_LCDInfo & LCDPass11) tempbx = 30;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) {
tempbx = 82;
if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++;
if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_CalcPanelLinkTiming(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
SiS_CalcLCDACRT1Timing(SiS_Pr, ModeNo, ModeIdIndex);
#endif
case 16: LVDSData = SiS_Pr->SiS_LVDS800x600Data_1; break;
case 18: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_1; break;
case 20: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1; break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
case 80: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_1; break;
case 81: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_2; break;
case 82: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_1; break;
(SiS_Pr->SiS_SetFlag & SetDOSMode) ) {
SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes;
SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
if(ResIndex < 0x08) {
SiS_Pr->SiS_HDE = 1280;
unsigned short resinfo, CRT2Index, ResIndex;
const struct SiS_LCDData *LCDPtr = NULL;
const struct SiS_TVData *TVPtr = NULL;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
short resinfo661;
#endif
} else {
modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
resinfo661 = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].ROMMODEIDX661;
if( (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) &&
(SiS_Pr->SiS_SetFlag & LCDVESATiming) &&
} else if( (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) && (romptr) && (ROMAddr) ) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_Pr->SiS_RVBHCMAX = ROMAddr[romptr];
SiS_Pr->SiS_RVBHCFACT = ROMAddr[romptr+1];
SiS_Pr->SiS_VGAHT = ROMAddr[romptr+2] | ((ROMAddr[romptr+3] & 0x0f) << 8);
case Panel_1680x1050 :
case Panel_1680x1050 + 32: LCDPtr = SiS_Pr->SiS_LCD1680x1050Data; break;
case 100 : LCDPtr = SiS_Pr->SiS_NoScaleData; break;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
case 200 : LCDPtr = SiS310_ExtCompaq1280x1024Data; break;
case 201 : LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data; break;
#endif
default : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data; break;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex);
-#endif
-#endif
-
SiS_Pr->SiS_RVBHCMAX = (LCDPtr+ResIndex)->RVBHCMAX;
SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT;
SiS_Pr->SiS_VGAHT = (LCDPtr+ResIndex)->VGAHT;
{
const struct SiS_LVDSDes *PanelDesPtr = NULL;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) {
if(SiS_Pr->ChipType < SIS_315H) {
if((SiS_Pr->SiS_VBType & VB_SIS30xBLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
/* non-pass 1:1 only, see above */
if(SiS_Pr->SiS_VGAHDE != SiS_Pr->PanelXRes) {
} else {
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
switch(SiS_Pr->SiS_LCDResInfo) {
case Panel_800x600:
if(SiS_Pr->SiS_VGAVDE == SiS_Pr->PanelYRes) {
}
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
switch(SiS_Pr->SiS_LCDResInfo) {
case Panel_1024x768:
case Panel_1280x1024:
if(SiS_Pr->ChipType < SIS_315H) {
if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 320;
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) SiS_Pr->SiS_LCDHDES = 480;
if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 804;
if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 704;
/* DISABLE VIDEO BRIDGE */
/*********************************************/
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static int
SiS_HandlePWD(struct SiS_Private *SiS_Pr)
{
ret = 1;
}
SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x27,0x7f,temp);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, 0, "Setting PWD %x\n", temp);
-#endif
-#endif
}
#endif
return ret;
void
SiS_DisableBridge(struct SiS_Private *SiS_Pr)
{
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short tempah, pushax=0, modenum;
#endif
unsigned short temp=0;
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* 300 series */
+#ifdef CONFIG_FB_SIS_300 /* 300 series */
if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
}
}
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* 315 series */
+#ifdef CONFIG_FB_SIS_315 /* 315 series */
int didpwd = 0;
bool custom1 = (SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) ||
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
} else { /* ============ For 301 ================ */
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
SiS_SetRegSR11ANDOR(SiS_Pr,0xF7,0x08);
SiS_PanelDelay(SiS_Pr, 3);
SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20);
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp);
} else {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); /* disable CRT2 */
if( (!(SiS_CRT2IsLCD(SiS_Pr))) ||
(!(SiS_CR36BIOSWord23d(SiS_Pr))) ) {
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* 300 series */
+#ifdef CONFIG_FB_SIS_300 /* 300 series */
if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
SiS_SetCH700x(SiS_Pr,0x0E,0x09);
SiS_SetRegSR11ANDOR(SiS_Pr,0xFB,0x04);
}
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* 315 series */
+#ifdef CONFIG_FB_SIS_315 /* 315 series */
if(!(SiS_IsNotM650orLater(SiS_Pr))) {
/*if(SiS_Pr->ChipType < SIS_340) { */ /* XGI needs this */
}
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
} /* 315 series */
* from outside the context of a mode switch!
* MUST call getVBType before calling this
*/
-#ifdef SIS_LINUX_KERNEL
static
-#endif
void
SiS_EnableBridge(struct SiS_Private *SiS_Pr)
{
unsigned short temp=0, tempah;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short temp1, pushax=0;
bool delaylong = false;
#endif
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* 300 series */
+#ifdef CONFIG_FB_SIS_300 /* 300 series */
if(SiS_CRT2IsLCD(SiS_Pr)) {
if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
}
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* 315 series */
+#ifdef CONFIG_FB_SIS_315 /* 315 series */
#ifdef SET_EMI
unsigned char r30=0, r31=0, r32=0, r33=0, cr36=0;
SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f);
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* 300 series */
+#ifdef CONFIG_FB_SIS_300 /* 300 series */
if(SiS_CRT2IsLCD(SiS_Pr)) {
if(SiS_Pr->ChipType == SIS_730) {
}
}
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* 315 series */
+#ifdef CONFIG_FB_SIS_315 /* 315 series */
if(!(SiS_IsNotM650orLater(SiS_Pr))) {
/*if(SiS_Pr->ChipType < SIS_340) {*/ /* XGI needs this */
}
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
} /* 310 series */
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* ---- 300 series --- */
+#ifdef CONFIG_FB_SIS_300 /* ---- 300 series --- */
if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { /* 630 - 301B(-DH) */
}
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* ------- 315 series ------ */
+#ifdef CONFIG_FB_SIS_315 /* ------- 315 series ------ */
if(SiS_Pr->SiS_VBType & VB_SISLVDS) { /* 315 - LVDS */
}
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
}
}
/* Set CRT2 FIFO on 300/540/630/730 */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static void
SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
{
} else {
-#ifdef SIS_LINUX_KERNEL
pci50 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
pciA0 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xa0);
-#else
- pci50 = pciReadLong(0x00000000, 0x50);
- pciA0 = pciReadLong(0x00000000, 0xA0);
-#endif
if(SiS_Pr->ChipType == SIS_730) {
#endif
/* Set CRT2 FIFO on 315/330 series */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void
SiS_SetCRT2FIFO_310(struct SiS_Private *SiS_Pr)
{
temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02));
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp); /* ? */
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "%d %d %d %d %d %d %d %d (%d %d %d %d)\n",
- SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
- SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
- SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-
- xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
- SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
- SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
- SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
- xf86DrvMsg(0, X_INFO, " 0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
- SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
- SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
- SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
- xf86DrvMsg(0, X_INFO, " 0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
}
/* Setup panel link
unsigned short push2, tempax, tempbx, tempcx, temp;
unsigned int tempeax = 0, tempebx, tempecx, tempvcfact = 0;
bool islvds = false, issis = false, chkdclkfirst = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
unsigned short crt2crtc = 0;
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short pushcx;
#endif
if(ModeNo <= 0x13) {
modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC;
#endif
} else if(SiS_Pr->UseCustomMode) {
} else {
modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
#endif
}
}
}
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
if(IS_SIS330) {
SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10);
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* 300 series */
+#ifdef CONFIG_FB_SIS_300 /* 300 series */
tempeax = SiS_Pr->SiS_VGAVDE << 6;
temp = (tempeax % (unsigned int)SiS_Pr->SiS_VDE);
tempeax = tempeax / (unsigned int)SiS_Pr->SiS_VDE;
temp = (unsigned short)(tempeax & 0x00FF);
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1E,temp); /* BPLVCFACT */
tempvcfact = temp;
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* 315 series */
+#ifdef CONFIG_FB_SIS_315 /* 315 series */
tempeax = SiS_Pr->SiS_VGAVDE << 18;
tempebx = SiS_Pr->SiS_VDE;
temp = (tempeax % tempebx);
temp = (unsigned short)(tempecx & 0x00FF);
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x23,temp);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
if((islvds) || (SiS_Pr->SiS_VBInfo & VB_SISLVDS)) {
}
#endif
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->SiS_IF_DEF_TRUMPION) {
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
unsigned char *trumpdata;
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) {
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x25,0x00);
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x26,0x00);
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x45,0x0a);
}
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
/* Set Part 1 */
SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex,
unsigned short RefreshRateTableIndex)
{
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
#endif
unsigned short temp=0, tempax=0, tempbx=0, tempcx=0, bridgeadd=0;
unsigned short pushbx=0, CRT1Index=0, modeflag, resinfo=0;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short tempbl=0;
#endif
(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) ) {
if(SiS_Pr->ChipType < SIS_315H ) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
SiS_SetCRT2FIFO_300(SiS_Pr, ModeNo);
#endif
} else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_SetCRT2FIFO_310(SiS_Pr);
#endif
}
if(SiS_Pr->ChipType < SIS_315H ) {
-#ifdef SIS300 /* ------------- 300 series --------------*/
+#ifdef CONFIG_FB_SIS_300 /* ------------- 300 series --------------*/
temp = (SiS_Pr->SiS_VGAHT - 1) & 0x0FF; /* BTVGA2HT 0x08,0x09 */
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,temp); /* CRT2 Horizontal Total */
bridgeadd = 12;
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* ------------------- 315/330 series --------------- */
+#ifdef CONFIG_FB_SIS_315 /* ------------------- 315/330 series --------------- */
tempcx = SiS_Pr->SiS_VGAHT; /* BTVGA2HT 0x08,0x09 */
if(modeflag & HalfDCLK) {
}
}
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
} /* 315/330 series */
if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300 /* ---------- 300 series -------------- */
+#ifdef CONFIG_FB_SIS_300 /* ---------- 300 series -------------- */
if(SiS_Pr->SiS_VBType & VB_SISVB) {
temp = 0x20;
SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp); /* Panel Link Delay Compensation; (Software Command Reset; Power Saving) */
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
} else {
-#ifdef SIS315H /* --------------- 315/330 series ---------------*/
+#ifdef CONFIG_FB_SIS_315 /* --------------- 315/330 series ---------------*/
if(SiS_Pr->ChipType < SIS_661) {
if(modeflag & HalfDCLK) tempax |= 0x40;
SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2C,0x3f,tempax);
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
}
/* SET PART 2 REGISTER GROUP */
/*********************************************/
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static unsigned char *
SiS_GetGroup2CLVXPtr(struct SiS_Private *SiS_Pr, int tabletype)
{
}
#endif
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static void
SiS_Group2LCDSpecial(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short crt2crtc)
{
unsigned int longtemp, PhaseIndex;
bool newtvphase;
const unsigned char *TimingPoint;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short resindex, CRT2Index;
const struct SiS_Part2PortTbl *CRT2Part2Ptr = NULL;
SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x17,0xFB);
SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x18,0xDF);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_GetCRT2Part2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex,
&CRT2Index, &resindex)) {
switch(CRT2Index) {
/* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx); /* lcdvdes */
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx); /* lcdvdee */
tempbx = SiS_Pr->CVSyncStart;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx); /* lcdvrs */
temp = (tempbx >> 4) & 0xF0;
temp |= (SiS_Pr->CVSyncEnd & 0x0f);
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f));
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
SiS_Group2LCDSpecial(SiS_Pr, ModeNo, crt2crtc);
#endif
tempax >>= 1;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx);
-#endif
-#endif
-
tempbx += bridgeoffset;
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx); /* lcdhdee */
tempbx += bridgeoffset;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx); /* lcdhrs */
SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0));
tempbx += bridgeoffset;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx); /* lcdhre */
SiS_SetGroup2_Tail(SiS_Pr, ModeNo);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
SiS_Set300Part2Regs(SiS_Pr, ModeIdIndex, RefreshRateTableIndex, ModeNo);
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
} /* CRT2-LCD from table */
#endif
}
/* SET PART 4 REGISTER GROUP */
/*********************************************/
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
#if 0
static void
SiS_ShiftXPos(struct SiS_Private *SiS_Pr, int shift)
if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
/* Chrontel 7005 - I assume that it does not come with a 315 series chip */
/* Chrontel 7019 - assumed that it does not come with a 300 series chip */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
unsigned short temp;
}
-#ifdef SIS315H /* ----------- 315 series only ---------- */
+#ifdef CONFIG_FB_SIS_315 /* ----------- 315 series only ---------- */
void
SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr)
bool
SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
{
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
#endif
unsigned short ModeIdIndex, RefreshRateTableIndex;
SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES);
- xf86DrvMsg(0, X_INFO, "(init301: HDE 0x%03x VDE 0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE);
- xf86DrvMsg(0, X_INFO, "(init301: VGAHDE 0x%03x VGAVDE 0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE);
- xf86DrvMsg(0, X_INFO, "(init301: HT 0x%03x VT 0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT);
- xf86DrvMsg(0, X_INFO, "(init301: VGAHT 0x%03x VGAVT 0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT);
-#endif
-#endif
-
if(SiS_Pr->SiS_SetFlag & LowModeTests) {
SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
}
if(SiS_Pr->SiS_SetFlag & LowModeTests) {
SiS_SetGroup2(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_SetGroup2_C_ELV(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
#endif
SiS_SetGroup3(SiS_Pr, ModeNo, ModeIdIndex);
SiS_SetGroup4(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_SetGroup4_C_ELV(SiS_Pr, ModeNo, ModeIdIndex);
#endif
SiS_SetGroup5(SiS_Pr, ModeNo, ModeIdIndex);
if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) {
if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
SiS_SetCH701xForLCD(SiS_Pr);
#endif
}
}
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
if(SiS_Pr->ChipType < SIS_315H) {
if(SiS_Pr->SiS_SetFlag & LowModeTests) {
if(SiS_Pr->SiS_UseOEM) {
}
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
if(SiS_Pr->ChipType >= SIS_315H) {
if(SiS_Pr->SiS_SetFlag & LowModeTests) {
if(SiS_Pr->ChipType < SIS_661) {
}
}
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static unsigned char *
SiS_SetTrumpBlockLoop(struct SiS_Private *SiS_Pr, unsigned char *dataptr)
{
dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr);
if(!dataptr) return false;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Trumpion block success\n");
-#endif
-#endif
return true;
}
#endif
SiS_SetChReg(SiS_Pr, reg, val, 0);
}
-#ifdef SIS_LINUX_KERNEL
static
-#endif
void
SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val)
{
/* Read from Chrontel 70xx */
/* Parameter is [Register no (S7-S0)] */
-#ifdef SIS_LINUX_KERNEL
static
-#endif
unsigned short
SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempbx)
{
}
/* Our own DDC functions */
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32,
SiS_SetupDDCN(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n",
- SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp);
-#endif
-#endif
return 0;
}
SiS_SetSwitchDDC2(SiS_Pr);
if(SiS_PrepareDDC(SiS_Pr)) {
SiS_SetStop(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n");
-#endif
-#endif
return 0xFFFF;
}
mask = 0xf0;
} else {
failed = true;
ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n");
-#endif
-#endif
}
}
if(!failed) {
if(temp == value) ret = 0;
else {
ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n");
-#endif
-#endif
if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) {
if(temp == 0x30) ret = 0;
}
return ret;
}
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
{
return flag;
}
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer)
{
temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index);
} while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog);
if (!watchdog) {
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n");
-#endif
-#endif
return 0xFFFF;
}
SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT);
/* =============== SiS 315/330 O.E.M. ================= */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static unsigned short
GetRAMDACromptr(struct SiS_Private *SiS_Pr)
/* ================= SiS 300 O.E.M. ================== */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static void
SetOEMLCDData2(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned short ModeIdIndex,
#ifndef _INIT301_H_
#define _INIT301_H_
-#include "osdef.h"
#include "initdef.h"
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#include "sis_regs.h"
-#endif
-
-#ifdef SIS_LINUX_KERNEL
#include "vgatypes.h"
#include "vstruct.h"
#ifdef SIS_CP
#include <linux/fb.h>
#include "sis.h"
#include <video/sisfb.h>
-#endif
static const unsigned char SiS_YPbPrTable[3][64] = {
{
0xFF,0xFF,
};
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
/* 661 et al LCD data structure (2.03.00) */
static const unsigned char SiS_LCDStruct661[] = {
/* 1024x768 */
};
#endif
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static unsigned char SiS300_TrumpionData[14][80] = {
{ 0x02,0x0A,0x0A,0x01,0x04,0x01,0x00,0x03,0x0D,0x00,0x0D,0x10,0x7F,0x00,0x80,0x02,
0x20,0x03,0x0B,0x00,0x90,0x01,0xC1,0x01,0x60,0x0C,0x30,0x10,0x00,0x00,0x04,0x23,
#endif
void SiS_UnLockCRT2(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void SiS_LockCRT2(struct SiS_Private *SiS_Pr);
-#endif
void SiS_EnableCRT2(struct SiS_Private *SiS_Pr);
unsigned short SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
void SiS_WaitRetrace1(struct SiS_Private *SiS_Pr);
unsigned short RefreshRateTableIndex);
unsigned short SiS_GetResInfo(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned short ModeIdIndex);
void SiS_DisableBridge(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void SiS_EnableBridge(struct SiS_Private *SiS_Pr);
-#endif
bool SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
void SiS_SiS30xBLOn(struct SiS_Private *SiS_Pr);
void SiS_SiS30xBLOff(struct SiS_Private *SiS_Pr);
unsigned short SiS_GetCH700x(struct SiS_Private *SiS_Pr, unsigned short tempax);
void SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
unsigned short SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#ifndef SIS_LINUX_KERNEL
-void SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-unsigned short SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#endif
void SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
unsigned char orval,unsigned short andval);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void SiS_Chrontel701xOn(struct SiS_Private *SiS_Pr);
static void SiS_Chrontel701xOff(struct SiS_Private *SiS_Pr);
static void SiS_ChrontelInitTVVSync(struct SiS_Private *SiS_Pr);
void SiS_Chrontel701xBLOff(struct SiS_Private *SiS_Pr);
#endif /* 315 */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static bool SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr);
void SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo);
#endif
unsigned short adaptnum, unsigned short DDCdatatype,
unsigned char *buffer, unsigned int VBFlags2);
-#ifdef SIS_XORG_XF86
-unsigned short SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
- int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
- bool checkcr32, unsigned int VBFlags2);
-unsigned short SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
-unsigned short SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
- unsigned char *buffer);
-#else
static unsigned short SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
bool checkcr32, unsigned int VBFlags2);
static unsigned short SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
static unsigned short SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
unsigned char *buffer);
-#endif
static void SiS_SetSwitchDDC2(struct SiS_Private *SiS_Pr);
static unsigned short SiS_SetStart(struct SiS_Private *SiS_Pr);
static unsigned short SiS_SetStop(struct SiS_Private *SiS_Pr);
static void SiS_SendACK(struct SiS_Private *SiS_Pr, unsigned short yesno);
static unsigned short SiS_DoProbeDDC(struct SiS_Private *SiS_Pr);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
static void SiS_OEM300Setting(struct SiS_Private *SiS_Pr,
unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefTabindex);
static void SetOEMLCDData2(struct SiS_Private *SiS_Pr,
unsigned short ModeNo, unsigned short ModeIdIndex,unsigned short RefTableIndex);
#endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
static void SiS_OEM310Setting(struct SiS_Private *SiS_Pr,
unsigned short ModeNo,unsigned short ModeIdIndex, unsigned short RRTI);
static void SiS_OEM661Setting(struct SiS_Private *SiS_Pr,
extern void SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
extern unsigned short SiS_GetRefCRTVCLK(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
extern unsigned short SiS_GetRefCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
extern void SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *tempbx,
unsigned short *tempcl);
extern unsigned short SiS_GetFIFOThresholdB300(unsigned short tempbx, unsigned short tempcl);
extern unsigned short SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
-#ifdef SIS_LINUX_KERNEL
extern unsigned int sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
extern unsigned int sisfb_read_lpc_pci_dword(struct SiS_Private *SiS_Pr, int reg);
#endif
-#endif
#endif
* Author: Thomas Winischhofer <thomas@winischhofer.net>
*/
-#include "osdef.h"
#include "initdef.h"
#include "vgatypes.h"
#include "vstruct.h"
if(rateindex > 0) rateindex--;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
switch(ModeNo) {
case 0x5a: ModeNo = 0x50; break;
case 0x5b: ModeNo = 0x56;
if(rateindex > 0) rateindex--;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
switch(ModeNo) {
case 0x5a: ModeNo = 0x50; break;
case 0x5b: ModeNo = 0x56;
if(rateindex > 0) rateindex--;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
switch(ModeNo) {
case 0x5a: ModeNo = 0x50; break;
case 0x5b: ModeNo = 0x56;
+++ /dev/null
-/* $XFree86$ */
-/* $XdotOrg$ */
-/*
- * OS depending defines
- *
- * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
- *
- * If distributed as part of the Linux kernel, the following license terms
- * apply:
- *
- * * This program is free software; you can redistribute it and/or modify
- * * it under the terms of the GNU General Public License as published by
- * * the Free Software Foundation; either version 2 of the named License,
- * * or any later version.
- * *
- * * This program is distributed in the hope that it will be useful,
- * * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * * GNU General Public License for more details.
- * *
- * * You should have received a copy of the GNU General Public License
- * * along with this program; if not, write to the Free Software
- * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * Otherwise, the following license terms apply:
- *
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * * 1) Redistributions of source code must retain the above copyright
- * * notice, this list of conditions and the following disclaimer.
- * * 2) Redistributions in binary form must reproduce the above copyright
- * * notice, this list of conditions and the following disclaimer in the
- * * documentation and/or other materials provided with the distribution.
- * * 3) The name of the author may not be used to endorse or promote products
- * * derived from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Author: Thomas Winischhofer <thomas@winischhofer.net>
- * Silicon Integrated Systems, Inc. (used by permission)
- *
- */
-
-#ifndef _SIS_OSDEF_H_
-#define _SIS_OSDEF_H_
-
-/* The choices are: */
-#define SIS_LINUX_KERNEL /* Linux kernel framebuffer */
-#undef SIS_XORG_XF86 /* XFree86/X.org */
-
-#ifdef OutPortByte
-#undef OutPortByte
-#endif
-
-#ifdef OutPortWord
-#undef OutPortWord
-#endif
-
-#ifdef OutPortLong
-#undef OutPortLong
-#endif
-
-#ifdef InPortByte
-#undef InPortByte
-#endif
-
-#ifdef InPortWord
-#undef InPortWord
-#endif
-
-#ifdef InPortLong
-#undef InPortLong
-#endif
-
-/**********************************************************************/
-/* LINUX KERNEL */
-/**********************************************************************/
-
-#ifdef SIS_LINUX_KERNEL
-
-#ifdef CONFIG_FB_SIS_300
-#define SIS300
-#endif
-
-#ifdef CONFIG_FB_SIS_315
-#define SIS315H
-#endif
-
-#if !defined(SIS300) && !defined(SIS315H)
-#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
-#warning sisfb will not work!
-#endif
-
-#define OutPortByte(p,v) outb((u8)(v),(SISIOADDRESS)(p))
-#define OutPortWord(p,v) outw((u16)(v),(SISIOADDRESS)(p))
-#define OutPortLong(p,v) outl((u32)(v),(SISIOADDRESS)(p))
-#define InPortByte(p) inb((SISIOADDRESS)(p))
-#define InPortWord(p) inw((SISIOADDRESS)(p))
-#define InPortLong(p) inl((SISIOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize)
-
-#endif /* LINUX_KERNEL */
-
-/**********************************************************************/
-/* XFree86/X.org */
-/**********************************************************************/
-
-#ifdef SIS_XORG_XF86
-
-#define SIS300
-#define SIS315H
-
-#define OutPortByte(p,v) outSISREG((IOADDRESS)(p),(CARD8)(v))
-#define OutPortWord(p,v) outSISREGW((IOADDRESS)(p),(CARD16)(v))
-#define OutPortLong(p,v) outSISREGL((IOADDRESS)(p),(CARD32)(v))
-#define InPortByte(p) inSISREG((IOADDRESS)(p))
-#define InPortWord(p) inSISREGW((IOADDRESS)(p))
-#define InPortLong(p) inSISREGL((IOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
-
-#endif /* XF86 */
-
-#endif /* _OSDEF_H_ */
#ifndef _SIS_H_
#define _SIS_H_
-#include "osdef.h"
#include <video/sisfb.h>
#include "vgatypes.h"
#include "sis.h"
#include "sis_main.h"
+#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315)
+#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
+#warning sisfb will not work!
+#endif
+
static void sisfb_handle_command(struct sis_video_info *ivideo,
struct sisfb_cmd *sisfb_command);
if(sisfb_check_rom(rom_base, ivideo)) {
if((myrombase = vmalloc(65536))) {
-
- /* Work around bug in pci/rom.c: Folks forgot to check
- * whether the size retrieved from the BIOS image eventually
- * is larger than the mapped size
- */
- if(pci_resource_len(pdev, PCI_ROM_RESOURCE) < romsize)
- romsize = pci_resource_len(pdev, PCI_ROM_RESOURCE);
-
memcpy_fromio(myrombase, rom_base,
(romsize > 65536) ? 65536 : romsize);
}
}
-#else
-
- pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &temp);
- pci_write_config_dword(pdev, PCI_ROM_ADDRESS,
- (ivideo->video_base & PCI_ROM_ADDRESS_MASK) | PCI_ROM_ADDRESS_ENABLE);
-
- rom_base = ioremap(ivideo->video_base, 65536);
- if(rom_base) {
- if(sisfb_check_rom(rom_base, ivideo)) {
- if((myrombase = vmalloc(65536)))
- memcpy_fromio(myrombase, rom_base, 65536);
- }
- iounmap(rom_base);
- }
-
- pci_write_config_dword(pdev, PCI_ROM_ADDRESS, temp);
-
#endif
return myrombase;
sisfb_post_map_vram(struct sis_video_info *ivideo, unsigned int *mapsize,
unsigned int min)
{
+ if (*mapsize < (min << 20))
+ return;
+
ivideo->video_vbase = ioremap(ivideo->video_base, (*mapsize));
if(!ivideo->video_vbase) {
} else {
#endif
/* Need to map max FB size for finding out about RAM size */
- mapsize = 64 << 20;
+ mapsize = ivideo->video_size;
sisfb_post_map_vram(ivideo, &mapsize, 4);
if(ivideo->video_vbase) {
orSISIDXREG(SISSR, 0x20, (0x80 | 0x04));
/* Need to map max FB size for finding out about RAM size */
- mapsize = 256 << 20;
+ mapsize = ivideo->video_size;
sisfb_post_map_vram(ivideo, &mapsize, 32);
if(!ivideo->video_vbase) {
}
ivideo->video_base = pci_resource_start(pdev, 0);
+ ivideo->video_size = pci_resource_len(pdev, 0);
ivideo->mmio_base = pci_resource_start(pdev, 1);
ivideo->mmio_size = pci_resource_len(pdev, 1);
ivideo->SiS_Pr.RelIO = pci_resource_start(pdev, 2) + 0x30;
#define SISIOMEMTYPE
-#ifdef SIS_LINUX_KERNEL
typedef unsigned long SISIOADDRESS;
#include <linux/types.h> /* Need __iomem */
#undef SISIOMEMTYPE
#define SISIOMEMTYPE __iomem
-#endif
-
-#ifdef SIS_XORG_XF86
-#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
-typedef unsigned long IOADDRESS;
-typedef unsigned long SISIOADDRESS;
-#else
-typedef IOADDRESS SISIOADDRESS;
-#endif
-#endif
typedef enum _SIS_CHIP_TYPE {
SIS_VGALegacy = 0,
{
unsigned char ChipType;
unsigned char ChipRevision;
-#ifdef SIS_XORG_XF86
- PCITAG PciTag;
-#endif
-#ifdef SIS_LINUX_KERNEL
void *ivideo;
-#endif
unsigned char *VirtualRomBase;
bool UseROM;
-#ifdef SIS_LINUX_KERNEL
unsigned char SISIOMEMTYPE *VideoMemoryAddress;
unsigned int VideoMemorySize;
-#endif
SISIOADDRESS IOAddress;
SISIOADDRESS IOAddress2; /* For dual chip XGI volari */
-#ifdef SIS_LINUX_KERNEL
SISIOADDRESS RelIO;
-#endif
SISIOADDRESS SiS_P3c4;
SISIOADDRESS SiS_P3d4;
SISIOADDRESS SiS_P3c0;
unsigned short SiS_IF_DEF_FSTN;
unsigned short SiS_SysFlags;
unsigned char SiS_VGAINFO;
-#ifdef SIS_XORG_XF86
- unsigned short SiS_CP1, SiS_CP2, SiS_CP3, SiS_CP4;
-#endif
bool SiS_UseROM;
bool SiS_ROMNew;
bool SiS_XGIROM;
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
- return sprintf(buf, "%hu", dev->id.device);
+ return sprintf(buf, "0x%04x\n", dev->id.device);
}
static ssize_t vendor_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
- return sprintf(buf, "%hu", dev->id.vendor);
+ return sprintf(buf, "0x%04x\n", dev->id.vendor);
}
static ssize_t status_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
- return sprintf(buf, "0x%08x", dev->config->get_status(dev));
+ return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
}
static ssize_t modalias_show(struct device *_d,
struct device_attribute *attr, char *buf)
pr_debug("Added buffer head %i to %p\n", head, vq);
END_USE(vq);
- /* If we're indirect, we can fit many (assuming not OOM). */
- if (vq->indirect)
- return vq->num_free ? vq->vring.num : 0;
return vq->num_free;
}
EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp);
This is the driver for the built-in watchdog timer on the IT8712F
Super I/0 chipset used on many motherboards.
+ If the driver does not work, then make sure that the game port in
+ the BIOS is enabled.
+
To compile this driver as a module, choose M here: the
module will be called it8712f_wdt.
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/reboot.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
}
}
-static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- bcm63xx_wdt_pause();
- return NOTIFY_DONE;
-}
-
static const struct file_operations bcm63xx_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.fops = &bcm63xx_wdt_fops,
};
-static struct notifier_block bcm63xx_wdt_notifier = {
- .notifier_call = bcm63xx_wdt_notify_sys,
-};
-
-static int bcm63xx_wdt_probe(struct platform_device *pdev)
+static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
wdt_time);
}
- ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
- if (ret) {
- dev_err(&pdev->dev, "failed to register reboot_notifier\n");
- goto unregister_timer;
- }
-
ret = misc_register(&bcm63xx_wdt_miscdev);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register watchdog device\n");
- goto unregister_reboot_notifier;
+ goto unregister_timer;
}
dev_info(&pdev->dev, " started, timer margin: %d sec\n",
return 0;
-unregister_reboot_notifier:
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
unregister_timer:
bcm63xx_timer_unregister(TIMER_WDT_ID);
unmap:
return ret;
}
-static int bcm63xx_wdt_remove(struct platform_device *pdev)
+static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev)
{
if (!nowayout)
bcm63xx_wdt_pause();
misc_deregister(&bcm63xx_wdt_miscdev);
-
- iounmap(bcm63xx_wdt_device.regs);
-
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
bcm63xx_timer_unregister(TIMER_WDT_ID);
-
+ iounmap(bcm63xx_wdt_device.regs);
return 0;
}
+static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
+{
+ bcm63xx_wdt_pause();
+}
+
static struct platform_driver bcm63xx_wdt = {
.probe = bcm63xx_wdt_probe,
- .remove = bcm63xx_wdt_remove,
+ .remove = __devexit_p(bcm63xx_wdt_remove),
+ .shutdown = bcm63xx_wdt_shutdown,
.driver = {
+ .owner = THIS_MODULE,
.name = "bcm63xx-wdt",
}
};
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
+#include <linux/fs.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/io.h>
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
* document number TBD : Cougar Point (CPT)
+ * document number TBD : Patsburg (PBG)
*/
/*
TCO_CPT29, /* Cougar Point */
TCO_CPT30, /* Cougar Point */
TCO_CPT31, /* Cougar Point */
- TCO_PBG, /* Patsburg */
+ TCO_PBG1, /* Patsburg */
+ TCO_PBG2, /* Patsburg */
};
static struct {
{"Cougar Point", 2},
{"Cougar Point", 2},
{"Patsburg", 2},
+ {"Patsburg", 2},
{NULL, 0}
};
{ ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)},
{ ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)},
{ ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)},
- { ITCO_PCI_DEVICE(0x1d40, TCO_PBG)},
+ { ITCO_PCI_DEVICE(0x1d40, TCO_PBG1)},
+ { ITCO_PCI_DEVICE(0x1d41, TCO_PBG2)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
struct resource *r;
struct rdc321x_wdt_pdata *pdata;
- pdata = pdev->dev.platform_data;
+ pdata = platform_get_drvdata(pdev);
if (!pdata) {
dev_err(&pdev->dev, "no platform data supplied\n");
return -ENODEV;
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
obj-$(CONFIG_XEN_BALLOON) += balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN) += evtchn.o
+obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o
obj-$(CONFIG_XENFS) += xenfs/
obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o
obj-$(CONFIG_XEN_PLATFORM_PCI) += platform-pci.o
obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o
obj-$(CONFIG_XEN_DOM0) += pci.o
+
+xen-evtchn-y := evtchn.o
+
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <asm/tlb.h>
+#include <asm/e820.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
}
/* balloon_append: add the given page to the balloon. */
-static void balloon_append(struct page *page)
+static void __balloon_append(struct page *page)
{
/* Lowmem is re-populated first, so highmem pages go at list tail. */
if (PageHighMem(page)) {
list_add(&page->lru, &ballooned_pages);
balloon_stats.balloon_low++;
}
+}
+static void balloon_append(struct page *page)
+{
+ __balloon_append(page);
totalram_pages--;
}
static int increase_reservation(unsigned long nr_pages)
{
- unsigned long pfn, i, flags;
+ unsigned long pfn, i;
struct page *page;
long rc;
struct xen_memory_reservation reservation = {
if (nr_pages > ARRAY_SIZE(frame_list))
nr_pages = ARRAY_SIZE(frame_list);
- spin_lock_irqsave(&xen_reservation_lock, flags);
-
page = balloon_first_page();
for (i = 0; i < nr_pages; i++) {
BUG_ON(page == NULL);
balloon_stats.current_pages += rc;
out:
- spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
return rc < 0 ? rc : rc != nr_pages;
}
static int decrease_reservation(unsigned long nr_pages)
{
- unsigned long pfn, i, flags;
+ unsigned long pfn, i;
struct page *page;
int need_sleep = 0;
int ret;
kmap_flush_unused();
flush_tlb_all();
- spin_lock_irqsave(&xen_reservation_lock, flags);
-
/* No more mappings: invalidate P2M and add to balloon. */
for (i = 0; i < nr_pages; i++) {
pfn = mfn_to_pfn(frame_list[i]);
balloon_stats.current_pages -= nr_pages;
- spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
return need_sleep;
}
static int __init balloon_init(void)
{
- unsigned long pfn;
+ unsigned long pfn, extra_pfn_end;
struct page *page;
if (!xen_pv_domain())
register_balloon(&balloon_sysdev);
- /* Initialise the balloon with excess memory space. */
- for (pfn = xen_start_info->nr_pages; pfn < max_pfn; pfn++) {
+ /*
+ * Initialise the balloon with excess memory space. We need
+ * to make sure we don't add memory which doesn't exist or
+ * logically exist. The E820 map can be trimmed to be smaller
+ * than the amount of physical memory due to the mem= command
+ * line parameter. And if this is a 32-bit non-HIGHMEM kernel
+ * on a system with memory which requires highmem to access,
+ * don't try to use it.
+ */
+ extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
+ (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
+ for (pfn = PFN_UP(xen_extra_mem_start);
+ pfn < extra_pfn_end;
+ pfn++) {
page = pfn_to_page(pfn);
- if (!PageReserved(page))
- balloon_append(page);
+ /* totalram_pages doesn't include the boot-time
+ balloon extension, so don't subtract from it. */
+ __balloon_append(page);
}
target_watch.callback = watch_target;
static struct irq_info *irq_info;
static int *pirq_to_irq;
-static int nr_pirqs;
static int *evtchn_to_irq;
struct cpu_evtchn_s {
cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu));
#endif
- __clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
- __set_bit(chn, cpu_evtchn_mask(cpu));
+ clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
+ set_bit(chn, cpu_evtchn_mask(cpu));
irq_info[irq].cpu = cpu;
}
static void init_evtchn_cpu_bindings(void)
{
+ int i;
#ifdef CONFIG_SMP
struct irq_desc *desc;
- int i;
/* By default all event channels notify CPU#0. */
for_each_irq_desc(i, desc) {
}
#endif
- memset(cpu_evtchn_mask(0), ~0, sizeof(struct cpu_evtchn_s));
+ for_each_possible_cpu(i)
+ memset(cpu_evtchn_mask(i),
+ (i == 0) ? ~0 : 0, sizeof(struct cpu_evtchn_s));
+
}
static inline void clear_evtchn(int port)
return ret;
}
-/* callers of this function should make sure that PHYSDEVOP_get_nr_pirqs
- * succeeded otherwise nr_pirqs won't hold the right value */
-static int find_unbound_pirq(void)
+static int find_unbound_pirq(int type)
{
- int i;
- for (i = nr_pirqs-1; i >= 0; i--) {
+ int rc, i;
+ struct physdev_get_free_pirq op_get_free_pirq;
+ op_get_free_pirq.type = type;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_free_pirq, &op_get_free_pirq);
+ if (!rc)
+ return op_get_free_pirq.pirq;
+
+ for (i = 0; i < nr_irqs; i++) {
if (pirq_to_irq[i] < 0)
return i;
}
if (irq == start)
goto no_irqs;
- res = irq_alloc_desc_at(irq, 0);
+ res = irq_alloc_desc_at(irq, -1);
if (WARN_ON(res != irq))
return -1;
spin_lock(&irq_mapping_update_lock);
- if ((pirq > nr_pirqs) || (gsi > nr_irqs)) {
+ if ((pirq > nr_irqs) || (gsi > nr_irqs)) {
printk(KERN_WARNING "xen_map_pirq_gsi: %s %s is incorrect!\n",
- pirq > nr_pirqs ? "nr_pirqs" :"",
- gsi > nr_irqs ? "nr_irqs" : "");
+ pirq > nr_irqs ? "pirq" :"",
+ gsi > nr_irqs ? "gsi" : "");
goto out;
}
if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
xen_pv_domain())) {
irq = gsi;
- irq_alloc_desc_at(irq, 0);
+ irq_alloc_desc_at(irq, -1);
} else
irq = find_unbound_irq();
#include <linux/msi.h>
#include "../pci/msi.h"
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc)
{
spin_lock(&irq_mapping_update_lock);
- *irq = find_unbound_irq();
- if (*irq == -1)
- goto out;
+ if (alloc & XEN_ALLOC_IRQ) {
+ *irq = find_unbound_irq();
+ if (*irq == -1)
+ goto out;
+ }
- *pirq = find_unbound_pirq();
- if (*pirq == -1)
- goto out;
+ if (alloc & XEN_ALLOC_PIRQ) {
+ *pirq = find_unbound_pirq(MAP_PIRQ_TYPE_MSI);
+ if (*pirq == -1)
+ goto out;
+ }
set_irq_chip_and_handler_name(*irq, &xen_pirq_chip,
handle_level_irq, name);
goto out;
if (xen_initial_domain()) {
- unmap_irq.pirq = info->u.pirq.gsi;
+ unmap_irq.pirq = info->u.pirq.pirq;
unmap_irq.domid = DOMID_SELF;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
if (rc) {
printk(KERN_WARNING "unmap irq failed %d\n", rc);
goto out;
}
+ pirq_to_irq[info->u.pirq.pirq] = -1;
}
irq_info[irq] = mk_unbound_info();
return gsi_from_irq(irq);
}
+int xen_irq_from_pirq(unsigned pirq)
+{
+ return pirq_to_irq[pirq];
+}
+
int bind_evtchn_to_irq(unsigned int evtchn)
{
int irq;
return ret;
}
+static void restore_cpu_pirqs(void)
+{
+ int pirq, rc, irq, gsi;
+ struct physdev_map_pirq map_irq;
+
+ for (pirq = 0; pirq < nr_irqs; pirq++) {
+ irq = pirq_to_irq[pirq];
+ if (irq == -1)
+ continue;
+
+ /* save/restore of PT devices doesn't work, so at this point the
+ * only devices present are GSI based emulated devices */
+ gsi = gsi_from_irq(irq);
+ if (!gsi)
+ continue;
+
+ map_irq.domid = DOMID_SELF;
+ map_irq.type = MAP_PIRQ_TYPE_GSI;
+ map_irq.index = gsi;
+ map_irq.pirq = pirq;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+ if (rc) {
+ printk(KERN_WARNING "xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n",
+ gsi, irq, pirq, rc);
+ irq_info[irq] = mk_unbound_info();
+ pirq_to_irq[pirq] = -1;
+ continue;
+ }
+
+ printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+
+ startup_pirq(irq);
+ }
+}
+
static void restore_cpu_virqs(unsigned int cpu)
{
struct evtchn_bind_virq bind_virq;
unmask_evtchn(evtchn);
}
+
+ restore_cpu_pirqs();
}
static struct irq_chip xen_dynamic_chip __read_mostly = {
void __init xen_init_IRQ(void)
{
- int i, rc;
- struct physdev_nr_pirqs op_nr_pirqs;
+ int i;
cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
GFP_KERNEL);
irq_info = kcalloc(nr_irqs, sizeof(*irq_info), GFP_KERNEL);
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_nr_pirqs, &op_nr_pirqs);
- if (rc < 0) {
- nr_pirqs = nr_irqs;
- if (rc != -ENOSYS)
- printk(KERN_WARNING "PHYSDEVOP_get_nr_pirqs returned rc=%d\n", rc);
- } else {
- if (xen_pv_domain() && !xen_initial_domain())
- nr_pirqs = max((int)op_nr_pirqs.nr_pirqs, nr_irqs);
- else
- nr_pirqs = op_nr_pirqs.nr_pirqs;
- }
- pirq_to_irq = kcalloc(nr_pirqs, sizeof(*pirq_to_irq), GFP_KERNEL);
- for (i = 0; i < nr_pirqs; i++)
+ /* We are using nr_irqs as the maximum number of pirq available but
+ * that number is actually chosen by Xen and we don't know exactly
+ * what it is. Be careful choosing high pirq numbers. */
+ pirq_to_irq = kcalloc(nr_irqs, sizeof(*pirq_to_irq), GFP_KERNEL);
+ for (i = 0; i < nr_irqs; i++)
pirq_to_irq[i] = -1;
evtchn_to_irq = kcalloc(NR_EVENT_CHANNELS, sizeof(*evtchn_to_irq),
const char *name;
};
-/* Who's bound to each port? */
-static struct per_user_data *port_user[NR_EVENT_CHANNELS];
+/*
+ * Who's bound to each port? This is logically an array of struct
+ * per_user_data *, but we encode the current enabled-state in bit 0.
+ */
+static unsigned long *port_user;
static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */
-irqreturn_t evtchn_interrupt(int irq, void *data)
+static inline struct per_user_data *get_port_user(unsigned port)
+{
+ return (struct per_user_data *)(port_user[port] & ~1);
+}
+
+static inline void set_port_user(unsigned port, struct per_user_data *u)
+{
+ port_user[port] = (unsigned long)u;
+}
+
+static inline bool get_port_enabled(unsigned port)
+{
+ return port_user[port] & 1;
+}
+
+static inline void set_port_enabled(unsigned port, bool enabled)
+{
+ if (enabled)
+ port_user[port] |= 1;
+ else
+ port_user[port] &= ~1;
+}
+
+static irqreturn_t evtchn_interrupt(int irq, void *data)
{
unsigned int port = (unsigned long)data;
struct per_user_data *u;
spin_lock(&port_user_lock);
- u = port_user[port];
+ u = get_port_user(port);
+
+ WARN(!get_port_enabled(port),
+ "Interrupt for port %d, but apparently not enabled; per-user %p\n",
+ port, u);
disable_irq_nosync(irq);
+ set_port_enabled(port, false);
if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) {
u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port;
kill_fasync(&u->evtchn_async_queue,
SIGIO, POLL_IN);
}
- } else {
+ } else
u->ring_overflow = 1;
- }
spin_unlock(&port_user_lock);
goto out;
spin_lock_irq(&port_user_lock);
- for (i = 0; i < (count/sizeof(evtchn_port_t)); i++)
- if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u))
- enable_irq(irq_from_evtchn(kbuf[i]));
+
+ for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) {
+ unsigned port = kbuf[i];
+
+ if (port < NR_EVENT_CHANNELS &&
+ get_port_user(port) == u &&
+ !get_port_enabled(port)) {
+ set_port_enabled(port, true);
+ enable_irq(irq_from_evtchn(port));
+ }
+ }
+
spin_unlock_irq(&port_user_lock);
rc = count;
* interrupt handler yet, and our caller has already
* serialized bind operations.)
*/
- BUG_ON(port_user[port] != NULL);
- port_user[port] = u;
+ BUG_ON(get_port_user(port) != NULL);
+ set_port_user(port, u);
+ set_port_enabled(port, true); /* start enabled */
rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED,
u->name, (void *)(unsigned long)port);
unbind_from_irqhandler(irq, (void *)(unsigned long)port);
- /* make sure we unbind the irq handler before clearing the port */
- barrier();
-
- port_user[port] = NULL;
+ set_port_user(port, NULL);
}
static long evtchn_ioctl(struct file *file,
spin_lock_irq(&port_user_lock);
rc = -ENOTCONN;
- if (port_user[unbind.port] != u) {
+ if (get_port_user(unbind.port) != u) {
spin_unlock_irq(&port_user_lock);
break;
}
- evtchn_unbind_from_user(u, unbind.port);
+ disable_irq(irq_from_evtchn(unbind.port));
spin_unlock_irq(&port_user_lock);
+ evtchn_unbind_from_user(u, unbind.port);
+
rc = 0;
break;
}
if (notify.port >= NR_EVENT_CHANNELS) {
rc = -EINVAL;
- } else if (port_user[notify.port] != u) {
+ } else if (get_port_user(notify.port) != u) {
rc = -ENOTCONN;
} else {
notify_remote_via_evtchn(notify.port);
filp->private_data = u;
- return 0;
+ return nonseekable_open(inode, filp);;
}
static int evtchn_release(struct inode *inode, struct file *filp)
free_page((unsigned long)u->ring);
for (i = 0; i < NR_EVENT_CHANNELS; i++) {
- if (port_user[i] != u)
+ if (get_port_user(i) != u)
continue;
- evtchn_unbind_from_user(port_user[i], i);
+ disable_irq(irq_from_evtchn(i));
}
spin_unlock_irq(&port_user_lock);
+ for (i = 0; i < NR_EVENT_CHANNELS; i++) {
+ if (get_port_user(i) != u)
+ continue;
+
+ evtchn_unbind_from_user(get_port_user(i), i);
+ }
+
kfree(u->name);
kfree(u);
.fasync = evtchn_fasync,
.open = evtchn_open,
.release = evtchn_release,
- .llseek = noop_llseek,
+ .llseek = no_llseek,
};
static struct miscdevice evtchn_miscdev = {
.minor = MISC_DYNAMIC_MINOR,
- .name = "evtchn",
+ .name = "xen/evtchn",
.fops = &evtchn_fops,
};
static int __init evtchn_init(void)
if (!xen_domain())
return -ENODEV;
+ port_user = kcalloc(NR_EVENT_CHANNELS, sizeof(*port_user), GFP_KERNEL);
+ if (port_user == NULL)
+ return -ENOMEM;
+
spin_lock_init(&port_user_lock);
- memset(port_user, 0, sizeof(port_user));
/* Create '/dev/misc/evtchn'. */
err = misc_register(&evtchn_miscdev);
static void __exit evtchn_cleanup(void)
{
+ kfree(port_user);
+ port_user = NULL;
+
misc_deregister(&evtchn_miscdev);
}
if (!*cancelled) {
xen_irq_resume();
+ xen_console_resume();
xen_timer_resume();
}
#include <linux/mman.h>
#include <linux/uaccess.h>
#include <linux/swap.h>
-#include <linux/smp_lock.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/seq_file.h>
xen_pfn_t *mfnp = data;
struct mmap_batch_state *st = state;
- put_user(*mfnp, st->user++);
-
- return 0;
+ return put_user(*mfnp, st->user++);
}
static struct vm_operations_struct privcmd_vm_ops;
up_write(&mm->mmap_sem);
if (state.err > 0) {
- ret = 0;
-
state.user = m.arr;
- traverse_pages(m.num, sizeof(xen_pfn_t),
+ ret = traverse_pages(m.num, sizeof(xen_pfn_t),
&pagelist,
mmap_return_errors, &state);
}
if (xen_feature(XENFEAT_auto_translated_physmap))
return -ENOSYS;
- /* DONTCOPY is essential for Xen as copy_page_range is broken. */
- vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY;
+ /* DONTCOPY is essential for Xen because copy_page_range doesn't know
+ * how to recreate these mappings */
+ vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY | VM_PFNMAP;
vma->vm_ops = &privcmd_vm_ops;
vma->vm_private_data = NULL;
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/magic.h>
-#include <linux/mm.h>
-#include <linux/backing-dev.h>
#include <xen/xen.h>
MODULE_DESCRIPTION("Xen filesystem");
MODULE_LICENSE("GPL");
-static int xenfs_set_page_dirty(struct page *page)
-{
- return !TestSetPageDirty(page);
-}
-
-static const struct address_space_operations xenfs_aops = {
- .set_page_dirty = xenfs_set_page_dirty,
-};
-
-static struct backing_dev_info xenfs_backing_dev_info = {
- .ra_pages = 0, /* No readahead */
- .capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
-};
-
static struct inode *xenfs_make_inode(struct super_block *sb, int mode)
{
struct inode *ret = new_inode(sb);
if (ret) {
ret->i_mode = mode;
- ret->i_mapping->a_ops = &xenfs_aops;
- ret->i_mapping->backing_dev_info = &xenfs_backing_dev_info;
ret->i_uid = ret->i_gid = 0;
ret->i_blocks = 0;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
return rc;
}
-static int xenfs_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name,
- void *data)
+static struct dentry *xenfs_mount(struct file_system_type *fs_type,
+ int flags, const char *dev_name,
+ void *data)
{
return mount_single(fs_type, flags, data, xenfs_fill_super);
}
static int __init xenfs_init(void)
{
- int err;
- if (!xen_domain()) {
- printk(KERN_INFO "xenfs: not registering filesystem on non-xen platform\n");
- return 0;
- }
-
- err = register_filesystem(&xenfs_type);
- if (err) {
- printk(KERN_ERR "xenfs: Unable to register filesystem!\n");
- goto out;
- }
-
- err = bdi_init(&xenfs_backing_dev_info);
- if (err)
- unregister_filesystem(&xenfs_type);
-
- out:
+ if (xen_domain())
+ return register_filesystem(&xenfs_type);
- return err;
+ printk(KERN_INFO "XENFS: not registering filesystem on non-xen platform\n");
+ return 0;
}
static void __exit xenfs_exit(void)
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/amigahw.h>
#include <asm/setup.h>
}
}
-static DEFINE_MUTEX(autofs4_ioctl_mutex);
-
static long autofs4_root_ioctl(struct file *filp,
unsigned int cmd, unsigned long arg)
{
- long ret;
struct inode *inode = filp->f_dentry->d_inode;
-
- mutex_lock(&autofs4_ioctl_mutex);
- ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
- mutex_unlock(&autofs4_ioctl_mutex);
-
- return ret;
+ return autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
}
#ifdef CONFIG_COMPAT
struct inode *inode = filp->f_path.dentry->d_inode;
int ret;
- mutex_lock(&autofs4_ioctl_mutex);
if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
else
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
(unsigned long)compat_ptr(arg));
- mutex_unlock(&autofs4_ioctl_mutex);
return ret;
}
#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/major.h>
-#include <linux/smp_lock.h>
#include <linux/device_cgroup.h>
#include <linux/highmem.h>
#include <linux/blkdev.h>
static struct bio *compressed_bio_alloc(struct block_device *bdev,
u64 first_byte, gfp_t gfp_flags)
{
- struct bio *bio;
int nr_vecs;
nr_vecs = bio_get_nr_vecs(bdev);
- bio = bio_alloc(gfp_flags, nr_vecs);
-
- if (bio == NULL && (current->flags & PF_MEMALLOC)) {
- while (!bio && (nr_vecs /= 2))
- bio = bio_alloc(gfp_flags, nr_vecs);
- }
-
- if (bio) {
- bio->bi_size = 0;
- bio->bi_bdev = bdev;
- bio->bi_sector = first_byte >> 9;
- }
- return bio;
+ return btrfs_bio_alloc(bdev, first_byte >> 9, nr_vecs, gfp_flags);
}
static int check_compressed_csum(struct inode *inode,
int extents_thresh;
int free_extents;
int total_bitmaps;
- int ro:1;
- int dirty:1;
- int iref:1;
+ unsigned int ro:1;
+ unsigned int dirty:1;
+ unsigned int iref:1;
int disk_cache_state;
#include <linux/freezer.h>
#include <linux/crc32c.h>
#include <linux/slab.h>
+#include <linux/migrate.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
ret = btree_read_extent_buffer_pages(root, eb, start + PAGE_CACHE_SIZE,
btrfs_header_generation(eb));
BUG_ON(ret);
+ WARN_ON(!btrfs_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN));
+
found_start = btrfs_header_bytenr(eb);
if (found_start != start) {
WARN_ON(1);
__btree_submit_bio_done);
}
+#ifdef CONFIG_MIGRATION
+static int btree_migratepage(struct address_space *mapping,
+ struct page *newpage, struct page *page)
+{
+ /*
+ * we can't safely write a btree page from here,
+ * we haven't done the locking hook
+ */
+ if (PageDirty(page))
+ return -EAGAIN;
+ /*
+ * Buffers may be managed in a filesystem specific way.
+ * We must have no buffers or drop them.
+ */
+ if (page_has_private(page) &&
+ !try_to_release_page(page, GFP_KERNEL))
+ return -EAGAIN;
+ return migrate_page(mapping, newpage, page);
+}
+#endif
+
static int btree_writepage(struct page *page, struct writeback_control *wbc)
{
struct extent_io_tree *tree;
}
redirty_page_for_writepage(wbc, page);
- eb = btrfs_find_tree_block(root, page_offset(page),
- PAGE_CACHE_SIZE);
+ eb = btrfs_find_tree_block(root, page_offset(page), PAGE_CACHE_SIZE);
WARN_ON(!eb);
was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags);
.releasepage = btree_releasepage,
.invalidatepage = btree_invalidatepage,
.sync_page = block_sync_page,
+#ifdef CONFIG_MIGRATION
+ .migratepage = btree_migratepage,
+#endif
};
int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
- BUG_ON(!root->node);
+ if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) {
+ free_extent_buffer(root->node);
+ return -EIO;
+ }
root->commit_root = btrfs_root_node(root);
return 0;
}
GFP_NOFS);
struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
GFP_NOFS);
- struct btrfs_root *tree_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
- struct btrfs_fs_info *fs_info = kzalloc(sizeof(*fs_info),
- GFP_NOFS);
+ struct btrfs_root *tree_root = btrfs_sb(sb);
+ struct btrfs_fs_info *fs_info = tree_root->fs_info;
struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
GFP_NOFS);
struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
static struct dentry *btrfs_get_parent(struct dentry *child)
{
struct inode *dir = child->d_inode;
- static struct dentry *dentry;
+ struct dentry *dentry;
struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_path *path;
struct extent_buffer *leaf;
return ERR_PTR(ret);
}
+static int btrfs_get_name(struct dentry *parent, char *name,
+ struct dentry *child)
+{
+ struct inode *inode = child->d_inode;
+ struct inode *dir = parent->d_inode;
+ struct btrfs_path *path;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
+ struct btrfs_inode_ref *iref;
+ struct btrfs_root_ref *rref;
+ struct extent_buffer *leaf;
+ unsigned long name_ptr;
+ struct btrfs_key key;
+ int name_len;
+ int ret;
+
+ if (!dir || !inode)
+ return -EINVAL;
+
+ if (!S_ISDIR(dir->i_mode))
+ return -EINVAL;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+ path->leave_spinning = 1;
+
+ if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ key.objectid = BTRFS_I(inode)->root->root_key.objectid;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
+ key.offset = (u64)-1;
+ root = root->fs_info->tree_root;
+ } else {
+ key.objectid = inode->i_ino;
+ key.offset = dir->i_ino;
+ key.type = BTRFS_INODE_REF_KEY;
+ }
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0) {
+ btrfs_free_path(path);
+ return ret;
+ } else if (ret > 0) {
+ if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ path->slots[0]--;
+ } else {
+ btrfs_free_path(path);
+ return -ENOENT;
+ }
+ }
+ leaf = path->nodes[0];
+
+ if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ rref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_root_ref);
+ name_ptr = (unsigned long)(rref + 1);
+ name_len = btrfs_root_ref_name_len(leaf, rref);
+ } else {
+ iref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_inode_ref);
+ name_ptr = (unsigned long)(iref + 1);
+ name_len = btrfs_inode_ref_name_len(leaf, iref);
+ }
+
+ read_extent_buffer(leaf, name, name_ptr, name_len);
+ btrfs_free_path(path);
+
+ /*
+ * have to add the null termination to make sure that reconnect_path
+ * gets the right len for strlen
+ */
+ name[name_len] = '\0';
+
+ return 0;
+}
+
const struct export_operations btrfs_export_ops = {
.encode_fh = btrfs_encode_fh,
.fh_to_dentry = btrfs_fh_to_dentry,
.fh_to_parent = btrfs_fh_to_parent,
.get_parent = btrfs_get_parent,
+ .get_name = btrfs_get_name,
};
static int cache_block_group(struct btrfs_block_group_cache *cache,
struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
int load_cache_only)
{
struct btrfs_fs_info *fs_info = cache->fs_info;
/*
* We can't do the read from on-disk cache during a commit since we need
- * to have the normal tree locking.
+ * to have the normal tree locking. Also if we are currently trying to
+ * allocate blocks for the tree root we can't do the fast caching since
+ * we likely hold important locks.
*/
- if (!trans->transaction->in_commit) {
+ if (!trans->transaction->in_commit &&
+ (root && root != root->fs_info->tree_root)) {
spin_lock(&cache->lock);
if (cache->cached != BTRFS_CACHE_NO) {
spin_unlock(&cache->lock);
struct btrfs_root *root = block_group->fs_info->tree_root;
struct inode *inode = NULL;
u64 alloc_hint = 0;
+ int dcs = BTRFS_DC_ERROR;
int num_pages = 0;
int retries = 0;
int ret = 0;
spin_lock(&block_group->lock);
if (block_group->cached != BTRFS_CACHE_FINISHED) {
+ /* We're not cached, don't bother trying to write stuff out */
+ dcs = BTRFS_DC_WRITTEN;
spin_unlock(&block_group->lock);
goto out_put;
}
ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, num_pages,
num_pages, num_pages,
&alloc_hint);
+ if (!ret)
+ dcs = BTRFS_DC_SETUP;
btrfs_free_reserved_data_space(inode, num_pages);
out_put:
iput(inode);
btrfs_release_path(root, path);
out:
spin_lock(&block_group->lock);
- if (ret)
- block_group->disk_cache_state = BTRFS_DC_ERROR;
- else
- block_group->disk_cache_state = BTRFS_DC_SETUP;
+ block_group->disk_cache_state = dcs;
spin_unlock(&block_group->lock);
return ret;
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags)
{
- u64 num_devices = root->fs_info->fs_devices->rw_devices;
+ /*
+ * we add in the count of missing devices because we want
+ * to make sure that any RAID levels on a degraded FS
+ * continue to be honored.
+ */
+ u64 num_devices = root->fs_info->fs_devices->rw_devices +
+ root->fs_info->fs_devices->missing_devices;
if (num_devices == 1)
flags &= ~(BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID0);
* our reservation.
*/
if (unused <= space_info->total_bytes) {
- unused -= space_info->total_bytes;
+ unused = space_info->total_bytes - unused;
if (unused >= num_bytes) {
if (!reserved)
space_info->bytes_reserved += orig_bytes;
* space back to the block group, otherwise we will leak space.
*/
if (!alloc && cache->cached == BTRFS_CACHE_NO)
- cache_block_group(cache, trans, 1);
+ cache_block_group(cache, trans, NULL, 1);
byte_in_group = bytenr - cache->key.objectid;
WARN_ON(byte_in_group > cache->key.offset);
btrfs_get_block_group(block_group);
search_start = block_group->key.objectid;
+ /*
+ * this can happen if we end up cycling through all the
+ * raid types, but we want to make sure we only allocate
+ * for the proper type.
+ */
+ if (!block_group_bits(block_group, data)) {
+ u64 extra = BTRFS_BLOCK_GROUP_DUP |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10;
+
+ /*
+ * if they asked for extra copies and this block group
+ * doesn't provide them, bail. This does allow us to
+ * fill raid0 from raid1.
+ */
+ if ((data & extra) && !(block_group->flags & extra))
+ goto loop;
+ }
+
have_block_group:
if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
u64 free_percent;
- ret = cache_block_group(block_group, trans, 1);
+ ret = cache_block_group(block_group, trans,
+ orig_root, 1);
if (block_group->cached == BTRFS_CACHE_FINISHED)
goto have_block_group;
if (loop > LOOP_CACHING_NOWAIT ||
(loop > LOOP_FIND_IDEAL &&
atomic_read(&space_info->caching_threads) < 2)) {
- ret = cache_block_group(block_group, trans, 0);
+ ret = cache_block_group(block_group, trans,
+ orig_root, 0);
BUG_ON(ret);
}
found_uncached_bg = true;
u64 num_bytes = ins->offset;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
- cache_block_group(block_group, trans, 0);
+ cache_block_group(block_group, trans, NULL, 0);
caching_ctl = get_caching_control(block_group);
if (!caching_ctl) {
NULL, NULL);
BUG_ON(ret < 0);
if (ret > 0) {
- ret = btrfs_del_orphan_item(trans, tree_root,
- root->root_key.objectid);
- BUG_ON(ret);
+ /* if we fail to delete the orphan item this time
+ * around, it'll get picked up the next time.
+ *
+ * The most common failure here is just -ENOENT.
+ */
+ btrfs_del_orphan_item(trans, tree_root,
+ root->root_key.objectid);
}
}
u64 stripped = BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID10;
- num_devices = root->fs_info->fs_devices->rw_devices;
+ /*
+ * we add in the count of missing devices because we want
+ * to make sure that any RAID levels on a degraded FS
+ * continue to be honored.
+ */
+ num_devices = root->fs_info->fs_devices->rw_devices +
+ root->fs_info->fs_devices->missing_devices;
+
if (num_devices == 1) {
stripped |= BTRFS_BLOCK_GROUP_DUP;
stripped = flags & ~stripped;
break;
if (ret != 0)
goto error;
-
leaf = path->nodes[0];
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
cache = kzalloc(sizeof(*cache), GFP_NOFS);
bio_put(bio);
}
-static struct bio *
-extent_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
- gfp_t gfp_flags)
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+ gfp_t gfp_flags)
{
struct bio *bio;
else
nr = bio_get_nr_vecs(bdev);
- bio = extent_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
+ bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
bio_add_page(bio, page, page_size, offset);
bio->bi_end_io = end_io_func;
int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len, get_extent_t *get_extent)
{
- int ret;
+ int ret = 0;
u64 off = start;
u64 max = start + len;
u32 flags = 0;
+ u32 found_type;
+ u64 last;
u64 disko = 0;
+ struct btrfs_key found_key;
struct extent_map *em = NULL;
struct extent_state *cached_state = NULL;
+ struct btrfs_path *path;
+ struct btrfs_file_extent_item *item;
int end = 0;
u64 em_start = 0, em_len = 0;
unsigned long emflags;
- ret = 0;
+ int hole = 0;
if (len == 0)
return -EINVAL;
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+ path->leave_spinning = 1;
+
+ ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root,
+ path, inode->i_ino, -1, 0);
+ if (ret < 0) {
+ btrfs_free_path(path);
+ return ret;
+ }
+ WARN_ON(!ret);
+ path->slots[0]--;
+ item = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]);
+ found_type = btrfs_key_type(&found_key);
+
+ /* No extents, just return */
+ if (found_key.objectid != inode->i_ino ||
+ found_type != BTRFS_EXTENT_DATA_KEY) {
+ btrfs_free_path(path);
+ return 0;
+ }
+ last = found_key.offset;
+ btrfs_free_path(path);
+
lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
&cached_state, GFP_NOFS);
em = get_extent(inode, NULL, 0, off, max - off, 0);
ret = PTR_ERR(em);
goto out;
}
+
while (!end) {
+ hole = 0;
off = em->start + em->len;
if (off >= max)
end = 1;
+ if (em->block_start == EXTENT_MAP_HOLE) {
+ hole = 1;
+ goto next;
+ }
+
em_start = em->start;
em_len = em->len;
if (em->block_start == EXTENT_MAP_LAST_BYTE) {
end = 1;
flags |= FIEMAP_EXTENT_LAST;
- } else if (em->block_start == EXTENT_MAP_HOLE) {
- flags |= FIEMAP_EXTENT_UNWRITTEN;
} else if (em->block_start == EXTENT_MAP_INLINE) {
flags |= (FIEMAP_EXTENT_DATA_INLINE |
FIEMAP_EXTENT_NOT_ALIGNED);
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
flags |= FIEMAP_EXTENT_ENCODED;
+next:
emflags = em->flags;
free_extent_map(em);
em = NULL;
-
if (!end) {
em = get_extent(inode, NULL, 0, off, max - off, 0);
if (!em)
}
emflags = em->flags;
}
+
if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) {
flags |= FIEMAP_EXTENT_LAST;
end = 1;
}
- ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
- em_len, flags);
- if (ret)
- goto out_free;
+ if (em_start == last) {
+ flags |= FIEMAP_EXTENT_LAST;
+ end = 1;
+ }
+
+ if (!hole) {
+ ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
+ em_len, flags);
+ if (ret)
+ goto out_free;
+ }
}
out_free:
free_extent_map(em);
spin_lock(&tree->buffer_lock);
eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
- if (!eb)
- goto out;
+ if (!eb) {
+ spin_unlock(&tree->buffer_lock);
+ return ret;
+ }
if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
ret = 0;
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
unsigned long op);
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+ gfp_t gfp_flags);
#endif
struct page **prepared_pages,
struct iov_iter *i)
{
- size_t copied;
+ size_t copied = 0;
int pg = 0;
int offset = pos & (PAGE_CACHE_SIZE - 1);
+ int total_copied = 0;
while (write_bytes > 0) {
size_t count = min_t(size_t,
PAGE_CACHE_SIZE - offset, write_bytes);
struct page *page = prepared_pages[pg];
-again:
- if (unlikely(iov_iter_fault_in_readable(i, count)))
- return -EFAULT;
-
- /* Copy data from userspace to the current page */
- copied = iov_iter_copy_from_user(page, i, offset, count);
+ /*
+ * Copy data from userspace to the current page
+ *
+ * Disable pagefault to avoid recursive lock since
+ * the pages are already locked
+ */
+ pagefault_disable();
+ copied = iov_iter_copy_from_user_atomic(page, i, offset, count);
+ pagefault_enable();
/* Flush processor's dcache for this page */
flush_dcache_page(page);
iov_iter_advance(i, copied);
write_bytes -= copied;
+ total_copied += copied;
+ /* Return to btrfs_file_aio_write to fault page */
if (unlikely(copied == 0)) {
- count = min_t(size_t, PAGE_CACHE_SIZE - offset,
- iov_iter_single_seg_count(i));
- goto again;
+ break;
}
if (unlikely(copied < PAGE_CACHE_SIZE - offset)) {
offset = 0;
}
}
- return 0;
+ return total_copied;
}
/*
unsigned long last_index;
int will_write;
int buffered = 0;
+ int copied = 0;
+ int dirty_pages = 0;
will_write = ((file->f_flags & O_DSYNC) || IS_SYNC(inode) ||
(file->f_flags & O_DIRECT));
WARN_ON(num_pages > nrptrs);
memset(pages, 0, sizeof(struct page *) * nrptrs);
- ret = btrfs_delalloc_reserve_space(inode, write_bytes);
+ /*
+ * Fault pages before locking them in prepare_pages
+ * to avoid recursive lock
+ */
+ if (unlikely(iov_iter_fault_in_readable(&i, write_bytes))) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = btrfs_delalloc_reserve_space(inode,
+ num_pages << PAGE_CACHE_SHIFT);
if (ret)
goto out;
pos, first_index, last_index,
write_bytes);
if (ret) {
- btrfs_delalloc_release_space(inode, write_bytes);
+ btrfs_delalloc_release_space(inode,
+ num_pages << PAGE_CACHE_SHIFT);
goto out;
}
- ret = btrfs_copy_from_user(pos, num_pages,
+ copied = btrfs_copy_from_user(pos, num_pages,
write_bytes, pages, &i);
- if (ret == 0) {
+ dirty_pages = (copied + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT;
+
+ if (num_pages > dirty_pages) {
+ if (copied > 0)
+ atomic_inc(
+ &BTRFS_I(inode)->outstanding_extents);
+ btrfs_delalloc_release_space(inode,
+ (num_pages - dirty_pages) <<
+ PAGE_CACHE_SHIFT);
+ }
+
+ if (copied > 0) {
dirty_and_release_pages(NULL, root, file, pages,
- num_pages, pos, write_bytes);
+ dirty_pages, pos, copied);
}
btrfs_drop_pages(pages, num_pages);
- if (ret) {
- btrfs_delalloc_release_space(inode, write_bytes);
- goto out;
- }
- if (will_write) {
- filemap_fdatawrite_range(inode->i_mapping, pos,
- pos + write_bytes - 1);
- } else {
- balance_dirty_pages_ratelimited_nr(inode->i_mapping,
- num_pages);
- if (num_pages <
- (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
- btrfs_btree_balance_dirty(root, 1);
- btrfs_throttle(root);
+ if (copied > 0) {
+ if (will_write) {
+ filemap_fdatawrite_range(inode->i_mapping, pos,
+ pos + copied - 1);
+ } else {
+ balance_dirty_pages_ratelimited_nr(
+ inode->i_mapping,
+ dirty_pages);
+ if (dirty_pages <
+ (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
+ btrfs_btree_balance_dirty(root, 1);
+ btrfs_throttle(root);
+ }
}
- pos += write_bytes;
- num_written += write_bytes;
+ pos += copied;
+ num_written += copied;
cond_resched();
}
if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) {
trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ num_written = PTR_ERR(trans);
+ goto done;
+ }
+ mutex_lock(&inode->i_mutex);
ret = btrfs_log_dentry_safe(trans, root,
file->f_dentry);
+ mutex_unlock(&inode->i_mutex);
if (ret == 0) {
ret = btrfs_sync_log(trans, root);
if (ret == 0)
(start_pos + num_written - 1) >> PAGE_CACHE_SHIFT);
}
}
+done:
current->backing_dev_info = NULL;
return num_written ? num_written : err;
}
(unsigned long long)BTRFS_I(inode)->generation,
(unsigned long long)generation,
(unsigned long long)block_group->key.objectid);
- goto out;
+ goto free_cache;
}
if (!num_entries)
return 0;
}
+ node = rb_first(&block_group->free_space_offset);
+ if (!node) {
+ iput(inode);
+ return 0;
+ }
+
last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
filemap_write_and_wait(inode->i_mapping);
btrfs_wait_ordered_range(inode, inode->i_size &
*/
first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
- node = rb_first(&block_group->free_space_offset);
- if (!node)
- goto out_free;
-
/*
* Lock all pages first so we can lock the extent safely.
*
add_async_extent(async_cow, start, num_bytes,
total_compressed, pages, nr_pages_ret);
- if (start + num_bytes < end && start + num_bytes < actual_end) {
+ if (start + num_bytes < end) {
start += num_bytes;
pages = NULL;
cond_resched();
BTRFS_I(inode)->index_cnt = 2;
BTRFS_I(inode)->root = root;
BTRFS_I(inode)->generation = trans->transid;
+ inode->i_generation = BTRFS_I(inode)->generation;
btrfs_set_inode_space_info(root, inode);
if (mode & S_IFDIR)
}
static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
- struct dentry *dentry, struct inode *inode,
- int backref, u64 index)
+ struct inode *dir, struct dentry *dentry,
+ struct inode *inode, int backref, u64 index)
{
- int err = btrfs_add_link(trans, dentry->d_parent->d_inode,
- inode, dentry->d_name.name,
- dentry->d_name.len, backref, index);
+ int err = btrfs_add_link(trans, dir, inode,
+ dentry->d_name.name, dentry->d_name.len,
+ backref, index);
if (!err) {
d_instantiate(dentry, inode);
return 0;
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino, objectid,
+ dentry->d_name.len, dir->i_ino, objectid,
BTRFS_I(dir)->block_group, mode, &index);
err = PTR_ERR(inode);
if (IS_ERR(inode))
}
btrfs_set_trans_block_group(trans, inode);
- err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino,
- objectid, BTRFS_I(dir)->block_group, mode,
- &index);
+ dentry->d_name.len, dir->i_ino, objectid,
+ BTRFS_I(dir)->block_group, mode, &index);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_unlock;
}
btrfs_set_trans_block_group(trans, inode);
- err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
return -EPERM;
btrfs_inc_nlink(inode);
+ inode->i_ctime = CURRENT_TIME;
err = btrfs_set_inode_index(dir, &index);
if (err)
btrfs_set_trans_block_group(trans, dir);
ihold(inode);
- err = btrfs_add_nondir(trans, dentry, inode, 1, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 1, index);
if (err) {
drop_inode = 1;
} else {
+ struct dentry *parent = dget_parent(dentry);
btrfs_update_inode_block_group(trans, dir);
err = btrfs_update_inode(trans, root, inode);
BUG_ON(err);
- btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
+ btrfs_log_new_name(trans, inode, NULL, parent);
+ dput(parent);
}
nr = trans->blocks_used;
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino, objectid,
+ dentry->d_name.len, dir->i_ino, objectid,
BTRFS_I(dir)->block_group, S_IFDIR | mode,
&index);
if (IS_ERR(inode)) {
if (err)
goto out_fail;
- err = btrfs_add_link(trans, dentry->d_parent->d_inode,
- inode, dentry->d_name.name,
- dentry->d_name.len, 0, index);
+ err = btrfs_add_link(trans, dir, inode, dentry->d_name.name,
+ dentry->d_name.len, 0, index);
if (err)
goto out_fail;
u64 bytes;
u32 *csums;
void *private;
+
+ /* number of bios pending for this dio */
+ atomic_t pending_bios;
+
+ /* IO errors */
+ int errors;
+
+ struct bio *orig_bio;
};
static void btrfs_endio_direct_read(struct bio *bio, int err)
{
+ struct btrfs_dio_private *dip = bio->bi_private;
struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1;
struct bio_vec *bvec = bio->bi_io_vec;
- struct btrfs_dio_private *dip = bio->bi_private;
struct inode *inode = dip->inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 start;
struct btrfs_trans_handle *trans;
struct btrfs_ordered_extent *ordered = NULL;
struct extent_state *cached_state = NULL;
+ u64 ordered_offset = dip->logical_offset;
+ u64 ordered_bytes = dip->bytes;
int ret;
if (err)
goto out_done;
-
- ret = btrfs_dec_test_ordered_pending(inode, &ordered,
- dip->logical_offset, dip->bytes);
+again:
+ ret = btrfs_dec_test_first_ordered_pending(inode, &ordered,
+ &ordered_offset,
+ ordered_bytes);
if (!ret)
- goto out_done;
+ goto out_test;
BUG_ON(!ordered);
out:
btrfs_delalloc_release_metadata(inode, ordered->len);
btrfs_end_transaction(trans, root);
+ ordered_offset = ordered->file_offset + ordered->len;
btrfs_put_ordered_extent(ordered);
btrfs_put_ordered_extent(ordered);
+
+out_test:
+ /*
+ * our bio might span multiple ordered extents. If we haven't
+ * completed the accounting for the whole dio, go back and try again
+ */
+ if (ordered_offset < dip->logical_offset + dip->bytes) {
+ ordered_bytes = dip->logical_offset + dip->bytes -
+ ordered_offset;
+ goto again;
+ }
out_done:
bio->bi_private = dip->private;
return 0;
}
+static void btrfs_end_dio_bio(struct bio *bio, int err)
+{
+ struct btrfs_dio_private *dip = bio->bi_private;
+
+ if (err) {
+ printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu "
+ "sector %#Lx len %u err no %d\n",
+ dip->inode->i_ino, bio->bi_rw,
+ (unsigned long long)bio->bi_sector, bio->bi_size, err);
+ dip->errors = 1;
+
+ /*
+ * before atomic variable goto zero, we must make sure
+ * dip->errors is perceived to be set.
+ */
+ smp_mb__before_atomic_dec();
+ }
+
+ /* if there are more bios still pending for this dio, just exit */
+ if (!atomic_dec_and_test(&dip->pending_bios))
+ goto out;
+
+ if (dip->errors)
+ bio_io_error(dip->orig_bio);
+ else {
+ set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags);
+ bio_endio(dip->orig_bio, 0);
+ }
+out:
+ bio_put(bio);
+}
+
+static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev,
+ u64 first_sector, gfp_t gfp_flags)
+{
+ int nr_vecs = bio_get_nr_vecs(bdev);
+ return btrfs_bio_alloc(bdev, first_sector, nr_vecs, gfp_flags);
+}
+
+static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
+ int rw, u64 file_offset, int skip_sum,
+ u32 *csums)
+{
+ int write = rw & REQ_WRITE;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ int ret;
+
+ bio_get(bio);
+ ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
+ if (ret)
+ goto err;
+
+ if (write && !skip_sum) {
+ ret = btrfs_wq_submit_bio(root->fs_info,
+ inode, rw, bio, 0, 0,
+ file_offset,
+ __btrfs_submit_bio_start_direct_io,
+ __btrfs_submit_bio_done);
+ goto err;
+ } else if (!skip_sum)
+ btrfs_lookup_bio_sums_dio(root, inode, bio,
+ file_offset, csums);
+
+ ret = btrfs_map_bio(root, rw, bio, 0, 1);
+err:
+ bio_put(bio);
+ return ret;
+}
+
+static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
+ int skip_sum)
+{
+ struct inode *inode = dip->inode;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree;
+ struct bio *bio;
+ struct bio *orig_bio = dip->orig_bio;
+ struct bio_vec *bvec = orig_bio->bi_io_vec;
+ u64 start_sector = orig_bio->bi_sector;
+ u64 file_offset = dip->logical_offset;
+ u64 submit_len = 0;
+ u64 map_length;
+ int nr_pages = 0;
+ u32 *csums = dip->csums;
+ int ret = 0;
+
+ bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
+ if (!bio)
+ return -ENOMEM;
+ bio->bi_private = dip;
+ bio->bi_end_io = btrfs_end_dio_bio;
+ atomic_inc(&dip->pending_bios);
+
+ map_length = orig_bio->bi_size;
+ ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+ &map_length, NULL, 0);
+ if (ret) {
+ bio_put(bio);
+ return -EIO;
+ }
+
+ while (bvec <= (orig_bio->bi_io_vec + orig_bio->bi_vcnt - 1)) {
+ if (unlikely(map_length < submit_len + bvec->bv_len ||
+ bio_add_page(bio, bvec->bv_page, bvec->bv_len,
+ bvec->bv_offset) < bvec->bv_len)) {
+ /*
+ * inc the count before we submit the bio so
+ * we know the end IO handler won't happen before
+ * we inc the count. Otherwise, the dip might get freed
+ * before we're done setting it up
+ */
+ atomic_inc(&dip->pending_bios);
+ ret = __btrfs_submit_dio_bio(bio, inode, rw,
+ file_offset, skip_sum,
+ csums);
+ if (ret) {
+ bio_put(bio);
+ atomic_dec(&dip->pending_bios);
+ goto out_err;
+ }
+
+ if (!skip_sum)
+ csums = csums + nr_pages;
+ start_sector += submit_len >> 9;
+ file_offset += submit_len;
+
+ submit_len = 0;
+ nr_pages = 0;
+
+ bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev,
+ start_sector, GFP_NOFS);
+ if (!bio)
+ goto out_err;
+ bio->bi_private = dip;
+ bio->bi_end_io = btrfs_end_dio_bio;
+
+ map_length = orig_bio->bi_size;
+ ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+ &map_length, NULL, 0);
+ if (ret) {
+ bio_put(bio);
+ goto out_err;
+ }
+ } else {
+ submit_len += bvec->bv_len;
+ nr_pages ++;
+ bvec++;
+ }
+ }
+
+ ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum,
+ csums);
+ if (!ret)
+ return 0;
+
+ bio_put(bio);
+out_err:
+ dip->errors = 1;
+ /*
+ * before atomic variable goto zero, we must
+ * make sure dip->errors is perceived to be set.
+ */
+ smp_mb__before_atomic_dec();
+ if (atomic_dec_and_test(&dip->pending_bios))
+ bio_io_error(dip->orig_bio);
+
+ /* bio_end_io() will handle error, so we needn't return it */
+ return 0;
+}
+
static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
loff_t file_offset)
{
dip->disk_bytenr = (u64)bio->bi_sector << 9;
bio->bi_private = dip;
+ dip->errors = 0;
+ dip->orig_bio = bio;
+ atomic_set(&dip->pending_bios, 0);
if (write)
bio->bi_end_io = btrfs_endio_direct_write;
else
bio->bi_end_io = btrfs_endio_direct_read;
- ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
- if (ret)
- goto out_err;
-
- if (write && !skip_sum) {
- ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
- inode, rw, bio, 0, 0,
- dip->logical_offset,
- __btrfs_submit_bio_start_direct_io,
- __btrfs_submit_bio_done);
- if (ret)
- goto out_err;
+ ret = btrfs_submit_direct_hook(rw, dip, skip_sum);
+ if (!ret)
return;
- } else if (!skip_sum)
- btrfs_lookup_bio_sums_dio(root, inode, bio,
- dip->logical_offset, dip->csums);
-
- ret = btrfs_map_bio(root, rw, bio, 0, 1);
- if (ret)
- goto out_err;
- return;
-out_err:
- kfree(dip->csums);
- kfree(dip);
free_ordered:
/*
* If this is a write, we need to clean up the reserved space and kill
*/
if (write) {
struct btrfs_ordered_extent *ordered;
- ordered = btrfs_lookup_ordered_extent(inode,
- dip->logical_offset);
+ ordered = btrfs_lookup_ordered_extent(inode, file_offset);
if (!test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags) &&
!test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags))
btrfs_free_reserved_extent(root, ordered->start,
BUG_ON(ret);
if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
- btrfs_log_new_name(trans, old_inode, old_dir,
- new_dentry->d_parent);
+ struct dentry *parent = dget_parent(new_dentry);
+ btrfs_log_new_name(trans, old_inode, old_dir, parent);
+ dput(parent);
btrfs_end_log_trans(root);
}
out_fail:
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino, objectid,
+ dentry->d_name.len, dir->i_ino, objectid,
BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO,
&index);
err = PTR_ERR(inode);
}
btrfs_set_trans_block_group(trans, inode);
- err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 cur_offset = start;
+ u64 i_size;
int ret = 0;
bool own_trans = true;
(actual_len > inode->i_size) &&
(cur_offset > inode->i_size)) {
if (cur_offset > actual_len)
- i_size_write(inode, actual_len);
+ i_size = actual_len;
else
- i_size_write(inode, cur_offset);
- i_size_write(inode, cur_offset);
- btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+ i_size = cur_offset;
+ i_size_write(inode, i_size);
+ btrfs_ordered_update_i_size(inode, i_size, NULL);
}
ret = btrfs_update_inode(trans, root, inode);
btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
mutex_lock(&inode->i_mutex);
+ ret = inode_newsize_ok(inode, alloc_end);
+ if (ret)
+ goto out;
+
if (alloc_start > inode->i_size) {
ret = btrfs_cont_expand(inode, alloc_start);
if (ret)
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .getattr = btrfs_getattr,
.permission = btrfs_permission,
.setxattr = btrfs_setxattr,
.getxattr = btrfs_getxattr,
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
struct btrfs_root *new_root;
- struct inode *dir = dentry->d_parent->d_inode;
+ struct dentry *parent = dget_parent(dentry);
+ struct inode *dir;
int ret;
int err;
u64 objectid;
ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root,
0, &objectid);
- if (ret)
+ if (ret) {
+ dput(parent);
return ret;
+ }
+
+ dir = parent->d_inode;
+
/*
* 1 - inode item
* 2 - refs
* 2 - dir items
*/
trans = btrfs_start_transaction(root, 6);
- if (IS_ERR(trans))
+ if (IS_ERR(trans)) {
+ dput(parent);
return PTR_ERR(trans);
+ }
leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
0, objectid, NULL, 0, 0, 0);
d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
fail:
+ dput(parent);
if (async_transid) {
*async_transid = trans->transid;
err = btrfs_commit_transaction_async(trans, root, 1);
char *name, int namelen, u64 *async_transid)
{
struct inode *inode;
+ struct dentry *parent;
struct btrfs_pending_snapshot *pending_snapshot;
struct btrfs_trans_handle *trans;
int ret;
btrfs_orphan_cleanup(pending_snapshot->snap);
- inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry);
+ parent = dget_parent(dentry);
+ inode = btrfs_lookup_dentry(parent->d_inode, dentry);
+ dput(parent);
if (IS_ERR(inode)) {
ret = PTR_ERR(inode);
goto fail;
static noinline int btrfs_ioctl_snap_create(struct file *file,
void __user *arg, int subvol,
- int async)
+ int v2)
{
struct btrfs_ioctl_vol_args *vol_args = NULL;
- struct btrfs_ioctl_async_vol_args *async_vol_args = NULL;
+ struct btrfs_ioctl_vol_args_v2 *vol_args_v2 = NULL;
char *name;
u64 fd;
- u64 transid = 0;
int ret;
- if (async) {
- async_vol_args = memdup_user(arg, sizeof(*async_vol_args));
- if (IS_ERR(async_vol_args))
- return PTR_ERR(async_vol_args);
+ if (v2) {
+ u64 transid = 0;
+ u64 *ptr = NULL;
+
+ vol_args_v2 = memdup_user(arg, sizeof(*vol_args_v2));
+ if (IS_ERR(vol_args_v2))
+ return PTR_ERR(vol_args_v2);
+
+ if (vol_args_v2->flags & ~BTRFS_SUBVOL_CREATE_ASYNC) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ name = vol_args_v2->name;
+ fd = vol_args_v2->fd;
+ vol_args_v2->name[BTRFS_SUBVOL_NAME_MAX] = '\0';
+
+ if (vol_args_v2->flags & BTRFS_SUBVOL_CREATE_ASYNC)
+ ptr = &transid;
+
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, ptr);
- name = async_vol_args->name;
- fd = async_vol_args->fd;
- async_vol_args->name[BTRFS_SNAPSHOT_NAME_MAX] = '\0';
+ if (ret == 0 && ptr &&
+ copy_to_user(arg +
+ offsetof(struct btrfs_ioctl_vol_args_v2,
+ transid), ptr, sizeof(*ptr)))
+ ret = -EFAULT;
} else {
vol_args = memdup_user(arg, sizeof(*vol_args));
if (IS_ERR(vol_args))
name = vol_args->name;
fd = vol_args->fd;
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
- }
-
- ret = btrfs_ioctl_snap_create_transid(file, name, fd,
- subvol, &transid);
- if (!ret && async) {
- if (copy_to_user(arg +
- offsetof(struct btrfs_ioctl_async_vol_args,
- transid), &transid, sizeof(transid)))
- return -EFAULT;
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, NULL);
}
-
+out:
kfree(vol_args);
- kfree(async_vol_args);
+ kfree(vol_args_v2);
return ret;
}
olen = len = src->i_size - off;
/* if we extend to eof, continue to block boundary */
if (off + len == src->i_size)
- len = ((src->i_size + bs-1) & ~(bs-1))
- - off;
+ len = ALIGN(src->i_size, bs) - off;
/* verify the end result is block aligned */
- if ((off & (bs-1)) ||
- ((off + len) & (bs-1)))
+ if (!IS_ALIGNED(off, bs) || !IS_ALIGNED(off + len, bs) ||
+ !IS_ALIGNED(destoff, bs))
goto out_unlock;
/* do any pending delalloc/csum calc on src, one way or
* but shouldn't round up the file size
*/
endoff = new_key.offset + datal;
- if (endoff > off+olen)
- endoff = off+olen;
+ if (endoff > destoff+olen)
+ endoff = destoff+olen;
if (endoff > inode->i_size)
btrfs_i_size_write(inode, endoff);
return btrfs_ioctl_getversion(file, argp);
case BTRFS_IOC_SNAP_CREATE:
return btrfs_ioctl_snap_create(file, argp, 0, 0);
- case BTRFS_IOC_SNAP_CREATE_ASYNC:
+ case BTRFS_IOC_SNAP_CREATE_V2:
return btrfs_ioctl_snap_create(file, argp, 0, 1);
case BTRFS_IOC_SUBVOL_CREATE:
return btrfs_ioctl_snap_create(file, argp, 1, 0);
char name[BTRFS_PATH_NAME_MAX + 1];
};
-#define BTRFS_SNAPSHOT_NAME_MAX 4079
-struct btrfs_ioctl_async_vol_args {
+#define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0)
+
+#define BTRFS_SUBVOL_NAME_MAX 4039
+struct btrfs_ioctl_vol_args_v2 {
__s64 fd;
__u64 transid;
- char name[BTRFS_SNAPSHOT_NAME_MAX + 1];
+ __u64 flags;
+ __u64 unused[4];
+ char name[BTRFS_SUBVOL_NAME_MAX + 1];
};
#define BTRFS_INO_LOOKUP_PATH_MAX 4080
struct btrfs_ioctl_space_args)
#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
-#define BTRFS_IOC_SNAP_CREATE_ASYNC _IOW(BTRFS_IOCTL_MAGIC, 23, \
- struct btrfs_ioctl_async_vol_args)
+#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
+ struct btrfs_ioctl_vol_args_v2)
#endif
return 0;
}
+/*
+ * this is used to account for finished IO across a given range
+ * of the file. The IO may span ordered extents. If
+ * a given ordered_extent is completely done, 1 is returned, otherwise
+ * 0.
+ *
+ * test_and_set_bit on a flag in the struct btrfs_ordered_extent is used
+ * to make sure this function only returns 1 once for a given ordered extent.
+ *
+ * file_offset is updated to one byte past the range that is recorded as
+ * complete. This allows you to walk forward in the file.
+ */
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+ struct btrfs_ordered_extent **cached,
+ u64 *file_offset, u64 io_size)
+{
+ struct btrfs_ordered_inode_tree *tree;
+ struct rb_node *node;
+ struct btrfs_ordered_extent *entry = NULL;
+ int ret;
+ u64 dec_end;
+ u64 dec_start;
+ u64 to_dec;
+
+ tree = &BTRFS_I(inode)->ordered_tree;
+ spin_lock(&tree->lock);
+ node = tree_search(tree, *file_offset);
+ if (!node) {
+ ret = 1;
+ goto out;
+ }
+
+ entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
+ if (!offset_in_entry(entry, *file_offset)) {
+ ret = 1;
+ goto out;
+ }
+
+ dec_start = max(*file_offset, entry->file_offset);
+ dec_end = min(*file_offset + io_size, entry->file_offset +
+ entry->len);
+ *file_offset = dec_end;
+ if (dec_start > dec_end) {
+ printk(KERN_CRIT "bad ordering dec_start %llu end %llu\n",
+ (unsigned long long)dec_start,
+ (unsigned long long)dec_end);
+ }
+ to_dec = dec_end - dec_start;
+ if (to_dec > entry->bytes_left) {
+ printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n",
+ (unsigned long long)entry->bytes_left,
+ (unsigned long long)to_dec);
+ }
+ entry->bytes_left -= to_dec;
+ if (entry->bytes_left == 0)
+ ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
+ else
+ ret = 1;
+out:
+ if (!ret && cached && entry) {
+ *cached = entry;
+ atomic_inc(&entry->refs);
+ }
+ spin_unlock(&tree->lock);
+ return ret == 0;
+}
+
/*
* this is used to account for finished IO across a given range
* of the file. The IO should not span ordered extents. If
int btrfs_dec_test_ordered_pending(struct inode *inode,
struct btrfs_ordered_extent **cached,
u64 file_offset, u64 io_size);
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+ struct btrfs_ordered_extent **cached,
+ u64 *file_offset, u64 io_size);
int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
u64 start, u64 len, u64 disk_len, int type);
int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
return -ENOMEM;
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
- if (ret)
+ if (ret < 0)
goto out;
+ if (ret) {
+ ret = -ENOENT;
+ goto out;
+ }
ret = btrfs_del_item(trans, root, path);
case Opt_space_cache:
printk(KERN_INFO "btrfs: enabling disk space caching\n");
btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+ break;
case Opt_clear_cache:
printk(KERN_INFO "btrfs: force clearing of disk cache\n");
btrfs_set_opt(info->mount_opt, CLEAR_CACHE);
static int btrfs_test_super(struct super_block *s, void *data)
{
- struct btrfs_fs_devices *test_fs_devices = data;
+ struct btrfs_root *test_root = data;
struct btrfs_root *root = btrfs_sb(s);
- return root->fs_info->fs_devices == test_fs_devices;
+ /*
+ * If this super block is going away, return false as it
+ * can't match as an existing super block.
+ */
+ if (!atomic_read(&s->s_active))
+ return 0;
+ return root->fs_info->fs_devices == test_root->fs_info->fs_devices;
+}
+
+static int btrfs_set_super(struct super_block *s, void *data)
+{
+ s->s_fs_info = data;
+
+ return set_anon_super(s, data);
}
+
/*
* Find a superblock for the given device / mount point.
*
struct super_block *s;
struct dentry *root;
struct btrfs_fs_devices *fs_devices = NULL;
+ struct btrfs_root *tree_root = NULL;
+ struct btrfs_fs_info *fs_info = NULL;
fmode_t mode = FMODE_READ;
char *subvol_name = NULL;
u64 subvol_objectid = 0;
goto error_close_devices;
}
+ /*
+ * Setup a dummy root and fs_info for test/set super. This is because
+ * we don't actually fill this stuff out until open_ctree, but we need
+ * it for searching for existing supers, so this lets us do that and
+ * then open_ctree will properly initialize everything later.
+ */
+ fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
+ tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ if (!fs_info || !tree_root) {
+ error = -ENOMEM;
+ goto error_close_devices;
+ }
+ fs_info->tree_root = tree_root;
+ fs_info->fs_devices = fs_devices;
+ tree_root->fs_info = fs_info;
+
bdev = fs_devices->latest_bdev;
- s = sget(fs_type, btrfs_test_super, set_anon_super, fs_devices);
+ s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
if (IS_ERR(s))
goto error_s;
mutex_unlock(&root->d_inode->i_mutex);
if (IS_ERR(new_root)) {
+ dput(root);
deactivate_locked_super(s);
error = PTR_ERR(new_root);
- dput(root);
goto error_free_subvol_name;
}
if (!new_root->d_inode) {
error = PTR_ERR(s);
error_close_devices:
btrfs_close_devices(fs_devices);
+ kfree(fs_info);
+ kfree(tree_root);
error_free_subvol_name:
kfree(subvol_name);
return ERR_PTR(error);
struct btrfs_root *root = pending->root;
struct btrfs_root *parent_root;
struct inode *parent_inode;
+ struct dentry *parent;
struct dentry *dentry;
struct extent_buffer *tmp;
struct extent_buffer *old;
trans->block_rsv = &pending->block_rsv;
dentry = pending->dentry;
- parent_inode = dentry->d_parent->d_inode;
+ parent = dget_parent(dentry);
+ parent_inode = parent->d_inode;
parent_root = BTRFS_I(parent_inode)->root;
record_root_in_trans(trans, parent_root);
parent_inode->i_ino, index,
dentry->d_name.name, dentry->d_name.len);
BUG_ON(ret);
+ dput(parent);
key.offset = (u64)-1;
pending->snap = btrfs_read_fs_root_no_name(root->fs_info, &key);
{
int ret = 0;
struct btrfs_root *root;
+ struct dentry *old_parent = NULL;
/*
* for regular files, if its inode is already on disk, we don't
if (IS_ROOT(parent))
break;
- parent = parent->d_parent;
+ parent = dget_parent(parent);
+ dput(old_parent);
+ old_parent = parent;
inode = parent->d_inode;
}
+ dput(old_parent);
out:
return ret;
}
{
int inode_only = exists_only ? LOG_INODE_EXISTS : LOG_INODE_ALL;
struct super_block *sb;
+ struct dentry *old_parent = NULL;
int ret = 0;
u64 last_committed = root->fs_info->last_trans_committed;
if (IS_ROOT(parent))
break;
- parent = parent->d_parent;
+ parent = dget_parent(parent);
+ dput(old_parent);
+ old_parent = parent;
}
ret = 0;
end_trans:
+ dput(old_parent);
if (ret < 0) {
BUG_ON(ret != -ENOSPC);
root->fs_info->last_trans_log_full_commit = trans->transid;
int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct dentry *dentry)
{
- return btrfs_log_inode_parent(trans, root, dentry->d_inode,
- dentry->d_parent, 0);
+ struct dentry *parent = dget_parent(dentry);
+ int ret;
+
+ ret = btrfs_log_inode_parent(trans, root, dentry->d_inode, parent, 0);
+ dput(parent);
+
+ return ret;
}
/*
device->fs_devices = fs_devices;
fs_devices->num_devices++;
- } else if (strcmp(device->name, path)) {
+ } else if (!device->name || strcmp(device->name, path)) {
name = kstrdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
kfree(device->name);
device->name = name;
+ if (device->missing) {
+ fs_devices->missing_devices--;
+ device->missing = 0;
+ }
}
if (found_transid > fs_devices->latest_trans) {
device->fs_devices->num_devices--;
+ if (device->missing)
+ root->fs_info->fs_devices->missing_devices--;
+
next_device = list_entry(root->fs_info->fs_devices->devices.next,
struct btrfs_device, dev_list);
if (device->bdev == root->fs_info->sb->s_bdev)
device->devid = devid;
device->work.func = pending_bios_fn;
device->fs_devices = fs_devices;
+ device->missing = 1;
fs_devices->num_devices++;
+ fs_devices->missing_devices++;
spin_lock_init(&device->io_lock);
INIT_LIST_HEAD(&device->dev_alloc_list);
memcpy(device->uuid, dev_uuid, BTRFS_UUID_SIZE);
device = add_missing_dev(root, devid, dev_uuid);
if (!device)
return -ENOMEM;
+ } else if (!device->missing) {
+ /*
+ * this happens when a device that was properly setup
+ * in the device info lists suddenly goes bad.
+ * device->bdev is NULL, and so we have to set
+ * device->missing to one here
+ */
+ root->fs_info->fs_devices->missing_devices++;
+ device->missing = 1;
}
}
int writeable;
int in_fs_metadata;
+ int missing;
spinlock_t io_lock;
u64 num_devices;
u64 open_devices;
u64 rw_devices;
+ u64 missing_devices;
u64 total_rw_bytes;
struct block_device *latest_bdev;
err = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
page->index << PAGE_CACHE_SHIFT, &len,
ci->i_truncate_seq, ci->i_truncate_size,
- &page, 1);
+ &page, 1, 0);
if (err == -ENOENT)
err = 0;
if (err < 0) {
rc = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
offset, &len,
ci->i_truncate_seq, ci->i_truncate_size,
- pages, nr_pages);
+ pages, nr_pages, 0);
if (rc == -ENOENT)
rc = 0;
if (rc < 0)
snapc, do_sync,
ci->i_truncate_seq,
ci->i_truncate_size,
- &inode->i_mtime, true, 1);
+ &inode->i_mtime, true, 1, 0);
max_pages = req->r_num_pages;
alloc_page_vec(fsc, req);
invalidating_gen == ci->i_rdcache_gen) {
/* success. */
dout("try_nonblocking_invalidate %p success\n", inode);
- ci->i_rdcache_gen = 0;
- ci->i_rdcache_revoking = 0;
+ /* save any racing async invalidate some trouble */
+ ci->i_rdcache_revoking = ci->i_rdcache_gen - 1;
return 0;
}
dout("try_nonblocking_invalidate %p failed\n", inode);
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
- unsigned seq = le32_to_cpu(grant->seq);
- unsigned issue_seq = le32_to_cpu(grant->issue_seq);
+ int seq = le32_to_cpu(grant->seq);
int newcaps = le32_to_cpu(grant->caps);
int issued, implemented, used, wanted, dirty;
u64 size = le64_to_cpu(grant->size);
int revoked_rdcache = 0;
int queue_invalidate = 0;
- dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
- inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
+ dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
+ inode, cap, mds, seq, ceph_cap_string(newcaps));
dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
inode->i_size);
}
cap->seq = seq;
- cap->issue_seq = issue_seq;
/* file layout may have changed */
ci->i_layout = grant->layout;
NULL /* no caps context */);
try_flush_caps(inode, session, NULL);
up_read(&mdsc->snap_rwsem);
+
+ /* make sure we re-request max_size, if necessary */
+ spin_lock(&inode->i_lock);
+ ci->i_requested_max_size = 0;
+ spin_unlock(&inode->i_lock);
}
/*
if (dentry->d_fsdata)
return 0;
- if (ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
+ if (dentry->d_parent == NULL || /* nfs fh_to_dentry */
+ ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
dentry->d_op = &ceph_dentry_ops;
else if (ceph_snap(dentry->d_parent->d_inode) == CEPH_SNAPDIR)
dentry->d_op = &ceph_snapdir_dentry_ops;
spin_lock(&dcache_lock);
/* start at beginning? */
- if (filp->f_pos == 2 || (last &&
- filp->f_pos < ceph_dentry(last)->offset)) {
+ if (filp->f_pos == 2 || last == NULL ||
+ filp->f_pos < ceph_dentry(last)->offset) {
if (list_empty(&parent->d_subdirs))
goto out_unlock;
p = parent->d_subdirs.prev;
if (req->r_reply_info.dir_end) {
kfree(fi->last_name);
fi->last_name = NULL;
- fi->next_offset = 2;
+ if (ceph_frag_is_rightmost(frag))
+ fi->next_offset = 2;
+ else
+ fi->next_offset = 0;
} else {
rinfo = &req->r_reply_info;
err = note_last_dentry(fi,
u64 pos = ceph_make_fpos(frag, off);
struct ceph_mds_reply_inode *in =
rinfo->dir_in[off - fi->offset].in;
+ struct ceph_vino vino;
+ ino_t ino;
+
dout("readdir off %d (%d/%d) -> %lld '%.*s' %p\n",
off, off - fi->offset, rinfo->dir_nr, pos,
rinfo->dir_dname_len[off - fi->offset],
rinfo->dir_dname[off - fi->offset], in);
BUG_ON(!in);
ftype = le32_to_cpu(in->mode) >> 12;
+ vino.ino = le64_to_cpu(in->ino);
+ vino.snap = le64_to_cpu(in->snapid);
+ ino = ceph_vino_to_ino(vino);
if (filldir(dirent,
rinfo->dir_dname[off - fi->offset],
rinfo->dir_dname_len[off - fi->offset],
- pos,
- le64_to_cpu(in->ino),
- ftype) < 0) {
+ pos, ino, ftype) < 0) {
dout("filldir stopping us...\n");
return 0;
}
fi->last_readdir = NULL;
}
kfree(fi->last_name);
+ fi->last_name = NULL;
fi->next_offset = 2; /* compensate for . and .. */
if (fi->dentry) {
dput(fi->dentry);
}
/*
- * No need to block if we have any caps. Update wanted set
+ * No need to block if we have caps on the auth MDS (for
+ * write) or any MDS (for read). Update wanted set
* asynchronously.
*/
spin_lock(&inode->i_lock);
- if (__ceph_is_any_real_caps(ci)) {
+ if (__ceph_is_any_real_caps(ci) &&
+ (((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) {
int mds_wanted = __ceph_caps_mds_wanted(ci);
int issued = __ceph_caps_issued(ci, NULL);
static int striped_read(struct inode *inode,
u64 off, u64 len,
struct page **pages, int num_pages,
- int *checkeof)
+ int *checkeof, bool align_to_pages,
+ unsigned long buf_align)
{
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_inode_info *ci = ceph_inode(inode);
u64 pos, this_len;
+ int io_align, page_align;
int page_off = off & ~PAGE_CACHE_MASK; /* first byte's offset in page */
int left, pages_left;
int read;
page_pos = pages;
pages_left = num_pages;
read = 0;
+ io_align = off & ~PAGE_MASK;
more:
+ if (align_to_pages)
+ page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
+ else
+ page_align = pos & ~PAGE_MASK;
this_len = left;
ret = ceph_osdc_readpages(&fsc->client->osdc, ceph_vino(inode),
&ci->i_layout, pos, &this_len,
ci->i_truncate_seq,
ci->i_truncate_size,
- page_pos, pages_left);
+ page_pos, pages_left, page_align);
hit_stripe = this_len < left;
was_short = ret >= 0 && ret < this_len;
if (ret == -ENOENT)
struct inode *inode = file->f_dentry->d_inode;
struct page **pages;
u64 off = *poff;
- int num_pages = calc_pages_for(off, len);
- int ret;
+ int num_pages, ret;
dout("sync_read on file %p %llu~%u %s\n", file, off, len,
(file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
if (file->f_flags & O_DIRECT) {
- pages = ceph_get_direct_page_vector(data, num_pages, off, len);
-
- /*
- * flush any page cache pages in this range. this
- * will make concurrent normal and O_DIRECT io slow,
- * but it will at least behave sensibly when they are
- * in sequence.
- */
+ num_pages = calc_pages_for((unsigned long)data, len);
+ pages = ceph_get_direct_page_vector(data, num_pages, true);
} else {
+ num_pages = calc_pages_for(off, len);
pages = ceph_alloc_page_vector(num_pages, GFP_NOFS);
}
if (IS_ERR(pages))
return PTR_ERR(pages);
+ /*
+ * flush any page cache pages in this range. this
+ * will make concurrent normal and sync io slow,
+ * but it will at least behave sensibly when they are
+ * in sequence.
+ */
ret = filemap_write_and_wait(inode->i_mapping);
if (ret < 0)
goto done;
- ret = striped_read(inode, off, len, pages, num_pages, checkeof);
+ ret = striped_read(inode, off, len, pages, num_pages, checkeof,
+ file->f_flags & O_DIRECT,
+ (unsigned long)data & ~PAGE_MASK);
if (ret >= 0 && (file->f_flags & O_DIRECT) == 0)
ret = ceph_copy_page_vector_to_user(pages, data, off, ret);
done:
if (file->f_flags & O_DIRECT)
- ceph_put_page_vector(pages, num_pages);
+ ceph_put_page_vector(pages, num_pages, true);
else
ceph_release_page_vector(pages, num_pages);
dout("sync_read result %d\n", ret);
int flags;
int do_sync = 0;
int check_caps = 0;
+ int page_align, io_align;
+ unsigned long buf_align;
int ret;
struct timespec mtime = CURRENT_TIME;
else
pos = *offset;
+ io_align = pos & ~PAGE_MASK;
+ buf_align = (unsigned long)data & ~PAGE_MASK;
+
ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left);
if (ret < 0)
return ret;
*/
more:
len = left;
+ if (file->f_flags & O_DIRECT) {
+ /* write from beginning of first page, regardless of
+ io alignment */
+ page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
+ num_pages = calc_pages_for((unsigned long)data, len);
+ } else {
+ page_align = pos & ~PAGE_MASK;
+ num_pages = calc_pages_for(pos, len);
+ }
req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
ceph_vino(inode), pos, &len,
CEPH_OSD_OP_WRITE, flags,
ci->i_snap_realm->cached_context,
do_sync,
ci->i_truncate_seq, ci->i_truncate_size,
- &mtime, false, 2);
+ &mtime, false, 2, page_align);
if (!req)
return -ENOMEM;
- num_pages = calc_pages_for(pos, len);
-
if (file->f_flags & O_DIRECT) {
- pages = ceph_get_direct_page_vector(data, num_pages, pos, len);
+ pages = ceph_get_direct_page_vector(data, num_pages, false);
if (IS_ERR(pages)) {
ret = PTR_ERR(pages);
goto out;
}
if (file->f_flags & O_DIRECT)
- ceph_put_page_vector(pages, num_pages);
+ ceph_put_page_vector(pages, num_pages, false);
else if (file->f_flags & O_SYNC)
ceph_release_page_vector(pages, num_pages);
#include <linux/module.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
if (issued & (CEPH_CAP_FILE_EXCL|
CEPH_CAP_FILE_WR|
- CEPH_CAP_FILE_BUFFER)) {
+ CEPH_CAP_FILE_BUFFER|
+ CEPH_CAP_AUTH_EXCL|
+ CEPH_CAP_XATTR_EXCL)) {
if (timespec_compare(ctime, &inode->i_ctime) > 0) {
dout("ctime %ld.%09ld -> %ld.%09ld inc w/ cap\n",
inode->i_ctime.tv_sec, inode->i_ctime.tv_nsec,
warn = 1;
}
} else {
- /* we have no write caps; whatever the MDS says is true */
+ /* we have no write|excl caps; whatever the MDS says is true */
if (ceph_seq_cmp(time_warp_seq, ci->i_time_warp_seq) >= 0) {
inode->i_ctime = *ctime;
inode->i_mtime = *mtime;
/*
* provided version will be odd if inode value is projected,
- * even if stable. skip the update if we have a newer info
- * (e.g., due to inode info racing form multiple MDSs), or if
- * we are getting projected (unstable) inode info.
+ * even if stable. skip the update if we have newer stable
+ * info (ours>=theirs, e.g. due to racing mds replies), unless
+ * we are getting projected (unstable) info (in which case the
+ * version is odd, and we want ours>theirs).
+ * us them
+ * 2 2 skip
+ * 3 2 skip
+ * 3 3 update
*/
if (le64_to_cpu(info->version) > 0 &&
- (ci->i_version & ~1) > le64_to_cpu(info->version))
+ (ci->i_version & ~1) >= le64_to_cpu(info->version))
goto no_change;
issued = __ceph_caps_issued(ci, &implemented);
le32_to_cpu(info->time_warp_seq),
&ctime, &mtime, &atime);
- ci->i_max_size = le64_to_cpu(info->max_size);
+ /* only update max_size on auth cap */
+ if ((info->cap.flags & CEPH_CAP_FLAG_AUTH) &&
+ ci->i_max_size != le64_to_cpu(info->max_size)) {
+ dout("max_size %lld -> %llu\n", ci->i_max_size,
+ le64_to_cpu(info->max_size));
+ ci->i_max_size = le64_to_cpu(info->max_size);
+ }
+
ci->i_layout = info->layout;
inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
ininfo = rinfo->targeti.in;
vino.ino = le64_to_cpu(ininfo->ino);
vino.snap = le64_to_cpu(ininfo->snapid);
- if (!dn->d_inode) {
+ in = dn->d_inode;
+ if (!in) {
in = ceph_get_inode(sb, vino);
if (IS_ERR(in)) {
pr_err("fill_trace bad get_inode "
spin_lock(&inode->i_lock);
dout("invalidate_pages %p gen %d revoking %d\n", inode,
ci->i_rdcache_gen, ci->i_rdcache_revoking);
- if (ci->i_rdcache_gen == 0 ||
- ci->i_rdcache_revoking != ci->i_rdcache_gen) {
- BUG_ON(ci->i_rdcache_revoking > ci->i_rdcache_gen);
+ if (ci->i_rdcache_revoking != ci->i_rdcache_gen) {
/* nevermind! */
- ci->i_rdcache_revoking = 0;
spin_unlock(&inode->i_lock);
goto out;
}
ceph_invalidate_nondirty_pages(inode->i_mapping);
spin_lock(&inode->i_lock);
- if (orig_gen == ci->i_rdcache_gen) {
+ if (orig_gen == ci->i_rdcache_gen &&
+ orig_gen == ci->i_rdcache_revoking) {
dout("invalidate_pages %p gen %d successful\n", inode,
ci->i_rdcache_gen);
- ci->i_rdcache_gen = 0;
- ci->i_rdcache_revoking = 0;
+ ci->i_rdcache_revoking--;
check = 1;
} else {
- dout("invalidate_pages %p gen %d raced, gen now %d\n",
- inode, orig_gen, ci->i_rdcache_gen);
+ dout("invalidate_pages %p gen %d raced, now %d revoking %d\n",
+ inode, orig_gen, ci->i_rdcache_gen,
+ ci->i_rdcache_revoking);
}
spin_unlock(&inode->i_lock);
return 0;
}
- dout("do_getattr inode %p mask %s\n", inode, ceph_cap_string(mask));
+ dout("do_getattr inode %p mask %s mode 0%o\n", inode, ceph_cap_string(mask), inode->i_mode);
if (ceph_caps_issued_mask(ceph_inode(inode), mask, 1))
return 0;
#include <linux/ioctl.h>
#include <linux/types.h>
-#define CEPH_IOCTL_MAGIC 0x98
+#define CEPH_IOCTL_MAGIC 0x97
/* just use u64 to align sanely on all archs */
struct ceph_ioctl_layout {
* Implement fcntl and flock locking functions.
*/
static int ceph_lock_message(u8 lock_type, u16 operation, struct file *file,
- u64 pid, u64 pid_ns,
- int cmd, u64 start, u64 length, u8 wait)
+ int cmd, u8 wait, struct file_lock *fl)
{
struct inode *inode = file->f_dentry->d_inode;
struct ceph_mds_client *mdsc =
ceph_sb_to_client(inode->i_sb)->mdsc;
struct ceph_mds_request *req;
int err;
+ u64 length = 0;
req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
req->r_inode = igrab(inode);
+ /* mds requires start and length rather than start and end */
+ if (LLONG_MAX == fl->fl_end)
+ length = 0;
+ else
+ length = fl->fl_end - fl->fl_start + 1;
+
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
"length: %llu, wait: %d, type`: %d", (int)lock_type,
- (int)operation, pid, start, length, wait, cmd);
+ (int)operation, (u64)fl->fl_pid, fl->fl_start,
+ length, wait, fl->fl_type);
+
req->r_args.filelock_change.rule = lock_type;
req->r_args.filelock_change.type = cmd;
- req->r_args.filelock_change.pid = cpu_to_le64(pid);
+ req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
/* This should be adjusted, but I'm not sure if
namespaces actually get id numbers*/
req->r_args.filelock_change.pid_namespace =
- cpu_to_le64((u64)pid_ns);
- req->r_args.filelock_change.start = cpu_to_le64(start);
+ cpu_to_le64((u64)(unsigned long)fl->fl_nspid);
+ req->r_args.filelock_change.start = cpu_to_le64(fl->fl_start);
req->r_args.filelock_change.length = cpu_to_le64(length);
req->r_args.filelock_change.wait = wait;
err = ceph_mdsc_do_request(mdsc, inode, req);
+
+ if ( operation == CEPH_MDS_OP_GETFILELOCK){
+ fl->fl_pid = le64_to_cpu(req->r_reply_info.filelock_reply->pid);
+ if (CEPH_LOCK_SHARED == req->r_reply_info.filelock_reply->type)
+ fl->fl_type = F_RDLCK;
+ else if (CEPH_LOCK_EXCL == req->r_reply_info.filelock_reply->type)
+ fl->fl_type = F_WRLCK;
+ else
+ fl->fl_type = F_UNLCK;
+
+ fl->fl_start = le64_to_cpu(req->r_reply_info.filelock_reply->start);
+ length = le64_to_cpu(req->r_reply_info.filelock_reply->start) +
+ le64_to_cpu(req->r_reply_info.filelock_reply->length);
+ if (length >= 1)
+ fl->fl_end = length -1;
+ else
+ fl->fl_end = 0;
+
+ }
ceph_mdsc_put_request(req);
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d err code %d", (int)lock_type,
- (int)operation, pid, start, length, wait, cmd, err);
+ "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+ (int)operation, (u64)fl->fl_pid, fl->fl_start,
+ length, wait, fl->fl_type, err);
return err;
}
*/
int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
{
- u64 length;
u8 lock_cmd;
int err;
u8 wait = 0;
else
lock_cmd = CEPH_LOCK_UNLOCK;
- if (LLONG_MAX == fl->fl_end)
- length = 0;
- else
- length = fl->fl_end - fl->fl_start + 1;
-
- err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
- (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- lock_cmd, fl->fl_start,
- length, wait);
+ err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file, lock_cmd, wait, fl);
if (!err) {
- dout("mds locked, locking locally");
- err = posix_lock_file(file, fl, NULL);
- if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
- /* undo! This should only happen if the kernel detects
- * local deadlock. */
- ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
- (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- CEPH_LOCK_UNLOCK, fl->fl_start,
- length, 0);
- dout("got %d on posix_lock_file, undid lock", err);
+ if ( op != CEPH_MDS_OP_GETFILELOCK ){
+ dout("mds locked, locking locally");
+ err = posix_lock_file(file, fl, NULL);
+ if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
+ /* undo! This should only happen if the kernel detects
+ * local deadlock. */
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ CEPH_LOCK_UNLOCK, 0, fl);
+ dout("got %d on posix_lock_file, undid lock", err);
+ }
}
+
} else {
dout("mds returned error code %d", err);
}
int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
{
- u64 length;
u8 lock_cmd;
int err;
u8 wait = 1;
lock_cmd = CEPH_LOCK_EXCL;
else
lock_cmd = CEPH_LOCK_UNLOCK;
- /* mds requires start and length rather than start and end */
- if (LLONG_MAX == fl->fl_end)
- length = 0;
- else
- length = fl->fl_end - fl->fl_start + 1;
err = ceph_lock_message(CEPH_LOCK_FLOCK, CEPH_MDS_OP_SETFILELOCK,
- file, (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- lock_cmd, fl->fl_start,
- length, wait);
+ file, lock_cmd, wait, fl);
if (!err) {
err = flock_lock_file_wait(file, fl);
if (err) {
ceph_lock_message(CEPH_LOCK_FLOCK,
CEPH_MDS_OP_SETFILELOCK,
- file, (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- CEPH_LOCK_UNLOCK, fl->fl_start,
- length, 0);
+ file, CEPH_LOCK_UNLOCK, 0, fl);
dout("got %d on flock_lock_file_wait, undid lock", err);
}
} else {
#include <linux/sched.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include "super.h"
#include "mds_client.h"
return err;
}
+/*
+ * parse fcntl F_GETLK results
+ */
+static int parse_reply_info_filelock(void **p, void *end,
+ struct ceph_mds_reply_info_parsed *info)
+{
+ if (*p + sizeof(*info->filelock_reply) > end)
+ goto bad;
+
+ info->filelock_reply = *p;
+ *p += sizeof(*info->filelock_reply);
+
+ if (unlikely(*p != end))
+ goto bad;
+ return 0;
+
+bad:
+ return -EIO;
+}
+
+/*
+ * parse extra results
+ */
+static int parse_reply_info_extra(void **p, void *end,
+ struct ceph_mds_reply_info_parsed *info)
+{
+ if (info->head->op == CEPH_MDS_OP_GETFILELOCK)
+ return parse_reply_info_filelock(p, end, info);
+ else
+ return parse_reply_info_dir(p, end, info);
+}
+
/*
* parse entire mds reply
*/
goto out_bad;
}
- /* dir content */
+ /* extra */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
- err = parse_reply_info_dir(&p, p+len, info);
+ err = parse_reply_info_extra(&p, p+len, info);
if (err < 0)
goto out_bad;
}
ceph_mdsc_get_request(req);
__insert_request(mdsc, req);
+ req->r_uid = current_fsuid();
+ req->r_gid = current_fsgid();
+
if (dir) {
struct ceph_inode_info *ci = ceph_inode(dir);
head->mdsmap_epoch = cpu_to_le32(mdsc->mdsmap->m_epoch);
head->op = cpu_to_le32(req->r_op);
- head->caller_uid = cpu_to_le32(current_fsuid());
- head->caller_gid = cpu_to_le32(current_fsgid());
+ head->caller_uid = cpu_to_le32(req->r_uid);
+ head->caller_gid = cpu_to_le32(req->r_gid);
head->args = req->r_args;
ceph_encode_filepath(&p, end, ino1, path1);
mutex_lock(&session->s_mutex);
if (err < 0) {
- pr_err("mdsc_handle_reply got corrupt reply mds%d\n", mds);
+ pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid);
ceph_msg_dump(msg);
goto out_err;
}
mutex_lock(&req->r_fill_mutex);
err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
if (err == 0) {
- if (result == 0 && rinfo->dir_nr)
+ if (result == 0 && req->r_op != CEPH_MDS_OP_GETFILELOCK &&
+ rinfo->dir_nr)
ceph_readdir_prepopulate(req, req->r_session);
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
}
};
/*
- * parsed info about an mds reply, including information about the
- * target inode and/or its parent directory and dentry, and directory
- * contents (for readdir results).
+ * parsed info about an mds reply, including information about
+ * either: 1) the target inode and/or its parent directory and dentry,
+ * and directory contents (for readdir results), or
+ * 2) the file range lock info (for fcntl F_GETLK results).
*/
struct ceph_mds_reply_info_parsed {
struct ceph_mds_reply_head *head;
+ /* trace */
struct ceph_mds_reply_info_in diri, targeti;
struct ceph_mds_reply_dirfrag *dirfrag;
char *dname;
u32 dname_len;
struct ceph_mds_reply_lease *dlease;
- struct ceph_mds_reply_dirfrag *dir_dir;
- int dir_nr;
- char **dir_dname;
- u32 *dir_dname_len;
- struct ceph_mds_reply_lease **dir_dlease;
- struct ceph_mds_reply_info_in *dir_in;
- u8 dir_complete, dir_end;
+ /* extra */
+ union {
+ /* for fcntl F_GETLK results */
+ struct ceph_filelock *filelock_reply;
+
+ /* for readdir results */
+ struct {
+ struct ceph_mds_reply_dirfrag *dir_dir;
+ int dir_nr;
+ char **dir_dname;
+ u32 *dir_dname_len;
+ struct ceph_mds_reply_lease **dir_dlease;
+ struct ceph_mds_reply_info_in *dir_in;
+ u8 dir_complete, dir_end;
+ };
+ };
/* encoded blob describing snapshot contexts for certain
operations (e.g., open) */
union ceph_mds_request_args r_args;
int r_fmode; /* file mode, if expecting cap */
+ uid_t r_uid;
+ gid_t r_gid;
/* for choosing which mds to send this request to */
int r_direct_mode;
int i_rd_ref, i_rdcache_ref, i_wr_ref;
int i_wrbuffer_ref, i_wrbuffer_ref_head;
u32 i_shared_gen; /* increment each time we get FILE_SHARED */
- u32 i_rdcache_gen; /* we increment this each time we get
- FILE_CACHE. If it's non-zero, we
- _may_ have cached pages. */
+ u32 i_rdcache_gen; /* incremented each time we get FILE_CACHE. */
u32 i_rdcache_revoking; /* RDCACHE gen to async invalidate, if any */
struct list_head i_unsafe_writes; /* uncommitted sync writes */
select NLS
select CRYPTO
select CRYPTO_MD5
+ select CRYPTO_HMAC
select CRYPTO_ARC4
help
This is the client VFS module for the Common Internet File System
to be cached locally on disk through the general filesystem cache
manager. If unsure, say N.
+config CIFS_ACL
+ bool "Provide CIFS ACL support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CIFS_XATTR
+ help
+ Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
+ is handed over to the application/caller.
+
config CIFS_EXPERIMENTAL
bool "CIFS Experimental Features (EXPERIMENTAL)"
depends on CIFS && EXPERIMENTAL
cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \
- readdir.o ioctl.o sess.o export.o cifsacl.o
+ readdir.o ioctl.o sess.o export.o
+
+cifs-$(CONFIG_CIFS_ACL) += cifsacl.o
cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
wsize default write size (default 57344)
maximum wsize currently allowed by CIFS is 57344 (fourteen
4096 byte pages)
+ actimeo=n attribute cache timeout in seconds (default 1 second).
+ After this timeout, the cifs client requests fresh attribute
+ information from the server. This option allows to tune the
+ attribute cache timeout to suit the workload needs. Shorter
+ timeouts mean better the cache coherency, but increased number
+ of calls to the server. Longer timeouts mean reduced number
+ of calls to the server at the expense of less stricter cache
+ coherency checks (i.e. incorrect attribute cache for a short
+ period of time).
rw mount the network share read-write (note that the
server may still consider the share read-only)
ro mount network share read-only
struct nls_table *local_nls;
unsigned int rsize;
unsigned int wsize;
+ unsigned long actimeo; /* attribute cache timeout (jiffies) */
atomic_t active;
uid_t mnt_uid;
gid_t mnt_gid;
#include "cifs_debug.h"
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
- return NULL;
+ return ERR_CAST(tlink);
xid = GetXid();
rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), fid, &pntsd, pacllen);
cifs_put_tlink(tlink);
- cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
+ cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+ if (rc)
+ return ERR_PTR(rc);
return pntsd;
}
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
- return NULL;
+ return ERR_CAST(tlink);
tcon = tlink_tcon(tlink);
xid = GetXid();
rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL, 0,
&fid, &oplock, NULL, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc) {
- cERROR(1, "Unable to open file to get ACL");
- goto out;
+ if (!rc) {
+ rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
+ CIFSSMBClose(xid, tcon, fid);
}
- rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
- cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
-
- CIFSSMBClose(xid, tcon, fid);
- out:
cifs_put_tlink(tlink);
FreeXid(xid);
+
+ cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+ if (rc)
+ return ERR_PTR(rc);
return pntsd;
}
/* Retrieve an ACL from the server */
-static struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
+struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
struct inode *inode, const char *path,
u32 *pacllen)
{
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void
+int
cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
struct inode *inode, const char *path, const __u16 *pfid)
{
pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen);
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
- if (pntsd)
+ if (IS_ERR(pntsd)) {
+ rc = PTR_ERR(pntsd);
+ cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+ } else {
rc = parse_sec_desc(pntsd, acllen, fattr);
- if (rc)
- cFYI(1, "parse sec desc failed rc = %d", rc);
+ kfree(pntsd);
+ if (rc)
+ cERROR(1, "parse sec desc failed rc = %d", rc);
+ }
- kfree(pntsd);
- return;
+ return rc;
}
/* Convert mode bits to an ACL so we can update the ACL on the server */
-int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
+int mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode)
{
int rc = 0;
__u32 secdesclen = 0;
/* Add three ACEs for owner, group, everyone getting rid of
other ACEs as chmod disables ACEs and set the security descriptor */
- if (pntsd) {
+ if (IS_ERR(pntsd)) {
+ rc = PTR_ERR(pntsd);
+ cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+ } else {
/* allocate memory for the smb header,
set security descriptor request security descriptor
parameters, and secuirty descriptor itself */
return rc;
}
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
char sidname[SIDNAMELENGTH];
} __attribute__((packed));
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
extern int match_sid(struct cifs_sid *);
extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
-
#endif /* _CIFSACL_H */
seq_printf(s, ",acl");
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MF_SYMLINKS)
seq_printf(s, ",mfsymlinks");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE)
+ seq_printf(s, ",fsc");
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+ /* convert actimeo and display it in seconds */
+ seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ);
return 0;
}
GlobalCurrentXid = 0;
GlobalTotalActiveXid = 0;
GlobalMaxActiveXid = 0;
- memset(Local_System_Name, 0, 15);
spin_lock_init(&cifs_tcp_ses_lock);
spin_lock_init(&cifs_file_list_lock);
spin_lock_init(&GlobalMid_Lock);
#define CIFS_MIN_RCV_POOL 4
+/*
+ * default attribute cache timeout (jiffies)
+ */
+#define CIFS_DEF_ACTIMEO (1 * HZ)
+
+/*
+ * max attribute cache timeout (jiffies) - 2^30
+ */
+#define CIFS_MAX_ACTIMEO (1 << 30)
+
/*
* MAX_REQ is the maximum number of requests that WE will send
* on one socket concurrently. It also matches the most common
GLOBAL_EXTERN unsigned int GlobalMaxActiveXid; /* prot by GlobalMid_Sem */
GLOBAL_EXTERN spinlock_t GlobalMid_Lock; /* protects above & list operations */
/* on midQ entries */
-GLOBAL_EXTERN char Local_System_Name[15];
-
/*
* Global counters, updated atomically
*/
__func__, curr_xid, (int)rc); \
} while (0)
extern char *build_path_from_dentry(struct dentry *);
-extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
+extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+ struct cifsTconInfo *tcon);
extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
extern char *cifs_compose_mount_options(const char *sb_mountdata,
const char *fullpath, const struct dfs_info3_param *ref,
struct TCP_Server_Info *);
extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool);
-#endif
extern unsigned int smbCalcSize(struct smb_hdr *ptr);
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, int xid);
-extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
struct cifs_fattr *fattr, struct inode *inode,
const char *path, const __u16 *pfid);
-extern int mode_to_acl(struct inode *inode, const char *path, __u64);
+extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
+extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
+ const char *, u32 *);
extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
const char *);
}
#ifdef CONFIG_CIFS_EXPERIMENTAL
-/* Initialize NT TRANSACT SMB into small smb request buffer.
- This assumes that all NT TRANSACTS that we init here have
- total parm and data under about 400 bytes (to fit in small cifs
- buffer size), which is the case so far, it easily fits. NB:
- Setup words themselves and ByteCount
- MaxSetupCount (size of returned setup area) and
- MaxParameterCount (returned parms size) must be set by caller */
-static int
-smb_init_nttransact(const __u16 sub_command, const int setup_count,
- const int parm_len, struct cifsTconInfo *tcon,
- void **ret_buf)
-{
- int rc;
- __u32 temp_offset;
- struct smb_com_ntransact_req *pSMB;
-
- rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
- (void **)&pSMB);
- if (rc)
- return rc;
- *ret_buf = (void *)pSMB;
- pSMB->Reserved = 0;
- pSMB->TotalParameterCount = cpu_to_le32(parm_len);
- pSMB->TotalDataCount = 0;
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
- pSMB->ParameterCount = pSMB->TotalParameterCount;
- pSMB->DataCount = pSMB->TotalDataCount;
- temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
- (setup_count * 2) - 4 /* for rfc1001 length itself */;
- pSMB->ParameterOffset = cpu_to_le32(temp_offset);
- pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
- pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
- pSMB->SubCommand = cpu_to_le16(sub_command);
- return 0;
-}
-
-static int
-validate_ntransact(char *buf, char **ppparm, char **ppdata,
- __u32 *pparmlen, __u32 *pdatalen)
-{
- char *end_of_smb;
- __u32 data_count, data_offset, parm_count, parm_offset;
- struct smb_com_ntransact_rsp *pSMBr;
-
- *pdatalen = 0;
- *pparmlen = 0;
-
- if (buf == NULL)
- return -EINVAL;
-
- pSMBr = (struct smb_com_ntransact_rsp *)buf;
-
- /* ByteCount was converted from little endian in SendReceive */
- end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
-
- data_offset = le32_to_cpu(pSMBr->DataOffset);
- data_count = le32_to_cpu(pSMBr->DataCount);
- parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
- parm_count = le32_to_cpu(pSMBr->ParameterCount);
-
- *ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
- *ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
-
- /* should we also check that parm and data areas do not overlap? */
- if (*ppparm > end_of_smb) {
- cFYI(1, "parms start after end of smb");
- return -EINVAL;
- } else if (parm_count + *ppparm > end_of_smb) {
- cFYI(1, "parm end after end of smb");
- return -EINVAL;
- } else if (*ppdata > end_of_smb) {
- cFYI(1, "data starts after end of smb");
- return -EINVAL;
- } else if (data_count + *ppdata > end_of_smb) {
- cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
- *ppdata, data_count, (data_count + *ppdata),
- end_of_smb, pSMBr);
- return -EINVAL;
- } else if (parm_count + data_count > pSMBr->ByteCount) {
- cFYI(1, "parm count and data count larger than SMB");
- return -EINVAL;
- }
- *pdatalen = data_count;
- *pparmlen = parm_count;
- return 0;
-}
-
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
#endif /* CONFIG_POSIX */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
+/*
+ * Initialize NT TRANSACT SMB into small smb request buffer. This assumes that
+ * all NT TRANSACTS that we init here have total parm and data under about 400
+ * bytes (to fit in small cifs buffer size), which is the case so far, it
+ * easily fits. NB: Setup words themselves and ByteCount MaxSetupCount (size of
+ * returned setup area) and MaxParameterCount (returned parms size) must be set
+ * by caller
+ */
+static int
+smb_init_nttransact(const __u16 sub_command, const int setup_count,
+ const int parm_len, struct cifsTconInfo *tcon,
+ void **ret_buf)
+{
+ int rc;
+ __u32 temp_offset;
+ struct smb_com_ntransact_req *pSMB;
+
+ rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
+ (void **)&pSMB);
+ if (rc)
+ return rc;
+ *ret_buf = (void *)pSMB;
+ pSMB->Reserved = 0;
+ pSMB->TotalParameterCount = cpu_to_le32(parm_len);
+ pSMB->TotalDataCount = 0;
+ pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
+ MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+ pSMB->ParameterCount = pSMB->TotalParameterCount;
+ pSMB->DataCount = pSMB->TotalDataCount;
+ temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
+ (setup_count * 2) - 4 /* for rfc1001 length itself */;
+ pSMB->ParameterOffset = cpu_to_le32(temp_offset);
+ pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
+ pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
+ pSMB->SubCommand = cpu_to_le16(sub_command);
+ return 0;
+}
+
+static int
+validate_ntransact(char *buf, char **ppparm, char **ppdata,
+ __u32 *pparmlen, __u32 *pdatalen)
+{
+ char *end_of_smb;
+ __u32 data_count, data_offset, parm_count, parm_offset;
+ struct smb_com_ntransact_rsp *pSMBr;
+
+ *pdatalen = 0;
+ *pparmlen = 0;
+
+ if (buf == NULL)
+ return -EINVAL;
+
+ pSMBr = (struct smb_com_ntransact_rsp *)buf;
+
+ /* ByteCount was converted from little endian in SendReceive */
+ end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
+ (char *)&pSMBr->ByteCount;
+
+ data_offset = le32_to_cpu(pSMBr->DataOffset);
+ data_count = le32_to_cpu(pSMBr->DataCount);
+ parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
+ parm_count = le32_to_cpu(pSMBr->ParameterCount);
+
+ *ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
+ *ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
+
+ /* should we also check that parm and data areas do not overlap? */
+ if (*ppparm > end_of_smb) {
+ cFYI(1, "parms start after end of smb");
+ return -EINVAL;
+ } else if (parm_count + *ppparm > end_of_smb) {
+ cFYI(1, "parm end after end of smb");
+ return -EINVAL;
+ } else if (*ppdata > end_of_smb) {
+ cFYI(1, "data starts after end of smb");
+ return -EINVAL;
+ } else if (data_count + *ppdata > end_of_smb) {
+ cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
+ *ppdata, data_count, (data_count + *ppdata),
+ end_of_smb, pSMBr);
+ return -EINVAL;
+ } else if (parm_count + data_count > pSMBr->ByteCount) {
+ cFYI(1, "parm count and data count larger than SMB");
+ return -EINVAL;
+ }
+ *pdatalen = data_count;
+ *pparmlen = parm_count;
+ return 0;
+}
+
/* Get Security Descriptor (by handle) from remote server for a file or dir */
int
CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid,
return (rc);
}
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
+#endif /* CONFIG_CIFS_ACL */
/* Legacy Query Path Information call for lookup to old servers such
as Win9x/WinME */
unsigned int wsize;
bool sockopt_tcp_nodelay:1;
unsigned short int port;
+ unsigned long actimeo; /* attribute cache timeout (jiffies) */
char *prepath;
struct sockaddr_storage srcaddr; /* allow binding to a local IP */
struct nls_table *local_nls;
short int override_gid = -1;
bool uid_specified = false;
bool gid_specified = false;
+ char *nodename = utsname()->nodename;
separator[0] = ',';
separator[1] = 0;
- if (Local_System_Name[0] != 0)
- memcpy(vol->source_rfc1001_name, Local_System_Name, 15);
- else {
- char *nodename = utsname()->nodename;
- int n = strnlen(nodename, 15);
- memset(vol->source_rfc1001_name, 0x20, 15);
- for (i = 0; i < n; i++) {
- /* does not have to be perfect mapping since field is
- informational, only used for servers that do not support
- port 445 and it can be overridden at mount time */
- vol->source_rfc1001_name[i] = toupper(nodename[i]);
- }
- }
+ /*
+ * does not have to be perfect mapping since field is
+ * informational, only used for servers that do not support
+ * port 445 and it can be overridden at mount time
+ */
+ memset(vol->source_rfc1001_name, 0x20, 15);
+ for (i = 0; i < strnlen(nodename, 15); i++)
+ vol->source_rfc1001_name[i] = toupper(nodename[i]);
+
vol->source_rfc1001_name[15] = 0;
/* null target name indicates to use *SMBSERVR default called name
if we end up sending RFC1001 session initialize */
/* default to using server inode numbers where available */
vol->server_ino = 1;
+ vol->actimeo = CIFS_DEF_ACTIMEO;
+
if (!options)
return 1;
printk(KERN_WARNING "CIFS: server net"
"biosname longer than 15 truncated.\n");
}
+ } else if (strnicmp(data, "actimeo", 7) == 0) {
+ if (value && *value) {
+ vol->actimeo = HZ * simple_strtoul(value,
+ &value, 0);
+ if (vol->actimeo > CIFS_MAX_ACTIMEO) {
+ cERROR(1, "CIFS: attribute cache"
+ "timeout too large");
+ return 1;
+ }
+ }
} else if (strnicmp(data, "credentials", 4) == 0) {
/* ignore */
} else if (strnicmp(data, "version", 3) == 0) {
"supported. Instead set "
"/proc/fs/cifs/LookupCacheEnabled to 0\n");
} else if (strnicmp(data, "fsc", 3) == 0) {
+#ifndef CONFIG_CIFS_FSCACHE
+ cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
+ "kernel config option set");
+ return 1;
+#endif
vol->fsc = true;
} else if (strnicmp(data, "mfsymlinks", 10) == 0) {
vol->mfsymlinks = true;
cFYI(1, "file mode: 0x%x dir mode: 0x%x",
cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode);
+ cifs_sb->actimeo = pvolume_info->actimeo;
+
if (pvolume_info->noperm)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
if (pvolume_info->setuids)
/* check if a whole path (including prepath) is not remote */
if (!rc && cifs_sb->prepathlen && tcon) {
/* build_path_to_root works only when we have a valid tcon */
- full_path = cifs_build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb, tcon);
if (full_path == NULL) {
rc = -ENOMEM;
goto mount_fail_check;
}
rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
- if (rc != -EREMOTE) {
+ if (rc != 0 && rc != -EREMOTE) {
kfree(full_path);
goto mount_fail_check;
}
/* Search for server name delimiter */
sep = memchr(hostname, '\\', len);
if (sep)
- len = sep - unc;
+ len = sep - hostname;
else
cFYI(1, "%s: probably server name is whole unc: %s",
__func__, unc);
return total_written;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
{
spin_unlock(&cifs_file_list_lock);
return NULL;
}
-#endif
struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
void cifs_oplock_break_put(struct cifsFileInfo *cfile)
{
+ struct super_block *sb = cfile->dentry->d_sb;
+
cifsFileInfo_put(cfile);
- cifs_sb_deactive(cfile->dentry->d_sb);
+ cifs_sb_deactive(sb);
}
const struct address_space_operations cifs_addr_ops = {
* fs/cifs/fscache.c - CIFS filesystem cache interface
*
* Copyright (c) 2010 Novell, Inc.
- * Author(s): Suresh Jayaraman (sjayaraman@suse.de>
+ * Author(s): Suresh Jayaraman <sjayaraman@suse.de>
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published
if (cifsi->fscache)
return;
- cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
+ cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
&cifs_fscache_inode_object_def, cifsi);
- cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
+ cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
cifsi->fscache);
+ }
}
void cifs_fscache_release_inode_cookie(struct inode *inode)
{
if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
cifs_fscache_disable_inode_cookie(inode);
- else {
+ else
cifs_fscache_enable_inode_cookie(inode);
- cFYI(1, "CIFS: fscache inode cookie set");
- }
}
void cifs_fscache_reset_inode_cookie(struct inode *inode)
cFYI(1, "cifs_sfu_type failed: %d", tmprc);
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- cFYI(1, "Getting mode bits from ACL");
- cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
+ rc = cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path,
+ pfid);
+ if (rc) {
+ cFYI(1, "%s: Getting ACL failed with error: %d",
+ __func__, rc);
+ goto cgii_exit;
+ }
}
-#endif
+#endif /* CONFIG_CIFS_ACL */
/* fill in remaining high mode bits e.g. SUID, VTX */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
.lookup = cifs_lookup,
};
-char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
+char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+ struct cifsTconInfo *tcon)
{
int pplen = cifs_sb->prepathlen;
int dfsplen;
char *full_path = NULL;
- struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
/* if no prefix path, simply set path to the root of share to "" */
if (pplen == 0) {
char *full_path;
struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
- full_path = cifs_build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb, tcon);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
xid, NULL);
- if (!inode)
- return ERR_PTR(rc);
+ if (!inode) {
+ inode = ERR_PTR(rc);
+ goto out;
+ }
#ifdef CONFIG_CIFS_FSCACHE
/* populate tcon->resource_id */
inode->i_uid = cifs_sb->mnt_uid;
inode->i_gid = cifs_sb->mnt_gid;
} else if (rc) {
- kfree(full_path);
- _FreeXid(xid);
iget_failed(inode);
- return ERR_PTR(rc);
+ inode = ERR_PTR(rc);
}
-
+out:
kfree(full_path);
/* can not call macro FreeXid here since in a void func
* TODO: This is no longer true
cifs_inode_needs_reval(struct inode *inode)
{
struct cifsInodeInfo *cifs_i = CIFS_I(inode);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
if (cifs_i->clientCanCacheRead)
return false;
if (cifs_i->time == 0)
return true;
- /* FIXME: the actimeo should be tunable */
- if (time_after_eq(jiffies, cifs_i->time + HZ))
+ if (!time_in_range(jiffies, cifs_i->time,
+ cifs_i->time + cifs_sb->actimeo))
return true;
/* hardlinked files w/ noserverino get "special" treatment */
- if (!(CIFS_SB(inode->i_sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
S_ISREG(inode->i_mode) && inode->i_nlink != 1)
return true;
return false;
}
-/* check invalid_mapping flag and zap the cache if it's set */
+/*
+ * Zap the cache. Called when invalid_mapping flag is set.
+ */
static void
cifs_invalidate_mapping(struct inode *inode)
{
if (attrs->ia_valid & ATTR_MODE) {
rc = 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- rc = mode_to_acl(inode, full_path, mode);
- else
-#endif
+#ifdef CONFIG_CIFS_ACL
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ rc = mode_to_cifs_acl(inode, full_path, mode);
+ if (rc) {
+ cFYI(1, "%s: Setting ACL failed with error: %d",
+ __func__, rc);
+ goto cifs_setattr_exit;
+ }
+ } else
+#endif /* CONFIG_CIFS_ACL */
if (((mode & S_IWUGO) == 0) &&
(cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
char *full_path = NULL;
struct cifsFileInfo *cifsFile;
struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- struct tcon_link *tlink;
+ struct tcon_link *tlink = NULL;
struct cifsTconInfo *pTcon;
- tlink = cifs_sb_tlink(cifs_sb);
- if (IS_ERR(tlink))
- return PTR_ERR(tlink);
- pTcon = tlink_tcon(tlink);
-
- if (file->private_data == NULL)
- file->private_data =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
if (file->private_data == NULL) {
- rc = -ENOMEM;
- goto error_exit;
+ tlink = cifs_sb_tlink(cifs_sb);
+ if (IS_ERR(tlink))
+ return PTR_ERR(tlink);
+
+ cifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+ if (cifsFile == NULL) {
+ rc = -ENOMEM;
+ goto error_exit;
+ }
+ file->private_data = cifsFile;
+ cifsFile->tlink = cifs_get_tlink(tlink);
+ pTcon = tlink_tcon(tlink);
+ } else {
+ cifsFile = file->private_data;
+ pTcon = tlink_tcon(cifsFile->tlink);
}
- cifsFile = file->private_data;
cifsFile->invalidHandle = true;
cifsFile->srch_inf.endOfSearch = false;
- cifsFile->tlink = cifs_get_tlink(tlink);
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
ino, fattr.cf_dtype);
- /*
- * we can not return filldir errors to the caller since they are
- * "normal" when the stat blocksize is too small - we return remapped
- * error instead
- *
- * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
- * case already. Why should we be clobbering other errors from it?
- */
- if (rc) {
- cFYI(1, "filldir rc = %d", rc);
- rc = -EOVERFLOW;
- }
dput(tmp_dentry);
return rc;
}
#define MAX_EA_VALUE_SIZE 65535
#define CIFS_XATTR_DOS_ATTRIB "user.DosAttrib"
+#define CIFS_XATTR_CIFS_ACL "system.cifs_acl"
#define CIFS_XATTR_USER_PREFIX "user."
#define CIFS_XATTR_SYSTEM_PREFIX "system."
#define CIFS_XATTR_OS2_PREFIX "os2."
-#define CIFS_XATTR_SECURITY_PREFIX ".security"
+#define CIFS_XATTR_SECURITY_PREFIX "security."
#define CIFS_XATTR_TRUSTED_PREFIX "trusted."
#define XATTR_TRUSTED_PREFIX_LEN 8
#define XATTR_SECURITY_PREFIX_LEN 9
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- __u16 fid;
- int oplock = 0;
- struct cifs_ntsd *pacl = NULL;
- __u32 buflen = 0;
- if (experimEnabled)
- rc = CIFSSMBOpen(xid, pTcon, full_path,
- FILE_OPEN, GENERIC_READ, 0, &fid,
- &oplock, NULL, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- /* else rc is EOPNOTSUPP from above */
-
- if (rc == 0) {
- rc = CIFSSMBGetCIFSACL(xid, pTcon, fid, &pacl,
- &buflen);
- CIFSSMBClose(xid, pTcon, fid);
- }
- }
-#endif /* EXPERIMENTAL */
#else
- cFYI(1, "query POSIX ACL not supported yet");
+ cFYI(1, "Query POSIX ACL not supported yet");
#endif /* CONFIG_CIFS_POSIX */
} else if (strncmp(ea_name, POSIX_ACL_XATTR_DEFAULT,
strlen(POSIX_ACL_XATTR_DEFAULT)) == 0) {
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
#else
- cFYI(1, "query POSIX default ACL not supported yet");
-#endif
+ cFYI(1, "Query POSIX default ACL not supported yet");
+#endif /* CONFIG_CIFS_POSIX */
+ } else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL,
+ strlen(CIFS_XATTR_CIFS_ACL)) == 0) {
+#ifdef CONFIG_CIFS_ACL
+ u32 acllen;
+ struct cifs_ntsd *pacl;
+
+ pacl = get_cifs_acl(cifs_sb, direntry->d_inode,
+ full_path, &acllen);
+ if (IS_ERR(pacl)) {
+ rc = PTR_ERR(pacl);
+ cERROR(1, "%s: error %zd getting sec desc",
+ __func__, rc);
+ } else {
+ if (ea_value) {
+ if (acllen > buf_size)
+ acllen = -ERANGE;
+ else
+ memcpy(ea_value, pacl, acllen);
+ }
+ rc = acllen;
+ kfree(pacl);
+ }
+#else
+ cFYI(1, "Query CIFS ACL not supported yet");
+#endif /* CONFIG_CIFS_ACL */
} else if (strncmp(ea_name,
CIFS_XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) == 0) {
cFYI(1, "Trusted xattr namespace not supported yet");
argv++;
if (i++ >= max)
return -E2BIG;
+
+ if (fatal_signal_pending(current))
+ return -ERESTARTNOHAND;
+ cond_resched();
}
}
return i;
while (len > 0) {
int offset, bytes_to_copy;
+ if (fatal_signal_pending(current)) {
+ ret = -ERESTARTNOHAND;
+ goto out;
+ }
+ cond_resched();
+
offset = pos % PAGE_SIZE;
if (offset == 0)
offset = PAGE_SIZE;
if (!kmapped_page || kpos != (pos & PAGE_MASK)) {
struct page *page;
-#ifdef CONFIG_STACK_GROWSUP
- ret = expand_stack_downwards(bprm->vma, pos);
- if (ret < 0) {
- /* We've exceed the stack rlimit. */
- ret = -E2BIG;
- goto out;
- }
-#endif
- ret = get_user_pages(current, bprm->mm, pos,
- 1, 1, 1, &page, NULL);
- if (ret <= 0) {
- /* We've exceed the stack rlimit. */
+ page = get_arg_page(bprm, pos, 1);
+ if (!page) {
ret = -E2BIG;
goto out;
}
return retval;
out:
- if (bprm->mm)
+ if (bprm->mm) {
+ acct_arg_size(bprm, 0);
mmput(bprm->mm);
+ }
out_file:
if (bprm->file) {
#include <linux/compiler.h>
#include <linux/sched.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#include <linux/if.h>
#include <linux/if_bridge.h>
#include <linux/key.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/file.h>
#include <linux/crypto.h>
#include "ecryptfs_kernel.h"
#ifdef CONFIG_MMU
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+ struct mm_struct *mm = current->mm;
+ long diff = (long)(pages - bprm->vma_pages);
+
+ if (!mm || !diff)
+ return;
+
+ bprm->vma_pages = pages;
+
+#ifdef SPLIT_RSS_COUNTING
+ add_mm_counter(mm, MM_ANONPAGES, diff);
+#else
+ spin_lock(&mm->page_table_lock);
+ add_mm_counter(mm, MM_ANONPAGES, diff);
+ spin_unlock(&mm->page_table_lock);
+#endif
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
struct rlimit *rlim;
+ acct_arg_size(bprm, size / PAGE_SIZE);
+
/*
* We've historically supported up to 32 pages (ARG_MAX)
* of argument strings even with small stacks
vma->vm_flags = VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP;
vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
INIT_LIST_HEAD(&vma->anon_vma_chain);
+
+ err = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+ if (err)
+ goto err;
+
err = insert_vm_struct(mm, vma);
if (err)
goto err;
#else
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
/*
* Release all of the old mmap stuff
*/
+ acct_arg_size(bprm, 0);
retval = exec_mmap(bprm->mm);
if (retval)
goto out;
return retval;
out:
- if (bprm->mm)
- mmput (bprm->mm);
+ if (bprm->mm) {
+ acct_arg_size(bprm, 0);
+ mmput(bprm->mm);
+ }
out_file:
if (bprm->file) {
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/parser.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/exportfs.h>
#include <linux/vfs.h>
#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */
#define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */
#define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */
+#define EXT4_MOUNT_MBLK_IO_SUBMIT 0x4000000 /* multi-block io submits */
#define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */
#define EXT4_MOUNT_DATA_ERR_ABORT 0x10000000 /* Abort on file data write */
#define EXT4_MOUNT_BLOCK_VALIDITY 0x20000000 /* Block validity checking */
*/
if (unlikely(journal_data && PageChecked(page)))
err = __ext4_journalled_writepage(page, len);
- else
+ else if (test_opt(inode->i_sb, MBLK_IO_SUBMIT))
err = ext4_bio_write_page(&io_submit, page,
len, mpd->wbc);
+ else
+ err = block_write_full_page(page,
+ noalloc_get_block_write, mpd->wbc);
if (!err)
mpd->pages_written++;
return err;
}
+ case FITRIM:
+ {
+ struct super_block *sb = inode->i_sb;
+ struct fstrim_range range;
+ int ret = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&range, (struct fstrim_range *)arg,
+ sizeof(range)))
+ return -EFAULT;
+
+ ret = ext4_trim_fs(sb, &range);
+ if (ret < 0)
+ return ret;
+
+ if (copy_to_user((struct fstrim_range *)arg, &range,
+ sizeof(range)))
+ return -EFAULT;
+
+ return 0;
+ }
+
default:
return -ENOTTY;
}
if (namelen > EXT4_NAME_LEN)
return NULL;
if ((namelen <= 2) && (name[0] == '.') &&
- (name[1] == '.' || name[1] == '0')) {
+ (name[1] == '.' || name[1] == '\0')) {
/*
* "." or ".." will only be in the first block
* NFS may look up ".."; "." should be handled by the VFS
} while (bh != head);
}
- put_io_page(io_end->pages[i]);
-
/*
* If this is a partial write which happened to make
* all buffers uptodate then we can optimize away a
*/
if (!partial_write)
SetPageUptodate(page);
+
+ put_io_page(io_end->pages[i]);
}
io_end->num_io_pages = 0;
inode = io_end->inode;
GFP_NOFS);
if (err)
goto exit_bh;
+ for (i = 0, bit = gdblocks + 1; i < reserved_gdb; i++, bit++)
+ ext4_set_bit(bit, bh->b_data);
ext4_debug("mark block bitmap %#04llx (+%llu)\n", input->block_bitmap,
input->block_bitmap - start);
err = sb_issue_zeroout(sb, block, sbi->s_itb_per_group, GFP_NOFS);
if (err)
goto exit_bh;
+ for (i = 0, bit = input->inode_table - start;
+ i < sbi->s_itb_per_group; i++, bit++)
+ ext4_set_bit(bit, bh->b_data);
if ((err = extend_or_restart_transaction(handle, 2, bh)))
goto exit_bh;
!(def_mount_opts & EXT4_DEFM_NODELALLOC))
seq_puts(seq, ",nodelalloc");
+ if (test_opt(sb, MBLK_IO_SUBMIT))
+ seq_puts(seq, ",mblk_io_submit");
if (sbi->s_stripe)
seq_printf(seq, ",stripe=%lu", sbi->s_stripe);
/*
.quota_write = ext4_quota_write,
#endif
.bdev_try_to_free_page = bdev_try_to_free_page,
- .trim_fs = ext4_trim_fs
};
static const struct super_operations ext4_nojournal_sops = {
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err,
Opt_resize, Opt_usrquota, Opt_grpquota, Opt_i_version,
- Opt_stripe, Opt_delalloc, Opt_nodelalloc,
- Opt_block_validity, Opt_noblock_validity,
+ Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit,
+ Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
Opt_inode_readahead_blks, Opt_journal_ioprio,
Opt_dioread_nolock, Opt_dioread_lock,
Opt_discard, Opt_nodiscard,
{Opt_resize, "resize"},
{Opt_delalloc, "delalloc"},
{Opt_nodelalloc, "nodelalloc"},
+ {Opt_mblk_io_submit, "mblk_io_submit"},
+ {Opt_nomblk_io_submit, "nomblk_io_submit"},
{Opt_block_validity, "block_validity"},
{Opt_noblock_validity, "noblock_validity"},
{Opt_inode_readahead_blks, "inode_readahead_blks=%u"},
case Opt_nodelalloc:
clear_opt(sbi->s_mount_opt, DELALLOC);
break;
+ case Opt_mblk_io_submit:
+ set_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+ break;
+ case Opt_nomblk_io_submit:
+ clear_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+ break;
case Opt_stripe:
if (match_int(&args[0], &option))
return 0;
struct ext4_li_request *elr;
mutex_lock(&ext4_li_info->li_list_mtx);
- if (list_empty(&ext4_li_info->li_request_list))
- return;
-
list_for_each_safe(pos, n, &ext4_li_info->li_request_list) {
elr = list_entry(pos, struct ext4_li_request,
lr_request);
* Test whether we have more sectors than will fit in sector_t,
* and whether the max offset is addressable by the page cache.
*/
- ret = generic_check_addressable(sb->s_blocksize_bits,
+ err = generic_check_addressable(sb->s_blocksize_bits,
ext4_blocks_count(es));
- if (ret) {
+ if (err) {
ext4_msg(sb, KERN_ERR, "filesystem"
" too large to mount safely on this system");
if (sizeof(sector_t) < 8)
ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled");
+ ret = err;
goto failed_mount;
}
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/module.h>
+#include <linux/compat.h>
static const struct file_operations fuse_direct_io_file_operations;
void fuse_finish_open(struct inode *inode, struct file *file)
{
struct fuse_file *ff = file->private_data;
+ struct fuse_conn *fc = get_fuse_conn(inode);
if (ff->open_flags & FOPEN_DIRECT_IO)
file->f_op = &fuse_direct_io_file_operations;
invalidate_inode_pages2(inode->i_mapping);
if (ff->open_flags & FOPEN_NONSEEKABLE)
nonseekable_open(inode, file);
+ if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
+ struct fuse_inode *fi = get_fuse_inode(inode);
+
+ spin_lock(&fc->lock);
+ fi->attr_version = ++fc->attr_version;
+ i_size_write(inode, 0);
+ spin_unlock(&fc->lock);
+ fuse_invalidate_attr(inode);
+ }
}
int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
return 0;
}
+/*
+ * CUSE servers compiled on 32bit broke on 64bit kernels because the
+ * ABI was defined to be 'struct iovec' which is different on 32bit
+ * and 64bit. Fortunately we can determine which structure the server
+ * used from the size of the reply.
+ */
+static int fuse_copy_ioctl_iovec(struct iovec *dst, void *src,
+ size_t transferred, unsigned count,
+ bool is_compat)
+{
+#ifdef CONFIG_COMPAT
+ if (count * sizeof(struct compat_iovec) == transferred) {
+ struct compat_iovec *ciov = src;
+ unsigned i;
+
+ /*
+ * With this interface a 32bit server cannot support
+ * non-compat (i.e. ones coming from 64bit apps) ioctl
+ * requests
+ */
+ if (!is_compat)
+ return -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ dst[i].iov_base = compat_ptr(ciov[i].iov_base);
+ dst[i].iov_len = ciov[i].iov_len;
+ }
+ return 0;
+ }
+#endif
+
+ if (count * sizeof(struct iovec) != transferred)
+ return -EIO;
+
+ memcpy(dst, src, transferred);
+ return 0;
+}
+
+/* Make sure iov_length() won't overflow */
+static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count)
+{
+ size_t n;
+ u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT;
+
+ for (n = 0; n < count; n++) {
+ if (iov->iov_len > (size_t) max)
+ return -ENOMEM;
+ max -= iov->iov_len;
+ }
+ return 0;
+}
+
/*
* For ioctls, there is no generic way to determine how much memory
* needs to be read and/or written. Furthermore, ioctls are allowed
in_iovs + out_iovs > FUSE_IOCTL_MAX_IOV)
goto out;
- err = -EIO;
- if ((in_iovs + out_iovs) * sizeof(struct iovec) != transferred)
- goto out;
-
- /* okay, copy in iovs and retry */
vaddr = kmap_atomic(pages[0], KM_USER0);
- memcpy(page_address(iov_page), vaddr, transferred);
+ err = fuse_copy_ioctl_iovec(page_address(iov_page), vaddr,
+ transferred, in_iovs + out_iovs,
+ (flags & FUSE_IOCTL_COMPAT) != 0);
kunmap_atomic(vaddr, KM_USER0);
+ if (err)
+ goto out;
in_iov = page_address(iov_page);
out_iov = in_iov + in_iovs;
+ err = fuse_verify_ioctl_iov(in_iov, in_iovs);
+ if (err)
+ goto out;
+
+ err = fuse_verify_ioctl_iov(out_iov, out_iovs);
+ if (err)
+ goto out;
+
goto retry;
}
struct gfs2_inum_host *inum)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
- struct gfs2_holder i_gh;
struct inode *inode;
struct dentry *dentry;
- int error;
inode = gfs2_ilookup(sb, inum->no_addr);
if (inode) {
goto out_inode;
}
- error = gfs2_glock_nq_num(sdp, inum->no_addr, &gfs2_inode_glops,
- LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- if (error)
- return ERR_PTR(error);
-
- error = gfs2_check_blk_type(sdp, inum->no_addr, GFS2_BLKST_DINODE);
- if (error)
- goto fail;
-
- inode = gfs2_inode_lookup(sb, DT_UNKNOWN, inum->no_addr, 0);
- if (IS_ERR(inode)) {
- error = PTR_ERR(inode);
- goto fail;
- }
-
- error = gfs2_inode_refresh(GFS2_I(inode));
- if (error) {
- iput(inode);
- goto fail;
- }
-
- /* Pick up the works we bypass in gfs2_inode_lookup */
- if (inode->i_state & I_NEW)
- gfs2_set_iop(inode);
-
- if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
- iput(inode);
- goto fail;
- }
-
- error = -EIO;
- if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM) {
- iput(inode);
- goto fail;
- }
-
- gfs2_glock_dq_uninit(&i_gh);
+ inode = gfs2_lookup_by_inum(sdp, inum->no_addr, &inum->no_formal_ino,
+ GFS2_BLKST_DINODE);
+ if (IS_ERR(inode))
+ return ERR_CAST(inode);
out_inode:
dentry = d_obtain_alias(inode);
if (!IS_ERR(dentry))
dentry->d_op = &gfs2_dops;
return dentry;
-fail:
- gfs2_glock_dq_uninit(&i_gh);
- return ERR_PTR(error);
}
static struct dentry *gfs2_fh_to_dentry(struct super_block *sb, struct fid *fid,
{
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
struct gfs2_sbd *sdp = gl->gl_sbd;
- struct gfs2_inode *ip = NULL;
+ struct gfs2_inode *ip;
struct inode *inode;
- u64 no_addr = 0;
+ u64 no_addr = gl->gl_name.ln_number;
+
+ ip = gl->gl_object;
+ /* Note: Unsafe to dereference ip as we don't hold right refs/locks */
- spin_lock(&gl->gl_spin);
- ip = (struct gfs2_inode *)gl->gl_object;
if (ip)
- no_addr = ip->i_no_addr;
- spin_unlock(&gl->gl_spin);
- if (ip) {
inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
- if (inode) {
- d_prune_aliases(inode);
- iput(inode);
- }
+ else
+ inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
+ if (inode && !IS_ERR(inode)) {
+ d_prune_aliases(inode);
+ iput(inode);
}
gfs2_glock_put(gl);
}
return iget5_locked(sb, hash, iget_test, iget_set, &no_addr);
}
-struct gfs2_skip_data {
- u64 no_addr;
- int skipped;
-};
-
-static int iget_skip_test(struct inode *inode, void *opaque)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_skip_data *data = opaque;
-
- if (ip->i_no_addr == data->no_addr) {
- if (inode->i_state & (I_FREEING|I_WILL_FREE)){
- data->skipped = 1;
- return 0;
- }
- return 1;
- }
- return 0;
-}
-
-static int iget_skip_set(struct inode *inode, void *opaque)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_skip_data *data = opaque;
-
- if (data->skipped)
- return 1;
- inode->i_ino = (unsigned long)(data->no_addr);
- ip->i_no_addr = data->no_addr;
- return 0;
-}
-
-static struct inode *gfs2_iget_skip(struct super_block *sb,
- u64 no_addr)
-{
- struct gfs2_skip_data data;
- unsigned long hash = (unsigned long)no_addr;
-
- data.no_addr = no_addr;
- data.skipped = 0;
- return iget5_locked(sb, hash, iget_skip_test, iget_skip_set, &data);
-}
-
/**
* GFS2 lookup code fills in vfs inode contents based on info obtained
* from directory entry inside gfs2_inode_lookup(). This has caused issues
return ERR_PTR(error);
}
-/**
- * gfs2_process_unlinked_inode - Lookup an unlinked inode for reclamation
- * and try to reclaim it by doing iput.
- *
- * This function assumes no rgrp locks are currently held.
- *
- * @sb: The super block
- * no_addr: The inode number
- *
- */
-
-void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
+struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+ u64 *no_formal_ino, unsigned int blktype)
{
- struct gfs2_sbd *sdp;
- struct gfs2_inode *ip;
- struct gfs2_glock *io_gl = NULL;
- int error;
- struct gfs2_holder gh;
+ struct super_block *sb = sdp->sd_vfs;
+ struct gfs2_holder i_gh;
struct inode *inode;
+ int error;
- inode = gfs2_iget_skip(sb, no_addr);
-
- if (!inode)
- return;
-
- /* If it's not a new inode, someone's using it, so leave it alone. */
- if (!(inode->i_state & I_NEW)) {
- iput(inode);
- return;
- }
-
- ip = GFS2_I(inode);
- sdp = GFS2_SB(inode);
- ip->i_no_formal_ino = -1;
+ error = gfs2_glock_nq_num(sdp, no_addr, &gfs2_inode_glops,
+ LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+ if (error)
+ return ERR_PTR(error);
- error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
- if (unlikely(error))
+ error = gfs2_check_blk_type(sdp, no_addr, blktype);
+ if (error)
goto fail;
- ip->i_gl->gl_object = ip;
- error = gfs2_glock_get(sdp, no_addr, &gfs2_iopen_glops, CREATE, &io_gl);
- if (unlikely(error))
- goto fail_put;
-
- set_bit(GIF_INVALID, &ip->i_flags);
- error = gfs2_glock_nq_init(io_gl, LM_ST_SHARED, LM_FLAG_TRY | GL_EXACT,
- &ip->i_iopen_gh);
- if (unlikely(error))
- goto fail_iopen;
+ inode = gfs2_inode_lookup(sb, DT_UNKNOWN, no_addr, 0);
+ if (IS_ERR(inode))
+ goto fail;
- ip->i_iopen_gh.gh_gl->gl_object = ip;
- gfs2_glock_put(io_gl);
- io_gl = NULL;
+ error = gfs2_inode_refresh(GFS2_I(inode));
+ if (error)
+ goto fail_iput;
- inode->i_mode = DT2IF(DT_UNKNOWN);
+ /* Pick up the works we bypass in gfs2_inode_lookup */
+ if (inode->i_state & I_NEW)
+ gfs2_set_iop(inode);
- /*
- * We must read the inode in order to work out its type in
- * this case. Note that this doesn't happen often as we normally
- * know the type beforehand. This code path only occurs during
- * unlinked inode recovery (where it is safe to do this glock,
- * which is not true in the general case).
- */
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, LM_FLAG_TRY,
- &gh);
- if (unlikely(error))
- goto fail_glock;
+ /* Two extra checks for NFS only */
+ if (no_formal_ino) {
+ error = -ESTALE;
+ if (GFS2_I(inode)->i_no_formal_ino != *no_formal_ino)
+ goto fail_iput;
- /* Inode is now uptodate */
- gfs2_glock_dq_uninit(&gh);
- gfs2_set_iop(inode);
+ error = -EIO;
+ if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM)
+ goto fail_iput;
- /* The iput will cause it to be deleted. */
- iput(inode);
- return;
+ error = 0;
+ }
-fail_glock:
- gfs2_glock_dq(&ip->i_iopen_gh);
-fail_iopen:
- if (io_gl)
- gfs2_glock_put(io_gl);
-fail_put:
- ip->i_gl->gl_object = NULL;
- gfs2_glock_put(ip->i_gl);
fail:
- iget_failed(inode);
- return;
+ gfs2_glock_dq_uninit(&i_gh);
+ return error ? ERR_PTR(error) : inode;
+fail_iput:
+ iput(inode);
+ goto fail;
}
static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
extern void gfs2_set_iop(struct inode *inode);
extern struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type,
u64 no_addr, u64 no_formal_ino);
-extern void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr);
+extern struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+ u64 *no_formal_ino,
+ unsigned int blktype);
extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
extern int gfs2_inode_refresh(struct gfs2_inode *ip);
struct fs_disk_quota *fdq)
{
struct inode *inode = &ip->i_inode;
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
struct address_space *mapping = inode->i_mapping;
unsigned long index = loc >> PAGE_CACHE_SHIFT;
unsigned offset = loc & (PAGE_CACHE_SIZE - 1);
qd->qd_qb.qb_value = qp->qu_value;
if (fdq) {
if (fdq->d_fieldmask & FS_DQ_BSOFT) {
- qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit);
+ qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift);
qd->qd_qb.qb_warn = qp->qu_warn;
}
if (fdq->d_fieldmask & FS_DQ_BHARD) {
- qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit);
+ qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift);
qd->qd_qb.qb_limit = qp->qu_limit;
}
}
fdq->d_version = FS_DQUOT_VERSION;
fdq->d_flags = (type == QUOTA_USER) ? FS_USER_QUOTA : FS_GROUP_QUOTA;
fdq->d_id = id;
- fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit);
- fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn);
- fdq->d_bcount = be64_to_cpu(qlvb->qb_value);
+ fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit) << sdp->sd_fsb2bb_shift;
+ fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn) << sdp->sd_fsb2bb_shift;
+ fdq->d_bcount = be64_to_cpu(qlvb->qb_value) << sdp->sd_fsb2bb_shift;
gfs2_glock_dq_uninit(&q_gh);
out:
/* If nothing has changed, this is a no-op */
if ((fdq->d_fieldmask & FS_DQ_BSOFT) &&
- (fdq->d_blk_softlimit == be64_to_cpu(qd->qd_qb.qb_warn)))
+ ((fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_warn)))
fdq->d_fieldmask ^= FS_DQ_BSOFT;
if ((fdq->d_fieldmask & FS_DQ_BHARD) &&
- (fdq->d_blk_hardlimit == be64_to_cpu(qd->qd_qb.qb_limit)))
+ ((fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_limit)))
fdq->d_fieldmask ^= FS_DQ_BHARD;
if (fdq->d_fieldmask == 0)
goto out_i;
* The inode, if one has been found, in inode.
*/
-static u64 try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
- u64 skip)
+static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip)
{
u32 goal = 0, block;
u64 no_addr;
struct gfs2_sbd *sdp = rgd->rd_sbd;
unsigned int n;
+ struct gfs2_glock *gl;
+ struct gfs2_inode *ip;
+ int error;
+ int found = 0;
- for(;;) {
- if (goal >= rgd->rd_data)
- break;
+ while (goal < rgd->rd_data) {
down_write(&sdp->sd_log_flush_lock);
n = 1;
block = rgblk_search(rgd, goal, GFS2_BLKST_UNLINKED,
if (no_addr == skip)
continue;
*last_unlinked = no_addr;
- return no_addr;
+
+ error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &gl);
+ if (error)
+ continue;
+
+ /* If the inode is already in cache, we can ignore it here
+ * because the existing inode disposal code will deal with
+ * it when all refs have gone away. Accessing gl_object like
+ * this is not safe in general. Here it is ok because we do
+ * not dereference the pointer, and we only need an approx
+ * answer to whether it is NULL or not.
+ */
+ ip = gl->gl_object;
+
+ if (ip || queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+ gfs2_glock_put(gl);
+ else
+ found++;
+
+ /* Limit reclaim to sensible number of tasks */
+ if (found > 2*NR_CPUS)
+ return;
}
rgd->rd_flags &= ~GFS2_RDF_CHECK;
- return 0;
+ return;
}
/**
* Try to acquire rgrp in way which avoids contending with others.
*
* Returns: errno
- * unlinked: the block address of an unlinked block to be reclaimed
*/
-static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
- u64 *last_unlinked)
+static int get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *rgd, *begin = NULL;
int loops = 0;
int error, rg_locked;
- *unlinked = 0;
rgd = gfs2_blk2rgrpd(sdp, ip->i_goal);
while (rgd) {
case 0:
if (try_rgrp_fit(rgd, al))
goto out;
- /* If the rg came in already locked, there's no
- way we can recover from a failed try_rgrp_unlink
- because that would require an iput which can only
- happen after the rgrp is unlocked. */
- if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
- *unlinked = try_rgrp_unlink(rgd, last_unlinked,
- ip->i_no_addr);
+ if (rgd->rd_flags & GFS2_RDF_CHECK)
+ try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
- if (*unlinked)
- return -EAGAIN;
/* fall through */
case GLR_TRYFAILED:
rgd = recent_rgrp_next(rgd);
case 0:
if (try_rgrp_fit(rgd, al))
goto out;
- if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
- *unlinked = try_rgrp_unlink(rgd, last_unlinked,
- ip->i_no_addr);
+ if (rgd->rd_flags & GFS2_RDF_CHECK)
+ try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
- if (*unlinked)
- return -EAGAIN;
break;
case GLR_TRYFAILED:
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_alloc *al = ip->i_alloc;
int error = 0;
- u64 last_unlinked = NO_BLOCK, unlinked;
+ u64 last_unlinked = NO_BLOCK;
+ int tries = 0;
if (gfs2_assert_warn(sdp, al->al_requested))
return -EINVAL;
-try_again:
if (hold_rindex) {
/* We need to hold the rindex unless the inode we're using is
the rindex itself, in which case it's already held. */
else if (!sdp->sd_rgrps) /* We may not have the rindex read
in, so: */
error = gfs2_ri_update_special(ip);
+ if (error)
+ return error;
}
- if (error)
- return error;
+ do {
+ error = get_local_rgrp(ip, &last_unlinked);
+ /* If there is no space, flushing the log may release some */
+ if (error)
+ gfs2_log_flush(sdp, NULL);
+ } while (error && tries++ < 3);
- /* Find an rgrp suitable for allocation. If it encounters any unlinked
- dinodes along the way, error will equal -EAGAIN and unlinked will
- contains it block address. We then need to look up that inode and
- try to free it, and try the allocation again. */
- error = get_local_rgrp(ip, &unlinked, &last_unlinked);
if (error) {
if (hold_rindex && ip != GFS2_I(sdp->sd_rindex))
gfs2_glock_dq_uninit(&al->al_ri_gh);
- if (error != -EAGAIN)
- return error;
-
- gfs2_process_unlinked_inode(ip->i_inode.i_sb, unlinked);
- /* regardless of whether or not gfs2_process_unlinked_inode
- was successful, we don't want to repeat it again. */
- last_unlinked = unlinked;
- gfs2_log_flush(sdp, NULL);
- error = 0;
-
- goto try_again;
+ return error;
}
+
/* no error, so we have the rgrp set in the inode's allocation. */
al->al_file = file;
al->al_line = line;
#include <linux/syscalls.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
#include <linux/capability.h>
#include <linux/file.h>
#include <linux/fs.h>
return thaw_super(sb);
}
-static int ioctl_fstrim(struct file *filp, void __user *argp)
-{
- struct super_block *sb = filp->f_path.dentry->d_inode->i_sb;
- struct fstrim_range range;
- int ret = 0;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- /* If filesystem doesn't support trim feature, return. */
- if (sb->s_op->trim_fs == NULL)
- return -EOPNOTSUPP;
-
- /* If a blockdevice-backed filesystem isn't specified, return EINVAL. */
- if (sb->s_bdev == NULL)
- return -EINVAL;
-
- if (argp == NULL) {
- range.start = 0;
- range.len = ULLONG_MAX;
- range.minlen = 0;
- } else if (copy_from_user(&range, argp, sizeof(range)))
- return -EFAULT;
-
- ret = sb->s_op->trim_fs(sb, &range);
- if (ret < 0)
- return ret;
-
- if ((argp != NULL) &&
- (copy_to_user(argp, &range, sizeof(range))))
- return -EFAULT;
-
- return 0;
-}
-
/*
* When you add any new common ioctls to the switches above and below
* please update compat_sys_ioctl() too.
error = ioctl_fsthaw(filp);
break;
- case FITRIM:
- error = ioctl_fstrim(filp, argp);
- break;
-
case FS_IOC_FIEMAP:
return ioctl_fiemap(filp, arg);
}
ret = -ESRCH;
- /*
- * We want IOPRIO_WHO_PGRP/IOPRIO_WHO_USER to be "atomic",
- * so we can't use rcu_read_lock(). See re-copy of ->ioprio
- * in copy_process().
- */
- read_lock(&tasklist_lock);
+ rcu_read_lock();
switch (which) {
case IOPRIO_WHO_PROCESS:
- rcu_read_lock();
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = set_task_ioprio(p, ioprio);
- rcu_read_unlock();
break;
case IOPRIO_WHO_PGRP:
if (!who)
break;
do_each_thread(g, p) {
- int match;
-
- rcu_read_lock();
- match = __task_cred(p)->uid == who;
- rcu_read_unlock();
- if (!match)
+ if (__task_cred(p)->uid != who)
continue;
ret = set_task_ioprio(p, ioprio);
if (ret)
ret = -EINVAL;
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return ret;
}
int ret = -ESRCH;
int tmpio;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
switch (which) {
case IOPRIO_WHO_PROCESS:
- rcu_read_lock();
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = get_task_ioprio(p);
- rcu_read_unlock();
break;
case IOPRIO_WHO_PGRP:
if (!who)
break;
do_each_thread(g, p) {
- int match;
-
- rcu_read_lock();
- match = __task_cred(p)->uid == user->uid;
- rcu_read_unlock();
- if (!match)
+ if (__task_cred(p)->uid != user->uid)
continue;
tmpio = get_task_ioprio(p);
if (tmpio < 0)
ret = -EINVAL;
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return ret;
}
/* journal descriptor can store up to n blocks -bzzz */
journal->j_blocksize = blocksize;
+ journal->j_dev = bdev;
+ journal->j_fs_dev = fs_dev;
+ journal->j_blk_offset = start;
+ journal->j_maxlen = len;
+ bdevname(journal->j_dev, journal->j_devname);
+ p = journal->j_devname;
+ while ((p = strchr(p, '/')))
+ *p = '!';
jbd2_stats_proc_init(journal);
n = journal->j_blocksize / sizeof(journal_block_tag_t);
journal->j_wbufsize = n;
__func__);
goto out_err;
}
- journal->j_dev = bdev;
- journal->j_fs_dev = fs_dev;
- journal->j_blk_offset = start;
- journal->j_maxlen = len;
- bdevname(journal->j_dev, journal->j_devname);
- p = journal->j_devname;
- while ((p = strchr(p, '/')))
- *p = '!';
bh = __getblk(journal->j_dev, start, journal->j_blocksize);
if (!bh) {
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/svc.h>
#include <linux/lockd/lockd.h>
-#include <linux/smp_lock.h>
#include <linux/kthread.h>
#define NLMDBG_FACILITY NLMDBG_CLIENT
*/
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/errno.h>
continue;
if (host->h_server != ni->server)
continue;
- if (ni->server &&
+ if (ni->server && ni->src_len != 0 &&
!rpc_cmp_addr(nlm_srcaddr(host), ni->src_sap))
continue;
host->h_addrlen = ni->salen;
rpc_set_port(nlm_addr(host), 0);
memcpy(nlm_srcaddr(host), ni->src_sap, ni->src_len);
+ host->h_srcaddrlen = ni->src_len;
host->h_version = ni->version;
host->h_proto = ni->protocol;
host->h_rpcclnt = NULL;
const char *hostname,
int noresvport)
{
- const struct sockaddr source = {
- .sa_family = AF_UNSPEC,
- };
struct nlm_lookup_host_info ni = {
.server = 0,
.sap = sap,
.version = version,
.hostname = hostname,
.hostname_len = strlen(hostname),
- .src_sap = &source,
- .src_len = sizeof(source),
.noresvport = noresvport,
};
.protocol = host->h_proto,
.address = nlm_addr(host),
.addrsize = host->h_addrlen,
- .saddress = nlm_srcaddr(host),
.timeout = &timeparms,
.servername = host->h_name,
.program = &nlm_program,
args.flags |= RPC_CLNT_CREATE_HARDRTRY;
if (host->h_noresvport)
args.flags |= RPC_CLNT_CREATE_NONPRIVPORT;
+ if (host->h_srcaddrlen)
+ args.saddress = nlm_srcaddr(host);
clnt = rpc_create(&args);
if (!IS_ERR(clnt))
#include <linux/types.h>
#include <linux/time.h>
-#include <linux/smp_lock.h>
#include <linux/lockd/lockd.h>
#include <linux/lockd/share.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/svc.h>
#include <linux/lockd/nlm.h>
#include <linux/types.h>
#include <linux/time.h>
-#include <linux/smp_lock.h>
#include <linux/lockd/lockd.h>
#include <linux/lockd/share.h>
#include <linux/module.h>
#include <linux/security.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/time.h>
#include <linux/rcupdate.h>
super->s_journal_seg[i] = segno;
super->s_journal_ec[i] = ec;
logfs_set_segment_reserved(sb, segno);
- err = btree_insert32(head, segno, (void *)1, GFP_KERNEL);
+ err = btree_insert32(head, segno, (void *)1, GFP_NOFS);
BUG_ON(err); /* mempool should prevent this */
err = logfs_erase_segment(sb, segno, 1);
BUG_ON(err); /* FIXME: remount-ro would be nicer */
/* FIXME: transaction is part of logfs_block now. Is that enough? */
err = logfs_write_buf(master_inode, page, 0);
+ if (err)
+ move_page_to_inode(inode, page);
+
logfs_put_write_page(page);
return err;
}
if (!(open_flag & O_CREAT))
mode = 0;
+ /* Must never be set by userspace */
+ open_flag &= ~FMODE_NONOTIFY;
+
/*
* O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only
* check for O_DSYNC if the need any syncing at all we enforce it's
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/percpu.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/acct.h>
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
-#include <linux/smp_lock.h>
#include <linux/ncp_fs.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/ncp_fs.h>
#include "ncplib_kernel.h"
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/vfs.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/slab.h>
#include <linux/highuid.h>
-#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/completion.h>
#include <linux/ip.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/svcsock.h>
#include <linux/nfs_fs.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/nfs4.h>
#include <linux/mount.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
+#include <linux/kmemleak.h>
#include "delegation.h"
#include "iostat.h"
struct inode *, struct dentry *);
static int nfs_fsync_dir(struct file *, int);
static loff_t nfs_llseek_dir(struct file *, loff_t, int);
-static int nfs_readdir_clear_array(struct page*, gfp_t);
+static void nfs_readdir_clear_array(struct page*);
const struct file_operations nfs_dir_operations = {
.llseek = nfs_llseek_dir,
.setattr = nfs_setattr,
};
-const struct address_space_operations nfs_dir_addr_space_ops = {
- .releasepage = nfs_readdir_clear_array,
+const struct address_space_operations nfs_dir_aops = {
+ .freepage = nfs_readdir_clear_array,
};
#ifdef CONFIG_NFS_V3
u64 cookie;
u64 ino;
struct qstr string;
+ unsigned char d_type;
};
struct nfs_cache_array {
struct nfs_cache_array_entry array[0];
};
-#define MAX_READDIR_ARRAY ((PAGE_SIZE - sizeof(struct nfs_cache_array)) / sizeof(struct nfs_cache_array_entry))
-
typedef __be32 * (*decode_dirent_t)(struct xdr_stream *, struct nfs_entry *, struct nfs_server *, int);
typedef struct {
struct file *file;
struct page *page;
unsigned long page_index;
u64 *dir_cookie;
+ u64 last_cookie;
loff_t current_index;
decode_dirent_t decode;
static
struct nfs_cache_array *nfs_readdir_get_array(struct page *page)
{
+ void *ptr;
if (page == NULL)
return ERR_PTR(-EIO);
- return (struct nfs_cache_array *)kmap(page);
+ ptr = kmap(page);
+ if (ptr == NULL)
+ return ERR_PTR(-ENOMEM);
+ return ptr;
}
static
* we are freeing strings created by nfs_add_to_readdir_array()
*/
static
-int nfs_readdir_clear_array(struct page *page, gfp_t mask)
+void nfs_readdir_clear_array(struct page *page)
{
- struct nfs_cache_array *array = nfs_readdir_get_array(page);
+ struct nfs_cache_array *array;
int i;
+
+ array = kmap_atomic(page, KM_USER0);
for (i = 0; i < array->size; i++)
kfree(array->array[i].string.name);
- nfs_readdir_release_array(page);
- return 0;
+ kunmap_atomic(array, KM_USER0);
}
/*
string->name = kmemdup(name, len, GFP_KERNEL);
if (string->name == NULL)
return -ENOMEM;
+ /*
+ * Avoid a kmemleak false positive. The pointer to the name is stored
+ * in a page cache page which kmemleak does not scan.
+ */
+ kmemleak_not_leak(string->name);
string->hash = full_name_hash(name, len);
return 0;
}
if (IS_ERR(array))
return PTR_ERR(array);
- ret = -EIO;
- if (array->size >= MAX_READDIR_ARRAY)
- goto out;
cache_entry = &array->array[array->size];
+
+ /* Check that this entry lies within the page bounds */
+ ret = -ENOSPC;
+ if ((char *)&cache_entry[1] - (char *)page_address(page) > PAGE_SIZE)
+ goto out;
+
cache_entry->cookie = entry->prev_cookie;
cache_entry->ino = entry->ino;
+ cache_entry->d_type = entry->d_type;
ret = nfs_readdir_make_qstr(&cache_entry->string, entry->name, entry->len);
if (ret)
goto out;
array->last_cookie = entry->cookie;
- if (entry->eof == 1)
- array->eof_index = array->size;
array->size++;
+ if (entry->eof != 0)
+ array->eof_index = array->size;
out:
nfs_readdir_release_array(page);
return ret;
if (diff < 0)
goto out_eof;
if (diff >= array->size) {
- if (array->eof_index > 0)
+ if (array->eof_index >= 0)
goto out_eof;
desc->current_index += array->size;
return -EAGAIN;
index = (unsigned int)diff;
*desc->dir_cookie = array->array[index].cookie;
desc->cache_entry_index = index;
- if (index == array->eof_index)
- desc->eof = 1;
return 0;
out_eof:
desc->eof = 1;
int status = -EAGAIN;
for (i = 0; i < array->size; i++) {
- if (i == array->eof_index) {
- desc->eof = 1;
- status = -EBADCOOKIE;
- }
if (array->array[i].cookie == *desc->dir_cookie) {
desc->cache_entry_index = i;
- status = 0;
- break;
+ return 0;
}
}
-
+ if (array->eof_index >= 0) {
+ status = -EBADCOOKIE;
+ if (*desc->dir_cookie == array->last_cookie)
+ desc->eof = 1;
+ }
return status;
}
int nfs_readdir_search_array(nfs_readdir_descriptor_t *desc)
{
struct nfs_cache_array *array;
- int status = -EBADCOOKIE;
-
- if (desc->dir_cookie == NULL)
- goto out;
+ int status;
array = nfs_readdir_get_array(desc->page);
if (IS_ERR(array)) {
else
status = nfs_readdir_search_for_cookie(array, desc);
+ if (status == -EAGAIN) {
+ desc->last_cookie = array->last_cookie;
+ desc->page_index++;
+ }
nfs_readdir_release_array(desc->page);
out:
return status;
static
int nfs_same_file(struct dentry *dentry, struct nfs_entry *entry)
{
- struct nfs_inode *node;
if (dentry->d_inode == NULL)
goto different;
- node = NFS_I(dentry->d_inode);
- if (node->fh.size != entry->fh->size)
- goto different;
- if (strncmp(node->fh.data, entry->fh->data, node->fh.size) != 0)
+ if (nfs_compare_fh(entry->fh, NFS_FH(dentry->d_inode)) != 0)
goto different;
return 1;
different:
/* Perform conversion from xdr to cache array */
static
-void nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry,
+int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry,
void *xdr_page, struct page *page, unsigned int buflen)
{
struct xdr_stream stream;
struct xdr_buf buf;
__be32 *ptr = xdr_page;
- int status;
struct nfs_cache_array *array;
+ unsigned int count = 0;
+ int status;
buf.head->iov_base = xdr_page;
buf.head->iov_len = buflen;
do {
status = xdr_decode(desc, entry, &stream);
- if (status != 0)
+ if (status != 0) {
+ if (status == -EAGAIN)
+ status = 0;
break;
+ }
- if (nfs_readdir_add_to_array(entry, page) == -1)
- break;
- if (desc->plus == 1)
+ count++;
+
+ if (desc->plus != 0)
nfs_prime_dcache(desc->file->f_path.dentry, entry);
+
+ status = nfs_readdir_add_to_array(entry, page);
+ if (status != 0)
+ break;
} while (!entry->eof);
- if (status == -EBADCOOKIE && entry->eof) {
+ if (count == 0 || (status == -EBADCOOKIE && entry->eof != 0)) {
array = nfs_readdir_get_array(page);
- array->eof_index = array->size - 1;
- status = 0;
- nfs_readdir_release_array(page);
+ if (!IS_ERR(array)) {
+ array->eof_index = array->size;
+ status = 0;
+ nfs_readdir_release_array(page);
+ } else
+ status = PTR_ERR(array);
}
+ return status;
}
static
struct nfs_entry entry;
struct file *file = desc->file;
struct nfs_cache_array *array;
- int status = 0;
+ int status = -ENOMEM;
unsigned int array_size = ARRAY_SIZE(pages);
entry.prev_cookie = 0;
- entry.cookie = *desc->dir_cookie;
+ entry.cookie = desc->last_cookie;
entry.eof = 0;
entry.fh = nfs_alloc_fhandle();
entry.fattr = nfs_alloc_fattr();
goto out;
array = nfs_readdir_get_array(page);
+ if (IS_ERR(array)) {
+ status = PTR_ERR(array);
+ goto out;
+ }
memset(array, 0, sizeof(struct nfs_cache_array));
array->eof_index = -1;
if (!pages_ptr)
goto out_release_array;
do {
+ unsigned int pglen;
status = nfs_readdir_xdr_filler(pages, desc, &entry, file, inode);
if (status < 0)
break;
- nfs_readdir_page_filler(desc, &entry, pages_ptr, page, array_size * PAGE_SIZE);
- } while (array->eof_index < 0 && array->size < MAX_READDIR_ARRAY);
+ pglen = status;
+ status = nfs_readdir_page_filler(desc, &entry, pages_ptr, page, pglen);
+ if (status < 0) {
+ if (status == -ENOSPC)
+ status = 0;
+ break;
+ }
+ } while (array->eof_index < 0);
nfs_readdir_free_large_page(pages_ptr, pages, array_size);
out_release_array:
int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page* page)
{
struct inode *inode = desc->file->f_path.dentry->d_inode;
+ int ret;
- if (nfs_readdir_xdr_to_array(desc, page, inode) < 0)
+ ret = nfs_readdir_xdr_to_array(desc, page, inode);
+ if (ret < 0)
goto error;
SetPageUptodate(page);
return 0;
error:
unlock_page(page);
- return -EIO;
+ return ret;
}
static
void cache_page_release(nfs_readdir_descriptor_t *desc)
{
+ if (!desc->page->mapping)
+ nfs_readdir_clear_array(desc->page);
page_cache_release(desc->page);
desc->page = NULL;
}
static
struct page *get_cache_page(nfs_readdir_descriptor_t *desc)
{
- struct page *page;
- page = read_cache_page(desc->file->f_path.dentry->d_inode->i_mapping,
+ return read_cache_page(desc->file->f_path.dentry->d_inode->i_mapping,
desc->page_index, (filler_t *)nfs_readdir_filler, desc);
- if (IS_ERR(page))
- desc->eof = 1;
- return page;
}
/*
return PTR_ERR(desc->page);
res = nfs_readdir_search_array(desc);
- if (res == 0)
- return 0;
- cache_page_release(desc);
+ if (res != 0)
+ cache_page_release(desc);
return res;
}
static inline
int readdir_search_pagecache(nfs_readdir_descriptor_t *desc)
{
- int res = -EAGAIN;
+ int res;
- while (1) {
- res = find_cache_page(desc);
- if (res != -EAGAIN)
- break;
- desc->page_index++;
+ if (desc->page_index == 0) {
+ desc->current_index = 0;
+ desc->last_cookie = 0;
}
+ do {
+ res = find_cache_page(desc);
+ } while (res == -EAGAIN);
return res;
}
-static inline unsigned int dt_type(struct inode *inode)
-{
- return (inode->i_mode >> 12) & 15;
-}
-
/*
* Once we've found the start of the dirent within a page: fill 'er up...
*/
int i = 0;
int res = 0;
struct nfs_cache_array *array = NULL;
- unsigned int d_type = DT_UNKNOWN;
- struct dentry *dentry = NULL;
array = nfs_readdir_get_array(desc->page);
+ if (IS_ERR(array)) {
+ res = PTR_ERR(array);
+ goto out;
+ }
for (i = desc->cache_entry_index; i < array->size; i++) {
- d_type = DT_UNKNOWN;
+ struct nfs_cache_array_entry *ent;
- res = filldir(dirent, array->array[i].string.name,
- array->array[i].string.len, file->f_pos,
- nfs_compat_user_ino64(array->array[i].ino), d_type);
- if (res < 0)
+ ent = &array->array[i];
+ if (filldir(dirent, ent->string.name, ent->string.len,
+ file->f_pos, nfs_compat_user_ino64(ent->ino),
+ ent->d_type) < 0) {
+ desc->eof = 1;
break;
+ }
file->f_pos++;
- desc->cache_entry_index = i;
if (i < (array->size-1))
*desc->dir_cookie = array->array[i+1].cookie;
else
*desc->dir_cookie = array->last_cookie;
- if (i == array->eof_index) {
- desc->eof = 1;
- break;
- }
}
+ if (array->eof_index >= 0)
+ desc->eof = 1;
nfs_readdir_release_array(desc->page);
+out:
cache_page_release(desc);
- if (dentry != NULL)
- dput(dentry);
dfprintk(DIRCACHE, "NFS: nfs_do_filldir() filling ended @ cookie %Lu; returning = %d\n",
(unsigned long long)*desc->dir_cookie, res);
return res;
goto out;
}
- if (nfs_readdir_xdr_to_array(desc, page, inode) == -1) {
- status = -EIO;
- goto out_release;
- }
-
desc->page_index = 0;
+ desc->last_cookie = *desc->dir_cookie;
desc->page = page;
+
+ status = nfs_readdir_xdr_to_array(desc, page, inode);
+ if (status < 0)
+ goto out_release;
+
status = nfs_do_filldir(desc, dirent, filldir);
out:
struct inode *inode = dentry->d_inode;
nfs_readdir_descriptor_t my_desc,
*desc = &my_desc;
- int res = -ENOMEM;
+ int res;
dfprintk(FILE, "NFS: readdir(%s/%s) starting at cookie %llu\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
if (res < 0)
goto out;
- while (desc->eof != 1) {
+ do {
res = readdir_search_pagecache(desc);
if (res == -EBADCOOKIE) {
+ res = 0;
/* This means either end of directory */
if (*desc->dir_cookie && desc->eof == 0) {
/* Or that the server has 'lost' a cookie */
res = uncached_readdir(desc, dirent, filldir);
- if (res >= 0)
+ if (res == 0)
continue;
}
- res = 0;
break;
}
if (res == -ETOOSMALL && desc->plus) {
break;
res = nfs_do_filldir(desc, dirent, filldir);
- if (res < 0) {
- res = 0;
+ if (res < 0)
break;
- }
- }
+ } while (!desc->eof);
out:
nfs_unblock_sillyrename(dentry);
if (res > 0)
res = NULL;
goto out;
/* This turned out not to be a regular file */
- case -EISDIR:
case -ENOTDIR:
goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
+ /* case -EISDIR: */
/* case -EINVAL: */
default:
res = ERR_CAST(inode);
goto out;
nfs_alloc_commit_data(dreq);
- if (dreq->commit_data == NULL || count < wsize)
+ if (dreq->commit_data == NULL || count <= wsize)
sync = NFS_FILE_SYNC;
dreq->inode = inode;
{
struct inode *inode = filp->f_mapping->host;
int status = 0;
+ unsigned int saved_type = fl->fl_type;
/* Try local locking first */
posix_test_lock(filp, fl);
/* found a conflict */
goto out;
}
+ fl->fl_type = saved_type;
if (nfs_have_delegation(inode, FMODE_READ))
goto out_noconflict;
} else if (S_ISDIR(inode->i_mode)) {
inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->dir_inode_ops;
inode->i_fop = &nfs_dir_operations;
+ inode->i_data.a_ops = &nfs_dir_aops;
if (nfs_server_capable(inode, NFS_CAP_READDIRPLUS))
set_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
/* Deal with crossing mountpoints */
return 0;
}
+/*
+ * Convert a umode to a dirent->d_type
+ */
+static inline
+unsigned char nfs_umode_to_dtype(umode_t mode)
+{
+ return (mode >> 12) & 15;
+}
+
/*
* Determine the number of pages in an array of length 'len' and
* with a base offset of 'base'
static struct rpc_version mnt_version1 = {
.number = 1,
- .nrprocs = 2,
+ .nrprocs = ARRAY_SIZE(mnt_procedures),
.procs = mnt_procedures,
};
static struct rpc_version mnt_version3 = {
.number = 3,
- .nrprocs = 2,
+ .nrprocs = ARRAY_SIZE(mnt3_procedures),
.procs = mnt3_procedures,
};
struct page **page;
size_t hdrlen;
unsigned int pglen, recvd;
- int status, nr = 0;
+ int status;
if ((status = ntohl(*p++)))
return nfs_stat_to_errno(status);
if (pglen > recvd)
pglen = recvd;
page = rcvbuf->pages;
- return nr;
+ return pglen;
}
static void print_overflow_msg(const char *func, const struct xdr_stream *xdr)
entry->prev_cookie = entry->cookie;
entry->cookie = ntohl(*p++);
+ entry->d_type = DT_UNKNOWN;
+
p = xdr_inline_peek(xdr, 8);
if (p != NULL)
entry->eof = !p[0] && p[1];
out_overflow:
print_overflow_msg(__func__, xdr);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EAGAIN);
}
/*
struct page **page;
size_t hdrlen;
u32 recvd, pglen;
- int status, nr = 0;
+ int status;
status = ntohl(*p++);
/* Decode post_op_attrs */
pglen = recvd;
page = rcvbuf->pages;
- return nr;
+ return pglen;
}
__be32 *
entry->prev_cookie = entry->cookie;
p = xdr_decode_hyper(p, &entry->cookie);
+ entry->d_type = DT_UNKNOWN;
if (plus) {
entry->fattr->valid = 0;
p = xdr_decode_post_op_attr_stream(xdr, entry->fattr);
if (IS_ERR(p))
goto out_overflow_exit;
+ entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
/* In fact, a post_op_fh3: */
p = xdr_inline_decode(xdr, 4);
if (unlikely(!p))
out_overflow:
print_overflow_msg(__func__, xdr);
out_overflow_exit:
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EAGAIN);
}
/*
nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
res.pgbase = args.pgbase;
status = nfs4_call_sync(NFS_SERVER(dir), &msg, &args, &res, 0);
- if (status == 0)
+ if (status >= 0) {
memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+ status += args.pgbase;
+ }
nfs_invalidate_atime(dir);
ret = nfs_revalidate_inode(server, inode);
if (ret < 0)
return ret;
+ if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
+ nfs_zap_acl_cache(inode);
ret = nfs4_read_cached_acl(inode, buf, buflen);
if (ret != -ENOENT)
return ret;
nfs_inode_return_delegation(inode);
buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
+ /*
+ * Acl update can result in inode attribute update.
+ * so mark the attribute cache invalid.
+ */
+ spin_lock(&inode->i_lock);
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR;
+ spin_unlock(&inode->i_lock);
nfs_access_zap_cache(inode);
nfs_zap_acl_cache(inode);
return ret;
xdr_read_pages(xdr, pglen);
- return 0;
+ return pglen;
}
static int decode_readlink(struct xdr_stream *xdr, struct rpc_rqst *req)
if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID)
entry->ino = entry->fattr->fileid;
+ entry->d_type = DT_UNKNOWN;
+ if (entry->fattr->valid & NFS_ATTR_FATTR_TYPE)
+ entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
+
if (verify_attr_len(xdr, p, len) < 0)
goto out_overflow;
out_overflow:
print_overflow_msg(__func__, xdr);
- return ERR_PTR(-EIO);
+ return ERR_PTR(-EAGAIN);
}
/*
{
if (!nfs_lock_request_dontget(req))
return 0;
- if (req->wb_page != NULL)
+ if (test_bit(PG_MAPPED, &req->wb_flags))
radix_tree_tag_set(&NFS_I(req->wb_context->path.dentry->d_inode)->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
return 1;
}
*/
void nfs_clear_page_tag_locked(struct nfs_page *req)
{
- if (req->wb_page != NULL) {
+ if (test_bit(PG_MAPPED, &req->wb_flags)) {
struct inode *inode = req->wb_context->path.dentry->d_inode;
struct nfs_inode *nfsi = NFS_I(inode);
(long long)NFS_FILEID(req->wb_context->path.dentry->d_inode),
req->wb_bytes,
(long long)req_offset(req));
- nfs_clear_request(req);
nfs_release_request(req);
}
#include <linux/nfs_mount.h>
#include <linux/nfs4_mount.h>
#include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/mnt_namespace.h>
#define NFSDBG_FACILITY NFSDBG_VFS
+#ifdef CONFIG_NFS_V3
+#define NFS_DEFAULT_VERSION 3
+#else
+#define NFS_DEFAULT_VERSION 2
+#endif
+
enum {
/* Mount options that take no arguments */
Opt_soft, Opt_hard,
mnt->flags |= NFS_MOUNT_VER3;
mnt->version = 3;
break;
-#ifdef CONFIG_NFS_V4
case Opt_v4:
mnt->flags &= ~NFS_MOUNT_VER3;
mnt->version = 4;
break;
-#endif
case Opt_udp:
mnt->flags &= ~NFS_MOUNT_TCP;
mnt->nfs_server.protocol = XPRT_TRANSPORT_UDP;
mnt->flags |= NFS_MOUNT_VER3;
mnt->version = 3;
break;
-#ifdef CONFIG_NFS_V4
case NFS4_VERSION:
mnt->flags &= ~NFS_MOUNT_VER3;
mnt->version = 4;
break;
-#endif
default:
goto out_invalid_value;
}
};
int error = -ENOMEM;
- data = nfs_alloc_parsed_mount_data(3);
+ data = nfs_alloc_parsed_mount_data(NFS_DEFAULT_VERSION);
mntfh = nfs_alloc_fhandle();
if (data == NULL || mntfh == NULL)
goto out_free_fh;
if (nfs_have_delegation(inode, FMODE_WRITE))
nfsi->change_attr++;
}
+ set_bit(PG_MAPPED, &req->wb_flags);
SetPagePrivate(req->wb_page);
set_page_private(req->wb_page, (unsigned long)req);
nfsi->npages++;
spin_lock(&inode->i_lock);
set_page_private(req->wb_page, 0);
ClearPagePrivate(req->wb_page);
+ clear_bit(PG_MAPPED, &req->wb_flags);
radix_tree_delete(&nfsi->nfs_page_tree, req->wb_index);
nfsi->npages--;
if (!nfsi->npages) {
iput(inode);
} else
spin_unlock(&inode->i_lock);
- nfs_clear_request(req);
nfs_release_request(req);
}
err = vfs_getattr(fhp->fh_export->ex_path.mnt, fhp->fh_dentry,
&fhp->fh_post_attr);
fhp->fh_post_change = fhp->fh_dentry->d_inode->i_version;
- if (err)
+ if (err) {
fhp->fh_post_saved = 0;
- else
+ /* Grab the ctime anyway - set_change_info might use it */
+ fhp->fh_post_attr.ctime = fhp->fh_dentry->d_inode->i_ctime;
+ } else
fhp->fh_post_saved = 1;
}
* Spawn a thread to perform a recall on the delegation represented
* by the lease (file_lock)
*
- * Called from break_lease() with lock_kernel() held.
+ * Called from break_lease() with lock_flocks() held.
* Note: we assume break_lease will only call this *once* for any given
* lease.
*/
list_add_tail(&dp->dl_recall_lru, &del_recall_lru);
spin_unlock(&recall_lock);
- /* only place dl_time is set. protected by lock_kernel*/
+ /* only place dl_time is set. protected by lock_flocks*/
dp->dl_time = get_seconds();
/*
/*
* The file_lock is being reapd.
*
- * Called by locks_free_lock() with lock_kernel() held.
+ * Called by locks_free_lock() with lock_flocks() held.
*/
static
void nfsd_release_deleg_cb(struct file_lock *fl)
}
/*
- * Called from setlease() with lock_kernel() held
+ * Called from setlease() with lock_flocks() held
*/
static
int nfsd_same_client_deleg_cb(struct file_lock *onlist, struct file_lock *try)
static inline void
set_change_info(struct nfsd4_change_info *cinfo, struct svc_fh *fhp)
{
- BUG_ON(!fhp->fh_pre_saved || !fhp->fh_post_saved);
- cinfo->atomic = 1;
+ BUG_ON(!fhp->fh_pre_saved);
+ cinfo->atomic = fhp->fh_post_saved;
cinfo->change_supported = IS_I_VERSION(fhp->fh_dentry->d_inode);
- if (cinfo->change_supported) {
- cinfo->before_change = fhp->fh_pre_change;
- cinfo->after_change = fhp->fh_post_change;
- } else {
- cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
- cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
- cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
- cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
- }
+
+ cinfo->before_change = fhp->fh_pre_change;
+ cinfo->after_change = fhp->fh_post_change;
+ cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
+ cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
+ cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
+ cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
+
}
int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
* the device at this point.
*
* To prevent nilfs_dat_translate() from returning the
- * uncommited block number, this makes a copy of the entry
+ * uncommitted block number, this makes a copy of the entry
* buffer and redirects nilfs_dat_translate() to the copy.
*/
if (!buffer_nilfs_redirected(entry_bh)) {
int nilfs_init_gcinode(struct inode *inode)
{
struct nilfs_inode_info *ii = NILFS_I(inode);
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
inode->i_mode = S_IFREG;
mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
ii->i_flags = 0;
nilfs_bmap_init_gc(ii->i_bmap);
- /*
- * Add the inode to GC inode list. Garbage Collection
- * is serialized and no two processes manipulate the
- * list simultaneously.
- */
- igrab(inode);
- list_add(&NILFS_I(inode)->i_dirty, &nilfs->ns_gc_inodes);
-
return 0;
}
struct nilfs_argv *argv, void *buf)
{
size_t nmembs = argv->v_nmembs;
+ struct the_nilfs *nilfs = NILFS_SB(sb)->s_nilfs;
struct inode *inode;
struct nilfs_vdesc *vdesc;
struct buffer_head *bh, *n;
ino = vdesc->vd_ino;
cno = vdesc->vd_cno;
inode = nilfs_iget_for_gc(sb, ino, cno);
- if (unlikely(inode == NULL)) {
- ret = -ENOMEM;
+ if (IS_ERR(inode)) {
+ ret = PTR_ERR(inode);
goto failed;
}
+ if (list_empty(&NILFS_I(inode)->i_dirty)) {
+ /*
+ * Add the inode to GC inode list. Garbage Collection
+ * is serialized and no two processes manipulate the
+ * list simultaneously.
+ */
+ igrab(inode);
+ list_add(&NILFS_I(inode)->i_dirty,
+ &nilfs->ns_gc_inodes);
+ }
+
do {
ret = nilfs_ioctl_move_inode_block(inode, vdesc,
&buffers);
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- wait_event(group->fanotify_data.access_waitq, event->response);
+ wait_event(group->fanotify_data.access_waitq, event->response ||
+ atomic_read(&group->fanotify_data.bypass_perm));
+
+ if (!event->response) /* bypass_perm set */
+ return 0;
/* userspace responded, convert to something usable */
spin_lock(&event->lock);
return client_fd;
}
-static ssize_t fill_event_metadata(struct fsnotify_group *group,
+static int fill_event_metadata(struct fsnotify_group *group,
struct fanotify_event_metadata *metadata,
struct fsnotify_event *event)
{
+ int ret = 0;
+
pr_debug("%s: group=%p metadata=%p event=%p\n", __func__,
group, metadata, event);
metadata->event_len = FAN_EVENT_METADATA_LEN;
+ metadata->metadata_len = FAN_EVENT_METADATA_LEN;
metadata->vers = FANOTIFY_METADATA_VERSION;
metadata->mask = event->mask & FAN_ALL_OUTGOING_EVENTS;
metadata->pid = pid_vnr(event->tgid);
- metadata->fd = create_fd(group, event);
+ if (unlikely(event->mask & FAN_Q_OVERFLOW))
+ metadata->fd = FAN_NOFD;
+ else {
+ metadata->fd = create_fd(group, event);
+ if (metadata->fd < 0)
+ ret = metadata->fd;
+ }
- return metadata->fd;
+ return ret;
}
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
mutex_lock(&group->fanotify_data.access_mutex);
- if (group->fanotify_data.bypass_perm) {
+ if (atomic_read(&group->fanotify_data.bypass_perm)) {
mutex_unlock(&group->fanotify_data.access_mutex);
kmem_cache_free(fanotify_response_event_cache, re);
event->response = FAN_ALLOW;
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- fd = fill_event_metadata(group, &fanotify_event_metadata, event);
- if (fd < 0)
- return fd;
+ ret = fill_event_metadata(group, &fanotify_event_metadata, event);
+ if (ret < 0)
+ goto out;
+ fd = fanotify_event_metadata.fd;
ret = prepare_for_access_response(group, event, fd);
if (ret)
goto out_close_fd;
ret = -EFAULT;
- if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
+ if (copy_to_user(buf, &fanotify_event_metadata,
+ fanotify_event_metadata.event_len))
goto out_kill_access_response;
- return FAN_EVENT_METADATA_LEN;
+ return fanotify_event_metadata.event_len;
out_kill_access_response:
remove_access_response(group, event, fd);
out_close_fd:
- sys_close(fd);
+ if (fd != FAN_NOFD)
+ sys_close(fd);
+out:
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (event->mask & FAN_ALL_PERM_EVENTS) {
+ event->response = FAN_DENY;
+ wake_up(&group->fanotify_data.access_waitq);
+ }
+#endif
return ret;
}
mutex_lock(&group->fanotify_data.access_mutex);
- group->fanotify_data.bypass_perm = true;
+ atomic_inc(&group->fanotify_data.bypass_perm);
list_for_each_entry_safe(re, lre, &group->fanotify_data.access_list, list) {
pr_debug("%s: found group=%p re=%p event=%p\n", __func__, group,
{
struct fsnotify_mark *fsn_mark;
__u32 added;
+ int ret = 0;
fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
if (!fsn_mark) {
- int ret;
-
if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
return -ENOSPC;
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
- if (ret) {
- fanotify_free_mark(fsn_mark);
- return ret;
- }
+ if (ret)
+ goto err;
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
- fsnotify_put_mark(fsn_mark);
+
if (added & ~mnt->mnt_fsnotify_mask)
fsnotify_recalc_vfsmount_mask(mnt);
-
- return 0;
+err:
+ fsnotify_put_mark(fsn_mark);
+ return ret;
}
static int fanotify_add_inode_mark(struct fsnotify_group *group,
{
struct fsnotify_mark *fsn_mark;
__u32 added;
+ int ret = 0;
pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark) {
- int ret;
-
if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
return -ENOSPC;
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
- if (ret) {
- fanotify_free_mark(fsn_mark);
- return ret;
- }
+ if (ret)
+ goto err;
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
- fsnotify_put_mark(fsn_mark);
+
if (added & ~inode->i_fsnotify_mask)
fsnotify_recalc_inode_mask(inode);
- return 0;
+err:
+ fsnotify_put_mark(fsn_mark);
+ return ret;
}
/* fanotify syscalls */
/* fsnotify_alloc_group takes a ref. Dropped in fanotify_release */
group = fsnotify_alloc_group(&fanotify_fsnotify_ops);
- if (IS_ERR(group))
+ if (IS_ERR(group)) {
+ free_uid(user);
return PTR_ERR(group);
+ }
group->fanotify_data.user = user;
atomic_inc(&user->fanotify_listeners);
mutex_init(&group->fanotify_data.access_mutex);
init_waitqueue_head(&group->fanotify_data.access_waitq);
INIT_LIST_HEAD(&group->fanotify_data.access_list);
+ atomic_set(&group->fanotify_data.bypass_perm, 0);
#endif
switch (flags & FAN_ALL_CLASS_BITS) {
case FAN_CLASS_NOTIF:
if (flags & ~FAN_ALL_MARK_FLAGS)
return -EINVAL;
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
- case FAN_MARK_ADD:
+ case FAN_MARK_ADD: /* fallthrough */
case FAN_MARK_REMOVE:
+ if (!mask)
+ return -EINVAL;
case FAN_MARK_FLUSH:
break;
default:
if (ret >= 0)
return ret;
+ fsnotify_put_group(group);
atomic_dec(&user->inotify_devs);
out_free_uid:
free_uid(user);
/* this io's submitter should not have unlocked this before we could */
BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
+ if (ocfs2_iocb_is_sem_locked(iocb)) {
+ up_read(&inode->i_alloc_sem);
+ ocfs2_iocb_clear_sem_locked(iocb);
+ }
+
ocfs2_iocb_clear_rw_locked(iocb);
level = ocfs2_iocb_rw_locked_level(iocb);
- if (!level)
- up_read(&inode->i_alloc_sem);
ocfs2_rw_unlock(inode, level);
if (is_async)
else
clear_bit(1, (unsigned long *)&iocb->private);
}
+
+/*
+ * Using a named enum representing lock types in terms of #N bit stored in
+ * iocb->private, which is going to be used for communication bewteen
+ * ocfs2_dio_end_io() and ocfs2_file_aio_write/read().
+ */
+enum ocfs2_iocb_lock_bits {
+ OCFS2_IOCB_RW_LOCK = 0,
+ OCFS2_IOCB_RW_LOCK_LEVEL,
+ OCFS2_IOCB_SEM,
+ OCFS2_IOCB_NUM_LOCKS
+};
+
#define ocfs2_iocb_clear_rw_locked(iocb) \
- clear_bit(0, (unsigned long *)&iocb->private)
+ clear_bit(OCFS2_IOCB_RW_LOCK, (unsigned long *)&iocb->private)
#define ocfs2_iocb_rw_locked_level(iocb) \
- test_bit(1, (unsigned long *)&iocb->private)
+ test_bit(OCFS2_IOCB_RW_LOCK_LEVEL, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_set_sem_locked(iocb) \
+ set_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_clear_sem_locked(iocb) \
+ clear_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_is_sem_locked(iocb) \
+ test_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
#endif /* OCFS2_FILE_H */
if (reg == NULL)
return ERR_PTR(-ENOMEM);
- if (strlen(name) > O2HB_MAX_REGION_NAME_LEN)
- return ERR_PTR(-ENAMETOOLONG);
+ if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) {
+ ret = -ENAMETOOLONG;
+ goto free;
+ }
spin_lock(&o2hb_live_lock);
reg->hr_region_num = 0;
O2NM_MAX_REGIONS);
if (reg->hr_region_num >= O2NM_MAX_REGIONS) {
spin_unlock(&o2hb_live_lock);
- return ERR_PTR(-EFBIG);
+ ret = -EFBIG;
+ goto free;
}
set_bit(reg->hr_region_num, o2hb_region_bitmap);
}
ret = o2hb_debug_region_init(reg, o2hb_debug_dir);
if (ret) {
config_item_put(®->hr_item);
- return ERR_PTR(ret);
+ goto free;
}
return ®->hr_item;
+free:
+ kfree(reg);
+ return ERR_PTR(ret);
}
static void o2hb_heartbeat_group_drop_item(struct config_group *group,
define_mask(QUOTA),
define_mask(REFCOUNT),
define_mask(BASTS),
+ define_mask(RESERVATIONS),
+ define_mask(CLUSTER),
define_mask(ERROR),
define_mask(NOTICE),
define_mask(KTHREAD),
- define_mask(RESERVATIONS),
};
static struct attribute *mlog_attr_ptrs[MLOG_MAX_BITS] = {NULL, };
#include <linux/sched.h>
/* bits that are frequently given and infrequently matched in the low word */
-/* NOTE: If you add a flag, you need to also update mlog.c! */
+/* NOTE: If you add a flag, you need to also update masklog.c! */
#define ML_ENTRY 0x0000000000000001ULL /* func call entry */
#define ML_EXIT 0x0000000000000002ULL /* func call exit */
#define ML_TCP 0x0000000000000004ULL /* net cluster/tcp.c */
#define ML_XATTR 0x0000000020000000ULL /* ocfs2 extended attributes */
#define ML_QUOTA 0x0000000040000000ULL /* ocfs2 quota operations */
#define ML_REFCOUNT 0x0000000080000000ULL /* refcount tree operations */
-#define ML_BASTS 0x0000001000000000ULL /* dlmglue asts and basts */
+#define ML_BASTS 0x0000000100000000ULL /* dlmglue asts and basts */
+#define ML_RESERVATIONS 0x0000000200000000ULL /* ocfs2 alloc reservations */
+#define ML_CLUSTER 0x0000000400000000ULL /* cluster stack */
+
/* bits that are infrequently given and frequently matched in the high word */
-#define ML_ERROR 0x0000000100000000ULL /* sent to KERN_ERR */
-#define ML_NOTICE 0x0000000200000000ULL /* setn to KERN_NOTICE */
-#define ML_KTHREAD 0x0000000400000000ULL /* kernel thread activity */
-#define ML_RESERVATIONS 0x0000000800000000ULL /* ocfs2 alloc reservations */
-#define ML_CLUSTER 0x0000001000000000ULL /* cluster stack */
+#define ML_ERROR 0x1000000000000000ULL /* sent to KERN_ERR */
+#define ML_NOTICE 0x2000000000000000ULL /* setn to KERN_NOTICE */
+#define ML_KTHREAD 0x4000000000000000ULL /* kernel thread activity */
#define MLOG_INITIAL_AND_MASK (ML_ERROR|ML_NOTICE)
#define MLOG_INITIAL_NOT_MASK (ML_ENTRY|ML_EXIT)
out:
iput(inode);
- ocfs2_dentry_attach_gen(dentry);
}
/*
di->i_dx_root = cpu_to_le64(dr_blkno);
+ spin_lock(&OCFS2_I(dir)->ip_lock);
OCFS2_I(dir)->ip_dyn_features |= OCFS2_INDEXED_DIR_FL;
di->i_dyn_features = cpu_to_le16(OCFS2_I(dir)->ip_dyn_features);
+ spin_unlock(&OCFS2_I(dir)->ip_lock);
ocfs2_journal_dirty(handle, di_bh);
goto out_commit;
}
+ spin_lock(&OCFS2_I(dir)->ip_lock);
OCFS2_I(dir)->ip_dyn_features &= ~OCFS2_INDEXED_DIR_FL;
di->i_dyn_features = cpu_to_le16(OCFS2_I(dir)->ip_dyn_features);
+ spin_unlock(&OCFS2_I(dir)->ip_lock);
di->i_dx_root = cpu_to_le64(0ULL);
ocfs2_journal_dirty(handle, di_bh);
r += O2HB_MAX_REGION_NAME_LEN;
}
- local = kmalloc(sizeof(qr->qr_regions), GFP_KERNEL);
+ local = kmalloc(sizeof(qr->qr_regions), GFP_ATOMIC);
if (!local) {
status = -ENOMEM;
goto bail;
*/
static int dlm_is_lockres_migrateable(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res,
- int *numlocks)
+ int *numlocks,
+ int *hasrefs)
{
int ret;
int i;
assert_spin_locked(&res->spinlock);
+ *numlocks = 0;
+ *hasrefs = 0;
+
ret = -EINVAL;
if (res->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
mlog(0, "cannot migrate lockres with unknown owner!\n");
}
*numlocks = count;
- mlog(0, "migrateable lockres having %d locks\n", *numlocks);
+
+ count = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
+ if (count < O2NM_MAX_NODES)
+ *hasrefs = 1;
+
+ mlog(0, "%s: res %.*s, Migrateable, locks %d, refs %d\n", dlm->name,
+ res->lockname.len, res->lockname.name, *numlocks, *hasrefs);
leave:
return ret;
const char *name;
unsigned int namelen;
int mle_added = 0;
- int numlocks;
+ int numlocks, hasrefs;
int wake = 0;
if (!dlm_grab(dlm))
name = res->lockname.name;
namelen = res->lockname.len;
- mlog(0, "migrating %.*s to %u\n", namelen, name, target);
+ mlog(0, "%s: Migrating %.*s to %u\n", dlm->name, namelen, name, target);
/*
* ensure this lockres is a proper candidate for migration
*/
spin_lock(&res->spinlock);
- ret = dlm_is_lockres_migrateable(dlm, res, &numlocks);
+ ret = dlm_is_lockres_migrateable(dlm, res, &numlocks, &hasrefs);
if (ret < 0) {
spin_unlock(&res->spinlock);
goto leave;
spin_unlock(&res->spinlock);
/* no work to do */
- if (numlocks == 0) {
- mlog(0, "no locks were found on this lockres! done!\n");
+ if (numlocks == 0 && !hasrefs)
goto leave;
- }
/*
* preallocate up front
* find a node to migrate the lockres to
*/
- mlog(0, "picking a migration node\n");
spin_lock(&dlm->spinlock);
/* pick a new node */
if (!test_bit(target, dlm->domain_map) ||
target >= O2NM_MAX_NODES) {
target = dlm_pick_migration_target(dlm, res);
}
- mlog(0, "node %u chosen for migration\n", target);
+ mlog(0, "%s: res %.*s, Node %u chosen for migration\n", dlm->name,
+ namelen, name, target);
if (target >= O2NM_MAX_NODES ||
!test_bit(target, dlm->domain_map)) {
{
int ret;
int lock_dropped = 0;
- int numlocks;
+ int numlocks, hasrefs;
spin_lock(&res->spinlock);
if (res->owner != dlm->node_num) {
}
/* No need to migrate a lockres having no locks */
- ret = dlm_is_lockres_migrateable(dlm, res, &numlocks);
- if (ret >= 0 && numlocks == 0) {
+ ret = dlm_is_lockres_migrateable(dlm, res, &numlocks, &hasrefs);
+ if (ret >= 0 && numlocks == 0 && !hasrefs) {
spin_unlock(&res->spinlock);
goto leave;
}
}
queue++;
}
+
+ nodenum = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
+ if (nodenum < O2NM_MAX_NODES) {
+ spin_unlock(&res->spinlock);
+ return nodenum;
+ }
spin_unlock(&res->spinlock);
mlog(0, "have not found a suitable target yet! checking domain map\n");
mutex_lock(&inode->i_mutex);
+ ocfs2_iocb_clear_sem_locked(iocb);
+
relock:
/* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
if (direct_io) {
down_read(&inode->i_alloc_sem);
have_alloc_sem = 1;
+ /* communicate with ocfs2_dio_end_io */
+ ocfs2_iocb_set_sem_locked(iocb);
}
/*
ocfs2_rw_unlock(inode, rw_level);
out_sems:
- if (have_alloc_sem)
+ if (have_alloc_sem) {
up_read(&inode->i_alloc_sem);
+ ocfs2_iocb_clear_sem_locked(iocb);
+ }
mutex_unlock(&inode->i_mutex);
goto bail;
}
+ ocfs2_iocb_clear_sem_locked(iocb);
+
/*
* buffered reads protect themselves in ->readpage(). O_DIRECT reads
* need locks to protect pending reads from racing with truncate.
if (filp->f_flags & O_DIRECT) {
down_read(&inode->i_alloc_sem);
have_alloc_sem = 1;
+ ocfs2_iocb_set_sem_locked(iocb);
ret = ocfs2_rw_lock(inode, 0);
if (ret < 0) {
}
bail:
- if (have_alloc_sem)
+ if (have_alloc_sem) {
up_read(&inode->i_alloc_sem);
+ ocfs2_iocb_clear_sem_locked(iocb);
+ }
if (rw_level != -1)
ocfs2_rw_unlock(inode, rw_level);
mlog_exit(ret);
char l_name[OCFS2_LOCK_ID_MAX_LEN];
unsigned int l_ro_holders;
unsigned int l_ex_holders;
- unsigned char l_level;
+ signed char l_level;
+ signed char l_requested;
+ signed char l_blocking;
/* Data packed - type enum ocfs2_lock_type */
unsigned char l_type;
unsigned char l_action;
/* Data packed - enum type ocfs2_unlock_action */
unsigned char l_unlock_action;
- unsigned char l_requested;
- unsigned char l_blocking;
unsigned int l_pending_gen;
spinlock_t l_lock;
#define OCFS2_LAST_LOCAL_SYSTEM_INODE LOCAL_GROUP_QUOTA_SYSTEM_INODE
NUM_SYSTEM_INODES
};
-#define NUM_GLOBAL_SYSTEM_INODES OCFS2_LAST_GLOBAL_SYSTEM_INODE
+#define NUM_GLOBAL_SYSTEM_INODES OCFS2_FIRST_LOCAL_SYSTEM_INODE
#define NUM_LOCAL_SYSTEM_INODES \
(NUM_SYSTEM_INODES - OCFS2_FIRST_LOCAL_SYSTEM_INODE)
return c;
}
- return c;
+ return NULL;
}
/*
#include <linux/mount.h>
#include <linux/seq_file.h>
#include <linux/quotaops.h>
-#include <linux/smp_lock.h>
#define MLOG_MASK_PREFIX ML_SUPER
#include <cluster/masklog.h>
return ret;
}
+/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+struct pipe_inode_info *get_pipe_info(struct file *file)
+{
+ struct inode *i = file->f_path.dentry->d_inode;
+
+ return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
+}
+
long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct pipe_inode_info *pipe;
long ret;
- pipe = file->f_path.dentry->d_inode->i_pipe;
+ pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
if (!tmp)
return -ENOMEM;
- pathname = d_path_with_unreachable(path, tmp, PAGE_SIZE);
+ pathname = d_path(path, tmp, PAGE_SIZE);
len = PTR_ERR(pathname);
if (IS_ERR(pathname))
goto out;
#include <linux/limits.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/sysctl.h>
#include <linux/slab.h>
* skip over unmapped regions.
*/
#define PAGEMAP_WALK_SIZE (PMD_SIZE)
+#define PAGEMAP_WALK_MASK (PMD_MASK)
static ssize_t pagemap_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long end;
pm.pos = 0;
- end = start_vaddr + PAGEMAP_WALK_SIZE;
+ end = (start_vaddr + PAGEMAP_WALK_SIZE) & PAGEMAP_WALK_MASK;
/* overflow ? */
if (end < start_vaddr || end > end_vaddr)
end = end_vaddr;
#include <linux/fcntl.h>
#include <linux/file.h>
#include <linux/uio.h>
-#include <linux/smp_lock.h>
#include <linux/fsnotify.h>
#include <linux/security.h>
#include <linux/module.h>
#include <linux/reiserfs_acl.h>
#include <linux/reiserfs_xattr.h>
#include <linux/exportfs.h>
-#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <asm/uaccess.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/compat.h>
/*
return 0;
}
- /* we need to make sure nobody is changing the file size beneath
- ** us
- */
- reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
depth = reiserfs_write_lock_once(inode->i_sb);
+ /* we need to make sure nobody is changing the file size beneath us */
+ reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+
write_from = inode->i_size & (blocksize - 1);
/* if we are on a block boundary, we are already unpacked. */
if (write_from == 0) {
#include <linux/fcntl.h>
#include <linux/stat.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/workqueue.h>
#include <linux/writeback.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/crc32.h>
-#include <linux/smp_lock.h>
struct file_system_type reiserfs_fs_type;
struct reiserfs_transaction_handle th;
size_t size = reiserfs_xattr_nblocks(inode,
reiserfs_acl_size(clone->a_count));
- reiserfs_write_lock(inode->i_sb);
+ int depth;
+
+ depth = reiserfs_write_lock_once(inode->i_sb);
error = journal_begin(&th, inode->i_sb, size * 2);
if (!error) {
int error2;
if (error2)
error = error2;
}
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
}
posix_acl_release(clone);
return error;
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags);
-/*
- * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
- * location, so checking ->i_pipe is not enough to verify that this is a
- * pipe.
- */
-static inline struct pipe_inode_info *pipe_info(struct inode *inode)
-{
- if (S_ISFIFO(inode->i_mode))
- return inode->i_pipe;
-
- return NULL;
-}
/*
* Determine where to splice to/from.
loff_t offset, *off;
long ret;
- ipipe = pipe_info(in->f_path.dentry->d_inode);
- opipe = pipe_info(out->f_path.dentry->d_inode);
+ ipipe = get_pipe_info(in);
+ opipe = get_pipe_info(out);
if (ipipe && opipe) {
if (off_in || off_out)
int error;
long ret;
- pipe = pipe_info(file->f_path.dentry->d_inode);
+ pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
};
long ret;
- pipe = pipe_info(file->f_path.dentry->d_inode);
+ pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
static long do_tee(struct file *in, struct file *out, size_t len,
unsigned int flags)
{
- struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
- struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
+ struct pipe_inode_info *ipipe = get_pipe_info(in);
+ struct pipe_inode_info *opipe = get_pipe_info(out);
int ret = -EINVAL;
/*
struct xfs_inode *ip = XFS_I(inode);
struct buffer_head *bh, *head;
loff_t offset = page_offset(page);
- ssize_t len = 1 << inode->i_blkbits;
if (!xfs_is_delayed_page(page, IO_DELAY))
goto out_invalidate;
xfs_ilock(ip, XFS_ILOCK_EXCL);
bh = head = page_buffers(page);
do {
- int done;
- xfs_fileoff_t offset_fsb;
- xfs_bmbt_irec_t imap;
- int nimaps = 1;
int error;
- xfs_fsblock_t firstblock;
- xfs_bmap_free_t flist;
+ xfs_fileoff_t start_fsb;
if (!buffer_delay(bh))
goto next_buffer;
- offset_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
-
- /*
- * Map the range first and check that it is a delalloc extent
- * before trying to unmap the range. Otherwise we will be
- * trying to remove a real extent (which requires a
- * transaction) or a hole, which is probably a bad idea...
- */
- error = xfs_bmapi(NULL, ip, offset_fsb, 1,
- XFS_BMAPI_ENTIRE, NULL, 0, &imap,
- &nimaps, NULL);
-
- if (error) {
- /* something screwed, just bail */
- if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
- "page discard failed delalloc mapping lookup.");
- }
- break;
- }
- if (!nimaps) {
- /* nothing there */
- goto next_buffer;
- }
- if (imap.br_startblock != DELAYSTARTBLOCK) {
- /* been converted, ignore */
- goto next_buffer;
- }
- WARN_ON(imap.br_blockcount == 0);
-
- /*
- * Note: while we initialise the firstblock/flist pair, they
- * should never be used because blocks should never be
- * allocated or freed for a delalloc extent and hence we need
- * don't cancel or finish them after the xfs_bunmapi() call.
- */
- xfs_bmap_init(&flist, &firstblock);
- error = xfs_bunmapi(NULL, ip, offset_fsb, 1, 0, 1, &firstblock,
- &flist, &done);
-
- ASSERT(!flist.xbf_count && !flist.xbf_first);
+ start_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb, 1);
if (error) {
/* something screwed, just bail */
if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
break;
}
next_buffer:
- offset += len;
+ offset += 1 << inode->i_blkbits;
} while ((bh = bh->b_this_page) != head);
struct inode *inode = mapping->host;
if (to > inode->i_size) {
- struct iattr ia = {
- .ia_valid = ATTR_SIZE | ATTR_FORCE,
- .ia_size = inode->i_size,
- };
- xfs_setattr(XFS_I(inode), &ia, XFS_ATTR_NOLOCK);
+ /*
+ * punch out the delalloc blocks we have already allocated. We
+ * don't call xfs_setattr() to do this as we may be in the
+ * middle of a multi-iovec write and so the vfs inode->i_size
+ * will not match the xfs ip->i_size and so it will zero too
+ * much. Hence we jus truncate the page cache to zero what is
+ * necessary and punch the delalloc blocks directly.
+ */
+ struct xfs_inode *ip = XFS_I(inode);
+ xfs_fileoff_t start_fsb;
+ xfs_fileoff_t end_fsb;
+ int error;
+
+ truncate_pagecache(inode, to, inode->i_size);
+
+ /*
+ * Check if there are any blocks that are outside of i_size
+ * that need to be trimmed back.
+ */
+ start_fsb = XFS_B_TO_FSB(ip->i_mount, inode->i_size) + 1;
+ end_fsb = XFS_B_TO_FSB(ip->i_mount, to);
+ if (end_fsb <= start_fsb)
+ return;
+
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
+ end_fsb - start_fsb);
+ if (error) {
+ /* something screwed, just bail */
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+ "xfs_vm_write_failed: unable to clean up ino %lld",
+ ip->i_ino);
+ }
+ }
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
}
spin_unlock(&pag->pag_buf_lock);
xfs_perag_put(pag);
- /* Attempt to get the semaphore without sleeping,
- * if this does not work then we need to drop the
- * spinlock and do a hard attempt on the semaphore.
- */
- if (down_trylock(&bp->b_sema)) {
+ if (xfs_buf_cond_lock(bp)) {
+ /* failed, so wait for the lock if requested. */
if (!(flags & XBF_TRYLOCK)) {
- /* wait for buffer ownership */
xfs_buf_lock(bp);
XFS_STATS_INC(xb_get_locked_waited);
} else {
- /* We asked for a trylock and failed, no need
- * to look at file offset and length here, we
- * know that this buffer at least overlaps our
- * buffer and is locked, therefore our buffer
- * either does not exist, or is this buffer.
- */
xfs_buf_rele(bp);
XFS_STATS_INC(xb_busy_locked);
return NULL;
}
- } else {
- /* trylock worked */
- XB_SET_OWNER(bp);
}
if (bp->b_flags & XBF_STALE) {
*/
/*
- * Locks a buffer object, if it is not already locked.
- * Note that this in no way locks the underlying pages, so it is only
- * useful for synchronizing concurrent use of buffer objects, not for
- * synchronizing independent access to the underlying pages.
+ * Locks a buffer object, if it is not already locked. Note that this in
+ * no way locks the underlying pages, so it is only useful for
+ * synchronizing concurrent use of buffer objects, not for synchronizing
+ * independent access to the underlying pages.
+ *
+ * If we come across a stale, pinned, locked buffer, we know that we are
+ * being asked to lock a buffer that has been reallocated. Because it is
+ * pinned, we know that the log has not been pushed to disk and hence it
+ * will still be locked. Rather than continuing to have trylock attempts
+ * fail until someone else pushes the log, push it ourselves before
+ * returning. This means that the xfsaild will not get stuck trying
+ * to push on stale inode buffers.
*/
int
xfs_buf_cond_lock(
locked = down_trylock(&bp->b_sema) == 0;
if (locked)
XB_SET_OWNER(bp);
+ else if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE))
+ xfs_log_force(bp->b_target->bt_mount, 0);
trace_xfs_buf_cond_lock(bp, _RET_IP_);
return locked ? 0 : -EBUSY;
if (error)
goto out_unlock_iolock;
}
-
- ASSERT(ip->i_delayed_blks == 0);
+ /*
+ * even after flushing the inode, there can still be delalloc
+ * blocks on the inode beyond EOF due to speculative
+ * preallocation. These are not removed until the release
+ * function is called or the inode is inactivated. Hence we
+ * cannot assert here that ip->i_delayed_blks == 0.
+ */
}
lock = xfs_ilock_map_shared(ip);
*count += xfs_bmbt_disk_get_blockcount(frp);
}
}
+
+/*
+ * dead simple method of punching delalyed allocation blocks from a range in
+ * the inode. Walks a block at a time so will be slow, but is only executed in
+ * rare error cases so the overhead is not critical. This will alays punch out
+ * both the start and end blocks, even if the ranges only partially overlap
+ * them, so it is up to the caller to ensure that partial blocks are not
+ * passed in.
+ */
+int
+xfs_bmap_punch_delalloc_range(
+ struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb,
+ xfs_fileoff_t length)
+{
+ xfs_fileoff_t remaining = length;
+ int error = 0;
+
+ ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
+
+ do {
+ int done;
+ xfs_bmbt_irec_t imap;
+ int nimaps = 1;
+ xfs_fsblock_t firstblock;
+ xfs_bmap_free_t flist;
+
+ /*
+ * Map the range first and check that it is a delalloc extent
+ * before trying to unmap the range. Otherwise we will be
+ * trying to remove a real extent (which requires a
+ * transaction) or a hole, which is probably a bad idea...
+ */
+ error = xfs_bmapi(NULL, ip, start_fsb, 1,
+ XFS_BMAPI_ENTIRE, NULL, 0, &imap,
+ &nimaps, NULL);
+
+ if (error) {
+ /* something screwed, just bail */
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+ "Failed delalloc mapping lookup ino %lld fsb %lld.",
+ ip->i_ino, start_fsb);
+ }
+ break;
+ }
+ if (!nimaps) {
+ /* nothing there */
+ goto next_block;
+ }
+ if (imap.br_startblock != DELAYSTARTBLOCK) {
+ /* been converted, ignore */
+ goto next_block;
+ }
+ WARN_ON(imap.br_blockcount == 0);
+
+ /*
+ * Note: while we initialise the firstblock/flist pair, they
+ * should never be used because blocks should never be
+ * allocated or freed for a delalloc extent and hence we need
+ * don't cancel or finish them after the xfs_bunmapi() call.
+ */
+ xfs_bmap_init(&flist, &firstblock);
+ error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock,
+ &flist, &done);
+ if (error)
+ break;
+
+ ASSERT(!flist.xbf_count && !flist.xbf_first);
+next_block:
+ start_fsb++;
+ remaining--;
+ } while(remaining > 0);
+
+ return error;
+}
int whichfork,
int *count);
+int
+xfs_bmap_punch_delalloc_range(
+ struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb,
+ xfs_fileoff_t length);
#endif /* __KERNEL__ */
#endif /* __XFS_BMAP_H__ */
ip->i_d.di_format = tip->i_d.di_format;
tip->i_d.di_format = tmp;
+ /*
+ * The extents in the source inode could still contain speculative
+ * preallocation beyond EOF (e.g. the file is open but not modified
+ * while defrag is in progress). In that case, we need to copy over the
+ * number of delalloc blocks the data fork in the source inode is
+ * tracking beyond EOF so that when the fork is truncated away when the
+ * temporary inode is unlinked we don't underrun the i_delayed_blks
+ * counter on that inode.
+ */
+ ASSERT(tip->i_delayed_blks == 0);
+ tip->i_delayed_blks = ip->i_delayed_blks;
+ ip->i_delayed_blks = 0;
+
ilf_fields = XFS_ILOG_CORE;
switch(ip->i_d.di_format) {
int xfs_etest[XFS_NUM_INJECT_ERROR];
int64_t xfs_etest_fsid[XFS_NUM_INJECT_ERROR];
char * xfs_etest_fsname[XFS_NUM_INJECT_ERROR];
+int xfs_error_test_active;
int
xfs_error_test(int error_tag, int *fsidp, char *expression,
len = strlen(mp->m_fsname);
xfs_etest_fsname[i] = kmem_alloc(len + 1, KM_SLEEP);
strcpy(xfs_etest_fsname[i], mp->m_fsname);
+ xfs_error_test_active++;
return 0;
}
}
xfs_etest_fsid[i] = 0LL;
kmem_free(xfs_etest_fsname[i]);
xfs_etest_fsname[i] = NULL;
+ xfs_error_test_active--;
}
}
#define XFS_RANDOM_BMAPIFORMAT XFS_RANDOM_DEFAULT
#ifdef DEBUG
+extern int xfs_error_test_active;
extern int xfs_error_test(int, int *, char *, int, char *, unsigned long);
#define XFS_NUM_INJECT_ERROR 10
#define XFS_TEST_ERROR(expr, mp, tag, rf) \
- ((expr) || \
+ ((expr) || (xfs_error_test_active && \
xfs_error_test((tag), (mp)->m_fixedfsid, "expr", __LINE__, __FILE__, \
- (rf)))
+ (rf))))
extern int xfs_errortag_add(int error_tag, xfs_mount_t *mp);
extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
}
/*
- * This is called to find out where the oldest active copy of the
- * inode log item in the on disk log resides now that the last log
- * write of it completed at the given lsn. Since we always re-log
- * all dirty data in an inode, the latest copy in the on disk log
- * is the only one that matters. Therefore, simply return the
- * given lsn.
+ * This is called to find out where the oldest active copy of the inode log
+ * item in the on disk log resides now that the last log write of it completed
+ * at the given lsn. Since we always re-log all dirty data in an inode, the
+ * latest copy in the on disk log is the only one that matters. Therefore,
+ * simply return the given lsn.
+ *
+ * If the inode has been marked stale because the cluster is being freed, we
+ * don't want to (re-)insert this inode into the AIL. There is a race condition
+ * where the cluster buffer may be unpinned before the inode is inserted into
+ * the AIL during transaction committed processing. If the buffer is unpinned
+ * before the inode item has been committed and inserted, then it is possible
+ * for the buffer to be written and IO completions before the inode is inserted
+ * into the AIL. In that case, we'd be inserting a clean, stale inode into the
+ * AIL which will never get removed. It will, however, get reclaimed which
+ * triggers an assert in xfs_inode_free() complaining about freein an inode
+ * still in the AIL.
+ *
+ * To avoid this, return a lower LSN than the one passed in so that the
+ * transaction committed code will not move the inode forward in the AIL but
+ * will still unpin it properly.
*/
STATIC xfs_lsn_t
xfs_inode_item_committed(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
+ struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+ struct xfs_inode *ip = iip->ili_inode;
+
+ if (xfs_iflags_test(ip, XFS_ISTALE))
+ return lsn - 1;
return lsn;
}
* it and some incremental backup programs won't work without it.
*/
xfs_trans_ichgtime(tp, src_ip, XFS_ICHGTIME_CHG);
+ xfs_trans_log_inode(tp, src_ip, XFS_ILOG_CORE);
/*
* Adjust the link count on src_dp. This is necessary when
#ifndef __ACPI_VIDEO_H
#define __ACPI_VIDEO_H
+#include <linux/errno.h> /* for ENODEV */
+
+struct acpi_device;
+
#define ACPI_VIDEO_DISPLAY_CRT 1
#define ACPI_VIDEO_DISPLAY_TV 2
#define ACPI_VIDEO_DISPLAY_DVI 3
#endif
#endif
-
#define I915_PARAM_HAS_EXECBUF2 9
#define I915_PARAM_HAS_BSD 10
#define I915_PARAM_HAS_BLT 11
+#define I915_PARAM_HAS_RELAXED_FENCING 12
+#define I915_PARAM_HAS_COHERENT_RINGS 13
typedef struct drm_i915_getparam {
int param;
#define NOUVEAU_GETPARAM_VM_VRAM_BASE 12
#define NOUVEAU_GETPARAM_GRAPH_UNITS 13
#define NOUVEAU_GETPARAM_PTIMER_TIME 14
+#define NOUVEAU_GETPARAM_HAS_BO_USAGE 15
struct drm_nouveau_getparam {
uint64_t param;
uint64_t value;
#define NOUVEAU_GEM_DOMAIN_GART (1 << 2)
#define NOUVEAU_GEM_DOMAIN_MAPPABLE (1 << 3)
+#define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00
+#define NOUVEAU_GEM_TILE_16BPP 0x00000001
+#define NOUVEAU_GEM_TILE_32BPP 0x00000002
+#define NOUVEAU_GEM_TILE_ZETA 0x00000004
+#define NOUVEAU_GEM_TILE_NONCONTIG 0x00000008
+
struct drm_nouveau_gem_info {
uint32_t handle;
uint32_t domain;
extern int acpi_blacklisted(void);
extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
-extern int acpi_osi_setup(char *str);
+extern void acpi_osi_setup(char *str);
#ifdef CONFIG_ACPI_NUMA
int acpi_get_pxm(acpi_handle handle);
#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
-struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
- int number,unsigned long *flags); /* number == -1: pick first available */
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+ const struct atmdev_ops *ops,
+ int number, /* -1 == pick first available */
+ unsigned long *flags);
struct atm_dev *atm_dev_lookup(int number);
void atm_dev_deregister(struct atm_dev *dev);
char buf[BINPRM_BUF_SIZE];
#ifdef CONFIG_MMU
struct vm_area_struct *vma;
+ unsigned long vma_pages;
#else
# define MAX_ARG_PAGES 32
struct page *page[MAX_ARG_PAGES];
unsigned long loader, exec;
};
+extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages);
+extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+ int write);
+
#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
unsigned char misaligned;
unsigned char discard_misaligned;
- unsigned char no_cluster;
+ unsigned char cluster;
signed char discard_zeroes_data;
};
#endif
};
-#define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */
#define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */
#define QUEUE_FLAG_STOPPED 2 /* queue is stopped */
#define QUEUE_FLAG_SYNCFULL 3 /* read queue has been filled */
#define QUEUE_FLAG_SECDISCARD 19 /* supports SECDISCARD */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
- (1 << QUEUE_FLAG_CLUSTER) | \
(1 << QUEUE_FLAG_STACKABLE) | \
(1 << QUEUE_FLAG_SAME_COMP) | \
(1 << QUEUE_FLAG_ADD_RANDOM))
#define rq_data_dir(rq) ((rq)->cmd_flags & 1)
+static inline unsigned int blk_queue_cluster(struct request_queue *q)
+{
+ return q->limits.cluster;
+}
+
/*
* We regard a request as sync, if either a read or a sync write
*/
extern void blk_cleanup_queue(struct request_queue *);
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
+extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int);
extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
#define alloc_bootmem(x) \
__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_align(x, align) \
+ __alloc_bootmem(x, align, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_nopanic(x) \
__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_pages(x) \
extern void ceph_release_page_vector(struct page **pages, int num_pages);
extern struct page **ceph_get_direct_page_vector(const char __user *data,
- int num_pages,
- loff_t off, size_t len);
-extern void ceph_put_page_vector(struct page **pages, int num_pages);
+ int num_pages,
+ bool write_page);
+extern void ceph_put_page_vector(struct page **pages, int num_pages,
+ bool dirty);
extern void ceph_release_page_vector(struct page **pages, int num_pages);
extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
extern int ceph_copy_user_to_page_vector(struct page **pages,
struct ceph_buffer *middle;
struct page **pages; /* data payload. NOT OWNER. */
unsigned nr_pages; /* size of page array */
+ unsigned page_alignment; /* io offset in first page */
struct ceph_pagelist *pagelist; /* instead of pages */
struct list_head list_head;
struct kref kref;
struct ceph_file_layout r_file_layout;
struct ceph_snap_context *r_snapc; /* snap context for writes */
unsigned r_num_pages; /* size of page array (follows) */
+ unsigned r_page_alignment; /* io offset in first page */
struct page **r_pages; /* pages for data payload */
int r_pages_from_pool;
int r_own_pages; /* if true, i own page list */
int do_sync, u32 truncate_seq,
u64 truncate_size,
struct timespec *mtime,
- bool use_mempool, int num_reply);
+ bool use_mempool, int num_reply,
+ int page_align);
static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
{
struct ceph_file_layout *layout,
u64 off, u64 *plen,
u32 truncate_seq, u64 truncate_size,
- struct page **pages, int nr_pages);
+ struct page **pages, int nr_pages,
+ int page_align);
extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
struct ceph_vino vino,
*
* 2) this code must not be preempted for a duration longer than the
* 32-bit counter half period minus the longest period between two
- * calls to this code.
+ * calls to this code;
*
* Those requirements ensure proper update to the state bit in memory.
* This is usually not a problem in practice, but if it is then a kernel
* timer should be scheduled to manage for this code to be executed often
* enough.
*
+ * And finally:
+ *
+ * 3) the cnt_lo argument must be seen as a globally incrementing value,
+ * meaning that it should be a direct reference to the counter data which
+ * can be evaluated according to a specific ordering within the macro,
+ * and not the result of a previous evaluation stored in a variable.
+ *
+ * For example, this is wrong:
+ *
+ * u32 partial = get_hw_count();
+ * u64 full = cnt32_to_63(partial);
+ * return full;
+ *
+ * This is fine:
+ *
+ * u64 full = cnt32_to_63(get_hw_count());
+ * return full;
+ *
* Note that the top bit (bit 63) in the returned value should be considered
* as garbage. It is not cleared here because callers are likely to use a
* multiplier on the returned value which can get rid of the top bit
*
* CPUs are exported via sysfs in the class/cpu/devices/
* directory.
- *
- * Per-cpu interfaces can be implemented using a struct device_interface.
- * See the following for how to do this:
- * - drivers/base/intf.c
- * - Documentation/driver-model/interface.txt
*/
#ifndef _LINUX_CPU_H_
#define _LINUX_CPU_H_
#ifdef CONFIG_DMA_ENGINE
enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
void dma_issue_pending_all(void);
+struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
+void dma_release_channel(struct dma_chan *chan);
#else
static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
}
static inline void dma_issue_pending_all(void)
{
- do { } while (0);
+}
+static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask,
+ dma_filter_fn fn, void *fn_param)
+{
+ return NULL;
+}
+static inline void dma_release_channel(struct dma_chan *chan)
+{
}
#endif
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
-struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
-void dma_release_channel(struct dma_chan *chan);
/* --- Helper iov-locking functions --- */
return 0;
}
-#define enable_intr_remapping(mode) (-1)
-#define disable_intr_remapping() (0)
-#define reenable_intr_remapping(mode) (0)
#define intr_remapping_enabled (0)
+
+static inline int enable_intr_remapping(int eim)
+{
+ return -1;
+}
+
+static inline void disable_intr_remapping(void)
+{
+}
+
+static inline int reenable_intr_remapping(int eim)
+{
+ return 0;
+}
#endif
/* Can't use the common MSI interrupt functions
FAN_ALL_PERM_EVENTS |\
FAN_Q_OVERFLOW)
-#define FANOTIFY_METADATA_VERSION 2
+#define FANOTIFY_METADATA_VERSION 3
struct fanotify_event_metadata {
__u32 event_len;
- __u32 vers;
+ __u8 vers;
+ __u8 reserved;
+ __u16 metadata_len;
__aligned_u64 mask;
__s32 fd;
__s32 pid;
struct fanotify_response {
__s32 fd;
__u32 response;
-} __attribute__ ((packed));
+};
/* Legit userspace responses to a _PERM event */
#define FAN_ALLOW 0x01
#define FAN_DENY 0x02
+/* No fd set in event */
+#define FAN_NOFD -1
/* Helper functions to deal with fanotify_event_metadata buffers */
#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
/* drivers/video/fbcmap.c */
extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
extern void fb_dealloc_cmap(struct fb_cmap *cmap);
extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
#define SEEK_MAX SEEK_END
struct fstrim_range {
- uint64_t start;
- uint64_t len;
- uint64_t minlen;
+ __u64 start;
+ __u64 len;
+ __u64 minlen;
};
/* And dynamically-tunable limits and defaults: */
sector_t (*bmap)(struct address_space *, sector_t);
void (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, gfp_t);
+ void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
int (*get_xip_mem)(struct address_space *, pgoff_t, int,
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
#endif
int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
- int (*trim_fs) (struct super_block *, struct fstrim_range *);
};
/*
};
#define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key)
-#define MFB_WAIT_FOR_VSYNC _IOW('F', 0x20, u_int32_t)
#define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8)
#define MFB_SET_ALPHA 0x80014d00
if (S_ISDIR(inode->i_mode))
mask |= FS_ISDIR;
- /* FMODE_NONOTIFY must never be set from user */
- file->f_mode &= ~FMODE_NONOTIFY;
-
fsnotify_parent(path, NULL, mask);
fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
struct mutex access_mutex;
struct list_head access_list;
wait_queue_head_t access_waitq;
- bool bypass_perm; /* protected by access_mutex */
+ atomic_t bypass_perm;
#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
int f_flags;
unsigned int max_marks;
extern gfp_t gfp_allowed_mask;
-extern void set_gfp_allowed_mask(gfp_t mask);
-extern gfp_t clear_gfp_allowed_mask(gfp_t mask);
+extern void pm_restrict_gfp_mask(void);
+extern void pm_restore_gfp_mask(void);
#endif /* __LINUX_GFP_H */
struct gpio_keys_platform_data {
struct gpio_keys_button *buttons;
int nbuttons;
+ unsigned int poll_interval; /* polling interval in msecs -
+ for polling driver only */
unsigned int rep:1; /* enable input subsystem auto repeat */
int (*enable)(struct device *dev);
void (*disable)(struct device *dev);
#define LINUX_HARDIRQ_H
#include <linux/preempt.h>
-#ifdef CONFIG_PREEMPT
-#include <linux/smp_lock.h>
-#endif
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <asm/hardirq.h>
#define in_nmi() (preempt_count() & NMI_MASK)
#if defined(CONFIG_PREEMPT) && defined(CONFIG_BKL)
-# define PREEMPT_INATOMIC_BASE kernel_locked()
+# include <linux/sched.h>
+# define PREEMPT_INATOMIC_BASE (current->lock_depth >= 0)
#else
# define PREEMPT_INATOMIC_BASE 0
#endif
#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern int __init init_hw_breakpoint(void);
+
static inline void hw_breakpoint_init(struct perf_event_attr *attr)
{
memset(attr, 0, sizeof(*attr));
#else /* !CONFIG_HAVE_HW_BREAKPOINT */
+static inline int __init init_hw_breakpoint(void) { return 0; }
+
static inline struct perf_event *
register_user_hw_breakpoint(struct perf_event_attr *attr,
perf_overflow_handler_t triggered,
*/
/* --- Bit algorithm adapters */
-#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
-#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */
#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */
-#define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
-#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */
-#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */
-#define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */
-
-/* --- SGI adapters */
-#define I2C_HW_SGI_VINO 0x160000
-
-/* --- SMBus only adapters */
-#define I2C_HW_SMBUS_W9968CF 0x04000d
-#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */
-
-/* --- Miscellaneous adapters */
-#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */
-#define I2C_HW_SAA7134 0x090000 /* SAA7134 video decoder bus */
#endif /* LINUX_I2C_ID_H */
*/
struct i2c_adapter {
struct module *owner;
- unsigned int id;
+ unsigned int id __deprecated;
unsigned int class; /* classes to allow probing for */
const struct i2c_algorithm *algo; /* the algorithm to access the bus */
void *algo_data;
__u16 version;
};
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
struct input_absinfo {
__s32 value;
__s32 minimum;
#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-#define EVIOCGKEYCODE _IOR('E', 0x04, struct input_keymap_entry) /* get keycode */
-#define EVIOCSKEYCODE _IOW('E', 0x04, struct input_keymap_entry) /* set keycode */
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
- * @absinfo: array of &struct absinfo elements holding information
+ * @absinfo: array of &struct input_absinfo elements holding information
* about absolute axes (current value, min, max, flat, fuzz,
* resolution)
* @key: reflects current state of device's keys/buttons
/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern int resource_alloc_from_bottom;
extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
extern int request_resource(struct resource *root, struct resource *new);
extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new);
extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
+extern void arch_remove_reservations(struct resource *avail);
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
+#include <linux/printk.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
#define USHRT_MAX ((u16)(~0U))
#define SHRT_MAX ((s16)(USHRT_MAX>>1))
#define SHRT_MIN ((s16)(-SHRT_MAX - 1))
*/
#define lower_32_bits(n) ((u32)(n))
-#define KERN_EMERG "<0>" /* system is unusable */
-#define KERN_ALERT "<1>" /* action must be taken immediately */
-#define KERN_CRIT "<2>" /* critical conditions */
-#define KERN_ERR "<3>" /* error conditions */
-#define KERN_WARNING "<4>" /* warning conditions */
-#define KERN_NOTICE "<5>" /* normal but significant condition */
-#define KERN_INFO "<6>" /* informational */
-#define KERN_DEBUG "<7>" /* debug-level messages */
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT "<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define KERN_CONT "<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
struct completion;
struct pt_regs;
struct user;
}
#endif
-struct va_format {
- const char *fmt;
- va_list *va;
-};
-
extern struct atomic_notifier_head panic_notifier_list;
extern long (*panic_blink)(int state);
NORET_TYPE void panic(const char * fmt, ...)
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- *
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG "[Firmware Bug]: "
-#define FW_WARN "[Firmware Warn]: "
-#define FW_INFO "[Firmware Info]: "
-
-/*
- * HW_ERR
- * Add this to a message for hardware errors, so that user can report
- * it to hardware vendor instead of LKML or software vendor.
- */
-#define HW_ERR "[Hardware Error]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2))) __cold;
-
-/*
- * Please don't use printk_ratelimit(), because it shares ratelimiting state
- * with all other unrelated printk_ratelimit() callsites. Instead use
- * printk_ratelimited() or plain old __ratelimit().
- */
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
- unsigned int interval_msec);
-
-extern int printk_delay_msec;
-extern int dmesg_restrict;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({ \
- static bool __print_once; \
- \
- if (!__print_once) { \
- __print_once = true; \
- printk(x); \
- } \
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
- __attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
- unsigned int interval_msec) \
- { return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-/*
- * Dummy printk for disabled debugging statements to use whilst maintaining
- * gcc's format and side-effect checking.
- */
-static inline __attribute__ ((format (printf, 1, 2)))
-int no_printk(const char *s, ...) { return 0; }
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
- early_printk(const char *fmt, ...);
-
unsigned long int_sqrt(unsigned long);
-static inline void console_silent(void)
-{
- console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
- if (console_loglevel)
- console_loglevel = 15;
-}
-
extern void bust_spinlocks(int yes);
extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
#define TAINT_CRAP 10
#define TAINT_FIRMWARE_WORKAROUND 11
-extern void dump_stack(void) __cold;
-
-enum {
- DUMP_PREFIX_NONE,
- DUMP_PREFIX_ADDRESS,
- DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
- int rowsize, int groupsize,
- char *linebuf, size_t linebuflen, bool ascii);
-extern void print_hex_dump(const char *level, const char *prefix_str,
- int prefix_type, int rowsize, int groupsize,
- const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
- const void *buf, size_t len);
-
extern const char hex_asc[];
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
extern int hex_to_bin(char ch);
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
- printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
- printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
- printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
- printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
- printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn pr_warning
-#define pr_notice(fmt, ...) \
- printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
- printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
- printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
- dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...) ({ \
- static DEFINE_RATELIMIT_STATE(_rs, \
- DEFAULT_RATELIMIT_INTERVAL, \
- DEFAULT_RATELIMIT_BURST); \
- \
- if (__ratelimit(&_rs)) \
- printk(fmt, ##__VA_ARGS__); \
-})
-#else
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_ratelimited printk
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_ratelimited pr_warning_ratelimited
-#define pr_notice_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
- ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
- ##__VA_ARGS__); 0; })
-#endif
-
/*
* General tracing related utility functions - trace_printk(),
* tracing_on/tracing_off and tracing_start()/tracing_stop
#define DEFINE_KTHREAD_WORK(work, fn) \
struct kthread_work work = KTHREAD_WORK_INIT(work, fn)
-static inline void init_kthread_worker(struct kthread_worker *worker)
-{
- *worker = (struct kthread_worker)KTHREAD_WORKER_INIT(*worker);
-}
-
-static inline void init_kthread_work(struct kthread_work *work,
- kthread_work_func_t fn)
-{
- *work = (struct kthread_work)KTHREAD_WORK_INIT(*work, fn);
-}
+/*
+ * kthread_worker.lock and kthread_work.done need their own lockdep class
+ * keys if they are defined on stack with lockdep enabled. Use the
+ * following macros when defining them on stack.
+ */
+#ifdef CONFIG_LOCKDEP
+# define KTHREAD_WORKER_INIT_ONSTACK(worker) \
+ ({ init_kthread_worker(&worker); worker; })
+# define DEFINE_KTHREAD_WORKER_ONSTACK(worker) \
+ struct kthread_worker worker = KTHREAD_WORKER_INIT_ONSTACK(worker)
+# define KTHREAD_WORK_INIT_ONSTACK(work, fn) \
+ ({ init_kthread_work((&work), fn); work; })
+# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn) \
+ struct kthread_work work = KTHREAD_WORK_INIT_ONSTACK(work, fn)
+#else
+# define DEFINE_KTHREAD_WORKER_ONSTACK(worker) DEFINE_KTHREAD_WORKER(worker)
+# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn) DEFINE_KTHREAD_WORK(work, fn)
+#endif
+
+extern void __init_kthread_worker(struct kthread_worker *worker,
+ const char *name, struct lock_class_key *key);
+
+#define init_kthread_worker(worker) \
+ do { \
+ static struct lock_class_key __key; \
+ __init_kthread_worker((worker), "("#worker")->lock", &__key); \
+ } while (0)
+
+#define init_kthread_work(work, fn) \
+ do { \
+ memset((work), 0, sizeof(struct kthread_work)); \
+ INIT_LIST_HEAD(&(work)->node); \
+ (work)->func = (fn); \
+ init_waitqueue_head(&(work)->done); \
+ } while (0)
int kthread_worker_fn(void *worker_ptr);
unsigned long, struct ata_port_operations *);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
-extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
int cmd, void __user *arg);
extern void ata_sas_port_destroy(struct ata_port *);
struct sockaddr_storage h_addr; /* peer address */
size_t h_addrlen;
struct sockaddr_storage h_srcaddr; /* our address (optional) */
+ size_t h_srcaddrlen;
struct rpc_clnt *h_rpcclnt; /* RPC client to talk to peer */
char *h_name; /* remote hostname */
u32 h_version; /* interface version */
#define MARVELL_PHY_ID_88E1118 0x01410e10
#define MARVELL_PHY_ID_88E1121R 0x01410cb0
#define MARVELL_PHY_ID_88E1145 0x01410cd0
+#define MARVELL_PHY_ID_88E1149R 0x01410e50
#define MARVELL_PHY_ID_88E1240 0x01410e30
#define MARVELL_PHY_ID_88E1318S 0x01410e90
extern void put_page_bootmem(struct page *page);
#endif
+void lock_memory_hotplug(void);
+void unlock_memory_hotplug(void);
+
#else /* ! CONFIG_MEMORY_HOTPLUG */
/*
* Stub functions for when hotplug is off
{
}
+static inline void lock_memory_hotplug(void) {}
+static inline void unlock_memory_hotplug(void) {}
+
#endif /* ! CONFIG_MEMORY_HOTPLUG */
#ifdef CONFIG_MEMORY_HOTREMOVE
#define WM8350_MCLK_SEL_PLL_32K 3
#define WM8350_MCLK_SEL_MCLK 5
-#define WM8350_MCLK_DIR_OUT 0
-#define WM8350_MCLK_DIR_IN 1
-
/* clock divider id's */
#define WM8350_ADC_CLKDIV 0
#define WM8350_DAC_CLKDIV 1
#define WM8994_CONFIGURE_GPIO 0x8000
#define WM8994_DRC_REGS 5
-#define WM8994_EQ_REGS 19
+#define WM8994_EQ_REGS 20
/**
* DRC configurations are specified with a label and a set of register
/* DDR mode at 1.8V */
#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */
/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */
mmc_pm_flag_t pm_caps; /* supported pm features */
#define symbol_put_addr(p) do { } while(0)
#endif /* CONFIG_MODULE_UNLOAD */
-int use_module(struct module *a, struct module *b);
+int ref_module(struct module *a, struct module *b);
/* This is a #define so the string doesn't get put in every .o file */
#define module_name(mod) \
Check NLM_F_EXCL
*/
-#define NLMSG_ALIGNTO 4
+#define NLMSG_ALIGNTO 4U
#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
#endif /* CONFIG_NFS_V3 */
extern const struct file_operations nfs_file_operations;
extern const struct address_space_operations nfs_file_aops;
+extern const struct address_space_operations nfs_dir_aops;
static inline struct nfs_open_context *nfs_file_open_context(struct file *filp)
{
return ino;
}
-#define nfs_wait_event(clnt, wq, condition) \
-({ \
- int __retval = wait_event_killable(wq, condition); \
- __retval; \
-})
-
#define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
#endif /* __KERNEL__ */
*/
enum {
PG_BUSY = 0,
+ PG_MAPPED,
PG_CLEAN,
PG_NEED_COMMIT,
PG_NEED_RESCHED,
int eof;
struct nfs_fh * fh;
struct nfs_fattr * fattr;
+ unsigned char d_type;
};
/*
*
* Nodes are exported via driverfs in the class/node/devices/
* directory.
- *
- * Per-node interfaces can be implemented using a struct device_interface.
- * See the following for how to do this:
- * - drivers/base/intf.c
- * - Documentation/driver-model/interface.txt
*/
#ifndef _LINUX_NODE_H_
#define _LINUX_NODE_H_
static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \
{ return test_and_clear_bit(PCG_##lname, &pc->flags); }
-TESTPCGFLAG(Locked, LOCK)
-
/* Cache flag is set only once (at allocation) */
TESTPCGFLAG(Cache, CACHE)
CLEARPCGFLAG(Cache, CACHE)
bit_spin_unlock(PCG_LOCK, &pc->flags);
}
+static inline int page_is_cgroup_locked(struct page_cgroup *pc)
+{
+ return bit_spin_is_locked(PCG_LOCK, &pc->flags);
+}
+
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
+#define PCI_VENDOR_ID_BCM_GVC 0x14a4
#define PCI_VENDOR_ID_BROADCOM 0x14e4
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
#define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822
#define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823
#define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F
#define PCI_DEVICE_ID_INTEL_I960 0x0960
#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062
int nr_active;
int is_active;
int nr_stat;
+ int rotate_disable;
atomic_t refcount;
struct task_struct *task;
int exclusive;
struct list_head rotation_list;
int jiffies_interval;
+ struct pmu *active_pmu;
};
struct perf_output_handle {
extern const char *perf_pmu_name(void);
extern void __perf_event_task_sched_in(struct task_struct *task);
extern void __perf_event_task_sched_out(struct task_struct *task, struct task_struct *next);
-
-extern atomic_t perf_task_events;
-
-static inline void perf_event_task_sched_in(struct task_struct *task)
-{
- COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
-}
-
-static inline
-void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
-{
- COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
-}
-
extern int perf_event_init_task(struct task_struct *child);
extern void perf_event_exit_task(struct task_struct *child);
extern void perf_event_free_task(struct task_struct *task);
__perf_sw_event(event_id, nr, nmi, regs, addr);
}
+extern atomic_t perf_task_events;
+
+static inline void perf_event_task_sched_in(struct task_struct *task)
+{
+ COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
+}
+
+static inline
+void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+{
+ perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
+
+ COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
+}
+
extern void perf_event_mmap(struct vm_area_struct *vma);
extern struct perf_guest_info_callbacks *perf_guest_cbs;
extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
/* for F_SETPIPE_SZ and F_GETPIPE_SZ */
long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
+struct pipe_inode_info *get_pipe_info(struct file *file);
#endif
static inline bool pm_runtime_suspended(struct device *dev)
{
- return dev->power.runtime_status == RPM_SUSPENDED;
+ return dev->power.runtime_status == RPM_SUSPENDED
+ && !dev->power.disable_depth;
}
static inline void pm_runtime_mark_last_busy(struct device *dev)
--- /dev/null
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define KERN_EMERG "<0>" /* system is unusable */
+#define KERN_ALERT "<1>" /* action must be taken immediately */
+#define KERN_CRIT "<2>" /* critical conditions */
+#define KERN_ERR "<3>" /* error conditions */
+#define KERN_WARNING "<4>" /* warning conditions */
+#define KERN_NOTICE "<5>" /* normal but significant condition */
+#define KERN_INFO "<6>" /* informational */
+#define KERN_DEBUG "<7>" /* debug-level messages */
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT "<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct va_format {
+ const char *fmt;
+ va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG "[Firmware Bug]: "
+#define FW_WARN "[Firmware Warn]: "
+#define FW_INFO "[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR "[Hardware Error]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+ __attribute__ ((format (printf, 1, 2))) __cold;
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites. Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({ \
+ static bool __print_once; \
+ \
+ if (!__print_once) { \
+ __print_once = true; \
+ printk(x); \
+ } \
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+ __attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+ unsigned int interval_msec) \
+ { return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+ early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+ console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+ if (console_loglevel)
+ console_loglevel = 15;
+}
+
+extern void dump_stack(void) __cold;
+
+enum {
+ DUMP_PREFIX_NONE,
+ DUMP_PREFIX_ADDRESS,
+ DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+ int rowsize, int groupsize,
+ char *linebuf, size_t linebuflen, bool ascii);
+extern void print_hex_dump(const char *level, const char *prefix_str,
+ int prefix_type, int rowsize, int groupsize,
+ const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+ const void *buf, size_t len);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+ printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+ printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+ printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+ printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+ printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+ printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+ printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+ dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...) ({ \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ \
+ if (__ratelimit(&_rs)) \
+ printk(fmt, ##__VA_ARGS__); \
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+ ##__VA_ARGS__); 0; })
+#endif
+
+#endif
#include <asm/unaligned.h>
#include <linux/bitops.h>
#include <linux/proc_fs.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/reiserfs_fs_i.h>
#include <linux/reiserfs_fs_sb.h>
#include <linux/if_link.h>
#include <linux/if_addr.h>
#include <linux/neighbour.h>
-#include <linux/netdevice.h>
/* rtnetlink families. Values up to 127 are reserved for real address
* families, values above 128 may be used arbitrarily.
#ifdef __KERNEL__
#include <linux/mutex.h>
+#include <linux/netdevice.h>
static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
{
extern unsigned long this_cpu_load(void);
-extern void calc_global_load(void);
+extern void calc_global_load(unsigned long ticks);
extern unsigned long get_parent_ip(unsigned long addr);
* single CPU.
*/
unsigned int cpu_power, cpu_power_orig;
+ unsigned int group_weight;
/*
* The CPUs this group covers.
extern int cap_task_setscheduler(struct task_struct *p);
extern int cap_task_setioprio(struct task_struct *p, int ioprio);
extern int cap_task_setnice(struct task_struct *p, int nice);
-extern int cap_syslog(int type, bool from_file);
extern int cap_vm_enough_memory(struct mm_struct *mm, long pages);
struct msghdr;
int (*sysctl) (struct ctl_table *table, int op);
int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
int (*quota_on) (struct dentry *dentry);
- int (*syslog) (int type, bool from_file);
+ int (*syslog) (int type);
int (*settime) (struct timespec *ts, struct timezone *tz);
int (*vm_enough_memory) (struct mm_struct *mm, long pages);
int security_sysctl(struct ctl_table *table, int op);
int security_quotactl(int cmds, int type, int id, struct super_block *sb);
int security_quota_on(struct dentry *dentry);
-int security_syslog(int type, bool from_file);
+int security_syslog(int type);
int security_settime(struct timespec *ts, struct timezone *tz);
int security_vm_enough_memory(long pages);
int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
return 0;
}
-static inline int security_syslog(int type, bool from_file)
+static inline int security_syslog(int type)
{
- return cap_syslog(type, from_file);
+ return 0;
}
static inline int security_settime(struct timespec *ts, struct timezone *tz)
};
struct clk_ops {
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
void (*init)(struct clk *clk);
+#endif
int (*enable)(struct clk *clk);
void (*disable)(struct clk *clk);
unsigned long (*recalc)(struct clk *clk);
- int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
int (*set_parent)(struct clk *clk, struct clk *parent);
long (*round_rate)(struct clk *clk, unsigned long rate);
};
void clk_unregister(struct clk *);
void clk_enable_init_clocks(void);
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
- NO_CHANGE = 0,
-
- IUS_N1_N1,
- IUS_322,
- IUS_522,
- IUS_N11,
-
- SB_N1,
-
- SB3_N1,
- SB3_32,
- SB3_43,
- SB3_54,
-
- BP_N1,
-
- IP_N1,
-};
-
struct clk_div_mult_table {
unsigned int *divisors;
unsigned int nr_divisors;
unsigned int nr_subgroups;
};
-#define _INTC_ARRAY(a) a, a == NULL ? 0 : sizeof(a)/sizeof(*a)
+#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
#define INTC_HW_DESC(vectors, groups, mask_regs, \
prio_regs, sense_regs, ack_regs) \
#ifdef CONFIG_LOCK_KERNEL
#include <linux/sched.h>
-#define kernel_locked() (current->lock_depth >= 0)
-
extern int __lockfunc __reacquire_kernel_lock(void);
extern void __lockfunc __release_kernel_lock(void);
#define lock_kernel()
#define unlock_kernel()
#define cycle_kernel_lock() do { } while(0)
-#define kernel_locked() 1
#endif /* CONFIG_BKL */
#define release_kernel_lock(task) do { } while(0)
LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
LINUX_MIB_TCPDEFERACCEPTDROP,
LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
+ LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */
__LINUX_MIB_MAX
};
return 0;
}
-extern char * nvram_get(const char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM47XX
- char *res = nvram_get("et0macaddr");
- if (res)
- memcpy(macaddr, res, 6);
-#endif
+ char buf[20];
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+ return;
+ nvram_parse_macaddr(buf, macaddr);
}
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
*/
-#define TASKSTATS_VERSION 7
+#define TASKSTATS_VERSION 8
#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN
* in linux/sched.h */
TASKSTATS_TYPE_STATS, /* taskstats structure */
TASKSTATS_TYPE_AGGR_PID, /* contains pid + stats */
TASKSTATS_TYPE_AGGR_TGID, /* contains tgid + stats */
+ TASKSTATS_TYPE_NULL, /* contains nothing */
__TASKSTATS_TYPE_MAX,
};
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
-#include <linux/smp_lock.h>
#include <asm/system.h>
#define TTY_HUPPED 18 /* Post driver->hangup() */
#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
+#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO driver.
#include <linux/kernel.h>
-struct __una_u16 { u16 x __attribute__((packed)); };
-struct __una_u32 { u32 x __attribute__((packed)); };
-struct __una_u64 { u64 x __attribute__((packed)); };
+struct __una_u16 { u16 x; } __attribute__((packed));
+struct __una_u32 { u32 x; } __attribute__((packed));
+struct __una_u64 { u64 x; } __attribute__((packed));
static inline u16 __get_unaligned_cpu16(const void *p)
{
int busnum; /* Bus number (in order of reg) */
const char *bus_name; /* stable id (PCI slot_name etc) */
u8 uses_dma; /* Does the host controller use DMA? */
+ u8 uses_pio_for_control; /*
+ * Does the host controller use PIO
+ * for control transfers?
+ */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
#ifndef _LINUX_VIDEO_OUTPUT_H
#define _LINUX_VIDEO_OUTPUT_H
#include <linux/device.h>
+#include <linux/err.h>
struct output_device;
struct output_properties {
int (*set_state)(struct output_device *);
struct device dev;
};
#define to_output_device(obj) container_of(obj, struct output_device, dev)
+#if defined(CONFIG_VIDEO_OUTPUT_CONTROL) || defined(CONFIG_VIDEO_OUTPUT_CONTROL_MODULE)
struct output_device *video_output_register(const char *name,
struct device *dev,
void *devdata,
struct output_properties *op);
void video_output_unregister(struct output_device *dev);
+#else
+static struct output_device *video_output_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct output_properties *op)
+{
+ return ERR_PTR(-ENODEV);
+}
+static void video_output_unregister(struct output_device *dev)
+{
+ return;
+}
+#endif
#endif
struct vm_area_struct; /* vma defining user mapping in mm_types.h */
-extern bool vmap_lazy_unmap;
-
/* bits in flags of vmalloc's vm_struct below */
#define VM_IOREMAP 0x00000001 /* ioremap() and friends */
#define VM_ALLOC 0x00000002 /* vmalloc() */
extern struct mutex saa7146_devices_lock;
int saa7146_register_extension(struct saa7146_extension*);
int saa7146_unregister_extension(struct saa7146_extension*);
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
/* Load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
int irq, void *platform_data,
u8 addr, const unsigned short *probe_addrs);
/* Load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
u8 addr, const unsigned short *probe_addrs)
{
- return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name,
- client_type, 0, NULL, addr, probe_addrs);
+ return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, client_type, 0, NULL,
+ addr, probe_addrs);
}
struct i2c_board_info;
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter, const char *module_name,
- struct i2c_board_info *info, const unsigned short *probe_addrs);
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs);
/* Initialize an v4l2_subdev with data from an i2c_client struct */
void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
unsigned int notification, void *arg);
/* The control handler. May be NULL. */
struct v4l2_ctrl_handler *ctrl_handler;
+ /* BKL replacement mutex. Temporary solution only. */
+ struct mutex ioctl_lock;
};
/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
#define WM8775_AIN3 4
#define WM8775_AIN4 8
-/* subdev group ID */
-#define WM8775_GID (1 << 0)
-
#endif
extern void unix_notinflight(struct file *fp);
extern void unix_gc(void);
extern void wait_for_unix_gc(void);
+extern struct sock *unix_get_socket(struct file *filp);
#define UNIX_HASH_SIZE 256
spinlock_t lock;
unsigned int gc_candidate : 1;
unsigned int gc_maybe_cycle : 1;
+ unsigned char recursion_level;
struct socket_wq peer_wq;
};
#define unix_sk(__sk) ((struct unix_sock *)__sk)
WIPHY_FLAG_4ADDR_AP = BIT(5),
WIPHY_FLAG_4ADDR_STATION = BIT(6),
WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
- WIPHY_FLAG_IBSS_RSN = BIT(7),
+ WIPHY_FLAG_IBSS_RSN = BIT(8),
};
struct mac_address {
__u8 proto;
__u8 flags;
#define FLOWI_FLAG_ANYSRC 0x01
-#define FLOWI_FLAG_MATCH_ANY_IIF 0x02
union {
struct {
__be16 sport;
return rt->rt6i_flags & RTF_LOCAL;
}
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
+
+static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
+{
+ struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
+
+ return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
+ skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
+}
+
#endif
#endif
*
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls
- * to this function and ieee80211_tx_status_irqsafe() may not be mixed
- * for a single hardware.
+ * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
+ * may not be mixed for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
void ieee80211_tx_status(struct ieee80211_hw *hw,
struct sk_buff *skb);
+/**
+ * ieee80211_tx_status_ni - transmit status callback (in process context)
+ *
+ * Like ieee80211_tx_status() but can be called in process context.
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_irqsafe() may not be mixed
+ * for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
+ struct sk_buff *skb)
+{
+ local_bh_disable();
+ ieee80211_tx_status(hw, skb);
+ local_bh_enable();
+}
+
/**
* ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
*
* Like ieee80211_tx_status() but can be called in IRQ context
* (internally defers to a tasklet.)
*
- * Calls to this function and ieee80211_tx_status() may not be mixed for a
- * single hardware.
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_ni() may not be mixed for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
{
- unsigned long now = ACCESS_ONCE(jiffies);
+ unsigned long now = jiffies;
if (neigh->used != now)
neigh->used = now;
static inline int tcf_valid_offset(const struct sk_buff *skb,
const unsigned char *ptr, const int len)
{
- return unlikely((ptr + len) < skb_tail_pointer(skb) && ptr > skb->head);
+ return likely((ptr + len) <= skb_tail_pointer(skb) &&
+ ptr >= skb->head &&
+ (ptr <= (ptr + len)));
}
#ifdef CONFIG_NET_CLS_IND
{
struct sk_buff *n;
- if ((action == TC_ACT_STOLEN || action == TC_ACT_QUEUED) &&
- !skb_shared(skb))
- n = skb_get(skb);
- else
- n = skb_clone(skb, gfp_mask);
+ n = skb_clone(skb, gfp_mask);
if (n) {
n->tc_verd = SET_TC_VERD(n->tc_verd, 0);
void (*unhash)(struct sock *sk);
void (*rehash)(struct sock *sk);
int (*get_port)(struct sock *sk, unsigned short snum);
+ void (*clear_sk)(struct sock *sk, int size);
/* Keeping track of sockets in use */
#ifdef CONFIG_PROC_FS
sk->sk_prot->hash(sk);
}
+void sk_prot_clear_portaddr_nulls(struct sock *sk, int size);
+
/* About 10 seconds */
#define SOCK_DESTROY_TIME (10*HZ)
/* Initialise core socket variables */
extern void sock_init_data(struct socket *sock, struct sock *sk);
+extern void sk_filter_release_rcu(struct rcu_head *rcu);
+
/**
* sk_filter_release - release a socket filter
* @fp: filter to remove
static inline void sk_filter_release(struct sk_filter *fp)
{
if (atomic_dec_and_test(&fp->refcnt))
- kfree(fp);
+ call_rcu_bh(&fp->rcu, sk_filter_release_rcu);
}
static inline void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp)
/*
* SCSI INTERACTION LAYER
*****************************/
-int fc_queuecommand(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fc_eh_abort(struct scsi_cmnd *);
int fc_eh_device_reset(struct scsi_cmnd *);
int fc_eh_host_reset(struct scsi_cmnd *);
extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
-extern int iscsi_queuecommand(struct scsi_cmnd *sc,
- void (*done)(struct scsi_cmnd *));
+extern int iscsi_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *sc);
/*
* iSCSI host helpers.
int sas_phy_enable(struct sas_phy *phy, int enabled);
int sas_phy_reset(struct sas_phy *phy, int hard_reset);
int sas_queue_up(struct sas_task *task);
-extern int sas_queuecommand(struct scsi_cmnd *,
- void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
extern int sas_target_alloc(struct scsi_target *);
extern int sas_slave_alloc(struct scsi_device *);
extern int sas_slave_configure(struct scsi_device *);
*
* STATUS: REQUIRED
*/
- int (* queuecommand)(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+ int (* queuecommand)(struct Scsi_Host *, struct scsi_cmnd *);
/*
* The transfer functions are used to queue a scsi command to
u64 vendor_id;
};
+/*
+ * Temporary #define for host lock push down. Can be removed when all
+ * drivers have been updated to take advantage of unlocked
+ * queuecommand.
+ *
+ */
+#define DEF_SCSI_QCMD(func_name) \
+ int func_name(struct Scsi_Host *shost, struct scsi_cmnd *cmd) \
+ { \
+ unsigned long irq_flags; \
+ int rc; \
+ spin_lock_irqsave(shost->host_lock, irq_flags); \
+ scsi_cmd_get_serial(shost, cmd); \
+ rc = func_name##_lck (cmd, cmd->scsi_done); \
+ spin_unlock_irqrestore(shost->host_lock, irq_flags); \
+ return rc; \
+ }
+
+
/*
* shost state: If you alter this, you also need to alter scsi_sysfs.c
* (for the ascii descriptions) and the state model enforcer:
extern void scsi_host_put(struct Scsi_Host *t);
extern struct Scsi_Host *scsi_host_lookup(unsigned short);
extern const char *scsi_host_state_name(enum scsi_host_state);
+extern void scsi_cmd_get_serial(struct Scsi_Host *, struct scsi_cmnd *);
extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
* ACK_MD (FSI2)
* CKG1 (FSI)
*
- * err: return value < 0
+ * err : return value < 0
+ * no change : return value == 0
+ * change xMD : return value > 0
*
* 0x-00000AB
*
struct sh_fsi_platform_info {
unsigned long porta_flags;
unsigned long portb_flags;
- int (*set_rate)(int is_porta, int rate); /* for master mode */
+ int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
};
#endif /* __SOUND_FSI_H */
#define FBIPUT_COLOR _IOW('F', 6, int)
#define FBIPUT_HSYNC _IOW('F', 9, int)
#define FBIPUT_VSYNC _IOW('F', 10, int)
-#define FBIO_WAITFORVSYNC _IOW('F', 0x20, u_int32_t)
#endif /* ifndef DA8XX_FB_H */
#ifdef CONFIG_PCI_MSI
/* Allocate an irq and a pirq to be used with MSIs. */
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq);
+#define XEN_ALLOC_PIRQ (1 << 0)
+#define XEN_ALLOC_IRQ (1 << 1)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc_mask);
int xen_create_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int type);
#endif
/* Return gsi allocated to pirq */
int xen_gsi_from_irq(unsigned pirq);
+/* Return irq from pirq */
+int xen_irq_from_pirq(unsigned pirq);
+
#endif /* _XEN_EVENTS_H */
* A ring contains as many entries as will fit, rounded down to the nearest
* power of two (so we can mask with (size-1) to loop around).
*/
-#define __RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __CONST_RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+ sizeof(((struct _s##_sring *)0)->ring[0])))
+
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
/*
* Macros to make the correct C datatypes for a new kind of ring.
};
DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
+/*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping 12
+struct xen_machphys_mapping {
+ unsigned long v_start, v_end; /* Start and end virtual addresses. */
+ unsigned long max_mfn; /* Maximum MFN that can be looked up. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
/*
* Sets the GPFN at which a particular page appears in the specified guest's
* pseudophysical address space.
uint32_t nr_pirqs;
};
+/* type is MAP_PIRQ_TYPE_GSI or MAP_PIRQ_TYPE_MSI
+ * the hypercall returns a free pirq */
+#define PHYSDEVOP_get_free_pirq 23
+struct physdev_get_free_pirq {
+ /* IN */
+ int type;
+ /* OUT */
+ uint32_t pirq;
+};
+
/*
* Notify that some PIRQ-bound event channels have been unmasked.
* ** This command is obsolete since interface version 0x00030202 and is **
+#ifndef _XEN_PAGE_H
+#define _XEN_PAGE_H
+
#include <asm/xen/page.h>
+
+extern phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
+
+#endif /* _XEN_PAGE_H */
#define __LINUX_PUBLIC_PRIVCMD_H__
#include <linux/types.h>
+#include <linux/compiler.h>
typedef unsigned long xen_pfn_t;
-#ifndef __user
-#define __user
-#endif
-
struct privcmd_hypercall {
__u64 op;
__u64 arg[5];
if boot option "noswapaccount" is set, swap will not be accounted.
Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
size is 4096bytes, 512k per 1Gbytes of swap.
+config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+ bool "Memory Resource Controller Swap Extension enabled by default"
+ depends on CGROUP_MEM_RES_CTLR_SWAP
+ default y
+ help
+ Memory Resource Controller Swap Extension comes with its price in
+ a bigger memory consumption. General purpose distribution kernels
+ which want to enable the feautre but keep it disabled by default
+ and let the user enable it by swapaccount boot command line
+ parameter should have this option unselected.
+ For those who want to have the feature enabled by default should
+ select this option (if, for some reason, they need to disable it
+ then noswapaccount does the trick).
menuconfig CGROUP_SCHED
bool "Group CPU scheduler"
*
* Returns the matching dev_t on success or 0 on failure.
*/
-static dev_t __init devt_from_partuuid(char *uuid_str)
+static dev_t devt_from_partuuid(char *uuid_str)
{
dev_t res = 0;
struct device *dev = NULL;
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/acpi.h>
#define for_each_kdbcmd(cmd, num) \
for ((cmd) = kdb_base_commands, (num) = 0; \
num < kdb_max_commands; \
- num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++)
+ num++, num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++)
typedef struct _kdbmsg {
int km_diag; /* kdb diagnostic */
}
if (!s->usable)
return KDB_NOTIMP;
- s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
+ s->command = kzalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
if (!s->command) {
kdb_printf("Could not allocate new kdb_defcmd table for %s\n",
cmdstr);
*/
static int kdb_ll(int argc, const char **argv)
{
- int diag;
+ int diag = 0;
unsigned long addr;
long offset = 0;
unsigned long va;
char buf[80];
if (KDB_FLAG(CMD_INTERRUPT))
- return 0;
+ goto out;
sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
diag = kdb_parse(buf);
if (diag)
- return diag;
+ goto out;
addr = va + linkoffset;
if (kdb_getword(&va, addr, sizeof(va)))
- return 0;
+ goto out;
}
- kfree(command);
- return 0;
+out:
+ kfree(command);
+ return diag;
}
static int kdb_kgdb(int argc, const char **argv)
}
if (kdb_commands) {
memcpy(new, kdb_commands,
- kdb_max_commands * sizeof(*new));
+ (kdb_max_commands - KDB_BASE_CMD_MAX) * sizeof(*new));
kfree(kdb_commands);
}
memset(new + kdb_max_commands, 0,
kdb_command_extend * sizeof(*new));
kdb_commands = new;
- kp = kdb_commands + kdb_max_commands;
+ kp = kdb_commands + kdb_max_commands - KDB_BASE_CMD_MAX;
kdb_max_commands += kdb_command_extend;
}
if (unlikely(!tsk->pid))
panic("Attempted to kill the idle task!");
+ /*
+ * If do_exit is called because this processes oopsed, it's possible
+ * that get_fs() was left as KERNEL_DS, so reset it to USER_DS before
+ * continuing. Amongst other possible reasons, this is to prevent
+ * mm_release()->clear_child_tid() from writing to a user-controlled
+ * kernel address.
+ */
+ set_fs(USER_DS);
+
tracehook_report_exit(&code);
validate_creds_for_do_exit(tsk);
setup_thread_stack(tsk, orig);
clear_user_return_notifier(tsk);
+ clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
*stackend = STACK_END_MAGIC; /* for overflow detection */
{
struct robust_list_head __user *head = curr->robust_list;
struct robust_list __user *entry, *next_entry, *pending;
- unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+ unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+ unsigned int uninitialized_var(next_pi);
unsigned long futex_offset;
int rc;
{
struct compat_robust_list_head __user *head = curr->compat_robust_list;
struct robust_list __user *entry, *next_entry, *pending;
- unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+ unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+ unsigned int uninitialized_var(next_pi);
compat_uptr_t uentry, next_uentry, upending;
compat_long_t futex_offset;
int rc;
.read = hw_breakpoint_pmu_read,
};
-static int __init init_hw_breakpoint(void)
+int __init init_hw_breakpoint(void)
{
unsigned int **task_bp_pinned;
int cpu, err_cpu;
return -ENOMEM;
}
-core_initcall(init_hw_breakpoint);
static int irq_spurious_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, irq_spurious_proc_show, NULL);
+ return single_open(file, irq_spurious_proc_show, PDE(inode)->data);
}
static const struct file_operations irq_spurious_proc_fops = {
* Clear the BUSY bit and return to the free state if
* no-one else claimed it meanwhile.
*/
- cmpxchg(&entry->next, next_flags(NULL, IRQ_WORK_BUSY), NULL);
+ (void)cmpxchg(&entry->next,
+ next_flags(NULL, IRQ_WORK_BUSY),
+ NULL);
}
}
EXPORT_SYMBOL_GPL(irq_work_run);
return 0;
}
+void __init_kthread_worker(struct kthread_worker *worker,
+ const char *name,
+ struct lock_class_key *key)
+{
+ spin_lock_init(&worker->lock);
+ lockdep_set_class_and_name(&worker->lock, key, name);
+ INIT_LIST_HEAD(&worker->work_list);
+ worker->task = NULL;
+}
+EXPORT_SYMBOL_GPL(__init_kthread_worker);
+
/**
* kthread_worker_fn - kthread function to process kthread_worker
* @worker_ptr: pointer to initialized kthread_worker
kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) *
mod->num_trace_events, GFP_KERNEL);
#endif
+#ifdef CONFIG_TRACING
+ mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt",
+ sizeof(*mod->trace_bprintk_fmt_start),
+ &mod->num_trace_bprintk_fmt);
+ /*
+ * This section contains pointers to allocated objects in the trace
+ * code and not scanning it leads to false positives.
+ */
+ kmemleak_scan_area(mod->trace_bprintk_fmt_start,
+ sizeof(*mod->trace_bprintk_fmt_start) *
+ mod->num_trace_bprintk_fmt, GFP_KERNEL);
+#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
/* sechdrs[0].sh_size is always zero */
mod->ftrace_callsites = section_objs(info, "__mcount_loc",
#include <linux/kernel_stat.h>
#include <linux/perf_event.h>
#include <linux/ftrace_event.h>
+#include <linux/hw_breakpoint.h>
#include <asm/irq_regs.h>
{
int ctxn;
- perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
-
for_each_task_context_nr(ctxn)
perf_event_context_sched_out(task, ctxn, next);
}
{
raw_spin_lock(&ctx->lock);
- /* Rotate the first entry last of non-pinned groups */
- list_rotate_left(&ctx->flexible_groups);
+ /*
+ * Rotate the first entry last of non-pinned groups. Rotation might be
+ * disabled by the inheritance code.
+ */
+ if (!ctx->rotate_disable)
+ list_rotate_left(&ctx->flexible_groups);
raw_spin_unlock(&ctx->lock);
}
raw_spin_unlock_irq(&ctx->lock);
mutex_unlock(&ctx->mutex);
- mutex_lock(&event->owner->perf_event_mutex);
- list_del_init(&event->owner_entry);
- mutex_unlock(&event->owner->perf_event_mutex);
- put_task_struct(event->owner);
-
free_event(event);
return 0;
static int perf_release(struct inode *inode, struct file *file)
{
struct perf_event *event = file->private_data;
+ struct task_struct *owner;
file->private_data = NULL;
+ rcu_read_lock();
+ owner = ACCESS_ONCE(event->owner);
+ /*
+ * Matches the smp_wmb() in perf_event_exit_task(). If we observe
+ * !owner it means the list deletion is complete and we can indeed
+ * free this event, otherwise we need to serialize on
+ * owner->perf_event_mutex.
+ */
+ smp_read_barrier_depends();
+ if (owner) {
+ /*
+ * Since delayed_put_task_struct() also drops the last
+ * task reference we can safely take a new reference
+ * while holding the rcu_read_lock().
+ */
+ get_task_struct(owner);
+ }
+ rcu_read_unlock();
+
+ if (owner) {
+ mutex_lock(&owner->perf_event_mutex);
+ /*
+ * We have to re-check the event->owner field, if it is cleared
+ * we raced with perf_event_exit_task(), acquiring the mutex
+ * ensured they're done, and we can proceed with freeing the
+ * event.
+ */
+ if (event->owner)
+ list_del_init(&event->owner_entry);
+ mutex_unlock(&owner->perf_event_mutex);
+ put_task_struct(owner);
+ }
+
return perf_event_release_kernel(event);
}
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_task_ctx(&cpuctx->ctx, task_event);
ctx = task_event->task_ctx;
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_comm_ctx(&cpuctx->ctx, comm_event);
ctxn = pmu->task_ctx_nr;
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_mmap_ctx(&cpuctx->ctx, mmap_event,
vma->vm_flags & VM_EXEC);
break;
}
- if (event_id > PERF_COUNT_SW_MAX)
+ if (event_id >= PERF_COUNT_SW_MAX)
return -ENOENT;
if (!event->parent) {
return NULL;
}
-static void free_pmu_context(void * __percpu cpu_context)
+static void update_pmu_context(struct pmu *pmu, struct pmu *old_pmu)
{
- struct pmu *pmu;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct perf_cpu_context *cpuctx;
+
+ cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
+
+ if (cpuctx->active_pmu == old_pmu)
+ cpuctx->active_pmu = pmu;
+ }
+}
+
+static void free_pmu_context(struct pmu *pmu)
+{
+ struct pmu *i;
mutex_lock(&pmus_lock);
/*
* Like a real lame refcount.
*/
- list_for_each_entry(pmu, &pmus, entry) {
- if (pmu->pmu_cpu_context == cpu_context)
+ list_for_each_entry(i, &pmus, entry) {
+ if (i->pmu_cpu_context == pmu->pmu_cpu_context) {
+ update_pmu_context(i, pmu);
goto out;
+ }
}
- free_percpu(cpu_context);
+ free_percpu(pmu->pmu_cpu_context);
out:
mutex_unlock(&pmus_lock);
}
cpuctx->ctx.pmu = pmu;
cpuctx->jiffies_interval = 1;
INIT_LIST_HEAD(&cpuctx->rotation_list);
+ cpuctx->active_pmu = pmu;
}
got_cpu_context:
synchronize_rcu();
free_percpu(pmu->pmu_disable_count);
- free_pmu_context(pmu->pmu_cpu_context);
+ free_pmu_context(pmu);
}
struct pmu *perf_init_event(struct perf_event *event)
mutex_unlock(&ctx->mutex);
event->owner = current;
- get_task_struct(current);
+
mutex_lock(¤t->perf_event_mutex);
list_add_tail(&event->owner_entry, ¤t->perf_event_list);
mutex_unlock(¤t->perf_event_mutex);
++ctx->generation;
mutex_unlock(&ctx->mutex);
- event->owner = current;
- get_task_struct(current);
- mutex_lock(¤t->perf_event_mutex);
- list_add_tail(&event->owner_entry, ¤t->perf_event_list);
- mutex_unlock(¤t->perf_event_mutex);
-
return event;
err_free:
*/
void perf_event_exit_task(struct task_struct *child)
{
+ struct perf_event *event, *tmp;
int ctxn;
+ mutex_lock(&child->perf_event_mutex);
+ list_for_each_entry_safe(event, tmp, &child->perf_event_list,
+ owner_entry) {
+ list_del_init(&event->owner_entry);
+
+ /*
+ * Ensure the list deletion is visible before we clear
+ * the owner, closes a race against perf_release() where
+ * we need to serialize on the owner->perf_event_mutex.
+ */
+ smp_wmb();
+ event->owner = NULL;
+ }
+ mutex_unlock(&child->perf_event_mutex);
+
for_each_task_context_nr(ctxn)
perf_event_exit_task_context(child, ctxn);
}
struct perf_event *event;
struct task_struct *parent = current;
int inherited_all = 1;
+ unsigned long flags;
int ret = 0;
child->perf_event_ctxp[ctxn] = NULL;
break;
}
+ /*
+ * We can't hold ctx->lock when iterating the ->flexible_group list due
+ * to allocations, but we need to prevent rotation because
+ * rotate_ctx() will change the list from interrupt context.
+ */
+ raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+ parent_ctx->rotate_disable = 1;
+ raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
list_for_each_entry(event, &parent_ctx->flexible_groups, group_entry) {
ret = inherit_task_group(event, parent, parent_ctx,
child, ctxn, &inherited_all);
break;
}
+ raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+ parent_ctx->rotate_disable = 0;
+ raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
child_ctx = child->perf_event_ctxp[ctxn];
if (child_ctx && inherited_all) {
void __init perf_event_init(void)
{
+ int ret;
+
perf_event_init_all_cpus();
init_srcu_struct(&pmus_srcu);
perf_pmu_register(&perf_swevent);
perf_pmu_register(&perf_task_clock);
perf_tp_register();
perf_cpu_notifier(perf_cpu_notify);
+
+ ret = init_hw_breakpoint();
+ WARN(ret, "hw_breakpoint initialization failed with: %d", ret);
}
switch (o->type) {
case PM_QOS_MIN:
- return plist_last(&o->requests)->prio;
+ return plist_first(&o->requests)->prio;
case PM_QOS_MAX:
- return plist_first(&o->requests)->prio;
+ return plist_last(&o->requests)->prio;
default:
/* runtime check for not using enum */
if (pid == 0)
return 0;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
p = find_task_by_vpid(pid);
if (!p || !(CPUCLOCK_PERTHREAD(which_clock) ?
- same_thread_group(p, current) : thread_group_leader(p))) {
+ same_thread_group(p, current) : has_group_leader_pid(p))) {
error = -EINVAL;
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return error;
}
INIT_LIST_HEAD(&new_timer->it.cpu.entry);
- read_lock(&tasklist_lock);
+ rcu_read_lock();
if (CPUCLOCK_PERTHREAD(new_timer->it_clock)) {
if (pid == 0) {
p = current;
p = current->group_leader;
} else {
p = find_task_by_vpid(pid);
- if (p && !thread_group_leader(p))
+ if (p && !has_group_leader_pid(p))
p = NULL;
}
}
} else {
ret = -EINVAL;
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return ret;
}
depends on PM_SLEEP || PM_RUNTIME
default y
+config ARCH_HAS_OPP
+ bool
+
config PM_OPP
bool "Operating Performance Point (OPP) Layer library"
depends on PM
+ depends on ARCH_HAS_OPP
---help---
SOCs have a standard set of tuples consisting of frequency and
voltage pairs that the device will support per voltage domain. This
int hibernation_snapshot(int platform_mode)
{
int error;
- gfp_t saved_mask;
error = platform_begin(platform_mode);
if (error)
goto Close;
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Recover_platform;
goto Recover_platform;
error = create_image(platform_mode);
- /* Control returns here after successful restore */
+ /*
+ * Control returns here (1) after the image has been created or the
+ * image creation has failed and (2) after a successful restore.
+ */
Resume_devices:
/* We may need to release the preallocated image pages here. */
dpm_resume_end(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- set_gfp_allowed_mask(saved_mask);
+
+ if (error || !in_suspend)
+ pm_restore_gfp_mask();
+
resume_console();
Close:
platform_end(platform_mode);
int hibernation_restore(int platform_mode)
{
int error;
- gfp_t saved_mask;
pm_prepare_console();
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
dpm_resume_end(PMSG_RECOVER);
}
- set_gfp_allowed_mask(saved_mask);
+ pm_restore_gfp_mask();
resume_console();
pm_restore_console();
return error;
int hibernation_platform_enter(void)
{
int error;
- gfp_t saved_mask;
if (!hibernation_ops)
return -ENOSYS;
entering_platform_hibernation = true;
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
Resume_devices:
entering_platform_hibernation = false;
dpm_resume_end(PMSG_RESTORE);
- set_gfp_allowed_mask(saved_mask);
resume_console();
Close:
swsusp_free();
if (!error)
power_down();
+ pm_restore_gfp_mask();
} else {
pr_debug("PM: Image restored successfully.\n");
}
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
- gfp_t saved_mask;
if (!suspend_ops)
return -ENOSYS;
goto Close;
}
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
- set_gfp_allowed_mask(saved_mask);
+ pm_restore_gfp_mask();
resume_console();
Close:
if (suspend_ops->end)
*
* Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+ * Copyright (C) 2010 Bojan Smojver <bojan@rexursive.com>
*
* This file is released under the GPLv2.
*
#include "power.h"
-#define HIBERNATE_SIG "LINHIB0001"
+#define HIBERNATE_SIG "S1SUSPEND"
/*
* The swap map is a data structure used for keeping track of each page
{
unsigned int m;
int error = 0;
+ struct bio *bio;
struct timeval start;
struct timeval stop;
unsigned nr_pages;
- size_t off, unc_len, cmp_len;
- unsigned char *unc, *cmp, *page;
+ size_t i, off, unc_len, cmp_len;
+ unsigned char *unc, *cmp, *page[LZO_CMP_PAGES];
- page = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
- if (!page) {
- printk(KERN_ERR "PM: Failed to allocate LZO page\n");
- return -ENOMEM;
+ for (i = 0; i < LZO_CMP_PAGES; i++) {
+ page[i] = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
+ if (!page[i]) {
+ printk(KERN_ERR "PM: Failed to allocate LZO page\n");
+
+ while (i)
+ free_page((unsigned long)page[--i]);
+
+ return -ENOMEM;
+ }
}
unc = vmalloc(LZO_UNC_SIZE);
if (!unc) {
printk(KERN_ERR "PM: Failed to allocate LZO uncompressed\n");
- free_page((unsigned long)page);
+
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
+
return -ENOMEM;
}
cmp = vmalloc(LZO_CMP_SIZE);
if (!cmp) {
printk(KERN_ERR "PM: Failed to allocate LZO compressed\n");
+
vfree(unc);
- free_page((unsigned long)page);
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
+
return -ENOMEM;
}
if (!m)
m = 1;
nr_pages = 0;
+ bio = NULL;
do_gettimeofday(&start);
error = snapshot_write_next(snapshot);
goto out_finish;
for (;;) {
- error = swap_read_page(handle, page, NULL); /* sync */
+ error = swap_read_page(handle, page[0], NULL); /* sync */
if (error)
break;
- cmp_len = *(size_t *)page;
+ cmp_len = *(size_t *)page[0];
if (unlikely(!cmp_len ||
cmp_len > lzo1x_worst_compress(LZO_UNC_SIZE))) {
printk(KERN_ERR "PM: Invalid LZO compressed length\n");
break;
}
- memcpy(cmp, page, PAGE_SIZE);
- for (off = PAGE_SIZE; off < LZO_HEADER + cmp_len; off += PAGE_SIZE) {
- error = swap_read_page(handle, page, NULL); /* sync */
+ for (off = PAGE_SIZE, i = 1;
+ off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+ error = swap_read_page(handle, page[i], &bio);
if (error)
goto out_finish;
+ }
- memcpy(cmp + off, page, PAGE_SIZE);
+ error = hib_wait_on_bio_chain(&bio); /* need all data now */
+ if (error)
+ goto out_finish;
+
+ for (off = 0, i = 0;
+ off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+ memcpy(cmp + off, page[i], PAGE_SIZE);
}
unc_len = LZO_UNC_SIZE;
vfree(cmp);
vfree(unc);
- free_page((unsigned long)page);
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
return error;
}
free_all_swap_pages(data->swap);
if (data->frozen)
thaw_processes();
- pm_notifier_call_chain(data->mode == O_WRONLY ?
+ pm_notifier_call_chain(data->mode == O_RDONLY ?
PM_POST_HIBERNATION : PM_POST_RESTORE);
atomic_inc(&snapshot_device_available);
case SNAPSHOT_UNFREEZE:
if (!data->frozen || data->ready)
break;
+ pm_restore_gfp_mask();
thaw_processes();
usermodehelper_enable();
data->frozen = 0;
error = -EPERM;
break;
}
+ pm_restore_gfp_mask();
error = hibernation_snapshot(data->platform_support);
if (!error)
error = put_user(in_suspend, (int __user *)arg);
char c;
int error = 0;
- error = security_syslog(type, from_file);
+ /*
+ * If this is from /proc/kmsg we only do the capabilities checks
+ * at open time.
+ */
+ if (type == SYSLOG_ACTION_OPEN || !from_file) {
+ if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if ((type != SYSLOG_ACTION_READ_ALL &&
+ type != SYSLOG_ACTION_SIZE_BUFFER) &&
+ !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ }
+
+ error = security_syslog(type);
if (error)
return error;
int printk_needs_cpu(int cpu)
{
+ if (unlikely(cpu_is_offline(cpu)))
+ printk_tick();
return per_cpu(printk_pending, cpu);
}
void wake_up_klogd(void)
{
if (waitqueue_active(&log_wait))
- __raw_get_cpu_var(printk_pending) = 1;
+ this_cpu_write(printk_pending, 1);
}
/**
static DEFINE_RWLOCK(resource_lock);
-/*
- * By default, we allocate free space bottom-up. The architecture can request
- * top-down by clearing this flag. The user can override the architecture's
- * choice with the "resource_alloc_from_bottom" kernel boot option, but that
- * should only be a debugging tool.
- */
-int resource_alloc_from_bottom = 1;
-
-static __init int setup_alloc_from_bottom(char *s)
-{
- printk(KERN_INFO
- "resource: allocating from bottom-up; please report a bug\n");
- resource_alloc_from_bottom = 1;
- return 0;
-}
-early_param("resource_alloc_from_bottom", setup_alloc_from_bottom);
-
static void *r_next(struct seq_file *m, void *v, loff_t *pos)
{
struct resource *p = v;
return walk_system_ram_range(pfn, 1, NULL, __is_ram) == 1;
}
+void __weak arch_remove_reservations(struct resource *avail)
+{
+}
+
static resource_size_t simple_align_resource(void *data,
const struct resource *avail,
resource_size_t size,
return res1->start <= res2->start && res1->end >= res2->end;
}
-/*
- * Find the resource before "child" in the sibling list of "root" children.
- */
-static struct resource *find_sibling_prev(struct resource *root, struct resource *child)
-{
- struct resource *this;
-
- for (this = root->child; this; this = this->sibling)
- if (this->sibling == child)
- return this;
-
- return NULL;
-}
-
/*
* Find empty slot in the resource tree given range and alignment.
- * This version allocates from the end of the root resource first.
- */
-static int find_resource_from_top(struct resource *root, struct resource *new,
- resource_size_t size, resource_size_t min,
- resource_size_t max, resource_size_t align,
- resource_size_t (*alignf)(void *,
- const struct resource *,
- resource_size_t,
- resource_size_t),
- void *alignf_data)
-{
- struct resource *this;
- struct resource tmp, avail, alloc;
-
- tmp.start = root->end;
- tmp.end = root->end;
-
- this = find_sibling_prev(root, NULL);
- for (;;) {
- if (this) {
- if (this->end < root->end)
- tmp.start = this->end + 1;
- } else
- tmp.start = root->start;
-
- resource_clip(&tmp, min, max);
-
- /* Check for overflow after ALIGN() */
- avail = *new;
- avail.start = ALIGN(tmp.start, align);
- avail.end = tmp.end;
- if (avail.start >= tmp.start) {
- alloc.start = alignf(alignf_data, &avail, size, align);
- alloc.end = alloc.start + size - 1;
- if (resource_contains(&avail, &alloc)) {
- new->start = alloc.start;
- new->end = alloc.end;
- return 0;
- }
- }
-
- if (!this || this->start == root->start)
- break;
-
- tmp.end = this->start - 1;
- this = find_sibling_prev(root, this);
- }
- return -EBUSY;
-}
-
-/*
- * Find empty slot in the resource tree given range and alignment.
- * This version allocates from the beginning of the root resource first.
*/
static int find_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
struct resource *this = root->child;
struct resource tmp = *new, avail, alloc;
+ tmp.flags = new->flags;
tmp.start = root->start;
/*
- * Skip past an allocated resource that starts at 0, since the
- * assignment of this->start - 1 to tmp->end below would cause an
- * underflow.
+ * Skip past an allocated resource that starts at 0, since the assignment
+ * of this->start - 1 to tmp->end below would cause an underflow.
*/
if (this && this->start == 0) {
tmp.start = this->end + 1;
this = this->sibling;
}
- for (;;) {
+ for(;;) {
if (this)
tmp.end = this->start - 1;
else
tmp.end = root->end;
resource_clip(&tmp, min, max);
+ arch_remove_reservations(&tmp);
/* Check for overflow after ALIGN() */
avail = *new;
return 0;
}
}
-
if (!this)
break;
-
tmp.start = this->end + 1;
this = this->sibling;
}
alignf = simple_align_resource;
write_lock(&resource_lock);
- if (resource_alloc_from_bottom)
- err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
- else
- err = find_resource_from_top(root, new, size, min, max, align, alignf, alignf_data);
+ err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
if (err >= 0 && __request_resource(root, new))
err = -EBUSY;
write_unlock(&resource_lock);
static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
-static inline
-void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
-{
- rq->curr->sched_class->check_preempt_curr(rq, p, flags);
- /*
- * A queue event has occurred, and we're going to schedule. In
- * this case, we can save a useless back to back clock update.
- */
- if (test_tsk_need_resched(p))
- rq->skip_clock_update = 1;
-}
+static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags);
static inline int cpu_of(struct rq *rq)
{
#endif /* CONFIG_CGROUP_SCHED */
-static u64 irq_time_cpu(int cpu);
-static void sched_irq_time_avg_update(struct rq *rq, u64 irq_time);
+static void update_rq_clock_task(struct rq *rq, s64 delta);
-inline void update_rq_clock(struct rq *rq)
+static void update_rq_clock(struct rq *rq)
{
- if (!rq->skip_clock_update) {
- int cpu = cpu_of(rq);
- u64 irq_time;
+ s64 delta;
- rq->clock = sched_clock_cpu(cpu);
- irq_time = irq_time_cpu(cpu);
- if (rq->clock - irq_time > rq->clock_task)
- rq->clock_task = rq->clock - irq_time;
+ if (rq->skip_clock_update)
+ return;
- sched_irq_time_avg_update(rq, irq_time);
- }
+ delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
+ rq->clock += delta;
+ update_rq_clock_task(rq, delta);
}
/*
* They are read and saved off onto struct rq in update_rq_clock().
* This may result in other CPU reading this CPU's irq time and can
* race with irq/account_system_vtime on this CPU. We would either get old
- * or new value (or semi updated value on 32 bit) with a side effect of
- * accounting a slice of irq time to wrong task when irq is in progress
- * while we read rq->clock. That is a worthy compromise in place of having
- * locks on each irq in account_system_time.
+ * or new value with a side effect of accounting a slice of irq time to wrong
+ * task when irq is in progress while we read rq->clock. That is a worthy
+ * compromise in place of having locks on each irq in account_system_time.
*/
static DEFINE_PER_CPU(u64, cpu_hardirq_time);
static DEFINE_PER_CPU(u64, cpu_softirq_time);
sched_clock_irqtime = 0;
}
-static u64 irq_time_cpu(int cpu)
+#ifndef CONFIG_64BIT
+static DEFINE_PER_CPU(seqcount_t, irq_time_seq);
+
+static inline void irq_time_write_begin(void)
{
- if (!sched_clock_irqtime)
- return 0;
+ __this_cpu_inc(irq_time_seq.sequence);
+ smp_wmb();
+}
+static inline void irq_time_write_end(void)
+{
+ smp_wmb();
+ __this_cpu_inc(irq_time_seq.sequence);
+}
+
+static inline u64 irq_time_read(int cpu)
+{
+ u64 irq_time;
+ unsigned seq;
+
+ do {
+ seq = read_seqcount_begin(&per_cpu(irq_time_seq, cpu));
+ irq_time = per_cpu(cpu_softirq_time, cpu) +
+ per_cpu(cpu_hardirq_time, cpu);
+ } while (read_seqcount_retry(&per_cpu(irq_time_seq, cpu), seq));
+
+ return irq_time;
+}
+#else /* CONFIG_64BIT */
+static inline void irq_time_write_begin(void)
+{
+}
+
+static inline void irq_time_write_end(void)
+{
+}
+
+static inline u64 irq_time_read(int cpu)
+{
return per_cpu(cpu_softirq_time, cpu) + per_cpu(cpu_hardirq_time, cpu);
}
+#endif /* CONFIG_64BIT */
+/*
+ * Called before incrementing preempt_count on {soft,}irq_enter
+ * and before decrementing preempt_count on {soft,}irq_exit.
+ */
void account_system_vtime(struct task_struct *curr)
{
unsigned long flags;
+ s64 delta;
int cpu;
- u64 now, delta;
if (!sched_clock_irqtime)
return;
local_irq_save(flags);
cpu = smp_processor_id();
- now = sched_clock_cpu(cpu);
- delta = now - per_cpu(irq_start_time, cpu);
- per_cpu(irq_start_time, cpu) = now;
+ delta = sched_clock_cpu(cpu) - __this_cpu_read(irq_start_time);
+ __this_cpu_add(irq_start_time, delta);
+
+ irq_time_write_begin();
/*
* We do not account for softirq time from ksoftirqd here.
* We want to continue accounting softirq time to ksoftirqd thread
* that do not consume any time, but still wants to run.
*/
if (hardirq_count())
- per_cpu(cpu_hardirq_time, cpu) += delta;
+ __this_cpu_add(cpu_hardirq_time, delta);
else if (in_serving_softirq() && !(curr->flags & PF_KSOFTIRQD))
- per_cpu(cpu_softirq_time, cpu) += delta;
+ __this_cpu_add(cpu_softirq_time, delta);
+ irq_time_write_end();
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(account_system_vtime);
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- if (sched_clock_irqtime && sched_feat(NONIRQ_POWER)) {
- u64 delta_irq = curr_irq_time - rq->prev_irq_time;
- rq->prev_irq_time = curr_irq_time;
- sched_rt_avg_update(rq, delta_irq);
- }
+ s64 irq_delta;
+
+ irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
+
+ /*
+ * Since irq_time is only updated on {soft,}irq_exit, we might run into
+ * this case when a previous update_rq_clock() happened inside a
+ * {soft,}irq region.
+ *
+ * When this happens, we stop ->clock_task and only update the
+ * prev_irq_time stamp to account for the part that fit, so that a next
+ * update will consume the rest. This ensures ->clock_task is
+ * monotonic.
+ *
+ * It does however cause some slight miss-attribution of {soft,}irq
+ * time, a more accurate solution would be to update the irq_time using
+ * the current rq->clock timestamp, except that would require using
+ * atomic ops.
+ */
+ if (irq_delta > delta)
+ irq_delta = delta;
+
+ rq->prev_irq_time += irq_delta;
+ delta -= irq_delta;
+ rq->clock_task += delta;
+
+ if (irq_delta && sched_feat(NONIRQ_POWER))
+ sched_rt_avg_update(rq, irq_delta);
}
-#else
+#else /* CONFIG_IRQ_TIME_ACCOUNTING */
-static u64 irq_time_cpu(int cpu)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- return 0;
+ rq->clock_task += delta;
}
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time) { }
-
-#endif
+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
#include "sched_idletask.c"
#include "sched_fair.c"
p->sched_class->prio_changed(rq, p, oldprio, running);
}
+static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
+{
+ const struct sched_class *class;
+
+ if (p->sched_class == rq->curr->sched_class) {
+ rq->curr->sched_class->check_preempt_curr(rq, p, flags);
+ } else {
+ for_each_class(class) {
+ if (class == rq->curr->sched_class)
+ break;
+ if (class == p->sched_class) {
+ resched_task(rq->curr);
+ break;
+ }
+ }
+ }
+
+ /*
+ * A queue event has occurred, and we're going to schedule. In
+ * this case, we can save a useless back to back clock update.
+ */
+ if (rq->curr->se.on_rq && test_tsk_need_resched(rq->curr))
+ rq->skip_clock_update = 1;
+}
+
#ifdef CONFIG_SMP
/*
* Is this task likely cache-hot:
return delta;
}
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+ load *= exp;
+ load += active * (FIXED_1 - exp);
+ load += 1UL << (FSHIFT - 1);
+ return load >> FSHIFT;
+}
+
#ifdef CONFIG_NO_HZ
/*
* For NO_HZ we delay the active fold to the next LOAD_FREQ update.
return delta;
}
+
+/**
+ * fixed_power_int - compute: x^n, in O(log n) time
+ *
+ * @x: base of the power
+ * @frac_bits: fractional bits of @x
+ * @n: power to raise @x to.
+ *
+ * By exploiting the relation between the definition of the natural power
+ * function: x^n := x*x*...*x (x multiplied by itself for n times), and
+ * the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
+ * (where: n_i \elem {0, 1}, the binary vector representing n),
+ * we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
+ * of course trivially computable in O(log_2 n), the length of our binary
+ * vector.
+ */
+static unsigned long
+fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
+{
+ unsigned long result = 1UL << frac_bits;
+
+ if (n) for (;;) {
+ if (n & 1) {
+ result *= x;
+ result += 1UL << (frac_bits - 1);
+ result >>= frac_bits;
+ }
+ n >>= 1;
+ if (!n)
+ break;
+ x *= x;
+ x += 1UL << (frac_bits - 1);
+ x >>= frac_bits;
+ }
+
+ return result;
+}
+
+/*
+ * a1 = a0 * e + a * (1 - e)
+ *
+ * a2 = a1 * e + a * (1 - e)
+ * = (a0 * e + a * (1 - e)) * e + a * (1 - e)
+ * = a0 * e^2 + a * (1 - e) * (1 + e)
+ *
+ * a3 = a2 * e + a * (1 - e)
+ * = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
+ * = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
+ *
+ * ...
+ *
+ * an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
+ * = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
+ * = a0 * e^n + a * (1 - e^n)
+ *
+ * [1] application of the geometric series:
+ *
+ * n 1 - x^(n+1)
+ * S_n := \Sum x^i = -------------
+ * i=0 1 - x
+ */
+static unsigned long
+calc_load_n(unsigned long load, unsigned long exp,
+ unsigned long active, unsigned int n)
+{
+
+ return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
+}
+
+/*
+ * NO_HZ can leave us missing all per-cpu ticks calling
+ * calc_load_account_active(), but since an idle CPU folds its delta into
+ * calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
+ * in the pending idle delta if our idle period crossed a load cycle boundary.
+ *
+ * Once we've updated the global active value, we need to apply the exponential
+ * weights adjusted to the number of cycles missed.
+ */
+static void calc_global_nohz(unsigned long ticks)
+{
+ long delta, active, n;
+
+ if (time_before(jiffies, calc_load_update))
+ return;
+
+ /*
+ * If we crossed a calc_load_update boundary, make sure to fold
+ * any pending idle changes, the respective CPUs might have
+ * missed the tick driven calc_load_account_active() update
+ * due to NO_HZ.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
+ /*
+ * If we were idle for multiple load cycles, apply them.
+ */
+ if (ticks >= LOAD_FREQ) {
+ n = ticks / LOAD_FREQ;
+
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
+
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+
+ calc_load_update += n * LOAD_FREQ;
+ }
+
+ /*
+ * Its possible the remainder of the above division also crosses
+ * a LOAD_FREQ period, the regular check in calc_global_load()
+ * which comes after this will take care of that.
+ *
+ * Consider us being 11 ticks before a cycle completion, and us
+ * sleeping for 4*LOAD_FREQ + 22 ticks, then the above code will
+ * age us 4 cycles, and the test in calc_global_load() will
+ * pick up the final one.
+ */
+}
#else
static void calc_load_account_idle(struct rq *this_rq)
{
{
return 0;
}
+
+static void calc_global_nohz(unsigned long ticks)
+{
+}
#endif
/**
loads[2] = (avenrun[2] + offset) << shift;
}
-static unsigned long
-calc_load(unsigned long load, unsigned long exp, unsigned long active)
-{
- load *= exp;
- load += active * (FIXED_1 - exp);
- return load >> FSHIFT;
-}
-
/*
* calc_load - update the avenrun load estimates 10 ticks after the
* CPUs have updated calc_load_tasks.
*/
-void calc_global_load(void)
+void calc_global_load(unsigned long ticks)
{
- unsigned long upd = calc_load_update + 10;
long active;
- if (time_before(jiffies, upd))
+ calc_global_nohz(ticks);
+
+ if (time_before(jiffies, calc_load_update + 10))
return;
active = atomic_long_read(&calc_load_tasks);
{
if (prev->se.on_rq)
update_rq_clock(rq);
- rq->skip_clock_update = 0;
prev->sched_class->put_prev_task(rq, prev);
}
hrtick_clear(rq);
raw_spin_lock_irq(&rq->lock);
- clear_tsk_need_resched(prev);
switch_count = &prev->nivcsw;
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
put_prev_task(rq, prev);
next = pick_next_task(rq);
+ clear_tsk_need_resched(prev);
+ rq->skip_clock_update = 0;
if (likely(prev != next)) {
sched_info_switch(prev, next);
if (cpu != group_first_cpu(sd->groups))
return;
+ sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups));
+
child = sd->child;
sd->groups->cpu_power = 0;
struct cfs_rq *cfs_rq = task_cfs_rq(curr);
int scale = cfs_rq->nr_running >= sched_nr_latency;
- if (unlikely(rt_prio(p->prio)))
- goto preempt;
-
- if (unlikely(p->sched_class != &fair_sched_class))
- return;
-
if (unlikely(se == pse))
return;
set_task_cpu(p, this_cpu);
activate_task(this_rq, p, 0);
check_preempt_curr(this_rq, p, 0);
-
- /* re-arm NEWIDLE balancing when moving tasks */
- src_rq->avg_idle = this_rq->avg_idle = 2*sysctl_sched_migration_cost;
- this_rq->idle_stamp = 0;
}
/*
unsigned long this_load_per_task;
unsigned long this_nr_running;
unsigned long this_has_capacity;
+ unsigned int this_idle_cpus;
/* Statistics of the busiest group */
+ unsigned int busiest_idle_cpus;
unsigned long max_load;
unsigned long busiest_load_per_task;
unsigned long busiest_nr_running;
unsigned long busiest_group_capacity;
unsigned long busiest_has_capacity;
+ unsigned int busiest_group_weight;
int group_imb; /* Is there imbalance in this sd */
#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
unsigned long sum_nr_running; /* Nr tasks running in the group */
unsigned long sum_weighted_load; /* Weighted load of group's tasks */
unsigned long group_capacity;
+ unsigned long idle_cpus;
+ unsigned long group_weight;
int group_imb; /* Is there an imbalance in the group ? */
int group_has_capacity; /* Is there extra capacity in the group? */
};
sgs->group_load += load;
sgs->sum_nr_running += rq->nr_running;
sgs->sum_weighted_load += weighted_cpuload(i);
-
+ if (idle_cpu(i))
+ sgs->idle_cpus++;
}
/*
sgs->group_capacity = DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
if (!sgs->group_capacity)
sgs->group_capacity = fix_small_capacity(sd, group);
+ sgs->group_weight = group->group_weight;
if (sgs->group_capacity > sgs->sum_nr_running)
sgs->group_has_capacity = 1;
sds->this_nr_running = sgs.sum_nr_running;
sds->this_load_per_task = sgs.sum_weighted_load;
sds->this_has_capacity = sgs.group_has_capacity;
+ sds->this_idle_cpus = sgs.idle_cpus;
} else if (update_sd_pick_busiest(sd, sds, sg, &sgs, this_cpu)) {
sds->max_load = sgs.avg_load;
sds->busiest = sg;
sds->busiest_nr_running = sgs.sum_nr_running;
+ sds->busiest_idle_cpus = sgs.idle_cpus;
sds->busiest_group_capacity = sgs.group_capacity;
sds->busiest_load_per_task = sgs.sum_weighted_load;
sds->busiest_has_capacity = sgs.group_has_capacity;
+ sds->busiest_group_weight = sgs.group_weight;
sds->group_imb = sgs.group_imb;
}
if (sds.this_load >= sds.avg_load)
goto out_balanced;
- if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
- goto out_balanced;
+ /*
+ * In the CPU_NEWLY_IDLE, use imbalance_pct to be conservative.
+ * And to check for busy balance use !idle_cpu instead of
+ * CPU_NOT_IDLE. This is because HT siblings will use CPU_NOT_IDLE
+ * even when they are idle.
+ */
+ if (idle == CPU_NEWLY_IDLE || !idle_cpu(this_cpu)) {
+ if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
+ goto out_balanced;
+ } else {
+ /*
+ * This cpu is idle. If the busiest group load doesn't
+ * have more tasks than the number of available cpu's and
+ * there is no imbalance between this and busiest group
+ * wrt to idle cpu's, it is balanced.
+ */
+ if ((sds.this_idle_cpus <= sds.busiest_idle_cpus + 1) &&
+ sds.busiest_nr_running <= sds.busiest_group_weight)
+ goto out_balanced;
+ }
force_balance:
/* Looks like there is an imbalance. Compute it */
interval = msecs_to_jiffies(sd->balance_interval);
if (time_after(next_balance, sd->last_balance + interval))
next_balance = sd->last_balance + interval;
- if (pulled_task)
+ if (pulled_task) {
+ this_rq->idle_stamp = 0;
break;
+ }
}
raw_spin_lock(&this_rq->lock);
static void
check_preempt_curr_stop(struct rq *rq, struct task_struct *p, int flags)
{
- resched_task(rq->curr); /* we preempt everything */
+ /* we're never preempted */
}
static struct task_struct *pick_next_task_stop(struct rq *rq)
{
struct task_struct *stop = rq->stop;
- if (stop && stop->state == TASK_RUNNING)
+ if (stop && stop->se.on_rq)
return stop;
return NULL;
.extra1 = &zero,
.extra2 = &ten_thousand,
},
-#endif
{
.procname = "dmesg_restrict",
.data = &dmesg_restrict,
.extra1 = &zero,
.extra2 = &one,
},
+#endif
{
.procname = "ngroups_max",
.data = &ngroups_max,
return ret;
}
+#ifdef CONFIG_IA64
+#define TASKSTATS_NEEDS_PADDING 1
+#endif
+
static struct taskstats *mk_reply(struct sk_buff *skb, int type, u32 pid)
{
struct nlattr *na, *ret;
int aggr;
- /* If we don't pad, we end up with alignment on a 4 byte boundary.
- * This causes lots of runtime warnings on systems requiring 8 byte
- * alignment */
- u32 pids[2] = { pid, 0 };
- int pid_size = ALIGN(sizeof(pid), sizeof(long));
-
aggr = (type == TASKSTATS_TYPE_PID)
? TASKSTATS_TYPE_AGGR_PID
: TASKSTATS_TYPE_AGGR_TGID;
+ /*
+ * The taskstats structure is internally aligned on 8 byte
+ * boundaries but the layout of the aggregrate reply, with
+ * two NLA headers and the pid (each 4 bytes), actually
+ * force the entire structure to be unaligned. This causes
+ * the kernel to issue unaligned access warnings on some
+ * architectures like ia64. Unfortunately, some software out there
+ * doesn't properly unroll the NLA packet and assumes that the start
+ * of the taskstats structure will always be 20 bytes from the start
+ * of the netlink payload. Aligning the start of the taskstats
+ * structure breaks this software, which we don't want. So, for now
+ * the alignment only happens on architectures that require it
+ * and those users will have to update to fixed versions of those
+ * packages. Space is reserved in the packet only when needed.
+ * This ifdef should be removed in several years e.g. 2012 once
+ * we can be confident that fixed versions are installed on most
+ * systems. We add the padding before the aggregate since the
+ * aggregate is already a defined type.
+ */
+#ifdef TASKSTATS_NEEDS_PADDING
+ if (nla_put(skb, TASKSTATS_TYPE_NULL, 0, NULL) < 0)
+ goto err;
+#endif
na = nla_nest_start(skb, aggr);
if (!na)
goto err;
- if (nla_put(skb, type, pid_size, pids) < 0)
+
+ if (nla_put(skb, type, sizeof(pid), &pid) < 0)
goto err;
ret = nla_reserve(skb, TASKSTATS_TYPE_STATS, sizeof(struct taskstats));
if (!ret)
return rc;
}
+static size_t taskstats_packet_size(void)
+{
+ size_t size;
+
+ size = nla_total_size(sizeof(u32)) +
+ nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+#ifdef TASKSTATS_NEEDS_PADDING
+ size += nla_total_size(0); /* Padding for alignment */
+#endif
+ return size;
+}
+
static int cmd_attr_pid(struct genl_info *info)
{
struct taskstats *stats;
u32 pid;
int rc;
- size = nla_total_size(sizeof(u32)) +
- nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+ size = taskstats_packet_size();
rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, size);
if (rc < 0)
u32 tgid;
int rc;
- size = nla_total_size(sizeof(u32)) +
- nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+ size = taskstats_packet_size();
rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, size);
if (rc < 0)
/*
* Size includes space for nested attributes
*/
- size = nla_total_size(sizeof(u32)) +
- nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+ size = taskstats_packet_size();
is_thread_group = !!taskstats_tgid_alloc(tsk);
if (is_thread_group) {
struct tvec_base *base = __get_cpu_var(tvec_bases);
unsigned long expires;
+ /*
+ * Pretend that there is no timer pending if the cpu is offline.
+ * Possible pending timers will be migrated later to an active cpu.
+ */
+ if (cpu_is_offline(smp_processor_id()))
+ return now + NEXT_TIMER_MAX_DELTA;
spin_lock(&base->lock);
if (time_before_eq(base->next_timer, base->timer_jiffies))
base->next_timer = __next_timer_interrupt(base);
{
jiffies_64 += ticks;
update_wall_time();
- calc_global_load();
+ calc_global_load(ticks);
}
#ifdef __ARCH_WANT_SYS_ALARM
config FUNCTION_TRACER
bool "Kernel Function Tracer"
depends on HAVE_FUNCTION_TRACER
- select FRAME_POINTER if (!ARM_UNWIND)
+ select FRAME_POINTER if !ARM_UNWIND && !S390
select KALLSYMS
select GENERIC_TRACER
select CONTEXT_SWITCH_TRACER
/* Need to copy one event at a time */
do {
+ /* We need the size of one event, because
+ * rb_advance_reader only advances by one event,
+ * whereas rb_event_ts_length may include the size of
+ * one or two events.
+ * We have already ensured there's enough space if this
+ * is a time extend. */
+ size = rb_event_length(event);
memcpy(bpage->data + pos, rpage->data + rpos, size);
len -= size;
event = rb_reader_event(cpu_buffer);
/* Always keep the time extend and data together */
size = rb_event_ts_length(event);
- } while (len > size);
+ } while (len >= size);
/* update bpage */
local_set(&bpage->commit, pos);
#include <linux/writeback.h>
#include <linux/kallsyms.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/notifier.h>
#include <linux/irqflags.h>
#include <linux/debugfs.h>
__ftrace_trace_stack(global_trace.buffer, flags, 3, preempt_count());
}
+static DEFINE_PER_CPU(int, user_stack_count);
+
void
ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
{
if (unlikely(in_nmi()))
return;
+ /*
+ * prevent recursion, since the user stack tracing may
+ * trigger other kernel events.
+ */
+ preempt_disable();
+ if (__this_cpu_read(user_stack_count))
+ goto out;
+
+ __this_cpu_inc(user_stack_count);
+
+
+
event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
sizeof(*entry), flags, pc);
if (!event)
save_stack_trace_user(&trace);
if (!filter_check_discard(call, entry, buffer, event))
ring_buffer_unlock_commit(buffer, event);
+
+ __this_cpu_dec(user_stack_count);
+
+ out:
+ preempt_enable();
}
#ifdef UNUSED
return count;
}
+static loff_t tracing_seek(struct file *file, loff_t offset, int origin)
+{
+ if (file->f_mode & FMODE_READ)
+ return seq_lseek(file, offset, origin);
+ else
+ return 0;
+}
+
static const struct file_operations tracing_fops = {
.open = tracing_open,
.read = seq_read,
.write = tracing_write_stub,
- .llseek = seq_lseek,
+ .llseek = tracing_seek,
.release = tracing_release,
};
spin_lock_irq(&uidhash_lock);
up = uid_hash_find(uid, hashent);
if (up) {
+ put_user_ns(ns);
key_put(new->uid_keyring);
key_put(new->session_keyring);
kmem_cache_free(uid_cachep, new);
goto out_save;
}
- printk(KERN_ERR "NMI watchdog failed to create perf event on cpu%i: %p\n", cpu, event);
+ printk(KERN_ERR "NMI watchdog disabled for cpu%i: unable to create perf event: %ld\n",
+ cpu, PTR_ERR(event));
return PTR_ERR(event);
/* success path */
{
struct worker *worker = kthread_data(task);
- if (likely(!(worker->flags & WORKER_NOT_RUNNING)))
+ if (!(worker->flags & WORKER_NOT_RUNNING))
atomic_inc(get_gcwq_nr_running(cpu));
}
struct global_cwq *gcwq = get_gcwq(cpu);
atomic_t *nr_running = get_gcwq_nr_running(cpu);
- if (unlikely(worker->flags & WORKER_NOT_RUNNING))
+ if (worker->flags & WORKER_NOT_RUNNING)
return NULL;
/* this can only happen on the local cpu */
system_nrt_wq = alloc_workqueue("events_nrt", WQ_NON_REENTRANT, 0);
system_unbound_wq = alloc_workqueue("events_unbound", WQ_UNBOUND,
WQ_UNBOUND_MAX_ACTIVE);
- BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq);
+ BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq ||
+ !system_unbound_wq);
return 0;
}
early_initcall(init_workqueues);
*
* Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
*/
-#include <linux/kernel.h>
#include <linux/rwsem.h>
#include <linux/mutex.h>
#include <linux/module.h>
{
if (__debug_locks_off()) {
if (!debug_locks_silent) {
- oops_in_progress = 1;
console_verbose();
return 1;
}
/* Successfully isolated */
del_page_from_lru_list(zone, page, page_lru(page));
list_add(&page->lru, migratelist);
- mem_cgroup_del_lru(page);
cc->nr_migratepages++;
/* Avoid isolating too much */
void remove_from_page_cache(struct page *page)
{
struct address_space *mapping = page->mapping;
+ void (*freepage)(struct page *);
BUG_ON(!PageLocked(page));
+ freepage = mapping->a_ops->freepage;
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (freepage)
+ freepage(page);
}
EXPORT_SYMBOL(remove_from_page_cache);
unlock_page(pagecache_page);
put_page(pagecache_page);
}
- unlock_page(page);
+ if (page != pagecache_page)
+ unlock_page(page);
out_mutex:
mutex_unlock(&hugetlb_instantiation_mutex);
/*
* Keep it very simple for now: just lock out ksmd and
* MADV_UNMERGEABLE while any memory is going offline.
+ * mutex_lock_nested() is necessary because lockdep was alarmed
+ * that here we take ksm_thread_mutex inside notifier chain
+ * mutex, and later take notifier chain mutex inside
+ * ksm_thread_mutex to unlock it. But that's safe because both
+ * are inside mem_hotplug_mutex.
*/
- mutex_lock(&ksm_thread_mutex);
+ mutex_lock_nested(&ksm_thread_mutex, SINGLE_DEPTH_NESTING);
break;
case MEM_OFFLINE:
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
int do_swap_account __read_mostly;
-static int really_do_swap_account __initdata = 1; /* for remember boot option*/
+
+/* for remember boot option*/
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+static int really_do_swap_account __initdata = 1;
+#else
+static int really_do_swap_account __initdata = 0;
+#endif
+
#else
#define do_swap_account (0)
#endif
/* "mc" and its members are protected by cgroup_mutex */
static struct move_charge_struct {
- spinlock_t lock; /* for from, to, moving_task */
+ spinlock_t lock; /* for from, to */
struct mem_cgroup *from;
struct mem_cgroup *to;
unsigned long precharge;
unsigned long moved_charge;
unsigned long moved_swap;
struct task_struct *moving_task; /* a task moving charges */
+ struct mm_struct *mm;
wait_queue_head_t waitq; /* a waitq for other context */
} mc = {
.lock = __SPIN_LOCK_UNLOCKED(mc.lock),
rcu_read_lock();
p = rcu_dereference(mm->owner);
- VM_BUG_ON(!p);
/*
- * because we don't have task_lock(), "p" can exit while
- * we're here. In that case, "mem" can point to root
- * cgroup but never be NULL. (and task_struct itself is freed
- * by RCU, cgroup itself is RCU safe.) Then, we have small
- * risk here to get wrong cgroup. But such kind of mis-account
- * by race always happens because we don't have cgroup_mutex().
- * It's overkill and we allow that small race, here.
+ * Because we don't have task_lock(), "p" can exit.
+ * In that case, "mem" can point to root or p can be NULL with
+ * race with swapoff. Then, we have small risk of mis-accouning.
+ * But such kind of mis-account by race always happens because
+ * we don't have cgroup_mutex(). It's overkill and we allo that
+ * small race, here.
+ * (*) swapoff at el will charge against mm-struct not against
+ * task-struct. So, mm->owner can be NULL.
*/
mem = mem_cgroup_from_task(p);
- VM_BUG_ON(!mem);
- if (mem_cgroup_is_root(mem)) {
+ if (!mem || mem_cgroup_is_root(mem)) {
rcu_read_unlock();
goto done;
}
{
VM_BUG_ON(from == to);
VM_BUG_ON(PageLRU(pc->page));
- VM_BUG_ON(!PageCgroupLocked(pc));
+ VM_BUG_ON(!page_is_cgroup_locked(pc));
VM_BUG_ON(!PageCgroupUsed(pc));
VM_BUG_ON(pc->mem_cgroup != from);
unsigned long precharge;
struct vm_area_struct *vma;
- down_read(&mm->mmap_sem);
+ /* We've already held the mmap_sem */
for (vma = mm->mmap; vma; vma = vma->vm_next) {
struct mm_walk mem_cgroup_count_precharge_walk = {
.pmd_entry = mem_cgroup_count_precharge_pte_range,
walk_page_range(vma->vm_start, vma->vm_end,
&mem_cgroup_count_precharge_walk);
}
- up_read(&mm->mmap_sem);
precharge = mc.precharge;
mc.precharge = 0;
mc.moved_swap = 0;
}
+ if (mc.mm) {
+ up_read(&mc.mm->mmap_sem);
+ mmput(mc.mm);
+ }
spin_lock(&mc.lock);
mc.from = NULL;
mc.to = NULL;
- mc.moving_task = NULL;
spin_unlock(&mc.lock);
+ mc.moving_task = NULL;
+ mc.mm = NULL;
mem_cgroup_end_move(from);
memcg_oom_recover(from);
memcg_oom_recover(to);
return 0;
/* We move charges only when we move a owner of the mm */
if (mm->owner == p) {
+ /*
+ * We do all the move charge works under one mmap_sem to
+ * avoid deadlock with down_write(&mmap_sem)
+ * -> try_charge() -> if (mc.moving_task) -> sleep.
+ */
+ down_read(&mm->mmap_sem);
+
VM_BUG_ON(mc.from);
VM_BUG_ON(mc.to);
VM_BUG_ON(mc.precharge);
VM_BUG_ON(mc.moved_charge);
VM_BUG_ON(mc.moved_swap);
VM_BUG_ON(mc.moving_task);
+ VM_BUG_ON(mc.mm);
+
mem_cgroup_start_move(from);
spin_lock(&mc.lock);
mc.from = from;
mc.precharge = 0;
mc.moved_charge = 0;
mc.moved_swap = 0;
- mc.moving_task = current;
spin_unlock(&mc.lock);
+ mc.moving_task = current;
+ mc.mm = mm;
ret = mem_cgroup_precharge_mc(mm);
if (ret)
mem_cgroup_clear_mc();
- }
- mmput(mm);
+ /* We call up_read() and mmput() in clear_mc(). */
+ } else
+ mmput(mm);
}
return ret;
}
struct vm_area_struct *vma;
lru_add_drain_all();
- down_read(&mm->mmap_sem);
+ /* We've already held the mmap_sem */
for (vma = mm->mmap; vma; vma = vma->vm_next) {
int ret;
struct mm_walk mem_cgroup_move_charge_walk = {
*/
break;
}
- up_read(&mm->mmap_sem);
}
static void mem_cgroup_move_task(struct cgroup_subsys *ss,
struct task_struct *p,
bool threadgroup)
{
- struct mm_struct *mm;
-
- if (!mc.to)
+ if (!mc.mm)
/* no need to move charge */
return;
- mm = get_task_mm(p);
- if (mm) {
- mem_cgroup_move_charge(mm);
- mmput(mm);
- }
+ mem_cgroup_move_charge(mc.mm);
mem_cgroup_clear_mc();
}
#else /* !CONFIG_MMU */
};
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+static int __init enable_swap_account(char *s)
+{
+ /* consider enabled if no parameter or 1 is given */
+ if (!s || !strcmp(s, "1"))
+ really_do_swap_account = 1;
+ else if (!strcmp(s, "0"))
+ really_do_swap_account = 0;
+ return 1;
+}
+__setup("swapaccount", enable_swap_account);
static int __init disable_swap_account(char *s)
{
- really_do_swap_account = 0;
+ enable_swap_account("0");
return 1;
}
__setup("noswapaccount", disable_swap_account);
#include <linux/slab.h>
#include <linux/swapops.h>
#include <linux/hugetlb.h>
+#include <linux/memory_hotplug.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
return 1;
/*
- * The lock_system_sleep prevents a race with memory hotplug,
- * because the isolation assumes there's only a single user.
+ * The lock_memory_hotplug prevents a race with memory hotplug.
* This is a big hammer, a better would be nicer.
*/
- lock_system_sleep();
+ lock_memory_hotplug();
/*
* Isolate the page, so that it doesn't get reallocated if it
ret = 1;
}
unset_migratetype_isolate(p);
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
#include "internal.h"
+DEFINE_MUTEX(mem_hotplug_mutex);
+
+void lock_memory_hotplug(void)
+{
+ mutex_lock(&mem_hotplug_mutex);
+
+ /* for exclusive hibernation if CONFIG_HIBERNATION=y */
+ lock_system_sleep();
+}
+
+void unlock_memory_hotplug(void)
+{
+ unlock_system_sleep();
+ mutex_unlock(&mem_hotplug_mutex);
+}
+
+
/* add this memory to iomem resource */
static struct resource *register_memory_resource(u64 start, u64 size)
{
pg_data_t *pgdat;
int ret;
- lock_system_sleep();
+ lock_memory_hotplug();
pgdat = hotadd_new_pgdat(nid, 0);
if (pgdat) {
ret = -ENOMEM;
BUG_ON(ret);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
struct resource *res;
int ret;
- lock_system_sleep();
+ lock_memory_hotplug();
res = register_memory_resource(start, size);
ret = -EEXIST;
release_memory_resource(res);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
if (!test_pages_in_a_zone(start_pfn, end_pfn))
return -EINVAL;
- lock_system_sleep();
+ lock_memory_hotplug();
zone = page_zone(pfn_to_page(start_pfn));
node = zone_to_nid(zone);
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
- unlock_system_sleep();
+ unlock_memory_hotplug();
return 0;
failed_removal:
undo_isolate_page_range(start_pfn, end_pfn);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
goto out;
/* Find the mm_struct */
+ rcu_read_lock();
read_lock(&tasklist_lock);
task = pid ? find_task_by_vpid(pid) : current;
if (!task) {
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
err = -ESRCH;
goto out;
}
mm = get_task_mm(task);
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
err = -EINVAL;
if (!mm)
#include <linux/hugetlb.h>
#include <linux/gfp.h>
+#include <asm/tlbflush.h>
+
#include "internal.h"
#define lru_to_page(_head) (list_entry((_head)->prev, struct page, lru))
unsigned long addr, unsigned long len,
unsigned long vm_flags, struct page **pages)
{
+ int ret;
struct vm_area_struct *vma;
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma->vm_ops = &special_mapping_vmops;
vma->vm_private_data = pages;
- if (unlikely(insert_vm_struct(mm, vma))) {
- kmem_cache_free(vm_area_cachep, vma);
- return -ENOMEM;
- }
+ ret = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+ if (ret)
+ goto out;
+
+ ret = insert_vm_struct(mm, vma);
+ if (ret)
+ goto out;
mm->total_vm += len >> PAGE_SHIFT;
perf_event_mmap(vma);
return 0;
+
+out:
+ kmem_cache_free(vm_area_cachep, vma);
+ return ret;
}
static DEFINE_MUTEX(mm_all_locks_mutex);
* Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
* Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
* Copyright (c) 2002 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (c) 2007-2010 Paul Mundt <lethal@linux-sh.org>
*/
#include <linux/module.h>
{
return vmalloc(size);
}
+EXPORT_SYMBOL(vmalloc_node);
/**
* vzalloc_node - allocate memory on a specific node with zero fill
{
}
+/**
+ * alloc_vm_area - allocate a range of kernel address space
+ * @size: size of the area
+ *
+ * Returns: NULL on failure, vm_struct on success
+ *
+ * This function reserves a range of kernel address space, and
+ * allocates pagetables to map that range. No actual mappings
+ * are created. If the kernel address space is not shared
+ * between processes, it syncs the pagetable across all
+ * processes.
+ */
+struct vm_struct *alloc_vm_area(size_t size)
+{
+ BUG();
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(alloc_vm_area);
+
+void free_vm_area(struct vm_struct *area)
+{
+ BUG();
+}
+EXPORT_SYMBOL_GPL(free_vm_area);
+
int vm_insert_page(struct vm_area_struct *vma, unsigned long addr,
struct page *page)
{
mm->mmap = vma->vm_next;
delete_vma_from_mm(vma);
delete_vma(mm, vma);
+ cond_resched();
}
kleave("");
break; /* We've done our duty */
}
trace_wbc_balance_dirty_wait(&wbc, bdi);
- __set_current_state(TASK_INTERRUPTIBLE);
+ __set_current_state(TASK_UNINTERRUPTIBLE);
io_schedule_timeout(pause);
/*
* only be modified with pm_mutex held, unless the suspend/hibernate code is
* guaranteed not to run in parallel with that modification).
*/
-void set_gfp_allowed_mask(gfp_t mask)
+
+static gfp_t saved_gfp_mask;
+
+void pm_restore_gfp_mask(void)
{
WARN_ON(!mutex_is_locked(&pm_mutex));
- gfp_allowed_mask = mask;
+ if (saved_gfp_mask) {
+ gfp_allowed_mask = saved_gfp_mask;
+ saved_gfp_mask = 0;
+ }
}
-gfp_t clear_gfp_allowed_mask(gfp_t mask)
+void pm_restrict_gfp_mask(void)
{
- gfp_t ret = gfp_allowed_mask;
-
WARN_ON(!mutex_is_locked(&pm_mutex));
- gfp_allowed_mask &= ~mask;
- return ret;
+ WARN_ON(saved_gfp_mask);
+ saved_gfp_mask = gfp_allowed_mask;
+ gfp_allowed_mask &= ~GFP_IOFS;
}
#endif /* CONFIG_PM_SLEEP */
build_zonelist_cache(pgdat);
}
-#ifdef CONFIG_MEMORY_HOTPLUG
- /* Setup real pagesets for the new zone */
- if (data) {
- struct zone *zone = data;
- setup_zone_pageset(zone);
- }
-#endif
-
/*
* Initialize the boot_pagesets that are going to be used
* for bootstrapping processors. The real pagesets for
} else {
/* we have to stop all cpus to guarantee there is no user
of zonelist */
- stop_machine(__build_all_zonelists, data, NULL);
+#ifdef CONFIG_MEMORY_HOTPLUG
+ if (data)
+ setup_zone_pageset((struct zone *)data);
+#endif
+ stop_machine(__build_all_zonelists, NULL, NULL);
/* cpuset refresh routine should be here */
}
vm_total_pages = nr_free_pagecache_pages();
pgd_t *pgd;
unsigned long next;
int err = 0;
- struct vm_area_struct *vma;
if (addr >= end)
return err;
pgd = pgd_offset(walk->mm, addr);
do {
+ struct vm_area_struct *uninitialized_var(vma);
+
next = pgd_addr_end(addr, end);
+#ifdef CONFIG_HUGETLB_PAGE
/*
* handle hugetlb vma individually because pagetable walk for
* the hugetlb page is dependent on the architecture and
* we can't handled it in the same manner as non-huge pages.
*/
vma = find_vma(walk->mm, addr);
-#ifdef CONFIG_HUGETLB_PAGE
if (vma && is_vm_hugetlb_page(vma)) {
if (vma->vm_end < next)
next = vma->vm_end;
/* we're done parsing the input, undefine BUG macro and dump config */
#undef PCPU_SETUP_BUG_ON
- pcpu_dump_alloc_info(KERN_INFO, ai);
+ pcpu_dump_alloc_info(KERN_DEBUG, ai);
pcpu_nr_groups = ai->nr_groups;
pcpu_group_offsets = group_offsets;
kfree(n);
kfree(s);
}
+err:
up_write(&slub_lock);
-err:
if (flags & SLAB_PANIC)
panic("Cannot create slabcache %s\n", name);
else
for_each_free_object(p, s, page->freelist) {
set_bit(slab_index(p, s, addr), map);
- if (!check_object(s, page, p, 0))
+ if (!check_object(s, page, p, SLUB_RED_INACTIVE))
return 0;
}
for_each_object(p, s, addr, page->objects)
if (!test_bit(slab_index(p, s, addr), map))
- if (!check_object(s, page, p, 1))
+ if (!check_object(s, page, p, SLUB_RED_ACTIVE))
return 0;
return 1;
}
x += sprintf(buf + x, " N%d=%lu",
node, nodes[node]);
#endif
+ up_read(&slub_lock);
kfree(nodes);
return x + sprintf(buf + x, "\n");
}
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (mapping->a_ops->freepage)
+ mapping->a_ops->freepage(page);
+
page_cache_release(page); /* pagecache ref */
return 1;
failed:
#include <asm/tlbflush.h>
#include <asm/shmparam.h>
-bool vmap_lazy_unmap __read_mostly = true;
-
/*** Page table manipulation functions ***/
static void vunmap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end)
{
unsigned int log;
- if (!vmap_lazy_unmap)
- return 0;
-
log = fls(num_online_cpus());
return log * (32UL * 1024 * 1024 / PAGE_SIZE);
if (va->va_end > *end)
*end = va->va_end;
nr += (va->va_end - va->va_start) >> PAGE_SHIFT;
- unmap_vmap_area(va);
list_add_tail(&va->purge_list, &valist);
va->flags |= VM_LAZY_FREEING;
va->flags &= ~VM_LAZY_FREE;
}
/*
- * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
- * called for the correct range previously.
+ * Free a vmap area, caller ensuring that the area has been unmapped
+ * and flush_cache_vunmap had been called for the correct range
+ * previously.
*/
-static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+static void free_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
try_purge_vmap_area_lazy();
}
+/*
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
+ */
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+{
+ unmap_vmap_area(va);
+ free_vmap_area_noflush(va);
+}
+
/*
* Free and unmap a vmap area
*/
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area_noflush(vb->va);
+ free_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
rcu_read_unlock();
BUG_ON(!vb);
+ vunmap_page_range((unsigned long)addr, (unsigned long)addr + size);
+
spin_lock(&vb->lock);
BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order));
s = vb->va->va_start + (i << PAGE_SHIFT);
e = vb->va->va_start + (j << PAGE_SHIFT);
- vunmap_page_range(s, e);
flush = 1;
if (s < start)
spin_unlock_irq(&mapping->tree_lock);
swapcache_free(swap, page);
} else {
+ void (*freepage)(struct page *);
+
+ freepage = mapping->a_ops->freepage;
+
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (freepage != NULL)
+ freepage(page);
}
return 1;
"nr_shmem",
"nr_dirtied",
"nr_written",
- "nr_dirty_threshold",
- "nr_dirty_background_threshold",
#ifdef CONFIG_NUMA
"numa_hit",
"numa_local",
"numa_other",
#endif
+ "nr_dirty_threshold",
+ "nr_dirty_background_threshold",
#ifdef CONFIG_VM_EVENT_COUNTERS
"pgpgin",
.dev_uevent = atm_uevent,
};
-int atm_register_sysfs(struct atm_dev *adev)
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent)
{
struct device *cdev = &adev->class_dev;
int i, j, err;
cdev->class = &atm_class;
+ cdev->parent = parent;
dev_set_drvdata(cdev, adev);
dev_set_name(cdev, "%s%d", adev->type, adev->number);
}
EXPORT_SYMBOL(atm_dev_lookup);
-struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
- int number, unsigned long *flags)
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+ const struct atmdev_ops *ops, int number,
+ unsigned long *flags)
{
struct atm_dev *dev, *inuse;
goto out_fail;
}
- if (atm_register_sysfs(dev) < 0) {
+ if (atm_register_sysfs(dev, parent) < 0) {
pr_err("atm_register_sysfs failed for dev %s\n", type);
atm_proc_dev_deregister(dev);
goto out_fail;
#endif /* CONFIG_PROC_FS */
-int atm_register_sysfs(struct atm_dev *adev);
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent);
void atm_unregister_sysfs(struct atm_dev *adev);
#endif
d->state = BT_OPEN;
d->flags = 0;
d->mscex = 0;
+ d->sec_level = BT_SECURITY_LOW;
d->mtu = RFCOMM_DEFAULT_MTU;
d->v24_sig = RFCOMM_V24_RTC | RFCOMM_V24_RTR | RFCOMM_V24_DV;
int lm = 0;
if (type != SCO_LINK && type != ESCO_LINK)
- return 0;
+ return -EINVAL;
BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr));
BT_DBG("hcon %p bdaddr %s status %d", hcon, batostr(&hcon->dst), status);
if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
- return 0;
+ return -EINVAL;
if (!status) {
struct sco_conn *conn;
BT_DBG("hcon %p reason %d", hcon, reason);
if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
- return 0;
+ return -EINVAL;
sco_conn_del(hcon, bt_err(reason));
ip6h = ipv6_hdr(skb);
*(__force __be32 *)ip6h = htonl(0x60000000);
- ip6h->payload_len = 8 + sizeof(*mldq);
+ ip6h->payload_len = htons(8 + sizeof(*mldq));
ip6h->nexthdr = IPPROTO_HOPOPTS;
ip6h->hop_limit = 1;
ipv6_addr_set(&ip6h->saddr, 0, 0, 0, 0);
struct net_bridge_port *port,
struct sk_buff *skb)
{
- struct sk_buff *skb2 = skb;
+ struct sk_buff *skb2;
struct ipv6hdr *ip6h;
struct icmp6hdr *icmp6h;
u8 nexthdr;
if (!skb2)
return -ENOMEM;
+ err = -EINVAL;
+ if (!pskb_may_pull(skb2, offset + sizeof(struct icmp6hdr)))
+ goto out;
+
len -= offset - skb_network_offset(skb2);
__skb_pull(skb2, offset);
skb_reset_transport_header(skb2);
- err = -EINVAL;
- if (!pskb_may_pull(skb2, sizeof(*icmp6h)))
- goto out;
-
icmp6h = icmp6_hdr(skb2);
switch (icmp6h->icmp6_type) {
switch (icmp6h->icmp6_type) {
case ICMPV6_MGM_REPORT:
{
- struct mld_msg *mld = (struct mld_msg *)icmp6h;
+ struct mld_msg *mld;
+ if (!pskb_may_pull(skb2, sizeof(*mld))) {
+ err = -EINVAL;
+ goto out;
+ }
+ mld = (struct mld_msg *)skb_transport_header(skb2);
BR_INPUT_SKB_CB(skb2)->mrouters_only = 1;
err = br_ip6_multicast_add_group(br, port, &mld->mld_mca);
break;
break;
case ICMPV6_MGM_REDUCTION:
{
- struct mld_msg *mld = (struct mld_msg *)icmp6h;
+ struct mld_msg *mld;
+ if (!pskb_may_pull(skb2, sizeof(*mld))) {
+ err = -EINVAL;
+ goto out;
+ }
+ mld = (struct mld_msg *)skb_transport_header(skb2);
br_ip6_multicast_leave_group(br, port, &mld->mld_mca);
}
}
out:
- __skb_push(skb2, offset);
- if (skb2 != skb)
- kfree_skb(skb2);
+ kfree_skb(skb2);
return err;
}
#endif
llc_mac_hdr_init(skb, p->dev->dev_addr, p->br->group_addr);
+ skb_reset_mac_header(skb);
+
NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
dev_queue_xmit);
}
struct list_head tx_ops;
unsigned long dropped_usr_msgs;
struct proc_dir_entry *bcm_proc_read;
- char procname [20]; /* pointer printed in ASCII with \0 */
+ char procname [32]; /* inode number in decimal with \0 */
};
static inline struct bcm_sock *bcm_sk(const struct sock *sk)
if (proc_dir) {
/* unique socket address as filename */
- sprintf(bo->procname, "%p", sock);
+ sprintf(bo->procname, "%lu", sock_i_ino(sk));
bo->bcm_proc_read = proc_create_data(bo->procname, 0644,
proc_dir,
&bcm_proc_fops, sk);
#
# Makefile for CEPH filesystem.
#
-
-ifneq ($(KERNELRELEASE),)
-
obj-$(CONFIG_CEPH_LIB) += libceph.o
libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
ceph_fs.o ceph_strings.o ceph_hash.o \
pagevec.o
-else
-#Otherwise we were called directly from the command
-# line; invoke the kernel build system.
-
-KERNELDIR ?= /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default: all
-
-all:
- $(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules
-
-modules_install:
- $(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules_install
-
-clean:
- $(MAKE) -C $(KERNELDIR) M=$(PWD) clean
-
-endif
if (b->vec.iov_base) {
b->is_vmalloc = false;
} else {
- b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
+ b->vec.iov_base = __vmalloc(len, gfp | __GFP_HIGHMEM, PAGE_KERNEL);
if (!b->vec.iov_base) {
kfree(b);
return NULL;
int ceph_msgr_init(void)
{
ceph_msgr_wq = create_workqueue("ceph-msgr");
- if (IS_ERR(ceph_msgr_wq)) {
- int ret = PTR_ERR(ceph_msgr_wq);
- pr_err("msgr_init failed to create workqueue: %d\n", ret);
- ceph_msgr_wq = NULL;
- return ret;
+ if (!ceph_msgr_wq) {
+ pr_err("msgr_init failed to create workqueue\n");
+ return -ENOMEM;
}
return 0;
}
/* initialize page iterator */
con->out_msg_pos.page = 0;
if (m->pages)
- con->out_msg_pos.page_pos =
- le16_to_cpu(m->hdr.data_off) & ~PAGE_MASK;
+ con->out_msg_pos.page_pos = m->page_alignment;
else
con->out_msg_pos.page_pos = 0;
con->out_msg_pos.data_pos = 0;
struct ceph_msg *m = con->in_msg;
int ret;
int to, left;
- unsigned front_len, middle_len, data_len, data_off;
+ unsigned front_len, middle_len, data_len;
int datacrc = con->msgr->nocrc;
int skip;
u64 seq;
data_len = le32_to_cpu(con->in_hdr.data_len);
if (data_len > CEPH_MSG_MAX_DATA_LEN)
return -EIO;
- data_off = le16_to_cpu(con->in_hdr.data_off);
/* verify seq# */
seq = le64_to_cpu(con->in_hdr.seq);
if ((s64)seq - (s64)con->in_seq < 1) {
- pr_info("skipping %s%lld %s seq %lld, expected %lld\n",
+ pr_info("skipping %s%lld %s seq %lld expected %lld\n",
ENTITY_NAME(con->peer_name),
ceph_pr_addr(&con->peer_addr.in_addr),
seq, con->in_seq + 1);
con->in_base_pos = -front_len - middle_len - data_len -
sizeof(m->footer);
con->in_tag = CEPH_MSGR_TAG_READY;
- con->in_seq++;
return 0;
} else if ((s64)seq - (s64)con->in_seq > 1) {
pr_err("read_partial_message bad seq %lld expected %lld\n",
con->in_msg_pos.page = 0;
if (m->pages)
- con->in_msg_pos.page_pos = data_off & ~PAGE_MASK;
+ con->in_msg_pos.page_pos = m->page_alignment;
else
con->in_msg_pos.page_pos = 0;
con->in_msg_pos.data_pos = 0;
/* data */
m->nr_pages = 0;
+ m->page_alignment = 0;
m->pages = NULL;
m->pagelist = NULL;
m->bio = NULL;
type, front_len);
return NULL;
}
+ msg->page_alignment = le16_to_cpu(hdr->data_off);
}
memcpy(&msg->hdr, &con->in_hdr, sizeof(con->in_hdr));
op->extent.length = objlen;
}
req->r_num_pages = calc_pages_for(off, *plen);
+ req->r_page_alignment = off & ~PAGE_MASK;
if (op->op == CEPH_OSD_OP_WRITE)
op->payload_len = *plen;
req->r_request->hdr.data_len = cpu_to_le32(data_len);
}
+ req->r_request->page_alignment = req->r_page_alignment;
+
BUG_ON(p > msg->front.iov_base + msg->front.iov_len);
msg_size = p - msg->front.iov_base;
msg->front.iov_len = msg_size;
u32 truncate_seq,
u64 truncate_size,
struct timespec *mtime,
- bool use_mempool, int num_reply)
+ bool use_mempool, int num_reply,
+ int page_align)
{
struct ceph_osd_req_op ops[3];
struct ceph_osd_request *req;
calc_layout(osdc, vino, layout, off, plen, req, ops);
req->r_file_layout = *layout; /* keep a copy */
+ /* in case it differs from natural alignment that calc_layout
+ filled in for us */
+ req->r_page_alignment = page_align;
+
ceph_osdc_build_request(req, off, plen, ops,
snapc,
mtime,
struct ceph_vino vino, struct ceph_file_layout *layout,
u64 off, u64 *plen,
u32 truncate_seq, u64 truncate_size,
- struct page **pages, int num_pages)
+ struct page **pages, int num_pages, int page_align)
{
struct ceph_osd_request *req;
int rc = 0;
req = ceph_osdc_new_request(osdc, layout, vino, off, plen,
CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
NULL, 0, truncate_seq, truncate_size, NULL,
- false, 1);
+ false, 1, page_align);
if (!req)
return -ENOMEM;
/* it may be a short read due to an object boundary */
req->r_pages = pages;
- dout("readpages final extent is %llu~%llu (%d pages)\n",
- off, *plen, req->r_num_pages);
+ dout("readpages final extent is %llu~%llu (%d pages align %d)\n",
+ off, *plen, req->r_num_pages, page_align);
rc = ceph_osdc_start_request(osdc, req, false);
if (!rc)
{
struct ceph_osd_request *req;
int rc = 0;
+ int page_align = off & ~PAGE_MASK;
BUG_ON(vino.snap != CEPH_NOSNAP);
req = ceph_osdc_new_request(osdc, layout, vino, off, &len,
CEPH_OSD_FLAG_WRITE,
snapc, do_sync,
truncate_seq, truncate_size, mtime,
- nofail, 1);
+ nofail, 1, page_align);
if (!req)
return -ENOMEM;
m = ceph_msg_get(req->r_reply);
if (data_len > 0) {
- unsigned data_off = le16_to_cpu(hdr->data_off);
- int want = calc_pages_for(data_off & ~PAGE_MASK, data_len);
+ int want = calc_pages_for(req->r_page_alignment, data_len);
if (unlikely(req->r_num_pages < want)) {
pr_warning("tid %lld reply %d > expected %d pages\n",
}
m->pages = req->r_pages;
m->nr_pages = req->r_num_pages;
+ m->page_alignment = req->r_page_alignment;
#ifdef CONFIG_BLOCK
m->bio = req->r_bio;
#endif
* build a vector of user pages
*/
struct page **ceph_get_direct_page_vector(const char __user *data,
- int num_pages,
- loff_t off, size_t len)
+ int num_pages, bool write_page)
{
struct page **pages;
int rc;
down_read(¤t->mm->mmap_sem);
rc = get_user_pages(current, current->mm, (unsigned long)data,
- num_pages, 0, 0, pages, NULL);
+ num_pages, write_page, 0, pages, NULL);
up_read(¤t->mm->mmap_sem);
- if (rc < 0)
+ if (rc < num_pages)
goto fail;
return pages;
fail:
- kfree(pages);
+ ceph_put_page_vector(pages, rc > 0 ? rc : 0, false);
return ERR_PTR(rc);
}
EXPORT_SYMBOL(ceph_get_direct_page_vector);
-void ceph_put_page_vector(struct page **pages, int num_pages)
+void ceph_put_page_vector(struct page **pages, int num_pages, bool dirty)
{
int i;
- for (i = 0; i < num_pages; i++)
+ for (i = 0; i < num_pages; i++) {
+ if (dirty)
+ set_page_dirty_lock(pages[i]);
put_page(pages[i]);
+ }
kfree(pages);
}
EXPORT_SYMBOL(ceph_put_page_vector);
{
int ret = 0;
- if (rule->iifindex && (rule->iifindex != fl->iif) &&
- !(fl->flags & FLOWI_FLAG_MATCH_ANY_IIF))
+ if (rule->iifindex && (rule->iifindex != fl->iif))
goto out;
if (rule->oifindex && (rule->oifindex != fl->oif))
EXPORT_SYMBOL(sk_chk_filter);
/**
- * sk_filter_rcu_release: Release a socket filter by rcu_head
+ * sk_filter_release_rcu - Release a socket filter by rcu_head
* @rcu: rcu_head that contains the sk_filter to free
*/
-static void sk_filter_rcu_release(struct rcu_head *rcu)
+void sk_filter_release_rcu(struct rcu_head *rcu)
{
struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
- sk_filter_release(fp);
-}
-
-static void sk_filter_delayed_uncharge(struct sock *sk, struct sk_filter *fp)
-{
- unsigned int size = sk_filter_len(fp);
-
- atomic_sub(size, &sk->sk_omem_alloc);
- call_rcu_bh(&fp->rcu, sk_filter_rcu_release);
+ kfree(fp);
}
+EXPORT_SYMBOL(sk_filter_release_rcu);
/**
* sk_attach_filter - attach a socket filter
rcu_assign_pointer(sk->sk_filter, fp);
if (old_fp)
- sk_filter_delayed_uncharge(sk, old_fp);
+ sk_filter_uncharge(sk, old_fp);
return 0;
}
EXPORT_SYMBOL_GPL(sk_attach_filter);
sock_owned_by_user(sk));
if (filter) {
rcu_assign_pointer(sk->sk_filter, NULL);
- sk_filter_delayed_uncharge(sk, filter);
+ sk_filter_uncharge(sk, filter);
ret = 0;
}
return ret;
map = rcu_dereference_raw(queue->rps_map);
- if (map)
+ if (map) {
+ RCU_INIT_POINTER(queue->rps_map, NULL);
call_rcu(&map->rcu, rps_map_release);
+ }
flow_table = rcu_dereference_raw(queue->rps_flow_table);
- if (flow_table)
+ if (flow_table) {
+ RCU_INIT_POINTER(queue->rps_flow_table, NULL);
call_rcu(&flow_table->rcu, rps_dev_flow_table_release);
+ }
if (atomic_dec_and_test(&first->count))
kfree(first);
+ else
+ memset(kobj, 0, sizeof(*kobj));
}
static struct kobj_type rx_queue_ktype = {
nr_table_entries = roundup_pow_of_two(nr_table_entries + 1);
lopt_size += nr_table_entries * sizeof(struct request_sock *);
if (lopt_size > PAGE_SIZE)
- lopt = __vmalloc(lopt_size,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
- PAGE_KERNEL);
+ lopt = vzalloc(lopt_size);
else
lopt = kzalloc(lopt_size, GFP_KERNEL);
if (lopt == NULL)
#endif
}
+/*
+ * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes
+ * un-modified. Special care is taken when initializing object to zero.
+ */
+static inline void sk_prot_clear_nulls(struct sock *sk, int size)
+{
+ if (offsetof(struct sock, sk_node.next) != 0)
+ memset(sk, 0, offsetof(struct sock, sk_node.next));
+ memset(&sk->sk_node.pprev, 0,
+ size - offsetof(struct sock, sk_node.pprev));
+}
+
+void sk_prot_clear_portaddr_nulls(struct sock *sk, int size)
+{
+ unsigned long nulls1, nulls2;
+
+ nulls1 = offsetof(struct sock, __sk_common.skc_node.next);
+ nulls2 = offsetof(struct sock, __sk_common.skc_portaddr_node.next);
+ if (nulls1 > nulls2)
+ swap(nulls1, nulls2);
+
+ if (nulls1 != 0)
+ memset((char *)sk, 0, nulls1);
+ memset((char *)sk + nulls1 + sizeof(void *), 0,
+ nulls2 - nulls1 - sizeof(void *));
+ memset((char *)sk + nulls2 + sizeof(void *), 0,
+ size - nulls2 - sizeof(void *));
+}
+EXPORT_SYMBOL(sk_prot_clear_portaddr_nulls);
+
static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
int family)
{
if (!sk)
return sk;
if (priority & __GFP_ZERO) {
- /*
- * caches using SLAB_DESTROY_BY_RCU should let
- * sk_node.next un-modified. Special care is taken
- * when initializing object to zero.
- */
- if (offsetof(struct sock, sk_node.next) != 0)
- memset(sk, 0, offsetof(struct sock, sk_node.next));
- memset(&sk->sk_node.pprev, 0,
- prot->obj_size - offsetof(struct sock,
- sk_node.pprev));
+ if (prot->clear_sk)
+ prot->clear_sk(sk, prot->obj_size);
+ else
+ sk_prot_clear_nulls(sk, prot->obj_size);
}
- }
- else
+ } else
sk = kmalloc(prot->obj_size, priority);
if (sk != NULL) {
struct phy_device *phydev;
unsigned int type;
- skb_push(skb, ETH_HLEN);
+ if (skb_headroom(skb) < ETH_HLEN)
+ return false;
+ __skb_push(skb, ETH_HLEN);
type = classify(skb);
- skb_pull(skb, ETH_HLEN);
+ __skb_pull(skb, ETH_HLEN);
switch (type) {
case PTP_CLASS_V1_IPV4:
dccp_update_gsr(sk, seqno);
if (dh->dccph_type != DCCP_PKT_SYNC &&
- (ackno != DCCP_PKT_WITHOUT_ACK_SEQ))
+ ackno != DCCP_PKT_WITHOUT_ACK_SEQ &&
+ after48(ackno, dp->dccps_gar))
dp->dccps_gar = ackno;
} else {
unsigned long now = jiffies;
if (r_len > sizeof(struct linkinfo_dn))
r_len = sizeof(struct linkinfo_dn);
+ memset(&link, 0, sizeof(link));
+
switch(sock->state) {
case SS_CONNECTING:
link.idn_linkstate = LL_CONNECTING;
#include <linux/skbuff.h>
#include <linux/udp.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <net/sock.h>
#include <net/inet_common.h>
#include <linux/stat.h>
#endif
#ifdef CONFIG_ECONET_AUNUDP
struct msghdr udpmsg;
- struct iovec iov[msg->msg_iovlen+1];
+ struct iovec iov[2];
struct aunhdr ah;
struct sockaddr_in udpdest;
__kernel_size_t size;
- int i;
mm_segment_t oldfs;
+ char *userbuf;
#endif
/*
mutex_lock(&econet_mutex);
- if (saddr == NULL) {
- struct econet_sock *eo = ec_sk(sk);
-
- addr.station = eo->station;
- addr.net = eo->net;
- port = eo->port;
- cb = eo->cb;
- } else {
- if (msg->msg_namelen < sizeof(struct sockaddr_ec)) {
- mutex_unlock(&econet_mutex);
- return -EINVAL;
- }
- addr.station = saddr->addr.station;
- addr.net = saddr->addr.net;
- port = saddr->port;
- cb = saddr->cb;
- }
+ if (saddr == NULL || msg->msg_namelen < sizeof(struct sockaddr_ec)) {
+ mutex_unlock(&econet_mutex);
+ return -EINVAL;
+ }
+ addr.station = saddr->addr.station;
+ addr.net = saddr->addr.net;
+ port = saddr->port;
+ cb = saddr->cb;
/* Look for a device with the right network number. */
dev = net2dev_map[addr.net];
}
}
- if (len + 15 > dev->mtu) {
- mutex_unlock(&econet_mutex);
- return -EMSGSIZE;
- }
-
if (dev->type == ARPHRD_ECONET) {
/* Real hardware Econet. We're not worthy etc. */
#ifdef CONFIG_ECONET_NATIVE
unsigned short proto = 0;
int res;
+ if (len + 15 > dev->mtu) {
+ mutex_unlock(&econet_mutex);
+ return -EMSGSIZE;
+ }
+
dev_hold(dev);
skb = sock_alloc_send_skb(sk, len+LL_ALLOCATED_SPACE(dev),
eb = (struct ec_cb *)&skb->cb;
- /* BUG: saddr may be NULL */
eb->cookie = saddr->cookie;
eb->sec = *saddr;
eb->sent = ec_tx_done;
return -ENETDOWN; /* No socket - can't send */
}
+ if (len > 32768) {
+ err = -E2BIG;
+ goto error;
+ }
+
/* Make up a UDP datagram and hand it off to some higher intellect. */
memset(&udpdest, 0, sizeof(udpdest));
/* tack our header on the front of the iovec */
size = sizeof(struct aunhdr);
- /*
- * XXX: that is b0rken. We can't mix userland and kernel pointers
- * in iovec, since on a lot of platforms copy_from_user() will
- * *not* work with the kernel and userland ones at the same time,
- * regardless of what we do with set_fs(). And we are talking about
- * econet-over-ethernet here, so "it's only ARM anyway" doesn't
- * apply. Any suggestions on fixing that code? -- AV
- */
iov[0].iov_base = (void *)&ah;
iov[0].iov_len = size;
- for (i = 0; i < msg->msg_iovlen; i++) {
- void __user *base = msg->msg_iov[i].iov_base;
- size_t iov_len = msg->msg_iov[i].iov_len;
- /* Check it now since we switch to KERNEL_DS later. */
- if (!access_ok(VERIFY_READ, base, iov_len)) {
- mutex_unlock(&econet_mutex);
- return -EFAULT;
- }
- iov[i+1].iov_base = base;
- iov[i+1].iov_len = iov_len;
- size += iov_len;
+
+ userbuf = vmalloc(len);
+ if (userbuf == NULL) {
+ err = -ENOMEM;
+ goto error;
}
+ iov[1].iov_base = userbuf;
+ iov[1].iov_len = len;
+ err = memcpy_fromiovec(userbuf, msg->msg_iov, len);
+ if (err)
+ goto error_free_buf;
+
/* Get a skbuff (no data, just holds our cb information) */
if ((skb = sock_alloc_send_skb(sk, 0,
msg->msg_flags & MSG_DONTWAIT,
- &err)) == NULL) {
- mutex_unlock(&econet_mutex);
- return err;
- }
+ &err)) == NULL)
+ goto error_free_buf;
eb = (struct ec_cb *)&skb->cb;
udpmsg.msg_name = (void *)&udpdest;
udpmsg.msg_namelen = sizeof(udpdest);
udpmsg.msg_iov = &iov[0];
- udpmsg.msg_iovlen = msg->msg_iovlen + 1;
+ udpmsg.msg_iovlen = 2;
udpmsg.msg_control = NULL;
udpmsg.msg_controllen = 0;
udpmsg.msg_flags=0;
oldfs = get_fs(); set_fs(KERNEL_DS); /* More privs :-) */
err = sock_sendmsg(udpsock, &udpmsg, size);
set_fs(oldfs);
+
+error_free_buf:
+ vfree(userbuf);
#else
err = -EPROTOTYPE;
#endif
+ error:
mutex_unlock(&econet_mutex);
return err;
err = 0;
switch (cmd) {
case SIOCSIFADDR:
+ if (!capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
edev = dev->ec_ptr;
if (edev == NULL) {
/* Magic up a new one. */
{
struct iphdr *ip = ip_hdr(skb);
unsigned char stn = ntohl(ip->saddr) & 0xff;
+ struct dst_entry *dst = skb_dst(skb);
+ struct ec_device *edev = NULL;
struct sock *sk = NULL;
struct sk_buff *newskb;
- struct ec_device *edev = skb->dev->ec_ptr;
+
+ if (dst)
+ edev = dst->dev->ec_ptr;
if (! edev)
goto bad;
.daddr = addr
}
},
- .flags = FLOWI_FLAG_MATCH_ANY_IIF
};
struct fib_result res = { 0 };
struct net_device *dev = NULL;
+ struct fib_table *local_table;
+
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+ res.r = NULL;
+#endif
rcu_read_lock();
- if (fib_lookup(net, &fl, &res)) {
+ local_table = fib_get_table(net, RT_TABLE_LOCAL);
+ if (!local_table ||
+ fib_table_lookup(local_table, &fl, &res, FIB_LOOKUP_NOREF)) {
rcu_read_unlock();
return NULL;
}
if (size <= PAGE_SIZE)
return kzalloc(size, GFP_KERNEL);
else
- return __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+ return vzalloc(size);
}
static void __tnode_vfree(struct work_struct *arg)
/* No need to clone since we're just using its address. */
rt2 = rt;
+ if (!fl.nl_u.ip4_u.saddr)
+ fl.nl_u.ip4_u.saddr = rt->rt_src;
+
err = xfrm_lookup(net, (struct dst_entry **)&rt, &fl, NULL, 0);
switch (err) {
case 0:
}
}
}
- sk_add_bind_node(child, &tb->owners);
- inet_csk(child)->icsk_bind_hash = tb;
+ inet_bind_hash(child, tb, port);
spin_unlock(&head->lock);
return 0;
SNMP_MIB_ITEM("TCPMinTTLDrop", LINUX_MIB_TCPMINTTLDROP),
SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
+ SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
SNMP_MIB_SENTINEL
};
goto out;
/* RACE: Check return value of inet_select_addr instead. */
- if (rcu_dereference(dev_out->ip_ptr) == NULL)
- goto out; /* Wrong error code */
-
+ if (!(dev_out->flags & IFF_UP) || !__in_dev_get_rcu(dev_out)) {
+ err = -ENETUNREACH;
+ goto out;
+ }
if (ipv4_is_local_multicast(oldflp->fl4_dst) ||
ipv4_is_lbcast(oldflp->fl4_dst)) {
if (!fl.fl4_src)
}
if (res.type == RTN_LOCAL) {
- if (!fl.fl4_src)
- fl.fl4_src = fl.fl4_dst;
+ if (!fl.fl4_src) {
+ if (res.fi->fib_prefsrc)
+ fl.fl4_src = res.fi->fib_prefsrc;
+ else
+ fl.fl4_src = fl.fl4_dst;
+ }
dev_out = net->loopback_dev;
fl.oif = dev_out->ifindex;
res.fi = NULL;
static int tcp_retr1_max = 255;
static int ip_local_port_range_min[] = { 1, 1 };
static int ip_local_port_range_max[] = { 65535, 65535 };
+static int tcp_adv_win_scale_min = -31;
+static int tcp_adv_win_scale_max = 31;
/* Update system visible IP port range */
static void set_local_port_range(int range[2])
.data = &sysctl_tcp_adv_win_scale,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &tcp_adv_win_scale_min,
+ .extra2 = &tcp_adv_win_scale_max,
},
{
.procname = "tcp_tw_reuse",
/* Values greater than interface MTU won't take effect. However
* at the point when this call is done we typically don't yet
* know which interface is going to be used */
- if (val < 64 || val > MAX_TCP_WINDOW) {
+ if (val < TCP_MIN_MSS || val > MAX_TCP_WINDOW) {
err = -EINVAL;
break;
}
get_req:
req = icsk->icsk_accept_queue.listen_opt->syn_table[st->sbucket];
}
- sk = sk_next(st->syn_wait_sk);
+ sk = sk_nulls_next(st->syn_wait_sk);
st->state = TCP_SEQ_STATE_LISTENING;
read_unlock_bh(&icsk->icsk_accept_queue.syn_wait_lock);
} else {
if (reqsk_queue_len(&icsk->icsk_accept_queue))
goto start_req;
read_unlock_bh(&icsk->icsk_accept_queue.syn_wait_lock);
- sk = sk_next(sk);
+ sk = sk_nulls_next(sk);
}
get_sk:
sk_nulls_for_each_from(sk, node) {
- if (sk->sk_family == st->family && net_eq(sock_net(sk), net)) {
+ if (!net_eq(sock_net(sk), net))
+ continue;
+ if (sk->sk_family == st->family) {
cur = sk;
goto out;
}
* socket up. We've got bigger problems than
* non-graceful socket closings.
*/
- LIMIT_NETDEBUG(KERN_INFO "TCP: time wait bucket table overflow\n");
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPTIMEWAITOVERFLOW);
}
tcp_update_metrics(sk);
/* when initializing use the value from init_rcv_wnd
* rather than the default from above
*/
- if (init_rcv_wnd &&
- (*rcv_wnd > init_rcv_wnd * mss))
- *rcv_wnd = init_rcv_wnd * mss;
- else if (*rcv_wnd > init_cwnd * mss)
- *rcv_wnd = init_cwnd * mss;
+ if (init_rcv_wnd)
+ *rcv_wnd = min(*rcv_wnd, init_rcv_wnd * mss);
+ else
+ *rcv_wnd = min(*rcv_wnd, init_cwnd * mss);
}
/* Set the clamp no higher than max representable value */
*/
static u8 tcp_cookie_size_check(u8 desired)
{
- if (desired > 0) {
+ int cookie_size;
+
+ if (desired > 0)
/* previously specified */
return desired;
- }
- if (sysctl_tcp_cookie_size <= 0) {
+
+ cookie_size = ACCESS_ONCE(sysctl_tcp_cookie_size);
+ if (cookie_size <= 0)
/* no default specified */
return 0;
- }
- if (sysctl_tcp_cookie_size <= TCP_COOKIE_MIN) {
+
+ if (cookie_size <= TCP_COOKIE_MIN)
/* value too small, specify minimum */
return TCP_COOKIE_MIN;
- }
- if (sysctl_tcp_cookie_size >= TCP_COOKIE_MAX) {
+
+ if (cookie_size >= TCP_COOKIE_MAX)
/* value too large, specify maximum */
return TCP_COOKIE_MAX;
- }
- if (0x1 & sysctl_tcp_cookie_size) {
+
+ if (cookie_size & 1)
/* 8-bit multiple, illegal, fix it */
- return (u8)(sysctl_tcp_cookie_size + 0x1);
- }
- return (u8)sysctl_tcp_cookie_size;
+ cookie_size++;
+
+ return (u8)cookie_size;
}
/* Write previously computed TCP options to the packet.
struct tcp_sock *tp = tcp_sk(sk);
const struct inet_connection_sock *icsk = inet_csk(sk);
u32 send_win, cong_win, limit, in_flight;
+ int win_divisor;
if (TCP_SKB_CB(skb)->flags & TCPHDR_FIN)
goto send_now;
if ((skb != tcp_write_queue_tail(sk)) && (limit >= skb->len))
goto send_now;
- if (sysctl_tcp_tso_win_divisor) {
+ win_divisor = ACCESS_ONCE(sysctl_tcp_tso_win_divisor);
+ if (win_divisor) {
u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
/* If at least some fraction of a window is available,
* just use it.
*/
- chunk /= sysctl_tcp_tso_win_divisor;
+ chunk /= win_divisor;
if (limit >= chunk)
goto send_now;
} else {
.compat_setsockopt = compat_udp_setsockopt,
.compat_getsockopt = compat_udp_getsockopt,
#endif
+ .clear_sk = sk_prot_clear_portaddr_nulls,
};
EXPORT_SYMBOL(udp_prot);
.compat_setsockopt = compat_udp_setsockopt,
.compat_getsockopt = compat_udp_getsockopt,
#endif
+ .clear_sk = sk_prot_clear_portaddr_nulls,
};
EXPORT_SYMBOL(udplite_prot);
#endif
#define INFINITY_LIFE_TIME 0xFFFFFFFF
-#define TIME_DELTA(a, b) ((unsigned long)((long)(a) - (long)(b)))
+
+static inline u32 cstamp_delta(unsigned long cstamp)
+{
+ return (cstamp - INITIAL_JIFFIES) * 100UL / HZ;
+}
#define ADDRCONF_TIMER_FUZZ_MINUS (HZ > 50 ? HZ/50 : 1)
#define ADDRCONF_TIMER_FUZZ (HZ / 4)
ASSERT_RTNL();
- rt6_ifdown(net, dev);
+ /* Flush routes if device is being removed or it is not loopback */
+ if (how || !(dev->flags & IFF_LOOPBACK))
+ rt6_ifdown(net, dev);
neigh_ifdown(&nd_tbl, dev);
idev = __in6_dev_get(dev);
ifa->state = INET6_IFADDR_STATE_DEAD;
spin_unlock_bh(&ifa->state_lock);
- if (state == INET6_IFADDR_STATE_DEAD) {
- in6_ifa_put(ifa);
- } else {
+ if (state != INET6_IFADDR_STATE_DEAD) {
__ipv6_ifa_notify(RTM_DELADDR, ifa);
atomic_notifier_call_chain(&inet6addr_chain,
NETDEV_DOWN, ifa);
}
+
+ in6_ifa_put(ifa);
write_lock_bh(&idev->lock);
}
}
{
struct ifa_cacheinfo ci;
- ci.cstamp = (u32)(TIME_DELTA(cstamp, INITIAL_JIFFIES) / HZ * 100
- + TIME_DELTA(cstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
- ci.tstamp = (u32)(TIME_DELTA(tstamp, INITIAL_JIFFIES) / HZ * 100
- + TIME_DELTA(tstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
+ ci.cstamp = cstamp_delta(cstamp);
+ ci.tstamp = cstamp_delta(tstamp);
ci.ifa_prefered = preferred;
ci.ifa_valid = valid;
array[DEVCONF_AUTOCONF] = cnf->autoconf;
array[DEVCONF_DAD_TRANSMITS] = cnf->dad_transmits;
array[DEVCONF_RTR_SOLICITS] = cnf->rtr_solicits;
- array[DEVCONF_RTR_SOLICIT_INTERVAL] = cnf->rtr_solicit_interval;
- array[DEVCONF_RTR_SOLICIT_DELAY] = cnf->rtr_solicit_delay;
+ array[DEVCONF_RTR_SOLICIT_INTERVAL] =
+ jiffies_to_msecs(cnf->rtr_solicit_interval);
+ array[DEVCONF_RTR_SOLICIT_DELAY] =
+ jiffies_to_msecs(cnf->rtr_solicit_delay);
array[DEVCONF_FORCE_MLD_VERSION] = cnf->force_mld_version;
#ifdef CONFIG_IPV6_PRIVACY
array[DEVCONF_USE_TEMPADDR] = cnf->use_tempaddr;
array[DEVCONF_ACCEPT_RA_PINFO] = cnf->accept_ra_pinfo;
#ifdef CONFIG_IPV6_ROUTER_PREF
array[DEVCONF_ACCEPT_RA_RTR_PREF] = cnf->accept_ra_rtr_pref;
- array[DEVCONF_RTR_PROBE_INTERVAL] = cnf->rtr_probe_interval;
+ array[DEVCONF_RTR_PROBE_INTERVAL] =
+ jiffies_to_msecs(cnf->rtr_probe_interval);
#ifdef CONFIG_IPV6_ROUTE_INFO
array[DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN] = cnf->accept_ra_rt_info_max_plen;
#endif
NLA_PUT_U32(skb, IFLA_INET6_FLAGS, idev->if_flags);
ci.max_reasm_len = IPV6_MAXPLEN;
- ci.tstamp = (__u32)(TIME_DELTA(idev->tstamp, INITIAL_JIFFIES) / HZ * 100
- + TIME_DELTA(idev->tstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
- ci.reachable_time = idev->nd_parms->reachable_time;
- ci.retrans_time = idev->nd_parms->retrans_time;
+ ci.tstamp = cstamp_delta(idev->tstamp);
+ ci.reachable_time = jiffies_to_msecs(idev->nd_parms->reachable_time);
+ ci.retrans_time = jiffies_to_msecs(idev->nd_parms->retrans_time);
NLA_PUT(skb, IFLA_INET6_CACHEINFO, sizeof(ci), &ci);
nla = nla_reserve(skb, IFLA_INET6_CONF, DEVCONF_MAX * sizeof(s32));
kfree_skb(skb);
goto errout;
}
- rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFADDR, NULL, GFP_ATOMIC);
+ rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFINFO, NULL, GFP_ATOMIC);
return;
errout:
if (err < 0)
- rtnl_set_sk_err(net, RTNLGRP_IPV6_IFADDR, err);
+ rtnl_set_sk_err(net, RTNLGRP_IPV6_IFINFO, err);
}
static inline size_t inet6_prefix_nlmsg_size(void)
#include <net/checksum.h>
#include <linux/mroute6.h>
-static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
int __ip6_local_out(struct sk_buff *skb)
{
return -EINVAL;
}
-static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
-{
- struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
-
- return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
- skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
-}
-
static int ip6_finish_output(struct sk_buff *skb)
{
if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
return offset;
}
-static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
{
struct sk_buff *frag;
struct rt6_info *rt = (struct rt6_info*)skb_dst(skb);
sizeof (struct ipv6hdr);
dev->mtu = rt->rt6i_dev->mtu - sizeof (struct ipv6hdr);
+ if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+ dev->mtu-=8;
if (dev->mtu < IPV6_MIN_MTU)
dev->mtu = IPV6_MIN_MTU;
static void ip6_tnl_dev_setup(struct net_device *dev)
{
+ struct ip6_tnl *t;
+
dev->netdev_ops = &ip6_tnl_netdev_ops;
dev->destructor = ip6_dev_free;
dev->type = ARPHRD_TUNNEL6;
dev->hard_header_len = LL_MAX_HEADER + sizeof (struct ipv6hdr);
dev->mtu = ETH_DATA_LEN - sizeof (struct ipv6hdr);
+ t = netdev_priv(dev);
+ if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+ dev->mtu-=8;
dev->flags |= IFF_NOARP;
dev->addr_len = sizeof(struct in6_addr);
dev->features |= NETIF_F_NETNS_LOCAL;
{
struct rt6_info *rt, *nrt;
int allfrag = 0;
-
+again:
rt = rt6_lookup(net, daddr, saddr, ifindex, 0);
if (rt == NULL)
return;
+ if (rt6_check_expired(rt)) {
+ ip6_del_rt(rt);
+ goto again;
+ }
+
if (pmtu >= dst_mtu(&rt->dst))
goto out;
return 0;
}
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
+ /* no tunnel matched, let upstream know, ipsec may handle it */
rcu_read_unlock();
+ return 1;
out:
kfree_skb(skb);
return 0;
.compat_setsockopt = compat_udpv6_setsockopt,
.compat_getsockopt = compat_udpv6_getsockopt,
#endif
+ .clear_sk = sk_prot_clear_portaddr_nulls,
};
static struct inet_protosw udpv6_protosw = {
.compat_setsockopt = compat_udpv6_setsockopt,
.compat_getsockopt = compat_udpv6_getsockopt,
#endif
+ .clear_sk = sk_prot_clear_portaddr_nulls,
};
static struct inet_protosw udplite6_protosw = {
#include <linux/netfilter_ipv6.h>
#include <net/dst.h>
#include <net/ipv6.h>
+#include <net/ip6_route.h>
#include <net/xfrm.h>
int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
return xfrm_output(skb);
}
+static int __xfrm6_output(struct sk_buff *skb)
+{
+ struct dst_entry *dst = skb_dst(skb);
+ struct xfrm_state *x = dst->xfrm;
+
+ if ((x && x->props.mode == XFRM_MODE_TUNNEL) &&
+ ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
+ dst_allfrag(skb_dst(skb)))) {
+ return ip6_fragment(skb, xfrm6_output_finish);
+ }
+ return xfrm6_output_finish(skb);
+}
+
int xfrm6_output(struct sk_buff *skb)
{
return NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL,
- skb_dst(skb)->dev, xfrm6_output_finish);
+ skb_dst(skb)->dev, __xfrm6_output);
}
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/slab.h>
switch (optname) {
case IRLMP_ENUMDEVICES:
+
+ /* Offset to first device entry */
+ offset = sizeof(struct irda_device_list) -
+ sizeof(struct irda_device_info);
+
+ if (len < offset) {
+ err = -EINVAL;
+ goto out;
+ }
+
/* Ask lmp for the current discovery log */
discoveries = irlmp_get_discoveries(&list.len, self->mask.word,
self->nslots);
}
/* Write total list length back to client */
- if (copy_to_user(optval, &list,
- sizeof(struct irda_device_list) -
- sizeof(struct irda_device_info)))
+ if (copy_to_user(optval, &list, offset))
err = -EFAULT;
- /* Offset to first device entry */
- offset = sizeof(struct irda_device_list) -
- sizeof(struct irda_device_info);
-
/* Copy the list itself - watch for overflow */
if (list.len > 2048) {
err = -EINVAL;
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include "irnet_ppp.h" /* Private header */
/* Please put other headers in irnet.h - Thanks */
*/
int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
{
+ int ret;
+
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
IRDA_ASSERT(skb != NULL, return -1;);
IRDA_DEBUG(4, "%s()\n", __func__);
+ /* Take shortcut on zero byte packets */
+ if (skb->len == 0) {
+ ret = 0;
+ goto err;
+ }
+
/* Check that nothing bad happens */
- if ((skb->len == 0) || (!self->connected)) {
- IRDA_DEBUG(1, "%s(), No data, or not connected\n",
- __func__);
+ if (!self->connected) {
+ IRDA_WARNING("%s(), Not connected\n", __func__);
+ ret = -ENOTCONN;
goto err;
}
if (skb->len > self->max_seg_size) {
- IRDA_DEBUG(1, "%s(), UData is too large for IrLAP!\n",
- __func__);
+ IRDA_ERROR("%s(), UData is too large for IrLAP!\n", __func__);
+ ret = -EMSGSIZE;
goto err;
}
err:
dev_kfree_skb(skb);
- return -1;
+ return ret;
}
EXPORT_SYMBOL(irttp_udata_request);
IRDA_DEBUG(2, "%s() : queue len = %d\n", __func__,
skb_queue_len(&self->tx_queue));
+ /* Take shortcut on zero byte packets */
+ if (skb->len == 0) {
+ ret = 0;
+ goto err;
+ }
+
/* Check that nothing bad happens */
- if ((skb->len == 0) || (!self->connected)) {
- IRDA_WARNING("%s: No data, or not connected\n", __func__);
+ if (!self->connected) {
+ IRDA_WARNING("%s: Not connected\n", __func__);
ret = -ENOTCONN;
goto err;
}
MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
MODULE_DESCRIPTION("L2TP over IP");
MODULE_VERSION("1.0");
-MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, SOCK_DGRAM, IPPROTO_L2TP);
+
+/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like
+ * enums
+ */
+MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP);
goto out;
rc = -ENODEV;
rtnl_lock();
+ rcu_read_lock();
if (sk->sk_bound_dev_if) {
- llc->dev = dev_get_by_index(&init_net, sk->sk_bound_dev_if);
+ llc->dev = dev_get_by_index_rcu(&init_net, sk->sk_bound_dev_if);
if (llc->dev) {
if (!addr->sllc_arphrd)
addr->sllc_arphrd = llc->dev->type;
!llc_mac_match(addr->sllc_mac,
llc->dev->dev_addr)) {
rc = -EINVAL;
- dev_put(llc->dev);
llc->dev = NULL;
}
}
} else
llc->dev = dev_getbyhwaddr(&init_net, addr->sllc_arphrd,
addr->sllc_mac);
+ rcu_read_unlock();
rtnl_unlock();
if (!llc->dev)
goto out;
config MAC80211_LEDS
bool "Enable LED triggers"
depends on MAC80211
- select NEW_LEDS
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
---help---
This option enables a few LED triggers for different
mutex_lock(&sdata->u.ibss.mtx);
+ if (!sdata->u.ibss.ssid_len)
+ goto mgmt_out; /* not ready to merge yet */
+
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_PROBE_REQ:
ieee80211_rx_mgmt_probe_req(sdata, mgmt, skb->len);
break;
}
+ mgmt_out:
mutex_unlock(&sdata->u.ibss.mtx);
}
fwd_skb = skb_copy(skb, GFP_ATOMIC);
- if (!fwd_skb && net_ratelimit())
+ if (!fwd_skb && net_ratelimit()) {
printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
sdata->name);
+ goto out;
+ }
fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data;
memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
}
}
+ out:
if (is_multicast_ether_addr(hdr->addr1) ||
sdata->dev->flags & IFF_PROMISC)
return RX_CONTINUE;
break;
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+ if (is_multicast_ether_addr(mgmt->da) &&
+ !is_broadcast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* process only for station */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return RX_DROP_MONITOR;
if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
return;
+ goto out;
}
}
return;
}
+ out:
dev_kfree_skb(skb);
}
list) {
if (!ieee80211_sdata_running(tmp_sdata))
continue;
- if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
+ if (tmp_sdata->vif.type ==
+ NL80211_IFTYPE_MONITOR ||
+ tmp_sdata->vif.type ==
+ NL80211_IFTYPE_AP_VLAN ||
+ tmp_sdata->vif.type ==
+ NL80211_IFTYPE_WDS)
continue;
if (compare_ether_addr(tmp_sdata->vif.addr,
hdr->addr2) == 0) {
int nh_pos, h_pos;
struct sta_info *sta = NULL;
u32 sta_flags = 0;
+ struct sk_buff *tmp_skb;
if (unlikely(skb->len < ETH_HLEN)) {
ret = NETDEV_TX_OK;
goto fail;
}
- nh_pos = skb_network_header(skb) - skb->data;
- h_pos = skb_transport_header(skb) - skb->data;
-
/* convert Ethernet header to proper 802.11 header (based on
* operation mode) */
ethertype = (skb->data[12] << 8) | skb->data[13];
goto fail;
}
+ /*
+ * If the skb is shared we need to obtain our own copy.
+ */
+ if (skb_shared(skb)) {
+ tmp_skb = skb;
+ skb = skb_copy(skb, GFP_ATOMIC);
+ kfree_skb(tmp_skb);
+
+ if (!skb) {
+ ret = NETDEV_TX_OK;
+ goto fail;
+ }
+ }
+
hdr.frame_control = fc;
hdr.duration_id = 0;
hdr.seq_ctrl = 0;
encaps_len = 0;
}
+ nh_pos = skb_network_header(skb) - skb->data;
+ h_pos = skb_transport_header(skb) - skb->data;
+
skb_pull(skb, skip_header_bytes);
nh_pos -= skip_header_bytes;
h_pos -= skip_header_bytes;
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_work *wk;
+ bool cleanup = false;
mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
+ cleanup = true;
wk->type = IEEE80211_WORK_ABORT;
wk->started = true;
wk->timeout = jiffies;
mutex_unlock(&local->mtx);
/* run cleanups etc. */
- ieee80211_work_work(&local->work_work);
+ if (cleanup)
+ ieee80211_work_work(&local->work_work);
mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
menuconfig IP_VS
tristate "IP virtual server support"
depends on NET && INET && NETFILTER
+ depends on (NF_CONNTRACK || NF_CONNTRACK=n)
---help---
IP Virtual Server support will let you build a high-performance
virtual server based on cluster of two or more real servers. This
goto out;
}
- if (args->nr_local > (u64)UINT_MAX) {
+ if (args->nr_local > UIO_MAXIOV) {
ret = -EMSGSIZE;
goto out;
}
/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
d = q->next[q->tail];
q->next[q->tail] = q->next[d];
- q->allot[q->next[d]] += q->quantum;
skb = q->qs[d].prev;
len = qdisc_pkt_len(skb);
__skb_unlink(skb, &q->qs[d]);
sfq_inc(q, x);
if (q->qs[x].qlen == 1) { /* The flow is new */
if (q->tail == SFQ_DEPTH) { /* It is the first flow */
- q->tail = x;
q->next[x] = x;
- q->allot[x] = q->quantum;
} else {
q->next[x] = q->next[q->tail];
q->next[q->tail] = x;
- q->tail = x;
}
+ q->tail = x;
+ q->allot[x] = q->quantum;
}
if (++sch->q.qlen <= q->limit) {
sch->bstats.bytes += qdisc_pkt_len(skb);
{
struct sfq_sched_data *q = qdisc_priv(sch);
struct sk_buff *skb;
- sfq_index a, old_a;
+ sfq_index a, next_a;
/* No active slots */
if (q->tail == SFQ_DEPTH)
return NULL;
- a = old_a = q->next[q->tail];
+ a = q->next[q->tail];
/* Grab packet */
skb = __skb_dequeue(&q->qs[a]);
/* Is the slot empty? */
if (q->qs[a].qlen == 0) {
q->ht[q->hash[a]] = SFQ_DEPTH;
- a = q->next[a];
- if (a == old_a) {
+ next_a = q->next[a];
+ if (a == next_a) {
q->tail = SFQ_DEPTH;
return skb;
}
- q->next[q->tail] = a;
- q->allot[a] += q->quantum;
+ q->next[q->tail] = next_a;
} else if ((q->allot[a] -= qdisc_pkt_len(skb)) <= 0) {
- q->tail = a;
- a = q->next[a];
q->allot[a] += q->quantum;
+ q->tail = a;
}
return skb;
}
struct sctp_association *asoc = NULL;
struct sctp_setpeerprim prim;
struct sctp_chunk *chunk;
+ struct sctp_af *af;
int err;
sp = sctp_sk(sk);
if (!sctp_state(asoc, ESTABLISHED))
return -ENOTCONN;
+ af = sctp_get_af_specific(prim.sspp_addr.ss_family);
+ if (!af)
+ return -EINVAL;
+
+ if (!af->addr_valid((union sctp_addr *)&prim.sspp_addr, sp, NULL))
+ return -EADDRNOTAVAIL;
+
if (!sctp_assoc_lookup_laddr(asoc, (union sctp_addr *)&prim.sspp_addr))
return -EADDRNOTAVAIL;
if (copy_to_user(optval, &val, len))
return -EFAULT;
- return -ENOTSUPP;
+ return 0;
}
/*
return ret;
}
+/**
+ * kernel_recvmsg - Receive a message from a socket (kernel space)
+ * @sock: The socket to receive the message from
+ * @msg: Received message
+ * @vec: Input s/g array for message data
+ * @num: Size of input s/g array
+ * @size: Number of bytes to read
+ * @flags: Message flags (MSG_DONTWAIT, etc...)
+ *
+ * On return the msg structure contains the scatter/gather array passed in the
+ * vec argument. The array is modified so that it consists of the unfilled
+ * portion of the original array.
+ *
+ * The returned value is the total number of bytes received, or an error.
+ */
int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
struct kvec *vec, size_t num, size_t size, int flags)
{
dprint_status(task);
task->tk_status = 0;
- task->tk_action = call_allocate;
- if (status >= 0 && rpcauth_uptodatecred(task))
- return;
+ task->tk_action = call_refresh;
switch (status) {
- case -EACCES:
- rpc_exit(task, -EACCES);
- return;
- case -ENOMEM:
- rpc_exit(task, -ENOMEM);
+ case 0:
+ if (rpcauth_uptodatecred(task))
+ task->tk_action = call_allocate;
return;
case -ETIMEDOUT:
rpc_delay(task, 3*HZ);
+ case -EAGAIN:
+ status = -EACCES;
+ if (!task->tk_cred_retry)
+ break;
+ task->tk_cred_retry--;
+ dprintk("RPC: %5u %s: retry refresh creds\n",
+ task->tk_pid, __func__);
+ return;
}
- task->tk_action = call_refresh;
+ dprintk("RPC: %5u %s: refresh creds failed with error %d\n",
+ task->tk_pid, __func__, status);
+ rpc_exit(task, status);
}
/*
*/
struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt)
{
- struct rpc_iostats *new;
- new = kcalloc(clnt->cl_maxproc, sizeof(struct rpc_iostats), GFP_KERNEL);
- return new;
+ return kcalloc(clnt->cl_maxproc, sizeof(struct rpc_iostats), GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(rpc_alloc_iostats);
*/
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
spin_lock(&svc_xprt_class_lock);
list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
struct svc_xprt *newxprt;
+ unsigned short newport;
if (strcmp(xprt_name, xcl->xcl_name))
continue;
spin_lock_bh(&serv->sv_lock);
list_add(&newxprt->xpt_list, &serv->sv_permsocks);
spin_unlock_bh(&serv->sv_lock);
+ newport = svc_xprt_local_port(newxprt);
clear_bit(XPT_BUSY, &newxprt->xpt_flags);
- return svc_xprt_local_port(newxprt);
+ return newport;
}
err:
spin_unlock(&svc_xprt_class_lock);
{
BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
xprt->xpt_pool = NULL;
+ /* As soon as we clear busy, the xprt could be closed and
+ * 'put', so we need a reference to call svc_xprt_enqueue with:
+ */
+ svc_xprt_get(xprt);
clear_bit(XPT_BUSY, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
+ svc_xprt_put(xprt);
}
EXPORT_SYMBOL_GPL(svc_xprt_received);
sock_wfree(skb);
}
+#define MAX_RECURSION_LEVEL 4
+
static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
{
int i;
+ unsigned char max_level = 0;
+ int unix_sock_count = 0;
+
+ for (i = scm->fp->count - 1; i >= 0; i--) {
+ struct sock *sk = unix_get_socket(scm->fp->fp[i]);
+
+ if (sk) {
+ unix_sock_count++;
+ max_level = max(max_level,
+ unix_sk(sk)->recursion_level);
+ }
+ }
+ if (unlikely(max_level > MAX_RECURSION_LEVEL))
+ return -ETOOMANYREFS;
/*
* Need to duplicate file references for the sake of garbage
if (!UNIXCB(skb).fp)
return -ENOMEM;
- for (i = scm->fp->count-1; i >= 0; i--)
- unix_inflight(scm->fp->fp[i]);
- return 0;
+ if (unix_sock_count) {
+ for (i = scm->fp->count - 1; i >= 0; i--)
+ unix_inflight(scm->fp->fp[i]);
+ }
+ return max_level;
}
static int unix_scm_to_skb(struct scm_cookie *scm, struct sk_buff *skb, bool send_fds)
struct sk_buff *skb;
long timeo;
struct scm_cookie tmp_scm;
+ int max_level;
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
goto out;
err = unix_scm_to_skb(siocb->scm, skb, true);
- if (err)
+ if (err < 0)
goto out_free;
+ max_level = err + 1;
unix_get_secdata(siocb->scm, skb);
skb_reset_transport_header(skb);
if (sock_flag(other, SOCK_RCVTSTAMP))
__net_timestamp(skb);
skb_queue_tail(&other->sk_receive_queue, skb);
+ if (max_level > unix_sk(other)->recursion_level)
+ unix_sk(other)->recursion_level = max_level;
unix_state_unlock(other);
other->sk_data_ready(other, len);
sock_put(other);
int sent = 0;
struct scm_cookie tmp_scm;
bool fds_sent = false;
+ int max_level;
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
/* Only send the fds in the first buffer */
err = unix_scm_to_skb(siocb->scm, skb, !fds_sent);
- if (err) {
+ if (err < 0) {
kfree_skb(skb);
goto out_err;
}
+ max_level = err + 1;
fds_sent = true;
err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
goto pipe_err_free;
skb_queue_tail(&other->sk_receive_queue, skb);
+ if (max_level > unix_sk(other)->recursion_level)
+ unix_sk(other)->recursion_level = max_level;
unix_state_unlock(other);
other->sk_data_ready(other, size);
sent += size;
unix_state_lock(sk);
skb = skb_dequeue(&sk->sk_receive_queue);
if (skb == NULL) {
+ unix_sk(sk)->recursion_level = 0;
if (copied >= target)
goto unlock;
unsigned int unix_tot_inflight;
-static struct sock *unix_get_socket(struct file *filp)
+struct sock *unix_get_socket(struct file *filp)
{
struct sock *u_sock = NULL;
struct inode *inode = filp->f_path.dentry->d_inode;
}
static bool gc_in_progress = false;
+#define UNIX_INFLIGHT_TRIGGER_GC 16000
void wait_for_unix_gc(void)
{
+ /*
+ * If number of inflight sockets is insane,
+ * force a garbage collect right now.
+ */
+ if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+ unix_gc();
wait_event(unix_gc_wait, gc_in_progress == false);
}
return chan;
}
+static bool can_beacon_sec_chan(struct wiphy *wiphy,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type)
+{
+ struct ieee80211_channel *sec_chan;
+ int diff;
+
+ switch (channel_type) {
+ case NL80211_CHAN_HT40PLUS:
+ diff = 20;
+ break;
+ case NL80211_CHAN_HT40MINUS:
+ diff = -20;
+ break;
+ default:
+ return false;
+ }
+
+ sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff);
+ if (!sec_chan)
+ return false;
+
+ /* we'll need a DFS capability later */
+ if (sec_chan->flags & (IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_PASSIVE_SCAN |
+ IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_RADAR))
+ return false;
+
+ return true;
+}
+
int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, int freq,
enum nl80211_channel_type channel_type)
if (!chan)
return -EINVAL;
+ /* Both channels should be able to initiate communication */
+ if (wdev && (wdev->iftype == NL80211_IFTYPE_ADHOC ||
+ wdev->iftype == NL80211_IFTYPE_AP ||
+ wdev->iftype == NL80211_IFTYPE_AP_VLAN ||
+ wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
+ wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+ switch (channel_type) {
+ case NL80211_CHAN_HT40PLUS:
+ case NL80211_CHAN_HT40MINUS:
+ if (!can_beacon_sec_chan(&rdev->wiphy, chan,
+ channel_type)) {
+ printk(KERN_DEBUG
+ "cfg80211: Secondary channel not "
+ "allowed to initiate communication\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
result = rdev->ops->set_channel(&rdev->wiphy,
wdev ? wdev->netdev : NULL,
chan, channel_type);
list_for_each_safe(entry, tmp, &x25_neigh_list) {
nb = list_entry(entry, struct x25_neigh, node);
__x25_remove_neigh(nb);
+ dev_put(nb->dev);
}
write_unlock_bh(&x25_neigh_list_lock);
}
if (sz <= PAGE_SIZE)
n = kzalloc(sz, GFP_KERNEL);
else if (hashdist)
- n = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+ n = vzalloc(sz);
else
n = (struct hlist_head *)
__get_free_pages(GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO,
return xc;
error:
- kfree(xc);
+ xfrm_state_put(xc);
return NULL;
}
EXPORT_SYMBOL(xfrm_state_migrate);
# Extract GFP flags from the kernel source
TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1
-grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+grep -q ___GFP $SOURCE/include/linux/gfp.h
+if [ $? -eq 0 ]; then
+ grep "^#define ___GFP" $SOURCE/include/linux/gfp.h | sed -e 's/u$//' | grep -v GFP_BITS > $TMPFILE
+else
+ grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+fi
# Parse the flags
IFS="
struct menu *list;
struct symbol *sym;
struct property *prompt;
+ struct expr *visibility;
struct expr *dep;
unsigned int flags;
char *help;
void menu_add_entry(struct symbol *sym);
void menu_end_entry(void);
void menu_add_dep(struct expr *dep);
+void menu_add_visibility(struct expr *dep);
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
}
if (current_entry->prompt && current_entry != &rootmenu)
prop_warn(prop, "prompt redefined");
+
+ /* Apply all upper menus' visibilities to actual prompts. */
+ if(type == P_PROMPT) {
+ struct menu *menu = current_entry;
+
+ while ((menu = menu->parent) != NULL) {
+ if (!menu->visibility)
+ continue;
+ prop->visible.expr
+ = expr_alloc_and(prop->visible.expr,
+ menu->visibility);
+ }
+ }
+
current_entry->prompt = prop;
}
prop->text = prompt;
return menu_add_prop(type, prompt, NULL, dep);
}
+void menu_add_visibility(struct expr *expr)
+{
+ current_entry->visibility = expr_alloc_and(current_entry->visibility,
+ expr);
+}
+
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
{
menu_add_prop(type, NULL, expr, dep);
if (!menu->prompt)
return false;
+ if (menu->visibility) {
+ if (expr_calc_value(menu->visibility) == no)
+ return no;
+ }
+
sym = menu->sym;
if (sym) {
sym_calc_value(sym);
string, T_TYPE, TF_COMMAND, S_STRING
select, T_SELECT, TF_COMMAND
range, T_RANGE, TF_COMMAND
+visible, T_VISIBLE, TF_COMMAND
option, T_OPTION, TF_COMMAND
on, T_ON, TF_PARAM
modules, T_OPT_MODULES, TF_OPTION
struct kconf_id;
static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
-/* maximum key range = 47, duplicates = 0 */
+/* maximum key range = 50, duplicates = 0 */
#ifdef __GNUC__
__inline
{
static unsigned char asso_values[] =
{
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 11, 5,
- 0, 0, 5, 49, 5, 20, 49, 49, 5, 20,
- 5, 0, 30, 49, 0, 15, 0, 10, 0, 49,
- 25, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 40, 5,
+ 0, 0, 5, 52, 0, 20, 52, 52, 10, 20,
+ 5, 0, 35, 52, 0, 30, 0, 15, 0, 52,
+ 15, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52
};
register int hval = len;
char kconf_id_strings_str12[sizeof("default")];
char kconf_id_strings_str13[sizeof("def_bool")];
char kconf_id_strings_str14[sizeof("help")];
- char kconf_id_strings_str15[sizeof("bool")];
char kconf_id_strings_str16[sizeof("config")];
char kconf_id_strings_str17[sizeof("def_tristate")];
- char kconf_id_strings_str18[sizeof("boolean")];
+ char kconf_id_strings_str18[sizeof("hex")];
char kconf_id_strings_str19[sizeof("defconfig_list")];
- char kconf_id_strings_str21[sizeof("string")];
char kconf_id_strings_str22[sizeof("if")];
char kconf_id_strings_str23[sizeof("int")];
- char kconf_id_strings_str26[sizeof("select")];
char kconf_id_strings_str27[sizeof("modules")];
char kconf_id_strings_str28[sizeof("tristate")];
char kconf_id_strings_str29[sizeof("menu")];
- char kconf_id_strings_str31[sizeof("source")];
char kconf_id_strings_str32[sizeof("comment")];
- char kconf_id_strings_str33[sizeof("hex")];
char kconf_id_strings_str35[sizeof("menuconfig")];
- char kconf_id_strings_str36[sizeof("prompt")];
- char kconf_id_strings_str37[sizeof("depends")];
+ char kconf_id_strings_str36[sizeof("string")];
+ char kconf_id_strings_str37[sizeof("visible")];
+ char kconf_id_strings_str41[sizeof("prompt")];
+ char kconf_id_strings_str42[sizeof("depends")];
+ char kconf_id_strings_str44[sizeof("bool")];
+ char kconf_id_strings_str46[sizeof("select")];
+ char kconf_id_strings_str47[sizeof("boolean")];
char kconf_id_strings_str48[sizeof("mainmenu")];
+ char kconf_id_strings_str51[sizeof("source")];
};
static struct kconf_id_strings_t kconf_id_strings_contents =
{
"default",
"def_bool",
"help",
- "bool",
"config",
"def_tristate",
- "boolean",
+ "hex",
"defconfig_list",
- "string",
"if",
"int",
- "select",
"modules",
"tristate",
"menu",
- "source",
"comment",
- "hex",
"menuconfig",
+ "string",
+ "visible",
"prompt",
"depends",
- "mainmenu"
+ "bool",
+ "select",
+ "boolean",
+ "mainmenu",
+ "source"
};
#define kconf_id_strings ((const char *) &kconf_id_strings_contents)
#ifdef __GNUC__
{
enum
{
- TOTAL_KEYWORDS = 31,
+ TOTAL_KEYWORDS = 32,
MIN_WORD_LENGTH = 2,
MAX_WORD_LENGTH = 14,
MIN_HASH_VALUE = 2,
- MAX_HASH_VALUE = 48
+ MAX_HASH_VALUE = 51
};
static struct kconf_id wordlist[] =
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_UNKNOWN},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_HELP, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16, T_CONFIG, TF_COMMAND},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_DEFAULT, TF_COMMAND, S_TRISTATE},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_HEX},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19, T_OPT_DEFCONFIG_LIST,TF_OPTION},
- {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT},
- {-1}, {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND},
+ {-1}, {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND},
- {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SOURCE, TF_COMMAND},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_TYPE, TF_COMMAND, S_HEX},
- {-1},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_MENUCONFIG, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_PROMPT, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_DEPENDS, TF_COMMAND},
- {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_TYPE, TF_COMMAND, S_STRING},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_VISIBLE, TF_COMMAND},
+ {-1}, {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_PROMPT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_DEPENDS, TF_COMMAND},
{-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND}
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str44, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_SELECT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND},
+ {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_SOURCE, TF_COMMAND}
};
if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
T_DEFAULT = 275,
T_SELECT = 276,
T_RANGE = 277,
- T_OPTION = 278,
- T_ON = 279,
- T_WORD = 280,
- T_WORD_QUOTE = 281,
- T_UNEQUAL = 282,
- T_CLOSE_PAREN = 283,
- T_OPEN_PAREN = 284,
- T_EOL = 285,
- T_OR = 286,
- T_AND = 287,
- T_EQUAL = 288,
- T_NOT = 289
+ T_VISIBLE = 278,
+ T_OPTION = 279,
+ T_ON = 280,
+ T_WORD = 281,
+ T_WORD_QUOTE = 282,
+ T_UNEQUAL = 283,
+ T_CLOSE_PAREN = 284,
+ T_OPEN_PAREN = 285,
+ T_EOL = 286,
+ T_OR = 287,
+ T_AND = 288,
+ T_EQUAL = 289,
+ T_NOT = 290
};
#endif
/* YYFINAL -- State number of the termination state. */
#define YYFINAL 11
/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 277
+#define YYLAST 290
/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 35
+#define YYNTOKENS 36
/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 48
+#define YYNNTS 50
/* YYNRULES -- Number of rules. */
-#define YYNRULES 113
+#define YYNRULES 118
/* YYNRULES -- Number of states. */
-#define YYNSTATES 185
+#define YYNSTATES 191
/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
#define YYUNDEFTOK 2
-#define YYMAXUTOK 289
+#define YYMAXUTOK 290
#define YYTRANSLATE(YYX) \
((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
+ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
+ 35
};
#if YYDEBUG
{
0, 0, 3, 6, 8, 11, 13, 14, 17, 20,
23, 26, 31, 36, 40, 42, 44, 46, 48, 50,
- 52, 54, 56, 58, 60, 62, 64, 66, 70, 73,
- 77, 80, 84, 87, 88, 91, 94, 97, 100, 103,
- 106, 110, 115, 120, 125, 131, 135, 136, 140, 141,
- 144, 148, 151, 153, 157, 158, 161, 164, 167, 170,
- 173, 178, 182, 185, 190, 191, 194, 198, 200, 204,
- 205, 208, 211, 214, 218, 222, 225, 227, 231, 232,
- 235, 238, 241, 245, 249, 252, 255, 258, 259, 262,
- 265, 268, 273, 274, 277, 279, 281, 284, 287, 290,
- 292, 295, 296, 299, 301, 305, 309, 313, 316, 320,
- 324, 326, 328, 329
+ 52, 54, 56, 58, 60, 62, 64, 66, 68, 72,
+ 75, 79, 82, 86, 89, 90, 93, 96, 99, 102,
+ 105, 108, 112, 117, 122, 127, 133, 137, 138, 142,
+ 143, 146, 150, 153, 155, 159, 160, 163, 166, 169,
+ 172, 175, 180, 184, 187, 192, 193, 196, 200, 202,
+ 206, 207, 210, 213, 216, 220, 224, 228, 230, 234,
+ 235, 238, 241, 244, 248, 252, 255, 258, 261, 262,
+ 265, 268, 271, 276, 277, 280, 283, 286, 287, 290,
+ 292, 294, 297, 300, 303, 305, 308, 309, 312, 314,
+ 318, 322, 326, 329, 333, 337, 339, 341, 342
};
/* YYRHS -- A `-1'-separated list of the rules' RHS. */
static const yytype_int8 yyrhs[] =
{
- 36, 0, -1, 78, 37, -1, 37, -1, 62, 38,
- -1, 38, -1, -1, 38, 40, -1, 38, 54, -1,
- 38, 66, -1, 38, 77, -1, 38, 25, 1, 30,
- -1, 38, 39, 1, 30, -1, 38, 1, 30, -1,
+ 37, 0, -1, 81, 38, -1, 38, -1, 63, 39,
+ -1, 39, -1, -1, 39, 41, -1, 39, 55, -1,
+ 39, 67, -1, 39, 80, -1, 39, 26, 1, 31,
+ -1, 39, 40, 1, 31, -1, 39, 1, 31, -1,
16, -1, 18, -1, 19, -1, 21, -1, 17, -1,
- 22, -1, 20, -1, 30, -1, 60, -1, 70, -1,
- 43, -1, 45, -1, 68, -1, 25, 1, 30, -1,
- 1, 30, -1, 10, 25, 30, -1, 42, 46, -1,
- 11, 25, 30, -1, 44, 46, -1, -1, 46, 47,
- -1, 46, 48, -1, 46, 74, -1, 46, 72, -1,
- 46, 41, -1, 46, 30, -1, 19, 75, 30, -1,
- 18, 76, 79, 30, -1, 20, 80, 79, 30, -1,
- 21, 25, 79, 30, -1, 22, 81, 81, 79, 30,
- -1, 23, 49, 30, -1, -1, 49, 25, 50, -1,
- -1, 33, 76, -1, 7, 82, 30, -1, 51, 55,
- -1, 77, -1, 52, 57, 53, -1, -1, 55, 56,
- -1, 55, 74, -1, 55, 72, -1, 55, 30, -1,
- 55, 41, -1, 18, 76, 79, 30, -1, 19, 75,
- 30, -1, 17, 30, -1, 20, 25, 79, 30, -1,
- -1, 57, 40, -1, 14, 80, 78, -1, 77, -1,
- 58, 61, 59, -1, -1, 61, 40, -1, 61, 66,
- -1, 61, 54, -1, 3, 76, 78, -1, 4, 76,
- 30, -1, 63, 73, -1, 77, -1, 64, 67, 65,
- -1, -1, 67, 40, -1, 67, 66, -1, 67, 54,
- -1, 6, 76, 30, -1, 9, 76, 30, -1, 69,
- 73, -1, 12, 30, -1, 71, 13, -1, -1, 73,
- 74, -1, 73, 30, -1, 73, 41, -1, 16, 24,
- 80, 30, -1, -1, 76, 79, -1, 25, -1, 26,
- -1, 5, 30, -1, 8, 30, -1, 15, 30, -1,
- 30, -1, 78, 30, -1, -1, 14, 80, -1, 81,
- -1, 81, 33, 81, -1, 81, 27, 81, -1, 29,
- 80, 28, -1, 34, 80, -1, 80, 31, 80, -1,
- 80, 32, 80, -1, 25, -1, 26, -1, -1, 25,
- -1
+ 22, -1, 20, -1, 23, -1, 31, -1, 61, -1,
+ 71, -1, 44, -1, 46, -1, 69, -1, 26, 1,
+ 31, -1, 1, 31, -1, 10, 26, 31, -1, 43,
+ 47, -1, 11, 26, 31, -1, 45, 47, -1, -1,
+ 47, 48, -1, 47, 49, -1, 47, 75, -1, 47,
+ 73, -1, 47, 42, -1, 47, 31, -1, 19, 78,
+ 31, -1, 18, 79, 82, 31, -1, 20, 83, 82,
+ 31, -1, 21, 26, 82, 31, -1, 22, 84, 84,
+ 82, 31, -1, 24, 50, 31, -1, -1, 50, 26,
+ 51, -1, -1, 34, 79, -1, 7, 85, 31, -1,
+ 52, 56, -1, 80, -1, 53, 58, 54, -1, -1,
+ 56, 57, -1, 56, 75, -1, 56, 73, -1, 56,
+ 31, -1, 56, 42, -1, 18, 79, 82, 31, -1,
+ 19, 78, 31, -1, 17, 31, -1, 20, 26, 82,
+ 31, -1, -1, 58, 41, -1, 14, 83, 81, -1,
+ 80, -1, 59, 62, 60, -1, -1, 62, 41, -1,
+ 62, 67, -1, 62, 55, -1, 3, 79, 81, -1,
+ 4, 79, 31, -1, 64, 76, 74, -1, 80, -1,
+ 65, 68, 66, -1, -1, 68, 41, -1, 68, 67,
+ -1, 68, 55, -1, 6, 79, 31, -1, 9, 79,
+ 31, -1, 70, 74, -1, 12, 31, -1, 72, 13,
+ -1, -1, 74, 75, -1, 74, 31, -1, 74, 42,
+ -1, 16, 25, 83, 31, -1, -1, 76, 77, -1,
+ 76, 31, -1, 23, 82, -1, -1, 79, 82, -1,
+ 26, -1, 27, -1, 5, 31, -1, 8, 31, -1,
+ 15, 31, -1, 31, -1, 81, 31, -1, -1, 14,
+ 83, -1, 84, -1, 84, 34, 84, -1, 84, 28,
+ 84, -1, 30, 83, 29, -1, 35, 83, -1, 83,
+ 32, 83, -1, 83, 33, 83, -1, 26, -1, 27,
+ -1, -1, 26, -1
};
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 107, 107, 107, 109, 109, 111, 113, 114, 115,
- 116, 117, 118, 122, 126, 126, 126, 126, 126, 126,
- 126, 130, 131, 132, 133, 134, 135, 139, 140, 146,
- 154, 160, 168, 178, 180, 181, 182, 183, 184, 185,
- 188, 196, 202, 212, 218, 224, 227, 229, 240, 241,
- 246, 255, 260, 268, 271, 273, 274, 275, 276, 277,
- 280, 286, 297, 303, 313, 315, 320, 328, 336, 339,
- 341, 342, 343, 348, 355, 362, 367, 375, 378, 380,
- 381, 382, 385, 393, 400, 407, 413, 420, 422, 423,
- 424, 427, 435, 437, 442, 443, 446, 447, 448, 452,
- 453, 456, 457, 460, 461, 462, 463, 464, 465, 466,
- 469, 470, 473, 474
+ 0, 108, 108, 108, 110, 110, 112, 114, 115, 116,
+ 117, 118, 119, 123, 127, 127, 127, 127, 127, 127,
+ 127, 127, 131, 132, 133, 134, 135, 136, 140, 141,
+ 147, 155, 161, 169, 179, 181, 182, 183, 184, 185,
+ 186, 189, 197, 203, 213, 219, 225, 228, 230, 241,
+ 242, 247, 256, 261, 269, 272, 274, 275, 276, 277,
+ 278, 281, 287, 298, 304, 314, 316, 321, 329, 337,
+ 340, 342, 343, 344, 349, 356, 363, 368, 376, 379,
+ 381, 382, 383, 386, 394, 401, 408, 414, 421, 423,
+ 424, 425, 428, 436, 438, 439, 442, 449, 451, 456,
+ 457, 460, 461, 462, 466, 467, 470, 471, 474, 475,
+ 476, 477, 478, 479, 480, 483, 484, 487, 488
};
#endif
"T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG",
"T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS",
"T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE",
- "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
+ "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
"T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL",
"T_NOT", "$accept", "input", "start", "stmt_list", "option_name",
"common_stmt", "option_error", "config_entry_start", "config_stmt",
"if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu",
"menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt",
"comment", "comment_stmt", "help_start", "help", "depends_list",
- "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr",
- "symbol", "word_opt", 0
+ "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt",
+ "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0
};
#endif
0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
- 285, 286, 287, 288, 289
+ 285, 286, 287, 288, 289, 290
};
# endif
/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
static const yytype_uint8 yyr1[] =
{
- 0, 35, 36, 36, 37, 37, 38, 38, 38, 38,
- 38, 38, 38, 38, 39, 39, 39, 39, 39, 39,
- 39, 40, 40, 40, 40, 40, 40, 41, 41, 42,
- 43, 44, 45, 46, 46, 46, 46, 46, 46, 46,
- 47, 47, 47, 47, 47, 48, 49, 49, 50, 50,
- 51, 52, 53, 54, 55, 55, 55, 55, 55, 55,
- 56, 56, 56, 56, 57, 57, 58, 59, 60, 61,
- 61, 61, 61, 62, 63, 64, 65, 66, 67, 67,
- 67, 67, 68, 69, 70, 71, 72, 73, 73, 73,
- 73, 74, 75, 75, 76, 76, 77, 77, 77, 78,
- 78, 79, 79, 80, 80, 80, 80, 80, 80, 80,
- 81, 81, 82, 82
+ 0, 36, 37, 37, 38, 38, 39, 39, 39, 39,
+ 39, 39, 39, 39, 40, 40, 40, 40, 40, 40,
+ 40, 40, 41, 41, 41, 41, 41, 41, 42, 42,
+ 43, 44, 45, 46, 47, 47, 47, 47, 47, 47,
+ 47, 48, 48, 48, 48, 48, 49, 50, 50, 51,
+ 51, 52, 53, 54, 55, 56, 56, 56, 56, 56,
+ 56, 57, 57, 57, 57, 58, 58, 59, 60, 61,
+ 62, 62, 62, 62, 63, 64, 65, 66, 67, 68,
+ 68, 68, 68, 69, 70, 71, 72, 73, 74, 74,
+ 74, 74, 75, 76, 76, 76, 77, 78, 78, 79,
+ 79, 80, 80, 80, 81, 81, 82, 82, 83, 83,
+ 83, 83, 83, 83, 83, 84, 84, 85, 85
};
/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
{
0, 2, 2, 1, 2, 1, 0, 2, 2, 2,
2, 4, 4, 3, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 3, 2, 3,
- 2, 3, 2, 0, 2, 2, 2, 2, 2, 2,
- 3, 4, 4, 4, 5, 3, 0, 3, 0, 2,
- 3, 2, 1, 3, 0, 2, 2, 2, 2, 2,
- 4, 3, 2, 4, 0, 2, 3, 1, 3, 0,
- 2, 2, 2, 3, 3, 2, 1, 3, 0, 2,
- 2, 2, 3, 3, 2, 2, 2, 0, 2, 2,
- 2, 4, 0, 2, 1, 1, 2, 2, 2, 1,
- 2, 0, 2, 1, 3, 3, 3, 2, 3, 3,
- 1, 1, 0, 1
+ 1, 1, 1, 1, 1, 1, 1, 1, 3, 2,
+ 3, 2, 3, 2, 0, 2, 2, 2, 2, 2,
+ 2, 3, 4, 4, 4, 5, 3, 0, 3, 0,
+ 2, 3, 2, 1, 3, 0, 2, 2, 2, 2,
+ 2, 4, 3, 2, 4, 0, 2, 3, 1, 3,
+ 0, 2, 2, 2, 3, 3, 3, 1, 3, 0,
+ 2, 2, 2, 3, 3, 2, 2, 2, 0, 2,
+ 2, 2, 4, 0, 2, 2, 2, 0, 2, 1,
+ 1, 2, 2, 2, 1, 2, 0, 2, 1, 3,
+ 3, 3, 2, 3, 3, 1, 1, 0, 1
};
/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
means the default is an error. */
static const yytype_uint8 yydefact[] =
{
- 6, 0, 99, 0, 3, 0, 6, 6, 94, 95,
- 0, 1, 0, 0, 0, 0, 112, 0, 0, 0,
+ 6, 0, 104, 0, 3, 0, 6, 6, 99, 100,
+ 0, 1, 0, 0, 0, 0, 117, 0, 0, 0,
0, 0, 0, 14, 18, 15, 16, 20, 17, 19,
- 0, 21, 0, 7, 33, 24, 33, 25, 54, 64,
- 8, 69, 22, 87, 78, 9, 26, 87, 23, 10,
- 0, 100, 2, 73, 13, 0, 96, 0, 113, 0,
- 97, 0, 0, 0, 110, 111, 0, 0, 0, 103,
- 98, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 74, 82, 50, 83, 29, 31, 0, 107, 0,
- 0, 66, 0, 0, 11, 12, 0, 0, 0, 0,
- 92, 0, 0, 0, 46, 0, 39, 38, 34, 35,
- 0, 37, 36, 0, 0, 92, 0, 58, 59, 55,
- 57, 56, 65, 53, 52, 70, 72, 68, 71, 67,
- 89, 90, 88, 79, 81, 77, 80, 76, 106, 108,
- 109, 105, 104, 28, 85, 0, 101, 0, 101, 101,
- 101, 0, 0, 0, 86, 62, 101, 0, 101, 0,
- 0, 0, 40, 93, 0, 0, 101, 48, 45, 27,
- 0, 61, 0, 91, 102, 41, 42, 43, 0, 0,
- 47, 60, 63, 44, 49
+ 21, 0, 22, 0, 7, 34, 25, 34, 26, 55,
+ 65, 8, 70, 23, 93, 79, 9, 27, 88, 24,
+ 10, 0, 105, 2, 74, 13, 0, 101, 0, 118,
+ 0, 102, 0, 0, 0, 115, 116, 0, 0, 0,
+ 108, 103, 0, 0, 0, 0, 0, 0, 0, 88,
+ 0, 0, 75, 83, 51, 84, 30, 32, 0, 112,
+ 0, 0, 67, 0, 0, 11, 12, 0, 0, 0,
+ 0, 97, 0, 0, 0, 47, 0, 40, 39, 35,
+ 36, 0, 38, 37, 0, 0, 97, 0, 59, 60,
+ 56, 58, 57, 66, 54, 53, 71, 73, 69, 72,
+ 68, 106, 95, 0, 94, 80, 82, 78, 81, 77,
+ 90, 91, 89, 111, 113, 114, 110, 109, 29, 86,
+ 0, 106, 0, 106, 106, 106, 0, 0, 0, 87,
+ 63, 106, 0, 106, 0, 96, 0, 0, 41, 98,
+ 0, 0, 106, 49, 46, 28, 0, 62, 0, 107,
+ 92, 42, 43, 44, 0, 0, 48, 61, 64, 45,
+ 50
};
/* YYDEFGOTO[NTERM-NUM]. */
static const yytype_int16 yydefgoto[] =
{
- -1, 3, 4, 5, 32, 33, 107, 34, 35, 36,
- 37, 73, 108, 109, 152, 180, 38, 39, 123, 40,
- 75, 119, 76, 41, 127, 42, 77, 6, 43, 44,
- 135, 45, 79, 46, 47, 48, 110, 111, 78, 112,
- 147, 148, 49, 7, 161, 68, 69, 59
+ -1, 3, 4, 5, 33, 34, 108, 35, 36, 37,
+ 38, 74, 109, 110, 157, 186, 39, 40, 124, 41,
+ 76, 120, 77, 42, 128, 43, 78, 6, 44, 45,
+ 137, 46, 80, 47, 48, 49, 111, 112, 81, 113,
+ 79, 134, 152, 153, 50, 7, 165, 69, 70, 60
};
/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
STATE-NUM. */
-#define YYPACT_NINF -89
+#define YYPACT_NINF -90
static const yytype_int16 yypact[] =
{
- 3, 4, -89, 20, -89, 100, -89, 7, -89, -89,
- -8, -89, 17, 4, 28, 4, 37, 36, 4, 68,
- 87, -18, 69, -89, -89, -89, -89, -89, -89, -89,
- 128, -89, 138, -89, -89, -89, -89, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- 127, -89, -89, 110, -89, 126, -89, 136, -89, 137,
- -89, 147, 150, 152, -89, -89, -18, -18, 171, -14,
- -89, 153, 157, 34, 67, 180, 233, 220, 207, 220,
- 154, -89, -89, -89, -89, -89, -89, 0, -89, -18,
- -18, 110, 44, 44, -89, -89, 163, 174, 182, 4,
- 4, -18, 194, 44, -89, 219, -89, -89, -89, -89,
- 223, -89, -89, 203, 4, 4, 215, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, 213,
- -89, -89, -89, -89, -89, -18, 232, 227, 232, -5,
- 232, 44, 35, 234, -89, -89, 232, 235, 232, 224,
- -18, 236, -89, -89, 237, 238, 232, 216, -89, -89,
- 240, -89, 241, -89, 71, -89, -89, -89, 242, 4,
- -89, -89, -89, -89, -89
+ 4, 42, -90, 96, -90, 111, -90, 15, -90, -90,
+ 75, -90, 82, 42, 104, 42, 110, 107, 42, 115,
+ 125, -4, 121, -90, -90, -90, -90, -90, -90, -90,
+ -90, 162, -90, 163, -90, -90, -90, -90, -90, -90,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, 139, -90, -90, 138, -90, 142, -90, 143, -90,
+ 152, -90, 164, 167, 168, -90, -90, -4, -4, 77,
+ -18, -90, 177, 185, 33, 71, 195, 247, 236, -2,
+ 236, 171, -90, -90, -90, -90, -90, -90, 41, -90,
+ -4, -4, 138, 97, 97, -90, -90, 186, 187, 194,
+ 42, 42, -4, 196, 97, -90, 219, -90, -90, -90,
+ -90, 210, -90, -90, 204, 42, 42, 199, -90, -90,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, 222, -90, 223, -90, -90, -90, -90, -90, -90,
+ -90, -90, -90, -90, 215, -90, -90, -90, -90, -90,
+ -4, 222, 228, 222, -5, 222, 97, 35, 229, -90,
+ -90, 222, 232, 222, -4, -90, 135, 233, -90, -90,
+ 234, 235, 222, 240, -90, -90, 237, -90, 239, -13,
+ -90, -90, -90, -90, 244, 42, -90, -90, -90, -90,
+ -90
};
/* YYPGOTO[NTERM-NUM]. */
static const yytype_int16 yypgoto[] =
{
- -89, -89, 255, 267, -89, 47, -57, -89, -89, -89,
- -89, 239, -89, -89, -89, -89, -89, -89, -89, 130,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- -89, 181, -89, -89, -89, -89, -89, 199, 229, 16,
- 162, -1, 74, -7, 103, -65, -88, -89
+ -90, -90, 269, 271, -90, 23, -70, -90, -90, -90,
+ -90, 243, -90, -90, -90, -90, -90, -90, -90, -48,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, -20, -90, -90, -90, -90, -90, 206, 205, -68,
+ -90, -90, 169, -1, 27, -7, 118, -66, -89, -90
};
/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
positive, shift that token. If negative, reduce the rule which
number is the opposite. If zero, do what YYDEFACT says.
If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -85
+#define YYTABLE_NINF -86
static const yytype_int16 yytable[] =
{
- 10, 87, 88, 53, 141, 142, 1, 64, 65, 160,
- 1, 66, 55, 92, 57, 151, 67, 61, 118, 93,
- 11, 131, 2, 131, 139, 140, 89, 90, 138, 8,
- 9, 89, 90, 2, -30, 96, 149, 51, -30, -30,
- -30, -30, -30, -30, -30, -30, 97, 54, -30, -30,
- 98, -30, 99, 100, 101, 102, 103, 104, 56, 105,
- 167, 91, 58, 166, 106, 168, 60, -32, 96, 64,
- 65, -32, -32, -32, -32, -32, -32, -32, -32, 97,
- 159, -32, -32, 98, -32, 99, 100, 101, 102, 103,
- 104, 121, 105, 62, 132, 174, 132, 106, 146, 70,
- -5, 12, 89, 90, 13, 14, 15, 16, 17, 18,
- 19, 20, 63, 156, 21, 22, 23, 24, 25, 26,
- 27, 28, 29, 122, 125, 30, 133, -4, 12, 71,
- 31, 13, 14, 15, 16, 17, 18, 19, 20, 72,
- 51, 21, 22, 23, 24, 25, 26, 27, 28, 29,
- 124, 129, 30, 137, -84, 96, 81, 31, -84, -84,
- -84, -84, -84, -84, -84, -84, 82, 83, -84, -84,
- 98, -84, -84, -84, -84, -84, -84, 84, 184, 105,
- 85, 96, 86, 94, 130, -51, -51, 95, -51, -51,
- -51, -51, 97, 143, -51, -51, 98, 113, 114, 115,
- 116, 2, 89, 90, 144, 105, 145, 126, 96, 134,
- 117, -75, -75, -75, -75, -75, -75, -75, -75, 150,
- 153, -75, -75, 98, 13, 14, 15, 16, 17, 18,
- 19, 20, 105, 155, 21, 22, 154, 130, 14, 15,
- 158, 17, 18, 19, 20, 90, 160, 21, 22, 179,
- 31, 163, 164, 165, 173, 89, 90, 162, 128, 170,
- 136, 172, 52, 31, 169, 171, 175, 176, 177, 178,
- 181, 182, 183, 50, 120, 74, 80, 157
+ 10, 88, 89, 54, 146, 147, 119, 1, 122, 164,
+ 93, 141, 56, 142, 58, 156, 94, 62, 1, 90,
+ 91, 131, 65, 66, 144, 145, 67, 90, 91, 132,
+ 127, 68, 136, -31, 97, 2, 154, -31, -31, -31,
+ -31, -31, -31, -31, -31, 98, 52, -31, -31, 99,
+ -31, 100, 101, 102, 103, 104, -31, 105, 129, 106,
+ 138, 173, 92, 141, 107, 142, 174, 172, 8, 9,
+ 143, -33, 97, 90, 91, -33, -33, -33, -33, -33,
+ -33, -33, -33, 98, 166, -33, -33, 99, -33, 100,
+ 101, 102, 103, 104, -33, 105, 11, 106, 179, 151,
+ 123, 126, 107, 135, 125, 130, 2, 139, 2, 90,
+ 91, -5, 12, 55, 161, 13, 14, 15, 16, 17,
+ 18, 19, 20, 65, 66, 21, 22, 23, 24, 25,
+ 26, 27, 28, 29, 30, 57, 59, 31, 61, -4,
+ 12, 63, 32, 13, 14, 15, 16, 17, 18, 19,
+ 20, 64, 71, 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 30, 72, 73, 31, 180, 90, 91, 52,
+ 32, -85, 97, 82, 83, -85, -85, -85, -85, -85,
+ -85, -85, -85, 84, 190, -85, -85, 99, -85, -85,
+ -85, -85, -85, -85, -85, 85, 97, 106, 86, 87,
+ -52, -52, 140, -52, -52, -52, -52, 98, 95, -52,
+ -52, 99, 114, 115, 116, 117, 96, 148, 149, 150,
+ 158, 106, 155, 159, 97, 163, 118, -76, -76, -76,
+ -76, -76, -76, -76, -76, 160, 164, -76, -76, 99,
+ 13, 14, 15, 16, 17, 18, 19, 20, 91, 106,
+ 21, 22, 14, 15, 140, 17, 18, 19, 20, 168,
+ 175, 21, 22, 177, 181, 182, 183, 32, 187, 167,
+ 188, 169, 170, 171, 185, 189, 53, 51, 32, 176,
+ 75, 178, 121, 0, 133, 162, 0, 0, 0, 0,
+ 184
};
-static const yytype_uint8 yycheck[] =
+static const yytype_int16 yycheck[] =
{
- 1, 66, 67, 10, 92, 93, 3, 25, 26, 14,
- 3, 29, 13, 27, 15, 103, 34, 18, 75, 33,
- 0, 78, 30, 80, 89, 90, 31, 32, 28, 25,
- 26, 31, 32, 30, 0, 1, 101, 30, 4, 5,
- 6, 7, 8, 9, 10, 11, 12, 30, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 30, 25,
- 25, 68, 25, 151, 30, 30, 30, 0, 1, 25,
- 26, 4, 5, 6, 7, 8, 9, 10, 11, 12,
- 145, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 23, 75, 25, 25, 78, 160, 80, 30, 99, 30,
- 0, 1, 31, 32, 4, 5, 6, 7, 8, 9,
- 10, 11, 25, 114, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 76, 77, 25, 79, 0, 1, 1,
- 30, 4, 5, 6, 7, 8, 9, 10, 11, 1,
- 30, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 76, 77, 25, 79, 0, 1, 30, 30, 4, 5,
- 6, 7, 8, 9, 10, 11, 30, 30, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 30, 179, 25,
- 30, 1, 30, 30, 30, 5, 6, 30, 8, 9,
- 10, 11, 12, 30, 14, 15, 16, 17, 18, 19,
- 20, 30, 31, 32, 30, 25, 24, 77, 1, 79,
- 30, 4, 5, 6, 7, 8, 9, 10, 11, 25,
- 1, 14, 15, 16, 4, 5, 6, 7, 8, 9,
- 10, 11, 25, 30, 14, 15, 13, 30, 5, 6,
- 25, 8, 9, 10, 11, 32, 14, 14, 15, 33,
- 30, 148, 149, 150, 30, 31, 32, 30, 77, 156,
- 79, 158, 7, 30, 30, 30, 30, 30, 30, 166,
- 30, 30, 30, 6, 75, 36, 47, 115
+ 1, 67, 68, 10, 93, 94, 76, 3, 76, 14,
+ 28, 81, 13, 81, 15, 104, 34, 18, 3, 32,
+ 33, 23, 26, 27, 90, 91, 30, 32, 33, 31,
+ 78, 35, 80, 0, 1, 31, 102, 4, 5, 6,
+ 7, 8, 9, 10, 11, 12, 31, 14, 15, 16,
+ 17, 18, 19, 20, 21, 22, 23, 24, 78, 26,
+ 80, 26, 69, 133, 31, 133, 31, 156, 26, 27,
+ 29, 0, 1, 32, 33, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 150, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 24, 0, 26, 164, 100,
+ 77, 78, 31, 80, 77, 78, 31, 80, 31, 32,
+ 33, 0, 1, 31, 115, 4, 5, 6, 7, 8,
+ 9, 10, 11, 26, 27, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 31, 26, 26, 31, 0,
+ 1, 26, 31, 4, 5, 6, 7, 8, 9, 10,
+ 11, 26, 31, 14, 15, 16, 17, 18, 19, 20,
+ 21, 22, 23, 1, 1, 26, 31, 32, 33, 31,
+ 31, 0, 1, 31, 31, 4, 5, 6, 7, 8,
+ 9, 10, 11, 31, 185, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 31, 1, 26, 31, 31,
+ 5, 6, 31, 8, 9, 10, 11, 12, 31, 14,
+ 15, 16, 17, 18, 19, 20, 31, 31, 31, 25,
+ 1, 26, 26, 13, 1, 26, 31, 4, 5, 6,
+ 7, 8, 9, 10, 11, 31, 14, 14, 15, 16,
+ 4, 5, 6, 7, 8, 9, 10, 11, 33, 26,
+ 14, 15, 5, 6, 31, 8, 9, 10, 11, 31,
+ 31, 14, 15, 31, 31, 31, 31, 31, 31, 151,
+ 31, 153, 154, 155, 34, 31, 7, 6, 31, 161,
+ 37, 163, 76, -1, 79, 116, -1, -1, -1, -1,
+ 172
};
/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
symbol of state STATE-NUM. */
static const yytype_uint8 yystos[] =
{
- 0, 3, 30, 36, 37, 38, 62, 78, 25, 26,
- 76, 0, 1, 4, 5, 6, 7, 8, 9, 10,
+ 0, 3, 31, 37, 38, 39, 63, 81, 26, 27,
+ 79, 0, 1, 4, 5, 6, 7, 8, 9, 10,
11, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 25, 30, 39, 40, 42, 43, 44, 45, 51, 52,
- 54, 58, 60, 63, 64, 66, 68, 69, 70, 77,
- 38, 30, 37, 78, 30, 76, 30, 76, 25, 82,
- 30, 76, 25, 25, 25, 26, 29, 34, 80, 81,
- 30, 1, 1, 46, 46, 55, 57, 61, 73, 67,
- 73, 30, 30, 30, 30, 30, 30, 80, 80, 31,
- 32, 78, 27, 33, 30, 30, 1, 12, 16, 18,
- 19, 20, 21, 22, 23, 25, 30, 41, 47, 48,
- 71, 72, 74, 17, 18, 19, 20, 30, 41, 56,
- 72, 74, 40, 53, 77, 40, 54, 59, 66, 77,
- 30, 41, 74, 40, 54, 65, 66, 77, 28, 80,
- 80, 81, 81, 30, 30, 24, 76, 75, 76, 80,
- 25, 81, 49, 1, 13, 30, 76, 75, 25, 80,
- 14, 79, 30, 79, 79, 79, 81, 25, 30, 30,
- 79, 30, 79, 30, 80, 30, 30, 30, 79, 33,
- 50, 30, 30, 30, 76
+ 23, 26, 31, 40, 41, 43, 44, 45, 46, 52,
+ 53, 55, 59, 61, 64, 65, 67, 69, 70, 71,
+ 80, 39, 31, 38, 81, 31, 79, 31, 79, 26,
+ 85, 31, 79, 26, 26, 26, 27, 30, 35, 83,
+ 84, 31, 1, 1, 47, 47, 56, 58, 62, 76,
+ 68, 74, 31, 31, 31, 31, 31, 31, 83, 83,
+ 32, 33, 81, 28, 34, 31, 31, 1, 12, 16,
+ 18, 19, 20, 21, 22, 24, 26, 31, 42, 48,
+ 49, 72, 73, 75, 17, 18, 19, 20, 31, 42,
+ 57, 73, 75, 41, 54, 80, 41, 55, 60, 67,
+ 80, 23, 31, 74, 77, 41, 55, 66, 67, 80,
+ 31, 42, 75, 29, 83, 83, 84, 84, 31, 31,
+ 25, 79, 78, 79, 83, 26, 84, 50, 1, 13,
+ 31, 79, 78, 26, 14, 82, 83, 82, 31, 82,
+ 82, 82, 84, 26, 31, 31, 82, 31, 82, 83,
+ 31, 31, 31, 31, 82, 34, 51, 31, 31, 31,
+ 79
};
#define yyerrok (yyerrstatus = 0)
switch (yytype)
{
- case 52: /* "choice_entry" */
+ case 53: /* "choice_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
};
break;
- case 58: /* "if_entry" */
+ case 59: /* "if_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
};
break;
- case 64: /* "menu_entry" */
+ case 65: /* "menu_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
{ zconf_error("invalid statement"); ;}
break;
- case 27:
+ case 28:
{ zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;}
break;
- case 28:
+ case 29:
{ zconf_error("invalid option"); ;}
break;
- case 29:
+ case 30:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
;}
break;
- case 30:
+ case 31:
{
menu_end_entry();
;}
break;
- case 31:
+ case 32:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
;}
break;
- case 32:
+ case 33:
{
if (current_entry->prompt)
;}
break;
- case 40:
+ case 41:
{
menu_set_type((yyvsp[(1) - (3)].id)->stype);
;}
break;
- case 41:
+ case 42:
{
menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
;}
break;
- case 42:
+ case 43:
{
menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr));
;}
break;
- case 43:
+ case 44:
{
menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
;}
break;
- case 44:
+ case 45:
{
menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr));
;}
break;
- case 47:
+ case 48:
{
struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string)));
;}
break;
- case 48:
+ case 49:
{ (yyval.string) = NULL; ;}
break;
- case 49:
+ case 50:
{ (yyval.string) = (yyvsp[(2) - (2)].string); ;}
break;
- case 50:
+ case 51:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE);
;}
break;
- case 51:
+ case 52:
{
(yyval.menu) = menu_add_menu();
;}
break;
- case 52:
+ case 53:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) {
;}
break;
- case 60:
+ case 61:
{
menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
;}
break;
- case 61:
+ case 62:
{
if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) {
;}
break;
- case 62:
+ case 63:
{
current_entry->sym->flags |= SYMBOL_OPTIONAL;
;}
break;
- case 63:
+ case 64:
{
if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) {
;}
break;
- case 66:
+ case 67:
{
printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
;}
break;
- case 67:
+ case 68:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) {
;}
break;
- case 73:
+ case 74:
{
menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
;}
break;
- case 74:
+ case 75:
{
menu_add_entry(NULL);
;}
break;
- case 75:
+ case 76:
{
(yyval.menu) = menu_add_menu();
;}
break;
- case 76:
+ case 77:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) {
;}
break;
- case 82:
+ case 83:
{
printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
;}
break;
- case 83:
+ case 84:
{
menu_add_entry(NULL);
;}
break;
- case 84:
+ case 85:
{
menu_end_entry();
;}
break;
- case 85:
+ case 86:
{
printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
;}
break;
- case 86:
+ case 87:
{
current_entry->help = (yyvsp[(2) - (2)].string);
;}
break;
- case 91:
+ case 92:
{
menu_add_dep((yyvsp[(3) - (4)].expr));
;}
break;
- case 93:
+ case 96:
+
+ {
+ menu_add_visibility((yyvsp[(2) - (2)].expr));
+;}
+ break;
+
+ case 98:
{
menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr));
;}
break;
- case 96:
+ case 101:
{ (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
- case 97:
+ case 102:
{ (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
- case 98:
+ case 103:
{ (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
- case 101:
+ case 106:
{ (yyval.expr) = NULL; ;}
break;
- case 102:
+ case 107:
{ (yyval.expr) = (yyvsp[(2) - (2)].expr); ;}
break;
- case 103:
+ case 108:
{ (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;}
break;
- case 104:
+ case 109:
{ (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
break;
- case 105:
+ case 110:
{ (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
break;
- case 106:
+ case 111:
{ (yyval.expr) = (yyvsp[(2) - (3)].expr); ;}
break;
- case 107:
+ case 112:
{ (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;}
break;
- case 108:
+ case 113:
{ (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
break;
- case 109:
+ case 114:
{ (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
break;
- case 110:
+ case 115:
{ (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;}
break;
- case 111:
+ case 116:
{ (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;}
break;
- case 112:
+ case 117:
{ (yyval.string) = NULL; ;}
break;
case T_IF: return "if";
case T_ENDIF: return "endif";
case T_DEPENDS: return "depends";
+ case T_VISIBLE: return "visible";
}
return "<token>";
}
#define YYERROR_VERBOSE
#endif
%}
-%expect 28
+%expect 30
%union
{
%token <id>T_DEFAULT
%token <id>T_SELECT
%token <id>T_RANGE
+%token <id>T_VISIBLE
%token <id>T_OPTION
%token <id>T_ON
%token <string> T_WORD
;
option_name:
- T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT
+ T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE
;
common_stmt:
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
-menu_entry: menu depends_list
+menu_entry: menu visibility_list depends_list
{
$$ = menu_add_menu();
};
printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
};
+/* visibility option */
+
+visibility_list:
+ /* empty */
+ | visibility_list visible
+ | visibility_list T_EOL
+;
+
+visible: T_VISIBLE if_expr
+{
+ menu_add_visibility($2);
+};
+
/* prompt statement */
prompt_stmt_opt:
case T_IF: return "if";
case T_ENDIF: return "endif";
case T_DEPENDS: return "depends";
+ case T_VISIBLE: return "visible";
}
return "<token>";
}
## Copyright (c) 1998 Michael Zucchi, All Rights Reserved ##
## Copyright (C) 2000, 1 Tim Waugh <twaugh@redhat.com> ##
## Copyright (C) 2001 Simon Huggins ##
-## Copyright (C) 2005-2009 Randy Dunlap ##
+## Copyright (C) 2005-2010 Randy Dunlap ##
## ##
## #define enhancements by Armin Kuster <akuster@mvista.com> ##
## Copyright (c) 2000 MontaVista Software, Inc. ##
if ($output_mode eq "html" || $output_mode eq "xml") {
$contents = local_unescape($contents);
# convert data read & converted thru xml_escape() into &xyz; format:
- $contents =~ s/\\\\\\/&/g;
+ $contents =~ s/\\\\\\/\&/g;
}
# print STDERR "contents b4:$contents\n";
eval $dohighlight;
print $args{'type'} . " " . $args{'struct'} . " {\n";
foreach $parameter (@{$args{'parameterlist'}}) {
if ($parameter =~ /^#/) {
- print "$parameter\n";
+ my $prm = $parameter;
+ # convert data read & converted thru xml_escape() into &xyz; format:
+ # This allows us to have #define macros interspersed in a struct.
+ $prm =~ s/\\\\\\/\&/g;
+ print "$prm\n";
next;
}
}
}
+ $param = xml_escape($param);
+
# strip spaces from $param so that it is one continous string
# on @parameterlist;
# this fixes a problem where check_sections() cannot find
static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type)
{
- rp->r_info = ELF_R_INFO(sym, type);
+ rp->r_info = _w(ELF_R_INFO(sym, type));
}
static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO;
-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
--extra=+f --c-kinds=-px \
--regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
- --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
+ --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \
+ --regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/' \
+ --regex-c++='/^DEFINE_EVENT\(([^,)]*).*/trace_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
return 0;
}
+static int cap_syslog(int type)
+{
+ return 0;
+}
+
static int cap_quotactl(int cmds, int type, int id, struct super_block *sb)
{
return 0;
#include <linux/sched.h>
#include <linux/prctl.h>
#include <linux/securebits.h>
-#include <linux/syslog.h>
/*
* If a non-root user executes a setuid-root binary in
return error;
}
-/**
- * cap_syslog - Determine whether syslog function is permitted
- * @type: Function requested
- * @from_file: Whether this request came from an open file (i.e. /proc)
- *
- * Determine whether the current process is permitted to use a particular
- * syslog function, returning 0 if permission is granted, -ve if not.
- */
-int cap_syslog(int type, bool from_file)
-{
- if (type != SYSLOG_ACTION_OPEN && from_file)
- return 0;
- if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
- return -EPERM;
- if ((type != SYSLOG_ACTION_READ_ALL &&
- type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN))
- return -EPERM;
- return 0;
-}
-
/**
* cap_vm_enough_memory - Determine whether a new virtual mapping is permitted
* @mm: The VM space in which the new mapping is to be made
result = security_filter_rule_init(entry->lsm[lsm_rule].type,
Audit_equal, args,
&entry->lsm[lsm_rule].rule);
+ if (!entry->lsm[lsm_rule].rule)
+ return -EINVAL;
return result;
}
return ret;
link_prealloc_failed:
- up_write(&dest_keyring->sem);
mutex_unlock(&user->cons_lock);
kleave(" = %d [prelink]", ret);
return ret;
return security_ops->quota_on(dentry);
}
-int security_syslog(int type, bool from_file)
+int security_syslog(int type)
{
- return security_ops->syslog(type, from_file);
+ return security_ops->syslog(type);
}
int security_settime(struct timespec *ts, struct timezone *tz)
return dentry_has_perm(cred, NULL, dentry, FILE__QUOTAON);
}
-static int selinux_syslog(int type, bool from_file)
+static int selinux_syslog(int type)
{
int rc;
- rc = cap_syslog(type, from_file);
- if (rc)
- return rc;
-
switch (type) {
case SYSLOG_ACTION_READ_ALL: /* Read last kernel messages */
case SYSLOG_ACTION_SIZE_BUFFER: /* Return size of the log buffer */
*
* Returns 0 on success, error code otherwise.
*/
-static int smack_syslog(int type, bool from_file)
+static int smack_syslog(int typefrom_file)
{
- int rc;
+ int rc = 0;
char *sp = current_security();
- rc = cap_syslog(type, from_file);
- if (rc != 0)
- return rc;
-
if (capable(CAP_MAC_OVERRIDE))
return 0;
return PTR_ERR(pclk);
}
sample_clk = clk_get(&pdev->dev, "sample_clk");
- if (IS_ERR(pclk)) {
+ if (IS_ERR(sample_clk)) {
dev_dbg(&pdev->dev, "no sample clock\n");
- retval = PTR_ERR(pclk);
+ retval = PTR_ERR(sample_clk);
goto out_put_pclk;
}
clk_enable(pclk);
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <sound/core.h>
#include <sound/minors.h>
static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
{
struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ int i;
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
- if (substream != NULL) {
- snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
- }
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE];
- if (substream != NULL) {
+ for (i = 0; i < 2; i++) {
+ substream = pcm_oss_file->streams[i];
+ if (!substream)
+ continue;
+ runtime = substream->runtime;
snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
+ runtime->oss.prepare = 1;
+ runtime->oss.buffer_used = 0;
+ runtime->oss.prev_hw_ptr_period = 0;
+ runtime->oss.period_ptr = 0;
}
return 0;
}
entry->jiffies = jiffies;
entry->pos = pos;
entry->period_size = runtime->period_size;
- entry->buffer_size = runtime->buffer_size;;
+ entry->buffer_size = runtime->buffer_size;
entry->old_hw_ptr = runtime->status->hw_ptr;
entry->hw_ptr_base = runtime->hw_ptr_base;
log->idx = (log->idx + 1) % XRUN_LOG_CNT;
struct snd_pcm_hw_rule *new;
unsigned int new_rules = constrs->rules_all + 16;
new = kcalloc(new_rules, sizeof(*c), GFP_KERNEL);
- if (!new)
+ if (!new) {
+ va_end(args);
return -ENOMEM;
+ }
if (constrs->rules) {
memcpy(new, constrs->rules,
constrs->rules_num * sizeof(*c));
c->private = private;
k = 0;
while (1) {
- if (snd_BUG_ON(k >= ARRAY_SIZE(c->deps)))
+ if (snd_BUG_ON(k >= ARRAY_SIZE(c->deps))) {
+ va_end(args);
return -EINVAL;
+ }
c->deps[k++] = dep;
if (dep < 0)
break;
constrs->rules_num++;
va_end(args);
return 0;
-}
+}
EXPORT_SYMBOL(snd_pcm_hw_rule_add);
#include <linux/mm.h>
#include <linux/file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/time.h>
#include <linux/pm_qos_params.h>
#include <linux/uio.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/time.h>
#include <linux/device.h>
#include <linux/moduleparam.h>
if (sound_nblocks >= MAX_MEM_BLOCKS)
sound_nblocks = MAX_MEM_BLOCKS - 1;
- op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations)));
+ op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations)));
sound_nblocks++;
if (sound_nblocks >= MAX_MEM_BLOCKS)
sound_nblocks = MAX_MEM_BLOCKS - 1;
sound_unload_audiodev(num);
return -(ENOMEM);
}
- memset((char *) op, 0, sizeof(struct audio_operations));
init_waitqueue_head(&op->in_sleeper);
init_waitqueue_head(&op->out_sleeper);
init_waitqueue_head(&op->poll_sleeper);
/* FIXME: This leaks a mixer_operations struct every time its called
until you unload sound! */
- op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations)));
+ op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations)));
sound_nblocks++;
if (sound_nblocks >= MAX_MEM_BLOCKS)
sound_nblocks = MAX_MEM_BLOCKS - 1;
printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
return -ENOMEM;
}
- memset((char *) op, 0, sizeof(struct mixer_operations));
memcpy((char *) op, (char *) driver, driver_size);
strlcpy(op->name, name, sizeof(op->name));
return err;
parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT;
- midi_in_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+ midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf));
if (midi_in_buf[dev] == NULL)
{
}
midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0;
- midi_out_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+ midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf));
if (midi_out_buf[dev] == NULL)
{
return 0;
case SNDCTL_COPR_LOAD:
- buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
+ buf = vmalloc(sizeof(copr_buffer));
if (buf == NULL)
return -ENOSPC;
if (copy_from_user(buf, arg, sizeof(copr_buffer))) {
return err;
case SNDCTL_COPR_SENDMSG:
- mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+ mbuf = vmalloc(sizeof(copr_msg));
if (mbuf == NULL)
return -ENOSPC;
if (copy_from_user(mbuf, arg, sizeof(copr_msg))) {
case SNDCTL_COPR_RCVMSG:
err = 0;
- mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+ mbuf = vmalloc(sizeof(copr_msg));
if (mbuf == NULL)
return -ENOSPC;
data = (unsigned short *)mbuf->data;
{
if (sequencer_ok)
return;
- queue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * EV_SZ);
+ queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ);
if (queue == NULL)
{
printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n");
return;
}
- iqueue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
+ iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
if (iqueue == NULL)
{
printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n");
int i, n;
for (i = 0; i < num_mixer_volumes; i++) {
- if (strcmp(name, mixer_vols[i].name) == 0) {
+ if (strncmp(name, mixer_vols[i].name, 32) == 0) {
if (present)
mixer_vols[i].num = i;
return mixer_vols[i].levels;
}
n = num_mixer_volumes++;
- strcpy(mixer_vols[n].name, name);
+ strncpy(mixer_vols[n].name, name, 32);
if (present)
mixer_vols[n].num = n;
struct hpi_message hm;
struct hpi_response hr;
struct hpi_adapter *pa;
- pa = (struct hpi_adapter *)pci_get_drvdata(pci_dev);
+ pa = pci_get_drvdata(pci_dev);
hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM,
HPI_SUBSYS_DELETE_ADAPTER);
count_areas = size/2;
addr_area2 = addr+count_areas;
- count_areas--; /* max. index */
snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n",
addr, count_areas, addr_area2, count_areas);
+ count_areas--; /* max. index */
+
/* build combined I/O buffer length word */
lengths = (count_areas << 16) | (count_areas);
spin_lock_irqsave(&chip->reg_lock, flags);
.rate_max = AZF_FREQ_66200,
.channels_min = 1,
.channels_max = 2,
- .buffer_bytes_max = 65536,
- .period_bytes_min = 64,
- .period_bytes_max = 65536,
- .periods_min = 1,
- .periods_max = 1024,
+ .buffer_bytes_max = (64*1024),
+ .period_bytes_min = 1024,
+ .period_bytes_max = (32*1024),
+ /* We simply have two DMA areas (instead of a list of descriptors
+ such as other cards); I believe that this is a fixed hardware
+ attribute and there isn't much driver magic to be done to expand it.
+ Thus indicate that we have at least and at most 2 periods. */
+ .periods_min = 2,
+ .periods_max = 2,
/* FIXME: maybe that card actually has a FIFO?
* Hmm, it seems newer revisions do have one, but we still don't know
* its size... */
chip = snd_timer_chip(timer);
spin_lock_irqsave(&chip->reg_lock, flags);
/* disable timer countdown and interrupt */
- /* FIXME: should we write TIMER_IRQ_ACK here? */
- snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
+ /* Hmm, should we write TIMER_IRQ_ACK here?
+ YES indeed, otherwise a rogue timer operation - which prompts
+ ALSA(?) to call repeated stop() in vain, but NOT start() -
+ will never end (value 0x03 is kept shown in control byte).
+ Simply manually poking 0x04 _once_ immediately successfully stops
+ the hardware/ALSA interrupt activity. */
+ snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_azf3328_dbgcallleave();
return 0;
apcm->substream = substream;
apcm->interrupt = ct_atc_pcm_interrupt;
- runtime->private_data = apcm;
- runtime->private_free = ct_atc_pcm_free_substream;
if (IEC958 == substream->pcm->device) {
runtime->hw = ct_spdif_passthru_playback_hw;
atc->spdif_out_passthru(atc, 1);
}
apcm->timer = ct_timer_instance_new(atc->timer, apcm);
- if (!apcm->timer)
+ if (!apcm->timer) {
+ kfree(apcm);
return -ENOMEM;
+ }
+ runtime->private_data = apcm;
+ runtime->private_free = ct_atc_pcm_free_substream;
return 0;
}
apcm->started = 0;
apcm->substream = substream;
apcm->interrupt = ct_atc_pcm_interrupt;
- runtime->private_data = apcm;
- runtime->private_free = ct_atc_pcm_free_substream;
runtime->hw = ct_pcm_capture_hw;
runtime->hw.rate_max = atc->rsr * atc->msr;
}
apcm->timer = ct_timer_instance_new(atc->timer, apcm);
- if (!apcm->timer)
+ if (!apcm->timer) {
+ kfree(apcm);
return -ENOMEM;
+ }
+ runtime->private_data = apcm;
+ runtime->private_free = ct_atc_pcm_free_substream;
return 0;
}
}
EXPORT_SYMBOL_HDA(snd_hda_find_mixer_ctl);
+static int find_empty_mixer_ctl_idx(struct hda_codec *codec, const char *name)
+{
+ int idx;
+ for (idx = 0; idx < 16; idx++) { /* 16 ctlrs should be large enough */
+ if (!_snd_hda_find_mixer_ctl(codec, name, idx))
+ return idx;
+ }
+ return -EBUSY;
+}
+
/**
* snd_hda_ctl_add - Add a control element and assign to the codec
* @codec: HD-audio codec
{ } /* end */
};
-#define SPDIF_MAX_IDX 4 /* 4 instances should be enough to probe */
-
/**
* snd_hda_create_spdif_out_ctls - create Output SPDIF-related controls
* @codec: the HDA codec
struct snd_kcontrol_new *dig_mix;
int idx;
- for (idx = 0; idx < SPDIF_MAX_IDX; idx++) {
- if (!_snd_hda_find_mixer_ctl(codec, "IEC958 Playback Switch",
- idx))
- break;
- }
- if (idx >= SPDIF_MAX_IDX) {
+ idx = find_empty_mixer_ctl_idx(codec, "IEC958 Playback Switch");
+ if (idx < 0) {
printk(KERN_ERR "hda_codec: too many IEC958 outputs\n");
return -EBUSY;
}
struct snd_kcontrol_new *dig_mix;
int idx;
- for (idx = 0; idx < SPDIF_MAX_IDX; idx++) {
- if (!_snd_hda_find_mixer_ctl(codec, "IEC958 Capture Switch",
- idx))
- break;
- }
- if (idx >= SPDIF_MAX_IDX) {
+ idx = find_empty_mixer_ctl_idx(codec, "IEC958 Capture Switch");
+ if (idx < 0) {
printk(KERN_ERR "hda_codec: too many IEC958 inputs\n");
return -EBUSY;
}
for (; knew->name; knew++) {
struct snd_kcontrol *kctl;
+ int addr = 0, idx = 0;
if (knew->iface == -1) /* skip this codec private value */
continue;
- kctl = snd_ctl_new1(knew, codec);
- if (!kctl)
- return -ENOMEM;
- err = snd_hda_ctl_add(codec, 0, kctl);
- if (err < 0) {
- if (!codec->addr)
- return err;
+ for (;;) {
kctl = snd_ctl_new1(knew, codec);
if (!kctl)
return -ENOMEM;
- kctl->id.device = codec->addr;
+ if (addr > 0)
+ kctl->id.device = addr;
+ if (idx > 0)
+ kctl->id.index = idx;
err = snd_hda_ctl_add(codec, 0, kctl);
- if (err < 0)
+ if (!err)
+ break;
+ /* try first with another device index corresponding to
+ * the codec addr; if it still fails (or it's the
+ * primary codec), then try another control index
+ */
+ if (!addr && codec->addr)
+ addr = codec->addr;
+ else if (!idx && !knew->index) {
+ idx = find_empty_mixer_ctl_idx(codec,
+ knew->name);
+ if (idx <= 0)
+ return err;
+ } else
return err;
}
}
a->channels = GRAB_BITS(buf, 0, 0, 3);
a->channels++;
+ a->sample_bits = 0;
+ a->max_bitrate = 0;
+
a->format = GRAB_BITS(buf, 0, 3, 4);
switch (a->format) {
case AUDIO_CODING_TYPE_REF_STREAM_HEADER:
case AUDIO_CODING_TYPE_LPCM:
val = GRAB_BITS(buf, 2, 0, 3);
- a->sample_bits = 0;
for (i = 0; i < 3; i++)
if (val & (1 << i))
a->sample_bits |= cea_sample_sizes[i + 1];
{
int i;
- pcm->rates = 0;
- pcm->formats = 0;
- pcm->maxbps = 0;
- pcm->channels_min = -1;
- pcm->channels_max = 0;
+ /* assume basic audio support (the basic audio flag is not in ELD;
+ * however, all audio capable sinks are required to support basic
+ * audio) */
+ pcm->rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
+ pcm->formats = SNDRV_PCM_FMTBIT_S16_LE;
+ pcm->maxbps = 16;
+ pcm->channels_max = 2;
for (i = 0; i < eld->sad_count; i++) {
struct cea_sad *a = &eld->sad[i];
pcm->rates |= a->rates;
- if (a->channels < pcm->channels_min)
- pcm->channels_min = a->channels;
if (a->channels > pcm->channels_max)
pcm->channels_max = a->channels;
if (a->format == AUDIO_CODING_TYPE_LPCM) {
- if (a->sample_bits & AC_SUPPCM_BITS_16) {
- pcm->formats |= SNDRV_PCM_FMTBIT_S16_LE;
- if (pcm->maxbps < 16)
- pcm->maxbps = 16;
- }
if (a->sample_bits & AC_SUPPCM_BITS_20) {
pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
if (pcm->maxbps < 20)
/* restrict the parameters by the values the codec provides */
pcm->rates &= codec_pars->rates;
pcm->formats &= codec_pars->formats;
- pcm->channels_min = max(pcm->channels_min, codec_pars->channels_min);
pcm->channels_max = min(pcm->channels_max, codec_pars->channels_max);
pcm->maxbps = min(pcm->maxbps, codec_pars->maxbps);
}
*/
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1025, 0x009f, "Acer Aspire 5110", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1025, 0x026f, "Acer Aspire 5538", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1028, 0x0470, "Dell Inspiron 1120", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
struct conexant_spec *spec = codec->spec;
unsigned int pinctl;
- snd_printdd("CXT5066: update speaker, hp_present=%d\n",
- spec->hp_present);
+ snd_printdd("CXT5066: update speaker, hp_present=%d, cur_eapd=%d\n",
+ spec->hp_present, spec->cur_eapd);
/* Port A (HP) */
pinctl = ((spec->hp_present & 1) && spec->cur_eapd) ? PIN_HP : 0;
pinctl);
/* Port D (HP/LO) */
- pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
- ? spec->port_d_mode : 0;
- /* Mute if Port A is connected on Thinkpad */
- if (spec->thinkpad && (spec->hp_present & 1))
- pinctl = 0;
+ if (spec->dell_automute) {
+ /* DELL AIO Port Rule: PortA> PortD> IntSpk */
+ pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
+ ? PIN_OUT : 0;
+ } else if (spec->thinkpad) {
+ if (spec->cur_eapd)
+ pinctl = spec->port_d_mode;
+ /* Mute dock line-out if Port A (laptop HP) is present */
+ if (spec->hp_present& 1)
+ pinctl = 0;
+ } else {
+ pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
+ ? spec->port_d_mode : 0;
+ }
snd_hda_codec_write(codec, 0x1c, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
-
- if (spec->dell_automute) {
- /* DELL AIO Port Rule: PortA > PortD > IntSpk */
- pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
- ? PIN_OUT : 0;
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl);
- }
}
/* turn on/off EAPD (+ mute HP) as a master switch */
static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO),
- SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
- CXT5066_DELL_LAPTOP),
+ SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
+ SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP),
SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x390a, "Lenovo S10-3t", CXT5066_IDEAPAD),
return -ENODEV;
} else {
/* fallback to the codec default */
- hinfo->channels_min = codec_pars->channels_min;
hinfo->channels_max = codec_pars->channels_max;
hinfo->rates = codec_pars->rates;
hinfo->formats = codec_pars->formats;
spec->init_amp = ALC_INIT_GPIO3;
break;
case 5:
+ default:
spec->init_amp = ALC_INIT_DEFAULT;
break;
}
{ }
};
+/*
+ *ALC888 Acer Aspire 7730G model
+ */
+
+static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
+/* Bias voltage on for external mic port */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Enable speaker output */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/* Enable headphone output */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/*Enable internal subwoofer */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
+ {0x17, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
+};
+
/*
* ALC889 Acer Aspire 8930G model
*/
spec->autocfg.speaker_pins[2] = 0x17;
}
+static void alc888_acer_aspire_7730g_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x16;
+ spec->autocfg.speaker_pins[2] = 0x17;
+}
+
static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
SND_PCI_QUIRK(0x1854, 0x0018, "LG LW20", ALC880_LG_LW),
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
+ SND_PCI_QUIRK(0x1854, 0x005f, "LG P1 Express", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0077, "LG LW25", ALC880_LG_LW),
SND_PCI_QUIRK(0x19db, 0x4188, "TCL S700", ALC880_TCL_S700),
{ }
};
-static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- { } /* end */
-};
-
static void alc888_6st_dell_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY),
- SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
.const_channel_count = 6,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .setup = alc888_acer_aspire_6530g_setup,
+ .setup = alc888_acer_aspire_7730g_setup,
.init_hook = alc_automute_amp,
},
[ALC883_MEDION] = {
{
struct alc_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
- int i, err;
+ int i, err, type;
+ int type_idx = 0;
hda_nid_t nid;
for (i = 0; i < cfg->num_inputs; i++) {
nid = cfg->inputs[i].pin;
if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) {
char label[32];
+ type = cfg->inputs[i].type;
+ if (i > 0 && type == cfg->inputs[i - 1].type)
+ type_idx++;
+ else
+ type_idx = 0;
snprintf(label, sizeof(label), "%s Boost",
hda_get_autocfg_input_label(codec, cfg, i));
- err = add_control(spec, ALC_CTL_WIDGET_VOL, label, 0,
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, label,
+ type_idx,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
if (err < 0)
return err;
/* different alc269-variants */
enum {
ALC269_TYPE_NORMAL,
+ ALC269_TYPE_ALC258,
ALC269_TYPE_ALC259,
+ ALC269_TYPE_ALC269VB,
+ ALC269_TYPE_ALC270,
ALC269_TYPE_ALC271X,
};
enum {
ALC269_FIXUP_SONY_VAIO,
+ ALC275_FIX_SONY_VAIO_GPIO2,
ALC269_FIXUP_DELL_M101Z,
+ ALC269_FIXUP_SKU_IGNORE,
+ ALC269_FIXUP_ASUS_G73JW,
};
static const struct alc_fixup alc269_fixups[] = {
{}
}
},
+ [ALC275_FIX_SONY_VAIO_GPIO2] = {
+ .verbs = (const struct hda_verb[]) {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x04},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x04},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+ { }
+ }
+ },
[ALC269_FIXUP_DELL_M101Z] = {
.verbs = (const struct hda_verb[]) {
/* Enables internal speaker */
{}
}
},
+ [ALC269_FIXUP_SKU_IGNORE] = {
+ .sku = ALC_FIXUP_SKU_IGNORE,
+ },
+ [ALC269_FIXUP_ASUS_G73JW] = {
+ .pins = (const struct alc_pincfg[]) {
+ { 0x17, 0x99130111 }, /* subwoofer */
+ { }
+ }
+ },
};
static struct snd_pci_quirk alc269_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIX_SONY_VAIO_GPIO2),
+ SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIX_SONY_VAIO_GPIO2),
+ SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIX_SONY_VAIO_GPIO2),
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
+ SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
+ SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
{}
};
static int patch_alc269(struct hda_codec *codec)
{
struct alc_spec *spec;
- int board_config;
+ int board_config, coef;
int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
alc_auto_parse_customize_define(codec);
- if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010){
- if (codec->bus->pci->subsystem_vendor == 0x1025 &&
- spec->cdefine.platform_type == 1) {
- alc_codec_rename(codec, "ALC271X");
- spec->codec_variant = ALC269_TYPE_ALC271X;
- } else {
- alc_codec_rename(codec, "ALC259");
- spec->codec_variant = ALC269_TYPE_ALC259;
- }
- } else
- alc_fix_pll_init(codec, 0x20, 0x04, 15);
-
- alc269_fill_coef(codec);
+ if (codec->vendor_id == 0x10ec0269) {
+ coef = alc_read_coef_idx(codec, 0);
+ if ((coef & 0x00f0) == 0x0010) {
+ if (codec->bus->pci->subsystem_vendor == 0x1025 &&
+ spec->cdefine.platform_type == 1) {
+ alc_codec_rename(codec, "ALC271X");
+ spec->codec_variant = ALC269_TYPE_ALC271X;
+ } else if ((coef & 0xf000) == 0x1000) {
+ spec->codec_variant = ALC269_TYPE_ALC270;
+ } else if ((coef & 0xf000) == 0x2000) {
+ alc_codec_rename(codec, "ALC259");
+ spec->codec_variant = ALC269_TYPE_ALC259;
+ } else if ((coef & 0xf000) == 0x3000) {
+ alc_codec_rename(codec, "ALC258");
+ spec->codec_variant = ALC269_TYPE_ALC258;
+ } else {
+ alc_codec_rename(codec, "ALC269VB");
+ spec->codec_variant = ALC269_TYPE_ALC269VB;
+ }
+ } else
+ alc_fix_pll_init(codec, 0x20, 0x04, 15);
+ alc269_fill_coef(codec);
+ }
board_config = snd_hda_check_board_config(codec, ALC269_MODEL_LAST,
alc269_models,
spec->stream_digital_capture = &alc269_pcm_digital_capture;
if (!spec->adc_nids) { /* wasn't filled automatically? use default */
- if (spec->codec_variant != ALC269_TYPE_NORMAL) {
+ if (spec->codec_variant == ALC269_TYPE_NORMAL) {
spec->adc_nids = alc269_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
spec->capsrc_nids = alc269_capsrc_nids;
static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+ return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x22, 0);
}
return 0x02;
else if (nid >= 0x0c && nid <= 0x0e)
return nid - 0x0c + 0x02;
+ else if (nid == 0x26) /* ALC887-VD has this DAC too */
+ return 0x25;
else
return 0;
}
static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
hda_nid_t dac)
{
- hda_nid_t mix[4];
+ hda_nid_t mix[5];
int i, num;
num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));
static struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
+ SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
{}
{
if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){
kfree(codec->chip_name);
- codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
+ if (codec->vendor_id == 0x10ec0887)
+ codec->chip_name = kstrdup("ALC887-VD", GFP_KERNEL);
+ else
+ codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
if (!codec->chip_name) {
alc_free(codec);
return -ENOMEM;
{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
.patch = patch_alc882 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
- { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
+ { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc888 },
{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
.patch = patch_alc882 },
{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 },
0x11, 0x20, 0
};
+#define STAC92HD87B_NUM_DMICS 1
+static hda_nid_t stac92hd87b_dmic_nids[STAC92HD87B_NUM_DMICS + 1] = {
+ 0x11, 0
+};
+
#define STAC92HD83XXX_NUM_CAPS 2
static unsigned long stac92hd83xxx_capvols[] = {
HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
"Alienware M17x", STAC_ALIENWARE_M17X),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
{} /* terminator */
};
label = hda_get_input_pin_label(codec, nid, 1);
snd_hda_add_imux_item(dimux, label, index, &type_idx);
+ if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1)
+ snd_hda_add_imux_item(imux, label, index, &type_idx);
err = create_elem_capture_vol(codec, nid, label, type_idx,
HDA_INPUT);
if (err < 0)
return err;
}
-
- if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) {
- snd_hda_add_imux_item(imux, label, index, NULL);
- spec->num_analog_muxes++;
- }
}
return 0;
stac92hd83xxx_brd_tbl[spec->board_config]);
switch (codec->vendor_id) {
+ case 0x111d76d1:
+ case 0x111d76d9:
+ spec->dmic_nids = stac92hd87b_dmic_nids;
+ spec->num_dmics = stac92xx_connected_ports(codec,
+ stac92hd87b_dmic_nids,
+ STAC92HD87B_NUM_DMICS);
+ /* Fall through */
case 0x111d7666:
case 0x111d7667:
case 0x111d7668:
case 0x111d7669:
- case 0x111d76d1:
- case 0x111d76d9:
spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
spec->pin_nids = stac92hd88xxx_pin_nids;
spec->mono_nid = 0;
.name = "Dell Inspiron 8600", /* STAC9750/51 */
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x1028,
+ .subdevice = 0x0182,
+ .name = "Dell Latitude D610", /* STAC9750/51 */
+ .type = AC97_TUNE_HP_ONLY
+ },
{
.subvendor = 0x1028,
.subdevice = 0x0186,
#include <sound/hwdep.h>
+#ifndef readl_be
#define readl_be(x) be32_to_cpu(__raw_readl(x))
+#endif
+
+#ifndef writel_be
#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+#endif
+#ifndef readl_le
#define readl_le(x) le32_to_cpu(__raw_readl(x))
+#endif
+
+#ifndef writel_le
#define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
+#endif
#define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x))
#define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x))
chip->rsrc[i].start + 1,
rnames[i]) == NULL) {
printk(KERN_ERR "snd: can't request rsrc "
- " %d (%s: 0x%016llx:%016llx)\n",
- i, rnames[i],
- (unsigned long long)chip->rsrc[i].start,
- (unsigned long long)chip->rsrc[i].end);
+ " %d (%s: %pR)\n",
+ i, rnames[i], &chip->rsrc[i]);
err = -ENODEV;
goto __error;
}
chip->rsrc[i].start + 1,
rnames[i]) == NULL) {
printk(KERN_ERR "snd: can't request rsrc "
- " %d (%s: 0x%016llx:%016llx)\n",
- i, rnames[i],
- (unsigned long long)chip->rsrc[i].start,
- (unsigned long long)chip->rsrc[i].end);
+ " %d (%s: %pR)\n",
+ i, rnames[i], &chip->rsrc[i]);
err = -ENODEV;
goto __error;
}
config SND_AT91_SOC_SAM9G20_WM8731
tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
- depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+ depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \
+ AT91_PROGRAMMABLE_CLOCKS
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8731
help
config SND_AT32_SOC_PLAYPAQ
tristate "SoC Audio support for PlayPaq with WM8510"
- depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+ depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8510
help
}
pllb = clk_get(NULL, "pllb");
- if (IS_ERR(mclk)) {
+ if (IS_ERR(pllb)) {
printk(KERN_ERR "ASoC: Failed to get PLLB\n");
- ret = PTR_ERR(mclk);
+ ret = PTR_ERR(pllb);
goto err_mclk;
}
ret = clk_set_parent(mclk, pllb);
if (!at91sam9g20ek_snd_device) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
ret = -ENOMEM;
+ goto err_mclk;
}
platform_set_drvdata(at91sam9g20ek_snd_device,
ret = platform_device_add(at91sam9g20ek_snd_device);
if (ret) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
- platform_device_put(at91sam9g20ek_snd_device);
+ goto err_device_add;
}
return ret;
+err_device_add:
+ platform_device_put(at91sam9g20ek_snd_device);
err_mclk:
clk_put(mclk);
mclk = NULL;
return 0;
err1:
- platform_device_del(afeb9260_snd_device);
platform_device_put(afeb9260_snd_device);
return err;
}
#include <sound/max98088.h>
#include "max98088.h"
+enum max98088_type {
+ MAX98088,
+ MAX98089,
+};
+
struct max98088_cdata {
unsigned int rate;
unsigned int fmt;
};
struct max98088_priv {
- u8 reg_cache[M98088_REG_CNT];
+ enum max98088_type devtype;
void *control_data;
struct max98088_pdata *pdata;
unsigned int sysclk;
static void max98088_sync_cache(struct snd_soc_codec *codec)
{
- struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
/* write back cached values if they're writeable and
* different from the hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(max98088->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (!max98088_access[i].writable)
continue;
- if (max98088->reg_cache[i] == max98088_reg[i])
+ if (reg_cache[i] == max98088_reg[i])
continue;
- snd_soc_write(codec, i, max98088->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
int ret = 0;
codec->cache_sync = 1;
- memcpy(codec->reg_cache, max98088_reg, sizeof(max98088_reg));
ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
if (ret != 0) {
static int max98088_remove(struct snd_soc_codec *codec)
{
+ struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+
max98088_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ kfree(max98088->eq_texts);
return 0;
}
if (max98088 == NULL)
return -ENOMEM;
+ max98088->devtype = id->driver_data;
+
i2c_set_clientdata(i2c, max98088);
max98088->control_data = i2c;
max98088->pdata = i2c->dev.platform_data;
}
static const struct i2c_device_id max98088_i2c_id[] = {
- { "max98088", 0 },
+ { "max98088", MAX98088 },
+ { "max98089", MAX98089 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max98088_i2c_id);
.reg_cache_size = sizeof(stac9766_reg),
.reg_word_size = sizeof(u16),
.reg_cache_step = 2,
+ .reg_cache_default = stac9766_reg,
};
static __devinit int stac9766_probe(struct platform_device *pdev)
int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
{
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
- u8 val, bit = gpio ? 2: 1;
+ u8 val = 0, bit = gpio ? 2 : 1;
aic3x_read(codec, reg, &val);
return (val >> bit) & 1;
int aic3x_headset_detected(struct snd_soc_codec *codec)
{
- u8 val;
+ u8 val = 0;
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
return (val >> 4) & 1;
}
int aic3x_button_pressed(struct snd_soc_codec *codec)
{
- u8 val;
+ u8 val = 0;
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
return (val >> 5) & 1;
}
if (data->power_state) {
val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
- if (val < 0)
+ if (val < 0) {
dev_err(&tpa6130a2_client->dev, "Write failed\n");
+ return val;
+ }
}
/* Either powered on or off, we save the context */
.resume = uda134x_soc_resume,
.reg_cache_size = sizeof(uda134x_reg),
.reg_word_size = sizeof(u8),
+ .reg_cache_default = uda134x_reg,
.reg_cache_step = 1,
.read = uda134x_read_reg_cache,
.write = uda134x_write,
}
/* MCLK direction */
- if (dir == WM8350_MCLK_DIR_OUT)
+ if (dir == SND_SOC_CLOCK_OUT)
wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2,
WM8350_MCLK_DIR);
else
wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME,
WM8350_OUT2_VU | WM8350_OUT2R_MUTE);
+ /* Make sure AIF tristating is disabled by default */
+ wm8350_clear_bits(wm8350, WM8350_AI_FORMATING, WM8350_AIF_TRI);
+
+ /* Make sure we've got a sane companding setup too */
+ wm8350_clear_bits(wm8350, WM8350_ADC_DAC_COMP,
+ WM8350_DAC_COMP | WM8350_LOOPBACK);
+
/* Make sure jack detect is disabled to start off with */
wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
WM8350_JDL_ENA | WM8350_JDR_ENA);
/* codec private data */
struct wm8523_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8523_REGISTER_COUNT];
struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
unsigned int sysclk;
unsigned int rate_constraint_list[WM8523_NUM_RATES];
return -EINVAL;
}
- return 0;
snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
&wm8523->rate_constraint);
enum snd_soc_bias_level level)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
/* Sync back default/cached values */
for (i = WM8523_AIF_CTRL1;
i < WM8523_MAX_REGISTER; i++)
- snd_soc_write(codec, i, wm8523->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
msleep(100);
static int wm8523_probe(struct snd_soc_codec *codec)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->hw_write = (hw_write_t)i2c_master_send;
}
/* Change some default settings - latch VU and enable ZC */
- wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
- wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
+ reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
+ reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
static const u16 wm8580_reg[] = {
0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
- 0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/
+ 0x0010, 0x0002, 0x0002, 0x00c2, /*R11*/
0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
paifa |= 0x8;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- paifa |= 0x10;
+ paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
- paifa |= 0x10;
+ paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
- paifa |= 0x10;
- paifb |= WM8580_AIF_LENGTH_24;
+ paifa |= 0x0;
+ paifb |= WM8580_AIF_LENGTH_32;
break;
default:
return -EINVAL;
snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
/* Disable bypass path by default */
- snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
+ snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
snd_soc_add_controls(codec, wm8731_snd_controls,
ARRAY_SIZE(wm8731_snd_controls));
/* codec private data */
struct wm8741_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8741_REGISTER_COUNT];
struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
unsigned int sysclk;
struct snd_pcm_hw_constraint_list *sysclk_constraints;
static int wm8741_probe(struct snd_soc_codec *codec)
{
struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret = 0;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type);
}
/* Change some default settings - latch VU */
- wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
- wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
- wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
- wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
+ reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
+ reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
+ reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
+ reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
snd_soc_add_controls(codec, wm8741_snd_controls,
ARRAY_SIZE(wm8741_snd_controls));
* are using 2 wire for device control, so we cache them instead.
*/
static const u16 wm8753_reg[] = {
- 0x0008, 0x0000, 0x000a, 0x000a,
- 0x0033, 0x0000, 0x0007, 0x00ff,
- 0x00ff, 0x000f, 0x000f, 0x007b,
- 0x0000, 0x0032, 0x0000, 0x00c3,
- 0x00c3, 0x00c0, 0x0000, 0x0000,
+ 0x0000, 0x0008, 0x0000, 0x000a,
+ 0x000a, 0x0033, 0x0000, 0x0007,
+ 0x00ff, 0x00ff, 0x000f, 0x000f,
+ 0x007b, 0x0000, 0x0032, 0x0000,
+ 0x00c3, 0x00c3, 0x00c0, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0055,
- 0x0005, 0x0050, 0x0055, 0x0050,
- 0x0055, 0x0050, 0x0055, 0x0079,
- 0x0079, 0x0079, 0x0079, 0x0079,
0x0000, 0x0000, 0x0000, 0x0000,
- 0x0097, 0x0097, 0x0000, 0x0004,
- 0x0000, 0x0083, 0x0024, 0x01ba,
- 0x0000, 0x0083, 0x0024, 0x01ba,
- 0x0000, 0x0000, 0x0000
+ 0x0055, 0x0005, 0x0050, 0x0055,
+ 0x0050, 0x0055, 0x0050, 0x0055,
+ 0x0079, 0x0079, 0x0079, 0x0079,
+ 0x0079, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0097, 0x0097, 0x0000,
+ 0x0004, 0x0000, 0x0083, 0x0024,
+ 0x01ba, 0x0000, 0x0083, 0x0024,
+ 0x01ba, 0x0000, 0x0000, 0x0000
};
/* codec private data */
enum snd_soc_control_type control_type;
unsigned int sysclk;
unsigned int pcmclk;
- u16 reg_cache[ARRAY_SIZE(wm8753_reg)];
int dai_func;
};
-/*
- * read wm8753 register cache
- */
-static inline unsigned int wm8753_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1))
- return -1;
- return cache[reg - 1];
-}
-
-/*
- * write wm8753 register cache
- */
-static inline void wm8753_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1))
- return;
- cache[reg - 1] = value;
-}
-
-/*
- * write to the WM8753 register space
- */
-static int wm8753_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8753_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8753_reset(c) wm8753_write(c, WM8753_RESET, 0)
+#define wm8753_reset(c) snd_soc_write(c, WM8753_RESET, 0)
/*
* WM8753 Controls
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+ int mode = snd_soc_read(codec, WM8753_IOCTL);
ucontrol->value.integer.value[0] = (mode & 0xc) >> 2;
return 0;
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+ int mode = snd_soc_read(codec, WM8753_IOCTL);
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
if (((mode & 0xc) >> 2) == ucontrol->value.integer.value[0])
if (pll_id == WM8753_PLL1) {
offset = 0;
enable = 0x10;
- reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xffef;
+ reg = snd_soc_read(codec, WM8753_CLOCK) & 0xffef;
} else {
offset = 4;
enable = 0x8;
- reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfff7;
+ reg = snd_soc_read(codec, WM8753_CLOCK) & 0xfff7;
}
if (!freq_in || !freq_out) {
/* disable PLL */
- wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
- wm8753_write(codec, WM8753_CLOCK, reg);
+ snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
+ snd_soc_write(codec, WM8753_CLOCK, reg);
return 0;
} else {
u16 value = 0;
/* set up N and K PLL divisor ratios */
/* bits 8:5 = PLL_N, bits 3:0 = PLL_K[21:18] */
value = (pll_div.n << 5) + ((pll_div.k & 0x3c0000) >> 18);
- wm8753_write(codec, WM8753_PLL1CTL2 + offset, value);
+ snd_soc_write(codec, WM8753_PLL1CTL2 + offset, value);
/* bits 8:0 = PLL_K[17:9] */
value = (pll_div.k & 0x03fe00) >> 9;
- wm8753_write(codec, WM8753_PLL1CTL3 + offset, value);
+ snd_soc_write(codec, WM8753_PLL1CTL3 + offset, value);
/* bits 8:0 = PLL_K[8:0] */
value = pll_div.k & 0x0001ff;
- wm8753_write(codec, WM8753_PLL1CTL4 + offset, value);
+ snd_soc_write(codec, WM8753_PLL1CTL4 + offset, value);
/* set PLL as input and enable */
- wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
+ snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
(pll_div.div2 << 3));
- wm8753_write(codec, WM8753_CLOCK, reg | enable);
+ snd_soc_write(codec, WM8753_CLOCK, reg | enable);
}
return 0;
}
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01ec;
+ u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01ec;
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_PCM, voice);
+ snd_soc_write(codec, WM8753_PCM, voice);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
- u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01f3;
- u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x017f;
+ u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01f3;
+ u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x017f;
/* bit size */
switch (params_format(params)) {
/* sample rate */
if (params_rate(params) * 384 == wm8753->pcmclk)
srate |= 0x80;
- wm8753_write(codec, WM8753_SRATE1, srate);
+ snd_soc_write(codec, WM8753_SRATE1, srate);
- wm8753_write(codec, WM8753_PCM, voice);
+ snd_soc_write(codec, WM8753_PCM, voice);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 voice, ioctl;
- voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x011f;
- ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x015d;
+ voice = snd_soc_read(codec, WM8753_PCM) & 0x011f;
+ ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x015d;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_PCM, voice);
- wm8753_write(codec, WM8753_IOCTL, ioctl);
+ snd_soc_write(codec, WM8753_PCM, voice);
+ snd_soc_write(codec, WM8753_IOCTL, ioctl);
return 0;
}
switch (div_id) {
case WM8753_PCMDIV:
- reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0x003f;
- wm8753_write(codec, WM8753_CLOCK, reg | div);
+ reg = snd_soc_read(codec, WM8753_CLOCK) & 0x003f;
+ snd_soc_write(codec, WM8753_CLOCK, reg | div);
break;
case WM8753_BCLKDIV:
- reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x01c7;
- wm8753_write(codec, WM8753_SRATE2, reg | div);
+ reg = snd_soc_read(codec, WM8753_SRATE2) & 0x01c7;
+ snd_soc_write(codec, WM8753_SRATE2, reg | div);
break;
case WM8753_VXCLKDIV:
- reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x003f;
- wm8753_write(codec, WM8753_SRATE2, reg | div);
+ reg = snd_soc_read(codec, WM8753_SRATE2) & 0x003f;
+ snd_soc_write(codec, WM8753_SRATE2, reg | div);
break;
default:
return -EINVAL;
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01e0;
+ u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01e0;
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_HIFI, hifi);
+ snd_soc_write(codec, WM8753_HIFI, hifi);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 ioctl, hifi;
- hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x011f;
- ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x00ae;
+ hifi = snd_soc_read(codec, WM8753_HIFI) & 0x011f;
+ ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x00ae;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_HIFI, hifi);
- wm8753_write(codec, WM8753_IOCTL, ioctl);
+ snd_soc_write(codec, WM8753_HIFI, hifi);
+ snd_soc_write(codec, WM8753_IOCTL, ioctl);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
- u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x01c0;
- u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01f3;
+ u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x01c0;
+ u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01f3;
int coeff;
/* is digital filter coefficient valid ? */
printk(KERN_ERR "wm8753 invalid MCLK or rate\n");
return coeff;
}
- wm8753_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
+ snd_soc_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
coeff_div[coeff].usb);
/* bit size */
break;
}
- wm8753_write(codec, WM8753_HIFI, hifi);
+ snd_soc_write(codec, WM8753_HIFI, hifi);
return 0;
}
u16 clock;
/* set clk source as pcmclk */
- clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
- wm8753_write(codec, WM8753_CLOCK, clock);
+ clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+ snd_soc_write(codec, WM8753_CLOCK, clock);
if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
return -EINVAL;
u16 clock;
/* set clk source as pcmclk */
- clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
- wm8753_write(codec, WM8753_CLOCK, clock);
+ clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+ snd_soc_write(codec, WM8753_CLOCK, clock);
if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
return -EINVAL;
u16 clock;
/* set clk source as mclk */
- clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
- wm8753_write(codec, WM8753_CLOCK, clock | 0x4);
+ clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+ snd_soc_write(codec, WM8753_CLOCK, clock | 0x4);
if (wm8753_hdac_set_dai_fmt(codec_dai, fmt) < 0)
return -EINVAL;
static int wm8753_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8753_read_reg_cache(codec, WM8753_DAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8753_DAC) & 0xfff7;
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
/* the digital mute covers the HiFi and Voice DAC's on the WM8753.
* make sure we check if they are not both active when we mute */
if (mute && wm8753->dai_func == 1) {
if (!codec->active)
- wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8);
} else {
if (mute)
- wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8);
else
- wm8753_write(codec, WM8753_DAC, mute_reg);
+ snd_soc_write(codec, WM8753_DAC, mute_reg);
}
return 0;
static int wm8753_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8753_read_reg_cache(codec, WM8753_PWR1) & 0xfe3e;
+ u16 pwr_reg = snd_soc_read(codec, WM8753_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
+ snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
break;
case SND_SOC_BIAS_PREPARE:
/* set vmid to 5k for quick power up */
- wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
+ snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
break;
case SND_SOC_BIAS_STANDBY:
/* mute dac and set vmid to 500k, enable VREF */
- wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
+ snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
break;
case SND_SOC_BIAS_OFF:
- wm8753_write(codec, WM8753_PWR1, 0x0001);
+ snd_soc_write(codec, WM8753_PWR1, 0x0001);
break;
}
codec->bias_level = level;
else
dai->driver = &wm8753_all_dai[(wm8753->dai_func << 1) + 1];
}
- wm8753_write(codec, WM8753_IOCTL, wm8753->dai_func);
+ snd_soc_write(codec, WM8753_IOCTL, wm8753->dai_func);
}
static void wm8753_work(struct work_struct *work)
static int wm8753_resume(struct snd_soc_codec *codec)
{
+ u16 *reg_cache = codec->reg_cache;
int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
/* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) {
- if (i + 1 == WM8753_RESET)
+ for (i = 1; i < ARRAY_SIZE(wm8753_reg); i++) {
+ if (i == WM8753_RESET)
continue;
/* No point in writing hardware default values back */
- if (cache[i] == wm8753_reg[i])
+ if (reg_cache[i] == wm8753_reg[i])
continue;
- data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
+ snd_soc_write(codec, i, reg_cache[i]);
}
wm8753_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
static int wm8753_probe(struct snd_soc_codec *codec)
{
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
- int ret = 0, reg;
+ int ret;
INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
msecs_to_jiffies(caps_charge));
/* set the update bits */
- reg = wm8753_read_reg_cache(codec, WM8753_LDAC);
- wm8753_write(codec, WM8753_LDAC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_RDAC);
- wm8753_write(codec, WM8753_RDAC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LADC);
- wm8753_write(codec, WM8753_LADC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_RADC);
- wm8753_write(codec, WM8753_RADC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V);
- wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V);
- wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V);
- wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V);
- wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LINVOL);
- wm8753_write(codec, WM8753_LINVOL, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_RINVOL);
- wm8753_write(codec, WM8753_RINVOL, reg | 0x0100);
+ snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_ROUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LINVOL, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RINVOL, 0x0100, 0x0100);
snd_soc_add_controls(codec, wm8753_snd_controls,
ARRAY_SIZE(wm8753_snd_controls));
/* codec private data */
struct wm8776_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8776_CACHEREGNUM];
int sysclk[2];
};
/* codec private data */
struct wm8904_priv {
- u16 reg_cache[WM8904_MAX_REGISTER + 1];
-
enum wm8904_type devtype;
void *control_data;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
- return wm8904->deemph;
+ ucontrol->value.enumerated.item[0] = wm8904->deemph;
+ return 0;
}
static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
static void wm8904_sync_cache(struct snd_soc_codec *codec)
{
- struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
/* Sync back cached values if they're different from the
* hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (!wm8904_access[i].writable)
continue;
- if (wm8904->reg_cache[i] == wm8904_reg[i])
+ if (reg_cache[i] == wm8904_reg[i])
continue;
- snd_soc_write(codec, i, wm8904->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->cache_sync = 1;
}
/* Change some default settings - latch VU and enable ZC */
- wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
- wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
- wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
- wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
+ reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
+ reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
+ reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
+ reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
+ reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
WM8904_HPOUTLZC;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
+ reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
WM8904_HPOUTRZC;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
+ reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTLZC;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
+ reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTRZC;
- wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
+ reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
/* Apply configuration from the platform data. */
if (wm8904->pdata) {
if (!pdata->gpio_cfg[i])
continue;
- wm8904->reg_cache[WM8904_GPIO_CONTROL_1 + i]
+ reg_cache[WM8904_GPIO_CONTROL_1 + i]
= pdata->gpio_cfg[i] & 0xffff;
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- wm8904->reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
+ reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
= pdata->mic_cfg[i];
}
/* Set Class W by default - this will be managed by the Class
* G widget at runtime where bypass paths are available.
*/
- wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
+ reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
/* Use normal bias source */
- wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
+ reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+ kfree(wm8904->retune_mobile_texts);
+ kfree(wm8904->drc_texts);
return 0;
}
i2c_set_clientdata(i2c, wm8940);
wm8940->control_data = i2c;
+ wm8940->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8940, &wm8940_dai, 1);
struct wm8955_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8955_MAX_REGISTER + 1];
-
unsigned int mclk_rate;
int deemph;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
- return wm8955->deemph;
+ ucontrol->value.enumerated.item[0] = wm8955->deemph;
+ return 0;
}
static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
enum snd_soc_bias_level level)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
/* Sync back cached values if they're
* different from the hardware default.
*/
- for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
if (i == WM8955_RESET)
continue;
- if (wm8955->reg_cache[i] == wm8955_reg[i])
+ if (reg_cache[i] == wm8955_reg[i])
continue;
- snd_soc_write(codec, i, wm8955->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
/* Enable VREF and VMID */
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
}
/* Change some default settings - latch VU and enable ZC */
- wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
- wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
- wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
- wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
- wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
- wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
- wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+ reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+ reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+ reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+ reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+ reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+ reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+ reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
/* Also enable adaptive bass boost by default */
- wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+ reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
- wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+ reg_cache[WM8955_ADDITIONAL_CONTROL_2]
|= WM8955_ROUT2INV;
if (pdata->monoin_diff)
- wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+ reg_cache[WM8955_MONO_OUT_MIX_1]
|= WM8955_DMEN;
}
return -ENOMEM;
i2c_set_clientdata(i2c, wm8955);
+ wm8955->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8955, &wm8955_dai, 1);
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- return wm8960->deemph;
+ ucontrol->value.enumerated.item[0] = wm8960->deemph;
+ return 0;
}
static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
return -ENOMEM;
i2c_set_clientdata(i2c, wm8960);
+ wm8960->control_type = SND_SOC_I2C;
wm8960->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
if (fs <= 24000)
reg |= WM8961_DACSLOPE;
else
- reg &= WM8961_DACSLOPE;
+ reg &= ~WM8961_DACSLOPE;
snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
return 0;
freq /= 2;
} else {
dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
- reg &= WM8961_MCLKDIV;
+ reg &= ~WM8961_MCLKDIV;
}
snd_soc_write(codec, WM8961_CLOCKING1, reg);
struct wm8962_priv {
struct snd_soc_codec *codec;
- u16 reg_cache[WM8962_MAX_REGISTER + 1];
-
int sysclk;
int sysclk_rate;
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int reg;
switch (w->shift) {
static void wm8962_sync_cache(struct snd_soc_codec *codec)
{
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
/* Sync back cached values if they're different from the
* hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (i == WM8962_SOFTWARE_RESET)
continue;
- if (wm8962->reg_cache[i] == wm8962_reg[i])
+ if (reg_cache[i] == wm8962_reg[i])
continue;
- snd_soc_write(codec, i, wm8962->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
int mask;
int active;
- mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
+ mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
active &= ~mask;
#ifdef CONFIG_PM
static int wm8962_resume(struct snd_soc_codec *codec)
{
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
/* Restore the registers */
- for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
switch (i) {
case WM8962_SOFTWARE_RESET:
continue;
{
struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
long int time;
+ int ret;
- strict_strtol(buf, 10, &time);
+ ret = strict_strtol(buf, 10, &time);
+ if (ret != 0)
+ return ret;
input_event(wm8962->beep, EV_SND, SND_TONE, time);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
dev);
+ u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
wm8962->codec = codec;
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
- wm8962->reg_cache[WM8962_CLASS_D_CONTROL_2]
+ reg_cache[WM8962_CLASS_D_CONTROL_2]
|= WM8962_SPK_MONO;
/* Micbias setup, detection enable and detection
}
/* Latch volume update bits */
- wm8962->reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
- wm8962->reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
- wm8962->reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
- wm8962->reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
- wm8962->reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
- wm8962->reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
- wm8962->reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
- wm8962->reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
- wm8962->reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
- wm8962->reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
+ reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
+ reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
+ reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
+ reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
+ reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
+ reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
+ reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
+ reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
+ reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
+ reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
wm8962_add_widgets(codec);
if (wm8971 == NULL)
return -ENOMEM;
+ wm8971->control_type = SND_SOC_I2C;
i2c_set_clientdata(i2c, wm8971);
ret = snd_soc_register_codec(&i2c->dev,
return -ENOMEM;
snd_soc_codec_set_drvdata(codec, wm8994);
+ codec->reg_cache = &wm8994->reg_cache;
+
wm8994->pdata = dev_get_platdata(codec->dev->parent);
wm8994->codec = codec;
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_DET, wm8994);
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, wm8994);
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_DET, wm8994);
+ kfree(wm8994->retune_mobile_texts);
+ kfree(wm8994->drc_texts);
kfree(wm8994);
return 0;
.resume = wm8994_resume,
.read = wm8994_read,
.write = wm8994_write,
+ .readable_register = wm8994_readable,
+ .volatile_register = wm8994_volatile,
.set_bias_level = wm8994_set_bias_level,
};
return -ENOMEM;
i2c_set_clientdata(i2c, wm9081);
+ wm9081->control_type = SND_SOC_I2C;
wm9081->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
/* This struct is used to save the context */
struct wm9090_priv {
struct mutex mutex;
- u16 reg_cache[WM9090_MAX_REGISTER + 1];
struct wm9090_platform_data pdata;
void *control_data;
};
static int wm9090_probe(struct snd_soc_codec *codec)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret;
codec->control_data = wm9090->control_data;
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
- wm9090->reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
+ reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
| WM9090_IN1A_ZC;
- wm9090->reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
+ reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
| WM9090_IN1B_ZC;
- wm9090->reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
+ reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
| WM9090_IN2A_ZC;
- wm9090->reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
+ reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
| WM9090_IN2B_ZC;
- wm9090->reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
+ reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC;
- wm9090->reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
+ reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC;
- wm9090->reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
+ reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC;
- wm9090->reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
+ reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
SOC_DOUBLE_R("Speaker ZC Switch",
WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
7, 1, 0),
-SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 3, 0, 7, 0,
spkboost_tlv),
SOC_ENUM("Speaker Reference", speaker_ref),
SOC_ENUM("Speaker Mode", speaker_mode),
}
/* davinci-evm digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link evm_dai = {
+static struct snd_soc_dai_link dm6446_evm_dai = {
.name = "TLV320AIC3X",
.stream_name = "AIC3X",
- .cpu_dai_name = "davinci-mcasp.0",
+ .cpu_dai_name = "davinci-mcbsp",
.codec_dai_name = "tlv320aic3x-hifi",
- .codec_name = "tlv320aic3x-codec.0-001a",
+ .codec_name = "tlv320aic3x-codec.1-001b",
+ .platform_name = "davinci-pcm-audio",
+ .init = evm_aic3x_init,
+ .ops = &evm_ops,
+};
+
+static struct snd_soc_dai_link dm355_evm_dai = {
+ .name = "TLV320AIC3X",
+ .stream_name = "AIC3X",
+ .cpu_dai_name = "davinci-mcbsp.1",
+ .codec_dai_name = "tlv320aic3x-hifi",
+ .codec_name = "tlv320aic3x-codec.1-001b",
.platform_name = "davinci-pcm-audio",
.init = evm_aic3x_init,
.ops = &evm_ops,
#ifdef CONFIG_SND_DM365_AIC3X_CODEC
.name = "TLV320AIC3X",
.stream_name = "AIC3X",
- .cpu_dai_name = "davinci-i2s",
+ .cpu_dai_name = "davinci-mcbsp",
.codec_dai_name = "tlv320aic3x-hifi",
.init = evm_aic3x_init,
- .codec_name = "tlv320aic3x-codec.0-001a",
+ .codec_name = "tlv320aic3x-codec.1-0018",
.ops = &evm_ops,
#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
.name = "Voice Codec - CQ93VC",
.ops = &evm_ops,
};
-/* davinci dm6446, dm355 evm audio machine driver */
-static struct snd_soc_card snd_soc_card_evm = {
- .name = "DaVinci EVM",
- .dai_link = &evm_dai,
+/* davinci dm6446 evm audio machine driver */
+static struct snd_soc_card dm6446_snd_soc_card_evm = {
+ .name = "DaVinci DM6446 EVM",
+ .dai_link = &dm6446_evm_dai,
+ .num_links = 1,
+};
+
+/* davinci dm355 evm audio machine driver */
+static struct snd_soc_card dm355_snd_soc_card_evm = {
+ .name = "DaVinci DM355 EVM",
+ .dai_link = &dm355_evm_dai,
.num_links = 1,
};
int ret;
if (machine_is_davinci_evm()) {
- evm_snd_dev_data = &snd_soc_card_evm;
+ evm_snd_dev_data = &dm6446_snd_soc_card_evm;
index = 0;
} else if (machine_is_davinci_dm355_evm()) {
- evm_snd_dev_data = &snd_soc_card_evm;
+ evm_snd_dev_data = &dm355_snd_soc_card_evm;
index = 1;
} else if (machine_is_davinci_dm365_evm()) {
evm_snd_dev_data = &dm365_snd_soc_card_evm;
snd_pcm_format_t fmt;
unsigned element_cnt = 1;
- dai->capture_dma_data = dev->dma_params;
- dai->playback_dma_data = dev->dma_params;
-
/* general line settings */
spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
return ret;
}
+static int davinci_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+ snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+ return 0;
+}
+
static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000
static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
+ .startup = davinci_i2s_startup,
.shutdown = davinci_i2s_shutdown,
.prepare = davinci_i2s_prepare,
.trigger = davinci_i2s_trigger,
.probe = davinci_i2s_probe,
.remove = davinci_i2s_remove,
.driver = {
- .name = "davinci-i2s",
+ .name = "davinci-mcbsp",
.owner = THIS_MODULE,
},
};
int word_length;
u8 fifo_level;
- cpu_dai->capture_dma_data = dev->dma_params;
- cpu_dai->playback_dma_data = dev->dma_params;
-
davinci_hw_common_param(dev, substream->stream);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
fifo_level = dev->txnumevt;
return ret;
}
+static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+ snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+ return 0;
+}
+
static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
+ .startup = davinci_mcasp_startup,
.trigger = davinci_mcasp_trigger,
.hw_params = davinci_mcasp_hw_params,
.set_fmt = davinci_mcasp_set_dai_fmt,
static struct snd_soc_dai_link sffsdr_dai = {
.name = "PCM3008", /* Codec name */
.stream_name = "PCM3008 HiFi",
- .cpu_dai_name = "davinci-asp.0",
+ .cpu_dai_name = "davinci-mcbsp",
.codec_dai_name = "pcm3008-hifi",
.codec_name = "pcm3008-codec",
.platform_name = "davinci-pcm-audio",
&davinci_vcif_dev->dma_params[substream->stream];
u32 w;
- dai->capture_dma_data = davinci_vcif_dev->dma_params;
- dai->playback_dma_data = davinci_vcif_dev->dma_params;
-
/* Restart the codec before setup */
davinci_vcif_stop(substream);
davinci_vcif_start(substream);
return ret;
}
+static int davinci_vcif_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct davinci_vcif_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+ snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+ return 0;
+}
+
#define DAVINCI_VCIF_RATES SNDRV_PCM_RATE_8000_48000
static struct snd_soc_dai_ops davinci_vcif_dai_ops = {
+ .startup = davinci_vcif_startup,
.trigger = davinci_vcif_trigger,
.hw_params = davinci_vcif_hw_params,
};
static int davinci_vcif_remove(struct platform_device *pdev)
{
+ struct davinci_vcif_dev *davinci_vcif_dev = dev_get_drvdata(&pdev->dev);
+
snd_soc_unregister_dai(&pdev->dev);
+ kfree(davinci_vcif_dev);
return 0;
}
ret = platform_device_add(simone_snd_ac97_device);
if (ret)
- goto fail;
+ goto fail1;
simone_snd_device = platform_device_alloc("soc-audio", -1);
if (!simone_snd_device) {
ret = -ENOMEM;
- goto fail;
+ goto fail2;
}
platform_set_drvdata(simone_snd_device, &snd_soc_simone);
ret = platform_device_add(simone_snd_device);
- if (ret) {
- platform_device_put(simone_snd_device);
- goto fail;
- }
+ if (ret)
+ goto fail3;
- return ret;
+ return 0;
-fail:
+fail3:
+ platform_device_put(simone_snd_device);
+fail2:
+ platform_device_del(simone_snd_ac97_device);
+fail1:
platform_device_put(simone_snd_ac97_device);
return ret;
}
rc = platform_device_add(pdev);
if (rc) {
pr_err("efika_fabric_init: platform_device_add() failed\n");
+ platform_device_put(pdev);
return -ENODEV;
}
return 0;
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <sound/soc.h>
rc = snd_soc_register_dais(&op->dev, psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
if (rc != 0) {
pr_err("Failed to register DAI\n");
- return 0;
+ return rc;
}
psc_dma = dev_get_drvdata(&op->dev);
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
rc = platform_device_add(pdev);
if (rc) {
pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+ platform_device_put(pdev);
return -ENODEV;
}
return 0;
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
static struct snd_soc_dai_link eukrea_tlv320_dai = {
.name = "tlv320aic23",
.stream_name = "TLV320AIC23",
- .codec_dai = "tlv320aic23-hifi",
+ .codec_dai_name = "tlv320aic23-hifi",
.platform_name = "imx-pcm-audio.0",
.codec_name = "tlv320aic23-codec.0-001a",
- .cpu_dai = "imx-ssi.0",
+ .cpu_dai_name = "imx-ssi.0",
.ops = &eukrea_tlv320_snd_ops,
};
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/dmaengine.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma.h>
#include "imx-ssi.h"
struct imx_pcm_runtime_data {
- int sg_count;
- struct scatterlist *sg_list;
- int period;
+ int period_bytes;
int periods;
- unsigned long dma_addr;
int dma;
- struct snd_pcm_substream *substream;
unsigned long offset;
unsigned long size;
- unsigned long period_cnt;
void *buf;
int period_time;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *dma_chan;
+ struct imx_dma_data dma_data;
};
-/* Called by the DMA framework when a period has elapsed */
-static void imx_ssi_dma_progression(int channel, void *data,
- struct scatterlist *sg)
+static void audio_dma_irq(void *data)
{
- struct snd_pcm_substream *substream = data;
+ struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- if (!sg)
- return;
-
- runtime = iprtd->substream->runtime;
+ iprtd->offset += iprtd->period_bytes;
+ iprtd->offset %= iprtd->period_bytes * iprtd->periods;
- iprtd->offset = sg->dma_address - runtime->dma_addr;
-
- snd_pcm_period_elapsed(iprtd->substream);
+ snd_pcm_period_elapsed(substream);
}
-static void imx_ssi_dma_callback(int channel, void *data)
+static bool filter(struct dma_chan *chan, void *param)
{
- pr_err("%s shouldn't be called\n", __func__);
-}
+ struct imx_pcm_runtime_data *iprtd = param;
-static void snd_imx_dma_err_callback(int channel, void *data, int err)
-{
- struct snd_pcm_substream *substream = data;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct imx_pcm_dma_params *dma_params =
- snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- int ret;
+ if (!imx_dma_is_general_purpose(chan))
+ return false;
- pr_err("DMA timeout on channel %d -%s%s%s%s\n",
- channel,
- err & IMX_DMA_ERR_BURST ? " burst" : "",
- err & IMX_DMA_ERR_REQUEST ? " request" : "",
- err & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
- err & IMX_DMA_ERR_BUFFER ? " buffer" : "");
+ chan->private = &iprtd->dma_data;
- imx_dma_disable(iprtd->dma);
- ret = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
- IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- DMA_MODE_WRITE : DMA_MODE_READ);
- if (!ret)
- imx_dma_enable(iprtd->dma);
+ return true;
}
-static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream)
+static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct imx_pcm_dma_params *dma_params;
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ struct dma_slave_config slave_config;
+ dma_cap_mask_t mask;
+ enum dma_slave_buswidth buswidth;
int ret;
dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
- if (iprtd->dma < 0) {
- pr_err("Failed to claim the audio DMA\n");
- return -ENODEV;
- }
+ iprtd->dma_data.peripheral_type = IMX_DMATYPE_SSI;
+ iprtd->dma_data.priority = DMA_PRIO_HIGH;
+ iprtd->dma_data.dma_request = dma_params->dma;
- ret = imx_dma_setup_handlers(iprtd->dma,
- imx_ssi_dma_callback,
- snd_imx_dma_err_callback, substream);
- if (ret)
- goto out;
+ /* Try to grab a DMA channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ iprtd->dma_chan = dma_request_channel(mask, filter, iprtd);
+ if (!iprtd->dma_chan)
+ return -EINVAL;
- ret = imx_dma_setup_progression_handler(iprtd->dma,
- imx_ssi_dma_progression);
- if (ret) {
- pr_err("Failed to setup the DMA handler\n");
- goto out;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ case SNDRV_PCM_FORMAT_S24_LE:
+ buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
+ default:
+ return 0;
}
- ret = imx_dma_config_channel(iprtd->dma,
- IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
- dma_params->dma, 1);
- if (ret < 0) {
- pr_err("Cannot configure DMA channel: %d\n", ret);
- goto out;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ slave_config.direction = DMA_TO_DEVICE;
+ slave_config.dst_addr = dma_params->dma_addr;
+ slave_config.dst_addr_width = buswidth;
+ slave_config.dst_maxburst = dma_params->burstsize;
+ } else {
+ slave_config.direction = DMA_FROM_DEVICE;
+ slave_config.src_addr = dma_params->dma_addr;
+ slave_config.src_addr_width = buswidth;
+ slave_config.src_maxburst = dma_params->burstsize;
}
- imx_dma_config_burstlen(iprtd->dma, dma_params->burstsize * 2);
+ ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
+ if (ret)
+ return ret;
return 0;
-out:
- imx_dma_free(iprtd->dma);
- return ret;
}
static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- int i;
unsigned long dma_addr;
+ struct dma_chan *chan;
+ struct imx_pcm_dma_params *dma_params;
+ int ret;
- imx_ssi_dma_alloc(substream);
+ dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+ ret = imx_ssi_dma_alloc(substream, params);
+ if (ret)
+ return ret;
+ chan = iprtd->dma_chan;
iprtd->size = params_buffer_bytes(params);
iprtd->periods = params_periods(params);
- iprtd->period = params_period_bytes(params);
+ iprtd->period_bytes = params_period_bytes(params);
iprtd->offset = 0;
iprtd->period_time = HZ / (params_rate(params) /
params_period_size(params));
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
- if (iprtd->sg_count != iprtd->periods) {
- kfree(iprtd->sg_list);
-
- iprtd->sg_list = kcalloc(iprtd->periods + 1,
- sizeof(struct scatterlist), GFP_KERNEL);
- if (!iprtd->sg_list)
- return -ENOMEM;
- iprtd->sg_count = iprtd->periods + 1;
- }
-
- sg_init_table(iprtd->sg_list, iprtd->sg_count);
dma_addr = runtime->dma_addr;
- for (i = 0; i < iprtd->periods; i++) {
- iprtd->sg_list[i].page_link = 0;
- iprtd->sg_list[i].offset = 0;
- iprtd->sg_list[i].dma_address = dma_addr;
- iprtd->sg_list[i].length = iprtd->period;
- dma_addr += iprtd->period;
+ iprtd->buf = (unsigned int *)substream->dma_buffer.area;
+
+ iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+ iprtd->period_bytes * iprtd->periods,
+ iprtd->period_bytes,
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ if (!iprtd->desc) {
+ dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+ return -EINVAL;
}
- /* close the loop */
- iprtd->sg_list[iprtd->sg_count - 1].offset = 0;
- iprtd->sg_list[iprtd->sg_count - 1].length = 0;
- iprtd->sg_list[iprtd->sg_count - 1].page_link =
- ((unsigned long) iprtd->sg_list | 0x01) & ~0x02;
+ iprtd->desc->callback = audio_dma_irq;
+ iprtd->desc->callback_param = substream;
+
return 0;
}
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- if (iprtd->dma >= 0) {
- imx_dma_free(iprtd->dma);
- iprtd->dma = -EINVAL;
+ if (iprtd->dma_chan) {
+ dma_release_channel(iprtd->dma_chan);
+ iprtd->dma_chan = NULL;
}
- kfree(iprtd->sg_list);
- iprtd->sg_list = NULL;
-
return 0;
}
static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct imx_pcm_dma_params *dma_params;
- struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- int err;
dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- iprtd->substream = substream;
- iprtd->buf = (unsigned int *)substream->dma_buffer.area;
- iprtd->period_cnt = 0;
-
- pr_debug("%s: buf: %p period: %d periods: %d\n",
- __func__, iprtd->buf, iprtd->period, iprtd->periods);
-
- err = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
- IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- DMA_MODE_WRITE : DMA_MODE_READ);
- if (err)
- return err;
-
return 0;
}
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- imx_dma_enable(iprtd->dma);
+ dmaengine_submit(iprtd->desc);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- imx_dma_disable(iprtd->dma);
+ dmaengine_terminate_all(iprtd->dma_chan);
break;
default:
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ pr_debug("%s: %ld %ld\n", __func__, iprtd->offset,
+ bytes_to_frames(substream->runtime, iprtd->offset));
+
return bytes_to_frames(substream->runtime, iprtd->offset);
}
.channels_max = 2,
.buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
.period_bytes_min = 128,
- .period_bytes_max = 16 * 1024,
+ .period_bytes_max = 65535, /* Limited by SDMA engine */
.periods_min = 2,
.periods_max = 255,
.fifo_size = 0,
}
snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+
+ return 0;
+}
+
+static int snd_imx_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ kfree(iprtd);
+
return 0;
}
static struct snd_pcm_ops imx_pcm_ops = {
.open = snd_imx_open,
+ .close = snd_imx_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_imx_pcm_hw_params,
.hw_free = snd_imx_pcm_hw_free,
.name = "imx-pcm-audio",
.owner = THIS_MODULE,
},
-
.probe = imx_soc_platform_probe,
.remove = __devexit_p(imx_soc_platform_remove),
};
platform_driver_unregister(&imx_pcm_driver);
}
module_exit(snd_imx_pcm_exit);
-
}
EXPORT_SYMBOL_GPL(imx_pcm_free);
+static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
+{
+ struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
+ uint32_t val;
+
+ snd_soc_dai_set_drvdata(dai, ssi);
+
+ val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
+ SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
+ writel(val, ssi->base + SSI_SFCSR);
+
+ return 0;
+}
+
static struct snd_soc_dai_driver imx_ssi_dai = {
+ .probe = imx_ssi_dai_probe,
.playback = {
.channels_min = 2,
.channels_max = 2,
.ops = &imx_ssi_pcm_dai_ops,
};
-static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
-{
- struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
- uint32_t val;
-
- snd_soc_dai_set_drvdata(dai, ssi);
-
- val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
- SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
- writel(val, ssi->base + SSI_SFCSR);
-
- return 0;
-}
-
static struct snd_soc_dai_driver imx_ac97_dai = {
.probe = imx_ssi_dai_probe,
.ac97_control = 1,
goto failed_register;
}
- ssi->soc_platform_pdev = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
- if (!ssi->soc_platform_pdev)
+ ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
+ if (!ssi->soc_platform_pdev_fiq) {
+ ret = -ENOMEM;
+ goto failed_pdev_fiq_alloc;
+ }
+
+ platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
+ ret = platform_device_add(ssi->soc_platform_pdev_fiq);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform device\n");
+ goto failed_pdev_fiq_add;
+ }
+
+ ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id);
+ if (!ssi->soc_platform_pdev) {
+ ret = -ENOMEM;
goto failed_pdev_alloc;
+ }
+
platform_set_drvdata(ssi->soc_platform_pdev, ssi);
ret = platform_device_add(ssi->soc_platform_pdev);
if (ret) {
failed_pdev_add:
platform_device_put(ssi->soc_platform_pdev);
failed_pdev_alloc:
+ platform_device_del(ssi->soc_platform_pdev_fiq);
+failed_pdev_fiq_add:
+ platform_device_put(ssi->soc_platform_pdev_fiq);
+failed_pdev_fiq_alloc:
snd_soc_unregister_dai(&pdev->dev);
failed_register:
failed_ac97:
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct imx_ssi *ssi = platform_get_drvdata(pdev);
- platform_device_del(ssi->soc_platform_pdev);
- platform_device_put(ssi->soc_platform_pdev);
+ platform_device_unregister(ssi->soc_platform_pdev);
+ platform_device_unregister(ssi->soc_platform_pdev_fiq);
snd_soc_unregister_dai(&pdev->dev);
#define DRV_NAME "imx-ssi"
+#include <linux/dmaengine.h>
+#include <mach/dma.h>
+
struct imx_pcm_dma_params {
int dma;
unsigned long dma_addr;
int enabled;
struct platform_device *soc_platform_pdev;
+ struct platform_device *soc_platform_pdev_fiq;
};
struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include "../codecs/wm9712.h"
-#include "imx-ssi.h"
-
static struct snd_soc_card imx_phycore;
static struct snd_soc_ops imx_phycore_hifi_ops = {
};
static struct snd_soc_card imx_phycore = {
- .name = "PhyCORE-audio",
+ .name = "PhyCORE-ac97-audio",
.dai_link = imx_phycore_dai_ac97,
.num_links = ARRAY_SIZE(imx_phycore_dai_ac97),
};
+static struct platform_device *imx_phycore_snd_ac97_device;
static struct platform_device *imx_phycore_snd_device;
static int __init imx_phycore_init(void)
/* return happy. We might run on a totally different machine */
return 0;
- imx_phycore_snd_device = platform_device_alloc("soc-audio", -1);
- if (!imx_phycore_snd_device)
+ imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+ if (!imx_phycore_snd_ac97_device)
return -ENOMEM;
- platform_set_drvdata(imx_phycore_snd_device, &imx_phycore);
- ret = platform_device_add(imx_phycore_snd_device);
+ platform_set_drvdata(imx_phycore_snd_ac97_device, &imx_phycore);
+ ret = platform_device_add(imx_phycore_snd_ac97_device);
+ if (ret)
+ goto fail1;
imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
- if (!imx_phycore_snd_device)
- return -ENOMEM;
+ if (!imx_phycore_snd_device) {
+ ret = -ENOMEM;
+ goto fail2;
+ }
ret = platform_device_add(imx_phycore_snd_device);
if (ret) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
- platform_device_put(imx_phycore_snd_device);
+ goto fail3;
}
+ return 0;
+
+fail3:
+ platform_device_put(imx_phycore_snd_device);
+fail2:
+ platform_device_del(imx_phycore_snd_ac97_device);
+fail1:
+ platform_device_put(imx_phycore_snd_ac97_device);
return ret;
}
static void __exit imx_phycore_exit(void)
{
platform_device_unregister(imx_phycore_snd_device);
+ platform_device_unregister(imx_phycore_snd_ac97_device);
}
late_initcall(imx_phycore_init);
mutex_lock(&ac97_mutex);
val = nuc900_checkready();
- if (!!val) {
+ if (val) {
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
goto out;
}
mutex_lock(&ac97_mutex);
tmp = nuc900_checkready();
- if (!!tmp)
+ if (tmp)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
/* clear the R_WB bit and write register index */
udelay(100);
val = nuc900_checkready();
- if (!!val)
+ if (val)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
mutex_unlock(&ac97_mutex);
return ret;
}
-static int nuc900_ac97_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_probe(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
unsigned long val;
return 0;
}
-static void nuc900_ac97_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_remove(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
clk_disable(nuc900_audio->clk);
+ return 0;
}
static struct snd_soc_dai_ops nuc900_ac97_dai_ops = {
.channels_max = 2,
},
.ops = &nuc900_ac97_dai_ops,
-}
+};
static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev)
{
static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
{
-
snd_soc_unregister_dai(&pdev->dev);
clk_put(nuc900_ac97_data->clk);
release_mem_region(nuc900_ac97_data->res->start,
resource_size(nuc900_ac97_data->res));
+ kfree(nuc900_ac97_data);
nuc900_ac97_data = NULL;
return 0;
};
+extern struct nuc900_audio *nuc900_ac97_data;
+
#endif /*end _NUC900_AUDIO_H */
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(&nuc900_audio->lock, flags);
-
ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
if (ret < 0)
return ret;
+ spin_lock_irqsave(&nuc900_audio->lock, flags);
+
nuc900_audio->substream = substream;
nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr;
nuc900_audio->buffersize[substream->stream] =
struct snd_pcm_runtime *runtime = substream->runtime;
struct nuc900_audio *nuc900_audio = runtime->private_data;
unsigned long flags, val;
+ int ret = 0;
spin_lock_irqsave(&nuc900_audio->lock, flags);
AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
spin_unlock_irqrestore(&nuc900_audio->lock, flags);
- return 0;
+ return ret;
}
static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd)
.ops = &nuc900_dma_ops,
.pcm_new = nuc900_dma_new,
.pcm_free = nuc900_dma_free_dma_buffers,
-}
+};
static int __devinit nuc900_soc_platform_probe(struct platform_device *pdev)
{
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+ depends on OMAP_MUX
select SND_OMAP_SOC_MCBSP
- select OMAP_MUX
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia N810.
case OMAP_MCBSP_CLKR_SRC_CLKR:
+ if (cpu_class_is_omap1())
+ break;
omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR);
break;
case OMAP_MCBSP_CLKR_SRC_CLKX:
+ if (cpu_class_is_omap1())
+ break;
omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX);
break;
case OMAP_MCBSP_FSR_SRC_FSR:
+ if (cpu_class_is_omap1())
+ break;
omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR);
break;
case OMAP_MCBSP_FSR_SRC_FSX:
+ if (cpu_class_is_omap1())
+ break;
omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX);
break;
default:
pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",
dev_name(&omap3pandora_snd_device->dev),
PTR_ERR(omap3pandora_dac_reg));
+ ret = PTR_ERR(omap3pandora_dac_reg);
goto fail3;
}
tlv320aic23_mclk = clk_get(dev, "mclk");
if (IS_ERR(tlv320aic23_mclk)) {
printk(KERN_ERR "Could not get mclk clock\n");
- return -ENODEV;
+ err = PTR_ERR(tlv320aic23_mclk);
+ goto err2;
}
/*
if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
err = -ECANCELED;
- goto err1;
+ goto err3;
}
}
(uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK);
return 0;
-err1:
+
+err3:
clk_put(tlv320aic23_mclk);
+err2:
platform_device_del(osk_snd_device);
+err1:
platform_device_put(osk_snd_device);
return err;
static void __exit osk_soc_exit(void)
{
+ clk_put(tlv320aic23_mclk);
platform_device_unregister(osk_snd_device);
}
config SND_PXA2XX_SOC
tristate "SoC Audio for the Intel PXA2xx chip"
depends on ARCH_PXA
+ select SND_ARM
select SND_PXA2XX_LIB
help
Say Y or M if you want to add support for codecs attached to
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
+ mutex_lock(&codec->mutex);
+
/* check the jack status at stream startup */
corgi_ext_control(codec);
+
+ mutex_unlock(&codec->mutex);
+
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
+ mutex_lock(&codec->mutex);
+
/* check the jack status at stream startup */
magician_ext_control(codec);
+ mutex_unlock(&codec->mutex);
+
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
+ mutex_lock(&codec->mutex);
+
/* check the jack status at stream startup */
poodle_ext_control(codec);
+
+ mutex_unlock(&codec->mutex);
+
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
+ mutex_lock(&codec->mutex);
+
/* check the jack status at stream startup */
spitz_ext_control(codec);
+
+ mutex_unlock(&codec->mutex);
+
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
+ mutex_lock(&codec->mutex);
+
/* check the jack status at stream startup */
tosa_ext_control(codec);
+
+ mutex_unlock(&codec->mutex);
+
return 0;
}
tristate "SoC Audio for the Samsung S3CXXXX chips"
depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
select S3C64XX_DMA if ARCH_S3C64XX
+ select S3C2410_DMA if ARCH_S3C2410
help
Say Y or M if you want to add support for codecs attached to
the S3C24XX AC97 or I2S interfaces. You will also need to
16000,
44100,
48000,
- 88200,
};
static struct snd_pcm_hw_constraint_list hw_rates = {
};
static struct platform_device *s3c24xx_snd_device;
-static struct clk *xtal;
static int rx1950_startup(struct snd_pcm_substream *substream)
{
case 44100:
case 88200:
clk_source = S3C24XX_CLKSRC_MPLL;
- fs_mode = S3C2410_IISMOD_256FS;
- div = clk_get_rate(xtal) / (256 * rate);
- if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
- div++;
+ fs_mode = S3C2410_IISMOD_384FS;
+ div = 1;
break;
default:
printk(KERN_ERR "%s: rate %d is not supported\n",
/* set MCLK division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
- S3C2410_IISMOD_384FS);
+ fs_mode);
if (ret < 0)
return ret;
goto err_plat_add;
}
- xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
-
- if (IS_ERR(xtal)) {
- ret = PTR_ERR(xtal);
- platform_device_unregister(s3c24xx_snd_device);
- goto err_clk;
- }
-
return 0;
-err_clk:
err_plat_add:
err_plat_alloc:
err_gpio_conf:
platform_device_unregister(s3c24xx_snd_device);
snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
hp_jack_gpios);
- clk_put(xtal);
gpio_free(S3C2410_GPA(1));
}
}
mout_epll = clk_get(NULL, "mout_epll");
- if (IS_ERR(fout_epll)) {
+ if (IS_ERR(mout_epll)) {
printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
__func__);
ret = -EINVAL;
}
sclk_spdif = clk_get(NULL, "sclk_spdif");
- if (IS_ERR(fout_epll)) {
+ if (IS_ERR(sclk_spdif)) {
printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
__func__);
ret = -EINVAL;
.rate_max = 1562500,
},
.ops = &s6000_i2s_dai_ops,
-}
+};
static int __devinit s6000_i2s_probe(struct platform_device *pdev)
{
}
res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
- s6000_soc_platform.name, pcm);
+ "s6000-audio", pcm);
if (res) {
printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
return res;
snd_soc_dapm_sync(codec);
- snd_ctl_add(codec->snd_card, snd_ctl_new1(&audio_out_mux, codec));
+ snd_ctl_add(codec->card->snd_card, snd_ctl_new1(&audio_out_mux, codec));
return 0;
}
struct fsi_stream playback;
struct fsi_stream capture;
+ long rate;
+
u32 mst_ctrl;
};
{
struct fsi_priv *fsi = fsi_get_priv(substream);
int is_play = fsi_is_play(substream);
+ struct fsi_master *master = fsi_get_master(fsi);
+ int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
fsi_irq_disable(fsi, is_play);
fsi_clk_ctrl(fsi, 0);
+ set_rate = master->info->set_rate;
+ if (set_rate && fsi->rate)
+ set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+ fsi->rate = 0;
+
pm_runtime_put_sync(dai->dev);
}
{
struct fsi_priv *fsi = fsi_get_priv(substream);
struct fsi_master *master = fsi_get_master(fsi);
- int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+ int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
int fsi_ver = master->core->ver;
- int is_play = fsi_is_play(substream);
+ long rate = params_rate(params);
int ret;
- /* if slave mode, set_rate is not needed */
- if (!fsi_is_master_mode(fsi, is_play))
+ set_rate = master->info->set_rate;
+ if (!set_rate)
return 0;
- /* it is error if no set_rate */
- if (!set_rate)
- return -EIO;
+ ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+ if (ret < 0) /* error */
+ return ret;
- ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+ fsi->rate = rate;
if (ret > 0) {
u32 data = 0;
static int __devexit sh4_soc_dai_remove(struct platform_device *pdev)
{
- snd_soc_unregister_dai(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
+ snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
return 0;
}
#ifdef CONFIG_SND_SOC_AC97_BUS
/* register any AC97 codecs */
for (i = 0; i < card->num_rtd; i++) {
- ret = soc_register_ac97_dai_link(&card->rtd[i]);
- if (ret < 0) {
- printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
- goto probe_dai_err;
- }
+ ret = soc_register_ac97_dai_link(&card->rtd[i]);
+ if (ret < 0) {
+ printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
+ while (--i >= 0)
+ soc_unregister_ac97_dai_link(&card->rtd[i]);
+ goto probe_dai_err;
}
+ }
#endif
card->instantiated = 1;
for (i = 0; i < count; i++) {
dai = kzalloc(sizeof(struct snd_soc_dai), GFP_KERNEL);
- if (dai == NULL)
- return -ENOMEM;
+ if (dai == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
/* create DAI component name */
dai->name = fmt_multiple_name(dev, &dai_drv[i]);
pr_debug("Registered DAI '%s'\n", dai->name);
}
+ mutex_lock(&client_mutex);
snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
return 0;
err:
return 0;
error:
- for (i--; i >= 0; i--)
- snd_soc_unregister_dai(dev);
-
if (codec->reg_cache)
kfree(codec->reg_cache);
kfree(codec->name);
struct snd_soc_dapm_widget *b,
int sort[])
{
- if (a->codec != b->codec)
- return (unsigned long)a - (unsigned long)b;
if (sort[a->id] != sort[b->id])
return sort[a->id] - sort[b->id];
if (a->reg != b->reg)
return a->reg - b->reg;
+ if (a->codec != b->codec)
+ return (unsigned long)a->codec - (unsigned long)b->codec;
return 0;
}
case SND_SOC_DAPM_STREAM_RESUME:
sys_power = 1;
break;
+ case SND_SOC_DAPM_STREAM_STOP:
+ sys_power = !!codec->active;
+ break;
case SND_SOC_DAPM_STREAM_SUSPEND:
sys_power = 0;
break;
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sound.h>
if (max_tries < 1)
max_tries = 1;
- /* ssc_div must be a power of 2. */
+ /* ssc_div must be even. */
ssc_div = (ssc_div + 1) & ~1UL;
if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
static int __cmd_buildid_list(void)
{
- int err = -1;
struct perf_session *session;
session = perf_session__new(input_name, O_RDONLY, force, false);
perf_session__fprintf_dsos_buildid(session, stdout, with_hits);
perf_session__delete(session);
- return err;
+ return 0;
}
int cmd_buildid_list(int argc, const char **argv, const char *prefix __used)
!params.show_lines))
usage_with_options(probe_usage, options);
+ /*
+ * Only consider the user's kernel image path if given.
+ */
+ symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
+
if (params.list_events) {
if (params.mod_events) {
pr_err(" Error: Don't use --list with --add/--del.\n");
if (child_pid > 0)
kill(child_pid, SIGTERM);
- if (signr == -1)
+ if (signr == -1 || signr == SIGUSR1)
return;
signal(signr, SIG_DFL);
atexit(sig_atexit);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
+ signal(SIGUSR1, sig_handler);
if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perror("failed to create pipes");
execvp(argv[0], (char **)argv);
perror(argv[0]);
+ kill(getppid(), SIGUSR1);
exit(-1);
}
if (err < 0)
err = event__synthesize_kernel_mmap(process_synthesized_event,
session, machine, "_stext");
- if (err < 0) {
- pr_err("Couldn't record kernel reference relocation symbol.\n");
- return err;
- }
+ if (err < 0)
+ pr_err("Couldn't record kernel reference relocation symbol\n"
+ "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+ "Check /proc/kallsyms permission or run as root.\n");
err = event__synthesize_modules(process_synthesized_event,
session, machine);
- if (err < 0) {
- pr_err("Couldn't record kernel reference relocation symbol.\n");
- return err;
- }
+ if (err < 0)
+ pr_err("Couldn't record kernel module information.\n"
+ "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+ "Check /proc/modules permission or run as root.\n");
+
if (perf_guest)
perf_session__process_machines(session, event__synthesize_guest_os);
}
}
- if (quiet)
+ if (quiet || signr == SIGUSR1)
return 0;
fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
const char *name, bool is_kallsyms)
{
const size_t size = PATH_MAX;
- char *filename = malloc(size),
+ char *realname = realpath(name, NULL),
+ *filename = malloc(size),
*linkname = malloc(size), *targetname;
int len, err = -1;
- if (filename == NULL || linkname == NULL)
+ if (realname == NULL || filename == NULL || linkname == NULL)
goto out_free;
len = snprintf(filename, size, "%s%s%s",
- debugdir, is_kallsyms ? "/" : "", name);
+ debugdir, is_kallsyms ? "/" : "", realname);
if (mkdir_p(filename, 0755))
goto out_free;
if (is_kallsyms) {
if (copyfile("/proc/kallsyms", filename))
goto out_free;
- } else if (link(name, filename) && copyfile(name, filename))
+ } else if (link(realname, filename) && copyfile(name, filename))
goto out_free;
}
if (symlink(targetname, linkname) == 0)
err = 0;
out_free:
+ free(realname);
free(filename);
free(linkname);
return err;
/*
* We set id to -1 if the data file doesn't contain sample
- * ids. Check for this and avoid walking through the entire
- * list of ids which may be large.
+ * ids. This can happen when the data file contains one type
+ * of event and in that case, the header can still store the
+ * event attribute information. Check for this and avoid
+ * walking through the entire list of ids which may be large.
*/
- if (id == -1ULL)
+ if (id == -1ULL) {
+ if (header->attrs > 0)
+ return &header->attr[0]->attr;
return NULL;
+ }
for (i = 0; i < header->attrs; i++) {
struct perf_header_attr *attr = header->attr[i];
static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain,
int depth, int depth_mask, int period,
- u64 total_samples, int hits,
+ u64 total_samples, u64 hits,
int left_margin)
{
int i;
const char *kernel_get_module_path(const char *module)
{
struct dso *dso;
+ struct map *map;
+ const char *vmlinux_name;
if (module) {
list_for_each_entry(dso, &machine.kernel_dsos, node) {
}
pr_debug("Failed to find module %s.\n", module);
return NULL;
+ }
+
+ map = machine.vmlinux_maps[MAP__FUNCTION];
+ dso = map->dso;
+
+ vmlinux_name = symbol_conf.vmlinux_name;
+ if (vmlinux_name) {
+ if (dso__load_vmlinux(dso, map, vmlinux_name, NULL) <= 0)
+ return NULL;
} else {
- dso = machine.vmlinux_maps[MAP__FUNCTION]->dso;
- if (dso__load_vmlinux_path(dso,
- machine.vmlinux_maps[MAP__FUNCTION], NULL) < 0) {
+ if (dso__load_vmlinux_path(dso, map, NULL) <= 0) {
pr_debug("Failed to load kernel map.\n");
return NULL;
}
}
/* Dwarf FL wrappers */
-
-static int __linux_kernel_find_elf(Dwfl_Module *mod,
- void **userdata,
- const char *module_name,
- Dwarf_Addr base,
- char **file_name, Elf **elfp)
-{
- int fd;
- const char *path = kernel_get_module_path(module_name);
-
- if (path) {
- fd = open(path, O_RDONLY);
- if (fd >= 0) {
- *file_name = strdup(path);
- return fd;
- }
- }
- /* If failed, try to call standard method */
- return dwfl_linux_kernel_find_elf(mod, userdata, module_name, base,
- file_name, elfp);
-}
-
static char *debuginfo_path; /* Currently dummy */
static const Dwfl_Callbacks offline_callbacks = {
.find_elf = dwfl_build_id_find_elf,
};
-static const Dwfl_Callbacks kernel_callbacks = {
- .find_debuginfo = dwfl_standard_find_debuginfo,
- .debuginfo_path = &debuginfo_path,
-
- .find_elf = __linux_kernel_find_elf,
- .section_address = dwfl_linux_kernel_module_section_address,
-};
-
/* Get a Dwarf from offline image */
static Dwarf *dwfl_init_offline_dwarf(int fd, Dwfl **dwflp, Dwarf_Addr *bias)
{
return dbg;
}
+#if _ELFUTILS_PREREQ(0, 148)
+/* This method is buggy if elfutils is older than 0.148 */
+static int __linux_kernel_find_elf(Dwfl_Module *mod,
+ void **userdata,
+ const char *module_name,
+ Dwarf_Addr base,
+ char **file_name, Elf **elfp)
+{
+ int fd;
+ const char *path = kernel_get_module_path(module_name);
+
+ pr_debug2("Use file %s for %s\n", path, module_name);
+ if (path) {
+ fd = open(path, O_RDONLY);
+ if (fd >= 0) {
+ *file_name = strdup(path);
+ return fd;
+ }
+ }
+ /* If failed, try to call standard method */
+ return dwfl_linux_kernel_find_elf(mod, userdata, module_name, base,
+ file_name, elfp);
+}
+
+static const Dwfl_Callbacks kernel_callbacks = {
+ .find_debuginfo = dwfl_standard_find_debuginfo,
+ .debuginfo_path = &debuginfo_path,
+
+ .find_elf = __linux_kernel_find_elf,
+ .section_address = dwfl_linux_kernel_module_section_address,
+};
+
/* Get a Dwarf from live kernel image */
static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr, Dwfl **dwflp,
Dwarf_Addr *bias)
dbg = dwfl_addrdwarf(*dwflp, addr, bias);
/* Here, check whether we could get a real dwarf */
if (!dbg) {
+ pr_debug("Failed to find kernel dwarf at %lx\n",
+ (unsigned long)addr);
dwfl_end(*dwflp);
*dwflp = NULL;
}
return dbg;
}
+#else
+/* With older elfutils, this just support kernel module... */
+static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr __used, Dwfl **dwflp,
+ Dwarf_Addr *bias)
+{
+ int fd;
+ const char *path = kernel_get_module_path("kernel");
+
+ if (!path) {
+ pr_err("Failed to find vmlinux path\n");
+ return NULL;
+ }
+
+ pr_debug2("Use file %s for debuginfo\n", path);
+ fd = open(path, O_RDONLY);
+ if (fd < 0)
+ return NULL;
+
+ return dwfl_init_offline_dwarf(fd, dwflp, bias);
+}
+#endif
/* Dwarf wrappers */
if (!*pat) /* Tail wild card matches all */
return true;
while (*str)
- if (strglobmatch(str++, pat))
+ if (__match_glob(str++, pat, ignore_space))
return true;
}
return !*str && !*pat;
{
struct rb_node **p = &self->rb_node;
struct rb_node *parent = NULL;
- struct symbol_name_rb_node *symn = ((void *)sym) - sizeof(*parent), *s;
+ struct symbol_name_rb_node *symn, *s;
+
+ symn = container_of(sym, struct symbol_name_rb_node, sym);
while (*p != NULL) {
parent = *p;
struct machine *machine = kmaps->machine;
struct map *curr_map = map;
struct symbol *pos;
- int count = 0;
+ int count = 0, moved = 0;
struct rb_root *root = &self->symbols[map->type];
struct rb_node *next = rb_first(root);
int kernel_range = 0;
char dso_name[PATH_MAX];
struct dso *dso;
+ if (count == 0) {
+ curr_map = map;
+ goto filter_symbol;
+ }
+
if (self->kernel == DSO_TYPE_GUEST_KERNEL)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
map_groups__insert(kmaps, curr_map);
++kernel_range;
}
-
+filter_symbol:
if (filter && filter(curr_map, pos)) {
discard_symbol: rb_erase(&pos->rb_node, root);
symbol__delete(pos);
if (curr_map != map) {
rb_erase(&pos->rb_node, root);
symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
- }
- count++;
+ ++moved;
+ } else
+ ++count;
}
}
dso__set_loaded(curr_map->dso, curr_map->type);
}
- return count;
+ return count + moved;
}
int dso__load_kallsyms(struct dso *self, const char *filename,
return -1;
}
-static int dso__load_vmlinux(struct dso *self, struct map *map,
- const char *vmlinux, symbol_filter_t filter)
+int dso__load_vmlinux(struct dso *self, struct map *map,
+ const char *vmlinux, symbol_filter_t filter)
{
int err = -1, fd;
return kernel;
}
+struct process_args {
+ u64 start;
+};
+
+static int symbol__in_kernel(void *arg, const char *name,
+ char type __used, u64 start)
+{
+ struct process_args *args = arg;
+
+ if (strchr(name, '['))
+ return 0;
+
+ args->start = start;
+ return 1;
+}
+
+/* Figure out the start address of kernel map from /proc/kallsyms */
+static u64 machine__get_kernel_start_addr(struct machine *machine)
+{
+ const char *filename;
+ char path[PATH_MAX];
+ struct process_args args;
+
+ if (machine__is_host(machine)) {
+ filename = "/proc/kallsyms";
+ } else {
+ if (machine__is_default_guest(machine))
+ filename = (char *)symbol_conf.default_guest_kallsyms;
+ else {
+ sprintf(path, "%s/proc/kallsyms", machine->root_dir);
+ filename = path;
+ }
+ }
+
+ if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
+ return 0;
+
+ return args.start;
+}
+
int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
{
enum map_type type;
+ u64 start = machine__get_kernel_start_addr(self);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
- self->vmlinux_maps[type] = map__new2(0, kernel, type);
+ self->vmlinux_maps[type] = map__new2(start, kernel, type);
if (self->vmlinux_maps[type] == NULL)
return -1;
struct dso *__dsos__findnew(struct list_head *head, const char *name);
int dso__load(struct dso *self, struct map *map, symbol_filter_t filter);
+int dso__load_vmlinux(struct dso *self, struct map *map,
+ const char *vmlinux, symbol_filter_t filter);
int dso__load_vmlinux_path(struct dso *self, struct map *map,
symbol_filter_t filter);
int dso__load_kallsyms(struct dso *self, const char *filename, struct map *map,
*/
#include <linux/stringify.h>
+#include <asm-generic/vmlinux.lds.h>
.section .init.ramfs,"a"
__irf_start:
.incbin __stringify(INITRAMFS_IMAGE)
__irf_end:
.section .init.ramfs.info,"a"
-.globl __initramfs_size
-__initramfs_size:
+.globl VMLINUX_SYMBOL(__initramfs_size)
+VMLINUX_SYMBOL(__initramfs_size):
#ifdef CONFIG_64BIT
.quad __irf_end - __irf_start
#else
projects / cascardo / linux.git / commitdiff