MIPS: PNX833x: Remove checks for CONFIG_I2C_PNX0105

Checks for CONFIG_I2C_PNX0105 were added in v2.6.28. But the related
Kconfig symbol has not been added to the tree. Remove these checks.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 2b7e837..b4b774b 100644 (file)
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -33,11 +33,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#ifdef CONFIG_I2C_PNX0105
-/* Until i2c driver available in kernel.*/
-#include <linux/i2c-pnx0105.h>
-#endif
-
 #include <irq.h>
 #include <irq-mapping.h>
 #include <pnx833x.h>
@@ -134,70 +129,6 @@ static struct platform_device pnx833x_usb_ehci_device = {
        .resource       = pnx833x_usb_ehci_resources,
 };
 
-#ifdef CONFIG_I2C_PNX0105
-static struct resource pnx833x_i2c0_resources[] = {
-       {
-               .start          = PNX833X_I2C0_PORTS_START,
-               .end            = PNX833X_I2C0_PORTS_END,
-               .flags          = IORESOURCE_MEM,
-       },
-       {
-               .start          = PNX833X_PIC_I2C0_INT,
-               .end            = PNX833X_PIC_I2C0_INT,
-               .flags          = IORESOURCE_IRQ,
-       },
-};
-
-static struct resource pnx833x_i2c1_resources[] = {
-       {
-               .start          = PNX833X_I2C1_PORTS_START,
-               .end            = PNX833X_I2C1_PORTS_END,
-               .flags          = IORESOURCE_MEM,
-       },
-       {
-               .start          = PNX833X_PIC_I2C1_INT,
-               .end            = PNX833X_PIC_I2C1_INT,
-               .flags          = IORESOURCE_IRQ,
-       },
-};
-
-static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
-       {
-               .base = PNX833X_I2C0_PORTS_START,
-               .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
-               .clock = 6,     /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */
-               .bus_addr = 0,  /* no slave support */
-       },
-       {
-               .base = PNX833X_I2C1_PORTS_START,
-               .irq = -1,      /* on high freq, polling is faster */
-               /*.irq = PNX833X_PIC_I2C1_INT,*/
-               .clock = 4,     /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
-               .bus_addr = 0,  /* no slave support */
-       },
-};
-
-static struct platform_device pnx833x_i2c0_device = {
-       .name           = "i2c-pnx0105",
-       .id             = 0,
-       .dev = {
-               .platform_data = &pnx833x_i2c_dev[0],
-       },
-       .num_resources  = ARRAY_SIZE(pnx833x_i2c0_resources),
-       .resource       = pnx833x_i2c0_resources,
-};
-
-static struct platform_device pnx833x_i2c1_device = {
-       .name           = "i2c-pnx0105",
-       .id             = 1,
-       .dev = {
-               .platform_data = &pnx833x_i2c_dev[1],
-       },
-       .num_resources  = ARRAY_SIZE(pnx833x_i2c1_resources),
-       .resource       = pnx833x_i2c1_resources,
-};
-#endif
-
 static u64 ethernet_dmamask = DMA_BIT_MASK(32);
 
 static struct resource pnx833x_ethernet_resources[] = {
@@ -294,10 +225,6 @@ static struct platform_device pnx833x_flash_nand = {
 static struct platform_device *pnx833x_platform_devices[] __initdata = {
        &pnx833x_uart_device,
        &pnx833x_usb_ehci_device,
-#ifdef CONFIG_I2C_PNX0105
-       &pnx833x_i2c0_device,
-       &pnx833x_i2c1_device,
-#endif
        &pnx833x_ethernet_device,
        &pnx833x_sata_device,
        &pnx833x_flash_nand,