help
Enable S5PV210 CPU support
-config S5PV210_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S5PV210_SETUP_I2C2
- bool
- help
- Common setup code for i2c bus 2.
-
-config S5PV210_SETUP_IDE
- bool
- help
- Common setup code for S5PV210 IDE GPIO configurations
-
-config S5PV210_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5PV210 with an 24bpp RGB display helper.
-
-config S5PV210_SETUP_KEYPAD
- bool
- help
- Common setup code for keypad.
-
-config S5PV210_SETUP_SDHCI
- bool
- select S5PV210_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S5PV210 based SDHCI systems
-
-config S5PV210_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config S5PV210_SETUP_FIMC
- bool
- help
- Common setup code for the camera interfaces.
-
-config S5PV210_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations.
-
-config S5PV210_SETUP_USB_PHY
- bool
- help
- Common setup code for USB PHY controller
-
-menu "S5PC110 Machines"
-
-config MACH_AQUILA
- bool "Aquila"
- select CPU_S5PV210
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_USB_PHY
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_ONENAND
- help
- Machine support for the Samsung Aquila target based on S5PC110 SoC
-
-config MACH_GONI
- bool "GONI"
- select CPU_S5PV210
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_I2C2
- select S3C_DEV_USB_HSOTG
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_FIMC
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_KEYPAD
- select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_USB_PHY
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_MFC
- select S5P_DEV_ONENAND
- select S5P_DEV_TV
- select S5P_GPIO_INT
- select SAMSUNG_DEV_KEYPAD
- help
- Machine support for Samsung GONI board
- S5PC110(MCP) is one of package option of S5PV210
-
-config MACH_SMDKC110
- bool "SMDKC110"
- select CPU_S5PV210
- select S3C_DEV_I2C1
- select S3C_DEV_I2C2
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_IDE
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_MFC
- select SAMSUNG_DEV_IDE
- help
- Machine support for Samsung SMDKC110
- S5PC110(MCP) is one of package option of S5PV210
-
-endmenu
-
menu "S5PV210 Machines"
-config MACH_SMDKV210
- bool "SMDKV210"
- select CPU_S5PV210
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C2
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_IDE
- select S5PV210_SETUP_KEYPAD
- select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_USB_PHY
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for Samsung SMDKV210
-
-config MACH_TORBRECK
- bool "Torbreck"
- select ARCH_SPARSEMEM_ENABLE
- select CPU_S5PV210
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C2
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_SDHCI
- select SAMSUNG_DEV_IDE
- help
- Machine support for aESOP Torbreck
-
config MACH_S5PV210_DT
bool "Samsung S5PV210/S5PC110 machine using Device Tree"
select CLKSRC_OF
# Core
-obj-y += common.o
obj-$(CONFIG_PM) += pm.o
-obj-y += dma.o
-
# machine support
-obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o
-obj-$(CONFIG_MACH_GONI) += mach-goni.o
-obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
-obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
-obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o
obj-$(CONFIG_MACH_S5PV210_DT) += s5pv210.o
# device support
-obj-y += dev-audio.o
-
obj-y += setup-i2c0.o
-obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o
-obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
-obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o
+++ /dev/null
-/*
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Codes for S5PV210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/of.h>
-
-#include <asm/proc-fns.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/keypad-core.h>
-#include <plat/pwm-core.h>
-#include <plat/tv-core.h>
-#include <plat/spi-core.h>
-
-#include "common.h"
-
-/* External clock frequency */
-static unsigned long xusbxti_f;
-
-static const char name_s5pv210[] = "S5PV210/S5PC110";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5PV210_CPU_ID,
- .idmask = S5PV210_CPU_MASK,
- .map_io = s5pv210_map_io,
- .init_clocks = s5pv210_init_clocks,
- .init_uarts = s5pv210_init_uarts,
- .init = s5pv210_init,
- .name = name_s5pv210,
- },
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pv210_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PV210_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5PV210_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5PV210_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5PV210_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5PV210_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5PV210_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5PV210_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5PV210_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC3,
- .pfn = __phys_to_pfn(S5PV210_PA_VIC3),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_DMC0,
- .pfn = __phys_to_pfn(S5PV210_PA_DMC0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_DMC1,
- .pfn = __phys_to_pfn(S5PV210_PA_DMC1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn =__phys_to_pfn(S5PV210_PA_HSPHY),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }
-};
-
-void s5pv210_restart(enum reboot_mode mode, const char *cmd)
-{
- __raw_writel(0x1, S5P_SWRESET);
-}
-
-static struct samsung_pwm_variant s5pv210_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = (1 << 5),
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s5pv210_pwm_variant);
-}
-
-/*
- * s5pv210_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(S5P_VA_CHIPID);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
- samsung_pwm_set_platdata(&s5pv210_pwm_variant);
-}
-
-void __init s5pv210_map_io(void)
-{
- /* initialise device information early */
- s5pv210_default_sdhci0();
- s5pv210_default_sdhci1();
- s5pv210_default_sdhci2();
- s5pv210_default_sdhci3();
-
- s3c_adc_setname("samsung-adc-v3");
-
- s3c_cfcon_setname("s5pv210-pata");
-
- s3c_fimc_setname(0, "s5pv210-fimc");
- s3c_fimc_setname(1, "s5pv210-fimc");
- s3c_fimc_setname(2, "s5pv210-fimc");
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s3c_fb_setname("s5pv210-fb");
-
- /* Use s5pv210-keypad instead of samsung-keypad */
- samsung_keypad_setname("s5pv210-keypad");
-
- /* setup TV devices */
- s5p_hdmi_setname("s5pv210-hdmi");
-
- s3c64xx_spi_setname("s5pv210-spi");
-}
-
-void __init s5pv210_init_clocks(int xtal)
-{
- xusbxti_f = xtal;
-}
-
-void __init s5pv210_init_irq(void)
-{
- u32 vic[4]; /* S5PV210 supports 4 VIC */
-
- s5pv210_clk_init(0, xusbxti_f, S3C_VA_SYS);
-
- /* All the VICs are fully populated. */
- vic[0] = ~0;
- vic[1] = ~0;
- vic[2] = ~0;
- vic[3] = ~0;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct bus_type s5pv210_subsys = {
- .name = "s5pv210-core",
- .dev_name = "s5pv210-core",
-};
-
-static struct device s5pv210_dev = {
- .bus = &s5pv210_subsys,
-};
-
-static int __init s5pv210_core_init(void)
-{
- return subsys_system_register(&s5pv210_subsys, NULL);
-}
-core_initcall(s5pv210_core_init);
-
-int __init s5pv210_init(void)
-{
- printk(KERN_INFO "S5PV210: Initializing architecture\n");
- return device_register(&s5pv210_dev);
-}
-
-/* uart registration process */
-
-void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H
#define __ARCH_ARM_MACH_S5PV210_COMMON_H
-#include <linux/reboot.h>
-
-void s5pv210_clk_init(unsigned long xxti_f, unsigned long xusbxti_f,
- void __iomem *reg_base);
-
-void s5pv210_init_io(struct map_desc *mach_desc, int size);
-void s5pv210_init_irq(void);
-
-void s5pv210_register_clocks(void);
-void s5pv210_setup_clocks(void);
-
-void s5pv210_restart(enum reboot_mode mode, const char *cmd);
-
-extern int s5pv210_init(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-#define S5PV210_AUDSS_INT_MEM (0xC0000000)
-
-static int s5pv210_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
- break;
- case 1:
- s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
- .cfg_gpio = s5pv210_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
- | QUIRK_NEED_RSTCLR,
- .idma_addr = S5PV210_AUDSS_INT_MEM,
- },
- },
-};
-
-static struct resource s5pv210_iis0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
- [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
-};
-
-struct platform_device s5pv210_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pv210_iis0_resource),
- .resource = s5pv210_iis0_resource,
- .dev = {
- .platform_data = &i2sv5_pdata,
- },
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = s5pv210_cfg_i2s,
-};
-
-static struct resource s5pv210_iis1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5pv210_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pv210_iis1_resource),
- .resource = s5pv210_iis1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-static struct resource s5pv210_iis2_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5pv210_device_iis2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pv210_iis2_resource),
- .resource = s5pv210_iis2_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3));
- break;
- case 1:
- s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2));
- break;
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = s5pv210_pcm_cfg_gpio,
-};
-
-static struct resource s5pv210_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5pv210_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pv210_pcm0_resource),
- .resource = s5pv210_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5pv210_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
-};
-
-struct platform_device s5pv210_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pv210_pcm1_resource),
- .resource = s5pv210_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5pv210_pcm2_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM2_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM2_RX),
-};
-
-struct platform_device s5pv210_device_pcm2 = {
- .name = "samsung-pcm",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pv210_pcm2_resource),
- .resource = s5pv210_pcm2_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pv210_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
- [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
- [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
- [4] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
- .cfg_gpio = s5pv210_ac97_cfg_gpio,
-};
-
-static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pv210_ac97_resource),
- .resource = s5pv210_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &s5pv210_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/* S/PDIF Controller platform_device */
-
-static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static struct resource s5pv210_spdif_resource[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPDIF),
-};
-
-static struct s3c_audio_pdata samsung_spdif_pdata = {
- .cfg_gpio = s5pv210_spdif_cfg_gpio,
-};
-
-static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_spdif = {
- .name = "samsung-spdif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pv210_spdif_resource),
- .resource = s5pv210_spdif_resource,
- .dev = {
- .platform_data = &samsung_spdif_pdata,
- .dma_mask = &s5pv210_spdif_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 pdma0_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_MAX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_MAX,
- DMACH_PWM,
- DMACH_SPDIF,
-};
-
-static struct dma_pl330_platdata s5pv210_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330,
- S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_MAX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_MSM_REQ0,
- DMACH_MSM_REQ1,
- DMACH_MSM_REQ2,
- DMACH_MSM_REQ3,
- DMACH_PCM2_RX,
- DMACH_PCM2_TX,
-};
-
-static struct dma_pl330_platdata s5pv210_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330,
- S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
-
-static int __init s5pv210_dma_init(void)
-{
- dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
- amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
-
- dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
- amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s5pv210_dma_init);
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/mach-aquila.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mfd/max8998.h>
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/regulator/fixed.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/fimc-core.h>
-#include <plat/sdhci.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = AQUILA_UCON_DEFAULT,
- .ulcon = AQUILA_ULCON_DEFAULT,
- /*
- * Actually UART0 can support 256 bytes fifo, but aquila board
- * supports 128 bytes fifo because of initial chip bug
- */
- .ufcon = AQUILA_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = AQUILA_UCON_DEFAULT,
- .ulcon = AQUILA_ULCON_DEFAULT,
- .ufcon = AQUILA_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = AQUILA_UCON_DEFAULT,
- .ulcon = AQUILA_ULCON_DEFAULT,
- .ufcon = AQUILA_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = AQUILA_UCON_DEFAULT,
- .ulcon = AQUILA_ULCON_DEFAULT,
- .ufcon = AQUILA_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
- },
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win aquila_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 800,
-};
-
-static struct s3c_fb_pd_win aquila_fb_win1 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 800,
-};
-
-static struct fb_videomode aquila_lcd_timing = {
- .left_margin = 16,
- .right_margin = 16,
- .upper_margin = 3,
- .lower_margin = 28,
- .hsync_len = 2,
- .vsync_len = 2,
- .xres = 480,
- .yres = 800,
-};
-
-static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
- .win[0] = &aquila_fb_win0,
- .win[1] = &aquila_fb_win1,
- .vtiming = &aquila_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
- .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
-};
-
-/* MAX8998 regulators */
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
-
-static struct regulator_init_data aquila_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data aquila_ldo3_data = {
- .constraints = {
- .name = "VUSB+MIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo4_data = {
- .constraints = {
- .name = "VDAC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo5_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo6_data = {
- .constraints = {
- .name = "VCC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo7_data = {
- .constraints = {
- .name = "VCC_3.0V",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .boot_on = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo8_data = {
- .constraints = {
- .name = "VUSB+VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo9_data = {
- .constraints = {
- .name = "VCC+VCAM_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .boot_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo11_data = {
- .constraints = {
- .name = "CAM_IO_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo12_data = {
- .constraints = {
- .name = "CAM_ISP_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo13_data = {
- .constraints = {
- .name = "CAM_A_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo14_data = {
- .constraints = {
- .name = "CAM_CIF_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo15_data = {
- .constraints = {
- .name = "CAM_AF_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo16_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data aquila_ldo17_data = {
- .constraints = {
- .name = "CAM_8M_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-/* BUCK */
-static struct regulator_consumer_supply buck1_consumer =
- REGULATOR_SUPPLY("vddarm", NULL);
-
-static struct regulator_consumer_supply buck2_consumer =
- REGULATOR_SUPPLY("vddint", NULL);
-
-static struct regulator_init_data aquila_buck1_data = {
- .constraints = {
- .name = "VARM_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &buck1_consumer,
-};
-
-static struct regulator_init_data aquila_buck2_data = {
- .constraints = {
- .name = "VINT_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &buck2_consumer,
-};
-
-static struct regulator_init_data aquila_buck3_data = {
- .constraints = {
- .name = "VCC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data aquila_buck4_data = {
- .constraints = {
- .name = "CAM_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct max8998_regulator_data aquila_regulators[] = {
- { MAX8998_LDO2, &aquila_ldo2_data },
- { MAX8998_LDO3, &aquila_ldo3_data },
- { MAX8998_LDO4, &aquila_ldo4_data },
- { MAX8998_LDO5, &aquila_ldo5_data },
- { MAX8998_LDO6, &aquila_ldo6_data },
- { MAX8998_LDO7, &aquila_ldo7_data },
- { MAX8998_LDO8, &aquila_ldo8_data },
- { MAX8998_LDO9, &aquila_ldo9_data },
- { MAX8998_LDO10, &aquila_ldo10_data },
- { MAX8998_LDO11, &aquila_ldo11_data },
- { MAX8998_LDO12, &aquila_ldo12_data },
- { MAX8998_LDO13, &aquila_ldo13_data },
- { MAX8998_LDO14, &aquila_ldo14_data },
- { MAX8998_LDO15, &aquila_ldo15_data },
- { MAX8998_LDO16, &aquila_ldo16_data },
- { MAX8998_LDO17, &aquila_ldo17_data },
- { MAX8998_BUCK1, &aquila_buck1_data },
- { MAX8998_BUCK2, &aquila_buck2_data },
- { MAX8998_BUCK3, &aquila_buck3_data },
- { MAX8998_BUCK4, &aquila_buck4_data },
-};
-
-static struct max8998_platform_data aquila_max8998_pdata = {
- .num_regulators = ARRAY_SIZE(aquila_regulators),
- .regulators = aquila_regulators,
- .buck1_set1 = S5PV210_GPH0(3),
- .buck1_set2 = S5PV210_GPH0(4),
- .buck2_set3 = S5PV210_GPH0(5),
- .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 },
- .buck2_voltage = { 1200000, 1200000 },
-};
-#endif
-
-static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
- REGULATOR_SUPPLY("DBVDD", "5-001a"),
- REGULATOR_SUPPLY("AVDD2", "5-001a"),
- REGULATOR_SUPPLY("CPVDD", "5-001a"),
-};
-
-static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
- REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
- REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
-};
-
-static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
- .consumer_supplies = wm8994_fixed_voltage0_supplies,
-};
-
-static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
- .consumer_supplies = wm8994_fixed_voltage1_supplies,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
- .supply_name = "VCC_1.8V_PDA",
- .microvolts = 1800000,
- .gpio = -EINVAL,
- .init_data = &wm8994_fixed_voltage0_init_data,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
- .supply_name = "V_BAT",
- .microvolts = 3700000,
- .gpio = -EINVAL,
- .init_data = &wm8994_fixed_voltage1_init_data,
-};
-
-static struct platform_device wm8994_fixed_voltage0 = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &wm8994_fixed_voltage0_config,
- },
-};
-
-static struct platform_device wm8994_fixed_voltage1 = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &wm8994_fixed_voltage1_config,
- },
-};
-
-static struct regulator_consumer_supply wm8994_avdd1_supply =
- REGULATOR_SUPPLY("AVDD1", "5-001a");
-
-static struct regulator_consumer_supply wm8994_dcvdd_supply =
- REGULATOR_SUPPLY("DCVDD", "5-001a");
-
-static struct regulator_init_data wm8994_ldo1_data = {
- .constraints = {
- .name = "AVDD1_3.0V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &wm8994_avdd1_supply,
-};
-
-static struct regulator_init_data wm8994_ldo2_data = {
- .constraints = {
- .name = "DCVDD_1.0V",
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &wm8994_dcvdd_supply,
-};
-
-static struct wm8994_pdata wm8994_platform_data = {
- /* configure gpio1 function: 0x0001(Logic level input/output) */
- .gpio_defaults[0] = 0x0001,
- /* configure gpio3/4/5/7 function for AIF2 voice */
- .gpio_defaults[2] = 0x8100,
- .gpio_defaults[3] = 0x8100,
- .gpio_defaults[4] = 0x8100,
- .gpio_defaults[6] = 0x0100,
- /* configure gpio8/9/10/11 function for AIF3 BT */
- .gpio_defaults[7] = 0x8100,
- .gpio_defaults[8] = 0x0100,
- .gpio_defaults[9] = 0x0100,
- .gpio_defaults[10] = 0x0100,
- .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
- .ldo[1] = { 0, &wm8994_ldo2_data },
-};
-
-/* GPIO I2C PMIC */
-#define AP_I2C_GPIO_PMIC_BUS_4 4
-static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
- .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
- .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
-};
-
-static struct platform_device aquila_i2c_gpio_pmic = {
- .name = "i2c-gpio",
- .id = AP_I2C_GPIO_PMIC_BUS_4,
- .dev = {
- .platform_data = &aquila_i2c_gpio_pmic_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
- {
- /* 0xCC when SRAD = 0 */
- I2C_BOARD_INFO("max8998", 0xCC >> 1),
- .platform_data = &aquila_max8998_pdata,
- },
-#endif
-};
-
-/* GPIO I2C AP 1.8V */
-#define AP_I2C_GPIO_BUS_5 5
-static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
- .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
- .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
-};
-
-static struct platform_device aquila_i2c_gpio5 = {
- .name = "i2c-gpio",
- .id = AP_I2C_GPIO_BUS_5,
- .dev = {
- .platform_data = &aquila_i2c_gpio5_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
- {
- /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
- I2C_BOARD_INFO("wm8994", 0x1a),
- .platform_data = &wm8994_platform_data,
- },
-};
-
-/* PMIC Power button */
-static struct gpio_keys_button aquila_gpio_keys_table[] = {
- {
- .code = KEY_POWER,
- .gpio = S5PV210_GPH2(6),
- .desc = "gpio-keys: KEY_POWER",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data aquila_gpio_keys_data = {
- .buttons = aquila_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
-};
-
-static struct platform_device aquila_device_gpiokeys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &aquila_gpio_keys_data,
- },
-};
-
-static void __init aquila_pmic_init(void)
-{
- /* AP_PMIC_IRQ: EINT7 */
- s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
-
- /* nPower: EINT22 */
- s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
-}
-
-/* MoviNAND */
-static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-/* Wireless LAN */
-static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
- /* ext_cd_{init,cleanup} callbacks will be added later */
-};
-
-/* External Flash */
-#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
-#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
-static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = AQUILA_EXT_FLASH_CD,
- .ext_cd_gpio_invert = 1,
-};
-
-static void aquila_setup_sdhci(void)
-{
- gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");
-
- s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
- s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
- s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
-};
-
-/* Audio device */
-static struct platform_device aquila_device_audio = {
- .name = "smdk-audio",
- .id = -1,
-};
-
-static struct platform_device *aquila_devices[] __initdata = {
- &aquila_i2c_gpio_pmic,
- &aquila_i2c_gpio5,
- &aquila_device_gpiokeys,
- &aquila_device_audio,
- &s3c_device_fb,
- &s5p_device_onenand,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc_md,
- &s5pv210_device_iis0,
- &wm8994_fixed_voltage0,
- &wm8994_fixed_voltage1,
-};
-
-static void __init aquila_sound_init(void)
-{
- unsigned int gpio;
-
- /* CODEC_XTAL_EN
- *
- * The Aquila board have a oscillator which provide main clock
- * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
- * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
- * */
- gpio = S5PV210_GPH3(2); /* XEINT_26 */
- gpio_request(gpio, "CODEC_XTAL_EN");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
- * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
- * because it needs 24MHz clock to operate WM8994 codec.
- */
- __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
-}
-
-static void __init aquila_map_io(void)
-{
- s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init aquila_machine_init(void)
-{
- /* PMIC */
- aquila_pmic_init();
- i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
- ARRAY_SIZE(i2c_gpio_pmic_devs));
- /* SDHCI */
- aquila_setup_sdhci();
-
- s3c_fimc_setname(0, "s5p-fimc");
- s3c_fimc_setname(1, "s5p-fimc");
- s3c_fimc_setname(2, "s5p-fimc");
-
- /* SOUND */
- aquila_sound_init();
- i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
- ARRAY_SIZE(i2c_gpio5_devs));
-
- /* FB */
- s3c_fb_set_platdata(&aquila_lcd_pdata);
-
- platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
-}
-
-MACHINE_START(AQUILA, "Aquila")
- /* Maintainers:
- Marek Szyprowski <m.szyprowski@samsung.com>
- Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pv210_init_irq,
- .map_io = aquila_map_io,
- .init_machine = aquila_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pv210_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/mach-goni.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/mfd/max8998.h>
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lcd.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/samsung-time.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = GONI_UCON_DEFAULT,
- .ulcon = GONI_ULCON_DEFAULT,
- .ufcon = GONI_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = GONI_UCON_DEFAULT,
- .ulcon = GONI_ULCON_DEFAULT,
- .ufcon = GONI_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = GONI_UCON_DEFAULT,
- .ulcon = GONI_ULCON_DEFAULT,
- .ufcon = GONI_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = GONI_UCON_DEFAULT,
- .ulcon = GONI_ULCON_DEFAULT,
- .ufcon = GONI_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
- },
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win goni_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 800,
- .virtual_x = 480,
- .virtual_y = 2 * 800,
-};
-
-static struct fb_videomode goni_lcd_timing = {
- .left_margin = 16,
- .right_margin = 16,
- .upper_margin = 2,
- .lower_margin = 28,
- .hsync_len = 2,
- .vsync_len = 1,
- .xres = 480,
- .yres = 800,
- .refresh = 55,
-};
-
-static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
- .win[0] = &goni_fb_win0,
- .vtiming = &goni_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
- | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
-};
-
-static int lcd_power_on(struct lcd_device *ld, int enable)
-{
- return 1;
-}
-
-static int reset_lcd(struct lcd_device *ld)
-{
- static unsigned int first = 1;
- int reset_gpio = -1;
-
- reset_gpio = S5PV210_MP05(5);
-
- if (first) {
- gpio_request(reset_gpio, "MLCD_RST");
- first = 0;
- }
-
- gpio_direction_output(reset_gpio, 1);
- return 1;
-}
-
-static struct lcd_platform_data goni_lcd_platform_data = {
- .reset = reset_lcd,
- .power_on = lcd_power_on,
- .lcd_enabled = 0,
- .reset_delay = 120, /* 120ms */
- .power_on_delay = 25, /* 25ms */
- .power_off_delay = 200, /* 200ms */
-};
-
-#define LCD_BUS_NUM 3
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "s6e63m0",
- .platform_data = &goni_lcd_platform_data,
- .max_speed_hz = 1200000,
- .bus_num = LCD_BUS_NUM,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
- },
-};
-
-static struct spi_gpio_platform_data lcd_spi_gpio_data = {
- .sck = S5PV210_MP04(1), /* DISPLAY_CLK */
- .mosi = S5PV210_MP04(3), /* DISPLAY_SI */
- .miso = SPI_GPIO_NO_MISO,
- .num_chipselect = 1,
-};
-
-static struct platform_device goni_spi_gpio = {
- .name = "spi_gpio",
- .id = LCD_BUS_NUM,
- .dev = {
- .parent = &s3c_device_fb.dev,
- .platform_data = &lcd_spi_gpio_data,
- },
-};
-
-/* KEYPAD */
-static uint32_t keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 1, KEY_MENU), /* Send */
- KEY(0, 2, KEY_BACK), /* End */
- KEY(1, 1, KEY_CONFIG), /* Half shot */
- KEY(1, 2, KEY_VOLUMEUP),
- KEY(2, 1, KEY_CAMERA), /* Full shot */
- KEY(2, 2, KEY_VOLUMEDOWN),
-};
-
-static struct matrix_keymap_data keymap_data __initdata = {
- .keymap = keymap,
- .keymap_size = ARRAY_SIZE(keymap),
-};
-
-static struct samsung_keypad_platdata keypad_data __initdata = {
- .keymap_data = &keymap_data,
- .rows = 3,
- .cols = 3,
-};
-
-/* Radio */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- {
- I2C_BOARD_INFO("si470x", 0x10),
- },
-};
-
-static void __init goni_radio_init(void)
-{
- int gpio;
-
- gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */
- gpio_request(gpio, "FM_INT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- i2c1_devs[0].irq = gpio_to_irq(gpio);
-
- gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */
- gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST");
-}
-
-/* TSP */
-static struct mxt_platform_data qt602240_platform_data = {
- .irqflags = IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c2_data __initdata = {
- .flags = 0,
- .bus_num = 2,
- .slave_addr = 0x10,
- .frequency = 400 * 1000,
- .sda_delay = 100,
-};
-
-static struct i2c_board_info i2c2_devs[] __initdata = {
- {
- I2C_BOARD_INFO("qt602240_ts", 0x4a),
- .platform_data = &qt602240_platform_data,
- },
-};
-
-static void __init goni_tsp_init(void)
-{
- int gpio;
-
- gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */
- gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
- gpio_export(gpio, 0);
-
- gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */
- gpio_request(gpio, "TSP_INT");
-
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- i2c2_devs[0].irq = gpio_to_irq(gpio);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat goni_hsotg_pdata;
-
-/* MAX8998 regulators */
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
-
-static struct regulator_consumer_supply goni_ldo3_consumers[] = {
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
-};
-
-static struct regulator_consumer_supply goni_ldo5_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
-};
-
-static struct regulator_consumer_supply goni_ldo8_consumers[] = {
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
- REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_consumer_supply goni_ldo11_consumers[] = {
- REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */
-};
-
-static struct regulator_consumer_supply goni_ldo13_consumers[] = {
- REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */
-};
-
-static struct regulator_consumer_supply goni_ldo14_consumers[] = {
- REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */
-};
-
-static struct regulator_init_data goni_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data goni_ldo3_data = {
- .constraints = {
- .name = "VUSB+MIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers),
- .consumer_supplies = goni_ldo3_consumers,
-};
-
-static struct regulator_init_data goni_ldo4_data = {
- .constraints = {
- .name = "VDAC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo5_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
- .consumer_supplies = goni_ldo5_consumers,
-};
-
-static struct regulator_init_data goni_ldo6_data = {
- .constraints = {
- .name = "VCC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo7_data = {
- .constraints = {
- .name = "VLCD_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo8_data = {
- .constraints = {
- .name = "VUSB+VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers),
- .consumer_supplies = goni_ldo8_consumers,
-};
-
-static struct regulator_init_data goni_ldo9_data = {
- .constraints = {
- .name = "VCC+VCAM_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .boot_on = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo11_data = {
- .constraints = {
- .name = "CAM_IO_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(goni_ldo11_consumers),
- .consumer_supplies = goni_ldo11_consumers,
-};
-
-static struct regulator_init_data goni_ldo12_data = {
- .constraints = {
- .name = "CAM_ISP_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo13_data = {
- .constraints = {
- .name = "CAM_A_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(goni_ldo13_consumers),
- .consumer_supplies = goni_ldo13_consumers,
-};
-
-static struct regulator_init_data goni_ldo14_data = {
- .constraints = {
- .name = "CAM_CIF_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(goni_ldo14_consumers),
- .consumer_supplies = goni_ldo14_consumers,
-};
-
-static struct regulator_init_data goni_ldo15_data = {
- .constraints = {
- .name = "CAM_AF_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo16_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data goni_ldo17_data = {
- .constraints = {
- .name = "VCC_3.0V_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-/* BUCK */
-static struct regulator_consumer_supply buck1_consumer =
- REGULATOR_SUPPLY("vddarm", NULL);
-
-static struct regulator_consumer_supply buck2_consumer =
- REGULATOR_SUPPLY("vddint", NULL);
-
-static struct regulator_consumer_supply buck3_consumer =
- REGULATOR_SUPPLY("vdet", "s5p-sdo");
-
-
-static struct regulator_init_data goni_buck1_data = {
- .constraints = {
- .name = "VARM_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &buck1_consumer,
-};
-
-static struct regulator_init_data goni_buck2_data = {
- .constraints = {
- .name = "VINT_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &buck2_consumer,
-};
-
-static struct regulator_init_data goni_buck3_data = {
- .constraints = {
- .name = "VCC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &buck3_consumer,
-};
-
-static struct regulator_init_data goni_buck4_data = {
- .constraints = {
- .name = "CAM_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct max8998_regulator_data goni_regulators[] = {
- { MAX8998_LDO2, &goni_ldo2_data },
- { MAX8998_LDO3, &goni_ldo3_data },
- { MAX8998_LDO4, &goni_ldo4_data },
- { MAX8998_LDO5, &goni_ldo5_data },
- { MAX8998_LDO6, &goni_ldo6_data },
- { MAX8998_LDO7, &goni_ldo7_data },
- { MAX8998_LDO8, &goni_ldo8_data },
- { MAX8998_LDO9, &goni_ldo9_data },
- { MAX8998_LDO10, &goni_ldo10_data },
- { MAX8998_LDO11, &goni_ldo11_data },
- { MAX8998_LDO12, &goni_ldo12_data },
- { MAX8998_LDO13, &goni_ldo13_data },
- { MAX8998_LDO14, &goni_ldo14_data },
- { MAX8998_LDO15, &goni_ldo15_data },
- { MAX8998_LDO16, &goni_ldo16_data },
- { MAX8998_LDO17, &goni_ldo17_data },
- { MAX8998_BUCK1, &goni_buck1_data },
- { MAX8998_BUCK2, &goni_buck2_data },
- { MAX8998_BUCK3, &goni_buck3_data },
- { MAX8998_BUCK4, &goni_buck4_data },
-};
-
-static struct max8998_platform_data goni_max8998_pdata = {
- .num_regulators = ARRAY_SIZE(goni_regulators),
- .regulators = goni_regulators,
- .buck1_set1 = S5PV210_GPH0(3),
- .buck1_set2 = S5PV210_GPH0(4),
- .buck2_set3 = S5PV210_GPH0(5),
- .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 },
- .buck2_voltage = { 1200000, 1200000 },
-};
-#endif
-
-static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
- REGULATOR_SUPPLY("DBVDD", "5-001a"),
- REGULATOR_SUPPLY("AVDD2", "5-001a"),
- REGULATOR_SUPPLY("CPVDD", "5-001a"),
-};
-
-static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
- REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
- REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
-};
-
-static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
- .consumer_supplies = wm8994_fixed_voltage0_supplies,
-};
-
-static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
- .consumer_supplies = wm8994_fixed_voltage1_supplies,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
- .supply_name = "VCC_1.8V_PDA",
- .microvolts = 1800000,
- .gpio = -EINVAL,
- .init_data = &wm8994_fixed_voltage0_init_data,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
- .supply_name = "V_BAT",
- .microvolts = 3700000,
- .gpio = -EINVAL,
- .init_data = &wm8994_fixed_voltage1_init_data,
-};
-
-static struct platform_device wm8994_fixed_voltage0 = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &wm8994_fixed_voltage0_config,
- },
-};
-
-static struct platform_device wm8994_fixed_voltage1 = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &wm8994_fixed_voltage1_config,
- },
-};
-
-static struct regulator_consumer_supply wm8994_avdd1_supply =
- REGULATOR_SUPPLY("AVDD1", "5-001a");
-
-static struct regulator_consumer_supply wm8994_dcvdd_supply =
- REGULATOR_SUPPLY("DCVDD", "5-001a");
-
-static struct regulator_init_data wm8994_ldo1_data = {
- .constraints = {
- .name = "AVDD1_3.0V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &wm8994_avdd1_supply,
-};
-
-static struct regulator_init_data wm8994_ldo2_data = {
- .constraints = {
- .name = "DCVDD_1.0V",
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &wm8994_dcvdd_supply,
-};
-
-static struct wm8994_pdata wm8994_platform_data = {
- /* configure gpio1 function: 0x0001(Logic level input/output) */
- .gpio_defaults[0] = 0x0001,
- /* configure gpio3/4/5/7 function for AIF2 voice */
- .gpio_defaults[2] = 0x8100,
- .gpio_defaults[3] = 0x8100,
- .gpio_defaults[4] = 0x8100,
- .gpio_defaults[6] = 0x0100,
- /* configure gpio8/9/10/11 function for AIF3 BT */
- .gpio_defaults[7] = 0x8100,
- .gpio_defaults[8] = 0x0100,
- .gpio_defaults[9] = 0x0100,
- .gpio_defaults[10] = 0x0100,
- .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
- .ldo[1] = { 0, &wm8994_ldo2_data },
-};
-
-/* GPIO I2C PMIC */
-#define AP_I2C_GPIO_PMIC_BUS_4 4
-static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
- .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
- .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
-};
-
-static struct platform_device goni_i2c_gpio_pmic = {
- .name = "i2c-gpio",
- .id = AP_I2C_GPIO_PMIC_BUS_4,
- .dev = {
- .platform_data = &goni_i2c_gpio_pmic_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
- {
- /* 0xCC when SRAD = 0 */
- I2C_BOARD_INFO("max8998", 0xCC >> 1),
- .platform_data = &goni_max8998_pdata,
- },
-#endif
-};
-
-/* GPIO I2C AP 1.8V */
-#define AP_I2C_GPIO_BUS_5 5
-static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
- .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
- .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
-};
-
-static struct platform_device goni_i2c_gpio5 = {
- .name = "i2c-gpio",
- .id = AP_I2C_GPIO_BUS_5,
- .dev = {
- .platform_data = &goni_i2c_gpio5_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
- {
- /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
- I2C_BOARD_INFO("wm8994", 0x1a),
- .platform_data = &wm8994_platform_data,
- },
-};
-
-/* PMIC Power button */
-static struct gpio_keys_button goni_gpio_keys_table[] = {
- {
- .code = KEY_POWER,
- .gpio = S5PV210_GPH2(6),
- .desc = "gpio-keys: KEY_POWER",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data goni_gpio_keys_data = {
- .buttons = goni_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(goni_gpio_keys_table),
-};
-
-static struct platform_device goni_device_gpiokeys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &goni_gpio_keys_data,
- },
-};
-
-static void __init goni_pmic_init(void)
-{
- /* AP_PMIC_IRQ: EINT7 */
- s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
-
- /* nPower: EINT22 */
- s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
-}
-
-/* MoviNAND */
-static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-/* Wireless LAN */
-static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
- /* ext_cd_{init,cleanup} callbacks will be added later */
-};
-
-/* External Flash */
-#define GONI_EXT_FLASH_EN S5PV210_MP05(4)
-#define GONI_EXT_FLASH_CD S5PV210_GPH3(4)
-static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = GONI_EXT_FLASH_CD,
- .ext_cd_gpio_invert = 1,
-};
-
-static struct regulator_consumer_supply mmc2_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
-};
-
-static struct regulator_init_data mmc2_fixed_voltage_init_data = {
- .constraints = {
- .name = "V_TF_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies),
- .consumer_supplies = mmc2_supplies,
-};
-
-static struct fixed_voltage_config mmc2_fixed_voltage_config = {
- .supply_name = "EXT_FLASH_EN",
- .microvolts = 2800000,
- .gpio = GONI_EXT_FLASH_EN,
- .enable_high = true,
- .init_data = &mmc2_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc2_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = 2,
- .dev = {
- .platform_data = &mmc2_fixed_voltage_config,
- },
-};
-
-static void goni_setup_sdhci(void)
-{
- s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
- s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
- s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
-};
-
-/* Audio device */
-static struct platform_device goni_device_audio = {
- .name = "smdk-audio",
- .id = -1,
-};
-
-static struct platform_device *goni_devices[] __initdata = {
- &s3c_device_fb,
- &s5p_device_onenand,
- &goni_spi_gpio,
- &goni_i2c_gpio_pmic,
- &goni_i2c_gpio5,
- &goni_device_audio,
- &mmc2_fixed_voltage,
- &goni_device_gpiokeys,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &s5p_device_mixer,
- &s5p_device_sdo,
- &s3c_device_i2c0,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s5pv210_device_iis0,
- &s3c_device_usb_hsotg,
- &samsung_device_keypad,
- &s3c_device_i2c1,
- &s3c_device_i2c2,
- &wm8994_fixed_voltage0,
- &wm8994_fixed_voltage1,
-};
-
-static void __init goni_sound_init(void)
-{
- /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
- * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
- * because it needs 24MHz clock to operate WM8994 codec.
- */
- __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
-}
-
-static void __init goni_map_io(void)
-{
- s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init goni_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init goni_machine_init(void)
-{
- /* Radio: call before I2C 1 registeration */
- goni_radio_init();
-
- /* I2C0 */
- s3c_i2c0_set_platdata(NULL);
-
- /* I2C1 */
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
- /* TSP: call before I2C 2 registeration */
- goni_tsp_init();
-
- /* I2C2 */
- s3c_i2c2_set_platdata(&i2c2_data);
- i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
-
- /* PMIC */
- goni_pmic_init();
- i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
- ARRAY_SIZE(i2c_gpio_pmic_devs));
- /* SDHCI */
- goni_setup_sdhci();
-
- /* SOUND */
- goni_sound_init();
- i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
- ARRAY_SIZE(i2c_gpio5_devs));
-
- /* FB */
- s3c_fb_set_platdata(&goni_lcd_pdata);
-
- s3c_hsotg_set_platdata(&goni_hsotg_pdata);
-
- /* SPI */
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- /* KEYPAD */
- samsung_keypad_set_platdata(&keypad_data);
-
- platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
-}
-
-MACHINE_START(GONI, "GONI")
- /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pv210_init_irq,
- .map_io = goni_map_io,
- .init_machine = goni_machine_init,
- .init_time = samsung_timer_init,
- .reserve = &goni_reserve,
- .restart = s5pv210_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC110_UCON_DEFAULT,
- .ulcon = SMDKC110_ULCON_DEFAULT,
- .ufcon = SMDKC110_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC110_UCON_DEFAULT,
- .ulcon = SMDKC110_ULCON_DEFAULT,
- .ufcon = SMDKC110_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC110_UCON_DEFAULT,
- .ulcon = SMDKC110_ULCON_DEFAULT,
- .ufcon = SMDKC110_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC110_UCON_DEFAULT,
- .ulcon = SMDKC110_ULCON_DEFAULT,
- .ufcon = SMDKC110_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
- .setup_gpio = s5pv210_ide_setup_gpio,
-};
-
-static struct platform_device *smdkc110_devices[] __initdata = {
- &s5pv210_device_iis0,
- &s5pv210_device_ac97,
- &s5pv210_device_spdif,
- &s3c_device_cfcon,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_i2c2,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc_md,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
-};
-
-static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
- /* To Be Updated */
-};
-
-static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
- /* To Be Updated */
-};
-
-static void __init smdkc110_map_io(void)
-{
- s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdkc110_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkc110_machine_init(void)
-{
- s3c_pm_init();
-
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- s3c_i2c2_set_platdata(NULL);
- i2c_register_board_info(0, smdkc110_i2c_devs0,
- ARRAY_SIZE(smdkc110_i2c_devs0));
- i2c_register_board_info(1, smdkc110_i2c_devs1,
- ARRAY_SIZE(smdkc110_i2c_devs1));
- i2c_register_board_info(2, smdkc110_i2c_devs2,
- ARRAY_SIZE(smdkc110_i2c_devs2));
-
- s3c_ide_set_platdata(&smdkc110_ide_pdata);
-
- platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
-}
-
-MACHINE_START(SMDKC110, "SMDKC110")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pv210_init_irq,
- .map_io = smdkc110_map_io,
- .init_machine = smdkc110_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pv210_restart,
- .reserve = &smdkc110_reserve,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/device.h>
-#include <linux/dm9000.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-srom.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/keypad.h>
-#include <plat/pm.h>
-#include <plat/fb.h>
-#include <plat/samsung-time.h>
-#include <plat/backlight.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKV210_UCON_DEFAULT,
- .ulcon = SMDKV210_ULCON_DEFAULT,
- .ufcon = SMDKV210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKV210_UCON_DEFAULT,
- .ulcon = SMDKV210_ULCON_DEFAULT,
- .ufcon = SMDKV210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKV210_UCON_DEFAULT,
- .ulcon = SMDKV210_ULCON_DEFAULT,
- .ufcon = SMDKV210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKV210_UCON_DEFAULT,
- .ulcon = SMDKV210_ULCON_DEFAULT,
- .ufcon = SMDKV210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
- .setup_gpio = s5pv210_ide_setup_gpio,
-};
-
-static uint32_t smdkv210_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
- .keymap = smdkv210_keymap,
- .keymap_size = ARRAY_SIZE(smdkv210_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
- .keymap_data = &smdkv210_keymap_data,
- .rows = 8,
- .cols = 8,
-};
-
-static struct resource smdkv210_dm9000_resources[] = {
- [0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1),
- [1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1),
- [2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data smdkv210_dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
- .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
-};
-
-static struct platform_device smdkv210_dm9000 = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources),
- .resource = smdkv210_dm9000_resources,
- .dev = {
- .platform_data = &smdkv210_dm9000_platdata,
- },
-};
-
-static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(S5PV210_GPD0(3));
-#endif
-
- /* fire nRESET on power up */
- gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0");
-
- gpio_set_value(S5PV210_GPH0(6), 0);
- mdelay(10);
-
- gpio_set_value(S5PV210_GPH0(6), 1);
- mdelay(10);
-
- gpio_free(S5PV210_GPH0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(S5PV210_GPD0(3));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
- .set_power = smdkv210_lte480wv_set_power,
-};
-
-static struct platform_device smdkv210_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdkv210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkv210_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdkv210_lcd_timing = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
- .win[0] = &smdkv210_fb_win0,
- .vtiming = &smdkv210_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
-};
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
-
-static struct platform_device *smdkv210_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_cfcon,
- &s3c_device_fb,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_i2c2,
- &samsung_device_pwm,
- &s3c_device_rtc,
- &s3c_device_ts,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc_md,
- &s5p_device_jpeg,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &s5pv210_device_ac97,
- &s5pv210_device_iis0,
- &s5pv210_device_spdif,
- &samsung_asoc_idma,
- &samsung_device_keypad,
- &smdkv210_dm9000,
- &smdkv210_lcd_lte480wv,
-};
-
-static void __init smdkv210_dm9000_init(void)
-{
- unsigned int tmp;
-
- gpio_request(S5PV210_MP01(5), "nCS5");
- s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
- gpio_free(S5PV210_MP01(5));
-
- tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
- __raw_writel(tmp, S5P_SROM_BC5);
-
- tmp = __raw_readl(S5P_SROM_BW);
- tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
- tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
- __raw_writel(tmp, S5P_SROM_BW);
-}
-
-static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
- /* To Be Updated */
-};
-
-static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
- /* To Be Updated */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
- .no = S5PV210_GPD0(3),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv210_bl_data = {
- .pwm_id = 3,
- .pwm_period_ns = 1000,
- .enable_gpio = -1,
-};
-
-static void __init smdkv210_map_io(void)
-{
- s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
-}
-
-static void __init smdkv210_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkv210_machine_init(void)
-{
- s3c_pm_init();
-
- smdkv210_dm9000_init();
-
- samsung_keypad_set_platdata(&smdkv210_keypad_data);
- s3c24xx_ts_set_platdata(NULL);
-
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- s3c_i2c2_set_platdata(NULL);
- i2c_register_board_info(0, smdkv210_i2c_devs0,
- ARRAY_SIZE(smdkv210_i2c_devs0));
- i2c_register_board_info(1, smdkv210_i2c_devs1,
- ARRAY_SIZE(smdkv210_i2c_devs1));
- i2c_register_board_info(2, smdkv210_i2c_devs2,
- ARRAY_SIZE(smdkv210_i2c_devs2));
-
- s3c_ide_set_platdata(&smdkv210_ide_pdata);
-
- s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
-
- s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
-
- platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
-
- samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
-}
-
-MACHINE_START(SMDKV210, "SMDKV210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pv210_init_irq,
- .map_io = smdkv210_map_io,
- .init_machine = smdkv210_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pv210_restart,
- .reserve = &smdkv210_reserve,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/mach-torbreck.c
- *
- * Copyright (c) 2010 aESOP Community
- * http://www.aesop.or.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = TORBRECK_UCON_DEFAULT,
- .ulcon = TORBRECK_ULCON_DEFAULT,
- .ufcon = TORBRECK_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = TORBRECK_UCON_DEFAULT,
- .ulcon = TORBRECK_ULCON_DEFAULT,
- .ufcon = TORBRECK_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = TORBRECK_UCON_DEFAULT,
- .ulcon = TORBRECK_ULCON_DEFAULT,
- .ufcon = TORBRECK_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = TORBRECK_UCON_DEFAULT,
- .ulcon = TORBRECK_ULCON_DEFAULT,
- .ufcon = TORBRECK_UFCON_DEFAULT,
- },
-};
-
-static struct platform_device *torbreck_devices[] __initdata = {
- &s5pv210_device_iis0,
- &s3c_device_cfcon,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_i2c2,
- &s3c_device_rtc,
- &s3c_device_wdt,
-};
-
-static struct i2c_board_info torbreck_i2c_devs0[] __initdata = {
- /* To Be Updated */
-};
-
-static struct i2c_board_info torbreck_i2c_devs1[] __initdata = {
- /* To Be Updated */
-};
-
-static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
- /* To Be Updated */
-};
-
-static void __init torbreck_map_io(void)
-{
- s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init torbreck_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- s3c_i2c2_set_platdata(NULL);
- i2c_register_board_info(0, torbreck_i2c_devs0,
- ARRAY_SIZE(torbreck_i2c_devs0));
- i2c_register_board_info(1, torbreck_i2c_devs1,
- ARRAY_SIZE(torbreck_i2c_devs1));
- i2c_register_board_info(2, torbreck_i2c_devs2,
- ARRAY_SIZE(torbreck_i2c_devs2));
-
- platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices));
-}
-
-MACHINE_START(TORBRECK, "TORBRECK")
- /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
- .atag_offset = 0x100,
- .init_irq = s5pv210_init_irq,
- .map_io = torbreck_map_io,
- .init_machine = torbreck_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pv210_restart,
-MACHINE_END
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
-static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
-{
- pm_cpu_prep = s5pv210_pm_prepare;
- pm_cpu_sleep = s5pv210_cpu_suspend;
-
- return 0;
-}
-
-static struct subsys_interface s5pv210_pm_interface = {
- .name = "s5pv210_pm",
- .subsys = &s5pv210_subsys,
- .add_dev = s5pv210_pm_add,
-};
-
-static __init int s5pv210_pm_drvinit(void)
-{
- return subsys_interface_register(&s5pv210_pm_interface);
-}
-arch_initcall(s5pv210_pm_drvinit);
-
static void s5pv210_pm_resume(void)
{
u32 tmp;
static __init int s5pv210_pm_syscore_init(void)
{
register_syscore_ops(&s5pv210_pm_syscore_ops);
+
+ pm_cpu_prep = s5pv210_pm_prepare;
+ pm_cpu_sleep = s5pv210_cpu_suspend;
+
return 0;
}
arch_initcall(s5pv210_pm_syscore_init);
+++ /dev/null
-/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base s5pv210 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-
- for (; nr > 0; nr--, base++)
- s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-
-void s5pv210_fb_gpio_setup_24bpp(void)
-{
- s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8);
- s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8);
- s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8);
- s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4);
-
- /* Set DISPLAY_CONTROL register for Display path selection.
- *
- * ouput | RGB | I80 | ITU
- * -----------------------------------
- * 00 | MIE | FIMD | FIMD
- * 01 | MDNIE | MDNIE | FIMD
- * 10 | FIMD | FIMD | FIMD
- * 11 | FIMD | FIMD | FIMD
- */
- writel(0x2, S5P_MDNIE_SEL);
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5PV210 camera interface GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/camport.h>
-
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id)
-{
- u32 gpio8, gpio5;
- int ret;
-
- switch (id) {
- case S5P_CAMPORT_A:
- gpio8 = S5PV210_GPE0(0);
- gpio5 = S5PV210_GPE1(0);
- break;
-
- case S5P_CAMPORT_B:
- gpio8 = S5PV210_GPJ0(0);
- gpio5 = S5PV210_GPJ1(0);
- break;
-
- default:
- WARN(1, "Wrong camport id: %d\n", id);
- return -EINVAL;
- }
-
- ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_UP);
- if (ret)
- return ret;
-
- return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_UP);
-}
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ /*
+ * FIXME: Used only by legacy code that is not used anymore,
+ * but still compiled in, until all dependencies are removed.
+ */
}
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C1 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C2 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c2_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PV210 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-
-static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
- for (; nr > 0; nr--, base++)
- s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pv210_ide_setup_gpio(void)
-{
- /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
- s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8);
-
- /* CF_Data[0 - 7] */
- s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8);
-
- /* CF_Data[8 - 15] */
- s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8);
-
- /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-s5pv210/setup-keypad.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3));
-
- /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3));
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG0/GPG1 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2));
-
- switch (width) {
- case 8:
- /* GPG1[3:6] special-function 3 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
- case 4:
- /* GPG0[3:6] special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
- default:
- break;
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG1[0:1] pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2));
-
- /* Data pin GPG1[3:6] to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG2[0:1] pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2));
-
- switch (width) {
- case 8:
- /* Data pin GPG3[3:6] to special-function 3 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3));
- case 4:
- /* Data pin GPG2[3:6] to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2));
- default:
- break;
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG3[0:1] pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2));
-
- /* Data pin GPG3[3:6] to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
- }
-}
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PV210_GPB(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PV210_GPB(6), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundationr
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-usb-hsotg-phy.h>
-#include <plat/usb-phy.h>
-
-#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
-#define S5PV210_USB_PHY0_EN (1 << 0)
-#define S5PV210_USB_PHY1_EN (1 << 1)
-
-static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
-{
- struct clk *xusbxti;
- u32 phyclk;
-
- writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN,
- S5PV210_USB_PHY_CON);
-
- /* set clock frequency for PLL */
- phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
-
- xusbxti = clk_get(&pdev->dev, "xusbxti");
- if (xusbxti && !IS_ERR(xusbxti)) {
- switch (clk_get_rate(xusbxti)) {
- case 12 * MHZ:
- phyclk |= S3C_PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- phyclk |= S3C_PHYCLK_CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- break;
- }
- clk_put(xusbxti);
- }
-
- /* TODO: select external clock/oscillator */
- writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
-
- /* set to normal OTG PHY */
- writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
- mdelay(1);
-
- /* reset OTG PHY and Link */
- writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
- S3C_RSTCON);
- udelay(20); /* at-least 10uS */
- writel(0, S3C_RSTCON);
-
- return 0;
-}
-
-static int s5pv210_usb_otgphy_exit(struct platform_device *pdev)
-{
- writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
- S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
-
- writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN,
- S5PV210_USB_PHY_CON);
-
- return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
- if (type == USB_PHY_TYPE_DEVICE)
- return s5pv210_usb_otgphy_init(pdev);
-
- return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
- if (type == USB_PHY_TYPE_DEVICE)
- return s5pv210_usb_otgphy_exit(pdev);
-
- return -EINVAL;
-}
extern struct bus_type s3c2442_subsys;
extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
-extern struct bus_type s5pv210_subsys;
extern void (*s5pc1xx_idle)(void);
projects / cascardo / linux.git / commitdiff