If you have a AnalogicTech AAT2870 say Y to enable the
backlight driver.
-config BACKLIGHT_LM3630
- tristate "Backlight Driver for LM3630"
+config BACKLIGHT_LM3630A
+ tristate "Backlight Driver for LM3630A"
depends on BACKLIGHT_CLASS_DEVICE && I2C
select REGMAP_I2C
help
- This supports TI LM3630 Backlight Driver
+ This supports TI LM3630A Backlight Driver
config BACKLIGHT_LM3639
tristate "Backlight Driver for LM3639"
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o
-obj-$(CONFIG_BACKLIGHT_LM3630) += lm3630_bl.o
+obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o
obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
+++ /dev/null
-/*
-* Simple driver for Texas Instruments LM3630 Backlight driver chip
-* Copyright (C) 2012 Texas Instruments
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*
-*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/backlight.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-#include <linux/interrupt.h>
-#include <linux/regmap.h>
-#include <linux/platform_data/lm3630_bl.h>
-
-#define REG_CTRL 0x00
-#define REG_CONFIG 0x01
-#define REG_BRT_A 0x03
-#define REG_BRT_B 0x04
-#define REG_INT_STATUS 0x09
-#define REG_INT_EN 0x0A
-#define REG_FAULT 0x0B
-#define REG_PWM_OUTLOW 0x12
-#define REG_PWM_OUTHIGH 0x13
-#define REG_MAX 0x1F
-
-#define INT_DEBOUNCE_MSEC 10
-
-enum lm3630_leds {
- BLED_ALL = 0,
- BLED_1,
- BLED_2
-};
-
-static const char * const bled_name[] = {
- [BLED_ALL] = "lm3630_bled", /*Bank1 controls all string */
- [BLED_1] = "lm3630_bled1", /*Bank1 controls bled1 */
- [BLED_2] = "lm3630_bled2", /*Bank1 or 2 controls bled2 */
-};
-
-struct lm3630_chip_data {
- struct device *dev;
- struct delayed_work work;
- int irq;
- struct workqueue_struct *irqthread;
- struct lm3630_platform_data *pdata;
- struct backlight_device *bled1;
- struct backlight_device *bled2;
- struct regmap *regmap;
-};
-
-/* initialize chip */
-static int lm3630_chip_init(struct lm3630_chip_data *pchip)
-{
- int ret;
- unsigned int reg_val;
- struct lm3630_platform_data *pdata = pchip->pdata;
-
- /*pwm control */
- reg_val = ((pdata->pwm_active & 0x01) << 2) | (pdata->pwm_ctrl & 0x03);
- ret = regmap_update_bits(pchip->regmap, REG_CONFIG, 0x07, reg_val);
- if (ret < 0)
- goto out;
-
- /* bank control */
- reg_val = ((pdata->bank_b_ctrl & 0x01) << 1) |
- (pdata->bank_a_ctrl & 0x07);
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x07, reg_val);
- if (ret < 0)
- goto out;
-
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
- if (ret < 0)
- goto out;
-
- /* set initial brightness */
- if (pdata->bank_a_ctrl != BANK_A_CTRL_DISABLE) {
- ret = regmap_write(pchip->regmap,
- REG_BRT_A, pdata->init_brt_led1);
- if (ret < 0)
- goto out;
- }
-
- if (pdata->bank_b_ctrl != BANK_B_CTRL_DISABLE) {
- ret = regmap_write(pchip->regmap,
- REG_BRT_B, pdata->init_brt_led2);
- if (ret < 0)
- goto out;
- }
- return ret;
-
-out:
- dev_err(pchip->dev, "i2c failed to access register\n");
- return ret;
-}
-
-/* interrupt handling */
-static void lm3630_delayed_func(struct work_struct *work)
-{
- int ret;
- unsigned int reg_val;
- struct lm3630_chip_data *pchip;
-
- pchip = container_of(work, struct lm3630_chip_data, work.work);
-
- ret = regmap_read(pchip->regmap, REG_INT_STATUS, ®_val);
- if (ret < 0) {
- dev_err(pchip->dev,
- "i2c failed to access REG_INT_STATUS Register\n");
- return;
- }
-
- dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", reg_val);
-}
-
-static irqreturn_t lm3630_isr_func(int irq, void *chip)
-{
- int ret;
- struct lm3630_chip_data *pchip = chip;
- unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
-
- queue_delayed_work(pchip->irqthread, &pchip->work, delay);
-
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
- if (ret < 0)
- goto out;
-
- return IRQ_HANDLED;
-out:
- dev_err(pchip->dev, "i2c failed to access register\n");
- return IRQ_HANDLED;
-}
-
-static int lm3630_intr_config(struct lm3630_chip_data *pchip)
-{
- INIT_DELAYED_WORK(&pchip->work, lm3630_delayed_func);
- pchip->irqthread = create_singlethread_workqueue("lm3630-irqthd");
- if (!pchip->irqthread) {
- dev_err(pchip->dev, "create irq thread fail...\n");
- return -1;
- }
- if (request_threaded_irq
- (pchip->irq, NULL, lm3630_isr_func,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630_irq", pchip)) {
- dev_err(pchip->dev, "request threaded irq fail..\n");
- return -1;
- }
- return 0;
-}
-
-static bool
-set_intensity(struct backlight_device *bl, struct lm3630_chip_data *pchip)
-{
- if (!pchip->pdata->pwm_set_intensity)
- return false;
- pchip->pdata->pwm_set_intensity(bl->props.brightness - 1,
- pchip->pdata->pwm_period);
- return true;
-}
-
-/* update and get brightness */
-static int lm3630_bank_a_update_status(struct backlight_device *bl)
-{
- int ret;
- struct lm3630_chip_data *pchip = bl_get_data(bl);
- enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
- /* brightness 0 means disable */
- if (!bl->props.brightness) {
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x04, 0x00);
- if (ret < 0)
- goto out;
- return bl->props.brightness;
- }
-
- /* pwm control */
- if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
- if (!set_intensity(bl, pchip))
- dev_err(pchip->dev, "No pwm control func. in plat-data\n");
- } else {
-
- /* i2c control */
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
- if (ret < 0)
- goto out;
- mdelay(1);
- ret = regmap_write(pchip->regmap,
- REG_BRT_A, bl->props.brightness - 1);
- if (ret < 0)
- goto out;
- }
- return bl->props.brightness;
-out:
- dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
- return bl->props.brightness;
-}
-
-static int lm3630_bank_a_get_brightness(struct backlight_device *bl)
-{
- unsigned int reg_val;
- int brightness, ret;
- struct lm3630_chip_data *pchip = bl_get_data(bl);
- enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
- if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
- ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, ®_val);
- if (ret < 0)
- goto out;
- brightness = reg_val & 0x01;
- ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, ®_val);
- if (ret < 0)
- goto out;
- brightness = ((brightness << 8) | reg_val) + 1;
- } else {
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
- if (ret < 0)
- goto out;
- mdelay(1);
- ret = regmap_read(pchip->regmap, REG_BRT_A, ®_val);
- if (ret < 0)
- goto out;
- brightness = reg_val + 1;
- }
- bl->props.brightness = brightness;
- return bl->props.brightness;
-out:
- dev_err(pchip->dev, "i2c failed to access register\n");
- return 0;
-}
-
-static const struct backlight_ops lm3630_bank_a_ops = {
- .options = BL_CORE_SUSPENDRESUME,
- .update_status = lm3630_bank_a_update_status,
- .get_brightness = lm3630_bank_a_get_brightness,
-};
-
-static int lm3630_bank_b_update_status(struct backlight_device *bl)
-{
- int ret;
- struct lm3630_chip_data *pchip = bl_get_data(bl);
- enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
- if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
- if (!set_intensity(bl, pchip))
- dev_err(pchip->dev,
- "no pwm control func. in plat-data\n");
- } else {
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
- if (ret < 0)
- goto out;
- mdelay(1);
- ret = regmap_write(pchip->regmap,
- REG_BRT_B, bl->props.brightness - 1);
- }
- return bl->props.brightness;
-out:
- dev_err(pchip->dev, "i2c failed to access register\n");
- return bl->props.brightness;
-}
-
-static int lm3630_bank_b_get_brightness(struct backlight_device *bl)
-{
- unsigned int reg_val;
- int brightness, ret;
- struct lm3630_chip_data *pchip = bl_get_data(bl);
- enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
- if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
- ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, ®_val);
- if (ret < 0)
- goto out;
- brightness = reg_val & 0x01;
- ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, ®_val);
- if (ret < 0)
- goto out;
- brightness = ((brightness << 8) | reg_val) + 1;
- } else {
- ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
- if (ret < 0)
- goto out;
- mdelay(1);
- ret = regmap_read(pchip->regmap, REG_BRT_B, ®_val);
- if (ret < 0)
- goto out;
- brightness = reg_val + 1;
- }
- bl->props.brightness = brightness;
-
- return bl->props.brightness;
-out:
- dev_err(pchip->dev, "i2c failed to access register\n");
- return bl->props.brightness;
-}
-
-static const struct backlight_ops lm3630_bank_b_ops = {
- .options = BL_CORE_SUSPENDRESUME,
- .update_status = lm3630_bank_b_update_status,
- .get_brightness = lm3630_bank_b_get_brightness,
-};
-
-static int lm3630_backlight_register(struct lm3630_chip_data *pchip,
- enum lm3630_leds ledno)
-{
- const char *name = bled_name[ledno];
- struct backlight_properties props;
- struct lm3630_platform_data *pdata = pchip->pdata;
-
- props.type = BACKLIGHT_RAW;
- switch (ledno) {
- case BLED_1:
- case BLED_ALL:
- props.brightness = pdata->init_brt_led1;
- props.max_brightness = pdata->max_brt_led1;
- pchip->bled1 =
- backlight_device_register(name, pchip->dev, pchip,
- &lm3630_bank_a_ops, &props);
- if (IS_ERR(pchip->bled1))
- return PTR_ERR(pchip->bled1);
- break;
- case BLED_2:
- props.brightness = pdata->init_brt_led2;
- props.max_brightness = pdata->max_brt_led2;
- pchip->bled2 =
- backlight_device_register(name, pchip->dev, pchip,
- &lm3630_bank_b_ops, &props);
- if (IS_ERR(pchip->bled2))
- return PTR_ERR(pchip->bled2);
- break;
- }
- return 0;
-}
-
-static void lm3630_backlight_unregister(struct lm3630_chip_data *pchip)
-{
- if (pchip->bled1)
- backlight_device_unregister(pchip->bled1);
- if (pchip->bled2)
- backlight_device_unregister(pchip->bled2);
-}
-
-static const struct regmap_config lm3630_regmap = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = REG_MAX,
-};
-
-static int lm3630_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct lm3630_platform_data *pdata = client->dev.platform_data;
- struct lm3630_chip_data *pchip;
- int ret;
-
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- dev_err(&client->dev, "fail : i2c functionality check...\n");
- return -EOPNOTSUPP;
- }
-
- if (pdata == NULL) {
- dev_err(&client->dev, "fail : no platform data.\n");
- return -ENODATA;
- }
-
- pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630_chip_data),
- GFP_KERNEL);
- if (!pchip)
- return -ENOMEM;
- pchip->pdata = pdata;
- pchip->dev = &client->dev;
-
- pchip->regmap = devm_regmap_init_i2c(client, &lm3630_regmap);
- if (IS_ERR(pchip->regmap)) {
- ret = PTR_ERR(pchip->regmap);
- dev_err(&client->dev, "fail : allocate register map: %d\n",
- ret);
- return ret;
- }
- i2c_set_clientdata(client, pchip);
-
- /* chip initialize */
- ret = lm3630_chip_init(pchip);
- if (ret < 0) {
- dev_err(&client->dev, "fail : init chip\n");
- goto err_chip_init;
- }
-
- switch (pdata->bank_a_ctrl) {
- case BANK_A_CTRL_ALL:
- ret = lm3630_backlight_register(pchip, BLED_ALL);
- pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
- break;
- case BANK_A_CTRL_LED1:
- ret = lm3630_backlight_register(pchip, BLED_1);
- break;
- case BANK_A_CTRL_LED2:
- ret = lm3630_backlight_register(pchip, BLED_2);
- pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
- break;
- default:
- break;
- }
-
- if (ret < 0)
- goto err_bl_reg;
-
- if (pdata->bank_b_ctrl && pchip->bled2 == NULL) {
- ret = lm3630_backlight_register(pchip, BLED_2);
- if (ret < 0)
- goto err_bl_reg;
- }
-
- /* interrupt enable : irq 0 is not allowed for lm3630 */
- pchip->irq = client->irq;
- if (pchip->irq)
- lm3630_intr_config(pchip);
-
- dev_info(&client->dev, "LM3630 backlight register OK.\n");
- return 0;
-
-err_bl_reg:
- dev_err(&client->dev, "fail : backlight register.\n");
- lm3630_backlight_unregister(pchip);
-err_chip_init:
- return ret;
-}
-
-static int lm3630_remove(struct i2c_client *client)
-{
- int ret;
- struct lm3630_chip_data *pchip = i2c_get_clientdata(client);
-
- ret = regmap_write(pchip->regmap, REG_BRT_A, 0);
- if (ret < 0)
- dev_err(pchip->dev, "i2c failed to access register\n");
-
- ret = regmap_write(pchip->regmap, REG_BRT_B, 0);
- if (ret < 0)
- dev_err(pchip->dev, "i2c failed to access register\n");
-
- lm3630_backlight_unregister(pchip);
- if (pchip->irq) {
- free_irq(pchip->irq, pchip);
- flush_workqueue(pchip->irqthread);
- destroy_workqueue(pchip->irqthread);
- }
- return 0;
-}
-
-static const struct i2c_device_id lm3630_id[] = {
- {LM3630_NAME, 0},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, lm3630_id);
-
-static struct i2c_driver lm3630_i2c_driver = {
- .driver = {
- .name = LM3630_NAME,
- },
- .probe = lm3630_probe,
- .remove = lm3630_remove,
- .id_table = lm3630_id,
-};
-
-module_i2c_driver(lm3630_i2c_driver);
-
-MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630");
-MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
-MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
-MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+* Simple driver for Texas Instruments LM3630A Backlight driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+*/
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/pwm.h>
+#include <linux/platform_data/lm3630a_bl.h>
+
+#define REG_CTRL 0x00
+#define REG_BOOST 0x02
+#define REG_CONFIG 0x01
+#define REG_BRT_A 0x03
+#define REG_BRT_B 0x04
+#define REG_I_A 0x05
+#define REG_I_B 0x06
+#define REG_INT_STATUS 0x09
+#define REG_INT_EN 0x0A
+#define REG_FAULT 0x0B
+#define REG_PWM_OUTLOW 0x12
+#define REG_PWM_OUTHIGH 0x13
+#define REG_MAX 0x1F
+
+#define INT_DEBOUNCE_MSEC 10
+struct lm3630a_chip {
+ struct device *dev;
+ struct delayed_work work;
+
+ int irq;
+ struct workqueue_struct *irqthread;
+ struct lm3630a_platform_data *pdata;
+ struct backlight_device *bleda;
+ struct backlight_device *bledb;
+ struct regmap *regmap;
+ struct pwm_device *pwmd;
+};
+
+/* i2c access */
+static int lm3630a_read(struct lm3630a_chip *pchip, unsigned int reg)
+{
+ int rval;
+ unsigned int reg_val;
+
+ rval = regmap_read(pchip->regmap, reg, ®_val);
+ if (rval < 0)
+ return rval;
+ return reg_val & 0xFF;
+}
+
+static int lm3630a_write(struct lm3630a_chip *pchip,
+ unsigned int reg, unsigned int data)
+{
+ return regmap_write(pchip->regmap, reg, data);
+}
+
+static int lm3630a_update(struct lm3630a_chip *pchip,
+ unsigned int reg, unsigned int mask,
+ unsigned int data)
+{
+ return regmap_update_bits(pchip->regmap, reg, mask, data);
+}
+
+/* initialize chip */
+static int lm3630a_chip_init(struct lm3630a_chip *pchip)
+{
+ int rval;
+ struct lm3630a_platform_data *pdata = pchip->pdata;
+
+ usleep_range(1000, 2000);
+ /* set Filter Strength Register */
+ rval = lm3630a_write(pchip, 0x50, 0x03);
+ /* set Cofig. register */
+ rval |= lm3630a_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl);
+ /* set boost control */
+ rval |= lm3630a_write(pchip, REG_BOOST, 0x38);
+ /* set current A */
+ rval |= lm3630a_update(pchip, REG_I_A, 0x1F, 0x1F);
+ /* set current B */
+ rval |= lm3630a_write(pchip, REG_I_B, 0x1F);
+ /* set control */
+ rval |=
+ lm3630a_write(pchip, REG_CTRL, pdata->leda_ctrl | pdata->ledb_ctrl);
+ usleep_range(1000, 2000);
+ /* set brightness A and B */
+ rval |= lm3630a_write(pchip, REG_BRT_A, pdata->leda_init_brt);
+ rval |= lm3630a_write(pchip, REG_BRT_B, pdata->ledb_init_brt);
+
+ if (rval < 0)
+ dev_err(pchip->dev, "i2c failed to access register\n");
+ return rval;
+}
+
+/* interrupt handling */
+static void lm3630a_delayed_func(struct work_struct *work)
+{
+ unsigned int rval;
+ struct lm3630a_chip *pchip;
+
+ pchip = container_of(work, struct lm3630a_chip, work.work);
+
+ rval = lm3630a_read(pchip, REG_INT_STATUS);
+ if (rval < 0) {
+ dev_err(pchip->dev,
+ "i2c failed to access REG_INT_STATUS Register\n");
+ return;
+ }
+
+ dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval);
+}
+
+static irqreturn_t lm3630a_isr_func(int irq, void *chip)
+{
+ int rval;
+ struct lm3630a_chip *pchip = chip;
+ unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
+
+ queue_delayed_work(pchip->irqthread, &pchip->work, delay);
+
+ rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
+ if (rval < 0) {
+ dev_err(pchip->dev, "i2c failed to access register\n");
+ return IRQ_NONE;
+ }
+ return IRQ_HANDLED;
+}
+
+static int lm3630a_intr_config(struct lm3630a_chip *pchip)
+{
+ int rval;
+
+ rval = lm3630a_write(pchip, REG_INT_EN, 0x87);
+ if (rval < 0)
+ return rval;
+
+ INIT_DELAYED_WORK(&pchip->work, lm3630a_delayed_func);
+ pchip->irqthread = create_singlethread_workqueue("lm3630a-irqthd");
+ if (!pchip->irqthread) {
+ dev_err(pchip->dev, "create irq thread fail\n");
+ return -ENOMEM;
+ }
+ if (request_threaded_irq
+ (pchip->irq, NULL, lm3630a_isr_func,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630a_irq", pchip)) {
+ dev_err(pchip->dev, "request threaded irq fail\n");
+ return -ENOMEM;
+ }
+ return rval;
+}
+
+static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
+{
+ unsigned int period = pwm_get_period(pchip->pwmd);
+ unsigned int duty = br * period / br_max;
+
+ pwm_config(pchip->pwmd, duty, period);
+ if (duty)
+ pwm_enable(pchip->pwmd);
+ else
+ pwm_disable(pchip->pwmd);
+}
+
+/* update and get brightness */
+static int lm3630a_bank_a_update_status(struct backlight_device *bl)
+{
+ int ret;
+ struct lm3630a_chip *pchip = bl_get_data(bl);
+ enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+ /* pwm control */
+ if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
+ lm3630a_pwm_ctrl(pchip, bl->props.brightness,
+ bl->props.max_brightness);
+ return bl->props.brightness;
+ }
+
+ /* disable sleep */
+ ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
+ if (ret < 0)
+ goto out_i2c_err;
+ usleep_range(1000, 2000);
+ /* minimum brightness is 0x04 */
+ ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness);
+ if (bl->props.brightness < 0x4)
+ ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0);
+ else
+ ret |= lm3630a_update(pchip, REG_CTRL,
+ LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
+ if (ret < 0)
+ goto out_i2c_err;
+ return bl->props.brightness;
+
+out_i2c_err:
+ dev_err(pchip->dev, "i2c failed to access\n");
+ return bl->props.brightness;
+}
+
+static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
+{
+ int brightness, rval;
+ struct lm3630a_chip *pchip = bl_get_data(bl);
+ enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+ if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
+ rval = lm3630a_read(pchip, REG_PWM_OUTHIGH);
+ if (rval < 0)
+ goto out_i2c_err;
+ brightness = (rval & 0x01) << 8;
+ rval = lm3630a_read(pchip, REG_PWM_OUTLOW);
+ if (rval < 0)
+ goto out_i2c_err;
+ brightness |= rval;
+ goto out;
+ }
+
+ /* disable sleep */
+ rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
+ if (rval < 0)
+ goto out_i2c_err;
+ usleep_range(1000, 2000);
+ rval = lm3630a_read(pchip, REG_BRT_A);
+ if (rval < 0)
+ goto out_i2c_err;
+ brightness = rval;
+
+out:
+ bl->props.brightness = brightness;
+ return bl->props.brightness;
+out_i2c_err:
+ dev_err(pchip->dev, "i2c failed to access register\n");
+ return 0;
+}
+
+static const struct backlight_ops lm3630a_bank_a_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = lm3630a_bank_a_update_status,
+ .get_brightness = lm3630a_bank_a_get_brightness,
+};
+
+/* update and get brightness */
+static int lm3630a_bank_b_update_status(struct backlight_device *bl)
+{
+ int ret;
+ struct lm3630a_chip *pchip = bl_get_data(bl);
+ enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+ /* pwm control */
+ if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
+ lm3630a_pwm_ctrl(pchip, bl->props.brightness,
+ bl->props.max_brightness);
+ return bl->props.brightness;
+ }
+
+ /* disable sleep */
+ ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
+ if (ret < 0)
+ goto out_i2c_err;
+ usleep_range(1000, 2000);
+ /* minimum brightness is 0x04 */
+ ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness);
+ if (bl->props.brightness < 0x4)
+ ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0);
+ else
+ ret |= lm3630a_update(pchip, REG_CTRL,
+ LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
+ if (ret < 0)
+ goto out_i2c_err;
+ return bl->props.brightness;
+
+out_i2c_err:
+ dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
+ return bl->props.brightness;
+}
+
+static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
+{
+ int brightness, rval;
+ struct lm3630a_chip *pchip = bl_get_data(bl);
+ enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+ if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
+ rval = lm3630a_read(pchip, REG_PWM_OUTHIGH);
+ if (rval < 0)
+ goto out_i2c_err;
+ brightness = (rval & 0x01) << 8;
+ rval = lm3630a_read(pchip, REG_PWM_OUTLOW);
+ if (rval < 0)
+ goto out_i2c_err;
+ brightness |= rval;
+ goto out;
+ }
+
+ /* disable sleep */
+ rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
+ if (rval < 0)
+ goto out_i2c_err;
+ usleep_range(1000, 2000);
+ rval = lm3630a_read(pchip, REG_BRT_B);
+ if (rval < 0)
+ goto out_i2c_err;
+ brightness = rval;
+
+out:
+ bl->props.brightness = brightness;
+ return bl->props.brightness;
+out_i2c_err:
+ dev_err(pchip->dev, "i2c failed to access register\n");
+ return 0;
+}
+
+static const struct backlight_ops lm3630a_bank_b_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = lm3630a_bank_b_update_status,
+ .get_brightness = lm3630a_bank_b_get_brightness,
+};
+
+static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
+{
+ struct backlight_properties props;
+ struct lm3630a_platform_data *pdata = pchip->pdata;
+
+ props.type = BACKLIGHT_RAW;
+ if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
+ props.brightness = pdata->leda_init_brt;
+ props.max_brightness = pdata->leda_max_brt;
+ pchip->bleda =
+ devm_backlight_device_register(pchip->dev, "lm3630a_leda",
+ pchip->dev, pchip,
+ &lm3630a_bank_a_ops, &props);
+ if (IS_ERR(pchip->bleda))
+ return PTR_ERR(pchip->bleda);
+ }
+
+ if ((pdata->ledb_ctrl != LM3630A_LEDB_DISABLE) &&
+ (pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) {
+ props.brightness = pdata->ledb_init_brt;
+ props.max_brightness = pdata->ledb_max_brt;
+ pchip->bledb =
+ devm_backlight_device_register(pchip->dev, "lm3630a_ledb",
+ pchip->dev, pchip,
+ &lm3630a_bank_b_ops, &props);
+ if (IS_ERR(pchip->bledb))
+ return PTR_ERR(pchip->bledb);
+ }
+ return 0;
+}
+
+static const struct regmap_config lm3630a_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = REG_MAX,
+};
+
+static int lm3630a_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm3630a_platform_data *pdata = client->dev.platform_data;
+ struct lm3630a_chip *pchip;
+ int rval;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "fail : i2c functionality check\n");
+ return -EOPNOTSUPP;
+ }
+
+ pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630a_chip),
+ GFP_KERNEL);
+ if (!pchip)
+ return -ENOMEM;
+ pchip->dev = &client->dev;
+
+ pchip->regmap = devm_regmap_init_i2c(client, &lm3630a_regmap);
+ if (IS_ERR(pchip->regmap)) {
+ rval = PTR_ERR(pchip->regmap);
+ dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval);
+ return rval;
+ }
+
+ i2c_set_clientdata(client, pchip);
+ if (pdata == NULL) {
+ pchip->pdata = devm_kzalloc(pchip->dev,
+ sizeof(struct
+ lm3630a_platform_data),
+ GFP_KERNEL);
+ if (pchip->pdata == NULL)
+ return -ENOMEM;
+ /* default values */
+ pchip->pdata->leda_ctrl = LM3630A_LEDA_ENABLE;
+ pchip->pdata->ledb_ctrl = LM3630A_LEDB_ENABLE;
+ pchip->pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS;
+ pchip->pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS;
+ pchip->pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS;
+ pchip->pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS;
+ } else {
+ pchip->pdata = pdata;
+ }
+ /* chip initialize */
+ rval = lm3630a_chip_init(pchip);
+ if (rval < 0) {
+ dev_err(&client->dev, "fail : init chip\n");
+ return rval;
+ }
+ /* backlight register */
+ rval = lm3630a_backlight_register(pchip);
+ if (rval < 0) {
+ dev_err(&client->dev, "fail : backlight register.\n");
+ return rval;
+ }
+ /* pwm */
+ if (pdata->pwm_ctrl != LM3630A_PWM_DISABLE) {
+ pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630a-pwm");
+ if (IS_ERR(pchip->pwmd)) {
+ dev_err(&client->dev, "fail : get pwm device\n");
+ return PTR_ERR(pchip->pwmd);
+ }
+ }
+ pchip->pwmd->period = pdata->pwm_period;
+
+ /* interrupt enable : irq 0 is not allowed */
+ pchip->irq = client->irq;
+ if (pchip->irq) {
+ rval = lm3630a_intr_config(pchip);
+ if (rval < 0)
+ return rval;
+ }
+ dev_info(&client->dev, "LM3630A backlight register OK.\n");
+ return 0;
+}
+
+static int lm3630a_remove(struct i2c_client *client)
+{
+ int rval;
+ struct lm3630a_chip *pchip = i2c_get_clientdata(client);
+
+ rval = lm3630a_write(pchip, REG_BRT_A, 0);
+ if (rval < 0)
+ dev_err(pchip->dev, "i2c failed to access register\n");
+
+ rval = lm3630a_write(pchip, REG_BRT_B, 0);
+ if (rval < 0)
+ dev_err(pchip->dev, "i2c failed to access register\n");
+
+ if (pchip->irq) {
+ free_irq(pchip->irq, pchip);
+ flush_workqueue(pchip->irqthread);
+ destroy_workqueue(pchip->irqthread);
+ }
+ return 0;
+}
+
+static const struct i2c_device_id lm3630a_id[] = {
+ {LM3630A_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3630a_id);
+
+static struct i2c_driver lm3630a_i2c_driver = {
+ .driver = {
+ .name = LM3630A_NAME,
+ },
+ .probe = lm3630a_probe,
+ .remove = lm3630a_remove,
+ .id_table = lm3630a_id,
+};
+
+module_i2c_driver(lm3630a_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630A");
+MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("LDD MLP <ldd-mlp@list.ti.com>");
+MODULE_LICENSE("GPL v2");
+++ /dev/null
-/*
-* Simple driver for Texas Instruments LM3630 LED Flash driver chip
-* Copyright (C) 2012 Texas Instruments
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*
-*/
-
-#ifndef __LINUX_LM3630_H
-#define __LINUX_LM3630_H
-
-#define LM3630_NAME "lm3630_bl"
-
-enum lm3630_pwm_ctrl {
- PWM_CTRL_DISABLE = 0,
- PWM_CTRL_BANK_A,
- PWM_CTRL_BANK_B,
- PWM_CTRL_BANK_ALL,
-};
-
-enum lm3630_pwm_active {
- PWM_ACTIVE_HIGH = 0,
- PWM_ACTIVE_LOW,
-};
-
-enum lm3630_bank_a_ctrl {
- BANK_A_CTRL_DISABLE = 0x0,
- BANK_A_CTRL_LED1 = 0x4,
- BANK_A_CTRL_LED2 = 0x1,
- BANK_A_CTRL_ALL = 0x5,
-};
-
-enum lm3630_bank_b_ctrl {
- BANK_B_CTRL_DISABLE = 0,
- BANK_B_CTRL_LED2,
-};
-
-struct lm3630_platform_data {
-
- /* maximum brightness */
- int max_brt_led1;
- int max_brt_led2;
-
- /* initial on brightness */
- int init_brt_led1;
- int init_brt_led2;
- enum lm3630_pwm_ctrl pwm_ctrl;
- enum lm3630_pwm_active pwm_active;
- enum lm3630_bank_a_ctrl bank_a_ctrl;
- enum lm3630_bank_b_ctrl bank_b_ctrl;
- unsigned int pwm_period;
- void (*pwm_set_intensity) (int brightness, int max_brightness);
-};
-
-#endif /* __LINUX_LM3630_H */
--- /dev/null
+/*
+* Simple driver for Texas Instruments LM3630A LED Flash driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+*/
+
+#ifndef __LINUX_LM3630A_H
+#define __LINUX_LM3630A_H
+
+#define LM3630A_NAME "lm3630a_bl"
+
+enum lm3630a_pwm_ctrl {
+ LM3630A_PWM_DISABLE = 0x00,
+ LM3630A_PWM_BANK_A,
+ LM3630A_PWM_BANK_B,
+ LM3630A_PWM_BANK_ALL,
+ LM3630A_PWM_BANK_A_ACT_LOW = 0x05,
+ LM3630A_PWM_BANK_B_ACT_LOW,
+ LM3630A_PWM_BANK_ALL_ACT_LOW,
+};
+
+enum lm3630a_leda_ctrl {
+ LM3630A_LEDA_DISABLE = 0x00,
+ LM3630A_LEDA_ENABLE = 0x04,
+ LM3630A_LEDA_ENABLE_LINEAR = 0x14,
+};
+
+enum lm3630a_ledb_ctrl {
+ LM3630A_LEDB_DISABLE = 0x00,
+ LM3630A_LEDB_ON_A = 0x01,
+ LM3630A_LEDB_ENABLE = 0x02,
+ LM3630A_LEDB_ENABLE_LINEAR = 0x0A,
+};
+
+#define LM3630A_MAX_BRIGHTNESS 255
+/*
+ *@leda_init_brt : led a init brightness. 4~255
+ *@leda_max_brt : led a max brightness. 4~255
+ *@leda_ctrl : led a disable, enable linear, enable exponential
+ *@ledb_init_brt : led b init brightness. 4~255
+ *@ledb_max_brt : led b max brightness. 4~255
+ *@ledb_ctrl : led b disable, enable linear, enable exponential
+ *@pwm_period : pwm period
+ *@pwm_ctrl : pwm disable, bank a or b, active high or low
+ */
+struct lm3630a_platform_data {
+
+ /* led a config. */
+ int leda_init_brt;
+ int leda_max_brt;
+ enum lm3630a_leda_ctrl leda_ctrl;
+ /* led b config. */
+ int ledb_init_brt;
+ int ledb_max_brt;
+ enum lm3630a_ledb_ctrl ledb_ctrl;
+ /* pwm config. */
+ unsigned int pwm_period;
+ enum lm3630a_pwm_ctrl pwm_ctrl;
+};
+
+#endif /* __LINUX_LM3630A_H */
projects / cascardo / linux.git / commitdiff