- reg : offset and length of the Display Port PHY register set;
- #phy-cells : from the generic PHY bindings, must be 0;
+Samsung S5P/EXYNOS SoC series USB PHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be one of the listed compatibles:
+ - "samsung,exynos4210-usb2-phy"
+ - "samsung,exynos4x12-usb2-phy"
+ - "samsung,exynos5250-usb2-phy"
+- reg : a list of registers used by phy driver
+ - first and obligatory is the location of phy modules registers
+- samsung,sysreg-phandle - handle to syscon used to control the system registers
+- samsung,pmureg-phandle - handle to syscon used to control PMU registers
+- #phy-cells : from the generic phy bindings, must be 1;
+- clocks and clock-names:
+ - the "phy" clock is required by the phy module, used as a gate
+ - the "ref" clock is used to get the rate of the clock provided to the
+ PHY module
+
+The first phandle argument in the PHY specifier identifies the PHY, its
+meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
+and Exynos 4212) it is as follows:
+ 0 - USB device ("device"),
+ 1 - USB host ("host"),
+ 2 - HSIC0 ("hsic0"),
+ 3 - HSIC1 ("hsic1"),
+
+Exynos 4210 and Exynos 4212 use mode switching and require that mode switch
+register is supplied.
+
+Example:
+
+For Exynos 4412 (compatible with Exynos 4212):
+
+usbphy: phy@125b0000 {
+ compatible = "samsung,exynos4x12-usb2-phy";
+ reg = <0x125b0000 0x100>;
+ clocks = <&clock 305>, <&clock 2>;
+ clock-names = "phy", "ref";
+ status = "okay";
+ #phy-cells = <1>;
+ samsung,sysreg-phandle = <&sys_reg>;
+ samsung,pmureg-phandle = <&pmu_reg>;
+};
+
+Then the PHY can be used in other nodes such as:
+
+phy-consumer@12340000 {
+ phys = <&usbphy 2>;
+ phy-names = "phy";
+};
+
+Refer to DT bindings documentation of particular PHY consumer devices for more
+information about required PHYs and the way of specification.
++
+ Samsung SATA PHY Controller
+ ---------------------------
+
+ SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+ Each SATA PHY controller should have its own node.
+
+ Required properties:
+ - compatible : compatible list, contains "samsung,exynos5250-sata-phy"
+ - reg : offset and length of the SATA PHY register set;
+ - #phy-cells : must be zero
+ - clocks : must be exactly one entry
+ - clock-names : must be "sata_phyctrl"
+ - samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments
+ - samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
+
+ Example:
+ sata_phy: sata-phy@12170000 {
+ compatible = "samsung,exynos5250-sata-phy";
+ reg = <0x12170000 0x1ff>;
+ clocks = <&clock 287>;
+ clock-names = "sata_phyctrl";
+ #phy-cells = <0>;
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+ samsung,syscon-phandle = <&pmu_syscon>;
+ };
+
+ Device-Tree bindings for sataphy i2c client driver
+ --------------------------------------------------
+
+ Required properties:
+ compatible: Should be "samsung,exynos-sataphy-i2c"
+ - reg: I2C address of the sataphy i2c device.
+
+ Example:
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
--- /dev/null
- l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
- clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+ /*
+ * SAMSUNG EXYNOS Flattened Device Tree enabled machine
+ *
+ * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ #include <linux/init.h>
+ #include <linux/io.h>
+ #include <linux/kernel.h>
+ #include <linux/serial_s3c.h>
+ #include <linux/of.h>
+ #include <linux/of_address.h>
+ #include <linux/of_fdt.h>
+ #include <linux/of_platform.h>
+ #include <linux/platform_device.h>
+ #include <linux/pm_domain.h>
+
+ #include <asm/cacheflush.h>
+ #include <asm/hardware/cache-l2x0.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+ #include <asm/memory.h>
+
+ #include <plat/cpu.h>
+
+ #include "common.h"
+ #include "mfc.h"
+ #include "regs-pmu.h"
+
+ #define L2_AUX_VAL 0x7C470001
+ #define L2_AUX_MASK 0xC200ffff
+
+ static struct map_desc exynos4_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
+ .length = SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_L2CC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC1,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC1),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ static struct map_desc exynos4210_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
+ .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ static struct map_desc exynos4x12_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
+ .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ static struct map_desc exynos5250_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
+ .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ static struct map_desc exynos5_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
+ .length = 144 * SZ_1K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+ };
+
+ void exynos_restart(enum reboot_mode mode, const char *cmd)
+ {
+ struct device_node *np;
+ u32 val = 0x1;
+ void __iomem *addr = EXYNOS_SWRESET;
+
+ if (of_machine_is_compatible("samsung,exynos5440")) {
+ u32 status;
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+
+ addr = of_iomap(np, 0) + 0xbc;
+ status = __raw_readl(addr);
+
+ addr = of_iomap(np, 0) + 0xcc;
+ val = __raw_readl(addr);
+
+ val = (val & 0xffff0000) | (status & 0xffff);
+ }
+
+ __raw_writel(val, addr);
+ }
+
+ static struct platform_device exynos_cpuidle = {
+ .name = "exynos_cpuidle",
+ .id = -1,
+ };
+
+ void __init exynos_cpuidle_init(void)
+ {
+ platform_device_register(&exynos_cpuidle);
+ }
+
+ void __init exynos_cpufreq_init(void)
+ {
+ platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
+ }
+
+ void __init exynos_init_late(void)
+ {
+ if (of_machine_is_compatible("samsung,exynos5440"))
+ /* to be supported later */
+ return;
+
+ pm_genpd_poweroff_unused();
+ exynos_pm_init();
+ }
+
+ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
+ int depth, void *data)
+ {
+ struct map_desc iodesc;
+ __be32 *reg;
+ unsigned long len;
+
+ if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
+ !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
+ return 0;
+
+ reg = of_get_flat_dt_prop(node, "reg", &len);
+ if (reg == NULL || len != (sizeof(unsigned long) * 2))
+ return 0;
+
+ iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
+ iodesc.length = be32_to_cpu(reg[1]) - 1;
+ iodesc.virtual = (unsigned long)S5P_VA_CHIPID;
+ iodesc.type = MT_DEVICE;
+ iotable_init(&iodesc, 1);
+ return 1;
+ }
+
+ /*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+ static void __init exynos_map_io(void)
+ {
+ if (soc_is_exynos4())
+ iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+ if (soc_is_exynos5())
+ iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+
+ if (soc_is_exynos4210()) {
+ if (samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0,
+ ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1,
+ ARRAY_SIZE(exynos4_iodesc1));
+ iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
+ }
+ if (soc_is_exynos4212() || soc_is_exynos4412())
+ iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
+ if (soc_is_exynos5250())
+ iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
+ }
+
+ void __init exynos_init_io(void)
+ {
+ debug_ll_io_init();
+
+ of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ exynos_map_io();
+ }
+
+ struct bus_type exynos_subsys = {
+ .name = "exynos-core",
+ .dev_name = "exynos-core",
+ };
+
+ static int __init exynos_core_init(void)
+ {
+ return subsys_system_register(&exynos_subsys, NULL);
+ }
+ core_initcall(exynos_core_init);
+
+ static int __init exynos4_l2x0_cache_init(void)
+ {
+ int ret;
+
+ ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
+ if (ret)
+ return ret;
+
++ if (IS_ENABLED(CONFIG_S5P_SLEEP)) {
++ l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
++ clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
++ }
+ return 0;
+ }
+ early_initcall(exynos4_l2x0_cache_init);
+
+ static void __init exynos_dt_machine_init(void)
+ {
+ struct device_node *i2c_np;
+ const char *i2c_compat = "samsung,s3c2440-i2c";
+ unsigned int tmp;
+ int id;
+
+ /*
+ * Exynos5's legacy i2c controller and new high speed i2c
+ * controller have muxed interrupt sources. By default the
+ * interrupts for 4-channel HS-I2C controller are enabled.
+ * If node for first four channels of legacy i2c controller
+ * are available then re-configure the interrupts via the
+ * system register.
+ */
+ if (soc_is_exynos5()) {
+ for_each_compatible_node(i2c_np, NULL, i2c_compat) {
+ if (of_device_is_available(i2c_np)) {
+ id = of_alias_get_id(i2c_np, "i2c");
+ if (id < 4) {
+ tmp = readl(EXYNOS5_SYS_I2C_CFG);
+ writel(tmp & ~(0x1 << id),
+ EXYNOS5_SYS_I2C_CFG);
+ }
+ }
+ }
+ }
+
+ exynos_cpuidle_init();
+ exynos_cpufreq_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ }
+
+ static char const *exynos_dt_compat[] __initconst = {
+ "samsung,exynos4",
+ "samsung,exynos4210",
+ "samsung,exynos4212",
+ "samsung,exynos4412",
+ "samsung,exynos5",
+ "samsung,exynos5250",
+ "samsung,exynos5420",
+ "samsung,exynos5440",
+ NULL
+ };
+
+ static void __init exynos_reserve(void)
+ {
+ #ifdef CONFIG_S5P_DEV_MFC
+ int i;
+ char *mfc_mem[] = {
+ "samsung,mfc-v5",
+ "samsung,mfc-v6",
+ "samsung,mfc-v7",
+ };
+
+ for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
+ if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
+ break;
+ #endif
+ }
+
+ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
+ /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .smp = smp_ops(exynos_smp_ops),
+ .map_io = exynos_init_io,
+ .init_early = exynos_firmware_init,
+ .init_machine = exynos_dt_machine_init,
+ .init_late = exynos_init_late,
+ .dt_compat = exynos_dt_compat,
+ .restart = exynos_restart,
+ .reserve = exynos_reserve,
+ MACHINE_END
projects / cascardo / linux.git / commitdiff