state->dev = dev;
- DRM_DEBUG_KMS("Allocate atomic state %p\n", state);
+ DRM_DEBUG_ATOMIC("Allocate atomic state %p\n", state);
return state;
fail:
struct drm_mode_config *config = &dev->mode_config;
int i;
- DRM_DEBUG_KMS("Clearing atomic state %p\n", state);
+ DRM_DEBUG_ATOMIC("Clearing atomic state %p\n", state);
for (i = 0; i < state->num_connector; i++) {
struct drm_connector *connector = state->connectors[i];
{
drm_atomic_state_clear(state);
- DRM_DEBUG_KMS("Freeing atomic state %p\n", state);
+ DRM_DEBUG_ATOMIC("Freeing atomic state %p\n", state);
kfree_state(state);
}
state->crtcs[index] = crtc;
crtc_state->state = state;
- DRM_DEBUG_KMS("Added [CRTC:%d] %p state to %p\n",
- crtc->base.id, crtc_state, state);
+ DRM_DEBUG_ATOMIC("Added [CRTC:%d] %p state to %p\n",
+ crtc->base.id, crtc_state, state);
return crtc_state;
}
*/
if (state->active && !state->enable) {
- DRM_DEBUG_KMS("[CRTC:%d] active without enabled\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] active without enabled\n",
+ crtc->base.id);
return -EINVAL;
}
state->planes[index] = plane;
plane_state->state = state;
- DRM_DEBUG_KMS("Added [PLANE:%d] %p state to %p\n",
- plane->base.id, plane_state, state);
+ DRM_DEBUG_ATOMIC("Added [PLANE:%d] %p state to %p\n",
+ plane->base.id, plane_state, state);
if (plane_state->crtc) {
struct drm_crtc_state *crtc_state;
/* either *both* CRTC and FB must be set, or neither */
if (WARN_ON(state->crtc && !state->fb)) {
- DRM_DEBUG_KMS("CRTC set but no FB\n");
+ DRM_DEBUG_ATOMIC("CRTC set but no FB\n");
return -EINVAL;
} else if (WARN_ON(state->fb && !state->crtc)) {
- DRM_DEBUG_KMS("FB set but no CRTC\n");
+ DRM_DEBUG_ATOMIC("FB set but no CRTC\n");
return -EINVAL;
}
/* Check whether this plane is usable on this CRTC */
if (!(plane->possible_crtcs & drm_crtc_mask(state->crtc))) {
- DRM_DEBUG_KMS("Invalid crtc for plane\n");
+ DRM_DEBUG_ATOMIC("Invalid crtc for plane\n");
return -EINVAL;
}
if (state->fb->pixel_format == plane->format_types[i])
break;
if (i == plane->format_count) {
- DRM_DEBUG_KMS("Invalid pixel format %s\n",
- drm_get_format_name(state->fb->pixel_format));
+ DRM_DEBUG_ATOMIC("Invalid pixel format %s\n",
+ drm_get_format_name(state->fb->pixel_format));
return -EINVAL;
}
state->crtc_x > INT_MAX - (int32_t) state->crtc_w ||
state->crtc_h > INT_MAX ||
state->crtc_y > INT_MAX - (int32_t) state->crtc_h) {
- DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
- state->crtc_w, state->crtc_h,
- state->crtc_x, state->crtc_y);
+ DRM_DEBUG_ATOMIC("Invalid CRTC coordinates %ux%u+%d+%d\n",
+ state->crtc_w, state->crtc_h,
+ state->crtc_x, state->crtc_y);
return -ERANGE;
}
state->src_x > fb_width - state->src_w ||
state->src_h > fb_height ||
state->src_y > fb_height - state->src_h) {
- DRM_DEBUG_KMS("Invalid source coordinates "
- "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
- state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
- state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
- state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
- state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10);
+ DRM_DEBUG_ATOMIC("Invalid source coordinates "
+ "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
+ state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
+ state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
+ state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
+ state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10);
return -ENOSPC;
}
* at most the array is a bit too large.
*/
if (index >= state->num_connector) {
- DRM_DEBUG_KMS("Hot-added connector would overflow state array, restarting\n");
+ DRM_DEBUG_ATOMIC("Hot-added connector would overflow state array, restarting\n");
return ERR_PTR(-EAGAIN);
}
state->connectors[index] = connector;
connector_state->state = state;
- DRM_DEBUG_KMS("Added [CONNECTOR:%d] %p state to %p\n",
- connector->base.id, connector_state, state);
+ DRM_DEBUG_ATOMIC("Added [CONNECTOR:%d] %p state to %p\n",
+ connector->base.id, connector_state, state);
if (connector_state->crtc) {
struct drm_crtc_state *crtc_state;
}
if (crtc)
- DRM_DEBUG_KMS("Link plane state %p to [CRTC:%d]\n",
- plane_state, crtc->base.id);
+ DRM_DEBUG_ATOMIC("Link plane state %p to [CRTC:%d]\n",
+ plane_state, crtc->base.id);
else
- DRM_DEBUG_KMS("Link plane state %p to [NOCRTC]\n", plane_state);
+ DRM_DEBUG_ATOMIC("Link plane state %p to [NOCRTC]\n",
+ plane_state);
return 0;
}
plane_state->fb = fb;
if (fb)
- DRM_DEBUG_KMS("Set [FB:%d] for plane state %p\n",
- fb->base.id, plane_state);
+ DRM_DEBUG_ATOMIC("Set [FB:%d] for plane state %p\n",
+ fb->base.id, plane_state);
else
- DRM_DEBUG_KMS("Set [NOFB] for plane state %p\n", plane_state);
+ DRM_DEBUG_ATOMIC("Set [NOFB] for plane state %p\n",
+ plane_state);
}
EXPORT_SYMBOL(drm_atomic_set_fb_for_plane);
conn_state->crtc = crtc;
if (crtc)
- DRM_DEBUG_KMS("Link connector state %p to [CRTC:%d]\n",
- conn_state, crtc->base.id);
+ DRM_DEBUG_ATOMIC("Link connector state %p to [CRTC:%d]\n",
+ conn_state, crtc->base.id);
else
- DRM_DEBUG_KMS("Link connector state %p to [NOCRTC]\n",
- conn_state);
+ DRM_DEBUG_ATOMIC("Link connector state %p to [NOCRTC]\n",
+ conn_state);
return 0;
}
if (ret)
return ret;
- DRM_DEBUG_KMS("Adding all current connectors for [CRTC:%d] to %p\n",
- crtc->base.id, state);
+ DRM_DEBUG_ATOMIC("Adding all current connectors for [CRTC:%d] to %p\n",
+ crtc->base.id, state);
/*
* Changed connectors are already in @state, so only need to look at the
num_connected_connectors++;
}
- DRM_DEBUG_KMS("State %p has %i connectors for [CRTC:%d]\n",
- state, num_connected_connectors, crtc->base.id);
+ DRM_DEBUG_ATOMIC("State %p has %i connectors for [CRTC:%d]\n",
+ state, num_connected_connectors, crtc->base.id);
return num_connected_connectors;
}
int ncrtcs = config->num_crtc;
int i, ret = 0;
- DRM_DEBUG_KMS("checking %p\n", state);
+ DRM_DEBUG_ATOMIC("checking %p\n", state);
for (i = 0; i < nplanes; i++) {
struct drm_plane *plane = state->planes[i];
ret = drm_atomic_plane_check(plane, state->plane_states[i]);
if (ret) {
- DRM_DEBUG_KMS("[PLANE:%d] atomic core check failed\n",
- plane->base.id);
+ DRM_DEBUG_ATOMIC("[PLANE:%d] atomic core check failed\n",
+ plane->base.id);
return ret;
}
}
ret = drm_atomic_crtc_check(crtc, state->crtc_states[i]);
if (ret) {
- DRM_DEBUG_KMS("[CRTC:%d] atomic core check failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] atomic core check failed\n",
+ crtc->base.id);
return ret;
}
}
if (crtc_state->mode_changed ||
crtc_state->active_changed) {
- DRM_DEBUG_KMS("[CRTC:%d] requires full modeset\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] requires full modeset\n",
+ crtc->base.id);
return -EINVAL;
}
}
if (ret)
return ret;
- DRM_DEBUG_KMS("commiting %p\n", state);
+ DRM_DEBUG_ATOMIC("commiting %p\n", state);
return config->funcs->atomic_commit(state->dev, state, false);
}
if (ret)
return ret;
- DRM_DEBUG_KMS("commiting %p asynchronously\n", state);
+ DRM_DEBUG_ATOMIC("commiting %p asynchronously\n", state);
return config->funcs->atomic_commit(state->dev, state, true);
}
*/
WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
- DRM_DEBUG_KMS("[ENCODER:%d:%s] in use on [CRTC:%d], stealing it\n",
- encoder->base.id, encoder->name,
- encoder_crtc->base.id);
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d], stealing it\n",
+ encoder->base.id, encoder->name,
+ encoder_crtc->base.id);
crtc_state = drm_atomic_get_crtc_state(state, encoder_crtc);
if (IS_ERR(crtc_state))
if (connector->state->best_encoder != encoder)
continue;
- DRM_DEBUG_KMS("Stealing encoder from [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("Stealing encoder from [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
connector_state = drm_atomic_get_connector_state(state,
connector);
if (!connector)
return 0;
- DRM_DEBUG_KMS("Updating routing for [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("Updating routing for [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
if (connector->state->crtc != connector_state->crtc) {
if (connector->state->crtc) {
}
if (!connector_state->crtc) {
- DRM_DEBUG_KMS("Disabling [CONNECTOR:%d:%s]\n",
+ DRM_DEBUG_ATOMIC("Disabling [CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
new_encoder = funcs->best_encoder(connector);
if (!new_encoder) {
- DRM_DEBUG_KMS("No suitable encoder found for [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("No suitable encoder found for [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
return -EINVAL;
}
if (new_encoder == connector_state->best_encoder) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d]\n",
- connector->base.id,
- connector->name,
- new_encoder->base.id,
- new_encoder->name,
- connector_state->crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d]\n",
+ connector->base.id,
+ connector->name,
+ new_encoder->base.id,
+ new_encoder->name,
+ connector_state->crtc->base.id);
return 0;
}
if (encoder_crtc) {
ret = steal_encoder(state, new_encoder, encoder_crtc);
if (ret) {
- DRM_DEBUG_KMS("Encoder stealing failed for [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("Encoder stealing failed for [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
return ret;
}
}
crtc_state = state->crtc_states[idx];
crtc_state->mode_changed = true;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d]\n",
- connector->base.id,
- connector->name,
- new_encoder->base.id,
- new_encoder->name,
- connector_state->crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d]\n",
+ connector->base.id,
+ connector->name,
+ new_encoder->base.id,
+ new_encoder->name,
+ connector_state->crtc->base.id);
return 0;
}
encoder->bridge, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_KMS("Bridge fixup failed\n");
+ DRM_DEBUG_ATOMIC("Bridge fixup failed\n");
return -EINVAL;
}
}
ret = funcs->atomic_check(encoder, crtc_state,
conn_state);
if (ret) {
- DRM_DEBUG_KMS("[ENCODER:%d:%s] check failed\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] check failed\n",
+ encoder->base.id, encoder->name);
return ret;
}
} else {
ret = funcs->mode_fixup(encoder, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_KMS("[ENCODER:%d:%s] fixup failed\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] fixup failed\n",
+ encoder->base.id, encoder->name);
return -EINVAL;
}
}
ret = funcs->mode_fixup(crtc, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_KMS("[CRTC:%d] fixup failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] fixup failed\n",
+ crtc->base.id);
return -EINVAL;
}
}
continue;
if (!drm_mode_equal(&crtc->state->mode, &crtc_state->mode)) {
- DRM_DEBUG_KMS("[CRTC:%d] mode changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] mode changed\n",
+ crtc->base.id);
crtc_state->mode_changed = true;
}
if (crtc->state->enable != crtc_state->enable) {
- DRM_DEBUG_KMS("[CRTC:%d] enable changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] enable changed\n",
+ crtc->base.id);
crtc_state->mode_changed = true;
}
}
* a full modeset because update_connector_routing force that.
*/
if (crtc->state->active != crtc_state->active) {
- DRM_DEBUG_KMS("[CRTC:%d] active changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] active changed\n",
+ crtc->base.id);
crtc_state->active_changed = true;
}
if (!needs_modeset(crtc_state))
continue;
- DRM_DEBUG_KMS("[CRTC:%d] needs all connectors, enable: %c, active: %c\n",
- crtc->base.id,
- crtc_state->enable ? 'y' : 'n',
+ DRM_DEBUG_ATOMIC("[CRTC:%d] needs all connectors, enable: %c, active: %c\n",
+ crtc->base.id,
+ crtc_state->enable ? 'y' : 'n',
crtc_state->active ? 'y' : 'n');
ret = drm_atomic_add_affected_connectors(state, crtc);
crtc);
if (crtc_state->enable != !!num_connectors) {
- DRM_DEBUG_KMS("[CRTC:%d] enabled/connectors mismatch\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] enabled/connectors mismatch\n",
+ crtc->base.id);
return -EINVAL;
}
ret = funcs->atomic_check(plane, plane_state);
if (ret) {
- DRM_DEBUG_KMS("[PLANE:%d] atomic driver check failed\n",
- plane->base.id);
+ DRM_DEBUG_ATOMIC("[PLANE:%d] atomic driver check failed\n",
+ plane->base.id);
return ret;
}
}
ret = funcs->atomic_check(crtc, state->crtc_states[i]);
if (ret) {
- DRM_DEBUG_KMS("[CRTC:%d] atomic driver check failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] atomic driver check failed\n",
+ crtc->base.id);
return ret;
}
}
funcs = encoder->helper_private;
- DRM_DEBUG_KMS("disabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("disabling [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
funcs = crtc->helper_private;
- DRM_DEBUG_KMS("disabling [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("disabling [CRTC:%d]\n",
+ crtc->base.id);
/* Right function depends upon target state. */
funcs = crtc->helper_private;
- if (crtc->state->enable) {
- DRM_DEBUG_KMS("modeset on [CRTC:%d]\n",
- crtc->base.id);
+ if (crtc->state->enable && funcs->mode_set_nofb) {
+ DRM_DEBUG_ATOMIC("modeset on [CRTC:%d]\n",
+ crtc->base.id);
funcs->mode_set_nofb(crtc);
}
if (!new_crtc_state->mode_changed)
continue;
- DRM_DEBUG_KMS("modeset on [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("modeset on [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
* it away), so we won't call call mode_set hooks twice.
*/
- funcs->mode_set(encoder, mode, adjusted_mode);
+ if (funcs->mode_set)
+ funcs->mode_set(encoder, mode, adjusted_mode);
if (encoder->bridge && encoder->bridge->funcs->mode_set)
encoder->bridge->funcs->mode_set(encoder->bridge,
}
/**
- * drm_atomic_helper_commit_pre_planes - modeset commit before plane updates
+ * drm_atomic_helper_commit_modeset_disables - modeset commit to disable outputs
* @dev: DRM device
- * @state: atomic state
+ * @old_state: atomic state object with old state structures
*
- * This function commits the modeset changes that need to be committed before
- * updating planes. It shuts down all the outputs that need to be shut down and
+ * This function shuts down all the outputs that need to be shut down and
* prepares them (if required) with the new mode.
+ *
+ * For compatability with legacy crtc helpers this should be called before
+ * drm_atomic_helper_commit_planes(), which is what the default commit function
+ * does. But drivers with different needs can group the modeset commits together
+ * and do the plane commits at the end. This is useful for drivers doing runtime
+ * PM since planes updates then only happen when the CRTC is actually enabled.
*/
-void drm_atomic_helper_commit_pre_planes(struct drm_device *dev,
- struct drm_atomic_state *state)
+void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
{
- disable_outputs(dev, state);
- set_routing_links(dev, state);
- crtc_set_mode(dev, state);
+ disable_outputs(dev, old_state);
+ set_routing_links(dev, old_state);
+ crtc_set_mode(dev, old_state);
}
-EXPORT_SYMBOL(drm_atomic_helper_commit_pre_planes);
+EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables);
/**
- * drm_atomic_helper_commit_post_planes - modeset commit after plane updates
+ * drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
- * This function commits the modeset changes that need to be committed after
- * updating planes: It enables all the outputs with the new configuration which
- * had to be turned off for the update.
+ * This function enables all the outputs with the new configuration which had to
+ * be turned off for the update.
+ *
+ * For compatability with legacy crtc helpers this should be called after
+ * drm_atomic_helper_commit_planes(), which is what the default commit function
+ * does. But drivers with different needs can group the modeset commits together
+ * and do the plane commits at the end. This is useful for drivers doing runtime
+ * PM since planes updates then only happen when the CRTC is actually enabled.
*/
-void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
- struct drm_atomic_state *old_state)
+void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
{
int ncrtcs = old_state->dev->mode_config.num_crtc;
int i;
funcs = crtc->helper_private;
if (crtc->state->enable) {
- DRM_DEBUG_KMS("enabling [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("enabling [CRTC:%d]\n",
+ crtc->base.id);
if (funcs->enable)
funcs->enable(crtc);
encoder = connector->state->best_encoder;
funcs = encoder->helper_private;
- DRM_DEBUG_KMS("enabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("enabling [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
encoder->bridge->funcs->enable(encoder->bridge);
}
}
-EXPORT_SYMBOL(drm_atomic_helper_commit_post_planes);
+EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_enables);
static void wait_for_fences(struct drm_device *dev,
struct drm_atomic_state *state)
wait_for_fences(dev, state);
- drm_atomic_helper_commit_pre_planes(dev, state);
+ drm_atomic_helper_commit_modeset_disables(dev, state);
drm_atomic_helper_commit_planes(dev, state);
- drm_atomic_helper_commit_post_planes(dev, state);
+ drm_atomic_helper_commit_modeset_enables(dev, state);
drm_atomic_helper_wait_for_vblanks(dev, state);
EXPORT_SYMBOL(drm_atomic_helper_set_config);
/**
- * drm_atomic_helper_crtc_set_property - helper for crtc prorties
+ * drm_atomic_helper_crtc_set_property - helper for crtc properties
* @crtc: DRM crtc
* @property: DRM property
* @val: value of property
*
- * Provides a default plane disablle handler using the atomic driver interface.
+ * Provides a default crtc set_property handler using the atomic driver
+ * interface.
*
* RETURNS:
* Zero on success, error code on failure
EXPORT_SYMBOL(drm_atomic_helper_crtc_set_property);
/**
- * drm_atomic_helper_plane_set_property - helper for plane prorties
+ * drm_atomic_helper_plane_set_property - helper for plane properties
* @plane: DRM plane
* @property: DRM property
* @val: value of property
*
- * Provides a default plane disable handler using the atomic driver interface.
+ * Provides a default plane set_property handler using the atomic driver
+ * interface.
*
* RETURNS:
* Zero on success, error code on failure
EXPORT_SYMBOL(drm_atomic_helper_plane_set_property);
/**
- * drm_atomic_helper_connector_set_property - helper for connector prorties
+ * drm_atomic_helper_connector_set_property - helper for connector properties
* @connector: DRM connector
* @property: DRM property
* @val: value of property
*
- * Provides a default plane disablle handler using the atomic driver interface.
+ * Provides a default connector set_property handler using the atomic driver
+ * interface.
*
* RETURNS:
* Zero on success, error code on failure
return -ENOENT;
drm_modeset_lock_crtc(crtc, crtc->primary);
- crtc_resp->x = crtc->x;
- crtc_resp->y = crtc->y;
crtc_resp->gamma_size = crtc->gamma_size;
if (crtc->primary->fb)
crtc_resp->fb_id = crtc->primary->fb->base.id;
else
crtc_resp->fb_id = 0;
- if (crtc->enabled) {
-
- drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->mode);
- crtc_resp->mode_valid = 1;
+ if (crtc->state) {
+ crtc_resp->x = crtc->primary->state->src_x >> 16;
+ crtc_resp->y = crtc->primary->state->src_y >> 16;
+ if (crtc->state->enable) {
+ drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
+ crtc_resp->mode_valid = 1;
+ } else {
+ crtc_resp->mode_valid = 0;
+ }
} else {
- crtc_resp->mode_valid = 0;
+ crtc_resp->x = crtc->x;
+ crtc_resp->y = crtc->y;
+ if (crtc->enabled) {
+ drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->mode);
+ crtc_resp->mode_valid = 1;
+
+ } else {
+ crtc_resp->mode_valid = 0;
+ }
}
drm_modeset_unlock_crtc(crtc);
* Acquire a reference count on vblank events to avoid having them disabled
* while in use.
*
- * This is the native kms version of drm_vblank_off().
+ * This is the native kms version of drm_vblank_get().
*
* Returns:
* Zero on success, nonzero on failure.
* FIXME: The proper sequence here will eventually be:
*
* drm_atomic_helper_swap_state(dev, state)
- * drm_atomic_helper_commit_pre_planes(dev, state);
+ * drm_atomic_helper_commit_modeset_disables(dev, state);
* drm_atomic_helper_commit_planes(dev, state);
- * drm_atomic_helper_commit_post_planes(dev, state);
+ * drm_atomic_helper_commit_modeset_enables(dev, state);
* drm_atomic_helper_wait_for_vblanks(dev, state);
* drm_atomic_helper_cleanup_planes(dev, state);
* drm_atomic_state_free(state);
kms->funcs->prepare_commit(kms, state);
- drm_atomic_helper_commit_pre_planes(dev, state);
+ drm_atomic_helper_commit_modeset_disables(dev, state);
drm_atomic_helper_commit_planes(dev, state);
- drm_atomic_helper_commit_post_planes(dev, state);
+ drm_atomic_helper_commit_modeset_enables(dev, state);
/* NOTE: _wait_for_vblanks() only waits for vblank on
* enabled CRTCs. So we end up faulting when disabling
* current layout.
*/
- drm_atomic_helper_commit_pre_planes(drm, state);
+ drm_atomic_helper_commit_modeset_disables(drm, state);
drm_atomic_helper_commit_planes(drm, state);
- drm_atomic_helper_commit_post_planes(drm, state);
+ drm_atomic_helper_commit_modeset_enables(drm, state);
drm_atomic_helper_wait_for_vblanks(drm, state);
* PRIME: used in the prime code.
* This is the category used by the DRM_DEBUG_PRIME() macro.
*
+ * ATOMIC: used in the atomic code.
+ * This is the category used by the DRM_DEBUG_ATOMIC() macro.
+ *
* Enabling verbose debug messages is done through the drm.debug parameter,
* each category being enabled by a bit.
*
#define DRM_UT_DRIVER 0x02
#define DRM_UT_KMS 0x04
#define DRM_UT_PRIME 0x08
+#define DRM_UT_ATOMIC 0x10
extern __printf(2, 3)
void drm_ut_debug_printk(const char *function_name,
if (unlikely(drm_debug & DRM_UT_PRIME)) \
drm_ut_debug_printk(__func__, fmt, ##args); \
} while (0)
+#define DRM_DEBUG_ATOMIC(fmt, args...) \
+ do { \
+ if (unlikely(drm_debug & DRM_UT_ATOMIC)) \
+ drm_ut_debug_printk(__func__, fmt, ##args); \
+ } while (0)
/*@}*/
void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev,
struct drm_atomic_state *old_state);
-void drm_atomic_helper_commit_pre_planes(struct drm_device *dev,
- struct drm_atomic_state *state);
-void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
+void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
+ struct drm_atomic_state *state);
+void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
struct drm_atomic_state *old_state);
int drm_atomic_helper_prepare_planes(struct drm_device *dev,
int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode, int x, int y,
struct drm_framebuffer *old_fb);
+ /* Actually set the mode for atomic helpers, optional */
void (*mode_set_nofb)(struct drm_crtc *crtc);
/* Move the crtc on the current fb to the given position *optional* */
* @mode_fixup: try to fixup proposed mode for this connector
* @prepare: part of the disable sequence, called before the CRTC modeset
* @commit: called after the CRTC modeset
- * @mode_set: set this mode
+ * @mode_set: set this mode, optional for atomic helpers
* @get_crtc: return CRTC that the encoder is currently attached to
* @detect: connection status detection
* @disable: disable encoder when not in use (overrides DPMS off)
# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */
# define DP_OUI_SUPPORT (1 << 7)
+#define DP_SUPPORTED_LINK_RATES 0x010 /*eDP 1.4*/
+#define DP_MAX_SUPPORTED_RATES 0x8
+
#define DP_I2C_SPEED_CAP 0x00c /* DPI */
# define DP_I2C_SPEED_1K 0x01
# define DP_I2C_SPEED_5K 0x02
# define DP_I2C_SPEED_1M 0x20
#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */
+# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
/* Multiple stream transport */
# define DP_UP_REQ_EN (1 << 1)
# define DP_UPSTREAM_IS_SRC (1 << 2)
+#define DP_LINK_RATE_SET 0x115
+
#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */
# define DP_PSR_ENABLE (1 << 0)
# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
# define DP_SET_POWER_D3 0x2
# define DP_SET_POWER_MASK 0x3
+#define DP_EDP_DPCD_REV 0x700
+
#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */
#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */
#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */
#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
#define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */
#define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */
-#define CRTC_STEREO_DOUBLE_ONLY (CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
+#define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
projects / cascardo / linux.git / commitdiff