Merge tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull serial driver fixes from Greg KH:
 "Here are some small serial driver fixes for 4.8-rc5.  One fixes an
  oft-reported build issue with the fintek driver, another reverts a
  patch that was causing problems, one fixes a crash, and some new
  device ids were added.

  All of these have been in linux-next for a while"

* tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250: added acces i/o products quad and octal serial cards
  serial: 8250_mid: fix divide error bug if baud rate is 0
  Revert "tty/serial/8250: use mctrl_gpio helpers"
  8250/fintek: rename IRQ_MODE macro

diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index f5561ac..936ab5b 100644 (file)
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
                interrupts = <10>;
                reg-shift = <2>;
        };
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-       uart4: serial@49042000 {
-               compatible = "ti,omap3-uart";
-               reg = <0x49042000 0x400>;
-               interrupts = <80>;
-               ti,hwmods = "uart4";
-               clock-frequency = <48000000>;
-               cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-               rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-               dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-               dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-               dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-               rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-       };

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 122e0e4..1a16fea 100644 (file)
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -15,8 +15,6 @@
 #include <linux/serial_reg.h>
 #include <linux/dmaengine.h>
 
-#include "../serial_mctrl_gpio.h"
-
 struct uart_8250_dma {
        int (*tx_dma)(struct uart_8250_port *p);
        int (*rx_dma)(struct uart_8250_port *p);
@@ -133,43 +131,12 @@ void serial8250_em485_destroy(struct uart_8250_port *p);
 
 static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
 {
-       int mctrl_gpio = 0;
-
        serial_out(up, UART_MCR, value);
-
-       if (value & UART_MCR_RTS)
-               mctrl_gpio |= TIOCM_RTS;
-       if (value & UART_MCR_DTR)
-               mctrl_gpio |= TIOCM_DTR;
-
-       mctrl_gpio_set(up->gpios, mctrl_gpio);
 }
 
 static inline int serial8250_in_MCR(struct uart_8250_port *up)
 {
-       int mctrl, mctrl_gpio = 0;
-
-       mctrl = serial_in(up, UART_MCR);
-
-       /* save current MCR values */
-       if (mctrl & UART_MCR_RTS)
-               mctrl_gpio |= TIOCM_RTS;
-       if (mctrl & UART_MCR_DTR)
-               mctrl_gpio |= TIOCM_DTR;
-
-       mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
-
-       if (mctrl_gpio & TIOCM_RTS)
-               mctrl |= UART_MCR_RTS;
-       else
-               mctrl &= ~UART_MCR_RTS;
-
-       if (mctrl_gpio & TIOCM_DTR)
-               mctrl |= UART_MCR_DTR;
-       else
-               mctrl &= ~UART_MCR_DTR;
-
-       return mctrl;
+       return serial_in(up, UART_MCR);
 }
 
 #if defined(__alpha__) && !defined(CONFIG_PCI)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 13ad5c3..dcf43f6 100644 (file)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -974,8 +974,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 
        uart = serial8250_find_match_or_unused(&up->port);
        if (uart && uart->port.type != PORT_8250_CIR) {
-               struct mctrl_gpios *gpios;
-
                if (uart->port.dev)
                        uart_remove_one_port(&serial8250_reg, &uart->port);
 
@@ -1013,13 +1011,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
                if (up->port.flags & UPF_FIXED_TYPE)
                        uart->port.type = up->port.type;
 
-               gpios = mctrl_gpio_init(&uart->port, 0);
-               if (IS_ERR(gpios)) {
-                       if (PTR_ERR(gpios) != -ENOSYS)
-                               return PTR_ERR(gpios);
-               } else
-                       uart->gpios = gpios;
-
                serial8250_set_defaults(uart);
 
                /* Possibly override default I/O functions.  */

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 737b4b3..0facc78 100644 (file)
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -31,7 +31,7 @@
 #define IO_ADDR2 0x60
 #define LDN 0x7
 
-#define IRQ_MODE       0x70
+#define FINTEK_IRQ_MODE        0x70
 #define IRQ_SHARE      BIT(4)
 #define IRQ_MODE_MASK  (BIT(6) | BIT(5))
 #define IRQ_LEVEL_LOW  0
@@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
        outb(LDN, pdata->base_port + ADDR_PORT);
        outb(pdata->index, pdata->base_port + DATA_PORT);
 
-       outb(IRQ_MODE, pdata->base_port + ADDR_PORT);
+       outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
        tmp = inb(pdata->base_port + DATA_PORT);
 
        tmp &= ~IRQ_MODE_MASK;

diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index 339de9c..20c5db2 100644 (file)
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -168,6 +168,9 @@ static void mid8250_set_termios(struct uart_port *p,
        unsigned long w = BIT(24) - 1;
        unsigned long mul, div;
 
+       /* Gracefully handle the B0 case: fall back to B9600 */
+       fuart = fuart ? fuart : 9600 * 16;
+
        if (mid->board->freq < fuart) {
                /* Find prescaler value that satisfies Fuart < Fref */
                if (mid->board->freq > baud)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index e14982f..61ad6c3 100644 (file)
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -134,21 +134,18 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
        serial8250_do_set_mctrl(port, mctrl);
 
-       if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios,
-                                               UART_GPIO_RTS))) {
-               /*
-                * Turn off autoRTS if RTS is lowered and restore autoRTS
-                * setting if RTS is raised
-                */
-               lcr = serial_in(up, UART_LCR);
-               serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-               if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
-                       priv->efr |= UART_EFR_RTS;
-               else
-                       priv->efr &= ~UART_EFR_RTS;
-               serial_out(up, UART_EFR, priv->efr);
-               serial_out(up, UART_LCR, lcr);
-       }
+       /*
+        * Turn off autoRTS if RTS is lowered and restore autoRTS setting
+        * if RTS is raised
+        */
+       lcr = serial_in(up, UART_LCR);
+       serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+       if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+               priv->efr |= UART_EFR_RTS;
+       else
+               priv->efr &= ~UART_EFR_RTS;
+       serial_out(up, UART_EFR, priv->efr);
+       serial_out(up, UART_LCR, lcr);
 }
 
 /*
@@ -449,9 +446,7 @@ static void omap_8250_set_termios(struct uart_port *port,
        priv->efr = 0;
        up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
 
-       if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW
-               && IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios,
-                                                       UART_GPIO_RTS))) {
+       if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
                /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
                up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
                priv->efr |= UART_EFR_CTS;

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 20ebaea..bc51b32 100644 (file)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1950,6 +1950,43 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_PERICOM_PI7C9X7954       0x7954
 #define PCI_DEVICE_ID_PERICOM_PI7C9X7958       0x7958
 
+#define PCI_VENDOR_ID_ACCESIO                  0x494f
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB    0x1051
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S     0x1053
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB    0x105C
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S     0x105E
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB  0x1091
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2   0x1093
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB  0x1099
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4   0x109B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB   0x10D1
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM    0x10D3
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB   0x10DA
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM    0x10DC
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1   0x1108
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2   0x1110
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2   0x1111
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4   0x1118
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4   0x1119
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S      0x1152
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S      0x115A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2    0x1190
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2   0x1191
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4    0x1198
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4   0x1199
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM     0x11D0
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4    0x105A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4    0x105B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8    0x106A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8    0x106B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4    0x1098
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8    0x10A9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM     0x10D9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM     0x10E9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM     0x11D8
+
+
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584        0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588        0x1588
@@ -5112,6 +5149,108 @@ static struct pci_device_id serial_pci_tbl[] = {
                PCI_ANY_ID, PCI_ANY_ID,
                0,
                0, pbn_pericom_PI7C9X7958 },
+       /*
+        * ACCES I/O Products quad
+        */
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7954 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
+       {       PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_pericom_PI7C9X7958 },
        /*
         * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
         */

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 7481b95..bdfa659 100644 (file)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1618,8 +1618,6 @@ static void serial8250_disable_ms(struct uart_port *port)
        if (up->bugs & UART_BUG_NOMSR)
                return;
 
-       mctrl_gpio_disable_ms(up->gpios);
-
        up->ier &= ~UART_IER_MSI;
        serial_port_out(port, UART_IER, up->ier);
 }
@@ -1632,8 +1630,6 @@ static void serial8250_enable_ms(struct uart_port *port)
        if (up->bugs & UART_BUG_NOMSR)
                return;
 
-       mctrl_gpio_enable_ms(up->gpios);
-
        up->ier |= UART_IER_MSI;
 
        serial8250_rpm_get(up);
@@ -1917,8 +1913,7 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port)
                ret |= TIOCM_DSR;
        if (status & UART_MSR_CTS)
                ret |= TIOCM_CTS;
-
-       return mctrl_gpio_get(up->gpios, &ret);
+       return ret;
 }
 EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl);
 

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index c9ec839..7c6f7af 100644 (file)
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -6,7 +6,6 @@
 config SERIAL_8250
        tristate "8250/16550 and compatible serial support"
        select SERIAL_CORE
-       select SERIAL_MCTRL_GPIO if GPIOLIB
        ---help---
          This selects whether you want to include the driver for the standard
          serial ports.  The standard answer is Y.  People who might say N

diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 923266c..48ec765 100644 (file)
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -111,7 +111,6 @@ struct uart_8250_port {
                                                 *   if no_console_suspend
                                                 */
        unsigned char           probe;
-       struct mctrl_gpios      *gpios;
 #define UART_PROBE_RSA (1 << 0)
 
        /*