#include "af9013_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct af9013_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
const u8 *val, int len)
{
int ret;
- u8 buf[3+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->config.i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 3 + len,
.buf = buf,
}
};
+ if (3 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = (reg >> 8) & 0xff;
buf[1] = (reg >> 0) & 0xff;
buf[2] = mbox;
#include "af9033_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct af9033_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
int len)
{
int ret;
- u8 buf[3 + len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = state->cfg.i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 3 + len,
.buf = buf,
}
};
+ if (3 + len > sizeof(buf)) {
+ dev_warn(&state->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = (reg >> 16) & 0xff;
buf[1] = (reg >> 8) & 0xff;
buf[2] = (reg >> 0) & 0xff;
const struct reg_val *tab, int tab_len)
{
int ret, i, j;
- u8 buf[tab_len];
+ u8 buf[MAX_XFER_SIZE];
+
+ if (tab_len > sizeof(buf)) {
+ dev_warn(&state->i2c->dev,
+ "%s: i2c wr len=%d is too big!\n",
+ KBUILD_MODNAME, tab_len);
+ return -EINVAL;
+ }
dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len);
#include "bcm3510.h"
#include "bcm3510_priv.h"
+/* Max transfer size done by bcm3510_do_hab_cmd() function */
+#define MAX_XFER_SIZE 128
+
struct bcm3510_state {
struct i2c_adapter* i2c;
static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
{
- u8 ob[olen+2],ib[ilen+2];
+ u8 ob[MAX_XFER_SIZE], ib[MAX_XFER_SIZE];
int ret = 0;
+ if (ilen + 2 > sizeof(ib)) {
+ deb_hab("do_hab_cmd: ilen=%d is too big!\n", ilen);
+ return -EINVAL;
+ }
+
+ if (olen + 2 > sizeof(ob)) {
+ deb_hab("do_hab_cmd: olen=%d is too big!\n", olen);
+ return -EINVAL;
+ }
+
ob[0] = cmd;
ob[1] = msgid;
memcpy(&ob[2],obuf,olen);
#include "cxd2820r_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple registers */
static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
u8 *val, int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = i2c,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
u8 *val, int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = i2c,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
#include "itd1000.h"
#include "itd1000_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
/* don't write more than one byte with flexcop behind */
static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 len)
{
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = state->cfg->i2c_address, .flags = 0, .buf = buf, .len = len+1
};
+
+ if (1 + len > sizeof(buf)) {
+ printk(KERN_WARNING
+ "itd1000: i2c wr reg=%04x: len=%d is too big!\n",
+ reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], v, len);
#include "mt312_priv.h"
#include "mt312.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
struct mt312_state {
struct i2c_adapter *i2c;
const u8 *src, const size_t count)
{
int ret;
- u8 buf[count + 1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg;
+ if (1 + count > sizeof(buf)) {
+ printk(KERN_WARNING
+ "mt312: write: len=%zd is too big!\n", count);
+ return -EINVAL;
+ }
+
if (debug) {
int i;
dprintk("W(%d):", reg & 0x7f);
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
#define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw"
#define CRC_CCIT_MASK 0x1021
static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg,
const u8 *buf, u8 len)
{
- u8 buf2 [len+1];
+ u8 buf2[MAX_XFER_SIZE];
int err;
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
+ if (1 + len > sizeof(buf2)) {
+ pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n",
+ __func__, reg, len);
+ return -EINVAL;
+ }
+
buf2[0] = reg;
memcpy(&buf2[1], buf, len);
#include "rtl2830_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple hardware registers */
static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len)
{
int ret;
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
- .len = 1+len,
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
#include "dvb_math.h"
#include <linux/bitops.h>
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
int rtl2832_debug;
module_param_named(debug, rtl2832_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
- .len = 1+len,
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
static int s5h1420_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
{
struct s5h1420_state *state = i2c_get_adapdata(i2c_adap);
- struct i2c_msg m[1 + num];
+ struct i2c_msg m[3];
u8 tx_open[2] = { CON_1, state->CON_1_val | 1 }; /* repeater stops once there was a stop condition */
+ if (1 + num > ARRAY_SIZE(m)) {
+ printk(KERN_WARNING
+ "%s: i2c xfer: num=%d is too big!\n",
+ KBUILD_MODNAME, num);
+ return -EOPNOTSUPP;
+ }
+
memset(m, 0, sizeof(struct i2c_msg) * (1 + num));
m[0].addr = state->config->demod_address;
memcpy(&m[1], msg, sizeof(struct i2c_msg) * num);
- return i2c_transfer(state->i2c, m, 1+num) == 1 + num ? num : -EIO;
+ return i2c_transfer(state->i2c, m, 1 + num) == 1 + num ? num : -EIO;
}
static struct i2c_algorithm s5h1420_tuner_i2c_algo = {
#include "stb0899_priv.h"
#include "stb0899_reg.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static unsigned int verbose = 0;//1;
module_param(verbose, int, 0644);
int stb0899_write_regs(struct stb0899_state *state, unsigned int reg, u8 *data, u32 count)
{
int ret;
- u8 buf[2 + count];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg i2c_msg = {
.addr = state->config->demod_address,
.flags = 0,
.len = 2 + count
};
+ if (2 + count > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, count);
+ return -EINVAL;
+ }
+
buf[0] = reg >> 8;
buf[1] = reg & 0xff;
memcpy(&buf[2], data, count);
static unsigned int verbose;
module_param(verbose, int, 0644);
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
#define FE_ERROR 0
#define FE_NOTICE 1
static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
{
int rc;
- u8 cmdbuf[len + 1];
+ u8 cmdbuf[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = state->config->tuner_address,
.flags = 0,
.len = len + 1
};
+ if (1 + len > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr: len=%d is too big!\n",
+ KBUILD_MODNAME, len);
+ return -EINVAL;
+ }
+
if (unlikely(start < 1 || start + len > STB6100_NUMREGS)) {
dprintk(verbose, FE_ERROR, 1, "Invalid register range %d:%d",
start, len);
#include "stv0367_regs.h"
#include "stv0367_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static int stvdebug;
module_param_named(debug, stvdebug, int, 0644);
static
int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
{
- u8 buf[len + 2];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = state->config->demod_address,
.flags = 0,
};
int ret;
+ if (2 + len > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
+
buf[0] = MSB(reg);
buf[1] = LSB(reg);
memcpy(buf + 2, data, len);
#include "stv090x.h"
#include "stv090x_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static unsigned int verbose;
module_param(verbose, int, 0644);
{
const struct stv090x_config *config = state->config;
int ret;
- u8 buf[2 + count];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg i2c_msg = { .addr = config->address, .flags = 0, .buf = buf, .len = 2 + count };
+ if (2 + count > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, count);
+ return -EINVAL;
+ }
+
buf[0] = reg >> 8;
buf[1] = reg & 0xff;
memcpy(&buf[2], data, count);
#include "stv6110.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static int debug;
struct stv6110_priv {
{
struct stv6110_priv *priv = fe->tuner_priv;
int rc;
- u8 cmdbuf[len + 1];
+ u8 cmdbuf[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = priv->i2c_address,
.flags = 0,
dprintk("%s\n", __func__);
+ if (1 + len > sizeof(cmdbuf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr: len=%d is too big!\n",
+ KBUILD_MODNAME, len);
+ return -EINVAL;
+ }
+
if (start + len > 8)
return -EINVAL;
#include "stv6110x.h"
#include "stv6110x_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static unsigned int verbose;
module_param(verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Set Verbosity level");
{
int ret;
const struct stv6110x_config *config = stv6110x->config;
- u8 buf[len + 1];
+ u8 buf[MAX_XFER_SIZE];
+
struct i2c_msg msg = {
.addr = config->addr,
.flags = 0,
.len = len + 1
};
+ if (1 + len > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr: len=%d is too big!\n",
+ KBUILD_MODNAME, len);
+ return -EINVAL;
+ }
+
if (start + len > 8)
return -EINVAL;
#include "tda10071_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static struct dvb_frontend_ops tda10071_ops;
/* write multiple registers */
int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.demod_i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg.demod_i2c_addr,
}, {
.addr = priv->cfg.demod_i2c_addr,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = len,
.buf = buf,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
#include "dvb_frontend.h"
#include "tda18271c2dd.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct SStandardParam {
s32 m_IFFrequency;
u32 m_BandWidth;
static int WriteRegs(struct tda_state *state,
u8 SubAddr, u8 *Regs, u16 nRegs)
{
- u8 data[nRegs+1];
+ u8 data[MAX_XFER_SIZE];
+
+ if (1 + nRegs > sizeof(data)) {
+ printk(KERN_WARNING
+ "%s: i2c wr: len=%d is too big!\n",
+ KBUILD_MODNAME, nRegs);
+ return -EINVAL;
+ }
data[0] = SubAddr;
memcpy(data + 1, Regs, nRegs);
- return i2c_write(state->i2c, state->adr, data, nRegs+1);
+ return i2c_write(state->i2c, state->adr, data, nRegs + 1);
}
static int WriteReg(struct tda_state *state, u8 SubAddr, u8 Reg)
static int debug;
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
#define dprintk(args...) \
do { \
if (debug) \
const enum zl10039_reg_addr reg, const u8 *src,
const size_t count)
{
- u8 buf[count + 1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = state->i2c_addr,
.flags = 0,
.len = count + 1,
};
+ if (1 + count > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: i2c wr reg=%04x: len=%zd is too big!\n",
+ KBUILD_MODNAME, reg, count);
+ return -EINVAL;
+ }
+
dprintk("%s\n", __func__);
/* Write register address and data in one go */
buf[0] = reg;
/* Hauppauge card? get values from tveeprom */
void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
{
- struct i2c_client c;
+ struct i2c_client *c;
u8 eedata[256];
- memset(&c, 0, sizeof(c));
- strlcpy(c.name, "cx18 tveeprom tmp", sizeof(c.name));
- c.adapter = &cx->i2c_adap[0];
- c.addr = 0xA0 >> 1;
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
+
+ strlcpy(c->name, "cx18 tveeprom tmp", sizeof(c->name));
+ c->adapter = &cx->i2c_adap[0];
+ c->addr = 0xa0 >> 1;
memset(tv, 0, sizeof(*tv));
- if (tveeprom_read(&c, eedata, sizeof(eedata)))
- return;
+ if (tveeprom_read(c, eedata, sizeof(eedata)))
+ goto ret;
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
case CX18_CARD_HVR_1600_S5H1411:
- tveeprom_hauppauge_analog(&c, tv, eedata);
+ tveeprom_hauppauge_analog(c, tv, eedata);
break;
case CX18_CARD_YUAN_MPC718:
case CX18_CARD_GOTVIEW_PCI_DVD3:
cx18_eeprom_dump(cx, eedata, sizeof(eedata));
break;
}
+
+ret:
+ kfree(c);
}
static void cx18_process_eeprom(struct cx18 *cx)
#include "cx23885.h"
#include "cimax2.h"
#include "dvb_ca_en50221.h"
+
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/**** Bit definitions for MC417_RWD and MC417_OEN registers ***
bits 31-16
+-----------+
u8 *buf, int len)
{
int ret;
- u8 buffer[len + 1];
+ u8 buffer[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = addr,
.len = len + 1
};
+ if (1 + len > sizeof(buffer)) {
+ printk(KERN_WARNING
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buffer[0] = reg;
memcpy(&buffer[1], buf, len);
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
- * the project's page is at http://www.linuxtv.org/
+ * the project's page is at http://www.linuxtv.org/
*/
/* for debugging ARM communication: */
#define _NOHANDSHAKE
+/*
+ * Max transfer size done by av7110_fw_cmd()
+ *
+ * The maximum size passed to this function is 6 bytes. The buffer also
+ * uses two additional ones for type and size. So, 8 bytes is enough.
+ */
+#define MAX_XFER_SIZE 8
+
/****************************************************************************
* DEBI functions
****************************************************************************/
int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...)
{
va_list args;
- u16 buf[num + 2];
+ u16 buf[MAX_XFER_SIZE];
int i, ret;
// dprintk(4, "%p\n", av7110);
+ if (2 + num > sizeof(buf)) {
+ printk(KERN_WARNING
+ "%s: %s len=%d is too big!\n",
+ KBUILD_MODNAME, __func__, num);
+ return -EINVAL;
+ }
+
buf[0] = ((type << 8) | com);
buf[1] = num;
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 && VIRT_TO_BUS
+ depends on !ALPHA
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_data/camera-rcar.h>
cancel_work_sync(&shark->led_work);
}
+#ifdef CONFIG_PM
static void shark_resume_leds(struct shark_device *shark)
{
if (test_bit(BLUE_IS_PULSE, &shark->brightness_new))
set_bit(RED_LED, &shark->brightness_new);
schedule_work(&shark->led_work);
}
+#endif
#else
static int shark_register_leds(struct shark_device *shark, struct device *dev)
{
cancel_work_sync(&shark->led_work);
}
+#ifdef CONFIG_PM
static void shark_resume_leds(struct shark_device *shark)
{
int i;
schedule_work(&shark->led_work);
}
+#endif
#else
static int shark_register_leds(struct shark_device *shark, struct device *dev)
{
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
/*
* si470x_i2c_suspend - suspend the device
*/
.driver = {
.name = "si470x",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.pm = &si470x_i2c_pm,
#endif
},
#define WM_SUB_TEST 0xF
/* Different modes of the MSA register */
-#define MODE_BUFFER 0x0
-#define MODE_PRESET 0x1
-#define MODE_SEARCH 0x2
-#define MODE_AF_UPDATE 0x3
-#define MODE_JUMP 0x4
-#define MODE_CHECK 0x5
-#define MODE_LOAD 0x6
-#define MODE_END 0x7
-#define MODE_SHIFT 5
+#define MSA_MODE_BUFFER 0x0
+#define MSA_MODE_PRESET 0x1
+#define MSA_MODE_SEARCH 0x2
+#define MSA_MODE_AF_UPDATE 0x3
+#define MSA_MODE_JUMP 0x4
+#define MSA_MODE_CHECK 0x5
+#define MSA_MODE_LOAD 0x6
+#define MSA_MODE_END 0x7
+#define MSA_MODE_SHIFT 5
struct tef6862_state {
struct v4l2_subdev sd;
clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ);
pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
- i2cmsg[0] = (MODE_PRESET << MODE_SHIFT) | WM_SUB_PLLM;
+ i2cmsg[0] = (MSA_MODE_PRESET << MSA_MODE_SHIFT) | WM_SUB_PLLM;
i2cmsg[1] = (pll >> 8) & 0xff;
i2cmsg[2] = pll & 0xff;
} tx;
/* Config register index/data port pair */
- u8 cr_ip;
- u8 cr_dp;
+ u32 cr_ip;
+ u32 cr_dp;
/* hardware I/O settings */
unsigned long cir_addr;
cycles = DIV_ROUND_CLOSEST(24000000, carrier * 2) -
ir->cycle_overhead;
- /* make up the the remainer of 4-cycle blocks */
- switch (cycles & 3) {
- case 0:
- sevens = 0;
- break;
- case 1:
- sevens = 3;
- break;
- case 2:
- sevens = 2;
- break;
- case 3:
- sevens = 1;
- break;
- }
-
+ /*
+ * Calculate minimum number of 7 cycles needed so
+ * we are left with a multiple of 4; so we want to have
+ * (sevens * 7) & 3 == cycles & 3
+ */
+ sevens = (4 - cycles) & 3;
fours = (cycles - sevens * 7) / 4;
/* magic happens here */
} tx;
/* EFER Config register index/data pair */
- u8 cr_efir;
- u8 cr_efdr;
+ u32 cr_efir;
+ u32 cr_efdr;
/* hardware I/O settings */
unsigned long cir_addr;
#include "e4000_priv.h"
#include <linux/math64.h>
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple registers */
static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[1 + len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg->i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
static int e4000_rd_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg->i2c_addr,
}, {
.addr = priv->cfg->i2c_addr,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = len,
.buf = buf,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c rd reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
#include "fc2580_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/*
* TODO:
* I2C write and read works only for one single register. Multiple registers
static int fc2580_wr_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[1 + len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg->i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
static int fc2580_rd_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg->i2c_addr,
}, {
.addr = priv->cfg->i2c_addr,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = len,
.buf = buf,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c rd reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
#include "tda18212.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct tda18212_priv {
struct tda18212_config *cfg;
struct i2c_adapter *i2c;
int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg->i2c_address,
.flags = 0,
- .len = sizeof(buf),
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg->i2c_address,
}, {
.addr = priv->cfg->i2c_address,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = len,
.buf = buf,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c rd reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
#include "tda18218_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple registers */
static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
{
int ret = 0, len2, remaining;
- u8 buf[1 + len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg->i2c_address,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
for (remaining = len; remaining > 0;
remaining -= (priv->cfg->i2c_wr_max - 1)) {
len2 = remaining;
static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
{
int ret;
- u8 buf[reg+len]; /* we must start read always from reg 0x00 */
+ u8 buf[MAX_XFER_SIZE]; /* we must start read always from reg 0x00 */
struct i2c_msg msg[2] = {
{
.addr = priv->cfg->i2c_address,
}, {
.addr = priv->cfg->i2c_address,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = reg + len,
.buf = buf,
}
};
+ if (reg + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, &buf[reg], len);
unsigned char buf[1];
int rc;
- memset(buf,0,sizeof(buf));
- if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,buf,1)))
+ rc = tuner_i2c_xfer_recv(&priv->i2c_props, buf, 1);
+ if (rc != 1)
tuner_info("i2c i/o error: rc == %d (should be 1)\n", rc);
dump_read_message(fe, buf);
return 0;
#include <linux/dvb/frontend.h>
#include "dvb_frontend.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 80
+
/* Registers (Write-only) */
#define XREG_INIT 0x00
#define XREG_RF_FREQ 0x02
{
struct xc2028_data *priv = fe->tuner_priv;
int pos, rc;
- unsigned char *p, *endp, buf[priv->ctrl.max_len];
+ unsigned char *p, *endp, buf[MAX_XFER_SIZE];
+
+ if (priv->ctrl.max_len > sizeof(buf))
+ priv->ctrl.max_len = sizeof(buf);
tuner_dbg("%s called\n", __func__);
return ret;
}
+#define AF9015_EEPROM_SIZE 256
+
/* hash (and dump) eeprom */
static int af9015_eeprom_hash(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret, i;
- static const unsigned int AF9015_EEPROM_SIZE = 256;
u8 buf[AF9015_EEPROM_SIZE];
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL};
#include "af9035.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static u16 af9035_checksum(const u8 *buf, size_t len)
/* write multiple registers */
static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len)
{
- u8 wbuf[6 + len];
+ u8 wbuf[MAX_XFER_SIZE];
u8 mbox = (reg >> 16) & 0xff;
struct usb_req req = { CMD_MEM_WR, mbox, sizeof(wbuf), wbuf, 0, NULL };
+ if (6 + len > sizeof(wbuf)) {
+ dev_warn(&d->udev->dev, "%s: i2c wr: len=%d is too big!\n",
+ KBUILD_MODNAME, len);
+ return -EOPNOTSUPP;
+ }
+
wbuf[0] = len;
wbuf[1] = 2;
wbuf[2] = 0;
msg[1].len);
} else {
/* I2C */
- u8 buf[5 + msg[0].len];
+ u8 buf[MAX_XFER_SIZE];
struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf),
buf, msg[1].len, msg[1].buf };
+
+ if (5 + msg[0].len > sizeof(buf)) {
+ dev_warn(&d->udev->dev,
+ "%s: i2c xfer: len=%d is too big!\n",
+ KBUILD_MODNAME, msg[0].len);
+ return -EOPNOTSUPP;
+ }
req.mbox |= ((msg[0].addr & 0x80) >> 3);
buf[0] = msg[1].len;
buf[1] = msg[0].addr << 1;
msg[0].len - 3);
} else {
/* I2C */
- u8 buf[5 + msg[0].len];
+ u8 buf[MAX_XFER_SIZE];
struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf,
0, NULL };
+
+ if (5 + msg[0].len > sizeof(buf)) {
+ dev_warn(&d->udev->dev,
+ "%s: i2c xfer: len=%d is too big!\n",
+ KBUILD_MODNAME, msg[0].len);
+ return -EOPNOTSUPP;
+ }
req.mbox |= ((msg[0].addr & 0x80) >> 3);
buf[0] = msg[0].len;
buf[1] = msg[0].addr << 1;
#include "lgdt3305.h"
#include "lg2160.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
int dvb_usb_mxl111sf_debug;
module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level "
{
int wo = (rbuf == NULL || rlen == 0); /* write-only */
int ret;
- u8 sndbuf[1+wlen];
+ u8 sndbuf[MAX_XFER_SIZE];
+
+ if (1 + wlen > sizeof(sndbuf)) {
+ pr_warn("%s: len=%d is too big!\n", __func__, wlen);
+ return -EOPNOTSUPP;
+ }
pr_debug("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
#include "lgs8gxx.h"
#include "atbm8830.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* debug */
static int dvb_usb_cxusb_debug;
module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
{
int wo = (rbuf == NULL || rlen == 0); /* write-only */
- u8 sndbuf[1+wlen];
+ u8 sndbuf[MAX_XFER_SIZE];
+
+ if (1 + wlen > sizeof(sndbuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ wlen);
+ return -EOPNOTSUPP;
+ }
+
memset(sndbuf, 0, 1+wlen);
sndbuf[0] = cmd;
if (msg[i].flags & I2C_M_RD) {
/* read only */
- u8 obuf[3], ibuf[1+msg[i].len];
+ u8 obuf[3], ibuf[MAX_XFER_SIZE];
+
+ if (1 + msg[i].len > sizeof(ibuf)) {
+ warn("i2c rd: len=%d is too big!\n",
+ msg[i].len);
+ return -EOPNOTSUPP;
+ }
obuf[0] = 0;
obuf[1] = msg[i].len;
obuf[2] = msg[i].addr;
} else if (i+1 < num && (msg[i+1].flags & I2C_M_RD) &&
msg[i].addr == msg[i+1].addr) {
/* write to then read from same address */
- u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len];
+ u8 obuf[MAX_XFER_SIZE], ibuf[MAX_XFER_SIZE];
+
+ if (3 + msg[i].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[i].len);
+ return -EOPNOTSUPP;
+ }
+ if (1 + msg[i + 1].len > sizeof(ibuf)) {
+ warn("i2c rd: len=%d is too big!\n",
+ msg[i + 1].len);
+ return -EOPNOTSUPP;
+ }
obuf[0] = msg[i].len;
obuf[1] = msg[i+1].len;
obuf[2] = msg[i].addr;
i++;
} else {
/* write only */
- u8 obuf[2+msg[i].len], ibuf;
+ u8 obuf[MAX_XFER_SIZE], ibuf;
+
+ if (2 + msg[i].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[i].len);
+ return -EOPNOTSUPP;
+ }
obuf[0] = msg[i].addr;
obuf[1] = msg[i].len;
memcpy(&obuf[2], msg[i].buf, msg[i].len);
#include <linux/kconfig.h>
#include "dibusb.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS);
static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
- u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
+ u8 sndbuf[MAX_XFER_SIZE]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
/* write only ? */
int wo = (rbuf == NULL || rlen == 0),
len = 2 + wlen + (wo ? 0 : 2);
+ if (4 + wlen > sizeof(sndbuf)) {
+ warn("i2c wr: len=%d is too big!\n", wlen);
+ return -EOPNOTSUPP;
+ }
+
sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
sndbuf[1] = (addr << 1) | (wo ? 0 : 1);
#include "stb6100_proc.h"
#include "m88rs2000.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
#ifndef USB_PID_DW2102
#define USB_PID_DW2102 0x2102
#endif
case 2: {
/* read */
/* first write first register number */
- u8 ibuf[msg[1].len + 2], obuf[3];
+ u8 ibuf[MAX_XFER_SIZE], obuf[3];
+
+ if (2 + msg[1].len > sizeof(ibuf)) {
+ warn("i2c rd: len=%d is too big!\n",
+ msg[1].len);
+ return -EOPNOTSUPP;
+ }
+
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
obuf[2] = msg[0].buf[0];
switch (msg[0].addr) {
case 0x68: {
/* write to register */
- u8 obuf[msg[0].len + 2];
+ u8 obuf[MAX_XFER_SIZE];
+
+ if (2 + msg[0].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[1].len);
+ return -EOPNOTSUPP;
+ }
+
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
memcpy(obuf + 2, msg[0].buf, msg[0].len);
}
case 0x61: {
/* write to tuner */
- u8 obuf[msg[0].len + 2];
+ u8 obuf[MAX_XFER_SIZE];
+
+ if (2 + msg[0].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[1].len);
+ return -EOPNOTSUPP;
+ }
+
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
memcpy(obuf + 2, msg[0].buf, msg[0].len);
default: {
if (msg[j].flags == I2C_M_RD) {
/* read registers */
- u8 ibuf[msg[j].len + 2];
+ u8 ibuf[MAX_XFER_SIZE];
+
+ if (2 + msg[j].len > sizeof(ibuf)) {
+ warn("i2c rd: len=%d is too big!\n",
+ msg[j].len);
+ return -EOPNOTSUPP;
+ }
+
dw210x_op_rw(d->udev, 0xc3,
(msg[j].addr << 1) + 1, 0,
ibuf, msg[j].len + 2,
} while (len > 0);
} else {
/* write registers */
- u8 obuf[msg[j].len + 2];
+ u8 obuf[MAX_XFER_SIZE];
+
+ if (2 + msg[j].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[j].len);
+ return -EOPNOTSUPP;
+ }
+
obuf[0] = msg[j].addr << 1;
obuf[1] = msg[j].len;
memcpy(obuf + 2, msg[j].buf, msg[j].len);
case 2: {
/* read */
/* first write first register number */
- u8 ibuf[msg[1].len + 2], obuf[3];
+ u8 ibuf[MAX_XFER_SIZE], obuf[3];
+
+ if (2 + msg[1].len > sizeof(ibuf)) {
+ warn("i2c rd: len=%d is too big!\n",
+ msg[1].len);
+ return -EOPNOTSUPP;
+ }
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
obuf[2] = msg[0].buf[0];
case 0x60:
case 0x0c: {
/* write to register */
- u8 obuf[msg[0].len + 2];
+ u8 obuf[MAX_XFER_SIZE];
+
+ if (2 + msg[0].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[0].len);
+ return -EOPNOTSUPP;
+ }
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
memcpy(obuf + 2, msg[0].buf, msg[0].len);
default: {
if (msg[j].flags == I2C_M_RD) {
/* read registers */
- u8 ibuf[msg[j].len];
+ u8 ibuf[MAX_XFER_SIZE];
+
+ if (msg[j].len > sizeof(ibuf)) {
+ warn("i2c rd: len=%d is too big!\n",
+ msg[j].len);
+ return -EOPNOTSUPP;
+ }
+
dw210x_op_rw(d->udev, 0x91, 0, 0,
ibuf, msg[j].len,
DW210X_READ_MSG);
} while (len > 0);
} else if (j < (num - 1)) {
/* write register addr before read */
- u8 obuf[msg[j].len + 2];
+ u8 obuf[MAX_XFER_SIZE];
+
+ if (2 + msg[j].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[j].len);
+ return -EOPNOTSUPP;
+ }
+
obuf[0] = msg[j + 1].len;
obuf[1] = (msg[j].addr << 1);
memcpy(obuf + 2, msg[j].buf, msg[j].len);
break;
} else {
/* write registers */
- u8 obuf[msg[j].len + 2];
+ u8 obuf[MAX_XFER_SIZE];
+
+ if (2 + msg[j].len > sizeof(obuf)) {
+ warn("i2c wr: len=%d is too big!\n",
+ msg[j].len);
+ return -EOPNOTSUPP;
+ }
obuf[0] = msg[j].len + 1;
obuf[1] = (msg[j].addr << 1);
memcpy(obuf + 2, msg[j].buf, msg[j].len);
stream->dev->name,
sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
y, ts.tv_sec, ts.tv_nsec / NSEC_PER_USEC,
- v4l2_buf->timestamp.tv_sec, v4l2_buf->timestamp.tv_usec,
+ v4l2_buf->timestamp.tv_sec,
+ (unsigned long)v4l2_buf->timestamp.tv_usec,
x1, first->host_sof, first->dev_sof,
x2, last->host_sof, last->dev_sof, y1, y2);
struct v4l2_subdev *sd, *tmp;
unsigned int notif_n_subdev = notifier->num_subdevs;
unsigned int n_subdev = min(notif_n_subdev, V4L2_MAX_SUBDEVS);
- struct device *dev[n_subdev];
+ struct device **dev;
int i = 0;
if (!notifier->v4l2_dev)
return;
+ dev = kmalloc(n_subdev * sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ dev_err(notifier->v4l2_dev->dev,
+ "Failed to allocate device cache!\n");
+ }
+
mutex_lock(&list_lock);
list_del(¬ifier->list);
list_for_each_entry_safe(sd, tmp, ¬ifier->done, async_list) {
- dev[i] = get_device(sd->dev);
+ struct device *d;
+
+ d = get_device(sd->dev);
v4l2_async_cleanup(sd);
/* If we handled USB devices, we'd have to lock the parent too */
- device_release_driver(dev[i++]);
+ device_release_driver(d);
if (notifier->unbind)
notifier->unbind(notifier, sd, sd->asd);
+
+ /*
+ * Store device at the device cache, in order to call
+ * put_device() on the final step
+ */
+ if (dev)
+ dev[i++] = d;
+ else
+ put_device(d);
}
mutex_unlock(&list_lock);
+ /*
+ * Call device_attach() to reprobe devices
+ *
+ * NOTE: If dev allocation fails, i is 0, and the whole loop won't be
+ * executed.
+ */
while (i--) {
struct device *d = dev[i];
}
put_device(d);
}
+ kfree(dev);
notifier->v4l2_dev = NULL;
pr_warn("ignoring spike: %d %d %lx %lx %lx %lx\n",
dcd, sense,
tv.tv_sec, lasttv.tv_sec,
- tv.tv_usec, lasttv.tv_usec);
+ (unsigned long)tv.tv_usec,
+ (unsigned long)lasttv.tv_usec);
continue;
}
pr_warn("%d %d %lx %lx %lx %lx\n",
dcd, sense,
tv.tv_sec, lasttv.tv_sec,
- tv.tv_usec, lasttv.tv_usec);
+ (unsigned long)tv.tv_usec,
+ (unsigned long)lasttv.tv_usec);
data = PULSE_MASK;
} else if (deltv > 15) {
data = PULSE_MASK; /* really long time */
pr_warn("AIEEEE: %d %d %lx %lx %lx %lx\n",
dcd, sense,
tv.tv_sec, lasttv.tv_sec,
- tv.tv_usec, lasttv.tv_usec);
+ (unsigned long)tv.tv_usec,
+ (unsigned long)lasttv.tv_usec);
/*
* detecting pulse while this
* MUST be a space!
#include <media/lirc_dev.h>
#include <media/lirc.h>
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct IR;
struct IR_rx {
schedule();
set_current_state(TASK_INTERRUPTIBLE);
} else {
- unsigned char buf[rbuf->chunk_size];
+ unsigned char buf[MAX_XFER_SIZE];
+
+ if (rbuf->chunk_size > sizeof(buf)) {
+ zilog_error("chunk_size is too big (%d)!\n",
+ rbuf->chunk_size);
+ ret = -EINVAL;
+ break;
+ }
m = lirc_buffer_read(rbuf, buf);
if (m == rbuf->chunk_size) {
ret = copy_to_user((void *)outbuf+written, buf,
projects / cascardo / linux.git / commitdiff