dm raid: add discard support for RAID levels 4, 5 and 6
authorHeinz Mauelshagen <heinzm@redhat.com>
Wed, 24 Sep 2014 15:47:19 +0000 (17:47 +0200)
committerMike Snitzer <snitzer@redhat.com>
Mon, 6 Oct 2014 00:03:36 +0000 (20:03 -0400)
In case of RAID levels 4, 5 and 6 we have to verify each RAID members'
ability to zero data on discards to avoid stripe data corruption -- if
discard_zeroes_data is not set for each RAID member discard support must
be disabled.  But given the uncertainty of whether or not a RAID member
properly supports zeroing data on discard we require the user to
explicitly allow discard support on RAID levels 4, 5, and 6 by setting
a dm-raid module paramter, e.g.: dm-raid.devices_handle_discard_safely=Y
Otherwise, discards could cause data corruption on RAID4/5/6.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
drivers/md/dm-raid.c

index 030e2d6..4857fa4 100644 (file)
@@ -18,6 +18,8 @@
 
 #define DM_MSG_PREFIX "raid"
 
+static bool devices_handle_discard_safely = false;
+
 /*
  * The following flags are used by dm-raid.c to set up the array state.
  * They must be cleared before md_run is called.
@@ -475,6 +477,8 @@ too_many:
  *                                      will form the "stripe"
  *    [[no]sync]                       Force or prevent recovery of the
  *                                      entire array
+ *    [devices_handle_discard_safely]  Allow discards on RAID4/5/6; useful if RAID
+ *                                     member device(s) properly support TRIM/UNMAP
  *    [rebuild <idx>]                  Rebuild the drive indicated by the index
  *    [daemon_sleep <ms>]              Time between bitmap daemon work to
  *                                      clear bits
@@ -1150,23 +1154,45 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
 }
 
 /*
- * Enable/disable discard support on RAID set depending on RAID level.
+ * Enable/disable discard support on RAID set depending on
+ * RAID level and discard properties of underlying RAID members.
  */
 static void configure_discard_support(struct dm_target *ti, struct raid_set *rs)
 {
+       int i;
+       bool raid456;
+
        /* Assume discards not supported until after checks below. */
        ti->discards_supported = false;
 
        /* RAID level 4,5,6 require discard_zeroes_data for data integrity! */
-       if (rs->md.level == 4 || rs->md.level == 5 || rs->md.level == 6)
-               return; /* discard_zeroes_data cannot be trusted as reliable */
+       raid456 = (rs->md.level == 4 || rs->md.level == 5 || rs->md.level == 6);
 
+       for (i = 0; i < rs->md.raid_disks; i++) {
+               struct request_queue *q = bdev_get_queue(rs->dev[i].rdev.bdev);
+
+               if (!q || !blk_queue_discard(q))
+                       return;
+
+               if (raid456) {
+                       if (!q->limits.discard_zeroes_data)
+                               return;
+                       if (!devices_handle_discard_safely) {
+                               DMERR("raid456 discard support disabled due to discard_zeroes_data uncertainty.");
+                               DMERR("Set dm-raid.devices_handle_discard_safely=Y to override.");
+                               return;
+                       }
+               }
+       }
+
+       /* All RAID members properly support discards */
        ti->discards_supported = true;
 
        /*
         * RAID1 and RAID10 personalities require bio splitting,
+        * RAID0/4/5/6 don't and process large discard bios properly.
         */
-       ti->split_discard_bios = true;
+       ti->split_discard_bios = !!(rs->md.level == 1 || rs->md.level == 10);
        ti->num_discard_bios = 1;
 }
 
@@ -1709,6 +1735,10 @@ static void __exit dm_raid_exit(void)
 module_init(dm_raid_init);
 module_exit(dm_raid_exit);
 
+module_param(devices_handle_discard_safely, bool, 0644);
+MODULE_PARM_DESC(devices_handle_discard_safely,
+                "Set to Y if all devices in each array reliably return zeroes on reads from discarded regions");
+
 MODULE_DESCRIPTION(DM_NAME " raid4/5/6 target");
 MODULE_ALIAS("dm-raid1");
 MODULE_ALIAS("dm-raid10");