config BF_REV_0_1
bool "0.1"
- depends on (BF51x || BF52x || (BF54x && !BF54xM))
+ depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
config BF_REV_0_2
bool "0.2"
+++ /dev/null
-/*
- * Analog Devices SPI3 controller driver
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPI_CHANNEL_H_
-#define _SPI_CHANNEL_H_
-
-#include <linux/types.h>
-
-/* SPI_CONTROL */
-#define SPI_CTL_EN 0x00000001 /* Enable */
-#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */
-#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */
-#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */
-#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */
-#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */
-#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */
-#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */
-#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */
-#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */
-#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */
-#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */
-#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */
-#define SPI_CTL_LSBF 0x00001000 /* LSB First */
-#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */
-#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */
-#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */
-#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */
-#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */
-#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
-#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
-#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */
-#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */
-#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */
-#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */
-#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */
-#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */
-/* SPI_RX_CONTROL */
-#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */
-#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */
-#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */
-#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */
-#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */
-#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */
-#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */
-#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */
-#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */
-#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */
-#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */
-#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */
-#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */
-#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */
-#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */
-#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */
-#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */
-#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */
-#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */
-#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */
-#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */
-#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */
-/* SPI_TX_CONTROL */
-#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */
-#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */
-#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */
-#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */
-#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */
-#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */
-#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */
-#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */
-#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */
-#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */
-#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */
-#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */
-#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */
-#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */
-#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */
-#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */
-#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */
-#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */
-#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */
-#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */
-#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */
-#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */
-/* SPI_CLOCK */
-#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */
-/* SPI_DELAY */
-#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */
-#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */
-#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */
-/* SPI_SSEL */
-#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */
-#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */
-#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */
-#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */
-#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */
-#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */
-#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */
-#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */
-#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */
-#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */
-#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */
-#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */
-#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */
-#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */
-/* SPI_RWC */
-#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */
-/* SPI_RWCR */
-#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */
-/* SPI_TWC */
-#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */
-/* SPI_TWCR */
-#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */
-/* SPI_IMASK */
-#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */
-#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
-/* SPI_IMASKCL */
-#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */
-#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
-/* SPI_IMASKST */
-#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */
-#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
-/* SPI_STATUS */
-#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */
-#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */
-#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */
-#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */
-#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */
-#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */
-#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */
-#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */
-#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */
-#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */
-#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */
-#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */
-#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */
-#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */
-#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */
-#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */
-#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */
-#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */
-#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */
-#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */
-#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */
-#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */
-#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */
-#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */
-#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */
-#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */
-/* SPI_ILAT */
-#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */
-#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */
-#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */
-#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */
-#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */
-#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */
-#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */
-#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */
-#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */
-#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */
-/* SPI_ILATCL */
-#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */
-#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */
-#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */
-#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */
-#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */
-#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */
-#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */
-#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */
-#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */
-#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */
-
-/*
- * bfin spi3 registers layout
- */
-struct bfin_spi_regs {
- u32 revid;
- u32 control;
- u32 rx_control;
- u32 tx_control;
- u32 clock;
- u32 delay;
- u32 ssel;
- u32 rwc;
- u32 rwcr;
- u32 twc;
- u32 twcr;
- u32 reserved0;
- u32 emask;
- u32 emaskcl;
- u32 emaskst;
- u32 reserved1;
- u32 status;
- u32 elat;
- u32 elatcl;
- u32 reserved2;
- u32 rfifo;
- u32 reserved3;
- u32 tfifo;
-};
-
-#define MAX_CTRL_CS 8 /* cs in spi controller */
-
-/* device.platform_data for SSP controller devices */
-struct bfin6xx_spi_master {
- u16 num_chipselect;
- u16 pin_req[7];
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct bfin6xx_spi_chip {
- u32 control;
- u16 cs_chg_udelay; /* Some devices require 16-bit delays */
- u32 tx_dummy_val; /* tx value for rx only transfer */
- bool enable_dma;
-};
-
-#endif /* _SPI_CHANNEL_H_ */
--- /dev/null
+/*
+ * Analog Devices SPI3 controller driver
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPI_CHANNEL_H_
+#define _SPI_CHANNEL_H_
+
+#include <linux/types.h>
+
+/* SPI_CONTROL */
+#define SPI_CTL_EN 0x00000001 /* Enable */
+#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */
+#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */
+#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */
+#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */
+#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */
+#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */
+#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */
+#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */
+#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */
+#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */
+#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */
+#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */
+#define SPI_CTL_LSBF 0x00001000 /* LSB First */
+#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */
+#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */
+#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */
+#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */
+#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */
+#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
+#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
+#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */
+#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */
+#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */
+#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */
+#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */
+#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */
+/* SPI_RX_CONTROL */
+#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */
+#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */
+#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */
+#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */
+#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */
+#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */
+#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */
+#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */
+#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */
+#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */
+#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */
+#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */
+#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */
+#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */
+#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */
+#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */
+#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */
+#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */
+#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */
+#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */
+#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */
+#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */
+/* SPI_TX_CONTROL */
+#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */
+#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */
+#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */
+#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */
+#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */
+#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */
+#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */
+#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */
+#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */
+#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */
+#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */
+#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */
+#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */
+#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */
+#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */
+#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */
+#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */
+#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */
+#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */
+#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */
+#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */
+#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */
+/* SPI_CLOCK */
+#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */
+/* SPI_DELAY */
+#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */
+#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */
+#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */
+/* SPI_SSEL */
+#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */
+#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */
+#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */
+#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */
+#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */
+#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */
+#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */
+#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */
+#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */
+#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */
+#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */
+#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */
+#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */
+#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */
+/* SPI_RWC */
+#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */
+/* SPI_RWCR */
+#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */
+/* SPI_TWC */
+#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */
+/* SPI_TWCR */
+#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */
+/* SPI_IMASK */
+#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */
+#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
+/* SPI_IMASKCL */
+#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */
+#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
+/* SPI_IMASKST */
+#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */
+#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
+/* SPI_STATUS */
+#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */
+#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */
+#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */
+#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */
+#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */
+#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */
+#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */
+#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */
+#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */
+#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */
+#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */
+#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */
+#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */
+#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */
+#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */
+#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */
+#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */
+#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */
+#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */
+#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */
+#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */
+#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */
+#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */
+#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */
+#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */
+#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */
+/* SPI_ILAT */
+#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */
+#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */
+#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */
+#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */
+#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */
+#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */
+#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */
+#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */
+#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */
+#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */
+/* SPI_ILATCL */
+#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */
+#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */
+#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */
+#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */
+#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */
+#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */
+#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */
+#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */
+#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */
+#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */
+
+/*
+ * bfin spi3 registers layout
+ */
+struct bfin_spi_regs {
+ u32 revid;
+ u32 control;
+ u32 rx_control;
+ u32 tx_control;
+ u32 clock;
+ u32 delay;
+ u32 ssel;
+ u32 rwc;
+ u32 rwcr;
+ u32 twc;
+ u32 twcr;
+ u32 reserved0;
+ u32 emask;
+ u32 emaskcl;
+ u32 emaskst;
+ u32 reserved1;
+ u32 status;
+ u32 elat;
+ u32 elatcl;
+ u32 reserved2;
+ u32 rfifo;
+ u32 reserved3;
+ u32 tfifo;
+};
+
+#define MAX_CTRL_CS 8 /* cs in spi controller */
+
+/* device.platform_data for SSP controller devices */
+struct bfin_spi3_master {
+ u16 num_chipselect;
+ u16 pin_req[7];
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct bfin_spi3_chip {
+ u32 control;
+ u16 cs_chg_udelay; /* Some devices require 16-bit delays */
+ u32 tx_dummy_val; /* tx value for rx only transfer */
+ bool enable_dma;
+};
+
+#endif /* _SPI_CHANNEL_H_ */
#include <linux/ptrace.h> /* for linux pt_regs struct */
#include <linux/kgdb.h>
#include <linux/uaccess.h>
+#include <asm/irq_regs.h>
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
SSYNC();
/* We are done with local CPU inits, unblock the boot CPU. */
- set_cpu_online(cpu, true);
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
SSYNC();
}
- timeout = jiffies + 1 * HZ;
+ timeout = jiffies + HZ;
+ /* release the lock and let coreb run */
+ spin_unlock(&boot_lock);
while (time_before(jiffies, timeout)) {
if (cpu_online(cpu))
break;
}
if (cpu_online(cpu)) {
- /* release the lock and let coreb run */
- spin_unlock(&boot_lock);
return 0;
} else
panic("CPU%u: processor failed to boot\n", cpu);
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/usb/musb.h>
-#include <asm/bfin6xx_spi.h>
+#include <asm/bfin_spi3.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
static unsigned short pins[] = P_RMII0;
static struct stmmac_mdio_bus_data phy_private_data = {
- .bus_id = 0,
.phy_mask = 1,
};
.type = "w25q32",
};
-static struct bfin6xx_spi_chip spi_flash_chip_info = {
+static struct bfin_spi3_chip spi_flash_chip_info = {
.enable_dma = true, /* use dma transfer with this chip*/
};
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin6xx_spi_chip spidev_chip_info = {
+static struct bfin_spi3_chip spidev_chip_info = {
.enable_dma = true,
};
#endif
},
#endif
};
-#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
{
};
/* SPI controller data */
-static struct bfin6xx_spi_master bf60x_spi_master_info0 = {
+static struct bfin_spi3_master bf60x_spi_master_info0 = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bf60x_spi_master0 = {
- .name = "bfin-spi",
+ .name = "bfin-spi3",
.id = 0, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
},
};
-static struct bfin6xx_spi_master bf60x_spi_master_info1 = {
+static struct bfin_spi3_master bf60x_spi_master_info1 = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};
static struct platform_device bf60x_spi_master1 = {
- .name = "bfin-spi",
+ .name = "bfin-spi3",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
.resource = bfin_spi1_resource,
&bfin_sdh_device,
#endif
-#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
&bf60x_spi_master0,
&bf60x_spi_master1,
#endif
struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
enum ipi_message_type {
+ BFIN_IPI_NONE,
BFIN_IPI_TIMER,
BFIN_IPI_RESCHEDULE,
BFIN_IPI_CALL_FUNC,
/* Simple FIFO buffer, overflow leads to panic */
struct ipi_data {
- unsigned long count;
- unsigned long bits;
+ atomic_t count;
+ atomic_t bits;
};
static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
platform_clear_ipi(cpu, IRQ_SUPPLE_1);
bfin_ipi_data = &__get_cpu_var(bfin_ipi);
- smp_mb();
while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) {
msg = 0;
do {
ipi_cpu_stop(cpu);
break;
}
+ atomic_dec(&bfin_ipi_data->count);
} while (msg < BITS_PER_LONG);
-
- smp_mb();
}
return IRQ_HANDLED;
}
unsigned long flags;
local_irq_save(flags);
- smp_mb();
for_each_cpu(cpu, cpumask) {
bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
- smp_mb();
- set_bit(msg, &bfin_ipi_data->bits);
- bfin_ipi_data->count++;
+ atomic_set_mask((1 << msg), &bfin_ipi_data->bits);
+ atomic_inc(&bfin_ipi_data->count);
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
}
setup_secondary(cpu);
platform_secondary_init(cpu);
-
/* setup local core timer */
bfin_local_timer_setup();
*/
calibrate_delay();
+ /* We are done with local CPU inits, unblock the boot CPU. */
+ set_cpu_online(cpu, true);
cpu_startup_entry(CPUHP_ONLINE);
}
projects / cascardo / linux.git / commitdiff