pata_hpt37x: coding style cleanup
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Tue, 28 Dec 2010 20:09:27 +0000 (23:09 +0300)
committerJeff Garzik <jgarzik@redhat.com>
Sat, 8 Jan 2011 03:33:30 +0000 (22:33 -0500)
Fix 12 errors and 15 warnings given by checkpatch.pl:

- *switch* and *case* not on the same indentation level;

- no space between *for*/*switch*/*while* and open parenthesis;

- space between an unary operator and its operand;

- drive blacklist arrays not being *const*;

- spaces before tabs;

- lines over 80 characters.

In addition to these changes, also do the following:

- add new line after variable definitions;

- fix the style of some multi-line comments.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/pata_hpt37x.c

index 9c62951..9e2c984 100644 (file)
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt37x"
-#define DRV_VERSION    "0.6.16"
+#define DRV_VERSION    "0.6.17"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -210,7 +210,7 @@ static u32 hpt37x_find_mode(struct ata_port *ap, int speed)
 {
        struct hpt_clock *clocks = ap->host->private_data;
 
-       while(clocks->xfer_speed) {
+       while (clocks->xfer_speed) {
                if (clocks->xfer_speed == speed)
                        return clocks->timing;
                clocks++;
@@ -219,7 +219,8 @@ static u32 hpt37x_find_mode(struct ata_port *ap, int speed)
        return 0xffffffffU;     /* silence compiler warning */
 }
 
-static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[])
+static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
+                              const char * const list[])
 {
        unsigned char model_num[ATA_ID_PROD_LEN + 1];
        int i = 0;
@@ -237,18 +238,23 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
        return 0;
 }
 
-static const char *bad_ata33[] = {
-       "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
-       "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
-       "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+static const char * const bad_ata33[] = {
+       "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
+       "Maxtor 90845U3", "Maxtor 90650U2",
+       "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5",
+       "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+       "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6",
+       "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
        "Maxtor 90510D4",
        "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
-       "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
-       "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+       "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7",
+       "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+       "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5",
+       "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
        NULL
 };
 
-static const char *bad_ata100_5[] = {
+static const char * const bad_ata100_5[] = {
        "IBM-DTLA-307075",
        "IBM-DTLA-307060",
        "IBM-DTLA-307045",
@@ -389,6 +395,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
                { 0x50, 1, 0x04, 0x04 },
                { 0x54, 1, 0x04, 0x04 }
        };
+
        if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
                return -ENOENT;
 
@@ -673,12 +680,12 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev)
        u32 reg5c;
        int tries;
 
-       for(tries = 0; tries < 0x5000; tries++) {
+       for (tries = 0; tries < 0x5000; tries++) {
                udelay(50);
                pci_read_config_byte(dev, 0x5b, &reg5b);
                if (reg5b & 0x80) {
                        /* See if it stays set */
-                       for(tries = 0; tries < 0x1000; tries ++) {
+                       for (tries = 0; tries < 0x1000; tries++) {
                                pci_read_config_byte(dev, 0x5b, &reg5b);
                                /* Failed ? */
                                if ((reg5b & 0x80) == 0)
@@ -686,7 +693,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev)
                        }
                        /* Turn off tuning, we have the DPLL set */
                        pci_read_config_dword(dev, 0x5c, &reg5c);
-                       pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100);
+                       pci_write_config_dword(dev, 0x5c, reg5c & ~0x100);
                        return 1;
                }
        }
@@ -698,6 +705,7 @@ static u32 hpt374_read_freq(struct pci_dev *pdev)
 {
        u32 freq;
        unsigned long io_base = pci_resource_start(pdev, 4);
+
        if (PCI_FUNC(pdev->devfn) & 1) {
                struct pci_dev *pdev_0;
 
@@ -839,64 +847,68 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                if (rev == 6)
                        return -ENODEV;
 
-               switch(rev) {
-                       case 3:
-                               ppi[0] = &info_hpt370;
-                               chip_table = &hpt370;
-                               prefer_dpll = 0;
-                               break;
-                       case 4:
-                               ppi[0] = &info_hpt370a;
-                               chip_table = &hpt370a;
-                               prefer_dpll = 0;
-                               break;
-                       case 5:
-                               ppi[0] = &info_hpt372;
-                               chip_table = &hpt372;
-                               break;
-                       default:
-                               printk(KERN_ERR "pata_hpt37x: Unknown HPT366 "
-                                      "subtype, please report (%d).\n", rev);
-                               return -ENODEV;
+               switch (rev) {
+               case 3:
+                       ppi[0] = &info_hpt370;
+                       chip_table = &hpt370;
+                       prefer_dpll = 0;
+                       break;
+               case 4:
+                       ppi[0] = &info_hpt370a;
+                       chip_table = &hpt370a;
+                       prefer_dpll = 0;
+                       break;
+               case 5:
+                       ppi[0] = &info_hpt372;
+                       chip_table = &hpt372;
+                       break;
+               default:
+                       printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+                              "please report (%d).\n", rev);
+                       return -ENODEV;
                }
        } else {
-               switch(dev->device) {
-                       case PCI_DEVICE_ID_TTI_HPT372:
-                               /* 372N if rev >= 2 */
-                               if (rev >= 2)
-                                       return -ENODEV;
-                               ppi[0] = &info_hpt372;
-                               chip_table = &hpt372a;
-                               break;
-                       case PCI_DEVICE_ID_TTI_HPT302:
-                               /* 302N if rev > 1 */
-                               if (rev > 1)
-                                       return -ENODEV;
-                               ppi[0] = &info_hpt302;
-                               /* Check this */
-                               chip_table = &hpt302;
-                               break;
-                       case PCI_DEVICE_ID_TTI_HPT371:
-                               if (rev > 1)
-                                       return -ENODEV;
-                               ppi[0] = &info_hpt302;
-                               chip_table = &hpt371;
-                               /* Single channel device, master is not present
-                                  but the BIOS (or us for non x86) must mark it
-                                  absent */
-                               pci_read_config_byte(dev, 0x50, &mcr1);
-                               mcr1 &= ~0x04;
-                               pci_write_config_byte(dev, 0x50, mcr1);
-                               break;
-                       case PCI_DEVICE_ID_TTI_HPT374:
-                               chip_table = &hpt374;
-                               if (!(PCI_FUNC(dev->devfn) & 1))
-                                       *ppi = &info_hpt374_fn0;
-                               else
-                                       *ppi = &info_hpt374_fn1;
-                               break;
-                       default:
-                               printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
+               switch (dev->device) {
+               case PCI_DEVICE_ID_TTI_HPT372:
+                       /* 372N if rev >= 2 */
+                       if (rev >= 2)
+                               return -ENODEV;
+                       ppi[0] = &info_hpt372;
+                       chip_table = &hpt372a;
+                       break;
+               case PCI_DEVICE_ID_TTI_HPT302:
+                       /* 302N if rev > 1 */
+                       if (rev > 1)
+                               return -ENODEV;
+                       ppi[0] = &info_hpt302;
+                       /* Check this */
+                       chip_table = &hpt302;
+                       break;
+               case PCI_DEVICE_ID_TTI_HPT371:
+                       if (rev > 1)
+                               return -ENODEV;
+                       ppi[0] = &info_hpt302;
+                       chip_table = &hpt371;
+                       /*
+                        * Single channel device, master is not present
+                        * but the BIOS (or us for non x86) must mark it
+                        * absent
+                        */
+                       pci_read_config_byte(dev, 0x50, &mcr1);
+                       mcr1 &= ~0x04;
+                       pci_write_config_byte(dev, 0x50, mcr1);
+                       break;
+               case PCI_DEVICE_ID_TTI_HPT374:
+                       chip_table = &hpt374;
+                       if (!(PCI_FUNC(dev->devfn) & 1))
+                               *ppi = &info_hpt374_fn0;
+                       else
+                               *ppi = &info_hpt374_fn1;
+                       break;
+               default:
+                       printk(KERN_ERR
+                              "pata_hpt37x: PCI table is bogus, please report (%d).\n",
+                              dev->device);
                                return -ENODEV;
                }
        }
@@ -927,9 +939,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        if (chip_table == &hpt372a)
                outb(0x0e, iobase + 0x9c);
 
-       /* Some devices do not let this value be accessed via PCI space
-          according to the old driver. In addition we must use the value
-          from FN 0 on the HPT374 */
+       /*
+        * Some devices do not let this value be accessed via PCI space
+        * according to the old driver. In addition we must use the value
+        * from FN 0 on the HPT374.
+        */
 
        if (chip_table == &hpt374) {
                freq = hpt374_read_freq(dev);
@@ -943,10 +957,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                u8 sr;
                u32 total = 0;
 
-               printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n");
+               printk(KERN_WARNING
+                      "pata_hpt37x: BIOS has not set timing clocks.\n");
 
                /* This is the process the HPT371 BIOS is reported to use */
-               for(i = 0; i < 128; i++) {
+               for (i = 0; i < 128; i++) {
                        pci_read_config_byte(dev, 0x78, &sr);
                        total += sr & 0x1FF;
                        udelay(15);
@@ -981,17 +996,22 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
                /* Select the DPLL clock. */
                pci_write_config_byte(dev, 0x5b, 0x21);
-               pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
+               pci_write_config_dword(dev, 0x5C,
+                                      (f_high << 16) | f_low | 0x100);
 
-               for(adjust = 0; adjust < 8; adjust++) {
+               for (adjust = 0; adjust < 8; adjust++) {
                        if (hpt37x_calibrate_dpll(dev))
                                break;
-                       /* See if it'll settle at a fractionally different clock */
+                       /*
+                        * See if it'll settle at a fractionally
+                        * different clock
+                        */
                        if (adjust & 1)
                                f_low -= adjust >> 1;
                        else
                                f_high += adjust >> 1;
-                       pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
+                       pci_write_config_dword(dev, 0x5C,
+                                              (f_high << 16) | f_low | 0x100);
                }
                if (adjust == 8) {
                        printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
@@ -1010,7 +1030,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 *      Perform a final fixup. Note that we will have used the
                 *      DPLL on the HPT372 which means we don't have to worry
                 *      about lack of UDMA133 support on lower clocks
-                */
+                */
 
                if (clock_slot < 2 && ppi[0] == &info_hpt370)
                        ppi[0] = &info_hpt370_33;
@@ -1035,9 +1055,9 @@ static const struct pci_device_id hpt37x[] = {
 };
 
 static struct pci_driver hpt37x_pci_driver = {
-       .name           = DRV_NAME,
+       .name           = DRV_NAME,
        .id_table       = hpt37x,
-       .probe          = hpt37x_init_one,
+       .probe          = hpt37x_init_one,
        .remove         = ata_pci_remove_one
 };