ASoC: rockchip: i2s: fix error defination of transmit data level

According to description about "Transmit Data Level",

This bit field controls the level at which a DMA request
is made by the transmit logic.

It is equal to the watermark level.

That is, the dma_tx_req signal is generated when the number
of valid data entries in the TXFIFO
(TXFIFO0 if CSR=00
 TXFIFO1 if CSR=01
 TXFIFO2 if CSR=10
 TXFIFO3 if CSR=11)
is equal to or below this field value.

Different to receive data level, transmit data level does not need
to "-1".

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/rockchip/rockchip_i2s.h b/sound/soc/rockchip/rockchip_i2s.h
index 89a5d8b..93f456f 100644 (file)
--- a/sound/soc/rockchip/rockchip_i2s.h
+++ b/sound/soc/rockchip/rockchip_i2s.h
@@ -127,7 +127,7 @@
 #define I2S_DMACR_TDE_DISABLE  (0 << I2S_DMACR_TDE_SHIFT)
 #define I2S_DMACR_TDE_ENABLE   (1 << I2S_DMACR_TDE_SHIFT)
 #define I2S_DMACR_TDL_SHIFT    0
-#define I2S_DMACR_TDL(x)       ((x - 1) << I2S_DMACR_TDL_SHIFT)
+#define I2S_DMACR_TDL(x)       ((x) << I2S_DMACR_TDL_SHIFT)
 #define I2S_DMACR_TDL_MASK     (0x1f << I2S_DMACR_TDL_SHIFT)
 
 /*