e1000: move e1000_tbi_adjust_stats to where its used

... and make it static.

Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf503..45c8c86 100644 (file)
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -4836,84 +4836,6 @@ void e1000_update_adaptive(struct e1000_hw *hw)
        }
 }
 
-/**
- * e1000_tbi_adjust_stats
- * @hw: Struct containing variables accessed by shared code
- * @frame_len: The length of the frame in question
- * @mac_addr: The Ethernet destination address of the frame in question
- *
- * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
- */
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
-                           u32 frame_len, u8 *mac_addr)
-{
-       u64 carry_bit;
-
-       /* First adjust the frame length. */
-       frame_len--;
-       /* We need to adjust the statistics counters, since the hardware
-        * counters overcount this packet as a CRC error and undercount
-        * the packet as a good packet
-        */
-       /* This packet should not be counted as a CRC error. */
-       stats->crcerrs--;
-       /* This packet does count as a Good Packet Received. */
-       stats->gprc++;
-
-       /* Adjust the Good Octets received counters */
-       carry_bit = 0x80000000 & stats->gorcl;
-       stats->gorcl += frame_len;
-       /* If the high bit of Gorcl (the low 32 bits of the Good Octets
-        * Received Count) was one before the addition,
-        * AND it is zero after, then we lost the carry out,
-        * need to add one to Gorch (Good Octets Received Count High).
-        * This could be simplified if all environments supported
-        * 64-bit integers.
-        */
-       if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
-               stats->gorch++;
-       /* Is this a broadcast or multicast?  Check broadcast first,
-        * since the test for a multicast frame will test positive on
-        * a broadcast frame.
-        */
-       if (is_broadcast_ether_addr(mac_addr))
-               /* Broadcast packet */
-               stats->bprc++;
-       else if (is_multicast_ether_addr(mac_addr))
-               /* Multicast packet */
-               stats->mprc++;
-
-       if (frame_len == hw->max_frame_size) {
-               /* In this case, the hardware has overcounted the number of
-                * oversize frames.
-                */
-               if (stats->roc > 0)
-                       stats->roc--;
-       }
-
-       /* Adjust the bin counters when the extra byte put the frame in the
-        * wrong bin. Remember that the frame_len was adjusted above.
-        */
-       if (frame_len == 64) {
-               stats->prc64++;
-               stats->prc127--;
-       } else if (frame_len == 127) {
-               stats->prc127++;
-               stats->prc255--;
-       } else if (frame_len == 255) {
-               stats->prc255++;
-               stats->prc511--;
-       } else if (frame_len == 511) {
-               stats->prc511++;
-               stats->prc1023--;
-       } else if (frame_len == 1023) {
-               stats->prc1023++;
-               stats->prc1522--;
-       } else if (frame_len == 1522) {
-               stats->prc1522++;
-       }
-}
-
 /**
  * e1000_get_bus_info
  * @hw: Struct containing variables accessed by shared code

diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.h b/drivers/net/ethernet/intel/e1000/e1000_hw.h
index 11578c8..5cf7268 100644 (file)
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.h
@@ -393,8 +393,6 @@ s32 e1000_blink_led_start(struct e1000_hw *hw);
 /* Everything else */
 void e1000_reset_adaptive(struct e1000_hw *hw);
 void e1000_update_adaptive(struct e1000_hw *hw);
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
-                           u32 frame_len, u8 * mac_addr);
 void e1000_get_bus_info(struct e1000_hw *hw);
 void e1000_pci_set_mwi(struct e1000_hw *hw);
 void e1000_pci_clear_mwi(struct e1000_hw *hw);

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index ad3d5d1..fe2b9ad 100644 (file)
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3980,6 +3980,83 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
        napi_gro_receive(&adapter->napi, skb);
 }
 
+/**
+ * e1000_tbi_adjust_stats
+ * @hw: Struct containing variables accessed by shared code
+ * @frame_len: The length of the frame in question
+ * @mac_addr: The Ethernet destination address of the frame in question
+ *
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ */
+static void e1000_tbi_adjust_stats(struct e1000_hw *hw,
+                                  struct e1000_hw_stats *stats,
+                                  u32 frame_len, const u8 *mac_addr)
+{
+       u64 carry_bit;
+
+       /* First adjust the frame length. */
+       frame_len--;
+       /* We need to adjust the statistics counters, since the hardware
+        * counters overcount this packet as a CRC error and undercount
+        * the packet as a good packet
+        */
+       /* This packet should not be counted as a CRC error. */
+       stats->crcerrs--;
+       /* This packet does count as a Good Packet Received. */
+       stats->gprc++;
+
+       /* Adjust the Good Octets received counters */
+       carry_bit = 0x80000000 & stats->gorcl;
+       stats->gorcl += frame_len;
+       /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+        * Received Count) was one before the addition,
+        * AND it is zero after, then we lost the carry out,
+        * need to add one to Gorch (Good Octets Received Count High).
+        * This could be simplified if all environments supported
+        * 64-bit integers.
+        */
+       if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+               stats->gorch++;
+       /* Is this a broadcast or multicast?  Check broadcast first,
+        * since the test for a multicast frame will test positive on
+        * a broadcast frame.
+        */
+       if (is_broadcast_ether_addr(mac_addr))
+               stats->bprc++;
+       else if (is_multicast_ether_addr(mac_addr))
+               stats->mprc++;
+
+       if (frame_len == hw->max_frame_size) {
+               /* In this case, the hardware has overcounted the number of
+                * oversize frames.
+                */
+               if (stats->roc > 0)
+                       stats->roc--;
+       }
+
+       /* Adjust the bin counters when the extra byte put the frame in the
+        * wrong bin. Remember that the frame_len was adjusted above.
+        */
+       if (frame_len == 64) {
+               stats->prc64++;
+               stats->prc127--;
+       } else if (frame_len == 127) {
+               stats->prc127++;
+               stats->prc255--;
+       } else if (frame_len == 255) {
+               stats->prc255++;
+               stats->prc511--;
+       } else if (frame_len == 511) {
+               stats->prc511++;
+               stats->prc1023--;
+       } else if (frame_len == 1023) {
+               stats->prc1023++;
+               stats->prc1522--;
+       } else if (frame_len == 1522) {
+               stats->prc1522++;
+       }
+}
+
 /**
  * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
  * @adapter: board private structure