spi: dw: Remove test for non-zero spi->max_speed_hz

Test for non-zero spi->max_speed_hz in dw_spi_setup() looks needless as
spi_setup() defaults to master->max_speed_hz in case it is not set. This
drivers sets the master->max_speed_hz based on max_freq data passed to it
via dw_spi_add_host() call. I suppose things have already fallen apart if
dw_spi_mmio_probe() or spi_pci_probe() ever passes zero max_freq.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 2b5d736..1153d36 100644 (file)
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -448,11 +448,6 @@ static int dw_spi_setup(struct spi_device *spi)
        }
        chip->bits_per_word = spi->bits_per_word;
 
-       if (!spi->max_speed_hz) {
-               dev_err(&spi->dev, "No max speed HZ parameter\n");
-               return -EINVAL;
-       }
-
        chip->tmode = 0; /* Tx & Rx */
        /* Default SPI mode is SCPOL = 0, SCPH = 0 */
        chip->cr0 = (chip->bits_per_word - 1)