usb: dwc3: add disable usb3 suspend phy quirk

This patch adds disable usb3 suspend phy quirk, and some special platforms
can configure that if it is needed.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index b724b2e..08b394e 100644 (file)
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -32,6 +32,7 @@ Optional properties:
  - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
  - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
                        LTSSM during USB3 Compliance mode.
+ - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
 
 This is usually a subnode to DWC3 glue to which it is connected.
 

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c3dfb19..87ffb86 100644 (file)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -404,6 +404,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
        if (dwc->tx_de_emphasis_quirk)
                reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
 
+       if (dwc->dis_u3_susphy_quirk && dwc->is_fpga)
+               reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
        dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 
        mdelay(100);
@@ -812,6 +815,8 @@ static int dwc3_probe(struct platform_device *pdev)
                                "snps,lfps_filter_quirk");
                dwc->rx_detect_poll_quirk = of_property_read_bool(node,
                                "snps,rx_detect_poll_quirk");
+               dwc->dis_u3_susphy_quirk = of_property_read_bool(node,
+                               "snps,dis_u3_susphy_quirk");
 
                dwc->tx_de_emphasis_quirk = of_property_read_bool(node,
                                "snps,tx_de_emphasis_quirk");
@@ -834,6 +839,7 @@ static int dwc3_probe(struct platform_device *pdev)
                dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
                dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
                dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
+               dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
 
                dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
                if (pdata->tx_de_emphasis)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index cf9aaca..fa778b0 100644 (file)
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -697,6 +697,7 @@ struct dwc3_scratchpad_array {
  * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
  * @lfps_filter_quirk: set if we enable LFPS filter quirk
  * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
+ * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  *     0       - -6dB de-emphasis
@@ -818,6 +819,7 @@ struct dwc3 {
        unsigned                del_phy_power_chg_quirk:1;
        unsigned                lfps_filter_quirk:1;
        unsigned                rx_detect_poll_quirk:1;
+       unsigned                dis_u3_susphy_quirk:1;
 
        unsigned                tx_de_emphasis_quirk:1;
        unsigned                tx_de_emphasis:2;

diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index e1ab900..0f1d5ad 100644 (file)
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -36,6 +36,7 @@ struct dwc3_platform_data {
        unsigned del_phy_power_chg_quirk:1;
        unsigned lfps_filter_quirk:1;
        unsigned rx_detect_poll_quirk:1;
+       unsigned dis_u3_susphy_quirk:1;
 
        unsigned tx_de_emphasis_quirk:1;
        unsigned tx_de_emphasis:2;