ARM: shmobile: marzen: Remove DU platform device

Platform data support has been removed from the DU driver, drop DU
support from the legacy Marzen board file. The multiplatform DT-based
Marzen support should be used instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 994dc7d..598f704 100644 (file)
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -171,62 +170,6 @@ static struct platform_device hspi_device = {
        .num_resources  = ARRAY_SIZE(hspi_resources),
 };
 
-/*
- * DU
- *
- * The panel only specifies the [hv]display and [hv]total values. The position
- * and width of the sync pulses don't matter, they're copied from VESA timings.
- */
-static struct rcar_du_encoder_data du_encoders[] = {
-       {
-               .type = RCAR_DU_ENCODER_VGA,
-               .output = RCAR_DU_OUTPUT_DPAD0,
-       }, {
-               .type = RCAR_DU_ENCODER_LVDS,
-               .output = RCAR_DU_OUTPUT_DPAD1,
-               .connector.lvds.panel = {
-                       .width_mm = 210,
-                       .height_mm = 158,
-                       .mode = {
-                               .pixelclock = 65000000,
-                               .hactive = 1024,
-                               .hfront_porch = 20,
-                               .hback_porch = 160,
-                               .hsync_len = 136,
-                               .vactive = 768,
-                               .vfront_porch = 3,
-                               .vback_porch = 29,
-                               .vsync_len = 6,
-                       },
-               },
-       },
-};
-
-static const struct rcar_du_platform_data du_pdata __initconst = {
-       .encoders = du_encoders,
-       .num_encoders = ARRAY_SIZE(du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
-       DEFINE_RES_MEM(0xfff80000, 0x40000),
-       DEFINE_RES_IRQ(gic_iid(0x3f)),
-};
-
-static void __init marzen_add_du_device(void)
-{
-       struct platform_device_info info = {
-               .name = "rcar-du-r8a7779",
-               .id = -1,
-               .res = du_resources,
-               .num_res = ARRAY_SIZE(du_resources),
-               .data = &du_pdata,
-               .size_data = sizeof(du_pdata),
-               .dma_mask = DMA_BIT_MASK(32),
-       };
-
-       platform_device_register_full(&info);
-}
-
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
        {
@@ -385,7 +328,6 @@ static void __init marzen_init(void)
        platform_device_register_full(&vin1_info);
        platform_device_register_full(&vin3_info);
        platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
-       marzen_add_du_device();
 }
 
 static const char *marzen_boards_compat_dt[] __initdata = {