brcmfmac: use asynchronous firmware request in USB

This patch adds use of asynchronous firmware request to
the driver USB layer.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 8d67940..21335e2 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -25,6 +25,7 @@
 #include <dhd_bus.h>
 #include <dhd_dbg.h>
 
+#include "firmware.h"
 #include "usb_rdl.h"
 #include "usb.h"
 
@@ -87,7 +88,7 @@ struct brcmf_usbdev_info {
        struct brcmf_usbreq *tx_reqs;
        struct brcmf_usbreq *rx_reqs;
 
-       u8 *image;      /* buffer for combine fw and nvram */
+       const u8 *image;        /* buffer for combine fw and nvram */
        int image_len;
 
        struct usb_device *usbdev;
@@ -1021,7 +1022,7 @@ brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
        }
 
        err = brcmf_usb_dlstart(devinfo,
-               devinfo->image, devinfo->image_len);
+               (u8 *)devinfo->image, devinfo->image_len);
        if (err == 0)
                err = brcmf_usb_dlrun(devinfo);
        return err;
@@ -1080,7 +1081,22 @@ static int check_file(const u8 *headers)
        return -1;
 }
 
-static int brcmf_usb_get_fw(struct brcmf_usbdev_info *devinfo)
+static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
+{
+       switch (devinfo->bus_pub.devid) {
+       case 43143:
+               return BRCMF_USB_43143_FW_NAME;
+       case 43235:
+       case 43236:
+       case 43238:
+               return BRCMF_USB_43236_FW_NAME;
+       case 43242:
+               return BRCMF_USB_43242_FW_NAME;
+       default:
+               return NULL;
+       }
+}
+static __used int brcmf_usb_get_fw(struct brcmf_usbdev_info *devinfo)
 {
        s8 *fwname;
        const struct firmware *fw;
@@ -1202,16 +1218,6 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
                goto error;
        }
 
-       if (!brcmf_usb_dlneeded(devinfo))
-               return &devinfo->bus_pub;
-
-       brcmf_dbg(USB, "Start fw downloading\n");
-       if (brcmf_usb_get_fw(devinfo))
-               goto error;
-
-       if (brcmf_usb_fw_download(devinfo))
-               goto error;
-
        return &devinfo->bus_pub;
 
 error:
@@ -1252,12 +1258,47 @@ fail:
        return ret;
 }
 
+static void brcmf_usb_probe_phase2(struct device *dev,
+                                  const struct firmware *fw,
+                                  void *nvram, u32 nvlen)
+{
+       struct brcmf_bus *bus = dev_get_drvdata(dev);
+       struct brcmf_usbdev_info *devinfo;
+       int ret;
+
+       brcmf_dbg(USB, "Start fw downloading\n");
+       ret = check_file(fw->data);
+       if (ret < 0) {
+               brcmf_err("invalid firmware\n");
+               release_firmware(fw);
+               goto error;
+       }
+
+       devinfo = bus->bus_priv.usb->devinfo;
+       devinfo->image = fw->data;
+       devinfo->image_len = fw->size;
+
+       ret = brcmf_usb_fw_download(devinfo);
+       release_firmware(fw);
+       if (ret)
+               goto error;
+
+       ret = brcmf_usb_bus_setup(devinfo);
+       if (ret)
+               goto error;
+
+       return;
+error:
+       brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
+       device_release_driver(dev);
+}
+
 static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 {
        struct brcmf_bus *bus = NULL;
        struct brcmf_usbdev *bus_pub = NULL;
-       int ret;
        struct device *dev = devinfo->dev;
+       int ret;
 
        brcmf_dbg(USB, "Enter\n");
        bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
@@ -1280,13 +1321,16 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
        bus->proto_type = BRCMF_PROTO_BCDC;
        bus->always_use_fws_queue = true;
 
-       ret = brcmf_usb_bus_setup(devinfo);
-       if (ret) {
-               brcmf_err("dongle is not responding\n");
-               goto fail;
+       if (!brcmf_usb_dlneeded(devinfo)) {
+               ret = brcmf_usb_bus_setup(devinfo);
+               if (ret)
+                       goto fail;
        }
-
+       /* request firmware here */
+       brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
+                              brcmf_usb_probe_phase2);
        return 0;
+
 fail:
        /* Release resources in reverse order */
        kfree(bus);
@@ -1409,12 +1453,8 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
        }
 
        /* Allocate interrupt URB and data buffer */
-       /* RNDIS says 8-byte intr, our old drivers used 4-byte */
-       if (IFEPDESC(usb, CONTROL_IF, 0).wMaxPacketSize == cpu_to_le16(16))
-               devinfo->intr_size = 8;
-       else
-               devinfo->intr_size = 4;
-
+       devinfo->intr_size =
+               le16_to_cpu(IFEPDESC(usb, CONTROL_IF, 0).wMaxPacketSize);
        devinfo->interval = IFEPDESC(usb, CONTROL_IF, 0).bInterval;
 
        if (usb->speed == USB_SPEED_SUPER)
@@ -1481,13 +1521,11 @@ static int brcmf_usb_reset_resume(struct usb_interface *intf)
 {
        struct usb_device *usb = interface_to_usbdev(intf);
        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
-
        brcmf_dbg(USB, "Enter\n");
 
-       if (!brcmf_usb_fw_download(devinfo))
-               return brcmf_usb_bus_setup(devinfo);
-
-       return -EIO;
+       return brcmf_fw_get_firmwares(&usb->dev, 0,
+                                     brcmf_usb_get_fwname(devinfo), NULL,
+                                     brcmf_usb_probe_phase2);
 }
 
 #define BRCMF_USB_VENDOR_ID_BROADCOM   0x0a5c