hwmon: (adt7411) set sane values for CFG1 and CFG3

According to the datasheet we have to set some bits as 0 and others as 1.
Make sure we do this for CFG1 and CFG3.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index a7f8869..fc1e65a 100644 (file)
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -30,6 +30,7 @@
 
 #define ADT7411_REG_CFG1                       0x18
 #define ADT7411_CFG1_START_MONITOR             (1 << 0)
+#define ADT7411_CFG1_RESERVED_BIT1             (1 << 1)
 #define ADT7411_CFG1_RESERVED_BIT3             (1 << 3)
 
 #define ADT7411_REG_CFG2                       0x19
@@ -37,6 +38,9 @@
 
 #define ADT7411_REG_CFG3                       0x1a
 #define ADT7411_CFG3_ADC_CLK_225               (1 << 0)
+#define ADT7411_CFG3_RESERVED_BIT1             (1 << 1)
+#define ADT7411_CFG3_RESERVED_BIT2             (1 << 2)
+#define ADT7411_CFG3_RESERVED_BIT3             (1 << 3)
 #define ADT7411_CFG3_REF_VDD                   (1 << 4)
 
 #define ADT7411_REG_DEVICE_ID                  0x4d
@@ -280,6 +284,45 @@ static int adt7411_detect(struct i2c_client *client,
        return 0;
 }
 
+static int adt7411_init_device(struct adt7411_data *data)
+{
+       int ret;
+       u8 val;
+
+       ret = i2c_smbus_read_byte_data(data->client, ADT7411_REG_CFG3);
+       if (ret < 0)
+               return ret;
+
+       /*
+        * We must only write zero to bit 1 and bit 2 and only one to bit 3
+        * according to the datasheet.
+        */
+       val = ret;
+       val &= ~(ADT7411_CFG3_RESERVED_BIT1 | ADT7411_CFG3_RESERVED_BIT2);
+       val |= ADT7411_CFG3_RESERVED_BIT3;
+
+       ret = i2c_smbus_write_byte_data(data->client, ADT7411_REG_CFG3, val);
+       if (ret < 0)
+               return ret;
+
+       ret = i2c_smbus_read_byte_data(data->client, ADT7411_REG_CFG1);
+       if (ret < 0)
+               return ret;
+
+       /*
+        * We must only write zero to bit 1 and only one to bit 3 according to
+        * the datasheet.
+        */
+       val = ret;
+       val &= ~ADT7411_CFG1_RESERVED_BIT1;
+       val |= ADT7411_CFG1_RESERVED_BIT3;
+
+       /* enable monitoring */
+       val |= ADT7411_CFG1_START_MONITOR;
+
+       return i2c_smbus_write_byte_data(data->client, ADT7411_REG_CFG1, val);
+}
+
 static int adt7411_probe(struct i2c_client *client,
                                   const struct i2c_device_id *id)
 {
@@ -297,10 +340,7 @@ static int adt7411_probe(struct i2c_client *client,
        mutex_init(&data->device_lock);
        mutex_init(&data->update_lock);
 
-       /* According to the datasheet, we must only write 1 to bit 3 */
-       ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
-                                ADT7411_CFG1_RESERVED_BIT3
-                                | ADT7411_CFG1_START_MONITOR, 1);
+       ret = adt7411_init_device(data);
        if (ret < 0)
                return ret;