regulator: palmas: Fix SMPS list for 0V

get_voltage_sel reads from SMPS register - if the read selector value
is 0, the SMPS is actually disabled - So, this is in addition to the
ctrl_register that may also be used to enable/disable the SMPS.

The original logic(prior to commit dbabd624d4eec50b6) used to be:
static int palmas_map_voltage_smps(struct regulator_dev *rdev,
               int min_uV, int max_uV)
<snip>
       if (min_uV == 0)
               return 0;

To handle this scenario, with the transition to regulator_list
implementation, we seem to have missed the data necessary to mark as
one of the valid entries as "0" 'disabled regulator' which results in
0 volts - So, stick with pre-existing logic.

Without this added to the list, palmas regulator driver,
on probe, attempts to setup constraints and in the case of
OMAP5uEVM, SMPS9 (which is mapped for 2v1 audio supply) fails in
regulator_list_voltage_linear_range mapping of '0', and as a fall back
of constraints not being applied, the entire regulator list is not
enumerated due to assumption that something system wide has gone bad
on with the PMIC.

Fixes: dbabd624d4eec50b6 ("regulator: palmas: Reemove open coded functions with helper functions")
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 864ed02..b982f0f 100644 (file)
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -37,12 +37,14 @@ struct regs_info {
 };
 
 static const struct regulator_linear_range smps_low_ranges[] = {
+       REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
        REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0),
        REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000),
        REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0),
 };
 
 static const struct regulator_linear_range smps_high_ranges[] = {
+       REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
        REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0),
        REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000),
        REGULATOR_LINEAR_RANGE(3300000, 0x7A, 0x7f, 0),