if CGROUPS
-config CGROUP_DEBUG
- bool "Example controller"
- default n
- help
- This option enables a simple controller that exports
- debugging information about the cgroups framework.
-
- Say N.
-
-config CGROUP_FREEZER
- bool "Freezer controller"
- help
- Provides a way to freeze and unfreeze all tasks in a
- cgroup.
-
-config CGROUP_PIDS
- bool "PIDs controller"
- help
- Provides enforcement of process number limits in the scope of a
- cgroup. Any attempt to fork more processes than is allowed in the
- cgroup will fail. PIDs are fundamentally a global resource because it
- is fairly trivial to reach PID exhaustion before you reach even a
- conservative kmemcg limit. As a result, it is possible to grind a
- system to halt without being limited by other cgroup policies. The
- PIDs cgroup subsystem is designed to stop this from happening.
-
- It should be noted that organisational operations (such as attaching
- to a cgroup hierarchy will *not* be blocked by the PIDs subsystem),
- since the PIDs limit only affects a process's ability to fork, not to
- attach to a cgroup.
-
-config CGROUP_DEVICE
- bool "Device controller"
- help
- Provides a cgroup controller implementing whitelists for
- devices which a process in the cgroup can mknod or open.
-
-config CPUSETS
- bool "Cpuset controller"
- help
- This option will let you create and manage CPUSETs which
- allow dynamically partitioning a system into sets of CPUs and
- Memory Nodes and assigning tasks to run only within those sets.
- This is primarily useful on large SMP or NUMA systems.
-
- Say N if unsure.
-
-config PROC_PID_CPUSET
- bool "Include legacy /proc/<pid>/cpuset file"
- depends on CPUSETS
- default y
-
-config CGROUP_CPUACCT
- bool "Simple CPU accounting controller"
- help
- Provides a simple controller for monitoring the
- total CPU consumed by the tasks in a cgroup.
-
config PAGE_COUNTER
bool
the kmem extension can use it to guarantee that no group of processes
will ever exhaust kernel resources alone.
-config CGROUP_HUGETLB
- bool "HugeTLB controller"
- depends on HUGETLB_PAGE
- select PAGE_COUNTER
+config BLK_CGROUP
+ bool "IO controller"
+ depends on BLOCK
default n
- help
- Provides a cgroup controller for HugeTLB pages.
- When you enable this, you can put a per cgroup limit on HugeTLB usage.
- The limit is enforced during page fault. Since HugeTLB doesn't
- support page reclaim, enforcing the limit at page fault time implies
- that, the application will get SIGBUS signal if it tries to access
- HugeTLB pages beyond its limit. This requires the application to know
- beforehand how much HugeTLB pages it would require for its use. The
- control group is tracked in the third page lru pointer. This means
- that we cannot use the controller with huge page less than 3 pages.
+ ---help---
+ Generic block IO controller cgroup interface. This is the common
+ cgroup interface which should be used by various IO controlling
+ policies.
-config CGROUP_PERF
- bool "Perf controller"
- depends on PERF_EVENTS && CGROUPS
- help
- This option extends the perf per-cpu mode to restrict monitoring
- to threads which belong to the cgroup specified and run on the
- designated cpu.
+ Currently, CFQ IO scheduler uses it to recognize task groups and
+ control disk bandwidth allocation (proportional time slice allocation)
+ to such task groups. It is also used by bio throttling logic in
+ block layer to implement upper limit in IO rates on a device.
- Say N if unsure.
+ This option only enables generic Block IO controller infrastructure.
+ One needs to also enable actual IO controlling logic/policy. For
+ enabling proportional weight division of disk bandwidth in CFQ, set
+ CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
+ CONFIG_BLK_DEV_THROTTLING=y.
+
+ See Documentation/cgroups/blkio-controller.txt for more information.
+
+config DEBUG_BLK_CGROUP
+ bool "IO controller debugging"
+ depends on BLK_CGROUP
+ default n
+ ---help---
+ Enable some debugging help. Currently it exports additional stat
+ files in a cgroup which can be useful for debugging.
+
+config CGROUP_WRITEBACK
+ bool
+ depends on MEMCG && BLK_CGROUP
+ default y
menuconfig CGROUP_SCHED
bool "CPU controller"
endif #CGROUP_SCHED
-config BLK_CGROUP
- bool "IO controller"
- depends on BLOCK
+config CGROUP_PIDS
+ bool "PIDs controller"
+ help
+ Provides enforcement of process number limits in the scope of a
+ cgroup. Any attempt to fork more processes than is allowed in the
+ cgroup will fail. PIDs are fundamentally a global resource because it
+ is fairly trivial to reach PID exhaustion before you reach even a
+ conservative kmemcg limit. As a result, it is possible to grind a
+ system to halt without being limited by other cgroup policies. The
+ PIDs cgroup subsystem is designed to stop this from happening.
+
+ It should be noted that organisational operations (such as attaching
+ to a cgroup hierarchy will *not* be blocked by the PIDs subsystem),
+ since the PIDs limit only affects a process's ability to fork, not to
+ attach to a cgroup.
+
+config CGROUP_FREEZER
+ bool "Freezer controller"
+ help
+ Provides a way to freeze and unfreeze all tasks in a
+ cgroup.
+
+config CGROUP_HUGETLB
+ bool "HugeTLB controller"
+ depends on HUGETLB_PAGE
+ select PAGE_COUNTER
default n
- ---help---
- Generic block IO controller cgroup interface. This is the common
- cgroup interface which should be used by various IO controlling
- policies.
+ help
+ Provides a cgroup controller for HugeTLB pages.
+ When you enable this, you can put a per cgroup limit on HugeTLB usage.
+ The limit is enforced during page fault. Since HugeTLB doesn't
+ support page reclaim, enforcing the limit at page fault time implies
+ that, the application will get SIGBUS signal if it tries to access
+ HugeTLB pages beyond its limit. This requires the application to know
+ beforehand how much HugeTLB pages it would require for its use. The
+ control group is tracked in the third page lru pointer. This means
+ that we cannot use the controller with huge page less than 3 pages.
- Currently, CFQ IO scheduler uses it to recognize task groups and
- control disk bandwidth allocation (proportional time slice allocation)
- to such task groups. It is also used by bio throttling logic in
- block layer to implement upper limit in IO rates on a device.
+config CPUSETS
+ bool "Cpuset controller"
+ help
+ This option will let you create and manage CPUSETs which
+ allow dynamically partitioning a system into sets of CPUs and
+ Memory Nodes and assigning tasks to run only within those sets.
+ This is primarily useful on large SMP or NUMA systems.
- This option only enables generic Block IO controller infrastructure.
- One needs to also enable actual IO controlling logic/policy. For
- enabling proportional weight division of disk bandwidth in CFQ, set
- CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
- CONFIG_BLK_DEV_THROTTLING=y.
+ Say N if unsure.
- See Documentation/cgroups/blkio-controller.txt for more information.
+config PROC_PID_CPUSET
+ bool "Include legacy /proc/<pid>/cpuset file"
+ depends on CPUSETS
+ default y
-config DEBUG_BLK_CGROUP
- bool "IO controller debugging"
- depends on BLK_CGROUP
+config CGROUP_DEVICE
+ bool "Device controller"
+ help
+ Provides a cgroup controller implementing whitelists for
+ devices which a process in the cgroup can mknod or open.
+
+config CGROUP_CPUACCT
+ bool "Simple CPU accounting controller"
+ help
+ Provides a simple controller for monitoring the
+ total CPU consumed by the tasks in a cgroup.
+
+config CGROUP_PERF
+ bool "Perf controller"
+ depends on PERF_EVENTS
+ help
+ This option extends the perf per-cpu mode to restrict monitoring
+ to threads which belong to the cgroup specified and run on the
+ designated cpu.
+
+ Say N if unsure.
+
+config CGROUP_DEBUG
+ bool "Example controller"
default n
- ---help---
- Enable some debugging help. Currently it exports additional stat
- files in a cgroup which can be useful for debugging.
+ help
+ This option enables a simple controller that exports
+ debugging information about the cgroups framework.
-config CGROUP_WRITEBACK
- bool
- depends on MEMCG && BLK_CGROUP
- default y
+ Say N.
endif # CGROUPS
projects / cascardo / linux.git / commitdiff