* @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
* @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
* @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
+ * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel,
+ * this is used only with channel switching with CSA
*/
enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1),
IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2),
+ IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3),
};
/**
* @addr: address of this interface
* @p2p: indicates whether this AP or STA interface is a p2p
* interface, i.e. a GO or p2p-sta respectively
+ * @csa_active: marks whether a channel switch is going on
* @driver_flags: flags/capabilities the driver has for this interface,
* these need to be set (or cleared) when the interface is added
* or, if supported by the driver, the interface type is changed
struct ieee80211_bss_conf bss_conf;
u8 addr[ETH_ALEN];
bool p2p;
+ bool csa_active;
u8 cab_queue;
u8 hw_queue[IEEE80211_NUM_ACS];
* @ipv6_addr_change: IPv6 address assignment on the given interface changed.
* Currently, this is only called for managed or P2P client interfaces.
* This callback is optional; it must not sleep.
+ *
+ * @channel_switch_beacon: Starts a channel switch to a new channel.
+ * Beacons are modified to include CSA or ECSA IEs before calling this
+ * function. The corresponding count fields in these IEs must be
+ * decremented, and when they reach zero the driver must call
+ * ieee80211_csa_finish(). Drivers which use ieee80211_beacon_get()
+ * get the csa counter decremented by mac80211, but must check if it is
+ * zero using ieee80211_csa_is_complete() after the beacon has been
+ * transmitted and then call ieee80211_csa_finish().
+ *
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct inet6_dev *idev);
#endif
+ void (*channel_switch_beacon)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_chan_def *chandef);
};
/**
return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
}
+/**
+ * ieee80211_csa_finish - notify mac80211 about channel switch
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * After a channel switch announcement was scheduled and the counter in this
+ * announcement hit zero, this function must be called by the driver to
+ * notify mac80211 that the channel can be changed.
+ */
+void ieee80211_csa_finish(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_csa_is_complete - find out if counters reached zero
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * This function returns whether the channel switch counters reached zero.
+ */
+bool ieee80211_csa_is_complete(struct ieee80211_vif *vif);
+
+
/**
* ieee80211_proberesp_get - retrieve a Probe Response template
* @hw: pointer obtained from ieee80211_alloc_hw().
return 0;
}
-static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
- struct cfg80211_beacon_data *params)
+int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_beacon_data *params)
{
struct beacon_data *new, *old;
int new_head_len, new_tail_len;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ /* don't allow changing the beacon while CSA is in place - offset
+ * of channel switch counter may change
+ */
+ if (sdata->vif.csa_active)
+ return -EBUSY;
+
old = rtnl_dereference(sdata->u.ap.beacon);
if (!old)
return -ENOENT;
return -ENOENT;
old_probe_resp = rtnl_dereference(sdata->u.ap.probe_resp);
+ /* abort any running channel switch */
+ sdata->vif.csa_active = false;
+ cancel_work_sync(&sdata->csa_finalize_work);
+
/* turn off carrier for this interface and dependent VLANs */
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
netif_carrier_off(vlan->dev);
return 0;
}
+static struct cfg80211_beacon_data *
+cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon)
+{
+ struct cfg80211_beacon_data *new_beacon;
+ u8 *pos;
+ int len;
+
+ len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len +
+ beacon->proberesp_ies_len + beacon->assocresp_ies_len +
+ beacon->probe_resp_len;
+
+ new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL);
+ if (!new_beacon)
+ return NULL;
+
+ pos = (u8 *)(new_beacon + 1);
+ if (beacon->head_len) {
+ new_beacon->head_len = beacon->head_len;
+ new_beacon->head = pos;
+ memcpy(pos, beacon->head, beacon->head_len);
+ pos += beacon->head_len;
+ }
+ if (beacon->tail_len) {
+ new_beacon->tail_len = beacon->tail_len;
+ new_beacon->tail = pos;
+ memcpy(pos, beacon->tail, beacon->tail_len);
+ pos += beacon->tail_len;
+ }
+ if (beacon->beacon_ies_len) {
+ new_beacon->beacon_ies_len = beacon->beacon_ies_len;
+ new_beacon->beacon_ies = pos;
+ memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len);
+ pos += beacon->beacon_ies_len;
+ }
+ if (beacon->proberesp_ies_len) {
+ new_beacon->proberesp_ies_len = beacon->proberesp_ies_len;
+ new_beacon->proberesp_ies = pos;
+ memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len);
+ pos += beacon->proberesp_ies_len;
+ }
+ if (beacon->assocresp_ies_len) {
+ new_beacon->assocresp_ies_len = beacon->assocresp_ies_len;
+ new_beacon->assocresp_ies = pos;
+ memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len);
+ pos += beacon->assocresp_ies_len;
+ }
+ if (beacon->probe_resp_len) {
+ new_beacon->probe_resp_len = beacon->probe_resp_len;
+ beacon->probe_resp = pos;
+ memcpy(pos, beacon->probe_resp, beacon->probe_resp_len);
+ pos += beacon->probe_resp_len;
+ }
+
+ return new_beacon;
+}
+
+void ieee80211_csa_finalize_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ csa_finalize_work);
+ struct ieee80211_local *local = sdata->local;
+ int err, changed;
+
+ if (!ieee80211_sdata_running(sdata))
+ return;
+
+ if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP))
+ return;
+
+ sdata->radar_required = sdata->csa_radar_required;
+ err = ieee80211_vif_change_channel(sdata, &local->csa_chandef,
+ &changed);
+ if (WARN_ON(err < 0))
+ return;
+
+ err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon);
+ if (err < 0)
+ return;
+
+ changed |= err;
+ kfree(sdata->u.ap.next_beacon);
+ sdata->u.ap.next_beacon = NULL;
+ sdata->vif.csa_active = false;
+
+ ieee80211_wake_queues_by_reason(&sdata->local->hw,
+ IEEE80211_MAX_QUEUE_MAP,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
+ ieee80211_bss_info_change_notify(sdata, changed);
+
+ cfg80211_ch_switch_notify(sdata->dev, &local->csa_chandef);
+}
+
+static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_csa_settings *params)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ struct ieee80211_chanctx *chanctx;
+ int err, num_chanctx;
+
+ if (!list_empty(&local->roc_list) || local->scanning)
+ return -EBUSY;
+
+ if (sdata->wdev.cac_started)
+ return -EBUSY;
+
+ if (cfg80211_chandef_identical(¶ms->chandef,
+ &sdata->vif.bss_conf.chandef))
+ return -EINVAL;
+
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (!chanctx_conf) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+
+ /* don't handle for multi-VIF cases */
+ chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
+ if (chanctx->refcount > 1) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+ num_chanctx = 0;
+ list_for_each_entry_rcu(chanctx, &local->chanctx_list, list)
+ num_chanctx++;
+ rcu_read_unlock();
+
+ if (num_chanctx > 1)
+ return -EBUSY;
+
+ /* don't allow another channel switch if one is already active. */
+ if (sdata->vif.csa_active)
+ return -EBUSY;
+
+ /* only handle AP for now. */
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ sdata->u.ap.next_beacon = cfg80211_beacon_dup(¶ms->beacon_after);
+ if (!sdata->u.ap.next_beacon)
+ return -ENOMEM;
+
+ sdata->csa_counter_offset_beacon = params->counter_offset_beacon;
+ sdata->csa_counter_offset_presp = params->counter_offset_presp;
+ sdata->csa_radar_required = params->radar_required;
+
+ if (params->block_tx)
+ ieee80211_stop_queues_by_reason(&local->hw,
+ IEEE80211_MAX_QUEUE_MAP,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
+ err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa);
+ if (err < 0)
+ return err;
+
+ local->csa_chandef = params->chandef;
+ sdata->vif.csa_active = true;
+
+ ieee80211_bss_info_change_notify(sdata, err);
+ drv_channel_switch_beacon(sdata, ¶ms->chandef);
+
+ return 0;
+}
+
static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
struct ieee80211_channel *chan, bool offchan,
unsigned int wait, const u8 *buf, size_t len,
.get_et_strings = ieee80211_get_et_strings,
.get_channel = ieee80211_cfg_get_channel,
.start_radar_detection = ieee80211_start_radar_detection,
+ .channel_switch = ieee80211_channel_switch,
};
return ret;
}
+int ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata,
+ const struct cfg80211_chan_def *chandef,
+ u32 *changed)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *conf;
+ struct ieee80211_chanctx *ctx;
+ int ret;
+ u32 chanctx_changed = 0;
+
+ /* should never be called if not performing a channel switch. */
+ if (WARN_ON(!sdata->vif.csa_active))
+ return -EINVAL;
+
+ if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
+ IEEE80211_CHAN_DISABLED))
+ return -EINVAL;
+
+ mutex_lock(&local->chanctx_mtx);
+ conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
+ lockdep_is_held(&local->chanctx_mtx));
+ if (!conf) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ctx = container_of(conf, struct ieee80211_chanctx, conf);
+ if (ctx->refcount != 1) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (sdata->vif.bss_conf.chandef.width != chandef->width) {
+ chanctx_changed = IEEE80211_CHANCTX_CHANGE_WIDTH;
+ *changed |= BSS_CHANGED_BANDWIDTH;
+ }
+
+ sdata->vif.bss_conf.chandef = *chandef;
+ ctx->conf.def = *chandef;
+
+ chanctx_changed |= IEEE80211_CHANCTX_CHANGE_CHANNEL;
+ drv_change_chanctx(local, ctx, chanctx_changed);
+
+ if (!local->use_chanctx) {
+ local->_oper_chandef = *chandef;
+ ieee80211_hw_config(local, 0);
+ }
+
+ ieee80211_recalc_chanctx_chantype(local, ctx);
+ ieee80211_recalc_smps_chanctx(local, ctx);
+ ieee80211_recalc_radar_chanctx(local, ctx);
+
+ ret = 0;
+ out:
+ mutex_unlock(&local->chanctx_mtx);
+ return ret;
+}
+
int ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata,
const struct cfg80211_chan_def *chandef,
u32 *changed)
}
#endif
+static inline void
+drv_channel_switch_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_chan_def *chandef)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ if (local->ops->channel_switch_beacon) {
+ trace_drv_channel_switch_beacon(local, sdata, chandef);
+ local->ops->channel_switch_beacon(&local->hw, &sdata->vif,
+ chandef);
+ }
+}
+
#endif /* __MAC80211_DRIVER_OPS */
struct beacon_data __rcu *beacon;
struct probe_resp __rcu *probe_resp;
+ /* to be used after channel switch. */
+ struct cfg80211_beacon_data *next_beacon;
struct list_head vlans;
struct ps_data ps;
struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS];
+ struct work_struct csa_finalize_work;
+ int csa_counter_offset_beacon;
+ int csa_counter_offset_presp;
+ bool csa_radar_required;
+
/* used to reconfigure hardware SM PS */
struct work_struct recalc_smps;
void ieee80211_sw_roc_work(struct work_struct *work);
void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc);
+/* channel switch handling */
+void ieee80211_csa_finalize_work(struct work_struct *work);
+
/* interface handling */
int ieee80211_iface_init(void);
void ieee80211_iface_exit(void);
bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata);
+int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_beacon_data *params);
static inline bool ieee80211_sdata_running(struct ieee80211_sub_if_data *sdata)
{
ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata,
const struct cfg80211_chan_def *chandef,
u32 *changed);
+/* NOTE: only use ieee80211_vif_change_channel() for channel switch */
+int __must_check
+ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata,
+ const struct cfg80211_chan_def *chandef,
+ u32 *changed);
void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata);
void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata);
void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata,
if (iftype == NL80211_IFTYPE_ADHOC &&
nsdata->vif.type == NL80211_IFTYPE_ADHOC)
return -EBUSY;
+ /*
+ * will not add another interface while any channel
+ * switch is active.
+ */
+ if (nsdata->vif.csa_active)
+ return -EBUSY;
/*
* The remaining checks are only performed for interfaces
cancel_work_sync(&local->dynamic_ps_enable_work);
cancel_work_sync(&sdata->recalc_smps);
+ sdata->vif.csa_active = false;
+ cancel_work_sync(&sdata->csa_finalize_work);
cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
skb_queue_head_init(&sdata->skb_queue);
INIT_WORK(&sdata->work, ieee80211_iface_work);
INIT_WORK(&sdata->recalc_smps, ieee80211_recalc_smps_work);
+ INIT_WORK(&sdata->csa_finalize_work, ieee80211_csa_finalize_work);
switch (type) {
case NL80211_IFTYPE_P2P_GO:
)
);
+TRACE_EVENT(drv_channel_switch_beacon,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_chan_def *chandef),
+
+ TP_ARGS(local, sdata, chandef),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ CHANDEF_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ CHANDEF_ASSIGN(chandef);
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " channel switch to " CHANDEF_PR_FMT,
+ LOCAL_PR_ARG, VIF_PR_ARG, CHANDEF_PR_ARG
+ )
+);
+
+
#ifdef CONFIG_MAC80211_MESSAGE_TRACING
#undef TRACE_SYSTEM
#define TRACE_SYSTEM mac80211_msg
return 0;
}
+void ieee80211_csa_finish(struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ ieee80211_queue_work(&sdata->local->hw,
+ &sdata->csa_finalize_work);
+}
+EXPORT_SYMBOL(ieee80211_csa_finish);
+
+static void ieee80211_update_csa(struct ieee80211_sub_if_data *sdata,
+ struct beacon_data *beacon)
+{
+ struct probe_resp *resp;
+ int counter_offset_beacon = sdata->csa_counter_offset_beacon;
+ int counter_offset_presp = sdata->csa_counter_offset_presp;
+
+ /* warn if the driver did not check for/react to csa completeness */
+ if (WARN_ON(((u8 *)beacon->tail)[counter_offset_beacon] == 0))
+ return;
+
+ ((u8 *)beacon->tail)[counter_offset_beacon]--;
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP &&
+ counter_offset_presp) {
+ rcu_read_lock();
+ resp = rcu_dereference(sdata->u.ap.probe_resp);
+
+ /* if nl80211 accepted the offset, this should not happen. */
+ if (WARN_ON(!resp)) {
+ rcu_read_unlock();
+ return;
+ }
+ resp->data[counter_offset_presp]--;
+ rcu_read_unlock();
+ }
+}
+
+bool ieee80211_csa_is_complete(struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+ struct beacon_data *beacon = NULL;
+ u8 *beacon_data;
+ size_t beacon_data_len;
+ int counter_beacon = sdata->csa_counter_offset_beacon;
+ int ret = false;
+
+ if (!ieee80211_sdata_running(sdata))
+ return false;
+
+ rcu_read_lock();
+ if (vif->type == NL80211_IFTYPE_AP) {
+ struct ieee80211_if_ap *ap = &sdata->u.ap;
+
+ beacon = rcu_dereference(ap->beacon);
+ if (WARN_ON(!beacon || !beacon->tail))
+ goto out;
+ beacon_data = beacon->tail;
+ beacon_data_len = beacon->tail_len;
+ } else {
+ WARN_ON(1);
+ goto out;
+ }
+
+ if (WARN_ON(counter_beacon > beacon_data_len))
+ goto out;
+
+ if (beacon_data[counter_beacon] == 0)
+ ret = true;
+ out:
+ rcu_read_unlock();
+
+ return ret;
+}
+EXPORT_SYMBOL(ieee80211_csa_is_complete);
+
struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u16 *tim_offset, u16 *tim_length)
struct beacon_data *beacon = rcu_dereference(ap->beacon);
if (beacon) {
+ if (sdata->vif.csa_active)
+ ieee80211_update_csa(sdata, beacon);
+
/*
* headroom, head length,
* tail length and maximum TIM length
projects / cascardo / linux.git / commitdiff