dsa: Rename phys_port_mask to enabled_port_mask

The phys in phys_port_mask suggests this mask is about PHYs. In fact,
it means physical ports. Rename to enabled_port_mask, indicating
external enabled ports of the switch, which is hopefully less
confusing.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 50caa52..7a5f0ef 100644 (file)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -160,7 +160,7 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
         * the same VLAN.
         */
        for (i = 0; i < priv->hw_params.num_ports; i++) {
-               if (!((1 << i) & ds->phys_port_mask))
+               if (!((1 << i) & ds->enabled_port_mask))
                        continue;
 
                reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
@@ -1009,7 +1009,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
        /* Enable all valid ports and disable those unused */
        for (port = 0; port < priv->hw_params.num_ports; port++) {
                /* IMP port receives special treatment */
-               if ((1 << port) & ds->phys_port_mask)
+               if ((1 << port) & ds->enabled_port_mask)
                        bcm_sf2_port_setup(ds, port, NULL);
                else if (dsa_is_cpu_port(ds, port))
                        bcm_sf2_imp_setup(ds, port);
@@ -1022,11 +1022,12 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
         * 7445D0, since 7445E0 disconnects the internal switch pseudo-PHY such
         * that we can use the regular SWITCH_MDIO master controller instead.
         *
-        * By default, DSA initializes ds->phys_mii_mask to ds->phys_port_mask
-        * to have a 1:1 mapping between Port address and PHY address in order
-        * to utilize the slave_mii_bus instance to read from Port PHYs. This is
-        * not what we want here, so we initialize phys_mii_mask 0 to always
-        * utilize the "master" MDIO bus backed by the "mdio-unimac" driver.
+        * By default, DSA initializes ds->phys_mii_mask to
+        * ds->enabled_port_mask to have a 1:1 mapping between Port address
+        * and PHY address in order to utilize the slave_mii_bus instance to
+        * read from Port PHYs. This is not what we want here, so we
+        * initialize phys_mii_mask 0 to always utilize the "master" MDIO
+        * bus backed by the "mdio-unimac" driver.
         */
        if (of_machine_is_compatible("brcm,bcm7445d0"))
                ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0));
@@ -1284,7 +1285,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
         * bcm_sf2_sw_setup
         */
        for (port = 0; port < DSA_MAX_PORTS; port++) {
-               if ((1 << port) & ds->phys_port_mask ||
+               if ((1 << port) & ds->enabled_port_mask ||
                    dsa_is_cpu_port(ds, port))
                        bcm_sf2_port_disable(ds, port, NULL);
        }
@@ -1308,7 +1309,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
                bcm_sf2_gphy_enable_set(ds, true);
 
        for (port = 0; port < DSA_MAX_PORTS; port++) {
-               if ((1 << port) & ds->phys_port_mask)
+               if ((1 << port) & ds->enabled_port_mask)
                        bcm_sf2_port_setup(ds, port, NULL);
                else if (dsa_is_cpu_port(ds, port))
                        bcm_sf2_imp_setup(ds, port);

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index adb608c..92cebab 100644 (file)
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -170,7 +170,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
        REG_WRITE(addr, PORT_VLAN_MAP,
                  ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
                   (dsa_is_cpu_port(ds, p) ?
-                       ds->phys_port_mask :
+                       ds->enabled_port_mask :
                        BIT(ds->dst->cpu_port)));
 
        /* Port Association Vector: when learning source addresses

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 165c2e1..689ebd3 100644 (file)
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -167,7 +167,7 @@ struct dsa_switch {
         * Slave mii_bus and devices for the individual ports.
         */
        u32                     dsa_port_mask;
-       u32                     phys_port_mask;
+       u32                     enabled_port_mask;
        u32                     phys_mii_mask;
        struct mii_bus          *slave_mii_bus;
        struct net_device       *ports[DSA_MAX_PORTS];
@@ -185,7 +185,7 @@ static inline bool dsa_is_dsa_port(struct dsa_switch *ds, int p)
 
 static inline bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
 {
-       return ds->phys_port_mask & (1 << p) && ds->ports[p];
+       return ds->enabled_port_mask & (1 << p) && ds->ports[p];
 }
 
 static inline u8 dsa_upstream_port(struct dsa_switch *ds)

diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 14bf12f..60ea984 100644 (file)
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -246,7 +246,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
                } else if (!strcmp(name, "dsa")) {
                        ds->dsa_port_mask |= 1 << i;
                } else {
-                       ds->phys_port_mask |= 1 << i;
+                       ds->enabled_port_mask |= 1 << i;
                }
                valid_name_found = true;
        }
@@ -259,7 +259,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
        /* Make the built-in MII bus mask match the number of ports,
         * switch drivers can override this later
         */
-       ds->phys_mii_mask = ds->phys_port_mask;
+       ds->phys_mii_mask = ds->enabled_port_mask;
 
        /*
         * If the CPU connects to this switch, set the switch tree
@@ -325,7 +325,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
         * Create network devices for physical switch ports.
         */
        for (i = 0; i < DSA_MAX_PORTS; i++) {
-               if (!(ds->phys_port_mask & (1 << i)))
+               if (!(ds->enabled_port_mask & (1 << i)))
                        continue;
 
                ret = dsa_slave_create(ds, parent, i, pd->port_names[i]);
@@ -435,7 +435,7 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
 
        /* Destroy network devices for physical switch ports. */
        for (port = 0; port < DSA_MAX_PORTS; port++) {
-               if (!(ds->phys_port_mask & (1 << port)))
+               if (!(ds->enabled_port_mask & (1 << port)))
                        continue;
 
                if (!ds->ports[port])