Input: cap11xx - add support for various cap11xx devices

There are variants of the cap11xx device with a varying number of
capacitance detection channels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
index 5164920..61d20d8 100644 (file)
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ b/Documentation/devicetree/bindings/input/cap11xx.txt
@@ -7,9 +7,10 @@ Required properties:
 
        compatible:             Must contain one of:
                                        "microchip,cap1106"
+                                       "microchip,cap1126"
+                                       "microchip,cap1188"
 
        reg:                    The I2C slave address of the device.
-                               Only 0x28 is valid.
 
        interrupts:             Property describing the interrupt line the
                                device's ALERT#/CM_IRQ# pin is connected to.

diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 0da2e83..eeda1f9 100644 (file)
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -1,7 +1,6 @@
 /*
  * Input driver for Microchip CAP11xx based capacitive touch sensors
  *
- *
  * (c) 2014 Daniel Mack <linux@zonque.org>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -54,8 +53,6 @@
 #define CAP11XX_REG_MANUFACTURER_ID    0xfe
 #define CAP11XX_REG_REVISION           0xff
 
-#define CAP11XX_NUM_CHN 6
-#define CAP11XX_PRODUCT_ID     0x55
 #define CAP11XX_MANUFACTURER_ID        0x5d
 
 struct cap11xx_priv {
@@ -63,7 +60,24 @@ struct cap11xx_priv {
        struct input_dev *idev;
 
        /* config */
-       unsigned short keycodes[CAP11XX_NUM_CHN];
+       u32 keycodes[];
+};
+
+struct cap11xx_hw_model {
+       u8 product_id;
+       unsigned int num_channels;
+};
+
+enum {
+       CAP1106,
+       CAP1126,
+       CAP1188,
+};
+
+static const struct cap11xx_hw_model cap11xx_devices[] = {
+       [CAP1106] = { .product_id = 0x55, .num_channels = 6 },
+       [CAP1126] = { .product_id = 0x53, .num_channels = 6 },
+       [CAP1188] = { .product_id = 0x50, .num_channels = 8 },
 };
 
 static const struct reg_default cap11xx_reg_defaults[] = {
@@ -150,7 +164,7 @@ static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
        if (ret < 0)
                goto out;
 
-       for (i = 0; i < CAP11XX_NUM_CHN; i++)
+       for (i = 0; i < priv->idev->keycodemax; i++)
                input_report_key(priv->idev, priv->keycodes[i],
                                 status & (1 << i));
 
@@ -187,11 +201,26 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
        struct device *dev = &i2c_client->dev;
        struct cap11xx_priv *priv;
        struct device_node *node;
+       const struct cap11xx_hw_model *cap;
        int i, error, irq, gain = 0;
        unsigned int val, rev;
-       u32 gain32, keycodes[CAP11XX_NUM_CHN];
+       u32 gain32;
 
-       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
+               dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
+               return -EINVAL;
+       }
+
+       cap = &cap11xx_devices[id->driver_data];
+       if (!cap || !cap->num_channels) {
+               dev_err(dev, "Invalid device configuration\n");
+               return -EINVAL;
+       }
+
+       priv = devm_kzalloc(dev,
+                           sizeof(*priv) +
+                               cap->num_channels * sizeof(priv->keycodes[0]),
+                           GFP_KERNEL);
        if (!priv)
                return -ENOMEM;
 
@@ -203,10 +232,10 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
        if (error)
                return error;
 
-       if (val != CAP11XX_PRODUCT_ID) {
+       if (val != cap->product_id) {
                dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
-                       val, CAP11XX_PRODUCT_ID);
-               return -ENODEV;
+                       val, cap->product_id);
+               return -ENXIO;
        }
 
        error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
@@ -216,7 +245,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
        if (val != CAP11XX_MANUFACTURER_ID) {
                dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
                        val, CAP11XX_MANUFACTURER_ID);
-               return -ENODEV;
+               return -ENXIO;
        }
 
        error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
@@ -234,17 +263,12 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
                        dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
        }
 
-       BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
-
        /* Provide some useful defaults */
-       for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-               keycodes[i] = KEY_A + i;
+       for (i = 0; i < cap->num_channels; i++)
+               priv->keycodes[i] = KEY_A + i;
 
        of_property_read_u32_array(node, "linux,keycodes",
-                                  keycodes, ARRAY_SIZE(keycodes));
-
-       for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-               priv->keycodes[i] = keycodes[i];
+                                  priv->keycodes, cap->num_channels);
 
        error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
                                   CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
@@ -268,17 +292,17 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
        if (of_property_read_bool(node, "autorepeat"))
                __set_bit(EV_REP, priv->idev->evbit);
 
-       for (i = 0; i < CAP11XX_NUM_CHN; i++)
+       for (i = 0; i < cap->num_channels; i++)
                __set_bit(priv->keycodes[i], priv->idev->keybit);
 
        __clear_bit(KEY_RESERVED, priv->idev->keybit);
 
        priv->idev->keycode = priv->keycodes;
        priv->idev->keycodesize = sizeof(priv->keycodes[0]);
-       priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
+       priv->idev->keycodemax = cap->num_channels;
 
        priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
-       priv->idev->id.product = CAP11XX_PRODUCT_ID;
+       priv->idev->id.product = cap->product_id;
        priv->idev->id.version = rev;
 
        priv->idev->open = cap11xx_input_open;
@@ -312,12 +336,16 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
 
 static const struct of_device_id cap11xx_dt_ids[] = {
        { .compatible = "microchip,cap1106", },
+       { .compatible = "microchip,cap1126", },
+       { .compatible = "microchip,cap1188", },
        {}
 };
 MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
 
 static const struct i2c_device_id cap11xx_i2c_ids[] = {
-       { "cap1106", 0 },
+       { "cap1106", CAP1106 },
+       { "cap1126", CAP1126 },
+       { "cap1188", CAP1188 },
        {}
 };
 MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);