ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late

The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index e9549a3..6fd4636 100644 (file)
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -56,6 +56,26 @@
  * appropriate baseboard support code.
  */
 
+static unsigned int mx31lilly_pins[] __initdata = {
+       MX31_PIN_CTS1__CTS1,
+       MX31_PIN_RTS1__RTS1,
+       MX31_PIN_TXD1__TXD1,
+       MX31_PIN_RXD1__RXD1,
+       MX31_PIN_CTS2__CTS2,
+       MX31_PIN_RTS2__RTS2,
+       MX31_PIN_TXD2__TXD2,
+       MX31_PIN_RXD2__RXD2,
+       MX31_PIN_CSPI3_MOSI__RXD3,
+       MX31_PIN_CSPI3_MISO__TXD3,
+       MX31_PIN_CSPI3_SCLK__RTS3,
+       MX31_PIN_CSPI3_SPI_RDY__CTS3,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+       .flags = IMXUART_HAVE_RTSCTS,
+};
+
 /* SMSC ethernet support */
 
 static struct resource smsc91x_resources[] = {
@@ -252,16 +272,12 @@ static void __init mx31lilly_board_init(void)
 {
        imx31_soc_init();
 
-       switch (mx31lilly_baseboard) {
-       case MX31LILLY_NOBOARD:
-               break;
-       case MX31LILLY_DB:
-               mx31lilly_db_init();
-               break;
-       default:
-               printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-                       mx31lilly_baseboard);
-       }
+       mxc_iomux_setup_multiple_pins(mx31lilly_pins,
+                                     ARRAY_SIZE(mx31lilly_pins), "mx31lily");
+
+       imx31_add_imx_uart0(&uart_pdata);
+       imx31_add_imx_uart1(&uart_pdata);
+       imx31_add_imx_uart2(&uart_pdata);
 
        mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
 
@@ -284,10 +300,17 @@ static void __init mx31lilly_board_init(void)
 
        imx31_add_spi_imx0(&spi0_pdata);
        imx31_add_spi_imx1(&spi1_pdata);
-       mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-       spi_register_board_info(&mc13783_dev, 1);
 
        regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lilly_late_init(void)
+{
+       if (mx31lilly_baseboard == MX31LILLY_DB)
+               mx31lilly_db_init();
+
+       mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+       spi_register_board_info(&mc13783_dev, 1);
 
        smsc91x_resources[1].start =
                        gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
@@ -310,6 +333,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
        .init_early = imx31_init_early,
        .init_irq = mx31_init_irq,
        .init_time      = mx31lilly_timer_init,
-       .init_machine = mx31lilly_board_init,
+       .init_machine   = mx31lilly_board_init,
+       .init_late      = mx31lilly_late_init,
        .restart        = mxc_restart,
 MACHINE_END

diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 649fe49..231f900 100644 (file)
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -43,18 +43,6 @@
  */
 
 static unsigned int lilly_db_board_pins[] __initdata = {
-       MX31_PIN_CTS1__CTS1,
-       MX31_PIN_RTS1__RTS1,
-       MX31_PIN_TXD1__TXD1,
-       MX31_PIN_RXD1__RXD1,
-       MX31_PIN_CTS2__CTS2,
-       MX31_PIN_RTS2__RTS2,
-       MX31_PIN_TXD2__TXD2,
-       MX31_PIN_RXD2__RXD2,
-       MX31_PIN_CSPI3_MOSI__RXD3,
-       MX31_PIN_CSPI3_MISO__TXD3,
-       MX31_PIN_CSPI3_SCLK__RTS3,
-       MX31_PIN_CSPI3_SPI_RDY__CTS3,
        MX31_PIN_SD1_DATA3__SD1_DATA3,
        MX31_PIN_SD1_DATA2__SD1_DATA2,
        MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -86,11 +74,6 @@ static unsigned int lilly_db_board_pins[] __initdata = {
        MX31_PIN_CONTRAST__CONTRAST,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-       .flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC support */
 
 static int mxc_mmc1_get_ro(struct device *dev)
@@ -203,9 +186,6 @@ void __init mx31lilly_db_init(void)
        mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
                                        ARRAY_SIZE(lilly_db_board_pins),
                                        "development board pins");
-       imx31_add_imx_uart0(&uart_pdata);
-       imx31_add_imx_uart1(&uart_pdata);
-       imx31_add_imx_uart2(&uart_pdata);
        imx31_add_mxc_mmc(0, &mmc_pdata);
        mx31lilly_init_fb();
 }