Merge tag 'renesas-maintainers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kerne...

Merge "Renesas ARM Based SoC Maintainers Updates for v3.18" from Simon Horman:

* Remove genmai_defconfig from MAINTAINERS
  genmai_defconfig was removed in v3.17-rc1.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-maintainers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove genmai_defconfig from MAINTAINERS

diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index d863d87..6428bcc 100644 (file)
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -250,5 +250,6 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
        .init_irq       = cns3xxx_init_irq,
        .init_time      = cns3xxx_timer_init,
        .init_machine   = cns3420_init,
+       .init_late      = cns3xxx_pcie_init_late,
        .restart        = cns3xxx_restart,
 MACHINE_END

diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index f85449a..4e9837d 100644 (file)
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -404,5 +404,6 @@ DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
        .init_irq       = cns3xxx_init_irq,
        .init_time      = cns3xxx_timer_init,
        .init_machine   = cns3xxx_init,
+       .init_late      = cns3xxx_pcie_init_late,
        .restart        = cns3xxx_restart,
 MACHINE_END

diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 5218b61..dc5df7f 100644 (file)
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -21,6 +21,12 @@ void __init cns3xxx_l2x0_init(void);
 static inline void cns3xxx_l2x0_init(void) {}
 #endif /* CONFIG_CACHE_L2X0 */
 
+#ifdef CONFIG_PCI
+extern void __init cns3xxx_pcie_init_late(void);
+#else
+static inline void __init cns3xxx_pcie_init_late(void) {}
+#endif
+
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);

diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 413134c..70fd81e 100644 (file)
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -318,7 +318,7 @@ static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
        return 0;
 }
 
-static int __init cns3xxx_pcie_init(void)
+void __init cns3xxx_pcie_init_late(void)
 {
        int i;
 
@@ -337,7 +337,4 @@ static int __init cns3xxx_pcie_init(void)
        }
 
        pci_assign_unassigned_resources();
-
-       return 0;
 }
-device_initcall(cns3xxx_pcie_init);

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 234c5bb..fa11415 100644 (file)
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -35,6 +35,7 @@
 #include <linux/platform_data/uio_pruss.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/tps6507x.h>
+#include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/wl12xx.h>
@@ -842,6 +843,16 @@ static int da850_lcd_hw_init(void)
        return 0;
 }
 
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies[] = {
+       /* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
+       REGULATOR_SUPPLY("AVDD", "1-0018"),
+       REGULATOR_SUPPLY("DRVDD", "1-0018"),
+
+       /* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
+       REGULATOR_SUPPLY("DVDD", "1-0018"),
+};
+
 /* TPS65070 voltage regulator support */
 
 /* 3.3V */
@@ -865,6 +876,7 @@ static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
        {
                .supply = "dvdd3318_c",
        },
+       REGULATOR_SUPPLY("IOVDD", "1-0018"),
 };
 
 /* 1.2V */
@@ -936,6 +948,7 @@ static struct regulator_init_data tps65070_regulator_data[] = {
                        .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
                                REGULATOR_CHANGE_STATUS),
                        .boot_on = 1,
+                       .always_on = 1,
                },
                .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
                .consumer_supplies = tps65070_dcdc2_consumers,
@@ -1446,6 +1459,8 @@ static __init void da850_evm_init(void)
        if (ret)
                pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+       regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
+
        ret = pmic_tps65070_init();
        if (ret)
                pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 6fd4dc8..b6f4bda 100644 (file)
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
        bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-       default PLAT_SPEAR_SINGLE
        select ARCH_REQUIRE_GPIOLIB
        select ARM_AMBA
        select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
        bool "ST SPEAr13xx"
-       depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+       depends on ARCH_MULTI_V7
        select ARM_GIC
        select GPIO_SPEAR_SPICS
        select HAVE_ARM_SCU if SMP
@@ -44,7 +43,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
        bool "ST SPEAr3xx"
-       depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+       depends on ARCH_MULTI_V5
        depends on !ARCH_SPEAR13XX
        select ARM_VIC
        select PINCTRL
@@ -75,7 +74,7 @@ endif
 
 config ARCH_SPEAR6XX
        bool "ST SPEAr6XX"
-       depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+       depends on ARCH_MULTI_V5
        depends on !ARCH_SPEAR13XX
        select ARM_VIC
        help
@@ -88,7 +87,7 @@ config MACH_SPEAR600
          Supports ST SPEAr600 boards configured via the device-tree
 
 config ARCH_SPEAR_AUTO
-       def_bool PLAT_SPEAR_SINGLE
+       bool
        depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
        select ARCH_SPEAR3XX
 

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 7364a53..18ad141 100644 (file)
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -77,7 +77,7 @@ config ARM_EXYNOS5440_CPUFREQ
 
 config ARM_EXYNOS_CPU_FREQ_BOOST_SW
        bool "EXYNOS Frequency Overclocking - Software"
-       depends on ARM_EXYNOS_CPUFREQ
+       depends on ARM_EXYNOS_CPUFREQ && THERMAL
        select CPU_FREQ_BOOST_SW
        select EXYNOS_THERMAL
        help