Required properties:
- compatible : should be "rockchip,<name>-tsadc"
+ "rockchip,rk3228-tsadc": found on RK3228 SoCs
"rockchip,rk3288-tsadc": found on RK3288 SoCs
"rockchip,rk3368-tsadc": found on RK3368 SoCs
+ "rockchip,rk3399-tsadc": found on RK3399 SoCs
- reg : physical base address of the controller and length of memory mapped
region.
- interrupts : The interrupt number to the cpu. The interrupt specifier format
/* Braswell thermal reporting device */
#define PCI_DEVICE_ID_PROC_BSW_THERMAL 0x22DC
+/* Broxton thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BXT0_THERMAL 0x0A8C
+#define PCI_DEVICE_ID_PROC_BXT1_THERMAL 0x1A8C
+#define PCI_DEVICE_ID_PROC_BXTX_THERMAL 0x4A8C
+#define PCI_DEVICE_ID_PROC_BXTP_THERMAL 0x5A8C
+
struct power_config {
u32 index;
u32 min_uw;
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_HSB_THERMAL)},
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_SKL_THERMAL)},
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BSW_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXT0_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXT1_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTX_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTP_THERMAL)},
{ 0, },
};
/* dev ops for Wildcat Point */
-static struct pch_dev_ops pch_dev_ops_wpt = {
+static const struct pch_dev_ops pch_dev_ops_wpt = {
.hw_init = pch_wpt_init,
.get_temp = pch_wpt_get_temp,
};
#define rcar_has_irq_support(priv) ((priv)->common->base)
#define rcar_id_to_shift(priv) ((priv)->id * 8)
-#ifdef DEBUG
-# define rcar_force_update_temp(priv) 1
-#else
-# define rcar_force_update_temp(priv) 0
-#endif
+static const struct of_device_id rcar_thermal_dt_ids[] = {
+ { .compatible = "renesas,rcar-thermal", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
/*
* basic functions
static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
{
struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+ int tmp;
+ int ret;
- if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv))
- rcar_thermal_update_temp(priv);
+ ret = rcar_thermal_update_temp(priv);
+ if (ret < 0)
+ return ret;
mutex_lock(&priv->lock);
- *temp = MCELSIUS((priv->ctemp * 5) - 65);
+ tmp = MCELSIUS((priv->ctemp * 5) - 65);
mutex_unlock(&priv->lock);
+ if ((tmp < MCELSIUS(-45)) || (tmp > MCELSIUS(125))) {
+ struct device *dev = rcar_priv_to_dev(priv);
+
+ dev_err(dev, "it couldn't measure temperature correctly\n");
+ return -EIO;
+ }
+
+ *temp = tmp;
+
return 0;
}
unsigned long flags;
u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
+ if (!rcar_has_irq_support(priv))
+ return;
+
spin_lock_irqsave(&common->lock, flags);
rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
{
struct rcar_thermal_priv *priv;
int cctemp, nctemp;
+ int ret;
priv = container_of(work, struct rcar_thermal_priv, work.work);
rcar_thermal_get_temp(priv->zone, &cctemp);
- rcar_thermal_update_temp(priv);
+ ret = rcar_thermal_update_temp(priv);
+ if (ret < 0)
+ return;
+
rcar_thermal_irq_enable(priv);
rcar_thermal_get_temp(priv->zone, &nctemp);
struct rcar_thermal_priv *priv;
rcar_thermal_for_each_priv(priv, common) {
- if (rcar_has_irq_support(priv))
- rcar_thermal_irq_disable(priv);
+ rcar_thermal_irq_disable(priv);
thermal_zone_device_unregister(priv->zone);
}
mutex_init(&priv->lock);
INIT_LIST_HEAD(&priv->list);
INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
- rcar_thermal_update_temp(priv);
+ ret = rcar_thermal_update_temp(priv);
+ if (ret < 0)
+ goto error_unregister;
priv->zone = thermal_zone_device_register("rcar_thermal",
1, 0, priv,
goto error_unregister;
}
- if (rcar_has_irq_support(priv))
- rcar_thermal_irq_enable(priv);
+ rcar_thermal_irq_enable(priv);
list_move_tail(&priv->list, &common->head);
return ret;
}
-static const struct of_device_id rcar_thermal_dt_ids[] = {
- { .compatible = "renesas,rcar-thermal", },
- {},
-};
-MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
-
static struct platform_driver rcar_thermal_driver = {
.driver = {
.name = "rcar_thermal",
};
/**
- * the system Temperature Sensors tshut(tshut) polarity
+ * The system Temperature Sensors tshut(tshut) polarity
* the bit 8 is tshut polarity.
* 0: low active, 1: high active
*/
};
/**
-* The conversion table has the adc value and temperature.
-* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table)
-* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table)
-*/
+ * The conversion table has the adc value and temperature.
+ * ADC_DECREMENT: the adc value is of diminishing.(e.g. v2_code_table)
+ * ADC_INCREMENT: the adc value is incremental.(e.g. v3_code_table)
+ */
enum adc_sort_mode {
ADC_DECREMENT = 0,
ADC_INCREMENT,
*/
#define SOC_MAX_SENSORS 2
+/**
+ * struct chip_tsadc_table: hold information about chip-specific differences
+ * @id: conversion table
+ * @length: size of conversion table
+ * @data_mask: mask to apply on data inputs
+ * @mode: sort mode of this adc variant (incrementing or decrementing)
+ */
struct chip_tsadc_table {
const struct tsadc_table *id;
-
- /* the array table size*/
unsigned int length;
-
- /* that analogic mask data */
u32 data_mask;
-
- /* the sort mode is adc value that increment or decrement in table */
enum adc_sort_mode mode;
};
#define TSADCV2_SHUT_2GPIO_SRC_EN(chn) BIT(4 + (chn))
#define TSADCV2_SHUT_2CRU_SRC_EN(chn) BIT(8 + (chn))
+#define TSADCV1_INT_PD_CLEAR_MASK ~BIT(16)
#define TSADCV2_INT_PD_CLEAR_MASK ~BIT(8)
#define TSADCV2_DATA_MASK 0xfff
int temp;
};
+/**
+ * Note:
+ * Code to Temperature mapping of the Temperature sensor is a piece wise linear
+ * curve.Any temperature, code faling between to 2 give temperatures can be
+ * linearly interpolated.
+ * Code to Temperature mapping should be updated based on sillcon results.
+ */
+static const struct tsadc_table v1_code_table[] = {
+ {TSADCV3_DATA_MASK, -40000},
+ {436, -40000},
+ {431, -35000},
+ {426, -30000},
+ {421, -25000},
+ {416, -20000},
+ {411, -15000},
+ {406, -10000},
+ {401, -5000},
+ {395, 0},
+ {390, 5000},
+ {385, 10000},
+ {380, 15000},
+ {375, 20000},
+ {370, 25000},
+ {364, 30000},
+ {359, 35000},
+ {354, 40000},
+ {349, 45000},
+ {343, 50000},
+ {338, 55000},
+ {333, 60000},
+ {328, 65000},
+ {322, 70000},
+ {317, 75000},
+ {312, 80000},
+ {307, 85000},
+ {301, 90000},
+ {296, 95000},
+ {291, 100000},
+ {286, 105000},
+ {280, 110000},
+ {275, 115000},
+ {270, 120000},
+ {264, 125000},
+};
+
static const struct tsadc_table v2_code_table[] = {
{TSADCV2_DATA_MASK, -40000},
{3800, -40000},
{TSADCV3_DATA_MASK, 125000},
};
+static const struct tsadc_table v4_code_table[] = {
+ {TSADCV3_DATA_MASK, -40000},
+ {431, -40000},
+ {426, -35000},
+ {421, -30000},
+ {415, -25000},
+ {410, -20000},
+ {405, -15000},
+ {399, -10000},
+ {394, -5000},
+ {389, 0},
+ {383, 5000},
+ {378, 10000},
+ {373, 15000},
+ {367, 20000},
+ {362, 25000},
+ {357, 30000},
+ {351, 35000},
+ {346, 40000},
+ {340, 45000},
+ {335, 50000},
+ {330, 55000},
+ {324, 60000},
+ {319, 65000},
+ {313, 70000},
+ {308, 75000},
+ {302, 80000},
+ {297, 85000},
+ {291, 90000},
+ {286, 95000},
+ {281, 100000},
+ {275, 105000},
+ {270, 110000},
+ {264, 115000},
+ {259, 120000},
+ {253, 125000},
+};
+
static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
int temp)
{
regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
}
+static void rk_tsadcv1_irq_ack(void __iomem *regs)
+{
+ u32 val;
+
+ val = readl_relaxed(regs + TSADCV2_INT_PD);
+ writel_relaxed(val & TSADCV1_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
static void rk_tsadcv2_irq_ack(void __iomem *regs)
{
u32 val;
writel_relaxed(val, regs + TSADCV2_INT_EN);
}
+static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_num = 1, /* one channel for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv2_initialize,
+ .irq_ack = rk_tsadcv1_irq_ack,
+ .control = rk_tsadcv2_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = v1_code_table,
+ .length = ARRAY_SIZE(v1_code_table),
+ .data_mask = TSADCV3_DATA_MASK,
+ .mode = ADC_DECREMENT,
+ },
+};
+
static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
},
};
+static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+ .chn_num = 2, /* two channels for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv2_initialize,
+ .irq_ack = rk_tsadcv1_irq_ack,
+ .control = rk_tsadcv2_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = v4_code_table,
+ .length = ARRAY_SIZE(v4_code_table),
+ .data_mask = TSADCV3_DATA_MASK,
+ .mode = ADC_DECREMENT,
+ },
+};
+
static const struct of_device_id of_rockchip_thermal_match[] = {
+ {
+ .compatible = "rockchip,rk3228-tsadc",
+ .data = (void *)&rk3228_tsadc_data,
+ },
{
.compatible = "rockchip,rk3288-tsadc",
.data = (void *)&rk3288_tsadc_data,
.compatible = "rockchip,rk3368-tsadc",
.data = (void *)&rk3368_tsadc_data,
},
+ {
+ .compatible = "rockchip,rk3399-tsadc",
+ .data = (void *)&rk3399_tsadc_data,
+ },
{ /* end */ },
};
MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
return 0;
}
-/*
+/**
* Reset TSADC Controller, reset all tsadc registers.
*/
static void rockchip_thermal_reset_controller(struct reset_control *reset)
next_target = instance->target;
dev_dbg(&cdev->device, "cur_state=%ld\n", cur_state);
+ if (!instance->initialized) {
+ if (throttle) {
+ next_target = (cur_state + 1) >= instance->upper ?
+ instance->upper :
+ ((cur_state + 1) < instance->lower ?
+ instance->lower : (cur_state + 1));
+ } else {
+ next_target = THERMAL_NO_TARGET;
+ }
+
+ return next_target;
+ }
+
switch (trend) {
case THERMAL_TREND_RAISING:
if (throttle) {
dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n",
old_target, (int)instance->target);
- if (old_target == instance->target)
+ if (instance->initialized && old_target == instance->target)
continue;
/* Activate a passive thermal instance */
instance->target == THERMAL_NO_TARGET)
update_passive_instance(tz, trip_type, -1);
-
+ instance->initialized = true;
instance->cdev->updated = false; /* cdev needs update */
}
#include <linux/of.h>
#include <net/netlink.h>
#include <net/genetlink.h>
+#include <linux/suspend.h>
#define CREATE_TRACE_POINTS
#include <trace/events/thermal.h>
static DEFINE_MUTEX(thermal_list_lock);
static DEFINE_MUTEX(thermal_governor_lock);
+static atomic_t in_suspend;
+
static struct thermal_governor *def_governor;
static struct thermal_governor *__find_governor(const char *name)
mutex_unlock(&tz->lock);
trace_thermal_temperature(tz);
- dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
- tz->last_temperature, tz->temperature);
+ if (tz->last_temperature == THERMAL_TEMP_INVALID)
+ dev_dbg(&tz->device, "last_temperature N/A, current_temperature=%d\n",
+ tz->temperature);
+ else
+ dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
+ tz->last_temperature, tz->temperature);
+}
+
+static void thermal_zone_device_reset(struct thermal_zone_device *tz)
+{
+ struct thermal_instance *pos;
+
+ tz->temperature = THERMAL_TEMP_INVALID;
+ tz->passive = 0;
+ list_for_each_entry(pos, &tz->thermal_instances, tz_node)
+ pos->initialized = false;
}
void thermal_zone_device_update(struct thermal_zone_device *tz)
{
int count;
+ if (atomic_read(&in_suspend))
+ return;
+
if (!tz->ops->get_temp)
return;
return -EINVAL;
ret = tz->ops->set_trip_temp(tz, trip, temperature);
+ if (ret)
+ return ret;
- return ret ? ret : count;
+ thermal_zone_device_update(tz);
+
+ return count;
}
static ssize_t
if (!result) {
list_add_tail(&dev->tz_node, &tz->thermal_instances);
list_add_tail(&dev->cdev_node, &cdev->thermal_instances);
+ atomic_set(&tz->need_update, 1);
}
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
const struct thermal_cooling_device_ops *ops)
{
struct thermal_cooling_device *cdev;
+ struct thermal_zone_device *pos = NULL;
int result;
if (type && strlen(type) >= THERMAL_NAME_LENGTH)
/* Update binding information for 'this' new cdev */
bind_cdev(cdev);
+ mutex_lock(&thermal_list_lock);
+ list_for_each_entry(pos, &thermal_tz_list, node)
+ if (atomic_cmpxchg(&pos->need_update, 1, 0))
+ thermal_zone_device_update(pos);
+ mutex_unlock(&thermal_list_lock);
+
return cdev;
}
tz->trips = trips;
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
+ /* A new thermal zone needs to be updated anyway. */
+ atomic_set(&tz->need_update, 1);
dev_set_name(&tz->device, "thermal_zone%d", tz->id);
result = device_register(&tz->device);
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
- thermal_zone_device_update(tz);
+ thermal_zone_device_reset(tz);
+ /* Update the new thermal zone and mark it as already updated. */
+ if (atomic_cmpxchg(&tz->need_update, 1, 0))
+ thermal_zone_device_update(tz);
return tz;
thermal_gov_power_allocator_unregister();
}
+static int thermal_pm_notify(struct notifier_block *nb,
+ unsigned long mode, void *_unused)
+{
+ struct thermal_zone_device *tz;
+
+ switch (mode) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_RESTORE_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ atomic_set(&in_suspend, 1);
+ break;
+ case PM_POST_HIBERNATION:
+ case PM_POST_RESTORE:
+ case PM_POST_SUSPEND:
+ atomic_set(&in_suspend, 0);
+ list_for_each_entry(tz, &thermal_tz_list, node) {
+ thermal_zone_device_reset(tz);
+ thermal_zone_device_update(tz);
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static struct notifier_block thermal_pm_nb = {
+ .notifier_call = thermal_pm_notify,
+};
+
static int __init thermal_init(void)
{
int result;
if (result)
goto exit_netlink;
+ result = register_pm_notifier(&thermal_pm_nb);
+ if (result)
+ pr_warn("Thermal: Can not register suspend notifier, return %d\n",
+ result);
+
return 0;
exit_netlink:
static void __exit thermal_exit(void)
{
+ unregister_pm_notifier(&thermal_pm_nb);
of_thermal_destroy_zones();
genetlink_exit();
class_unregister(&thermal_class);
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
int trip;
+ bool initialized;
unsigned long upper; /* Highest cooling state for this trip point */
unsigned long lower; /* Lowest cooling state for this trip point */
unsigned long target; /* expected cooling state */
/* Default weight of a bound cooling device */
#define THERMAL_WEIGHT_DEFAULT 0
+/* use value, which < 0K, to indicate an invalid/uninitialized temperature */
+#define THERMAL_TEMP_INVALID -274000
+
/* Unit conversion macros */
#define DECI_KELVIN_TO_CELSIUS(t) ({ \
long _t = (t); \
* @forced_passive: If > 0, temperature at which to switch on all ACPI
* processor cooling devices. Currently only used by the
* step-wise governor.
+ * @need_update: if equals 1, thermal_zone_device_update needs to be invoked.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
* @governor: pointer to the governor for this thermal zone
int emul_temperature;
int passive;
unsigned int forced_passive;
+ atomic_t need_update;
struct thermal_zone_device_ops *ops;
struct thermal_zone_params *tzp;
struct thermal_governor *governor;
projects / cascardo / linux.git / commitdiff