[media] cx25840/cx18: Use standard ordering of mask and shift

Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.

This use has a mask then shift which is not the normal style.

Move the shift before the mask to match nearly all the other
uses in kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index e453a3f..0327032 100644 (file)
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -879,7 +879,7 @@ void cx25840_std_setup(struct i2c_client *client)
        /* Sets horizontal blanking delay and active lines */
        cx25840_write(client, 0x470, hblank);
        cx25840_write(client, 0x471,
-                       0xff & (((hblank >> 8) & 0x3) | (hactive << 4)));
+                     (((hblank >> 8) & 0x3) | (hactive << 4)) & 0xff);
        cx25840_write(client, 0x472, hactive >> 4);
 
        /* Sets burst gate delay */
@@ -888,13 +888,13 @@ void cx25840_std_setup(struct i2c_client *client)
        /* Sets vertical blanking delay and active duration */
        cx25840_write(client, 0x474, vblank);
        cx25840_write(client, 0x475,
-                       0xff & (((vblank >> 8) & 0x3) | (vactive << 4)));
+                     (((vblank >> 8) & 0x3) | (vactive << 4)) & 0xff);
        cx25840_write(client, 0x476, vactive >> 4);
        cx25840_write(client, 0x477, vblank656);
 
        /* Sets src decimation rate */
-       cx25840_write(client, 0x478, 0xff & src_decimation);
-       cx25840_write(client, 0x479, 0xff & (src_decimation >> 8));
+       cx25840_write(client, 0x478, src_decimation & 0xff);
+       cx25840_write(client, 0x479, (src_decimation >> 8) & 0xff);
 
        /* Sets Luma and UV Low pass filters */
        cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
@@ -904,8 +904,8 @@ void cx25840_std_setup(struct i2c_client *client)
 
        /* Sets SC Step*/
        cx25840_write(client, 0x47c, sc);
-       cx25840_write(client, 0x47d, 0xff & sc >> 8);
-       cx25840_write(client, 0x47e, 0xff & sc >> 16);
+       cx25840_write(client, 0x47d, (sc >> 8) & 0xff);
+       cx25840_write(client, 0x47e, (sc >> 16) & 0xff);
 
        /* Sets VBI parameters */
        if (std & V4L2_STD_625_50) {

diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c
index 2d3afe0..45be26c 100644 (file)
--- a/drivers/media/pci/cx18/cx18-av-core.c
+++ b/drivers/media/pci/cx18/cx18-av-core.c
@@ -490,8 +490,8 @@ void cx18_av_std_setup(struct cx18 *cx)
 
        /* Sets horizontal blanking delay and active lines */
        cx18_av_write(cx, 0x470, hblank);
-       cx18_av_write(cx, 0x471, 0xff & (((hblank >> 8) & 0x3) |
-                                               (hactive << 4)));
+       cx18_av_write(cx, 0x471,
+                     (((hblank >> 8) & 0x3) | (hactive << 4)) & 0xff);
        cx18_av_write(cx, 0x472, hactive >> 4);
 
        /* Sets burst gate delay */
@@ -499,14 +499,14 @@ void cx18_av_std_setup(struct cx18 *cx)
 
        /* Sets vertical blanking delay and active duration */
        cx18_av_write(cx, 0x474, vblank);
-       cx18_av_write(cx, 0x475, 0xff & (((vblank >> 8) & 0x3) |
-                                               (vactive << 4)));
+       cx18_av_write(cx, 0x475,
+                     (((vblank >> 8) & 0x3) | (vactive << 4)) & 0xff);
        cx18_av_write(cx, 0x476, vactive >> 4);
        cx18_av_write(cx, 0x477, vblank656);
 
        /* Sets src decimation rate */
-       cx18_av_write(cx, 0x478, 0xff & src_decimation);
-       cx18_av_write(cx, 0x479, 0xff & (src_decimation >> 8));
+       cx18_av_write(cx, 0x478, src_decimation & 0xff);
+       cx18_av_write(cx, 0x479, (src_decimation >> 8) & 0xff);
 
        /* Sets Luma and UV Low pass filters */
        cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
@@ -516,8 +516,8 @@ void cx18_av_std_setup(struct cx18 *cx)
 
        /* Sets SC Step*/
        cx18_av_write(cx, 0x47c, sc);
-       cx18_av_write(cx, 0x47d, 0xff & sc >> 8);
-       cx18_av_write(cx, 0x47e, 0xff & sc >> 16);
+       cx18_av_write(cx, 0x47d, (sc >> 8) & 0xff);
+       cx18_av_write(cx, 0x47e, (sc >> 16) & 0xff);
 
        if (std & V4L2_STD_625_50) {
                state->slicer_line_delay = 1;