drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions

Don't replace the value we got from the I2C layer, just pass it on.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 86eccb1..d348b23 100644 (file)
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -230,7 +230,7 @@ static ssize_t m41t80_sysfs_show_flags(struct device *dev,
 
        val = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
        if (val < 0)
-               return -EIO;
+               return val;
        return sprintf(buf, "%#x\n", val);
 }
 static DEVICE_ATTR(flags, S_IRUGO, m41t80_sysfs_show_flags, NULL);
@@ -250,7 +250,7 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev,
                reg_sqw = M41T80_REG_WDAY;
        val = i2c_smbus_read_byte_data(client, reg_sqw);
        if (val < 0)
-               return -EIO;
+               return val;
        val = (val >> 4) & 0xf;
        switch (val) {
        case 0:
@@ -269,7 +269,7 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
 {
        struct i2c_client *client = to_i2c_client(dev);
        struct m41t80_data *clientdata = i2c_get_clientdata(client);
-       int almon, sqw, reg_sqw;
+       int almon, sqw, reg_sqw, rc;
        int val = simple_strtoul(buf, NULL, 0);
 
        if (!(clientdata->features & M41T80_FEATURE_SQ))
@@ -289,21 +289,30 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
        /* disable SQW, set SQW frequency & re-enable */
        almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
        if (almon < 0)
-               return -EIO;
+               return almon;
        reg_sqw = M41T80_REG_SQW;
        if (clientdata->features & M41T80_FEATURE_SQ_ALT)
                reg_sqw = M41T80_REG_WDAY;
        sqw = i2c_smbus_read_byte_data(client, reg_sqw);
        if (sqw < 0)
-               return -EIO;
+               return sqw;
        sqw = (sqw & 0x0f) | (val << 4);
-       if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
-                                     almon & ~M41T80_ALMON_SQWE) < 0 ||
-           i2c_smbus_write_byte_data(client, reg_sqw, sqw) < 0)
-               return -EIO;
-       if (val && i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
-                                            almon | M41T80_ALMON_SQWE) < 0)
-               return -EIO;
+
+       rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+                                     almon & ~M41T80_ALMON_SQWE);
+       if (rc < 0)
+               return rc;
+
+       if (val) {
+               rc = i2c_smbus_write_byte_data(client, reg_sqw, sqw);
+               if (rc < 0)
+                       return rc;
+
+               rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+                                            almon | M41T80_ALMON_SQWE);
+               if (rc <0)
+                       return rc;
+       }
        return count;
 }
 static DEVICE_ATTR(sqwfreq, S_IRUGO | S_IWUSR,
@@ -665,7 +674,7 @@ static int m41t80_probe(struct i2c_client *client,
 
        if (rc < 0) {
                dev_err(&client->dev, "Can't clear HT bit\n");
-               return -EIO;
+               return rc;
        }
 
        /* Make sure ST (stop) bit is cleared */
@@ -676,7 +685,7 @@ static int m41t80_probe(struct i2c_client *client,
                                              rc & ~M41T80_SEC_ST);
        if (rc < 0) {
                dev_err(&client->dev, "Can't clear ST bit\n");
-               return -EIO;
+               return rc;
        }
 
        rc = m41t80_sysfs_register(&client->dev);