- "samsung,exynos4212-pmu" - for Exynos4212 SoC,
- "samsung,exynos4412-pmu" - for Exynos4412 SoC,
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+ - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
second value must be always "syscon".
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
- bool "Use S3C UART 0 for low-level debug"
+ bool "Use Samsung S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
- bool "Use S3C UART 1 for low-level debug"
+ bool "Use Samsung S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
- bool "Use S3C UART 2 for low-level debug"
+ bool "Use Samsung S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
select DEBUG_EXYNOS_UART
- bool "Use S3C UART 3 for low-level debug"
+ bool "Use Samsung S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 3. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C2410_UART0
depends on ARCH_S3C24XX
select DEBUG_S3C2410_UART
status = "disabled";
};
+ tmu: tmu@100C0000 {
+ compatible = "samsung,exynos3250-tmu";
+ reg = <0x100C0000 0x100>;
+ interrupts = <0 216 0>;
+ clocks = <&cmu CLK_TMU_APBIF>;
+ clock-names = "tmu_apbif";
+ status = "disabled";
+ };
+
gic: interrupt-controller@10481000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
- interrupt-parent = <&gic>;
interrupts = <0 48 0>;
};
};
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
- interrupt-parent = <&gic>;
ranges;
pdma0: pdma@12680000 {
interrupts = <0 109 0>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data &uart0_fctl>;
status = "disabled";
};
interrupts = <0 110 0>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>;
status = "disabled";
};
i2c2_bus: i2c2-bus {
samsung,pin-pud = <0>;
};
-
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
};
i2c@12C60000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
-
- max77686@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
- wakeup-source;
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.8V_LDO_OUT2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "P1.35V_BUCK_OUT6";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "P2.0V_BUCK_OUT7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "P2.85V_BUCK_OUT8";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
- };
- };
};
i2c@12C70000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
-
- trackpad {
- reg = <0x67>;
- compatible = "cypress,cyapa";
- interrupts = <2 0>;
- interrupt-parent = <&gpx1>;
- wakeup-source;
- };
};
i2c@12C80000 {
max77686@09 {
compatible = "maxim,max77686";
reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
voltage-regulators {
ldo1_reg: LDO1 {
};
};
+&i2c_0 {
+ max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+};
+
+&pinctrl_0 {
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
#include "cros-ec-keyboard.dtsi"
interrupts = <0 243 0>;
};
+ pmu_system_controller: system-controller@10D50000 {
+ compatible = "samsung,exynos5260-pmu", "syscon";
+ reg = <0x10D50000 0x10000>;
+ };
+
uart0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
reg = <0x10000000 0x100>;
};
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5410-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
+
mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0xB00>;
#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
soc_is_exynos5420() || soc_is_exynos5800())
-void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-
-struct map_desc;
extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr;
-void exynos_init_io(void);
-void exynos_restart(enum reboot_mode mode, const char *cmd);
+extern void __iomem *pmu_base_addr;
void exynos_sysram_init(void);
-void exynos_cpuidle_init(void);
-void exynos_cpufreq_init(void);
-void exynos_init_late(void);
void exynos_firmware_init(void);
-#ifdef CONFIG_PINCTRL_EXYNOS
extern u32 exynos_get_eint_wake_mask(void);
-#else
-static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
-#endif
#ifdef CONFIG_PM_SLEEP
extern void __init exynos_pm_init(void);
/* PMU(Power Management Unit) support */
-#define PMU_TABLE_END NULL
+#define PMU_TABLE_END (-1U)
enum sys_powerdown {
SYS_AFTR,
};
struct exynos_pmu_conf {
- void __iomem *reg;
+ unsigned int offset;
unsigned int val[NUM_SYS_POWERDOWN];
};
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
+static inline void pmu_raw_writel(u32 val, u32 offset)
+{
+ __raw_writel(val, pmu_base_addr + offset);
+}
+
+static inline u32 pmu_raw_readl(u32 offset)
+{
+ return __raw_readl(pmu_base_addr + offset);
+}
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
+#include <linux/irqchip.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "mfc.h"
#include "regs-pmu.h"
+#include "regs-sys.h"
+
+void __iomem *pmu_base_addr;
static struct map_desc exynos4_iodesc[] __initdata = {
{
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_COMBINER_BASE,
.pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
.pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
.length = 144 * SZ_1K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
},
};
-void exynos_restart(enum reboot_mode mode, const char *cmd)
+static void exynos_restart(enum reboot_mode mode, const char *cmd)
{
struct device_node *np;
u32 val = 0x1;
- void __iomem *addr = EXYNOS_SWRESET;
+ void __iomem *addr = pmu_base_addr + EXYNOS_SWRESET;
if (of_machine_is_compatible("samsung,exynos5440")) {
u32 status;
.id = -1,
};
-void __init exynos_cpuidle_init(void)
-{
- if (soc_is_exynos4210() || soc_is_exynos5250())
- platform_device_register(&exynos_cpuidle);
-}
-
-void __init exynos_cpufreq_init(void)
-{
- platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-}
-
void __iomem *sysram_base_addr;
void __iomem *sysram_ns_base_addr;
}
}
-void __init exynos_init_late(void)
+static void __init exynos_init_late(void)
{
if (of_machine_is_compatible("samsung,exynos5440"))
/* to be supported later */
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
-void __init exynos_init_io(void)
+static void __init exynos_init_io(void)
{
debug_ll_io_init();
exynos_map_io();
}
+static const struct of_device_id exynos_dt_pmu_match[] = {
+ { .compatible = "samsung,exynos3250-pmu" },
+ { .compatible = "samsung,exynos4210-pmu" },
+ { .compatible = "samsung,exynos4212-pmu" },
+ { .compatible = "samsung,exynos4412-pmu" },
+ { .compatible = "samsung,exynos5250-pmu" },
+ { .compatible = "samsung,exynos5260-pmu" },
+ { .compatible = "samsung,exynos5410-pmu" },
+ { .compatible = "samsung,exynos5420-pmu" },
+ { /*sentinel*/ },
+};
+
+static void exynos_map_pmu(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, exynos_dt_pmu_match);
+ if (np)
+ pmu_base_addr = of_iomap(np, 0);
+
+ if (!pmu_base_addr)
+ panic("failed to find exynos pmu register\n");
+}
+
+static void __init exynos_init_irq(void)
+{
+ irqchip_init();
+ /*
+ * Since platsmp.c needs pmu base address by the time
+ * DT is not unflatten so we can't use DT APIs before
+ * init_irq
+ */
+ exynos_map_pmu();
+}
+
static void __init exynos_dt_machine_init(void)
{
struct device_node *i2c_np;
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
- exynos_cpuidle_init();
- exynos_cpufreq_init();
+ if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos5250"))
+ platform_device_register(&exynos_cpuidle);
+
+ platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_early = exynos_firmware_init,
+ .init_irq = exynos_init_irq,
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
/*
- * linux/arch/arm/mach-exynos4/headsmp.S
*
* Cloned from linux/arch/arm/mach-realview/headsmp.S
*
-/* linux arch/arm/mach-exynos4/hotplug.c
- *
+/*
* Cloned from linux/arch/arm/mach-realview/hotplug.c
*
* Copyright (C) 2002 ARM Ltd.
-/* linux/arch/arm/mach-exynos/include/mach/map.h
- *
+/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
#define EXYNOS4_PA_SYSCON 0x10010000
#define EXYNOS5_PA_SYSCON 0x10050100
-#define EXYNOS4_PA_PMU 0x10020000
-#define EXYNOS5_PA_PMU 0x10040000
-
#define EXYNOS4_PA_CMU 0x10030000
#define EXYNOS5_PA_CMU 0x10010000
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
+/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
#define EXYNOS5420_CPUS_PER_CLUSTER 4
#define EXYNOS5420_NR_CLUSTERS 2
+#define EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN BIT(9)
+#define EXYNOS5420_USE_ARM_CORE_DOWN_STATE BIT(29)
+#define EXYNOS5420_USE_L2_COMMON_UP_STATE BIT(30)
+
/*
* The common v7_exit_coherency_flush API could not be used because of the
* Erratum 799270 workaround. This macro is the same as the common one (in
"dsb\n\t" \
"ldmfd sp!, {fp, ip}" \
: \
- : "Ir" (S5P_INFORM0) \
+ : "Ir" (pmu_base_addr + S5P_INFORM0) \
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
"r9", "r10", "lr", "memory")
#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
-static int exynos_cluster_power_control(unsigned int cluster, int enable)
-{
- unsigned int tries = 100;
- unsigned int val;
-
- if (enable) {
- exynos_cluster_power_up(cluster);
- val = S5P_CORE_LOCAL_PWR_EN;
- } else {
- exynos_cluster_power_down(cluster);
- val = 0;
- }
-
- /* Wait until cluster power control is applied */
- while (tries--) {
- if (exynos_cluster_power_state(cluster) == val)
- return 0;
-
- cpu_relax();
- }
- pr_debug("timed out waiting for cluster %u to power %s\n", cluster,
- enable ? "on" : "off");
-
- return -ETIMEDOUT;
-}
-
static int exynos_power_up(unsigned int cpu, unsigned int cluster)
{
unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
- int err = 0;
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
* cores.
*/
if (was_cluster_down)
- err = exynos_cluster_power_control(cluster, 1);
+ exynos_cluster_power_up(cluster);
- if (!err)
- exynos_cpu_power_up(cpunr);
- else
- exynos_cluster_power_control(cluster, 0);
+ exynos_cpu_power_up(cpunr);
} else if (cpu_use_count[cpu][cluster] != 2) {
/*
* The only possible values are:
arch_spin_unlock(&exynos_mcpm_lock);
local_irq_enable();
- return err;
+ return 0;
}
/*
if (cpu_use_count[cpu][cluster] == 0) {
exynos_cpu_power_down(cpunr);
- if (exynos_cluster_unused(cluster))
- /* TODO: Turn off the cluster here to save power. */
+ if (exynos_cluster_unused(cluster)) {
+ exynos_cluster_power_down(cluster);
last_man = true;
+ }
} else if (cpu_use_count[cpu][cluster] == 1) {
/*
* A power_up request went ahead of us.
return -ETIMEDOUT; /* timeout */
}
+static void exynos_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ arch_spin_lock(&exynos_mcpm_lock);
+ if (cpu_use_count[cpu][cluster] == 0)
+ cpu_use_count[cpu][cluster] = 1;
+ arch_spin_unlock(&exynos_mcpm_lock);
+}
+
+static void exynos_suspend(u64 residency)
+{
+ unsigned int mpidr, cpunr;
+
+ exynos_power_down();
+
+ /*
+ * Execution reaches here only if cpu did not power down.
+ * Hence roll back the changes done in exynos_power_down function.
+ *
+ * CAUTION: "This function requires the stack data to be visible through
+ * power down and can only be executed on processors like A15 and A7
+ * that hit the cache with the C bit clear in the SCTLR register."
+ */
+ mpidr = read_cpuid_mpidr();
+ cpunr = exynos_pmu_cpunr(mpidr);
+
+ exynos_cpu_power_up(cpunr);
+}
+
static const struct mcpm_platform_ops exynos_power_ops = {
.power_up = exynos_power_up,
.power_down = exynos_power_down,
.wait_for_powerdown = exynos_wait_for_powerdown,
+ .suspend = exynos_suspend,
+ .powered_up = exynos_powered_up,
};
static void __init exynos_mcpm_usage_count_init(void)
{
struct device_node *node;
void __iomem *ns_sram_base_addr;
+ unsigned int value, i;
int ret;
node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
* To increase the stability of KFC reset we need to program
* the PMU SPARE3 register
*/
- __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+ pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
exynos_mcpm_usage_count_init();
pr_info("Exynos MCPM support installed\n");
+ /*
+ * On Exynos5420/5800 for the A15 and A7 clusters:
+ *
+ * EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN ensures that all the cores
+ * in a cluster are turned off before turning off the cluster L2.
+ *
+ * EXYNOS5420_USE_ARM_CORE_DOWN_STATE ensures that a cores is powered
+ * off before waking it up.
+ *
+ * EXYNOS5420_USE_L2_COMMON_UP_STATE ensures that cluster L2 will be
+ * turned on before the first man is powered up.
+ */
+ for (i = 0; i < EXYNOS5420_NR_CLUSTERS; i++) {
+ value = pmu_raw_readl(EXYNOS_COMMON_OPTION(i));
+ value |= EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN |
+ EXYNOS5420_USE_ARM_CORE_DOWN_STATE |
+ EXYNOS5420_USE_L2_COMMON_UP_STATE;
+ pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
+ }
+
/*
* U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
* as part of secondary_cpu_start(). Let's redirect it to the
-/* linux/arch/arm/mach-exynos4/platsmp.c
- *
+ /*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
#include <asm/smp_scu.h>
#include <asm/firmware.h>
+#include <mach/map.h>
+
#include "common.h"
#include "regs-pmu.h"
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
- return S5P_INFORM5;
+ return pmu_base_addr + S5P_INFORM5;
return sysram_base_addr;
}
#include "common.h"
#include "regs-pmu.h"
+#include "regs-sys.h"
/**
* struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
*/
void exynos_cpu_power_down(int cpu)
{
- __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+ pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
/**
*/
void exynos_cpu_power_up(int cpu)
{
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+ pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
/**
*/
int exynos_cpu_power_state(int cpu)
{
- return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+ return (pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
S5P_CORE_LOCAL_PWR_EN);
}
*/
void exynos_cluster_power_down(int cluster)
{
- __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+ pmu_raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
}
/**
*/
void exynos_cluster_power_up(int cluster)
{
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- EXYNOS_COMMON_CONFIGURATION(cluster));
+ pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_COMMON_CONFIGURATION(cluster));
}
/**
*/
int exynos_cluster_power_state(int cluster)
{
- return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+ return (pmu_raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
S5P_CORE_LOCAL_PWR_EN);
}
#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (sysram_base_addr + 0x24) : S5P_INFORM0))
+ pmu_base_addr + S5P_INFORM7 : \
+ (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (sysram_base_addr + 0x24) : \
+ pmu_base_addr + S5P_INFORM0))
#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (sysram_base_addr + 0x20) : S5P_INFORM1))
+ pmu_base_addr + S5P_INFORM6 : \
+ (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (sysram_base_addr + 0x20) : \
+ pmu_base_addr + S5P_INFORM1))
#define S5P_CHECK_AFTR 0xFCBA0D10
#define S5P_CHECK_SLEEP 0x00000BAD
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos_set_wakeupmask(long mask)
{
- __raw_writel(mask, S5P_WAKEUP_MASK);
+ pmu_raw_writel(mask, S5P_WAKEUP_MASK);
}
static void exynos_cpu_set_boot_vector(long flags)
unsigned int tmp;
/* Set wake-up mask registers */
- __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
- __raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+ pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+ pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (soc_is_exynos5250()) {
s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
/* Disable USE_RETENTION of JPEG_MEM_OPTION */
- tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
+ tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
- __raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
+ pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
}
/* Set value of power down register for sleep mode */
exynos_sys_powerdown_conf(SYS_SLEEP);
- __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+ pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
/* ensure at least INFORM0 has the resume address */
- __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
+ pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
}
static void exynos_pm_central_suspend(void)
unsigned long tmp;
/* Setting Central Sequence Register for power down mode */
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
}
static int exynos_pm_suspend(void)
/* Setting SEQ_OPTION register */
tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
- __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
/* clear the wakeup state register */
- __raw_writel(0x0, S5P_WAKEUP_STAT);
+ pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
/* No need to perform below restore code */
return -1;
}
/* For release retention */
- __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
if (soc_is_exynos5250())
s3c_pm_do_restore(exynos5_sys_save,
early_wakeup:
/* Clear SLEEP mode set in INFORM1 */
- __raw_writel(0x0, S5P_INFORM1);
+ pmu_raw_writel(0x0, S5P_INFORM1);
return;
}
s3c_pm_restore_uarts();
S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
- __raw_readl(S5P_WAKEUP_STAT));
+ pmu_raw_readl(S5P_WAKEUP_STAT));
s3c_pm_check_restore();
gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
/* All wakeup disable */
- tmp = __raw_readl(S5P_WAKEUP_MASK);
+ tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
tmp |= ((0xFF << 8) | (0x1F << 1));
- __raw_writel(tmp, S5P_WAKEUP_MASK);
+ pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
register_syscore_ops(&exynos_pm_syscore_ops);
suspend_set_ops(&exynos_suspend_ops);
#include <linux/of_platform.h>
#include <linux/sched.h>
-#include "regs-pmu.h"
-
+#define INT_LOCAL_PWR_EN 0x7
#define MAX_CLK_PER_DOMAIN 4
/*
}
}
- pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
+ pwr = power_on ? INT_LOCAL_PWR_EN : 0;
__raw_writel(pwr, base);
/* Wait max 1ms */
timeout = 10;
- while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) {
+ while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
if (!timeout) {
op = (power_on) ? "enable" : "disable";
pr_err("Power domain %s %s failed\n", domain->name, op);
no_clk:
platform_set_drvdata(pdev, pd);
- on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+ on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
pm_genpd_init(&pd->pd, NULL, !on);
}
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/bug.h>
#include "common.h"
#include "regs-pmu.h"
static const struct exynos_pmu_conf *exynos_pmu_config;
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
- /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
};
static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
- /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ PMU_TABLE_END,},
};
-static void __iomem * const exynos5_list_both_cnt_feed[] = {
+static unsigned int const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_ARM_COMMON_OPTION,
EXYNOS5_TOP_PWR_SYSMEM_OPTION,
};
-static void __iomem * const exynos5_list_diable_wfi_wfe[] = {
+static unsigned int const exynos5_list_diable_wfi_wfe[] = {
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_FSYS_ARM_OPTION,
EXYNOS5_ISP_ARM_OPTION,
* Enable both SC_FEEDBACK and SC_COUNTER
*/
for (i = 0 ; i < ARRAY_SIZE(exynos5_list_both_cnt_feed) ; i++) {
- tmp = __raw_readl(exynos5_list_both_cnt_feed[i]);
+ tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
tmp |= (EXYNOS5_USE_SC_FEEDBACK |
EXYNOS5_USE_SC_COUNTER);
- __raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
+ pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
}
/*
* SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
*/
- tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
+ tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
- __raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
+ pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
/*
* Disable WFI/WFE on XXX_OPTION
*/
for (i = 0 ; i < ARRAY_SIZE(exynos5_list_diable_wfi_wfe) ; i++) {
- tmp = __raw_readl(exynos5_list_diable_wfi_wfe[i]);
+ tmp = pmu_raw_readl(exynos5_list_diable_wfi_wfe[i]);
tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
EXYNOS5_OPTION_USE_STANDBYWFI);
- __raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
+ pmu_raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
}
}
if (soc_is_exynos5250())
exynos5_init_pmu();
- for (i = 0; (exynos_pmu_config[i].reg != PMU_TABLE_END) ; i++)
- __raw_writel(exynos_pmu_config[i].val[mode],
- exynos_pmu_config[i].reg);
+ for (i = 0; (exynos_pmu_config[i].offset != PMU_TABLE_END) ; i++)
+ pmu_raw_writel(exynos_pmu_config[i].val[mode],
+ exynos_pmu_config[i].offset);
if (soc_is_exynos4412()) {
- for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
- __raw_writel(exynos4412_pmu_config[i].val[mode],
- exynos4412_pmu_config[i].reg);
+ for (i = 0; exynos4412_pmu_config[i].offset != PMU_TABLE_END ; i++)
+ pmu_raw_writel(exynos4412_pmu_config[i].val[mode],
+ exynos4412_pmu_config[i].offset);
}
}
* When SYS_WDTRESET is set, watchdog timer reset request
* is ignored by power management unit.
*/
- value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+ value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
value &= ~EXYNOS5_SYS_WDTRESET;
- __raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+ pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
- value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+ value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
value &= ~EXYNOS5_SYS_WDTRESET;
- __raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+ pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
exynos_pmu_config = exynos5250_pmu_config;
pr_info("EXYNOS5250 PMU Initialize\n");
#ifndef __ASM_ARCH_REGS_PMU_H
#define __ASM_ARCH_REGS_PMU_H __FILE__
-#include <mach/map.h>
-
-#define S5P_PMUREG(x) (S5P_VA_PMU + (x))
-#define S5P_SYSREG(x) (S3C_VA_SYS + (x))
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200)
+#define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200
#define S5P_CENTRAL_LOWPWR_CFG (1 << 16)
-#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208)
+#define S5P_CENTRAL_SEQ_OPTION 0x0208
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
-#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
-#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4)
+#define EXYNOS_SWRESET 0x0400
+#define EXYNOS5440_SWRESET 0x00C4
-#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
-#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
-#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
+#define S5P_WAKEUP_STAT 0x0600
+#define S5P_EINT_WAKEUP_MASK 0x0604
+#define S5P_WAKEUP_MASK 0x0608
-#define S5P_INFORM0 S5P_PMUREG(0x0800)
-#define S5P_INFORM1 S5P_PMUREG(0x0804)
-#define S5P_INFORM5 S5P_PMUREG(0x0814)
-#define S5P_INFORM6 S5P_PMUREG(0x0818)
-#define S5P_INFORM7 S5P_PMUREG(0x081C)
-#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C)
+#define S5P_INFORM0 0x0800
+#define S5P_INFORM1 0x0804
+#define S5P_INFORM5 0x0814
+#define S5P_INFORM6 0x0818
+#define S5P_INFORM7 0x081C
+#define S5P_PMU_SPARE3 0x090C
-#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000)
-#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004)
-#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008)
-#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010)
-#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014)
-#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018)
-#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080)
-#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0)
-#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4)
-#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100)
-#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104)
-#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C)
-#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120)
-#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124)
-#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128)
-#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C)
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138)
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C)
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140)
-#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144)
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
-#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
-#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164)
-#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
-#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
-#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
-#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
-#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
-#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184)
-#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
-#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
-#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
-#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
-#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
-#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
-#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
-#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
-#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
-#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
-#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224)
-#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228)
-#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C)
-#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230)
-#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234)
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240)
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260)
-#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280)
-#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284)
-#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0)
-#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300)
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340)
-#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380)
-#define S5P_TV_LOWPWR S5P_PMUREG(0x1384)
-#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
-#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
-#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
-#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
-#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
-#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
+#define S5P_ARM_CORE0_LOWPWR 0x1000
+#define S5P_DIS_IRQ_CORE0 0x1004
+#define S5P_DIS_IRQ_CENTRAL0 0x1008
+#define S5P_ARM_CORE1_LOWPWR 0x1010
+#define S5P_DIS_IRQ_CORE1 0x1014
+#define S5P_DIS_IRQ_CENTRAL1 0x1018
+#define S5P_ARM_COMMON_LOWPWR 0x1080
+#define S5P_L2_0_LOWPWR 0x10C0
+#define S5P_L2_1_LOWPWR 0x10C4
+#define S5P_CMU_ACLKSTOP_LOWPWR 0x1100
+#define S5P_CMU_SCLKSTOP_LOWPWR 0x1104
+#define S5P_CMU_RESET_LOWPWR 0x110C
+#define S5P_APLL_SYSCLK_LOWPWR 0x1120
+#define S5P_MPLL_SYSCLK_LOWPWR 0x1124
+#define S5P_VPLL_SYSCLK_LOWPWR 0x1128
+#define S5P_EPLL_SYSCLK_LOWPWR 0x112C
+#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR 0x1138
+#define S5P_CMU_RESET_GPSALIVE_LOWPWR 0x113C
+#define S5P_CMU_CLKSTOP_CAM_LOWPWR 0x1140
+#define S5P_CMU_CLKSTOP_TV_LOWPWR 0x1144
+#define S5P_CMU_CLKSTOP_MFC_LOWPWR 0x1148
+#define S5P_CMU_CLKSTOP_G3D_LOWPWR 0x114C
+#define S5P_CMU_CLKSTOP_LCD0_LOWPWR 0x1150
+#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR 0x1158
+#define S5P_CMU_CLKSTOP_GPS_LOWPWR 0x115C
+#define S5P_CMU_RESET_CAM_LOWPWR 0x1160
+#define S5P_CMU_RESET_TV_LOWPWR 0x1164
+#define S5P_CMU_RESET_MFC_LOWPWR 0x1168
+#define S5P_CMU_RESET_G3D_LOWPWR 0x116C
+#define S5P_CMU_RESET_LCD0_LOWPWR 0x1170
+#define S5P_CMU_RESET_MAUDIO_LOWPWR 0x1178
+#define S5P_CMU_RESET_GPS_LOWPWR 0x117C
+#define S5P_TOP_BUS_LOWPWR 0x1180
+#define S5P_TOP_RETENTION_LOWPWR 0x1184
+#define S5P_TOP_PWR_LOWPWR 0x1188
+#define S5P_LOGIC_RESET_LOWPWR 0x11A0
+#define S5P_ONENAND_MEM_LOWPWR 0x11C0
+#define S5P_G2D_ACP_MEM_LOWPWR 0x11C8
+#define S5P_USBOTG_MEM_LOWPWR 0x11CC
+#define S5P_HSMMC_MEM_LOWPWR 0x11D0
+#define S5P_CSSYS_MEM_LOWPWR 0x11D4
+#define S5P_SECSS_MEM_LOWPWR 0x11D8
+#define S5P_PAD_RETENTION_DRAM_LOWPWR 0x1200
+#define S5P_PAD_RETENTION_MAUDIO_LOWPWR 0x1204
+#define S5P_PAD_RETENTION_GPIO_LOWPWR 0x1220
+#define S5P_PAD_RETENTION_UART_LOWPWR 0x1224
+#define S5P_PAD_RETENTION_MMCA_LOWPWR 0x1228
+#define S5P_PAD_RETENTION_MMCB_LOWPWR 0x122C
+#define S5P_PAD_RETENTION_EBIA_LOWPWR 0x1230
+#define S5P_PAD_RETENTION_EBIB_LOWPWR 0x1234
+#define S5P_PAD_RETENTION_ISOLATION_LOWPWR 0x1240
+#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR 0x1260
+#define S5P_XUSBXTI_LOWPWR 0x1280
+#define S5P_XXTI_LOWPWR 0x1284
+#define S5P_EXT_REGULATOR_LOWPWR 0x12C0
+#define S5P_GPIO_MODE_LOWPWR 0x1300
+#define S5P_GPIO_MODE_MAUDIO_LOWPWR 0x1340
+#define S5P_CAM_LOWPWR 0x1380
+#define S5P_TV_LOWPWR 0x1384
+#define S5P_MFC_LOWPWR 0x1388
+#define S5P_G3D_LOWPWR 0x138C
+#define S5P_LCD0_LOWPWR 0x1390
+#define S5P_MAUDIO_LOWPWR 0x1398
+#define S5P_GPS_LOWPWR 0x139C
+#define S5P_GPS_ALIVE_LOWPWR 0x13A0
-#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
+#define EXYNOS_ARM_CORE0_CONFIGURATION 0x2000
#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \
(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
#define EXYNOS_ARM_CORE_STATUS(_nr) \
(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500)
+#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500
#define EXYNOS_COMMON_CONFIGURATION(_nr) \
(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
#define EXYNOS_COMMON_STATUS(_nr) \
(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
+#define EXYNOS_COMMON_OPTION(_nr) \
+ (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
-#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
-#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128)
-#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148)
-#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168)
-#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188)
-#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
+#define S5P_PAD_RET_MAUDIO_OPTION 0x3028
+#define S5P_PAD_RET_GPIO_OPTION 0x3108
+#define S5P_PAD_RET_UART_OPTION 0x3128
+#define S5P_PAD_RET_MMCA_OPTION 0x3148
+#define S5P_PAD_RET_MMCB_OPTION 0x3168
+#define S5P_PAD_RET_EBIA_OPTION 0x3188
+#define S5P_PAD_RET_EBIB_OPTION 0x31A8
#define S5P_CORE_LOCAL_PWR_EN 0x3
-#define S5P_INT_LOCAL_PWR_EN 0x7
/* Only for EXYNOS4210 */
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
-#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
-#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
-#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154
+#define S5P_CMU_RESET_LCD1_LOWPWR 0x1174
+#define S5P_MODIMIF_MEM_LOWPWR 0x11C4
+#define S5P_PCIE_MEM_LOWPWR 0x11E0
+#define S5P_SATA_MEM_LOWPWR 0x11E4
+#define S5P_LCD1_LOWPWR 0x1394
/* Only for EXYNOS4x12 */
-#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
-#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
-#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
-#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110)
-#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114)
-#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C)
-#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130)
-#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174)
-#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190)
-#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194)
-#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198)
-#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4)
-#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0)
-#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4)
-#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4)
-#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC)
-#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C)
-#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250)
-#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320)
-#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344)
-#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348)
-#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394)
-#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0)
-#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4)
-#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8)
-#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC)
-#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0)
+#define S5P_ISP_ARM_LOWPWR 0x1050
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR 0x1054
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR 0x1058
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR 0x1110
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR 0x1114
+#define S5P_CMU_RESET_COREBLK_LOWPWR 0x111C
+#define S5P_MPLLUSER_SYSCLK_LOWPWR 0x1130
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR 0x1154
+#define S5P_CMU_RESET_ISP_LOWPWR 0x1174
+#define S5P_TOP_BUS_COREBLK_LOWPWR 0x1190
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR 0x1194
+#define S5P_TOP_PWR_COREBLK_LOWPWR 0x1198
+#define S5P_OSCCLK_GATE_LOWPWR 0x11A4
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR 0x11B0
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR 0x11B4
+#define S5P_HSI_MEM_LOWPWR 0x11C4
+#define S5P_ROTATOR_MEM_LOWPWR 0x11DC
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR 0x123C
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR 0x1250
+#define S5P_GPIO_MODE_COREBLK_LOWPWR 0x1320
+#define S5P_TOP_ASB_RESET_LOWPWR 0x1344
+#define S5P_TOP_ASB_ISOLATION_LOWPWR 0x1348
+#define S5P_ISP_LOWPWR 0x1394
+#define S5P_DRAM_FREQ_DOWN_LOWPWR 0x13B0
+#define S5P_DDRPHY_DLLOFF_LOWPWR 0x13B4
+#define S5P_CMU_SYSCLK_ISP_LOWPWR 0x13B8
+#define S5P_CMU_SYSCLK_GPS_LOWPWR 0x13BC
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR 0x13C0
-#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608)
-#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628)
-#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08)
-#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28)
-#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48)
-#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68)
-#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88)
-#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8)
-#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
-#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
+#define S5P_ARM_L2_0_OPTION 0x2608
+#define S5P_ARM_L2_1_OPTION 0x2628
+#define S5P_ONENAND_MEM_OPTION 0x2E08
+#define S5P_HSI_MEM_OPTION 0x2E28
+#define S5P_G2D_ACP_MEM_OPTION 0x2E48
+#define S5P_USBOTG_MEM_OPTION 0x2E68
+#define S5P_HSMMC_MEM_OPTION 0x2E88
+#define S5P_CSSYS_MEM_OPTION 0x2EA8
+#define S5P_SECSS_MEM_OPTION 0x2EC8
+#define S5P_ROTATOR_MEM_OPTION 0x2F48
/* Only for EXYNOS4412 */
-#define S5P_ARM_CORE2_LOWPWR S5P_PMUREG(0x1020)
-#define S5P_DIS_IRQ_CORE2 S5P_PMUREG(0x1024)
-#define S5P_DIS_IRQ_CENTRAL2 S5P_PMUREG(0x1028)
-#define S5P_ARM_CORE3_LOWPWR S5P_PMUREG(0x1030)
-#define S5P_DIS_IRQ_CORE3 S5P_PMUREG(0x1034)
-#define S5P_DIS_IRQ_CENTRAL3 S5P_PMUREG(0x1038)
+#define S5P_ARM_CORE2_LOWPWR 0x1020
+#define S5P_DIS_IRQ_CORE2 0x1024
+#define S5P_DIS_IRQ_CENTRAL2 0x1028
+#define S5P_ARM_CORE3_LOWPWR 0x1030
+#define S5P_DIS_IRQ_CORE3 0x1034
+#define S5P_DIS_IRQ_CENTRAL3 0x1038
/* For EXYNOS5 */
-#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234)
-
-#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408)
-#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C)
+#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
+#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
#define EXYNOS5_SYS_WDTRESET (1 << 20)
-#define EXYNOS5_ARM_CORE0_SYS_PWR_REG S5P_PMUREG(0x1000)
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1004)
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1008)
-#define EXYNOS5_ARM_CORE1_SYS_PWR_REG S5P_PMUREG(0x1010)
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1014)
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1018)
-#define EXYNOS5_FSYS_ARM_SYS_PWR_REG S5P_PMUREG(0x1040)
-#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1048)
-#define EXYNOS5_ISP_ARM_SYS_PWR_REG S5P_PMUREG(0x1050)
-#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1054)
-#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1058)
-#define EXYNOS5_ARM_COMMON_SYS_PWR_REG S5P_PMUREG(0x1080)
-#define EXYNOS5_ARM_L2_SYS_PWR_REG S5P_PMUREG(0x10C0)
-#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG S5P_PMUREG(0x1100)
-#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG S5P_PMUREG(0x1104)
-#define EXYNOS5_CMU_RESET_SYS_PWR_REG S5P_PMUREG(0x110C)
-#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1120)
-#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1124)
-#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x112C)
-#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG S5P_PMUREG(0x1130)
-#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG S5P_PMUREG(0x1134)
-#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG S5P_PMUREG(0x1138)
-#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1140)
-#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1144)
-#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1148)
-#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x114C)
-#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1150)
-#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1154)
-#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1164)
-#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1170)
-#define EXYNOS5_TOP_BUS_SYS_PWR_REG S5P_PMUREG(0x1180)
-#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG S5P_PMUREG(0x1184)
-#define EXYNOS5_TOP_PWR_SYS_PWR_REG S5P_PMUREG(0x1188)
-#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1190)
-#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1194)
-#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1198)
-#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG S5P_PMUREG(0x11A0)
-#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG S5P_PMUREG(0x11A4)
-#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x11B0)
-#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x11B4)
-#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG S5P_PMUREG(0x11C0)
-#define EXYNOS5_G2D_MEM_SYS_PWR_REG S5P_PMUREG(0x11C8)
-#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG S5P_PMUREG(0x11CC)
-#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG S5P_PMUREG(0x11D0)
-#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG S5P_PMUREG(0x11D4)
-#define EXYNOS5_SECSS_MEM_SYS_PWR_REG S5P_PMUREG(0x11D8)
-#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG S5P_PMUREG(0x11DC)
-#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG S5P_PMUREG(0x11E0)
-#define EXYNOS5_INTROM_MEM_SYS_PWR_REG S5P_PMUREG(0x11E4)
-#define EXYNOS5_JPEG_MEM_SYS_PWR_REG S5P_PMUREG(0x11E8)
-#define EXYNOS5_HSI_MEM_SYS_PWR_REG S5P_PMUREG(0x11EC)
-#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG S5P_PMUREG(0x11F4)
-#define EXYNOS5_SATA_MEM_SYS_PWR_REG S5P_PMUREG(0x11FC)
-#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG S5P_PMUREG(0x1200)
-#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG S5P_PMUREG(0x1204)
-#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG S5P_PMUREG(0x1208)
-#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG S5P_PMUREG(0x1220)
-#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG S5P_PMUREG(0x1224)
-#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG S5P_PMUREG(0x1228)
-#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG S5P_PMUREG(0x122C)
-#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG S5P_PMUREG(0x1230)
-#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG S5P_PMUREG(0x1234)
-#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG S5P_PMUREG(0x1238)
-#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x123C)
-#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG S5P_PMUREG(0x1240)
-#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1250)
-#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG S5P_PMUREG(0x1260)
-#define EXYNOS5_XUSBXTI_SYS_PWR_REG S5P_PMUREG(0x1280)
-#define EXYNOS5_XXTI_SYS_PWR_REG S5P_PMUREG(0x1284)
-#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG S5P_PMUREG(0x12C0)
-#define EXYNOS5_GPIO_MODE_SYS_PWR_REG S5P_PMUREG(0x1300)
-#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1320)
-#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG S5P_PMUREG(0x1340)
-#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG S5P_PMUREG(0x1344)
-#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG S5P_PMUREG(0x1348)
-#define EXYNOS5_GSCL_SYS_PWR_REG S5P_PMUREG(0x1400)
-#define EXYNOS5_ISP_SYS_PWR_REG S5P_PMUREG(0x1404)
-#define EXYNOS5_MFC_SYS_PWR_REG S5P_PMUREG(0x1408)
-#define EXYNOS5_G3D_SYS_PWR_REG S5P_PMUREG(0x140C)
-#define EXYNOS5_DISP1_SYS_PWR_REG S5P_PMUREG(0x1414)
-#define EXYNOS5_MAU_SYS_PWR_REG S5P_PMUREG(0x1418)
-#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG S5P_PMUREG(0x1480)
-#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG S5P_PMUREG(0x1484)
-#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG S5P_PMUREG(0x1488)
-#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG S5P_PMUREG(0x148C)
-#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG S5P_PMUREG(0x1494)
-#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG S5P_PMUREG(0x1498)
-#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG S5P_PMUREG(0x14C0)
-#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG S5P_PMUREG(0x14C4)
-#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG S5P_PMUREG(0x14C8)
-#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG S5P_PMUREG(0x14CC)
-#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG S5P_PMUREG(0x14D4)
-#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG S5P_PMUREG(0x14D8)
-#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG S5P_PMUREG(0x1580)
-#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG S5P_PMUREG(0x1584)
-#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG S5P_PMUREG(0x1588)
-#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG S5P_PMUREG(0x158C)
-#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG S5P_PMUREG(0x1594)
-#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG S5P_PMUREG(0x1598)
+#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008
+#define EXYNOS5_ARM_CORE1_SYS_PWR_REG 0x1010
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018
+#define EXYNOS5_FSYS_ARM_SYS_PWR_REG 0x1040
+#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG 0x1048
+#define EXYNOS5_ISP_ARM_SYS_PWR_REG 0x1050
+#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054
+#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058
+#define EXYNOS5_ARM_COMMON_SYS_PWR_REG 0x1080
+#define EXYNOS5_ARM_L2_SYS_PWR_REG 0x10C0
+#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG 0x1100
+#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG 0x1104
+#define EXYNOS5_CMU_RESET_SYS_PWR_REG 0x110C
+#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG 0x1120
+#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG 0x1124
+#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG 0x112C
+#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG 0x1130
+#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG 0x1134
+#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG 0x1138
+#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG 0x1140
+#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG 0x1144
+#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG 0x1148
+#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG 0x114C
+#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG 0x1150
+#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG 0x1154
+#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1164
+#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1170
+#define EXYNOS5_TOP_BUS_SYS_PWR_REG 0x1180
+#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG 0x1184
+#define EXYNOS5_TOP_PWR_SYS_PWR_REG 0x1188
+#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG 0x1190
+#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG 0x1194
+#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG 0x1198
+#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG 0x11A0
+#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG 0x11A4
+#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG 0x11B0
+#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG 0x11B4
+#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG 0x11C0
+#define EXYNOS5_G2D_MEM_SYS_PWR_REG 0x11C8
+#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG 0x11CC
+#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG 0x11D0
+#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG 0x11D4
+#define EXYNOS5_SECSS_MEM_SYS_PWR_REG 0x11D8
+#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG 0x11DC
+#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG 0x11E0
+#define EXYNOS5_INTROM_MEM_SYS_PWR_REG 0x11E4
+#define EXYNOS5_JPEG_MEM_SYS_PWR_REG 0x11E8
+#define EXYNOS5_HSI_MEM_SYS_PWR_REG 0x11EC
+#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG 0x11F4
+#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC
+#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
+#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204
+#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG 0x1208
+#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
+#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224
+#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228
+#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C
+#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230
+#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234
+#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG 0x1238
+#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG 0x123C
+#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG 0x1240
+#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG 0x1250
+#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG 0x1260
+#define EXYNOS5_XUSBXTI_SYS_PWR_REG 0x1280
+#define EXYNOS5_XXTI_SYS_PWR_REG 0x1284
+#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG 0x12C0
+#define EXYNOS5_GPIO_MODE_SYS_PWR_REG 0x1300
+#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG 0x1320
+#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG 0x1340
+#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG 0x1344
+#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348
+#define EXYNOS5_GSCL_SYS_PWR_REG 0x1400
+#define EXYNOS5_ISP_SYS_PWR_REG 0x1404
+#define EXYNOS5_MFC_SYS_PWR_REG 0x1408
+#define EXYNOS5_G3D_SYS_PWR_REG 0x140C
+#define EXYNOS5_DISP1_SYS_PWR_REG 0x1414
+#define EXYNOS5_MAU_SYS_PWR_REG 0x1418
+#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG 0x1480
+#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1484
+#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1488
+#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x148C
+#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1494
+#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1498
+#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG 0x14C0
+#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG 0x14C4
+#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG 0x14C8
+#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG 0x14CC
+#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D4
+#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D8
+#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG 0x1580
+#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG 0x1584
+#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG 0x1588
+#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG 0x158C
+#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG 0x1594
+#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG 0x1598
-#define EXYNOS5_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
-#define EXYNOS5_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
-#define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208)
-#define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288)
-#define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
-#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608)
-#define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
-#define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8)
-#define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48)
-#define EXYNOS5_GSCL_OPTION S5P_PMUREG(0x4008)
-#define EXYNOS5_ISP_OPTION S5P_PMUREG(0x4028)
-#define EXYNOS5_MFC_OPTION S5P_PMUREG(0x4048)
-#define EXYNOS5_G3D_OPTION S5P_PMUREG(0x4068)
-#define EXYNOS5_DISP1_OPTION S5P_PMUREG(0x40A8)
-#define EXYNOS5_MAU_OPTION S5P_PMUREG(0x40C8)
+#define EXYNOS5_ARM_CORE0_OPTION 0x2008
+#define EXYNOS5_ARM_CORE1_OPTION 0x2088
+#define EXYNOS5_FSYS_ARM_OPTION 0x2208
+#define EXYNOS5_ISP_ARM_OPTION 0x2288
+#define EXYNOS5_ARM_COMMON_OPTION 0x2408
+#define EXYNOS5_ARM_L2_OPTION 0x2608
+#define EXYNOS5_TOP_PWR_OPTION 0x2C48
+#define EXYNOS5_TOP_PWR_SYSMEM_OPTION 0x2CC8
+#define EXYNOS5_JPEG_MEM_OPTION 0x2F48
+#define EXYNOS5_GSCL_OPTION 0x4008
+#define EXYNOS5_ISP_OPTION 0x4028
+#define EXYNOS5_MFC_OPTION 0x4048
+#define EXYNOS5_G3D_OPTION 0x4068
+#define EXYNOS5_DISP1_OPTION 0x40A8
+#define EXYNOS5_MAU_OPTION 0x40C8
#define EXYNOS5_USE_SC_FEEDBACK (1 << 1)
#define EXYNOS5_USE_SC_COUNTER (1 << 0)
#define EXYNOS5420_SWRESET_KFC_SEL 0x3
+#include <asm/cputype.h>
+#define MAX_CPUS_IN_CLUSTER 4
+
+static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
+{
+ return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
+ + MPIDR_AFFINITY_LEVEL(mpidr, 0));
+}
+
#endif /* __ASM_ARCH_REGS_PMU_H */
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - system register definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SYS_H
+#define __ASM_ARCH_REGS_SYS_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SYSREG(x) (S3C_VA_SYS + (x))
+
+/* For EXYNOS5 */
+#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234)
+
+#endif /* __ASM_ARCH_REGS_SYS_H */
#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
#define S5P_VA_CMU S3C_ADDR(0x02100000)
-#define S5P_VA_PMU S3C_ADDR(0x02180000)
#define S5P_VA_GPIO S3C_ADDR(0x02200000)
#define S5P_VA_GPIO1 S5P_VA_GPIO
#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
config ARM_BIG_LITTLE_CPUIDLE
bool "Support for ARM big.LITTLE processors"
- depends on ARCH_VEXPRESS_TC2_PM
+ depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
help
return 0;
}
+static const struct of_device_id compatible_machine_match[] = {
+ { .compatible = "arm,vexpress,v2p-ca15_a7" },
+ { .compatible = "samsung,exynos5420" },
+ {},
+};
+
static int __init bl_idle_init(void)
{
int ret;
+ struct device_node *root = of_find_node_by_path("/");
+
+ if (!root)
+ return -ENODEV;
/*
* Initialize the driver just for a compliant set of machines
*/
- if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+ if (!of_match_node(compatible_machine_match, root))
return -ENODEV;
/*
* For now the differentiation between little and big cores
projects / cascardo / linux.git / commitdiff