ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late

The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 9ef4640..7ba651a 100644 (file)
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
-       int ret;
        imx27_soc_init();
 
        mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
                "mx27pdk");
-       mx27_3ds_sdhc1_enable_level_translator();
        imx27_add_imx_uart0(&uart_pdata);
        imx27_add_fec(NULL);
        imx27_add_imx_keypad(&mx27_3ds_keymap_data);
-       imx27_add_mxc_mmc(0, &sdhc1_pdata);
        imx27_add_imx2_wdt();
+
+       imx27_add_spi_imx1(&spi2_pdata);
+       imx27_add_spi_imx0(&spi1_pdata);
+
+       imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+       platform_add_devices(devices, ARRAY_SIZE(devices));
+       imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+       imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+}
+
+static void __init mx27pdk_late_init(void)
+{
+       int ret;
+
+       mx27_3ds_sdhc1_enable_level_translator();
+       imx27_add_mxc_mmc(0, &sdhc1_pdata);
+
        otg_phy_init();
 
        if (otg_mode_host) {
@@ -509,17 +524,12 @@ static void __init mx27pdk_init(void)
        if (!otg_mode_host)
                imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
-       imx27_add_spi_imx1(&spi2_pdata);
-       imx27_add_spi_imx0(&spi1_pdata);
        mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
        spi_register_board_info(mx27_3ds_spi_devs,
-                                               ARRAY_SIZE(mx27_3ds_spi_devs));
+                               ARRAY_SIZE(mx27_3ds_spi_devs));
 
        if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
                pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-       imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       imx27_add_imx_fb(&mx27_3ds_fb_data);
 
        ret = gpio_request_array(mx27_3ds_camera_gpios,
                                 ARRAY_SIZE(mx27_3ds_camera_gpios));
@@ -529,7 +539,6 @@ static void __init mx27pdk_init(void)
        }
 
        imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
-       imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
 
        imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
@@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
        .init_irq = mx27_init_irq,
        .init_time      = mx27pdk_timer_init,
        .init_machine = mx27pdk_init,
+       .init_late      = mx27pdk_late_init,
        .restart        = mxc_restart,
 MACHINE_END