ARM: dts: kirkwood: Add address to ethernet-phy unit name

PHYs have an address on the mdio bus. So the unit name should contain
an address. This is complicated in that some .dtsi files contain the
node, but the reg is set in the .dts file. In this case, use the
abstract address X.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index b4d5926..282605f 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -83,7 +83,7 @@
 &mdio {
        status = "okay";
 
-       ethphy0: ethernet-phy {
+       ethphy0: ethernet-phy@X {
                 /* overwrite reg property in board file */
        };
 };

diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index af5ce85..860c6d7 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -217,7 +217,7 @@
 &mdio {
        status = "okay";
 
-       ethphy0: ethernet-phy {
+       ethphy0: ethernet-phy@8 {
                device_type = "ethernet-phy";
                reg = <8>;
        };

diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 0e46560..b3f7538 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -94,7 +94,7 @@
 &mdio {
        status = "okay";
 
-       ethphy0: ethernet-phy {
+       ethphy0: ethernet-phy@X {
                 /* overwrite reg property in board file */
        };
 };