*.o.*
*.a
*.s
-*.ko.unsigned
-*.ko.stripped
-*.ko.stripped.dig
-*.ko.stripped.sig
*.ko
*.so
*.so.dbg
extra_certificates
signing_key.priv
signing_key.x509
-signing_key.x509.keyid
-signing_key.x509.signer
x509.genkey
330/230 125
E680/660/640/620 90
E680T/660T/640T/620T 110
+ CE4170/4150/4110 110
45nm Core2 Processors
Solo ULV SU3500/3300 100
* Add the driver to Kconfig and Makefile in alphabetical order.
-* Make sure that all dependencies are listed in Kconfig. For new drivers, it
- is most likely prudent to add a dependency on EXPERIMENTAL.
+* Make sure that all dependencies are listed in Kconfig.
* Avoid forward declarations if you can. Rearrange the code if necessary.
ACPI
M: Len Brown <lenb@kernel.org>
+M: Rafael J. Wysocki <rjw@sisk.pl>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
Q: http://patchwork.kernel.org/project/linux-acpi/list/
S: Maintained
F: drivers/media/usb/uvc/
+USB WEBCAM GADGET
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/gadget/*uvc*.c
+F: drivers/usb/gadget/webcam.c
+
USB WIRELESS RNDIS DRIVER (rndis_wlan)
M: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
L: linux-wireless@vger.kernel.org
export mod_strip_cmd
+ifeq ($(CONFIG_MODULE_SIG),y)
+MODSECKEY = ./signing_key.priv
+MODPUBKEY = ./signing_key.x509
+export MODPUBKEY
+mod_sign_cmd = perl $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY)
+else
+mod_sign_cmd = true
+endif
+export mod_sign_cmd
+
+
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
exynos4210-trats.dtb \
exynos5250-smdk5250.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+ integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
compatible = "marvell,dove";
model = "Marvell Armada 88AP510 SoC";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xf1020204 0x04>,
- <0xf1020214 0x04>;
- };
-
- mbus@f1000000 {
+ soc@f1000000 {
compatible = "simple-bus";
- ranges = <0 0xf1000000 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */
+ 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */
+ 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */
+ 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */
+ 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */
+ 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */
+ 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */
+ 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */
+
+ l2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0>;
+ };
+
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20204 0x04>, <0x20214 0x04>;
+ };
uart0: serial@12000 {
compatible = "ns16550a";
status = "disabled";
};
- wdt: wdt@20300 {
- compatible = "marvell,orion-wdt";
- reg = <0x20300 0x28>;
- };
-
gpio0: gpio@d0400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
nr-ports = <1>;
status = "disabled";
};
+
+ crypto: crypto@30000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x30000 0x10000>,
+ <0xc8000000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <31>;
+ status = "okay";
+ };
};
};
pinctrl_hog: hoggrp {
fsl,pins = <
176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ >;
+ };
+ };
+
+ arm2 {
+ pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+ fsl,pins = <
1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
>;
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <®_3p3v>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
+ pinctrl-0 = <&pinctrl_usdhc3_1
+ &pinctrl_usdhc3_arm2>;
status = "okay";
};
#size-cells = <0>;
button@1 {
label = "Function Button";
- linux,code = <132>;
+ linux,code = <357>;
gpios = <&gpio1 9 1>;
};
button@2 {
label = "Power-on Switch";
- linux,code = <116>;
+ linux,code = <0>;
+ linux,input-type = <5>;
gpios = <&gpio1 10 1>;
};
button@3 {
label = "Power-auto Switch";
- linux,code = <142>;
+ linux,code = <1>;
+ linux,input-type = <5>;
gpios = <&gpio1 11 1>;
};
};
compatible = "gpio-leds";
led@1 {
- label = "lschlv2:blue:func";
+ label = "lsxl:blue:func";
gpios = <&gpio1 4 1>;
};
led@2 {
- label = "lschlv2:red:alarm";
+ label = "lsxl:red:alarm";
gpios = <&gpio1 5 1>;
};
led@3 {
- label = "lschlv2:amber:info";
+ label = "lsxl:amber:info";
gpios = <&gpio1 6 1>;
};
led@4 {
- label = "lschlv2:blue:power";
+ label = "lsxl:blue:power";
gpios = <&gpio1 7 1>;
linux,default-trigger = "default-on";
};
led@5 {
- label = "lschlv2:red:func";
+ label = "lsxl:red:func";
gpios = <&gpio1 16 1>;
};
};
ehci@d8007100 {
compatible = "via,vt8500-ehci";
reg = <0xd8007100 0x200>;
- interrupts = <43>;
+ interrupts = <1>;
};
uhci@d8007300 {
compatible = "platform-uhci";
reg = <0xd8007300 0x200>;
- interrupts = <43>;
+ interrupts = <0>;
};
fb@d8050800 {
#include <linux/irq.h>
#include <plat/time.h>
#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/irq.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
orion_clkdev_add(NULL, "orion-ehci.0", usb0);
orion_clkdev_add(NULL, "orion-ehci.1", usb1);
- orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
- orion_clkdev_add("0", "sata_mv.0", sata);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge);
+ orion_clkdev_add(NULL, "sata_mv.0", sata);
orion_clkdev_add("0", "pcie", pex0);
orion_clkdev_add("1", "pcie", pex1);
orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
(dove_tclk + 499999) / 1000000);
#ifdef CONFIG_CACHE_TAUROS2
- tauros2_init();
+ tauros2_init(0);
#endif
dove_setup_cpu_mbus();
dove_ehci0_init();
dove_ehci1_init();
dove_pcie_init(1, 1);
- dove_crypto_init();
of_platform_populate(NULL, of_default_bus_match_table,
dove_auxdata_lookup, NULL);
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/clk.h>
#include <video/vga.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
if (orion_pcie_link_up(base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+ struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0"));
+
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
printk(KERN_INFO "link up\n");
kirkwood_setup_cpu_mbus();
-#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
-#endif
/* Setup root of clk tree */
kirkwood_clk_init();
void __init kirkwood_l2_init(void)
{
+#ifdef CONFIG_CACHE_FEROCEON_L2
#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
feroceon_l2_init(1);
writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
feroceon_l2_init(0);
#endif
+#endif
}
void __init kirkwood_init(void)
kirkwood_setup_cpu_mbus();
-#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
-#endif
/* Setup root of clk tree */
kirkwood_clk_init();
CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X),
CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X),
CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X),
- CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X),
+ CLK("omap-gpmc", "fck", &dummy_ck, CK_443X),
CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X),
CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X),
CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X),
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
return -EINVAL;
+ spin_lock_irqsave(&clkdm->lock, flags);
+
/*
* For arch's with no autodeps, clkcm_clk_enable
* should be called for every clock instance or hwmod that is
* enabled, so the clkdm can be force woken up.
*/
- if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+ if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
+ }
- spin_lock_irqsave(&clkdm->lock, flags);
arch_clkdm->clkdm_clk_enable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
+ spin_lock_irqsave(&clkdm->lock, flags);
+
if (atomic_read(&clkdm->usecount) == 0) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
WARN_ON(1); /* underflow */
return -ERANGE;
}
- if (atomic_dec_return(&clkdm->usecount) > 0)
+ if (atomic_dec_return(&clkdm->usecount) > 0) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
+ }
- spin_lock_irqsave(&clkdm->lock, flags);
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
oh = omap_hwmod_lookup("dmic");
if (!oh) {
- printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+ pr_err("Could not look up dmic hw_mod\n");
return;
}
}
-static void __devinit gpmc_mem_init(void)
+static int __devinit gpmc_mem_init(void)
{
- int cs;
+ int cs, rc;
unsigned long boot_rom_space = 0;
/* never allocate the first page, to facilitate bug detection;
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
- if (gpmc_cs_insert_mem(cs, base, size) < 0)
- BUG();
+ rc = gpmc_cs_insert_mem(cs, base, size);
+ if (IS_ERR_VALUE(rc)) {
+ while (--cs >= 0)
+ if (gpmc_cs_mem_enabled(cs))
+ gpmc_cs_delete_mem(cs);
+ return rc;
+ }
}
+
+ return 0;
}
static __devinit int gpmc_probe(struct platform_device *pdev)
{
+ int rc;
u32 l;
struct resource *res;
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
- gpmc_mem_init();
+ rc = gpmc_mem_init();
+ if (IS_ERR_VALUE(rc)) {
+ clk_disable_unprepare(gpmc_l3_clk);
+ clk_put(gpmc_l3_clk);
+ dev_err(gpmc_dev, "failed to reserve memory\n");
+ return rc;
+ }
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
- OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
+ OMAP44XX_LOCAL_TWD_BASE, 29);
#endif
static void __init omap4_timer_init(void)
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
};
-static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
+static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
- l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+ l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
#include <linux/clkdev.h>
#include <mach/common.h>
-#define FRQMR 0xffc80014
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR3 0xffc8003c
-#define MSTPSR1 0xffc80044
-#define MSTPSR4 0xffc80048
-#define MSTPSR6 0xffc8004c
-#define MSTPCR4 0xffc80050
-#define MSTPCR5 0xffc80054
-#define MSTPCR6 0xffc80058
-#define MSTPCR7 0xffc80040
+#define FRQMR IOMEM(0xffc80014)
+#define MSTPCR0 IOMEM(0xffc80030)
+#define MSTPCR1 IOMEM(0xffc80034)
+#define MSTPCR3 IOMEM(0xffc8003c)
+#define MSTPSR1 IOMEM(0xffc80044)
+#define MSTPSR4 IOMEM(0xffc80048)
+#define MSTPSR6 IOMEM(0xffc8004c)
+#define MSTPCR4 IOMEM(0xffc80050)
+#define MSTPCR5 IOMEM(0xffc80054)
+#define MSTPCR6 IOMEM(0xffc80058)
+#define MSTPCR7 IOMEM(0xffc80040)
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
.init_early = tegra20_init_early,
.init_irq = tegra_dt_init_irq,
.handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
+ .timer = &tegra_sys_timer,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
.restart = tegra_assert_system_reset,
.init_early = tegra30_init_early,
.init_irq = tegra_dt_init_irq,
.handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
+ .timer = &tegra_sys_timer,
.init_machine = tegra30_dt_init,
.init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
void __init tegra_paz00_wifikill_init(void);
-extern struct sys_timer tegra_timer;
+extern struct sys_timer tegra_sys_timer;
#endif
static struct clk *tegra_list_clks[] = {
&tegra_apbdma,
&tegra_rtc,
+ &tegra_timer,
&tegra_i2s1,
&tegra_i2s2,
&tegra_spdif_out,
{
struct clk_tegra *c = to_clk_tegra(hw);
unsigned long input_rate = *prate;
- unsigned long output_rate = *prate;
+ u64 output_rate = *prate;
const struct clk_pll_freq_table *sel;
struct clk_pll_freq_table cfg;
int mul;
&tegra_apbdma,
&tegra_rtc,
&tegra_kbc,
+ &tegra_timer,
&tegra_kfuse,
&tegra_fuse,
&tegra_fuse_burn,
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-struct sys_timer tegra_timer = {
+struct sys_timer tegra_sys_timer = {
.init = tegra_init_timer,
};
#include <linux/smc91x.h>
#include <mach/hardware.h>
+#include "../mach-omap2/debug-devices.h"
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
-include include/asm-generic/Kbuild.asm
-header-y += registers.h
header-y += ucontext.h
-header-y += user.h
generic-y += auxvec.h
generic-y += bug.h
/*
* Atomic operations for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
/*
* Memory barrier definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Bit operations for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef __ASM_HEXAGON_BITSPERLONG_H
-#define __ASM_HEXAGON_BITSPERLONG_H
-
-#define __BITS_PER_LONG 32
-
-#include <asm-generic/bitsperlong.h>
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_BYTEORDER_H
-#define _ASM_BYTEORDER_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-#endif
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* _ASM_BYTEORDER_H */
/*
* Cache definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Cache flush operations for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* xchg/cmpxchg operations for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* DMA operations for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* ELF definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Process execution related definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Fixmap support for Hexagon - enough to support highmem features
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Declarations for to Hexagon Virtal Machine.
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* IO definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* IRQ support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* arch/hexagon/include/asm/kgdb.h - Hexagon KGDB Support
*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
+++ /dev/null
-#include <asm-generic/kvm_para.h>
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Memory layout definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* MM context support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Page management definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_PARAM_H
-#define _ASM_PARAM_H
-
-#define EXEC_PAGESIZE 16384
-
-#include <asm-generic/param.h>
-
-#endif
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Page table support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Page table support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Process/processor support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
+++ /dev/null
-/*
- * Ptrace definitions for the Hexagon architecture
- *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_PTRACE_H
-#define _ASM_PTRACE_H
-
-#include <asm/registers.h>
-
-#define instruction_pointer(regs) pt_elr(regs)
-#define user_stack_pointer(regs) ((regs)->r29)
-
-#define profile_pc(regs) instruction_pointer(regs)
-
-/* kprobe-based event tracer support */
-extern int regs_query_register_offset(const char *name);
-extern const char *regs_query_register_name(unsigned int offset);
-
-#endif
+++ /dev/null
-/*
- * Register definitions for the Hexagon architecture
- *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_REGISTERS_H
-#define _ASM_REGISTERS_H
-
-#define SP r29
-
-#ifndef __ASSEMBLY__
-
-/* See kernel/entry.S for further documentation. */
-
-/*
- * Entry code copies the event record out of guest registers into
- * this structure (which is on the stack).
- */
-
-struct hvm_event_record {
- unsigned long vmel; /* Event Linkage (return address) */
- unsigned long vmest; /* Event context - pre-event SSR values */
- unsigned long vmpsp; /* Previous stack pointer */
- unsigned long vmbadva; /* Bad virtual address for addressing events */
-};
-
-struct pt_regs {
- long restart_r0; /* R0 checkpoint for syscall restart */
- long syscall_nr; /* Only used in system calls */
- union {
- struct {
- unsigned long usr;
- unsigned long preds;
- };
- long long int predsusr;
- };
- union {
- struct {
- unsigned long m0;
- unsigned long m1;
- };
- long long int m1m0;
- };
- union {
- struct {
- unsigned long sa1;
- unsigned long lc1;
- };
- long long int lc1sa1;
- };
- union {
- struct {
- unsigned long sa0;
- unsigned long lc0;
- };
- long long int lc0sa0;
- };
- union {
- struct {
- unsigned long gp;
- unsigned long ugp;
- };
- long long int ugpgp;
- };
- /*
- * Be extremely careful with rearranging these, if at all. Some code
- * assumes the 32 registers exist exactly like this in memory;
- * e.g. kernel/ptrace.c
- * e.g. kernel/signal.c (restore_sigcontext)
- */
- union {
- struct {
- unsigned long r00;
- unsigned long r01;
- };
- long long int r0100;
- };
- union {
- struct {
- unsigned long r02;
- unsigned long r03;
- };
- long long int r0302;
- };
- union {
- struct {
- unsigned long r04;
- unsigned long r05;
- };
- long long int r0504;
- };
- union {
- struct {
- unsigned long r06;
- unsigned long r07;
- };
- long long int r0706;
- };
- union {
- struct {
- unsigned long r08;
- unsigned long r09;
- };
- long long int r0908;
- };
- union {
- struct {
- unsigned long r10;
- unsigned long r11;
- };
- long long int r1110;
- };
- union {
- struct {
- unsigned long r12;
- unsigned long r13;
- };
- long long int r1312;
- };
- union {
- struct {
- unsigned long r14;
- unsigned long r15;
- };
- long long int r1514;
- };
- union {
- struct {
- unsigned long r16;
- unsigned long r17;
- };
- long long int r1716;
- };
- union {
- struct {
- unsigned long r18;
- unsigned long r19;
- };
- long long int r1918;
- };
- union {
- struct {
- unsigned long r20;
- unsigned long r21;
- };
- long long int r2120;
- };
- union {
- struct {
- unsigned long r22;
- unsigned long r23;
- };
- long long int r2322;
- };
- union {
- struct {
- unsigned long r24;
- unsigned long r25;
- };
- long long int r2524;
- };
- union {
- struct {
- unsigned long r26;
- unsigned long r27;
- };
- long long int r2726;
- };
- union {
- struct {
- unsigned long r28;
- unsigned long r29;
- };
- long long int r2928;
- };
- union {
- struct {
- unsigned long r30;
- unsigned long r31;
- };
- long long int r3130;
- };
- /* VM dispatch pushes event record onto stack - we can build on it */
- struct hvm_event_record hvmer;
-};
-
-/* Defines to conveniently access the values */
-
-/*
- * As of the VM spec 0.5, these registers are now set/retrieved via a
- * VM call. On the in-bound side, we just fetch the values
- * at the entry points and stuff them into the old record in pt_regs.
- * However, on the outbound side, probably at VM rte, we set the
- * registers back.
- */
-
-#define pt_elr(regs) ((regs)->hvmer.vmel)
-#define pt_set_elr(regs, val) ((regs)->hvmer.vmel = (val))
-#define pt_cause(regs) ((regs)->hvmer.vmest & (HVM_VMEST_CAUSE_MSK))
-#define user_mode(regs) \
- (((regs)->hvmer.vmest & (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT)) != 0)
-#define ints_enabled(regs) \
- (((regs)->hvmer.vmest & (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)) != 0)
-#define pt_psp(regs) ((regs)->hvmer.vmpsp)
-#define pt_badva(regs) ((regs)->hvmer.vmbadva)
-
-#define pt_set_rte_sp(regs, sp) do {\
- pt_psp(regs) = (sp);\
- (regs)->SP = (unsigned long) &((regs)->hvmer);\
- } while (0)
-
-#define pt_set_kmode(regs) \
- (regs)->hvmer.vmest = (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)
-
-#define pt_set_usermode(regs) \
- (regs)->hvmer.vmest = (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT) \
- | (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)
-
-#endif /* ifndef __ASSEMBLY */
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_SETUP_H
-#define _ASM_SETUP_H
-
-#include <linux/init.h>
-#include <asm-generic/setup.h>
-
-extern char external_cmdline_buffer;
-
-void __init setup_arch_memory(void);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_SIGCONTEXT_H
-#define _ASM_SIGCONTEXT_H
-
-#include <asm/user.h>
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked. Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
- struct user_regs_struct sc_regs;
-} __aligned(8);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_SIGNAL_H
-#define _ASM_SIGNAL_H
-
-extern unsigned long __rt_sigtramp_template[2];
-
-#include <asm-generic/signal.h>
-
-#endif
/*
* SMP definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Spinlock support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
/*
* Spinlock support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_SWAB_H
-#define _ASM_SWAB_H
-
-#define __SWAB_64_THRU_32__
-
-#endif
/*
* Task switching definitions for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Syscall support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Thread support for the Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Timer support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* TLB flush support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Trap support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* User memory access support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
+++ /dev/null
-/*
- * Syscall support for Hexagon
- *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-/*
- * The kernel pulls this unistd.h in three different ways:
- * 1. the "normal" way which gets all the __NR defines
- * 2. with __SYSCALL defined to produce function declarations
- * 3. with __SYSCALL defined to produce syscall table initialization
- * See also: syscalltab.c
- */
-
-#define sys_mmap2 sys_mmap_pgoff
-
-#include <asm-generic/unistd.h>
+++ /dev/null
-/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef HEXAGON_ASM_USER_H
-#define HEXAGON_ASM_USER_H
-
-/*
- * Layout for registers passed in elf core dumps to userspace.
- *
- * Basically a rearranged subset of "pt_regs".
- *
- * Interested parties: libc, gdb...
- */
-
-struct user_regs_struct {
- unsigned long r0;
- unsigned long r1;
- unsigned long r2;
- unsigned long r3;
- unsigned long r4;
- unsigned long r5;
- unsigned long r6;
- unsigned long r7;
- unsigned long r8;
- unsigned long r9;
- unsigned long r10;
- unsigned long r11;
- unsigned long r12;
- unsigned long r13;
- unsigned long r14;
- unsigned long r15;
- unsigned long r16;
- unsigned long r17;
- unsigned long r18;
- unsigned long r19;
- unsigned long r20;
- unsigned long r21;
- unsigned long r22;
- unsigned long r23;
- unsigned long r24;
- unsigned long r25;
- unsigned long r26;
- unsigned long r27;
- unsigned long r28;
- unsigned long r29;
- unsigned long r30;
- unsigned long r31;
- unsigned long sa0;
- unsigned long lc0;
- unsigned long sa1;
- unsigned long lc1;
- unsigned long m0;
- unsigned long m1;
- unsigned long usr;
- unsigned long p3_0;
- unsigned long gp;
- unsigned long ugp;
- unsigned long pc;
- unsigned long cause;
- unsigned long badva;
- unsigned long pad1; /* pad out to 48 words total */
- unsigned long pad2; /* pad out to 48 words total */
- unsigned long pad3; /* pad out to 48 words total */
-};
-
-#endif
/*
* vDSO implementation for Hexagon
*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Hexagon VM page table entry definitions
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += kvm_para.h
+header-y += param.h
+header-y += ptrace.h
+header-y += registers.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += signal.h
+header-y += swab.h
+header-y += unistd.h
+header-y += user.h
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_HEXAGON_BITSPERLONG_H
+#define __ASM_HEXAGON_BITSPERLONG_H
+
+#define __BITS_PER_LONG 32
+
+#include <asm-generic/bitsperlong.h>
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+#endif
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
--- /dev/null
+#include <asm-generic/kvm_para.h>
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#define EXEC_PAGESIZE 16384
+
+#include <asm-generic/param.h>
+
+#endif
--- /dev/null
+/*
+ * Ptrace definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <asm/registers.h>
+
+#define instruction_pointer(regs) pt_elr(regs)
+#define user_stack_pointer(regs) ((regs)->r29)
+
+#define profile_pc(regs) instruction_pointer(regs)
+
+/* kprobe-based event tracer support */
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+
+#endif
--- /dev/null
+/*
+ * Register definitions for the Hexagon architecture
+ */
+
+
+#ifndef _ASM_REGISTERS_H
+#define _ASM_REGISTERS_H
+
+#define SP r29
+
+#ifndef __ASSEMBLY__
+
+/* See kernel/entry.S for further documentation. */
+
+/*
+ * Entry code copies the event record out of guest registers into
+ * this structure (which is on the stack).
+ */
+
+struct hvm_event_record {
+ unsigned long vmel; /* Event Linkage (return address) */
+ unsigned long vmest; /* Event context - pre-event SSR values */
+ unsigned long vmpsp; /* Previous stack pointer */
+ unsigned long vmbadva; /* Bad virtual address for addressing events */
+};
+
+struct pt_regs {
+ long restart_r0; /* R0 checkpoint for syscall restart */
+ long syscall_nr; /* Only used in system calls */
+ union {
+ struct {
+ unsigned long usr;
+ unsigned long preds;
+ };
+ long long int predsusr;
+ };
+ union {
+ struct {
+ unsigned long m0;
+ unsigned long m1;
+ };
+ long long int m1m0;
+ };
+ union {
+ struct {
+ unsigned long sa1;
+ unsigned long lc1;
+ };
+ long long int lc1sa1;
+ };
+ union {
+ struct {
+ unsigned long sa0;
+ unsigned long lc0;
+ };
+ long long int lc0sa0;
+ };
+ union {
+ struct {
+ unsigned long gp;
+ unsigned long ugp;
+ };
+ long long int ugpgp;
+ };
+ /*
+ * Be extremely careful with rearranging these, if at all. Some code
+ * assumes the 32 registers exist exactly like this in memory;
+ * e.g. kernel/ptrace.c
+ * e.g. kernel/signal.c (restore_sigcontext)
+ */
+ union {
+ struct {
+ unsigned long r00;
+ unsigned long r01;
+ };
+ long long int r0100;
+ };
+ union {
+ struct {
+ unsigned long r02;
+ unsigned long r03;
+ };
+ long long int r0302;
+ };
+ union {
+ struct {
+ unsigned long r04;
+ unsigned long r05;
+ };
+ long long int r0504;
+ };
+ union {
+ struct {
+ unsigned long r06;
+ unsigned long r07;
+ };
+ long long int r0706;
+ };
+ union {
+ struct {
+ unsigned long r08;
+ unsigned long r09;
+ };
+ long long int r0908;
+ };
+ union {
+ struct {
+ unsigned long r10;
+ unsigned long r11;
+ };
+ long long int r1110;
+ };
+ union {
+ struct {
+ unsigned long r12;
+ unsigned long r13;
+ };
+ long long int r1312;
+ };
+ union {
+ struct {
+ unsigned long r14;
+ unsigned long r15;
+ };
+ long long int r1514;
+ };
+ union {
+ struct {
+ unsigned long r16;
+ unsigned long r17;
+ };
+ long long int r1716;
+ };
+ union {
+ struct {
+ unsigned long r18;
+ unsigned long r19;
+ };
+ long long int r1918;
+ };
+ union {
+ struct {
+ unsigned long r20;
+ unsigned long r21;
+ };
+ long long int r2120;
+ };
+ union {
+ struct {
+ unsigned long r22;
+ unsigned long r23;
+ };
+ long long int r2322;
+ };
+ union {
+ struct {
+ unsigned long r24;
+ unsigned long r25;
+ };
+ long long int r2524;
+ };
+ union {
+ struct {
+ unsigned long r26;
+ unsigned long r27;
+ };
+ long long int r2726;
+ };
+ union {
+ struct {
+ unsigned long r28;
+ unsigned long r29;
+ };
+ long long int r2928;
+ };
+ union {
+ struct {
+ unsigned long r30;
+ unsigned long r31;
+ };
+ long long int r3130;
+ };
+ /* VM dispatch pushes event record onto stack - we can build on it */
+ struct hvm_event_record hvmer;
+};
+
+/* Defines to conveniently access the values */
+
+/*
+ * As of the VM spec 0.5, these registers are now set/retrieved via a
+ * VM call. On the in-bound side, we just fetch the values
+ * at the entry points and stuff them into the old record in pt_regs.
+ * However, on the outbound side, probably at VM rte, we set the
+ * registers back.
+ */
+
+#define pt_elr(regs) ((regs)->hvmer.vmel)
+#define pt_set_elr(regs, val) ((regs)->hvmer.vmel = (val))
+#define pt_cause(regs) ((regs)->hvmer.vmest & (HVM_VMEST_CAUSE_MSK))
+#define user_mode(regs) \
+ (((regs)->hvmer.vmest & (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT)) != 0)
+#define ints_enabled(regs) \
+ (((regs)->hvmer.vmest & (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)) != 0)
+#define pt_psp(regs) ((regs)->hvmer.vmpsp)
+#define pt_badva(regs) ((regs)->hvmer.vmbadva)
+
+#define pt_set_rte_sp(regs, sp) do {\
+ pt_psp(regs) = (sp);\
+ (regs)->SP = (unsigned long) &((regs)->hvmer);\
+ } while (0)
+
+#define pt_set_kmode(regs) \
+ (regs)->hvmer.vmest = (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)
+
+#define pt_set_usermode(regs) \
+ (regs)->hvmer.vmest = (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT) \
+ | (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)
+
+#endif /* ifndef __ASSEMBLY */
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+#include <linux/init.h>
+#include <asm-generic/setup.h>
+
+extern char external_cmdline_buffer;
+
+void __init setup_arch_memory(void);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/user.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked. Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+ struct user_regs_struct sc_regs;
+} __aligned(8);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+extern unsigned long __rt_sigtramp_template[2];
+
+#include <asm-generic/signal.h>
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#define __SWAB_64_THRU_32__
+
+#endif
--- /dev/null
+/*
+ * Syscall support for Hexagon
+ *
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * The kernel pulls this unistd.h in three different ways:
+ * 1. the "normal" way which gets all the __NR defines
+ * 2. with __SYSCALL defined to produce function declarations
+ * 3. with __SYSCALL defined to produce syscall table initialization
+ * See also: syscalltab.c
+ */
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#include <asm-generic/unistd.h>
--- /dev/null
+#ifndef HEXAGON_ASM_USER_H
+#define HEXAGON_ASM_USER_H
+
+/*
+ * Layout for registers passed in elf core dumps to userspace.
+ *
+ * Basically a rearranged subset of "pt_regs".
+ *
+ * Interested parties: libc, gdb...
+ */
+
+struct user_regs_struct {
+ unsigned long r0;
+ unsigned long r1;
+ unsigned long r2;
+ unsigned long r3;
+ unsigned long r4;
+ unsigned long r5;
+ unsigned long r6;
+ unsigned long r7;
+ unsigned long r8;
+ unsigned long r9;
+ unsigned long r10;
+ unsigned long r11;
+ unsigned long r12;
+ unsigned long r13;
+ unsigned long r14;
+ unsigned long r15;
+ unsigned long r16;
+ unsigned long r17;
+ unsigned long r18;
+ unsigned long r19;
+ unsigned long r20;
+ unsigned long r21;
+ unsigned long r22;
+ unsigned long r23;
+ unsigned long r24;
+ unsigned long r25;
+ unsigned long r26;
+ unsigned long r27;
+ unsigned long r28;
+ unsigned long r29;
+ unsigned long r30;
+ unsigned long r31;
+ unsigned long sa0;
+ unsigned long lc0;
+ unsigned long sa1;
+ unsigned long lc1;
+ unsigned long m0;
+ unsigned long m1;
+ unsigned long usr;
+ unsigned long p3_0;
+ unsigned long gp;
+ unsigned long ugp;
+ unsigned long pc;
+ unsigned long cause;
+ unsigned long badva;
+ unsigned long pad1; /* pad out to 48 words total */
+ unsigned long pad2; /* pad out to 48 words total */
+ unsigned long pad3; /* pad out to 48 words total */
+};
+
+#endif
* Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc.
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* DMA implementation for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Early kernel startup code for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
/*
* Export of symbols defined in assembly files and/or libgcc.
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* First-level interrupt controller model for Hexagon.
*
- * Copyright (c) 2010-2011 Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* arch/hexagon/kernel/kgdb.c - Hexagon KGDB Support
*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Kernel module loader for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Process creation support for Hexagon
*
- * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Ptrace support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Arch related setup for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Signal support for Hexagon processor
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* SMP support for Hexagon
*
- * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Stacktrace support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Hexagon system calls
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* System call table for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Time related functions for Hexagon architecture
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* CPU topology for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Kernel traps/events for Hexagon processor
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* vDSO implementation for Hexagon
*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Event entry/exit for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Mostly IRQ support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Initial page table for Linux kernel under Hexagon VM,
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Hexagon VM instruction support
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Context switch support for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Event jump tables
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Linker script for Hexagon kernel
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Checksum functions for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* I/O access functions for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify
/*
- * Copyright (c) 2011 Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Cache management functions for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* User memory copy functions for kernel
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* User memory copying routines for the Hexagon Kernel
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Memory subsystem initialization for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* I/O remap functions for Hexagon
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* User string length functions for kernel
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Memory fault handling for Hexagon
*
- * Copyright (c) 2010-2011 Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
/*
* Hexagon Virtual Machine TLB functions
*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
-include include/asm-generic/Kbuild.asm
-header-y += pdc.h
-generic-y += clkdev.h
-generic-y += word-at-a-time.h
-generic-y += exec.h
+generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \
+ segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \
+ div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \
+ poll.h xor.h clkdev.h exec.h
+++ /dev/null
-#ifndef __ASMPARISC_AUXVEC_H
-#define __ASMPARISC_AUXVEC_H
-
-#endif
+++ /dev/null
-#ifndef __ASM_PARISC_BITSPERLONG_H
-#define __ASM_PARISC_BITSPERLONG_H
-
-/*
- * using CONFIG_* outside of __KERNEL__ is wrong,
- * __LP64__ was also removed from headers, so what
- * is the right approach on parisc?
- * -arnd
- */
-#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__)
-#define __BITS_PER_LONG 64
-#define SHIFT_PER_LONG 6
-#else
-#define __BITS_PER_LONG 32
-#define SHIFT_PER_LONG 5
-#endif
-
-#include <asm-generic/bitsperlong.h>
-
-#endif /* __ASM_PARISC_BITSPERLONG_H */
+++ /dev/null
-#ifndef _PARISC_BYTEORDER_H
-#define _PARISC_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _PARISC_BYTEORDER_H */
+++ /dev/null
-/* Use generic */
-#include <asm-generic/compat_signal.h>
+++ /dev/null
-#ifndef __PARISC_CPUTIME_H
-#define __PARISC_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __PARISC_CPUTIME_H */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef _PARISC_ERRNO_H
-#define _PARISC_ERRNO_H
-
-#include <asm-generic/errno-base.h>
-
-#define ENOMSG 35 /* No message of desired type */
-#define EIDRM 36 /* Identifier removed */
-#define ECHRNG 37 /* Channel number out of range */
-#define EL2NSYNC 38 /* Level 2 not synchronized */
-#define EL3HLT 39 /* Level 3 halted */
-#define EL3RST 40 /* Level 3 reset */
-#define ELNRNG 41 /* Link number out of range */
-#define EUNATCH 42 /* Protocol driver not attached */
-#define ENOCSI 43 /* No CSI structure available */
-#define EL2HLT 44 /* Level 2 halted */
-#define EDEADLK 45 /* Resource deadlock would occur */
-#define EDEADLOCK EDEADLK
-#define ENOLCK 46 /* No record locks available */
-#define EILSEQ 47 /* Illegal byte sequence */
-
-#define ENONET 50 /* Machine is not on the network */
-#define ENODATA 51 /* No data available */
-#define ETIME 52 /* Timer expired */
-#define ENOSR 53 /* Out of streams resources */
-#define ENOSTR 54 /* Device not a stream */
-#define ENOPKG 55 /* Package not installed */
-
-#define ENOLINK 57 /* Link has been severed */
-#define EADV 58 /* Advertise error */
-#define ESRMNT 59 /* Srmount error */
-#define ECOMM 60 /* Communication error on send */
-#define EPROTO 61 /* Protocol error */
-
-#define EMULTIHOP 64 /* Multihop attempted */
-
-#define EDOTDOT 66 /* RFS specific error */
-#define EBADMSG 67 /* Not a data message */
-#define EUSERS 68 /* Too many users */
-#define EDQUOT 69 /* Quota exceeded */
-#define ESTALE 70 /* Stale NFS file handle */
-#define EREMOTE 71 /* Object is remote */
-#define EOVERFLOW 72 /* Value too large for defined data type */
-
-/* these errnos are defined by Linux but not HPUX. */
-
-#define EBADE 160 /* Invalid exchange */
-#define EBADR 161 /* Invalid request descriptor */
-#define EXFULL 162 /* Exchange full */
-#define ENOANO 163 /* No anode */
-#define EBADRQC 164 /* Invalid request code */
-#define EBADSLT 165 /* Invalid slot */
-#define EBFONT 166 /* Bad font file format */
-#define ENOTUNIQ 167 /* Name not unique on network */
-#define EBADFD 168 /* File descriptor in bad state */
-#define EREMCHG 169 /* Remote address changed */
-#define ELIBACC 170 /* Can not access a needed shared library */
-#define ELIBBAD 171 /* Accessing a corrupted shared library */
-#define ELIBSCN 172 /* .lib section in a.out corrupted */
-#define ELIBMAX 173 /* Attempting to link in too many shared libraries */
-#define ELIBEXEC 174 /* Cannot exec a shared library directly */
-#define ERESTART 175 /* Interrupted system call should be restarted */
-#define ESTRPIPE 176 /* Streams pipe error */
-#define EUCLEAN 177 /* Structure needs cleaning */
-#define ENOTNAM 178 /* Not a XENIX named type file */
-#define ENAVAIL 179 /* No XENIX semaphores available */
-#define EISNAM 180 /* Is a named type file */
-#define EREMOTEIO 181 /* Remote I/O error */
-#define ENOMEDIUM 182 /* No medium found */
-#define EMEDIUMTYPE 183 /* Wrong medium type */
-#define ENOKEY 184 /* Required key not available */
-#define EKEYEXPIRED 185 /* Key has expired */
-#define EKEYREVOKED 186 /* Key has been revoked */
-#define EKEYREJECTED 187 /* Key was rejected by service */
-
-/* We now return you to your regularly scheduled HPUX. */
-
-#define ENOSYM 215 /* symbol does not exist in executable */
-#define ENOTSOCK 216 /* Socket operation on non-socket */
-#define EDESTADDRREQ 217 /* Destination address required */
-#define EMSGSIZE 218 /* Message too long */
-#define EPROTOTYPE 219 /* Protocol wrong type for socket */
-#define ENOPROTOOPT 220 /* Protocol not available */
-#define EPROTONOSUPPORT 221 /* Protocol not supported */
-#define ESOCKTNOSUPPORT 222 /* Socket type not supported */
-#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */
-#define EPFNOSUPPORT 224 /* Protocol family not supported */
-#define EAFNOSUPPORT 225 /* Address family not supported by protocol */
-#define EADDRINUSE 226 /* Address already in use */
-#define EADDRNOTAVAIL 227 /* Cannot assign requested address */
-#define ENETDOWN 228 /* Network is down */
-#define ENETUNREACH 229 /* Network is unreachable */
-#define ENETRESET 230 /* Network dropped connection because of reset */
-#define ECONNABORTED 231 /* Software caused connection abort */
-#define ECONNRESET 232 /* Connection reset by peer */
-#define ENOBUFS 233 /* No buffer space available */
-#define EISCONN 234 /* Transport endpoint is already connected */
-#define ENOTCONN 235 /* Transport endpoint is not connected */
-#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */
-#define ETOOMANYREFS 237 /* Too many references: cannot splice */
-#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */
-#define ETIMEDOUT 238 /* Connection timed out */
-#define ECONNREFUSED 239 /* Connection refused */
-#define EREMOTERELEASE 240 /* Remote peer released connection */
-#define EHOSTDOWN 241 /* Host is down */
-#define EHOSTUNREACH 242 /* No route to host */
-
-#define EALREADY 244 /* Operation already in progress */
-#define EINPROGRESS 245 /* Operation now in progress */
-#define EWOULDBLOCK 246 /* Operation would block (Linux returns EAGAIN) */
-#define ENOTEMPTY 247 /* Directory not empty */
-#define ENAMETOOLONG 248 /* File name too long */
-#define ELOOP 249 /* Too many symbolic links encountered */
-#define ENOSYS 251 /* Function not implemented */
-
-#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */
-#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */
-#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */
-
-/* for robust mutexes */
-#define EOWNERDEAD 254 /* Owner died */
-#define ENOTRECOVERABLE 255 /* State not recoverable */
-
-#define ERFKILL 256 /* Operation not possible due to RF-kill */
-
-#define EHWPOISON 257 /* Memory page has hardware error */
-
-#endif
+++ /dev/null
-#ifndef _PARISC_FCNTL_H
-#define _PARISC_FCNTL_H
-
-#define O_APPEND 000000010
-#define O_BLKSEEK 000000100 /* HPUX only */
-#define O_CREAT 000000400 /* not fcntl */
-#define O_EXCL 000002000 /* not fcntl */
-#define O_LARGEFILE 000004000
-#define __O_SYNC 000100000
-#define O_SYNC (__O_SYNC|O_DSYNC)
-#define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */
-#define O_NOCTTY 000400000 /* not fcntl */
-#define O_DSYNC 001000000 /* HPUX only */
-#define O_RSYNC 002000000 /* HPUX only */
-#define O_NOATIME 004000000
-#define O_CLOEXEC 010000000 /* set close_on_exec */
-
-#define O_DIRECTORY 000010000 /* must be a directory */
-#define O_NOFOLLOW 000000200 /* don't follow links */
-#define O_INVISIBLE 004000000 /* invisible I/O, for DMAPI/XDSM */
-
-#define O_PATH 020000000
-
-#define F_GETLK64 8
-#define F_SETLK64 9
-#define F_SETLKW64 10
-
-#define F_GETOWN 11 /* for sockets. */
-#define F_SETOWN 12 /* for sockets. */
-#define F_SETSIG 13 /* for sockets. */
-#define F_GETSIG 14 /* for sockets. */
-
-/* for posix fcntl() and lockf() */
-#define F_RDLCK 01
-#define F_WRLCK 02
-#define F_UNLCK 03
-
-#include <asm-generic/fcntl.h>
-
-#endif
+++ /dev/null
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
-
-/*
- * linux/include/asm/hw_irq.h
- */
-
-#endif
+++ /dev/null
-/*
- * Linux/PA-RISC Project (http://www.parisc-linux.org/)
- * Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org >
- * portions from "linux/ioctl.h for Linux" by H.H. Bergman.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-#ifndef _ASM_PARISC_IOCTL_H
-#define _ASM_PARISC_IOCTL_H
-
-/* ioctl command encoding: 32 bits total, command in lower 16 bits,
- * size of the parameter structure in the lower 14 bits of the
- * upper 16 bits.
- * Encoding the size of the parameter structure in the ioctl request
- * is useful for catching programs compiled with old versions
- * and to avoid overwriting user space outside the user buffer area.
- * The highest 2 bits are reserved for indicating the ``access mode''.
- * NOTE: This limits the max parameter size to 16kB -1 !
- */
-
-/*
- * Direction bits.
- */
-#define _IOC_NONE 0U
-#define _IOC_WRITE 2U
-#define _IOC_READ 1U
-
-#include <asm-generic/ioctl.h>
-
-#endif /* _ASM_PARISC_IOCTL_H */
+++ /dev/null
-#ifndef __ARCH_PARISC_IOCTLS_H__
-#define __ARCH_PARISC_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS _IOR('T', 16, struct termios) /* TCGETATTR */
-#define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */
-#define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */
-#define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */
-#define TCGETA _IOR('T', 1, struct termio)
-#define TCSETA _IOW('T', 2, struct termio)
-#define TCSETAW _IOW('T', 3, struct termio)
-#define TCSETAF _IOW('T', 4, struct termio)
-#define TCSBRK _IO('T', 5)
-#define TCXONC _IO('T', 6)
-#define TCFLSH _IO('T', 7)
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP _IOR('T', 30, int)
-#define TIOCSPGRP _IOW('T', 29, int)
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-#define TIOCVHANGUP 0x5437
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x5460 /* Get exact space used by quota */
-
-#define TIOCSTART 0x5461
-#define TIOCSTOP 0x5462
-#define TIOCSLTC 0x5462
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_PARISC_IOCTLS_H */
+++ /dev/null
-#ifndef __PARISC_IPCBUF_H__
-#define __PARISC_IPCBUF_H__
-
-/*
- * The ipc64_perm structure for PA-RISC is almost identical to
- * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel.
- * 'seq' has been changed from long to int so that it's the same size
- * on 64-bit kernels as on 32-bit ones.
- */
-
-struct ipc64_perm
-{
- key_t key;
- uid_t uid;
- gid_t gid;
- uid_t cuid;
- gid_t cgid;
- unsigned short int __pad1;
- mode_t mode;
- unsigned short int __pad2;
- unsigned short int seq;
- unsigned int __pad3;
- unsigned long long int __unused1;
- unsigned long long int __unused2;
-};
-
-#endif /* __PARISC_IPCBUF_H__ */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#include <asm-generic/kvm_para.h>
+++ /dev/null
-#include <asm-generic/local.h>
+++ /dev/null
-#include <asm-generic/local64.h>
+++ /dev/null
-#ifndef __PARISC_MMAN_H__
-#define __PARISC_MMAN_H__
-
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x03 /* Mask for type of mapping */
-#define MAP_FIXED 0x04 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x10 /* don't use a file */
-
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_GROWSDOWN 0x8000 /* stack-like segment */
-#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x20000 /* do not block on IO */
-#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB 0x80000 /* create a huge page mapping */
-
-#define MS_SYNC 1 /* synchronous memory sync */
-#define MS_ASYNC 2 /* sync memory asynchronously */
-#define MS_INVALIDATE 4 /* invalidate the caches */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#define MADV_NORMAL 0 /* no further special treatment */
-#define MADV_RANDOM 1 /* expect random page references */
-#define MADV_SEQUENTIAL 2 /* expect sequential page references */
-#define MADV_WILLNEED 3 /* will need these pages */
-#define MADV_DONTNEED 4 /* don't need these pages */
-#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */
-#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */
-#define MADV_VPS_INHERIT 7 /* Inherit parents page size */
-
-/* common/generic parameters */
-#define MADV_REMOVE 9 /* remove these pages & resources */
-#define MADV_DONTFORK 10 /* don't inherit across fork */
-#define MADV_DOFORK 11 /* do inherit across fork */
-
-/* The range 12-64 is reserved for page size specification. */
-#define MADV_4K_PAGES 12 /* Use 4K pages */
-#define MADV_16K_PAGES 14 /* Use 16K pages */
-#define MADV_64K_PAGES 16 /* Use 64K pages */
-#define MADV_256K_PAGES 18 /* Use 256K pages */
-#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */
-#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */
-#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */
-#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */
-
-#define MADV_MERGEABLE 65 /* KSM may merge identical pages */
-#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */
-
-#define MADV_HUGEPAGE 67 /* Worth backing with hugepages */
-#define MADV_NOHUGEPAGE 68 /* Not worth backing with hugepages */
-
-#define MADV_DONTDUMP 69 /* Explicity exclude from the core dump,
- overrides the coredump filter bits */
-#define MADV_DODUMP 70 /* Clear the MADV_NODUMP flag */
-
-/* compatibility flags */
-#define MAP_FILE 0
-#define MAP_VARIABLE 0
-
-#endif /* __PARISC_MMAN_H__ */
+++ /dev/null
-#ifndef _PARISC_MSGBUF_H
-#define _PARISC_MSGBUF_H
-
-/*
- * The msqid64_ds structure for parisc architecture, copied from sparc.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
-#ifndef CONFIG_64BIT
- unsigned int __pad1;
-#endif
- __kernel_time_t msg_stime; /* last msgsnd time */
-#ifndef CONFIG_64BIT
- unsigned int __pad2;
-#endif
- __kernel_time_t msg_rtime; /* last msgrcv time */
-#ifndef CONFIG_64BIT
- unsigned int __pad3;
-#endif
- __kernel_time_t msg_ctime; /* last change time */
- unsigned int msg_cbytes; /* current number of bytes on queue */
- unsigned int msg_qnum; /* number of messages in queue */
- unsigned int msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned int __unused1;
- unsigned int __unused2;
-};
-
-#endif /* _PARISC_MSGBUF_H */
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-#include <asm-generic/param.h>
#ifndef _PARISC_PDC_H
#define _PARISC_PDC_H
-/*
- * PDC return values ...
- * All PDC calls return a subset of these errors.
- */
-
-#define PDC_WARN 3 /* Call completed with a warning */
-#define PDC_REQ_ERR_1 2 /* See above */
-#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
-#define PDC_OK 0 /* Call completed successfully */
-#define PDC_BAD_PROC -1 /* Called non-existent procedure*/
-#define PDC_BAD_OPTION -2 /* Called with non-existent option */
-#define PDC_ERROR -3 /* Call could not complete without an error */
-#define PDC_NE_MOD -5 /* Module not found */
-#define PDC_NE_CELL_MOD -7 /* Cell module not found */
-#define PDC_INVALID_ARG -10 /* Called with an invalid argument */
-#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
-#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
-
-/*
- * PDC entry points...
- */
-
-#define PDC_POW_FAIL 1 /* perform a power-fail */
-#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */
-
-#define PDC_CHASSIS 2 /* PDC-chassis functions */
-#define PDC_CHASSIS_DISP 0 /* update chassis display */
-#define PDC_CHASSIS_WARN 1 /* return chassis warnings */
-#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
-#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */
-
-#define PDC_PIM 3 /* Get PIM data */
-#define PDC_PIM_HPMC 0 /* Transfer HPMC data */
-#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
-#define PDC_PIM_LPMC 2 /* Transfer HPMC data */
-#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
-#define PDC_PIM_TOC 4 /* Transfer TOC data */
-
-#define PDC_MODEL 4 /* PDC model information call */
-#define PDC_MODEL_INFO 0 /* returns information */
-#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
-#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
-#define PDC_MODEL_SYSMODEL 3 /* return system model info */
-#define PDC_MODEL_ENSPEC 4 /* enable specific option */
-#define PDC_MODEL_DISPEC 5 /* disable specific option */
-#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
-#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
-/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
-#define PDC_MODEL_OS64 (1 << 0)
-#define PDC_MODEL_OS32 (1 << 1)
-#define PDC_MODEL_IOPDIR_FDC (1 << 2)
-#define PDC_MODEL_NVA_MASK (3 << 4)
-#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
-#define PDC_MODEL_NVA_SLOW (1 << 4)
-#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
-#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
-#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
-
-#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */
-#define PA90_INSTRUCTION_SET 0x8
-
-#define PDC_CACHE 5 /* return/set cache (& TLB) info*/
-#define PDC_CACHE_INFO 0 /* returns information */
-#define PDC_CACHE_SET_COH 1 /* set coherence state */
-#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */
-
-#define PDC_HPA 6 /* return HPA of processor */
-#define PDC_HPA_PROCESSOR 0
-#define PDC_HPA_MODULES 1
-
-#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
-#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */
-
-#define PDC_IODC 8 /* talk to IODC */
-#define PDC_IODC_READ 0 /* read IODC entry point */
-/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
-#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
-/* 1, 2 obsolete - HVERSION dependent*/
-#define PDC_IODC_RI_INIT 3 /* Initialize module */
-#define PDC_IODC_RI_IO 4 /* Module input/output */
-#define PDC_IODC_RI_SPA 5 /* Module input/output */
-#define PDC_IODC_RI_CONFIG 6 /* Module input/output */
-/* 7 obsolete - HVERSION dependent */
-#define PDC_IODC_RI_TEST 8 /* Module input/output */
-#define PDC_IODC_RI_TLB 9 /* Module input/output */
-#define PDC_IODC_NINIT 2 /* non-destructive init */
-#define PDC_IODC_DINIT 3 /* destructive init */
-#define PDC_IODC_MEMERR 4 /* check for memory errors */
-#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
-#define PDC_IODC_BUS_ERROR -4 /* bus error return value */
-#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
-#define PDC_IODC_COUNT -6 /* count is too small */
-
-#define PDC_TOD 9 /* time-of-day clock (TOD) */
-#define PDC_TOD_READ 0 /* read TOD */
-#define PDC_TOD_WRITE 1 /* write TOD */
-
-
-#define PDC_STABLE 10 /* stable storage (sprockets) */
-#define PDC_STABLE_READ 0
-#define PDC_STABLE_WRITE 1
-#define PDC_STABLE_RETURN_SIZE 2
-#define PDC_STABLE_VERIFY_CONTENTS 3
-#define PDC_STABLE_INITIALIZE 4
-
-#define PDC_NVOLATILE 11 /* often not implemented */
-
-#define PDC_ADD_VALID 12 /* Memory validation PDC call */
-#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */
-
-#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */
-
-#define PDC_PROC 16 /* (sprockets) */
-
-#define PDC_CONFIG 16 /* (sprockets) */
-#define PDC_CONFIG_DECONFIG 0
-#define PDC_CONFIG_DRECONFIG 1
-#define PDC_CONFIG_DRETURN_CONFIG 2
-
-#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
-#define PDC_BTLB_INFO 0 /* returns parameter */
-#define PDC_BTLB_INSERT 1 /* insert BTLB entry */
-#define PDC_BTLB_PURGE 2 /* purge BTLB entries */
-#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */
-
-#define PDC_TLB 19 /* manage hardware TLB miss handling */
-#define PDC_TLB_INFO 0 /* returns parameter */
-#define PDC_TLB_SETUP 1 /* set up miss handling */
-
-#define PDC_MEM 20 /* Manage memory */
-#define PDC_MEM_MEMINFO 0
-#define PDC_MEM_ADD_PAGE 1
-#define PDC_MEM_CLEAR_PDT 2
-#define PDC_MEM_READ_PDT 3
-#define PDC_MEM_RESET_CLEAR 4
-#define PDC_MEM_GOODMEM 5
-#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
-#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
-#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
-#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
-#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
-
-#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
-#define PDC_MEM_RET_DUPLICATE_ENTRY 4
-#define PDC_MEM_RET_BUF_SIZE_SMALL 1
-#define PDC_MEM_RET_PDT_FULL -11
-#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
-
-#define PDC_PSW 21 /* Get/Set default System Mask */
-#define PDC_PSW_MASK 0 /* Return mask */
-#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
-#define PDC_PSW_SET_DEFAULTS 2 /* Set default */
-#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
-#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */
-
-#define PDC_SYSTEM_MAP 22 /* find system modules */
-#define PDC_FIND_MODULE 0
-#define PDC_FIND_ADDRESS 1
-#define PDC_TRANSLATE_PATH 2
-
-#define PDC_SOFT_POWER 23 /* soft power switch */
-#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
-#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */
-
-
-/* HVERSION dependent */
-
-/* The PDC_MEM_MAP calls */
-#define PDC_MEM_MAP 128 /* on s700: return page info */
-#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */
-
-#define PDC_EEPROM 129 /* EEPROM access */
-#define PDC_EEPROM_READ_WORD 0
-#define PDC_EEPROM_WRITE_WORD 1
-#define PDC_EEPROM_READ_BYTE 2
-#define PDC_EEPROM_WRITE_BYTE 3
-#define PDC_EEPROM_EEPROM_PASSWORD -1000
-
-#define PDC_NVM 130 /* NVM (non-volatile memory) access */
-#define PDC_NVM_READ_WORD 0
-#define PDC_NVM_WRITE_WORD 1
-#define PDC_NVM_READ_BYTE 2
-#define PDC_NVM_WRITE_BYTE 3
-
-#define PDC_SEED_ERROR 132 /* (sprockets) */
-
-#define PDC_IO 135 /* log error info, reset IO system */
-#define PDC_IO_READ_AND_CLEAR_ERRORS 0
-#define PDC_IO_RESET 1
-#define PDC_IO_RESET_DEVICES 2
-/* sets bits 6&7 (little endian) of the HcControl Register */
-#define PDC_IO_USB_SUSPEND 0xC000000000000000
-#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
-#define PDC_IO_NO_SUSPEND -6 /* return value */
-
-#define PDC_BROADCAST_RESET 136 /* reset all processors */
-#define PDC_DO_RESET 0 /* option: perform a broadcast reset */
-#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
-#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
-#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */
-
-#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
-#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */
-
-#define PDC_LAN_STATION_ID_SIZE 6
-
-#define PDC_CHECK_RANGES 139 /* (sprockets) */
-
-#define PDC_NV_SECTIONS 141 /* (sprockets) */
-
-#define PDC_PERFORMANCE 142 /* performance monitoring */
-
-#define PDC_SYSTEM_INFO 143 /* system information */
-#define PDC_SYSINFO_RETURN_INFO_SIZE 0
-#define PDC_SYSINFO_RRETURN_SYS_INFO 1
-#define PDC_SYSINFO_RRETURN_ERRORS 2
-#define PDC_SYSINFO_RRETURN_WARNINGS 3
-#define PDC_SYSINFO_RETURN_REVISIONS 4
-#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
-#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
-
-#define PDC_RDR 144 /* (sprockets) */
-#define PDC_RDR_READ_BUFFER 0
-#define PDC_RDR_READ_SINGLE 1
-#define PDC_RDR_WRITE_SINGLE 2
-
-#define PDC_INTRIGUE 145 /* (sprockets) */
-#define PDC_INTRIGUE_WRITE_BUFFER 0
-#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
-#define PDC_INTRIGUE_START_CPU_COUNTERS 2
-#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
-
-#define PDC_STI 146 /* STI access */
-/* same as PDC_PCI_XXX values (see below) */
-
-/* Legacy PDC definitions for same stuff */
-#define PDC_PCI_INDEX 147
-#define PDC_PCI_INTERFACE_INFO 0
-#define PDC_PCI_SLOT_INFO 1
-#define PDC_PCI_INFLIGHT_BYTES 2
-#define PDC_PCI_READ_CONFIG 3
-#define PDC_PCI_WRITE_CONFIG 4
-#define PDC_PCI_READ_PCI_IO 5
-#define PDC_PCI_WRITE_PCI_IO 6
-#define PDC_PCI_READ_CONFIG_DELAY 7
-#define PDC_PCI_UPDATE_CONFIG_DELAY 8
-#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
-#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
-#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
-#define PDC_PCI_PCI_RESERVED 12
-#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
-#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
-#define PDC_PCI_PCI_INT_ROUTE 14
-#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
-#define PDC_PCI_READ_MON_TYPE 15
-#define PDC_PCI_WRITE_MON_TYPE 16
-
-
-/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
-#define PDC_INITIATOR 163
-#define PDC_GET_INITIATOR 0
-#define PDC_SET_INITIATOR 1
-#define PDC_DELETE_INITIATOR 2
-#define PDC_RETURN_TABLE_SIZE 3
-#define PDC_RETURN_TABLE 4
-
-#define PDC_LINK 165 /* (sprockets) */
-#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
-#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
-
-/* cl_class
- * page 3-33 of IO-Firmware ARS
- * IODC ENTRY_INIT(Search first) RET[1]
- */
-#define CL_NULL 0 /* invalid */
-#define CL_RANDOM 1 /* random access (as disk) */
-#define CL_SEQU 2 /* sequential access (as tape) */
-#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
-#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
-#define CL_DISPL 9 /* half-duplex console (display) */
-#define CL_FC 10 /* FiberChannel access media */
-
-/* IODC ENTRY_INIT() */
-#define ENTRY_INIT_SRCH_FRST 2
-#define ENTRY_INIT_SRCH_NEXT 3
-#define ENTRY_INIT_MOD_DEV 4
-#define ENTRY_INIT_DEV 5
-#define ENTRY_INIT_MOD 6
-#define ENTRY_INIT_MSG 9
-
-/* IODC ENTRY_IO() */
-#define ENTRY_IO_BOOTIN 0
-#define ENTRY_IO_BOOTOUT 1
-#define ENTRY_IO_CIN 2
-#define ENTRY_IO_COUT 3
-#define ENTRY_IO_CLOSE 4
-#define ENTRY_IO_GETMSG 9
-#define ENTRY_IO_BBLOCK_IN 16
-#define ENTRY_IO_BBLOCK_OUT 17
-
-/* IODC ENTRY_SPA() */
-
-/* IODC ENTRY_CONFIG() */
-
-/* IODC ENTRY_TEST() */
-
-/* IODC ENTRY_TLB() */
-
-/* constants for OS (NVM...) */
-#define OS_ID_NONE 0 /* Undefined OS ID */
-#define OS_ID_HPUX 1 /* HP-UX OS */
-#define OS_ID_MPEXL 2 /* MPE XL OS */
-#define OS_ID_OSF 3 /* OSF OS */
-#define OS_ID_HPRT 4 /* HP-RT OS */
-#define OS_ID_NOVEL 5 /* NOVELL OS */
-#define OS_ID_LINUX 6 /* Linux */
-
-
-/* constants for PDC_CHASSIS */
-#define OSTAT_OFF 0
-#define OSTAT_FLT 1
-#define OSTAT_TEST 2
-#define OSTAT_INIT 3
-#define OSTAT_SHUT 4
-#define OSTAT_WARN 5
-#define OSTAT_RUN 6
-#define OSTAT_ON 7
-
-/* Page Zero constant offsets used by the HPMC handler */
-#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
-#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
-#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
-
-/* size of the pdc_result buffer for firmware.c */
-#define NUM_PDC_RESULT 32
+#include <uapi/asm/pdc.h>
#if !defined(__ASSEMBLY__)
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-
extern int pdc_type;
/* Values for pdc_type */
}
}
-#endif /* __KERNEL__ */
-
-/* flags of the device_path */
-#define PF_AUTOBOOT 0x80
-#define PF_AUTOSEARCH 0x40
-#define PF_TIMER 0x0F
-
-struct device_path { /* page 1-69 */
- unsigned char flags; /* flags see above! */
- unsigned char bc[6]; /* bus converter routing info */
- unsigned char mod;
- unsigned int layers[6];/* device-specific layer-info */
-} __attribute__((aligned(8))) ;
-
-struct pz_device {
- struct device_path dp; /* see above */
- /* struct iomod *hpa; */
- unsigned int hpa; /* HPA base address */
- /* char *spa; */
- unsigned int spa; /* SPA base address */
- /* int (*iodc_io)(struct iomod*, ...); */
- unsigned int iodc_io; /* device entry point */
- short pad; /* reserved */
- unsigned short cl_class;/* see below */
-} __attribute__((aligned(8))) ;
-
-struct zeropage {
- /* [0x000] initialize vectors (VEC) */
- unsigned int vec_special; /* must be zero */
- /* int (*vec_pow_fail)(void);*/
- unsigned int vec_pow_fail; /* power failure handler */
- /* int (*vec_toc)(void); */
- unsigned int vec_toc;
- unsigned int vec_toclen;
- /* int (*vec_rendz)(void); */
- unsigned int vec_rendz;
- int vec_pow_fail_flen;
- int vec_pad[10];
-
- /* [0x040] reserved processor dependent */
- int pad0[112];
-
- /* [0x200] reserved */
- int pad1[84];
-
- /* [0x350] memory configuration (MC) */
- int memc_cont; /* contiguous mem size (bytes) */
- int memc_phsize; /* physical memory size */
- int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
- unsigned int mem_pdc_hi; /* used for 64-bit */
-
- /* [0x360] various parameters for the boot-CPU */
- /* unsigned int *mem_booterr[8]; */
- unsigned int mem_booterr[8]; /* ptr to boot errors */
- unsigned int mem_free; /* first location, where OS can be loaded */
- /* struct iomod *mem_hpa; */
- unsigned int mem_hpa; /* HPA of the boot-CPU */
- /* int (*mem_pdc)(int, ...); */
- unsigned int mem_pdc; /* PDC entry point */
- unsigned int mem_10msec; /* number of clock ticks in 10msec */
-
- /* [0x390] initial memory module (IMM) */
- /* struct iomod *imm_hpa; */
- unsigned int imm_hpa; /* HPA of the IMM */
- int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
- unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
- unsigned int imm_max_mem; /* bytes of mem in IMM */
-
- /* [0x3A0] boot console, display device and keyboard */
- struct pz_device mem_cons; /* description of console device */
- struct pz_device mem_boot; /* description of boot device */
- struct pz_device mem_kbd; /* description of keyboard device */
-
- /* [0x430] reserved */
- int pad430[116];
-
- /* [0x600] processor dependent */
- __u32 pad600[1];
- __u32 proc_sti; /* pointer to STI ROM */
- __u32 pad608[126];
-};
-
#endif /* !defined(__ASSEMBLY__) */
-
#endif /* _PARISC_PDC_H */
+++ /dev/null
-#ifndef _PARISC_PERCPU_H
-#define _PARISC_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif
-
+++ /dev/null
-#include <asm-generic/poll.h>
+++ /dev/null
-#ifndef __ARCH_PARISC_POSIX_TYPES_H
-#define __ARCH_PARISC_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef int __kernel_suseconds_t;
-#define __kernel_suseconds_t __kernel_suseconds_t
-
-typedef long long __kernel_off64_t;
-typedef unsigned long long __kernel_ino64_t;
-
-#include <asm-generic/posix_types.h>
-
-#endif
-#ifndef _PARISC_PTRACE_H
-#define _PARISC_PTRACE_H
-
/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg
** Copyright (C) 2000 Grant Grundler, Hewlett-Packard
*/
+#ifndef _PARISC_PTRACE_H
+#define _PARISC_PTRACE_H
-#include <linux/types.h>
-
-/* This struct defines the way the registers are stored on the
- * stack during a system call.
- *
- * N.B. gdb/strace care about the size and offsets within this
- * structure. If you change things, you may break object compatibility
- * for those applications.
- */
-
-struct pt_regs {
- unsigned long gr[32]; /* PSW is in gr[0] */
- __u64 fr[32];
- unsigned long sr[ 8];
- unsigned long iasq[2];
- unsigned long iaoq[2];
- unsigned long cr27;
- unsigned long pad0; /* available for other uses */
- unsigned long orig_r28;
- unsigned long ksp;
- unsigned long kpc;
- unsigned long sar; /* CR11 */
- unsigned long iir; /* CR19 */
- unsigned long isr; /* CR20 */
- unsigned long ior; /* CR21 */
- unsigned long ipsw; /* CR22 */
-};
-
-/*
- * The numbers chosen here are somewhat arbitrary but absolutely MUST
- * not overlap with any of the number assigned in <linux/ptrace.h>.
- *
- * These ones are taken from IA-64 on the assumption that theirs are
- * the most correct (and we also want to support PTRACE_SINGLEBLOCK
- * since we have taken branch traps too)
- */
-#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */
+#include <uapi/asm/ptrace.h>
-#ifdef __KERNEL__
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
unsigned long profile_pc(struct pt_regs *);
-#endif /* __KERNEL__ */
-
#endif
+++ /dev/null
-#ifndef _PARISC_REAL_H
-#define _PARISC_REAL_H
-
-
-#endif
+++ /dev/null
-#ifndef _ASM_PARISC_RESOURCE_H
-#define _ASM_PARISC_RESOURCE_H
-
-#define _STK_LIM_MAX 10 * _STK_LIM
-#include <asm-generic/resource.h>
-
-#endif
+++ /dev/null
-#ifndef __PARISC_SEGMENT_H
-#define __PARISC_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif
+++ /dev/null
-#ifndef _PARISC_SEMBUF_H
-#define _PARISC_SEMBUF_H
-
-/*
- * The semid64_ds structure for parisc architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-#ifndef CONFIG_64BIT
- unsigned int __pad1;
-#endif
- __kernel_time_t sem_otime; /* last semop time */
-#ifndef CONFIG_64BIT
- unsigned int __pad2;
-#endif
- __kernel_time_t sem_ctime; /* last change time */
- unsigned int sem_nsems; /* no. of semaphores in array */
- unsigned int __unused1;
- unsigned int __unused2;
-};
-
-#endif /* _PARISC_SEMBUF_H */
+++ /dev/null
-#ifndef _PARISC_SETUP_H
-#define _PARISC_SETUP_H
-
-#define COMMAND_LINE_SIZE 1024
-
-#endif /* _PARISC_SETUP_H */
+++ /dev/null
-#ifndef _PARISC_SHMBUF_H
-#define _PARISC_SHMBUF_H
-
-/*
- * The shmid64_ds structure for parisc architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
-#ifndef CONFIG_64BIT
- unsigned int __pad1;
-#endif
- __kernel_time_t shm_atime; /* last attach time */
-#ifndef CONFIG_64BIT
- unsigned int __pad2;
-#endif
- __kernel_time_t shm_dtime; /* last detach time */
-#ifndef CONFIG_64BIT
- unsigned int __pad3;
-#endif
- __kernel_time_t shm_ctime; /* last change time */
-#ifndef CONFIG_64BIT
- unsigned int __pad4;
-#endif
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned int shm_nattch; /* no. of current attaches */
- unsigned int __unused1;
- unsigned int __unused2;
-};
-
-#ifdef CONFIG_64BIT
-/* The 'unsigned int' (formerly 'unsigned long') data types below will
- * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on
- * a wide kernel, but if some of these values are meant to contain pointers
- * they may need to be 'long long' instead. -PB XXX FIXME
- */
-#endif
-struct shminfo64 {
- unsigned int shmmax;
- unsigned int shmmin;
- unsigned int shmmni;
- unsigned int shmseg;
- unsigned int shmall;
- unsigned int __unused1;
- unsigned int __unused2;
- unsigned int __unused3;
- unsigned int __unused4;
-};
-
-#endif /* _PARISC_SHMBUF_H */
+++ /dev/null
-#ifndef _ASMPARISC_SIGCONTEXT_H
-#define _ASMPARISC_SIGCONTEXT_H
-
-#define PARISC_SC_FLAG_ONSTACK 1<<0
-#define PARISC_SC_FLAG_IN_SYSCALL 1<<1
-
-/* We will add more stuff here as it becomes necessary, until we know
- it works. */
-struct sigcontext {
- unsigned long sc_flags;
-
- unsigned long sc_gr[32]; /* PSW in sc_gr[0] */
- unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */
- unsigned long sc_iasq[2];
- unsigned long sc_iaoq[2];
- unsigned long sc_sar; /* cr11 */
-};
-
-
-#endif
+++ /dev/null
-#ifndef _PARISC_SIGINFO_H
-#define _PARISC_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#undef NSIGTRAP
-#define NSIGTRAP 4
-
-#endif
#ifndef _ASM_PARISC_SIGNAL_H
#define _ASM_PARISC_SIGNAL_H
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGEMT 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGBUS 10
-#define SIGSEGV 11
-#define SIGSYS 12 /* Linux doesn't use this */
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGUSR1 16
-#define SIGUSR2 17
-#define SIGCHLD 18
-#define SIGPWR 19
-#define SIGVTALRM 20
-#define SIGPROF 21
-#define SIGIO 22
-#define SIGPOLL SIGIO
-#define SIGWINCH 23
-#define SIGSTOP 24
-#define SIGTSTP 25
-#define SIGCONT 26
-#define SIGTTIN 27
-#define SIGTTOU 28
-#define SIGURG 29
-#define SIGLOST 30 /* Linux doesn't use this either */
-#define SIGUNUSED 31
-#define SIGRESERVE SIGUNUSED
+#include <uapi/asm/signal.h>
-#define SIGXCPU 33
-#define SIGXFSZ 34
-#define SIGSTKFLT 36
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 37
-#define SIGRTMAX _NSIG /* it's 44 under HP/UX */
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_ONSTACK 0x00000001
-#define SA_RESETHAND 0x00000004
-#define SA_NOCLDSTOP 0x00000008
-#define SA_SIGINFO 0x00000010
-#define SA_NODEFER 0x00000020
-#define SA_RESTART 0x00000040
-#define SA_NOCLDWAIT 0x00000080
-#define _SA_SIGGFAULT 0x00000100 /* HPUX */
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000 /* obsolete -- ignored */
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#ifdef __KERNEL__
#define _NSIG 64
/* bits-per-word, where word apparently means 'long' not 'int' */
#define _NSIG_BPW BITS_PER_LONG
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-#endif /* __KERNEL__ */
-
-#define SIG_BLOCK 0 /* for blocking signals */
-#define SIG_UNBLOCK 1 /* for unblocking signals */
-#define SIG_SETMASK 2 /* for setting the signal mask */
-
-#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
-#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
-#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
-
# ifndef __ASSEMBLY__
-
-# include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-/* Type of a signal handler. */
#ifdef CONFIG_64BIT
-/* function pointers on 64-bit parisc are pointers to little structs and the
- * compiler doesn't support code which changes or tests the address of
- * the function in the little struct. This is really ugly -PB
- */
-typedef char __user *__sighandler_t;
#else
-typedef void __signalfn_t(int);
-typedef __signalfn_t __user *__sighandler_t;
#endif
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
#include <asm/sigcontext.h>
-#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY */
#endif /* _ASM_PARISC_SIGNAL_H */
+++ /dev/null
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 0xffff
-
-#define SO_DEBUG 0x0001
-#define SO_REUSEADDR 0x0004
-#define SO_KEEPALIVE 0x0008
-#define SO_DONTROUTE 0x0010
-#define SO_BROADCAST 0x0020
-#define SO_LINGER 0x0080
-#define SO_OOBINLINE 0x0100
-/* To add :#define SO_REUSEPORT 0x0200 */
-#define SO_SNDBUF 0x1001
-#define SO_RCVBUF 0x1002
-#define SO_SNDBUFFORCE 0x100a
-#define SO_RCVBUFFORCE 0x100b
-#define SO_SNDLOWAT 0x1003
-#define SO_RCVLOWAT 0x1004
-#define SO_SNDTIMEO 0x1005
-#define SO_RCVTIMEO 0x1006
-#define SO_ERROR 0x1007
-#define SO_TYPE 0x1008
-#define SO_PROTOCOL 0x1028
-#define SO_DOMAIN 0x1029
-#define SO_PEERNAME 0x2000
-
-#define SO_NO_CHECK 0x400b
-#define SO_PRIORITY 0x400c
-#define SO_BSDCOMPAT 0x400e
-#define SO_PASSCRED 0x4010
-#define SO_PEERCRED 0x4011
-#define SO_TIMESTAMP 0x4012
-#define SCM_TIMESTAMP SO_TIMESTAMP
-#define SO_TIMESTAMPNS 0x4013
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 0x4016
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x4017
-#define SO_SECURITY_ENCRYPTION_NETWORK 0x4018
-
-#define SO_BINDTODEVICE 0x4019
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 0x401a
-#define SO_DETACH_FILTER 0x401b
-
-#define SO_ACCEPTCONN 0x401c
-
-#define SO_PEERSEC 0x401d
-#define SO_PASSSEC 0x401e
-
-#define SO_MARK 0x401f
-
-#define SO_TIMESTAMPING 0x4020
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#define SO_RXQ_OVFL 0x4021
-
-#define SO_WIFI_STATUS 0x4022
-#define SCM_WIFI_STATUS SO_WIFI_STATUS
-#define SO_PEEK_OFF 0x4023
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS 0x4024
-
-
-/* O_NONBLOCK clashes with the bits used for socket types. Therefore we
- * have to define SOCK_NONBLOCK to a different value here.
- */
-#define SOCK_NONBLOCK 0x40000000
-
-#endif /* _ASM_SOCKET_H */
+++ /dev/null
-#ifndef __ARCH_PARISC_SOCKIOS__
-#define __ARCH_PARISC_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif
+++ /dev/null
-#ifndef _PARISC_STAT_H
-#define _PARISC_STAT_H
-
-#include <linux/types.h>
-
-struct stat {
- unsigned int st_dev; /* dev_t is 32 bits on parisc */
- ino_t st_ino; /* 32 bits */
- mode_t st_mode; /* 16 bits */
- unsigned short st_nlink; /* 16 bits */
- unsigned short st_reserved1; /* old st_uid */
- unsigned short st_reserved2; /* old st_gid */
- unsigned int st_rdev;
- off_t st_size;
- time_t st_atime;
- unsigned int st_atime_nsec;
- time_t st_mtime;
- unsigned int st_mtime_nsec;
- time_t st_ctime;
- unsigned int st_ctime_nsec;
- int st_blksize;
- int st_blocks;
- unsigned int __unused1; /* ACL stuff */
- unsigned int __unused2; /* network */
- ino_t __unused3; /* network */
- unsigned int __unused4; /* cnodes */
- unsigned short __unused5; /* netsite */
- short st_fstype;
- unsigned int st_realdev;
- unsigned short st_basemode;
- unsigned short st_spareshort;
- uid_t st_uid;
- gid_t st_gid;
- unsigned int st_spare4[3];
-};
-
-#define STAT_HAVE_NSEC
-
-typedef __kernel_off64_t off64_t;
-
-struct hpux_stat64 {
- unsigned int st_dev; /* dev_t is 32 bits on parisc */
- ino_t st_ino; /* 32 bits */
- mode_t st_mode; /* 16 bits */
- unsigned short st_nlink; /* 16 bits */
- unsigned short st_reserved1; /* old st_uid */
- unsigned short st_reserved2; /* old st_gid */
- unsigned int st_rdev;
- off64_t st_size;
- time_t st_atime;
- unsigned int st_spare1;
- time_t st_mtime;
- unsigned int st_spare2;
- time_t st_ctime;
- unsigned int st_spare3;
- int st_blksize;
- __u64 st_blocks;
- unsigned int __unused1; /* ACL stuff */
- unsigned int __unused2; /* network */
- ino_t __unused3; /* network */
- unsigned int __unused4; /* cnodes */
- unsigned short __unused5; /* netsite */
- short st_fstype;
- unsigned int st_realdev;
- unsigned short st_basemode;
- unsigned short st_spareshort;
- uid_t st_uid;
- gid_t st_gid;
- unsigned int st_spare4[3];
-};
-
-/* This is the struct that 32-bit userspace applications are expecting.
- * How 64-bit apps are going to be compiled, I have no idea. But at least
- * this way, we don't have a wrapper in the kernel.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned int __pad1;
-
- unsigned int __st_ino; /* Not actually filled in */
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned long long st_rdev;
- unsigned int __pad2;
- signed long long st_size;
- signed int st_blksize;
-
- signed long long st_blocks;
- signed int st_atime;
- unsigned int st_atime_nsec;
- signed int st_mtime;
- unsigned int st_mtime_nsec;
- signed int st_ctime;
- unsigned int st_ctime_nsec;
- unsigned long long st_ino;
-};
-
-#endif
+++ /dev/null
-#ifndef _PARISC_STATFS_H
-#define _PARISC_STATFS_H
-
-#define __statfs_word long
-#include <asm-generic/statfs.h>
-
-#endif
+++ /dev/null
-#ifndef _PARISC_SWAB_H
-#define _PARISC_SWAB_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
-{
- __asm__("dep %0, 15, 8, %0\n\t" /* deposit 00ab -> 0bab */
- "shd %%r0, %0, 8, %0" /* shift 000000ab -> 00ba */
- : "=r" (x)
- : "0" (x));
- return x;
-}
-#define __arch_swab16 __arch_swab16
-
-static inline __attribute_const__ __u32 __arch_swab24(__u32 x)
-{
- __asm__("shd %0, %0, 8, %0\n\t" /* shift xabcxabc -> cxab */
- "dep %0, 15, 8, %0\n\t" /* deposit cxab -> cbab */
- "shd %%r0, %0, 8, %0" /* shift 0000cbab -> 0cba */
- : "=r" (x)
- : "0" (x));
- return x;
-}
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
- unsigned int temp;
- __asm__("shd %0, %0, 16, %1\n\t" /* shift abcdabcd -> cdab */
- "dep %1, 15, 8, %1\n\t" /* deposit cdab -> cbab */
- "shd %0, %1, 8, %0" /* shift abcdcbab -> dcba */
- : "=r" (x), "=&r" (temp)
- : "0" (x));
- return x;
-}
-#define __arch_swab32 __arch_swab32
-
-#if BITS_PER_LONG > 32
-/*
-** From "PA-RISC 2.0 Architecture", HP Professional Books.
-** See Appendix I page 8 , "Endian Byte Swapping".
-**
-** Pretty cool algorithm: (* == zero'd bits)
-** PERMH 01234567 -> 67452301 into %0
-** HSHL 67452301 -> 7*5*3*1* into %1
-** HSHR 67452301 -> *6*4*2*0 into %0
-** OR %0 | %1 -> 76543210 into %0 (all done!)
-*/
-static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
-{
- __u64 temp;
- __asm__("permh,3210 %0, %0\n\t"
- "hshl %0, 8, %1\n\t"
- "hshr,u %0, 8, %0\n\t"
- "or %1, %0, %0"
- : "=r" (x), "=&r" (temp)
- : "0" (x));
- return x;
-}
-#define __arch_swab64 __arch_swab64
-#endif /* BITS_PER_LONG > 32 */
-
-#endif /* _PARISC_SWAB_H */
+++ /dev/null
-#ifndef __ARCH_PARISC_TERMBITS_H__
-#define __ARCH_PARISC_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0040000
-#define IUTF8 0100000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-#define EXTPROC 0200000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif
#ifndef _PARISC_TERMIOS_H
#define _PARISC_TERMIOS_H
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/termios.h>
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
/* intr=^C quit=^\ erase=del kill=^U
eof=^D vtime=\0 vmin=\1 sxtc=\0
#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-#endif /* __KERNEL__ */
-
#endif /* _PARISC_TERMIOS_H */
+++ /dev/null
-#ifndef _ASM_PARISC_TOPOLOGY_H
-#define _ASM_PARISC_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_PARISC_TOPOLOGY_H */
+++ /dev/null
-#ifndef _PARISC_TYPES_H
-#define _PARISC_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#endif
#ifndef _ASM_PARISC_UNISTD_H_
#define _ASM_PARISC_UNISTD_H_
-/*
- * This file contains the system call numbers.
- */
-
-/*
- * HP-UX system calls get their native numbers for binary compatibility.
- */
-
-#define __NR_HPUX_exit 1
-#define __NR_HPUX_fork 2
-#define __NR_HPUX_read 3
-#define __NR_HPUX_write 4
-#define __NR_HPUX_open 5
-#define __NR_HPUX_close 6
-#define __NR_HPUX_wait 7
-#define __NR_HPUX_creat 8
-#define __NR_HPUX_link 9
-#define __NR_HPUX_unlink 10
-#define __NR_HPUX_execv 11
-#define __NR_HPUX_chdir 12
-#define __NR_HPUX_time 13
-#define __NR_HPUX_mknod 14
-#define __NR_HPUX_chmod 15
-#define __NR_HPUX_chown 16
-#define __NR_HPUX_break 17
-#define __NR_HPUX_lchmod 18
-#define __NR_HPUX_lseek 19
-#define __NR_HPUX_getpid 20
-#define __NR_HPUX_mount 21
-#define __NR_HPUX_umount 22
-#define __NR_HPUX_setuid 23
-#define __NR_HPUX_getuid 24
-#define __NR_HPUX_stime 25
-#define __NR_HPUX_ptrace 26
-#define __NR_HPUX_alarm 27
-#define __NR_HPUX_oldfstat 28
-#define __NR_HPUX_pause 29
-#define __NR_HPUX_utime 30
-#define __NR_HPUX_stty 31
-#define __NR_HPUX_gtty 32
-#define __NR_HPUX_access 33
-#define __NR_HPUX_nice 34
-#define __NR_HPUX_ftime 35
-#define __NR_HPUX_sync 36
-#define __NR_HPUX_kill 37
-#define __NR_HPUX_stat 38
-#define __NR_HPUX_setpgrp3 39
-#define __NR_HPUX_lstat 40
-#define __NR_HPUX_dup 41
-#define __NR_HPUX_pipe 42
-#define __NR_HPUX_times 43
-#define __NR_HPUX_profil 44
-#define __NR_HPUX_ki_call 45
-#define __NR_HPUX_setgid 46
-#define __NR_HPUX_getgid 47
-#define __NR_HPUX_sigsys 48
-#define __NR_HPUX_reserved1 49
-#define __NR_HPUX_reserved2 50
-#define __NR_HPUX_acct 51
-#define __NR_HPUX_set_userthreadid 52
-#define __NR_HPUX_oldlock 53
-#define __NR_HPUX_ioctl 54
-#define __NR_HPUX_reboot 55
-#define __NR_HPUX_symlink 56
-#define __NR_HPUX_utssys 57
-#define __NR_HPUX_readlink 58
-#define __NR_HPUX_execve 59
-#define __NR_HPUX_umask 60
-#define __NR_HPUX_chroot 61
-#define __NR_HPUX_fcntl 62
-#define __NR_HPUX_ulimit 63
-#define __NR_HPUX_getpagesize 64
-#define __NR_HPUX_mremap 65
-#define __NR_HPUX_vfork 66
-#define __NR_HPUX_vread 67
-#define __NR_HPUX_vwrite 68
-#define __NR_HPUX_sbrk 69
-#define __NR_HPUX_sstk 70
-#define __NR_HPUX_mmap 71
-#define __NR_HPUX_vadvise 72
-#define __NR_HPUX_munmap 73
-#define __NR_HPUX_mprotect 74
-#define __NR_HPUX_madvise 75
-#define __NR_HPUX_vhangup 76
-#define __NR_HPUX_swapoff 77
-#define __NR_HPUX_mincore 78
-#define __NR_HPUX_getgroups 79
-#define __NR_HPUX_setgroups 80
-#define __NR_HPUX_getpgrp2 81
-#define __NR_HPUX_setpgrp2 82
-#define __NR_HPUX_setitimer 83
-#define __NR_HPUX_wait3 84
-#define __NR_HPUX_swapon 85
-#define __NR_HPUX_getitimer 86
-#define __NR_HPUX_gethostname42 87
-#define __NR_HPUX_sethostname42 88
-#define __NR_HPUX_getdtablesize 89
-#define __NR_HPUX_dup2 90
-#define __NR_HPUX_getdopt 91
-#define __NR_HPUX_fstat 92
-#define __NR_HPUX_select 93
-#define __NR_HPUX_setdopt 94
-#define __NR_HPUX_fsync 95
-#define __NR_HPUX_setpriority 96
-#define __NR_HPUX_socket_old 97
-#define __NR_HPUX_connect_old 98
-#define __NR_HPUX_accept_old 99
-#define __NR_HPUX_getpriority 100
-#define __NR_HPUX_send_old 101
-#define __NR_HPUX_recv_old 102
-#define __NR_HPUX_socketaddr_old 103
-#define __NR_HPUX_bind_old 104
-#define __NR_HPUX_setsockopt_old 105
-#define __NR_HPUX_listen_old 106
-#define __NR_HPUX_vtimes_old 107
-#define __NR_HPUX_sigvector 108
-#define __NR_HPUX_sigblock 109
-#define __NR_HPUX_siggetmask 110
-#define __NR_HPUX_sigpause 111
-#define __NR_HPUX_sigstack 112
-#define __NR_HPUX_recvmsg_old 113
-#define __NR_HPUX_sendmsg_old 114
-#define __NR_HPUX_vtrace_old 115
-#define __NR_HPUX_gettimeofday 116
-#define __NR_HPUX_getrusage 117
-#define __NR_HPUX_getsockopt_old 118
-#define __NR_HPUX_resuba_old 119
-#define __NR_HPUX_readv 120
-#define __NR_HPUX_writev 121
-#define __NR_HPUX_settimeofday 122
-#define __NR_HPUX_fchown 123
-#define __NR_HPUX_fchmod 124
-#define __NR_HPUX_recvfrom_old 125
-#define __NR_HPUX_setresuid 126
-#define __NR_HPUX_setresgid 127
-#define __NR_HPUX_rename 128
-#define __NR_HPUX_truncate 129
-#define __NR_HPUX_ftruncate 130
-#define __NR_HPUX_flock_old 131
-#define __NR_HPUX_sysconf 132
-#define __NR_HPUX_sendto_old 133
-#define __NR_HPUX_shutdown_old 134
-#define __NR_HPUX_socketpair_old 135
-#define __NR_HPUX_mkdir 136
-#define __NR_HPUX_rmdir 137
-#define __NR_HPUX_utimes_old 138
-#define __NR_HPUX_sigcleanup_old 139
-#define __NR_HPUX_setcore 140
-#define __NR_HPUX_getpeername_old 141
-#define __NR_HPUX_gethostid 142
-#define __NR_HPUX_sethostid 143
-#define __NR_HPUX_getrlimit 144
-#define __NR_HPUX_setrlimit 145
-#define __NR_HPUX_killpg_old 146
-#define __NR_HPUX_cachectl 147
-#define __NR_HPUX_quotactl 148
-#define __NR_HPUX_get_sysinfo 149
-#define __NR_HPUX_getsockname_old 150
-#define __NR_HPUX_privgrp 151
-#define __NR_HPUX_rtprio 152
-#define __NR_HPUX_plock 153
-#define __NR_HPUX_reserved3 154
-#define __NR_HPUX_lockf 155
-#define __NR_HPUX_semget 156
-#define __NR_HPUX_osemctl 157
-#define __NR_HPUX_semop 158
-#define __NR_HPUX_msgget 159
-#define __NR_HPUX_omsgctl 160
-#define __NR_HPUX_msgsnd 161
-#define __NR_HPUX_msgrecv 162
-#define __NR_HPUX_shmget 163
-#define __NR_HPUX_oshmctl 164
-#define __NR_HPUX_shmat 165
-#define __NR_HPUX_shmdt 166
-#define __NR_HPUX_m68020_advise 167
-/* [168,189] are for Discless/DUX */
-#define __NR_HPUX_csp 168
-#define __NR_HPUX_cluster 169
-#define __NR_HPUX_mkrnod 170
-#define __NR_HPUX_test 171
-#define __NR_HPUX_unsp_open 172
-#define __NR_HPUX_reserved4 173
-#define __NR_HPUX_getcontext_old 174
-#define __NR_HPUX_osetcontext 175
-#define __NR_HPUX_bigio 176
-#define __NR_HPUX_pipenode 177
-#define __NR_HPUX_lsync 178
-#define __NR_HPUX_getmachineid 179
-#define __NR_HPUX_cnodeid 180
-#define __NR_HPUX_cnodes 181
-#define __NR_HPUX_swapclients 182
-#define __NR_HPUX_rmt_process 183
-#define __NR_HPUX_dskless_stats 184
-#define __NR_HPUX_sigprocmask 185
-#define __NR_HPUX_sigpending 186
-#define __NR_HPUX_sigsuspend 187
-#define __NR_HPUX_sigaction 188
-#define __NR_HPUX_reserved5 189
-#define __NR_HPUX_nfssvc 190
-#define __NR_HPUX_getfh 191
-#define __NR_HPUX_getdomainname 192
-#define __NR_HPUX_setdomainname 193
-#define __NR_HPUX_async_daemon 194
-#define __NR_HPUX_getdirentries 195
-#define __NR_HPUX_statfs 196
-#define __NR_HPUX_fstatfs 197
-#define __NR_HPUX_vfsmount 198
-#define __NR_HPUX_reserved6 199
-#define __NR_HPUX_waitpid 200
-/* 201 - 223 missing */
-#define __NR_HPUX_sigsetreturn 224
-#define __NR_HPUX_sigsetstatemask 225
-/* 226 missing */
-#define __NR_HPUX_cs 227
-#define __NR_HPUX_cds 228
-#define __NR_HPUX_set_no_trunc 229
-#define __NR_HPUX_pathconf 230
-#define __NR_HPUX_fpathconf 231
-/* 232, 233 missing */
-#define __NR_HPUX_nfs_fcntl 234
-#define __NR_HPUX_ogetacl 235
-#define __NR_HPUX_ofgetacl 236
-#define __NR_HPUX_osetacl 237
-#define __NR_HPUX_ofsetacl 238
-#define __NR_HPUX_pstat 239
-#define __NR_HPUX_getaudid 240
-#define __NR_HPUX_setaudid 241
-#define __NR_HPUX_getaudproc 242
-#define __NR_HPUX_setaudproc 243
-#define __NR_HPUX_getevent 244
-#define __NR_HPUX_setevent 245
-#define __NR_HPUX_audwrite 246
-#define __NR_HPUX_audswitch 247
-#define __NR_HPUX_audctl 248
-#define __NR_HPUX_ogetaccess 249
-#define __NR_HPUX_fsctl 250
-/* 251 - 258 missing */
-#define __NR_HPUX_swapfs 259
-#define __NR_HPUX_fss 260
-/* 261 - 266 missing */
-#define __NR_HPUX_tsync 267
-#define __NR_HPUX_getnumfds 268
-#define __NR_HPUX_poll 269
-#define __NR_HPUX_getmsg 270
-#define __NR_HPUX_putmsg 271
-#define __NR_HPUX_fchdir 272
-#define __NR_HPUX_getmount_cnt 273
-#define __NR_HPUX_getmount_entry 274
-#define __NR_HPUX_accept 275
-#define __NR_HPUX_bind 276
-#define __NR_HPUX_connect 277
-#define __NR_HPUX_getpeername 278
-#define __NR_HPUX_getsockname 279
-#define __NR_HPUX_getsockopt 280
-#define __NR_HPUX_listen 281
-#define __NR_HPUX_recv 282
-#define __NR_HPUX_recvfrom 283
-#define __NR_HPUX_recvmsg 284
-#define __NR_HPUX_send 285
-#define __NR_HPUX_sendmsg 286
-#define __NR_HPUX_sendto 287
-#define __NR_HPUX_setsockopt 288
-#define __NR_HPUX_shutdown 289
-#define __NR_HPUX_socket 290
-#define __NR_HPUX_socketpair 291
-#define __NR_HPUX_proc_open 292
-#define __NR_HPUX_proc_close 293
-#define __NR_HPUX_proc_send 294
-#define __NR_HPUX_proc_recv 295
-#define __NR_HPUX_proc_sendrecv 296
-#define __NR_HPUX_proc_syscall 297
-/* 298 - 311 missing */
-#define __NR_HPUX_semctl 312
-#define __NR_HPUX_msgctl 313
-#define __NR_HPUX_shmctl 314
-#define __NR_HPUX_mpctl 315
-#define __NR_HPUX_exportfs 316
-#define __NR_HPUX_getpmsg 317
-#define __NR_HPUX_putpmsg 318
-/* 319 missing */
-#define __NR_HPUX_msync 320
-#define __NR_HPUX_msleep 321
-#define __NR_HPUX_mwakeup 322
-#define __NR_HPUX_msem_init 323
-#define __NR_HPUX_msem_remove 324
-#define __NR_HPUX_adjtime 325
-#define __NR_HPUX_kload 326
-#define __NR_HPUX_fattach 327
-#define __NR_HPUX_fdetach 328
-#define __NR_HPUX_serialize 329
-#define __NR_HPUX_statvfs 330
-#define __NR_HPUX_fstatvfs 331
-#define __NR_HPUX_lchown 332
-#define __NR_HPUX_getsid 333
-#define __NR_HPUX_sysfs 334
-/* 335, 336 missing */
-#define __NR_HPUX_sched_setparam 337
-#define __NR_HPUX_sched_getparam 338
-#define __NR_HPUX_sched_setscheduler 339
-#define __NR_HPUX_sched_getscheduler 340
-#define __NR_HPUX_sched_yield 341
-#define __NR_HPUX_sched_get_priority_max 342
-#define __NR_HPUX_sched_get_priority_min 343
-#define __NR_HPUX_sched_rr_get_interval 344
-#define __NR_HPUX_clock_settime 345
-#define __NR_HPUX_clock_gettime 346
-#define __NR_HPUX_clock_getres 347
-#define __NR_HPUX_timer_create 348
-#define __NR_HPUX_timer_delete 349
-#define __NR_HPUX_timer_settime 350
-#define __NR_HPUX_timer_gettime 351
-#define __NR_HPUX_timer_getoverrun 352
-#define __NR_HPUX_nanosleep 353
-#define __NR_HPUX_toolbox 354
-/* 355 missing */
-#define __NR_HPUX_getdents 356
-#define __NR_HPUX_getcontext 357
-#define __NR_HPUX_sysinfo 358
-#define __NR_HPUX_fcntl64 359
-#define __NR_HPUX_ftruncate64 360
-#define __NR_HPUX_fstat64 361
-#define __NR_HPUX_getdirentries64 362
-#define __NR_HPUX_getrlimit64 363
-#define __NR_HPUX_lockf64 364
-#define __NR_HPUX_lseek64 365
-#define __NR_HPUX_lstat64 366
-#define __NR_HPUX_mmap64 367
-#define __NR_HPUX_setrlimit64 368
-#define __NR_HPUX_stat64 369
-#define __NR_HPUX_truncate64 370
-#define __NR_HPUX_ulimit64 371
-#define __NR_HPUX_pread 372
-#define __NR_HPUX_preadv 373
-#define __NR_HPUX_pwrite 374
-#define __NR_HPUX_pwritev 375
-#define __NR_HPUX_pread64 376
-#define __NR_HPUX_preadv64 377
-#define __NR_HPUX_pwrite64 378
-#define __NR_HPUX_pwritev64 379
-#define __NR_HPUX_setcontext 380
-#define __NR_HPUX_sigaltstack 381
-#define __NR_HPUX_waitid 382
-#define __NR_HPUX_setpgrp 383
-#define __NR_HPUX_recvmsg2 384
-#define __NR_HPUX_sendmsg2 385
-#define __NR_HPUX_socket2 386
-#define __NR_HPUX_socketpair2 387
-#define __NR_HPUX_setregid 388
-#define __NR_HPUX_lwp_create 389
-#define __NR_HPUX_lwp_terminate 390
-#define __NR_HPUX_lwp_wait 391
-#define __NR_HPUX_lwp_suspend 392
-#define __NR_HPUX_lwp_resume 393
-/* 394 missing */
-#define __NR_HPUX_lwp_abort_syscall 395
-#define __NR_HPUX_lwp_info 396
-#define __NR_HPUX_lwp_kill 397
-#define __NR_HPUX_ksleep 398
-#define __NR_HPUX_kwakeup 399
-/* 400 missing */
-#define __NR_HPUX_pstat_getlwp 401
-#define __NR_HPUX_lwp_exit 402
-#define __NR_HPUX_lwp_continue 403
-#define __NR_HPUX_getacl 404
-#define __NR_HPUX_fgetacl 405
-#define __NR_HPUX_setacl 406
-#define __NR_HPUX_fsetacl 407
-#define __NR_HPUX_getaccess 408
-#define __NR_HPUX_lwp_mutex_init 409
-#define __NR_HPUX_lwp_mutex_lock_sys 410
-#define __NR_HPUX_lwp_mutex_unlock 411
-#define __NR_HPUX_lwp_cond_init 412
-#define __NR_HPUX_lwp_cond_signal 413
-#define __NR_HPUX_lwp_cond_broadcast 414
-#define __NR_HPUX_lwp_cond_wait_sys 415
-#define __NR_HPUX_lwp_getscheduler 416
-#define __NR_HPUX_lwp_setscheduler 417
-#define __NR_HPUX_lwp_getstate 418
-#define __NR_HPUX_lwp_setstate 419
-#define __NR_HPUX_lwp_detach 420
-#define __NR_HPUX_mlock 421
-#define __NR_HPUX_munlock 422
-#define __NR_HPUX_mlockall 423
-#define __NR_HPUX_munlockall 424
-#define __NR_HPUX_shm_open 425
-#define __NR_HPUX_shm_unlink 426
-#define __NR_HPUX_sigqueue 427
-#define __NR_HPUX_sigwaitinfo 428
-#define __NR_HPUX_sigtimedwait 429
-#define __NR_HPUX_sigwait 430
-#define __NR_HPUX_aio_read 431
-#define __NR_HPUX_aio_write 432
-#define __NR_HPUX_lio_listio 433
-#define __NR_HPUX_aio_error 434
-#define __NR_HPUX_aio_return 435
-#define __NR_HPUX_aio_cancel 436
-#define __NR_HPUX_aio_suspend 437
-#define __NR_HPUX_aio_fsync 438
-#define __NR_HPUX_mq_open 439
-#define __NR_HPUX_mq_close 440
-#define __NR_HPUX_mq_unlink 441
-#define __NR_HPUX_mq_send 442
-#define __NR_HPUX_mq_receive 443
-#define __NR_HPUX_mq_notify 444
-#define __NR_HPUX_mq_setattr 445
-#define __NR_HPUX_mq_getattr 446
-#define __NR_HPUX_ksem_open 447
-#define __NR_HPUX_ksem_unlink 448
-#define __NR_HPUX_ksem_close 449
-#define __NR_HPUX_ksem_post 450
-#define __NR_HPUX_ksem_wait 451
-#define __NR_HPUX_ksem_read 452
-#define __NR_HPUX_ksem_trywait 453
-#define __NR_HPUX_lwp_rwlock_init 454
-#define __NR_HPUX_lwp_rwlock_destroy 455
-#define __NR_HPUX_lwp_rwlock_rdlock_sys 456
-#define __NR_HPUX_lwp_rwlock_wrlock_sys 457
-#define __NR_HPUX_lwp_rwlock_tryrdlock 458
-#define __NR_HPUX_lwp_rwlock_trywrlock 459
-#define __NR_HPUX_lwp_rwlock_unlock 460
-#define __NR_HPUX_ttrace 461
-#define __NR_HPUX_ttrace_wait 462
-#define __NR_HPUX_lf_wire_mem 463
-#define __NR_HPUX_lf_unwire_mem 464
-#define __NR_HPUX_lf_send_pin_map 465
-#define __NR_HPUX_lf_free_buf 466
-#define __NR_HPUX_lf_wait_nq 467
-#define __NR_HPUX_lf_wakeup_conn_q 468
-#define __NR_HPUX_lf_unused 469
-#define __NR_HPUX_lwp_sema_init 470
-#define __NR_HPUX_lwp_sema_post 471
-#define __NR_HPUX_lwp_sema_wait 472
-#define __NR_HPUX_lwp_sema_trywait 473
-#define __NR_HPUX_lwp_sema_destroy 474
-#define __NR_HPUX_statvfs64 475
-#define __NR_HPUX_fstatvfs64 476
-#define __NR_HPUX_msh_register 477
-#define __NR_HPUX_ptrace64 478
-#define __NR_HPUX_sendfile 479
-#define __NR_HPUX_sendpath 480
-#define __NR_HPUX_sendfile64 481
-#define __NR_HPUX_sendpath64 482
-#define __NR_HPUX_modload 483
-#define __NR_HPUX_moduload 484
-#define __NR_HPUX_modpath 485
-#define __NR_HPUX_getksym 486
-#define __NR_HPUX_modadm 487
-#define __NR_HPUX_modstat 488
-#define __NR_HPUX_lwp_detached_exit 489
-#define __NR_HPUX_crashconf 490
-#define __NR_HPUX_siginhibit 491
-#define __NR_HPUX_sigenable 492
-#define __NR_HPUX_spuctl 493
-#define __NR_HPUX_zerokernelsum 494
-#define __NR_HPUX_nfs_kstat 495
-#define __NR_HPUX_aio_read64 496
-#define __NR_HPUX_aio_write64 497
-#define __NR_HPUX_aio_error64 498
-#define __NR_HPUX_aio_return64 499
-#define __NR_HPUX_aio_cancel64 500
-#define __NR_HPUX_aio_suspend64 501
-#define __NR_HPUX_aio_fsync64 502
-#define __NR_HPUX_lio_listio64 503
-#define __NR_HPUX_recv2 504
-#define __NR_HPUX_recvfrom2 505
-#define __NR_HPUX_send2 506
-#define __NR_HPUX_sendto2 507
-#define __NR_HPUX_acl 508
-#define __NR_HPUX___cnx_p2p_ctl 509
-#define __NR_HPUX___cnx_gsched_ctl 510
-#define __NR_HPUX___cnx_pmon_ctl 511
-
-#define __NR_HPUX_syscalls 512
-
-/*
- * Linux system call numbers.
- *
- * Cary Coutant says that we should just use another syscall gateway
- * page to avoid clashing with the HPUX space, and I think he's right:
- * it will would keep a branch out of our syscall entry path, at the
- * very least. If we decide to change it later, we can ``just'' tweak
- * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be
- * 1024 or something. Oh, and recompile libc. =)
- *
- * 64-bit HPUX binaries get the syscall gateway address passed in a register
- * from the kernel at startup, which seems a sane strategy.
- */
-
-#define __NR_Linux 0
-#define __NR_restart_syscall (__NR_Linux + 0)
-#define __NR_exit (__NR_Linux + 1)
-#define __NR_fork (__NR_Linux + 2)
-#define __NR_read (__NR_Linux + 3)
-#define __NR_write (__NR_Linux + 4)
-#define __NR_open (__NR_Linux + 5)
-#define __NR_close (__NR_Linux + 6)
-#define __NR_waitpid (__NR_Linux + 7)
-#define __NR_creat (__NR_Linux + 8)
-#define __NR_link (__NR_Linux + 9)
-#define __NR_unlink (__NR_Linux + 10)
-#define __NR_execve (__NR_Linux + 11)
-#define __NR_chdir (__NR_Linux + 12)
-#define __NR_time (__NR_Linux + 13)
-#define __NR_mknod (__NR_Linux + 14)
-#define __NR_chmod (__NR_Linux + 15)
-#define __NR_lchown (__NR_Linux + 16)
-#define __NR_socket (__NR_Linux + 17)
-#define __NR_stat (__NR_Linux + 18)
-#define __NR_lseek (__NR_Linux + 19)
-#define __NR_getpid (__NR_Linux + 20)
-#define __NR_mount (__NR_Linux + 21)
-#define __NR_bind (__NR_Linux + 22)
-#define __NR_setuid (__NR_Linux + 23)
-#define __NR_getuid (__NR_Linux + 24)
-#define __NR_stime (__NR_Linux + 25)
-#define __NR_ptrace (__NR_Linux + 26)
-#define __NR_alarm (__NR_Linux + 27)
-#define __NR_fstat (__NR_Linux + 28)
-#define __NR_pause (__NR_Linux + 29)
-#define __NR_utime (__NR_Linux + 30)
-#define __NR_connect (__NR_Linux + 31)
-#define __NR_listen (__NR_Linux + 32)
-#define __NR_access (__NR_Linux + 33)
-#define __NR_nice (__NR_Linux + 34)
-#define __NR_accept (__NR_Linux + 35)
-#define __NR_sync (__NR_Linux + 36)
-#define __NR_kill (__NR_Linux + 37)
-#define __NR_rename (__NR_Linux + 38)
-#define __NR_mkdir (__NR_Linux + 39)
-#define __NR_rmdir (__NR_Linux + 40)
-#define __NR_dup (__NR_Linux + 41)
-#define __NR_pipe (__NR_Linux + 42)
-#define __NR_times (__NR_Linux + 43)
-#define __NR_getsockname (__NR_Linux + 44)
-#define __NR_brk (__NR_Linux + 45)
-#define __NR_setgid (__NR_Linux + 46)
-#define __NR_getgid (__NR_Linux + 47)
-#define __NR_signal (__NR_Linux + 48)
-#define __NR_geteuid (__NR_Linux + 49)
-#define __NR_getegid (__NR_Linux + 50)
-#define __NR_acct (__NR_Linux + 51)
-#define __NR_umount2 (__NR_Linux + 52)
-#define __NR_getpeername (__NR_Linux + 53)
-#define __NR_ioctl (__NR_Linux + 54)
-#define __NR_fcntl (__NR_Linux + 55)
-#define __NR_socketpair (__NR_Linux + 56)
-#define __NR_setpgid (__NR_Linux + 57)
-#define __NR_send (__NR_Linux + 58)
-#define __NR_uname (__NR_Linux + 59)
-#define __NR_umask (__NR_Linux + 60)
-#define __NR_chroot (__NR_Linux + 61)
-#define __NR_ustat (__NR_Linux + 62)
-#define __NR_dup2 (__NR_Linux + 63)
-#define __NR_getppid (__NR_Linux + 64)
-#define __NR_getpgrp (__NR_Linux + 65)
-#define __NR_setsid (__NR_Linux + 66)
-#define __NR_pivot_root (__NR_Linux + 67)
-#define __NR_sgetmask (__NR_Linux + 68)
-#define __NR_ssetmask (__NR_Linux + 69)
-#define __NR_setreuid (__NR_Linux + 70)
-#define __NR_setregid (__NR_Linux + 71)
-#define __NR_mincore (__NR_Linux + 72)
-#define __NR_sigpending (__NR_Linux + 73)
-#define __NR_sethostname (__NR_Linux + 74)
-#define __NR_setrlimit (__NR_Linux + 75)
-#define __NR_getrlimit (__NR_Linux + 76)
-#define __NR_getrusage (__NR_Linux + 77)
-#define __NR_gettimeofday (__NR_Linux + 78)
-#define __NR_settimeofday (__NR_Linux + 79)
-#define __NR_getgroups (__NR_Linux + 80)
-#define __NR_setgroups (__NR_Linux + 81)
-#define __NR_sendto (__NR_Linux + 82)
-#define __NR_symlink (__NR_Linux + 83)
-#define __NR_lstat (__NR_Linux + 84)
-#define __NR_readlink (__NR_Linux + 85)
-#define __NR_uselib (__NR_Linux + 86)
-#define __NR_swapon (__NR_Linux + 87)
-#define __NR_reboot (__NR_Linux + 88)
-#define __NR_mmap2 (__NR_Linux + 89)
-#define __NR_mmap (__NR_Linux + 90)
-#define __NR_munmap (__NR_Linux + 91)
-#define __NR_truncate (__NR_Linux + 92)
-#define __NR_ftruncate (__NR_Linux + 93)
-#define __NR_fchmod (__NR_Linux + 94)
-#define __NR_fchown (__NR_Linux + 95)
-#define __NR_getpriority (__NR_Linux + 96)
-#define __NR_setpriority (__NR_Linux + 97)
-#define __NR_recv (__NR_Linux + 98)
-#define __NR_statfs (__NR_Linux + 99)
-#define __NR_fstatfs (__NR_Linux + 100)
-#define __NR_stat64 (__NR_Linux + 101)
-/* #define __NR_socketcall (__NR_Linux + 102) */
-#define __NR_syslog (__NR_Linux + 103)
-#define __NR_setitimer (__NR_Linux + 104)
-#define __NR_getitimer (__NR_Linux + 105)
-#define __NR_capget (__NR_Linux + 106)
-#define __NR_capset (__NR_Linux + 107)
-#define __NR_pread64 (__NR_Linux + 108)
-#define __NR_pwrite64 (__NR_Linux + 109)
-#define __NR_getcwd (__NR_Linux + 110)
-#define __NR_vhangup (__NR_Linux + 111)
-#define __NR_fstat64 (__NR_Linux + 112)
-#define __NR_vfork (__NR_Linux + 113)
-#define __NR_wait4 (__NR_Linux + 114)
-#define __NR_swapoff (__NR_Linux + 115)
-#define __NR_sysinfo (__NR_Linux + 116)
-#define __NR_shutdown (__NR_Linux + 117)
-#define __NR_fsync (__NR_Linux + 118)
-#define __NR_madvise (__NR_Linux + 119)
-#define __NR_clone (__NR_Linux + 120)
-#define __NR_setdomainname (__NR_Linux + 121)
-#define __NR_sendfile (__NR_Linux + 122)
-#define __NR_recvfrom (__NR_Linux + 123)
-#define __NR_adjtimex (__NR_Linux + 124)
-#define __NR_mprotect (__NR_Linux + 125)
-#define __NR_sigprocmask (__NR_Linux + 126)
-#define __NR_create_module (__NR_Linux + 127)
-#define __NR_init_module (__NR_Linux + 128)
-#define __NR_delete_module (__NR_Linux + 129)
-#define __NR_get_kernel_syms (__NR_Linux + 130)
-#define __NR_quotactl (__NR_Linux + 131)
-#define __NR_getpgid (__NR_Linux + 132)
-#define __NR_fchdir (__NR_Linux + 133)
-#define __NR_bdflush (__NR_Linux + 134)
-#define __NR_sysfs (__NR_Linux + 135)
-#define __NR_personality (__NR_Linux + 136)
-#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */
-#define __NR_setfsuid (__NR_Linux + 138)
-#define __NR_setfsgid (__NR_Linux + 139)
-#define __NR__llseek (__NR_Linux + 140)
-#define __NR_getdents (__NR_Linux + 141)
-#define __NR__newselect (__NR_Linux + 142)
-#define __NR_flock (__NR_Linux + 143)
-#define __NR_msync (__NR_Linux + 144)
-#define __NR_readv (__NR_Linux + 145)
-#define __NR_writev (__NR_Linux + 146)
-#define __NR_getsid (__NR_Linux + 147)
-#define __NR_fdatasync (__NR_Linux + 148)
-#define __NR__sysctl (__NR_Linux + 149)
-#define __NR_mlock (__NR_Linux + 150)
-#define __NR_munlock (__NR_Linux + 151)
-#define __NR_mlockall (__NR_Linux + 152)
-#define __NR_munlockall (__NR_Linux + 153)
-#define __NR_sched_setparam (__NR_Linux + 154)
-#define __NR_sched_getparam (__NR_Linux + 155)
-#define __NR_sched_setscheduler (__NR_Linux + 156)
-#define __NR_sched_getscheduler (__NR_Linux + 157)
-#define __NR_sched_yield (__NR_Linux + 158)
-#define __NR_sched_get_priority_max (__NR_Linux + 159)
-#define __NR_sched_get_priority_min (__NR_Linux + 160)
-#define __NR_sched_rr_get_interval (__NR_Linux + 161)
-#define __NR_nanosleep (__NR_Linux + 162)
-#define __NR_mremap (__NR_Linux + 163)
-#define __NR_setresuid (__NR_Linux + 164)
-#define __NR_getresuid (__NR_Linux + 165)
-#define __NR_sigaltstack (__NR_Linux + 166)
-#define __NR_query_module (__NR_Linux + 167)
-#define __NR_poll (__NR_Linux + 168)
-#define __NR_nfsservctl (__NR_Linux + 169)
-#define __NR_setresgid (__NR_Linux + 170)
-#define __NR_getresgid (__NR_Linux + 171)
-#define __NR_prctl (__NR_Linux + 172)
-#define __NR_rt_sigreturn (__NR_Linux + 173)
-#define __NR_rt_sigaction (__NR_Linux + 174)
-#define __NR_rt_sigprocmask (__NR_Linux + 175)
-#define __NR_rt_sigpending (__NR_Linux + 176)
-#define __NR_rt_sigtimedwait (__NR_Linux + 177)
-#define __NR_rt_sigqueueinfo (__NR_Linux + 178)
-#define __NR_rt_sigsuspend (__NR_Linux + 179)
-#define __NR_chown (__NR_Linux + 180)
-#define __NR_setsockopt (__NR_Linux + 181)
-#define __NR_getsockopt (__NR_Linux + 182)
-#define __NR_sendmsg (__NR_Linux + 183)
-#define __NR_recvmsg (__NR_Linux + 184)
-#define __NR_semop (__NR_Linux + 185)
-#define __NR_semget (__NR_Linux + 186)
-#define __NR_semctl (__NR_Linux + 187)
-#define __NR_msgsnd (__NR_Linux + 188)
-#define __NR_msgrcv (__NR_Linux + 189)
-#define __NR_msgget (__NR_Linux + 190)
-#define __NR_msgctl (__NR_Linux + 191)
-#define __NR_shmat (__NR_Linux + 192)
-#define __NR_shmdt (__NR_Linux + 193)
-#define __NR_shmget (__NR_Linux + 194)
-#define __NR_shmctl (__NR_Linux + 195)
-
-#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */
-#define __NR_putpmsg (__NR_Linux + 197)
-
-#define __NR_lstat64 (__NR_Linux + 198)
-#define __NR_truncate64 (__NR_Linux + 199)
-#define __NR_ftruncate64 (__NR_Linux + 200)
-#define __NR_getdents64 (__NR_Linux + 201)
-#define __NR_fcntl64 (__NR_Linux + 202)
-#define __NR_attrctl (__NR_Linux + 203)
-#define __NR_acl_get (__NR_Linux + 204)
-#define __NR_acl_set (__NR_Linux + 205)
-#define __NR_gettid (__NR_Linux + 206)
-#define __NR_readahead (__NR_Linux + 207)
-#define __NR_tkill (__NR_Linux + 208)
-#define __NR_sendfile64 (__NR_Linux + 209)
-#define __NR_futex (__NR_Linux + 210)
-#define __NR_sched_setaffinity (__NR_Linux + 211)
-#define __NR_sched_getaffinity (__NR_Linux + 212)
-#define __NR_set_thread_area (__NR_Linux + 213)
-#define __NR_get_thread_area (__NR_Linux + 214)
-#define __NR_io_setup (__NR_Linux + 215)
-#define __NR_io_destroy (__NR_Linux + 216)
-#define __NR_io_getevents (__NR_Linux + 217)
-#define __NR_io_submit (__NR_Linux + 218)
-#define __NR_io_cancel (__NR_Linux + 219)
-#define __NR_alloc_hugepages (__NR_Linux + 220)
-#define __NR_free_hugepages (__NR_Linux + 221)
-#define __NR_exit_group (__NR_Linux + 222)
-#define __NR_lookup_dcookie (__NR_Linux + 223)
-#define __NR_epoll_create (__NR_Linux + 224)
-#define __NR_epoll_ctl (__NR_Linux + 225)
-#define __NR_epoll_wait (__NR_Linux + 226)
-#define __NR_remap_file_pages (__NR_Linux + 227)
-#define __NR_semtimedop (__NR_Linux + 228)
-#define __NR_mq_open (__NR_Linux + 229)
-#define __NR_mq_unlink (__NR_Linux + 230)
-#define __NR_mq_timedsend (__NR_Linux + 231)
-#define __NR_mq_timedreceive (__NR_Linux + 232)
-#define __NR_mq_notify (__NR_Linux + 233)
-#define __NR_mq_getsetattr (__NR_Linux + 234)
-#define __NR_waitid (__NR_Linux + 235)
-#define __NR_fadvise64_64 (__NR_Linux + 236)
-#define __NR_set_tid_address (__NR_Linux + 237)
-#define __NR_setxattr (__NR_Linux + 238)
-#define __NR_lsetxattr (__NR_Linux + 239)
-#define __NR_fsetxattr (__NR_Linux + 240)
-#define __NR_getxattr (__NR_Linux + 241)
-#define __NR_lgetxattr (__NR_Linux + 242)
-#define __NR_fgetxattr (__NR_Linux + 243)
-#define __NR_listxattr (__NR_Linux + 244)
-#define __NR_llistxattr (__NR_Linux + 245)
-#define __NR_flistxattr (__NR_Linux + 246)
-#define __NR_removexattr (__NR_Linux + 247)
-#define __NR_lremovexattr (__NR_Linux + 248)
-#define __NR_fremovexattr (__NR_Linux + 249)
-#define __NR_timer_create (__NR_Linux + 250)
-#define __NR_timer_settime (__NR_Linux + 251)
-#define __NR_timer_gettime (__NR_Linux + 252)
-#define __NR_timer_getoverrun (__NR_Linux + 253)
-#define __NR_timer_delete (__NR_Linux + 254)
-#define __NR_clock_settime (__NR_Linux + 255)
-#define __NR_clock_gettime (__NR_Linux + 256)
-#define __NR_clock_getres (__NR_Linux + 257)
-#define __NR_clock_nanosleep (__NR_Linux + 258)
-#define __NR_tgkill (__NR_Linux + 259)
-#define __NR_mbind (__NR_Linux + 260)
-#define __NR_get_mempolicy (__NR_Linux + 261)
-#define __NR_set_mempolicy (__NR_Linux + 262)
-#define __NR_vserver (__NR_Linux + 263)
-#define __NR_add_key (__NR_Linux + 264)
-#define __NR_request_key (__NR_Linux + 265)
-#define __NR_keyctl (__NR_Linux + 266)
-#define __NR_ioprio_set (__NR_Linux + 267)
-#define __NR_ioprio_get (__NR_Linux + 268)
-#define __NR_inotify_init (__NR_Linux + 269)
-#define __NR_inotify_add_watch (__NR_Linux + 270)
-#define __NR_inotify_rm_watch (__NR_Linux + 271)
-#define __NR_migrate_pages (__NR_Linux + 272)
-#define __NR_pselect6 (__NR_Linux + 273)
-#define __NR_ppoll (__NR_Linux + 274)
-#define __NR_openat (__NR_Linux + 275)
-#define __NR_mkdirat (__NR_Linux + 276)
-#define __NR_mknodat (__NR_Linux + 277)
-#define __NR_fchownat (__NR_Linux + 278)
-#define __NR_futimesat (__NR_Linux + 279)
-#define __NR_fstatat64 (__NR_Linux + 280)
-#define __NR_unlinkat (__NR_Linux + 281)
-#define __NR_renameat (__NR_Linux + 282)
-#define __NR_linkat (__NR_Linux + 283)
-#define __NR_symlinkat (__NR_Linux + 284)
-#define __NR_readlinkat (__NR_Linux + 285)
-#define __NR_fchmodat (__NR_Linux + 286)
-#define __NR_faccessat (__NR_Linux + 287)
-#define __NR_unshare (__NR_Linux + 288)
-#define __NR_set_robust_list (__NR_Linux + 289)
-#define __NR_get_robust_list (__NR_Linux + 290)
-#define __NR_splice (__NR_Linux + 291)
-#define __NR_sync_file_range (__NR_Linux + 292)
-#define __NR_tee (__NR_Linux + 293)
-#define __NR_vmsplice (__NR_Linux + 294)
-#define __NR_move_pages (__NR_Linux + 295)
-#define __NR_getcpu (__NR_Linux + 296)
-#define __NR_epoll_pwait (__NR_Linux + 297)
-#define __NR_statfs64 (__NR_Linux + 298)
-#define __NR_fstatfs64 (__NR_Linux + 299)
-#define __NR_kexec_load (__NR_Linux + 300)
-#define __NR_utimensat (__NR_Linux + 301)
-#define __NR_signalfd (__NR_Linux + 302)
-#define __NR_timerfd (__NR_Linux + 303)
-#define __NR_eventfd (__NR_Linux + 304)
-#define __NR_fallocate (__NR_Linux + 305)
-#define __NR_timerfd_create (__NR_Linux + 306)
-#define __NR_timerfd_settime (__NR_Linux + 307)
-#define __NR_timerfd_gettime (__NR_Linux + 308)
-#define __NR_signalfd4 (__NR_Linux + 309)
-#define __NR_eventfd2 (__NR_Linux + 310)
-#define __NR_epoll_create1 (__NR_Linux + 311)
-#define __NR_dup3 (__NR_Linux + 312)
-#define __NR_pipe2 (__NR_Linux + 313)
-#define __NR_inotify_init1 (__NR_Linux + 314)
-#define __NR_preadv (__NR_Linux + 315)
-#define __NR_pwritev (__NR_Linux + 316)
-#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317)
-#define __NR_perf_event_open (__NR_Linux + 318)
-#define __NR_recvmmsg (__NR_Linux + 319)
-#define __NR_accept4 (__NR_Linux + 320)
-#define __NR_prlimit64 (__NR_Linux + 321)
-#define __NR_fanotify_init (__NR_Linux + 322)
-#define __NR_fanotify_mark (__NR_Linux + 323)
-#define __NR_clock_adjtime (__NR_Linux + 324)
-#define __NR_name_to_handle_at (__NR_Linux + 325)
-#define __NR_open_by_handle_at (__NR_Linux + 326)
-#define __NR_syncfs (__NR_Linux + 327)
-#define __NR_setns (__NR_Linux + 328)
-#define __NR_sendmmsg (__NR_Linux + 329)
-
-#define __NR_Linux_syscalls (__NR_sendmmsg + 1)
-
-
-#define __IGNORE_select /* newselect */
-#define __IGNORE_fadvise64 /* fadvise64_64 */
-#define __IGNORE_utimes /* utime */
-
-
-#define HPUX_GATEWAY_ADDR 0xC0000004
-#define LINUX_GATEWAY_ADDR 0x100
+#include <uapi/asm/unistd.h>
-#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#define SYS_ify(syscall_name) __NR_##syscall_name
*/
#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif /* __KERNEL__ */
#endif /* _ASM_PARISC_UNISTD_H_ */
+++ /dev/null
-/* This file should not exist, but lots of generic code still includes
- it. It's a hangover from old a.out days and the traditional core
- dump format. We are ELF-only, and so are our core dumps. If we
- need to support HP/UX core format then we'll do it here
- eventually. */
+++ /dev/null
-#ifndef __ASM_PARISC_VGA_H__
-#define __ASM_PARISC_VGA_H__
-
-/* nothing */
-
-#endif /* __ASM_PARISC_VGA_H__ */
+++ /dev/null
-#include <asm-generic/xor.h>
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += pdc.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
--- /dev/null
+#ifndef __ASM_PARISC_BITSPERLONG_H
+#define __ASM_PARISC_BITSPERLONG_H
+
+/*
+ * using CONFIG_* outside of __KERNEL__ is wrong,
+ * __LP64__ was also removed from headers, so what
+ * is the right approach on parisc?
+ * -arnd
+ */
+#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__)
+#define __BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
+#else
+#define __BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_PARISC_BITSPERLONG_H */
--- /dev/null
+#ifndef _PARISC_BYTEORDER_H
+#define _PARISC_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PARISC_BYTEORDER_H */
--- /dev/null
+#ifndef _PARISC_ERRNO_H
+#define _PARISC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define EDEADLOCK EDEADLK
+#define ENOLCK 46 /* No record locks available */
+#define EILSEQ 47 /* Illegal byte sequence */
+
+#define ENONET 50 /* Machine is not on the network */
+#define ENODATA 51 /* No data available */
+#define ETIME 52 /* Timer expired */
+#define ENOSR 53 /* Out of streams resources */
+#define ENOSTR 54 /* Device not a stream */
+#define ENOPKG 55 /* Package not installed */
+
+#define ENOLINK 57 /* Link has been severed */
+#define EADV 58 /* Advertise error */
+#define ESRMNT 59 /* Srmount error */
+#define ECOMM 60 /* Communication error on send */
+#define EPROTO 61 /* Protocol error */
+
+#define EMULTIHOP 64 /* Multihop attempted */
+
+#define EDOTDOT 66 /* RFS specific error */
+#define EBADMSG 67 /* Not a data message */
+#define EUSERS 68 /* Too many users */
+#define EDQUOT 69 /* Quota exceeded */
+#define ESTALE 70 /* Stale NFS file handle */
+#define EREMOTE 71 /* Object is remote */
+#define EOVERFLOW 72 /* Value too large for defined data type */
+
+/* these errnos are defined by Linux but not HPUX. */
+
+#define EBADE 160 /* Invalid exchange */
+#define EBADR 161 /* Invalid request descriptor */
+#define EXFULL 162 /* Exchange full */
+#define ENOANO 163 /* No anode */
+#define EBADRQC 164 /* Invalid request code */
+#define EBADSLT 165 /* Invalid slot */
+#define EBFONT 166 /* Bad font file format */
+#define ENOTUNIQ 167 /* Name not unique on network */
+#define EBADFD 168 /* File descriptor in bad state */
+#define EREMCHG 169 /* Remote address changed */
+#define ELIBACC 170 /* Can not access a needed shared library */
+#define ELIBBAD 171 /* Accessing a corrupted shared library */
+#define ELIBSCN 172 /* .lib section in a.out corrupted */
+#define ELIBMAX 173 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 174 /* Cannot exec a shared library directly */
+#define ERESTART 175 /* Interrupted system call should be restarted */
+#define ESTRPIPE 176 /* Streams pipe error */
+#define EUCLEAN 177 /* Structure needs cleaning */
+#define ENOTNAM 178 /* Not a XENIX named type file */
+#define ENAVAIL 179 /* No XENIX semaphores available */
+#define EISNAM 180 /* Is a named type file */
+#define EREMOTEIO 181 /* Remote I/O error */
+#define ENOMEDIUM 182 /* No medium found */
+#define EMEDIUMTYPE 183 /* Wrong medium type */
+#define ENOKEY 184 /* Required key not available */
+#define EKEYEXPIRED 185 /* Key has expired */
+#define EKEYREVOKED 186 /* Key has been revoked */
+#define EKEYREJECTED 187 /* Key was rejected by service */
+
+/* We now return you to your regularly scheduled HPUX. */
+
+#define ENOSYM 215 /* symbol does not exist in executable */
+#define ENOTSOCK 216 /* Socket operation on non-socket */
+#define EDESTADDRREQ 217 /* Destination address required */
+#define EMSGSIZE 218 /* Message too long */
+#define EPROTOTYPE 219 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 220 /* Protocol not available */
+#define EPROTONOSUPPORT 221 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 222 /* Socket type not supported */
+#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 224 /* Protocol family not supported */
+#define EAFNOSUPPORT 225 /* Address family not supported by protocol */
+#define EADDRINUSE 226 /* Address already in use */
+#define EADDRNOTAVAIL 227 /* Cannot assign requested address */
+#define ENETDOWN 228 /* Network is down */
+#define ENETUNREACH 229 /* Network is unreachable */
+#define ENETRESET 230 /* Network dropped connection because of reset */
+#define ECONNABORTED 231 /* Software caused connection abort */
+#define ECONNRESET 232 /* Connection reset by peer */
+#define ENOBUFS 233 /* No buffer space available */
+#define EISCONN 234 /* Transport endpoint is already connected */
+#define ENOTCONN 235 /* Transport endpoint is not connected */
+#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 237 /* Too many references: cannot splice */
+#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */
+#define ETIMEDOUT 238 /* Connection timed out */
+#define ECONNREFUSED 239 /* Connection refused */
+#define EREMOTERELEASE 240 /* Remote peer released connection */
+#define EHOSTDOWN 241 /* Host is down */
+#define EHOSTUNREACH 242 /* No route to host */
+
+#define EALREADY 244 /* Operation already in progress */
+#define EINPROGRESS 245 /* Operation now in progress */
+#define EWOULDBLOCK 246 /* Operation would block (Linux returns EAGAIN) */
+#define ENOTEMPTY 247 /* Directory not empty */
+#define ENAMETOOLONG 248 /* File name too long */
+#define ELOOP 249 /* Too many symbolic links encountered */
+#define ENOSYS 251 /* Function not implemented */
+
+#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */
+#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */
+#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */
+
+/* for robust mutexes */
+#define EOWNERDEAD 254 /* Owner died */
+#define ENOTRECOVERABLE 255 /* State not recoverable */
+
+#define ERFKILL 256 /* Operation not possible due to RF-kill */
+
+#define EHWPOISON 257 /* Memory page has hardware error */
+
+#endif
--- /dev/null
+#ifndef _PARISC_FCNTL_H
+#define _PARISC_FCNTL_H
+
+#define O_APPEND 000000010
+#define O_BLKSEEK 000000100 /* HPUX only */
+#define O_CREAT 000000400 /* not fcntl */
+#define O_EXCL 000002000 /* not fcntl */
+#define O_LARGEFILE 000004000
+#define __O_SYNC 000100000
+#define O_SYNC (__O_SYNC|O_DSYNC)
+#define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */
+#define O_NOCTTY 000400000 /* not fcntl */
+#define O_DSYNC 001000000 /* HPUX only */
+#define O_RSYNC 002000000 /* HPUX only */
+#define O_NOATIME 004000000
+#define O_CLOEXEC 010000000 /* set close_on_exec */
+
+#define O_DIRECTORY 000010000 /* must be a directory */
+#define O_NOFOLLOW 000000200 /* don't follow links */
+#define O_INVISIBLE 004000000 /* invisible I/O, for DMAPI/XDSM */
+
+#define O_PATH 020000000
+
+#define F_GETLK64 8
+#define F_SETLK64 9
+#define F_SETLKW64 10
+
+#define F_GETOWN 11 /* for sockets. */
+#define F_SETOWN 12 /* for sockets. */
+#define F_SETSIG 13 /* for sockets. */
+#define F_GETSIG 14 /* for sockets. */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK 01
+#define F_WRLCK 02
+#define F_UNLCK 03
+
+#include <asm-generic/fcntl.h>
+
+#endif
--- /dev/null
+/*
+ * Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ * Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org >
+ * portions from "linux/ioctl.h for Linux" by H.H. Bergman.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef _ASM_PARISC_IOCTL_H
+#define _ASM_PARISC_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE 0U
+#define _IOC_WRITE 2U
+#define _IOC_READ 1U
+
+#include <asm-generic/ioctl.h>
+
+#endif /* _ASM_PARISC_IOCTL_H */
--- /dev/null
+#ifndef __ARCH_PARISC_IOCTLS_H__
+#define __ARCH_PARISC_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS _IOR('T', 16, struct termios) /* TCGETATTR */
+#define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */
+#define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */
+#define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */
+#define TCGETA _IOR('T', 1, struct termio)
+#define TCSETA _IOW('T', 2, struct termio)
+#define TCSETAW _IOW('T', 3, struct termio)
+#define TCSETAF _IOW('T', 4, struct termio)
+#define TCSBRK _IO('T', 5)
+#define TCXONC _IO('T', 6)
+#define TCFLSH _IO('T', 7)
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP _IOR('T', 30, int)
+#define TIOCSPGRP _IOW('T', 29, int)
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
+#define TIOCVHANGUP 0x5437
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define FIOQSIZE 0x5460 /* Get exact space used by quota */
+
+#define TIOCSTART 0x5461
+#define TIOCSTOP 0x5462
+#define TIOCSLTC 0x5462
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_PARISC_IOCTLS_H */
--- /dev/null
+#ifndef __PARISC_IPCBUF_H__
+#define __PARISC_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for PA-RISC is almost identical to
+ * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel.
+ * 'seq' has been changed from long to int so that it's the same size
+ * on 64-bit kernels as on 32-bit ones.
+ */
+
+struct ipc64_perm
+{
+ key_t key;
+ uid_t uid;
+ gid_t gid;
+ uid_t cuid;
+ gid_t cgid;
+ unsigned short int __pad1;
+ mode_t mode;
+ unsigned short int __pad2;
+ unsigned short int seq;
+ unsigned int __pad3;
+ unsigned long long int __unused1;
+ unsigned long long int __unused2;
+};
+
+#endif /* __PARISC_IPCBUF_H__ */
--- /dev/null
+#ifndef __PARISC_MMAN_H__
+#define __PARISC_MMAN_H__
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x03 /* Mask for type of mapping */
+#define MAP_FIXED 0x04 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x10 /* don't use a file */
+
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_GROWSDOWN 0x8000 /* stack-like segment */
+#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x20000 /* do not block on IO */
+#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB 0x80000 /* create a huge page mapping */
+
+#define MS_SYNC 1 /* synchronous memory sync */
+#define MS_ASYNC 2 /* sync memory asynchronously */
+#define MS_INVALIDATE 4 /* invalidate the caches */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#define MADV_NORMAL 0 /* no further special treatment */
+#define MADV_RANDOM 1 /* expect random page references */
+#define MADV_SEQUENTIAL 2 /* expect sequential page references */
+#define MADV_WILLNEED 3 /* will need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
+#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */
+#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */
+#define MADV_VPS_INHERIT 7 /* Inherit parents page size */
+
+/* common/generic parameters */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
+
+/* The range 12-64 is reserved for page size specification. */
+#define MADV_4K_PAGES 12 /* Use 4K pages */
+#define MADV_16K_PAGES 14 /* Use 16K pages */
+#define MADV_64K_PAGES 16 /* Use 64K pages */
+#define MADV_256K_PAGES 18 /* Use 256K pages */
+#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */
+#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */
+#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */
+#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */
+
+#define MADV_MERGEABLE 65 /* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE 67 /* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE 68 /* Not worth backing with hugepages */
+
+#define MADV_DONTDUMP 69 /* Explicity exclude from the core dump,
+ overrides the coredump filter bits */
+#define MADV_DODUMP 70 /* Clear the MADV_NODUMP flag */
+
+/* compatibility flags */
+#define MAP_FILE 0
+#define MAP_VARIABLE 0
+
+#endif /* __PARISC_MMAN_H__ */
--- /dev/null
+#ifndef _PARISC_MSGBUF_H
+#define _PARISC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for parisc architecture, copied from sparc.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+#ifndef CONFIG_64BIT
+ unsigned int __pad1;
+#endif
+ __kernel_time_t msg_stime; /* last msgsnd time */
+#ifndef CONFIG_64BIT
+ unsigned int __pad2;
+#endif
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+#ifndef CONFIG_64BIT
+ unsigned int __pad3;
+#endif
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned int msg_cbytes; /* current number of bytes on queue */
+ unsigned int msg_qnum; /* number of messages in queue */
+ unsigned int msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned int __unused1;
+ unsigned int __unused2;
+};
+
+#endif /* _PARISC_MSGBUF_H */
--- /dev/null
+#ifndef _UAPI_PARISC_PDC_H
+#define _UAPI_PARISC_PDC_H
+
+/*
+ * PDC return values ...
+ * All PDC calls return a subset of these errors.
+ */
+
+#define PDC_WARN 3 /* Call completed with a warning */
+#define PDC_REQ_ERR_1 2 /* See above */
+#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
+#define PDC_OK 0 /* Call completed successfully */
+#define PDC_BAD_PROC -1 /* Called non-existent procedure*/
+#define PDC_BAD_OPTION -2 /* Called with non-existent option */
+#define PDC_ERROR -3 /* Call could not complete without an error */
+#define PDC_NE_MOD -5 /* Module not found */
+#define PDC_NE_CELL_MOD -7 /* Cell module not found */
+#define PDC_INVALID_ARG -10 /* Called with an invalid argument */
+#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
+#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
+
+/*
+ * PDC entry points...
+ */
+
+#define PDC_POW_FAIL 1 /* perform a power-fail */
+#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */
+
+#define PDC_CHASSIS 2 /* PDC-chassis functions */
+#define PDC_CHASSIS_DISP 0 /* update chassis display */
+#define PDC_CHASSIS_WARN 1 /* return chassis warnings */
+#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
+#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */
+
+#define PDC_PIM 3 /* Get PIM data */
+#define PDC_PIM_HPMC 0 /* Transfer HPMC data */
+#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
+#define PDC_PIM_LPMC 2 /* Transfer HPMC data */
+#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
+#define PDC_PIM_TOC 4 /* Transfer TOC data */
+
+#define PDC_MODEL 4 /* PDC model information call */
+#define PDC_MODEL_INFO 0 /* returns information */
+#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
+#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
+#define PDC_MODEL_SYSMODEL 3 /* return system model info */
+#define PDC_MODEL_ENSPEC 4 /* enable specific option */
+#define PDC_MODEL_DISPEC 5 /* disable specific option */
+#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
+#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
+#define PDC_MODEL_OS64 (1 << 0)
+#define PDC_MODEL_OS32 (1 << 1)
+#define PDC_MODEL_IOPDIR_FDC (1 << 2)
+#define PDC_MODEL_NVA_MASK (3 << 4)
+#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
+#define PDC_MODEL_NVA_SLOW (1 << 4)
+#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
+#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
+#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
+
+#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */
+#define PA90_INSTRUCTION_SET 0x8
+
+#define PDC_CACHE 5 /* return/set cache (& TLB) info*/
+#define PDC_CACHE_INFO 0 /* returns information */
+#define PDC_CACHE_SET_COH 1 /* set coherence state */
+#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */
+
+#define PDC_HPA 6 /* return HPA of processor */
+#define PDC_HPA_PROCESSOR 0
+#define PDC_HPA_MODULES 1
+
+#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
+#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */
+
+#define PDC_IODC 8 /* talk to IODC */
+#define PDC_IODC_READ 0 /* read IODC entry point */
+/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
+#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
+/* 1, 2 obsolete - HVERSION dependent*/
+#define PDC_IODC_RI_INIT 3 /* Initialize module */
+#define PDC_IODC_RI_IO 4 /* Module input/output */
+#define PDC_IODC_RI_SPA 5 /* Module input/output */
+#define PDC_IODC_RI_CONFIG 6 /* Module input/output */
+/* 7 obsolete - HVERSION dependent */
+#define PDC_IODC_RI_TEST 8 /* Module input/output */
+#define PDC_IODC_RI_TLB 9 /* Module input/output */
+#define PDC_IODC_NINIT 2 /* non-destructive init */
+#define PDC_IODC_DINIT 3 /* destructive init */
+#define PDC_IODC_MEMERR 4 /* check for memory errors */
+#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
+#define PDC_IODC_BUS_ERROR -4 /* bus error return value */
+#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
+#define PDC_IODC_COUNT -6 /* count is too small */
+
+#define PDC_TOD 9 /* time-of-day clock (TOD) */
+#define PDC_TOD_READ 0 /* read TOD */
+#define PDC_TOD_WRITE 1 /* write TOD */
+
+
+#define PDC_STABLE 10 /* stable storage (sprockets) */
+#define PDC_STABLE_READ 0
+#define PDC_STABLE_WRITE 1
+#define PDC_STABLE_RETURN_SIZE 2
+#define PDC_STABLE_VERIFY_CONTENTS 3
+#define PDC_STABLE_INITIALIZE 4
+
+#define PDC_NVOLATILE 11 /* often not implemented */
+
+#define PDC_ADD_VALID 12 /* Memory validation PDC call */
+#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */
+
+#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */
+
+#define PDC_PROC 16 /* (sprockets) */
+
+#define PDC_CONFIG 16 /* (sprockets) */
+#define PDC_CONFIG_DECONFIG 0
+#define PDC_CONFIG_DRECONFIG 1
+#define PDC_CONFIG_DRETURN_CONFIG 2
+
+#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
+#define PDC_BTLB_INFO 0 /* returns parameter */
+#define PDC_BTLB_INSERT 1 /* insert BTLB entry */
+#define PDC_BTLB_PURGE 2 /* purge BTLB entries */
+#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */
+
+#define PDC_TLB 19 /* manage hardware TLB miss handling */
+#define PDC_TLB_INFO 0 /* returns parameter */
+#define PDC_TLB_SETUP 1 /* set up miss handling */
+
+#define PDC_MEM 20 /* Manage memory */
+#define PDC_MEM_MEMINFO 0
+#define PDC_MEM_ADD_PAGE 1
+#define PDC_MEM_CLEAR_PDT 2
+#define PDC_MEM_READ_PDT 3
+#define PDC_MEM_RESET_CLEAR 4
+#define PDC_MEM_GOODMEM 5
+#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
+#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
+#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
+
+#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
+#define PDC_MEM_RET_DUPLICATE_ENTRY 4
+#define PDC_MEM_RET_BUF_SIZE_SMALL 1
+#define PDC_MEM_RET_PDT_FULL -11
+#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
+
+#define PDC_PSW 21 /* Get/Set default System Mask */
+#define PDC_PSW_MASK 0 /* Return mask */
+#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
+#define PDC_PSW_SET_DEFAULTS 2 /* Set default */
+#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
+#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */
+
+#define PDC_SYSTEM_MAP 22 /* find system modules */
+#define PDC_FIND_MODULE 0
+#define PDC_FIND_ADDRESS 1
+#define PDC_TRANSLATE_PATH 2
+
+#define PDC_SOFT_POWER 23 /* soft power switch */
+#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
+#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */
+
+
+/* HVERSION dependent */
+
+/* The PDC_MEM_MAP calls */
+#define PDC_MEM_MAP 128 /* on s700: return page info */
+#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */
+
+#define PDC_EEPROM 129 /* EEPROM access */
+#define PDC_EEPROM_READ_WORD 0
+#define PDC_EEPROM_WRITE_WORD 1
+#define PDC_EEPROM_READ_BYTE 2
+#define PDC_EEPROM_WRITE_BYTE 3
+#define PDC_EEPROM_EEPROM_PASSWORD -1000
+
+#define PDC_NVM 130 /* NVM (non-volatile memory) access */
+#define PDC_NVM_READ_WORD 0
+#define PDC_NVM_WRITE_WORD 1
+#define PDC_NVM_READ_BYTE 2
+#define PDC_NVM_WRITE_BYTE 3
+
+#define PDC_SEED_ERROR 132 /* (sprockets) */
+
+#define PDC_IO 135 /* log error info, reset IO system */
+#define PDC_IO_READ_AND_CLEAR_ERRORS 0
+#define PDC_IO_RESET 1
+#define PDC_IO_RESET_DEVICES 2
+/* sets bits 6&7 (little endian) of the HcControl Register */
+#define PDC_IO_USB_SUSPEND 0xC000000000000000
+#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
+#define PDC_IO_NO_SUSPEND -6 /* return value */
+
+#define PDC_BROADCAST_RESET 136 /* reset all processors */
+#define PDC_DO_RESET 0 /* option: perform a broadcast reset */
+#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
+#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
+#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */
+
+#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
+#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */
+
+#define PDC_LAN_STATION_ID_SIZE 6
+
+#define PDC_CHECK_RANGES 139 /* (sprockets) */
+
+#define PDC_NV_SECTIONS 141 /* (sprockets) */
+
+#define PDC_PERFORMANCE 142 /* performance monitoring */
+
+#define PDC_SYSTEM_INFO 143 /* system information */
+#define PDC_SYSINFO_RETURN_INFO_SIZE 0
+#define PDC_SYSINFO_RRETURN_SYS_INFO 1
+#define PDC_SYSINFO_RRETURN_ERRORS 2
+#define PDC_SYSINFO_RRETURN_WARNINGS 3
+#define PDC_SYSINFO_RETURN_REVISIONS 4
+#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
+#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
+
+#define PDC_RDR 144 /* (sprockets) */
+#define PDC_RDR_READ_BUFFER 0
+#define PDC_RDR_READ_SINGLE 1
+#define PDC_RDR_WRITE_SINGLE 2
+
+#define PDC_INTRIGUE 145 /* (sprockets) */
+#define PDC_INTRIGUE_WRITE_BUFFER 0
+#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
+#define PDC_INTRIGUE_START_CPU_COUNTERS 2
+#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
+
+#define PDC_STI 146 /* STI access */
+/* same as PDC_PCI_XXX values (see below) */
+
+/* Legacy PDC definitions for same stuff */
+#define PDC_PCI_INDEX 147
+#define PDC_PCI_INTERFACE_INFO 0
+#define PDC_PCI_SLOT_INFO 1
+#define PDC_PCI_INFLIGHT_BYTES 2
+#define PDC_PCI_READ_CONFIG 3
+#define PDC_PCI_WRITE_CONFIG 4
+#define PDC_PCI_READ_PCI_IO 5
+#define PDC_PCI_WRITE_PCI_IO 6
+#define PDC_PCI_READ_CONFIG_DELAY 7
+#define PDC_PCI_UPDATE_CONFIG_DELAY 8
+#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
+#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
+#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
+#define PDC_PCI_PCI_RESERVED 12
+#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
+#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
+#define PDC_PCI_PCI_INT_ROUTE 14
+#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
+#define PDC_PCI_READ_MON_TYPE 15
+#define PDC_PCI_WRITE_MON_TYPE 16
+
+
+/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
+#define PDC_INITIATOR 163
+#define PDC_GET_INITIATOR 0
+#define PDC_SET_INITIATOR 1
+#define PDC_DELETE_INITIATOR 2
+#define PDC_RETURN_TABLE_SIZE 3
+#define PDC_RETURN_TABLE 4
+
+#define PDC_LINK 165 /* (sprockets) */
+#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
+#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
+
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define CL_NULL 0 /* invalid */
+#define CL_RANDOM 1 /* random access (as disk) */
+#define CL_SEQU 2 /* sequential access (as tape) */
+#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
+#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
+#define CL_DISPL 9 /* half-duplex console (display) */
+#define CL_FC 10 /* FiberChannel access media */
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST 2
+#define ENTRY_INIT_SRCH_NEXT 3
+#define ENTRY_INIT_MOD_DEV 4
+#define ENTRY_INIT_DEV 5
+#define ENTRY_INIT_MOD 6
+#define ENTRY_INIT_MSG 9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN 0
+#define ENTRY_IO_BOOTOUT 1
+#define ENTRY_IO_CIN 2
+#define ENTRY_IO_COUT 3
+#define ENTRY_IO_CLOSE 4
+#define ENTRY_IO_GETMSG 9
+#define ENTRY_IO_BBLOCK_IN 16
+#define ENTRY_IO_BBLOCK_OUT 17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
+
+/* constants for OS (NVM...) */
+#define OS_ID_NONE 0 /* Undefined OS ID */
+#define OS_ID_HPUX 1 /* HP-UX OS */
+#define OS_ID_MPEXL 2 /* MPE XL OS */
+#define OS_ID_OSF 3 /* OSF OS */
+#define OS_ID_HPRT 4 /* HP-RT OS */
+#define OS_ID_NOVEL 5 /* NOVELL OS */
+#define OS_ID_LINUX 6 /* Linux */
+
+
+/* constants for PDC_CHASSIS */
+#define OSTAT_OFF 0
+#define OSTAT_FLT 1
+#define OSTAT_TEST 2
+#define OSTAT_INIT 3
+#define OSTAT_SHUT 4
+#define OSTAT_WARN 5
+#define OSTAT_RUN 6
+#define OSTAT_ON 7
+
+/* Page Zero constant offsets used by the HPMC handler */
+#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+/* size of the pdc_result buffer for firmware.c */
+#define NUM_PDC_RESULT 32
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/types.h>
+
+
+/* flags of the device_path */
+#define PF_AUTOBOOT 0x80
+#define PF_AUTOSEARCH 0x40
+#define PF_TIMER 0x0F
+
+struct device_path { /* page 1-69 */
+ unsigned char flags; /* flags see above! */
+ unsigned char bc[6]; /* bus converter routing info */
+ unsigned char mod;
+ unsigned int layers[6];/* device-specific layer-info */
+} __attribute__((aligned(8))) ;
+
+struct pz_device {
+ struct device_path dp; /* see above */
+ /* struct iomod *hpa; */
+ unsigned int hpa; /* HPA base address */
+ /* char *spa; */
+ unsigned int spa; /* SPA base address */
+ /* int (*iodc_io)(struct iomod*, ...); */
+ unsigned int iodc_io; /* device entry point */
+ short pad; /* reserved */
+ unsigned short cl_class;/* see below */
+} __attribute__((aligned(8))) ;
+
+struct zeropage {
+ /* [0x000] initialize vectors (VEC) */
+ unsigned int vec_special; /* must be zero */
+ /* int (*vec_pow_fail)(void);*/
+ unsigned int vec_pow_fail; /* power failure handler */
+ /* int (*vec_toc)(void); */
+ unsigned int vec_toc;
+ unsigned int vec_toclen;
+ /* int (*vec_rendz)(void); */
+ unsigned int vec_rendz;
+ int vec_pow_fail_flen;
+ int vec_pad[10];
+
+ /* [0x040] reserved processor dependent */
+ int pad0[112];
+
+ /* [0x200] reserved */
+ int pad1[84];
+
+ /* [0x350] memory configuration (MC) */
+ int memc_cont; /* contiguous mem size (bytes) */
+ int memc_phsize; /* physical memory size */
+ int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
+ unsigned int mem_pdc_hi; /* used for 64-bit */
+
+ /* [0x360] various parameters for the boot-CPU */
+ /* unsigned int *mem_booterr[8]; */
+ unsigned int mem_booterr[8]; /* ptr to boot errors */
+ unsigned int mem_free; /* first location, where OS can be loaded */
+ /* struct iomod *mem_hpa; */
+ unsigned int mem_hpa; /* HPA of the boot-CPU */
+ /* int (*mem_pdc)(int, ...); */
+ unsigned int mem_pdc; /* PDC entry point */
+ unsigned int mem_10msec; /* number of clock ticks in 10msec */
+
+ /* [0x390] initial memory module (IMM) */
+ /* struct iomod *imm_hpa; */
+ unsigned int imm_hpa; /* HPA of the IMM */
+ int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
+ unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
+ unsigned int imm_max_mem; /* bytes of mem in IMM */
+
+ /* [0x3A0] boot console, display device and keyboard */
+ struct pz_device mem_cons; /* description of console device */
+ struct pz_device mem_boot; /* description of boot device */
+ struct pz_device mem_kbd; /* description of keyboard device */
+
+ /* [0x430] reserved */
+ int pad430[116];
+
+ /* [0x600] processor dependent */
+ __u32 pad600[1];
+ __u32 proc_sti; /* pointer to STI ROM */
+ __u32 pad608[126];
+};
+
+#endif /* !defined(__ASSEMBLY__) */
+
+#endif /* _UAPI_PARISC_PDC_H */
--- /dev/null
+#ifndef __ARCH_PARISC_POSIX_TYPES_H
+#define __ARCH_PARISC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short __kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+typedef unsigned short __kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
+typedef int __kernel_suseconds_t;
+#define __kernel_suseconds_t __kernel_suseconds_t
+
+typedef long long __kernel_off64_t;
+typedef unsigned long long __kernel_ino64_t;
+
+#include <asm-generic/posix_types.h>
+
+#endif
--- /dev/null
+/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg
+** Copyright (C) 2000 Grant Grundler, Hewlett-Packard
+*/
+#ifndef _UAPI_PARISC_PTRACE_H
+#define _UAPI_PARISC_PTRACE_H
+
+
+#include <linux/types.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call.
+ *
+ * N.B. gdb/strace care about the size and offsets within this
+ * structure. If you change things, you may break object compatibility
+ * for those applications.
+ */
+
+struct pt_regs {
+ unsigned long gr[32]; /* PSW is in gr[0] */
+ __u64 fr[32];
+ unsigned long sr[ 8];
+ unsigned long iasq[2];
+ unsigned long iaoq[2];
+ unsigned long cr27;
+ unsigned long pad0; /* available for other uses */
+ unsigned long orig_r28;
+ unsigned long ksp;
+ unsigned long kpc;
+ unsigned long sar; /* CR11 */
+ unsigned long iir; /* CR19 */
+ unsigned long isr; /* CR20 */
+ unsigned long ior; /* CR21 */
+ unsigned long ipsw; /* CR22 */
+};
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ *
+ * These ones are taken from IA-64 on the assumption that theirs are
+ * the most correct (and we also want to support PTRACE_SINGLEBLOCK
+ * since we have taken branch traps too)
+ */
+#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */
+
+
+#endif /* _UAPI_PARISC_PTRACE_H */
--- /dev/null
+#ifndef _ASM_PARISC_RESOURCE_H
+#define _ASM_PARISC_RESOURCE_H
+
+#define _STK_LIM_MAX 10 * _STK_LIM
+#include <asm-generic/resource.h>
+
+#endif
--- /dev/null
+#ifndef _PARISC_SEMBUF_H
+#define _PARISC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for parisc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+#ifndef CONFIG_64BIT
+ unsigned int __pad1;
+#endif
+ __kernel_time_t sem_otime; /* last semop time */
+#ifndef CONFIG_64BIT
+ unsigned int __pad2;
+#endif
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned int sem_nsems; /* no. of semaphores in array */
+ unsigned int __unused1;
+ unsigned int __unused2;
+};
+
+#endif /* _PARISC_SEMBUF_H */
--- /dev/null
+#ifndef _PARISC_SETUP_H
+#define _PARISC_SETUP_H
+
+#define COMMAND_LINE_SIZE 1024
+
+#endif /* _PARISC_SETUP_H */
--- /dev/null
+#ifndef _PARISC_SHMBUF_H
+#define _PARISC_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for parisc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+#ifndef CONFIG_64BIT
+ unsigned int __pad1;
+#endif
+ __kernel_time_t shm_atime; /* last attach time */
+#ifndef CONFIG_64BIT
+ unsigned int __pad2;
+#endif
+ __kernel_time_t shm_dtime; /* last detach time */
+#ifndef CONFIG_64BIT
+ unsigned int __pad3;
+#endif
+ __kernel_time_t shm_ctime; /* last change time */
+#ifndef CONFIG_64BIT
+ unsigned int __pad4;
+#endif
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned int shm_nattch; /* no. of current attaches */
+ unsigned int __unused1;
+ unsigned int __unused2;
+};
+
+#ifdef CONFIG_64BIT
+/* The 'unsigned int' (formerly 'unsigned long') data types below will
+ * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on
+ * a wide kernel, but if some of these values are meant to contain pointers
+ * they may need to be 'long long' instead. -PB XXX FIXME
+ */
+#endif
+struct shminfo64 {
+ unsigned int shmmax;
+ unsigned int shmmin;
+ unsigned int shmmni;
+ unsigned int shmseg;
+ unsigned int shmall;
+ unsigned int __unused1;
+ unsigned int __unused2;
+ unsigned int __unused3;
+ unsigned int __unused4;
+};
+
+#endif /* _PARISC_SHMBUF_H */
--- /dev/null
+#ifndef _ASMPARISC_SIGCONTEXT_H
+#define _ASMPARISC_SIGCONTEXT_H
+
+#define PARISC_SC_FLAG_ONSTACK 1<<0
+#define PARISC_SC_FLAG_IN_SYSCALL 1<<1
+
+/* We will add more stuff here as it becomes necessary, until we know
+ it works. */
+struct sigcontext {
+ unsigned long sc_flags;
+
+ unsigned long sc_gr[32]; /* PSW in sc_gr[0] */
+ unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */
+ unsigned long sc_iasq[2];
+ unsigned long sc_iaoq[2];
+ unsigned long sc_sar; /* cr11 */
+};
+
+
+#endif
--- /dev/null
+#ifndef _PARISC_SIGINFO_H
+#define _PARISC_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#undef NSIGTRAP
+#define NSIGTRAP 4
+
+#endif
--- /dev/null
+#ifndef _UAPI_ASM_PARISC_SIGNAL_H
+#define _UAPI_ASM_PARISC_SIGNAL_H
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGEMT 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGBUS 10
+#define SIGSEGV 11
+#define SIGSYS 12 /* Linux doesn't use this */
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGUSR1 16
+#define SIGUSR2 17
+#define SIGCHLD 18
+#define SIGPWR 19
+#define SIGVTALRM 20
+#define SIGPROF 21
+#define SIGIO 22
+#define SIGPOLL SIGIO
+#define SIGWINCH 23
+#define SIGSTOP 24
+#define SIGTSTP 25
+#define SIGCONT 26
+#define SIGTTIN 27
+#define SIGTTOU 28
+#define SIGURG 29
+#define SIGLOST 30 /* Linux doesn't use this either */
+#define SIGUNUSED 31
+#define SIGRESERVE SIGUNUSED
+
+#define SIGXCPU 33
+#define SIGXFSZ 34
+#define SIGSTKFLT 36
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 37
+#define SIGRTMAX _NSIG /* it's 44 under HP/UX */
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK 0x00000001
+#define SA_RESETHAND 0x00000004
+#define SA_NOCLDSTOP 0x00000008
+#define SA_SIGINFO 0x00000010
+#define SA_NODEFER 0x00000020
+#define SA_RESTART 0x00000040
+#define SA_NOCLDWAIT 0x00000080
+#define _SA_SIGGFAULT 0x00000100 /* HPUX */
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000 /* obsolete -- ignored */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+# ifndef __ASSEMBLY__
+
+# include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+/* Type of a signal handler. */
+#ifdef CONFIG_64BIT
+/* function pointers on 64-bit parisc are pointers to little structs and the
+ * compiler doesn't support code which changes or tests the address of
+ * the function in the little struct. This is really ugly -PB
+ */
+typedef char __user *__sighandler_t;
+#else
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+#endif
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#endif /* !__ASSEMBLY */
+#endif /* _UAPI_ASM_PARISC_SIGNAL_H */
--- /dev/null
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 0xffff
+
+#define SO_DEBUG 0x0001
+#define SO_REUSEADDR 0x0004
+#define SO_KEEPALIVE 0x0008
+#define SO_DONTROUTE 0x0010
+#define SO_BROADCAST 0x0020
+#define SO_LINGER 0x0080
+#define SO_OOBINLINE 0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_SNDBUF 0x1001
+#define SO_RCVBUF 0x1002
+#define SO_SNDBUFFORCE 0x100a
+#define SO_RCVBUFFORCE 0x100b
+#define SO_SNDLOWAT 0x1003
+#define SO_RCVLOWAT 0x1004
+#define SO_SNDTIMEO 0x1005
+#define SO_RCVTIMEO 0x1006
+#define SO_ERROR 0x1007
+#define SO_TYPE 0x1008
+#define SO_PROTOCOL 0x1028
+#define SO_DOMAIN 0x1029
+#define SO_PEERNAME 0x2000
+
+#define SO_NO_CHECK 0x400b
+#define SO_PRIORITY 0x400c
+#define SO_BSDCOMPAT 0x400e
+#define SO_PASSCRED 0x4010
+#define SO_PEERCRED 0x4011
+#define SO_TIMESTAMP 0x4012
+#define SCM_TIMESTAMP SO_TIMESTAMP
+#define SO_TIMESTAMPNS 0x4013
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 0x4016
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x4017
+#define SO_SECURITY_ENCRYPTION_NETWORK 0x4018
+
+#define SO_BINDTODEVICE 0x4019
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 0x401a
+#define SO_DETACH_FILTER 0x401b
+
+#define SO_ACCEPTCONN 0x401c
+
+#define SO_PEERSEC 0x401d
+#define SO_PASSSEC 0x401e
+
+#define SO_MARK 0x401f
+
+#define SO_TIMESTAMPING 0x4020
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
+#define SO_RXQ_OVFL 0x4021
+
+#define SO_WIFI_STATUS 0x4022
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+#define SO_PEEK_OFF 0x4023
+
+/* Instruct lower device to use last 4-bytes of skb data as FCS */
+#define SO_NOFCS 0x4024
+
+
+/* O_NONBLOCK clashes with the bits used for socket types. Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK 0x40000000
+
+#endif /* _ASM_SOCKET_H */
--- /dev/null
+#ifndef __ARCH_PARISC_SOCKIOS__
+#define __ARCH_PARISC_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif
--- /dev/null
+#ifndef _PARISC_STAT_H
+#define _PARISC_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+ unsigned int st_dev; /* dev_t is 32 bits on parisc */
+ ino_t st_ino; /* 32 bits */
+ mode_t st_mode; /* 16 bits */
+ unsigned short st_nlink; /* 16 bits */
+ unsigned short st_reserved1; /* old st_uid */
+ unsigned short st_reserved2; /* old st_gid */
+ unsigned int st_rdev;
+ off_t st_size;
+ time_t st_atime;
+ unsigned int st_atime_nsec;
+ time_t st_mtime;
+ unsigned int st_mtime_nsec;
+ time_t st_ctime;
+ unsigned int st_ctime_nsec;
+ int st_blksize;
+ int st_blocks;
+ unsigned int __unused1; /* ACL stuff */
+ unsigned int __unused2; /* network */
+ ino_t __unused3; /* network */
+ unsigned int __unused4; /* cnodes */
+ unsigned short __unused5; /* netsite */
+ short st_fstype;
+ unsigned int st_realdev;
+ unsigned short st_basemode;
+ unsigned short st_spareshort;
+ uid_t st_uid;
+ gid_t st_gid;
+ unsigned int st_spare4[3];
+};
+
+#define STAT_HAVE_NSEC
+
+typedef __kernel_off64_t off64_t;
+
+struct hpux_stat64 {
+ unsigned int st_dev; /* dev_t is 32 bits on parisc */
+ ino_t st_ino; /* 32 bits */
+ mode_t st_mode; /* 16 bits */
+ unsigned short st_nlink; /* 16 bits */
+ unsigned short st_reserved1; /* old st_uid */
+ unsigned short st_reserved2; /* old st_gid */
+ unsigned int st_rdev;
+ off64_t st_size;
+ time_t st_atime;
+ unsigned int st_spare1;
+ time_t st_mtime;
+ unsigned int st_spare2;
+ time_t st_ctime;
+ unsigned int st_spare3;
+ int st_blksize;
+ __u64 st_blocks;
+ unsigned int __unused1; /* ACL stuff */
+ unsigned int __unused2; /* network */
+ ino_t __unused3; /* network */
+ unsigned int __unused4; /* cnodes */
+ unsigned short __unused5; /* netsite */
+ short st_fstype;
+ unsigned int st_realdev;
+ unsigned short st_basemode;
+ unsigned short st_spareshort;
+ uid_t st_uid;
+ gid_t st_gid;
+ unsigned int st_spare4[3];
+};
+
+/* This is the struct that 32-bit userspace applications are expecting.
+ * How 64-bit apps are going to be compiled, I have no idea. But at least
+ * this way, we don't have a wrapper in the kernel.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned int __pad1;
+
+ unsigned int __st_ino; /* Not actually filled in */
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned long long st_rdev;
+ unsigned int __pad2;
+ signed long long st_size;
+ signed int st_blksize;
+
+ signed long long st_blocks;
+ signed int st_atime;
+ unsigned int st_atime_nsec;
+ signed int st_mtime;
+ unsigned int st_mtime_nsec;
+ signed int st_ctime;
+ unsigned int st_ctime_nsec;
+ unsigned long long st_ino;
+};
+
+#endif
--- /dev/null
+#ifndef _PARISC_STATFS_H
+#define _PARISC_STATFS_H
+
+#define __statfs_word long
+#include <asm-generic/statfs.h>
+
+#endif
--- /dev/null
+#ifndef _PARISC_SWAB_H
+#define _PARISC_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+ __asm__("dep %0, 15, 8, %0\n\t" /* deposit 00ab -> 0bab */
+ "shd %%r0, %0, 8, %0" /* shift 000000ab -> 00ba */
+ : "=r" (x)
+ : "0" (x));
+ return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab24(__u32 x)
+{
+ __asm__("shd %0, %0, 8, %0\n\t" /* shift xabcxabc -> cxab */
+ "dep %0, 15, 8, %0\n\t" /* deposit cxab -> cbab */
+ "shd %%r0, %0, 8, %0" /* shift 0000cbab -> 0cba */
+ : "=r" (x)
+ : "0" (x));
+ return x;
+}
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+ unsigned int temp;
+ __asm__("shd %0, %0, 16, %1\n\t" /* shift abcdabcd -> cdab */
+ "dep %1, 15, 8, %1\n\t" /* deposit cdab -> cbab */
+ "shd %0, %1, 8, %0" /* shift abcdcbab -> dcba */
+ : "=r" (x), "=&r" (temp)
+ : "0" (x));
+ return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#if BITS_PER_LONG > 32
+/*
+** From "PA-RISC 2.0 Architecture", HP Professional Books.
+** See Appendix I page 8 , "Endian Byte Swapping".
+**
+** Pretty cool algorithm: (* == zero'd bits)
+** PERMH 01234567 -> 67452301 into %0
+** HSHL 67452301 -> 7*5*3*1* into %1
+** HSHR 67452301 -> *6*4*2*0 into %0
+** OR %0 | %1 -> 76543210 into %0 (all done!)
+*/
+static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
+{
+ __u64 temp;
+ __asm__("permh,3210 %0, %0\n\t"
+ "hshl %0, 8, %1\n\t"
+ "hshr,u %0, 8, %0\n\t"
+ "or %1, %0, %0"
+ : "=r" (x), "=&r" (temp)
+ : "0" (x));
+ return x;
+}
+#define __arch_swab64 __arch_swab64
+#endif /* BITS_PER_LONG > 32 */
+
+#endif /* _PARISC_SWAB_H */
--- /dev/null
+#ifndef __ARCH_PARISC_TERMBITS_H__
+#define __ARCH_PARISC_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0040000
+#define IUTF8 0100000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+#define EXTPROC 0200000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif
--- /dev/null
+#ifndef _UAPI_PARISC_TERMIOS_H
+#define _UAPI_PARISC_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+
+#endif /* _UAPI_PARISC_TERMIOS_H */
--- /dev/null
+#ifndef _PARISC_TYPES_H
+#define _PARISC_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#endif
--- /dev/null
+#ifndef _UAPI_ASM_PARISC_UNISTD_H_
+#define _UAPI_ASM_PARISC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+/*
+ * HP-UX system calls get their native numbers for binary compatibility.
+ */
+
+#define __NR_HPUX_exit 1
+#define __NR_HPUX_fork 2
+#define __NR_HPUX_read 3
+#define __NR_HPUX_write 4
+#define __NR_HPUX_open 5
+#define __NR_HPUX_close 6
+#define __NR_HPUX_wait 7
+#define __NR_HPUX_creat 8
+#define __NR_HPUX_link 9
+#define __NR_HPUX_unlink 10
+#define __NR_HPUX_execv 11
+#define __NR_HPUX_chdir 12
+#define __NR_HPUX_time 13
+#define __NR_HPUX_mknod 14
+#define __NR_HPUX_chmod 15
+#define __NR_HPUX_chown 16
+#define __NR_HPUX_break 17
+#define __NR_HPUX_lchmod 18
+#define __NR_HPUX_lseek 19
+#define __NR_HPUX_getpid 20
+#define __NR_HPUX_mount 21
+#define __NR_HPUX_umount 22
+#define __NR_HPUX_setuid 23
+#define __NR_HPUX_getuid 24
+#define __NR_HPUX_stime 25
+#define __NR_HPUX_ptrace 26
+#define __NR_HPUX_alarm 27
+#define __NR_HPUX_oldfstat 28
+#define __NR_HPUX_pause 29
+#define __NR_HPUX_utime 30
+#define __NR_HPUX_stty 31
+#define __NR_HPUX_gtty 32
+#define __NR_HPUX_access 33
+#define __NR_HPUX_nice 34
+#define __NR_HPUX_ftime 35
+#define __NR_HPUX_sync 36
+#define __NR_HPUX_kill 37
+#define __NR_HPUX_stat 38
+#define __NR_HPUX_setpgrp3 39
+#define __NR_HPUX_lstat 40
+#define __NR_HPUX_dup 41
+#define __NR_HPUX_pipe 42
+#define __NR_HPUX_times 43
+#define __NR_HPUX_profil 44
+#define __NR_HPUX_ki_call 45
+#define __NR_HPUX_setgid 46
+#define __NR_HPUX_getgid 47
+#define __NR_HPUX_sigsys 48
+#define __NR_HPUX_reserved1 49
+#define __NR_HPUX_reserved2 50
+#define __NR_HPUX_acct 51
+#define __NR_HPUX_set_userthreadid 52
+#define __NR_HPUX_oldlock 53
+#define __NR_HPUX_ioctl 54
+#define __NR_HPUX_reboot 55
+#define __NR_HPUX_symlink 56
+#define __NR_HPUX_utssys 57
+#define __NR_HPUX_readlink 58
+#define __NR_HPUX_execve 59
+#define __NR_HPUX_umask 60
+#define __NR_HPUX_chroot 61
+#define __NR_HPUX_fcntl 62
+#define __NR_HPUX_ulimit 63
+#define __NR_HPUX_getpagesize 64
+#define __NR_HPUX_mremap 65
+#define __NR_HPUX_vfork 66
+#define __NR_HPUX_vread 67
+#define __NR_HPUX_vwrite 68
+#define __NR_HPUX_sbrk 69
+#define __NR_HPUX_sstk 70
+#define __NR_HPUX_mmap 71
+#define __NR_HPUX_vadvise 72
+#define __NR_HPUX_munmap 73
+#define __NR_HPUX_mprotect 74
+#define __NR_HPUX_madvise 75
+#define __NR_HPUX_vhangup 76
+#define __NR_HPUX_swapoff 77
+#define __NR_HPUX_mincore 78
+#define __NR_HPUX_getgroups 79
+#define __NR_HPUX_setgroups 80
+#define __NR_HPUX_getpgrp2 81
+#define __NR_HPUX_setpgrp2 82
+#define __NR_HPUX_setitimer 83
+#define __NR_HPUX_wait3 84
+#define __NR_HPUX_swapon 85
+#define __NR_HPUX_getitimer 86
+#define __NR_HPUX_gethostname42 87
+#define __NR_HPUX_sethostname42 88
+#define __NR_HPUX_getdtablesize 89
+#define __NR_HPUX_dup2 90
+#define __NR_HPUX_getdopt 91
+#define __NR_HPUX_fstat 92
+#define __NR_HPUX_select 93
+#define __NR_HPUX_setdopt 94
+#define __NR_HPUX_fsync 95
+#define __NR_HPUX_setpriority 96
+#define __NR_HPUX_socket_old 97
+#define __NR_HPUX_connect_old 98
+#define __NR_HPUX_accept_old 99
+#define __NR_HPUX_getpriority 100
+#define __NR_HPUX_send_old 101
+#define __NR_HPUX_recv_old 102
+#define __NR_HPUX_socketaddr_old 103
+#define __NR_HPUX_bind_old 104
+#define __NR_HPUX_setsockopt_old 105
+#define __NR_HPUX_listen_old 106
+#define __NR_HPUX_vtimes_old 107
+#define __NR_HPUX_sigvector 108
+#define __NR_HPUX_sigblock 109
+#define __NR_HPUX_siggetmask 110
+#define __NR_HPUX_sigpause 111
+#define __NR_HPUX_sigstack 112
+#define __NR_HPUX_recvmsg_old 113
+#define __NR_HPUX_sendmsg_old 114
+#define __NR_HPUX_vtrace_old 115
+#define __NR_HPUX_gettimeofday 116
+#define __NR_HPUX_getrusage 117
+#define __NR_HPUX_getsockopt_old 118
+#define __NR_HPUX_resuba_old 119
+#define __NR_HPUX_readv 120
+#define __NR_HPUX_writev 121
+#define __NR_HPUX_settimeofday 122
+#define __NR_HPUX_fchown 123
+#define __NR_HPUX_fchmod 124
+#define __NR_HPUX_recvfrom_old 125
+#define __NR_HPUX_setresuid 126
+#define __NR_HPUX_setresgid 127
+#define __NR_HPUX_rename 128
+#define __NR_HPUX_truncate 129
+#define __NR_HPUX_ftruncate 130
+#define __NR_HPUX_flock_old 131
+#define __NR_HPUX_sysconf 132
+#define __NR_HPUX_sendto_old 133
+#define __NR_HPUX_shutdown_old 134
+#define __NR_HPUX_socketpair_old 135
+#define __NR_HPUX_mkdir 136
+#define __NR_HPUX_rmdir 137
+#define __NR_HPUX_utimes_old 138
+#define __NR_HPUX_sigcleanup_old 139
+#define __NR_HPUX_setcore 140
+#define __NR_HPUX_getpeername_old 141
+#define __NR_HPUX_gethostid 142
+#define __NR_HPUX_sethostid 143
+#define __NR_HPUX_getrlimit 144
+#define __NR_HPUX_setrlimit 145
+#define __NR_HPUX_killpg_old 146
+#define __NR_HPUX_cachectl 147
+#define __NR_HPUX_quotactl 148
+#define __NR_HPUX_get_sysinfo 149
+#define __NR_HPUX_getsockname_old 150
+#define __NR_HPUX_privgrp 151
+#define __NR_HPUX_rtprio 152
+#define __NR_HPUX_plock 153
+#define __NR_HPUX_reserved3 154
+#define __NR_HPUX_lockf 155
+#define __NR_HPUX_semget 156
+#define __NR_HPUX_osemctl 157
+#define __NR_HPUX_semop 158
+#define __NR_HPUX_msgget 159
+#define __NR_HPUX_omsgctl 160
+#define __NR_HPUX_msgsnd 161
+#define __NR_HPUX_msgrecv 162
+#define __NR_HPUX_shmget 163
+#define __NR_HPUX_oshmctl 164
+#define __NR_HPUX_shmat 165
+#define __NR_HPUX_shmdt 166
+#define __NR_HPUX_m68020_advise 167
+/* [168,189] are for Discless/DUX */
+#define __NR_HPUX_csp 168
+#define __NR_HPUX_cluster 169
+#define __NR_HPUX_mkrnod 170
+#define __NR_HPUX_test 171
+#define __NR_HPUX_unsp_open 172
+#define __NR_HPUX_reserved4 173
+#define __NR_HPUX_getcontext_old 174
+#define __NR_HPUX_osetcontext 175
+#define __NR_HPUX_bigio 176
+#define __NR_HPUX_pipenode 177
+#define __NR_HPUX_lsync 178
+#define __NR_HPUX_getmachineid 179
+#define __NR_HPUX_cnodeid 180
+#define __NR_HPUX_cnodes 181
+#define __NR_HPUX_swapclients 182
+#define __NR_HPUX_rmt_process 183
+#define __NR_HPUX_dskless_stats 184
+#define __NR_HPUX_sigprocmask 185
+#define __NR_HPUX_sigpending 186
+#define __NR_HPUX_sigsuspend 187
+#define __NR_HPUX_sigaction 188
+#define __NR_HPUX_reserved5 189
+#define __NR_HPUX_nfssvc 190
+#define __NR_HPUX_getfh 191
+#define __NR_HPUX_getdomainname 192
+#define __NR_HPUX_setdomainname 193
+#define __NR_HPUX_async_daemon 194
+#define __NR_HPUX_getdirentries 195
+#define __NR_HPUX_statfs 196
+#define __NR_HPUX_fstatfs 197
+#define __NR_HPUX_vfsmount 198
+#define __NR_HPUX_reserved6 199
+#define __NR_HPUX_waitpid 200
+/* 201 - 223 missing */
+#define __NR_HPUX_sigsetreturn 224
+#define __NR_HPUX_sigsetstatemask 225
+/* 226 missing */
+#define __NR_HPUX_cs 227
+#define __NR_HPUX_cds 228
+#define __NR_HPUX_set_no_trunc 229
+#define __NR_HPUX_pathconf 230
+#define __NR_HPUX_fpathconf 231
+/* 232, 233 missing */
+#define __NR_HPUX_nfs_fcntl 234
+#define __NR_HPUX_ogetacl 235
+#define __NR_HPUX_ofgetacl 236
+#define __NR_HPUX_osetacl 237
+#define __NR_HPUX_ofsetacl 238
+#define __NR_HPUX_pstat 239
+#define __NR_HPUX_getaudid 240
+#define __NR_HPUX_setaudid 241
+#define __NR_HPUX_getaudproc 242
+#define __NR_HPUX_setaudproc 243
+#define __NR_HPUX_getevent 244
+#define __NR_HPUX_setevent 245
+#define __NR_HPUX_audwrite 246
+#define __NR_HPUX_audswitch 247
+#define __NR_HPUX_audctl 248
+#define __NR_HPUX_ogetaccess 249
+#define __NR_HPUX_fsctl 250
+/* 251 - 258 missing */
+#define __NR_HPUX_swapfs 259
+#define __NR_HPUX_fss 260
+/* 261 - 266 missing */
+#define __NR_HPUX_tsync 267
+#define __NR_HPUX_getnumfds 268
+#define __NR_HPUX_poll 269
+#define __NR_HPUX_getmsg 270
+#define __NR_HPUX_putmsg 271
+#define __NR_HPUX_fchdir 272
+#define __NR_HPUX_getmount_cnt 273
+#define __NR_HPUX_getmount_entry 274
+#define __NR_HPUX_accept 275
+#define __NR_HPUX_bind 276
+#define __NR_HPUX_connect 277
+#define __NR_HPUX_getpeername 278
+#define __NR_HPUX_getsockname 279
+#define __NR_HPUX_getsockopt 280
+#define __NR_HPUX_listen 281
+#define __NR_HPUX_recv 282
+#define __NR_HPUX_recvfrom 283
+#define __NR_HPUX_recvmsg 284
+#define __NR_HPUX_send 285
+#define __NR_HPUX_sendmsg 286
+#define __NR_HPUX_sendto 287
+#define __NR_HPUX_setsockopt 288
+#define __NR_HPUX_shutdown 289
+#define __NR_HPUX_socket 290
+#define __NR_HPUX_socketpair 291
+#define __NR_HPUX_proc_open 292
+#define __NR_HPUX_proc_close 293
+#define __NR_HPUX_proc_send 294
+#define __NR_HPUX_proc_recv 295
+#define __NR_HPUX_proc_sendrecv 296
+#define __NR_HPUX_proc_syscall 297
+/* 298 - 311 missing */
+#define __NR_HPUX_semctl 312
+#define __NR_HPUX_msgctl 313
+#define __NR_HPUX_shmctl 314
+#define __NR_HPUX_mpctl 315
+#define __NR_HPUX_exportfs 316
+#define __NR_HPUX_getpmsg 317
+#define __NR_HPUX_putpmsg 318
+/* 319 missing */
+#define __NR_HPUX_msync 320
+#define __NR_HPUX_msleep 321
+#define __NR_HPUX_mwakeup 322
+#define __NR_HPUX_msem_init 323
+#define __NR_HPUX_msem_remove 324
+#define __NR_HPUX_adjtime 325
+#define __NR_HPUX_kload 326
+#define __NR_HPUX_fattach 327
+#define __NR_HPUX_fdetach 328
+#define __NR_HPUX_serialize 329
+#define __NR_HPUX_statvfs 330
+#define __NR_HPUX_fstatvfs 331
+#define __NR_HPUX_lchown 332
+#define __NR_HPUX_getsid 333
+#define __NR_HPUX_sysfs 334
+/* 335, 336 missing */
+#define __NR_HPUX_sched_setparam 337
+#define __NR_HPUX_sched_getparam 338
+#define __NR_HPUX_sched_setscheduler 339
+#define __NR_HPUX_sched_getscheduler 340
+#define __NR_HPUX_sched_yield 341
+#define __NR_HPUX_sched_get_priority_max 342
+#define __NR_HPUX_sched_get_priority_min 343
+#define __NR_HPUX_sched_rr_get_interval 344
+#define __NR_HPUX_clock_settime 345
+#define __NR_HPUX_clock_gettime 346
+#define __NR_HPUX_clock_getres 347
+#define __NR_HPUX_timer_create 348
+#define __NR_HPUX_timer_delete 349
+#define __NR_HPUX_timer_settime 350
+#define __NR_HPUX_timer_gettime 351
+#define __NR_HPUX_timer_getoverrun 352
+#define __NR_HPUX_nanosleep 353
+#define __NR_HPUX_toolbox 354
+/* 355 missing */
+#define __NR_HPUX_getdents 356
+#define __NR_HPUX_getcontext 357
+#define __NR_HPUX_sysinfo 358
+#define __NR_HPUX_fcntl64 359
+#define __NR_HPUX_ftruncate64 360
+#define __NR_HPUX_fstat64 361
+#define __NR_HPUX_getdirentries64 362
+#define __NR_HPUX_getrlimit64 363
+#define __NR_HPUX_lockf64 364
+#define __NR_HPUX_lseek64 365
+#define __NR_HPUX_lstat64 366
+#define __NR_HPUX_mmap64 367
+#define __NR_HPUX_setrlimit64 368
+#define __NR_HPUX_stat64 369
+#define __NR_HPUX_truncate64 370
+#define __NR_HPUX_ulimit64 371
+#define __NR_HPUX_pread 372
+#define __NR_HPUX_preadv 373
+#define __NR_HPUX_pwrite 374
+#define __NR_HPUX_pwritev 375
+#define __NR_HPUX_pread64 376
+#define __NR_HPUX_preadv64 377
+#define __NR_HPUX_pwrite64 378
+#define __NR_HPUX_pwritev64 379
+#define __NR_HPUX_setcontext 380
+#define __NR_HPUX_sigaltstack 381
+#define __NR_HPUX_waitid 382
+#define __NR_HPUX_setpgrp 383
+#define __NR_HPUX_recvmsg2 384
+#define __NR_HPUX_sendmsg2 385
+#define __NR_HPUX_socket2 386
+#define __NR_HPUX_socketpair2 387
+#define __NR_HPUX_setregid 388
+#define __NR_HPUX_lwp_create 389
+#define __NR_HPUX_lwp_terminate 390
+#define __NR_HPUX_lwp_wait 391
+#define __NR_HPUX_lwp_suspend 392
+#define __NR_HPUX_lwp_resume 393
+/* 394 missing */
+#define __NR_HPUX_lwp_abort_syscall 395
+#define __NR_HPUX_lwp_info 396
+#define __NR_HPUX_lwp_kill 397
+#define __NR_HPUX_ksleep 398
+#define __NR_HPUX_kwakeup 399
+/* 400 missing */
+#define __NR_HPUX_pstat_getlwp 401
+#define __NR_HPUX_lwp_exit 402
+#define __NR_HPUX_lwp_continue 403
+#define __NR_HPUX_getacl 404
+#define __NR_HPUX_fgetacl 405
+#define __NR_HPUX_setacl 406
+#define __NR_HPUX_fsetacl 407
+#define __NR_HPUX_getaccess 408
+#define __NR_HPUX_lwp_mutex_init 409
+#define __NR_HPUX_lwp_mutex_lock_sys 410
+#define __NR_HPUX_lwp_mutex_unlock 411
+#define __NR_HPUX_lwp_cond_init 412
+#define __NR_HPUX_lwp_cond_signal 413
+#define __NR_HPUX_lwp_cond_broadcast 414
+#define __NR_HPUX_lwp_cond_wait_sys 415
+#define __NR_HPUX_lwp_getscheduler 416
+#define __NR_HPUX_lwp_setscheduler 417
+#define __NR_HPUX_lwp_getstate 418
+#define __NR_HPUX_lwp_setstate 419
+#define __NR_HPUX_lwp_detach 420
+#define __NR_HPUX_mlock 421
+#define __NR_HPUX_munlock 422
+#define __NR_HPUX_mlockall 423
+#define __NR_HPUX_munlockall 424
+#define __NR_HPUX_shm_open 425
+#define __NR_HPUX_shm_unlink 426
+#define __NR_HPUX_sigqueue 427
+#define __NR_HPUX_sigwaitinfo 428
+#define __NR_HPUX_sigtimedwait 429
+#define __NR_HPUX_sigwait 430
+#define __NR_HPUX_aio_read 431
+#define __NR_HPUX_aio_write 432
+#define __NR_HPUX_lio_listio 433
+#define __NR_HPUX_aio_error 434
+#define __NR_HPUX_aio_return 435
+#define __NR_HPUX_aio_cancel 436
+#define __NR_HPUX_aio_suspend 437
+#define __NR_HPUX_aio_fsync 438
+#define __NR_HPUX_mq_open 439
+#define __NR_HPUX_mq_close 440
+#define __NR_HPUX_mq_unlink 441
+#define __NR_HPUX_mq_send 442
+#define __NR_HPUX_mq_receive 443
+#define __NR_HPUX_mq_notify 444
+#define __NR_HPUX_mq_setattr 445
+#define __NR_HPUX_mq_getattr 446
+#define __NR_HPUX_ksem_open 447
+#define __NR_HPUX_ksem_unlink 448
+#define __NR_HPUX_ksem_close 449
+#define __NR_HPUX_ksem_post 450
+#define __NR_HPUX_ksem_wait 451
+#define __NR_HPUX_ksem_read 452
+#define __NR_HPUX_ksem_trywait 453
+#define __NR_HPUX_lwp_rwlock_init 454
+#define __NR_HPUX_lwp_rwlock_destroy 455
+#define __NR_HPUX_lwp_rwlock_rdlock_sys 456
+#define __NR_HPUX_lwp_rwlock_wrlock_sys 457
+#define __NR_HPUX_lwp_rwlock_tryrdlock 458
+#define __NR_HPUX_lwp_rwlock_trywrlock 459
+#define __NR_HPUX_lwp_rwlock_unlock 460
+#define __NR_HPUX_ttrace 461
+#define __NR_HPUX_ttrace_wait 462
+#define __NR_HPUX_lf_wire_mem 463
+#define __NR_HPUX_lf_unwire_mem 464
+#define __NR_HPUX_lf_send_pin_map 465
+#define __NR_HPUX_lf_free_buf 466
+#define __NR_HPUX_lf_wait_nq 467
+#define __NR_HPUX_lf_wakeup_conn_q 468
+#define __NR_HPUX_lf_unused 469
+#define __NR_HPUX_lwp_sema_init 470
+#define __NR_HPUX_lwp_sema_post 471
+#define __NR_HPUX_lwp_sema_wait 472
+#define __NR_HPUX_lwp_sema_trywait 473
+#define __NR_HPUX_lwp_sema_destroy 474
+#define __NR_HPUX_statvfs64 475
+#define __NR_HPUX_fstatvfs64 476
+#define __NR_HPUX_msh_register 477
+#define __NR_HPUX_ptrace64 478
+#define __NR_HPUX_sendfile 479
+#define __NR_HPUX_sendpath 480
+#define __NR_HPUX_sendfile64 481
+#define __NR_HPUX_sendpath64 482
+#define __NR_HPUX_modload 483
+#define __NR_HPUX_moduload 484
+#define __NR_HPUX_modpath 485
+#define __NR_HPUX_getksym 486
+#define __NR_HPUX_modadm 487
+#define __NR_HPUX_modstat 488
+#define __NR_HPUX_lwp_detached_exit 489
+#define __NR_HPUX_crashconf 490
+#define __NR_HPUX_siginhibit 491
+#define __NR_HPUX_sigenable 492
+#define __NR_HPUX_spuctl 493
+#define __NR_HPUX_zerokernelsum 494
+#define __NR_HPUX_nfs_kstat 495
+#define __NR_HPUX_aio_read64 496
+#define __NR_HPUX_aio_write64 497
+#define __NR_HPUX_aio_error64 498
+#define __NR_HPUX_aio_return64 499
+#define __NR_HPUX_aio_cancel64 500
+#define __NR_HPUX_aio_suspend64 501
+#define __NR_HPUX_aio_fsync64 502
+#define __NR_HPUX_lio_listio64 503
+#define __NR_HPUX_recv2 504
+#define __NR_HPUX_recvfrom2 505
+#define __NR_HPUX_send2 506
+#define __NR_HPUX_sendto2 507
+#define __NR_HPUX_acl 508
+#define __NR_HPUX___cnx_p2p_ctl 509
+#define __NR_HPUX___cnx_gsched_ctl 510
+#define __NR_HPUX___cnx_pmon_ctl 511
+
+#define __NR_HPUX_syscalls 512
+
+/*
+ * Linux system call numbers.
+ *
+ * Cary Coutant says that we should just use another syscall gateway
+ * page to avoid clashing with the HPUX space, and I think he's right:
+ * it will would keep a branch out of our syscall entry path, at the
+ * very least. If we decide to change it later, we can ``just'' tweak
+ * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be
+ * 1024 or something. Oh, and recompile libc. =)
+ *
+ * 64-bit HPUX binaries get the syscall gateway address passed in a register
+ * from the kernel at startup, which seems a sane strategy.
+ */
+
+#define __NR_Linux 0
+#define __NR_restart_syscall (__NR_Linux + 0)
+#define __NR_exit (__NR_Linux + 1)
+#define __NR_fork (__NR_Linux + 2)
+#define __NR_read (__NR_Linux + 3)
+#define __NR_write (__NR_Linux + 4)
+#define __NR_open (__NR_Linux + 5)
+#define __NR_close (__NR_Linux + 6)
+#define __NR_waitpid (__NR_Linux + 7)
+#define __NR_creat (__NR_Linux + 8)
+#define __NR_link (__NR_Linux + 9)
+#define __NR_unlink (__NR_Linux + 10)
+#define __NR_execve (__NR_Linux + 11)
+#define __NR_chdir (__NR_Linux + 12)
+#define __NR_time (__NR_Linux + 13)
+#define __NR_mknod (__NR_Linux + 14)
+#define __NR_chmod (__NR_Linux + 15)
+#define __NR_lchown (__NR_Linux + 16)
+#define __NR_socket (__NR_Linux + 17)
+#define __NR_stat (__NR_Linux + 18)
+#define __NR_lseek (__NR_Linux + 19)
+#define __NR_getpid (__NR_Linux + 20)
+#define __NR_mount (__NR_Linux + 21)
+#define __NR_bind (__NR_Linux + 22)
+#define __NR_setuid (__NR_Linux + 23)
+#define __NR_getuid (__NR_Linux + 24)
+#define __NR_stime (__NR_Linux + 25)
+#define __NR_ptrace (__NR_Linux + 26)
+#define __NR_alarm (__NR_Linux + 27)
+#define __NR_fstat (__NR_Linux + 28)
+#define __NR_pause (__NR_Linux + 29)
+#define __NR_utime (__NR_Linux + 30)
+#define __NR_connect (__NR_Linux + 31)
+#define __NR_listen (__NR_Linux + 32)
+#define __NR_access (__NR_Linux + 33)
+#define __NR_nice (__NR_Linux + 34)
+#define __NR_accept (__NR_Linux + 35)
+#define __NR_sync (__NR_Linux + 36)
+#define __NR_kill (__NR_Linux + 37)
+#define __NR_rename (__NR_Linux + 38)
+#define __NR_mkdir (__NR_Linux + 39)
+#define __NR_rmdir (__NR_Linux + 40)
+#define __NR_dup (__NR_Linux + 41)
+#define __NR_pipe (__NR_Linux + 42)
+#define __NR_times (__NR_Linux + 43)
+#define __NR_getsockname (__NR_Linux + 44)
+#define __NR_brk (__NR_Linux + 45)
+#define __NR_setgid (__NR_Linux + 46)
+#define __NR_getgid (__NR_Linux + 47)
+#define __NR_signal (__NR_Linux + 48)
+#define __NR_geteuid (__NR_Linux + 49)
+#define __NR_getegid (__NR_Linux + 50)
+#define __NR_acct (__NR_Linux + 51)
+#define __NR_umount2 (__NR_Linux + 52)
+#define __NR_getpeername (__NR_Linux + 53)
+#define __NR_ioctl (__NR_Linux + 54)
+#define __NR_fcntl (__NR_Linux + 55)
+#define __NR_socketpair (__NR_Linux + 56)
+#define __NR_setpgid (__NR_Linux + 57)
+#define __NR_send (__NR_Linux + 58)
+#define __NR_uname (__NR_Linux + 59)
+#define __NR_umask (__NR_Linux + 60)
+#define __NR_chroot (__NR_Linux + 61)
+#define __NR_ustat (__NR_Linux + 62)
+#define __NR_dup2 (__NR_Linux + 63)
+#define __NR_getppid (__NR_Linux + 64)
+#define __NR_getpgrp (__NR_Linux + 65)
+#define __NR_setsid (__NR_Linux + 66)
+#define __NR_pivot_root (__NR_Linux + 67)
+#define __NR_sgetmask (__NR_Linux + 68)
+#define __NR_ssetmask (__NR_Linux + 69)
+#define __NR_setreuid (__NR_Linux + 70)
+#define __NR_setregid (__NR_Linux + 71)
+#define __NR_mincore (__NR_Linux + 72)
+#define __NR_sigpending (__NR_Linux + 73)
+#define __NR_sethostname (__NR_Linux + 74)
+#define __NR_setrlimit (__NR_Linux + 75)
+#define __NR_getrlimit (__NR_Linux + 76)
+#define __NR_getrusage (__NR_Linux + 77)
+#define __NR_gettimeofday (__NR_Linux + 78)
+#define __NR_settimeofday (__NR_Linux + 79)
+#define __NR_getgroups (__NR_Linux + 80)
+#define __NR_setgroups (__NR_Linux + 81)
+#define __NR_sendto (__NR_Linux + 82)
+#define __NR_symlink (__NR_Linux + 83)
+#define __NR_lstat (__NR_Linux + 84)
+#define __NR_readlink (__NR_Linux + 85)
+#define __NR_uselib (__NR_Linux + 86)
+#define __NR_swapon (__NR_Linux + 87)
+#define __NR_reboot (__NR_Linux + 88)
+#define __NR_mmap2 (__NR_Linux + 89)
+#define __NR_mmap (__NR_Linux + 90)
+#define __NR_munmap (__NR_Linux + 91)
+#define __NR_truncate (__NR_Linux + 92)
+#define __NR_ftruncate (__NR_Linux + 93)
+#define __NR_fchmod (__NR_Linux + 94)
+#define __NR_fchown (__NR_Linux + 95)
+#define __NR_getpriority (__NR_Linux + 96)
+#define __NR_setpriority (__NR_Linux + 97)
+#define __NR_recv (__NR_Linux + 98)
+#define __NR_statfs (__NR_Linux + 99)
+#define __NR_fstatfs (__NR_Linux + 100)
+#define __NR_stat64 (__NR_Linux + 101)
+/* #define __NR_socketcall (__NR_Linux + 102) */
+#define __NR_syslog (__NR_Linux + 103)
+#define __NR_setitimer (__NR_Linux + 104)
+#define __NR_getitimer (__NR_Linux + 105)
+#define __NR_capget (__NR_Linux + 106)
+#define __NR_capset (__NR_Linux + 107)
+#define __NR_pread64 (__NR_Linux + 108)
+#define __NR_pwrite64 (__NR_Linux + 109)
+#define __NR_getcwd (__NR_Linux + 110)
+#define __NR_vhangup (__NR_Linux + 111)
+#define __NR_fstat64 (__NR_Linux + 112)
+#define __NR_vfork (__NR_Linux + 113)
+#define __NR_wait4 (__NR_Linux + 114)
+#define __NR_swapoff (__NR_Linux + 115)
+#define __NR_sysinfo (__NR_Linux + 116)
+#define __NR_shutdown (__NR_Linux + 117)
+#define __NR_fsync (__NR_Linux + 118)
+#define __NR_madvise (__NR_Linux + 119)
+#define __NR_clone (__NR_Linux + 120)
+#define __NR_setdomainname (__NR_Linux + 121)
+#define __NR_sendfile (__NR_Linux + 122)
+#define __NR_recvfrom (__NR_Linux + 123)
+#define __NR_adjtimex (__NR_Linux + 124)
+#define __NR_mprotect (__NR_Linux + 125)
+#define __NR_sigprocmask (__NR_Linux + 126)
+#define __NR_create_module (__NR_Linux + 127)
+#define __NR_init_module (__NR_Linux + 128)
+#define __NR_delete_module (__NR_Linux + 129)
+#define __NR_get_kernel_syms (__NR_Linux + 130)
+#define __NR_quotactl (__NR_Linux + 131)
+#define __NR_getpgid (__NR_Linux + 132)
+#define __NR_fchdir (__NR_Linux + 133)
+#define __NR_bdflush (__NR_Linux + 134)
+#define __NR_sysfs (__NR_Linux + 135)
+#define __NR_personality (__NR_Linux + 136)
+#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid (__NR_Linux + 138)
+#define __NR_setfsgid (__NR_Linux + 139)
+#define __NR__llseek (__NR_Linux + 140)
+#define __NR_getdents (__NR_Linux + 141)
+#define __NR__newselect (__NR_Linux + 142)
+#define __NR_flock (__NR_Linux + 143)
+#define __NR_msync (__NR_Linux + 144)
+#define __NR_readv (__NR_Linux + 145)
+#define __NR_writev (__NR_Linux + 146)
+#define __NR_getsid (__NR_Linux + 147)
+#define __NR_fdatasync (__NR_Linux + 148)
+#define __NR__sysctl (__NR_Linux + 149)
+#define __NR_mlock (__NR_Linux + 150)
+#define __NR_munlock (__NR_Linux + 151)
+#define __NR_mlockall (__NR_Linux + 152)
+#define __NR_munlockall (__NR_Linux + 153)
+#define __NR_sched_setparam (__NR_Linux + 154)
+#define __NR_sched_getparam (__NR_Linux + 155)
+#define __NR_sched_setscheduler (__NR_Linux + 156)
+#define __NR_sched_getscheduler (__NR_Linux + 157)
+#define __NR_sched_yield (__NR_Linux + 158)
+#define __NR_sched_get_priority_max (__NR_Linux + 159)
+#define __NR_sched_get_priority_min (__NR_Linux + 160)
+#define __NR_sched_rr_get_interval (__NR_Linux + 161)
+#define __NR_nanosleep (__NR_Linux + 162)
+#define __NR_mremap (__NR_Linux + 163)
+#define __NR_setresuid (__NR_Linux + 164)
+#define __NR_getresuid (__NR_Linux + 165)
+#define __NR_sigaltstack (__NR_Linux + 166)
+#define __NR_query_module (__NR_Linux + 167)
+#define __NR_poll (__NR_Linux + 168)
+#define __NR_nfsservctl (__NR_Linux + 169)
+#define __NR_setresgid (__NR_Linux + 170)
+#define __NR_getresgid (__NR_Linux + 171)
+#define __NR_prctl (__NR_Linux + 172)
+#define __NR_rt_sigreturn (__NR_Linux + 173)
+#define __NR_rt_sigaction (__NR_Linux + 174)
+#define __NR_rt_sigprocmask (__NR_Linux + 175)
+#define __NR_rt_sigpending (__NR_Linux + 176)
+#define __NR_rt_sigtimedwait (__NR_Linux + 177)
+#define __NR_rt_sigqueueinfo (__NR_Linux + 178)
+#define __NR_rt_sigsuspend (__NR_Linux + 179)
+#define __NR_chown (__NR_Linux + 180)
+#define __NR_setsockopt (__NR_Linux + 181)
+#define __NR_getsockopt (__NR_Linux + 182)
+#define __NR_sendmsg (__NR_Linux + 183)
+#define __NR_recvmsg (__NR_Linux + 184)
+#define __NR_semop (__NR_Linux + 185)
+#define __NR_semget (__NR_Linux + 186)
+#define __NR_semctl (__NR_Linux + 187)
+#define __NR_msgsnd (__NR_Linux + 188)
+#define __NR_msgrcv (__NR_Linux + 189)
+#define __NR_msgget (__NR_Linux + 190)
+#define __NR_msgctl (__NR_Linux + 191)
+#define __NR_shmat (__NR_Linux + 192)
+#define __NR_shmdt (__NR_Linux + 193)
+#define __NR_shmget (__NR_Linux + 194)
+#define __NR_shmctl (__NR_Linux + 195)
+
+#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */
+#define __NR_putpmsg (__NR_Linux + 197)
+
+#define __NR_lstat64 (__NR_Linux + 198)
+#define __NR_truncate64 (__NR_Linux + 199)
+#define __NR_ftruncate64 (__NR_Linux + 200)
+#define __NR_getdents64 (__NR_Linux + 201)
+#define __NR_fcntl64 (__NR_Linux + 202)
+#define __NR_attrctl (__NR_Linux + 203)
+#define __NR_acl_get (__NR_Linux + 204)
+#define __NR_acl_set (__NR_Linux + 205)
+#define __NR_gettid (__NR_Linux + 206)
+#define __NR_readahead (__NR_Linux + 207)
+#define __NR_tkill (__NR_Linux + 208)
+#define __NR_sendfile64 (__NR_Linux + 209)
+#define __NR_futex (__NR_Linux + 210)
+#define __NR_sched_setaffinity (__NR_Linux + 211)
+#define __NR_sched_getaffinity (__NR_Linux + 212)
+#define __NR_set_thread_area (__NR_Linux + 213)
+#define __NR_get_thread_area (__NR_Linux + 214)
+#define __NR_io_setup (__NR_Linux + 215)
+#define __NR_io_destroy (__NR_Linux + 216)
+#define __NR_io_getevents (__NR_Linux + 217)
+#define __NR_io_submit (__NR_Linux + 218)
+#define __NR_io_cancel (__NR_Linux + 219)
+#define __NR_alloc_hugepages (__NR_Linux + 220)
+#define __NR_free_hugepages (__NR_Linux + 221)
+#define __NR_exit_group (__NR_Linux + 222)
+#define __NR_lookup_dcookie (__NR_Linux + 223)
+#define __NR_epoll_create (__NR_Linux + 224)
+#define __NR_epoll_ctl (__NR_Linux + 225)
+#define __NR_epoll_wait (__NR_Linux + 226)
+#define __NR_remap_file_pages (__NR_Linux + 227)
+#define __NR_semtimedop (__NR_Linux + 228)
+#define __NR_mq_open (__NR_Linux + 229)
+#define __NR_mq_unlink (__NR_Linux + 230)
+#define __NR_mq_timedsend (__NR_Linux + 231)
+#define __NR_mq_timedreceive (__NR_Linux + 232)
+#define __NR_mq_notify (__NR_Linux + 233)
+#define __NR_mq_getsetattr (__NR_Linux + 234)
+#define __NR_waitid (__NR_Linux + 235)
+#define __NR_fadvise64_64 (__NR_Linux + 236)
+#define __NR_set_tid_address (__NR_Linux + 237)
+#define __NR_setxattr (__NR_Linux + 238)
+#define __NR_lsetxattr (__NR_Linux + 239)
+#define __NR_fsetxattr (__NR_Linux + 240)
+#define __NR_getxattr (__NR_Linux + 241)
+#define __NR_lgetxattr (__NR_Linux + 242)
+#define __NR_fgetxattr (__NR_Linux + 243)
+#define __NR_listxattr (__NR_Linux + 244)
+#define __NR_llistxattr (__NR_Linux + 245)
+#define __NR_flistxattr (__NR_Linux + 246)
+#define __NR_removexattr (__NR_Linux + 247)
+#define __NR_lremovexattr (__NR_Linux + 248)
+#define __NR_fremovexattr (__NR_Linux + 249)
+#define __NR_timer_create (__NR_Linux + 250)
+#define __NR_timer_settime (__NR_Linux + 251)
+#define __NR_timer_gettime (__NR_Linux + 252)
+#define __NR_timer_getoverrun (__NR_Linux + 253)
+#define __NR_timer_delete (__NR_Linux + 254)
+#define __NR_clock_settime (__NR_Linux + 255)
+#define __NR_clock_gettime (__NR_Linux + 256)
+#define __NR_clock_getres (__NR_Linux + 257)
+#define __NR_clock_nanosleep (__NR_Linux + 258)
+#define __NR_tgkill (__NR_Linux + 259)
+#define __NR_mbind (__NR_Linux + 260)
+#define __NR_get_mempolicy (__NR_Linux + 261)
+#define __NR_set_mempolicy (__NR_Linux + 262)
+#define __NR_vserver (__NR_Linux + 263)
+#define __NR_add_key (__NR_Linux + 264)
+#define __NR_request_key (__NR_Linux + 265)
+#define __NR_keyctl (__NR_Linux + 266)
+#define __NR_ioprio_set (__NR_Linux + 267)
+#define __NR_ioprio_get (__NR_Linux + 268)
+#define __NR_inotify_init (__NR_Linux + 269)
+#define __NR_inotify_add_watch (__NR_Linux + 270)
+#define __NR_inotify_rm_watch (__NR_Linux + 271)
+#define __NR_migrate_pages (__NR_Linux + 272)
+#define __NR_pselect6 (__NR_Linux + 273)
+#define __NR_ppoll (__NR_Linux + 274)
+#define __NR_openat (__NR_Linux + 275)
+#define __NR_mkdirat (__NR_Linux + 276)
+#define __NR_mknodat (__NR_Linux + 277)
+#define __NR_fchownat (__NR_Linux + 278)
+#define __NR_futimesat (__NR_Linux + 279)
+#define __NR_fstatat64 (__NR_Linux + 280)
+#define __NR_unlinkat (__NR_Linux + 281)
+#define __NR_renameat (__NR_Linux + 282)
+#define __NR_linkat (__NR_Linux + 283)
+#define __NR_symlinkat (__NR_Linux + 284)
+#define __NR_readlinkat (__NR_Linux + 285)
+#define __NR_fchmodat (__NR_Linux + 286)
+#define __NR_faccessat (__NR_Linux + 287)
+#define __NR_unshare (__NR_Linux + 288)
+#define __NR_set_robust_list (__NR_Linux + 289)
+#define __NR_get_robust_list (__NR_Linux + 290)
+#define __NR_splice (__NR_Linux + 291)
+#define __NR_sync_file_range (__NR_Linux + 292)
+#define __NR_tee (__NR_Linux + 293)
+#define __NR_vmsplice (__NR_Linux + 294)
+#define __NR_move_pages (__NR_Linux + 295)
+#define __NR_getcpu (__NR_Linux + 296)
+#define __NR_epoll_pwait (__NR_Linux + 297)
+#define __NR_statfs64 (__NR_Linux + 298)
+#define __NR_fstatfs64 (__NR_Linux + 299)
+#define __NR_kexec_load (__NR_Linux + 300)
+#define __NR_utimensat (__NR_Linux + 301)
+#define __NR_signalfd (__NR_Linux + 302)
+#define __NR_timerfd (__NR_Linux + 303)
+#define __NR_eventfd (__NR_Linux + 304)
+#define __NR_fallocate (__NR_Linux + 305)
+#define __NR_timerfd_create (__NR_Linux + 306)
+#define __NR_timerfd_settime (__NR_Linux + 307)
+#define __NR_timerfd_gettime (__NR_Linux + 308)
+#define __NR_signalfd4 (__NR_Linux + 309)
+#define __NR_eventfd2 (__NR_Linux + 310)
+#define __NR_epoll_create1 (__NR_Linux + 311)
+#define __NR_dup3 (__NR_Linux + 312)
+#define __NR_pipe2 (__NR_Linux + 313)
+#define __NR_inotify_init1 (__NR_Linux + 314)
+#define __NR_preadv (__NR_Linux + 315)
+#define __NR_pwritev (__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317)
+#define __NR_perf_event_open (__NR_Linux + 318)
+#define __NR_recvmmsg (__NR_Linux + 319)
+#define __NR_accept4 (__NR_Linux + 320)
+#define __NR_prlimit64 (__NR_Linux + 321)
+#define __NR_fanotify_init (__NR_Linux + 322)
+#define __NR_fanotify_mark (__NR_Linux + 323)
+#define __NR_clock_adjtime (__NR_Linux + 324)
+#define __NR_name_to_handle_at (__NR_Linux + 325)
+#define __NR_open_by_handle_at (__NR_Linux + 326)
+#define __NR_syncfs (__NR_Linux + 327)
+#define __NR_setns (__NR_Linux + 328)
+#define __NR_sendmmsg (__NR_Linux + 329)
+
+#define __NR_Linux_syscalls (__NR_sendmmsg + 1)
+
+
+#define __IGNORE_select /* newselect */
+#define __IGNORE_fadvise64 /* fadvise64_64 */
+#define __IGNORE_utimes /* utime */
+
+
+#define HPUX_GATEWAY_ADDR 0xC0000004
+#define LINUX_GATEWAY_ADDR 0x100
+
+#endif /* _UAPI_ASM_PARISC_UNISTD_H_ */
if (attrs)
return attrs;
- n = sizeof (default_attrs) / sizeof (struct attribute *);
+ n = ARRAY_SIZE(default_attrs);
if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
n += 2;
&mce_cmci_disabled
};
-static struct dev_ext_attribute dev_attr_bios_cmci_threshold = {
- __ATTR(bios_cmci_threshold, 0444, device_show_int, NULL),
- &mce_bios_cmci_threshold
-};
-
static struct device_attribute *mce_device_attrs[] = {
&dev_attr_tolerant.attr,
&dev_attr_check_interval.attr,
&dev_attr_dont_log_ce.attr,
&dev_attr_ignore_ce.attr,
&dev_attr_cmci_disabled.attr,
- &dev_attr_bios_cmci_threshold.attr,
NULL
};
int err = 0;
if (shared_bank[bank]) {
-
nb = node_to_amd_nb(amd_get_nb_id(cpu));
- WARN_ON(!nb);
/* threshold descriptor already initialized on this node? */
- if (nb->bank4) {
+ if (nb && nb->bank4) {
/* yes, use it */
b = nb->bank4;
err = kobject_add(b->kobj, &dev->kobj, name);
atomic_set(&b->cpus, 1);
/* nb is already initialized, see above */
- WARN_ON(nb->bank4);
- nb->bank4 = b;
+ if (nb) {
+ WARN_ON(nb->bank4);
+ nb->bank4 = b;
+ }
}
err = allocate_threshold_blocks(cpu, bank, 0,
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
},
},
- { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */
- .callback = set_bios_reboot,
- .ident = "CompuLab SBC-FITPC2",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
- DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
- },
- },
{ /* Handle problems with rebooting on ASUS P4S800 */
.callback = set_bios_reboot,
.ident = "ASUS P4S800",
#ifdef CONFIG_X86_64
if (max_pfn > max_low_pfn) {
- max_pfn_mapped = init_memory_mapping(1UL<<32,
- max_pfn<<PAGE_SHIFT);
+ int i;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (ei->addr + ei->size <= 1UL << 32)
+ continue;
+
+ if (ei->type == E820_RESERVED)
+ continue;
+
+ max_pfn_mapped = init_memory_mapping(
+ ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr,
+ ei->addr + ei->size);
+ }
+
/* can we preseve max_low_pfn ?*/
max_low_pfn = max_pfn;
}
lidtl wakeup_idt
- /* Clear the EFLAGS but remember if we have EFLAGS.ID */
- movl $X86_EFLAGS_ID, %ecx
- pushl %ecx
- popfl
- pushfl
- popl %edi
+ /* Clear the EFLAGS */
pushl $0
popfl
- pushfl
- popl %edx
- xorl %edx, %edi
- andl %ecx, %edi /* %edi is zero iff CPUID & %cr4 are missing */
/* Check header signature... */
movl signature, %eax
movl %eax, %cr3
btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
- jz 1f
+ jnc 1f
movl pmode_cr4, %eax
movl %eax, %cr4
1:
btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
- jz 1f
+ jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
movl $MSR_EFER, %ecx
/* 'reset' window registers */
movi a4, 1
- wsr a4, PS
+ wsr a4, ps
rsync
- rsr a5, WINDOWBASE
+ rsr a5, windowbase
ssl a5
sll a4, a4
- wsr a4, WINDOWSTART
+ wsr a4, windowstart
rsync
movi a4, 0x00040000
- wsr a4, PS
+ wsr a4, ps
rsync
/* copy the loader to its address
-include include/asm-generic/Kbuild.asm
-
+generic-y += bitsperlong.h
+generic-y += bug.h
generic-y += clkdev.h
+generic-y += cputime.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
generic-y += exec.h
+generic-y += fcntl.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += ioctl.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += percpu.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += siginfo.h
+generic-y += statfs.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += xor.h
"l32i %0, %2, 0 \n\t"
"add %0, %0, %1 \n\t"
"s32i %0, %2, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n"
: "=&a" (vval)
: "a" (i), "a" (v)
"l32i %0, %2, 0 \n\t"
"sub %0, %0, %1 \n\t"
"s32i %0, %2, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n"
: "=&a" (vval)
: "a" (i), "a" (v)
"l32i %0, %2, 0 \n\t"
"add %0, %0, %1 \n\t"
"s32i %0, %2, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n"
: "=&a" (vval)
: "a" (i), "a" (v)
"l32i %0, %2, 0 \n\t"
"sub %0, %0, %1 \n\t"
"s32i %0, %2, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n"
: "=&a" (vval)
: "a" (i), "a" (v)
"xor %1, %4, %3 \n\t"
"and %0, %0, %4 \n\t"
"s32i %0, %2, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n"
: "=&a" (vval), "=a" (mask)
: "a" (v), "a" (all_f), "1" (mask)
"l32i %0, %2, 0 \n\t"
"or %0, %0, %1 \n\t"
"s32i %0, %2, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n"
: "=&a" (vval)
: "a" (mask), "a" (v)
+++ /dev/null
-#ifndef __XTENSA_AUXVEC_H
-#define __XTENSA_AUXVEC_H
-
-#endif
+++ /dev/null
-#include <asm-generic/bitsperlong.h>
+++ /dev/null
-/*
- * include/asm-xtensa/bug.h
- *
- * Macros to cause a 'bug' message.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_BUG_H
-#define _XTENSA_BUG_H
-
-#include <asm-generic/bug.h>
-
-#endif /* _XTENSA_BUG_H */
+++ /dev/null
-#ifndef _XTENSA_BYTEORDER_H
-#define _XTENSA_BYTEORDER_H
-
-#ifdef __XTENSA_EL__
-#include <linux/byteorder/little_endian.h>
-#elif defined(__XTENSA_EB__)
-#include <linux/byteorder/big_endian.h>
-#else
-# error processor byte order undefined!
-#endif
-
-#endif /* _XTENSA_BYTEORDER_H */
static inline u32 xtensa_get_cacheattr(void)
{
u32 r;
- asm volatile(" rsr %0, CACHEATTR" : "=a"(r));
+ asm volatile(" rsr %0, cacheattr" : "=a"(r));
return r;
}
"bne %0, %2, 1f \n\t"
"s32i %3, %1, 0 \n\t"
"1: \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n\t"
: "=&a" (old)
: "a" (p), "a" (old), "r" (new)
__asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t"
"l32i %0, %1, 0 \n\t"
"s32i %2, %1, 0 \n\t"
- "wsr a15, "__stringify(PS)" \n\t"
+ "wsr a15, ps \n\t"
"rsync \n\t"
: "=&a" (tmp)
: "a" (m), "a" (val)
#if XCHAL_HAVE_CP
#define RSR_CPENABLE(x) do { \
- __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \
+ __asm__ __volatile__("rsr %0, cpenable" : "=a" (x)); \
} while(0);
#define WSR_CPENABLE(x) do { \
- __asm__ __volatile__("wsr %0," __stringify(CPENABLE) "; rsync" \
- :: "a" (x)); \
+ __asm__ __volatile__("wsr %0, cpenable; rsync" :: "a" (x)); \
} while(0);
#endif /* XCHAL_HAVE_CP */
+++ /dev/null
-#ifndef _XTENSA_CPUTIME_H
-#define _XTENSA_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* _XTENSA_CPUTIME_H */
static __inline__ u32 xtensa_get_ccount(void)
{
u32 ccount;
- asm volatile ("rsr %0, 234; # CCOUNT\n" : "=r" (ccount));
+ asm volatile ("rsr %0, ccount\n" : "=r" (ccount));
return ccount;
}
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-/*
- * include/asm-xtensa/div64.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2007 Tensilica Inc.
- */
-
-#ifndef _XTENSA_DIV64_H
-#define _XTENSA_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* _XTENSA_DIV64_H */
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-/*
- * include/asm-xtensa/errno.h
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- *
- * Copyright (C) 2002 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_ERRNO_H
-#define _XTENSA_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _XTENSA_ERRNO_H */
+++ /dev/null
-#include <asm-generic/fcntl.h>
+++ /dev/null
-#include <asm-generic/futex.h>
+++ /dev/null
-/*
- * include/asm-xtensa/hardirq.h
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- *
- * Copyright (C) 2002 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_HARDIRQ_H
-#define _XTENSA_HARDIRQ_H
-
-#include <asm-generic/hardirq.h>
-
-#endif /* _XTENSA_HARDIRQ_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-/*
- * include/asm-xtensa/ioctls.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 - 2005 Tensilica Inc.
- *
- * Derived from "include/asm-i386/ioctls.h"
- */
-
-#ifndef _XTENSA_IOCTLS_H
-#define _XTENSA_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX _IO('f', 1)
-#define FIONCLEX _IO('f', 2)
-#define FIOASYNC _IOW('f', 125, int)
-#define FIONBIO _IOW('f', 126, int)
-#define FIONREAD _IOR('f', 127, int)
-#define TIOCINQ FIONREAD
-#define FIOQSIZE _IOR('f', 128, loff_t)
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-
-#define TCGETA _IOR('t', 23, struct termio)
-#define TCSETA _IOW('t', 24, struct termio)
-#define TCSETAW _IOW('t', 25, struct termio)
-#define TCSETAF _IOW('t', 28, struct termio)
-
-#define TCSBRK _IO('t', 29)
-#define TCXONC _IO('t', 30)
-#define TCFLSH _IO('t', 31)
-
-#define TIOCSWINSZ _IOW('t', 103, struct winsize)
-#define TIOCGWINSZ _IOR('t', 104, struct winsize)
-#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
-#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
-#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
-
-#define TIOCSPGRP _IOW('t', 118, int)
-#define TIOCGPGRP _IOR('t', 119, int)
-
-#define TIOCEXCL _IO('T', 12)
-#define TIOCNXCL _IO('T', 13)
-#define TIOCSCTTY _IO('T', 14)
-
-#define TIOCSTI _IOW('T', 18, char)
-#define TIOCMGET _IOR('T', 21, unsigned int)
-#define TIOCMBIS _IOW('T', 22, unsigned int)
-#define TIOCMBIC _IOW('T', 23, unsigned int)
-#define TIOCMSET _IOW('T', 24, unsigned int)
-# define TIOCM_LE 0x001
-# define TIOCM_DTR 0x002
-# define TIOCM_RTS 0x004
-# define TIOCM_ST 0x008
-# define TIOCM_SR 0x010
-# define TIOCM_CTS 0x020
-# define TIOCM_CAR 0x040
-# define TIOCM_RNG 0x080
-# define TIOCM_DSR 0x100
-# define TIOCM_CD TIOCM_CAR
-# define TIOCM_RI TIOCM_RNG
-
-#define TIOCGSOFTCAR _IOR('T', 25, unsigned int)
-#define TIOCSSOFTCAR _IOW('T', 26, unsigned int)
-#define TIOCLINUX _IOW('T', 28, char)
-#define TIOCCONS _IO('T', 29)
-#define TIOCGSERIAL 0x803C541E /*_IOR('T', 30, struct serial_struct)*/
-#define TIOCSSERIAL 0x403C541F /*_IOW('T', 31, struct serial_struct)*/
-#define TIOCPKT _IOW('T', 32, int)
-# define TIOCPKT_DATA 0
-# define TIOCPKT_FLUSHREAD 1
-# define TIOCPKT_FLUSHWRITE 2
-# define TIOCPKT_STOP 4
-# define TIOCPKT_START 8
-# define TIOCPKT_NOSTOP 16
-# define TIOCPKT_DOSTOP 32
-# define TIOCPKT_IOCTL 64
-
-
-#define TIOCNOTTY _IO('T', 34)
-#define TIOCSETD _IOW('T', 35, int)
-#define TIOCGETD _IOR('T', 36, int)
-#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/
-#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/
-#define TIOCSBRK _IO('T', 39) /* BSD compatibility */
-#define TIOCCBRK _IO('T', 40) /* BSD compatibility */
-#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/
-#define TCGETS2 _IOR('T', 42, struct termios2)
-#define TCSETS2 _IOW('T', 43, struct termios2)
-#define TCSETSW2 _IOW('T', 44, struct termios2)
-#define TCSETSF2 _IOW('T', 45, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-#define TIOCVHANGUP _IO('T', 0x37)
-
-#define TIOCSERCONFIG _IO('T', 83)
-#define TIOCSERGWILD _IOR('T', 84, int)
-#define TIOCSERSWILD _IOW('T', 85, int)
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */
- /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */
-#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
-
-#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#endif /* _XTENSA_IOCTLS_H */
+++ /dev/null
-/*
- * include/asm-xtensa/ipcbuf.h
- *
- * The ipc64_perm structure for the Xtensa architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_IPCBUF_H
-#define _XTENSA_IPCBUF_H
-
-/*
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned long seq;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _XTENSA_IPCBUF_H */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
static inline unsigned long arch_local_save_flags(void)
{
unsigned long flags;
- asm volatile("rsr %0,"__stringify(PS) : "=a" (flags));
+ asm volatile("rsr %0, ps" : "=a" (flags));
return flags;
}
static inline void arch_local_irq_restore(unsigned long flags)
{
- asm volatile("wsr %0, "__stringify(PS)" ; rsync"
+ asm volatile("wsr %0, ps; rsync"
:: "a" (flags) : "memory");
}
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#ifndef _XTENSA_KMAP_TYPES_H
-#define _XTENSA_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif /* _XTENSA_KMAP_TYPES_H */
+++ /dev/null
-#include <asm-generic/kvm_para.h>
+++ /dev/null
-/*
- * include/asm-xtensa/local.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_LOCAL_H
-#define _XTENSA_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _XTENSA_LOCAL_H */
+++ /dev/null
-#include <asm-generic/local64.h>
+++ /dev/null
-/*
- * include/asm-xtensa/mman.h
- *
- * Xtensa Processor memory-manager definitions
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 by Ralf Baechle
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_MMAN_H
-#define _XTENSA_MMAN_H
-
-/*
- * Protections are chosen from these bits, OR'd together. The
- * implementation does not necessarily support PROT_EXEC or PROT_WRITE
- * without PROT_READ. The only guarantees are that no writing will be
- * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
- */
-
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-
-#define PROT_SEM 0x10 /* page may be used for atomic ops */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */
-
-/*
- * Flags for mmap
- */
-#define MAP_SHARED 0x001 /* Share changes */
-#define MAP_PRIVATE 0x002 /* Changes are private */
-#define MAP_TYPE 0x00f /* Mask for type of mapping */
-#define MAP_FIXED 0x010 /* Interpret addr exactly */
-
-/* not used by linux, but here to make sure we don't clash with ABI defines */
-#define MAP_RENAME 0x020 /* Assign page to file */
-#define MAP_AUTOGROW 0x040 /* File may grow by writing */
-#define MAP_LOCAL 0x080 /* Copy on fork/sproc */
-#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */
-
-/* These are linux-specific */
-#define MAP_NORESERVE 0x0400 /* don't check for reservations */
-#define MAP_ANONYMOUS 0x0800 /* don't use a file */
-#define MAP_GROWSDOWN 0x1000 /* stack-like segment */
-#define MAP_DENYWRITE 0x2000 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */
-#define MAP_LOCKED 0x8000 /* pages are locked */
-#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x20000 /* do not block on IO */
-#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB 0x80000 /* create a huge page mapping */
-
-/*
- * Flags for msync
- */
-#define MS_ASYNC 0x0001 /* sync memory asynchronously */
-#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */
-#define MS_SYNC 0x0004 /* synchronous memory sync */
-
-/*
- * Flags for mlockall
- */
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#define MADV_NORMAL 0 /* no further special treatment */
-#define MADV_RANDOM 1 /* expect random page references */
-#define MADV_SEQUENTIAL 2 /* expect sequential page references */
-#define MADV_WILLNEED 3 /* will need these pages */
-#define MADV_DONTNEED 4 /* don't need these pages */
-
-/* common parameters: try to keep these consistent across architectures */
-#define MADV_REMOVE 9 /* remove these pages & resources */
-#define MADV_DONTFORK 10 /* don't inherit across fork */
-#define MADV_DOFORK 11 /* do inherit across fork */
-
-#define MADV_MERGEABLE 12 /* KSM may merge identical pages */
-#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */
-
-#define MADV_HUGEPAGE 14 /* Worth backing with hugepages */
-#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */
-
-#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump,
- overrides the coredump filter bits */
-#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */
-
-/* compatibility flags */
-#define MAP_FILE 0
-
-#endif /* _XTENSA_MMAN_H */
static inline void set_rasid_register (unsigned long val)
{
- __asm__ __volatile__ (" wsr %0, "__stringify(RASID)"\n\t"
+ __asm__ __volatile__ (" wsr %0, rasid\n\t"
" isync\n" : : "a" (val));
}
static inline unsigned long get_rasid_register (void)
{
unsigned long tmp;
- __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp));
+ __asm__ __volatile__ (" rsr %0, rasid\n\t" : "=a" (tmp));
return tmp;
}
+++ /dev/null
-/*
- * include/asm-xtensa/msgbuf.h
- *
- * The msqid64_ds structure for the Xtensa architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef _XTENSA_MSGBUF_H
-#define _XTENSA_MSGBUF_H
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
-#ifdef __XTENSA_EB__
- unsigned int __unused1;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned int __unused2;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned int __unused3;
- __kernel_time_t msg_ctime; /* last change time */
-#elif defined(__XTENSA_EL__)
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned int __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned int __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned int __unused3;
-#else
-# error processor byte order undefined!
-#endif
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _XTENSA_MSGBUF_H */
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-
#ifndef _XTENSA_PARAM_H
#define _XTENSA_PARAM_H
-#ifdef __KERNEL__
+#include <uapi/asm/param.h>
+
# define HZ CONFIG_HZ /* internal timer frequency */
# define USER_HZ 100 /* for user interfaces in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */
-#else
-# define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NGROUPS
-#define NGROUPS 32
-#endif
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
#endif /* _XTENSA_PARAM_H */
+++ /dev/null
-/*
- * linux/include/asm-xtensa/percpu.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_PERCPU__
-#define _XTENSA_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* _XTENSA_PERCPU__ */
+++ /dev/null
-/*
- * include/asm-xtensa/poll.h
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_POLL_H
-#define _XTENSA_POLL_H
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 0x0100
-#define POLLREMOVE 0x0800
-
-#include <asm-generic/poll.h>
-
-#endif /* _XTENSA_POLL_H */
+++ /dev/null
-/*
- * include/asm-xtensa/posix_types.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Largely copied from include/asm-ppc/posix_types.h
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_POSIX_TYPES_H
-#define _XTENSA_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-#define __kernel_size_t __kernel_size_t
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-
-typedef unsigned short __kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif /* _XTENSA_POSIX_TYPES_H */
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-
#ifndef _XTENSA_PTRACE_H
#define _XTENSA_PTRACE_H
-/*
- * Kernel stack
- *
- * +-----------------------+ -------- STACK_SIZE
- * | register file | |
- * +-----------------------+ |
- * | struct pt_regs | |
- * +-----------------------+ | ------ PT_REGS_OFFSET
- * double : 16 bytes spill area : | ^
- * excetion :- - - - - - - - - - - -: | |
- * frame : struct pt_regs : | |
- * :- - - - - - - - - - - -: | |
- * | | | |
- * | memory stack | | |
- * | | | |
- * ~ ~ ~ ~
- * ~ ~ ~ ~
- * | | | |
- * | | | |
- * +-----------------------+ | | --- STACK_BIAS
- * | struct task_struct | | | ^
- * current --> +-----------------------+ | | |
- * | struct thread_info | | | |
- * +-----------------------+ --------
- */
-
-#define KERNEL_STACK_SIZE (2 * PAGE_SIZE)
-
-/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */
-
-#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */
-#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */
-#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */
-#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */
-#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */
-#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */
-#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */
-#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */
-#define EXC_TABLE_SIZE 0x400
+#include <uapi/asm/ptrace.h>
-/* Registers used by strace */
-
-#define REG_A_BASE 0x0000
-#define REG_AR_BASE 0x0100
-#define REG_PC 0x0020
-#define REG_PS 0x02e6
-#define REG_WB 0x0248
-#define REG_WS 0x0249
-#define REG_LBEG 0x0200
-#define REG_LEND 0x0201
-#define REG_LCOUNT 0x0202
-#define REG_SAR 0x0203
-
-#define SYSCALL_NR 0x00ff
-
-/* Other PTRACE_ values defined in <linux/ptrace.h> using values 0-9,16,17,24 */
-
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETXTREGS 18
-#define PTRACE_SETXTREGS 19
-
-#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
#endif /* _XTENSA_PTRACE_H */
/* Special registers. */
-#define LBEG 0
-#define LEND 1
-#define LCOUNT 2
-#define SAR 3
-#define BR 4
-#define SCOMPARE1 12
-#define ACCHI 16
-#define ACCLO 17
-#define MR 32
-#define WINDOWBASE 72
-#define WINDOWSTART 73
-#define PTEVADDR 83
-#define RASID 90
-#define ITLBCFG 91
-#define DTLBCFG 92
-#define IBREAKENABLE 96
-#define DDR 104
-#define IBREAKA 128
-#define DBREAKA 144
-#define DBREAKC 160
-#define EPC 176
-#define EPC_1 177
-#define DEPC 192
-#define EPS 192
-#define EPS_1 193
-#define EXCSAVE 208
-#define EXCSAVE_1 209
-#define INTERRUPT 226
-#define INTENABLE 228
-#define PS 230
-#define THREADPTR 231
-#define EXCCAUSE 232
-#define DEBUGCAUSE 233
-#define CCOUNT 234
-#define PRID 235
-#define ICOUNT 236
-#define ICOUNTLEVEL 237
-#define EXCVADDR 238
-#define CCOMPARE 240
-#define MISC_SR 244
-
-/* Special names for read-only and write-only interrupt registers. */
-
-#define INTREAD 226
-#define INTSET 226
-#define INTCLEAR 227
+#define SREG_MR 32
+#define SREG_IBREAKA 128
+#define SREG_DBREAKA 144
+#define SREG_DBREAKC 160
+#define SREG_EPC 176
+#define SREG_EPS 192
+#define SREG_EXCSAVE 208
+#define SREG_CCOMPARE 240
+#define SREG_MISC 244
/* EXCCAUSE register fields */
+++ /dev/null
-/*
- * include/asm-xtensa/resource.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_RESOURCE_H
-#define _XTENSA_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _XTENSA_RESOURCE_H */
+++ /dev/null
-/*
- * include/asm-xtensa/scatterlist.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SCATTERLIST_H
-#define _XTENSA_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* _XTENSA_SCATTERLIST_H */
+++ /dev/null
-/*
- * include/asm-xtensa/sections.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SECTIONS_H
-#define _XTENSA_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* _XTENSA_SECTIONS_H */
+++ /dev/null
-/*
- * include/asm-xtensa/sembuf.h
- *
- * The semid64_ds structure for Xtensa architecture.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- *
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- */
-
-#ifndef _XTENSA_SEMBUF_H
-#define _XTENSA_SEMBUF_H
-
-#include <asm/byteorder.h>
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-#ifdef __XTENSA_EL__
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
-#else
- unsigned long __unused1;
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused2;
- __kernel_time_t sem_ctime; /* last change time */
-#endif
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* __ASM_XTENSA_SEMBUF_H */
+++ /dev/null
-/*
- * include/asm-xtensa/setup.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SETUP_H
-#define _XTENSA_SETUP_H
-
-#define COMMAND_LINE_SIZE 256
-
-extern void set_except_vector(int n, void *addr);
-
-#endif
+++ /dev/null
-/*
- * include/asm-xtensa/shmbuf.h
- *
- * The shmid64_ds structure for Xtensa architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SHMBUF_H
-#define _XTENSA_SHMBUF_H
-
-#if defined (__XTENSA_EL__)
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-#elif defined (__XTENSA_EB__)
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-#else
-# error endian order not defined
-#endif
-
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _XTENSA_SHMBUF_H */
+++ /dev/null
-/*
- * include/asm-xtensa/sigcontext.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2007 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SIGCONTEXT_H
-#define _XTENSA_SIGCONTEXT_H
-
-
-struct sigcontext {
- unsigned long sc_pc;
- unsigned long sc_ps;
- unsigned long sc_lbeg;
- unsigned long sc_lend;
- unsigned long sc_lcount;
- unsigned long sc_sar;
- unsigned long sc_acclo;
- unsigned long sc_acchi;
- unsigned long sc_a[16];
- void *sc_xtregs;
-};
-
-#endif /* _XTENSA_SIGCONTEXT_H */
+++ /dev/null
-/*
- * include/asm-xtensa/siginfo.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SIGINFO_H
-#define _XTENSA_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* _XTENSA_SIGINFO_H */
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-
#ifndef _XTENSA_SIGNAL_H
#define _XTENSA_SIGNAL_H
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#endif
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/* #define SIGLOST 29 */
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
+#include <uapi/asm/signal.h>
#ifndef __ASSEMBLY__
-
-#define SIG_BLOCK 0 /* for blocking signals */
-#define SIG_UNBLOCK 1 /* for unblocking signals */
-#define SIG_SETMASK 2 /* for setting the signal mask */
-
-/* Type of a signal handler. */
-typedef void (*__sighandler_t)(int);
-
-#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
-#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
-#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
-
-#ifdef __KERNEL__
struct sigaction {
__sighandler_t sa_handler;
unsigned long sa_flags;
struct sigaction sa;
};
-#else
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
#include <asm/sigcontext.h>
#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _XTENSA_SIGNAL_H */
+++ /dev/null
-/*
- * include/asm-xtensa/socket.h
- *
- * Copied from i386.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _XTENSA_SOCKET_H
-#define _XTENSA_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#define SO_PROTOCOL 38
-#define SO_DOMAIN 39
-
-#define SO_RXQ_OVFL 40
-
-#define SO_WIFI_STATUS 41
-#define SCM_WIFI_STATUS SO_WIFI_STATUS
-#define SO_PEEK_OFF 42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS 43
-
-#endif /* _XTENSA_SOCKET_H */
+++ /dev/null
-/*
- * include/asm-xtensa/sockios.h
- *
- * Socket-level I/O control calls. Copied from MIPS.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 by Ralf Baechle
- * Copyright (C) 2001 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SOCKIOS_H
-#define _XTENSA_SOCKIOS_H
-
-#include <asm/ioctl.h>
-
-/* Socket-level I/O control calls. */
-
-#define FIOGETOWN _IOR('f', 123, int)
-#define FIOSETOWN _IOW('f', 124, int)
-
-#define SIOCATMARK _IOR('s', 7, int)
-#define SIOCSPGRP _IOW('s', 8, pid_t)
-#define SIOCGPGRP _IOR('s', 9, pid_t)
-
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _XTENSA_SOCKIOS_H */
+++ /dev/null
-/*
- * include/asm-xtensa/stat.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2007 Tensilica Inc.
- */
-
-#ifndef _XTENSA_STAT_H
-#define _XTENSA_STAT_H
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned long st_rdev;
- long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct stat64 {
- unsigned long long st_dev; /* Device */
- unsigned long long st_ino; /* File serial number */
- unsigned int st_mode; /* File mode. */
- unsigned int st_nlink; /* Link count. */
- unsigned int st_uid; /* User ID of the file's owner. */
- unsigned int st_gid; /* Group ID of the file's group. */
- unsigned long long st_rdev; /* Device number, if device. */
- long long st_size; /* Size of file, in bytes. */
- unsigned long st_blksize; /* Optimal block size for I/O. */
- unsigned long __unused2;
- unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long st_atime; /* Time of last access. */
- unsigned long st_atime_nsec;
- unsigned long st_mtime; /* Time of last modification. */
- unsigned long st_mtime_nsec;
- unsigned long st_ctime; /* Time of last status change. */
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _XTENSA_STAT_H */
+++ /dev/null
-/*
- * include/asm-xtensa/statfs.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_STATFS_H
-#define _XTENSA_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _XTENSA_STATFS_H */
-
+++ /dev/null
-/*
- * include/asm-xtensa/swab.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SWAB_H
-#define _XTENSA_SWAB_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
- __u32 res;
- /* instruction sequence from Xtensa ISA release 2/2000 */
- __asm__("ssai 8 \n\t"
- "srli %0, %1, 16 \n\t"
- "src %0, %0, %1 \n\t"
- "src %0, %0, %0 \n\t"
- "src %0, %1, %0 \n"
- : "=&a" (res)
- : "a" (x)
- );
- return res;
-}
-#define __arch_swab32 __arch_swab32
-
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
-{
- /* Given that 'short' values are signed (i.e., can be negative),
- * we cannot assume that the upper 16-bits of the register are
- * zero. We are careful to mask values after shifting.
- */
-
- /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc
- * inserts an extui instruction after putting this function inline
- * to ensure that it uses only the least-significant 16 bits of
- * the result. xt-xcc doesn't use an extui, but assumes the
- * __asm__ macro follows convention that the upper 16 bits of an
- * 'unsigned short' result are still zero. This macro doesn't
- * follow convention; indeed, it leaves garbage in the upport 16
- * bits of the register.
-
- * Declaring the temporary variables 'res' and 'tmp' to be 32-bit
- * types while the return type of the function is a 16-bit type
- * forces both compilers to insert exactly one extui instruction
- * (or equivalent) to mask off the upper 16 bits. */
-
- __u32 res;
- __u32 tmp;
-
- __asm__("extui %1, %2, 8, 8\n\t"
- "slli %0, %2, 8 \n\t"
- "or %0, %0, %1 \n"
- : "=&a" (res), "=&a" (tmp)
- : "a" (x)
- );
-
- return res;
-}
-#define __arch_swab16 __arch_swab16
-
-#endif /* _XTENSA_SWAB_H */
+++ /dev/null
-/*
- * include/asm-xtensa/termbits.h
- *
- * Copied from SH.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_TERMBITS_H
-#define _XTENSA_TERMBITS_H
-
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-#define EXTPROC 0200000
-
-/* tcflow() and TCXONC use these */
-
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _XTENSA_TERMBITS_H */
+++ /dev/null
-/*
- * include/asm-xtensa/termios.h
- *
- * Copied from SH.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_TERMIOS_H
-#define _XTENSA_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* Modem lines */
-
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/* intr=^C quit=^\ erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* _XTENSA_TERMIOS_H */
* Register access.
*/
-#define WSR_CCOUNT(r) asm volatile ("wsr %0,"__stringify(CCOUNT) :: "a" (r))
-#define RSR_CCOUNT(r) asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (r))
-#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r))
-#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r))
+#define WSR_CCOUNT(r) asm volatile ("wsr %0, ccount" :: "a" (r))
+#define RSR_CCOUNT(r) asm volatile ("rsr %0, ccount" : "=a" (r))
+#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(SREG_CCOMPARE)"+"__stringify(x) :: "a"(r))
+#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(SREG_CCOMPARE)"+"__stringify(x) : "=a"(r))
static inline unsigned long get_ccount (void)
{
static inline void set_itlbcfg_register (unsigned long val)
{
- __asm__ __volatile__("wsr %0, "__stringify(ITLBCFG)"\n\t" "isync\n\t"
+ __asm__ __volatile__("wsr %0, itlbcfg\n\t" "isync\n\t"
: : "a" (val));
}
static inline void set_dtlbcfg_register (unsigned long val)
{
- __asm__ __volatile__("wsr %0, "__stringify(DTLBCFG)"; dsync\n\t"
+ __asm__ __volatile__("wsr %0, dtlbcfg; dsync\n\t"
: : "a" (val));
}
static inline void set_ptevaddr_register (unsigned long val)
{
- __asm__ __volatile__(" wsr %0, "__stringify(PTEVADDR)"; isync\n"
+ __asm__ __volatile__(" wsr %0, ptevaddr; isync\n"
: : "a" (val));
}
static inline unsigned long read_ptevaddr_register (void)
{
unsigned long tmp;
- __asm__ __volatile__("rsr %0, "__stringify(PTEVADDR)"\n\t" : "=a" (tmp));
+ __asm__ __volatile__("rsr %0, ptevaddr\n\t" : "=a" (tmp));
return tmp;
}
+++ /dev/null
-/*
- * include/asm-xtensa/topology.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_TOPOLOGY_H
-#define _XTENSA_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _XTENSA_TOPOLOGY_H */
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-
#ifndef _XTENSA_TYPES_H
#define _XTENSA_TYPES_H
-#include <asm-generic/int-ll64.h>
-
-#ifdef __ASSEMBLY__
-# define __XTENSA_UL(x) (x)
-# define __XTENSA_UL_CONST(x) x
-#else
-# define __XTENSA_UL(x) ((unsigned long)(x))
-# define __XTENSA_UL_CONST(x) x##UL
-#endif
+#include <uapi/asm/types.h>
#ifndef __ASSEMBLY__
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
-#ifdef __KERNEL__
#define BITS_PER_LONG 32
-#endif /* __KERNEL__ */
#endif
-
#endif /* _XTENSA_TYPES_H */
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-#ifndef _XTENSA_UNISTD_H
-#define _XTENSA_UNISTD_H
+#include <uapi/asm/unistd.h>
-#ifndef __SYSCALL
-# define __SYSCALL(nr,func,nargs)
-#endif
-
-#define __NR_spill 0
-__SYSCALL( 0, sys_ni_syscall, 0)
-#define __NR_xtensa 1
-__SYSCALL( 1, sys_ni_syscall, 0)
-#define __NR_available4 2
-__SYSCALL( 2, sys_ni_syscall, 0)
-#define __NR_available5 3
-__SYSCALL( 3, sys_ni_syscall, 0)
-#define __NR_available6 4
-__SYSCALL( 4, sys_ni_syscall, 0)
-#define __NR_available7 5
-__SYSCALL( 5, sys_ni_syscall, 0)
-#define __NR_available8 6
-__SYSCALL( 6, sys_ni_syscall, 0)
-#define __NR_available9 7
-__SYSCALL( 7, sys_ni_syscall, 0)
-
-/* File Operations */
-
-#define __NR_open 8
-__SYSCALL( 8, sys_open, 3)
-#define __NR_close 9
-__SYSCALL( 9, sys_close, 1)
-#define __NR_dup 10
-__SYSCALL( 10, sys_dup, 1)
-#define __NR_dup2 11
-__SYSCALL( 11, sys_dup2, 2)
-#define __NR_read 12
-__SYSCALL( 12, sys_read, 3)
-#define __NR_write 13
-__SYSCALL( 13, sys_write, 3)
-#define __NR_select 14
-__SYSCALL( 14, sys_select, 5)
-#define __NR_lseek 15
-__SYSCALL( 15, sys_lseek, 3)
-#define __NR_poll 16
-__SYSCALL( 16, sys_poll, 3)
-#define __NR__llseek 17
-__SYSCALL( 17, sys_llseek, 5)
-#define __NR_epoll_wait 18
-__SYSCALL( 18, sys_epoll_wait, 4)
-#define __NR_epoll_ctl 19
-__SYSCALL( 19, sys_epoll_ctl, 4)
-#define __NR_epoll_create 20
-__SYSCALL( 20, sys_epoll_create, 1)
-#define __NR_creat 21
-__SYSCALL( 21, sys_creat, 2)
-#define __NR_truncate 22
-__SYSCALL( 22, sys_truncate, 2)
-#define __NR_ftruncate 23
-__SYSCALL( 23, sys_ftruncate, 2)
-#define __NR_readv 24
-__SYSCALL( 24, sys_readv, 3)
-#define __NR_writev 25
-__SYSCALL( 25, sys_writev, 3)
-#define __NR_fsync 26
-__SYSCALL( 26, sys_fsync, 1)
-#define __NR_fdatasync 27
-__SYSCALL( 27, sys_fdatasync, 1)
-#define __NR_truncate64 28
-__SYSCALL( 28, sys_truncate64, 2)
-#define __NR_ftruncate64 29
-__SYSCALL( 29, sys_ftruncate64, 2)
-#define __NR_pread64 30
-__SYSCALL( 30, sys_pread64, 6)
-#define __NR_pwrite64 31
-__SYSCALL( 31, sys_pwrite64, 6)
-
-#define __NR_link 32
-__SYSCALL( 32, sys_link, 2)
-#define __NR_rename 33
-__SYSCALL( 33, sys_rename, 2)
-#define __NR_symlink 34
-__SYSCALL( 34, sys_symlink, 2)
-#define __NR_readlink 35
-__SYSCALL( 35, sys_readlink, 3)
-#define __NR_mknod 36
-__SYSCALL( 36, sys_mknod, 3)
-#define __NR_pipe 37
-__SYSCALL( 37, sys_pipe, 1)
-#define __NR_unlink 38
-__SYSCALL( 38, sys_unlink, 1)
-#define __NR_rmdir 39
-__SYSCALL( 39, sys_rmdir, 1)
-
-#define __NR_mkdir 40
-__SYSCALL( 40, sys_mkdir, 2)
-#define __NR_chdir 41
-__SYSCALL( 41, sys_chdir, 1)
-#define __NR_fchdir 42
-__SYSCALL( 42, sys_fchdir, 1)
-#define __NR_getcwd 43
-__SYSCALL( 43, sys_getcwd, 2)
-
-#define __NR_chmod 44
-__SYSCALL( 44, sys_chmod, 2)
-#define __NR_chown 45
-__SYSCALL( 45, sys_chown, 3)
-#define __NR_stat 46
-__SYSCALL( 46, sys_newstat, 2)
-#define __NR_stat64 47
-__SYSCALL( 47, sys_stat64, 2)
-
-#define __NR_lchown 48
-__SYSCALL( 48, sys_lchown, 3)
-#define __NR_lstat 49
-__SYSCALL( 49, sys_newlstat, 2)
-#define __NR_lstat64 50
-__SYSCALL( 50, sys_lstat64, 2)
-#define __NR_available51 51
-__SYSCALL( 51, sys_ni_syscall, 0)
-
-#define __NR_fchmod 52
-__SYSCALL( 52, sys_fchmod, 2)
-#define __NR_fchown 53
-__SYSCALL( 53, sys_fchown, 3)
-#define __NR_fstat 54
-__SYSCALL( 54, sys_newfstat, 2)
-#define __NR_fstat64 55
-__SYSCALL( 55, sys_fstat64, 2)
-
-#define __NR_flock 56
-__SYSCALL( 56, sys_flock, 2)
-#define __NR_access 57
-__SYSCALL( 57, sys_access, 2)
-#define __NR_umask 58
-__SYSCALL( 58, sys_umask, 1)
-#define __NR_getdents 59
-__SYSCALL( 59, sys_getdents, 3)
-#define __NR_getdents64 60
-__SYSCALL( 60, sys_getdents64, 3)
-#define __NR_fcntl64 61
-__SYSCALL( 61, sys_fcntl64, 3)
-#define __NR_available62 62
-__SYSCALL( 62, sys_ni_syscall, 0)
-#define __NR_fadvise64_64 63
-__SYSCALL( 63, xtensa_fadvise64_64, 6)
-#define __NR_utime 64 /* glibc 2.3.3 ?? */
-__SYSCALL( 64, sys_utime, 2)
-#define __NR_utimes 65
-__SYSCALL( 65, sys_utimes, 2)
-#define __NR_ioctl 66
-__SYSCALL( 66, sys_ioctl, 3)
-#define __NR_fcntl 67
-__SYSCALL( 67, sys_fcntl, 3)
-
-#define __NR_setxattr 68
-__SYSCALL( 68, sys_setxattr, 5)
-#define __NR_getxattr 69
-__SYSCALL( 69, sys_getxattr, 4)
-#define __NR_listxattr 70
-__SYSCALL( 70, sys_listxattr, 3)
-#define __NR_removexattr 71
-__SYSCALL( 71, sys_removexattr, 2)
-#define __NR_lsetxattr 72
-__SYSCALL( 72, sys_lsetxattr, 5)
-#define __NR_lgetxattr 73
-__SYSCALL( 73, sys_lgetxattr, 4)
-#define __NR_llistxattr 74
-__SYSCALL( 74, sys_llistxattr, 3)
-#define __NR_lremovexattr 75
-__SYSCALL( 75, sys_lremovexattr, 2)
-#define __NR_fsetxattr 76
-__SYSCALL( 76, sys_fsetxattr, 5)
-#define __NR_fgetxattr 77
-__SYSCALL( 77, sys_fgetxattr, 4)
-#define __NR_flistxattr 78
-__SYSCALL( 78, sys_flistxattr, 3)
-#define __NR_fremovexattr 79
-__SYSCALL( 79, sys_fremovexattr, 2)
-
-/* File Map / Shared Memory Operations */
-
-#define __NR_mmap2 80
-__SYSCALL( 80, sys_mmap_pgoff, 6)
-#define __NR_munmap 81
-__SYSCALL( 81, sys_munmap, 2)
-#define __NR_mprotect 82
-__SYSCALL( 82, sys_mprotect, 3)
-#define __NR_brk 83
-__SYSCALL( 83, sys_brk, 1)
-#define __NR_mlock 84
-__SYSCALL( 84, sys_mlock, 2)
-#define __NR_munlock 85
-__SYSCALL( 85, sys_munlock, 2)
-#define __NR_mlockall 86
-__SYSCALL( 86, sys_mlockall, 1)
-#define __NR_munlockall 87
-__SYSCALL( 87, sys_munlockall, 0)
-#define __NR_mremap 88
-__SYSCALL( 88, sys_mremap, 4)
-#define __NR_msync 89
-__SYSCALL( 89, sys_msync, 3)
-#define __NR_mincore 90
-__SYSCALL( 90, sys_mincore, 3)
-#define __NR_madvise 91
-__SYSCALL( 91, sys_madvise, 3)
-#define __NR_shmget 92
-__SYSCALL( 92, sys_shmget, 4)
-#define __NR_shmat 93
-__SYSCALL( 93, xtensa_shmat, 4)
-#define __NR_shmctl 94
-__SYSCALL( 94, sys_shmctl, 4)
-#define __NR_shmdt 95
-__SYSCALL( 95, sys_shmdt, 4)
-
-/* Socket Operations */
-
-#define __NR_socket 96
-__SYSCALL( 96, sys_socket, 3)
-#define __NR_setsockopt 97
-__SYSCALL( 97, sys_setsockopt, 5)
-#define __NR_getsockopt 98
-__SYSCALL( 98, sys_getsockopt, 5)
-#define __NR_shutdown 99
-__SYSCALL( 99, sys_shutdown, 2)
-
-#define __NR_bind 100
-__SYSCALL(100, sys_bind, 3)
-#define __NR_connect 101
-__SYSCALL(101, sys_connect, 3)
-#define __NR_listen 102
-__SYSCALL(102, sys_listen, 2)
-#define __NR_accept 103
-__SYSCALL(103, sys_accept, 3)
-
-#define __NR_getsockname 104
-__SYSCALL(104, sys_getsockname, 3)
-#define __NR_getpeername 105
-__SYSCALL(105, sys_getpeername, 3)
-#define __NR_sendmsg 106
-__SYSCALL(106, sys_sendmsg, 3)
-#define __NR_recvmsg 107
-__SYSCALL(107, sys_recvmsg, 3)
-#define __NR_send 108
-__SYSCALL(108, sys_send, 4)
-#define __NR_recv 109
-__SYSCALL(109, sys_recv, 4)
-#define __NR_sendto 110
-__SYSCALL(110, sys_sendto, 6)
-#define __NR_recvfrom 111
-__SYSCALL(111, sys_recvfrom, 6)
-
-#define __NR_socketpair 112
-__SYSCALL(112, sys_socketpair, 4)
-#define __NR_sendfile 113
-__SYSCALL(113, sys_sendfile, 4)
-#define __NR_sendfile64 114
-__SYSCALL(114, sys_sendfile64, 4)
-#define __NR_available115 115
-__SYSCALL(115, sys_ni_syscall, 0)
-
-/* Process Operations */
-
-#define __NR_clone 116
-__SYSCALL(116, xtensa_clone, 5)
-#define __NR_execve 117
-__SYSCALL(117, xtensa_execve, 3)
-#define __NR_exit 118
-__SYSCALL(118, sys_exit, 1)
-#define __NR_exit_group 119
-__SYSCALL(119, sys_exit_group, 1)
-#define __NR_getpid 120
-__SYSCALL(120, sys_getpid, 0)
-#define __NR_wait4 121
-__SYSCALL(121, sys_wait4, 4)
-#define __NR_waitid 122
-__SYSCALL(122, sys_waitid, 5)
-#define __NR_kill 123
-__SYSCALL(123, sys_kill, 2)
-#define __NR_tkill 124
-__SYSCALL(124, sys_tkill, 2)
-#define __NR_tgkill 125
-__SYSCALL(125, sys_tgkill, 3)
-#define __NR_set_tid_address 126
-__SYSCALL(126, sys_set_tid_address, 1)
-#define __NR_gettid 127
-__SYSCALL(127, sys_gettid, 0)
-#define __NR_setsid 128
-__SYSCALL(128, sys_setsid, 0)
-#define __NR_getsid 129
-__SYSCALL(129, sys_getsid, 1)
-#define __NR_prctl 130
-__SYSCALL(130, sys_prctl, 5)
-#define __NR_personality 131
-__SYSCALL(131, sys_personality, 1)
-#define __NR_getpriority 132
-__SYSCALL(132, sys_getpriority, 2)
-#define __NR_setpriority 133
-__SYSCALL(133, sys_setpriority, 3)
-#define __NR_setitimer 134
-__SYSCALL(134, sys_setitimer, 3)
-#define __NR_getitimer 135
-__SYSCALL(135, sys_getitimer, 2)
-#define __NR_setuid 136
-__SYSCALL(136, sys_setuid, 1)
-#define __NR_getuid 137
-__SYSCALL(137, sys_getuid, 0)
-#define __NR_setgid 138
-__SYSCALL(138, sys_setgid, 1)
-#define __NR_getgid 139
-__SYSCALL(139, sys_getgid, 0)
-#define __NR_geteuid 140
-__SYSCALL(140, sys_geteuid, 0)
-#define __NR_getegid 141
-__SYSCALL(141, sys_getegid, 0)
-#define __NR_setreuid 142
-__SYSCALL(142, sys_setreuid, 2)
-#define __NR_setregid 143
-__SYSCALL(143, sys_setregid, 2)
-#define __NR_setresuid 144
-__SYSCALL(144, sys_setresuid, 3)
-#define __NR_getresuid 145
-__SYSCALL(145, sys_getresuid, 3)
-#define __NR_setresgid 146
-__SYSCALL(146, sys_setresgid, 3)
-#define __NR_getresgid 147
-__SYSCALL(147, sys_getresgid, 3)
-#define __NR_setpgid 148
-__SYSCALL(148, sys_setpgid, 2)
-#define __NR_getpgid 149
-__SYSCALL(149, sys_getpgid, 1)
-#define __NR_getppid 150
-__SYSCALL(150, sys_getppid, 0)
-#define __NR_getpgrp 151
-__SYSCALL(151, sys_getpgrp, 0)
-
-#define __NR_reserved152 152 /* set_thread_area */
-__SYSCALL(152, sys_ni_syscall, 0)
-#define __NR_reserved153 153 /* get_thread_area */
-__SYSCALL(153, sys_ni_syscall, 0)
-#define __NR_times 154
-__SYSCALL(154, sys_times, 1)
-#define __NR_acct 155
-__SYSCALL(155, sys_acct, 1)
-#define __NR_sched_setaffinity 156
-__SYSCALL(156, sys_sched_setaffinity, 3)
-#define __NR_sched_getaffinity 157
-__SYSCALL(157, sys_sched_getaffinity, 3)
-#define __NR_capget 158
-__SYSCALL(158, sys_capget, 2)
-#define __NR_capset 159
-__SYSCALL(159, sys_capset, 2)
-#define __NR_ptrace 160
-__SYSCALL(160, sys_ptrace, 4)
-#define __NR_semtimedop 161
-__SYSCALL(161, sys_semtimedop, 5)
-#define __NR_semget 162
-__SYSCALL(162, sys_semget, 4)
-#define __NR_semop 163
-__SYSCALL(163, sys_semop, 4)
-#define __NR_semctl 164
-__SYSCALL(164, sys_semctl, 4)
-#define __NR_available165 165
-__SYSCALL(165, sys_ni_syscall, 0)
-#define __NR_msgget 166
-__SYSCALL(166, sys_msgget, 4)
-#define __NR_msgsnd 167
-__SYSCALL(167, sys_msgsnd, 4)
-#define __NR_msgrcv 168
-__SYSCALL(168, sys_msgrcv, 4)
-#define __NR_msgctl 169
-__SYSCALL(169, sys_msgctl, 4)
-#define __NR_available170 170
-__SYSCALL(170, sys_ni_syscall, 0)
-#define __NR_available171 171
-__SYSCALL(171, sys_ni_syscall, 0)
-
-/* File System */
-
-#define __NR_mount 172
-__SYSCALL(172, sys_mount, 5)
-#define __NR_swapon 173
-__SYSCALL(173, sys_swapon, 2)
-#define __NR_chroot 174
-__SYSCALL(174, sys_chroot, 1)
-#define __NR_pivot_root 175
-__SYSCALL(175, sys_pivot_root, 2)
-#define __NR_umount 176
-__SYSCALL(176, sys_umount, 2)
-#define __NR_swapoff 177
-__SYSCALL(177, sys_swapoff, 1)
-#define __NR_sync 178
-__SYSCALL(178, sys_sync, 0)
-#define __NR_available179 179
-__SYSCALL(179, sys_ni_syscall, 0)
-#define __NR_setfsuid 180
-__SYSCALL(180, sys_setfsuid, 1)
-#define __NR_setfsgid 181
-__SYSCALL(181, sys_setfsgid, 1)
-#define __NR_sysfs 182
-__SYSCALL(182, sys_sysfs, 3)
-#define __NR_ustat 183
-__SYSCALL(183, sys_ustat, 2)
-#define __NR_statfs 184
-__SYSCALL(184, sys_statfs, 2)
-#define __NR_fstatfs 185
-__SYSCALL(185, sys_fstatfs, 2)
-#define __NR_statfs64 186
-__SYSCALL(186, sys_statfs64, 3)
-#define __NR_fstatfs64 187
-__SYSCALL(187, sys_fstatfs64, 3)
-
-/* System */
-
-#define __NR_setrlimit 188
-__SYSCALL(188, sys_setrlimit, 2)
-#define __NR_getrlimit 189
-__SYSCALL(189, sys_getrlimit, 2)
-#define __NR_getrusage 190
-__SYSCALL(190, sys_getrusage, 2)
-#define __NR_futex 191
-__SYSCALL(191, sys_futex, 5)
-#define __NR_gettimeofday 192
-__SYSCALL(192, sys_gettimeofday, 2)
-#define __NR_settimeofday 193
-__SYSCALL(193, sys_settimeofday, 2)
-#define __NR_adjtimex 194
-__SYSCALL(194, sys_adjtimex, 1)
-#define __NR_nanosleep 195
-__SYSCALL(195, sys_nanosleep, 2)
-#define __NR_getgroups 196
-__SYSCALL(196, sys_getgroups, 2)
-#define __NR_setgroups 197
-__SYSCALL(197, sys_setgroups, 2)
-#define __NR_sethostname 198
-__SYSCALL(198, sys_sethostname, 2)
-#define __NR_setdomainname 199
-__SYSCALL(199, sys_setdomainname, 2)
-#define __NR_syslog 200
-__SYSCALL(200, sys_syslog, 3)
-#define __NR_vhangup 201
-__SYSCALL(201, sys_vhangup, 0)
-#define __NR_uselib 202
-__SYSCALL(202, sys_uselib, 1)
-#define __NR_reboot 203
-__SYSCALL(203, sys_reboot, 3)
-#define __NR_quotactl 204
-__SYSCALL(204, sys_quotactl, 4)
-#define __NR_nfsservctl 205
-__SYSCALL(205, sys_ni_syscall, 0)
-#define __NR__sysctl 206
-__SYSCALL(206, sys_sysctl, 1)
-#define __NR_bdflush 207
-__SYSCALL(207, sys_bdflush, 2)
-#define __NR_uname 208
-__SYSCALL(208, sys_newuname, 1)
-#define __NR_sysinfo 209
-__SYSCALL(209, sys_sysinfo, 1)
-#define __NR_init_module 210
-__SYSCALL(210, sys_init_module, 2)
-#define __NR_delete_module 211
-__SYSCALL(211, sys_delete_module, 1)
-
-#define __NR_sched_setparam 212
-__SYSCALL(212, sys_sched_setparam, 2)
-#define __NR_sched_getparam 213
-__SYSCALL(213, sys_sched_getparam, 2)
-#define __NR_sched_setscheduler 214
-__SYSCALL(214, sys_sched_setscheduler, 3)
-#define __NR_sched_getscheduler 215
-__SYSCALL(215, sys_sched_getscheduler, 1)
-#define __NR_sched_get_priority_max 216
-__SYSCALL(216, sys_sched_get_priority_max, 1)
-#define __NR_sched_get_priority_min 217
-__SYSCALL(217, sys_sched_get_priority_min, 1)
-#define __NR_sched_rr_get_interval 218
-__SYSCALL(218, sys_sched_rr_get_interval, 2)
-#define __NR_sched_yield 219
-__SYSCALL(219, sys_sched_yield, 0)
-#define __NR_available222 222
-__SYSCALL(222, sys_ni_syscall, 0)
-
-/* Signal Handling */
-
-#define __NR_restart_syscall 223
-__SYSCALL(223, sys_restart_syscall, 0)
-#define __NR_sigaltstack 224
-__SYSCALL(224, xtensa_sigaltstack, 2)
-#define __NR_rt_sigreturn 225
-__SYSCALL(225, xtensa_rt_sigreturn, 1)
-#define __NR_rt_sigaction 226
-__SYSCALL(226, sys_rt_sigaction, 4)
-#define __NR_rt_sigprocmask 227
-__SYSCALL(227, sys_rt_sigprocmask, 4)
-#define __NR_rt_sigpending 228
-__SYSCALL(228, sys_rt_sigpending, 2)
-#define __NR_rt_sigtimedwait 229
-__SYSCALL(229, sys_rt_sigtimedwait, 4)
-#define __NR_rt_sigqueueinfo 230
-__SYSCALL(230, sys_rt_sigqueueinfo, 3)
-#define __NR_rt_sigsuspend 231
-__SYSCALL(231, sys_rt_sigsuspend, 2)
-
-/* Message */
-
-#define __NR_mq_open 232
-__SYSCALL(232, sys_mq_open, 4)
-#define __NR_mq_unlink 233
-__SYSCALL(233, sys_mq_unlink, 1)
-#define __NR_mq_timedsend 234
-__SYSCALL(234, sys_mq_timedsend, 5)
-#define __NR_mq_timedreceive 235
-__SYSCALL(235, sys_mq_timedreceive, 5)
-#define __NR_mq_notify 236
-__SYSCALL(236, sys_mq_notify, 2)
-#define __NR_mq_getsetattr 237
-__SYSCALL(237, sys_mq_getsetattr, 3)
-#define __NR_available238 238
-__SYSCALL(238, sys_ni_syscall, 0)
-
-/* IO */
-
-#define __NR_io_setup 239
-__SYSCALL(239, sys_io_setup, 2)
-#define __NR_io_destroy 240
-__SYSCALL(240, sys_io_destroy, 1)
-#define __NR_io_submit 241
-__SYSCALL(241, sys_io_submit, 3)
-#define __NR_io_getevents 242
-__SYSCALL(242, sys_io_getevents, 5)
-#define __NR_io_cancel 243
-__SYSCALL(243, sys_io_cancel, 3)
-#define __NR_clock_settime 244
-__SYSCALL(244, sys_clock_settime, 2)
-#define __NR_clock_gettime 245
-__SYSCALL(245, sys_clock_gettime, 2)
-#define __NR_clock_getres 246
-__SYSCALL(246, sys_clock_getres, 2)
-#define __NR_clock_nanosleep 247
-__SYSCALL(247, sys_clock_nanosleep, 4)
-
-/* Timer */
-
-#define __NR_timer_create 248
-__SYSCALL(248, sys_timer_create, 3)
-#define __NR_timer_delete 249
-__SYSCALL(249, sys_timer_delete, 1)
-#define __NR_timer_settime 250
-__SYSCALL(250, sys_timer_settime, 4)
-#define __NR_timer_gettime 251
-__SYSCALL(251, sys_timer_gettime, 2)
-#define __NR_timer_getoverrun 252
-__SYSCALL(252, sys_timer_getoverrun, 1)
-
-/* System */
-
-#define __NR_reserved244 253
-__SYSCALL(253, sys_ni_syscall, 0)
-#define __NR_lookup_dcookie 254
-__SYSCALL(254, sys_lookup_dcookie, 4)
-#define __NR_available255 255
-__SYSCALL(255, sys_ni_syscall, 0)
-#define __NR_add_key 256
-__SYSCALL(256, sys_add_key, 5)
-#define __NR_request_key 257
-__SYSCALL(257, sys_request_key, 5)
-#define __NR_keyctl 258
-__SYSCALL(258, sys_keyctl, 5)
-#define __NR_available259 259
-__SYSCALL(259, sys_ni_syscall, 0)
-
-
-#define __NR_readahead 260
-__SYSCALL(260, sys_readahead, 5)
-#define __NR_remap_file_pages 261
-__SYSCALL(261, sys_remap_file_pages, 5)
-#define __NR_migrate_pages 262
-__SYSCALL(262, sys_migrate_pages, 0)
-#define __NR_mbind 263
-__SYSCALL(263, sys_mbind, 6)
-#define __NR_get_mempolicy 264
-__SYSCALL(264, sys_get_mempolicy, 5)
-#define __NR_set_mempolicy 265
-__SYSCALL(265, sys_set_mempolicy, 3)
-#define __NR_unshare 266
-__SYSCALL(266, sys_unshare, 1)
-#define __NR_move_pages 267
-__SYSCALL(267, sys_move_pages, 0)
-#define __NR_splice 268
-__SYSCALL(268, sys_splice, 0)
-#define __NR_tee 269
-__SYSCALL(269, sys_tee, 0)
-#define __NR_vmsplice 270
-__SYSCALL(270, sys_vmsplice, 0)
-#define __NR_available271 271
-__SYSCALL(271, sys_ni_syscall, 0)
-
-#define __NR_pselect6 272
-__SYSCALL(272, sys_pselect6, 0)
-#define __NR_ppoll 273
-__SYSCALL(273, sys_ppoll, 0)
-#define __NR_epoll_pwait 274
-__SYSCALL(274, sys_epoll_pwait, 0)
-#define __NR_available275 275
-__SYSCALL(275, sys_ni_syscall, 0)
-
-#define __NR_inotify_init 276
-__SYSCALL(276, sys_inotify_init, 0)
-#define __NR_inotify_add_watch 277
-__SYSCALL(277, sys_inotify_add_watch, 3)
-#define __NR_inotify_rm_watch 278
-__SYSCALL(278, sys_inotify_rm_watch, 2)
-#define __NR_available279 279
-__SYSCALL(279, sys_ni_syscall, 0)
-
-#define __NR_getcpu 280
-__SYSCALL(280, sys_getcpu, 0)
-#define __NR_kexec_load 281
-__SYSCALL(281, sys_ni_syscall, 0)
-
-#define __NR_ioprio_set 282
-__SYSCALL(282, sys_ioprio_set, 2)
-#define __NR_ioprio_get 283
-__SYSCALL(283, sys_ioprio_get, 3)
-
-#define __NR_set_robust_list 284
-__SYSCALL(284, sys_set_robust_list, 3)
-#define __NR_get_robust_list 285
-__SYSCALL(285, sys_get_robust_list, 3)
-#define __NR_reserved286 286 /* sync_file_rangeX */
-__SYSCALL(286, sys_ni_syscall, 3)
-#define __NR_available287 287
-__SYSCALL(287, sys_faccessat, 0)
-
-/* Relative File Operations */
-
-#define __NR_openat 288
-__SYSCALL(288, sys_openat, 4)
-#define __NR_mkdirat 289
-__SYSCALL(289, sys_mkdirat, 3)
-#define __NR_mknodat 290
-__SYSCALL(290, sys_mknodat, 4)
-#define __NR_unlinkat 291
-__SYSCALL(291, sys_unlinkat, 3)
-#define __NR_renameat 292
-__SYSCALL(292, sys_renameat, 4)
-#define __NR_linkat 293
-__SYSCALL(293, sys_linkat, 5)
-#define __NR_symlinkat 294
-__SYSCALL(294, sys_symlinkat, 3)
-#define __NR_readlinkat 295
-__SYSCALL(295, sys_readlinkat, 4)
-#define __NR_utimensat 296
-__SYSCALL(296, sys_utimensat, 0)
-#define __NR_fchownat 297
-__SYSCALL(297, sys_fchownat, 5)
-#define __NR_futimesat 298
-__SYSCALL(298, sys_futimesat, 4)
-#define __NR_fstatat64 299
-__SYSCALL(299, sys_fstatat64, 0)
-#define __NR_fchmodat 300
-__SYSCALL(300, sys_fchmodat, 4)
-#define __NR_faccessat 301
-__SYSCALL(301, sys_faccessat, 4)
-#define __NR_available302 302
-__SYSCALL(302, sys_ni_syscall, 0)
-#define __NR_available303 303
-__SYSCALL(303, sys_ni_syscall, 0)
-
-#define __NR_signalfd 304
-__SYSCALL(304, sys_signalfd, 3)
-/* 305 was __NR_timerfd */
-__SYSCALL(305, sys_ni_syscall, 0)
-#define __NR_eventfd 306
-__SYSCALL(306, sys_eventfd, 1)
-#define __NR_recvmmsg 307
-__SYSCALL(307, sys_recvmmsg, 5)
-#define __NR_setns 308
-__SYSCALL(308, sys_setns, 2)
-
-#define __NR_syscall_count 309
-
-/*
- * sysxtensa syscall handler
- *
- * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused);
- * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused);
- * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
- * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
- * a2 a6 a3 a4 a5
- */
-
-#define SYS_XTENSA_RESERVED 0 /* don't use this */
-#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */
-#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */
-#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */
-#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */
-
-#define SYS_XTENSA_COUNT 5 /* count */
-
-#ifdef __KERNEL__
/*
* "Conditional" syscalls
#define __IGNORE_mmap /* use mmap2 */
#define __IGNORE_vfork /* use clone */
#define __IGNORE_fadvise64 /* use fadvise64_64 */
-
-#endif /* __KERNEL__ */
-#endif /* _XTENSA_UNISTD_H */
+++ /dev/null
-/*
- * include/asm-xtensa/xor.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_XOR_H
-#define _XTENSA_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += auxvec.h
+header-y += byteorder.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += swab.h
+header-y += termbits.h
+header-y += types.h
+header-y += unistd.h
--- /dev/null
+#ifndef __XTENSA_AUXVEC_H
+#define __XTENSA_AUXVEC_H
+
+#endif
--- /dev/null
+#ifndef _XTENSA_BYTEORDER_H
+#define _XTENSA_BYTEORDER_H
+
+#ifdef __XTENSA_EL__
+#include <linux/byteorder/little_endian.h>
+#elif defined(__XTENSA_EB__)
+#include <linux/byteorder/big_endian.h>
+#else
+# error processor byte order undefined!
+#endif
+
+#endif /* _XTENSA_BYTEORDER_H */
--- /dev/null
+/*
+ * include/asm-xtensa/ioctls.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 - 2005 Tensilica Inc.
+ *
+ * Derived from "include/asm-i386/ioctls.h"
+ */
+
+#ifndef _XTENSA_IOCTLS_H
+#define _XTENSA_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX _IO('f', 1)
+#define FIONCLEX _IO('f', 2)
+#define FIOASYNC _IOW('f', 125, int)
+#define FIONBIO _IOW('f', 126, int)
+#define FIONREAD _IOR('f', 127, int)
+#define TIOCINQ FIONREAD
+#define FIOQSIZE _IOR('f', 128, loff_t)
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+
+#define TCGETA _IOR('t', 23, struct termio)
+#define TCSETA _IOW('t', 24, struct termio)
+#define TCSETAW _IOW('t', 25, struct termio)
+#define TCSETAF _IOW('t', 28, struct termio)
+
+#define TCSBRK _IO('t', 29)
+#define TCXONC _IO('t', 30)
+#define TCFLSH _IO('t', 31)
+
+#define TIOCSWINSZ _IOW('t', 103, struct winsize)
+#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
+#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
+#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
+
+#define TIOCSPGRP _IOW('t', 118, int)
+#define TIOCGPGRP _IOR('t', 119, int)
+
+#define TIOCEXCL _IO('T', 12)
+#define TIOCNXCL _IO('T', 13)
+#define TIOCSCTTY _IO('T', 14)
+
+#define TIOCSTI _IOW('T', 18, char)
+#define TIOCMGET _IOR('T', 21, unsigned int)
+#define TIOCMBIS _IOW('T', 22, unsigned int)
+#define TIOCMBIC _IOW('T', 23, unsigned int)
+#define TIOCMSET _IOW('T', 24, unsigned int)
+# define TIOCM_LE 0x001
+# define TIOCM_DTR 0x002
+# define TIOCM_RTS 0x004
+# define TIOCM_ST 0x008
+# define TIOCM_SR 0x010
+# define TIOCM_CTS 0x020
+# define TIOCM_CAR 0x040
+# define TIOCM_RNG 0x080
+# define TIOCM_DSR 0x100
+# define TIOCM_CD TIOCM_CAR
+# define TIOCM_RI TIOCM_RNG
+
+#define TIOCGSOFTCAR _IOR('T', 25, unsigned int)
+#define TIOCSSOFTCAR _IOW('T', 26, unsigned int)
+#define TIOCLINUX _IOW('T', 28, char)
+#define TIOCCONS _IO('T', 29)
+#define TIOCGSERIAL 0x803C541E /*_IOR('T', 30, struct serial_struct)*/
+#define TIOCSSERIAL 0x403C541F /*_IOW('T', 31, struct serial_struct)*/
+#define TIOCPKT _IOW('T', 32, int)
+# define TIOCPKT_DATA 0
+# define TIOCPKT_FLUSHREAD 1
+# define TIOCPKT_FLUSHWRITE 2
+# define TIOCPKT_STOP 4
+# define TIOCPKT_START 8
+# define TIOCPKT_NOSTOP 16
+# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
+
+
+#define TIOCNOTTY _IO('T', 34)
+#define TIOCSETD _IOW('T', 35, int)
+#define TIOCGETD _IOR('T', 36, int)
+#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/
+#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/
+#define TIOCSBRK _IO('T', 39) /* BSD compatibility */
+#define TIOCCBRK _IO('T', 40) /* BSD compatibility */
+#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/
+#define TCGETS2 _IOR('T', 42, struct termios2)
+#define TCSETS2 _IOW('T', 43, struct termios2)
+#define TCSETSW2 _IOW('T', 44, struct termios2)
+#define TCSETSF2 _IOW('T', 45, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
+#define TIOCVHANGUP _IO('T', 0x37)
+
+#define TIOCSERCONFIG _IO('T', 83)
+#define TIOCSERGWILD _IOR('T', 84, int)
+#define TIOCSERSWILD _IOW('T', 85, int)
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */
+ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */
+#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
+
+#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+
+#endif /* _XTENSA_IOCTLS_H */
--- /dev/null
+/*
+ * include/asm-xtensa/ipcbuf.h
+ *
+ * The ipc64_perm structure for the Xtensa architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_IPCBUF_H
+#define _XTENSA_IPCBUF_H
+
+/*
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned long seq;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _XTENSA_IPCBUF_H */
--- /dev/null
+/*
+ * include/asm-xtensa/mman.h
+ *
+ * Xtensa Processor memory-manager definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_MMAN_H
+#define _XTENSA_MMAN_H
+
+/*
+ * Protections are chosen from these bits, OR'd together. The
+ * implementation does not necessarily support PROT_EXEC or PROT_WRITE
+ * without PROT_READ. The only guarantees are that no writing will be
+ * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
+ */
+
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+
+#define PROT_SEM 0x10 /* page may be used for atomic ops */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */
+
+/*
+ * Flags for mmap
+ */
+#define MAP_SHARED 0x001 /* Share changes */
+#define MAP_PRIVATE 0x002 /* Changes are private */
+#define MAP_TYPE 0x00f /* Mask for type of mapping */
+#define MAP_FIXED 0x010 /* Interpret addr exactly */
+
+/* not used by linux, but here to make sure we don't clash with ABI defines */
+#define MAP_RENAME 0x020 /* Assign page to file */
+#define MAP_AUTOGROW 0x040 /* File may grow by writing */
+#define MAP_LOCAL 0x080 /* Copy on fork/sproc */
+#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */
+
+/* These are linux-specific */
+#define MAP_NORESERVE 0x0400 /* don't check for reservations */
+#define MAP_ANONYMOUS 0x0800 /* don't use a file */
+#define MAP_GROWSDOWN 0x1000 /* stack-like segment */
+#define MAP_DENYWRITE 0x2000 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */
+#define MAP_LOCKED 0x8000 /* pages are locked */
+#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x20000 /* do not block on IO */
+#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB 0x80000 /* create a huge page mapping */
+
+/*
+ * Flags for msync
+ */
+#define MS_ASYNC 0x0001 /* sync memory asynchronously */
+#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */
+#define MS_SYNC 0x0004 /* synchronous memory sync */
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#define MADV_NORMAL 0 /* no further special treatment */
+#define MADV_RANDOM 1 /* expect random page references */
+#define MADV_SEQUENTIAL 2 /* expect sequential page references */
+#define MADV_WILLNEED 3 /* will need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
+
+#define MADV_MERGEABLE 12 /* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE 14 /* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */
+
+#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump,
+ overrides the coredump filter bits */
+#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */
+
+/* compatibility flags */
+#define MAP_FILE 0
+
+#endif /* _XTENSA_MMAN_H */
--- /dev/null
+/*
+ * include/asm-xtensa/msgbuf.h
+ *
+ * The msqid64_ds structure for the Xtensa architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef _XTENSA_MSGBUF_H
+#define _XTENSA_MSGBUF_H
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+#ifdef __XTENSA_EB__
+ unsigned int __unused1;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned int __unused2;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned int __unused3;
+ __kernel_time_t msg_ctime; /* last change time */
+#elif defined(__XTENSA_EL__)
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned int __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned int __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned int __unused3;
+#else
+# error processor byte order undefined!
+#endif
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _XTENSA_MSGBUF_H */
--- /dev/null
+/*
+ * include/asm-xtensa/param.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _UAPI_XTENSA_PARAM_H
+#define _UAPI_XTENSA_PARAM_H
+
+#ifndef __KERNEL__
+# define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NGROUPS
+#define NGROUPS 32
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _UAPI_XTENSA_PARAM_H */
--- /dev/null
+/*
+ * include/asm-xtensa/poll.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_POLL_H
+#define _XTENSA_POLL_H
+
+#define POLLWRNORM POLLOUT
+#define POLLWRBAND 0x0100
+#define POLLREMOVE 0x0800
+
+#include <asm-generic/poll.h>
+
+#endif /* _XTENSA_POLL_H */
--- /dev/null
+/*
+ * include/asm-xtensa/posix_types.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Largely copied from include/asm-ppc/posix_types.h
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_POSIX_TYPES_H
+#define _XTENSA_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short __kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#define __kernel_size_t __kernel_size_t
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
+
+typedef unsigned short __kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _XTENSA_POSIX_TYPES_H */
--- /dev/null
+/*
+ * include/asm-xtensa/ptrace.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _UAPI_XTENSA_PTRACE_H
+#define _UAPI_XTENSA_PTRACE_H
+
+/*
+ * Kernel stack
+ *
+ * +-----------------------+ -------- STACK_SIZE
+ * | register file | |
+ * +-----------------------+ |
+ * | struct pt_regs | |
+ * +-----------------------+ | ------ PT_REGS_OFFSET
+ * double : 16 bytes spill area : | ^
+ * excetion :- - - - - - - - - - - -: | |
+ * frame : struct pt_regs : | |
+ * :- - - - - - - - - - - -: | |
+ * | | | |
+ * | memory stack | | |
+ * | | | |
+ * ~ ~ ~ ~
+ * ~ ~ ~ ~
+ * | | | |
+ * | | | |
+ * +-----------------------+ | | --- STACK_BIAS
+ * | struct task_struct | | | ^
+ * current --> +-----------------------+ | | |
+ * | struct thread_info | | | |
+ * +-----------------------+ --------
+ */
+
+#define KERNEL_STACK_SIZE (2 * PAGE_SIZE)
+
+/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */
+
+#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */
+#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */
+#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */
+#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */
+#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */
+#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */
+#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */
+#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */
+#define EXC_TABLE_SIZE 0x400
+
+/* Registers used by strace */
+
+#define REG_A_BASE 0x0000
+#define REG_AR_BASE 0x0100
+#define REG_PC 0x0020
+#define REG_PS 0x02e6
+#define REG_WB 0x0248
+#define REG_WS 0x0249
+#define REG_LBEG 0x0200
+#define REG_LEND 0x0201
+#define REG_LCOUNT 0x0202
+#define REG_SAR 0x0203
+
+#define SYSCALL_NR 0x00ff
+
+/* Other PTRACE_ values defined in <linux/ptrace.h> using values 0-9,16,17,24 */
+
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETXTREGS 18
+#define PTRACE_SETXTREGS 19
+
+
+#endif /* _UAPI_XTENSA_PTRACE_H */
--- /dev/null
+/*
+ * include/asm-xtensa/sembuf.h
+ *
+ * The semid64_ds structure for Xtensa architecture.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ */
+
+#ifndef _XTENSA_SEMBUF_H
+#define _XTENSA_SEMBUF_H
+
+#include <asm/byteorder.h>
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+#ifdef __XTENSA_EL__
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+#else
+ unsigned long __unused1;
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused2;
+ __kernel_time_t sem_ctime; /* last change time */
+#endif
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* __ASM_XTENSA_SEMBUF_H */
--- /dev/null
+/*
+ * include/asm-xtensa/setup.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SETUP_H
+#define _XTENSA_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+extern void set_except_vector(int n, void *addr);
+
+#endif
--- /dev/null
+/*
+ * include/asm-xtensa/shmbuf.h
+ *
+ * The shmid64_ds structure for Xtensa architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SHMBUF_H
+#define _XTENSA_SHMBUF_H
+
+#if defined (__XTENSA_EL__)
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+#elif defined (__XTENSA_EB__)
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+#else
+# error endian order not defined
+#endif
+
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _XTENSA_SHMBUF_H */
--- /dev/null
+/*
+ * include/asm-xtensa/sigcontext.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SIGCONTEXT_H
+#define _XTENSA_SIGCONTEXT_H
+
+
+struct sigcontext {
+ unsigned long sc_pc;
+ unsigned long sc_ps;
+ unsigned long sc_lbeg;
+ unsigned long sc_lend;
+ unsigned long sc_lcount;
+ unsigned long sc_sar;
+ unsigned long sc_acclo;
+ unsigned long sc_acchi;
+ unsigned long sc_a[16];
+ void *sc_xtregs;
+};
+
+#endif /* _XTENSA_SIGCONTEXT_H */
--- /dev/null
+/*
+ * include/asm-xtensa/signal.h
+ *
+ * Swiped from SH.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _UAPI_XTENSA_SIGNAL_H
+#define _UAPI_XTENSA_SIGNAL_H
+
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#endif
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/* #define SIGLOST 29 */
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#ifndef __ASSEMBLY__
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+/* Type of a signal handler. */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+#ifndef __KERNEL__
+
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_XTENSA_SIGNAL_H */
--- /dev/null
+/*
+ * include/asm-xtensa/socket.h
+ *
+ * Copied from i386.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _XTENSA_SOCKET_H
+#define _XTENSA_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
+#define SO_RXQ_OVFL 40
+
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+#define SO_PEEK_OFF 42
+
+/* Instruct lower device to use last 4-bytes of skb data as FCS */
+#define SO_NOFCS 43
+
+#endif /* _XTENSA_SOCKET_H */
--- /dev/null
+/*
+ * include/asm-xtensa/sockios.h
+ *
+ * Socket-level I/O control calls. Copied from MIPS.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SOCKIOS_H
+#define _XTENSA_SOCKIOS_H
+
+#include <asm/ioctl.h>
+
+/* Socket-level I/O control calls. */
+
+#define FIOGETOWN _IOR('f', 123, int)
+#define FIOSETOWN _IOW('f', 124, int)
+
+#define SIOCATMARK _IOR('s', 7, int)
+#define SIOCSPGRP _IOW('s', 8, pid_t)
+#define SIOCGPGRP _IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _XTENSA_SOCKIOS_H */
--- /dev/null
+/*
+ * include/asm-xtensa/stat.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_STAT_H
+#define _XTENSA_STAT_H
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned long st_rdev;
+ long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct stat64 {
+ unsigned long long st_dev; /* Device */
+ unsigned long long st_ino; /* File serial number */
+ unsigned int st_mode; /* File mode. */
+ unsigned int st_nlink; /* Link count. */
+ unsigned int st_uid; /* User ID of the file's owner. */
+ unsigned int st_gid; /* Group ID of the file's group. */
+ unsigned long long st_rdev; /* Device number, if device. */
+ long long st_size; /* Size of file, in bytes. */
+ unsigned long st_blksize; /* Optimal block size for I/O. */
+ unsigned long __unused2;
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long st_atime; /* Time of last access. */
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime; /* Time of last modification. */
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime; /* Time of last status change. */
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _XTENSA_STAT_H */
--- /dev/null
+/*
+ * include/asm-xtensa/swab.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_SWAB_H
+#define _XTENSA_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+ __u32 res;
+ /* instruction sequence from Xtensa ISA release 2/2000 */
+ __asm__("ssai 8 \n\t"
+ "srli %0, %1, 16 \n\t"
+ "src %0, %0, %1 \n\t"
+ "src %0, %0, %0 \n\t"
+ "src %0, %1, %0 \n"
+ : "=&a" (res)
+ : "a" (x)
+ );
+ return res;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+ /* Given that 'short' values are signed (i.e., can be negative),
+ * we cannot assume that the upper 16-bits of the register are
+ * zero. We are careful to mask values after shifting.
+ */
+
+ /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc
+ * inserts an extui instruction after putting this function inline
+ * to ensure that it uses only the least-significant 16 bits of
+ * the result. xt-xcc doesn't use an extui, but assumes the
+ * __asm__ macro follows convention that the upper 16 bits of an
+ * 'unsigned short' result are still zero. This macro doesn't
+ * follow convention; indeed, it leaves garbage in the upport 16
+ * bits of the register.
+
+ * Declaring the temporary variables 'res' and 'tmp' to be 32-bit
+ * types while the return type of the function is a 16-bit type
+ * forces both compilers to insert exactly one extui instruction
+ * (or equivalent) to mask off the upper 16 bits. */
+
+ __u32 res;
+ __u32 tmp;
+
+ __asm__("extui %1, %2, 8, 8\n\t"
+ "slli %0, %2, 8 \n\t"
+ "or %0, %0, %1 \n"
+ : "=&a" (res), "=&a" (tmp)
+ : "a" (x)
+ );
+
+ return res;
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* _XTENSA_SWAB_H */
--- /dev/null
+/*
+ * include/asm-xtensa/termbits.h
+ *
+ * Copied from SH.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_TERMBITS_H
+#define _XTENSA_TERMBITS_H
+
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+#define EXTPROC 0200000
+
+/* tcflow() and TCXONC use these */
+
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _XTENSA_TERMBITS_H */
--- /dev/null
+/*
+ * include/asm-xtensa/types.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _UAPI_XTENSA_TYPES_H
+#define _UAPI_XTENSA_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifdef __ASSEMBLY__
+# define __XTENSA_UL(x) (x)
+# define __XTENSA_UL_CONST(x) x
+#else
+# define __XTENSA_UL(x) ((unsigned long)(x))
+# define __XTENSA_UL_CONST(x) x##UL
+#endif
+
+#ifndef __ASSEMBLY__
+
+#endif
+
+#endif /* _UAPI_XTENSA_TYPES_H */
--- /dev/null
+/*
+ * include/asm-xtensa/unistd.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2012 Tensilica Inc.
+ */
+
+#ifndef _UAPI_XTENSA_UNISTD_H
+#define _UAPI_XTENSA_UNISTD_H
+
+#ifndef __SYSCALL
+# define __SYSCALL(nr,func,nargs)
+#endif
+
+#define __NR_spill 0
+__SYSCALL( 0, sys_ni_syscall, 0)
+#define __NR_xtensa 1
+__SYSCALL( 1, sys_ni_syscall, 0)
+#define __NR_available4 2
+__SYSCALL( 2, sys_ni_syscall, 0)
+#define __NR_available5 3
+__SYSCALL( 3, sys_ni_syscall, 0)
+#define __NR_available6 4
+__SYSCALL( 4, sys_ni_syscall, 0)
+#define __NR_available7 5
+__SYSCALL( 5, sys_ni_syscall, 0)
+#define __NR_available8 6
+__SYSCALL( 6, sys_ni_syscall, 0)
+#define __NR_available9 7
+__SYSCALL( 7, sys_ni_syscall, 0)
+
+/* File Operations */
+
+#define __NR_open 8
+__SYSCALL( 8, sys_open, 3)
+#define __NR_close 9
+__SYSCALL( 9, sys_close, 1)
+#define __NR_dup 10
+__SYSCALL( 10, sys_dup, 1)
+#define __NR_dup2 11
+__SYSCALL( 11, sys_dup2, 2)
+#define __NR_read 12
+__SYSCALL( 12, sys_read, 3)
+#define __NR_write 13
+__SYSCALL( 13, sys_write, 3)
+#define __NR_select 14
+__SYSCALL( 14, sys_select, 5)
+#define __NR_lseek 15
+__SYSCALL( 15, sys_lseek, 3)
+#define __NR_poll 16
+__SYSCALL( 16, sys_poll, 3)
+#define __NR__llseek 17
+__SYSCALL( 17, sys_llseek, 5)
+#define __NR_epoll_wait 18
+__SYSCALL( 18, sys_epoll_wait, 4)
+#define __NR_epoll_ctl 19
+__SYSCALL( 19, sys_epoll_ctl, 4)
+#define __NR_epoll_create 20
+__SYSCALL( 20, sys_epoll_create, 1)
+#define __NR_creat 21
+__SYSCALL( 21, sys_creat, 2)
+#define __NR_truncate 22
+__SYSCALL( 22, sys_truncate, 2)
+#define __NR_ftruncate 23
+__SYSCALL( 23, sys_ftruncate, 2)
+#define __NR_readv 24
+__SYSCALL( 24, sys_readv, 3)
+#define __NR_writev 25
+__SYSCALL( 25, sys_writev, 3)
+#define __NR_fsync 26
+__SYSCALL( 26, sys_fsync, 1)
+#define __NR_fdatasync 27
+__SYSCALL( 27, sys_fdatasync, 1)
+#define __NR_truncate64 28
+__SYSCALL( 28, sys_truncate64, 2)
+#define __NR_ftruncate64 29
+__SYSCALL( 29, sys_ftruncate64, 2)
+#define __NR_pread64 30
+__SYSCALL( 30, sys_pread64, 6)
+#define __NR_pwrite64 31
+__SYSCALL( 31, sys_pwrite64, 6)
+
+#define __NR_link 32
+__SYSCALL( 32, sys_link, 2)
+#define __NR_rename 33
+__SYSCALL( 33, sys_rename, 2)
+#define __NR_symlink 34
+__SYSCALL( 34, sys_symlink, 2)
+#define __NR_readlink 35
+__SYSCALL( 35, sys_readlink, 3)
+#define __NR_mknod 36
+__SYSCALL( 36, sys_mknod, 3)
+#define __NR_pipe 37
+__SYSCALL( 37, sys_pipe, 1)
+#define __NR_unlink 38
+__SYSCALL( 38, sys_unlink, 1)
+#define __NR_rmdir 39
+__SYSCALL( 39, sys_rmdir, 1)
+
+#define __NR_mkdir 40
+__SYSCALL( 40, sys_mkdir, 2)
+#define __NR_chdir 41
+__SYSCALL( 41, sys_chdir, 1)
+#define __NR_fchdir 42
+__SYSCALL( 42, sys_fchdir, 1)
+#define __NR_getcwd 43
+__SYSCALL( 43, sys_getcwd, 2)
+
+#define __NR_chmod 44
+__SYSCALL( 44, sys_chmod, 2)
+#define __NR_chown 45
+__SYSCALL( 45, sys_chown, 3)
+#define __NR_stat 46
+__SYSCALL( 46, sys_newstat, 2)
+#define __NR_stat64 47
+__SYSCALL( 47, sys_stat64, 2)
+
+#define __NR_lchown 48
+__SYSCALL( 48, sys_lchown, 3)
+#define __NR_lstat 49
+__SYSCALL( 49, sys_newlstat, 2)
+#define __NR_lstat64 50
+__SYSCALL( 50, sys_lstat64, 2)
+#define __NR_available51 51
+__SYSCALL( 51, sys_ni_syscall, 0)
+
+#define __NR_fchmod 52
+__SYSCALL( 52, sys_fchmod, 2)
+#define __NR_fchown 53
+__SYSCALL( 53, sys_fchown, 3)
+#define __NR_fstat 54
+__SYSCALL( 54, sys_newfstat, 2)
+#define __NR_fstat64 55
+__SYSCALL( 55, sys_fstat64, 2)
+
+#define __NR_flock 56
+__SYSCALL( 56, sys_flock, 2)
+#define __NR_access 57
+__SYSCALL( 57, sys_access, 2)
+#define __NR_umask 58
+__SYSCALL( 58, sys_umask, 1)
+#define __NR_getdents 59
+__SYSCALL( 59, sys_getdents, 3)
+#define __NR_getdents64 60
+__SYSCALL( 60, sys_getdents64, 3)
+#define __NR_fcntl64 61
+__SYSCALL( 61, sys_fcntl64, 3)
+#define __NR_fallocate 62
+__SYSCALL( 62, sys_fallocate, 6)
+#define __NR_fadvise64_64 63
+__SYSCALL( 63, xtensa_fadvise64_64, 6)
+#define __NR_utime 64 /* glibc 2.3.3 ?? */
+__SYSCALL( 64, sys_utime, 2)
+#define __NR_utimes 65
+__SYSCALL( 65, sys_utimes, 2)
+#define __NR_ioctl 66
+__SYSCALL( 66, sys_ioctl, 3)
+#define __NR_fcntl 67
+__SYSCALL( 67, sys_fcntl, 3)
+
+#define __NR_setxattr 68
+__SYSCALL( 68, sys_setxattr, 5)
+#define __NR_getxattr 69
+__SYSCALL( 69, sys_getxattr, 4)
+#define __NR_listxattr 70
+__SYSCALL( 70, sys_listxattr, 3)
+#define __NR_removexattr 71
+__SYSCALL( 71, sys_removexattr, 2)
+#define __NR_lsetxattr 72
+__SYSCALL( 72, sys_lsetxattr, 5)
+#define __NR_lgetxattr 73
+__SYSCALL( 73, sys_lgetxattr, 4)
+#define __NR_llistxattr 74
+__SYSCALL( 74, sys_llistxattr, 3)
+#define __NR_lremovexattr 75
+__SYSCALL( 75, sys_lremovexattr, 2)
+#define __NR_fsetxattr 76
+__SYSCALL( 76, sys_fsetxattr, 5)
+#define __NR_fgetxattr 77
+__SYSCALL( 77, sys_fgetxattr, 4)
+#define __NR_flistxattr 78
+__SYSCALL( 78, sys_flistxattr, 3)
+#define __NR_fremovexattr 79
+__SYSCALL( 79, sys_fremovexattr, 2)
+
+/* File Map / Shared Memory Operations */
+
+#define __NR_mmap2 80
+__SYSCALL( 80, sys_mmap_pgoff, 6)
+#define __NR_munmap 81
+__SYSCALL( 81, sys_munmap, 2)
+#define __NR_mprotect 82
+__SYSCALL( 82, sys_mprotect, 3)
+#define __NR_brk 83
+__SYSCALL( 83, sys_brk, 1)
+#define __NR_mlock 84
+__SYSCALL( 84, sys_mlock, 2)
+#define __NR_munlock 85
+__SYSCALL( 85, sys_munlock, 2)
+#define __NR_mlockall 86
+__SYSCALL( 86, sys_mlockall, 1)
+#define __NR_munlockall 87
+__SYSCALL( 87, sys_munlockall, 0)
+#define __NR_mremap 88
+__SYSCALL( 88, sys_mremap, 4)
+#define __NR_msync 89
+__SYSCALL( 89, sys_msync, 3)
+#define __NR_mincore 90
+__SYSCALL( 90, sys_mincore, 3)
+#define __NR_madvise 91
+__SYSCALL( 91, sys_madvise, 3)
+#define __NR_shmget 92
+__SYSCALL( 92, sys_shmget, 4)
+#define __NR_shmat 93
+__SYSCALL( 93, xtensa_shmat, 4)
+#define __NR_shmctl 94
+__SYSCALL( 94, sys_shmctl, 4)
+#define __NR_shmdt 95
+__SYSCALL( 95, sys_shmdt, 4)
+
+/* Socket Operations */
+
+#define __NR_socket 96
+__SYSCALL( 96, sys_socket, 3)
+#define __NR_setsockopt 97
+__SYSCALL( 97, sys_setsockopt, 5)
+#define __NR_getsockopt 98
+__SYSCALL( 98, sys_getsockopt, 5)
+#define __NR_shutdown 99
+__SYSCALL( 99, sys_shutdown, 2)
+
+#define __NR_bind 100
+__SYSCALL(100, sys_bind, 3)
+#define __NR_connect 101
+__SYSCALL(101, sys_connect, 3)
+#define __NR_listen 102
+__SYSCALL(102, sys_listen, 2)
+#define __NR_accept 103
+__SYSCALL(103, sys_accept, 3)
+
+#define __NR_getsockname 104
+__SYSCALL(104, sys_getsockname, 3)
+#define __NR_getpeername 105
+__SYSCALL(105, sys_getpeername, 3)
+#define __NR_sendmsg 106
+__SYSCALL(106, sys_sendmsg, 3)
+#define __NR_recvmsg 107
+__SYSCALL(107, sys_recvmsg, 3)
+#define __NR_send 108
+__SYSCALL(108, sys_send, 4)
+#define __NR_recv 109
+__SYSCALL(109, sys_recv, 4)
+#define __NR_sendto 110
+__SYSCALL(110, sys_sendto, 6)
+#define __NR_recvfrom 111
+__SYSCALL(111, sys_recvfrom, 6)
+
+#define __NR_socketpair 112
+__SYSCALL(112, sys_socketpair, 4)
+#define __NR_sendfile 113
+__SYSCALL(113, sys_sendfile, 4)
+#define __NR_sendfile64 114
+__SYSCALL(114, sys_sendfile64, 4)
+#define __NR_sendmmsg 115
+__SYSCALL(115, sys_sendmmsg, 4)
+
+/* Process Operations */
+
+#define __NR_clone 116
+__SYSCALL(116, xtensa_clone, 5)
+#define __NR_execve 117
+__SYSCALL(117, xtensa_execve, 3)
+#define __NR_exit 118
+__SYSCALL(118, sys_exit, 1)
+#define __NR_exit_group 119
+__SYSCALL(119, sys_exit_group, 1)
+#define __NR_getpid 120
+__SYSCALL(120, sys_getpid, 0)
+#define __NR_wait4 121
+__SYSCALL(121, sys_wait4, 4)
+#define __NR_waitid 122
+__SYSCALL(122, sys_waitid, 5)
+#define __NR_kill 123
+__SYSCALL(123, sys_kill, 2)
+#define __NR_tkill 124
+__SYSCALL(124, sys_tkill, 2)
+#define __NR_tgkill 125
+__SYSCALL(125, sys_tgkill, 3)
+#define __NR_set_tid_address 126
+__SYSCALL(126, sys_set_tid_address, 1)
+#define __NR_gettid 127
+__SYSCALL(127, sys_gettid, 0)
+#define __NR_setsid 128
+__SYSCALL(128, sys_setsid, 0)
+#define __NR_getsid 129
+__SYSCALL(129, sys_getsid, 1)
+#define __NR_prctl 130
+__SYSCALL(130, sys_prctl, 5)
+#define __NR_personality 131
+__SYSCALL(131, sys_personality, 1)
+#define __NR_getpriority 132
+__SYSCALL(132, sys_getpriority, 2)
+#define __NR_setpriority 133
+__SYSCALL(133, sys_setpriority, 3)
+#define __NR_setitimer 134
+__SYSCALL(134, sys_setitimer, 3)
+#define __NR_getitimer 135
+__SYSCALL(135, sys_getitimer, 2)
+#define __NR_setuid 136
+__SYSCALL(136, sys_setuid, 1)
+#define __NR_getuid 137
+__SYSCALL(137, sys_getuid, 0)
+#define __NR_setgid 138
+__SYSCALL(138, sys_setgid, 1)
+#define __NR_getgid 139
+__SYSCALL(139, sys_getgid, 0)
+#define __NR_geteuid 140
+__SYSCALL(140, sys_geteuid, 0)
+#define __NR_getegid 141
+__SYSCALL(141, sys_getegid, 0)
+#define __NR_setreuid 142
+__SYSCALL(142, sys_setreuid, 2)
+#define __NR_setregid 143
+__SYSCALL(143, sys_setregid, 2)
+#define __NR_setresuid 144
+__SYSCALL(144, sys_setresuid, 3)
+#define __NR_getresuid 145
+__SYSCALL(145, sys_getresuid, 3)
+#define __NR_setresgid 146
+__SYSCALL(146, sys_setresgid, 3)
+#define __NR_getresgid 147
+__SYSCALL(147, sys_getresgid, 3)
+#define __NR_setpgid 148
+__SYSCALL(148, sys_setpgid, 2)
+#define __NR_getpgid 149
+__SYSCALL(149, sys_getpgid, 1)
+#define __NR_getppid 150
+__SYSCALL(150, sys_getppid, 0)
+#define __NR_getpgrp 151
+__SYSCALL(151, sys_getpgrp, 0)
+
+#define __NR_reserved152 152 /* set_thread_area */
+__SYSCALL(152, sys_ni_syscall, 0)
+#define __NR_reserved153 153 /* get_thread_area */
+__SYSCALL(153, sys_ni_syscall, 0)
+#define __NR_times 154
+__SYSCALL(154, sys_times, 1)
+#define __NR_acct 155
+__SYSCALL(155, sys_acct, 1)
+#define __NR_sched_setaffinity 156
+__SYSCALL(156, sys_sched_setaffinity, 3)
+#define __NR_sched_getaffinity 157
+__SYSCALL(157, sys_sched_getaffinity, 3)
+#define __NR_capget 158
+__SYSCALL(158, sys_capget, 2)
+#define __NR_capset 159
+__SYSCALL(159, sys_capset, 2)
+#define __NR_ptrace 160
+__SYSCALL(160, sys_ptrace, 4)
+#define __NR_semtimedop 161
+__SYSCALL(161, sys_semtimedop, 5)
+#define __NR_semget 162
+__SYSCALL(162, sys_semget, 4)
+#define __NR_semop 163
+__SYSCALL(163, sys_semop, 4)
+#define __NR_semctl 164
+__SYSCALL(164, sys_semctl, 4)
+#define __NR_available165 165
+__SYSCALL(165, sys_ni_syscall, 0)
+#define __NR_msgget 166
+__SYSCALL(166, sys_msgget, 4)
+#define __NR_msgsnd 167
+__SYSCALL(167, sys_msgsnd, 4)
+#define __NR_msgrcv 168
+__SYSCALL(168, sys_msgrcv, 4)
+#define __NR_msgctl 169
+__SYSCALL(169, sys_msgctl, 4)
+#define __NR_available170 170
+__SYSCALL(170, sys_ni_syscall, 0)
+
+/* File System */
+
+#define __NR_umount2 171
+__SYSCALL(171, sys_umount, 2)
+#define __NR_mount 172
+__SYSCALL(172, sys_mount, 5)
+#define __NR_swapon 173
+__SYSCALL(173, sys_swapon, 2)
+#define __NR_chroot 174
+__SYSCALL(174, sys_chroot, 1)
+#define __NR_pivot_root 175
+__SYSCALL(175, sys_pivot_root, 2)
+#define __NR_umount 176
+__SYSCALL(176, sys_umount, 2)
+#define __NR_swapoff 177
+__SYSCALL(177, sys_swapoff, 1)
+#define __NR_sync 178
+__SYSCALL(178, sys_sync, 0)
+#define __NR_syncfs 179
+__SYSCALL(179, sys_syncfs, 1)
+#define __NR_setfsuid 180
+__SYSCALL(180, sys_setfsuid, 1)
+#define __NR_setfsgid 181
+__SYSCALL(181, sys_setfsgid, 1)
+#define __NR_sysfs 182
+__SYSCALL(182, sys_sysfs, 3)
+#define __NR_ustat 183
+__SYSCALL(183, sys_ustat, 2)
+#define __NR_statfs 184
+__SYSCALL(184, sys_statfs, 2)
+#define __NR_fstatfs 185
+__SYSCALL(185, sys_fstatfs, 2)
+#define __NR_statfs64 186
+__SYSCALL(186, sys_statfs64, 3)
+#define __NR_fstatfs64 187
+__SYSCALL(187, sys_fstatfs64, 3)
+
+/* System */
+
+#define __NR_setrlimit 188
+__SYSCALL(188, sys_setrlimit, 2)
+#define __NR_getrlimit 189
+__SYSCALL(189, sys_getrlimit, 2)
+#define __NR_getrusage 190
+__SYSCALL(190, sys_getrusage, 2)
+#define __NR_futex 191
+__SYSCALL(191, sys_futex, 5)
+#define __NR_gettimeofday 192
+__SYSCALL(192, sys_gettimeofday, 2)
+#define __NR_settimeofday 193
+__SYSCALL(193, sys_settimeofday, 2)
+#define __NR_adjtimex 194
+__SYSCALL(194, sys_adjtimex, 1)
+#define __NR_nanosleep 195
+__SYSCALL(195, sys_nanosleep, 2)
+#define __NR_getgroups 196
+__SYSCALL(196, sys_getgroups, 2)
+#define __NR_setgroups 197
+__SYSCALL(197, sys_setgroups, 2)
+#define __NR_sethostname 198
+__SYSCALL(198, sys_sethostname, 2)
+#define __NR_setdomainname 199
+__SYSCALL(199, sys_setdomainname, 2)
+#define __NR_syslog 200
+__SYSCALL(200, sys_syslog, 3)
+#define __NR_vhangup 201
+__SYSCALL(201, sys_vhangup, 0)
+#define __NR_uselib 202
+__SYSCALL(202, sys_uselib, 1)
+#define __NR_reboot 203
+__SYSCALL(203, sys_reboot, 3)
+#define __NR_quotactl 204
+__SYSCALL(204, sys_quotactl, 4)
+#define __NR_nfsservctl 205
+__SYSCALL(205, sys_ni_syscall, 0) /* old nfsservctl */
+#define __NR__sysctl 206
+__SYSCALL(206, sys_sysctl, 1)
+#define __NR_bdflush 207
+__SYSCALL(207, sys_bdflush, 2)
+#define __NR_uname 208
+__SYSCALL(208, sys_newuname, 1)
+#define __NR_sysinfo 209
+__SYSCALL(209, sys_sysinfo, 1)
+#define __NR_init_module 210
+__SYSCALL(210, sys_init_module, 2)
+#define __NR_delete_module 211
+__SYSCALL(211, sys_delete_module, 1)
+
+#define __NR_sched_setparam 212
+__SYSCALL(212, sys_sched_setparam, 2)
+#define __NR_sched_getparam 213
+__SYSCALL(213, sys_sched_getparam, 2)
+#define __NR_sched_setscheduler 214
+__SYSCALL(214, sys_sched_setscheduler, 3)
+#define __NR_sched_getscheduler 215
+__SYSCALL(215, sys_sched_getscheduler, 1)
+#define __NR_sched_get_priority_max 216
+__SYSCALL(216, sys_sched_get_priority_max, 1)
+#define __NR_sched_get_priority_min 217
+__SYSCALL(217, sys_sched_get_priority_min, 1)
+#define __NR_sched_rr_get_interval 218
+__SYSCALL(218, sys_sched_rr_get_interval, 2)
+#define __NR_sched_yield 219
+__SYSCALL(219, sys_sched_yield, 0)
+#define __NR_available222 222
+__SYSCALL(222, sys_ni_syscall, 0)
+
+/* Signal Handling */
+
+#define __NR_restart_syscall 223
+__SYSCALL(223, sys_restart_syscall, 0)
+#define __NR_sigaltstack 224
+__SYSCALL(224, xtensa_sigaltstack, 2)
+#define __NR_rt_sigreturn 225
+__SYSCALL(225, xtensa_rt_sigreturn, 1)
+#define __NR_rt_sigaction 226
+__SYSCALL(226, sys_rt_sigaction, 4)
+#define __NR_rt_sigprocmask 227
+__SYSCALL(227, sys_rt_sigprocmask, 4)
+#define __NR_rt_sigpending 228
+__SYSCALL(228, sys_rt_sigpending, 2)
+#define __NR_rt_sigtimedwait 229
+__SYSCALL(229, sys_rt_sigtimedwait, 4)
+#define __NR_rt_sigqueueinfo 230
+__SYSCALL(230, sys_rt_sigqueueinfo, 3)
+#define __NR_rt_sigsuspend 231
+__SYSCALL(231, sys_rt_sigsuspend, 2)
+
+/* Message */
+
+#define __NR_mq_open 232
+__SYSCALL(232, sys_mq_open, 4)
+#define __NR_mq_unlink 233
+__SYSCALL(233, sys_mq_unlink, 1)
+#define __NR_mq_timedsend 234
+__SYSCALL(234, sys_mq_timedsend, 5)
+#define __NR_mq_timedreceive 235
+__SYSCALL(235, sys_mq_timedreceive, 5)
+#define __NR_mq_notify 236
+__SYSCALL(236, sys_mq_notify, 2)
+#define __NR_mq_getsetattr 237
+__SYSCALL(237, sys_mq_getsetattr, 3)
+#define __NR_available238 238
+__SYSCALL(238, sys_ni_syscall, 0)
+
+/* IO */
+
+#define __NR_io_setup 239
+__SYSCALL(239, sys_io_setup, 2)
+#define __NR_io_destroy 240
+__SYSCALL(240, sys_io_destroy, 1)
+#define __NR_io_submit 241
+__SYSCALL(241, sys_io_submit, 3)
+#define __NR_io_getevents 242
+__SYSCALL(242, sys_io_getevents, 5)
+#define __NR_io_cancel 243
+__SYSCALL(243, sys_io_cancel, 3)
+#define __NR_clock_settime 244
+__SYSCALL(244, sys_clock_settime, 2)
+#define __NR_clock_gettime 245
+__SYSCALL(245, sys_clock_gettime, 2)
+#define __NR_clock_getres 246
+__SYSCALL(246, sys_clock_getres, 2)
+#define __NR_clock_nanosleep 247
+__SYSCALL(247, sys_clock_nanosleep, 4)
+
+/* Timer */
+
+#define __NR_timer_create 248
+__SYSCALL(248, sys_timer_create, 3)
+#define __NR_timer_delete 249
+__SYSCALL(249, sys_timer_delete, 1)
+#define __NR_timer_settime 250
+__SYSCALL(250, sys_timer_settime, 4)
+#define __NR_timer_gettime 251
+__SYSCALL(251, sys_timer_gettime, 2)
+#define __NR_timer_getoverrun 252
+__SYSCALL(252, sys_timer_getoverrun, 1)
+
+/* System */
+
+#define __NR_reserved253 253
+__SYSCALL(253, sys_ni_syscall, 0)
+#define __NR_lookup_dcookie 254
+__SYSCALL(254, sys_lookup_dcookie, 4)
+#define __NR_available255 255
+__SYSCALL(255, sys_ni_syscall, 0)
+#define __NR_add_key 256
+__SYSCALL(256, sys_add_key, 5)
+#define __NR_request_key 257
+__SYSCALL(257, sys_request_key, 5)
+#define __NR_keyctl 258
+__SYSCALL(258, sys_keyctl, 5)
+#define __NR_available259 259
+__SYSCALL(259, sys_ni_syscall, 0)
+
+
+#define __NR_readahead 260
+__SYSCALL(260, sys_readahead, 5)
+#define __NR_remap_file_pages 261
+__SYSCALL(261, sys_remap_file_pages, 5)
+#define __NR_migrate_pages 262
+__SYSCALL(262, sys_migrate_pages, 0)
+#define __NR_mbind 263
+__SYSCALL(263, sys_mbind, 6)
+#define __NR_get_mempolicy 264
+__SYSCALL(264, sys_get_mempolicy, 5)
+#define __NR_set_mempolicy 265
+__SYSCALL(265, sys_set_mempolicy, 3)
+#define __NR_unshare 266
+__SYSCALL(266, sys_unshare, 1)
+#define __NR_move_pages 267
+__SYSCALL(267, sys_move_pages, 0)
+#define __NR_splice 268
+__SYSCALL(268, sys_splice, 0)
+#define __NR_tee 269
+__SYSCALL(269, sys_tee, 0)
+#define __NR_vmsplice 270
+__SYSCALL(270, sys_vmsplice, 0)
+#define __NR_available271 271
+__SYSCALL(271, sys_ni_syscall, 0)
+
+#define __NR_pselect6 272
+__SYSCALL(272, sys_pselect6, 0)
+#define __NR_ppoll 273
+__SYSCALL(273, sys_ppoll, 0)
+#define __NR_epoll_pwait 274
+__SYSCALL(274, sys_epoll_pwait, 0)
+#define __NR_epoll_create1 275
+__SYSCALL(275, sys_epoll_create1, 1)
+
+#define __NR_inotify_init 276
+__SYSCALL(276, sys_inotify_init, 0)
+#define __NR_inotify_add_watch 277
+__SYSCALL(277, sys_inotify_add_watch, 3)
+#define __NR_inotify_rm_watch 278
+__SYSCALL(278, sys_inotify_rm_watch, 2)
+#define __NR_inotify_init1 279
+__SYSCALL(279, sys_inotify_init1, 1)
+
+#define __NR_getcpu 280
+__SYSCALL(280, sys_getcpu, 0)
+#define __NR_kexec_load 281
+__SYSCALL(281, sys_ni_syscall, 0)
+
+#define __NR_ioprio_set 282
+__SYSCALL(282, sys_ioprio_set, 2)
+#define __NR_ioprio_get 283
+__SYSCALL(283, sys_ioprio_get, 3)
+
+#define __NR_set_robust_list 284
+__SYSCALL(284, sys_set_robust_list, 3)
+#define __NR_get_robust_list 285
+__SYSCALL(285, sys_get_robust_list, 3)
+#define __NR_available286 286
+__SYSCALL(286, sys_ni_syscall, 0)
+#define __NR_available287 287
+__SYSCALL(287, sys_ni_syscall, 0)
+
+/* Relative File Operations */
+
+#define __NR_openat 288
+__SYSCALL(288, sys_openat, 4)
+#define __NR_mkdirat 289
+__SYSCALL(289, sys_mkdirat, 3)
+#define __NR_mknodat 290
+__SYSCALL(290, sys_mknodat, 4)
+#define __NR_unlinkat 291
+__SYSCALL(291, sys_unlinkat, 3)
+#define __NR_renameat 292
+__SYSCALL(292, sys_renameat, 4)
+#define __NR_linkat 293
+__SYSCALL(293, sys_linkat, 5)
+#define __NR_symlinkat 294
+__SYSCALL(294, sys_symlinkat, 3)
+#define __NR_readlinkat 295
+__SYSCALL(295, sys_readlinkat, 4)
+#define __NR_utimensat 296
+__SYSCALL(296, sys_utimensat, 0)
+#define __NR_fchownat 297
+__SYSCALL(297, sys_fchownat, 5)
+#define __NR_futimesat 298
+__SYSCALL(298, sys_futimesat, 4)
+#define __NR_fstatat64 299
+__SYSCALL(299, sys_fstatat64, 0)
+#define __NR_fchmodat 300
+__SYSCALL(300, sys_fchmodat, 4)
+#define __NR_faccessat 301
+__SYSCALL(301, sys_faccessat, 4)
+#define __NR_available302 302
+__SYSCALL(302, sys_ni_syscall, 0)
+#define __NR_available303 303
+__SYSCALL(303, sys_ni_syscall, 0)
+
+#define __NR_signalfd 304
+__SYSCALL(304, sys_signalfd, 3)
+/* 305 was __NR_timerfd */
+__SYSCALL(305, sys_ni_syscall, 0)
+#define __NR_eventfd 306
+__SYSCALL(306, sys_eventfd, 1)
+#define __NR_recvmmsg 307
+__SYSCALL(307, sys_recvmmsg, 5)
+
+#define __NR_setns 308
+__SYSCALL(308, sys_setns, 2)
+#define __NR_signalfd4 309
+__SYSCALL(309, sys_signalfd4, 4)
+#define __NR_dup3 310
+__SYSCALL(310, sys_dup3, 3)
+#define __NR_pipe2 311
+__SYSCALL(311, sys_pipe2, 2)
+
+#define __NR_timerfd_create 312
+__SYSCALL(312, sys_timerfd_create, 2)
+#define __NR_timerfd_settime 313
+__SYSCALL(313, sys_timerfd_settime, 4)
+#define __NR_timerfd_gettime 314
+__SYSCALL(314, sys_timerfd_gettime, 2)
+#define __NR_available315 315
+__SYSCALL(315, sys_ni_syscall, 0)
+
+#define __NR_eventfd2 316
+__SYSCALL(316, sys_eventfd2, 2)
+#define __NR_preadv 317
+__SYSCALL(317, sys_preadv, 5)
+#define __NR_pwritev 318
+__SYSCALL(318, sys_pwritev, 5)
+#define __NR_available319 319
+__SYSCALL(319, sys_ni_syscall, 0)
+
+#define __NR_fanotify_init 320
+__SYSCALL(320, sys_fanotify_init, 2)
+#define __NR_fanotify_mark 321
+__SYSCALL(321, sys_fanotify_mark, 6)
+#define __NR_process_vm_readv 322
+__SYSCALL(322, sys_process_vm_readv, 6)
+#define __NR_process_vm_writev 323
+__SYSCALL(323, sys_process_vm_writev, 6)
+
+#define __NR_name_to_handle_at 324
+__SYSCALL(324, sys_name_to_handle_at, 5)
+#define __NR_open_by_handle_at 325
+__SYSCALL(325, sys_open_by_handle_at, 3)
+#define __NR_sync_file_range 326
+__SYSCALL(326, sys_sync_file_range2, 6)
+#define __NR_perf_event_open 327
+__SYSCALL(327, sys_perf_event_open, 5)
+
+#define __NR_rt_tgsigqueueinfo 328
+__SYSCALL(328, sys_rt_tgsigqueueinfo, 4)
+#define __NR_clock_adjtime 329
+__SYSCALL(329, sys_clock_adjtime, 2)
+#define __NR_prlimit64 330
+__SYSCALL(330, sys_prlimit64, 4)
+#define __NR_kcmp 331
+__SYSCALL(331, sys_kcmp, 5)
+
+
+#define __NR_syscall_count 332
+
+/*
+ * sysxtensa syscall handler
+ *
+ * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
+ * a2 a6 a3 a4 a5
+ */
+
+#define SYS_XTENSA_RESERVED 0 /* don't use this */
+#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */
+#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */
+#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */
+#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */
+
+#define SYS_XTENSA_COUNT 5 /* count */
+
+#endif /* _UAPI_XTENSA_UNISTD_H */
s32i a7, a2, PT_AREG7
s32i a8, a2, PT_AREG8
- rsr a0, DEPC
- xsr a3, EXCSAVE_1
+ rsr a0, depc
+ xsr a3, excsave1
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
/* Keep value of SAR in a0 */
- rsr a0, SAR
- rsr a8, EXCVADDR # load unaligned memory address
+ rsr a0, sar
+ rsr a8, excvaddr # load unaligned memory address
/* Now, identify one of the following load/store instructions.
*
/* Extract the instruction that caused the unaligned access. */
- rsr a7, EPC_1 # load exception address
+ rsr a7, epc1 # load exception address
movi a3, ~3
and a3, a3, a7 # mask lower bits
1:
#if XCHAL_HAVE_LOOPS
- rsr a5, LEND # check if we reached LEND
+ rsr a5, lend # check if we reached LEND
bne a7, a5, 1f
- rsr a5, LCOUNT # and LCOUNT != 0
+ rsr a5, lcount # and LCOUNT != 0
beqz a5, 1f
addi a5, a5, -1 # decrement LCOUNT and set
- rsr a7, LBEG # set PC to LBEGIN
- wsr a5, LCOUNT
+ rsr a7, lbeg # set PC to LBEGIN
+ wsr a5, lcount
#endif
-1: wsr a7, EPC_1 # skip load instruction
+1: wsr a7, epc1 # skip load instruction
extui a4, a4, INSN_T, 4 # extract target register
movi a5, .Lload_table
addx8 a4, a4, a5
1:
#if XCHAL_HAVE_LOOPS
- rsr a4, LEND # check if we reached LEND
+ rsr a4, lend # check if we reached LEND
bne a7, a4, 1f
- rsr a4, LCOUNT # and LCOUNT != 0
+ rsr a4, lcount # and LCOUNT != 0
beqz a4, 1f
addi a4, a4, -1 # decrement LCOUNT and set
- rsr a7, LBEG # set PC to LBEGIN
- wsr a4, LCOUNT
+ rsr a7, lbeg # set PC to LBEGIN
+ wsr a4, lcount
#endif
-1: wsr a7, EPC_1 # skip store instruction
+1: wsr a7, epc1 # skip store instruction
movi a4, ~3
and a4, a4, a8 # align memory address
.Lexit:
movi a4, 0
- rsr a3, EXCSAVE_1
+ rsr a3, excsave1
s32i a4, a3, EXC_TABLE_FIXUP
/* Restore working register */
/* restore SAR and return */
- wsr a0, SAR
+ wsr a0, sar
l32i a0, a2, PT_AREG0
l32i a2, a2, PT_AREG2
rfe
l32i a6, a2, PT_AREG6
l32i a5, a2, PT_AREG5
l32i a4, a2, PT_AREG4
- wsr a0, SAR
+ wsr a0, sar
mov a1, a2
- rsr a0, PS
+ rsr a0, ps
bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
movi a0, _kernel_exception
/* IO protection is currently unsupported. */
ENTRY(fast_io_protect)
- wsr a0, EXCSAVE_1
+ wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
*/
ENTRY(fast_coprocessor_double)
- wsr a0, EXCSAVE_1
+ wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
/* Save remaining registers a1-a3 and SAR */
- xsr a3, EXCSAVE_1
+ xsr a3, excsave1
s32i a3, a2, PT_AREG3
- rsr a3, SAR
+ rsr a3, sar
s32i a1, a2, PT_AREG1
s32i a3, a2, PT_SAR
mov a1, a2
- rsr a2, DEPC
+ rsr a2, depc
s32i a2, a1, PT_AREG2
/*
/* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
- rsr a3, EXCCAUSE
+ rsr a3, exccause
addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
/* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1<<cp-index)*/
ssl a3 # SAR: 32 - coprocessor_number
movi a2, 1
- rsr a0, CPENABLE
+ rsr a0, cpenable
sll a2, a2
or a0, a0, a2
- wsr a0, CPENABLE
+ wsr a0, cpenable
rsync
/* Retrieve previous owner. (a3 still holds CP number) */
/* Note that only a0 and a1 were preserved. */
-2: rsr a3, EXCCAUSE
+2: rsr a3, exccause
addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
movi a0, coprocessor_owner
addx4 a0, a3, a0
l32i a0, a1, PT_SAR
l32i a3, a1, PT_AREG3
l32i a2, a1, PT_AREG2
- wsr a0, SAR
+ wsr a0, sar
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
/* Save a2, a3, and depc, restore excsave_1 and set SP. */
- xsr a3, EXCSAVE_1
- rsr a0, DEPC
+ xsr a3, excsave1
+ rsr a0, depc
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
/* Save SAR and turn off single stepping */
movi a2, 0
- rsr a3, SAR
- xsr a2, ICOUNTLEVEL
+ rsr a3, sar
+ xsr a2, icountlevel
s32i a3, a1, PT_SAR
s32i a2, a1, PT_ICOUNTLEVEL
/* Rotate ws so that the current windowbase is at bit0. */
/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
- rsr a2, WINDOWBASE
- rsr a3, WINDOWSTART
+ rsr a2, windowbase
+ rsr a3, windowstart
ssr a2
s32i a2, a1, PT_WINDOWBASE
s32i a3, a1, PT_WINDOWSTART
/* WINDOWBASE still in SAR! */
- rsr a2, SAR # original WINDOWBASE
+ rsr a2, sar # original WINDOWBASE
movi a3, 1
ssl a2
sll a3, a3
- wsr a3, WINDOWSTART # set corresponding WINDOWSTART bit
- wsr a2, WINDOWBASE # and WINDOWSTART
+ wsr a3, windowstart # set corresponding WINDOWSTART bit
+ wsr a2, windowbase # and WINDOWSTART
rsync
/* We are back to the original stack pointer (a1) */
/* Save a0, a2, a3, DEPC and set SP. */
- xsr a3, EXCSAVE_1 # restore a3, excsave_1
- rsr a0, DEPC # get a2
+ xsr a3, excsave1 # restore a3, excsave_1
+ rsr a0, depc # get a2
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
/* Save SAR and turn off single stepping */
movi a2, 0
- rsr a3, SAR
- xsr a2, ICOUNTLEVEL
+ rsr a3, sar
+ xsr a2, icountlevel
s32i a3, a1, PT_SAR
s32i a2, a1, PT_ICOUNTLEVEL
/* Rotate ws so that the current windowbase is at bit0. */
/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
- rsr a2, WINDOWBASE # don't need to save these, we only
- rsr a3, WINDOWSTART # need shifted windowstart: windowmask
+ rsr a2, windowbase # don't need to save these, we only
+ rsr a3, windowstart # need shifted windowstart: windowmask
ssr a2
slli a2, a3, 32-WSBITS
src a2, a3, a2
/* Save some registers, disable loops and clear the syscall flag. */
- rsr a2, DEBUGCAUSE
- rsr a3, EPC_1
+ rsr a2, debugcause
+ rsr a3, epc1
s32i a2, a1, PT_DEBUGCAUSE
s32i a3, a1, PT_PC
movi a2, -1
- rsr a3, EXCVADDR
+ rsr a3, excvaddr
s32i a2, a1, PT_SYSCALL
movi a2, 0
s32i a3, a1, PT_EXCVADDR
- xsr a2, LCOUNT
+ xsr a2, lcount
s32i a2, a1, PT_LCOUNT
/* It is now save to restore the EXC_TABLE_FIXUP variable. */
- rsr a0, EXCCAUSE
+ rsr a0, exccause
movi a3, 0
- rsr a2, EXCSAVE_1
+ rsr a2, excsave1
s32i a0, a1, PT_EXCCAUSE
s32i a3, a2, EXC_TABLE_FIXUP
* (interrupts disabled) and if this exception is not an interrupt.
*/
- rsr a3, PS
+ rsr a3, ps
addi a0, a0, -4
movi a2, 1
extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0]
moveqz a3, a2, a0 # a3 = 1 iff interrupt exception
movi a2, 1 << PS_WOE_BIT
or a3, a3, a2
- rsr a0, EXCCAUSE
- xsr a3, PS
+ rsr a0, exccause
+ xsr a3, ps
s32i a3, a1, PT_PS # save ps
- /* Save LBEG, LEND */
+ /* Save lbeg, lend */
- rsr a2, LBEG
- rsr a3, LEND
+ rsr a2, lbeg
+ rsr a3, lend
s32i a2, a1, PT_LBEG
s32i a3, a1, PT_LEND
load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
- wsr a3, PS /* disable interrupts */
+ wsr a3, ps /* disable interrupts */
_bbci.l a3, PS_UM_BIT, kernel_exception_exit
l32i a2, a1, PT_WINDOWBASE
l32i a3, a1, PT_WINDOWSTART
- wsr a1, DEPC # use DEPC as temp storage
- wsr a3, WINDOWSTART # restore WINDOWSTART
+ wsr a1, depc # use DEPC as temp storage
+ wsr a3, windowstart # restore WINDOWSTART
ssr a2 # preserve user's WB in the SAR
- wsr a2, WINDOWBASE # switch to user's saved WB
+ wsr a2, windowbase # switch to user's saved WB
rsync
- rsr a1, DEPC # restore stack pointer
+ rsr a1, depc # restore stack pointer
l32i a2, a1, PT_WMASK # register frames saved (in bits 4...9)
rotw -1 # we restore a4..a7
_bltui a6, 16, 1f # only have to restore current window?
/* Clear unrestored registers (don't leak anything to user-land */
-1: rsr a0, WINDOWBASE
- rsr a3, SAR
+1: rsr a0, windowbase
+ rsr a3, sar
sub a3, a0, a3
beqz a3, 2f
extui a3, a3, 0, WBBITS
/* Test WINDOWSTART now. If spilled, do the movsp */
- rsr a3, WINDOWSTART
+ rsr a3, windowstart
addi a0, a3, -1
and a3, a3, a0
_bnez a3, common_exception_exit
1: l32i a2, a1, PT_PC
l32i a3, a1, PT_SAR
- wsr a2, EPC_1
- wsr a3, SAR
+ wsr a2, epc1
+ wsr a3, sar
/* Restore LBEG, LEND, LCOUNT */
l32i a2, a1, PT_LBEG
l32i a3, a1, PT_LEND
- wsr a2, LBEG
+ wsr a2, lbeg
l32i a2, a1, PT_LCOUNT
- wsr a3, LEND
- wsr a2, LCOUNT
+ wsr a3, lend
+ wsr a2, lcount
/* We control single stepping through the ICOUNTLEVEL register. */
l32i a2, a1, PT_ICOUNTLEVEL
movi a3, -2
- wsr a2, ICOUNTLEVEL
- wsr a3, ICOUNT
+ wsr a2, icountlevel
+ wsr a3, icount
/* Check if it was double exception. */
l32i a1, a1, PT_AREG1
rfe
-1: wsr a0, DEPC
+1: wsr a0, depc
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
rfde
ENTRY(debug_exception)
- rsr a0, EPS + XCHAL_DEBUGLEVEL
+ rsr a0, SREG_EPS + XCHAL_DEBUGLEVEL
bbsi.l a0, PS_EXCM_BIT, 1f # exception mode
- /* Set EPC_1 and EXCCAUSE */
+ /* Set EPC1 and EXCCAUSE */
- wsr a2, DEPC # save a2 temporarily
- rsr a2, EPC + XCHAL_DEBUGLEVEL
- wsr a2, EPC_1
+ wsr a2, depc # save a2 temporarily
+ rsr a2, SREG_EPC + XCHAL_DEBUGLEVEL
+ wsr a2, epc1
movi a2, EXCCAUSE_MAPPED_DEBUG
- wsr a2, EXCCAUSE
+ wsr a2, exccause
/* Restore PS to the value before the debug exc but with PS.EXCM set.*/
movi a2, 1 << PS_EXCM_BIT
or a2, a0, a2
movi a0, debug_exception # restore a3, debug jump vector
- wsr a2, PS
- xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL
+ wsr a2, ps
+ xsr a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
/* Switch to kernel/user stack, restore jump vector, and save a0 */
movi a0, 0
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_DEPC # mark it as a regular exception
- xsr a0, DEPC
+ xsr a0, depc
s32i a3, a2, PT_AREG3
s32i a0, a2, PT_AREG2
mov a1, a2
j _kernel_exception
-2: rsr a2, EXCSAVE_1
+2: rsr a2, excsave1
l32i a2, a2, EXC_TABLE_KSTK # load kernel stack pointer
s32i a0, a2, PT_AREG0
movi a0, 0
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_DEPC
- xsr a0, DEPC
+ xsr a0, depc
s32i a3, a2, PT_AREG3
s32i a0, a2, PT_AREG2
mov a1, a2
movi a0, 1
movi a1, 0
- wsr a0, WINDOWSTART
- wsr a1, WINDOWBASE
+ wsr a0, windowstart
+ wsr a1, windowbase
rsync
movi a1, (1 << PS_WOE_BIT) | 1
- wsr a1, PS
+ wsr a1, ps
rsync
movi a1, init_task
l32i a0, a2, PT_DEPC
_bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double
- rsr a0, DEPC # get a2
+ rsr a0, depc # get a2
s32i a4, a2, PT_AREG4 # save a4 and
s32i a0, a2, PT_AREG2 # a2 to stack
/* Restore a3, excsave_1 */
- xsr a3, EXCSAVE_1 # make sure excsave_1 is valid for dbl.
- rsr a4, EPC_1 # get exception address
+ xsr a3, excsave1 # make sure excsave_1 is valid for dbl.
+ rsr a4, epc1 # get exception address
s32i a3, a2, PT_AREG3 # save a3 to stack
#ifdef ALLOCA_EXCEPTION_IN_IRAM
jx a3
.Lunhandled_double:
- wsr a0, EXCSAVE_1
+ wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
#endif
addi a4, a4, 3 # step over movsp
_EXTUI_MOVSP_DST(a0) # extract destination register
- wsr a4, EPC_1 # save new epc_1
+ wsr a4, epc1 # save new epc_1
_bnei a0, 1, 1f # no 'movsp a1, ax': jump
/* Skip syscall. */
- rsr a0, EPC_1
+ rsr a0, epc1
addi a0, a0, 3
- wsr a0, EPC_1
+ wsr a0, epc1
l32i a0, a2, PT_DEPC
bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
- rsr a0, DEPC # get syscall-nr
+ rsr a0, depc # get syscall-nr
_beqz a0, fast_syscall_spill_registers
_beqi a0, __NR_xtensa, fast_syscall_xtensa
/* Skip syscall. */
- rsr a0, EPC_1
+ rsr a0, epc1
addi a0, a0, 3
- wsr a0, EPC_1
+ wsr a0, epc1
l32i a0, a2, PT_DEPC
bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
- rsr a0, DEPC # get syscall-nr
+ rsr a0, depc # get syscall-nr
_beqz a0, fast_syscall_spill_registers
_beqi a0, __NR_xtensa, fast_syscall_xtensa
/* Restore all states. */
l32i a0, a2, PT_AREG0 # restore a0
- xsr a2, DEPC # restore a2, depc
- rsr a3, EXCSAVE_1
+ xsr a2, depc # restore a2, depc
+ rsr a3, excsave1
- wsr a0, EXCSAVE_1
+ wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
ENTRY(fast_syscall_xtensa)
- xsr a3, EXCSAVE_1 # restore a3, excsave1
+ xsr a3, excsave1 # restore a3, excsave1
s32i a7, a2, PT_AREG7 # we need an additional register
movi a7, 4 # sizeof(unsigned int)
movi a0, fast_syscall_spill_registers_fixup
s32i a0, a3, EXC_TABLE_FIXUP
- rsr a0, WINDOWBASE
+ rsr a0, windowbase
s32i a0, a3, EXC_TABLE_PARAM
/* Save a3 and SAR on stack. */
- rsr a0, SAR
- xsr a3, EXCSAVE_1 # restore a3 and excsave_1
+ rsr a0, sar
+ xsr a3, excsave1 # restore a3 and excsave_1
s32i a3, a2, PT_AREG3
s32i a4, a2, PT_AREG4
s32i a0, a2, PT_AREG5 # store SAR to PT_AREG5
l32i a3, a2, PT_AREG5
l32i a4, a2, PT_AREG4
l32i a0, a2, PT_AREG0
- wsr a3, SAR
+ wsr a3, sar
l32i a3, a2, PT_AREG3
/* Restore clobbered registers. */
fast_syscall_spill_registers_fixup:
- rsr a2, WINDOWBASE # get current windowbase (a2 is saved)
- xsr a0, DEPC # restore depc and a0
+ rsr a2, windowbase # get current windowbase (a2 is saved)
+ xsr a0, depc # restore depc and a0
ssl a2 # set shift (32 - WB)
/* We need to make sure the current registers (a0-a3) are preserved.
* in WS, so that the exception handlers save them to the task stack.
*/
- rsr a3, EXCSAVE_1 # get spill-mask
+ rsr a3, excsave1 # get spill-mask
slli a2, a3, 1 # shift left by one
slli a3, a2, 32-WSBITS
src a2, a2, a3 # a1 = xxwww1yyxxxwww1yy......
- wsr a2, WINDOWSTART # set corrected windowstart
+ wsr a2, windowstart # set corrected windowstart
movi a3, exc_table
l32i a2, a3, EXC_TABLE_DOUBLE_SAVE # restore a2
* excsave_1: a3
*/
- wsr a3, WINDOWBASE
+ wsr a3, windowbase
rsync
/* We are now in the original frame when we entered _spill_registers:
/* Jump to the exception handler. */
movi a3, exc_table
- rsr a0, EXCCAUSE
+ rsr a0, exccause
addx4 a0, a0, a3 # find entry in table
l32i a0, a0, EXC_TABLE_FAST_USER # load handler
jx a0
/* When we return here, all registers have been restored (a2: DEPC) */
- wsr a2, DEPC # exception address
+ wsr a2, depc # exception address
/* Restore fixup handler. */
- xsr a3, EXCSAVE_1
+ xsr a3, excsave1
movi a2, fast_syscall_spill_registers_fixup
s32i a2, a3, EXC_TABLE_FIXUP
- rsr a2, WINDOWBASE
+ rsr a2, windowbase
s32i a2, a3, EXC_TABLE_PARAM
l32i a2, a3, EXC_TABLE_KSTK
/* Load WB at the time the exception occurred. */
- rsr a3, SAR # WB is still in SAR
+ rsr a3, sar # WB is still in SAR
neg a3, a3
- wsr a3, WINDOWBASE
+ wsr a3, windowbase
rsync
/* Restore a3 and return. */
movi a3, exc_table
- xsr a3, EXCSAVE_1
+ xsr a3, excsave1
rfde
* Rotate ws right so that a4 = yyxxxwww1.
*/
- rsr a4, WINDOWBASE
- rsr a3, WINDOWSTART # a3 = xxxwww1yy
+ rsr a4, windowbase
+ rsr a3, windowstart # a3 = xxxwww1yy
ssr a4 # holds WB
slli a4, a3, WSBITS
or a3, a3, a4 # a3 = xxxwww1yyxxxwww1yy
/* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
- wsr a3, WINDOWSTART # save shifted windowstart
+ wsr a3, windowstart # save shifted windowstart
neg a4, a3
and a3, a4, a3 # first bit set from right: 000010000
sub a4, a3, a4 # WSBITS-a4:number of 0-bits from right
ssr a4 # save in SAR for later.
- rsr a3, WINDOWBASE
+ rsr a3, windowbase
add a3, a3, a4
- wsr a3, WINDOWBASE
+ wsr a3, windowbase
rsync
- rsr a3, WINDOWSTART
+ rsr a3, windowstart
srl a3, a3 # shift windowstart
/* WB is now just one frame below the oldest frame in the register
.Lexit: /* Done. Do the final rotation, set WS, and return. */
rotw 1
- rsr a3, WINDOWBASE
+ rsr a3, windowbase
ssl a3
movi a3, 1
sll a3, a3
- wsr a3, WINDOWSTART
+ wsr a3, windowstart
ret
.Lc4: s32e a4, a9, -16
* however, this condition is unrecoverable in kernel space.
*/
- rsr a0, PS
+ rsr a0, ps
_bbci.l a0, PS_UM_BIT, 1f
/* User space: Setup a dummy frame and kill application.
movi a0, 1
movi a1, 0
- wsr a0, WINDOWSTART
- wsr a1, WINDOWBASE
+ wsr a0, windowstart
+ wsr a1, windowbase
rsync
movi a0, 0
movi a3, exc_table
l32i a1, a3, EXC_TABLE_KSTK
- wsr a3, EXCSAVE_1
+ wsr a3, excsave1
movi a4, (1 << PS_WOE_BIT) | 1
- wsr a4, PS
+ wsr a4, ps
rsync
movi a6, SIGSEGV
1: /* Kernel space: PANIC! */
- wsr a0, EXCSAVE_1
+ wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0 # should not return
1: j 1b
/* We deliberately destroy a3 that holds the exception table. */
-8: rsr a3, EXCVADDR # fault address
+8: rsr a3, excvaddr # fault address
_PGD_OFFSET(a0, a3, a1)
l32i a0, a0, 0 # read pmdval
beqz a0, 2f
* pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY
*/
- movi a1, -PAGE_OFFSET
+ movi a1, (-PAGE_OFFSET) & 0xffffffff
add a0, a0, a1 # pmdval - PAGE_OFFSET
extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK
xor a0, a0, a1
*/
extui a3, a3, 28, 2 # addr. bit 28 and 29 0,1,2,3
- rsr a1, PTEVADDR
+ rsr a1, ptevaddr
addx2 a3, a3, a3 # -> 0,3,6,9
srli a1, a1, PAGE_SHIFT
extui a3, a3, 2, 2 # -> 0,0,1,2
l32i a0, a2, PT_AREG0
l32i a1, a2, PT_AREG1
l32i a2, a2, PT_DEPC
- xsr a3, EXCSAVE_1
+ xsr a3, excsave1
bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
/* Restore excsave1 and return. */
- rsr a2, DEPC
+ rsr a2, depc
rfe
/* Return from double exception. */
-1: xsr a2, DEPC
+1: xsr a2, depc
esync
rfde
/* Make sure the exception originated in the special functions */
movi a0, __tlbtemp_mapping_start
- rsr a3, EPC_1
+ rsr a3, epc1
bltu a3, a0, 2f
movi a0, __tlbtemp_mapping_end
bgeu a3, a0, 2f
/* Check if excvaddr was in one of the TLBTEMP_BASE areas. */
movi a3, TLBTEMP_BASE_1
- rsr a0, EXCVADDR
+ rsr a0, excvaddr
bltu a0, a3, 2f
addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
/* Check if we have to restore an ITLB mapping. */
movi a1, __tlbtemp_mapping_itlb
- rsr a3, EPC_1
+ rsr a3, epc1
sub a3, a3, a1
/* Calculate VPN */
2: /* Invalid PGD, default exception handling */
movi a3, exc_table
- rsr a1, DEPC
- xsr a3, EXCSAVE_1
+ rsr a1, depc
+ xsr a3, excsave1
s32i a1, a2, PT_AREG2
s32i a3, a2, PT_AREG3
mov a1, a2
- rsr a2, PS
+ rsr a2, ps
bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
l32i a0, a1, TASK_MM # tsk->mm
beqz a0, 9f
-8: rsr a1, EXCVADDR # fault address
+8: rsr a1, excvaddr # fault address
_PGD_OFFSET(a0, a1, a4)
l32i a0, a0, 0
beqz a0, 2f
movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
or a4, a4, a1
- rsr a1, EXCVADDR
+ rsr a1, excvaddr
s32i a4, a0, 0
/* We need to flush the cache if we have page coloring. */
/* Restore excsave1 and a3. */
- xsr a3, EXCSAVE_1
+ xsr a3, excsave1
bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
- rsr a2, DEPC
+ rsr a2, depc
rfe
/* Double exception. Restore FIXUP handler and return. */
-1: xsr a2, DEPC
+1: xsr a2, depc
esync
rfde
2: /* If there was a problem, handle fault in C */
- rsr a4, DEPC # still holds a2
- xsr a3, EXCSAVE_1
+ rsr a4, depc # still holds a2
+ xsr a3, excsave1
s32i a4, a2, PT_AREG2
s32i a3, a2, PT_AREG3
l32i a4, a2, PT_AREG4
mov a1, a2
- rsr a2, PS
+ rsr a2, ps
bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
/* Disable ints while we manipulate the stack pointer. */
movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL
- xsr a14, PS
- rsr a3, EXCSAVE_1
+ xsr a14, ps
+ rsr a3, excsave1
rsync
s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
l32i a3, a5, THREAD_CPENABLE
- xsr a3, CPENABLE
+ xsr a3, cpenable
s32i a3, a4, THREAD_CPENABLE
#endif
* we return from kernel space.
*/
- rsr a3, EXCSAVE_1 # exc_table
+ rsr a3, excsave1 # exc_table
movi a6, 0
addi a7, a5, PT_REGS_OFFSET
s32i a6, a3, EXC_TABLE_FIXUP
load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
- wsr a14, PS
+ wsr a14, ps
mov a2, a12 # return 'prev'
rsync
/* Disable interrupts and exceptions. */
movi a0, LOCKLEVEL
- wsr a0, PS
+ wsr a0, ps
/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
- wsr a2, EXCSAVE_1
+ wsr a2, excsave1
/* Start with a fresh windowbase and windowstart. */
movi a1, 1
movi a0, 0
- wsr a1, WINDOWSTART
- wsr a0, WINDOWBASE
+ wsr a1, windowstart
+ wsr a0, windowbase
rsync
/* Set a0 to 0 for the remaining initialization. */
/* Clear debugging registers. */
#if XCHAL_HAVE_DEBUG
- wsr a0, IBREAKENABLE
- wsr a0, ICOUNT
+ wsr a0, ibreakenable
+ wsr a0, icount
movi a1, 15
- wsr a0, ICOUNTLEVEL
+ wsr a0, icountlevel
.set _index, 0
.rept XCHAL_NUM_DBREAK - 1
- wsr a0, DBREAKC + _index
+ wsr a0, SREG_DBREAKC + _index
.set _index, _index + 1
.endr
#endif
/* Clear CCOUNT (not really necessary, but nice) */
- wsr a0, CCOUNT # not really necessary, but nice
+ wsr a0, ccount # not really necessary, but nice
/* Disable zero-loops. */
#if XCHAL_HAVE_LOOPS
- wsr a0, LCOUNT
+ wsr a0, lcount
#endif
/* Disable all timers. */
.set _index, 0
.rept XCHAL_NUM_TIMERS - 1
- wsr a0, CCOMPARE + _index
+ wsr a0, SREG_CCOMPARE + _index
.set _index, _index + 1
.endr
/* Interrupt initialization. */
movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
- wsr a0, INTENABLE
- wsr a2, INTCLEAR
+ wsr a0, intenable
+ wsr a2, intclear
/* Disable coprocessors. */
#if XCHAL_CP_NUM > 0
- wsr a0, CPENABLE
+ wsr a0, cpenable
#endif
/* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0
*/
movi a1, 1
- wsr a1, PS
+ wsr a1, ps
rsync
/* Initialize the caches.
addi a1, a1, KERNEL_STACK_SIZE
movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0
- wsr a2, PS # (enable reg-windows; progmode stack)
+ wsr a2, ps # (enable reg-windows; progmode stack)
rsync
/* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/
movi a2, debug_exception
- wsr a2, EXCSAVE + XCHAL_DEBUGLEVEL
+ wsr a2, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
/* Set up EXCSAVE[1] to point to the exc_table. */
movi a6, exc_table
- xsr a6, EXCSAVE_1
+ xsr a6, excsave1
/* init_arch kick-starts the linux kernel */
static void xtensa_irq_mask(struct irq_data *d)
{
cached_irq_mask &= ~(1 << d->irq);
- set_sr (cached_irq_mask, INTENABLE);
+ set_sr (cached_irq_mask, intenable);
}
static void xtensa_irq_unmask(struct irq_data *d)
{
cached_irq_mask |= 1 << d->irq;
- set_sr (cached_irq_mask, INTENABLE);
+ set_sr (cached_irq_mask, intenable);
}
static void xtensa_irq_enable(struct irq_data *d)
static void xtensa_irq_ack(struct irq_data *d)
{
- set_sr(1 << d->irq, INTCLEAR);
+ set_sr(1 << d->irq, intclear);
}
static int xtensa_irq_retrigger(struct irq_data *d)
*
* Note: This is a pristine frame, so we don't need any spill region on top of
* childregs.
+ *
+ * The fun part: if we're keeping the same VM (i.e. cloning a thread,
+ * not an entire process), we're normally given a new usp, and we CANNOT share
+ * any live address register windows. If we just copy those live frames over,
+ * the two threads (parent and child) will overflow the same frames onto the
+ * parent stack at different times, likely corrupting the parent stack (esp.
+ * if the parent returns from functions that called clone() and calls new
+ * ones, before the child overflows its now old copies of its parent windows).
+ * One solution is to spill windows to the parent stack, but that's fairly
+ * involved. Much simpler to just not copy those live frames across.
*/
int copy_thread(unsigned long clone_flags, unsigned long usp,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs *childregs;
- struct thread_info *ti;
unsigned long tos;
int user_mode = user_mode(regs);
+#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
+ struct thread_info *ti;
+#endif
+
/* Set up new TSS. */
tos = (unsigned long)task_stack_page(p) + THREAD_SIZE;
if (user_mode)
else
childregs = (struct pt_regs*)tos - 1;
+ /* This does not copy all the regs. In a bout of brilliance or madness,
+ ARs beyond a0-a15 exist past the end of the struct. */
*childregs = *regs;
/* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */
*((int*)childregs - 3) = (unsigned long)childregs;
*((int*)childregs - 4) = 0;
- childregs->areg[1] = tos;
childregs->areg[2] = 0;
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
if (user_mode(regs)) {
- int len = childregs->wmask & ~0xf;
childregs->areg[1] = usp;
- memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
- ®s->areg[XCHAL_NUM_AREGS - len/4], len);
+ if (clone_flags & CLONE_VM) {
+ childregs->wmask = 1; /* can't share live windows */
+ } else {
+ int len = childregs->wmask & ~0xf;
+ memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
+ ®s->areg[XCHAL_NUM_AREGS - len/4], len);
+ }
// FIXME: we need to set THREADPTR in thread_info...
if (clone_flags & CLONE_SETTLS)
childregs->areg[2] = childregs->areg[6];
} else {
/* In kernel space, we start a new thread with a new stack. */
childregs->wmask = 1;
+ childregs->areg[1] = tos;
}
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
} tagtable_t;
#define __tagtable(tag, fn) static tagtable_t __tagtable_##fn \
- __attribute__((unused, __section__(".taglist"))) = { tag, fn }
+ __attribute__((used, section(".taglist"))) = { tag, fn }
/* parse current tag */
}
sysmem.bank[sysmem.nr_banks].type = mi->type;
sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start);
- sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_SIZE;
+ sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_MASK;
sysmem.nr_banks++;
return 0;
#undef __SYSCALL
#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
-#undef _XTENSA_UNISTD_H
#undef __KERNEL_SYSCALLS__
#include <asm/unistd.h>
};
/* EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */
/* EXCCAUSE_PRIVILEGED unhandled */
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
-#ifdef CONFIG_UNALIGNED_USER
+#ifdef CONFIG_XTENSA_UNALIGNED_USER
{ EXCCAUSE_UNALIGNED, USER, fast_unaligned },
#else
{ EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
void do_interrupt (struct pt_regs *regs)
{
- unsigned long intread = get_sr (INTREAD);
- unsigned long intenable = get_sr (INTENABLE);
+ unsigned long intread = get_sr (interrupt);
+ unsigned long intenable = get_sr (intenable);
int i, mask;
/* Handle all interrupts (no priorities).
for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) {
if (mask & (intread & intenable)) {
- set_sr (mask, INTCLEAR);
+ set_sr (mask, intclear);
do_IRQ (i,regs);
}
}
*/
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
-#ifndef CONFIG_UNALIGNED_USER
+#ifndef CONFIG_XTENSA_UNALIGNED_USER
void
do_unaligned_user (struct pt_regs *regs)
{
/* Initialize EXCSAVE_1 to hold the address of the exception table. */
i = (unsigned long)exc_table;
- __asm__ __volatile__("wsr %0, "__stringify(EXCSAVE_1)"\n" : : "a" (i));
+ __asm__ __volatile__("wsr %0, excsave1\n" : : "a" (i));
}
/*
unsigned int a0, ps;
__asm__ __volatile__ (
- "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t"
+ "movi a14, " __stringify(PS_EXCM_BIT | 1) "\n\t"
"mov a12, a0\n\t"
- "rsr a13," __stringify(SAR) "\n\t"
- "xsr a14," __stringify(PS) "\n\t"
+ "rsr a13, sar\n\t"
+ "xsr a14, ps\n\t"
"movi a0, _spill_registers\n\t"
"rsync\n\t"
"callx0 a0\n\t"
"mov a0, a12\n\t"
- "wsr a13," __stringify(SAR) "\n\t"
- "wsr a14," __stringify(PS) "\n\t"
+ "wsr a13, sar\n\t"
+ "wsr a14, ps\n\t"
:: "a" (&a0), "a" (&ps)
: "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory");
}
ENTRY(_UserExceptionVector)
- xsr a3, EXCSAVE_1 # save a3 and get dispatch table
- wsr a2, DEPC # save a2
+ xsr a3, excsave1 # save a3 and get dispatch table
+ wsr a2, depc # save a2
l32i a2, a3, EXC_TABLE_KSTK # load kernel stack to a2
s32i a0, a2, PT_AREG0 # save a0 to ESF
- rsr a0, EXCCAUSE # retrieve exception cause
+ rsr a0, exccause # retrieve exception cause
s32i a0, a2, PT_DEPC # mark it as a regular exception
addx4 a0, a0, a3 # find entry in table
l32i a0, a0, EXC_TABLE_FAST_USER # load handler
ENTRY(_KernelExceptionVector)
- xsr a3, EXCSAVE_1 # save a3, and get dispatch table
- wsr a2, DEPC # save a2
+ xsr a3, excsave1 # save a3, and get dispatch table
+ wsr a2, depc # save a2
addi a2, a1, -16-PT_SIZE # adjust stack pointer
s32i a0, a2, PT_AREG0 # save a0 to ESF
- rsr a0, EXCCAUSE # retrieve exception cause
+ rsr a0, exccause # retrieve exception cause
s32i a0, a2, PT_DEPC # mark it as a regular exception
addx4 a0, a0, a3 # find entry in table
l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler address
/* Deliberately destroy excsave (don't assume it's value was valid). */
- wsr a3, EXCSAVE_1 # save a3
+ wsr a3, excsave1 # save a3
/* Check for kernel double exception (usually fatal). */
- rsr a3, PS
+ rsr a3, ps
_bbci.l a3, PS_UM_BIT, .Lksp
/* Check if we are currently handling a window exception. */
/* Note: We don't need to indicate that we enter a critical section. */
- xsr a0, DEPC # get DEPC, save a0
+ xsr a0, depc # get DEPC, save a0
movi a3, XCHAL_WINDOW_VECTORS_VADDR
_bltu a0, a3, .Lfixup
* Note: We can trash the current window frame (a0...a3) and depc!
*/
- wsr a2, DEPC # save stack pointer temporarily
- rsr a0, PS
+ wsr a2, depc # save stack pointer temporarily
+ rsr a0, ps
extui a0, a0, PS_OWB_SHIFT, 4
- wsr a0, WINDOWBASE
+ wsr a0, windowbase
rsync
/* We are now in the previous window frame. Save registers again. */
- xsr a2, DEPC # save a2 and get stack pointer
+ xsr a2, depc # save a2 and get stack pointer
s32i a0, a2, PT_AREG0
- wsr a3, EXCSAVE_1 # save a3
+ wsr a3, excsave1 # save a3
movi a3, exc_table
- rsr a0, EXCCAUSE
+ rsr a0, exccause
s32i a0, a2, PT_DEPC # mark it as a regular exception
addx4 a0, a0, a3
l32i a0, a0, EXC_TABLE_FAST_USER
/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */
- xsr a3, DEPC
+ xsr a3, depc
s32i a0, a2, PT_DEPC
s32i a3, a2, PT_AREG0
/* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */
movi a3, exc_table
- rsr a0, EXCCAUSE
+ rsr a0, exccause
addx4 a0, a0, a3
l32i a0, a0, EXC_TABLE_FAST_USER
jx a0
.Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
- rsr a3, EXCCAUSE
+ rsr a3, exccause
beqi a3, EXCCAUSE_ITLB_MISS, 1f
addi a3, a3, -EXCCAUSE_DTLB_MISS
bnez a3, .Lunrecoverable
.Lunrecoverable_fixup:
l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
- xsr a0, DEPC
+ xsr a0, depc
.Lunrecoverable:
- rsr a3, EXCSAVE_1
- wsr a0, EXCSAVE_1
+ rsr a3, excsave1
+ wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0
.section .DebugInterruptVector.text, "ax"
ENTRY(_DebugInterruptVector)
- xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL
+ xsr a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
jx a0
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2002 - 2005 Tensilica Inc.
+ * Copyright (C) 2002 - 2012 Tensilica Inc.
*/
#include <variant/core.h>
#endif
.endm
-
/*
* void *memcpy(void *dst, const void *src, size_t len);
- * void *memmove(void *dst, const void *src, size_t len);
- * void *bcopy(const void *src, void *dst, size_t len);
*
* This function is intended to do the same thing as the standard
- * library function memcpy() (or bcopy()) for most cases.
+ * library function memcpy() for most cases.
* However, where the source and/or destination references
* an instruction RAM or ROM or a data RAM or ROM, that
* source and/or destination will always be accessed with
* !!!!!!! Handling of IRAM/IROM has not yet
* !!!!!!! been implemented.
*
- * The bcopy version is provided here to avoid the overhead
- * of an extra call, for callers that require this convention.
- *
* The (general case) algorithm is as follows:
* If destination is unaligned, align it by conditionally
* copying 1 and 2 bytes.
*/
.text
- .align 4
- .global bcopy
- .type bcopy,@function
-bcopy:
- entry sp, 16 # minimal stack frame
- # a2=src, a3=dst, a4=len
- mov a5, a3 # copy dst so that a2 is return value
- mov a3, a2
- mov a2, a5
- j .Lcommon # go to common code for memcpy+bcopy
-
/*
* Byte by byte copy
s8i a6, a5, 0
addi a5, a5, 1
#if !XCHAL_HAVE_LOOPS
- blt a3, a7, .Lnextbyte
+ bne a3, a7, .Lnextbyte # continue loop if $a3:src != $a7:src_end
#endif /* !XCHAL_HAVE_LOOPS */
.Lbytecopydone:
retw
.global memcpy
.type memcpy,@function
memcpy:
- .global memmove
- .type memmove,@function
-memmove:
entry sp, 16 # minimal stack frame
# a2/ dst, a3/ src, a4/ len
s32i a7, a5, 12
addi a5, a5, 16
#if !XCHAL_HAVE_LOOPS
- blt a3, a8, .Loop1
+ bne a3, a8, .Loop1 # continue loop if a3:src != a8:src_end
#endif /* !XCHAL_HAVE_LOOPS */
.Loop1done:
bbci.l a4, 3, .L2
s32i a9, a5, 12
addi a5, a5, 16
#if !XCHAL_HAVE_LOOPS
- blt a3, a10, .Loop2
+ bne a3, a10, .Loop2 # continue loop if a3:src != a10:src_end
#endif /* !XCHAL_HAVE_LOOPS */
.Loop2done:
bbci.l a4, 3, .L12
l8ui a6, a3, 0
s8i a6, a5, 0
retw
+
+
+/*
+ * void bcopy(const void *src, void *dest, size_t n);
+ */
+ .align 4
+ .global bcopy
+ .type bcopy,@function
+bcopy:
+ entry sp, 16 # minimal stack frame
+ # a2=src, a3=dst, a4=len
+ mov a5, a3
+ mov a3, a2
+ mov a2, a5
+ j .Lmovecommon # go to common code for memmove+bcopy
+
+/*
+ * void *memmove(void *dst, const void *src, size_t len);
+ *
+ * This function is intended to do the same thing as the standard
+ * library function memmove() for most cases.
+ * However, where the source and/or destination references
+ * an instruction RAM or ROM or a data RAM or ROM, that
+ * source and/or destination will always be accessed with
+ * 32-bit load and store instructions (as required for these
+ * types of devices).
+ *
+ * !!!!!!! XTFIXME:
+ * !!!!!!! Handling of IRAM/IROM has not yet
+ * !!!!!!! been implemented.
+ *
+ * The (general case) algorithm is as follows:
+ * If end of source doesn't overlap destination then use memcpy.
+ * Otherwise do memcpy backwards.
+ *
+ * Register use:
+ * a0/ return address
+ * a1/ stack pointer
+ * a2/ return value
+ * a3/ src
+ * a4/ length
+ * a5/ dst
+ * a6/ tmp
+ * a7/ tmp
+ * a8/ tmp
+ * a9/ tmp
+ * a10/ tmp
+ * a11/ tmp
+ */
+
+/*
+ * Byte by byte copy
+ */
+ .align 4
+ .byte 0 # 1 mod 4 alignment for LOOPNEZ
+ # (0 mod 4 alignment for LBEG)
+.Lbackbytecopy:
+#if XCHAL_HAVE_LOOPS
+ loopnez a4, .Lbackbytecopydone
+#else /* !XCHAL_HAVE_LOOPS */
+ beqz a4, .Lbackbytecopydone
+ sub a7, a3, a4 # a7 = start address for source
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lbacknextbyte:
+ addi a3, a3, -1
+ l8ui a6, a3, 0
+ addi a5, a5, -1
+ s8i a6, a5, 0
+#if !XCHAL_HAVE_LOOPS
+ bne a3, a7, .Lbacknextbyte # continue loop if
+ # $a3:src != $a7:src_start
+#endif /* !XCHAL_HAVE_LOOPS */
+.Lbackbytecopydone:
+ retw
+
+/*
+ * Destination is unaligned
+ */
+
+ .align 4
+.Lbackdst1mod2: # dst is only byte aligned
+ _bltui a4, 7, .Lbackbytecopy # do short copies byte by byte
+
+ # copy 1 byte
+ addi a3, a3, -1
+ l8ui a6, a3, 0
+ addi a5, a5, -1
+ s8i a6, a5, 0
+ addi a4, a4, -1
+ _bbci.l a5, 1, .Lbackdstaligned # if dst is now aligned, then
+ # return to main algorithm
+.Lbackdst2mod4: # dst 16-bit aligned
+ # copy 2 bytes
+ _bltui a4, 6, .Lbackbytecopy # do short copies byte by byte
+ addi a3, a3, -2
+ l8ui a6, a3, 0
+ l8ui a7, a3, 1
+ addi a5, a5, -2
+ s8i a6, a5, 0
+ s8i a7, a5, 1
+ addi a4, a4, -2
+ j .Lbackdstaligned # dst is now aligned,
+ # return to main algorithm
+
+ .align 4
+ .global memmove
+ .type memmove,@function
+memmove:
+
+ entry sp, 16 # minimal stack frame
+ # a2/ dst, a3/ src, a4/ len
+ mov a5, a2 # copy dst so that a2 is return value
+.Lmovecommon:
+ sub a6, a5, a3
+ bgeu a6, a4, .Lcommon
+
+ add a5, a5, a4
+ add a3, a3, a4
+
+ _bbsi.l a5, 0, .Lbackdst1mod2 # if dst is 1 mod 2
+ _bbsi.l a5, 1, .Lbackdst2mod4 # if dst is 2 mod 4
+.Lbackdstaligned: # return here from .Lbackdst?mod? once dst is aligned
+ srli a7, a4, 4 # number of loop iterations with 16B
+ # per iteration
+ movi a8, 3 # if source is not aligned,
+ _bany a3, a8, .Lbacksrcunaligned # then use shifting copy
+ /*
+ * Destination and source are word-aligned, use word copy.
+ */
+ # copy 16 bytes per iteration for word-aligned dst and word-aligned src
+#if XCHAL_HAVE_LOOPS
+ loopnez a7, .backLoop1done
+#else /* !XCHAL_HAVE_LOOPS */
+ beqz a7, .backLoop1done
+ slli a8, a7, 4
+ sub a8, a3, a8 # a8 = start of first 16B source chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.backLoop1:
+ addi a3, a3, -16
+ l32i a7, a3, 12
+ l32i a6, a3, 8
+ addi a5, a5, -16
+ s32i a7, a5, 12
+ l32i a7, a3, 4
+ s32i a6, a5, 8
+ l32i a6, a3, 0
+ s32i a7, a5, 4
+ s32i a6, a5, 0
+#if !XCHAL_HAVE_LOOPS
+ bne a3, a8, .backLoop1 # continue loop if a3:src != a8:src_start
+#endif /* !XCHAL_HAVE_LOOPS */
+.backLoop1done:
+ bbci.l a4, 3, .Lback2
+ # copy 8 bytes
+ addi a3, a3, -8
+ l32i a6, a3, 0
+ l32i a7, a3, 4
+ addi a5, a5, -8
+ s32i a6, a5, 0
+ s32i a7, a5, 4
+.Lback2:
+ bbsi.l a4, 2, .Lback3
+ bbsi.l a4, 1, .Lback4
+ bbsi.l a4, 0, .Lback5
+ retw
+.Lback3:
+ # copy 4 bytes
+ addi a3, a3, -4
+ l32i a6, a3, 0
+ addi a5, a5, -4
+ s32i a6, a5, 0
+ bbsi.l a4, 1, .Lback4
+ bbsi.l a4, 0, .Lback5
+ retw
+.Lback4:
+ # copy 2 bytes
+ addi a3, a3, -2
+ l16ui a6, a3, 0
+ addi a5, a5, -2
+ s16i a6, a5, 0
+ bbsi.l a4, 0, .Lback5
+ retw
+.Lback5:
+ # copy 1 byte
+ addi a3, a3, -1
+ l8ui a6, a3, 0
+ addi a5, a5, -1
+ s8i a6, a5, 0
+ retw
+
+/*
+ * Destination is aligned, Source is unaligned
+ */
+
+ .align 4
+.Lbacksrcunaligned:
+ _beqz a4, .Lbackdone # avoid loading anything for zero-length copies
+ # copy 16 bytes per iteration for word-aligned dst and unaligned src
+ ssa8 a3 # set shift amount from byte offset
+#define SIM_CHECKS_ALIGNMENT 1 /* set to 1 when running on ISS with
+ * the lint or ferret client, or 0
+ * to save a few cycles */
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
+ and a11, a3, a8 # save unalignment offset for below
+ sub a3, a3, a11 # align a3
+#endif
+ l32i a6, a3, 0 # load first word
+#if XCHAL_HAVE_LOOPS
+ loopnez a7, .backLoop2done
+#else /* !XCHAL_HAVE_LOOPS */
+ beqz a7, .backLoop2done
+ slli a10, a7, 4
+ sub a10, a3, a10 # a10 = start of first 16B source chunk
+#endif /* !XCHAL_HAVE_LOOPS */
+.backLoop2:
+ addi a3, a3, -16
+ l32i a7, a3, 12
+ l32i a8, a3, 8
+ addi a5, a5, -16
+ src_b a6, a7, a6
+ s32i a6, a5, 12
+ l32i a9, a3, 4
+ src_b a7, a8, a7
+ s32i a7, a5, 8
+ l32i a6, a3, 0
+ src_b a8, a9, a8
+ s32i a8, a5, 4
+ src_b a9, a6, a9
+ s32i a9, a5, 0
+#if !XCHAL_HAVE_LOOPS
+ bne a3, a10, .backLoop2 # continue loop if a3:src != a10:src_start
+#endif /* !XCHAL_HAVE_LOOPS */
+.backLoop2done:
+ bbci.l a4, 3, .Lback12
+ # copy 8 bytes
+ addi a3, a3, -8
+ l32i a7, a3, 4
+ l32i a8, a3, 0
+ addi a5, a5, -8
+ src_b a6, a7, a6
+ s32i a6, a5, 4
+ src_b a7, a8, a7
+ s32i a7, a5, 0
+ mov a6, a8
+.Lback12:
+ bbci.l a4, 2, .Lback13
+ # copy 4 bytes
+ addi a3, a3, -4
+ l32i a7, a3, 0
+ addi a5, a5, -4
+ src_b a6, a7, a6
+ s32i a6, a5, 0
+ mov a6, a7
+.Lback13:
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
+ add a3, a3, a11 # readjust a3 with correct misalignment
+#endif
+ bbsi.l a4, 1, .Lback14
+ bbsi.l a4, 0, .Lback15
+.Lbackdone:
+ retw
+.Lback14:
+ # copy 2 bytes
+ addi a3, a3, -2
+ l8ui a6, a3, 0
+ l8ui a7, a3, 1
+ addi a5, a5, -2
+ s8i a6, a5, 0
+ s8i a7, a5, 1
+ bbsi.l a4, 0, .Lback15
+ retw
+.Lback15:
+ # copy 1 byte
+ addi a3, a3, -1
+ addi a5, a5, -1
+ l8ui a6, a3, 0
+ s8i a6, a5, 0
+ retw
+
\f
/*
* Local Variables:
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2010 Tensilica Inc.
*
* Chris Zankel <chris@zankel.net>
* Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
bad_page_fault(regs, address, SIGBUS);
+ return;
vmalloc_fault:
{
{
/* see drivers/char/serialX.c to reference original version */
- __simc (SYS_write, 1, (unsigned long)buf, count, 0, 0);
+ simc_write(1, buf, count);
return count;
}
static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
- char buf[2];
-
- buf[0] = ch;
- buf[1] = '\0'; /* Is this NULL necessary? */
- __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
- return 1;
+ return rs_write(tty, &ch, 1);
}
static void rs_flush_chars(struct tty_struct *tty)
return ret;
}
-static inline int simc_open(char *file, int flags, int mode)
+static inline int simc_open(const char *file, int flags, int mode)
{
+ wmb();
return __simc(SYS_open, (int) file, flags, mode, 0, 0);
}
static inline int simc_ioctl(int fd, int request, void *arg)
{
+ wmb();
return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0);
}
static inline int simc_read(int fd, void *buf, size_t count)
{
+ rmb();
return __simc(SYS_read, fd, (int) buf, count, 0, 0);
}
-static inline int simc_write(int fd, void *buf, size_t count)
+static inline int simc_write(int fd, const void *buf, size_t count)
{
+ wmb();
return __simc(SYS_write, fd, (int) buf, count, 0, 0);
}
{
struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
+ wmb();
return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv,
0, 0);
}
* jump to the reset vector. */
__asm__ __volatile__("movi a2, 15\n\t"
- "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t"
+ "wsr a2, icountlevel\n\t"
"movi a2, 0\n\t"
- "wsr a2, " __stringify(ICOUNT) "\n\t"
- "wsr a2, " __stringify(IBREAKENABLE) "\n\t"
- "wsr a2, " __stringify(LCOUNT) "\n\t"
+ "wsr a2, icount\n\t"
+ "wsr a2, ibreakenable\n\t"
+ "wsr a2, lcount\n\t"
"movi a2, 0x1f\n\t"
- "wsr a2, " __stringify(PS) "\n\t"
+ "wsr a2, ps\n\t"
"isync\n\t"
"jx %0\n\t"
:
* jump to the reset vector. */
__asm__ __volatile__ ("movi a2, 15\n\t"
- "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t"
+ "wsr a2, icountlevel\n\t"
"movi a2, 0\n\t"
- "wsr a2, " __stringify(ICOUNT) "\n\t"
- "wsr a2, " __stringify(IBREAKENABLE) "\n\t"
- "wsr a2, " __stringify(LCOUNT) "\n\t"
+ "wsr a2, icount\n\t"
+ "wsr a2, ibreakenable\n\t"
+ "wsr a2, lcount\n\t"
"movi a2, 0x1f\n\t"
- "wsr a2, " __stringify(PS) "\n\t"
+ "wsr a2, ps\n\t"
"isync\n\t"
"jx %0\n\t"
:
* firmware_map_add() or firmware_map_add_early() afterwards, the entries
* are not added to sysfs.
*/
-static int __init memmap_init(void)
+static int __init firmware_memmap_init(void)
{
struct firmware_map_entry *entry;
return 0;
}
-late_initcall(memmap_init);
+late_initcall(firmware_memmap_init);
u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
u &= ~(1 << pin);
writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip));
+ break;
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_LEVEL_LOW:
u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
u |= 1 << pin;
writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip));
+ break;
case IRQ_TYPE_EDGE_BOTH: {
u32 v;
else
u &= ~(1 << pin); /* rising */
writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip));
+ break;
}
}
return 0;
{ "CPU N455", 100000 },
{ "CPU N470", 100000 },
{ "CPU N475", 100000 },
- { "CPU 230", 100000 },
- { "CPU 330", 125000 },
+ { "CPU 230", 100000 }, /* Model 0x1c, stepping 2 */
+ { "CPU 330", 125000 }, /* Model 0x1c, stepping 2 */
+ { "CPU CE4110", 110000 }, /* Model 0x1c, stepping 10 */
+ { "CPU CE4150", 110000 }, /* Model 0x1c, stepping 10 */
+ { "CPU CE4170", 110000 }, /* Model 0x1c, stepping 10 */
};
static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
menuconfig PMBUS
tristate "PMBus support"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
default n
help
Say yes here if you want to enable PMBus support.
sharpsl_pcmcia_init_reset(skt);
}
-static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
+static struct pcmcia_low_level sharpsl_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
.socket_state = sharpsl_pcmcia_socket_state,
SCp->buffers_residual, suffix);
}
+#ifdef CHECK_STRUCTURE
static void fas216_dumpinfo(FAS216_Info *info)
{
static int used = 0;
info->internal_done, info->magic_end);
}
-#ifdef CHECK_STRUCTURE
static void __fas216_checkmagic(FAS216_Info *info, const char *func)
{
int corruption = 0;
/*#define PSEUDO_DMA*/
#define OAKSCSI_PUBLIC_RELEASE 1
+#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_local_declare() void __iomem *_base
struct s3c64xx_spi_dma_data {
unsigned ch;
- enum dma_data_direction direction;
+ enum dma_transfer_direction direction;
enum dma_ch dmach;
struct property *dma_prop;
};
if (tx) {
dma_data = &sdd->tx_dma;
- dma_data->direction = DMA_TO_DEVICE;
+ dma_data->direction = DMA_MEM_TO_DEV;
chan_str = "tx";
} else {
dma_data = &sdd->rx_dma;
- dma_data->direction = DMA_FROM_DEVICE;
+ dma_data->direction = DMA_DEV_TO_MEM;
chan_str = "rx";
}
#include <linux/sched.h>
#include <asm/unaligned.h>
#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
#include "dgrp_common.h"
#include <linux/proc_fs.h>
#include <linux/ctype.h>
#include <linux/seq_file.h>
+#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include "dgrp_common.h"
int len;
mode_t mode;
+ if (table == NULL)
+ return;
+
for (; table->id; table++) {
/* Can't do anything without a proc name. */
if (!table->name)
struct proc_dir_entry *de;
struct nd_struct *tmp;
+ if (table == NULL)
+ return;
+
list_for_each_entry(tmp, &nd_struct_list, list) {
if ((table == dgrp_net_table) && (tmp->nd_net_de)) {
unregister_dgrp_device(tmp->nd_net_de);
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sched.h>
+#include <linux/uaccess.h>
#include "dgrp_common.h"
*/
nd->nd_serial_ttdriver = alloc_tty_driver(CHAN_MAX);
+ if (!nd->nd_serial_ttdriver)
+ return -ENOMEM;
+
sprintf(nd->nd_serial_name, "tty_dgrp_%s_", id);
nd->nd_serial_ttdriver->owner = THIS_MODULE;
}
nd->nd_callout_ttdriver = alloc_tty_driver(CHAN_MAX);
+ if (!nd->nd_callout_ttdriver)
+ return -ENOMEM;
+
sprintf(nd->nd_callout_name, "cu_dgrp_%s_", id);
nd->nd_callout_ttdriver->owner = THIS_MODULE;
nd->nd_xprint_ttdriver = alloc_tty_driver(CHAN_MAX);
+ if (!nd->nd_xprint_ttdriver)
+ return -ENOMEM;
+
sprintf(nd->nd_xprint_name, "pr_dgrp_%s_", id);
nd->nd_xprint_ttdriver->owner = THIS_MODULE;
static int __devinit hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int line;
#ifdef CONFIG_SERIAL_8250_CONSOLE
memset(&uart, 0, sizeof(uart));
/* Memory mapped I/O */
- port.iotype = UPIO_MEM;
- port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
- port.irq = d->ipl;
- port.uartclk = HPDCA_BAUD_BASE * 16;
- port.mapbase = (d->resource.start + UART_OFFSET);
- port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
- port.regshift = 1;
- port.dev = &d->dev;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ uart.port.irq = d->ipl;
+ uart.port.uartclk = HPDCA_BAUD_BASE * 16;
+ uart.port.mapbase = (d->resource.start + UART_OFFSET);
+ uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE);
+ uart.port.regshift = 1;
+ uart.port.dev = &d->dev;
line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
- " irq %d failed\n", d->scode, port.irq);
+ " irq %d failed\n", d->scode, uart.port.irq);
return -ENOMEM;
}
Support for Console on SC2681/SC2692 serial ports.
config SERIAL_SCCNXP
- bool "SCCNXP serial port support"
+ tristate "SCCNXP serial port support"
depends on !SERIAL_SC26XX
select SERIAL_CORE
default n
config SERIAL_SCCNXP_CONSOLE
bool "Console on SCCNXP serial port"
- depends on SERIAL_SCCNXP
+ depends on SERIAL_SCCNXP=y
select SERIAL_CORE_CONSOLE
help
Support for console on SCCNXP serial ports.
{ "sc28202", SCCNXP_TYPE_SC28202 },
{ "sc68681", SCCNXP_TYPE_SC68681 },
{ "sc68692", SCCNXP_TYPE_SC68692 },
+ { },
};
MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
2500000, 3000000, 3500000, 4000000
};
-static const __u8 acm_tty_size[] = {
- 5, 6, 7, 8
-};
-
static void acm_tty_set_termios(struct tty_struct *tty,
struct ktermios *termios_old)
{
newline.bParityType = termios->c_cflag & PARENB ?
(termios->c_cflag & PARODD ? 1 : 2) +
(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
- newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ newline.bDataBits = 5;
+ break;
+ case CS6:
+ newline.bDataBits = 6;
+ break;
+ case CS7:
+ newline.bDataBits = 7;
+ break;
+ case CS8:
+ default:
+ newline.bDataBits = 8;
+ break;
+ }
/* FIXME: Needs to clear unsupported bits in the termios */
acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
if (usb_endpoint_xfer_int(epwrite))
usb_fill_int_urb(snd->urb, usb_dev,
- usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ usb_sndintpipe(usb_dev, epwrite->bEndpointAddress),
NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
else
usb_fill_bulk_urb(snd->urb, usb_dev,
ret = -EFAULT;
goto error;
}
+ uurb->buffer += u;
}
totlen -= u;
}
intf->condition = USB_INTERFACE_UNBOUND;
usb_cancel_queued_reset(intf);
+ /* If the LPM disable succeeded, balance the ref counts. */
+ if (!lpm_disable_error)
+ usb_unlocked_enable_lpm(udev);
+
/* Unbound interfaces are always runtime-PM-disabled and -suspended */
if (driver->supports_autosuspend)
pm_runtime_disable(dev);
(state == USB3_LPM_U2 &&
(u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
- dev_dbg(&udev->dev, "Device-initiated %s disabled due "
- "to long SEL %llu ms or PEL %llu ms\n",
+ dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n",
usb3_lpm_names[state], u1_sel, u1_pel);
return -EINVAL;
}
}
if (enable) {
- /*
- * First, let the device know about the exit latencies
- * associated with the link state we're about to enable.
- */
- ret = usb_req_set_sel(udev, state);
- if (ret < 0) {
- dev_warn(&udev->dev, "Set SEL for device-initiated "
- "%s failed.\n", usb3_lpm_names[state]);
- return -EBUSY;
- }
/*
* Now send the control transfer to enable device-initiated LPM
* for either U1 or U2.
static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
enum usb3_link_state state)
{
- int timeout;
+ int timeout, ret;
+ __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat;
+ __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat;
+
+ /* If the device says it doesn't have *any* exit latency to come out of
+ * U1 or U2, it's probably lying. Assume it doesn't implement that link
+ * state.
+ */
+ if ((state == USB3_LPM_U1 && u1_mel == 0) ||
+ (state == USB3_LPM_U2 && u2_mel == 0))
+ return;
+
+ /*
+ * First, let the device know about the exit latencies
+ * associated with the link state we're about to enable.
+ */
+ ret = usb_req_set_sel(udev, state);
+ if (ret < 0) {
+ dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n",
+ usb3_lpm_names[state]);
+ return;
+ }
/* We allow the host controller to set the U1/U2 timeout internally
* first, so that it can change its schedule to account for the
{
dwc3_event_buffers_cleanup(dwc);
dwc3_free_event_buffers(dwc);
+
+ usb_phy_shutdown(dwc->usb2_phy);
+ usb_phy_shutdown(dwc->usb3_phy);
+
}
#define DWC3_ALIGN_MASK (16 - 1)
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
WARN_ON_ONCE(ret);
dep->resource_index = 0;
-
+ dep->flags &= ~DWC3_EP_BUSY;
udelay(100);
}
config USB_G_WEBCAM
tristate "USB Webcam Gadget"
depends on VIDEO_DEV
+ select USB_LIBCOMPOSITE
help
The Webcam Gadget acts as a composite USB Audio and Video Class
device. It provides a userspace API to process UVC control requests
/* Get the VBUS status from the transceiver */
value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_2);
+ ISP1301_I2C_INTERRUPT_SOURCE);
/* VBUS on or off? */
- if (value & OTG_B_SESS_VLD)
+ if (value & INT_SESS_VLD)
udc->vbus = 1;
else
udc->vbus = 0;
if (pdata->controller_ver < 0) {
dev_warn(hcd->self.controller, "Could not get controller version\n");
- return;
+ return -ENODEV;
}
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-static void __init
+static void __devinit
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
{
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
+static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32);
+
static int vt8500_ehci_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
if (usb_disabled())
return -ENODEV;
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &vt8500_ehci_dma_mask;
+
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
.hub_control = uhci_hub_control,
};
+static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
{
if (usb_disabled())
return -ENODEV;
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &platform_uhci_dma_mask;
+
hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
pdev->name);
if (!hcd)
if (strstr(dmi_product_name, "Z420") ||
strstr(dmi_product_name, "Z620") ||
- strstr(dmi_product_name, "Z820"))
+ strstr(dmi_product_name, "Z820") ||
+ strstr(dmi_product_name, "Z1"))
return true;
return false;
ret = IRQ_HANDLED;
}
+ /* Drop spurious RX and TX if device is disconnected */
+ if (musb->int_usb & MUSB_INTR_DISCONNECT) {
+ musb->int_tx = 0;
+ musb->int_rx = 0;
+ }
+
if (musb->int_tx || musb->int_rx || musb->int_usb)
ret |= musb_interrupt(musb);
usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
- usbhs_write(priv, BRDYSTS, 0);
- usbhs_write(priv, NRDYSTS, 0);
- usbhs_write(priv, BEMPSTS, 0);
+ usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+ usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
+ usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
/*
* call irq callback functions
* pipe list
*/
#define __usbhs_for_each_pipe(start, pos, info, i) \
- for (i = start, pos = (info)->pipe; \
+ for (i = start, pos = (info)->pipe + i; \
i < (info)->size; \
i++, pos = (info)->pipe + i)
static int ark3116_attach(struct usb_serial *serial)
{
- struct usb_serial_port *port = serial->port[0];
- struct ark3116_private *priv;
-
/* make sure we have our end-points */
if ((serial->num_bulk_in == 0) ||
(serial->num_bulk_out == 0) ||
return -EINVAL;
}
- priv = kzalloc(sizeof(struct ark3116_private),
- GFP_KERNEL);
+ return 0;
+}
+
+static int ark3116_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct ark3116_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
return 0;
}
-static void ark3116_release(struct usb_serial *serial)
+static int ark3116_port_remove(struct usb_serial_port *port)
{
- struct usb_serial_port *port = serial->port[0];
struct ark3116_private *priv = usb_get_serial_port_data(port);
/* device is closed, so URBs and DMA should be down */
-
- usb_set_serial_port_data(port, NULL);
-
mutex_destroy(&priv->hw_lock);
-
kfree(priv);
+
+ return 0;
}
static void ark3116_init_termios(struct tty_struct *tty)
.id_table = id_table,
.num_ports = 1,
.attach = ark3116_attach,
- .release = ark3116_release,
+ .port_probe = ark3116_port_probe,
+ .port_remove = ark3116_port_remove,
.set_termios = ark3116_set_termios,
.init_termios = ark3116_init_termios,
.ioctl = ark3116_ioctl,
#define DRIVER_DESC "USB Belkin Serial converter driver"
/* function prototypes for a Belkin USB Serial Adapter F5U103 */
-static int belkin_sa_startup(struct usb_serial *serial);
-static void belkin_sa_release(struct usb_serial *serial);
+static int belkin_sa_port_probe(struct usb_serial_port *port);
+static int belkin_sa_port_remove(struct usb_serial_port *port);
static int belkin_sa_open(struct tty_struct *tty,
struct usb_serial_port *port);
static void belkin_sa_close(struct usb_serial_port *port);
.break_ctl = belkin_sa_break_ctl,
.tiocmget = belkin_sa_tiocmget,
.tiocmset = belkin_sa_tiocmset,
- .attach = belkin_sa_startup,
- .release = belkin_sa_release,
+ .port_probe = belkin_sa_port_probe,
+ .port_remove = belkin_sa_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
(c), BELKIN_SA_SET_REQUEST_TYPE, \
(v), 0, NULL, 0, WDR_TIMEOUT)
-/* do some startup allocations not currently performed by usb_serial_probe() */
-static int belkin_sa_startup(struct usb_serial *serial)
+static int belkin_sa_port_probe(struct usb_serial_port *port)
{
- struct usb_device *dev = serial->dev;
+ struct usb_device *dev = port->serial->dev;
struct belkin_sa_private *priv;
- /* allocate the private data structure */
priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
if (!priv)
- return -1; /* error */
- /* set initial values for control structures */
+ return -ENOMEM;
+
spin_lock_init(&priv->lock);
priv->control_state = 0;
priv->last_lsr = 0;
le16_to_cpu(dev->descriptor.bcdDevice),
priv->bad_flow_control);
- init_waitqueue_head(&serial->port[0]->write_wait);
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
return 0;
}
-static void belkin_sa_release(struct usb_serial *serial)
+static int belkin_sa_port_remove(struct usb_serial_port *port)
{
- int i;
+ struct belkin_sa_private *priv;
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
static int belkin_sa_open(struct tty_struct *tty,
MODULE_DEVICE_TABLE(usb, id_table);
-struct cp210x_port_private {
+struct cp210x_serial_private {
__u8 bInterfaceNumber;
};
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+ struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
__le32 *buf;
int result, i, length;
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
+ spriv->bInterfaceNumber, buf, size,
USB_CTRL_GET_TIMEOUT);
/* Convert data into an array of integers */
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+ struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
__le32 *buf;
int result, i, length;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
+ spriv->bInterfaceNumber, buf, size,
USB_CTRL_SET_TIMEOUT);
} else {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_INTERFACE, data[0],
- port_priv->bInterfaceNumber, NULL, 0,
+ spriv->bInterfaceNumber, NULL, 0,
USB_CTRL_SET_TIMEOUT);
}
static int cp210x_startup(struct usb_serial *serial)
{
- struct cp210x_port_private *port_priv;
- int i;
+ struct usb_host_interface *cur_altsetting;
+ struct cp210x_serial_private *spriv;
/* cp210x buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
- if (!port_priv)
- return -ENOMEM;
+ spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+ if (!spriv)
+ return -ENOMEM;
- port_priv->bInterfaceNumber =
- serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ cur_altsetting = serial->interface->cur_altsetting;
+ spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
- usb_set_serial_port_data(serial->port[i], port_priv);
- }
+ usb_set_serial_data(serial, spriv);
return 0;
}
static void cp210x_release(struct usb_serial *serial)
{
- struct cp210x_port_private *port_priv;
- int i;
+ struct cp210x_serial_private *spriv;
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = usb_get_serial_port_data(serial->port[i]);
- kfree(port_priv);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
+ spriv = usb_get_serial_data(serial);
+ kfree(spriv);
}
module_usb_serial_driver(serial_drivers, id_table);
#define CYBERJACK_PRODUCT_ID 0x0100
/* Function prototypes */
-static int cyberjack_startup(struct usb_serial *serial);
static void cyberjack_disconnect(struct usb_serial *serial);
-static void cyberjack_release(struct usb_serial *serial);
+static int cyberjack_port_probe(struct usb_serial_port *port);
+static int cyberjack_port_remove(struct usb_serial_port *port);
static int cyberjack_open(struct tty_struct *tty,
struct usb_serial_port *port);
static void cyberjack_close(struct usb_serial_port *port);
.description = "Reiner SCT Cyberjack USB card reader",
.id_table = id_table,
.num_ports = 1,
- .attach = cyberjack_startup,
.disconnect = cyberjack_disconnect,
- .release = cyberjack_release,
+ .port_probe = cyberjack_port_probe,
+ .port_remove = cyberjack_port_remove,
.open = cyberjack_open,
.close = cyberjack_close,
.write = cyberjack_write,
short wrsent; /* Data already sent */
};
-/* do some startup allocations not currently performed by usb_serial_probe() */
-static int cyberjack_startup(struct usb_serial *serial)
+static int cyberjack_port_probe(struct usb_serial_port *port)
{
struct cyberjack_private *priv;
- int i;
+ int result;
- /* allocate the private data structure */
priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- /* set initial values */
spin_lock_init(&priv->lock);
priv->rdtodo = 0;
priv->wrfilled = 0;
priv->wrsent = 0;
- usb_set_serial_port_data(serial->port[0], priv);
- init_waitqueue_head(&serial->port[0]->write_wait);
+ usb_set_serial_port_data(port, priv);
- for (i = 0; i < serial->num_ports; ++i) {
- int result;
- result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
- GFP_KERNEL);
- if (result)
- dev_err(&serial->dev->dev,
- "usb_submit_urb(read int) failed\n");
- dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n",
- __func__);
- }
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
return 0;
}
-static void cyberjack_disconnect(struct usb_serial *serial)
+static int cyberjack_port_remove(struct usb_serial_port *port)
{
- int i;
+ struct cyberjack_private *priv;
- for (i = 0; i < serial->num_ports; ++i)
- usb_kill_urb(serial->port[i]->interrupt_in_urb);
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
-static void cyberjack_release(struct usb_serial *serial)
+static void cyberjack_disconnect(struct usb_serial *serial)
{
int i;
- for (i = 0; i < serial->num_ports; ++i) {
- /* My special items, the standard routines free my urbs */
- kfree(usb_get_serial_port_data(serial->port[i]));
- }
+ for (i = 0; i < serial->num_ports; ++i)
+ usb_kill_urb(serial->port[i]->interrupt_in_urb);
}
static int cyberjack_open(struct tty_struct *tty,
};
/* function prototypes for the Cypress USB to serial device */
-static int cypress_earthmate_startup(struct usb_serial *serial);
-static int cypress_hidcom_startup(struct usb_serial *serial);
-static int cypress_ca42v2_startup(struct usb_serial *serial);
-static void cypress_release(struct usb_serial *serial);
+static int cypress_earthmate_port_probe(struct usb_serial_port *port);
+static int cypress_hidcom_port_probe(struct usb_serial_port *port);
+static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
+static int cypress_port_remove(struct usb_serial_port *port);
static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
static void cypress_close(struct usb_serial_port *port);
static void cypress_dtr_rts(struct usb_serial_port *port, int on);
.description = "DeLorme Earthmate USB",
.id_table = id_table_earthmate,
.num_ports = 1,
- .attach = cypress_earthmate_startup,
- .release = cypress_release,
+ .port_probe = cypress_earthmate_port_probe,
+ .port_remove = cypress_port_remove,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
.description = "HID->COM RS232 Adapter",
.id_table = id_table_cyphidcomrs232,
.num_ports = 1,
- .attach = cypress_hidcom_startup,
- .release = cypress_release,
+ .port_probe = cypress_hidcom_port_probe,
+ .port_remove = cypress_port_remove,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
.description = "Nokia CA-42 V2 Adapter",
.id_table = id_table_nokiaca42v2,
.num_ports = 1,
- .attach = cypress_ca42v2_startup,
- .release = cypress_release,
+ .port_probe = cypress_ca42v2_port_probe,
+ .port_remove = cypress_port_remove,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
*****************************************************************************/
-static int generic_startup(struct usb_serial *serial)
+static int cypress_generic_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct cypress_private *priv;
- struct usb_serial_port *port = serial->port[0];
priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
if (!priv)
}
-static int cypress_earthmate_startup(struct usb_serial *serial)
+static int cypress_earthmate_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct cypress_private *priv;
- struct usb_serial_port *port = serial->port[0];
+ int ret;
- if (generic_startup(serial)) {
+ ret = cypress_generic_port_probe(port);
+ if (ret) {
dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
- return 1;
+ return ret;
}
priv = usb_get_serial_port_data(port);
}
return 0;
-} /* cypress_earthmate_startup */
-
+}
-static int cypress_hidcom_startup(struct usb_serial *serial)
+static int cypress_hidcom_port_probe(struct usb_serial_port *port)
{
struct cypress_private *priv;
- struct usb_serial_port *port = serial->port[0];
+ int ret;
- if (generic_startup(serial)) {
+ ret = cypress_generic_port_probe(port);
+ if (ret) {
dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
- return 1;
+ return ret;
}
priv = usb_get_serial_port_data(port);
priv->chiptype = CT_CYPHIDCOM;
return 0;
-} /* cypress_hidcom_startup */
-
+}
-static int cypress_ca42v2_startup(struct usb_serial *serial)
+static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
{
struct cypress_private *priv;
- struct usb_serial_port *port = serial->port[0];
+ int ret;
- if (generic_startup(serial)) {
+ ret = cypress_generic_port_probe(port);
+ if (ret) {
dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
- return 1;
+ return ret;
}
priv = usb_get_serial_port_data(port);
priv->chiptype = CT_CA42V2;
return 0;
-} /* cypress_ca42v2_startup */
-
+}
-static void cypress_release(struct usb_serial *serial)
+static int cypress_port_remove(struct usb_serial_port *port)
{
struct cypress_private *priv;
- /* all open ports are closed at this point */
- priv = usb_get_serial_port_data(serial->port[0]);
+ priv = usb_get_serial_port_data(port);
- if (priv) {
- kfifo_free(&priv->write_fifo);
- kfree(priv);
- }
-}
+ kfifo_free(&priv->write_fifo);
+ kfree(priv);
+ return 0;
+}
static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
{
return -ENOIOCTLCMD;
}
-static int f81232_startup(struct usb_serial *serial)
+static int f81232_port_probe(struct usb_serial_port *port)
{
struct f81232_private *priv;
- int i;
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
- if (!priv)
- goto cleanup;
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
- usb_set_serial_port_data(serial->port[i], priv);
- }
- return 0;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
-cleanup:
- for (--i; i >= 0; --i) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->delta_msr_wait);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
}
-static void f81232_release(struct usb_serial *serial)
+static int f81232_port_remove(struct usb_serial_port *port)
{
- int i;
struct f81232_private *priv;
- for (i = 0; i < serial->num_ports; ++i) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- }
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
static struct usb_serial_driver f81232_device = {
.tiocmset = f81232_tiocmset,
.process_read_urb = f81232_process_read_urb,
.read_int_callback = f81232_read_int_callback,
- .attach = f81232_startup,
- .release = f81232_release,
+ .port_probe = f81232_port_probe,
+ .port_remove = f81232_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
-static int garmin_attach(struct usb_serial *serial)
+static int garmin_port_probe(struct usb_serial_port *port)
{
- int status = 0;
- struct usb_serial_port *port = serial->port[0];
- struct garmin_data *garmin_data_p = NULL;
+ int status;
+ struct garmin_data *garmin_data_p;
garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
if (garmin_data_p == NULL) {
}
-static void garmin_disconnect(struct usb_serial *serial)
+static int garmin_port_remove(struct usb_serial_port *port)
{
- struct usb_serial_port *port = serial->port[0];
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
usb_kill_urb(port->interrupt_in_urb);
del_timer_sync(&garmin_data_p->timer);
-}
-
-
-static void garmin_release(struct usb_serial *serial)
-{
- struct usb_serial_port *port = serial->port[0];
- struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-
kfree(garmin_data_p);
+ return 0;
}
.close = garmin_close,
.throttle = garmin_throttle,
.unthrottle = garmin_unthrottle,
- .attach = garmin_attach,
- .disconnect = garmin_disconnect,
- .release = garmin_release,
+ .port_probe = garmin_port_probe,
+ .port_remove = garmin_port_remove,
.write = garmin_write,
.write_room = garmin_write_room,
.write_bulk_callback = garmin_write_bulk_callback,
static int edge_startup(struct usb_serial *serial);
static void edge_disconnect(struct usb_serial *serial);
static void edge_release(struct usb_serial *serial);
+static int edge_port_probe(struct usb_serial_port *port);
+static int edge_port_remove(struct usb_serial_port *port);
#include "io_tables.h" /* all of the devices that this driver supports */
static int edge_startup(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial;
- struct edgeport_port *edge_port;
struct usb_device *dev;
struct device *ddev = &serial->dev->dev;
- int i, j;
+ int i;
int response;
bool interrupt_in_found;
bool bulk_in_found;
/* we set up the pointers to the endpoints in the edge_open function,
* as the structures aren't created yet. */
- /* set up our port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
- if (edge_port == NULL) {
- dev_err(ddev, "%s - Out of memory\n", __func__);
- for (j = 0; j < i; ++j) {
- kfree(usb_get_serial_port_data(serial->port[j]));
- usb_set_serial_port_data(serial->port[j],
- NULL);
- }
- usb_set_serial_data(serial, NULL);
- kfree(edge_serial);
- return -ENOMEM;
- }
- spin_lock_init(&edge_port->ep_lock);
- edge_port->port = serial->port[i];
- usb_set_serial_port_data(serial->port[i], edge_port);
- }
-
response = 0;
if (edge_serial->is_epic) {
static void edge_release(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
- int i;
-
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
kfree(edge_serial);
}
+static int edge_port_probe(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port;
+
+ edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+ if (!edge_port)
+ return -ENOMEM;
+
+ spin_lock_init(&edge_port->ep_lock);
+ edge_port->port = port;
+
+ usb_set_serial_port_data(port, edge_port);
+
+ return 0;
+}
+
+static int edge_port_remove(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port;
+
+ edge_port = usb_get_serial_port_data(port);
+ kfree(edge_port);
+
+ return 0;
+}
+
module_usb_serial_driver(serial_drivers, id_table_combined);
MODULE_AUTHOR(DRIVER_AUTHOR);
.attach = edge_startup,
.disconnect = edge_disconnect,
.release = edge_release,
+ .port_probe = edge_port_probe,
+ .port_remove = edge_port_remove,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.attach = edge_startup,
.disconnect = edge_disconnect,
.release = edge_release,
+ .port_probe = edge_port_probe,
+ .port_remove = edge_port_remove,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.attach = edge_startup,
.disconnect = edge_disconnect,
.release = edge_release,
+ .port_probe = edge_port_probe,
+ .port_remove = edge_port_remove,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.attach = edge_startup,
.disconnect = edge_disconnect,
.release = edge_release,
+ .port_probe = edge_port_probe,
+ .port_remove = edge_port_remove,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
static int edge_startup(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial;
- struct edgeport_port *edge_port;
- struct usb_device *dev;
int status;
- int i;
-
- dev = serial->dev;
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
return status;
}
- /* set up our port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
- if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n",
- __func__);
- goto cleanup;
- }
- spin_lock_init(&edge_port->ep_lock);
- if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
- GFP_KERNEL)) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n",
- __func__);
- kfree(edge_port);
- goto cleanup;
- }
- edge_port->port = serial->port[i];
- edge_port->edge_serial = edge_serial;
- usb_set_serial_port_data(serial->port[i], edge_port);
- edge_port->bUartMode = default_uart_mode;
- }
-
return 0;
-
-cleanup:
- for (--i; i >= 0; --i) {
- edge_port = usb_get_serial_port_data(serial->port[i]);
- kfifo_free(&edge_port->write_fifo);
- kfree(edge_port);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- kfree(edge_serial);
- usb_set_serial_data(serial, NULL);
- return -ENOMEM;
}
static void edge_disconnect(struct usb_serial *serial)
static void edge_release(struct usb_serial *serial)
{
- int i;
+ kfree(usb_get_serial_data(serial));
+}
+
+static int edge_port_probe(struct usb_serial_port *port)
+{
struct edgeport_port *edge_port;
+ int ret;
- for (i = 0; i < serial->num_ports; ++i) {
- edge_port = usb_get_serial_port_data(serial->port[i]);
+ edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+ if (!edge_port)
+ return -ENOMEM;
+
+ ret = kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
+ GFP_KERNEL);
+ if (ret) {
+ kfree(edge_port);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&edge_port->ep_lock);
+ edge_port->port = port;
+ edge_port->edge_serial = usb_get_serial_data(port->serial);
+ edge_port->bUartMode = default_uart_mode;
+
+ usb_set_serial_port_data(port, edge_port);
+
+ ret = edge_create_sysfs_attrs(port);
+ if (ret) {
kfifo_free(&edge_port->write_fifo);
kfree(edge_port);
+ return ret;
}
- kfree(usb_get_serial_data(serial));
+
+ return 0;
}
+static int edge_port_remove(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port;
+
+ edge_port = usb_get_serial_port_data(port);
+
+ edge_remove_sysfs_attrs(port);
+ kfifo_free(&edge_port->write_fifo);
+ kfree(edge_port);
+
+ return 0;
+}
/* Sysfs Attributes */
.attach = edge_startup,
.disconnect = edge_disconnect,
.release = edge_release,
- .port_probe = edge_create_sysfs_attrs,
- .port_remove = edge_remove_sysfs_attrs,
+ .port_probe = edge_port_probe,
+ .port_remove = edge_port_remove,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.attach = edge_startup,
.disconnect = edge_disconnect,
.release = edge_release,
- .port_probe = edge_create_sysfs_attrs,
- .port_remove = edge_remove_sysfs_attrs,
+ .port_probe = edge_port_probe,
+ .port_remove = edge_port_remove,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
static bool xmas;
static int vcc_default = 5;
+static int iuu_create_sysfs_attrs(struct usb_serial_port *port);
+static int iuu_remove_sysfs_attrs(struct usb_serial_port *port);
static void read_rxcmd_callback(struct urb *urb);
struct iuu_private {
u32 clk;
};
-
-static void iuu_free_buf(struct iuu_private *priv)
-{
- kfree(priv->buf);
- kfree(priv->writebuf);
-}
-
-static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv)
-{
- priv->buf = kzalloc(256, GFP_KERNEL);
- priv->writebuf = kzalloc(256, GFP_KERNEL);
- if (!priv->buf || !priv->writebuf) {
- iuu_free_buf(priv);
- dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__);
- return -ENOMEM;
- }
- dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__);
- return 0;
-}
-
-static int iuu_startup(struct usb_serial *serial)
+static int iuu_port_probe(struct usb_serial_port *port)
{
struct iuu_private *priv;
+ int ret;
priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
- dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__);
if (!priv)
return -ENOMEM;
- if (iuu_alloc_buf(serial, priv)) {
+
+ priv->buf = kzalloc(256, GFP_KERNEL);
+ if (!priv->buf) {
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ priv->writebuf = kzalloc(256, GFP_KERNEL);
+ if (!priv->writebuf) {
+ kfree(priv->buf);
kfree(priv);
return -ENOMEM;
}
+
priv->vcc = vcc_default;
spin_lock_init(&priv->lock);
init_waitqueue_head(&priv->delta_msr_wait);
- usb_set_serial_port_data(serial->port[0], priv);
+
+ usb_set_serial_port_data(port, priv);
+
+ ret = iuu_create_sysfs_attrs(port);
+ if (ret) {
+ kfree(priv->writebuf);
+ kfree(priv->buf);
+ kfree(priv);
+ return ret;
+ }
+
return 0;
}
-/* Release function */
-static void iuu_release(struct usb_serial *serial)
+static int iuu_port_remove(struct usb_serial_port *port)
{
- struct usb_serial_port *port = serial->port[0];
struct iuu_private *priv = usb_get_serial_port_data(port);
- if (!port)
- return;
- if (priv) {
- iuu_free_buf(priv);
- dev_dbg(&port->dev, "%s - I will free all\n", __func__);
- usb_set_serial_port_data(port, NULL);
-
- dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__);
- kfree(priv);
+ iuu_remove_sysfs_attrs(port);
+ kfree(priv->writebuf);
+ kfree(priv->buf);
+ kfree(priv);
- dev_dbg(&port->dev, "%s priv is now kfree\n", __func__);
- }
+ return 0;
}
static int iuu_tiocmset(struct tty_struct *tty,
.num_ports = 1,
.bulk_in_size = 512,
.bulk_out_size = 512,
- .port_probe = iuu_create_sysfs_attrs,
- .port_remove = iuu_remove_sysfs_attrs,
.open = iuu_open,
.close = iuu_close,
.write = iuu_uart_write,
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.init_termios = iuu_init_termios,
- .attach = iuu_startup,
- .release = iuu_release,
+ .port_probe = iuu_port_probe,
+ .port_remove = iuu_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
#endif
-static int keyspan_pda_startup(struct usb_serial *serial)
+static int keyspan_pda_port_probe(struct usb_serial_port *port)
{
struct keyspan_pda_private *priv;
- /* allocate the private data structures for all ports. Well, for all
- one ports. */
-
priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
if (!priv)
- return 1; /* error */
- usb_set_serial_port_data(serial->port[0], priv);
- init_waitqueue_head(&serial->port[0]->write_wait);
+ return -ENOMEM;
+
INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
- priv->serial = serial;
- priv->port = serial->port[0];
+ priv->serial = port->serial;
+ priv->port = port;
+
+ usb_set_serial_port_data(port, priv);
+
return 0;
}
-static void keyspan_pda_release(struct usb_serial *serial)
+static int keyspan_pda_port_remove(struct usb_serial_port *port)
{
- kfree(usb_get_serial_port_data(serial->port[0]));
+ struct keyspan_pda_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
#ifdef KEYSPAN
.break_ctl = keyspan_pda_break_ctl,
.tiocmget = keyspan_pda_tiocmget,
.tiocmset = keyspan_pda_tiocmset,
- .attach = keyspan_pda_startup,
- .release = keyspan_pda_release,
+ .port_probe = keyspan_pda_port_probe,
+ .port_remove = keyspan_pda_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
/*
* Function prototypes
*/
-static int klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_release(struct usb_serial *serial);
+static int klsi_105_port_probe(struct usb_serial_port *port);
+static int klsi_105_port_remove(struct usb_serial_port *port);
static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
static void klsi_105_close(struct usb_serial_port *port);
static void klsi_105_set_termios(struct tty_struct *tty,
/*.break_ctl = klsi_105_break_ctl,*/
.tiocmget = klsi_105_tiocmget,
.tiocmset = klsi_105_tiocmset,
- .attach = klsi_105_startup,
- .release = klsi_105_release,
+ .port_probe = klsi_105_port_probe,
+ .port_remove = klsi_105_port_remove,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.process_read_urb = klsi_105_process_read_urb,
* Driver's tty interface functions
*/
-static int klsi_105_startup(struct usb_serial *serial)
+static int klsi_105_port_probe(struct usb_serial_port *port)
{
struct klsi_105_private *priv;
- int i;
- /* check if we support the product id (see keyspan.c)
- * FIXME
- */
+ priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- /* allocate the private data structure */
- for (i = 0; i < serial->num_ports; i++) {
- priv = kmalloc(sizeof(struct klsi_105_private),
- GFP_KERNEL);
- if (!priv) {
- dev_dbg(&serial->interface->dev,
- "%s - kmalloc for klsi_105_private failed.\n",
- __func__);
- i--;
- goto err_cleanup;
- }
- /* set initial values for control structures */
- priv->cfg.pktlen = 5;
- priv->cfg.baudrate = kl5kusb105a_sio_b9600;
- priv->cfg.databits = kl5kusb105a_dtb_8;
- priv->cfg.unknown1 = 0;
- priv->cfg.unknown2 = 1;
+ /* set initial values for control structures */
+ priv->cfg.pktlen = 5;
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ priv->cfg.databits = kl5kusb105a_dtb_8;
+ priv->cfg.unknown1 = 0;
+ priv->cfg.unknown2 = 1;
- priv->line_state = 0;
+ priv->line_state = 0;
- usb_set_serial_port_data(serial->port[i], priv);
+ spin_lock_init(&priv->lock);
- spin_lock_init(&priv->lock);
+ /* priv->termios is left uninitialized until port opening */
- /* priv->termios is left uninitialized until port opening */
- init_waitqueue_head(&serial->port[i]->write_wait);
- }
+ usb_set_serial_port_data(port, priv);
return 0;
-
-err_cleanup:
- for (; i >= 0; i--) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
}
-static void klsi_105_release(struct usb_serial *serial)
+static int klsi_105_port_remove(struct usb_serial_port *port)
{
- int i;
+ struct klsi_105_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ return 0;
}
static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
/* Function prototypes */
-static int kobil_startup(struct usb_serial *serial);
-static void kobil_release(struct usb_serial *serial);
+static int kobil_port_probe(struct usb_serial_port *probe);
+static int kobil_port_remove(struct usb_serial_port *probe);
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
static void kobil_close(struct usb_serial_port *port);
static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
.description = "KOBIL USB smart card terminal",
.id_table = id_table,
.num_ports = 1,
- .attach = kobil_startup,
- .release = kobil_release,
+ .port_probe = kobil_port_probe,
+ .port_remove = kobil_port_remove,
.ioctl = kobil_ioctl,
.set_termios = kobil_set_termios,
.init_termios = kobil_init_termios,
};
-static int kobil_startup(struct usb_serial *serial)
+static int kobil_port_probe(struct usb_serial_port *port)
{
int i;
+ struct usb_serial *serial = port->serial;
struct kobil_private *priv;
struct usb_device *pdev;
struct usb_host_config *actconfig;
dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n");
break;
}
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
/* search for the necessary endpoints */
pdev = serial->dev;
}
-static void kobil_release(struct usb_serial *serial)
+static int kobil_port_remove(struct usb_serial_port *port)
{
- int i;
+ struct kobil_private *priv;
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
static void kobil_init_termios(struct tty_struct *tty)
.reserved = BIT(5),
};
+static const struct option_blacklist_info net_intf6_blacklist = {
+ .reserved = BIT(6),
+};
+
static const struct option_blacklist_info zte_mf626_blacklist = {
.sendsetup = BIT(0) | BIT(1),
.reserved = BIT(4),
};
+static const struct option_blacklist_info zte_1255_blacklist = {
+ .reserved = BIT(3) | BIT(4),
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_1255_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
static int oti6858_tiocmget(struct tty_struct *tty);
static int oti6858_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
-static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_release(struct usb_serial *serial);
+static int oti6858_port_probe(struct usb_serial_port *port);
+static int oti6858_port_remove(struct usb_serial_port *port);
/* device info */
static struct usb_serial_driver oti6858_device = {
.write_bulk_callback = oti6858_write_bulk_callback,
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
- .attach = oti6858_startup,
- .release = oti6858_release,
+ .port_probe = oti6858_port_probe,
+ .port_remove = oti6858_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
usb_serial_port_softint(port);
}
-static int oti6858_startup(struct usb_serial *serial)
+static int oti6858_port_probe(struct usb_serial_port *port)
{
- struct usb_serial_port *port = serial->port[0];
struct oti6858_private *priv;
- int i;
-
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
- if (!priv)
- break;
-
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->intr_wait);
-/* INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
-/* INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
- priv->port = port;
- INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
- INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }
- if (i == serial->num_ports)
- return 0;
- for (--i; i >= 0; --i) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->intr_wait);
+ priv->port = port;
+ INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
+ INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
+
+static int oti6858_port_remove(struct usb_serial_port *port)
+{
+ struct oti6858_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
return -ENOIOCTLCMD;
}
-
-static void oti6858_release(struct usb_serial *serial)
-{
- int i;
-
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
-}
-
static void oti6858_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
HX, /* HX version of the pl2303 chip */
};
+struct pl2303_serial_private {
+ enum pl2303_type type;
+};
+
struct pl2303_private {
spinlock_t lock;
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
- enum pl2303_type type;
};
static int pl2303_vendor_read(__u16 value, __u16 index,
static int pl2303_startup(struct usb_serial *serial)
{
- struct pl2303_private *priv;
+ struct pl2303_serial_private *spriv;
enum pl2303_type type = type_0;
unsigned char *buf;
- int i;
+
+ spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+ if (!spriv)
+ return -ENOMEM;
buf = kmalloc(10, GFP_KERNEL);
- if (buf == NULL)
+ if (!buf) {
+ kfree(spriv);
return -ENOMEM;
+ }
if (serial->dev->descriptor.bDeviceClass == 0x02)
type = type_0;
type = type_1;
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
- if (!priv)
- goto cleanup;
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
- priv->type = type;
- usb_set_serial_port_data(serial->port[i], priv);
- }
+ spriv->type = type;
+ usb_set_serial_data(serial, spriv);
pl2303_vendor_read(0x8484, 0, serial, buf);
pl2303_vendor_write(0x0404, 0, serial);
kfree(buf);
return 0;
+}
-cleanup:
- kfree(buf);
- for (--i; i >= 0; --i) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
+static void pl2303_release(struct usb_serial *serial)
+{
+ struct pl2303_serial_private *spriv;
+
+ spriv = usb_get_serial_data(serial);
+ kfree(spriv);
+}
+
+static int pl2303_port_probe(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->delta_msr_wait);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
+
+static int pl2303_port_remove(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
static int set_control_lines(struct usb_device *dev, u8 value)
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int cflag;
}
if (baud > 1228800) {
/* type_0, type_1 only support up to 1228800 baud */
- if (priv->type != HX)
+ if (spriv->type != HX)
baud = 1228800;
else if (baud > 6000000)
baud = 6000000;
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
if (cflag & CRTSCTS) {
- if (priv->type == HX)
+ if (spriv->type == HX)
pl2303_vendor_write(0x0, 0x61, serial);
else
pl2303_vendor_write(0x0, 0x41, serial);
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
- struct pl2303_private *priv = usb_get_serial_port_data(port);
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
- if (priv->type != HX) {
+ if (spriv->type != HX) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
dev_err(&port->dev, "error sending break = %d\n", result);
}
-static void pl2303_release(struct usb_serial *serial)
-{
- int i;
- struct pl2303_private *priv;
-
- for (i = 0; i < serial->num_ports; ++i) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- }
-}
-
static void pl2303_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
.read_int_callback = pl2303_read_int_callback,
.attach = pl2303_startup,
.release = pl2303_release,
+ .port_probe = pl2303_port_probe,
+ .port_remove = pl2303_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
u8 line_status;
};
-/* desc : when device plug in,this function would be called.
- * thanks to usb_serial subsystem,then do almost every things for us. And what
- * we should do just alloc the buffer */
-static int spcp8x5_startup(struct usb_serial *serial)
+static int spcp8x5_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv;
- int i;
enum spcp8x5_type type = SPCP825_007_TYPE;
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
type = SPCP825_PHILIP_TYPE;
dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
- if (!priv)
- goto cleanup;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
- priv->type = type;
- usb_set_serial_port_data(serial->port[i] , priv);
- }
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->delta_msr_wait);
+ priv->type = type;
+
+ usb_set_serial_port_data(port , priv);
return 0;
-cleanup:
- for (--i; i >= 0; --i) {
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i] , NULL);
- }
- return -ENOMEM;
}
-/* call when the device plug out. free all the memory alloced by probe */
-static void spcp8x5_release(struct usb_serial *serial)
+static int spcp8x5_port_remove(struct usb_serial_port *port)
{
- int i;
+ struct spcp8x5_private *priv;
- for (i = 0; i < serial->num_ports; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
/* set the modem control line of the device.
.ioctl = spcp8x5_ioctl,
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
- .attach = spcp8x5_startup,
- .release = spcp8x5_release,
+ .port_probe = spcp8x5_port_probe,
+ .port_remove = spcp8x5_port_remove,
.process_read_urb = spcp8x5_process_read_urb,
};
struct async_icount icount;
};
-static void ssu100_release(struct usb_serial *serial)
-{
- struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
-
- kfree(priv);
-}
-
static inline int ssu100_control_msg(struct usb_device *dev,
u8 request, u16 data, u16 index)
{
}
static int ssu100_attach(struct usb_serial *serial)
+{
+ return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_port_probe(struct usb_serial_port *port)
{
struct ssu100_port_private *priv;
- struct usb_serial_port *port = *serial->port;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
- sizeof(*priv));
+ if (!priv)
return -ENOMEM;
- }
spin_lock_init(&priv->status_lock);
init_waitqueue_head(&priv->delta_msr_wait);
+
usb_set_serial_port_data(port, priv);
- return ssu100_initdevice(serial->dev);
+ return 0;
+}
+
+static int ssu100_port_remove(struct usb_serial_port *port)
+{
+ struct ssu100_port_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
}
static int ssu100_tiocmget(struct tty_struct *tty)
.open = ssu100_open,
.close = ssu100_close,
.attach = ssu100_attach,
- .release = ssu100_release,
+ .port_probe = ssu100_port_probe,
+ .port_remove = ssu100_port_remove,
.dtr_rts = ssu100_dtr_rts,
.process_read_urb = ssu100_process_read_urb,
.tiocmget = ssu100_tiocmget,
static int ti_startup(struct usb_serial *serial);
static void ti_release(struct usb_serial *serial);
+static int ti_port_probe(struct usb_serial_port *port);
+static int ti_port_remove(struct usb_serial_port *port);
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
static void ti_close(struct usb_serial_port *port);
static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
.num_ports = 1,
.attach = ti_startup,
.release = ti_release,
+ .port_probe = ti_port_probe,
+ .port_remove = ti_port_remove,
.open = ti_open,
.close = ti_close,
.write = ti_write,
.num_ports = 2,
.attach = ti_startup,
.release = ti_release,
+ .port_probe = ti_port_probe,
+ .port_remove = ti_port_remove,
.open = ti_open,
.close = ti_close,
.write = ti_write,
static int ti_startup(struct usb_serial *serial)
{
struct ti_device *tdev;
- struct ti_port *tport;
struct usb_device *dev = serial->dev;
int status;
- int i;
-
dev_dbg(&dev->dev,
"%s - product 0x%4X, num configurations %d, configuration value %d",
goto free_tdev;
}
- /* set up port structures */
- for (i = 0; i < serial->num_ports; ++i) {
- tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
- if (tport == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __func__);
- status = -ENOMEM;
- goto free_tports;
- }
- spin_lock_init(&tport->tp_lock);
- tport->tp_uart_base_addr = (i == 0 ?
- TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
- tport->tp_closing_wait = closing_wait;
- init_waitqueue_head(&tport->tp_msr_wait);
- init_waitqueue_head(&tport->tp_write_wait);
- if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE,
- GFP_KERNEL)) {
- dev_err(&dev->dev, "%s - out of memory\n", __func__);
- kfree(tport);
- status = -ENOMEM;
- goto free_tports;
- }
- tport->tp_port = serial->port[i];
- tport->tp_tdev = tdev;
- usb_set_serial_port_data(serial->port[i], tport);
- tport->tp_uart_mode = 0; /* default is RS232 */
- }
-
return 0;
-free_tports:
- for (--i; i >= 0; --i) {
- tport = usb_get_serial_port_data(serial->port[i]);
- kfifo_free(&tport->write_fifo);
- kfree(tport);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
free_tdev:
kfree(tdev);
usb_set_serial_data(serial, NULL);
static void ti_release(struct usb_serial *serial)
{
- int i;
struct ti_device *tdev = usb_get_serial_data(serial);
+
+ kfree(tdev);
+}
+
+static int ti_port_probe(struct usb_serial_port *port)
+{
struct ti_port *tport;
- for (i = 0; i < serial->num_ports; ++i) {
- tport = usb_get_serial_port_data(serial->port[i]);
- if (tport) {
- kfifo_free(&tport->write_fifo);
- kfree(tport);
- }
+ tport = kzalloc(sizeof(*tport), GFP_KERNEL);
+ if (!tport)
+ return -ENOMEM;
+
+ spin_lock_init(&tport->tp_lock);
+ if (port == port->serial->port[0])
+ tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
+ else
+ tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
+ tport->tp_closing_wait = closing_wait;
+ init_waitqueue_head(&tport->tp_msr_wait);
+ init_waitqueue_head(&tport->tp_write_wait);
+ if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
+ kfree(tport);
+ return -ENOMEM;
}
+ tport->tp_port = port;
+ tport->tp_tdev = usb_get_serial_data(port->serial);
+ tport->tp_uart_mode = 0; /* default is RS232 */
- kfree(tdev);
+ usb_set_serial_port_data(port, tport);
+
+ return 0;
}
+static int ti_port_remove(struct usb_serial_port *port)
+{
+ struct ti_port *tport;
+
+ tport = usb_get_serial_port_data(port);
+ kfifo_free(&tport->write_fifo);
+ kfree(tport);
+
+ return 0;
+}
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
{
out:
dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__);
- return size;
+ return ret;
out_input:
dev_err(pchip->dev, "%s:input conversion fail\n", __func__);
- return size;
+ return ret;
}
* so if we are running on anything older than 4 do not attempt to read
* control/platform-feature-xs_reset_watches.
*/
-static bool xen_strict_xenbus_quirk()
+static bool xen_strict_xenbus_quirk(void)
{
uint32_t eax, ebx, ecx, edx, base;
{
__be32 *p;
- BUG_ON(be32_to_cpu(stat) > NLM_LCK_DENIED_GRACE_PERIOD);
+ WARN_ON_ONCE(be32_to_cpu(stat) > NLM_LCK_DENIED_GRACE_PERIOD);
p = xdr_reserve_space(xdr, 4);
*p = stat;
}
/* Obtain file pointer. Not used by FREE_ALL call. */
if (filp != NULL) {
- if ((error = nlm_lookup_file(rqstp, &file, &lock->fh)) != 0)
+ error = cast_status(nlm_lookup_file(rqstp, &file, &lock->fh));
+ if (error != 0)
goto no_locks;
*filp = file;
#include <linux/sched.h>
#include <linux/proc_fs.h>
struct ctl_table_header;
+struct mempolicy;
extern struct proc_dir_entry proc_root;
#ifdef CONFIG_PROC_SYSCTL
#ifdef CONFIG_MMU
struct vm_area_struct *tail_vma;
#endif
+#ifdef CONFIG_NUMA
+ struct mempolicy *task_mempolicy;
+#endif
};
void proc_init_inodecache(void);
seq_printf(m, "%*c", len, ' ');
}
+#ifdef CONFIG_NUMA
+/*
+ * These functions are for numa_maps but called in generic **maps seq_file
+ * ->start(), ->stop() ops.
+ *
+ * numa_maps scans all vmas under mmap_sem and checks their mempolicy.
+ * Each mempolicy object is controlled by reference counting. The problem here
+ * is how to avoid accessing dead mempolicy object.
+ *
+ * Because we're holding mmap_sem while reading seq_file, it's safe to access
+ * each vma's mempolicy, no vma objects will never drop refs to mempolicy.
+ *
+ * A task's mempolicy (task->mempolicy) has different behavior. task->mempolicy
+ * is set and replaced under mmap_sem but unrefed and cleared under task_lock().
+ * So, without task_lock(), we cannot trust get_vma_policy() because we cannot
+ * gurantee the task never exits under us. But taking task_lock() around
+ * get_vma_plicy() causes lock order problem.
+ *
+ * To access task->mempolicy without lock, we hold a reference count of an
+ * object pointed by task->mempolicy and remember it. This will guarantee
+ * that task->mempolicy points to an alive object or NULL in numa_maps accesses.
+ */
+static void hold_task_mempolicy(struct proc_maps_private *priv)
+{
+ struct task_struct *task = priv->task;
+
+ task_lock(task);
+ priv->task_mempolicy = task->mempolicy;
+ mpol_get(priv->task_mempolicy);
+ task_unlock(task);
+}
+static void release_task_mempolicy(struct proc_maps_private *priv)
+{
+ mpol_put(priv->task_mempolicy);
+}
+#else
+static void hold_task_mempolicy(struct proc_maps_private *priv)
+{
+}
+static void release_task_mempolicy(struct proc_maps_private *priv)
+{
+}
+#endif
+
static void vma_stop(struct proc_maps_private *priv, struct vm_area_struct *vma)
{
if (vma && vma != priv->tail_vma) {
struct mm_struct *mm = vma->vm_mm;
+ release_task_mempolicy(priv);
up_read(&mm->mmap_sem);
mmput(mm);
}
tail_vma = get_gate_vma(priv->task->mm);
priv->tail_vma = tail_vma;
-
+ hold_task_mempolicy(priv);
/* Start with last addr hint */
vma = find_vma(mm, last_addr);
if (last_addr && vma) {
if (vma)
return vma;
+ release_task_mempolicy(priv);
/* End of vmas has been reached */
m->version = (tail_vma != NULL)? 0: -1UL;
up_read(&mm->mmap_sem);
walk.private = md;
walk.mm = mm;
- task_lock(task);
pol = get_vma_policy(task, vma, vma->vm_start);
mpol_to_str(buffer, sizeof(buffer), pol, 0);
mpol_cond_put(pol);
- task_unlock(task);
seq_printf(m, "%08lx %s", vma->vm_start, buffer);
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/fs.h>
+#include <asm/siginfo.h>
/*
* These are the only things you should do on a core-file: use only these
+++ /dev/null
-/*
- * Part of the HSI character device driver.
- *
- * Copyright (C) 2010 Nokia Corporation. All rights reserved.
- *
- * Contact: Andras Domokos <andras.domokos at nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-
-#ifndef __HSI_CHAR_H
-#define __HSI_CHAR_H
-
-#define HSI_CHAR_MAGIC 'k'
-#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype)
-#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype)
-#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype)
-#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num)
-
-#define HSC_RESET HSC_IO(16)
-#define HSC_SET_PM HSC_IO(17)
-#define HSC_SEND_BREAK HSC_IO(18)
-#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config)
-#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config)
-#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config)
-#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config)
-
-#define HSC_PM_DISABLE 0
-#define HSC_PM_ENABLE 1
-
-#define HSC_MODE_STREAM 1
-#define HSC_MODE_FRAME 2
-#define HSC_FLOW_SYNC 0
-#define HSC_ARB_RR 0
-#define HSC_ARB_PRIO 1
-
-struct hsc_rx_config {
- uint32_t mode;
- uint32_t flow;
- uint32_t channels;
-};
-
-struct hsc_tx_config {
- uint32_t mode;
- uint32_t channels;
- uint32_t speed;
- uint32_t arb_mode;
-};
-
-#endif /* __HSI_CHAR_H */
}
extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns);
-extern void free_pid_ns(struct kref *kref);
extern void zap_pid_ns_processes(struct pid_namespace *pid_ns);
extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd);
-
-static inline void put_pid_ns(struct pid_namespace *ns)
-{
- if (ns != &init_pid_ns)
- kref_put(&ns->kref, free_pid_ns);
-}
+extern void put_pid_ns(struct pid_namespace *ns);
#else /* !CONFIG_PID_NS */
#include <linux/err.h>
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON((condition) && __ratelimit(state))
-#define __WARN_RATELIMIT(condition, state, format...) \
-({ \
- int rtn = 0; \
- if (unlikely(__ratelimit(state))) \
- rtn = WARN(condition, format); \
- rtn; \
-})
-
-#define WARN_RATELIMIT(condition, format...) \
+#define WARN_RATELIMIT(condition, format, ...) \
({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
- __WARN_RATELIMIT(condition, &_rs, format); \
+ int rtn = !!(condition); \
+ \
+ if (unlikely(rtn && __ratelimit(&_rs))) \
+ WARN(rtn, format, ##__VA_ARGS__); \
+ \
+ rtn; \
})
#else
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON(condition)
-#define __WARN_RATELIMIT(condition, state, format...) \
-({ \
- int rtn = WARN(condition, format); \
- rtn; \
-})
-
-#define WARN_RATELIMIT(condition, format...) \
+#define WARN_RATELIMIT(condition, format, ...) \
({ \
- int rtn = WARN(condition, format); \
+ int rtn = WARN(condition, format, ##__VA_ARGS__); \
rtn; \
})
extern void usb_register_notify(struct notifier_block *nb);
extern void usb_unregister_notify(struct notifier_block *nb);
-#ifdef DEBUG
-#define dbg(format, arg...) \
- printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg)
-#else
-#define dbg(format, arg...) \
-do { \
- if (0) \
- printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
-} while (0)
-#endif
-
/* debugfs stuff */
extern struct dentry *usb_debug_root;
-header-y += audio.h
-header-y += cdc.h
-header-y += ch9.h
-header-y += ch11.h
-header-y += functionfs.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += g_printer.h
-header-y += tmc.h
-header-y += video.h
* Types and defines in this file are either specific to version 1.0 of
* this standard or common for newer versions.
*/
-
#ifndef __LINUX_USB_AUDIO_H
#define __LINUX_USB_AUDIO_H
-#include <linux/types.h>
-
-/* bInterfaceProtocol values to denote the version of the standard used */
-#define UAC_VERSION_1 0x00
-#define UAC_VERSION_2 0x20
-
-/* A.2 Audio Interface Subclass Codes */
-#define USB_SUBCLASS_AUDIOCONTROL 0x01
-#define USB_SUBCLASS_AUDIOSTREAMING 0x02
-#define USB_SUBCLASS_MIDISTREAMING 0x03
-
-/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
-#define UAC_HEADER 0x01
-#define UAC_INPUT_TERMINAL 0x02
-#define UAC_OUTPUT_TERMINAL 0x03
-#define UAC_MIXER_UNIT 0x04
-#define UAC_SELECTOR_UNIT 0x05
-#define UAC_FEATURE_UNIT 0x06
-#define UAC1_PROCESSING_UNIT 0x07
-#define UAC1_EXTENSION_UNIT 0x08
-
-/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
-#define UAC_AS_GENERAL 0x01
-#define UAC_FORMAT_TYPE 0x02
-#define UAC_FORMAT_SPECIFIC 0x03
-
-/* A.7 Processing Unit Process Types */
-#define UAC_PROCESS_UNDEFINED 0x00
-#define UAC_PROCESS_UP_DOWNMIX 0x01
-#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
-#define UAC_PROCESS_STEREO_EXTENDER 0x03
-#define UAC_PROCESS_REVERB 0x04
-#define UAC_PROCESS_CHORUS 0x05
-#define UAC_PROCESS_DYN_RANGE_COMP 0x06
-
-/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
-#define UAC_EP_GENERAL 0x01
-
-/* A.9 Audio Class-Specific Request Codes */
-#define UAC_SET_ 0x00
-#define UAC_GET_ 0x80
-
-#define UAC__CUR 0x1
-#define UAC__MIN 0x2
-#define UAC__MAX 0x3
-#define UAC__RES 0x4
-#define UAC__MEM 0x5
-
-#define UAC_SET_CUR (UAC_SET_ | UAC__CUR)
-#define UAC_GET_CUR (UAC_GET_ | UAC__CUR)
-#define UAC_SET_MIN (UAC_SET_ | UAC__MIN)
-#define UAC_GET_MIN (UAC_GET_ | UAC__MIN)
-#define UAC_SET_MAX (UAC_SET_ | UAC__MAX)
-#define UAC_GET_MAX (UAC_GET_ | UAC__MAX)
-#define UAC_SET_RES (UAC_SET_ | UAC__RES)
-#define UAC_GET_RES (UAC_GET_ | UAC__RES)
-#define UAC_SET_MEM (UAC_SET_ | UAC__MEM)
-#define UAC_GET_MEM (UAC_GET_ | UAC__MEM)
-
-#define UAC_GET_STAT 0xff
-
-/* A.10 Control Selector Codes */
-
-/* A.10.1 Terminal Control Selectors */
-#define UAC_TERM_COPY_PROTECT 0x01
-
-/* A.10.2 Feature Unit Control Selectors */
-#define UAC_FU_MUTE 0x01
-#define UAC_FU_VOLUME 0x02
-#define UAC_FU_BASS 0x03
-#define UAC_FU_MID 0x04
-#define UAC_FU_TREBLE 0x05
-#define UAC_FU_GRAPHIC_EQUALIZER 0x06
-#define UAC_FU_AUTOMATIC_GAIN 0x07
-#define UAC_FU_DELAY 0x08
-#define UAC_FU_BASS_BOOST 0x09
-#define UAC_FU_LOUDNESS 0x0a
-
-#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
-
-/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
-#define UAC_UD_ENABLE 0x01
-#define UAC_UD_MODE_SELECT 0x02
-
-/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
-#define UAC_DP_ENABLE 0x01
-#define UAC_DP_MODE_SELECT 0x02
-
-/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
-#define UAC_3D_ENABLE 0x01
-#define UAC_3D_SPACE 0x02
-
-/* A.10.3.4 Reverberation Processing Unit Control Selectors */
-#define UAC_REVERB_ENABLE 0x01
-#define UAC_REVERB_LEVEL 0x02
-#define UAC_REVERB_TIME 0x03
-#define UAC_REVERB_FEEDBACK 0x04
-
-/* A.10.3.5 Chorus Processing Unit Control Selectors */
-#define UAC_CHORUS_ENABLE 0x01
-#define UAC_CHORUS_LEVEL 0x02
-#define UAC_CHORUS_RATE 0x03
-#define UAC_CHORUS_DEPTH 0x04
-
-/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
-#define UAC_DCR_ENABLE 0x01
-#define UAC_DCR_RATE 0x02
-#define UAC_DCR_MAXAMPL 0x03
-#define UAC_DCR_THRESHOLD 0x04
-#define UAC_DCR_ATTACK_TIME 0x05
-#define UAC_DCR_RELEASE_TIME 0x06
-
-/* A.10.4 Extension Unit Control Selectors */
-#define UAC_XU_ENABLE 0x01
-
-/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
-#define UAC_MS_HEADER 0x01
-#define UAC_MIDI_IN_JACK 0x02
-#define UAC_MIDI_OUT_JACK 0x03
-
-/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
-#define UAC_MS_GENERAL 0x01
-
-/* Terminals - 2.1 USB Terminal Types */
-#define UAC_TERMINAL_UNDEFINED 0x100
-#define UAC_TERMINAL_STREAMING 0x101
-#define UAC_TERMINAL_VENDOR_SPEC 0x1FF
-
-/* Terminal Control Selectors */
-/* 4.3.2 Class-Specific AC Interface Descriptor */
-struct uac1_ac_header_descriptor {
- __u8 bLength; /* 8 + n */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
- __le16 bcdADC; /* 0x0100 */
- __le16 wTotalLength; /* includes Unit and Terminal desc. */
- __u8 bInCollection; /* n */
- __u8 baInterfaceNr[]; /* [n] */
-} __attribute__ ((packed));
-
-#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
-struct uac1_ac_header_descriptor_##n { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __le16 bcdADC; \
- __le16 wTotalLength; \
- __u8 bInCollection; \
- __u8 baInterfaceNr[n]; \
-} __attribute__ ((packed))
-
-/* 4.3.2.1 Input Terminal Descriptor */
-struct uac_input_terminal_descriptor {
- __u8 bLength; /* in bytes: 12 */
- __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
- __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
- __u8 bTerminalID; /* Constant uniquely terminal ID */
- __le16 wTerminalType; /* USB Audio Terminal Types */
- __u8 bAssocTerminal; /* ID of the Output Terminal associated */
- __u8 bNrChannels; /* Number of logical output channels */
- __le16 wChannelConfig;
- __u8 iChannelNames;
- __u8 iTerminal;
-} __attribute__ ((packed));
-
-#define UAC_DT_INPUT_TERMINAL_SIZE 12
-
-/* Terminals - 2.2 Input Terminal Types */
-#define UAC_INPUT_TERMINAL_UNDEFINED 0x200
-#define UAC_INPUT_TERMINAL_MICROPHONE 0x201
-#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
-#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
-#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
-#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
-#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
-
-/* Terminals - control selectors */
-
-#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01
-
-/* 4.3.2.2 Output Terminal Descriptor */
-struct uac1_output_terminal_descriptor {
- __u8 bLength; /* in bytes: 9 */
- __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
- __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
- __u8 bTerminalID; /* Constant uniquely terminal ID */
- __le16 wTerminalType; /* USB Audio Terminal Types */
- __u8 bAssocTerminal; /* ID of the Input Terminal associated */
- __u8 bSourceID; /* ID of the connected Unit or Terminal*/
- __u8 iTerminal;
-} __attribute__ ((packed));
-
-#define UAC_DT_OUTPUT_TERMINAL_SIZE 9
-
-/* Terminals - 2.3 Output Terminal Types */
-#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300
-#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301
-#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302
-#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
-#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
-#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
-#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
-#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
-
-/* Set bControlSize = 2 as default setting */
-#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \
-struct uac_feature_unit_descriptor_##ch { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __u8 bUnitID; \
- __u8 bSourceID; \
- __u8 bControlSize; \
- __le16 bmaControls[ch + 1]; \
- __u8 iFeature; \
-} __attribute__ ((packed))
-
-/* 4.3.2.3 Mixer Unit Descriptor */
-struct uac_mixer_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUnitID;
- __u8 bNrInPins;
- __u8 baSourceID[];
-} __attribute__ ((packed));
+#include <uapi/linux/usb/audio.h>
-static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
-{
- return desc->baSourceID[desc->bNrInPins];
-}
-
-static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
- int protocol)
-{
- if (protocol == UAC_VERSION_1)
- return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- desc->baSourceID[desc->bNrInPins + 1];
- else
- return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
- (desc->baSourceID[desc->bNrInPins + 3] << 16) |
- (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- (desc->baSourceID[desc->bNrInPins + 1]);
-}
-
-static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- desc->baSourceID[desc->bNrInPins + 3] :
- desc->baSourceID[desc->bNrInPins + 5];
-}
-
-static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- &desc->baSourceID[desc->bNrInPins + 4] :
- &desc->baSourceID[desc->bNrInPins + 6];
-}
-
-static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
-{
- __u8 *raw = (__u8 *) desc;
- return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.4 Selector Unit Descriptor */
-struct uac_selector_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUintID;
- __u8 bNrInPins;
- __u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
-{
- __u8 *raw = (__u8 *) desc;
- return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.5 Feature Unit Descriptor */
-struct uac_feature_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUnitID;
- __u8 bSourceID;
- __u8 bControlSize;
- __u8 bmaControls[0]; /* variable length */
-} __attribute__((packed));
-
-static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
-{
- __u8 *raw = (__u8 *) desc;
- return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.6 Processing Unit Descriptors */
-struct uac_processing_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUnitID;
- __u16 wProcessType;
- __u8 bNrInPins;
- __u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
-{
- return desc->baSourceID[desc->bNrInPins];
-}
-
-static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- if (protocol == UAC_VERSION_1)
- return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- desc->baSourceID[desc->bNrInPins + 1];
- else
- return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
- (desc->baSourceID[desc->bNrInPins + 3] << 16) |
- (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- (desc->baSourceID[desc->bNrInPins + 1]);
-}
-
-static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- desc->baSourceID[desc->bNrInPins + 3] :
- desc->baSourceID[desc->bNrInPins + 5];
-}
-
-static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- desc->baSourceID[desc->bNrInPins + 4] :
- desc->baSourceID[desc->bNrInPins + 6];
-}
-
-static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- &desc->baSourceID[desc->bNrInPins + 5] :
- &desc->baSourceID[desc->bNrInPins + 7];
-}
-
-static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return desc->baSourceID[desc->bNrInPins + control_size];
-}
-
-static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return &desc->baSourceID[desc->bNrInPins + control_size + 1];
-}
-
-/* 4.5.2 Class-Specific AS Interface Descriptor */
-struct uac1_as_header_descriptor {
- __u8 bLength; /* in bytes: 7 */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* AS_GENERAL */
- __u8 bTerminalLink; /* Terminal ID of connected Terminal */
- __u8 bDelay; /* Delay introduced by the data path */
- __le16 wFormatTag; /* The Audio Data Format */
-} __attribute__ ((packed));
-
-#define UAC_DT_AS_HEADER_SIZE 7
-
-/* Formats - A.1.1 Audio Data Format Type I Codes */
-#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0
-#define UAC_FORMAT_TYPE_I_PCM 0x1
-#define UAC_FORMAT_TYPE_I_PCM8 0x2
-#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3
-#define UAC_FORMAT_TYPE_I_ALAW 0x4
-#define UAC_FORMAT_TYPE_I_MULAW 0x5
-
-struct uac_format_type_i_continuous_descriptor {
- __u8 bLength; /* in bytes: 8 + (ns * 3) */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* FORMAT_TYPE */
- __u8 bFormatType; /* FORMAT_TYPE_1 */
- __u8 bNrChannels; /* physical channels in the stream */
- __u8 bSubframeSize; /* */
- __u8 bBitResolution;
- __u8 bSamFreqType;
- __u8 tLowerSamFreq[3];
- __u8 tUpperSamFreq[3];
-} __attribute__ ((packed));
-
-#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
-
-struct uac_format_type_i_discrete_descriptor {
- __u8 bLength; /* in bytes: 8 + (ns * 3) */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* FORMAT_TYPE */
- __u8 bFormatType; /* FORMAT_TYPE_1 */
- __u8 bNrChannels; /* physical channels in the stream */
- __u8 bSubframeSize; /* */
- __u8 bBitResolution;
- __u8 bSamFreqType;
- __u8 tSamFreq[][3];
-} __attribute__ ((packed));
-
-#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \
-struct uac_format_type_i_discrete_descriptor_##n { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __u8 bFormatType; \
- __u8 bNrChannels; \
- __u8 bSubframeSize; \
- __u8 bBitResolution; \
- __u8 bSamFreqType; \
- __u8 tSamFreq[n][3]; \
-} __attribute__ ((packed))
-
-#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
-
-struct uac_format_type_i_ext_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bFormatType;
- __u8 bSubslotSize;
- __u8 bBitResolution;
- __u8 bHeaderLength;
- __u8 bControlSize;
- __u8 bSideBandProtocol;
-} __attribute__((packed));
-
-/* Formats - Audio Data Format Type I Codes */
-
-#define UAC_FORMAT_TYPE_II_MPEG 0x1001
-#define UAC_FORMAT_TYPE_II_AC3 0x1002
-
-struct uac_format_type_ii_discrete_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bFormatType;
- __le16 wMaxBitRate;
- __le16 wSamplesPerFrame;
- __u8 bSamFreqType;
- __u8 tSamFreq[][3];
-} __attribute__((packed));
-
-struct uac_format_type_ii_ext_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bFormatType;
- __u16 wMaxBitRate;
- __u16 wSamplesPerFrame;
- __u8 bHeaderLength;
- __u8 bSideBandProtocol;
-} __attribute__((packed));
-
-/* type III */
-#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006
-
-/* Formats - A.2 Format Type Codes */
-#define UAC_FORMAT_TYPE_UNDEFINED 0x0
-#define UAC_FORMAT_TYPE_I 0x1
-#define UAC_FORMAT_TYPE_II 0x2
-#define UAC_FORMAT_TYPE_III 0x3
-#define UAC_EXT_FORMAT_TYPE_I 0x81
-#define UAC_EXT_FORMAT_TYPE_II 0x82
-#define UAC_EXT_FORMAT_TYPE_III 0x83
-
-struct uac_iso_endpoint_descriptor {
- __u8 bLength; /* in bytes: 7 */
- __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
- __u8 bDescriptorSubtype; /* EP_GENERAL */
- __u8 bmAttributes;
- __u8 bLockDelayUnits;
- __le16 wLockDelay;
-} __attribute__((packed));
-#define UAC_ISO_ENDPOINT_DESC_SIZE 7
-
-#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01
-#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
-#define UAC_EP_CS_ATTR_FILL_MAX 0x80
-
-/* status word format (3.7.1.1) */
-
-#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2
-
-#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7)
-#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6)
-
-struct uac1_status_word {
- __u8 bStatusType;
- __u8 bOriginator;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
struct usb_audio_control {
struct list_head list;
struct usb_descriptor_header *desc;
};
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_USB_AUDIO_H */
+++ /dev/null
-/*
- * USB Communications Device Class (CDC) definitions
- *
- * CDC says how to talk to lots of different types of network adapters,
- * notably ethernet adapters and various modems. It's used mostly with
- * firmware based USB peripherals.
- */
-
-#ifndef __LINUX_USB_CDC_H
-#define __LINUX_USB_CDC_H
-
-#include <linux/types.h>
-
-#define USB_CDC_SUBCLASS_ACM 0x02
-#define USB_CDC_SUBCLASS_ETHERNET 0x06
-#define USB_CDC_SUBCLASS_WHCM 0x08
-#define USB_CDC_SUBCLASS_DMM 0x09
-#define USB_CDC_SUBCLASS_MDLM 0x0a
-#define USB_CDC_SUBCLASS_OBEX 0x0b
-#define USB_CDC_SUBCLASS_EEM 0x0c
-#define USB_CDC_SUBCLASS_NCM 0x0d
-
-#define USB_CDC_PROTO_NONE 0
-
-#define USB_CDC_ACM_PROTO_AT_V25TER 1
-#define USB_CDC_ACM_PROTO_AT_PCCA101 2
-#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3
-#define USB_CDC_ACM_PROTO_AT_GSM 4
-#define USB_CDC_ACM_PROTO_AT_3G 5
-#define USB_CDC_ACM_PROTO_AT_CDMA 6
-#define USB_CDC_ACM_PROTO_VENDOR 0xff
-
-#define USB_CDC_PROTO_EEM 7
-
-#define USB_CDC_NCM_PROTO_NTB 1
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class-Specific descriptors ... there are a couple dozen of them
- */
-
-#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */
-#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */
-#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */
-#define USB_CDC_UNION_TYPE 0x06 /* union_desc */
-#define USB_CDC_COUNTRY_TYPE 0x07
-#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */
-#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */
-#define USB_CDC_WHCM_TYPE 0x11
-#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */
-#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */
-#define USB_CDC_DMM_TYPE 0x14
-#define USB_CDC_OBEX_TYPE 0x15
-#define USB_CDC_NCM_TYPE 0x1a
-
-/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */
-struct usb_cdc_header_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __le16 bcdCDC;
-} __attribute__ ((packed));
-
-/* "Call Management Descriptor" from CDC spec 5.2.3.2 */
-struct usb_cdc_call_mgmt_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __u8 bmCapabilities;
-#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01
-#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02
-
- __u8 bDataInterface;
-} __attribute__ ((packed));
-
-/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */
-struct usb_cdc_acm_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __u8 bmCapabilities;
-} __attribute__ ((packed));
-
-/* capabilities from 5.2.3.3 */
-
-#define USB_CDC_COMM_FEATURE 0x01
-#define USB_CDC_CAP_LINE 0x02
-#define USB_CDC_CAP_BRK 0x04
-#define USB_CDC_CAP_NOTIFY 0x08
-
-/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
-struct usb_cdc_union_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __u8 bMasterInterface0;
- __u8 bSlaveInterface0;
- /* ... and there could be other slave interfaces */
-} __attribute__ ((packed));
-
-/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */
-struct usb_cdc_country_functional_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __u8 iCountryCodeRelDate;
- __le16 wCountyCode0;
- /* ... and there can be a lot of country codes */
-} __attribute__ ((packed));
-
-/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */
-struct usb_cdc_network_terminal_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __u8 bEntityId;
- __u8 iName;
- __u8 bChannelIndex;
- __u8 bPhysicalInterface;
-} __attribute__ ((packed));
-
-/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
-struct usb_cdc_ether_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __u8 iMACAddress;
- __le32 bmEthernetStatistics;
- __le16 wMaxSegmentSize;
- __le16 wNumberMCFilters;
- __u8 bNumberPowerFilters;
-} __attribute__ ((packed));
-
-/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
-struct usb_cdc_dmm_desc {
- __u8 bFunctionLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u16 bcdVersion;
- __le16 wMaxCommand;
-} __attribute__ ((packed));
-
-/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
-struct usb_cdc_mdlm_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __le16 bcdVersion;
- __u8 bGUID[16];
-} __attribute__ ((packed));
-
-/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */
-struct usb_cdc_mdlm_detail_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- /* type is associated with mdlm_desc.bGUID */
- __u8 bGuidDescriptorType;
- __u8 bDetailData[0];
-} __attribute__ ((packed));
-
-/* "OBEX Control Model Functional Descriptor" */
-struct usb_cdc_obex_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __le16 bcdVersion;
-} __attribute__ ((packed));
-
-/* "NCM Control Model Functional Descriptor" */
-struct usb_cdc_ncm_desc {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-
- __le16 bcdNcmVersion;
- __u8 bmNetworkCapabilities;
-} __attribute__ ((packed));
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class-Specific Control Requests (6.2)
- *
- * section 3.6.2.1 table 4 has the ACM profile, for modems.
- * section 3.8.2 table 10 has the ethernet profile.
- *
- * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant,
- * heavily dependent on the encapsulated (proprietary) command mechanism.
- */
-
-#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00
-#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01
-#define USB_CDC_REQ_SET_LINE_CODING 0x20
-#define USB_CDC_REQ_GET_LINE_CODING 0x21
-#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22
-#define USB_CDC_REQ_SEND_BREAK 0x23
-#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40
-#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41
-#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42
-#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43
-#define USB_CDC_GET_ETHERNET_STATISTIC 0x44
-#define USB_CDC_GET_NTB_PARAMETERS 0x80
-#define USB_CDC_GET_NET_ADDRESS 0x81
-#define USB_CDC_SET_NET_ADDRESS 0x82
-#define USB_CDC_GET_NTB_FORMAT 0x83
-#define USB_CDC_SET_NTB_FORMAT 0x84
-#define USB_CDC_GET_NTB_INPUT_SIZE 0x85
-#define USB_CDC_SET_NTB_INPUT_SIZE 0x86
-#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87
-#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88
-#define USB_CDC_GET_CRC_MODE 0x89
-#define USB_CDC_SET_CRC_MODE 0x8a
-
-/* Line Coding Structure from CDC spec 6.2.13 */
-struct usb_cdc_line_coding {
- __le32 dwDTERate;
- __u8 bCharFormat;
-#define USB_CDC_1_STOP_BITS 0
-#define USB_CDC_1_5_STOP_BITS 1
-#define USB_CDC_2_STOP_BITS 2
-
- __u8 bParityType;
-#define USB_CDC_NO_PARITY 0
-#define USB_CDC_ODD_PARITY 1
-#define USB_CDC_EVEN_PARITY 2
-#define USB_CDC_MARK_PARITY 3
-#define USB_CDC_SPACE_PARITY 4
-
- __u8 bDataBits;
-} __attribute__ ((packed));
-
-/* table 62; bits in multicast filter */
-#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0)
-#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */
-#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2)
-#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3)
-#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class-Specific Notifications (6.3) sent by interrupt transfers
- *
- * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
- * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
- * RNDIS also defines its own bit-incompatible notifications
- */
-
-#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00
-#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01
-#define USB_CDC_NOTIFY_SERIAL_STATE 0x20
-#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a
-
-struct usb_cdc_notification {
- __u8 bmRequestType;
- __u8 bNotificationType;
- __le16 wValue;
- __le16 wIndex;
- __le16 wLength;
-} __attribute__ ((packed));
-
-struct usb_cdc_speed_change {
- __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */
- __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class Specific structures and constants
- *
- * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1
- *
- */
-
-struct usb_cdc_ncm_ntb_parameters {
- __le16 wLength;
- __le16 bmNtbFormatsSupported;
- __le32 dwNtbInMaxSize;
- __le16 wNdpInDivisor;
- __le16 wNdpInPayloadRemainder;
- __le16 wNdpInAlignment;
- __le16 wPadding1;
- __le32 dwNtbOutMaxSize;
- __le16 wNdpOutDivisor;
- __le16 wNdpOutPayloadRemainder;
- __le16 wNdpOutAlignment;
- __le16 wNtbOutMaxDatagrams;
-} __attribute__ ((packed));
-
-/*
- * CDC NCM transfer headers, CDC NCM subclass 3.2
- */
-
-#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */
-#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */
-
-struct usb_cdc_ncm_nth16 {
- __le32 dwSignature;
- __le16 wHeaderLength;
- __le16 wSequence;
- __le16 wBlockLength;
- __le16 wNdpIndex;
-} __attribute__ ((packed));
-
-struct usb_cdc_ncm_nth32 {
- __le32 dwSignature;
- __le16 wHeaderLength;
- __le16 wSequence;
- __le32 dwBlockLength;
- __le32 dwNdpIndex;
-} __attribute__ ((packed));
-
-/*
- * CDC NCM datagram pointers, CDC NCM subclass 3.3
- */
-
-#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */
-#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */
-#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */
-#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */
-
-/* 16-bit NCM Datagram Pointer Entry */
-struct usb_cdc_ncm_dpe16 {
- __le16 wDatagramIndex;
- __le16 wDatagramLength;
-} __attribute__((__packed__));
-
-/* 16-bit NCM Datagram Pointer Table */
-struct usb_cdc_ncm_ndp16 {
- __le32 dwSignature;
- __le16 wLength;
- __le16 wNextNdpIndex;
- struct usb_cdc_ncm_dpe16 dpe16[0];
-} __attribute__ ((packed));
-
-/* 32-bit NCM Datagram Pointer Entry */
-struct usb_cdc_ncm_dpe32 {
- __le32 dwDatagramIndex;
- __le32 dwDatagramLength;
-} __attribute__((__packed__));
-
-/* 32-bit NCM Datagram Pointer Table */
-struct usb_cdc_ncm_ndp32 {
- __le32 dwSignature;
- __le16 wLength;
- __le16 wReserved6;
- __le32 dwNextNdpIndex;
- __le32 dwReserved12;
- struct usb_cdc_ncm_dpe32 dpe32[0];
-} __attribute__ ((packed));
-
-/* CDC NCM subclass 3.2.1 and 3.2.2 */
-#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C
-#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010
-
-/* CDC NCM subclass 3.3.3 Datagram Formatting */
-#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30
-#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31
-
-/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */
-#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00
-#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE
-
-/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */
-#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0)
-#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1)
-#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2)
-#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3)
-#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4)
-#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5)
-
-/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
-#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0)
-#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1)
-
-/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
-#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04
-#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C
-
-/* CDC NCM subclass 6.2.5 SetNtbFormat */
-#define USB_CDC_NCM_NTB16_FORMAT 0x00
-#define USB_CDC_NCM_NTB32_FORMAT 0x01
-
-/* CDC NCM subclass 6.2.7 SetNtbInputSize */
-#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048
-#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048
-
-/* NTB Input Size Structure */
-struct usb_cdc_ncm_ndp_input_size {
- __le32 dwNtbInMaxSize;
- __le16 wNtbInMaxDatagrams;
- __le16 wReserved;
-} __attribute__ ((packed));
-
-/* CDC NCM subclass 6.2.11 SetCrcMode */
-#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00
-#define USB_CDC_NCM_CRC_APPENDED 0x01
-
-#endif /* __LINUX_USB_CDC_H */
+++ /dev/null
-/*
- * This file holds Hub protocol constants and data structures that are
- * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
- *
- * It is used/shared between the USB core, the HCDs and couple of other USB
- * drivers.
- */
-
-#ifndef __LINUX_CH11_H
-#define __LINUX_CH11_H
-
-#include <linux/types.h> /* __u8 etc */
-
-/*
- * Hub request types
- */
-
-#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
-#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
-
-/*
- * Hub class requests
- * See USB 2.0 spec Table 11-16
- */
-#define HUB_CLEAR_TT_BUFFER 8
-#define HUB_RESET_TT 9
-#define HUB_GET_TT_STATE 10
-#define HUB_STOP_TT 11
-
-/*
- * Hub class additional requests defined by USB 3.0 spec
- * See USB 3.0 spec Table 10-6
- */
-#define HUB_SET_DEPTH 12
-#define HUB_GET_PORT_ERR_COUNT 13
-
-/*
- * Hub Class feature numbers
- * See USB 2.0 spec Table 11-17
- */
-#define C_HUB_LOCAL_POWER 0
-#define C_HUB_OVER_CURRENT 1
-
-/*
- * Port feature numbers
- * See USB 2.0 spec Table 11-17
- */
-#define USB_PORT_FEAT_CONNECTION 0
-#define USB_PORT_FEAT_ENABLE 1
-#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */
-#define USB_PORT_FEAT_OVER_CURRENT 3
-#define USB_PORT_FEAT_RESET 4
-#define USB_PORT_FEAT_L1 5 /* L1 suspend */
-#define USB_PORT_FEAT_POWER 8
-#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */
-#define USB_PORT_FEAT_C_CONNECTION 16
-#define USB_PORT_FEAT_C_ENABLE 17
-#define USB_PORT_FEAT_C_SUSPEND 18
-#define USB_PORT_FEAT_C_OVER_CURRENT 19
-#define USB_PORT_FEAT_C_RESET 20
-#define USB_PORT_FEAT_TEST 21
-#define USB_PORT_FEAT_INDICATOR 22
-#define USB_PORT_FEAT_C_PORT_L1 23
-
-/*
- * Port feature selectors added by USB 3.0 spec.
- * See USB 3.0 spec Table 10-7
- */
-#define USB_PORT_FEAT_LINK_STATE 5
-#define USB_PORT_FEAT_U1_TIMEOUT 23
-#define USB_PORT_FEAT_U2_TIMEOUT 24
-#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
-#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
-#define USB_PORT_FEAT_BH_PORT_RESET 28
-#define USB_PORT_FEAT_C_BH_PORT_RESET 29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
-
-#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8)
-
-/* USB 3.0 hub remote wake mask bits, see table 10-14 */
-#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
-#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
-#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10)
-
-/*
- * Hub Status and Hub Change results
- * See USB 2.0 spec Table 11-19 and Table 11-20
- */
-struct usb_port_status {
- __le16 wPortStatus;
- __le16 wPortChange;
-} __attribute__ ((packed));
-
-/*
- * wPortStatus bit field
- * See USB 2.0 spec Table 11-21
- */
-#define USB_PORT_STAT_CONNECTION 0x0001
-#define USB_PORT_STAT_ENABLE 0x0002
-#define USB_PORT_STAT_SUSPEND 0x0004
-#define USB_PORT_STAT_OVERCURRENT 0x0008
-#define USB_PORT_STAT_RESET 0x0010
-#define USB_PORT_STAT_L1 0x0020
-/* bits 6 to 7 are reserved */
-#define USB_PORT_STAT_POWER 0x0100
-#define USB_PORT_STAT_LOW_SPEED 0x0200
-#define USB_PORT_STAT_HIGH_SPEED 0x0400
-#define USB_PORT_STAT_TEST 0x0800
-#define USB_PORT_STAT_INDICATOR 0x1000
-/* bits 13 to 15 are reserved */
-
-/*
- * Additions to wPortStatus bit field from USB 3.0
- * See USB 3.0 spec Table 10-10
- */
-#define USB_PORT_STAT_LINK_STATE 0x01e0
-#define USB_SS_PORT_STAT_POWER 0x0200
-#define USB_SS_PORT_STAT_SPEED 0x1c00
-#define USB_PORT_STAT_SPEED_5GBPS 0x0000
-/* Valid only if port is enabled */
-/* Bits that are the same from USB 2.0 */
-#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
- USB_PORT_STAT_ENABLE | \
- USB_PORT_STAT_OVERCURRENT | \
- USB_PORT_STAT_RESET)
-
-/*
- * Definitions for PORT_LINK_STATE values
- * (bits 5-8) in wPortStatus
- */
-#define USB_SS_PORT_LS_U0 0x0000
-#define USB_SS_PORT_LS_U1 0x0020
-#define USB_SS_PORT_LS_U2 0x0040
-#define USB_SS_PORT_LS_U3 0x0060
-#define USB_SS_PORT_LS_SS_DISABLED 0x0080
-#define USB_SS_PORT_LS_RX_DETECT 0x00a0
-#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0
-#define USB_SS_PORT_LS_POLLING 0x00e0
-#define USB_SS_PORT_LS_RECOVERY 0x0100
-#define USB_SS_PORT_LS_HOT_RESET 0x0120
-#define USB_SS_PORT_LS_COMP_MOD 0x0140
-#define USB_SS_PORT_LS_LOOPBACK 0x0160
-
-/*
- * wPortChange bit field
- * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
- * Bits 0 to 5 shown, bits 6 to 15 are reserved
- */
-#define USB_PORT_STAT_C_CONNECTION 0x0001
-#define USB_PORT_STAT_C_ENABLE 0x0002
-#define USB_PORT_STAT_C_SUSPEND 0x0004
-#define USB_PORT_STAT_C_OVERCURRENT 0x0008
-#define USB_PORT_STAT_C_RESET 0x0010
-#define USB_PORT_STAT_C_L1 0x0020
-/*
- * USB 3.0 wPortChange bit fields
- * See USB 3.0 spec Table 10-11
- */
-#define USB_PORT_STAT_C_BH_RESET 0x0020
-#define USB_PORT_STAT_C_LINK_STATE 0x0040
-#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080
-
-/*
- * wHubCharacteristics (masks)
- * See USB 2.0 spec Table 11-13, offset 3
- */
-#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */
-#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */
-#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
-#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */
-
-#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */
-
-#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */
-#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
-#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
-#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */
-
-#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
-#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */
-
-struct usb_hub_status {
- __le16 wHubStatus;
- __le16 wHubChange;
-} __attribute__ ((packed));
-
-/*
- * Hub Status & Hub Change bit masks
- * See USB 2.0 spec Table 11-19 and Table 11-20
- * Bits 0 and 1 for wHubStatus and wHubChange
- * Bits 2 to 15 are reserved for both
- */
-#define HUB_STATUS_LOCAL_POWER 0x0001
-#define HUB_STATUS_OVERCURRENT 0x0002
-#define HUB_CHANGE_LOCAL_POWER 0x0001
-#define HUB_CHANGE_OVERCURRENT 0x0002
-
-
-/*
- * Hub descriptor
- * See USB 2.0 spec Table 11-13
- */
-
-#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
-#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a)
-#define USB_DT_HUB_NONVAR_SIZE 7
-#define USB_DT_SS_HUB_SIZE 12
-
-/*
- * Hub Device descriptor
- * USB Hub class device protocols
- */
-
-#define USB_HUB_PR_FS 0 /* Full speed hub */
-#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
-#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
-#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
-#define USB_HUB_PR_SS 3 /* Super speed hub */
-
-struct usb_hub_descriptor {
- __u8 bDescLength;
- __u8 bDescriptorType;
- __u8 bNbrPorts;
- __le16 wHubCharacteristics;
- __u8 bPwrOn2PwrGood;
- __u8 bHubContrCurrent;
-
- /* 2.0 and 3.0 hubs differ here */
- union {
- struct {
- /* add 1 bit for hub status change; round to bytes */
- __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
- __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
- } __attribute__ ((packed)) hs;
-
- struct {
- __u8 bHubHdrDecLat;
- __le16 wHubDelay;
- __le16 DeviceRemovable;
- } __attribute__ ((packed)) ss;
- } u;
-} __attribute__ ((packed));
-
-/* port indicator status selectors, tables 11-7 and 11-25 */
-#define HUB_LED_AUTO 0
-#define HUB_LED_AMBER 1
-#define HUB_LED_GREEN 2
-#define HUB_LED_OFF 3
-
-enum hub_led_mode {
- INDICATOR_AUTO = 0,
- INDICATOR_CYCLE,
- /* software blinks for attention: software, hardware, reserved */
- INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
- INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
- INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
-} __attribute__ ((packed));
-
-/* Transaction Translator Think Times, in bits */
-#define HUB_TTTT_8_BITS 0x00
-#define HUB_TTTT_16_BITS 0x20
-#define HUB_TTTT_24_BITS 0x40
-#define HUB_TTTT_32_BITS 0x60
-
-#endif /* __LINUX_CH11_H */
* someone that the two other points are non-issues for that
* particular descriptor type.
*/
-
#ifndef __LINUX_USB_CH9_H
#define __LINUX_USB_CH9_H
-#include <linux/types.h> /* __u8 etc */
-#include <asm/byteorder.h> /* le16_to_cpu */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT 0 /* to device */
-#define USB_DIR_IN 0x80 /* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK (0x03 << 5)
-#define USB_TYPE_STANDARD (0x00 << 5)
-#define USB_TYPE_CLASS (0x01 << 5)
-#define USB_TYPE_VENDOR (0x02 << 5)
-#define USB_TYPE_RESERVED (0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK 0x1f
-#define USB_RECIP_DEVICE 0x00
-#define USB_RECIP_INTERFACE 0x01
-#define USB_RECIP_ENDPOINT 0x02
-#define USB_RECIP_OTHER 0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-#define USB_REQ_SET_SEL 0x30
-#define USB_REQ_SET_ISOCH_DELAY 0x31
-
-#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION 0x0E
-#define USB_REQ_RPIPE_ABORT 0x0E
-#define USB_REQ_SET_HANDSHAKE 0x0F
-#define USB_REQ_RPIPE_RESET 0x0F
-#define USB_REQ_GET_HANDSHAKE 0x10
-#define USB_REQ_SET_CONNECTION 0x11
-#define USB_REQ_SET_SECURITY_DATA 0x12
-#define USB_REQ_GET_SECURITY_DATA 0x13
-#define USB_REQ_SET_WUSB_DATA 0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
-#define USB_REQ_LOOPBACK_DATA_READ 0x16
-#define USB_REQ_SET_INTERFACE_DS 0x17
-
-/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
- * used by hubs to put ports into a new L1 suspend state, except that it
- * forgot to define its number ...
- */
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
- * are at most sixteen features of each type.) Hubs may also support a
- * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
- */
-#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
-#define USB_DEVICE_BATTERY 2 /* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
-
-/*
- * Test Mode Selectors
- * See USB 2.0 spec Table 9-7
- */
-#define TEST_J 1
-#define TEST_K 2
-#define TEST_SE0_NAK 3
-#define TEST_PACKET 4
-#define TEST_FORCE_EN 5
-
-/*
- * New Feature Selectors as added by USB 3.0
- * See USB 3.0 spec Table 9-6
- */
-#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
-#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
-#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
-#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
-
-#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
-/*
- * Suspend Options, Table 9-7 USB 3.0 spec
- */
-#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
-#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
-
-#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
-
-/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
-#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
-#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
-#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device. It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
- __u8 bRequestType;
- __u8 bRequest;
- __le16 wValue;
- __le16 wIndex;
- __le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". Within the kernel and when exposed
- * through the Linux-USB APIs, they are not converted to cpu byte
- * order; it is the responsibility of the client code to do this.
- * The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
- * in this case the fields are converted to host endianness by the kernel.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-#define USB_DT_DEVICE_QUALIFIER 0x06
-#define USB_DT_OTHER_SPEED_CONFIG 0x07
-#define USB_DT_INTERFACE_POWER 0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG 0x09
-#define USB_DT_DEBUG 0x0a
-#define USB_DT_INTERFACE_ASSOCIATION 0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY 0x0c
-#define USB_DT_KEY 0x0d
-#define USB_DT_ENCRYPTION_TYPE 0x0e
-#define USB_DT_BOS 0x0f
-#define USB_DT_DEVICE_CAPABILITY 0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
-#define USB_DT_WIRE_ADAPTER 0x21
-#define USB_DT_RPIPE 0x22
-#define USB_DT_CS_RADIO_CONTROL 0x23
-/* From the T10 UAS specification */
-#define USB_DT_PIPE_USAGE 0x24
-/* From the USB 3.0 spec */
-#define USB_DT_SS_ENDPOINT_COMP 0x30
-
-/* Conventional codes for class-specific descriptors. The convention is
- * defined in the USB "Common Class" Spec (3.11). Individual class specs
- * are authoritative for their usage, not the "common class" writeup.
- */
-#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
-#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
-#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
-#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
-#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
- __u8 bLength;
- __u8 bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __le16 idVendor;
- __le16 idProduct;
- __le16 bcdDevice;
- __u8 iManufacturer;
- __u8 iProduct;
- __u8 iSerialNumber;
- __u8 bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE 18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
-#define USB_CLASS_AUDIO 1
-#define USB_CLASS_COMM 2
-#define USB_CLASS_HID 3
-#define USB_CLASS_PHYSICAL 5
-#define USB_CLASS_STILL_IMAGE 6
-#define USB_CLASS_PRINTER 7
-#define USB_CLASS_MASS_STORAGE 8
-#define USB_CLASS_HUB 9
-#define USB_CLASS_CDC_DATA 0x0a
-#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
-#define USB_CLASS_VIDEO 0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
-#define USB_CLASS_MISC 0xef
-#define USB_CLASS_APP_SPEC 0xfe
-#define USB_CLASS_VENDOR_SPEC 0xff
-
-#define USB_SUBCLASS_VENDOR_SPEC 0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different. Highspeed-capable devices can look
- * different depending on what speed they're currently running. Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumInterfaces;
- __u8 bConfigurationValue;
- __u8 iConfiguration;
- __u8 bmAttributes;
- __u8 bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE 9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
-#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
-#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
-#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wData[1]; /* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- __u8 bNumEndpoints;
- __u8 bInterfaceClass;
- __u8 bInterfaceSubClass;
- __u8 bInterfaceProtocol;
- __u8 iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE 9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-
- /* NOTE: these two are _only_ in audio endpoints. */
- /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
- __u8 bRefresh;
- __u8 bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE 7
-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK 0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL 0
-#define USB_ENDPOINT_XFER_ISOC 1
-#define USB_ENDPOINT_XFER_BULK 2
-#define USB_ENDPOINT_XFER_INT 3
-#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
-
-/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
-#define USB_ENDPOINT_INTRTYPE 0x30
-#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
-#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
-
-#define USB_ENDPOINT_SYNCTYPE 0x0c
-#define USB_ENDPOINT_SYNC_NONE (0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
-
-#define USB_ENDPOINT_USAGE_MASK 0x30
-#define USB_ENDPOINT_USAGE_DATA 0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_maxp - get endpoint's max packet size
- * @epd: endpoint to be checked
- *
- * Returns @epd's max packet
- */
-static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
-{
- return __le16_to_cpu(epd->wMaxPacketSize);
-}
-
-static inline int usb_endpoint_interrupt_type(
- const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
-struct usb_ss_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bmAttributes;
- __le16 wBytesPerInterval;
-} __attribute__ ((packed));
-
-#define USB_DT_SS_EP_COMP_SIZE 6
-
-/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-static inline int
-usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
-{
- int max_streams;
-
- if (!comp)
- return 0;
-
- max_streams = comp->bmAttributes & 0x1f;
-
- if (!max_streams)
- return 0;
-
- max_streams = 1 << max_streams;
-
- return max_streams;
-}
-
-/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
-#define USB_SS_MULT(p) (1 + ((p) & 0x3))
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __u8 bNumConfigurations;
- __u8 bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bmAttributes; /* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP (1 << 0)
-#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- /* bulk endpoints with 8 byte maxpacket */
- __u8 bDebugInEndpoint;
- __u8 bDebugOutEndpoint;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bFirstInterface;
- __u8 bInterfaceCount;
- __u8 bFunctionClass;
- __u8 bFunctionSubClass;
- __u8 bFunctionProtocol;
- __u8 iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY: group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumEncryptionTypes;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 bKeyData[0];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEncryptionType;
-#define USB_ENC_TYPE_UNSECURE 0
-#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
-#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
-#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
- __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
- __u8 bAuthKeyIndex;
-} __attribute__((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS: group of device-level capabilities */
-struct usb_bos_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumDeviceCaps;
-} __attribute__((packed));
-
-#define USB_DT_BOS_SIZE 5
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
-struct usb_dev_cap_header {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-} __attribute__((packed));
-
-#define USB_CAP_TYPE_WIRELESS_USB 1
-
-struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-
- __u8 bmAttributes;
-#define USB_WIRELESS_P2P_DRD (1 << 1)
-#define USB_WIRELESS_BEACON_MASK (3 << 2)
-#define USB_WIRELESS_BEACON_SELF (1 << 2)
-#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
-#define USB_WIRELESS_BEACON_NONE (3 << 2)
- __le16 wPHYRates; /* bit rates, Mbps */
-#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
-#define USB_WIRELESS_PHY_80 (1 << 1)
-#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
-#define USB_WIRELESS_PHY_160 (1 << 3)
-#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
-#define USB_WIRELESS_PHY_320 (1 << 5)
-#define USB_WIRELESS_PHY_400 (1 << 6)
-#define USB_WIRELESS_PHY_480 (1 << 7)
- __u8 bmTFITXPowerInfo; /* TFI power levels */
- __u8 bmFFITXPowerInfo; /* FFI power levels */
- __le16 bmBandGroup;
- __u8 bReserved;
-} __attribute__((packed));
-
-/* USB 2.0 Extension descriptor */
-#define USB_CAP_TYPE_EXT 2
-
-struct usb_ext_cap_descriptor { /* Link Power Management */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __le32 bmAttributes;
-#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
-#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
-#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
-#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
-#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
-#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
-} __attribute__((packed));
-
-#define USB_DT_USB_EXT_CAP_SIZE 7
-
-/*
- * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
- * specific device level capabilities
- */
-#define USB_SS_CAP_TYPE 3
-struct usb_ss_cap_descriptor { /* Link Power Management */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __u8 bmAttributes;
-#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
- __le16 wSpeedSupported;
-#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
-#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
-#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
-#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
- __u8 bFunctionalitySupport;
- __u8 bU1devExitLat;
- __le16 bU2DevExitLat;
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CAP_SIZE 10
-
-/*
- * Container ID Capability descriptor: Defines the instance unique ID used to
- * identify the instance across all operating modes
- */
-#define CONTAINER_ID_TYPE 4
-struct usb_ss_container_id_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __u8 bReserved;
- __u8 ContainerID[16]; /* 128-bit number */
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CONTN_ID_SIZE 20
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bMaxSequence;
- __le16 wMaxStreamDelay;
- __le16 wOverTheAirPacketSize;
- __u8 bOverTheAirInterval;
- __u8 bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO 0
-#define USB_ENDPOINT_SWITCH_SWITCH 1
-#define USB_ENDPOINT_SWITCH_SCALE 2
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys. The handshake depends on a CC.
- */
-struct usb_handshake {
- __u8 bMessageNumber;
- __u8 bStatus;
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 CDID[16];
- __u8 nonce[16];
- __u8 MIC[8];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
- __u8 CHID[16]; /* persistent host id */
- __u8 CDID[16]; /* device id (unique w/in host context) */
- __u8 CK[16]; /* connection key */
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
+#include <uapi/linux/usb/ch9.h>
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
- USB_SPEED_UNKNOWN = 0, /* enumerating */
- USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
- USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
- USB_SPEED_SUPER, /* usb 3.0 */
-};
-
-#ifdef __KERNEL__
/**
* usb_speed_string() - Returns human readable-name of the speed.
*/
extern const char *usb_speed_string(enum usb_device_speed speed);
-#endif
-
-enum usb_device_state {
- /* NOTATTACHED isn't in the USB spec, and this state acts
- * the same as ATTACHED ... but it's clearer this way.
- */
- USB_STATE_NOTATTACHED = 0,
-
- /* chapter 9 and authentication (wireless) device states */
- USB_STATE_ATTACHED,
- USB_STATE_POWERED, /* wired */
- USB_STATE_RECONNECTING, /* auth */
- USB_STATE_UNAUTHENTICATED, /* auth */
- USB_STATE_DEFAULT, /* limited function */
- USB_STATE_ADDRESS,
- USB_STATE_CONFIGURED, /* most functions */
-
- USB_STATE_SUSPENDED
-
- /* NOTE: there are actually four different SUSPENDED
- * states, returning to POWERED, DEFAULT, ADDRESS, or
- * CONFIGURED respectively when SOF tokens flow again.
- * At this level there's no difference between L1 and L2
- * suspend states. (L2 being original USB 1.1 suspend.)
- */
-};
-
-enum usb3_link_state {
- USB3_LPM_U0 = 0,
- USB3_LPM_U1,
- USB3_LPM_U2,
- USB3_LPM_U3
-};
-
-/*
- * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
- * 0xff means the parent hub will accept transitions to U1, but will not
- * initiate a transition.
- *
- * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
- * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
- * values.
- *
- * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
- * 0xff means the parent hub will accept transitions to U2, but will not
- * initiate a transition.
- *
- * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
- * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
- * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
- * 65.024ms.
- */
-#define USB3_LPM_DISABLED 0x0
-#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
-#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
-#define USB3_LPM_DEVICE_INITIATED 0xFF
-
-struct usb_set_sel_req {
- __u8 u1_sel;
- __u8 u1_pel;
- __le16 u2_sel;
- __le16 u2_pel;
-} __attribute__ ((packed));
-
-/*
- * The Set System Exit Latency control transfer provides one byte each for
- * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
- * are two bytes long.
- */
-#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
-#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * As per USB compliance update, a device that is actively drawing
- * more than 100mA from USB must report itself as bus-powered in
- * the GetStatus(DEVICE) call.
- * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
- */
-#define USB_SELF_POWER_VBUS_MAX_DRAW 100
-
#endif /* __LINUX_USB_CH9_H */
#ifndef __LINUX_FUNCTIONFS_H__
#define __LINUX_FUNCTIONFS_H__ 1
+#include <uapi/linux/usb/functionfs.h>
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
-
-enum {
- FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
- FUNCTIONFS_STRINGS_MAGIC = 2
-};
-
-
-#ifndef __KERNEL__
-
-/* Descriptor of an non-audio endpoint */
-struct usb_endpoint_descriptor_no_audio {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-} __attribute__((packed));
-
-
-/*
- * All numbers must be in little endian order.
- */
-
-struct usb_functionfs_descs_head {
- __le32 magic;
- __le32 length;
- __le32 fs_count;
- __le32 hs_count;
-} __attribute__((packed));
-
-/*
- * Descriptors format:
- *
- * | off | name | type | description |
- * |-----+-----------+--------------+--------------------------------------|
- * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
- * | 4 | length | LE32 | length of the whole data chunk |
- * | 8 | fs_count | LE32 | number of full-speed descriptors |
- * | 12 | hs_count | LE32 | number of high-speed descriptors |
- * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors |
- * | | hs_descrs | Descriptor[] | list of high-speed descriptors |
- *
- * descs are just valid USB descriptors and have the following format:
- *
- * | off | name | type | description |
- * |-----+-----------------+------+--------------------------|
- * | 0 | bLength | U8 | length of the descriptor |
- * | 1 | bDescriptorType | U8 | descriptor type |
- * | 2 | payload | | descriptor's payload |
- */
-
-struct usb_functionfs_strings_head {
- __le32 magic;
- __le32 length;
- __le32 str_count;
- __le32 lang_count;
-} __attribute__((packed));
-
-/*
- * Strings format:
- *
- * | off | name | type | description |
- * |-----+------------+-----------------------+----------------------------|
- * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC |
- * | 4 | length | LE32 | length of the data chunk |
- * | 8 | str_count | LE32 | number of strings |
- * | 12 | lang_count | LE32 | number of languages |
- * | 16 | stringtab | StringTab[lang_count] | table of strings per lang |
- *
- * For each language there is one stringtab entry (ie. there are lang_count
- * stringtab entires). Each StringTab has following format:
- *
- * | off | name | type | description |
- * |-----+---------+-------------------+------------------------------------|
- * | 0 | lang | LE16 | language code |
- * | 2 | strings | String[str_count] | array of strings in given language |
- *
- * For each string there is one strings entry (ie. there are str_count
- * string entries). Each String is a NUL terminated string encoded in
- * UTF-8.
- */
-
-#endif
-
-
-/*
- * Events are delivered on the ep0 file descriptor, when the user mode driver
- * reads from this file descriptor after writing the descriptors. Don't
- * stop polling this descriptor.
- */
-
-enum usb_functionfs_event_type {
- FUNCTIONFS_BIND,
- FUNCTIONFS_UNBIND,
-
- FUNCTIONFS_ENABLE,
- FUNCTIONFS_DISABLE,
-
- FUNCTIONFS_SETUP,
-
- FUNCTIONFS_SUSPEND,
- FUNCTIONFS_RESUME
-};
-
-/* NOTE: this structure must stay the same size and layout on
- * both 32-bit and 64-bit kernels.
- */
-struct usb_functionfs_event {
- union {
- /* SETUP: packet; DATA phase i/o precedes next event
- *(setup.bmRequestType & USB_DIR_IN) flags direction */
- struct usb_ctrlrequest setup;
- } __attribute__((packed)) u;
-
- /* enum usb_functionfs_event_type */
- __u8 type;
- __u8 _pad[3];
-} __attribute__((packed));
-
-
-/* Endpoint ioctls */
-/* The same as in gadgetfs */
-
-/* IN transfers may be reported to the gadget driver as complete
- * when the fifo is loaded, before the host reads the data;
- * OUT transfers may be reported to the host's "client" driver as
- * complete when they're sitting in the FIFO unread.
- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
- * (needed for precise fault handling, when the hardware allows it)
- */
-#define FUNCTIONFS_FIFO_STATUS _IO('g', 1)
-
-/* discards any unclaimed data in the fifo. */
-#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2)
-
-/* resets endpoint halt+toggle; used to implement set_interface.
- * some hardware (like pxa2xx) can't support this.
- */
-#define FUNCTIONFS_CLEAR_HALT _IO('g', 3)
-
-/* Specific for functionfs */
-
-/*
- * Returns reverse mapping of an interface. Called on EP0. If there
- * is no such interface returns -EDOM. If function is not active
- * returns -ENODEV.
- */
-#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128)
-
-/*
- * Returns real bEndpointAddress of an endpoint. If function is not
- * active returns -ENODEV.
- */
-#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129)
-
-
-#ifdef __KERNEL__
struct ffs_data;
struct usb_composite_dev;
#endif
-
-#endif
+++ /dev/null
-/*
- * g_printer.h -- Header file for USB Printer gadget driver
- *
- * Copyright (C) 2007 Craig W. Nadler
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_USB_G_PRINTER_H
-#define __LINUX_USB_G_PRINTER_H
-
-#define PRINTER_NOT_ERROR 0x08
-#define PRINTER_SELECTED 0x10
-#define PRINTER_PAPER_EMPTY 0x20
-
-/* The 'g' code is also used by gadgetfs ioctl requests.
- * Don't add any colliding codes to either driver, and keep
- * them in unique ranges (size 0x20 for now).
- */
-#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char)
-#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char)
-
-#endif /* __LINUX_USB_G_PRINTER_H */
+++ /dev/null
-/*
- * Filesystem based user-mode API to USB Gadget controller hardware
- *
- * Other than ep0 operations, most things are done by read() and write()
- * on endpoint files found in one directory. They are configured by
- * writing descriptors, and then may be used for normal stream style
- * i/o requests. When ep0 is configured, the device can enumerate;
- * when it's closed, the device disconnects from usb. Operations on
- * ep0 require ioctl() operations.
- *
- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
- * which may then be used to read usb_gadgetfs_event structs. The driver
- * may activate endpoints as it handles SET_CONFIGURATION setup events,
- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
- * then performing data transfers by reading or writing.
- */
-
-#ifndef __LINUX_USB_GADGETFS_H
-#define __LINUX_USB_GADGETFS_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
-/*
- * Events are delivered on the ep0 file descriptor, when the user mode driver
- * reads from this file descriptor after writing the descriptors. Don't
- * stop polling this descriptor.
- */
-
-enum usb_gadgetfs_event_type {
- GADGETFS_NOP = 0,
-
- GADGETFS_CONNECT,
- GADGETFS_DISCONNECT,
- GADGETFS_SETUP,
- GADGETFS_SUSPEND,
- /* and likely more ! */
-};
-
-/* NOTE: this structure must stay the same size and layout on
- * both 32-bit and 64-bit kernels.
- */
-struct usb_gadgetfs_event {
- union {
- /* NOP, DISCONNECT, SUSPEND: nothing
- * ... some hardware can't report disconnection
- */
-
- /* CONNECT: just the speed */
- enum usb_device_speed speed;
-
- /* SETUP: packet; DATA phase i/o precedes next event
- *(setup.bmRequestType & USB_DIR_IN) flags direction
- * ... includes SET_CONFIGURATION, SET_INTERFACE
- */
- struct usb_ctrlrequest setup;
- } u;
- enum usb_gadgetfs_event_type type;
-};
-
-
-/* The 'g' code is also used by printer gadget ioctl requests.
- * Don't add any colliding codes to either driver, and keep
- * them in unique ranges (size 0x20 for now).
- */
-
-/* endpoint ioctls */
-
-/* IN transfers may be reported to the gadget driver as complete
- * when the fifo is loaded, before the host reads the data;
- * OUT transfers may be reported to the host's "client" driver as
- * complete when they're sitting in the FIFO unread.
- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
- * (needed for precise fault handling, when the hardware allows it)
- */
-#define GADGETFS_FIFO_STATUS _IO('g', 1)
-
-/* discards any unclaimed data in the fifo. */
-#define GADGETFS_FIFO_FLUSH _IO('g', 2)
-
-/* resets endpoint halt+toggle; used to implement set_interface.
- * some hardware (like pxa2xx) can't support this.
- */
-#define GADGETFS_CLEAR_HALT _IO('g', 3)
-
-#endif /* __LINUX_USB_GADGETFS_H */
+++ /dev/null
-/*
- * <linux/usb/midi.h> -- USB MIDI definitions.
- *
- * Copyright (C) 2006 Thumtronics Pty Ltd.
- * Developed for Thumtronics by Grey Innovation
- * Ben Williamson <ben.williamson@greyinnovation.com>
- *
- * This software is distributed under the terms of the GNU General Public
- * License ("GPL") version 2, as published by the Free Software Foundation.
- *
- * This file holds USB constants and structures defined
- * by the USB Device Class Definition for MIDI Devices.
- * Comments below reference relevant sections of that document:
- *
- * http://www.usb.org/developers/devclass_docs/midi10.pdf
- */
-
-#ifndef __LINUX_USB_MIDI_H
-#define __LINUX_USB_MIDI_H
-
-#include <linux/types.h>
-
-/* A.1 MS Class-Specific Interface Descriptor Subtypes */
-#define USB_MS_HEADER 0x01
-#define USB_MS_MIDI_IN_JACK 0x02
-#define USB_MS_MIDI_OUT_JACK 0x03
-#define USB_MS_ELEMENT 0x04
-
-/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */
-#define USB_MS_GENERAL 0x01
-
-/* A.3 MS MIDI IN and OUT Jack Types */
-#define USB_MS_EMBEDDED 0x01
-#define USB_MS_EXTERNAL 0x02
-
-/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */
-struct usb_ms_header_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __le16 bcdMSC;
- __le16 wTotalLength;
-} __attribute__ ((packed));
-
-#define USB_DT_MS_HEADER_SIZE 7
-
-/* 6.1.2.2 MIDI IN Jack Descriptor */
-struct usb_midi_in_jack_descriptor {
- __u8 bLength;
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */
- __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */
- __u8 bJackID;
- __u8 iJack;
-} __attribute__ ((packed));
-
-#define USB_DT_MIDI_IN_SIZE 6
-
-struct usb_midi_source_pin {
- __u8 baSourceID;
- __u8 baSourcePin;
-} __attribute__ ((packed));
-
-/* 6.1.2.3 MIDI OUT Jack Descriptor */
-struct usb_midi_out_jack_descriptor {
- __u8 bLength;
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */
- __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */
- __u8 bJackID;
- __u8 bNrInputPins; /* p */
- struct usb_midi_source_pin pins[]; /* [p] */
- /*__u8 iJack; -- omitted due to variable-sized pins[] */
-} __attribute__ ((packed));
-
-#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \
-struct usb_midi_out_jack_descriptor_##p { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __u8 bJackType; \
- __u8 bJackID; \
- __u8 bNrInputPins; \
- struct usb_midi_source_pin pins[p]; \
- __u8 iJack; \
-} __attribute__ ((packed))
-
-/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */
-struct usb_ms_endpoint_descriptor {
- __u8 bLength; /* 4+n */
- __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
- __u8 bDescriptorSubtype; /* USB_MS_GENERAL */
- __u8 bNumEmbMIDIJack; /* n */
- __u8 baAssocJackID[]; /* [n] */
-} __attribute__ ((packed));
-
-#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \
-struct usb_ms_endpoint_descriptor_##n { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __u8 bNumEmbMIDIJack; \
- __u8 baAssocJackID[n]; \
-} __attribute__ ((packed))
-
-#endif /* __LINUX_USB_MIDI_H */
+++ /dev/null
-/*
- * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
- * Copyright (C) 2008 Novell, Inc.
- * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This file holds USB constants defined by the USB Device Class
- * Definition for Test and Measurement devices published by the USB-IF.
- *
- * It also has the ioctl definitions for the usbtmc kernel driver that
- * userspace needs to know about.
- */
-
-#ifndef __LINUX_USB_TMC_H
-#define __LINUX_USB_TMC_H
-
-/* USB TMC status values */
-#define USBTMC_STATUS_SUCCESS 0x01
-#define USBTMC_STATUS_PENDING 0x02
-#define USBTMC_STATUS_FAILED 0x80
-#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81
-#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82
-#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83
-
-/* USB TMC requests values */
-#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1
-#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2
-#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3
-#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4
-#define USBTMC_REQUEST_INITIATE_CLEAR 5
-#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6
-#define USBTMC_REQUEST_GET_CAPABILITIES 7
-#define USBTMC_REQUEST_INDICATOR_PULSE 64
-
-/* Request values for USBTMC driver's ioctl entry point */
-#define USBTMC_IOC_NR 91
-#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1)
-#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2)
-#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3)
-#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4)
-#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6)
-#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7)
-
-#endif
+++ /dev/null
-/*
- * USB Video Class definitions.
- *
- * Copyright (C) 2009 Laurent Pinchart <laurent.pinchart@skynet.be>
- *
- * This file holds USB constants and structures defined by the USB Device
- * Class Definition for Video Devices. Unless otherwise stated, comments
- * below reference relevant sections of the USB Video Class 1.1 specification
- * available at
- *
- * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip
- */
-
-#ifndef __LINUX_USB_VIDEO_H
-#define __LINUX_USB_VIDEO_H
-
-#include <linux/types.h>
-
-/* --------------------------------------------------------------------------
- * UVC constants
- */
-
-/* A.2. Video Interface Subclass Codes */
-#define UVC_SC_UNDEFINED 0x00
-#define UVC_SC_VIDEOCONTROL 0x01
-#define UVC_SC_VIDEOSTREAMING 0x02
-#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03
-
-/* A.3. Video Interface Protocol Codes */
-#define UVC_PC_PROTOCOL_UNDEFINED 0x00
-
-/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */
-#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00
-#define UVC_VC_HEADER 0x01
-#define UVC_VC_INPUT_TERMINAL 0x02
-#define UVC_VC_OUTPUT_TERMINAL 0x03
-#define UVC_VC_SELECTOR_UNIT 0x04
-#define UVC_VC_PROCESSING_UNIT 0x05
-#define UVC_VC_EXTENSION_UNIT 0x06
-
-/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */
-#define UVC_VS_UNDEFINED 0x00
-#define UVC_VS_INPUT_HEADER 0x01
-#define UVC_VS_OUTPUT_HEADER 0x02
-#define UVC_VS_STILL_IMAGE_FRAME 0x03
-#define UVC_VS_FORMAT_UNCOMPRESSED 0x04
-#define UVC_VS_FRAME_UNCOMPRESSED 0x05
-#define UVC_VS_FORMAT_MJPEG 0x06
-#define UVC_VS_FRAME_MJPEG 0x07
-#define UVC_VS_FORMAT_MPEG2TS 0x0a
-#define UVC_VS_FORMAT_DV 0x0c
-#define UVC_VS_COLORFORMAT 0x0d
-#define UVC_VS_FORMAT_FRAME_BASED 0x10
-#define UVC_VS_FRAME_FRAME_BASED 0x11
-#define UVC_VS_FORMAT_STREAM_BASED 0x12
-
-/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */
-#define UVC_EP_UNDEFINED 0x00
-#define UVC_EP_GENERAL 0x01
-#define UVC_EP_ENDPOINT 0x02
-#define UVC_EP_INTERRUPT 0x03
-
-/* A.8. Video Class-Specific Request Codes */
-#define UVC_RC_UNDEFINED 0x00
-#define UVC_SET_CUR 0x01
-#define UVC_GET_CUR 0x81
-#define UVC_GET_MIN 0x82
-#define UVC_GET_MAX 0x83
-#define UVC_GET_RES 0x84
-#define UVC_GET_LEN 0x85
-#define UVC_GET_INFO 0x86
-#define UVC_GET_DEF 0x87
-
-/* A.9.1. VideoControl Interface Control Selectors */
-#define UVC_VC_CONTROL_UNDEFINED 0x00
-#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01
-#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02
-
-/* A.9.2. Terminal Control Selectors */
-#define UVC_TE_CONTROL_UNDEFINED 0x00
-
-/* A.9.3. Selector Unit Control Selectors */
-#define UVC_SU_CONTROL_UNDEFINED 0x00
-#define UVC_SU_INPUT_SELECT_CONTROL 0x01
-
-/* A.9.4. Camera Terminal Control Selectors */
-#define UVC_CT_CONTROL_UNDEFINED 0x00
-#define UVC_CT_SCANNING_MODE_CONTROL 0x01
-#define UVC_CT_AE_MODE_CONTROL 0x02
-#define UVC_CT_AE_PRIORITY_CONTROL 0x03
-#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04
-#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05
-#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06
-#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07
-#define UVC_CT_FOCUS_AUTO_CONTROL 0x08
-#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09
-#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a
-#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b
-#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c
-#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d
-#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e
-#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f
-#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10
-#define UVC_CT_PRIVACY_CONTROL 0x11
-
-/* A.9.5. Processing Unit Control Selectors */
-#define UVC_PU_CONTROL_UNDEFINED 0x00
-#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01
-#define UVC_PU_BRIGHTNESS_CONTROL 0x02
-#define UVC_PU_CONTRAST_CONTROL 0x03
-#define UVC_PU_GAIN_CONTROL 0x04
-#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05
-#define UVC_PU_HUE_CONTROL 0x06
-#define UVC_PU_SATURATION_CONTROL 0x07
-#define UVC_PU_SHARPNESS_CONTROL 0x08
-#define UVC_PU_GAMMA_CONTROL 0x09
-#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a
-#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b
-#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c
-#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d
-#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e
-#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f
-#define UVC_PU_HUE_AUTO_CONTROL 0x10
-#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11
-#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12
-
-/* A.9.7. VideoStreaming Interface Control Selectors */
-#define UVC_VS_CONTROL_UNDEFINED 0x00
-#define UVC_VS_PROBE_CONTROL 0x01
-#define UVC_VS_COMMIT_CONTROL 0x02
-#define UVC_VS_STILL_PROBE_CONTROL 0x03
-#define UVC_VS_STILL_COMMIT_CONTROL 0x04
-#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05
-#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06
-#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07
-#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
-#define UVC_VS_SYNC_DELAY_CONTROL 0x09
-
-/* B.1. USB Terminal Types */
-#define UVC_TT_VENDOR_SPECIFIC 0x0100
-#define UVC_TT_STREAMING 0x0101
-
-/* B.2. Input Terminal Types */
-#define UVC_ITT_VENDOR_SPECIFIC 0x0200
-#define UVC_ITT_CAMERA 0x0201
-#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202
-
-/* B.3. Output Terminal Types */
-#define UVC_OTT_VENDOR_SPECIFIC 0x0300
-#define UVC_OTT_DISPLAY 0x0301
-#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302
-
-/* B.4. External Terminal Types */
-#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400
-#define UVC_COMPOSITE_CONNECTOR 0x0401
-#define UVC_SVIDEO_CONNECTOR 0x0402
-#define UVC_COMPONENT_CONNECTOR 0x0403
-
-/* 2.4.2.2. Status Packet Type */
-#define UVC_STATUS_TYPE_CONTROL 1
-#define UVC_STATUS_TYPE_STREAMING 2
-
-/* 2.4.3.3. Payload Header Information */
-#define UVC_STREAM_EOH (1 << 7)
-#define UVC_STREAM_ERR (1 << 6)
-#define UVC_STREAM_STI (1 << 5)
-#define UVC_STREAM_RES (1 << 4)
-#define UVC_STREAM_SCR (1 << 3)
-#define UVC_STREAM_PTS (1 << 2)
-#define UVC_STREAM_EOF (1 << 1)
-#define UVC_STREAM_FID (1 << 0)
-
-/* 4.1.2. Control Capabilities */
-#define UVC_CONTROL_CAP_GET (1 << 0)
-#define UVC_CONTROL_CAP_SET (1 << 1)
-#define UVC_CONTROL_CAP_DISABLED (1 << 2)
-#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3)
-#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4)
-
-/* ------------------------------------------------------------------------
- * UVC structures
- */
-
-/* All UVC descriptors have these 3 fields at the beginning */
-struct uvc_descriptor_header {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
-} __attribute__((packed));
-
-/* 3.7.2. Video Control Interface Header Descriptor */
-struct uvc_header_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u16 bcdUVC;
- __u16 wTotalLength;
- __u32 dwClockFrequency;
- __u8 bInCollection;
- __u8 baInterfaceNr[];
-} __attribute__((__packed__));
-
-#define UVC_DT_HEADER_SIZE(n) (12+(n))
-
-#define UVC_HEADER_DESCRIPTOR(n) \
- uvc_header_descriptor_##n
-
-#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \
-struct UVC_HEADER_DESCRIPTOR(n) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u16 bcdUVC; \
- __u16 wTotalLength; \
- __u32 dwClockFrequency; \
- __u8 bInCollection; \
- __u8 baInterfaceNr[n]; \
-} __attribute__ ((packed))
-
-/* 3.7.2.1. Input Terminal Descriptor */
-struct uvc_input_terminal_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bTerminalID;
- __u16 wTerminalType;
- __u8 bAssocTerminal;
- __u8 iTerminal;
-} __attribute__((__packed__));
-
-#define UVC_DT_INPUT_TERMINAL_SIZE 8
-
-/* 3.7.2.2. Output Terminal Descriptor */
-struct uvc_output_terminal_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bTerminalID;
- __u16 wTerminalType;
- __u8 bAssocTerminal;
- __u8 bSourceID;
- __u8 iTerminal;
-} __attribute__((__packed__));
-
-#define UVC_DT_OUTPUT_TERMINAL_SIZE 9
-
-/* 3.7.2.3. Camera Terminal Descriptor */
-struct uvc_camera_terminal_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bTerminalID;
- __u16 wTerminalType;
- __u8 bAssocTerminal;
- __u8 iTerminal;
- __u16 wObjectiveFocalLengthMin;
- __u16 wObjectiveFocalLengthMax;
- __u16 wOcularFocalLength;
- __u8 bControlSize;
- __u8 bmControls[3];
-} __attribute__((__packed__));
-
-#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n))
-
-/* 3.7.2.4. Selector Unit Descriptor */
-struct uvc_selector_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bUnitID;
- __u8 bNrInPins;
- __u8 baSourceID[0];
- __u8 iSelector;
-} __attribute__((__packed__));
-
-#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n))
-
-#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \
- uvc_selector_unit_descriptor_##n
-
-#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \
-struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u8 bUnitID; \
- __u8 bNrInPins; \
- __u8 baSourceID[n]; \
- __u8 iSelector; \
-} __attribute__ ((packed))
-
-/* 3.7.2.5. Processing Unit Descriptor */
-struct uvc_processing_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bUnitID;
- __u8 bSourceID;
- __u16 wMaxMultiplier;
- __u8 bControlSize;
- __u8 bmControls[2];
- __u8 iProcessing;
-} __attribute__((__packed__));
-
-#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n))
-
-/* 3.7.2.6. Extension Unit Descriptor */
-struct uvc_extension_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bUnitID;
- __u8 guidExtensionCode[16];
- __u8 bNumControls;
- __u8 bNrInPins;
- __u8 baSourceID[0];
- __u8 bControlSize;
- __u8 bmControls[0];
- __u8 iExtension;
-} __attribute__((__packed__));
-
-#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n))
-
-#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
- uvc_extension_unit_descriptor_##p_##n
-
-#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
-struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u8 bUnitID; \
- __u8 guidExtensionCode[16]; \
- __u8 bNumControls; \
- __u8 bNrInPins; \
- __u8 baSourceID[p]; \
- __u8 bControlSize; \
- __u8 bmControls[n]; \
- __u8 iExtension; \
-} __attribute__ ((packed))
-
-/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */
-struct uvc_control_endpoint_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u16 wMaxTransferSize;
-} __attribute__((__packed__));
-
-#define UVC_DT_CONTROL_ENDPOINT_SIZE 5
-
-/* 3.9.2.1. Input Header Descriptor */
-struct uvc_input_header_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bNumFormats;
- __u16 wTotalLength;
- __u8 bEndpointAddress;
- __u8 bmInfo;
- __u8 bTerminalLink;
- __u8 bStillCaptureMethod;
- __u8 bTriggerSupport;
- __u8 bTriggerUsage;
- __u8 bControlSize;
- __u8 bmaControls[];
-} __attribute__((__packed__));
-
-#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p))
-
-#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
- uvc_input_header_descriptor_##n_##p
-
-#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
-struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u8 bNumFormats; \
- __u16 wTotalLength; \
- __u8 bEndpointAddress; \
- __u8 bmInfo; \
- __u8 bTerminalLink; \
- __u8 bStillCaptureMethod; \
- __u8 bTriggerSupport; \
- __u8 bTriggerUsage; \
- __u8 bControlSize; \
- __u8 bmaControls[p][n]; \
-} __attribute__ ((packed))
-
-/* 3.9.2.2. Output Header Descriptor */
-struct uvc_output_header_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bNumFormats;
- __u16 wTotalLength;
- __u8 bEndpointAddress;
- __u8 bTerminalLink;
- __u8 bControlSize;
- __u8 bmaControls[];
-} __attribute__((__packed__));
-
-#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p))
-
-#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
- uvc_output_header_descriptor_##n_##p
-
-#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
-struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u8 bNumFormats; \
- __u16 wTotalLength; \
- __u8 bEndpointAddress; \
- __u8 bTerminalLink; \
- __u8 bControlSize; \
- __u8 bmaControls[p][n]; \
-} __attribute__ ((packed))
-
-/* 3.9.2.6. Color matching descriptor */
-struct uvc_color_matching_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bColorPrimaries;
- __u8 bTransferCharacteristics;
- __u8 bMatrixCoefficients;
-} __attribute__((__packed__));
-
-#define UVC_DT_COLOR_MATCHING_SIZE 6
-
-/* 4.3.1.1. Video Probe and Commit Controls */
-struct uvc_streaming_control {
- __u16 bmHint;
- __u8 bFormatIndex;
- __u8 bFrameIndex;
- __u32 dwFrameInterval;
- __u16 wKeyFrameRate;
- __u16 wPFrameRate;
- __u16 wCompQuality;
- __u16 wCompWindowSize;
- __u16 wDelay;
- __u32 dwMaxVideoFrameSize;
- __u32 dwMaxPayloadTransferSize;
- __u32 dwClockFrequency;
- __u8 bmFramingInfo;
- __u8 bPreferedVersion;
- __u8 bMinVersion;
- __u8 bMaxVersion;
-} __attribute__((__packed__));
-
-/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */
-struct uvc_format_uncompressed {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bFormatIndex;
- __u8 bNumFrameDescriptors;
- __u8 guidFormat[16];
- __u8 bBitsPerPixel;
- __u8 bDefaultFrameIndex;
- __u8 bAspectRatioX;
- __u8 bAspectRatioY;
- __u8 bmInterfaceFlags;
- __u8 bCopyProtect;
-} __attribute__((__packed__));
-
-#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27
-
-/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */
-struct uvc_frame_uncompressed {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bFrameIndex;
- __u8 bmCapabilities;
- __u16 wWidth;
- __u16 wHeight;
- __u32 dwMinBitRate;
- __u32 dwMaxBitRate;
- __u32 dwMaxVideoFrameBufferSize;
- __u32 dwDefaultFrameInterval;
- __u8 bFrameIntervalType;
- __u32 dwFrameInterval[];
-} __attribute__((__packed__));
-
-#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n))
-
-#define UVC_FRAME_UNCOMPRESSED(n) \
- uvc_frame_uncompressed_##n
-
-#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \
-struct UVC_FRAME_UNCOMPRESSED(n) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u8 bFrameIndex; \
- __u8 bmCapabilities; \
- __u16 wWidth; \
- __u16 wHeight; \
- __u32 dwMinBitRate; \
- __u32 dwMaxBitRate; \
- __u32 dwMaxVideoFrameBufferSize; \
- __u32 dwDefaultFrameInterval; \
- __u8 bFrameIntervalType; \
- __u32 dwFrameInterval[n]; \
-} __attribute__ ((packed))
-
-/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */
-struct uvc_format_mjpeg {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bFormatIndex;
- __u8 bNumFrameDescriptors;
- __u8 bmFlags;
- __u8 bDefaultFrameIndex;
- __u8 bAspectRatioX;
- __u8 bAspectRatioY;
- __u8 bmInterfaceFlags;
- __u8 bCopyProtect;
-} __attribute__((__packed__));
-
-#define UVC_DT_FORMAT_MJPEG_SIZE 11
-
-/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */
-struct uvc_frame_mjpeg {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubType;
- __u8 bFrameIndex;
- __u8 bmCapabilities;
- __u16 wWidth;
- __u16 wHeight;
- __u32 dwMinBitRate;
- __u32 dwMaxBitRate;
- __u32 dwMaxVideoFrameBufferSize;
- __u32 dwDefaultFrameInterval;
- __u8 bFrameIntervalType;
- __u32 dwFrameInterval[];
-} __attribute__((__packed__));
-
-#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n))
-
-#define UVC_FRAME_MJPEG(n) \
- uvc_frame_mjpeg_##n
-
-#define DECLARE_UVC_FRAME_MJPEG(n) \
-struct UVC_FRAME_MJPEG(n) { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubType; \
- __u8 bFrameIndex; \
- __u8 bmCapabilities; \
- __u16 wWidth; \
- __u16 wHeight; \
- __u32 dwMinBitRate; \
- __u32 dwMaxBitRate; \
- __u32 dwMaxVideoFrameBufferSize; \
- __u32 dwDefaultFrameInterval; \
- __u8 bFrameIntervalType; \
- __u32 dwFrameInterval[n]; \
-} __attribute__ ((packed))
-
-#endif /* __LINUX_USB_VIDEO_H */
-
# UAPI Header export list
+header-y += hsi_char.h
--- /dev/null
+/*
+ * Part of the HSI character device driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Andras Domokos <andras.domokos at nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+
+#ifndef __HSI_CHAR_H
+#define __HSI_CHAR_H
+
+#define HSI_CHAR_MAGIC 'k'
+#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype)
+#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype)
+#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype)
+#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num)
+
+#define HSC_RESET HSC_IO(16)
+#define HSC_SET_PM HSC_IO(17)
+#define HSC_SEND_BREAK HSC_IO(18)
+#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config)
+#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config)
+#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config)
+#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config)
+
+#define HSC_PM_DISABLE 0
+#define HSC_PM_ENABLE 1
+
+#define HSC_MODE_STREAM 1
+#define HSC_MODE_FRAME 2
+#define HSC_FLOW_SYNC 0
+#define HSC_ARB_RR 0
+#define HSC_ARB_PRIO 1
+
+struct hsc_rx_config {
+ uint32_t mode;
+ uint32_t flow;
+ uint32_t channels;
+};
+
+struct hsc_tx_config {
+ uint32_t mode;
+ uint32_t channels;
+ uint32_t speed;
+ uint32_t arb_mode;
+};
+
+#endif /* __HSI_CHAR_H */
# UAPI Header export list
+header-y += audio.h
+header-y += cdc.h
+header-y += ch11.h
+header-y += ch9.h
+header-y += functionfs.h
+header-y += g_printer.h
+header-y += gadgetfs.h
+header-y += midi.h
+header-y += tmc.h
+header-y += video.h
--- /dev/null
+/*
+ * <linux/usb/audio.h> -- USB Audio definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/audio10.pdf
+ *
+ * Types and defines in this file are either specific to version 1.0 of
+ * this standard or common for newer versions.
+ */
+
+#ifndef _UAPI__LINUX_USB_AUDIO_H
+#define _UAPI__LINUX_USB_AUDIO_H
+
+#include <linux/types.h>
+
+/* bInterfaceProtocol values to denote the version of the standard used */
+#define UAC_VERSION_1 0x00
+#define UAC_VERSION_2 0x20
+
+/* A.2 Audio Interface Subclass Codes */
+#define USB_SUBCLASS_AUDIOCONTROL 0x01
+#define USB_SUBCLASS_AUDIOSTREAMING 0x02
+#define USB_SUBCLASS_MIDISTREAMING 0x03
+
+/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
+#define UAC_HEADER 0x01
+#define UAC_INPUT_TERMINAL 0x02
+#define UAC_OUTPUT_TERMINAL 0x03
+#define UAC_MIXER_UNIT 0x04
+#define UAC_SELECTOR_UNIT 0x05
+#define UAC_FEATURE_UNIT 0x06
+#define UAC1_PROCESSING_UNIT 0x07
+#define UAC1_EXTENSION_UNIT 0x08
+
+/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
+#define UAC_AS_GENERAL 0x01
+#define UAC_FORMAT_TYPE 0x02
+#define UAC_FORMAT_SPECIFIC 0x03
+
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED 0x00
+#define UAC_PROCESS_UP_DOWNMIX 0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
+#define UAC_PROCESS_STEREO_EXTENDER 0x03
+#define UAC_PROCESS_REVERB 0x04
+#define UAC_PROCESS_CHORUS 0x05
+#define UAC_PROCESS_DYN_RANGE_COMP 0x06
+
+/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_EP_GENERAL 0x01
+
+/* A.9 Audio Class-Specific Request Codes */
+#define UAC_SET_ 0x00
+#define UAC_GET_ 0x80
+
+#define UAC__CUR 0x1
+#define UAC__MIN 0x2
+#define UAC__MAX 0x3
+#define UAC__RES 0x4
+#define UAC__MEM 0x5
+
+#define UAC_SET_CUR (UAC_SET_ | UAC__CUR)
+#define UAC_GET_CUR (UAC_GET_ | UAC__CUR)
+#define UAC_SET_MIN (UAC_SET_ | UAC__MIN)
+#define UAC_GET_MIN (UAC_GET_ | UAC__MIN)
+#define UAC_SET_MAX (UAC_SET_ | UAC__MAX)
+#define UAC_GET_MAX (UAC_GET_ | UAC__MAX)
+#define UAC_SET_RES (UAC_SET_ | UAC__RES)
+#define UAC_GET_RES (UAC_GET_ | UAC__RES)
+#define UAC_SET_MEM (UAC_SET_ | UAC__MEM)
+#define UAC_GET_MEM (UAC_GET_ | UAC__MEM)
+
+#define UAC_GET_STAT 0xff
+
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT 0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE 0x01
+#define UAC_FU_VOLUME 0x02
+#define UAC_FU_BASS 0x03
+#define UAC_FU_MID 0x04
+#define UAC_FU_TREBLE 0x05
+#define UAC_FU_GRAPHIC_EQUALIZER 0x06
+#define UAC_FU_AUTOMATIC_GAIN 0x07
+#define UAC_FU_DELAY 0x08
+#define UAC_FU_BASS_BOOST 0x09
+#define UAC_FU_LOUDNESS 0x0a
+
+#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE 0x01
+#define UAC_UD_MODE_SELECT 0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE 0x01
+#define UAC_DP_MODE_SELECT 0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE 0x01
+#define UAC_3D_SPACE 0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE 0x01
+#define UAC_REVERB_LEVEL 0x02
+#define UAC_REVERB_TIME 0x03
+#define UAC_REVERB_FEEDBACK 0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE 0x01
+#define UAC_CHORUS_LEVEL 0x02
+#define UAC_CHORUS_RATE 0x03
+#define UAC_CHORUS_DEPTH 0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE 0x01
+#define UAC_DCR_RATE 0x02
+#define UAC_DCR_MAXAMPL 0x03
+#define UAC_DCR_THRESHOLD 0x04
+#define UAC_DCR_ATTACK_TIME 0x05
+#define UAC_DCR_RELEASE_TIME 0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE 0x01
+
+/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define UAC_MS_HEADER 0x01
+#define UAC_MIDI_IN_JACK 0x02
+#define UAC_MIDI_OUT_JACK 0x03
+
+/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_MS_GENERAL 0x01
+
+/* Terminals - 2.1 USB Terminal Types */
+#define UAC_TERMINAL_UNDEFINED 0x100
+#define UAC_TERMINAL_STREAMING 0x101
+#define UAC_TERMINAL_VENDOR_SPEC 0x1FF
+
+/* Terminal Control Selectors */
+/* 4.3.2 Class-Specific AC Interface Descriptor */
+struct uac1_ac_header_descriptor {
+ __u8 bLength; /* 8 + n */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
+ __le16 bcdADC; /* 0x0100 */
+ __le16 wTotalLength; /* includes Unit and Terminal desc. */
+ __u8 bInCollection; /* n */
+ __u8 baInterfaceNr[]; /* [n] */
+} __attribute__ ((packed));
+
+#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
+struct uac1_ac_header_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __le16 bcdADC; \
+ __le16 wTotalLength; \
+ __u8 bInCollection; \
+ __u8 baInterfaceNr[n]; \
+} __attribute__ ((packed))
+
+/* 4.3.2.1 Input Terminal Descriptor */
+struct uac_input_terminal_descriptor {
+ __u8 bLength; /* in bytes: 12 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Output Terminal associated */
+ __u8 bNrChannels; /* Number of logical output channels */
+ __le16 wChannelConfig;
+ __u8 iChannelNames;
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_INPUT_TERMINAL_SIZE 12
+
+/* Terminals - 2.2 Input Terminal Types */
+#define UAC_INPUT_TERMINAL_UNDEFINED 0x200
+#define UAC_INPUT_TERMINAL_MICROPHONE 0x201
+#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
+#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
+#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
+#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
+#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+
+/* Terminals - control selectors */
+
+#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01
+
+/* 4.3.2.2 Output Terminal Descriptor */
+struct uac1_output_terminal_descriptor {
+ __u8 bLength; /* in bytes: 9 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Input Terminal associated */
+ __u8 bSourceID; /* ID of the connected Unit or Terminal*/
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_OUTPUT_TERMINAL_SIZE 9
+
+/* Terminals - 2.3 Output Terminal Types */
+#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300
+#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301
+#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302
+#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
+#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
+#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
+#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
+#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
+
+/* Set bControlSize = 2 as default setting */
+#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \
+struct uac_feature_unit_descriptor_##ch { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bUnitID; \
+ __u8 bSourceID; \
+ __u8 bControlSize; \
+ __le16 bmaControls[ch + 1]; \
+ __u8 iFeature; \
+} __attribute__ ((packed))
+
+/* 4.3.2.3 Mixer Unit Descriptor */
+struct uac_mixer_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
+{
+ return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ if (protocol == UAC_VERSION_1)
+ return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ desc->baSourceID[desc->bNrInPins + 1];
+ else
+ return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+ (desc->baSourceID[desc->bNrInPins + 3] << 16) |
+ (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ (desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 3] :
+ desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ &desc->baSourceID[desc->bNrInPins + 4] :
+ &desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.4 Selector Unit Descriptor */
+struct uac_selector_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUintID;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.5 Feature Unit Descriptor */
+struct uac_feature_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u8 bControlSize;
+ __u8 bmaControls[0]; /* variable length */
+} __attribute__((packed));
+
+static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.6 Processing Unit Descriptors */
+struct uac_processing_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u16 wProcessType;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
+{
+ return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ if (protocol == UAC_VERSION_1)
+ return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ desc->baSourceID[desc->bNrInPins + 1];
+ else
+ return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+ (desc->baSourceID[desc->bNrInPins + 3] << 16) |
+ (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ (desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 3] :
+ desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 4] :
+ desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ &desc->baSourceID[desc->bNrInPins + 5] :
+ &desc->baSourceID[desc->bNrInPins + 7];
+}
+
+static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+ return desc->baSourceID[desc->bNrInPins + control_size];
+}
+
+static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+ return &desc->baSourceID[desc->bNrInPins + control_size + 1];
+}
+
+/* 4.5.2 Class-Specific AS Interface Descriptor */
+struct uac1_as_header_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* AS_GENERAL */
+ __u8 bTerminalLink; /* Terminal ID of connected Terminal */
+ __u8 bDelay; /* Delay introduced by the data path */
+ __le16 wFormatTag; /* The Audio Data Format */
+} __attribute__ ((packed));
+
+#define UAC_DT_AS_HEADER_SIZE 7
+
+/* Formats - A.1.1 Audio Data Format Type I Codes */
+#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I_PCM 0x1
+#define UAC_FORMAT_TYPE_I_PCM8 0x2
+#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3
+#define UAC_FORMAT_TYPE_I_ALAW 0x4
+#define UAC_FORMAT_TYPE_I_MULAW 0x5
+
+struct uac_format_type_i_continuous_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tLowerSamFreq[3];
+ __u8 tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
+
+struct uac_format_type_i_discrete_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \
+struct uac_format_type_i_discrete_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bFormatType; \
+ __u8 bNrChannels; \
+ __u8 bSubframeSize; \
+ __u8 bBitResolution; \
+ __u8 bSamFreqType; \
+ __u8 tSamFreq[n][3]; \
+} __attribute__ ((packed))
+
+#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
+
+struct uac_format_type_i_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u8 bSubslotSize;
+ __u8 bBitResolution;
+ __u8 bHeaderLength;
+ __u8 bControlSize;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* Formats - Audio Data Format Type I Codes */
+
+#define UAC_FORMAT_TYPE_II_MPEG 0x1001
+#define UAC_FORMAT_TYPE_II_AC3 0x1002
+
+struct uac_format_type_ii_discrete_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __le16 wMaxBitRate;
+ __le16 wSamplesPerFrame;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__((packed));
+
+struct uac_format_type_ii_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u16 wMaxBitRate;
+ __u16 wSamplesPerFrame;
+ __u8 bHeaderLength;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* type III */
+#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006
+
+/* Formats - A.2 Format Type Codes */
+#define UAC_FORMAT_TYPE_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I 0x1
+#define UAC_FORMAT_TYPE_II 0x2
+#define UAC_FORMAT_TYPE_III 0x3
+#define UAC_EXT_FORMAT_TYPE_I 0x81
+#define UAC_EXT_FORMAT_TYPE_II 0x82
+#define UAC_EXT_FORMAT_TYPE_III 0x83
+
+struct uac_iso_endpoint_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* EP_GENERAL */
+ __u8 bmAttributes;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+#define UAC_ISO_ENDPOINT_DESC_SIZE 7
+
+#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01
+#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
+#define UAC_EP_CS_ATTR_FILL_MAX 0x80
+
+/* status word format (3.7.1.1) */
+
+#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2
+
+#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7)
+#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6)
+
+struct uac1_status_word {
+ __u8 bStatusType;
+ __u8 bOriginator;
+} __attribute__((packed));
+
+
+#endif /* _UAPI__LINUX_USB_AUDIO_H */
--- /dev/null
+/*
+ * USB Communications Device Class (CDC) definitions
+ *
+ * CDC says how to talk to lots of different types of network adapters,
+ * notably ethernet adapters and various modems. It's used mostly with
+ * firmware based USB peripherals.
+ */
+
+#ifndef __LINUX_USB_CDC_H
+#define __LINUX_USB_CDC_H
+
+#include <linux/types.h>
+
+#define USB_CDC_SUBCLASS_ACM 0x02
+#define USB_CDC_SUBCLASS_ETHERNET 0x06
+#define USB_CDC_SUBCLASS_WHCM 0x08
+#define USB_CDC_SUBCLASS_DMM 0x09
+#define USB_CDC_SUBCLASS_MDLM 0x0a
+#define USB_CDC_SUBCLASS_OBEX 0x0b
+#define USB_CDC_SUBCLASS_EEM 0x0c
+#define USB_CDC_SUBCLASS_NCM 0x0d
+
+#define USB_CDC_PROTO_NONE 0
+
+#define USB_CDC_ACM_PROTO_AT_V25TER 1
+#define USB_CDC_ACM_PROTO_AT_PCCA101 2
+#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3
+#define USB_CDC_ACM_PROTO_AT_GSM 4
+#define USB_CDC_ACM_PROTO_AT_3G 5
+#define USB_CDC_ACM_PROTO_AT_CDMA 6
+#define USB_CDC_ACM_PROTO_VENDOR 0xff
+
+#define USB_CDC_PROTO_EEM 7
+
+#define USB_CDC_NCM_PROTO_NTB 1
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific descriptors ... there are a couple dozen of them
+ */
+
+#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */
+#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */
+#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */
+#define USB_CDC_UNION_TYPE 0x06 /* union_desc */
+#define USB_CDC_COUNTRY_TYPE 0x07
+#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */
+#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */
+#define USB_CDC_WHCM_TYPE 0x11
+#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */
+#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */
+#define USB_CDC_DMM_TYPE 0x14
+#define USB_CDC_OBEX_TYPE 0x15
+#define USB_CDC_NCM_TYPE 0x1a
+
+/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */
+struct usb_cdc_header_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdCDC;
+} __attribute__ ((packed));
+
+/* "Call Management Descriptor" from CDC spec 5.2.3.2 */
+struct usb_cdc_call_mgmt_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bmCapabilities;
+#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01
+#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02
+
+ __u8 bDataInterface;
+} __attribute__ ((packed));
+
+/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */
+struct usb_cdc_acm_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bmCapabilities;
+} __attribute__ ((packed));
+
+/* capabilities from 5.2.3.3 */
+
+#define USB_CDC_COMM_FEATURE 0x01
+#define USB_CDC_CAP_LINE 0x02
+#define USB_CDC_CAP_BRK 0x04
+#define USB_CDC_CAP_NOTIFY 0x08
+
+/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
+struct usb_cdc_union_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bMasterInterface0;
+ __u8 bSlaveInterface0;
+ /* ... and there could be other slave interfaces */
+} __attribute__ ((packed));
+
+/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */
+struct usb_cdc_country_functional_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 iCountryCodeRelDate;
+ __le16 wCountyCode0;
+ /* ... and there can be a lot of country codes */
+} __attribute__ ((packed));
+
+/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */
+struct usb_cdc_network_terminal_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bEntityId;
+ __u8 iName;
+ __u8 bChannelIndex;
+ __u8 bPhysicalInterface;
+} __attribute__ ((packed));
+
+/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
+struct usb_cdc_ether_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 iMACAddress;
+ __le32 bmEthernetStatistics;
+ __le16 wMaxSegmentSize;
+ __le16 wNumberMCFilters;
+ __u8 bNumberPowerFilters;
+} __attribute__ ((packed));
+
+/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
+struct usb_cdc_dmm_desc {
+ __u8 bFunctionLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u16 bcdVersion;
+ __le16 wMaxCommand;
+} __attribute__ ((packed));
+
+/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
+struct usb_cdc_mdlm_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdVersion;
+ __u8 bGUID[16];
+} __attribute__ ((packed));
+
+/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */
+struct usb_cdc_mdlm_detail_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ /* type is associated with mdlm_desc.bGUID */
+ __u8 bGuidDescriptorType;
+ __u8 bDetailData[0];
+} __attribute__ ((packed));
+
+/* "OBEX Control Model Functional Descriptor" */
+struct usb_cdc_obex_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdVersion;
+} __attribute__ ((packed));
+
+/* "NCM Control Model Functional Descriptor" */
+struct usb_cdc_ncm_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdNcmVersion;
+ __u8 bmNetworkCapabilities;
+} __attribute__ ((packed));
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Control Requests (6.2)
+ *
+ * section 3.6.2.1 table 4 has the ACM profile, for modems.
+ * section 3.8.2 table 10 has the ethernet profile.
+ *
+ * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant,
+ * heavily dependent on the encapsulated (proprietary) command mechanism.
+ */
+
+#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define USB_CDC_REQ_SET_LINE_CODING 0x20
+#define USB_CDC_REQ_GET_LINE_CODING 0x21
+#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22
+#define USB_CDC_REQ_SEND_BREAK 0x23
+#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40
+#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41
+#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42
+#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43
+#define USB_CDC_GET_ETHERNET_STATISTIC 0x44
+#define USB_CDC_GET_NTB_PARAMETERS 0x80
+#define USB_CDC_GET_NET_ADDRESS 0x81
+#define USB_CDC_SET_NET_ADDRESS 0x82
+#define USB_CDC_GET_NTB_FORMAT 0x83
+#define USB_CDC_SET_NTB_FORMAT 0x84
+#define USB_CDC_GET_NTB_INPUT_SIZE 0x85
+#define USB_CDC_SET_NTB_INPUT_SIZE 0x86
+#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87
+#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88
+#define USB_CDC_GET_CRC_MODE 0x89
+#define USB_CDC_SET_CRC_MODE 0x8a
+
+/* Line Coding Structure from CDC spec 6.2.13 */
+struct usb_cdc_line_coding {
+ __le32 dwDTERate;
+ __u8 bCharFormat;
+#define USB_CDC_1_STOP_BITS 0
+#define USB_CDC_1_5_STOP_BITS 1
+#define USB_CDC_2_STOP_BITS 2
+
+ __u8 bParityType;
+#define USB_CDC_NO_PARITY 0
+#define USB_CDC_ODD_PARITY 1
+#define USB_CDC_EVEN_PARITY 2
+#define USB_CDC_MARK_PARITY 3
+#define USB_CDC_SPACE_PARITY 4
+
+ __u8 bDataBits;
+} __attribute__ ((packed));
+
+/* table 62; bits in multicast filter */
+#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0)
+#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */
+#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2)
+#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3)
+#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Notifications (6.3) sent by interrupt transfers
+ *
+ * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
+ * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
+ * RNDIS also defines its own bit-incompatible notifications
+ */
+
+#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00
+#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01
+#define USB_CDC_NOTIFY_SERIAL_STATE 0x20
+#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a
+
+struct usb_cdc_notification {
+ __u8 bmRequestType;
+ __u8 bNotificationType;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+struct usb_cdc_speed_change {
+ __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */
+ __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class Specific structures and constants
+ *
+ * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1
+ *
+ */
+
+struct usb_cdc_ncm_ntb_parameters {
+ __le16 wLength;
+ __le16 bmNtbFormatsSupported;
+ __le32 dwNtbInMaxSize;
+ __le16 wNdpInDivisor;
+ __le16 wNdpInPayloadRemainder;
+ __le16 wNdpInAlignment;
+ __le16 wPadding1;
+ __le32 dwNtbOutMaxSize;
+ __le16 wNdpOutDivisor;
+ __le16 wNdpOutPayloadRemainder;
+ __le16 wNdpOutAlignment;
+ __le16 wNtbOutMaxDatagrams;
+} __attribute__ ((packed));
+
+/*
+ * CDC NCM transfer headers, CDC NCM subclass 3.2
+ */
+
+#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */
+#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */
+
+struct usb_cdc_ncm_nth16 {
+ __le32 dwSignature;
+ __le16 wHeaderLength;
+ __le16 wSequence;
+ __le16 wBlockLength;
+ __le16 wNdpIndex;
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_nth32 {
+ __le32 dwSignature;
+ __le16 wHeaderLength;
+ __le16 wSequence;
+ __le32 dwBlockLength;
+ __le32 dwNdpIndex;
+} __attribute__ ((packed));
+
+/*
+ * CDC NCM datagram pointers, CDC NCM subclass 3.3
+ */
+
+#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */
+#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */
+#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */
+#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */
+
+/* 16-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe16 {
+ __le16 wDatagramIndex;
+ __le16 wDatagramLength;
+} __attribute__((__packed__));
+
+/* 16-bit NCM Datagram Pointer Table */
+struct usb_cdc_ncm_ndp16 {
+ __le32 dwSignature;
+ __le16 wLength;
+ __le16 wNextNdpIndex;
+ struct usb_cdc_ncm_dpe16 dpe16[0];
+} __attribute__ ((packed));
+
+/* 32-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe32 {
+ __le32 dwDatagramIndex;
+ __le32 dwDatagramLength;
+} __attribute__((__packed__));
+
+/* 32-bit NCM Datagram Pointer Table */
+struct usb_cdc_ncm_ndp32 {
+ __le32 dwSignature;
+ __le16 wLength;
+ __le16 wReserved6;
+ __le32 dwNextNdpIndex;
+ __le32 dwReserved12;
+ struct usb_cdc_ncm_dpe32 dpe32[0];
+} __attribute__ ((packed));
+
+/* CDC NCM subclass 3.2.1 and 3.2.2 */
+#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C
+#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010
+
+/* CDC NCM subclass 3.3.3 Datagram Formatting */
+#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30
+#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31
+
+/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */
+#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00
+#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE
+
+/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */
+#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0)
+#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1)
+#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2)
+#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3)
+#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4)
+#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0)
+#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04
+#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C
+
+/* CDC NCM subclass 6.2.5 SetNtbFormat */
+#define USB_CDC_NCM_NTB16_FORMAT 0x00
+#define USB_CDC_NCM_NTB32_FORMAT 0x01
+
+/* CDC NCM subclass 6.2.7 SetNtbInputSize */
+#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048
+#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048
+
+/* NTB Input Size Structure */
+struct usb_cdc_ncm_ndp_input_size {
+ __le32 dwNtbInMaxSize;
+ __le16 wNtbInMaxDatagrams;
+ __le16 wReserved;
+} __attribute__ ((packed));
+
+/* CDC NCM subclass 6.2.11 SetCrcMode */
+#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00
+#define USB_CDC_NCM_CRC_APPENDED 0x01
+
+#endif /* __LINUX_USB_CDC_H */
--- /dev/null
+/*
+ * This file holds Hub protocol constants and data structures that are
+ * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
+ *
+ * It is used/shared between the USB core, the HCDs and couple of other USB
+ * drivers.
+ */
+
+#ifndef __LINUX_CH11_H
+#define __LINUX_CH11_H
+
+#include <linux/types.h> /* __u8 etc */
+
+/*
+ * Hub request types
+ */
+
+#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
+#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
+
+/*
+ * Hub class requests
+ * See USB 2.0 spec Table 11-16
+ */
+#define HUB_CLEAR_TT_BUFFER 8
+#define HUB_RESET_TT 9
+#define HUB_GET_TT_STATE 10
+#define HUB_STOP_TT 11
+
+/*
+ * Hub class additional requests defined by USB 3.0 spec
+ * See USB 3.0 spec Table 10-6
+ */
+#define HUB_SET_DEPTH 12
+#define HUB_GET_PORT_ERR_COUNT 13
+
+/*
+ * Hub Class feature numbers
+ * See USB 2.0 spec Table 11-17
+ */
+#define C_HUB_LOCAL_POWER 0
+#define C_HUB_OVER_CURRENT 1
+
+/*
+ * Port feature numbers
+ * See USB 2.0 spec Table 11-17
+ */
+#define USB_PORT_FEAT_CONNECTION 0
+#define USB_PORT_FEAT_ENABLE 1
+#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */
+#define USB_PORT_FEAT_OVER_CURRENT 3
+#define USB_PORT_FEAT_RESET 4
+#define USB_PORT_FEAT_L1 5 /* L1 suspend */
+#define USB_PORT_FEAT_POWER 8
+#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */
+#define USB_PORT_FEAT_C_CONNECTION 16
+#define USB_PORT_FEAT_C_ENABLE 17
+#define USB_PORT_FEAT_C_SUSPEND 18
+#define USB_PORT_FEAT_C_OVER_CURRENT 19
+#define USB_PORT_FEAT_C_RESET 20
+#define USB_PORT_FEAT_TEST 21
+#define USB_PORT_FEAT_INDICATOR 22
+#define USB_PORT_FEAT_C_PORT_L1 23
+
+/*
+ * Port feature selectors added by USB 3.0 spec.
+ * See USB 3.0 spec Table 10-7
+ */
+#define USB_PORT_FEAT_LINK_STATE 5
+#define USB_PORT_FEAT_U1_TIMEOUT 23
+#define USB_PORT_FEAT_U2_TIMEOUT 24
+#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
+#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
+#define USB_PORT_FEAT_BH_PORT_RESET 28
+#define USB_PORT_FEAT_C_BH_PORT_RESET 29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
+
+#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8)
+
+/* USB 3.0 hub remote wake mask bits, see table 10-14 */
+#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
+#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
+#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10)
+
+/*
+ * Hub Status and Hub Change results
+ * See USB 2.0 spec Table 11-19 and Table 11-20
+ */
+struct usb_port_status {
+ __le16 wPortStatus;
+ __le16 wPortChange;
+} __attribute__ ((packed));
+
+/*
+ * wPortStatus bit field
+ * See USB 2.0 spec Table 11-21
+ */
+#define USB_PORT_STAT_CONNECTION 0x0001
+#define USB_PORT_STAT_ENABLE 0x0002
+#define USB_PORT_STAT_SUSPEND 0x0004
+#define USB_PORT_STAT_OVERCURRENT 0x0008
+#define USB_PORT_STAT_RESET 0x0010
+#define USB_PORT_STAT_L1 0x0020
+/* bits 6 to 7 are reserved */
+#define USB_PORT_STAT_POWER 0x0100
+#define USB_PORT_STAT_LOW_SPEED 0x0200
+#define USB_PORT_STAT_HIGH_SPEED 0x0400
+#define USB_PORT_STAT_TEST 0x0800
+#define USB_PORT_STAT_INDICATOR 0x1000
+/* bits 13 to 15 are reserved */
+
+/*
+ * Additions to wPortStatus bit field from USB 3.0
+ * See USB 3.0 spec Table 10-10
+ */
+#define USB_PORT_STAT_LINK_STATE 0x01e0
+#define USB_SS_PORT_STAT_POWER 0x0200
+#define USB_SS_PORT_STAT_SPEED 0x1c00
+#define USB_PORT_STAT_SPEED_5GBPS 0x0000
+/* Valid only if port is enabled */
+/* Bits that are the same from USB 2.0 */
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
+ USB_PORT_STAT_ENABLE | \
+ USB_PORT_STAT_OVERCURRENT | \
+ USB_PORT_STAT_RESET)
+
+/*
+ * Definitions for PORT_LINK_STATE values
+ * (bits 5-8) in wPortStatus
+ */
+#define USB_SS_PORT_LS_U0 0x0000
+#define USB_SS_PORT_LS_U1 0x0020
+#define USB_SS_PORT_LS_U2 0x0040
+#define USB_SS_PORT_LS_U3 0x0060
+#define USB_SS_PORT_LS_SS_DISABLED 0x0080
+#define USB_SS_PORT_LS_RX_DETECT 0x00a0
+#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0
+#define USB_SS_PORT_LS_POLLING 0x00e0
+#define USB_SS_PORT_LS_RECOVERY 0x0100
+#define USB_SS_PORT_LS_HOT_RESET 0x0120
+#define USB_SS_PORT_LS_COMP_MOD 0x0140
+#define USB_SS_PORT_LS_LOOPBACK 0x0160
+
+/*
+ * wPortChange bit field
+ * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
+ * Bits 0 to 5 shown, bits 6 to 15 are reserved
+ */
+#define USB_PORT_STAT_C_CONNECTION 0x0001
+#define USB_PORT_STAT_C_ENABLE 0x0002
+#define USB_PORT_STAT_C_SUSPEND 0x0004
+#define USB_PORT_STAT_C_OVERCURRENT 0x0008
+#define USB_PORT_STAT_C_RESET 0x0010
+#define USB_PORT_STAT_C_L1 0x0020
+/*
+ * USB 3.0 wPortChange bit fields
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_PORT_STAT_C_BH_RESET 0x0020
+#define USB_PORT_STAT_C_LINK_STATE 0x0040
+#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080
+
+/*
+ * wHubCharacteristics (masks)
+ * See USB 2.0 spec Table 11-13, offset 3
+ */
+#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */
+#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */
+#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
+#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */
+
+#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */
+
+#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */
+#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
+#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
+#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */
+
+#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
+#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */
+
+struct usb_hub_status {
+ __le16 wHubStatus;
+ __le16 wHubChange;
+} __attribute__ ((packed));
+
+/*
+ * Hub Status & Hub Change bit masks
+ * See USB 2.0 spec Table 11-19 and Table 11-20
+ * Bits 0 and 1 for wHubStatus and wHubChange
+ * Bits 2 to 15 are reserved for both
+ */
+#define HUB_STATUS_LOCAL_POWER 0x0001
+#define HUB_STATUS_OVERCURRENT 0x0002
+#define HUB_CHANGE_LOCAL_POWER 0x0001
+#define HUB_CHANGE_OVERCURRENT 0x0002
+
+
+/*
+ * Hub descriptor
+ * See USB 2.0 spec Table 11-13
+ */
+
+#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
+#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a)
+#define USB_DT_HUB_NONVAR_SIZE 7
+#define USB_DT_SS_HUB_SIZE 12
+
+/*
+ * Hub Device descriptor
+ * USB Hub class device protocols
+ */
+
+#define USB_HUB_PR_FS 0 /* Full speed hub */
+#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
+#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
+#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
+#define USB_HUB_PR_SS 3 /* Super speed hub */
+
+struct usb_hub_descriptor {
+ __u8 bDescLength;
+ __u8 bDescriptorType;
+ __u8 bNbrPorts;
+ __le16 wHubCharacteristics;
+ __u8 bPwrOn2PwrGood;
+ __u8 bHubContrCurrent;
+
+ /* 2.0 and 3.0 hubs differ here */
+ union {
+ struct {
+ /* add 1 bit for hub status change; round to bytes */
+ __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+ __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+ } __attribute__ ((packed)) hs;
+
+ struct {
+ __u8 bHubHdrDecLat;
+ __le16 wHubDelay;
+ __le16 DeviceRemovable;
+ } __attribute__ ((packed)) ss;
+ } u;
+} __attribute__ ((packed));
+
+/* port indicator status selectors, tables 11-7 and 11-25 */
+#define HUB_LED_AUTO 0
+#define HUB_LED_AMBER 1
+#define HUB_LED_GREEN 2
+#define HUB_LED_OFF 3
+
+enum hub_led_mode {
+ INDICATOR_AUTO = 0,
+ INDICATOR_CYCLE,
+ /* software blinks for attention: software, hardware, reserved */
+ INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
+ INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
+ INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
+} __attribute__ ((packed));
+
+/* Transaction Translator Think Times, in bits */
+#define HUB_TTTT_8_BITS 0x00
+#define HUB_TTTT_16_BITS 0x20
+#define HUB_TTTT_24_BITS 0x40
+#define HUB_TTTT_32_BITS 0x60
+
+#endif /* __LINUX_CH11_H */
--- /dev/null
+/*
+ * This file holds USB constants and structures that are needed for
+ * USB device APIs. These are used by the USB device model, which is
+ * defined in chapter 9 of the USB 2.0 specification and in the
+ * Wireless USB 1.0 (spread around). Linux has several APIs in C that
+ * need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device. That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ *
+ * Note all descriptors are declared '__attribute__((packed))' so that:
+ *
+ * [a] they never get padded, either internally (USB spec writers
+ * probably handled that) or externally;
+ *
+ * [b] so that accessing bigger-than-a-bytes fields will never
+ * generate bus errors on any platform, even when the location of
+ * its descriptor inside a bundle isn't "naturally aligned", and
+ *
+ * [c] for consistency, removing all doubt even when it appears to
+ * someone that the two other points are non-issues for that
+ * particular descriptor type.
+ */
+
+#ifndef _UAPI__LINUX_USB_CH9_H
+#define _UAPI__LINUX_USB_CH9_H
+
+#include <linux/types.h> /* __u8 etc */
+#include <asm/byteorder.h> /* le16_to_cpu */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT 0 /* to device */
+#define USB_DIR_IN 0x80 /* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK (0x03 << 5)
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK 0x1f
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_SEL 0x30
+#define USB_REQ_SET_ISOCH_DELAY 0x31
+
+#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
+ * are at most sixteen features of each type.) Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
+ */
+#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
+#define USB_DEVICE_BATTERY 2 /* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define TEST_J 1
+#define TEST_K 2
+#define TEST_SE0_NAK 3
+#define TEST_PACKET 4
+#define TEST_FORCE_EN 5
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+
+#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device. It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+ __u8 bRequestType;
+ __u8 bRequest;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire". Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_DEVICE_QUALIFIER 0x06
+#define USB_DT_OTHER_SPEED_CONFIG 0x07
+#define USB_DT_INTERFACE_POWER 0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG 0x09
+#define USB_DT_DEBUG 0x0a
+#define USB_DT_INTERFACE_ASSOCIATION 0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY 0x0c
+#define USB_DT_KEY 0x0d
+#define USB_DT_ENCRYPTION_TYPE 0x0e
+#define USB_DT_BOS 0x0f
+#define USB_DT_DEVICE_CAPABILITY 0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
+#define USB_DT_WIRE_ADAPTER 0x21
+#define USB_DT_RPIPE 0x22
+#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE 0x24
+/* From the USB 3.0 spec */
+#define USB_DT_SS_ENDPOINT_COMP 0x30
+
+/* Conventional codes for class-specific descriptors. The convention is
+ * defined in the USB "Common Class" Spec (3.11). Individual class specs
+ * are authoritative for their usage, not the "common class" writeup.
+ */
+#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
+#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
+#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
+#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
+#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ __u8 iManufacturer;
+ __u8 iProduct;
+ __u8 iSerialNumber;
+ __u8 bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE 18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
+#define USB_CLASS_AUDIO 1
+#define USB_CLASS_COMM 2
+#define USB_CLASS_HID 3
+#define USB_CLASS_PHYSICAL 5
+#define USB_CLASS_STILL_IMAGE 6
+#define USB_CLASS_PRINTER 7
+#define USB_CLASS_MASS_STORAGE 8
+#define USB_CLASS_HUB 9
+#define USB_CLASS_CDC_DATA 0x0a
+#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
+#define USB_CLASS_VIDEO 0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
+#define USB_CLASS_MISC 0xef
+#define USB_CLASS_APP_SPEC 0xfe
+#define USB_CLASS_VENDOR_SPEC 0xff
+
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different. Highspeed-capable devices can look
+ * different depending on what speed they're currently running. Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumInterfaces;
+ __u8 bConfigurationValue;
+ __u8 iConfiguration;
+ __u8 bmAttributes;
+ __u8 bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE 9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
+#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
+#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
+#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wData[1]; /* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ __u8 bNumEndpoints;
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+ __u8 iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE 9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+
+ /* NOTE: these two are _only_ in audio endpoints. */
+ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+ __u8 bRefresh;
+ __u8 bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE 7
+#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK 0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL 0
+#define USB_ENDPOINT_XFER_ISOC 1
+#define USB_ENDPOINT_XFER_BULK 2
+#define USB_ENDPOINT_XFER_INT 3
+#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE 0x30
+#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+static inline int usb_endpoint_interrupt_type(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bmAttributes;
+ __le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE 6
+
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __u8 bNumConfigurations;
+ __u8 bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bmAttributes; /* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP (1 << 0)
+#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ /* bulk endpoints with 8 byte maxpacket */
+ __u8 bDebugInEndpoint;
+ __u8 bDebugOutEndpoint;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bFirstInterface;
+ __u8 bInterfaceCount;
+ __u8 bFunctionClass;
+ __u8 bFunctionSubClass;
+ __u8 bFunctionProtocol;
+ __u8 iFunction;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY: group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumEncryptionTypes;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 bKeyData[0];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEncryptionType;
+#define USB_ENC_TYPE_UNSECURE 0
+#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
+#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
+#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
+ __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
+ __u8 bAuthKeyIndex;
+} __attribute__((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS: group of device-level capabilities */
+struct usb_bos_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumDeviceCaps;
+} __attribute__((packed));
+
+#define USB_DT_BOS_SIZE 5
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
+struct usb_dev_cap_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+} __attribute__((packed));
+
+#define USB_CAP_TYPE_WIRELESS_USB 1
+
+struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+
+ __u8 bmAttributes;
+#define USB_WIRELESS_P2P_DRD (1 << 1)
+#define USB_WIRELESS_BEACON_MASK (3 << 2)
+#define USB_WIRELESS_BEACON_SELF (1 << 2)
+#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
+#define USB_WIRELESS_BEACON_NONE (3 << 2)
+ __le16 wPHYRates; /* bit rates, Mbps */
+#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
+#define USB_WIRELESS_PHY_80 (1 << 1)
+#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
+#define USB_WIRELESS_PHY_160 (1 << 3)
+#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
+#define USB_WIRELESS_PHY_320 (1 << 5)
+#define USB_WIRELESS_PHY_400 (1 << 6)
+#define USB_WIRELESS_PHY_480 (1 << 7)
+ __u8 bmTFITXPowerInfo; /* TFI power levels */
+ __u8 bmFFITXPowerInfo; /* FFI power levels */
+ __le16 bmBandGroup;
+ __u8 bReserved;
+} __attribute__((packed));
+
+/* USB 2.0 Extension descriptor */
+#define USB_CAP_TYPE_EXT 2
+
+struct usb_ext_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __le32 bmAttributes;
+#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
+#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bMaxSequence;
+ __le16 wMaxStreamDelay;
+ __le16 wOverTheAirPacketSize;
+ __u8 bOverTheAirInterval;
+ __u8 bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO 0
+#define USB_ENDPOINT_SWITCH_SWITCH 1
+#define USB_ENDPOINT_SWITCH_SCALE 2
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys. The handshake depends on a CC.
+ */
+struct usb_handshake {
+ __u8 bMessageNumber;
+ __u8 bStatus;
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 CDID[16];
+ __u8 nonce[16];
+ __u8 MIC[8];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+ __u8 CHID[16]; /* persistent host id */
+ __u8 CDID[16]; /* device id (unique w/in host context) */
+ __u8 CK[16]; /* connection key */
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+ USB_SPEED_UNKNOWN = 0, /* enumerating */
+ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
+ USB_SPEED_HIGH, /* usb 2.0 */
+ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
+ USB_SPEED_SUPER, /* usb 3.0 */
+};
+
+
+enum usb_device_state {
+ /* NOTATTACHED isn't in the USB spec, and this state acts
+ * the same as ATTACHED ... but it's clearer this way.
+ */
+ USB_STATE_NOTATTACHED = 0,
+
+ /* chapter 9 and authentication (wireless) device states */
+ USB_STATE_ATTACHED,
+ USB_STATE_POWERED, /* wired */
+ USB_STATE_RECONNECTING, /* auth */
+ USB_STATE_UNAUTHENTICATED, /* auth */
+ USB_STATE_DEFAULT, /* limited function */
+ USB_STATE_ADDRESS,
+ USB_STATE_CONFIGURED, /* most functions */
+
+ USB_STATE_SUSPENDED
+
+ /* NOTE: there are actually four different SUSPENDED
+ * states, returning to POWERED, DEFAULT, ADDRESS, or
+ * CONFIGURED respectively when SOF tokens flow again.
+ * At this level there's no difference between L1 and L2
+ * suspend states. (L2 being original USB 1.1 suspend.)
+ */
+};
+
+enum usb3_link_state {
+ USB3_LPM_U0 = 0,
+ USB3_LPM_U1,
+ USB3_LPM_U2,
+ USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED 0x0
+#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
+#define USB3_LPM_DEVICE_INITIATED 0xFF
+
+struct usb_set_sel_req {
+ __u8 u1_sel;
+ __u8 u1_pel;
+ __le16 u2_sel;
+ __le16 u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
+#endif /* _UAPI__LINUX_USB_CH9_H */
--- /dev/null
+#ifndef _UAPI__LINUX_FUNCTIONFS_H__
+#define _UAPI__LINUX_FUNCTIONFS_H__
+
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+
+enum {
+ FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
+ FUNCTIONFS_STRINGS_MAGIC = 2
+};
+
+
+#ifndef __KERNEL__
+
+/* Descriptor of an non-audio endpoint */
+struct usb_endpoint_descriptor_no_audio {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+} __attribute__((packed));
+
+
+/*
+ * All numbers must be in little endian order.
+ */
+
+struct usb_functionfs_descs_head {
+ __le32 magic;
+ __le32 length;
+ __le32 fs_count;
+ __le32 hs_count;
+} __attribute__((packed));
+
+/*
+ * Descriptors format:
+ *
+ * | off | name | type | description |
+ * |-----+-----------+--------------+--------------------------------------|
+ * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
+ * | 4 | length | LE32 | length of the whole data chunk |
+ * | 8 | fs_count | LE32 | number of full-speed descriptors |
+ * | 12 | hs_count | LE32 | number of high-speed descriptors |
+ * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors |
+ * | | hs_descrs | Descriptor[] | list of high-speed descriptors |
+ *
+ * descs are just valid USB descriptors and have the following format:
+ *
+ * | off | name | type | description |
+ * |-----+-----------------+------+--------------------------|
+ * | 0 | bLength | U8 | length of the descriptor |
+ * | 1 | bDescriptorType | U8 | descriptor type |
+ * | 2 | payload | | descriptor's payload |
+ */
+
+struct usb_functionfs_strings_head {
+ __le32 magic;
+ __le32 length;
+ __le32 str_count;
+ __le32 lang_count;
+} __attribute__((packed));
+
+/*
+ * Strings format:
+ *
+ * | off | name | type | description |
+ * |-----+------------+-----------------------+----------------------------|
+ * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC |
+ * | 4 | length | LE32 | length of the data chunk |
+ * | 8 | str_count | LE32 | number of strings |
+ * | 12 | lang_count | LE32 | number of languages |
+ * | 16 | stringtab | StringTab[lang_count] | table of strings per lang |
+ *
+ * For each language there is one stringtab entry (ie. there are lang_count
+ * stringtab entires). Each StringTab has following format:
+ *
+ * | off | name | type | description |
+ * |-----+---------+-------------------+------------------------------------|
+ * | 0 | lang | LE16 | language code |
+ * | 2 | strings | String[str_count] | array of strings in given language |
+ *
+ * For each string there is one strings entry (ie. there are str_count
+ * string entries). Each String is a NUL terminated string encoded in
+ * UTF-8.
+ */
+
+#endif
+
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors. Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_functionfs_event_type {
+ FUNCTIONFS_BIND,
+ FUNCTIONFS_UNBIND,
+
+ FUNCTIONFS_ENABLE,
+ FUNCTIONFS_DISABLE,
+
+ FUNCTIONFS_SETUP,
+
+ FUNCTIONFS_SUSPEND,
+ FUNCTIONFS_RESUME
+};
+
+/* NOTE: this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_functionfs_event {
+ union {
+ /* SETUP: packet; DATA phase i/o precedes next event
+ *(setup.bmRequestType & USB_DIR_IN) flags direction */
+ struct usb_ctrlrequest setup;
+ } __attribute__((packed)) u;
+
+ /* enum usb_functionfs_event_type */
+ __u8 type;
+ __u8 _pad[3];
+} __attribute__((packed));
+
+
+/* Endpoint ioctls */
+/* The same as in gadgetfs */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define FUNCTIONFS_FIFO_STATUS _IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define FUNCTIONFS_CLEAR_HALT _IO('g', 3)
+
+/* Specific for functionfs */
+
+/*
+ * Returns reverse mapping of an interface. Called on EP0. If there
+ * is no such interface returns -EDOM. If function is not active
+ * returns -ENODEV.
+ */
+#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128)
+
+/*
+ * Returns real bEndpointAddress of an endpoint. If function is not
+ * active returns -ENODEV.
+ */
+#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129)
+
+
+
+#endif /* _UAPI__LINUX_FUNCTIONFS_H__ */
--- /dev/null
+/*
+ * g_printer.h -- Header file for USB Printer gadget driver
+ *
+ * Copyright (C) 2007 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_G_PRINTER_H
+#define __LINUX_USB_G_PRINTER_H
+
+#define PRINTER_NOT_ERROR 0x08
+#define PRINTER_SELECTED 0x10
+#define PRINTER_PAPER_EMPTY 0x20
+
+/* The 'g' code is also used by gadgetfs ioctl requests.
+ * Don't add any colliding codes to either driver, and keep
+ * them in unique ranges (size 0x20 for now).
+ */
+#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char)
+#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char)
+
+#endif /* __LINUX_USB_G_PRINTER_H */
--- /dev/null
+/*
+ * Filesystem based user-mode API to USB Gadget controller hardware
+ *
+ * Other than ep0 operations, most things are done by read() and write()
+ * on endpoint files found in one directory. They are configured by
+ * writing descriptors, and then may be used for normal stream style
+ * i/o requests. When ep0 is configured, the device can enumerate;
+ * when it's closed, the device disconnects from usb. Operations on
+ * ep0 require ioctl() operations.
+ *
+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+ * which may then be used to read usb_gadgetfs_event structs. The driver
+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+ * then performing data transfers by reading or writing.
+ */
+
+#ifndef __LINUX_USB_GADGETFS_H
+#define __LINUX_USB_GADGETFS_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors. Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_gadgetfs_event_type {
+ GADGETFS_NOP = 0,
+
+ GADGETFS_CONNECT,
+ GADGETFS_DISCONNECT,
+ GADGETFS_SETUP,
+ GADGETFS_SUSPEND,
+ /* and likely more ! */
+};
+
+/* NOTE: this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_gadgetfs_event {
+ union {
+ /* NOP, DISCONNECT, SUSPEND: nothing
+ * ... some hardware can't report disconnection
+ */
+
+ /* CONNECT: just the speed */
+ enum usb_device_speed speed;
+
+ /* SETUP: packet; DATA phase i/o precedes next event
+ *(setup.bmRequestType & USB_DIR_IN) flags direction
+ * ... includes SET_CONFIGURATION, SET_INTERFACE
+ */
+ struct usb_ctrlrequest setup;
+ } u;
+ enum usb_gadgetfs_event_type type;
+};
+
+
+/* The 'g' code is also used by printer gadget ioctl requests.
+ * Don't add any colliding codes to either driver, and keep
+ * them in unique ranges (size 0x20 for now).
+ */
+
+/* endpoint ioctls */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define GADGETFS_FIFO_STATUS _IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define GADGETFS_FIFO_FLUSH _IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define GADGETFS_CLEAR_HALT _IO('g', 3)
+
+#endif /* __LINUX_USB_GADGETFS_H */
--- /dev/null
+/*
+ * <linux/usb/midi.h> -- USB MIDI definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for MIDI Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/midi10.pdf
+ */
+
+#ifndef __LINUX_USB_MIDI_H
+#define __LINUX_USB_MIDI_H
+
+#include <linux/types.h>
+
+/* A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define USB_MS_HEADER 0x01
+#define USB_MS_MIDI_IN_JACK 0x02
+#define USB_MS_MIDI_OUT_JACK 0x03
+#define USB_MS_ELEMENT 0x04
+
+/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */
+#define USB_MS_GENERAL 0x01
+
+/* A.3 MS MIDI IN and OUT Jack Types */
+#define USB_MS_EMBEDDED 0x01
+#define USB_MS_EXTERNAL 0x02
+
+/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */
+struct usb_ms_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 bcdMSC;
+ __le16 wTotalLength;
+} __attribute__ ((packed));
+
+#define USB_DT_MS_HEADER_SIZE 7
+
+/* 6.1.2.2 MIDI IN Jack Descriptor */
+struct usb_midi_in_jack_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */
+ __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */
+ __u8 bJackID;
+ __u8 iJack;
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_IN_SIZE 6
+
+struct usb_midi_source_pin {
+ __u8 baSourceID;
+ __u8 baSourcePin;
+} __attribute__ ((packed));
+
+/* 6.1.2.3 MIDI OUT Jack Descriptor */
+struct usb_midi_out_jack_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */
+ __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */
+ __u8 bJackID;
+ __u8 bNrInputPins; /* p */
+ struct usb_midi_source_pin pins[]; /* [p] */
+ /*__u8 iJack; -- omitted due to variable-sized pins[] */
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \
+struct usb_midi_out_jack_descriptor_##p { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bJackType; \
+ __u8 bJackID; \
+ __u8 bNrInputPins; \
+ struct usb_midi_source_pin pins[p]; \
+ __u8 iJack; \
+} __attribute__ ((packed))
+
+/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */
+struct usb_ms_endpoint_descriptor {
+ __u8 bLength; /* 4+n */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* USB_MS_GENERAL */
+ __u8 bNumEmbMIDIJack; /* n */
+ __u8 baAssocJackID[]; /* [n] */
+} __attribute__ ((packed));
+
+#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \
+struct usb_ms_endpoint_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bNumEmbMIDIJack; \
+ __u8 baAssocJackID[n]; \
+} __attribute__ ((packed))
+
+#endif /* __LINUX_USB_MIDI_H */
--- /dev/null
+/*
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This file holds USB constants defined by the USB Device Class
+ * Definition for Test and Measurement devices published by the USB-IF.
+ *
+ * It also has the ioctl definitions for the usbtmc kernel driver that
+ * userspace needs to know about.
+ */
+
+#ifndef __LINUX_USB_TMC_H
+#define __LINUX_USB_TMC_H
+
+/* USB TMC status values */
+#define USBTMC_STATUS_SUCCESS 0x01
+#define USBTMC_STATUS_PENDING 0x02
+#define USBTMC_STATUS_FAILED 0x80
+#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81
+#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82
+#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83
+
+/* USB TMC requests values */
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4
+#define USBTMC_REQUEST_INITIATE_CLEAR 5
+#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6
+#define USBTMC_REQUEST_GET_CAPABILITIES 7
+#define USBTMC_REQUEST_INDICATOR_PULSE 64
+
+/* Request values for USBTMC driver's ioctl entry point */
+#define USBTMC_IOC_NR 91
+#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1)
+#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2)
+#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3)
+#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4)
+#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6)
+#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7)
+
+#endif
--- /dev/null
+/*
+ * USB Video Class definitions.
+ *
+ * Copyright (C) 2009 Laurent Pinchart <laurent.pinchart@skynet.be>
+ *
+ * This file holds USB constants and structures defined by the USB Device
+ * Class Definition for Video Devices. Unless otherwise stated, comments
+ * below reference relevant sections of the USB Video Class 1.1 specification
+ * available at
+ *
+ * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip
+ */
+
+#ifndef __LINUX_USB_VIDEO_H
+#define __LINUX_USB_VIDEO_H
+
+#include <linux/types.h>
+
+/* --------------------------------------------------------------------------
+ * UVC constants
+ */
+
+/* A.2. Video Interface Subclass Codes */
+#define UVC_SC_UNDEFINED 0x00
+#define UVC_SC_VIDEOCONTROL 0x01
+#define UVC_SC_VIDEOSTREAMING 0x02
+#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03
+
+/* A.3. Video Interface Protocol Codes */
+#define UVC_PC_PROTOCOL_UNDEFINED 0x00
+
+/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */
+#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00
+#define UVC_VC_HEADER 0x01
+#define UVC_VC_INPUT_TERMINAL 0x02
+#define UVC_VC_OUTPUT_TERMINAL 0x03
+#define UVC_VC_SELECTOR_UNIT 0x04
+#define UVC_VC_PROCESSING_UNIT 0x05
+#define UVC_VC_EXTENSION_UNIT 0x06
+
+/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */
+#define UVC_VS_UNDEFINED 0x00
+#define UVC_VS_INPUT_HEADER 0x01
+#define UVC_VS_OUTPUT_HEADER 0x02
+#define UVC_VS_STILL_IMAGE_FRAME 0x03
+#define UVC_VS_FORMAT_UNCOMPRESSED 0x04
+#define UVC_VS_FRAME_UNCOMPRESSED 0x05
+#define UVC_VS_FORMAT_MJPEG 0x06
+#define UVC_VS_FRAME_MJPEG 0x07
+#define UVC_VS_FORMAT_MPEG2TS 0x0a
+#define UVC_VS_FORMAT_DV 0x0c
+#define UVC_VS_COLORFORMAT 0x0d
+#define UVC_VS_FORMAT_FRAME_BASED 0x10
+#define UVC_VS_FRAME_FRAME_BASED 0x11
+#define UVC_VS_FORMAT_STREAM_BASED 0x12
+
+/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */
+#define UVC_EP_UNDEFINED 0x00
+#define UVC_EP_GENERAL 0x01
+#define UVC_EP_ENDPOINT 0x02
+#define UVC_EP_INTERRUPT 0x03
+
+/* A.8. Video Class-Specific Request Codes */
+#define UVC_RC_UNDEFINED 0x00
+#define UVC_SET_CUR 0x01
+#define UVC_GET_CUR 0x81
+#define UVC_GET_MIN 0x82
+#define UVC_GET_MAX 0x83
+#define UVC_GET_RES 0x84
+#define UVC_GET_LEN 0x85
+#define UVC_GET_INFO 0x86
+#define UVC_GET_DEF 0x87
+
+/* A.9.1. VideoControl Interface Control Selectors */
+#define UVC_VC_CONTROL_UNDEFINED 0x00
+#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01
+#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02
+
+/* A.9.2. Terminal Control Selectors */
+#define UVC_TE_CONTROL_UNDEFINED 0x00
+
+/* A.9.3. Selector Unit Control Selectors */
+#define UVC_SU_CONTROL_UNDEFINED 0x00
+#define UVC_SU_INPUT_SELECT_CONTROL 0x01
+
+/* A.9.4. Camera Terminal Control Selectors */
+#define UVC_CT_CONTROL_UNDEFINED 0x00
+#define UVC_CT_SCANNING_MODE_CONTROL 0x01
+#define UVC_CT_AE_MODE_CONTROL 0x02
+#define UVC_CT_AE_PRIORITY_CONTROL 0x03
+#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04
+#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05
+#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06
+#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07
+#define UVC_CT_FOCUS_AUTO_CONTROL 0x08
+#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09
+#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a
+#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b
+#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c
+#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d
+#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e
+#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f
+#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10
+#define UVC_CT_PRIVACY_CONTROL 0x11
+
+/* A.9.5. Processing Unit Control Selectors */
+#define UVC_PU_CONTROL_UNDEFINED 0x00
+#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01
+#define UVC_PU_BRIGHTNESS_CONTROL 0x02
+#define UVC_PU_CONTRAST_CONTROL 0x03
+#define UVC_PU_GAIN_CONTROL 0x04
+#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05
+#define UVC_PU_HUE_CONTROL 0x06
+#define UVC_PU_SATURATION_CONTROL 0x07
+#define UVC_PU_SHARPNESS_CONTROL 0x08
+#define UVC_PU_GAMMA_CONTROL 0x09
+#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a
+#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b
+#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c
+#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d
+#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e
+#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f
+#define UVC_PU_HUE_AUTO_CONTROL 0x10
+#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11
+#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12
+
+/* A.9.7. VideoStreaming Interface Control Selectors */
+#define UVC_VS_CONTROL_UNDEFINED 0x00
+#define UVC_VS_PROBE_CONTROL 0x01
+#define UVC_VS_COMMIT_CONTROL 0x02
+#define UVC_VS_STILL_PROBE_CONTROL 0x03
+#define UVC_VS_STILL_COMMIT_CONTROL 0x04
+#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05
+#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06
+#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07
+#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
+#define UVC_VS_SYNC_DELAY_CONTROL 0x09
+
+/* B.1. USB Terminal Types */
+#define UVC_TT_VENDOR_SPECIFIC 0x0100
+#define UVC_TT_STREAMING 0x0101
+
+/* B.2. Input Terminal Types */
+#define UVC_ITT_VENDOR_SPECIFIC 0x0200
+#define UVC_ITT_CAMERA 0x0201
+#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202
+
+/* B.3. Output Terminal Types */
+#define UVC_OTT_VENDOR_SPECIFIC 0x0300
+#define UVC_OTT_DISPLAY 0x0301
+#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302
+
+/* B.4. External Terminal Types */
+#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400
+#define UVC_COMPOSITE_CONNECTOR 0x0401
+#define UVC_SVIDEO_CONNECTOR 0x0402
+#define UVC_COMPONENT_CONNECTOR 0x0403
+
+/* 2.4.2.2. Status Packet Type */
+#define UVC_STATUS_TYPE_CONTROL 1
+#define UVC_STATUS_TYPE_STREAMING 2
+
+/* 2.4.3.3. Payload Header Information */
+#define UVC_STREAM_EOH (1 << 7)
+#define UVC_STREAM_ERR (1 << 6)
+#define UVC_STREAM_STI (1 << 5)
+#define UVC_STREAM_RES (1 << 4)
+#define UVC_STREAM_SCR (1 << 3)
+#define UVC_STREAM_PTS (1 << 2)
+#define UVC_STREAM_EOF (1 << 1)
+#define UVC_STREAM_FID (1 << 0)
+
+/* 4.1.2. Control Capabilities */
+#define UVC_CONTROL_CAP_GET (1 << 0)
+#define UVC_CONTROL_CAP_SET (1 << 1)
+#define UVC_CONTROL_CAP_DISABLED (1 << 2)
+#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3)
+#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4)
+
+/* ------------------------------------------------------------------------
+ * UVC structures
+ */
+
+/* All UVC descriptors have these 3 fields at the beginning */
+struct uvc_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+} __attribute__((packed));
+
+/* 3.7.2. Video Control Interface Header Descriptor */
+struct uvc_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u16 bcdUVC;
+ __u16 wTotalLength;
+ __u32 dwClockFrequency;
+ __u8 bInCollection;
+ __u8 baInterfaceNr[];
+} __attribute__((__packed__));
+
+#define UVC_DT_HEADER_SIZE(n) (12+(n))
+
+#define UVC_HEADER_DESCRIPTOR(n) \
+ uvc_header_descriptor_##n
+
+#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \
+struct UVC_HEADER_DESCRIPTOR(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u16 bcdUVC; \
+ __u16 wTotalLength; \
+ __u32 dwClockFrequency; \
+ __u8 bInCollection; \
+ __u8 baInterfaceNr[n]; \
+} __attribute__ ((packed))
+
+/* 3.7.2.1. Input Terminal Descriptor */
+struct uvc_input_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_TERMINAL_SIZE 8
+
+/* 3.7.2.2. Output Terminal Descriptor */
+struct uvc_output_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bSourceID;
+ __u8 iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_TERMINAL_SIZE 9
+
+/* 3.7.2.3. Camera Terminal Descriptor */
+struct uvc_camera_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 iTerminal;
+ __u16 wObjectiveFocalLengthMin;
+ __u16 wObjectiveFocalLengthMax;
+ __u16 wOcularFocalLength;
+ __u8 bControlSize;
+ __u8 bmControls[3];
+} __attribute__((__packed__));
+
+#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n))
+
+/* 3.7.2.4. Selector Unit Descriptor */
+struct uvc_selector_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bUnitID;
+ __u8 bNrInPins;
+ __u8 baSourceID[0];
+ __u8 iSelector;
+} __attribute__((__packed__));
+
+#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n))
+
+#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \
+ uvc_selector_unit_descriptor_##n
+
+#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \
+struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bUnitID; \
+ __u8 bNrInPins; \
+ __u8 baSourceID[n]; \
+ __u8 iSelector; \
+} __attribute__ ((packed))
+
+/* 3.7.2.5. Processing Unit Descriptor */
+struct uvc_processing_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u16 wMaxMultiplier;
+ __u8 bControlSize;
+ __u8 bmControls[2];
+ __u8 iProcessing;
+} __attribute__((__packed__));
+
+#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n))
+
+/* 3.7.2.6. Extension Unit Descriptor */
+struct uvc_extension_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bUnitID;
+ __u8 guidExtensionCode[16];
+ __u8 bNumControls;
+ __u8 bNrInPins;
+ __u8 baSourceID[0];
+ __u8 bControlSize;
+ __u8 bmControls[0];
+ __u8 iExtension;
+} __attribute__((__packed__));
+
+#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n))
+
+#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+ uvc_extension_unit_descriptor_##p_##n
+
+#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bUnitID; \
+ __u8 guidExtensionCode[16]; \
+ __u8 bNumControls; \
+ __u8 bNrInPins; \
+ __u8 baSourceID[p]; \
+ __u8 bControlSize; \
+ __u8 bmControls[n]; \
+ __u8 iExtension; \
+} __attribute__ ((packed))
+
+/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */
+struct uvc_control_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u16 wMaxTransferSize;
+} __attribute__((__packed__));
+
+#define UVC_DT_CONTROL_ENDPOINT_SIZE 5
+
+/* 3.9.2.1. Input Header Descriptor */
+struct uvc_input_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bNumFormats;
+ __u16 wTotalLength;
+ __u8 bEndpointAddress;
+ __u8 bmInfo;
+ __u8 bTerminalLink;
+ __u8 bStillCaptureMethod;
+ __u8 bTriggerSupport;
+ __u8 bTriggerUsage;
+ __u8 bControlSize;
+ __u8 bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p))
+
+#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+ uvc_input_header_descriptor_##n_##p
+
+#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bNumFormats; \
+ __u16 wTotalLength; \
+ __u8 bEndpointAddress; \
+ __u8 bmInfo; \
+ __u8 bTerminalLink; \
+ __u8 bStillCaptureMethod; \
+ __u8 bTriggerSupport; \
+ __u8 bTriggerUsage; \
+ __u8 bControlSize; \
+ __u8 bmaControls[p][n]; \
+} __attribute__ ((packed))
+
+/* 3.9.2.2. Output Header Descriptor */
+struct uvc_output_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bNumFormats;
+ __u16 wTotalLength;
+ __u8 bEndpointAddress;
+ __u8 bTerminalLink;
+ __u8 bControlSize;
+ __u8 bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p))
+
+#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+ uvc_output_header_descriptor_##n_##p
+
+#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bNumFormats; \
+ __u16 wTotalLength; \
+ __u8 bEndpointAddress; \
+ __u8 bTerminalLink; \
+ __u8 bControlSize; \
+ __u8 bmaControls[p][n]; \
+} __attribute__ ((packed))
+
+/* 3.9.2.6. Color matching descriptor */
+struct uvc_color_matching_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bColorPrimaries;
+ __u8 bTransferCharacteristics;
+ __u8 bMatrixCoefficients;
+} __attribute__((__packed__));
+
+#define UVC_DT_COLOR_MATCHING_SIZE 6
+
+/* 4.3.1.1. Video Probe and Commit Controls */
+struct uvc_streaming_control {
+ __u16 bmHint;
+ __u8 bFormatIndex;
+ __u8 bFrameIndex;
+ __u32 dwFrameInterval;
+ __u16 wKeyFrameRate;
+ __u16 wPFrameRate;
+ __u16 wCompQuality;
+ __u16 wCompWindowSize;
+ __u16 wDelay;
+ __u32 dwMaxVideoFrameSize;
+ __u32 dwMaxPayloadTransferSize;
+ __u32 dwClockFrequency;
+ __u8 bmFramingInfo;
+ __u8 bPreferedVersion;
+ __u8 bMinVersion;
+ __u8 bMaxVersion;
+} __attribute__((__packed__));
+
+/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */
+struct uvc_format_uncompressed {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFormatIndex;
+ __u8 bNumFrameDescriptors;
+ __u8 guidFormat[16];
+ __u8 bBitsPerPixel;
+ __u8 bDefaultFrameIndex;
+ __u8 bAspectRatioX;
+ __u8 bAspectRatioY;
+ __u8 bmInterfaceFlags;
+ __u8 bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27
+
+/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */
+struct uvc_frame_uncompressed {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFrameIndex;
+ __u8 bmCapabilities;
+ __u16 wWidth;
+ __u16 wHeight;
+ __u32 dwMinBitRate;
+ __u32 dwMaxBitRate;
+ __u32 dwMaxVideoFrameBufferSize;
+ __u32 dwDefaultFrameInterval;
+ __u8 bFrameIntervalType;
+ __u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n))
+
+#define UVC_FRAME_UNCOMPRESSED(n) \
+ uvc_frame_uncompressed_##n
+
+#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \
+struct UVC_FRAME_UNCOMPRESSED(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bFrameIndex; \
+ __u8 bmCapabilities; \
+ __u16 wWidth; \
+ __u16 wHeight; \
+ __u32 dwMinBitRate; \
+ __u32 dwMaxBitRate; \
+ __u32 dwMaxVideoFrameBufferSize; \
+ __u32 dwDefaultFrameInterval; \
+ __u8 bFrameIntervalType; \
+ __u32 dwFrameInterval[n]; \
+} __attribute__ ((packed))
+
+/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */
+struct uvc_format_mjpeg {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFormatIndex;
+ __u8 bNumFrameDescriptors;
+ __u8 bmFlags;
+ __u8 bDefaultFrameIndex;
+ __u8 bAspectRatioX;
+ __u8 bAspectRatioY;
+ __u8 bmInterfaceFlags;
+ __u8 bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_MJPEG_SIZE 11
+
+/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */
+struct uvc_frame_mjpeg {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFrameIndex;
+ __u8 bmCapabilities;
+ __u16 wWidth;
+ __u16 wHeight;
+ __u32 dwMinBitRate;
+ __u32 dwMaxBitRate;
+ __u32 dwMaxVideoFrameBufferSize;
+ __u32 dwDefaultFrameInterval;
+ __u8 bFrameIntervalType;
+ __u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n))
+
+#define UVC_FRAME_MJPEG(n) \
+ uvc_frame_mjpeg_##n
+
+#define DECLARE_UVC_FRAME_MJPEG(n) \
+struct UVC_FRAME_MJPEG(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bFrameIndex; \
+ __u8 bmCapabilities; \
+ __u16 wWidth; \
+ __u16 wHeight; \
+ __u32 dwMinBitRate; \
+ __u32 dwMaxBitRate; \
+ __u32 dwMaxVideoFrameBufferSize; \
+ __u32 dwDefaultFrameInterval; \
+ __u8 bFrameIntervalType; \
+ __u32 dwFrameInterval[n]; \
+} __attribute__ ((packed))
+
+#endif /* __LINUX_USB_VIDEO_H */
+
extern struct key *modsign_keyring;
-extern int mod_verify_sig(const void *mod, unsigned long modlen,
- const void *sig, unsigned long siglen);
+extern int mod_verify_sig(const void *mod, unsigned long *_modlen);
#ifdef CONFIG_MODULE_SIG
static int module_sig_check(struct load_info *info,
- const void *mod, unsigned long *len)
+ const void *mod, unsigned long *_len)
{
int err = -ENOKEY;
- const unsigned long markerlen = sizeof(MODULE_SIG_STRING) - 1;
- const void *p = mod, *end = mod + *len;
-
- /* Poor man's memmem. */
- while ((p = memchr(p, MODULE_SIG_STRING[0], end - p))) {
- if (p + markerlen > end)
- break;
-
- if (memcmp(p, MODULE_SIG_STRING, markerlen) == 0) {
- const void *sig = p + markerlen;
- /* Truncate module up to signature. */
- *len = p - mod;
- err = mod_verify_sig(mod, *len, sig, end - sig);
- break;
- }
- p++;
+ unsigned long markerlen = sizeof(MODULE_SIG_STRING) - 1;
+ unsigned long len = *_len;
+
+ if (len > markerlen &&
+ memcmp(mod + len - markerlen, MODULE_SIG_STRING, markerlen) == 0) {
+ /* We truncate the module to discard the signature */
+ *_len -= markerlen;
+ err = mod_verify_sig(mod, _len);
}
if (!err) {
/*
* Verify the signature on a module.
*/
-int mod_verify_sig(const void *mod, unsigned long modlen,
- const void *sig, unsigned long siglen)
+int mod_verify_sig(const void *mod, unsigned long *_modlen)
{
struct public_key_signature *pks;
struct module_signature ms;
struct key *key;
- size_t sig_len;
+ const void *sig;
+ size_t modlen = *_modlen, sig_len;
int ret;
- pr_devel("==>%s(,%lu,,%lu,)\n", __func__, modlen, siglen);
+ pr_devel("==>%s(,%lu)\n", __func__, modlen);
- if (siglen <= sizeof(ms))
+ if (modlen <= sizeof(ms))
return -EBADMSG;
- memcpy(&ms, sig + (siglen - sizeof(ms)), sizeof(ms));
- siglen -= sizeof(ms);
+ memcpy(&ms, mod + (modlen - sizeof(ms)), sizeof(ms));
+ modlen -= sizeof(ms);
sig_len = be32_to_cpu(ms.sig_len);
- if (sig_len >= siglen ||
- siglen - sig_len != (size_t)ms.signer_len + ms.key_id_len)
+ if (sig_len >= modlen)
return -EBADMSG;
+ modlen -= sig_len;
+ if ((size_t)ms.signer_len + ms.key_id_len >= modlen)
+ return -EBADMSG;
+ modlen -= (size_t)ms.signer_len + ms.key_id_len;
+
+ *_modlen = modlen;
+ sig = mod + modlen;
/* For the moment, only support RSA and X.509 identifiers */
if (ms.algo != PKEY_ALGO_RSA ||
return create_pid_namespace(old_ns);
}
-void free_pid_ns(struct kref *kref)
+static void free_pid_ns(struct kref *kref)
{
- struct pid_namespace *ns, *parent;
+ struct pid_namespace *ns;
ns = container_of(kref, struct pid_namespace, kref);
-
- parent = ns->parent;
destroy_pid_namespace(ns);
+}
- if (parent != NULL)
- put_pid_ns(parent);
+void put_pid_ns(struct pid_namespace *ns)
+{
+ struct pid_namespace *parent;
+
+ while (ns != &init_pid_ns) {
+ parent = ns->parent;
+ if (!kref_put(&ns->kref, free_pid_ns))
+ break;
+ ns = parent;
+ }
}
-EXPORT_SYMBOL_GPL(free_pid_ns);
+EXPORT_SYMBOL_GPL(put_pid_ns);
void zap_pid_ns_processes(struct pid_namespace *pid_ns)
{
* Work around broken programs that cannot handle "Linux 3.0".
* Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
*/
-static int override_release(char __user *release, int len)
+static int override_release(char __user *release, size_t len)
{
int ret = 0;
- char buf[65];
if (current->personality & UNAME26) {
- char *rest = UTS_RELEASE;
+ const char *rest = UTS_RELEASE;
+ char buf[65] = { 0 };
int ndots = 0;
unsigned v;
+ size_t copy;
while (*rest) {
if (*rest == '.' && ++ndots >= 3)
rest++;
}
v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
- snprintf(buf, len, "2.6.%u%s", v, rest);
- ret = copy_to_user(release, buf, len);
+ copy = min(sizeof(buf), max_t(size_t, 1, len));
+ copy = scnprintf(buf, copy, "2.6.%u%s", v, rest);
+ ret = copy_to_user(release, buf, copy + 1);
}
return ret;
}
match_fn match)
{
struct dma_debug_entry *entry, *ret = NULL;
- int matches = 0, match_lvl, last_lvl = 0;
+ int matches = 0, match_lvl, last_lvl = -1;
list_for_each_entry(entry, &bucket->list, list) {
if (!match(ref, entry))
} else if (match_lvl > last_lvl) {
/*
* We found an entry that fits better then the
- * previous one
+ * previous one or it is the 1st match.
*/
last_lvl = match_lvl;
ret = entry;
* pages requested were isolated. If there were any failures, 0 is
* returned and CMA will fail.
*/
- if (strict && nr_strict_required != total_isolated)
+ if (strict && nr_strict_required > total_isolated)
total_isolated = 0;
if (locked)
if (vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR))
goto out;
- if (!vma->vm_ops->remap_pages)
+ if (!vma->vm_ops || !vma->vm_ops->remap_pages)
goto out;
if (start < vma->vm_start || start + size > vma->vm_end)
__do_kmalloc_node(size_t size, gfp_t gfp, int node, unsigned long caller)
{
unsigned int *m;
- int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+ int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
void *ret;
gfp &= gfp_allowed_mask;
sp = virt_to_page(block);
if (PageSlab(sp)) {
- int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+ int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
unsigned int *m = (unsigned int *)(block - align);
slob_free(m, *m + align);
} else
sp = virt_to_page(block);
if (PageSlab(sp)) {
- int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+ int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
unsigned int *m = (unsigned int *)(block - align);
return SLOB_UNITS(*m) * SLOB_UNIT;
} else
hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL);
}
+ tty->driver_data = self;
+
return tty_port_install(&self->port, driver, tty);
}
size_t count, loff_t *ppos,
struct cache_detail *cd)
{
- char tbuf[20];
+ char tbuf[22];
unsigned long p = *ppos;
size_t len;
- sprintf(tbuf, "%lu\n", convert_to_wallclock(cd->flush_time));
+ snprintf(tbuf, sizeof(tbuf), "%lu\n", convert_to_wallclock(cd->flush_time));
len = strlen(tbuf);
if (p >= len)
return 0;
@:
quiet_cmd_modules_install = INSTALL $@
- cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@)
+ cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@)
# Modules built outside the kernel source tree go into extra by default
INSTALL_MOD_DIR ?= extra
# 3) create one <module>.mod.c file pr. module
# 4) create one Module.symvers file with CRC for all exported symbols
# 5) compile all <module>.mod.c files
-# 6) final link of the module to a <module.ko> (or <module.unsigned>) file
-# 7) signs the modules to a <module.ko> file
+# 6) final link of the module to a <module.ko> file
# Step 3 is used to place certain information in the module's ELF
# section, including information such as:
# Step 4 is solely used to allow module versioning in external modules,
# where the CRC of each module is retrieved from the Module.symvers file.
-# Step 7 is dependent on CONFIG_MODULE_SIG being enabled.
-
# KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
# symbols in the final module linking stage
# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
targets += $(modules:.ko=.mod.o)
# Step 6), final link of the modules
-ifneq ($(CONFIG_MODULE_SIG),y)
quiet_cmd_ld_ko_o = LD [M] $@
cmd_ld_ko_o = $(LD) -r $(LDFLAGS) \
$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
$(call if_changed,ld_ko_o)
targets += $(modules)
-else
-quiet_cmd_ld_ko_unsigned_o = LD [M] $@
- cmd_ld_ko_unsigned_o = \
- $(LD) -r $(LDFLAGS) \
- $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
- -o $@ $(filter-out FORCE,$^) \
- $(if $(AFTER_LINK),; $(AFTER_LINK))
-
-$(modules:.ko=.ko.unsigned): %.ko.unsigned :%.o %.mod.o FORCE
- $(call if_changed,ld_ko_unsigned_o)
-
-targets += $(modules:.ko=.ko.unsigned)
-
-# Step 7), sign the modules
-MODSECKEY = ./signing_key.priv
-MODPUBKEY = ./signing_key.x509
-
-ifeq ($(wildcard $(MODSECKEY))+$(wildcard $(MODPUBKEY)),$(MODSECKEY)+$(MODPUBKEY))
-ifeq ($(KBUILD_SRC),)
- # no O= is being used
- SCRIPTS_DIR := scripts
-else
- SCRIPTS_DIR := $(KBUILD_SRC)/scripts
-endif
-SIGN_MODULES := 1
-else
-SIGN_MODULES := 0
-endif
-
-# only sign if it's an in-tree module
-ifneq ($(KBUILD_EXTMOD),)
-SIGN_MODULES := 0
-endif
-# We strip the module as best we can - note that using both strip and eu-strip
-# results in a smaller module than using either alone.
-EU_STRIP = $(shell which eu-strip || echo true)
-
-quiet_cmd_sign_ko_stripped_ko_unsigned = STRIP [M] $@
- cmd_sign_ko_stripped_ko_unsigned = \
- cp $< $@ && \
- strip -x -g $@ && \
- $(EU_STRIP) $@
-
-ifeq ($(SIGN_MODULES),1)
-
-quiet_cmd_genkeyid = GENKEYID $@
- cmd_genkeyid = \
- perl $(SCRIPTS_DIR)/x509keyid $< $<.signer $<.keyid
-
-%.signer %.keyid: %
- $(call if_changed,genkeyid)
-
-KEYRING_DEP := $(MODSECKEY) $(MODPUBKEY) $(MODPUBKEY).signer $(MODPUBKEY).keyid
-quiet_cmd_sign_ko_ko_stripped = SIGN [M] $@
- cmd_sign_ko_ko_stripped = \
- sh $(SCRIPTS_DIR)/sign-file $(MODSECKEY) $(MODPUBKEY) $< $@
-else
-KEYRING_DEP :=
-quiet_cmd_sign_ko_ko_unsigned = NO SIGN [M] $@
- cmd_sign_ko_ko_unsigned = \
- cp $< $@
-endif
-
-$(modules): %.ko :%.ko.stripped $(KEYRING_DEP) FORCE
- $(call if_changed,sign_ko_ko_stripped)
-
-$(patsubst %.ko,%.ko.stripped,$(modules)): %.ko.stripped :%.ko.unsigned FORCE
- $(call if_changed,sign_ko_stripped_ko_unsigned)
-
-targets += $(modules)
-endif
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
-#!/bin/sh
+#!/usr/bin/perl -w
#
# Sign a module file using the given key.
#
-# Format: sign-file <key> <x509> <src-file> <dst-file>
-#
-
-scripts=`dirname $0`
-
-CONFIG_MODULE_SIG_SHA512=y
-if [ -r .config ]
-then
- . ./.config
-fi
-
-key="$1"
-x509="$2"
-src="$3"
-dst="$4"
-
-if [ ! -r "$key" ]
-then
- echo "Can't read private key" >&2
- exit 2
-fi
-
-if [ ! -r "$x509" ]
-then
- echo "Can't read X.509 certificate" >&2
- exit 2
-fi
-if [ ! -r "$x509.signer" ]
-then
- echo "Can't read Signer name" >&2
- exit 2;
-fi
-if [ ! -r "$x509.keyid" ]
-then
- echo "Can't read Key identifier" >&2
- exit 2;
-fi
+# Format:
+#
+# ./scripts/sign-file [-v] <key> <x509> <module> [<dest>]
+#
+#
+use strict;
+use FileHandle;
+use IPC::Open2;
+
+my $verbose = 0;
+if ($#ARGV >= 0 && $ARGV[0] eq "-v") {
+ $verbose = 1;
+ shift;
+}
+
+die "Format: ./scripts/sign-file [-v] <key> <x509> <module> [<dest>]\n"
+ if ($#ARGV != 2 && $#ARGV != 3);
+
+my $private_key = $ARGV[0];
+my $x509 = $ARGV[1];
+my $module = $ARGV[2];
+my $dest = ($#ARGV == 3) ? $ARGV[3] : $ARGV[2] . "~";
+
+die "Can't read private key\n" unless (-r $private_key);
+die "Can't read X.509 certificate\n" unless (-r $x509);
+die "Can't read module\n" unless (-r $module);
+
+#
+# Read the kernel configuration
+#
+my %config = (
+ CONFIG_MODULE_SIG_SHA512 => 1
+ );
+
+if (-r ".config") {
+ open(FD, "<.config") || die ".config";
+ while (<FD>) {
+ if ($_ =~ /^(CONFIG_.*)=[ym]/) {
+ $config{$1} = 1;
+ }
+ }
+ close(FD);
+}
+
+#
+# Function to read the contents of a file into a variable.
+#
+sub read_file($)
+{
+ my ($file) = @_;
+ my $contents;
+ my $len;
+
+ open(FD, "<$file") || die $file;
+ binmode FD;
+ my @st = stat(FD);
+ die $file if (!@st);
+ $len = read(FD, $contents, $st[7]) || die $file;
+ close(FD) || die $file;
+ die "$file: Wanted length ", $st[7], ", got ", $len, "\n"
+ if ($len != $st[7]);
+ return $contents;
+}
+
+###############################################################################
+#
+# First of all, we have to parse the X.509 certificate to find certain details
+# about it.
+#
+# We read the DER-encoded X509 certificate and parse it to extract the Subject
+# name and Subject Key Identifier. Theis provides the data we need to build
+# the certificate identifier.
+#
+# The signer's name part of the identifier is fabricated from the commonName,
+# the organizationName or the emailAddress components of the X.509 subject
+# name.
+#
+# The subject key ID is used to select which of that signer's certificates
+# we're intending to use to sign the module.
+#
+###############################################################################
+my $x509_certificate = read_file($x509);
+
+my $UNIV = 0 << 6;
+my $APPL = 1 << 6;
+my $CONT = 2 << 6;
+my $PRIV = 3 << 6;
+
+my $CONS = 0x20;
+
+my $BOOLEAN = 0x01;
+my $INTEGER = 0x02;
+my $BIT_STRING = 0x03;
+my $OCTET_STRING = 0x04;
+my $NULL = 0x05;
+my $OBJ_ID = 0x06;
+my $UTF8String = 0x0c;
+my $SEQUENCE = 0x10;
+my $SET = 0x11;
+my $UTCTime = 0x17;
+my $GeneralizedTime = 0x18;
+
+my %OIDs = (
+ pack("CCC", 85, 4, 3) => "commonName",
+ pack("CCC", 85, 4, 6) => "countryName",
+ pack("CCC", 85, 4, 10) => "organizationName",
+ pack("CCC", 85, 4, 11) => "organizationUnitName",
+ pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 1) => "rsaEncryption",
+ pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 5) => "sha1WithRSAEncryption",
+ pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 9, 1) => "emailAddress",
+ pack("CCC", 85, 29, 35) => "authorityKeyIdentifier",
+ pack("CCC", 85, 29, 14) => "subjectKeyIdentifier",
+ pack("CCC", 85, 29, 19) => "basicConstraints"
+);
+
+###############################################################################
+#
+# Extract an ASN.1 element from a string and return information about it.
+#
+###############################################################################
+sub asn1_extract($$@)
+{
+ my ($cursor, $expected_tag, $optional) = @_;
+
+ return [ -1 ]
+ if ($cursor->[1] == 0 && $optional);
+
+ die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (elem ", $cursor->[1], ")\n"
+ if ($cursor->[1] < 2);
+
+ my ($tag, $len) = unpack("CC", substr(${$cursor->[2]}, $cursor->[0], 2));
+
+ if ($expected_tag != -1 && $tag != $expected_tag) {
+ return [ -1 ]
+ if ($optional);
+ die $x509, ": ", $cursor->[0], ": ASN.1 unexpected tag (", $tag,
+ " not ", $expected_tag, ")\n";
+ }
+
+ $cursor->[0] += 2;
+ $cursor->[1] -= 2;
+
+ die $x509, ": ", $cursor->[0], ": ASN.1 long tag\n"
+ if (($tag & 0x1f) == 0x1f);
+ die $x509, ": ", $cursor->[0], ": ASN.1 indefinite length\n"
+ if ($len == 0x80);
+
+ if ($len > 0x80) {
+ my $l = $len - 0x80;
+ die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (len len $l)\n"
+ if ($cursor->[1] < $l);
+
+ if ($l == 0x1) {
+ $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1));
+ } elsif ($l = 0x2) {
+ $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2));
+ } elsif ($l = 0x3) {
+ $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16;
+ $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2));
+ } elsif ($l = 0x4) {
+ $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4));
+ } else {
+ die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n";
+ }
+
+ $cursor->[0] += $l;
+ $cursor->[1] -= $l;
+ }
+
+ die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (", $len, ")\n"
+ if ($cursor->[1] < $len);
+
+ my $ret = [ $tag, [ $cursor->[0], $len, $cursor->[2] ] ];
+ $cursor->[0] += $len;
+ $cursor->[1] -= $len;
+
+ return $ret;
+}
+
+###############################################################################
+#
+# Retrieve the data referred to by a cursor
+#
+###############################################################################
+sub asn1_retrieve($)
+{
+ my ($cursor) = @_;
+ my ($offset, $len, $data) = @$cursor;
+ return substr($$data, $offset, $len);
+}
+
+###############################################################################
+#
+# Roughly parse the X.509 certificate
+#
+###############################################################################
+my $cursor = [ 0, length($x509_certificate), \$x509_certificate ];
+
+my $cert = asn1_extract($cursor, $UNIV | $CONS | $SEQUENCE);
+my $tbs = asn1_extract($cert->[1], $UNIV | $CONS | $SEQUENCE);
+my $version = asn1_extract($tbs->[1], $CONT | $CONS | 0, 1);
+my $serial_number = asn1_extract($tbs->[1], $UNIV | $INTEGER);
+my $sig_type = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
+my $issuer = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
+my $validity = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
+my $subject = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
+my $key = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
+my $issuer_uid = asn1_extract($tbs->[1], $CONT | $CONS | 1, 1);
+my $subject_uid = asn1_extract($tbs->[1], $CONT | $CONS | 2, 1);
+my $extension_list = asn1_extract($tbs->[1], $CONT | $CONS | 3, 1);
+
+my $subject_key_id = ();
+my $authority_key_id = ();
+
+#
+# Parse the extension list
+#
+if ($extension_list->[0] != -1) {
+ my $extensions = asn1_extract($extension_list->[1], $UNIV | $CONS | $SEQUENCE);
+
+ while ($extensions->[1]->[1] > 0) {
+ my $ext = asn1_extract($extensions->[1], $UNIV | $CONS | $SEQUENCE);
+ my $x_oid = asn1_extract($ext->[1], $UNIV | $OBJ_ID);
+ my $x_crit = asn1_extract($ext->[1], $UNIV | $BOOLEAN, 1);
+ my $x_val = asn1_extract($ext->[1], $UNIV | $OCTET_STRING);
+
+ my $raw_oid = asn1_retrieve($x_oid->[1]);
+ next if (!exists($OIDs{$raw_oid}));
+ my $x_type = $OIDs{$raw_oid};
+
+ my $raw_value = asn1_retrieve($x_val->[1]);
+
+ if ($x_type eq "subjectKeyIdentifier") {
+ my $vcursor = [ 0, length($raw_value), \$raw_value ];
+
+ $subject_key_id = asn1_extract($vcursor, $UNIV | $OCTET_STRING);
+ }
+ }
+}
+
+###############################################################################
+#
+# Determine what we're going to use as the signer's name. In order of
+# preference, take one of: commonName, organizationName or emailAddress.
+#
+###############################################################################
+my $org = "";
+my $cn = "";
+my $email = "";
+
+while ($subject->[1]->[1] > 0) {
+ my $rdn = asn1_extract($subject->[1], $UNIV | $CONS | $SET);
+ my $attr = asn1_extract($rdn->[1], $UNIV | $CONS | $SEQUENCE);
+ my $n_oid = asn1_extract($attr->[1], $UNIV | $OBJ_ID);
+ my $n_val = asn1_extract($attr->[1], -1);
+
+ my $raw_oid = asn1_retrieve($n_oid->[1]);
+ next if (!exists($OIDs{$raw_oid}));
+ my $n_type = $OIDs{$raw_oid};
+
+ my $raw_value = asn1_retrieve($n_val->[1]);
+
+ if ($n_type eq "organizationName") {
+ $org = $raw_value;
+ } elsif ($n_type eq "commonName") {
+ $cn = $raw_value;
+ } elsif ($n_type eq "emailAddress") {
+ $email = $raw_value;
+ }
+}
+
+my $signers_name = $email;
+
+if ($org && $cn) {
+ # Don't use the organizationName if the commonName repeats it
+ if (length($org) <= length($cn) &&
+ substr($cn, 0, length($org)) eq $org) {
+ $signers_name = $cn;
+ goto got_id_name;
+ }
+
+ # Or a signifcant chunk of it
+ if (length($org) >= 7 &&
+ length($cn) >= 7 &&
+ substr($cn, 0, 7) eq substr($org, 0, 7)) {
+ $signers_name = $cn;
+ goto got_id_name;
+ }
+
+ $signers_name = $org . ": " . $cn;
+} elsif ($org) {
+ $signers_name = $org;
+} elsif ($cn) {
+ $signers_name = $cn;
+}
+
+got_id_name:
+
+die $x509, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n"
+ if (!$subject_key_id);
+
+my $key_identifier = asn1_retrieve($subject_key_id->[1]);
+
+###############################################################################
+#
+# Create and attach the module signature
+#
+###############################################################################
#
# Signature parameters
#
-algo=1 # Public-key crypto algorithm: RSA
-hash= # Digest algorithm
-id_type=1 # Identifier type: X.509
+my $algo = 1; # Public-key crypto algorithm: RSA
+my $hash = 0; # Digest algorithm
+my $id_type = 1; # Identifier type: X.509
#
# Digest the data
#
-dgst=
-if [ "$CONFIG_MODULE_SIG_SHA1" = "y" ]
-then
- prologue="0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2B, 0x0E, 0x03, 0x02, 0x1A, 0x05, 0x00, 0x04, 0x14"
- dgst=-sha1
- hash=2
-elif [ "$CONFIG_MODULE_SIG_SHA224" = "y" ]
-then
- prologue="0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, 0x05, 0x00, 0x04, 0x1C"
- dgst=-sha224
- hash=7
-elif [ "$CONFIG_MODULE_SIG_SHA256" = "y" ]
-then
- prologue="0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20"
- dgst=-sha256
- hash=4
-elif [ "$CONFIG_MODULE_SIG_SHA384" = "y" ]
-then
- prologue="0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, 0x05, 0x00, 0x04, 0x30"
- dgst=-sha384
- hash=5
-elif [ "$CONFIG_MODULE_SIG_SHA512" = "y" ]
-then
- prologue="0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, 0x05, 0x00, 0x04, 0x40"
- dgst=-sha512
- hash=6
-else
- echo "$0: Can't determine hash algorithm" >&2
- exit 2
-fi
-
-(
-perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $?
-openssl dgst $dgst -binary $src || exit $?
-) >$src.dig || exit $?
+my ($dgst, $prologue) = ();
+if (exists $config{"CONFIG_MODULE_SIG_SHA1"}) {
+ $prologue = pack("C*",
+ 0x30, 0x21, 0x30, 0x09, 0x06, 0x05,
+ 0x2B, 0x0E, 0x03, 0x02, 0x1A,
+ 0x05, 0x00, 0x04, 0x14);
+ $dgst = "-sha1";
+ $hash = 2;
+} elsif (exists $config{"CONFIG_MODULE_SIG_SHA224"}) {
+ $prologue = pack("C*",
+ 0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09,
+ 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04,
+ 0x05, 0x00, 0x04, 0x1C);
+ $dgst = "-sha224";
+ $hash = 7;
+} elsif (exists $config{"CONFIG_MODULE_SIG_SHA256"}) {
+ $prologue = pack("C*",
+ 0x30, 0x31, 0x30, 0x0d, 0x06, 0x09,
+ 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01,
+ 0x05, 0x00, 0x04, 0x20);
+ $dgst = "-sha256";
+ $hash = 4;
+} elsif (exists $config{"CONFIG_MODULE_SIG_SHA384"}) {
+ $prologue = pack("C*",
+ 0x30, 0x41, 0x30, 0x0d, 0x06, 0x09,
+ 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02,
+ 0x05, 0x00, 0x04, 0x30);
+ $dgst = "-sha384";
+ $hash = 5;
+} elsif (exists $config{"CONFIG_MODULE_SIG_SHA512"}) {
+ $prologue = pack("C*",
+ 0x30, 0x51, 0x30, 0x0d, 0x06, 0x09,
+ 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03,
+ 0x05, 0x00, 0x04, 0x40);
+ $dgst = "-sha512";
+ $hash = 6;
+} else {
+ die "Can't determine hash algorithm";
+}
+
+#
+# Generate the digest and read from openssl's stdout
+#
+my $digest;
+$digest = readpipe("openssl dgst $dgst -binary $module") || die "openssl dgst";
#
# Generate the binary signature, which will be just the integer that comprises
# the signature with no metadata attached.
#
-openssl rsautl -sign -inkey $key -keyform PEM -in $src.dig -out $src.sig || exit $?
-signerlen=`stat -c %s $x509.signer`
-keyidlen=`stat -c %s $x509.keyid`
-siglen=`stat -c %s $src.sig`
+my $pid;
+$pid = open2(*read_from, *write_to,
+ "openssl rsautl -sign -inkey $private_key -keyform PEM") ||
+ die "openssl rsautl";
+binmode write_to;
+print write_to $prologue . $digest || die "pipe to openssl rsautl";
+close(write_to) || die "pipe to openssl rsautl";
+
+binmode read_from;
+my $signature;
+read(read_from, $signature, 4096) || die "pipe from openssl rsautl";
+close(read_from) || die "pipe from openssl rsautl";
+$signature = pack("n", length($signature)) . $signature,
+
+waitpid($pid, 0) || die;
+die "openssl rsautl died: $?" if ($? >> 8);
#
# Build the signed binary
#
-(
- cat $src || exit $?
- echo '~Module signature appended~' || exit $?
- cat $x509.signer $x509.keyid || exit $?
+my $unsigned_module = read_file($module);
+
+my $magic_number = "~Module signature appended~\n";
+
+my $info = pack("CCCCCxxxN",
+ $algo, $hash, $id_type,
+ length($signers_name),
+ length($key_identifier),
+ length($signature));
- # Preface each signature integer with a 2-byte BE length
- perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $?
- cat $src.sig || exit $?
+if ($verbose) {
+ print "Size of unsigned module: ", length($unsigned_module), "\n";
+ print "Size of signer's name : ", length($signers_name), "\n";
+ print "Size of key identifier : ", length($key_identifier), "\n";
+ print "Size of signature : ", length($signature), "\n";
+ print "Size of informaton : ", length($info), "\n";
+ print "Size of magic number : ", length($magic_number), "\n";
+ print "Signer's name : '", $signers_name, "'\n";
+ print "Digest : $dgst\n";
+}
- # Generate the information block
- perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $?
-) >$dst~ || exit $?
+open(FD, ">$dest") || die $dest;
+binmode FD;
+print FD
+ $unsigned_module,
+ $signers_name,
+ $key_identifier,
+ $signature,
+ $info,
+ $magic_number
+ ;
+close FD || die $dest;
-# Permit in-place signing
-mv $dst~ $dst || exit $?
+if ($#ARGV != 3) {
+ rename($dest, $module) || die $module;
+}
+++ /dev/null
-#!/usr/bin/perl -w
-#
-# Generate an identifier from an X.509 certificate that can be placed in a
-# module signature to indentify the key to use.
-#
-# Format:
-#
-# ./scripts/x509keyid <x509-cert> <signer's-name> <key-id>
-#
-# We read the DER-encoded X509 certificate and parse it to extract the Subject
-# name and Subject Key Identifier. The provide the data we need to build the
-# certificate identifier.
-#
-# The signer's name part of the identifier is fabricated from the commonName,
-# the organizationName or the emailAddress components of the X.509 subject
-# name and written to the second named file.
-#
-# The subject key ID to select which of that signer's certificates we're
-# intending to use to sign the module is written to the third named file.
-#
-use strict;
-
-my $raw_data;
-
-die "Need three filenames\n" if ($#ARGV != 2);
-
-my $src = $ARGV[0];
-
-open(FD, "<$src") || die $src;
-binmode FD;
-my @st = stat(FD);
-die $src if (!@st);
-read(FD, $raw_data, $st[7]) || die $src;
-close(FD);
-
-my $UNIV = 0 << 6;
-my $APPL = 1 << 6;
-my $CONT = 2 << 6;
-my $PRIV = 3 << 6;
-
-my $CONS = 0x20;
-
-my $BOOLEAN = 0x01;
-my $INTEGER = 0x02;
-my $BIT_STRING = 0x03;
-my $OCTET_STRING = 0x04;
-my $NULL = 0x05;
-my $OBJ_ID = 0x06;
-my $UTF8String = 0x0c;
-my $SEQUENCE = 0x10;
-my $SET = 0x11;
-my $UTCTime = 0x17;
-my $GeneralizedTime = 0x18;
-
-my %OIDs = (
- pack("CCC", 85, 4, 3) => "commonName",
- pack("CCC", 85, 4, 6) => "countryName",
- pack("CCC", 85, 4, 10) => "organizationName",
- pack("CCC", 85, 4, 11) => "organizationUnitName",
- pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 1) => "rsaEncryption",
- pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 5) => "sha1WithRSAEncryption",
- pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 9, 1) => "emailAddress",
- pack("CCC", 85, 29, 35) => "authorityKeyIdentifier",
- pack("CCC", 85, 29, 14) => "subjectKeyIdentifier",
- pack("CCC", 85, 29, 19) => "basicConstraints"
-);
-
-###############################################################################
-#
-# Extract an ASN.1 element from a string and return information about it.
-#
-###############################################################################
-sub asn1_extract($$@)
-{
- my ($cursor, $expected_tag, $optional) = @_;
-
- return [ -1 ]
- if ($cursor->[1] == 0 && $optional);
-
- die $src, ": ", $cursor->[0], ": ASN.1 data underrun (elem ", $cursor->[1], ")\n"
- if ($cursor->[1] < 2);
-
- my ($tag, $len) = unpack("CC", substr(${$cursor->[2]}, $cursor->[0], 2));
-
- if ($expected_tag != -1 && $tag != $expected_tag) {
- return [ -1 ]
- if ($optional);
- die $src, ": ", $cursor->[0], ": ASN.1 unexpected tag (", $tag,
- " not ", $expected_tag, ")\n";
- }
-
- $cursor->[0] += 2;
- $cursor->[1] -= 2;
-
- die $src, ": ", $cursor->[0], ": ASN.1 long tag\n"
- if (($tag & 0x1f) == 0x1f);
- die $src, ": ", $cursor->[0], ": ASN.1 indefinite length\n"
- if ($len == 0x80);
-
- if ($len > 0x80) {
- my $l = $len - 0x80;
- die $src, ": ", $cursor->[0], ": ASN.1 data underrun (len len $l)\n"
- if ($cursor->[1] < $l);
-
- if ($l == 0x1) {
- $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1));
- } elsif ($l = 0x2) {
- $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2));
- } elsif ($l = 0x3) {
- $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16;
- $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2));
- } elsif ($l = 0x4) {
- $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4));
- } else {
- die $src, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n";
- }
-
- $cursor->[0] += $l;
- $cursor->[1] -= $l;
- }
-
- die $src, ": ", $cursor->[0], ": ASN.1 data underrun (", $len, ")\n"
- if ($cursor->[1] < $len);
-
- my $ret = [ $tag, [ $cursor->[0], $len, $cursor->[2] ] ];
- $cursor->[0] += $len;
- $cursor->[1] -= $len;
-
- return $ret;
-}
-
-###############################################################################
-#
-# Retrieve the data referred to by a cursor
-#
-###############################################################################
-sub asn1_retrieve($)
-{
- my ($cursor) = @_;
- my ($offset, $len, $data) = @$cursor;
- return substr($$data, $offset, $len);
-}
-
-###############################################################################
-#
-# Roughly parse the X.509 certificate
-#
-###############################################################################
-my $cursor = [ 0, length($raw_data), \$raw_data ];
-
-my $cert = asn1_extract($cursor, $UNIV | $CONS | $SEQUENCE);
-my $tbs = asn1_extract($cert->[1], $UNIV | $CONS | $SEQUENCE);
-my $version = asn1_extract($tbs->[1], $CONT | $CONS | 0, 1);
-my $serial_number = asn1_extract($tbs->[1], $UNIV | $INTEGER);
-my $sig_type = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
-my $issuer = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
-my $validity = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
-my $subject = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
-my $key = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE);
-my $issuer_uid = asn1_extract($tbs->[1], $CONT | $CONS | 1, 1);
-my $subject_uid = asn1_extract($tbs->[1], $CONT | $CONS | 2, 1);
-my $extension_list = asn1_extract($tbs->[1], $CONT | $CONS | 3, 1);
-
-my $subject_key_id = ();
-my $authority_key_id = ();
-
-#
-# Parse the extension list
-#
-if ($extension_list->[0] != -1) {
- my $extensions = asn1_extract($extension_list->[1], $UNIV | $CONS | $SEQUENCE);
-
- while ($extensions->[1]->[1] > 0) {
- my $ext = asn1_extract($extensions->[1], $UNIV | $CONS | $SEQUENCE);
- my $x_oid = asn1_extract($ext->[1], $UNIV | $OBJ_ID);
- my $x_crit = asn1_extract($ext->[1], $UNIV | $BOOLEAN, 1);
- my $x_val = asn1_extract($ext->[1], $UNIV | $OCTET_STRING);
-
- my $raw_oid = asn1_retrieve($x_oid->[1]);
- next if (!exists($OIDs{$raw_oid}));
- my $x_type = $OIDs{$raw_oid};
-
- my $raw_value = asn1_retrieve($x_val->[1]);
-
- if ($x_type eq "subjectKeyIdentifier") {
- my $vcursor = [ 0, length($raw_value), \$raw_value ];
-
- $subject_key_id = asn1_extract($vcursor, $UNIV | $OCTET_STRING);
- }
- }
-}
-
-###############################################################################
-#
-# Determine what we're going to use as the signer's name. In order of
-# preference, take one of: commonName, organizationName or emailAddress.
-#
-###############################################################################
-my $org = "";
-my $cn = "";
-my $email = "";
-
-while ($subject->[1]->[1] > 0) {
- my $rdn = asn1_extract($subject->[1], $UNIV | $CONS | $SET);
- my $attr = asn1_extract($rdn->[1], $UNIV | $CONS | $SEQUENCE);
- my $n_oid = asn1_extract($attr->[1], $UNIV | $OBJ_ID);
- my $n_val = asn1_extract($attr->[1], -1);
-
- my $raw_oid = asn1_retrieve($n_oid->[1]);
- next if (!exists($OIDs{$raw_oid}));
- my $n_type = $OIDs{$raw_oid};
-
- my $raw_value = asn1_retrieve($n_val->[1]);
-
- if ($n_type eq "organizationName") {
- $org = $raw_value;
- } elsif ($n_type eq "commonName") {
- $cn = $raw_value;
- } elsif ($n_type eq "emailAddress") {
- $email = $raw_value;
- }
-}
-
-my $id_name = $email;
-
-if ($org && $cn) {
- # Don't use the organizationName if the commonName repeats it
- if (length($org) <= length($cn) &&
- substr($cn, 0, length($org)) eq $org) {
- $id_name = $cn;
- goto got_id_name;
- }
-
- # Or a signifcant chunk of it
- if (length($org) >= 7 &&
- length($cn) >= 7 &&
- substr($cn, 0, 7) eq substr($org, 0, 7)) {
- $id_name = $cn;
- goto got_id_name;
- }
-
- $id_name = $org . ": " . $cn;
-} elsif ($org) {
- $id_name = $org;
-} elsif ($cn) {
- $id_name = $cn;
-}
-
-got_id_name:
-
-###############################################################################
-#
-# Output the signer's name and the key identifier that we're going to include
-# in module signatures.
-#
-###############################################################################
-die $src, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n"
- if (!$subject_key_id);
-
-my $id_key_id = asn1_retrieve($subject_key_id->[1]);
-
-open(OUTFD, ">$ARGV[1]") || die $ARGV[1];
-print OUTFD $id_name;
-close OUTFD || die $ARGV[1];
-
-open(OUTFD, ">$ARGV[2]") || die $ARGV[2];
-print OUTFD $id_key_id;
-close OUTFD || die $ARGV[2];
projects / cascardo / linux.git / commitdiff