ath10k: decouple pci start/stop logic

Split logic that prepares the device for BMI
phase/cleans up related resources.

This is necessary for ath10k to be able to restart
hw on the fly without reloading the module.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h
index 010e265..00d2940 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/hif.h
+++ b/drivers/net/wireless/ath/ath10k/hif.h
@@ -46,8 +46,11 @@ struct ath10k_hif_ops {
                                void *request, u32 request_len,
                                void *response, u32 *response_len);
 
+       /* Post BMI phase, after FW is loaded. Starts regular operation */
        int (*start)(struct ath10k *ar);
 
+       /* Clean up what start() did. This does not revert to BMI phase. If
+        * desired so, call power_down() and power_up() */
        void (*stop)(struct ath10k *ar);
 
        int (*map_service_to_pipe)(struct ath10k *ar, u16 service_id,
@@ -70,6 +73,13 @@ struct ath10k_hif_ops {
                              struct ath10k_hif_cb *callbacks);
 
        u16 (*get_free_queue_number)(struct ath10k *ar, u8 pipe_id);
+
+       /* Power up the device and enter BMI transfer mode for FW download */
+       int (*power_up)(struct ath10k *ar);
+
+       /* Power down the device and free up resources. stop() must be called
+        * before this if start() was called earlier */
+       void (*power_down)(struct ath10k *ar);
 };
 
 
@@ -134,4 +144,14 @@ static inline u16 ath10k_hif_get_free_queue_number(struct ath10k *ar,
        return ar->hif.ops->get_free_queue_number(ar, pipe_id);
 }
 
+static inline int ath10k_hif_power_up(struct ath10k *ar)
+{
+       return ar->hif.ops->power_up(ar);
+}
+
+static inline void ath10k_hif_power_down(struct ath10k *ar)
+{
+       ar->hif.ops->power_down(ar);
+}
+
 #endif /* _HIF_H_ */

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 7da0983..c15b0c5 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -54,6 +54,8 @@ static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info,
                                             int num);
 static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info);
 static void ath10k_pci_stop_ce(struct ath10k *ar);
+static void ath10k_pci_device_reset(struct ath10k *ar);
+static int ath10k_pci_reset_target(struct ath10k *ar);
 
 static const struct ce_attr host_ce_config_wlan[] = {
        /* host->target HTC control and raw streams */
@@ -1734,6 +1736,66 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
        ath10k_pci_sleep(ar);
 }
 
+static int ath10k_pci_hif_power_up(struct ath10k *ar)
+{
+       int ret;
+
+       /*
+        * Bring the target up cleanly.
+        *
+        * The target may be in an undefined state with an AUX-powered Target
+        * and a Host in WoW mode. If the Host crashes, loses power, or is
+        * restarted (without unloading the driver) then the Target is left
+        * (aux) powered and running. On a subsequent driver load, the Target
+        * is in an unexpected state. We try to catch that here in order to
+        * reset the Target and retry the probe.
+        */
+       ath10k_pci_device_reset(ar);
+
+       ret = ath10k_pci_reset_target(ar);
+       if (ret)
+               goto err;
+
+       if (ath10k_target_ps) {
+               ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n");
+       } else {
+               /* Force AWAKE forever */
+               ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n");
+               ath10k_do_pci_wake(ar);
+       }
+
+       ret = ath10k_pci_ce_init(ar);
+       if (ret)
+               goto err_ps;
+
+       ret = ath10k_pci_init_config(ar);
+       if (ret)
+               goto err_ce;
+
+       ret = ath10k_pci_wake_target_cpu(ar);
+       if (ret) {
+               ath10k_err("could not wake up target CPU (%d)\n", ret);
+               goto err_ce;
+       }
+
+       return 0;
+
+err_ce:
+       ath10k_pci_ce_deinit(ar);
+err_ps:
+       if (!ath10k_target_ps)
+               ath10k_do_pci_sleep(ar);
+err:
+       return ret;
+}
+
+static void ath10k_pci_hif_power_down(struct ath10k *ar)
+{
+       ath10k_pci_ce_deinit(ar);
+       if (!ath10k_target_ps)
+               ath10k_do_pci_sleep(ar);
+}
+
 static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
        .send_head              = ath10k_pci_hif_send_head,
        .exchange_bmi_msg       = ath10k_pci_hif_exchange_bmi_msg,
@@ -1744,6 +1806,8 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
        .send_complete_check    = ath10k_pci_hif_send_complete_check,
        .set_callbacks          = ath10k_pci_hif_set_callbacks,
        .get_free_queue_number  = ath10k_pci_hif_get_free_queue_number,
+       .power_up               = ath10k_pci_hif_power_up,
+       .power_down             = ath10k_pci_hif_power_down,
 };
 
 static void ath10k_pci_ce_tasklet(unsigned long ptr)
@@ -2245,54 +2309,22 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
                goto err_iomap;
        }
 
-       /*
-        * Bring the target up cleanly.
-        *
-        * The target may be in an undefined state with an AUX-powered Target
-        * and a Host in WoW mode. If the Host crashes, loses power, or is
-        * restarted (without unloading the driver) then the Target is left
-        * (aux) powered and running. On a subsequent driver load, the Target
-        * is in an unexpected state. We try to catch that here in order to
-        * reset the Target and retry the probe.
-        */
-       ath10k_pci_device_reset(ar);
-
-       ret = ath10k_pci_reset_target(ar);
-       if (ret)
-               goto err_intr;
-
-       if (ath10k_target_ps) {
-               ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n");
-       } else {
-               /* Force AWAKE forever */
-               ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n");
-               ath10k_do_pci_wake(ar);
-       }
-
-       ret = ath10k_pci_ce_init(ar);
-       if (ret)
-               goto err_intr;
-
-       ret = ath10k_pci_init_config(ar);
-       if (ret)
-               goto err_ce;
-
-       ret = ath10k_pci_wake_target_cpu(ar);
+       ret = ath10k_pci_hif_power_up(ar);
        if (ret) {
-               ath10k_err("could not wake up target CPU (%d)\n", ret);
-               goto err_ce;
+               ath10k_err("could not start pci hif (%d)\n", ret);
+               goto err_intr;
        }
 
        ret = ath10k_core_register(ar);
        if (ret) {
                ath10k_err("could not register driver core (%d)\n", ret);
-               goto err_ce;
+               goto err_hif;
        }
 
        return 0;
 
-err_ce:
-       ath10k_pci_ce_deinit(ar);
+err_hif:
+       ath10k_pci_hif_power_down(ar);
 err_intr:
        ath10k_pci_stop_intr(ar);
 err_iomap:
@@ -2331,7 +2363,7 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
        tasklet_kill(&ar_pci->msi_fw_err);
 
        ath10k_core_unregister(ar);
-       ath10k_pci_ce_deinit(ar);
+       ath10k_pci_hif_power_down(ar);
        ath10k_pci_stop_intr(ar);
 
        pci_set_drvdata(pdev, NULL);